INSTRUCTION stringlengths 1 46.3k | RESPONSE stringlengths 75 80.2k |
|---|---|
This facilitates using communication timeouts to perform
synchronization as quickly as possible, while supporting high latency
connections with a tunable worst case performance. Fast connections
should be read almost immediately. Worst case performance for this
method is timeout_multipli... | def try_read_prompt(self, timeout_multiplier):
'''This facilitates using communication timeouts to perform
synchronization as quickly as possible, while supporting high latency
connections with a tunable worst case performance. Fast connections
should be read almost immediately. Worst ca... |
This attempts to find the prompt. Basically, press enter and record
the response; press enter again and record the response; if the two
responses are similar then assume we are at the original prompt.
This can be a slow function. Worst case with the default sync_multiplier
can take 12 se... | def sync_original_prompt (self, sync_multiplier=1.0):
'''This attempts to find the prompt. Basically, press enter and record
the response; press enter again and record the response; if the two
responses are similar then assume we are at the original prompt.
This can be a slow function. W... |
This logs the user into the given server.
It uses
'original_prompt' to try to find the prompt right after login. When it
finds the prompt it immediately tries to reset the prompt to something
more easily matched. The default 'original_prompt' is very optimistic
and is easily foo... | def login (self, server, username, password='', terminal_type='ansi',
original_prompt=r"[#$]", login_timeout=10, port=None,
auto_prompt_reset=True, ssh_key=None, quiet=True,
sync_multiplier=1, check_local_ip=True,
password_regex=r'(?i)(?:password:)|(?:pass... |
Sends exit to the remote shell.
If there are stopped jobs then this automatically sends exit twice. | def logout (self):
'''Sends exit to the remote shell.
If there are stopped jobs then this automatically sends exit twice.
'''
self.sendline("exit")
index = self.expect([EOF, "(?i)there are stopped jobs"])
if index==1:
self.sendline("exit")
self.ex... |
Match the next shell prompt.
This is little more than a short-cut to the :meth:`~pexpect.spawn.expect`
method. Note that if you called :meth:`login` with
``auto_prompt_reset=False``, then before calling :meth:`prompt` you must
set the :attr:`PROMPT` attribute to a regex that it will use... | def prompt(self, timeout=-1):
'''Match the next shell prompt.
This is little more than a short-cut to the :meth:`~pexpect.spawn.expect`
method. Note that if you called :meth:`login` with
``auto_prompt_reset=False``, then before calling :meth:`prompt` you must
set the :attr:`PROM... |
This sets the remote prompt to something more unique than ``#`` or ``$``.
This makes it easier for the :meth:`prompt` method to match the shell prompt
unambiguously. This method is called automatically by the :meth:`login`
method, but you may want to call it manually if you somehow reset the
... | def set_unique_prompt(self):
'''This sets the remote prompt to something more unique than ``#`` or ``$``.
This makes it easier for the :meth:`prompt` method to match the shell prompt
unambiguously. This method is called automatically by the :meth:`login`
method, but you may want to call ... |
Return a string representing the user agent. | def user_agent():
"""
Return a string representing the user agent.
"""
data = {
"installer": {"name": "pip", "version": pipenv.patched.notpip.__version__},
"python": platform.python_version(),
"implementation": {
"name": platform.python_implementation(),
},
... |
Convert a file: URL to a path. | def url_to_path(url):
# type: (str) -> str
"""
Convert a file: URL to a path.
"""
assert url.startswith('file:'), (
"You can only turn file: urls into filenames (not %r)" % url)
_, netloc, path, _, _ = urllib_parse.urlsplit(url)
# if we have a UNC path, prepend UNC share notation
... |
Convert a path to a file: URL. The path will be made absolute and have
quoted path parts. | def path_to_url(path):
# type: (Union[str, Text]) -> str
"""
Convert a path to a file: URL. The path will be made absolute and have
quoted path parts.
"""
path = os.path.normpath(os.path.abspath(path))
url = urllib_parse.urljoin('file:', urllib_request.pathname2url(path))
return url |
Return True if `name` is a considered as an archive file. | def is_archive_file(name):
# type: (str) -> bool
"""Return True if `name` is a considered as an archive file."""
ext = splitext(name)[1].lower()
if ext in ARCHIVE_EXTENSIONS:
return True
return False |
Return whether a file:// Link points to a directory.
``link`` must not have any other scheme but file://. Call is_file_url()
first. | def is_dir_url(link):
# type: (Link) -> bool
"""Return whether a file:// Link points to a directory.
``link`` must not have any other scheme but file://. Call is_file_url()
first.
"""
link_path = url_to_path(link.url_without_fragment)
return os.path.isdir(link_path) |
Unpack link into location.
If download_dir is provided and link points to a file, make a copy
of the link file inside download_dir. | def unpack_file_url(
link, # type: Link
location, # type: str
download_dir=None, # type: Optional[str]
hashes=None # type: Optional[Hashes]
):
# type: (...) -> None
"""Unpack link into location.
