command stringlengths 2 75 | syntax stringlengths 0 289k | hierarchy_level stringlengths 0 6.91k | description stringlengths 0 45.2k | options listlengths 0 499 | required_privilege_level stringlengths 0 330k | release_information stringlengths 0 3.14k | related_documentation listlengths 0 22 |
|---|---|---|---|---|---|---|---|
strip-username (Domain Map) | strip-username (left-to-right | right-to-left) | [edit access domain map domain-map-name] | Strip the user portion of the username for authentication to simplify off-chassis provisioning. Parsing
direction can be left-to-right (default) or right-to-left. | [
{
"name": "left-to-right",
"desc": "Strip the user portion of the username from left to right."
},
{
"name": "right-to-left",
"desc": "Strip the user portion of the username from right to left."
}
] | admin—To view this statement in the configuration.
admin-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 14.1. | [
"Changing the Username and Password to Simplify Off-Chassis Provisioning"
] |
structured-data | structured-data {
brief;
} | [edit logical-systems logical-system-name system syslog file filename],
[edit system syslog file filename] | Write system log messages to the log file in structured-data format, which complies with Internet draft
draft-ietf-syslog-protocol-23, The syslog Protocol (http://tools.ietf.org/html/draft-ietf-syslog-
protocol-23).
Starting in Junos OS 19.2R1 release and later, after configuring this statement, you cannot configure an... | [] | system—To view this statement in the configuration.
system-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 8.3. | [
"Log Messages in Structured-Data Format"
] |
stub | stub <default-metric metric> <(no-summaries | summaries)>; | [edit logical-systems logical-system-name protocols (ospf | ospf3) area area-id],
[edit logical-systems logical-system-name protocols ospf3 realm (ipv4-unicast | ipv4-multicast |
ipv6-multicast)],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
(ospf | ospf3) area area-id],... | Specify that this area not be flooded with AS external link-state advertisements (LSAs). You must include
the stub statement when configuring all routing devices that are in the stub area.
The backbone cannot be configured as a stub area.
You cannot configure an area to be both a stub area and a not-so-stubby area (NSS... | [
{
"name": "default-metric",
"desc": ""
},
{
"name": "metric",
"desc": "Metric value, ranging from 1 through 16,777,215."
},
{
"name": "no-summaries",
"desc": "(Optional) Do not advertise routes into the stub area. If you include the default-metric option, only the default route is ad... | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 7.4.
Support for the realm statement introduced in Junos OS Release 9.2.
Support for the realm statement introduced in Junos OS Release 9.2 for EX Series switches. | [
"Understanding OSPF Areas",
"Example: Configuring OSPF Stub and Totally Stubby Areas"
] |
stub-network | stub-network; | [edit logical-systems name protocols ospf overload],
[edit logical-systems name routing-instances name protocols ospf overload],
[edit protocols ospf overload],
[edit routing-instances name protocols ospf overload] | Advertise Stub Network with maximum metric. | [] | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 18.2. | [
"Understanding OSPF Overload Function"
] |
sub-domain | sub-domain name {
aaa-logical-system name {
aaa-routing-instance (default | name);
}
target-logical-system name {
target-routing-instance (default | name);
}
access-profile access-profile;
address-pool address-pool;
dynamic-profile dynamic-profile;
override-chap-password override-... | [edit access domain map] | You can configure subdomains under a domain map. Subdomain allows you to select different access-
profile for users within the same domain different VLAN ID or VLAN ID range. Subdomain gives the
flexibility to differentiate the users in a domain. It provides different services per the profile
configuration.
The options... | [
{
"name": "sub-domain name",
"desc": "Name of a subdomain."
},
{
"name": "aaa-logical-system",
"desc": "Logical system used for applying AAA services."
},
{
"name": "aaa-routing-instance",
"desc": "Routing instance used for applying AAA services."
},
{
"name": "default",
... | access—To view this statement in the configuration.
access-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 21.3R1. | [
"Domain Mapping Overview"
] |
sub-prefix-length | sub-prefix-length sub-prefix-length; | [edit interfaces interface-name unit logical-unit-number family family dhcpv6-client prefix-
delegating]
[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number
family inet6 dhcpv6-client prefix-delegating]
[edit tenants tenant-name interfaces interface-name unit logical-unit-numbe... | Allows you to configure DHCPv6 client sub prefix length. The DHCPv6 client separates the delegated
prefix according to sub-prefix lengths. If the delegated prefix is not enough for all interfaces, the client
sends out a syslog message. | [] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 12.3X48-D30 and in Junos OS Release 15.1X49-D100.
The logical-systems and tenants options are introduced in Junos OS Release 18.4R1. | [] |
subnet-address (Easy EVPN LAG Configuration) | subnet-address {
inet (ipv4-subnet-addr | [ipv4-subnet-addr1 ipv4-subnet-addr2 ...]);
inet6 (ipv6-subnet-addr | [ipv6-subnet-addr1 ipv6-subnet-addr2 ...]);
no-irb-address-auto-derive;
virtual-gateway-v4-address ipv4-virtual-gateway-address;
virtual-gateway-v6-address ipv6-virtual-gateway-address;
... | [edit services evpn evpn-vxlan irb irb-instance] | Specify IRB instance subnet address parameters as part of a generated Ethernet VPN (EVPN) fabric
configuration.
You use statements at the [edit services evpn] hierarchy level to simplify configuring an EVPN fabric with
Ethernet segment identifier (ESI) link aggregation groups (LAGs) in the topology. The feature you ena... | [
{
"name": "inet",
"desc": ""
},
{
"name": "address(es)",
"desc": "Specify an IPv4 subnet address or multiple IPv4 subnet addresses for the IRB interface"
},
{
"name": "inet6",
"desc": ""
},
{
"name": "address(es)",
"desc": "Specify an IPv6 subnet address or multiple IPv6 ... | system—To view this statement in the configuration.
system-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 23.2R1 and Junos OS Evolved Release 23.2R1. | [
"Easy EVPN LAG (EZ-LAG) Configuration"
] |
subscriber (Access Profile) | subscriber username {
delegated-pool delegated-pool-name;
framed-ip-address ipv4-address;
framed-ipv6-pool ipv6-pool-name;
framed-pool ipv4-pool-name;
password password;
target-logical-system logical-system-name<(target-routing-instance (default | routing-
instance-name)>;
target-routing-ins... | [edit access profile profile-name] | Enable local authentication for subscribers by configuring a password to match the subscriber. Local
authentication can take the form of either user password authentication or Challenge Handshake
Authentication Protocol’ (CHAP) authentication. For user password authentication, the configured
password is used to verify ... | [
{
"name": "delegated-pool",
"desc": ""
},
{
"name": "delegated-pool-name",
"desc": "(Optional) Specify the name of an address pool used to locally allocate a delegated IPv6 prefix for the subscriber. Corresponds to RADIUS standard attribute Delegated-IPv6-Prefix (123)."
},
{
"name": "fra... | admin—To view this statement in the configuration.
admin-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 18.2R1. | [
"Example: Configuring CHAP Authentication with RADIUS",
"RADIUS Authentication and Accounting Basic Configuration",
"Configuring Local Authentication and Authorization for Subscribers"
] |
subscriber (DDoS Flow Detection) | subscriber (flow-bandwidth | flow-control-mode | flow-detection-mode) | [edit system ddos-protection protocols protocol-group packet-type flow-level-bandwidth],
[edit system ddos-protection protocols protocol-group packet-type flow-level-control],
[edit system ddos-protection protocols protocol-group packet-type flow-level-detection] | (MX Series routers with only MPCs, T4000 Core Routers with only FPC5s, or EX9200 switches)
Configure flow bandwidth, flow control mode, or flow detection mode at the subscriber flow
aggregation level for the packet type. | [
{
"name": "flow-bandwidth",
"desc": "Specify the bandwidth for the flow at the subscriber level. Available only at the [edit"
},
{
"name": "flow-control-mode",
"desc": "Specify how traffic in the detected flow is controlled at the subscriber level. Available"
},
{
"name": "drop",
"de... | admin—To view this statement in the configuration.
admin-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 12.3.
Support for Enhanced Subscriber Management added in Junos OS Release 17.3R1. | [
"Configuring the Maximum Flow Bandwidth at Each Flow Aggregation Level",
"Configuring How Traffic in a Culprit Flow Is Controlled at Each Flow Aggregation Level",
"Configuring How Flow Detection Operates at Each Flow Aggregation Level",
"Setting Up and Using Flow Detection"
] |
subscriber-address | subscriber-address {
inet {
pool pool-name;
}
inet6 {
pool pool-name;
}
} | [edit unified-edge gateways tdf gateway-name domains domain-name ip-subscriber] | Specify the address pool that contains the source IP addresses for IP-based subscriber packets that can
undergo TDF processing.
