query
stringlengths 20
2.05k
| pos
list |
|---|---|
Are the SSD and HDD parts of the drive partitioned into C: and D:? If so, how does restore restoring from an unpartitioned Windows system work?
|
[
"They are not separate partitions. My best advice is to keep a backup on a separate drive, such as an external hard drive.",
"They are indistinguishable to the computer, the drive appears as one disk. It uses the SSD at-will, and you have no control over it.",
"This HHD is super cool, the speed, and i have mine partitioned and works perfect, till know , no problems",
"No, It is a single drive and has a single parition. The drive is simply a hybrid method (SSD/HDD) of storing memory.",
"In my system the drive is not split into SSD and non-SSD. It operates as one drive, just one with wicked fast speed. I have not had to work with restoring Windows yet so I can't answer your second question. I will tell you almost 30 days into having it that I love it. It was a great purchase, and one I would buy again!",
"No. As a matter of fact, if you buy it new, you will have to partition it just as you would a \"normal\" HDD. All operations, including your restore function, work as they normally would. The thing to watch with this drive is when you defrag. Only do it once a month or so, because the drive's caching function works in real time. So, if you defrag, it tries to cache everything as it goes, and you lose your speed benefits, at least for a little while.",
"No, the solid state portion of the drive engages in transparent caching. The Mac/PC is never even alerted to the existence of the solid state portion. You cannot access the SSD part of the drive, or mount it any any way. Also, the SSD section has nothing to do with fragmentation - you should defrag the drive when defragmentation is high, the SSD will readjust automatically to any changes in your most frequently-accessed files/sectors.",
"Hello Matthew, I unfortunatelly cannot answer your question because I am using this drive in a Mac. The system is completely different and has been implemented to use this drive. At the mac I get 6GB put through and the system itself manages the SSD part of the drive. I have no idea if or how Windows will take advantage of it. Sorry."
] |
has the problem of sharp edges in the crate been corrected?
|
[
"NO IT HAS NOT!!! Look at the pictures i have posted a picture of mine with sharp pointy spikes because of poor workmanship and quality control.",
"Second crate was better. Not perfect. But no sharp edges. A couple of bent pieces but husband was able to bend back.",
"Not sure which 'sharp edges' you're referring to, so I suppose it has been fixed as I haven't come across any sharp edges. :)",
"I bought this crate about 2 months ago, today is 7/4/13 I was not aware of sharp edges in the crate nor have I seen any in mine. Hope this helps.",
"I bought mine about 3 months ago for a Golden Retriever puppy and don't see a problem. The only thing on the cage that appears \"sharp\" at all might be the little 1/2\" metal connectors that connect the sides together. They are positioned along the outside edges and don't appear to be a problem.",
"I bought one of these 2 years ago and have never noticed any sharp edges. Just bought another one today, so we'll see how that one is on Wednesday."
] |
Will this product work as floorboards on my boat ?. Also how much does 4 by 8 sheet weigh ?.
|
[
"I don't have the specifics to answer your question....but maybe this will help. In order for HDPE or HDPP to be a floorboard, I would estimate it would have to be at least 1/2\" thick and supported about every foot. It would be heavier than plywood. Also, when wet is is very slick. A 4X8foot chunk would be quite expensive and even more than marine plywood. I would suggest you buy marine grade plywood as it is not subject to rot like regular plywood. Marine plywood is designed to be in wet and high humidity areas, as all layers are glued with water-proof glues. Home Depot in some areas carries it at less than $100 a sheet. Some locations may even stock the 5X8 foot sheets. Chances are your boat has a transom that is made out of marine plywood. Most fiberglass boats have marine plywood built in the transom. My aluminum boat does. Here is a site that explains marine graded plywood. http://www.apawood.org/level_b.cfm?content=srv_help_prd_marine There is no good adhesive for HDPE that actually makes a good bond. Some have had some success with sanding to roughen the surface, washing with acetone, completely drying and then fire treating before applying adhesive. Something an individual can not possibly do properly. I hope this helps."
] |
I lost my set of screw bits. Would someone let me know what I can buy to replace them? I don't know if the double-ended screw bit would work. Thanks
|
[
"Any standard screwdriver bit will work. You can buy them almost anywhere. Double ended bit did not work when I tried one. There isn't enough of a collar on the bit for the driver's nose to hold onto securely.",
"The screw bits seem interchangeable with those I have from other sets. Even the double ended ones.",
"Any cordless drill bits will work in this screwdriver along with screwdriver bits that are made for other brands.",
"Home Depot carries ones that will fit this driver. Take it with you if you are unsure. Universal fit, you can get them most any where."
] |
Will this charge a Kindle Fire HD 7"?
|
[
"I don't know but I assume so, as long as you have the correct USB to Kindle cable. I am able to charge my full size iPad."
] |
Are these organic? Where are they grown?
|
[
"Very worry-some packaging. No product information. Poor appearance. However, I have used in baking when the recipe calls for dates and so far so good.",
"I don't believe these dates were organic. I do not know where these dates were grown although many of the dates grown in the US come from California."
] |
Can I stiil use the finger print
|
[
"I'm sorry, but I don't understand this question. However, I can use all my buttons on my phone with this cover....and I love it...get lots of compliments!",
"Excuse my ignorance. I don't understand the question. Can you be more specific?"
] |
Does anyone else remote work very poorly? Even when I am in direct sight and 3 feet away it does not respond 75% of the time.
|
[
"Mine works fine, I just have to make sure that I point it at the right angle. Double check bateries in remote and clean receiver on remote, if your still finding difficulties contact the seller."
] |
It's fit for samsung s7580 and s7560?
|
[
"yeah but I have a samsung duos . as they advertised . anyway i gave it away no use",
"Yes it did perfectly its a bit difficult to answe a call cause case needs to be folded weirdly."
