Datasets:

gnitoahc
/

iac-dataset

id stringlengths 1 3	text stringlengths 10 61.7k	label stringclasses 20 values
0	From Kay Honda's "Helpful HInts ABout Your Honda" infromation sheet (given to new owners of Honda vehicles). "A burning smell may be evident from your new car shortly after taking delivery." --I now own a fire extinguisher;>-- "On Prelude S mels at temperatures above 32 degrees push the accelerator pedal to the floo...	7
1	The subject says it all. My 1984 Chev S10 Pickup's left turn signal does not stop after turning. What cause this to stop automaticaly?. Is this a mechanical problem by the steering wheel?.	7
2	nice theory. too bad the MR2's never came with a four cylinder over 2.0 liters. More like 1.6. Or did they? were the nonturbo MR2II's 2.2 or some such? I also understand that anyone using balancing shafts on four cylinders, must pay SAAB a royalty for using their patented design..like Porsche's 3.0 I4...	7
3	recently-manufactured locomotives have wheel-slip detection systems that use frequencies shared with police radar (i forget which band). these will set off your radar detector if you get close enough, though i believe the range is pretty short.	7
4	they are pretty much junk, stay away from them. they will be replaced next year with all new models.	7
5	A local dealer is advertising "No negotiation necessary!" Make you wonder...	7
6	W >>will NOT do work on internal engine components of the SHO engine. This W > W >Good thing, too. W > W >At about 25K miles my cam sensor went south. 2 different Ford W >dealers tried 5 or 6 different "fixes", none of which worked. Finally W >I took it down the street to the local mechanic. This guy reads the W >c...	7
7	That is a question that can only be answered by yourself and where you live. If you live in a place where crime is apparent, then it might be a good idea to get one simply as a deterrent. However, if a professional thief wants your vehicle, its as good as gone no matter what you do. But to slow down any thieves it w...	7
8	KY>To all those who have PASSATs, do you recommend using Super Unleaded or just KY>regular Unleaded Gasoline. I have been using Regular Unleaded. A friend of mine has KY>a Jetta and has always used Super Unleaded and thinks I should be using the same; KY>however, I believe the advantages of Super Unleaded for CARs $300...	7
9	[stuff about RHD deSoto's deleted] Australians still do drive on the "wrong" side of the road. I believe Sweden changed in 1968. The way I heard it was that they swapped all the traffic signs around one Sunday....	7
10	While I can't think of any Corvettes with side mounted backup lights, I know that Saab started using them about 15 years ago. My 1975 Saab 99 didn't have them, but a friend's 1978 Saab 99 certainly did. In addition to the confentional tail-light mounted backup lights, they had another set integrated into the front tu...	7
11	Hi, I was looking for some helpful advice. I'm a university student with about $7000 to spend, and I'm looking for a used car. Does anyone have any useful advice they could offer to a first- time buyer? I'm not looking for anything sporty, just something functional and reliable (less maintenance costs). Anybody have ...	7
12	think again!! thanks to 60 minutes (tick tick tick), used 200 quattros are bargains.. '89s go for about $15K, '90s go for perhaps 1 or 2K more, the 20 valve 91's are quite a bit more because of an enormous hp and torque gain.. i think they go for about $23 to $25K if you can find one. i have seen quite a lot of '89-'...	7
13	Their number is 1-800-541-4716 they are based in Chicago, IL in case you need to call dir assistance. Their prices are more down to earth than ANY other source for car innards/outers. They will send you a free catalog.	7
14	^^^^^^^^^^ I have a 92 Wrangler Sahara and paid $14.1 new (including the rebate). ^^^^^^^^^^^^^^^^^^ After driving a CJ-5 for 6 years, that fancy stuff is pretty nice. ^^^^^^^^^^^ I like my Wrangler, but when doing some serious off roading, it can't keep up with a CJ-5 because of g...	7
15	Thanks to everyone who responded to my Honda Accord break question. It does seem that the master cylinder is bad. I will have my mechanic double check and be sure it isn't something simpler and cheaper first, but from your responses it sounds like it is very likely to be the master cylinder. Thanks everyone!!	7
16	The Chevrolet brothers were respected racers & test drivers for the Buick Co. when Durant was there. When the directors kicked Durant out of GM in 1910 he took Chevrolet and others with him. As mentioned before, they founded the successful Chevrolet company. A little-known fact is that the Chevrolet Co. actually too...	7
17	Could be due to the rear-end ratio also. Usually automatics have different rear-ends than manuals, from my limited experience anyways. David	7
18	Yes, however, with the top off and the rear window down this car is more like a convertible than a coupe. Think of it as a convertible with an integrated roll-bar like addition.	7
19	We are working on gas-solid adsorption air-con system for auto applications. In this kind of system, the energy for regenerating the adsorbent is from the exhaust gas. Anyone interested in this mail email me or follow up this thread, we may have a discussion on prospects of this technology. Max	7
