model_id stringlengths 1 7 | name stringlengths 2 210 | description stringlengths 0 253k | tags listlengths 0 494 | printables_category stringclasses 80
values | image_paths listlengths 0 289 | stl_paths listlengths 0 2.73k | license stringclasses 7
values | source stringlengths 34 40 | shard_file stringclasses 49
values |
|---|---|---|---|---|---|---|---|---|---|
174531 | Voron Trident C270 Mount | <p>Uses a M3x25 instead of the default pin.</p><p>You'll also need a M5x16 + nut and 2xM5x10 + 2x extrusion nuts</p><p>Mounted in the rear right corner for the highest distance possible</p> | [
"camera",
"holder",
"mount",
"adjustable",
"webcam",
"logitech",
"c270",
"corner",
"simple",
"trident",
"voron",
"rotate"
] | 3D Printers > Voron Parts & Upgrades | [
"174531/images/image_1_compressed.jpg",
"174531/images/image_2_compressed.jpg",
"174531/images/image_3_compressed.jpg"
] | [
"174531/stls/Webcam Drehteller Trident.stl",
"174531/stls/Webcam_Halter_Trident.stl"
] | CC-BY | https://www.printables.com/model/174531 | data_0038.tar |
413177 | Voron Trident fixed Nozzle Scubber | <p>The main goal for this mod is that I can clean the nozzle after I pause and resume the print, which is usually make small leakage of nozzle.</p><p>You need 2 heat insert for the brush holder, to fixed the holder on the frame mount. Another 2 heat insert for fixing the brush like I do, for which I also drill 2 3mm ho... | [
"trident",
"voron",
"nozzlecleaner",
"vorontrident"
] | 3D Printers > Accessories | [
"413177/images/image_1_compressed.jpg",
"413177/images/image_2_compressed.jpg",
"413177/images/image_3_compressed.jpg"
] | [
"413177/stls/Brush Holder.stl",
"413177/stls/Frame Mount.stl"
] | CC-BY | https://www.printables.com/model/413177 | data_0038.tar |
844489 | Voron Trident inverted electronics Z stepper mounts with cable route for camera | <p>This is kind of a kitbash of two different models put together. Mainly it's the Trident Inverted Electronics mod stepper mount with the cable channel from a Stevebuilds modified stepper mount. This works really well with spacers if you're not using steppers with integrated leadscrews and even without spacers t... | [
"trident",
"voron",
"ender3dent",
"invertedelectronics"
] | 3D Printers > Voron Parts & Upgrades | [
"844489/images/image_1_compressed.jpg",
"844489/images/image_2_compressed.jpg",
"844489/images/image_3_compressed.jpg"
] | [
"844489/stls/z_stepper_left_cable_cutout.stl",
"844489/stls/z_stepper_right_cable_cutout.stl"
] | GPL3.0 | https://www.printables.com/model/844489 | data_0038.tar |
883096 | Voron Trident inverted electronics "Slip in" - Brackets | <p>Sometimes it is a bit hard to place the black cover on the bottom of the printer. With these brackets, you have an easy way to slip the cover at the right position. Even with the CNC kit mounted.</p><p>Here is an example how to use it:</p><figure class="image image-style-align-center"><img src="https://media.printab... | [
"bracket",
"electronics",
"trident",
"inverted"
] | 3D Printers > Voron Parts & Upgrades | [
"883096/images/image_1_compressed.jpg"
] | [
"883096/stls/slip in brackets.stl"
] | CC0 | https://www.printables.com/model/883096 | data_0038.tar |
455437 | Voron Trident mesh skirts | <h3>Trident r1 Skirts with mesh</h3><p>CHANGELOG</p><ul><li>16.04.2023: <a href="https://github.com/VoronDesign/Voron-Trident/issues/117">I found a fault in the official CAD & .stl. Fixed in this update, refere to the issue I made.</a></li><li>16.04.2023: Initial release.</li></ul><p><a href="https://www.printables... | [
"mesh",
"trident",
"voron",
"skirts"
] | 3D Printers > Voron Parts & Upgrades | [
"455437/images/image_1_compressed.jpg"
] | [
"455437/stls/front_skirt_a_250.stl",
"455437/stls/front_skirt_a_300.stl",
"455437/stls/front_skirt_a_350.stl",
"455437/stls/front_skirt_b_250.stl",
"455437/stls/front_skirt_b_300.stl",
"455437/stls/front_skirt_b_350.stl",
"455437/stls/keystone_panel.stl",
"455437/stls/power_inlet_adamstech.stl",
"45... | GPL3.0 | https://www.printables.com/model/455437 | data_0038.tar |
460621 | Voron Trident PTFE Guides | <h3>Trident PTFE Guides</h3><p>Printing:</p><ul><li>Default voron settings, correct orientation, no supports needed!</li></ul><p>Bom:</p><ul><li>Only printed parts.</li></ul><p>Description:</p><ul><li>Made to guide the PTFE tube uniformly into the extruder, and avoid rubbing against the top panel.</li><li>One 90° versi... | [
"guide",
"ptfe",
"reversebowden",
"voron",
"lgx",
"lgxlite",
"trirdent"
] | 3D Printers > Voron Parts & Upgrades | [
"460621/images/image_1_compressed.jpg"
] | [
"460621/stls/105degrees.stl",
"460621/stls/90degrees.stl"
] | GPL3.0 | https://www.printables.com/model/460621 | data_0038.tar |
398937 | Voron Trident squash ball feet (replacements for the rubber feet) | <p>This is a replacement for the standard Voron Trident rubber feet with a two yellow dot (extra slow) squash balls. You've seen these for sure for other printers. I needed these to reduce vibrations and sound transmissions from the printer to the desk and floor.</p><p>You can replace your existing rubber feet without ... | [
"ball",
"feet",
"printerfeet",
"trident",
"voron",
"sqashball",
"vorontrident",
"sqash"
] | 3D Printers > Voron Parts & Upgrades | [
"398937/images/image_1_compressed.jpg",
"398937/images/image_2_compressed.jpg",
"398937/images/image_3_compressed.jpg",
"398937/images/image_4_compressed.jpg"
] | [
"398937/stls/Voron_Trident_squash_ball_feet_x4.stl"
] | CC0 | https://www.printables.com/model/398937 | data_0038.tar |
670769 | VORON Trident Stealth Skirts - Cheese Grater & Honeycomb Version 250 / 300 / 350 | <h3>UPDATE 05.05.2024:</h3><ul><li>Die CAD Dateien wurden auf den aktuellen Stand gebracht. </li><li>Die seitlichen Fan Cover, sowie der entsprechenden Fan Mount wurden minimal angepasst, da es hin und wieder Probleme mit den Lochabständen gab.</li><li>Der Displaymount für das PiTFT50 V2 / V2.1 wurden ergänzt</li>... | [
"mod",
"stealth",
"trident",
"voron",
"skirts",
"dragonburner",
"trident300",
"trident250",
"trident350",
"stealthskirts"
] | 3D Printers > Voron Parts & Upgrades | [
"670769/images/image_1_compressed.jpg",
"670769/images/image_10_compressed.jpg",
"670769/images/image_11_compressed.jpg",
"670769/images/image_12_compressed.jpg",
"670769/images/image_13_compressed.jpg",
"670769/images/image_14_compressed.jpg",
"670769/images/image_15_compressed.jpg",
"670769/images/i... | [
"670769/stls/5inch_amazon_screen_mount.stl",
"670769/stls/Bottom_panel_clip stealth skirts X2.stl",
"670769/stls/Bottom_panel_clip X2.stl",
"670769/stls/Bottom_panel_hinge X2.stl",
"670769/stls/Left Foot X2.stl",
"670769/stls/pitft50_V2.1_screen_mount.stl",
"670769/stls/Right Foot X2.stl",
"670769/stl... | GPL3.0 | https://www.printables.com/model/670769 | data_0038.tar |
460608 | Voron Trident Support | <h3>Trident PTFE support</h3><p>Since it's little space above the gantry in a Trident the bowden tube gets tangled up at times (esp in a 350mm). This helps guide the tube out and around the chamber as the gantry moves around.</p><p>Bom:</p><ul><li>1x M3x8 Bolt and M3 T-nut</li><li>1x M3 T-nut</li><li>1x M5x10 BHCS</li>... | [
"support",
"ptfe",
"reversebowden",
"trident",
"voron"
] | 3D Printers > Voron Parts & Upgrades | [
"460608/images/image_1_compressed.jpg"
] | [
"460608/stls/Arm-fluted.stl",
"460608/stls/Arm-pattern.stl",
"460608/stls/Arm-plain.stl",
"460608/stls/Mount.stl",
"460608/stls/Spacer.stl"
] | GPL3.0 | https://www.printables.com/model/460608 | data_0038.tar |
454583 | Voron Trident XY Gantry Conversion to MGN12H Rails | <p>I just modded the XY Joiner for the Gantry to fit MGN12H Rails instead of MGN9C.</p>
<p>WHY? Cause i don't have 9C Linear Rails in stock :)</p>
<p>Just the lower part has to be changed, upper joiners still stock.</p>
<h3>Print Settings</h3>
<p><strong>Supports:</strong></p>
<p>No</p>
<p class="detail-setting resolut... | [
"mgn12",
"thingiverse",
"trident",
"mgn12hcarriageblock",
"voron",
"vorontrident"
] | 3D Printers > Voron Parts & Upgrades | [
"454583/images/image_1_compressed.jpg",
"454583/images/image_2_compressed.jpg",
"454583/images/image_3_compressed.jpg"
] | [
"454583/stls/xy_joint_left_lower_MGN12HHHHHH.stl",
"454583/stls/xy_joint_right_lower_MGN12HHHHH.stl"
] | CC-BY | https://www.printables.com/model/454583 | data_0038.tar |
614093 | Voron Trident Y Alignment Guide 110MM | <p>THERE IS A NEW VARIANT AVAILABLE<br>https://www.printables.com/model/1028469-voron-trident-110mm-y-alignment-guide-jig-v2<br><br>A 110mm alignment guide for the VORON Trident.</p><p>Print 2 pieces. Material doesnt mater as long as its not TPU<br><br>Step File provided if you need to mod anything<br><br>GPL V3 Licens... | [] | 3D Printers > Voron Parts & Upgrades | [
"614093/images/image_1_compressed.jpg"
] | [
"614093/stls/2x AlignmentTool.stl"
] | GPL3.0 | https://www.printables.com/model/614093 | data_0038.tar |
