model_id stringlengths 1 7 | name stringlengths 2 210 | description stringlengths 0 253k | tags listlengths 0 494 | printables_category stringclasses 80
values | image_paths listlengths 0 289 | stl_paths listlengths 0 2.73k | license stringclasses 7
values | source stringlengths 34 40 | shard_file stringclasses 49
values |
|---|---|---|---|---|---|---|---|---|---|
560852 | Blank Molle Badge | Molle Patches | Molle tag (step ,stl) | <h3>Blank Molle tag 2mm</h3> | [
"bag",
"tag",
"mountain",
"patch",
"backpack",
"molle",
"mollesystem",
"molletag",
"mollemount"
] | Sports & Outdoor > Outdoor Sports | [
"560852/images/image_1_compressed.jpg",
"560852/images/image_2_compressed.jpg",
"560852/images/image_3_compressed.jpg",
"560852/images/image_4_compressed.jpg",
"560852/images/image_5_compressed.jpg",
"560852/images/image_6_compressed.jpg"
] | [
"560852/stls/Molle_blank_badge_Body 01.stl",
"560852/stls/Molle_blank_badge_Body 04.stl",
"560852/stls/M_Body 05 (2).stl"
] | CC0 | https://www.printables.com/model/560852 | data_0041.tar |
478144 | Blast Off (Tissue Holder) | <p>Print it out of contrasting colors</p><p>I printed the base at higher infill to help stability.</p><p>The fins will need to be glued in place but there is a slot to help guide them into the correct position.</p> | [
"box",
"rocket",
"tissue",
"kleenex"
] | Household > Home Decor | [
"478144/images/image_1_compressed.jpg"
] | [
"478144/stls/Base.stl",
"478144/stls/Body.stl",
"478144/stls/Fin.stl",
"478144/stls/MountFin.stl",
"478144/stls/Nozzle.stl",
"478144/stls/Top.stl"
] | CC0 | https://www.printables.com/model/478144 | data_0041.tar |
4706 | Blind plug for Ikea Platsa cabinets | <p>Plug for the threaded holes in the Platsa top/bottom plate. With 3mm hex to easily assemble them with a hex key from inside of the cabinet.</p>
<p>Have only printed them in PETG as that was the white filament I had at the moment, guess PLA will also work fine.</p>
<h3>Print instructions</h3><p>What I have used / upl... | [
"ikea",
"platsa"
] | Hobby & Makers > Other Ideas | [
"4706/images/image_1_compressed.jpg",
"4706/images/image_2_compressed.jpg",
"4706/images/image_3_compressed.jpg",
"4706/images/image_4_compressed.jpg",
"4706/images/image_5_compressed.jpg"
] | [
"4706/stls/platsa-plug.stl"
] | CC-BY | https://www.printables.com/model/4706 | data_0041.tar |
245626 | Blinds Facade clip |
<p>Replacement clips for holding up the top facade of most wooden blinds.</p>
<p>I printed in PLA with 100% infill and its seems to flex enough and hold fine, but could be done is other petg or ABS i guess if you want it stronger</p>
<h3>Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Creality</p>
<p c... | [
"thingiverse"
] | Household > Other House Equipment | [
"245626/images/image_1_compressed.jpg"
] | [
"245626/stls/Blind_Facade_Clip.stl"
] | CC-BY | https://www.printables.com/model/245626 | data_0041.tar |
257362 | Blink Mini Arm | <p>Requires M3 screws. A simple arm for mounting Blink Mini to a wall or aluminum extrusion-based 3d printer</p>
Category: Camera | [
"thingiverse",
"blink"
] | Gadgets > Photo & Video | [
"257362/images/image_1_compressed.jpg",
"257362/images/image_2_compressed.jpg",
"257362/images/image_3_compressed.jpg",
"257362/images/image_4_compressed.jpg",
"257362/images/image_5_compressed.jpg"
] | [
"257362/stls/Y123s_Arm_Base.stl",
"257362/stls/Y123s_Arm_end.stl",
"257362/stls/Y123s_MidArm.stl"
] | CC-BY | https://www.printables.com/model/257362 | data_0041.tar |