] |
will it work for my canon rebel t3?
|
[
"I don't know for sure. I shoot Nikon, and have always used Nikon so I can't say for sure if it will work. What I can tell you is if you don't use it with a lens that has a large enough max aperture (at least F4) the auto focus won't work because there is not enough light. Sorry I can't help you more than that"
] |
what is the btu ratting, 9k???
|
[
"I absolutely love the burner. It serves many purposes, especially when you are just making a pot of soup. No electricity or gas fees involved. It wll save you so money.",
"Usually the BTU rating refers to the \"heat\" that a stove or similar heating device is capable of producing. As Rudy stated, there is an input rating of 7650 BTU per hour. However, this is NOT a heater. It is a cooking appliance. It uses butane which cooks \"hotter\" than propane.",
"Sorry, I don't know the official BTU rating of this butane burner I bought from Amazon..I do know that above 32F temp it works fine and will make bacon or sausage dance in the skillet in just a couple minutes...Below freezing ambient temps the butane will not get up to cooking temp and may not even flow thru the burner..So if you are a winter hiker or cooker you need to consider a fuel blend or a straight propane unit...I don't camp anymore so my use is backyard cooking which the butane unit does a great fast job..Nuff said!!!!!!!!",
"I used this for a 9 day camping trip. I made coffee everymorning, and several meals. Its small and doesnt take up much room. My only regret is not getting it years ago!!!!!!!!! LOVE IT!! 10!",
"I have a packing insert that states...input rating...7,650 Btu/Hr-Max, 6,921 Btu/Hr-MinI hope this is the info you are looking for.",
"I have a packing insert that states...input rating...7,650 Btu/Hr-Max, 6,921 Btu/Hr-Min I hope this is the info you are looking for."
] |
what is the dimension of these pads,, the useable part
|
[
"The total dimensions are 23\" x 36\". Subtract 3\" border or margin from the length, and 1 1/2\" from the width, and you have the quilted, absorbent useable part.",
"I purchased the 25 pads/regular size. I just measured the pads. Their total size is 16.5\" wide X 22.5\" long. The blue quilted layered center is 15.5\" wide X 21\" long."
] |
Can I use this pad on top of a custom orthotic? If not, is there another product you can recommend?
|
[
"Yes, I think you could. I think it is easier to position onto an orthotic outside the shoe. I believe the adhesive would stick to about anything.",
"The Lynco L405 Orthotics by Aetrex are inserts with a built-in metatarsal pad. I use these in my New Balance sneakers (I remove the insoles that come with the shoes and replace them with the Lynco Orthotics). I have used these for years and like them because the metatarsal pad is already correctly positioned. However, they are too bulky for a ladies flat or dress shoe, so I use the Pedag Metatarsal pad for my flats. I've never had a custom orthotic so I wouldn't know about adding to it.",
"I'd be careful about using the Pedag Drop Metatarsal pad on top of another orthotic because it changes the pressure points on your foot as you walk. You may want to consult your orthopedist or podiatrist on that one."
] |
What is the difference between this Urinary Tract Formula and the Pro Plan Urinary Tract Formula?
|
[
"Sorry for the confusion. I meant to type: PURINA ONE Urinary Tract Formula and the PURINA PRO PLAN Urinary Tract Formula. Here is the link for you to see the PRO PLAN Urinary Tract Formula:"
] |
Do I still get an iFixit warranty if I buy from Amazon?
|
[
"I didn't even know that they had warranties. I look forward to an answer to that as well",
"Don't know - go here to find out: http://www.ifixit.com/Wiki/The_iFixit_Warranty",
"I would say yes they just use amazon as sell sight it's not like amazon buys them then resells them.",
"Don't know, I've been using it for awhile and it's holding up good. Plastic scribes & pry bars are consumable by nature. The driver and the Phillips #2 get used daily with no problems, good metal.",
"Any iFixit tool is covered by their warranty, regardless of the place of purchase. Send an email over to support@ifixit.com, and they'll set you straight with whatever you need."
] |
Hello, How tall is it top to bottom with and without fringe?
|
[
"If measuring from the top of dome to bottom edge approx 10 inches. The fringe is then 6 inches longer. I am using it on a 5 ft floor lamp circa 1920s and I think it looks fabulous. Hope this helps. I would send a pic if I could.",
"It's about 10 inches plus 6 inches of fringe for a total of about 16inches."
] |
Is the image mirrored? My HU mirrors the image, so if the camera does it too, it will be unmirrored. Thanks!
|
[
"I mounted mine upside down , and the image appears correct on my screen. Hope this helps",
"I am not sure which way of the image is looked as mirrored. Mine looks straight to me. I mounted mine upside down, which means cable is on the top and camera is on the bottom. To be more specific, I see driver side of my car on the left-hand side of the screen. Hopefully, this will help you out."
] |
Do you need a drivers permet ?
|
[
"This is considered an electric bike and complies with the federal electric bike law H.R. 727. You should not need a license/permit but you may want to check with your local law enforcement."
] |
I want to buy this, but my drawer is only 3" deep. Will my large knives sit too high?
|
[
"Remeasure from the inside \"bottom of the drawer to the top of the drawer opening.\" Mine is 3.5 inches. The Bamboo knife storage tray and the knives all fit nicely. I posted a picture.",
"The sharp side of the blade sits on the drawer itself. The block does not elevate it. The blade would need to be less than the 3 inch deep drawer. I really like this block.",
"Measure the height of your largest chef's knife, mine is 21/2 inches. Add about 3/4 inch (that's the height that the storage unit hold that part of the knife. If that is more than the clearance for your drawer, you can't put that knife in there.",
"My drawer, with this knife storage, is technically a 3\", actually inside only measures 2 5/8\" and everything fits fine, even my large Wustoff chef's knife. I'v had it for a little over a year now and I love it! Much better for me than the block that sat on the counter.",
"My tallest knife is exactly 3\" high so this might not work for you. Check out the options at The Container Store. I think I saw a selection of knife holders for drawers there. Good luck.",
"It will be tight, but I think it will work: the large knives are on the bottom of the rack."
] |
Does this work for laser mouse?
|
[
"Yup, I'm using it for a laser mouse since the mouse wasn't getting a good read on my desk."
] |
What is the bed size when open?
|
[
"The futon pad is 2 inches wider and 8 inches shorter than a twin. So twin sheets are fine. I bought sheets with deeper sides to make up for the 2 inches it needed in width.",
"I don't have access to the futon, but I can say that it is smaller then a double bed, closer to a twin bed. Not big enough for 2 people.",
"I found that I can use an XL twin sheet on the futon. I think the other responses are more exact. I would agree that it is not large enough for 2 people to sleep comfortably. I have also slept comfortably on the futon without folding it out.",
"When open:length - few inches shorter than a twin XLwidth - just slightly wider than a twin XL"
] |
will it work with the 4 as well as the 4s?
|
[
"My daughter has a 4S but as long as phone were same size I would assume it would fit."
