command stringlengths 2 75 | syntax stringlengths 0 289k | hierarchy_level stringlengths 0 6.91k | description stringlengths 0 45.2k | options listlengths 0 499 | required_privilege_level stringlengths 0 330k | release_information stringlengths 0 3.14k | related_documentation listlengths 0 22 |
|---|---|---|---|---|---|---|---|
policy (Security Interfaces) | policy ike-peer-address {
description policy-description;
encoding (binary | pem);
identity identity-name;
local-certificate certificate-filename;
local-key-pair private-public-key-file;
mode (aggressive | main);
pre-shared-key (ascii-text key | hexadecimal key);
proposals [ proposal-nam... | [edit security ike] | Define an IKE policy. | [
{
"name": "ike-peer-address",
"desc": "A tunnel address configured at the [edit interfaces es] hierarchy level."
}
] | admin—To view this statement in the configuration.
admin-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 7.4. | [
"Configuring an IKE Policy for Preshared Keys",
"Configuring an IKE Policy for Digital Certificates for an ES PIC"
] |
policy (Security IPsec Interfaces) | policy ipsec-policy-name {
description description;
perfect-forward-secrecy {
keys (group1 | group 14 | group2 | group 5);
}
proposals [ proposal-names ];
} | [edit security ipsec] | Define an IPsec policy. | [
{
"name": "ipsec-policy-name",
"desc": "Specify an IPsec policy name."
}
] | security—To view this statement in the configuration.
security-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 7.4. | [
"Configuring the IPsec Policy for an ES PIC"
] |
policy (Security IPsec) | policy policy-name {
description description;
perfect-forward-secrecy keys (group1 | group14 | group19 | group2 | group20 | group24 |
group5 | group15 | group16 | group21);
proposal-set (basic | compatible | prime-128 | prime-256 | standard | suiteb-gcm-128 |
suiteb-gcm-256);
proposals proposal-name;
... | [edit security ipsec] | Define an IPsec policy. An IPsec policy defines a combination of security parameters (IPsec proposals)
used during IPsec negotiation. It defines Perfect Forward Secrecy (PFS) and the proposals needed for
the connection. | [
{
"name": "name",
"desc": "Name of the IPsec policy."
},
{
"name": "description",
"desc": "Enter descriptive text for an IPsec policy."
},
{
"name": "perfect-forward-",
"desc": ""
},
{
"name": "secrecy keys",
"desc": "Specify Perfect Forward Secrecy (PFS) as the method th... | security—To view this statement in the configuration.
security-control—To add this statement to the configuration. | Statement modified in Junos OS Release 8.5.
Support for group 14 is added in Junos OS Release 11.1.
Support for group14 options added in Junos OS Release 11.1.
Support for group19, group20, and group24 options added in Junos OS Release 12.1X45-D10.
group15, group16, and group21 options introduced in Junos OS Release 1... | [
"IPsec Overview",
"Installing Junos IKE package"
] |
policy (Security Policies) | policy policy-name {
description description;
match {
application {
[application];
any;
}
destination-address {
[address];
any;
any-ipv4;
any-ip... | [edit security policies from-zone zone-name to-zone zone-name] | Define a security policy. | [
{
"name": "policy-name",
"desc": "Name of the security policy."
},
{
"name": "description",
"desc": "Descriptive text about the security policy. Range: 1 through 900 characters The descriptive text should not include characters “<”, “>”, “&”, or “\\n”. The upper limit of the description text ran... | security—To view this statement in the configuration.
security-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 8.5. The services-offload option added in Junos OS Release
11.4. Statement updated with the source-identity option and the description option added in Junos OS
Release 12.1. Support for the user-firewall option added in Junos OS Release 12.1X45-D10. Support for
the initial-tcp-m... | [
"Configuring SSL Forward Proxy",
"Security Policies Overview"
] |
policy (Services CoS Next Gen Services) | policy policy-name {
match {
application [ application-names ];
destination-address address;
destination-address-range low minimum-value high maximum-value;
destination-port port-number;
destination-prefix-list list-name;
source-address address;
source-address... | [edit services cos rule rule-name] | Configure a policy in a services CoS rule. The policy specifies Differentiated Services (DiffServ) code
point (DSCP) marking and forwarding-class assignment for packets that are processed by a service set.
The policy identifies the matching conditions for packet source and destination addresses and for packet
applicati... | [
{
"name": "policy-name",
"desc": "Name of the policy."
}
] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 19.3R2. | [
"Class of Service for Services PICs (Next Gen Services)"
] |
policy (Services IKE) | policy policy-name {
description description;
local-certificate identifier;
local-id (ipv4_addr ipv4-address | ipv6-addr ipv6-address | key-id identifier);
version (1 | 2);
mode (aggressive | main);
pre-shared-key (ascii-text key | hexadecimal key);
proposals [ proposal-names ];
remote-i... | [edit services ipsec-vpn ike] | Define an IKE policy. | [
{
"name": "policy-name",
"desc": "IKE policy name."
}
] | admin—To view this statement in the configuration.
admin-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 7.4. | [
"Configuring IKE Policies"
] |
policy (SSM Maps) | policy [ policy-names ]; | [edit logical-systems logical-system-name routing-instances routing-instance-name routing-
options multicast ssm-map ssm-map-name],
[edit logical-systems logical-system-name routing-options multicast ssm-map ssm-map-name],
[edit routing-instances routing-instance-name routing-options multicast ssm-map ssm-map-name],
[e... | Apply one or more policies to an SSM map. | [
{
"name": "policy-names",
"desc": "Name of one or more policies for SSM mapping."
}
] | routing—To view this statement in the configuration.
routing-control—To view this statement in the configuration. | Statement introduced in Junos OS Release 7.4. | [
"Example: Configuring SSM Mapping"
] |
policy (Stateful Firewall Rules Next Gen Services) | policy policy-name {
match {
application [application-name];
destination-address (address | any);
destination-address-excluded address;
source-address (address | any);
source-address-excluded address;
}
then {
count;
deny;
permit;
rejec... | [edit services policies stateful-firewall-rule rule-name] | Configure one or more policies in a stateful firewall rule. Each policy identifies the matching conditions
for a flow, and whether or not to allow the flow. Once a policy in the rule matches a flow, that policy is
applied and no other policies in the rule are processed. | [
{
"name": "policy-name",
"desc": "Name of the policy."
}
] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 19.3R2. | [
"Configuring Stateful Firewalls for Next Gen Services"
] |
policy (Subscriber Secure Policy) | policy policy-name {
inet {
drop-policy rule-name {
from {
apply-groups group-name;
apply-groups-except group-name;
destination-address address;
destination-port port-number;
dscp dscp-value;
protocol... | [edit services radius-flow-tap] | Specify the policy that is applied to mirrored packets sent to a mediation device. | [
{
"name": "policy-name",
"desc": "Name of the policy from which to drop traffic."
}
] | flow-tap—To view this statement in the configuration.
flow-tap-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 12.3. | [
"Subscriber Secure Policy Overview",
"Configuring RADIUS-Initiated Subscriber Secure Policy Mirroring Overview"
] |
policy (System Security Profile) | policy {
maximum maximum;
reserved reserved;
} | [edit system security-profile] | Specify the number of security policies that user logical system administrators and primary logical
system administrators can configure for their logical systems if the security profile is bound to the logical
systems.
The primary administrator:
•
uses security profiles to provision logical systems with resources.
•
bi... | [
{
"name": "maximum",
"desc": "A maximum allowed quota. If a logical system requires more of a resource than its reserved amount allows, it can utilize resources configured for the global maximum amount if they are"
},
{
"name": "available",
"desc": "that is, if they are not allocated to other lo... | system—To view this statement in the configuration.
system-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 11.2. | [
"Understanding Logical Systems for SRX Series Services Gateways"
] |
policy | policy policy-name {
accept (Router Advertisement Guard Policy) {
match-list {
match-criteria {
(match-all | match-any);
}
prefix-list-name prefix-list-name;
source-ip-address-list address-list-name;
source-mac-address-list address-... | [edit forwarding-options access-security router-advertisement-guard],
[edit forwarding-options access-security router-advertisement-guard interface interface-name],
[edit forwarding-options access-security router-advertisement-guard vlans (vlan-name| all)] | Configure the policy for an IPv6 Router Advertisement (RA) guard. RA guard protects against rogue RA
messages generated either maliciously or unintentionally by unauthorized or improperly configured
routers connecting to the network segment. An RA guard policy is used to validate incoming RA
messages based on whether t... | [] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 15.1X53-D55. | [
"Understanding IPv6 Router Advertisement Guard",
"Configuring Stateful IPv6 Router Advertisement Guard"
] |
policy-based-logging (LRF Profile) | policy-based-logging; | [edit services lrf profile profile-name] | Configure policy-based logging, which causes the LRF rules to be activated by PCC rules. | [] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 17.1.
