chunk_id string | chunk string |
|---|---|
528004ecee89a54f4c7e5d842bac68c9_0 | IBM WebSphere Portal V6.1.0.5 and V6.1.5.2 hardware and software requirements - AIX - United States DSRdoc; SystemRequirementsDocument; prereq; coreq; installation prerequisites; 6105eGA 6152eGA V6105 V6.1.0.5 6.1.0.5 6105 6152 PRODUCT DOCUMENTATION
ABSTRACT
IBM WebSphere Portal V6.1.0.5 and 6.1.5.2 hardware and software requirements on an AIX operating system. The hardware and software requirements reflect the versions of prerequisites and corequisites that were tested with WebSphere Portal V6.1.0.5 and 6.1.5.2.
CONTENT
TAB NAVIGATION
* AIX [http://www.ibm.com/support/docview.wss?uid=swg27019359]
* i5/OS [http://www.ibm.com/support/docview.wss?uid=swg27019362]
* Windows [http://www.ibm.com/support/docview.wss?uid=swg27019366]
IBM AIX
WebSphere Portal Server Version 6.1.0.5 and 6.1.5.2 (AIX) |
528004ecee89a54f4c7e5d842bac68c9_1 | This page describes the minimum product levels that need to be installed before opening a problem report with IBM WebSphere Portal Technical Support. The software versions and any maintenance levels listed on this page have been explicitly verified as working.
EARLIER LEVEL OF A LISTED SOFTWARE: Software versions at a lower level than those noted on this page are unsupported. LDAP software at an earlier level is considered untested and best effort support only. For more details and exceptions, refer to the WebSphere Portal 6.1.x Support Statement [http://publib.boulder.ibm.com/infocenter/wpdoc/v6r1m0/topic/com.ibm.wp.ent.doc_v6101/overview/inst_req_supt.html]. Also see the listing of software explicitly not supported for use with WebSphere Portal 6.1.x in WebSphere Portal Support Statement Addendum - Unsupported Products [http://www.ibm.com/support/docview.wss?rs=688&uid=swg27012957] (#7012957 [http://www.ibm.com/support/docview.wss?rs=688&uid=swg27012957]). |
528004ecee89a54f4c7e5d842bac68c9_2 | LATER LEVEL OF A LISTED SOFTWARE: Because other products frequently ship fixes, updates, and new releases, testing every configuration is not possible. In general, you can install and run with updates to supported products if those updates are compatible with the tested versions. For more details and exceptions, refer to the WebSphere Portal 6.1.x Support Statement [http://publib.boulder.ibm.com/infocenter/wpdoc/v6r1m0/topic/com.ibm.wp.ent.doc_v6101/overview/inst_req_supt.html]. Also see the listing of software explicitly not supported for use with WebSphere Portal 6.1.x in WebSphere Portal Support Statement Addendum - Unsupported Products [http://www.ibm.com/support/docview.wss?rs=688&uid=swg27012957] (#7012957 [http://www.ibm.com/support/docview.wss?rs=688&uid=swg27012957]). |
528004ecee89a54f4c7e5d842bac68c9_3 | UNLISTED SOFTWARE: Software not listed on this page at any level is unsupported. LDAP software not listed is considered untested and best effort support only. For more details and exceptions, refer to the WebSphere Portal 6.1.x Support Statement [http://publib.boulder.ibm.com/infocenter/wpdoc/v6r1m0/topic/com.ibm.wp.ent.doc_v6101/overview/inst_req_supt.html]. Also see the listing of software explicitly not supported for use with WebSphere Portal 6.1.x in WebSphere Portal Support Statement Addendum - Unsupported Products [http://www.ibm.com/support/docview.wss?rs=688&uid=swg27012957] (#7012957 [http://www.ibm.com/support/docview.wss?rs=688&uid=swg27012957]). |
528004ecee89a54f4c7e5d842bac68c9_4 | Operating systems
supported with 32-bit WebSphere Application Server and WebSphere Portal [/support/docview.wss?uid=swg27019359&aid=1] * AIX Version 7 Release 1 (64-bit operating system)
* AIX Version 6 Release 1 Technology level 0 Service release 4 (6100-00-04), or with higher Technology or Service release level (64-bit operating system)
* AIX 5L Version 5 Release 3 Technology level 7 Service release 1 (5300-07-01), or with higher Technology or Service release level (32-bit or 64-bit operating system) |
528004ecee89a54f4c7e5d842bac68c9_5 | [/support/docview.wss?uid=swg27019359&aid=1] [/support/docview.wss?uid=swg27019359&aid=1] [/support/docview.wss?uid=swg27019359&aid=1] Operating systems
supported with 64-bit WebSphere Application Server and WebSphere Portal [/support/docview.wss?uid=swg27019359&aid=1] * AIX Version 7 Release 1 (64-bit operating system)
* AIX Version 6 Release 1 Technology level 0 Service release 4 (6100-00-04), or with higher Technology or Service release level (64-bit operating system)
* AIX 5L Version 5 Release 3 Technology level 7 Service release 1 (5300-07-01), or with higher Technology or Service release level (64-bit operating system) |
528004ecee89a54f4c7e5d842bac68c9_6 | [/support/docview.wss?uid=swg27019359&aid=1] [/support/docview.wss?uid=swg27019359&aid=1] [/support/docview.wss?uid=swg27019359&aid=1] AIX hardware requirements [/support/docview.wss?uid=swg27019359&aid=1] * IBM POWER family of processors
* Disk space requirements: * Minimum 2.5 GB free disk space for installation for WebSphere Portal
* Minimum 1.0 GB free disk space for installation for WebSphere Application Server
* Minimum 4 GB total disk space recommended for installation
* Physical memory: Under minimal load, WebSphere Portal can function with 2GB of RAM. However, 4GB is an optimal starting point for RAM in a production environment.
* CD-ROM drive |
528004ecee89a54f4c7e5d842bac68c9_7 | [/support/docview.wss?uid=swg27019359&aid=1] [/support/docview.wss?uid=swg27019359&aid=1] [/support/docview.wss?uid=swg27019359&aid=1] Application Servers
The WebSphere-supplied Java SDK is required for both the run time and any remote Java clients. [/support/docview.wss?uid=swg27019359&aid=1] * WebSphere Application Server V7.0.0.11 with IBM SDK 1.6 SR12 (WebSphere Application Server product site) [http://www.ibm.com/software/webservers/appserv/was/]#1a#1b#1b
* WebSphere Application Server V6.1.0.31 with IBM SDK 1.5 SR7 (WebSphere Application Server product site) [http://www.ibm.com/software/webservers/appserv/was/]#1a#1b * Note: IBM Java SDK V5 reached end of service in 2015. If you continue to use WebSphere Application Server 6.1.x after that date with extended support, Java SDK V5 is no longer included |
528004ecee89a54f4c7e5d842bac68c9_8 | Refer to "Required WebSphere Interim Fixes for WebSphere Portal V6.1.0.5 and V6.1.5.2 [http://www.ibm.com/support/docview.wss?uid=swg24027476]" for the complete list of fixes required for WebSphere Application Server. [/support/docview.wss?uid=swg27019359&aid=1] [/support/docview.wss?uid=swg27019359&aid=1] [/support/docview.wss?uid=swg27019359&aid=1] Optional WebSphere Servers [/support/docview.wss?uid=swg27019359&aid=1] * WebSphere Application Server SCA feature pack 1.0.1.5
* WebSphere Application Server XML feature pack 1.0.0.5
* WebSphere Process Server V6.2.0.2*, 6.1.2.3, and 6.1.0.4 (all via Client Install option only with WAS 6.1x releases) *Refer to technote #1398123 for Process Server V6.2 Client installation [http://www.ibm.com/support/docview.wss?uid=swg21398123]
* WebSphere Virtual Enterprise (formerly "Extended Deployment") V6.1.1.1, 6.1.0.5 (WebSphere Extended Deployment product site [http://www.ibm.com/software/webservers/appserv/extend/]) |
528004ecee89a54f4c7e5d842bac68c9_9 | JavaScript Library [/support/docview.wss?uid=swg27019359&aid=1] * Dojo V1.3.2 or 1.1.1
To take advantage of the support for Microsoft Internet Explorer V8.0 or to use the new features in 6.1.5.2 such as Mashups integration and the Page Builder Theme, you will need to use Dojo V1.3.2. Refer to the topic "Using a different Dojo version [http://publib.boulder.ibm.com/infocenter/wpdoc/v6r1/topic/com.ibm.wp.ent.doc_v615/admin/epc_use_prior_dojo.html]" for more information. [/support/docview.wss?uid=swg27019359&aid=1] [/support/docview.wss?uid=swg27019359&aid=1] [/support/docview.wss?uid=swg27019359&aid=1] Databases
[/support/docview.wss?uid=swg27019359&aid=1] * Derby V10.1 and 10.3 |
528004ecee89a54f4c7e5d842bac68c9_10 | * IBM DB2 Universal Database (DB2 product site) [http://www.ibm.com/software/data/db2/9/] (also supports High Availability Disaster Recovery (HADR) Feature) * V9.7 FP1 for Linux, Unix, Windows
* V9.5 for Linux, Unix, Windows: Enterprise Server Edition 9.5 FP5, Express Edition 9.5 FP5, Workgroup Server Edition 9.5 FP5 (viper 2) (including HADR)
* V9.1 for Linux, Unix, Windows: Enterprise Server Edition 9.1 FP9, Express Edition 9.1 FP9, Workgroup Server Edition 9.1 FP9 (including HADR)
* V8.1 for Linux, Unix, Windows: Enterprise Server Edition 8.1 FP16, Express Edition 8.1 FP16, Workgroup Server Edition 8.1 FP16 (including HADR)