191857 | Blink Mini Camera Shelf for PLATSA | <p>I only found PLATSA holders for Blink Mini cameras requiring a magnet or they don't fit the PLATSA hole spacing. So I designed my own camera shelf you can simply screw in.</p><p>Print it with the face of the back plate down and you are good to go without supports. I went for PETG with 0.2mm layer height and 20% infi... | [
"ikea",
"enclosure",
"platsa",
"ikeaplatsa",
"blink",
"blinkmini"
] | 3D Printers > Accessories | [
"191857/images/image_1_compressed.jpg",
"191857/images/image_2_compressed.jpg",
"191857/images/image_3_compressed.jpg"
] | [
"191857/stls/Blink Mini Shelf.stl"
] | CC-BY | https://www.printables.com/model/191857 | data_0041.tar |
320954 | Blink Mini Wall Mount | <p>Created the model in Fusion 360. 20% infill with no brim or supports. Takes just over 2 hours to print. Wanted a mount to raise the camera and used two Command strips on the back for easy removal with no mess. Added a slot on the back to allow the cable to run behind and allow the mount to stay flush.</p> | [
"wall",
"wallmount"
] | Hobby & Makers > Electronics | [
"320954/images/image_1_compressed.jpg",
"320954/images/image_2_compressed.jpg",
"320954/images/image_3_compressed.jpg",
"320954/images/image_4_compressed.jpg",
"320954/images/image_5_compressed.jpg"
] | [
"320954/stls/Blink Mini wall mount.stl"
] | CC0 | https://www.printables.com/model/320954 | data_0041.tar |
356237 | Block (THE BLOCK) | <p>You have to use much fillament. </p><p>So please print with an 100% infill :)</p> | [
"test",
"block",
"bench",
"useless"
] | 3D Printers > Test Models | [
"356237/images/image_1_compressed.jpg",
"356237/images/image_2_compressed.jpg",
"356237/images/image_3_compressed.jpg"
] | [
"356237/stls/Block.stl"
] | CC0 | https://www.printables.com/model/356237 | data_0041.tar |
612084 | Block and Tackle | <p>The <a href="https://en.wikipedia.org/wiki/Block_and_tackle">block and tackle</a> is an ancient machine said to have been perfected by <a href="https://en.wikipedia.org/wiki/Archimedes">Archimedes</a> over two thousand years ago. The machine is a number of pulleys with a cable between them allowing for lifting loads... | [
"pulley"
] | Household > Other House Equipment | [
"612084/images/image_1_compressed.jpg",
"612084/images/image_2_compressed.jpg"
] | [
"612084/stls/block_and_tackle_10_6004_12_double_8_c_s_s_double_8_c_n_plate1.stl",
"612084/stls/block_and_tackle_10_6004_12_double_8_c_s_s_double_8_c_n_plate2.stl",
"612084/stls/block_and_tackle_10_6004_12_single_8_c_s_s_single_8_cable_n.stl",
"612084/stls/block_and_tackle_4_608_5_double_a_c_s_s_double_a_c_n.s... | CC-BY | https://www.printables.com/model/612084 | data_0041.tar |
421966 | blocky buddy | <h3><strong>TL;DR</strong></h3><p>Jo Prusas pug buddy remixed in tilted blocky mode to get the most reflections.</p><p> </p><h3><strong>Collection</strong></h3><p><a href="https://www.printables.com/social/277533-yahbluez/collections/544196">tilted blocks</a></p><p> </p><h3><strong>Motivation</strong></h3><p>... | [
"buddy",
"pug",
"blocky"
] | Art & Design > Sculptures | [
"421966/images/image_1_compressed.jpg",
"421966/images/image_2_compressed.jpg",
"421966/images/image_3_compressed.jpg",
"421966/images/image_4_compressed.jpg",
"421966/images/image_5_compressed.jpg",
"421966/images/image_6_compressed.jpg",
"421966/images/image_7_compressed.jpg"
] | [
"421966/stls/blocky buddy bambustudio.stl",
"421966/stls/blocky buddy prusaslicer.stl",
"421966/stls/blocky buddy.stl"
