command stringlengths 2 75 | syntax stringlengths 0 289k | hierarchy_level stringlengths 0 6.91k | description stringlengths 0 45.2k | options listlengths 0 499 | required_privilege_level stringlengths 0 330k | release_information stringlengths 0 3.14k | related_documentation listlengths 0 22 |
|---|---|---|---|---|---|---|---|
clear bfd session | clear bfd session
<all>
<address session-address>
<discriminator discr-number> | Drop one or more Bidirectional Forwarding Detection (BFD) sessions. | [
{
"name": "all",
"desc": "Drop all BFD sessions."
},
{
"name": "address session-address",
"desc": "(Optional) Drop all BFD sessions matching the specified address."
},
{
"name": "discriminator discr-number",
"desc": "(Optional) Drop the local BFD session matching the specified discri... | clear
Output Fields
When you enter this command, you are provided feedback on the status of your request.
Sample Output
clear bfd session all
user@host> clear bfd session all | Command introduced before Junos OS Release 7.4. | [] | |
clear bgp damping | clear bgp damping
<prefix> | Clear BGP route flap damping information. | [
{
"name": "none",
"desc": "Clear all BGP route flap damping information."
},
{
"name": "logical-system (all |",
"desc": ""
},
{
"name": "logical-system-name)",
"desc": "(Optional) Perform this operation on all logical systems or on a particular logical system."
},
{
"name": "... | clear
Output Fields
This command produces no output.
Sample Output
clear bgp damping
user@host> clear bgp damping | Command introduced before Junos OS Release 7.4. | [] | |
clear bgp neighbor | clear bgp neighbor
<all>
<as as-number>
<instance instance-name>
<malformed-route>
<neighbor>
<soft | soft-inbound>
<soft-minimum-igp> | Perform one of the following tasks:
•
Change the state of one or more BGP neighbors to IDLE. For neighbors in the ESTABLISHED state, this
command drops the TCP connection to the neighbors and then reestablishes the connection.
•
(soft keyword only) Reapply export policies and send refresh updates to one or more BGP nei... | [
{
"name": "all",
"desc": "Change the state of all BGP neighbors to IDLE."
},
{
"name": "as as-number",
"desc": "(Optional) Apply this command only to neighbors in the specified autonomous system (AS)."
},
{
"name": "gracefully",
"desc": "(Optional) Enable the BGP peer to start gracef... | clear
Output Fields
When you enter this command, you are provided feedback on the status of your request.
Sample Output
clear bgp neighbor
user@host> clear bgp neighbor | Command introduced before Junos OS Release 7.4.
malformed-route option introduced in Junos OS Release 13.2.
all option introduced in Junos OS Release 14.2.
gracefully and stale-routes options introduced in Junos OS Release 15.1. | [] | |
clear bgp table | clear bgp table table-name | Request that BGP refresh routes in a specified routing table. | [
{
"name": "logical-system (all | logical-system-name)",
"desc": "(Optional) Perform this operation on all logical systems or on a particular logical system."
},
{
"name": "table-name",
"desc": "Request that BGP refresh routes in the specified table. Additional Information In some cases, a prefix... | clear
Output Fields
This command produces no output.
Sample Output
clear bgp table private.inet.0
user@host> clear bgp table private.inet.0
clear bgp table inet.6 logical-system all
user@host> clear bgp table inet.6 logical-system all
clear bgp table private.inet.6 logical-system ls1
user@host> clear bgp table private... | Command introduced in Junos OS Release 9.0. | [] | |
clear bridge mac-ip-table | clear bridge mac-ip-table
<address>
<bridge-domain (all | bridge-domain-name>
<instance instance-name>
<logical-system (all | logical-system-name> | Clear the locally learnt ARP entries for EVPN routing instances where the instance-type is virtual-
switch. Remotely learnt entries cannot be cleared | [
{
"name": "address",
"desc": "(Optional) Clear the specific suppressed MAC address from the MAC-IP address table ."
},
{
"name": "bridge-domain (all |",
"desc": ""
},
{
"name": "bridge-domain-name)",
"desc": "(Optional) Clear the MAC-IP address table for all bridge domains or for a s... | maintenance | Command introduced in Junos OS Release 17.4R2. | [] | |
clear bridge mac-table | clear bridge mac-table
<bridge-domain (all | bridge-domain-name)>
<instance instance-name>
<interface interface-name>
<learning-vlan id (all-vlan | learning-vlan-id)>
<mac-address> | (MX Series routers only) Clear learned Layer 2 address information from the media access control (MAC)
address table. | [
{
"name": "none",
"desc": "Clear all learned Layer 2 address information from the MAC address table."
},
{
"name": "bridge-domain (all |",
"desc": ""
},
{
"name": "bridge-domain-name)",
"desc": "(Optional) Clear learned Layer 2 MAC addresses for all bridging domains or for the specif... | clear
Output Fields
When you enter this command, you are provided feedback on the status of your request.
Sample Output
clear bridge mac-table
user@host> clear bridge mac-table | Command introduced in Junos OS Release 8.4. | [] | |
clear bridge recovery-timeout | clear bridge recovery-timeout
<interface interface-name> | Clear all storm control errors from all the Ethernet switching interfaces on the switch, and restore the
interfaces to service. | [
{
"name": "interface",
"desc": ""
},
{
"name": "interface-name",
"desc": "Clear all storm control errors from the Ethernet switching interfaces on the interface specified in the command and restore this interface to service."
}
] | clear
Sample Output
clear bridge recovery-timeout (interface interface-name)
user@host> clear bridge recovery-timeout interface ae0.0
user@host> clear bridge recovery-timeout interface ae0.0 | Command introduced in Junos OS Release 14.1. | [
"Configuring Autorecovery for Port Security Events"
] | |
clear bridge statistics | clear bridge statistics
<bridge-domain bridge-domain>
<instance instance-name bridge-domain bridge-domain>
<logical-system logical-system-name instance instance-name bridge-domain bridge-domain> | Clear bridge statistics of all interfaces in a routing instance. | [
{
"name": "bridge-domain bridge-domain",
"desc": "(Optional) Clear bridge statistics of all interfaces for the specified bridge domain in the default routing instance in the global logical system."
},
{
"name": "instance instance-name",
"desc": ""
},
{
"name": "bridge-domain bridge-domai... | maintenance
Output Fields
These commands produces no output.
Sample Output
clear bridge statistics
user@host> clear bridge statistics bridge-domain bridge-domain-name
Sample Output
clear bridge statistics
user@host> clear bridge statistics instance instance-name bridge-domain bridge-domain-name
Sample Output
clear bri... | Command introduced in Junos OS Release 17.2. | [] | |
clear captive-portal | clear captive-portal (firewall [interface-names] | interface (802.1X) (all | [interface-names])
| mac-address [mac-addresses]) | Reset the authentication state of a captive portal interface or captive portal firewall statistics on one or
more interfaces. | [
{
"name": "firewall [interface-names]",
"desc": "Resets captive portal statistics on all interfaces or on the specified interface."
},
{
"name": "interface (all | interface-names)",
"desc": "Resets the authentication state of users connected to all interfaces or the specified interfaces."
},
... | view
Output Fields
Table 12 on page 3670 lists the output fields for the clear captive-portal interface command. (The clear
captive-portal firewall and clear captive-portal mac-address commands have no output). Output fields are
listed in the approximate order in which they appear.
Table 12: clear captive-portal interf... | Command introduced in Junos OS Release 10.1. | [
"Example: Setting Up Captive Portal Authentication on an EX Series Switch",
"Configuring Captive Portal Authentication (CLI Procedure)"
] | |
clear chassis alarms fabric degraded | clear chassis alarms fabric degraded lcc number fpc number | Clear the fabric degraded alarm for an FPC. | [
{
"name": "lcc",
"desc": ""
},
{
"name": "number",
"desc": "Line-card chassis number. Replace number with the following values depending on the LCC configuration: 0 through 7, when T1600 routers are connected to a TX Matrix Plus router with 3D SIBs in a routing matrix. 0, 2, 4, or 6, when T400... | clear
Sample Output
show system alarms (TX Matrix Plus router with 3D SIBs)
user@host> show system alarms
sfc0-re0:
--------------------------------------------------------------------------
2 alarms currently active
Alarm time Class Description
2013-05-08 18:13:58 UTC Major LCC 0 Major Er... | Command introduced in Junos OS Release 13.2. | [] | |
clear chassis cluster control-plane statistics | clear chassis cluster control-plane statistics | Clear the control plane statistics of a chassis cluster. | [] | clear
Output Fields
When you enter this command, you are provided feedback on the status of your request.
Sample Output
clear chassis cluster control-plane statistics
user@host> clear chassis cluster control-plane statistics
Cleared control-plane statistics | Command introduced in Junos OS Release 9.3. | [] | |
clear chassis cluster data-plane statistics | clear chassis cluster data-plane statistics | Clear the data plane statistics of a chassis cluster. | [] | clear
Output Fields
When you enter this command, you are provided feedback on the status of your request.
Sample Output
clear chassis cluster data-plane statistics
user@host> clear chassis cluster data-plane statistics
Cleared data-plane statistics | Command introduced in Junos OS Release 9.3. | [] | |
clear chassis cluster failover-count | clear chassis cluster failover-count | Clear the failover count of all redundancy groups. | [] | clear
Output Fields
When you enter this command, you are provided feedback on the status of your request.
