model_id stringlengths 1 7 | name stringlengths 2 210 | description stringlengths 0 253k | tags listlengths 0 494 | printables_category stringclasses 80
values | image_paths listlengths 0 289 | stl_paths listlengths 0 2.73k | license stringclasses 7
values | source stringlengths 34 40 | shard_file stringclasses 49
values |
|---|---|---|---|---|---|---|---|---|---|
471283 | stringing test - retraction test | <p>petit test pour le stringing</p>
<h3>Print Settings</h3>
<p><strong>Printer:</strong></p>
<p>Alfawise U30</p>
<p class="detail-setting rafts"><strong>Rafts: </strong>
<div><p>No</p></div>
</p>
Category: 3D Printing Tests | [
"thingiverse"
] | 3D Printers > Test Models | [
"471283/images/image_1_compressed.jpg",
"471283/images/image_2_compressed.jpg"
] | [
"471283/stls/Cone_pour_la_retraction.stl"
] | CC-BY | https://www.printables.com/model/471283 | data_0034.tar |
188506 | stringing test poles | <p>Battle stringiness by enhancing retraction and/or wipe, or eliminating Z-hop.</p><p>At the end of the day, a good quality filament or a very dry one will just not string. The two white prints in the picture are simply befor and after a spool was in the oven on 50c turbo for about 3-4 hours.</p><p>If all else failes,... | [
"pole",
"stringing",
"stringingtest"
] | 3D Printers > Test Models | [
"188506/images/image_1_compressed.jpg"
] | [
"188506/stls/stringyness test.stl"
] | CC0 | https://www.printables.com/model/188506 | data_0034.tar |
4908 | Stringing Test Prusa 3S | <p>The Eiffel Tower showed up with some stringing.<br/>
This Test Model is intended to vary parameters</p>
<h3>Print instructions</h3><p>PLA Prusament 0,15 Standard Quality Mode</p> | [] | 3D Printers > Test Models | [
"4908/images/image_1_compressed.jpg"
] | [
"4908/stls/stringing_test.stl"
] | CC0 | https://www.printables.com/model/4908 | data_0034.tar |
132122 | Stringing test towers | <p>Read the guide on stringing and oozing:<br><a href="https://help.prusa3d.com/en/article/stringing-and-oozing_1805">https://help.prusa3d.com/en/article/stringing-and-oozing_1805</a></p><p>Test different retraction lenghts and temperature settings.</p><p>About 8 minutes print time.</p> | [
"test",
"calibration",
"stringing"
] | 3D Printers > Test Models | [
"132122/images/image_1_compressed.jpg",
"132122/images/image_2_compressed.jpg"
] | [
"132122/stls/Stringing tower.stl"
] | CC0 | https://www.printables.com/model/132122 | data_0034.tar |
171937 | Stringing Test / Temp Tower | <p>Very quickly slapped together Stringing Test. Markings 1cm apart so you can post-process z-height changes. Deliberatly no temperature numbers b/c they confuse when you use different temperatures (or - like me - test retract distances instead)</p>
<h3>Print Settings</h3>
<p><strong>Rafts:</strong></p>
<p>No</p>
<p cl... | [
"thingiverse",
"stringing",
"stringingtest"
] | 3D Printers > Test Models | [
"171937/images/image_1_compressed.jpg"
] | [
"171937/stls/Stringing_Test.stl"
] | CC-BY | https://www.printables.com/model/171937 | data_0034.tar |
85 | Striped lizard (multi-material) | <p>Author: Cipis<br/>
<a href="https://www.printables.com/social/18/models">https://www.prusaprinters.org/social/18/prints</a></p>
<p>3-color remix Remix for multi-material printers.</p>
<p>Print takes roughly 3 hours and 40 minutes at 200 µm layer height with 3 materials (Ext. 1 – Green, Ext. 2 – Blue, Ext. 3 – Orang... | [
"multimaterial",
"mmu",
"lizard"
] | World & Scans > Animals | [
"85/images/image_1_compressed.jpg",
"85/images/image_2_compressed.jpg"
] | [] | CC-BY | https://www.printables.com/model/85 | data_0034.tar |
236193 | Striped lizard (multi-material) with pupils | <p>This is the prusa lizard (multi-material) but instead of the eyes being a solid color, I added a pupil.</p> | [
"mmu",
"lizard",
"test",
"mmu2s",
"mmu2",
"mmulizard",
"prusalizard"
] | 3D Printers > Test Models | [
"236193/images/image_1_compressed.jpg",
"236193/images/image_2_compressed.jpg"
] | [
"236193/stls/Lizard.stl"
] | CC-BY | https://www.printables.com/model/236193 | data_0034.tar |
706337 | Stromer Mudguard Extension V9 - ST2, ST3, ST5 and ST7 | The issue with the original front mudguard of the ST2, ST3, ST5 and the ST7 (ST2: the new models with 27,5 inch wheels) is that it is a little too short for rainy road conditions. Without extensions, it is easy to get your shoes and pants wet.
The V9 model can extend the mudguard by 30 cm, 10 cm at the top, and 20 cm ... | [
"parametric",
"fender",
"ebike",
"freecad",
"mudguard"
] | Unknown | [
"706337/images/image_1_compressed.jpg"
] | [
"706337/stls/Stromer_ST3_ST5-Mudguard_Extension_V9_Parametric-Mounts.stl",
"706337/stls/Stromer_ST3_ST5-Mudguard_Extension_V9_Parametric-Mudguard_100mm.stl",
"706337/stls/Stromer_ST3_ST5-Mudguard_Extension_V9_Parametric-Mudguard_200mm.stl"
] | GPL2.0 | https://www.printables.com/model/706337 | data_0034.tar |
1093372 | Stromky | [
"christmas",
"tree",
"christmasdecoration",
"strom",
"suportless",
"vanocniozdoby"
] | Seasonal designs > Winter & Christmas & New Year's | [
"1093372/images/image_1_compressed.jpg",
"1093372/images/image_2_compressed.jpg",
"1093372/images/image_3_compressed.jpg",
"1093372/images/image_4_compressed.jpg"
] | [
"1093372/stls/Stromecek B.stl",
"1093372/stls/Stromecek C.stl",
"1093372/stls/Stromecek D.stl"
] | CC-BY | https://www.printables.com/model/1093372 | data_0034.tar | |
268372 | Strong 25mm Mitre Box | <p>Mitre box for 25mm (3/4") outer diameter PVC pipes</p>
<h3>Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Creality</p>
<p class="detail-setting printer"><strong>Printer: </strong>
<div><p>CR-10</p></div>
<p><strong>Rafts:</strong></p>
<p>Doesn't Matter</p>
<p class="detail-setting supports"><strong>Su... | [
"tool",
"saw",
"thingiverse",
"pvc",
"pvcpipe",
"mitre",
"miterbox",
"miter",
"mitrebox"
] | Hobby & Makers > Tools | [
"268372/images/image_1_compressed.jpg",
"268372/images/image_2_compressed.jpg",
"268372/images/image_3_compressed.jpg",
"268372/images/image_4_compressed.jpg"
] | [
"268372/stls/mitrebox_25mm.stl"
] | CC-BY | https://www.printables.com/model/268372 | data_0034.tar |
1051362 | Strong ASS J-hook! | <p>infill: 30%-100%</p><p>Walls: 3-5 ( depends on how strong it needs to be )</p><p> </p> | [
"tool",
"hook",
"garden",
"wardrobe",
"hanging",
"bathroom",
"keyholder",
"tools",
"jhook",
"wallhook",
"shed",
"orginizer",
"orginization",
"wallhooks",
"fisse",
"jegerfuld"
] | Hobby & Makers > Organizers | [
"1051362/images/image_1_compressed.jpg"
] | [
"1051362/stls/J-HOOK.stl"
] | CC0 | https://www.printables.com/model/1051362 | data_0034.tar |
558365 | Strong cable clip for IKEA Kallax, Besta, and others | <p>I tried similar models from printables.com, but they all had bad tolerances or weak grip strength, so I designed my own.</p><p>In the second photo, I stacked 200g worth of stuff on the clip and it didn't move. Without needing tape for extra friction.</p><h4>Models</h4><p>STL files come pre-generated for two cable di... | [
"shelf",
"ikea",
"desk",
"ikeahack",
"lack",
"ivar",
"cablemanagement",
"cableholder",
"cableclip",
"kallax",
"besta"
] | Household > Office | [
"558365/images/image_1_compressed.jpg",
"558365/images/image_2_compressed.jpg",
"558365/images/image_3_compressed.jpg"
] | [
"558365/stls/clip_besta-center_37.7mm_cable_11mm.stl",
"558365/stls/clip_besta-center_37.7mm_cable_5mm.stl",
"558365/stls/clip_besta-shelf,outer_18.35mm_cable_11mm.stl",
"558365/stls/clip_besta-shelf,outer_18.35mm_cable_5mm.stl",
"558365/stls/clip_besta-top_30.7mm_cable_11mm.stl",
"558365/stls/clip_besta-... | LGPL | https://www.printables.com/model/558365 | data_0034.tar |
1158275 | Strong Carabiner | <p>A very strong carabiner I made years back, I have these all around the house in various colors and filaments. Provided print profile can hold quite a substantial amount of weight, making them perfect for tool storage etc. in addition to keychains, of course.</p><p> </p><p>This model does great printed in PLA be... | [] | Fashion > Other Fashion Accessories | [