Support for Next Gen Services introduced in Junos OS Release 19.3R1 on MX Series. | [
"Configuring an LRF Profile for Subscribers",
"Configuring Logging and Reporting for Junos OS Subscriber Aware",
"Configuring Logging and Reporting for Subscriber Management"
] |
policy-db-size | policy-db-size size; | [edit chassis fpc slot-number pic pic-number adaptive-services service-package extension-
provider] | Configure the size of the policy database. When this setting is changed, the PIC reboots.
NOTE: At least one data core must be configured to configure the size of the policy
database. | [
{
"name": "size",
"desc": "Size of the policy database, in megabytes (MB). The size of the forwarding database and the size of"
}
] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 9.3. | [] |
policy-decision-statistics-profile | policy-decision-statistics-profile profile-name {
aacl-fields {
field-name;
}
file filename;
files file-number;
size bytes;
} | [edit accounting-options],
[edit services service-set service-set-name] | Create a policy decision statistics profile, which configures the files to which statistics records are
exported and the format that is exported. | [
{
"name": "file filename",
"desc": "Use the specified file to receive the accounting-data output. Enclose the name within"
},
{
"name": "files number",
"desc": "(Optional) Use the specified maximum number of accounting files."
},
{
"name": "profile-name",
"desc": "Name of the policy ... | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 9.5. | [
"Network Management and Monitoring Guide",
"Configuring Statistics Profiles"
] |
policy-lookup-cache | (policy-lookup-cache | no-policy-lookup-cache); | [edit security idp sensor-configuration global] | Enable cache to accelerate IDP policy lookup which improves IDP performance.
Default
policy-lookup-cache is enabled by default. | [] | security—To view this statement in the configuration.
security-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 9.2. | [] |
policy-map (Class of Service) | policy-map policy-map-name {
inet-precedence proto-ip code-point [alias | bits];
inet-precedence proto-mpls code-point [alias | bits];
inet-precedence proto-all code-point [alias | bits];
inet6-precedence proto-ip code-point [alias | bits];
inet6-precedence proto-mpls code-point [alias | bits];
... | [edit class-of-service] | Define the packet-marking scheme (rewrite rules) for a customer. Traditionally, packet marking in Junos
uses the forwarding class and loss priority determined from a behavior aggregate (BA) classifier or
multifield classifier. This approach does not allow rewrite rules to be directly assigned for each customer
because ... | [
{
"name": "alias",
"desc": "The predefined CoS code point alias on the device."
},
{
"name": "bits",
"desc": "The bit pattern for the CoS code point."
}
] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 16.1R1.
inet6-precedence options added in Junos OS Release 24.2R1.
Refer to Feature Explorer for platform and release support information. | [] |
policy-map-marking | policy-map-marking; | [edit class-of-service interfaces interface-name unit logical-unit-number] | Enable policy maps on a logical interface. | [] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Evolved Release 24.4R1. | [
"Assigning Rewrite Rules on a Per-Customer Basis Using Policy Maps"
] |
policy-match | policy match {
duration interval;
size count;
threshold value;
} | [edit security alarms potential-violation policy] | Configure alarms for a policy rule or a group of rule violations within a specified time period. | [
{
"name": "duration interval",
"desc": "Indicate the duration of counters."
},
{
"name": "size count",
"desc": "Indicate the number of policies for which policy violation checks can be done"
},
{
"name": "threshold value",
"desc": "Indicate the number of policies for which policy vio... | security—To view this statement in the configuration.
security-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 11.2. | [
"Security Policies Overview"
] |
policy-multipath | policy-multipath policy [ policy }
traceoptions <file filename <files files> <size size> <(world-readable | no-world-
readable)>> name detail disable receive send
} | [edit logical-systems name routing-instances name routing-options rib],
[edit logical-systems name routing-options rib],
[edit logical-systems name tenants name routing-instances name routing-options rib],
[edit routing-instances name routing-options rib],
[edit routing-options rib],
[edit tenants name routing-instance... | CAUTION: Enabling tracing can adversely impact scale and performance and may
increase security risk. We strongly recommend using the trace, tracing, or traceoptions
commands only under the guidance of a JTAC support engineer. After collecting the
debug information, immediately disable tracing to minimize risk and rest... | [
{
"name": "policy",
"desc": "Import policy to create policy-based multipath. NOTE: This statement is supported only at the [edit routing-option policy-multipath] hierarchy level. Any action commands configured in the policy, such as apply, is evaluated using the active route. For non-active routes, the poli... | routing | Statement introduced in Junos OS Release 19.1R1. | [
"Policy-Based Multipath Routes Overview"
] |
policy-oids | policy-oids [ oid ]; | [edit services ipsec-vpn ike policy policy-name certificate] | Configure policy object identifiers (OIDs). This configuration is optional. | [
{
"name": "oid",
"desc": "Policy OID contained in a peer’s certificate or certificate chain. Up to five policy OIDs can be configured. Each OID can be up to 63 bytes long. NOTE: You must ensure that at least one of the configured policy OIDs is included in a peer’s certificate or certificate chain. Note tha... | view-level—To view this statement in the configuration.
control-level—To add this statement to the configuration. | Statement introduced in Junos OS Release 16.1. | [
"Understanding Digital Certificate Validation",
"Example: Improving Digital Certificate Validation by Configuring Policy OIDs on an MX Series Device"
] |
policy-options (Dynamic Profiles) | policy-options {
prefix-list uid {
ip-addresses;
dynamic-db;
}
} | [edit dynamic-profiles profile-name] | Define a list of IPv4 or IPv6 address prefixes for use in a dynamic firewall filter or in an HTTP redirect
configuration.
You can configure up to 85,325 prefixes in each prefix list. To configure more than 85,325 prefixes,
configure multiple prefix lists and apply them to multiple firewall filter terms.
You can configu... | [
{
"name": "uid",
"desc": "Unique identifier of the prefix list. You must assign a UID as the prefix list name."
},
{
"name": "ip-addresses",
"desc": "List of IPv4 or IPv6 address prefixes, one IP address per line in the configuration."
},
{
"name": "dynamic-db",
"desc": "Specify that... | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 11.4. | [
"Example: Using Routing Policy in an ISP Network"
] |
policy-options (QFX) | policy-options
application-maps application-map-name {
application application-name {
code-points [ aliases ] [ bit-patterns ];
}
}
policy-statement policy-name {
term term-name {
from {
family family-name;
match-conditions;
... | [edit] | Configure options such as application maps for DCBX application protocol exchange and policy
statements. | [] | storage—To view this statement in the configuration.
storage-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 12.1. | [
"Defining an Application for DCBX Application Protocol TLV Exchange",
"Example: Configuring DCBX Application Protocol TLV Exchange",
"Example: Configuring DCBX to Support an iSCSI Application",
"Understanding DCBX Application Protocol TLV Exchange",
"Understanding DCBX Application Protocol TLV Exchange on E... |
policy-options | policy-options {
as-list-group group-name {
as-list name members [as-start-as-finish., as, as-start-as-finish];
}
as-path name regular-expression;
as-path-group group-name;
community name {
invert-match;
members [ community-ids ];
}
condition condition-name {
i... | [edit],
[edit dynamic-profiles profile-name] | Configure routing policy.
The remaining statements are explained separately. See CLI Explorer. | [] | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 7.4.
Support at the [edit dynamic-profiles] hierarchy level introduced in Junos OS Release 11.4.
as-path-neighbors, as-path-origins, and as-path-transits statements introduced in Junos OS release 21.3R1. | [
"Example: Using Routing Policy in an ISP Network"
] |
policy-rematch | policy-rematch <extensive>; | [edit security policies] | Enable the device to reevaluate an active session when its associated security policy is modified. The
session remains open if it still matches the policy that allowed the session initially.