The remaining statements are explained separately. See CLI Explorer. | [] | unified-edge—To view this statement in the configuration.
unified-edge-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 16.1. | [
"Configuring a Set of IP-Based TDF Subscriber Properties with a TDF Domain",
"Understanding the Definition of a Set of IP-Based Subscriber Properties with a TDF Domain",
"IP-Based Subscriber Setup Overview"
] |
subscriber-aware-services | subscriber-aware-services; | [edit chassis fpc name pic name] | Enable subscriber-aware services. | [] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS 20.2R1 for Next Gen Services on MX240, MX480 and MX960. | [] |
subscriber-awareness (Service Set Options) | subscriber-awareness; | [edit services service-set service-set-name service-set-options] | Enable subscriber awareness on the service set.
Default
If you do not include the subscriber-awareness statement, then subscriber-aware services cannot be
provided. | [] | system—To view this statement in the configuration.
system-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 17.1. | [
"Applying Services to Subscriber-Aware Traffic with a Service Set"
] |
subscriber-context (AAA Options) | subscriber-context subscriber-context-name; | [edit access aaa-options aaa-options-name] | Specify the logical-system:routing-instance (LS:RI) in which the subscriber interface is placed. For
example, this may correspond to the LAC-facing interface on the LNS that is accessed by all requests
from a subscriber residence.
NOTE: Only the default (primary) logical system is supported. | [
{
"name": "subscriber-context-name",
"desc": "Name of the logical-system:routing-instance in which the subscriber interface is placed."
}
] | access—To view this statement in the configuration.
access-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 16.2. | [
"Understanding Session Options for Subscriber Access",
"Configuring Username Modification for Subscriber Sessions",
"L2TP LNS Inline Service Interfaces",
"L2TP LNS Inline Service Interfaces"
] |
subscriber-exclude-prefix | subscriber-exclude-prefix {
apply-groups [group-names];
apply-groups-except [group-names];
family {
inet {
apply-groups [group-names];
apply-groups-except [group-names];
network address net-mask;
}
inet6 {
apply-groups [group-names];
... | [edit unified-edge gateways tdf gateway-name domains domain-name] | Specify the network prefix of source IP addresses for uplink packets and destination IP addresses for
downlink packets that do not undergo TDF processing.
The remaining statements are explained separately. See CLI Explorer. | [] | unified-edge—To view this statement in the configuration.
unified-edge-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 16.1. | [
"Configuring a Set of IP-Based TDF Subscriber Properties with a TDF Domain",
"Configuring IFL-Based TDF Subscribers and Properties with a TDF Domain",
"Understanding the Definition of a Set of IP-Based Subscriber Properties with a TDF Domain",
"IP-Based and IFL-Based TDF Subscribers Overview",
"IP-Based Sub... |
subscriber-extension | subscriber-extension; | [edit security nat source] | Enable subscriber NAT extension to treat B4 (softwire initiator) as subscriber in the Dual-Stack Lite (DS-
Lite). This configuration is necessary to generate RADIUS logs for NAT PBA usage on per subscriber
basis.
Enabling the subscriber-extension feature and performing a reboot is mandatory in order to enable
RADIUS ac... | [] | security—To view this statement in the configuration.
security-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 24.2R1. | [] |
subscriber-info | subscriber-info {
service-statistics;
subscriber-statistics;
} | [edit dynamic-profiles name telemetry] | The subscriber-info statement enables the streaming of subscriber metadata to an external telemetry
server when the subscriber logs into or logs out of the device under test (DUT). Subscriber metadata
includes subscriber-related information such as username, profile name, underlying interface name,
customer VLAN (C-VLA... | [
{
"name": "service-statistics",
"desc": "Enables service accounting statistics telemetry. Use this option to allow periodic streaming of firewall filter statistics for IPv4 and IPv6 filters to an external telemetry server."
},
{
"name": "subscriber-statistics",
"desc": "Enables periodic streamin... | edit - To set the statement in the configuration | Statement introduced in Junos OS Release 24.3R1. | [
"No Link Title"
] |
subscriber-leave-timer | subscriber-leave-timer seconds; | [edit logical-systems logical-system-name routing-instances routing-instance-name routing-
options multicast interface interface-name],
[edit logical-systems logical-system-name routing-options multicast interface interface-name],
[edit routing-instances routing-instance-name routing-options multicast interface interfa... | Length of time before the multicast VLAN updates QoS data (for example, available bandwidth) for
subscriber interfaces after it receives an IGMP leave message. | [
{
"name": "seconds",
"desc": "Length of time before the multicast VLAN updates QoS data (for example, available"
}
] | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 9.2. | [] |
subscriber-management | subscriber-management {
enable;
enforce-strict-scale-limit-license;
gres-route-flush-delay;
}
overrides {
event {
catastrophic-failure {
reboot (master | standby);
}
}
force-show-arp-resolve;
interfaces {
family (i... | [edit system services] | CAUTION: Enabling tracing can adversely impact scale and performance and may
increase security risk. We strongly recommend using the trace, tracing, or traceoptions
commands only under the guidance of a JTAC support engineer. After collecting the
debug information, immediately disable tracing to minimize risk and resto... | [] | system—To view this statement in the configuration.
system-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 11.1. | [
"Configuring the Router to Maintain DHCP Subscribers During Interface Delete Events",
"Tracing Subscriber Management Database Events for Troubleshooting",
"Junos OS Enhanced Subscriber Management",
"Configuring Junos OS Enhanced Subscriber Management",
"DHCP Liveness Detection Using ARP and Neighbor Discove... |
subscriber-management-helper | subscriber-management-helper {
command binary-file-path;
disable;
failover (alternate-media | other-routing-engine);
} | [edit system processes] | Specify the subscriber management helper process. | [
{
"name": "command binary-file-path",
"desc": "Path to the binary process."
},
{
"name": "disable",
"desc": "Disable the subscriber management helper process."
},
{
"name": "failover",
"desc": "Configure the device to reboot if the software process fails four times within 30 seconds,... | system—To view this statement in the configuration.
system-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 8.5. | [] |
subscriber-packet-idle-timeout | subscriber-packet-idle-timeout subscriber-packet-idle-timeout; | [edit system services packet-triggered-subscribers] | The subscriber packet idle timeout for packet triggered subscribers. | [
{
"name": "subscriber-packet-idle-timeout",
"desc": "Maximum idle time."
}
] | admin—To view this statement in the configuration.
admin-control—To add this statement to the configuration. | [
"Packet-Triggered Subscribers Services Overview"
] | |
subscriber-pool-utilization-alarm | subscriber-pool-utilization-alarm
<clear-threshold clear-threshold alarm value>
<dampening-interval dampening-interval value>
<log-type <snmp-trap><syslog>>
<raise-threshold raise-threshold alarm value>; | [edit security nat source],
[edit services nat source] | You can configure threshold limits to receive notifications when port or port block usage exceeds the
configured thresholds. | [
{
"name": "clear-threshold",
"desc": "Clear threshold for subscriber pool utilization alarm. Range: 40 through 100"
},
{
"name": "dampening-interval",
"desc": "Configure dampening interval for subscriber pool alarm. Range: 5 through 60"
},
{
"name": "log-type",
"desc": "Define log ... | security—To view this statement in the configuration.
security-control—To add this statement to the configuration | Statement introduced in Junos OS Release 24.4R1. | [] |
subscriber-profile | subscriber-profile profile-name {
enable service-name {
concurrent-data-sessions max-session-number;
}
disable service-name;
max-data-sessions-per-subscriber {
limit max-sub-sessions;
exceed-action {
drop;
syslog;
}
}
} | [edit services service-set services-set-name] | Specify the subscriber profile name. A subscriber profile specifies which services should be enabled and
which services should be disabled for traffic belonging to a subscriber bound to a particular subscriber
profile. A subscriber is bound to a minimum of one subscriber profile at any given time. | [
{
"name": "profile-name",
"desc": "Name of the profile."
}
] | admin—To view this statement in the configuration.
admin-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 11.4. | [] |
subscriber-type (TDF Domain) | subscriber-type (ip | ifl); | [edit unified-edge gateways tdf gateway-name domains domain-name] | Configure the type of subscriber that this domain is applied to — an IP-based subscriber or an IFL-based
(interface-based) subscriber. If you do not include this statement, subscriber-type ip is used. | [
{
"name": "ip",
"desc": "(Default) Apply the TDF domain to IP-based subscribers, for which a RADIUS accounting request is sent to the MX Series router. An individual subscriber session is created for each unique source IP address."
