dialogue_prob float32 0 1 | forum_prob float32 0 1 | text stringlengths 8 4.31k |
|---|---|---|
0.003336 | 0.996094 | Yeah it's a few Torx Bolts from what I've seen online but I just told the dealership to take it off when I bought the truck I also went ahead and put a leveling kit in it to take away from the natural rake of the truck. |
0.003336 | 0.996094 | Yeah I'll have to check it all out, I'm fine with the whole intake side of things, as I said I've already got a pod, cowl and a few other things in the car, all that needs to happen now is to replace the stock afm and figure out a way to get the 'cold air' intake away from the exhaust, even a couple of degrees lower wi... |
0.003336 | 0.996094 | With that being said, I will try this out tonight when I get home from work and update this thread on the results. |
0.003336 | 0.996094 | Very nice, I have the miniDSP Flex on my radar, and would probably get the Dirac license for it. |
0.003336 | 0.996094 | This info is great, I'll obviously have a very careful look over the levers when they arrive, if u do fit them all moving parts would be greased. |
0.003336 | 0.996094 | This Glow is really ticking all the boxes tor me, especially since I bought an extra battery and a dual charger, so as long as I'm able to charge, I always got at least one battery ready. |
0.003336 | 0.996094 | There has been one single coil RDA I've been eyeing, if I'm able to get a hold of it I'll definitely keep you updated! |
0.003336 | 0.996094 | The fuse I put in seems OK and haven't blown out yet so I'm planning on driving it a bit locally and see what happens with a second backup fuse lol. |
0.003336 | 0.996094 | That was my plan and I think it fits fine without them so I haven't ordered the extra clip and hardware but they told me if I did they would give me a code for free shipping which is pretty cool lol. |
0.003336 | 0.996094 | That's how I am, I love my trex stuff and think that it's the best holster I've ever used but I do wanna try one of mikes with the single clip. |
0.003336 | 0.996094 | Thanks, I found the snapshot thread right after I posted, lots of nice stuff in this release. |
0.003336 | 0.996094 | Thanks for the heads up, I definitely need to switch from the strips on my next tank. |
0.003336 | 0.996094 | Thanks as well for the info, I guess I will try bending it back just so I can ride for a while as I will need to order a proper schrader tube. |
0.003336 | 0.996094 | Tbh from what I feel like if you throw a good set of coil overs and good tires on the UX it might do fine ish in taking some good corners. |
0.003336 | 0.996094 | Sucks, but I'll pull my temp tape off and use kapton then mount them properly in the new chassis. |
0.003336 | 0.996094 | Started using Chrome at work along side FF just to get me used to it so I can transition away. |
0.003336 | 0.996094 | Sorry I know this thread is about a week old, but I've been using my DS Lite to play GBA games lately, so here's mine! |
0.003336 | 0.996094 | Really dig the adjustable airflow but I'm going to hold off on buying anything new until I have some more money, lol. |
0.003336 | 0.996094 | Only time I swipe loot before a rez is when I'm super low on hp with no shield I'll swap my shield and if I'm out of ammo I'll quickly get some and reload, then pick you up. |
0.003336 | 0.996094 | Oh shit, wish i had known thqt yesterday lol, i both cars stripped down to just metal, wires, and the heater and vent cluster, even pulled the steering wheels lol but thank you for this, your awesome. |
0.003336 | 0.996094 | My new bike has UST rims, so I'm just waiting on payday so I can get some rim strips and valves so I can make the switch. |
0.003336 | 0.996094 | My bad then I got linked here from another thread, thought u were that dude My point is not in any way trying to call you uninformed. |
0.003336 | 0.996094 | Mines a factory manual and I'm loving it, the donor doesn't need to be so I'm fine with that, I only really need PS line and some trim, headlights etc. |
0.003336 | 0.996094 | Maybe if I get rid of mine I could convince my girl itd be a good use of the space to add another couple racks for some tanks lol. |
0.003336 | 0.996094 | Lol I do that, I'll recommend tanks I've never seen in person, like the Crown tank, just from ECR knowledge. |
0.003336 | 0.996094 | Launchers isnt always good, I couldn't play hyper light drifter on lunch so I open the exe file directly. |
0.003336 | 0.996094 | Just wanted to say thanks to everyone in the last thread I posted with all the helpful info. |
0.003336 | 0.996094 | Just ordered some alignment rods to pick up tomorrow, I think itll definitely help! |
0.003336 | 0.996094 | Just got this on sale, was thinking about refunding cause of the bad resolution, but then I found this thread and thanks to you they're working on a fix, so I'll keep it. |
0.003336 | 0.996094 | Just got mine installed last week at the dealership and now I'm wondering how I drove so long without having CarPlay haha. |
0.003336 | 0.996094 | I was gonna ask what the best mobile tab site is on this sub, maybe this thread will help me with that. |
0.003336 | 0.996094 | I've put ROMs on my phones before so I'm relatively ok with this type of thing but everything I've tried won't let me past the bootscreen or bootloader. |