The session is closed if its associated policy is renamed, deactivated, or deleted. However, you can use
the extensive option to ... | [
{
"name": "extensive",
"desc": "When a policy is modified or deleted, extensive option checks if any suitable policy permit to keep these sessions alive. This check is done through a fully new policy lookup for the session to see if any policy can still permit it. NOTE: The extensive option does not apply t... | security—To view this statement in the configuration.
security-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 8.5. Support for the extensive option added in Junos OS
Release 15.1X49-D20. | [
"Security Policies Overview",
"Unified Policies Configuration Overview"
] |
policy-set | policy-set policy-set-name {
policy policy-name {
match {
source-address any;
destination-address any;
application any;
from-zone trust
to-zone untrust;
}
... | [edit security policies] | Specify policy that applies for the inner session created by VXLAN inner header | [
{
"name": "source-address",
"desc": "Source address of the traffic as matching criteria. You can specify one or more IP addresses, address sets, or wildcard addresses."
},
{
"name": "destination-address",
"desc": "Destination address of the traffic as matching criteria. You can specify one or mo... | security—To view this statement in the configuration.
security-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 20.1R1. | [] |
policy-statement | The policy statement configuration can be used without terms. An example configuration is as below.
policy-statement policy-name from <match-condition> then <action> | [edit dynamic-profiles profile-name policy-options],
[edit logical-systems logical-system-name policy-options],
[edit policy-options] | Define a routing policy, including subroutine policies.
A term is a named structure in which match conditions and actions are defined. Routing policies are
made up of one or more terms. Each routing policy term is identified by a term name. The name can
contain letters, numbers, and hyphens (-) and can be up to 255 cha... | [
{
"name": "actions",
"desc": "(Optional) One or more actions to take if the conditions match. The actions are described in"
},
{
"name": "family family-name",
"desc": "(Optional) Specify an address family protocol. Specify inet for IPv4. Specify inet6 for"
},
{
"name": "from",
"desc"... | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 7.4.
Support for configuration in the dynamic database introduced in Junos OS Release 9.5.
Support for configuration in the dynamic database introduced in Junos OS Release 9.5 for EX Series
switches.
inet-mdt option introduced in Junos OS Release 10.0R2.
route-target option ... | [
"dynamic-db",
"Understanding Source Packet Routing in Networking (SPRING)"
] |
policy-stats | policy-stats {
system-wide (disable | enable) ;
} | [edit security policies] | Configure systemwide policies statistics. The systemwide policies statistics are disabled by default. | [
{
"name": "disable",
"desc": "Disable systemwide policy statistics."
},
{
"name": "enable",
"desc": "Enable systemwide policy statistics."
}
] | security—To view this statement in the configuration.
security-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 12.1X46-D10. | [] |
policy-with-count | policy-with-count {
maximum maximum;
reserved reserved;
} | [edit system security-profile] | Specify the number of security policies with a count that user logical system administrators and primary
logical system administrators can configure for their logical systems if the security profile is bound to the
logical systems.
The primary administrator:
•
uses security profiles to provision logical systems with re... | [
{
"name": "maximum",
"desc": "A maximum allowed quota. If a logical system requires more of a resource than its reserved amount allows, it can utilize resources configured for the global maximum amount if they are"
},
{
"name": "available",
"desc": "that is, if they are not allocated to other lo... | system—To view this statement in the configuration.
system-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 11.2. | [
"Understanding Logical Systems for SRX Series Services Gateways"
] |
polling-interval (Network Management) | polling-interval polling-interval | [edit system packet-forwarding-options hw-resource-monitor] | Configure a single polling interval for all hardware resources. The same polling interval is used for all the
resources. | [
{
"name": "polling-interval",
"desc": "Range: 10 through 86400000 milliseconds Default: 1 second. This is an optional configuration."
}
] | Edit | Statement introduced in Junos OS Release 24.2R1. | [
"No Link Title"
] |
polling-interval | polling-interval seconds; | [edit protocols sflow],
[edit protocols sflow interfaces interface-name] | Configure the interval (in seconds) that the device waits between port statistics update messages.
Polling refers to the device successively gathering various statistics for the network interfaces
configured for sFlow monitoring and exporting the statistics to the configured sFlow collector.
Default
If no polling inter... | [
{
"name": "seconds",
"desc": "Number of seconds between successive samples of interface statistics. Specifying a value of 0"
}
] | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 9.3. | [
"Configuring sFlow Technology for Network Monitoring (CLI Procedure)",
"Example: Monitoring Network Traffic Using sFlow Technology",
"Example: Configuring sFlow Technology to Monitor Network Traffic on EX Series Switches",
"Example: Configuring sFlow Technology to Monitor Network Traffic on MX Series Routers"... |
pon (Access-Line Rate Adjustment) | pon {
gpon {
overhead-adjust percent;
overhead-bytes bytes;
total-adjust percent;
}
other {
overhead-adjust percent;
overhead-bytes bytes;
total-adjust percent;
}
twdm-pon {
overhead-adjust percent;
overhead-bytes bytes;
total-a... | [edit system access-line] | Configure adjustments to actual PON data rates as follows:
•
Multiply the actual data rate by a percentage for only downstream rates or for both upstream an
downstream rates
•
Adjust the encapsulation overhead by adding to or subtracting from the total cell or frame bytes a
specified number of bytes
The actual (unadjus... | [
{
"name": "gpon",
"desc": "Sets attributes for GPON access lines."
},
{
"name": "other",
"desc": "Sets attributes for access lines of type OTHER. This might used, for example, when an OLT uses a new PON type that is not yet formally supported by the Broadband Forum."
},
{
"name": "overhe... | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 19.3R1. | [
"ANCP Agent Traffic Shaping and CoS",
"ANCP Agent Traffic Shaping and CoS",
"ANCP Agent Traffic Shaping and CoS",
"ANCP Agent Traffic Shaping and CoS",
"ANCP Agent Neighbors and Operations"
] |
pool (Access) | pool pool-name {
family {
inet {
dhcp-attributes {
boot-file boot file name;
boot-server boot server name;
domain-name domain name;
grace-period seconds;
maximum-lease-time (seconds | infinite);
name-... | [edit access address-assignment] | Configure the name of an address assignment pool. The remaining statements are explained separately. | [
{
"name": "pool-name",
"desc": "Name assigned to the address-assignment pool."
}
] | access—To view this statement in the configuration.
access-control—To add this statement to the configuration. | Statement introduced in Release 10.4 of Junos OS. | [
"Firewall User Authentication Overview",
"Obtaining Username and Role Information Through Firewall Authentication"
] |
pool (Address-Assignment Pools) | pool pool-name {
active-drain;
family family {
dhcp-attributes {
[ protocol-specific attributes ]
}
excluded-address ip-address;
excluded-range name low minimum-value high maximum-value;
host hostname {
hardware-address mac-address;
ip-... | [edit access address-assignment]
[edit routing-instances routing-instances-name access address-assignment] | Configure the name of an address-assignment pool.
NOTE: Subordinate statement support depends on the platform. See individual
statement topics for more detailed support information. | [
{
"name": "pool-name",
"desc": "Name assigned to the address-assignment pool."
},
{
"name": "active-drain",
"desc": "Configure the DHCP local server to stop allocating addresses from this pool. When this is configured, the DHCP local server gracefully shifts clients from this address pool to an ... | admin—To view this statement in the configuration.
admin-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 9.0.
Support at the [edit routing-instances routing-instances-name access address-assignment] hierarchy level at
tenant system level introduced in Junos OS Release 20.2R1. | [
"Address-Assignment Pools for Subscriber Management",
"DHCP Client Attribute and Address Assignment"
] |
pool (Destination NAT Next Gen Services) | pool nat-pool-name{
address address-prefix;
} | [edit services nat destination] | Configure a set of addresses used for Network Address Translation (NAT) of destination addresses. | [
{
"name": "nat-pool-name",
"desc": "Name of the NAT pool. If you are configuring twice NAT, do not use the same name that you use for the source pool."
