model_id stringlengths 1 7 | name stringlengths 2 210 | description stringlengths 0 253k | tags listlengths 0 494 | printables_category stringclasses 80
values | image_paths listlengths 0 289 | stl_paths listlengths 0 2.73k | license stringclasses 7
values | source stringlengths 34 40 | shard_file stringclasses 49
values |
|---|---|---|---|---|---|---|---|---|---|
342510 | Screw Top D20 Dice Box V2 |
<p>New Version of my Dice Box.</p>
<p>First Picture is Xerathul's make.</p>
<p><a href="https://www.patreon.com/stormcrow13">I am starting a patreon</a></p>
<p>When putting the lid on have the 2 between the 10 and 12 to close properly, at larger scales you may need to put the 2 between 10 and 16.</p>
<p>If the lid i... | [
"thingiverse"
] | Toys & Games > Board Games | [
"342510/images/image_1_compressed.jpg",
"342510/images/image_2_compressed.jpg",
"342510/images/image_3_compressed.jpg",
"342510/images/image_4_compressed.jpg",
"342510/images/image_5_compressed.jpg",
"342510/images/image_6_compressed.jpg",
"342510/images/image_7_compressed.jpg",
"342510/images/image_8... | [
"342510/stls/D20_box_7_base.stl",
"342510/stls/D20_box_7_blank_base.stl",
"342510/stls/D20_box_7_blank_top.stl",
"342510/stls/D20_box_7_top.stl"
] | CC-BY | https://www.printables.com/model/342510 | data_0031.tar |
929124 | Screw Top Fire Hydrant Container | <p>A fire hydrant container with a simple screw on lid.</p><p> </p><h3>Printing</h3><ul><li>Designed for 0.2mm layer heights and 0.4mm line widths.</li><li>All parts can be printed without supports.</li></ul><p> </p><h3>Assembly</h3><ul><li>Secure side and front outlets with glue or M3 bolts (up to 8- 15mm lo... | [
"box",
"container",
"screwtop",
"firehydrant",
"screwlid",
"hydrant"
] | Household > Other House Equipment | [
"929124/images/image_1_compressed.jpg"
] | [
"929124/stls/Bottom.stl",
"929124/stls/Demo - Assembled.stl",
"929124/stls/Front Outlet.stl",
"929124/stls/Side Outlet.stl",
"929124/stls/Top.stl"
] | CC-BY | https://www.printables.com/model/929124 | data_0031.tar |
593473 | Screw Top Lid Rugged Cylindrical Container | <p>Screw Top Lid Rugged Cylindrical Container M10x1.5 Thread.</p><p><strong>For the rest of the set go to:</strong> <a href="https://www.printables.com/model/641022-universal-rugged-knurling-pattern-cylindrical-cont">https://www.printables.com/model/641022-universal-rugged-knurling-pattern-cylindrical-cont</a></p><p><a... | [
"box",
"3d",
"functional",
"holder",
"container",
"small",
"lid",
"household",
"storage",
"storagebox",
"accessory",
"screw",
"thread",
"metric",
"outdoor",
"travel",
"jar",
"edc",
"smallpartsstorage"
] | Hobby & Makers > Organizers | [
"593473/images/image_1_compressed.jpg",
"593473/images/image_2_compressed.jpg",
"593473/images/image_3_compressed.jpg",
"593473/images/image_4_compressed.jpg",
"593473/images/image_5_compressed.jpg",
"593473/images/image_6_compressed.jpg",
"593473/images/image_7_compressed.jpg",
"593473/images/image_8... | [
"593473/stls/BOTTOM.stl",
"593473/stls/TOP.stl"
] | GPL2.0 | https://www.printables.com/model/593473 | data_0031.tar |
700280 | Screw Top Toothpick Holder | <p>A screw top toothpick holder. Prints without supports. </p><p>There is tolerance built into the screw so no adjustments should be needed.</p><p> </p><p>Fits 65mm toothpicks</p> | [
"case",
"lid",
"cylinder",
"screw",
"top",
"toothpick"
] | Hobby & Makers > Organizers | [
"700280/images/image_1_compressed.jpg",
"700280/images/image_2_compressed.jpg",
"700280/images/image_3_compressed.jpg"
] | [
"700280/stls/toothpick_base.stl",
"700280/stls/toothpick_lid.stl"
] | CC-BY | https://www.printables.com/model/700280 | data_0031.tar |
641861 | Screw tray | <p>Small 120 x 90 mm screw tray with multiple sections for different size screws and easy sorting. All corners are rounded so you can print this quite fast. Set your wall count to 10 to remove all infill or set to 100% infill.</p><ul><li>1.5mm bottom layer</li><li>4.5mm deep with rounded inside corners</li><li>2mm wall... | [
"organizer",
"part",
"tray",
"screw"
] | Hobby & Makers > Organizers | [
"641861/images/image_1_compressed.jpg"
] | [
"641861/stls/120x90mm_parts_tray.stl"
] | CC-BY | https://www.printables.com/model/641861 | data_0031.tar |
689544 | Screw You Present | <p>A screw together container, perfect for a present. The small container is the perfect size for a gift card and takes 16 screws and will fit inside the large one. The large one takes 32 screws.</p> | [
"screws",
"present",
"joke",
"puzzlebox",
"locked",
"screwyou"
] | Toys & Games > Puzzles & Brain-teasers | [
"689544/images/image_1_compressed.jpg",
"689544/images/image_2_compressed.jpg",
"689544/images/image_3_compressed.jpg",
"689544/images/image_4_compressed.jpg",
"689544/images/image_5_compressed.jpg"
] | [
"689544/stls/Key.stl",
"689544/stls/Large Container Lid.stl",
"689544/stls/Large Container Screw.stl",
"689544/stls/Large Container.stl",
"689544/stls/Small Container Screw.stl",
"689544/stls/Small Container.stl",
"689544/stls/Small Lock Container Lid.stl"
] | CC0 | https://www.printables.com/model/689544 | data_0031.tar |
24148 | Screw-in PTFE Clip (Holder) | <p>A little screw-in clip for holding a 2mm inner diameter (ID), ~4mm outer diameter PTFE tube in place (you know, the bog standard Teflon tube used in 3D printing). Screw it in somewhere (carefully--not too tight or it'll break) and you can use it to guide your PTFE tube to where you want it.</p>
<p>I made this becaus... | [
"mmu",
"mmu2",
"ptfe",
"ptfeguide",
"prusai3mk3mmu2",
"thingiverse",
"prusammu",
"teflontube",
"teflontubeclip"
] | 3D Printers > Accessories | [
"24148/images/image_1_compressed.jpg",
"24148/images/image_2_compressed.jpg",
"24148/images/image_3_compressed.jpg"
] | [
"24148/stls/screw-in_ptfe_holder.stl"
] | CC-BY | https://www.printables.com/model/24148 | data_0031.tar |
598761 | Screwable (Raspberry Pi Zero case/Zero W case/Zero 2 W case (2h print)) | <p>Just a remix to be able screw RPi to frame using tnuts.</p> | [] | 3D Printers > Accessories | [
"598761/images/image_1_compressed.jpg",
"598761/images/image_2_compressed.jpg"
] | [
"598761/stls/RPI_case_body.stl"
] | GPL3.0 | https://www.printables.com/model/598761 | data_0031.tar |
206810 | Screwdriver + Electrical Enclosure Key / Šroubovák + Klíč k rozvaděči | <p>Nástroj se třemi klíči na odemykání rozvaděčů a šestihranným 6mm slotem na prodlužovací nástavec k bitovému šroubováku. Rukojeť s postranními klíči přidává lepší úchop a větší točivý moment pro povolování šroubů/matic.</p><p>Čtyřhranný klíč ve variantách: 6mm, 7mm, 8mm.</p><p>A tool with three keys for opening elect... | [
"holder",
"triangle",
"bit",
"key",
"cabinet",
"screwdriver",
"square",
"electrical",
"screwdriverbit",
"bitholder",
"sroubovak",
"klic",
"nastavec",
"rittal",
"rozvadec",
"electricalenclosure"
] | Hobby & Makers > Tools | [
"206810/images/image_1_compressed.jpg",
"206810/images/image_2_compressed.jpg",
"206810/images/image_3_compressed.jpg",
"206810/images/image_4_compressed.jpg",
"206810/images/image_5_compressed.jpg",
"206810/images/image_6_compressed.jpg"
] | [
"206810/stls/enclosure_key_final_6mm_square.stl",
"206810/stls/enclosure_key_final_7mm_square.stl",
"206810/stls/enclosure_key_final_8mm_square.stl"
] | CC-BY | https://www.printables.com/model/206810 | data_0031.tar |
44552 | Screwdriver 25mm Hex Bit Box 63 slot with small place for adapters | <p>This is remixed a 63 slot 25mm Screwdriver Bit box with additional small space for other bits and reductions.<br/>
Original is designed by Jonny. All thanks goes to Jonny.</p>
<h3>Print instructions</h3><p>Original note by Jonny: I Adjusted the Infill and perimeters in PrusaSlicer to above 50% at the hinges to incre... | [
"box",
"case",
"container",
"hexbit",
"screwbit"
] | Hobby & Makers > Tools | [
"44552/images/image_1_compressed.jpg"
] | [
"44552/stls/lower-body.stl",
"44552/stls/upper-body.stl"
] | CC-BY | https://www.printables.com/model/44552 | data_0031.tar |
198774 | Screwdriver holder for Kupper (Kuepper, Küpper) pegboard | <p><strong>Consists of two pieces to fit print volume (Left / Right)</strong></p><p><strong>Features:</strong></p><ul><li>21x holes for screwdrivers</li><li>1x hole for scissors</li><li>6x hooks on the side (eg for tape measure, utility knife)</li><li>Has a stepped design to facilitate easy viewing and grabbing.</li></... | [
"organizer",
"pegboard",
"freecad",
"screwdriverholder",
"kuepper",
"kupper"
] | Hobby & Makers > Organizers | [
"198774/images/image_1_compressed.jpg",
"198774/images/image_2_compressed.jpg"
] | [
"198774/stls/V3-Left.stl",
"198774/stls/V3-Right.stl"
] | CC-BY | https://www.printables.com/model/198774 | data_0031.tar |
504353 | Screwdriver Holder Skadis | <p>The 5 holders "tight" version is the most space effective. If you want more space in between, then the other versions are c.t.c. 40 mm like the holes in the Skadis board.</p> | [
