Datasets:
embedding-data
/
Amazon-QA

Dataset card Data Studio Files
xet
Community
1
query
stringlengths
20
2.05k
pos
list
Thanks to all for the answers about the correct cable to use!
[ "Vanco 200-007-50 RG6 Quad Digital Coaxial Cable with Premium Gen II Compression Connectors (Black 50 Feet)", "Any RG 6 coaxial cable will be fine; use quad shield if subject to electrical interferrence. Antenna has built - in matching circuitry so the cable hooks up directly to an F connector on the antenna, no need for a matching transformer.", "There is a connection at the antenna called a BALON I think. It convertes the 300 ohm from the antenna to 75 ohm. Then you can use a RG-6 coax cable from there. I did find that the transformer on the antenna didn't work. I put an external one on and it worked ok. Hope this helps you.", "I used \"Mediabridge Coaxial Digital Audio Video Cable - (50 Feet) - Triple Shielded, F-Pin to F-Pin with Easy Grip Connector Caps\" from Amazon. This is RG-6. Works like a charm." ]
Will this decal stick to textured walls?
[ "It will but it won't look as nice as if it was on a smooth surface. I had my daughter's name and last name done. I applied her last name first on my textured wall and it didn't look very good. It made the \"pumps\" stand out even more. It looked like the decal was wrinkled and unprofessional. So I applied her name on a different wall (smooth surface). It looked amazing! I recommend to use a smoother surface. The product itself is great but test a small piece of the decal first before applying the entire decal. I hope this helps." ]
how long are the wires on the pump
[ "Wires need to be spliced. They give you just enough wire to make a decent splice. Otherwise order a kit that provides switch etc." ]
Does this product come with mounting hardware?
[ "No, it doesn't. I used self-tapping bolts and drilled through the toolbox and down into the trailer frame. Four bolts and it's very secure" ]
how would you reload more cans on the bottom 2 rows so that the most recently bought was in the back, without taking everything off the shelf?
[ "It's not a big deal. Just take out the can from the individual section and load the others behind it. The bottom section is usually divided into three divisions.", "I usually reload when I get down to two cans, remove those and put the most recent purchase on the rack and replace them. I seeems that this could/would be a hassle, but it isn't. :)", "I don't know of a way to reload from the back. If you want to keep the older cans forward, you may have to take them off and rearrange.", "I keep the cans organized by what they are and usually don't buy that product until I get down to 1 or 2 cans left. When I restock I simply take out the cans that are there, put in the new supply and replace the older. It really only takes a few seconds and is well worth not ending up with outdated food supplies.", "You really can't unless you have the device placed in such a way that you could reach your hand around to the back of it, say from the side. No easy answer on this one. But you probably won't normally be reloading the whole thing constantly, so rolling out a few cans to stick a few in first shouldn't be too much of a problem. I love this thing and have all ready gotten another." ]
How fast does it scan a black and white page?
[ "Quickly--you just run the page through the scanner and it copies-- a matter of seconds." ]
Will it work on Canon Pixma MX712 ? Thanks!
[ "No the MX712 uses PGI-225 and CLI-226 ink. You need this resetter http://www.amazon.com/Resetter-powered-batteries-Conveniently-computer/dp/B0058S42EY", "Sorry, this chip resetter will not work with the cartridges in the MX712. It is designed to work with 5 and 8 series cartridges while the MX712 uses 225 and 226 series cartridges.", "No the MX712 uses PGI-225 and CLI-226 ink. You need this resetter Canon Chip Resetter for PGI 225 and CLI 226, USB powered(No batteries Needed. Conveniently plugs into your computer)" ]
Is there an attachment for mounting a camera?
[ "only if you get a light stand camera mount piece to go on end. Its a normal light stand end on both pieces.", "You probably could since it has a standard 1/4th inch threaded stud on the end, but it's not really meant for mounting a camera. It's made for mounting a speedlight or studio strobe, and would give you limited options for positioning a camera.", "This is not the intended purpose for this unit. It is meant for flashes or lights. However, you could attach a camera if your camera has a 1/4 20 screw hole on the bottom or by using an adapter bracket that connects to a 5/8 stud or attaches to a pole like a super clamp or magic friction arm." ]
Is the belt included with the pants?
[ "Yes, but it is about 4 inches longer than it needs to be for the waist size of the pants. It is a decent belt, but it is prone to sag a little over time if you put weight on it like a belt-holster with a full size pistol. Even a Glock tends to weigh it down a little. I ended up buying a Blackhawk belt that puts up with the weight a little better." ]
can this be used if rock rails are already on Jeep? Or would the rails have to be taken off?
[ "Pretty sure it is either or...depends on how the rails attach...These are mostly cosmetic and for a foot up for the spouse or on a lifted rig...most of the rock rails I've seen would interfere with attachment. Look for a hybrid style that you could slide over an occasional rock.", "I would say yes you would have to take off what you have to install these. They probably are similar to what you have. They bolt up in the existing bolt holes on the bottom flange of the frame", "No, you will need to remove the rock rails to install the side bars/nerf bars." ]
Any tips for getting my gate to slide onto the wall mount? The video makes it look so easy but mine stops at about one inch down.
[ "Here's the deal. You purchased an attractive, but poorly manufactured gate. So did I and welcome to the club. It only gets worse from here, so if you're smart you shod return it and purchase something else. If you are dumb and stubborn like me, by all means keep it and suffer the consequences. The reason your gate doesn't slide down is most lily because it's getting hung on the screw heads. The holes need to be countersunk deeper than they are to accomosh this. A countersink bit is too wide to fit into the trough to accomplish this, so you or your mignon will need to do this using a 1/4\" (ish) drill bit and further counter sink the hole creatively. The good news is that the rail is aluminum, which is very soft and makes this doable. After this is done, you should be able to slide the gate in with relative ease. Then you'll be home free for a few months until it needs a mystery adjustment. Good luck!", "Sometimes if your wall is not perfectly flat and if the screws are too tight it can rack the aluminum channel a little. Try loosening the screws just a very little and see if that helps. If not, then you might want to try a lubricant such as wax and see if that helps. Beyond that information I do not have any other experience. Ours got better after several uses. Good Luck." ]
Does it come with strong smell? I am tried of the paste with strong smell.