947513 | Voron Trident Y Alignment Guide 110MM With Rail Space | <p>This is a remix of Takuya’s Y alignment-guide for the Voron Trident. It allows for you to keep your linear rails on when making adjustments to an existing build. Now you don’t need to remove the belts, x carriage, and rails.</p> | [
"tool",
"guide",
"tools",
"yaxis",
"trident"
] | 3D Printers > Voron Parts & Upgrades | [
"947513/images/image_1_compressed.jpg",
"947513/images/image_2_compressed.jpg"
] | [
"947513/stls/Alignment Tool Remix.stl"
] | GPL3.0 | https://www.printables.com/model/947513 | data_0038.tar |
1254673 | Voron Trident/2.4 Canopy tophat Box turtle mounts | <p> </p><p>I was asked by a few members in the BoxTurtle community to design some mounts for their Voron 2.4's which use this tophat design:</p><p><img src="https://media.printables.com/media/prints/1254673/rich_content/737754e0-27d5-41e0-aea8-cf326add7d2a/screenshot-2025-04-04-152625.png#%7B%22uuid%22%3A%22a40a98... | [
"box",
"turtle",
"mounts",
"tophat",
"trident",
"voron",
"voron24",
"boxturtle"
] | 3D Printers > Voron Parts & Upgrades | [
"1254673/images/image_1_compressed.jpg",
"1254673/images/image_2_compressed.jpg",
"1254673/images/image_3_compressed.jpg",
"1254673/images/image_4_compressed.jpg",
"1254673/images/image_5_compressed.jpg",
"1254673/images/image_6_compressed.jpg",
"1254673/images/image_7_compressed.jpg",
"1254673/images... | [
"1254673/stls/canopy_test_pieces_bundle.stl",
"1254673/stls/canopy_test_piece_10.5mm.stl",
"1254673/stls/canopy_test_piece_10mm.stl",
"1254673/stls/canopy_test_piece_9mm.stl"
] | CC-BY | https://www.printables.com/model/1254673 | data_0038.tar |
407822 | Voron V0 - Modesty Mesh | <p>These customizable mesh inserts do great job of hiding that rat's nest of wires in the back of your Voron V0. </p><p> </p><p>The multi-part STL can be split in the slicer, and custom infill settings applied to the inner body to create a mesh of your liking. </p><p> </p><p>The most up to d... | [
"mesh",
"voron",
"v0"
] | 3D Printers > Voron Parts & Upgrades | [
"407822/images/image_1_compressed.jpg",
"407822/images/image_2_compressed.jpg",
"407822/images/image_3_compressed.jpg"
] | [
"407822/stls/[a]_modesty_mesh_x2.stl"
] | GPL3.0 | https://www.printables.com/model/407822 | data_0038.tar |
501797 | Voron V0 1515 Frame Brace | <p>With just this corner brace, you can efficiently secure three corners in a right angle configuration.</p><p><strong>Print Settings:</strong></p><ul><li>Material: ABS</li><li>Layer height: 0.20mm</li><li>Supports: no</li><li>Perimeters: 3</li></ul><p><strong>My other Voron 0 mod parts:</strong><br><a href="https://ww... | [
"1515extrusion",
"voronv0"
] | 3D Printers > Voron Parts & Upgrades | [
"501797/images/image_1_compressed.jpg",
"501797/images/image_2_compressed.jpg",
"501797/images/image_3_compressed.jpg",
"501797/images/image_4_compressed.jpg"
] | [
"501797/stls/CornerBrace_single.stl",
"501797/stls/CornerBrace_triple.stl"
] | CC-BY | https://www.printables.com/model/501797 | data_0038.tar |
491293 | Voron V0 Auxiliary Fan Ducts | <h3>About <strong>Voron V0 Auxiliary Fan Ducts</strong></h3><p>These are auxiliary fan mounts for the v0, which you can use if you need extra cooling on your Speedbenchy journey.</p><p>The ducts can be easily installed after the Printer has already been fully assembled, as there are mounting options that don't require ... | [
"cooling",
"voron",
"vorondesign",
"voron01",
"v01",
"v0",
"rscs",
"voron02",
"v02"
] | 3D Printers > Voron Parts & Upgrades | [
"491293/images/image_1_compressed.jpg",
"491293/images/image_2_compressed.jpg"
] | [
"491293/stls/12032_R1_Bottom.stl",
"491293/stls/12032_R1_Bottom_Screw_Mount.stl",
"491293/stls/12032_R1_Bottom_Screw_Mount_Split_Left.stl",
"491293/stls/12032_R1_Bottom_Screw_Mount_Split_Right.stl",
"491293/stls/12032_R1_Clamp_Block.stl",
"491293/stls/12032_R1_Screw_Mount_Top_Left.stl",
"491293/stls/120... | GPL3.0 | https://www.printables.com/model/491293 | data_0038.tar |
435414 | Voron V0 Display (V0, V0.1, V0.2) Display Knob MMU, Dual Colour | <p>Extruded the hexagon so you can import the 3mf to print it in dual colours. </p><p>If you want to print without a multi material set up, I used the following <a href="https://docs.vorondesign.com/community/howto/mikhail/multi-colour-prints-with-a-single-nozzle.html">instructions</a></p><p>Post your makes so I c... | [
"multimaterial",
"mmu",
"voron",
"voronv0",
"voronv01",
"voronvzero",
"voronv02",
"v0display",
"vorondisplay",
"voronv0display",
"timmit99"
] | 3D Printers > Voron Parts & Upgrades | [
"435414/images/image_1_compressed.jpg",
"435414/images/image_2_compressed.jpg",
"435414/images/image_3_compressed.jpg",
"435414/images/image_4_compressed.jpg"
] | [
"435414/stls/V02 Display Knob.stl"
] | GPL3.0 | https://www.printables.com/model/435414 | data_0038.tar |
306742 | Voron V0 door hinges | <p>You will need a M3x10 screw to mount them at the 1515 extrusions,<br>and 2x pieces of 1.75mm filament to connect part a & b.</p> | [
"doorhinge",
"vorondesign",
"voron01",
"voron0"
] | 3D Printers > Voron Parts & Upgrades | [
"306742/images/image_1_compressed.jpg",
"306742/images/image_2_compressed.jpg",
"306742/images/image_3_compressed.jpg"
] | [
"306742/stls/Voron_V0_door_hinge_a_x2.stl",
"306742/stls/Voron_V0_door_hinge_b_x2.stl"
] | CC0 | https://www.printables.com/model/306742 | data_0038.tar |
450049 | Voron V0 Frame Brace | <p>In my search for a frame brace for my Voron V0, I couldn't find anything I liked. So, I created my own. This design is inspired heavily by the <a href="https://github.com/VzBoT3D/VzBoT-Vz235/blob/main/Assemblies%20%26%20STL/Frame/Frame%20brace.stl">VzBoT frame brace</a>.</p><p>Because the brace will inte... | [
"frame",
"brace",
"voron",
"v0"
] | 3D Printers > Voron Parts & Upgrades | [
"450049/images/image_1_compressed.jpg",
"450049/images/image_2_compressed.jpg",
"450049/images/image_3_compressed.jpg"
] | [
"450049/stls/Door Frame Brace.stl",
"450049/stls/Frame Brace.stl"
] | CC0 | https://www.printables.com/model/450049 | data_0038.tar |
859914 | Voron V0 Fysetc CNC Bed Stealth Front | <p>Wanting the Sweet CNC bed from Fysetc but also wanting that Sweet Stealth Look on the front with the Voron Logo from Maple Leaf Makers?<br><br>Well this might just be the mod for you.</p><p>after adapting the stealth front to cover up the CNC bed front and adding some locating points over the top and a fixing hole t... | [
"voron",
"vorondesign",
"voronmod",
"voron01",
"v01",
"v0",
"voron0",
"voron02",
"v02",
"v02r1"
] | 3D Printers > Voron Parts & Upgrades | [
"859914/images/image_1_compressed.jpg",
"859914/images/image_2_compressed.jpg",
"859914/images/image_3_compressed.jpg"
] | [
"859914/stls/Fysetc CNC Aluminium Bed Stealth front.stl",
"859914/stls/Voron Accent.stl",
"859914/stls/Voron Outter.stl"
] | GPL3.0 | https://www.printables.com/model/859914 | data_0038.tar |
451148 | Voron V0 Handle | <p>This is a handle for Voron V0, featuring a compact and sleek design.</p><p> </p><p><strong>Print settings: </strong></p><ul><li>Filament: ABS</li><li>Layer height: 0.20mm</li><li>Supports: No</li><li>Perimeters: 3</li></ul><p><strong>My other Voron 0 mod parts:</strong><br><a href="https://www.printables.c... | [
"voronv0",
"voronv01",
"voronv02"
] | 3D Printers > Voron Parts & Upgrades | [
"451148/images/image_1_compressed.jpg",
"451148/images/image_2_compressed.jpg",
"451148/images/image_3_compressed.jpg",
"451148/images/image_4_compressed.jpg",
"451148/images/image_5_compressed.jpg",
"451148/images/image_6_compressed.jpg"
] | [
"451148/stls/2-handle_1.stl",
"451148/stls/2-handle_2.stl",
"451148/stls/2.5-handle_1.stl",
"451148/stls/2.5-handle_2.stl",
"451148/stls/2.5_Angled_Handle.stl",
"451148/stls/2_Angled_Handle.stl",
"451148/stls/3-handle_1.stl",
"451148/stls/3-handle_2.stl",
"451148/stls/3_Angled_Handle.stl",
"451148... | CC-BY | https://www.printables.com/model/451148 | data_0038.tar |
536169 | Voron V0 Hinged Rear Panel Hex Mesh | <p><strong><em>Update 05-05-2026:</em></strong><br><em>added 3mf file with the optional honeycomb mesh, ready to load into your slicer and use your own settings.<br></em><br><br>I'm the lazy type of guy, hating to unscrew the panel clips every time i want to go into the electronics compartment. <br><br>And since i... | [
"hinge",
"panel"
] | 3D Printers > Voron Parts & Upgrades | [
"536169/images/image_1_compressed.jpg",
"536169/images/image_2_compressed.jpg",
"536169/images/image_3_compressed.jpg",
"536169/images/image_4_compressed.jpg",
"536169/images/image_5_compressed.jpg"
] | [
"536169/stls/Door_Latch_x2.stl",
"536169/stls/Handle_Hex_x1.stl",
"536169/stls/Rear_Panel_Hex_Mesh_hinged_x1.stl",
"536169/stls/Rear_Side_Bottom_Hinge_x1.stl",
"536169/stls/Rear_Side_Middle_Right_Hinge_x1.stl",
"536169/stls/voron-v0-hinged-rear-panel-hex-mesh-for-bambu-slicer.stl"
] | GPL3.0 | https://www.printables.com/model/536169 | data_0038.tar |