Sample Output
The following example displays the redundancy groups before and after the failover-counts are cleared.
show chassis cluster status
user@host> show chassis cluster status
Cluster ID: 3
Node name ... | Command introduced in Junos OS Release 9.3. | [] | |
clear chassis cluster ip monitoring failure count ip address | clear chassis cluster ip-monitoring failure-count ip-address IP-address | Clear the failure count for a specified IP address.
NOTE: Entering an IP address at the end of this command is optional. If you do not
specify an IP address, the failure count for all monitored IP addresses is cleared. | [] | clear
Output Fields
When you enter this command, you are provided feedback on the status of your request.
Sample Output
user@host> clear chassis cluster ip-monitoring failure-count ip-address 10.1.1.1
clear chassis cluster ip-monitoring failure-count ip-address 10.1.1.1
node0:
------------------------------------------... | Command introduced in Junos OS Release 10.1. | [] | |
clear chassis cluster ip-monitoring failure-count | clear chassis cluster ip-monitoring failure-count | Clear the failure count for all IP addresses. | [] | clear
Output Fields
When you enter this command, you are provided feedback on the status of your request.
Sample Output
user@host> clear chassis cluster ip-monitoring failure-count
command-name
node0:
--------------------------------------------------------------------------
Cleared failure count for all IPs
node1:
--... | Command introduced in Junos OS Release 10.1. | [] | |
clear chassis cluster statistics | clear chassis cluster statistics | Clear the control plane and data plane statistics of a chassis cluster. | [] | clear
Output Fields
When you enter this command, you are provided feedback on the status of your request.
Sample Output
clear chassis cluster statistics
user@host> clear chassis cluster statistics
Cleared control-plane statistics
Cleared data-plane statistics | Command introduced in Junos OS Release 9.3. | [] | |
clear chassis display message | clear chassis display message
<node-device name | interconnect-device name> | (M40e, M160, M320, T Series routers, EX Series, and QFabric systems only) Clear or stop a text
message on the craft interface display, which is on the front of the router or switch or on the LCD panel
display on the router or switch. The craft interface alternates the display of text messages with standard
craft interf... | [
{
"name": "none",
"desc": "Clear or stop a text message on the craft interface display."
},
{
"name": "interconnect-device name",
"desc": "(QFabric systems only) (Optional) On a QFabric system, clear or stop a text message on the LCD panel display on the specified Interconnect device."
},
{
... | clear
Output Fields
See "show chassis craft-interface" on page 18115 for an explanation of output fields.
Sample Output
clear chassis display message
The following example displays and then clears the text message on the craft interface display:
user@host> show chassis craft-interface
Red alarm: LED off, relay off
... | Command introduced in Junos OS Release 7.5.
sfc option for the TX Matrix Plus routers introduced in Junos OS Release 9.6. | [
"Configuring the LCD Panel on EX Series Switches (CLI Procedure)"
] | |
clear chassis fpc errors | clear chassis fpc errors fpc-slot fpc-slot (all | error-id error-id) | Clear the FPC errors on the device. You can choose to clear a particular error or all errors on the FPC.
NOTE: Use the show chassis errors active detail command to view the FPC errors on the
device chassis. | [
{
"name": "fpc-slot fpc-slot",
"desc": "The slot number of the FPC in which you want to run this command."
},
{
"name": "all",
"desc": "Clear all the errors on the FPC."
},
{
"name": "error-id error-id",
"desc": "Clear a particular error identified by an error-id. An error-id, a uniq... | clear
Output Fields
When you enter this command, you are provided feedback on the status of your request.
Sample Output
clear chassis fpc errors
user@host> clear chassis fpc errors fpc-slot 1 all
Clearing error(s) on fpc 1, option all
clear chassis fpc errors error-id error-id
user@host> clear chassis fpc errors error... | Command introduced in Junos OS Release 18.2R1. | [] | |
clear chassis fpc optical-properties | clear chassis fpc optical-properties fpc-slot fpc-slot (pm-current | pm-currentday | all) | Clear the performance monitoring data for the integrated photonic line card (IPLC) module installed in
the Flexible PIC Concentrator (FPC) or PIC slot. | [
{
"name": "fpc-slot",
"desc": "Slot number of the FPC or PIC in which the IPLC module resides"
},
{
"name": "pm-current",
"desc": "Information for the current 15-minute performance monitoring data"
},
{
"name": "pm-currentday",
"desc": "Information for the current 24-hour performance... | clear
Output Fields
Sample Output
clear chassis fpc optical-properties all
user@host> clear chassis fpc optical-properties fpc-slot 5 all | Statement introduced in Junos OS Release 15.1F6 and 17.1R1. | [] | |
clear chassis hardware history | clear chassis hardware history | Clears chassis hardware history database on Junos OS Evolved platforms. | [] | clear
Output Fields
When you enter this command, you are prompted to provide a confirmation of the request.
Sample Output
clear chassis hardware history
user@host> clear chassis hardware history
Are you sure you want to delete all history from both routing engines? [yes,no] (no) yes | Command introduced in Junos OS Evolved 23.4R1. | [
"No Link Title"
] | |
clear chassis high-availability data-plane statistics | clear chassis high-availability data-plane statistics | Clear the data plane statistics of Multinode High Availability. | [] | clear
Output Fields
Sample Output
clear chassis high-availability data-plane statistics
user@host> clear chassis high-availability data-plane statistics
Cleared data-plane statistics | Command introduced in Junos OS Release 20.4R1. | [] | |
clear chassis high-availability information | clear chassis high-availability information | Clear Multinode High Availability information. | [] | clear
Output Fields
Sample Output
clear chassis high-availability information
user@host> clear chassis high-availability information
Cleared chassis l3-ha information | Command introduced in Junos OS Release 20.4R1. | [] | |
clear chassis sib errors | clear chassis sib errors sib-slot sib-slot (all | error-id error-id) | Clear the chassis SIB errors. You can choose to clear a particular error or all errors on the SIB. | [
{
"name": "fpc-slot fpc-slot",
"desc": "The slot number of the SIB in which you want to run this command."
},
{
"name": "all",
"desc": "Clear all the errors on the SIB."
},
{
"name": "error-id error-id",
"desc": "Clear a particular error identified by an error-id. An error-id, a uniq... | clear
Output Fields
When you enter this command, you are provided feedback on the status of your request.
Sample Output
clear chassis sib errors
user@host> clear chassis sib errors sib-slot
1 all
Clearing error(s) on sib 1, option all | Command introduced in Junos OS Evolved Release 19.4R1. | [] | |
clear class-of-service application-traffic-control counter | clear class-of-service application-traffic-control counter
<all-logical-systems-tenants>
<logical-system logical-system-name>
<node>
<root-logical-system>
<tenant tenant-name> | Clears the application traffic control counters. | [
{
"name": "all-logical-systems-tenants",
"desc": "(Optional) Clears the application traffic control counters of logical systems and tenant systems."
},
{
"name": "logical-system logical-system-name",
"desc": "(Optional) Clears the application traffic control counters of a specified logical syste... | clear
Output Fields
This command produces no output.
Sample Output
clear class-of-service application-traffic-control counter
user@host>clear class-of-service application-traffic-control counter | Command introduced in Junos OS Release 19.3R1. | [] | |
clear class-of-service application-traffic-control rate-limiters | clear class-of-service application-traffic-control rate-limiters | Clears the application traffic control rate limiters information. | [] | clear
Output Fields
This command produces no output.
Sample Output
clear class-of-service application-traffic-control rate-limiters
user@host>clear class-of-service application-traffic-control rate-limiters | Command introduced in Junos OS Release 11.4. | [] | |
clear class-of-service application-traffic-control statistics rule | clear class-of-service application-traffic-control statistics rule
<all-logical-systems-tenants>
<logical-system logical-system-name>
<node>
<root-logical-system>
<tenant tenant-name> | Clears the application traffic control rule hit statistics. AppQoS counters identifying rule hits. | [
{
"name": "all-logical-systems-tenants",
"desc": "Clears the application traffic control rule hit statistics of logical systems and tenant systems."
},
{
"name": "logical-system logical-system-name",
"desc": "(Optional) Clears the application traffic control rule hit statistics of a specified lo... | clear
Output Fields
This command produces no output.
Sample Output
clear class-of-service application-traffic-control statistics rule
user@host> clear class-of-service application-traffic-control statistics rule | Command introduced in Junos OS Release 19.3R1. | [
"show class-of-service application-traffic-control statistics rule"
] | |
clear cli logical-system | clear cli logical-system | Clear the logical system view and return to a full router view. In a logical system view, the output of the
command displays information related to the logical system only. | [] | clear
Output Fields
When you enter this command, you are provided feedback on the status of your request.
Sample Output
clear cli logical-system
user@host:lr1> clear cli logical-system
Cleared default logical system
user@host> | Command introduced before Junos OS Release 7.4. | [
"Logical Systems User Guide for Routers and Switches"
] | |
clear ddos-protection protocols | clear ddos-protection protocols
<protocol-group <packet-type>> (culprit-flows | states | statistics) | Clear current DDoS protection statistics, violation states, or culprit flows for all packet types in all
protocol groups, for all packet types in a particular protocol group, or for a particular packet type in a
particular protocol group. | [
{
"name": "protocol-group",
"desc": "(Optional) Protocol group that is cleared. See \"show ddos-protection protocols\" on page 20183 for a list of available groups."
},
{
"name": "packet-type",
"desc": "(Optional) Packet type in a particular protocol group that is cleared. See \"show ddos-protec... | clear
Output Fields
When you enter this command, you are provided feedback on the status of your request.