20	Dear Netters: I am looking to buy a used Eagle Talon '91 or '91 TSi AWD. Question is that the '91 TSi AWD was mentioned in the April Consumer Reports to a car to avoid! In particular, the manual transmission, electrical system, and brakes were below par (in both models). A friend of mine ownes a '90 TSi AWD and he h...	7
21	I have just taken delivery on a new GM car (Firebird) with a clearcoat finish. I assume that it is probably urethane since the industry has moved in that direction in paints. In years past, it used to be recommended that owners wait up to 60 days before you wax a car, for the paint to "cure." The dealer shop ma...	7
22	xIn article <1qgi8eINNhs5@skeena.ucs.ubc.ca> yiklam@unixg.ubc.ca (Yik Chong Lam) x>Hello, x> x> Does anyone know how to take out the bolt under the engine x>compartment? Should I turn clockwise or counter? I tried any kind x>of lubricants, WD-40,etc, but I still failed! x> Do you think I can use a electri...	7
23	I saw an interesting product in NY Auto Show, and would like to hear your comments. MILITECH(tm) is yet another oil additive. But the demonstration of this product really impressive, if it didn't cheat. The setup of the demo is fairly simple. A cone shaped rotor is half submerged in a small oil sink, filled with mot...	7
24	The VW "Thing" Kubelwagen lookalike is still manufactured in Mexico and possibly South America. Good luck importing one-- They probably don't meet US safety and pollution requirements. There are mechanics and junkyards which specialize in VW; they might be helpful for finding a "Thing" unless the WWII re-enacter...	7
25	You get a mic with the C650 if you get it with the internal CD ROM drive. Gary --	4
26	Huh? If I buy a 128M optical, I might lose my friends? Why - do they smell bad? :-) On a serious note, I have heard the tales about SyQuest failures. But I am curious about Jon's comments on cartridge wear for the the Bernoullis. Can someone elaborate? Is there a general consensus that the 128M opticals are the...	4
27	Of course its possible, I get 1024x768 on my Centris 650. All you need is a correctly wired video cable. Gary --	4
28	With a little luck, I could own a C650 sometime in the near future, and so I was just wondering if someone could clear these two questions up for me: 1. What speed SIMMS does the C650 need/want? (I know that it needs 80ns VRAM...not sure for the main RAM.) 2. I've heard two conflicting stories about the total expa...	4
29	I can't even hear the fan on my 650.....gee I wonder if its working.....yup, just checked, its exhausting air out the back just fine. Gary --	4
30	The DayStar PowerCache for the SE/30 replaces the CPU with an accelerated CPU plus the powercache. This leavese the PDS slot open for a video card. Currenty, DayStar does not have the '040 in this configuration, but it is due out early next year. With their upgrade policy, you can get the '030 accelerator now, and wh...	4
31	Regarding the post for information about the Mac Portable and the Powerbook 100, here are a couple of the answers: (1) Does the Mac Portable support Appletalk? Yes (2) What CPU is in the Mac Portable? A low power version of the 68000 running at 15.87 Mhz. (3) Does the Mac Portable run system 7? Yes, although it does ...	4
32	A SIMM is a small PCB with DRAM chips soldered on. --maarten	4
33	I too am interested in peoples' experience with accelerators for the SE. Is an accelerator the best route to improve performace in my SE, or should I consider upgrading to an SE/30 motherboard? Obviously, buying a new mac would be ideal, but alas, I only have enough money for an accelerator or motherboard. E-mail r...	4
34	After reading reports from Germany of success in accelerating a Quadra or Centris simply by changing the clock oscillator, I decided to test the claim. I pulled out my Variable Speed Overdrive and the motherboard's 50 mhz clock chip. I put a socket in the clock's place and inserted a 64 mhz TTL clock oscillator I had l...	4
35	Hi folks, what exactly is the maximum memory I can put in a Quadra 700. My manual says 20MB (with 4 x 4MB SIMMs), but MacWarehouse and the like advertise 16MB SIMMs to give it a total of 68MB. Who's wrong? Has anybody got 68MB? Thanks, Chris	4
36	: Is there a fix for this? We have a Quadra 900 that will NOT finish startup : unless there is a monitor connected. This would be no problem, but since : we're running it as a file server, there is no need to have a monitor : connected all the time. I've seen a control panel made for this. I don't remember the name, w...	4
37	Some kind soul told me that I could change the serial port buffer size of Zterm via ResEdit. He did not tell me HOW I could change it using ResEdit, and I have lost his e-mail address. Could he or any one else please tell me what to do? I assume that the relevant resource is zSet, but I do not know, and I have no tem...	4
38	Don't believe the hype. There is no such thing as a PowerPC slot.	4
39	I tried the right set and it didn't work. I'm on the phone to their tech support right now and the guys doesn't know what a desktop rebuild is!!! He's got me holding for someone else............... And holding, and holding, and holding.	4
40	Does anyone know how to reach Micron? I am interested in getting some specifics about what types of monitors work with their Micron Xceed card for the se/30. either e-mail or phone number would be prefered. Or if you have the answers to my questions, i'd appreciate a reply. Thanks. -- ---------------------------...	4