"holder",
"pegboard",
"screwdriver",
"skadis",
"screwdriverholder",
"clickin"
] | Hobby & Makers > Organizers | [
"504353/images/image_1_compressed.jpg"
] | [
"504353/stls/Screwdriver holder skadis 1.stl",
"504353/stls/Screwdriver holder skadis 4.stl",
"504353/stls/Screwdriver holder skadis 5 tight.stl",
"504353/stls/Screwdriver holder skadis 5.stl",
"504353/stls/Screwdriver holder skadis 6.stl"
] | CC-BY | https://www.printables.com/model/504353 | data_0031.tar |
102242 | Screwdriver Holder Wall Mount | Some holders for screwdriver | Download free 3D printable STL models | [
"wall",
"holder",
"mount",
"rack",
"screwdriver",
"driver",
"schraubendreher",
"halter",
"schraubenzieher"
] | Hobby & Makers > Organizers | [
"102242/images/image_1_compressed.jpg",
"102242/images/image_2_compressed.jpg",
"102242/images/image_3_compressed.jpg",
"102242/images/image_4_compressed.jpg"
] | [
"102242/stls/8.5mm_kurz.stl",
"102242/stls/Schraubendreher_Halterung_5mm.stl",
"102242/stls/Schraubendreher_Halterung_8.5mm.stl"
] | CC0 | https://www.printables.com/model/102242 | data_0031.tar |
895903 | Screwdriver Spool Rewinder | <p>Adapter to connect your spool to a screwdriver.</p><p><strong>It needs a 6mm HEX bit.</strong></p><p> </p><h3><strong>Print settings :</strong></h3><ul><li>Printer model : Creality K1C</li><li>Filament : Creality PLA</li><li>Layer height : 0.2mm</li><li>Infill density : 15%</li><li>Infill pattern : Gyroid</li><... | [
"spool",
"rewinder",
"adapter",
"screwdriver"
] | Household > Garage | [
"895903/images/image_1_compressed.jpg",
"895903/images/image_2_compressed.jpg",
"895903/images/image_3_compressed.jpg",
"895903/images/image_4_compressed.jpg",
"895903/images/image_5_compressed.jpg"
] | [
"895903/stls/Screwdriver Spool - Bolt.stl",
"895903/stls/Screwdriver Spool - Screw.stl"
] | GPL2.0 | https://www.printables.com/model/895903 | data_0031.tar |
482700 | Screwdrivers Rack For Honeycomb | <p>Honeycomb rack for 9 screwdrivers. </p><p>After enlarging 3 holes with 11mm drill - it fits perfectly with Parkside (Lidl) Electric safe Screwdrivers (as show on the photos).</p><p> </p><p><strong>Printing instructions:</strong></p><p>Printed with 0.6 mm nozzle, 0.3 layer, 20% infill, optional supports for... | [
"honeycomb",
"screwdriver",
"parkside",
"screwdriverholder",
"lidl",
"honeycombstoragewall"
] | Hobby & Makers > Tools | [
"482700/images/image_1_compressed.jpg",
"482700/images/image_2_compressed.jpg",
"482700/images/image_3_compressed.jpg",
"482700/images/image_4_compressed.jpg"
] | [
"482700/stls/Rack screwdriver.stl"
] | CC-BY | https://www.printables.com/model/482700 | data_0031.tar |
9268 | Screwless IKEA LACK (Superposer des table Ikea Lack sans vises) | <p>Helps you stack two or more IKEA LACK tables on each other without screws, and with Logo Prusa.<br/>
Vous permettez de superposer des table Ikea (Lack) sans vises, et avec le logo de Prusa ;).</p>
| [
"table",
"ikea",
"ikeaenclosure",
"ikealack",
"lacktable",
"lack",
"screwless",
"3dprint",
"lackenclosure"
] | 3D Printers > Accessories | [
"9268/images/image_1_compressed.jpg",
"9268/images/image_2_compressed.jpg",
"9268/images/image_3_compressed.jpg",
"9268/images/image_4_compressed.jpg"
] | [
"9268/stls/lackupwithlogo.stl"
] | CC0 | https://www.printables.com/model/9268 | data_0031.tar |
104163 | Screws for Kids (Bosch) | <p>Hi,<br>this is set of screws and nuts, screwdriver and plate. The set is compatible with Bosch Tool Box for kids.<br>Recomended printer settings is 0.16mm layer high and 20% infill density.</p><p>Do you like this model please check my <a href="https://www.printables.com/model/1008760-formula-1-race-car-2023-building... | [
"forkids",
"bosch",
"screw",
"thingiverse"
] | 3D Printers > Other Printer Parts & Upgrades | [
"104163/images/image_1_compressed.jpg",
"104163/images/image_2_compressed.jpg",
"104163/images/image_3_compressed.jpg",
"104163/images/image_4_compressed.jpg"
] | [
"104163/stls/Bosch_Screw_Plate_5x5.stl",
"104163/stls/Nut.stl",
"104163/stls/Plate.stl",
"104163/stls/Screwdriver_Handle.stl",
"104163/stls/Screwdriver_Tip.stl",
"104163/stls/Screw_30mm.stl",
"104163/stls/Screw_40mm.stl",
"104163/stls/Wrench_20mm.stl"
] | CC-BY | https://www.printables.com/model/104163 | data_0031.tar |
7335 | Screwtop Nozzle Container | <p>A small 60mm x 25mm screwtop container to protect your spare nozzles.</p>
<p>Original structure based on eldonb46's excellent Parametric Screw Top Container - Style 2, Thingiverse <a href="https://www.thingiverse.com/thing:3803194">https://www.thingiverse.com/thing:3803194</a></p>
<p>Container holds fifteen E3D v6 n... | [
"nozzle",
"storage",
"e3dv6"
] | 3D Printers > Accessories | [
"7335/images/image_1_compressed.jpg",
"7335/images/image_2_compressed.jpg",
"7335/images/image_3_compressed.jpg"
] | [
"7335/stls/nozzle-screwtop-base.stl",
"7335/stls/nozzle-screwtop-lid-mmu2.stl",
"7335/stls/nozzle-screwtop-lid.stl"
] | CC-BY | https://www.printables.com/model/7335 | data_0031.tar |
97112 | Scrooge McDuck Gold Coin / Dollar Coin | <p>Coin diameter, 5cm (2" approx)</p> | [
"coin",
"game",
"gold",
"disney",
"coins",
"counter",
"boardgame",
"medal",
"thingiverse",
"dollar",
"currency",
"medallion",
"mcduck",
"scrooge",
"dollars",
"dollarsymbol",
"onedollar"
] | Costumes & Accessories > Props | [
"97112/images/image_1_compressed.jpg"
] | [
"97112/stls/dollar_coin.stl"
] | CC-BY | https://www.printables.com/model/97112 | data_0031.tar |
809721 | Scrub Daddy Dryer | <p>Update 04/14: Revised design to have a flush bottom eliminate the need for supports if you have good bridging capability :)<br><br>Vertical drying rack for one or two scrub daddy sponges. The grove on the bottom matches my sink but included the f3d (fusion) files and could be easily adjusted to match your setup.</p>... | [] | Household > Kitchen | [
"809721/images/image_1_compressed.jpg"
] | [
"809721/stls/Double Scrub Daddy V2 (flush bottom).stl",
"809721/stls/Scrub Daddy V2.stl"
] | CC-BY | https://www.printables.com/model/809721 | data_0031.tar |
314976 | SCRUB DADDY HOLDER | <p>The Scrub Daddy! It's the Apple phone of sponges - overpriced but seemingly for good reason. I hated leaving my Scrub Daddy sitting looking pitiful on the counter top; so what did I do? I went a made a nice little mount for him! (Or her if you're using the Scrub Mommy. I don't judge). All you need to do is print it,... | [
"cute"
] | Household > Kitchen | [
"314976/images/image_1_compressed.jpg",
"314976/images/image_2_compressed.jpg"
] | [
"314976/stls/Scrub Daddy Holder v1.stl"
] | CC-BY | https://www.printables.com/model/314976 | data_0031.tar |
1553665 | Scrub Daddy Holder with Jointed Legs | <p>My wife asked me to make a holder for the scrub daddy sponge and this is the result. It sits on the side of the sink with an outlet for the water</p><p>This is a new design with print in place jointed legs, in the original the legs clipped on but had a tendency to fall off</p><p>It's simple print, I used PLA, 3 loop... | [
"holder",
"sponge",
"scrub",
"scrubdaddy",
"scrubmummy",
"scrubdaddyholder"
] | Household > Kitchen | [
"1553665/images/image_1_compressed.jpg",
"1553665/images/image_2_compressed.jpg"
] | [
"1553665/stls/scrub holder with jointed legs.stl"
] | CC-BY | https://www.printables.com/model/1553665 | data_0031.tar |
531834 | Scrubby for Bambu Lab X1C X1 P1P P1S (Chamber Filter Duct) | <p><i>This is tested and installed on my P1P, and I am happy to inform you all that it works well!</i></p><p><i><strong>Please note, this is not an ‘exhaust’ duct. It is meant to recirculate the chamber air after filtering.</strong></i></p><p>I reverse-engineered this from a friend's Bambu Lab X1C exhaust duct. It seam... | [
"upgrade",
"filter",
"fume",
"carbon",
"hepa",
"exhaust",
"fumeextractor",
"chamber",
"carbonfilter",
"hepafilter",
"exhaustduct",
"bambulabx1",
"bambulab",
"bambulabx1carbon",
"exhaustvent",
"bambulabp1p"
] | 3D Printers > Bambu Lab Parts & Upgrades | [
"531834/images/image_1_compressed.jpg",
"531834/images/image_2_compressed.jpg",
"531834/images/image_3_compressed.jpg",
"531834/images/image_4_compressed.jpg",
"531834/images/image_5_compressed.jpg",
"531834/images/image_6_compressed.jpg",
"531834/images/image_7_compressed.jpg"
] | [
"531834/stls/Bolt-on Block-off Plate.stl",
"531834/stls/Carbon Tray V1.stl",
"531834/stls/Carbon Tray V2.stl",
"531834/stls/Main Body.stl",
"531834/stls/Stick-on Block-off Plate.stl"
] | CC-BY | https://www.printables.com/model/531834 | data_0031.tar |
72913 | Scuba Diving Line Markers | <p>Well, after several years, I have decided to redo this model and add more markers! There is now a version 2 of the directional marker. This version has a more rounded tip, is more aesthetic, and has larger holes on the bottom to fit brass snap bolts. I will leave version 1 up for those that prefer ... | [
