command stringlengths 2 75 | syntax stringlengths 0 289k | hierarchy_level stringlengths 0 6.91k | description stringlengths 0 45.2k | options listlengths 0 499 | required_privilege_level stringlengths 0 330k | release_information stringlengths 0 3.14k | related_documentation listlengths 0 22 |
|---|---|---|---|---|---|---|---|
dialer-options | dialer-options {
activation-delay seconds;
callback;
callback-wait-period time;
deactivation-delay seconds;
dial-string [ dial-string-numbers ];
idle-timeout seconds;
incoming-map {
caller caller-number | accept-all;
initial-route-check seconds;
load-interval seconds... | [edit interfaces umd0],
[edit interfaces dln unit logical-unit-number],
[edit logical-systems logical-system-name interfaces dln unit logical-unit-number] | Specify the dialer options for configuring logical interfaces for group and user sessions.
The remaining statements are explained separately. See CLI Explorer.
You can use the new CLI option self-recover-time to configure the amount of time the cl interface waits
to reconnect to a network after a disconnect occurs. In ... | [] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 7.4. | [
"Junos OS Services Interfaces Library for Routing Devices"
] |
dialin | dialin (console | routable); | [edit interfaces umd0 modem-options] | For J Series Services Routers, configure a USB modem port to act as a dial-in console or WAN backup
port. | [
{
"name": "console",
"desc": "Configure the USB modem port to operate as a dial-in console for management."
},
{
"name": "routable",
"desc": "Configure the USB modem port to operate as a dial-in WAN backup interface. Default: console"
}
] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 8.5. | [] |
diameter (Subscriber Aware Policy Control) | diameter {
applications {
pcc-gx {
<maximum-pending-requests requests>;
}
}
<firmware-revision version>;
network-element element-name {
function function-name;
peer peer-name {
priority priority-value;
<timeout seconds>;
}
... | [edit access] | CAUTION: Enabling tracing can adversely impact scale and performance and may
increase security risk. We strongly recommend using the trace, tracing, or traceoptions
commands only under the guidance of a JTAC support engineer. After collecting the
debug information, immediately disable tracing to minimize risk and resto... | [] | access—To view this statement in the configuration.
access-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 17.1. | [
"Configuring Diameter Profiles"
] |
diameter (TDF Gateway) | diameter {
network-element {
element-name {
session-pics {
group {
group-name {
[session-pic interface-name];
}
}
}
}
}
} | [edit unified-edge tdf gateway-name] | Configure the Diameter protocol parameters associated with Diameter bindings for this TDF gateway.
NOTE: If you want to set up Diameter bindings for session PICs on the TDF gateway,
contact Juniper Networks Professional Services for assistance.
The remaining statements are explained separately. See CLI Explorer. | [] | unified-edge—To view this statement in the configuration.
unified-edge-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 17.1. | [
"Configuring Diameter Profiles"
] |
diameter | diameter {
network-element element-name {
dne-origin realm realm-name <host hostname>;
forwarding {
route dne-route-name {
destination realm realm-name <host hostname>;
function function-name <partition partition-name>;
metric route-metric;... | [edit] | Configure the Diameter base protocol for subscriber management.
The remaining statements are explained separately. Search for a statement in CLI Explorer or click a
linked statement in the Syntax section for details. | [
{
"name": "product-name name",
"desc": "Name of a product to advertise in the Capability Exchange Request and Capability-Exchange Answer messages to a Diameter peer. The name is included in the Diameter AVP Product-Name (269). If you change the product-name, the MX series router acting as a BNG disconnects ... | admin—To view this statement in the configuration.
admin-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 9.6.
product-name option added in Junos OS Release 18.3R1 on MX Series routers. | [
"Configuring Diameter"
] |
diameter-instance (Diameter Applications) | diameter-instance instance-name; | [edit access gx-plus partition partition-name]
[edit access ocs partition partition-name],
[edit access pcrf partition partition-name] | Specify the Diameter instance associated with the Gx-Plus, OCS, or PCRF partition. | [
{
"name": "instance-name",
"desc": "Name of the Diameter instance. Currently, only master is supported."
}
] | admin—To view this statement in the configuration.
admin-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 11.2.
Support at the [edit access ocs partition partition-name] and [edit access pcrf partition partition-name]
hierarchy levels introduced in Junos OS Release 16.2. | [
"Configuring Gx-Plus",
"Configuring the Gx-Plus Partition",
"Configuring the OCS Partition",
"Understanding Gx Interactions Between the Router and the PCRF",
"Understanding Gy Interactions Between the Router and the OCS"
] |
diameter-instance (JSRC) | diameter-instance instance-name | [edit jsrc partition partition-name] | Specify the Diameter instance associated with the JSRC partition. | [
{
"name": "instance-name",
"desc": "Name of the Diameter instance. Currently, only master is supported."
}
] | admin—To view this statement in the configuration.
admin-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 9.6. | [
"JSRC Configuration Overview",
"Configuring the JSRC Partition"
] |
diameter-profile (PCEF Profile) | diameter-profile gx-profile-name; | [edit unified-edge pcef profiles profile-name dynamic-policy-control],
[edit services pcef profiles profile-name dynamic-policy-control] | Specify the Diameter Gx profile to use for the PCEF dynamic policy control profile. A PCEF profile with
dynamic policy control must reference a defined Diameter Gx profile.
If you are using Junos OS Broadband Subscriber Management, specify the Diameter Gx profile at the
[edit services pcef profiles profile-name dynamic... | [
{
"name": "gx-profile-name",
"desc": "Name of the Diameter Gx profile to use with this dynamic policy control profile."
}
] | For Junos OS Broadband Subscriber Management:
services—To view this statement in the configuration.
services–control—To add this statement to the configuration.
For Junos OS Subscriber Aware:
unified-edge—To view this statement in the configuration.
unified-edge-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 17.1.
Support at the [edit services pcef profiles profile-name dynamic-policy-control] hierarchy level introduced for
Junos OS Broadband Subscriber Management in Junos OS Release 18.2R1 on MX Series. | [
"Configuring a Policy and Charging Enforcement Function Profile for Subscriber Management",
"Configuring a Policy and Charging Enforcement Function Profile for Junos OS Subscriber Aware",
"Dynamic Policies"
] |
dictionary | dictionary dictionary-path; | [edit system services extensible-subscriber-services] | Configure an XML-based dictionary file. The dictionary path is the complete path to the dictionary file
and includes the dictionary filename. Extensible Subscriber Services Manager acts on the extensible-
subscriber-service request on the basis of the services configured in the dictionary file. This
configuration is ma... | [
{
"name": "dictionary-path",
"desc": "Path to the dictionary file. The complete path including the filename must not be more than 127 characters."
}
] | system—To view this statement in the configuration.
system-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 15.1. | [
"Understanding the Dictionary File"
] |
diffserv-te | diffserv-te {
bandwidth-model {
extended-mam;
mam;
rdm;
}
te-class-matrix {
tenumber {
priority priority;
traffic-class {
ctnumber priority priority;
}
}
}
} | [edit logical-systems logical-system-name protocols mpls],
[edit protocols mpls] | Specify properties for differentiated services in traffic engineering. | [] | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 7.4. | [
"Configuring Routers for DiffServ-Aware Traffic Engineering"
] |
direct-access (Commit Scripts) | direct-access; | [edit system scripts commit] | Enable SLAX and XSLT commit scripts to read the input configuration directly from the database.