* IBM DB2 for z/OS V9.1 and V8.1, PUT level 0901 or later maintenance (DB2 for z/OS product site) [http://www.ibm.com/software/data/db2/zos/]#2 (also supports High Availability Disaster Recovery (HADR) Feature)
* WebSphere Information Integrator V8.2 FP4 |
528004ecee89a54f4c7e5d842bac68c9_11 | * Oracle (Oracle Database product site) [http://www.oracle.com/database/index.html] (Oracle Database clustering using RAC on all supported Oracle levels. Supports connect time failover#3a) * Standard/Enterprise V9.2.0.8, 10.1.0.5 Patch 4, 10.2.0.4 and 10.2.0.5 (patchset 8202632) (including RAC) (Supports Automatic Storage Management (ASM) Feature)
* Oracle 11gR2 V11.2.0.1 (including RAC)
* Oracle 11gR1 V11.1.0.7 (including RAC)
* Microsoft SQL Server (Microsoft product site) [http://www.microsoft.com] * Enterprise Edition 2008 SP1 [http://www.microsoft.com]
* Enterprise Edition 2005 SP3 |
528004ecee89a54f4c7e5d842bac68c9_12 | [/support/docview.wss?uid=swg27019359&aid=1] [/support/docview.wss?uid=swg27019359&aid=1] [/support/docview.wss?uid=swg27019359&aid=1] Java Database Connectivity (JDBC) Drivers [/support/docview.wss?uid=swg27019359&aid=1] * DataDirect Connect JDBC 4.0 (type 4) (DataDirect Connect JDBC product site [http://www.datadirect.com/products/jdbc/index.ssp])
* DB2 Driver for JDBC and SQLJ 3.1 (type 2/4)
* JCC JDBC driver level 3.58.90 or above to connect to DB2 for z/OS Note: Use the JDBC drivers provided with DB2 LUW V9.7 FP2 when the Portal is not also running on z/OS
* Derby embedded JDBC Driver
* Microsoft SQL Server JDBC Driver 1.2 or 2.0 (Microsoft SQL Server JDBC Driver site [http://msdn.microsoft.com/en-us/data/aa937724.aspx])
* Oracle 9i or 10g or 11g JDBC Driver Thin (type 4) (Oracle JDBC product site [http://www.oracle.com/technology/software/tech/java/sqlj_jdbc/index.html]) |
528004ecee89a54f4c7e5d842bac68c9_13 | [/support/docview.wss?uid=swg27019359&aid=1] [/support/docview.wss?uid=swg27019359&aid=1] [/support/docview.wss?uid=swg27019359&aid=1] Web servers
[/support/docview.wss?uid=swg27019359&aid=1] * Apache HTTP Server V2.0.5.9 (Apache Server product site) [http://httpd.apache.org/] (Apache Server 2.0.5.9 includes CERT Advisory CA-2002-17)
* Apache HTTP Server V2.2 (Apache Server product site) [http://httpd.apache.org/] (Apache 2.2.x is supported with WebSphere Application Server 7.0.#4a)#4a
* IBM HTTP Server for WAS V7.0 and 6.1 (IBM HTTP Server product site) (HTTP Server 7.0 is supported with WebSphere Application Server 7.0 only) [http://www.ibm.com/software/webservers/httpservers/] |
528004ecee89a54f4c7e5d842bac68c9_14 | * IBM HTTP Server for iSeries V7R1, V6R1 and V5R4 (IBM HTTP Server product site) [http://www-03.ibm.com/systems/i/software/http/index.html](HTTP Server for i5/OS is provided natively on System i5 and is not bundled with or installed by WebSphere Portal. For V5R4, supported group PTF is SF99114 level 13; for V6R1, supported group PTF is SF99115 level 1. For V5R4, the license program number is 5722DG1; for V6R1, the license program number is 5761DG1. Issue the GO LICPGM to display all the installed licensed programs. For WebSphere Application 6.1.0.21 on V6R1M0, apply SI35071. For WebSphere Application 7.0.0.1 on V6R1M0, apply SI35078)
* Microsoft Internet Information Services (IIS) V7.5 or 7.0 (only for WAS 7 environments) and 6.0 (Microsoft product site) [http://www.microsoft.com] |
528004ecee89a54f4c7e5d842bac68c9_15 | * IBM Lotus Domino Enterprise Server V8.5.2, 8.5.1, 8.5, 8.0.2, 8.0.1, 8.0 and V7.0.3, 7.0.2, 7.0.1 (Lotus Domino product site) [http://www.lotus.com/products/product4.nsf/wdocs/dominohomepage]#4d(To use Lotus Domino Version 7.0 with WebSphere Application Server 6.1, you must install the Web Server plug-in for Lotus Domino Server Version 6 which is a part of the Web Server plug-in for WebSphere Application Server 6.1)
* Sun Java System Web Server 7 Update 8 or 6.1 SP12 (Sun product site) [http://www.sun.com/products/] |
528004ecee89a54f4c7e5d842bac68c9_16 | [/support/docview.wss?uid=swg27019359&aid=1] [/support/docview.wss?uid=swg27019359&aid=1] [/support/docview.wss?uid=swg27019359&aid=1] Web browsers
(required for administration/configuration, sample program execution and launch pad. There is no restriction nor certification of Web browsers on clients that connect the server to display content) [/support/docview.wss?uid=swg27019359&aid=1] * 6.1.0.5: * Microsoft Internet Explorer 8.0, 7.0, 6.0 (Microsoft product site) [http://www.microsoft.com]
* Firefox V3.6, 3.5, 3.0, 2.0, 1.5.0.7 (Firefox product site) [http://www.mozilla.org/]
* Apple Safari 3.2 and higher (Apple product site) [http://www.apple.com/safari/]
* Apple Safari 4.0, 4.0.5 (Apple product site) [http://www.apple.com/safari/] |
528004ecee89a54f4c7e5d842bac68c9_17 | Safari is not supported for use with the Common Mail portlet. For additional information, see Limitations on Safari Web browser. Mashup Integration not supported with Safari for Windows. [http://www.ibm.com/support/docview.wss?uid=swg21320077]
* Opera 9.52 and higher [http://www.ibm.com/support/docview.wss?uid=swg21320077](Opera product site) [http://www.opera.com/products/]
Drag and Drop functionality of administering portlets and pages is not supported with Opera. Opera is not supported for use with the Common Mail portlet or the Domino and Extended Products Portlets. For additional information, see Limitations on Opera Web browser. [http://www.ibm.com/support/docview.wss?uid=swg21318444]
*
* 6.1.5.2: * Microsoft Internet Explorer 8.0, 7.0, 6.0 (Microsoft product site) [http://www.microsoft.com]
PageBuilder, Mashup Integration and Wiki/Blogs in V6.1.5.2 are not supported or functional when using Microsoft Internet Explorer V6.0.#6f |
528004ecee89a54f4c7e5d842bac68c9_18 | * Firefox V3.6, 3.5, 3.0 (Firefox product site) [http://www.mozilla.org/]
* Apple Safari 3.2 and higher (Apple product site) [http://www.apple.com/safari/]
* Apple Safari 4.0, 4.0.5 (Apple product site) [http://www.apple.com/safari/]
Safari is not supported for use with the Common Mail portlet. For additional information, see Limitations on Safari Web browser. Mashup Integration not supported with Safari for Windows. [http://www.ibm.com/support/docview.wss?uid=swg21320077]#6a#6e
* Opera 9.52 and higher (Opera product site) [http://www.opera.com/products/]
Drag and Drop functionality of administering portlets and pages is not supported with Opera. Opera is not supported for use with the Common Mail portlet or the Domino and Extended Products Portlets. For additional information, see Limitations on Opera Web browser. [http://www.ibm.com/support/docview.wss?uid=swg21318444]#6b |
528004ecee89a54f4c7e5d842bac68c9_19 | [/support/docview.wss?uid=swg27019359&aid=1] [/support/docview.wss?uid=swg27019359&aid=1] [/support/docview.wss?uid=swg27019359&aid=1] LDAP servers
[/support/docview.wss?uid=swg27019359&aid=1] * IBM Lotus Domino Enterprise Server V8.5.2, 8.5.1, 8.5, 8.0.2, 8.0.1, 8.0 and V7.0.3, 7.0.2, 7.0.1 (Lotus Domino product site) [http://www.lotus.com/products/product4.nsf/wdocs/dominohomepage] For 7.0.2 and 7.0.1: Apply SPR KLIN6LRTHJ to be able to return Groups and Users by direct lookup. Turkish users should use version 7.0.3 or later.#7a
* IBM Tivoli Directory Server 6.2, 6.1 and 6.0 (IBM Tivoli Directory Server product site) [http://www.ibm.com/software/tivoli/products/directory-server/] Add the fix for APAR IO02714 on applicable releases, available at IBM Support.#7b
* IBM z/OS Security Server 1.7 and 1.6 (IBM z/OS Security Server product site) [http://www.ibm.com/systems/z/advantages/security/index.html] |
528004ecee89a54f4c7e5d842bac68c9_20 | * IBM z/OS.e Security Server 1.7 and 1.6 (IBM z/OS Security Server product site)
* Novell eDirectory 8.8 or 8.7.3 (Novell eDirectory product site) [http://www.novell.com/products/edirectory/]
* Sun Java System Directory Server 7, 6.3, 6.1, and 6 (Sun product site) [http://www.sun.com/products/]
* Microsoft Active Directory 2008, including Lightweight Directory Server (AD LDS, previously referred to as "Application Mode" or ADAM)
* Windows Active Directory 2000 and 2003 including Application Mode |
528004ecee89a54f4c7e5d842bac68c9_21 | [/support/docview.wss?uid=swg27019359&aid=1] [/support/docview.wss?uid=swg27019359&aid=1] [/support/docview.wss?uid=swg27019359&aid=1] Software for collaboration - Domino and Extended Products (optional) [/support/docview.wss?uid=swg27019359&aid=1] * IBM Lotus Domino Enterprise Server V8.5.2, 8.5.1, 8.5, 8.0.2, 8.0.1, 8.0 and V7.0.3, 7.0.2, 7.0.1, 6.5.6 (IBM Lotus product site) [http://www.ibm.com/developerworks] Domino V8.5.2 also needs the fix applied for SPR DPOS895USS, contact Domino Technical Support for the fix.
