Unnamed: 0 int64 0 832k | id float64 2.49B 32.1B | type stringclasses 1
value | created_at stringlengths 19 19 | repo stringlengths 5 112 | repo_url stringlengths 34 141 | action stringclasses 3
values | title stringlengths 1 957 | labels stringlengths 4 795 | body stringlengths 1 259k | index stringclasses 12
values | text_combine stringlengths 96 259k | label stringclasses 2
values | text stringlengths 96 252k | binary_label int64 0 1 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
77,881 | 3,507,339,275 | IssuesEvent | 2016-01-08 12:44:20 | NREL/EnergyPlus | https://api.github.com/repos/NREL/EnergyPlus | closed | Zone Node Name not unique in AirLoopHVAC:ReturnPlenum object - need to issue error | EnergyPlus Priority S2 - Medium | Helpdesk Ticket 9254
> On 14 Apr 2014, at 21:42, "EnergyPlus Support" <support@energyplus.helpserve.com> wrote:
>
> Finally(!) figured out what was wrong with this one.
>
> AirLoopHVAC:ReturnPlenum,
> Office FCU Return Plenum,!- Name
> Plenum zone, !- Zone Name
> Office Zone Air Node, !- Zone Node Name
> Plenum Return Air Outlet,!- Outlet Node Name
> , !- Induced Air Outlet Node or NodeList Name
> Office FCU Return Air Outlet; !- Inlet 1 Node Name
>
> The zone node name is the same as the Office zone air node name. The zone node name here should be something unique (not used anywhere else). EnergyPlus should throw an error if this node name is used anywhere else. If you change "Office Zone Air Node" in this object to "Plenum Zone Air Node" it will work as expected.
>
> Mike
>
>
> > But all following time steps is 24, however plenum zone temperature is
> > higher each time.
> >
> > From: EnergyPlus Support [mailto:support@energyplus.helpserve.com]
> > Sent: Friday, March 28, 2014 11:41 PM
> > To: artem.zhukov@hotmail.com
> > Subject: [EnergyPlus #9254]: Plenum zone return path 5-35
> >
> > Plenum node outlet temperatures are always lagged by one zone
> > timestep. So, if you report at the timestep frequency, if the plenum
> > zone temperature is 24C at timestep n, then the plenum outlet node
> > temperature will be 24C at timestep n+1. The plenum inlet temperature
> > (zone return temperature) is added to the plenum zone heat balance at
> > the end of the timestep, so the reported plenum temperature will
> > include that effect, but the plenum outlet node will not change until
> > the following timestep.
> > Mike
> >
> > > I have a plenum zone which has at the given timestamp the
> > temperature
> > > 24.51C, but I can't understand why the plenum return outlet is still
> > > 24C?
> > > Moreover if I add in lighting return fraction 0.3 the zone return
> > > outlet is
> > > increasing its temperature to 24.24C, but still plenum return outlet
> > > is 24C
> > > and all further nodes. How is it possible?
> > >
> > > BR,
> > >
> > > Artem Zhukov
User files
cm_fCube_f-var_w-var-VAV_luminar.idf | 1.0 | Zone Node Name not unique in AirLoopHVAC:ReturnPlenum object - need to issue error - Helpdesk Ticket 9254
> On 14 Apr 2014, at 21:42, "EnergyPlus Support" <support@energyplus.helpserve.com> wrote:
>
> Finally(!) figured out what was wrong with this one.
>
> AirLoopHVAC:ReturnPlenum,
> Office FCU Return Plenum,!- Name
> Plenum zone, !- Zone Name
> Office Zone Air Node, !- Zone Node Name
> Plenum Return Air Outlet,!- Outlet Node Name
> , !- Induced Air Outlet Node or NodeList Name
> Office FCU Return Air Outlet; !- Inlet 1 Node Name
>
> The zone node name is the same as the Office zone air node name. The zone node name here should be something unique (not used anywhere else). EnergyPlus should throw an error if this node name is used anywhere else. If you change "Office Zone Air Node" in this object to "Plenum Zone Air Node" it will work as expected.
>
> Mike
>
>
> > But all following time steps is 24, however plenum zone temperature is
> > higher each time.
> >
> > From: EnergyPlus Support [mailto:support@energyplus.helpserve.com]
> > Sent: Friday, March 28, 2014 11:41 PM
> > To: artem.zhukov@hotmail.com
> > Subject: [EnergyPlus #9254]: Plenum zone return path 5-35
> >
> > Plenum node outlet temperatures are always lagged by one zone
> > timestep. So, if you report at the timestep frequency, if the plenum
> > zone temperature is 24C at timestep n, then the plenum outlet node
> > temperature will be 24C at timestep n+1. The plenum inlet temperature
> > (zone return temperature) is added to the plenum zone heat balance at
> > the end of the timestep, so the reported plenum temperature will
> > include that effect, but the plenum outlet node will not change until
> > the following timestep.
> > Mike
> >
> > > I have a plenum zone which has at the given timestamp the
> > temperature
> > > 24.51C, but I can't understand why the plenum return outlet is still
> > > 24C?
> > > Moreover if I add in lighting return fraction 0.3 the zone return
> > > outlet is
> > > increasing its temperature to 24.24C, but still plenum return outlet
> > > is 24C
> > > and all further nodes. How is it possible?
> > >
> > > BR,
> > >
> > > Artem Zhukov
User files
cm_fCube_f-var_w-var-VAV_luminar.idf | priority | zone node name not unique in airloophvac returnplenum object need to issue error helpdesk ticket on apr at energyplus support wrote finally figured out what was wrong with this one airloophvac returnplenum office fcu return plenum name plenum zone zone name office zone air node zone node name plenum return air outlet outlet node name induced air outlet node or nodelist name office fcu return air outlet inlet node name the zone node name is the same as the office zone air node name the zone node name here should be something unique not used anywhere else energyplus should throw an error if this node name is used anywhere else if you change office zone air node in this object to plenum zone air node it will work as expected mike but all following time steps is however plenum zone temperature is higher each time from energyplus support sent friday march pm to artem zhukov hotmail com subject plenum zone return path plenum node outlet temperatures are always lagged by one zone timestep so if you report at the timestep frequency if the plenum zone temperature is at timestep n then the plenum outlet node temperature will be at timestep n the plenum inlet temperature zone return temperature is added to the plenum zone heat balance at the end of the timestep so the reported plenum temperature will include that effect but the plenum outlet node will not change until the following timestep mike i have a plenum zone which has at the given timestamp the temperature but i can t understand why the plenum return outlet is still moreover if i add in lighting return fraction the zone return outlet is increasing its temperature to but still plenum return outlet is and all further nodes how is it possible br artem zhukov user files cm fcube f var w var vav luminar idf | 1 |
711,522 | 24,467,174,824 | IssuesEvent | 2022-10-07 16:01:22 | craftercms/craftercms | https://api.github.com/repos/craftercms/craftercms | closed | [studio] Edit `studio-api-2.yaml` to specify `type` parameter as `mime-type` for `/webdav/list` API | priority: medium quality validate | ### Duplicates
- [X] I have searched the existing issues
### Latest version
- [X] The issue is in the latest released 4.0.x
- [ ] The issue is in the latest released 3.1.x
### Describe the issue
If you notice the implementation of the GET `http://localhost:8080/studio/api/2/webdav/list` API in Studio code:
```
@Override
@ValidateParams
@HasPermission(type = DefaultPermission.class, action = "webdav_read")
public List<WebDavItem> list(@ValidateStringParam(name = "siteId")
@ProtectedResourceId("siteId") final String siteId,
@ValidateStringParam(name = "profileId") final String profileId,
@ValidateStringParam(name = "path") final String path,
@ValidateStringParam(name = "type") final String type) throws WebDavException {
WebDavProfile profile = getProfile(siteId, profileId);
StringBuilder listPath = new StringBuilder(StringUtils.appendIfMissing(profile.getBaseUrl(), "/"));
MimeType filterType;
try {
Sardine sardine = createClient(profile);
if (StringUtils.isEmpty(type) || type.equals(FILTER_ALL_ITEMS)) {
filterType = MimeType.valueOf(ALL_VALUE);
} else {
filterType = new MimeType(type);
}
if (StringUtils.isNotEmpty(path)) {
String[] tokens = StringUtils.split(path, "/");
for (String token : tokens) {
if (StringUtils.isNotEmpty(token)) {
listPath.append(StringUtils.appendIfMissing(UriUtils.encode(token, charset.name()), "/"));
}
}
}
```
The `type` parameter is being filtered by MIME type, but this is not specified in the API documentation:
https://app.swaggerhub.com/apis/craftercms/studio/4.0.1.0#/webdav/listItemsWebdav
Please align the code with the API documentation
### Steps to reproduce
Steps:
N/A
### Relevant log output
_No response_
### Screenshots and/or videos
_No response_ | 1.0 | [studio] Edit `studio-api-2.yaml` to specify `type` parameter as `mime-type` for `/webdav/list` API - ### Duplicates
- [X] I have searched the existing issues
### Latest version
- [X] The issue is in the latest released 4.0.x
- [ ] The issue is in the latest released 3.1.x
### Describe the issue
If you notice the implementation of the GET `http://localhost:8080/studio/api/2/webdav/list` API in Studio code:
```
@Override
@ValidateParams
@HasPermission(type = DefaultPermission.class, action = "webdav_read")
public List<WebDavItem> list(@ValidateStringParam(name = "siteId")
@ProtectedResourceId("siteId") final String siteId,
@ValidateStringParam(name = "profileId") final String profileId,
@ValidateStringParam(name = "path") final String path,
@ValidateStringParam(name = "type") final String type) throws WebDavException {
WebDavProfile profile = getProfile(siteId, profileId);
StringBuilder listPath = new StringBuilder(StringUtils.appendIfMissing(profile.getBaseUrl(), "/"));
MimeType filterType;
try {
Sardine sardine = createClient(profile);
if (StringUtils.isEmpty(type) || type.equals(FILTER_ALL_ITEMS)) {
filterType = MimeType.valueOf(ALL_VALUE);
} else {
filterType = new MimeType(type);
}
if (StringUtils.isNotEmpty(path)) {
String[] tokens = StringUtils.split(path, "/");
for (String token : tokens) {
if (StringUtils.isNotEmpty(token)) {
listPath.append(StringUtils.appendIfMissing(UriUtils.encode(token, charset.name()), "/"));
}
}
}
```
The `type` parameter is being filtered by MIME type, but this is not specified in the API documentation:
https://app.swaggerhub.com/apis/craftercms/studio/4.0.1.0#/webdav/listItemsWebdav
Please align the code with the API documentation
### Steps to reproduce
Steps:
N/A
### Relevant log output
_No response_
### Screenshots and/or videos
_No response_ | priority | edit studio api yaml to specify type parameter as mime type for webdav list api duplicates i have searched the existing issues latest version the issue is in the latest released x the issue is in the latest released x describe the issue if you notice the implementation of the get api in studio code override validateparams haspermission type defaultpermission class action webdav read public list list validatestringparam name siteid protectedresourceid siteid final string siteid validatestringparam name profileid final string profileid validatestringparam name path final string path validatestringparam name type final string type throws webdavexception webdavprofile profile getprofile siteid profileid stringbuilder listpath new stringbuilder stringutils appendifmissing profile getbaseurl mimetype filtertype try sardine sardine createclient profile if stringutils isempty type type equals filter all items filtertype mimetype valueof all value else filtertype new mimetype type if stringutils isnotempty path string tokens stringutils split path for string token tokens if stringutils isnotempty token listpath append stringutils appendifmissing uriutils encode token charset name the type parameter is being filtered by mime type but this is not specified in the api documentation please align the code with the api documentation steps to reproduce steps n a relevant log output no response screenshots and or videos no response | 1 |
782,671 | 27,502,801,078 | IssuesEvent | 2023-03-05 21:40:43 | phetsims/rosetta | https://api.github.com/repos/phetsims/rosetta | closed | disable 'Submit' button if there are translation errors | priority:3-medium rosetta:2.0 | Created at 2/18/16 dev meeting.
It should not be possible to submit a translation that contains errors. For example see https://github.com/phetsims/joist/issues/319#issuecomment-185889403, where a MessageFormat pattern is missing placeholders.
| 1.0 | disable 'Submit' button if there are translation errors - Created at 2/18/16 dev meeting.
It should not be possible to submit a translation that contains errors. For example see https://github.com/phetsims/joist/issues/319#issuecomment-185889403, where a MessageFormat pattern is missing placeholders.
| priority | disable submit button if there are translation errors created at dev meeting it should not be possible to submit a translation that contains errors for example see where a messageformat pattern is missing placeholders | 1 |
197,411 | 6,955,011,796 | IssuesEvent | 2017-12-07 05:05:57 | SIU-CS/Emerald_Wing-Production | https://api.github.com/repos/SIU-CS/Emerald_Wing-Production | closed | Include WAV meta data reading | Priority - Medium | There are resources online that need to be explored more that can be used to read wav files because they do have meta data that is different than mp3 files. | 1.0 | Include WAV meta data reading - There are resources online that need to be explored more that can be used to read wav files because they do have meta data that is different than mp3 files. | priority | include wav meta data reading there are resources online that need to be explored more that can be used to read wav files because they do have meta data that is different than files | 1 |
368,575 | 10,881,428,960 | IssuesEvent | 2019-11-17 17:43:02 | StrangeLoopGames/EcoIssues | https://api.github.com/repos/StrangeLoopGames/EcoIssues | opened | Make a function to convert TextMeshProTags to HTML tags for web viewer | Medium Priority | In the webviewer we display descriptions taken from the game, but they lose their markup. So this in game:
Becomes this on the web
Make a function that converts some of the textmeshpro tags into html, so that the boldness and color change of text in the game will translate over to the web.
Also it looks like the user description ('this is the new description') is showing in game but not on the web, make sure that gets in the web display too. | 1.0 | Make a function to convert TextMeshProTags to HTML tags for web viewer - In the webviewer we display descriptions taken from the game, but they lose their markup. So this in game:
Becomes this on the web
Make a function that converts some of the textmeshpro tags into html, so that the boldness and color change of text in the game will translate over to the web.
Also it looks like the user description ('this is the new description') is showing in game but not on the web, make sure that gets in the web display too. | priority | make a function to convert textmeshprotags to html tags for web viewer in the webviewer we display descriptions taken from the game but they lose their markup so this in game becomes this on the web make a function that converts some of the textmeshpro tags into html so that the boldness and color change of text in the game will translate over to the web also it looks like the user description this is the new description is showing in game but not on the web make sure that gets in the web display too | 1 |
404,541 | 11,858,901,120 | IssuesEvent | 2020-03-25 12:22:59 | hotosm/tasking-manager | https://api.github.com/repos/hotosm/tasking-manager | closed | Add handling for route /user/{id} and 404. | Component: Frontend Priority: Medium Status: Needs implementation Type: Bug | If you hit the url on frontend with a non-existent user-id the page keeps loading for infinite time.
The profile page with wireframes is rendered and never unmounted, user never gets to know that user is non-existent.
For reference:
| 1.0 | Add handling for route /user/{id} and 404. - If you hit the url on frontend with a non-existent user-id the page keeps loading for infinite time.
The profile page with wireframes is rendered and never unmounted, user never gets to know that user is non-existent.
For reference:
| priority | add handling for route user id and if you hit the url on frontend with a non existent user id the page keeps loading for infinite time the profile page with wireframes is rendered and never unmounted user never gets to know that user is non existent for reference | 1 |
241,921 | 7,835,759,991 | IssuesEvent | 2018-06-17 11:01:20 | status-im/status-react | https://api.github.com/repos/status-im/status-react | closed | Different fee amount of the same precision is shown for same sum after editing the sum [develop] | bug medium-priority | ### Description
*Type*: Bug
*Summary*:
Max fee to send 10 ETH is shown as "0.0144883" and later is shown as "0.0144890" if edit the sum. If move slider back to mid position and again to max fee then fee amount is shown as "0.0144883". Actual amounts shown for the fee in your case might be other numbers, but issue is in getting different amounts for the same sum. I would expect getting same fee amount for the same sum whatever edits are performed in the input field.
It's possible that fee will change for the same amount after some time, however here it's changing from X to Y and than again to same X value (if re-open screen or move slider back to mid position and to max), so it's not because network got some fee changes.
We had issue #1489 where precision/amount for the fee was different. Now precision is OK but amount is not OK. It looks like we update fee "on delete" but do not on "on type".
#### Expected behavior
same fee with same precision shown for the same sum.
#### Actual behavior
Max fee to send 10 ETH is shown as "0.0144883" and later is shown as "0.0144890" if edit the sum
### Reproduction
video: https://drive.google.com/open?id=0Bz3t9zSg1wb7bG50MmhNRlVXc28
TestFairy session: https://app.testfairy.com/projects/4803622-status/builds/6191757/sessions/2/?accessToken=FY1zxVVDrNl9-xmLXYCbQSereYs
- Open Status
- Open 1-1 chat
- Enter /send command, choose contact and enter tx value '10'
- Move tx fee slider to the right (maximal fee)
- Change the tx value to '1'. Observe/wait till fee will be changed to another amount
- Change the tx value to '10' again
- Observe that the fee value for tx value of '10' is always the same
### Additional Information
* Status version: develop 0.9.8-99-g63d9301a+
* Operating System:
Real device Samsung Galaxy S6, Android 6.0.1
Real device iPhone 6s, iOS 10.2.1 | 1.0 | Different fee amount of the same precision is shown for same sum after editing the sum [develop] - ### Description
*Type*: Bug
*Summary*:
Max fee to send 10 ETH is shown as "0.0144883" and later is shown as "0.0144890" if edit the sum. If move slider back to mid position and again to max fee then fee amount is shown as "0.0144883". Actual amounts shown for the fee in your case might be other numbers, but issue is in getting different amounts for the same sum. I would expect getting same fee amount for the same sum whatever edits are performed in the input field.
It's possible that fee will change for the same amount after some time, however here it's changing from X to Y and than again to same X value (if re-open screen or move slider back to mid position and to max), so it's not because network got some fee changes.
We had issue #1489 where precision/amount for the fee was different. Now precision is OK but amount is not OK. It looks like we update fee "on delete" but do not on "on type".
#### Expected behavior
same fee with same precision shown for the same sum.
#### Actual behavior
Max fee to send 10 ETH is shown as "0.0144883" and later is shown as "0.0144890" if edit the sum
### Reproduction
video: https://drive.google.com/open?id=0Bz3t9zSg1wb7bG50MmhNRlVXc28
TestFairy session: https://app.testfairy.com/projects/4803622-status/builds/6191757/sessions/2/?accessToken=FY1zxVVDrNl9-xmLXYCbQSereYs
- Open Status
- Open 1-1 chat
- Enter /send command, choose contact and enter tx value '10'
- Move tx fee slider to the right (maximal fee)
- Change the tx value to '1'. Observe/wait till fee will be changed to another amount
- Change the tx value to '10' again
- Observe that the fee value for tx value of '10' is always the same
### Additional Information
* Status version: develop 0.9.8-99-g63d9301a+
* Operating System:
Real device Samsung Galaxy S6, Android 6.0.1
Real device iPhone 6s, iOS 10.2.1 | priority | different fee amount of the same precision is shown for same sum after editing the sum description type bug summary max fee to send eth is shown as and later is shown as if edit the sum if move slider back to mid position and again to max fee then fee amount is shown as actual amounts shown for the fee in your case might be other numbers but issue is in getting different amounts for the same sum i would expect getting same fee amount for the same sum whatever edits are performed in the input field it s possible that fee will change for the same amount after some time however here it s changing from x to y and than again to same x value if re open screen or move slider back to mid position and to max so it s not because network got some fee changes we had issue where precision amount for the fee was different now precision is ok but amount is not ok it looks like we update fee on delete but do not on on type expected behavior same fee with same precision shown for the same sum actual behavior max fee to send eth is shown as and later is shown as if edit the sum reproduction video testfairy session open status open chat enter send command choose contact and enter tx value move tx fee slider to the right maximal fee change the tx value to observe wait till fee will be changed to another amount change the tx value to again observe that the fee value for tx value of is always the same additional information status version develop operating system real device samsung galaxy android real device iphone ios | 1 |
22,215 | 2,645,777,999 | IssuesEvent | 2015-03-13 02:10:28 | prikhi/evoluspencil | https://api.github.com/repos/prikhi/evoluspencil | opened | No empty page at startup and not able to create one | 2–5 stars bug imported Priority-Medium | _From [frederic.vandaele](https://code.google.com/u/frederic.vandaele/) on September 17, 2009 09:02:57_
What steps will reproduce the problem? 1. open Pencil
2. click on "New Page ..." (optional) - not working What is the expected output? What do you see instead? 1. we are supposed to have an empty document by default when we start Pencil
2. clicking on "New Page ..." should create a new page. What version of the product are you using? On what operating system? - Pencil 1.0.7 BETA
- FF 3.5.3
- WinXP Please provide any additional information below.
_Original issue: http://code.google.com/p/evoluspencil/issues/detail?id=109_ | 1.0 | No empty page at startup and not able to create one - _From [frederic.vandaele](https://code.google.com/u/frederic.vandaele/) on September 17, 2009 09:02:57_
What steps will reproduce the problem? 1. open Pencil
2. click on "New Page ..." (optional) - not working What is the expected output? What do you see instead? 1. we are supposed to have an empty document by default when we start Pencil
2. clicking on "New Page ..." should create a new page. What version of the product are you using? On what operating system? - Pencil 1.0.7 BETA
- FF 3.5.3
- WinXP Please provide any additional information below.
