model_id stringlengths 1 7 | name stringlengths 2 210 | description stringlengths 0 253k | tags listlengths 0 494 | printables_category stringclasses 80
values | image_paths listlengths 0 289 | stl_paths listlengths 0 2.73k | license stringclasses 7
values | source stringlengths 34 40 | shard_file stringclasses 49
values |
|---|---|---|---|---|---|---|---|---|---|
139139 | Thin desiccant box | <p>Remix created to make the box thinner and narrower. Specifically designed to fix in the EZY 18L Waterproof storage box with 1kg spools on top. </p> | [
"box",
"drybox",
"filament",
"dessicant",
"filamentstorage",
"desiccant",
"filamentdrybox",
"desiccantholder",
"desiccantcontainer",
"desiccantbox",
"filamentstoragebox"
] | 3D Printers > Accessories | [
"139139/images/image_1_compressed.jpg",
"139139/images/image_2_compressed.jpg"
] | [
"139139/stls/Desiccant box Thin.stl"
] | CC-BY | https://www.printables.com/model/139139 | data_0035.tar |
411999 | Thin layers scraper (tiny+ergonomic) (with magnet) | <p>I remixed the <a href="https://www.printables.com/model/277302-thin-layers-scraper-tinyergonomic">Thin layers scraper (tiny+ergonomic)</a> from <a href="https://www.printables.com/social/179939-sh">SH</a> to add a magnet so I could hang it from my X1 Carbon.</p><p>The STL is designed for a tight fit using an <a href... | [
"tool",
"rounded",
"accessory",
"round",
"scraper",
"spatula",
"3dprint",
"ergonomic",
"3dprinteraccessories",
"360scraper"
] | 3D Printers > Accessories | [
"411999/images/image_1_compressed.jpg",
"411999/images/image_2_compressed.jpg"
] | [
"411999/stls/Round Scraper.stl"
] | CC-BY | https://www.printables.com/model/411999 | data_0035.tar |
210284 | Thin Man | <p>Print a small or large man to add some decoration to your setup or room. A handfull of arangments to fit most spaces and ledges.</p><p>standing : no need for support parts<br>climbing : no needs support parts<br>lying : needs support parts<br>sitting : needs support parts</p> | [
"decoration",
"quickprint",
"keychain",
"trinket",
"stickman",
"climbing"
] | Art & Design > Other Art & Designs | [
"210284/images/image_1_compressed.jpg",
"210284/images/image_2_compressed.jpg"
] | [
"210284/stls/climbing.stl",
"210284/stls/lying.stl",
"210284/stls/sitting.stl",
"210284/stls/St-Men_3P.stl",
"210284/stls/standing.stl",
"210284/stls/thin_man_key_chain.stl"
] | CC0 | https://www.printables.com/model/210284 | data_0035.tar |
1180750 | Thin Rip Table Saw Jig DeWalt / Rage Evolution | <p>Thin Strip Ripping Jig. Make repeatable thin strips using this Thin Rip Table Saw Jig. To set it up, install this jig in your table saw miter slot, and simply set the thickness of the strip desired. Measure the distance from the outside of the blade to the sealed bearing and lock the jig in place. Set the fence agai... | [
"table",
"blade",
"strip",
"jig",
"woodworking",
"rip",
"saw",
"thin",
"ripping"
] | Hobby & Makers > Tools | [
"1180750/images/image_1_compressed.jpg",
"1180750/images/image_2_compressed.jpg",
"1180750/images/image_3_compressed.jpg",
"1180750/images/image_4_compressed.jpg",
"1180750/images/image_5_compressed.jpg",
"1180750/images/image_6_compressed.jpg",
"1180750/images/image_7_compressed.jpg",
"1180750/images... | [
"1180750/stls/Evolution Rage -5 S runner 100 mm-Body.stl",
"1180750/stls/M6_D25_.stl",
"1180750/stls/M6_D30_.stl",
"1180750/stls/Makita MLT100 Runner-Body.stl",
"1180750/stls/Thin Strip Jig_V6-BambuStudio.stl",
"1180750/stls/Thin Strip Jig_V6-Base Body.stl",
"1180750/stls/Thin Strip Jig_V6-Lager Body.st... | CC0 | https://www.printables.com/model/1180750 | data_0035.tar |
225125 | Thin walls stackable box | <p>Thin-walled stackable box.<br>PLA filament<br>0.4 mm nozzle<br>0.2 mm layer<br>No support</p><p>The size is attached with a step file for adjustment.</p><p> </p><p><strong>Added .f3d file</strong><br>Fusion360 [MODIFY → Change Parameters]<br>You can edit the Box size</p> | [
"box",
"stackable",
"stackablecontainer"
] | Hobby & Makers > Organizers | [
"225125/images/image_1_compressed.jpg",
"225125/images/image_2_compressed.jpg",
"225125/images/image_3_compressed.jpg",
"225125/images/image_4_compressed.jpg"
] | [
"225125/stls/10x10.stl",
"225125/stls/10x10_q_href.stl",
"225125/stls/10x15.stl",
"225125/stls/10x17.5.stl",
"225125/stls/10x5.stl",
"225125/stls/10x5_w.stl",
"225125/stls/10x7.5.stl",
"225125/stls/10x7.5_w.stl",
"225125/stls/10x7.5_w_href.stl",
"225125/stls/5x7.5.stl"
] | CC0 | https://www.printables.com/model/225125 | data_0035.tar |
210291 | Thin Yoga Man | <p>Printed on a Lulzbot 5 using PLA 0.2 layer height 205 degrees </p><p>No need for support parts.<br>The Warrior needs assembling & mat.<br>The Vrksasana needs assembling & mat.</p><p> </p> | [
"decoration",
"design",
"fastprint",
"easyprint",
"silly",
"trinkets"
] | Art & Design > Other Art & Designs | [
"210291/images/image_1_compressed.jpg",
"210291/images/image_2_compressed.jpg",
"210291/images/image_3_compressed.jpg",
"210291/images/image_4_compressed.jpg",
"210291/images/image_5_compressed.jpg"
] | [
"210291/stls/Cobra.stl",
"210291/stls/Downward_Dog.stl",
"210291/stls/Mat_for_Vrksasana.stl",
"210291/stls/Mat_for_Warrior.stl",
"210291/stls/Vrksasana.stl",
"210291/stls/Warrior.stl"
] | CC0 | https://www.printables.com/model/210291 | data_0035.tar |
512531 | Thing from Wednsday | Model of the ＇thing＇ hand limb from the Wednesday TV series.
No supports needed | Download free 3D printable STL models | [
"wednesday",
"thing",
"adams",
"adamsfamily",
"wednsdayhand"
] | Costumes & Accessories > Props | [
"512531/images/image_1_compressed.jpg",
"512531/images/image_2_compressed.jpg",
"512531/images/image_3_compressed.jpg",
"512531/images/image_4_compressed.jpg"
] | [
"512531/stls/Spoiler_thing_final.stl",
"512531/stls/Wednesday_Original_Hand.stl",
"512531/stls/Wednesday_Thing.stl"
] | CC0 | https://www.printables.com/model/512531 | data_0035.tar |
183618 | Thinker Game Piece | <p>I thought this model captures what I must look like trying to play most of the time! </p><p>I downloaded the original scan of the statue here (link below) and then used the new simplify model to make it easier to print at this size. </p><p><a href="http://people.csail.mit.edu/tmertens/textransfer/data/">ht... | [] | Toys & Games > Board Games | [
"183618/images/image_1_compressed.jpg"
] | [
"183618/stls/Thinker Game Piece.stl"
] | CC0 | https://www.printables.com/model/183618 | data_0035.tar |
169952 | Thinkpad X230 X230i X230T X220 X220i X220T Hard Disk Drive (HDD) Cover - FRU 04W1414 | <p>I tend to give a home to abandoned thinkpads with missing parts. I remixed my X200 HDD cover to fit a X230 I recently got.</p>
<p>Printed without supports, 0.1mm layer. Fits like the original after a little bit of cleanup.</p>
<h3>Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Monoprice</p>
<p class="... | [
"thinkpad",
"thingiverse",
"thinkpadx230",
"thinkpadx220"
] | Hobby & Makers > Other Ideas | [
"169952/images/image_1_compressed.jpg",
"169952/images/image_2_compressed.jpg",
"169952/images/image_3_compressed.jpg"
] | [
"169952/stls/x230_hdd_cover.stl"
] | CC0 | https://www.printables.com/model/169952 | data_0035.tar |
783321 | Thinner Magnetic Benchy Display stand | <p>Get the rest of the parts from the original model here: <a href="https://www.printables.com/model/421435-6x3mm-magnets-3d-benchy-display-stand">https://www.printables.com/model/421435-6x3mm-magnets-3d-benchy-display-stand</a></p> | [
"display",
"magnet",
"benchy"
] | Art & Design > Other Art & Designs | [
"783321/images/image_1_compressed.jpg",
"783321/images/image_2_compressed.jpg"
] | [
"783321/stls/Benchy Display Module Thin.stl"
] | CC-BY | https://www.printables.com/model/783321 | data_0035.tar |
272241 | Third hand for soldering / Lötgnu, remix |
<p>First of all, this is a remix and all credits go to Wolfchild who created <a href="https://www.thingiverse.com/thing:378926">https://www.thingiverse.com/thing:378926</a> which is on its turn based on <a href="http://eigenbaukombinat.de/invasion-der-loetfanten/">http://eigenbaukombinat.de/invasion-der-loetfanten/<... | [
"soldering",
"solderingaid",
"crafts",
"thingiverse",
"thirdhand",
"soldar",
"lehim",
"saldare",
"solda",
"solderen",
"souder"
] | Hobby & Makers > Tools | [
"272241/images/image_1_compressed.jpg",
"272241/images/image_2_compressed.jpg",
"272241/images/image_3_compressed.jpg",
"272241/images/image_4_compressed.jpg",
"272241/images/image_5_compressed.jpg",
"272241/images/image_6_compressed.jpg"
] | [
"272241/stls/large_display_remix_Loetgnu_3hand_272241.stl",
"272241/stls/remix_Loetgnu_3hand.stl",
"272241/stls/remix_Loetgnu_base_1x.stl"
] | CC-BY | https://www.printables.com/model/272241 | data_0035.tar |
