model_id stringlengths 1 7 | name stringlengths 2 210 | description stringlengths 0 253k | tags listlengths 0 494 | printables_category stringclasses 80
values | image_paths listlengths 0 289 | stl_paths listlengths 0 2.73k | license stringclasses 7
values | source stringlengths 34 40 | shard_file stringclasses 49
values |
|---|---|---|---|---|---|---|---|---|---|
71535 | Squash Ball Foot | <p>These feet allow you to reduce the noise of your printer by dampening out vibrations with squash balls.</p><p>I printed them in Prusament Orange PETG to match my printer, but any material will work.</p><p>Here is an amazon link to a 4-pack of squash balls that you need to work with the feet: </p><p>https://www.amazo... | [
"feet",
"noisereduction",
"squashball",
"squash",
"squashballfeet"
] | 3D Printers > Other Printer Parts & Upgrades | [
"71535/images/image_1_compressed.jpg"
] | [
"71535/stls/Squash Ball Foot.stl"
] | CC-BY | https://www.printables.com/model/71535 | data_0033.tar |
216831 | Squeeze bottle cap | I use these squeeze bottles for hydroponic nutrients, and I wanted a cap for when they＇re sitting around. | Download free 3D printable STL models | [
"lid",
"cap",
"bottlecap"
] | Learning > Chemistry & Biology | [
"216831/images/image_1_compressed.jpg",
"216831/images/image_2_compressed.jpg"
] | [
"216831/stls/squeeze_bottle_cap-v003.stl"
] | CC0 | https://www.printables.com/model/216831 | data_0033.tar |
1136328 | Squid 2 Gong-gi mini game | <p>If you enjoy the series "Squid Game 2," this is for you!</p><p>Three types of models are presented along with a unique box where you can place these models. Each model differs in shape, allowing you to choose the one that suits you best.</p><p><strong>Fixed the model of the box and lid </strong></p><h3>Technica... | [
"game",
"squid",
"2",
"squidgame",
"gonggi"
] | Tabletop Miniatures > Miniature Gaming Accessories | [
"1136328/images/image_1_compressed.jpg",
"1136328/images/image_2_compressed.jpg"
] | [
"1136328/stls/box.stl",
"1136328/stls/circle_types 1.stl",
"1136328/stls/circle_types 2.stl",
"1136328/stls/circle_types 3.stl",
"1136328/stls/cube_types 1.stl",
"1136328/stls/cube_types 2.stl",
"1136328/stls/cube_types 3.stl",
"1136328/stls/the lid for the box.stl",
"1136328/stls/the model to displ... | CC-BY | https://www.printables.com/model/1136328 | data_0033.tar |
660964 | squid game | A cookie cutter from the squid game series | Download free 3D printable STL models | [
"squidgame",
"vykrajovatka",
"susenka"
] | Household > Kitchen | [
"660964/images/image_1_compressed.jpg",
"660964/images/image_2_compressed.jpg",
"660964/images/image_3_compressed.jpg"
] | [
"660964/stls/squid game v1.stl_1.stl"
] | CC-BY | https://www.printables.com/model/660964 | data_0033.tar |
76968 | Squid Game - Front Man mask | <p>The Front Man mask from the Netflix series, Squid Game, created by Thingiverse user kimgooni - https://www.thingiverse.com/kimgooni/designs<br><br>3mf file is organised for a good print, and the gcode attached worked perfectly on my Prusa Mini+.<br><br>Have fun, and happy printing! =)</p> | [] | Costumes & Accessories > Cosplay & Costumes in general | [
"76968/images/image_1_compressed.jpg"
] | [
"76968/stls/eye_grill.stl",
"76968/stls/front_man.stl",
"76968/stls/front_man_complete.stl"
] | CC-BY | https://www.printables.com/model/76968 | data_0033.tar |
112172 | Squid Game - Front Man mask - Simplified for Prusa MINI | <p>Based on the extraordinarily accurate model created by Thingiverse user <a href="https://www.thingiverse.com/kimgooni/designs">kimgooni</a>.</p><p>I did some small invisible simplifications on the model to save a couple of hours of printing support structures. It results in 16 hours of printing with most of the defa... | [
"mask",
"squidgame",
"fewsupport"
] | Costumes & Accessories > Cosplay & Costumes in general | [
"112172/images/image_1_compressed.jpg",
"112172/images/image_2_compressed.jpg",
"112172/images/image_3_compressed.jpg"
] | [
"112172/stls/Squid Game Front Man Eye.stl",
"112172/stls/Squid Game Front Man.stl"
] | CC-BY | https://www.printables.com/model/112172 | data_0033.tar |
80514 | Squid Game - Goon mask | <p>An unranked, collapsible Goon mask from the Netflix series, Squid Game, created by Thingiverse user kimgooni - https://www.thingiverse.com/kimgooni/designs<br><br>3mf file is organised for a good print, and the gcode attached worked perfectly on my Prusa Mini+.</p><p>Have fun, and happy printing! =)</p><p><br>Notes&... | [] | Costumes & Accessories > Cosplay & Costumes in general | [
"80514/images/image_1_compressed.jpg",
"80514/images/image_2_compressed.jpg"
] | [
"80514/stls/btm.stl",
"80514/stls/squid_game_goon_updated.stl",
"80514/stls/stopper.stl",
"80514/stls/top_ver2_with_support.stl"
] | CC-BY | https://www.printables.com/model/80514 | data_0033.tar |
1078562 | Squid game cookie cutters | <p>Not too much to it. With season 2 coming up this game can be a nice addition to a Christmas party or a gathering.</p><p>Printing: No supports, 3 perimeters.</p><p>They work great, unfortunately I chose poor dough that is rising too much (as you can see on the last picture) therefore is does not look as good but the ... | [
"game",
"cookie",
"cutter",
"squid",
"cookiecutter"
] | Toys & Games > Board Games | [
"1078562/images/image_1_compressed.jpg",
"1078562/images/image_2_compressed.jpg"
] | [
"1078562/stls/sg-cutter-01.stl",
"1078562/stls/sg-cutter-02.stl",
"1078562/stls/sg-cutter-03.stl",
"1078562/stls/sg-cutter-04.stl"
] | CC-BY | https://www.printables.com/model/1078562 | data_0033.tar |
1341963 | Squid Game Knife | <figure class="media"><oembed url="https://youtube.com/shorts/Eoedx6lnPOg"></oembed></figure> | [] | Toys & Games > Other Toys & Games | [
"1341963/images/image_1_compressed.jpg",
"1341963/images/image_2_compressed.jpg"
] | [
"1341963/stls/Squid Game Knife.stl"
] | CC0 | https://www.printables.com/model/1341963 | data_0033.tar |
1154075 | Squid Game S2 Gong Gi marbles with box | <p><strong>PRINT </strong><i><strong>gong-gi.stl </strong></i><strong>WITH 80-85% SIZE!!</strong><br><br><strong>INSTRUCTIONS</strong></p><ol><li>Separately print the lid and box. No supports.</li><li>Print the marbles with 80-85% sizing with supports on build plate only. I've used the basic supports.</li></ol><p>Enjoy... | [
"easy",
"easyprint",
"korean",
"squidgame",
"gonggi",
"squidgame2",
"gongi",
"koreangame"
] | Toys & Games > Other Toys & Games | [
"1154075/images/image_1_compressed.jpg",
"1154075/images/image_2_compressed.jpg",
"1154075/images/image_3_compressed.jpg"
] | [
"1154075/stls/box.stl",
"1154075/stls/gong-gi.stl",
"1154075/stls/lid.stl"
] | CC0 | https://www.printables.com/model/1154075 | data_0033.tar |
332753 | Squid Games Front Man Mask | <p>Mask worn by the front man/leader in the squid games show.</p><p>Screens/grills included to place behind the eyes of the mask to hide wearers eyes.</p><p> </p><p>model originally uploaded by kimgooni on Thingiverse</p> | [
"games",
"squid",
"masks",
"squidgame",
"masksquidgame"
] | Costumes & Accessories > Masks | [
"332753/images/image_1_compressed.jpg",
"332753/images/image_2_compressed.jpg",
"332753/images/image_3_compressed.jpg",
"332753/images/image_4_compressed.jpg",
"332753/images/image_5_compressed.jpg",
"332753/images/image_6_compressed.jpg",
"332753/images/image_7_compressed.jpg",
"332753/images/image_8... | [
"332753/stls/eye_grill.stl",
"332753/stls/FrontMan_Mask_Rev5_Fixed.stl",
"332753/stls/FrontMan_Mask_with_support_Rev5_Fixed.stl",
"332753/stls/new_eye_grill.stl"
] | CC-BY | https://www.printables.com/model/332753 | data_0033.tar |
1149005 | Squid Games Gonggi - Multicolor & Single Color print | <p>Bring the excitement of Squid Games to life with this Gonggi model! Inspired by the popular Korean game featured in the series, this design is optimized for both multicolor printing and single-color printing. Perfect for fans of the series and those who want to enjoy a classic game with a modern twist.</p><p>Two pri... | [
"squid",
"gonggi",
"squidgames",
"juegosdelcalamar"
] | Toys & Games > Board Games | [
"1149005/images/image_1_compressed.jpg",
"1149005/images/image_2_compressed.jpg",
"1149005/images/image_3_compressed.jpg",
"1149005/images/image_4_compressed.jpg"
] | [
"1149005/stls/SquidGamesBase.stl",
"1149005/stls/SquidGamesCircle Insert.stl",
"1149005/stls/SquidGamesCircle red-blue (insert version).stl",
"1149005/stls/SquidGamesCircle red-blue.stl",
"1149005/stls/SquidGamesSquare Insert.stl",
"1149005/stls/SquidGamesSquare Purple (insert version).stl",
"1149005/st... | CC-BY | https://www.printables.com/model/1149005 | data_0033.tar |
332748 | Squid Games Soldier Mask | <p>The soldier goon mask from squid games. Also comes with the stencils for creating/painting the rank on the mask (triangle, square, circle).</p><p> </p><p>model was created by kimgooni on Thingiverse</p> | [
"mask",
"games",
"squid",
"facemask",
"squidgame",
"masksquidgame"