Sample Output
clear ddos-protection protocols (Clear Statistics for All Protocols)
user@host> clear ddos-protection protocols statistics
clear ddos-protection protocols (Clear Violation States for Packet Type)
use... | Command introduced in Junos OS Release 11.2.
Option culprit-flows introduced in Junos OS Release 12.3.
Support for Enhanced Subscriber Management added in Junos OS Release 17.3R1. | [] | |
clear dhcp client binding | clear dhcp client binding
[all|interface <interface-name>]
[routing-instance <routing-instance-name>] | Clear the binding state of a Dynamic Host Configuration Protocol (DHCP) client from the DHCP client
table. | [
{
"name": "all",
"desc": "(Optional) Clear the binding state for all DHCP clients."
},
{
"name": "interface <interface-name>",
"desc": "(Optional) Clear the binding state for DHCP clients on the specified interface."
},
{
"name": "routing-instance",
"desc": ""
},
{
"name": "<... | clear
Output Fields
This command produces no output. | Statement introduced in Junos OS Release 12.1X44-D10.
NOTE: This command is not supported in Junos OS Evolved because it is not needed.
Stateless DHCPv4 and DHCPv6 relay are supported and enabled by default, so Junos
OS Evolved does not maintain states or records of statistics or bindings for DHCP
clients. | [] | |
clear dhcp client statistics | clear dhcp client statistics
<all>
<interface>
<routing-instance> | Clear all Dynamic Host Configuration Protocol (DHCP) client statistics. | [
{
"name": "all",
"desc": "(Optional) Clear all the DHCP client statistics."
},
{
"name": "interface",
"desc": "(Optional) Clear the statistics for DHCP clients on the specified interface."
},
{
"name": "routing-instance",
"desc": "(Optional) Clear the statistics for DHCP clients on t... | clear
Output Fields
This command produces no output. | Statement introduced in Junos OS Release 12.1X44-D10.
NOTE: This command is not supported in Junos OS Evolved because it is not needed.
Stateless DHCPv4 and DHCPv6 relay are supported and enabled by default, so Junos
OS Evolved does not maintain states or records of statistics or bindings for DHCP
clients. | [] | |
clear dhcp relay active-leasequery statistics | clear dhcp relay active-leasequery statistics
(interface interface-name | peer ip-address) | Clear active leasequery statistics for the specified access interface or for the specified DHCPv4 active
leasequery peer relay agent. The statistics for bindings sent, received, installed and failed are cleared. | [
{
"name": "interface interface-name",
"desc": "(Optional) Clear all active leasequery statistics for a specific access interface."
},
{
"name": "peer ip-address",
"desc": "(Optional) Clear all active leasequery statistics for a specific peer relay agent."
}
] | clear
Output Fields
This command produces no output.
Sample Output
show dhcp relay active-leasequery (Interface Statistics)
user@host> show dhcp relay active-leasequery statistics interface ge-2/1/1.1020
Interface : ge-2/1/1.1020
Topology-Discover Configured : Yes
State ... | Command introduced in Junos OS Release 19.2R1. | [] | |
clear dhcp relay binding (Security) | clear dhcp relay binding
<all | ip-address | mac-address>
<interface interface-name>
<routing-instance routing-instance-name> | Clear the binding state of a Dynamic Host Configuration Protocol (DHCP) client from the client table. | [
{
"name": "all",
"desc": "(Optional) Clear the binding state for all DHCP clients."
},
{
"name": "ip-address",
"desc": "(Optional) Clear the binding state for the DHCP client, using the specified IP address."
},
{
"name": "mac-address",
"desc": "(Optional) Clear the binding state for... | clear
Output Fields
This command produces no output. | Statement introduced in Junos OS Release 12.1X44-D10. | [
"Viewing and Clearing DHCP Bindings"
] | |
clear dhcp relay binding | clear dhcp relay binding
<address>
<all>
<dual-stack>
<interface interface-name>
<interfaces-vlan>
<interfaces-wildcard>
<logical-system logical-system-name>
<routing-instance routing-instance-name> | Clear the binding state of a Dynamic Host Configuration Protocol (DHCP) client from the client table. | [
{
"name": "address",
"desc": "(Optional) Clear the binding state for the DHCP client, using one of the following"
},
{
"name": "entries:",
"desc": ""
},
{
"name": "ip-address",
"desc": "The specified IP address."
},
{
"name": "mac-address",
"desc": "The specified MAC addr... | view
Output Fields
See "show dhcp relay binding" on page 20224 for an explanation of output fields.
Sample Output
clear dhcp relay binding
The following sample output displays the address bindings in the DHCP client table before and after the
clear dhcp relay binding command is issued.
user@host> show dhcp relay bindin... | Command introduced in Junos OS Release 8.3.
Options all and interface added in Junos OS Release 8.4.
Options interfaces-vlan and interfaces-wildcard added in Junos OS Release 12.1.
Option dual-stack added in Junos OS Release 15.1. | [
"Viewing and Clearing DHCP Bindings"
] | |
clear dhcp relay lockout-entries | clear dhcp relay lockout-entries (all | index index) | Clear all client entries from the DHCPv4 relay agent lockout database or only the specified entries. The
lockout is terminated for all affected client sessions. The lockout history for these clients is also cleared.
The clients that were locked out are allowed to attempt to log in. Any subsequent short-cycle event
resu... | [
{
"name": "all",
"desc": "Clear all client entries from the lockout database."
},
{
"name": "index index",
"desc": "Number identifying a client entry to be cleared from the lockout database. You can view the index numbers associated with all clients by issuing the show dhcp-relay lockout-entries... | view
Output Fields
See "show dhcp relay lockout-entries" on page 20233 for an explanation of the output fields.
Sample Output
clear dhcp relay lockout-entries (Specific Lockout Entry)
The following sample output displays the lockout entries in the database before and after clear dhcp relay
lockout-entries command is is... | Command introduced in Junos OS Release 18.2R1. | [] | |
clear dhcp relay statistics (Security) | clear dhcp relay statistics
<routing-instance routing-instance-name> | Clear all Dynamic Host Configuration Protocol (DHCP) relay statistics. | [
{
"name": "routing-instance",
"desc": ""
},
{
"name": "routing-instance-name",
"desc": "(Optional) Clear the DHCP relay statistics on the specified routing instance. If you do not specify a routing instance name, statistics are cleared for the default routing instance."
}
] | clear
Output Fields
This command produces no output. | Statement introduced in Junos OS Release 12.1X44-D10. | [] | |
clear dhcp relay statistics | Syntax for EX Series switches:
show dhcp relay statistics
<routing-instance routing-instance-name> | Clear all Dynamic Host Configuration Protocol (DHCP) relay statistics. | [
{
"name": "bulk-leasequery-connections",
"desc": "(Optional) Clear DHCP relay bulk leasequery statistics."
},
{
"name": "leasequery",
"desc": "(Optional) Clear DHCP relay individual leasequery statistics."
},
{
"name": "logical-system logical-system-name",
"desc": "(On routers only) ... | view
Output Fields
See show dhcp relay statistics for an explanation of output fields.
Sample Output
clear dhcp relay statistics
The following sample output displays the DHCP relay statistics before and after the clear dhcp relay
statistics command is issued.
user@host> show dhcp relay statistics
Packets dropped:
T... | Command introduced in Junos OS Release 8.3.
bulk-leasequery-connections option introduced in Junos OS Release 16.1. | [] | |
clear dhcp server active-leasequery statistics | clear dhcp server active-leasequery statistics | Clear the active leasequery statistics of the DHCP local server. | [] | clear
Sample Output
clear dhcp server active-leasequery statistics
user@host> clear dhcp server active-leasequery statistics peer 192.0.2.0
peer : 192.0.2.0
Topology-Discover Configured : Yes
State : Done
Bindings Sent : 0
Bind... | Command introduced in Junos OS Release 21.4R1. | [] | |
clear dhcp server binding | clear dhcp server binding
<address>
<all>
<interface interface-name>
<interfaces-vlan>
<interfaces-wildcard>
<logical-system logical-system-name>
<routing-instance routing-instance-name>
<dual-stack> | Clear the binding state of a Dynamic Host Configuration Protocol (DHCP) client from the client table on
the extended DHCP local server.
NOTE: If you delete the DHCP server configuration, DHCP server bindings might still
remain. To ensure that DHCP bindings are removed, issue the clear dhcp server binding
command before... | [
{
"name": "address",
"desc": "(Optional) Clear the binding state for the DHCP client, using one of the following"
},
{
"name": "entries:",
"desc": ""
},
{
"name": "ip-address",
"desc": "The specified IP address."
},
{
"name": "mac-address",
"desc": "The specified MAC addr... | view
Output Fields
See "show dhcp server binding" on page 20253 for an explanation of output fields.
Sample Output
clear dhcp server binding <ip-address>
The following sample output displays the address bindings in the DHCP client table on the extended
DHCP local server before and after the clear dhcp server binding co... | Command introduced in Junos OS Release 9.0.
Options interfaces-vlan and interfaces-wildcard added in Junos OS Release 12.1.
Command updated with dual-stack statement in Junos OS Release 17.3. | [
"Viewing and Clearing DHCP Bindings"
] | |
clear dhcp server lockout-entries | clear dhcp server lockout-entries (all | index index) | Clear all client entries from the DHCPv4 local server lockout database or only the specified entries. The
lockout is terminated for all affected client sessions. The lockout history for these clients is also cleared.
The clients that were locked out are allowed to attempt to log in. Any subsequent short-cycle event
res... | [
{
"name": "all",
"desc": "Clear all client entries from the lockout database."