468776 | Voron V0 Kirigami Bed 4010 Blower | <p>I was struggling to get the chamber temps up in my Voron V0 and research led me to the use of bed fans to help circulate and distribute heat from the bed. There were not a lot of options for the Voron V0 with Kirigami bed so I decided to make an attempt designing something myself.</p><p>This design sandwiches ... | [] | 3D Printers > Voron Parts & Upgrades | [
"468776/images/image_1_compressed.jpg",
"468776/images/image_2_compressed.jpg",
"468776/images/image_3_compressed.jpg"
] | [
"468776/stls/Voron V0 Kirigami Bed 4010 Blower.stl"
] | GPL3.0 | https://www.printables.com/model/468776 | data_0038.tar |
408181 | Voron V0 Kirigami Stealth Bumper | <p> </p><p>Compatible with:</p><ul><li><a href="https://github.com/christophmuellerorg/voron_0_kirigami_bed">V0 Kirigami Bed</a></li><li>Salad Fork / Tri-Zero / Pandora's Box</li><li>anything with an extrusion to attach it to</li></ul><p><br> </p><p>Supports the <a href="https://github.com/tanaes/whopping_Vor... | [
"voron",
"v0",
"kirigami"
] | 3D Printers > Voron Parts & Upgrades | [
"408181/images/image_1_compressed.jpg",
"408181/images/image_2_compressed.jpg"
] | [
"408181/stls/logo_insert.stl",
"408181/stls/neopixel_button_carrier.stl",
"408181/stls/rainbow_barf_carrier.stl",
"408181/stls/[a]_main_body_antfarm.stl",
"408181/stls/[a]_main_body_kirigami.stl",
"408181/stls/[c]_neopixel_button_diffuser.stl",
"408181/stls/[c]_rainbow_barf_diffuser.stl"
] | GPL3.0 | https://www.printables.com/model/408181 | data_0038.tar |
131984 | Voron V0 LED rail | <p>This mod is a LED strip holder for the Voron V0 3D-printer. It should hold any 10mm wide LED strip, but I used it with RGB WS2812 Individually Addressable LEDs. I used a 30 LED/meter (low density) strip to fit 5 LED per side. To make the wiring easier, I put them in parallel (see the wiring diagram in the files).</p... | [
"thingiverse",
"voron"
] | 3D Printers > Voron Parts & Upgrades | [
"131984/images/image_1_compressed.jpg",
"131984/images/image_2_compressed.jpg",
"131984/images/image_3_compressed.jpg",
"131984/images/image_4_compressed.jpg"
] | [
"131984/stls/LED_ramp.stl"
] | LGPL | https://www.printables.com/model/131984 | data_0038.tar |
651390 | Voron V0 No-Drop Nuts for Makerbeam XL extrusions | <p>Zruncho's No-Drop Nut mod is very popular but only works for conventional 1515 extrusions, these have been redesigned for makerbeam XL extrusions. </p><p>There are 12 and 15 mm (15 mm is best for most uses) single nut versions as well as a double nut version with 15 mm spacing. More versions and parametric CAD ... | [
"1515",
"voron",
"makerbeamxl"
] | 3D Printers > Voron Parts & Upgrades | [
"651390/images/image_1_compressed.jpg"
] | [] | CC-BY | https://www.printables.com/model/651390 | data_0038.tar |
119853 | Voron V0 Plate Holder | <p>A small plate holder that has space for 6 Voron V0 flex plates.</p> | [
"holder",
"plate",
"voron",
"v0"
] | 3D Printers > Accessories | [
"119853/images/image_1_compressed.jpg",
"119853/images/image_2_compressed.jpg"
] | [
"119853/stls/voron_plate_stand.stl"
] | BSD | https://www.printables.com/model/119853 | data_0038.tar |
83468 | Voron v0 Serial Plate adaptation |
<p>The voron subreddit gives you a pre generated serial plate but it only works with the v1 and v2 vorons which isn't too handy for v0 users. I made this version of the serial plate that clips onto the lower grill of the printer either on the front or sides. There's a version with and without the logo.</p>
<h3> Print ... | [
"thingiverse",
"voron"
] | 3D Printers > Accessories | [
"83468/images/image_1_compressed.jpg",
"83468/images/image_2_compressed.jpg",
"83468/images/image_3_compressed.jpg"
] | [
"83468/stls/Serial_Plate_Voron_Logo.stl",
"83468/stls/Serial_Plate_Voron_NoLogo.stl"
] | CC-BY | https://www.printables.com/model/83468 | data_0038.tar |
481575 | Voron V0 Stealth Handles | <p><strong>V0 Stealth Handles</strong></p><p>Stealthy and stylish handles for your Voron V0</p><p>These handles replace the top center panel clips, and fasten with M3x12 screws.</p><p><br><strong>Printing</strong></p><p>The STL files are already oriented for printing. No supports are required. Yes, they pri... | [
"voron",
"v0",
"vzero"
] | 3D Printers > Voron Parts & Upgrades | [
"481575/images/image_1_compressed.jpg",
"481575/images/image_2_compressed.jpg",
"481575/images/image_3_compressed.jpg"
] | [
"481575/stls/handle_a.stl",
"481575/stls/handle_b.stl"
] | GPL3.0 | https://www.printables.com/model/481575 | data_0038.tar |
456042 | Voron V0 Thicker Thumb Nuts | <p>I felt that the original knobs were too thin and difficult to turn, so I remixed them to increase their thickness for easier gripping and turning. By designing the knobs to match the style of the Tensioner Knob and Display Knob, it also enhances the sense of unity.</p><p><strong>Print settings: </strong></p><ul... | [
"voronv0",
"voronv01",
"voronv02"
] | 3D Printers > Voron Parts & Upgrades | [
"456042/images/image_1_compressed.jpg",
"456042/images/image_2_compressed.jpg",
"456042/images/image_3_compressed.jpg"
] | [
"456042/stls/Remix_[a]_Thumb_Nut_x3.stl"
] | GPL3.0 | https://www.printables.com/model/456042 | data_0038.tar |
500513 | Voron V0 tiny recirculating carbon filter, MFNano Remix | <p>I was looking for a recirculating carbon filter for my Voron v0.2 printer but encountered some limitations with the Nevermore solution due to space constraints. Instead, I found the MFNano project by MappleLeafMakers, which seemed like a perfect fit with a few modifications. </p><p>The following are the goals I... | [
"filter",
"voron",
"voron02"
] | 3D Printers > Voron Parts & Upgrades | [
"500513/images/image_1_compressed.jpg",
"500513/images/image_2_compressed.jpg",
"500513/images/image_3_compressed.jpg",
"500513/images/image_4_compressed.jpg",
"500513/images/image_5_compressed.jpg",
"500513/images/image_6_compressed.jpg"
] | [
"500513/stls/MFNano_Remix_Cartridge_Body.stl",
"500513/stls/MFNano_Remix_Plenum_Body.stl",
"500513/stls/[a]_MFNano_Remix_Cartridge_Lid.stl",
"500513/stls/[a]_MFNano_Remix_Cartridge_Lid_Multibody_Logo.stl",
"500513/stls/[a]_MFNano_Remix_MagClip_Body_x2.stl",
"500513/stls/[a]_MFNano_Remix_Plenum_Lid.stl"
] | GPL3.0 | https://www.printables.com/model/500513 | data_0038.tar |
991234 | Voron v0 Umbilical Strain Relief v3 | <p>Heavily inspired by <a href="https://www.printables.com/model/577731-ptfe-less-umbilocal-strain-relief-for-voron-v02-0-">this model</a>, except the strain relief collar is attached to the Molex receptacle. The groove for the zip tie is deeper at 1.5mm without sacrificing any thickness on the back side.</p><p>The v3r... | [
"strainrelief",
"voron",
"umbilical",
"voron02"
] | 3D Printers > Voron Parts & Upgrades | [
"991234/images/image_1_compressed.jpg",
"991234/images/image_2_compressed.jpg",
"991234/images/image_3_compressed.jpg",
"991234/images/image_4_compressed.jpg"
] | [
"991234/stls/strain-relief-v3r1.stl",
"991234/stls/strain-relief-v3r2-flush.stl"
] | GPL3.0 | https://www.printables.com/model/991234 | data_0038.tar |
293606 | Voron V0 V0.1 V0.2 First Layer Calibration | <p>Model is 100mm x 100mm x 0.24mm high.</p><p>Easy to slice and print then adjust z on the fly giving you an ideal visual of your first layer.</p><p>Also good for running finger nail across for finer tuning of a smooth first layer.</p><p>(Also a nice easy print for a cheeky 10 Prusameters)</p><p>Post your makes with y... | [
"firstlayercalibration",
"corexy",
"voron",
"corexyprinter",
"firstlayertest",
"vorondesign",
"voron01",
"v01",
"v0",
"voron0",
"firstlayerclearance",
"v02",
"voronv02"
] | 3D Printers > Test Models | [
"293606/images/image_1_compressed.jpg"
] | [
"293606/stls/Z offset check.stl"
] | CC-BY | https://www.printables.com/model/293606 | data_0038.tar |
858786 | Voron V0 / V0.1 / V0.2 / R1 Kirigami Bed Brace + Fan | <p><strong>UPDATED!</strong> these have all been made stiffer!</p><p>Also please note that for the illustrative purposes the kirigami frame a brace are depicted upside-down.</p><p>After running the LDO Kirigami Bed Kit and loving it for over a year I found only one issue I was not quite happy with… The Rigidity!</p><p>... | [
"voron",
"vorondesign",
"voronmod",
"voron01",
"v01",
"v0",
"voron0",
"voron02",
"v02",
"v02r1"
] | 3D Printers > Voron Parts & Upgrades | [
"858786/images/image_1_compressed.jpg",
"858786/images/image_10_compressed.jpg",
"858786/images/image_2_compressed.jpg",
"858786/images/image_3_compressed.jpg",
"858786/images/image_4_compressed.jpg",
"858786/images/image_5_compressed.jpg",
"858786/images/image_6_compressed.jpg",
"858786/images/image_... | [
"858786/stls/Kirigami brace 3 x wagos with 2510 fan no PCB.stl",
"858786/stls/Kirigami brace 3 x wagos with 3010 Fan no PCB.stl",
"858786/stls/Kirigami brace 3 x wagos with 3010 Fan.stl",
"858786/stls/Kirigami brace 3 x wagos.stl",
"858786/stls/Kirigami brace 5 x wagos.stl",
"858786/stls/Kirigami brace 6 ... | GPL3.0 | https://www.printables.com/model/858786 | data_0038.tar |