] |
What diameter hole is needed to dash mount this?
|
[
"I cannot recall but the back part slides in from the front and a clip is bolted into the rear to hold it in.",
"I used the one made for a previous gauge. Think it should be 2 and 1/8 inch diameter. Suggest you contact Moeller to get specifics. I used the Moeller gauge which was compatible with the tank."
] |
Does the Makita BJR182z here come with any blades or not? If so how many & types?
|
[
"Unfortunately the saw does not come with blades. But there is a listing on Amazon for a Makita blade package containing different types that I have used in the past. I find that name brand blades last longer than the cheap ones that can be had from say Harbour freight. I would also recommend the saw it cuts well and lasts a good while on the 18v battery. Hope this helps."
] |
what color did you have the letters?
|
[
"Hi Joan! Here are the towel and fabric options we offer. After placing an order you will receive an email from Adorable Studio or feel free to contact us directly if we can help further! 1. Towel color Blue, Red, Apple Green, Pink, Raspberry, Orange, Purple, Plum,Yellow, Gray, Chocolate, Teal, White 2. Fabric choice for the name Blue chevron, polka dot or gingham check Red polka dot or check Apple green chevron, polka dot or gingham check Pink chevron, polka dot or gingham check Purple chevron, polka dot, gingham check Yellow chevron, polka dot or gingham check Gray chevron, polka dot or check Chocolate chevron, or check Teal chevron, polka dot or gingham check Rainbow chevron or polka dot Black chevron, polka dot, check or houndstooth check"
] |
does this item virbrate/
|
[
"Hello, Yes this Item does vibrate.The description is AFRO AMERICAN WHOPPER-8\"VIBRATING W/ BALLS BROWNFlexible pigmented realistic flesh/chocolate erectionPerfect for anal or vaginal satisfactionDual packaged for male or female customers3 AA batteries (not included)Please let us know if we can help further. Kindest Regards, Stars Toys",
"Yes, the dildo plugs right into a multi-speed controller. 3 AA batteries, not included."
] |
Can these record content for viewing later? If so how long of a recording will it be?
|
[
"No, you can't. Is just a stand alone camera. (you can view the live stream using your computer/mobile device)",
"These are simply cameras with a motorized mount so you can control them remotely. They do not have any onboard video storage. If you wish to record some video to be viewed later you will need a separate piece of software to record and save the video feed from these cameras onto your pc or mac's hard drive.",
"Foscam firmware can usually write to an FTP server. This isn't as advanced as it sounds, and you could use a raspberry pi or something as the FTP server. It can take a single picture per second.Another thing you can do is use software like VLC which is a video player. You can right click the foscam's video feed in your web browser and click \"Copy image address\", then open VLC and press CTRL+V (to paste) and VLC will open the stream. More advanced users could figure out how to save a compressed video file from these two hints.Hope this helps other people!"
] |
Would be able to use Netflix/Pandora on 7200?
|
[
"not sure what you are asking here. if you mean could you use a streaming box from those services or a HTPC, jack it into the reciever and be golden, then 100% yes does it hook into the internet and stream those services itself, then no"
] |
how do you wash these?
|
[
"In the washing machine in cold water with the rest of my clothes. I put them in the dryer with the same load. No problems."
] |
will this fit a 95 softail with mikuni carb? I know I would need to buy the carb adaper concern is the head breathers not working due to the adapter
|
[
"the head breathers will work just fine with the adapter as long as you use the oem breather bolts. you may have to use spacers behind or in front of the mounting bracket,and I had one of these air bcleaner kits on my softail with mikuni carb. worked great and looked great."
] |
Is this a permanent product, meaning can I coat bare metal to protect it outside for 20 years?
|
[
"It is not permanent it holds up well though on the bumper of my truck though...",
"I'd say it is semi-permanent. Meaning as long as you prep the metal with a primer to stop rust ,it should last a long time. Caveat...until someone starts to peel it off. Then it will come off quite easily. I'd use a good quality paint instead.",
"I applied it to the steel bumpers on my truck and no it's not meant to be permanent. You can peal it off at anytime. It has lasted some time on my truck and has not shown any signs of chipping but I also put 4 or 5 coats on it.",
"No, it will start to pull up over time do to fluctuation in temp, and humidity. For long term protection you may want to use a bed liner or original ( non spray able) plasti dip. It's thicker.",
"I coated my truck now don't know about 20 yrs but know that it will last as long as no scratches or tears . I used roll on bed liner and then coated it . It's. Different",
"20 years, imnot too sure. I do know that I left a motorcycle outside in florida while I was in Afghanistan for a year and it was coated. when I came back the parts that were exposed were rusted and the chrome that was coated was brand new. if that helps."
] |
Does this fit the R class
|
[
"I don't know, all I know is it did nothing for my glk 350..it is not at all what I expected...I would give you this one..if you wanted it.. I have no use for it..i folded it back up and just have it ..not using it...maybe it would do something for you."
] |
My cat has destroyed the 23" scratching post. Is there replacement parts ? I would hate to have to buy another house because of that one post.
|
[
"I don't have the instructions any more, but I seem to recall you can order them. Try googling the Amarkat company. Beyond that, I don't know."
] |
how does the blue color one hold up against getting dirty looking
|
[
"My husband has been using the blue one for a year, and it still looks great!",
"Yes, the blue held up really well. I was backpacking for three months shoving the back under bunkbeds at hostels and you could hardly see any marks. The grey reenforcement at the corners showed a little ware after coming off the luggage hold on the plane. I really liked this bag and the versatility it offers."
] |
Do I need a conversion kit?
|
[
"It's not needed any other parts or asccessories. The driver is included in the package. Thanks",
"I don't think so they should be plug and play but I had to dremel some material of the 3 little ears because they wouldent fit in when I twisted them but other then that they work fine I got them for my 2011 maxima"
] |
Has anyone noticed a flash behind the rocker switches when turned on or off or when the heat setting rocker switch is switched between heat settings?
|
[
"Yes, I've seen this. I had mine for 14 years, and I noticed this as well, but it didn't seem to interfere with the usage (or, more importantly, electrocute me)",
"I've had no issues with mine. It's the 2nd one I've had. Other lasted 6 years. If you notice this - I would send it back and ask for a new one. I am sure they will exchange it. Hope this helps!"