707073 | Thirst Zapper - Fallout Replica Prop | <p>Replica of the Thirst Zapper from the video game Fallout 4. Photos show the printed pieces after they've been sanded, painted, and glued together. <a href="https://youtu.be/lkFPUekIzsA?si=BxIs6YOQN0Jk7zk6">For more information on finishing this model, check out the video we filmed on the process</a>.</p><figure clas... | [
"cosplay",
"replica",
"prop",
"fallout",
"cosplayprop",
"cosplayweapon",
"cosplayaccessory"
] | Costumes & Accessories > Props | [
"707073/images/image_1_compressed.jpg",
"707073/images/image_2_compressed.jpg",
"707073/images/image_3_compressed.jpg"
] | [
"707073/stls/Barrel.stl",
"707073/stls/BigScrewX2.stl",
"707073/stls/BottleCap.stl",
"707073/stls/Handle.stl",
"707073/stls/HandleScrewX2.stl",
"707073/stls/LouversX3.stl",
"707073/stls/PlugX2.stl",
"707073/stls/ShroomBase.stl",
"707073/stls/ShroomMid.stl",
"707073/stls/ShroomPegFirst.stl",
"707... | CC-BY | https://www.printables.com/model/707073 | data_0035.tar |
230473 | Thirsty Drunk Dwarfs | <p>Two drunk dwarves, one with a barrel, one without.</p><p><strong>Print Settings</strong></p><ul><li><strong>Material: </strong>Prusament - Galaxy Black Pla</li><li><strong>Nozzle:</strong> 0.4mm</li><li><strong>Support: Coat: </strong>Yes (Snug)</li></ul> | [
"garden",
"dwarf",
"gnome",
"drunk",
"dwarfs"
] | Household > Outdoor & Garden | [
"230473/images/image_1_compressed.jpg",
"230473/images/image_2_compressed.jpg"
] | [
"230473/stls/thirsty_dwarf.stl",
"230473/stls/thirsty_dwarf_w_barrel.stl"
] | CC-BY | https://www.printables.com/model/230473 | data_0035.tar |
735357 | Thocky MX Keycap - Flat XDA profile | <p>Many of the models I have found are thin, giving them a higher pitch tone. These are designed with a thicker border, making them more “Thocky” than your average 3d printed keycap. The main feature is that it is easy to print and has a flat profile, almost like a chicklet key. It reminds me of a flat XDA cap.</p><p>T... | [
"keycap",
"xda"
] | Gadgets > Computers | [
"735357/images/image_1_compressed.jpg"
] | [
"735357/stls/1.25 keycap.stl",
"735357/stls/1.5 keycap.stl",
"735357/stls/A.stl",
"735357/stls/Alphabet.stl",
"735357/stls/Apostrophe.stl",
"735357/stls/B.stl",
"735357/stls/C.stl",
"735357/stls/Comma.stl",
"735357/stls/D.stl",
"735357/stls/E.stl",
"735357/stls/F.stl",
"735357/stls/G.stl",
"... | GPL3.0 | https://www.printables.com/model/735357 | data_0035.tar |
292790 | Thor Hammer (Mjolnir) | <p>Remix of <strong>thing:3030916</strong> “Thors hammer 2.0! Mjolnir”</p><p>and the stand is from <strong>thing:2222197.</strong> Thanks to all the designers to make these awesome files!</p><p>I printed this with very dense infill. 40-50% on all pieces. The handle was a little too long for the MK3 so i cut it into two... | [] | Costumes & Accessories > Cosplay & Costumes in general | [
"292790/images/image_1_compressed.jpg",
"292790/images/image_10_compressed.jpg",
"292790/images/image_2_compressed.jpg",
"292790/images/image_3_compressed.jpg",
"292790/images/image_4_compressed.jpg",
"292790/images/image_5_compressed.jpg",
"292790/images/image_6_compressed.jpg",
"292790/images/image_... | [] | CC0 | https://www.printables.com/model/292790 | data_0035.tar |
214497 | Thor kladivo | <p>Klicenka Thor kladiva - original model zmensit ve sliceru na 15% tak aby vysla klicenka. viz Foto</p><p>Tisknuto z PetG - 230°/80°</p> | [
"klicenka"
] | Costumes & Accessories > Props | [
"214497/images/image_1_compressed.jpg",
"214497/images/image_2_compressed.jpg"
] | [
"214497/stls/Thor.stl"
] | CC-BY | https://www.printables.com/model/214497 | data_0035.tar |
190424 | thor's hammer | <p>This hammer has exaggerated features that will still stand out if printed on a small scale. The tip requires a good filament and aggressive cooling to get right, but as you can see it's completly possible.</p><p> </p><p>(The Pyramids and UFO and the VW bus in the background are also on my profile)</p> | [
"marvel",
"figurine",
"thor",
"marvelcomics",
"hammer",
"thorshammer"
] | Art & Design > Other Art & Designs | [
"190424/images/image_1_compressed.jpg",
"190424/images/image_2_compressed.jpg"
] | [
"190424/stls/thor's hammer stl.stl"
] | CC-BY | https://www.printables.com/model/190424 | data_0035.tar |
914763 | Thor's Hammer Mjolnir - Life-size Prop with wall mount | <p>A life-sized 3D printable version of Thor's trusty hammer, Mjölnir!</p><figure class="media"><oembed url="https://youtube.com/shorts/LC4egjaKHCc?si=h8g1nbfkL0F4_pCx"></oembed></figure><p> </p> | [
"thor",
"mjolnir",
"hammer",
"thorshammer"
] | Costumes & Accessories > Cosplay & Costumes in general | [
"914763/images/image_1_compressed.jpg",
"914763/images/image_2_compressed.jpg",
"914763/images/image_3_compressed.jpg",
"914763/images/image_4_compressed.jpg",
"914763/images/image_5_compressed.jpg",
"914763/images/image_6_compressed.jpg",
"914763/images/image_7_compressed.jpg",
"914763/images/image_8... | [
"914763/stls/body_half_hollow.stl",
"914763/stls/body_half_solid.stl",
"914763/stls/connector_pins.stl",
"914763/stls/handle_bottom.stl",
"914763/stls/handle_middle.stl",
"914763/stls/handle_top.stl",
"914763/stls/Mjolnir Wall Mount.stl",
"914763/stls/part 1.stl",
"914763/stls/stand.stl"
] | CC-BY | https://www.printables.com/model/914763 | data_0035.tar |
705092 | Thorn - Destiny 2 | <p>This print is relatively easy; the only part that can be tricky is the receiver, which I recommend support. Besides that, it is a very easy print and can be very fun to assemble and finish. </p><p>DISCLAIMER! This thorn doesn't have the catalyst, so you'll have to grind for it in strikes!</p> | [
"cosplay",
"destiny",
"fun",
"meme",
"gun",
"pewpew"
] | Costumes & Accessories > Cosplay & Costumes in general | [
"705092/images/image_1_compressed.jpg",
"705092/images/image_2_compressed.jpg"
] | [
"705092/stls/Barrel.stl",
"705092/stls/Cartridge-holder.stl",
"705092/stls/Cartridge.stl",
"705092/stls/Grip-with-wrapping.stl",
"705092/stls/Hammer.stl",
"705092/stls/Receiver.stl"
] | CC0 | https://www.printables.com/model/705092 | data_0035.tar |
77005 | Thread 1/4 | <p>The screw on my Neewer tripod didn't fit because the thread was too loose, so i created another narrower one. To insert it into the hole you have to do a little force, it is bigger to also ensure that it does not come out of the hole, you shouldn't even need to put glue on ;)</p> | [] | 3D Printers > Other Printer Parts & Upgrades | [
"77005/images/image_1_compressed.jpg"
] | [
"77005/stls/remixed_thread.stl"
] | CC0 | https://www.printables.com/model/77005 | data_0035.tar |
107296 | Thread Bobbin | <p>Made the slits a bit thinner as the thread was coming loose on the original design.</p><p>Made the hole smaller and moved it a bit as it was too close to the edge.</p><p>v3 moved the hole a bit and made the design 0.5mm thick - and parameterised the thickness, so that it will fit one of <a href="https://www.amazon.c... | [
"embroidery",
"bobbin",
"thingiverse"
] | Hobby & Makers > Other Ideas | [
"107296/images/image_1_compressed.jpg",
"107296/images/image_2_compressed.jpg",
"107296/images/image_3_compressed.jpg",
"107296/images/image_4_compressed.jpg"
] | [
"107296/stls/floss_bobbin2.stl",
"107296/stls/floss_bobbin3.stl",
"107296/stls/thread_bobbin15.stl",
"107296/stls/thread_bobbin2.stl"
] | CC-BY | https://www.printables.com/model/107296 | data_0035.tar |
199239 | Thread Spool | <p><strong>7/16/2019 update:</strong> Added a small hole to simplify thread winding, smaller diameter of the lower part of the hole for more secure winding.</p><p>No supports needed. Printed with 0.2 layer height.</p> | [
"spool",
"sewing",
"thingiverse",
"sewingspool",
"threadspool"
] | Hobby & Makers > Other Ideas | [
"199239/images/image_1_compressed.jpg",
"199239/images/image_2_compressed.jpg"
] | [
"199239/stls/spool.stl"
] | CC-BY | https://www.printables.com/model/199239 | data_0035.tar |
802834 | Thread Winder for sewing, crochet, tricot etc. | <p>A crank drive thread winder, for sewing, crochet, tricot etc. You may transfer thread from cones or hanks to balls. May be used with any kinds of threads, like sewing threads, tricot wool threads, strings etc.</p><p> Printed with PLA, two layers bottom and top, two perimeters and 30% infill.</p> | [] | Gadgets > Other Gadgets | [
"802834/images/image_1_compressed.jpg",
"802834/images/image_2_compressed.jpg",
"802834/images/image_3_compressed.jpg",
"802834/images/image_4_compressed.jpg"
] | [
"802834/stls/threader-base_1.stl",
"802834/stls/threader-base_2.stl",
"802834/stls/threader-clamp_bushing.stl",
"802834/stls/threader-crank_knob.stl",
"802834/stls/threader-drive.stl",
"802834/stls/threader-drive_arm.stl",
"802834/stls/threader-drive_pin.stl",
"802834/stls/threader-l_crank.stl",
"80... | CC0 | https://www.printables.com/model/802834 | data_0035.tar |
502856 | Threaded Axle for Cat Toy - Treat Dispenser Puzzle - | <p>The original model is entirely glued together, this fulfills a request to make one end of the axle threaded so it can be easily disassembled to refill or replace the pod. Use all other parts (including one axle cap still glued) from the original model. The axle should be laid on its long flat edge for printing... | [