109713 | Voron V0.1 Tophat Spacer with Hinges | <p>Voron V0.1 Tophat Spacer with Hinges<br>Makes the tophat higher, stiffer and adds a hinge.</p><p>Therefore its a lot easier to open the top and adds 20mm more space in the top for cable routing and higher Extruders.</p><p>I added now also a Version which is split for people with small printers who cant print the spa... | [
"lid",
"tophat",
"voron",
"vorondesign",
"voronmod",
"voron01",
"v0",
"voron0"
] | 3D Printers > Voron Parts & Upgrades | [
"109713/images/image_1_compressed.jpg",
"109713/images/image_2_compressed.jpg",
"109713/images/image_3_compressed.jpg",
"109713/images/image_4_compressed.jpg",
"109713/images/image_5_compressed.jpg",
"109713/images/image_6_compressed.jpg"
] | [
"109713/stls/Connector_front.stl",
"109713/stls/connector_rear.stl",
"109713/stls/Connector_side-v2_2x.stl",
"109713/stls/Connector_side_x2.stl",
"109713/stls/Hinge_panel_left.stl",
"109713/stls/Hinge_panel_right.stl",
"109713/stls/Tophat_spacer.stl",
"109713/stls/Tophat_spacer_front.stl",
"109713/s... | CC0 | https://www.printables.com/model/109713 | data_0038.tar |
317519 | Voron V0.1 V0.2 Klipper Expander Cable Duct | <p>Cable duct for Voron V0.1 or V0.2 that houses the Klipper Expander.</p><p>Klipper Expander allows you to add additional functionality to your V0 / V0.1 when using an SKR Mini or SKR Pio board. </p><p>I'm currently using it for another NeoPixel plug and a thermistor for the chamber. </p><p>It's mounted to t... | [
"cable",
"cables",
"cablemanagement",
"cabletie",
"cableholder",
"cableguide",
"cableorganizer",
"klipper",
"voron",
"vorondesign",
"voronmod",
"voron01",
"klipperexpander",
"klipperexpandermount",
"klipperexpensionboard",
"voron02",
"voronv02"
] | 3D Printers > Voron Parts & Upgrades | [
"317519/images/image_1_compressed.jpg",
"317519/images/image_2_compressed.jpg",
"317519/images/image_3_compressed.jpg"
] | [
"317519/stls/V0.1_Klipper_Expander_Base.stl",
"317519/stls/V0.1_Klipper_Expander_Top.stl"
] | CC-BY | https://www.printables.com/model/317519 | data_0038.tar |
107875 | Voron V0.1 Volumetric Flow Test (Superslicer, 0.4mm Nozzle) | <p>This print increases the volumetric flow by 5 cubic mm/s for every 6mm of Z-height, all the way up to 50 cubic mm/s. </p><p>Bring this into Superslicer (changing the printer setting to your printer if needed) and print it out. Be sure to stop the print when you see the extrusion stops flowing consistently, but... | [] | 3D Printers > Test Models | [
"107875/images/image_1_compressed.jpg"
] | [
"107875/stls/Volumetric Flow Test.stl"
] | CC-BY | https://www.printables.com/model/107875 | data_0038.tar |
153997 | Voron V0.1 / V0.2 rear panel with better cooling | <p>Dimensions are 212x248x3mm. You will need a big printer to print this because it didn't fit on MK3/MK4.</p><p>Update: Added version with Voron logo. Also added a version with the motor panel attached with 2 screws, the purpose is to better seal the chamber. This version needs 2x inserts and 2x M3x8-12 screws with BH... | [
"cooling",
"voron",
"v01",
"v0",
"voronv01",
"v02",
"voronv02"
] | 3D Printers > Voron Parts & Upgrades | [
"153997/images/image_1_compressed.jpg",
"153997/images/image_2_compressed.jpg"
] | [
"153997/stls/motor_panel.stl",
"153997/stls/rear_panel.stl"
] | GPL3.0 | https://www.printables.com/model/153997 | data_0038.tar |
533052 | Voron V0.2 (0 V0 0.2) rear panel honeycomb with mount holes | <p>Includes two versions with 6 and 3 mounting holes. 3 hole variant seemed necessary because I use foldable filament holder that need free space on the profile and 4 screws in total enough for solid mount.<br><br>Be careful with orientation of the panel. Front facing side goes to printed bed to have texture of your bu... | [
"panel",
"vorondesign",
"voronmod",
"voron01",
"voron02"
] | 3D Printers > Voron Parts & Upgrades | [
"533052/images/image_1_compressed.jpg",
"533052/images/image_2_compressed.jpg",
"533052/images/image_3_compressed.jpg"
] | [
"533052/stls/Rear_panel_3p.stl",
"533052/stls/Rear_panel_6p.stl"
] | GPL3.0 | https://www.printables.com/model/533052 | data_0038.tar |
365321 | Voron V0.2 - Display Faceplate - Multi-body | <p>I liked the hexagonal pattern on the new display front, but my overhangs never look great.</p><p>Massive kudos to the Voron team on the V0.2, that can be found <a href="https://vorondesign.com/voron0.2">here</a></p><p> </p><p>If you want to print without a multi material set up, I used the following <a href="ht... | [
"display",
"multimaterial",
"multicolor",
"multicolour",
"multipart",
"voron",
"displaycover",
"voronafterburner",
"voron2",
"vorondesign",
"voron24",
"vorontrident",
"voron01",
"voron02"
] | 3D Printers > Voron Parts & Upgrades | [
"365321/images/image_1_compressed.jpg",
"365321/images/image_2_compressed.jpg",
"365321/images/image_3_compressed.jpg"
] | [
"365321/stls/Display Faceplate Multibody.stl"
] | GPL3.0 | https://www.printables.com/model/365321 | data_0038.tar |
499851 | Voron V0.2 chamber thermistor mount | <p>I chance the mount from HenryA a little bit to fit on my v0.2 with the 1515 extrusions and a 3mm thermistor</p><p>the Thermistor fits very good on my print. if yours to tight you can open the hole a bit with a drill bit </p> | [] | 3D Printers > Voron Parts & Upgrades | [
"499851/images/image_1_compressed.jpg",
"499851/images/image_2_compressed.jpg",
"499851/images/image_3_compressed.jpg"
] | [
"499851/stls/chamber_thermistor_mount.stl"
] | CC0 | https://www.printables.com/model/499851 | data_0038.tar |
405522 | Voron V0.2 deck plate cover for Kirigami mode | <p>No support needed.</p> | [
"cover",
"voron",
"voronv02"
] | 3D Printers > Voron Parts & Upgrades | [
"405522/images/image_1_compressed.jpg"
] | [
"405522/stls/deck_plate_cover_V02.stl"
] | GPL3.0 | https://www.printables.com/model/405522 | data_0038.tar |
771537 | Voron V0.2 Door Latch | <p>Remix of Strong Snap Latch for Voron with 2020 extrusions.</p><p>My door kept opening during prints because of weak magnets in the handle. Replaces left side panel holder.</p><p> </p><p>Use M3x12 screws to assemble the Latch</p><p>Use M3x10 screw to mount the latch - replace middle panel holder on left side</p>... | [
"latch",
"zero",
"voron",
"voronzero",
"vorondoor"
] | 3D Printers > Voron Parts & Upgrades | [
"771537/images/image_1_compressed.jpg",
"771537/images/image_2_compressed.jpg",
"771537/images/image_3_compressed.jpg"
] | [
"771537/stls/DoorLatchBody.stl",
"771537/stls/DoorLatchBodyMultibody.stl",
"771537/stls/DoorLatchClip.stl",
"771537/stls/DoorLatchLever.stl"
] | GPL3.0 | https://www.printables.com/model/771537 | data_0038.tar |
364876 | Voron V0.2 Mini StealBurner Orbiter 2.0 | <p>I modified the new mini stealth burner to work with the orbiter 2.0 as well as all the released tool head mounts to work with the changes I made. One of the heat set inserts is really close to the wall of the hotend adapter so i added a small amount of material to make it work. its not great but I cant add anymore o... | [
"voron",
"toolhead",
"v01",
"orbiter2",
"v02",
"ministealthburner"
] | 3D Printers > Voron Parts & Upgrades | [
"364876/images/image_1_compressed.jpg",
"364876/images/image_2_compressed.jpg"
] | [
"364876/stls/FS_Creality_Spider_Hotend_Mount.stl",
"364876/stls/FS_Hotend_Mount_Dragon.stl",
"364876/stls/FS_Hotend_Mount_Dragonfly_BMO.stl",
"364876/stls/FS_Hotend_Mount_Drop_Effect_XG.stl",
"364876/stls/FS_Hotend_Mount_Revo_Voron.stl",
"364876/stls/Hotend_Mount_MicroSwiss_All_Metal.stl",
"364876/stls/... | CC0 | https://www.printables.com/model/364876 | data_0038.tar |
363207 | Voron V0.2 MMU Display Faceplate | <p>This remix of V0.2's display faceplate provides a flat front while keeping the nice honeycomb pattern. It can be printed with multi- and dual-color setups like the Prusa MMU, Mosaic Palette, Voron ERCF, … You can also first print the smaller pieces, switch filaments and continue with the main body on a regular print... | [
"display",
"mmu",
"printer",
"multicolor",
"multicolour",
"dualextrusion",
"dualcolor",
"voron"
] | 3D Printers > Voron Parts & Upgrades | [
"363207/images/image_1_compressed.jpg"
] | [
"363207/stls/V0.2MMU_Display Faceplate.stl"
] | GPL3.0 | https://www.printables.com/model/363207 | data_0038.tar |
392419 | Voron v0.2 OV5640 camera mont | <p>Voron v0.2 OV5640 camera mount. (100 degree AF on picture)</p><p>No supports needed. (Voron v0.1)</p><p>Depending on your bed adhesion a brim.</p> | [
"voron",
"voron02",
"v02",
"ov5640"
] | 3D Printers > Voron Parts & Upgrades | [
"392419/images/image_1_compressed.jpg",
"392419/images/image_2_compressed.jpg"
] | [
"392419/stls/Cam_mountOV5640_v0.2.stl"
] | CC0 | https://www.printables.com/model/392419 | data_0038.tar |
852953 | Voron V0.2 R1 Cam Lock Tool | <p>I created this tool as I just don't have my larger allen key's out near my V0 when i need to unlock / lock my idler cams.<br><br>for a while I used the stock tool that Voron made but I found it to be a bit cumbersome next to the hinge end of the front door.</p><p>the Voron Hex is large enough to fit between the thum... | [