If download_dir is provided and link points to a file, make a copy
of the link file insi... |
Copy distribution files in `link_path` to `location`.
Invoked when user requests to install a local directory. E.g.:
pip install .
pip install ~/dev/git-repos/python-prompt-toolkit | def _copy_dist_from_dir(link_path, location):
"""Copy distribution files in `link_path` to `location`.
Invoked when user requests to install a local directory. E.g.:
pip install .
pip install ~/dev/git-repos/python-prompt-toolkit
"""
# Note: This is currently VERY SLOW if you have a ... |
Unpack link.
If link is a VCS link:
if only_download, export into download_dir and ignore location
else unpack into location
for other types of link:
- unpack into location
- if download_dir, copy the file into download_dir
- if only_download, mark location fo... | def unpack_url(
link, # type: Optional[Link]
location, # type: Optional[str]
download_dir=None, # type: Optional[str]
only_download=False, # type: bool
session=None, # type: Optional[PipSession]
hashes=None, # type: Optional[Hashes]
progress_bar="on" # type: str
):
# type: (...) -... |
Check download_dir for previously downloaded file with correct hash
If a correct file is found return its path else None | def _check_download_dir(link, download_dir, hashes):
# type: (Link, str, Hashes) -> Optional[str]
""" Check download_dir for previously downloaded file with correct hash
If a correct file is found return its path else None
"""
download_path = os.path.join(download_dir, link.filename)
if os.p... |
Create a pool key out of a request context dictionary.
According to RFC 3986, both the scheme and host are case-insensitive.
Therefore, this function normalizes both before constructing the pool
key for an HTTPS request. If you wish to change this behaviour, provide
alternate callables to ``key_fn_by_s... | def _default_key_normalizer(key_class, request_context):
"""
Create a pool key out of a request context dictionary.
According to RFC 3986, both the scheme and host are case-insensitive.
Therefore, this function normalizes both before constructing the pool
key for an HTTPS request. If you wish to ch... |
Create a new :class:`ConnectionPool` based on host, port, scheme, and
any additional pool keyword arguments.
If ``request_context`` is provided, it is provided as keyword arguments
to the pool class used. This method is used to actually create the
connection pools handed out by :meth:`c... | def _new_pool(self, scheme, host, port, request_context=None):
"""
Create a new :class:`ConnectionPool` based on host, port, scheme, and
any additional pool keyword arguments.
If ``request_context`` is provided, it is provided as keyword arguments
to the pool class used. This me... |
Get a :class:`ConnectionPool` based on the host, port, and scheme.
If ``port`` isn't given, it will be derived from the ``scheme`` using
``urllib3.connectionpool.port_by_scheme``. If ``pool_kwargs`` is
provided, it is merged with the instance's ``connection_pool_kw``
variable and used t... | def connection_from_host(self, host, port=None, scheme='http', pool_kwargs=None):
"""
Get a :class:`ConnectionPool` based on the host, port, and scheme.
If ``port`` isn't given, it will be derived from the ``scheme`` using
``urllib3.connectionpool.port_by_scheme``. If ``pool_kwargs`` is... |
Get a :class:`ConnectionPool` based on the request context.
``request_context`` must at least contain the ``scheme`` key and its
value must be a key in ``key_fn_by_scheme`` instance variable. | def connection_from_context(self, request_context):
"""
Get a :class:`ConnectionPool` based on the request context.
``request_context`` must at least contain the ``scheme`` key and its
value must be a key in ``key_fn_by_scheme`` instance variable.
"""
scheme = request_co... |
Get a :class:`ConnectionPool` based on the provided pool key.
``pool_key`` should be a namedtuple that only contains immutable
objects. At a minimum it must have the ``scheme``, ``host``, and
``port`` fields. | def connection_from_pool_key(self, pool_key, request_context=None):
"""
Get a :class:`ConnectionPool` based on the provided pool key.
``pool_key`` should be a namedtuple that only contains immutable
objects. At a minimum it must have the ``scheme``, ``host``, and
``port`` fields... |
Similar to :func:`urllib3.connectionpool.connection_from_url`.
If ``pool_kwargs`` is not provided and a new pool needs to be
constructed, ``self.connection_pool_kw`` is used to initialize
the :class:`urllib3.connectionpool.ConnectionPool`. If ``pool_kwargs``
is provided, it is used inst... | def connection_from_url(self, url, pool_kwargs=None):
"""
Similar to :func:`urllib3.connectionpool.connection_from_url`.
If ``pool_kwargs`` is not provided and a new pool needs to be
constructed, ``self.connection_pool_kw`` is used to initialize
the :class:`urllib3.connectionpoo... |
Merge a dictionary of override values for self.connection_pool_kw.
This does not modify self.connection_pool_kw and returns a new dict.
Any keys in the override dictionary with a value of ``None`` are
removed from the merged dictionary. | def _merge_pool_kwargs(self, override):
"""
Merge a dictionary of override values for self.connection_pool_kw.
