model_id stringlengths 1 7 | name stringlengths 2 210 | description stringlengths 0 253k | tags listlengths 0 494 | printables_category stringclasses 80
values | image_paths listlengths 0 289 | stl_paths listlengths 0 2.73k | license stringclasses 7
values | source stringlengths 34 40 | shard_file stringclasses 49
values |
|---|---|---|---|---|---|---|---|---|---|
529690 | Yoshi-Mario | <p>Este Yoshi solo necesita soportes en la nariz y, de preferencia, en la barbilla, sin contar eso es muy fácil de imprimir.</p><p>El modelo ya establecido mide 5.5cm de alto, con un peso de 15g, aproximadamente, con una altura de capa de 0.2.</p><p>El ángulo de voladizo en soporte (una opción de Cura) lo recomiendo po... | [
"cutedinosaur",
"figura"
] | Toys & Games > Action Figures & Statues | [
"529690/images/image_1_compressed.jpg",
"529690/images/image_2_compressed.jpg",
"529690/images/image_3_compressed.jpg",
"529690/images/image_4_compressed.jpg",
"529690/images/image_5_compressed.jpg",
"529690/images/image_6_compressed.jpg",
"529690/images/image_7_compressed.jpg"
] | [
"529690/stls/Yoshi-Model.stl"
] | CC0 | https://www.printables.com/model/529690 | data_0040.tar |
442215 | Yoto Mini Dock & Card Holder | <p>A dock for holding my kid's Yoto Mini player and the ever expanding collection of cards. </p><p>The print pictured has some personalizations, the STL file does not have the lettering or flower decals.</p><p>The bottom surface of the 3 compartments have a shallow angle to them which results in very pronounced s... | [
"cardholder",
"dockingstation",
"yotoplayer",
"yoto"
] | Gadgets > Audio | [
"442215/images/image_1_compressed.jpg",
"442215/images/image_2_compressed.jpg",
"442215/images/image_3_compressed.jpg",
"442215/images/image_4_compressed.jpg"
] | [
"442215/stls/Yoto Mini Dock.stl"
] | CC-BY | https://www.printables.com/model/442215 | data_0040.tar |
17911 | You Tried poop emoji trophy | <p>A poop emoji trophy, because no one won.</p>
<p>Remixed from <a href="https://www.thingiverse.com/thing:1607059">https://www.thingiverse.com/thing:1607059</a></p>
| [
"trophy",
"poop",
"thingiverse",
"emoji"
] | Art & Design > Sculptures | [
"17911/images/image_1_compressed.jpg"
] | [
"17911/stls/you_tried.stl"
] | CC-BY | https://www.printables.com/model/17911 | data_0040.tar |
250700 | You wouldn't download a car | <p>I was really glad to find someone had already done one of these. I thought it'd be funny to incorporate another meme type and drop an Audi in there. Fun fact: 75% of the car is showing in the three models.</p><p>Printed on my <a href="https://www.amazon.com/3D-Printer-Prusa/s?k=3D+Printer+Prusa&linkCode=ll2&... | [
"meme"
] | Art & Design > Other Art & Designs | [
"250700/images/image_1_compressed.jpg",
"250700/images/image_2_compressed.jpg",
"250700/images/image_3_compressed.jpg",
"250700/images/image_4_compressed.jpg",
"250700/images/image_5_compressed.jpg",
"250700/images/image_6_compressed.jpg",
"250700/images/image_7_compressed.jpg"
] | [
"250700/stls/MeshBodyV3.stl",
"250700/stls/two-color print configured.stl"
] | CC-BY | https://www.printables.com/model/250700 | data_0040.tar |
351559 | Young deer | <p>Print without support</p> | [
"deer",
"christmasdecoration",
"young",
"roe"
] | Seasonal designs > Winter & Christmas & New Year's | [
"351559/images/image_1_compressed.jpg"
] | [
"351559/stls/deer.stl"
] | CC0 | https://www.printables.com/model/351559 | data_0040.tar |
899080 | Your Epic Ruler | <figure class="image"><img src="https://media.printables.com/media/prints/899080/rich_content/ae84d30e-7bc2-4914-b7a5-9f5972b2f31c/your-epic-ruler.png#%7B%22uuid%22%3A%22a43fc050-60c8-403a-bef8-5f82cdc63f97%22%2C%22w%22%3A958%2C%22h%22%3A172%7D"></figure><h3>Be epic, be awesome. Spice up your studying.</h3><p>I recentl... | [
"dog",
"cat",
"ruler",
"stencil",
"template",
"unicorn",
"stars"
] | Learning > Other 3D Objects for Learning | [
"899080/images/image_1_compressed.jpg",
"899080/images/image_2_compressed.jpg",
"899080/images/image_3_compressed.jpg",
"899080/images/image_4_compressed.jpg"
] | [
"899080/stls/Epic Ruling Cat.stl",
"899080/stls/Epic Ruling Dog.stl",
"899080/stls/Epic Ruling Unicorn.stl",
"899080/stls/Your Epic Ruler.stl"
] | CC-BY | https://www.printables.com/model/899080 | data_0040.tar |
277034 | Your own text on a Sample for Filament Sample Box | Infill / Color Swatch | Remix | <p>Just a fusion 360 model file to add your own text to color swatches by Extrutim.</p><h3>How to use</h3><ol><li>Open the file in Fusion 360</li><li>On the left side right click the sketch named “Text” and choose “Edit sketch”.</li><li>Double click on the text to edit it, input your own text, apply changes and finish ... | [
"color",
"filament",
"sample",
"swatch"
] | 3D Printers > Test Models | [
"277034/images/image_1_compressed.jpg"
] | [] | CC0 | https://www.printables.com/model/277034 | data_0040.tar |
894118 | Your Poor Planning Is Not My Emergency Sign | <p>Print in two colors or use a black sharpie to darken the raised Text</p><p>.Step file Included</p> | [
"sign",
"meme",
"warning",
"work",
"wallmounted"
] | Art & Design > Wall-mounted | [
"894118/images/image_1_compressed.jpg"
] | [
"894118/stls/Poor Planning Sign.stl"
] | BSD | https://www.printables.com/model/894118 | data_0040.tar |
809763 | YouTube Keychain | <ul><li>4mm base and 0.8 color change (0.2 layers = 4 layers) Cut Down if need be</li><li>Youtube1: 37mm x 35mm</li><li>Youtube2: 45mm x 27mm</li><li>6mm Keyring hole</li></ul> | [
"youtube",
"keychain",
"youtuber"
] | Art & Design > Other Art & Designs | [
"809763/images/image_1_compressed.jpg",
"809763/images/image_2_compressed.jpg",
"809763/images/image_3_compressed.jpg"
] | [
"809763/stls/youtube1.stl",
"809763/stls/youtube2.stl"
] | CC0 | https://www.printables.com/model/809763 | data_0040.tar |
523791 | YouTube Logo | <p>I designed it for my son, it's fully printable in various colors.<br><br>Give it a like if you liked it, just knowing that makes me happy.<br><br>Hope you like it. Enjoy it.</p><p><i>(I made a small update to it compared to the photo you see after printing (rounded the edges))</i></p> | [
"logo",
"youtube",
"3dlogo",
"chochi3d"
] | Art & Design > 2D Plates & Logos | [
"523791/images/image_1_compressed.jpg",
"523791/images/image_2_compressed.jpg"
] | [
"523791/stls/LOGO YOUTUBE (RED).stl",
"523791/stls/LOGO YOUTUBE (WHITE).stl",
"523791/stls/TEXT YOUTUBE (BLACK).stl"
] | CC-BY | https://www.printables.com/model/523791 | data_0040.tar |
245666 | YouTube play button | <p>Okay, it's probably the most vain thing I've ever done, but I do like the result. An award for getting 100 subscribers to my YouTube channel isn't unheard of, is it?</p><p>Of course there's a video of how I made mine over on YouTube: </p><figure class="media"><oembed url="https://youtu.be/DPxrQFd3RPs"></oembed>... | [
"youtube",
"award",
"awards",
"vain"
] | Art & Design > 2D Plates & Logos | [
"245666/images/image_1_compressed.jpg",
"245666/images/image_2_compressed.jpg"
] | [
"245666/stls/Main.stl",
"245666/stls/Play.stl"
] | CC-BY | https://www.printables.com/model/245666 | data_0040.tar |
72126 | YoYo | <p>Šnúrku treba zauzliť okolo šróbu</p><p>1x Šrób s guľatou hlavou M4 dĺžka 20mm</p><p>1x Matica M4</p><p> </p><p> </p><p>The string must be knotted around the screw</p><p>1x Screw with a round head M4 length 20mm</p><p>1x Nut M4</p> | [
"hracka"
] | Toys & Games > Other Toys & Games | [
"72126/images/image_1_compressed.jpg",
"72126/images/image_10_compressed.jpg",
"72126/images/image_11_compressed.jpg",
"72126/images/image_12_compressed.jpg",
"72126/images/image_13_compressed.jpg",
"72126/images/image_14_compressed.jpg",
"72126/images/image_2_compressed.jpg",
"72126/images/image_3_co... | [
"72126/stls/Jojo1.stl",
"72126/stls/Jojo2.stl",
"72126/stls/Middle1.stl",
"72126/stls/Middle2.stl",
"72126/stls/Yoyo1.stl",
"72126/stls/Yoyo2.stl"
] | CC0 | https://www.printables.com/model/72126 | data_0040.tar |
187978 | Yoyo Stand |
<p>Based off gerkenz' Yoyo Stand but with a wider slot.</p>
<p>I found that when the yoyo was strung and wound up it sat too high in the original design and had a tendency to tilt. I widened the cutout so the Yoyo sits further down and doesn't tilt as much.</p>
Category: Hobby
| [
"thingiverse"
] | Hobby & Makers > Other Ideas | [
"187978/images/image_1_compressed.jpg"
] | [
"187978/stls/yoyo-stand.stl"
] | CC-BY | https://www.printables.com/model/187978 | data_0040.tar |