"marker",
"diving",
"cave",
"cavern",
"scuba",
"scubadiving",
"wreck",
"scubadive"
] | Hobby & Makers > Tools | [
"72913/images/image_1_compressed.jpg",
"72913/images/image_10_compressed.jpg",
"72913/images/image_11_compressed.jpg",
"72913/images/image_12_compressed.jpg",
"72913/images/image_13_compressed.jpg",
"72913/images/image_2_compressed.jpg",
"72913/images/image_3_compressed.jpg",
"72913/images/image_4_com... | [
"72913/stls/CircleMarkerV1.stl",
"72913/stls/DirectionalMarkerV1.stl",
"72913/stls/DirectionalMarkerV2.stl",
"72913/stls/RectangleMarkerV1.stl",
"72913/stls/SquareMarkerV1.stl"
] | CC-BY | https://www.printables.com/model/72913 | data_0031.tar |
226107 | SCUF Xbox One Controller Stand | <p>Controller stand that fits SCUF Instinct Pro controllers. This will also fit Xbox One S/X controllers.</p> | [
"stand",
"controller",
"xbox",
"scuf"
] | Toys & Games > Other Toys & Games | [
"226107/images/image_1_compressed.jpg",
"226107/images/image_2_compressed.jpg",
"226107/images/image_3_compressed.jpg",
"226107/images/image_4_compressed.jpg",
"226107/images/image_5_compressed.jpg"
] | [
"226107/stls/XBOX SCUF Instinct Pro Controller Stand Logo.stl",
"226107/stls/XBOX SCUF Instinct Pro Controller Stand.stl"
] | CC0 | https://www.printables.com/model/226107 | data_0031.tar |
438638 | Sculpted Tea Light Candle Holder | <p>Sculpted Tea Light Candle Holder</p><p>I included three models:</p><ul><li>Single ornate sculpted version</li><li>Single plain version</li><li>Triple ornate sculpted version</li></ul><p><i>These are small and simple to print without any support. The single version takes less than an hour to print. I included a hole ... | [
"candle",
"candleholder",
"tealight",
"teacandle",
"tealightcandle",
"tealightholder",
"tealightcandleholder"
] | Household > Home Decor | [
"438638/images/image_1_compressed.jpg",
"438638/images/image_2_compressed.jpg"
] | [
"438638/stls/RH-TEALIGHT-SINGLE-PLAIN.stl",
"438638/stls/RH-TEALIGHT-SINGLE-SCULPTED-SMOOTH.stl",
"438638/stls/RH-TEALIGHT-SINGLE-SCULPTED.stl",
"438638/stls/RH-TEALIGHT-TRIPLE-SCULPTED.stl"
] | CC-BY | https://www.printables.com/model/438638 | data_0031.tar |
162204 | sculpture elephant a la Richard Orlinski | magnifique sculpture éléphant a la Richard Orlinski | Download free 3D printable STL models | [] | Art & Design > Sculptures | [
"162204/images/image_1_compressed.jpg",
"162204/images/image_2_compressed.jpg"
] | [
"162204/stls/figurine elephant.stl"
] | CC0 | https://www.printables.com/model/162204 | data_0031.tar |
1072271 | Sculpture of a beautiful angel | <p>angel</p> | [
"christmas",
"angel",
"sculpture",
"beautiful"
] | Seasonal designs > Winter & Christmas & New Year's | [
"1072271/images/image_1_compressed.jpg",
"1072271/images/image_2_compressed.jpg"
] | [
"1072271/stls/1.stl"
] | CC0 | https://www.printables.com/model/1072271 | data_0031.tar |
904204 | scx24 flex plates | <p>this model will lower your scx24 lower to the ground and improve the center of gravity causing less rollovers when crawling and climbing steep obstacles. i suggest you make them a little bit thicker in your slicer for better performance, they take about 1 minute on my k1 so they are very easy to install and use righ... | [
"rc",
"flexible",
"rccar",
"crawler",
"scx24"
] | Hobby & Makers > RC & Robotics | [
"904204/images/image_1_compressed.jpg"
] | [
"904204/stls/scx24 flex plates.v1.stl"
] | CC0 | https://www.printables.com/model/904204 | data_0031.tar |
569486 | Scx24 Lcg chassis | <p><strong>-Check out my new design here -</strong></p><div data-printables-embed=""><iframe width="640" height="190" src="https://www.printables.com/embed/1728279?size=wide&scale=true" scrolling="no" frameborder="0" class="printables-embed"></iframe></div><p><br>This is a work in progress scx24 chassis.</p><p>It h... | [
"rc",
"car",
"flex",
"chassis",
"thingiverse",
"crawler",
"axial",
"lcg",
"deadbolt",
"gladiator",
"scx24",
"c10",
"scx24chassis",
"suspensiontravel"
] | Hobby & Makers > RC & Robotics | [
"569486/images/image_1_compressed.jpg",
"569486/images/image_2_compressed.jpg",
"569486/images/image_3_compressed.jpg",
"569486/images/image_4_compressed.jpg",
"569486/images/image_5_compressed.jpg",
"569486/images/image_6_compressed.jpg"
] | [
"569486/stls/Battery_tray.stl",
"569486/stls/Body_mount_v1.stl",
"569486/stls/esc_mount_and_chassis_braces.stl",
"569486/stls/scx24_chassis-deadbolt-betty.stl",
"569486/stls/scx24_chassis-gladiator.stl",
"569486/stls/scx24_chassis-jlu-c10-bronco.stl"
] | CC-BY | https://www.printables.com/model/569486 | data_0031.tar |
309390 | Scylla/Charybdis adjustable tenting stand | <p><strong>Extended version with wrist pads can be found here: </strong><a href="https://github.com/Bastardkb/Charybdis/blob/main/files/mods/tenting-stand-with-wrist-pads/readme.md"><strong>Charybdis/readme.md at main · Bastardkb/Charybdis (github.com)</strong></a></p><p> </p><p>I find a standard 30-degree stand i... | [
"tenting",
"scylla",
"charybdis"
] | Gadgets > Other Gadgets | [
"309390/images/image_1_compressed.jpg",
"309390/images/image_2_compressed.jpg",
"309390/images/image_3_compressed.jpg",
"309390/images/image_4_compressed.jpg",
"309390/images/image_5_compressed.jpg",
"309390/images/image_6_compressed.jpg"
] | [
"309390/stls/arm.stl",
"309390/stls/bottom.stl",
"309390/stls/Left Case Plate Scylla.stl",
"309390/stls/plate.stl",
"309390/stls/Right Case Plate Charybdis.stl"
] | CC0 | https://www.printables.com/model/309390 | data_0031.tar |
1005123 | SD Card & micro SD Card Box | [] | Household > Office | [
"1005123/images/image_1_compressed.jpg",
"1005123/images/image_2_compressed.jpg"
] | [
"1005123/stls/Micro_SD_Card_Drawer.stl",
"1005123/stls/SD Card Box Top with opposite Holes.stl",
"1005123/stls/SD_CardBox_Single_Cover.stl",
"1005123/stls/SD_Card_Drawer.stl"
] | CC-BY | https://www.printables.com/model/1005123 | data_0031.tar | |
403415 | SD Card GRIP - Snug fit | super tight for the default SD card that came with the printer | Download free 3D printable STL models | [] | 3D Printers > Other Printer Parts & Upgrades | [
"403415/images/image_1_compressed.jpg"
] | [
"403415/stls/sdcardhandle-alternative - super tight.stl"
] | CC-BY | https://www.printables.com/model/403415 | data_0031.tar |
691122 | SD card guide for Mk3 | <p>Both PLA and PETG works. </p><p>A very quick and easy way not to ruin any more SD cards… (I have had problems with that.)</p><p>Fits with snap in on the original LCD cover.</p><p>Print it with 0.2mm layer hight.</p> | [] | 3D Printers > Prusa Parts & Upgrades | [
"691122/images/image_1_compressed.jpg"
] | [] | CC0 | https://www.printables.com/model/691122 | data_0031.tar |
66773 | SD card holder | <p>capacity of SD card holder 9 cards</p>
<h3> Print Settings</h3>
<p><strong>Printer:</strong></p>
<p>HACKER XI</p>
<p><p class="detail-setting rafts"><strong>Rafts: </strong> <div><p>No</p></div><strong>Supports:</strong></p>
<p>No</p>
<p><p class="detail-setting resolution"><strong>Resolution: </strong> <div><p>0.2<... | [
"holder",
"sdcard",
"sdcardholder",
"thingiverse"
] | Gadgets > Other Gadgets | [
"66773/images/image_1_compressed.jpg",
"66773/images/image_2_compressed.jpg",
"66773/images/image_3_compressed.jpg",
"66773/images/image_4_compressed.jpg",
"66773/images/image_5_compressed.jpg",
"66773/images/image_6_compressed.jpg",
"66773/images/image_7_compressed.jpg"
] | [
"66773/stls/SD_Bottom.stl",
"66773/stls/SD_Top.stl"
] | BSD | https://www.printables.com/model/66773 | data_0031.tar |
53023 | SD card holder 10 slot | <p>Files include STL and a print file for MK3S in PETG.<br/>
10 slots - minimal material and time. Print more of them as you need them.</p>
<p>This is a remix ,from "fns720", of much larger SD card and USB holder that required about 4+ hours to print.</p> | [
"holder",
"card",
"sd"
] | 3D Printers > Accessories | [
"53023/images/image_1_compressed.jpg"
] | [
"53023/stls/sdbox4.stl"
] | CC-BY | https://www.printables.com/model/53023 | data_0031.tar |
469140 | SD Card holder box | <p>I have seen the products of povsky and fugalster and designed mine based on them.<br>I would like to thank povsky and fugalster for sharing their great ideas.<br>The SD card holder case I designed can store 16 micro SD cards and 6 SD cards.<br>The difference from the existing designs is that it can be printed with F... | [
"sd",
"sdcard",
"microsd",
"sdcardholder"
] | Gadgets > Portable Devices | [
"469140/images/image_1_compressed.jpg",
"469140/images/image_2_compressed.jpg",
"469140/images/image_3_compressed.jpg",
"469140/images/image_4_compressed.jpg"
] | [
"469140/stls/SD_Card_holder.stl"
] | CC0 | https://www.printables.com/model/469140 | data_0031.tar |