"1158275/images/image_1_compressed.jpg",
"1158275/images/image_2_compressed.jpg",
"1158275/images/image_3_compressed.jpg"
] | [
"1158275/stls/CARABINER.stl"
] | CC-BY | https://www.printables.com/model/1158275 | data_0034.tar |
483666 | Strong Chip Bag Clip | <p>Prints in 3 pieces</p> | [
"hook",
"clip",
"chips",
"chipclip",
"chipbagclip"
] | Household > Other House Equipment | [
"483666/images/image_1_compressed.jpg",
"483666/images/image_2_compressed.jpg",
"483666/images/image_3_compressed.jpg"
] | [
"483666/stls/Chip Bag Clip.stl"
] | CC-BY | https://www.printables.com/model/483666 | data_0034.tar |
659163 | Strong Clothespin | Just Print then It's Ready To Use | Provides Strong Clamp | Flex Clip | <p>This design provides strong clamp. Just download then print and use. You don't need to add anything else.</p><p>Don't forget give me a like!</p> | [
"clothespin"
] | Household > Other House Equipment | [
"659163/images/image_1_compressed.jpg",
"659163/images/image_2_compressed.jpg",
"659163/images/image_3_compressed.jpg",
"659163/images/image_4_compressed.jpg",
"659163/images/image_5_compressed.jpg",
"659163/images/image_6_compressed.jpg"
] | [
"659163/stls/clothespin dl.stl"
] | CC0 | https://www.printables.com/model/659163 | data_0034.tar |
191723 | Strong Corner bracket for Ender 5 Plus | <p>Strong Corner bracket for Ender 5 Plus</p><p>100% infill, 0.2 layer height for strength</p><p>Category: 3D Printer Parts</p><p> I used M5 x 20mm Button Head Allen directly screwed into the Creality Ender 5 Plus frame</p><p>A BIG THANK YOU to all the STARS </p><p> </p> | [
"thingiverse"
] | 3D Printers > Creality Parts & Upgrades | [
"191723/images/image_1_compressed.jpg",
"191723/images/image_2_compressed.jpg",
"191723/images/image_3_compressed.jpg",
"191723/images/image_4_compressed.jpg"
] | [
"191723/stls/Shorter_Strong_Corner_bracket_for_Ender_5_Plus.stl"
] | CC-BY | https://www.printables.com/model/191723 | data_0034.tar |
147997 | Strong DN50 50mm Pipe Clamp |
<p>Pipe clamp to fit an 50mm OD Tube,</p>
<p>Snaps onto the pipe after skrewing it on the wall.</p>
<p>Can be used with bolts up to 5mm thickness.</p>
<p>A small M5 washer is intendet to be used to reduce the contact pressure of the bolt onto the plastic.</p>
<p>Printed it in PLA with 40% Infill holds verry tight an... | [
"thingiverse"
] | Household > Outdoor & Garden | [
"147997/images/image_1_compressed.jpg",
"147997/images/image_2_compressed.jpg",
"147997/images/image_3_compressed.jpg",
"147997/images/image_4_compressed.jpg"
] | [
"147997/stls/Pipe_Clamp.stl"
] | CC-BY | https://www.printables.com/model/147997 | data_0034.tar |
272248 | Strong Handle |
<p>A fairly strong, simple and unintentionally classic looking handle.</p>
<p>I needed a functional and strong handle for a project of mine. Originally designed for a 2020-aluminium frame (M5x20), but of course it can be used on other materials.</p>
<p>The bolt/screw-hole is relative long in comparison to other hand... | [
"handle",
"griff",
"handlebar",
"thingiverse",
"2020aluminum",
"asa",
"gripe"
] | Household > Other House Equipment | [
"272248/images/image_1_compressed.jpg",
"272248/images/image_2_compressed.jpg",
"272248/images/image_3_compressed.jpg",
"272248/images/image_4_compressed.jpg",
"272248/images/image_5_compressed.jpg"
] | [
"272248/stls/Handle100mm.stl",
"272248/stls/Handle125mm.stl"
] | CC-BY | https://www.printables.com/model/272248 | data_0034.tar |
585960 | Strong hinge, easy latch, fast printing cable winder with parametric CAD. Print in place cable organizer or wire spool for pegboard | <p>The original is amazing, I rebuilt it in CAD in preparation to organize my own box of cables. There are a few tweaks that I think are nice:</p><ul><li>Bigger clearances<ul><li>The hinge won't stick or break as easily</li><li> </li></ul></li><li>Different latching mechanism<ul><li>More positive engagement,... | [
"parametric",
"cable",
"fusion360",
"printinplace",
"cablemanagement"
] | Hobby & Makers > Organizers | [
"585960/images/image_1_compressed.jpg",
"585960/images/image_2_compressed.jpg",
"585960/images/image_3_compressed.jpg"
] | [
"585960/stls/parametric_cable_winder_by_GekoPrime.stl"
] | CC-BY | https://www.printables.com/model/585960 | data_0034.tar |
641313 | Strong Lack Bracket - Gen2 conform | <p>I wanted to use the <a href="https://www.printables.com/de/model/46044-strong-lack-bracket">Strong Lack Brackets</a> by @Stigern, but I also wanted to mount <a href="https://www.printables.com/de/model/231288-gen2-modular-lack-enclosure-drawers">Gen2</a> drawers over the full width of my Lack. The solution was to us... | [] | Household > Office | [
"641313/images/image_1_compressed.jpg",
"641313/images/image_2_compressed.jpg",
"641313/images/image_3_compressed.jpg"
] | [] | CC0 | https://www.printables.com/model/641313 | data_0034.tar |
52299 | Strong Locking Box - Print in place - NoMMU | <p>A <strong>very strong and resistant box with a lid</strong> and a <strong>3 points lock system</strong> to be sure that it will not open until you decide to.</p><p>The openig procedure is a three-fingers interaction with the hinge so the box is <strong>hard to open until you know how to do it</strong>.</p><ul><li><s... | [
"box",
"organiser",
"open",
"lid",
"lock",
"articulated",
"hinge",
"printinplace",
"security",
"organize",
"close",
"square",
"boite"
] | Hobby & Makers > Organizers | [
"52299/images/image_1_compressed.jpg",
"52299/images/image_10_compressed.jpg",
"52299/images/image_11_compressed.jpg",
"52299/images/image_2_compressed.jpg",
"52299/images/image_3_compressed.jpg",
"52299/images/image_4_compressed.jpg",
"52299/images/image_5_compressed.jpg",
"52299/images/image_6_compr... | [
"52299/stls/lockbox-prusa-edition.stl",
"52299/stls/lockbox.stl",
"52299/stls/logo-prusa.stl"
] | CC-BY | https://www.printables.com/model/52299 | data_0034.tar |
839279 | Strong Printable Clamp | <p>This fully printable C-clamp has been designed so that the <strong>screw portion prints flat</strong> on the print bed, which allows the layer lines to be optimally oriented to create an impressively strong functional clamp.</p><p><strong>Five different sizes</strong> are provided with clamp opening sizes ranging fr... | [
"clamp",
"nosupport",
"nosupportneeded",
"cclamp",
"clamping",
"clamps",
"screwclamp",
"nosupportsneeded",
"clampset",
"nosupports",
"clampingtools",
"clampingsystem"
] | Hobby & Makers > Tools | [
"839279/images/image_1_compressed.jpg",
"839279/images/image_2_compressed.jpg",
"839279/images/image_3_compressed.jpg",
"839279/images/image_4_compressed.jpg",
"839279/images/image_5_compressed.jpg",
"839279/images/image_6_compressed.jpg",
"839279/images/image_7_compressed.jpg"
] | [
"839279/stls/Jumbo - Foot.stl",
"839279/stls/Jumbo - Frame.stl",
"839279/stls/Jumbo - Screw.stl",
"839279/stls/Large - Foot.stl",
"839279/stls/Large - Frame.stl",
"839279/stls/Large - Screw.stl",
"839279/stls/Medium - Foot.stl",
"839279/stls/Medium - Frame.stl",
"839279/stls/Medium - Screw.stl",
"... | CC-BY | https://www.printables.com/model/839279 | data_0034.tar |
913674 | Strong Printable Snap Buckle | <p>This printable side-release snap buckle has been designed so that both sides print flat on the print bed, which allows the layer lines to be optimally oriented to create an impressively strong functional buckle. </p><p>Carefully designed so that <strong>no supports are needed</strong>, and versions to support ... | [
"buckle",
"snapfit",
"nosupport",
"nosupportneeded",
"snaptogether",
"nosupportsneeded",
"nosupports",
"buckles",
"sidereleasebuckle",
"snapbuckle"
] | Sports & Outdoor > Outdoor Sports | [
"913674/images/image_1_compressed.jpg",
"913674/images/image_2_compressed.jpg",
"913674/images/image_3_compressed.jpg",
"913674/images/image_4_compressed.jpg",
"913674/images/image_5_compressed.jpg",
"913674/images/image_6_compressed.jpg",