During a commit operation, the management process exports the post-inheritance candidate
configuration in XML format and passes it as input to the commit script. If the configuration is large, the
script driver might have tr... | [] | maintenance—To view or add this statement in the configuration. | Statement introduced in Junos OS Release 9.1. | [
"Processing Large Configurations Against Commit Scripts"
] |
direct-connect | direct-connect; | [edit dynamic-profiles profile-name interfaces demux0 unit logical-unit-number family pppoe],
[edit dynamic-profiles profile-name interfaces interface-name unit logical-unit-number family
pppoe],
[edit dynamic-profiles profile-name interfaces interface-name unit logical-unit-number pppoe-
underlying-options],
[edit in... | Configure the router to ignore any DSL Forum VSAs that it receives in PPPoE control packets when the
router is directly connected to CPE devices. | [] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS 13.3. | [
"Ignoring DSL Forum VSAs from Directly Connected Devices",
"Configuring an Underlying Interface for Dynamic PPPoE Subscriber Interfaces",
"Configuring the PPPoE Family for an Underlying Interface",
"Dynamic PPPoE Subscriber Interfaces over Static Underlying Interfaces Overview"
] |
direction (Application Identification) | direction {
any;
client-to-server;
server-to-client;
} | [edit services application-identification application application-name over protocol-type signature name
member name ] | The connection direction of the packets to apply pattern matching. You can specify match patterns on
both client to server and server to client while configuring custom application signatures. | [
{
"name": "any",
"desc": "The directions of packets are either from client-side to server-side or from server-side to client-side."
},
{
"name": "client-to-server",
"desc": "The direction of packets is from client-side to server-side."
},
{
"name": "server-to-client",
"desc": "The di... | services—To view this statement in the configuration.
services-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 15.1X49-D40.
Support for Next Gen Services introduced in Junos OS Releases 19.3R2 and 19.4R1 on MX Series
MX240, MX480 and MX960 using the MX-SPC3 services card. | [
"Understanding Junos OS Application Identification Custom Application Signatures"
] |
direction (forwarding-class-accounting) | direction (ingress | egress | both) | [edit interfaces interface-name forwarding-class-accounting],
[edit interfaces interface-name unit logical-unit-number forwarding-class-accounting] | Specify the direction of traffic for which you want to apply counters. A single aggregate counter per
forwarding class is used for flows. Forwarding class accounting applies to IPv4, IPv6, MPLS, Layer 2 and
Other traffic. | [] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 13.3R3 in MX Series. | [] |
direction (Junos OS) | direction (inbound | outbound | bidirectional) {
authentication {
algorithm (hmac-md5-96 | hmac-sha1-96);
key (ascii-text key | hexadecimal key);
}
auxiliary-spi auxiliary-spi-value;
encryption {
algorithm (des-cbc | 3des-cbc);
key (ascii-text key | hexadecimal key);
... | [edit security ipsec security-association sa-name manual] | Define the direction of IPsec processing. | [
{
"name": "inbound",
"desc": "Inbound SA—Define algorithms, keys, or security parameter index (SPI) values to decrypt and"
},
{
"name": "outbound",
"desc": "Outbound SA—Define algorithms, keys, or SPI values to decrypt and authenticate outbound"
},
{
"name": "bidirectional",
"desc": ... | system—To view this statement in the configuration.
system-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 7.4. | [
"Configuring Manual IPsec Security Associations for an ES PIC",
"Example: Using IPsec to Protect BGP Traffic"
] |
direction (Junos-FIPS Software) | direction (bidirectional | inbound | outbound) {
protocol esp;
spi spi-value;
encryption {
algorithm 3des-cbc;
key ascii-text ascii-text-string;
}
} | [edit security ipsec internal security-association manual],
[edit security trusted-channel ipsec security-association manual] | Establish a manual security association (SA) for internal Routing-Engine–to–Routing-Engine
communication. | [
{
"name": "bidirectional",
"desc": "Apply the same SA values in both directions between Routing Engines."
},
{
"name": "inbound",
"desc": "Apply these SA properties only to the inbound IPsec tunnel."
},
{
"name": "outbound",
"desc": "Apply these SA properties only to the outbound IPs... | Crypto Officer—To view and add this statement in the configuration. | Statement introduced before Junos OS Release 7.4. | [] |
direction (MEP) | direction (up | down); | [edit protocols oam ethernet connectivity-fault-management maintenance-domain domain-name
maintenance-association ma-name mep mep-id] | Configure the direction of the MEP. | [
{
"name": "up",
"desc": "An UP MEP CCM is transmitted out of every logical interface which is part of the same bridging or"
},
{
"name": "down",
"desc": "Down MEP CCMs are transmitted only out the interface configured on this MEP."
}
] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 8.4. | [
"Configuring a MEP to Generate and Respond to CFM Protocol Messages",
"IEEE 802.1ag OAM Connectivity Fault Management Overview"
] |
direction (MX Series) | direction (inbound | outbound); | [edit security macsec connectivity-association connectivity-association-name secure-channel
secure-channel-name] | Configure whether the secure channel applies MACsec security to traffic entering or leaving an
interface.
If you need to apply MACsec on traffic entering and leaving an interface, you need to create one secure
channel to apply MACsec on incoming traffic and another secure channel to apply MACsec on outgoing
traffic wit... | [
{
"name": "inbound",
"desc": "Enable MACsec security on traffic entering the interface that has applied the secure channel."
},
{
"name": "outbound",
"desc": "Enable MACsec security on traffic leaving the interface that has applied the secure channel. The remaining statements are explained separ... | admin—To view this statement in the configuration.
admin-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 15.1. | [
"Configuring Media Access Control Security (MACsec) on Routers"
] |
direction (RFC 2544 Benchmarking Tests) | direction (egress | ingress); | [edit services monitoring rfc2544 tests test-name test-name] | Specify the direction of the interface on which the test must be run. This parameter is valid only for a
ccc , a ethernet-switching or a bridge family. RFC2544 tests are supported only in the egress direction or
the user-to-network interface (UNI) direction of an E-line or E-LAN service parameters in a bridge
domain be... | [
{
"name": "egress",
"desc": "Run the test in the egress direction of the interface (network-to-network interface (NNI)). This option is applicable for a ccc, bridge, or ethernet-switching family."
},
{
"name": "ingress",
"desc": "Run the test in the ingress direction of the interface (user-to-ne... | system—To view this statement in the configuration.
system-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 12.3X52.
Statement introduced in Junos OS Evolved Release 22.4R1. | [
"RFC 2544-Based Benchmarking Tests Overview",
"Understanding RFC 2544-Based Benchmarking Tests on MX Series Routers",
"Configuring an RFC 2544-Based Benchmarking Test"
] |
direction (Secure-channel) | direction (inbound | outbound); | [edit security macsec connectivity-association connectivity-association-name secure-channel secure-
channel-name] | Configure whether the secure channel applies MACsec security to traffic entering or leaving an
interface.
If you need to apply MACsec on traffic entering and leaving an interface, you need to create one secure
channel to apply MACsec on incoming traffic and another secure channel to apply MACsec on outgoing
traffic wit... | [
{
"name": "inbound",
"desc": "Enable MACsec security on traffic entering the interface that has applied the secure channel."
},
{
"name": "outbound",
"desc": "Enable MACsec security on traffic leaving the interface that has applied the secure channel. The remaining statements are explained separ... | admin—To view this statement in the configuration.
admin-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 13.2X50-D15. | [
"Configuring MACsec on EX, QFX and SRX Devices"
] |
direction (Security Custom Attack) | direction (any | client-to-server | server-to-client); | [edit security idp custom-attack attack-name attack-type anomaly],
[edit security idp custom-attack attack-name attack-type signature] | Define the connection direction of the attack. | [
{
"name": "any",
"desc": "Detect the attack in either direction."
},
{
"name": "client-to-server",
"desc": "Detect the attack only in client-to-server traffic."
},
{
"name": "server-to-client",
"desc": "Detect the attack only in server-to-client traffic."
