from
stringclasses 2
values | value
stringlengths 16
6.77k
|
|---|---|
human
|
How many values of $x$ with $0^\circ \le x < 360^\circ$ satisfy $\sin x = -0.73$?
|
gpt
|
[asy]
pair A,C,P,O,D;
draw((0,-1.2)--(0,1.2),p=black+1.2bp,Arrows(0.15cm));
draw((-1.2,0)--(1.2,0),p=black+1.2bp,Arrows(0.15cm));
A = (1,0);
O= (0,0);
label("$x$",(1.2,0),SE);
label("$y$",(0,1.2),NE);
P = rotate(150)*A;
D = foot(P,A,-A);
draw(Circle(O,1));
label("$O$",O,SE);
draw((-1,-0.73)--(1,-0.73),red);
[/asy]
For each point on the unit circle with $y$-coordinate equal to $-0.73$, there is a corresponding angle whose sine is $-0.73$. There are two such points; these are the intersections of the unit circle and the line $y=-0.73$, shown in red above. Therefore, there are $\boxed{2}$ values of $x$ with $0^\circ \le x < 360^\circ$ such that $\sin x = -0.73$.
|
human
|
The interior of a right, circular cone is 8 inches tall with a 2-inch radius at the opening. The interior of the cone is filled with ice cream, and the cone has a hemisphere of ice cream exactly covering the opening of the cone. What is the volume of ice cream? Express your answer in terms of $\pi$.
|
gpt
|
The volume of the cone is $\frac13\cdot4\pi\cdot8=\frac{32}{3}\pi$ cubic inches, and the volume of the hemisphere is $\frac23\cdot8\pi=\frac{16}{3}\pi$. The sum is \[
\left(\frac{16}{3}+\frac{32}{3}\right)\pi=\boxed{16\pi}.
\]
|
human
|
A regular polygon has an exterior angle that measures $15$ degrees. How many sides does the polygon have?
|
gpt
|
The sum of the exterior angles of a polygon is $360^\circ$ as long as we take only one exterior angle per vertex. The polygon is regular, so all of the exterior angles have the same degree measure of $15$ degrees. If the polygon has $n$ sides, then the sum of the exterior angles is $15n=360$. So $n=24$ and the polygon has $\boxed{24}$ sides.
|
human
|
A right triangle has a side length of 21 inches and a hypotenuse of 29 inches. A second triangle is similar to the first and has a hypotenuse of 87 inches. What is the length of the shortest side of the second triangle?
|
gpt
|
Using the Pythagorean Theorem, we calculate that the other leg of the original right triangle must be $$\sqrt{29^2 - 21^2} = \sqrt{841 - 441} = \sqrt{400} = 20$$ inches. Since 87 is 3 times 29, the length of the shortest side of the second triangle must be $3 \times 20 = \boxed{60\text{ inches}}$.
|
human
|
An octagon is inscribed in a square so that the vertices of the octagon trisect the sides of the square. The perimeter of the square is 108 centimeters. What is the number of square centimeters in the area of the octagon?
|
gpt
|
Each side of the square has length $27$. Each trisected segment therefore has length $9$. We can form the octagon by taking away four triangles, each of which has area $\frac{(9)(9)}{2}$, for a total of $(2)(9)(9) = 162$. The total area of the square is $27^2=729$, so the area of the octagon is $729-162=\boxed{567}$.
|
human
|
Two circles of radius 10 cm overlap such that each circle passes through the center of the other, as shown. How long, in cm, is the common chord (dotted segment) of the two circles? Express your answer in simplest radical form.
[asy]
draw(Circle((0,0),10),linewidth(1));
draw(Circle((10,0),10),linewidth(1));
dot((0,0));
dot((10,0));
draw((5,8.66)--(5,-8.66),linetype("0 4")+linewidth(1));
[/asy]
|
gpt
|
[asy]
draw(Circle((0,0),10),linewidth(1));
draw(Circle((10,0),10),linewidth(1));
draw((0,0)--(5,8.66)--(10,0)--cycle,linewidth(1));
draw((5,8.66)--(5,-8.66),linetype("0 4")+linewidth(1));
[/asy] The triangle is equilateral, since the three sides are equal radii. The common chord is twice an altitude of the triangle. The area of the triangle is $\frac{10^2\sqrt3}{4}=25\sqrt3$ sq cm, so the altitude (length $h$ cm) has $\frac{10h}{2}=25\sqrt{3}$ or $h=5\sqrt3$. The chord is twice this or $\boxed{10\sqrt3}$ cm.
|
human
|
Khali has to shovel snow off the sidewalk in front of his house. The sidewalk is 20 feet long and 2 feet wide. If the snow is $\frac{1}{2}$ foot deep, how many cubic feet of snow does Khali have to shovel off the sidewalk?
|
gpt
|
The snow on Khalil's sidewalk is in the shape of a rectangular prism whose dimensions are 20 feet by 2 feet by $\frac{1}{2}$ feet. The volume of such a rectangular prism is $(20\text{ ft.})(2\text{ ft.})\left(\frac{1}{2}\text{ ft.}\right)=\boxed{20}$ cubic feet.
|
human
|
What is the area of the shaded region in the figure below? Round your answer to the nearest square centimeter.
[asy]
draw((0,0) -- (3,0) -- (3,3) -- (0,3)--cycle) ; draw((3,0)-- (12,0) -- (12,9) -- (3, 9)--cycle);
label ( "3 cm", (0,1.5), W); label ( "3 cm", (1.5 ,0), S);
label ( "9 cm", (3+9/2 ,0), S);label ( "9 cm", (12 ,9/2), E);
draw( rightanglemark( (3, 9) , (3,0) , (12,0) ,31 ));
draw( rightanglemark( (3,0), (12,0), (12, 9) ,31 ));
draw( rightanglemark( (3,0), (3,3), (0, 3) ,21 ));
draw( rightanglemark( (3,3), (0, 3) , (0,0) ,21 ));
draw( (0,0) -- (12, 9));
fill( (3, 9/4) -- (12, 9) -- (3,9)-- cycle , darkgray); draw( rightanglemark( (12,9) , (3, 9), (3,0), 31 ));
[/asy]
|
gpt
|
Label points $O,A,B,C,D,E$ as follows.
[asy]
draw((0,0) -- (3,0) -- (3,3) -- (0,3)--cycle) ; draw((3,0)-- (12,0) -- (12,9) -- (3, 9)--cycle);
label ( "3", (0,1.5), W); label ( "3", (1.5 ,0), S); label ( "9", (3+9/2 ,0), S);label ( "9", (12 ,9/2), E);
draw( (0,0) -- (12, 9));
fill( (3, 9/4) -- (12, 9) -- (3,9)-- cycle , darkgray);
label("$O$",(0,0),SW); label("$A$",(3,0),S); label("$B$",(12,0),SE); label("$C$",(12,9),NE); label("$D$",(3,9),NW); label("$E$",(3,2.25),E);
[/asy]
The shaded area is the area of $\triangle CDE$. To find this area, we examine pairs of similar triangles to find desired side lengths.
First, we have $\triangle EOA \sim \triangle COB$, so we have \[\frac{EA}{CB}=\frac{OA}{OB}=\frac{3}{3+9}=\frac{1}{4},\] and since we know $CB=9$, we can find that $EA=9/4$. This means that $DE=9-9/4=27/4$.
Since we know $DE$ and $DC$, we can now find the area of triangle $CDE$. The desired area is $\frac{27/4 \cdot 9}{2}=\frac{243}{8}=30.375$. This value, rounded to the nearest integer as requested, is $\boxed{30}$.
|
human
|
Which of the cones below can be formed from a $252^{\circ}$ sector of a circle of radius 10 by aligning the two straight sides?