},
{
"name": "ifl",
"desc": "Apply the TDF domain to IFL-based s... | unified-edge—To view this statement in the configuration.
unified-edge-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 17.1. | [
"Configuring a Set of IP-Based TDF Subscriber Properties with a TDF Domain",
"Configuring IFL-Based TDF Subscribers and Properties with a TDF Domain",
"Understanding the Definition of a Set of IP-Based Subscriber Properties with a TDF Domain",
"Understanding the Definition of a Set of IFL-Based Subscriber Pro... |
subscribers-limit (Resource Monitor) | subscribers-limit {
client-type (any | dhcp | l2tp | pppoe) {
chassis {
limit limit;
}
fpc slot-number {
limit limit;
pic number {
limit limit;
port number {
limit limit;
}
}
... | [edit system services resource-monitor] | Configure the maximum number of subscribers of a specified client type allowed to be logged in on the
chassis, per MPC, per MIC, and per port. When that number is reached, subsequent logins are denied
until the current number of subscribers drops below the maximum allowed.
Limit the number of subscribers allowed to log... | [] | system—To view this statement in the configuration.
system-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 17.3R1. | [
"Limiting Subscribers by Client Type and Hardware Element with Resource Monitor",
"Resource Monitoring for Subscriber Management and Services"
] |
subscription | subscription percentage {
ct0 percentage;
ct1 percentage;
ct2 percentage;
ct3 percentage;
piority priority-value percentage;
} | [edit logical-systems logical-system-name protocols rsvp interface interface-name],
[edit logical-systems logical-system-name protocols rsvp interface interface-name link-
protection],
[edit protocols rsvp interface interface-name],
[edit protocols rsvp interface interface-name link-protection] | Configure the amount of bandwidth subscribed to a class type (when you have enabled Differentiated
Services) or bypass LSP (when you have enabled link protection). subscription is the percentage of the link
bandwidth that can be used for the RSVP reservation process. | [
{
"name": "ctnumber percentage",
"desc": "Percentage of the class-type bandwidth allowed for reservations. If you specify a"
},
{
"name": "percentage",
"desc": "Percentage of the class-type or bypass LSP bandwidth allowed for reservations. If you specify"
},
{
"name": "priority priority-... | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 7.4.
priority option introduced in Junos OS Release 20.4R1 for MX960, MX2008, MX2010, MX2020, and
PTX Series. | [
"Configuring the Bandwidth Subscription Percentage for LSPs",
"Configuring the Amount of Bandwidth Subscribed for Bypass LSPs"
] |
subscription-id | subscription-id {
constant value;
subscription-id-options {
entry-name {
id-components {
use-class;
use-imsi;
use-msisdn;
use-nai;
use-nas-port;
use-nas-port-id;
use-realm;
... | [edit unified-edge gateways tdf gateway-name domains domain-name ip-subscriber] | Specify how the Subscription-Id is constructed for the Diameter credit control request (CCR) message
that is sent from the TDF to the PCRF for IP-based subscribers belonging to the TDF domain.
The remaining statements are explained separately. See CLI Explorer. | [] | unified-edge—To view this statement in the configuration.
unified-edge-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 16.1. | [
"Configuring a Set of IP-Based TDF Subscriber Properties with a TDF Domain",
"Understanding the Definition of a Set of IP-Based Subscriber Properties with a TDF Domain",
"IP-Based Subscriber Setup Overview"
] |
subscription-id-data-include (PCRF Partition) | subscription-id-data-include {
base-interface-name;
delimiter delimiter-character;
domain-name name;
interface-name;
mac-address;
nas-port-id;
origin-host;
origin-realm;
user-name;
user-prefix prefix;
vlan-tags;
} | [edit access pcrf partition partition-name] | Configure the subscriber data to use in a Policy and Charging Rules Function (PCRF). | [
{
"name": "base-interface-",
"desc": ""
},
{
"name": "name",
"desc": "Use the specified physical or underlying interface name. If both the underlying interface and the client application perform authentication, authorization, and provisioning, the identification attributes in the server requests... | admin—To view this statement in the configuration.
admin-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 16.2.
vlan-tags option added in Junos OS Release 18.3R1 on MX Series routers. | [
"3GPP Policy and Charging Control for Wireline Provisioning and Accounting",
"3GPP Policy and Charging Control for Wireline Provisioning and Accounting",
"3GPP Policy and Charging Control for Wireline Provisioning and Accounting",
"3GPP Policy and Charging Control for Wireline Provisioning and Accounting",
... |
subscription-id-options | subscription-id-options {
[entry-name] {
id-components {
use-class;
use-imsi;
use-msisdn;
use-nai;
use-nas-port;
use-nas-port-id;
use-realm;
use-username;
}
}
} | [edit unified-edge gateways tdf gateway-name domains domain-name ip-subscriber subscription-id] | Specify a method for constructing the Subscription-Id for the RADIUS credit control request (CCR)
message that is sent from the TDF to the PCRF for IP-based subscribers belonging to the TDF domain.
To specify multiple methods, include the entry-name option multiple times. | [
{
"name": "entry-name",
"desc": "Identifier for the Subscription-Id construction method."
}
] | unified-edge—To view this statement in the configuration.
unified-edge-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 17.1. | [
"Configuring a Set of IP-Based TDF Subscriber Properties with a TDF Domain",
"Understanding the Definition of a Set of IP-Based Subscriber Properties with a TDF Domain",
"IP-Based Subscriber Setup Overview"
] |
subscription-id-type (Class Attribute) | subscription-id-type (imsi | msisdn | nai | private | sip-uri); | [edit unified-edge gateways tdf gateway-name domains domain-name subscription-id use-class] | Configure the subscription ID type when the Class attribute is used for the subscription ID. | [
{
"name": "imsi",
"desc": "Use the IMSI subscriber type."
},
{
"name": "msisdn",
"desc": "Use the MSISDN (E164) subscriber type."
},
{
"name": "nai",
"desc": "Use the NAI subscriber type."
},
{
"name": "private",
"desc": "Use the Private subscriber type."
},
{
"na... | unified-edge—To view this statement in the configuration.
unified-edge-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 17.1. | [
"Configuring a Set of IP-Based TDF Subscriber Properties with a TDF Domain"
] |
subscription-id-type (PCRF Partition) | subscription-id-type number; | [edit access pcrf partition partition-name] | Identify the subscriber. You can identify the subscriber using several IANA predefined values, or define
your own. The Policy and Charging Rule Function (PCRF) uses the subscription-id-type during a
subscriber login session using for CCR-GX-I and CCA-GX-I messages.
BEST PRACTICE: For wireline service, we recommend that... | [
{
"name": "number",
"desc": "Identifier for the type of subscriber for a PCRF partition. Default: 4 (END_USER_PRIVATE) Range: 1 through 2147483647 Values: 1 (END_USER_IMSI)"
},
{
"name": "2 (END_USER_SIP_URI)",
"desc": ""
},
{
"name": "3 (END_USER_NAI)",
"desc": ""
},
{
"n... | admin—To view this statement in the configuration.
admin-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 16.2. | [
"3GPP Policy and Charging Control for Wireline Provisioning and Accounting",
"3GPP Policy and Charging Control for Wireline Provisioning and Accounting",
"3GPP Policy and Charging Control for Wireline Provisioning and Accounting",
"3GPP Policy and Charging Control for Wireline Provisioning and Accounting",
... |
success | success string; | [edit access firewall-authentication pass-through (ftp | http | telnet) banner],
[edit access firewall-authentication web-authentication banner] | Specify the banner (message) that users see when trying to connect using FTP, HTTP, or Telnet after
successful authentication. | [
{
"name": "string",
"desc": "Banner text. Maximum length of the message text is 250 characters. Enclose the banner text"
},
{
"name": "within spaces or special characters",
"desc": "for example, quotation marks (” “)."
}
] | access—To view this statement in the configuration.
access-control—To add this statement to the configuration. | Statement introduced in Release 8.5 of Junos OS. | [
"External Authentication Servers",
"Configure a Custom Logo and Banner Messages"
] |
sunrpc | sunrpc {
disable;
map-entry-timeout map-entry-timeout;
traceoptions {
flag {
all {
extensive
}
}
}
} | [edit logical-systems name security alg],
[edit logical-systems name tenants name security alg],
[edit security alg],
[edit services alg],
[edit tenants name security alg] | CAUTION: Enabling tracing can adversely impact scale and performance and may
increase security risk. We strongly recommend using the trace, tracing, or traceoptions
commands only under the guidance of a JTAC support engineer. After collecting the
debug information, immediately disable tracing to minimize risk and resto... | [
{
"name": "disable",
"desc": "Disable the Sun RPC ALG. By default, the Sun RPC ALG is enabled."