423487 | SD Card holder for SKADIS pegboard (Mini) | <p>Simply because i didn't need space for 8 standard and 10 micro SD cards.</p><p>Prints ok without support, but perfect with support under the peg.</p> | [
"ikea",
"pegboard",
"sdcard",
"sdcardholder",
"skadis"
] | 3D Printers > Other Printer Parts & Upgrades | [
"423487/images/image_1_compressed.jpg",
"423487/images/image_2_compressed.jpg"
] | [
"423487/stls/Skådis_SDcard_holder.stl"
] | CC-BY | https://www.printables.com/model/423487 | data_0031.tar |
524831 | SD card holder w/ SIM tool (Gridfinity) | <p>This 1x1 Gridfinity bin holds 3 SD cards, 4 micro SD cards, and 3 SIM card eject pin tools. Why does anyone need 3 SIM eject tools, you ask? I don't freakin know, dude… it's just what I had in my drawer that I'm trying to declutter! You want the STL or not? hahaha</p><p>All cards are set at a 10º angle, and SIM tool... | [
"sdcard",
"microsd",
"simcard",
"gridfinity"
] | Gadgets > Photo & Video | [
"524831/images/image_1_compressed.jpg"
] | [
"524831/stls/SD cards v1.stl"
] | CC0 | https://www.printables.com/model/524831 | data_0031.tar |
901233 | SD Card Toaster | <p>I recommend printing the top and the lever with supports and brim to avoid stringy prints and warping.</p><p>(My prints were made in PETG.)</p><p>To assemble the toaster just insert the lever into the top…<img src="https://media.printables.com/media/prints/901233/rich_content/579938f2-2039-4f39-a852-128d10f2a837/img... | [] | Hobby & Makers > Organizers | [
"901233/images/image_1_compressed.jpg"
] | [
"901233/stls/Toaster bottom.stl",
"901233/stls/toaster lever.stl",
"901233/stls/toaster top.stl"
] | BSD | https://www.printables.com/model/901233 | data_0031.tar |
287057 | SD Card Wallets (Old Version) | <p>A newer version of this model is available: <a href="https://www.printables.com/model/459949-sd-wallet-mk2">SD Wallet Mk2</a></p><p> </p><p>Print in place SD Card Wallet. Four different sizes for holding: 12, 8, 6, and 4 SD-Cards.</p><p>No supports.</p><p>Inspired by SD Wallet by <a href="https://www.prin... | [
"sdcardholder"
] | Gadgets > Photo & Video | [
"287057/images/image_1_compressed.jpg",
"287057/images/image_2_compressed.jpg"
] | [
"287057/stls/1x2 SD Case v38.stl",
"287057/stls/1x3 SD Case v38.stl",
"287057/stls/2x2 SD Case v38.stl",
"287057/stls/2x3 SD Case v38.stl"
] | CC-BY | https://www.printables.com/model/287057 | data_0031.tar |
169978 | SD Gundam Base | <p>SD gundam base. I use these for my kits because its cheaper and less noticeable than the one's you can buy. I made the top 3mm pin slightly drafted. If you need a tighter fit or it to go in further use your nippers and clip a tiny bit off the top.</p>
Category: Model Robots | [
"thingiverse",
"gunpla",
"gundam",
"gunplastand",
"sdgundam"
] | Toys & Games > Action Figures & Statues | [
"169978/images/image_1_compressed.jpg"
] | [
"169978/stls/sd_base.stl",
"169978/stls/sd_gundam_base.stl"
] | CC-BY | https://www.printables.com/model/169978 | data_0031.tar |
310556 | Sd Karten Box | <p>Sd Karten Box </p> | [] | Gadgets > Computers | [
"310556/images/image_1_compressed.jpg",
"310556/images/image_2_compressed.jpg"
] | [
"310556/stls/Box-Sd-Karten.stl"
] | CC0 | https://www.printables.com/model/310556 | data_0031.tar |
275897 | SD Scraper | <p>The Micro SD Ejector is great, but I kept losing it because it's small. I Used Tinkercad (because I'm a simpleton) to add the ejector to the scraper. Printed at .12mm and 3 walls, takes 18 minutes and uses 3.79g of filament. </p> | [
"tool",
"sd",
"scraper",
"sdcard",
"microsd",
"ejector",
"bedscraper",
"bambu",
"bambulab"
] | 3D Printers > Accessories | [
"275897/images/image_1_compressed.jpg",
"275897/images/image_2_compressed.jpg",
"275897/images/image_3_compressed.jpg",
"275897/images/image_4_compressed.jpg"
] | [
"275897/stls/SD Scraper v1.stl"
] | CC0 | https://www.printables.com/model/275897 | data_0031.tar |
285012 | SD USB MicroSD Card Holder With Tray | This is a remix of Lalo_Solo＇s ＂USB SD and MicroSD holder for wide USB sticks＂ but in a smaller form factor and a little | Download free 3D printable STL models | [
"organizer",
"holder",
"sd",
"desktop",
"usb",
"organization",
"sdcard",
"microsd",
"deskorganizer",
"usbholder",
"autodeskfusion360",
"microsdholder",
"sdholder"
] | Household > Office | [
"285012/images/image_1_compressed.jpg",
"285012/images/image_2_compressed.jpg",
"285012/images/image_3_compressed.jpg"
] | [
"285012/stls/SD Card Holder v3.stl"
] | CC0 | https://www.printables.com/model/285012 | data_0031.tar |
1346696 | Sd.Kfz. 232 | <p>The sd.kfz 232, abbreviation of Sonderkraftfahrzeug 232 or special vehicle model 232, was an armored exploration car used by Germany in the 1930s and 1940s.</p><p>This model is the 8 rad version or 8 wheels, and just like the original it has all 8 wheels capable of steering in pairs of four.</p><p>To operate the ste... | [
"armoredvehicle",
"sdkfz"
] | Toys & Games > Vehicles | [
"1346696/images/image_1_compressed.jpg",
"1346696/images/image_10_compressed.jpg",
"1346696/images/image_11_compressed.jpg",
"1346696/images/image_2_compressed.jpg",
"1346696/images/image_3_compressed.jpg",
"1346696/images/image_4_compressed.jpg",
"1346696/images/image_5_compressed.jpg",
"1346696/imag... | [
"1346696/stls/232-1.stl",
"1346696/stls/232-10.stl",
"1346696/stls/232-11.stl",
"1346696/stls/232-12.stl",
"1346696/stls/232-13.stl",
"1346696/stls/232-14.stl",
"1346696/stls/232-15A.stl",
"1346696/stls/232-15B.stl",
"1346696/stls/232-16.stl",
"1346696/stls/232-17.stl",
"1346696/stls/232-18.stl"... | CC-BY | https://www.printables.com/model/1346696 | data_0031.tar |
156400 | Sd.Kfz.2 Kettenkrad | <p>Print details:</p><ul><li>Material: PLA</li><li>Recommended layer height: <strong>0.10mm</strong></li><li>Supports: yes</li><li>Infill: <strong>15%</strong></li></ul><p>[Englilsh]</p><p><a href="https://www.thingiverse.com/thing:2635032">https://www.thingiverse.com/thing:2635032</a><br>1:12_Kettenkrad model by compo... | [
"military",
"vehicle",
"scalemodel",
"constructiontoys",
"german",
"ww2",
"kettenkrad"
] | Toys & Games > Vehicles | [
"156400/images/image_1_compressed.jpg",
"156400/images/image_10_compressed.jpg",
"156400/images/image_11_compressed.jpg",
"156400/images/image_12_compressed.jpg",
"156400/images/image_13_compressed.jpg",
"156400/images/image_14_compressed.jpg",
"156400/images/image_15_compressed.jpg",
"156400/images/i... | [
"156400/stls/01_bk_front_tire.stl",
"156400/stls/01_front_wheel_axis.stl",
"156400/stls/01_front_wheel_l.stl",
"156400/stls/01_front_wheel_r.stl",
"156400/stls/01_light_body.stl",
"156400/stls/01_light_cover.stl",
"156400/stls/02_front_wheel_top_cover.stl",
"156400/stls/02_mudguard.stl",
"156400/stl... | CC-BY | https://www.printables.com/model/156400 | data_0031.tar |
711466 | SDS-Plus Drills Case | <p>I used PLA for printing. Layer height 0.3mm, 2 perimeters and 1.5mm shell thickness. Infill 5% Gyroid. My PLA prints overhangs poorly, so I speed down them to 20mm/s </p> | [
"box",
"case",
"drill",
"drills",
"sds",
"sdsplus"
] | Hobby & Makers > Tools | [
"711466/images/image_1_compressed.jpg",
"711466/images/image_2_compressed.jpg"
] | [
"711466/stls/cap_220mm.stl",
"711466/stls/sds+19.stl"
] | CC-BY | https://www.printables.com/model/711466 | data_0031.tar |
552468 | SD/MicroSD card case better MicroSD fit | <p>This is just a simple update to fix the too tight tolerances on the MicroSD part of this case.</p><p>I updated from the scad files to increase the size for the MicroSD from 11mm to 11.1mm.</p><p>I find that worked great for my varieties of microsd cards to fit just tight enough but easy to remove.</p><p>Printed in s... | [
"sd",
"micro",
"sdcard",
"microsd",
"microsdcardholder"
] | Hobby & Makers > Organizers | [
"552468/images/image_1_compressed.jpg"
] | [
"552468/stls/card_case_TOP.stl",
"552468/stls/microsdcard_5_11.1.stl",
"552468/stls/microsdcard_5_11.15.stl",
"552468/stls/microsdcard_5_11.2.stl",
"552468/stls/microsdcard_7_11.1.stl",
"552468/stls/microsdcard_7_11.15.stl",
"552468/stls/microsdcard_7_11.2.stl"
] | CC-BY | https://www.printables.com/model/552468 | data_0031.tar |
490611 | Sea Horse | <p>Sea Horse.</p><p>Split Version available: use .3mf for split laid flat on plate.</p><p>.obj split is not split just mainipulated to be more easily split. If you would like to set your own split point use this.</p> | [] | Art & Design > Sculptures | [
"490611/images/image_1_compressed.jpg"
] | [
"490611/stls/seahorse.stl",
"490611/stls/seahorsetosplit.stl"
] | CC-BY | https://www.printables.com/model/490611 | data_0031.tar |
74192 | Sea of Thieves - Sailor Cutlass | <p>I designed this in Fusion 360 and designed it to be printed without supports. The files should print properly without you having to rotate anything. When I printed it, I used a variable layer thickness for certain layers of the parts to print with higher detail and better accuracy, mostly the areas around overhands ... | [