] | Costumes & Accessories > Masks | [
"332748/images/image_1_compressed.jpg",
"332748/images/image_10_compressed.jpg",
"332748/images/image_11_compressed.jpg",
"332748/images/image_12_compressed.jpg",
"332748/images/image_13_compressed.jpg",
"332748/images/image_14_compressed.jpg",
"332748/images/image_15_compressed.jpg",
"332748/images/i... | [
"332748/stls/btm.stl",
"332748/stls/shape_C.stl",
"332748/stls/shape_S.stl",
"332748/stls/shape_T.stl",
"332748/stls/stencil_C.stl",
"332748/stls/stencil_S.stl",
"332748/stls/stencil_T.stl",
"332748/stls/stopper.stl",
"332748/stls/top.stl",
"332748/stls/top_ver2.stl",
"332748/stls/top_ver2_with_... | CC-BY | https://www.printables.com/model/332748 | data_0033.tar |
427490 | Squiddy Balisong | <p>infill-30 핸들 및 100 블레이드 및 100 웨이트<br> </p> | [
"balisong",
"squiddy"
] | Toys & Games > Building Toys | [
"427490/images/image_1_compressed.jpg",
"427490/images/image_2_compressed.jpg",
"427490/images/image_3_compressed.jpg"
] | [
"427490/stls/Squiddy Blade.stl",
"427490/stls/Squiddy Handle.stl",
"427490/stls/Squiddy pin 1.stl",
"427490/stls/Squiddy pin2.stl",
"427490/stls/Squiddy pin3.stl",
"427490/stls/Squiddy waher.stl",
"427490/stls/Squiddy Weights.stl"
] | CC0 | https://www.printables.com/model/427490 | data_0033.tar |
215729 | Squiddy Style Balisong Trainer | <p>Balisong trainer with a blunt blade that's designed to be public and child friendly. Inspired by Squid Industries' Squiddy and <a href="https://www.printables.com/model/144597-benchmade-62-balisong-butterfly-knife-m3-fasteners">Benchmade 62</a>.</p><p>Print two sets of handles, one top and one bottom, with one set m... | [
"fidget",
"fidgettoy",
"butterfly",
"knife",
"flip",
"gravity",
"butterflyknife",
"trainer",
"flipper",
"murder",
"balisong",
"balisongknives",
"murderknife",
"valorantknife",
"balisongtrainer",
"knifetrainer",
"fliping",
"squiddy",
"squidindustries"
] | Toys & Games > Other Toys & Games | [
"215729/images/image_1_compressed.jpg",
"215729/images/image_2_compressed.jpg",
"215729/images/image_3_compressed.jpg"
] | [
"215729/stls/Balisong_Blade.stl",
"215729/stls/Balisong_Handle_Bottom.stl",
"215729/stls/Balisong_Handle_Top.stl"
] | CC-BY | https://www.printables.com/model/215729 | data_0033.tar |
272210 | Squidwards piggybank | <p>All the credits for this great model goes to Reno77. This is a remix from <a href="https://www.thingiverse.com/thing:2502026">https://www.thingiverse.com/thing:2502026</a></p><p>If you just want the model or the cup, look there.</p><p>The Piggybank is a little bigger (150 mm), hollowed (wall 2.4 mm), coin-slot (35x3... | [
"octopus",
"spongebob",
"piggybank",
"tirelire",
"thingiverse",
"sparschwein",
"octo",
"spongebobsquarepants",
"squidward",
"squidwardtentacles",
"salvadanaio",
"spaarvarken",
"sparegris"
] | Art & Design > Sculptures | [
"272210/images/image_1_compressed.jpg",
"272210/images/image_2_compressed.jpg",
"272210/images/image_3_compressed.jpg",
"272210/images/image_4_compressed.jpg",
"272210/images/image_5_compressed.jpg",
"272210/images/image_6_compressed.jpg",
"272210/images/image_7_compressed.jpg",
"272210/images/image_8... | [
"272210/stls/Squidwards_House2_piggybank2.stl"
] | CC-BY | https://www.printables.com/model/272210 | data_0033.tar |
112024 | Squirrel |
<p>A Squirrel.</p>
Category: Toys & Games
| [
"tabletop",
"dungeonsanddragons",
"thingiverse"
] | Toys & Games > Outdoor Toys | [
"112024/images/image_1_compressed.jpg",
"112024/images/image_2_compressed.jpg"
] | [
"112024/stls/squirrel.stl"
] | CC-BY | https://www.printables.com/model/112024 | data_0033.tar |
35257 | Squirrel Ornament | <p>I added a ring to the squirrels tail and now he's an ornament!</p>
<h3>Print instructions</h3><h3>Category: Decor Summary</h3>
<p>I added a ring to the squirrels tail and now he's an ornament!</p> | [
"ornament",
"thingiverse",
"christmasornament",
"squirrel"
] | Seasonal designs > Winter & Christmas & New Year's | [
"35257/images/image_1_compressed.jpg",
"35257/images/image_2_compressed.jpg"
] | [
"35257/stls/squirrel_ornament.stl"
] | CC-BY | https://www.printables.com/model/35257 | data_0033.tar |
1286606 | Squirrel withs nuts | [
"nuts",
"squirrel"
] | Toys & Games > Action Figures & Statues | [
"1286606/images/image_1_compressed.jpg"
] | [
"1286606/stls/untitled.stl"
] | CC-BY | https://www.printables.com/model/1286606 | data_0033.tar | |
1027778 | Squirtle pokeball | <p>Squirtle pokeball 2d art :-) print in 2 mm Hight follow in makerworld Turbo9670 for more :-)</p> | [
"pokemon",
"pokeball",
"2dwallart"
] | Art & Design > 2D Plates & Logos | [
"1027778/images/image_1_compressed.jpg",
"1027778/images/image_2_compressed.jpg"
] | [
"1027778/stls/Squirtleball.stl"
] | GPL2.0 | https://www.printables.com/model/1027778 | data_0033.tar |
370578 | Squirtle Pokemon | <p>Just a reupload of some cool squirtle models from Thingiverse. My personal fav is the squritle squad squirtle ofc</p> | [
"pokemon",
"squirtle",
"pokemonfigures",
"pokemonfigure",
"pokemontoy",
"squirtlesquad",
"sunglassessquirtle"
] | Toys & Games > Action Figures & Statues | [
"370578/images/image_1_compressed.jpg",
"370578/images/image_10_compressed.jpg",
"370578/images/image_11_compressed.jpg",
"370578/images/image_12_compressed.jpg",
"370578/images/image_13_compressed.jpg",
"370578/images/image_14_compressed.jpg",
"370578/images/image_2_compressed.jpg",
"370578/images/im... | [
"370578/stls/squirtle_glasses.stl",
"370578/stls/squirtle_macizo.stl",
"370578/stls/squirtle_pose_1.stl",
"370578/stls/squirtle_pose_2.stl",
"370578/stls/squirtle_pose_3.stl",
"370578/stls/squirtle_pose_4.stl",
"370578/stls/squirtle_pose_5.stl"
] | CC0 | https://www.printables.com/model/370578 | data_0033.tar |
230526 | squishmallow kitten | <p>My daughter loves her squishmallow cat plushy, so I made a 3d printed squishmallow kitten!</p><p>This was made in blender sculpt mode, so it's quite large. I've also uploaded a reduced resolution, remeshed version (note that I haven't tried printing the remeshed version yet, so I can't promise it will turn out well!... | [
"cat"
] | Toys & Games > Action Figures & Statues | [
"230526/images/image_1_compressed.jpg"
] | [
"230526/stls/squishmallowcat2.stl",
"230526/stls/squishmallowcat_remesh.stl"
] | CC0 | https://www.printables.com/model/230526 | data_0033.tar |
339641 | Squishy Ball Cat toy (TPU-preffered) | <p>I made this because health class got boring. Nuff said.</p><p> </p><p>Just kidding……. kinda</p><p>This is a fidget I made to be easily printable, low material, and a fun time for your cat. ]</p><p>Print at low infill out of TPU or PLA. I recommend less than 5 percent infill. No brims or supports</p><p>UPDATE***... | [
"toy",
"cat",
"fidget",
"fun",
"tpu",
"kitten"
] | Toys & Games > Other Toys & Games | [
"339641/images/image_1_compressed.jpg",
"339641/images/image_2_compressed.jpg"
] | [
"339641/stls/Squishy_Cube(TPU).stl"
] | CC-BY | https://www.printables.com/model/339641 | data_0033.tar |
905711 | Squishy fidget toy | [] | Toys & Games > Other Toys & Games | [
"905711/images/image_1_compressed.jpg",
"905711/images/image_2_compressed.jpg",
"905711/images/image_3_compressed.jpg"
] | [
"905711/stls/Figit.stl"
] | CC0 | https://www.printables.com/model/905711 | data_0033.tar | |
765787 | Squishy Manatee Keychain | <p>Dive into the charm of the ocean with the "Squishy Manatee Keychain" – a delightful, easy-to-print accessory that brings the gentle spirit of the sea to your pocket. Known for their gentle nature and often referred to as "sea cows" due to their slow movements and grass-eating habits, manatees inspire the design of t... | [
"animal",
"cute",
"gift",
"ocean",
"easy",
"keychain",
"quick",
"simple",
"adorable",
"florida",
"manatee"
] | Art & Design > Other Art & Designs | [
"765787/images/image_1_compressed.jpg"
] | [
"765787/stls/Manatee Keychain.stl"
] | CC-BY | https://www.printables.com/model/765787 | data_0033.tar |
29507 | Squishy Overhang Test | <p>Overhang test</p>
<h3>Print instructions</h3><p>Gcode file here is modified to print with a bit of the bottom chopped off so no supports are needed.</p> | [] | 3D Printers > Test Models | [
"29507/images/image_1_compressed.jpg",
"29507/images/image_2_compressed.jpg"
] | [
"29507/stls/spring-v1.stl"
] | CC0 | https://www.printables.com/model/29507 | data_0033.tar |
328595 | Squishy the Little Octopus | <p>Here is a small cute octopus. I designed it with solidworks based off a stuffed animal I have (named Squishy). The 3d printed octopus is not actually squishy unless you print it out of some sort of squishy filament.</p><h3>Print Settings</h3><p><strong>Printer:</strong></p><p>Qidi Tech 1</p><p><strong>Rafts: </... | [
"octopus",
"animal",
"figurine",
"cute",
"thingiverse",
"cuteoctopus",
"cuteseacreature",
"seacreature",
"cuteanimal",
"animalfigure"
] | Art & Design > Sculptures | [
"328595/images/image_1_compressed.jpg"
] | [
"328595/stls/Squishy.stl"
] | CC-BY | https://www.printables.com/model/328595 | data_0033.tar |
