command stringlengths 2 75 | syntax stringlengths 0 289k | hierarchy_level stringlengths 0 6.91k | description stringlengths 0 45.2k | options listlengths 0 499 | required_privilege_level stringlengths 0 330k | release_information stringlengths 0 3.14k | related_documentation listlengths 0 22 |
|---|---|---|---|---|---|---|---|
topologies (Protocols IS-IS) | topologies {
ipv4-multicast;
ipv6-multicast;
ipv6-unicast;
} | [edit logical-systems logical-system-name protocols isis],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
isis],
[edit protocols isis],
[edit routing-instances routing-instance-name protocols isis] | Configure alternate IS-IS multicast or unicast topologies.
The remaining statements are explained separately. See CLI Explorer.
NOTE: The IS-IS interface metrics for the IPv4 topology can be configured
independently of the IPv6 metrics. You can also selectively disable interfaces from
participating in the IPv6 topology... | [
{
"name": "ipv4-multicast",
"desc": "Configure alternate IPv4 multicast topologies."
},
{
"name": "ipv6-multicast",
"desc": "Configure alternate IPv6 multicast topologies."
},
{
"name": "ipv6-unicast",
"desc": "Configure alternate IPv6 unicast topologies. This statement causes IS-IS ... | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 7.4. | [
"Example: Configuring IS-IS IPv4 and IPv6 Unicast Topologies",
"Example: Configuring IS-IS Multicast Topology",
"IS-IS Multicast Topologies Overview",
"Understanding IS-IS IPv4 and IPv6 Unicast Topologies"
] |
topology (Filter-Based Forwarding) | topology topology-name; | [edit firewall family (inet | inet6) filter filter-name term term-name then],
[edit firewall family (inet | inet6) filter filter-name term term-name then logical-system
logical-system-name],
[edit firewall family (inet | inet6) filter filter-name term term-name then logical-system
logical-system-name routing-instance... | Configure a topology for filter-based forwarding for multitopology routing. The firewall filter you apply
to the ingress interface is used to look up traffic against the configured topology, and, if a route matches
the conditions you configure for the term, the route is accepted and added to the routing table for the
... | [
{
"name": "topology-name",
"desc": "Name of a topology against which you want to match traffic."
}
] | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 9.0. | [
"Example: Configuring Multitopology Routing for Class-Based Forwarding of Voice, Video, and Data",
"Traffic",
"Routing Policies, Firewall Filters, and Traffic Policers User Guide",
"Understanding Multitopology Routing for Class-Based Forwarding of Voice, Video, and Data Traffic"
] |
topology (Multitopology Routing) | topology topology-name; | [edit logical-systems logical-system-name routing-instances routing-instance-name routing-
options topologies family (inet | inet6)],
[edit logical-systems logical-system-name routing-options topologies family (inet | inet6)],
[edit routing-instances routing-instance-name routing-options topologies family (inet | inet6... | Configure the name of a topology configured to run multitopology routing. | [
{
"name": "topology-name",
"desc": "Name of the topology. Include a string value that describes the type of traffic, such as"
}
] | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 9.0. | [
"Example: Configuring Multitopology Routing for Class-Based Forwarding of Voice, Video, and Data",
"Traffic",
"Example: Configuring Multitopology Routing to Provide Redundancy for Multicast Traffic over",
"Separate Network Paths",
"Understanding Multitopology Routing in Conjunction with PIM",
"Understandi... |
topology (OSPF Interface) | topology (ipv4-multicast | name) {
metric metric;
} | [edit logical-systems logical-system-name protocols ospf area area-id interface interface-name],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols ospf
area area-id interface interface-name],
[edit protocols ospf area area-id interface interface-name],
[edit routing-instances... | Configure interface-specific properties for multitopology OSPF, including topology-specific metric
values for an interface.
All OSPF interfaces have a cost, which is a routing metric that is used in the link-state calculation.
Routes with lower total path metrics are preferred over those with higher path metrics. The d... | [
{
"name": "ipv4-multicast",
"desc": "Name of the topology for IPv4 multicast traffic."
},
{
"name": "name",
"desc": "Name of a topology created under the [edit routing-options] hierarchy level."
},
{
"name": "metric metric",
"desc": "Cost of a route from an OSPF interface. You can sp... | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 9.0. | [
"Example: Configuring Multitopology Routing for Class-Based Forwarding of Voice, Video, and Data",
"Traffic",
"Example: Configuring Multitopology Routing to Provide Redundancy for Multicast Traffic over",
"Separate Network Paths",
"Understanding Multitopology Routing for Class-Based Forwarding of Voice, Vid... |
topology (OSPF) | topology (default | ipv4-multicast | name) {
spf-options {
delay milliseconds;
holddown milliseconds;
rapid-runs number;
}
topology-id number;
} | [edit logical-systems logical-system-name protocols ospf],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
ospf],
[edit protocols ospf],
[edit routing-instances routing-instance-name protocols ospf] | Enable a topology for OSPF multitopology routing. You must first configure one or more topologies
under the [edit routing-options] hierarchy level. | [
{
"name": "default",
"desc": "Name of the default topology. This topology is automatically created, and all routes that"
},
{
"name": "ipv4-multicast",
"desc": "Name of the topology for IPv4 multicast traffic."
},
{
"name": "name",
"desc": "Name of a topology you configured at the [e... | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 9.0. | [
"Example: Configuring Multitopology Routing to Provide Redundancy for Multicast Traffic over",
"Separate Network Paths",
"Example: Configuring Multitopology Routing for Class-Based Forwarding of Voice, Video, and Data",
"Traffic",
"Understanding Multitopology Routing for Class-Based Forwarding of Voice, Vid... |
topology (Protocols BGP) | topology name {
community {
target identifier;
}
} | [edit logical-systems logical-system-name protocols bgp family (inet | inet6) unicast],
[edit logical-systems logical-system-name protocols bgp group group-name family (inet | inet6)
unicast],
[edit logical-systems logical-system-name protocols bgp group group-name neighbor address family
(inet | inet6) unicast],
[ed... | Enable a topology for BGP multitopology routing. You must first configure one or more topologies under
the [edit routing-options] hierarchy level.
Apply the community tags to identify the application topologies by configuring a routing topology name
and BGP community value.
In Junos OS, multitopology support for BGP is... | [
{
"name": "name",
"desc": "Name of a topology you configured at the [edit routing-options] hierarchy level to create a topology for a specific type of traffic, such as voice or video."
},
{
"name": "community",
"desc": "Configure the community to identify the multitopology routes. BGP uses the t... | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 9.0. | [
"Example: Configuring Multitopology Routing to Provide Redundancy for Multicast Traffic over",
"Separate Network Paths",
"Example: Configuring Multitopology Routing for Class-Based Forwarding of Voice, Video, and Data",
"Traffic",
"Understanding Multitopology Routing for Class-Based Forwarding of Voice, Vid... |
topology-id | topology-id number; | [edit logical-systems logical-system-name protocols ospf topology name],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols ospf
topology name],
[edit protocols ospf topology name],
[edit routing-instances routing-instance-name protocols ospf topology name] | Configure a topology identifier for a topology enabled for OSPF.
Default
The default identifier for the default topology is 0, and the default identifier for the topology for IPv4
multicast traffic is 1. These identifiers are predefined and cannot be modified. | [
{
"name": "number",
"desc": "The integer value used to identify the topology."
}
] | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 9.0. | [
"Example: Configuring Multitopology Routing to Provide Redundancy for Multicast Traffic over",
"Separate Network Paths",
"Example: Configuring Multitopology Routing for Class-Based Forwarding of Voice, Video, and Data",
"Traffic",
"Understanding Multitopology Routing for Class-Based Forwarding of Voice, Vid... |
tos-reflect (L2TP) | tos-reflect; | [edit services l2tp tunnel-group name] | Configure the LNS to reflect the IP ToS value in the inner IP header to the outer IP header. When CoS
rewrite rules are also configured ([edit class-of-service interfaces interface-name unit logical-unit-number
rewrite-rules]), the rewrite is performed only on the inner IP ToS; the outer IP TOS value is not affected. | [] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 11.4. | [
"Configuring Dynamic CoS for an L2TP LNS Inline Service"
] |
total-memory | total-memory <percentage>;
per-logical-domain <number> | [edit security idp sensor-configuration packet-log] | Configure the maximum amount of memory to be allocated to packet capture for the device. This value
is expressed as a percentage of the memory available on the device. The total memory for a device will
differ depending on its operating mode. | [
{
"name": "percentage",
"desc": "Amount of packet capture memory expressed as a percentage of total memory for the"
}
] | security—To view this statement in the configuration.
security-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 10.2. | [] |
trace (DHCP Local Server) | trace; | [edit logical-systems logical-system-name routing-instances routing-instance-name system
services dhcp-local-server dhcpv6 group group-name interface interface-name],
[edit logical-systems logical-system-name routing-instances routing-instance-name system
services dhcp-local-server group group-name interface interfa... | CAUTION: Enabling tracing can adversely impact scale and performance and may
increase security risk. We strongly recommend using the trace, tracing, or traceoptions
commands only under the guidance of a JTAC support engineer. After collecting the
debug information, immediately disable tracing to minimize risk and resto... | [] | system—To view this statement in the configuration.
system-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 10.4. | [
"Tracing Extended DHCP Operations",
"Tracing Extended DHCP Operations for Specific Interfaces"
] |
trace (DHCP Relay Agent) | trace; | [edit forwarding-options dhcp-relay dhcpv6 group group-name interface interface-name],
[edit forwarding-options dhcp-relay group group-name interface-name],
[edit logical-systems logical-system-name forwarding-options dhcp-relay dhcpv6 group group-name
interface interface-name],
[edit logical-systems logical-system... | CAUTION: Enabling tracing can adversely impact scale and performance and may
increase security risk. We strongly recommend using the trace, tracing, or traceoptions
commands only under the guidance of a JTAC support engineer. After collecting the
debug information, immediately disable tracing to minimize risk and resto... | [] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 10.4.
Support at the [edit ... dhcpv6] hierarchy levels introduced in Junos OS Release 11.4. | [
"Configuring DHCP Relay Agent",
"DHCP Monitoring and Management"
] |
trace (EVPN-VXLAN) | trace {
evpn-vxlan;
} | [edit services] | CAUTION: Enabling tracing can adversely impact scale and performance and may
increase security risk. We strongly recommend using the trace, tracing, or traceoptions
commands only under the guidance of a JTAC support engineer. After collecting the
debug information, immediately disable tracing to minimize risk and resto... | [
{
"name": "evpn-vxlan",
"desc": "Enable evpn-vxlan tracing"
}
] | system—To view this statement in the configuration.
system-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 23.4R1 and Junos OS Evolved Release 23.4R1. | [
"Remove a Persistent or Transient Configuration Change Using Commit Scripts"
] |
trace (System) | trace application {
application-name {
node {
node-name {
level level;
group group-name {
enabled (off | on);
tracepoint tracepoint-name {
enabled (off | on);
}
}
... | [edit system] | CAUTION: Enabling tracing can adversely impact scale and performance and may
increase security risk. We strongly recommend using the trace, tracing, or traceoptions
commands only under the guidance of a JTAC support engineer. After collecting the
debug information, immediately disable tracing to minimize risk and resto... | [
{
"name": "application-name",
"desc": "Name of the application for which tracing should be applied. You can see a list of the applications for Junos OS Evolved by issuing the show system applications command. If you want to enable tracing for all applications, use the value all."
},
{
"name": "enabl... | admin | Statement introduced in Junos OS Evolved 18.2R1. | [] |
traceoptions (802.1X) | traceoptions {
file filename <files number> <size size> <world-readable | no-world-readable> <match regex>;
flag flag;
} | [edit protocols dot1x] | Define tracing operations for the 802.1X protocol.