},
{
"name": "map-entry-timeout map-entry-timeout",
"desc": "Specify the Sun RPC ALG mapping entry timeout value in hours."
},
{
"name": "traceoptions",
"desc": "Configure the Sun RPC ALG ... | security—To view this statement in the configuration.
security-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 9.0.
The tenant option is introduced in Junos OS Release 18.3R1. | [
"Understanding Sun RPC ALGs"
] |
supplementary-blackout-timer (Host Fast Reroute) | supplementary-blackout-timer minutes; | [edit logical-systems logical-system-name routing-instances instance-name routing-options
interface interface-name],
[edit routing-instances instance-name routing-options interface interface-name] | Override the global supplementary blackout timer for the specified host fast-reroute (HFRR) profile.
When you configure HFRR, an optional ARP prefix limit sets a maximum for the number of ARP routes
and, therefore FRR routes created for each HFRR profile in the routing table. This limit prevents ARP
attacks from exhaus... | [
{
"name": "minutes",
"desc": "Number of minutes, in addition to the ARP cache timeout value, before an HFRR profile is reactivated after the ARP prefix limit is exceeded. Range: 1 through 15 minutes"
}
] | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 12.2. | [
"Example: Configuring Link Protection with Host Fast Reroute"
] |
supplicant | supplicant {
interface interface-name {
local-certificate certificate-id;
authentication-method eap-tls;
user-id user-id;
}
} | [edit protocols dot1x] | Configure the interface as a supplicant for 802.1X authentication. You can configure an interface to act
as both an authenticator and as a supplicant on a link connecting switches or routers. This can be a
switch-to-switch, switch-to-router, or router-to-router link. This enables the devices to authenticate
each other,... | [
{
"name": "local-certificate certificate-id",
"desc": "Specify the the local certificate for the supplicant interface when the local device has multiple loaded certificates."
},
{
"name": "authentication-method (eap-tls |",
"desc": ""
},
{
"name": "eap-md5)",
"desc": "Configure the a... | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 22.2R1. | [] |
suppress-host-routes-from-dci-to-dc | suppress-host-routes-from-dci-to-dc | [edit routing-instances routing-instance-name protocols evpn interconnect] | You can suppress Ethernet VPN (EVPN) Type 5 host route advertisements re-originated across the data
center interconnect (DCI), to the local data center (DC). Setting this statement achieves better scaling
and performance on leaf devices by preventing host route advertisements for non-existing subnets on
the local DC. H... | [] | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 24.2R1.
Statement introduced in Junos OS Evolved Release 24.2R1. | [] |
suppress-interface-leaf | suppress-interface-leaf; | [edit forwarding-options] | Configure a single source of data for the following operational state sensors:
•
/interfaces/interface/state/high-speed
•
/interfaces/interface/state/oper-status
You can use this statement to suppress telemetry streaming of these statistics from the packet
forwarding engine (PFE). This might be required for collectors ... | [] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Evolved Release 23.2R1. | [] |
suppression | suppression {
disable;
(include-destination-address | no-include-destination-address);
max-logs-operate value;
max-time-report value;
start-log value;
} | [edit security idp sensor-configuration log] | Log suppression reduces the number of logs by displaying a single record for multiple occurrences of the
same event. Log suppression can negatively impact sensor performance if the reporting interval is set
too high. By default this feature is enabled. | [
{
"name": "disable",
"desc": ""
},
{
"name": "include-destination-",
"desc": ""
},
{
"name": "address",
"desc": "When log suppression is enabled, multiple occurrences of events with the same source, service, and matching attack object generate a single log record with a count of occu... | security—To view this statement in the configuration.
security-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 9.2. | [] |
surf-control-integrated | surf-control-integrated {
cache {
size value;
timeout value;
}
profile profile-name {
category customurl-list name {
action (block | log-and-permit | permit);
}
custom-block-message value;
default (block | log-and-permit | permit);
... | [edit security utm default-configuration]
[edit security utm feature-profile web-filtering] | 15.1X49-D10
The surf-control- integrated feature is not supported from Junos OS Release 15.1X49-D10
onwards. | [] | security—To view this statement in the configuration.
security-control—To add this statement to the configuration. | The surf-control- integrated feature is not supported from Junos OS Release 15.1X49-D10 onwards. For
previous releases, statement introduced in Junos OS Release 9.5.
The [edit security utm default-configuration] hierarchy level is introduced in Junos OS Release 18.2R1.
Change History Table
Feature support is determined... | [] |
suspend-for | suspend-for; | [edit security macsec connectivity-association connectivity-association-name mka] | Configure the suspend-for statement to maintain non-stop MACsec service during graceful routing engine
switchover (GRES).
The MACsec Key Agreement (MKA) protocol maintains the MACsec session between two nodes on a
point-to-point MACsec link. The MKA protocol works at the control plane level between the two nodes.
When ... | [] | admin—To view this statement in the configuration.
admin-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 21.2R1. | [
"Configuring Media Access Control Security (MACsec) on Routers"
] |
suspend-on-request | suspend-on-request; | [edit security macsec connectivity-association connectivity-association-name mka] | Configure the suspend-on-request statement to maintain non-stop MACsec service during graceful routing
engine switchover (GRES).
The MACsec Key Agreement (MKA) protocol maintains the MACsec session between two nodes on a
point-to-point MACsec link. The MKA protocol works at the control plane level between the two nodes... | [] | admin—To view this statement in the configuration.
admin-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 21.2R1. | [
"Configuring Media Access Control Security (MACsec) on Routers"
] |
sustained-rate | sustained-rate rate; | [edit class-of-service traffic-control-profiles traffic-control-profile-name]
[edit firewall atm-policeratm-policer-name] | (MX Series routers) Define ATM sustained cell rate on ATM MICs in cells per second by entering a
decimal number followed by the abbreviation c; where 1 cps = 384 bps. | [
{
"name": "rate",
"desc": "ATM sustained rate in cells per second."
}
] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 12.1. | [
"show class-of-service traffic-control-profile"
] |
swap (Dynamic VLANs) | swap; | [edit dynamic-profiles profile-name interfaces interface-name unit logical-unit-number input-vlan-
map],
[edit dynamic-profiles profile-name interfaces interface-name unit logical-unit-number output-vlan-
map] | For dynamic VLAN interfaces, specify the VLAN rewrite operation to replace a VLAN tag. The outer
VLAN tag of the frame is overwritten with the user-specified VLAN tag information. | [] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 10.4. | [
"Rewriting the VLAN Tag on Tagged Frames",
"Stacking and Rewriting VLAN Tags for the Layer 2 Wholesale Solution"
] |
swap (protocols mpls) | swap out-label; | [edit logical-systems logical-system-name protocols mpls static-label-switched-path lsp-name
transit incoming-label],
[edit protocols mpls static-label-switched-path lsp-name transit incoming-label] | Remove the label at the top of the label stack and replace it with the specified label. Manually assigned
incoming labels can have values from 1,000,000 through 1,048,575. This statement is used to configure
static LSPs at transit routers. | [
{
"name": "out-label",
"desc": "Manually assigned outgoing label value."
}
] | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 7.4. | [
"Configuring the Intermediate (Transit) and Egress Routers for Static LSPs"
] |
swap | swap; | [edit interfaces interface-name unit logical-unit-number input-vlan-map],
[edit interfaces interface-name unit logical-unit-number output-vlan-map],
[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number
input-vlan-map],
[edit logical-systems logical-system-name interfaces interfa... | Specify the VLAN rewrite operation to replace a VLAN tag. The outer VLAN tag of the frame is
overwritten with the user-specified VLAN tag information.