61998 | SRAM 2 CHAIN GAP TOOL | <p>The new model of SRAM chain gap tool provided with AXS derailleurs</p>
<h3> Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Prusa</p>
<p><p class="detail-setting printer"><strong>Printer: </strong> <div><p>I3 MK3S</p></div><strong>Rafts:</strong></p>
<p>No</p>
<p><p class="detail-setting supports"><str... | [
"sram",
"thingiverse",
"axs"
] | Sports & Outdoor > Outdoor Sports | [
"61998/images/image_1_compressed.jpg",
"61998/images/image_2_compressed.jpg",
"61998/images/image_3_compressed.jpg"
] | [
"61998/stls/SRAM2.stl"
] | CC-BY | https://www.printables.com/model/61998 | data_0033.tar |
2757 | SRAM ADJUSTMENT TOOL | <p>Provided with brand new EAGLE 12 speed system, this tool allows you to set the correct distance between the pulley and the cassette.</p>
<h3>Print instructions</h3><p>You are absolutely free !<br/>
I printed it in PLA, no need to set the infill as it's really thin, it will affect only 1 layer if you print it in 0.2m... | [
"tool",
"bike",
"mountainbike",
"sram",
"mtb"
] | Sports & Outdoor > Outdoor Sports | [
"2757/images/image_1_compressed.jpg",
"2757/images/image_2_compressed.jpg",
"2757/images/image_3_compressed.jpg"
] | [
"2757/stls/sram_adjstment_tool.stl"
] | CC0 | https://www.printables.com/model/2757 | data_0033.tar |
708423 | SRAM AXS Charger Holder | <p>If you own more than one bike with a SRAM AXS groupset, you may have accumulated a few of the single battery chargers (EP-EAC-BC-A1) like this one:</p><figure class="image image-style-align-center image_resized" style="width:75%;"><img src="https://media.printables.com/media/prints/708423/rich_content/b1fcf671-db2c-... | [
"charger",
"bike",
"sram",
"mtb",
"batteryholder"
] | Sports & Outdoor > Outdoor Sports | [
"708423/images/image_1_compressed.jpg",
"708423/images/image_2_compressed.jpg",
"708423/images/image_3_compressed.jpg"
] | [
"708423/stls/SRAM AXS 1 x Charger.stl",
"708423/stls/SRAM AXS 2 x Charger.stl",
"708423/stls/SRAM AXS 3 x Charger.stl",
"708423/stls/SRAM AXS 4 x Charger.stl"
] | CC0 | https://www.printables.com/model/708423 | data_0033.tar |
242777 | SRAM Brake Disc |
<p>Just print with support</p>
Category: Tools
| [
"sram",
"thingiverse"
] | Hobby & Makers > Tools | [
"242777/images/image_1_compressed.jpg",
"242777/images/image_2_compressed.jpg"
] | [
"242777/stls/Körper1.stl"
] | CC-BY | https://www.printables.com/model/242777 | data_0033.tar |
101296 | SRAM CHAIN GAP ADJUSTMENT TOOL 52 TEETH 12 SPEED | <p>I printed the STL "original" with an Ultimaker 3 Extended in PETG/PLA.</p><p>You can print the STL "optimized4print" easyer without PVA.</p> | [
"tool",
"chain",
"adjust",
"sram",
"gap",
"cassette",
"derailleurs"
] | Sports & Outdoor > Outdoor Sports | [
"101296/images/image_1_compressed.jpg",
"101296/images/image_2_compressed.jpg",
"101296/images/image_3_compressed.jpg",
"101296/images/image_4_compressed.jpg",
"101296/images/image_5_compressed.jpg"
] | [
"101296/stls/optimized4print.stl",
"101296/stls/original.stl"
] | CC0 | https://www.printables.com/model/101296 | data_0033.tar |
763877 | SRAM chain gap adjustment tool V2 - modified for easier print ;-) | <p>The new model Version 2 of SRAM chain gap adjustment tool provided with AXS derailleurs.</p><p>Works on all SRAM Eagle 12-fach-Cassettes with 50 or 52 teeth as the largest sprocket :-)</p><p> </p><figure class="media"><oembed url="https://www.youtube.com/watch?v=Tj-jDKuz5z0"></oembed></figure> | [] | Sports & Outdoor > Other Sports | [
"763877/images/image_1_compressed.jpg"
] | [
"763877/stls/SRAM_Chain_Gap_Tool_V2.stl"
] | CC-BY | https://www.printables.com/model/763877 | data_0033.tar |
310150 | SRAM Large Bleed Block - For SRAM Code Brakes | <p>This is a replica of the large bleed block that comes in the SRAM bleed kits. It is intended to be used with SRAM Code RSC and SRAM Code R brakes.</p><p>DB8 compatibility: As reported by @Radek, this bleed block can also be used with SRAM DB8 calipers with a very small adjustment. The only required change is to redu... | [
"mountainbike",
"sram",
"code",
"bleedblock",
"brakes",
"bicyclediscbrakes",
"brakebleeding",
"hydraulicbrakes",
"mountainbiking",
"srambrakes",
"db8"
] | Sports & Outdoor > Outdoor Sports | [
"310150/images/image_1_compressed.jpg"
] | [
"310150/stls/SRAM Large Bleed Block.stl"
] | CC-BY | https://www.printables.com/model/310150 | data_0033.tar |
77207 | SRC3D-1: A Raspberry Pi 7" touchscreen rollbar frame. | <p>The shown rollbar frame was sliced using the standard 0.15mm settings from Prusa Slicer and printed using Prusament PETG. The left and right side were printed separately without any support. If you are advanturous, you could try the g-code for both sides in one go. </p><p>For assembly you will need 6mm M3... | [
"frame",
"raspberrypi",
"rpi",
"touchscreen"
] | Hobby & Makers > Mechanical Parts | [
"77207/images/image_1_compressed.jpg",
"77207/images/image_2_compressed.jpg",
"77207/images/image_3_compressed.jpg",
"77207/images/image_4_compressed.jpg",
"77207/images/image_5_compressed.jpg",
"77207/images/image_6_compressed.jpg"
] | [
"77207/stls/RPI base plate.stl",
"77207/stls/RPI left body.stl",
"77207/stls/RPI right body.stl"
] | CC0 | https://www.printables.com/model/77207 | data_0033.tar |
78842 | SRC3D-2: Bowden tube holder for Prusa Mini Base | <p> The Prusa Mini can be upgraded with the Prusa Mini Base and Bondtech IFS sensor. In that case the filament sensor holder (Prusa Mini Base) can be replaced using this bowden tube holder. It should guide the bowden tube to the filament spool.</p><p>Source files: <a href="https://github.com/franksterke/SOURC3D">h... | [
"holder",
"bondtech",
"filament",
"sensor"
] | 3D Printers > Prusa Parts & Upgrades | [
"78842/images/image_1_compressed.jpg",
"78842/images/image_2_compressed.jpg",
"78842/images/image_3_compressed.jpg",
"78842/images/image_4_compressed.jpg"
] | [
"78842/stls/Bowden tube holder vSteve.stl",
"78842/stls/Tube mount v1.stl",
"78842/stls/Tube mount v3.stl"
] | CC-BY | https://www.printables.com/model/78842 | data_0033.tar |
450375 | SSD adapters | <p>This is a 2.5" SSD to 3.5" bay adapter</p><h4><strong>Printing:</strong></h4><p>Support needed on the print bed for the screw holes.</p><p>I printed it in PETG with 20% infill</p> | [
"computer",
"adapter",
"ssd",
"ssdmount"
] | Gadgets > Computers | [
"450375/images/image_1_compressed.jpg"
] | [
"450375/stls/SSD Adapter.stl"
] | CC0 | https://www.printables.com/model/450375 | data_0033.tar |
391572 | SSD HDD mounting for HP EliteDesk ProDesk | <p>SSD HDD caddy mounting for HP EliteDesk ProDesk.</p><p>Just add M3x8 screws and you are all good to go.</p> | [] | Hobby & Makers > Mechanical Parts | [
"391572/images/image_1_compressed.jpg",
"391572/images/image_2_compressed.jpg"
] | [
"391572/stls/HP_HDD_PHILIPS_SCREW.stl"
] | CC0 | https://www.printables.com/model/391572 | data_0033.tar |
405576 | SSD HDD Wall Holder (mount) | <p>Remix for one hdd/ssd with biger hole.<br>v.2 - reduced amount of print material</p><p> </p> | [
"holder",
"wallmount",
"pc",
"ssd",
"ssdmount",
"ssdcase"
] | Gadgets > Computers | [
"405576/images/image_1_compressed.jpg"
] | [
"405576/stls/ssd_hdd_holder.stl",
"405576/stls/V.2_Hdd_holder_low_material.stl"
] | CC-BY | https://www.printables.com/model/405576 | data_0033.tar |
55925 | SSD holder | <p>Držák určený k uchycení SSD disku do pozice HDD.</p>
| [] | Gadgets > Computers | [
"55925/images/image_1_compressed.jpg"
] | [
"55925/stls/ssd.stl"
] | BSD | https://www.printables.com/model/55925 | data_0033.tar |
187586 | SSD Slider for HP Elitedesk 800 G4 TWR 3.5" to 2.5" adapter for sliding 3.5" bay | <p>Remix, just one minor change:</p><p>Had to "cut" one outer sliding ring so that the integrated locking mechanism grabbed the slider.</p><p>This remix is for 2.5" SSDs to fit into a 3.5" bay/slot, for HP Elitedesk 800 G4 TWR.</p><p> </p><p>Without any tools.</p><p>Could also fit for other models.</p><p>A user al... | [
"thingiverse"
] | Gadgets > Computers | [
"187586/images/image_1_compressed.jpg",
"187586/images/image_2_compressed.jpg",
"187586/images/image_3_compressed.jpg"
] | [
"187586/stls/ssd_schlitten_hp_elitedesk_800_g4_twr_v2_cut_vorne.stl"
] | CC-BY | https://www.printables.com/model/187586 | data_0033.tar |
1052095 | SSD1306 OLED Display Screen Case | <p>This is a slim compact case for a SSD1306 I2C 0.96" OLED Display Screen.</p><p>The case was designed based on the measurements of <a href="https://www.aliexpress.com/item/1005006365875586.html">this</a> model I ordered from AliExpress. </p><p>Other boards <strong>do</strong> vary slightly, and the model's clear... | [
"case",
"oled",
"oleddisplay",
"ssd1306",
"ssd1306oled096",
"oled128x64",
"oledcase"
] | Hobby & Makers > Electronics | [
"1052095/images/image_1_compressed.jpg",
"1052095/images/image_2_compressed.jpg",
"1052095/images/image_3_compressed.jpg",
"1052095/images/image_4_compressed.jpg"
] | [