"puzzle",
"cat",
"game",
"roller",
"shaker",
"cattoy"
] | Household > Pets | [
"502856/images/image_1_compressed.jpg"
] | [
"502856/stls/Axle Double Threaded.stl",
"502856/stls/Axle Screw.stl",
"502856/stls/Axle Single Threaded.stl"
] | CC-BY | https://www.printables.com/model/502856 | data_0035.tar |
633902 | Threaded Bottle or Jar Cap Generator for Fusion 360 | <p>I've needed screw on lids for bottles and jars several times since I started 3D printing, I've always created a one-off design each time. I've used my experience and knowledge about making lids along with my experience building robust parameterized designs in Fusion 360 to create this generator.</p><p>I gathered a b... | [
"bottle",
"lid",
"cap",
"fusion360",
"bottlecap",
"threadedcap",
"threadedcontainer",
"bottlelid"
] | Household > Kitchen | [
"633902/images/image_1_compressed.jpg",
"633902/images/image_2_compressed.jpg",
"633902/images/image_3_compressed.jpg"
] | [
"633902/stls/Tree-Top Apple Juice Lid 1gal.stl"
] | CC-BY | https://www.printables.com/model/633902 | data_0035.tar |
248833 | Threaded cap for Aveeno lotion bottle |
<p>The girlfriend is always in a rush in the mornings and as her Aveeno brand lotion gets so low that the fluid no longer pumps out of the top, she has to resort to turning it upside down and gooking it on her hands. The problem is, as I said before, she's in a hurry - no time to wait for gravity to pull the goo dow... | [
"cap",
"thingiverse",
"lotion",
"aveeno"
] | Household > Bathroom | [
"248833/images/image_1_compressed.jpg",
"248833/images/image_2_compressed.jpg",
"248833/images/image_3_compressed.jpg"
] | [
"248833/stls/AveenoCap.stl",
"248833/stls/PanteneProVCap.stl"
] | CC-BY | https://www.printables.com/model/248833 | data_0035.tar |
213330 | Threaded container | <p>I've modeled this container in blender. It actually threads surprisingly well.</p>
<p>(water tight)</p>
<h3>Print Settings</h3>
<p><strong>Supports:</strong></p>
<p>No</p>
<p class="detail-setting resolution"><strong>Resolution: </strong>
<div><p>0.2mm</p></div>
<p><strong>Infill:</strong></p>
<p>20%</p>
<p><strong>... | [
"organizer",
"container",
"storage",
"blender",
"blender3d",
"screwcap",
"threaded",
"thingiverse",
"waterproof",
"watertight",
"fdm"
] | Hobby & Makers > Organizers | [
"213330/images/image_1_compressed.jpg",
"213330/images/image_2_compressed.jpg",
"213330/images/image_3_compressed.jpg",
"213330/images/image_4_compressed.jpg",
"213330/images/image_5_compressed.jpg"
] | [
"213330/stls/nakretka2.stl",
"213330/stls/POJEMNIK5.stl"
] | CC-BY | https://www.printables.com/model/213330 | data_0035.tar |
1301478 | Threaded Core One Spool Holder | <p>Removable spool holder to allow easy placement of Polymaker Polydryer in external spool bay using this <a href="https://www.printables.com/model/1253387-core-one-polydryer-shelf">https://www.printables.com/model/1253387-core-one-polydryer-shelf</a></p><p>Added a second file where the split between the two pieces is ... | [] | 3D Printers > Prusa Parts & Upgrades | [
"1301478/images/image_1_compressed.jpg",
"1301478/images/image_2_compressed.jpg"
] | [
"1301478/stls/spool holder threaded shorter.stl",
"1301478/stls/spool holder threaded.stl"
] | GPL2.0 | https://www.printables.com/model/1301478 | data_0035.tar |
139109 | Threaded Drywall Anchor | <p>Anchor that screws into drywall, with internal thread for 8-32 bolt. Simply drill a ¼" hole in your drywall and turn the anchor in with a Phillip's screwdriver until the end is flush with the drywall. The threads in the center hole accept an 8-32 bolt. </p> | [
"threaded",
"dyi",
"drywall",
"drywallanchor"
] | Hobby & Makers > Mechanical Parts | [
"139109/images/image_1_compressed.jpg",
"139109/images/image_2_compressed.jpg",
"139109/images/image_3_compressed.jpg",
"139109/images/image_4_compressed.jpg",
"139109/images/image_5_compressed.jpg",
"139109/images/image_6_compressed.jpg",
"139109/images/image_7_compressed.jpg"
] | [
"139109/stls/drywall_anchor.stl"
] | CC0 | https://www.printables.com/model/139109 | data_0035.tar |
170041 | Threaded Easter Egg | <p>Print at 0.2mm layer height. Watch video below to see printing orientation.</p><p>Fusion 360 tutorials at <a href="https://www.desktopmakes.com/">https://www.desktopmakes.com/</a></p><p>I've included both STL files and 3MF files</p> | [
"easter",
"easteregg",
"threads",
"threadedegg"
] | Seasonal designs > Spring & Easter | [
"170041/images/image_1_compressed.jpg",
"170041/images/image_2_compressed.jpg"
] | [
"170041/stls/Egg_Bottom_3mf.stl",
"170041/stls/Egg_Bottom_stl.stl",
"170041/stls/Egg_Top_3mf.stl",
"170041/stls/Egg_Top_stl.stl"
] | CC0 | https://www.printables.com/model/170041 | data_0035.tar |
305345 | Threaded End for Paint Roller or Broom Handle | <p>A replacement threaded end for a paint roller extension pole or broom, mop, or duster handle. This fits a hollow pipe with an inner diameter of approximately 0.8" / 20.4mm. The source is included if your pole diameter is different. It fits my rollers, brooms, mop, and duster well with no play in the threads once tig... | [
"screw",
"paint",
"broom",
"threaded",
"thingiverse",
"duster",
"mop"
] | Household > Other House Equipment | [
"305345/images/image_1_compressed.jpg",
"305345/images/image_2_compressed.jpg",
"305345/images/image_3_compressed.jpg"
] | [
"305345/stls/paint_roller_attachment.stl"
] | GPL2.0 | https://www.printables.com/model/305345 | data_0035.tar |
798494 | Threaded Fidget | <p>After printing some different threads I found them pretty fidgety. So I decided to make in into a fidget toy. </p><p><strong>Print instructions:</strong></p><p>The model has a lot of 60degree overhangs, make sure your printer is able to do them well. Don't add supports.</p><figure class="image image_resized ima... | [
"fidget",
"fidgettoy",
"thread",
"threaded"
] | Toys & Games > Other Toys & Games | [
"798494/images/image_1_compressed.jpg",
"798494/images/image_2_compressed.jpg",
"798494/images/image_3_compressed.jpg",
"798494/images/image_4_compressed.jpg"
] | [
"798494/stls/Threadfidget_base.stl",
"798494/stls/Threadfidget_ring.stl"
] | CC-BY | https://www.printables.com/model/798494 | data_0035.tar |
481763 | Threaded knurled container | <p>Created stl from this tutorial: </p><figure class="media"><oembed url="https://www.youtube.com/watch?v=Q6oNjV9a2KU"></oembed></figure><p><br>Calculator for threads can be found here: <a href="http://www.otvinta.com/thread.html">http://www.otvinta.com/thread.html</a></p><p>Container really closes tightly - nice ... | [] | Art & Design > Other Art & Designs | [
"481763/images/image_1_compressed.jpg",
"481763/images/image_2_compressed.jpg"
] | [
"481763/stls/bottom.stl",
"481763/stls/top.stl"
] | CC0 | https://www.printables.com/model/481763 | data_0035.tar |
85939 | Threaded MK8 Nozzle Container - Larger |
<p>I liked the idea of the original MK8 nozzle holder, but I had purchased larger packs with more sizes than offered, so I remixed it to hold more size, and even more .4 nozzles.</p>
<p>UPDATE 2/25/21: Added "Hardened Steel Nozzles", "Stainless Steel Nozzles" and "Brass Nozzles" covers by request.</p>
<h3> Print Setti... | [
"container",
"storagebox",
"nozzles",
"nozzleholder",
"thingiverse",
"mk8",
"mk8nozzle",
"nozzlecontainer",
"sparenozzles"
] | 3D Printers > Accessories | [
"85939/images/image_1_compressed.jpg",
"85939/images/image_2_compressed.jpg",
"85939/images/image_3_compressed.jpg",
"85939/images/image_4_compressed.jpg"
] | [
"85939/stls/Brass_Cover.stl",
"85939/stls/Hardened_Cover.stl",
"85939/stls/Nozzle_Case.stl",
"85939/stls/Nozzle_Case_Cover.stl",
"85939/stls/Stainless_Cover.stl"
] | CC-BY | https://www.printables.com/model/85939 | data_0035.tar |
62789 | Threaded MMU Selector Front Plate for PC4-M10 PTFE Tube Connector | <p>This improved file has an integrated thread for a standard PC4-M10 PTFE tube push connector. This allows for you to print your own threaded part for the best push connector option rather than having to break out the soldering iron for a threaded insert after you've tracked it down and ordered it on ebay. If your PTF... | [
"prusa",
"prusai3",
"mmu",
"part",
"originalprusai3mk3",
"prusai3mk3smmu2s",
"prusai3mk3mmu2",
"pc4m10",
"threaded",
"3dprinterparts",
"thingiverse",
"replacementpart"
] | 3D Printers > Prusa Parts & Upgrades | [
"62789/images/image_1_compressed.jpg",
"62789/images/image_2_compressed.jpg"
] | [
"62789/stls/mmu2-selector-front-plate - PC4-M10.stl"
] | CC-BY | https://www.printables.com/model/62789 | data_0035.tar |