},
{
"name": "index index",
"desc": "Number identifying a client entry to be cleared from the lockout database. You can view the index numbers associated with all clients by issuing the show dhcp-server lockout-entrie... | view
Output Fields
See "show dhcp server lockout-entries" on page 20264 for an explanation of the output fields.
Sample Output
clear dhcp server lockout-entries (Specific Lockout Entry)
The following sample output displays the lockout entries in the database before and after clear dhcp
server lockout-entries command i... | Command introduced in Junos OS Release 18.2R1. | [] | |
clear dhcp server statistics | clear dhcp server statistics
<bulk-leasequery-connections>
<logical-system logical-system-name>
<routing-instance routing-instance-name> | Clear all extended Dynamic Host Configuration Protocol (DHCP) local server statistics. | [
{
"name": "bulk-leasequery-connections",
"desc": "(Optional) Clear DHCPv4 local server bulk leasequery statistics."
},
{
"name": "logical-system logical-system-name",
"desc": "(Optional) Clear the statistics for DHCP clients on the specified logical system. If you do not specify a logical system... | view
Output Fields
See "show dhcp server statistics" on page 20267 for an explanation of output fields.
Sample Output
clear dhcp server statistics
The following sample output displays the extended DHCP local server statistics before and after the
clear dhcp server statistics command is issued.
user@host> show dhcp serv... | Command introduced in Junos OS Release 9.0.
bulk-leasequery-connections option introduced in Junos OS Release 16.1. | [] | |
clear dhcp snooping binding | clear dhcp snooping binding
<mac (all | mac-address)>
<vlan (all | vlan-name)>
<vlan (all | vlan-name) mac (all | mac-address)> | Clear the DHCP snooping database information. | [
{
"name": "mac (all | mac-address)",
"desc": "(Optional) Clear DHCP snooping information for the specified MAC address or all MAC addresses."
},
{
"name": "vlan (all | vlan-name )",
"desc": "(Optional) Clear DHCP snooping information for the specified VLAN or all VLANs."
}
] | clear
Output Fields
This command produces no output.
Sample Output
clear dhcp snooping binding
user@switch> clear dhcp snooping binding | Command introduced in Junos OS Release 9.0. | [
"Example: Configuring Port Security (non-ELS)",
"Enabling DHCP Snooping (non-ELS)"
] | |
clear dhcp snooping statistics | clear dhcp snooping statistics | Clear all Dynamic Host Configuration Protocol (DHCP) snooping statistics. | [] | view
Output Fields
See "show dhcp snooping statistics" on page 20276 for an explanation of the output fields.
Sample Output
clear dhcp snooping statistics
The following sample output displays the DHCP snooping statistics before and after the clear dhcp
snooping statistics command is issued.
user@switch> ... | Command introduced in Junos OS Release 9.4. | [
"Understanding DHCP Snooping (non-ELS)"
] | |
clear dhcp-security binding | clear dhcp-security binding
<interface interface-name>
<ip-address ip-address>
<statistics>
<vlan vlan-name> | Clear the DHCP snooping database information. | [
{
"name": "interface interface-name",
"desc": "(Optional) Clear DHCP snooping database information for the specified interface."
},
{
"name": "ip-address ip-address",
"desc": "(Optional) Clear DHCP snooping database information for the specified IP address."
},
{
"name": "statistics",
... | clear | Command introduced in Junos OS Release 13.2X50-D10. | [
"Example: Configuring IP Source Guard and Dynamic ARP Inspection to Protect the Switch from IP",
"Spoofing and ARP Spoofing",
"Example: Configuring IP Source Guard and Dynamic ARP Inspection on a Specified Bridge Domain to",
"Protect the Devices Against Attacks",
"Port Security Features"
] | |
clear dhcp-security ipv6 binding | clear dhcp-security ipv6 binding
<all>
<interface interface-name>
<ipv6-address ipv6-address>
<vlan vlan-name> | Clear the DHCPv6 snooping database information. | [
{
"name": "all",
"desc": "(Optional) Clear all DHCPv6 snooping database statistics."
},
{
"name": "interface interface-name",
"desc": "(Optional) Clear DHCPv6 snooping database information for the specified interface."
},
{
"name": "ipv6-address ipv6-address",
"desc": "(Optional) Cle... | clear
Output Fields
This command produces no output.
Sample Output
clear dhcp-security ipv6 binding
user@switch> clear dhcp-security ipv6 binding | Command introduced in Junos OS Release 13.2X51-D20. | [
"Example: Configuring IPv6 Source Guard and Neighbor Discovery Inspection to Protect a Switch from",
"IPv6 Address Spoofing"
] | |
clear dhcpv6 client binding | clear dhcpv6 client binding
[all | interface interface-name]
[routing-instance routing-instance-name] | Clear the binding state of a Dynamic Host Configuration Protocol (DHCPv6) client from the DHCPv6
client table. | [
{
"name": "all",
"desc": "(Optional) Clear the binding state for all DHCPv6 clients."
},
{
"name": "interface interface-name",
"desc": "(Optional) Clear the binding state for DHCPv6 clients on the specified interface."
},
{
"name": "routing-instance",
"desc": ""
},
{
"name": ... | clear
Output Fields
This command produces no output. | Statement introduced in Junos OS Release 12.1X45-D10.
NOTE: This command is not supported in Junos OS Evolved because it is not needed.
Stateless DHCPv4 and DHCPv6 relay are supported and enabled by default, so Junos
OS Evolved does not maintain states or records of statistics or bindings for DHCP
clients. | [] | |
clear dhcpv6 client statistics | clear dhcpv6 client statistics
routing-instance routing-instance-name | Clear all DHCPv6 client statistics. | [
{
"name": "routing-instance",
"desc": ""
},
{
"name": "routing-instance-name",
"desc": "(Optional) Clear the statistics for DHCPv6 clients on the specified routing instance. If you do not specify a routing instance, statistics are cleared for the default routing instance."
}
] | clear
Output Fields
This command produces no output. | Statement introduced in Junos OS Release 12.1X45-D10.
NOTE: This command is not supported in Junos OS Evolved because it is not needed.
Stateless DHCPv4 and DHCPv6 relay are supported and enabled by default, so Junos
OS Evolved does not maintain states or records of statistics or bindings for DHCP
clients. | [] | |
clear dhcpv6 relay active-leasequery statistics | clear dhcpv6 relay active-leasequery statistics
(interface interface-name | peer ipv6-address) | Clear active leasequery statistics for the specified access interface or for the specified DHCPv6 active
leasequery peer relay agent. The statistics for bindings sent, received, installed and failed are cleared. | [
{
"name": "interface interface-name",
"desc": "(Optional) Clear all active leasequery statistics for a specific access interface."
},
{
"name": "peer ip-address",
"desc": "(Optional) Clear all active leasequery statistics for a specific peer relay agent."
}
] | clear
Output Fields
This command produces no output.
Sample Output
show dhcp relay active-leasequery (Interface Statistics)
user@host> show dhcpv6 relay active-leasequery statistics interface ge-0/0/0.1
Interface : ge-0/0/0.1
Topology-Discover Configured : Yes
State ... | Command introduced in Junos OS Release 19.2R1. | [] | |
clear dhcpv6 relay binding | clear dhcpv6 relay binding
<address>
<all>
<dual-stack>
<interface interface-name>
<interfaces-vlan>
<interfaces-wildcard>
<logical-system logical-system-name>
<routing-instance routing-instance-name> | Clear the binding state of Dynamic Host Configuration Protocol for IPv6 (DHCPv6) clients from the
client table. | [
{
"name": "address",
"desc": "(Optional) Clear the binding state for the DHCPv6 client, using one of the"
},
{
"name": "following entries:",
"desc": ""
},
{
"name": "CID",
"desc": "The specified Client ID (CID)."
},
{
"name": "ipv6-prefix",
"desc": "The specified IPv6 pre... | view
Output Fields
See show dhcpv6 relay binding for an explanation of output fields.
Sample Output
clear dhcpv6 relay binding
The following sample output displays the DHCPv6 bindings before and after the clear dhcpv6 relay binding
command is issued.
user@host> show dhcpv6 relay binding
Prefix Sessio... | Command introduced in Junos OS Release 11.4.
Options interfaces-vlan and interfaces-wildcard added in Junos OS Release 12.1.
Option dual-stack added in Junos OS Release 15.1. | [
"Viewing and Clearing DHCP Bindings"
] | |
clear dhcpv6 relay lockout-entries | clear dhcpv6 relay lockout-entries (all | index index) | Clear all client entries from the DHCPv6 relay agent lockout database or only the specified entries. The
lockout is terminated for all affected client sessions. The lockout history for these clients is also cleared.
The clients that were locked out are allowed to attempt to log in. Any subsequent short-cycle event
resu... | [
{
"name": "all",
"desc": "Clear all client entries from the lockout database."
},
{
"name": "index index",
"desc": "Number identifying a client entry to be cleared from the lockout database. You can view the index numbers associated with all clients by issuing the show dhcpv6-relay lockout-entri... | view
Output Fields
See "show dhcpv6 relay lockout-entries" on page 20327 for an explanation of the output fields.
Sample Output
clear dhcpv6 relay lockout-entries (Specific Lockout Entry)
The following sample output displays the lockout entries in the database before and after clear dhcpv6
relay lockout-entries command... | Command introduced in Junos OS Release 18.2R1. | [] | |
clear dhcpv6 relay statistics | clear dhcpv6 relay statistics
<bulk-leasequery-connections>
<leasequery>
<logical-system logical-system-name>
<routing-instance routing-instance-name> | Clear all Dynamic Host Configuration Protocol for IPv6 (DHCPv6) relay statistics. | [
{
"name": "bulk-leasequery-connections",
"desc": "(Optional) Clear DHCPv6 relay bulk leasequery statistics."