"1052095/stls/SSD1306 OLED Display - Body.stl",
"1052095/stls/SSD1306 OLED Display - Lid.stl"
] | CC-BY | https://www.printables.com/model/1052095 | data_0033.tar |
180131 | SSR terminal cover |
<p>A simple printed terminal cover for two different solid state relays. Beware of Fotek clones!</p>
<p>Companion video here: <a href="https://youtu.be/1VyFejiKkSQ">https://youtu.be/1VyFejiKkSQ</a></p>
Category: Other
| [
"thingiverse",
"ssrcover"
] | Hobby & Makers > Other Ideas | [
"180131/images/image_1_compressed.jpg"
] | [
"180131/stls/large_display_ssr_cover_kudom_180131.stl",
"180131/stls/ssr_cover_fotek.stl",
"180131/stls/ssr_cover_kudom.stl"
] | CC-BY | https://www.printables.com/model/180131 | data_0033.tar |
1126718 | SSV Normandy SR1 | <p>This is my model of the SSV Normandy SR1 from the Mass Effect series. The ship is done in scale with my <a href="https://www.printables.com/model/1042233-ssv-normandy-sr2">SR2</a>. The pieces are divided per their color. <br><br>For the assembly, I recommend to watch the following video.<br><br> </p><figur... | [
"ship",
"star",
"alliance",
"effect",
"normandy",
"mass",
"masseffect",
"sr1"
] | Toys & Games > Vehicles | [
"1126718/images/image_1_compressed.jpg",
"1126718/images/image_2_compressed.jpg",
"1126718/images/image_3_compressed.jpg",
"1126718/images/image_4_compressed.jpg",
"1126718/images/image_5_compressed.jpg"
] | [
"1126718/stls/xxx_-_normandy_sr1_whole.stl",
"1126718/stls/xxx_-_norm_1.stl",
"1126718/stls/xxx_-_norm_1a.stl",
"1126718/stls/xxx_-_norm_2.stl",
"1126718/stls/xxx_-_norm_22_x4.stl",
"1126718/stls/xxx_-_norm_2a.stl",
"1126718/stls/xxx_-_norm_2b.stl",
"1126718/stls/xxx_-_norm_3.stl",
"1126718/stls/xxx... | CC-BY | https://www.printables.com/model/1126718 | data_0033.tar |
1042233 | SSV Normandy SR2 | <p>This is my model of the SSV Normandy SR2 from the Mass Effect series. It is the Alliance version from the third game. The model is some 50cm long and is a kit. The pieces are divided per their color. <br><br>For the assembly, I recommend to watch the following video. <br><br> </p><figure class="media"... | [
"ship",
"star",
"alliance",
"effect",
"normandy",
"mass",
"masseffect",
"sheppard"
] | Toys & Games > Vehicles | [
"1042233/images/image_1_compressed.jpg",
"1042233/images/image_2_compressed.jpg",
"1042233/images/image_3_compressed.jpg",
"1042233/images/image_4_compressed.jpg",
"1042233/images/image_5_compressed.jpg",
"1042233/images/image_6_compressed.jpg",
"1042233/images/image_7_compressed.jpg",
"1042233/images... | [
"1042233/stls/xxx_-_connector15x30.stl",
"1042233/stls/xxx_-_conn_small_4x.stl",
"1042233/stls/xxx_-_normandy_whole.stl",
"1042233/stls/xxx_-_norm_1.stl",
"1042233/stls/xxx_-_norm_10.stl",
"1042233/stls/xxx_-_norm_11.stl",
"1042233/stls/xxx_-_norm_13.stl",
"1042233/stls/xxx_-_norm_14.stl",
"1042233/... | CC-BY | https://www.printables.com/model/1042233 | data_0033.tar |
1164853 | SSV Tempest | <p>This is my model of the SSV Tempest from the Mass Effect Andromeda. The model is some 60cm long and is a kit. The pieces are divided per their color. It is unfortunately not in scale with my other Mass Effect ships as it would have to be only 20cm long. So, if you wish to print it in scale, you have to make it ... | [
"ship",
"space",
"effect",
"mass",
"andromeda",
"tempest"
] | Toys & Games > Vehicles | [
"1164853/images/image_1_compressed.jpg",
"1164853/images/image_2_compressed.jpg",
"1164853/images/image_3_compressed.jpg",
"1164853/images/image_4_compressed.jpg",
"1164853/images/image_5_compressed.jpg",
"1164853/images/image_6_compressed.jpg",
"1164853/images/image_7_compressed.jpg",
"1164853/images... | [
"1164853/stls/xxx_-_pin_10x10.stl",
"1164853/stls/xxx_-_stand.stl",
"1164853/stls/xxx_-_tempest_whole.stl",
"1164853/stls/xxx_m_temp_1.stl",
"1164853/stls/xxx_m_temp_2.stl",
"1164853/stls/xxx_m_temp_3.stl",
"1164853/stls/xxx_m_temp_5.stl",
"1164853/stls/xxx_x_pin_8_4x13.stl",
"1164853/stls/xxx_x_tem... | CC-BY | https://www.printables.com/model/1164853 | data_0033.tar |
32770 | Stability Feet for 'Prusa Steel Sheet Holder' +V2 | <p>This is an addition to the 'Prusa Steel Sheet Holder 2er, 3er and 4er' to improve stability.</p><p>Problem: the surface area of the 2 slot version of the sheet holder is small and the sheets are tall, this causes the holder to fall on the side if hit.</p><p>Solution: these two feet help to improve the stability incr... | [
"upgrade",
"mk3s",
"feet",
"sheetholder"
] | 3D Printers > Accessories | [
"32770/images/image_1_compressed.jpg",
"32770/images/image_10_compressed.jpg",
"32770/images/image_11_compressed.jpg",
"32770/images/image_2_compressed.jpg",
"32770/images/image_3_compressed.jpg",
"32770/images/image_4_compressed.jpg",
"32770/images/image_5_compressed.jpg",
"32770/images/image_6_compr... | [
"32770/stls/feet_3er.stl",
"32770/stls/feet_4er.stl",
"32770/stls/[NEW] 2021_Feet_V2.stl",
"32770/stls/[NEW] Foot_V2.stl",
"32770/stls/[OLD] feet_2er.stl"
] | CC-BY | https://www.printables.com/model/32770 | data_0033.tar |
617649 | Stabilo Organizer | <p>Organizer für Stabilo Leuchtmarker auf dem Arbeitstisch</p> | [
"organizer",
"desk",
"smart",
"stabilo"
] | Hobby & Makers > Organizers | [
"617649/images/image_1_compressed.jpg"
] | [
"617649/stls/Stabilo Halterung.stl"
] | CC0 | https://www.printables.com/model/617649 | data_0033.tar |
785422 | Stable Knitting/Crocheting bowl (Three versions) | <p>A knitting bowl to prevent yarn balls from running away is a thoughtful gift for your grandmother. :) <br><br>Simple to print, just need to add several supports (example at photo)<br><br>P.S. Added an updated design with extra holes.<br> </p> | [
"knitting",
"yarn",
"crocheting"
] | Art & Design > Other Art & Designs | [
"785422/images/image_1_compressed.jpg",
"785422/images/image_2_compressed.jpg",
"785422/images/image_3_compressed.jpg",
"785422/images/image_4_compressed.jpg",
"785422/images/image_5_compressed.jpg"
] | [
"785422/stls/Knitting Bowl with smaller gaps and higher resolution (smoother) V3.stl",
"785422/stls/Knitting Bowl with center hole V2.stl",
"785422/stls/Knitting Bowl with holes V2.stl",
"785422/stls/Knitting-Bowl_V1.stl"
] | GPL2.0 | https://www.printables.com/model/785422 | data_0033.tar |
55791 | stable sheet holder | <p>The holder fits mostly all available sheets for 3D printing and fits in origin dimensions sheets with thickness of 3mm. The thickness can be easily increased/decreased by dimension adjustments for the width within Prusa Slicer.</p>
<p>The holder does not need more space on a bench than its footprint.</p>
<p>In addit... | [
"easytoprint",
"sheetholder",
"stable"
] | Hobby & Makers > Organizers | [
"55791/images/image_1_compressed.jpg",
"55791/images/image_2_compressed.jpg",
"55791/images/image_3_compressed.jpg",
"55791/images/image_4_compressed.jpg",
"55791/images/image_5_compressed.jpg",
"55791/images/image_6_compressed.jpg",
"55791/images/image_7_compressed.jpg",
"55791/images/image_8_compres... | [
"55791/stls/sheet_holder_v1.stl"
] | CC0 | https://www.printables.com/model/55791 | data_0033.tar |
633448 | Stack 'n Paint: Stackable Citadel Paint Bottle Organizer | <p>This modular container snugly fits 20 Citadel paint bottles in a 4x5 arrangement, inspired by the efficiency of milk crates. <br><br>Stack multiple units seamlessly for an organized, space-saving solution. <br><br>Whether you're a hobbyist or a pro, keep your paints easily accessible and your workspace clu... | [
"container",
"crate",
"stackable",
"citadel",
"storage",
"printinplace",
"rack",
"paint",
"painting",
"milk",
"citadelpaint",
"gamesworkshop",
"citadelpaintrack"
] | Hobby & Makers > Organizers | [
"633448/images/image_1_compressed.jpg"
] | [
"633448/stls/Citadel_Paint_Storage.stl",
"633448/stls/empty tall.stl",
"633448/stls/empty.stl"
] | GPL2.0 | https://www.printables.com/model/633448 | data_0033.tar |
661509 | Stack 'n Paint: Stackable Vallejo Paint Bottle Organizer | <p>This modular container snugly fits 30 Vallejo paint bottles in a 6x5 arrangement, inspired by the efficiency of milk crates. <br><br>Stack multiple units seamlessly for an organized, space-saving solution. <br><br>Whether you're a hobbyist or a pro, keep your paints easily accessible and your workspace clu... | [
"container",
"crate",
"stackable",
"storage",
"printinplace",
"rack",
"paint",
"painting",
"milk",
"vallejo",
"vallejopaintholder"
] | Hobby & Makers > Organizers | [
"661509/images/image_1_compressed.jpg"
] | [
"661509/stls/empty tall.stl",
"661509/stls/empty.stl",
"661509/stls/Vallejo_Paint_Storage.stl"
] | GPL2.0 | https://www.printables.com/model/661509 | data_0033.tar |
447640 | Stack Overflow Bookend | <p>A bookend which is modelled based off of the stack overflow logo, for any fellow nerds out there who also like reading. The orange stack slots into the grey base, you may want to use glue or some other method to keep it nice and secure in there. the stack is best printed on its side for minimal use of support. ... | [