On MX Series routers, you can enter this statement on Gigabit Ethernet IQ and 10-Gigabit Ethernet IQ2
and IQ2-E interfaces, 10-Gigabit Ethernet LAN/WAN PIC, aggregated E... | [] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 7.4. | [
"Rewriting the VLAN Tag on Tagged Frames",
"Configuring Q-in-Q Tunneling on EX Series Switches with ELS Support"
] |
swap-by-poppush | swap-by-poppush; | [edit interfaces interface-name unit logical-unit-number] | For Gigabit Ethernet IQ and 10-Gigabit Ethernet IQ2 and IQ2-E interfaces, 10-Gigabit Ethernet
LAN/WAN PIC, and aggregated Ethernet using Gigabit Ethernet IQ interfaces, specify the VLAN rewrite
operation to replace a VLAN tag. Pop original tag, then push an entirely new tag. The swap operation is
performed as pop follo... | [] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 11.2 | [] |
swap-push | swap-push; | [edit interfaces interface-name unit logical-unit-number input-vlan-map],
[edit interfaces interface-name unit logical-unit-number output-vlan-map],
[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number
input-vlan-map],
[edit logical-systems logical-system-name interfaces interfa... | Specify the VLAN rewrite operation to replace the outer VLAN tag of the frame with a user-specified
VLAN tag value. A user-specified outer VLAN tag is pushed in front. The outer tag becomes an inner tag
in the final frame.
You can use this statement on Gigabit Ethernet IQ, IQ2 and IQ2-E interfaces, 10-Gigabit Ethernet
... | [] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 8.1. | [
"Rewriting a VLAN Tag and Adding a New Tag"
] |
swap-swap | swap-swap; | [edit interfaces interface-name unit logical-unit-number input-vlan-map],
[edit interfaces interface-name unit logical-unit-number output-vlan-map],
[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number
input-vlan-map],
[edit logical-systems logical-system-name interfaces interfa... | Specify the VLAN rewrite operation to replace both the inner and the outer VLAN tags of the frame
with a user-specified VLAN tag value.
You can use this statement on Gigabit Ethernet IQ, IQ2 and IQ2-E interfaces, 10-Gigabit Ethernet
LAN/WAN PIC, for aggregated Ethernet interfaces using Gigabit Ethernet IQ2 and IQ2-E or... | [] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 8.1. | [
"Rewriting the Inner and Outer VLAN Tags"
] |
switch (IPLC) | switch interface-name | remote; | [edit chassis fpc fpc-slot optical-options wavelength nm] | Switch the specified wavelength from the IPLC port to the specified local or remote optical interface.
The IPLC is designed to connect the ADD and DROP ports on the front panel to compatible optical PICs or
MICs on the local or remote chassis. Wavelengths configured on the local IPLC ADD ports are multiplexed
and sent ... | [
{
"name": "fpc-slot",
"desc": "Specify the IPLC slot number."
},
{
"name": "interface-name",
"desc": "Specify the name of the optical interface to which you want to switch the specified wavelength. This field is free-form text."
},
{
"name": "nm",
"desc": "Specify the wavelength numb... | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Releases 15.1F6 17.1R1. | [
"Configuring the Integrated Photonic Line Card to Switch Wavelengths to Local or Remote Optical",
"Interfaces",
"Understanding How to Configure the Integrated Photonic Line Card",
"Understanding the Integrated Photonic Line Card Architecture",
"Configuring a Two-Degree Node for Express Traffic"
] |
switch (Protocols OpenFlow) | switch switch-name {
controller {
address address;
id id;
protocol tcp {
port port;
}
role equal;
}
default-action (drop | packet-in);
interfaces {
interface-name port-id port;
}
purge-flow-timer seconds;
} | [edit protocols openflow] | Configure an OpenFlow virtual switch. | [
{
"name": "switch-name",
"desc": "User-configured identifier for the OpenFlow virtual switch. The identifier can include a maximum of 60 characters."
}
] | admin—To view this statement in the configuration.
admin-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 13.3. | [
"Understanding Support for OpenFlow on Devices Running Junos OS"
] |
switch-away-lsps | switch-away-lsps; | [edit logical-systems logical-systems-name protocols mpls interface interface-name],
[edit protocols mpls interface interface-name] | (MX Series routers only) Enable you to switch an LSP away from a network node using a bypass LSP.
This feature could be used in maintenance of active networks when a network device needs to be
replaced without interrupting traffic passing through the network. The LSPs can be either static or
dynamic. Configure this sta... | [] | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 10.2. | [
"Switching LSPs Away from a Network Node"
] |
switch-options (Interfaces) | switch-options {
switch-port port-number {
(auto-negotiation | no-auto-negotiation);
speed (10m | 100m | 1g);
link-mode (full-duplex | half-duplex);
}
} | [edit interfaces ge-pim/0/0] | Configuration of the physical port characteristics is done under the single physical interface. | [] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 8.4. | [] |
switch-options (VLANs) | switch-options {
interface interface-name {
encapsulation-type;
ignore-encapsulation-mismatch;
pseudowire-status-tlv;
static-mac mac-address {
vlan-id vlan-id;
}
}
mac-table-aging-time seconds;
mac-table-size {
number;
packet-action dr... | [edit vlans vlans-name] | Configure Layer 2 learning and forwarding properties for a VLAN or a virtual switch.
The remaining statements are explained separately. See CLI Explorer. | [] | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement modified in Junos OS Release 9.5.
Statement introduced in Junos OS Release 12.3R2.
Statement (mac-pinning) introduced in Junos OS 16.2 for MX Series routers.
mac-ip-table-size statement introduced in Junos OS 17.4 Release for MX Series routers and EX9200
switches. | [
"Ethernet Switching and Layer 2 Transparent Mode Overview"
] |
switch-options | switch-options {
interface interface-name {
mac-pinning;
mac-learning-priority value packet-action action;
interface-mac-limit limit;
}
interface-mac-limit limit {
packet-action drop;
}
mac-statistics;
mac-table-size limit {
packet-action drop;
}
n... | [edit],
[edit logical-systems logical-system-name],
[edit logical-systems logical-system-name routing-instances routing-instance-name],
[edit routing-instances routing-instance-name] | Configure Layer 2 learning and forwarding properties for a set of bridge domains. | [] | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 9.2.
Support for logical systems added in Junos OS Release 9.6.
14.1x53-D10 | [
"Understanding Layer 2 Learning and Forwarding for Bridge Domains Functioning as Switches with",
"Layer 2 Trunk Ports"
] |
switch-port | switch-port port-number {
(auto-negotiation | no-auto-negotiation);
speed (10m | 100m | 1g);
link-mode (full-duplex | half-duplex);
} | [edit interfaces ge-pim/0/0 switch-options] | Configuration of the physical port characteristics, done under the single physical interface.
Default
Autonegotiation is enabled by default. If the link speed and duplex are also configured, the interfaces
use the values configured as the desired values in the negotiation. | [
{
"name": "port-number",
"desc": "Ports are numbered 0 through 5 on the 6-port Gigabit Ethernet uPIM, 0 through 7 on the 8-port Gigabit Ethernet uPIM, and 0 through 15 on the 16-port Gigabit Ethernet uPIM."
}
] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 8.4. | [] |
switch-type | switch-type (att5e | etsi | ni1 | ntdms-100) | [edit interfaces br-pim/0/port isdn-options] | For J Series Services Routers only. Configure the ISDN variant supported. | [
{
"name": "att5e",
"desc": "AT&T switch variant."
},
{
"name": "etsi",
"desc": "European Telecommunications Standards Institute switch variant."
},
{
"name": "ni1",
"desc": "National ISDN 1 switch variant."
},
{
"name": "ntdms-100",
"desc": "Northern Telecom DMS-100."
}... | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 7.4. | [] |
switching-type | switching-type (fiber | lambda | psc-1 | tdm); | [edit logical-systems logical-system-name protocols mpls label-switched-path lsp-name lsp-
attributes],
[edit protocols mpls label-switched-path lsp-name lsp-attributes] | Specify the switching method for the LSP. The switching method can be one of the following values:
•
fiber—Fiber switching
•
lambda—Lambda switching
•
psc-1—Packet switching
•
tdm—Time-division multiplexing (TDM) switching
Default
psc-1 | [] | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 7.4. | [
"Configuring MPLS LSPs for GMPLS"
] |
switchover-delay | switchover-delay milliseconds; | [edit logical-systems logical-system-name protocols l2circuit neighbor address interface
interface-name],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols vpls
neighbor address],
[edit protocols l2circuit neighbor address interface interface-name],
[edit routing-instances ro... | After the primary pseudowire goes down, specifies the delay (in milliseconds) to wait before the backup
pseudowire takes over. You configure this statement for each backup neighbor configuration to adjust
the switchover time after a failure is detected. | [
{
"name": "milliseconds",
"desc": "Specify the time to wait before switching to the backup pseudowire after the primary"
}
] | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 9.2. | [
"Configuring the Switchover Delay for the Pseudowires"
] |
switchover-mode | switchover-mode (revertive | non-revertive); | [edit chassis synchronization] | Specify whether the device should switch to a higher-quality clock source or use the current clock
source only.