675397 | Ypso pump cartrige case | <p>I have created travel cases for the replacement vials of the YpsoPump insulin pump.</p><p>And a cylindrical key case inspired by a design by user David Fish from the YpsoPump Facebook group https://www.facebook.com/groups/3214500962154148 , this is a modified version for rough handling.</p><p>I recommend printing in... | [
"case",
"pump",
"diabetes",
"cartrige",
"inzulin",
"inzulinepump",
"inzuline"
] | Healthcare > Medical Tools | [
"675397/images/image_1_compressed.jpg",
"675397/images/image_10_compressed.jpg",
"675397/images/image_11_compressed.jpg",
"675397/images/image_12_compressed.jpg",
"675397/images/image_2_compressed.jpg",
"675397/images/image_3_compressed.jpg",
"675397/images/image_4_compressed.jpg",
"675397/images/imag... | [
"675397/stls/Pouzdro.stl",
"675397/stls/Víko s okem.stl",
"675397/stls/Víko_sroubovací.stl",
"675397/stls/Ypso1x.stl",
"675397/stls/Ypso1x_cover.stl",
"675397/stls/Ypso2x.stl",
"675397/stls/Ypso2x_cover.stl",
"675397/stls/Ypso5x.stl",
"675397/stls/Ypso5x_cover.stl"
] | CC-BY | https://www.printables.com/model/675397 | data_0040.tar |
1140816 | YTSIO anchor windlass for RC boats updated MK1.1 | <p><i><strong>We sell assembled and tested units, please contact us : </strong></i><a href="mailto:ytsio@outlook.com"><i><strong>ytsio@outlook.com</strong></i></a><i><strong> or visit our website/webshop: </strong></i><a href="http://www.ytsio.nl"><i><strong>http://www.ytsio.nl</strong></i></a></p><p><strong>UPDATED VE... | [
"rc",
"boat",
"update",
"anchorwinch",
"ytsio",
"ankerlier"
] | Hobby & Makers > RC & Robotics | [
"1140816/images/image_1_compressed.jpg",
"1140816/images/image_2_compressed.jpg",
"1140816/images/image_3_compressed.jpg",
"1140816/images/image_4_compressed.jpg"
] | [
"1140816/stls/AnchorWinchBodyCoverMK1.1.stl",
"1140816/stls/AnchorWinchBodyMK1.1.stl",
"1140816/stls/AnchorwinchBodyMountMK1.1 v2.stl",
"1140816/stls/AnchorwinchCableGuideTPUMK1.1 v5.stl",
"1140816/stls/AnchorwinchChainJig6mmMK1.1 v3.stl",
"1140816/stls/AnchorWinchChainWheelCenterTPUMK1.1 v2.stl",
"1140... | CC-BY | https://www.printables.com/model/1140816 | data_0040.tar |
753793 | Yu-Gi-Oh - battle city duel disk | <p>battle city duel disk, no mechanism or electronics yet i will add those in time though</p>
<p>update: sorry about the silence on this so far i have been in the process of printing to test the scale and the uploaded parts.</p>
<p>the cards are tested and fit perfectly even sleeved (please sleeve your cards) i am prin... | [
"cosplayprop",
"thingiverse",
"yugioh"
] | Costumes & Accessories > Props | [
"753793/images/image_1_compressed.jpg",
"753793/images/image_10_compressed.jpg",
"753793/images/image_11_compressed.jpg",
"753793/images/image_12_compressed.jpg",
"753793/images/image_13_compressed.jpg",
"753793/images/image_14_compressed.jpg",
"753793/images/image_15_compressed.jpg",
"753793/images/i... | [
"753793/stls/deckandgraveyard.stl",
"753793/stls/field_1_1.stl",
"753793/stls/field_1_2.stl",
"753793/stls/field_1_3.stl",
"753793/stls/field_1_4.stl",
"753793/stls/field_1_5.stl",
"753793/stls/field_1_6.stl",
"753793/stls/Field_2_1.stl",
"753793/stls/Field_2_2.stl",
"753793/stls/Field_2_3.stl",
... | CC-BY | https://www.printables.com/model/753793 | data_0040.tar |
457384 | Yu-Gi-Oh! Clamshell Deck Box | <p>This is a remix of another 3D model, check the original out too.</p><p> </p><p>This deck box had its internal dimensions resized to: 62x92x40mm (Width x Height x Depth).</p><p>This means that it should fit regular and sleeved cards (I use 60x91mm sleeves, it should fit slightly bigger ones too) and in my experi... | [
"case",
"deck",
"yugioh"
] | Toys & Games > Other Toys & Games | [
"457384/images/image_1_compressed.jpg",
"457384/images/image_2_compressed.jpg",
"457384/images/image_3_compressed.jpg",
"457384/images/image_4_compressed.jpg"
] | [
"457384/stls/Deck Box Yu-Gi-Oh.stl",
"457384/stls/Deck Lid Yu-Gi-Oh.stl"
] | CC-BY | https://www.printables.com/model/457384 | data_0040.tar |
327911 | YubiKey 5C cap | <p>The YubiKey 5C is a great two-factor security key. It's very small & compact and perfect for modern laptops & most smartphones. It can be attached to a key ring with your other keys so you always have it at hand. However, the bare usb-c connector is unprotected, and dust/debis might build up.</p><p>This mode... | [
"cap",
"keychain",
"keycap",
"yubikey",
"yubico",
"yubikey5"
] | Hobby & Makers > Electronics | [
"327911/images/image_1_compressed.jpg"
] | [
"327911/stls/yubikey_5c_cap.stl",
"327911/stls/yubikey_5c_cap_8mm.stl",
"327911/stls/yubikey_5c_cap_9mm.stl"
] | CC-BY | https://www.printables.com/model/327911 | data_0040.tar |
390727 | YubiKey 5C NFC Case/Keychain (USB C only) with STEP file | <h3>YubiKey 5C NFC Case/Keychain (USB C only)</h3><p>I needed something to protect my YubiKey from random bumps and scratches in my pocket. Printing in different colors to differentiate them.</p><p>It is intended to use case cap as main holder of the key to prevent wear, the bottom part slides off and on.</p><h4>Print ... | [
"case",
"keychain",
"yubikey",
"etui",
"yubikey5",
"yubikey5nfc",
"yubikey5cnfc",
"yubikey5c"
] | 3D Printers > Accessories | [
"390727/images/image_1_compressed.jpg",
"390727/images/image_2_compressed.jpg",
"390727/images/image_3_compressed.jpg",
"390727/images/image_4_compressed.jpg"
] | [
"390727/stls/YubiKey 5 NFC case - cap bottom.stl",
"390727/stls/YubiKey 5 NFC case - cap top.stl",
"390727/stls/YubiKey 5 NFC case - case bottom.stl",
"390727/stls/YubiKey 5 NFC case - case top.stl",
"390727/stls/YubiKey 5 NFC case.stl"
] | CC-BY | https://www.printables.com/model/390727 | data_0040.tar |
379797 | Yubikey Cover - Remix for USB C | <p>I downloaded the Yubikey Cover from Kenny but needed to do some adjustments to use it on my USB-C version. <br> </p> | [
"cover",
"yubikey"
] | Gadgets > Computers | [
"379797/images/image_1_compressed.jpg"
] | [
"379797/stls/yubikey-cover.stl"
] | CC-BY | https://www.printables.com/model/379797 | data_0040.tar |
356442 | YubiKey Keychain Sleeve | <h3>What's it for?</h3><p>When you need it, simply remove the YubiKey from its sleeve, where it rests locked in place securely using a flexture-based catch and snap it back in place with a satisfying click once you're done.</p><p> </p><h3>Why two halves?</h3><p>The model is meant to be printable without any suppor... | [
"keychain",
"keyring",
"yubikey",
"yubikey5"
] | Gadgets > Portable Devices | [
"356442/images/image_1_compressed.jpg",
"356442/images/image_2_compressed.jpg",
"356442/images/image_3_compressed.jpg",
"356442/images/image_4_compressed.jpg",
"356442/images/image_5_compressed.jpg",
"356442/images/image_6_compressed.jpg"
] | [
"356442/stls/Bottom.stl",
"356442/stls/Top.stl"
] | CC0 | https://www.printables.com/model/356442 | data_0040.tar |
217636 | Yuki Air Cooler - Mini | <figure class="media"><oembed url="https://www.youtube.com/watch?v=vF2obkSBFAg"></oembed></figure><p>Fits any 80x80x25mm PC fan<br><br>Visit <a href="https://yukiairconditioner.com/">website</a> for more info</p> | [
"mk3s",
"fan",
"cooling",
"fanduct",
"watercooling",
"prusamini",
"coolingfan",
"coolingduct",
"airconditoner"
] | Seasonal designs > Summer | [
"217636/images/image_1_compressed.jpg",
"217636/images/image_2_compressed.jpg",
"217636/images/image_3_compressed.jpg",
"217636/images/image_4_compressed.jpg",
"217636/images/image_5_compressed.jpg",
"217636/images/image_6_compressed.jpg"
] | [
"217636/stls/Yuki Body Classic.stl",
"217636/stls/Yuki Cap.stl",
"217636/stls/Yuki Extension.stl",
"217636/stls/Yuki Finger Guard.stl",
"217636/stls/Yuki Support.stl"
] | CC0 | https://www.printables.com/model/217636 | data_0040.tar |
409434 | Yum Squeezer - Treat Tube Helper! | <p>I created this assistive device to hold treat tubes! If you have any difficulty holding and squeezing the smooth thin tubes of cat treat paste - this device gives a good gripping point and applies even pressure to help you squeeze out every little bit! It's easy to use and can be used right or left handed, in ... | [
"cat",
"accessibility",
"cats",
"catfood",
"petfood",
"cattoy",
"catfoodholder",
"cattreat",
"cattoys"
] | Household > Pets | [
"409434/images/image_1_compressed.jpg",
"409434/images/image_10_compressed.jpg",
"409434/images/image_11_compressed.jpg",
"409434/images/image_2_compressed.jpg",
"409434/images/image_3_compressed.jpg",
"409434/images/image_4_compressed.jpg",
"409434/images/image_5_compressed.jpg",
"409434/images/image... | [
"409434/stls/Yum-Squeezer.stl"
] | CC-BY | https://www.printables.com/model/409434 | data_0040.tar |