"sword",
"bottleopener",
"seaofthieves"
] | Toys & Games > Other Toys & Games | [
"74192/images/image_1_compressed.jpg",
"74192/images/image_2_compressed.jpg"
] | [
"74192/stls/Blade 1.stl",
"74192/stls/Blade 2.stl",
"74192/stls/Blade 3.stl",
"74192/stls/Hand Guard.stl",
"74192/stls/Handle.stl"
] | CC0 | https://www.printables.com/model/74192 | data_0031.tar |
703322 | Sea Turtle | <ul><li><strong>Material:</strong> <a href="https://www.prusa3d.com/en/product/prusament-pla-lime-green-blend-970g/">Prusament PLA Blend Lime Green</a> / <a href="https://shop.filament-pm.com/www/pla-pearl-green-1-75-mm-1-kg/p153">Filament PM PLA Pearl Green</a></li><li><strong>Layerheight</strong>: 0.1mm </li><li... | [
"toy",
"decoration",
"scan",
"small",
"animal",
"decor",
"cute",
"sculpt",
"sea",
"garden",
"turtle",
"sculptures",
"scanned",
"seaturtle"
] | Art & Design > Sculptures | [
"703322/images/image_1_compressed.jpg",
"703322/images/image_2_compressed.jpg"
] | [
"703322/stls/sea_turtle.stl"
] | CC-BY | https://www.printables.com/model/703322 | data_0031.tar |
70303 | Seal | <figure class="media"><oembed url="https://www.youtube.com/watch?v=QV6knzAPloA"></oembed></figure><p>Version one is designed for single filament printers.</p><p>Version two (MMU) is designed for multi material printers.</p><p> </p><p>Help support my design work by visiting my referral links:</p><p>Upland referral ... | [
"animal",
"dnd",
"dungeons",
"dungeonsanddragons",
"seal",
"rpg",
"animals",
"dungeon",
"dndtiles",
"rpgtiles",
"dndminiature",
"meshmixer",
"tabletoprpg",
"dungeontiles",
"dndprops",
"dungeonsdragons",
"dungeondnd",
"dndmini",
"dndprop",
"asllexicon",
"olsen",
"starlabs3d"... | World & Scans > Animals | [
"70303/images/image_1_compressed.jpg",
"70303/images/image_2_compressed.jpg",
"70303/images/image_3_compressed.jpg",
"70303/images/image_4_compressed.jpg",
"70303/images/image_5_compressed.jpg",
"70303/images/image_6_compressed.jpg",
"70303/images/image_7_compressed.jpg"
] | [
"70303/stls/Seal -Version 1.stl",
"70303/stls/Seal -Version 2 -MMU -1 Body.stl",
"70303/stls/Seal -Version 2 -MMU -2 Eyes Nose.stl"
] | CC-BY | https://www.printables.com/model/70303 | data_0031.tar |
123058 | Sealant Cartridge Nozzle Cap Remix | <p>Remix der Verschlusskappe für Silikon Kartuschen.</p><p>Geändert habe ich die Aussenform, welche nun ohne Raft oder Support gedruckt werden kann.<br>Außerdem habe ich den Gewindeansatz konisch gestaltet, da meine Kartuschen am Auslass alle konisch zulaufen.</p><p>Als O-Ringe haben sich die O-Ring Dichtungen TOOGOO(R... | [
"cap",
"silicone",
"thingiverse",
"silikon",
"verschlusskappe",
"sealantcap",
"silikonspritze"
] | Hobby & Makers > Other Ideas | [
"123058/images/image_1_compressed.jpg",
"123058/images/image_2_compressed.jpg",
"123058/images/image_3_compressed.jpg",
"123058/images/image_4_compressed.jpg",
"123058/images/image_5_compressed.jpg",
"123058/images/image_6_compressed.jpg"
] | [
"123058/stls/Silikon_Kappe_5.stl",
"123058/stls/Silikon_Kappe_verlängert.stl"
] | CC-BY | https://www.printables.com/model/123058 | data_0031.tar |
346617 | Sealant Grout Filler Scraper/Removal Tool | <p>Sealant Grout Filler Scraper/Removal Tool</p><p>A tool based on a similar commercially available sealant removal tool.</p><p>It can help remove or scrap away silicon rubber sealant, caulk, grout and other fillers.</p><p>Especially for silicon, you should run a blade/knife along first. </p><p>It’s by no means 10... | [
"scraper",
"silicone",
"filler",
"silicon",
"sealant",
"removaltool"
] | Hobby & Makers > Tools | [
"346617/images/image_1_compressed.jpg",
"346617/images/image_2_compressed.jpg",
"346617/images/image_3_compressed.jpg",
"346617/images/image_4_compressed.jpg"
] | [
"346617/stls/Sealant Scraper.stl"
] | CC-BY | https://www.printables.com/model/346617 | data_0031.tar |
103242 | Sealant Gun Nozzles |
<p>Sometimes in the work you have to apply glue or sealant in a certain way and these devices should help to solve the problem.</p>
<p>These nozzle spouts are removable and are consumable. You don't need a lot of time and material to print them. But that the glue does not dry in the Neck, close it with a Cap.</p>
<p>N... | [
"gun",
"glue",
"sealer",
"silicone",
"adhesive",
"thingiverse",
"sausage",
"appliance",
"sealant",
"caulking",
"appli",
"application",
"mastic",
"smear"
] | Hobby & Makers > Tools | [
"103242/images/image_1_compressed.jpg",
"103242/images/image_10_compressed.jpg",
"103242/images/image_11_compressed.jpg",
"103242/images/image_12_compressed.jpg",
"103242/images/image_13_compressed.jpg",
"103242/images/image_14_compressed.jpg",
"103242/images/image_15_compressed.jpg",
"103242/images/i... | [
"103242/stls/Corner_gap_0.6_combed.stl",
"103242/stls/Corner_gap_10.stl",
"103242/stls/Cup.stl",
"103242/stls/Neck.stl",
"103242/stls/Nozzle1.5mm45trim.stl",
"103242/stls/Nozzle1mm45trim.stl",
"103242/stls/Nozzle1mm_round.stl",
"103242/stls/Nozzle_combed_20mm.stl",
"103242/stls/Nozzle_Corner_gap_0.6... | CC-BY | https://www.printables.com/model/103242 | data_0031.tar |
331292 | Sealed Gift Card Box | Print it and pause it just before it closes and put a gift card or money inside | Download free 3D printable STL models | [
"money",
"gift"
] | Seasonal designs > Winter & Christmas & New Year's | [
"331292/images/image_1_compressed.jpg"
] | [
"331292/stls/gift card box v1.stl"
] | CC-BY | https://www.printables.com/model/331292 | data_0031.tar |
1452304 | Sealing ring for AD5X Dry Boxes from Flashforge | <p>Sealing ring for AD5X Dry Boxes from Flashforge.</p> | [
"drybox",
"flashforge",
"ad5x"
] | 3D Printers > Other Printer Parts & Upgrades | [
"1452304/images/image_1_compressed.jpg"
] | [
"1452304/stls/sealing.stl"
] | CC0 | https://www.printables.com/model/1452304 | data_0031.tar |
250558 | Seasoning/Gravy Packet Holder Lite | <p>I finally got tired of my seasoning packets going all over the place in my cupboard so I decided to print a holder for them. All of the existing designs I could find online were either total overkill to hold some packets or used way too much plastic/time to print (or both). So I decided to make my own “lite” holder ... | [
"cooking",
"organizer",
"holder",
"kitchenorganizer",
"efficient",
"lite",
"seasoning"
] | Household > Kitchen | [
"250558/images/image_1_compressed.jpg",
"250558/images/image_2_compressed.jpg",
"250558/images/image_3_compressed.jpg"
] | [
"250558/stls/Seasoning-Packet-Holder-Lite.stl"
] | CC0 | https://www.printables.com/model/250558 | data_0031.tar |
1485057 | Seat belt buckle guide | This guide keeps your seatbelt buckle securely in place, making it easy for children to buckle up independently. | Download free 3D printable STL models | [] | Household > Garage | [
"1485057/images/image_1_compressed.jpg",
"1485057/images/image_2_compressed.jpg",
"1485057/images/image_3_compressed.jpg"
] | [
"1485057/stls/seatbelt guide.stl"
] | CC-BY | https://www.printables.com/model/1485057 | data_0031.tar |
78714 | Seat Belt Button - Buckle Stop | <p>[Update Nov.23, 2021 : I came up with a variation on the original design; this second version works betters on some seatbelts. See the additional files with “06” in the name.]</p><p> </p><p>You can mail order one of these for $1 and wait a week or three, or just print this one in 15 minutes for 5 cents.</... | [] | Hobby & Makers > Automotive | [
"78714/images/image_1_compressed.jpg",
"78714/images/image_2_compressed.jpg",
"78714/images/image_3_compressed.jpg",
"78714/images/image_4_compressed.jpg",
"78714/images/image_5_compressed.jpg"
] | [
"78714/stls/SeatBelt02 - Bottom.stl",
"78714/stls/SeatBelt02 - ButtonAll.stl",
"78714/stls/SeatBelt02 - Pin.stl",
"78714/stls/SeatBelt02 - Pin2.stl",
"78714/stls/SeatBelt02 - Top.stl",
"78714/stls/SeatBelt06 - All.stl",
"78714/stls/SeatBelt06 - Bottom.stl",
"78714/stls/SeatBelt06 - Pin.stl",
"78714/... | CC0 | https://www.printables.com/model/78714 | data_0031.tar |
296895 | Seat Belt Clip |
<p>Seat belt clip to allow you to stick into an empty seat belt holder. This is intended to be used if your Air Bag light keeps tripping (on/off) because you have a heavy load in your car or a pet.</p>
<p>Tested and fitted in 2016 Mazda CX5, works like a charm but probably works in 80% of vehicles.</p>
<p>You should... | [
"seat",
"thingiverse",
"mazda",
"seatbelt",
"seatbeltplug",
"seatbeltclip",
"mazdacx5",
"seatbeltbutton"
] | Hobby & Makers > Automotive | [
"296895/images/image_1_compressed.jpg",
"296895/images/image_2_compressed.jpg"
] | [
"296895/stls/Mazda_Seat_Belt_Clip.stl"
] | GPL2.0 | https://www.printables.com/model/296895 | data_0031.tar |