This does not modify self.connection_pool_kw and returns a new dict.
Any keys in the override dictionary with a value of ``None`` are
removed from the merged dictionary... |
Same as :meth:`urllib3.connectionpool.HTTPConnectionPool.urlopen`
with custom cross-host redirect logic and only sends the request-uri
portion of the ``url``.
The given ``url`` parameter must be absolute, such that an appropriate
:class:`urllib3.connectionpool.ConnectionPool` can be cho... | def urlopen(self, method, url, redirect=True, **kw):
"""
Same as :meth:`urllib3.connectionpool.HTTPConnectionPool.urlopen`
with custom cross-host redirect logic and only sends the request-uri
portion of the ``url``.
The given ``url`` parameter must be absolute, such that an appr... |
Sets headers needed by proxies: specifically, the Accept and Host
headers. Only sets headers not provided by the user. | def _set_proxy_headers(self, url, headers=None):
"""
Sets headers needed by proxies: specifically, the Accept and Host
headers. Only sets headers not provided by the user.
"""
headers_ = {'Accept': '*/*'}
netloc = parse_url(url).netloc
if netloc:
head... |
Same as HTTP(S)ConnectionPool.urlopen, ``url`` must be absolute. | def urlopen(self, method, url, redirect=True, **kw):
"Same as HTTP(S)ConnectionPool.urlopen, ``url`` must be absolute."
u = parse_url(url)
if u.scheme == "http":
# For proxied HTTPS requests, httplib sets the necessary headers
# on the CONNECT to the proxy. For HTTP, we'... |
Returns a set of all variables in the AST that will be looked up from
the context at runtime. Because at compile time it's not known which
variables will be used depending on the path the execution takes at
runtime, all variables are returned.
>>> from jinja2 import Environment, meta
>>> env = Env... | def find_undeclared_variables(ast):
"""Returns a set of all variables in the AST that will be looked up from
the context at runtime. Because at compile time it's not known which
variables will be used depending on the path the execution takes at
runtime, all variables are returned.
>>> from jinja2... |
Finds all the referenced templates from the AST. This will return an
iterator over all the hardcoded template extensions, inclusions and
imports. If dynamic inheritance or inclusion is used, `None` will be
yielded.
>>> from jinja2 import Environment, meta
>>> env = Environment()
>>> ast = env... | def find_referenced_templates(ast):
"""Finds all the referenced templates from the AST. This will return an
iterator over all the hardcoded template extensions, inclusions and
imports. If dynamic inheritance or inclusion is used, `None` will be
yielded.
>>> from jinja2 import Environment, meta
... |
Remember all undeclared identifiers. | def enter_frame(self, frame):
"""Remember all undeclared identifiers."""
CodeGenerator.enter_frame(self, frame)
for _, (action, param) in iteritems(frame.symbols.loads):
if action == 'resolve':
self.undeclared_identifiers.add(param) |
Parse a marker string and return a dictionary containing a marker expression.
The dictionary will contain keys "op", "lhs" and "rhs" for non-terminals in
the expression grammar, or strings. A string contained in quotes is to be
interpreted as a literal string, and a string not contained in quotes is a
... | def parse_marker(marker_string):
"""
Parse a marker string and return a dictionary containing a marker expression.
The dictionary will contain keys "op", "lhs" and "rhs" for non-terminals in
the expression grammar, or strings. A string contained in quotes is to be
interpreted as a literal string, a... |
Parse a requirement passed in as a string. Return a Container
whose attributes contain the various parts of the requirement. | def parse_requirement(req):
"""
Parse a requirement passed in as a string. Return a Container
whose attributes contain the various parts of the requirement.
"""
remaining = req.strip()
if not remaining or remaining.startswith('#'):
return None
m = IDENTIFIER.match(remaining)
if n... |
Return 'pathname' as a name that will work on the native filesystem.
The path is split on '/' and put back together again using the current
directory separator. Needed because filenames in the setup script are
always supplied in Unix style, and have to be converted to the local
convention before we ca... | def convert_path(pathname):
"""Return 'pathname' as a name that will work on the native filesystem.
The path is split on '/' and put back together again using the current
directory separator. Needed because filenames in the setup script are
always supplied in Unix style, and have to be converted to th... |
Return the default base location for distlib caches. If the directory does
not exist, it is created. Use the suffix provided for the base directory,
and default to '.distlib' if it isn't provided.
On Windows, if LOCALAPPDATA is defined in the environment, then it is
assumed to be a directory, and will ... | def get_cache_base(suffix=None):
"""
Return the default base location for distlib caches. If the directory does
not exist, it is created. Use the suffix provided for the base directory,
and default to '.distlib' if it isn't provided.
On Windows, if LOCALAPPDATA is defined in the environment, then i... |
Convert an absolute path to a directory name for use in a cache.