41	I am having trouble with SCSI on a Mac IIfx. The machine is 3 years old and I have been using the same hard drive (internal Maxtor LXT-200S) for two and a half years. The disk recently crashed. I reformatted (Silverlining 5.42), but during the reformat I received random write errors during testing. The error message re...	4
42	In the May issue of C't Magazine was an article about upgrading 040 models of apple. They simply change crystals and add a fan. Hammerhead: Centris 610 was able to work with 25 MHz (cooler prefered) and for 1000 DM you get an 68040 (33MHz) which works with the appropriate crystal at full speed. ...	4
43	The Partition button in Apple's HD Setup lets you set up A/UX and other types of partitions. It WON'T let you create more than one normal mac volume. You need SilverLining or something similar to do that. It WILL, however, allow you to take advantage of some possible unused space on your hard disk, if you don't mind re...	4
44	We have a user that has Word 5.0 and is using symbols such as pi and other mathematic sysmbols, plus doing fractions, etc. The document shows up on the screen with no problems, looks fine. When she tries to print it on a IIg the pi changes to an upside down caret, and several other symbols change to double quotes at ...	4
45	I had the same problem with my 512 a long time ago. Resoldering the joints on the motherboard (all of them) fixed it. Turns out that continuous heating and cooling caused annular (ring-shaped) cracks to develop in the solder, effectively cutting the video circuitry off. If you're not a solder-jockey you might want t...	4
46	Mysstem crashes aftwer sleepp. I use 1.0.1 enabler. I use appletalk and filesharing. I have and ExpressModem. --Lowell	4
47	I have two questions: 1) What would be required to create a Macintosh PC network including laser printers, line printers, etc.?	4
48	Please could someone in the US give me the current street prices on the following, with and without any relevant taxes: 8 Mb 72 pin SIMM 16 Mb 72 pin SIMM (both for Mac LC III) Are any tax refunds possible if they are to be exported to the UK? Can you recommend a reliable supplier?	4
49	I believe that in order to get at the innards of the new mouse, you must remove the label on the bottom that says "Apple Desktop Bus Mouse II" There you should find two screws on either side. I haven't tried it myself yet, but when I ran my fingernail accross the label, these two divots appeared, and I can only assume...	4
50	Another source: There's a poly blitter for mode y (mode x in 320x200) at sunee.uwaterloo.ca. Also there is REND386, an even faster 3D renderer with VR extensions. --------------------------------------------------------------------------	1
51	-> According to the TIFF 5.0 Specification, the TIFF "version number" -> (bytes 2-3) 42 has been chosen for its "deep philosophical -> significance". -> Last week, I read the Hitchhikers Guide To The Galaxy, and rotfl the -> second time. (After millions of years of calculation, the second-best -> computer of all time...	1
52	For better worse, the source on this on is Michael Barnsley. His article in The Science of Fractal Images (Peitgen et al) is a fair-to-middling intro. Barnsley's book Fractals Everywhere is a more thorough treatment. The book covers Iterated Function Systems in general, and their application to image compression is cle...	1
53	Are complex bio-medical images available anywhere on the net for experimentation? By complex I mean that every sampled data point has a magnitude and phase information both.	1
54	Maybe I should point out that we are not talking about c.s.amiga.*. Only comp.graphics.	1
55	You'll probably have to set the palette up before you try drawing in the new colours. Use the bios interrupt calls to set the r g & b values (in the range from 0-63 for most cards) for a particular palette colour (in the range from 0-255 for 256 colour modes). Then you should be able to draw pixels in those palette v...	1
56	Does anyone out there have or know of, any kind of utility program for Ribbons? Ribbons are a popular representation for 2D shape. I am trying to find symmetry axis in a given any 2D shape using ribbons. Any suggestions will be greatly appreciated how to start program. Thanks very much in advance, Hoi	1
57	Yesterday I wrote a program to do bilinear interpolation ala Numerical Recipes, with the PBMPLUS libraries. I'm pretty happy with the results, but I'm looking for any already-coded non-linear interpolation schemes before I go ahead an try to write one. Any pointers? --	1
58	What are the main advantages of this method? I have seen it described, and the algiorithm seems a little bit long. I developed my own method, which requires that the points be in a counter-clockwise order, and returns whether you are looking at the back or the front, similar to the plane eqn method. It uses few cal...	1
59	I'm currently looking for information about different graphics formats, especially PPM, PCX BMP and perhaps GIF. Does anyone know if there exist any files at some site that describes these formats ??? Thanks !	1