"voron",
"vorondesign",
"voronmod",
"voron01",
"v01",
"v0",
"voron0",
"voron02",
"v02",
"v02r1"
] | 3D Printers > Voron Parts & Upgrades | [
"852953/images/image_1_compressed.jpg",
"852953/images/image_2_compressed.jpg",
"852953/images/image_3_compressed.jpg"
] | [
"852953/stls/V0.2R1 Cam Lock Tool.stl"
] | GPL3.0 | https://www.printables.com/model/852953 | data_0038.tar |
480672 | Voron v0.2 Rear Panel with Cooling holes | <p>Since the Pix's model was originally made for the v0.1's one-piece rear panel, it seems not suitable for replacing v0.2's two-piece rear panel; it feels little uncomfortable to do maintenance for me.</p><p> </p><p>So, I reduced the dimension to simply replace the v0.2's original “Rear_Panel_Bottom”.</p><p... | [] | 3D Printers > Voron Parts & Upgrades | [
"480672/images/image_1_compressed.jpg",
"480672/images/image_2_compressed.jpg"
] | [
"480672/stls/Voron v0.2 Rear Panel Bottom.stl"
] | GPL3.0 | https://www.printables.com/model/480672 | data_0038.tar |
409173 | Voron V0.2 Revised Enclosure Door Handle | <p>For no other reason than because I can, I decided to re-design the Voron V0.1/0.2 door handle for the enclosure. Mostly I wanted something that had more surface area for attachment with 3M VHB tape, so I made this one instead. Fits the same exact magnets as the standard Voron design handle.<br><br>Designed to be pri... | [
"corexy",
"voron",
"corexyprinter",
"voron01",
"voron02"
] | 3D Printers > Voron Parts & Upgrades | [
"409173/images/image_1_compressed.jpg",
"409173/images/image_2_compressed.jpg",
"409173/images/image_3_compressed.jpg",
"409173/images/image_4_compressed.jpg"
] | [
"409173/stls/Revised_Handle.stl"
] | CC-BY | https://www.printables.com/model/409173 | data_0038.tar |
448164 | Voron v0.2 Serial Plate adaptation | <p>The voron subreddit gives you a pre generated serial plate but it <strong>does not fit</strong> the v0.2 skirts. I modified the v0 STLs to fit the v0.2.</p><p>To make your own, you're going to need <a href="https://openscad.org/downloads.html">OpenSCAD.</a> Just download the files, open the scad file and... | [
"voron",
"v0"
] | 3D Printers > Voron Parts & Upgrades | [
"448164/images/image_1_compressed.jpg"
] | [
"448164/stls/Serial_Plate_Voron0.2_Logo.stl",
"448164/stls/Serial_Plate_Voron0.2_NoLogo.stl"
] | CC-BY | https://www.printables.com/model/448164 | data_0038.tar |
646070 | Voron V0.2 Side Panel | Introducing logo and design name brand. No modularity | [] | 3D Printers > Voron Parts & Upgrades | [
"646070/images/image_1_compressed.jpg",
"646070/images/image_2_compressed.jpg"
] | [
"646070/stls/V0.2 side panel.stl"
] | GPL3.0 | https://www.printables.com/model/646070 | data_0038.tar |
793276 | Voron v0.2 Toolhead Display Stand | <p>Display stand for Voron v0.2 toolhead. </p><p>You can secure it with just one screw, or achieve full fixation by adding x2 heat-set threaded inserts and x2 hex nuts.</p><figure class="image image-style-align-center image_resized" style="width:50%;"><img src="https://media.printables.com/media/prints/793276/rich... | [
"voron0",
"voron02"
] | 3D Printers > Voron Parts & Upgrades | [
"793276/images/image_1_compressed.jpg",
"793276/images/image_2_compressed.jpg",
"793276/images/image_3_compressed.jpg"
] | [
"793276/stls/V02Toolhead_stand_v1.1.stl"
] | GPL3.0 | https://www.printables.com/model/793276 | data_0038.tar |
661256 | Voron v0.2 Umbilical PCB Strain Relief and Molex Support | <p>This is a strain relief for the umbilical wiring harness on a Voron v0.2. I was running into an issue where I was losing connection in the Molex connector between the wiring harness and the PCB. During prints, the wiring harness was flexing this connection and at times it would cause the following error stopping my ... | [
"brace",
"support",
"pcb",
"strainrelief",
"umbilical",
"voronv0",
"formbot",
"voronv02"
] | 3D Printers > Voron Parts & Upgrades | [
"661256/images/image_1_compressed.jpg",
"661256/images/image_2_compressed.jpg",
"661256/images/image_3_compressed.jpg"
] | [
"661256/stls/voron_v0.2_umbilical_pcb_support.stl"
] | CC-BY | https://www.printables.com/model/661256 | data_0038.tar |
420550 | Voron V0.2 V0.2r1 Mini Stealthburner with Cat Ears | <p>Update:</p><ul><li>14/06/2023: Update with v0.2r1 part</li></ul><p> </p><p> </p><p>Just for funs :))</p> | [
"mini",
"ear",
"cat",
"ears",
"voron",
"catears",
"v0",
"stealthburner",
"catear",
"ministealthburner"
] | 3D Printers > Voron Parts & Upgrades | [
"420550/images/image_1_compressed.jpg",
"420550/images/image_2_compressed.jpg"
] | [
"420550/stls/MiniSB_MidBody_CatEar.stl",
"420550/stls/MiniSB_MidBody_CatEar_V0.2r1.stl"
] | CC0 | https://www.printables.com/model/420550 | data_0038.tar |
393536 | Voron V0.2 Z endstop combined with a lower guard to protect the area around the leadscrew | <p>This is a remix of the V0.1 lower bay guard with the stock V0.2 endstop. I made of course some stealthburner-like adaptions :-)</p><p>Integrated supports which will snap away with a tiny bit of force.</p><p>It used to be a very tight fit at the left side where the screw is going into the extrusion.<br>I made the lef... | [
"voron",
"voronv0",
"voronv01",
"voronv02"
] | 3D Printers > Voron Parts & Upgrades | [
"393536/images/image_1_compressed.jpg"
] | [
"393536/stls/V0.2_Lower_Guard_with_z_endstop_variant_V0_1.stl",
"393536/stls/V0.2_Lower_Guard_with_z_endstop_variant_V0_2.stl"
] | GPL3.0 | https://www.printables.com/model/393536 | data_0038.tar |
929946 | Voron V2 5015 bed fans for 2020 extrusion | <p>Since I'm moving to a hinged bed on my V2 350, the center gap will be occupied by the handle and my nevermore micro will no longer be of use. I wanted something to mount to the outside edges of the center bed extrusions, so they lift with the bed, so Ellis' fan mounts were out. I found another one from Datura on Pri... | [] | 3D Printers > Voron Parts & Upgrades | [
"929946/images/image_1_compressed.jpg",
"929946/images/image_2_compressed.jpg",
"929946/images/image_3_compressed.jpg",
"929946/images/image_4_compressed.jpg",
"929946/images/image_5_compressed.jpg",
"929946/images/image_6_compressed.jpg",
"929946/images/image_7_compressed.jpg",
"929946/images/image_8... | [
"929946/stls/5015BedFanMountBaseLeft v10.stl",
"929946/stls/5015BedFanMountBaseRight v10.stl",
"929946/stls/5015BedFanMountCover v10.stl"
] | GPL3.0 | https://www.printables.com/model/929946 | data_0038.tar |
220585 | Voron V2 BTT Smart Filament Sensor Mount | <p>I recently decided to install a BTT smart filament runout sensor on my Voron V2.4. I side mount my spool holder (front left of the machine) so I wanted a sensor inline with the bowden guide which would be easy to load, easy to access, and which would not interfere with my removable panels. I needed to also adjust th... | [
"filamentrunoutsens",
"filamentsensor",
"filamentrunout",
"runoutsensor",
"voron",
"bigtreetech",
"smartfilamentsensor",
"voron2",
"vorondesign",
"bttfilamentsensor",
"bttsmartfilament",
"voron24"
] | 3D Printers > Voron Parts & Upgrades | [
"220585/images/image_1_compressed.jpg",
"220585/images/image_2_compressed.jpg"
] | [
"220585/stls/Voron_V2_BTT_Backplate.stl",
"220585/stls/Voron_V2_BTT_BowdenGuide.stl",
"220585/stls/Voron_V2_BTT_SensorMount.stl",
"220585/stls/Voron_V2_BTT_SensorMount_Supported.stl"
] | GPL3.0 | https://www.printables.com/model/220585 | data_0038.tar |
358607 | Voron V2 Exhaust Fan Grill with Bowden/PG7/Thermistor | <p>A remix of my <a href="https://www.printables.com/model/358597-voron-v2-exhaust-fan-solid-plate-with-bowdenpg7the">solid plate</a>, for those who want to keep the rear exhaust housing in place.</p><p>STEP file provided if you want to make any changes.</p> | [
"v2",
"bowden",
"grill",
"exhaust",
"voron",
"thermistor",
"exhaustgrill",
"pg7"
] | 3D Printers > Voron Parts & Upgrades | [
"358607/images/image_1_compressed.jpg"
] | [
"358607/stls/V2_exhaust_grill_PG7_thermistor_Bowden.stl"
] | CC0 | https://www.printables.com/model/358607 | data_0038.tar |
167543 | Voron v2 Spool Holder (80mm) | Extended the stock Voron v2 spool holder to accept 80mm master spools from Paramount (or anyone else). | Download free 3D printable STL models | [
"spool",
"filament",
"master",
"masterspool",
"ptfe",
"80mm",
"voron",
"paramount"
] | 3D Printers > Voron Parts & Upgrades | [
"167543/images/image_1_compressed.jpg"
] | [
"167543/stls/spool.stl"
] | GPL3.0 | https://www.printables.com/model/167543 | data_0038.tar |
173635 | Voron v2.4 - Gantry Installation Hook (new Version!!) | <p>This is a gantry installation hook for voron 2.4. It fits to 2020 extrusions and helps lifting up the gantry to the frame easy. The hook is 12cm long. The lower part is 6mm thick and fits into the extrusion. The upper part has a 2cm wide hook which fits to the 2020 extrusion of the frame.</p><p>Just hook in the gant... | [