"book",
"stack",
"bookshelf"
] | Gadgets > Computers | [
"447640/images/image_1_compressed.jpg",
"447640/images/image_2_compressed.jpg",
"447640/images/image_3_compressed.jpg"
] | [
"447640/stls/stackoverflowbookend-stack (orange).stl",
"447640/stls/stackoverflowbookend_assembled.stl",
"447640/stls/stackoverflowbookend_base (grey).stl"
] | CC-BY | https://www.printables.com/model/447640 | data_0033.tar |
735932 | Stackable 12 Egg Rack | <p>Original design from @YamahaRider_168128 was great, but I found it a bit crammed when filling with large size eggs from the store. The varying sizes of eggs led to all of the eggs touching each other and some not sitting all the way down in their slot. I was unable to stack 2 racks since some eggs would ... | [
"kitchen",
"crate",
"fridge",
"tray",
"rack",
"eggtray",
"eggholder"
] | Household > Kitchen | [
"735932/images/image_1_compressed.jpg",
"735932/images/image_2_compressed.jpg"
] | [
"735932/stls/Stackable 12 Egg Rack.stl"
] | CC0 | https://www.printables.com/model/735932 | data_0033.tar |
206374 | Stackable 18650 Beer Crate | <p>Stackable 18650 Battery Beer Crate</p>
<p>Simple to print model that prints without the need for supports and stacks with the other Stackable Beer Crates in this series.</p>
<p>Holds 12 18650 batteries</p>
<h3>Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Prusa</p>
<p class="detail-setting printer"><... | [
"thingiverse",
"18650battery",
"18650batteryholder"
] | Hobby & Makers > Other Ideas | [
"206374/images/image_1_compressed.jpg",
"206374/images/image_2_compressed.jpg"
] | [
"206374/stls/Stackable_18650_Beer_Crate.stl"
] | CC-BY | https://www.printables.com/model/206374 | data_0033.tar |
201065 | Stackable AA Beer Crate | <p>Added in response to a number of requests for a full height stackable version of the AA Beer Crate.</p>
<p>Holds up to 20 cells</p>
<p>Simple to print model without the need for supports (usually!)</p>
<h3>Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Prusa</p>
<p class="detail-setting printer"><stro... | [
"thingiverse",
"aabattery",
"aabatteryholder",
"aabatterystorage",
"aabatterystackable"
] | Hobby & Makers > Other Ideas | [
"201065/images/image_1_compressed.jpg",
"201065/images/image_2_compressed.jpg",
"201065/images/image_3_compressed.jpg"
] | [
"201065/stls/Stackable_AA_Beer_Crate.stl"
] | CC-BY | https://www.printables.com/model/201065 | data_0033.tar |
202532 | Stackable AAA Beer Crate | <p>Stackable AAA Battery Beer Crate</p>
<p>Simple to print model that prints without the need for supports and stacks with the AA battery version here: <a href="https://www.thingiverse.com/thing:5381594">https://www.thingiverse.com/thing:5381594</a></p>
<p>Holds 30 AAA batteries</p>
<h3>Print Settings</h3>
<p><strong>P... | [
"thingiverse",
"aaabatteryholder",
"stackablecontainer",
"aaabatterystorage",
"aaabatterycase",
"aaabatterybox"
] | Hobby & Makers > Other Ideas | [
"202532/images/image_1_compressed.jpg",
"202532/images/image_2_compressed.jpg"
] | [
"202532/stls/Stackable_AAA_Beer_Crate.stl"
] | CC-BY | https://www.printables.com/model/202532 | data_0033.tar |
295705 | Stackable Ammo Box Parametric | <p>I buy cheap reloads in bulk, which come loosely packaged. To transport my ammo I needed some kind of box, which is why I decided to design one.</p><p>I designed this fully parametric in Fusion 360, which allows any caliber to be inputted. I have already added a vast array of calibers by now.</p><p>If you don't have ... | [
"parametric",
"ammo",
"gun",
"shooting",
"thingiverse",
"9mm",
"ammobox",
"45acp",
"308",
"223rem",
"357",
"223",
"556",
"556nato",
"762x39",
"40sw",
"223remington",
"38special",
"308winchester",
"762x51",
"357magnum"
] | Sports & Outdoor > Outdoor Sports | [
"295705/images/image_1_compressed.jpg",
"295705/images/image_2_compressed.jpg"
] | [
"295705/stls/Ammo_Box_223.stl",
"295705/stls/Ammo_Box_22LR.stl",
"295705/stls/Ammo_Box_243_Winchester.stl",
"295705/stls/Ammo_Box_270_Winchester.stl",
"295705/stls/Ammo_Box_308_Winchester.stl",
"295705/stls/Ammo_Box_338_Lapua.stl",
"295705/stls/Ammo_Box_357_Magnum.stl",
"295705/stls/Ammo_Box_40_SW.stl... | CC-BY | https://www.printables.com/model/295705 | data_0033.tar |
1069568 | Stackable Basket Box | <p>This is a little stackable Storage Box. You can print it with the draft setting and it works just fine.<br><br>There are two types, one stackable, one non stackable. They are nearly identical.<br><br>Hope you have fun printing and can use it!</p> | [
"hexagon",
"box",
"stackable",
"storage",
"storagebox",
"storagesystem",
"hex",
"basket",
"easyprint",
"stable",
"storagecontainer",
"storagebin",
"storagetray",
"storagesolution",
"sotragebin"
] | Hobby & Makers > Organizers | [
"1069568/images/image_1_compressed.jpg",
"1069568/images/image_2_compressed.jpg"
] | [
"1069568/stls/Basket non Stackable.stl",
"1069568/stls/Basket Stackable.stl"
] | CC0 | https://www.printables.com/model/1069568 | data_0033.tar |
114153 | Stackable basket short | <p>I thought the basket made by <strong>kunaaprinting </strong>was a nice basket but it is 12 inches long. This a little long for a Prusa. I printed it out on a CR30 belt printer and liked it but thought it could be a little shorter also. I brought it into Prusa Slicer and cut the bottom off. I than removed a section s... | [] | Hobby & Makers > Organizers | [
"114153/images/image_1_compressed.jpg"
] | [
"114153/stls/Stackable basket short..stl"
] | CC0 | https://www.printables.com/model/114153 | data_0033.tar |
269703 | Stackable Beer Crate - AA Batteries for SKADIS | [
"organizer",
"ikea",
"battery",
"skadis",
"batteryholder",
"aabattery",
"ikeaskadis",
"akkubox"
] | Hobby & Makers > Organizers | [
"269703/images/image_1_compressed.jpg",
"269703/images/image_2_compressed.jpg",
"269703/images/image_3_compressed.jpg",
"269703/images/image_4_compressed.jpg"
] | [
"269703/stls/Bierkiste-Batterien-AA-Skadis.stl"
] | CC0 | https://www.printables.com/model/269703 | data_0033.tar | |
761739 | Stackable beer crate for batteries | <p>I love the original crates (thanks <a href="https://www.printables.com/@CADGuy">@CAD-Guy</a>) and have a few printed out, but I didn't have any glue to fix on the base that makes them stackable, so I remixed the original to allow the crates to stack without any additional parts.</p><p>This model has tabs in the corn... | [] | Hobby & Makers > Organizers | [
"761739/images/image_1_compressed.jpg",
"761739/images/image_2_compressed.jpg",
"761739/images/image_3_compressed.jpg",
"761739/images/image_4_compressed.jpg",
"761739/images/image_5_compressed.jpg"
] | [
"761739/stls/18650 Crate - Corner Tabs.stl",
"761739/stls/9V BeerCrates - CornerTabs.stl",
"761739/stls/AA BeerCrates - CornerTabs.stl",
"761739/stls/AAA BeerCrates - CornerTabs.stl",
"761739/stls/BasePlate 1x1.stl",
"761739/stls/BasePlate 1x2.stl",
"761739/stls/BasePlate 1x3.stl",
"761739/stls/BasePl... | CC-BY | https://www.printables.com/model/761739 | data_0033.tar |
179090 | stackable beer crate for CR2032 and other button cells version 2 | <p>I love the beer crates for storage! My button cells needed a new home, so I remixed again :-)</p><p>This is a remix of 2 things, the famous battery beer crates and and a similar model found on thingiverse.</p><p>I made some changes to the original thingiverse model:</p><ul><li>the thingiverse model was not based on ... | [
"beer",
"organizer",
"crate",
"battery",
"cr2032",
"lr44",
"tweezers",
"lr41",
"cr1620",
"cr1632",
"cr1616"
] | Hobby & Makers > Organizers | [
"179090/images/image_1_compressed.jpg",
"179090/images/image_2_compressed.jpg",
"179090/images/image_3_compressed.jpg",
"179090/images/image_4_compressed.jpg",
"179090/images/image_5_compressed.jpg",
"179090/images/image_6_compressed.jpg"
] | [
"179090/stls/beer_crate_CR2032.stl",
"179090/stls/beer_crate_CR2032_insert_cover_v2.stl",
"179090/stls/beer_crate_CR2032_insert_v2.stl"
] | GPL2.0 | https://www.printables.com/model/179090 | data_0033.tar |
397223 | Stackable Box V5+ | <p>I loved <a href="https://www.printables.com/social/268457-stonehome/about">Stonehome</a>'s remix of Gushie's box, but I wanted more space on the front for labeling box contents. Without a label I have trouble casually distinguishing a #6 screw from a #8 screw. I've increased the front-facing vertical fac... | [
"box",
"stackable",
"stackablebox",
"toolboxorganizer",
"stackableboxv5",
"toolboxdrawerorganizer"
] | Hobby & Makers > Organizers | [
"397223/images/image_1_compressed.jpg",
"397223/images/image_2_compressed.jpg",
"397223/images/image_3_compressed.jpg",
"397223/images/image_4_compressed.jpg"
] | [
"397223/stls/stack_box_half_larger_front.stl",
"397223/stls/stack_box_larger_front.stl"
] | CC-BY | https://www.printables.com/model/397223 | data_0033.tar |
381383 | Stackable Box Version3 | I redesigned this box. It fits the Thingiverse stackable boxes, giving you a wide range of boxes to choose from. | Download free 3D printable STL models | [] | Gadgets > Other Gadgets | [