257069 | Seat FR keychain | <p>Here's a Seat FR keychain I designed for a friend.</p><p><br>Dimensions: 48.61×31.55×4mm</p><p> </p><p>Printed example with .2mm layer and a .4mm nozzle using AmazonBasics PLA Dark Grey/Red and Polymaker PolyTerra Charcoal Black and ironing enabled.</p><p> </p><p><code>KO#4</code></p> | [
"car",
"seat",
"keychain",
"keyring",
"seatkeychain",
"seatfr",
"seatfrkeychain",
"seatfrkeyring",
"seatkeyring"
] | Art & Design > 2D Plates & Logos | [
"257069/images/image_1_compressed.jpg",
"257069/images/image_2_compressed.jpg"
] | [
"257069/stls/seat_fr_keyring.stl"
] | CC-BY | https://www.printables.com/model/257069 | data_0031.tar |
356523 | Seat VW Wheel Nut Cap Remover Tool | <p>The tool deliverd with my Seat Alhambra was crap. Therefore I designed my own, which works lika a charm.</p>
Category: Hand Tools | [
"tool",
"car",
"tire",
"tirecap"
] | Hobby & Makers > Tools | [
"356523/images/image_1_compressed.jpg",
"356523/images/image_2_compressed.jpg"
] | [
"356523/stls/RadMutterKappenAbziehHilfe.stl"
] | CC-BY | https://www.printables.com/model/356523 | data_0031.tar |
725875 | Seatbelt Adapter BMW e92 | [] | Hobby & Makers > Automotive | [
"725875/images/image_1_compressed.jpg",
"725875/images/image_2_compressed.jpg",
"725875/images/image_3_compressed.jpg",
"725875/images/image_4_compressed.jpg",
"725875/images/image_5_compressed.jpg"
] | [
"725875/stls/seatbelt adapter e92 coupe.stl"
] | BSD | https://www.printables.com/model/725875 | data_0031.tar | |
72843 | Seatbelt Child Lock | <p>It's really frustrating and stressful when a kid unlocks the seatbelt while driving. Reaching to the back seat can be impossible and dangerous. This little thing secures the seatbelt from unlocking by those little hands. At the same time adult can open it quickly.</p> | [
"children",
"car",
"lock",
"block",
"child",
"childsafety",
"seatbelt"
] | Hobby & Makers > Automotive | [
"72843/images/image_1_compressed.jpg"
] | [
"72843/stls/seatbelt child lock mini v3.stl"
] | CC-BY | https://www.printables.com/model/72843 | data_0031.tar |
465390 | Seatbelt stop button | <p>Seatbelt stop button. Printed in carbon fiber reinforced nylon. Use 1,75mm filament to hold everything tightly together. Plastic weld the ends with a soldering iron.</p> | [
"button",
"seatbelt"
] | Hobby & Makers > Automotive | [
"465390/images/image_1_compressed.jpg"
] | [
"465390/stls/Seatbelt stop button.stl"
] | CC0 | https://www.printables.com/model/465390 | data_0031.tar |
925087 | Seatbelt Warning Light KeyChain | <p>keychain for your needs. Cut Down if need be.</p><ul><li>4mm base and 0.8 color change (0.2 layers = 4 layers)</li><li>37mm x 29mm</li><li>6mm Keyring hole</li></ul> | [
"car",
"truck",
"toyota",
"ford",
"gmc",
"chevy",
"vehicle",
"dodge"
] | Art & Design > Other Art & Designs | [
"925087/images/image_1_compressed.jpg",
"925087/images/image_2_compressed.jpg"
] | [
"925087/stls/3.stl"
] | CC-BY | https://www.printables.com/model/925087 | data_0031.tar |
1146688 | Seated Unicorn | <p>Minimal supports needed, if at all. Looks like candy when printed in glitter filaments. Scalable & Easy!</p><figure class="image image_resized" style="width:78.53%;"><img src="https://media.printables.com/media/prints/1146688/rich_content/714cd64a-9041-43e1-910e-c71cec361470/2025-01-12-204015.jpg#%7B%22uuid%22%3... | [
"sitting",
"mini",
"animal",
"fantasy",
"creature",
"miniature",
"rpg",
"horse",
"horn",
"unicorn",
"seated",
"sleeping",
"unicorns",
"mystical"
] | Art & Design > Sculptures | [
"1146688/images/image_1_compressed.jpg",
"1146688/images/image_2_compressed.jpg",
"1146688/images/image_3_compressed.jpg",
"1146688/images/image_4_compressed.jpg"
] | [
"1146688/stls/seated unicorn stl.stl"
] | CC0 | https://www.printables.com/model/1146688 | data_0031.tar |
866197 | seatpost mount bike storage tool box | <p>Self remix update 2025/04/24</p><p><a target="_blank" rel="noopener noreferrer nofollow" class="editor-link" href="https://www.printables.com/model/1274183-seatpost-mount-bike-storage-tool-box-easy-edit">https://www.printables.com/model/1274183-seatpost-mount-bike-storage-tool-box-easy-edit</a></p><p> </p><p>He... | [
"box",
"storagebox",
"toolbox",
"bike",
"toolstorage",
"gopromount"
] | Sports & Outdoor > Outdoor Sports | [
"866197/images/image_1_compressed.jpg",
"866197/images/image_2_compressed.jpg",
"866197/images/image_3_compressed.jpg",
"866197/images/image_4_compressed.jpg",
"866197/images/image_5_compressed.jpg",
"866197/images/image_6_compressed.jpg",
"866197/images/image_7_compressed.jpg",
"866197/images/image_8... | [
"866197/stls/Allez Sprint_Not tested.stl",
"866197/stls/body_v2.1_t1.6.stl",
"866197/stls/cable tie_gopro mount.stl",
"866197/stls/gopro_mount_27.2.stl",
"866197/stls/gopro_mount_30.9.stl",
"866197/stls/gopro_mount_31.8.stl",
"866197/stls/latch_A.stl",
"866197/stls/latch_B.stl",
"866197/stls/lid_v2.... | CC-BY | https://www.printables.com/model/866197 | data_0031.tar |
294761 | Seattle Seahawks Logo | <p>There are already several Seahawks logo models on the internet, but I wasn't happy with the quality of them. The smooth curves always had straight segments which ruin the look, especially when scaled large.</p><p>So, I made my own version from scratch. The model will look fine printed in a single color, but it reall... | [
"logo",
"mmu",
"multicolor",
"football",
"nfl",
"superbowl",
"seattle",
"seahawks"
] | Art & Design > 2D Plates & Logos | [
"294761/images/image_1_compressed.jpg",
"294761/images/image_2_compressed.jpg"
] | [
"294761/stls/Seahawks Logo.stl"
] | CC0 | https://www.printables.com/model/294761 | data_0031.tar |
111078 | Seattle Seahawks Logo Stand | This is a Logo Stand form the NFL Team Seattle Seahawks. | Download free 3D printable STL models | [
"football",
"nfl",
"seattle",
"seahawks",
"americanfootball"
] | Sports & Outdoor > Outdoor Sports | [
"111078/images/image_1_compressed.jpg"
] | [
"111078/stls/Seahawks Logo Stand.stl",
"111078/stls/Seahawks Logo Top.stl",
"111078/stls/seahawks-v2.stl"
] | LGPL | https://www.printables.com/model/111078 | data_0031.tar |
766566 | Second spool holder for original prusa enclosure | <p>=== Update === </p><p>Uploaded a mirrored version plus spool holder rod for a third spool in the enclosure. Perfect for drying filament while printing other stuff. </p><p>=== Update ===</p><p> </p><p>Second spool holder for original prusa enclosure. </p><p>Ideal for manual 2-Color prints as the o... | [
"prusa",
"enclosure",
"spoolholder",
"spoolmount",
"2color",
"enclosuremodification",
"secondary"
] | 3D Printers > Prusa Parts & Upgrades | [
"766566/images/image_1_compressed.jpg",
"766566/images/image_2_compressed.jpg",
"766566/images/image_3_compressed.jpg",
"766566/images/image_4_compressed.jpg",
"766566/images/image_5_compressed.jpg",
"766566/images/image_6_compressed.jpg",
"766566/images/image_7_compressed.jpg"
] | [
"766566/stls/2nd_SPOOL_HOLDER.stl",
"766566/stls/3rd_SPOOL_HOLDER.stl",
"766566/stls/3rd_SPOOL_HOLDER_ROD.stl"
] | GPL3.0 | https://www.printables.com/model/766566 | data_0031.tar |
441063 | Secret Box | <p>I loved these puzzle boxes as a kid. The correct way to open the box is to apply force on the corner and push the top diagonally.</p><p>v2 - top was too loose.</p> | [
"box",
"game",
"dice",
"dicebox"
] | Tabletop Miniatures > Miniature Gaming Accessories | [
"441063/images/image_1_compressed.jpg"
] | [
"441063/stls/Secret box.stl"
] | CC-BY | https://www.printables.com/model/441063 | data_0031.tar |
1143089 | Secrid credit card euro coins holder | <p>Credit card size euro coins holder for Secrid wallet</p> | [
"creditcard",
"coinstorage",
"coinsholder",
"coinsorganizer",
"secrid"
] | Hobby & Makers > Organizers | [
"1143089/images/image_1_compressed.jpg",
"1143089/images/image_2_compressed.jpg",
"1143089/images/image_3_compressed.jpg",
"1143089/images/image_4_compressed.jpg"
] | [
"1143089/stls/coins desc.stl",
"1143089/stls/coins v2 clear.stl",
"1143089/stls/coins v2.stl",
"1143089/stls/euro coins clear.stl"
] | CC-BY | https://www.printables.com/model/1143089 | data_0031.tar |
392012 | Secure Grip Guitar Pick | <p>I printed this in Red ABS for gifts to my senior friends who are always dropping their picks. Ha. It will stand on the bedplate on its back end and print well. I then hung it in a jar for a while with Acetone until shiny and smooth. It self-orients in your hand and will not normally come out ... | [
"guitar",
"pick"
] | Hobby & Makers > Music | [
"392012/images/image_1_compressed.jpg"
] | [
"392012/stls/Pick-IIII.stl"
] | CC0 | https://www.printables.com/model/392012 | data_0031.tar |
363685 | Secure HSW Controller Mount | <p>Holds your controllers reliably and securely. Can print the all-in-one “One Piece” model or print the mount and HSW insert parts separately (and glue them together).</p><p>It doesn't look pretty, but good luck knocking a controller off accidentally.</p><p>Designed with Onshape: https://cad.onshape.com/documents/0126... | [
