Datasets:
embedding-data
/
Amazon-QA

Dataset card Data Studio Files
xet
Community
1
query
stringlengths
20
2.05k
pos
list
how much does it weigh
[ "That would be a question for Livestrong if you need an accurate number. It is heavy but one adult can lift the rear and push it fairly easily because it has rollers on the front cross bar that rests on the floor. If I had to guess, I would say it weighs approximately two hundred pounds. It's a good machine. We have no regrets with this purchase.", "I would guess about 200 pounds. If an adult lifts the rear, one can fairly easily move the machine as the front crossbar has two wheels. Good machine." ]
I wanted to epoxy this (or 2 or more) to a lazy susan - what is the base like? or is just the three "legs" ? thanks.
[ "It has \"legs\" that stick out in the front but it sits on the entire bottom. No problem to glue.", "I think that would be very doable but it would have to be A very large lazy susan. This box is awesome and a steal at ten bucks. We bought three more and are organizing everything.", "the bottom on MY unit is NOT flat...it has the two ridges (legs) one on each end and then one ridge (leg) in the middle. Those three slim contact points would be the only place where the unit would actually touch the lazy susan. My unit sits on a desk. The distance between the bottom of the unit and the desk IN BETWEEN the \"legs\" is approximately 1/4 to 1/2 inch. You would have to construct a filler or spacer to fit between the \"legs\", glue that to the unit, and then glue the unit to the lazy susan in order to establish a 100% contact between the unit and the lazy susan. I took pics of the bottom of the unit but don't see a way to attach them to this response. :-( the bottom on MY unit is NOT flat...it has the two ridges (legs) one on each end and then one ridge (leg) in the middle. Those three slim contact points would be the only place where the unit would actually touch the lazy susan. My unit sits on a desk. The distance between the bottom of the unit and the desk IN BETWEEN the \"legs\" is approximately 1/4 to 1/2 inch. You would have to construct a filler or spacer to fit between the \"legs\", glue that to the unit, and then glue the unit to the lazy susan in order to establish a 100% contact between the unit and the lazy susan.... » Read More the bottom on MY unit is NOT flat...it has the two ridges (legs) one on each end and then one ridge (leg) in the middle. Those three slim contact points would be the only place where the unit would actually touch the lazy susan. My unit sits on a desk. The distance between the bottom of the unit and the desk IN BETWEEN the \"legs\" is approximately 1/4 to 1/2 inch. You would have to construct a filler or spacer to fit between the \"legs\", glue that to the unit, and then glue the unit to the lazy susan in order to establish a 100% contact between the unit and the lazy susan. I took pics of the bottom of the unit but don't see a way to attach them to this response. :-( « Show Less", "Depending on how big the lazy susan is, this might work for you. There are raised ridges (legs) on both \"ends\", but in between them, the bottom is flat (allowing you to attach with epoxy). The distance you'd have to work with is approx. 13 inches. Hope this helps!" ]
Are you indeed including all four sensors shown in the ad?
[ "no, only one sensor comes in the box, to find the exact replacement for your vechile which, it is either threaded or flanged mounted, go to the denso web site", "The four sensors that I bought were exact replacements for my 2005 6 cly Camry as listed by the Denso web site. And, indeed, they were the exact replacements. Replacement was trivial except for the upper sensor on the cylinder bank next to the firewall. That replacement required the use of a hydraulic lift.", "No you only get the one. They are just showing an assortment. The actual sensor is not even in that pic." ]
can this be sprayed through an airbrush? And does it react to oxygen like some moisture cured urethanes?
[ "I used this through a very small HF mini sprayer.http://www.harborfreight.com/adjustable-detail-spray-gun-92126.html Not an airbrush, but I can't see why you couldn't. It can be thinned ( which I did, I think I thinned it by like 5-10%)I used Xylene. And yes, like most epoxy like mixtures, high humidity can cause issues with spraying. That was not an issue for me as I live in Northern CA which has very low humidity.There is a pretty detailed instruction list here http://qr.absolutecoatings.com/QR-assets/downloads/POR15/GlistenDirections.pdf Good luck", "Yes, But must be put on heavy.It still does not give a perfectly clear coat, It dulls up the chrome a little." ]
I tired this with inputting in every order possible and all I get is a black screen with no audio or video is mine defective? (i'm using a Samsung galaxy s2 and the hdmi cable works with other devices and the charge is the one that came with the phone I tired this with inputting in every order possible and all I get is a black screen with no audio or video is mine defective? (i'm using a Samsung galaxy s2 and the hdmi cable works with other... » Read More I tired this with inputting in every order possible and all I get is a black screen with no audio or video is mine defective? (i'm using a Samsung galaxy s2 and the hdmi cable works with other devices and the charge is the one that came with the phone « Show Less
[ "I'm having the same problem at this time (S2) and it's only showing a black screen when I hook it all up.", "had the same experience... doesnt seem to work with ICS or JB GS2... it might have worked with gingerbread and maybe thats why some say it works with the GS2...they must be not updated or old reviews.. I RMA'd mine and got my money back since it didnt work as described." ]
Will this work on ceramic tile in the shower?
[ "I'm not sure if it will. It may build up over time and be hard to remove. I don't like it for car windshields. As it wears off it streaks and makes it very hard to see, especially at night.", "I think it does - I use it on the glass doors in my shower and it works great there!" ]
Is it appropriate for a 9 yr. old?
[ "I think it would be very difficult for a 9 year old. They aren't going to know most of the answers.", "I think parts of it are okay for a 9-year-old, but there are song references and trivia that would be way above that age group.", "If I remember right it says adult version on the box. I returned it and did not actually open it because of that." ]
does anyone know ow many watts this system outputs approximately???
[ "Hi Brian, I was trying to find out the answer. BOSE WANTS YOU TO LISTEN TO PRODUCTS... I don't believe they list watts anywhere. Maybe if you call them. What I can tell you is.. DO NOT BUY THE FIRST ONE. The SOUNDLINK ll is the one to get. I have iphone 5. It PAIRS PERFECTLY. It SOUNDS GREAT!!!! GOODLUCK ! GREAT HOLIDAYS" ]
How long does it take for the terrible smell to go away? (I asssembled it 5 days ago and had to remove it to the basement.)