}
] | security—To view this statement in the configuration.
security-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 9.3. | [] |
direction (Security Dynamic Attack Group) | direction {
expression (and | or);
values [any client-to-server exclude-any exclude-client-to-server exclude-server-to-client
server-to-client];
} | [edit security idp dynamic-attack-group dynamic-attack-group-name filters] | Specify a direction filter to add predefined attacks to the dynamic group based on the direction specified
in the attacks. | [
{
"name": "expression",
"desc": "Boolean operators:"
},
{
"name": "and",
"desc": "If both the member name patterns match, the expression matches."
},
{
"name": "or",
"desc": "If either of the member name patterns match, the expression matches."
},
{
"name": "values",
"des... | security—To view this statement in the configuration.
security-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 9.3. The expression option added in Junos OS Release 11.4. | [] |
direction (Service Data Flow Filters) | direction (uplink | downlink | both); | [edit unified-edge pcef flow-descriptions flow-identifier],
[edit services pcef flow-descriptions flow-identifier] | Specify the direction in which service data flow (SDF) filters will detect service flow IP packets.
If you are using Junos OS Subscriber Aware, specify the direction at the [edit unified-edge pcef flow-
descriptions flow-identifier] hierarchy level.
If you are using Junos OS Broadband Subscriber Management, specify the... | [
{
"name": "uplink",
"desc": "SDF filters are applied in the uplink direction."
},
{
"name": "downlink",
"desc": "SDF filters are applied in the downlink direction."
},
{
"name": "both",
"desc": "SDF filters are applied in both the uplink and downlink directions."
}
] | For Junos OS Subscriber Aware:
unified-edge—To view this statement in the configuration.
unified-edge-control—To add this statement to the configuration.
For Junos OS Broadband Subscriber Management:
services—To view this statement in the configuration.
services–control—To add this statement to the configuration. | Statement introduced in Junos OS Release 17.1.
Support at the [edit services pcef flow-descriptions flow-identifier] hierarchy level introduced for Junos OS
Broadband Subscriber Management in Junos OS Release 17.2 on MX Series. | [
"Configuring Service Data Flow Filters",
"Understanding Predefined Policy and Charging Control Rules for Subscriber-Aware Traffic Treatment",
"Understanding Application-Aware Policy Control for Subscriber Management"
] |
direction (services) | direction (inbound | outbound | bidirectional) {
protocol (ah | bundle | esp);
spi spi-value;
auxiliary-spi spi-value;
authentication {
algorithm (hmac-md5-96 | hmac-sha1-96);
key (ascii-text key | hexadecimal key);
}
encryption {
algorithm algorithm;
key (ascii-... | [edit services ipsec-vpn rule rule-name term term-name then manual] | Specify the direction in which manual SAs are applied. | [
{
"name": "bidirectional",
"desc": "Apply the SA in both directions."
},
{
"name": "inbound",
"desc": "Apply the SA on inbound traffic."
},
{
"name": "outbound",
"desc": "Apply the SA on outbound traffic."
}
] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 7.4. | [
"Configuring IPsec Rules"
] |
direction | direction (any | client-to-server | server-to-client) ; | [edit services application-identification nested-application name signature name member name] | Specify the connection direction of the packets to apply pattern matching. | [
{
"name": "any",
"desc": "Apply pattern matching to the packets from a client to a server and from a server to a client."
},
{
"name": "client-to-server",
"desc": "Apply pattern matching to the packets from a client to the server."
},
{
"name": "server-to-client",
"desc": "Apply patt... | system—To view this statement in the configuration.
system control—To add this statement to the configuration. | Statement introduced in Junos OS Release 10.2. | [
"Application Identification for Nested Applications"
] |
director-device (Aliases) | director-device director-device-name {
assigned-director-device-name;
} | [edit fabric aliases] | (QFabric systems only) Specify the mapping of user-defined names to QFabric system Director devices.
NOTE: The following rules apply to QFabric component alias naming:
•
Alias names must use alphabetic (A through Z and a through z), numeric (0 through 9),
or dash (-) characters.
•
The maximum length of an alias name is... | [
{
"name": "director-device-name",
"desc": "Specify a user-defined name for a QFabric system Director device."
},
{
"name": "assigned-director-device-name",
"desc": "Specify the Director device identifier or name that has been provided."
}
] | admin—To view this statement in the configuration.
admin-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 12.2. | [
"Configuring Aliases for the QFabric System",
"Understanding the Director Group"
] |
disable (APPID Application Group) | disable; | [edit services application-identification application-group group-name] | Disable application group properties. | [] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 9.5. | [
"Configuring Application Groups"
] |
disable (APPID Application) | disable; | [edit services application-identification application application-name] | Disable this application definition. | [] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 9.5. | [
"Defining an Application Identification"
] |
disable (APPID Port Mapping) | disable; | [edit services application-identification application application-name port-mapping] | Disable port-mapping properties for application identification. | [] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 9.5. | [
"Defining an Application Identification"
] |
disable (Application Tracking) | disable; | [edit security application-tracking] | Disable application tracking on a device without deleting the zone configuration.
Application tracking is enabled by default. If application tracking has been previously disabled and you
want to reenable it, delete the configuration statement that specifies disabling of application tracking as
shown in the following st... | [] | security—To view this statement in the configuration.
security-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 11.4. | [
"Example: Configuring AppTrack"
] |
disable (BGP Graceful Restart) | disable; | [edit logical-systems logical-system-name protocols bgp graceful-restart],
[edit logical-systems logical-system-name protocols bgp group group-name graceful-restart],
[edit logical-systems logical-system-name protocols bgp group group-name neighbor address
graceful-restart],
[edit protocols bgp graceful-restart],
[ed... | Disable graceful restart for BGP. Graceful restart allows a routing device undergoing a restart to inform
its adjacent neighbors and peers of its condition.
NOTE: When you disable graceful restart at one level in the configuration statement
hierarchy, it is also disabled at lower levels in the same hierarchy. For examp... | [] | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 7.4. | [
"Configuring Graceful Restart Options for BGP"
] |
disable (DCBX) | disable | [edit protocols dcbx]
[edit protocols dcbx interface interface-name] | Disable Data Center Bridging Capability Exchange protocol (DCBX) on one or more 10-Gigabit Ethernet
interfaces.
Default
DCBX is enabled by default on all 10-Gigabit or higher Ethernet interfaces.
DCBX is enabled by default on all 10-Gigabit Ethernet interfaces on EX4500 CEE-enabled switches. | [] | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 11.1. | [
"Configuring DCBX Autonegotiation",
"Disabling DCBX to Disable PFC Autonegotiation on EX Series Switches (CLI Procedure)",
"Understanding DCB Features and Requirements",
"Understanding DCB Features and Requirements on EX Series Switches"
] |
DISABLE (DTCP) | DISABLE DTCP/0.8
Csource-ID: user-name
Criteria-ID: variable
X-Drop-Policy: variable
Flags: flags | Specify the DTCP attributes used in DISABLE messages to remove a drop policy created by a prior DTCP
ENABLE command.
This DTCP message is supported for the radius-flow-tap service. It is not supported for the FlowTapLite
service.
NOTE: Consult the documentation for your mediation device to learn how to configure
DTCP m... | [
{
"name": "X-Drop-Policy:",
"desc": ""
},
{
"name": "variable",
"desc": "Name of the policy that determines which mirrored packets are no longer sent to the mediation device."
}
] | Not applicable.
Sample Output
command-name
ENABLE DTCP/0.8DISABLE DTCP/0.8
Csource-ID: ft-user
Criteria-ID: 8
X-Drop-Policy: drop_pol
Flags: STATIC
Seq: 1
DTCP/0.8 200 OK
SEQ: 1
CRITERIA-COUNT: 1
TIMESTAMP: 2022-01-24 11:58:47.927 | Command introduced in Junos OS Release 12.3. | [
"DTCP Messages Used for Subscriber Secure Policy",
"DTCP-Initiated Subscriber Secure Policy Overview"
] | |
disable (Dynamic IGMP) | "disable:$junos-igmp-enable"; | [edit dynamic-profiles profile-name protocols igmp interface interface-name] | Disable IGMP on the interface.