60	Hi Steve, As the author of Multiverse, I feel I had better respond to your mailnote questioning whether anyone had managed to compile this software - the quick answer is yes! The long answer is yes - but a few have had a few problems with their platforms - not all unix's are the same, you know! As far as "many bugs" g...	1
61	Yes, that's known as "Bresenhams Run Length Slice Algorithm for Incremental lines". See Fundamental Algorithms for Computer Graphics, Springer-Verlag, Berlin Heidelberg 1985. Hmm. I don't think I can help you with this, but you might take a look at the following: "Double-Step Incremental Generation of Lines and Ci...	1
62	: \|> : \|> Is there any way to connect two pointing devices to one serial : \|> port? I haven't tried this but I believe they would interfere : \|> with each other (?) even if only one at a time would be used. : Just get an A-B switch for RS232. Look in Computer Shopper. : They are available fai...	1
63	By '8 grey level images' you mean 8 items of 1bit images? It does work(!), but it doesn't work if you have more than 1bit in your screen and if the screen intensity is non-linear. With 2 bit per pixel; there could be 1c_1 + 4c_2 timing, this gives 16 levels, but they are linear if screen intensity is linear. With 1*...	1
64	SIGKIDS CALL FOR PARTICIPATION SIGKids Research Showcase is where learning is hip. Pushing the edge in education, computer graphics, and new technologies, the SIGKids Research Showcase will provide SIGGRAPH's attendees with the latest in applying computer technology to form state of the art educational experiences. S...	1
65	I would like a reference to an algorithm that can detect whether one closed curve bounded by some number of bezier curves lies completely within another closed curve bounded by bezier curves. Thanks.	1
66	Hi, I've come across a fast triangle fill-draw routine for mode 13h. By calling this routine enough times, you have a fast polygon drawing routine. I think I ftp'ed from wuarchive.wustl.edu:/pub/MSDOS_UPLOADS/programming. I have a copy of it so I reupload it there. The triangle.txt file has this to say :	1
67	Hello... Does anyone know of any C or C++ function libraries in the public domain that assist in parsing an AUTOCAD .dxf file? Please e-mail. Thanks, --	1
68	Organization: "A World of Information at your Fingertips" Keywords: Craig, You should still consider the Targa+. I run windows 3.1 on it all the time at work and it works fine. I think all you need is the right driver.	1
69	Archive-name: jpeg-faq Last-modified: 18 April 1993 This FAQ article discusses JPEG image compression. Suggestions for additions and clarifications are welcome. New since version of 3 April 1993: * New versions of Image Archiver and PMJPEG for OS/2. This article includes the following sections: [1] What is JPE...	1
70	The VESA standard can be requested from VESA: VESA 2150 North First Street, Suite 440 San Jose, CA 95131-2029 Ask for the VESA VBE and Super VGA Programming starndards. VESA also defines local bus and other standards. The VESA standard only addresses ways in which an application can find out info and capabili...	1
71	A book that I can somewhat recommend is : Pratical Image Processing in C by Craig A. Lindley published by Wiley	1
72	Archive-name: graphics/resources-list/part2 Last-modified: 1993/04/17 Computer Graphics Resource Listing : WEEKLY POSTING [ PART 2/3 ] =================================================== Last Change : 17 April 1993 14. Plotting packages ===================== Gnuplot 3.2 ----------- It is one of the best 2- and 3...	1
73	I am seeking some alternate solutions on how to turn a Postscript Type 1 or TrueType font outline into polygons that can be subsequently scan converted by a 3D scanline renderer. I have been studying the problem of font conversion for a few years but have never had the need to implement such a system. Well, I now hav...	1
74	Excuse the sheer newbieness of this post, but I am looking for a decent PaintProgram which will save to various file formats (.BMP .PCX etc etc) via ftp, freeware, or shareware. I would like to check out the available programs for little $$ before I check out the commercial market. Thanks in advance for any help or...	1
75	a What about positional uncertainties in S-L 1993e? I assume we know where and what Galileo is doing within a few meters. But without the HGA, don't we have to have some pretty good ideas, of where to look before imaging? If the HGA was working, they could slew around in near real time (Less speed of light dela...	14
76	TRIAD, the first drag-free satellite, was designed and built by the Johns Hopkins Applied Physics Laboratory and launched 2 Sept 1972. The satellite was in three sections separated by two booms. The central section housed the DISCOS Disturbance Compensation System, which consisted of a proof mass of special non-m...	14
77	It was a test of the first reusable tool. Pointy so they can find them or so they will stick into their pants better, and be closer to their brains?	14
78	Kudos to Mark for his generous offer, but there already exists a large (email-based) forwarding system for sci.space posts: Space Digest. It mirrors sci.space exactly, and provides simple two-way communication. TO SUBSCRIBE: Send the following message in the body (not subject) of an email message: subsc...	14