}
] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 19.3R2. | [] |
pool (DHCP Local Server Overrides) | pool pool-name; | [edit logical-systems logical-system-name routing-instances routing-instance-name system
services dhcp-local-server overrides process-inform],
[edit logical-systems logical-system-name routing-instances routing-instance-name system
services dhcp-local-server dhcpv6 overrides process-inform],
[edit logical-systems log... | Configure DHCP or DHCPv6 local server to reply to DHCP information request messages
(DHCPINFORM for DHCPv4 and INFORMATION-REQUEST for DHCPv6) with information taken from
the specified pool without interacting with AAA. | [
{
"name": "pool-name",
"desc": "Name of the address pool, which must be configured within family inet for DHCP local server and within family inet6 for DHCPv6 local server."
}
] | system—To view this statement in the configuration.
system-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 11.4. | [
"Enabling Processing of Client Information Requests",
"Overriding the Default DHCP Local Server Configuration Settings"
] |
pool (NAT Rule Next Gen Services) | pool nat-pool-name; | [edit services nat destination rule-set rule-set rule rule-name then source-nat],
[edit services nat source rule-set rule-set rule rule-name then source-nat] | Specify the name of the NAT pool that contains the addresses or subnets to which addresses are
translated. | [] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 19.3R2. | [] |
pool (NAT) | pool nat-pool-name {
address ip-prefix</prefix-length>;
address-allocation round-robin;
address-range low minimum-value high maximum-value;
app- mapping-timeout app-mapping-timeout;
ei-mapping-timeout ei-mapping-timeout;
limit-ports-per-address number;
mapping-timeout mapping-timeout;
pg... | [edit services nat] | Specify the NAT name and properties. | [
{
"name": "nat-pool-name",
"desc": "Identifier for the NAT address pool."
}
] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 7.4.
pgcp statement added in Junos OS Release 8.4.
remotely-controlled and ports-per-session statements added in Junos OS Release 8.5.
hint statement added in Junos OS Release 9.0.
address-allocation statement added in Junos OS Release 11.2.
sequential statement introduced ... | [
"Configuring Pools of Addresses and Ports for Network Address Translation Overview"
] |
pool (Security Destination NAT) | pool pool-name {
address <ip-address> {
(port port-number | to ip-address);
}
description text;
routing-instance (routing-instance-name | default);
session-retain;
} | [edit security nat destination] | Define a destination NAT pool to identify the pool uniquely. | [
{
"name": "pool-name",
"desc": "Name of the pool."
},
{
"name": "description",
"desc": "Description of the pool."
},
{
"name": "session-retain",
"desc": "To support destination FQDN NAT session continue to use existing IP from DNS"
}
] | security—To view this statement in the configuration.
security-control—To add this statement to the configuration. | Statement modified in Junos OS Release 9.6. The description option added in Junos OS Release 12.1.
The session-retain option added in Junos OS Release 23.1R1. | [] |
pool (Security Source NAT Rule Set) | pool (pool-name) {
persistent-nat {
address-mapping;
inactivity-timeout seconds;
max-session-number number;
permit (any-remote-host | target-host | target-host-port);
}
} | [edit security nat source rule-set rule-set-name rule rule-name then source-nat] | Specify to use source NAT pool. | [
{
"name": "pool-name",
"desc": "Name of the source NAT pool."
}
] | security—To view this statement in the configuration.
security-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 9.6. | [] |
pool (Security Source NAT) | pool pool-name {
address ip-address {
to ip-address;
}
burst-pool burst-pool-name;
address-persistent subscriber ipv6-prefix-length prefix-length;
address-pooling (paired | no-paired);
address-shared;
description text;
host-address-base ip-address;
overflow-pool (interface ... | [edit security nat source] | Define a source NAT pool to identify the pool uniquely. | [
{
"name": "pool-name",
"desc": "Name of the pool."
},
{
"name": "description",
"desc": "Description of the pool."
},
{
"name": "enhanced-port-overloading-algorithm",
"desc": "The hash algorithm uses destination IP and port to calculate the port overloading index."
},
{
"name"... | security—To view this statement in the configuration.
security-control—To add this statement to the configuration. | Statement modified in Junos OS Release 9.6. The description option added in Junos OS Release 12.1.
Statement modified in Junos OS Release 12.1X45-D10. Statement modified in Junos OS Release
12.3X48-D10. The enhanced-port-overloading-algorithm and preserve-range option added in Junos OS Release
22.4R1.
The burst-pool an... | [] |
pool (Service Interface) | pool pool-name {
interface interface-name.unit-number;
} | [edit services service-interface-pools] | Configure a service interface pool for VPN aggregation for the BGF feature. | [
{
"name": "pool-name",
"desc": "Name of the service interface pool."
}
] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 9.3. | [
"Configuring Service Interface Pools"
] |
pool (Service Interfaces) | pool pool-name {
interface service-interface-name;
} | [edit services service-device-pools] | Define a pool of service interfaces that can be assigned to an L2TP tunnel group for traffic load-
balancing. The interfaces in the pool must be inline service interfaces (si). The service device pool is
required for dynamic LNS sessions. | [
{
"name": "pool-name",
"desc": "Name of the service interface pool. The remaining statement is explained separately. Search for a statement in CLI Explorer or click a linked statement in the Syntax section for details."
}
] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 11.4.
Support for ps service interfaces added in Junos OS Release 19.3R1. | [
"L2TP LNS Inline Service Interfaces"
] |
pool (Source NAT Next Gen Services) | pool nat-pool-name {
address address-prefix | address address-prefix to address address-prefix;
address-pooling {
}
ei-mapping-timeout ei-mapping-timeout;
host-address-base ip-address;
mapping-timeout mapping-timeout;
pool-utilization-alarm {
clear-threshold value;
raise-thre... | [edit services nat source] | Configure a set of addresses (or prefixes), address ranges, and ports used for Network Address
Translation (NAT) of source addresses. Port-overloading factor is configurable between 2 - 32. | [
{
"name": "nat-pool-name",
"desc": "Name of the NAT pool. If you are configuring twice NAT, do not use the same name that you use for the destination pool."
}
] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 19.3R2.
Statement introduced in Junos OS Release 25.4R1 on MX304, MX10004, and MX10008 (with LC9600
line card). | [] |
pool (System) | pool address/prefix-length {
address-range {
low address;
high address;
}
exclude-address {
address;
}
} | [edit system services dhcp] | For J Series Services Routers and EX Series switches only. Configure a pool of IP addresses for DHCP
clients on a subnet. When a client joins the network, the DHCP server dynamically allocates an IP
address from this pool. | [
{
"name": "address-range",
"desc": "Lowest and highest IP addresses in the pool that are available for dynamic address"
},
{
"name": "exclude-address",
"desc": "Addresses within the range that are not used for dynamic address assignment. You can"
}
] | system—To view this statement in the configuration.
system-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 7.4. | [] |
pool (TDF Domain) | pool pool-name; | [edit unified-edge gateways tdf gateway-name domains domain-name ip-subscriber subscriber-
address (inet | inet6)] | Specify the address pool that contains the source IP addresses for IP-based subscriber packets that
undergo TDF processing.
You can specify only one address pool. | [
{
"name": "pool-name",
"desc": "Name of the address pool. NOTE: The address pool must have been previously configured at the [edit access address-assignment] hierarchy level."
}
] | unified-edge—To view this statement in the configuration.
unified-edge-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 16.1. | [
"Configuring Address Pools for Source-IP Filtering of IP-Based Subscribers",
"Configuring a Set of IP-Based TDF Subscriber Properties with a TDF Domain",
"Understanding Source IP Filtering with Address Pools in TDF Domains for IP-Based Subscribers",
"Understanding the Definition of a Set of IP-Based Subscribe... |
pool | pool pool-name <priority priority>; | [edit interfaces br-pim/0/port dialer-options],
[edit interfaces umd0 dialer-options],
[edit interfaces dln unit logical-unit-number dialer-options],
[edit logical-systems logical-system-name interfaces dln unit logical-unit-number dialer-options] | On J Series Services Routers, for logical and physical ISDN interfaces, specify the dial pool. The dial pool
allows logical (dialer) and physical (br-pim/0/port) interfaces to be bound together dynamically on a per-
call basis. On a dialer interface, pool directs the dialer interface which dial pool to use. On br-pim/0... | [
{
"name": "pool-name",
"desc": "Pool identifier."
