dialogue_prob float32 0 1 | forum_prob float32 0 1 | text stringlengths 8 4.31k |
|---|---|---|
0.00322 | 0.996094 | Thanks for this though, just means I need to put my arse into gear and get on it. |
0.00322 | 0.996094 | Thanks for this, I just ordered a couple extension cables just in case, they are dirt cheap. |
0.00322 | 0.996094 | Thanks for the suggestions, I'll check them out when I'm done checking out some of the other great suggestions in this thread. |
0.00322 | 0.996094 | Thanks for the reply and if I finally get it running I'll post the fix on this forum. |
0.00322 | 0.996094 | Thanks for the pointers I'll try out some washi tape, I noticed it's fancy with the measurements lol it's very easy to sew! |
0.00322 | 0.996094 | Thanks for the info, yes just got the batteries in looks like it has a second set I have to track down. |
0.00322 | 0.996094 | Thanks for the info, is the use of a harley rake good enough, or should I get a tiller as well? |
0.00322 | 0.996094 | Thanks for the info I'm gonna take a look at the battery cycles later and troubleshoot if it runs better when plugged in, etc. |
0.00322 | 0.996094 | Thanks for the info, and sorry for this I'm pretty new with cb's and everything, for running a ground would I just have to get a long wire with the same gauge, and how should I connect it to the frame? |
0.00322 | 0.996094 | Thanks for the info about the WJ drive shaft, that might help me out. |
0.00322 | 0.996094 | Thanks for the hatching power, I got your shiny Tyrunt, sending trade back now! |
0.00322 | 0.996094 | Thanks for letting me know, doesn't sound exactly like what mine does as mine will spin up really loudly either for a minute or so until rebooting or until I hard reset it. |
0.00322 | 0.996094 | Thanks for having me here though I've posted a few threads and everyone here is super nice and helpful! |
0.00322 | 0.996094 | Thanks for giving me a platform for this rant, no matter that this thread is totally getting taken down soon. |
0.00322 | 0.996094 | Thanks everyone in this thread for the info, at least I know what causes the problem now. |
0.00322 | 0.996094 | Thanks, each mini split I had installed at my place have no drain line p trap but it does drain very well regardless. |
0.00322 | 0.996094 | Thanks buddy, I've got loads of the handle things still on sprues because I never use them on tanks lol, glad to finally find a use for them lol. |
0.00322 | 0.996094 | Thanks bro i will try the manual installation of amd drivers, and later check again the core and mem. |
0.00322 | 0.996094 | Thanks, after the responses here I think I will drill more holes but my grow kit did not come with verm and I cant afford to buy any so I'll just have to be diligent about misting. |
0.00322 | 0.996094 | Tbh i didnt noticed a drop in temps but i know it helps my exhaust fans. |
0.00322 | 0.996094 | Switching between Proxmox and various VMs is exactly what I want to do while I'm just kicking the tires until I build my server. |
0.00322 | 0.996094 | Subwoofer you need a unique wire for, it kinda looks like an rca wire. |
0.00322 | 0.996094 | Stuff I would personally remove is like the big yellow segment under the fire button, maybe have a circle frame under the button to show it as a button but that whole going the way down is just needless IMHO. |
0.00322 | 0.996094 | Still working on getting Akbolto, and I'm also building a Rhino XD I'm gonna buy Furax for that. |
0.00322 | 0.996094 | Still nice, u can't do so detailed, tho maybe i need professional gear rather than hubdred of years old thread i found in the attic. |
0.00322 | 0.996094 | SS and Firepack are a very nice combo, I just feel like it only works at certain angles. |
0.00322 | 0.996094 | So yeah I think if I have to mess with the voltage to up the performance it's probably better not to mess with it considering I will probably have a whole new rig built before the year ends. |
0.00322 | 0.996094 | So what your saying is I cant get a phone with a super fish rootkit imbedded within the bios that I cant uninstall? |
0.00322 | 0.996094 | So wait, I posted in the update thread wondering why people are going nuts about the update, and I got downvoted right away and told the game sucks now. |
0.00322 | 0.996094 | Sounds good, just add me as a friend through smite, I play through the launcher, not steam. |
0.00322 | 0.996094 | Sorry to go off topic, but could we maybe see a mod list or a build thread of your ST? |
0.00322 | 0.996094 | Sorry, this is my first time doing a BIOS update what is a bridge ROM? |
0.00322 | 0.996094 | Sorry man, mine did come with the fork I just didn't include it in the pic cause I still have to get my headset installed. |