The algorithm used is:
#. On Windows, any ``':'`` in the drive is replaced with ``'---'``.
#. Any occurrence of ``os.sep`` is replaced with ``'--'``.
#. ``'.cache'`` is appended. | def path_to_cache_dir(path):
"""
Convert an absolute path to a directory name for use in a cache.
The algorithm used is:
#. On Windows, any ``':'`` in the drive is replaced with ``'---'``.
#. Any occurrence of ``os.sep`` is replaced with ``'--'``.
#. ``'.cache'`` is appended.
"""
d, p ... |
Extract name, version, python version from a filename (no extension)
Return name, version, pyver or None | def split_filename(filename, project_name=None):
"""
Extract name, version, python version from a filename (no extension)
Return name, version, pyver or None
"""
result = None
pyver = None
filename = unquote(filename).replace(' ', '-')
m = PYTHON_VERSION.search(filename)
if m:
... |
A utility method used to get name and version from a string.
From e.g. a Provides-Dist value.
:param p: A value in a form 'foo (1.0)'
:return: The name and version as a tuple. | def parse_name_and_version(p):
"""
A utility method used to get name and version from a string.
From e.g. a Provides-Dist value.
:param p: A value in a form 'foo (1.0)'
:return: The name and version as a tuple.
"""
m = NAME_VERSION_RE.match(p)
if not m:
raise DistlibException('... |
zip a directory tree into a BytesIO object | def zip_dir(directory):
"""zip a directory tree into a BytesIO object"""
result = io.BytesIO()
dlen = len(directory)
with ZipFile(result, "w") as zf:
for root, dirs, files in os.walk(directory):
for name in files:
full = os.path.join(root, name)
rel = ... |
Extended globbing function that supports ** and {opt1,opt2,opt3}. | def iglob(path_glob):
"""Extended globbing function that supports ** and {opt1,opt2,opt3}."""
if _CHECK_RECURSIVE_GLOB.search(path_glob):
msg = """invalid glob %r: recursive glob "**" must be used alone"""
raise ValueError(msg % path_glob)
if _CHECK_MISMATCH_SET.search(path_glob):
ms... |
Tell if the target is newer than the source.
Returns true if 'source' exists and is more recently modified than
'target', or if 'source' exists and 'target' doesn't.
Returns false if both exist and 'target' is the same age or younger
than 'source'. Raise PackagingFileError if 'source' ... | def newer(self, source, target):
"""Tell if the target is newer than the source.
Returns true if 'source' exists and is more recently modified than
'target', or if 'source' exists and 'target' doesn't.
Returns false if both exist and 'target' is the same age or younger
than 'so... |
Copy a file respecting dry-run and force flags. | def copy_file(self, infile, outfile, check=True):
"""Copy a file respecting dry-run and force flags.
"""
self.ensure_dir(os.path.dirname(outfile))
logger.info('Copying %s to %s', infile, outfile)
if not self.dry_run:
msg = None
if check:
if... |
Commit recorded changes, turn off recording, return
changes. | def commit(self):
"""
Commit recorded changes, turn off recording, return
changes.
"""
assert self.record
result = self.files_written, self.dirs_created
self._init_record()
return result |
Clear the cache. | def clear(self):
"""
Clear the cache.
"""
not_removed = []
for fn in os.listdir(self.base):
fn = os.path.join(self.base, fn)
try:
if os.path.islink(fn) or os.path.isfile(fn):
os.remove(fn)
elif os.path.is... |
Add a subscriber for an event.
:param event: The name of an event.
:param subscriber: The subscriber to be added (and called when the
event is published).
:param append: Whether to append or prepend the subscriber to an
existing subscriber list ... | def add(self, event, subscriber, append=True):
"""
Add a subscriber for an event.
:param event: The name of an event.
:param subscriber: The subscriber to be added (and called when the
event is published).
:param append: Whether to append or prepend th... |
Remove a subscriber for an event.
:param event: The name of an event.
:param subscriber: The subscriber to be removed. | def remove(self, event, subscriber):
"""
Remove a subscriber for an event.
:param event: The name of an event.
:param subscriber: The subscriber to be removed.
"""
subs = self._subscribers
if event not in subs:
raise ValueError('No subscribers: %r' % ... |
Publish a event and return a list of values returned by its
subscribers.
:param event: The event to publish.
:param args: The positional arguments to pass to the event's
subscribers.
:param kwargs: The keyword arguments to pass to the event's
... | def publish(self, event, *args, **kwargs):
"""
Publish a event and return a list of values returned by its
subscribers.
:param event: The event to publish.
:param args: The positional arguments to pass to the event's
subscribers.
:param kwargs: The k... |
Default converter for the inc:// protocol. | def inc_convert(self, value):
"""Default converter for the inc:// protocol."""
if not os.path.isabs(value):
value = os.path.join(self.base, value)
with codecs.open(value, 'r', encoding='utf-8') as f:
result = json.load(f)
return result |
Read lines from a subprocess' output stream and either pass to a progress
callable (if specified) or write progress information to sys.stderr. | def reader(self, stream, context):
"""
Read lines from a subprocess' output stream and either pass to a progress
callable (if specified) or write progress information to sys.stderr.