[ "LOL! It was pretty bad the first day - I got a headache from it. I don't smell it at all now and it's been less than a week.", "I thought it was just my imagination. Glad to hear it wasn't. But I didn't think it was that unbearable and the smell was gone in less than a week.", "MY tables never had a smell. I used some lemon furniture polish right away and it was fine.", "There was no odor at all when I received my table. Sorry you had that trouble.", "What smell? There was no smell from mine. Was your package outside and an animal tangled with it?" ]
I'm looking for one stopper with a nominal diameter of 2 inches somewher in the middle. Is one of these that size?
[ "The photo shows multiple sizes but this is only one size. This particular stopper is a size 6, and is about 1.5 inches across the top meaning it would be about 1 inch in the center. I believe you need at least a size 10.5, or even an 11. It is measured in millimeters across the top and should give you an idea what the center is. Do a search for \"Size 11 rubber stopper\" and you should find what you are looking for." ]
Any PDF of Manual for this device?
[ "Not sure why you would need a virtual manual, but it comes with a physical one when you purchase it. It tells you everything you need to know about the device." ]
Does this bed fit a standard crib mattress?
[ "Yes, it does.We also used our crib mattress. But know that this bed is not a good quality. Cracks easily." ]
I am a guitarist /vocalist looking for a battery powered speaker to use for performances. Be honest, Does this sound good?
[ "I use the speaker for starting track meets, honestly, I wish it were a little louder." ]
How long is the threaded portion?
[ "About an inch and a half or so. Not much is needed for a water heater install.", "Not very. I had a devil of a time screwing this into my brew kettle, with 2 seal washers, a lock nut, and a flat steel washer." ]
Will this lens work on an A6000 without any adapters?
[ "Hi Poise, Sony A6000 is an E-mount camera and the Sony SAL-2470Z Lens is an A-mount lens. -Vincent" ]
Can the seat be locked with the front tilted UP while the back is tilted as far upright as possible? (sorry, wrote it wrong before!)
[ "Hi Christine!Thank you for your inquiry!To the best of my knoweldge the answer would be yes the chair can lock in that position.AisteBisonOffice" ]
Rusty water drips from the rolled edges after dishwashing. Does anyone else have this problem? Do all sheets have rolled edges that trap water?
[ "Yes, I just used my Farberware sheet , washed it by hand, and left it to drain where it does rust at the bottom-outside. I am just wiping it off, but think I need to start drying it immediately instead of letting it drain dry. I am ordered more though as they are a good non stick.", "I have had that problem when using the dishwasher. I just lay the pans on their side for a few minutes on a towel before putting them away.", "Janthree, Usually I don't wash these (sound awful?), but it's because I always use parchment paper when baking. You will find this to be some amazing stuff and will cut your cleaning time in half then you will only need to use damp cloths to clean. Just don't soak .", "Have not had this problem ... yet. Mine have rolled edges and when I just looked at them I noticed two small holes at either end right under the roll that might allow water inside the roll. I am wondering if you soaked them? I've never soaked mine, just quickly washed and put in dish rack or in the dishwasher." ]
Will this work with a late 2009 iMac 21.5"?
[ "Not compatible with late 2009 iMac 21.5\", this drive used IDE interface. Late 2009 iMac 21.5\" used SATA interface." ]
Is this one or 2 pedals
[ "It is one pair. They are pretty durable. I live on the east coast where it is all short track, tight terns, and logs. I am always slammed them against something. I now run on clipp less pedals but these are great flats." ]
Will it work with a MOTO G (1st Generation)? I have 2 stylus's that work fine with my Asus Transformer, but are not sensitive with the MOTO G.
[ "Hi JM, Kendall here from The Friendly Swede! Thank you for your interest in our product! Though I am not too familiar with your particular device, these stylus pens are compatible with almost all touchscreen devices. If you have similar pens that are not responding with your MOTO G, maybe you should try our fiber tip stylus pens. Our best selling fiber tip stylus pens can be found in the following link: http://www.amazon.com/Friendly-Swede-Replaceable-Hybrid-Stylus/dp/B00K4NVS86/ref=sr_1_6?s=electronics&ie=UTF8&qid=1426217199&sr=1-6&keywords=friendly+swede+fiber More often than not, the fiber tips tend to be far more responsive than the rubber so you might have better luck trying something similar to the pen in the link above. If you have any further questions, please feel free to contact us at the customer service link below and we will get back to you within 24 hours :) All the best, Kendall / The Friendly Swede", "I use these with my HTC m8 one and they work great! Even with a screen protector on.", "I would think on any touch system. I will say that I have problems with all of them it seems, during the colder weather, to make them slicker. I use mine on my FIRE, and iPod. Hope it helps.", "Not sure about Moto G but works well on I phone, I pad, I pad mini, and Dell touchscreen." ]
No instructions came with this. Do I have to charge it for the blue light to come on? Where are the drivers ?
[ "on the paperwork or box there's a place to download drivers --that's all I can tell you - I don't like it at all", "Just plug the camera into a USB port on your computer. The computer will recognize the device, download, and install all the software for you. Or you can go to Microsoft's website and download it. The blue light only comes on when the camera is on. You can use Windows Live Movie Maker to test it." ]
can stopper be used without the top (ring?) in place...reducing its height in refrigerator?
[ "Absolutely. The idea is to prevent the oxygen from going in with wine. If the cork is tight in its place the top does not matter.", "Actually it may be a good idea to use it without the top. With the top on it absolutely does not stay on." ]
is this carseat airplane safe.
[ "What I like about it is that this car seat is slim and doesn't take up much space. The question is are airplanes safer than these car seats?" ]
The measurements show 75.6 x 20.7 x 4 ???? Whats the actual 3rd (height?)number?
[ "Same as Pburg03--70\" wide, 19\" deep and 33\" tall. I LOVE THIS PIECE OF FURNITURE. It's beautiful and holds loads of stuff." ]
I have 2 big sim cards. However, I notice this phone has 1 big and 1 small for sim card slot. What can I do?