},
{
"name": "priority priority",
"desc": "(Physical br-pim/0/port interfaces only) Specify a priority value of 0 (lowest) to 255"
}
] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 7.4. | [] |
pool-default-port-range (Source NAT Next Gen Services) | pool-default-port-range port-low to port-high; | [edit services nat source] | Configure a global default port range for NAT pools that use port translation. This port range is used
when a NAT pool does not specify a port range and does not specify automatic port assignment. | [
{
"name": "port-low",
"desc": "The lower end of the port range."
},
{
"name": "port-high",
"desc": "The upper end of the port range. Range: 1024 through 65,535"
}
] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 19.3R2. | [] |
pool-default-port-range | pool-default-port-range lower-port-range to upper-port-range; | [edit security nat source] | Set the global default single port range for source NAT pools with port translation. If the port range in
source NAT pools is not specified, the configured default port range is used. If neither the port range in
source NAT pools nor the default port range are configured, the default single port range is 1024
through 6... | [
{
"name": "lower-port-range",
"desc": "Specify the lower limit of the port range."
},
{
"name": "upper-port-range",
"desc": "Specify the upper limit of the port range."
}
] | security—To view this statement in the configuration.
security-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 11.4. | [] |
pool-default-twin-port-range | pool-default-twin-port-range lower-port-range to upper-port-range; | [edit security nat source] | Specify the global default twin port range for all source pools. Two ports within range (63488, 65535)
are allocated at a time for RTP/RTCP applications such as SIP, H.323, and RTSP for source pools with
PAT.
The default twin port range is 2048. If you have an SRX5400, SRX5600, or SRX5800 device that
supports a maximum... | [
{
"name": "lower-twin-port-range",
"desc": "Specify the lower limit of the port range."
},
{
"name": "upper-twin-port-range",
"desc": "Specify the upper limit of the port range."
}
] | security—To view this statement in the configuration.
security-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 12.1X47-D10. | [
"Understanding Source NAT Pool Capacities"
] |
pool-match-order | pool-match-order {
external-authority;
ip-address-first;
option-82;
} | [edit logical-systems logical-system-name routing-instances routing-instance-name system
services dhcp-local-server],
[edit logical-systems logical-system-name system services dhcp-local-server],
[edit routing-instances routing-instance-name system services dhcp-local-server],
[edit system services dhcp-local-server] | Configure the order in which the DHCP local server uses information in the DHCP client PDU to
determine how to obtain an address for the client.
The remaining statements are explained separately. Search for a statement in CLI Explorer or click a
linked statement in the Syntax section for details.
Default
DHCP local se... | [] | system—To view this statement in the configuration.
system-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 9.0. | [
"Configuring How the Extended DHCP Local Server Determines Which Address-Assignment Pool to",
"Use",
"Understanding Differences Between Legacy DHCP and Extended DHCP"
] |
pool-utilization-alarm (Security Source NAT Pool) | pool-utilization-alarm (clear-threshold value | raise-threshold value); | [edit security nat source pool pool-name] | Define utilization alarm thresholds for a specific Network Address Translation (NAT) source pool. When
pool utilization exceeds the upper (raise) threshold or falls below the lower (clear) threshold, an SNMP
trap is triggered. Threshold settings that use this statement take precedence over thresholds that are set
using... | [
{
"name": "clear-threshold value",
"desc": "Lower threshold at which an SNMP trap is triggered. Range: 40 through 100."
},
{
"name": "raise-threshold value",
"desc": "Upper threshold at which an SNMP trap is triggered. Range: 50 through 100. NOTE: If you enter a value for raise-threshold but n... | security—To view this statement in the configuration.
security-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 12.1X45-D10. | [] |
pool-utilization-alarm (Source NAT Next Gen Services) | pool-utilization-alarm {
clear-threshold value;
raise-threshold value;
} | [edit services nat source pool nat-pool-name] | Define the NAT pool utilization level that triggers SNMP traps and the pool utilization level that clears
SNMP traps. For pools that use port-block allocation, the utilization is based on the number of ports
that are used; for pools that do not use port-block allocation, the utilization is based on the number of
addres... | [
{
"name": "clear-threshold",
"desc": ""
},
{
"name": "value",
"desc": "NAT pool utilization percentage that clears the trap. Range: 40 through 100 Default: 0 (traps are not created)"
},
{
"name": "raise-threshold",
"desc": ""
},
{
"name": "value",
"desc": "NAT pool util... | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 19.3R2. | [] |
pool-utilization-alarm | pool-utilization-alarm (clear-threshold value | raise-threshold value); | [edit security nat source] | Define the global pool utilization alarm thresholds for Network Address Translation (NAT) source IP
address pools without Port Address Translation (PAT). When the pool utilization exceeds the upper
(raise) threshold or falls below the lower (clear) threshold, an SNMP trap is triggered. | [
{
"name": "clear-threshold value",
"desc": "Lower threshold at which an SNMP trap is triggered."
},
{
"name": "raise-threshold value",
"desc": "Upper threshold at which an SNMP trap is triggered."
}
] | security—To view this statement in the configuration.
security-control—To add this statement to the configuration. | Statement modified in Junos OS Release 9.2. | [] |
pop (Dynamic VLANs) | pop; | [edit dynamic-profiles profile-name interfaces interface-name unit logical-unit-number output-vlan-
map] | For dynamic VLAN interfaces, specify the VLAN rewrite operation to remove a VLAN tag from the top
of the VLAN tag stack. The outer VLAN tag of the frame is removed. | [] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 10.4. | [
"Removing a VLAN Tag",
"Stacking and Rewriting VLAN Tags for the Layer 2 Wholesale Solution"
] |
pop (protocols mpls) | pop; | [edit logical-systems logical-system-name protocols mpls static-label-switched-path lsp-name
transit incoming-label],
[edit protocols mpls static-label-switched-path lsp-name transit incoming-label] | Remove the label from the top of the label stack. If there is another label in the stack, that label becomes
the label at the top of the label stack. Otherwise, the packet is forwarded as a native protocol packet
(typically, as an IP packet). | [] | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 7.4. | [
"Configuring the Intermediate and Egress Routers for Static LSPs"
] |
pop3-profile (Security Content Security Policy Antivirus) | pop3-profile profile-name; | [edit security utm default-configuration]
[edit security utm utm-policy policy-name anti-virus] | Configure a Content Security policy for the antivirus POP3 protocol and attach this policy to a security
profile to implement it. | [] | security—To view this statement in the configuration.
security-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 9.5.
The [edit security utm default-configuration] hierarchy level is introduced in Junos OS Release 18.2R1. | [] |
pop3-profile (Security Content Security Policy Content Filtering) | pop3-profile profile-name; | [edit security utm default-configuration]
[edit security utm utm-policy policy-name content-filtering] | Configure a Content Security policy for the content filtering POP3 protocol and attach this policy to a
security profile to implement it. | [] | security—To view this statement in the configuration.
security-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 9.5.
The [edit security utm default-configuration] hierarchy level is introduced in Junos OS Release 18.2R1. | [] |
pop | pop; | [edit interfaces interface-name unit logical-unit-number input-vlan-map],
[edit interfaces interface-name unit logical-unit-number output-vlan-map],
[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number
input-vlan-map],
[edit logical-systems logical-system-name interfaces interfa... | NOTE: On EX4300 switches, pop is not supported at the [edit interfaces interface-name
unit logical-unit-number input-vlan-map] hierarchy level.
For Gigabit Ethernet IQ, 10-Gigabit Ethernet IQ2, and IQ2-E interfaces; 10-Gigabit Ethernet LAN/WAN
PIC; aggregated Ethernet interfaces using Gigabit Ethernet IQ interfaces; 10... | [] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 7.4. | [
"Removing a VLAN Tag",
"Configuring Q-in-Q Tunneling on EX Series Switches with ELS Support"
] |
pop-all-labels | pop-all-labels {
required-depth number;
} | [edit interfaces interface-name atm-options mpls],
[edit interfaces interface-name fastether-options mpls],
[edit interfaces interface-name gigether-options mpls],
[edit interfaces interface-name sonet-options mpls] | For passive monitoring on ATM, SONET/SDH, Fast Ethernet, and Gigabit Ethernet interfaces only,
removes up to two MPLS labels from incoming IP packets. For passive monitoring on T Series devices,
removes up to five MPLS labels from incoming IP packets. For passive monitoring on MX Series routers
with MPCs, all labels a... | [] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 7.4. | [
"Passive Flow Monitoring for MPLS Encapsulated Packets",
"Junos OS Network Interfaces Library for Routing Devices"
] |
pop-and-forward (Protocols MPLS) | pop-and-forward; | [edit logical-systems name protocols mpls label-switched-path ],
[edit logical-systems name routing-instances name protocols mpls label-switched-path ],
[edit protocols mpls label-switched-path ],
[edit routing-instances name protocols mpls label-switched-path ] | Enable LSP as pop-and-forward with auto-delegation signaling enabled by default.