] | GPL3.0 | https://www.printables.com/model/421966 | data_0041.tar |
431677 | Blocky Trophy / Nearly-Voxel Trophy | <p>This is a small trophy with a blocky design. At full-size, the trophy cup inserted into the base is 12 cm tall.</p><p>The cup of the trophy fits into the base with 0.2mm gaps on all sides, for a total of 0.4mm X and 0.4mm Y. Glue is optional, but may be needed if the gaps are too wide.</p><p>The sample photo was pri... | [
"trophy",
"voxel",
"award",
"blocky"
] | Art & Design > Other Art & Designs | [
"431677/images/image_1_compressed.jpg"
] | [
"431677/stls/base-for-nearly-voxel-trophy.stl",
"431677/stls/nearly-voxel-trophy.stl",
"431677/stls/simpler-base-for-nearly-voxel-trophy.stl"
] | CC-BY | https://www.printables.com/model/431677 | data_0041.tar |
375762 | Blokus parts created with adcurtin's script | <p>I realized that if you lose one piece, the whole game is useless. So when I took it on a trip with 15 kids I got very afraid and was looking for replacement pieces here.</p><p>This configuration of <a href="https://www.printables.com/social/15474-adcurtin">adcurtin</a>'s script works good enough for me with the blok... | [
"game",
"parts",
"blockus",
"blokus"
] | Toys & Games > Board Games | [
"375762/images/image_1_compressed.jpg",
"375762/images/image_2_compressed.jpg",
"375762/images/image_3_compressed.jpg",
"375762/images/image_4_compressed.jpg"
] | [
"375762/stls/blockus_piece - all.stl"
] | CC-BY | https://www.printables.com/model/375762 | data_0041.tar |
520933 | Bloodworm Fish Feeder | <p>Tank Rim Thickness: 12mm</p><p>Printed With: White PETG (Any filament type would do)</p><p>The hinge is made from the filament. It might be hard to push it in so you'll need to enlarge the holes. Make sure that the joints are moving smoothly. </p><p>If you need a different rim clip that fits your tank, let me k... | [
"feeder",
"aquarium",
"food",
"fish",
"frozen",
"worms"
] | Household > Pets | [
"520933/images/image_1_compressed.jpg",
"520933/images/image_2_compressed.jpg",
"520933/images/image_3_compressed.jpg"
] | [
"520933/stls/arm.stl",
"520933/stls/basket.stl",
"520933/stls/rim clip-12mm.stl"
] | CC-BY | https://www.printables.com/model/520933 | data_0041.tar |
1371796 | BloomBowl – Petals of Elegance | <p>Where jewelry meets nature’s finest form…<br>BloomBowl is a rose-shaped jewelry dish that combines elegance with everyday functionality. Designed to gently cradle rings, earrings, and small accessories among its petal-like curves, it adds a romantic charm to your vanity.</p><p>Perfect for PLA or silk filament printi... | [
"organizer",
"holder",
"flower",
"jewelry",
"gift",
"rose",
"romantic",
"feminine"
] | Art & Design > Other Art & Designs | [
"1371796/images/image_1_compressed.jpg",
"1371796/images/image_2_compressed.jpg"
] | [
"1371796/stls/6d9c920180f753f81b3f53f6151209c9.stl"
] | CC0 | https://www.printables.com/model/1371796 | data_0041.tar |
197635 | BLTouch Cover for Thing 4637453 |
<p>I wanted to use this BLTouch cover for thing 4637453 but had to make some adjustments due to the BLTouch Cable being on the outer side. I also added little clips so there is no need to worry about the print weakening over time and falling off.</p>
<h3>Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>... | [
"thingiverse",
"bltouch",
"satsana"
] | 3D Printers > Accessories | [
"197635/images/image_1_compressed.jpg",
"197635/images/image_2_compressed.jpg"
] | [
"197635/stls/BLTouchCoverSatsana.stl"