"voron",
"voron2",
"voron24",
"voronmod"
] | 3D Printers > Voron Parts & Upgrades | [
"173635/images/image_1_compressed.jpg",
"173635/images/image_2_compressed.jpg",
"173635/images/image_3_compressed.jpg",
"173635/images/image_4_compressed.jpg"
] | [
"173635/stls/gantry-installation-hook.stl",
"173635/stls/gantry-installation-hook_v2.stl"
] | CC-BY | https://www.printables.com/model/173635 | data_0038.tar |
86224 | Voron V2.4 300^3 C920 gantry 2020 mount | <p>To assemble you need a M3x8 Screw and an M3 Insert.</p><p>Update: new File “topRound” for those who wants to try it out. (request from comments)</p><p>Disassembly instruction: </p><p>https://www.ifixit.com/Guide/Logitech+C920+Webcam+Disassembly/115077</p><p></p> | [
"webcam",
"2020",
"c920",
"logitechc920",
"2020extrusion",
"voron"
] | 3D Printers > Voron Parts & Upgrades | [
"86224/images/image_1_compressed.jpg",
"86224/images/image_2_compressed.jpg",
"86224/images/image_3_compressed.jpg",
"86224/images/image_4_compressed.jpg",
"86224/images/image_5_compressed.jpg"
] | [
"86224/stls/downC920.stl",
"86224/stls/hookC920.stl",
"86224/stls/topC920.stl",
"86224/stls/topRound.stl"
] | GPL3.0 | https://www.printables.com/model/86224 | data_0038.tar |
527499 | Voron V2.4 PG7 Umbilical & Y Endstop Relocation with cable cutout - REMIX | <p>If you have an umbilical that goes all the way from the toolhead to the electronics bay and can't be bothered to redo the wire path, these cable cutouts let you just slip the existing wires into the endstop relocation mount. I've attached a 1.1mm version for diy cables using up to 20awg silicone insulated wire, 2mm ... | [
"endstop",
"relocation",
"voron",
"voron24",
"umbilical",
"canbus"
] | 3D Printers > Voron Parts & Upgrades | [
"527499/images/image_1_compressed.jpg",
"527499/images/image_2_compressed.jpg",
"527499/images/image_3_compressed.jpg"
] | [
"527499/stls/Umbilical_cable_PG7_1.1mm_cable_cutout.stl",
"527499/stls/Umbilical_cable_PG7_2mm_cable_cutout.stl",
"527499/stls/Umbilical_cable_PG7_5mm_cable_cutout.stl",
"527499/stls/Y bumper.stl"
] | CC-BY | https://www.printables.com/model/527499 | data_0038.tar |
508167 | Voron V2.4 PG7 Umbilical Rear-Mount Remix | <p>First i'd liked to say thank you to <a href="https://www.printables.com/de/model/363657-voron-v24-trident-rear-umbilical">Kotvic </a>for the great design and sharing the files.</p><p>For my taste i've cleared the front and added a PG7 thread. Also clearance for the endstop cable.</p> | [
"can",
"mod",
"voron",
"voron24",
"umbilical",
"canbus",
"pg7",
"voron24r2"
] | 3D Printers > Voron Parts & Upgrades | [
"508167/images/image_1_compressed.jpg",
"508167/images/image_2_compressed.jpg"
] | [
"508167/stls/Umbilical_cable_PG7.stl"
] | CC-BY | https://www.printables.com/model/508167 | data_0038.tar |
363657 | Voron V2.4 Rear umbilical | <p>This is my take for read umbilical modification for Voron V2.4 printers. It has clean design, easy instalation and everything is put together with M3 and M5 screws.</p><p>Print with standard Voron settings, parts are placed in right orientation for printing and for 10mm diameter cable or corrugated hose.</p><p>Insid... | [
"voron",
"voron24",
"vorontrident",
"umbilical",
"canbus"
] | 3D Printers > Voron Parts & Upgrades | [
"363657/images/image_1_compressed.jpg",
"363657/images/image_2_compressed.jpg",
"363657/images/image_3_compressed.jpg",
"363657/images/image_4_compressed.jpg",
"363657/images/image_5_compressed.jpg",
"363657/images/image_6_compressed.jpg"
] | [
"363657/stls/Cable clip.stl",
"363657/stls/Main body.stl",
"363657/stls/Optional_Chain_tilt_block.stl",
"363657/stls/Y bumper.stl"
] | CC-BY | https://www.printables.com/model/363657 | data_0038.tar |
85279 | Voron V2.4 Side skirt mod for noctua Fan NF-A6x25 | <p>This is a mod for my Voron 2.4</p>
Category: 3D Printer Parts | [
"noctua",
"thingiverse",
"voron"
] | 3D Printers > Voron Parts & Upgrades | [
"85279/images/image_1_compressed.jpg",
"85279/images/image_2_compressed.jpg",
"85279/images/image_3_compressed.jpg"
] | [
"85279/stls/Middle_Fan_Support_noctua.stl",
"85279/stls/Middle_Fan_Support_noctua_floor.stl"
] | GPL2.0 | https://www.printables.com/model/85279 | data_0038.tar |
1048451 | Voron Void Cube | <p>Voron Test Cube but now with added Void!<br><br>This Black Familiar will be your Perfect companion through this Halloween!</p> | [
"v2",
"trickortreat",
"trident",
"voron",
"vorondesign",
"voron24",
"v24",
"voron01",
"v01",
"v0",
"voron0",
"v24r2",
"voron02",
"v02",
"v02r1"
] | 3D Printers > Test Models | [
"1048451/images/image_1_compressed.jpg",
"1048451/images/image_2_compressed.jpg"
] | [
"1048451/stls/Voron Void Cube (feet).stl",
"1048451/stls/Voron Void Cube.stl"
] | GPL3.0 | https://www.printables.com/model/1048451 | data_0038.tar |
262136 | Voron X-carriage Pinda Mount | <p>Remix of ted.gaunts version.<br>Modified M8 Superpinda holder to clamp with an M3x12 SHCS and Heatset Insert,<br>reduce mounting hole size for using of an M8 Inductive Probe like Superpinda.<br><br>printed in eSun ABS+,<br>0.2mm Layerheight<br>0.4mm Nozzle<br>40% Infill<br><br>BOM:<br>3x M3x12(14) SHCS<br>1x M3x5x4 ... | [
"pinda",
"autobedleveling",
"inductivesensor",
"voron",
"inductiveprobe",
"superpinda"
] | 3D Printers > Voron Parts & Upgrades | [
"262136/images/image_1_compressed.jpg",
"262136/images/image_2_compressed.jpg"
] | [
"262136/stls/Voron X-carriage Pinda mount.stl"
] | CC0 | https://www.printables.com/model/262136 | data_0038.tar |
221447 | Voron Z-belt Slotted Cover | <p>As above, made a mod to the normal z-belt cover for the Voron 2.4 so you can run wires down into the electronics compartment. Great for hiding things like wiring from case lighting or a camera. Included mirrored .stls so you can use on either side.</p> | [
"voron",
"voron24",
"wirecover",
"zbelt"
] | 3D Printers > Voron Parts & Upgrades | [
"221447/images/image_1_compressed.jpg"
] | [
"221447/stls/z_belt_cover_a_slot.stl",
"221447/stls/z_belt_cover_b_slot.stl"
] | CC0 | https://www.printables.com/model/221447 | data_0038.tar |
373963 | Voron Z-Chain Guide Thermistor Mount | <p>Just a modification of the original Voron Z-Chain Guide to attach an additional chamber thermistor to your gantry.</p><p>The thermistor (e.g. a glass bead thermistor) is positioned inside the Z-guide and held in place with a small zip tie or wire. The thermistor cable can be hidden in the groove of the 2020 profile.... | [
"voron",
"thermistor",
"voron24"
] | 3D Printers > Accessories | [
"373963/images/image_1_compressed.jpg",
"373963/images/image_2_compressed.jpg",
"373963/images/image_3_compressed.jpg"
] | [
"373963/stls/Z-Chain-Guide_Thermistor-Mount.stl"
] | CC-BY | https://www.printables.com/model/373963 | data_0038.tar |
76887 | Voron Zero (V0VO) toolhead | <blockquote><h3><strong>Update 04/10/2021</strong></h3><p><strong>pre-support files</strong></p><h4><strong>added mount for NF-Crazy Volcano (Let's push it further )</strong></h4></blockquote><figure class="image"><img src="https://media.printables.com/media/prints/76887/rich_content/e69547f8-5800-48ea-b28a-01cbb9f07f3... | [
"extruder",
"speed",
"workshop",
"thingiverse",
"directdrive",
"corexy",
"voron"
] | 3D Printers > Voron Parts & Upgrades | [
"76887/images/image_1_compressed.jpg",
"76887/images/image_10_compressed.jpg",
"76887/images/image_11_compressed.jpg",
"76887/images/image_2_compressed.jpg",
"76887/images/image_3_compressed.jpg",
"76887/images/image_4_compressed.jpg",
"76887/images/image_5_compressed.jpg",
"76887/images/image_6_compr... | [
"76887/stls/Back_plate_with_support.stl",
"76887/stls/B_Front_Cover_V3.stl",
"76887/stls/B_V0V0_Back_Plate_V3.stl",
"76887/stls/B_V0V0_TENSION_bras_V3.stl",
"76887/stls/B_VOV0_main_V3.stl",
"76887/stls/Fan_Left_V2.stl",
"76887/stls/Fan_Right_V2.stl",
"76887/stls/hotend-mount_left_dragon.stl",
"76887... | CC-BY | https://www.printables.com/model/76887 | data_0038.tar |
382906 | Voron Zero Scraper | <p>Ideal layer height is at least 0.16 mm or less.</p> | [
"bed",
"hex",
"zero",
"spatula",
"voron",
"bedscraper"
] | 3D Printers > Voron Parts & Upgrades | [
"382906/images/image_1_compressed.jpg"
] | [
"382906/stls/Voron Zero HexScrapper.stl"
] | CC0 | https://www.printables.com/model/382906 | data_0038.tar |
247738 | voron-0 small handles | <figure class="media"><oembed url="https://www.youtube.com/watch?v=Ff-JzKsy1z8"></oembed></figure><h3><strong>Bom</strong></h3><ol><li>M3x12 BHCS/SHCS x8</li></ol><h3><strong>Step</strong></h3><ol><li>revise the thin in the ‘step’ file to fit your acrylic plate</li><li>print in 0.15mm layer (suggest)</li></ol> | [
"handles",
"voron01"
] | 3D Printers > Voron Parts & Upgrades | [
"247738/images/image_1_compressed.jpg",
"247738/images/image_2_compressed.jpg",
"247738/images/image_3_compressed.jpg",
"247738/images/image_4_compressed.jpg"
] | [
"247738/stls/Voron v0 handle 1mm.stl",
"247738/stls/Voron v0 handle 2mm.stl",