] |
I had a Canon EOS Rebel XT w/ 70-300mm & EFs 18-55mm lens's, will these len's fit on this camera??
|
[
"I believe so, because my husband has the XT and i have the t3, and we can use the same lenses. We actually have at times when he's brought a lens with him that I forgot.",
"i'm not sure the lens that came w/ mine were canon zoom lens EF 75-300 mm and EFs 18-55mm.. I would think that they would but I can't be sure.. this is the first cannon i've owned.. I switched from Olympus."
] |
I love the way the chair looks. However, it also looks awkward to get into and out of. How easy to you find it to sit down and get up?
|
[
"Super comfy chairs! Tip down to sit. Not difficult to get in and out, but a little trickier than sitting on a regular chaise. Once sitting, it is like floating.",
"It IS awkward to get in and out of the chair, but very comfortable after you are in it. I found the best way to sit down is to put a foot on either side and then sit backwards; when getting out, get both feet planted on either side and then raise up. Not bad once you get the hang of it.",
"Actually I had to get the hang of it!! I have found if you put the foot of the chair down on the ground then you can just sit in. then get out the same way. it is so comfortable it's worth the 'awkwardness'!! I love the chair."
] |
Will this fit in a Satin Smooth single warmer?
|
[
"you have to shove it in. it's just a little bit too big, which is frustrating.",
"Yes it will pop over the top a little, but it will still fit and warm the same way. Just won't be able to close the top.",
"I think it will. I have a small GIGI warmer & it fits in it. I too had that concern when I bought it."
] |
What size for baby desert eagle 40
|
[
"I have to think that would be like a 2 3 or 4 for a pocket gun they have the info on the uncle mikes website",
"Their website has a chart with numbers that fit different sized guns. Look for your gun or one of similar size. Or call their help line number.",
"Uncle Mike's website has a chart and also a number to call if you still have questions."
] |
Does anyone have a picture of what this case looks like on a pebble blue SG SIII?
|
[
"I don't have a picture to show you, but my husband has that color phone. This case completely covers the blue. In short, you will now have a white phone."
] |
I ordered the parts and they are the identical and it looks like there is a left and right from. Are they identical right down to the "R" on it?
|
[
"said on February 13, 2015 | Edit Yes they are a left an a right there is a text in the hard to locate an see but they are there. I cant remember where an I dont whant to take apart the ones I have. keep looking you will find the text info.",
"I dont remember.......but they went on simply and the thing does not walk around backwards! So i cant see where it matters unless you are going to resell them."
] |
This may sound stupid... but what does it mean by "Ct"? eg 30 Ct. does that mean 30 whole blades or 15 blades snapped in half = 30
|
[
"It means there are 10 in each box for a total of 30. One double edged razor countas as one - so ten in one box. They're great and last forever!",
"It's 3 packs of 10 double-edge blades each. They are meant to be used with a DE razor, not snapped in half."
] |
I would like to know the max width, height and thickness.
|
[
"Width is 36\", Height is approxi 12-14\" and Thickness is approx. 4'. One side has a stationary side panel that you slide on to one end, the other end has a sliding panel to close up the window area. It has switches on both sides so that you can use as an exhaust to pull air through or blow out. The speed of the fan is not what I expected.",
"The height is 10 inches and the length is 22 inches but can extend to 33 inches. As for thickness I think it's approx 3 inches."
] |
Are these latex free?
|
[
"The blister bandaid box does not say latex free. The Activ Flex bandaid does say latex free"
] |
2 questions: does it run on battery in addition to plugged in? if set the frame as portrait, will it still automatically adjust to landscape?
|
[
"It must be plugged in to operate. My user manual says \"it will automatically rotate vertical photos so they are displayed the right way on the screen.\""
] |
does it make audible alert or just show distance?
|
[
"audible works well, try to place senors the correct distance above the ground and apart per instructions.",
"It does both so far my customer is really happy with it which has been about 7 months"
] |
My Dell INSPIRON 1545 original dvd/cd model is an AD-7585H , will this work in my laptop as a replacement and can I change the bezel with the original
|
[
"I replaced the DVD drive in my Inspiron 1545 - ordered the replacement part on Amazon. The bezel was NOT the same, but we were able to switch them...can't remember if I had to remove a screw, or just pop it off. Most DVD drives are made the same and can be replaced easily. Look on YouTube for actual videos of how to do it.",
"I had no issues. I took out one screw. Attatched the cable and slide the drive in replaced screw. It was a very simple process. I am no expert on computers. I can only share my experience with repairing it.",
"I changed the bezel on mine, this one fits in several models and has worked fine on mine! My bezel had one broken clip but it snapped right in."
] |
does the set operate on 120volt house hold current?
|
[
"Yes, However when a MH light first comes on it needs a bit of power. I would ensure its on a line with a higher amp breaker. It kept tripping out my bathroom circuit. After the light was fully on, I could reset it. If it happens to you, PLEASE don't up the breaker amperage. Find another source that will handle it. Amazon does sell fire extinguisers though."
] |
Do they also make a salt mill? Now using Himalayan rock salt.
|
[
"No, there is not a salt version of the 9-inch Magnum Plus pepper mill. There is a salt version of the 6-inch Magnum. It is available in white and grinds coarse sea salt. We do not recommend customers use Celtic, Grey, Himalayan or Pink salt in our mills as those salts are not fully dried and can gum up or clog the teeth of the ceramic grinding mechanism. Salt and Pepper grinders are designed to crush/grind dry, brittle material. \"Moist\" or not \"damp\" peppercorns or salt crystals are never recommended. Coarse sea salt is our recommendation - with the crystals about the size of a peppercorn. Hope this helps."
] |
which ocean or country does this salt come from?
|
[
"Hi - it comes from a salt water lagoon on the Pacific coast of Mexico. The salt is processed organically by hand and solar evaporation. Does that answer your question?",
"I believe it comes from the coast of Mexico, possibly Sayulita. Pacific Ocean. Could be completely wrong though."
] |
How long is the thread? / Max depth of threaded portion?
|
[
"The threaded portion is 7/8\" long which is also the mx depth as there is a small shoulder that you cannot thread in past."