Default
Tracing operations are disabled. | [
{
"name": "file filename",
"desc": "Name of the file to receive the output of the tracing operation. Enclose the name within"
},
{
"name": "files number",
"desc": "(Optional) Maximum number of trace files. When a trace file named trace-file reaches its"
},
{
"name": "flag flag",
"des... | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 9.0.
Support for the dot1x-event and dot1x-ipc options introduced in Junos OS Release 13.2X50 for EX Series
switches. | [
"Configuring 802.1X Interface Settings (CLI Procedure)",
"802.1X for Switches Overview"
] |
traceoptions (Access Port Security) | traceoptions {
file (file-name | files files | match match | no-world-readable | size size | world-
readable);
flag ( all | asynch | chassis-scheduler | cos-adjustment | dynamic | hardware-database |
init | parse | performance-monitor | process | restart | route-socket | show | snmp | util);
no-remote-trac... | [edit ethernet-switching-options],
[edit class-of-service] | CAUTION: Enabling tracing can adversely impact scale and performance and may
increase security risk. We strongly recommend using the trace, tracing, or traceoptions
commands only under the guidance of a JTAC support engineer. After collecting the
debug information, immediately disable tracing to minimize risk and resto... | [
{
"name": "disable",
"desc": "(Optional) Disable the tracing operation. You can use this option to disable a single operation"
},
{
"name": "file filename",
"desc": "Name of the file to receive the output of the tracing operation. Enclose the name within"
},
{
"name": "files number",
... | system—To view this statement in the configuration.
system-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 9.2. | [
"Port Security Features",
"Interfaces Overview for Switches",
"Understanding IP Source Guard for Port Security on Switches",
"Understanding Redundant Trunk Links (Legacy RTG Configuration)",
"Understanding STP",
"Understanding Bridging and VLANs on Switches"
] |
traceoptions (Access) | traceoptions {
file {
filename;
files number;
match regular-expression;
size maximum-file-size;
(world-readable | no-world-readable);
}
flag flag;
no-remote-trace;
} | [edit access firewall-authentication] | CAUTION: Enabling tracing can adversely impact scale and performance and may
increase security risk. We strongly recommend using the trace, tracing, or traceoptions
commands only under the guidance of a JTAC support engineer. After collecting the
debug information, immediately disable tracing to minimize risk and resto... | [
{
"name": "file filename",
"desc": "Name of the file to receive the output of the tracing operation. Enclose the name"
},
{
"name": "files number",
"desc": "(Optional) Maximum number of trace files. When a trace file named trace-file reaches its"
},
{
"name": "match regular-expression",
... | trace—To view this statement in the configuration.
trace-control—To add this statement to the configuration. | Statement introduced in Release 8.5 of Junos OS. | [
"SRX Firewall Users"
] |
traceoptions (Active Directory Access) | traceoptions {
file filename ;
flag {
active-directory-authentication;
all;
configuration;
db;
ip-user-mapping;
ip-user-probe;
ipc;
user-group-mapping;
wmic;
}
level {
all
error
info
notice
ve... | [edit services user-identification active-directory-access] | CAUTION: Enabling tracing can adversely impact scale and performance and may
increase security risk. We strongly recommend using the trace, tracing, or traceoptions
commands only under the guidance of a JTAC support engineer. After collecting the
debug information, immediately disable tracing to minimize risk and resto... | [
{
"name": "file",
"desc": ""
},
{
"name": "filename",
"desc": "Name of the file to receive the output of the tracing operation. Enclose the name within quotation marks. All files are placed in the directory /var/log."
},
{
"name": "flag",
"desc": "Trace the operation or operations to... | security—To view this statement in the configuration.
security-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 12.1X47-D10. | [
"Overview of Integrated User Firewall"
] |
traceoptions (Address-Assignment Pool) | traceoptions {
file filename {
files number;
size maximum-file-size;
match regex;
(world-readable | no-world-readable);
}
flag address-assignment;
flag all;
flag configuration;
flag framework;
flag ldap;
flag local-authentication;
flag radius;
} | [edit system processes general-authentication-service] | CAUTION: Enabling tracing can adversely impact scale and performance and may
increase security risk. We strongly recommend using the trace, tracing, or traceoptions
commands only under the guidance of a JTAC support engineer. After collecting the
debug information, immediately disable tracing to minimize risk and resto... | [
{
"name": "file filename",
"desc": "Name of the file that receives the output of the tracing operation. Enclose the name in"
},
{
"name": "files number",
"desc": "(Optional) Maximum number of trace files. When a trace file named trace-file reaches its"
},
{
"name": "flag flag",
"desc... | admin—To view this statement in the configuration.
admin-control—To add this statement to the configuration. | Flag for tracing address-assignment pool operations introduced in Junos OS Release 9.0.
option-name option introduced in Junos OS Release 8.3.
Statement introduced in Junos OS Release 9.0. | [
"Address-Assignment Pool Configuration Overview"
] |
traceoptions (advanced policy-based routing) | traceoptions {
file {
filename;
files number;
match regular-expression;
size maximum-file-size;
(world-readable | no-world-readable);
}
flag flag;
no-remote-trace;
} | [edit security advance-policy-based-routing] | CAUTION: Enabling tracing can adversely impact scale and performance and may
increase security risk. We strongly recommend using the trace, tracing, or traceoptions
commands only under the guidance of a JTAC support engineer. After collecting the
debug information, immediately disable tracing to minimize risk and resto... | [
{
"name": "file",
"desc": "Configure the trace file options."
},
{
"name": "filename",
"desc": "Name of the file to receive the output of the tracing operation. Enclose the name within"
},
{
"name": "files number",
"desc": "Maximum number of trace files. When a trace file named trace... | services—To view this statement in the configuration.
services-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 15.1X49-D60. | [
"Example: Configuring Advanced Policy-Based Routing for Application-Aware Traffic Management",
"Solution",
"Understanding Advanced Policy-Based Routing"
] |
traceoptions (Analytics Agent) | traceoptions {
file filename;
flag (debug | error | info | trace);
} | [edit services analytics agent] | CAUTION: Enabling tracing can adversely impact scale and performance and may
increase security risk. We strongly recommend using the trace, tracing, or traceoptions
commands only under the guidance of a JTAC support engineer. After collecting the
debug information, immediately disable tracing to minimize risk and resto... | [
{
"name": "file filename",
"desc": "Name of the file to receive the output of the tracing operation. The file is stored in the /var/log/ directory of your device. Default: ntf-agent"
},
{
"name": "flag (debug |",
"desc": ""
},
{
"name": "error | info |",
"desc": ""
},
{
"nam... | system | Statement introduced in Junos OS Release 18.3R1. | [
"IPFIX Mediation on the BNG",
"Configuring NTF Agent"
] |
traceoptions (Analytics) | traceoptions {
file filename;
files number-of-files;
size size;
} | [edit services analytics] | CAUTION: Enabling tracing can adversely impact scale and performance and may
increase security risk. We strongly recommend using the trace, tracing, or traceoptions
commands only under the guidance of a JTAC support engineer. After collecting the
debug information, immediately disable tracing to minimize risk and resto... | [
{
"name": "file filename",
"desc": "Specify a filename for storing the traceoptions data. The file is stored in the /var/log/ directory of your device. If you do not specify a filename, the data is not stored in a file."
},
{
"name": "files number-of-files",
"desc": "Specify the number of files ... | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 13.2. | [
"Network Analytics Overview"
] |
traceoptions (ANCP) | traceoptions {
file filename <files number> <match regular-expression > <size maximum-file-size> <world-
readable | no-world-readable>;
flag flag <disable>;
level (all | error | info | notice | verbose | warning);
no-remote-trace;
} | [edit protocols ancp] | CAUTION: Enabling tracing can adversely impact scale and performance and may
increase security risk. We strongly recommend using the trace, tracing, or traceoptions
commands only under the guidance of a JTAC support engineer. After collecting the
debug information, immediately disable tracing to minimize risk and resto... | [
{
"name": "file filename",
"desc": "Name of the file to receive the output of the tracing operation. Enclose the name within"
},
{
"name": "files number",
"desc": "(Optional) Maximum number of trace files to create before overwriting the oldest one. If"
},
{
"name": "flag flag",
"des... | trace—To view this statement in the configuration.
trace-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 9.4. | [
"Tracing ANCP Events for Troubleshooting"
] |
traceoptions (App Engine Virtual Machine Management Service) | traceoptions {
file filename <files number> | match | no-world-readable |<size size> <world-readable >;
flag (all |ccif | configuration | heartbeat | init | miscellaneous | platform | pxe |
routing-instances | snmp);
level (all | error| info | notice | verbose | warning)
} | [edit system processes app-engine-virtual-machine-management-service] | CAUTION: Enabling tracing can adversely impact scale and performance and may
increase security risk. We strongly recommend using the trace, tracing, or traceoptions
commands only under the guidance of a JTAC support engineer. After collecting the
debug information, immediately disable tracing to minimize risk and resto... | [
{
"name": "file",
"desc": "Trace file information."
},
{
"name": "flag",
"desc": "Perform defined tracing operation."
},
{
"name": "level",
"desc": "Set traceoptions level."
},
{
"name": "no-remote-trace",
"desc": "Disable remote tracing."
}
] | system-control | Statement introduced in Junos OS Release 15.1F3.
NOTE: PTX3000 router supports the Routing and Control Board, RCBPTX. | [
"processes"
] |
traceoptions (Application Identification) | traceoptions {
file filename <files number> <match regex> <size size> <world-readable | no-world-readable>;
flag flag;
no-remote-trace;
} | [edit services application-identification] | CAUTION: Enabling tracing can adversely impact scale and performance and may
increase security risk. We strongly recommend using the trace, tracing, or traceoptions
commands only under the guidance of a JTAC support engineer. After collecting the
debug information, immediately disable tracing to minimize risk and resto... | [
{
"name": "file filename",
"desc": "Use the specified file to receive the output of the tracing operation. Enclose the name"
},
{
"name": "files number",
"desc": "(Optional) Use the specified maximum number of trace files. When a trace file named trace-file reaches its maximum size, it is rename... | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 9.5. | [
"Tracing APPID Operations"
] |
traceoptions (Batch Commits) | traceoptions {
file filename;
files number;
flag (all | batch | commit-server | configuration);
size maximum-file-size;
(world-readable | no-world-readable);
} | [edit system commit server],
[edit system commit synchronize server] | CAUTION: Enabling tracing can adversely impact scale and performance and may
increase security risk. We strongly recommend using the trace, tracing, or traceoptions
commands only under the guidance of a JTAC support engineer. After collecting the
debug information, immediately disable tracing to minimize risk and resto... | [
{
"name": "file name",
"desc": "Name of the file to receive the output of the tracing operation. NOTE: If you configure traceoptions and do not explicitly specify a filename for logging the events, the batch commit events are logged in the commitd file (var/log/commitd) by default."
},
{
"name": "fi... | system—To view this statement in the configuration.
system-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 12.1. | [
"Example: Configuring Batch Commit Server Properties"
] |
traceoptions (Captive Portal Content Delivery) | traceoptions {
file filename <files number> <match regular-expression> <size size> <world-readable | no-
world-readable>;
flag flag;
no-remote-trace;
} | [edit services captive-portal-content-delivery] | CAUTION: Enabling tracing can adversely impact scale and performance and may
increase security risk. We strongly recommend using the trace, tracing, or traceoptions
commands only under the guidance of a JTAC support engineer. After collecting the
debug information, immediately disable tracing to minimize risk and resto... | [
{
"name": "file filename",
"desc": "Name of the file to receive the output of the tracing operation. Enclose the name within"
},
{
"name": "size size",
"desc": "(Optional) Maximum size of each trace file, in kilobytes (KB), megabytes (MB), or gigabytes"
},
{
"name": "files number",
"... | trace—To view this statement in the configuration.
trace-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 10.4.