_Original issue: http://code.google.com/p/evoluspencil/issues/detail?id=109_ | priority | no empty page at startup and not able to create one from on september what steps will reproduce the problem open pencil click on new page optional not working what is the expected output what do you see instead we are supposed to have an empty document by default when we start pencil clicking on new page should create a new page what version of the product are you using on what operating system pencil beta ff winxp please provide any additional information below original issue | 1 |
522,288 | 15,158,320,955 | IssuesEvent | 2021-02-12 00:51:27 | NOAA-GSL/MATS | https://api.github.com/repos/NOAA-GSL/MATS | closed | Ensemble histograms should not plot matched for different bins | Priority: Medium Project: MATS Status: Closed Type: Task | ---
Author Name: **molly.b.smith** (@mollybsmith-noaa)
Original Redmine Issue: 72023, https://vlab.ncep.noaa.gov/redmine/issues/72023
Original Date: 2019-12-05
Original Assignee: molly.b.smith
---
We need a dialog that yells at the user if they try to plot matched on two curves with different bins, because that doesn't make sense as far as histograms go.
| 1.0 | Ensemble histograms should not plot matched for different bins - ---
Author Name: **molly.b.smith** (@mollybsmith-noaa)
Original Redmine Issue: 72023, https://vlab.ncep.noaa.gov/redmine/issues/72023
Original Date: 2019-12-05
Original Assignee: molly.b.smith
---
We need a dialog that yells at the user if they try to plot matched on two curves with different bins, because that doesn't make sense as far as histograms go.
| priority | ensemble histograms should not plot matched for different bins author name molly b smith mollybsmith noaa original redmine issue original date original assignee molly b smith we need a dialog that yells at the user if they try to plot matched on two curves with different bins because that doesn t make sense as far as histograms go | 1 |
4,764 | 2,563,590,676 | IssuesEvent | 2015-02-06 14:17:59 | pmem/issues | https://api.github.com/repos/pmem/issues | closed | make: make install does not work | Exposure: Medium Priority: 3 medium Type: Bug | make install returns compilation error as below:
Steps to reproduce:
1. make clean
2. make clobber
3. make install
Expected result:
NVML libraries should be installed in system
Actual result:
Compilation error:
(...)
make[2]: Entering directory `/home/nuser/Repos/nvml/src/libvmem'
cc -c -o ../nondebug/libvmem/libvmem.o -std=gnu99 -Wall -Werror -pthread -DSRCVERSION=\"0.1+b10-5-ged448c5\" -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 -I../include -I../common/ -I/home/nuser/Repos/nvml/src/jemalloc/include/jemalloc -I../nondebug/jemalloc/include/jemalloc -fPIC libvmem.c
libvmem.c:39:22: fatal error: jemalloc.h: No such file or directory
#include "jemalloc.h"
^
compilation terminated.
make[2]: *** [../nondebug/libvmem/libvmem.o] Error 1
make[2]: Leaving directory `/home/nuser/Repos/nvml/src/libvmem'
make[1]: *** [libvmem-install] Error 2
make[1]: Leaving directory `/home/nuser/Repos/nvml/src'
make: *** [install] Error 2
| 1.0 | make: make install does not work - make install returns compilation error as below:
Steps to reproduce:
1. make clean
2. make clobber
3. make install
Expected result:
NVML libraries should be installed in system
Actual result:
Compilation error:
(...)
make[2]: Entering directory `/home/nuser/Repos/nvml/src/libvmem'
cc -c -o ../nondebug/libvmem/libvmem.o -std=gnu99 -Wall -Werror -pthread -DSRCVERSION=\"0.1+b10-5-ged448c5\" -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 -I../include -I../common/ -I/home/nuser/Repos/nvml/src/jemalloc/include/jemalloc -I../nondebug/jemalloc/include/jemalloc -fPIC libvmem.c
libvmem.c:39:22: fatal error: jemalloc.h: No such file or directory
#include "jemalloc.h"
^
compilation terminated.
make[2]: *** [../nondebug/libvmem/libvmem.o] Error 1
make[2]: Leaving directory `/home/nuser/Repos/nvml/src/libvmem'
make[1]: *** [libvmem-install] Error 2
make[1]: Leaving directory `/home/nuser/Repos/nvml/src'
make: *** [install] Error 2
| priority | make make install does not work make install returns compilation error as below steps to reproduce make clean make clobber make install expected result nvml libraries should be installed in system actual result compilation error make entering directory home nuser repos nvml src libvmem cc c o nondebug libvmem libvmem o std wall werror pthread dsrcversion u fortify source d fortify source i include i common i home nuser repos nvml src jemalloc include jemalloc i nondebug jemalloc include jemalloc fpic libvmem c libvmem c fatal error jemalloc h no such file or directory include jemalloc h compilation terminated make error make leaving directory home nuser repos nvml src libvmem make error make leaving directory home nuser repos nvml src make error | 1 |
830,961 | 32,032,824,814 | IssuesEvent | 2023-09-22 13:27:42 | Benjamin-Loison/YouTube-operational-API | https://api.github.com/repos/Benjamin-Loison/YouTube-operational-API | closed | https://yt.lemnoslife.com/noKey/ gives HTTP 500 error after few requests | bug waiting details official instance medium priority quick | https://yt.lemnoslife.com/noKey/ gives HTTP 500 error after like 10 simple requests, like /playlists. If you retry request, it will allow another 10 requests. It started recently, previously all was fine. 500 request takes 15 or more seconds, looks like timeout. | 1.0 | https://yt.lemnoslife.com/noKey/ gives HTTP 500 error after few requests - https://yt.lemnoslife.com/noKey/ gives HTTP 500 error after like 10 simple requests, like /playlists. If you retry request, it will allow another 10 requests. It started recently, previously all was fine. 500 request takes 15 or more seconds, looks like timeout. | priority | gives http error after few requests gives http error after like simple requests like playlists if you retry request it will allow another requests it started recently previously all was fine request takes or more seconds looks like timeout | 1 |
512,221 | 14,890,697,277 | IssuesEvent | 2021-01-20 23:34:14 | awslabs/aws-media-insights-engine | https://api.github.com/repos/awslabs/aws-media-insights-engine | closed | Accept video as input for transcribe operator | component: operator library point: 3 prioritized priority: medium type: enhancement | .//source/operators/transcribe/start_transcribe.py:43: # TODO: Do we want to add support for video? | 1.0 | Accept video as input for transcribe operator - .//source/operators/transcribe/start_transcribe.py:43: # TODO: Do we want to add support for video? | priority | accept video as input for transcribe operator source operators transcribe start transcribe py todo do we want to add support for video | 1 |
639,548 | 20,757,630,443 | IssuesEvent | 2022-03-15 13:39:01 | erlang/otp | https://api.github.com/repos/erlang/otp | closed | ERL-1101: An application crashes with bad_return error when top-level supervisor returns 'ignore' atom | team:VM bug priority:medium | Original reporter: `JIRAUSER12801`
Affected version: `OTP-22.1`
Component: `Not Specified`
Migrated from: https://bugs.erlang.org/browse/ERL-1101
---
According to the docs, supervisor, when starting, can either return a `{ok, {SupFlags, [ChildSpec]}}` tuple or an atom 'ignore' ([doc](https://www.erlang.org/doc/man/supervisor.html#Module:init-1)). And this works perfect for any standalone supervisors started by hand or by other supervisor.
Problems start when you try to use `ignore` keyword for a top-level supervisor of an application. Like in any usual configuration, which has been generated from the template:
```
-module(app_app).
-behaviour(application).
-export([start/2, stop/1]).
start(_StartType, _StartArgs) ->
app_sup:start_link().
stop(_State) ->
ok.
```
Plus custom supervisor:
```
-module(app_sup).
-behaviour(supervisor).
-export([start_link/0]).
-export([init/1]).
-define(SERVER, ?MODULE).
start_link() ->
supervisor:start_link({local, ?SERVER}, ?MODULE, []).
init([]) ->
ignore.
```
Launching such degenerate application explodes with `bad_return` error and scary crash report logs:
```
=CRASH REPORT==== 25-Nov-2019::09:01:57.339059 ===
crasher:
initial call: application_master:init/4
pid: <0.129.0>
registered_name: []
exception exit: {bad_return,{{app_app,start,[normal,[]]},ignore}}
in function application_master:init/4 (application_master.erl, line 138)
ancestors: [<0.128.0>]
message_queue_len: 1
messages: [{'EXIT',<0.130.0>,normal}]
links: [<0.128.0>,<0.43.0>]
dictionary: []
trap_exit: true
status: running
heap_size: 376
stack_size: 27
reductions: 207
neighbours:===> Failed to boot app for reason {bad_return,
{{app_app,start,[normal,[]]},
ignore}}
=INFO REPORT==== 25-Nov-2019::09:01:57.342105 ===
application: app
exited: {bad_return,{{app_app,start,[normal,[]]},ignore}}
type: temporary
```
And yes, this is not entirely a bug, rather a certain inconsistency in OTP. An application without a top-level supervisor should not be started regardless, but the returned error, for sure could be handled in a better way. | 1.0 | ERL-1101: An application crashes with bad_return error when top-level supervisor returns 'ignore' atom - Original reporter: `JIRAUSER12801`
Affected version: `OTP-22.1`
Component: `Not Specified`
Migrated from: https://bugs.erlang.org/browse/ERL-1101
---
According to the docs, supervisor, when starting, can either return a `{ok, {SupFlags, [ChildSpec]}}` tuple or an atom 'ignore' ([doc](https://www.erlang.org/doc/man/supervisor.html#Module:init-1)). And this works perfect for any standalone supervisors started by hand or by other supervisor.
Problems start when you try to use `ignore` keyword for a top-level supervisor of an application. Like in any usual configuration, which has been generated from the template:
```
-module(app_app).
-behaviour(application).
-export([start/2, stop/1]).
start(_StartType, _StartArgs) ->
app_sup:start_link().
stop(_State) ->
ok.
```
Plus custom supervisor:
```
-module(app_sup).
-behaviour(supervisor).
-export([start_link/0]).
-export([init/1]).
-define(SERVER, ?MODULE).
start_link() ->
supervisor:start_link({local, ?SERVER}, ?MODULE, []).
init([]) ->
ignore.
```
Launching such degenerate application explodes with `bad_return` error and scary crash report logs:
```
=CRASH REPORT==== 25-Nov-2019::09:01:57.339059 ===
crasher:
initial call: application_master:init/4
pid: <0.129.0>
registered_name: []
exception exit: {bad_return,{{app_app,start,[normal,[]]},ignore}}
in function application_master:init/4 (application_master.erl, line 138)
ancestors: [<0.128.0>]
message_queue_len: 1
messages: [{'EXIT',<0.130.0>,normal}]
links: [<0.128.0>,<0.43.0>]
dictionary: []
trap_exit: true
status: running
heap_size: 376
stack_size: 27
reductions: 207
neighbours:===> Failed to boot app for reason {bad_return,
{{app_app,start,[normal,[]]},
ignore}}
=INFO REPORT==== 25-Nov-2019::09:01:57.342105 ===
application: app
exited: {bad_return,{{app_app,start,[normal,[]]},ignore}}
type: temporary
```
And yes, this is not entirely a bug, rather a certain inconsistency in OTP. An application without a top-level supervisor should not be started regardless, but the returned error, for sure could be handled in a better way. | priority | erl an application crashes with bad return error when top level supervisor returns ignore atom original reporter affected version otp component not specified migrated from according to the docs supervisor when starting can either return a ok supflags tuple or an atom ignore and this works perfect for any standalone supervisors started by hand or by other supervisor problems start when you try to use ignore keyword for a top level supervisor of an application like in any usual configuration which has been generated from the template module app app behaviour application export start starttype startargs app sup start link stop state ok plus custom supervisor module app sup behaviour supervisor export export define server module start link supervisor start link local server module init ignore launching such degenerate application explodes with bad return error and scary crash report logs crash report nov crasher initial call application master init pid registered name exception exit bad return app app start ignore in function application master init application master erl line ancestors message queue len messages links dictionary trap exit true status running heap size stack size reductions neighbours failed to boot app for reason bad return app app start ignore info report nov application app exited bad return app app start ignore type temporary and yes this is not entirely a bug rather a certain inconsistency in otp an application without a top level supervisor should not be started regardless but the returned error for sure could be handled in a better way | 1 |
126,030 | 4,971,651,320 | IssuesEvent | 2016-12-05 19:18:58 | SIU-CS/BarGame-Production | https://api.github.com/repos/SIU-CS/BarGame-Production | closed | Leveling Up | Priority-Medium Product Backlog | I want to earn experience points by completing quests and winning duels which will lead to me leveling up. When I level up I want my stats to increase.
| 1.0 | Leveling Up - I want to earn experience points by completing quests and winning duels which will lead to me leveling up. When I level up I want my stats to increase.
| priority | leveling up i want to earn experience points by completing quests and winning duels which will lead to me leveling up when i level up i want my stats to increase | 1 |
802,807 | 29,046,713,158 | IssuesEvent | 2023-05-13 17:00:34 | iGabyTM/guihelper | https://api.github.com/repos/iGabyTM/guihelper | closed | /guihelper reload not showing message & not getting changes from /settings/DeluxeMenus.yml | bug priority: medium | Ahoy!
When using `/guihelper reload` there is no feedback message the plugin has reloaded in-game or in console.
Its also not picking up changes in `/settings/DeluxeMenus.yml`
I changed my `externalMenusLocation` and reloaded, but it kept saving the data in what it was before. | 1.0 | /guihelper reload not showing message & not getting changes from /settings/DeluxeMenus.yml - Ahoy!
When using `/guihelper reload` there is no feedback message the plugin has reloaded in-game or in console.
Its also not picking up changes in `/settings/DeluxeMenus.yml`
I changed my `externalMenusLocation` and reloaded, but it kept saving the data in what it was before. | priority | guihelper reload not showing message not getting changes from settings deluxemenus yml ahoy when using guihelper reload there is no feedback message the plugin has reloaded in game or in console its also not picking up changes in settings deluxemenus yml i changed my externalmenuslocation and reloaded but it kept saving the data in what it was before | 1 |
249,661 | 7,964,490,271 | IssuesEvent | 2018-07-13 21:43:29 | dmusican/Elegit | https://api.github.com/repos/dmusican/Elegit | closed | Lack of error message when trying to commit when there are unmerged files | bug priority medium | When you try to commit a file (even one without the conflict) when there exists a file with a conflict that has not been dealt with, a notification to the user should be shown. This isn't allowed when using the command line either, so we need a clear error to the user.
Also, an error is thrown in CommitController line 145, but not caught/dealt with when this happens.
To replicate, create some kind of conflict so the repo state is MERGING and then attempt to make a commit. | 1.0 | Lack of error message when trying to commit when there are unmerged files - When you try to commit a file (even one without the conflict) when there exists a file with a conflict that has not been dealt with, a notification to the user should be shown. This isn't allowed when using the command line either, so we need a clear error to the user.
Also, an error is thrown in CommitController line 145, but not caught/dealt with when this happens.
To replicate, create some kind of conflict so the repo state is MERGING and then attempt to make a commit. | priority | lack of error message when trying to commit when there are unmerged files when you try to commit a file even one without the conflict when there exists a file with a conflict that has not been dealt with a notification to the user should be shown this isn t allowed when using the command line either so we need a clear error to the user also an error is thrown in commitcontroller line but not caught dealt with when this happens to replicate create some kind of conflict so the repo state is merging and then attempt to make a commit | 1 |
25,419 | 2,683,746,600 | IssuesEvent | 2015-03-28 08:35:12 | prikhi/pencil | https://api.github.com/repos/prikhi/pencil | closed | export .png image to *.ep ? | 1 star bug imported Priority-Medium | _From [amar.kar...@sevyamultimedia.com](https://code.google.com/u/108465978154798693472/) on January 17, 2014 06:19:52_
What steps will reproduce the problem? 1. 2. 3. What is the expected output? What do you see instead? *.ep file What version of the product are you using? On what operating system? Please provide any additional information below.
_Original issue: http://code.google.com/p/evoluspencil/issues/detail?id=615_ | 1.0 | export .png image to *.ep ? - _From [amar.kar...@sevyamultimedia.com](https://code.google.com/u/108465978154798693472/) on January 17, 2014 06:19:52_
What steps will reproduce the problem? 1. 2. 3. What is the expected output? What do you see instead? *.ep file What version of the product are you using? On what operating system? Please provide any additional information below.
_Original issue: http://code.google.com/p/evoluspencil/issues/detail?id=615_ | priority | export png image to ep from on january what steps will reproduce the problem what is the expected output what do you see instead ep file what version of the product are you using on what operating system please provide any additional information below original issue | 1 |
4,035 | 2,544,722,966 | IssuesEvent | 2015-01-29 12:22:55 | pychess/pychess | https://api.github.com/repos/pychess/pychess | closed | Avahi support | enhancement imported Milestone-Release2.0 Priority-Medium | _From [seta...@gmail.com](https://code.google.com/u/111855164024814721274/) on September 03, 2006 22:38:22_
Future Avahi support would make PyChess a must for playing chess in a LAN.
Something like show other available Human players, when clicking in 'New
Game', and may be the possibility to watch other player's game.
_Original issue: http://code.google.com/p/pychess/issues/detail?id=25_ | 1.0 | Avahi support - _From [seta...@gmail.com](https://code.google.com/u/111855164024814721274/) on September 03, 2006 22:38:22_
Future Avahi support would make PyChess a must for playing chess in a LAN.
Something like show other available Human players, when clicking in 'New
Game', and may be the possibility to watch other player's game.
_Original issue: http://code.google.com/p/pychess/issues/detail?id=25_ | priority | avahi support from on september future avahi support would make pychess a must for playing chess in a lan something like show other available human players when clicking in new game and may be the possibility to watch other player s game original issue | 1 |
653,966 | 21,632,180,308 | IssuesEvent | 2022-05-05 10:53:32 | pystardust/ani-cli | https://api.github.com/repos/pystardust/ani-cli | closed | cryptographic incompatibility with libressl | type: bug priority 2: medium os: BSD | **Metadata**
Version: latest from `master` branch; commit `48f2e20042945ee5298d92e6fab1cd1b21c414ee` (2.1.4)
OS: OpenBSD 7.1-beta
Shell: `/bin/sh` (`pdksh`)
Anime: Lain :)
**Describe the bug**
Guessing from the older reports and from the error message, it seems that the provider's keys have changed?
**Steps To Reproduce**
For example, Lain :)
1. Run `ani-cli -d lain`
2. Choose 3 (Serial Experiments Lain)
3. Choose any #, i've tested with 5, 6, 7
**Expected behavior**
The script usually does work, even while using OpenBSD, with it's default LibreSSL and `pdksh` preferences. (btw, the script does in fact load with `pdksh`, I don't have `bash` installed on my system) I guess the answer to this is "it should work".
**Screenshots**
```
Loading episode 7...
bad decrypt
9159946231440:error:06FFF06D:digital envelope routines:CRYPTO_internal:wrong final block length:/usr/src/lib/libcrypto/evp/evp_enc.c:540:
Downloading episode 7 ...
: No such file or directory
Download failed episode: 007 , please retry or check your internet connection
(n) next
(p) previous
(r) replay
(s) select
(q) exit
> q
``` | 1.0 | cryptographic incompatibility with libressl - **Metadata**
Version: latest from `master` branch; commit `48f2e20042945ee5298d92e6fab1cd1b21c414ee` (2.1.4)
OS: OpenBSD 7.1-beta
Shell: `/bin/sh` (`pdksh`)
Anime: Lain :)
**Describe the bug**
Guessing from the older reports and from the error message, it seems that the provider's keys have changed?
**Steps To Reproduce**
For example, Lain :)
1. Run `ani-cli -d lain`
2. Choose 3 (Serial Experiments Lain)
3. Choose any #, i've tested with 5, 6, 7
**Expected behavior**
The script usually does work, even while using OpenBSD, with it's default LibreSSL and `pdksh` preferences. (btw, the script does in fact load with `pdksh`, I don't have `bash` installed on my system) I guess the answer to this is "it should work".
**Screenshots**
```
Loading episode 7...
bad decrypt
9159946231440:error:06FFF06D:digital envelope routines:CRYPTO_internal:wrong final block length:/usr/src/lib/libcrypto/evp/evp_enc.c:540:
Downloading episode 7 ...
: No such file or directory
Download failed episode: 007 , please retry or check your internet connection
(n) next
(p) previous
(r) replay
(s) select
(q) exit
> q
``` | priority | cryptographic incompatibility with libressl metadata version latest from master branch commit os openbsd beta shell bin sh pdksh anime lain describe the bug guessing from the older reports and from the error message it seems that the provider s keys have changed steps to reproduce for example lain run ani cli d lain choose serial experiments lain choose any i ve tested with expected behavior the script usually does work even while using openbsd with it s default libressl and pdksh preferences btw the script does in fact load with pdksh i don t have bash installed on my system i guess the answer to this is it should work screenshots loading episode bad decrypt error digital envelope routines crypto internal wrong final block length usr src lib libcrypto evp evp enc c downloading episode no such file or directory download failed episode please retry or check your internet connection n next p previous r replay s select q exit q | 1 |
84,202 | 3,655,192,859 | IssuesEvent | 2016-02-17 15:31:57 | ClearPoint-Strategy/wp-clearpoint | https://api.github.com/repos/ClearPoint-Strategy/wp-clearpoint | closed | Highcharts JS and other feedback from Ft Collins IT team | priority:medium type:bug | Hi Steven,
Jolene sent me a few points of feedback from the Fort Collins IT team, and I didn't understand the following:
- "The HighCharts JS library is being loaded twice, causing JavaScript errors in some browsers."
- "We need to index this site with our search appliance so we can return search results on our website. Until we point our search appliance at this site we won’t know if it will properly crawl URLs identified inside ‘onclick’ events. If not, we may need those onclick events to get changed to anchor tags. Search engines other than Google may also have a hard time crawling links that use onclick events instead of anchor tags."
- "Is there a RSS feed available for this site? It would make things easier for us to consume the feed rather than manually updating content on our end."
Do you know what any of these mean, or how to resolve them? They want to go live Thursday or Friday, so I'd like to resolve these as soon as we can.
Thanks!
Catherine | 1.0 | Highcharts JS and other feedback from Ft Collins IT team - Hi Steven,
Jolene sent me a few points of feedback from the Fort Collins IT team, and I didn't understand the following:
- "The HighCharts JS library is being loaded twice, causing JavaScript errors in some browsers."
- "We need to index this site with our search appliance so we can return search results on our website. Until we point our search appliance at this site we won’t know if it will properly crawl URLs identified inside ‘onclick’ events. If not, we may need those onclick events to get changed to anchor tags. Search engines other than Google may also have a hard time crawling links that use onclick events instead of anchor tags."
- "Is there a RSS feed available for this site? It would make things easier for us to consume the feed rather than manually updating content on our end."
Do you know what any of these mean, or how to resolve them? They want to go live Thursday or Friday, so I'd like to resolve these as soon as we can.
Thanks!
Catherine | priority | highcharts js and other feedback from ft collins it team hi steven jolene sent me a few points of feedback from the fort collins it team and i didn t understand the following the highcharts js library is being loaded twice causing javascript errors in some browsers we need to index this site with our search appliance so we can return search results on our website until we point our search appliance at this site we won’t know if it will properly crawl urls identified inside ‘onclick’ events if not we may need those onclick events to get changed to anchor tags search engines other than google may also have a hard time crawling links that use onclick events instead of anchor tags is there a rss feed available for this site it would make things easier for us to consume the feed rather than manually updating content on our end do you know what any of these mean or how to resolve them they want to go live thursday or friday so i d like to resolve these as soon as we can thanks catherine | 1 |
667,681 | 22,496,309,661 | IssuesEvent | 2022-06-23 07:54:24 | space-wizards/space-station-14 | https://api.github.com/repos/space-wizards/space-station-14 | closed | Cargo item queries | Issue: Bug Priority: 2-Before Release Difficulty: 2-Medium | Some of the items seem sussy on selling. It might just be any BaseItem inheritors or idk. | 1.0 | Cargo item queries - Some of the items seem sussy on selling. It might just be any BaseItem inheritors or idk. | priority | cargo item queries some of the items seem sussy on selling it might just be any baseitem inheritors or idk | 1 |
333,563 | 10,128,544,420 | IssuesEvent | 2019-08-01 13:00:58 | CosmiQ/solaris | https://api.github.com/repos/CosmiQ/solaris | closed | 'MultiLineString' error in vector_tiler | Difficulty: Medium Priority: Medium Type: bug | Attempting to tile a vector that is composed only of LineStrings (no MultiLineStrings). I get the error below. Still digging in, but perhaps the tile_bounds from raster_tiler has multilinestrings?
File "/opt/conda/envs/cresi/lib/python3.6/site-packages/solaris/tile/vector_tile.py", line 103, in tile
tile_gdf.to_file(out_path, driver='GeoJSON')
File "/opt/conda/envs/cresi/lib/python3.6/site-packages/geopandas/geodataframe.py", line 413, in to_file
to_file(self, filename, driver, schema, **kwargs)
File "/opt/conda/envs/cresi/lib/python3.6/site-packages/geopandas/io/file.py", line 117, in to_file
colxn.writerecords(df.iterfeatures())
File "/opt/conda/envs/cresi/lib/python3.6/site-packages/fiona/collection.py", line 347, in writerecords
self.session.writerecs(records, self)
File "fiona/ogrext.pyx", line 1223, in fiona.ogrext.WritingSession.writerecs
fiona.errors.GeometryTypeValidationError: Record's geometry type does not match collection schema's geometry type: 'MultiLineString' != 'LineString'
| 1.0 | 'MultiLineString' error in vector_tiler - Attempting to tile a vector that is composed only of LineStrings (no MultiLineStrings). I get the error below. Still digging in, but perhaps the tile_bounds from raster_tiler has multilinestrings?