] |
what is weight load?
|
[
"Don't really know but would say you should not sit on it.. it is made for cleaning fish."
] |
Are the rear speakers wireless?
|
[
"No, the 5 main speakers are identical except the placement of mounting brackets, and are driven by the amp in the receiver. The Sub has a built in amp, and is connected via a shielded RCA terminated cord."
] |
Does anyone have a tip for picking up soft poop (large dog) without leaving some on the grass? Sorry, not really about the bags, which I do like.
|
[
"If your dog doesn't walk and poop, and stays still while pooping, then carry a small newspaper (like Sunday ads) and when he crouches, slip it underneath! Works wonders!",
"This happens to my dog sometimes and I try to get underneath it with the bag before picking it up.",
"Impossible! There will always be a treasure left behind. Especially with a large dog.",
"WOW sound like my problem, if I am in my own yard, I use a small garden shovel to get under it and lift it off the grass, it works. (I know, what to do with the shovel...lol) But if I am out walking, I just use a paper towel (uugg). I am going to try the newspaper like the other reviewer suggested.",
"Great question. Unfortunately, no solution. Personally I would be more concerned on your dogs stool being soft as opposed to solid. Then again I'm no expert. Hope that helps.",
"Carry an old napkin in your pocket to wipe up after the pick up. Do it all the time with my yellow lab, never need it as long as I carry it, Murphy's Law."
] |
Will the head tilt to hold the camera 90 degrees (i.e., in the vertical position)?
|
[
"Only if the camera is very light. But it is not firm. Dont buy it. I think it is the only Sunpak bad stuff."
] |
Yes this a goodlight meter for photographers ??
|
[
"Yes it is because you can determine if there is enough light for an specific quallity picture",
"I would not use it for photography. There are many better meters to use for that purpose. This meter is made for measuring foot candles and such and is useful for comparative light levels. Gossen or other photo meters would do better and be directly viewable with the scales on such a meter."
] |
Can I use this for my 2013 Honda Fit?
|
[
"No, I don't believe it will. The 2012-2013 cargo cover is a different shape. Mine is a scroll type and yours is folding. You could search this on Amazon \"Honda Fit Genuine Factory OEM 08U35-TK6-111 Cargo Cover 2013\" ...good luck."
] |
Same question as the other customer. There is a hole for the drain plunger to open and close the drain, but where is the plunger?
|
[
"Hello Grace, I honestly asked the same question. We had to go to Menards to purchase the drain plunger for additional $$$. I do not understand why it doesn't come with the faucet.",
"Mine didn't come with one either, luckily I had it from the old one as I was just swaping out the same style faucet. I didn't complain, but if you don't have one I would. I do have to say the quality of this faucet is better than the original faucet we had, I'm just glad I saved my old plunger. Sorry I couldn't be more help."
] |
can you do triceps extensions without the weights hitting your hand/arm?
|
[
"I just picked up the weights and tried 3 different tricep extensions. First, bent over kickbacks. If you only use the lowest 4lb setting, it is as wide as a stick (it's only the bar) so it doesn't graze at all. The next step up is 10lbs which starts to add the plates. You'll find one side is shorter than the other, so it is possible to keep them close to your side, but the balance will be slightly off. However, I have to say even holding it normally and trying to stay strict in form, I don't have a lot of problems. You may notice it slightly grazing your thigh. Second exercise, overhead one-hand tricep extension. I didn't have a lot of problems. Third exercise, two-hand overhead tricep extension. You are able to hold the end of the handle instead of holding your hands against the plates. Didn't seem to be a problem for me. Also, I guess I should mention for P90x I do lying tricep extensions with these. All in all, I would say you could do tricep extensions fine unless you are super picky about them hitting your leg. I'd almost keep in mind more that the weight increments are 4, 10, 15, 20, 25, 30, etc. If I was only concerned about triceps, I might want a 5, 7, 10, 12, 15, 17/20 setup concentrating on better form. Just saying.",
"Hi Jenny,When doing kickbacks it is difficult to alleviate the weights from grazing my side. When doing extensions, I must hold the weight by the ends, in which case the opposite end hits my shoulder. I still find I can workout effectively- but it is sort of a headache. I definitely would not bother with any other type of set however- unless you can find one which is much smaller, as this set seems well made thus far. Also though, if you are looking to just maintain good physical fitness, and are not too concerned with having varying weight capabilities, you may want to consider some kettlebells as those would definitely fix the problem of bulk. I hope this helps! Best wishes. Hi Jenny,When doing kickbacks it is difficult to alleviate the weights from grazing my side. When doing extensions, I must hold the weight by the ends, in which case the opposite end hits my shoulder. I still find I can workout effectively- but it is sort of a headache. I definitely would not bother with any other type of set however- unless you can find one which is much smaller, as this set seems well made thus far. Also though, if you are looking to just maintain good physical fitness, and are not too concerned with having varying weight capabilities, you may want to consider... » Read More Hi Jenny,When doing kickbacks it is difficult to alleviate the weights from grazing my side. When doing extensions, I must hold the weight by the ends, in which case the opposite end hits my shoulder. I still find I can workout effectively- but it is sort of a headache. I definitely would not bother with any other type of set however- unless you can find one which is much smaller, as this set seems well made thus far. Also though, if you are looking to just maintain good physical fitness, and are not too concerned with having varying weight capabilities, you may want to consider some kettlebells as those would definitely fix the problem of bulk. I hope this helps! Best wishes. « Show Less",
"You can, but you have to be a little more conscious of how you hold the weights."
] |
Can this be used for a washer or dryer?
|
[
"It probably could but I would guess that large appliances are better plugged in directly to a dedicated wall plug",
"I wouldn't think for the dryer because the plug is a different configuration and the wire is a larger gauge. Possibly could use for the washer but i wouldn't."