137782 | YZ brace and carrying handle for Prusa Mini/Mini+ | <p>A simple accessory to improve stability and portability. Designed for M5 mounting hardware: 3x 12mm bolts on the Y axis, 3x 25mm bolts on the Z axis, 6x T-slot nuts, and optional nylon washers. </p><p>This fits on the Prusa Mini bed with 5mm brim. I printed this lying down on the face which contacts the Z axis,... | [
"brace",
"handle",
"prusamini",
"framebrace",
"zbrace",
"carryhandle"
] | 3D Printers > Prusa Parts & Upgrades | [
"137782/images/image_1_compressed.jpg"
] | [
"137782/stls/brace_handle v5.1.stl",
"137782/stls/brace_handle v5.2.stl",
"137782/stls/brace_handle v6.stl",
"137782/stls/brace_handle v6_1.stl"
] | CC0 | https://www.printables.com/model/137782 | data_0040.tar |
92462 | YZ-Case Kabelmanagment Upgrade | <p>Dieser Beitrag könnte für alle interessant sein, die an ihrem Prusa mk3s dieses <a href="https://www.printables.com/de/prints/1910-yz-case/files">YZ-Case von Fuhrmann</a><br>verbaut haben und mit dem Übergang der Kabelstränge in das Gehäuse nicht ganz glücklich sind. <br>Auch ich habe vor kurzem meinem mk3s die... | [] | 3D Printers > Other Printer Parts & Upgrades | [
"92462/images/image_1_compressed.jpg",
"92462/images/image_2_compressed.jpg",
"92462/images/image_3_compressed.jpg",
"92462/images/image_4_compressed.jpg",
"92462/images/image_5_compressed.jpg",
"92462/images/image_6_compressed.jpg",
"92462/images/image_7_compressed.jpg",
"92462/images/image_8_compres... | [
"92462/stls/Extruder_Halbschale m.stl",
"92462/stls/Extruder_Halbschale w.stl",
"92462/stls/Extruder_zsb.stl",
"92462/stls/Halbschale m_V2.stl",
"92462/stls/Halbschale w_V2.stl",
"92462/stls/Heizbett_Halbschale 1.stl",
"92462/stls/Heizbett_Halbschale 2.stl",
"92462/stls/Heizbett_zsb.stl",
"92462/stl... | CC0 | https://www.printables.com/model/92462 | data_0040.tar |
771491 | Z axis ANTI vibration tool | <blockquote><h3><i><strong>USE ONLY AFTER CALIBRATION!!!</strong></i></h3></blockquote><p><strong>UPGRADED!!!</strong></p><p><strong>NEW two files:</strong></p><blockquote><p><strong>MK3S+ </strong></p><p><strong>8x8mm</strong></p></blockquote><blockquote><p><strong>MK4</strong></p><p><strong>8x10mm</strong></p></... | [
"upgrade",
"mk3s",
"antivibration",
"vibration",
"zaxis",
"mk4"
] | 3D Printers > Prusa Parts & Upgrades | [
"771491/images/image_1_compressed.jpg",
"771491/images/image_2_compressed.jpg"
] | [
"771491/stls/MK3S+.stl",
"771491/stls/MK4.stl"
] | CC0 | https://www.printables.com/model/771491 | data_0040.tar |
109869 | Z Axis movement vizulatation | <p>---------------------------------------------------</p><p>My settings:<br>PETG</p><p>Layer height: 0.2<br>Perimeters: 3<br>Infill: 15%</p><p>No supports</p> | [
"prusa",
"prusai3",
"originalprusai3mk3",
"prusai3mk2",
"3dprinter",
"prusai3mk3",
"prusai3mk3s",
"prusai3mk3smmu2s",
"prusai3mk3mmu2",
"zaxis",
"a8zaxis",
"3dprinterpart",
"mk3szaxis"
] | 3D Printers > Other Printer Parts & Upgrades | [
"109869/images/image_1_compressed.jpg",
"109869/images/image_2_compressed.jpg",
"109869/images/image_3_compressed.jpg",
"109869/images/image_4_compressed.jpg"
] | [
"109869/stls/Z Axis movement vizulatatior.stl"
] | CC0 | https://www.printables.com/model/109869 | data_0040.tar |
849211 | Z banding test | <p>Z banding test</p> | [
"test",
"calibration",
"z",
"banding",
"zbanding"
] | 3D Printers > Test Models | [
"849211/images/image_1_compressed.jpg",
"849211/images/image_2_compressed.jpg"
] | [
"849211/stls/z banding test.stl"
] | CC-BY | https://www.printables.com/model/849211 | data_0040.tar |
545681 | Z Belt Clip Vorn 2.4 | <p>Simple Z Belt Clip for Vorn 2.4. Slips and holds extra slack. Found on Github but could not find it here on Printables. I have used this on all my voron's, easy to use and so simplistic. </p> | [
"beltclip",
"voron",
"voron24"
] | 3D Printers > Other Printer Parts & Upgrades | [
"545681/images/image_1_compressed.jpg",
"545681/images/image_2_compressed.jpg"
] | [
"545681/stls/z_belt_clip.stl"
] | CC0 | https://www.printables.com/model/545681 | data_0040.tar |
888867 | Z Belt Tensioner No Hardware Required Elegoo Neptune 4 Pro/Plus/Max | <p>No need to run to the store or browse amazon for this one - just some glue and filament hold it together. Smooth operation. Easy and quick upgrade. Long lasting. No belt wear. Increases belt's grip on pulley gears. Clips to the top rail. You may have noticed the rumbling layer lines in the pics. This is caused by us... | [
"clip",
"mount",
"rail",
"20x20"
] | 3D Printers > Other Printer Parts & Upgrades | [
"888867/images/image_1_compressed.jpg",
"888867/images/image_2_compressed.jpg",
"888867/images/image_3_compressed.jpg",
"888867/images/image_4_compressed.jpg",
"888867/images/image_5_compressed.jpg",
"888867/images/image_6_compressed.jpg"
] | [
"888867/stls/BARREL.stl",
"888867/stls/CLIP.stl",
"888867/stls/ZBT_ROLLIEST.stl"
] | CC-BY | https://www.printables.com/model/888867 | data_0040.tar |
731988 | Z mount for Anycubic Kobra 2 neo | <p>8/10 mm the size of the holes on the printer frame.</p><p>Use bearing 628, size 8x24x8mm, and use long bolts, standard short ones.</p> | [
"mount",
"z",
"anycubic",
"axis",
"anycubickobra",
"kobra2neo"
] | 3D Printers > Anycubic Parts & Upgrades | [
"731988/images/image_1_compressed.jpg",
"731988/images/image_2_compressed.jpg",
"731988/images/image_3_compressed.jpg"
] | [
"731988/stls/z mount 10mm.stl",
"731988/stls/z mount 8mm.stl"
] | CC-BY | https://www.printables.com/model/731988 | data_0040.tar |
78307 | Z offset calibration print | <p>Nothing more than a square, 0.2mm high so it prints a single layer. I use this for setting the Z offset. The printer's own Z offset calibration is a good start, but it can be a challenge to get the height just right if you haven't done it a bunch of times already. I find using a solid infill test part helps immensel... | [
"prusa",
"calibration",
"zoffset",
"prusaminia"
] | 3D Printers > Test Models | [
"78307/images/image_1_compressed.jpg",
"78307/images/image_2_compressed.jpg",
"78307/images/image_3_compressed.jpg",
"78307/images/image_4_compressed.jpg",
"78307/images/image_5_compressed.jpg",
"78307/images/image_6_compressed.jpg",
"78307/images/image_7_compressed.jpg",
"78307/images/image_8_compres... | [
"78307/stls/100x100 single layer.stl",
"78307/stls/100x50 45 degrees.stl",
"78307/stls/50x50 single layer.stl",
"78307/stls/75x75 single layer.stl"
] | CC0 | https://www.printables.com/model/78307 | data_0040.tar |
102055 | Z offset test | 100mm x 100mm x 0.2mm sheet to test z offset and bed levelling. | Download free 3D printable STL models | [] | 3D Printers > Test Models | [
"102055/images/image_1_compressed.jpg"
] | [
"102055/stls/bed test v1.stl"
] | CC-BY | https://www.printables.com/model/102055 | data_0040.tar |
118407 | Z Orbiter v2.0 Extruder for Original Prusa, Zaribo, Bear Mods. | <p><i><strong>Update: 11th Sep 2023 **</strong> Bodies updated for less-shrink materials (Non-ASA/ABS)</i><br><i><strong>Update: 8th Apr 2023 ** </strong>LED Filament Sensor Cover updated for easy retraction</i><br><i><strong>Update: 15th Aug 2022 **</strong> Extruder covers are updated for a better square nut in... | [
"zaribo",
"originalprusai3mk3",
"bear",
"prusabear",
"prusai3bearupgrade",
"zaribo3030",
"zorbiter"
] | 3D Printers > Prusa Parts & Upgrades | [
"118407/images/image_1_compressed.jpg",
"118407/images/image_2_compressed.jpg",
"118407/images/image_3_compressed.jpg",
"118407/images/image_4_compressed.jpg",
"118407/images/image_5_compressed.jpg",
"118407/images/image_6_compressed.jpg",
"118407/images/image_7_compressed.jpg"
] | [
"118407/stls/12mm Ball Adapter PTFE Cutter.stl",
"118407/stls/23.5mm DRAGON RIGID MOUNT PTFE Cutter.stl",
"118407/stls/26mm REVO PTFE Cutter.stl",
"118407/stls/38.5mm E3DV6 PTFE Cutter.stl",
"118407/stls/Bear MK3 Bearing Cover Bottom.stl",
"118407/stls/Bear MK3 Bearing Cover Top.stl",
"118407/stls/Bear ... | CC-BY | https://www.printables.com/model/118407 | data_0040.tar |
2527 | Z Rotation Indicator for 8mm Rod / Prusa MK3 MK3S+ | <p>I want to observe how much work the mesh bed leveling has to do and it is hard to observe.<br/>
Originally I just sticked some tape on the Z-Axis, but for my new printer I wanted a more elegant solution. So I sketched this together. It is designed for a 8mm Rod and 9mm spacing between the Rods. As the Original Prus... | [
"upgrade",
"prusa",
"prusai3",
"rotation",
"indicator",
"prusamk3",
"3dprinter",
"prusai3mk3",
"prusamk3s",
"fastprint",
"flag",
"zrod",
"bedlevel",
"helpful",
"zaxis",
"3dprinterparts",
"troubleshooting",
"zaxisadjustment",
"zoffset"
] | 3D Printers > Prusa Parts & Upgrades | [
"2527/images/image_1_compressed.jpg",