"controllermount"
] | Hobby & Makers > Organizers | [
"363685/images/image_1_compressed.jpg",
"363685/images/image_2_compressed.jpg"
] | [
"363685/stls/Controller Holder v3 - Insert Attachment.stl",
"363685/stls/Controller Holder v3 - Mount.stl",
"363685/stls/Controller Holder v3 - One Piece.stl"
] | CC-BY | https://www.printables.com/model/363685 | data_0031.tar |
1124941 | Secure XL Nextruder Cable Connector Solution | <p>If your extruder keeps stopping mid print and seems to magically start again after docked, most likely the cable is coming loose. Over time, the cable connector will slowly back out of the <strong>dwarf-cover-base </strong>and put strain on the white plug connected to the dwarf board. </p><p>This modification w... | [
"extruder",
"motor",
"xl",
"nextruder",
"stopping"
] | 3D Printers > Prusa Parts & Upgrades | [
"1124941/images/image_1_compressed.jpg",
"1124941/images/image_2_compressed.jpg",
"1124941/images/image_3_compressed.jpg",
"1124941/images/image_4_compressed.jpg",
"1124941/images/image_5_compressed.jpg",
"1124941/images/image_6_compressed.jpg",
"1124941/images/image_7_compressed.jpg"
] | [
"1124941/stls/dwarf-cover-base-cover-conn-secured.stl",
"1124941/stls/dwarf-cover-connector-secure.stl"
] | GPL2.0 | https://www.printables.com/model/1124941 | data_0031.tar |
968076 | Secure Your Caravan Windows with Child Safety Lock! | <p>Hello everyone,</p><p> </p><p>I’ve designed a handy child safety lock for caravan windows and wanted to share it with you. This lock is specifically designed to prevent children from opening the windows on the bunk bed, ensuring extra peace of mind during your travels.</p><p> </p><p><strong>Why Choose Our ... | [
"lock",
"caravan",
"childlock"
] | Hobby & Makers > Automotive | [
"968076/images/image_1_compressed.jpg"
] | [
"968076/stls/Caravan window lock v3.stl"
] | CC0 | https://www.printables.com/model/968076 | data_0031.tar |
522258 | Seed Dibber | <p>Wanted a seed dibbler with built-in markings and didn't see one that fit my needs so threw this one together. Designed to fit most sized hands comfortably.</p>
<h3>Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Creality</p>
<p class="detail-setting printer"><strong>Printer: </strong>
<div><p>Ender 3 P... | [
"plant",
"garden",
"seed",
"soil",
"dibbler",
"dibber"
] | Household > Outdoor & Garden | [
"522258/images/image_1_compressed.jpg",
"522258/images/image_2_compressed.jpg"
] | [
"522258/stls/Seed_Dibber.stl"
] | CC-BY | https://www.printables.com/model/522258 | data_0031.tar |
55936 | Seed Dryer | <p>This has been designed as a modular seed dryer enabling you to print and stack as many layers as you require. (Two lengths of the dovetail are included one for a stack of 5 the other for a stack of 10) The idea is there is a fan housed in the bottom that pushes a gentle stream of air through the stack to expedite th... | [
"plant",
"garden",
"seed",
"growing",
"gardening",
"plants",
"seedling",
"thingiverse",
"seeds",
"seedlings",
"horticulture",
"seeddryer"
] | Household > Outdoor & Garden | [
"55936/images/image_1_compressed.jpg",
"55936/images/image_10_compressed.jpg",
"55936/images/image_11_compressed.jpg",
"55936/images/image_12_compressed.jpg",
"55936/images/image_13_compressed.jpg",
"55936/images/image_14_compressed.jpg",
"55936/images/image_15_compressed.jpg",
"55936/images/image_16_... | [
"55936/stls/seed_dryer.stl",
"55936/stls/seed_dryer_base.stl",
"55936/stls/seed_dryer_base_theaded_insert.stl",
"55936/stls/seed_dryer_dovetail_10_drawer.stl",
"55936/stls/seed_dryer_dovetail_5_drawer.stl",
"55936/stls/seed_dryer_drawer.stl",
"55936/stls/seed_dryer_drawer_modifier.stl",
"55936/stls/se... | CC-BY | https://www.printables.com/model/55936 | data_0031.tar |
223610 | Seed packet holder | <p>Print layer and infill does not matter. Basic shape. Use typical draft settings.</p><p> </p> | [
"holder",
"seed"
] | Household > Outdoor & Garden | [
"223610/images/image_1_compressed.jpg"
] | [
"223610/stls/SeedPacketHolder.stl"
] | CC0 | https://www.printables.com/model/223610 | data_0031.tar |
113172 | Seed packet holder - vase mode - 40 grams |
<p>I was looking at seed boxes here, and they all were heavy to do the job. Vase mode to the rescue. OpenScad, sinusoid functions and this resulted in a very light part and satisfying print.<br/>
The goal was to make compartments that can hold large seeds like lima beans.</p>
<p>I printed mine with 0.6 nozzle, but yo... | [
"organizer",
"vasemode",
"gardening",
"thingiverse",
"seeds",
"frijolessaltarines"
] | Household > Other House Equipment | [
"113172/images/image_1_compressed.jpg",
"113172/images/image_2_compressed.jpg"
] | [
"113172/stls/SeedPacketsVaseMode2BottomPlus.stl"
] | CC-BY | https://www.printables.com/model/113172 | data_0031.tar |
62341 | Seed Starter Reusable Print-in-Place Pot remix | <p>Sean K's design with print in place hinges didn't work well when printing in PETG, and .15 layers increased print time. My changes cut the time to print by 50% and the raw materials used by 40%.</p><ul><li>Hinge is a single layer of plastic that will bend when printed with .3 layers.</li><li>Reduced the thickness of... | [] | Household > Outdoor & Garden | [
"62341/images/image_1_compressed.jpg",
"62341/images/image_2_compressed.jpg"
] | [
"62341/stls/assembly-x1v2.stl",
"62341/stls/Cap.stl"
] | CC-BY | https://www.printables.com/model/62341 | data_0031.tar |
61837 | Seed Starter System - Reusable & Print-in-Place | <p>I made this model because my partner loves gardening, and hates single use plastics. It drove me crazy that one of the easiest ways to start seeds is in those awful thin plastic cups that pretty much get destroyed after one use. This starter is easily printable, and because the sides are hinged, when a seedling is r... | [
"plant",
"garden",
"easytoprint",
"seed",
"printinplace",
"gardening",
"plants",
"reusable",
"easyprint",
"seeds",
"planting",
"seedlings",
"seeder",
"seedstarter",
"seeding"
] | Household > Outdoor & Garden | [
"61837/images/image_1_compressed.jpg",
"61837/images/image_10_compressed.jpg",
"61837/images/image_11_compressed.jpg",
"61837/images/image_12_compressed.jpg",
"61837/images/image_13_compressed.jpg",
"61837/images/image_14_compressed.jpg",
"61837/images/image_15_compressed.jpg",
"61837/images/image_16_... | [
"61837/stls/Assembly - X1.stl",
"61837/stls/Hole Maker.stl",
"61837/stls/Seed Starter.stl",
"61837/stls/Tray.stl",
"61837/stls/TrayModular - X2.stl",
"61837/stls/TrayModular.stl"
] | CC-BY | https://www.printables.com/model/61837 | data_0031.tar |
37089 | Seedling Flower Pot | <p>I made this thing for a seedling. It has the perfect size for one coconut pellet.</p>
<p><strong>Flower pot lids</strong></p>
<ul>
<li><a href="https://www.printables.com/model/37090-seedling-flower-pot-shuttle-lid">Seedling Flower Pot Shuttle Lid</a></li>
<li><a href="https://www.printables.com/model/37091-seedling... | [
"pot",
"plant",
"flower",
"liner",
"seed",
"seedling",
"thingiverse",
"pellets",
"pellet"
] | Household > Outdoor & Garden | [
"37089/images/image_1_compressed.jpg",
"37089/images/image_2_compressed.jpg",
"37089/images/image_3_compressed.jpg",
"37089/images/image_4_compressed.jpg"
] | [
"37089/stls/Flower Pot Inlay.stl",
"37089/stls/flower-pot-simple_.stl",
"37089/stls/flower-pot_staircase.stl"
] | CC-BY | https://www.printables.com/model/37089 | data_0031.tar |
235200 | Seedling Shells | <p><strong>Benefits</strong></p><ul><li>Deep, consistent root growth</li><li>The ribbed sides and taper encourage downward and perpendicular root structure instead of balling or clumping.</li><li>An open bottom air-prunes roots to further avoid balling or clumping.</li><li>Separating shell-halves allow full access to s... | [
"garden",
"gardening",
"seedling"
] | Household > Outdoor & Garden | [
"235200/images/image_1_compressed.jpg",
"235200/images/image_2_compressed.jpg",
"235200/images/image_3_compressed.jpg",
"235200/images/image_4_compressed.jpg",
"235200/images/image_5_compressed.jpg"
] | [
"235200/stls/Seedling Shell - Tray.stl",
"235200/stls/Seedling Shell.stl"
] | CC0 | https://www.printables.com/model/235200 | data_0031.tar |
152595 | Seedling starter cups | <h3><strong>Print Settings</strong></h3><p><strong>Rafts: </strong>No</p><p><strong>Supports: </strong>No</p><p><strong>Resolution: </strong>.2</p><p><strong>Walls/Shells: </strong>3</p><p><strong>Infill: </strong>10-15%</p><p><strong>Filament:</strong> PLA</p><p>Designed using FreeCAD</p><p><strong>Seedling Starter Cu... | [
"pot",
"plant",
"planter",
"seed",
"plants",
"seedling",
"planting",
"flowerplanter"
] | Household > Outdoor & Garden | [
"152595/images/image_1_compressed.jpg"
] | [
"152595/stls/Seedling Starter Mold - Base.stl",