] |
does this reader word with 2004 dodge ram 1500
|
[
"I'm using this reader in a 2002 NISSAN ALTIMA compliance with OBDII and is working great with app TORQUE. For the truck you are describing please make sure is OBDII compliance and also you have to download the app.",
"Mine works fine with a 2006 Land Rover. I'd be VERY surprised if it did not work just as well with 2004 Dodge Ram. This device will give you a reason to hang onto your old smartphone after you get a new one. You can use an old smartphone for lots of things even if you don't have cell service anymore. In a vehicle you can use an old smartphone both as a dash cam, and as the display for this engine code reader.",
"It should. It's supposed to work on most cars built since 1996. I've tested on a Mazda 01, Chrysler 03, and Honda 06. Since Dodge and Chrysler are built by the same company I'm quite confident it'll work on your Ram. I hope this helps.",
"It should ,I used it on all kinds of cars and vans.I had it on the wife's 2011 toyata seinna my 01 dodge 1500 my Chevy 2500 duramax my 03 Subaru Baja and many more cars shouldn't be a problem"
] |
Does this unit have a out side door / cover ?
|
[
"It does. It comes with a new white door. We had to trim the opening in the side of the camper a little because the styrofoam insulation was thicker than the fiberglass on our old unit. Otherwise its an easy replacement.",
"NO. My water heater did not come with a cover. The seller must be the one to determine whether or not it comes with a cover.",
"Yes it comes with the cover. Installation was fairly easy also no special tools required. I did however buy extra putty tape for weatherproofing but I think it came with a small roll.",
"No, you will need to keep the existing door from your cammper. WE gave ours a fresh coat of spray paint as we had some smoke damage when our unit failed."
] |
Does the cover come off to wash?
|
[
"Oh yeah. Hand wash, machine wash or if you wash it in a creek. It comes off. You could hose it down too with or with out kid in it!"
] |
Can you use this in a "pour over" coffee cone type of brewer? Like a one cup Melitta?
|
[
"Yes you can. You can use it as regular coffee, without the caffeine. Enjoy.",
"Yes, we did, adding a tablespoon to my regular coffee to add the chickory flavor. I think it worked a bit better in our cold brew system but it does work for hot pour over."
] |
what is the chirping noise which occurs about every 3-4 mins -- 1 beep?
|
[
"I know this is a few months old, but just thought I'd pitch in, since I've ran into the same thing on two different FireX detectors (I think it can happen to several brands though). Even after replacing the battery, the alarm code can get stuck and the unit has to be reset. Remove the batteries, unplug from electric. Hold down the Test/Reset button for 15-20 seconds. Plug it back in, but the battery back in and the unit should beep once to say it's been reset and the chirping should stop. I'm getting ready to replace mine because we go through this about once every 3 months.",
"Make sure you have a fresh battery and hit the reset button and that should stop chirping. The instructions recommends the type battery to utilize and it does make a difference!"
] |
Hello, i have an older tamron 18-300 lens for my canon t5 dslr. will adapter work for my sony nex5 since the tamron is made for a canon?
|
[
"No, this one is for Canon FD lenses (old ones 70's I think). You need one for EF lenses.",
"My older Canon (about 1970's vintage) had FD lenses but needed an adapter in order to fit the Tamron Lens. The TAMRON adapter is named Adaptall 2 for Canon FD.Unfortunately it will not interface with the Fotodiox adapter designed for Sony \"E\" lenses and Canon FD. I just tried it!"
] |
can this pole support the Alto Professional TS112A 12-Inch Active 2-Way PA Loudspeaker with Built-In Mixer
|
[
"It may. Depends on weight but I personally would buy something else. I've had problems with the poles locking. We've only used them for a year and they're slipping alrwady. Spend more now. Save the aggravation"
] |
Can this thermostat be used on a heat-only system? We do not have central ac.
|
[
"Yes, it has several different wiring schematics for various applications. Setting the 30 day filter changing alarm has been very useful too. It can be set to Heat only at a specific temperature, or you can program a weekly schedule for different temperatures on different days or various start and stop times.",
"Since someone installed my thermostat for me, I'm not sure how it's wired for heating and ac. However, you can switch to use the heat settings only.",
"Yes you can just put the system on just heat or just air.. Hope this helps =)",
"Based on the quick start guide the unit will work with a system that is Heat Only or Cool Only. There is a selection for only heat or air.",
"I have a heat only system too with window A/C units. It works fine controlling just the heat. Great thermostat have had no problems."
] |
Can you purchase the vinyl strip on it seperatly?
|
[
"Hi, yes the strip comes in the box not attached to the glass. It comes as part of the kit and you cut it to fit. As far as buying it separately, I don't know. You could contact the manufacturer, or maybe even get something from the hardware store you could rig yourself. Hope this helps.",
"Do you mean the clear plastic part for the back, or the black middle piece?",
"Yes but they seem to be extremely expensive . Many DIY methods for repair on google"
] |
What about keeping the interior surface algae free?
|
[
"I spray mine with a dilute clorox spray at the end of the season and rinse before storing for the winter.",
"You could empty and scrub it periodically but since I'm only using the water on outdoor plants, I'm not concerned about the algae.",
"Agree w the bleach solution. You can also add a cup of bleach periodically when you are using it in a storage mode. This unit is opaque,, so it should not support much algae growth, as would a transparent one made e.g., from a 55 gal. Coke barrel. Agree that algae should not be a concern when using water outdoors. Regardless, take care that children do not drink the collected water.",
"If you leave the rain water in it, you will get algae, but use the water as needed, do not let that happen, it athe water will turn ugly after a week to 10 days anyway, use it so you have room for more fresh water, or for your inside plants."
] |
How long is the ponytail?
|
[
"I don't know the inches exactly; however, the ponytail was longer than I had anticipated. It came down to the middle of my back. I actually trimmed it some (I am not a hairstylist) so that it was at a length I was comfortable with.",
"The pony is 18\" but the part that wraps is only 3\" and that's where I don't like it and don't recommend it.",
"Very long. I am NOT where I could measure it but its pretty long. I have thought about cutting a few inches off"
] |
what kinde of hard box i can instal on thiss cross bars so its not gonna be toching the top of the roof
|
[
"These cross bars have a combined load rating of 100 lbs. Any rigid cargo box from Yakima, Thule and such would work if not overloaded."
] |
I have a NuTone 99080402 old fan, will the 970120401 work as a replacement?
|
[
"Original motor no longer listed on Nutone website, they recommend this as replacement.",
"Check which way the motor points. thats the easiest way. compare it to the picture."
] |
does it come with ammo
|
[
"No amazon does not sell anything with live ammunition. It is just an empty box to store ammo with."