"2527/images/image_2_compressed.jpg"
] | [
"2527/stls/z-rotation-flag_-_normal.stl",
"2527/stls/z-rotation-flag_-_with_z.stl"
] | CC-BY | https://www.printables.com/model/2527 | data_0040.tar |
859992 | Z Wobble Test WITH cushion | <p>Z Wobble Test with Space to allow squish from first layer to not effect results</p> | [] | 3D Printers > Test Models | [
"859992/images/image_1_compressed.jpg"
] | [
"859992/stls/Z Wobble.stl"
] | CC0 | https://www.printables.com/model/859992 | data_0040.tar |
133617 | Z-Axis Ballerina indicator | <p>This ballerina rotates with the movement of the Z axis.</p><figure class="image image-style-align-left"><img src="https://media.printables.com/media/prints/133617/rich_content/1f48cbaa-98e7-4046-a0be-ce543afca76e/pxl_20230205_044940463_ts_2_adobeexpress.gif#%7B%22uuid%22%3A%2221513d3e-99e0-4629-ac52-aabebb80a4b1%22%... | [
"prusai3",
"visualizer",
"indicator",
"zaxis",
"prusamini"
] | 3D Printers > Accessories | [
"133617/images/image_1_compressed.jpg",
"133617/images/image_2_compressed.jpg"
] | [
"133617/stls/2DBallerina v1.stl",
"133617/stls/desktop_stand v1.stl",
"133617/stls/LeadScrewRod_Cap v2.stl"
] | CC-BY | https://www.printables.com/model/133617 | data_0040.tar |
868399 | Z-axis bush cover for MK4 | <p>This cover prevents dust from accumulating on z-axis bushes. I printed it in PETG using the input shaper preset.</p><p>Important note:</p><p>I was informed that the right cover V1 interfered when the print head was manually moved to the far right. So, I cut off the area and uploaded it as V2. If you use the older V1... | [
"upgrade",
"mod",
"mk4",
"dustcover",
"mk4upgrade",
"mk4mod"
] | 3D Printers > Prusa Parts & Upgrades | [
"868399/images/image_1_compressed.jpg",
"868399/images/image_2_compressed.jpg",
"868399/images/image_3_compressed.jpg",
"868399/images/image_4_compressed.jpg",
"868399/images/image_5_compressed.jpg",
"868399/images/image_6_compressed.jpg"
] | [
"868399/stls/MK4_X-end_cover_L V1.stl",
"868399/stls/MK4_X-end_cover_R V1.stl",
"868399/stls/MK4_X-end_cover_R V2.stl"
] | CC-BY | https://www.printables.com/model/868399 | data_0040.tar |
218192 | Z-Axis Direction Knob #1 for Creality Ender 3 | <p>Based on the Z-Axis Knob for Creality Ender 3 by guppyk (great design by the way).</p><p>I included a direction arrow and text for up or down, just as a visual reference.</p><p>Two versions are included, one with an up logo & arrow and one with a down logo & arrow.</p><p>You may also want to use a bit of ecl... | [
"knob",
"zaxis",
"thingiverse"
] | 3D Printers > Creality Parts & Upgrades | [
"218192/images/image_1_compressed.jpg",
"218192/images/image_2_compressed.jpg",
"218192/images/image_3_compressed.jpg",
"218192/images/image_4_compressed.jpg",
"218192/images/image_5_compressed.jpg"
] | [
"218192/stls/Z-Knob_1_Down.stl",
"218192/stls/Z-Knob_1_Up.stl"
] | CC-BY | https://www.printables.com/model/218192 | data_0040.tar |
81168 | Z-Axis Motor Mount | <p>Had an issue where the original design's slot inserts were too large to fit into the extrusions. I removed them from the model and instead used M4 T-nuts to hold them in place. This also works much better for a dual-z motor, as the aluminum extrusion on the other side doesn't have screw taps for mounting.</p><p>&nbs... | [
"ender3",
"thingiverse"
] | 3D Printers > Other Printer Parts & Upgrades | [
"81168/images/image_1_compressed.jpg",
"81168/images/image_2_compressed.jpg"
] | [
"81168/stls/zmount_v2.stl"
] | CC-BY | https://www.printables.com/model/81168 | data_0040.tar |
69643 | Z-axis rotation indicator | <p>The subtle movements of the z-axis can be hard to see, it is usually less than a millimeter during moves. The rotation of the z-axis is usually bigger, but even that is hard to see. This thing adds an indicator making the rotation more visible. Its construction make it easy to add, without any disassembly and reasse... | [
"openscad",
"prusai3mk3s",
"thingiverse"
] | 3D Printers > Accessories | [
"69643/images/image_1_compressed.jpg",
"69643/images/image_2_compressed.jpg",
"69643/images/image_3_compressed.jpg",
"69643/images/image_4_compressed.jpg"
] | [
"69643/stls/zAxisRotationIndicator1.stl"
] | CC-BY | https://www.printables.com/model/69643 | data_0040.tar |
236258 | Z-Axis Screw Cleaner | <p>The cleaning tips on these are both the same. Which one you print depends on what parts you have lying around. </p><ul><li>The clothes pin version is more soild but does require the sping.</li><li>The rubber band version opens further for easier cleaning. Its only needs some kind of an elastic and a dot of supe... | [
"tool",
"screw",
"cleaning",
"tools",
"cleaner",
"makerbot",
"replicator",
"nosupportneeded"
] | 3D Printers > Accessories | [
"236258/images/image_1_compressed.jpg",
"236258/images/image_2_compressed.jpg",
"236258/images/image_3_compressed.jpg",
"236258/images/image_4_compressed.jpg"
] | [
"236258/stls/Z Axis Cleaner - Clothes pin.stl",
"236258/stls/Z Axis Cleaner - Rubber Band.stl"
] | CC-BY | https://www.printables.com/model/236258 | data_0040.tar |
229145 | z-axis screw cleaning device | <p>This device can be used for cleaning the z-axis guiding thread. It helps collecting dust/strings from the thread which can be removed with tweezers.</p><p>Best way to apply it is to move the the z-axis manually to the top position. Put the tool on the thread and hold it there. Then start the z-axis motor downwards a... | [] | 3D Printers > Accessories | [
"229145/images/image_1_compressed.jpg",
"229145/images/image_2_compressed.jpg"
] | [
"229145/stls/z_axis_cleaner.stl"
] | CC0 | https://www.printables.com/model/229145 | data_0040.tar |
628729 | Z-axis solid top for MK3S | <p>I don't like seeing the upper parts of the Z-axes lift during Z calibration, so I remade them to be stronger in the style of the MK4. Trust me, they're solid!</p> | [
"calibration",
"mk3s",
"axis"
] | 3D Printers > Prusa Parts & Upgrades | [
"628729/images/image_1_compressed.jpg",
"628729/images/image_2_compressed.jpg",
"628729/images/image_3_compressed.jpg"
] | [
"628729/stls/z-top-solid.stl"
] | GPL2.0 | https://www.printables.com/model/628729 | data_0040.tar |
88587 | Z-Axis Stepper Motor Mount with integrated Axial Thrust bearing | <p>Z-Axis Stepper Motor Mount with integrated Axial Thrust bearing. The Axial thrust bearing combined with a <a href="https://bulkman3d.com/product/hd0027/">rigid lead-screw compression coupler</a> completely eliminates Z-axis banding caused by the stepper motor “wobbling” under the weight of the X-gantry.</p><p>Do <st... | [
"ender3",
"zaxis",
"wobble",
"steppermotor",
"crealityender3",
"banding",
"zbanding",
"anycubicmegazero"
] | 3D Printers > Other Printer Parts & Upgrades | [
"88587/images/image_1_compressed.jpg",
"88587/images/image_2_compressed.jpg",
"88587/images/image_3_compressed.jpg",
"88587/images/image_4_compressed.jpg"
] | [
"88587/stls/Motor_Mount with_Thrust Bearing_v2.stl"
] | CC-BY | https://www.printables.com/model/88587 | data_0040.tar |
498014 | Z-axis-cap for Bambu Lab P1P and X1(C) | <p>End cap for on top of the Z-Axis of the Bambu Lab P1P and X1(C). Printed in ABS on textured PEI plate in high resolution. The caps are slightly smaller then the hole of the z-axis so they can easily be removed or move/rotate. ABS is used because of high temp resistance inside the X1C chamber. If you don't print in h... | [
"cap",
"zaxis",
"x1",
"x1c",
"x1carbon",
"p1p"
] | 3D Printers > Bambu Lab Parts & Upgrades | [
"498014/images/image_1_compressed.jpg"
] | [
"498014/stls/z-axis-cap.stl"
] | CC0 | https://www.printables.com/model/498014 | data_0040.tar |
124556 | z-axis-top ptfe m10 Reverse Bowden Tube (Update: 2x Ptfe guide added) | <p>I wanted a guide for my filament, so the Pull on the Extruder is not so hard. So i designed a Filament PTFE quide/holder</p> | [
"prusa",
"youtube",
"filament",
"cover",
"guide",
"ptfe",
"filamentguide",
"bowden",
"zaxis",
"axis",
"reversebowden",
"m10",
"bowdenreverse"
] | 3D Printers > Other Printer Parts & Upgrades | [
"124556/images/image_1_compressed.jpg",
"124556/images/image_2_compressed.jpg",
"124556/images/image_3_compressed.jpg",
"124556/images/image_4_compressed.jpg",
"124556/images/image_5_compressed.jpg",
"124556/images/image_6_compressed.jpg"
] | [
"124556/stls/fs-cover for PTFE m10.stl",
"124556/stls/z-axis-top ptfe 2x m10.stl",
"124556/stls/z-axis-top ptfe m10.stl"
] | CC-BY | https://www.printables.com/model/124556 | data_0040.tar |
170728 | z-banding test | 100mm tall z-banding test | Download free 3D printable STL models | [
"zbanding"
] | 3D Printers > Test Models | [