"381383/images/image_1_compressed.jpg",
"381383/images/image_2_compressed.jpg",
"381383/images/image_3_compressed.jpg"
] | [
"381383/stls/Stapelbox neu 52 geschlossen.stl"
] | CC0 | https://www.printables.com/model/381383 | data_0033.tar |
96122 | Stackable box / Basket |
<h3> Stackable boxes, baskets</h3>
<p>Made these baskets, that fit together, couldn't find any that could stack on top of each other on thingiverse so decided to design my own.</p>
<p>pretty happy with the result, hope others find them useful</p>
<p>There are two versions:</p>
<p>Stackable basket_original - is the ori... | [
"box",
"case",
"stackable",
"storage",
"basket",
"thingiverse"
] | Household > Office | [
"96122/images/image_1_compressed.jpg",
"96122/images/image_2_compressed.jpg",
"96122/images/image_3_compressed.jpg",
"96122/images/image_4_compressed.jpg",
"96122/images/image_5_compressed.jpg",
"96122/images/image_6_compressed.jpg",
"96122/images/image_7_compressed.jpg"
] | [
"96122/stls/stackable_basket_light_L.stl",
"96122/stls/stackable_basket_original_L.stl"
] | CC-BY | https://www.printables.com/model/96122 | data_0033.tar |
691517 | Stackable Boxes | <p>Stackable boxes for organization and large box will fit pencils. </p> | [
"box",
"pencil",
"stackable",
"boxes",
"stackablebox"
] | Hobby & Makers > Organizers | [
"691517/images/image_1_compressed.jpg"
] | [
"691517/stls/Modular stackable box pla.stl",
"691517/stls/Modular stackable pencil box pla v2.stl"
] | CC-BY | https://www.printables.com/model/691517 | data_0033.tar |
14587 | Stackable Can Rack | <p>A stackable can rack that is easy to print and assemble. Print two crossbars and two rack bodies.</p>
<p>I would suggest adding some rubber, or something grippy, to the area that touches the can. The racks tend to slide around a bit.</p>
<p>Update! I added strips of rubber to the rack and, as suspected, it makes it ... | [
"beer",
"can",
"fridge",
"stackable",
"rack",
"thingiverse"
] | Household > Kitchen | [
"14587/images/image_1_compressed.jpg",
"14587/images/image_2_compressed.jpg",
"14587/images/image_3_compressed.jpg",
"14587/images/image_4_compressed.jpg",
"14587/images/image_5_compressed.jpg"
] | [
"14587/stls/cross_bar.stl",
"14587/stls/rack-body-4-can.stl",
"14587/stls/rack_body.stl",
"14587/stls/thin-can-rack-4-can.stl"
] | CC-BY | https://www.printables.com/model/14587 | data_0033.tar |
71827 | Stackable Container - Vase Mode | <p>The Print is meant to be printed in <strong>Vase mode</strong> and to be very <strong>cost efficient</strong>. </p><p><strong>No supports</strong> needed. </p><p>The pattern gives it extra stiffness in vertical direction.</p><p>Print with 0.4mm nozzle at 0.3mm layer height.</p><p>If you want a different wa... | [
"organizer",
"container",
"stackable",
"tray",
"vasemode",
"organization",
"stackablecontainer"
] | Hobby & Makers > Organizers | [
"71827/images/image_1_compressed.jpg",
"71827/images/image_2_compressed.jpg"
] | [
"71827/stls/Container_0.8.stl"
] | CC-BY | https://www.printables.com/model/71827 | data_0033.tar |
1232201 | Stackable Containers | <p>Dimensions: </p><p>Length Width Height</p><p>97mm x 77mm x 70mm</p><p> </p><p> </p><p>UPDATES</p><p>26.03.2025</p><ul><li>ADD Container without label </li><li>ADD STEP FILE</li></ul> | [
"organizer",
"container"
] | Hobby & Makers > Organizers | [
"1232201/images/image_1_compressed.jpg",
"1232201/images/image_2_compressed.jpg"
] | [
"1232201/stls/container WITH Label.stl",
"1232201/stls/Container WITHOUT Label .stl",
"1232201/stls/pins.stl"
] | GPL3.0 | https://www.printables.com/model/1232201 | data_0033.tar |
1182996 | Stackable Crate | <p>Small stackable crate I've designed. The original size is 150x95 mm, which prints fine with a 0.4mm Nozzle. When scaling down, I would recommend using a smaller one.</p><p>It prints fine without support if your Bridging is well tuned. Else, some custom support might be necessary inside the handles.</p><p>The CAD-fil... | [
"box",
"case",
"container",
"crate",
"stackable",
"organization"
] | Household > Other House Equipment | [
"1182996/images/image_1_compressed.jpg"
] | [
"1182996/stls/crate_mesh_bottom_150x95.stl",
"1182996/stls/crate_solid_bottom_150x95.stl"
] | CC-BY | https://www.printables.com/model/1182996 | data_0033.tar |
76124 | Stackable Crate (large) | <p><strong>UPDATE 5-14-2023: </strong>By request, added a half high crate. Then also made a quarter crate (half high, half length) so these can stack correctly based upon the Large Crate size.</p><p><strong>UPDATE 2-10-2021:</strong> Added a double-wide large crate by request. 190mm wide x 205.6mm deep x 100mm tall. Al... | [
"box",
"container",
"crate",
"stackable",
"storage",
"storagebox",
"thingiverse",
"smallpartsstorage",
"stackablecontainer",
"stackablebox"
] | Household > Other House Equipment | [
"76124/images/image_1_compressed.jpg",
"76124/images/image_10_compressed.jpg",
"76124/images/image_11_compressed.jpg",
"76124/images/image_12_compressed.jpg",
"76124/images/image_13_compressed.jpg",
"76124/images/image_2_compressed.jpg",
"76124/images/image_3_compressed.jpg",
"76124/images/image_4_com... | [
"76124/stls/Double_Large_Crate_206mm.stl",
"76124/stls/Half Crate_240mm.stl",
"76124/stls/Large_Crate_206mm.stl",
"76124/stls/Large_Crate_240mm.stl",
"76124/stls/Quarter Crate_120mm.stl"
] | CC-BY | https://www.printables.com/model/76124 | data_0033.tar |
784368 | Stackable crate + lid + variants | <p>The crate measures 150 mm in length, 95 mm in width, and 55 mm in height.</p><p>The crate without the top stackable pins is 52.5 mm high.</p><p>The crate is stackable. </p><p>made to be compatible with: <a href="https://www.printables.com/model/1182996-stackable-crate">https://www.printables.com/model/1182996-s... | [
"box",
"organizer",
"crate",
"stackable",
"storage"
] | Hobby & Makers > Organizers | [
"784368/images/image_1_compressed.jpg",
"784368/images/image_2_compressed.jpg"
] | [
"784368/stls/crate_v3.stl",
"784368/stls/crate_v3_no_stacking_parts.stl",
"784368/stls/crate_v3_no_top_stacking_parts.stl",
"784368/stls/crate_v3_solid_bottom.stl",
"784368/stls/crate_v3_solid_bottom_no_stacking_parts.stl",
"784368/stls/crate_v3_solid_bottom_no_top_stacking_parts.stl",
"784368/stls/crat... | CC-BY | https://www.printables.com/model/784368 | data_0033.tar |
1048653 | Stackable Cup Shelf (parametric) | [
"shelf",
"voronoi"
] | Household > Kitchen | [
"1048653/images/image_1_compressed.jpg",
"1048653/images/image_2_compressed.jpg",
"1048653/images/image_3_compressed.jpg",
"1048653/images/image_4_compressed.jpg"
] | [
"1048653/stls/Cup Shelf - 170x140x100.stl",
"1048653/stls/Cup Shelf - 170x140x140.stl",
"1048653/stls/Cup Shelf - 170x140x60.stl",
"1048653/stls/Cup Shelf - 170x170x140.stl",
"1048653/stls/Cup Shelf - ring.stl"
] | CC-BY | https://www.printables.com/model/1048653 | data_0033.tar | |
308904 | Stackable D-Battery Holder | <p>I have printed out the <a href="https://www.thingiverse.com/thing:4713078">Stackable Battery Holders Improved</a> for most of my batteries, and they are great! My few D's felt so left out, and no one should be left out because of their size, right?</p><p>So I present to you my quick hack of the Stackable Battery Hol... | [
"battery",
"thingiverse",
"batteryholder",
"dbattery",
"dbatteryholder"
] | Household > Office | [
"308904/images/image_1_compressed.jpg",
"308904/images/image_2_compressed.jpg",
"308904/images/image_3_compressed.jpg",
"308904/images/image_4_compressed.jpg",
"308904/images/image_5_compressed.jpg",
"308904/images/image_6_compressed.jpg",
"308904/images/image_7_compressed.jpg"
] | [
"308904/stls/D-Base.stl",
"308904/stls/D-Base_Extender.stl",
"308904/stls/D-Cover.stl",
"308904/stls/D-Cover_Extender.stl",
"308904/stls/D-Label.stl"
] | CC-BY | https://www.printables.com/model/308904 | data_0033.tar |
171960 | Stackable Drawer | <h3>About the print:</h3><p>This Drawer-System has been designed to fit as much drawer-space on one build plate.</p><p>New Drawers coming soon.</p><h5>Main standouts:</h5><ul><li>It has a lot of storage space </li><li>Its stackable</li></ul><h3>Size:</h3><p><strong>Stack-Shelf_1U: </stron... | [
"stackable",
"drawer",
"drawerorganizer",
"orginization"
] | Hobby & Makers > Organizers | [
"171960/images/image_1_compressed.jpg",
"171960/images/image_2_compressed.jpg",
"171960/images/image_3_compressed.jpg"
] | [
"171960/stls/#1U_stack_shelf.stl",
"171960/stls/#2U_stack_shelf.stl",
"171960/stls/#stack-top.stl",
"171960/stls/1U-16X-A_Stack-Drawer.stl",
"171960/stls/1U-1X-A_Stack-Drawer.stl",
"171960/stls/1U-2X-A_Stack-Drawer.stl",
"171960/stls/1U-3X-A_Stack-Drawer.stl",
"171960/stls/1U-3X-B_Stack-Drawer.stl",
... | CC-BY | https://www.printables.com/model/171960 | data_0033.tar |
278431 | stackable drawers | <p>I found these stackable drawers an printed 2 pieces scaled down to 80 percent. Then i optimzed the modell for less materialusage and less printtime and more clearence.</p><p>Printed in PLA 210/60, 0,3mm layerheight, 0.4 nozzle, 3 shells, 20% infill, 65mm/s and with brim.</p><p>The 3mf ist downscaled to 80% so ... | [