] |
1.are these aluminum or stainless?2. how are are the outside bottoms made?
|
[
"Inside they are stainless (ceramic). I think the outside bottom is aluminium.",
"heavy gauge aluminum, I believe. Bottoms are a little too rounded for my taste. Therefore, heat is uneven, especially with a flat cook-top. Definitely non-stick, though. Cleanup is easy.",
"well, I gave them as a Christmas gift, but heres what I know, these are aluminum with ceramic interiors..Don't know how outside bottoms made ,hope this helps a little"
] |
What length are the included cables?
|
[
"All four cables, Power, Analog Audio, DVI, and VGA are 6 feet long. No HDMI cable provided."
] |
OS: Will it transfer the OS (Windows 7) as a clone.....?
|
[
"Basically, what This Unit, or rather the software does is to copy a Mirror image of your Current internal drive to the hard drive you have connected via This Unit. And it Will be a bootable copy, given the original hard drive is. The Windows Will be copied over just Like it is on your Current hard drive"
] |
Do I need my computer in order to use this?
|
[
"No, it works as a stand alone amp simulator with FX, but has the advantage of using a computer via USB 2.0 cable to download new sounds, software updates and use a editor/librarian for organization.",
"No, you don't. It simply has the option to use this device as a sound card for your computer if you wish to take advantage of this feature. Also if you have a computer it has a nifty librarian application that allows you to sort, store and edit patches. You don't need the computer to edit patches because you can do it on the unit itself but it is handy if you want to download other peoples patches. Note that you will need a computer to update the operating system through an internet connection. For the most part it is a great portable stand alone unit.",
"No. Your computer may help to set up, but if you are savvy, you can do all programming with the unit.",
"No, it's capable of being used entirely on its own. Though if you want to record anything, a computer is needed."
] |
Do Forstner drill bits have a drilling depth limit or can Forstner bits drill through a 4x6 piece of lumber or deeper?
|
[
"You can go as deep as you need to, within reason, using shank extensions. They cost 5 or 10 bucks for 5-inchers and can be piggybacked. As others mention, chip clearing is always necessary, which can be a pain for deep holes. I drill deep holes most often on the lathe, and at least in horizontal boring an occasional blast of compressed air down the side of the hole does the job quickly without having to constantly back out the bit.",
"To pass through a 4 x 6 piece of lumber you would need to purchase an extension.... after about 2 1/4 \" the chuck and your drill would be touching your material without an extension.Extremely great products for very well cut holes",
"The only limit on drilling depth is the shank length. With a shank extension, available at woodworking supply stores, more depth is possible. Clearing the bit is very important no matter what depth you are drilling.",
"I had a custom drill shaft extension built by a local machine shop so that I could drill through a stack consisting of one 4x4 and 2 each 2x4's (nominally about 6-1/2 inches). The shaft is actually capable of drilling through as much as 16\" of material. It's slow going and you have to drill a short way, back out to clear the bit, then go back in. I also have to move the table on my drill press up and down to accommodate its full length.",
"They are limited to the distance between the cutting face and the chuck. Chip removal could become an issue for a really deep hole. A shaft extension could get you to who knows where....",
"I would say that they are limited to about a 2-3 in depth. A 4x6 would be too much for a through cut."
] |
what is the width of the rim?
|
[
"It measures 20mm across the brake track. It's a standard rim. It was an exact replacement for the Matrix rims on my 1985 Trek 600. It laced right in with the same hub and spokes. It has given good service so far. The material is not hardened, so wear may increase unless soft pads are used.",
"The inside width it 13mm and the outside stated width is 19mm, but I get 20mm when I measure it"
] |
can i upgrade this computer ? what kind of montior can i use for this?
|
[
"We used a flat screen monitor that we had around the house and it worked just fine. We did have to upgrade the video card ($40) and we've replaced the disk drive ($40), it wouldn't run a game we wanted to play... assassins' creed. You need to think of this as a starting point. Yes, you can and will need to upgrade parts and pieces. This box was easy to open and both parts that we replace were simple to add/swap out.",
"What were you thinking of upgrading. You should be able to use just about any monitor you want",
"I would check you tube this way if can upgrade they will show you what to do."
] |
what is total length dimension?
|
[
"Mounted on the crank they are four inches from the face of the crank to the end of the pedal, and 3-1/4\" wide. They are on the small side. I put them on my Motobecane Mirage Pro raod bike and they work pretty well. No special shoes, no falling over that can happen with \"clipless\" pedals.",
"I sold the bike... howvever could you call the mfg or the distributor and get the answer...."
] |
Do these pants have the zip-off lower leg portions which transform them into shorts?
|
[
"No. They do not. I'd like a convertible pant but don't know who else makes them."
] |
is the flash automatic
|
[
"Hello June, yes it is. It has a feature that you can shut off the full automatic but we have never used it. I just took a few pictures in my office with the lights out and in near complete darkness the pictures were great- the pictures would make you think i was in a normally lit room."
] |
Power question: Can I remove the transformer and power this light with a 12 volt source? I'm trying to wire this on a vehicle. Thanks!
|
[
"I see the possibility, but it's not set up for this. I'd try it and return it if it didn't work.",
"I don't think that would work very well I have had one apart and the board is small and integrated."
] |
Multi-point Routing: As a typical everyday driver how usefull is this feature?
|
[
"I personally wouldn't buy a GPS without multi-point routing. I am a casual driver (not business) and we use the multi-point function all the time - best for plotting a day's worth of traveling in the most efficient way."
] |
Will this fit an 1980 Taurus 66 6 shot 357 magnum?
|
[
"I am sorry but I have yet to own a Taurus and have no experience with them. If you Google Pachmayr click on revolvers and them follow the prompts it takes you to a fit chart and the Taurus 66 is on the list. Hope this helps'",
"I AM NOT SURE IF THIS FITS THE TAURUS MODEL 66. I BOUGHT MINE FOR THE s&w; MODEL 10 WHICH FIT PERFECT. Also I do have a Taurus model 82 -38 special and this is a clone of the S&W; model 10 which will fit also. Good luck with your search.",
"The Pachmayr web site is \"http://www.pachmayr.com/home/revolver-grip-details.php.\" I looked but could not find an answer and the serial number makes a difference. I would suggest calling them directly to find a match. You can reach them here: Via Phone Consumer & Dealer Sales and Service800-225-9626800-423-9704860-632-2020 Via Fax 860-632-1699 Hours of Operation Monday through Friday, 9:00 am to 4:30 pm, EST",
"I do not know the Taurus 66. A friend use it in a Llama Scorpio (Spanish S&W; M10 2\" copy), and should made some fitting work. I sugest you mail to Taurus and Pachmayr with the same question, generally the manufacturer give adecuate help. Good luck."