98369 | Threaded Paper Towel / toilet paper holder | <p>Needed an under-cabinet paper towel support solution. Did not like the compliant ones as I'm afraid they will age poorly.</p><p>Designed my own. The light green version has been in our kitchen now for 2 years and works very well for us. This one had shorter screws on both sides wich made a quick change easy by remov... | [
"towel",
"paper",
"toilet",
"big",
"screw",
"thread",
"cabinet",
"roll",
"under",
"undercabinet"
] | Household > Other House Equipment | [
"98369/images/image_1_compressed.jpg",
"98369/images/image_2_compressed.jpg",
"98369/images/image_3_compressed.jpg",
"98369/images/image_4_compressed.jpg",
"98369/images/image_5_compressed.jpg",
"98369/images/image_6_compressed.jpg",
"98369/images/image_7_compressed.jpg"
] | [
"98369/stls/Screw_long.stl",
"98369/stls/Screw_Short.stl",
"98369/stls/Support.stl"
] | CC-BY | https://www.printables.com/model/98369 | data_0035.tar |
256297 | Threaded Revo 6 nozzle holder | <p>A small nozzle holder for the Revo 6 nozzles, fits on the Prusa MK3 frame. The holes have threads the last couple of millimeters so you need to screw the nozzles in. This keeps them from rattling about and making noise when the printer moves.</p><p>I always have one nozzle installed so I only needed the holder to ho... | [
"e3drevo"
] | 3D Printers > Accessories | [
"256297/images/image_1_compressed.jpg"
] | [
"256297/stls/Revo 6 Holder.stl"
] | CC0 | https://www.printables.com/model/256297 | data_0035.tar |
537018 | Threaded Round Box (OnShape Parametric) | <p>Design can be modified inside OnShape completely by using Variables.</p><p><strong>Link to OnShape </strong>Model:https://cad.onshape.com/documents/cca6d8698a8729e22cf7af48/w/21bbbf66c513f22f97ff76b0/e/e86cc82f8a8eaa2d6b278c01?renderMode=0&uiState=64c1247c83d1591d8736cdaf<br> </p> | [
"pillbox",
"cases",
"boxes"
] | Hobby & Makers > Organizers | [
"537018/images/image_1_compressed.jpg",
"537018/images/image_2_compressed.jpg",
"537018/images/image_3_compressed.jpg",
"537018/images/image_4_compressed.jpg",
"537018/images/image_5_compressed.jpg"
] | [
"537018/stls/Threaded Case Bottom Id100xH173mm.stl",
"537018/stls/Threaded Case Bottom Id60xH43mm.stl",
"537018/stls/Threaded Case Bottom_Id35xH19mm.stl",
"537018/stls/Threaded Case Top Id60xH43mm.stl",
"537018/stls/Threaded Case Top Id100xH173mm.stl",
"537018/stls/Threaded Case Top Id35xH19mm.stl"
] | CC-BY | https://www.printables.com/model/537018 | data_0035.tar |
1213480 | Threaded Tire Valve Cap | <p>Made for Schrader type valve. (the most common type)</p><p>Fits mountain bikes, road bikes, cars and motorcycles.<br><br>0.15mm tolerance on the default model and 0.05mm on the tight version</p><p>Optimized for 0.12mm layer height.</p><p>Please, share your feedback if you liked this model.</p> | [
"car",
"bicycle",
"mtb",
"motorcycle",
"tirecap",
"tirevalvecap"
] | Hobby & Makers > Automotive | [
"1213480/images/image_1_compressed.jpg",
"1213480/images/image_2_compressed.jpg",
"1213480/images/image_3_compressed.jpg"
] | [
"1213480/stls/tirecap.stl",
"1213480/stls/tirecap_tight.stl"
] | CC-BY | https://www.printables.com/model/1213480 | data_0035.tar |
483983 | Three Controllers Stand for PlayStation, Xbox, Switch, and PC | <p>Remixed from Browns PlayStation Xbox Switch Controller Stand </p><p><a href="https://www.thingiverse.com/thing:5448160">https://www.thingiverse.com/thing:5448160</a></p><p>Holds 3 controllers instead of the original 4 and the space between the controllers was increased. Should be easier to pull a single control... | [
"holder",
"nintendo",
"switch",
"playstation",
"console",
"nintendoswitch",
"pc",
"sony",
"displaystand",
"xbox",
"xbox360",
"xboxcontroller",
"xboxone",
"playstation4",
"xboxcontrollerstand",
"xboxonecontroller",
"playstation1",
"playstation3",
"playstation2",
"playstation5",
... | Gadgets > Video Games | [
"483983/images/image_1_compressed.jpg",
"483983/images/image_2_compressed.jpg",
"483983/images/image_3_compressed.jpg"
] | [
"483983/stls/base.stl",
"483983/stls/PC.stl",
"483983/stls/Three Controller Stand.stl"
] | CC-BY | https://www.printables.com/model/483983 | data_0035.tar |
153205 | Three Gear Heart Stand |
<p>This is a simple stand for user Emmett's Three Gear hearts (<a href="https://www.thingiverse.com/thing:243278">http://www.thingiverse.com/thing:243278</a>).</p>
<p>I've created one for each of the three different gear ratios he made as I think they are slightly different shapes.</p>
<p>You'll notice there is a lo... | [
"stand",
"thingiverse",
"gearedheart"
] | Art & Design > Sculptures | [
"153205/images/image_1_compressed.jpg",
"153205/images/image_2_compressed.jpg",
"153205/images/image_3_compressed.jpg",
"153205/images/image_4_compressed.jpg",
"153205/images/image_5_compressed.jpg",
"153205/images/image_6_compressed.jpg"
] | [
"153205/stls/GearedHeratStand_1-2.stl",
"153205/stls/GearedHeratStand_2-3.stl",
"153205/stls/GearedHeratStand_5-6.stl"
] | CC-BY | https://www.printables.com/model/153205 | data_0035.tar |
330914 | Three Piece Hat for Articulated Snowman | <p>I made this remix to make it easy to print multiple snowman hats at the same time. The hat is split into three parts: </p><ul><li>top - suggest printing in black</li><li>middle - use an accent colour</li><li>bottom - print in black</li></ul><p>There is a small recess on the bottom and middle parts to ensure the... | [
"snowman",
"hat",
"fidget",
"fidgettoy",
"articulated",
"christman"
] | Seasonal designs > Winter & Christmas & New Year's | [
"330914/images/image_1_compressed.jpg",
"330914/images/image_2_compressed.jpg"
] | [
"330914/stls/Snowman Hat-bottom.stl",
"330914/stls/Snowman Hat-mid.stl",
"330914/stls/Snowman Hat-top.stl"
] | CC-BY | https://www.printables.com/model/330914 | data_0035.tar |
924613 | Three Plates Burr Puzzle | [] | Toys & Games > Puzzles & Brain-teasers | [
"924613/images/image_1_compressed.jpg",
"924613/images/image_2_compressed.jpg",
"924613/images/image_3_compressed.jpg"
] | [
"924613/stls/threePlates_14m.stl"
] | CC0 | https://www.printables.com/model/924613 | data_0035.tar | |
1300708 | Three Story Birdhouse / No Supports! Improved! | <p>Update 6/16/25: New cosmetic improvements! Dormer now uses inserts so color can match house color. Dormer inserts slide straight up into the dormer roof and are held in place by the wall below (see photo). Made the mortise and tenons blind, so they are not visible on the outside for a cleaner look. I also slightly r... | [
"bird",
"birdhouse",
"house",
"nest",
"avian",
"aviary"
] | Household > Outdoor & Garden | [
"1300708/images/image_1_compressed.jpg",
"1300708/images/image_10_compressed.jpg",
"1300708/images/image_11_compressed.jpg",
"1300708/images/image_12_compressed.jpg",
"1300708/images/image_13_compressed.jpg",
"1300708/images/image_2_compressed.jpg",
"1300708/images/image_3_compressed.jpg",
"1300708/im... | [
"1300708/stls/Bottom_Back.stl",
"1300708/stls/Bottom_Floor.stl",
"1300708/stls/Bottom_Front.stl",
"1300708/stls/Bottom_Left.stl",
"1300708/stls/Bottom_Middle_Roof_Dormer.stl",
"1300708/stls/Bottom_Middle_Roof_Notched.stl",
"1300708/stls/Bottom_Middle_Roof_Regular.stl",
"1300708/stls/Bottom_Right.stl",... | CC-BY | https://www.printables.com/model/1300708 | data_0035.tar |
363594 | three tier eyeglasses holder | <p>i have several different pairs of sunglasses and eyeglasses i wear and want something that could hold a few of the once i wear more frequently but still be easy to get to.</p> | [] | Household > Office | [
"363594/images/image_1_compressed.jpg",
"363594/images/image_2_compressed.jpg"
] | [
"363594/stls/eyeglasses holder (3).stl"
] | CC-BY | https://www.printables.com/model/363594 | data_0035.tar |
591025 | Three wing knob for M6 bolt | <p>pretty much self-explanatory. Fast and ugly print :-).</p> | [
"knob",
"m6bolt"
] | Hobby & Makers > Mechanical Parts | [
"591025/images/image_1_compressed.jpg",
"591025/images/image_2_compressed.jpg"
] | [
"591025/stls/M6 knob.stl"
] | CC-BY | https://www.printables.com/model/591025 | data_0035.tar |
197718 | Throw lever for Vortex Diamondback Tactical 6-24x50 FFP |
<p>Zoom throw lever for Vortex Diamondback Tactical 6-24x50 FFP</p>
<p>Probably works with some other Vortex scopes.</p>
<p>I redesigned a bit the zoom throw lever by NJ_v_N.</p>
<p>Added 3mm threaded insert, elongated the lever.</p>
<h3>Print Settings</h3>
<p><strong>Printer:</strong></p>
<p>Printo3D i3 clone</p>
<... | [
"gun",
"vortex",
"thingiverse",
"diamondback"
] | Sports & Outdoor > Other Sports | [
"197718/images/image_1_compressed.jpg",
"197718/images/image_2_compressed.jpg",
"197718/images/image_3_compressed.jpg"
] | [
"197718/stls/vortex.stl"
] | CC0 | https://www.printables.com/model/197718 | data_0035.tar |
401868 | Throwing Card That Whistles | <p>I was having a lot of fun with RAWICE511's throwing card, so I thought I'd bring it to Printables! It does make a whistling/whooshing sound when thrown right, but it takes practice. Printing in PETg or ABS is recommended since it has more flexibility and is less likely to crack or shatter. Cards printed in PLA... | [