"913674/images/image_7_compressed.jpg",
"913674/images/image_8... | [
"913674/stls/2.0 cm - Side A.stl",
"913674/stls/2.0 cm - Side B.stl",
"913674/stls/2.5 cm - Side A.stl",
"913674/stls/2.5 cm - Side B.stl",
"913674/stls/3.2 cm - Side A.stl",
"913674/stls/3.2 cm - Side B.stl"
] | CC-BY | https://www.printables.com/model/913674 | data_0034.tar |
44123 | Strong Prusa MK3 MK3S X-Axis Mount for GoPro or Raspberry Pi HQ Camera | <p>I needed a stronger X-Axes camera holder than the ones available, this one is strong enough to not get a wobbly camera.</p>
<p>Camera can pan and tilt.</p>
<p>You will need a nut and bolt (M5) or similar.</p>
<p>Mount is GoPro compatible, I used this thing for my HQ pi Camera <a href="https://www.thingiverse.com/thi... | [
"prusa",
"prusai3",
"gopro",
"mk3",
"mk3s",
"cameramount",
"prusai3mk3",
"xaxis",
"gopromount",
"thingiverse",
"raspberrypicamera",
"raspberrypihqcam"
] | 3D Printers > Prusa Parts & Upgrades | [
"44123/images/image_1_compressed.jpg",
"44123/images/image_2_compressed.jpg",
"44123/images/image_3_compressed.jpg",
"44123/images/image_4_compressed.jpg"
] | [
"44123/stls/arm.stl",
"44123/stls/mount.stl"
] | CC-BY | https://www.printables.com/model/44123 | data_0034.tar |
263026 | Strong Right Angle Shelf Bracket | <p>This is nothing special, just a basic bracket to use in a pinch but is surprisingly strong. I printed mine with 6 walls and 35% infill and have been using 2 of them to hold a wooden shelf with up to 11 rolls of filament at any one time.</p><p>Make sure you use the appropriate wall anchor to mount this to your wall, ... | [
"shelf",
"bracket",
"sturdy",
"strong"
] | Household > Office | [
"263026/images/image_1_compressed.jpg",
"263026/images/image_2_compressed.jpg"
] | [
"263026/stls/Shelf Bracket.stl"
] | CC-BY | https://www.printables.com/model/263026 | data_0034.tar |
1451354 | Strong TPU Strap (Parametric) | <p><strong>A flexible, durable strap printed in Vase Mode - surprisingly strong and incredibly versatile!</strong></p><p>This elastic strap is 3D printed using Vase Mode, creating a flexible yet remarkably strong band. Successfully tested lifting a 16kg kettlebell (with 20mm wide strap) without any deformations!</p><h4... | [
"parametric",
"spiral",
"tpu",
"vasemode",
"strap",
"openscad",
"heavyduty",
"elastic",
"elasticband"
] | Hobby & Makers > Other Ideas | [
"1451354/images/image_1_compressed.jpg",
"1451354/images/image_2_compressed.jpg",
"1451354/images/image_3_compressed.jpg"
] | [
"1451354/stls/strap-large.stl",
"1451354/stls/strap-medium.stl",
"1451354/stls/strap-small.stl",
"1451354/stls/tpu-strap.stl"
] | CC-BY | https://www.printables.com/model/1451354 | data_0034.tar |
222392 | Strong Wall Hook | <p>A relatively big, strong and probably over-engineered hook. How strong is it? Well I have no idea, but quite a bit. I used it in the garden shed to hang a long extension cord which is fairly heavy.</p><p>The hook has an inner diameter of 9 cm and it features a rib on the bottom part which provides a reinforcement to... | [
"wall",
"hook",
"cord",
"hose",
"strong"
] | Household > Outdoor & Garden | [
"222392/images/image_1_compressed.jpg",
"222392/images/image_2_compressed.jpg"
] | [
"222392/stls/Hook.stl"
] | CC-BY | https://www.printables.com/model/222392 | data_0034.tar |
1125066 | Stronger 50mm Version | <p>Greatly reduced the amount of holes on the top and bottom, also adjusted the main body to increase overall strength.</p><p>I also shrank the height of the container to make a 50 mm puck sized container: <a href="https://www.printables.com/model/1222386-stronger-50-mm-puck-size">https://www.printables.com/model/12223... | [
"spool",
"dessicant",
"silica",
"gel"
] | 3D Printers > Prusa Parts & Upgrades | [
"1125066/images/image_1_compressed.jpg",
"1125066/images/image_2_compressed.jpg",
"1125066/images/image_3_compressed.jpg",
"1125066/images/image_4_compressed.jpg",
"1125066/images/image_5_compressed.jpg",
"1125066/images/image_6_compressed.jpg",
"1125066/images/image_7_compressed.jpg"
] | [
"1125066/stls/Stronger cap.stl",
"1125066/stls/Stronger Main Body.stl"
] | CC0 | https://www.printables.com/model/1125066 | data_0034.tar |
268933 | Stronger Ball and Socket Links |
<p>When I tried printing the original ball and socket links, the socket pieces would snap off when assembled. So I made this stronger version which prints on its side. The friction fit is nice and tight. I did have one piece split lengthwise when assembled though, so this still isn't perfect.</p>
<p>I used ASA for m... | [
"ball",
"chain",
"socket",
"joint",
"helpinghands",
"thingiverse",
"ballandsocket",
"balljoint",
"gorilla"
] | Hobby & Makers > Other Ideas | [
"268933/images/image_1_compressed.jpg",
"268933/images/image_2_compressed.jpg",
"268933/images/image_3_compressed.jpg"
] | [
"268933/stls/ball_socket.stl"
] | CC-BY | https://www.printables.com/model/268933 | data_0034.tar |
784434 | Stronger Compact Spool Auto-Rewinder | <p>Original model was working wonderfully, but just on almost empty (light) spools. Reason was I used ASA as material, which is much softer than PLA, under the weight of the full spool the axle deformed a bit, and instead of resting on the bearing, it rested on the friction clutch - which this way lost its function. In... | [
"spool",
"mmu",
"holder",
"rewinder",
"ercf",
"tradrack"
] | 3D Printers > Other Printer Parts & Upgrades | [
"784434/images/image_1_compressed.jpg",
"784434/images/image_2_compressed.jpg",
"784434/images/image_3_compressed.jpg",
"784434/images/image_4_compressed.jpg",
"784434/images/image_5_compressed.jpg",
"784434/images/image_6_compressed.jpg",
"784434/images/image_7_compressed.jpg"
] | [] | GPL2.0 | https://www.printables.com/model/784434 | data_0034.tar |
182260 | stronger mc4 tool |
<p>wanted it slightly thicker</p>
Category: DIY
| [
"solar",
"thingiverse",
"mc4",
"mc4tool"
] | Hobby & Makers > Other Ideas | [
"182260/images/image_1_compressed.jpg",
"182260/images/image_2_compressed.jpg"
] | [
"182260/stls/mc4.stl"
] | CC-BY | https://www.printables.com/model/182260 | data_0034.tar |
58846 | Stronger modular hinge | <p>[EN]</p><p>This is a reinforced version of my modular hinge. I needed a more rigid hinge for my purpose.</p><p>The FreeCAD file is included as usual.</p><p>Details for assembly look here: https://www.prusaprinters.org/prints/58767-modular-hinge</p><p> </p><p>[DE]</p><p>Das ist eine verstärkte Version meines mod... | [
"hinge",
"freecad",
"hinges",
"freecadv018"
] | Hobby & Makers > Mechanical Parts | [
"58846/images/image_1_compressed.jpg",
"58846/images/image_2_compressed.jpg"
] | [
"58846/stls/Scharnier_[kurz].stl",
"58846/stls/Scharnier_[lang].stl",
"58846/stls/Scharnier_[stark].stl"
] | CC-BY | https://www.printables.com/model/58846 | data_0034.tar |
1275466 | Stronger Nozzle replacement tool - MK4S NO SOCK PRUSA NOZZLE | <p>It fits the MK4S printer without a silicone sock installed and standard prusa nozzle </p><p>(it doesnt fit E3D nozzle)</p><p> </p><p>I recommend printing with ABS/ASA/PA or another temperature-resistant filament.</p><p> </p><p>Recomendet print settings :</p><p>minimum 4 perimeters for 0.4mm nozzle</p>... | [
"upgrade",
"prusa",
"tool",
"no",
"fast",
"part",
"nozzle",
"heating",
"quick",
"block",
"sock",
"mk4",
"replacment",
"swap",
"remover",
"02",
"tol",
"04",
"08",
"06",
"mk4s",
"025"
] | 3D Printers > Prusa Parts & Upgrades | [
"1275466/images/image_1_compressed.jpg"
] | [
"1275466/stls/Stronger Nozzle replacement tool - MK4S NO SOCK.stl"
] | GPL2.0 | https://www.printables.com/model/1275466 | data_0034.tar |
1025079 | Stronger Nozzle replacement tool - MK4S sock | I reinforced the standard holder because it was often too weak.
It has stronger sides for holding the heater block and more material in certain areas.
It fits the MK4S printer with a silicone sock installed.
I recommend printing with ABS/ASA/PA or another temperature-resistant filament.