},
{
"name": "leasequery",
"desc": "(Optional) Clear DHCPv6 relay individual leasequery statistics."
},
{
"name": "logical-system logical-system-name",
"desc": "(Optional) Per... | view
Output Fields
See show dhcpv6 relay statistics for an explanation of output fields.
Sample Output
clear dhcpv6 relay statistics
The following sample output displays the DHCPv6 relay statistics before and after the clear dhcpv6 relay
statistics command is issued.
user@host> show dhcpv6 relay statistics
DHCPv6 Pack... | Command introduced in Junos OS Release 11.4.
bulk-leasequery-connections option introduced in Junos OS Release 16.1. | [] | |
clear dhcpv6 server active-leasequery statistics | clear dhcpv6 server active-leasequery statistics
<peer peer-address>
<interface interface-name> | Clear the active leasequery statistics of the DHCPv6 local server. | [
{
"name": "peer peer-address",
"desc": "IP address of the peer DHCP server on which you want to view the active leasequery statistics."
},
{
"name": "interface interface-name",
"desc": "Interface name of the peer DHCP server on which you want to view the active leasequery statistics."
}
] | clear
Sample Output
clear dhcpv6 server active-leasequery statistics peer ip-address
user@host> clear dhcpv6 server active-leasequery statistics peer 2001:db8:3::2
peer : 2001:db8:3::2
Topology-Discover Configured : Yes
State : Done
Bindings Sent ... | Command introduced in Junos OS Release 21.4R1. | [] | |
clear dhcpv6 server binding (Local Server) | clear dhcpv6 server binding
<all | client-id | ip-address | session-id>
<interface interface-name>
<routing-instance routing-instance-name> | Clear the binding state of a DHCPv6 client from the client table on the DHCPv6 local server. | [
{
"name": "all",
"desc": "(Optional) Clear the binding state for all DHCPv6 clients."
},
{
"name": "client-id",
"desc": "(Optional) Clear the binding state for the DHCPv6 client with the specified client ID (option"
},
{
"name": "ip-address",
"desc": "(Optional) Clear the binding sta... | clear | Command introduced in Junos OS Release 10.4. | [] | |
clear dhcpv6 server binding | clear dhcpv6 server binding
<address>
<all>
<interface interface-name>
<interfaces-vlan>
<interfaces-wildcard>
<logical-system logical-system-name>
<routing-instance routing-instance-name>
<dual-stack> | Clear the binding state of a Dynamic Host Configuration Protocol for IPv6 (DHCPv6) client from the
client table on the extended DHCPv6 local server. | [
{
"name": "address",
"desc": "(Optional) Clear the binding state for the DHCPv6 client, using one of the following"
},
{
"name": "entries:",
"desc": ""
},
{
"name": "CID",
"desc": "The specified Client ID (CID)."
},
{
"name": "ipv6-prefix",
"desc": "The specified IPv6 pre... | clear
Output Fields
When you enter this command, you are provided feedback on the status of your request.
Sample Output
clear dhcpv6 server binding all
The following command clears all DHCPv6 local server bindings:
user@host> clear dhcpv6 server binding all
clear dhcpv6 server binding <ipv6-prefix>
The following comman... | Command introduced in Junos OS Release 9.6.
Options interfaces-vlan and interfaces-wildcard added in Junos OS Release 12.1.
Command updated with dual-stack statement in Junos OS Release 17.3. | [
"Viewing and Clearing DHCP Bindings"
] | |
clear dhcpv6 server lockout-entries | clear dhcpv6 server lockout-entries (all | index index) | Clear all client entries from the DHCPv6 local server lockout database or only the specified entries. The
lockout is terminated for all affected client sessions. The lockout history for these clients is also cleared.
The clients that were locked out are allowed to attempt to log in. Any subsequent short-cycle event
res... | [
{
"name": "all",
"desc": "Clear all client entries from the lockout database."
},
{
"name": "index index",
"desc": "Number identifying a client entry to be cleared from the lockout database. You can view the index numbers associated with all clients by issuing the show dhcpv6-server lockout-entr... | view
Output Fields
See "show dhcpv6 server lockout-entries" on page 20358 for an explanation of the output fields.
Sample Output
clear dhcpv6 server lockout-entries (Specific Lockout Entry)
The following sample output displays the lockout entries in the database before and after clear dhcpv6
server lockout-entries comm... | Command introduced in Junos OS Release 18.2R1. | [] | |
clear dhcpv6 server statistics (Local Server) | clear dhcpv6 server statistics
<logical-system logical-system-name>
<routing-instance routing-instance-name> | Clear all DHCPv6 local server statistics. | [
{
"name": "logical-system",
"desc": ""
},
{
"name": "logical-system-name",
"desc": "(Optional) Clear the statistics for DHCPv6 clients on the specified logical system. If you do not specify a logical system, statistics are cleared for the default logical system."
},
{
"name": "routing-in... | clear | Command introduced in Junos OS Release 10.4. | [] | |
clear dhcpv6 server statistics | clear dhcpv6 server statistics
<bulk-leasequery-connections>
<interface interface-name>
<logical-system logical-system-name>
<routing-instance routing-instance-name> | Clear all extended Dynamic Host Configuration Protocol for IPv6 (DHCPv6) local server statistics. | [
{
"name": "bulk-leasequery-connections",
"desc": "(Optional) Clear DHCPv6 local server bulk leasequery statistics."
},
{
"name": "logical-system logical-system-name",
"desc": "(Optional) Clear the statistics for DHCPv6 clients on the specified logical system. If you do not specify a logical syst... | clear
Output Fields
When you enter this command, you are provided feedback on the status of your request.
Sample Output
clear dhcpv6 server statistics
user@host> clear dhcpv6 server statistics | Command introduced in Junos OS Release 9.6.
bulk-leasequery-connections option introduced in Junos OS Release 16.1. | [] | |
clear dhcpv6 snooping binding | clear dhcpv6 snooping binding
<mac (all | mac-address)>
<vlan (all | vlan-name)>
<vlan (all | vlan-name) mac (all | mac-address)> | Clear the DHCPv6 snooping database information. | [
{
"name": "mac (all | mac-address)",
"desc": "(Optional) Clear DHCPv6 snooping information for the specified MAC address or all MAC addresses."
},
{
"name": "vlan (all | vlan-name )",
"desc": "(Optional) Clear DHCPv6 snooping information for the specified VLAN or all VLANs."
}
] | clear
Output Fields
This command produces no output.
Sample Output
clear dhcpv6 snooping binding
user@switch> clear dhcpv6 snooping binding | Command introduced in Junos OS Release 14.1X53-D10. | [
"Example: Configuring Port Security (non-ELS)",
"Enabling DHCP Snooping (non-ELS)"
] | |
clear dhcpv6 snooping statistics | clear dhcpv6 snooping statistics | Clear all Dynamic Host Configuration Protocol for IPv6 (DHCPv6) snooping statistics. | [] | view
Output Fields
See "show dhcpv6 snooping statistics" on page 20373 for an explanation of the output fields.
Sample Output
clear dhcpv6 snooping statistics
The following sample output displays the DHCPv6 snooping statistics before and after the clear dhcpv6
snooping statistics command is issued.
user@switch> ... | Command introduced in Junos OS Release 14.1X53-D10. | [
"Understanding DHCP Snooping (non-ELS)"
] | |
clear diameter function statistics | clear diameter function <function-name> statistics | Clear current statistics accumulated for a specified function (application) or for all functions associated
with the Diameter instance. | [
{
"name": "function-name",
"desc": "(Optional) Clear statistics for the specified function. Gx-Plus, JSRC, and packet-triggered-subscribers are supported functions."
}
] | clear
Output Fields
When you enter this command, you are not provided feedback on the status of your request.
Sample Output
clear diameter function statistics
user@host> clear diameter function jsrc statistics | Command introduced in Junos OS Release 9.6.
Support for PTSP introduced in Junos OS Release 10.2.
Support for Gx-Plus introduced in Junos OS Release 11.2.
Support for PTSP discontinued in Junos OS Release 13.1. | [
"Gx-Plus for Provisioning Subscribers",
"JSRC for Subscriber Provisioning and Accounting"
] | |
clear diameter peer | clear diameter peer peer-name
<connection | statistics> | Delete the specified Diameter peer and clear all statistics or only current statistics for the specified peer. | [
{
"name": "peer-name",
"desc": "Delete the Diameter peer."
},
{
"name": "connection",
"desc": "(Optional) Clear all peer statistics and restart the peer state machine for the specified Diameter peer. This is the default action."
},
{
"name": "statistics",
"desc": "(Optional) Clear cu... | clear
Output Fields
When you enter this command, you are not provided feedback on the status of your request.