[ "Yes, this phone is a DUAL SIM phone, but different from the others because it uses a MINI SIM card and a MICRO SIM card. This is not a problem, when you get the SIM cards from your carrier just inquire about this sizes, if you currently have 2 SIM cards of the same size, you only have to ask your carrier for the exchange. You can also use only one SIM instead of 2." ]
is it easy to assemble and attach the handle
[ "Yes, there are just a few pieces. The sweeper, two parts to the handle, and the end cap. All screw on except the end cap, I think that's a push on. Took me only a few minutes and I was sweeping away. Hope this helps.", "yes it's just two parts that screw in together - works pretty good too! very happy" ]
reviews vary--is this decaf or does it contain caffeine? Thanks!
[ "It is 99% Caffeine Free. For more information you can contact the Caffe d Vita company this is the link to the label. http://www.caffedvita.com/CDV_panels.pdf.", "I keep going back and forth about what 99.7% really means though. When I'm pregnant and not drinking caffeine, it seems to keep me up at night. But I don't notice it at other time. I kind of view it as the equivalent of half-caf maybe. But like I said, I keep going back and forth.", "I only have cans of Amaretto Cappuccino at the moment. My can also says 99% caffeine free. Caffeine doesn't bother me; I hadn't checked that out. I don't read small print easily. I bought some other flavors and turned them into mocha by adding cocoa powder as for more chocolate I have always been satisfied with all their products even if I do take liberties, sometimes adjusting to my own taste.", "It is decaf. It used to say that on the can. That is why I first purchased it. I am VERY sensitive to caffeine and can not eat or drink anything w/caffeine, but I have no problem with this. I love it.", "My cab lists Arabica coffee, it does not say decaf. I never drink decaf. With the mocha combo I do not get jolted with caffeine but nor do I think is decaf, either. I love it occasionally.", "It is 99.7% caffeine free.This is a great product, hot or cold!! I like making mine into a frappe. :-)" ]
DOES IT have a volume button
[ "Yes!! And the lock screen button. They may be a little hard to press but I got used to it so it's not a big deal for me anymore." ]
It does not specify in the text, does this remove flouride? . . . please don't tell me you 'think so'
[ "I would call them ,because in all my reading I found everything except fluoride mentioned" ]
will this unit work while on the charger
[ "yes, you an leave it in the charger and use it. Mom keeps it in the charger beside her recliner and picks it up and uses it as needed. If the phone rings, she can answer it from there. It is more convenient to use once you pick it up but you can leave it in the charger and use it. Since it has two buttons for calling, ours is programmed to call me first. Mom has used it many times and I am very happy with it.", "Hello:I bought two units. I always have one charging when the other runs out. I have not tested the unit in the charger. The battery life is excellent (more than 24 hours). I don't use the unit as the main telephone (answer or call regular everyday life situations - only for an emergency). Every time I want to make or answer a call, I do it from the wireless telephone or the main telephone (Base).Regards;Ino", "Yes, just be sure it is turned on. It will charge whether turned on or off." ]
Will these fit a 2013 Optima LX 2.4L GDI? My measurements vary slightly from everything online. My factory logos measure: Grill 4.5 in, Trunk 5.27 in
[ "They should fit but I would buy elsewhere. These aren't the best quality. I've seen some really good ones that sell for more", "Yes, I have a 2013 optima SX and they are are standard size. These fit perfectly. Love them and definitely a great buy", "Yes I have a 2012 sx and these fit great! However these are more of a stainless steel look vs. Chrome." ]
does it have a lock? what kind of lock?
[ "It does have a lock that uses a key. The lock is balky and you have to wiggle the door to get the security bars to slide in place and wiggle the key in the lock to get the security bars to release. Keeps the guns locked away from children but would not deter a determined assault.", "Yes it has a very good secure locking mechanism that turns with the key. Great product to secure your guns and ammo.", "yes, the unit come with a key lock. not a very good design though, it fell apart a couple weeks after I received and assembled the unit. I use it for supply storage, it's great for that although overpriced for what it ended up doing.", "Good stout keys are provided, that turns a pretty fair mechanism that raises a long metal bar up to the top and one down to the bottom. It's not a bad set up.", "Yes, Locks with a rotating mechanism more or less like a school locker. The key can only be removed from the lock once the door is in the locked position. So it is impossible to lock the keys inside, or close the door without it being locked.", "It has a lock built into the door and it comes with two keys. The lock is what keeps it closed. nice light duty cabinet not super secure but will keep out kids and keep honest people honest. Easy to out together just takes time around an hour at most." ]
Whenever i use my old camcorder for playing videos the screen starts to jump. Will using this fix the problem?
[ "No, in my case, I use this 8mm head cleaner to clean the head player and pinch roller that way pictures or videos on tapes will be clearer.", "Yes it may clear the problem, but it can be the head which is faulty or tracking is faulty.", "Well...not really in my case. It worked perfectly cleaning the head.. so I can see my videos tapes very clear." ]
is this mug made in america? thanks
[ "mine doesn't say and the sticker is 3/4 of the way gone but I seriously doubt it.....sorry i couldn't be of more help.", "The box is long gone, and there is no marking in the mug. THis would make me think it is, as imports are supposed to be labeled, but.....", "I wish I could tell you it was made in the good ol' US of A, but it is unfortunately made in...dun,dun,dun...CHINA. Sorry. Good luck in finding something domestic." ]
Can the audio out be plugged directly into a speaker since monitors have no audio and does the speaker have to be powered?
[ "you have to plug it to a stereo receiver, you will have to power your mic too.I plug my mic into an old tape deck then to the us411zs d1. Set the tape deck to record." ]
Will a Corsair Hydro Series H105 Extreme Performance Liquid CPU Cooler work in this?
[ "If it's a stock system yes if it's a aftermarket system you might have to re arrange it. Personally I go air cooling but yes the liquid cooling holes are on the case! Your welcome!!", "The case has plenty of room for most anything needed to fit. Should be no problem." ]
Is this made in the usa or china?
[ "Near the top of the product details it says Made in USA. 5 lines lower it says Made in China." ]
Can the bed be assebled with the stairs on either side?
[ "Good Morning Megan - Yes - the stairs come with instructions to swap it out to the other side:)Thank you for allowing me to assist you - from the #1 Discovery World Furniture seller on Amazon - Dreamscape Furniture:) Feel free to call me at 8007719330 if you need further assistance. Scott" ]
Would this reach high enough for a 9'ceiling install?