NOTE: Though the purpose of this statement is to disable IGMP on interfaces, under the
dynamic-profiles hierarchy you can use this statement and an enable variable
(disable:$junos-igmp-enable) to ensure that IGMP is not disabled by a AAA-based
authentication and management method (RADIUS)... | [] | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 9.2. | [
"Dynamic IGMP Configuration Overview",
"Configuring Dynamic DHCP Client Access to a Multicast Network",
"Disabling IGMP"
] |
disable (Dynamic MLD) | disable; | [edit dynamic-profiles profile-name protocols mld interface interface-name] | Disable MLD on the dynamic interface. | [] | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 10.1. | [
"Dynamic MLD Configuration Overview",
"Disabling MLD"
] |
disable (Extensible Subscriber Services Manager) | disable | [edit system processes extensible-subscriber-services] | Disable the Extensible Subscriber Services Manager process when there is an extensible-subscriber-
services configuration and the user wants to stop the process. The process is disabled by default when
there is no configuration under the [edit system services extensible-subscriber-services] hierarchy level.
Default
The... | [] | system—To view this statement in the configuration.
system-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 15.1. | [] |
disable (Forwarding Options) | disable; | [edit forwarding-options port-mirror],
[edit forwarding-options port-mirror instance instance-name],
[edit forwarding-options sampling],
[edit forwarding-options sampling instance instance-name],
[edit forwarding-options sampling family (inet | inet6 | mpls | vpls)],
[edit forwarding-options sampling family (inet | ine... | Disable traffic accounting, port mirroring, or sampling.
NOTE: The disable statement at the [edit forwarding-options sampling] hierarchy level
disables only Routing Engine-based sampling. To disable PIC-based sampling and inline
sampling, include the disable statement at the [edit forwarding-options sampling instance
i... | [] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 7.4.
Statement added to port-mirror hierarchy in Junos OS Release 9.6.
NOTE: Beginning in Junos OS Release 15.1F5 and later 15.1 releases and Junos OS
Release 16.1 and later, the disable option has been deprecated at the forwarding-options
sampling instance instance-name fa... | [
"Disabling Traffic Sampling",
"Configuring Traffic Sampling on MX, M and T Series Routers",
"Configuring Port Mirroring on M, T MX, ACX, and PTX Series Routers"
] |
disable (GMPLS) | disable; | [edit logical-systems logical-system-name protocols link-management te-link te-link-name],
[edit protocols link-management te-link te-link-name] | Disable a traffic engineering link.
Default
The configured object is enabled (operational) unless explicitly disabled. | [] | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 7.4. | [
"Disabling the Traffic Engineering Link for LMP Peers"
] |
disable (IGMP Snooping) | disable; | [edit protocols igmp-snooping vlan vlan-name] | Disable IGMP snooping on the VLAN. Without IGMP snooping, multicast traffic will be flooded to all
interfaces on the VLAN except the source interface.
This option is available only on legacy switches that do not support the Enhanced Layer 2 Software (ELS)
configuration style. On these switches, IGMP snooping is enabled... | [] | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 9.2. | [
"Example: Configuring IGMP Snooping on Switches",
"Configuring IGMP Snooping on Switches"
] |
disable (Interface) | disable; | [edit interfaces interface-name],
[edit interfaces interface-name unit logical-unit-number],
[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number] | Disable a physical or a logical interface, effectively unconfiguring it.
CAUTION:
•
Dynamic subscribers and logical interfaces use physical interfaces for connection to
the network. The Junos OS allows you to set the interface to disable and commit the
change while dynamic subscribers and logical interfaces are still ... | [] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 12.2 for ACX Series Universal Metro Routers. | [
"Disabling a Physical Interface",
"Disabling a Logical Interface"
] |
disable (Link Protection) | disable; | [edit interfaces aeX aggregated-ether-options lacp link-protection] | Disable LACP link protection on the interface. | [] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 9.3. | [
"Configuring LACP for Aggregated Ethernet Interfaces",
"Configuring LACP Link Protection of Aggregated Ethernet Interfaces for Switches"
] |
disable (Long-Lived Graceful Restart for BGP Restarter) | disable; | [edit logical-systems logical-system-name protocols bgp family (l2vpn | route-target | inet)
(labeled-unicast | flow) graceful-restart long-lived restarter],
[edit logical-systems logical-system-name protocols bgp group group-name family (l2vpn | route-
target | inet) (labeled-unicast | flow) graceful-restart long-liv... | Disable the long-lived graceful restart capability for BGP sessions on the restarting router. A hidden
enable attribute can be used to override an inherited disable attribute. Configuring graceful-restart long-
lived restarter at the neighbor level (when it is not configured at the containing group level or globally)
c... | [] | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 15.1. | [
"Configuring Graceful Restart Options for BGP",
"Junos OS High Availability User Guide"
] |
disable (Multicast Load Balancing) | disable; | [edit chassis multicast-loadbalance] | (EX8200 switches only) Disable multicast load balancing. After you configure this statement and commit
it, multicast load balancing no longer balances traffic on aggregated 10-gigabit Ethernet interfaces that
are currently configured as well as those that are configured later. | [] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 12.2 for EX Series switches. | [
"Configuring Multicast Load Balancing for Use with Aggregated 10-Gigabit Ethernet Links on EX8200",
"Switches (CLI Procedure)"
] |
disable (Multicast Snooping) | disable; | [edit multicast-snooping-options graceful-restart] | Explicitly disable graceful restart for multicast snooping. | [] | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 12.3. | [
"Example: Configuring Multicast Snooping"
] |
disable (MVRP) | disable; | [edit protocols mvrp],
[edit protocols mvrp interface(all | interface-name)] | Disable the MVRP configuration on the interface.
Default
MVRP is disabled by default. | [] | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 10.0. | [
"Configuring Multiple VLAN Registration Protocol (MVRP) on Switches"
] |
disable (PIM) | disable; | [edit logical-systems logical-system-name protocols pim],
[edit logical-systems logical-system-name protocols pim family (inet | inet6)],
[edit logical-systems logical-system-name protocols pim interface (Protocols PIM) interface-name],
[edit logical-systems logical-system-name protocols pim rp local family (inet | i... | Explicitly disable PIM at the protocol, interface or family hierarchy levels. | [] | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 7.4.
disable statement extended to the [family] hierarchy level in Junos OS Release 9.6. | [
"Disabling PIM"
] |
disable (PoE) | disable; | [edit poe interface (all | interface-name)],
[edit poe interface (all | interface-name) telemetries] | Disables the PoE capabilities of the port. If PoE capabilities are disabled for a port, the port operates as a
standard network access port. If the disable statement is specified after the telemetries statement,
logging of PoE power consumption for the port is disabled. To disable monitoring and retain the stored
inter... | [] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 9.5. | [] |
disable (Power over Ethernet) | disable; | [edit poe interface (all | all-extended | interface-name)],
[edit poe interface (all | all-extended | interface-name) telemetries],
[edit poe notification-control fpc slot-number] | Disable a PoE interface, disable the collection of power consumption data for a PoE interface, or disable
the generation of the PoE SNMP traps. The action of the disable statement depends on which statement
it is used with:
•
When used with interface—Disable the PoE capability of this interface. The interface operates ... | [] | system—To view this statement in the configuration.
system-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 9.0.
all-extended option introduced in Junos OS Release 16.1R1.