[ "It's a faint floral smell. I wouldn't classify it as strong. They have some sample sizes available and I would suggest you try it before you invest in the large container. It is a generous amount.", "It has a light scent. It's not perfumey at all though. I am able to use it on both my daughter and my son.", "many a little smell but its refreshing if its there not no not strong and I love the paste you can just rub it between your hands apply to hair and you are good to good, my hair is short and this puts just a little curl in and helps my fine hair stay put, love this stuff" ]
How many pounds does it hold up to
[ "My 6 year old granddaughter likes to use her Minnie roller luggage for travel and sleepovers. She loads it up with clothes, books and stuffed animals. At heaviest she has toted about 10 to 15 lbs. any more than that would be extremely difficult for a child to tote about especially during travel. It's a small bag tailored just for children but given that children's clothing is smaller too this bag will carry a good weeks worth of outfits, shoes, undergarments and swimsuits. hope this information is helpful to you!", "Not sure. I can post in a couple of weeks because we will be using it for the 1st time next week.", "I havent used it yet but I can tell you that I have sandals, water shoes, 5 days of under clothing, 2 sets of pjs, beach towel, bathing suit, bathing coverup and 5 outfits and there is still room if I wnated to add more.", "I'm not sure how many lbs. I have put 1 weeks worth of (spring/summer) clothes and 2 pairs of shoes in there and it fits fine. My daughter is 5 years old she loves pulling it thru the airport." ]
Need to install their own? You are not alone, a chair, packing how much volume?
[ "I was able to instal it by myself. You need a screwdriver and some time: about 5-10min per chair", "Hi, I am not sure to understand your question. So yes, you need to install the legs. Regarding the package, it's quite bulky but super light.", "You install the legs. Not difficult at all. Large box due to the seat being molded. Very well packed and very easy overall" ]
I just opened up my Soft-Tex SensorPedic® Classic COMFORT Traditional, and the memory foam odor is terrible! How long does it take to go away?????
[ "my pillow really didn`t have a odor, but in you`re case I don`t see why a little air fresher would`nt hurt & then let it air out for a day", "It was noticeable and made me wonder if this was toxic. I let it air out in another room the first night and I didn't use it.", "It gets milder but it's still there. I sleep with a CPAP machine so I really don't smell it until I take the mask off.", "Yes. It is strong. Leave it without a pillowcase on it. Probably in a room you don't use very often for at least a week. Maybe 2. Go by and squeeze it every now and again. The good news is once it's gone it doesn't come back and you are left with a pretty good pillow." ]
Can this be used with B shutter? for example, to expose 1 hr with B shutter with a human holding the button for 1 hour.
[ "I suggest you look at the manual. http://www.aputure.com/cache/upload/download/dital_timer_remote_shutter.zip", "Yes it can. The button also locks so you don't have to hold it for long exposures", "The timer can be set for more than an hour so you can do long exposures just using the timer." ]
Do you think there is enough head room for a three year old to be comfortable? I want this to grow with my twin grandbabies.
[ "I guess it depends how big your 3 yr old is... I personally feel yes there is enough room, my kids are almost 2 but they are pretty big (they do wear 3T clothes now) and they are still comfortable.", "I have a good sized 3 year old who uses it comfortably. Plenty of head room.;) Just be aware that there is very little storage space.", "Yes, it's actually bigger than I thought, and both my 2 year old and 4 year old seem comfy in it." ]
I have big (52mm+) Invicta watches, so I need a box that will fit them... could anyone tell me the measurements of each compartment?
[ "Sorry I can't measure. I gave it as a gift to my son. He puts his larger Michael Kors watches and Tag. The box is nicely made. I was very impressed.", "I have a 48mm Breitling and there is no problem. It depends also on how many watches you have and howccrowded the watches would be. I can tell you that for the money this watch box is excellent in quality" ]
what are the dimensions? The size is not listed. I can't buy it or replacement paper if I don't know the size!
[ "it is 7\" x 8 1/2\" and the Masterson Sta-Wet Acrylic papers fit perfectly. I couldn't find a sponge replacement that size so I cut one of the large ones to fit. it keeps the acrylics moist for several days and I spray them occasionally to help keep them wet. I don't get to paint every day so that helps. I like the small palette better than the big one for small paintings, which I do more often, as it is easier to open and close and keep at hand. hope that helps !" ]
Is there a way to tell if this is comparable with our apple time capsule router?
[ "I have an apple airport extreme router and it did not work at first. I changed the router settings from \"Bridge mode\" to \"Share an IP address\" and it worked fine", "Yes, so long as you have an open gigabit Ethernet port open in the back, which you'll have to plug directly into", "In sure it, u just connect it to ur router via ether net cable and that's it it's super simple it controls garage at other end of my house which is 80ft plus away. Works great and simple" ]
Mine came with no instructions. How do you adjust the volume?
[ "I have no idea!!! Mine didnt either and the screen was all scratched up soi havent even tried to use it. sorry", "Mine didn't have instructions either. I can't figure out anything. I think I need to find a 10yo kid to work it. What a waste." ]
Can this sand be used to burn coals on?
[ "I have not tried that, but I would think that would be fine. It's pure so there wouldn't be any fumes. I'm afraid I don't have any experience burning coals over sand, but I can say this is premium sand." ]
Is inverting the HDMI switches possible? I'm going to buy a LCD HDTV and I have an Optoma front projector. Can I take the output from one DVD player and have the switcher output to either the TV and the projector via the switch position? Since this is a pass-thru box is it possible? Is inverting the HDMI switches possible? I'm going to buy a LCD HDTV and I have an Optoma front projector. Can I take the output from one DVD player and have the switcher output to either the... » Read More Is inverting the HDMI switches possible? I'm going to buy a LCD HDTV and I have an Optoma front projector. Can I take the output from one DVD player and have the switcher output to either the TV and the projector via the switch position? Since this is a pass-thru box is it possible? « Show Less
[ "First of all, it is not a \"pass-thru\" box. It has two diodes that prevent this setup you are trying to accomplish. The one way system only works one way. However, simply removing the 4 screws, using wire cutters to snip the diodes off, and soldering the two ends together DOES accomplish what you are trying to do. I did purchase this with the assumption that Mr. Hayward's post was accurate. Only to find that it did not work as suggested. So, off to the workshop, soldering job done, all works great now.", "Hi, I took a gamble when I bought this switch and I currently have it connected similar to what you asked, monitor connected to input 1 (DVI-Female to HDMI Male adapter), lcd-tv connected to input 2, and PC connected to the output (DVI-Male to HDMI adapter).It is working fine in this manner. Hope that helps." ]
Where is this product made pls?
[ "It is made in China. The box appears to be made with quality material. Also, I follow the direction on hook up and so far it works well." ]
How does this blanket compare to the Soft Heat Luxury Micro-Fleece Low-Voltage Electric Heated Blanket without ribs that costs $99.99?