[asy]
draw((5.8,8.1)..(-10,0)--(0,0)--(3.1,-9.5)..cycle);
label("10",(-5,0),S);
label("$252^{\circ}$",(0,0),NE);
[/asy]
A. base radius = 6, slant =10
B. base radius = 6, height =10
C. base radius = 7, slant =10
D. base radius = 7, height =10
E. base radius = 8, slant = 10
|
gpt
|
The slant height of the cone is equal to the radius of the sector, or $10$. The circumference of the base of the cone is equal to the length of the sector's arc, or $\frac{252^\circ}{360^\circ}(20\pi) = 14\pi$. The radius of a circle with circumference $14\pi$ is $7$. Hence the answer is $\boxed{C}$.
|
human
|
Altitudes $\overline{AP}$ and $\overline{BQ}$ of an acute triangle $\triangle ABC$ intersect at point $H$. If $HP=5$ while $HQ=2$, then calculate $(BP)(PC)-(AQ)(QC)$. [asy]
size(150); defaultpen(linewidth(0.8));
pair B = (0,0), C = (3,0), A = (2,2), P = foot(A,B,C), Q = foot(B,A,C),H = intersectionpoint(B--Q,A--P);
draw(A--B--C--cycle);
draw(A--P^^B--Q);
label("$A$",A,N); label("$B$",B,W); label("$C$",C,E); label("$P$",P,S); label("$Q$",Q,E); label("$H$",H,NW);
[/asy]
|
gpt
|
We use similar triangles: $\triangle BPH \sim \triangle APC$ since they are both right triangles and the angles at $A$ and $B$ are each complementary to $\angle C$, and thus congruent. Similarly, $\triangle AQH \sim \triangle BQC$. We know that $HP=5$ and $HQ=2$, so we have the ratios \[ \frac{BP}{5} = \frac{AH+5}{PC}\]and \[ \frac{AQ}{2} = \frac{BH+2}{QC}. \]Cross-multiplying and then subtracting the second equality from the first yields \[ (BP)(PC) - (AQ)(QC) = 5(AH)+25 - 2(BH) - 4. \]But $\triangle BPH \sim \triangle AQH$, so $BH/5 = AH/2$, so $5(AH)-2(BH)=0.$ Hence our desired answer is simply $25-4=\boxed{21}$.
|
human
|
A hemisphere-shaped bowl with radius 1 foot is filled full with chocolate. All of the chocolate is then evenly distributed between 27 congruent, smaller hemisphere-shaped molds. What is the radius of each of the smaller molds, in feet?
|
gpt
|
A sphere with radius $r$ has volume $\frac{4}{3}\pi r^3$, so a hemisphere with radius $r$ has volume $\frac{2}{3}\pi r^3$. The large hemisphere-shaped bowl has volume $\frac{2}{3}\pi(1^3) = \frac{2}{3}\pi$ cubic feet.
Let each of the smaller hemisphere-shaped molds have radius $r$. Their total volume, in terms of $r$, is $27\cdot\frac{2}{3}\pi r^3$ cubic feet, so we have \[27\cdot\frac{2}{3}\pi r^3 = \frac{2}{3}\pi.\]Dividing both sides by $\frac{2}{3}\pi$ yields $27r^3 =1$, so $r=\sqrt[3]{\frac{1}{27}}=\boxed{\frac{1}{3}}$ feet.
|
human
|
The sides of triangle $PQR$ are tangent to a circle with center $C$ as shown. Given that $\angle PQR = 63^\circ$ and $\angle QPR = 59^\circ$, find $\angle QRC$, in degrees.
[asy]
unitsize(1.0 cm);
pair Q, P, R, C;
Q = (2.43,3.46);
P = (0,0);
R = (4.43,0);
C = incenter(Q,P,R);
draw(Q--P--R--cycle);
draw(incircle(Q,P,R));
draw(R--C);
label("$Q$", Q, N);
label("$P$", P, SW);
label("$R$", R, SE);
label("$C$", C, N);
[/asy]
|
gpt
|
The circle with center $C$ is the incircle of $\triangle PQR$. So, any segment from a vertex of the triangle to $C$ is an angle bisector.
The sum of the measures of the internal angles of a triangle is $180^\circ$, so
\begin{align*}
\angle QRP &= 180^\circ - \angle PQR - \angle QPR \\
&= 180^\circ - 63^\circ - 59^\circ\\
&= 58^\circ.
\end{align*}Since $\overline{RC}$ bisects $\angle QRP$, we have $\angle QRC = \frac{58^\circ}{2} = \boxed{29^\circ}$.
|
human
|
In the diagram, $\triangle XYZ$ is right-angled at $X,$ with $YX=60$ and $XZ=80.$ The point $W$ is on $YZ$ so that $WX$ is perpendicular to $YZ.$ Determine the length of $WZ.$ [asy]
pair X, Y, Z, W;
Y=(0,0);
X=(36,48);
Z=(100,0);
W=(36,0);
draw(X--Y--Z--X--W);
label("Y", Y, SW);
label("X", X, N);
label("W", W, S);
label("Z", Z, SE);
label("60", (X+Y)/2, NW);
label("80", (X+Z)/2, NE);
[/asy]
|
gpt
|
By the Pythagorean Theorem, \begin{align*}
YZ^2 &= YX^2 + XZ^2 \\
&= 60^2+80^2 \\
&= 3600+6400 \\
&=10000,
\end{align*} so $YZ=100.$
(We could also have found $YZ$ without using the Pythagorean Theorem by noticing that $\triangle XYZ$ is a right-angled triangle with its right-angle at $X$ and $XY=60=3\cdot 20$ and $XZ=80=4\cdot 20.$ This means that $\triangle XYZ$ is similar to a 3-4-5 triangle, and so $YZ=5\cdot 20=100.$)
Since $\triangle YXZ$ is right-angled at $X,$ its area is $$\frac{1}{2}\cdot 60\cdot 80=2400.$$ Since $XW$ is perpendicular to $YZ,$ then the area of $\triangle YXZ$ is also equal to $$\frac{1}{2}\cdot 100\cdot XW=50XW.$$ Therefore, $50XW=2400,$ so $XW=48.$ By the Pythagorean Theorem, \begin{align*}
WZ^2 &= 80^2 - 48^2 \\
&= 6400 - 2304 \\
&= 4096.
\end{align*} Thus, $WZ = \sqrt{4096}=\boxed{64}.$
An alternative solution comes by noticing that $\triangle XZW$ and $\triangle YZX$ are similar. Therefore \[\frac{WZ}{XZ}=\frac{XZ}{YZ}\] or \[\frac{WZ}{80}=\frac{80}{100}=\frac45.\] This tells us that \[WZ=\frac45\cdot80=\boxed{64}.\]
|
human
|
What is the number of square units in the area of the hexagon below?
[asy]
unitsize(0.5cm);
defaultpen(linewidth(0.7)+fontsize(10));
dotfactor = 4;
int i,j;
for(i=0;i<=4;++i)
{
for(j=-3;j<=3;++j)
{
dot((i,j));
}
}
for(i=1;i<=4;++i)
{
draw((i,-1/3)--(i,1/3));
}
for(j=1;j<=3;++j)
{
draw((-1/3,j)--(1/3,j));
draw((-1/3,-j)--(1/3,-j));
}
real eps = 0.2;
draw((3,3.5+eps)--(3,3.5-eps));
draw((4,3.5+eps)--(4,3.5-eps));
draw((3,3.5)--(4,3.5));
label("1 unit",(3.5,4));
draw((4.5-eps,2)--(4.5+eps,2));
draw((4.5-eps,3)--(4.5+eps,3));
draw((4.5,2)--(4.5,3));
label("1 unit",(5.2,2.5));
draw((-1,0)--(5,0));
draw((0,-4)--(0,4));
draw((0,0)--(1,3)--(3,3)--(4,0)--(3,-3)--(1,-3)--cycle,linewidth(2));
[/asy]
|
gpt
|
Each of the four shaded triangles in the diagram below has area $\frac{1}{2}(1)(3)=\frac{3}{2}$ square units, and the shaded triangles along with the hexagon form a rectangular region whose area is $6\cdot4=24$ square units. Therefore, the area of the hexagon is $24-4\cdot \frac{3}{2}=\boxed{18}$ square units.
[asy]
unitsize(1cm);
defaultpen(linewidth(0.7)+fontsize(10));
dotfactor = 4;
fill((4,0)--(4,3)--(3,3)--cycle,gray);
fill((4,0)--(4,-3)--(3,-3)--cycle,gray);
fill((0,0)--(0,3)--(1,3)--cycle,gray);
fill((0,0)--(0,-3)--(1,-3)--cycle,gray);
int i,j;
for(i=0;i<=4;++i)
{
for(j=-3;j<=3;++j)
{
dot((i,j));
}
}
for(i=1;i<=4;++i)
{
draw((i,-1/3)--(i,1/3));
}
for(j=1;j<=3;++j)
{
draw((-1/3,j)--(1/3,j));
draw((-1/3,-j)--(1/3,-j));
}
real eps = 0.2;
draw((3,3.5+eps)--(3,3.5-eps));
draw((4,3.5+eps)--(4,3.5-eps));
draw((3,3.5)--(4,3.5));
label("1 unit",(3.5,4));
draw((4.5-eps,2)--(4.5+eps,2));
draw((4.5-eps,3)--(4.5+eps,3));
draw((4.5,2)--(4.5,3));
label("1 unit",(5.2,2.5));
draw((-1,0)--(5,0));
draw((0,-4)--(0,4));
draw((0,0)--(1,3)--(3,3)--(4,0)--(3,-3)--(1,-3)--cycle,linewidth(1.5));
[/asy]
|
human
|
What is the total area, in square units, of the four triangular faces of a right, square-based pyramid that has base edges measuring 6 units and lateral edges measuring 5 units?
|
gpt
|
The triangular faces are isosceles triangles. We drop an altitude from the apex to the base, and, since the triangle is isosceles, it will also be a median. So it forms a right triangle with hypotenuse $5$ and one leg $3$, and thus the other leg, the altitude, is $4$. The area of the triangle is then $\frac{4(6)}{2}=12$. Since there are $4$ triangular faces, the total area is $4(12)=\boxed{48}$.
|
human
|
A square and four circles, each with a radius of 5 inches, are arranged as shown. What is the area, in square inches, of the square? [asy]
unitsize(1mm);
defaultpen(linewidth(0.7pt));
draw((0,0)--(20,0)--(20,20)--(0,20)--cycle);
draw(Circle((5,5),5));
draw(Circle((15,5),5));
draw(Circle((5,15),5));
draw(Circle((15,15),5));
[/asy]
|
gpt
|
The side length of the square is equal to twice the diameter of one of the circles, so the area of the square is $(20\text{ in})(20\text{ in})=\boxed{400}$ square inches.
|
human
|
Two identical rectangular crates are packed with cylindrical pipes, using different methods. Each pipe has diameter $10\text{ cm}.$ A side view of the first four rows of each of the two different methods of packing is shown below.