"filamentsample",
"filamentsamples",
"filamentswatch",
"throwingstar",
"throwingstars",
"throwingtoy",
"throwingcards",
"filamentsamplecard"
] | Toys & Games > Other Toys & Games | [
"401868/images/image_1_compressed.jpg",
"401868/images/image_2_compressed.jpg"
] | [
"401868/stls/throwing_card.stl"
] | CC-BY | https://www.printables.com/model/401868 | data_0035.tar |
701631 | Throwing Knife | <p>This is 1:1 replica of JKR523 throwing knife. Original is full metal, but in my opinion 3d printed works just fine. Remember that throwing knives requires lot of practice to master, so don't give up after few tries.</p> | [
"knife",
"throwing"
] | Toys & Games > Outdoor Toys | [
"701631/images/image_1_compressed.jpg",
"701631/images/image_2_compressed.jpg"
] | [
"701631/stls/Throwing Knife.stl"
] | CC-BY | https://www.printables.com/model/701631 | data_0035.tar |
743954 | Throwing Knife - Halves for gluing | <p>Fun little throwing knife. Works great with 50% infill to give it some weight. Printed at .1mm to keep the detail, but works great at .2mm. Used a few drops of CA to glue together. </p> | [
"knife",
"throwingknife"
] | Sports & Outdoor > Indoor Sports | [
"743954/images/image_1_compressed.jpg"
] | [
"743954/stls/Throwing Knife - 2x Slim for Gluing.stl"
] | CC-BY | https://www.printables.com/model/743954 | data_0035.tar |
312897 | Throwing star | <p>its a star, but it doesn't shine. It hurts.</p> | [
"that",
"throwingstar",
"me",
"at",
"dont",
"throw"
] | World & Scans > Historical Context | [
"312897/images/image_1_compressed.jpg"
] | [
"312897/stls/throwing_star.stl"
] | CC0 | https://www.printables.com/model/312897 | data_0035.tar |
877194 | Thug Life Glasses | Thug Life Glasses | Download free 3D printable STL models | [
"games",
"meme",
"glasses",
"cubes",
"thuglife"
] | Costumes & Accessories > Cosplay & Costumes in general | [
"877194/images/image_1_compressed.jpg"
] | [
"877194/stls/ThugLifeGlasses.stl"
] | CC0 | https://www.printables.com/model/877194 | data_0035.tar |
908229 | Thug Life Glasses (but printable) | <p>0.2 layer height, print it in a flat orientation with top of the frame down on the bed</p> | [
"minecraft",
"sunglasses",
"thug"
] | Costumes & Accessories > Cosplay & Costumes in general | [
"908229/images/image_1_compressed.jpg",
"908229/images/image_2_compressed.jpg"
] | [
"908229/stls/ThugLifeGlasses.stl"
] | CC0 | https://www.printables.com/model/908229 | data_0035.tar |
1461535 | Thug Life Glasses / Deal with it | <p>Print with supports on build plate.</p><p>Insert temples in holes.</p> | [
"meme",
"life",
"glasses",
"thug",
"mlg"
] | Fashion > Other Fashion Accessories | [
"1461535/images/image_1_compressed.jpg"
] | [
"1461535/stls/thug-life-glasses.stl"
] | CC-BY | https://www.printables.com/model/1461535 | data_0035.tar |
608354 | Thule Key Tag | <p>Printed in PETG (will be left in hot car) with color change and ironing for the logo</p> | [
"tag",
"key"
] | Hobby & Makers > Automotive | [
"608354/images/image_1_compressed.jpg"
] | [
"608354/stls/Thule Key Tag.stl"
] | CC0 | https://www.printables.com/model/608354 | data_0035.tar |
555259 | Thule Urban Glide anchor | <p>Západka pro sportovní kočárek Thule Urban Glide. Oproti originálu mírně zesílená, ale odzkoušená a fungující. Tiskl jsem z PC ale i z PETG je to OK. Vrstva 0,2mm, 6 perimetrů.</p><p>Latch for the Thule Urban Glide sports stroller. Slightly reinforced compared to the original, but tested and working. I printed from a... | [
"anchor",
"thule",
"stroller",
"urbanglide"
] | 3D Printers > Other Printer Parts & Upgrades | [
"555259/images/image_1_compressed.jpg"
] | [
"555259/stls/thule_anchor.stl"
] | CC0 | https://www.printables.com/model/555259 | data_0035.tar |
410266 | Thumb Cuffs | <p>The original by Bababbak is a lovely design and does what it needs too with allot of practical simplicity. <br>But the authors own recommendation was to print a remix with a metal spring. <br>I've always been a bit of a purest in finding ways to think around the need for non printed parts. the original had... | [
"hand",
"mechanicaltoy",
"lock",
"key",
"thumb",
"handcuffs",
"cuffs",
"thumbcuffs"
] | Sports & Outdoor > Indoor Sports | [
"410266/images/image_1_compressed.jpg",
"410266/images/image_2_compressed.jpg",
"410266/images/image_3_compressed.jpg"
] | [
"410266/stls/Thumb cuff build plate ..stl"
] | CC-BY | https://www.printables.com/model/410266 | data_0035.tar |
367219 | Thumb Driver Grip for 1/4" Hex Bit | <p>To get the best strength print with 100% infill.</p> | [
"knob",
"handle",
"grip",
"hex",
"screwdriver",
"hexbit",
"driver"
] | Hobby & Makers > Tools | [
"367219/images/image_1_compressed.jpg",
"367219/images/image_2_compressed.jpg"
] | [
"367219/stls/bit knob1.stl",
"367219/stls/bit knob1_tighter.stl",
"367219/stls/bit knob2.stl",
"367219/stls/bit knob2_tighter.stl"
] | CC-BY | https://www.printables.com/model/367219 | data_0035.tar |
322889 | Thumb page holder | <p>Simple page holder for reading books. </p><p>The size is perfect for a thumb but it can be scaled up if you want it longer.</p><p>It prints in only a few minutes and is easy to take anywhere with you!</p> | [
"book",
"reading",
"3dprinter",
"bookmark",
"ender3",
"crealityender3",
"page",
"pageholder",
"ender3v2"
] | Household > Office | [
"322889/images/image_1_compressed.jpg",
"322889/images/image_2_compressed.jpg",
"322889/images/image_3_compressed.jpg"
] | [
"322889/stls/Page_Holder.stl"
] | CC-BY | https://www.printables.com/model/322889 | data_0035.tar |
248607 | thumb palette | <p>small thumb palette, for small hands. in 3mf model added a modificator piece for ironing. 4 lids</p><p>print with 0.4mm nozzle, 0.30mm layer, infill 10%, flow 0.65mm, ironing in lids only. time to print in Kingroon KP3S only 51 min.</p> | [
"palette",
"modelpainting",
"thumbpalette"
] | Hobby & Makers > Tools | [
"248607/images/image_1_compressed.jpg",
"248607/images/image_2_compressed.jpg",
"248607/images/image_3_compressed.jpg",
"248607/images/image_4_compressed.jpg"
] | [
"248607/stls/palette with ironing modificator.stl",
"248607/stls/palette.stl"
] | CC-BY | https://www.printables.com/model/248607 | data_0035.tar |
443711 | Thumb Piano | <p>A simple fully printable thumb piano (Kalimba ?) in 3 parts. I set 3 perimeters and:</p><p>1) PLA+ with 100% infill for the pads.</p><p>2) PLA with 100% infill for the shell.</p><p>3) PLA with 10% infill for the intermediate part.</p><p>Just glue the parts together with cyano.</p><p>I am more or less satisfied of th... | [
"piano",
"thumb"
] | Hobby & Makers > Music | [
"443711/images/image_1_compressed.jpg",
"443711/images/image_2_compressed.jpg",
"443711/images/image_3_compressed.jpg",
"443711/images/image_4_compressed.jpg"
] | [
"443711/stls/intermediate_part_v2.stl",
"443711/stls/pads_v2.stl",
"443711/stls/shell.stl"
] | CC-BY | https://www.printables.com/model/443711 | data_0035.tar |
732566 | Thumb Screw (Knob) for Socket Head Screw - Inch (#6,#8,#10,1/4") and Metric (M3, M4, M5, M6) | <p>I needed to replace a missing thumb screw, and since my CAD design is parametric I thought I might as well make a range of sizes while I was at it, just in case of a future need. Sizes include :</p><figure class="table" style="width:200px;"><table><tbody><tr><td style="background-color:#40C8E8;width:30px;"><strong>I... | [] | Hobby & Makers > Mechanical Parts | [
"732566/images/image_1_compressed.jpg",
"732566/images/image_2_compressed.jpg",
"732566/images/image_3_compressed.jpg",
"732566/images/image_4_compressed.jpg",
"732566/images/image_5_compressed.jpg",
"732566/images/image_6_compressed.jpg"
] | [
"732566/stls/ThumbKnobM3 - Knob.stl",
"732566/stls/ThumbKnobM3-4-5-6 - Knob.stl",
"732566/stls/ThumbKnobM4 - Knob.stl",
"732566/stls/ThumbKnobM5 - Knob.stl",
"732566/stls/ThumbKnobM6 - Knob.stl",
"732566/stls/ThumbKnobNo.10 - Knob.stl",
"732566/stls/ThumbKnobNo.14 - Knob.stl",
"732566/stls/ThumbKnobNo... | CC0 | https://www.printables.com/model/732566 | data_0035.tar |
618084 | Thumb screw head | <p>Thumb screws are multipurpose fasteners designed to be tightened and loosened by hand, rather than needing tools like screwdrivers or wrenches for installation.<br> </p><p>dimensions:</p><figure class="image"><img src="https://media.printables.com/media/prints/618084/rich_content/b2655d7c-5b07-4d97-ae57-c7a3d18... | [
"screw",
"metric",
"screwcap",
"thumbscrew"
] | Hobby & Makers > Mechanical Parts | [
"618084/images/image_1_compressed.jpg",
"618084/images/image_2_compressed.jpg"
] | [
"618084/stls/all_in_one_file.stl",
"618084/stls/M10_screw_head.stl",
"618084/stls/M12_screw_head.stl",
"618084/stls/M3_screw_head.stl",
"618084/stls/M4_screw_head.stl",
"618084/stls/M5_screw_head.stl",
"618084/stls/M6_screw_head.stl",
"618084/stls/M8_screw_head.stl"
] | CC0 | https://www.printables.com/model/618084 | data_0035.tar |