Recomendet print settings :
... | [
"prusa",
"tool",
"holder",
"nozzle",
"block",
"heat",
"sock",
"heatblock",
"mk4s"
] | 3D Printers > Accessories | [
"1025079/images/image_1_compressed.jpg",
"1025079/images/image_2_compressed.jpg"
] | [
"1025079/stls/Stronger Nozzle replacement tool - MK4S sock.stl"
] | GPL2.0 | https://www.printables.com/model/1025079 | data_0034.tar |
1053487 | Stronger Nozzle replacement tool - MK4S sock E3D nozzle | <p>I reinforced the standard holder because it was often too weak.</p><p> </p><p>It has stronger sides for holding the heater block and more material in certain areas.</p><p> </p><p>It fits the MK4S printer with a silicone sock installed and E3D nozzle</p><p> </p><p>I recommend printing with ABS/ASA/PA o... | [
"upgrade",
"prusa",
"tool",
"holder",
"fast",
"nozzle",
"e3d",
"block",
"heat",
"sock",
"mk4",
"replacment",
"hf",
"swap",
"remake",
"mk4s"
] | 3D Printers > Prusa Parts & Upgrades | [
"1053487/images/image_1_compressed.jpg",
"1053487/images/image_2_compressed.jpg",
"1053487/images/image_3_compressed.jpg",
"1053487/images/image_4_compressed.jpg"
] | [
"1053487/stls/Stronger Nozzle replacement tool - MK4S sock E3D.stl"
] | GPL2.0 | https://www.printables.com/model/1053487 | data_0034.tar |
1224223 | Stronger Orange Peeler | <p>Simple way to cleanly peel an orange without getting gunk under your fingernail.</p> | [
"kitchen",
"orange",
"peeler"
] | Household > Kitchen | [
"1224223/images/image_1_compressed.jpg"
] | [
"1224223/stls/orange peeler remix.stl"
] | CC-BY | https://www.printables.com/model/1224223 | data_0034.tar |
499164 | Stronger PTFE Guide for Bambu Lab printers | Removed the holes so it＇s stronger. Otherwise, it＇s the same. | Download free 3D printable STL models | [] | 3D Printers > Bambu Lab Parts & Upgrades | [
"499164/images/image_1_compressed.jpg"
] | [
"499164/stls/untitled.stl"
] | CC0 | https://www.printables.com/model/499164 | data_0034.tar |
1117099 | Stronger Saw - Cardboard | <p>Minor variation to make this stronger than original.</p> | [
"saw",
"cardboard",
"makedo"
] | Toys & Games > Building Toys | [
"1117099/images/image_1_compressed.jpg"
] | [
"1117099/stls/saw.stl"
] | CC-BY | https://www.printables.com/model/1117099 | data_0034.tar |
509152 | Stronger Silica gel spool container | <p>I found that the original version was a bit weak specifically on the bottom of the container and top of the lid. This version has been made a bit stronger so it can be thrown into a container with heavy objects without breaking.<br><br>Only the 75mm version of the container has been modified, but I could modify the ... | [
"container",
"silica",
"funnel",
"desiccant",
"silicagel",
"desiccantcontainer",
"perforated",
"silicagelcontainer"
] | 3D Printers > Accessories | [
"509152/images/image_1_compressed.jpg",
"509152/images/image_2_compressed.jpg"
] | [
"509152/stls/Cap_stronger.stl",
"509152/stls/Container_75mm_stronger.stl",
"509152/stls/funnel.stl"
] | CC0 | https://www.printables.com/model/509152 | data_0034.tar |
701445 | Stronger Silica Gel Spool Container - 50mm | <p>This is a remix of the Stronger Silica Gel Spool Container resized for 50mm.</p> | [
"container",
"dessicant",
"silicagel"
] | 3D Printers > Accessories | [
"701445/images/image_1_compressed.jpg"
] | [
"701445/stls/50mm container.stl",
"701445/stls/cap_stronger.stl"
] | CC-BY | https://www.printables.com/model/701445 | data_0034.tar |
147710 | Stronger Yet Another Fidget Infinity Cube V2 | <p>This is (hopefully, don't actually know) a strong version of Yet Another Fidget Infinity Cube V2. I noticed that whenever it broke it was almost always on the part of a hinge that goes in side one of the cubes. To fix this, I just made it so that both parts of the hinge go into the hinge instead of one going it to t... | [
"infinity",
"cube",
"infinitycube",
"yaficv2",
"yafic",
"strongeryaficv2"
] | Toys & Games > Other Toys & Games | [
"147710/images/image_1_compressed.jpg"
] | [
"147710/stls/Yafic_Stronger.stl"
] | CC-BY | https://www.printables.com/model/147710 | data_0034.tar |
228109 | Strongman Hulk Chicken Arms | <p>Original by <a href="https://www.thingiverse.com/Rnagp">Rnagp</a> - <a href="https://www.thingiverse.com/thing:4862154">https://www.thingiverse.com/thing:4862154</a></p><p> </p><p>Waited for this to show up here long enough. Here it is!</p><p> </p><p>Supports on bed plate only. I used a .4mm ... | [] | Costumes & Accessories > Cosplay & Costumes in general | [
"228109/images/image_1_compressed.jpg",
"228109/images/image_2_compressed.jpg",
"228109/images/image_3_compressed.jpg",
"228109/images/image_4_compressed.jpg"
] | [
"228109/stls/HulkChickArms.stl"
] | CC-BY | https://www.printables.com/model/228109 | data_0034.tar |
503969 | Strurdy mount for Hadley telescope | <p>This is a completely new mount for <a href="https://www.printables.com/model/268580-hadley-telescope-official-metric-remix">Hadley Telescope</a> that is less shaky than the default printed option. Uses ø12mm or ø12.7mm tubes/rods and M4 metric screws or #10-24 UNC screws.</p><h3>Updates</h3><ul><li>June 13th 2023: R... | [
"mount",
"dobson",
"dobsonian",
"hadley",
"dobsontelescope",
"hadleym4"
] | Learning > Physics & Astronomy | [
"503969/images/image_1_compressed.jpg",
"503969/images/image_2_compressed.jpg",
"503969/images/image_3_compressed.jpg",
"503969/images/image_4_compressed.jpg"
] | [
"503969/stls/Mount - Front Leg R2 12.7 Imperial.stl",
"503969/stls/Mount - Front Leg R2 12.7.stl",
"503969/stls/Mount - Front Leg R2.stl",
"503969/stls/Mount - Front leg.stl",
"503969/stls/Mount - Left Leg R2 12.7 Imperial.stl",
"503969/stls/Mount - Left Leg R2 12.7.stl",
"503969/stls/Mount - Left Leg R... | CC0 | https://www.printables.com/model/503969 | data_0034.tar |
873858 | Struts for Elegoo Neptune 3 Pro | <p>RUS:<br>Настройки печати (на каких печатал я):<br>Сопло 0.4мм, высота слоя 0.2мм, пластик PETG, поддержки нужны.<br>Заполнение 30% гироидное<br>Периметров 3<br>Ширина экструзии периметров 0.6 мм<br>Скорость 80 мм/с<br><br>Что нужно для сборки:<br>1) Винты:<br>М5 х 20 мм - 4 шт.<br>М5 х 40 мм - 4 шт.</p><p>2) Шпильки... | [
"elegoo",
"elegooneptune3pro",
"neptune3pro"
] | 3D Printers > Other Printer Parts & Upgrades | [
"873858/images/image_1_compressed.jpg",
"873858/images/image_2_compressed.jpg",
"873858/images/image_3_compressed.jpg"
] | [
"873858/stls/down_left.stl",
"873858/stls/down_right.stl",
"873858/stls/Neptune 3 pro braces.stl",
"873858/stls/top_left.stl",
"873858/stls/top_right.stl"
] | CC0 | https://www.printables.com/model/873858 | data_0034.tar |
207838 | Stubby coin screwdriver | <p>A stubby screwdriver which holds a coin. Perfect for all consumer electronics were a normal screwdriver isn't suitable.</p><p>Print both parts, laying on the flat side with snug support only on buildplate. After removing the support insert the coin and nuts and screw both halfs together.</p><p>The sub 5 meter ... | [
"tool",
"coin",
"money",
"workshop",
"screwdriver",
"handtool",
"stubby"
] | Hobby & Makers > Tools | [
"207838/images/image_1_compressed.jpg"
] | [
"207838/stls/Stubby_Coin_Screwdriver_AU_1.stl",
"207838/stls/Stubby_Coin_Screwdriver_AU_2.stl",
"207838/stls/Stubby_Coin_Screwdriver_CA_1.stl",
"207838/stls/Stubby_Coin_Screwdriver_CA_2.stl",
"207838/stls/Stubby_Coin_Screwdriver_CZ_1.stl",
"207838/stls/Stubby_Coin_Screwdriver_CZ_2.stl",
"207838/stls/Stu... | CC-BY | https://www.printables.com/model/207838 | data_0034.tar |
496167 | Stubby screwdriver | <p>Not my design, Fusion has McMaster-Carr components that can be inserted. I found this stubby screwdriver there. I removed the shaft and extruded a hex with relieved corners. It is a tight press fit, insert an adapter of your choosing or permanently dedicate a bit to this handle.</p><p>Category: Hand Tools</p> | [
"screw",
"screwdriver",
"thingiverse",
"stubby"
] | Hobby & Makers > Tools | [
"496167/images/image_1_compressed.jpg"
] | [
"496167/stls/stubby_v4.stl"
] | CC0 | https://www.printables.com/model/496167 | data_0034.tar |
201679 | STUBBY SPANNER - 3D Printable Adjustable Wrench |
<p>This is a remake of the fully print-in-place adjustable wrench by Daniel Noree. I was testing printer settings on his wrench and didn't want to wait for the entire thing to print each time (all the important stuff is in the head/claw/mouth - whatever you call that - of the spanner) but I still wanted a nice looki... | [
"thingiverse"
] | Hobby & Makers > Tools | [
"201679/images/image_1_compressed.jpg",
"201679/images/image_2_compressed.jpg",
"201679/images/image_3_compressed.jpg",
"201679/images/image_4_compressed.jpg"
] | [
"201679/stls/STUBBY_SPANNER.stl"
] | CC-BY | https://www.printables.com/model/201679 | data_0034.tar |
127342 | Studio Monitor Stands / Speaker Stands | <p>The printing cost of these should be around 10euro based on the filament price. They are sturdy enough but if you hit the table really hard they will wobble a bit (but wont break or anything) its plastic so this can be expected. </p><p>If I kept the height lower this wouldn't be an issue but I needed to raise t... | [