Default
The default is revertive mode. | [
{
"name": "revertive",
"desc": "In revertive mode (the default), the system automatically switches from a lower to a higher quality clock source whenever the higher clock source becomes available."
},
{
"name": "non-revertive",
"desc": "Set this option so that the router continues to use the cur... | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 11.2R4. | [
"quality-level"
] |
switchover-on-routing-crash | switchover-on-routing-crash; | [edit system] | Prevent loss of traffic in the case of NSR being configured. With the switchover-on-routing-crash
configuration statement enabled, when rpd on the primary Routing Engine crashes with NSR configured,
the Routing Engine will switch over immediately to the backup Routing Engine to preserve protocol
state and adjacencies. ... | [] | admin—To view this statement in the configuration.
admin-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 13.3. | [
"Configuring Nonstop Active Routing"
] |
sxl-retry | sxl-retry value; | [edit security utm default-configuration]
[edit security utm feature-profile anti-virus sophos-engine] | Configure the number of retry attempts to the remote Sophos Extensible List (SXL) server when a
request timeout occurs.
Starting in Junos OS Release 23.1R1, we've deprecated the sxl-retry statement at the [edit security utm
default-configuration anti-virus sophos-engine] and [security utm feature-profile anti-virus sop... | [
{
"name": "value",
"desc": "Number of retries."
}
] | security—To view this statement in the configuration.
security-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 11.1.
The [edit security utm default-configuration] hierarchy level is introduced in Junos OS Release 18.2R1. | [] |
sxl-timeout | sxl-timeout seconds; | [edit security utm default-configuration]
[edit security utm feature-profile anti-virus sophos-engine] | Configure the timeout value for responses to a Sophos checksum or URI query.
Starting in Junos OS Release 23.1R1, we've deprecated the sxl-timeout statement at the [edit security utm
default-configuration anti-virus sophos-engine] and [security utm feature-profile anti-virus sophos-engine]
hierarchy levels. | [
{
"name": "seconds",
"desc": "Number of seconds before timeout occurs."
}
] | security—To view this statement in the configuration.
security-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 11.1.
The [edit security utm default-configuration] hierarchy level is introduced in Junos OS Release 18.2R1. | [] |
symbol-period | symbol-period count; | [edit protocols oam ethernet link-fault-management action-profile name event link-event-rate],
[edit protocols oam ethernet link-fault-management interface name event-thresholds] | Configure the threshold for sending symbol period events or taking the action specified in the action
profile.
A symbol error is any symbol code error on the underlying physical layer. The symbol period threshold is
reached when the number of symbol errors reaches the configured value within the period window. The
defa... | [
{
"name": "count",
"desc": "Threshold count in seconds for symbol period events."
}
] | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 9.4. | [
"Configure Ethernet OAM Link Fault Management"
] |
symmetric-hash | symmetric-hash {
complement;
} | [edit chassis fpc slot-number pic slot-number hash-key family inet],
[edit chassis fpc slot-number pic slot-number hash-key family multiservice] | (MX Series 5G Universal Routing Platforms only) Configure the symmetric hash or symmetric hash
complement at the PIC level for configuring symmetrical load balancing on an 802.3ad Link Aggregation
Group. | [
{
"name": "complement",
"desc": "Include the complement of the symmetric hash in the hash key."
}
] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 9.6. | [
"Configuring PIC-Level Symmetrical Hashing for Load Balancing on 802.3ad LAGs for MX Series",
"Routers"
] |
syn-ack-ack-proxy (IDS Screen Next Gen Services) | syn-ack-ack-proxy {
threshold number;
} | [edit services screen ids-option screen-name tcp] | Configure the maximum number of connections from an IP address that can be opened without being
completed. Once this threshold has been reached, further connection requests are rejected. In the SYN-
ACK-ACK attack, the session table can fill up, resulting in the device rejecting legitimate connection
requests. | [
{
"name": "threshold number",
"desc": "Maximum number of uncompleted connections from any single IP address. Range: 1 through 250,000 Default: 512"
}
] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 19.3R2. | [
"Configuring Network Attack Protection With IDS Screens for Next Gen Services"
] |
syn-ack-ack-proxy | syn-ack-ack-proxy; {
threshold number,
} | [edit security screen ids-option screen-name tcp] | Prevent the SYN-ACK-ACK attack, which occurs when the attacker establishes multiple telnet sessions
without allowing each session to terminate. This behavior consumes all open slots, generating a denial-
of-service (DoS) condition. | [
{
"name": "threshold number",
"desc": "Number of connections from any single IP address."
}
] | security—To view this statement in the configuration.
security-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 8.5; support. | [
"Attack Detection and Prevention Overview",
"Example: Configuring Multiple Screening Options"
] |
syn-check-required | syn-check-required; | [edit security policies from-zone zone-name to-zone zone-name
policy policy-name then permit tcp-options] | Enable sync check per policy. The syn-check-required value overrides the global value no-syn-check. | [] | security—To view this statement in the configuration.
security-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 10.4. | [
"Attack Detection and Prevention Overview",
"Example: Configuring Multiple Screening Options"
] |
syn-cookie (IDS MS-DPC) | syn-cookie {
mss value;
threshold rate;
} | [edit services ids rule rule-name term term-name then] | Enable SYN-cookie defenses against SYN attacks when using the MS-DPC. By default, SYN-cookie
techniques are not applied.
When SYN cookie is enabled on Junos OS and becomes the TCP-negotiating proxy for the destination
server, it replies to each incoming SYN segment with a SYN/ACK containing an encrypted cookie as its
... | [] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 7.4. | [
"Configuring Actions in IDS Rules"
] |
syn-fin (IDS Screen Next Gen Services) | syn-fin; | [edit services screen ids-option screen-name tcp] | Identify and drop packets that have both the SYN and FIN flags set, which can cause unpredictable
behavior. | [] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 19.3R2. | [
"Configuring Network Attack Protection With IDS Screens for Next Gen Services"
] |
syn-fin | syn-fin; | [edit security screen ids-option screen-name tcp] | Enable detection of an illegal combination of flags that attackers can use to consume sessions on the
target device, thus resulting in a denial-of-service (DoS) condition. | [] | security—To view this statement in the configuration.
security-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 8.5. | [
"Attack Detection and Prevention Overview",
"Example: Configuring Multiple Screening Options"
] |
syn-flood | syn-flood {
alarm-threshold number;
attack-threshold number;
destination-threshold number;
source-threshold number;
timeout seconds;
white-list name {
destination-address destination-address;
source-address source-address;
}
} | [edit security screen ids-option screen-name tcp] | Configure detection and prevention of SYN flood attacks. Such attacks occur when the connecting host
continuously sends TCP SYN requests without replying to the corresponding ACK responses.
NOTE: On all SRX Series Firewalls, the TCP synchronization flood alarm threshold value
does not indicate the number of packets dro... | [] | security—To view this statement in the configuration.
security-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 8.5. | [] |
syn-flood-protection-mode | syn-flood-protection-mode (syn-cookie | syn-proxy); | [edit security flow] | Enable SYN cookie or SYN proxy defenses against SYN attacks. SYN flood protection mode is enabled
globally on the device and is activated when the configured syn-flood attack-threshold value is exceeded. | [
{
"name": "syn-cookie",
"desc": "Uses a cryptographic hash to generate a unique Initial Sequence Number (ISN). This is"
},
{
"name": "syn-proxy",
"desc": "Uses a proxy to handle the SYN attack."
}
] | security—To view this in the configuration.
security-control—To add this to the configuration. | Statement introduced in Junos OS Release 8.5; support. | [] |
syn-frag (IDS Screen Next Gen Services) | syn-frag; | [edit services screen ids-option screen-name tcp] | Identify and drop SYN packet fragments. In TCP SYN fragment attacks, the target caches SYN
fragments, waiting for the remaining fragments to arrive so it can reassemble them and complete the
connection. A flood of SYN fragments eventually fills the host’s memory buffer, preventing valid traffic
connections. | [] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 19.3R2. | [
"Configuring Network Attack Protection With IDS Screens for Next Gen Services"
] |
syn-frag | syn-frag; | [edit security screen ids-option screen-name tcp] | Enable detection of a SYN fragment attack and drops any packet fragments used for the attack. A SYN
fragment attack floods the target host with SYN packet fragments. The host caches these fragments,
waiting for the remaining fragments to arrive so it can reassemble them. The flood of connections that
cannot be complete... | [] | security—To view this statement in the configuration.
security-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 8.5. | [] |
sync-active-path-bandwidth | sync-active-path-bandwidth; | [edit logical-systems logical-system-name protocols mpls],
[edit logical-systems logical-system-name protocols mplslabel-switched-path lsp-name],
[edit logical-systems logical-system-name protocols mpls label-switched-path lsp-name auto-
bandwidth],
[edit logical-systems logical-system-name protocols mpls label-switche... | When you have a primary and a secondary path configuration, specify that a path needs to be signaled
with the active-path bandwidth when the auto-bandwidth adjustment happens and that the secondary
path synchronizes the bandwidth reservations to that of the primary path.