"""
progress = self.progress
verbose = self.verbose
while True:
s = st... |
Query the PyPI RSS feed and return a list
of XML items. | def _get(pypi_server):
"""
Query the PyPI RSS feed and return a list
of XML items.
"""
response = requests.get(pypi_server)
if response.status_code >= 300:
raise HTTPError(status_code=response.status_code,
reason=response.reason)
if hasattr(response.content, '... |
Constructs a request to the PyPI server and returns a list of
:class:`yarg.parse.Package`.
:param pypi_server: (option) URL to the PyPI server.
>>> import yarg
>>> yarg.newest_packages()
[<Package yarg>, <Package gray>, <Package ragy>] | def newest_packages(
pypi_server="https://pypi.python.org/pypi?%3Aaction=packages_rss"):
"""
Constructs a request to the PyPI server and returns a list of
:class:`yarg.parse.Package`.
:param pypi_server: (option) URL to the PyPI server.
>>> import yarg
>>> yarg.newest_packages(... |
Produce a mapping of identifier: requirement from the section. | def _get_requirements(model, section_name):
"""Produce a mapping of identifier: requirement from the section.
"""
if not model:
return {}
return {identify_requirment(r): r for r in (
requirementslib.Requirement.from_pipfile(name, package._data)
for name, package in model.get(sect... |
Produce a mapping containing all candidates derived from `identifiers`.
`identifiers` should provide a collection of requirement identifications
from a section (i.e. `packages` or `dev-packages`). This function uses
`trace` to filter out candidates in the state that are present because of
an entry in t... | def _collect_derived_entries(state, traces, identifiers):
"""Produce a mapping containing all candidates derived from `identifiers`.
`identifiers` should provide a collection of requirement identifications
from a section (i.e. `packages` or `dev-packages`). This function uses
`trace` to filter out cand... |
Lock specified (abstract) requirements into (concrete) candidates.
The locking procedure consists of four stages:
* Resolve versions and dependency graph (powered by ResolveLib).
* Walk the graph to determine "why" each candidate came to be, i.e.
what top-level requirements result in... | def lock(self):
"""Lock specified (abstract) requirements into (concrete) candidates.
The locking procedure consists of four stages:
* Resolve versions and dependency graph (powered by ResolveLib).
* Walk the graph to determine "why" each candidate came to be, i.e.
what top-l... |
Configures and sets up all of the logging
Returns the requested logging level, as its integer value. | def setup_logging(verbosity, no_color, user_log_file):
"""Configures and sets up all of the logging
Returns the requested logging level, as its integer value.
"""
# Determine the level to be logging at.
if verbosity >= 1:
level = "DEBUG"
elif verbosity == -1:
level = "WARNING"
... |
Calls the standard formatter, but will indent all of the log messages
by our current indentation level. | def format(self, record):
"""
Calls the standard formatter, but will indent all of the log messages
by our current indentation level.
"""
formatted = super(IndentingFormatter, self).format(record)
prefix = ''
if self.add_timestamp:
prefix = self.format... |
Return whether the handler is using sys.stdout. | def _using_stdout(self):
"""
Return whether the handler is using sys.stdout.
"""
if WINDOWS and colorama:
# Then self.stream is an AnsiToWin32 object.
return self.stream.wrapped is sys.stdout
return self.stream is sys.stdout |
Helper to convert config values to boolean as ConfigParser do. | def _cast_boolean(value):
"""
Helper to convert config values to boolean as ConfigParser do.
"""
_BOOLEANS = {'1': True, 'yes': True, 'true': True, 'on': True,
'0': False, 'no': False, 'false': False, 'off': False, '': False}
value = str(value)
if value.lower() not in _BOOLEANS:... |
Return the value for option or default if defined. | def getenv(option, default=undefined, cast=undefined):
"""
Return the value for option or default if defined.
"""
# We can't avoid __contains__ because value may be empty.
if option in os.environ:
value = os.environ[option]
else:
if isinstance(default, Undefined):
ra... |
Given a list of option strings this joins them in the most appropriate
way and returns them in the form ``(formatted_string,
any_prefix_is_slash)`` where the second item in the tuple is a flag that
indicates if any of the option prefixes was a slash. | def join_options(options):
"""Given a list of option strings this joins them in the most appropriate
way and returns them in the form ``(formatted_string,
any_prefix_is_slash)`` where the second item in the tuple is a flag that
indicates if any of the option prefixes was a slash.
"""
rv = []
... |
Writes a usage line into the buffer.
:param prog: the program name.
:param args: whitespace separated list of arguments.
:param prefix: the prefix for the first line. | def write_usage(self, prog, args='', prefix='Usage: '):
"""Writes a usage line into the buffer.