File "/opt/conda/envs/cresi/lib/python3.6/site-packages/solaris/tile/vector_tile.py", line 103, in tile
tile_gdf.to_file(out_path, driver='GeoJSON')
File "/opt/conda/envs/cresi/lib/python3.6/site-packages/geopandas/geodataframe.py", line 413, in to_file
to_file(self, filename, driver, schema, **kwargs)
File "/opt/conda/envs/cresi/lib/python3.6/site-packages/geopandas/io/file.py", line 117, in to_file
colxn.writerecords(df.iterfeatures())
File "/opt/conda/envs/cresi/lib/python3.6/site-packages/fiona/collection.py", line 347, in writerecords
self.session.writerecs(records, self)
File "fiona/ogrext.pyx", line 1223, in fiona.ogrext.WritingSession.writerecs
fiona.errors.GeometryTypeValidationError: Record's geometry type does not match collection schema's geometry type: 'MultiLineString' != 'LineString'
| priority | multilinestring error in vector tiler attempting to tile a vector that is composed only of linestrings no multilinestrings i get the error below still digging in but perhaps the tile bounds from raster tiler has multilinestrings file opt conda envs cresi lib site packages solaris tile vector tile py line in tile tile gdf to file out path driver geojson file opt conda envs cresi lib site packages geopandas geodataframe py line in to file to file self filename driver schema kwargs file opt conda envs cresi lib site packages geopandas io file py line in to file colxn writerecords df iterfeatures file opt conda envs cresi lib site packages fiona collection py line in writerecords self session writerecs records self file fiona ogrext pyx line in fiona ogrext writingsession writerecs fiona errors geometrytypevalidationerror record s geometry type does not match collection schema s geometry type multilinestring linestring | 1 |
71,369 | 3,356,122,426 | IssuesEvent | 2015-11-18 19:10:48 | washingtontrails/vms | https://api.github.com/repos/washingtontrails/vms | closed | MBP: Make avatar image a circle not oval. | Enhancement MBP BUDGET Medium Priority Plone Reviewing | Change from oval to default circle presentation of icon on main profile AND (more importantly) on trip report list displays.
This is lower priority, but enough people have repsonded to it negatively that I would like to address it. We will default to a circle (which happens when people upload a square image) and add a bit of help text around the profile image upload to say that a square image works best.
Add text: "Square image works best".
| 1.0 | MBP: Make avatar image a circle not oval. - Change from oval to default circle presentation of icon on main profile AND (more importantly) on trip report list displays.
This is lower priority, but enough people have repsonded to it negatively that I would like to address it. We will default to a circle (which happens when people upload a square image) and add a bit of help text around the profile image upload to say that a square image works best.
Add text: "Square image works best".
| priority | mbp make avatar image a circle not oval change from oval to default circle presentation of icon on main profile and more importantly on trip report list displays this is lower priority but enough people have repsonded to it negatively that i would like to address it we will default to a circle which happens when people upload a square image and add a bit of help text around the profile image upload to say that a square image works best add text square image works best | 1 |
349,509 | 10,470,634,200 | IssuesEvent | 2019-09-23 04:46:45 | malcolmjc/Stat-Tracking-App | https://api.github.com/repos/malcolmjc/Stat-Tracking-App | closed | Mobile Friendly | EPIC Frontend Medium Priority UI | As a user, I want the site to be mobile friendly so that I can use it on my phone. | 1.0 | Mobile Friendly - As a user, I want the site to be mobile friendly so that I can use it on my phone. | priority | mobile friendly as a user i want the site to be mobile friendly so that i can use it on my phone | 1 |
668,835 | 22,599,176,682 | IssuesEvent | 2022-06-29 07:34:44 | theiagen/public_health_bacterial_genomics | https://api.github.com/repos/theiagen/public_health_bacterial_genomics | closed | add genotyphi to theiaprok_illumina_pe wf | priority:3 (medium) | Started a branch `cjk-genotyphi` to get this started
Planning to only run `genotyphi` on samples where either SeqSero2 or SISTR find a serotype of Typhi
This will use the soon-to-be-released staphb docker image for `mykrobe` and `genotyphi`
See here for usage of the tool: https://github.com/StaPH-B/docker-builds/blob/4267433bee23ac5ca6c8cb0f818a48a7e6507c22/mykrobe/README.md
2 steps - run Mykrobe to produce, then parse outputs w/ genotyphi script to produce a TSV.
Things to float to Terra table as outputs:
- mykrobe output JSON
- genotyphi TSV
- genotyphi final predicted lineage
- others?!?
| 1.0 | add genotyphi to theiaprok_illumina_pe wf - Started a branch `cjk-genotyphi` to get this started
Planning to only run `genotyphi` on samples where either SeqSero2 or SISTR find a serotype of Typhi
This will use the soon-to-be-released staphb docker image for `mykrobe` and `genotyphi`
See here for usage of the tool: https://github.com/StaPH-B/docker-builds/blob/4267433bee23ac5ca6c8cb0f818a48a7e6507c22/mykrobe/README.md
2 steps - run Mykrobe to produce, then parse outputs w/ genotyphi script to produce a TSV.
Things to float to Terra table as outputs:
- mykrobe output JSON
- genotyphi TSV
- genotyphi final predicted lineage
- others?!?
| priority | add genotyphi to theiaprok illumina pe wf started a branch cjk genotyphi to get this started planning to only run genotyphi on samples where either or sistr find a serotype of typhi this will use the soon to be released staphb docker image for mykrobe and genotyphi see here for usage of the tool steps run mykrobe to produce then parse outputs w genotyphi script to produce a tsv things to float to terra table as outputs mykrobe output json genotyphi tsv genotyphi final predicted lineage others | 1 |
396,391 | 11,708,790,473 | IssuesEvent | 2020-03-08 15:16:45 | huridocs/uwazi | https://api.github.com/repos/huridocs/uwazi | closed | Notification message appears over button | Bug Priority: Medium | When creating several entities in a row in uploads, the notification pop-up appears over the "New entity" button. The user is forced to wait until the message is gone to operate.
| 1.0 | Notification message appears over button - When creating several entities in a row in uploads, the notification pop-up appears over the "New entity" button. The user is forced to wait until the message is gone to operate.
| priority | notification message appears over button when creating several entities in a row in uploads the notification pop up appears over the new entity button the user is forced to wait until the message is gone to operate | 1 |
771,743 | 27,091,219,813 | IssuesEvent | 2023-02-14 21:14:54 | tallyhowallet/extension | https://api.github.com/repos/tallyhowallet/extension | closed | Don't change network for dApps when the network is changed for the extension | Type: Bug Priority: Medium | * https://matrix.to/#/!WZRftnsYNnOtzOGuZy:thesis.co/$AO0U9C2IkgGRwR4m0Q8bX4K5B_LstdurVxbJi9cSR2k?via=thesis.co&via=matrix.org
* https://github.com/tallycash/extension/blob/c934f88f075b0ca71de889923d02db193549902f/background/services/provider-bridge/index.ts#L268
⚠️ My original assessment was wrong! For the real reason see https://github.com/tallycash/extension/pull/1963#issuecomment-1217990405 ⚠️ | 1.0 | Don't change network for dApps when the network is changed for the extension - * https://matrix.to/#/!WZRftnsYNnOtzOGuZy:thesis.co/$AO0U9C2IkgGRwR4m0Q8bX4K5B_LstdurVxbJi9cSR2k?via=thesis.co&via=matrix.org
* https://github.com/tallycash/extension/blob/c934f88f075b0ca71de889923d02db193549902f/background/services/provider-bridge/index.ts#L268
⚠️ My original assessment was wrong! For the real reason see https://github.com/tallycash/extension/pull/1963#issuecomment-1217990405 ⚠️ | priority | don t change network for dapps when the network is changed for the extension ⚠️ my original assessment was wrong for the real reason see ⚠️ | 1 |
57,786 | 3,083,786,533 | IssuesEvent | 2015-08-24 11:18:55 | pavel-pimenov/flylinkdc-r5xx | https://api.github.com/repos/pavel-pimenov/flylinkdc-r5xx | closed | Не открывается файл-лист - SimpleXMLException: Directory missing name attribute | bug imported Priority-Medium | _From [Pavel.Pimenov@gmail.com](https://code.google.com/u/Pavel.Pimenov@gmail.com/) on July 22, 2013 18:07:43_
Пример файл-листа http://yadi.sk/d/-1ctDoLm75jnE ---------------------------
FlylinkDC++
\---------------------------
{2K734DCBIHYQ7OOYMJ4BTMW4ST4G3WXX5DXVOZY}: SimpleXMLException: Directory missing name attribute
Send the corrupted file 'D:\!ffffffffffffffff\[PNZ]F_E_D_or.2K734DCBIHYQ7OOYMJ4BTMW4ST4G3WXX5DXVOZY.xml.bz2' to e-mail ppa74@ya.ru for analyze and correct the error!
\---------------------------
ОК
\---------------------------
_Original issue: http://code.google.com/p/flylinkdc/issues/detail?id=1101_ | 1.0 | Не открывается файл-лист - SimpleXMLException: Directory missing name attribute - _From [Pavel.Pimenov@gmail.com](https://code.google.com/u/Pavel.Pimenov@gmail.com/) on July 22, 2013 18:07:43_
Пример файл-листа http://yadi.sk/d/-1ctDoLm75jnE ---------------------------
FlylinkDC++
\---------------------------
{2K734DCBIHYQ7OOYMJ4BTMW4ST4G3WXX5DXVOZY}: SimpleXMLException: Directory missing name attribute
Send the corrupted file 'D:\!ffffffffffffffff\[PNZ]F_E_D_or.2K734DCBIHYQ7OOYMJ4BTMW4ST4G3WXX5DXVOZY.xml.bz2' to e-mail ppa74@ya.ru for analyze and correct the error!
\---------------------------
ОК
\---------------------------
_Original issue: http://code.google.com/p/flylinkdc/issues/detail?id=1101_ | priority | не открывается файл лист simplexmlexception directory missing name attribute from on july пример файл листа flylinkdc simplexmlexception directory missing name attribute send the corrupted file d ffffffffffffffff f e d or xml to e mail ya ru for analyze and correct the error ок original issue | 1 |
364,192 | 10,760,360,255 | IssuesEvent | 2019-10-31 18:26:04 | USGS-Astrogeology/PyHAT_Point_Spectra_GUI | https://api.github.com/repos/USGS-Astrogeology/PyHAT_Point_Spectra_GUI | closed | Live plotting, when the user updates the UI display the resulting plot | Difficulty Intermediate Plotting Priority: Medium enhancement | If possible add interactivity to the plot. | 1.0 | Live plotting, when the user updates the UI display the resulting plot - If possible add interactivity to the plot. | priority | live plotting when the user updates the ui display the resulting plot if possible add interactivity to the plot | 1 |
77,113 | 3,506,262,174 | IssuesEvent | 2016-01-08 05:04:34 | OregonCore/OregonCore | https://api.github.com/repos/OregonCore/OregonCore | closed | [Shaman] Elementals (BB #174) | migrated Priority: Medium Type: Bug | This issue was migrated from bitbucket.
**Original Reporter:** niyo
**Original Date:** 09.06.2010 09:40:25 GMT+0000
**Original Priority:** major
**Original Type:** bug
**Original State:** resolved
**Direct Link:** https://bitbucket.org/oregon/oregoncore/issues/174
<hr>
The summoned elementals have no spells, are not dying if the totem died and don't stay at near the totem (they are following the shaman who summoned the totem) | 1.0 | [Shaman] Elementals (BB #174) - This issue was migrated from bitbucket.
**Original Reporter:** niyo
**Original Date:** 09.06.2010 09:40:25 GMT+0000
**Original Priority:** major
**Original Type:** bug
**Original State:** resolved
**Direct Link:** https://bitbucket.org/oregon/oregoncore/issues/174
<hr>
The summoned elementals have no spells, are not dying if the totem died and don't stay at near the totem (they are following the shaman who summoned the totem) | priority | elementals bb this issue was migrated from bitbucket original reporter niyo original date gmt original priority major original type bug original state resolved direct link the summoned elementals have no spells are not dying if the totem died and don t stay at near the totem they are following the shaman who summoned the totem | 1 |
462,165 | 13,242,233,976 | IssuesEvent | 2020-08-19 09:26:25 | CHOMPStation2/CHOMPStation2 | https://api.github.com/repos/CHOMPStation2/CHOMPStation2 | closed | No join announcement when spawning on shuttle | Bug Medium Priority | #### Brief description of the issue
Whenever someone joins the station through the shuttle, their join announcement doesn't get played to the station.
#### What you expected to happen
You'd hear when someone joins via shuttle, while you're on station
#### What actually happened
The join announcement only gets played to them and maybe other people on the shuttle, and not to everyone on the station.
#### Steps to reproduce
- Exist on station
- Have someone join station through shuttle
- Be disappointed that you'll never know they showed up unless they speak
#### Code Revision
- (Found using the "Show Server Revision" verb under the OOC tab.)
#### Anything else you may wish to add:
- (Location if it's a mapping issue, screenshots, sprites, etc.)
| 1.0 | No join announcement when spawning on shuttle - #### Brief description of the issue
Whenever someone joins the station through the shuttle, their join announcement doesn't get played to the station.
#### What you expected to happen
You'd hear when someone joins via shuttle, while you're on station
#### What actually happened
The join announcement only gets played to them and maybe other people on the shuttle, and not to everyone on the station.
#### Steps to reproduce
- Exist on station
- Have someone join station through shuttle
- Be disappointed that you'll never know they showed up unless they speak
#### Code Revision
- (Found using the "Show Server Revision" verb under the OOC tab.)
#### Anything else you may wish to add:
- (Location if it's a mapping issue, screenshots, sprites, etc.)
| priority | no join announcement when spawning on shuttle brief description of the issue whenever someone joins the station through the shuttle their join announcement doesn t get played to the station what you expected to happen you d hear when someone joins via shuttle while you re on station what actually happened the join announcement only gets played to them and maybe other people on the shuttle and not to everyone on the station steps to reproduce exist on station have someone join station through shuttle be disappointed that you ll never know they showed up unless they speak code revision found using the show server revision verb under the ooc tab anything else you may wish to add location if it s a mapping issue screenshots sprites etc | 1 |
283,052 | 8,713,498,627 | IssuesEvent | 2018-12-07 02:56:18 | aowen87/TicketTester | https://api.github.com/repos/aowen87/TicketTester | closed | Command recording reports PickAttributes instead of GetPickAttributes | bug likelihood medium priority reviewed severity medium | Here is the bug report from Raymond Ryckman (ryckman1@llnl.gov):
Hey Eric,
I have a bug to report in Visit, and I wasnât sure who I should contact. Please forward this on if you know whom it would concern.
I was starting to use the Visit Python scripting functionality, and I was using the Record function. When I changed my Pick settings, the Recorded output was PickAttributes(), which did not work when I tried to run it again later. Looking at the Interface manual, I found that the correct function is GetPickAttributes() and after making that change everything worked fine.
Thanks,
-Raymond
-----------------------REDMINE MIGRATION-----------------------
This ticket was migrated from Redmine. As such, not all
information was able to be captured in the transition. Below is
a complete record of the original redmine ticket.
Ticket number: 2565
Status: Resolved
Project: VisIt
Tracker: Bug
Priority: High
Subject: Command recording reports PickAttributes instead of GetPickAttributes
Assigned to: Kathleen Biagas
Category:
Target version: 2.10.3
Author: Eric Brugger
Start: 03/23/2016
Due date:
% Done: 100
Estimated time: 0.5
Created: 03/23/2016 03:35 pm
Updated: 03/31/2016 05:12 pm
Likelihood: 3 - Occasional
Severity: 3 - Major Irritation
Found in version: 2.10.0
Impact:
Expected Use:
OS: All
Support Group: Any
Description:
Here is the bug report from Raymond Ryckman (ryckman1@llnl.gov):
Hey Eric,
I have a bug to report in Visit, and I wasnât sure who I should contact. Please forward this on if you know whom it would concern.
I was starting to use the Visit Python scripting functionality, and I was using the Record function. When I changed my Pick settings, the Recorded output was PickAttributes(), which did not work when I tried to run it again later. Looking at the Interface manual, I found that the correct function is GetPickAttributes() and after making that change everything worked fine.
Thanks,
-Raymond
Comments:
Added custom method for logging, as the default supplied by xml2python doesn't fit for PickAttributes.M visitpy/visitpy/PyPickAttributes.CM common/state/PickAttributes.codeM common/state/PickAttributes.xml
| 1.0 | Command recording reports PickAttributes instead of GetPickAttributes - Here is the bug report from Raymond Ryckman (ryckman1@llnl.gov):
Hey Eric,
I have a bug to report in Visit, and I wasnât sure who I should contact. Please forward this on if you know whom it would concern.
I was starting to use the Visit Python scripting functionality, and I was using the Record function. When I changed my Pick settings, the Recorded output was PickAttributes(), which did not work when I tried to run it again later. Looking at the Interface manual, I found that the correct function is GetPickAttributes() and after making that change everything worked fine.
Thanks,
-Raymond
-----------------------REDMINE MIGRATION-----------------------
This ticket was migrated from Redmine. As such, not all
information was able to be captured in the transition. Below is
a complete record of the original redmine ticket.
Ticket number: 2565
Status: Resolved
Project: VisIt
Tracker: Bug
Priority: High
Subject: Command recording reports PickAttributes instead of GetPickAttributes
Assigned to: Kathleen Biagas
Category:
Target version: 2.10.3
Author: Eric Brugger
Start: 03/23/2016
Due date:
% Done: 100
Estimated time: 0.5
Created: 03/23/2016 03:35 pm
Updated: 03/31/2016 05:12 pm
Likelihood: 3 - Occasional
Severity: 3 - Major Irritation
Found in version: 2.10.0
Impact:
Expected Use:
OS: All
Support Group: Any
Description:
Here is the bug report from Raymond Ryckman (ryckman1@llnl.gov):
Hey Eric,
I have a bug to report in Visit, and I wasnât sure who I should contact. Please forward this on if you know whom it would concern.
I was starting to use the Visit Python scripting functionality, and I was using the Record function. When I changed my Pick settings, the Recorded output was PickAttributes(), which did not work when I tried to run it again later. Looking at the Interface manual, I found that the correct function is GetPickAttributes() and after making that change everything worked fine.
Thanks,
-Raymond
Comments:
Added custom method for logging, as the default supplied by xml2python doesn't fit for PickAttributes.M visitpy/visitpy/PyPickAttributes.CM common/state/PickAttributes.codeM common/state/PickAttributes.xml
| priority | command recording reports pickattributes instead of getpickattributes here is the bug report from raymond ryckman llnl gov hey eric i have a bug to report in visit and i wasnât sure who i should contact please forward this on if you know whom it would concern i was starting to use the visit python scripting functionality and i was using the record function when i changed my pick settings the recorded output was pickattributes which did not work when i tried to run it again later looking at the interface manual i found that the correct function is getpickattributes and after making that change everything worked fine thanks raymond redmine migration this ticket was migrated from redmine as such not all information was able to be captured in the transition below is a complete record of the original redmine ticket ticket number status resolved project visit tracker bug priority high subject command recording reports pickattributes instead of getpickattributes assigned to kathleen biagas category target version author eric brugger start due date done estimated time created pm updated pm likelihood occasional severity major irritation found in version impact expected use os all support group any description here is the bug report from raymond ryckman llnl gov hey eric i have a bug to report in visit and i wasnât sure who i should contact please forward this on if you know whom it would concern i was starting to use the visit python scripting functionality and i was using the record function when i changed my pick settings the recorded output was pickattributes which did not work when i tried to run it again later looking at the interface manual i found that the correct function is getpickattributes and after making that change everything worked fine thanks raymond comments added custom method for logging as the default supplied by doesn t fit for pickattributes m visitpy visitpy pypickattributes cm common state pickattributes codem common state pickattributes xml | 1 |
270,473 | 8,460,924,284 | IssuesEvent | 2018-10-22 20:15:42 | dojot/dojot | https://api.github.com/repos/dojot/dojot | opened | Change Password: character limit | Priority:Medium Team:Frontend Type:Bug | - When the user is changing their password, the GUI informs that password must be at least 8 characters.
- If user sets 1-7 characters password and submit it, a message is returned by the GUI saying , in Portuguese, that the minimum number of characters that is required are 8.
- The same message appears as ToolTip when the password and confirm password fields are partially populated.
**Expected behavior:** the same behavior as "New Password"
**Affected Version:** 0.3.0-nightly_20181010
| 1.0 | Change Password: character limit - - When the user is changing their password, the GUI informs that password must be at least 8 characters.
- If user sets 1-7 characters password and submit it, a message is returned by the GUI saying , in Portuguese, that the minimum number of characters that is required are 8.
- The same message appears as ToolTip when the password and confirm password fields are partially populated.
**Expected behavior:** the same behavior as "New Password"
**Affected Version:** 0.3.0-nightly_20181010
| priority | change password character limit when the user is changing their password the gui informs that password must be at least characters if user sets characters password and submit it a message is returned by the gui saying in portuguese that the minimum number of characters that is required are the same message appears as tooltip when the password and confirm password fields are partially populated expected behavior the same behavior as new password affected version nightly | 1 |
65,996 | 3,249,426,301 | IssuesEvent | 2015-10-18 05:22:58 | littlefoot32/gitiles | https://api.github.com/repos/littlefoot32/gitiles | closed | API for +log views | auto-migrated Priority-Medium Type-Enhancement | ```
-Support JSON/TEXT format for +log
-Support additional arguments similar to git log, e.g. filtering by author or
date.
```
Original issue reported on code.google.com by `dborowitz@google.com` on 11 Apr 2013 at 7:29 | 1.0 | API for +log views - ```
-Support JSON/TEXT format for +log
-Support additional arguments similar to git log, e.g. filtering by author or
date.
```
Original issue reported on code.google.com by `dborowitz@google.com` on 11 Apr 2013 at 7:29 | priority | api for log views support json text format for log support additional arguments similar to git log e g filtering by author or date original issue reported on code google com by dborowitz google com on apr at | 1 |
619,340 | 19,522,165,045 | IssuesEvent | 2021-12-29 20:52:02 | Vyxal/Vyxal | https://api.github.com/repos/Vyxal/Vyxal | opened | Way to get all elements in a list except for an element at a specified index | enhancement unimplemented priority:medium bugn't | Assuming the command is called `x`: and lists can be declared with `[]`:
```
[1,2,3]0x => [2, 3]
[1,2,3]1x => [1,3]
[1,2,3,1]3x => [1,2,3]
[1,2,3,1]0x => [2,3,1]
``` | 1.0 | Way to get all elements in a list except for an element at a specified index - Assuming the command is called `x`: and lists can be declared with `[]`:
```
[1,2,3]0x => [2, 3]
[1,2,3]1x => [1,3]
[1,2,3,1]3x => [1,2,3]
[1,2,3,1]0x => [2,3,1]
``` | priority | way to get all elements in a list except for an element at a specified index assuming the command is called x and lists can be declared with | 1 |
681,310 | 23,305,166,932 | IssuesEvent | 2022-08-07 22:41:37 | space-wizards/RobustToolbox | https://api.github.com/repos/space-wizards/RobustToolbox | closed | Change physics contact edges from linkedlist to hashset | Issue: Performance Priority: 2-Important Size: Very Small Difficulty: 2-Medium | Currently it does a disgusting iteration which could be significantly faster for bodies that have a lot of contacts.
1/3 of physics is taken up on this in the tumbler test which is what I would consider a worst-case scenario. | 1.0 | Change physics contact edges from linkedlist to hashset - Currently it does a disgusting iteration which could be significantly faster for bodies that have a lot of contacts.