Statement introduced in Junos OS Release 17.2R1 for a Junos Fusion Provider Edge. | [
"Example: Configuring PoE Interfaces with Different Priorities on an EX Series Switch",
"Configuring PoE Interfaces on EX Series Switches",
"Configuring Power over Ethernet in a Junos Fusion"
] |
disable (Protocols BGP) | disable; | [edit logical-systems logical-system-name protocols bgp],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols bgp],
[edit protocols bgp],
[edit routing-instances routing-instance-name protocols bgp] | Disable BGP on the system. | [] | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 7.4. | [] |
disable (Protocols LDP) | disable; | [edit logical-systems logical-system-name protocols ldp graceful-restart],
[edit logical-systems logical-system-name protocols ldp interface interface-name],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols ldp
interface interface-name],
[edit logical-systems logical-system-n... | Explicitly disable LDP on an interface, or explicitly disable LDP graceful restart.
Default
LDP is enabled on interfaces configured with the LDP interface statement. LDP graceful restart is
automatically enabled when graceful restart is enabled under the [edit routing-options] hierarchy level. | [] | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 7.4. | [
"Enabling and Disabling LDP",
"Configuring LDP Graceful Restart"
] |
disable (Protocols MLD Snooping) | disable; | [edit protocols mld-snooping vlan (all | vlan-name)] | Disable MLD snooping on the VLAN. Multicast traffic will be flooded to all interfaces in the VLAN
except the source interface.
Default
If you do not include this statement, MLD snooping is enabled on all interfaces in the VLAN. | [] | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 12.1. | [
"Configuring MLD Snooping on an EX Series Switch VLAN (CLI Procedure)"
] |
disable (Protocols MLD) | disable; | [edit logical-systems logical-system-name protocols mld interface interface-name],
[edit protocols mld interface interface-name] | Disable MLD on the system. | [] | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 7.4. | [
"Disabling MLD"
] |
disable (Protocols MPLS) | disable; | [edit logical-systems logical-system-name protocols mpls],
[edit logical-systems logical-system-name protocols mpls interface interface-name],
[edit logical-systems logical-system-name protocols mpls label-switched-path lsp-name],
[edit logical-systems logical-system-name protocols mpls label-switched-path lsp-name aut... | Disable the functionality of the configured object.
Default
The configured object is enabled (operational) unless explicitly disabled. | [] | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 7.4. | [] |
disable (Protocols MSDP) | disable; | [edit logical-systems logical-system-name protocols msdp],
[edit logical-systems logical-system-name protocols msdp group group-name],
[edit logical-systems logical-system-name protocols msdp group group-name peer address],
[edit logical-systems logical-system-name protocols msdp peer address],
[edit logical-systems lo... | Explicitly disable MSDP. | [] | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 7.4. | [
"Disabling MSDP"
] |
disable (Protocols Router Discovery) | disable; | [edit logical-systems logical-system-name protocols router-discovery],
[edit protocols router-discovery] | Disable router discovery.
Default
The configured object is enabled (operational) unless explicitly disabled. | [] | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 7.4. | [
"Understanding the ICMP Protocol for Discovering Gateways to Other Networks",
"Example: Configuring the ICMP Protocol for Discovering Gateways to Other Networks"
] |
disable (Protocols RSVP) | disable; | [edit logical-systems logical-system-name protocols rsvp],
[edit logical-systems logical-system-name protocols rsvp graceful-restart],
[edit logical-systems logical-system-name protocols rsvp interface interface-name],
[edit logical-systems logical-system-name protocols rsvp interface interface-name link-
protection],
... | Explicitly disable RSVP or RSVP graceful restart. Explicitly disable link protection on the specified
interface.
Default
RSVP is enabled on interfaces and peer interfaces configured with the RSVP interface statement. RSVP
graceful restart is enabled on the router. Link protection is disabled. | [] | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 7.4. | [
"Minimum RSVP Configuration",
"Configuring RSVP Graceful Restart",
"Configuring Link Protection on Interfaces Used by LSPs"
] |
disable (Protocols SAP) | disable; | [edit logical-systems logical-system-name protocols sap],
[edit protocols sap] | Explicitly disable SAP. | [] | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 7.4. | [
"Configuring the Session Announcement Protocol"
] |
disable (Protocols) | disable;
Hierarchy: disable (Protocols IGMP)
[edit logical-systems logical-system-name protocols igmp interface interface-name],
[edit protocols igmp interface interface-name]
Hierarchy: disable (Protocols SAP)
[edit logical-systems logical-system-name protocols sap],
[edit protocols sap]
Hierarchy: disable (Protocols... | disable (Protocols IGMP)disables IGMP on the system.
disable (Protocols SAP)explicitly disables SAP.
disable (Protocols MSDP) explicitly disables MSDP.
disable (Protocols MLD)disables MLD on the system.
disable (PIM Graceful Restart)explicitly disables PIM sparse mode graceful restart.
disable (Protocols DVMRP)explici... | [] | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | address (Local RPs) and disable (Protocols IGMP) and disable (Protocols SAP) and disable (PIM) and disable
(Protocols MLD) and disable (Protocols MSDP) introduced before Junos OS Release 7.4.
address (Local RPs) and disable (Protocols IGMP)introduced in Junos OS Release 9.0 for EX Series switches.
disable (IGMP Snoopin... | [
"Disabling IGMP",
"Disabling MLD",
"Disabling PIM",
"Configuring the Session Announcement Protocol",
"Configuring PIM Sparse Mode Graceful Restart",
"Example: Configuring Multicast Snooping",
"Configuring MLD Snooping on an EX Series Switch VLAN (CLI Procedure)"
] | |
disable (Routing Graceful Restart) | disable; | [edit logical-systems logical-system-name protocols (bgp | isis | ldp | ospf | ospf3 | pim | rip
| ripng | rsvp) graceful-restart],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols (bgp
| ldp | ospf | ospf3 | pim) graceful-restart],
[edit protocols (bgp | esis | isis | ospf ... | Disable graceful restart. | [] | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 7.4. | [
"Enabling Graceful Restart",
"Configuring Routing Protocols Graceful Restart",
"Configuring Graceful Restart for MPLS-Related Protocols",
"Configuring VPN Graceful Restart",
"Configuring Logical System Graceful Restart",
"Graceful Restart Configuration Statements",
"Configuring Graceful Restart for QFab... |
disable (Routing Options) | disable; | [edit logical-systems logical-system-name routing-instances routing-instance-name routing-options
graceful-restart],
[edit logical-systems logical-system-name routing-options graceful-restart],
[edit routing-instances routing-instance-name routing-options graceful-restart],
[edit routing-options graceful-restart] | Disable graceful restart. | [] | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 7.4. | [
"Junos OS High Availability User Guide"
] |
disable (STP) | disable; | [edit logical-systems logical-system-name protocols mstp],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
mstp],
[edit protocols mpls],
[edit protocols mpls interface (all | interface-name)],
[edit protocols mstp],
[edit protocols mstp (all | interface-name)],
[edit protoco... | Disable the entire MSTP, RSTP, or VSTP instance on a specific interface.
NOTE: You cannot disable spanning tree parameters for all interfaces.
Default
Not enabled | [] | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 9.0.
Statement updated in Junos OS Release 9.4 for EX Series switches to add VSTP support.
Support for logical systems added in Junos OS Release 9.6.
Statement updated in Junos OS Release 15.1 for EX Series switches. | [
"Understanding RSTP",
"Configuring Multiple Spanning Tree Protocol",
"Configuring RSTP on EX Series Switches (CLI Procedure)",
"Configuring MSTP on Switches",
"Disabling MSTP",
"Example: Configuring BPDU Protection on Interfaces to Prevent STP Miscalculations on EX Series",
"Switches",
"Example: Confi... |
disable | disable service-name; | [edit services service-set services-set-name subscriber-profile profile-name] | Disable the service name of the subscriber profile. | [
{
"name": "service-name",
"desc": "Name of the disabled service."
}
] | admin—To view this statement in the configuration.
admin-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 11.4. | [] |
disable-4byte-as | disable-4byte-as; | [edit protocols bgp],
[edit protocols bgp group group-name ],
[edit protocols bgp group group-name neighbor ip-address ] | Use to enable a BGP peer that uses a 4-Byte to interact with another BGP peer old speaker that uses 2-
Byte.