* IBM Lotus Domino Document Manager V7 and 6.5.1
* IBM Lotus Sametime V8.5, 8.0.2, 8.0, 7.5.1 and 7.5 (IBM Lotus product site) [http://www.ibm.com/developerworks] |
528004ecee89a54f4c7e5d842bac68c9_22 | [/support/docview.wss?uid=swg27019359&aid=1] [/support/docview.wss?uid=swg27019359&aid=1] [/support/docview.wss?uid=swg27019359&aid=1] Software for content management (optional) [/support/docview.wss?uid=swg27019359&aid=1] * IBM Lotus Web Content Management V6.1.0.5 or 6.1.5.2 (IBM Lotus Web Content Management product site) [http://www.ibm.com/software/lotus/products/webcontentmanagement/]
* Ephox EditLive IBM LWCM OEM version 3.4.1.41 (which includes EditLive version 7.0.1.46.) (Ephox EditLive product site [http://www.ephox.com])
* IBM Lotus Quickr V8.5, 8.1.1 (IBM Lotus product site) [http://www.ibm.com/developerworks]
* 6.1.5.2: IBM Lotus FileNet P8 V4.5 (IBM Lotus product site) [http://www.ibm.com/developerworks]
* 6.1.5.2: IBM Content Manager V8.4 (IBM Content Manager product site) [http://www.ibm.com/software/data/cm/cmgr/] |
528004ecee89a54f4c7e5d842bac68c9_23 | [/support/docview.wss?uid=swg27019359&aid=1] [/support/docview.wss?uid=swg27019359&aid=1] [/support/docview.wss?uid=swg27019359&aid=1] Supported Java Runtime Environments - Web Content Management authoring portlet [/support/docview.wss?uid=swg27019359&aid=1] * Java Runtime Environments (requires one) V1.6.x or 1.5.x (Sun product site) [http://www.sun.com/products/] |
528004ecee89a54f4c7e5d842bac68c9_24 | [/support/docview.wss?uid=swg27019359&aid=1] [/support/docview.wss?uid=swg27019359&aid=1] [/support/docview.wss?uid=swg27019359&aid=1] External Security software (optional) [/support/docview.wss?uid=swg27019359&aid=1] * IBM Tivoli Access Manager V6.1 and 6.0 for trust association interceptor and enhanced trust association interceptor (support for Subject creation) (Tivoli Access Manager product site) [http://www.ibm.com/software/tivoli/products/access-mgr-e-bus/] When using Tivoli Access Manager 6.0 for authorization or integrated user provisioning with WebSphere Portal, the Tivoli Access Manager AMJRTE component must be at the Version 5.1 fix pack 2 level or later. This version of AMJRTE component is automatically installed with WebSphere Application Server Version 5.1.1 or later, but must still be configured to work with WebSphere Portal. |
528004ecee89a54f4c7e5d842bac68c9_25 | * IBM Tivoli Access Manager V6.0 for Java Authorization Contract for Containers (JACC) (Tivoli Access Manager product site) [http://www.ibm.com/software/tivoli/products/access-mgr-e-bus/] When using Tivoli Access Manager 6.0 for authorization or integrated user provisioning with WebSphere Portal, the Tivoli Access Manager AMJRTE component must be at the Version 5.1 fix pack 2 level or later. This version of AMJRTE component is automatically installed with WebSphere Application Server Version 5.1.1 or later, but must still be configured to work with WebSphere Portal
* Computer Associates SiteMinder V6.0 |
528004ecee89a54f4c7e5d842bac68c9_26 | [/support/docview.wss?uid=swg27019359&aid=1] [/support/docview.wss?uid=swg27019359&aid=1] [/support/docview.wss?uid=swg27019359&aid=1] Software for portlet development [/support/docview.wss?uid=swg27019359&aid=1] * IBM Rational Application Developer V7.5 and 7.0.6 (plugin for UTE)
* IBM Portlet Factory V6.1.5, 6.1
[/support/docview.wss?uid=swg27019359&aid=1] [/support/docview.wss?uid=swg27019359&aid=2] [/support/docview.wss?uid=swg27019359&aid=3] [/support/docview.wss?uid=swg27019359&aid=3] Software for license management [/support/docview.wss?uid=swg27019359&aid=1] * IBM Tivoli License Compliance Manager V2.3
[/support/docview.wss?uid=swg27019359&aid=1] [/support/docview.wss?uid=swg27019359&aid=4] [/support/docview.wss?uid=swg27019359&aid=5] [/support/docview.wss?uid=swg27019359&aid=5] |
528004ecee89a54f4c7e5d842bac68c9_27 | Related information
[http://d02was006.southbury.ibm.com/support/dcf/preview.wss?host=d02dbs88.southbury.ibm.com&db=support/swg/swgdocs.nsf&unid=2D60E6429AA6F54285256FB00046AC9D&taxOC=SSCVS22&MD=2005/02/25%2008:02:00&sid=]Detailed system requirements [http://www.ibm.com/support/docview.wss?rs=688&uid=swg27007791]
WebSphere Portal Information Centers and more [http://www.ibm.com/developerworks/websphere/zones/portal/proddoc.html]
Support Statement [http://publib.boulder.ibm.com/infocenter/wpdoc/v6r1m0/topic/com.ibm.wp.ent.doc/overview/inst_req_supt.html]
See disclaimer.
Top of page |
528004ecee89a54f4c7e5d842bac68c9_28 | Disclaimer
IBM reserves the right to change specifications and other product information without prior notice. This publication could include technical inaccuracies or typographical errors. References herein to IBM products and services do not imply that IBM intends to make them available in other countries. IBM PROVIDES THIS PUBLICATION AS IS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some jurisdictions do not allow disclaimer of express or implied warranties in certain transactions, therefore, this statement may not apply to you.
Top of page
ORIGINAL PUBLICATION DATE
2009/9/1 |
4eea03a1594481bba23fecf155152967_0 | IBM Deletion of virtual portal fails with transaction timeout - United States virtual portal; timeout; delete; portlet; EJPAH4000E; EJPEB0804E; rollbackexception; admin; WTRN0006W TECHNOTE (TROUBLESHOOTING)
PROBLEM
Attempt to delete virtual portal via Virtual Portal Manager portlet fails with error:
EJPAH4000E: Failed to delete virtual portal
Attempts to delete the virtual portal using the ConfigEngine task "delete-virtual-portal" may fail as well.
CAUSE
With the introduction of Managed Pages in WebSphere Portal 8.0, virtual portal deletions require more transaction time when removing from the system. This increased transaction time can lead to an error situation if either of the following timeouts is exceeded:
* the total and/or maximum transaction lifetime timeout value(s) for the server
* the WCM component's transaction timeout
DIAGNOSING THE PROBLEM
SystemOut.log may show the following:
Example #1: |
4eea03a1594481bba23fecf155152967_1 | [9/10/12 10:08:43:757 AMT] 0000001a TimeoutManage I WTRN0006W: Transaction 00000139B080F02D0000000236122A9CB64A65E5C73B006CE4605EA6BEA57CC3F6A1783B00000139B080F02D0000000236122A9CB64A65E5C73B006CE4605EA6BEA57CC3F6A1783B00000001 has timed out after 120 seconds.
[datestamp] 00000055 JTATransactio E RT0025E: Failed to save user transaction
com.ibm.icm.ci.CDMTransactionException
at com.ibm.icm.ci.JCRUserTransaction.commit(JCRUserTransaction.java:189)
at com.ibm.icm.ci.JTATransaction.commit(JTATransaction.java:166)
at com.ibm.icm.jcr.RepositoryImpl.deleteWorkspace(RepositoryImpl.java:804)
at com.ibm.wps.wcm.vpmapping.JcrWorkspaceVirtualPortalHandler$2.run(JcrWorkspaceVirtualPortalHandler.java:336)
....
Caused by: javax.transaction.RollbackException
at com.ibm.tx.jta.impl.TransactionImpl.stage3CommitProcessing(TransactionImpl.java:1254)
.... |
4eea03a1594481bba23fecf155152967_2 | [datestamp] 00000055 DeleteVPComma E com.ibm.wps.command.vp.DeleteVPCommand AbstractCommand.throwCommandException EJPEB0804E: DeleteVPCommand: An exception in the data backend occurred.
com.ibm.portal.resolver.exceptions.LocalizedIOException: EJPFB0002E: Exception occurred.
at com.ibm.wps.wcm.vpmapping.JcrWorkspaceVirtualPortalHandler.onVirtualPortalDeleted(JcrWorkspaceVirtualPortalHandler.java:348)
....
Caused by: javax.transaction.RollbackException
at com.ibm.tx.jta.impl.TransactionImpl.stage3CommitProcessing(TransactionImpl.java:1254)
....
Example #2: |
4eea03a1594481bba23fecf155152967_3 | [datestamp] 000000f4 TimeoutManage I WTRN0006W: Transaction PA_MageVirtualPortals#MgeVirtualPortals.war#ManageVirtualPortals 00000143FA0D566200000001680EB7144589A0582D368B51A9A958DDACFF4F62EA89D95C00000143FA0D566200000001680EB7144589A0582D368B51A9A958DDACFF4F62EA89D95C00000001 has timed out after 120 seconds.
[datestamp] 000000f4 TimeoutManage I WTRN0124I: When the timeout occurred the thread with which the transaction is, or was most recently, associated was Thread[WebContainer : 8,5,main]. The stack trace of this thread when the timeout occurred was:
java.net.SocketInputStream.socketRead0(Native Method)
java.net.SocketInputStream.read(SocketInputStream.java:150)
java.net.SocketInputStream.read(SocketInputStream.java:121)
com.ibm.db2.jcc.t4.x.b(x.java:208)
com.ibm.db2.jcc.t4.x.c(x.java:360)
com.ibm.db2.jcc.t4.x.c(x.java:473)
com.ibm.db2.jcc.t4.x.v(x.java:1241)
com.ibm.db2.jcc.t4.ab.a(ab.java:61)
com.ibm.db2.jcc.t4.p.a(p.java:50)
com.ibm.db2.jcc.t4.rb.b(rb.java:220) |
4eea03a1594481bba23fecf155152967_4 | com.ibm.db2.jcc.am.po.qc(po.java:3498)
com.ibm.db2.jcc.am.po.b(po.java:4461)
com.ibm.db2.jcc.am.po.ic(po.java:799)
com.ibm.db2.jcc.am.po.executeUpdate(po.java:777)
com.ibm.ws.rsadapter.jdbc.WSJdbcPreparedStatement.pmiExecuteUpdate(WSJdbcPreparedStatement.java:1187)
com.ibm.ws.rsadapter.jdbc.WSJdbcPreparedStatement.executeUpdate(WSJdbcPreparedStatement.java:804)
com.ibm.icm.da.portable.common.sql.PPreparedStatement.executeUpdate(PPreparedStatement.java:83) com.ibm.icm.da.portable.data.DeleteWorkspace.deleteWideTableData(DeleteWorkspace.java:359)
com.ibm.icm.da.portable.data.DeleteWorkspace.deleteWorkspace(DeleteWorkspace.java:130) com.ibm.icm.da.portable.data.DataManager.deleteWorkspace(DataManager.java:700)
com.ibm.icm.ci.workspace.impl.PDeleteWorkspaceImpl.deleteWorkspace(PDeleteWorkspaceImpl.java:84) com.ibm.icm.ci.workspace.impl.WorkspaceService.deleteWorkspace(WorkspaceService.java:270) com.ibm.icm.jcr.RepositoryImpl.deleteWorkspace(RepositoryImpl.java:808) |
4eea03a1594481bba23fecf155152967_5 | com.ibm.wps.wcm.vpmapping.JcrWorkspaceVirtualPortalHandler$2.run(JcrWorkspaceVirtualPortalHandler.java:336)
com.ibm.wps.wcm.vpmapping.JcrWorkspaceVirtualPortalHandler$2.run(JcrWorkspaceVirtualPortalHandler.java:324) com.ibm.wps.ac.impl.UnrestrictedAccessImpl.run(UnrestrictedAccessImpl.java:84)
com.ibm.wps.command.ac.ExecuteUnrestrictedCommand.execute(ExecuteUnrestrictedCommand.java:90) com.ibm.wps.wcm.vpmapping.JcrWorkspaceVirtualPortalHandler.onVirtualPortalDeleted(JcrWorkspaceVirtualPortalHandler.java:345)
com.ibm.wps.command.vp.VirtualPortalHandlerImpl.onVirtualPortalDeleted(VirtualPortalHandlerImpl.java:396)
com.ibm.wps.command.vp.DeleteVPCommand.execute(DeleteVPCommand.java:178 com.ibm.wps.portlets.managevirtualportals.actions.DoDeleteVirtualPortalAction.deleteVirtualPortal(DoDeleteVirtualPortalAction.java:151)
.... |
4eea03a1594481bba23fecf155152967_6 | RESOLVING THE PROBLEM
1. Increase the total transaction lifetime timeout and maximum transaction timeout values (for example, to 600 seconds or greater) using the instructions in the Related information section below.