[ "Yes, it goes to 11'. It is better to have 1 other person to help but I did it by myself and this was the first time I hung sheetrock. Once I was done with my room I sold it on Craigslist to someone putting a plywood ceiling in their garage. They sold it once they were done. Hope this helps." ]
kid kraft compatible?
[ "Yes, it's compatible with any train table or tracks. I bought the Step2 canyon train table for my 3 year old and also purchased the maxim trains to go with it and they ride and fit perfectly on the tracks. The trains are a great buy, well constructed, and high quality." ]
Does this crystal have lead in it or is it lead-free?
[ "It is lead crystal. Lead is used to be able to cut the designs in cystal. If it was smooth glass it would likely be lead free.", "I have to believe that this is leaded crystal, and should therefore not be used to store whiskey for extended periods. There is no documentation in the box, but numerous other sites list this decanter as being 24% leaded crystal. Even the seller below, Chestnut Gifts, lists it as being leaded crystal on their website (why they are doggedly claiming it is lead-free is therefore baffling to me). Additionally, the glasses that are part of the same set came with stickers stating they were lead crystal.", "When I bought this decanter it did state that it is made of 'lead crystal'. There was no accompanying literature in the package; however I sincerely doubt that any 'lead' would leach our of the crystal and taint the whisky or taint it's flavor.I think it it a fine piece." ]
Can these be left outside day & night, regardless of the weather?
[ "Yes! They were built to be weatherproof. Mine sit outside all the time and they are still going", "I had mine in a hanging ornament outside for 6 months, so not in direct contact with elements, but outside non-the-less." ]
TH-42PX75U Is it wall mountable? I just got the Panasonic Th-42PX75U. I would like to mount it to the wall. I was looking in the book, and some sites, but really can not find out if I can use a universal wall mount. Don't really see any screw holes that would mount vesa? or Universally? I know Panasonic sells one specifically for it, but prefer a different one and less expensiveAppreciate any input? thanks Bruce TH-42PX75U Is it wall mountable? I just got the Panasonic Th-42PX75U. I would like to mount it to the wall. I was looking in the book, and some sites, but really can not find out if I can use a... » Read More TH-42PX75U Is it wall mountable? I just got the Panasonic Th-42PX75U. I would like to mount it to the wall. I was looking in the book, and some sites, but really can not find out if I can use a universal wall mount. Don't really see any screw holes that would mount vesa? or Universally? I know Panasonic sells one specifically for it, but prefer a different one and less expensiveAppreciate any input? thanks Bruce « Show Less
[ "Yes it is wall mountable. PDP is heavy so make sure the wall is up for supporting this.", "NO, probably because ALL large plasma TV's are heavier than same size LCD-TV'sJust find a helpful person in the hardware division at Home Deport, Lowes, etc. to help you design a proper shelf to use on a properly constructed wall!" ]
How many lbs of candy (m&ms) would it take to fill 24 bottles?
[ "It takes roughly 3.5oz to fill each bottle so like 84-ish oz for all 24 bottles.", "I would say probably about 4 lbs. I used the 7 oz bags of M&Ms; and I don't remember the exact number of bags I bought but I think it may have been around 6 or 7. I would do 5 lbs to be on the safe side." ]
Will it fog up your glasses?
[ "I wear safety glasses and eye glasses and yes they both fog that is the issue I am having with the product other then that it works well", "Yes use antifog spray on them stops it.but keeps head and face warm in icy wet snowy cold weather.", "I don't wear glasses so I don't know. However, today was a very cold day with a bit of a wind. It gets a bit hard inhaling since there's no opening for the nose." ]
so this will connect to my front panel usb 3.0 to my motherboard 2.0 slot and it will work right?
[ "Yes! that is exactly what I did, but you will only get USB 2.0 speeds I haven't had any problems with mine.", "Yep that is exactly why I bought it. Case has a 3.0 connector (wider one pictured) but my board has a 2.0 header (smaller one).", "Yes that is correct. Be aware though that for some reason it may make your connection a little finicky dependent upon the device. For example USB drives may get weird errors, but a game pad controller will work fine. I am uncertain as to why that is." ]
Will these fit on both front and the rear?
[ "these only fit the back on a ford ranger & Mazda B-4000 the front's have a stud style fastener on top." ]
Does it support cable modem
[ "Sorry but I''m not really sure. I used it connected thru a magic jack. Your need something to convert the phone signal to voip is my guess.", "Cable Modem would work through the cable and the Ethernet port on the PC. Don't think they would have any interaction", "No. It is a dial up modem for transfer of small data files between computers.....very, very slow data rate. Would not support any video. Its top speed is 56,000 bytes, where a broadband is 8,000,000,000 to 20,000,000,000 bytes" ]
I'm looking for a compact iron for my sewing (pressing seams and whatnot). Does anyone use this for that purpose and does it work well? TIA!
[ "That's exactly what I use it for! It's especially handy for small blocks for quilting.", "I must say it is a nice little iron. It has a very long cable which is very helpful for ease of use.It is steam which is always great for seams and more. The only thing I would say is the nose is pointed yet not as much as one of those mini clover irons. otherwise I do recommend it, if your seams are 1/4 of an inch you may need a smaller point. I hope this helps. kind wishes lily", "This works great. The water seems to drip out quickly, but the iron gets very hot and works very well. Takes a long time to cool so be careful packing up from a quilting outing.", "I must say it is a nice little iron. It has a very long cable which is very helpful for ease of use. It is steam which is always great for seams and more. The only thing I would say is the nose is pointed yet not as much as one of those mini clover irons. otherwise I do recommend it, if your seams are 1/4 of an inch you may need a smaller point. I hope this helps. kind wishes lily", "I'm sorry, I haven't used it. I bought it for travel and I've been sick = have cancer. I am getting better so maybe soon. Linda" ]
How long is the USB cable from stand - that I will attach to my computer, my computer is under my desk and I am not sure if Cable(s) will reach.