0.00322 | 0.996094 | Sorry I know this is an old post but what size align tank did you get? |
0.00322 | 0.996094 | Sorry if this question sounds dumb I'm new to the modded FTL stuff but how do I install the update for the mod? |
0.00322 | 0.996094 | Sorry I didn't realize there a lot of threads to this topic aha. |
0.00322 | 0.996094 | Sorry for posting in an old thread, OP, but how did you get the game installed? |
0.00322 | 0.996094 | Sorry for piggy backing onto this thread OP, I am not very good at balancing cards but I like all options this one provides! |
0.00322 | 0.996094 | Sorry for barging into your thread, if anybody has tips I hope they PM me. |
0.00322 | 0.996094 | Sorry about that, but luckily someone already found a forum thread with pics! |
0.00322 | 0.996094 | So just for future reference, since I'm probably gonna buy some new coils tonight to see the difference, what would you recommend in terms for some pre made coils. |
0.00322 | 0.996094 | So i just got one of these g pens and it uses the hooka gel and a friend of mine is going to give me some sort of herb oil attachment do any of you guys know what im taking about? |
0.00322 | 0.996094 | So if I got the new JK's which ARE titanium, you think I could run it all no problem if I drilled the biggest hole? |
0.00322 | 0.996094 | So from what you guys are saying CEX will give me the BD Rom emu and BD mirror options? |
0.00322 | 0.996094 | So far as I can tell, my USB C port on the case won't work with my current mobo header? |
0.00322 | 0.996094 | So are you saying i shouldnt manual oc and its better for me to enable pbo but will it overfeed my cpu with voltage? |
0.00322 | 0.996094 | Since the thread's a month old, I'll reply it over PM when I get done with work today. |
0.00322 | 0.996094 | Since my TurboTax account doesnt update at all and I have no way to know for sure if I will get a refund or not and how much it will be. |
0.00322 | 0.996094 | Since it's been solved and OP is posting there, I'll lock this thread. |
0.00322 | 0.996094 | Since I posted this just before this new thread came up I'm gonna repost it here. |
0.00322 | 0.996094 | Since I don't see one there, I'm gonna say it uses a MAP sensor instead. |
0.00322 | 0.996094 | Since attempting all them things I said, I did a re install and haven't touched it since, been tethering from my phone haha, will try your fix now, thanks. |
0.00322 | 0.996094 | Should keep me plenty happy till I toss the turbos on it. |
0.00322 | 0.996094 | Should I stock the tank anyways or wait until I know for sure my nitrates are lower. |
0.00322 | 0.996094 | Should I drill one hole out and leave the other stock, since I'm only running one coil? |
0.00322 | 0.996094 | Should have just posted another thread asking about why my coil dry hits! |
0.00322 | 0.996094 | Should be getting turbo soon I just didn't wanna mount one with inter cooler cos I wanna keep motor in good nick cos it's an absolute ripper of a engine. |
0.00322 | 0.996094 | Shit got me pissed off cuz I forgot bout the height clearance but once dremel'd off the notch for the graphics card then the power connectors got in the way so ordered myself a uturn shaped extender for the power connector and now everything is so flush it's insane I even got the panel on it. |
0.00322 | 0.996094 | Setting them at a fixed rpm just like you stated. |
0.00322 | 0.996094 | Seriously have a tab where I can put X for Y and someone just trades through that and it sits in a tab until you either cancel the trade or its completed or the timer runs out. |
0.00322 | 0.996094 | Seriously another post or thread would be nice, I lurk here for the daily thread anyways. |
0.00322 | 0.996094 | See the Edit on my post thoose are the coil if that helps I'm sorry if I'm being a completely noob, and thanks for the reply. |
0.00322 | 0.996094 | Seems like a vacuum lock because if I flip the tank every few hits it wicks fine. |
0.00322 | 0.996094 | Seems good to me all knife tips will bend if dropped on the tip even my shun vg max super steel bent on first drop. |
0.00322 | 0.996094 | Same, I busted open a old hard drive and took the magnets out, used some tire glue to glue them on lol, works fine, but one side will come off every few weeks, I just add some glue and keep going. |
0.00322 | 0.996094 | Same here I have some HP SAS Drives and WD and SG Ent Drives in mine and it's not doing that. |
0.00322 | 0.996094 | Same here as for ending up on the bottom a lot, plus side is I'm very comfortable when being mounted, they usually go for an arm bar that I bait out then I get my arm back in, shrimp scissor and I'm out. |
0.00322 | 0.996094 | Rivets are all right I guess but bolts are better imo, for inline anyway. |