"170728/images/image_1_compressed.jpg"
] | [
"170728/stls/zbanding test.stl"
] | GPL3.0 | https://www.printables.com/model/170728 | data_0040.tar |
368386 | Z-Motor mount for SV06 (squareness & rigdity) | <p>From the original : </p><ul><li>Sacrificial layer for screw holes</li><li>Added chamfer</li><li>External side reinforcement support</li><li>Full infil for the back and underside (near the 90° angle)</li></ul><p> </p><p><strong>Needed for the build :</strong></p><ul><li><strong>8 heat inserts M4x6x6</strong... | [
"motor",
"printer",
"support",
"mount",
"mod",
"z",
"steppermotor",
"spareparts",
"sovol",
"sv06",
"sovolsv06"
] | 3D Printers > Other Printer Parts & Upgrades | [
"368386/images/image_1_compressed.jpg",
"368386/images/image_2_compressed.jpg",
"368386/images/image_3_compressed.jpg"
] | [
"368386/stls/Z motor L.stl",
"368386/stls/Z motor R.stl"
] | CC0 | https://www.printables.com/model/368386 | data_0040.tar |
321407 | Z-wobble test print | <p>Simple test to see if you have any Z-wobble. </p><p>The print should be perfect smooth and round (with exception of the seam) </p><p>I added a square version also that can help show z-wobble.</p><p>If there is any z-wobble then the tube will have obvious irregularities. </p> | [
"test",
"calibration",
"3dprinter",
"testprint",
"ender3",
"zwobble",
"printercalibration",
"crealityender3",
"antizwobble",
"ender3v2",
"3dprintercalibration"
] | 3D Printers > Test Models | [
"321407/images/image_1_compressed.jpg"
] | [
"321407/stls/z-wobble-test-square.stl",
"321407/stls/z-wobble-test.stl"
] | CC-BY | https://www.printables.com/model/321407 | data_0040.tar |
153582 | Zackenrad | <h3>Postprocessing</h3><figure class="image image_resized image-style-align-left" style="width:50%;"><img src="https://media.printables.com/media/prints/153582/rich_content/b17f4b23-5ee2-42d8-9d9b-89a19c5d726c/dsc05943-24-101-cardboardwheel.jpg#%7B%22uuid%22%3A%22d3bca365-8b85-419f-a153-28d162db21bb%22%2C%22w%22%3A1440... | [
"wheel",
"pin",
"carton",
"nerv",
"pinwheel",
"scoring",
"cardboard",
"neuron",
"perforate",
"perforator"
] | Healthcare > Medical Tools | [
"153582/images/image_1_compressed.jpg",
"153582/images/image_2_compressed.jpg",
"153582/images/image_3_compressed.jpg",
"153582/images/image_4_compressed.jpg"
] | [
"153582/stls/096Zackenrad.stl",
"153582/stls/24-100Zackenrad.stl",
"153582/stls/24-101-CardBoardWheel.stl"
] | CC0 | https://www.printables.com/model/153582 | data_0040.tar |
1068035 | Zaggrivation (Strategy Board Game) | <p>A 3D printed strategy board game for up to four players.</p><p>Game tokens for this model are compatible with <a href="https://www.printables.com/model/1067994">Four-in-a-Row</a>.<br> </p><figure class="media"><oembed url="https://www.youtube.com/embed/9TFgddJZ4gc"></oembed></figure><h4><strong>How to Play</str... | [
"toy",
"game",
"boardgame",
"strategy"
] | Toys & Games > Board Games | [
"1068035/images/image_1_compressed.jpg",
"1068035/images/image_2_compressed.jpg"
] | [
"1068035/stls/Demo - Assembled.stl",
"1068035/stls/Demo - Storage Bin.stl",
"1068035/stls/Foot.stl",
"1068035/stls/Frame - Lockable Feet.stl",
"1068035/stls/Frame - Lockable.stl",
"1068035/stls/Frame.stl",
"1068035/stls/Lock Foot.stl",
"1068035/stls/Lock.stl",
"1068035/stls/Storage Bin- Bottom.stl"... | CC-BY | https://www.printables.com/model/1068035 | data_0040.tar |
650884 | Zahnrad Spinner | <p>Das Model ist ein Spur gear Spinner mit zwei Zahnrädern zum Direkten Ausdrucken. Ich habe hier 0,5mm Luft mit hineinkonstruiert. Ein Druck sollte ohne Brim und Stützen möglich sein. Beim Druck stelle ich auf fine (0.1mm) und auf 50mm pro Sekunde in PLA weiß habe ich 200 Grad und 60 Grad Betttemperatur. Nach de... | [
"spinner",
"spurgear",
"zahnrad"
] | Toys & Games > Other Toys & Games | [
"650884/images/image_1_compressed.jpg",
"650884/images/image_2_compressed.jpg",
"650884/images/image_3_compressed.jpg"
] | [
"650884/stls/Zahnrad spinner v4.stl"
] | GPL2.0 | https://www.printables.com/model/650884 | data_0040.tar |
1260101 | Zajíc na kole | <p>Jednoduchá dekorace,tisk 0,2</p> | [
"rabbit",
"easter",
"egg",
"velikonoce",
"vejce",
"zajic"
] | Art & Design > Wall-mounted | [
"1260101/images/image_1_compressed.jpg"
] | [
"1260101/stls/zajíc na kole.stl"
] | CC0 | https://www.printables.com/model/1260101 | data_0040.tar |
690304 | ZAxis Dust Cover MK4 / MK4S | <p>Benefits for the part:</p><ul><li>prevent dust from entering the stepper motor</li><li>perfect fit and easy to remove</li><li>inspired by prusa design</li><li>little use of materials, great benefit</li></ul><p><br>Before you start printing, load the file into the slicer and add the same parts mirrored to get the par... | [
"upgrade",
"prusa",
"mod",
"stepper",
"cover",
"dust",
"z",
"zaxis",
"mk4",
"dustcover",
"prusamk4",
"mk4s",
"longlife"
] | 3D Printers > Prusa Parts & Upgrades | [
"690304/images/image_1_compressed.jpg",
"690304/images/image_2_compressed.jpg",
"690304/images/image_3_compressed.jpg",
"690304/images/image_4_compressed.jpg",
"690304/images/image_5_compressed.jpg"
] | [
"690304/stls/Zachsis_DustCover_MK4.stl"
] | GPL2.0 | https://www.printables.com/model/690304 | data_0040.tar |
902942 | Zelda | <p>Zelda</p> | [] | Art & Design > Wall-mounted | [
"902942/images/image_1_compressed.jpg"
] | [
"902942/stls/Zelda.stl"
] | CC-BY | https://www.printables.com/model/902942 | data_0040.tar |
178798 | Zelda Ocarina |
<p>
<figure class="media">
<oembed url="https://www.youtube.com/watch?v=hJsw8k0eir4"></oembed>
</figure>
</p>
<p>Rejoins nous : <a href="https://www.facebook.com/groups/492474174608397/">https://www.facebook.com/groups/492474174608397/</a></p>
Category: Other
| [
"time",
"zelda",
"link",
"legend",
"wild",
"breath",
"ocarina",
"wind",
"thingiverse",
"legendofzelda",
"breathofthewild",
"musicalinstrument",
"instrument",
"musical",
"ocarinaoftime",
"waker"
] | Hobby & Makers > Other Ideas | [
"178798/images/image_1_compressed.jpg",
"178798/images/image_2_compressed.jpg"
] | [
"178798/stls/Ocarina_Zelda_178798.stl"
] | CC-BY | https://www.printables.com/model/178798 | data_0040.tar |
482235 | Zelda TotK Coaster | <p>I'm having a blast playing The Legend of Zelda: Tears of the Kingdom. I decided to make a Coaster taking inspirantion in the game art.</p><p>Enjoy! If you have any questions or suggestions, hit me up in the comments. And if you wanna support me, give it a like, download it, and share it with your friends. Happy prin... | [
"zelda",
"coaster",
"totk"
] | Gadgets > Video Games | [
"482235/images/image_1_compressed.jpg",
"482235/images/image_2_compressed.jpg",
"482235/images/image_3_compressed.jpg",
"482235/images/image_4_compressed.jpg"
] | [
"482235/stls/Coaster.stl"
] | CC-BY | https://www.printables.com/model/482235 | data_0040.tar |
508176 | Zelda TOTK cover dock Nintendo Switch | <p>Zelda TOTK cover dock Nintendo Switch</p><p> </p><p>J'ai vue un fichier méga similaire sur Thingiverse mais le STL était très lourd j'ai donc tout refait. </p><p> </p><p>Voici mon fichier</p><p> </p><p>J'ai aussi mis le 3MF multi couleur pour bambulab</p><p> </p><p>Merci :)</p> | [
"nintendo",
"switch",
"zelda",
"dock",
"totk"
] | Gadgets > Video Games | [
"508176/images/image_1_compressed.jpg",
"508176/images/image_2_compressed.jpg"
] | [
"508176/stls/ZELDA DOCK ASSISE.stl",
"508176/stls/zelda v4.stl"
] | CC-BY | https://www.printables.com/model/508176 | data_0040.tar |
7195 | Zelda: Breath of the Wild – Guardian Sword with NeoPixel LEDs | <p>
<figure class="media">
<oembed url="https://www.youtube.com/watch?v=BNUuwJpeilM"></oembed>
</figure>
</p>
<p>Read the full guide on: <a href="https://learn.adafruit.com/breath-of-the-wild-guardian-sword-led-3d-printed/">https://learn.adafruit.com/breath-of-the-wild-guardian-sword-led-3d-printed/</a></p>
<p>This is ... | [
"cosplay",
"sword",
"nintendo",
"zelda",
"thingiverse",
"breathofthewild",
"thelegendofzelda"
] | Costumes & Accessories > Props | [
"7195/images/image_1_compressed.jpg",
"7195/images/image_10_compressed.jpg",
"7195/images/image_11_compressed.jpg",
"7195/images/image_12_compressed.jpg",
"7195/images/image_13_compressed.jpg",
"7195/images/image_14_compressed.jpg",
"7195/images/image_15_compressed.jpg",
"7195/images/image_16_compress... | [
"7195/stls/blade-gem.stl",
"7195/stls/blade-handle-cover-l.stl",
"7195/stls/blade-handle-cover-r.stl",
"7195/stls/blade-handle-r.stl",
"7195/stls/blade-handlel.stl",
"7195/stls/blade-mid-r.stl",
"7195/stls/blade-midl.stl",
"7195/stls/blade-strip-mid.stl",
"7195/stls/blade-strip-tip.stl",
"7195/stl... | CC-BY | https://www.printables.com/model/7195 | data_0040.tar |