[ "It's a little over 3 feet long. Should be plenty to reach from the floor to the monitor stand.", "About 3ft I would judge. Should reach if you have direct access and do not have to go around. Nothing special about the cable anyway.", "I bought it as a gift. I don't know that the cables were included. But their PC is on the floor below the desk so 6' should be long enough.", "It is three feet. I have my computer under my desk as well and it did not reach. I had to use a USB extender to plug it in.", "It is about 3 and a half feet long. However, it is a plain, standard USB cable, male on both ends, so that if you need a longer cable they are cheap and easy to find." ]
Where can I get the list of 750 projects that can be done using this product?
[ "From the Elenco.com website. You'll need to view the manuals for the SC100, 300, 500 and 750. One takes off where the previous one leaves off.", "The projects are in booklets that are contained within the product. If the booklets get lost I am not sure. I would try the manufacturer's website." ]
Is this external mic capable
[ "Yes. It does a good job of picking up sound. However, I mainly use this camera for golf swing videos so I can't say I've really a ratified the audio quality.", "Yes it is, I shoot diy tutorial videos with this camera on a stand and it works so well. I was very impressed with the clarity of the videos I've taken with this camcorder as well" ]
There doesn't seem to be a nutrition panel on the label. How many cals, grams of sugar, carbs, protein does this have??
[ "Hi everyone, This is Jeff from Integrated Sports Nutrition. We formulated and produce Red Leaf Pre-Workout Energizer. The supplement facts panels for dietary supplements are a little different than for regular food products. Sorry for any confusion. There is 0 grams sugar and 0 carbs. To be super precise, there is a trace amount of carbs from the natural lime flavoring, but it rounds down to 0 (per FDA labeling guidelines). The sweetness comes from the combo of natural flavoring and the sweetener - which is sucralose. Sucralose is the same thing as Splenda (the yellow packets you see at Starbucks). But we use very little of that, less than the equivalent of 1/5 a pack of Splenda. It's the combo of these various ingredients that makes the product taste sweet - even though it has 0 sugar. It was a painstaking flavoring process that took over 1 year to get right. It's because anything with any green tea or caffeine in it is nasty. So covering that up without using a ton of flavoring and sweetener is a bear. But we did it, using a very minimal amount of flavoring and sucralose. Hope you like it. Feel free to email me at jeff@isnlabs.com with any questions at all. Best regards, Jeff ISN", "I dont really have that information in front of me, if you email the seller though they will let you know. I did that once and they got back to me pretty quickly", "I was wondering the same thing... I always make an effort to take in as littl sugar as possible and this product is very sweet tasting. I loved it but i didnt buy it again because it is a mystery as to how much sugar i am consuming.... i even looked online and at the website; found ZERO info." ]
Freezing Meat first? Is it really necessary to freeze meat first (before vacuuming) such as New York, Porterhouse, Rib Eye steaks?
[ "If the meat is very juicy, freezing it or wrapping it in plastic wrap is a good idea. With the new models you can stop the vaccum cycle and seal it if it is getting messy. What you don't want to do is suck any liquids into the machine. This will kill the motor. Hey, it isn't too onerous a task to put your meats onto a baking sheet and pop them in the freezer for a few hours first and it is worth it to preserve all of the juices and the lifetime of your machine. These things ain't cheap!" ]
I have a secondhand Flavorstation. Is there any way to tell which model I have before purchasing this? Thanks!
[ "The 110 has a green 'bayonet\" that allows you to just clamp in the co2 tank....Does yours have that?", "The FS-100 has one gray and one red button on the top of the unit. The FS-110 has two gray buttons on top of the unit." ]
My Irwin lazer light is no longer working? Do I need to replace? This looks like what I have on a Pro-Tech 10" compound miter saw. Will this work?
[ "didn't last long for me. however i am on my third one now. what i find is the corrosion of the spring contact that is the problem for me. now when i get a new one, the first thing i do is get some battery connection grease from the auto supply store for about a dollar and put it on the springs before i use it. stops the corrosion." ]
Are these hard wired or is the power source coming from the cigarette lighter?
[ "Cigarette lighter. Also, FYI these aren't really pink- they are much more purple. I have had them only a few months and am already having issues with wiring. Hope this helps!", "Idk yet I cant find nobody to install them I guess this isn't the right kind thats usually put on cars this is a cheaper version" ]
For canon sx30 IS wich size is recomended
[ "The front of your current lens will have a number such as 52 mm or it could be 62mm or any other number; however, just look around the ring of the lens. I have several different sizes to accommodate each camera lens I have. You will be doing your lens a great favor - you may pay $20 for the lens cover, but just think...a new lens is $200 and higher.", "I could not find the filter size in any of the Canon documentation. On a forum I read it is a bayonet mount, which means you need a converter to fit filters.The converter I found - which support my initial idea it has not filter thread, but bayonet: Filter Adapter FA-DC67A (Compatible with Canon 67mm Filters: Circular Polarizing PL-C B, Protect Filter).So with this bayonet-to-filter adapter you can use 67 mm filters. The adapter costs 22 USD at Adorama; 26.50 USD on Amazon, but you can buy a fake one of Bower:Lens Tube Adapter 67mm for Canon PowerShot SX520 HS SX60 HS SX50 HS SX40 HS SX30 IS SX20 IS SX10 IS SX1 ISI would go for the Bower and then add a nice 67 mm UV and a 67 mm polarizing filter (if you like punchy blue skies). I could not find the filter size in any of the Canon documentation. On a forum I read it is a bayonet mount, which means you need a converter to fit filters.The converter I found - which support my initial idea it has not filter thread, but bayonet: Filter Adapter FA-DC67A (Compatible with Canon 67mm Filters: Circular Polarizing PL-C B, Protect Filter).So with this bayonet-to-filter adapter you can use 67 mm filters. The adapter costs 22 USD at Adorama; 26.50 USD on Amazon, but you can buy a fake one of Bower:Lens... » Read More I could not find the filter size in any of the Canon documentation. On a forum I read it is a bayonet mount, which means you need a converter to fit filters.The converter I found - which support my initial idea it has not filter thread, but bayonet: Filter Adapter FA-DC67A (Compatible with Canon 67mm Filters: Circular Polarizing PL-C B, Protect Filter).So with this bayonet-to-filter adapter you can use 67 mm filters. The adapter costs 22 USD at Adorama; 26.50 USD on Amazon, but you can buy a fake one of Bower:Lens Tube Adapter 67mm for Canon PowerShot SX520 HS SX60 HS SX50 HS SX40 HS SX30 IS SX20 IS SX10 IS SX1 ISI would go for the Bower and then add a nice 67 mm UV and a 67 mm polarizing filter (if you like punchy blue skies). « Show Less", "I could not find the filter size in any of the Canon documentation. On a forum I read it is a bayonet mount, which means you need a converter to fit filters. The converter I found - which support my initial idea it has not filter thread, but bayonet: Filter Adapter FA-DC67A (Compatible with Canon 67mm Filters: Circular Polarizing PL-C B, Protect Filter). So with this bayonet-to-filter adapter you can use 67 mm filters. The adapter costs 22 USD at Adorama; 26.50 USD on Amazon, but you can buy a fake one of Bower: http://www.amazon.com/Bower-FA-DC67A-Adapter-PowerShot-Digital/dp/B0057G2TH4/ I would go for the Bower and then add a nice 67 mm UV and a 67 mm polarizing filter (if you like punchy blue skies)." ]
are the trucks siliver or blue and white because theres diffrent reviews good and bad im confused it should be only one borad right?