2. If the problem persists after addressing the change in suggestion #1 and the error in SystemOut.log shows that the timeout still occurs after 120 seconds (as opposed to the increased value that you just set), then update to Cumulative Fix (CF) 9 or later to get the fix for APAR PI04872 and then add (or update if already exists) the following custom property to the WCM_WCMConfigService Resource Environment Provider:
Name: wcm.transaction.timeout
Value: 600 (for example)
Note: There is not a target value for a transaction timeouts that applies to every customer environment. The goal should be to find a value that allows the virtual portal deletion to succeed but does not introduce significant delay in being alerted for other transaction timeouts. |
4eea03a1594481bba23fecf155152967_7 | RELATED INFORMATION
#Transaction settings [http://pic.dhe.ibm.com/infocenter/wasinfo/v8r0/topic/com.ibm.websphere.nd.doc/info/ae/ae/tjta_settlog.html]
PI04872 [http://www-01.ibm.com/support/docview.wss?uid=swg1PI04872]
Setting Resource Environment Provider custom properties [http://www-10.lotus.com/ldd/portalwiki.nsf/dx/Setting_service_configuration_properties_wp8] |
9bd1db50d03171b1fc15eab106620d17_0 | IBM Rational Host Access Transformation Services 9.0 - United States service release; modpack; mod pack; upgrade; refresh; refresh pack DOWNLOADABLE FILES
ABSTRACT
IBM Rational Host Access Transformation Services 9.0 has been made generally available and contains fixes to version 9.0.
DOWNLOAD DESCRIPTION
Table of Contents Sections Description * What's new
This section provides an overview on what is new in this release with a description of any new functions or enhancements when applicable. * Impact assessment
This section provides information related to the impact of this release to allow you to assess how your environment may be affected. * Prerequisites
This section provides important information to review prior to the installation of this release. * Download package
This section provides the direct link to obtain the download package for installation in your environment. * Installation instructions |
9bd1db50d03171b1fc15eab106620d17_1 | This section provides the installation instructions necessary to apply this release into your environment. * Known problems
This section contains a link to the known problems (open defects) identified at the time of this release. Supporting Documentation Document Description * Detailed System Requirements [http://www.ibm.com/support/docview.wss?uid=swg27011794]
Click to review the detailed system requirements information for a complete list of hardware requirements, supported operating systems, prerequisites and optional supported software, with component-level details and operating system restrictions. * Information Center [http://pic.dhe.ibm.com/infocenter/hatshelp/v90/index.jsp] |
9bd1db50d03171b1fc15eab106620d17_2 | The information center provides you with user assistance for the product. You can view, browse, and search online information related to the product. You can also visit IBM Product information [http://www.ibm.com/support/publications/us/library/index.shtml#letter_R] page to browse for additional information centers. * Fix List [http://www.ibm.com/support/docview.wss?uid=swg27027491]
Click to review a complete list of the defects (APARs) resolved in this release including a list of resolved defects for the entire version family. PREREQUISITES
IBM Installation Manager, Version 1.6.3.1 [http://www.ibm.com/support/docview.wss?uid=swg27025142] or later is required to install HATS 9.0.
INSTALLATION INSTRUCTIONS
For installation instructions, see Installing HATS [http://pic.dhe.ibm.com/infocenter/hatshelp/v90/topic/com.ibm.hats.doc/doc/gsinstal.htm] in the Rational Host Access Transformation Services (HATS) V9.0 Information Center.
DOWNLOAD PACKAGE |
9bd1db50d03171b1fc15eab106620d17_3 | Download options Access type Description Passport Advantage [https://www.ibm.com/software/howtobuy/softwareandservices/passportadvantage] Passport Advantage and Passport Advantage Express clients are required to sign in to download the software package. IBM OEM software [https://www.ibm.com/software/howtobuy/softwareandservices/oem] IBM Software Group OEM offerings are designed for partners who develop and sell business solutions with embedded or bundled IBM middleware software. Clients with Flexible Contract Type (FCT) license purchases and IBM Business Partners must sign in to download the software package. HOW CRITICAL IS THIS FIX? |
9bd1db50d03171b1fc15eab106620d17_4 | Impact Assessment Impact Description Recommended This release is a service release of Rational Host Access Transformation Services 9.0. It contains new features as well as fixes for client-reported and internally found defects. PROBLEMS SOLVED
Click the Fix List link in the table of contents above to review a list of the problems solved in this release.
KNOWN SIDE EFFECTS
The following defects were not resolved in this release. |
9bd1db50d03171b1fc15eab106620d17_5 | APAR Description IC94113 [http://www.ibm.com/support/docview.wss?uid=swg1IC94113] DBCS characters behind DDS window border are garbled. IC94307 [http://www.ibm.com/support/docview.wss?uid=swg1IC94307] Rich client: Part of DBCS fixed character is damaged.
For up-to-date information about known issues and workarounds, see Rational Host Access Transformation Service 9.0 - Known issues and workarounds [http://www.ibm.com/support/docview.wss?uid=swg27038663].
CHANGE HISTORY
For what's new in HATS 9.0, see the Rational Host Access Transformation Services (HATS) V9.0 Information Center [http://pic.dhe.ibm.com/infocenter/hatshelp/v90/index.jsp].
Back to top
TECHNICAL SUPPORT
TAB NAVIGATION
* General Support Information- selected tab,
* Support Resources [http://www.ibm.com/support/docview.wss?uid=swg27020747]- selected tab,
IBM Rational Software Support Communities |
9bd1db50d03171b1fc15eab106620d17_6 | * Visit the IBM Support Portal [http://www.ibm.com/support/entry/portal/Overview/Software/Rational/product] to configure your support portal experience and review FAQs, lists of known problems, fixes, and a wealth of important support information.
* Visit developerWorks [http://www.ibm.com/developerworks/rational/] to access an online collection of tutorials, sample code, standards, forums and other resources provided by experts at IBM to assist software developers using Rational tools including access to the IBM RFE Community [http://www.ibm.com/developerworks/rfe/].
* Visit the Jazz Community [http://jazz.net/] if you use a Rational product created using the Jazz platform to interact directly with the Jazz development team and other community members, download product trials and betas and track developement progress. |
9bd1db50d03171b1fc15eab106620d17_7 | HELPFUL HINTS FOR OBTAINING TECHNICAL ASSISTANCE:
Before you contact IBM Rational Software Support, gather the background information that you need to describe the problem. When you describe a problem to an IBM software support specialist, be as specific as possible and include all relevant background information so that the specialist can help you solve the problem efficiently. To save time, know the answers to these questions:
* What software versions were you running when the problem occurred?
* Do you have logs, traces, or messages that are related to the problem?
* Can you reproduce the problem? If so, what steps do you take to reproduce it?
* Is there a workaround for the problem? If so, be prepared to describe the workaround. |
9bd1db50d03171b1fc15eab106620d17_8 | If you have helpful information to diagnose or identify the problem on your system, you can provide this data by following the instructions to exchange information with IBM Technical Support [http://www.ibm.com/software/support/exchangeinfo.html].
Follow IBM Rational Client Support on Twitter [http://twitter.com/rationalsupport] | Facebook [http://facebook.com/rationalsupport] | YouTube [http://www.youtube.com/ibmrationalsupport] | devWorks Blog [https://www.ibm.com/developerworks/mydeveloperworks/blogs/nfrsblog/?lang=en]
Back to top
[/support/docview.wss?uid=swg24035040&aid=1]Problems (APARS) fixed [/support/docview.wss?uid=swg24035040&aid=2]Problems (APARS) fixed
IC87102, IC87488, IC87959, IC88940, IC88981, IC89933, IC91191, IC91370, IC91420, IC92195 |
6b550025655ee302f75e9d737f5e6305_0 | IBM Monitoring for Virtual Environments: VMware VI 7.2.0.2-TIV-ITM_VMWVI_RPT-IF0001 - United States DOWNLOADABLE FILES
ABSTRACT
This is an Interim Fix for IBM Tivoli Monitoring for Virtual Environments: VMware VI 7.2 Fix Pack 2 reports
DOWNLOAD DESCRIPTION
(C) Copyright International Business Machines Corporation 2015.
All rights reserved.
Component: IBM(R) Tivoli(R) Monitoring for Virtual Environments: VMware VI
Agent TCR Reports, Version 7.2 Fix Pack 2
Component ID: 5724L92AG
Interim Fix: 0001, 7.2.0.2-TIV-ITM_VMWVI_RPT-IF0001
Date: January 23, 2015
Contents:
1.0 General description
2.0 Problems fixed
3.0 Architecture and prerequisites
4.0 Image directory contents
5.0 Installation instructions
6.0 Additional installation information
7.0 Known problems and workarounds
8.0 Additional product information
9.0 Copyright and trademark information
10.0 Notices
1.0 General description
----------------------- |
6b550025655ee302f75e9d737f5e6305_1 | This interim fix resolves the APARs and defects listed in the
"Problems Fixed" section below.