When a primary path fails, bandwidth reservation... | [] | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 13.2. | [
"Disabling Constrained-Path LSP Computation",
"Configuring Explicit-Path LSPs"
] |
sync-reset | sync-reset (disable | enable); | [edit interfaces name aggregated-ether-options lacp],
[edit dynamic-profiles name interfaces name aggregated-ether-options lacp],
[edit dynamic-profiles name logical-systems name interfaces name aggregated-ether-options lacp] | For redundant Ethernet interface link aggregation group links, you can configure the minimum number
of physical child links on the primary node in the redundant Ethernet interface that must be working. If
the minimum number of operating child links falls below the configured value, the interface is marked
down even if ... | [
{
"name": "disable",
"desc": "Disable synchronization reset."
},
{
"name": "enable",
"desc": "Enable synchronization reset."
}
] | interface | Statement introduced in Junos OS Release 16.1R1. | [] |
synchronization (ACX Series) | synchronization {
clock-mode(auto-select | free-run);
enable-extended-ql-tlv;
esmc-transmit {
interfaces (all | interface-name) {
squelch {
method(ais | ql-dnu | rai | shut);
quality-level (eEEC | ePRC | ePRTC | prc | prs | PRTC | sec | smc | ssu-a | ssu-b |
st2 | st3 | st... | [edit chassis] | Configure Synchronous Ethernet parameters.
NOTE: Refer to Synchronous Ethernet to view the various SyncE features supported by
the ACX platform. | [] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 12.2. | [
"External Clock Synchronization Overview for ACX Series Routers",
"Configuring External Clock Synchronization for ACX Series Routers",
"Synchronous Ethernet Overview"
] |
synchronization (M Series and T Series) | synchronization {
primary (external-a | external-b | fpc-slot-number | gps-0-10mhz | gps-0-5mhz | gps-1-10mhz
| gps-1-5mhz | bits-a | bits-b);
secondary (external-a | external-b | fpc-slot-number | gps-0-10mhz | gps-0-5mhz |
gps-1-10mhz | gps-1-5mhz | bits-a | bits-b );
signal-type (t1 | e1);
switchin... | [edit chassis] | (M320, M40e, M120, T320, T640, and T1600 routers and PTX Series Packet Transport Routers only)
Configure an external synchronization interface to synchronize the internal Stratum 3 clock to an
external source, and then synchronize the chassis interface clock to that source. | [
{
"name": "primary",
"desc": "First external timing source specified in the configuration hierarchy. This statement has the"
},
{
"name": "following suboptions:",
"desc": ""
},
{
"name": "external-a",
"desc": "Use external-a as the timeTransmitter clock synchronization source."
},
... | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 7.6. | [
"Configuring Junos OS to Support an External Clock Synchronization Interface for M Series, MX",
"Series, and T Series Routers"
] |
synchronization (MX Series) | synchronization {
clock-mode (auto-select | free-run);
esmc-transmit {
interfaces (all | interface-name);
}
hold-interval {
configuration-change seconds;
restart seconds;
switchover seconds;
}
interfaces {
external | (external-0/0 | external-1/0) {
... | [edit chassis] | (MX5-T, MX10-T, MX40-T, MX80-T, MX240, MX480, MX960 , and MX10003 routers) Configure
Synchronous Ethernet parameters. For configuration details, see Configuring Clock Synchronization
Interface on MX Series Routers.
(MX240, MX480, MX960, and MX2020 routers with SCBE or SCBE2) Configure centralized clocking
parameters.
•... | [
{
"name": "clock-mode (auto-select | free-run)",
"desc": "Specify the mode of operation to select the clock source either from a"
},
{
"name": "hold-interval (configuration-change | restart | switchover) seconds",
"desc": "Specify the chassis synchronization hold"
},
{
"name": "interval ... | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 10.4.
Statement introduced in Junos OS Release 17.3R1 for MX10003 router.
Options interfaces, output, and source interfaces external introduced in Junos OS Release 12.3. | [
"Synchronous Ethernet Overview",
"Configuring Clock Synchronization Interface on MX Series Routers",
"Example: Configuring Framing Mode for Synchronous Ethernet on MX Series Routers with 10-Gigabit",
"Ethernet MIC",
"Example: Configuring Centralized Clocking on the Enhanced MX Switch Control Board",
"Exam... |
synchronization (PTX Series) | synchronization {
clock-mode (auto-select | free-run);
esmc-transmit {
interfaces (all | interface-name);
}
global-wait-to-restore minutes;
hold-interval {
configuration-change seconds;
restart seconds;
switchover seconds;
}
interfaces (bits-a | bits-b | gps-0... | [edit chassis] | Configure Synchronous Ethernet parameters. | [] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 12.1X48. | [
"Synchronous Ethernet Overview",
"Synchronizing Internal Stratum 3 Clock to External Clock Sources on PTX Series Routers",
"Clock Sources for PTX Series Packet Transport Routers",
"Understanding Clock Synchronization"
] |
synchronize (Scripts) | synchronize; | [edit system scripts] | Synchronize all commit, event, lib, op, and SNMP scripts from the requesting Routing Engine to the
responding Routing Engine when executing a commit synchronize operation. The device synchronizes all
scripts regardless of whether they are enabled in the configuration or have been updated since the last
synchronization.... | [] | maintenance—To view or add this statement in the configuration. | Statement introduced in Junos OS Release 13.2. | [
"Synchronize Scripts Between Routing Engines"
] |
synchronize | synchronize; | [edit system commit] | For devices with multiple Routing Engines only. Configure the commit command to automatically perform
a commit synchronize action between dual Routing Engines within the same chassis. The Routing Engine on
which you execute the commit command (the requesting Routing Engine) copies and loads its candidate
configuration ... | [
{
"name": "and-quit",
"desc": "(Optional) Quit configuration mode if the commit synchronization succeeds."
},
{
"name": "at",
"desc": "(Optional) Time at which to activate configuration changes."
},
{
"name": "comment",
"desc": "(Optional) Write a message to the commit log."
},
{... | system—To view this statement in the configuration.
system-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 7.4. | [
"Synchronizing the Routing Engine Configuration",
"Configuring Multiple Routing Engines to Synchronize Committed Configurations Automatically"
] |
synchronous-ethernet-mapping | synchronous-ethernet-mapping {
clock-source ip-address {
interface interface1-name;
interface interface2-name;
}
} | [edit protocols ptp slave hybrid] | Configure the Synchronous Ethernet mapping for hybrid mode.
The remaining statements are explained separately. See CLI Explorer. | [] | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 12.2R2. | [
"Configuring Hybrid Mode and ESMC Quality Level Mapping",
"Example: Configuring Hybrid Mode and ESMC Quality Level Mapping",
"Understanding Hybrid Mode",
"Precision Time Protocol Overview",
"Synchronous Ethernet Overview"
] |
syntonized-e2e-transparent | syntonized-e2e-transparent; | [edit protocols ptp] | Configure the syntonized-end-to-end (E2E) transparent clock for Precision Time Protocol (PTP). In
syntonized transparent clock, the transparent clock requires physical layer frequency based on the ITU-T
G.8262/.1 standard. To set syntonized transparent clock, you can enable Synchronous Ethernet
configuration with Ether... | [] | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 21.1R1 EVO. | [
"Understanding Transparent Clocks in Precision Time Protocol"
] |
syslog (Chassis) | syslog {
facility {
severity;
destination destination;
}
} | [edit chassis fpc slot-number pic pic-number adaptive-services service-package extension-
provider] | Enable PIC system logging to record or view system log messages on a specific PIC. The system log
information is passed to the kernel for logging in the /var/log directory. | [
{
"name": "facility",
"desc": "Group of messages that are either generated by the same software process or concern a similar"
},
{
"name": "severity",
"desc": "Classification of effect on functioning. Possible values are the following options:"
},
{
"name": "any",
"desc": "Include al... | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 9.2.