[ "The truck is silver and the wheels are blue and white. Excellent skate, the best" ]
Is this product made in the USA or imported?
[ "My durafast Elite full suit is made in the USA but my bikini is made in China.", "I queried TYR and learned that this particular style of suit is made in China. Some styles by TYR are made in the US." ]
Can you use it on a plane?
[ "No. This device uses WiMax on a high frequency band that will not work properly on a plane.", "No. When plane departs the gate - you will be asked to turn all gadgets off. When plane will gain some altitude - you will be allowed to switch on only non-transmitting devices. Clear Spot is a transmitting device and not allowed to switch on. Even if you will try to switch it on - it won't be able to get the signal." ]
Will the rpw118 (beta58a) cartridge work as replacement for rpw110 (pg58) cartridge in this system?
[ "I honestly don't know, when I matched up the microphone to a system I just brought the entire mic and the same exact model. I personally like to keep parts authentic for best results." ]
Mac OSX compatibility: Also, can I download the videos directly from the camera to the Mac?
[ "I have an intel based mac and the hg10 cam. I was unsure weather the cam would work when I bought it. Best buy said it would and told me if it didn't I could bring it back if it didn't. It does work with Imovie8 but DOES NOT work with previous versions of imovie. You must have or purchase Ilife 08 to make the HG10 work with Imovie. I put a first test movie up on utube with the cam and software and it worked perfect. http://www.youtube.com/watch?v=bXeFjOfewiI" ]
Whenever I plug in the RED side to my amplifier, the sound is near dead quiet, why does this happen?
[ "Serge, are you sure you are connecting the stereo side of your cable to a stereo system or instrument? If it is connected to a monaural device, the red lead may be short-circuited and your amp may be at risk!" ]
What is the size of the whole drip tray? what is the size of the drip section section on the bottom drip tray?
[ "The whole tray is about the size of the sink. The drainer fits inside the drip tray. I love mine I would recommend it to a friend", "Hi, so the size of the the drip section on the bottom is about 12in x 17in, it's also about the size of the whole drip tray because the tray fits right in the drip section on the bottom. I hope this helps." ]
can these seed be started indoors, then transplanted?
[ "Yes it does well but you will have to nick the seed for faster germination. Then transplant outdoors in 2-3 monthsCheck online for seed nicking methods,", "I have a few of the seeds in some growing medium and certainly hope they will sprout. I have had luck doing this with other hibiscus seeds.", "Yes it does well but you will have to nick the seed for faster germination. Then transplant outdoors in 2-3 months Check online for seed nicking methods," ]
Is the RK300 compatible with a Samsung galaxy S5
[ "To answer it as asked, I don't know. I do know that it works with my Samsung Note 3 and will assume will work with others. From my understanding it is compatible across the board with current Bluetooth devices. I have no info that it will not. Hope this helps. Tim", "Should be ,,, works with the s-3Should work with any Bluetooth enabled device" ]
This isn't a question but did anyone else notice there are ZERO tech details? Find out what the Note 3 needs. I won't buy based on lack of info alone.
[ "I bought this item and works fine with the Note 3. Awesome value for price." ]
Asus O! Play or the WD TV Live? Aside from native youtube and pandora support in the WD TV Live, what are the differences between these two devices?Which would your recommend?
[ "main difference:WD TV LIVE: supports WIFI USB dongle (see details at my review on the WDTV Live page). No FLV, RMVB, DVD .IFO/chaptersASUS: no wireless (could change with firmware), plays FLV, RMVB, .IFO. No Pandora, no YouTube.The ASUS is also a bit of an eye-sore.", "Y. Fang, if you go on to Asus' site and download the firmware update from there, the file comes with a \"how to update\" pdf guide.", "My O!play comes with version 1.7. how can i update to the latest firmware? Please...." ]
do these have an inline on off switch? And, is there one wire or two leading to the headset?
[ "Yes. Inline on/off for the mic. Entire cable is removable from the headset. The dual option can be connected or the USB, or simply the auxilary. USB seems to have the best connection. Overall, all connection options are available and interchangeable. via connection from mini USB.", "They have an inline Mute swtich, with volume control. There is only one wire leading to the headset." ]
Does it come win 8 or win 8 pro? And either way, is it up gradable to win 8.1 -- Free?
[ "win 8 not pro and does upgrade to 8.1 free. You have to do updates to win 8 before it can do the upgrade to 8.1" ]
What diameter are the un-tapped holes? Will a 3/8" bolt pass through the un-tapped holes?
[ "An 11/32 drill bit just clears it. My Harbor Freight digital caliper shows 0.3565 inches. Quit delaying and just buy them. I am totally happy with mine." ]
Does this set come with a remote controller?
[ "This set comes with a wired in remote dial which controls the speed of the train. It's a wonderful set. It also blows steam out of smokestack. There is also a railroad crossing that raises and lowers as the train goes through that can be purchased separately. I purchased this train set to go around the Christmas tree and my boy still plays with it." ]
How many amps/miliamps does this use?