] | CC-BY | https://www.printables.com/model/197635 | data_0041.tar |
59192 | Blue Yeti Desk Stand | <p>The stand in the photo is the 100mm version, but I also include a 75mm version that is a bit smaller. That should fit with the cord.</p><p>The knob use a normal M6 Hex screw bolt 20mm. Normal 6 sided head (bolt head).</p> | [
"microphone",
"yeti",
"microphonemount",
"deskstand",
"microphonestand",
"blueyeti"
] | Gadgets > Audio | [
"59192/images/image_1_compressed.jpg",
"59192/images/image_2_compressed.jpg"
] | [
"59192/stls/Knob-Cap-MicStand.stl",
"59192/stls/Knob-MicStand.stl",
"59192/stls/MicStand-Yeti-100mm.stl",
"59192/stls/MicStand-Yeti-75mm.stl"
] | CC-BY | https://www.printables.com/model/59192 | data_0041.tar |
185484 | Blue Yeti USB connector protector |
<p>As you can see, my Blue Yeti has suffered some damage to its mini USB connector (I will replace it soon), but maybe this little thing will help you prevent damage to yours. Basically it forces you to push the USB cable in and out exactly straight (as opposed to on an angle which will eventually damage the USB con... | [
"thingiverse"
] | Household > Office | [
"185484/images/image_1_compressed.jpg",
"185484/images/image_2_compressed.jpg",
"185484/images/image_3_compressed.jpg"
] | [
"185484/stls/Blue_Yeti_cable_protector_v3.stl"
] | CC-BY | https://www.printables.com/model/185484 | data_0041.tar |
35299 | Blueberry picking MUG | <p>Looks ordinary, but in reality this mug is specially designed to be really handy for picking blueberries or similar fruits.</p><p>Main advantages of the design:</p><ul><li>Overall low weight thanks to minimize amount of material</li><li>Funnel at the top to make it easy to pour in</li><li>Narrowed throat that preven... | [
"mug",
"thingiverse",
"blueberries",
"blueberry"
] | Household > Outdoor & Garden | [
"35299/images/image_1_compressed.jpg",
"35299/images/image_2_compressed.jpg",
"35299/images/image_3_compressed.jpg",
"35299/images/image_4_compressed.jpg",
"35299/images/image_5_compressed.jpg",
"35299/images/image_6_compressed.jpg",
"35299/images/image_7_compressed.jpg",
"35299/images/image_8_compres... | [
"35299/stls/blueberry-mug-base_by_phigl.stl",
"35299/stls/blueberry-mug_by_phigl.stl"
] | CC-BY | https://www.printables.com/model/35299 | data_0041.tar |
516054 | Bluetooth Audio Receiver case | <p>I made a mini case to this Bluetooth Audio Receiver: <a href="https://www.aliexpress.com/item/1005002231624213.html">https://www.aliexpress.com/item/1005002231624213.html</a></p> | [
"case",
"bluetooth",
"receiver"
] | Gadgets > Audio | [
"516054/images/image_1_compressed.jpg",
"516054/images/image_2_compressed.jpg",
"516054/images/image_3_compressed.jpg"
] | [
"516054/stls/bt_a_r_case.stl",
"516054/stls/bt_a_r_lid.stl"
] | CC0 | https://www.printables.com/model/516054 | data_0041.tar |
840867 | Bluey logo | <p>This is a 3d model of the Bluey cartoon logo.</p> | [
"bluey"
] | Art & Design > 2D Plates & Logos | [
"840867/images/image_1_compressed.jpg"
] | [
"840867/stls/bluey_logo.stl"
] | CC0 | https://www.printables.com/model/840867 | data_0041.tar |
928891 | Bluey Style Font Letter | <p>A collection of letters and numbers inspired by Bluey. They can be used to create custom name signs for your kids.</p><p> </p><p>If you would like to have the STL file made for you. They can be ordered here. </p><p>https://www.etsy.com/listing/1741241770/custom-bluey-style-name-plate-stl-file</p> | [
"font",
"kids",
"letters",
"text",
"tvshow",
"bluey"