Options daemon and kernel (for facility) introduced in Junos OS Release 9.5. | [] |
syslog (IDS MS-DPC) | syslog; | [edit services ids rule rule-name term term-name then logging] | Enable system logging when using the MS-DPC. The system log information from the MS-DPC is passed
to the kernel for logging in the /var/log directory. | [] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 7.4. | [
"Configuring Actions in IDS Rules"
] |
syslog (Interfaces) | syslog {
host hostname {
facility-override facility-name;
log-prefix prefix-number;
services priority-level;
port
}
message-rate-limit messages-per-second;
} | [edit interfaces interface-name services-options] | For adaptive services interfaces, configure generation of system log messages for the service set. System
log information is passed to the kernel for logging in the /var/log directory. Any values configured in the
service set definition override these values. | [] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 7.4. | [
"Junos OS Services Interfaces Library for Routing Devices"
] |
syslog (Next Gen Services) | syslog {
escape;
event-rate event-rate;
facility-override facility-override;
format format;
local-category {};
local-log-tag;
mode mode;
profile name {
category category;
stream-name name;
template traditional-firewall;
root-streaming;
source-... | [edit services service-set name] | Set UDP based syslogs for Next Gen Services (Unified Services). | [
{
"name": "escape",
"desc": "Enable escape defined by RFC5424 for the sd and binary format logs"
},
{
"name": "event-rate",
"desc": "Control plane event rate. Range from 0 through 1500 logs per second"
},
{
"name": "facility-override",
"desc": "Alternate facility for logging to remot... | system | Statement introduced in Junos OS Release 19.3R2. | [
"Understanding Next Gen Services CGNAT Global System Logging",
"Enabling Global System Logging for Next Gen Services",
"Configuring System Logging to One or More Remote Servers for Next Gen Services",
"Configuring Local System Logging for Next Gen Services"
] |
syslog (OAM Action) | syslog; | [edit protocols oam ethernet link-fault-management action-profile action] | Generate a syslog message for the Ethernet Operation, Administration, and Management (OAM) event.
Generate a system log message for the Ethernet Operation, Administration, and Maintenance (OAM)
link fault management (LFM) event. | [] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 8.5. | [
"Specifying the Actions to Be Taken for Link-Fault Management Events",
"Configuring Ethernet OAM Link Fault Management"
] |
syslog (QFabric System) | syslog {
file filename {
archive {
size maximum-file-size;
}
explicit-priority;
facility severity;
match "regular-expression";
structured-data;
}
filter all {
facility severity;
match "regular-expression";
}
host hostname {
... | [edit system] | Configure system log messages for the QFabric system.
The remaining statements are explained separately. | [] | system—To view this statement in the configuration.
system-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 11.3. | [
"Understanding the Implementation of System Log Messages on the QFabric System",
"Directing System Log Messages to a Remote Machine"
] |
syslog (Services CoS) | syslog; | [edit services cos rule rule-name term term-name then],
[edit services cos rule rule-name term term-name then reverse] | Enable system logging. The system log information from the Multiservices and Services PICs is passed to
the kernel for logging in the /var/log directory. This setting overrides any syslog statement setting
included in the service set or interface default configuration. | [] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 8.1. | [
"Configuring CoS Rules on Services PICs",
"Configuring Actions in CoS Rules"
] |
syslog (Services IPsec VPN) | syslog; | [edit services ipsec-vpn rule rule-name term term-name then] | Enable system logging. The system log information for the Adaptive Services or Multiservices Physical
Interface Card (PIC) is passed to the kernel for logging in the /var/log directory. | [] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 7.4. | [
"Configuring IPsec Rules"
] |
syslog (Services L2TP) | syslog {
host hostname {
services severity-level;
facility-override facility-name;
log-prefix prefix-value;
}
} | [edit services l2tp tunnel-group group-name] | Configure the generation of system log messages for L2TP services. System log information is passed to
the kernel for logging in the /var/log/l2tpd directory.
NOTE: This statement is not supported for L2TP LNS on MX Series routers. | [] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 7.4. | [
"Configuring System Logging of L2TP Tunnel Activity"
] |
syslog (Services NAT) | syslog; | [edit services nat rule rule-name term term-name then] | Enable system logging. The system log information from the Multiservices PIC is passed to the kernel for
logging in the /var/log directory. | [] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 7.4. | [
"Network Address Translation Rules Overview"
] |
syslog (Services Service Set) | syslog {
stream stream-name
host hostname {
class {
alg-logs;
deterministic-nat-configuration-log;
ids-logs;
nat-logs;
packet-logs;
pcp-logs;
session-logs <open | close>;
stateful-firewall-logs;
... | [edit services service-set service-set-name] | Configure generation of system log messages for the service set. The system log information is passed
to the kernel for logging in the /var/log directory. These settings override the values defined at the [edit
interfaces interface-name services-options] hierarchy level; for more information on configuring those
values... | [
{
"name": "stream stream-name",
"desc": "Assigns a stream name to a data stream. Stream is assigned to a host:"
},
{
"name": "host hostname",
"desc": "Assigns name to a host system."
},
{
"name": "log-tag",
"desc": "Tag included in logs to this host.The remaining statements are descr... | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 7.4. | [] |
syslog (Services Stateful Firewall) | syslog; | [edit services stateful-firewall rule rule-name term term-name then] | Enable system logging. The system log information from the Adaptive Services or Multiservices PIC is
passed to the kernel for logging in the /var/log directory. This setting overrides any syslog statement
setting included in the service set or interface default configuration. | [] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 7.4. | [
"Configuring Actions in Stateful Firewall Rules"
] |
syslog (System) | syslog {
allow-duplicates;
alternate-format;
archive {
(binary-data| no-binary-data);
files number;
size maximum-file-size;
(world-readable | no-world-readable);
}
console {
facility severity;
application-status (any | error);
}
file filename ... | [edit system] | Configure the system log messages types to send to different destinations such as files, remote
destinations, user terminals, or the system console.
The remaining statements are explained separately. | [
{
"name": "archive",
"desc": "Define parameters for archiving log messages."
},
{
"name": "allow-duplicates",
"desc": "Allow the repeated log messages for all targets."
},
{
"name": "alternate-format",
"desc": "Configure to append node name with daemon name."
},
{
"name": "co... | system—To view this statement in the configuration.
system-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 7.4.
Option alternate-format introduced in Junos OS Evolved Release 20.4R2.
Option shell introduced in Junos OS Evolved Release 23.1R1.
application-status option introduced in Junos OS Evolved Release 23.1R1. | [
"Overview of System Logging",
"System Log Explorer"
] |
syslog | (syslog | no-syslog); | [edit interfaces mo-fpc/pic/port multiservice-options] | System logging is enabled by default. The system log information of the Monitoring Services PIC is
passed to the kernel for logging in the/var/log directory.
•
syslog—Enable PIC system logging.
•
no-syslog—Disable PIC system logging. | [] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 7.4. | [
"Configuring Flow Monitoring"
] |
syslog-local-system-timestamp | syslog-local-system-timestamp; | For routers with MS-MPC, you can configure the statement at the following hierarchy level:
[edit interfaces ms-interface\ams-interface services-options | Display the system timestamp in the syslog by overriding by overriding the default UTC timestamp to
local system timestamp format.
Default
When the statement is not enabled, the syslog displays the system timestamp in UTC format. | [] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 21.1. | [] |
syslog-subtag | syslog-subtag syslog-subtag; | [edit snmp rmon alarm index] | Add a tag to the system log message. | [
{
"name": "syslog-subtag syslog-subtag",
"desc": "Tag of not more than 80 uppercase characters to be added to syslog"
}
] | snmp—To view this statement in the configuration.
snmp-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 8.5. | [
"Remote Nework Monitoring (RMON)",
"RMON MIB Event, Alarm, Log, and History Control Tables"
] |
system (Analytics Resource) | system {
polling-interval {
queue-monitoring interval;
traffic-monitoring interval;
}
resource-profile profile-name;
} | [edit services analytics resource] | Apply a network analytics resource profile to a system for which you wish to enable queue or traffic
monitoring. The resource profile is a template that specifies the parameters for queue and traffic
monitoring, as well as for the depth and latency thresholds.
NOTE: The system statement in the [edit services analytics ... | [
{
"name": "polling-interval",
"desc": "Configure the polling interval for queue and traffic monitoring:"
},
{
"name": "queue-monitoring",
"desc": ""
},
{
"name": "polling-interval",
"desc": "Configure the queue monitoring interval in milliseconds. Range: 1 to 1000 milliseconds (1 mi... | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 13.2. | [
"Network Analytics Overview"
] |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.