:param prog: the program name.
:param args: whitespace separated list of arguments.
:param prefix: the prefix for the first line.
"""
usage_prefix = '%*s%s ' % (self.current_i... |
Writes re-indented text into the buffer. This rewraps and
preserves paragraphs. | def write_text(self, text):
"""Writes re-indented text into the buffer. This rewraps and
preserves paragraphs.
"""
text_width = max(self.width - self.current_indent, 11)
indent = ' ' * self.current_indent
self.write(wrap_text(text, text_width,
... |
Writes a definition list into the buffer. This is how options
and commands are usually formatted.
:param rows: a list of two item tuples for the terms and values.
:param col_max: the maximum width of the first column.
:param col_spacing: the number of spaces between the first and
... | def write_dl(self, rows, col_max=30, col_spacing=2):
"""Writes a definition list into the buffer. This is how options
and commands are usually formatted.
:param rows: a list of two item tuples for the terms and values.
:param col_max: the maximum width of the first column.
:par... |
Helpful context manager that writes a paragraph, a heading,
and the indents.
:param name: the section name that is written as heading. | def section(self, name):
"""Helpful context manager that writes a paragraph, a heading,
and the indents.
:param name: the section name that is written as heading.
"""
self.write_paragraph()
self.write_heading(name)
self.indent()
try:
yield
... |
Returns a better error message when invalid configuration option
is provided. | def invalid_config_error_message(action, key, val):
"""Returns a better error message when invalid configuration option
is provided."""
if action in ('store_true', 'store_false'):
return ("{0} is not a valid value for {1} option, "
"please specify a boolean value like yes/no, "
... |
Return a comma-separated list of option strings and metavars.
:param option: tuple of (short opt, long opt), e.g: ('-f', '--format')
:param mvarfmt: metavar format string - evaluated as mvarfmt % metavar
:param optsep: separator | def _format_option_strings(self, option, mvarfmt=' <%s>', optsep=', '):
"""
Return a comma-separated list of option strings and metavars.
:param option: tuple of (short opt, long opt), e.g: ('-f', '--format')
:param mvarfmt: metavar format string - evaluated as mvarfmt % metavar
... |
Ensure there is only one newline between usage and the first heading
if there is no description. | def format_usage(self, usage):
"""
Ensure there is only one newline between usage and the first heading
if there is no description.
"""
msg = '\nUsage: %s\n' % self.indent_lines(textwrap.dedent(usage), " ")
return msg |
Insert an OptionGroup at a given position. | def insert_option_group(self, idx, *args, **kwargs):
"""Insert an OptionGroup at a given position."""
group = self.add_option_group(*args, **kwargs)
self.option_groups.pop()
self.option_groups.insert(idx, group)
return group |
Get a list of all options, including those in option groups. | def option_list_all(self):
"""Get a list of all options, including those in option groups."""
res = self.option_list[:]
for i in self.option_groups:
res.extend(i.option_list)
return res |
Updates the given defaults with values from the config files and
the environ. Does a little special handling for certain types of
options (lists). | def _update_defaults(self, defaults):
"""Updates the given defaults with values from the config files and
the environ. Does a little special handling for certain types of
options (lists)."""
# Accumulate complex default state.
self.values = optparse.Values(self.defaults)
... |
Overriding to make updating the defaults after instantiation of
the option parser possible, _update_defaults() does the dirty work. | def get_default_values(self):
"""Overriding to make updating the defaults after instantiation of
the option parser possible, _update_defaults() does the dirty work."""
if not self.process_default_values:
# Old, pre-Optik 1.5 behaviour.
return optparse.Values(self.defaults... |
Helper utility for reimporting previously imported modules while inside the env | def safe_import(self, name):
"""Helper utility for reimporting previously imported modules while inside the env"""
module = None
if name not in self._modules:
self._modules[name] = importlib.import_module(name)
module = self._modules[name]
if not module:
d... |
Given a local distribution and a working set, returns all dependencies from the set.
:param dist: A single distribution to find the dependencies of
:type dist: :class:`pkg_resources.Distribution`
:param working_set: A working set to search for all packages
:type working_set: :class:`pkg... | def resolve_dist(cls, dist, working_set):
"""Given a local distribution and a working set, returns all dependencies from the set.
:param dist: A single distribution to find the dependencies of
:type dist: :class:`pkg_resources.Distribution`
:param working_set: A working set to search fo... |
Returns the context appropriate paths for the environment.
:return: A dictionary of environment specific paths to be used for installation operations
:rtype: dict
.. note:: The implementation of this is borrowed from a combination of pip and
virtualenv and is likely to change at som... | def base_paths(self):
"""
Returns the context appropriate paths for the environment.