1/3 of physics is taken up on this in the tumbler test which is what I would consider a worst-case scenario. | priority | change physics contact edges from linkedlist to hashset currently it does a disgusting iteration which could be significantly faster for bodies that have a lot of contacts of physics is taken up on this in the tumbler test which is what i would consider a worst case scenario | 1 |
584,629 | 17,460,314,894 | IssuesEvent | 2021-08-06 09:30:12 | ansible-collections/azure | https://api.github.com/repos/ansible-collections/azure | closed | Unable to create application gateway with path based routing | has_pr medium_priority work in | ##### SUMMARY
It is not possible to use `azure_rm_appgateway` with `request_routing_rules -> rule_type = path_based_routing`. When trying to do so, an error is reported that "Request Routing Rule routing must reference a UrlPathMap". However, there is no way to configure a UrlPathMap on `azure_rm_appgateway`.
##### ISSUE TYPE
- Bug Report
##### COMPONENT NAME
azure_rm_appgateway
##### ANSIBLE VERSION
```paste below
ansible 2.10.3
config file = None
configured module search path = ['/Users/ross/.ansible/plugins/modules', '/usr/share/ansible/plugins/modules']
ansible python module location = /usr/local/lib/python3.9/site-packages/ansible
executable location = /usr/local/bin/ansible
python version = 3.9.1 (default, Dec 10 2020, 10:36:35) [Clang 12.0.0 (clang-1200.0.32.27)]
```
##### CONFIGURATION
```paste below
(no output from ansible-config dump --only-changed)
```
##### OS / ENVIRONMENT
Mac OS Big Sur 11.2.2.
##### STEPS TO REPRODUCE
```yaml
---
- name: "Playbook to create necessary application gateway."
hosts: localhost
connection: local
tasks:
- name: "Create application gateway."
azure.azcollection.azure_rm_appgateway:
name: "myapp-gw"
resource_group: "myapp"
sku:
capacity: 1
name: "standard_v2"
tier: "standard_v2"
gateway_ip_configurations:
- name: "appGatewayIpConfig"
subnet:
id: /subscriptions/mysubscription/resourceGroups/myapp/providers/Microsoft.Network/virtualNetworks/myapp-vnet/subnets/default
frontend_ip_configurations:
- name: "public-inbound-ip"
public_ip_address: "myapp-ip"
frontend_ports:
- name: "public-bound-http"
port: 80
backend_address_pools:
- name: "webapp"
backend_addresses:
- fqdn: "myapp-webapp.azurewebsites.net"
backend_http_settings_collection:
- name: "webapp-profile"
port: 443
protocol: https
pick_host_name_from_backend_address: true
http_listeners:
- name: "inbound-http"
frontend_ip_configuration: "public-inbound-ip"
frontend_port: "public-bound-http"
request_routing_rules:
- name: "http-routing"
rule_type: "path_based_routing"
http_listener: "inbound-http"
backend_address_pool: "webapp"
location: "southcentralus"
```
##### EXPECTED RESULTS
It should be possible to use `azure_rm_appgateway` with `rule_type: "path_based_routing"` and provide URL paths for routing.
##### ACTUAL RESULTS
An error is returned that URL path map is not provided.
<!--- Paste verbatim command output between quotes -->
```paste below
fatal: [localhost]: FAILED! => {"changed": false, "msg": "Error creating the Application Gateway instance: Azure Error: ApplicationGatewayRequestRoutingRuleMustReference\nMessage: Request Routing Rule /subscriptions/mysubscription/resourceGroups/myapp/providers/Microsoft.Network/applicationGateways/myapp-gw/requestRoutingRules/http-routing must reference a UrlPathMap."}
```
However, there is no property on the module to be able to configure URL path map.
| 1.0 | Unable to create application gateway with path based routing - ##### SUMMARY
It is not possible to use `azure_rm_appgateway` with `request_routing_rules -> rule_type = path_based_routing`. When trying to do so, an error is reported that "Request Routing Rule routing must reference a UrlPathMap". However, there is no way to configure a UrlPathMap on `azure_rm_appgateway`.
##### ISSUE TYPE
- Bug Report
##### COMPONENT NAME
azure_rm_appgateway
##### ANSIBLE VERSION
```paste below
ansible 2.10.3
config file = None
configured module search path = ['/Users/ross/.ansible/plugins/modules', '/usr/share/ansible/plugins/modules']
ansible python module location = /usr/local/lib/python3.9/site-packages/ansible
executable location = /usr/local/bin/ansible
python version = 3.9.1 (default, Dec 10 2020, 10:36:35) [Clang 12.0.0 (clang-1200.0.32.27)]
```
##### CONFIGURATION
```paste below
(no output from ansible-config dump --only-changed)
```
##### OS / ENVIRONMENT
Mac OS Big Sur 11.2.2.
##### STEPS TO REPRODUCE
```yaml
---
- name: "Playbook to create necessary application gateway."
hosts: localhost
connection: local
tasks:
- name: "Create application gateway."
azure.azcollection.azure_rm_appgateway:
name: "myapp-gw"
resource_group: "myapp"
sku:
capacity: 1
name: "standard_v2"
tier: "standard_v2"
gateway_ip_configurations:
- name: "appGatewayIpConfig"
subnet:
id: /subscriptions/mysubscription/resourceGroups/myapp/providers/Microsoft.Network/virtualNetworks/myapp-vnet/subnets/default
frontend_ip_configurations:
- name: "public-inbound-ip"
public_ip_address: "myapp-ip"
frontend_ports:
- name: "public-bound-http"
port: 80
backend_address_pools:
- name: "webapp"
backend_addresses:
- fqdn: "myapp-webapp.azurewebsites.net"
backend_http_settings_collection:
- name: "webapp-profile"
port: 443
protocol: https
pick_host_name_from_backend_address: true
http_listeners:
- name: "inbound-http"
frontend_ip_configuration: "public-inbound-ip"
frontend_port: "public-bound-http"
request_routing_rules:
- name: "http-routing"
rule_type: "path_based_routing"
http_listener: "inbound-http"
backend_address_pool: "webapp"
location: "southcentralus"
```
##### EXPECTED RESULTS
It should be possible to use `azure_rm_appgateway` with `rule_type: "path_based_routing"` and provide URL paths for routing.
##### ACTUAL RESULTS
An error is returned that URL path map is not provided.
<!--- Paste verbatim command output between quotes -->
```paste below
fatal: [localhost]: FAILED! => {"changed": false, "msg": "Error creating the Application Gateway instance: Azure Error: ApplicationGatewayRequestRoutingRuleMustReference\nMessage: Request Routing Rule /subscriptions/mysubscription/resourceGroups/myapp/providers/Microsoft.Network/applicationGateways/myapp-gw/requestRoutingRules/http-routing must reference a UrlPathMap."}
```
However, there is no property on the module to be able to configure URL path map.
| priority | unable to create application gateway with path based routing summary it is not possible to use azure rm appgateway with request routing rules rule type path based routing when trying to do so an error is reported that request routing rule routing must reference a urlpathmap however there is no way to configure a urlpathmap on azure rm appgateway issue type bug report component name azure rm appgateway ansible version paste below ansible config file none configured module search path ansible python module location usr local lib site packages ansible executable location usr local bin ansible python version default dec configuration paste below no output from ansible config dump only changed os environment mac os big sur steps to reproduce yaml name playbook to create necessary application gateway hosts localhost connection local tasks name create application gateway azure azcollection azure rm appgateway name myapp gw resource group myapp sku capacity name standard tier standard gateway ip configurations name appgatewayipconfig subnet id subscriptions mysubscription resourcegroups myapp providers microsoft network virtualnetworks myapp vnet subnets default frontend ip configurations name public inbound ip public ip address myapp ip frontend ports name public bound http port backend address pools name webapp backend addresses fqdn myapp webapp azurewebsites net backend http settings collection name webapp profile port protocol https pick host name from backend address true http listeners name inbound http frontend ip configuration public inbound ip frontend port public bound http request routing rules name http routing rule type path based routing http listener inbound http backend address pool webapp location southcentralus expected results it should be possible to use azure rm appgateway with rule type path based routing and provide url paths for routing actual results an error is returned that url path map is not provided paste below fatal failed changed false msg error creating the application gateway instance azure error applicationgatewayrequestroutingrulemustreference nmessage request routing rule subscriptions mysubscription resourcegroups myapp providers microsoft network applicationgateways myapp gw requestroutingrules http routing must reference a urlpathmap however there is no property on the module to be able to configure url path map | 1 |
660,277 | 21,959,618,364 | IssuesEvent | 2022-05-24 14:48:19 | UnitTestBot/UTBotJava | https://api.github.com/repos/UnitTestBot/UTBotJava | opened | Support concrete values for enums | enhancement Priority: Medium | We now analyze enum classes static initializers as many others - with a complete analysis of $VALUES array initialization, static fields for enum constants, ordinal, names, etc. But often this analysis is unnecessary - most of the enums do not have complex logic and could be just extracted from runtime. Such extraction can highly improve performance for methods with enum usage.
**Actual behavior**
Enum values are not processed concretely, and UtBotJava generate 0 executions for method `useEnumInDifficultIf ` below:
```java
public int useEnumInDifficultIf(String s) {
if ("TRYIF".equalsIgnoreCase(s)) {
final ManyConstantsEnum[] values = ManyConstantsEnum.values();
return foo(values[0]);
} else {
final ManyConstantsEnum b = B;
return foo(b);
}
}
private int foo(ManyConstantsEnum e) {
if (e.equals(A)) {
return 1;
} else {
return 2;
}
}
enum ManyConstantsEnum {
A, B, C, D, E, F, G, H, I, J, K
}
```
**Expected behavior:**
Simple enums are processed concretely, and 2 executions with 1 and 2 returned values are generated for method `useEnumInDifficultIf`. | 1.0 | Support concrete values for enums - We now analyze enum classes static initializers as many others - with a complete analysis of $VALUES array initialization, static fields for enum constants, ordinal, names, etc. But often this analysis is unnecessary - most of the enums do not have complex logic and could be just extracted from runtime. Such extraction can highly improve performance for methods with enum usage.
**Actual behavior**
Enum values are not processed concretely, and UtBotJava generate 0 executions for method `useEnumInDifficultIf ` below:
```java
public int useEnumInDifficultIf(String s) {
if ("TRYIF".equalsIgnoreCase(s)) {
final ManyConstantsEnum[] values = ManyConstantsEnum.values();
return foo(values[0]);
} else {
final ManyConstantsEnum b = B;
return foo(b);
}
}
private int foo(ManyConstantsEnum e) {
if (e.equals(A)) {
return 1;
} else {
return 2;
}
}
enum ManyConstantsEnum {
A, B, C, D, E, F, G, H, I, J, K
}
```
**Expected behavior:**
Simple enums are processed concretely, and 2 executions with 1 and 2 returned values are generated for method `useEnumInDifficultIf`. | priority | support concrete values for enums we now analyze enum classes static initializers as many others with a complete analysis of values array initialization static fields for enum constants ordinal names etc but often this analysis is unnecessary most of the enums do not have complex logic and could be just extracted from runtime such extraction can highly improve performance for methods with enum usage actual behavior enum values are not processed concretely and utbotjava generate executions for method useenumindifficultif below java public int useenumindifficultif string s if tryif equalsignorecase s final manyconstantsenum values manyconstantsenum values return foo values else final manyconstantsenum b b return foo b private int foo manyconstantsenum e if e equals a return else return enum manyconstantsenum a b c d e f g h i j k expected behavior simple enums are processed concretely and executions with and returned values are generated for method useenumindifficultif | 1 |
374,159 | 11,081,158,343 | IssuesEvent | 2019-12-13 09:10:34 | StrangeLoopGames/EcoIssues | https://api.github.com/repos/StrangeLoopGames/EcoIssues | closed | player report: excavator kicks player out while driving | Investigate Medium Priority Needs Information | player report: excavator kicks player out while driving. Player would not make a bug report | 1.0 | player report: excavator kicks player out while driving - player report: excavator kicks player out while driving. Player would not make a bug report | priority | player report excavator kicks player out while driving player report excavator kicks player out while driving player would not make a bug report | 1 |
168,509 | 6,376,872,162 | IssuesEvent | 2017-08-02 08:40:15 | OpenRefine/OpenRefine | https://api.github.com/repos/OpenRefine/OpenRefine | closed | 500 error when creating custom export | bug duplicate imported priority-Medium | _Original author: Martin.M...@gmail.com (August 27, 2012 01:34:18)_
<b>What steps will reproduce the problem?</b>
I'm working with a program that understand only dos encoded file (ASCII, win 1252 or CP 1252-ISO-8859-1)
I've been trying the custom export with dos format and got an HTTP ERROR 500.
See screenshot for more details
<b>What is the expected output? What do you see instead?</b>
chrome starts to download the file in the right format
<b>What version of Google Refine are you using?</b>
using 2.5 trunk
<b>What operating system and browser are you using?</b>
vista & chrome
<b>Is this problem specific to the type of browser you're using or it happens</b>
<b>in all the browsers you tried?</b>
<b>Please provide any additional information below.</b>
_Original issue: http://code.google.com/p/google-refine/issues/detail?id=606_
## <bountysource-plugin>
Want to back this issue? **[Post a bounty on it!](https://www.bountysource.com/issues/62651-500-error-when-creating-custom-export?utm_campaign=plugin&utm_content=tracker%2F32795&utm_medium=issues&utm_source=github)** We accept bounties via [Bountysource](https://www.bountysource.com/?utm_campaign=plugin&utm_content=tracker%2F32795&utm_medium=issues&utm_source=github).
</bountysource-plugin>
| 1.0 | 500 error when creating custom export - _Original author: Martin.M...@gmail.com (August 27, 2012 01:34:18)_
<b>What steps will reproduce the problem?</b>
I'm working with a program that understand only dos encoded file (ASCII, win 1252 or CP 1252-ISO-8859-1)
I've been trying the custom export with dos format and got an HTTP ERROR 500.
See screenshot for more details
<b>What is the expected output? What do you see instead?</b>
chrome starts to download the file in the right format
<b>What version of Google Refine are you using?</b>
using 2.5 trunk
<b>What operating system and browser are you using?</b>
vista & chrome
<b>Is this problem specific to the type of browser you're using or it happens</b>
<b>in all the browsers you tried?</b>
<b>Please provide any additional information below.</b>
_Original issue: http://code.google.com/p/google-refine/issues/detail?id=606_
## <bountysource-plugin>
Want to back this issue? **[Post a bounty on it!](https://www.bountysource.com/issues/62651-500-error-when-creating-custom-export?utm_campaign=plugin&utm_content=tracker%2F32795&utm_medium=issues&utm_source=github)** We accept bounties via [Bountysource](https://www.bountysource.com/?utm_campaign=plugin&utm_content=tracker%2F32795&utm_medium=issues&utm_source=github).
</bountysource-plugin>
| priority | error when creating custom export original author martin m gmail com august what steps will reproduce the problem i m working with a program that understand only dos encoded file ascii win or cp iso i ve been trying the custom export with dos format and got an http error see screenshot for more details what is the expected output what do you see instead chrome starts to download the file in the right format what version of google refine are you using using trunk what operating system and browser are you using vista amp chrome is this problem specific to the type of browser you re using or it happens in all the browsers you tried please provide any additional information below original issue want to back this issue we accept bounties via | 1 |
423,881 | 12,303,333,272 | IssuesEvent | 2020-05-11 18:30:36 | ansible/awx | https://api.github.com/repos/ansible/awx | closed | Can adjust search params for template search, yielding results you can't interact with | component:ui priority:medium state:needs_devel type:bug | ##### ISSUE TYPE
- Bug Report
##### COMPONENT NAME
- UI
##### SUMMARY
The templates page is actually using unified job templates, with filters/parameters set to only return job templates and workflow job templates.
However, by editing the URL, these parameters can be removed, so that the template search shows system jobs, inventory sources, project updates, and more. These do not work properly when shown in the list.
##### ENVIRONMENT
* AWX version: 1.0.any
##### STEPS TO REPRODUCE
1. Go to templates page
2. Remove the implied filter in the URL
##### EXPECTED RESULTS
Not sure
##### ACTUAL RESULTS
System jobs, projects, inventory sources appear. If you try to interact with them, you get:
```
"Error: Unable to determine template type
We were unable to determine this template's type while <action>.
```
##### ADDITIONAL INFORMATION
To fix this, we'd need to introduce the idea of static search params. These params would always get sent when searching/loading a list. For example, when searching templates we should always be sending:
?type=workflow_job_template,job_template
There should be no way for the user to remove that param.
| 1.0 | Can adjust search params for template search, yielding results you can't interact with - ##### ISSUE TYPE
- Bug Report
##### COMPONENT NAME
- UI
##### SUMMARY
The templates page is actually using unified job templates, with filters/parameters set to only return job templates and workflow job templates.
However, by editing the URL, these parameters can be removed, so that the template search shows system jobs, inventory sources, project updates, and more. These do not work properly when shown in the list.
##### ENVIRONMENT
* AWX version: 1.0.any
##### STEPS TO REPRODUCE
1. Go to templates page
2. Remove the implied filter in the URL
##### EXPECTED RESULTS
Not sure
##### ACTUAL RESULTS
System jobs, projects, inventory sources appear. If you try to interact with them, you get:
```
"Error: Unable to determine template type
We were unable to determine this template's type while <action>.
```
##### ADDITIONAL INFORMATION
To fix this, we'd need to introduce the idea of static search params. These params would always get sent when searching/loading a list. For example, when searching templates we should always be sending:
?type=workflow_job_template,job_template
There should be no way for the user to remove that param.
| priority | can adjust search params for template search yielding results you can t interact with issue type bug report component name ui summary the templates page is actually using unified job templates with filters parameters set to only return job templates and workflow job templates however by editing the url these parameters can be removed so that the template search shows system jobs inventory sources project updates and more these do not work properly when shown in the list environment awx version any steps to reproduce go to templates page remove the implied filter in the url expected results not sure actual results system jobs projects inventory sources appear if you try to interact with them you get error unable to determine template type we were unable to determine this template s type while additional information to fix this we d need to introduce the idea of static search params these params would always get sent when searching loading a list for example when searching templates we should always be sending type workflow job template job template there should be no way for the user to remove that param | 1 |
583,298 | 17,381,841,795 | IssuesEvent | 2021-07-31 22:00:09 | WiIIiam278/HuskTownsDocs | https://api.github.com/repos/WiIIiam278/HuskTownsDocs | closed | Abandon all town claims w/ confirmation | priority: medium type: feature request | Original request made by GrandpaCrunkle#3763
Message in #suggestions done by William278 [devoloper]
> Abandon all town claims function w/ confirmation
| 1.0 | Abandon all town claims w/ confirmation - Original request made by GrandpaCrunkle#3763
Message in #suggestions done by William278 [devoloper]
> Abandon all town claims function w/ confirmation
| priority | abandon all town claims w confirmation original request made by grandpacrunkle message in suggestions done by abandon all town claims function w confirmation | 1 |
710,578 | 24,423,571,924 | IssuesEvent | 2022-10-05 23:11:05 | yugabyte/yugabyte-db | https://api.github.com/repos/yugabyte/yugabyte-db | closed | [DocDB] Ignore DDLs in PgSession::Perform DBId computation | kind/enhancement area/docdb priority/medium | Jira Link: [DB-3741](https://yugabyte.atlassian.net/browse/DB-3741)
### Description
DDLs should be ignored as they have operations in both template1 and the user database. Ex: create database and create table | 1.0 | [DocDB] Ignore DDLs in PgSession::Perform DBId computation - Jira Link: [DB-3741](https://yugabyte.atlassian.net/browse/DB-3741)
### Description
DDLs should be ignored as they have operations in both template1 and the user database. Ex: create database and create table | priority | ignore ddls in pgsession perform dbid computation jira link description ddls should be ignored as they have operations in both and the user database ex create database and create table | 1 |
379,996 | 11,252,935,075 | IssuesEvent | 2020-01-11 12:43:55 | chicagopython/chipy.org | https://api.github.com/repos/chicagopython/chipy.org | closed | Paginate the Past Meetings Page | difficulty: medium priority: low status: accepted type: enhancement | As a ChiPy user, I'd like to paginate through the list of past meetings.
https://www.chipy.org/meetings/past/ | 1.0 | Paginate the Past Meetings Page - As a ChiPy user, I'd like to paginate through the list of past meetings.
https://www.chipy.org/meetings/past/ | priority | paginate the past meetings page as a chipy user i d like to paginate through the list of past meetings | 1 |
771,237 | 27,076,074,922 | IssuesEvent | 2023-02-14 10:40:20 | yugabyte/yugabyte-db | https://api.github.com/repos/yugabyte/yugabyte-db | closed | Document caveats related to Django backend for YB | kind/bug priority/medium area/ecosystem | Jira Link: [DB-2151](https://yugabyte.atlassian.net/browse/DB-2151)
select for update clause
Savepoints
Inet types
Type change support | 1.0 | Document caveats related to Django backend for YB - Jira Link: [DB-2151](https://yugabyte.atlassian.net/browse/DB-2151)
select for update clause
Savepoints
Inet types
Type change support | priority | document caveats related to django backend for yb jira link select for update clause savepoints inet types type change support | 1 |
819,030 | 30,717,392,117 | IssuesEvent | 2023-07-27 13:51:43 | memgraph/docs | https://api.github.com/repos/memgraph/docs | opened | Add support for Bolt v5 in docs | priority: medium (missing info) | Add that we support Bolt v5, besides v1 and v4 where needed. For example, here: https://memgraph.com/docs/memgraph/next/connect-to-memgraph/drivers | 1.0 | Add support for Bolt v5 in docs - Add that we support Bolt v5, besides v1 and v4 where needed. For example, here: https://memgraph.com/docs/memgraph/next/connect-to-memgraph/drivers | priority | add support for bolt in docs add that we support bolt besides and where needed for example here | 1 |
61,999 | 3,164,068,928 | IssuesEvent | 2015-09-20 21:23:41 | SiCKRAGETV/sickrage-issues | https://api.github.com/repos/SiCKRAGETV/sickrage-issues | reopened | Episode status unchanged after downloading them in a better quality, SR keeps downloading them. | 1: Bug / issue 2: Medium Priority | My SickRage doesn't change the episode status after donwloading them in a better quality. For most shows I have the following quality settings:
* Initial: 720p HDTV, 720p WEB-DL, 720p BluRay
* Replace with: 720p WEB-DL, 720p BluRay
* Archive First Match enabled.
So for example if there are some episodes downloaded in 720p HDTV quality and SickRage then snatches and downloads the same episodes as 720p BluRay releases. The files are downloaded and postprocessed correctly, even the quality in the filename is changed to 720p BluRay. But in SickRage the episode status remains on "Snatched (Best) 720p BluRay", so they are downloaded over and over again, which causes a lot of traffic. Sometimes the status isn't even changed to snatched inbetween, it just remains on "Downloaded HDTV", but better releases are still downloaded.
I use the SickRage internal postprocessor (Scan and Process), not sabToSickbeard.
* Branch: master
* Commit: 7694b70047796dc0c9c812300a090f78a4240f46
* OS: Debian wheezy
* Python: 2.7.3
* Downloaders: SABnzbd only, no torrents etc.
Naturally I tried the usual simple stuff like restarting and updating SR. Any ideas?
Cheers! | 1.0 | Episode status unchanged after downloading them in a better quality, SR keeps downloading them. - My SickRage doesn't change the episode status after donwloading them in a better quality. For most shows I have the following quality settings:
* Initial: 720p HDTV, 720p WEB-DL, 720p BluRay
* Replace with: 720p WEB-DL, 720p BluRay
* Archive First Match enabled.