[ "The soft heat ultra micro=plush is the worse heated blanket that I have ever owned - it takes forever to warm and never ever gets very hot - my husband hates it also - he has gotten so use to a much hotter heated blanket to keep him warm during the night that and we purchased this blanket prior to Christmas and it is raveling out terribly. So very disappointed with this purchase and will not ever purchase anything like it again.", "I'm not sure how it compares but my wife and I love this blanket. I never turn it hotter than 4 and I'm perfect all night!", "I have no basis of comparison to the $99.99 blanket, but we love our micro-fleece. I can't imagine why anyone would want a hotter blanket. I have never turned my side up to more than three, and usually I set it at 1 or forget to turn it on. My husband keeps his side at 4 or 5. The fabric is soft and fine to the touch. We do use a light cotton cover over the top to keep it clean, and surely that helps to keep in the heat. But we always have done this with electric blankets. This blanket is way nicer than any we have had before. /jgh" ]
Does it use the Google app store and will it work okay with NET10 service?
[ "\"yes it has the latest version of playstore and downloading new apps is a breeze\"" ]
Can this bed be inflated using an external pump also? Want to use it for camping, and won't have AC power.
[ "NO. only an internal pump is supplied which needs an electrical outlet. In any event, I threw the bed away after three attempts at keeping it inflated and failed each time. Garbage. I guess one gets what they pay for.", "Unfortunately, not, as the pump is internal. Unlike another comment, I have used this bed with adults three times and it never lost inflation (this was a male adult who weighs about 160). I have other Intex inflatable mattresses without the built in pump and they work well for camping options." ]
Can this set be painted without sanding it? I want to paint it white. Thx.
[ "No. It's already treated. You would have to completely sand it down if you wanted to paint it. And I would not recommend painting it anyways." ]
will it fit in a golf cart drink holder?
[ "It should fit as it does fit in my car cup holder and the cup holders should be the same size. Hope this helps.", "The part to fit in cup holder is tapered from 8 3/4\" up to the ridge at 9 1/2\" outside diameter. That portion is a little less than 3\" tall. Hope this helps.", "Don't know. Was never in a golf cart. The bottom is very narrow and the top is very wide, so it is top heavy and doesn't fit into a car cup holder." ]
What length inseams will this bike accommodate?
[ "I am 5'10\" with a 32\" inseam, my wife is 5'3 with a 29\" inseam and the bike fits us great. She can go down another 2-3\" if needed, and I can go up another 2-3\" if needed. I bought 2 bikes, one for the wife and one for me...we love them, they are still running strong after many miles....if your looking for a good ol spin bike without a bunch of fancy electronics then this is the bike for you" ]
Is there an expiration date stamped on the package? In the pic I see a code but not a date.
[ "Yes, the date is stamped on the back. I ordered mine September of 2013 and the date stamp was good to June 2015. They are very good quality.", "My expiration date is: 03/2015. I found it on the back of the package on the brown portion along with the Lot #1574467A. Hart to read black printing on a brown/black patterned shiny plastic bag. Hope this helps. If not contact Now Foods with the code and they should be able to give you a \"best\" or \"sell by\" date.", "Same with me. The expiration date is in the brown part so you wouldn't be able to see it on the picture." ]
How wide is the blade? I'm looking for a small clipper just for the face, quiet, corded & great quality! Any suggestions if this does't fit the bill?
[ "How big is your pet. I own the bigger model and it works very well on my standard poodle. It's very quiet and doesn't vibrate much and great for clipping close to her eyes. Hope this helps.", "The blade is 1 1/2 wide. I use it for my toy and mini poodles and it works well on the face. It is QUIET and can be used corded or not. Excellent clipper!", "I bought these clippers for my Toy Schnauzer's face and it works perfectly!!! Especially for the ears and between his eyes! I use regular Arco clippers for the rest of his face and body. Not sure the width of the blade though.", "The blade is 1 1/2\" wide, and we use it to trim around horn buds (before disbudding) and trim faces on Nigerian Dwarf goats. We're pleased because it's small, quiet, and can be corded or uncorded.", "It is 1.5 inches. This purchase was a replacement. My first one lasted 10 years. I highly recommend it.", "The blade looks to be about inch or so. I use it on my chines crested face and it is perfect size. I have bought 2 of these and love it, it is quiet does not get hot and shaves my hairy hairless perfectly and fast. It is also cordless and the charge last forever." ]
how long did it take to get your product from this seller?
[ "We're located in Los Angeles, we do the same day shipping and the cutoff time is 3:00pm pacific time. it normally take 3-5 days for domestic shipping." ]
does this fit a 2007 Toyota Camry?
[ "Not this model Fram filter...you need CF10285. Try this link: http://www.framfreshbreeze.com/Installation.aspx?yr=2007&me;=TOYOTA&ml;=CamryThis is a great filter, good luck.", "Not this model Fram filter...you need CF10285. Try this link: http://www.framfreshbreeze.com/Installation.aspx?yr=2007&me=TOYOTA&ml=Camry This is a great filter, good luck." ]
what is the measurement
[ "Hi Betty,The size of the one I ordered is approximately 67 inches long by 24 inches wide. I think I ordered the larger of the two sizes. The one that says \"queen\" size. I have a full size bed and it fits good with about 7 inches hanging over each side of the bed. I wanted to make sure it covered the entire foot of the bed, and it does.", "Approximately 3'X2' lays from side to side. I do not like mine; takes too long to warm up and I keep it on high and it is not warm enough. Sorry, I couldn't be more positive.", "Mine measures at 24 inches by 44 inches. It sets on the bed with the 44 inches going side to side. Hope this helps." ]
Can you plug headphones into this so only the drummer can hear it.
[ "Yes you can but you will need a 3.5 mm to 1/4 jack in order to do so or have studio headphones that already have the 1/4 jack.", "Yes, you can, but obviously there's a lot of noise from the beating of the drum pads themselves.", "Yes you can, but you will need an adapter if you plan to use headphones with a 3.5mm plug", "Well, yes and no: There is a headphone jack, but drumsticks making contact with the drum pads does make some noise. So the short answer might be \"yes, mostly.\"", "Yes you can. It has the larger headphone jack though, so you'll need an adapter if you have the standard 3.5mm endpoint." ]
Can you stack two of these
[ "Not sure but I would not try to stack the units/please read my review on this product...On my unit one of the welds broke and the wheel came off.....Not sure how you would stack with the wheels on the bottom of the unit???", "There's nothing to secure them so I don't think you can. I would not recommend it as they are very heavy." ]
Is this a old version or new version of this device.
[ "I do not know anything about the history of this device. All I know is that it works perfectly with my iPod Nano and Plantronics wireless headphones but does not seem to pair with my new Samsung Circle headphones.", "Pretty much like the old in looks but it performs fantastically! I recommend it." ]
Will this work with a Studio Projects B1? Is it compatible?