NOTE: We recommend that you configure disable-4byte-as only if the BGP peer does not
support or ignores the capability advertisement of 4byte-as, and brings up the session as
a 2byte AS. | [] | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 19.3. | [] |
disable-action | disable-action; | [edit protocols l2-learning global-mac-move] | (MX Series routers only) Disable the MAC move action feature globally. MAC move detection
configuration does exist, but the action is disabled. | [] | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 13.2. | [
"Configuring MAC Move Parameters"
] |
disable-all-instances | disable-all-instances; | [edit forwarding-options port-mirror] | Disable all port mirroring instances globally.
Usage Guidelines
See Configuring Port Mirroring on M, T MX, ACX, and PTX Series Routers. | [] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 9.6. | [] |
disable-calling-number-avp (L2TP LAC) | disable-calling-number-avp; | [edit services l2tp] | Prevent the LAC from sending L2TP Calling Number AVP 22 in incoming-call request (ICRQ) packets to
the LNS. By default, the LAC in an L2TP network generates this AVP from the Calling-Station-Id and
sends it to the LNS. | [] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 10.4. | [
"L2TP Subscriber Access Lines and Connection Speeds"
] |
disable-failover-protocol (L2TP) | disable-failover-protocol; | [edit services l2tp] | 15.1R6
Starting in Junos OS Releases 15.1R6, 16.1R5, 16.2R2, 17.1R2, and 17.2R1, the disable-failover-
protocol statement is deprecated and no longer needs to be used. | [] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 11.2.
Statement deprecated in Junos OS Release 15.1R6, 16.1R5, 16.2R2, 17.1R2, and 17.2R1.
Change History Table
Feature support is determined by the platform and release you are using. Use Feature Explorer to
determine if a feature is supported on your platform.
Release | [
"Configuring the L2TP Peer Resynchronization Method"
] |
disable-fpc (DDoS) | disable-fpc; | [edit system ddos-protection global],
[edit system ddos-protection protocols protocol-group (aggregate | packet-type)],
[edit system ddos-protection protocols protocol-group (aggregate | packet-type) fpc slot-number] | (MX Series routers with only MPCs, T4000 routers with only FPC5s, PTX Series routers, EX9200
switches, or QFX Series switches) Disable DDoS policers for debugging purposes on the card in the
specified slot for a particular packet type within a protocol group, on all cards for a particular packet
type within a protocol ... | [] | admin—To view this statement in the configuration.
admin-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 11.2.
Support at the [edit system ddos-protection protocols protocol-group (aggregate | packet-type)] hierarchy level
introduced in Junos OS Release 12.1. | [
"Disabling Control Plane DDoS Protection Policers and Logging Globally",
"Configuring Control Plane DDoS Protection Aggregate or Individual Packet Type Policers"
] |
disable-global-timeout-override | disable-global-timeout-override; | [edit interfaces interface-name services-options]
[edit services service-set service-set-name service-set-options | Disallow overriding a global inactivity or session timeout. | [] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 10.0.
Support added in Junos OS Release 20.3R1 for Next Gen Services on MX240, MX480, and MX960
routers. | [
"Defining an Application Identification"
] |
disable-grant-bypass | disable-grant-bypass; | [edit chassis fabric] | Disable the fabric grant bypass feature. This feature is used for communication between Packet
Forwarding Engines. For instance, when a Packet Forwarding Engine wants to send a packet to another
Packet Forwarding Engine (on the same MPC or on a different MPC), a request is sent to the Packet
Forwarding Engine across t... | [] | view | Statement introduced in Junos OS Release 16.1. | [
"Understanding Fabric Grant Bypass",
"Disabling Fabric Grant Bypass to Control Congestion and Improve Performance",
"Re-Enabling Fabric Grant Bypass"
] |
disable-https-filtering | disable-https-filtering; | [edit services web-filter profile name url-filter-template] | When you configure disable-https-filtering, the system permits or bypasses all HTTPS traffic. The TERM
action takes priority over the disable-https-filtering command. | [] | system—To view this statement in the configuration.
system-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 24.3R1. | [] |
disable-interface-id-tlv | disable-interface-id-tlv; | [edit dynamic-profiles name protocols pim hello-options],
[edit logical-systems name protocols pim hello-options],
[edit logical-systems name routing-instances name protocols pim hello-options],
[edit logical-systems name tenants name routing-instances name protocols pim hello-options],
[edit protocols pim hello-option... | Junos OS Evolved supports the exchange of local interface-id and router-id PIM hello options on PIM-
enabled routers by default as stated in RFC 6395. You can disable this behavior by configuring the
disable-interface-id-tlv configuration statement. By doing this, the TLV carrying router-id and interface-id
is disable... | [] | Statement introduced in Junos OS Release 25.2R1. | [] | |
disable-logging (DDoS) | disable-logging; | [edit system ddos-protection global],
[edit system ddos-protection protocols protocol-group (aggregate | packet-type)] | Disable device-wide logging of all DDoS violation and flow detection events globally. Disable only
logging of events other than flow detection culprit flow events for a particular packet type or for a
protocol group. Typically used for debugging purposes. | [] | admin—To view this statement in the configuration.
admin-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 11.2.
Support at the [edit system ddos-protection protocols protocol-group (aggregate | packet-type)] hierarchy level
introduced in Junos OS Release 12.1. | [
"Disabling Control Plane DDoS Protection Policers and Logging Globally",
"Configuring Control Plane DDoS Protection Aggregate or Individual Packet Type Policers",
"Disabling Automatic Logging of Culprit Flow Events for a Packet Type"
] |
disable-mlppp-inner-ppp-pfc | disable-mlppp-inner-ppp-pfc; | [edit interfaces interface-name unit logical-unit-number],
[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number] | For MLPPP interfaces only, disable compression of the inner PPP header in the MLPPP payload. By
default, compression is enabled. | [] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 8.2. | [
"Configuring Link and Multilink Services Logical Interfaces"
] |
disable-natt (Services IPsec VPN) | disable-natt; | [edit services ipsec-vpn] | Before Junos OS Release 17.4R1, Network Address Translation-Traversal (NAT-T) is not supported for
the Junos VPN Site Secure suite of IPsec features on the MX Series routers. In Junos OS releases before
17.4R1, disable NAT-traversal (NAT-T) when a NAT device is present between two IPsec gateways to
cause the Encapsulat... | [] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 16.1. | [
"Disabling NAT-T on MX Series Routers for Handling NAT with IPsec-Protected Packets"
] |
disable-notification-extensions (BGP Graceful Restart) | disable-notification-extensions {
omit-no-export;
} | [edit logical-systems logical-system-name protocols bgp graceful-restart],
[edit logical-systems logical-system-name protocols bgp group group-name graceful-restart],
[edit logical-systems logical-system-name protocols bgp group group-name neighbor address
graceful-restart],
[edit logical-systems logical-system-name r... | Disables the transmission of the N flag in the graceful restart capability negotiation, but in addition, it
disables the new rules for invoking graceful restart receiver mode as specified in the IETF bgp-gr-
notification draft, and disables the transmission of the Hard Reset subcode. The Hard Reset subcode is
continued... | [] | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 15.1. | [
"Configuring Graceful Restart Options for BGP",
"Junos OS High Availability User Guide"
] |
disable-notification-flag (BGP Graceful Restart) | disable-notification-flag {
omit-no-export;
} | [edit logical-systems logical-system-name protocols bgp graceful-restart],
[edit logical-systems logical-system-name protocols bgp group group-name graceful-restart],
[edit logical-systems logical-system-name protocols bgp group group-name neighbor address
graceful-restart],
[edit logical-systems logical-system-name r... | Disables the transmission of the notification (N) flag in the graceful restart capability negotiation. The
BGP protocol sends a notification NOTIFICATION message and reset the peering session to handle the
error condition. BGP graceful restart that permits the operational procedures to be performed when the
BGP speaker... | [] | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 15.1. | [
"Configuring Graceful Restart Options for BGP",
"Junos OS High Availability User Guide"
] |
disable-packet-register | disable-packet-register; | [edit dynamic-profiles name protocols pim],
[edit logical-systems name protocols pim],
[edit logical-systems name routing-instances name protocols pim],
[edit logical-systems name tenants name routing-instances name protocols pim],
[edit protocols pim],
[edit routing-instances name protocols pim],
[edit tenants name ro... | Disable PIM packet registers on the first-hop router.