[ "About 1.8-2.2 amps @ 12V 600 gph pump. The bigger questions is for how long? Mine lasted a whopping 30 days before burning out. I would recommend a Rule or Attwood pump instead. I have some 17 year old 2000gph Rules that work just peachy and I use an Attwood Auto 800 in my shower sump which gets used almost daily. The Attwood can be cleaned easier in hair/fouling applications.", "The current draw varies based on the lift or head height you wish to pump the water up to. It is supposed to be a 25 watt pump, drawing 2-2.5 amps. Hope this helps...", "This unit takes 3amp @ 12 volts. This unit will not work well with solar unless you use a high out put battery." ]
Whats the range on this R/C vehicle?
[ "My driveway is the length of a football field and it can be contolled from one end to the other. Never tried any further." ]
What is the length of the shaft and does it have a flat side?
[ "There is a flat side to the fan shaft for tightening the fan blades down. The length is approximately 2 3/4\". It is very difficult to measure the length due to the fan already being installed.", "Shaft length 2-1/2 \" long from the motor case. Shaft diameter is 1/2\" . The flat is on one side and starts from the shaft end or shaft top and is 1-1/16\" in length and is approx. 9/32\" wide. This motor is a replacement for Ventamatic attic fans." ]
will this work with porcelain floor tiles?
[ "I think so. GO TO YOUTUBE and watch the how to video. I think that will help you out. Good Luck", "Patricia, Thank you for the question. The answer is Yes it will work. The idea of the filler is to fill scratches and then you can level the repair and seal and polish to the desired shine. The wax will feel hard on the porcelain, but after you level the repair, you will be in good shape. Color is the priority, so please take your time to blend the colors to get exactly where you want to be. You can view a video on repairs on YouTube as well. Thank you - Konig", "It worked excellent with Porcelain Tile Floor. I have pics but can't figure out how to post them.", "It works with Ceramic Tiles. I assume it will work with porcelain. Make sure you select the correct color option. I was able to make a very good repair ti the chip but the color match was a little off. All in all I am happy with the result because the repair is very strong." ]
set up router with chromebook
[ "it works with chromebook, my son has one, but my router only worked well for a week, don't know why" ]
Has anyone had any issues with fleas, when allowing their cats to be outdoors in the funhouse?
[ "No we haven't had issues with fleas. I suppose it's possible that they could get them but we have never seen any on our cat.", "No I havn't..... but I treat my kitty around June every year... and I run a flea comb through him every once in a while... and I don't seem to have any issues.... and he really enjoys the funhouse...", "I have not personally had an issue with fleas after using the 'funhouse' outside. However, we always treat for fleas in the warmer months, because the chance that a cat will pick up fleas outside is always a probability.", "Fleas need a host. They don't just live in the grass. They also don't have wings. So whether your cat is in the funhouse or not, they would need to be in close prolonged contact with a host animal, in order to contract fleas. It's possible your cats could contract some other parasite such as heart worm which comes from mosquitos. But even that seems extremely unlikely. The mosquitos would have to work their way through the mesh and then through the cats fur to bite the cat's skin. Most likely the mosquito could find an easier target." ]
Will these legs fit an IKEA Besta TV unit?
[ "I am looking for new legs on my Ikea Skogaby chair. From what I have gathered, the Ikea chairs/sofas use an M8 hanger bolt not the standard 5/16 for American furniture. You can change out the hanger bolt on the leg or you can install an adapter plate on the bottom of the chair/sofa." ]
Printing on a couple onesies, is it better to wash them first? Or use a brand new onesie?
[ "wash them first or you can use brand new onesies don't matter it is what you prefer, but when you was them after transfer is on you have to wash in cold water, make sure the onesies are 100% cotton" ]
For the Samsung ML-2165W, is a new reset chip required every time you refill the cartridge? Also, is an upgraded/downgraded firmware required?
[ "A new reset chip is required every time you refill the toner so that your computer knows that it has been refilled. No firmware change was necessary.", "the chip in the kit I got did not work. I put the old one in and live with the messages I get showing low toner level. Printer works fine.", "I don't have an answer as to reset chip... I just followed all the instructions and used what came in the pkg. It all worked perfectly and would use again.", "A reset chip is required for each refill. No upgraded/downgraded firmware was required. I have never upgraded my firmware since purchasing the printer 2 years ago and the kit worked fine. Just don't try to put all of the toner in or you may ovrrfill the cartridge and make a mess. I suggest stopping after 3/4's of the supplied toner has been loaded into the cartridge." ]
what size are the towels
[ "I noticed they shrink a little bit after their first wash but then they stay consistent. I just measured one of mine and it is 23\" x 14\".", "Item measures approximately 15-inches by 26-inches for each individual full-sized towels.", "I measured 22 1/2\" by 15\". Now that's after they've been washed a couple of times. I didn't notice any shrinkage though. I like them better than most store bought towels and I use a lot of dish towels during the day." ]
Where can the stylus be stored? I can't tell in the pictures.
[ "If you look at the top of the picture there looks like a little tab of spandex/stretchy material. It is a little loop, and you slide the stylus in there. The stylus fits in it securely and I have never had it come loose.", "On the very top there is a stretchy holder that keeps it there and does not allow it to fall out.", "there's a stretchy loop at the top that holds the stylus. I bought a stylus and that's where I hook mine into. Not sure all stylus' have a clip (like a pen) but I'd recommend that type to go along with this product.", "At the top of the case their is a elastic extension that holds it in place....so farI haven't had any problems", "There is a small black tab along the side. You can see it in photo as a little part that sticks out" ]
What scraper attachment fits this model? I would love to get the flexable beater/scraper.
[ "I was able to get the attachment that had rubber along the edges to help remove cooking items off the sides of the bowls we were able to get New Metro Design Beater Blade for 5-Quart KitchenAid Bowl Lift Mixers love it sure keeps the noise down" ]
Does it attract lint in the dryer?
[ "it didn't when i washed it. i washed it alone. when i dried it it filled the filter with \"stuff\" from the blanket.", "I have only washed the blanket once since I bought it. There was some lint in the lint basket after I dried the blanket." ]
Will this fit my Futura model 925 Singer machine?
[ "It fits my Singer One. You may want to give Singer a call and see what they say. If your Singer has a low shank, it should. I am sorry I am not more familiar with the 925 model." ]
Is it returnable if it does not work and how long is the warrenty???