[asy]
draw(circle((1,1),1),black+linewidth(1));
draw(circle((3,1),1),black+linewidth(1));
draw(circle((5,1),1),black+linewidth(1));
draw(circle((7,1),1),black+linewidth(1));
draw(circle((9,1),1),black+linewidth(1));
draw(circle((11,1),1),black+linewidth(1));
draw(circle((13,1),1),black+linewidth(1));
draw(circle((15,1),1),black+linewidth(1));
draw(circle((17,1),1),black+linewidth(1));
draw(circle((19,1),1),black+linewidth(1));
draw(circle((1,3),1),black+linewidth(1));
draw(circle((3,3),1),black+linewidth(1));
draw(circle((5,3),1),black+linewidth(1));
draw(circle((7,3),1),black+linewidth(1));
draw(circle((9,3),1),black+linewidth(1));
draw(circle((11,3),1),black+linewidth(1));
draw(circle((13,3),1),black+linewidth(1));
draw(circle((15,3),1),black+linewidth(1));
draw(circle((17,3),1),black+linewidth(1));
draw(circle((19,3),1),black+linewidth(1));
draw(circle((1,5),1),black+linewidth(1));
draw(circle((3,5),1),black+linewidth(1));
draw(circle((5,5),1),black+linewidth(1));
draw(circle((7,5),1),black+linewidth(1));
draw(circle((9,5),1),black+linewidth(1));
draw(circle((11,5),1),black+linewidth(1));
draw(circle((13,5),1),black+linewidth(1));
draw(circle((15,5),1),black+linewidth(1));
draw(circle((17,5),1),black+linewidth(1));
draw(circle((19,5),1),black+linewidth(1));
draw(circle((1,7),1),black+linewidth(1));
draw(circle((3,7),1),black+linewidth(1));
draw(circle((5,7),1),black+linewidth(1));
draw(circle((7,7),1),black+linewidth(1));
draw(circle((9,7),1),black+linewidth(1));
draw(circle((11,7),1),black+linewidth(1));
draw(circle((13,7),1),black+linewidth(1));
draw(circle((15,7),1),black+linewidth(1));
draw(circle((17,7),1),black+linewidth(1));
draw(circle((19,7),1),black+linewidth(1));
draw((0,15)--(0,0)--(20,0)--(20,15),black+linewidth(1));
dot((10,9));
dot((10,11));
dot((10,13));
label("Crate A",(10,0),S);
[/asy]
[asy]
draw(circle((1,1),1),black+linewidth(1));
draw(circle((3,1),1),black+linewidth(1));
draw(circle((5,1),1),black+linewidth(1));
draw(circle((7,1),1),black+linewidth(1));
draw(circle((9,1),1),black+linewidth(1));
draw(circle((11,1),1),black+linewidth(1));
draw(circle((13,1),1),black+linewidth(1));
draw(circle((15,1),1),black+linewidth(1));
draw(circle((17,1),1),black+linewidth(1));
draw(circle((19,1),1),black+linewidth(1));
draw(circle((2,2.75),1),black+linewidth(1));
draw(circle((4,2.75),1),black+linewidth(1));
draw(circle((6,2.75),1),black+linewidth(1));
draw(circle((8,2.75),1),black+linewidth(1));
draw(circle((10,2.75),1),black+linewidth(1));
draw(circle((12,2.75),1),black+linewidth(1));
draw(circle((14,2.75),1),black+linewidth(1));
draw(circle((16,2.75),1),black+linewidth(1));
draw(circle((18,2.75),1),black+linewidth(1));
draw(circle((1,4.5),1),black+linewidth(1));
draw(circle((3,4.5),1),black+linewidth(1));
draw(circle((5,4.5),1),black+linewidth(1));
draw(circle((7,4.5),1),black+linewidth(1));
draw(circle((9,4.5),1),black+linewidth(1));
draw(circle((11,4.5),1),black+linewidth(1));
draw(circle((13,4.5),1),black+linewidth(1));
draw(circle((15,4.5),1),black+linewidth(1));
draw(circle((17,4.5),1),black+linewidth(1));
draw(circle((19,4.5),1),black+linewidth(1));
draw(circle((2,6.25),1),black+linewidth(1));
draw(circle((4,6.25),1),black+linewidth(1));
draw(circle((6,6.25),1),black+linewidth(1));
draw(circle((8,6.25),1),black+linewidth(1));
draw(circle((10,6.25),1),black+linewidth(1));
draw(circle((12,6.25),1),black+linewidth(1));
draw(circle((14,6.25),1),black+linewidth(1));
draw(circle((16,6.25),1),black+linewidth(1));
draw(circle((18,6.25),1),black+linewidth(1));
draw((0,15)--(0,0)--(20,0)--(20,15),black+linewidth(1));
dot((10,9));
dot((10,11));
dot((10,13));
label("Crate B",(10,0),S);
[/asy]
Three pipes from Crate $B$ are shown. Determine the height, $h,$ of this pile of $3$ pipes.
[asy]
draw(circle((10,10),10),black+linewidth(1));
draw(circle((30,10),10),black+linewidth(1));
draw(circle((20,27.5),10),black+linewidth(1));
draw((50,0)--(50,37.5),black+linewidth(1));
draw((49,0)--(51,0),black+linewidth(1));
draw((49,37.5)--(51,37.5),black+linewidth(1));
label("$h$",(50,0)--(50,37.5),E);
[/asy]
|
gpt
|
Join the centres $A,$ $B,$ and $C$ of the three circles. The lines $AB,$ $BC,$ and $CA$ will pass through the points where the circles touch, so will each have length $10\text{ cm}$ (that is, twice the radius of one of the circles).
We can break the height of the pile into three pieces: the distance from the bottom of the pile to the line $BC,$ the height of the equilateral triangle $ABC,$ and the distance $A$ to the top of the pile.
[asy]
draw(circle((10,10),10),black+linewidth(1));
draw(circle((30,10),10),black+linewidth(1));
draw(circle((20,27.5),10),black+linewidth(1));
draw((-10,0)--(50,0),black+linewidth(1));
draw((-10,37.5)--(50,37.5),black+linewidth(1));
draw((53,0)--(53,37.5),black+linewidth(1));
draw((52,0)--(54,0),black+linewidth(1));
draw((52,37.5)--(54,37.5),black+linewidth(1));
label("$h$",(53,0)--(53,37.5),E);
draw((10,10)--(30,10)--(20,27.5)--cycle,black+linewidth(1));
draw((10,10)--(10,0),black+linewidth(1));
draw((20,27.5)--(20,37.5),black+linewidth(1));
label("$A$",(20,27.5),W);
label("$B$",(10,10),W);
label("$C$",(30,10),E);
label("5",(10,10)--(10,0),E);
label("5",(20,27.5)--(20,37.5),E);
[/asy]
The first and last of these distances are each equal to the radius of one of the circles, that is, $5\text{ cm}.$ So we must determine the height of $\triangle ABC,$ which is an equilateral triangle with side length $10\text{ cm}.$ There are many ways to do this. Drop a perpendicular from $A$ to $P$ on $BC.$ Since $AB = AC,$ we know that $P$ is the midpoint of $BC,$ so $BP=5\text{ cm}.$
[asy]
draw((0,0)--(10,0)--(5,8.6603)--cycle,black+linewidth(1));
draw((5,0)--(5,8.6603),black+linewidth(1));
draw((5,0)--(4.5,0)--(4.5,0.5)--(5,0.5)--cycle,black+linewidth(1));
label("$A$",(5,8.6603),N);
label("$B$",(0,0),W);
label("$C$",(10,0),E);
label("$P$",(5,0),S);
label("5",(0,0)--(5,0),S);
label("10",(0,0)--(5,8.6603),NW);
[/asy]
Then $\triangle ABP$ is a $30^\circ$-$60^\circ$-$90^\circ$ triangle, so $AP=\sqrt{3}BP=5\sqrt{3}\text{ cm}.$ Thus, the height of the pile is $$5 + 5\sqrt{3} + 5 = \boxed{10 + 5\sqrt{3}}\text{ cm.}$$
|
human
|
Compute $\sin 60^\circ$.
|
gpt
|
Let $P$ be the point on the unit circle that is $60^\circ$ counterclockwise from $(1,0)$, and let $D$ be the foot of the altitude from $P$ to the $x$-axis, as shown below.