"247738/stls/Voron v0 handle 3mm.stl"
] | BSD | https://www.printables.com/model/247738 | data_0038.tar |
1062422 | Voronoi Alphabet Letters, Numbers and Symbols | <p>Individual Voronoi Fractured Alphabet Letters, Numbers and Symbols in STL format.</p> | [
"voronoi",
"symbols",
"alphabet",
"letters",
"numbers",
"alphabetletters",
"fractured"
] | Art & Design > Other Art & Designs | [
"1062422/images/image_1_compressed.jpg",
"1062422/images/image_2_compressed.jpg",
"1062422/images/image_3_compressed.jpg",
"1062422/images/image_4_compressed.jpg",
"1062422/images/image_5_compressed.jpg"
] | [
"1062422/stls/0.stl",
"1062422/stls/1.stl",
"1062422/stls/2.stl",
"1062422/stls/3.stl",
"1062422/stls/4.stl",
"1062422/stls/5.stl",
"1062422/stls/6.stl",
"1062422/stls/7.stl",
"1062422/stls/8.stl",
"1062422/stls/9.stl",
"1062422/stls/A.stl",
"1062422/stls/B.stl",
"1062422/stls/Bitcoin.stl",
... | CC0 | https://www.printables.com/model/1062422 | data_0038.tar |
728833 | Voronoi backpack/jacket/stuff hook | <p>Inspired by Heroclip by GearAid <a href="https://www.gearaid.com/pages/heroclip">https://www.gearaid.com/pages/heroclip</a> and Printables's Voronoi Patterns contest this hybrid gear clip allows bags, backpacks or jackets be hung on places, where they otherwise wouldn't.<br><br>Printed in <strong>PETG</strong>, with... | [
"holder",
"clip",
"gear",
"hiking",
"hang",
"backpack",
"backpackclip",
"jacket",
"edc",
"tablehook",
"backpacking",
"camp",
"tableclip",
"contraption",
"rucksack",
"backpackholder",
"gearclip",
"gearhook",
"heroclip",
"gearholder"
] | Hobby & Makers > Organizers | [
"728833/images/image_1_compressed.jpg",
"728833/images/image_2_compressed.jpg",
"728833/images/image_3_compressed.jpg",
"728833/images/image_4_compressed.jpg"
] | [
"728833/stls/voronoi-carabiner.stl",
"728833/stls/voronoi-paracordless.stl",
"728833/stls/voronoi-tablehook.stl"
] | CC-BY | https://www.printables.com/model/728833 | data_0038.tar |
130548 | Voronoi Ball |
<p>I modeled this ball using Blender and it looked like a cool sculpture to print.</p>
<p>Considering I printed this with an Ender 3 (Bowden Setup) and TPU, I think it turned out pretty good.</p>
<h3>Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Creality</p>
<p class="detail-setting printer"><strong>... | [
"ball",
"voronoi",
"tpu",
"thingiverse",
"organicshape",
"3dvoronoi"
] | Art & Design > Sculptures | [
"130548/images/image_1_compressed.jpg",
"130548/images/image_2_compressed.jpg"
] | [
"130548/stls/OrganicBall.stl"
] | CC-BY | https://www.printables.com/model/130548 | data_0038.tar |
719794 | Voronoi bathroom corner shelf | <p>Simple to print.</p><p>Two different tolerance available for mounting brackets.</p><p>If brackets are tight to insert heat Voronoi shelf using hair dryer/heat gun and insert the mounts, this gives a tight and rigid connection.</p><p>Refer images for best print orientation.</p> | [
"voronoi",
"bathroom",
"bathroomaccessories",
"voronoidesign",
"bathroomshelf"
] | Household > Bathroom | [
"719794/images/image_1_compressed.jpg",
"719794/images/image_2_compressed.jpg",
"719794/images/image_3_compressed.jpg",
"719794/images/image_4_compressed.jpg",
"719794/images/image_5_compressed.jpg",
"719794/images/image_6_compressed.jpg",
"719794/images/image_7_compressed.jpg",
"719794/images/image_8... | [
"719794/stls/Clamp L voronoi corner 0.1.stl",
"719794/stls/Clamp L voronoi corner 0.2.stl",
"719794/stls/Clamp R voronoi corner 0.1.stl",
"719794/stls/Clamp R voronoi corner 0.2.stl",
"719794/stls/Voronoi Corner shellf.stl"
] | CC-BY | https://www.printables.com/model/719794 | data_0038.tar |
489763 | VORONOI BIRD BATH & FEEDER V2 | <p><i><strong>To save material, the thickness of the outer wall was reduced.</strong></i><br><i><strong>The overhangs near the bottom were optimized.</strong></i><br><i><strong>The model was enlarged by 10%</strong></i></p><p><i><strong>have a nice day!</strong></i></p><p><i><strong>3D PRINTING SETTINGS</strong></i></p... | [
"bird",
"home",
"outdoor",
"greenhouse",
"outdoors",
"birdfeeder",
"homedecoration",
"outdoorgardening"
] | Household > Pets | [
"489763/images/image_1_compressed.jpg",
"489763/images/image_2_compressed.jpg",
"489763/images/image_3_compressed.jpg"
] | [
"489763/stls/Voronoi_Birdfeeder v7.stl"
] | GPL3.0 | https://www.printables.com/model/489763 | data_0038.tar |
135721 | Voronoi Bird Feeder |
<p>Voronoi style bird feeder for suet/fat balls.</p>
<p>Should hold 2-3 balls dependent on size, attached hat to body with string and hang.</p>
<p>Print as is with no supports, its a good overhang and retraction torture test.</p>
<p>The organic shape makes its easy for birds to hang on and feed.</p>
Category: Outd... | [
"voronoi",
"thingiverse",
"birdfeeder"
] | Household > Outdoor & Garden | [
"135721/images/image_1_compressed.jpg",
"135721/images/image_2_compressed.jpg",
"135721/images/image_3_compressed.jpg",
"135721/images/image_4_compressed.jpg",
"135721/images/image_5_compressed.jpg"
] | [
"135721/stls/feeder_hat.stl",
"135721/stls/Voronoi-Birdfeeder.stl"
] | CC-BY | https://www.printables.com/model/135721 | data_0038.tar |
48982 | Voronoi Bowl | <p>A voronoi-style bowl, can be used for decorations or holding larger objects. The bottom isn't flat, so I recommend slicing the bottom off in your slicer. The design does not require supports, but enabling them might achieve a better end result.</p> | [
"voronoi",
"bowl",
"thingiverse"
] | Household > Home Decor | [
"48982/images/image_1_compressed.jpg",
"48982/images/image_2_compressed.jpg",
"48982/images/image_3_compressed.jpg"
] | [
"48982/stls/voronoiBowl.stl"
] | CC0 | https://www.printables.com/model/48982 | data_0038.tar |
142695 | Voronoi Bunny | <p>I loved the little Meshmixer bunny so decided to give it a voronoi look - really happy with the result, prints without supports and is a real test for your temp and retraction settings. May need a small plane cut on the first few layers depending on model size. I printed this 15cm tall and had to slice 1... | [
"bunny",
"rabbit",
"voronoi"
] | Art & Design > Sculptures | [
"142695/images/image_1_compressed.jpg"
] | [
"142695/stls/rabbit.stl"
] | CC0 | https://www.printables.com/model/142695 | data_0038.tar |
13080 | Voronoi Cat Tea Light | <p>Lounging Cat altered with <a href="http://www.voronator.com/">http://www.voronator.com/</a> and tinkercad.<br/>
I needed to use the smaller file offered from voronator in order to transfer it to tinkercad and cut the hole in the bottom. A battery powered tea light will fit nicely through the bottom hole.</p>
<h3>Pr... | [
"lamp",
"cat",
"kitten",
"thingiverse",
"tealight",
"ledlamp"
] | Household > Home Decor | [
"13080/images/image_1_compressed.jpg",
"13080/images/image_2_compressed.jpg"
] | [
"13080/stls/tealightcat.stl"
] | CC-BY | https://www.printables.com/model/13080 | data_0038.tar |
734951 | Voronoi Chicken | <p>🐔✨ <strong>Elevate Your Space with the Voronoi Chicken 3D Model!</strong> ✨🌐</p><p>🔄 <strong>Printer-Friendly Charm:</strong></p><p>It's recommended to use PLA filament, and a touch of support for its nose and head ensures a flawless print</p><p>💡 <strong>Interactive Design:</strong><br>Engage in an interactive ... | [
"decoration",
"voronoi",
"chicken"
] | Household > Home Decor | [
"734951/images/image_1_compressed.jpg"
] | [
"734951/stls/VoronoiChicken.stl"
] | CC-BY | https://www.printables.com/model/734951 | data_0038.tar |
630963 | Voronoi Coaster | <p>Just a simple coaster. Enjoy</p> | [
"coaster",
"easyprint",
"bestcodes"
] | 3D Printers > Accessories | [
"630963/images/image_1_compressed.jpg",
"630963/images/image_2_compressed.jpg"
] | [
"630963/stls/Coaster coaster coaster.stl"
] | CC-BY | https://www.printables.com/model/630963 | data_0038.tar |
732353 | Voronoi Cute Stylized Dinosaur Toy | <p>Do not scale the model down because it results in thinner and weaker walls.</p><p>I've been printing it with hand drawn supports (tree type) on its belly and tail otherwise it ended up been noodles.</p> | [] | Toys & Games > Action Figures & Statues | [
"732353/images/image_1_compressed.jpg",
"732353/images/image_2_compressed.jpg"
] | [
"732353/stls/VORONOI_Dino.stl"
] | CC-BY | https://www.printables.com/model/732353 | data_0038.tar |
732195 | Voronoi Dragonfly | <p>The Voronoi patterns flash contest immediately made me think of insect wings, and so this dragonfly was born. This snap-fit model features posable ball-jointed wings and an elegant display stand.</p><p> </p><h4>Print Settings</h4><p>Print files are divided into Body, Wings, and Stand. Just print one of each fil... | [
"voronoi",
"articulated",
"desktoy",
"dragonfly",
"balljoint",
"posable"
] | Art & Design > Other Art & Designs | [
"732195/images/image_1_compressed.jpg",
"732195/images/image_2_compressed.jpg",
"732195/images/image_3_compressed.jpg",
"732195/images/image_4_compressed.jpg"
] | [
"732195/stls/dragonfly-body.stl",
"732195/stls/dragonfly-stand.stl",
"732195/stls/dragonfly-wings.stl"