1284834 | Zero Clearance Block/Backplate Festool Kapex KS 120 EB | <p>Prevent blow-out on the back side of your workpieces with this simple solution. It clips right into the “half-circle” recess in the middle of the fence bracket. Once clipped in, unclamp both side fences and pull them inward, until each fence captures the “ears” of the insert. Lock your fences in position and you're ... | [
"saw",
"block",
"zero",
"fence",
"clearance",
"insert",
"festool",
"miter",
"compound",
"kapex"
] | Hobby & Makers > Tools | [
"1284834/images/image_1_compressed.jpg",
"1284834/images/image_2_compressed.jpg",
"1284834/images/image_3_compressed.jpg",
"1284834/images/image_4_compressed.jpg"
] | [
"1284834/stls/Festool-Kapex-KS120EB-Zero-Clearance-Block.STEP.stl"
] | CC-BY | https://www.printables.com/model/1284834 | data_0040.tar |
10697 | Zero Clearance Insert, Miter Saw Plate, DW715 | <p>I created a zero clearance insert to replace the standard stock insert on my DW715 Dewalt Miter saw. This one has been in use for a few months now and doesn't show any serious signs of wear. It requires a long bed (I have a prusa i3), but it it could potentially be printed in two pieces.</p>
<p>Check out more on my ... | [
"dewalt",
"woodworking",
"saw",
"thingiverse",
"mitersaw"
] | Hobby & Makers > Tools | [
"10697/images/image_1_compressed.jpg",
"10697/images/image_2_compressed.jpg",
"10697/images/image_3_compressed.jpg"
] | [
"10697/stls/dw715_zci.stl"
] | CC-BY | https://www.printables.com/model/10697 | data_0040.tar |
618278 | Zero offset Clamped GE5C Mount for Voron 2.4 | <p>Spherical bearing Z joint for Voron 2.4</p><p><strong>Update 11-11-2023: </strong><em>Slightly adjusted models per feedback.</em></p><p><a target="_blank" rel="noopener noreferrer nofollow" class="editor-link" href="https://github.com/TorxFighter/Voron-Mods/tree/main/Zero-Offset_Clamped_GE5C">Github for up to date m... | [
"voron",
"voron24",
"ge5c"
] | 3D Printers > Voron Parts & Upgrades | [
"618278/images/image_1_compressed.jpg",
"618278/images/image_2_compressed.jpg",
"618278/images/image_3_compressed.jpg",
"618278/images/image_4_compressed.jpg",
"618278/images/image_5_compressed.jpg"
] | [
"618278/stls/4mmPrintedSpacer_X4.stl",
"618278/stls/ClampPiece_X4.stl",
"618278/stls/InnerBodyMirror_X2.stl",
"618278/stls/InnerBody_X2.stl",
"618278/stls/OuterBodyHallEffect.stl",
"618278/stls/OuterBodyMirror_X2.stl",
"618278/stls/OuterBody_X2.stl",
"618278/stls/[a]BeltClamp_X4.stl"
] | GPL3.0 | https://www.printables.com/model/618278 | data_0040.tar |
118863 | Zetor keychain | Přívěsek na klíče | Download free 3D printable STL models | [
"privesek",
"klicenka",
"klice",
"zetor"
] | Art & Design > 2D Plates & Logos | [
"118863/images/image_1_compressed.jpg"
] | [
"118863/stls/zetor.stl"
] | CC0 | https://www.printables.com/model/118863 | data_0040.tar |
72194 | Zetor Logo | Old Zetor logo (Brnenská Zbrojovka) fits on UR I (2011, 3011, 4011 - tested on 30111) | Download free 3D printable STL models | [] | Hobby & Makers > Automotive | [
"72194/images/image_1_compressed.jpg",
"72194/images/image_2_compressed.jpg",
"72194/images/image_3_compressed.jpg"
] | [
"72194/stls/zetor.stl"
] | CC0 | https://www.printables.com/model/72194 | data_0040.tar |
87111 | ZIP Handle | <p>I made lot of models with 3D printer during last 4 years.<br>Some of them were exposed on my stall at Maker Faire Prague 2021.<br>Now I would like to offer some of them for other 3D printing guys.</p><p>There is one small and simple piece for replacing broken ZIP Hanle.</p><p>It consist from two parts. The first one... | [
"repairpart",
"zip"
] | Fashion > Other Fashion Accessories | [
"87111/images/image_1_compressed.jpg",
"87111/images/image_2_compressed.jpg",
"87111/images/image_3_compressed.jpg"
] | [
"87111/stls/ZIP Handle.stl",
"87111/stls/ZIP Plug.stl"
] | GPL3.0 | https://www.printables.com/model/87111 | data_0040.tar |
983016 | Zip tie | Zip tie | Download free 3D printable STL models | [
"tie",
"clean",
"organize",
"zip"
] | Hobby & Makers > Organizers | [
"983016/images/image_1_compressed.jpg"
] | [
"983016/stls/Zip_Tie.stl"
] | CC-BY | https://www.printables.com/model/983016 | data_0040.tar |
61128 | Zip Tie 8 Inches | <p>Really wanted to have a access to a reliable 3D-printed cable tie that wasn't tiny. So I created this 8 inch standard cable tie.</p><p>Works really well and reliable for me. Haven't had any issues so far. If you apply enough force to the locking paul, you'll eventually bend the locking arm backwards and it'll be mor... | [
"ziptie",
"fastener",
"thingiverse"
] | 3D Printers > Accessories | [
"61128/images/image_1_compressed.jpg",
"61128/images/image_2_compressed.jpg",
"61128/images/image_3_compressed.jpg",
"61128/images/image_4_compressed.jpg"
] | [
"61128/stls/Zip_Tie_v20.stl"
] | CC-BY | https://www.printables.com/model/61128 | data_0040.tar |
122145 | Zip tie anchor | <p>A zip tie anchor with a srew/nail hole I made for my friend.</p> | [
"anchor",
"ziptieanchor"
] | Gadgets > Other Gadgets | [
"122145/images/image_1_compressed.jpg",
"122145/images/image_2_compressed.jpg"
] | [
"122145/stls/ZipTieAnchor.stl"
] | CC-BY | https://www.printables.com/model/122145 | data_0040.tar |
40416 | Zip tie anchor / Kabelbinderhalter | <p>Yet another base for zip ties. Just use some<br>double-sided tape (e.g. 3M™ VHB™) on the bottom to hold the anchor wherever you want.<br>The anchor is designed for Zip ties with a max. width of 2,5 mm.</p><p>If you want another size, just hit me up!</p><h3>Print instructions</h3><p>Easy to print.</p><p>No supports a... | [
"organization",
"ziptie",
"cablemanagement",
"cabletie",
"cableholder",
"zipties",
"ziptieanchor",
"kabelbinder",
"ziptiemount"
] | Hobby & Makers > Organizers | [
"40416/images/image_1_compressed.jpg",
"40416/images/image_2_compressed.jpg"
] | [
"40416/stls/kabelbinderhalter.stl",
"40416/stls/kabelbinderhalter02mm.stl"
] | CC-BY | https://www.printables.com/model/40416 | data_0040.tar |
1300803 | Zip Tie Clip 45 mm T Slot Extrusion | <p>I couldn't find a zip tie clip for 45 series T slot extrusions and ended up making this. Modeled from scratch; hope it helps someone. <br><br>PETG or ABS recommended, designed for 0.4 mm nozzle and 0.2 mm layers, but it should be pretty forgiving.<br><br>Update: Uploaded R2, which reduces the T clip depth, adds... | [
"extrusion",
"tslot",
"ziptie",
"cablemanagement",
"cabletie",
"8020",
"45mm",
"extrusionmount"
] | 3D Printers > Accessories | [
"1300803/images/image_1_compressed.jpg"
] | [
"1300803/stls/45 Series Zip Tie Clip.stl",
"1300803/stls/45 Series Zip Tie Clip_2.stl"
] | CC-BY | https://www.printables.com/model/1300803 | data_0040.tar |
265235 | Zip tie mount for Original Prusa Enclosure - External | <p>I had a need to run and secure a power cable on the outside of my Original Prusa Enclosure. </p><p>I designed this zip tie mount for that purpose. It has an inset for an M3 nut. I used a M3 x 4mm socket cap screw to attach to enclosure. </p><p> </p><p>Print Settings</p><p>Filament: ... | [
"prusa",
"mount",
"enclosure",
"ziptie",
"prusaenclosure",
"originalprusaenclosure"
] | 3D Printers > Accessories | [
"265235/images/image_1_compressed.jpg",
"265235/images/image_2_compressed.jpg",
"265235/images/image_3_compressed.jpg"
] | [
"265235/stls/Zip Tie Mount - Small.stl"
] | GPL2.0 | https://www.printables.com/model/265235 | data_0040.tar |
711249 | Zip Tie Organiser | <p>Printed with PLA. Layer height 0.2mm. No supports needed.</p> | [] | Hobby & Makers > Tools | [
"711249/images/image_1_compressed.jpg"
] | [
"711249/stls/Zip Tie Organiser.stl"
] | CC0 | https://www.printables.com/model/711249 | data_0040.tar |
582696 | Zipper | <figure class="image"><img src="https://media.printables.com/media/prints/582696/rich_content/6a2a6e8d-fdf4-4a76-99c6-9c67cde2bb57/ezgifcom-optimize.gif#%7B%22uuid%22%3A%22f52b92e9-3602-4111-90e9-ad1b4b27a45e%22%2C%22w%22%3A869%2C%22h%22%3A500%7D"></figure><p>A completely printable and functional zipper. As a replaceme... | [
"diy",
"modular",
"fun",
"repair",
"spare",
"sparepart",
"clothes",
"zipper",
"zip",
"proofofconcept",
"reissverschluss"
] | Costumes & Accessories > Other Costume Accessories | [
"582696/images/image_1_compressed.jpg",
"582696/images/image_2_compressed.jpg",
"582696/images/image_3_compressed.jpg"
] | [
"582696/stls/Zip-Slider V0.2.stl",
"582696/stls/Zipper V0.2.stl"
] | CC-BY | https://www.printables.com/model/582696 | data_0040.tar |