Sample Output
clear diameter peer
user@host> clear diameter peer peer5 connection | Command introduced in Junos OS Release 9.6. | [] | |
clear dot1x | clear dot1x
interface <interface-name>
mac-address <static-mac-address>
statistics <interface interface-name> | Reset the authentication state of an interface or delete 802.1X statistics from the device. When you
reset an interface using the interface or mac-address options, reauthentication on the interface is also
triggered. The device sends out a multicast message on the interface to restart the authentication of all
connecte... | [
{
"name": "interface",
"desc": ""
},
{
"name": "<[interface-name]>",
"desc": "Reset the authentication state of all the supplicants (also, clear all the authentication bypassed clients) connected to the specified interface (when the interface is an authenticator) or reset the authentication stat... | view
Sample Output
clear dot1x interface
user@host> clear dot1x interface ge-0/0/1
clear dot1x mac-address
user@host> clear dot1x mac-address 00:04:ae:cd:23:5f
clear dot1x statistics interface
user@host> clear dot1x statistics interface ge-0/0/1 | Command introduced in Junos OS Release 15.1X49-D80. | [] | |
clear edge-virtual-bridging | clear edge-virtual-bridging
<edge-control-protocol-statistics>
<firewall <interface interface-name>
<vsi-profiles <interface interface-name> | Clear edge-virtual-bridging (EVB). | [
{
"name": "none",
"desc": "Clear EVB."
},
{
"name": "edge-control-protocol-statistics",
"desc": "(Optional) Clear Edge Control Protocol (ECP) statistics."
},
{
"name": "firewall <interface interface-name>",
"desc": "(Optional) Clear EVB implicit filter counters on all interfaces or o... | system—To view this statement in the configuration.
system-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 12.1. | [
"Example: Configuring Edge Virtual Bridging for Use with VEPA Technology on an EX Series Switch",
"Configuring Edge Virtual Bridging on an EX Series Switch"
] | |
clear error bpdu interface | Clear a bridge protocol data unit (BPDU) error condition caused by the detection of a possible bridging
loop from Spanning Tree Protocol (STP) operation. | [] | clear
Output Fields
When you enter this command, you are provided feedback on the status of your request.
Sample Output
clear error bpdu interface ge-1/1/1
user@host> clear error bpdu interface ge-1/1/1 | Command introduced in Junos OS Release 9.4.
Command supports all option in Junos OS Release 15.1 for EX Series switches. | [
"Configuring BPDU Protection on ACX Router, EX Switch and MX Router Edge Ports",
"Unblocking a Switch Interface That Receives BPDUs in Error (CLI Procedure)"
] | ||
clear error mac-rewrite | clear error mac-rewrite
<interface interface-name> | Clear a MAC rewrite error condition on an interface receiving tunneled Layer 2 protocol packets.
On interfaces with L2PT configured, customer-facing ports should not receive packets with the L2PT
MAC address as the destination address unless there is a network tolopogy or configuration error. The
device sets the status... | [
{
"name": "interface interface-name",
"desc": "(Optional) Clear the MAC rewrite error condition for the specified interface."
}
] | clear
Output Fields
When you enter this command, the device returns feedback on the status of the request.
Sample Output
clear error mac-rewrite interface
user@host> clear error mac-rewrite interface ge-1/0/1 | Command introduced in Junos OS Release 9.1. | [
"Configuring Layer 2 Protocol Tunneling",
"Clearing a MAC Rewrite Error on an Interface with Layer 2 Protocol Tunneling"
] | |
clear ethernet-switching bpdu-error interface | clear ethernet-switching bpdu-error interface interface-name | Clear bridge protocol data unit (BPDU) errors from an interface and bring up the interface.
NOTE: This command is only available on switches running Junos OS without support
for the Enhanced Layer 2 Software (ELS) configuration style. To clear BPDU errors from
switches that support ELS, see "clear error bpdu interface"... | [
{
"name": "interface-name",
"desc": "Clear BPDU errors on the specified interface."
}
] | clear
Sample Output
clear ethernet-switching bpdu-error interface
user@switch> clear ethernet-switching bpdu-error interface xe-0/0/1.0 | Command introduced in Junos OS Release 9.1.
Command updated in Junos OS Release 11.1 for EX Series switches—a BPDU error shuts down the
interface and this command brings the interface back up. | [] | |
clear ethernet-switching evpn arp-table | clear ethernet-switching evpn arp-table | Clear the ARP proxy table from the Ethernet VPN (EVPN) for integrated routing and bridging (IRB)
interfaces. This command applies to EVPN instances of type virtual-switch. | [
{
"name": "none",
"desc": "Clear information about the ARP proxy tables for an EVPN."
}
] | clear
Output Fields
When you enter this command, you are provided feedback on the status of your request.
Sample Output
clear ethernet-switching evpn arp-table
user@host> clear ethernet-switching evpn arp-table | Command introduced in Junos OS Release 17.3R1. | [] | |
clear ethernet-switching evpn nd-statistics | clear ethernet-switching evpn nd-statistics | Clear the Neighbor Discovery (ND) proxy table statistics for integrated routing and bridging (IRB)
interfaces participating in the Ethernet VPN (EVPN). ND proxy is a kernel module that implements IPv6
Neighbor Discovery proxying over Ethernet-like access networks. | [
{
"name": "none",
"desc": "Clear the ND proxy table statistics for IRB interfaces participating in the EVPN."
}
] | clear
Output Fields
When you enter this command, the ND proxy table statistics for IRB interfaces participating in the
EVPN are cleared.
Sample Output
clear ethernet-switching evpn nd-statistics
user@host> clear ethernet-switching evpn nd-statistics | Command introduced in Junos OS Release 17.3R1. | [] | |
clear ethernet-switching evpn nd-table | clear ethernet-switching evpn nd-table | Clear the Neighbor Discovery (ND) proxy table from the Ethernet VPN (EVPN) for integrated routing
and bridging (IRB) interfaces. This command applies to EVPN instances of type virtual-switch. | [
{
"name": "none",
"desc": "Clear information about the ND proxy tables for an EVPN."
}
] | clear
Output Fields
When you enter this command, you are provided feedback on the status of your request.
Sample Output
clear ethernet-switching evpn nd-table
user@host> clear ethernet-switching evpn nd-table | Command introduced in Junos OS Release 17.3R1. | [] | |
clear ethernet-switching layer2-protocol-tunneling error | clear ethernet-switching layer2-protocol-tunneling error
<interface interface-name> | Clear Layer 2 protocol tunneling (L2PT) errors on one or more interfaces. If an interface has been
disabled because the amount of Layer 2 protocol traffic exceeded the shutdown threshold or because
the switch has detected an error in the network topology or configuration, use this command to
reenable the interface. | [
{
"name": "none",
"desc": "Clears L2PT errors on all interfaces."
},
{
"name": "interface interface-name",
"desc": "(Optional) Clear L2PT errors on the specified interface."
}
] | view
Sample Output
clear ethernet-switching layer2-protocol-tunneling error
user@switch> clear ethernet-switching layer2-protocol-tunneling error
clear ethernet-switching layer2-protocol-tunneling error interface xe-0/0/1.0
user@switch> clear ethernet-switching layer2-protocol-tunneling error interface xe-0/0/1.0 | Command introduced in Junos OS Release 10.0. | [
"Example: Configuring Layer 2 Protocol Tunneling on EX Series Switches Without ELS Support",
"Configuring Layer 2 Protocol Tunneling on EX Series Switches Without ELS Support"
] | |
clear ethernet-switching layer2-protocol-tunneling statistics | clear ethernet-switching layer2-protocol-tunneling statistics
<interface interface-name>
<vlan vlan-name> | Clear Layer 2 protocol tunneling (L2PT) statistics on one or more interfaces or VLANs. | [
{
"name": "none",
"desc": "Clear L2PT statistics on all interfaces and VLANs."
},
{
"name": "interface interface-name",
"desc": "(Optional) Clear L2PT statistics on the specified interface."
},
{
"name": "vlan vlan-name",
"desc": "(Optional) Clear L2PT statistics on the specified VLA... | view
Sample Output
clear ethernet-switching layer2-protocol-tunneling statistics
user@switch> clear ethernet-switching layer2-protocol-tunneling statistics
clear ethernet-switching layer2-protocol-tunneling error interface ge-0/1/1.0
user@switch> clear ethernet-switching layer2-protocol-tunneling statistics interface x... | Command introduced in Junos OS Release 10.0. | [
"Example: Configuring Layer 2 Protocol Tunneling on EX Series Switches Without ELS Support",
"Configuring Layer 2 Protocol Tunneling on EX Series Switches Without ELS Support"
] | |
clear ethernet-switching mac-ip-table | clear ethernet-switching mac-ip-table
<address>
<vlan-name (all | vlan-domain-name)>
<instance instance-name> | Clear the locally learnt ARP entries for VLANs in routing instances where the instance-type is ethernet
switching. Remotely learnt entries cannot be cleared. | [
{
"name": "address",
"desc": "(Optional) Clear the specific MAC address from the MAC-IP address table ."
},
{
"name": "vlan-name (all | vlan-domain-name)",
"desc": "(Optional) Clear the MAC-IP address table for all VLANs or for the specified VLAN."
},
{
"name": "instance instance-name",
... | maintenance | Command introduced in Junos OS Release 17.4R2. | [] | |
clear ethernet-switching port-error | clear ethernet-switching port-error
<interface interface-name> | Clear all MAC limiting, MAC move limiting, and storm control errors from all the Ethernet switching
interfaces on the switch or from the specified interface, and restore all interfaces or the specified
interface to service.
NOTE: Not supported on devices that supports ELS. For devices that support ELS) use —
clear ethe... | [
{
"name": "none",
"desc": "Clear all MAC limiting, MAC move limiting, and storm control errors from all the Ethernet switching interfaces on the switch and restore these interfaces to service."
},
{
"name": "interface",
"desc": ""
},
{
"name": "interface-name",
"desc": "(Optional) Cl... | clear
Output Fields
This command produces no output.