"152595/stls/Seedling Starter Mold.stl"
] | CC-BY | https://www.printables.com/model/152595 | data_0031.tar |
71854 | Seed/Module/Cell Tray MK2 (Seed/Plug Tray) | <p>This 6 cell module tray for starting your seeds, designed to be strong and sturdy so that i can be reused many times, with a large hole in the base to aid drainage and the easy removal of plug (plant) once the plant is ready for transplant. They also nestle together nicely for storage when not in use.</p><p>MK2 vers... | [
"planter",
"garden",
"gardening",
"plants",
"seedling",
"thingiverse",
"seeds",
"seedlings",
"seedstarter",
"growyourown",
"growyourownfood",
"homegrowing"
] | Household > Outdoor & Garden | [
"71854/images/image_1_compressed.jpg",
"71854/images/image_10_compressed.jpg",
"71854/images/image_11_compressed.jpg",
"71854/images/image_12_compressed.jpg",
"71854/images/image_13_compressed.jpg",
"71854/images/image_2_compressed.jpg",
"71854/images/image_3_compressed.jpg",
"71854/images/image_4_com... | [
"71854/stls/6 Cell Dibbler Plate.stl",
"71854/stls/6_cell_seed_tray_mk2-wide-shalow.stl",
"71854/stls/6_cell_seed_tray_mk2.stl",
"71854/stls/6_cell_seed_tray_mk2_shallow.stl",
"71854/stls/6_cell_seed_tray_MK2_wide.stl",
"71854/stls/9 cell seed tray mk2 v3.stl",
"71854/stls/Module_Dibber.stl"
] | CC-BY | https://www.printables.com/model/71854 | data_0031.tar |
664858 | Seeed Studio XIAO-ESP32-S3 Case | <p>This is a simple case for the Seeed Studio XIAO-ESP32-S3. It has an option with an extra plank that you can stick the external antenna onto. The lid snaps on without any screws or glue. </p><p>This is an initial model for basically the device itself. I'll create some more once I get further into some projects I... | [
"arduino",
"esp32",
"seeed",
"seeedstudio",
"xiao",
"esp32s3"
] | Hobby & Makers > Electronics | [
"664858/images/image_1_compressed.jpg",
"664858/images/image_2_compressed.jpg",
"664858/images/image_3_compressed.jpg"
] | [
"664858/stls/XIAO-ESP32-S3 Antenna Base.stl",
"664858/stls/XIAO-ESP32-S3 Base.stl",
"664858/stls/XIAO-ESP32-S3 Lid.stl"
] | CC-BY | https://www.printables.com/model/664858 | data_0031.tar |
1565089 | Seeed Wio Tracker L1 E-ink case 3000mAh Meshtastic | <p>Modified the great case designed by zeropt to fit a 3000mAh Makerfocus battery (65x35x10mm).</p><p>A M3x14mm screw is needed.</p><p>I had no Onshape experience and I needed some time to figure it out and to appreciate the great design of zeropt.</p><p></p> | [
"case",
"battery",
"eink",
"meshtastic"
] | Gadgets > Portable Devices | [
"1565089/images/image_1_compressed.jpg",
"1565089/images/image_2_compressed.jpg",
"1565089/images/image_3_compressed.jpg",
"1565089/images/image_4_compressed.jpg"
] | [
"1565089/stls/3000mAh V1 - Back.stl",
"1565089/stls/3000mAh V3 - Front without logo.stl",
"1565089/stls/3000mAh V3 - Front.stl",
"1565089/stls/L1 Wio Tracker eink case 3000mAh.stl",
"1565089/stls/wio-tracker-l1-eink-case-v1_3-button.stl",
"1565089/stls/wio-tracker-l1-eink-case-v1_3-joystick.stl"
] | CC-BY | https://www.printables.com/model/1565089 | data_0031.tar |
1420534 | Seeed Wio Tracker L1 E-ink Enclosure | <p>This is a custom case for the <a href="https://www.seeedstudio.com/Wio-Tracker-L1-E-ink-p-6456.html">Wio Tracker L1 E-ink kit from Seeedstudio</a>. The e-ink display that comes with the board is somewhat large but I tried to get the enclosure as pocket-able as possible.</p><p>I uploaded two versions of the front wit... | [
"communicator",
"tracker",
"eink",
"mesh",
"seeed",
"seeedstudio",
"lora",
"l1",
"meshtastic",
"wio"
] | Hobby & Makers > Electronics | [
"1420534/images/image_1_compressed.jpg",
"1420534/images/image_2_compressed.jpg",
"1420534/images/image_3_compressed.jpg",
"1420534/images/image_4_compressed.jpg",
"1420534/images/image_5_compressed.jpg"
] | [
"1420534/stls/Wio Tracker L1 Eink Case v1_3 - Back.stl",
"1420534/stls/Wio Tracker L1 Eink Case v1_3 - Button.stl",
"1420534/stls/Wio Tracker L1 Eink Case v1_3 - Front with Speaker Holes.stl",
"1420534/stls/Wio Tracker L1 Eink Case v1_3 - Front.stl",
"1420534/stls/Wio Tracker L1 Eink Case v1_3 - Joystick.st... | CC-BY | https://www.printables.com/model/1420534 | data_0031.tar |
127385 | Sega Game Gear Display Stand | <h3>Notes</h3><p>Fits my display stand for the Atari Lynx II in height and vertical angle.</p> | [
"display",
"stand",
"retro",
"console",
"handheld",
"sega",
"gamegear"
] | Gadgets > Video Games | [
"127385/images/image_1_compressed.jpg"
] | [
"127385/stls/ggstand.stl"
] | CC-BY | https://www.printables.com/model/127385 | data_0031.tar |
1853 | Segmented Chameleon Keychain | <p>This is a segmented chameleon keychain, created from an svg file found at flaticons.com. Icon made by Freepik from www.flaticon.com. The gaps turned out a bit too big for my taste. I may go back and make them smaller and add more segments.</p>
| [] | World & Scans > Animals | [
"1853/images/image_1_compressed.jpg"
] | [
"1853/stls/chameleo_keychain-v8.stl"
] | CC0 | https://www.printables.com/model/1853 | data_0031.tar |
343681 | Segmented Dice Tower v3 | <h3>General</h3><p>Don't forget to check out the other models:</p><ul><li><a href="https://www.printables.com/model/332823">Version #1</a></li><li><a href="https://www.printables.com/model/332825">Version #2</a></li><li>Version #3 (this model)</li></ul><h3>Prolog</h3><p>This dice tower was inspired primarily by my work... | [
"dnd",
"fusion360",
"tower",
"castle",
"dungeonsanddragons",
"dicetower",
"dice",
"madewithfusion360",
"nosupportsneeded",
"segmented",
"castledicetower",
"battlement",
"sireinsectus"
] | Tabletop Miniatures > Miniature Gaming Accessories | [
"343681/images/image_1_compressed.jpg",
"343681/images/image_2_compressed.jpg",
"343681/images/image_3_compressed.jpg",
"343681/images/image_4_compressed.jpg"
] | [
"343681/stls/Battlement.stl",
"343681/stls/Castle Dice Tower.stl",
"343681/stls/Tower Base.stl",
"343681/stls/Tower Middle.stl"
] | CC-BY | https://www.printables.com/model/343681 | data_0031.tar |
761908 | Segmented needle container | <p>Container for leatherworking harness needles. Made to fit needles that are up to 2 5/16" (59mm) in length. Lid screws on with a ¾-10 UNC thread, so if there are issues printing, the threads can be cleaned up with a standard tap.</p> | [
"container",
"sewing",
"needle",
"leatherworking"
] | Hobby & Makers > Organizers | [
"761908/images/image_1_compressed.jpg",
"761908/images/image_2_compressed.jpg"
] | [
"761908/stls/Needle container segmented body v8.stl",
"761908/stls/Needle container segmented cap v8.stl"
] | GPL3.0 | https://www.printables.com/model/761908 | data_0031.tar |
899359 | Segmenter R5 MMU | <p>Jemně po-upravený model, předělán pro MMU dvoubarevný tisk, pro snažší přečtení,</p><p>z duvodu zavěšení nad MK4 , čelem k sobě - nikoliv dozadu, jsem potřeboval otočit pořadí číslic, aby bylo schodné jak na MMU3. První role v pravo, Pátá v levo.</p><p>Tisknul jsem z PETG, černý z oranžovým písmem na zrnitý plát.</p... | [
"r5",
"segmenter"
] | 3D Printers > Prusa Parts & Upgrades | [
"899359/images/image_1_compressed.jpg"
] | [
"899359/stls/segmenter-R5.stl"
] | GPL2.0 | https://www.printables.com/model/899359 | data_0031.tar |
809245 | Segway Navimow GPS 90° wall mount | [
"wall",
"mount",
"mower",
"gps",
"90",
"segway",
"navimow"
] | Household > Outdoor & Garden | [
"809245/images/image_1_compressed.jpg",
"809245/images/image_2_compressed.jpg"
] | [
"809245/stls/Support.stl",
"809245/stls/Wall_Mount.stl"
] | CC-BY | https://www.printables.com/model/809245 | data_0031.tar | |
394850 | Seiko NH movement holder | Movement holder for Seiko NH series of movements | Download free 3D printable STL models | [
"seiko",
"nh34",
"nh36",
"nh35"
] | Hobby & Makers > Tools | [
"394850/images/image_1_compressed.jpg",
"394850/images/image_2_compressed.jpg",
"394850/images/image_3_compressed.jpg"
] | [
"394850/stls/nh36 movement holder v5.stl"
] | CC-BY | https://www.printables.com/model/394850 | data_0031.tar |
564740 | Self Centering Spool Holder for Bambu Lab Spool Roller | <p>I modified the self-centering roller to fit a Bambu Lab spool roller that works with the original bracket so my filament would stay in the center.</p><p>Here's the same model on makerworld if your interested. <a href="https://makerworld.com/en/models/155538#profileId-174911">https://makerworld.com/en/models/155538#p... | [
"bambu",
"bambulab",
"p1p",
"fillimentroller"
] | 3D Printers > Bambu Lab Parts & Upgrades | [
"564740/images/image_1_compressed.jpg",
"564740/images/image_2_compressed.jpg",
"564740/images/image_3_compressed.jpg",
"564740/images/image_4_compressed.jpg",
"564740/images/image_5_compressed.jpg"
] | [
"564740/stls/Bambu Lab spool roller self center.stl"
] | CC-BY | https://www.printables.com/model/564740 | data_0031.tar |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.