Support for Next Gen Services introduced in Junos OS Release 19.3R2. | [
"HTTP Redirect Service Overview",
"Configuring MS-MPC-Based or MX-SPC3-Based Static HTTP Redirect Services",
"Configuring MS-MPC-Based or MX-SPC3-Based Converged HTTP Redirect Services",
"Configuring Routing Engine-Based, Static HTTP Redirect Services",
"Configuring Routing Engine-Based, Converged HTTP Redi... |
traceoptions (CASB) | traceoptions {
file (file-name | files files | match match | no-world-readable | size size | world-
readable);
flag ( all | flow | memory | pfeman);
level;
no-remote-trace;
} | [edit security casb] | CAUTION: Enabling tracing can adversely impact scale and performance and may
increase security risk. We strongly recommend using the trace, tracing, or traceoptions
commands only under the guidance of a JTAC support engineer. After collecting the
debug information, immediately disable tracing to minimize risk and resto... | [
{
"name": "file",
"desc": "Configure the trace file options."
},
{
"name": "filename",
"desc": "Name of the file to receive the output of the tracing operation. Enclose the"
},
{
"name": "files number",
"desc": "Maximum number of trace files. When a trace file named trace-file reache... | security—To view this statement in the configuration.
security-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 24.2R1. | [] |
traceoptions (Chassis Cluster) | traceoptions {
file {
filename;
files number;
match regular-expression;
(world-readable | no-world-readable);
size maximum-file-size;
}
flag flag;
level {
(alert | all | critical | debug | emergency | error | info | notice | warning);
}
no-remote-t... | [edit chassis cluster] | CAUTION: Enabling tracing can adversely impact scale and performance and may
increase security risk. We strongly recommend using the trace, tracing, or traceoptions
commands only under the guidance of a JTAC support engineer. After collecting the
debug information, immediately disable tracing to minimize risk and resto... | [
{
"name": "file filename",
"desc": "Name of the file to receive the output of the tracing operation. Enclose the name"
},
{
"name": "files number",
"desc": "(Optional) Maximum number of trace files. When a trace file named trace-file reaches"
},
{
"name": "match regular-expression",
... | trace—To view this statement in the configuration.
trace-control—To add this statement to the configuration. | Statement modified in Junos OS Release 9.5. | [] |
traceoptions (Class of Service) | traceoptions {
file filename <size size> <files number>
<world-readable | no-world-readable>;
flag flag <flag-modifier>;
no-remote-trace
} | [edit class-of-service] | CAUTION: Enabling tracing can adversely impact scale and performance and may
increase security risk. We strongly recommend using the trace, tracing, or traceoptions
commands only under the guidance of a JTAC support engineer. After collecting the
debug information, immediately disable tracing to minimize risk and resto... | [
{
"name": "file",
"desc": ""
},
{
"name": "filename",
"desc": "Name of the file to receive the tracing operation output. Enclose the name in quotation marks. Traceoption output files are located in the /var/log/ directory."
},
{
"name": "files",
"desc": ""
},
{
"name": "numbe... | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 11.1. | [] |
traceoptions (Commit, Op, and SNMP Scripts) | traceoptions {
file <filename> <files number> <size size> <world-readable | no-world-readable>;
flag flag;
no-remote-trace;
} | [edit system scripts commit],
[edit system scripts op],
[edit system scripts snmp] | CAUTION: Enabling tracing can adversely impact scale and performance and may
increase security risk. We strongly recommend using the trace, tracing, or traceoptions
commands only under the guidance of a JTAC support engineer. After collecting the
debug information, immediately disable tracing to minimize risk and rest... | [
{
"name": "file",
"desc": ""
},
{
"name": "filename",
"desc": "Name of the file to receive the output of the tracing operation. All files are placed in the directory /var/log. By default, commit script process tracing output is placed in the file cscript.log, op script process tracing is placed ... | maintenance—To view or add this statement in the configuration. | Statement introduced in Junos OS Release 7.4. | [
"Tracing Commit Script Processing",
"Tracing Op Script Processing",
"Tracing SNMP Script Processing",
"Dampening Script Execution"
] |
traceoptions (DDoS) | traceoptions {
file filename <files number> <match regular-expression > <size maximum-file-size> <world-
readable | no-world-readable>;
flag flag;
level (all | error | info | notice | verbose | warning);
no-remote-trace;
} | [edit system ddos-protection] | CAUTION: Enabling tracing can adversely impact scale and performance and may
increase security risk. We strongly recommend using the trace, tracing, or traceoptions
commands only under the guidance of a JTAC support engineer. After collecting the
debug information, immediately disable tracing to minimize risk and resto... | [
{
"name": "file filename",
"desc": "Name of the file to receive the output of the tracing operation. Enclose the filename"
},
{
"name": "files number",
"desc": "(Optional) Maximum number of trace files to create before overwriting the oldest one. If"
},
{
"name": "flag flag",
"desc":... | trace—To view this statement in the configuration.
trace-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 11.2.
Support for Enhanced Subscriber Management added in Junos OS Release 17.3R1. | [
"Tracing Control Plane DDoS Protection Operations"
] |
traceoptions (DHCP Server) | traceoptions {
file filename <files number> <match regex> <size size> <world-readable | no-world-readable>;
flag flag;
} | [edit system services dhcp] | CAUTION: Enabling tracing can adversely impact scale and performance and may
increase security risk. We strongly recommend using the trace, tracing, or traceoptions
commands only under the guidance of a JTAC support engineer. After collecting the
debug information, immediately disable tracing to minimize risk and resto... | [
{
"name": "file filename",
"desc": "Name of the file that receives the output of the tracing operation. Enclose the name in"
},
{
"name": "files number",
"desc": "(Optional) Maximum number of trace files. When a trace file named trace-file reaches its"
},
{
"name": "flag flag",
"desc... | system—To view this statement in the configuration.
system-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 9.0. | [] |
traceoptions (DHCP) | traceoptions {
file filename <files number> <match regular-expression > <size maximum-file-size> <world-
readable | no-world-readable>;
flag flag;
level (all | error | info | notice | verbose | warning);
no-remote-trace;
} | [edit system processes dhcp-service]
[edit security dynamic-address] | CAUTION: Enabling tracing can adversely impact scale and performance and may
increase security risk. We strongly recommend using the trace, tracing, or traceoptions
commands only under the guidance of a JTAC support engineer. After collecting the
debug information, immediately disable tracing to minimize risk and rest... | [
{
"name": "file filename",
"desc": "Name of the file to receive the output of the tracing operation. Enclose the name within"
},
{
"name": "files number",
"desc": "(Optional) Maximum number of trace files to create before overwriting the oldest one. If"
},
{
"name": "flag flag",
"des... | trace—To view this statement in the configuration.
trace-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 11.4. | [
"DHCP Monitoring and Management",
"traceoptions (Diameter Base Protocol for Subscriber Aware Policy"
] |
Control) | traceoptions {
file filename <files number> <match regular-expression > <size maximum-file-size> <world-
readable | no-world-readable>;
flag flag;
level (all | error | info | notice | verbose | warning);
no-remote-trace;
<peer peer-name>;
} | [edit access diameter] | CAUTION: Enabling tracing can adversely impact scale and performance and may
increase security risk. We strongly recommend using the trace, tracing, or traceoptions
commands only under the guidance of a JTAC support engineer. After collecting the
debug information, immediately disable tracing to minimize risk and resto... | [
{
"name": "file filename",
"desc": "Use the specified file to receive the output of the tracing operation. Enclose the filename within quotation marks. All files are placed in the directory /var/log."
},
{
"name": "files number",
"desc": "(Optional) Create the specified maximum number of trace f... | trace—To view this statement in the configuration.
trace-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 17.1. | [] |
traceoptions (Diameter Base Protocol) | traceoptions {
file filename <files number> <match regular-expression > <size maximum-file-size> <world-
readable | no-world-readable>;
flag flag;
level (all | error | info | notice | verbose | warning);
no-remote-trace;
} | [edit system processes diameter-service] | CAUTION: Enabling tracing can adversely impact scale and performance and may
increase security risk. We strongly recommend using the trace, tracing, or traceoptions
commands only under the guidance of a JTAC support engineer. After collecting the
debug information, immediately disable tracing to minimize risk and resto... | [
{
"name": "file filename",
"desc": "Name of the file to receive the output of the tracing operation. Enclose the filename"
},
{
"name": "files number",
"desc": "(Optional) Maximum number of trace files to create before overwriting the oldest one. If"
},
{
"name": "flag flag",
"desc":... | trace—To view this statement in the configuration.
trace-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 9.6. | [
"Tracing Diameter Base Protocol Processes for Subscriber Access"
] |
traceoptions (DNS, Port, and TFTP Packet Forwarding) | traceoptions {
file filename <files number> <match regular-expression> <size bytes> <world-readable | no-
world-readable>;
flag flag;
level level;
<no-remote-trace>;
} | [edit forwarding-options helpers] | CAUTION: Enabling tracing can adversely impact scale and performance and may
increase security risk. We strongly recommend using the trace, tracing, or traceoptions
commands only under the guidance of a JTAC support engineer. After collecting the
debug information, immediately disable tracing to minimize risk and resto... | [
{
"name": "file filename",
"desc": "Name of the file to receive the output of the tracing operation. Enclose the name in"
},
{
"name": "files number",
"desc": "(Optional) Maximum number of trace files. When a trace file named trace-file reaches its"
},
{
"name": "flag flag",
"desc": ... | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 7.4.
Statement standardized and match option introduced in Junos OS Release 8.0. | [
"Tracing BOOTP, DNS, and TFTP Forwarding Operations"
] |
traceoptions (Dynamic Flow Capture) | traceoptions {
file filename <files number> <size size> <world-readable | non-world-readable>;
} | [edit services dynamic-flow-capture] | CAUTION: Enabling tracing can adversely impact scale and performance and may
increase security risk. We strongly recommend using the trace, tracing, or traceoptions
commands only under the guidance of a JTAC support engineer. After collecting the
debug information, immediately disable tracing to minimize risk and resto... | [
{
"name": "file filename",
"desc": "Use the specified file to receive the output of the tracing operation. Enclose the name within quotation marks. All files are placed in the directory /var/log."