So for example if there are some episodes downloaded in 720p HDTV quality and SickRage then snatches and downloads the same episodes as 720p BluRay releases. The files are downloaded and postprocessed correctly, even the quality in the filename is changed to 720p BluRay. But in SickRage the episode status remains on "Snatched (Best) 720p BluRay", so they are downloaded over and over again, which causes a lot of traffic. Sometimes the status isn't even changed to snatched inbetween, it just remains on "Downloaded HDTV", but better releases are still downloaded.
I use the SickRage internal postprocessor (Scan and Process), not sabToSickbeard.
* Branch: master
* Commit: 7694b70047796dc0c9c812300a090f78a4240f46
* OS: Debian wheezy
* Python: 2.7.3
* Downloaders: SABnzbd only, no torrents etc.
Naturally I tried the usual simple stuff like restarting and updating SR. Any ideas?
Cheers! | priority | episode status unchanged after downloading them in a better quality sr keeps downloading them my sickrage doesn t change the episode status after donwloading them in a better quality for most shows i have the following quality settings initial hdtv web dl bluray replace with web dl bluray archive first match enabled so for example if there are some episodes downloaded in hdtv quality and sickrage then snatches and downloads the same episodes as bluray releases the files are downloaded and postprocessed correctly even the quality in the filename is changed to bluray but in sickrage the episode status remains on snatched best bluray so they are downloaded over and over again which causes a lot of traffic sometimes the status isn t even changed to snatched inbetween it just remains on downloaded hdtv but better releases are still downloaded i use the sickrage internal postprocessor scan and process not sabtosickbeard branch master commit os debian wheezy python downloaders sabnzbd only no torrents etc naturally i tried the usual simple stuff like restarting and updating sr any ideas cheers | 1 |
779,982 | 27,374,977,475 | IssuesEvent | 2023-02-28 04:44:03 | jbx-protocol/juice-interface | https://api.github.com/repos/jbx-protocol/juice-interface | opened | Can't set project split token beneficiary to an existing ETH address split | Bug Priority: Medium | ## Summary
1. Go to create flow
2. Add a reserved token split to an ETH address (may also be an issue in payout splits)
3. Add another split to a project and set the ETH address in step 2 as its token beneficiary
4. Notice it is not possible (it should be)
## What is the _current_ bug behavior?
## What is the expected _correct_ behavior?
## Relevant logs and/or screenshots
## Environment
- **Device/OS**: [e.g. iOS]
- **Browser:** [e.g. chrome, safari]
- **Hardware wallet**: [e.g. Ledger w/ Metamask]
| 1.0 | Can't set project split token beneficiary to an existing ETH address split - ## Summary
1. Go to create flow
2. Add a reserved token split to an ETH address (may also be an issue in payout splits)
3. Add another split to a project and set the ETH address in step 2 as its token beneficiary
4. Notice it is not possible (it should be)
## What is the _current_ bug behavior?
## What is the expected _correct_ behavior?
## Relevant logs and/or screenshots
## Environment
- **Device/OS**: [e.g. iOS]
- **Browser:** [e.g. chrome, safari]
- **Hardware wallet**: [e.g. Ledger w/ Metamask]
| priority | can t set project split token beneficiary to an existing eth address split summary go to create flow add a reserved token split to an eth address may also be an issue in payout splits add another split to a project and set the eth address in step as its token beneficiary notice it is not possible it should be what is the current bug behavior what is the expected correct behavior relevant logs and or screenshots environment device os browser hardware wallet | 1 |
666,931 | 22,392,453,239 | IssuesEvent | 2022-06-17 09:03:06 | trimble-oss/website-modus.trimble.com | https://api.github.com/repos/trimble-oss/website-modus.trimble.com | closed | Dark Mode switch for Website | 5 priority:medium task dark-mode | We need to add a dark mode switch to the website.
- If the user has a dark-theme preference it will load the dark mode theme
- If the user has a light-theme preference it will load the light mode theme
unless:
- a user has already set a preference on the site which sets this in local storage.
Adding this will require additional CSS changes for the website which was built/designed only for a light-mode. | 1.0 | Dark Mode switch for Website - We need to add a dark mode switch to the website.
- If the user has a dark-theme preference it will load the dark mode theme
- If the user has a light-theme preference it will load the light mode theme
unless:
- a user has already set a preference on the site which sets this in local storage.
Adding this will require additional CSS changes for the website which was built/designed only for a light-mode. | priority | dark mode switch for website we need to add a dark mode switch to the website if the user has a dark theme preference it will load the dark mode theme if the user has a light theme preference it will load the light mode theme unless a user has already set a preference on the site which sets this in local storage adding this will require additional css changes for the website which was built designed only for a light mode | 1 |
705,539 | 24,238,369,411 | IssuesEvent | 2022-09-27 03:02:26 | paperclip-ui/paperclip | https://api.github.com/repos/paperclip-ui/paperclip | closed | TD project file should contain environment | priority: medium impact: high | Environment should specify rules, like should it be possible for people to attach controllers? This should be specific to the target environment. | 1.0 | TD project file should contain environment - Environment should specify rules, like should it be possible for people to attach controllers? This should be specific to the target environment. | priority | td project file should contain environment environment should specify rules like should it be possible for people to attach controllers this should be specific to the target environment | 1 |
409,172 | 11,958,018,151 | IssuesEvent | 2020-04-04 16:27:30 | kkkmail/ClmFSharp | https://api.github.com/repos/kkkmail/ClmFSharp | closed | Check if it is worth removing Windows Remoting in communication between SolverRunner and WorkerNode | 5.0.0.3 Priority: Medium Type: Enhancement | It seems possible to switch from spawning processes into spawning threads. Investigate if this is worth doing. The things to consider are as follows:
1. A separate spawned process is very easy to monitor using task manager and it can be easily cancelled in case of any troubles without affecting the rest of running models.
2. As we have a command line, we can run SolverRunner by hands to examine any possible issues.
3. On the other side that requires inter process communication, which might cause some troubles. | 1.0 | Check if it is worth removing Windows Remoting in communication between SolverRunner and WorkerNode - It seems possible to switch from spawning processes into spawning threads. Investigate if this is worth doing. The things to consider are as follows:
1. A separate spawned process is very easy to monitor using task manager and it can be easily cancelled in case of any troubles without affecting the rest of running models.
2. As we have a command line, we can run SolverRunner by hands to examine any possible issues.
3. On the other side that requires inter process communication, which might cause some troubles. | priority | check if it is worth removing windows remoting in communication between solverrunner and workernode it seems possible to switch from spawning processes into spawning threads investigate if this is worth doing the things to consider are as follows a separate spawned process is very easy to monitor using task manager and it can be easily cancelled in case of any troubles without affecting the rest of running models as we have a command line we can run solverrunner by hands to examine any possible issues on the other side that requires inter process communication which might cause some troubles | 1 |
133,423 | 5,203,089,262 | IssuesEvent | 2017-01-24 11:39:24 | DiCarloLab-Delft/PycQED_py3 | https://api.github.com/repos/DiCarloLab-Delft/PycQED_py3 | opened | RamZ Flux pulse timing calibration | enhancement priority: should/medium | Sequence to calibrate timing of flux pulses
-pi/2- Flux pulse - pi/2
Vary the position of the Flux pulse. When it hits either edge of the sequence, it will lead to a phase error that this sequence picks up. | 1.0 | RamZ Flux pulse timing calibration - Sequence to calibrate timing of flux pulses
-pi/2- Flux pulse - pi/2
Vary the position of the Flux pulse. When it hits either edge of the sequence, it will lead to a phase error that this sequence picks up. | priority | ramz flux pulse timing calibration sequence to calibrate timing of flux pulses pi flux pulse pi vary the position of the flux pulse when it hits either edge of the sequence it will lead to a phase error that this sequence picks up | 1 |
747,982 | 26,102,958,006 | IssuesEvent | 2022-12-27 09:34:20 | bounswe/bounswe2022group2 | https://api.github.com/repos/bounswe/bounswe2022group2 | opened | Frontent: Unit tests for Bio component | priority-medium status-new front-end | ### Issue Description
Unit tests will be completed for the Bio component
### Step Details
_No response_
### Final Actions
_No response_
### Deadline of the Issue
26.12.2022 - Tuesday - 23.59
### Reviewer
None
### Deadline for the Review
_No response_ | 1.0 | Frontent: Unit tests for Bio component - ### Issue Description
Unit tests will be completed for the Bio component
### Step Details
_No response_
### Final Actions
_No response_
### Deadline of the Issue
26.12.2022 - Tuesday - 23.59
### Reviewer
None
### Deadline for the Review
_No response_ | priority | frontent unit tests for bio component issue description unit tests will be completed for the bio component step details no response final actions no response deadline of the issue tuesday reviewer none deadline for the review no response | 1 |
357,330 | 10,605,235,397 | IssuesEvent | 2019-10-10 19:59:54 | craftercms/craftercms | https://api.github.com/repos/craftercms/craftercms | closed | [studio-ui] Add "no template required" option for components too | enhancement priority: medium | Pages offer a no template required check box on form builder so saving doesn't warn you if you haven't selected a template before saving.
Please add same for components.
Use case: SPA components that interact with CMS content types | 1.0 | [studio-ui] Add "no template required" option for components too - Pages offer a no template required check box on form builder so saving doesn't warn you if you haven't selected a template before saving.
Please add same for components.
Use case: SPA components that interact with CMS content types | priority | add no template required option for components too pages offer a no template required check box on form builder so saving doesn t warn you if you haven t selected a template before saving please add same for components use case spa components that interact with cms content types | 1 |
222,143 | 7,428,577,478 | IssuesEvent | 2018-03-24 03:15:44 | EvictionLab/eviction-maps | https://api.github.com/repos/EvictionLab/eviction-maps | closed | Highlighted feature outlines not using max detail | bug medium priority | The calculations in `shouldUpdateFeature` don't seem to be quite right, since some locations including Michigan seem to keep the low detail version:
<img width="456" alt="screen shot 2018-03-20 at 2 49 41 pm" src="https://user-images.githubusercontent.com/8291663/37679310-887d4ef6-2c4e-11e8-8772-fdedb22d2e4d.png">
I think the 95% threshold here https://github.com/EvictionLab/eviction-maps/blob/development/src/app/map-tool/map/map.service.ts#L371 was because the top of California is clipped otherwise, so it may make more sense to check 95% of the bounding box area? | 1.0 | Highlighted feature outlines not using max detail - The calculations in `shouldUpdateFeature` don't seem to be quite right, since some locations including Michigan seem to keep the low detail version:
<img width="456" alt="screen shot 2018-03-20 at 2 49 41 pm" src="https://user-images.githubusercontent.com/8291663/37679310-887d4ef6-2c4e-11e8-8772-fdedb22d2e4d.png">
I think the 95% threshold here https://github.com/EvictionLab/eviction-maps/blob/development/src/app/map-tool/map/map.service.ts#L371 was because the top of California is clipped otherwise, so it may make more sense to check 95% of the bounding box area? | priority | highlighted feature outlines not using max detail the calculations in shouldupdatefeature don t seem to be quite right since some locations including michigan seem to keep the low detail version img width alt screen shot at pm src i think the threshold here was because the top of california is clipped otherwise so it may make more sense to check of the bounding box area | 1 |
493,018 | 14,224,439,960 | IssuesEvent | 2020-11-17 19:40:34 | interferences-at/mpop | https://api.github.com/repos/interferences-at/mpop | closed | (kiosk) Switching to another page should stay in the same tab | QML bug difficulty: medium mpop_kiosk priority: high ready | (kiosk) Switching to another page should stay in the same tab
## Criteria
When I switch from question 1 to question 2:
- If I am in the "Answer" tab, it should stay in the "Answer" tab, once we are on the other question's page.
- If I am in the dataviz tab, it should go to the *home* of the dataviz tab, once I am in the other question's page. | 1.0 | (kiosk) Switching to another page should stay in the same tab - (kiosk) Switching to another page should stay in the same tab
## Criteria
When I switch from question 1 to question 2:
- If I am in the "Answer" tab, it should stay in the "Answer" tab, once we are on the other question's page.
- If I am in the dataviz tab, it should go to the *home* of the dataviz tab, once I am in the other question's page. | priority | kiosk switching to another page should stay in the same tab kiosk switching to another page should stay in the same tab criteria when i switch from question to question if i am in the answer tab it should stay in the answer tab once we are on the other question s page if i am in the dataviz tab it should go to the home of the dataviz tab once i am in the other question s page | 1 |
779,427 | 27,352,287,128 | IssuesEvent | 2023-02-27 10:24:00 | ansible-collections/azure | https://api.github.com/repos/ansible-collections/azure | closed | Update README in community.azure | medium_priority work in | <!--- Verify first that your improvement is not already reported on GitHub -->
<!--- Also test if the latest release and devel branch are affected too -->
<!--- Complete *all* sections as described, this form is processed automatically -->
##### SUMMARY
https://github.com/ansible-collections/community.azure/blob/master/README.md should be updated (and maybe README of `azure` as well) to describe the current relationship between the `azure` and `community.azure` repositories (e.g., the purpose of keeping those info modules there, if it should be made readonly one day, etc).
Now `community.azure` says "Provides modules for Ansible for various Azure operations." but I see only _info modules there.
As community.azure seems to be pretty inactive, I created the issue here. | 1.0 | Update README in community.azure - <!--- Verify first that your improvement is not already reported on GitHub -->
<!--- Also test if the latest release and devel branch are affected too -->
<!--- Complete *all* sections as described, this form is processed automatically -->
##### SUMMARY
https://github.com/ansible-collections/community.azure/blob/master/README.md should be updated (and maybe README of `azure` as well) to describe the current relationship between the `azure` and `community.azure` repositories (e.g., the purpose of keeping those info modules there, if it should be made readonly one day, etc).
Now `community.azure` says "Provides modules for Ansible for various Azure operations." but I see only _info modules there.
As community.azure seems to be pretty inactive, I created the issue here. | priority | update readme in community azure summary should be updated and maybe readme of azure as well to describe the current relationship between the azure and community azure repositories e g the purpose of keeping those info modules there if it should be made readonly one day etc now community azure says provides modules for ansible for various azure operations but i see only info modules there as community azure seems to be pretty inactive i created the issue here | 1 |
198,512 | 6,973,791,262 | IssuesEvent | 2017-12-11 21:47:35 | HabitRPG/habitica | https://api.github.com/repos/HabitRPG/habitica | reopened | allow moderators to send a private message (PM) to any user - ignore opt-out / blocking | priority: important section: Messages status: issue: in progress type: medium level coding | A moderator (anyone with `contributor.admin` set to true) should be able to send a PM to any player, even if the player has opted out of receiving PMs.
In the player's inbox, the on-hover text that explains the opt out feature must state that it does not prevent mods from sending them PMs.
The moderator should also be able to send a PM if the player has blocked the mod. Note that this should not be done by preventing the player from blocking the mod because the player might have blocked them before they became a mod. Instead, this should be done by simply ignoring the block if the person sending the PM is a mod.
In the profile screen that you see when you click on a player's name, the on-hover text for the block button at the top right should state that it will have no effect if the player is a mod now or becomes a mod in future.
_FYI, this is because moderators sometimes need to contact players with important information, often for the player's own benefit (e.g., to explain that the player had to have their chat permissions temporarily removed and to describe what the player can do to have the permissions restored)._
| 1.0 | allow moderators to send a private message (PM) to any user - ignore opt-out / blocking - A moderator (anyone with `contributor.admin` set to true) should be able to send a PM to any player, even if the player has opted out of receiving PMs.
In the player's inbox, the on-hover text that explains the opt out feature must state that it does not prevent mods from sending them PMs.
The moderator should also be able to send a PM if the player has blocked the mod. Note that this should not be done by preventing the player from blocking the mod because the player might have blocked them before they became a mod. Instead, this should be done by simply ignoring the block if the person sending the PM is a mod.
In the profile screen that you see when you click on a player's name, the on-hover text for the block button at the top right should state that it will have no effect if the player is a mod now or becomes a mod in future.
_FYI, this is because moderators sometimes need to contact players with important information, often for the player's own benefit (e.g., to explain that the player had to have their chat permissions temporarily removed and to describe what the player can do to have the permissions restored)._
| priority | allow moderators to send a private message pm to any user ignore opt out blocking a moderator anyone with contributor admin set to true should be able to send a pm to any player even if the player has opted out of receiving pms in the player s inbox the on hover text that explains the opt out feature must state that it does not prevent mods from sending them pms the moderator should also be able to send a pm if the player has blocked the mod note that this should not be done by preventing the player from blocking the mod because the player might have blocked them before they became a mod instead this should be done by simply ignoring the block if the person sending the pm is a mod in the profile screen that you see when you click on a player s name the on hover text for the block button at the top right should state that it will have no effect if the player is a mod now or becomes a mod in future fyi this is because moderators sometimes need to contact players with important information often for the player s own benefit e g to explain that the player had to have their chat permissions temporarily removed and to describe what the player can do to have the permissions restored | 1 |
508,205 | 14,692,900,336 | IssuesEvent | 2021-01-03 05:28:22 | blchelle/collabogreat | https://api.github.com/repos/blchelle/collabogreat | closed | Add Breadcrumb routing to UI | Priority: Medium Status: Available Type: Enhancement | ## Description
When a user is authenticated, they should be able to easily see where they are in the site and easily be able to navigate around to various projects and tasks. A good solution for this is a breadcrumb router (maybe attached to the CGAppBar Component?). | 1.0 | Add Breadcrumb routing to UI - ## Description
When a user is authenticated, they should be able to easily see where they are in the site and easily be able to navigate around to various projects and tasks. A good solution for this is a breadcrumb router (maybe attached to the CGAppBar Component?). | priority | add breadcrumb routing to ui description when a user is authenticated they should be able to easily see where they are in the site and easily be able to navigate around to various projects and tasks a good solution for this is a breadcrumb router maybe attached to the cgappbar component | 1 |
280,189 | 8,678,892,875 | IssuesEvent | 2018-11-30 21:31:53 | AugurProject/augur-ui | https://api.github.com/repos/AugurProject/augur-ui | closed | markets in designated_reporting have full timer on them in market list | Priority: Medium Unreproducible Bug | These show up for non-designated reporter account
<img width="1567" alt="screen shot 2018-11-28 at 1 46 28 pm" src="https://user-images.githubusercontent.com/6775839/49184382-0e52c100-f314-11e8-8f85-06cdf1c1235e.png">
this ended up going away and can't repro since dev.augur.net was updated
| 1.0 | markets in designated_reporting have full timer on them in market list - These show up for non-designated reporter account
<img width="1567" alt="screen shot 2018-11-28 at 1 46 28 pm" src="https://user-images.githubusercontent.com/6775839/49184382-0e52c100-f314-11e8-8f85-06cdf1c1235e.png">
this ended up going away and can't repro since dev.augur.net was updated
| priority | markets in designated reporting have full timer on them in market list these show up for non designated reporter account img width alt screen shot at pm src this ended up going away and can t repro since dev augur net was updated | 1 |
724,221 | 24,921,147,368 | IssuesEvent | 2022-10-31 00:06:18 | space-wizards/space-station-14 | https://api.github.com/repos/space-wizards/space-station-14 | closed | Female stencil masks don't seem to do anything | Issue: Bug Priority: 3-Not Required Difficulty: 2-Medium Bug: Replicated | ## Description
<!-- Explain your issue in detail. Issues without proper explanation are liable to be closed by maintainers. -->
They are supposed to
**Reproduction**
<!-- Include the steps to reproduce if applicable. -->
1. Spawn a female human
2. Remove all clothing
3. Spawn a male human next to them
4. Spawn the same jumpsuit slot item that has a female mask set
6. Observe that they are literally identical, pixel for pixel
**Screenshots**
<!-- If applicable, add screenshots to help explain your problem. -->
I overlaid one on top of the other and toggled layer visiblity. They are literally identical.
Overlaid the mask manually, recolored green for visibility
**Additional context**
<!-- Add any other context about the problem here. Anything you think is related to the issue. -->
| 1.0 | Female stencil masks don't seem to do anything - ## Description
<!-- Explain your issue in detail. Issues without proper explanation are liable to be closed by maintainers. -->
They are supposed to
**Reproduction**
<!-- Include the steps to reproduce if applicable. -->
1. Spawn a female human
2. Remove all clothing
3. Spawn a male human next to them
4. Spawn the same jumpsuit slot item that has a female mask set
6. Observe that they are literally identical, pixel for pixel
**Screenshots**
<!-- If applicable, add screenshots to help explain your problem. -->
I overlaid one on top of the other and toggled layer visiblity. They are literally identical.
Overlaid the mask manually, recolored green for visibility
**Additional context**
<!-- Add any other context about the problem here. Anything you think is related to the issue. -->
| priority | female stencil masks don t seem to do anything description they are supposed to reproduction spawn a female human remove all clothing spawn a male human next to them spawn the same jumpsuit slot item that has a female mask set observe that they are literally identical pixel for pixel screenshots i overlaid one on top of the other and toggled layer visiblity they are literally identical overlaid the mask manually recolored green for visibility additional context | 1 |
42,200 | 2,869,321,052 | IssuesEvent | 2015-06-06 02:59:33 | CenterForOpenScience/osf.io | https://api.github.com/repos/CenterForOpenScience/osf.io | closed | [Production & Staging] [Firefox] File version table has incorrect time | 2 - ready bug: production intern priority - medium | ## Steps
1. Log in to osf.io on the Firefox browser
2. Go to a project you have admin on
3. On the project overview page click on the osf storage folder to select it
4. In the toolbar, click to upload a file
5. Refresh the page and look at the project log. You should see a log entry for the file you just uploaded. Make note of the time showing.
6. Click on the link in the log to go to the file
7. Look to the right of the rendered image at the version table for the file
8. Make note of the time.
## Expected
I would expect the time showing in the project log for a file upload and the time in the version table for the file to be the same. I would expect the time in the version table to be the accurate time.
## Actual
The log for the file upload is showing the correct time. However, the version table shows the incorrect time; it is 4 hours ahead of the current time.
Appears to only happen on Firefox. | 1.0 | [Production & Staging] [Firefox] File version table has incorrect time - ## Steps
1. Log in to osf.io on the Firefox browser
2. Go to a project you have admin on
3. On the project overview page click on the osf storage folder to select it
4. In the toolbar, click to upload a file
5. Refresh the page and look at the project log. You should see a log entry for the file you just uploaded. Make note of the time showing.
6. Click on the link in the log to go to the file
7. Look to the right of the rendered image at the version table for the file
8. Make note of the time.
## Expected
I would expect the time showing in the project log for a file upload and the time in the version table for the file to be the same. I would expect the time in the version table to be the accurate time.
## Actual
The log for the file upload is showing the correct time. However, the version table shows the incorrect time; it is 4 hours ahead of the current time.
Appears to only happen on Firefox. | priority | file version table has incorrect time steps log in to osf io on the firefox browser go to a project you have admin on on the project overview page click on the osf storage folder to select it in the toolbar click to upload a file refresh the page and look at the project log you should see a log entry for the file you just uploaded make note of the time showing click on the link in the log to go to the file look to the right of the rendered image at the version table for the file make note of the time expected i would expect the time showing in the project log for a file upload and the time in the version table for the file to be the same i would expect the time in the version table to be the accurate time actual the log for the file upload is showing the correct time however the version table shows the incorrect time it is hours ahead of the current time appears to only happen on firefox | 1 |
168,145 | 6,362,759,753 | IssuesEvent | 2017-07-31 15:35:34 | status-im/status-react | https://api.github.com/repos/status-im/status-react | closed | Adding iCloud Photo Library photo as profile picture hangs app on iOS | bug intermediate ios medium-priority | ### User Story
As a user, I want to change my profile picture so that I am identifiable.