696224 | Thumb screw knobs for hex screws and nuts | <p>Collection of thumb screw knobs for hexagonal screws and nuts (DIN 933 + DIN 934) in sizes from M3 to M8.</p><p>All knobs are here in both directions. So feel free to pick the one you need.</p><p>I recommend ABS a 0.6 nozzle and 0.3 layers (see 3mf) and printing the hex side on top. Files may have the wrong directio... | [
"prusa",
"hexagon",
"knob",
"nut",
"grip",
"star",
"screw",
"m4",
"m6",
"m3",
"m5",
"din",
"m8",
"din934",
"din933",
"934",
"933"
] | Hobby & Makers > Mechanical Parts | [
"696224/images/image_1_compressed.jpg",
"696224/images/image_2_compressed.jpg",
"696224/images/image_3_compressed.jpg"
] | [
"696224/stls/knob_M3.stl",
"696224/stls/knob_M4.stl",
"696224/stls/knob_M5.stl",
"696224/stls/knob_M6.stl",
"696224/stls/knob_M8.stl",
"696224/stls/knob_rev_M3.stl",
"696224/stls/knob_rev_M4.stl",
"696224/stls/knob_rev_M5.stl",
"696224/stls/knob_rev_M6.stl",
"696224/stls/knob_rev_M8.stl",
"69622... | CC-BY | https://www.printables.com/model/696224 | data_0035.tar |
378183 | Thumb Tabs for Leatherman FREE P4 or P2 | <p>You can print this using whatever you want, I've obtained great results with PLA and TPU. <br>No screw required, increase print to 102% if you use TPU to better and firmly fit into the blade.</p><p> </p><p><a href="https://coff.ee/giorgiofox3d">Buy me a coffee if you want to support me!</a></p> | [
"pocket",
"multitool",
"leatherman",
"utilityknife"
] | Hobby & Makers > Tools | [
"378183/images/image_1_compressed.jpg",
"378183/images/image_2_compressed.jpg",
"378183/images/image_3_compressed.jpg",
"378183/images/image_4_compressed.jpg"
] | [
"378183/stls/MainorSecondarybladeThumb2mm.stl",
"378183/stls/MainorSecondarybladeThumb4mm.stl",
"378183/stls/WoodBlade.stl"
] | CC0 | https://www.printables.com/model/378183 | data_0035.tar |
699061 | Thumb war ring | <p>I printed this on my mini.</p><p>Settings: 0.4mm nozzle, 0.2mm layer height, PLA (unless noted below)</p><p>for the mat: 0.1mm layer height from 3mm - 3.4mm with iron set to top most layer</p><p>for handle: brim on handle posts only</p><p>for posts: support on square edge sections</p> | [] | Toys & Games > Other Toys & Games | [
"699061/images/image_1_compressed.jpg",
"699061/images/image_2_compressed.jpg",
"699061/images/image_3_compressed.jpg",
"699061/images/image_4_compressed.jpg",
"699061/images/image_5_compressed.jpg",
"699061/images/image_6_compressed.jpg",
"699061/images/image_7_compressed.jpg"
] | [
"699061/stls/handle.stl",
"699061/stls/mat.stl",
"699061/stls/posts.stl",
"699061/stls/rope.stl",
"699061/stls/thumb war handle.stl",
"699061/stls/thumb war mat.stl",
"699061/stls/thumb war posts.stl",
"699061/stls/thumb war rope.stl"
] | CC-BY | https://www.printables.com/model/699061 | data_0035.tar |
72236 | Thumbgrip for Fujifilm X-T20/X-T10/X-T30 | Remixed from VZPHOTOs Fuji X100V Thumbgrip.
For XT20, I needed it to be a little longer so here it is. | Download free 3D printable STL models | [
"camera",
"fujifilm",
"thingiverse",
"thumb",
"thumbrest",
"thumbgrip",
"xt10",
"xt20"
] | Gadgets > Photo & Video | [
"72236/images/image_1_compressed.jpg",
"72236/images/image_2_compressed.jpg",
"72236/images/image_3_compressed.jpg"
] | [
"72236/stls/XT20_thumbrest.stl"
] | CC-BY | https://www.printables.com/model/72236 | data_0035.tar |
172003 | Thumbscrew Top for standard M4 hex screw |
<p>This part fits into the top of a standard M4 hex screw, converting it to a thumbscrew - great for assemblies that need to be constantly adjusted. This was originally designed for use on a Folgertech 2020 Prusia i3, for the L bracket holding the filament spool in place (The original set screw was replaced by a sta... | [
"thingiverse"
] | Hobby & Makers > Other Ideas | [
"172003/images/image_1_compressed.jpg",
"172003/images/image_2_compressed.jpg",
"172003/images/image_3_compressed.jpg"
] | [
"172003/stls/thumbscrew.stl"
] | CC-BY | https://www.printables.com/model/172003 | data_0035.tar |
286249 | Thumbwheel lock for Kingroon KP3 *UPDATED KP3s* by monsieurglad | <p>Originally found HomeGrown3D's Ender 3 version while looking for new knobs for the KP3S and thought the locks were very clever (will be adding to my Ender very soon). Posting monsieurglad's files here simply for convenience as I am looking to consolidate my Collections and Makes into fewer repositories. </p> | [
"kingroonkp3s",
"kp3s"
] | 3D Printers > Other Printer Parts & Upgrades | [
"286249/images/image_1_compressed.jpg"
] | [
"286249/stls/KP3_S_Back-left_thumbwheel_lock.stl",
"286249/stls/KP3_thumbwheel_lock.stl"
] | CC-BY | https://www.printables.com/model/286249 | data_0035.tar |
284004 | Thundercats Coaster and Keychain | <p>Thundercats coasters and keychains. I've included 2 versions of the coaster, V1 the logo is raised, V2 the logo is inset, which may be better when using it as an actual coaster. Up to you what you want to print!</p><p>Happy printing and Thundercats Ho!!!!!</p> | [
"coaster",
"keychain",
"drinkcoaster",
"thundercats"
] | Art & Design > 2D Plates & Logos | [
"284004/images/image_1_compressed.jpg"
] | [
"284004/stls/ThundercatsCoasterV1.stl",
"284004/stls/ThundercatsCoasterV2.stl",
"284004/stls/ThundercatsKeychain.stl"
] | CC-BY | https://www.printables.com/model/284004 | data_0035.tar |
46099 | THWACK | <p>This lean, mean, ball-peen is ready for your general clobbering needs! And while it won't drive a galvanized nail into a pressure-treated fence-post, it will dutifully bludgeon interior nails, bang tight-fitting objects together, annoy individuals with experimental jazz percussion and acceptably intimidate others wh... | [
"3d",
"tool",
"hammer",
"makerbot",
"thingiverse",
"erikjdurwoodii",
"sudo",
"thwack",
"megatronic"
] | Hobby & Makers > Tools | [
"46099/images/image_1_compressed.jpg",
"46099/images/image_2_compressed.jpg",
"46099/images/image_3_compressed.jpg"
] | [
"46099/stls/thwack-sudo.stl",
"46099/stls/thwack-v2.stl",
"46099/stls/thwack.stl"
] | CC-BY | https://www.printables.com/model/46099 | data_0035.tar |
535667 | Thwomp | <p>Thwomp - Super Mario Brothers</p> | [
"supermario"
] | Art & Design > Sculptures | [
"535667/images/image_1_compressed.jpg"
] | [
"535667/stls/twomp.stl"
] | CC-BY | https://www.printables.com/model/535667 | data_0035.tar |
159361 | Thwomp - Several Types Function | <p><strong>Can use:</strong></p><ul><li>Nintendo Switch cartridge holder.</li><li>Flowerpot with Ikea Fejka - 60 mm artificial flowers.</li><li>Moneybox</li><li>Candy box.</li><li>Pen holder</li><li>Or just statue</li></ul><p>If you want to use cartridge holder, print out the cartridge holder file, there's little bit d... | [
"box",
"mario",
"nintendo",
"switch",
"cartridge",
"penholder",
"flowerpot",
"coinholder",
"cartridgeholder",
"candybox",
"candyhiding"
] | Household > Other House Equipment | [
"159361/images/image_1_compressed.jpg",
"159361/images/image_2_compressed.jpg",
"159361/images/image_3_compressed.jpg",
"159361/images/image_4_compressed.jpg",
"159361/images/image_5_compressed.jpg"
] | [
"159361/stls/cartridge_holder_a.stl",
"159361/stls/cartridge_holder_b.stl",
"159361/stls/thwomp_cartridge_holder.stl",
"159361/stls/thwomp_top.stl",
"159361/stls/thwormp_box.stl",
"159361/stls/thwormp_box_coin_top.stl",
"159361/stls/thwormp_statue.stl"
] | CC-BY | https://www.printables.com/model/159361 | data_0035.tar |
229174 | TI-84 Plus Battery Cover | <h3>Print settings</h3><p><br>I printed it in PLA using a 0.2mm layer height with my stock Prusa Mini+. </p><p> </p><h3>Video showcase</h3><p> </p><figure class="media"><oembed url="https://www.youtube.com/watch?v=JRbcaboyUxY"></oembed></figure> | [
"cover",
"calculator",
"batterycover"
] | Gadgets > Other Gadgets | [
"229174/images/image_1_compressed.jpg",
"229174/images/image_2_compressed.jpg",
"229174/images/image_3_compressed.jpg",
"229174/images/image_4_compressed.jpg"
] | [
"229174/stls/Cover.stl"
] | CC-BY | https://www.printables.com/model/229174 | data_0035.tar |
341549 | Tiacat | <p>Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: <a href="https://www.patreon.com/mz4250">https://www.patreon.com/mz4250</a></p><p>Patrons have access to all my files in one place, a request board, as well ... | [
"dragon",
"cat",
"kitten"
] | Tabletop Miniatures > Characters & Monsters | [
"341549/images/image_1_compressed.jpg"
] | [
"341549/stls/Tiacat presupported.stl",
"341549/stls/Tiacat.stl"
] | CC-BY | https://www.printables.com/model/341549 | data_0035.tar |
41937 | Tiamat | <p>Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here:<br/>
<a href="https://www.patreon.com/mz4250">https://www.patreon.com/mz4250</a></p>
<p>Patrons have access to all my files in one place, a request board, as ... | [
"dragon",
"goddess"
] | Toys & Games > Board Games | [
"41937/images/image_1_compressed.jpg",
"41937/images/image_2_compressed.jpg"
] | [