:return: A dictionary of environment specific paths to be used for installation operations
:rtype: dict
.. note:: The implementation of this is borrowed from a combination of pip and
... |
Path to the environment python | def python(self):
"""Path to the environment python"""
py = vistir.compat.Path(self.base_paths["scripts"]).joinpath("python").absolute().as_posix()
if not py:
return vistir.compat.Path(sys.executable).as_posix()
return py |
The system path inside the environment
:return: The :data:`sys.path` from the environment
:rtype: list | def sys_path(self):
"""
The system path inside the environment
:return: The :data:`sys.path` from the environment
:rtype: list
"""
from .vendor.vistir.compat import JSONDecodeError
current_executable = vistir.compat.Path(sys.executable).as_posix()
if not... |
The prefix run inside the context of the environment
:return: The python prefix inside the environment
:rtype: :data:`sys.prefix` | def sys_prefix(self):
"""
The prefix run inside the context of the environment
:return: The python prefix inside the environment
:rtype: :data:`sys.prefix`
"""
command = [self.python, "-c" "import sys; print(sys.prefix)"]
c = vistir.misc.run(command, return_obje... |
Get the pip version in the environment. Useful for knowing which args we can use
when installing. | def pip_version(self):
"""
Get the pip version in the environment. Useful for knowing which args we can use
when installing.
"""
from .vendor.packaging.version import parse as parse_version
pip = next(iter(
pkg for pkg in self.get_installed_packages() if pkg.... |
Retrives the distributions installed on the library path of the environment
:return: A set of distributions found on the library path
:rtype: iterator | def get_distributions(self):
"""
Retrives the distributions installed on the library path of the environment
:return: A set of distributions found on the library path
:rtype: iterator
"""
pkg_resources = self.safe_import("pkg_resources")
libdirs = self.base_path... |
Find an egg by name in the given environment | def find_egg(self, egg_dist):
"""Find an egg by name in the given environment"""
site_packages = self.libdir[1]
search_filename = "{0}.egg-link".format(egg_dist.project_name)
try:
user_site = site.getusersitepackages()
except AttributeError:
user_site = si... |
Determine whether the supplied distribution is in the environment. | def dist_is_in_project(self, dist):
"""Determine whether the supplied distribution is in the environment."""
from .project import _normalized
prefixes = [
_normalized(prefix) for prefix in self.base_paths["libdirs"].split(os.pathsep)
if _normalized(prefix).startswith(_nor... |
Given a package name, returns whether it is installed in the environment
:param str pkgname: The name of a package
:return: Whether the supplied package is installed in the environment
:rtype: bool | def is_installed(self, pkgname):
"""Given a package name, returns whether it is installed in the environment
:param str pkgname: The name of a package
:return: Whether the supplied package is installed in the environment
:rtype: bool
"""
return any(d for d in self.get_d... |
Run a python command in the enviornment context.
:param cmd: A command to run in the environment - runs with `python -c`
:type cmd: str or list
:param str cwd: The working directory in which to execute the command, defaults to :data:`os.curdir`
:return: A finished command object
... | def run_py(self, cmd, cwd=os.curdir):
"""Run a python command in the enviornment context.
:param cmd: A command to run in the environment - runs with `python -c`
:type cmd: str or list
:param str cwd: The working directory in which to execute the command, defaults to :data:`os.curdir`
... |
Runs the environment's inline activation script | def run_activate_this(self):
"""Runs the environment's inline activation script"""
if self.is_venv:
activate_this = os.path.join(self.scripts_dir, "activate_this.py")
if not os.path.isfile(activate_this):
raise OSError("No such file: {0!s}".format(activate_this))
... |
Helper context manager to activate the environment.
This context manager will set the following variables for the duration
of its activation:
* sys.prefix
* sys.path
* os.environ["VIRTUAL_ENV"]
* os.environ["PATH"]
In addition, it will make any ... | def activated(self, include_extras=True, extra_dists=None):
"""Helper context manager to activate the environment.
This context manager will set the following variables for the duration
of its activation:
* sys.prefix
* sys.path
* os.environ["VIRTUAL_ENV"]
... |
A context manager which allows uninstallation of packages from the environment
:param str pkgname: The name of a package to uninstall
>>> env = Environment("/path/to/env/root")
>>> with env.uninstall("pytz", auto_confirm=True, verbose=False) as uninstaller:
cleaned = uninstalle... | def uninstall(self, pkgname, *args, **kwargs):
"""A context manager which allows uninstallation of packages from the environment
:param str pkgname: The name of a package to uninstall
>>> env = Environment("/path/to/env/root")
>>> with env.uninstall("pytz", auto_confirm=True, verbose=F... |
Convert a string to a null-terminated bytes object. | def stn(s, length, encoding, errors):
"""Convert a string to a null-terminated bytes object.
"""
s = s.encode(encoding, errors)
return s[:length] + (length - len(s)) * NUL |
Convert a null-terminated bytes object to a string. | def nts(s, encoding, errors):
"""Convert a null-terminated bytes object to a string.
"""
p = s.find(b"\0")
if p != -1:
s = s[:p]
return s.decode(encoding, errors) |
Convert a number field to a python number. | def nti(s):
"""Convert a number field to a python number.