With PIM, the first-hop router (FHR) is the device connected to the PIM rendezvous point (RP). With the
usual PIM behavior, the FHR encapsulates multicast packets in PIM register messages (which registers
the source with the PIM RP) and sends the register messages t... | [] | Statement introduced in Junos OS Release 23.3R1. | [] | |
disable-preceding-key | disable-preceding-key; | [edit security macsec connectivity-association connectivity-association-name] | Disable the preceding pre-shared key (PSK) so that the fallback PSK is used to establish a MACsec
connection during a pre-shared-key change event.
When you enable MACsec using static CAK security mode, a preshared PSK is exchanged between the
devices on each end of the point-to-point Ethernet link. The PSK must match ... | [] | admin—To view this statement in the configuration.
admin-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 19.2R1. | [
"Configuring MACsec with Fallback PSK"
] |
disable-relay | disable-relay; | [edit forwarding-options dhcp-relay overrides],
[edit forwarding-options dhcp-relay group group-name overrides],
[edit logical-systems logical-system-name forwarding-options dhcp-relay overrides],
[edit logical-systems logical-system-name forwarding-options dhcp-relay group group-name
overrides],
[edit logical-systems... | Disable DHCP relay on specific interfaces in a group. | [] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 8.3. | [
"Extended DHCP Relay Agent Overview"
] |
disable-routing-engine (DDoS) | disable-routing-engine; | [edit system ddos-protection global],
[edit system ddos-protection protocols protocol-group (aggregate | packet-type)],
[edit system ddos-protection protocols protocol-group aggregate] | (ACX Series routers, MX Series routers with only MPCs, T4000 Core Routers with only FPC5s, or
EX9200 switches) Disable DDoS Routing Engine policers for debugging purposes for a particular packet
type as follows:
•
Within a protocol group—Use this option in the protocols statement hierarchy.
•
Globally for all packet ty... | [] | admin—To view this statement in the configuration.
admin-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 11.2. | [
"Disabling Control Plane DDoS Protection Policers and Logging Globally"
] |
disable-signature-check | disable-signature-check; | [edit services monitoring rfc2544 tests test-name test-name] | Disable signature verification on the received test frames. This statement is valid only if you configure
the test mode to be a reflector. The configuration is useful when the test traffic is generated using a
third-party vendor tool, instead of an ACX Series router. | [] | system—To view this statement in the configuration.
system-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 12.3X53.
Statement introduced in Junos OS Evolved Release 22.4R1. | [
"RFC 2544-Based Benchmarking Tests Overview",
"Understanding RFC 2544-Based Benchmarking Tests on MX Series Routers",
"Supported RFC 2544-Based Benchmarking Statements on MX Series Routers",
"Configuring an RFC 2544-Based Benchmarking Test"
] |
disable-timeout (BPDU) | disable-timeout seconds; | [edit protocols layer2-control bpdu-block]
[edit ethernet-switching-options bpdu-block] | For interfaces configured for BPDU protection, specify the amount of time an interface receiving BPDUs
is disabled.
Configure the timeout value to periodically check to see if an interface is still disabled with BPDU
blocking. If this option is not configured, the interface is not periodically checked and remains disab... | [
{
"name": "seconds",
"desc": "—Amount of time, in seconds, the interface receiving BPDUs is disabled. Once the timeout"
}
] | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
system—To view this statement in the configuration.
system-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 9.1. | [
"Understanding BPDU Protection for Spanning-Tree Instance Interfaces",
"Understanding BPDU Protection for STP, RSTP, and MSTP",
"Configuring BPDU Protection for Individual Spanning-Tree Instance Interfaces",
"Example: Faster Convergence and Improved Network Stability with RSTP on EX Series Switches",
"Examp... |
disable-timeout (Port Error Disable) | disable-timeout timeout; | [edit ethernet-switching-options port-error-disable] | Specify how long Ethernet switching interfaces remain in a disabled state due to MAC limiting, MAC
move limiting, or storm control errors.
NOTE: If you modify an existing timeout value, the new timeout value does not affect
currently disabled interfaces are configured for automatic recovery. The new timeout
value appli... | [
{
"name": "timeout",
"desc": "Time, in seconds, that an interface remains disabled. The disabled interface automatically"
}
] | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 11.1. | [
"Understanding MAC Limiting and MAC Move Limiting for Port Security",
"Understanding Storm Control",
"Example: Using Storm Control to Prevent Network Outages (non-ELS)",
"Example: Using Storm Control to Prevent Network Outages",
"action-shutdown"
] |
disable-timeout | disable-timeout timeout; | [edit ethernet-switching-options port-error-disable] | Specify how long the Ethernet switching interfaces remain in a disabled state because of MAC limiting,
MAC move limiting, or storm control errors.
NOTE: If you modify the timeout value of an existing disable timeout setting, the new
timeout value does not impact the timing of restoration to service of currently disable... | [
{
"name": "timeout",
"desc": "Time, in seconds, that the disabled state remains in effect. The disabled interface is"
}
] | system—To view this statement in the configuration.
system-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 9.6. | [
"Configuring Autorecovery for Port Security Events",
"Configuring Autorecovery for Port Security Events"
] |
discard (Forwarding Class) | discard; | [edit class-of-service forwarding-policy next-hop-map map-name forwarding-class class-name] | Discard traffic sent to this forwarding class for the next-hop map referenced by this forwarding policy. | [] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 9.1. | [
"Configuring CoS-Based Forwarding"
] |
discard (forwarding-options) | discard {
prefix-list-name prefix-list-name;
source-ip-address-list address-list-name;
source-mac-address-list address-list-name;
} | [edit forwarding-options access-security router-advertisement-guard policy policy-name] | Configure a discard policy for an IPv6 Router Advertisement (RA) guard policy. RA guard protects against
rogue RA messages generated either maliciously or unintentionally by unauthorized or improperly
configured routers connecting to the network segment. An RA guard policy is used to validate incoming
RA messages on th... | [] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 15.1X53-D55. | [
"Understanding IPv6 Router Advertisement Guard",
"Configuring Stateful IPv6 Router Advertisement Guard"
] |
discard (routing-options) | discard; | [edit logical-systems logical-system-name routing-instances routing-instance-name routing-
options (aggregate | generate) (defaults | route)],
[edit logical-systems logical-system-name routing-instances routing-instance-name routing-
options rib routing-table-name (aggregate | generate) (defaults | route)],
[edit logic... | Do not forward packets addressed to this destination. Instead, drop the packets, do not send ICMP
unreachable messages to the packets’ originators, and install a reject route for this destination into the
routing table.