"stackabledrawers"
] | Hobby & Makers > Organizers | [
"278431/images/image_1_compressed.jpg",
"278431/images/image_2_compressed.jpg"
] | [
"278431/stls/knopf.stl",
"278431/stls/korpus.stl",
"278431/stls/lade.stl",
"278431/stls/stackable_drawers_scaled_80percent.stl"
] | CC0 | https://www.printables.com/model/278431 | data_0033.tar |
887300 | Stackable drawer/organizer for screws/tools/parts | <p>Horizontally and vertically stackable drawers/organizer for small parts, screws, tools and other stuff.</p><p>10 different drawer layouts.</p><p>Label spaces for easier organization.</p> | [
"organizer",
"tool",
"functional",
"stackable",
"storage",
"storagebox",
"toolbox",
"screw",
"organization",
"drawer",
"screwbox"
] | Hobby & Makers > Organizers | [
"887300/images/image_1_compressed.jpg",
"887300/images/image_2_compressed.jpg",
"887300/images/image_3_compressed.jpg",
"887300/images/image_4_compressed.jpg",
"887300/images/image_5_compressed.jpg",
"887300/images/image_6_compressed.jpg"
] | [] | CC0 | https://www.printables.com/model/887300 | data_0033.tar |
118004 | Stackable Egg Cups | <p>These are stackable egg cups that I designed and printed. I also use them as little container for screws while disassembling electronic devices. </p> | [
"organizer",
"stackable",
"egg",
"chicken",
"cups",
"blender3d",
"eggcup",
"eierbecher"
] | Household > Kitchen | [
"118004/images/image_1_compressed.jpg",
"118004/images/image_2_compressed.jpg",
"118004/images/image_3_compressed.jpg",
"118004/images/image_4_compressed.jpg",
"118004/images/image_5_compressed.jpg",
"118004/images/image_6_compressed.jpg"
] | [
"118004/stls/eierbecher_PRINT.stl"
] | CC-BY | https://www.printables.com/model/118004 | data_0033.tar |
88181 | Stackable electronics mini - rack | rack suitable for network switches up to 8 ports | Download free 3D printable STL models | [
"switch",
"rack",
"network"
] | Hobby & Makers > Electronics | [
"88181/images/image_1_compressed.jpg"
] | [
"88181/stls/mini-rack-Body.stl"
] | CC-BY | https://www.printables.com/model/88181 | data_0033.tar |
804218 | Stackable Embroidery Thread Case | <p>This is a storage and carrying solution for embroidery/cross stitch thread on standard bobbins. It consists of multiple trays that stack on top of one another and clamp together with a lid and handle on top. There are several different tray configurations so you can customize it to your number of bobbins and include... | [
"thread",
"embroidery",
"sewing",
"bobbins",
"bobbinholder",
"crossstitch",
"carryingcase",
"embroideryfloss"
] | Hobby & Makers > Organizers | [
"804218/images/image_1_compressed.jpg",
"804218/images/image_2_compressed.jpg",
"804218/images/image_3_compressed.jpg",
"804218/images/image_4_compressed.jpg",
"804218/images/image_5_compressed.jpg",
"804218/images/image_6_compressed.jpg"
] | [
"804218/stls/Thread Tray Base.stl",
"804218/stls/Thread Tray Clip.stl",
"804218/stls/Thread Tray Filler - 2 Slot.stl",
"804218/stls/Thread Tray Filler - 3 Slot.stl",
"804218/stls/Thread Tray Filler - 4 Slot.stl",
"804218/stls/Thread Tray Fully Open.stl",
"804218/stls/Thread Tray Handle.stl",
"804218/s... | CC-BY | https://www.printables.com/model/804218 | data_0033.tar |
287546 | Stackable Exacto and blade grid | <p>**Updated**</p><p>I printed it then realized I have exactos with long covers and were a little hard to pull out so I made 2 version one for short and long covers and extended the aread to make it easier to pull out the exacto </p><p>Remixed the Klaupauzius model for my needs.</p><p>It stacks, holds ... | [
"exactoknife",
"exactoholder",
"gridfinity"
] | Hobby & Makers > Organizers | [
"287546/images/image_1_compressed.jpg",
"287546/images/image_2_compressed.jpg",
"287546/images/image_3_compressed.jpg",
"287546/images/image_4_compressed.jpg"
] | [
"287546/stls/Single exacto long cover.stl",
"287546/stls/Single exacto short cover.stl"
] | CC0 | https://www.printables.com/model/287546 | data_0033.tar |
98431 | Stackable Filament Rack | <p>Here is a simple printable spool rack. Can be adapted for any number of spools. The rack can be stacked for a low footprint storage solution.</p><p>20mm wooden dowel used for the spool storage rack.</p><p> </p><p>Update: 12.01.22</p><p>New version added with 22mm holes.</p><p> </p><p>Update: 30.03.22</p><p... | [
"storage",
"filamentspool",
"filamentstorage",
"prusamentspool"
] | Hobby & Makers > Organizers | [
"98431/images/image_1_compressed.jpg",
"98431/images/image_2_compressed.jpg"
] | [
"98431/stls/Filament Rack - 22mm.stl",
"98431/stls/Filament Rack - 30mm.stl",
"98431/stls/Filament Rack End - 24mm.stl",
"98431/stls/Filament Rack End.stl"
] | GPL2.0 | https://www.printables.com/model/98431 | data_0033.tar |
743644 | Stackable filament rack Top(22mm) finishing shelve and locking joint(all) | <p>I have found the tolerance of the joint to be just enough for a good tight fit. Still removable, but tight enough to keep it stable. I printed mine on a P1P. </p> | [
"filamentspoolholder",
"storage"
] | Hobby & Makers > Organizers | [
"743644/images/image_1_compressed.jpg",
"743644/images/image_2_compressed.jpg",
"743644/images/image_3_compressed.jpg",
"743644/images/image_4_compressed.jpg",
"743644/images/image_5_compressed.jpg",
"743644/images/image_6_compressed.jpg",
"743644/images/image_7_compressed.jpg"
] | [
"743644/stls/Filament Rack top - 22mm.stl",
"743644/stls/Filament Rack top 22mm.stl",
"743644/stls/joint 22mm.stl",
"743644/stls/Joint All.stl"
] | GPL2.0 | https://www.printables.com/model/743644 | data_0033.tar |
432695 | Stackable Game Bits Funnel Tray - Remix | <p>This is a remix of the excellent bit trays by swholmstead .I didn't do anything except extend and taper the base to cut down on print time and filament use. They still stack exactly the same way as the original but because of the scaling issues when importing, they're slightly smaller than the original "large" trays... | [
"boardgames",
"boardgame",
"thingiverse"
] | Toys & Games > Board Games | [
"432695/images/image_1_compressed.jpg",
"432695/images/image_2_compressed.jpg"
] | [
"432695/stls/Game_tray_thick_tapered.stl"
] | CC-BY | https://www.printables.com/model/432695 | data_0033.tar |
773521 | Stackable Gridfinity Deburring Tool Holder | <p>There are some similar models to this, but I couldn't find one that could fit the holder and also the blades in horizontal position without wasting too much space (this one only requires a single additional square). The blades could be arranged a bit better, but it is difficult without wasting more space.</p> | [
"organizer",
"holder",
"organiser",
"holders",
"organizers",
"deburring",
"deburringtool",
"gridfinity",
"organisers",
"gridfinityholder"
] | Hobby & Makers > Organizers | [
"773521/images/image_1_compressed.jpg"
] | [
"773521/stls/gf-deburring.stl"
] | CC-BY | https://www.printables.com/model/773521 | data_0033.tar |
556366 | STACKABLE Gridfinity LR44 Battery Holder, 10 pc. 1x1x3 | <p>I don't know why but the original model is not stackable with the batteries in it. (The red arrow mark in the photos.)<br>So I enlarged its height to 3U and it's stacking nice. <br>Also added a label area because I like the label.</p> | [
"lr44",
"gridfinity"
] | Hobby & Makers > Organizers | [
"556366/images/image_1_compressed.jpg",
"556366/images/image_2_compressed.jpg",
"556366/images/image_3_compressed.jpg"
] | [
"556366/stls/LR44_1x1x3.stl"
] | CC0 | https://www.printables.com/model/556366 | data_0033.tar |
20486 | Stackable hard drive storage basket | <p>Storage trays that were designed for storing laptop hard drives in my collection.</p>
<h3>Print instructions</h3><p>No need for supports.</p> | [
"box",
"stackable",
"storage",
"drive",
"hard",
"basket"
] | Household > Office | [
"20486/images/image_1_compressed.jpg",
"20486/images/image_2_compressed.jpg",
"20486/images/image_3_compressed.jpg",
"20486/images/image_4_compressed.jpg",
"20486/images/image_5_compressed.jpg",
"20486/images/image_6_compressed.jpg"
] | [
"20486/stls/stackable_hard_drive_storage_basket.stl"
] | CC-BY | https://www.printables.com/model/20486 | data_0033.tar |
841636 | Stackable Hexagonal Token Trays for Gaming (optional divider) | <p>The evolution of my 3d printable gaming trays for tokens, resources, etc. have led me to these hexagonal stacking gaming trays.</p><p>I started with spline based profiles revolved around a central axis. Then someone asked me for hexagon shaped ones so they would nest better. Another request was for a div... | [
"hexagon",
"parametric",
"organizer",
"gaming",
"tray",
"boardgame",
"token"
] | Toys & Games > Board Games | [
"841636/images/image_1_compressed.jpg",
"841636/images/image_2_compressed.jpg",
"841636/images/image_3_compressed.jpg",
"841636/images/image_4_compressed.jpg"
] | [