[ "No, it doesn't fit the B1. We purchased both and were disappointed that it didn't fit." ]
Can you use a 60 watt CFL bulb in this lamp instead of a 150 watt?
[ "I'm sure you can use a 13 watt CFL bulb in this lamp (60 watt standard bulb equivalent). I have a 20 watt CFL (75 watt standard bulb equivalent) in mine and have had no issues. Have to turn switch 2 times to turn on since this is a 3 way 150 watt lamp, but that doesn't bother me any." ]
How can I get the attachment to stay on?
[ "I have not had a problem with them coming off I just slide them on, my dryer is very very noisey", "Actually the two attachments (combs) can stay strongly on the styler by sliding it onto the styler. However, the bristle head is really too wide to stay long enough. That is my experience with it. What I tried to do is to do it slowly and carefully and mostly tend not to use the last attachment because of this but i guess this is not what you should be doing with your styler it should be easier to use all the attachments.", "You can't. It's defective. Conair keeps selling these defective hair dryers and won't refund you. Hopefully you only bought one instead of the two defective ones that I bought. :(", "You can't. Once it heats up, the brush falls off. I sent it back and bought the Conair Infiniti Pro. I love it." ]
Is it made in Germany or China?
[ "Mine was made in Germany. It works well on eggs, but if you're looking for it to slice fresh mozzarella it doesn't do the trick." ]
Can it hold an iPad? Or Kindle?
[ "I suppose you could pull out the tray and depending on what type of power cord you are using you might be able to, but it is not designed for that. I just lay mine on the table in front of the station and use one of the cords I have strung through it.", "No. It would on the top if you want, but the phone slots fit my iphone 6 perfectly, just a bit small for the galaxy 5 but it still works." ]
Do standard sheets and mattress protectors work with this mattress? If not, do you have recommendations?
[ "Standard sheets will work fine, I am not quit sure about mattress protectors though. However this mattress did not come in the size of a queen mattress as displayed, it came as a full, so if you have queen sheets they will sag and be very baggy on this mattress.", "Standard queen sheets do work--I've put on fitted and normal sheets without issue. I've never used a mattress protector, but it should work. Size-wise should fit fine, unless it's the the ones where you need to stretch it around the corners--this is about twice the thickness as a standard mattress, so anything that needs to fit around the bottom itself and not stretch around the sides could have an issue." ]
what type or size of m.2 ssd does the motherboard support?
[ "I'm using a \"Crucial M500 M.2 2280 120GB SATA III MLC Internal Solid State Drive (SSD) CT120M500SSD4 \" that I caught on sale for $46 for boot and antivirus, with a 500GB ssd for pgms and a 1TB for snapshots and data. No problems with install from optical disk, no problems running Win7. Not any faster than a standard ssd. Consider what you will do when the M.2 ssd fails, do you have a back up replacement ready to go? Or will you revert to a standard ssd?", "Here is a list of compatible devices for the motherboard: http://dlcdnet.asus.com/pub/ASUS/mb/LGA1150/Z97I-PLUS/Z97I-PLUS_Device_report.pdf Page 4-5 lists the M.2 SSDs that are compatible. Any that following similar specifications should (this is a keyword: should) work.", "It will accommodate 42mm or 80mm m.2 cards. I use a 512gb Samsung 850 EVO (you'll need to move the standoff to the 80mm position)" ]
I have been flying the Super Cub S using the DX4e. Will this work with the UMX Radian? I will be upgrading but not just yet if I can avoid it. Any suggestions on the DX5e or DX6i? Appreciate any suggestions! I have been flying the Super Cub S using the DX4e. Will this work with the UMX Radian? I will be upgrading but not just yet if I can avoid it. Any suggestions on the DX5e or DX6i? Appreciate any... » Read More I have been flying the Super Cub S using the DX4e. Will this work with the UMX Radian? I will be upgrading but not just yet if I can avoid it. Any suggestions on the DX5e or DX6i? Appreciate any suggestions! « Show Less
[ "Yes, the DX4e will work with the UMX Radian. If you upgrade I would recommend the DX6i, but for the money I would recommend the Orange Rx T-SIX, it is compatible with all Spektrum receivers and is a fraction of the cost and is of equal quality in my opinion. https://www.youtube.com/watch?v=7PxeVMFaeiU" ]
I can't get it open to put in batteries
[ "I have a couple of different types of these. This one is a little stiff to open. Some of them you have to press down on the cover while turning to open it. Try that. If it doesn't work I'll get mine in hand and talk you through it.", "That means the O-ring is making a good seal but they tend to also grip! With the light facing away from you and right-side-up, the right hand end unscrews. I just grab both ends and twist till it comes loose. Maybe a little hot water run on the end cap would help, maybe not. If it's really stuck bad, wrap a rag around the cap and use pliers for leverage but be gentle. Also, be careful not to cross-thread the threads when you put it back together. It's easy to mess that up because the threads are fairly fine. Just push it in against the spring and then go backwards till the threads click into place and it should screw together easily till you feel the O-ring squish a little. That means the O-ring is making a good seal but they tend to also grip! With the light facing away from you and right-side-up, the right hand end unscrews. I just grab both ends and twist till it comes loose. Maybe a little hot water run on the end cap would help, maybe not. If it's really stuck bad, wrap a rag around the cap and use pliers for leverage but be gentle. Also, be careful not to cross-thread the threads when you put it back together. It's easy to mess that up because the threads are fairly fine. Just push it in against the spring and then go backwards till the threads click... » Read More That means the O-ring is making a good seal but they tend to also grip! With the light facing away from you and right-side-up, the right hand end unscrews. I just grab both ends and twist till it comes loose. Maybe a little hot water run on the end cap would help, maybe not. If it's really stuck bad, wrap a rag around the cap and use pliers for leverage but be gentle. Also, be careful not to cross-thread the threads when you put it back together. It's easy to mess that up because the threads are fairly fine. Just push it in against the spring and then go backwards till the threads click into place and it should screw together easily till you feel the O-ring squish a little. « Show Less" ]
What is the size of the lamp base that sits on the floor H x W X L (the base NOT the whole lamp)
[ "12\" is a small estimate. Most importantly, it isn't topheavy or \"tippy.\" I believe it's about 13 to 15 inches." ]
Is this detector UL listed?
[ "It meets Euro code, but not UL or CSA. Thus, it is not approved for code-required installations.", "I just bought this detector, and I saw your question pop up. I checked the unit before I installed it, however, I could not find any UL stamp or sticker on the device, so I'm assuming its not. It does have a CE sticker, so it is certified European Union, I think the two standards are very close, but I could be wrong. Hope this helps!" ]
Will this work with a Native Union Retro POP Phone - Black - Wired Headsets?