Sample Output
clear ethernet-switching port-error
user@switch> clear ethernet-switching port-error | Command introduced in JUNOS Release 9.6. | [
"Understanding MAC Limiting and MAC Move Limiting",
"Configuring Autorecovery for Port Security Events",
"Configuring Port Security (non-ELS)",
"Configuring Autorecovery for Port Security Events"
] | |
clear ethernet-switching recovery-timeout (SRX) | clear ethernet-switching recovery-timeout
<interface interface-name> | Clear all MAC limiting errors from all the Ethernet switching interfaces on the device or from the
specified interface, and restore the interfaces or the specified interface to service. You can also use this
command to manually recover interfaces that duplicate MAC detection loop protection has shut down.
To manually r... | [
{
"name": "interface interface-name",
"desc": "(Optional) Clear all MAC limiting errors from the specified interface and restore the interface to service."
}
] | clear | Command introduced in Junos OS Release 15.1X49-D70 | [
"Understanding MAC Limiting",
"Example: Configuring MAC Limiting on a Security Device",
"Configuring Autorecovery From the Disabled State on Secure Interfaces of a Security Device (CLI",
"Procedure)"
] | |
clear ethernet-switching recovery-timeout | clear ethernet-switching recovery-timeout | Clear all MAC limiting, MAC move limiting, and storm control errors from all the Ethernet switching
interfaces on the switch, and restore the interfaces to service. | [
{
"name": "interface interface-name vlan vlan-name",
"desc": "(EX9200 switches) Unblock an interface on the basis of its"
}
] | clear
Output Fields
This command produces no output. | Command introduced in Junos OS Release 13.2X50-D10. | [
"Configuring Autorecovery for Port Security Events"
] | |
clear ethernet-switching statistics mac-learning | clear ethernet-switching statistics mac-learning | Clear the media access control (MAC) learning statistics. | [
{
"name": "none",
"desc": "Clear MAC learning statistics on all interfaces."
},
{
"name": "interface interface-name",
"desc": "(Optional) Clear MAC learning statistics on the specified interface."
}
] | view
Sample Output
clear ethernet-switching statistics mac-learning
user@host> clear ethernet-switching statistics mac-learning
clear ethernet-switching statistics mac-learning interface interface-name
user@host> clear ethernet-switching statistics mac-learning interface interface-name | Command introduced in Junos OS Release 10.1. | [] | |
clear ethernet-switching table persistent-learning | clear ethernet-switching table
mac <mac-address> | interface <interface-name> | vlan-name <vlan-name> | vlan-id <vlan-id> |
instance <instance>
<persistent-learning (interface <interface-name> | mac <mac-address>)> | NOTE: On a QFabric system, using this command on an FCoE-enabled VLAN when FCoE
sessions are active can cause traffic flooding and FCoE traffic drop. The FCoE sessions
are not terminated and the traffic reconverges after a short period of time.
Clear learned entries, which are media access control (MAC) addresses, in t... | [
{
"name": "none",
"desc": "Clear learned entries in the Ethernet switching table, except for persistent MAC addresses."
},
{
"name": "interface",
"desc": ""
},
{
"name": "interface-name",
"desc": "(Optional) Clear all learned MAC addresses for the specified interface from the Etherne... | view
Output Fields
This command produces no output.
Sample Output
clear ethernet-switching table
user@switch> clear ethernet-switching table | Command introduced in Junos OS Release 9.3. | [] | |
clear evpn duplicate-mac-suppression | clear evpn duplicate-mac-suppression
<instance instance |l2-domain-id l2-domain-id | logical-system (all |logical-system-name) | mac-
address mac-address> | Clear suppressed duplicate MAC addresses in an EVPN network. You can also use this command to re-
enable any blocked duplicate MAC addresses. After you have enabled these duplicate MAC addresses,
these MAC addresses will be available for relearning and forwarding. | [
{
"name": "instance instance",
"desc": "(Optional) Clear suppressed MAC address for a specific routing instance. On MX Series routers , the routing instance can be an EVPN instance or virtual-switch instance. On QFX Series switches, the routing instance can be an EVPN instance, virtual-switch instance or an... | maintenance | Command introduced in Junos OS Release 17.4. | [
"Overview of MAC Mobility",
"Changing Duplicate MAC Address Detection Settings"
] | |
clear evpn mac-ip-table | clear evpn mac-ip-table
<address>
<instance instance-name>
<logical-system (all | logical-system-name> | Clear the locally learned ARP entries for routing instances where the instance-type is evpn. Remotely
learned entries cannot be cleared. | [
{
"name": "address",
"desc": "(Optional) Clear the specific MAC address from the MAC-IP address table."
},
{
"name": "instance instance-name",
"desc": "(Optional) Clear the MAC-IP address table for a specific routing instance."
},
{
"name": "logical-system (all |",
"desc": ""
},
... | maintenance | Command introduced in Junos OS Release 17.4R2. | [] | |
clear evpn nd-table | clear evpn nd-table | Clear the Neighbor Discovery (ND) proxy table from the Ethernet VPN (EVPN). ND proxy is a kernel
module that implements IPv6 Neighbor Discovery proxying over Ethernet-like access networks. | [
{
"name": "none",
"desc": "Clear learned ND proxy tables from the EVPN."
}
] | clear
Output Fields
When you enter this command, you are provided feedback on the status of your request.
Sample Output
clear evpn nd-table
user@host> clear evpn nd-table | Command introduced in Junos OS Release 16.2. | [] | |
clear evpn statistics | clear evpn statistics instance evpn-instance
<logical-system (all | logical-system-name)> | Clear EVPN statistics of all interfaces in a routing instance of type EVPN. | [
{
"name": "evpn-instance",
"desc": "Name of the EVPN routing instance."
},
{
"name": "logical-system (all | logical-system-name)",
"desc": "(Optional) Perform this operation on all logical systems or on a particular logical system."
}
] | maintenance
Output Fields
This command produces no output.
Sample Output
clear evpn statistics
user@host> clear evpn statistics instance evpn-instance | Command introduced in Junos OS Release 17.2. | [] | |
clear extensible-subscriber-services counters | clear extensible-subscriber-services counters | Clear values of all event counters to zero. Active sessions and services counters are not reset. | [] | view
Sample Output
command-name
#clear extensible-subscriber-services counters | Command introduced in Junos OS Release 15.1. | [] | |
clear extensible-subscriber-services sessions | clear extensible-subscriber-services sessions <accounting-session-id> | Clear extensible subscriber service sessions in any state by executing the operational script or the
application to remove all services created. Specify an accounting session ID to clear a specific session. If
you do not specify an accounting session ID in the command, the command clears all sessions. | [
{
"name": "accounting-session-id",
"desc": "(Optional) Identifier of the ESSM session you want cleared."
}
] | view
Sample Output
command-name
#clear extensible-subscriber-services sessions "jnpr demux0.1073762028:46422" | Command introduced in Junos OS Release 15.1. | [] | |
clear extension-service request-response clients | clear extension-service request-response clients client-id | Clears the status of the request-response clients connected to the device. | [
{
"name": "client-id",
"desc": "The client identifier."
},
{
"name": "all",
"desc": "Clears status of all clients."
},
{
"name": "client-id",
"desc": "Client ID of a specific session to be cleared."
}
] | Clear
Sample Output
clear extension-service request-response clients
user@switch> show extension-service request-response clients
Client ID Socket Address Client Type Client
Login Time (UTC) Channel Count
unix::11 unix::11 gRPC No... | Command introduced before Junos OS Release 18.2R1. | [] | |
clear fibre-channel fc2 statistics | clear fibre-channel fc2 statistics
<fabric fabric-name> | Clear FC-2 (network layer) Fibre Channel statistics globally or on a specified Fibre Channel fabric. | [
{
"name": "fabric fabric-name",
"desc": "(Optional) Clear FC-2 statistics only on the specified fabric."
}
] | view
Sample Output
clear fibre-channel fc2 statistics
user@switch> clear fibre-channel fc2 statistics | Command introduced in Junos OS Release 11.1. | [] | |
clear fibre-channel fip enode | clear fibre-channel fip enode enode-mac | Clear Fibre Channel over Ethernet (FCoE) node (ENode) information for a specified ENode. This
operation deletes the ENode state from the switch database and from the FIP snooping firewall filters,
which causes the ENode to lose the connection to the Fibre Channel (FC) fabric and to log in to the
fabric again. If you cl... | [
{
"name": "enode-mac",
"desc": "MAC address of the ENode."
}
] | view
Sample Output
clear fibre-channel fip enode
user@switch> clear fibre-channel fip enode 00:10:94:00:00:02 | Command introduced in Junos OS Release 11.1. | [] | |
clear fibre-channel fip statistics | clear fibre-channel fip statistics
<fabric fabric-name> | Clear Fibre Channel over Ethernet (FCoE) initialization protocol (FIP) statistics. | [
{
"name": "fabric fabric-name",
"desc": "(Optional) Clear FIP statistics only on the specified fabric."
}
] | view
Sample Output
clear fibre-channel fip statistics
user@switch> clear fibre-channel fip statistics | Command introduced in Junos OS Release 11.1. | [] | |
clear fibre-channel fip vn-port | clear fibre-channel fip vn-port vn-port--mac | Clear virtual N_Port (VN_Port) information for a specified VN_Port. This operation deletes the VN_Port
state from the switch database and from the FIP snooping firewall filters, which causes the VN_Port to
lose its connection to the Fibre Channel fabric and to log in to the fabric again. When you clear a
VN_Port, other... | [
{
"name": "vn-port-mac",
"desc": "MAC address of the VN_Port."