[asy]
pair A,C,P,O,D;
draw((0,-1.2)--(0,1.2),p=black+1.2bp,Arrows(0.15cm));
draw((-1.2,0)--(1.2,0),p=black+1.2bp,Arrows(0.15cm));
A = (1,0);
O= (0,0);
label("$x$",(1.2,0),SE);
label("$y$",(0,1.2),NE);
P = rotate(60)*A;
D = foot(P,A,-A);
draw(O--P--D);
draw(rightanglemark(O,D,P,2));
draw(Circle(O,1));
label("$O$",O,SE);
label("$P$",P,NE);
//label("$A$",A,SE);
label("$D$",D,S);
[/asy]
Triangle $POD$ is a 30-60-90 triangle, so $DO = \frac{1}{2}$ and $DP = \frac{\sqrt{3}}{2}$. Therefore, the coordinates of $P$ are $\left(\frac{1}{2}, \frac{\sqrt{3}}{2}\right)$, so $\sin 60^\circ = \boxed{\frac{\sqrt{3}}{2}}$.
|
human
|
Two concentric circles are centered at point P. The sides of a 45 degree angle at P form an arc on the smaller circle that is the same length as an arc on the larger circle formed by the sides of a 36 degree angle at P. What is the ratio of the area of the smaller circle to the area of the larger circle? Express your answer as a common fraction.
|
gpt
|
Let $C_1$ and $C_2$ be the circumferences of the smaller and larger circle, respectively. The length of the $45^\circ$ arc on the smaller circle is $\left(\frac{45^\circ}{360^\circ}\right)C_1$, and the length of the $36^\circ$ arc on the larger circle is $\left(\frac{36^\circ}{360^\circ}\right)C_2$. Setting these two lengths equal we find \[
\frac{C_1}{C_2}=\frac{36}{45}=\frac{4}{5}.
\]The ratio of the areas of the two circles is the square of the ratio of their circumferences: \[
\frac{\pi r_1^2}{\pi r_2^2}=\left(\frac{r_1}{r_2}\right)^2=\left(\frac{2\pi r_1}{2\pi r_2}\right)^2=\left(\frac{C_1}{C_2}\right)^2=\left(\frac{4}{5}\right)^2=\boxed{\frac{16}{25}}.
\]
|
human
|
Compute $\sin 225^\circ$.
|
gpt
|
Let $P$ be the point on the unit circle that is $225^\circ$ counterclockwise from $(1,0)$, and let $D$ be the foot of the altitude from $P$ to the $x$-axis, as shown below.
[asy]
pair A,C,P,O,D;
draw((0,-1.2)--(0,1.2),p=black+1.2bp,Arrows(0.15cm));
draw((-1.2,0)--(1.2,0),p=black+1.2bp,Arrows(0.15cm));
A = (1,0);
O= (0,0);
label("$x$",(1.2,0),SE);
label("$y$",(0,1.2),NE);
P = rotate(225)*A;
D = foot(P,A,-A);
draw(O--P--D);
draw(rightanglemark(O,D,P,2));
draw(Circle(O,1));
label("$O$",O,NE);
label("$P$",P,SW);
//label("$A$",A,SE);
label("$D$",D,N);
[/asy]
Triangle $POD$ is a 45-45-90 triangle, so $DO = DP = \frac{\sqrt{2}}{2}$. Therefore, the coordinates of $P$ are $\left(-\frac{\sqrt{2}}{2}, -\frac{\sqrt{2}}{2}\right)$, so $\sin 225^\circ = \boxed{-\frac{\sqrt{2}}{2}}$.
|
human
|
Let $AB$ be a diameter of a circle centered at $O$. Let $E$ be a point on the circle, and let the tangent at $B$ intersect the tangent at $E$ and $AE$ at $C$ and $D$, respectively. If $\angle BAE = 43^\circ$, find $\angle CED$, in degrees.
[asy]
import graph;
unitsize(2 cm);
pair O, A, B, C, D, E;
O = (0,0);
A = (0,1);
B = (0,-1);
E = dir(-6);
D = extension(A,E,B,B + rotate(90)*(B));
C = extension(E,E + rotate(90)*(E),B,B + rotate(90)*(B));
draw(Circle(O,1));
draw(B--A--D--cycle);
draw(B--E--C);
label("$A$", A, N);
label("$B$", B, S);
label("$C$", C, S);
label("$D$", D, SE);
label("$E$", E, dir(0));
dot("$O$", O, W);
[/asy]
|
gpt
|
Both angles $\angle BAD$ and $\angle CBE$ subtend arc $BE$, so $\angle CBE = \angle BAE = 43^\circ$. Triangle $BCE$ is isosceles with $BC = CE$, since these are tangent from the same point to the same circle, so $\angle CEB = \angle CBE = 43^\circ$.
Finally, $\angle AEB = 90^\circ$ since $AB$ is a diameter, so $\angle BED = 90^\circ$. Therefore, $\angle CED = \angle BED - \angle BEC = 90^\circ - 43^\circ = \boxed{47^\circ}$.
|
human
|
Brad has a cylindrical barrel with radius 10 inches and height 15 inches. He wants to fill it from a well, using a bucket in the shape of a hemisphere with a radius of 10 inches. How many trips must Brad make to the well in order to fill the barrel?
|
gpt
|
We start by finding the volume of the bucket and the volume of the barrel. Let $r$ be ten inches. The bucket is half of a sphere of radius $r$, so the volume it can hold is \[ \frac{1}{2} \cdot \frac{4}{3} \pi r^3 = \frac{2}{3} \pi r^3 . \]On the other hand, the barrel is a cylinder of radius $r$ and height $15 \text{ in} = \frac{3}{2} r$, so its volume is \[ \pi r^2 \cdot \text{height} = \frac{3}{2} \pi r^3 . \]Therefore the ratio of the volume of the barrel to the volume of the bucket is \[ \frac{(3/2) \pi r^3}{(2/3) \pi r^3} = \frac{9}{4}
= 2 + \frac{1}{4} . \]Thus two buckets will not suffice to fill the barrel, but three will, so Brad needs $\boxed{3}$ trips to the well.
|
human
|
Triangle ABC is an equilateral triangle and O is the center of its inscribed circle. If the area of the circle is $4\pi$ sq cm, what is the area, in square centimeters, of triangle ABC? Express your answer in simplest radical form.
Note: The area of a circle with radius $r$ is $\pi r^2.$
|
gpt
|
First, we note that the radius of the inscribed circle is 2 cm (since $\pi r^2 = 4\pi$ implies that $r=2$, given that $r$ is nonnegative).
Let $X$ be the midpoint of side $BC$. Thus segment $OX$ is a radius of the inscribed circle: [asy]
unitsize(16);
draw(Circle((0,0),2));
draw(((-2*sqrt(3),-2)--(2*sqrt(3),-2)--(0,4)--cycle));
draw(((0,0)--(0,-2)));
draw(((-sqrt(3),1)--(0,0)--(sqrt(3),1)));
dot((0,4)); label("A",(0,4),N);
dot((-2*sqrt(3),-2)); label("B",(-2*sqrt(3),-2),SW);
dot((2*sqrt(3),-2)); label("C",(2*sqrt(3),-2),SE);
dot((0,0)); label("O",(0,0),N);
dot((0,-2)); label("X",(0,-2),S);
dot((-sqrt(3),1)); dot((sqrt(3),1));
label("2",(0,-1),E);
[/asy] Then $COX$ is a $30^\circ$-$60^\circ$-$90^\circ$ triangle, so the sides $OX$, $CX$, and $CO$ are in the ratio $1:\sqrt3:2$. Since $OX=2$, we have $CX=2\sqrt 3$.
Triangle $ACX$ is also a $30^\circ$-$60^\circ$-$90^\circ$ triangle, so the sides $CX$, $AX$, and $AC$ are in the ratio $1:\sqrt3:2$. Thus, $AX=(2\sqrt3)(\sqrt 3)=6$.