79	{Description of "External Tank" option for SSF redesign deleted} Yo Ken, let's keep on-top of things! Both the "External Tank" and "Wingless Orbiter" options have been deleted from the SSF redesign options list. Today's (4/23) edition of the New York Times reports that O'Connor told the panel that some redesign propo...	14
80	Bill says ... I presume the one you refer to is "Space Sailing" by Jerome L. Wright. He worked on solar sails while at JPL and as CEO of General Astronautics. I'll furnish ordering info upon request. The Friedman book is called "Starsailing: Solar Sails and Interstellar Travel." It was available from the Planetar...	14
81	Okay here is what I have so far: Have a group (any size, preferibly small, but?) send a human being to the moon, set up a habitate and have the human(s) spend one earth year on the moon. Does that mean no resupply or ?? Need to find atleast $1billion for prize money. Contest open to different classes of participant...	14
82	definitely a lemur. Elvis couldn't spell, just listen to any of his songs.	14
83	... How can you tell they're identical? You got one of them "Star Drek: The Next Syndication" neutrino scanners?	14
84	<stuff deleted> You mean like: seconds, minutes, hours, days, months, years. . . :-) Remember, the Fahrenheit temperature scale is also a centigrade scale. Some revisionists tell the history something like this: The coldest point in a particular Russian winter was marked on the thermometer as was the body tempera...	14
85	Apologies if this gets posted twice, but I don't think the first one made it. -------------------------------------------------------------------- FOR IMMEDIATE RELEASE Contact: OASIS (310) 364-2290 15 April 1993 Los Angeles, CA LOCAL NATIONAL SPACE SOCIETY CHAPTER...	14
86	Just out of curiousity, how old is Worden? -- _______________________________________________________________________________	14
87	AW&ST had a brief blurb on a Manned Lunar Exploration confernce May 7th at Crystal City Virginia, under the auspices of AIAA. Does anyone know more about this? How much, to attend???? Anyone want to go?	14
88	Forwarded from: PUBLIC INFORMATION OFFICE JET PROPULSION LABORATORY CALIFORNIA INSTITUTE OF TECHNOLOGY NATIONAL AERONAUTICS AND SPACE ADMINISTRATION PASADENA, CALIF. 91109. (818) 354-5011 Contact: Mary A. Hardin FOR IMMEDIATE RELEASE April 15, 1993 #1506 Scientists at NASA's Jet Pr...	14
89	I was wondering if the FAQ files could be posted quarterly rather than monthly. Every 28-30 days, I get this bloated feeling.	14
90	The following are my thoughts on a meeting that I, Hugh Kelso, and Bob Lilly had with an aide of Sen. Patty Murrays. We were there to discuss SSTO, and commercial space. This is how it went... After receiving a packet containing a presentation on the benifits of SSTO, I called and tried to schedule a meeting with ...	14
91	If gamma ray bursters are extragalactic, would absorption from the galaxy be expected? How transparent is the galactic core to gamma rays? How much energy does a burster put out? I know energy depends on distance, which is unknown. An answer of the form _X_ ergs per megaparsec^2 is OK.	14
92	Umm, perhaps you could explain what 'rights' we are talking about here ..	14
93	Actually, that is no longer true. In the last few years Congress has ammended laws to provide whatever is needed. Note that both Spacehab and Comet are funded this way. The problems aren't legal nor technical. The problem is NASA's culture. Allen	14
94	Are breathable liquids possible? I remember seeing an old Nova or The Nature of Things where this idea was touched upon (it might have been some other TV show). If nothing else, I know such liquids ARE possible because... They showed a large glass full of this liquid, and put a white mouse (rat?) in it. Since the l...	14
95	I've seen a film of it, my memory may be faulty, but as I remember it the vehicle was slightly over a meter long, with a thick baseplate 30-40 cm in diameter. I think the narrative said it was propelled by dynamite sticks. There were four detonations within about 2 s, the second coming after about 2 m of flight in. Max...	14
96	Joint Press release ESA/UN No 18-93 Paris, 19 April 1993 UN/ESA joint training course on satellite applications to be held in Italy, 19-30 April The United Nations and the European Space Agency (ESA) are jointly organising a training course on the applications of satellite data gathered by the European Remote Sensing...	14
97	What evidence indicates that Gamma Ray bursters are very far away? Their distribution is very isotropic and the intensity distribution, crudely speaking, indicates we're seeing an edge to the distribution. Given the enormous power, i was just wondering, what if they are quantum black holes or something l...	14
98	There was a Science fiction movie sometime ago (I do not remember its name) about a planet in the same orbit of Earth but hidden behind the Sun so it could never be visible from Earth. Turns out that that planet was the exact mirror image of Earth and all its inhabitants looked like the Earthings with the differenc...	14
99	I posted this over in sci.astro, but it didn't make it here. Thought you all would like my wonderful pithy commentary :-) What? You guys have never seen the Goodyear blimp polluting the daytime and nightime skies? Actually an oribital sign would only be visible near sunset and sunrise, I believe. So pollution at nig...	14