}
] | view
Sample Output
clear fibre-channel fip vn-port
user@switch> clear fibre-channel fip vn-port 00:10:94:00:00:08 | Command introduced in Junos OS Release 11.1. | [] | |
clear fibre-channel flogi statistics | clear fibre-channel flogi statistics
<fabric fabric-name> | Clear fabric login (FLOGI) statistics globally or on a specified Fibre Channel fabric. | [
{
"name": "fabric fabric-name",
"desc": "(Optional) Clear FLOGI statistics only on the specified fabric."
}
] | view
Sample Output
clear fibre-channel flogi statistics
user@switch> clear fibre-channel flogi statistics | Command introduced in Junos OS Release 11.1. | [] | |
clear fibre-channel proxy statistics | clear fibre-channel proxy statistics
<fabric fabric-name> | Clear Fibre Channel gateway statistics globally or on a specified Fibre Channel fabric. | [
{
"name": "fabric fabric-name",
"desc": "(Optional) Clear proxy statistics only on the specified fabric."
}
] | view
Sample Output
clear fibre-channel proxy statistics
user@switch> clear fibre-channel proxy statistics | Command introduced in Junos OS Release 11.1. | [] | |
clear fip snooping enode | clear fip snooping satellite enode enode-mac
<vlan vlan-name> | Clear FIP snooping information for the specified FCoE Node (ENode) or (optionally) only on a specified
FCoE VLAN.
This operation deletes the ENode state from the switch database and from the FIP snooping firewall
filters, which causes the ENode to lose its connection to the FCoE forwarder (FCF) and to log in to the
FCF... | [
{
"name": "enode-mac",
"desc": "MAC address of the ENode."
},
{
"name": "vlan vlan-name",
"desc": "(Optional) Name of the VLAN."
}
] | view
Sample Output
clear fip snooping enode enode-mac
user@switch> clear fip snooping enode 00:10:94:00:00:02 | Command introduced in Junos OS Release 10.4.
Command introduced with satellite keyword in Junos OS Release 17.4R1 for Junos Fusion Data Center. | [] | |
clear fip snooping statistics | clear fip snooping satellite statistics
<vlan vlan-name> | Clear FIP snooping statistics globally or on a specified VLAN.
The command syntax in a Junos Fusion environment includes the satellite keyword and clears FIP
snooping information for satellite device FCoE VLANs, which have FCoE and FIP functions and status
information distributed between the aggregation devices and sat... | [] | view
Sample Output
clear fip snooping statistics
user@switch> clear fip snooping statistics | Command introduced in Junos OS Release 10.4.
Command introduced with satellite keyword in Junos OS Release 17.4R1 for Junos Fusion Data Center. | [] | |
clear fip snooping vlan | clear fip snooping satellite vlan vlan-name | Clear FIP snooping information for the specified FCoE VLAN.
This operation deletes all ENode and FCF information for the specified VLAN from the switch database
and causes the ENodes to lose their connections to the FCFs. After clearing a VLAN, the switch relearns
all of the FCFs and ENodes on the VLAN, and the ENodes ... | [
{
"name": "vlan-name",
"desc": "Name of the VLAN."
}
] | view
Sample Output
clear fip snooping vlan vlan-name
user@switch> clear fip snooping vlan fcoevlan1 | Command introduced in Junos OS Release 10.4.
Command introduced with satellite keyword in Junos OS Release 17.4R1 for Junos Fusion Data Center. | [] | |
clear fip vlan-discovery statistics | clear fip vlan-discovery statistics | Clear FIP VLAN discovery statistics. | [] | view
Sample Output
clear fip vlan-discovery statistics
user@switch> clear fip vlan-discovery statistics | Command introduced in Junos OS Release 12.1. | [] | |
clear firewall (QFX) | clear firewall (all | counter counter-name | filter filter-name) | Clear statistics provided by firewall filters.
NOTE: The clear firewall command cannot be used to clear the Routing Engine filter
counters on a backup Routing Engine that is enabled for GRES.
When you clear the counters of a filter, this not only impacts the counters shown by the CLI, but also
the ones tracked by SNMP ... | [
{
"name": "all",
"desc": "Clear the packet and byte counts for all firewall filter counters and clear the packet counts for all policer counters."
},
{
"name": "counter counter-name",
"desc": "Clear the packet and byte counts for the specified firewall filter counter."
},
{
"name": "filt... | clear
Output Fields
When you enter this command, you are provided feedback on the status of your request.
Sample Output
clear firewall all
user@switch> clear firewall all
clear firewall counter
user@switch> clear firewall counter port-filter-counter
clear firewall filter
user@switch> clear firewall filter ingress-port-... | Command introduced in Junos OS Release 11.1. | [
"Verifying That Two-Color Policers Are Operational",
"Overview of Firewall Filters (QFX Series)",
"Overview of Policers"
] | |
clear firewall | clear firewall (all | counter counter-name | filter filter-name | Clear statistics about configured firewall filters.
When you clear the counters of a filter, this impacts not only the counters shown by the CLI, but also
the ones tracked by SNMP2.
Subscriber management uses firewall filters to capture and report the volume-based service accounting
counters that are used for subscribe... | [
{
"name": "all",
"desc": "Clear the packet and byte counts for all filters. On EX Series switches, this option also clears the packet counts for all policer counters."
},
{
"name": "counter counter-name",
"desc": "Clear the packet and byte counts for a filter counter that has been configured wit... | clear
Sample Output
clear firewall all
user@host> clear firewall all
clear firewall (counter counter-name)
user@host> clear firewall counter port-filter-counter
clear firewall (filter filter-name)
user@host> clear firewall filter ingress-port-filter
clear firewall (policer counter all) (EX8200 Switch)
user@switch> c... | Command introduced before Junos OS Release 7.4.
logical-system option introduced in Junos OS Release 9.3.
Command introduced in Junos OS Release 11.1.
log option introduced before Junos OS Release 11.4. | [
"Verifying That Two-Color Policers Are Operational",
"Overview of Firewall Filters (QFX Series)",
"Overview of Policers"
] | |
clear forwarding-options port-mirroring instance family | clear forwarding-options port-mirroring instance instance-name family family-name | Clear the self-mirroring statistics and delete the associated PCAP files. | [
{
"name": "family family-name",
"desc": "(Optional) Protocol family to which this command is applied."
},
{
"name": "instance instance-name",
"desc": "(Optional) Port-mirroring instance to which this command is applied."
}
] | clear
Output Fields
When you enter this command, you are provided no feedback on the status of your request. You can
enter the show forwarding-options port-mirroring self-mirror statistics command to verify the operation.
Sample Output
clear forwarding-options port-mirroring instance I1 family inet
user@host> clear for... | Command introduced in Junos OS Evolved Release 24.2R1. | [] | |
clear gtp tunnels | clear security gtp tunnel <all | identifier> | Use this command to clear all or specified GTP tunnels on the device. | [
{
"name": "all",
"desc": "Clears all existing tunnels."
},
{
"name": "identifier",
"desc": "Clears a single tunnel by entering the tunnel ID. To view current tunnel IDs, type show"
}
] | clear | Command introduced in Junos OS Release 10.0.
Support for GTPv2 added in Junos OS Release 11.4. | [] | |
clear igmp membership | clear igmp membership
<group address-range>
<interface interface-name> | Clear Internet Group Management Protocol (IGMP) group members. | [
{
"name": "all",
"desc": "Clear IGMP members for groups and interfaces in the master instance."
},
{
"name": "group address-range",
"desc": "(Optional) Clear all IGMP members that are in a particular address range. An example of a range is 233.252/16. If you omit the destination prefix length, t... | clear
Output Fields
See "show igmp group" on page 21047 for an explanation of output fields.
Sample Output
clear igmp membership all
The following sample output displays IGMP group information before and after the clear igmp membership
command is entered:
user@host> show igmp group
Interface Group Last... | Command introduced before Junos OS Release 7.4. | [] | |
clear igmp snooping membership | clear igmp snooping membership
<vlan vlan-name>
<group | source address>
<instance instance-name>
<interface interface-name>
<learning-domain learning-domain-name>
<logical-system logical-system-name>
<vlan-id vlan-identifier> | Clear IGMP snooping dynamic membership information from the multicast forwarding table. | [
{
"name": "none",
"desc": "Clear IGMP snooping membership for all supported address families on all interfaces."
},
{
"name": "vlan vlan-name",
"desc": "(Optional) Clear dynamic membership information for the specified VLAN."
},
{
"name": "group | source address",
"desc": "(Optional)... | clear
Output Fields
When you enter this command, you are provided feedback on the status of your request.
Sample Output
clear igmp snooping membership
user@host> clear igmp snooping membership | Command introduced in Junos OS Release 8.5. | [] | |
clear igmp snooping statistics | clear igmp snooping statistics
<instance instance-name>
<interface interface-name>
<learning-domain (all | learning-domain-name)>
<logical-system logical-system-name> | Clear IP IGMP snooping statistics. | [
{
"name": "none",
"desc": "Clear IGMP snooping statistics for all supported address families on all interfaces."
},
{
"name": "instance instance-name",
"desc": "(Optional) Clear IGMP snooping statistics for the specified instance."
},
{
"name": "interface interface-name",
"desc": "(O... | clear
Output Fields
When you enter this command, you are provided feedback on the status of your request.
Sample Output
clear igmp snooping statistics
user@host> clear igmp snooping statistics | Command introduced in Junos OS Release 8.5. | [] |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.