] | CC-BY | https://www.printables.com/model/732195 | data_0038.tar |
119424 | Voronoi Easter Egg with Bunny Ears | <p>Voronoi Easter Egg with Bunny Ears</p> | [
"bunny",
"voronoi",
"easterbunny",
"easter",
"easteregg",
"egg",
"easterdesign"
] | Seasonal designs > Spring & Easter | [
"119424/images/image_1_compressed.jpg",
"119424/images/image_2_compressed.jpg",
"119424/images/image_3_compressed.jpg",
"119424/images/image_4_compressed.jpg",
"119424/images/image_5_compressed.jpg",
"119424/images/image_6_compressed.jpg"
] | [
"119424/stls/Voronoi Earster Egg with Bunny Ears - bottom Veronoi.stl",
"119424/stls/Voronoi Earster Egg with Bunny Ears - full Veronoi.stl",
"119424/stls/Voronoi Earster Egg with Bunny Ears - half Veronoi.stl",
"119424/stls/Voronoi Earster Egg with Bunny Ears - top Veronoi.stl"
] | CC-BY | https://www.printables.com/model/119424 | data_0038.tar |
734335 | Voronoi Egg | <p>Printing without bottom is difficult! <br>This is why I created one version with bottom!</p><p>Voronator is a online voronoi generator.</p><p>You can print this object in original size or bigger (scale it proportionally with your slicer),<br>smaller is not possible as parts get to fragil. The print is very deli... | [
"voronoi",
"easter",
"egg",
"ostern"
] | Art & Design > Sculptures | [
"734335/images/image_1_compressed.jpg",
"734335/images/image_2_compressed.jpg",
"734335/images/image_3_compressed.jpg"
] | [
"734335/stls/Voronoi-75mm egg-with bottom.stl",
"734335/stls/voronoi-75mm egg.stl"
] | CC-BY | https://www.printables.com/model/734335 | data_0038.tar |
729946 | Voronoi Gecko | <p>🦎✨ <strong>Dive into the World of Elegance with Our Voronoi Gecko 3D Model!</strong> ✨🌐</p><p>Unleash the captivating beauty of nature-inspired art with our Voronoi Gecko 3D model – a symphony of intricate design and geometric brilliance. This stunning sculpture breathes life into the concept of the voronoi patter... | [
"decoration",
"voronoi",
"gecko"
] | Household > Home Decor | [
"729946/images/image_1_compressed.jpg"
] | [
"729946/stls/VoronoiGecko.stl",
"729946/stls/VoronoiGeckoSmaller.stl"
] | CC-BY | https://www.printables.com/model/729946 | data_0038.tar |
730952 | Voronoi Head - helmet or headphone holder | [
"voronoi",
"headphoneholder",
"helmetstand"
] | Art & Design > Sculptures | [
"730952/images/image_1_compressed.jpg"
] | [
"730952/stls/Styro_Head_voro.stl"
] | CC-BY | https://www.printables.com/model/730952 | data_0038.tar | |
762025 | Voronoi heart gift box | <p>Cute voronoi heart-shaped gift box with flower. Ideal as Valentine's Day love gift box. </p><p>Used flower is resized model from author 4frika: <a href="https://www.thingiverse.com/thing:1440472">https://www.thingiverse.com/thing:1440472</a> .Thanks</p><p>Print the flower separately and glue onto the lid.</p><p... | [
"box",
"voronoi",
"gift",
"heart",
"valentine",
"voron",
"voroni"
] | Art & Design > Other Art & Designs | [
"762025/images/image_1_compressed.jpg",
"762025/images/image_2_compressed.jpg",
"762025/images/image_3_compressed.jpg"
] | [
"762025/stls/HeartBox.stl",
"762025/stls/HeartFlower.stl",
"762025/stls/HeartLid.stl",
"762025/stls/HeartLid_noflower.stl"
] | GPL2.0 | https://www.printables.com/model/762025 | data_0038.tar |
1171050 | Voronoi Lattice Benchy | <p>I upload one color benchy for resin printer recomended<br><br>no supports<br> </p> | [
"boat",
"voronoi",
"benchy",
"resin",
"resinprinter",
"voronidesign"
] | Toys & Games > Vehicles | [
"1171050/images/image_1_compressed.jpg",
"1171050/images/image_2_compressed.jpg"
] | [
"1171050/stls/Voronoi Lattice Benchy.stl"
] | GPL2.0 | https://www.printables.com/model/1171050 | data_0038.tar |
489328 | Voronoi like planter vase mode | generated with blender.
Will make more in the future. | Download free 3D printable STL models | [
"vase",
"planter",
"voronoi",
"golem",
"ezriel"
] | Household > Outdoor & Garden | [
"489328/images/image_1_compressed.jpg",
"489328/images/image_2_compressed.jpg"
] | [
"489328/stls/vase 1.stl"
] | GPL3.0 | https://www.printables.com/model/489328 | data_0038.tar |
129379 | Voronoi Love Hands | <p>Voronoi Love Hands</p><p> </p><p>I recommend upscaling it 120 percent or more </p> | [
"voronoi",
"hands",
"love",
"valentine",
"valentinesday",
"valentinesdaygifts",
"voronoidesign",
"lovers"
] | Art & Design > Other Art & Designs | [
"129379/images/image_1_compressed.jpg",
"129379/images/image_2_compressed.jpg",
"129379/images/image_3_compressed.jpg",
"129379/images/image_4_compressed.jpg"
] | [
"129379/stls/voronoi love test.stl"
] | CC0 | https://www.printables.com/model/129379 | data_0038.tar |
280310 | Voronoi orchid planter flower pot | <p>Following my other voronoi style design I created this planter. It has a nice looking voronoi pattern on sides. </p><p>There are two variants - one with thick ring support on the bottom and one without for easier scaling. First one is dedicated for orchids as they require some additional space on the bottom - s... | [
"pot",
"voronoi",
"modern",
"flowerpot",
"plants",
"pattern",
"orchid",
"indoorplanter"
] | Household > Home Decor | [
"280310/images/image_1_compressed.jpg",
"280310/images/image_2_compressed.jpg",
"280310/images/image_3_compressed.jpg",
"280310/images/image_4_compressed.jpg"
] | [
"280310/stls/planter orchid.stl",
"280310/stls/planter plain.stl"
] | CC-BY | https://www.printables.com/model/280310 | data_0038.tar |
710357 | Voronoi Pebble Coaster Desktop Mug Holder Surface Protector | <p>Voronoi desktop coaster, 10 centimeters in diameter. </p> | [
"coasters",
"design",
"voronoi",
"drink",
"coaster",
"voronoidesign",
"drinkholder",
"pebble",
"voronoistyle",
"style",
"coastersdrink"
] | Household > Office | [
"710357/images/image_1_compressed.jpg",
"710357/images/image_2_compressed.jpg"
] | [
"710357/stls/Voronoi Pebble Coaster.stl"
] | CC0 | https://www.printables.com/model/710357 | data_0038.tar |
137050 | Voronoi ring | <p><strong>I really like the voronoi designs, so I gave it a try and I created a voronoi ring. This ring is designed to be scaled to the size of your liking by scaling it in the slicer! for that reason, the inner dimension is 10mm so if you want a 15.8 mm ring you can scale it 158%.</strong></p><p> </p><p> </... | [
"ring",
"voronoi",
"fashion"
] | Fashion > Other Fashion Accessories | [
"137050/images/image_1_compressed.jpg"
] | [
"137050/stls/voronoi ring with smaller holes.stl",
"137050/stls/voronoi ring.stl"
] | CC-BY | https://www.printables.com/model/137050 | data_0038.tar |
734396 | Voronoi Rock Hand | <p>It's not as easy to print as most of the Voronoi models.</p><p>I've added some organic supports on the underside of the ring finger, which are included in the 3MF file that you can open in your Prusa slicer. You can print it without supports, but the result is better with them :)</p><figure class="image"><img src="h... | [
"rock",
"voronoi",
"hand"
] | Art & Design > Sculptures | [
"734396/images/image_1_compressed.jpg",
"734396/images/image_2_compressed.jpg",
"734396/images/image_3_compressed.jpg",
"734396/images/image_4_compressed.jpg"
] | [
"734396/stls/Voronoi Rock Hand - Fine.stl",
"734396/stls/Voronoi Rock Hand - Rough.stl"
] | CC-BY | https://www.printables.com/model/734396 | data_0038.tar |
374792 | Voronoi Screw Tray 20x8 cm | Much more easy to remember different screws.
Funny to use, good on photo. Avoid black.
No support, 13% fill. | Download free 3D printable STL models | [
"voronoi",
"tray",
"screw"
] | Hobby & Makers > Tools | [
"374792/images/image_1_compressed.jpg"
] | [
"374792/stls/voronoi-tray-20x8.stl"
] | CC-BY | https://www.printables.com/model/374792 | data_0038.tar |
136494 | Voronoi style turtle - thick pattern | <p>Can be scaled to any size and printed without supports but the model may need to have a plane cut of upto 2mm depending on the scale it is printed at. When viewing the sliced model, you need to see the majority of the first layer on your sheet. The model I have printed is 120mm long from head to tail and... | [
"model",
"seaturtle"
] | Art & Design > Sculptures | [
"136494/images/image_1_compressed.jpg"
] | [
"136494/stls/small turtle.stl"
] | CC0 | https://www.printables.com/model/136494 | data_0038.tar |
101064 | Voronoi Torture Test | <p>Push your printer to the next level with the Voronoi Torture test! This all-in-one print tests cooling, print speed, extrusion, bridging, and retraction in one print. Print away!</p><p> </p><p>Recommended Settings:</p><ul><li>0.1-0.2 mm layer height</li><li>PLA (Or other filament)</li><li>Fan @ 100%</li><li>No ... | [
"voronoi",
"retraction",
"torture",
"torturetest",
"overhang",
"retractiontest",
"overhangtorturetest"
] | 3D Printers > Test Models | [
"101064/images/image_1_compressed.jpg",
"101064/images/image_2_compressed.jpg"
] | [
"101064/stls/Voronoi Cube.stl"
] | GPL3.0 | https://www.printables.com/model/101064 | data_0038.tar |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.