Triangle $ABC$ has base $BC = 2(XC) = 4\sqrt 3$ and corresponding height $AX = 6$, so its area is $\frac{1}{2}(4\sqrt 3)(6) = \boxed{12\sqrt 3}$.
|
human
|
A telephone pole is supported by a steel cable which extends from the top of the pole to a point on the ground 3 meters from its base. When Leah walks 2.5 meters from the base of the pole toward the point where the cable is attached to the ground, her head just touches the cable. Leah is 1.5 meters tall. How many meters tall is the pole?
|
gpt
|
First, let us draw a diagram (not to scale!): [asy]
pair A,B,C,D,E;
A=(0,0);
B=(0,4.5);
C=(6,0);
D=(5,0);
E=(5,0.75);
draw(A--B--C--cycle);
draw(D--E);
label("A",A,W);
label("B",B,W);
label("C",C+(0.4,0));
label("D",D, NW);
label("E",E+(0.3,0.2));
[/asy] Here, $AB$ is the telephone pole and $C$ is the point in the ground where the cable $BC$ is anchored. The key is to recognize that $ABC$ is a right triangle since the telephone pole is upright. Meanwhile, Leah stands at $D$ and touches the cable at $E,$ so $DEC$ is another right triangle. Not only that, but we see that $\triangle ABC \sim \triangle DEC$ thanks to AA similarity.
From the problem, We have that $DE = 1.5\text{m},$ $AC = 3\text{m},$ and $AD = 2.5\text{m}.$ Therefore, $DC = AC - AD = 0.5\text{m}.$ We desire $AB.$ From $\triangle ABC \sim \triangle DEC,$ we get:
\begin{align*}
\frac{AB}{AC} &= \frac{DE}{DC} \\
\frac{AB}{3\text{m}} &= \frac{1.5\text{m}}{0.5\text{m}} = 3 \\
AB &= 3 \cdot 3\text{m} = \boxed{9}\text{ meters}.
\end{align*}
|
human
|
Suppose $\cos Q = 0.4$ in the diagram below. What is $QR$?
[asy]
pair P,Q,R;
P = (0,0);
Q = (6,0);
R = (0,6*tan(acos(0.4)));
draw(P--Q--R--P);
draw(rightanglemark(Q,P,R,18));
label("$P$",P,SW);
label("$Q$",Q,SE);
label("$R$",R,N);
label("$12$",Q/2,S);
[/asy]
|
gpt
|
Since $\cos Q = 0.4$ and $\cos Q = \frac{QP}{QR}=\frac{12}{QR}$, we have $\frac{12}{QR} = 0.4$, so $QR = \frac{12}{0.4} = \boxed{30}$.
|
human
|
When the height of a cylinder is doubled and its radius is increased by $200\%$, the cylinder's volume is multiplied by a factor of $X$. What is the value of $X$?
|
gpt
|
The cylinder's original volume is $\pi r^2h$. The new height is $2h$ and the new radius is $r+\frac{200}{100}r=3r$. That means the new volume is $\pi (3r)^2(2h)=\pi r^2h(9)(2)$. The new volume is the original volume multiplied by a factor of $\boxed{18}$.
|
human
|
A circle with radius 4 cm is tangent to three sides of a rectangle, as shown. The area of the rectangle is twice the area of the circle. What is the length of the longer side of the rectangle, in centimeters? Express your answer in terms of $\pi$.
[asy]
import graph;
draw((0,0)--(30,0)--(30,20)--(0,20)--cycle);
draw(Circle((10,10),10));
[/asy]
|
gpt
|
If the circle has radius 4, its area is $16\pi$. Thus, the area of the rectangle is $32\pi$.
The length of the shorter side of the rectangle is equal to the diameter of the circle, so it is 8 centimeters long. This means that the length of the other side is $32\pi/8 = \boxed{4\pi}$.
|
human
|
In the diagram, $\angle PQR=\angle PRQ$. If $QR=5$ and $PR=7$, what is the perimeter of $\triangle PQR$? [asy]
draw((0,0)--(2.5,7.43)--(5,0)--cycle);
label("5",(2.5,0),S);
label("$Q$",(0,0),SW);
label("$R$",(5,0),SE);
label("$P$",(2.5,7.43),N);
label("7",(4.2,3.7));
[/asy]
|
gpt
|
Since $\angle PQR=\angle PRQ$, then $\triangle PQR$ is an isosceles triangle and $PQ=PR=7$. Therefore, the perimeter of $\triangle PQR$ is $PQ+QR+PR=7+5+7=\boxed{19}$.
|
human
|
The formula for the total surface area of a cylinder is $SA = 2\pi r^2 + 2\pi rh,$ where $r$ is the radius and $h$ is the height. A particular solid right cylinder of radius 2 feet has a total surface area of $12\pi$ square feet. What is the height of this cylinder?
|
gpt
|
Let the height of the cylinder be $h$; we then have \[SA = 2\pi (2^2)+2\pi (2)(h) = 12\pi.\]Solving yields $4\pi h = 4 \pi$ so $h = \boxed{1}$ foot.
|
human
|
Two sides of a triangle measure 4 cm and 9 cm. What is the greatest integer number of centimeters that could be the third side of this triangle?
|
gpt
|
Using the Triangle Inequality, we see that the third side must be smaller than the sum of the first two sides, or 13 cm. That means the greatest integer number of centimeters for the third side is $\boxed{12}.$
|
human
|
Compute $\tan 3825^\circ$.
|
gpt
|
Rotating $360^\circ$ is the same as doing nothing, so rotating $3825^\circ$ is the same as rotating $3825^\circ - 10\cdot 360^\circ = 225^\circ$. Therefore, we have $\tan 3825^\circ = \tan (3825^\circ - 10\cdot 360^\circ) = \tan 225^\circ$.
Let $P$ be the point on the unit circle that is $225^\circ$ counterclockwise from $(1,0)$, and let $D$ be the foot of the altitude from $P$ to the $x$-axis, as shown below.
[asy]
pair A,C,P,O,D;
draw((0,-1.2)--(0,1.2),p=black+1.2bp,Arrows(0.15cm));
draw((-1.2,0)--(1.2,0),p=black+1.2bp,Arrows(0.15cm));
A = (1,0);
O= (0,0);
label("$x$",(1.2,0),SE);
label("$y$",(0,1.2),NE);
P = rotate(225)*A;
D = foot(P,A,-A);
draw(O--P--D);
draw(rightanglemark(O,D,P,2));
draw(Circle(O,1));
label("$O$",O,NE);
label("$P$",P,SW);
//label("$A$",A,SE);
label("$D$",D,N);
[/asy]
Triangle $POD$ is a 45-45-90 triangle, so $DO = DP = \frac{\sqrt{2}}{2}$. Therefore, the coordinates of $P$ are $\left(-\frac{\sqrt{2}}{2}, -\frac{\sqrt{2}}{2}\right)$, so $\tan 3825^\circ = \tan 225^\circ = \frac{\sin 225^\circ}{\cos 225^\circ} = \frac{-\sqrt{2}/2}{-\sqrt{2}/2} = \boxed{1}$.
|
human
|
A square and a circle intersect so that each side of the square contains a chord of the circle equal in length to the radius of the circle. What is the ratio of the area of the square to the area of the circle? Express your answer as a common fraction in terms of $\pi$.
|
gpt
|
Drawing a diagram and adding $OM$ perpendicular to $AD$, we get
[asy]
size(150);
pair O, A, B, C, D, E, F, M;
O=(0,0);
A=(-1,1);
B=(1,1);
C=(1,-1);
D=(-1,-1);
E=(-1,-.577);
F=(-1,.577);
M=(-1,0);
draw(circle(O,1.155));
draw(A--B);
draw(B--C);
draw(C--D);
draw(D--A);
draw(F--O);
draw(O--E);
draw(O--M);
label("A", A, NW);
label("B", B, NE);
label("C", C, SE);
label("D", D, SW);
label("E", E, SW);
label("F", F, NW);
label("O", O, dir(0));
label("M", M, NE);
label("$r$", (F+O)/2, NE);
label("$r$", (E+O)/2, SE);
label("$r$", M, W);
[/asy] First note that $O$ is not only the center of the circle but also the center of the square since the diagram is symmetric. Because the lengths of the sides of triangle $OEF$ are all the same, $OEF$ is equilateral. Thus, because $OM$ is the height of the equilateral triangle, $M$ is the midpoint of $EF$. Thus, the length of segment $EM$ is $\frac{r}{2}$. Because $EMO$ is a 30-60-90 right triangle, $MO=EM\cdot \sqrt{3}=\frac{r}{2} \cdot \sqrt{3}=\frac{r\sqrt{3}}{2}$. Because $OM$ is perpendicular to $AD$ and $O$ is the center of the square, $OM$ is half the length of a side of the square. Thus, the square has side length of $\frac{r\sqrt{3}}{\cancel{2}} \cdot \cancel{2}=r\sqrt{3}$.