End of preview. Expand in Data Studio

IAC Dataset

Intent-Aware Clustering benchmark datasets. Each dataset is a separate config; select one with name= when loading:

from datasets import load_dataset
ds = load_dataset("gnitoahc/iac-dataset", name="arxiv")

Common Fields

Field	Type	Description
`id`	string	Original row index from the source dataset
`text`	string	Input text (may be multi-sentence or multi-line)
`label`	string	Class label for the text

Datasets

20news

Rows: 500
Config name: 20news
Labels (20): 0, 1, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 2, 3, 4, 5, 6, 7, 8, 9

arxiv

Rows: 504
Config name: arxiv
Labels (9): Computer Vision, Cryptography and Security, Human-Computer Interaction, Information Retrieval, Machine Learning, Robotics, Signal Processing, Social and Information Networks, Software Engineering

gomotion

Rows: 504
Config name: gomotion
Labels (14): admiration, amusement, anger, approval, disappointment, disgust, embarrassment, excitement, fear, gratitude, joy, love, pride, sadness

newsSentiment

Rows: 510
Config name: newsSentiment
Labels (3): negative, neutral, positive

sarcasm

Rows: 831
Config name: sarcasm
Labels (6): 0, 1, 2, 3, 4, 5

yahoo

Rows: 500
Config name: yahoo
Labels (10): 1, 10, 2, 3, 4, 5, 6, 7, 8, 9

Downloads last month: 61