156296 | Zipper pull | <p>A replacement zipper pull I made when the one on my backpack broke, and I couldn't find a satisfying replacement. I've used it daily for over a month now, and have no complaints.</p><p>When slicing the base, please orient it hole-down for best results, as shown on the picture.</p><p><strong>Assembly</strong>: pull t... | [
"repair",
"zipper",
"zip"
] | Fashion > Other Fashion Accessories | [
"156296/images/image_1_compressed.jpg",
"156296/images/image_2_compressed.jpg"
] | [
"156296/stls/zipper pull base.stl",
"156296/stls/zipper pull loop.stl"
] | CC-BY | https://www.printables.com/model/156296 | data_0040.tar |
920458 | Zipper Pull (< 5 min, < 0,5 g) | <p>Did your <strong>zipper tear off </strong>while searching for <strong>Bigfoot?</strong> No worries, I got your back! This <strong>easy-to-print zipper</strong> can be <strong>printed within</strong> <strong>5 minutes</strong> and will stand up to Bigfoot himself! Try it out if you don't believe me! *<i>Bigfoot... | [
"small",
"repair",
"outdoor",
"backpack",
"camping",
"easyprint",
"zipper",
"zipperpull"
] | Fashion > Other Fashion Accessories | [
"920458/images/image_1_compressed.jpg",
"920458/images/image_2_compressed.jpg"
] | [
"920458/stls/ZipperPull.stl"
] | CC-BY | https://www.printables.com/model/920458 | data_0040.tar |
820564 | Zipper Pull FLEX/TPU | <p>I made this replacement zipper pull for a jacket. It's easy to grip and fits standard zippers.</p><h4>Printing</h4><ul><li>material: TPU (90A/40D is fine)</li><li>layer height: 0.2 mm</li><li>infill: 100 %</li></ul><p>Never printed TPU/Flexibles before? <a href="https://help.prusa3d.com/article/flexible-materials_20... | [
"replacement",
"flexible",
"tpu",
"pull",
"zipper",
"zipperpull"
] | Fashion > Other Fashion Accessories | [
"820564/images/image_1_compressed.jpg",
"820564/images/image_2_compressed.jpg",
"820564/images/image_3_compressed.jpg"
] | [
"820564/stls/Zipper_Pull.stl"
] | CC0 | https://www.printables.com/model/820564 | data_0040.tar |
324058 | Zipper pull with paperclip | <p>Yet another zipper pull designed to be used with a paperclip. Please check paperclip size on the attached image. It does not need any support to be printed.</p><p>Please press both parts firmly with pliers.</p><p>Happy using!</p><p> </p> | [
"paperclip",
"zipper",
"zipperpull"
] | Fashion > Other Fashion Accessories | [
"324058/images/image_1_compressed.jpg",
"324058/images/image_2_compressed.jpg",
"324058/images/image_3_compressed.jpg",
"324058/images/image_4_compressed.jpg"
] | [
"324058/stls/ZipperPaperClip1.stl",
"324058/stls/ZipperPaperClip2.stl"
] | CC0 | https://www.printables.com/model/324058 | data_0040.tar |
222219 | Zipper Puller using paperclip | <p>Remix of the <a href="https://www.thingiverse.com/thing:2594163">hamano's paperclip</a>.</p><p>We only had the kind of paper clips in the pictures and many of the already done paper clip pullers did not fit to them, so I made my own from scratch.</p><p>All the credits should go to the original creator for this amazi... | [
"zipper",
"zipperpull"
] | Fashion > Other Fashion Accessories | [
"222219/images/image_1_compressed.jpg",
"222219/images/image_2_compressed.jpg",
"222219/images/image_3_compressed.jpg"
] | [
"222219/stls/zipper_puller.stl"
] | CC0 | https://www.printables.com/model/222219 | data_0040.tar |
618515 | Zipper Slider for #5 two-way-Zippers - Reißverschluss Schieber für 2-Wege Reißverschlüsse 5mm | <p>Hier habe ich Slider u.a. für 2-Wege-Plastikreißverschlüsse 5mm konstruiert.</p><p>Der Slider besteht jeweils aus 3 Teilen, welche nachher zusammengefügt werden. </p><p>Der Bügel wird zuerst hinten eingehakt und dann vorsichtig nach unten gedrückt - dann rastet er ein. Dabei ist zu beachten, dass der Bügel bei ... | [
"replacement",
"slider",
"plastic",
"zipper"
] | Fashion > Other Fashion Accessories | [
"618515/images/image_1_compressed.jpg",
"618515/images/image_2_compressed.jpg",
"618515/images/image_3_compressed.jpg",
"618515/images/image_4_compressed.jpg",
"618515/images/image_5_compressed.jpg",
"618515/images/image_6_compressed.jpg"
] | [
"618515/stls/Bügel.stl",
"618515/stls/Pull - Griff.stl",
"618515/stls/Slider below-unten.stl",
"618515/stls/Slider komplett.stl",
"618515/stls/Slider.stl"
] | GPL2.0 | https://www.printables.com/model/618515 | data_0040.tar |
462115 | Zippo gridfinity | <p>A zippo lighter stand for gridfinity. has choice of putting magnets in the bottom to help guide light into place but doesn't need them. Uses standard 6x2mm gridfinity magnets.</p> | [
"zippo",
"zippostand",
"gridfinity"
] | Hobby & Makers > Organizers | [
"462115/images/image_1_compressed.jpg",
"462115/images/image_2_compressed.jpg",
"462115/images/image_3_compressed.jpg"
] | [
"462115/stls/Zippo gridfinity.stl"
] | CC-BY | https://www.printables.com/model/462115 | data_0040.tar |
883930 | Ziptie Holder for IKEA Skådis | <p>Container to fit 3 different sizes of zipties on the IKEA Skådis pegboard</p><p><strong>Print Instructions:</strong></p><p>-0.3mm layerheight for fast printing</p><p>-organic supports</p><p>-orientation upright</p> | [
"organizer",
"ikea",
"pegboard",
"skadis",
"ikeaskadis",
"skadisikea",
"zipties",
"skadisholder",
"ziptieholder",
"ziptieorganizer"
] | Hobby & Makers > Organizers | [
"883930/images/image_1_compressed.jpg"
] | [
"883930/stls/SkadisZiptie.stl"
] | CC-BY | https://www.printables.com/model/883930 | data_0040.tar |
209087 | Zip/Cable Tie | <p>This model is designed to utilize the last few meters of your filament spool to create a useful cable tie! My idea for the contest was I wanted something that would always be useful every time you printed it, and I've been wanting to try my hand at designing a printable cable tie for quite some time now. I find myse... | [
"cable",
"tie",
"computer",
"management",
"ziptie",
"cabletie",
"zip",
"zipties",
"wires",
"ties",
"lastmeters"
] | Hobby & Makers > Tools | [
"209087/images/image_1_compressed.jpg",
"209087/images/image_2_compressed.jpg",
"209087/images/image_3_compressed.jpg"
] | [
"209087/stls/ziptie.stl"
] | CC0 | https://www.printables.com/model/209087 | data_0040.tar |
370224 | zodiac astrology hairsticks | <h3><strong>TL;DR</strong></h3><p>The 12 zodiac signs on non zipping hair sticks.</p><p> </p><h3><strong>Collection</strong></h3><p><a href="https://www.printables.com/social/277533-yahbluez/collections/417438"><strong>https://www.printables.com/social/277533-yahbluez/collections/417438</strong></a></p><p> </... | [
"astrology",
"zodiac",
"astrologysigns",
"astrologie"
] | Fashion > Women | [
"370224/images/image_1_compressed.jpg",
"370224/images/image_10_compressed.jpg",
"370224/images/image_11_compressed.jpg",
"370224/images/image_12_compressed.jpg",
"370224/images/image_13_compressed.jpg",
"370224/images/image_14_compressed.jpg",
"370224/images/image_15_compressed.jpg",
"370224/images/i... | [
"370224/stls/aquarius.stl",
"370224/stls/aries.stl",
"370224/stls/cancer.stl",
"370224/stls/capricorn.stl",
"370224/stls/gemini.stl",
"370224/stls/leo.stl",
"370224/stls/libra.stl",
"370224/stls/pisces.stl",
"370224/stls/scorpio.stl",
"370224/stls/taurus.stl",
"370224/stls/virgo.stl",
"370224/... | GPL3.0 | https://www.printables.com/model/370224 | data_0040.tar |
47723 | ZODIAC Misumi DIY y-carriage clipper | <p>Easy snapable y-carriage LMU8 bearing clipper for your Prusa printer</p>
<p>Goal:</p>
<ul>
<li>create less force for a smooth run due to a better force distribution arround the whole reachable bearing surface</li>
<li>extends the lifetime of your bearings</li>
<li>due to the design, this clipper has a spring effect ... | [
"clipper",
"misumi",
"zodiac",
"ubolt"
] | 3D Printers > Other Printer Parts & Upgrades | [
"47723/images/image_1_compressed.jpg",
"47723/images/image_2_compressed.jpg",
"47723/images/image_3_compressed.jpg",
"47723/images/image_4_compressed.jpg",
"47723/images/image_5_compressed.jpg",
"47723/images/image_6_compressed.jpg"
] | [
"47723/stls/lm8u-zodiac-clipper.stl"
] | CC-BY | https://www.printables.com/model/47723 | data_0040.tar |
566880 | Zoe's Jewelry Stand | <p>Printed in PLA+ and PLA.</p> | [
"jewelryholder",
"jewelrytree",
"jewelrystand"
] | Fashion > Other Fashion Accessories | [
"566880/images/image_1_compressed.jpg"
] | [
"566880/stls/Zoes_Jewelry_Box_Base v1.stl",
"566880/stls/Zoes_Jewelry_Box_Top v1.stl"
] | CC-BY | https://www.printables.com/model/566880 | data_0040.tar |
560005 | Zombie - HueForge | <p>This is a filament painting of an awesome zombie. It was made by using Midjourney. Printed at 154x200 @ 2.mm</p><p>Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm</p><p><strong>Filaments Used:</strong></p><p>PrintBed Black</p><p>PrintBed Grey</p><p>Printbed White</p><p><strong>Sw... | [