2.0 Problems fixed
------------------
The following problems are addressed by this fix.
2.1 APARs
---------------
None. |
6b550025655ee302f75e9d737f5e6305_2 | 2.2 Defects
-----------
Defect: 210286
Abstract: Update model for VM PARTITION
Additional information: For "Free_Space" and "Used_Space" attributes, the
default aggregation is defined not as AVG but as SUM. It usually
works as expected but if there were two entries which have same
"Timestamp", the "VM_PARTITION" attribute group's data is shown
with doubled values.
Defect: 212729
Abstract: Drill through feature is not working in VE 7.2 FP2 reports
Additional information: A few VMware VI reports are showing the following
message, when we try drill through by clicking on report chart:
RSV-CM-0005 Content Manager did not return an object for the
requested search path.
Defect: 212776
Abstract: Datacenter parameter/prompt is missing in a few VM reports
Additional information: The Datacenter parameter/prompt is missing in the
following VMware VI reports: VM Heat Chart, Bottom N VMs by
Resource Pool and Top N VMs By Resource Pool.
Defect: 212851 |
6b550025655ee302f75e9d737f5e6305_3 | Abstract: Place Date range parameter after the Resource prompts
Additional information: A few VMware VI reports contain time selection over
resource selection. Therefore to make uniformity across the reports,
place Date range parameter after the resource prompts (like Data
Center and Cluster).
Defect: 212924
Abstract: Unsorted resources e.g.Cluster on parameter selection page
Additional information: Most of the VMware VI reports sometimes display
unsorted resources (viz. Data Center, Cluster, Host Servers, VMs
etc.) on parameter selection (aka prompt) page.
Defect: 212925
Abstract: Incorrect caption/label for Host Server resource parameter
Additional information: Incorrect caption/label for the resource parameter
e.g. In Network usage by VMs report, the "Host Server(s)" drop
down list title needs to be corrected as "Host Server" as user
can select only one host in this report. |
6b550025655ee302f75e9d737f5e6305_4 | 2.3 Enhancements
------------------
Feature: 210245
Abstract: Enhance model to add SAMPLES.
Additional information: Add SAMPLES query item/column for each summarized
attribute group view (viz. Hourly, Daily, Weekly and Monthly)
in existing VMware VI Agent reports data model.
Feature: 213018
Abstract: RFE 60331: Require a new report for Cluster Utilization Details
Additional information: Require a new cluster level report like the Host
Server Utilization Details report, which is useful and included the
actual data points from the graph at the bottom of the report.
Defect: 213084
Abstract: Provide a choice to select date range or start & end week
Additional information: Provide a parameter choice (aka date filter option)
to either select date range or start and end week of the year in
the following VMware VI reports: Cluster Weekly Comparison and
Host Servers Weekly Comparison.
2.4 Superseded fixes
---------------------
None. |
6b550025655ee302f75e9d737f5e6305_5 | 2.5 APARs and defects included from superseded fixes
---------------------------------------------------------------
None.
3.0 Architecture and prerequisites
----------------------------------
This fix is supported on all operating systems listed in the IBM Tivoli
Monitoring for Virtual Environments: Dashboard, Reporting, and Capacity Planning
User's Guide, version 7.2 Fix Pack 2. See chapter 9 for information on the Tivoli
Common Reporting.
The User's Guide is here:
http://www.ibm.com/support/knowledgecenter/SS9U76_7.2.0.2/com.ibm.tivoli.itmvs.doc_7.2.0.2/vedrcp72fp2_user.pdf [http://www.ibm.com/support/knowledgecenter/SS9U76_7.2.0.2/com.ibm.tivoli.itmvs.doc_7.2.0.2/vedrcp72fp2_user.pdf]
Please refer to the IBM Software Product Compatability Reports (SPCR)
for the latest operating system certification information:
http://publib.boulder.ibm.com/infocenter/prodguid/v1r0/clarity/index.html [http://publib.boulder.ibm.com/infocenter/prodguid/v1r0/clarity/index.html] |
6b550025655ee302f75e9d737f5e6305_6 | 3.1 Prerequisites for this fix
------------------------------
The prerequisite level for this fix is defined in Chapter 9 of the IBM Tivoli
Monitoring for Virtual Environments: Dashboard, Reporting, and Capacity Planning
User's Guide, version 7.2 Fix Pack 2.
4.0 Image directory content
---------------------------
This fix image contains the following files:
- 7.2.0.2-TIV-ITM_VMWVI_RPT-IF0001.README - This README file
- 7.2.0.2-TIV-ITM_VMWVI_RPT-IF0001.zip - Fix archive .zip format.
The fix archive file contains the following directories and files,
which is the same as the format found in the reports directory
of the IBM Tivoli Monitoring for Virtual Environments V7.2 Fix Pack 2
Dashboards, Capacity Planner and Reports (TMVE), Multilingual media
as found on Passport Advantage:
- gui
- lib
- model
- reports
- scripts
- setup_aix.bin
- setup_hpux.bin
- setup_linux.bin
- setup_solaris.bin
- setup_windows.exe
- silent_installer.properties
- tcr_install.properties |
6b550025655ee302f75e9d737f5e6305_7 | Note that this Interim Fix is a complete replacement of these
files.
5.0 Installation instructions
-----------------------------
This fix can be installed over an existing installation or as
a new install. Expand the archive file,
7.2.0.2-TIV-ITM_VMWVI_RPT-IF0001.zip, and copy the files in any
location on the same computer where the Tivoli Common Reporting
server is installed. |
6b550025655ee302f75e9d737f5e6305_8 | Use the following procedure to import reports that are bundled by using
the report installer:
1. From the \7.2.0.2-TIV-ITM_VMWVI_RPT-IF0001 directory on the product file, run the
command appropriate for your operating system:
• setup_aix.bin (for AIX)
• setup_hpux.bin (for HP-UX)
• setup_linux.bin (for Linux)
• setup_solaris.bin (for Solaris)
• setup_windows.exe (for Windows)
The installer window opens.
2. Choose your language and click OK.
3. On the Welcome page click Next.
4. Specify the Tivoli Common Reporting installation directory, such as
<JazzSM_Home>/reporting if you are using Tivoli Common Reporting 3.1 or
later with Jazz for Service Management and <TIP_Home>/TCRComponents if
you are using Tivoli Common Reporting 2.1.1 with Tivoli Integrated Portal.
You can use the default folder or use the Browse button to provide the
path. Click Next.
5. Choose the reports you want to install. Click Next.
6. Enter the Tivoli Common Reporting user name and password. Click Next. |
6b550025655ee302f75e9d737f5e6305_9 | 7. For each data source and data script, enter the data source configuration
information. Enter the following details for the selected cognos reports, and
then click Next:
• In the Enter the database username field, enter the administrator user name.
• In the Enter the user password field, enter the password.
• In the Choose the database type list, select the database type.
• In the Enter the database name field, enter the warehouse database name. For DB2
or Oracle, enter the database name. For MS SQL, enter the ODBC Data Source Name.
8. On the Data Script runDbScript Configuration page:
a. Click the JDBC User Credentials tab, and enter the Tivoli Data Warehouse database
user name and password to be used during the installation. Check the box to skip
defining the data source now.
b. Click the JDBC Database Credentials tab, and select database type. Edit the JDBC URL,
JDBC driver file names, and JDBC driver class for the selected database type and then
click Next. |
6b550025655ee302f75e9d737f5e6305_10 | • For DB2 database, required driver files are db2jcc.jar and db2jcc_license_cu.jar
(Note: JDBC credentials must have db2admin privileges.)
• For Oracle database, required driver file is oraclethin.jar
• For MS SQL Server database, required driver file is sqljdbc.jar
9. On the Report Installer Summary page, verify the reports to be installed, click Install,
and wait for the installer to finish.
10. The post-installation report is displayed. Check if the installation was successfully
finished and click Done. |
6b550025655ee302f75e9d737f5e6305_11 | Results:
Agent reports are now installed on your Tivoli Common Reporting server.
Alternatively, see Topic: Importing reports by using the report installer
in Chapter 17 of the IBM Tivoli Monitoring Administrator's Guide,
version 6.3 Fix Pack 2 for install instructions.
The Administrator's Guide is here:
http://www.ibm.com/support/knowledgecenter/SSTFXA_6.3.0.2/com.ibm.itm.doc_6.3fp2/itm63fp2_admin.pdf [http://www.ibm.com/support/knowledgecenter/SSTFXA_6.3.0.2/com.ibm.itm.doc_6.3fp2/itm63fp2_admin.pdf]
6.0 Additional installation information
---------------------------------------
None
7.0 Known problems and workarounds
----------------------------------
None
8.0 Additional product information
----------------------------------
None
9.0 Copyright and trademark information
----------------------------------
A current list of IBM trademarks is available on the Web at "Copyright
and trademark information" at www.ibm.com/legal/copytrade.shtml. |
6b550025655ee302f75e9d737f5e6305_12 | 10.0 Notices
-------
INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THIS PUBLICATION
"AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Some jurisdictions do not allow disclaimer of express or implied
warranties in certain transactions, therefore, this statement may not
apply to you.
This information could include technical inaccuracies or typographical
errors. Changes are periodically made to the information herein; these
changes will be incorporated in new editions of the publication. IBM
may make improvements and/or changes in the product(s) and/or the
program(s) described in this publication at any time without notice.
Microsoft, Windows, and Windows Server are trademarks of Microsoft
Corporation in the United States, other countries, or both. |
6b550025655ee302f75e9d737f5e6305_13 | Java and all Java-based trademarks and logos are trademarks or
registered trademarks of Oracle and/or its affiliates.
UNIX is a registered trademark of The Open Group in the United States
and other countries.
Linux is a registered trademark of Linus Torvalds in the United States,
other countries, or both.