"841636/stls/hex split tray shorter.stl",
"841636/stls/Hex split tray.stl",
"841636/stls/hex tray smaller v7.stl",
"841636/stls/Hex tray.stl",
"841636/stls/hexagonal tray - 50mm x 9.5mm divided.stl",
"841636/stls/hexagonal tray - 50mm x 9.5mm.stl",
"841636/stls/hexagonal tray - 80mm x 18mm divided.stl",... | CC-BY | https://www.printables.com/model/841636 | data_0033.tar |
186572 | Stackable M.2 SSD Tray | <p>After searching high and low for something low profile to keep my drives safe both at home and during travels, I was unable to find anything that suited my needs. Not wishing to use the oversized boxes or unstandardized slippery plastic clamshells they normally come in, I designed this stackable holder instead.</p><... | [] | Gadgets > Computers | [
"186572/images/image_1_compressed.jpg",
"186572/images/image_2_compressed.jpg",
"186572/images/image_3_compressed.jpg",
"186572/images/image_4_compressed.jpg",
"186572/images/image_5_compressed.jpg",
"186572/images/image_6_compressed.jpg",
"186572/images/image_7_compressed.jpg",
"186572/images/image_8... | [
"186572/stls/Cover.stl",
"186572/stls/Tray.stl"
] | GPL2.0 | https://www.printables.com/model/186572 | data_0033.tar |
99236 | Stackable Measuring Cups | <p>Update 01/13/2025</p><p>I have added a teepoon-sized cup (5ml). The Tablespoon is around 15ml so you just need to print the 1/16th cup for this. </p><p>----------------------------------------------------------------------------------------------------------------</p><p>Hello everyone.</p><p>So I designed measu... | [
"cup",
"tool",
"baking",
"3dprinting",
"measure",
"creality",
"pla",
"tools",
"cups",
"ender3",
"thingiverse",
"measuring",
"crealityender3",
"tablespoon",
"teaspoon",
"measuringcup",
"ironing",
"grey"
] | Household > Kitchen | [
"99236/images/image_1_compressed.jpg",
"99236/images/image_2_compressed.jpg"
] | [
"99236/stls/cup_1.stl",
"99236/stls/cup_1_16.stl",
"99236/stls/cup_1_2.stl",
"99236/stls/cup_1_3.stl",
"99236/stls/cup_1_4.stl",
"99236/stls/cup_1_8.stl",
"99236/stls/cup_2_3.stl",
"99236/stls/cup_3_4.stl",
"99236/stls/cup_tee.stl"
] | CC-BY | https://www.printables.com/model/99236 | data_0033.tar |
371635 | Stackable Measuring Cup: 1/3 cup, animal themed | <p>My wife asked me to print a ⅓ cup… but she wanted it to be cute. So I bring you the cute remix of the ⅓ stackable measuring cup.</p> | [
"cup",
"tool",
"baking",
"measure",
"tools",
"cups",
"measuring"
] | Household > Kitchen | [
"371635/images/image_1_compressed.jpg",
"371635/images/image_2_compressed.jpg",
"371635/images/image_3_compressed.jpg"
] | [
"371635/stls/Cat Scoop One Third Cup.stl"
] | CC-BY | https://www.printables.com/model/371635 | data_0033.tar |
297819 | Stackable mini box |
<p>stackable mini box.</p>
<h3>Print Settings</h3>
<p><strong>Printer:</strong></p>
<p>M802P</p>
<p class="detail-setting rafts"><strong>Rafts: </strong>
<div><p>No</p></div>
<p><strong>Supports:</strong></p>
<p>No</p>
<p class="detail-setting resolution"><strong>Resolution: </strong>
<div><p>0.2mm</p></div>
<p><str... | [
"box",
"container",
"stackable",
"thingiverse",
"stackablecontainer",
"accessorycase"
] | Household > Other House Equipment | [
"297819/images/image_1_compressed.jpg",
"297819/images/image_2_compressed.jpg",
"297819/images/image_3_compressed.jpg",
"297819/images/image_4_compressed.jpg",
"297819/images/image_5_compressed.jpg",
"297819/images/image_6_compressed.jpg",
"297819/images/image_7_compressed.jpg"
] | [
"297819/stls/lid.stl",
"297819/stls/minibox_l.stl",
"297819/stls/minibox_m.stl",
"297819/stls/minibox_s.stl"
] | CC-BY | https://www.printables.com/model/297819 | data_0033.tar |
1058634 | Stackable Orbit Sanding Paper Holder 125mm (5") | Stackable Orbit Sanding Paper Holder for 125mm (5＂) 8 hole Sanding Paper. | Download free 3D printable STL models | [
"paper",
"stackable",
"sanding",
"orbital",
"125mm",
"8hole"
] | Hobby & Makers > Tools | [
"1058634/images/image_1_compressed.jpg",
"1058634/images/image_2_compressed.jpg",
"1058634/images/image_3_compressed.jpg"
] | [
"1058634/stls/SandingPaperStackableHolder.stl"
] | CC-BY | https://www.printables.com/model/1058634 | data_0033.tar |
772016 | Stackable paint cone | <ul><li><strong>Stackable Design</strong>: Efficiently designed for easy stacking and storage.</li><li><strong>Durable & Lightweight</strong>: Quick to print and </li><li><strong>Easy to print</strong>: Sufficient bottom surface for good bed adhesion</li></ul> | [
"paint",
"painting",
"cones"
] | Hobby & Makers > Tools | [
"772016/images/image_1_compressed.jpg",
"772016/images/image_2_compressed.jpg",
"772016/images/image_3_compressed.jpg",
"772016/images/image_4_compressed.jpg"
] | [
"772016/stls/Paint cone v6.stl"
] | CC-BY | https://www.printables.com/model/772016 | data_0033.tar |
572515 | Stackable Paper Tray | <p>Stackable paper tray, print as many sections as you need. Fits </p><p>Bambu beds. </p><p>Can be oriented vertically or horizontally.</p><p>No supports required, fits together. Can add a little glue if it's too loose.</p> | [
"organizer",
"office",
"paper",
"modular",
"stackable",
"organization",
"officeorganization"
] | Household > Office | [
"572515/images/image_1_compressed.jpg",
"572515/images/image_2_compressed.jpg"
] | [
"572515/stls/Main with pegs.stl",
"572515/stls/Top no pegs.stl"
] | GPL2.0 | https://www.printables.com/model/572515 | data_0033.tar |
128194 | Stackable parts drawers | <p>Inspired by FatalError3141's Part Tray Drawers. <a href="https://www.thingiverse.com/thing:398548">https://www.thingiverse.com/thing:398548</a></p>
<p>I designed these drawers to be wider to hold larger/more parts, and also stackable so you can assemble more as needed.</p>
<p>Tray designs with 1, 2 and 4 sections in... | [
"organizer",
"desk",
"container",
"tray",
"parts",
"deskorganizer",
"drawer",
"thingiverse"
] | Hobby & Makers > Tools | [
"128194/images/image_1_compressed.jpg",
"128194/images/image_2_compressed.jpg",
"128194/images/image_3_compressed.jpg",
"128194/images/image_4_compressed.jpg",
"128194/images/image_5_compressed.jpg"
] | [
"128194/stls/drawer_2_sections.stl",
"128194/stls/drawer_4_sections.stl",
"128194/stls/drawer_open.stl",
"128194/stls/drawer_tower.stl"
] | CC-BY | https://www.printables.com/model/128194 | data_0033.tar |
163087 | Stackable PCB Standoff |
<p>I made this in order to fit 2 buck converters on top of each other to save space.</p>
<p>PCB Standoffs for small electronics with different heights</p>
<p>The Bottom Piece diameter is 10mm</p>
<p>Pillar is 5mm</p>
<p>Top pin is 2.7ish mm</p>
<p>B(Bottom) - #(Height)</p>
<p>P(Pillar) - #(Height)</p>
<h3>Print Sett... | [
"stand",
"stackable",
"standoff",
"pcb",
"thingiverse",
"pcbholder",
"pcbstandoffs"
] | Hobby & Makers > Electronics | [
"163087/images/image_1_compressed.jpg",
"163087/images/image_10_compressed.jpg",
"163087/images/image_11_compressed.jpg",
"163087/images/image_12_compressed.jpg",
"163087/images/image_13_compressed.jpg",
"163087/images/image_14_compressed.jpg",
"163087/images/image_15_compressed.jpg",
"163087/images/i... | [
"163087/stls/B-10.stl",
"163087/stls/B-11.stl",
"163087/stls/B-12.stl",
"163087/stls/B-13.stl",
"163087/stls/B-14.stl",
"163087/stls/B-6.stl",
"163087/stls/B-7.stl",
"163087/stls/B-8.stl",
"163087/stls/B-9.stl",
"163087/stls/P-10.stl",
"163087/stls/P-11.stl",
"163087/stls/P-12.stl",
"163087/... | CC-BY | https://www.printables.com/model/163087 | data_0033.tar |
39162 | Stackable Planter (110mm) | <p>This stackable planter is Inspired by a design from "3D Printing Nerd" but it's my own implementation. I've made it a while ago but somehow forgot to upload it. So - here you are.</p>
<p>If you like this, you might want to check out my other pots and platers, too:</p>
<p><a href="https://www.printables.com/social/33... | [
"planter",
"fusion360",
"thingiverse",
"autodeskfusion360",
"planters",
"planterpot",
"planterspot",
"gardenplanters"
] | Household > Outdoor & Garden | [
"39162/images/image_1_compressed.jpg",
"39162/images/image_2_compressed.jpg",
"39162/images/image_3_compressed.jpg",
"39162/images/image_4_compressed.jpg"
] | [
"39162/stls/stackableplanterwithsaucer110mmplanterbody1high.stl",
"39162/stls/stackableplanterwithsaucer110mmplanterbody1low.stl",
"39162/stls/stackableplanterwithsaucer110mmsaucerbody1high.stl",
"39162/stls/stackableplanterwithsaucer110mmsaucerbody1low.stl",
"39162/stls/stackableplanterwithsaucer110mmsauce... | CC-BY | https://www.printables.com/model/39162 | data_0033.tar |
71948 | Stackable Puzzle Tray | <p>Stackable puzzle trays for when you don't have enough space.</p> | [
"puzzle"
] | Toys & Games > Puzzles & Brain-teasers | [
"71948/images/image_1_compressed.jpg",
"71948/images/image_2_compressed.jpg",
"71948/images/image_3_compressed.jpg"
] | [
"71948/stls/Stackable Puzzle Tray Deep.stl",
"71948/stls/Stackable Puzzle Tray.stl"
] | CC-BY | https://www.printables.com/model/71948 | data_0033.tar |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.