The LSP undergoes a make-before-break from a regular point-to-point LSP to a pop-and-forward LSP. | [] | routing | Statement introduced in Junos OS Release 18.1R1. | [
"Pop-and-Forward LSP Configuration"
] |
pop-and-forward (Protocols RSVP) | pop-and-forward {
application-label depth depth;
} | [edit logical-systems name protocols rsvp],
[edit logical-systems name routing-instances name protocols rsvp],
[edit protocols rsvp],
[edit routing-instances name protocols rsvp] | Specify RSVP pop-and-forward LSP tunnel-specific global parameters. The application label depth
(AppLD) value must be configured uniformly across the RSVP-TE network. | [
{
"name": "application-label depth depth",
"desc": "Specify the maximum number of service labels. Range: 0 through 3 Default: 1"
}
] | routing | Statement introduced in Junos OS Release 18.1R1. | [
"Pop-and-Forward LSP Configuration"
] |
pop-pop | pop-pop; | [edit interfaces interface-name unit logical-unit-number input-vlan-map],
[edit interfaces interface-name unit logical-unit-number output-vlan-map],
[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number
input-vlan-map],
[edit logical-systems logical-system-name interfaces interfa... | For Gigabit Ethernet IQ, IQ2 and IQ2-E interfaces, 10-Gigabit Ethernet LAN/WAN PIC, for aggregated
Ethernet interfaces using Gigabit Ethernet IQ2 and IQ2-E or 10-Gigabit Ethernet PICs on MX Series
routers, and 100-Gigabit Ethernet Type 5 PIC with CFP, and for 10-Gigabit Ethernet SFP interfaces on
EX Series switches, sp... | [] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 8.1. | [
"Removing the Outer and Inner VLAN Tags"
] |
pop-swap | pop-swap; | [edit interfaces interface-name unit logical-unit-number input-vlan-map],
[edit interfaces interface-name unit logical-unit-number output-vlan-map],
[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number
input-vlan-map],
[edit logical-systems logical-system-name interfaces interfa... | Specify the VLAN rewrite operation to remove the outer VLAN tag of the frame, and replace the inner
VLAN tag of the frame with a user-specified VLAN tag value. The inner tag becomes the outer tag in the
final frame.
You can use this statement on Gigabit Ethernet IQ, IQ2, IQ2-E interfaces, 10-Gigabit Ethernet
LAN/WAN PI... | [] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 8.1. | [
"Removing the Outer VLAN Tag and Rewriting the Inner VLAN Tag"
] |
port (Access LDAP) | port port-number; | [edit access ldap-server server-address],
[edit access profile profile-name ldap-server server-address] | Configure the port number on which to contact the LDAP server. | [
{
"name": "port-number",
"desc": "Port number on which to contact the LDAP server."
}
] | access—To view this statement in the configuration.
access-control—To add this statement to the configuration. | Statement introduced in Release 8.5 of Junos OS. | [
"LDAP Functionality in Integrated User Firewall"
] |
port (cflowd) | port port-number; | [edit forwarding-options accounting group-name output cflowd hostname],
[edit forwarding-options monitoring group-name family inet output flow-server hostname],
[edit forwarding-options sampling family (inet | inet6 | mpls) output flow-server hostname] | Specify the UDP port number on the cflowd host system. | [
{
"name": "port-number",
"desc": "Any valid UDP port number on the host system."
}
] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 7.4. | [
"Directing Traffic Sampling Output to a Server Running the cflowd Application"
] |
port (Chassis Synchronization) | port {
auxiliary {
client {
time-of-day-format {
ascii string;
}
}
}
} | [edit chassis synchronization],
[edit chassis synchronization source interfaces (external-a | external-b | interface interface-
name)],
[edit chassis synchronization source interfaces (external | interface interface-name)],
[edit chassis synchronization source interfaces (external-0/0 | external-1/0 | interface
inter... | Configure the clock synchronization ports. | [
{
"name": "time-of-day-format",
"desc": "Specify the time of day (TOD) message format."
},
{
"name": "ascii",
"desc": "Configure the TOD message format in ASCII characters on the auxiliary port"
}
] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 13.3. | [
"Integrated Global Navigation Satellite System (GNSS) on ACX500 Series Routers"
] |
port (Chassis) | port name {
channel-speed(10g | 25g | 50g | disable-auto-speed-detection);
forwarding-mode {
sa-multicast;
}
framing(e1 | e3 | sdh | sonet | t1 | t3);
no-mcast-replication;
no-temperature-monitoring;
number-of-sub-ports number-of-sub-ports;
short-reach-mode(disable | enable);
... | [edit chassis fpc name pic],
[edit chassis lcc name fpc name pic],
[edit chassis member name fpc name pic] | Configure properties for a specific port number. | [
{
"name": "name",
"desc": "Port number Range: Depends on the device."
},
{
"name": "channel-speed",
"desc": "Port channel speed"
},
{
"name": "10g",
"desc": "Set the port speed to 10G. This will restart PFE on some platforms."
},
{
"name": "25g",
"desc": "Set the port sp... | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 7.4. | [] |
port (Diameter Peer) | port port-number; | [edit diameter peer peer-name connect-actively] | Specify the destination TCP port used by the active connection to peer. | [
{
"name": "port-number",
"desc": "Number of the TCP port."
}
] | admin—To view this statement in the configuration.
admin-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 9.6. | [
"Configuring Diameter",
"Configuring Diameter Peers"
] |
port (Flow Monitoring) | port port-number; | [edit forwarding-options accounting name output cflowd hostname],
[edit forwarding-options monitoring name family inet output cflowd hostname],
[edit forwarding-options sampling instance instance-name family (inet |inet6 |mpls) output flow-
server hostname],
[edit forwarding-options sampling family (inet | inet6 | mpls... | Specify the User Datagram Protocol (UDP) port number on the cflowd host system or flow server. | [
{
"name": "port-number",
"desc": "Any valid UDP port number on the host system."
}
] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 7.4. | [
"Enabling Flow Aggregation"
] |
port (LRF Profile) | port collector-port-number; | [edit services lrf profile profile-name collector collector-name destination] | Specify the destination port of the collector. | [
{
"name": "collector-port-number",
"desc": "Port number for the destination address of the collector."
}
] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 17.1.
Support for Next Gen Services introduced in Junos OS Release 19.3R1 on MX Series. | [
"Configuring Logging and Reporting for Junos OS Subscriber Aware",
"Configuring an LRF Profile for Subscribers",
"Configuring Logging and Reporting for Subscriber Management"
] |
port (NETCONF) | port port-number; | [edit system services netconf ssh] | Configure the TCP port used for NETCONF-over-SSH connections.
NOTE:
•
The configured port accepts only NETCONF-over-SSH connections. Regular SSH
session requests for this port are rejected.
•
The default SSH port (22) continues to accept NETCONF sessions even with a
configured NETCONF server port. To disable the SSH p... | [
{
"name": "port port-number",
"desc": "Port number on which to enable incoming NETCONF connections over SSH."
}
] | system—To view this statement in the configuration.
system-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 10.0. | [
"Configuring NETCONF-Over-SSH Connections on a Specified TCP Port"
] |
port (Origin Validation for BGP) | port port-number; | [edit logical-systems logical-system-name routing-instances instance-name routing-options
validation group group-name session server-ip-address],
[edit logical-systems logical-system-name routing-options validation group group-name session
server-ip-address],
[edit routing-instances instance-name routing-options vali... | Configure an alternative TCP port number to be used for the outgoing connection with the cache server.
For a given deployment, an RPKI cache server might listen on some other TCP port number. If so,
configure the alternative port number with this statement. | [
{
"name": "port-number",
"desc": "TCP port number to be used for the outgoing connection to the cache server. Default: 2222 NOTE: Note: Starting in Junos OS Releases 20.1R3, 20.2R3, 20.3R2, 20.4R2, 21.1R1, the default TCP port is 8282."