Other company, product, or service names may be trademarks or service
marks of others. |
6b550025655ee302f75e9d737f5e6305_14 | Third-Party License Terms and Conditions, Notices and Information
-----------------------------------------------------------------
The license agreement for this product refers you to this file for
details concerning terms and conditions applicable to third party
software code included in this product, and for certain notices and
other information IBM must provide to you under its license to
certain software code. The relevant terms and conditions, notices and
other information are provided or referenced below. Please note that
any non-English version of the licenses below is unofficial and is
provided to you for your convenience only. The English version of the
licenses below, provided as part of the English version of this file,
is the official version. |
6b550025655ee302f75e9d737f5e6305_15 | Notwithstanding the terms and conditions of any other agreement you
may have with IBM or any of its related or affiliated entities
(collectively "IBM"), the third party software code identified below
are "Excluded Components" and are subject to the following terms and
conditions:
- the Excluded Components are provided on an "AS IS" basis
- IBM DISCLAIMS ANY AND ALL EXPRESS AND IMPLIED WARRANTIES AND
CONDITIONS WITH RESPECT TO THE EXCLUDED COMPONENTS, INCLUDING, BUT
NOT LIMITED TO, THE WARRANTY OF NON-INFRINGEMENT OR INTERFERENCE
AND THE IMPLIED WARRANTIES AND CONDITIONS OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE
- IBM will not be liable to you or indemnify you for any claims
related to the Excluded Components
- IBM will not be liable for any direct, indirect, incidental,
special, exemplary, punitive or consequential damages with respect
to the Excluded Components.
PREREQUISITES
IBM Tivoli Monitoring for Virtual Environments: VMware VI Agent, version 7.2 Fix Pack 2 |
6b550025655ee302f75e9d737f5e6305_16 | INSTALLATION INSTRUCTIONS
Please refer to the full README contained in the Download Description section above for general installation instructions.
DOWNLOAD PACKAGE
Download RELEASE DATE LANGUAGE SIZE(Bytes) Download Options
What is Fix Central(FC)? [https://www.ibm.com/support/fixcentral/help?page=swfaqs] 7.2.0.2-TIV-ITM_VMWVI_RPT-IF0001 23 Jan 2015 English 53552332 FC [http://www-933.ibm.com/support/fixcentral/swg/selectFixes?parent=ibm/Tivoli&product=ibm/Tivoli/Tivoli+Monitoring+for+Virtual+Servers&release=All&platform=All&function=fixId&fixids=7.2.0.2-TIV-ITM_VMWVI_RPT-IF0001&includeSupersedes=0] [ ] |
aaf2f92035f290e6df9a1df45e18fb27_0 | IBM JDBC driver or database insufficiencies cause administration portlets to fail. - United States RT0002E; JDBC; database; driver; RepositoryException; PLS; EJPAS0017E TECHNOTE (TROUBLESHOOTING)
PROBLEM
You attempt to create a new page via the Manage Pages portlet or add a portlet to a page via the Edit Layout portlet and encounter an error. |
aaf2f92035f290e6df9a1df45e18fb27_1 | SYMPTOM
SystemOut.log contains:
... DefaultTransa E Message: Could not save object in repository.,
Cause: javax.jcr.RepositoryException: RT0002E: Error while calling a function createItems of PLS data manager
com.ibm.workplace.wcm.services.repository.RepositoryException:
Message: Could not save object in repository., Cause: javax.jcr.RepositoryException: RT0002E: Error while calling a function createItems of PLS data manager
...
Caused by: com.ibm.icm.da.DBAccessException:
java.sql.SQLFeatureNotSupportedException:DSRA1300E: Feature is not implemented: PreparedStatement.setBinaryStream
at com.ibm.icm.da.portable.data.WideTableData.changeItems(WideTableData.java:857)
The client browser displays:
EJPAS0017E ... Message: Could not save object in repository.,
Cause: javax.jcr.RepositoryException: RT0002E: Error while calling a
function createItems of PLS data ...
or:
EJPAE0015E: Failed to add new portlets.
...
EJPEC0002E: The transaction has been set to rollback state... |
aaf2f92035f290e6df9a1df45e18fb27_2 | CAUSE
The JDBC driver does not meet WebSphere Portal v8's prerequisites.
DIAGNOSING THE PROBLEM
Check SystemOut.log for the database server version and JDBC driver version:
DSRA8204I: Database product version : ...
InternalGener I DSRA8205I: JDBC driver name : ...
InternalGener I DSRA8206I: JDBC driver version : ...
Compare these to WebSphere Portal v8's prerequisites. Refer to the WebSphere Portal V8.0 detailed system requirements link below.
RESOLVING THE PROBLEM
If the database server and/or JDBC driver do not meet WebSphere Portal v8's prerequisites, upgrade or downgrade the component(s) to the appropriate supported level(s) and restart the Portal server(s).
If upgrading the JDBC driver requires replacing the .jar with another differently named .jar, other components in the system that referenced the older .jar may be affected. Pay special consideration to: |
aaf2f92035f290e6df9a1df45e18fb27_3 | WAS Integrated Solutions Console > Environment > WebSphere Variables
VMM_JDBC_CLASSPATH
ORACLE_JDBC_DRIVER_PATH
These are stored in: <profile>/config/cells/<cell name>/variables.xml
Other WebSphere variables may also reference the older .jar, or these same variables may be set in different scopes, so check other variables and variables.xml files as well, such as: <profile>/config/cells/<cell name>/nodes/<node name>/variables.xml
RELATED INFORMATION
WebSphere Portal V8.0 detailed system requirements [http://www-01.ibm.com/support/docview.wss?uid=swg27007791] |
af64c3f96efb9751e8ecaba3c4facf04_0 | IBM Security Bulletin: Apache Commons FileUpload Vulnerabilities in IBM WebSphere MQ File Transfer Edition component (CVE-2016-1000031) - United States SECURITY BULLETIN
SUMMARY
The DiskFileItem class in Apache Commons Fileupload before version 1.3.3, used in IBM WebSphere MQ File Transfer Edition, specifically the Web Gateway component, could allow remote attackers to execute arbitrary code under the context of the current process, causing an undefined behavior.
VULNERABILITY DETAILS |
af64c3f96efb9751e8ecaba3c4facf04_1 | CVEID:CVE-2016-1000031 [http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2016-1000031]
DESCRIPTION:Apache Commons FileUpload, used in IBM WebSphere MQ File Transfer Edition, could allow deserialization of untrusted data in the DiskFileItem class of the FileUpload library. A remote attacker could exploit this vulnerability to execute arbitrary code under the context of the current process.
CVSS Base Score: 9.8
CVSS Temporal Score: Seehttps://exchange.xforce.ibmcloud.com/vulnerabilities/117957 [https://exchange.xforce.ibmcloud.com/vulnerabilities/117957]for the current score
CVSS Environmental Score*: Undefined
CVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H)
AFFECTED PRODUCTS AND VERSIONS
IBM WebSphere MQ File Transfer Edition v7.0.0
IBM WebSphere MQ File Transfer Edition v7.0.1
IBM WebSphere MQ File Transfer Edition v7.0.2
IBM WebSphere MQ File Transfer Edition v7.0.3
IBM WebSphere MQ File Transfer Edition v7.0.4 |
af64c3f96efb9751e8ecaba3c4facf04_2 | REMEDIATION/FIXES
All affected product versions are already End of Support. Customers must contact IBM to obtain a fix for the affected release.
WORKAROUNDS AND MITIGATIONS
None
GET NOTIFIED ABOUT FUTURE SECURITY BULLETINS
Subscribe to My Notifications [ http://www-01.ibm.com/software/support/einfo.html] to be notified of important product support alerts like this.
REFERENCES
Complete CVSS v3 Guide [http://www.first.org/cvss/user-guide]
On-line Calculator v3 [http://www.first.org/cvss/calculator/3.0]
RELATED INFORMATION
IBM Secure Engineering Web Portal [http://www.ibm.com/security/secure-engineering/bulletins.html]
IBM Product Security Incident Response Blog [http://www.ibm.com/blogs/psirt]
CHANGE HISTORY
22 Dec 2017 Original Version |
af64c3f96efb9751e8ecaba3c4facf04_3 | *The CVSS Environment Score is customer environment specific and will ultimately impact the Overall CVSS Score. Customers can evaluate the impact of this vulnerability in their environments by accessing the links in the Reference section of this Security Bulletin.
DISCLAIMER
According to the Forum of Incident Response and Security Teams (FIRST), the Common Vulnerability Scoring System (CVSS) is an "industry open standard designed to convey vulnerability severity and help to determine urgency and priority of response." IBM PROVIDES THE CVSS SCORES "AS IS" WITHOUT WARRANTY OF ANY KIND, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. CUSTOMERS ARE RESPONSIBLE FOR ASSESSING THE IMPACT OF ANY ACTUAL OR POTENTIAL SECURITY VULNERABILITY. |
f848f8d3ad3066d8f8eb6b776fd336a8_0 | IBM How Connect TDWC 9.3 to TWS Engine lower level release - United States dwc 93; connect; SSL ; TLS TECHNOTE (TROUBLESHOOTING)
PROBLEM(ABSTRACT)
DWC 9.3 users cannot connect to TWS Engine lower level releases (8.5.1 until 9.2)
SYMPTOM
Unable to connect to TWS 8.5.1 ,8.6 or 9.1/9.2 from DWC 9.3.
Check the WAS SystemOut.log for error :
SSL0080E: javax.net.ssl.SSLHandshakeException - The client and server could not negotiate the desired level of security. Reason: Server chose SSLv3,
but that protocol version is not enabled or not supported by the client. javax.net.ssl.SSLHandshakeException: Server chose SSLv3, but that protocol version is not enabled or not supported by the client.
CAUSE
DWC 9.3 is packaged with WAS 8.5.5.4 and due to known vulnerabilities has SSLV3 disabled. However TWS 9.2 and earlier versions use SSLv3 by default and so the DWC 9.3 cannot connect
RESOLVING THE PROBLEM
You can solve this problem by configuring your TWS engines to use TLS instead of SSL : |
f848f8d3ad3066d8f8eb6b776fd336a8_1 | Backup and edit :
TWA_HOME/WAS/TWSProfile/config/cells/TWSNodeCell/security.xml
Find sslProtocol and change "SSL_TLS" to "TLS"
Find ssl.protocol and change value="SSL" to value="TLS"
Backup and edit :
TWA_HOME/WAS/TWSProfile/properties/ssl.client.props
Find com.ibm.ssl.protocol=SSL and change to com.ibm.ssl.protocol=TLS
Backup and edit :
TWA_HOME/WAS/TWSProfile/temp/ssl.client.props
Find com.ibm.ssl.protocol=SSL and change to com.ibm.ssl.protocol=TLS
Stop and restart WAS.