### Description
*Type*: Bug
*Summary*: Tried to set my profile photo by selecting a photo from the iOS gallery. A modal, blocking activity indicator is stuck on "Processing assets..."
#### Expected behavior
Profile photo gets set immediately.
#### Actual behavior
Modal, blocking activity indicator is stuck on "Processing assets..."
### Reproduction
1. Open Status for iOS
2. Navigate to your user profile
3. Tap on the "..." button in the upper right
4. Tap "Edit"
5. Tap the profile photo with "Edit" overlay
6. Tap "Select from gallery"
7. Select the any album
8. Select one photo that you haven't looked at in a long time. Photo should be stored on iCloud rather than locally on the device.
9. [App is now stuck and you cannot cancel the modal]
### Solution
Two options:
1. Have a timeout and error message
2. Figure out how to fetch an iCloud Photo Libray photo in a timely manner
### Additional Information
* Status version: 0.9.7d64
* Operating System: iOS 10.3.1 | 1.0 | Adding iCloud Photo Library photo as profile picture hangs app on iOS - ### User Story
As a user, I want to change my profile picture so that I am identifiable.
### Description
*Type*: Bug
*Summary*: Tried to set my profile photo by selecting a photo from the iOS gallery. A modal, blocking activity indicator is stuck on "Processing assets..."
#### Expected behavior
Profile photo gets set immediately.
#### Actual behavior
Modal, blocking activity indicator is stuck on "Processing assets..."
### Reproduction
1. Open Status for iOS
2. Navigate to your user profile
3. Tap on the "..." button in the upper right
4. Tap "Edit"
5. Tap the profile photo with "Edit" overlay
6. Tap "Select from gallery"
7. Select the any album
8. Select one photo that you haven't looked at in a long time. Photo should be stored on iCloud rather than locally on the device.
9. [App is now stuck and you cannot cancel the modal]
### Solution
Two options:
1. Have a timeout and error message
2. Figure out how to fetch an iCloud Photo Libray photo in a timely manner
### Additional Information
* Status version: 0.9.7d64
* Operating System: iOS 10.3.1 | priority | adding icloud photo library photo as profile picture hangs app on ios user story as a user i want to change my profile picture so that i am identifiable description type bug summary tried to set my profile photo by selecting a photo from the ios gallery a modal blocking activity indicator is stuck on processing assets expected behavior profile photo gets set immediately actual behavior modal blocking activity indicator is stuck on processing assets reproduction open status for ios navigate to your user profile tap on the button in the upper right tap edit tap the profile photo with edit overlay tap select from gallery select the any album select one photo that you haven t looked at in a long time photo should be stored on icloud rather than locally on the device solution two options have a timeout and error message figure out how to fetch an icloud photo libray photo in a timely manner additional information status version operating system ios | 1 |
78,950 | 3,519,671,490 | IssuesEvent | 2016-01-12 17:42:37 | LearningLocker/StatementFactory | https://api.github.com/repos/LearningLocker/StatementFactory | closed | regex in Mailto.php forbids generic TLD | priority:medium status:confirmed type:bug | The regex only allows TLD that are 2 to 4 characters long and effectively locks out any user from using learninglocker if his email address is based on a generic TLD like ".horse". | 1.0 | regex in Mailto.php forbids generic TLD - The regex only allows TLD that are 2 to 4 characters long and effectively locks out any user from using learninglocker if his email address is based on a generic TLD like ".horse". | priority | regex in mailto php forbids generic tld the regex only allows tld that are to characters long and effectively locks out any user from using learninglocker if his email address is based on a generic tld like horse | 1 |
473,995 | 13,650,440,193 | IssuesEvent | 2020-09-26 19:08:53 | space-wizards/space-station-14 | https://api.github.com/repos/space-wizards/space-station-14 | closed | Sec officer's backpack sprites are broken. | Junior Job Priority: 2-medium Type: Bug | When you pick up/wear one you turn into a black rectangle. | 1.0 | Sec officer's backpack sprites are broken. - When you pick up/wear one you turn into a black rectangle. | priority | sec officer s backpack sprites are broken when you pick up wear one you turn into a black rectangle | 1 |
522,210 | 15,158,178,153 | IssuesEvent | 2021-02-12 00:30:54 | NOAA-GSL/MATS | https://api.github.com/repos/NOAA-GSL/MATS | closed | Move plot control buttons to above plot title | Priority: Medium Project: MATS Status: Closed Type: Feature | ---
Author Name: **molly.b.smith** (@mollybsmith-noaa)
Original Redmine Issue: 63801, https://vlab.ncep.noaa.gov/redmine/issues/63801
Original Date: 2019-05-10
Original Assignee: molly.b.smith
---
Users at the feedback meeting asked that we move the blue control buttons to the very top of the graph page.
| 1.0 | Move plot control buttons to above plot title - ---
Author Name: **molly.b.smith** (@mollybsmith-noaa)
Original Redmine Issue: 63801, https://vlab.ncep.noaa.gov/redmine/issues/63801
Original Date: 2019-05-10
Original Assignee: molly.b.smith
---
Users at the feedback meeting asked that we move the blue control buttons to the very top of the graph page.
| priority | move plot control buttons to above plot title author name molly b smith mollybsmith noaa original redmine issue original date original assignee molly b smith users at the feedback meeting asked that we move the blue control buttons to the very top of the graph page | 1 |
425,417 | 12,339,990,869 | IssuesEvent | 2020-05-14 19:06:36 | adumortier/dev.to | https://api.github.com/repos/adumortier/dev.to | closed | reader stats - total number of articles read | feature medium priority | As a user, when I look at the reader stat dashboard on my profile page, I see the total number of articles read | 1.0 | reader stats - total number of articles read - As a user, when I look at the reader stat dashboard on my profile page, I see the total number of articles read | priority | reader stats total number of articles read as a user when i look at the reader stat dashboard on my profile page i see the total number of articles read | 1 |
787,248 | 27,711,741,676 | IssuesEvent | 2023-03-14 14:38:20 | AY2223S2-CS2113-T15-1/tp | https://api.github.com/repos/AY2223S2-CS2113-T15-1/tp | closed | Edit Ui output for greater clarity | type.Enhancement priority.Medium | If CLIAlgo has no notes tracked, the Ui should be able to inform the reader that the TopicManager is empty. | 1.0 | Edit Ui output for greater clarity - If CLIAlgo has no notes tracked, the Ui should be able to inform the reader that the TopicManager is empty. | priority | edit ui output for greater clarity if clialgo has no notes tracked the ui should be able to inform the reader that the topicmanager is empty | 1 |
444,335 | 12,810,207,036 | IssuesEvent | 2020-07-03 17:51:41 | CDH-Studio/UpSkill | https://api.github.com/repos/CDH-Studio/UpSkill | closed | Backend Data validation | Backend enhancement medium priority | The data must be validated when a request is made by the frontend. The following link can be used as a validation node package.
https://express-validator.github.io/docs/ | 1.0 | Backend Data validation - The data must be validated when a request is made by the frontend. The following link can be used as a validation node package.
https://express-validator.github.io/docs/ | priority | backend data validation the data must be validated when a request is made by the frontend the following link can be used as a validation node package | 1 |
41,827 | 2,869,084,422 | IssuesEvent | 2015-06-05 23:12:26 | dart-lang/polymer-dart | https://api.github.com/repos/dart-lang/polymer-dart | closed | Respecting Polymer ImportInliner path reaching packages warning breaks in Dartium | AssumedStale bug PolymerMilestone-Next Priority-Medium | _Originally opened as dart-lang/sdk#18473_
*This issue was originally filed by joh...@johnmccutchan.com*
_____
If I follow the following advice:
[Error from polymer (ImportInliner) on observatory|web/index.html\]:
lib/src/elements/vm_ref.html:5:11: Invalid url to reach to another package: packages/observatory/src/elements/css/shared.css. Path reaching to other packages must first reach up all the way to the packages folder. For example, try changing the url above to: ../../../../packages/observatory/src/elements/css/shared.css
aka
replace packages/observatory/src/elements/css/shared.css with ../../../../packages/observatory/src/elements/css/shared.css
The application works when compiled to dart2js but fails in Dartium.
Leaving it as packages/observatory/src/elements/css/shared.css causes the application to work when compiled to dart2js and in Dartium. | 1.0 | Respecting Polymer ImportInliner path reaching packages warning breaks in Dartium - _Originally opened as dart-lang/sdk#18473_
*This issue was originally filed by joh...@johnmccutchan.com*
_____
If I follow the following advice:
[Error from polymer (ImportInliner) on observatory|web/index.html\]:
lib/src/elements/vm_ref.html:5:11: Invalid url to reach to another package: packages/observatory/src/elements/css/shared.css. Path reaching to other packages must first reach up all the way to the packages folder. For example, try changing the url above to: ../../../../packages/observatory/src/elements/css/shared.css
aka
replace packages/observatory/src/elements/css/shared.css with ../../../../packages/observatory/src/elements/css/shared.css
The application works when compiled to dart2js but fails in Dartium.
Leaving it as packages/observatory/src/elements/css/shared.css causes the application to work when compiled to dart2js and in Dartium. | priority | respecting polymer importinliner path reaching packages warning breaks in dartium originally opened as dart lang sdk this issue was originally filed by joh johnmccutchan com if i follow the following advice lib src elements vm ref html invalid url to reach to another package packages observatory src elements css shared css path reaching to other packages must first reach up all the way to the packages folder for example try changing the url above to packages observatory src elements css shared css aka replace packages observatory src elements css shared css with packages observatory src elements css shared css the application works when compiled to but fails in dartium leaving it as packages observatory src elements css shared css causes the application to work when compiled to and in dartium | 1 |
271,219 | 8,481,664,268 | IssuesEvent | 2018-10-25 16:18:23 | edenlabllc/ehealth.api | https://api.github.com/repos/edenlabllc/ehealth.api | closed | DEDUPLICATION_DEPTH bug | bug epic/deduplication priority/medium status/todo | Candidates for deduplication must be chosen based on DEDUPLICATION_DEPTH:
```
- Read DEDUPLICATION_DEPTH parameter value.
If DEDUPLICATION_DEPTH = 0, analyze the whole period
- Fetch records from MPI.person created in DEDUPLICATION_DEPTH
```
As for now when DEDUPLICATION_DEPTH = 0, zero candidates will be returned. | 1.0 | DEDUPLICATION_DEPTH bug - Candidates for deduplication must be chosen based on DEDUPLICATION_DEPTH:
```
- Read DEDUPLICATION_DEPTH parameter value.
If DEDUPLICATION_DEPTH = 0, analyze the whole period
- Fetch records from MPI.person created in DEDUPLICATION_DEPTH
```
As for now when DEDUPLICATION_DEPTH = 0, zero candidates will be returned. | priority | deduplication depth bug candidates for deduplication must be chosen based on deduplication depth read deduplication depth parameter value if deduplication depth analyze the whole period fetch records from mpi person created in deduplication depth as for now when deduplication depth zero candidates will be returned | 1 |
643,574 | 20,959,948,357 | IssuesEvent | 2022-03-27 16:48:25 | status-im/status-desktop | https://api.github.com/repos/status-im/status-desktop | opened | pinned message shows on activity center | bug Chat Activity_center priority 2: medium | # Bug Report
## Description
It's unclear if this message should even be showing in the activity center in the first place. There is no mention of this in the spec https://github.com/status-im/feature-specs/pull/30/files so likely it should simply not be displayed at all
## Steps to reproduce
1. open a 1 on 1
2. send an image
3. pin the message
#### Expected behavior
message in activity center should not display
#### Actual behavior
| 1.0 | pinned message shows on activity center - # Bug Report
## Description
It's unclear if this message should even be showing in the activity center in the first place. There is no mention of this in the spec https://github.com/status-im/feature-specs/pull/30/files so likely it should simply not be displayed at all
## Steps to reproduce
1. open a 1 on 1
2. send an image
3. pin the message
#### Expected behavior
message in activity center should not display
#### Actual behavior
| priority | pinned message shows on activity center bug report description it s unclear if this message should even be showing in the activity center in the first place there is no mention of this in the spec so likely it should simply not be displayed at all steps to reproduce open a on send an image pin the message expected behavior message in activity center should not display actual behavior | 1 |
284,262 | 8,736,836,402 | IssuesEvent | 2018-12-11 20:42:59 | aowen87/TicketTester | https://api.github.com/repos/aowen87/TicketTester | closed | VisIt crashes reading a session file. | bug crash invalid likelihood medium priority reviewed severity high wrong results | Willy Moss has a session file that he created with VisIt 2.10.0 and when he tries to restore it, VisIt crashes. He is running client server from his Mac to surface and it does it right away, even before prompting for a password to login to surface. I took the session files and made the minimal changes necessary to use it and it worked for me, going from my Linux system to surface. We need to build a debug version for the Mac and run it on Willy's system to debug what is going on.
-----------------------REDMINE MIGRATION-----------------------
This ticket was migrated from Redmine. As such, not all
information was able to be captured in the transition. Below is
a complete record of the original redmine ticket.
Ticket number: 2488
Status: Expired
Project: VisIt
Tracker: Bug
Priority: Urgent
Subject: VisIt crashes reading a session file.
Assigned to:
Category:
Target version:
Author: Eric Brugger
Start: 12/22/2015
Due date:
% Done: 0
Estimated time:
Created: 12/22/2015 02:19 pm
Updated: 03/29/2016 06:35 pm
Likelihood: 3 - Occasional
Severity: 4 - Crash / Wrong Results
Found in version: 2.10.0
Impact:
Expected Use:
OS: All
Support Group: Any
Description:
Willy Moss has a session file that he created with VisIt 2.10.0 and when he tries to restore it, VisIt crashes. He is running client server from his Mac to surface and it does it right away, even before prompting for a password to login to surface. I took the session files and made the minimal changes necessary to use it and it worked for me, going from my Linux system to surface. We need to build a debug version for the Mac and run it on Willy's system to debug what is going on.
Comments:
| 1.0 | VisIt crashes reading a session file. - Willy Moss has a session file that he created with VisIt 2.10.0 and when he tries to restore it, VisIt crashes. He is running client server from his Mac to surface and it does it right away, even before prompting for a password to login to surface. I took the session files and made the minimal changes necessary to use it and it worked for me, going from my Linux system to surface. We need to build a debug version for the Mac and run it on Willy's system to debug what is going on.
-----------------------REDMINE MIGRATION-----------------------
This ticket was migrated from Redmine. As such, not all
information was able to be captured in the transition. Below is
a complete record of the original redmine ticket.
Ticket number: 2488
Status: Expired
Project: VisIt
Tracker: Bug
Priority: Urgent
Subject: VisIt crashes reading a session file.
Assigned to:
Category:
Target version:
Author: Eric Brugger
Start: 12/22/2015
Due date:
% Done: 0
Estimated time:
Created: 12/22/2015 02:19 pm
Updated: 03/29/2016 06:35 pm
Likelihood: 3 - Occasional
Severity: 4 - Crash / Wrong Results
Found in version: 2.10.0
Impact:
Expected Use:
OS: All
Support Group: Any
Description:
Willy Moss has a session file that he created with VisIt 2.10.0 and when he tries to restore it, VisIt crashes. He is running client server from his Mac to surface and it does it right away, even before prompting for a password to login to surface. I took the session files and made the minimal changes necessary to use it and it worked for me, going from my Linux system to surface. We need to build a debug version for the Mac and run it on Willy's system to debug what is going on.
Comments:
| priority | visit crashes reading a session file willy moss has a session file that he created with visit and when he tries to restore it visit crashes he is running client server from his mac to surface and it does it right away even before prompting for a password to login to surface i took the session files and made the minimal changes necessary to use it and it worked for me going from my linux system to surface we need to build a debug version for the mac and run it on willy s system to debug what is going on redmine migration this ticket was migrated from redmine as such not all information was able to be captured in the transition below is a complete record of the original redmine ticket ticket number status expired project visit tracker bug priority urgent subject visit crashes reading a session file assigned to category target version author eric brugger start due date done estimated time created pm updated pm likelihood occasional severity crash wrong results found in version impact expected use os all support group any description willy moss has a session file that he created with visit and when he tries to restore it visit crashes he is running client server from his mac to surface and it does it right away even before prompting for a password to login to surface i took the session files and made the minimal changes necessary to use it and it worked for me going from my linux system to surface we need to build a debug version for the mac and run it on willy s system to debug what is going on comments | 1 |
266,502 | 8,368,525,925 | IssuesEvent | 2018-10-04 14:58:43 | dojot/dojot | https://api.github.com/repos/dojot/dojot | opened | [GUI] Templates list: scroll bar is moved | Priority:Medium Team:Frontend Type:Bug | When the menu is collapsed, the scroll bar is moved to the center of the screen.
| 1.0 | [GUI] Templates list: scroll bar is moved - When the menu is collapsed, the scroll bar is moved to the center of the screen.
| priority | templates list scroll bar is moved when the menu is collapsed the scroll bar is moved to the center of the screen | 1 |
40,945 | 2,868,956,990 | IssuesEvent | 2015-06-05 22:11:39 | dart-lang/pub | https://api.github.com/repos/dart-lang/pub | closed | add support for dev_transformers | duplicate enhancement Priority-Medium | <a href="https://github.com/sigmundch"><img src="https://avatars.githubusercontent.com/u/2049220?v=3" align="left" width="96" height="96"hspace="10"></img></a> **Issue by [sigmundch](https://github.com/sigmundch)**
_Originally opened as dart-lang/sdk#14187_
----
Brief summary of a discussion we had here in person:
polymer transformers need to read the transitive closure of html files imported from an entry point. This may include assets from other packages. If those packages do not include the polymer transformer, then it's great - we'll be able to read the original assets contents.
It's likely that developers of polymer libraries might want to test their code using polymer's transformers, so we might need a notion of dev_transformers so that those transformations are not visible to other packages. | 1.0 | add support for dev_transformers - <a href="https://github.com/sigmundch"><img src="https://avatars.githubusercontent.com/u/2049220?v=3" align="left" width="96" height="96"hspace="10"></img></a> **Issue by [sigmundch](https://github.com/sigmundch)**
_Originally opened as dart-lang/sdk#14187_
----
Brief summary of a discussion we had here in person:
polymer transformers need to read the transitive closure of html files imported from an entry point. This may include assets from other packages. If those packages do not include the polymer transformer, then it's great - we'll be able to read the original assets contents.
It's likely that developers of polymer libraries might want to test their code using polymer's transformers, so we might need a notion of dev_transformers so that those transformations are not visible to other packages. | priority | add support for dev transformers issue by originally opened as dart lang sdk brief summary of a discussion we had here in person polymer transformers need to read the transitive closure of html files imported from an entry point this may include assets from other packages if those packages do not include the polymer transformer then it s great we ll be able to read the original assets contents it s likely that developers of polymer libraries might want to test their code using polymer s transformers so we might need a notion of dev transformers so that those transformations are not visible to other packages | 1 |
437,290 | 12,566,719,130 | IssuesEvent | 2020-06-08 11:44:09 | zentrumnawi/solid-backend | https://api.github.com/repos/zentrumnawi/solid-backend | closed | Löschen von Bildern beim | bug medium-priority | Die definierten `ImageField`'s setzen das Feld nur auf `null` wenn man die Clear-Checkbox anklickt.
Dabei wird die eigentliche Bilddatei nicht gelöscht. Das versucht Datei-Leichen und kann bei gleichnamigem Uploadfile zu seltsamen Dateinamen führen.
Um das zu lösen gibt es zwei Möglichkeiten:
1. Neue Subclass von `django.models.Model` und überschreiben der save/delete methode.
2. Erstellen einer Reciver Funktion und anbinden an die `post_save` bzw. `post_delete` signale
| 1.0 | Löschen von Bildern beim - Die definierten `ImageField`'s setzen das Feld nur auf `null` wenn man die Clear-Checkbox anklickt.
Dabei wird die eigentliche Bilddatei nicht gelöscht. Das versucht Datei-Leichen und kann bei gleichnamigem Uploadfile zu seltsamen Dateinamen führen.
Um das zu lösen gibt es zwei Möglichkeiten:
1. Neue Subclass von `django.models.Model` und überschreiben der save/delete methode.
2. Erstellen einer Reciver Funktion und anbinden an die `post_save` bzw. `post_delete` signale
| priority | löschen von bildern beim die definierten imagefield s setzen das feld nur auf null wenn man die clear checkbox anklickt dabei wird die eigentliche bilddatei nicht gelöscht das versucht datei leichen und kann bei gleichnamigem uploadfile zu seltsamen dateinamen führen um das zu lösen gibt es zwei möglichkeiten neue subclass von django models model und überschreiben der save delete methode erstellen einer reciver funktion und anbinden an die post save bzw post delete signale | 1 |
207,591 | 7,131,424,778 | IssuesEvent | 2018-01-22 10:56:22 | GreenDelta/Sophena | https://api.github.com/repos/GreenDelta/Sophena | opened | Navigation: Projekte in Ordnern strukturieren können: Neue Ordner können angelegt werden, Projekte in Ordner verschoben werden (Drag and Drop) | enhancement medium priority question | kommt etwas auf die gewünschten Funktionen an: z.B. Ordner in Ordner verschieben etc. | 1.0 | Navigation: Projekte in Ordnern strukturieren können: Neue Ordner können angelegt werden, Projekte in Ordner verschoben werden (Drag and Drop) - kommt etwas auf die gewünschten Funktionen an: z.B. Ordner in Ordner verschieben etc. | priority | navigation projekte in ordnern strukturieren können neue ordner können angelegt werden projekte in ordner verschoben werden drag and drop kommt etwas auf die gewünschten funktionen an z b ordner in ordner verschieben etc | 1 |
78,134 | 3,509,478,906 | IssuesEvent | 2016-01-08 22:58:16 | OregonCore/OregonCore | https://api.github.com/repos/OregonCore/OregonCore | closed | Vengeful Gladiator's Waraxe (34014) (BB #903) | Category: Exploit migrated Priority: Medium Type: Bug | This issue was migrated from bitbucket.
**Original Reporter:** bewtihozzy
**Original Date:** 24.05.2015 13:00:48 GMT+0000
**Original Priority:** major
**Original Type:** bug
**Original State:** invalid
**Direct Link:** https://bitbucket.org/oregon/oregoncore/issues/903
<hr>
Leeni "Smiley" Smalls <Arena Vendor> (24392) is selling Vengeful Gladiator's Waraxe (34014) for 800 arena points and without any rating requirement. | 1.0 | Vengeful Gladiator's Waraxe (34014) (BB #903) - This issue was migrated from bitbucket.