"""
# There are two possible encodings for a number field, see
# itn() below.
if s[0] != chr(0o200):
try:
n = int(nts(s, "ascii", "strict") or "0", 8)
except ValueError:
raise InvalidHeaderError("invali... |
Convert a python number to a number field. | def itn(n, digits=8, format=DEFAULT_FORMAT):
"""Convert a python number to a number field.
"""
# POSIX 1003.1-1988 requires numbers to be encoded as a string of
# octal digits followed by a null-byte, this allows values up to
# (8**(digits-1))-1. GNU tar allows storing numbers greater than
# tha... |
Calculate the checksum for a member's header by summing up all
characters except for the chksum field which is treated as if
it was filled with spaces. According to the GNU tar sources,
some tars (Sun and NeXT) calculate chksum with signed char,
which will be different if there are chars in ... | def calc_chksums(buf):
"""Calculate the checksum for a member's header by summing up all
characters except for the chksum field which is treated as if
it was filled with spaces. According to the GNU tar sources,
some tars (Sun and NeXT) calculate chksum with signed char,
which will be di... |
Copy length bytes from fileobj src to fileobj dst.
If length is None, copy the entire content. | def copyfileobj(src, dst, length=None):
"""Copy length bytes from fileobj src to fileobj dst.
If length is None, copy the entire content.
"""
if length == 0:
return
if length is None:
while True:
buf = src.read(16*1024)
if not buf:
break
... |
Convert a file's mode to a string of the form
-rwxrwxrwx.
Used by TarFile.list() | def filemode(mode):
"""Convert a file's mode to a string of the form
-rwxrwxrwx.
Used by TarFile.list()
"""
perm = []
for table in filemode_table:
for bit, char in table:
if mode & bit == bit:
perm.append(char)
break
else:
... |
Return True if name points to a tar archive that we
are able to handle, else return False. | def is_tarfile(name):
"""Return True if name points to a tar archive that we
are able to handle, else return False.
"""
try:
t = open(name)
t.close()
return True
except TarError:
return False |
Initialize for writing with gzip compression. | def _init_write_gz(self):
"""Initialize for writing with gzip compression.
"""
self.cmp = self.zlib.compressobj(9, self.zlib.DEFLATED,
-self.zlib.MAX_WBITS,
self.zlib.DEF_MEM_LEVEL,
... |
Write string s to the stream. | def write(self, s):
"""Write string s to the stream.
"""
if self.comptype == "gz":
self.crc = self.zlib.crc32(s, self.crc)
self.pos += len(s)
if self.comptype != "tar":
s = self.cmp.compress(s)
self.__write(s) |
Write string s to the stream if a whole new block
is ready to be written. | def __write(self, s):
"""Write string s to the stream if a whole new block
is ready to be written.
"""
self.buf += s
while len(self.buf) > self.bufsize:
self.fileobj.write(self.buf[:self.bufsize])
self.buf = self.buf[self.bufsize:] |
Close the _Stream object. No operation should be
done on it afterwards. | def close(self):
"""Close the _Stream object. No operation should be
done on it afterwards.
"""
if self.closed:
return
if self.mode == "w" and self.comptype != "tar":
self.buf += self.cmp.flush()
if self.mode == "w" and self.buf:
s... |
Initialize for reading a gzip compressed fileobj. | def _init_read_gz(self):
"""Initialize for reading a gzip compressed fileobj.
"""
self.cmp = self.zlib.decompressobj(-self.zlib.MAX_WBITS)
self.dbuf = b""
# taken from gzip.GzipFile with some alterations
if self.__read(2) != b"\037\213":
raise ReadError("not ... |
Set the stream's file pointer to pos. Negative seeking
is forbidden. | def seek(self, pos=0):
"""Set the stream's file pointer to pos. Negative seeking
is forbidden.
"""
if pos - self.pos >= 0:
blocks, remainder = divmod(pos - self.pos, self.bufsize)
for i in range(blocks):
self.read(self.bufsize)
self.... |
Return the next size number of bytes from the stream.
If size is not defined, return all bytes of the stream
up to EOF. | def read(self, size=None):
"""Return the next size number of bytes from the stream.
If size is not defined, return all bytes of the stream
up to EOF.
"""
if size is None:
t = []
while True:
buf = self._read(self.bufsize)
... |
Return size bytes from the stream. | def _read(self, size):
"""Return size bytes from the stream.
"""
if self.comptype == "tar":
return self.__read(size)
c = len(self.dbuf)
while c < size:
buf = self.__read(self.bufsize)
if not buf:
break
try:
... |
Return size bytes from stream. If internal buffer is empty,
read another block from the stream. | def __read(self, size):
"""Return size bytes from stream. If internal buffer is empty,
read another block from the stream.
"""
c = len(self.buf)
while c < size:
buf = self.fileobj.read(self.bufsize)
if not buf:
break
self.buf... |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.