[ "any thing that I own with a 3.5mm jack works in this plug. I looked it up and the retro-pop-phone has a 3.5mm jack, so it should work fine." ]
How high does this sit on a wasr- 10?
[ "http://cdn.gun-tests.com/media/newspics/288/Century-Arms-WASR-10-Bridge-Mount-Optic.jpg", "I cant speak for a WASR but on my SLR107,DDI milled AK,Waffen Werks AK74 fits perfect not to high not to low.", "Not sure on wasr-10. It has lowest profile of any ak side rail mount I own. Highly recommend this mount. Be careful there are lots of knockoffs of this mount. Make sure you buy from reputable dealer.", "It sits great. Problem is mine came canted. Checked on my WASR and Arsenal on both canted to the right same angle . I bought it to use with red dot so was able to fix it with that. I saw some people were complaining about rail being canted. I guess just my luck. Otherwise it sits nice and snug , very low above dust cover and holds zero. I hope that was helpful", "On a WASR it sits about 1/4 inch above dust cover. It is very easy to install or remove & the clamping system gives it a very tight fit . This thing is well engineered & well made." ]
Owners of this pack: Do you think you could fit both a MacBook Air & a MacBook Pro in it plus a book or 2???
[ "you could put both in, I put my air 13\" in and there's plenty of room for another, would probable fit a 15\" pro in it too." ]
Plugged in sound bar optical cable and optical cable from cable box, LED lights were on a few seconds now I have NO power or LED lights??? Any ideas
[ "Don't know. Mine has worked perfectly since first plugged in--amazing for such an inexpensive device!", "if the lights went off,probably broken!send it back for a new one.mine is working perfectly the lights are on everytime.check it out too if there is sound coming out the speakers.if not,simply send it back coz that thing is broken!", "sounds like you may have to send it back, but you can at least plug in another power supply, or test the units power supply on another 5 volt system, just to see what is broken. I have mine plugged into one of the USB ports on my TV, that way it powers off with the TV so I don't see a power light, it must be on the power supply it self. maybe moving it to another outlet might help to isolate the problem, just in case it was the outlet, saving you the trouble of sending it back. Good Luck!" ]
How long have you owned it? and CFM comparison Does this Datavac come with the standard 1yr warranty? For those who own this product, can you tell me how long have you owned and it is still working? What is the CFM on a regular cool air canister blower? How long have you owned it? and CFM comparison Does this Datavac come with the standard 1yr warranty? For those who own this product, can you tell me how long have you owned and it is still... » Read More How long have you owned it? and CFM comparison Does this Datavac come with the standard 1yr warranty? For those who own this product, can you tell me how long have you owned and it is still working? What is the CFM on a regular cool air canister blower? « Show Less
[ "Got mine about a week ago and this thing blows canned air out of the water. The motor has a 5 year warranty on it and it's really the only part I would worry about breaking since it's really the only moving part", "It has a filter on the bottom, so just keep that clean and it should never lose CFM. You can wash it with water as it is plastic, just make sure it's dry when you reinstall.", "I've owned for 5 years now. I use for everything too, blowing of computer parts sure, but also cleaning filters, blowing out crevasses when detailing my car or cleaning house.", "I've owned mine since February 2013. I use it three or four times a year and it has the appearance that it will last a good long time. It's already way earned it's keep compared to canned air.", "I've owned one for two years and use it almost every day. It's built like a tank in America. Not some cheap Chinese junk." ]
does the otter box cover the entire phone ?
[ "No it does not, it comes with a screen cover that you have to install yourself", "The whole back, (hole for camera/flash/Mic), covers the sides, comes with buttons to put over for volume.flaps to cover charger port and headphone jack. Does not cover screen but partially covers the outer black part of the phone.blue is hard plastic. Grey is a rubber.", "Linda, if you are looking at the picture here, it seems as if it does cover the ENTIRE phone but it doesnt. The cover does cover the entire BACK of the phone and is open in the front. They split the picture so you can see how it looks both ways.", "It covers everything but the screen. They give you a screen protector to place yourself, though. It will also cover the Jacks for your phone." ]
Are these noodles gluten free?
[ "I just checked a package. The #1 ingredient is enriched wheat flour and the package doesn't say gluten free. So, I seriously doubt they are gluten free. Sorry!" ]
How can I find replacement foam bullets?
[ "most Nerf, or similar brand, will work and fire from the crossbow. Some even have suction cup tip for shooting at target.", "Order more foam darts here: http://www.amazon.com/NXT-Generation-Crossbow-Projectile-Kit/dp/B000XA7WWQ/ref=sr_1_1?ie=UTF8&qid=1382023722&sr=8-1&keywords=darts+nxt+generation" ]
Olympus SW 790 Is this the best version of the Olympus SW series......?
[ "It is the newest, least expensive and I think the most attractive of the rugged series (720, 770 and 790). I think the 720 screen could be viewed better in direct sunlight, the 770 you can have in deeper water (waterproof 33 ft vs. 790's 10 feet). But of the three, the 790 is the one I'm buying- it looks the best and fulfills my need of being a camera I can take to the pool and on vacation and can even drop (having previously broken a Kodak and a Canon camera due to my clumsy nature) without ruining." ]
What are the system requirements for an iMac?
[ "On the box it says direct connect requirements: Mac OSx v 10.3 or later with USB Software requirements for Olympus Viewer: Mac OSx v10.4.1 -v10.6 You should have no issues, it comes with a software CD-ROM that will help with the processing of images, but even iPhoto will allow download and basic editing of images as well as video download direct from the camera or from a card reader without the proprietary software. I looked through my manuals and didn't see a listing of requirements. The software included is comprehensive but very slow, frustratingly so. If you are not doing heavy editing and just sharing your pictures I would avoid it." ]
would the light have to be on to listen to music?