Calculating the areas of both of the shapes we get $A_{circle}=\pi r^2$ and $A_{square}=s^2=(r\sqrt{3})^2=3r^2$. Thus, the ratio of the area of the square to the area of the circle is $\frac{3r^2}{\pi r^2}=\frac{3\cancel{r^2}}{\pi \cancel{r^2}}=\boxed{\frac{3}{\pi}}$.
|
human
|
A cylinder has a height of $10$ and a radius of $3.$ Determine the total surface area, including the two ends, of the cylinder. [asy]
draw(ellipse((5,0),5,2),black+linewidth(1));
draw(ellipse((5,10),5,2),black+linewidth(1));
draw((1,8.95)--(5,10),black+linewidth(1));
draw((0,0)--(0,10),black+linewidth(1));
draw((10,0)--(10,10),black+linewidth(1));
label("3",(1,8.95)--(5,10),NW);
label("10",(0,0)--(0,10),W);
[/asy]
|
gpt
|
To calculate the total surface area of the cylinder, we cut off the two ends to obtain two circles of radius $3.$
[asy]
draw(circle((3,3),3),black+linewidth(1));
draw((3,3)--(5.1213,3-2.1213),black+linewidth(1));
draw(circle((11,3),3),black+linewidth(1));
draw((11,3)--(13.1213,3-2.1213),black+linewidth(1));
label("3",(3,3)--(5.1213,3-2.1213),SW);
label("3",(11,3)--(13.1213,3-2.1213),SW);
[/asy]
The two ends combined have an area of $$2\pi r^2 = 2 \pi(3^2)=18\pi.$$ Next, we must calculate the lateral surface area. To do this, we make a vertical cut through this area, and unroll the lateral surface. When we do this, we obtain a rectangle with height $10.$ The width of the rectangle (ie. the length of the top edge) is equal to the circumference of one of the ends, since the top edge of this rectangle lay exactly along the circumference of the top end.
[asy]
draw((0,0)--(15,0)--(15,10)--(0,10)--cycle,black+linewidth(1));
label("10",(0,0)--(0,10),W);
[/asy]
The circumference of one of the ends is $$2\pi r = 2\pi(3)=6\pi,$$ so the width of the rectangle is $6\pi.$ Therefore, the area of this rectangle is $10\times 6\pi = 60\pi.$ So the total surface area of the cylinder is $18\pi + 60\pi = \boxed{78\pi}.$
|
human
|
The region shown is bounded by the arcs of circles having radius 4 units, having a central angle measure of 60 degrees and intersecting at points of tangency. The area of the region can be expressed in the form $a\sqrt{b}+c\pi$ square units, where $\sqrt{b}$ is a radical in simplest form. What is the value of $a + b + c$?
[asy]
size(150);
draw(arc((-2,0),2,0,60));
draw(arc((0,3.464),2,-60,-120));
draw(arc((2,0),2,120,180));
[/asy]
|
gpt
|
Consider point $A$ at the center of the diagram. Drawing in lines as shown below divides the region into 3 parts with equal areas. Because the full circle around point $A$ is divided into 3 angles of equal measure, each of these angles is 120 degrees in measure.
[asy]
size(150);
pair A, B, C, D;
A=(0,1.155);
B=(0,0);
C=(-1,1.732);
D=(1,1.732);
draw(arc((-2,0),2,0,60));
draw(arc((0,3.464),2,-60,-120));
draw(arc((2,0),2,120,180));
dot(A);
label("A", A, N);
draw(A--B);
draw(A--C);
draw(A--D);
[/asy] Now consider a circle of radius 4 inscribed inside a regular hexagon:
[asy]
size(150);
pair O, A, B, C, D, E, F, M;
O=(0,0);
A=(-4.619,0);
B=(-2.309,4);
C=(2.309,4);
D=(4.619,0);
E=(2.309,-4);
F=(-2.309,-4);
M=(A+B)/2;
draw(circle(O,4));
draw(A--B--C--D--E--F--A);
label("A", A, W);
label("B", B, NW);
label("O", O, SE);
label("C", C, NE);
label("D", D, E);
label("E", E, SE);
label("F", F, SW);
label("M", M, NW);
draw(A--O);
draw(B--O);
draw(M--O);
label("$4$", 3M/4, NE);
[/asy] Now, the pieces of area inside the hexagon but outside the circle are identical to the pieces of area the original region was divided into. There were 3 pieces in the original diagram, but there are 6 in the hexagon picture. Thus, the area of the original region is the half the area inside the hexagon but outside the circle.
Because $ABO$ is equilateral, $BMO$ is a 30-60-90 right triangle, so $BM=\frac{4}{\sqrt{3}}$. Thus, the side length of the equilateral triangle is $AB=2BM=\frac{8}{\sqrt{3}}$. Now we know the base $AB$ and the height $MO$ so we can find the area of triangle $ABO$ to be $\frac{1}{2} \cdot \frac{8}{\sqrt{3}} \cdot 4=\frac{16}{\sqrt{3}}=\frac{16\sqrt{3}}{3}$. The entirety of hexagon $ABCDEF$ can be divided into 6 such triangles, so the area of $ABCDEF$ is $\frac{16\sqrt{3}}{3} \cdot 6 = 32\sqrt{3}$. The area of the circle is $\pi 4^2=16\pi$. Thus, the area inside the heagon but outside the circle is $32\sqrt{3}-16\pi$. Thus, the area of the original region is $\frac{32\sqrt{3}-16\pi}{2}=16\sqrt{3}-8\pi$.
Now we have $a=16$, $b=3$ and $c=-8$. Adding, we get $16+3+(-8)=\boxed{11}$.
|
human
|
Triangle $ABC$ has sides of length 5, 12 and 13 units, and triangle $DEF$ has sides of length 8, 15 and 17 units. What is the ratio of the area of triangle $ABC$ to the area of triangle $DEF$? Express your answer as a common fraction.
|
gpt
|
Triangles $ABC$ and $DEF$ are both right, since their sides form Pythagorean triples. It follows that the desired ratio is $\dfrac{(5\cdot 12)/2}{(8\cdot 15)/2} = \boxed{\dfrac{1}{2}}$.
|
human
|
The radius of the inscribed circle is 6 cm. What is the number of centimeters in the length of $\overline{AB}$? Express your answer in simplest radical form. [asy]
import olympiad; import geometry; size(150); defaultpen(linewidth(0.8));
draw((sqrt(3),0)--origin--(0,1)--cycle);
real r1 = (sqrt(3) - 1)/2;
draw(Circle((r1,r1),r1));
label("$A$",(sqrt(3),0),SE);
label("$B$",(0,1),NW);
draw(rightanglemark((0,1),origin,(1,0),3));
label(scale(0.8)*"$60^\circ$",(0,0.9),SE);
[/asy]
|
gpt
|
Define points $C$, $D$, $E$, $F$ and $O$ as shown in the figure. Triangles $BCO$ and $BFO$ are right triangles that share a hypotenuse, and $CO=6\text{ cm}=OF$. By the hypotenuse-leg congruency theorem, triangles $BCO$ and $BFO$ are congruent. Therefore, angles $CBO$ and $FBO$ each measure 30 degrees, so angle $BOC$ measures 60 degrees. Since the ratio of the length of the longer leg to the length of the shorter leg in a 30-60-90 triangle is $\sqrt{3}$, $BC=CO\cdot\sqrt{3}=6\sqrt{3}$ cm. Also, angles $DCO$, $CDE$, and $DEO$ each measure 90 degrees, so angle $EOC$ measures 90 degrees as well and quadrilateral $CDEO$ is a rectangle. Therefore, $CD=OE=6$ cm. Summing $BC$ and $CD$, we have $BD=6+6\sqrt{3}$. Because triangle $ABD$ is a 30-60-90 triangle, we can double $BD$ to find $\boxed{AB=12+12\sqrt{3}}$ centimeters.
[asy]
import olympiad; import geometry; size(150); defaultpen(linewidth(0.8));
draw((sqrt(3),0)--origin--(0,1)--cycle);
real r1 = (sqrt(3) - 1)/2;
draw(Circle((r1,r1),r1));
label("$A$",(sqrt(3),0),SE);
label("$B$",(0,1),NW);
label("$O$",(r1,r1),ESE);
label("$C$",(0,r1),W);
label("$D$",(0,0),SW);
label("$E$",(r1,0),S);
label("$F$",(r1,r1)+r1*dir(60),dir(60));
draw(rightanglemark((0,1),origin,(1,0),3));
draw((r1,r1)+r1*dir(60)--(r1,r1)--(0,r1));
draw((r1,0)--(r1,r1)--(0,1));
draw((r1,r1)--(0,1));
[/asy]
|
human
|
In right triangle $DEF$, we have $\sin D = \frac{5}{13}$ and $\sin E = 1$. Find $\sin F$.