*Be aware that your Engines are now using TLS and so you must also reconfigure any DWC 9.2 or 9.1 installations that need to connect to those engines. You would change them to use TLS in the same way as above but also by the same changes in these copies of security.xml and ssl.client.props :
TWA_HOME/JazzSM/profile/config/cells/JazzSMNode01Cell/security.xml
TWA_HOME/JazzSM/profile/properties/ssl.client.props
TWA_HOME/JazzSM/profile/temp/ssl.client.props |
f848f8d3ad3066d8f8eb6b776fd336a8_2 | Please consider that since you configure with TLS the WAS of TWS Engine also the Dynamic Agent can be impacted.
See technote 1689332. |
edae6b694323e08d75c16b4e0be3683e_0 | IBM Handling 302 redirect error message in a Web Application Firewall - United States HTTP; Redirect; 302; non idempotent TECHNOTE (TROUBLESHOOTING)
PROBLEM(ABSTRACT)
DataPower is preventing POST based HTTP redirect in accordance with RFC and displays this as part of the error in the logs:
Redirect and failed due to non idempotent request method. (RFC 2616 sec 10.3)
SYMPTOM
This technote pertains to the following errors.
Example 1: This example shows the service getting the following message: a Backside header failed to parse due to: Failed to establish a backside connection with a HTTP Redirect and failed due to non idempotent request method. (RFC 2616 sec 10.3) message. |
edae6b694323e08d75c16b4e0be3683e_1 | web-application-firewall (CookieEncrypt): Backside header failed to
parse due to: Failed to establish a backside connection
12:20:53 webapp-firewall warn 60452 10.176.3.97 HTTP Redirect from
'http://10.176.3.97:8080/cgi-bin/WebObjects.exe/IndvGate.woa/5/wo/2jHo28
QYOlhC2RZ1XQ15DE5OKo8/0.1.2.27.3.SecureSignOn.1' failed due to non
idempotent request method. (RFC 2616 sec 10.3)
Example 2: This example shows an HTTP response code 302,HTTP Redirect and failed due to non idempotent request method - RFC 2616 sec 10.3 message. |
edae6b694323e08d75c16b4e0be3683e_2 | Wed May 21 2008 10:39:11 [mpgw][info] mpgw(ECP-MPGW):
tid(369602)[9.65.237.170]: HTTP response code 302 for
'http://9.65.237.170:8080/forum/ucplogin.php?mode=login'
Wed May 21 2008 10:39:11 [mpgw][warn] mpgw(ECP-MPGW):
tid(369602)[9.65.237.170]: HTTP Redirect from
'http://9.65.237.170:8080/forum/ucplogin.php?mode=login' failed due to
non idempotent request method - RFC 2616 sec 10.3.
Wed May 21 2008 10:39:11 [mpgw][error] mpgw(ECP-MPGW):
tid(369602)[9.65.237.170]: Backside header failed to parse due to:
Failed to establish a backside connection
CAUSE
302,HTTP Redirect and failed due to non idempotent request method - RFC 2616 sec 10.3 message.
This is caused by the adherence to the HTTP RFC 2616 by the Datapower Appliance.
For additional information on the RFC you may see this page RFC2616 [http://www.w3.org/Protocols/rfc2616/rfc2616.html]
ENVIRONMENT
WebSphere DataPower XI50 and XS40 |
edae6b694323e08d75c16b4e0be3683e_3 | DIAGNOSING THE PROBLEM
Backside header failed to parse due to: Failed to establish a backside connection failed due to non idempotent request method. (RFC 2616 sec 10.3)
RESOLVING THE PROBLEM
To resolve the issue, the IBM WebSphere DataPower SOA appliance web application firewall can be configured to handle these "302 Redirects". Follow the steps outlined in the attached document that explain how to configure a web application firewall to handle the redirects using the attached ResetLocation.xsl stylesheet. With the specified edit for your environment, this file will handle most simple use cases and may also be edited to handle any additional requirements for your specific business solution.
sampleForRedirects.doc [/support/docview.wss?uid=swg21318593&aid=2] [/support/docview.wss?uid=swg21318593&aid=1]ResetLocation.xsl [/support/docview.wss?uid=swg21318593&aid=4] [/support/docview.wss?uid=swg21318593&aid=3] |
edae6b694323e08d75c16b4e0be3683e_4 | Cross reference information Segment Product Component Platform Version Edition Business Integration WebSphere DataPower XML Security Gateway XS40 Not Applicable Firmware 4.0.1, 3.8.2, 3.8.1, 3.8, 3.7.3 Edition Independent Business Integration WebSphere DataPower SOA Appliances General Firmware 4.0.1, 3.8.2, 3.8.1, 3.8, 3.7.3 Edition Independent |
dbb44c6416b06e85a4c8a10ee13a9bc5_0 | IBM Automatically renew trusted credential - United States security; trusted credentials SSO renew TECHNOTE (FAQ)
QUESTION
How do I choose the value to use for the Security > Authentication > Automatically renew trusted credential setting?
ANSWER
For IBM Cognos Business Intelligence(BI) deployments that do not implement a single sign-on (SSO) solution, stored credentials used for running scheduled activities can be automatically updated. When a user logs into the IBM Cognos BI application with a user name and password, the trusted credential used to run schedules when not logged in will be refreshed as well. This removes the burden from the end user of having to remember to manually refresh their trusted credentials and may eliminate failed activities caused by changed or expired user credentials.
The credential refresh behaviour is controlled by the Security > Authentication > Automatically renew trusted credential setting in Cognos Configuration. |
dbb44c6416b06e85a4c8a10ee13a9bc5_1 | * Primary namespace only (default setting): When you log on to the first namespace of your session, if you have trusted credentials for that account, the credentials are updated for the primary account only. All other credentials for other namespaces are not updated.
* Off: Credentials are not updated in any namespace.
* All namespaces: When you log on to the first namespace, your credentials are updated as described for "Primary namespace only". When you log on to additional namespaces, if your trusted credentials associated with the primary account contain logon information for that namespace, then those trusted credentials are updated. NOTE: Do not use the All namespaces option if users authenticate into secondary namespaces as different users.
A user's trusted credentials for a namespace will only be renewed once per day. |
dbb44c6416b06e85a4c8a10ee13a9bc5_2 | It is NOT possible to use SSO with the feature 'Automatically Renew Trusted Credentials' found in Cognos BI. The reason for this is due to the following: |
dbb44c6416b06e85a4c8a10ee13a9bc5_3 | "A trusted credential is special because the namespace credentials it stores must be usable at any time, not depending on any timestamp. This rules out SSO tickets like Kerberos tokens or SAP tokens as they will expire after a short time and will become unusable. A suitable trusted credential therefore usually is a pair consisting of a user name and a password. However, for SSO based authentication to IBM Cognos BI, there is no password available to the namespace that can be stored into the trusted credential. Therefore, this feature will only work for basic authentication, when the user provides a user name and password to the login screen." RELATED INFORMATION
Proven Practices: Securing the IBM Cognos 10 BI Environ [http://www.ibm.com/developerworks/data/library/cognos/security/cognos_bi_platform/page602.html]
Cognos Analytics 11 Equivalent Technote [http://www-01.ibm.com/support/docview.wss?uid=swg21998776] |
da54639e340061eda765384fe45ba2c9_0 | IBM Tivoli Network Manager IP Edition 4.2.0 Fix Pack 3, 4.2.0-TIV-ITNMIP-FP0003 - United States DOWNLOADABLE FILES
ABSTRACT
This fix pack is a cumulative fix release and addresses several APARs and internally found issues since the release of Tivoli Network Manager IP Edition 4.2.0 Fix Pack 2.
DOWNLOAD DESCRIPTION
WHAT'S NEW: [http://www.ibm.com/support/knowledgecenter/en/SSSHRK_4.2.0/itnm/ip/wip/relnotes/reference/nmip_rn.html?view=kc#relnotes__descriptio]
http://www.ibm.com/support/knowledgecenter/en/SSSHRK_4.2.0/itnm/ip/wip/relnotes/reference/nmip_rn.html?view=kc#relnotes__descriptio [http://www.ibm.com/support/knowledgecenter/en/SSSHRK_4.2.0/itnm/ip/wip/relnotes/reference/nmip_rn.html?view=kc#relnotes__descriptio]n
Summary of the Enhancements included in this Fix Pack:
The following features and functions are introduced in Fix Pack 3.
Support for SLES 12.0
*
Support for DB2 version 11.1 * |
da54639e340061eda765384fe45ba2c9_1 | Support for IBM zLinux Systems *
* Red Hat Enterprise zLinux Server 7.3 (s390x, 64 bit) SuSE zLinux Enterprise Server (SLES) 12.0 SP1(s390x,64 bit)
*
*
*
*
* https://www.ibm.com/software/passportadvantage/pao_customer.html
*
Offline geographical maps *
Custom geographical map layers *
Regional aggregation for geographical maps *
Before installing or upgrading Network Manager, refer to the Fix Pack Release notes:
http://www.ibm.com/support/knowledgecenter/SSSHRK_4.2.0/itnm/ip/wip/relnotes/reference/nmip_rn.html [http://www.ibm.com/support/knowledgecenter/SSSHRK_4.2.0/itnm/ip/wip/relnotes/reference/nmip_rn.html]
=====================================================================
Summary of fixes in V4.2.0 Fix Pack 3
=====================================================================
For details of an individual APAR, go to www.ibm.com/support [www.ibm.com/support] then enter the APAR name/# in "Search Support" then select search. |
da54639e340061eda765384fe45ba2c9_2 | IV89573 EXPAT XML PARSER VULNERABILITIES IV90563 DELAY RCA REPROCESSING UPON SEEING CLEAR FOR ROOTCAUSE ALERT IV90626 CISCO WEBTOOLS SEND EMPTY EMAIL IV90807 SLOW PROCESSING IN STITCHER SWITCHFDBTOCONNECTIONS IV91086 THE DISCOVERY PROCESSES CANNOT BE STARTED FROM THE ITNM GUI WHEN ITNM IS INSTALLED IN A MASTER/SLAVE SETUP IV91094 IP Filtered view incorrectly skips links between non-matched interfaces IV91222 COLLAPSING A SUBGRAPH LEAVES THE NODES AN UNUSABLE DISTANCE FROM EACH OTHER. IV91592 TELLABS JAVA COLLECTOR TO DISPLAY CARD NAMES. IV91725 TIMER THREADS ARE NOT TIMELY GARBAGE COLLECTED IN THE STRUCTURE BROWSER TREE. IV92191 Huawei MPLSTelnet parse the recent 'display ip vpn-instance verbose' format incorrectly. This result in incorrect association of VPN Name and the respective interface IV92353 POLLER CORES STARTING SNMP POLICIES WITH ENTITIES IN SCOPE THAT HAVE NO IFNAME IV92982 RCA PLUGIN SGMENTATION FAULT OVER SMALLER NUMBER OF CHANGES IV93054 ITNM DEVICESTRUCTURE - INFERFACE |
da54639e340061eda765384fe45ba2c9_3 | EVENTS NOT INCLUDED IV93591 NO DATA BEING DISPLAYED ON TOP N PERFORMERS WIDGET IN THE NETWORK HEALTH DASHBOARD IV94005 DYNAMIC DISTINCT NETWORK VIEW CREATES EXTRA/DUPLICATE VIEWS. IV94658 LOCAL TYPE TOOLS FOR CONTEXT MENU IS NOT SUPPORTED BY ITNM 4.2 |
da54639e340061eda765384fe45ba2c9_4 | Known problems with V4.2.0 Fix Pack 3
http://www.ibm.com/support/knowledgecenter/en/SSSHRK_4.2.0/itnm/ip/wip/relnotes/reference/nmip_rn.html#relnotes__problems [http://www.ibm.com/support/knowledgecenter/en/SSSHRK_4.2.0/itnm/ip/wip/relnotes/reference/nmip_rn.html#relnotes__problems] PREREQUISITES
Prerequisites and Installation Instructions
See http://www.ibm.com/support/knowledgecenter/SSSHRK_4.2.0/itnm/ip/wip/install/task/nmip_ins_installing.html [http://www.ibm.com/support/knowledgecenter/SSSHRK_4.2.0/itnm/ip/wip/install/task/nmip_ins_installing.html]
INSTALLATION INSTRUCTIONS
IBM TIVOLI NETWORK MANAGER IP EDITION V4.2.0 FIX PACK 3
=======================================================
Build 4.2.0.34
This document describes the known problems and APAR fixes for Network Manager V4.2.0 Fix Pack 3.