[ "The bulb has to be powered to listen to music but using the remote you can turn off the light (or dim it) and just stream the music. The wall switch or the light fixture switch has to be on though.", "You can have the light on or off while music is playing; there is a button on the remote control to turn lights on or off.", "The remote has a button to turn the light off and on, so you can listen to music without the light on. By the way, I have had this light now for a year, and it's still the best Bluetooth Speaker and Light combo I have ever purchased." ]
is this bat legal for little play in 2014
[ "It depends on the rules for your Little League, but some leagues (like my grandson's) limit a bat's diameter to 2-1/4 inches like this bat. Other leagues allow for a bigger diameter bat. I'd say check with the little league where your child will be playing. Incidentally this bat was a huge hit with my grandson and many of his teammates." ]
spare battery for my SD 790 -- aftermarket or Canon I'm mulling on buying the Lenmar DLC5L Lithium-ion Digital Camera/Camcorder Battery Equivalent to the Canon NB-5L Battery (it's a 1100 mAh battery that is 1/4 the price of the Canon stock battery) as a cheap spare, just to have until my Canon battery can get recharged. I've read the many reviews -- they are all over the map. My question is: besides the battery possibly (or likely, according to some reviewers) crapping out, could this battery in any way do any harm to my 790? That would be a dealbreaker. I'm willing to take a risk that it will be a sub-optimal item, or even a dud, but I don't want to hurt my precious. ;) spare battery for my SD 790 -- aftermarket or Canon I'm mulling on buying the Lenmar DLC5L Lithium-ion Digital Camera/Camcorder Battery Equivalent to the Canon NB-5L Battery (it's a 1100... » Read More spare battery for my SD 790 -- aftermarket or Canon I'm mulling on buying the Lenmar DLC5L Lithium-ion Digital Camera/Camcorder Battery Equivalent to the Canon NB-5L Battery (it's a 1100 mAh battery that is 1/4 the price of the Canon stock battery) as a cheap spare, just to have until my Canon battery can get recharged. I've read the many reviews -- they are all over the map. My question is: besides the battery possibly (or likely, according to some reviewers) crapping out, could this battery in any way do any harm to my 790? That would be a dealbreaker. I'm willing to take a risk that it will be a sub-optimal item, or even a dud, but I don't want to hurt my precious. ;) « Show Less
[ "Sure.One other consideration: my Canon batteries have lasted for years with only a minor loss of capacity, the Sterlingteks I own lost a moderate amount of capacity after two years but are still useful and the other 3rd party batteries both dropped stone cold dead days after the one year warranty period expired.", "Thanks for the rundown and for the tip. SterlingTek SterlingTek's POWWER brand Canon Powershot SD790 NB-5L battery 1400mAH would be the way to go, but I'm penny-pinching, and 14. + 8. (shipping) for the SterlingTek is 12. more than the Lenmar, so I think I'll have to spin the wheel and hope I receive a non-dud from them. SterlingTek make a sweet little car charger for that battery also (15. + 8.) that would be very handy, but now we're talking fantasy purchases. I shouldn't be shopping, I should be digging myself out of debt." ]
What does II stand for?
[ "Frankly, after biting the bullet and ordering I can't understand the concerns people had in their reviews. The serious in-depth reviews were the ones I paid attention to. Most of the negative reviews really didn't understand what they had. Perhaps the earlier models had a tacky exterior but you couldn't prove it by me. Remember, this is a Canon product. I have learned by owning and using some of their other products you can count on their quality. Try it; you will be astounded . . . and the price is right at Amazon Prime." ]
Does it have thestandard 5/16 attchment fitting
[ "The polisher has a counterbalance bearing hub with female 1/2\" D thread. Backing plate has 1/2\" stud." ]
can I purchase the dustbag only
[ "The quickest(?) way to obtain a replacement is to find a local service center for B & D. Make it easy; take the sander with you to the store. If they can't help, call/email the company, with the model number/part number of the needed item. Option 3 might be eBay. I have seen stuff on eBay that I never expected--especially parts. Option 4: make your own. Save the neck. and the stiffening rod, of the old one and fasten a new bag to it. If you machine sew, so much the better. Pick material that won't let dust seep through it while running. You can vary the size--forget the zipper they usually jam after a few uses--empty it through the neck. Good luck. PS: Keep the cost in mind. It might not be worth it to buy." ]
Does it support skype? Does it come preinstalled? And if not, how do I get the app?
[ "there is a skype app on the play store, it works well, but you need to speak clearly and directly at the microphone", "it will take Skype and you will have to go to the play store to get the app. I put it in my self and have not used it, so I uninstall it" ]
what are the complete ingredients?
[ "Sorry, I don't have any of the containers anymore ... doesn't it say on the site? If not, call the company that makes it. That's what I did to make sure it was safe to give my dog and what the dosage should be.", "Just what's listed. If you are taking a multivitamin with Magnesium, watch your intake. Taking up to 12 caps a day is safe if you are not filling up with foods and/or multivitamins that would exceed the RDA. Look up the RDA for yourself of the vitamins and minerals. Then add the amount listed for the caps on the IP6 bottle. Also, foods that are high in these minerals will give you what you need, so do not exceed the RDA, unless you are advised by a professional. Reduce the caps so that you do not exceed limitations." ]
How much weight does it support?
[ "Actual weight handling I do hot know. But make sure you have long enough screws and and large enough to be secured into framework. I weigh 300Lbs and have have not had a problem with mine.", "I am not sure of the actual weight limit but I struggle going up and down steps and have two of these installed on my RV. I pull on them quite a bit going up the steps and they are sturdy and show no movement where attached.", "I am really not sure about the weight support, but when I purchased it I think it was rated at 250 lbs. I have mine attached beside my back door for my parents use when they visit. It seems very sturdy and I am pleased with it. My dad's weight is apx. 225 and he has no problem with it.", "I have it installed in my house going into the family room which is two steps down. We use it when we haveelderly people over for gatherings. It works very well and is quite sturdy. I would say anyone under 300 poundswould find it quite suitable. I used 3\" screws to anchor it thru the trim board and into the studs." ]
Do LED lights have a Guide number? I have heard that don't expect the light to go further than 6 feet.
[ "The short answer is yes. They're designed for closeup & macro work so, they don't need to put out a lot of light. Most of my closeup work is under 3 feet. It should work automatically via your cameras TTL flash system." ]
is this a real gas mask or costume
[ "this mask is primarily used for costume even though the base of the mask in general is that of a repirator. I would not suggest using this as anything but a cosplay mask.", "Its a costume respirator, but you can still breathe through it. I wouldn't suggest using it like you would a legit respirator though..", "Itz an cyberpunk accessory.. Dont try to go storming into any buildings on fire with this one." ]
Can this synthetic r134a be mixed with older r134a or does the system have to be evacuated first?