}
] | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 12.2.
Statement introduced in Junos OS Release 12.3 for ACX Series routers. | [
"BGP Origin Validation"
] |
port (OVSDB) | port number; | [edit protocols ovsdb controller protocol] | Specify the software-defined networking (SDN) controller port to which a Juniper Networks device that
supports the Open vSwitch Database (OVSDB) management protocol connects. | [
{
"name": "number",
"desc": "Number of SDN controller port. Range: 1024 through 65,535 Default: 6632"
}
] | admin—To view this statement in the configuration.
admin-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 14.1R2. | [
"Understanding How to Set Up OVSDB Connections on a Juniper Networks Device"
] |
port (Packet Forwarding) | port port-number {
description text-description;
interface interface-name {
broadcast;
description text-description;
no-listen;
server address <logical-system logical-system-name> <routing-instance routing-instance-
name>;
}
server address <logical-system logical-system-n... | [edit forwarding-options helpers] | Configure a port helper on the router or switch, which listens for LAN broadcast traffic on a custom
UDP port number and forwards traffic to particular destination servers as unicast traffic.
To set up a port helper, configure the UDP port number and optionally an interface on which to listen
for broadcast traffic, an... | [
{
"name": "port-number",
"desc": "UDP port number for listening. Range: 1 through 65535"
}
] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 7.4.
Support for multiple server instances for a given port introduced in Junos OS Release 17.2 for MX Series
routers.
Support for multiple servers on a given port introduced in Junos OS Release 17.3R1 for EX9200
switches. | [
"Configuring DNS and TFTP Packet Forwarding",
"Configuring Port-based LAN Broadcast Packet Forwarding",
"Configuring Routers, Switches, and Interfaces as DHCP and BOOTP Relay Agents"
] |
port (Protocols OpenFlow) | port port; | [edit protocols openflow switch switch-name controller protocol protocol] | Specify the OpenFlow controller port to which the OpenFlow virtual switch connects. | [
{
"name": "port",
"desc": "Numeric value specifying the OpenFlow controller port to which the device should connect. Range: 1024 through 65,535 Default: 6633"
}
] | admin—To view this statement in the configuration.
admin-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 13.3. | [
"Understanding Support for OpenFlow on Devices Running Junos OS"
] |
port (RADIUS Server) | port port-number; | [edit access radius-server address],
[edit access profile profile-name radius-server address] | Configure the port number to which the RADIUS requests are sent. | [
{
"name": "port-number",
"desc": "Port number to which the RADIUS requests are sent."
}
] | access—To view this statement in the configuration.
access-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 17.1. | [
"Configuring RADIUS Servers",
"Understanding Network Elements",
"Understanding How a RADIUS Server Controls Policy and Charging Control Rules",
"External Authentication Servers"
] |
port (REST API) | port port-number; | [edit system services rest http],
[edit system services rest https] | Specify the port number. | [
{
"name": "port-number",
"desc": "Port number on which to accept HTTP or HTTPS connections. Range: 1024 through 65535 Default: 3000 for HTTP, 3443 for HTTPS"
}
] | system—To view this statement in the configuration.
system-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 14.2. | [] |
port (RPM) | port number; | [edit services monitoring rpm owner name test name udp] | Specify the port number for the RPM probe server. | [
{
"name": "number",
"desc": "Port number for the probe server. The value can be 7 or 49,160 through 65,535."
}
] | system—To view this statement in the configuration.
system-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Evolved Release 20.1R1. | [
"Configuring RPM Receiver Servers"
] |
port (satellite-policies port-group-alias) | port [port-number | port-number-range | all]; | [edit policy-options satellite-policies port-group-alias port-group-alias-name pic pic-number] | Specify the port or ports to apply a port group alias for satellite policies in a Junos Fusion.
You must also specify the PIC when you use this statement. | [
{
"name": "port-number",
"desc": "The port number on the PIC on the satellite device."
},
{
"name": "port-number-range",
"desc": "A range of port numbers on the PIC."
},
{
"name": "all",
"desc": "All ports on the PIC."
}
] | admin—To view this statement in the configuration.
admin-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 14.2R3. | [
"Configuring Junos Fusion Provider Edge",
"Configuring or Expanding a Junos Fusion Enterprise"
] |
port (Security Antivirus) | port port-number; | [edit security utm default-configuration]
[edit security utm feature-profile anti-virus juniper-express-engine pattern-update proxy]
[edit security utm feature-profile anti-virus kaspersky-lab-engine pattern-update proxy]
[edit security utm feature-profile anti-virus sophos-engine pattern-update proxy] | Set the port number for the proxy server. | [] | security—To view this statement in the configuration.
security-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 11.2.
The [edit security utm default-configuration] hierarchy level is introduced in Junos OS Release 18.2R1. | [] |
port (Security Source NAT) | port {
block-allocation {
active-block-timeout timeout-interval;
block-size block-size;
interim-logging-interval timeout-interval;
last-block-recycle-timeout timeout-interval;
log disable;
maximum-blocks-per-host maximum-block-number;
}
deterministic {
... | [edit security nat source pool pool-name] | Specify the Port Address Translation (PAT) for a source pool. | [
{
"name": "block-allocation",
"desc": "Allocates a block of ports for translation, instead of allocating individual ports."
},
{
"name": "deterministic",
"desc": "Maps an incoming (source) IP address and port to the specific destination address and"
},
{
"name": "no-translation",
"de... | security—To view this statement in the configuration.
security-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 9.2. Statement updated with block-allocation, deterministic,
and twin-port options in Junos OS Release 12.1X47-D10. Statement updated with interim-logging-
interval and last-block-recycle-timeout options in Junos OS Release 15.1X49-D60. | [] |
port (Security Web Filtering Server) | port number; | [edit security utm default-configuration]
[edit security utm feature-profile web-filtering surf-control-integrated server]
[edit security utm feature-profile web-filtering websense-redirect profile profile-name server]
[edit security utm feature-profile web-filtering juniper-enhanced profile profile-name server] | Enter the port number for communicating with the server. (Default ports are 80, 8080, and 8081.) | [] | security—To view this statement in the configuration.
security-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 9.5 .
The [edit security utm default-configuration] hierarchy level is introduced in Junos OS Release 18.2R1. | [] |
port (Services NAT) | port {
automatic (sequential | random-allocation);
range low minimum-value high maximum-value random-allocation;
preserve-parity;
preserve-range;
deterministic-port-block-allocation <block-size block-size> <include-boundary-addresses>;
secured-port-block-allocation {
active-block-time... | [edit services nat pool nat-pool-name] | Specify the NAT pool port or range. You can configure an automatically assigned port or specify a range
with minimum and maximum values.
NOTE: Starting in Junos OS Release 14.2R1, the sequential option is introduced to enable
you to configure sequential allocation of ports. The sequential and random-allocation
options ... | [
{
"name": "automatic",
"desc": "Cause the port assignment type to be automatically performed by the router."
},
{
"name": "sequential",
"desc": "Allocate ports in a sequential manner. With sequential allocation, the next available address in the NAT pool is selected only when all the ports avail... | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | port statement introduced before Junos OS Release 7.4.
random-allocation statement introduced in Junos OS Release 9.3.
secured-port-block-allocation statement introduced in Junos OS Release 11.2.
deterministic-port-block-allocation statement introduced in Junos OS Release 12.1.
sequential statement introduced in Junos ... | [
"Configuring Source and Destination Addresses Network Address Translation Overview",
"Configuring Address Pools for Network Address Port Translation (NAPT) Overview"
] |
port (Services Voice) | port {
minimum port-number;
maximum port-number;
} | [edit interfaces lsq-fpc/pic/port unit logical-unit-number compression rtp],
[edit logical-systems logical-system-name interfaces lsq-fpc/pic/port unit logical-unit-number
compression rtp] | For voice services interfaces only, specify a range of User Datagram Protocol (UDP) destination port
numbers in which RTP compression takes place. | [
{
"name": "minimum port-number",
"desc": "Specify the minimum port number."
},
{
"name": "maximum port-number",
"desc": "Specify the maximum port number."
}
] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 7.4. | [
"Configuring Compression of Voice Traffic"
] |
port (Services) | port port-number; | [edit services unified-access-control infranet-controller hostname] | Specify the port on the IC Series device through which the SRX Series Firewall should establish
connections (default 11123). Possible values for this statement range from 1 through 65,535.