"speakerstand",
"krk",
"studiomonitor"
] | Gadgets > Audio | [
"127342/images/image_1_compressed.jpg",
"127342/images/image_2_compressed.jpg",
"127342/images/image_3_compressed.jpg",
"127342/images/image_4_compressed.jpg",
"127342/images/image_5_compressed.jpg",
"127342/images/image_6_compressed.jpg",
"127342/images/image_7_compressed.jpg",
"127342/images/image_8... | [
"127342/stls/Base.stl",
"127342/stls/Clamp.stl",
"127342/stls/Screw.stl",
"127342/stls/Tube.stl"
] | CC0 | https://www.printables.com/model/127342 | data_0034.tar |
466542 | Studio Shaker, Threaded | <p>Designed this mostly for fun and because I couldn't find anything else like it. A simple but versatile percussion instrument with a hexagonal pattern grip surface. Depending on what you fill it with, you change the nature of the sound it makes. Anything from sand to seeds to BBs can be used to create a unique sound.... | [
"hexagon",
"hex",
"shaker",
"musicalinstrument",
"instrument",
"percussion"
] | Hobby & Makers > Music | [
"466542/images/image_1_compressed.jpg"
] | [
"466542/stls/Studio Shaker Body Short v1.0.stl",
"466542/stls/Studio Shaker Body v1.0.stl",
"466542/stls/Studio Shaker Cap v1.0.stl",
"466542/stls/Studio Shaker v1.1.stl"
] | CC-BY | https://www.printables.com/model/466542 | data_0034.tar |
987366 | Stuka Ju-87 B2 kit card | <ul><li>can be<strong> printed</strong> together</li></ul><p> </p><ul><li><strong>the model needs to be glued together</strong></li></ul><p> </p><ul><li>or separately in <strong>other colours</strong></li></ul><p> </p><ul><li>can be printed <strong>without support</strong></li></ul><p> </p><ul><li>t... | [
"decoration",
"card",
"fidget",
"model",
"cards",
"kit",
"jumper",
"b2",
"kitcard",
"87",
"junkers",
"stuka",
"ju"
] | Tabletop Miniatures > Vehicles & Machines | [
"987366/images/image_1_compressed.jpg",
"987366/images/image_10_compressed.jpg",
"987366/images/image_11_compressed.jpg",
"987366/images/image_12_compressed.jpg",
"987366/images/image_13_compressed.jpg",
"987366/images/image_14_compressed.jpg",
"987366/images/image_15_compressed.jpg",
"987366/images/i... | [
"987366/stls/Propeller.stl",
"987366/stls/Stuka Ju-87 B2 kit card.stl",
"987366/stls/Stuka Ju-87 B2.stl"
] | CC-BY | https://www.printables.com/model/987366 | data_0034.tar |
507002 | Stupačky na odrážedlo FUNNY WHEELS Rider | <p>Stupačky na odrážadlo Funnywheels rider som navrhoval na situácie, keď sa našej malej nechce šlapať alebo ju ťaháme do kopca. Stupačky možno namontovať do oboch pozícií (hornej i dolnej diery) na prednej vidlici.</p><p>Zoznam použitého materiálu:</p><ul><li>2x nábytkový spojovač M6 - použije sa len maticová časť &nb... | [] | Toys & Games > Vehicles | [
"507002/images/image_1_compressed.jpg",
"507002/images/image_2_compressed.jpg",
"507002/images/image_3_compressed.jpg",
"507002/images/image_4_compressed.jpg",
"507002/images/image_5_compressed.jpg"
] | [
"507002/stls/Funnywheels_peggy.stl"
] | GPL3.0 | https://www.printables.com/model/507002 | data_0034.tar |
521068 | Sturdy 2040/4040 Extrusion Angle Bracket | <p>In the process of ‘ruggedizing’ my Ender 3 I realised I was going to need some wickedly strong brackets to keep it stiff and square.</p><p>Not finding anything that really looked the way I liked, and inspired by <a href="https://www.amazon.com.au/Iverntech-Bracket-Aluminium-Extrusion-Brackets/dp/B0B56VNRGG">these</a... | [
"frame",
"extrusion",
"bracket",
"angle",
"corner",
"aluminium",
"2040",
"4040"
] | 3D Printers > Other Printer Parts & Upgrades | [
"521068/images/image_1_compressed.jpg",
"521068/images/image_2_compressed.jpg",
"521068/images/image_3_compressed.jpg"
] | [
"521068/stls/2040-4040 Angle Bracket.stl"
] | CC-BY | https://www.printables.com/model/521068 | data_0034.tar |
381349 | Sturdy Automatic Chook Water Bowl (Chicken Waterer) | <p>Remix of ‘Chicken waterer using PET bottle’ by kkwsiu adding a sturdier base and elevated water level.</p><p> </p><p>Our delightful and hilarious rescue chook Harriet has anarchistic tendencies when it comes to her love of knocking/tipping/pushing things over (just to see what happens :p). So the intended outco... | [
"waterbowl",
"chickendrinkingbowl",
"automaticwaterbowl",
"birdwaterbowl",
"chickenwaterer",
"chookwater"
] | Household > Pets | [
"381349/images/image_1_compressed.jpg",
"381349/images/image_2_compressed.jpg",
"381349/images/image_3_compressed.jpg",
"381349/images/image_4_compressed.jpg"
] | [
"381349/stls/Sturdy_Automatic_Chicken_Water_Bowl_with_20mm_water_level.stl",
"381349/stls/Sturdy_Automatic_Chicken_Water_Bowl_with_28mm_water_level.stl"
] | CC-BY | https://www.printables.com/model/381349 | data_0034.tar |
580505 | Sturdy Curvy Soap Box | <p>A sturdy soap box which makes use of a fun curvy shape to create raised interior rails for the soap to sit on for <strong>quicker drying</strong>, and includes a strong built-in latch to help secure the case closed when you're ready to travel. <strong>Three sizes</strong> are provided to accommodate bars of so... | [
"printinplace",
"soap",
"latch",
"travel",
"soapholder",
"soapdish",
"hinged",
"hingedmodel",
"travelcase",
"soaptray",
"soapbox",
"soapdishholder",
"hingedbox",
"latching",
"travelbox",
"travelsoaptray",
"soapbar",
"soapcase",
"printinplacehinge",
"latched",
"printinplacebox... | Household > Bathroom | [
"580505/images/image_1_compressed.jpg",
"580505/images/image_2_compressed.jpg",
"580505/images/image_3_compressed.jpg",
"580505/images/image_4_compressed.jpg",
"580505/images/image_5_compressed.jpg",
"580505/images/image_6_compressed.jpg",
"580505/images/image_7_compressed.jpg",
"580505/images/image_8... | [
"580505/stls/Soap Case - Large.stl",
"580505/stls/Soap Case - Medium.stl",
"580505/stls/Soap Case - Small.stl"
] | CC-BY | https://www.printables.com/model/580505 | data_0034.tar |
1030192 | Sturdy desiccant cup for filament dry box with rollers, works with .6 nozzles, less retracts and z-hops V2; | <p>Model resized to exactely match the original. Thanks for pointing this out (Jeff Noxon)</p><p>For best results, set the z-hop to 0, set seam position to nearest and use Arachne wall generator.</p><p>Print time with my Sovol SV08 under 15min</p><p>Also works with .6 nozzels! (use arachne!)</p><p>Had a lot of fun desi... | [] | 3D Printers > Accessories | [
"1030192/images/image_1_compressed.jpg"
] | [
"1030192/stls/Desiccant_cup_v2(small).stl",
"1030192/stls/Desiccant_cup_v2_resized.stl"
] | CC-BY | https://www.printables.com/model/1030192 | data_0034.tar |
88525 | Sturdy Infinity Cube | <p>Infinity cube with strong hinges that won't break easily. This cube is designed with a lot of slack, so that it moves freely.</p><p>I designed this after having several fails with other models, where the hinges would break when trying to loosen them after printing. Hopefully, this design will print well for everyone... | [
"toy",
"3dprinting",
"fidgettoy",
"openscad",
"thingiverse",
"infinitycube"
] | Toys & Games > Other Toys & Games | [
"88525/images/image_1_compressed.jpg",
"88525/images/image_2_compressed.jpg",
"88525/images/image_3_compressed.jpg"
] | [
"88525/stls/sturdy-infinity-cube-16.stl",
"88525/stls/sturdy-infinity-cube-20 (default size).stl",
"88525/stls/sturdy-infinity-cube-24.stl",
"88525/stls/sturdy-infinity-cube-30.stl",
"88525/stls/sturdy-infinity-cube-36.stl"
] | CC-BY | https://www.printables.com/model/88525 | data_0034.tar |
1385128 | Sturdy Stackable Storage Tray | <p>Easy print, no supports required.</p> | [
"box",
"easytoprint",
"stackable",
"storage",
"storagebox",
"tray",
"sturdy",
"nosupport",
"easyprint",
"stackablecontainer",
"nosupports"
] | Hobby & Makers > Organizers | [
"1385128/images/image_1_compressed.jpg",
"1385128/images/image_2_compressed.jpg"
] | [
"1385128/stls/StackableTray.stl"
] | CC-BY | https://www.printables.com/model/1385128 | data_0034.tar |
283891 | Sturdy vase-mode screw container (variable height) | <p><strong>Designed for 0.4mm nozzle with extrusion width set to 0.6mm. </strong>See below for other settings.</p><p>This container is quite rigid for a vase mode print, partly because having double walls, partly due to the thread pattern, and partly because of the 0.6mm extrusion width (standard is 0.45mm for a 0.4mm ... | [
"container",
"fidget",
"vasemode",
"screwcap"
] | Hobby & Makers > Organizers | [
"283891/images/image_1_compressed.jpg",
"283891/images/image_2_compressed.jpg",
"283891/images/image_3_compressed.jpg",
"283891/images/image_4_compressed.jpg"
] | [
"283891/stls/vase_screw_bottom_100_100.stl",
"283891/stls/vase_screw_bottom_100_20.stl",
"283891/stls/vase_screw_bottom_100_40.stl",
"283891/stls/vase_screw_bottom_100_60.stl",
"283891/stls/vase_screw_bottom_100_80.stl",
"283891/stls/vase_screw_bottom_20_100.stl",
"283891/stls/vase_screw_bottom_20_20.st... | CC-BY | https://www.printables.com/model/283891 | data_0034.tar |
862859 | Stylish BTT Octopus / Octopus Pro Fancase | <p>This is a remix of the awesome looking <a href="https://github.com/Ramalama2/Voron-2-Mods/tree/main/Octopus_Pro_FanCase">OctoGlasses </a>from Ramalama2 which fixes some issues in the original design. </p><h4>Design </h4><figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://med... | [
