Adding data for shock vector control: Nozzle2D_fine

Nozzle2D_fine/jxf_case_setup.json

@@ -0,0 +1,129 @@
+{
+    "general": {
+        "case_name": "Nozzle2D_fine",
+        "end_time": 7e-3,
+        "save_path": "./results",
+        "save_dt": 5e-5
+    },
+    "domain": {
+        "x": {
+            "cells": 900,
+            "range": [0.0, 6.87],
+            "stretching": {
+                "type": "PIECEWISE",
+                "parameters": [
+                    {
+                        "type": "CONSTANT",
+                        "lower_bound": 0.0,
+                        "upper_bound": 0.21984,
+                        "cells": 800
+                    },
+                    {
+                        "type": "INCREASING",
+                        "lower_bound": 0.21984,
+                        "upper_bound": 6.87,
+                        "cells": 100
+                    }
+                ]
+            }
+        },
+        "y": {
+            "cells": 500,
+            "range": [-2.061, 2.061],
+            "stretching": {
+                "type": "PIECEWISE",
+                "parameters": [
+                    {
+                        "type": "DECREASING",
+                        "lower_bound": -2.061,
+                        "upper_bound": -0.05496,
+                        "cells": 50
+                    },
+                    {
+                        "type": "CONSTANT",
+                        "lower_bound": -0.05496,
+                        "upper_bound": 0.05496,
+                        "cells": 400
+                    },
+                    {
+                        "type": "INCREASING",
+                        "lower_bound": 0.05496,
+                        "upper_bound": 2.061,
+                        "cells": 50
+                    }
+                ]
+            }
+        },
+        "z": {
+            "cells": 1,
+            "range": [0.0, 1.0]
+        },
+        "decomposition": {
+            "split_x": 1,
+            "split_y": 1,
+            "split_z": 1
+        }
+    },
+    "boundary_conditions": {
+        "primitives": {
+            "east": {"type": "ZEROGRADIENT"},
+            "west": [
+                {
+                    "type": "SIMPLE_OUTFLOW",
+                    "primitives_callable": {
+                        "rho": 1.1608739058763438,
+                        "u": 0.0,
+                        "v": 0.0,
+                        "w": 0.0,
+                        "p": 1e+5
+                    },
+                    "bounding_domain": "lambda y: jnp.abs(y) >= 40e-3"
+                },
+                {
+                    "type": "DIRICHLET",
+                    "primitives_callable": {
+                        "rho": 5.1970438957214355,
+                        "u": 80.68822479248047,
+                        "v": 0.0,
+                        "w": 0.0,
+                        "p": 442850.0625
+                    },
+                    "bounding_domain": "lambda y: jnp.abs(y) < 40e-3"
+                }
+            ],
+            "north": {"type": "ZEROGRADIENT"},
+            "south": {"type": "ZEROGRADIENT"},
+            "top": {"type": "INACTIVE"},
+            "bottom": {"type": "INACTIVE"}
+        },
+        "levelset": {
+            "east": {"type": "ZEROGRADIENT"},
+            "west": {"type": "ZEROGRADIENT"},
+            "north": {"type": "ZEROGRADIENT"},
+            "south": {"type": "ZEROGRADIENT"},
+            "top": {"type": "INACTIVE"},
+            "bottom": {"type": "INACTIVE"}
+        }
+    },
+    "initial_condition": {
+        "primitives": {
+            "rho": 1.1608739058763438,
+            "u": 0.0,
+            "v": 0.0,
+            "w": 0.0,
+            "p": 1e+5
+        },
+        "levelset": "lambda x, y: jnp.zeros_like(x)"
+    },    
+    "material_properties": {
+        "equation_of_state": {
+            "model": "IdealGas",
+            "specific_heat_ratio": 1.4,
+            "specific_gas_constant": 287.14
+        }
+    },
+    "output": {
+        "primitives": ["density", "velocity", "pressure", "temperature"],
+        "levelset": ["volume_fraction", "levelset"]
+    }
+}

Nozzle2D_fine/jxf_numerical_setup.json

@@ -0,0 +1,76 @@
+{
+    "conservatives": {
+        "halo_cells": 4,
+        "time_integration": {
+            "integrator": "RK3",
+            "CFL": 0.6
+        },
+        "convective_fluxes": {
+            "convective_solver": "GODUNOV",
+            "godunov": {
+                "riemann_solver": "HLLC",
+                "signal_speed": "EINFELDT",
+                "reconstruction_stencil": "WENO5-Z-ADAP",
+                "reconstruction_variable": "CHAR-PRIMITIVE"
+            }
+        },
+        "positivity": {
+            "is_interpolation_limiter": true
+        },
+        "dissipative_fluxes": {
+            "reconstruction_stencil": "CENTRAL4-ADAP",
+            "derivative_stencil_center": "CENTRAL4-ADAP",
+            "derivative_stencil_face": "CENTRAL4-ADAP"
+        }
+    },
+    "levelset": {
+        "halo_cells": 2,
+        "model": "FLUID-SOLID",
+        "nozzle_geometry": {
+            "derivative_stencil_normal": "CENTRAL2"
+        },
+        "interface_flux": {
+            "interpolation_dh": 0.5,
+            "is_cell_based_computation": true
+        },
+        "extension": {
+            "primitives": {
+                "method": "ITERATIVE",
+                "iterative": {
+                    "CFL": 0.5,
+                    "steps": 5,
+                    "is_jaxwhileloop": false,
+                    "residual_threshold": 1e-14
+                },
+                "interpolation": {
+                    "is_cell_based_computation": true
+                }
+            }
+        },
+        "mixing": {
+            "conservatives": {
+                "volume_fraction_threshold": 2e-1,
+                "mixing_targets": 2,
+                "is_cell_based_computation": true
+            }
+        }
+    },
+    "active_physics": {
+        "is_convective_flux": true,
+        "is_viscous_flux": false,
+        "is_heat_flux": false,
+        "is_volume_force": false,
+        "is_surface_tension": false
+    },
+    "precision": {
+        "is_double_precision_compute": true,
+        "is_double_precision_output": true
+    },
+    "output": {
+        "derivative_stencil": "CENTRAL4",
+        "is_xdmf": false,
+        "logging": {
+            "frequency": 1
+        }
+    }
+}