0.00322 | 0.996094 | Right now I'm still playing vanilla, but I will investigate zoom mods when I do starting adding some mods. |
0.00322 | 0.996094 | Right now I'm getting along just fine with all the stock parts, including the NiMh battery, but I'd like to understand more for when I upgrade in the future. |
0.00322 | 0.996094 | Right now I have the fuse pulled, but I'm getting the replacement so that at night, the strip looks normal. |
0.00322 | 0.996094 | Removed my installation USB and now I can't boot up, I get the Ntfs error blue screen, I'll just reinstall. |
0.00322 | 0.996094 | Related, when I blow up this BB, thinking about the Wheels MFG one. |
0.00322 | 0.996094 | Really though, I only dry burn before wicking if the coils arent reasonably good looking and I have time, which is normally the case. |
0.00322 | 0.996094 | RDS doesn't fit directly on the slide, mine is based on the plate as well if u look closer. |
0.00322 | 0.996094 | RDA, you'll never go back to leaky tanks or shitty expensive screw in coils again. |
0.00322 | 0.996094 | Quiet thread this one lol I don't get to watch much anymore cos I work daytimes now, but rust seems fine and quite a laugh tbh. |
0.00322 | 0.996094 | Problem is once reassembled it won't work anymore, I will redo it tomorrow, as I think the solder moved when putting screws back. |
0.00322 | 0.996094 | Problem is, now I'm trying to find Titanium and haven't figured out what it looks like on the map lol. |
0.00322 | 0.996094 | Probably should get Fire Emblem since I own a Switch, looks like it has what im looking for. |
0.00322 | 0.996094 | Probably due to async loading, and I think offloading work to a non ui thread. |
0.00322 | 0.996094 | Probably buy some xxxx flex shaft before you start I honestly don't think this is the best way to go. |
0.00322 | 0.996094 | Pretty sure you can, I'd just be in an interior, then wait three full days after removing the mods. |
0.00322 | 0.996094 | Pretty sure it's not my lockring, as I just checked it the other day and my chainring bolts are tight. |
0.00322 | 0.996094 | Posts like this are why I'm just gonna be rocking the distilled water and a silver coil. |
0.00322 | 0.996094 | Posting daily threads about how shitty things are how Bioware took our money and ran is not gonna fix anything, just go play something else and take a couple of days off is all I'm saying, you will live longer lol. |
0.00322 | 0.996094 | Posted before I saw pic, this doesn't look like black spot seems more like they may not be getting enough water possibly. |
0.00322 | 0.996094 | Pm me your address bro if I can amazon you the same titanium dabber I just got I'll send you one. |
0.00322 | 0.996094 | Plus your style is so similar to what mine was starting out I had too haha like I did a test run with hatching, then someone recommended I check out cross countour hatching, and now I just do fine cross hatching, and am still currently trying to perfect doing with ink. |
0.00322 | 0.996094 | Plus maybe I'm totally wrong, but I assume most work trucks aren't rolling around with lift kits installed. |
0.00322 | 0.996094 | Plus I am pretty sure that you need to drain the coolant before replacing a head gasket any how. |
0.00322 | 0.996094 | Piston based doors are usually pretty awesome, my latest set up on my front gate closes some iron bars so nothing can get in my valley. |
0.00322 | 0.996094 | Pfeww, well I don't really know much about hubs tbh but I'd focus on the rear hub since that's where the power gets put down, in the front you'd basicly only need great bearings right? |
0.00322 | 0.996094 | Personally I would go with copper rotor unless my screw factory is backed up. |
0.00322 | 0.996094 | Personally, I tire of these stolen bike threads, OP should just frame someone. |
0.00322 | 0.996094 | Oof yeah i just checked it out and it seems the number two light is flashing so that means replace both power tubes? |
0.00322 | 0.996094 | On my DE there's a plug with a bracket that attaches to the plenum and there's another plug that plugs into that plug you wanna pic? |
0.00322 | 0.996094 | Only way I've been able to fix it is to shut the car off and start it back up and that seems to reboot the head unit, it sucks cause I don't want to pull over on an hour or so drive to work just to restart the engine so I can listen to music. |
0.00322 | 0.996094 | Only one issue so far, it blew a fuse when I went to ride it away lol. |
0.00322 | 0.996094 | One dps and one a little tanky just in case if you know what I'm sayin haha they should let us save builds then pick the build after we have one info like character select shit. |