[ "I did not evacuate, worked well for short time, had system leak, therefore I can not give a positive answer for effective long use of this product.", "DON'T USE THIS STUFF!!! The leak sealer aspect of it is basically an epoxy-like substance that hardens when exposed to air. Sure it seals pinhole leaks (which is why it seems to work in the short term), but that same property means that it also clogs small orifices (Orifice Tubes (OT) and Thermal eXpansion Valves (TXV) )that are crucial to the operation of the a/c. Furthermore, when the system is later opened up to replace these clogged components, the rest of the leak sealer hardens in the lines, evaporator(s), condenser, etc. At that point, the only solution is complete system replacement (new compressor, condenser, evaporator, lines, etc) because you can't flush it out once it's hardened. I could live with it if the product just didn't work. But the fact that it takes out your ENTIRE a/c system makes it SO SO dangerous! Don't destroy your A/C!! STAY AWAY FROM THIS PRODUCT! Flame away - I'm not looking for business, I just hate to see folks destroy their a/c system on an empty promise of a magic bullet fix. Lest you think I have a beef with this company in particular....stay away from ANY similar products that contains anything designed to \"stop leaks\". Your engine cooling system may be tolerant of such products, but A/C systems are NOT.", "Before i use ac pro my truck ac has differrent brand r134 ( cheap from autozone)I just added AC pro professional.. Make sure you do not overfill.. I did not evacuatethe ac system.. 2 years now so far so good." ]
I have a Trek Shift 4, would that be a E or V ?
[ "It depends on the size of your bike frame. Coming from the Topeak website, the A-type is for XS to small frames, the E-type is for small to medium frames, and the V-type is for medium to large frames." ]
What country are these made in? I can't seem to find that information on Amazon. Thanks!
[ "If you want American made stainless steel straws buy some from Maine Drinking Straw Company. I just ordered some. Pricey but you get what you pay for. Locally made, so better for the environment in that respect too. Small business owner also. Not available on Amazon, have to buy directly from Maine Drinking Straw's website.", "RSVP Endurance is based out of Seattle. However, I have only been able to find that they are a \"supplier\". I will be getting these straws soon and will let you know what I find out.", "If it doesn't say, I would assume China, and, if it is China, run away and keep your money and health intact." ]
how many contacts will it hold? What is the phonebook capacity? Thanks, Bob
[ "I have about 80-100 contacts i don't know whats the max.but it's a good phone." ]
will this work on a ASUS M4A79XTD EVO Motherboard ? it's a AM3 if that helps
[ "Yes the Phenom II 840 is supported by this motherboard if you update the BIOS version to the latest 2102 version before you install the new CPU .. We carry this model in stock and many more that are compatible with your motherboard .. Thanks for the question.. M&D Discounts Store front is here" ]
I've bought rollerblades and they do not support my ankles and I feel very wobbly. How are these for ankle support?
[ "These have nice ankle support. I am an active person, so I'm not sure if having more developed leg muscles is the reason for feeling stable butt, all in all, you feel secure while blading.", "It's definitely something you'll have to build up. Also, with softer wheels, such as the ones that come standard on these, it'll be more difficult on asphalt or uneven surfaces. If you have any bike paths, I would suggest starting out there to build up your ankle muscles. I noticed my legs bowing at first so I would say these have lower support than some other brands. Hope that helps!" ]
What numerical sizes do "small" "medium" etc refer to?
[ "I do not recall. But you can get your answer on Shock Doctor's web page. Just look up the item and there is a size chart.", "this info is from the shock doctor's website: Ankle Size (in.) S 8-8.5 M 8.5-9 L 9-9.5 XL 9.5-10 Measure ankle circumference 1\" above center of ankle bone tip", "this info is from the shock doctor's website:Ankle Size (in.)S 8-8.5M 8.5-9L 9-9.5XL 9.5-10Measure ankle circumference 1\" above center of ankle bone tip" ]
I'm building a .300AAC Blackout 16" carbine and would assume that this would work fine. Am I correct?
[ "There is no problem with ANY stock attached to an AR lower . Buffer tube and spring is compatible with 300 .", "This stock, recoil spring and plug worked for my simple .223/5.56 build but for your application Would highly recommend that you check the recoil spring tension specification for your .300 AAC build with the manufacturer of your upper receiver. Good luck with your build." ]
I see it comes with screws, and assume the "adapter" is the ac power adapter, but don't see mention of a bracket for mounting to wall/ceiling?
[ "It does come with a wall mount bracket, screws, power supply, antenna and instructions. We bought 2. We love them. We downloaded an app on our phone and can move it around and even use the speaker and microphone through our phone. It's great ! Hope this Helps.", "yes, it comes with a plastic bracket that screws into the base of the camera (with a normal screw that you'd find on a tripod to connect a camera) and then that screws into the wall. It's adjustable to support horizontal or vertical installation (so on the ceiling or on the wall or really anywhere in-between from 0-90 degrees). it's not the most-elegant looking thing, as it's smaller than the base of the device, but it is completely functional.", "Yes it has a pretty good bracket that can mount the camera to a wall. You could use it to mount to a celling if the software you are using allows you to rotate the image. It screws into the bottom of the camera so if you want to use it as a stand it will add about 1-2 inches to the height." ]
Can you order it with a smaller waist strap to fit smaller waists?
[ "Can advise how short do you want the strap to become? This can be done easily by pulling out the end of strap and cut the excess portion, then resew it to make a \"stopper\". If you need one piece then you can do it with a home styled sewing machine. If you need volume quantity, then we can make them from our factory, but it takes several months for delivery......Thanks.", "sorry we don't make smaller strap to fit smaller waists but what you can do is to cut the end of one side of the strap and re-sew it back." ]
I need only the aluminum tubing and bolts at either end as this is the only portion of that assembly that broke. Do they come seperate or not. It was majorly hard to disassemble but finally got just that portion undone. I need only the aluminum tubing and bolts at either end as this is the only portion of that assembly that broke. Do they come seperate or not. It was majorly hard to disassemble but finally... » Read More I need only the aluminum tubing and bolts at either end as this is the only portion of that assembly that broke. Do they come seperate or not. It was majorly hard to disassemble but finally got just that portion undone. « Show Less
[ "gas line to the pilot comes off. but the other line no.. its best to replace the whole thing. if its rusty and you you cant get it off you may have to make a new bracket to hold it." ]
can it fit a kj works kp-05 Hi cap?
[ "I'm not sure because I bought the wrong mag for the gun. Sorry not more helpful!", "No. KP-05 is made by KJW, which uses entirely different systems, and is based on an entirely different kind of gun. This is intended for KWA/KSC Berettas, the KP-05 will accept KJW and Tokyo Marui Hi-CAPA 1911 style magazines. Don't use MEU/Government 1911 magazines, or Hi-CAPA 1911 magazines made by any company other than Tokyo Marui or KJW." ]
Does this PSU come with a grounded power cord (from the wall outlet to the back of the PC)?
[ "Yes. Have had it several months and it works great. You won't be disappointed" ]
How many sets of cleaning solution is included in each package?