"3d",
"octopus",
"case",
"printer",
"board",
"fan",
"cooling",
"voron",
"octopuspro"
] | 3D Printers > Voron Parts & Upgrades | [
"862859/images/image_1_compressed.jpg",
"862859/images/image_2_compressed.jpg",
"862859/images/image_3_compressed.jpg",
"862859/images/image_4_compressed.jpg",
"862859/images/image_5_compressed.jpg"
] | [
"862859/stls/Bottom_Mount.stl",
"862859/stls/Octopus Pro - FanCase - Bottom.stl",
"862859/stls/Octopus Pro - FanCase - Middle.stl",
"862859/stls/Octopus Pro - FanCase - Top.stl",
"862859/stls/Stiffer_DinMount_M3_insert.stl"
] | GPL3.0 | https://www.printables.com/model/862859 | data_0034.tar |
245852 | Stylish Headphones Stand |
<p>A stylish headphones stand, with built-in cable storage.</p>
<p>This design is*<strong>completely free</strong>* and shared under a permissive license. Your <a href="https://codeandmake.com/support">support</a> is hugely appreciated.</p>
<h3>Did you know?</h3>
<p>Some of our designs cannot be found on Thingiverse... | [
"thingiverse"
] | Gadgets > Audio | [
"245852/images/image_1_compressed.jpg",
"245852/images/image_10_compressed.jpg",
"245852/images/image_2_compressed.jpg",
"245852/images/image_3_compressed.jpg",
"245852/images/image_4_compressed.jpg",
"245852/images/image_5_compressed.jpg",
"245852/images/image_6_compressed.jpg",
"245852/images/image_... | [
"245852/stls/codeandmake.com_Stylish_Headphones_Stand_v1.0.stl"
] | CC-BY | https://www.printables.com/model/245852 | data_0034.tar |
165516 | Stylish Ticwatch Pro 3 stand | <p>A stylish remix of a Ticwatch Pro 3 stand - The model is separated into 3 models for easier print with minimum support and allows you to print it with two different colors. A wider Base with the company's logo. I provided only STL files so anyone can decide how and what material to use for print. </p><p> ... | [
"stand",
"smartwatch",
"ticwatchpro"
] | 3D Printers > Accessories | [
"165516/images/image_1_compressed.jpg",
"165516/images/image_2_compressed.jpg"
] | [
"165516/stls/Ticwatch Base.stl",
"165516/stls/Ticwatch Stand.stl",
"165516/stls/Ticwatch Top.stl"
] | CC-BY | https://www.printables.com/model/165516 | data_0034.tar |
460421 | Stylish, modern Fruit Bowl | <p>Designed in collaboration with <a href="https://www.printables.com/@mani_278854">https://www.printables.com/@mani_278854 </a>this is a modern fruit bowl that can be printed as separate parts and then assembled by hand. </p><p> </p><figure class="table" style="height:332.25px;width:714px;"><table style="bo... | [
"kitchen",
"display",
"design",
"bowl",
"fruit",
"storage",
"minimalist",
"modern",
"fruits",
"room",
"simple",
"kitchenorganizer",
"minimalistic",
"stylish",
"style",
"living",
"moderndesign",
"fruitbowl",
"ribbed",
"ribs"
] | Household > Kitchen | [
"460421/images/image_1_compressed.jpg",
"460421/images/image_2_compressed.jpg",
"460421/images/image_3_compressed.jpg",
"460421/images/image_4_compressed.jpg",
"460421/images/image_5_compressed.jpg",
"460421/images/image_6_compressed.jpg",
"460421/images/image_7_compressed.jpg"
] | [
"460421/stls/arm-part.stl",
"460421/stls/base-part.stl"
] | CC-BY | https://www.printables.com/model/460421 | data_0034.tar |
168971 | Stylized & multi-color rabbit ears head for LUCKY 13 | <p>Yet another head for soozafone's fantastic LUCKY 13 model! This is just some modifications/improvements to BaGooN's also-great rabbit ears head. (Personally, I think it looks like a robot, but maybe that's just because I like robots.)</p><p>I noticed that, particularly when scaled up, the rabbit ears head didn't qui... | [
"toy",
"head",
"robot",
"balljoint",
"jointed"
] | Toys & Games > Action Figures & Statues | [
"168971/images/image_1_compressed.jpg",
"168971/images/image_2_compressed.jpg"
] | [
"168971/stls/head-dual-color.stl",
"168971/stls/head-mmu.stl",
"168971/stls/head-single-color.stl"
] | CC-BY | https://www.printables.com/model/168971 | data_0034.tar |
230058 | stylized dinosaur model | <p>this is an easy to print, highly stylized dinosaur figurine/toy. not based on any particular real dinosaur!</p> | [
"dinosaur"
] | Toys & Games > Action Figures & Statues | [
"230058/images/image_1_compressed.jpg"
] | [
"230058/stls/cute dinosaur.stl"
] | CC0 | https://www.printables.com/model/230058 | data_0034.tar |
306913 | Stylus pen (for boogie board) |
<p>Comfy stylus, made for boogie boards, but prolly useful for any tablet devices? Includes configurable freecad file.</p>
<h3>Print Settings</h3>
<p><strong>Notes:</strong></p>
<p>Vase mode recommended (printed in one go with a spiral)</p>
Category: Tablet
| [
"thingiverse",
"stylus",
"styluspen",
"boogieboard"
] | Gadgets > Portable Devices | [
"306913/images/image_1_compressed.jpg"
] | [
"306913/stls/stylus.stl"
] | CC-BY | https://www.printables.com/model/306913 | data_0034.tar |
27193 | Stylus/Apple Pencil Holder | <p>Somewhere to put your stylus when you want to do something else. Slim and minimalist design fits easily on desks. Especially useful for me during math class when I pick up and put down my stylus a lot, as we use OneNote to keep track of classwork. I've included files for the Apple Pencil, the Lenovo ThinkPad X390 st... | [
"stylus",
"applepencil"
] | Household > Office | [
"27193/images/image_1_compressed.jpg",
"27193/images/image_2_compressed.jpg"
] | [
"27193/stls/for-apple-pencil.stl",
"27193/stls/for-lenovo-thinkpad-x390.stl",
"27193/stls/for-others.stl"
] | CC-BY | https://www.printables.com/model/27193 | data_0034.tar |
666941 | Ständer für Snowglobe Votive Ornament | <p>einfach zu drucken ohne stützen. der fuß hat einen 0,2mm größeres loch als der bogen. sollte also sehr gut passen. bischen kleber rein und kontrollieren ob der bogen senkrecht steht. </p><p>der bogen hat oben ein 3mm runden stab. da passt das Ornament gut rein. es hält auch das gewicht. ist ja immerhin nur deko... | [] | Household > Home Decor | [
"666941/images/image_1_compressed.jpg",
"666941/images/image_2_compressed.jpg",
"666941/images/image_3_compressed.jpg"
] | [
"666941/stls/bogen.stl",
"666941/stls/fuss.stl"
] | CC0 | https://www.printables.com/model/666941 | data_0034.tar |
166900 | Stålokk til Idun Ketchup og Sennep (Standing Lid for Idun Ketchup) |
<p>I designed this snap-on gadget for Norwegian (Idun) ketchup and mustard bottles earlier this summer. I use this snap-on lid a lot and it makes it so much easier to balance the bottles on its head so I can easily use all of the contents. It also makes it easier to remove the lid.</p>
<p><a href="https://www.instag... | [
"thingiverse",
"ketchup",
"norwegian",
"idun",
"norsk",
"sennep"
] | Household > Kitchen | [
"166900/images/image_1_compressed.jpg",
"166900/images/image_2_compressed.jpg",
"166900/images/image_3_compressed.jpg",
"166900/images/image_4_compressed.jpg",
"166900/images/image_5_compressed.jpg",
"166900/images/image_6_compressed.jpg"
] | [
"166900/stls/Ketchup_Jig.stl"
] | CC-BY | https://www.printables.com/model/166900 | data_0034.tar |
689210 | Stěrka na mazivo / Lube helper | <p>Dva různé rozměry podle hlazené tyče</p> | [
"service",
"mazani",
"pomucka",
"tyc",
"sroubeni",
"tuk"
] | 3D Printers > Accessories | [
"689210/images/image_1_compressed.jpg",
"689210/images/image_2_compressed.jpg",
"689210/images/image_3_compressed.jpg"
] | [
"689210/stls/Stěrka na mazivo.stl"
] | CC0 | https://www.printables.com/model/689210 | data_0034.tar |
485508 | Sub Benchy | <p>This came about during a live stream of Fun King 3D, the subject of Benchy's came up and everyone started mentioning the different iterations of Benchy's and I noticed I had never seen a Submarine Benchy!</p>
<p>Not wanting to just do a remix by taking the cabin and putting it on a submarine, took the original conce... | [
"benchy",
"3dbenchy",
"sub",
"submarine"
] | Toys & Games > Vehicles | [
"485508/images/image_1_compressed.jpg",
"485508/images/image_2_compressed.jpg",
"485508/images/image_3_compressed.jpg",
"485508/images/image_4_compressed.jpg",
"485508/images/image_5_compressed.jpg",
"485508/images/image_6_compressed.jpg",
"485508/images/image_7_compressed.jpg",
"485508/images/image_8... | [
"485508/stls/SUB_BENCHY_v12.stl",
"485508/stls/SUB_BENCHY_v9.stl"
] | CC-BY | https://www.printables.com/model/485508 | data_0034.tar |
151028 | Subnautica Survival Knife - 4 Colors | <p>Use this blueprint in your fabricator, along with 1 unit of silicone rubber and 1 unit of titanium.</p><p>But seriously...</p><p>Print one half and then mirror it and print the other half. Each half is split into 4 pieces, so you can print it with the Mosaic Palette or the Prusa MMU. You can also print the pieces se... | [
"cosplayprop",
"subnautica"
] | Costumes & Accessories > Props | [
"151028/images/image_1_compressed.jpg",
"151028/images/image_2_compressed.jpg"
] | [
"151028/stls/Blade.stl",
"151028/stls/Grip.stl",
"151028/stls/Handle.stl",
"151028/stls/Mirror Blade.stl",
"151028/stls/Mirror Grip.stl",
"151028/stls/Mirror Handle.stl",