},
{
"name": "files number",
"desc": "(Optional) Use the specified maximum number of trace files. W... | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 9.2. | [
"Configuring Junos Capture Vision"
] |
traceoptions (dynamic-address) | traceoptions {
file< filename><files files><match match><size size><(world-readable | no-world-readable)>;
flag name;
level(all | error | info | notice | verbose | warning);
no-remote-trace;
} | [edit security dynamic-address] | CAUTION: Enabling tracing can adversely impact scale and performance and may
increase security risk. We strongly recommend using the trace, tracing, or traceoptions
commands only under the guidance of a JTAC support engineer. After collecting the
debug information, immediately disable tracing to minimize risk and resto... | [
{
"name": "level",
"desc": "Level of debugging output"
},
{
"name": "all",
"desc": "Match all levels"
},
{
"name": "error",
"desc": "Match error conditions"
},
{
"name": "info",
"desc": "Match informational messages"
},
{
"name": "notice",
"desc": "Match condi... | trace—To view this statement in the configuration.
trace-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 12.1X46-D25 on SRX Series Firewalls and on cSRX
Container Firewall in Junos OS Release 22.2R1. | [] |
traceoptions (dynamic-application) | traceoptions {
file {
filename;
files number;
match regular-expression;
size maximum-file-size;
(world-readable | no-world-readable);
}
flag flag;
no-remote-trace;
} | [edit security dynamic-application]
[edit security dynamic-address] | CAUTION: Enabling tracing can adversely impact scale and performance and may
increase security risk. We strongly recommend using the trace, tracing, or traceoptions
commands only under the guidance of a JTAC support engineer. After collecting the
debug information, immediately disable tracing to minimize risk and resto... | [
{
"name": "file",
"desc": "Trace file information Values:"
},
{
"name": "filename",
"desc": "Name of the file to receive the output of the tracing operation. Enclose the name within quotation marks. All files are placed in the directory /var/log. By default, the name of the file is the name of ... | trace—To view this statement in the configuration.
trace-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 18.2R1. | [
"Unified Security Policies"
] |
traceoptions (Egress Protection) | traceoptions {
file filename <files number> <size size> <world-readable | no-world-readable>;
flag flag;
} | [edit protocols mpls egress-protection] | CAUTION: Enabling tracing can adversely impact scale and performance and may
increase security risk. We strongly recommend using the trace, tracing, or traceoptions
commands only under the guidance of a JTAC support engineer. After collecting the
debug information, immediately disable tracing to minimize risk and resto... | [
{
"name": "filename",
"desc": "Name of the file to receive the output of the tracing operation."
},
{
"name": "files",
"desc": ""
},
{
"name": "number",
"desc": "(Optional) Maximum number of trace files. If you specify a maximum number of files, you must also include the size stateme... | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 11.4R3. | [
"Example: Configuring MPLS Egress Protection for Layer 3 VPN Services"
] |
traceoptions (Enhanced Subscriber Management) | traceoptions {
file filename <files number> <match regular-expression > <size maximum-file-size> <world-
readable | no-world-readable>;
flag flag <disable>;
level level;
no-remote-trace;
} | [edit system processes smg-service] | CAUTION: Enabling tracing can adversely impact scale and performance and may
increase security risk. We strongly recommend using the trace, tracing, or traceoptions
commands only under the guidance of a JTAC support engineer. After collecting the
debug information, immediately disable tracing to minimize risk and resto... | [
{
"name": "file filename",
"desc": "Name of the file to receive the output of the tracing operation. Enclose the name within"
},
{
"name": "files number",
"desc": "(Optional) Maximum number of trace files to create before overwriting the oldest one. If"
},
{
"name": "flag flag",
"des... | trace—To view this statement in the configuration.
trace-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 15.1R3. | [
"Configuring Junos OS Enhanced Subscriber Management",
"Configuring the Subscriber Management Database Trace Log Filename"
] |
traceoptions (Ethernet Switching) | [edit ethernet-switching-options]
[edit protocols protection-group]
[edit protocols edge-virtual-bridging] | Define global tracing operations for access security features on Ethernet switches.
Configure trace options for the protection group.
Define global tracing operations for edge virtual bridging (EVB) features on Ethernet switches.
Default
The Ethernet Switching Options traceoptions feature is disabled by default.
Edge V... | [
{
"name": "disable",
"desc": "(Optional) Disable the tracing operation. You can use this option to disable a single operation"
},
{
"name": "file filename",
"desc": "Name of the file to receive the output of the tracing operation. Enclose the name within"
},
{
"name": "files number",
... | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
system—To view this statement in the configuration.
system-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 11.1.
NOTE: The traceoptions statement is not supported on the QFX3000 QFabric system. | [
"Configuring Ethernet Ring Protection Switching on Switches (CLI Procedure)",
"Example: Configuring Ethernet Ring Protection Switching on EX Series Switches",
"Example: Configuring Ethernet Ring Protection Switching on QFX Series and EX Series Switches",
"Supporting ELS",
"Edge Virtual Bridging"
] | |
traceoptions (Event Options) | traceoptions {
file <filename> <files number> <match regular-expression> <size size> <world-readable | no-
world-readable>;
flag flag;
no-remote-trace;
} | [edit event-options] | CAUTION: Enabling tracing can adversely impact scale and performance and may
increase security risk. We strongly recommend using the trace, tracing, or traceoptions
commands only under the guidance of a JTAC support engineer. After collecting the
debug information, immediately disable tracing to minimize risk and resto... | [
{
"name": "file filename",
"desc": "Name of the file to receive the output of the tracing operation. All files are placed in the directory /var/log. By default, event policy process tracing output is placed in the file eventd. If you include the file statement, you must specify a filename. To retain the def... | maintenance—To view or add this statement in the configuration. | Statement introduced in Junos OS Release 7.5. | [
"Trace Event Policy Processing on Devices Running Junos OS"
] |
traceoptions (Event Scripts) | traceoptions {
file <filename> <files number> <size size> <world-readable | no-world-readable>;
flag flag;
no-remote-trace;
} | [edit event-options event-script] | CAUTION: Enabling tracing can adversely impact scale and performance and may
increase security risk. We strongly recommend using the trace, tracing, or traceoptions
commands only under the guidance of a JTAC support engineer. After collecting the
debug information, immediately disable tracing to minimize risk and resto... | [
{
"name": "file",
"desc": ""
},
{
"name": "filename",
"desc": "Name of the file to receive the output of the tracing operation. All files are placed in the directory /var/log. By default, event script process tracing output is placed in the file escript.log. If you include the file statement, yo... | maintenance—To view or add this statement in the configuration. | Statement introduced in Junos OS Release 7.6. | [
"Trace Event Script Processing on Devices Running Junos OS",
"Dampen Script Execution"
] |
traceoptions (Extensible Subscriber Services Manager) | traceoptions file file-name flag authentication | flag configuration | flag dictionary | flag
fsm | flag statistics | flag kernel | flag dynamic | flag database | flag op-script | flag
general | flag all | [edit system processes extensible-subscriber-services] | CAUTION: Enabling tracing can adversely impact scale and performance and may
increase security risk. We strongly recommend using the trace, tracing, or traceoptions
commands only under the guidance of a JTAC support engineer. After collecting the
debug information, immediately disable tracing to minimize risk and resto... | [
{
"name": "traceoptions",
"desc": "Configure the trace options for Extensible Subscriber Services Manager."
},
{
"name": "file-name",
"desc": "Name of the trace file."
},
{
"name": "flag all",
"desc": "Configure trace settings for all operations."
},
{
"name": "flag authentic... | system—To view this statement in the configuration.
system-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 15.1. | [] |
traceoptions (Extensions) | traceoptions {
file <filename> <files number> <match regex> <size size> <world-readable | no-world-
readable>;
flag flag;
no-remote-trace;
} | [edit system extensions extension-service application],
[edit system extensions extension-service application file script-name] | CAUTION: Enabling tracing can adversely impact scale and performance and may
increase security risk. We strongly recommend using the trace, tracing, or traceoptions
commands only under the guidance of a JTAC support engineer. After collecting the
debug information, immediately disable tracing to minimize risk and resto... | [
{
"name": "file",
"desc": "Indicate trace file information."
},
{
"name": "filename",
"desc": "Name of the file to receive the tracing operation output. Enclose the name in quotation marks. Traceoption output files are located in the /var/log/ directory."
},
{
"name": "files number",
... | trace—To view this statement in the configuration.
trace-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 16.1. | [] |
traceoptions (FC-2 Fibre Channel) | traceoptions {
file filename <replace> <size size> <files number> <no-stamp>;
<world-readable | no-world-readable>;
flag flag <flag-modifier>;
} | [edit fc-fabrics fabric-name fc2] | CAUTION: Enabling tracing can adversely impact scale and performance and may
increase security risk. We strongly recommend using the trace, tracing, or traceoptions
commands only under the guidance of a JTAC support engineer. After collecting the
debug information, immediately disable tracing to minimize risk and resto... | [
{
"name": "file name",
"desc": "Name of the file to receive the tracing operation output. Enclose the name in quotation"
},
{
"name": "files number",
"desc": "(Optional) Maximum number of trace files. When a trace file named trace-file reaches its"
},
{
"name": "flag",
"desc": "Traci... | storage—To view this statement in the configuration.
storage-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 11.1. | [] |
traceoptions (Fibre Channel) | traceoptions {
file filename <replace> <size size> <files number> <no-stamp>
<world-readable | no-world-readable>;
flag flag <flag-modifier>;
} | [edit fc-options] | CAUTION: Enabling tracing can adversely impact scale and performance and may
increase security risk. We strongly recommend using the trace, tracing, or traceoptions
commands only under the guidance of a JTAC support engineer. After collecting the
debug information, immediately disable tracing to minimize risk and resto... | [
{
"name": "file name",
"desc": "Name of the file to receive the tracing operation output. Enclose the name in quotation"
},
{
"name": "files number",
"desc": "(Optional) Maximum number of trace files. When a trace file named trace-file reaches its"
},
{
"name": "flag",
"desc": "Traci... | storage—To view this statement in the configuration.
storage-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 11.1. | [] |
traceoptions (FIP Protocol Fibre Channel) | traceoptions {
file filename <replace> <size size> <files number> <no-stamp>
<world-readable | no-world-readable>;
flag flag <flag-modifier>
} | [edit fc-fabrics fabric-name protocols fip] | CAUTION: Enabling tracing can adversely impact scale and performance and may
increase security risk. We strongly recommend using the trace, tracing, or traceoptions
commands only under the guidance of a JTAC support engineer. After collecting the
debug information, immediately disable tracing to minimize risk and resto... | [
{
"name": "file name",
"desc": "Name of the file to receive the tracing operation output. Enclose the name in quotation"
},
{
"name": "files number",
"desc": "(Optional) Maximum number of trace files. When a trace file named trace-file reaches its"
},
{
"name": "flag",
"desc": "Traci... | storage—To view this statement in the configuration.
storage-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 11.1. | [] |
traceoptions (flow) | traceoptions {
file< filename><files files><match match><size size><(world-readable | no-world-
readable)>;
flag name;
local-debug-buf {
size size;
}
no-remote-trace;
packet-filter name {
conn-tag conn-tag;
destination-port(afs | bgp | ... | [edit logical-systems name security flow] | CAUTION: Enabling tracing can adversely impact scale and performance and may
increase security risk. We strongly recommend using the trace, tracing, or traceoptions
commands only under the guidance of a JTAC support engineer. After collecting the
debug information, immediately disable tracing to minimize risk and resto... | [
{
"name": "no-remote-trace",
"desc": "Disable remote tracing"
},
{
"name": "rate-limit",
"desc": "Limit the incoming rate of trace messages Default: 0 Range: 0 through 4294967295"
},
{
"name": "root-override",
"desc": "Allow collect flow trace in root from all logical-systems and t... | security—To view this statement in the configuration.
security-control—To add this statement to the configuration. | Statement modified in Junos OS Release 24.2R1. | [] |
traceoptions (Forwarding Options) | traceoptions {
no-remote-trace;
file filename <files number> <size bytes> <match expression> <world-readable | no-world-
readable>;
} | [edit forwarding-options port-mirroring],
[edit forwarding-options sampling] | CAUTION: Enabling tracing can adversely impact scale and performance and may
increase security risk. We strongly recommend using the trace, tracing, or traceoptions
commands only under the guidance of a JTAC support engineer. After collecting the
debug information, immediately disable tracing to minimize risk and resto... | [] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 7.4. | [
"Tracing Traffic Sampling Operations"
] |
traceoptions (General Authentication Service) | traceoptions {
file filename <files number> <match regular-expression > <size maximum-file-size> <world-
readable | no-world-readable>;
filter {
user user@domain;
}
flag flag;
no-remote-trace;
} | [edit system processes general-authentication-service] | CAUTION: Enabling tracing can adversely impact scale and performance and may
increase security risk. We strongly recommend using the trace, tracing, or traceoptions
commands only under the guidance of a JTAC support engineer. After collecting the
debug information, immediately disable tracing to minimize risk and rest... | [
{
"name": "file filename",
"desc": "Name of the file to receive the output of the tracing operation. All files are placed in the"
},
{
"name": "files number",
"desc": "(Optional) Maximum number of trace files to create before overwriting the oldest one. If"
},
{
"name": "filter",
"de... | trace—To view this statement in the configuration.
trace-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 9.0. | [
"Tracing General Authentication Service Processes"
] |
traceoptions (Health Check Monitoring) | traceoptions {
file file-name ;
flag flag;
level (all | error | info | notice | verbose | warning);
monitor monitor-object-name {
group-name group-name;
real-services-name real-service-name;
}
no-remote-trace;
} | [edit services network-monitoring] | operational-commands
MS-MPC
Trace traffic load balancer show events.
parse
MS-MPC
Trace traffic load balancer parse events.
probe
MS-MPC and SPC3
Trace probe events.
probe-infra
MS-MPC and SPC3
Trace probe infra events.
route
MS-MPC
Trace traffic load balancer route events.
snmp
MS-MPC
Trace traffic load balancer SNMP ... | [
{
"name": "file file-name",
"desc": "Use the specified name of the file to receive the output of the tracing operation."