Copyright IBM Corporation 2017 |
da54639e340061eda765384fe45ba2c9_5 | 1 WHAT'S NEW
See http://www.ibm.com/support/knowledgecenter/en/SSSHRK_4.2.0/itnm/ip/wip/relnotes/reference/nmip_rn.html?view=kc#relnotes__description [http://www.ibm.com/support/knowledgecenter/en/SSSHRK_4.2.0/itnm/ip/wip/relnotes/reference/nmip_rn.html?view=kc#relnotes__description]
2 INSTALLATION
See http://www.ibm.com/support/knowledgecenter/SSSHRK_4.2.0/itnm/ip/wip/install/task/nmip_ins_installing.html [http://www.ibm.com/support/knowledgecenter/SSSHRK_4.2.0/itnm/ip/wip/install/task/nmip_ins_installing.html]
3 POSTINSTALLATION AND CONFIGURATION
See http://www.ibm.com/support/knowledgecenter/SSSHRK_4.2.0/itnm/ip/wip/install/task/nmip_ins_postinstallationtaskssummary.html [http://www.ibm.com/support/knowledgecenter/SSSHRK_4.2.0/itnm/ip/wip/install/task/nmip_ins_postinstallationtaskssummary.html] |
da54639e340061eda765384fe45ba2c9_6 | 4 KNOWN PROBLEMS AND LIMITATIONS
See http://www.ibm.com/support/knowledgecenter/en/SSSHRK_4.2.0/itnm/ip/wip/relnotes/reference/nmip_rn.html?view=kc#relnotes__problems [http://www.ibm.com/support/knowledgecenter/en/SSSHRK_4.2.0/itnm/ip/wip/relnotes/reference/nmip_rn.html?view=kc#relnotes__problems]
5 SUMMARY OF APAR FIXES IN NETWORK MANAGER V4.2.0 FIX PACK 3
See http://www.ibm.com/support/knowledgecenter/en/SSSHRK_4.2.0/itnm/ip/wip/relnotes/reference/nmip_rn.html?view=kc#relnotes__apar-fixes [http://www.ibm.com/support/knowledgecenter/en/SSSHRK_4.2.0/itnm/ip/wip/relnotes/reference/nmip_rn.html?view=kc#relnotes__apar-fixes]
URL LANGUAGE SIZE(Bytes) 4.2.0_README_FP0003 [http://www.ibm.com/support/fixcentral/quickorder?product=ibm%2FTivoli%2FTivoli+Network+Manager+IP+Edition&fixids=4.2.0_README_FP0003&source=SAR] English 7178
DOWNLOAD PACKAGE |
da54639e340061eda765384fe45ba2c9_7 | Download RELEASE DATE LANGUAGE SIZE(Bytes) Download Options |
da54639e340061eda765384fe45ba2c9_8 | What is Fix Central(FC)? [https://www.ibm.com/support/fixcentral/help?page=swfaqs] 4.2.0-TIV-ITNMIP-AIX-FP0003 28 Apr 2017 Language Independent 3091689671 FC [http://www.ibm.com/support/fixcentral/quickorder?product=ibm%2FTivoli%2FTivoli+Network+Manager+IP+Edition&fixids=4.2.0-TIV-ITNMIP-AIX-FP0003&source=SAR] [ ] 4.2.0-TIV-ITNMIP-Linux-FP0003 28 Apr 2017 Language Independent 3091689662 FC [http://www.ibm.com/support/fixcentral/quickorder?product=ibm%2FTivoli%2FTivoli+Network+Manager+IP+Edition&fixids=4.2.0-TIV-ITNMIP-Linux-FP0003&source=SAR] [ ] 4.2.0-TIV-NOIHD-AIX-FP0003 28 Apr 2017 Language Independent 27899824 FC [http://www.ibm.com/support/fixcentral/quickorder?product=ibm%2FTivoli%2FTivoli+Network+Manager+IP+Edition&fixids=4.2.0-TIV-NOIHD-AIX-FP0003&source=SAR] [ ] 4.2.0-TIV-NOIHD-Linux-FP0003 28 Apr 2017 Language Independent 27899818 FC |
da54639e340061eda765384fe45ba2c9_9 | [http://www.ibm.com/support/fixcentral/quickorder?product=ibm%2FTivoli%2FTivoli+Network+Manager+IP+Edition&fixids=4.2.0-TIV-NOIHD-Linux-FP0003&source=SAR] [ ] |
f8b6e0f2974fe62df0b8c3623124281f_0 | IBM How to Rollback From a Fix Pack or Interim Fix to an Earlier Build - United States uninstall; revert; downgrade; hotsite; HS; out; fixpack TECHNOTE (FAQ)
QUESTION
There may be times when there is a need to remove a previously installed Fix Pack or Interim Fix (hotsite) and revert to the original installed version. This document describes how to roll back an installed Fix Pack or Interim Fix applied to Cognos BI.
ANSWER
Assuming create backup was selected, there will be a folder with the backup under the uninstall directory. Use these files to roll back. In version 10.2.1 FP1 and above there is no option to create a backup, instead backups are automatically created in the <cognos_install>/bkp directory.
Note that the backup directories only contain copies of all individual files that were modified by the fix pack or interim fix, not the entire contents of the original directory. |
f8b6e0f2974fe62df0b8c3623124281f_1 | Care must also be taken when removing interim fixes to ensure that there weren't later interim fixes applied which also contain some of the same files. It is recommended that a full system and content store backup be performed before attempting.
Steps: |
f8b6e0f2974fe62df0b8c3623124281f_2 | 1. Stop the Cognos service and ensure that Cognos Configuration is not running.
2. When setting up the configuration of a newly installed Cognos BI environment, it is important to note that if you configure the new installation against the original content store, it is permanently upgraded to the new version and can no longer be used in the original environment. As a result, always create a backup of the content store prior to upgrading.
If a roll back to the original version is required, you can simply restore the backup. However, any work done after the content store has been upgraded (reports, models, security, etc...) to the new version will be lost, as all of this information is saved in the content store.
If you try to revert back to an earlier environment configured against the upgraded content store, you will get an error similar to the one below: |
f8b6e0f2974fe62df0b8c3623124281f_3 | CM-CFG-5027 Unable to upgrade the content store to the to the version N that is compatible with this version of Content Manager. The current version of the content store is M.
3. Also, please refer to the notes on the fix pack which would include perquisites on Backup/Restore of content store and also other requirements.
4. For versions 8 - 10.2.1: In the <cognos_install>/uninstall/backup directory there will be a list of date stamped folders with the applied fix packs and/or interim fixes.
For versions 10.2.1 FP1 and above: This is stored in the <cognos_install>/bkp directory
5. Go into the folders and check the cmplst.txt file and check for the correct version to revert to.
6. Once the correct version is found, copy the contents of the whole folder and paste it at the <cognos_install> level, which will overwrite the files applied by fix pack or interim fix update.
7. Start the Cognos service. |
f8b6e0f2974fe62df0b8c3623124281f_4 | HISTORICAL NUMBER
1028034 |
70e8e858f93c1f7707255bbb10b9875d_0 | IBM Using -Xgc:preferredHeapBase with -Xcompressedrefs - United States TECHNOTE (FAQ)
QUESTION
"Why does the JVM report a native out-of-memory (NOOM) when using compressed references? I am using a 64bit JVM and I clearly have plenty of memory left. How can I resolve this problem?"
CAUSE |
70e8e858f93c1f7707255bbb10b9875d_1 | *In this note, please refer to Java Versioning: Java Version.Release.ServiceRelease.FixPack
ex: Java 7.1.4.6 is the same as Java 7.1 SR4 FP6 is the same as Java 7 R1 SR4 FP6.
The IBM JVM will automatically use compressed references [http://publib.boulder.ibm.com/infocenter/javasdk/v6r0/topic/com.ibm.java.doc.diagnostics.60/diag/understanding/mm_compressed_references.html]when using a maximum heap size less than 25GB. This automated behavior was introduced in Java 6.1.5.0 and Java 7.0.4.0*. Compressed references (CR) decreases the size of Java objects making better use of available memory space. This better use of space results in improved JVM performance. *(Java 7.0.1.1 and later uses compressed references by default on z/OS)
See Introducing WebSphere Compressed Reference Technology [ftp://public.dhe.ibm.com/software/webserver/appserv/was/WAS_V7_64-bit_performance.pdf] for detailed information on how Compressed References work. |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.