"151028/stls/Mirror Ring.stl",
"151028/stls/Ring.stl"
] | CC-BY | https://www.printables.com/model/151028 | data_0034.tar |
74524 | Succubus Updated | <p>Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: <a href="https://www.patreon.com/mz4250">https://www.patreon.com/mz4250</a></p><p>Patrons have access to all my files in one place, a request board, as well a... | [
"devil",
"succubus"
] | Toys & Games > Board Games | [
"74524/images/image_1_compressed.jpg"
] | [
"74524/stls/Succubus Updated presupported.stl",
"74524/stls/Succubus Updated.stl"
] | CC-BY | https://www.printables.com/model/74524 | data_0034.tar |
856197 | succulent | [
"plant",
"succulent",
"fake",
"fakeplant"
] | Household > Home Decor | [
"856197/images/image_1_compressed.jpg",
"856197/images/image_2_compressed.jpg",
"856197/images/image_3_compressed.jpg",
"856197/images/image_4_compressed.jpg",
"856197/images/image_5_compressed.jpg",
"856197/images/image_6_compressed.jpg"
] | [
"856197/stls/cuvarkuce.stl"
] | CC0 | https://www.printables.com/model/856197 | data_0034.tar | |
418123 | Succulent Plant Pot - parametric | <p>This pot is based on "<a href="https://www.printables.com/de/model/98588-succulent-planter-pot">Succulent Planter Pot</a>" from <a href="https://www.printables.com/de/social/161865-layers-studio">Layers Studio</a>.</p><p>I parametrized the model and made the stand in two parts so that it can be printed without suppo... | [
"pot",
"decoration",
"plant",
"succulent",
"garden",
"plantpot",
"planterpot",
"japan",
"succulents",
"succulentplant",
"succulentpot",
"succulentplanter"
] | Household > Home Decor | [
"418123/images/image_1_compressed.jpg"
] | [
"418123/stls/Pot - 36 mm.stl",
"418123/stls/Saucer.stl",
"418123/stls/Stand.stl"
] | GPL2.0 | https://www.printables.com/model/418123 | data_0034.tar |
49292 | Succulent Plant Pot / Planter "Arnold" | <p>***<br><strong>New collection of 8 plant pots</strong> - <a href="https://www.printables.com/model/127174-plant-pot-collection">https://www.prusaprinters.org/prints/127174-plant-pot-collection</a><br>***</p><p>The "Arnold" plant pot / planter is 7cm in diameter and 6cm in height.</p><p>The design is a solid shape, g... | [] | Household > Home Decor | [
"49292/images/image_1_compressed.jpg",
"49292/images/image_2_compressed.jpg",
"49292/images/image_3_compressed.jpg"
] | [
"49292/stls/arnold.stl"
] | CC-BY | https://www.printables.com/model/49292 | data_0034.tar |
49300 | Succulent Plant Pot / Planter "Barry" | <p>***<br><strong>New collection of 8 plant pots</strong> - <a href="https://www.printables.com/model/127174-plant-pot-collection">https://www.prusaprinters.org/prints/127174-plant-pot-collection</a><br>***</p><p>The "Barry" plant pot / planter is 7cm in diameter and 6cm in height.</p><p>The design is a solid shape, gi... | [
"planter",
"succulents",
"succulentpot",
"succulentplanter"
] | Household > Home Decor | [
"49300/images/image_1_compressed.jpg"
] | [
"49300/stls/barry.stl"
] | CC-BY | https://www.printables.com/model/49300 | data_0034.tar |
49382 | Succulent Plant Pot / Planter "Clara" | <p>***<br><strong>New collection of 8 plant pots</strong> - <a href="https://www.printables.com/model/127174-plant-pot-collection">https://www.prusaprinters.org/prints/127174-plant-pot-collection</a><br>***</p><p>The "Clara" plant pot / planter is 7cm in diameter and 6cm in height.</p><p>The design is a solid shape, gi... | [
"planter",
"succulents",
"succulentpot",
"succulentplanter"
] | Household > Home Decor | [
"49382/images/image_1_compressed.jpg",
"49382/images/image_2_compressed.jpg"
] | [
"49382/stls/clara.stl"
] | CC-BY | https://www.printables.com/model/49382 | data_0034.tar |
50205 | Succulent Plant Pot / Planter "Florence" | <p>***<br><strong>New collection of 8 plant pots</strong> - <a href="https://www.printables.com/model/127174-plant-pot-collection">https://www.prusaprinters.org/prints/127174-plant-pot-collection</a><br>***</p><p>The "Florence" plant pot / planter is 7cm in diameter and 6cm in height.</p><p>The design is a solid shape,... | [
"planter",
"succulents"
] | Household > Home Decor | [
"50205/images/image_1_compressed.jpg",
"50205/images/image_2_compressed.jpg"
] | [
"50205/stls/florence.stl"
] | CC-BY | https://www.printables.com/model/50205 | data_0034.tar |
98588 | Succulent Planter Pot | <p>A small planter pot for Ikea succulents. Available with 2 leg options (short and tall).</p> | [
"pot",
"planter",
"succulent",
"japanese",
"succulentpot"
] | Household > Home Decor | [
"98588/images/image_1_compressed.jpg",
"98588/images/image_2_compressed.jpg"
] | [
"98588/stls/Pot.stl",
"98588/stls/Stand.stl",
"98588/stls/Stand_tall.stl"
] | GPL2.0 | https://www.printables.com/model/98588 | data_0034.tar |
4078 | Suculent Planter / Maceta para Suculentas | <p>Este modelado NO me pertenece, las licencias de Creative Commons - Attribution - Non-Commercial bajo el nombre de CGPena, <a href="https://www.thingiverse.com/cgpena/about">https://www.thingiverse.com/cgpena/about</a>.</p>
<hr/>
<p>This is NOT my model, licensed under the Creative Commons - Attribution - Non-Commerc... | [
"planter",
"suculent",
"maceta"
] | Household > Home Decor | [
"4078/images/image_1_compressed.jpg",
"4078/images/image_2_compressed.jpg",
"4078/images/image_3_compressed.jpg"
] | [
"4078/stls/p11.stl",
"4078/stls/p3.stl",
"4078/stls/p6.stl",
"4078/stls/p7.stl"
] | CC0 | https://www.printables.com/model/4078 | data_0034.tar |
28295 | Sugar dispenser | <p>This sugar dispenser dispenses teaspoon-sized doses of sugar by rotating the knob. The reservoir contains about 60 grams of sugar, enough for plenty cups of tea!</p>
<h3>Print instructions</h3><p>Print at 0.15mm layer height for best fit of threaded parts. Use a coin to assemble the 'dispenser_screw_v1'.</p> | [
"cup",
"container",
"sugar",
"dispenser",
"measuring"
] | Household > Living Room | [
"28295/images/image_1_compressed.jpg",
"28295/images/image_2_compressed.jpg",
"28295/images/image_3_compressed.jpg",
"28295/images/image_4_compressed.jpg"
] | [
"28295/stls/dispenser_body_v3.stl",
"28295/stls/dispenser_hopper_v2.stl",
"28295/stls/dispenser_knob_v2.stl",
"28295/stls/dispenser_lid_v2.stl",
"28295/stls/dispenser_screw_v1.stl",
"28295/stls/dispenser_wheel_v1.stl"
] | CC0 | https://www.printables.com/model/28295 | data_0034.tar |
98445 | Sugar Pot | <p>A simple Sugar Pot design with room for the spoon.</p> | [
"kitchen",
"pot",
"sugar",
"organisation"
] | Household > Kitchen | [
"98445/images/image_1_compressed.jpg"
] | [
"98445/stls/Lid.stl",
"98445/stls/Pot.stl"
] | GPL2.0 | https://www.printables.com/model/98445 | data_0034.tar |
2454 | Sugar Scoop | <p>My mother had a wooden sugar shovel and my sister also wanted one of that size. My father then said he would like to have "one number" smaller.<br>So I took my calipers, took some measurements and created a quick model in Fusion 360. Nothing fancy but it should be close to the original. Because I did not know what "... | [
"fusion360",
"scoop",
"coffee",
"sugar",
"scooper",
"serving",
"coffescoop",
"powdermeasure",
"powder",
"spoon"
] | Household > Kitchen | [
"2454/images/image_1_compressed.jpg",
"2454/images/image_2_compressed.jpg",
"2454/images/image_3_compressed.jpg"
] | [
"2454/stls/high_sugarscoop01.stl",
"2454/stls/high_sugarscoop02.stl",
"2454/stls/high_sugarscoop03.stl",
"2454/stls/sugarscoop01.stl",
"2454/stls/sugarscoop02.stl",
"2454/stls/sugarscoop03.stl"
] | CC-BY | https://www.printables.com/model/2454 | data_0034.tar |
33549 | Sugar Skull with a Solid Base | <p>Ironically I needed something with a solid base, so this is just the same thing with a solid base layer and some cutouts to let light through for decoration.</p>
<p>Photo used courtesy Travis Elijah, all photo rights reside with him, thank you Travis for the use of the photo!</p>
<h3>Print instructions</h3><p>Unasso... | [
"skull",
"art",
"america",
"sugar",
"mexican",
"thingiverse",
"diadeslosmuertos",
"diadelosmuertes",
"latin",
"mexico"
] | Art & Design > Wall-mounted | [
"33549/images/image_1_compressed.jpg",
"33549/images/image_2_compressed.jpg"
] | [
"33549/stls/sugar_skull2.stl"
] | CC-BY | https://www.printables.com/model/33549 | data_0034.tar |
609039 | Sukuna's finger | His Index Finger | Download free 3D printable STL models | [] | Costumes & Accessories > Props | [
"609039/images/image_1_compressed.jpg",
"609039/images/image_2_compressed.jpg"
] | [
"609039/stls/SukunaFinger.stl"
] | CC0 | https://www.printables.com/model/609039 | data_0034.tar |
68159 | Sun Clock | <p>This clock was made to fit clockworks like the one shown on the image uploaded. I'm not sure if it is sold in other countries, but I think it is a default size (56mm x 56mm x 18mm, approx.)</p><p>Maybe you will have to trim the main hands to fit the clock size.</p> | [
"clock",
"time",
"hour",
"wallclock"
] | Art & Design > Wall-mounted | [
"68159/images/image_1_compressed.jpg",
"68159/images/image_2_compressed.jpg",
"68159/images/image_3_compressed.jpg"
] | [
"68159/stls/body.stl",
"68159/stls/core.stl",
"68159/stls/numbers.stl"