"41937/stls/gargantuan-creature-marker.stl",
"41937/stls/Tiamat Updated BLACK HEAD presupported.stl",
"41937/stls/Tiamat Updated BLACK NECK presupported.stl",
"41937/stls/Tiamat Updated BLUE and WHITE NECKS presupported.stl",
"41937/stls/Tiamat Updated BLUE HEAD presupported.stl",
"41937/stls/Tiamat Updat... | CC-BY | https://www.printables.com/model/41937 | data_0035.tar |
300157 | Tic Tac Gun | Tic Tac gun powered by elastic | Download free 3D printable STL models | [
"gun",
"rubberbandgun",
"tictac",
"tictacgun"
] | Toys & Games > Other Toys & Games | [
"300157/images/image_1_compressed.jpg",
"300157/images/image_2_compressed.jpg",
"300157/images/image_3_compressed.jpg",
"300157/images/image_4_compressed.jpg",
"300157/images/image_5_compressed.jpg"
] | [
"300157/stls/Right_Side__M3_Nut_V2.stl",
"300157/stls/TTG_LEFT_RB_V2.stl",
"300157/stls/TTG_RB_Firing_Pin.stl",
"300157/stls/TTG_RB_TRIGGER.stl",
"300157/stls/TTG_RIGHT_RB.stl"
] | CC0 | https://www.printables.com/model/300157 | data_0036.tar |
1162047 | Tic Tac Gun (Compliant mechanism) | <p><strong>Tic Tac Gun thing:</strong></p><figure class="image"><img src="https://media.printables.com/media/prints/1162047/rich_content/17ff1fd1-7ac8-4f0c-b1d6-e7261ab821bd/20250125_1707441.gif#%7B%22uuid%22%3A%220ad0cf58-b398-4c81-afd1-98933ff5cfc4%22%2C%22w%22%3A960%2C%22h%22%3A540%7D"></figure><p><strong>Why i made... | [
"toy",
"springs",
"fidgettoy",
"spring",
"springloaded",
"fun",
"gun",
"pla",
"petg",
"candy",
"shotgun",
"compliant",
"flat",
"sniper",
"compliantmechanism",
"compliantmechanisms",
"flinger",
"springy",
"tictac",
"candies"
] | Gadgets > Other Gadgets | [
"1162047/images/image_1_compressed.jpg",
"1162047/images/image_2_compressed.jpg",
"1162047/images/image_3_compressed.jpg"
] | [
"1162047/stls/CPM_TICTACPETG_V1.stl",
"1162047/stls/CPM_TICTACPLA_V1.stl"
] | CC-BY | https://www.printables.com/model/1162047 | data_0036.tar |
157589 | Tic Tac Gun V2 Rubber Band Edition without text | <p>I used Blender to remove text from the parts that had it. I've included the original files from the model in case anyone wanted to mix and match parts or if they want to start from scratch. You can read stuff from the original Tic Tac Gun Rubber Band Edition for information about it.</p><p>TTG_LEFT_RB_V2.stl - The l... | [
"articulated",
"gun",
"tray",
"thingiverse",
"rubberband",
"rubberbandgun",
"gundam",
"tictac",
"3dtictactoe",
"tictacgun",
"tictacgunrubberband",
"tictacgunv2",
"ttgv2rb"
] | Toys & Games > Other Toys & Games | [
"157589/images/image_1_compressed.jpg"
] | [
"157589/stls/TTG_LEFT_RB_V2.stl",
"157589/stls/TTG_LEFT_RB_V2_NO_TEXT.stl",
"157589/stls/TTG_RB_FIRING_PIN.stl",
"157589/stls/TTG_RB_FIRING_PIN_NO_TEXT.stl",
"157589/stls/TTG_RB_TRIGGER.stl",
"157589/stls/TTG_RIGHT_RB.stl",
"157589/stls/TTG_RIGHT_RB_M3.stl"
] | CC-BY | https://www.printables.com/model/157589 | data_0036.tar |
131087 | Tic Tac Toe | Basic Tic Tac Toe game. ENJOY! | Download free 3D printable STL models | [
"game",
"board",
"toe",
"tac",
"tic"
] | Toys & Games > Board Games | [
"131087/images/image_1_compressed.jpg",
"131087/images/image_2_compressed.jpg"
] | [
"131087/stls/main board.stl",
"131087/stls/O.stl",
"131087/stls/X.stl"
] | CC0 | https://www.printables.com/model/131087 | data_0036.tar |
1487315 | Tic Tac Toe Game – Modern XO Board Set | <p>Enjoy a fresh and modern take on the classic <strong>Tic Tac Toe (XO) game</strong> with this fully 3D-printable set. Designed with clean geometry and precise fit, this model prints easily on most 3D printers and produces a durable, sleek game board perfect for kids and adults.</p><p>This digital download includes a... | [
"puzzle",
"game",
"toys",
"diy",
"kids",
"fun",
"education",
"storage",
"boardgame",
"3dprinter",
"easyprint",
"family",
"unique",
"puzzlegame",
"classicgaming",
"giftideas",
"toysandgames"
] | Toys & Games > Board Games | [
"1487315/images/image_1_compressed.jpg",
"1487315/images/image_2_compressed.jpg",
"1487315/images/image_3_compressed.jpg"
] | [
"1487315/stls/O.stl",
"1487315/stls/plan.stl",
"1487315/stls/X.stl"
] | CC-BY | https://www.printables.com/model/1487315 | data_0036.tar |
1012907 | Tic Tac Twist | <figure class="image"><img src="https://media.printables.com/media/prints/1012907/rich_content/b31f1b62-fc0b-422f-884b-36bec6451902/tictactwist2.gif#%7B%22uuid%22%3A%221aa998a0-f4de-40b6-ae19-723b30883b76%22%2C%22w%22%3A640%2C%22h%22%3A480%7D"></figure><p> </p><p><a href="https://makerworld.com/en/models/707175">A... | [
"tictactoe",
"tictactoegame"
] | Toys & Games > Other Toys & Games | [
"1012907/images/image_1_compressed.jpg",
"1012907/images/image_2_compressed.jpg",
"1012907/images/image_3_compressed.jpg",
"1012907/images/image_4_compressed.jpg",
"1012907/images/image_5_compressed.jpg"
] | [
"1012907/stls/24-272-3Gewinnt.stl",
"1012907/stls/24-272-TicTacToe-OUTguides.stl",
"1012907/stls/24-272-VierGewinnt-3x3-0.25clearance.stl",
"1012907/stls/24-272-VierGewinnt-Polar5-4.stl"
] | CC0 | https://www.printables.com/model/1012907 | data_0036.tar |
1213626 | Tic-Tac-Toe 3D – Board Game with Storage Box | <p><strong>Other games:</strong></p><ul><li><strong>BOUNCING CONNECT - 4 : </strong><a href="https://www.printables.com/model/1239325-bouncing-connect-4-board-game-with-storage-box">https://www.printables.com/model/1239325-bouncing-connect-4-board-game-with-storage-box</a></li><li><strong>GRAVITY DROP CONNECT - 4 : </s... | [
"puzzle",
"game",
"games",
"storage",
"boardgames",
"storagebox",
"boardgame",
"tictactoe",
"travelgame",
"tris",
"stategy"
] | Toys & Games > Board Games | [
"1213626/images/image_1_compressed.jpg"
] | [
"1213626/stls/Board.stl",
"1213626/stls/Coperchio.stl",
"1213626/stls/Shape1.stl",
"1213626/stls/Shape2.stl"
] | CC-BY | https://www.printables.com/model/1213626 | data_0036.tar |
912107 | Tick B-gone | <p>Introducing the Tick-b-gone Keyring Tool, a compact and efficient 3D printable tick removal tool designed for your keyring. This innovative tool combines practicality with convenience, ensuring you're always prepared to safely and effectively remove ticks from pets and humans alike. It features a precisely engineere... | [
"tool",
"hiking",
"pets",
"tick",
"remover"
] | Healthcare > Medical Tools | [
"912107/images/image_1_compressed.jpg",
"912107/images/image_2_compressed.jpg"
] | [
"912107/stls/Tick.stl"
] | GPL2.0 | https://www.printables.com/model/912107 | data_0036.tar |
920174 | Tick removal keyring | <p>A simple small tick removal keyring.</p><p>This came about after a team meeting, 2 of our team had recently had tick bites (we work outdoors in Scotland) I mentioned I'd seen a simple removal keyring & could make. I couldn't find the one I made & used sucessfully a few years ago so I designed my own, printed... | [
"tool",
"hiking",
"handy",
"backpack",
"removal",
"outdoors",
"tick",
"camp",
"caming"
] | Gadgets > Other Gadgets | [
"920174/images/image_1_compressed.jpg",
"920174/images/image_2_compressed.jpg"
] | [
"920174/stls/tick removal solid.stl"
] | CC-BY | https://www.printables.com/model/920174 | data_0036.tar |
873904 | Tick removal tool | <p>Tick removal tool</p><p>3 different sizes</p><p>Print in place and fast</p><p>100% infill</p><p>PLA, PETG</p> | [
"tool",
"removal",
"tick"
] | Healthcare > Home Medical Tools | [
"873904/images/image_1_compressed.jpg",
"873904/images/image_2_compressed.jpg"
] | [
"873904/stls/tick L.stl",
"873904/stls/tick M.stl",
"873904/stls/Tick S.stl"
] | CC0 | https://www.printables.com/model/873904 | data_0036.tar |
153838 | Tick remover | <p>Print in the same orientation as the second image. I used high quality(0.12) for this print and it worked out very well and printed fast. Bed adhesion for such a small part should not be any problem.</p><p>I'm looking forward to seeing your prints!</p> | [
"tool",
"tick",
"remover"
] | Healthcare > Home Medical Tools | [
"153838/images/image_1_compressed.jpg",
"153838/images/image_2_compressed.jpg"
] | [
"153838/stls/Tick remover.stl"
] | CC0 | https://www.printables.com/model/153838 | data_0036.tar |
537549 | Tick Remover for Keychain remixed | <h4>UPDATED V4 (5/31/2024)</h4><p>I add a new version with very slightly softened shape on the inside of the “catching” part, to make it even sharper where it matters with very low layer printing height. Please read the recommended print settings for the best result.</p><p> </p><h3>DESCRIPTION</h3><p>I found a tic... | [
"keychain",
"ticks",
"keychaintool"
] | Healthcare > Home Medical Tools | [
"537549/images/image_1_compressed.jpg",
"537549/images/image_2_compressed.jpg",
"537549/images/image_3_compressed.jpg"
] | [
"537549/stls/Keychain Tick Remover v2.stl",
"537549/stls/Keychain Tick Remover v4.stl",
"537549/stls/Keychain Ticks Remover v3.stl"
] | CC0 | https://www.printables.com/model/537549 | data_0036.tar |