},
{
"name": "flag flag",
"desc": "Specify which operations you want to trace. To specify more than one operation, include multiple flag statements. Table 1907 on page 30703 s... | trace and interface—To view this statement in the configuration.
trace-control and interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 16.1. | [
"Configuring TLB"
] |
traceoptions (High Availability) | traceoptions {
file <filename> <files files> <match match> <size size> <(world-readable | no-world-
readable)>;
flag name;
level (alert | all | critical | debug | emergency | error | info | notice | warning);
no-remote-trace;
} | [edit chassis high-availability] | CAUTION: Enabling tracing can adversely impact scale and performance and may
increase security risk. We strongly recommend using the trace, tracing, or traceoptions
commands only under the guidance of a JTAC support engineer. After collecting the
debug information, immediately disable tracing to minimize risk and resto... | [
{
"name": "file filename",
"desc": "Name"
},
{
"name": "of the file to receive",
"desc": ""
},
{
"name": "the output of the",
"desc": "tracing operation. Enclose the name"
},
{
"name": "within quotation",
"desc": ""
},
{
"name": "marks",
"desc": ""
},
{
... | trace | Statement introduced in Junos OS Release 20.4R1. | [
"Multinode High Availability"
] |
traceoptions (IGMP Snooping) | traceoptions {
file filename <files number> <no-stamp> <replace> <size size> <world-readable | no-world-
readable>;
flag flag <flag-modifier>;
} | [edit protocols igmp-snooping] | Define tracing operations for IGMP snooping.
Default
The traceoptions feature is disabled by default. | [
{
"name": "file filename",
"desc": "Name of the file to receive the output of the tracing operation. Enclose the name within"
},
{
"name": "files number",
"desc": "(Optional) Maximum number of trace files, including the active trace file. When a trace file"
},
{
"name": "flag flag",
... | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 9.1. | [] |
traceoptions (Individual Interfaces) | traceoptions {
file <filename> <files number> <match regular-expression> <size size> <world-readable | no-
world-readable>;
flag flag <disable>;
no-remote-trace;
} | [edit interfaces interface-name] | CAUTION: Enabling tracing can adversely impact scale and performance and may
increase security risk. We strongly recommend using the trace, tracing, or traceoptions
commands only under the guidance of a JTAC support engineer. After collecting the
debug information, immediately disable tracing to minimize risk and resto... | [
{
"name": "with PTX Series,",
"desc": ""
},
{
"name": "ACX Series, EX",
"desc": "Series Individual interfaces"
},
{
"name": "with QFX Series,",
"desc": ""
},
{
"name": "QFabric System,",
"desc": ""
},
{
"name": "OCX1100, EX4600,",
"desc": ""
},
{
"name... | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 12.2 for ACX Series Universal Metro Routers. | [
"Tracing Operations of an Individual Router Interface",
"Tracing Operations of an Individual Router or Switch Interface",
"Example: Configuring Ethernet OAM Link Fault Management",
"Configuring Ethernet OAM Link Fault Management",
"Tracing Operations of the Interface Process"
] |
traceoptions (Inline Monitoring) | traceoptions {
file <filename> <files files> <match match> <size size> <(world-readable | no-world-
readable)>;
no-remote-trace;
} | [edit services inline-monitoring] | CAUTION: Enabling tracing can adversely impact scale and performance and may
increase security risk. We strongly recommend using the trace, tracing, or traceoptions
commands only under the guidance of a JTAC support engineer. After collecting the
debug information, immediately disable tracing to minimize risk and resto... | [
{
"name": "file file-name",
"desc": "Use the specified file to receive the output of the tracing operation. All files are placed in the directory /var/log."
},
{
"name": "files files",
"desc": "(Optional) Use the specified maximum number of trace files to create before overwriting the oldest one... | trace—To view this statement in the configuration.
trace-control—To add this statement to the configuration. | Statement introduced in Junos OS 19.4R1. | [
"Understanding Inline Monitoring Services"
] |
traceoptions (Interfaces) | traceoptions | [edit interfaces interface-name traceoptions] | CAUTION: Enabling tracing can adversely impact scale and performance and may
increase security risk. We strongly recommend using the trace, tracing, or traceoptions
commands only under the guidance of a JTAC support engineer. After collecting the
debug information, immediately disable tracing to minimize risk and resto... | [
{
"name": "flag - Tracing parameters",
"desc": ""
}
] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Command introduced in Junos OS Release 10.1. | [
"PPPoE-Based Radio-to-Router Protocols Overview"
] |
traceoptions (Juniper Secure Connect) | traceoptions {
file <filename> <files files> <match match> <size size> <(world-readable | no-world-
readable)>;
flag name;
level (brief | detail | extensive | verbose);
no-remote-trace;
} | [edit security remote-access] | CAUTION: Enabling tracing can adversely impact scale and performance and may
increase security risk. We strongly recommend using the trace, tracing, or traceoptions
commands only under the guidance of a JTAC support engineer. After collecting the
debug information, immediately disable tracing to minimize risk and resto... | [
{
"name": "filename",
"desc": "Name of file in which to write trace information."
},
{
"name": "files",
"desc": "Maximum number of trace files. Default: 3 Range: 2 through 1000"
},
{
"name": "match",
"desc": "Regular expression for lines to be logged."
},
{
"name": "no-worl... | trace | Statement introduced in Junos OS Release 20.3R1. | [
"Juniper Secure Connect Administrator Guide"
] |
traceoptions (LACP) | traceoptions {
file <filename> <files number> <size size> <world-readable | no-world-readable>;
flag flag;
no-remote-trace;
} | [edit protocols lacp] | CAUTION: Enabling tracing can adversely impact scale and performance and may
increase security risk. We strongly recommend using the trace, tracing, or traceoptions
commands only under the guidance of a JTAC support engineer. After collecting the
debug information, immediately disable tracing to minimize risk and resto... | [
{
"name": "filename",
"desc": "Name of the file to receive the output of the tracing operation. Enclose the name within"
},
{
"name": "files number",
"desc": "(Optional) Maximum number of trace files. When a trace file named trace-file reaches its"
},
{
"name": "flag",
"desc": "Traci... | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 7.6. | [
"Configuring LACP for Aggregated Ethernet Interfaces"
] |
traceoptions (Layer 2 Learning) | traceoptions {
file filename <files number> <size size> <world-readable | no-world-readable>;
flag flag (detail | disable | receive | send);
in-memory-debug;
level;
no-remote-trace;
} | [edit protocols l2-learning] | Define tracing operations for Layer 2 learning.
Default
The traceoptions feature is disabled by default. | [
{
"name": "file filename",
"desc": "Name of the file to receive the output of the tracing operation. Enclose the name within"
},
{
"name": "no-world-readable",
"desc": "(Optional) Restrict file access to the user who created the file."
},
{
"name": "size size",
"desc": "(Optional) Ma... | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 13.2. | [] |
traceoptions (LLDP) | traceoptions {
file filename <files number> <size maximum-file-size> <world-readable | no-world-readable>;
flag flag <disable>;
} | [edit protocols lldp],
[edit routing-instances routing-instance-name protocols lldp] | CAUTION: Enabling tracing can adversely impact scale and performance and may
increase security risk. We strongly recommend using the trace, tracing, or traceoptions
commands only under the guidance of a JTAC support engineer. After collecting the
debug information, immediately disable tracing to minimize risk and resto... | [
{
"name": "disable",
"desc": "(Optional) Disable the tracing operation. One use of this option is to disable a single operation when you have defined a broad group of tracing operations, such as all."
},
{
"name": "file filename",
"desc": "Name of the file to receive the output of the tracing op... | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 9.0. | [
"Configuring LLDP-MED (CLI Procedure)",
"Understanding LLDP and LLDP-MED on EX Series Switches",
"Understanding LLDP",
"Tracing LLDP Operations"
] |
traceoptions (MACsec interfaces) | traceoptions {
file filename <files number> <size size> <world-readable | no-world-readable>;
flag flag;
} | [edit security macsec interfaces interface-name] | CAUTION: Enabling tracing can adversely impact scale and performance and may
increase security risk. We strongly recommend using the trace, tracing, or traceoptions
commands only under the guidance of a JTAC support engineer. After collecting the
debug information, immediately disable tracing to minimize risk and resto... | [
{
"name": "file filename",
"desc": "Name of the file to receive the output of the tracing operation. Enclose the name within"
},
{
"name": "files number",
"desc": "(Optional) Maximum number of trace files. When a trace file named trace-file reaches the"
},
{
"name": "flag flag",
"des... | admin—To view this statement in the configuration.
admin-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 16.1. | [
"Configuring Media Access Control Security (MACsec) on Routers"
] |
traceoptions (MACsec) | traceoptions {
file filename <files number> <size size> <world-readable | no-world-readable>;
flag flag;
} | [edit security macsec] | CAUTION: Enabling tracing can adversely impact scale and performance and may
increase security risk. We strongly recommend using the trace, tracing, or traceoptions
commands only under the guidance of a JTAC support engineer. After collecting the
debug information, immediately disable tracing to minimize risk and resto... | [
{
"name": "file filename",
"desc": "Name of the file to receive the output of the tracing operation. Enclose the name within"
},
{
"name": "files number",
"desc": "(Optional) Maximum number of trace files. When a trace file named trace-file reaches the"
},
{
"name": "flag flag",
"des... | admin—To view this statement in the configuration.
admin-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 15.1. | [
"Configuring Media Access Control Security (MACsec) on Routers"
] |
traceoptions (Multicast Snooping Options) | traceoptions {
file filename<files number> <size size> <world-readable | no-world-readable>;
flag flag <disable>;
} | [edit multicast-snooping-options] | CAUTION: Enabling tracing can adversely impact scale and performance and may
increase security risk. We strongly recommend using the trace, tracing, or traceoptions
commands only under the guidance of a JTAC support engineer. After collecting the
debug information, immediately disable tracing to minimize risk and resto... | [
{
"name": "disable",
"desc": "(Optional) Disable the tracing operation. One use of this option is to disable a single operation"
},
{
"name": "file name",
"desc": "Name of the file to receive the output of the tracing operation. Enclose the name in"
},
{
"name": "files number",
"desc... | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 8.5. | [
"Configuring Multicast Snooping",
"Example: Configuring Multicast Snooping",
"Enabling Bulk Updates for Multicast Snooping",
"Example: Configuring Multicast Snooping"
] |
traceoptions (MVRP) | traceoptions {
file name <size size> <files number> <(world-readable | no-world-readable)>;
flag flag <flag-modifier> <disable>;
} | [edit logical-systems logical-system-name protocols mvrp],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
mvrp],
[edit protocols mvrp],
[edit routing-instances routing-instance-name protocols mvrp] | CAUTION: Enabling tracing can adversely impact scale and performance and may
increase security risk. We strongly recommend using the trace, tracing, or traceoptions
commands only under the guidance of a JTAC support engineer. After collecting the
debug information, immediately disable tracing to minimize risk and resto... | [
{
"name": "disable",
"desc": "(Optional) Disable the tracing operation. One use of this option is to disable a single operation when you have defined a broad group of tracing operations, such as all."