To propagate static routes into the routing protocols, include the discard statement when you define... | [] | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 7.4. | [
"Example: Summarizing Static Routes Through Route Aggregation"
] |
discard-action-for-unresolved-redir-addr | discard-action-for-unresolved-redir-addr; | [edit routing-instances name routing-options flow],
[edit routing-options flow] | Configure the discard action for BGP flow specification routes that were not resolved using the redirect
to IP action. If you do not configure this option, then Junos OS by default accepts the unresolved
redirect to IP addresses. | [] | routing | Statement introduced in Junos OS Release 18.4R1. | [
"Configuring BGP Flow Specification Action Redirect to IP to Filter DDoS Traffic",
"Understanding BGP Flow Routes for Traffic Filtering"
] |
disconnect-peer-timeout | disconnect-peer-timeout seconds; | [edit access diameter peer peer-name] | Configure the amount of time to wait in the Closing state while disconnecting this peer. | [
{
"name": "seconds",
"desc": "Amount of time to wait in the Closing state. Range: 1 through 65,535 seconds Default: 10 seconds"
}
] | access—To view this statement in the configuration.
access-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 17.1. | [] |
disk-failure-action | disk-failure-action (halt | reboot); | [edit chassis redundancy on-disk-failure],
[edit chassis routing-engine on-disk-failure] | Configure the Routing Engine to halt or reboot when the Routing Engine hard disk fails. | [
{
"name": "halt",
"desc": "Specify the Routing Engine to halt."
},
{
"name": "reboot",
"desc": "Specify the Routing Engine to reboot."
}
] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 9.2. | [
"Enabling a Routing Engine to Reboot on Hard Disk Errors",
"Installing Software on an EX Series Switch with Redundant Routing Engines (CLI Procedure)",
"High Availability Features for EX Series Switches Overview"
] |
disk-partition | disk-partition partition-name (/config |/var) {
level state (full | high) {
free-space threshold-value (mb | percent);
}
} | [edit chassis] | Configure the disk usage monitoring level. When the specified disk usage monitoring level is reached, a
system alarm is activated.
To view the partition size and the current unused space, use the show system storage partitions command.
To clear disk space, use the request system storage cleanup command.
The remaining s... | [
{
"name": "partition-name",
"desc": "Select the partition to be monitored for disk usage."
},
{
"name": "/config",
"desc": "Monitor the /config partition for disk usage."
},
{
"name": "/var",
"desc": "Monitor the /var partition for disk usage."
}
] | system—To view this statement in the configuration.
system-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 12.3. | [] |
display-host (Security Fallback Block) | display-host; | [edit security utm default-configuration]
[edit security utm feature-profile anti-virus juniper-express-engine profile profile-name
notification-options fallback-block]
[edit security utm feature-profile anti-virus kaspersky-lab-engine profile profile-name
notification-options fallback-block]
[edit security utm featu... | 15.1X49-D10
The Express and Kaspersky antivirus feature is not supported from Junos OS Release 15.1X49-
D10 onwards. | [] | security—To view this statement in the configuration.
security-control—To add this statement to the configuration. | The Express and Kaspersky antivirus feature is not supported from Junos OS Release 15.1X49-D10
onwards. For previous releases, statement introduced in Junos OS Release 9.5. Support for Sophos
engine added in Junos OS Release 11.1.
The [edit security utm default-configuration] hierarchy level is introduced in Junos OS R... | [] |
display-host (Security Virus Detection) | display-host; | [edit security utm default-configuration]
[edit security utm feature-profile anti-virus profile profile name notification-options virus-
detection] | Display the computer host name in the notification e-mail sent to the administrator when a virus is
detected by Sophos antivirus. | [] | security—To view this statement in the configuration.
security-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 11.1.
The [edit security utm default-configuration] hierarchy level is introduced in Junos OS Release 18.2R1. | [] |
distinguished-name (Access) | distinguished-name distinguished-name; | [edit access ldap-options search admin-search],
[edit access profile profile-name ldap-options search admin-search] | Specify the distinguished name of an administrative user. The distinguished name is used in the bind for
performing the LDAP search. | [
{
"name": "distinguished-name",
"desc": "Set of properties that define the user. For example, cn=admin, ou=eng, o=juniper,"
}
] | secret—To view this statement in the configuration.
secret-control—To add this statement to the configuration. | Statement introduced in Release 8.5 of Junos OS. | [
"Example: Configuring RADIUS and LDAP User Authentication"
] |
distinguished-name (Security) | distinguished-name <container container-string> <wildcard wildcard-string> | [edit security ike gateway gateway-name dynamic] | Specify a distinguished name as the identifier for the remote gateway with a dynamic IP address. | [
{
"name": "container-string",
"desc": "DN field and value to be matched. For example, cn=admin, ou=eng, o=example, dc=net. Specify one or more distinguished name (DN) field and value pairs that must match the DN in the VPN peer’s digital certificate. The order of the fields and their values must exactly mat... | security—To view this statement in the configuration.
security-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 8.5. | [
"IPsec Overview"
] |
distinguished-name | distinguished-name container container-string-values |wildcard wildcard-string-values | [edit services ipsec-vpn ike policy policy-name (local-id|remote-id)] | Specify one or more distinguished name values.
A distinguished name is a name used with digital certificates to uniquely identify a user. For example a
distinguished name can be:
•
CN=user
•
DC=example
•
DC=com
Optionally, you can use the container keyword to specify that the order of the fields in a DN and their
value... | [
{
"name": "container container-string-values",
"desc": "One or more distinguished name container string."
},
{
"name": "wildcard wildcard-string-values",
"desc": "One or more distinguished name wildcard string."
}
] | admin—To view this statement in the configuration.
admin-control—To add this statement to the configuration. | distinguished-name option added in Junos OS Release 19.1. | [
"Configuring IKE Policies"
] |
distributed (IGMP) | distributed; | [edit protocols igmp interface interface-name],
[edit dynamic-profiles protocols igmp interface $junos-interface-name] | Enable distributed IGMP by moving IGMP processing from the Routing Engine to the Packet Forwarding
Engine. Distributed IGMP reduces the join and leave latency of IGMP memberships.
Distributed IGMP is only available when chassis network-services enhanced-ip is configured.
NOTE: When you enable distributed IGMP, the foll... | [] | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 14.1X50.
Support added in Junos OS Release 18.2R1 for using distributed IGMP in conjunction with Multipoint
LDP (mLDP) in-band signalling. | [
"Enabling Distributed IGMP",
"Configuring Dynamic DHCP Client Access to a Multicast Network",
"Junos OS Multicast Protocols User Guide"
] |
distributed-dr | distributed-dr; | [edit dynamic-profiles name protocols pim interface (Protocols PIM) interface-name],
[edit logical-systems name protocols pim interface (Protocols PIM) interface-name],
[edit logical-systems name routing-instances name protocols pim interface (Protocols PIM) interface-
name],
[edit protocols pim interface (Protocols ... | Enable PIM distributed designated router (DR) functionality on IRB interfaces associated with EVPN
virtual LANs (VLANs) that have been configured with IGMP snooping or MLD snooping. By effectively
disabling certain PIM features that are not required in this scenario, this statement supports using PIM
to perform intersu... | [] | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 17.2R1. | [
"Configure Multicast Forwarding with IGMP Snooping in an EVPN-MPLS Environment",
"Configure Multicast Forwarding with MLD Snooping in an EVPN-MPLS Environment",
"Example: Preserving Bandwidth with IGMP Snooping in an EVPN-VXLAN Environment"
] |
distribution-ip (Security SIP) | distribution-ip ip-address {
distribute-to {
fpc fpc-slot {
pic pic-slot;
}
}
} | [edit security alg sip] | The distribution-ip configuration statement allows you to configure maximum of up to 20 IPv4 or IPv6
distribution IP addresses that enable SIP ALG to distribute the traffic based on the available IP
addresses. Use the optional fpc and pic commands to add Flexible PIC Concentrator (FPC) card numbers
and PIC card numbers... | [
{
"name": "fpc",
"desc": "Flexible PIC Concentrator (FPC) card number."
},
{
"name": "fpc-slot",
"desc": "FPC slot number. Range: 0 through 127"
},
{
"name": "pic",
"desc": "PIC card number."
},
{
"name": "pic-slot",
"desc": "PIC slot number. Range: 0 through 3"
}
] | system—To view this statement in the configuration.
system-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 18.1R1. | [
"Understanding the SIP ALG"
] |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.