0.003336 | 0.996094 | I've had some really bad screen protectors so I bought from gearbest. |
0.003336 | 0.996094 | I've got the same battery an efest and an lg, all the batteries work fine on my buddies AR mod so I'm guessing it just has bad voltage drop. |
0.003336 | 0.996094 | I've got my dash cam set up already as well but I definitely appreciate the note about oil changes! |
0.003336 | 0.996094 | I've been stuck in this thread for over an hour trying to figure out what else it could be lol very limited options, surprisingly. |
0.003336 | 0.996094 | I only just realized that this is a new thread too, I just saw the ad and am using it now, seems to work nice and clean, but I came here looking for more info just like everyone else. |
0.003336 | 0.996094 | Interesting, I guess when I plugged mine into the USB port and it instantly started working I must've done something wrong. |
0.003336 | 0.996094 | I MUST APPEASE THE GREAT ONE But yeah, it could get quite bumpy, and I was worried about the drain it would have on the car battery, and I can wait until I get my new room setup to use my computer lol, thanks! |
0.003336 | 0.996094 | I'm starting to think it's just shit optimization because I've got quite a few mods installed and it's running exactly the same as it would on the lowest settings Vanilla. |
0.003336 | 0.996094 | I'm pretty sure my AIO setup at one point broke the first RAM slot on the MOBO by the cables bending it. |
0.003336 | 0.996094 | I'm planning on uploading some to the Nexus, I've got a patch hub in the works. |
0.003336 | 0.996094 | I'm not sure if the BC coilover setup goes into the OEM strut mounts but I'm assuming so? |
0.003336 | 0.996094 | I'm kinda late lol, I had replies disabled for this thread but I still want to comment on this, also for future reference. |
0.003336 | 0.996094 | I'm doing this with mine right now and am using clear fluid, I'll post new pics after I switch out my tubes this weekend. |
0.003336 | 0.996094 | I may try that or yeah paint them potentially or sharpie, right now I'm fine with them just off haha Does your front axle move when you get on the gas? |
0.003336 | 0.996094 | I just hope I don't get addicted to buying earbuds now since I had way too much fun researching all the suggestions in this thread and trying these out, lol! |
0.003336 | 0.996094 | I just got mine a week ago and manually type in the temps to other apps. |
0.003336 | 0.996094 | I guess I should reinstall Chrome and see if ublock starts working again properly. |
0.003336 | 0.996094 | If the switch is doing great I can see them pulling a switch mini w no dock included. |
0.003336 | 0.996094 | I found out that if I unplug my headset from the usb port before going upstair and start my steam link, I don't have any issue. |
0.003336 | 0.996094 | If I'm gonna reload from the rig, I put the current card I'm using on that velcro tab and reload from there. |
0.003336 | 0.996094 | I can't recommend that setup, though it would have been ok with the same bike and CX tires. |
0.003336 | 0.996094 | I believe the only ones with real problems are like mine, they pipe EVERYTHING through the damn IGP. |
0.003336 | 0.996094 | Iam gonna keep this short and sweet, If I was really a troll I wouldn't even decide to use my main account, probably would have spammed this place with memes. |
0.003336 | 0.996094 | I actually just bought mine to get case lube off my fingers but do also use it for after the range to get dirt off to be nicer to my dies. |
0.003336 | 0.996094 | How does it work if I only use MAME and load just the MK roms? |
0.003336 | 0.996094 | Hmmm strange one here, I start off and semi gear up and lose connection, switch server and I'm a fresh spawn, ok? |
0.003336 | 0.996094 | Got lots of awg wire too, but I don't think the main plate has those plug wires you mentioned, when I buy those is there anything else I'll need in order to then just plug the lights into the outlet? |
0.003336 | 0.996094 | Getting some Torx screws may be worth it, I have some on my road bike as they came with the stem. |
0.003336 | 0.996094 | Found out pretty quick that if the single Sprint is in the bottom of your deck, it kind of sucks vs control and you run out of steam. |
0.003336 | 0.996094 | For a while I used Swiftkey X. Now I just use stock because the ICS keyboard rocks. |
0.003336 | 0.996094 | Dude i have never gotten a muzzle or knob from AOs ever and I'm an og like yourself, sonetimes i see people sell muzzles really cheap but I could never get them, u could try your luck at that. |
0.003336 | 0.996094 | Don't get me wrong new Aatrox looks badass, but hes just another overloaded kit. |
0.003336 | 0.996094 | Currently my front rotors are coated OEMs and they look new still while my back brand new ones look like shit after a few months. |
0.003336 | 0.996094 | Build looks awesome, I'm planning on basically the exact same setup, except I'll probably put ssds where the slim fan is above the psu. |
0.003336 | 0.996094 | Awesome thank you so much I have ordered the kit and a modified shell because mines pretty beat up anyway I really appreciate the help! |
0.003336 | 0.996094 | Awesome thanks again I will probably give them a shot, the kkms eat everything I put in em all sorts of reloads and factory from steel to brass just don't like to lock back. |