Use this statement when you are configuring the SRX Series Firewall to act as a Junos OS Enforcer in a
Unified Access Control (UAC)... | [] | services—To view this statement in the configuration.
services-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 9.4. | [] |
port (Source NAT Next Gen Services) | port {
automatic (random-allocation | round-robin);
block-allocation {
active-block-timeout timeout-interval;
block-size block-size;
interim-logging-interval timeout-interval;
maximum-blocks-per-host maximum-block-number
}
deterministic {
block-size block-size;
... | [edit services nat source pool nat-pool-name] | Configure port assignment for a source NAT pool. Port-overloading factor is configurable between 2 -
Through the raise-threshold option, you can raise threshold for alarm on port usage per overload index
value through 50 to 100.
Through the clear-threshold option, you can clear threshold for alarm on port usage per ov... | [] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 19.3R2.
The port-overloading-usage-alarm option added in Junos OS Release 23.4R1. | [] |
port (SRC Server) | port port-number; | [edit system services service-deployment servers server-address] | Configure the port number on which to contact the SRC server. | [
{
"name": "port-number",
"desc": "(Optional) The TCP port number for the SRC server."
}
] | system—To view this statement in the configuration.
system-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 7.4. | [
"Configuring the Junos OS to Work with SRC Software"
] |
port (Subscriber Limits) | port number {
limit limit;
} | [edit system services resource-monitor subscribers-limit client-type name fpc slot-number pic
number] | Configure the maximum number of subscribers of a client type allowed to be logged in on the specified
port. When that number is reached, subsequent logins on the port are denied until the current number
of subscribers drops below the maximum allowed. You can also specify the maximum number of
subscribers of a client ty... | [
{
"name": "number",
"desc": "Port number."
},
{
"name": "limit",
"desc": "Maximum number of subscribers. Range: 1 through 256,000"
}
] | system—To view this statement in the configuration.
system-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 17.3R1. | [
"Limiting Subscribers by Client Type and Hardware Element with Resource Monitor",
"Resource Monitoring for Subscriber Management and Services"
] |
port (Syslog) | port port number; | [edit system syslog host hostname | other-routing-engine| scc-master)] | Specify the port number for the remote syslog server. | [
{
"name": "port number",
"desc": "Port number of the remote syslog server. Range: 0 through 65535 Default: 514"
}
] | system—To view this statement in the configuration.
system-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 11.3. | [] |
port (System Log Messsages) | port port-number; | [edit interfaces interface-name services-options syslog host hostname] | Specify the UDP port for system log messages on the host. The default port is 514. | [
{
"name": "port-number",
"desc": "Port number for system log messages."
}
] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 11.1. | [
"Configuring System Logging for Services Interfaces"
] |
port (TWAMP) | port number; | [edit services monitoring twamp server] | TWAMP server listening port. | [
{
"name": "number",
"desc": "Port number."
}
] | system—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 9.3.
Statement introduced in Junos OS Evolved 20.3R1. | [
"Configuring TWAMP on MX, M, T, and PTX Series Routers and EX4300 Series Switches"
] |
port | port port-number; | [edit snmp v3 target-address target-address-name] | Configure a UDP port number for an SNMP target.
Default
If you omit this statement, the default port is 162. | [
{
"name": "port-number",
"desc": "Port number for the SNMP target."
}
] | snmp—To view this statement in the configuration.
snmp-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 7.4. | [] |
port-error-disable | port-error-disable {
disable-timeout timeout ;
} | [edit ethernet-switching-options] | Disable rather than block an interface when enforcing MAC limiting, MAC move limiting, and rate-
limiting configuration options for shutting down the interface, and allow the interface to recover
automatically from the error condition after a specified period of time:
•
If you have enabled MAC limiting with the shutdow... | [] | system—To view this statement in the configuration.
system–control—To add this statement to the configuration. | Statement introduced in Junos OS Release 9.6. | [
"Configuring MAC Move Limiting (non-ELS)"
] |
port-forwarding (Destination NAT Next Gen Services) | port-forwarding map-name {
destined-port port-id translated-port port-id;
} | [edit services nat destination] | Configure a port forwarding map, which translates the original destination port of a packet to a different
port. This translation is a static, one-to-one mapping.
Port forwarding allows a packet to reach a host within a masqueraded, typically private, network, based
on the port number on which the packet was received f... | [
{
"name": "map-name",
"desc": "Name of the port forwarding map."
},
{
"name": "destined-port port-id",
"desc": "Original destination port number."
},
{
"name": "translated-port port-id",
"desc": "Port number to which the original port is mapped."
}
] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | [] | |
port-forwarding | port-forwarding map-name {
destined-port;
translated-port;
} | [edit services nat] | Specify the mapping for port forwarding.
The port-forwarding statement is supported on the MS-DPC, MS-100, MS-400, and MS-500
MultiServices PICS. Starting in Junos OS Release 17.4R1, the port-forwarding statement is also supported
on the MS-MPC and MS-MIC. | [
{
"name": "map-name",
"desc": "Identifier for the port forwarding map. The remaining statements are explained separately."
}
] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 11.4. | [
"Configuring Port Forwarding for Static Destination Address Translation",
"Configuring Port Forwarding Without Destination Address Translation"
] |
port-forwarding-mappings (Destination NAT Rule Next Gen Services) | port-forwarding-mappings map-name; | [edit services nat destination rule-set rule-set-name rule rule-name then] | Specify the name of the port-forwarding map that the NAT rule uses to translate the original destination
port of a packet to a different port. | [] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | [] | |
port-forwarding-mappings | port-forwarding-mappings map-name; | [edit services nat rule rule-name term term-name then] | Specify the name of the mapping for port forwarding in a Network Address Translation rule.
The port-forwarding-mappings statement is supported on the MS-DPC, MS-100, MS-400, and MS-500
MultiServices PICS. Port forwarding on the MS-DPC, MS-100, MS-400, and MS-500 MultiServices PICS
supports only the dnat-44 and twice-na... | [
{
"name": "map-name",
"desc": "Identifier for the port forwarding mapping."
}
] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 11.4. | [
"Configuring Port Forwarding for Static Destination Address Translation",
"Configuring Port Forwarding Without Destination Address Translation"
] |
port-group-alias (satellite-policies) | port-group-alias port-group-alias-name {
pic pic-number {
port [port-number | port-number-range | all];
}
} | [edit policy-options satellite-policies] | Configure a port group alias for satellite policies in a Junos Fusion.
A port group alias is used to define the candidate uplink ports on satellite devices that use the satellite
policy.
CAUTION: The physically connected uplink ports on a satellite device must be defined
as candidate uplink ports in the Junos Fusion co... | [
{
"name": "port-group-alias-name",
"desc": "The user-defined name of the port group alias. The remaining statements are explained separately."
}
] | admin—To view this statement in the configuration.
admin-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 14.2R3. | [
"Configuring Junos Fusion Provider Edge",
"Configuring or Expanding a Junos Fusion Enterprise"
] |
port-id (MACsec for MX Series) | port-id port-id-number; | [edit security macsec connectivity-association connectivity-association-name secure-channel
secure-channel-name id] | Specify a port ID in a secure channel when enabling MACsec using static secure association key (SAK)
security mode. The port IDs must match on a sending and receiving secure channel on each side of a link
to enable MACsec.
Once the port numbers match, MACsec is enabled for all traffic on the connection.
You only use th... | [
{
"name": "port-id-number",
"desc": "The port ID number."
}
] | admin—To view this statement in the configuration.
admin-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 15.1. | [
"Configuring Media Access Control Security (MACsec) on Routers"
] |
port-id | port-id port-id-number; | [edit security macsec connectivity-association connectivity-association-name secure-channel secure-
channel-name id] | Specify a port ID in a secure channel when enabling MACsec using static secure association key (SAK)
security mode. The port IDs must match on a sending and receiving secure channel on each side of a link
to enable MACsec.
Once the port numbers match, MACsec is enabled for all traffic on the connection.
You only use th... | [
{
"name": "port-id-number",
"desc": "The port ID number."
}
] | admin—To view this statement in the configuration.
admin-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 13.2X50-D15. | [
"Configuring MACsec on EX, QFX and SRX Devices"
] |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.