},
{
"name": "file",
"desc": ""
},
{
"name": "filename",
"desc": "Name of the file ... | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 10.1. | [
"Example: Configuring Automatic VLAN Administration Using MVRP on MX Series Routers",
"Configuring Multiple VLAN Registration Protocol (MVRP) to Manage Dynamic VLAN Registration",
"Verifying That MVRP Is Working Correctly",
"Understanding Multiple VLAN Registration Protocol (MVRP) for Dynamic VLAN Registratio... |
traceoptions (MX Series Virtual Chassis) | traceoptions {
file filename <files number> <match regular-expression> <no-stamp> <replace> <size size>
<world-readable | no-world-readable>;
flag flag <detail> <disable> <receive> <send>;
} | [edit virtual-chassis] | CAUTION: Enabling tracing can adversely impact scale and performance and may
increase security risk. We strongly recommend using the trace, tracing, or traceoptions
commands only under the guidance of a JTAC support engineer. After collecting the
debug information, immediately disable tracing to minimize risk and resto... | [
{
"name": "detail",
"desc": "(Optional) Generate detailed trace information for a flag."
},
{
"name": "disable",
"desc": "(Optional) Disable a flag."
},
{
"name": "file filename",
"desc": "Name of the file to receive the output of the tracing operation. Enclose the name within"
},
... | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 11.2. | [
"Configuring Preprovisioned Member Information for a Virtual Chassis",
"Tracing Virtual Chassis Operations for MX Series 5G Universal Routing Platforms",
"Example: Configuring Interchassis Redundancy for MX Series 5G Universal Routing Platforms Using a",
"Virtual Chassis"
] |
traceoptions (NETCONF and Junos XML Protocol) | traceoptions {
file <filename> <files number> <match regular-expression> <size size> <world-readable | no-
world-readable>;
flag flag;
no-remote-trace;
on-demand;
} | [edit system services netconf] | CAUTION: Enabling tracing can adversely impact scale and performance and may
increase security risk. We strongly recommend using the trace, tracing, or traceoptions
commands only under the guidance of a JTAC support engineer. After collecting the
debug information, immediately disable tracing to minimize risk and resto... | [
{
"name": "file filename",
"desc": "Name of the file in which to write trace information. All files are placed in the /var/log directory. Default: /var/log/netconf"
},
{
"name": "files number",
"desc": "(Optional) Maximum number of trace files. When a trace file named trace-file reaches its max... | system—To view this statement in the configuration.
system-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 12.2.
Support for Junos XML protocol sessions added in Junos OS Release 16.1.
Option flag debug introduced in Junos OS Release 16.1. | [
"NETCONF and Junos XML Protocol Tracing Operations Overview",
"Example: Tracing NETCONF and Junos XML Protocol Session Operations"
] |
traceoptions (NETCONF TLS) | traceoptions {
file <filename> <files files> <match match> <size size> <(world-readable | no-world-
readable)>;
flag name;
level (all | error | info | notice | verbose | warning);
no-remote-trace;
} | [edit system services netconf tls] | CAUTION: Enabling tracing can adversely impact scale and performance and may
increase security risk. We strongly recommend using the trace, tracing, or traceoptions
commands only under the guidance of a JTAC support engineer. After collecting the
debug information, immediately disable tracing to minimize risk and resto... | [
{
"name": "file filename",
"desc": "Name of the file to receive the output of the tracing operation. All files are placed in the /var/log directory. Default: /var/log/netconf-tls"
},
{
"name": "files number",
"desc": "(Optional) Maximum number of trace files. When a trace file named trace-file ... | system—To view this statement in the configuration.
system-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 20.2R1.
Statement introduced in Junos OS Evolved Release 21.4R1. | [] |
traceoptions (Next Gen Services Global System Logging) | traceoptions {
apply-groups group-names;
apply-groups-except group-names;
flag name;
file filename,
no-remote-trace;
} | [edit services rtlog] | CAUTION: Enabling tracing can adversely impact scale and performance and may
increase security risk. We strongly recommend using the trace, tracing, or traceoptions
commands only under the guidance of a JTAC support engineer. After collecting the
debug information, immediately disable tracing to minimize risk and resto... | [] | system | Support introduced in Junos OS Release 19.3R2 for Next Gen Services on MX Series routers MX240,
MX480 and MX960 with the MX-SPC3 services card. | [
"Understanding Next Gen Services CGNAT Global System Logging",
"Enabling Global System Logging for Next Gen Services",
"Configuring System Logging to One or More Remote Servers for Next Gen Services",
"Configuring Local System Logging for Next Gen Services"
] |
traceoptions (Next Gen Services Service-Set Flow) | traceoptions {
file {
filename;
files number;
match regular-expression;
size maximum-file-size;
(world-readable | no-world-readable);
}
flag flag;
no-remote-trace;
packet-filter filter-name {
conn-tag session-conn
destination-port port-identifi... | [edit services service-set name flow] | CAUTION: Enabling tracing can adversely impact scale and performance and may
increase security risk. We strongly recommend using the trace, tracing, or traceoptions
commands only under the guidance of a JTAC support engineer. After collecting the
debug information, immediately disable tracing to minimize risk and resto... | [
{
"name": "file",
"desc": "Configure the trace file options."
},
{
"name": "filename",
"desc": "Name of the file to receive the output of the tracing operation. Enclose the name within quotation marks. All files are placed in the directory /var/log. By default, the name of the file is the name o... | trace—To view this in the configuration.
trace-control—To add this to the configuration. | Statement introduced in Junos OS Release 20.3R1. | [] |
traceoptions (Next Gen Services Softwires) | traceoptions {
file {
filename;
files number;
match regular-expression;
(no-world-readable | world-readable);
size maximum-file-size;
}
flag (all | configuration | flow);
no-remote-trace;
} | [edit security softwires] | CAUTION: Enabling tracing can adversely impact scale and performance and may
increase security risk. We strongly recommend using the trace, tracing, or traceoptions
commands only under the guidance of a JTAC support engineer. After collecting the
debug information, immediately disable tracing to minimize risk and resto... | [
{
"name": "file",
"desc": "Configure trace file information."
},
{
"name": "filename",
"desc": "Name of the file to which to write the trace information."
},
{
"name": "files number",
"desc": "Maximum number of trace files."
},
{
"name": "match regular-expression",
"desc"... | trace—To view this statement in the configuration.
trace-control—To add this statement to the configuration. | Statement introduced before Release 12.1 of Junos OS. | [] |
traceoptions (Origin Validation for BGP) | traceoptions {
file filename <files number> <size size> <world-readable | no-world-readable>;
flag flag <flag-modifier> <disable>;
} | [edit logical-systems logical-system-name routing-instances instance-name routing-options
validation],
[edit logical-systems logical-system-name routing-instances instance-name routing-options
validation group group-name session address],
[edit logical-systems logical-system-name routing-options validation],
[edit lo... | CAUTION: Enabling tracing can adversely impact scale and performance and may
increase security risk. We strongly recommend using the trace, tracing, or traceoptions
commands only under the guidance of a JTAC support engineer. After collecting the
debug information, immediately disable tracing to minimize risk and resto... | [] | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 12.2. | [
"Use Case and Benefit of Origin Validation for BGP",
"Understanding Origin Validation for BGP",
"Example: Configuring Origin Validation for BGP"
] |
traceoptions (Outbound SSH) | traceoptions {
file <filename> <files number> <match regular-expression> <size size> <(world-readable | no-
world-readable)>;
flag flag;
no-remote-trace;
} | [edit system services outbound-ssh] | CAUTION: Enabling tracing can adversely impact scale and performance and may
increase security risk. We strongly recommend using the trace, tracing, or traceoptions
commands only under the guidance of a JTAC support engineer. After collecting the
debug information, immediately disable tracing to minimize risk and resto... | [
{
"name": "file",
"desc": "Configure the trace file information."
},
{
"name": "filename",
"desc": "(Optional) By default, the name of the file is the name of the process being traced. Use"
},
{
"name": "files number",
"desc": "(Optional) Specify the maximum number of trace files to ... | trace—To view this statement in the configuration.
trace-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 10.4. | [
"Displaying Log and Trace Files"
] |
traceoptions (OVSDB) | traceoptions {
file <filename> <files number> <match regular-expression> <no-world-readable | world-
readable> <size size>;
flag flag;
no-remote-trace;
} | [edit protocols ovsdb] | CAUTION: Enabling tracing can adversely impact scale and performance and may
increase security risk. We strongly recommend using the trace, tracing, or traceoptions
commands only under the guidance of a JTAC support engineer. After collecting the
debug information, immediately disable tracing to minimize risk and resto... | [
{
"name": "file filename",
"desc": "Name of file in which the system places the output of the tracing operations. By default, the system places all files in the /var/log directory. Default: /var/log/vgd"
},
{
"name": "files number",
"desc": "(Optional) Maximum number of trace files. When a trac... | admin—To view this statement in the configuration.
admin-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 14.1R2. | [] |
traceoptions (PCE) | traceoptions {
file filename <files number> <size size> <world-readable | no-world-readable>;
flag (all | pcep);
no-remote-trace;
} | [edit protocols pcep pce pce-id] | CAUTION: Enabling tracing can adversely impact scale and performance and may
increase security risk. We strongly recommend using the trace, tracing, or traceoptions
commands only under the guidance of a JTAC support engineer. After collecting the
debug information, immediately disable tracing to minimize risk and resto... | [
{
"name": "filename",
"desc": "Name of the file to receive the output of the tracing operation. All files are placed in the directory /var/log."
},
{
"name": "files number",
"desc": "(Optional) Maximum number of trace files. When a trace file named trace-file reaches its maximum size, it is rena... | routing and trace—To view this statement in the configuration.
routing-control and trace-control—To add this statement to the configuration. | [] | |
traceoptions (PCEF) | traceoptions {
file file-name <files number> <no-word-readable | world-readable> <size size>;
flag flag;
level (all | critical | error | info | notice | verbose | warning);
no-remote-trace;
} | [edit unified-edge pcef] | CAUTION: Enabling tracing can adversely impact scale and performance and may
increase security risk. We strongly recommend using the trace, tracing, or traceoptions
commands only under the guidance of a JTAC support engineer. After collecting the
debug information, immediately disable tracing to minimize risk and resto... | [
{
"name": "file file-name",
"desc": "Use the specified name of the file to receive the output of the tracing operation."