|
gpt
|
Since $\sin E = 1$, we have $\angle E = 90^\circ$, so our triangle is as shown below:
[asy]
pair D,EE,F;
EE = (0,0);
F = (5,0);
D = (0,12);
draw(D--EE--F--D);
draw(rightanglemark(F,EE,D,18));
label("$E$",EE,SW);
label("$F$",F,SE);
label("$D$",D,N);
[/asy]
Since $\sin D = \frac{5}{13}$, we have $\frac{EF}{DF} = \frac{5}{13}$, so $\cos F = \frac{EF}{DF} = \frac{5}{13}$. Since $\sin^2 F + \cos^2 F = 1$, and $\angle F$ is acute (so $\sin F$ is positive), we have \[\sin F =\sqrt{1 - \cos^2 F} = \sqrt{1 - \frac{25}{169}} = \sqrt{\frac{144}{169}} = \boxed{\frac{12}{13}}.\]We also could have noticed that since $\frac{EF}{DF} = \frac{5}{13}$, we have $EF = 5x$ and $DF = 13x$ for some value of $x$. Then, from the $\{5,12,13\}$ Pythagorean triple, we see that $DE = 12x$, so $\sin F = \frac{DE}{DF} = \frac{12}{13}$.
|
human
|
A solid right prism $ABCDEF$ has a height of 16, as shown. Also, its bases are equilateral triangles with side length 12. Points $X$, $Y$, and $Z$ are the midpoints of edges $AC$, $BC$, and $DC$, respectively. Determine the perimeter of triangle $XYZ$. [asy]
pair A, B, C, D, E, F, X, Y, Z;
A=(0,0);
B=(12,0);
C=(6,-6);
D=(6,-22);
E=(0,-16);
F=(12,-16);
X=(A+C)/2;
Y=(B+C)/2;
Z=(C+D)/2;
draw(A--B--C--A--E--D--F--B--C--D);
draw(X--Y--Z--X, dashed);
label("$A$", A, NW);
label("$B$", B, NE);
label("$C$", C, N);
label("$D$", D, S);
label("$E$", E, SW);
label("$F$", F, SE);
label("$X$", X, SW);
label("$Y$", Y, SE);
label("$Z$", Z, SE);
label("12", (A+B)/2, dir(90));
label("16", (B+F)/2, dir(0));
[/asy]
|
gpt
|
Since $\triangle ABC$ is equilateral with side length 12 and $X$ and $Y$ are the midpoints of $CA$ and $CB$ respectively, we have $CX=CY=\frac{1}{2}(12)=6$. Since the height of the prism is 16 and $Z$ is the midpoint of $CD$ we have $CZ = \frac{1}{2}(16)=8$.
We have $\angle ACD = \angle BCD = 90^\circ$ since faces $ACDE$ and $BCDF$ are rectangles. Thus, $\triangle XCZ$ and $\triangle YCZ$ are right-angled at $C$. By the Pythagorean Theorem, \[XZ = \sqrt{CX^2 + CZ^2} = \sqrt{6^2+8^2}=\sqrt{100}=10\]and \[YZ = \sqrt{CY^2 + CZ^2} = \sqrt{6^2 + 8^2} = \sqrt{100} = 10.\]Now we look at $\triangle CXY$. We know that $CX = CY = 6$ and that $\angle XCY = 60^\circ$, because $\triangle ABC$ is equilateral. Thus, $\triangle CXY$ is isosceles with $\angle CXY = \angle CYX$. These angles must each be equal to $\frac{1}{2}(180^\circ - \angle XCY) = \frac{1}{2}(180^\circ - 60^\circ)=60^\circ$. Thus $\triangle CXY$ is equilateral, so $XY = CX = CY = 6$.
Finally, $XY = 6$ and $XZ = YZ = 10$. The perimeter is then $10+10+6=\boxed{26}$.
|
human
|
In the diagram, $D$ and $E$ are the midpoints of $\overline{AB}$ and $\overline{BC}$ respectively. Determine the area of $\triangle DBC$.
[asy]
size(180); defaultpen(linewidth(.7pt)+fontsize(10pt));
pair A, B, C, D, E, F;
A=(0,6);
B=(0,0);
C=(8,0);
D=(0,3);
E=(4,0);
F=(8/3,2);
draw(E--A--C--D);
draw((-1,0)--(10,0), EndArrow);
draw((0,-1)--(0,8), EndArrow);
label("$A(0,6)$", A, W);
label("$B(0,0)$", B, SW);
label("$C(8,0)$", C, S);
label("$D$", D, W);
label("$E$", E, S);
label("$F$", F, SW);
label("$x$", (10,0), dir(0));
label("$y$", (0,8), dir(90));
[/asy]
|
gpt
|
$\triangle DBC$ has base $BC$ of length 8 and height $BD$ of length 3; therefore, its area is $\frac{1}{2}\times8\times 3=\boxed{12}$.
|
human
|
Two chords, $AB$ and $CD,$ meet inside a circle at $P.$ If $AP = 3$ and $CP = 8,$ then what is $\frac{BP}{DP}$?
|
gpt
|
By the Power of a Point formula, we know that $AP \cdot BP = CP \cdot DP.$ Substituting, we have $3 \cdot BP = 8 \cdot DP.$ Then, we have $\frac{BP}{DP} = \boxed{\frac{8}{3}}.$
|
human
|
In right triangle $ABC$, shown below, $\cos{C}=\frac{9\sqrt{130}}{130}$. Find $AC$.
[asy]
draw((0,0)--(7,0)--(0,9)--cycle,black+linewidth(1));
draw(rightanglemark((7,0),(0,0),(0,9),20),black+linewidth(1));
label("$A$",(0,0),W);
label("$B$",(7,0),E);
label("$C$",(0,9),W);
label("$\sqrt{130}$",(7,0)--(0,9),NE);
[/asy]
|
gpt
|
Since $\cos{C}=\frac{9\sqrt{130}}{130}$ and $\cos{C}=\frac{AC}{BC}$, we have $\frac{AC}{BC}=\frac{AC}{\sqrt{130}}=\frac{9\sqrt{130}}{130}$. This means that $AC=\frac{9\sqrt{130}}{130}\cdot\sqrt{130}=\frac{9\cdot\sqrt{130}\cdot\sqrt{130}}{130}=\boxed{9}$.
|
human
|
A truncated cone has horizontal bases with radii 18 and 2. A sphere is tangent to the top, bottom, and lateral surface of the truncated cone. What is the radius of the sphere?
|
gpt
|
Let $\overline{AB}$ and $\overline{DC}$ be parallel diameters of the bottom and top bases, respectively. A great circle of the sphere is tangent to all four sides of trapezoid $ABCD$. Let $E,F$, and $G$ be the points of tangency on $\overline{AB}$, $\overline{BC}$, and $\overline{CD}$, respectively. Then \[
FB= EB= 18 \quad\text{and}\quad FC= GC= 2,
\]so $BC=20$. If $H$ is on $\overline{AB}$ such that $\angle CHB$ is a right angle, then $HB= 18-2=16.$ Thus \[
CH=\sqrt{20^{2}-16^{2}}=12,
\]and the radius of the sphere is $(1/2)(12)=\boxed{6}$.
[asy]
unitsize(0.2cm);
pair A,B,C,D,I,F,G,H;
A=(0,0);
B=(36,0);
I=(18,0);
H=(20,0);
D=(16,12);
C=(20,12);
G=(18,12);
F=(21.6,10.8);
dot(F);
dot(I);
dot(G);
draw(Circle((18,6),6),linewidth(0.7));
draw(A--B--C--D--cycle,linewidth(0.7));
draw(G--I,linewidth(0.7));
draw(C--H,linewidth(0.7));
label("2",(19,12),N);
draw((20,-2)--(36,-2));
draw((18,-4)--(36,-4));
draw((20,-2.5)--(20,-1.5));
draw((36,-2.5)--(36,-1.5));
draw((18,-3.5)--(18,-4.5));
draw((36,-3.5)--(36,-4.5));
label("{\tiny 16}",(28,-2),S);
label("{\tiny 18}",(27,-4),S);
label("12",(20,6),E);
label("$E$",I,S);
label("{\tiny $H$}",H,SE);
label("$B$",B,SE);
label("$F$",F,NE);
label("$C$",C,NE);
label("$G$",G,SW);
label("$D$",D,NW);
label("$A$",A,S);
[/asy]
|
human
|
A rectangular box $P$ is inscribed in a sphere of radius $r$. The surface area of $P$ is 384, and the sum of the lengths of its 12 edges is 112. What is $r$?
|
gpt
|
Let the dimensions of $P$ be $x$, $y$, and $z$. The sum of the lengths of the edges of $P$ is $4(x+y+z)$, and the surface area of $P$ is $2xy+2yz+2xz$, so \[
x+y+z=28 \quad\text{and}\quad 2xy+2yz+2xz=384.
\] Each internal diagonal of $P$ is a diameter of the sphere, so \begin{align*}
(2r)^2&=(x^2+y^2+z^2)\\
&=(x+y+z)^2-(2xy+2xz+2yz) \\
&= 28^2-384\\& = 400.
\end{align*} So $2r = 20$ and $r=\boxed{10}$.