0.003336 | 0.996094 | Anyways thanks, I'll have to pick up the tool and maybe I'll be lucky and get it to work but I'll also buy another rotor. |
0.003336 | 0.996094 | Anyways I'm sorry about your trigger problem, I sort of have the same issue though so I'm just going to camp in this thread. |
0.003336 | 0.996094 | AMD just approved my request for a boot kit and they are shipping it soon, I was just wondering to if you're bios was already updated. |
0.003336 | 0.996094 | Also I got at least a troll in this sub once trying to convince everyone that I pump AAPL stock before I switch and pump XOM lol. |
0.003323 | 0.996094 | You need a certain rpm for lift and thats what im talking about. |
0.003323 | 0.996094 | You can really see where it gets the name Sparkler but reminds me more of one of those pinwheels they used to sell at firework stands that you nail on a tree lol Im in boring California so we dont get the cool stuff anymore. |
0.003323 | 0.996094 | Yea I'm currently waiting to get some new tools and a table just for my coil building stuff before I order some more wire gauges. |
0.003323 | 0.996094 | Yeah mine definitely lags too, thanks for the feedback I think I will try a flash with one of these custom ROMs and try a fresh start. |
0.003323 | 0.996094 | Yeah, I typically end up cheating a little and basically rubbing both ends that I'm trying to solder together with sandpaper to get the coating off as best I can, then basically dip both wires in a ton of solder so that they have to make a connection somewhere or another. |
0.003323 | 0.996094 | Yeah I like the rubber strap a lot, haven't put on the metal one, the adjustable spring part seems rough like it's catching on something, going to file it and get the tolerances acceptable before I put that on. |
0.003323 | 0.996094 | Yeah I had mine put on at town fair tire and put new TPMS sensor's on the new set and it caused a check light on my dash. |
0.003323 | 0.996094 | Windows got a little wonky on me after the update and the battery can get really hot so I unplug it often. |
0.003323 | 0.996094 | What settings did you change on the CX for the optical out, I think I got mine setup right but I'm no expert on it, just got it this weekend? |
0.003323 | 0.996094 | Very nice look and I wonder what weapon camo did you use with this setup? |
0.003323 | 0.996094 | Update, I got the Logitech MX Master and it is pretty awesome, so I guess I can live without a pinky rest. |
0.003323 | 0.996094 | Thinking I'm just going to strip the chrome out of the OEM ones and install c lights. |
0.003323 | 0.996094 | The way I have it setup, I've done dry runs and logged the temps. |
0.003323 | 0.996094 | The storefronts you can't see it from that picture but in another pic I have it's kinda in the same condition as the first pic I do have a rigged soft wash setup that I'm still trying to work out the kinks with so imma need to get that up and running or I'll be stuck with the pump spraying it all. |
0.003323 | 0.996094 | The shift knobs look amazing, but mine came with the STI shirt throw shifter package, so I might hang on to mine. |
0.003323 | 0.996094 | The glow sticks are only for looks tbh, I'm also going to see how I like the holster and if it bothers me I'll get a mid ride. |
0.003323 | 0.996094 | The few times Ive used it tho I liked it, nothing wrong with it at all a pretty good little device I've thought about VIF forward a couple times and its probably what Ill do with it so someone can get some good use outa it I might just bust it out now, build a little coil for it and fire it up again haha What tank or R... |
0.003323 | 0.996094 | That's the exact setup I want to go with for my JL, same wheels and spacer kit. |
0.003323 | 0.996094 | Thanks for this link, I think I'm going to pick one of those up for my old Jeep that doesn't have a BT deck. |
0.003323 | 0.996094 | Thanks for the info, yeah I'm really into tanto blades just making sure it's worth it when I can pull the trigger on it. |
0.003323 | 0.996094 | Thanks for the info on the IM skimmer I have been debating for a while if I should get one I think I will once i get some fish. |
0.003323 | 0.996094 | So when I found this thread and saw you had posted a link to one left in stock I did not make the same mistake I did before lol. |
0.003323 | 0.996094 | So the ak builder barrel press kit comes with everything I need o r is there a few extra pieces that I am missing and were do you recommend I get them. |
0.003323 | 0.996094 | Sorry I just saw your setup, the frame looks chewed up maybe try a washer under the axle nut. |
0.003323 | 0.996094 | Sorry I had notifications turned off on this thread for some reason so I didn't get the replies until I checked today. |
0.003323 | 0.996094 | Sorry if this had nothing to do with the thread if it's way too off topic, but I just want an opinion, cuz maybe it could expand mine. |
0.003323 | 0.996094 | Seems like something I'd love to try out myself, please let me know how it goes and take pics of the new battery in the case and also where did you move the bluetooth switch etc to? |
0.003323 | 0.996094 | Same here, I don't have that much combos to spam the Daily Pics thread. |