1207454 | Tick twist remover | <p>Remove a tick by sliding the remover under the tick head and pulling it out with a twisting motion.<br><br>PETG is a suitable option.</p> | [
"tick",
"remover"
] | Sports & Outdoor > Outdoor Sports | [
"1207454/images/image_1_compressed.jpg",
"1207454/images/image_2_compressed.jpg",
"1207454/images/image_3_compressed.jpg"
] | [
"1207454/stls/tick_remover.stl"
] | CC0 | https://www.printables.com/model/1207454 | data_0036.tar |
367232 | Ticket to Ride America Train Organizer | <p>An improved version of the organiser by <a href="https://www.printables.com/social/194226-bencolt45">@bencolt45</a></p><blockquote><p>The trays are designed to stack on top of each other in the sections in the box already provided so that they reach just below the placement of the folded-up game board and the print-... | [
"organiser",
"boardgameaccessories",
"boardgameorganizer",
"tickettoride"
] | Toys & Games > Board Games | [
"367232/images/image_1_compressed.jpg",
"367232/images/image_10_compressed.jpg",
"367232/images/image_2_compressed.jpg",
"367232/images/image_3_compressed.jpg",
"367232/images/image_4_compressed.jpg",
"367232/images/image_5_compressed.jpg",
"367232/images/image_6_compressed.jpg",
"367232/images/image_... | [
"367232/stls/america_bottom_tray_tomjn_v6.stl",
"367232/stls/america_middle_top_trays_tomjn_v6.stl"
] | CC-BY | https://www.printables.com/model/367232 | data_0036.tar |
212097 | Ticket to Ride train | <p>When I printed the original on my Artillery Sidewinder X1, the base touching the print bed was just too small and the trains would be tipped over. So I simply increased the part touching the printbed. I added some area touching the print bed between the wheels and this allowed me to print the trains succesfully</p><... | [
"thingiverse",
"tickettoride"
] | Toys & Games > Other Toys & Games | [
"212097/images/image_1_compressed.jpg"
] | [
"212097/stls/Train_3.stl"
] | CC-BY | https://www.printables.com/model/212097 | data_0036.tar |
143259 | Ticket to Ride: Europe Card Tray |
<p>Remixed to hold the larger cards for ticket to ride. The cards are a tight fit, if you have a slightly bigger buildplate, print at 101%.</p>
<p>If you like my creations, and want to show me some love or give me a tip, you could always buy me a coffee!</p>
<p>And here's the tinkercad link:
<a href="https://www.ti... | [
"boardgame",
"thingiverse",
"tickettoride"
] | Toys & Games > Outdoor Toys | [
"143259/images/image_1_compressed.jpg",
"143259/images/image_2_compressed.jpg",
"143259/images/image_3_compressed.jpg",
"143259/images/image_4_compressed.jpg"
] | [
"143259/stls/large_display_Surprising_Fulffy-Wolt1_143259.stl",
"143259/stls/Surprising_Fulffy-Wolt.stl",
"143259/stls/Surprising_Fulffy-Wolt1.stl",
"143259/stls/Surprising_Fulffy-Wolt2.stl",
"143259/stls/TicketToRideUsa.stl"
] | CC-BY | https://www.printables.com/model/143259 | data_0036.tar |
333426 | TicTac Shooter | <p>For Sale here: https://atlaslabs3d.com/</p><p>"Elite" version of this model with many fixes, upgrades and features is available here:<br>https://cults3d.com/en/3d-model/game/ttg2-a-better-box-connection</p><p>Loading mechanism was redesigned for more reliable loading and firing.<br>a "Set" window on the left side wa... | [
"toy",
"gun",
"candy",
"shooter",
"sweet",
"tac",
"tic",
"tictac",
"ttg2"
] | Toys & Games > Other Toys & Games | [
"333426/images/image_1_compressed.jpg",
"333426/images/image_10_compressed.jpg",
"333426/images/image_11_compressed.jpg",
"333426/images/image_12_compressed.jpg",
"333426/images/image_13_compressed.jpg",
"333426/images/image_14_compressed.jpg",
"333426/images/image_15_compressed.jpg",
"333426/images/i... | [
"333426/stls/MAIN_-_TTG2-4mm-Spring_Pen.stl",
"333426/stls/MAIN_-_TTG2-LEFT.stl",
"333426/stls/MAIN_-_TTG2-RIGHT.stl",
"333426/stls/MAIN_-_TTG2_Trigger.stl",
"333426/stls/OPTIONAL_-_Printable_TicTac_Warning_might_be_a_choking_Hazard.stl",
"333426/stls/OPTIONAL_-_TESTFILE-Universal_4-8mm_Spring.stl",
"33... | CC-BY | https://www.printables.com/model/333426 | data_0036.tar |
1359738 | Tide Pod Safe - Customizable Small Form Print-in-Place | <p>Do you need a way to keep your most valuable possession on your person and literally <strong>SAFE</strong>?Introducing the Multi-modal TidePod Safe, a custom version of my new customizable mini safe model fits a standard key chain ring.</p><p>The safe door and body are an integral print-in-place assembly and do not ... | [
"meme",
"storage",
"hinge",
"printinplace",
"child",
"drugs",
"tidepods",
"tidepod"
] | Fashion > Other Fashion Accessories | [
"1359738/images/image_1_compressed.jpg",
"1359738/images/image_10_compressed.jpg",
"1359738/images/image_2_compressed.jpg",
"1359738/images/image_3_compressed.jpg",
"1359738/images/image_4_compressed.jpg",
"1359738/images/image_5_compressed.jpg",
"1359738/images/image_6_compressed.jpg",
"1359738/image... | [
"1359738/stls/Lock Bar.stl",
"1359738/stls/Safe Design Chip SVG PrusaSlicerCustomizer.stl",
"1359738/stls/Safe Design Chip Text PrusaSlicer Customizer.stl",
"1359738/stls/Safe without Design.stl",
"1359738/stls/Tide Pod Safe.stl",
"1359738/stls/TidePod Design Chip Base.stl",
"1359738/stls/TidePod Design... | CC-BY | https://www.printables.com/model/1359738 | data_0036.tar |
859593 | Tie Clip | <p>I have included two versions, one with a diamond shape on the front, and one with nothing on the front. I also put the fusion 360 file on here too if you would like to remix!</p> | [
"holder",
"clip",
"tie",
"necktie"
] | Fashion > Other Fashion Accessories | [
"859593/images/image_1_compressed.jpg",
"859593/images/image_2_compressed.jpg"
] | [
"859593/stls/tie clip v1.stl",
"859593/stls/tie clip v2.stl"
] | CC-BY | https://www.printables.com/model/859593 | data_0036.tar |
394016 | Tie Fighter DIY lego inspired stand | <p>I really like the original model, wanted to add it to my collection, so i decided to make a stand for it.</p><p>It is <strong>heavily inspired</strong> by the <strong>LEGO</strong> starwars helmets, more precisely the stand that they rests on. Wanted something similar to fit in.</p><h3><strong>added files for:</stro... | [
"starwars",
"stand",
"diy",
"lego",
"collection",
"tiefigter"
] | Costumes & Accessories > Props | [
"394016/images/image_1_compressed.jpg",
"394016/images/image_2_compressed.jpg",
"394016/images/image_3_compressed.jpg",
"394016/images/image_4_compressed.jpg",
"394016/images/image_5_compressed.jpg"
] | [
"394016/stls/Tie stand clean.stl",
"394016/stls/Tie stand with logo.stl",
"394016/stls/tie stand with modifiers.stl"
] | CC0 | https://www.printables.com/model/394016 | data_0036.tar |
177107 | TIE Fighter Google Home Mini |
<p>I remixed CaiotE's <a href="https://www.thingiverse.com/thing:5164614/files">Tie Fighter Echo Dot 3</a> model to work with the Google Home Mini, I used Pawpawpaw85's <a href="https://www.thingiverse.com/thing:2746443">Google Home Mini Slim Wall Mount</a> as inspiration for the clip.</p>
<p>Here's a clip of it "in... | [
"stand",
"googlehome",
"thingiverse",
"tiefighter",
"googlehomemini"
] | Hobby & Makers > Electronics | [
"177107/images/image_1_compressed.jpg",
"177107/images/image_2_compressed.jpg",
"177107/images/image_3_compressed.jpg",
"177107/images/image_4_compressed.jpg"
] | [
"177107/stls/TieFigher-GoogleHomeMIni.stl",
"177107/stls/Tie_Fighter_Echo_Dot_3_-_Left_Wing.stl",
"177107/stls/Tie_Fighter_Echo_Dot_3_-_Right_Wing.stl"
] | CC-BY | https://www.printables.com/model/177107 | data_0036.tar |
93459 | Tie Fighter Kit Card | <p>Pop off the pieces, I'll let you figure out how to put it together</p> | [
"starwars",
"tiefighter",
"kitcard"
] | Toys & Games > Building Toys | [
"93459/images/image_1_compressed.jpg"
] | [
"93459/stls/Tie fighter Kit card v4.stl"
] | CC-BY | https://www.printables.com/model/93459 | data_0036.tar |
23792 | Tie Fighter Pilot | <p>An old file from my Pepakura making days that I discovered in Pepakura Designer you can export to .OBJ and in "Windows 10 3DBuilder or 123Design" export to .STL. Unfortunately I don't have the skills yet to improve further on the model, but maybe someone out there would like to tidy it up. Please upload it back as a... | [
"thingiverse",
"tiefighterpilot"
] | Costumes & Accessories > Masks | [
"23792/images/image_1_compressed.jpg",
"23792/images/image_2_compressed.jpg"
] | [
"23792/stls/tie_fighter_pilot.stl"
] | CC-BY | https://www.printables.com/model/23792 | data_0036.tar |
492242 | Tie Hanger | <p>Tie Hanger!<br>VIDEO : https://www.youtube.com/watch?v=v7jP85ord78<br>TIP : https://paypal.me/hobbyeon</p><figure class="media"><oembed url="https://www.youtube.com/watch?v=v7jP85ord78"></oembed></figure> | [
"hanger",
"tie",
"rack",
"necktie"
] | Fashion > Men | [
"492242/images/image_1_compressed.jpg"
] | [
"492242/stls/tie_hanger.stl"
] | CC-BY | https://www.printables.com/model/492242 | data_0036.tar |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.