] | CC-BY | https://www.printables.com/model/68159 | data_0034.tar |
414389 | Sun Flower | <p>It’s Spring, so my wife wanted some 3D printed flowers to add to a painting for a family member in the hospital. I modeled one up in Fusion 360, and sliced and printed it at a few different sizes in black, yellow, and orange - but feel free to go hog wild with other colors. I designed the center to look like a sunfl... | [
"flower",
"magnet",
"spring",
"sunflower"
] | Seasonal designs > Spring & Easter | [
"414389/images/image_1_compressed.jpg",
"414389/images/image_2_compressed.jpg",
"414389/images/image_3_compressed.jpg",
"414389/images/image_4_compressed.jpg",
"414389/images/image_5_compressed.jpg"
] | [
"414389/stls/SunFlower.stl"
] | CC0 | https://www.printables.com/model/414389 | data_0034.tar |
105693 | Sun Hat for articulated Snowman | <p>Created this hat for snow woman version of the articulated snowman</p> | [] | Seasonal designs > Winter & Christmas & New Year's | [
"105693/images/image_1_compressed.jpg",
"105693/images/image_2_compressed.jpg"
] | [
"105693/stls/Sun Hat.stl"
] | CC-BY | https://www.printables.com/model/105693 | data_0034.tar |
13456 | Sunflower (Plants vs Zombies) | <p>Watch here: <a href="https://youtu.be/39pGLfgecXs">https://youtu.be/39pGLfgecXs</a></p>
<p>It's finally time we add another model to our Plants vs Zombies shelf. Citron and Peashooter were getting lonely, so I created the Sunflower to keep them company.</p>
<p>I created the model in ZBrush. I started by shaping the ... | [
"character",
"plant",
"sla",
"fun",
"sunflower",
"resin",
"thingiverse",
"dlp"
] | Toys & Games > Action Figures & Statues | [
"13456/images/image_1_compressed.jpg",
"13456/images/image_2_compressed.jpg",
"13456/images/image_3_compressed.jpg",
"13456/images/image_4_compressed.jpg",
"13456/images/image_5_compressed.jpg"
] | [
"13456/stls/sunflower.stl"
] | CC-BY | https://www.printables.com/model/13456 | data_0034.tar |
139898 | Sunflower (Print Flat) | <p>The petals for this sunflower are printed flat and can be shaped after printing with a little heat.</p><p>The sunflower is the national flower of Ukraine.</p><figure class="media"><oembed url="https://youtu.be/PvxHaFnjXZA"></oembed></figure><p><a href="https://youtu.be/PvxHaFnjXZA">https://youtu.be/PvxHaFnjXZA</a></... | [
"flower",
"heart",
"sunflower",
"peace"
] | Household > Home Decor | [
"139898/images/image_1_compressed.jpg"
] | [
"139898/stls/Base.stl",
"139898/stls/Face with Heart.stl",
"139898/stls/Face.stl",
"139898/stls/Petals.stl",
"139898/stls/Stem 1.stl",
"139898/stls/Stem 2.stl",
"139898/stls/Stem 3.stl",
"139898/stls/Sunflower v5.stl"
] | CC-BY | https://www.printables.com/model/139898 | data_0034.tar |
180759 | Sunflower Button |
<p>You can print this as one color. I have also included two files that can be merged together if you want to print the center of the sunflower in a different color like I did.</p>
Category: Accessories
| [
"button",
"sunflower",
"thingiverse",
"dualextrusion"
] | Fashion > Other Fashion Accessories | [
"180759/images/image_1_compressed.jpg",
"180759/images/image_2_compressed.jpg",
"180759/images/image_3_compressed.jpg",
"180759/images/image_4_compressed.jpg"
] | [
"180759/stls/Sunflower_Button_01.stl",
"180759/stls/Sunflower_Button_Bottom.stl",
"180759/stls/Sunflower_Button_Top.stl"
] | CC-BY | https://www.printables.com/model/180759 | data_0034.tar |
68389 | Sunflower Clock | <p>Printed in PETG in various colors , some parts 0.3mm layer to reduce time ,hands 0.2mm layer, all parts without supports .</p><p>The link between petals are printed using Tansparent Petg , needed to avoid petal movements</p><p><strong>The total width of the clock is about 70cm</strong></p><p><strong>The total print ... | [] | Art & Design > Wall-mounted | [
"68389/images/image_1_compressed.jpg",
"68389/images/image_2_compressed.jpg",
"68389/images/image_3_compressed.jpg",
"68389/images/image_4_compressed.jpg"
] | [
"68389/stls/clock_body.stl",
"68389/stls/hour_hand.stl",
"68389/stls/hour_placeholder.stl",
"68389/stls/link.stl",
"68389/stls/minutes_hand.stl",
"68389/stls/petal.stl"
] | CC0 | https://www.printables.com/model/68389 | data_0034.tar |
447996 | Sunglasses | <p>
<figure class="media">
<oembed url="https://www.youtube.com/watch?v=6BiOeYH0kh8"></oembed>
</figure>
</p>
<p>Imprime tus propias gafas de sol.</p>
<p>Yo he utilizado los cristales de unas "Knockarround" rotas.</p>
Category: Glasses | [
"fashion",
"sunglasses",
"sun",
"summer",
"thingiverse",
"gafasdesol"
] | Fashion > Other Fashion Accessories | [
"447996/images/image_1_compressed.jpg",
"447996/images/image_2_compressed.jpg",
"447996/images/image_3_compressed.jpg",
"447996/images/image_4_compressed.jpg",
"447996/images/image_5_compressed.jpg",
"447996/images/image_6_compressed.jpg"
] | [
"447996/stls/Montura.stl",
"447996/stls/Patillas.stl"
] | CC-BY | https://www.printables.com/model/447996 | data_0034.tar |
220058 | Sunglasses Car Visor Clip | <h4>Introducing my latest 3D model: a clip that attaches your sunglasses to your car's sunvisor, keeping them within easy reach. This easy-to-print accessory is designed for quick assembly and installation, adding a touch of convenience to your driving experience. Never lose track of your sunglasses again! 😎🚗✨</h4><h... | [
"holder",
"car",
"sunglasses",
"sun",
"glasses",
"thingiverse",
"sunglassesholder",
"visor",
"sunglassesclip",
"rayban"
] | Hobby & Makers > Automotive | [
"220058/images/image_1_compressed.jpg",
"220058/images/image_2_compressed.jpg"
] | [
"220058/stls/sunglasses-car-clip.stl"
] | CC-BY | https://www.printables.com/model/220058 | data_0034.tar |
220054 | Sunglasses Car Visor Clip V2 | <h4>Introducing my latest 3D model: a clip that attaches your sunglasses to your car's sunvisor, keeping them within easy reach. This easy-to-print accessory is designed for quick assembly and installation, adding a touch of convenience to your driving experience. Never lose track of your sunglasses again! 😎🚗✨</h4><h... | [
"car",
"sunglasses",
"thingiverse",
"sunglassesholder",
"sunglassesclip"
] | Household > Office | [
"220054/images/image_1_compressed.jpg",
"220054/images/image_2_compressed.jpg",
"220054/images/image_3_compressed.jpg"
] | [
"220054/stls/sunglass-car-clip-v2-nolettering.stl",
"220054/stls/sunglass-car-clip-v2.stl"
] | CC-BY | https://www.printables.com/model/220054 | data_0034.tar |
19752 | Sunglasses clip | <p>The original design was slippery in my car so I added Teeth so it can grip to my visor.</p>
<h3>Print instructions</h3><h3>Category: Glasses Print Settings</h3>
<p><strong>Printer Brand:</strong> Prusa</p>
<p><strong>Printer:</strong> <a href="http://amzn.to/2rqZ6Uo">i3 MK3</a></p>
<p><strong>Rafts:</strong> No</p>
... | [
"holder",
"hanger",
"car",
"sunglasses",
"organization",
"thingiverse"
] | Hobby & Makers > Organizers | [
"19752/images/image_1_compressed.jpg",
"19752/images/image_2_compressed.jpg"
] | [
"19752/stls/sunglass_clip.stl"
] | CC-BY | https://www.printables.com/model/19752 | data_0034.tar |
335775 | Sunglasses Holder (REMIX) | One of the many remixes I came across on Thingiverse. | Download free 3D printable STL models | [
"car",
"sunglasses",
"sunglassesholder"
] | Gadgets > Other Gadgets | [
"335775/images/image_1_compressed.jpg",
"335775/images/image_2_compressed.jpg",
"335775/images/image_3_compressed.jpg"
] | [
"335775/stls/sunglasses_v3_noname.stl"
] | CC0 | https://www.printables.com/model/335775 | data_0034.tar |
1407760 | Sunglasses holder for sun visor in car | <p>Simple sunglasses holder for sunvisor in car, printed with The Filament HT-PLA to prevent deformation in the sun.</p> | [
"holder",
"car",
"sunglasses",
"glasses",
"visor",
"sunvisor"
] | Hobby & Makers > Automotive | [
"1407760/images/image_1_compressed.jpg",
"1407760/images/image_2_compressed.jpg",
"1407760/images/image_3_compressed.jpg",
"1407760/images/image_4_compressed.jpg"
] | [
"1407760/stls/Uchwyt na okulary.stl"
] | CC0 | https://www.printables.com/model/1407760 | data_0034.tar |
551796 | Sunglasses holder for Tesla Model 3 or Y | <p>Sunglasses holder for Tesla Model 3 or Y.<br><br>Print in PETG so it can withstand high temperatures inside a car. </p> | [
"sunglasses",
"tesla",
"model3",
"sunglassholder"
] | Hobby & Makers > Automotive | [
"551796/images/image_1_compressed.jpg"
] | [
"551796/stls/GlassesHolderTesla.stl"
] | BSD | https://www.printables.com/model/551796 | data_0034.tar |
428338 | Sunglasses Stand | <p>Remix of G2bb's Universal 4x Glasses Stand with a beefier base/back. This is also shortened to hold 3 pairs of glasses.<br><br>The <a href="https://www.thingiverse.com/thing:1264885">original model</a> was a 3x glasses stand from Thingiverse, so I think we've now gone full circle.</p> | [
"holder",
"stand",
"sunglasses",
"organization",
"glasses"
] | Hobby & Makers > Organizers | [
"428338/images/image_1_compressed.jpg"
] | [
"428338/stls/Sunglasses_Stand.stl"
] | CC-BY | https://www.printables.com/model/428338 | data_0034.tar |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.