[ "Hello, Thank you for your inquiry! This is a set of seven pairs. Please ask anything if you need. We can send it out immediately. We will make my best to improve service you. Thank you!!" ]
Hello Deal Leader, I was wondering why you can only ship to within the US? I am a long-time Amazon user and unforunately I live in Japan.
[ "Hi : Thank you for your interested, but due to the agreement with google, we could only sell this item in us, if you have a friend who live in us , you may could ship this item to him/ her, and ask him to ship to you. I am sorry for any inconvenience. Have a nice day!" ]
What are the dimensions?? Are there a cutout for filter.
[ "yes - cutout for filter. Aqueon is the brand name. tough plastic is not brittle. fits my 10 gal all glass aquarium perfectly.", "not sure on the dimensions..it fits on my 10 gallon aquarium..and there are places for the filter..its scored but you have to cut them out yourself....that was a pain", "It will fit any ten gallon fish tank I had it now for three years an it us still looking life it is still new" ]
I want this to listen to recorded book tapes when I walk. Will this work for that? Will it hold up to movement from active walking?
[ "This will work with standard recorded tapes. It might be a bit large for active walking." ]
OK for cutting wallpaper?
[ "I would say yes, given what the blade is and the ease of use of the handle, but I can't say that from experience. (I mostly use it for cutting tape on shipping packages, as well as the cardboard itself.)" ]
How does this product relieve tension in the jaw?
[ "I can't say it relieves jaw tension. Only that when my neck feels less tense, my face can also relax. I have not had any jaw tension problems since starting to use this product on a regular basis.", "Not directly. It gives a really good stretch to my neck which helps relax my jaw...crazy answer, but the best I can do." ]
I have a big head, how roomy are these at the temples?
[ "These fit like a normal/standard pair of glasses. They \"wrap around\" and are form-fitting around the eyes, so they are a little snug at the temples." ]
Which xenith helment should I buy for my son, the youth model or the varsity model? What is the difference?
[ "Youth halmets are for kids prior to high school, as for varsity are for kids in high school football level or hogher", "The difference is obviously in the size of the helmet but also since their are shock absorbers in the helmet they take into account the weight levels of the kids. They younger the kid, they usually weigh less so the collisions have less force so the shock absorbers don't need to be so beefy. The varsity helmet is for high school aged kids so the collisions are greater so the shock absorbers are better suited to harder hits. You should look at the xenith website and watch the videos if you haven't already. Great helmet just get the right on for your kid", "My 12 year old son uses the X2 youth medium and it fits great. He has been using it for almost a year now. Xenith has a guide on how to properly measure for your child so you can het the best fit", "My son has a small head so I had to get the youth. if he can fit the adult I would get the adult. Not sure there is much difference." ]
Will the queen size headboard be secure enough with it at the highest height & being held by one nut & bot set on each side?
[ "We have ours at the highest height- the headboard does not touch the floor and it IS a little wobbly. It's in a guest room that doesn't get used too much but we liked the quality of the wood and it matched our other furniture so we just live with it. I would not want someone to lean hard against it too much." ]
From the picture, it doesn't look like the handle folds closed - is that correct?
[ "The handle is actually a separate piece that is V shaped with a hole at the top. That hole slips over the mirror handle and slides up and down so you can adjust the angle for viewing. The handle is made of fairly brittle plastic and is definitely the weaker part of this set. I like the magnification of the mirror section and that part is quite sturdy.", "The handle is removable, so the mirror can lie flat or be hand held. It is great for traveling.", "You are right, it doesn't fold closed. However, the handle slides off so you can store or pack them flat. Hope that helps.", "The handle doesn't fold. There's a gadget for making it stand up at the angle shown. I typically use it hand-held." ]
Will they work with a leapfrog leap pad 2?
[ "Hi Erinn Campbell, This headphones supports 3.5mm jack. Please check your leap pad2 if it supports the same connection. Thanks. >Joffrey" ]
How do I work them ?
[ "Sorry I misread your question. They mount on the side of the Total Gym and you work them using only your arms moving the gild board up and down the rails." ]
How's the sound quality on these models? While I'm at it, how well does it handle composite input?
[ "Yeah that seems to be the deal with the new ultra thin 40\" Samsung LEDs. My friend bought one from Best Buy and the sound was so tinny that a sound strip with woofer had to be used or the TV was like a radio compared to a Sony Bravia 40\". The only problem with this is you need to turn up the volumn to a mid-high level to notice any difference in the sound. Don't need to have my TV that loud and the speakers in my Sony are just fine for my living room. Why spend extra for a speaker system when you can just buy a Sony and have quality sound from the internal speakers??" ]
Are all of the fabric pieces of this removable and washable or just the insert?
[ "The whole thing (all fabric) comes off leaving only two fabric straps which aren't removable. All of the inserts, bedding can be thrown in the washing machine. Washes up nicely. I've done it several times. Once you strip fabric, you're left with the plastic and metal frame and two fabric straps. Sorry forgot, the very top headpiece doesn't remove I don't believe but that really shouldn't ever get dirty since the baby isn't touching that ever." ]
why is that massager very loud when it is operated ?
[ "it isn't loud when first used, but as it is used a lot, and gets older, the vibration separates the two sides and they become noisy. The one I bought in 2005 has just become noisy. Because of the pain in my shoulder, back, neck, etc, I use it a lot. For this kind of money, replacing them every few years.....good deal.", "I don't know why it's loud. It doesn't seem loud to me. I use it while watching TV.", "The main part of the massager is made of hard plastic and the inside knob under the white part is also hard plastic and when turned on, the two peices of hard plastic are hitting each other causing a loud noise. You can hold the massager in one spot with some pressure and it will stop making the noise but after a few second of firm holding, your hand begins to get sore. Overall if you were using it on your foot, you can tolerate the noise but if you use it on your shoulders or neck (anything close to your ear) its a bit too much.", "doesn't seem that loud to me but then again when it is in operation i have have my ALD out of my ears", "I can't say with certainity just why this vibrator became so loud. Apparently it has either an internal broken component or possibly a malfunctioning armature motor. At any rate, because of the excess noise, it has been tossed into a closet to await shipment back to the manufacturer after only a few weeks of use." ]
This charchoal floats, unlike my other charcoal from Japan? Is this a problem?
[ "I think that there is no problem It is different material, size, by process, Our Binchotan is produced in Vietnam with the Japanese technique to provide best quality." ]
What kind of material is this?
[ "It's made of...Body/steel Top plate / fluorine coat plate Gotoku/ heat resistant aluminum die casting Burner/heat resistant aluminum die casting Appliance valve knob/ ABS resin" ]