Note: There are infinitely many positive solutions of the system $x+y+z=28$, $2xy+2yz+2xz=384$, so there are infinitely many non-congruent boxes meeting the given conditions, but each can be inscribed in a sphere of radius 10.
|
human
|
In parallelogram $ABCD$, $AB = 38$ cm, $BC = 3y^3$ cm, $CD = 2x +4$ cm, and $AD = 24$ cm. What is the product of $x$ and $y$?
|
gpt
|
Since opposite sides of a parallelogram have the same length, we have the equations $$AB=CD\qquad\Rightarrow \qquad38=2x+4\qquad\Rightarrow \qquad x=17$$and $$BC=AD\qquad\Rightarrow \qquad3y^3=24\qquad\Rightarrow\qquad y=2.$$The product of $x$ and $y$ is then $17\cdot2=\boxed{34}$.
|
human
|
In a circle with center $O$, $AD$ is a diameter, $ABC$ is a chord, $BO = 5$, and $\angle ABO = \text{arc } CD = 60^\circ$. Find the length of $BC$.
[asy]
import graph;
unitsize(2 cm);
pair O, A, B, C, D;
O = (0,0);
A = dir(30);
C = dir(160);
B = (2*C + A)/3;
D = -A;
draw(Circle(O,1));
draw(C--A--D);
draw(B--O);
label("$A$", A, NE);
label("$B$", B, N);
label("$C$", C, W);
label("$D$", D, SW);
label("$O$", O, SE);
[/asy]
|
gpt
|
Since arc $CD$ is $60^\circ$, $\angle CAD = 60^\circ/2 = 30^\circ$. Since triangle $AOC$ is isosceles with $AO = CO$, $\angle OCA = \angle OAC = 30^\circ$.
[asy]
import graph;
unitsize(2 cm);
pair O, A, B, C, D;
O = (0,0);
A = dir(30);
C = dir(160);
B = (2*C + A)/3;
D = -A;
draw(Circle(O,1));
draw(C--A--D);
draw(B--O);
draw(C--O);
label("$A$", A, NE);
label("$B$", B, N);
label("$C$", C, W);
label("$D$", D, SW);
label("$O$", O, SE);
[/asy]
Since $\angle ABO = 60^\circ$, and this angle is external to triangle $BCO$, $\angle BOC = \angle ABO - \angle BCO = 60^\circ - 30^\circ = 30^\circ$. Hence, triangle $BCO$ is isosceles, and $BC = BO = \boxed{5}$.
|
human
|
In regular octagon $ABCDEFGH$, $M$ and $N$ are midpoints of $\overline{BC}$ and $\overline{FG}$ respectively. Compute $[ABMO]/[EDCMO]$. ($[ABCD]$ denotes the area of polygon $ABCD$.) [asy]
pair A,B,C,D,E,F,G,H;
F=(0,0); E=(2,0); D=(2+sqrt(2),sqrt(2)); C=(2+sqrt(2),2+sqrt(2));
B=(2,2+2sqrt(2)); A=(0,2+2*sqrt(2)); H=(-sqrt(2),2+sqrt(2)); G=(-sqrt(2),sqrt(2));
draw(A--B--C--D--E--F--G--H--cycle);
draw(A--E);
pair M=(B+C)/2; pair N=(F+G)/2;
draw(M--N);
label("$A$",A,N); label("$B$",B,NE); label("$C$",C,E); label("$D$",D,E);
label("$E$",E,S); label("$F$",F,S); label("$G$",G,W); label("$H$",H,W);
label("$M$",M,NE); label("$N$",N,SW);
label("$O$",(1,2.4),E);
[/asy]
|
gpt
|
We connect the midpoints of all opposite sides and we connect all opposite vertices: [asy]
pair A,B,C,D,E,F,G,H;
F=(0,0); E=(2,0); D=(2+sqrt(2),sqrt(2)); C=(2+sqrt(2),2+sqrt(2));
B=(2,2+2sqrt(2)); A=(0,2+2*sqrt(2)); H=(-sqrt(2),2+sqrt(2)); G=(-sqrt(2),sqrt(2));
draw(A--B--C--D--E--F--G--H--cycle);
draw(A--E);
pair M=(B+C)/2; pair N=(F+G)/2;
draw(M--N);
label("$A$",A,N); label("$B$",B,NE); label("$C$",C,E); label("$D$",D,E);
label("$E$",E,S); label("$F$",F,S); label("$G$",G,W); label("$H$",H,W);
label("$M$",M,NE); label("$N$",N,SW);
label("$O$",(1,2.4),E);
pair X=(C+D)/2; pair Y=(G+H)/2; pair Z=(E+F)/2; pair W=(A+B)/2;
draw(Z--W,gray); draw(X--Y,gray); draw(B--F,gray); draw(C--G,gray); draw(D--H,gray); pair I=(D+E)/2; pair J=(A+H)/2; draw(I--J,gray);
[/asy]
Because of symmetry, these lines split the octagon into 16 congruent regions. Quadrilateral $ABMO$ is made up of three of these regions and pentagon $EDCMO$ is made up of five of these regions. Hence, $[ABMO]/[EDCMO] = \boxed{\frac{3}{5}}$.
|
human
|
A stick 5 cm long, a stick 9 cm long, and a third stick $n$ cm long form a triangle. What is the sum of all possible whole number values of $n$?
|
gpt
|
Using the Triangle Inequality, we see that $n > 4$ and $n < 14,$ so $n$ can be any integer from $5$ to $13,$ inclusive. The sum can be calculated in several ways, but regardless, $5 + 6 + 7 + 8 + 9 + 10 + 11 + 12 + 13 = \boxed{81}.$
|
human
|
Circles of radius 2 and 3 are externally tangent and are circumscribed by a third circle, as shown in the figure. Find the area of the shaded region. Express your answer in terms of $\pi$.
[asy]
fill(Circle((-1,0),5),gray(0.7));
fill(Circle((-3,0),3),white);
fill(circle((2,0),2),white);
dot((-3,0));
dot((2,0));
draw(Circle((-1,0),5));
draw((-3,0)--(0,0));
draw((2,0)--(4,0));
label("3",(-1.5,0),N);
label("2",(3,0),N);
draw(Circle((-3,0),3));
draw(Circle((2,0),2));
[/asy]
|
gpt
|
The diameter of the large circle is $6+4=10$, so its radius is 5. Hence, the area of the shaded region is $$
\pi(5^2)-\pi(3^2)-\pi(2^2)=\pi(25-9-4)=\boxed{12\pi}.
$$
|
human
|
$ABCD$ is a trapezoid with the measure of base $\overline{AB}$ twice the measure of the base $\overline{CD}$. Point $E$ is the point of intersection of the diagonals. The measure of diagonal $\overline{AC}$ is 11. Find the length of segment $\overline{EC}$. Express your answer as a common fraction.
[asy]
size(200);
pair p1,p2,p3,p4;
p1 = (0,0); p2 = (2.5, 4); p3 = (7.5,4); p4 = (10,0);
draw(p1--p2--p3--p4--cycle);
draw(p1--p3); draw(p2--p4);
label("$A$", p1, SW);
label("$D$", p2, NW);
label("$C$", p3, NE);
label("$B$", p4, SE);
label("$E$", (5,2.5) , S);
[/asy]
|
gpt
|
Since the bases of the trapezoid are $\overline{AB}$ and $\overline{CD}$, these two line segments must be parallel. Now, since $\overline{AC}$ intersects these two parallel lines, $\angle DCE$ and $\angle BAE$ are alternate interior angles and therefore must be congruent. Similarly, $\overline{DB}$ intersects the bases, so $\angle CDE$ and $\angle ABE$ are congruent. We have two pairs of congruent angles, so $\triangle DCE \sim \triangle BAE$ by the Angle-Angle Similarity Theorem.
Sides of similar triangles are proportional, so since the lengths of sides $\overline{AB}$ and $\overline{CD}$ are related in a $2:1$ proportion, we also have that $EA/EC=2/1$, so the length of $\overline{EC}$ must be $1/3$ that of $\overline{AC}$. Since $\overline{AC}$ has length $11$, $\overline{EC}$ must have length $\dfrac{1}{3} \cdot 11 = \boxed{\dfrac{11}{3}}$.
|
human
|
The area of the base of a hemisphere is $100\pi$. What is the total surface area of the hemisphere? Express your answer in terms of $\pi$.
|
gpt
|
Let the hemisphere's radius be $r$. The hemisphere's base is a circle with radius $r$; thus, we have $\pi r^2 = 100\pi$. Taking the positive solution for $r$ yields $r = 10$. The surface area of the curved part of the hemisphere is half the surface area of a sphere with radius 10, which is $\frac{1}{2} \cdot 4\pi (10^2) = 200\pi$. The total surface area of the hemisphere is the sum of this curved surface area and the base area, which is $200\pi+100\pi=\boxed{300\pi}$.
|
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.