},
{
"name": "files",
"desc": ""
},
{
"name": "number",
"desc": "(Optional) Use the specified maximum number of trace files. When a trace file named trace-file rea... | trace and unified-edge—To view this statement in the configuration.
trace-control and unified-edge-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 17.1. | [
"Configuring Tracing for PCEF Operations"
] |
traceoptions (PIM Snooping) | traceoptions {
file filename <files number> <size size> <world-readable | no-world-readable>;
flag flag <flag-modifier> <disable>;
} | [edit routing-instances <instance-name> protocols pim-snooping],
[edit logical-systems <logical-system-name> routing-instances <instance-name> protocols pim-
snooping] | CAUTION: Enabling tracing can adversely impact scale and performance and may
increase security risk. We strongly recommend using the trace, tracing, or traceoptions
commands only under the guidance of a JTAC support engineer. After collecting the
debug information, immediately disable tracing to minimize risk and resto... | [
{
"name": "file filename",
"desc": "Name of the file to receive the output of the tracing operation. Enclose the name within"
},
{
"name": "flag flag",
"desc": "Tracing operation to perform. To specify more than one tracing operation, include multiple flag"
},
{
"name": "PIM Snooping Tra... | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 12.3. | [
"PIM Snooping for VPLS"
] |
traceoptions (Port Mirroring and Traffic Sampling) | traceoptions {
file filename <files number> <size bytes> <world-readable | no-world-readable>;
} | [edit forwarding-options port-mirroring],
[edit forwarding-options sampling] | CAUTION: Enabling tracing can adversely impact scale and performance and may
increase security risk. We strongly recommend using the trace, tracing, or traceoptions
commands only under the guidance of a JTAC support engineer. After collecting the
debug information, immediately disable tracing to minimize risk and rest... | [] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 7.4. | [
"Tracing Traffic-Sampling Operations"
] |
traceoptions (PPP Process) | traceoptions {
file filename <files number> <match regular-expression> <size size> <world-readable | no-
world-readable>;
flag flag;
level severity-level;
no-remote-trace;
} | [edit protocols ppp] | CAUTION: Enabling tracing can adversely impact scale and performance and may
increase security risk. We strongly recommend using the trace, tracing, or traceoptions
commands only under the guidance of a JTAC support engineer. After collecting the
debug information, immediately disable tracing to minimize risk and resto... | [
{
"name": "filename",
"desc": "Name of the file to receive the output of the tracing operation. Enclose the name within"
},
{
"name": "files number",
"desc": "(Optional) Maximum number of trace files. When a trace file named trace-file reaches its"
},
{
"name": "disable",
"desc": "(O... | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 7.5. | [
"Configuring PPP"
] |
traceoptions (PPPoE) | traceoptions {
file <filename> <files number> <match regular-expression > <size maximum-file-size> <world-
readable | no-world-readable>;
filter {
aci regular-expression;
ari regular-expresion;
service-name regular-expresion;
underlying-interface interface-name;
}
flag f... | [edit protocols pppoe] | CAUTION: Enabling tracing can adversely impact scale and performance and may
increase security risk. We strongly recommend using the trace, tracing, or traceoptions
commands only under the guidance of a JTAC support engineer. After collecting the
debug information, immediately disable tracing to minimize risk and resto... | [
{
"name": "file filename",
"desc": "Name of the file to receive the output of the tracing operation. Enclose the name within"
},
{
"name": "files number",
"desc": "(Optional) Maximum number of trace files to create before overwriting the oldest one. If"
},
{
"name": "disable",
"desc"... | trace—To view this statement in the configuration.
trace-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 9.6.
Option filter introduced in Junos OS Release 12.3 | [
"Configuring PPPoE Service Name Tables",
"Tracing PPPoE Operations"
] |
traceoptions (Process Monitor) | traceoptions {
file filename files number match regex size size (world-readable | no-world-readable);
flag flag;
level level;
no-remote-trace;
} | [edit system processes process-monitor] | CAUTION: Enabling tracing can adversely impact scale and performance and may
increase security risk. We strongly recommend using the trace, tracing, or traceoptions
commands only under the guidance of a JTAC support engineer. After collecting the
debug information, immediately disable tracing to minimize risk and resto... | [
{
"name": "file",
"desc": ""
},
{
"name": "filename",
"desc": "Name of the file to receive the output of the tracing operation. Enclose the name within quotation marks. To include the file statement, you must specify a filename."
},
{
"name": "files number",
"desc": "(Optional) Maxim... | trace—To view this statement in the configuration.
trace-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 9.0. | [] |
traceoptions (programmable-rpd) | traceoptions {
file filename <files number> <size size> <world-readable | no-world-readable>;
flag flag <disable>;
} | [edit routing-options programmable-rpd] | CAUTION: Enabling tracing can adversely impact scale and performance and may
increase security risk. We strongly recommend using the trace, tracing, or traceoptions
commands only under the guidance of a JTAC support engineer. After collecting the
debug information, immediately disable tracing to minimize risk and resto... | [
{
"name": "file",
"desc": ""
},
{
"name": "filename",
"desc": "Name of the file to receive the output of the tracing operation. Enclose the name within quotation marks. All files are placed in the directory /var/log."
},
{
"name": "files",
"desc": ""
},
{
"name": "number",
... | routing and trace—To view this statement in the configuration.
routing-control and trace-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 16.2. | [] |
traceoptions (Protocols AMT) | traceoptions {
file filename <files number> <size size> <world-readable | no-world-readable>;
flag flag <flag-modifier> <disable>;
} | [edit logical-systems logical-system-name protocols amt],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols amt],
[edit protocols amt],
[edit routing-instances routing-instance-name protocols amt] | CAUTION: Enabling tracing can adversely impact scale and performance and may
increase security risk. We strongly recommend using the trace, tracing, or traceoptions
commands only under the guidance of a JTAC support engineer. After collecting the
debug information, immediately disable tracing to minimize risk and resto... | [
{
"name": "disable",
"desc": "(Optional) Disable the tracing operation. You can use this option to disable a single operation"
},
{
"name": "file filename",
"desc": "Name of the file to receive the output of the tracing operation. Enclose the name within"
},
{
"name": "files number",
... | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 10.2. | [
"Configuring the AMT Protocol"
] |
traceoptions (Protocols BFD) | traceoptions {
file name <size size> <files number> <world-readable | no-world-readable>;
flag flag <flag-modifier> <disable>;
} | [edit protocols bfd] | CAUTION: Enabling tracing can adversely impact scale and performance and may
increase security risk. We strongly recommend using the trace, tracing, or traceoptions
commands only under the guidance of a JTAC support engineer. After collecting the
debug information, immediately disable tracing to minimize risk and resto... | [
{
"name": "disable",
"desc": "(Optional) Disable the tracing operation. You can use this option to disable a single operation"
},
{
"name": "file name",
"desc": "Name of the file to receive the output of the tracing operation. Enclose the name within"
},
{
"name": "files number",
"de... | routing and trace—To view this statement in the configuration.
routing-control and trace-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 7.4.
issu flag for BFD added in Junos OS Release 9.1. | [
"Managing and Tracing BFD Sessions During Unified ISSU Procedures"
] |
traceoptions (Protocols BGP) | traceoptions {
file filename <files number> <size size> <world-readable | no-world-readable>;
flag flag <flag-modifier> <disable>;
} | [edit logical-systems logical-system-name protocols bgp],
[edit logical-systems logical-system-name protocols bgp group group-name],
[edit logical-systems logical-system-name protocols bgp group group-name neighbor address],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols bgp... | CAUTION: Enabling tracing can adversely impact scale and performance and may
increase security risk. We strongly recommend using the trace, tracing, or traceoptions
commands only under the guidance of a JTAC support engineer. After collecting the
debug information, immediately disable tracing to minimize risk and resto... | [
{
"name": "disable",
"desc": "(Optional) Disable the tracing operation. You can use this option to disable a single operation"
},
{
"name": "file name",
"desc": "Name of the file to receive the output of the tracing operation. Enclose the name within"
},
{
"name": "files number",
"de... | routing and trace—To view this statement in the configuration.
routing-control and trace-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 7.4.
4byte-as statement introduced in Junos OS Release 9.2.
4byte-as statement introduced in Junos OS Release 9.2 for EX Series switches.
ipsec statement introduced in Junos OS Evolved Release 21.3R1. | [
"Tracing Nonstop Active Routing Synchronization Events",
"Understanding Trace Operations for BGP Protocol Traffic",
"Configuring OSPF Refresh and Flooding Reduction in Stable Topologies"
] |
traceoptions (Protocols BMP) | traceoptions {
file file-name <files number> <size size> <world-readable | no-world-readable>;
flag flag <flag-modifier> <disable>;
} | [edit logical-systems logical-system-name routing-options bmp],
[edit logical-systems logical-system-name routing-options bmp station station-name],
[edit routing-options bmp],
[edit routing-options bmp station station-name] | CAUTION: Enabling tracing can adversely impact scale and performance and may
increase security risk. We strongly recommend using the trace, tracing, or traceoptions
commands only under the guidance of a JTAC support engineer. After collecting the
debug information, immediately disable tracing to minimize risk and resto... | [
{
"name": "file file-name",
"desc": "Name of the file to receive the output of the tracing operation. Enclose the name within"
},
{
"name": "files number",
"desc": "(Optional) Maximum number of trace files. When a trace file named trace-file.0 reaches its"
},
{
"name": "flag",
"desc"... | routing and trace—To view this statement in the configuration.
routing-control and trace-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 13.2X51-D15. | [
"Tracing BMP Operations",
"Understanding Trace Operations for BGP Protocol Traffic",
"Configuring OSPF Refresh and Flooding Reduction in Stable Topologies"
] |
traceoptions (Protocols DVMRP) | traceoptions {
file filename <files number> <size size> <world-readable | no-world-readable>;
flag flag <flag-modifier> <disable>;
} | [edit logical-systems logical-system-name protocols dvmrp],
[edit protocols dvmrp] | CAUTION: Enabling tracing can adversely impact scale and performance and may
increase security risk. We strongly recommend using the trace, tracing, or traceoptions
commands only under the guidance of a JTAC support engineer. After collecting the
debug information, immediately disable tracing to minimize risk and resto... | [
{
"name": "disable",
"desc": "(Optional) Disable the tracing operation. You can use this option to disable a single operation"
},
{
"name": "file filename",
"desc": "Name of the file to receive the output of the tracing operation. Enclose the name within"
},
{
"name": "files number",
... | routing and trace—To view this statement in the configuration.
routing-control and trace-control—To add this statement to the configuration. | NOTE: Distance Vector Multicast Routing Protocol (DVMRP) was deprecated in Junos
OS Release 16.1. Although DVMRP commands continue to be available and configurable
in the CLI, they are no longer visible and are scheduled for removal in a subsequent
release.
Statement introduced before Junos OS Release 7.4. | [
"Tracing DVMRP Protocol Traffic"
] |
traceoptions (Protocols EVPN) | traceoptions {
file filename <files number> <size size> <world-readable | no-world-readable>;
flag flag <flag-modifier>;
} | [edit logical-systems logical-system-name routing-instances routing-instance-name protocols]
[edit routing-instances routing-instance-name protocols evpn] | CAUTION: Enabling tracing can adversely impact scale and performance and may
increase security risk. We strongly recommend using the trace, tracing, or traceoptions
commands only under the guidance of a JTAC support engineer. After collecting the
debug information, immediately disable tracing to minimize risk and resto... | [
{
"name": "file filename",
"desc": "Name of the file to receive the output of the tracing operation. Enclose the name in"
},
{
"name": "files number",
"desc": "(Optional) Maximum number of trace files. When a trace file named trace-file reaches the"
},
{
"name": "flag flag",
"desc": ... | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 13.2 .