**Original Reporter:** bewtihozzy
**Original Date:** 24.05.2015 13:00:48 GMT+0000
**Original Priority:** major
**Original Type:** bug
**Original State:** invalid
**Direct Link:** https://bitbucket.org/oregon/oregoncore/issues/903
<hr>
Leeni "Smiley" Smalls <Arena Vendor> (24392) is selling Vengeful Gladiator's Waraxe (34014) for 800 arena points and without any rating requirement. | priority | vengeful gladiator s waraxe bb this issue was migrated from bitbucket original reporter bewtihozzy original date gmt original priority major original type bug original state invalid direct link leeni smiley smalls is selling vengeful gladiator s waraxe for arena points and without any rating requirement | 1 |
129,152 | 5,089,436,047 | IssuesEvent | 2017-01-01 16:16:40 | pixijs/pixi.js | https://api.github.com/repos/pixijs/pixi.js | closed | hitArea property with PIXI.RoundedRectangle doesn't work correct | Domain: API Plugin: Interaction Manager Priority: Medium Status: Accepting PRs Type: Bug Version: v4.x | Click on rounded rectangle - how clear rectangle. Need support rounded rectangle for hitArea
var button = new PIXI.Graphics();
button.beginFill();
button.drawRoundedRect(500, 500, 224, 164, 40);
button.endFill();
button.buttonMode = true;
button.interactive = true;
button.hitArea = new PIXI.RoundedRectangle(500, 500, 224, 164, 40);
this.addChild(button)
| 1.0 | hitArea property with PIXI.RoundedRectangle doesn't work correct - Click on rounded rectangle - how clear rectangle. Need support rounded rectangle for hitArea
var button = new PIXI.Graphics();
button.beginFill();
button.drawRoundedRect(500, 500, 224, 164, 40);
button.endFill();
button.buttonMode = true;
button.interactive = true;
button.hitArea = new PIXI.RoundedRectangle(500, 500, 224, 164, 40);
this.addChild(button)
| priority | hitarea property with pixi roundedrectangle doesn t work correct click on rounded rectangle how clear rectangle need support rounded rectangle for hitarea var button new pixi graphics button beginfill button drawroundedrect button endfill button buttonmode true button interactive true button hitarea new pixi roundedrectangle this addchild button | 1 |
521,523 | 15,110,455,842 | IssuesEvent | 2021-02-08 19:14:57 | svthalia/concrexit | https://api.github.com/repos/svthalia/concrexit | opened | Placeholder photo for committees does not work | bug priority: medium | ### Describe the bug
Placeholder photo for committees does not work
### How to reproduce
Steps to reproduce the behaviour:
1. Go to https://thalia.nu/association/committees/42/
2. See that there is not image
### Expected behaviour
The image should work.
### Additional context
The url still contains the language code. | 1.0 | Placeholder photo for committees does not work - ### Describe the bug
Placeholder photo for committees does not work
### How to reproduce
Steps to reproduce the behaviour:
1. Go to https://thalia.nu/association/committees/42/
2. See that there is not image
### Expected behaviour
The image should work.
### Additional context
The url still contains the language code. | priority | placeholder photo for committees does not work describe the bug placeholder photo for committees does not work how to reproduce steps to reproduce the behaviour go to see that there is not image expected behaviour the image should work additional context the url still contains the language code | 1 |
261,762 | 8,245,897,530 | IssuesEvent | 2018-09-11 11:10:06 | assistify/Rocket.Chat | https://api.github.com/repos/assistify/Rocket.Chat | reopened | fix (translation) keys for Smarti settings | Cmp: Smarti in RocketChat Priority: Medium Type: Improvement | ### Description
During `less-is-more` development, there are some out-dated keys in the Smarti settings.
We should make sure, those settings will be removed from the database.
### Out-dated settings/labels
### reversed translation keys
By fixing this issue we should make sure the right translation keys are used:
 | 1.0 | fix (translation) keys for Smarti settings - ### Description
During `less-is-more` development, there are some out-dated keys in the Smarti settings.
We should make sure, those settings will be removed from the database.
### Out-dated settings/labels
### reversed translation keys
By fixing this issue we should make sure the right translation keys are used:
 | priority | fix translation keys for smarti settings description during less is more development there are some out dated keys in the smarti settings we should make sure those settings will be removed from the database out dated settings labels reversed translation keys by fixing this issue we should make sure the right translation keys are used | 1 |
581,257 | 17,289,876,066 | IssuesEvent | 2021-07-24 14:07:28 | belav/csharpier | https://api.github.com/repos/belav/csharpier | closed | ForEachVariableStatement not breaking/indenting consistently with regular ForEachStatement | area:formatting priority:medium type:bug | I'm not exactly sure what this should look like, but it definitely isn't this.
```c#
foreach ((
(int l2, int l3),
(int total, string[] stats)
) in (from l2 in Enumerable.Range(1, 7)
from l3 in Enumerable.Range(1, 7)
select (l2, l3)).AsParallel()
.Select(l => (l, res: GenerateTable(l.l2, l.l3, cutOff)))
.OrderBy(v => v.res.Total))
{
Console.WriteLine($"Stats for {l2}:{l3}");
foreach (var line in stats) Console.WriteLine(line);
} | 1.0 | ForEachVariableStatement not breaking/indenting consistently with regular ForEachStatement - I'm not exactly sure what this should look like, but it definitely isn't this.
```c#
foreach ((
(int l2, int l3),
(int total, string[] stats)
) in (from l2 in Enumerable.Range(1, 7)
from l3 in Enumerable.Range(1, 7)
select (l2, l3)).AsParallel()
.Select(l => (l, res: GenerateTable(l.l2, l.l3, cutOff)))
.OrderBy(v => v.res.Total))
{
Console.WriteLine($"Stats for {l2}:{l3}");
foreach (var line in stats) Console.WriteLine(line);
} | priority | foreachvariablestatement not breaking indenting consistently with regular foreachstatement i m not exactly sure what this should look like but it definitely isn t this c foreach int int int total string stats in from in enumerable range from in enumerable range select asparallel select l l res generatetable l l cutoff orderby v v res total console writeline stats for foreach var line in stats console writeline line | 1 |
22,504 | 2,649,269,514 | IssuesEvent | 2015-03-14 19:02:49 | KaiSD/ogstudio | https://api.github.com/repos/KaiSD/ogstudio | closed | Automate mesh export process | Assigned-kornerr auto-migrated Category-Game Difficulty-Moderate Expect-Month Milestone-MJ2-Alpha Priority-Medium Project-Project2 Type-Enhancement | ```
http://www.blendercookie.com/category/all/tutorials/scripting/
http://www.blendercookie.com/2011/01/07/creating-an-add-mesh-primitives-panel-in
-the-tool-shelf/
also, if you pull the top bar down, you'll get invoked commands.
```
Original issue reported on code.google.com by `korn...@gmail.com` on 23 Jun 2011 at 10:47 | 1.0 | Automate mesh export process - ```
http://www.blendercookie.com/category/all/tutorials/scripting/
http://www.blendercookie.com/2011/01/07/creating-an-add-mesh-primitives-panel-in
-the-tool-shelf/
also, if you pull the top bar down, you'll get invoked commands.
```
Original issue reported on code.google.com by `korn...@gmail.com` on 23 Jun 2011 at 10:47 | priority | automate mesh export process the tool shelf also if you pull the top bar down you ll get invoked commands original issue reported on code google com by korn gmail com on jun at | 1 |
639,102 | 20,746,754,922 | IssuesEvent | 2022-03-15 00:24:01 | ruby-concurrency/concurrent-ruby | https://api.github.com/repos/ruby-concurrency/concurrent-ruby | closed | Update APIs to use named arguments | enhancement looking-for-contributor medium-priority | * where it makes sense
* a bigger task
* the named arguments should be added across the whole gem
* or in few steps for a logically connected groups of APIs/abstractions each time | 1.0 | Update APIs to use named arguments - * where it makes sense
* a bigger task
* the named arguments should be added across the whole gem
* or in few steps for a logically connected groups of APIs/abstractions each time | priority | update apis to use named arguments where it makes sense a bigger task the named arguments should be added across the whole gem or in few steps for a logically connected groups of apis abstractions each time | 1 |
77,622 | 3,507,184,187 | IssuesEvent | 2016-01-08 11:45:38 | OregonCore/OregonCore | https://api.github.com/repos/OregonCore/OregonCore | closed | Fear + Join to arena (BB #605) | migrated Priority: Medium Type: Bug | This issue was migrated from bitbucket.
**Original Reporter:** smoldar
**Original Date:** 09.07.2014 20:12:29 GMT+0000
**Original Priority:** major
**Original Type:** bug
**Original State:** closed
**Direct Link:** https://bitbucket.org/oregon/oregoncore/issues/605
<hr>
When someone join to arena and at pvp zone get fear from other player, sometimes player fall down under map in arena preparation. | 1.0 | Fear + Join to arena (BB #605) - This issue was migrated from bitbucket.
**Original Reporter:** smoldar
**Original Date:** 09.07.2014 20:12:29 GMT+0000
**Original Priority:** major
**Original Type:** bug
**Original State:** closed
**Direct Link:** https://bitbucket.org/oregon/oregoncore/issues/605
<hr>
When someone join to arena and at pvp zone get fear from other player, sometimes player fall down under map in arena preparation. | priority | fear join to arena bb this issue was migrated from bitbucket original reporter smoldar original date gmt original priority major original type bug original state closed direct link when someone join to arena and at pvp zone get fear from other player sometimes player fall down under map in arena preparation | 1 |
199,966 | 6,996,602,426 | IssuesEvent | 2017-12-16 02:30:39 | minio/minio | https://api.github.com/repos/minio/minio | closed | docs: document using s3fs, drupal 8, with Minio | priority: medium | <!--- Provide a general summary of the issue in the Title above -->
## Expected Behavior
Not sure. I imagine the images uploaded via a file field in a content type would upload into minio but, nothing happens.
## Current Behavior
```
drupal | 172.18.0.1 - - [13/Sep/2017:21:07:30 +0000] "POST /history/1/read HTTP/1.1" 200 480 "http://localhost:8080/node/1" "Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/61.0.3163.79 Safari/537.36"
drupal | 172.18.0.1 - - [13/Sep/2017:21:07:31 +0000] "POST /quickedit/attachments?_wrapper_format=drupal_ajax HTTP/1.1" 200 7326 "http://localhost:8080/node/1" "Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/61.0.3163.79 Safari/537.36"
drupal | 172.18.0.1 - - [13/Sep/2017:21:07:31 +0000] "GET /sites/default/files/js/js_IjQsAUQTLAkT9VCj6YK_e3goj8xnGm9tQzgfnKBfFKE.js?_=1505336850512 HTTP/1.1" 200 6560 "http://localhost:8080/node/1" "Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/61.0.3163.79 Safari/537.36"
drupal | 172.18.0.1 - - [13/Sep/2017:21:07:31 +0000] "GET /core/modules/editor/js/editor.formattedTextEditor.js?v=8.3.7&_=1505336850513 HTTP/1.1" 200 2597 "http://localhost:8080/node/1" "Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/61.0.3163.79 Safari/537.36"
minio | time="2017-09-13T21:07:39Z" level=error msg="Received non-HTTP message from new connection 172.18.0.1:42984 at server 172.18.0.7:9000" cause="junk message" source="[listener.go:205:github.com/minio/minio/pkg/http.(*httpListener).start.func2()]"
```
## Possible Solution
<!--- Not obligatory, but suggest a fix/reason for the bug, -->
<!--- or ideas how to implement the addition or change -->
## Steps to Reproduce (for bugs)
I tried several different configurations but, this is where i last left off. I wasn't sure if minio needed to be prepended to the bucket name.
// also added this to drupal/src/web/sites/default/settings.php
```
$settings['s3fs.use_s3_for_public'] = TRUE;
$settings['s3fs.use_s3_for_private'] = TRUE;
$settings['php_storage']['twig']['directory'] = '../storage/php';
```
docker-compose for minio
```
minio:
container_name: minio
restart: always
image: minio/minio:latest
ports:
- 9000:9000
environment:
MINIO_ACCESS_KEY: minio
MINIO_SECRET_KEY: minio123
command: server /data
```
## Context
Using Module https://www.drupal.org/project/s3fs for drupal 8 (8.x-3.0-alpha7 released 28 August 2017)
if you use the composer project to manage dependencies it will pull in the latest aws sdk
```
root@4254fa2423d0:/var/www/html# composer require drupal/s3fs:3.0-alpha7
./composer.json has been updated
> DrupalProject\composer\ScriptHandler::checkComposerVersion
Loading composer repositories with package information
Updating dependencies (including require-dev)
Package operations: 3 installs, 0 updates, 0 removals
- Installing mtdowling/jmespath.php (2.4.0): Downloading (100%)
- Installing aws/aws-sdk-php (3.36.7): Downloading (100%)
- Installing drupal/s3fs (3.0.0-alpha7): Downloading (100%)
aws/aws-sdk-php suggests installing aws/aws-php-sns-message-validator (To validate incoming SNS notifications)
Writing lock file
Generating autoload files
```
## Your Environment
Using docker/docker-compose and drupal 8 with docker image from docker store by minio
VERSION
2017-08-05T00:00:53Z
MEMORY
Used: 4.0 MB | Allocated: 40 MB | Used-Heap: 4.0 MB | Allocated-Heap: 11 MB
PLATFORM
Host: dbf934f99373 | OS: linux | Arch: amd64
RUNTIME
Version: go1.7.5 | CPUs: 4 | 1.0 | docs: document using s3fs, drupal 8, with Minio - <!--- Provide a general summary of the issue in the Title above -->
## Expected Behavior
Not sure. I imagine the images uploaded via a file field in a content type would upload into minio but, nothing happens.
## Current Behavior
```
drupal | 172.18.0.1 - - [13/Sep/2017:21:07:30 +0000] "POST /history/1/read HTTP/1.1" 200 480 "http://localhost:8080/node/1" "Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/61.0.3163.79 Safari/537.36"
drupal | 172.18.0.1 - - [13/Sep/2017:21:07:31 +0000] "POST /quickedit/attachments?_wrapper_format=drupal_ajax HTTP/1.1" 200 7326 "http://localhost:8080/node/1" "Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/61.0.3163.79 Safari/537.36"
drupal | 172.18.0.1 - - [13/Sep/2017:21:07:31 +0000] "GET /sites/default/files/js/js_IjQsAUQTLAkT9VCj6YK_e3goj8xnGm9tQzgfnKBfFKE.js?_=1505336850512 HTTP/1.1" 200 6560 "http://localhost:8080/node/1" "Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/61.0.3163.79 Safari/537.36"
drupal | 172.18.0.1 - - [13/Sep/2017:21:07:31 +0000] "GET /core/modules/editor/js/editor.formattedTextEditor.js?v=8.3.7&_=1505336850513 HTTP/1.1" 200 2597 "http://localhost:8080/node/1" "Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/61.0.3163.79 Safari/537.36"
minio | time="2017-09-13T21:07:39Z" level=error msg="Received non-HTTP message from new connection 172.18.0.1:42984 at server 172.18.0.7:9000" cause="junk message" source="[listener.go:205:github.com/minio/minio/pkg/http.(*httpListener).start.func2()]"
```
## Possible Solution
<!--- Not obligatory, but suggest a fix/reason for the bug, -->
<!--- or ideas how to implement the addition or change -->
## Steps to Reproduce (for bugs)
I tried several different configurations but, this is where i last left off. I wasn't sure if minio needed to be prepended to the bucket name.
// also added this to drupal/src/web/sites/default/settings.php
```
$settings['s3fs.use_s3_for_public'] = TRUE;
$settings['s3fs.use_s3_for_private'] = TRUE;
$settings['php_storage']['twig']['directory'] = '../storage/php';
```
docker-compose for minio
```
minio:
container_name: minio
restart: always
image: minio/minio:latest
ports:
- 9000:9000
environment:
MINIO_ACCESS_KEY: minio
MINIO_SECRET_KEY: minio123
command: server /data
```
## Context
Using Module https://www.drupal.org/project/s3fs for drupal 8 (8.x-3.0-alpha7 released 28 August 2017)
if you use the composer project to manage dependencies it will pull in the latest aws sdk
```
root@4254fa2423d0:/var/www/html# composer require drupal/s3fs:3.0-alpha7
./composer.json has been updated
> DrupalProject\composer\ScriptHandler::checkComposerVersion
Loading composer repositories with package information
Updating dependencies (including require-dev)
Package operations: 3 installs, 0 updates, 0 removals
- Installing mtdowling/jmespath.php (2.4.0): Downloading (100%)
- Installing aws/aws-sdk-php (3.36.7): Downloading (100%)
- Installing drupal/s3fs (3.0.0-alpha7): Downloading (100%)
aws/aws-sdk-php suggests installing aws/aws-php-sns-message-validator (To validate incoming SNS notifications)
Writing lock file
Generating autoload files
```
## Your Environment
Using docker/docker-compose and drupal 8 with docker image from docker store by minio
VERSION
2017-08-05T00:00:53Z
MEMORY
Used: 4.0 MB | Allocated: 40 MB | Used-Heap: 4.0 MB | Allocated-Heap: 11 MB
PLATFORM
Host: dbf934f99373 | OS: linux | Arch: amd64
RUNTIME
Version: go1.7.5 | CPUs: 4 | priority | docs document using drupal with minio expected behavior not sure i imagine the images uploaded via a file field in a content type would upload into minio but nothing happens current behavior drupal post history read http mozilla linux applewebkit khtml like gecko chrome safari drupal post quickedit attachments wrapper format drupal ajax http mozilla linux applewebkit khtml like gecko chrome safari drupal get sites default files js js js http mozilla linux applewebkit khtml like gecko chrome safari drupal get core modules editor js editor formattedtexteditor js v http mozilla linux applewebkit khtml like gecko chrome safari minio time level error msg received non http message from new connection at server cause junk message source possible solution steps to reproduce for bugs i tried several different configurations but this is where i last left off i wasn t sure if minio needed to be prepended to the bucket name also added this to drupal src web sites default settings php settings true settings true settings storage php docker compose for minio minio container name minio restart always image minio minio latest ports environment minio access key minio minio secret key command server data context using module for drupal x released august if you use the composer project to manage dependencies it will pull in the latest aws sdk root var www html composer require drupal composer json has been updated drupalproject composer scripthandler checkcomposerversion loading composer repositories with package information updating dependencies including require dev package operations installs updates removals installing mtdowling jmespath php downloading installing aws aws sdk php downloading installing drupal downloading aws aws sdk php suggests installing aws aws php sns message validator to validate incoming sns notifications writing lock file generating autoload files your environment using docker docker compose and drupal with docker image from docker store by minio version memory used mb allocated mb used heap mb allocated heap mb platform host os linux arch runtime version cpus | 1 |
551,949 | 16,191,800,917 | IssuesEvent | 2021-05-04 09:31:40 | openshift/odo | https://api.github.com/repos/openshift/odo | closed | odo url create --now triggers redeploy | area/url kind/bug priority/Medium | When I'm trying to create url on Minikube it restarts the pod.
```
▶ odo url create --host $(minikube ip).nip.io --now
✓ URL java-springboot-8080 created for component: java-springboot
Validation
✓ Validating the devfile [127024ns]
Creating Kubernetes resources for component java-springboot
✓ Waiting for component to start [17s]
⚠ Unable to create ingress, missing host information for Endpoint 8080-tcp, please check instructions on URL creation (refer `odo url create --help`)
Applying URL changes
✓ URL java-springboot: http://java-springboot.192.168.64.74.nip.io/ created
Syncing to component java-springboot
✓ Checking file changes for pushing [2ms]
✓ Syncing files to the component [142ms]
Executing devfile commands for component java-springboot
✓ Executing build command "mvn clean -Dmaven.repo.local=/home/user/.m2/repository package -Dmaven.test.skip=true" [5s]
✓ Executing run command "mvn -Dmaven.repo.local=/home/user/.m2/repository spring-boot:run" [1s]
Pushing devfile component java-springboot
✓ Changes successfully pushed to component
```
`odo url create --host $(minikube ip).nip.io; odo push` does the same.
There should be no reason to restart the Pod when there is no other change than creating new url
/area url
/kind bug
/priority medium | 1.0 | odo url create --now triggers redeploy - When I'm trying to create url on Minikube it restarts the pod.
```
▶ odo url create --host $(minikube ip).nip.io --now
✓ URL java-springboot-8080 created for component: java-springboot
Validation
✓ Validating the devfile [127024ns]
Creating Kubernetes resources for component java-springboot
✓ Waiting for component to start [17s]
⚠ Unable to create ingress, missing host information for Endpoint 8080-tcp, please check instructions on URL creation (refer `odo url create --help`)
Applying URL changes
✓ URL java-springboot: http://java-springboot.192.168.64.74.nip.io/ created
Syncing to component java-springboot
✓ Checking file changes for pushing [2ms]
✓ Syncing files to the component [142ms]
Executing devfile commands for component java-springboot
✓ Executing build command "mvn clean -Dmaven.repo.local=/home/user/.m2/repository package -Dmaven.test.skip=true" [5s]
✓ Executing run command "mvn -Dmaven.repo.local=/home/user/.m2/repository spring-boot:run" [1s]
Pushing devfile component java-springboot
✓ Changes successfully pushed to component
```
`odo url create --host $(minikube ip).nip.io; odo push` does the same.
There should be no reason to restart the Pod when there is no other change than creating new url
/area url
/kind bug
/priority medium | priority | odo url create now triggers redeploy when i m trying to create url on minikube it restarts the pod ▶ odo url create host minikube ip nip io now ✓ url java springboot created for component java springboot validation ✓ validating the devfile creating kubernetes resources for component java springboot ✓ waiting for component to start ⚠ unable to create ingress missing host information for endpoint tcp please check instructions on url creation refer odo url create help applying url changes ✓ url java springboot created syncing to component java springboot ✓ checking file changes for pushing ✓ syncing files to the component executing devfile commands for component java springboot ✓ executing build command mvn clean dmaven repo local home user repository package dmaven test skip true ✓ executing run command mvn dmaven repo local home user repository spring boot run pushing devfile component java springboot ✓ changes successfully pushed to component odo url create host minikube ip nip io odo push does the same there should be no reason to restart the pod when there is no other change than creating new url area url kind bug priority medium | 1 |
238,453 | 7,779,574,567 | IssuesEvent | 2018-06-05 17:15:16 | zephyrproject-rtos/zephyr | https://api.github.com/repos/zephyrproject-rtos/zephyr | closed | Bluetooth: Mesh: adv bearer does not use correct interval | area: Bluetooth bug priority: medium | Setting any interval > 20ms will not be reflected in the adv.c as `BT_MESH_ADV(buf)->adv_int` needs to be decoded first. But it also looks like `BT_MESH_ADV(buf)->adv_int` carries a wrong value set by higher layers.
E.g. an Interval of 100ms should be encoded as 9 << 3 = 0b01001, yet` BT_MESH_ADV(buf)->adv_int` = 0b0100 | 1.0 | Bluetooth: Mesh: adv bearer does not use correct interval - Setting any interval > 20ms will not be reflected in the adv.c as `BT_MESH_ADV(buf)->adv_int` needs to be decoded first. But it also looks like `BT_MESH_ADV(buf)->adv_int` carries a wrong value set by higher layers.