"zombie",
"decoration",
"multimaterial",
"mmu",
"multicolor",
"decor",
"household",
"art",
"palette",
"multicolour",
"multicolored",
"mmu2s",
"mmu2",
"palette2",
"mosaicpalette",
"decorative",
"mmu3",
"artwork",
"bambu",
"bambulabx1",
"bambulab",
"bambulabx1carbon",
"ams"... | Art & Design > 2D Plates & Logos | [
"560005/images/image_1_compressed.jpg"
] | [
"560005/stls/zombie.stl"
] | CC-BY | https://www.printables.com/model/560005 | data_0040.tar |
1441715 | Zombie hand | <p>Zombie hand decoration in front of the housedecoration in front of the house. If u wanna u can print bigger its up 2 u</p> | [
"halloween",
"zombie",
"hand",
"scary",
"garden",
"halloweendecoration",
"scaryhalloween"
] | Seasonal designs > Autumn & Halloween | [
"1441715/images/image_1_compressed.jpg",
"1441715/images/image_2_compressed.jpg",
"1441715/images/image_3_compressed.jpg"
] | [
"1441715/stls/zombie hand.stl"
] | CC0 | https://www.printables.com/model/1441715 | data_0040.tar |
291976 | Zombie Raven | <p>Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: <a href="https://www.patreon.com/mz4250">https://www.patreon.com/mz4250</a></p><p>Patrons have access to all my files in one place, a request board, as well ... | [
"zombie",
"crow",
"raven"
] | Tabletop Miniatures > Characters & Monsters | [
"291976/images/image_1_compressed.jpg",
"291976/images/image_2_compressed.jpg"
] | [
"291976/stls/small creature flying marker.stl",
"291976/stls/Zombie Raven flying.stl",
"291976/stls/Zombie Raven presupported.stl",
"291976/stls/Zombie Raven.stl"
] | CC-BY | https://www.printables.com/model/291976 | data_0040.tar |
77220 | Zombies Updated | <p>Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250</p><p>Patrons have access to all my files in one place, a request board, as well as commercial and commission options! Come che... | [
"zombie"
] | Toys & Games > Board Games | [
"77220/images/image_1_compressed.jpg",
"77220/images/image_2_compressed.jpg",
"77220/images/image_3_compressed.jpg",
"77220/images/image_4_compressed.jpg",
"77220/images/image_5_compressed.jpg",
"77220/images/image_6_compressed.jpg"
] | [
"77220/stls/Zombie Female Pose 1 presupported.stl",
"77220/stls/Zombie Female Pose 1.stl",
"77220/stls/Zombie Female Pose 2 presupported.stl",
"77220/stls/Zombie Female Pose 2.stl",
"77220/stls/Zombie Female Pose 3.stl",
"77220/stls/Zombie Female presupported.stl",
"77220/stls/Zombie Male Pose 1 presupp... | CC-BY | https://www.printables.com/model/77220 | data_0040.tar |
789078 | Zoyi ZT-702S | [
"multimeterholder",
"zoyi"
] | Hobby & Makers > Electronics | [
"789078/images/image_1_compressed.jpg",
"789078/images/image_2_compressed.jpg"
] | [
"789078/stls/body ZOYI.stl"
] | CC0 | https://www.printables.com/model/789078 | data_0040.tar | |
706654 | Zuca Cart Handle Grips | <p>Unsatisfied with the current state of grips for Zuca cart, I've decided to create my own that forgoes the need of any set screws/adhesive/tape and solely relies on an extremely snug fit but with the ability to be somewhat removed.</p><p>I've provided an <a href="https://cad.onshape.com/documents/564bd95782f045889297... | [
"grip",
"tpu",
"handlegrip",
"disc",
"discgolf",
"zuca",
"zucacart",
"zucadiscgolf",
"zucagrip",
"zucahandle",
"zucahandlegrip"
] | Sports & Outdoor > Other Sports | [
"706654/images/image_1_compressed.jpg",
"706654/images/image_2_compressed.jpg",
"706654/images/image_3_compressed.jpg",
"706654/images/image_4_compressed.jpg",
"706654/images/image_5_compressed.jpg",
"706654/images/image_6_compressed.jpg",
"706654/images/image_7_compressed.jpg"
] | [
"706654/stls/Blank.stl",
"706654/stls/Circle Small.stl",
"706654/stls/Square Large.stl",
"706654/stls/Square Small.stl",
"706654/stls/Triangle.stl"
] | CC0 | https://www.printables.com/model/706654 | data_0040.tar |
514516 | Zulay Milk Frother Stand | <p>Stand for the Zulay milk frother - mounts using double-sided tape or adhesive.</p> | [
"bracket",
"frother",
"milkfrother",
"zulay"
] | Household > Kitchen | [
"514516/images/image_1_compressed.jpg",
"514516/images/image_2_compressed.jpg"
] | [
"514516/stls/frother_stand_v2_v1.stl"
] | CC0 | https://www.printables.com/model/514516 | data_0040.tar |
1138524 | Zweihaender - Dummy 13 | <p>A simple Zweihaender for the legendary Dummy 13.</p> | [
"sword",
"accessory",
"13",
"dummy",
"greatsword",
"zweihaender"
] | Toys & Games > Action Figures & Statues | [
"1138524/images/image_1_compressed.jpg",
"1138524/images/image_2_compressed.jpg",
"1138524/images/image_3_compressed.jpg",
"1138524/images/image_4_compressed.jpg"
] | [
"1138524/stls/Zweihaender_dummy13.stl"
] | CC-BY | https://www.printables.com/model/1138524 | data_0040.tar |
566907 | ZWO ASIAir Cable Clip | <p>Print Settings</p><p>Printer brand:</p><p>Prusa</p><p>Printer:</p><p>I3 MK3S</p><p>Rafts:</p><p>Doesn't Matter</p><p>Supports:</p><p>No</p><p>Infill:</p><p>20%</p><p>Filament brand:</p><p>Prusament</p><p>Filament color:</p><p>Black</p><p>Filament material:</p><p>PETG</p> | [
"holder",
"astrophotography",
"cableclip",
"astronomytelescope",
"zwo",
"asiair",
"zwoasi"
] | Learning > Physics & Astronomy | [
"566907/images/image_1_compressed.jpg",
"566907/images/image_2_compressed.jpg",
"566907/images/image_3_compressed.jpg",
"566907/images/image_4_compressed.jpg"
] | [
"566907/stls/ZWO_ASIAIR_PLUS_Cable_Clip v3.stl",
"566907/stls/ZWO_ASIAIR_PRO_Cable_Clip v1.stl"
] | CC-BY | https://www.printables.com/model/566907 | data_0040.tar |
707116 | ZWO ASIAir mini Cable Clip | <p>Adjusted to fit the Asiair Mini.</p> | [
"cablemanagement",
"cableholder",
"asiair",
"asiairmini"
] | Learning > Physics & Astronomy | [
"707116/images/image_1_compressed.jpg",
"707116/images/image_2_compressed.jpg",
"707116/images/image_3_compressed.jpg",
"707116/images/image_4_compressed.jpg"
] | [
"707116/stls/Asiari Mini cable holder closed loop 6 rows.stl",
"707116/stls/Asiari Mini cable holder closed loop side nobs.stl",
"707116/stls/Asiari Mini cable holder closed loop.stl",
"707116/stls/Asiari Mini cable holder.stl"
] | CC-BY | https://www.printables.com/model/707116 | data_0040.tar |
46697 | Zyklon Unterdruckventil - Cyclone vacuum valve | <p>Das ist ein Unterdruckventil für einen Zyklonabscheider. Es kann mit Hilfe der Feder eingestellt werden und verhindert das implodieren eures Sammelfasses.</p><p>This is a vacuum valve for a cyclone separator. It can be adjusted by means of the spring and prevents the implosion of your collection drum.</p> | [
"thingiverse",
"cyclone",
"cyclonevacuum",
"ventil",
"zyklon",
"zyklonabscheider"
] | Household > Outdoor & Garden | [
"46697/images/image_1_compressed.jpg",
"46697/images/image_2_compressed.jpg"
] | [
"46697/stls/zsb_unterdruckventil_gross_-_unterdruckventil_1_g.stl",
"46697/stls/zsb_unterdruckventil_gross_-_unterdruckventil_2_g.stl",
"46697/stls/zsb_unterdruckventil_gross_-_unterdruckventil_3_g.stl"
] | CC-BY | https://www.printables.com/model/46697 | data_0040.tar |
62861 | ZYLtech Texas/Huge spool holder. 5KG Spool! (4x 608 bearings) | <p>This spool holder will hold up to a 168mm wide spool. It uses 4 608 skateboard bearings with a low tolerance/loose fit on the actual rollers but it fits tight with a small bit of force required to slot them in. if you have strength issues or if your rollers want to pop up ever, it has an m4 hole through each bearing... | [
"608bearing",
"thingiverse",
"zyltech",
"bigspool",
"monsterspool",
"skateboardbearing",
"texasspool",
"5kg"
] | 3D Printers > Other Printer Parts & Upgrades | [
"62861/images/image_1_compressed.jpg",
"62861/images/image_2_compressed.jpg",
"62861/images/image_3_compressed.jpg"
] | [
"62861/stls/SpoolHolderv5.stl",
"62861/stls/v3_Loose fit.stl",
"62861/stls/v4_tight fit.stl"
] | CC-BY | https://www.printables.com/model/62861 | data_0040.tar |
915857 | Zyn Can Insert | <p>This is a can insert that you can use to divide new and old pouches. I printed at 103% on my X1C and it fit like a glove</p> | [
"organizer",
"nicotine",
"pouch",
"zyn",
"zyncan"
] | Hobby & Makers > Organizers | [
"915857/images/image_1_compressed.jpg"
] | [
"915857/stls/zyn can insert.stl"
] | CC-BY | https://www.printables.com/model/915857 | data_0040.tar |
415374 | Záložka do knihy - čtyřlístek (Bookmark - Cloverleaf) | <p>Záložka se vytiskne za cca 26 minut. </p> | [
"zalozka",
"kniha"
] | Household > Other House Equipment | [
"415374/images/image_1_compressed.jpg"
] | [
"415374/stls/Záložky do knihy - čtyřlístek.stl"
] | CC-BY | https://www.printables.com/model/415374 | data_0040.tar |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.