[ "I couldn't find anything about a warranty for this item. I wouldn't even get anyone to answer my questions. I did go to Walgreens and I purchased an OMRON that is on sale which is more compact and works just as well and comes with a one year warranty." ]
Can someone tell me what the two plastic bits are that screw into the rod? The brush is obvious but what are the other two plastic pieces?
[ "One is a slotted tip to hold the cloth patches and the pointed one is for putting behind a patch and pushing through the bore, shotgun style.", "The one with the slot is to hold the cloth patches used to clear or lubricate. Do not know what the small solid plug is for." ]
i have an hdmi on my new tv but home theater has 3 rca will it work on the home theater
[ "It's designed to take input from HDMI and convert it to RCA, not the other way around. If you're trying to take RCA inputted from the home theater and convert it to HDMI to display on the TV I don't think this will work." ]
How are the pictures in low light?
[ "The camera works well in just about any light. It has many settings and features that help with this. We actually have 2 of them now, the oldest being 2 years old. They both have been trouble free and take great pictures. We did, however, take a photography class to help us learn how to use the options and and get great photos. I hope this helps.", "My experience with this camera was that image quality was poor all around. Not sure if I received a defective model or what, but I returned it.", "The pics in low light are excellent....and the built-in flash, should you care to use it, is compensating!", "After proper setting they are good. However, flash of my camera broke and this is the most common problem with this camera. Google it. The problem was with main board of camera and panasonic customer support was not helpful at all. However, sticking to your question - you need to play with aperture and shutter - it can take good pictures without flash in low light." ]
Will this work with an electric leather branding iron? What temperature is needed?
[ "I've used it at around 350 degrees on leather belts. It works great but you need to make sure to use tracing paper for your design because the foil will melt at high temps on direct contact" ]
Are these compatible for use with chalk pens or just regular chalk?
[ "They're too small to use regular chalk. I used a silver metallic pen but can't reuse them. You'll definitely need a fine point pen.", "I used them as name tags for a luncheon with 60 women. I used a chalk pencil (they are great) did try the chalk pens but it left a slight shadow of the writing even using the liquid cleaner." ]
What is the resolution of this laptop? Is it really a 17 inch with 1366x768 or 1600 x 900? Thank you.
[ "Yes it actually is but it isn't as crisp as the one I am using. I tried several setting to see if I could make it better to no avail. I am not saying it is bad and maybe I wouldn't have noticed it if it weren't for the fact mine was on beside it and I could compare the two. It is clear and has nice colors but it isn't as bright as my own was. Would I buy it again? Probably not because I know what I want and like. My sister loves it and says nothing but good things about it. Loves the speed and even likes Windows 8. Maybe it was just me I don't know." ]
Have a USGI Quick Release Pistol Belt (2.25 in) - will this work as the inner belt system for this particular battle belt? Thank You. JD590
[ "I believe it will fit, but it will be a tight fit to fit through the loops inside the battle belt.", "I believe it will.....I have a 2¼ inch on mine and work just fine....a little hard to get the buckle tru the loops...but works great...my battle belt is small and the inner belt is a large with just a little left over so just watch out for that... Depending on the size you are getting try to go 2 sizes bigger ( just in case).", "I believe it will.....I have a 2 inch on mine and work just fine....a little hard to get the buckle tru the loops...but works great...my battle belt is small and the inner belt is a large with just a little left over so just watch out for that... Depending on the size you are getting try to go 2 sizes bigger ( just in case)." ]
Does it have cover or a plug to drain the water?
[ "No it doesn't have either. But it is light so I just dump mine everytime we use it and put in garage.", "Item should really only be used as a water table as there is no cover to protect sand. Also, there is no drain but easily emptied by just tippping it over onto lawn (when filled with water only, no sand of course).", "it does not. It's very lightweight so I just pick it up to tip the water out, but a plug would be a great addition!!", "Neither. However, since it is so small and lightweight, its easy to empty and store." ]
I need it for bike shifters. I saw on utube them spraying in small area with a spray tube which was not included. Any ideas?
[ "You don't need a spray tube at all. If it gets on anything more then you intended it wipes off easily. It is the best stuff ever!", "If I remember correctly, a spray tube should be included. But if you have an old can of WD-40, or some other spray (something), then you can probably use the spray tube from that. If you don't have one of those, maybe you could borrow from a friend who does have WD-40 (I think MANY people have that).", "Spray tube from WD 40 or any spray lube, like silicone or such. Also, a stir stick like they have a Starbucks might be the right size. I haven't checked." ]
All I can see from the picture is the flashlight is the green laser on the bottom or a seperate device? Thanks in advance for your help.
[ "You must remove Light and replace w laser head...bad design and easy to lose which ever you arent using", "The flashlight head removes and is replaced with the green laser head. It's one or the other.", "The flashlight end screws off and you screw on the laser end batteries are cheap and for the price not a bad set up" ]
We tried another conversion product and the bed is very wobbly. How does this product compare to the original sturdiness of the full size bed?
[ "It's not wobbly at all. And also the noises and squeakiness of the original wood full size bed are gone. The queen is now very sturdy. I was originally told to purchase an extra center support which I did not do. And it seems that it is not needed. I'm super happy with the conversion and love my Queen size bed. It still sits higher than the full and the headboard is hidden a little but it doesn't really matter. I am happy.", "We just bought the conversion set for our guest room bed and haven't had anyone sleep there yet. But it doesn't seem wobbly at all from a quick try. Great customer service. One rail was welded together incorrectly, and after one call, an entire new set was shipped quickly with no request to return the first set. (we did email a photo of the improperly made rail).", "My experience has been excellent! They are very service oriented and take the extra step with the product. Went together exactly as instructions said. Solid piece and bed does not shake.", "The rails seem to work fine. No wobblying. My bed was so low that I couldn't use the crossbrace with the feet so we just put a board between the rails to support the center of the box spring.", "I had to install shims and other boards to make it less wobbly. I works now but out of he box it didn't. I almost sent it back but there isn't a lot of options in conversion rails. It ended up working but I got creative.", "I haven't had any problems with it. It seems sturdy and has worked well after having it a couple of months" ]
Are these matts designed to fit the 2014 unlimited model?
[ "like the originals! love them they fit perfect! bought rear tailgate one too. I just got them for my new jeep 2014 ." ]