] |
I need something to use an electric chain saw with an adapter to the cigarette lighter. What do I need? Please help.
|
[
"You need to identify the power requirements of your chainsaw. (Watts/amps). The starting current is typically 3-4 times the rated current of the saw. Once you identify those 2 items ensure the inverter that you get has a fuse sized larger than the 3-4 times the rated current of your saw and that the power consumption of the saw is less than the rating of the inverter.",
"How many watts is your electric chain saw? Based on that it should help you pick out the inverter wattage you will need.",
"Check the power requirements in watts of the electric chain saw (should be listed on the device), if less than the inverter watts rating it should work. However, I think it is likely the electric chain saw will exceed the watts available in an inverter plugged into a cigarette lighter / DC power port. In this case a larger watts capacity inverter connected directly to the auto/truck battery would be needed.",
"Alana, thank you for your interest in the PV375. In order to determine if the PV375 is the best fit for your application, we need a little more information on your application. Please call our Presales Applications Team at (773)869-1773 or email presaleshelp@tripplite.com so they can recommend you a product that will fit your application's specifics."
] |
Does it have a steam feature or is only a burst of spray feature?
|
[
"Yes, it has a variably adjustable steam feature. Just slide the adjustment lever from low setting to high or anywhere in between.",
"This iron does have both a steam and spray feature. I just used both for the first time this morning.",
"Yes, it certainly has a steam feature and it's pretty awesome. Great iron I would definitely recommend it",
"Hi Susan, This iron is remarkable. Its a wonderful steam iron, (thats the feature I wanted most) and yes it does have a spray feature. Actually this iron has alot of nice features. Well worth the money !! I hope you buy it. JS :)",
"it has both shot of steam and spray. Have to say I had my doubts as I had never had an inexpensive iron worth a toot. This little (inexpensive ) thing is rally good. I had to switch to a lighter iron due to shoulder issues and took a chance here. It has worked very well and I have been very happy with it."
] |
I got this knife today but its not unlocking when i push on the lock.
|
[
"Return it if you think something is wrong, It should close by moving the inside bar over to release the blade inside where the blade sits.",
"Check to make sure their is nothing stuck between the locking mechanism and the frame. Also make sure when unlocking to fully press down on the locking mechanism, it may be jammed. I hope this helps good luck",
"If the knife is already open and you're trying to close it, I would suggest adding more force into the locking mechanism. If it's still stuck for any reason I would ask the seller for an exchange/ return for it being defective.",
"When you first get this knife it is a little stiff. Just work hard on the lock for a bit and it will be good to go.",
"I noticed on mine that I sometimes had to manually push the blade a bit further out to get the lock to release properly on occasion."
] |
Do you oil the pan first?
|
[
"No - just add your beaten eggs and whatever else you want in it. It is fabulous.",
"You're Welcome! I love this thing, so quick and easy! and omelets are nice and fluffy and ready in no time at all",
"NO! It needs no oil at all, just put the ,ixture into both sides, cook according to directions. Makes nice fluffy omelets and they slide right out, and you just have to take a damp paper towel and wipe it clean!!"
] |
Has anyone used this on cream or white leather furniture?
|
[
"Test it first. If you use a lot, it will darken the leather but it seems to return to the original color in a few days."
] |
Will this punch a hole through tough masonry?
|
[
"Yes it will but it will take a lot longer than if you had a hammer drill so basically it isn't the right tool for the job but if you don't have to do many holes you could still get the job done without having to spend more for a hammer drill.",
"Probably not. The best tool for penetrating tough, dense concrete is a rotary hammer. A hammer drill might work for smaller holes such as pilot holes for self-threading concrete screws. Hammer drills are limited by their chucks and drill bit size- usually 5-8\". It takes a different type of chuck to keep the the drill bit 'in' the chuck and rotary hammers have that chuck."
] |
Can I make 2 holes for legs to go through and walk around, or will this deflate the boat? Looking for a costume.
|
[
"From memory the base inflates separately, so no problem in puncturing the base.",
"I think there is two seperate air nozzles 1 for the bottom & 1 for the side I dont think they aretogether so maybe its all packed away now so cant really be sure sorry"
] |
Does this come with the mounting hardware?
|
[
"I bought mine a year ago but I'm pretty sure it did. The only thing you might need would be a screw or a nail. But it's pretty much ready to go.",
"Yes. Included are the bracket and screws with simple drywall anchors to affix the bracket to the wall. One heaby duty screw for the center of the back of the dartboard to locate in the bracket. Plus 3 rubber \"feet\" to stabalise the board against the wall.",
"Yes it does and it is easy to install with a phillips head screw driver and a hammer"
] |
Does anyone know the dimensions of the hole? Personality differences aside, do full sized, medium-large cats fit in it and utilize it frequently?
|
[
"It's 7 inches across....we have small to large cats and they all fit in it without a problem. Some of our cats use it regularly but they all LOVE the hammock up top."
] |
How long is the power cord?
|
[
"about 6 feet long. i returned the product because it didn't work as advertised"
] |
Is the color of the chairs what you see in the picture?
|
[
"Because I ended up cancelling the order, I don't know about the color. I had a very difficult time getting the supplier to arrange shipping the chairs to me. They were very personable on the phone, but completely uncooperative about scheduling the delivery. I ended up going to a more local furniture store and they brought the chairs out to my house within a week!",
"I'm sorry, we don't have these chairs anymore, so it's hard to say...but I don't remember being disappointed with their color...not sure",
"I found the color of the chairs to be exactly what was pictured and I was trying to match it to one other chair. A perfect match!!"
] |
Will these fit a 2007 G35 Sedan (Journey)?
|
[
"It says in the description that it fits the G35. We have a G37 and these sensors were exactly what we expected. They work great and were significantly less than getting them replaced at the dealership. Costco installed them when we put new tires on the car."
] |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.