Support for logical systems on MX Series routers added in Junos OS Release 17.4R1. | [
"Tracing EVPN Traffic and Operations"
] |
traceoptions (Protocols IGMP Snooping) | traceoptions {
file filename <files number> <size size> <world-readable | no-world-readable> ;
flag flag (detail | disable | receive | send);
} | [edit logical-systems logical-system-name bridge-domains domain-name protocols igmp-snooping],
[edit logical-systems logical-system-name routing-instances instance-name bridge-domains domain-
name protocols igmp-snooping],
[edit logical-systems logical-system-name routing-instances instance-name protocols igmp-
snoopi... | Define tracing operations for IGMP snooping.
Default
The traceoptions feature is disabled by default.
Enabling traceoptions under the igmp-snooping hierarchy enables igmp-snooping. Correspondingly,
disabling traceoptions under the igmp-snooping hierarchy disables igmp-snooping. | [
{
"name": "file filename",
"desc": "Name of the file to receive the output of the tracing operation. All files are placed in the"
},
{
"name": "files number",
"desc": "(Optional) Maximum number of trace files. When a trace file named trace-file reaches its"
},
{
"name": "flag flag",
... | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 8.5. | [
"Configuring IGMP Snooping Trace Operations",
"Configuring IGMP Snooping",
"Example: Configuring IGMP Snooping on SRX Series Devices",
"IGMP Snooping Overview"
] |
traceoptions (Protocols IGMP) | traceoptions {
file filename <files number> <size size> <world-readable | no-world-readable>;
flag flag <flag-modifier> <disable>;
} | [edit logical-systems logical-system-name protocols igmp],
[edit protocols igmp] | CAUTION: Enabling tracing can adversely impact scale and performance and may
increase security risk. We strongly recommend using the trace, tracing, or traceoptions
commands only under the guidance of a JTAC support engineer. After collecting the
debug information, immediately disable tracing to minimize risk and resto... | [
{
"name": "disable",
"desc": "(Optional) Disable the tracing operation. You can use this option to disable a single operation"
},
{
"name": "file filename",
"desc": "Name of the file to receive the output of the tracing operation. Enclose the name within"
},
{
"name": "files number",
... | routing and trace—To view this statement in the configuration.
routing-control and trace-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 7.4. | [
"Tracing IGMP Protocol Traffic"
] |
traceoptions (Protocols IPv6 Neighbor Discovery) | traceoptions {
file filename <files number> <size size> <world-readable | no-world-readable>;
flag flag <disable>;
} | [edit logical-systems logical-system-name protocols router-advertisement],
[edit protocols router-advertisement] | CAUTION: Enabling tracing can adversely impact scale and performance and may
increase security risk. We strongly recommend using the trace, tracing, or traceoptions
commands only under the guidance of a JTAC support engineer. After collecting the
debug information, immediately disable tracing to minimize risk and resto... | [
{
"name": "disable",
"desc": "(Optional) Disable the tracing operation. One use of this option is to disable a single operation"
},
{
"name": "file filename",
"desc": "Name of the file to receive the output of the tracing operation. Enclose the name in"
},
{
"name": "files number",
"... | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 7.4. | [
"Example: Configuring IPv6 Interfaces and Enabling Neighbor Discovery"
] |
traceoptions (Protocols IS-IS) | traceoptions {
file name <size size> <files number> <world-readable | no-world-readable>;
flag flag <flag-modifier> <disable>;
} | [edit logical-systems logical-system-name protocols isis],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
isis],
[edit protocols isis],
[edit routing-instances routing-instance-name protocols isis] | CAUTION: Enabling tracing can adversely impact scale and performance and may
increase security risk. We strongly recommend using the trace, tracing, or traceoptions
commands only under the guidance of a JTAC support engineer. After collecting the
debug information, immediately disable tracing to minimize risk and resto... | [
{
"name": "disable",
"desc": "(Optional) Disable the tracing operation. You can use this option to disable a single operation"
},
{
"name": "file name",
"desc": "Name of the file to receive the output of the tracing operation. Enclose the name within"
},
{
"name": "files number",
"de... | routing and trace—To view this statement in the configuration.
routing-control and trace-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 7.4. | [
"Example: Configuring the Transmission Frequency for CSNP Packets on IS-IS Interfaces",
"Example: Enabling Packet Checksums on IS-IS Interfaces for Error Checking",
"Example: Configuring the Transmission Frequency for Link-State PDUs on IS-IS Interfaces",
"Understanding Link-State PDU Throttling for IS-IS Int... |
traceoptions (Protocols Layer 2 Circuit) | traceoptions {
file filename <files number> <size size> <world-readable | no-world-readable>;
flag flag <flag-modifier> <disable>;
} | [edit logical-systems logical-system-name protocols l2circuit],
[edit protocols l2circuit] | CAUTION: Enabling tracing can adversely impact scale and performance and may
increase security risk. We strongly recommend using the trace, tracing, or traceoptions
commands only under the guidance of a JTAC support engineer. After collecting the
debug information, immediately disable tracing to minimize risk and resto... | [
{
"name": "disable",
"desc": "(Optional) Disable the tracing operation. You can use this option to disable a single operation"
},
{
"name": "file filename",
"desc": "Name of the file to receive the output of the tracing operation. Enclose the name in"
},
{
"name": "files number",
"de... | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 7.4. | [
"Tracing Layer 2 Circuit Operations"
] |
traceoptions (Protocols Layer 2 VPN) | traceoptions {
file filename <files number> <size size> <world-readable | no-world-readable>;
flag flag <flag-modifier> <disable>;
} | [edit logical-systems logical-system-name routing-instances routing-instance-name protocols
l2vpn],
[edit routing-instances routing-instance-name protocols l2vpn] | CAUTION: Enabling tracing can adversely impact scale and performance and may
increase security risk. We strongly recommend using the trace, tracing, or traceoptions
commands only under the guidance of a JTAC support engineer. After collecting the
debug information, immediately disable tracing to minimize risk and resto... | [
{
"name": "disable",
"desc": "(Optional) Disable the tracing operation. You can use this option to disable a single operation"
},
{
"name": "file filename",
"desc": "Name of the file to receive the output of the tracing operation. Enclose the name in"
},
{
"name": "files number",
"de... | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 7.4. | [
"Tracing Layer 2 VPN Traffic and Operations"
] |
traceoptions (Protocols LDP) | traceoptions {
file filename <files number> <size size> <world-readable | no-world-readable>;
flag flag <flag-modifier> <disable>;
} | [edit logical-systems logical-system-name protocols ldp],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols ldp],
[edit protocols ldp],
[edit routing-instances routing-instance-name protocols ldp] | CAUTION: Enabling tracing can adversely impact scale and performance and may
increase security risk. We strongly recommend using the trace, tracing, or traceoptions
commands only under the guidance of a JTAC support engineer. After collecting the
debug information, immediately disable tracing to minimize risk and resto... | [
{
"name": "disable",
"desc": "(Optional) Disable the tracing operation. You can use this option to disable a single operation"
},
{
"name": "file filename",
"desc": "Name of the file to receive the output of the tracing operation. Enclose the name within"
},
{
"name": "files number",
... | routing and trace—To view this statement in the configuration.
routing-control and trace-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 7.4.
match-on address option for the filter flag modifier added in Junos OS Release 10.4.
nsr-synchronization and p2mp-nsr-synchronization operations for flag statement introduced in Junos OS
Release 13.3. | [
"Tracing LDP Protocol Traffic",
"Junos OS Network Management Administration Guide for Routing Devices"
] |
traceoptions (Protocols Link Management) | traceoptions {
file filename <files number> <size size> <world-readable | no-world-readable>;
flag flag <flag-modifier> <disable>;
} | [edit logical-systems logical-system-name protocols link-management],
[edit protocols link-management] | CAUTION: Enabling tracing can adversely impact scale and performance and may
increase security risk. We strongly recommend using the trace, tracing, or traceoptions
commands only under the guidance of a JTAC support engineer. After collecting the
debug information, immediately disable tracing to minimize risk and resto... | [
{
"name": "disable",
"desc": "(Optional) Disable the tracing operation. You can use this option to disable a single operation"
},
{
"name": "filename",
"desc": "Name of the file to receive the output of the tracing operation. Enclose the name within"
},
{
"name": "files number",
"des... | routing and trace—To view this statement in the configuration.
routing-control and trace-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 7.4.
Support for hello-packets, packets, and state flags added in Junos OS Release 8.1. | [
"Tracing LMP Traffic",
"Junos OS Network Management Administration Guide for Routing Devices"
] |
traceoptions (Protocols MPLS) | traceoptions {
file filename <files number> <size size> <world-readable | no-world-readable>;
flag flag;
} | [edit logical-systems logical-system-name protocols mpls],
[edit logical-systems logical-system-name protocols mpls label-switched-path lsp-name],
[edit protocols mpls],
[edit protocols mpls label-switched-path lsp-name] | CAUTION: Enabling tracing can adversely impact scale and performance and may
increase security risk. We strongly recommend using the trace, tracing, or traceoptions
commands only under the guidance of a JTAC support engineer. After collecting the
debug information, immediately disable tracing to minimize risk and resto... | [
{
"name": "filename",
"desc": "Name of the file to receive the output of the tracing operation. All files are placed in the"
},
{
"name": "files number",
"desc": "(Optional) Maximum number of trace files. When a trace file named trace-file reaches its"
},
{
"name": "flag",
"desc": "T... | routing and trace—To view this statement in the configuration.
routing-control and trace-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 12.3X50 for the QFX Series.
ted-export option introduced in Junos OS Release 14.2.
ted-import option introduced in Junos OS Release 14.2.
lsp-history option added in Junos OS Release 15.1. | [
"Tracing MPLS and LSP Packets and Operations"
] |
traceoptions (Protocols MSDP) | traceoptions {
file filename <files number> <size size> <world-readable | no-world-readable>;
flag flag <flag-modifier> <disable>;
} | [edit logical-systems logical-system-name protocols msdp],
[edit logical-systems logical-system-name protocols msdp group group-name],
[edit logical-systems logical-system-name protocols msdp group group-name peer address],
[edit logical-systems logical-system-name protocols msdp peer address],
[edit logical-systems lo... | CAUTION: Enabling tracing can adversely impact scale and performance and may
increase security risk. We strongly recommend using the trace, tracing, or traceoptions
commands only under the guidance of a JTAC support engineer. After collecting the
debug information, immediately disable tracing to minimize risk and resto... | [
{
"name": "disable",
"desc": "(Optional) Disable the tracing operation. You can use this option to disable a single operation"
},
{
"name": "file filename",
"desc": "Name of the file to receive the output of the tracing operation. Enclose the name within"
},
{
"name": "files number",
... | routing and trace—To view this statement in the configuration.
routing-control and trace-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 7.4. | [
"Tracing MSDP Protocol Traffic"
] |
traceoptions (Protocols MVPN) | traceoptions {
file filename <files number> <size size> <world-readable | no-world-readable>;
flag flag <flag-modifier> <disable>;
} | [edit logical-systems logical-system-name protocols mvpn],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
mvpn],
[edit protocols mvpn],
[edit routing-instances routing-instance-name protocols mvpn] | CAUTION: Enabling tracing can adversely impact scale and performance and may
increase security risk. We strongly recommend using the trace, tracing, or traceoptions
commands only under the guidance of a JTAC support engineer. After collecting the
debug information, immediately disable tracing to minimize risk and resto... | [
{
"name": "disable",
"desc": "(Optional) Disable the tracing operation. You can use this option to disable a single operation"
},
{
"name": "file filename",
"desc": "Name of the file to receive the output of the tracing operation. Enclose the name in"
},
{
"name": "files number",
"de... | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 8.4.
Support at the [edit protocols mvpn] hierarchy level introduced in Junos OS Release 13.3. | [
"Tracing MBGP MVPN Traffic and Operations"
] |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.