E.g. an Interval of 100ms should be encoded as 9 << 3 = 0b01001, yet` BT_MESH_ADV(buf)->adv_int` = 0b0100 | priority | bluetooth mesh adv bearer does not use correct interval setting any interval will not be reflected in the adv c as bt mesh adv buf adv int needs to be decoded first but it also looks like bt mesh adv buf adv int carries a wrong value set by higher layers e g an interval of should be encoded as adv int | 1 |
825,740 | 31,469,639,282 | IssuesEvent | 2023-08-30 06:29:39 | yugabyte/yugabyte-db | https://api.github.com/repos/yugabyte/yugabyte-db | reopened | [YSQL] ysqlsh: select from pg_stat_statements may return inconsistent results depending on hosts sent | kind/enhancement area/ysql priority/medium | Jira Link: [DB-7712](https://yugabyte.atlassian.net/browse/DB-7712)
### Description
Example of calling select statement against pg_stat_statements table in the test:
1. We select all current rows:
```
select query, calls, total_time, min_time, max_time, mean_time, rows, yb_latency_histogram
from pg_stat_statements;
query|calls|total_time|min_time|max_time|mean_time|rows|yb_latency_histogram
select from write_read_test where id = $1|10|3.025252|0.260038|0.396283|0.3025252|10|[{"[0.2,0.3)": 5}, {"[0.3,0.4)": 5}]
delete from write_read_test where id = $1|10|7.575764|0.709629|0.914914|0.7575764|10|[{"[0.7,0.8)": 9}, {"[0.9,1.0)": 1}]
SELECT jsonb_agg(x) FROM (SELECT version()) as x|1|0.0312|0.0312|0.0312|0.0312|1|[{"[0.0,0.1)": 1}]
insert into write_read_test values ($1) on conflict do nothing|10|53.42914|2.51402|7.957288|5.342914|10|[{"[2.4,2.6)": 1}, {"[4.0,4.4)": 1}, {"[4.4,4.8)": 1}, {"[4.8,5.2)": 1}, {"[5.2,5.6)": 2}, {"[5.6,6.0)": 2}, {"[6.4,7.2)": 1}, {"[7.2,8.0)": 1}]
(4 rows)
```
2. Next call we try to get testing query and it wasn't in the table 6 seconds ago
```
query|calls|total_time|min_time|max_time|mean_time|rows|yb_latency_histogram
select .... for update|177921|204594.267284999|0.843289|48.732094|1.14991635211694|177921|[{"[0.8,0.9)": 448}, {"[0.9,1.0)": 25183}, {"[1.0,1.1)": 55601}, {"[1.1,1.2)": 47761}, {"[1.2,1.3)": 22473}, {"[1.3,1.4)": 14205}, {"[1.4,1.5)": 7348}, {"[1.5,1.6)": 2998}, {"[1.6,1.8)": 1353}, {"[1.8,2.0)": 253}, {"[2.0,2.2)": 94}, {"[2.2,2.4)": 44}, {"[2.4,2.6)": 22}, {"[2.6,2.8)": 23}, {"[2.8,3.0)": 12}, {"[3.0,3.2)": 10}, {"[3.2,3.6)": 9}, {"[3.6,4.0)": 6}, {"[4.0,4.4)": 7}, {"[4.4,4.8)": 3}, {"[4.8,5.2)": 4}, {"[5.2,5.6)": 3}, {"[5.6,6.0)": 3}, {"[6.0,6.4)": 4}, {"[6.4,7.2)": 2}, {"[7.2,8.0)": 5}, {"[8.0,8.8)": 3}, {"[8.8,9.6)": 1}, {"[9.6,10.4)": 2}, {"[10.4,11.2)": 5}, {"[12.0,12.8)": 3}, {"[12.8,14.4)": 1}, {"[14.4,16.0)": 2}, {"[16.0,17.6)": 1}, {"[17.6,19.2)": 5}, {"[19.2,20.8)": 8}, {"[20.8,22.4)": 6}, {"[22.4,24.0)": 2}, {"[24.0,25.6)": 2}, {"[25.6,28.8)": 3}, {"[28.8,32.0)": 1}, {"[32.0,35.2)": 1}, {"[48.0,51.2)": 1}]
(1 row)
```
### Warning: Please confirm that this issue does not contain any sensitive information
- [X] I confirm this issue does not contain any sensitive information.
[DB-7712]: https://yugabyte.atlassian.net/browse/DB-7712?atlOrigin=eyJpIjoiNWRkNTljNzYxNjVmNDY3MDlhMDU5Y2ZhYzA5YTRkZjUiLCJwIjoiZ2l0aHViLWNvbS1KU1cifQ | 1.0 | [YSQL] ysqlsh: select from pg_stat_statements may return inconsistent results depending on hosts sent - Jira Link: [DB-7712](https://yugabyte.atlassian.net/browse/DB-7712)
### Description
Example of calling select statement against pg_stat_statements table in the test:
1. We select all current rows:
```
select query, calls, total_time, min_time, max_time, mean_time, rows, yb_latency_histogram
from pg_stat_statements;
query|calls|total_time|min_time|max_time|mean_time|rows|yb_latency_histogram
select from write_read_test where id = $1|10|3.025252|0.260038|0.396283|0.3025252|10|[{"[0.2,0.3)": 5}, {"[0.3,0.4)": 5}]
delete from write_read_test where id = $1|10|7.575764|0.709629|0.914914|0.7575764|10|[{"[0.7,0.8)": 9}, {"[0.9,1.0)": 1}]
SELECT jsonb_agg(x) FROM (SELECT version()) as x|1|0.0312|0.0312|0.0312|0.0312|1|[{"[0.0,0.1)": 1}]
insert into write_read_test values ($1) on conflict do nothing|10|53.42914|2.51402|7.957288|5.342914|10|[{"[2.4,2.6)": 1}, {"[4.0,4.4)": 1}, {"[4.4,4.8)": 1}, {"[4.8,5.2)": 1}, {"[5.2,5.6)": 2}, {"[5.6,6.0)": 2}, {"[6.4,7.2)": 1}, {"[7.2,8.0)": 1}]
(4 rows)
```
2. Next call we try to get testing query and it wasn't in the table 6 seconds ago
```
query|calls|total_time|min_time|max_time|mean_time|rows|yb_latency_histogram
select .... for update|177921|204594.267284999|0.843289|48.732094|1.14991635211694|177921|[{"[0.8,0.9)": 448}, {"[0.9,1.0)": 25183}, {"[1.0,1.1)": 55601}, {"[1.1,1.2)": 47761}, {"[1.2,1.3)": 22473}, {"[1.3,1.4)": 14205}, {"[1.4,1.5)": 7348}, {"[1.5,1.6)": 2998}, {"[1.6,1.8)": 1353}, {"[1.8,2.0)": 253}, {"[2.0,2.2)": 94}, {"[2.2,2.4)": 44}, {"[2.4,2.6)": 22}, {"[2.6,2.8)": 23}, {"[2.8,3.0)": 12}, {"[3.0,3.2)": 10}, {"[3.2,3.6)": 9}, {"[3.6,4.0)": 6}, {"[4.0,4.4)": 7}, {"[4.4,4.8)": 3}, {"[4.8,5.2)": 4}, {"[5.2,5.6)": 3}, {"[5.6,6.0)": 3}, {"[6.0,6.4)": 4}, {"[6.4,7.2)": 2}, {"[7.2,8.0)": 5}, {"[8.0,8.8)": 3}, {"[8.8,9.6)": 1}, {"[9.6,10.4)": 2}, {"[10.4,11.2)": 5}, {"[12.0,12.8)": 3}, {"[12.8,14.4)": 1}, {"[14.4,16.0)": 2}, {"[16.0,17.6)": 1}, {"[17.6,19.2)": 5}, {"[19.2,20.8)": 8}, {"[20.8,22.4)": 6}, {"[22.4,24.0)": 2}, {"[24.0,25.6)": 2}, {"[25.6,28.8)": 3}, {"[28.8,32.0)": 1}, {"[32.0,35.2)": 1}, {"[48.0,51.2)": 1}]
(1 row)
```
### Warning: Please confirm that this issue does not contain any sensitive information
- [X] I confirm this issue does not contain any sensitive information.
[DB-7712]: https://yugabyte.atlassian.net/browse/DB-7712?atlOrigin=eyJpIjoiNWRkNTljNzYxNjVmNDY3MDlhMDU5Y2ZhYzA5YTRkZjUiLCJwIjoiZ2l0aHViLWNvbS1KU1cifQ | priority | ysqlsh select from pg stat statements may return inconsistent results depending on hosts sent jira link description example of calling select statement against pg stat statements table in the test we select all current rows select query calls total time min time max time mean time rows yb latency histogram from pg stat statements query calls total time min time max time mean time rows yb latency histogram select from write read test where id delete from write read test where id select jsonb agg x from select version as x insert into write read test values on conflict do nothing rows next call we try to get testing query and it wasn t in the table seconds ago query calls total time min time max time mean time rows yb latency histogram select for update row warning please confirm that this issue does not contain any sensitive information i confirm this issue does not contain any sensitive information | 1 |
486,062 | 14,003,748,686 | IssuesEvent | 2020-10-28 16:14:57 | AY2021S1-CS2103T-T12-4/tp | https://api.github.com/repos/AY2021S1-CS2103T-T12-4/tp | closed | Automate appointment expiry | priority.Medium :2nd_place_medal: type.Enhancement :+1: | As a nurse, I can check the expired appointments without manually checking and removing, such that my time can be optimized. | 1.0 | Automate appointment expiry - As a nurse, I can check the expired appointments without manually checking and removing, such that my time can be optimized. | priority | automate appointment expiry as a nurse i can check the expired appointments without manually checking and removing such that my time can be optimized | 1 |
482,889 | 13,915,321,805 | IssuesEvent | 2020-10-21 00:19:18 | StrangeLoopGames/EcoIssues | https://api.github.com/repos/StrangeLoopGames/EcoIssues | closed | Eco Tree Polish | Category: Web Priority: Medium | - [x] Add a date and label for the work status people set, to see that it's current:
ie:
'9/1/20 work status:
Fixing UI issues'
- [x] Dont display updates older than a week
- [x] Jeff: Reapply shiny-rays from users onto the tree (the little animation)
- [x] Make the fades happen faster when you mouse over
- [x] When you mouse over, make it highlight the node on the tree they are working on
- [ ] Jeff: Can't tell the difference between 'feature complete' and 'polished' colors in the key or tree. | 1.0 | Eco Tree Polish - - [x] Add a date and label for the work status people set, to see that it's current:
ie:
'9/1/20 work status:
Fixing UI issues'
- [x] Dont display updates older than a week
- [x] Jeff: Reapply shiny-rays from users onto the tree (the little animation)
- [x] Make the fades happen faster when you mouse over
- [x] When you mouse over, make it highlight the node on the tree they are working on
- [ ] Jeff: Can't tell the difference between 'feature complete' and 'polished' colors in the key or tree. | priority | eco tree polish add a date and label for the work status people set to see that it s current ie work status fixing ui issues dont display updates older than a week jeff reapply shiny rays from users onto the tree the little animation make the fades happen faster when you mouse over when you mouse over make it highlight the node on the tree they are working on jeff can t tell the difference between feature complete and polished colors in the key or tree | 1 |
184,092 | 6,701,227,000 | IssuesEvent | 2017-10-11 08:52:04 | craftercms/craftercms | https://api.github.com/repos/craftercms/craftercms | closed | [studio] Add an API to rename folder | enhancement Priority: Medium | Please add an API to rename a folder per spec:
TBD (add spec) | 1.0 | [studio] Add an API to rename folder - Please add an API to rename a folder per spec:
TBD (add spec) | priority | add an api to rename folder please add an api to rename a folder per spec tbd add spec | 1 |
284,145 | 8,736,077,471 | IssuesEvent | 2018-12-11 18:30:48 | craftercms/craftercms | https://api.github.com/repos/craftercms/craftercms | opened | [studio] Add clustering menu mechanics via the upgrade manager to existing sites | bug priority: medium | Upgrading Studio doesn't add the clustering menu to the administrator. Please use the upgrade manager to add that menu to the list of menu items available to the admin.
The menu lives here `data/repos/global/configuration/global-menu-config.xml`
@avasquez614 knows about the menu items
@jdrossl knows about the upgrade manager
Remember to use XSLT to add the missing menu item and not overwrite the file. | 1.0 | [studio] Add clustering menu mechanics via the upgrade manager to existing sites - Upgrading Studio doesn't add the clustering menu to the administrator. Please use the upgrade manager to add that menu to the list of menu items available to the admin.
The menu lives here `data/repos/global/configuration/global-menu-config.xml`
@avasquez614 knows about the menu items
@jdrossl knows about the upgrade manager
Remember to use XSLT to add the missing menu item and not overwrite the file. | priority | add clustering menu mechanics via the upgrade manager to existing sites upgrading studio doesn t add the clustering menu to the administrator please use the upgrade manager to add that menu to the list of menu items available to the admin the menu lives here data repos global configuration global menu config xml knows about the menu items jdrossl knows about the upgrade manager remember to use xslt to add the missing menu item and not overwrite the file | 1 |
588,409 | 17,659,907,006 | IssuesEvent | 2021-08-21 09:20:46 | nimblehq/nimble-medium-ios | https://api.github.com/repos/nimblehq/nimble-medium-ios | opened | As a user, I can edit my own article | type : feature category : backend priority : medium | ## Why
The users will be able to edit their own article and publish the new changes to the server.
## Acceptance Criteria
- [ ] Implement the API for updating an article via this [endpoint](https://github.com/gothinkster/realworld/tree/master/api#update-article).
- [ ] The endpoint takes the article's `slug` as the parameter in the request url.
- [ ] Need to provide the new article data in the request body, the accepted fields are: `title`, `description`, `body` and `tagList`. Here is a sample request body:
```
{
"article": {
"title": "Did you train your dragon?"
}
}
````
- [ ] Create a usecase for updating an article for later usage in integrate task.
- [ ] Parse the response into the corresponding model, here is an example response for creating an article:
```
{
"article": {
"slug": "how-to-train-your-dragon",
"title": "How to train your dragon",
"description": "Ever wonder how?",
"body": "It takes a Jacobian",
"tagList": ["dragons", "training"],
"createdAt": "2016-02-18T03:22:56.637Z",
"updatedAt": "2016-02-18T03:48:35.824Z",
"favorited": false,
"favoritesCount": 0,
"author": {
"username": "jake",
"bio": "I work at statefarm",
"image": "https://i.stack.imgur.com/xHWG8.jpg",
"following": false
}
}
}
``` | 1.0 | As a user, I can edit my own article - ## Why
The users will be able to edit their own article and publish the new changes to the server.
## Acceptance Criteria
- [ ] Implement the API for updating an article via this [endpoint](https://github.com/gothinkster/realworld/tree/master/api#update-article).
- [ ] The endpoint takes the article's `slug` as the parameter in the request url.
- [ ] Need to provide the new article data in the request body, the accepted fields are: `title`, `description`, `body` and `tagList`. Here is a sample request body:
```
{
"article": {
"title": "Did you train your dragon?"
}
}
````
- [ ] Create a usecase for updating an article for later usage in integrate task.
- [ ] Parse the response into the corresponding model, here is an example response for creating an article:
```
{
"article": {
"slug": "how-to-train-your-dragon",
"title": "How to train your dragon",
"description": "Ever wonder how?",
"body": "It takes a Jacobian",
"tagList": ["dragons", "training"],
"createdAt": "2016-02-18T03:22:56.637Z",
"updatedAt": "2016-02-18T03:48:35.824Z",
"favorited": false,
"favoritesCount": 0,
"author": {
"username": "jake",
"bio": "I work at statefarm",
"image": "https://i.stack.imgur.com/xHWG8.jpg",
"following": false
}
}
}
``` | priority | as a user i can edit my own article why the users will be able to edit their own article and publish the new changes to the server acceptance criteria implement the api for updating an article via this the endpoint takes the article s slug as the parameter in the request url need to provide the new article data in the request body the accepted fields are title description body and taglist here is a sample request body article title did you train your dragon create a usecase for updating an article for later usage in integrate task parse the response into the corresponding model here is an example response for creating an article article slug how to train your dragon title how to train your dragon description ever wonder how body it takes a jacobian taglist createdat updatedat favorited false favoritescount author username jake bio i work at statefarm image following false | 1 |
755,725 | 26,437,892,704 | IssuesEvent | 2023-01-15 16:12:17 | codidact/qpixel | https://api.github.com/repos/codidact/qpixel | closed | Give search box focus when you open the panel | area: html/css/js type: change request priority: medium complexity: unassessed | https://meta.codidact.com/posts/287030
When you click on "search", the panel opens and there's a textbox. But you can't start typing your query yet; first you have to click into the box. (From the keyboard, it's not a single tab, either.) Can we give the textbox focus automatically when you start a search?
| 1.0 | Give search box focus when you open the panel - https://meta.codidact.com/posts/287030
When you click on "search", the panel opens and there's a textbox. But you can't start typing your query yet; first you have to click into the box. (From the keyboard, it's not a single tab, either.) Can we give the textbox focus automatically when you start a search?
| priority | give search box focus when you open the panel when you click on search the panel opens and there s a textbox but you can t start typing your query yet first you have to click into the box from the keyboard it s not a single tab either can we give the textbox focus automatically when you start a search | 1 |
25,605 | 2,683,861,095 | IssuesEvent | 2015-03-28 11:55:54 | ConEmu/old-issues | https://api.github.com/repos/ConEmu/old-issues | closed | ConEmu.Maximus5.100129a: некорректный переход по вкладкам плагином | 2–5 stars bug imported Priority-Medium wontfix | _From [formir...@gmail.com](https://code.google.com/u/102391973814753343160/) on January 31, 2010 11:41:14_
Версия ОС: Windows 2003 sp 1
Версия FAR: Far20b1363.x86.20100131
Описание бага:
При нахождении в редакторе либо вьюере, при использовании опций `#4` и `#5`
(переход на соседнюю вкладку) прилагающего плагина, перехода как такового
не происходит: меняется вкладка на таббаре, но содержимое консоли остается
прежним (т.е. — редактор/вьюер). При этом таббар перестает выделяться мышой.
Как воспроизвести:
1. Запустить фар в conemu.
2. Открыть любой файл на редактирование.
3. Вызвать по F11 плагин «поддержка ConEmu ».
4. Выбрать 4-й пункт «на предыдущую вкладку».
5. ???????
6. !!!!!!!
_Original issue: http://code.google.com/p/conemu-maximus5/issues/detail?id=166_ | 1.0 | ConEmu.Maximus5.100129a: некорректный переход по вкладкам плагином - _From [formir...@gmail.com](https://code.google.com/u/102391973814753343160/) on January 31, 2010 11:41:14_
Версия ОС: Windows 2003 sp 1
Версия FAR: Far20b1363.x86.20100131
Описание бага:
При нахождении в редакторе либо вьюере, при использовании опций `#4` и `#5`
(переход на соседнюю вкладку) прилагающего плагина, перехода как такового
не происходит: меняется вкладка на таббаре, но содержимое консоли остается
прежним (т.е. — редактор/вьюер). При этом таббар перестает выделяться мышой.
Как воспроизвести:
1. Запустить фар в conemu.
2. Открыть любой файл на редактирование.
3. Вызвать по F11 плагин «поддержка ConEmu ».
4. Выбрать 4-й пункт «на предыдущую вкладку».
5. ???????
6. !!!!!!!
_Original issue: http://code.google.com/p/conemu-maximus5/issues/detail?id=166_ | priority | conemu некорректный переход по вкладкам плагином from on january версия ос windows sp версия far описание бага при нахождении в редакторе либо вьюере при использовании опций и переход на соседнюю вкладку прилагающего плагина перехода как такового не происходит меняется вкладка на таббаре но содержимое консоли остается прежним т е — редактор вьюер при этом таббар перестает выделяться мышой как воспроизвести запустить фар в conemu открыть любой файл на редактирование вызвать по плагин «поддержка conemu » выбрать й пункт «на предыдущую вкладку» original issue | 1 |
90,215 | 3,812,926,042 | IssuesEvent | 2016-03-27 23:10:23 | senderle/topic-modeling-tool | https://api.github.com/repos/senderle/topic-modeling-tool | closed | Allow custom delimiters | irritant priority-medium | Right now output and metadata input delimiters are hard-coded as commas. That should be configurable. | 1.0 | Allow custom delimiters - Right now output and metadata input delimiters are hard-coded as commas. That should be configurable. | priority | allow custom delimiters right now output and metadata input delimiters are hard coded as commas that should be configurable | 1 |
782,979 | 27,512,986,521 | IssuesEvent | 2023-03-06 10:05:56 | Riksrevisjonen/noAPI | https://api.github.com/repos/Riksrevisjonen/noAPI | opened | Add SSB classification (Klass) API endpoints | Priority: 3-Medium Type: 2-Enhancement | SSB maintains a list of statistical classifications and code lists. Some of these codes are of particular interest in data analytics works. We should build support for fetching data through the Klass API endpoint. These endpoints are not easily found, nor properly named (using ids instead of names), so we will need a naming scheme in the R functions that is more sensible for the user. The following classifications should be considered for noAPI:
* [Classification of county](https://www.ssb.no/en/klass/klassifikasjoner/104)
* [Classification of county municipality](https://www.ssb.no/en/klass/klassifikasjoner/127)
* [Classification of municipalities](https://www.ssb.no/en/klass/klassifikasjoner/131)
* [Classification of country codes](https://www.ssb.no/en/klass/klassifikasjoner/552)
In addition to supporting the current classification, the functions should also support fetching _versions_ of the classification by year. | 1.0 | Add SSB classification (Klass) API endpoints - SSB maintains a list of statistical classifications and code lists. Some of these codes are of particular interest in data analytics works. We should build support for fetching data through the Klass API endpoint. These endpoints are not easily found, nor properly named (using ids instead of names), so we will need a naming scheme in the R functions that is more sensible for the user. The following classifications should be considered for noAPI:
* [Classification of county](https://www.ssb.no/en/klass/klassifikasjoner/104)
* [Classification of county municipality](https://www.ssb.no/en/klass/klassifikasjoner/127)
* [Classification of municipalities](https://www.ssb.no/en/klass/klassifikasjoner/131)
* [Classification of country codes](https://www.ssb.no/en/klass/klassifikasjoner/552)
In addition to supporting the current classification, the functions should also support fetching _versions_ of the classification by year. | priority | add ssb classification klass api endpoints ssb maintains a list of statistical classifications and code lists some of these codes are of particular interest in data analytics works we should build support for fetching data through the klass api endpoint these endpoints are not easily found nor properly named using ids instead of names so we will need a naming scheme in the r functions that is more sensible for the user the following classifications should be considered for noapi in addition to supporting the current classification the functions should also support fetching versions of the classification by year | 1 |
28,652 | 2,708,458,039 | IssuesEvent | 2015-04-08 09:05:12 | ondras/wwwsqldesigner | https://api.github.com/repos/ondras/wwwsqldesigner | closed | 'Cancel create table' not working | bug imported Priority-Medium wontfix | _From [i...@amarosia.com](https://code.google.com/u/115984126334797849605/) on April 23, 2009 04:19:34_
What steps will reproduce the problem? 1. Add a table
2. Cancel operation 3. What is the expected output? What do you see instead? if 'cancel' is selected, a blank table is still inserted on page. No table
should be created. What version of the product are you using? On what operating system? 2.3.2 Ubuntu 8.10 Please provide any additional information below.
_Original issue: http://code.google.com/p/wwwsqldesigner/issues/detail?id=15_ | 1.0 | 'Cancel create table' not working - _From [i...@amarosia.com](https://code.google.com/u/115984126334797849605/) on April 23, 2009 04:19:34_
What steps will reproduce the problem? 1. Add a table
2. Cancel operation 3. What is the expected output? What do you see instead? if 'cancel' is selected, a blank table is still inserted on page. No table
should be created. What version of the product are you using? On what operating system? 2.3.2 Ubuntu 8.10 Please provide any additional information below.
_Original issue: http://code.google.com/p/wwwsqldesigner/issues/detail?id=15_ | priority | cancel create table not working from on april what steps will reproduce the problem add a table cancel operation what is the expected output what do you see instead if cancel is selected a blank table is still inserted on page no table should be created what version of the product are you using on what operating system ubuntu please provide any additional information below original issue | 1 |
536,086 | 15,703,751,781 | IssuesEvent | 2021-03-26 14:13:53 | bexis/Module_EventManagement | https://api.github.com/repos/bexis/Module_EventManagement | opened | Participitation limit cannot be 0 (=unlimited) | Priority: Medium bug | The UI is correcting the value to 1 always. 0 should be accepted OR a checkbox with option to chose unlimited. | 1.0 | Participitation limit cannot be 0 (=unlimited) - The UI is correcting the value to 1 always. 0 should be accepted OR a checkbox with option to chose unlimited. | priority | participitation limit cannot be unlimited the ui is correcting the value to always should be accepted or a checkbox with option to chose unlimited | 1 |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.