] | Art & Design > Other Art & Designs | [
"928891/images/image_1_compressed.jpg",
"928891/images/image_2_compressed.jpg"
] | [
"928891/stls/Bluey-1.stl",
"928891/stls/Bluey-Ii.stl",
"928891/stls/Bluey-J.stl",
"928891/stls/Bluey_2.stl",
"928891/stls/Bluey_4.stl",
"928891/stls/Bluey_5.stl",
"928891/stls/Bluey_6.stl",
"928891/stls/Bluey_7.stl",
"928891/stls/Bluey_8.stl",
"928891/stls/Bluey_9.stl",
"928891/stls/Bluey_A.stl"... | CC-BY | https://www.printables.com/model/928891 | data_0041.tar |
911371 | Blumenvase, optimal auch für LEGO Blumen | <p>ich habe es mit 0,1mm Schichtstärke gedruckt. War im Anschluss auch wasserdicht.</p> | [
"vase",
"nice",
"deko"
] | Household > Home Decor | [
"911371/images/image_1_compressed.jpg",
"911371/images/image_2_compressed.jpg",
"911371/images/image_3_compressed.jpg",
"911371/images/image_4_compressed.jpg",
"911371/images/image_5_compressed.jpg"
] | [
"911371/stls/Vase.stl"
] | CC0 | https://www.printables.com/model/911371 | data_0041.tar |
63386 | BLV MGN Cube metal kit bearing tool | [
"tool",
"cube",
"kit",
"metal",
"mgn",
"blv"
] | 3D Printers > Other Printer Parts & Upgrades | [
"63386/images/image_1_compressed.jpg",
"63386/images/image_2_compressed.jpg"
] | [
"63386/stls/Bearing tool.stl"
] | CC0 | https://www.printables.com/model/63386 | data_0041.tar | |
893393 | BME280 SHT31 SHT30 SHT3x housing with strain relief | [
"sht31",
"homeassistant",
"bme280",
"esphome",
"sensors",
"sht30",
"sht3x"
] | Hobby & Makers > Electronics | [
"893393/images/image_1_compressed.jpg"
] | [] | CC-BY | https://www.printables.com/model/893393 | data_0041.tar | |
239428 | BMW E34 cup holder | <p>I really hate, when people charges stupid amount of money for models, which are easy to make… so i drew this one, in five minutes and here it is for free :) enjoy </p> | [
"cup",
"holder",
"cupholder",
"bmw",
"e34",
"bmw5",
"bimmer"
] | Hobby & Makers > Automotive | [
"239428/images/image_1_compressed.jpg",
"239428/images/image_2_compressed.jpg",
"239428/images/image_3_compressed.jpg"
] | [
"239428/stls/E34cupHolderV2.stl"
] | CC0 | https://www.printables.com/model/239428 | data_0041.tar |
533411 | BMW M5 E30 Mini Wall Sculpture | Just a small print in place BMW M5 E30 Mini Wall Sculpture | Download free 3D printable STL models | [
"wall",
"mini",
"art",
"car",
"wallmount",
"bmw",
"m5"
] | Art & Design > Wall-mounted | [
"533411/images/image_1_compressed.jpg"
] | [
"533411/stls/e30 Wall Sculpture.stl"
] | CC0 | https://www.printables.com/model/533411 | data_0041.tar |
79095 | BMW Wireless Charging Mod F3x F8x I01 | <p>Remix von <a href="https://www.thingiverse.com/thing:4599572">https://www.thingiverse.com/thing:4599572</a><br/>
Schriftzug auf BMW abgeändert.<br/>
Erweiterung bzw. Austauschteil für den Original Schieber am Wireless Charger.<br/>
Passend auch für F3x, F8x und I01 (I3) mit Wireless Charging Ablage.<br/>
Die Abl... | [
"wirelesscharger",
"bmw",
"thingiverse",
"chargingcradle",
"wirelesscharging",
"f3x"
] | Hobby & Makers > Automotive | [
"79095/images/image_1_compressed.jpg",
"79095/images/image_2_compressed.jpg",
"79095/images/image_3_compressed.jpg",
"79095/images/image_4_compressed.jpg"
] | [
"79095/stls/Wireless_Charging_Mod_BMW_F2x_F3x_I01.stl"
] | CC-BY | https://www.printables.com/model/79095 | data_0041.tar |
475685 | Bo-Katan Funko Style Coaster | <p>Continuing with my Mandalorian Funko style coasters, here's Bo-Katan! </p><p>The color layer changes are a little tricky here, so use the included gcode file, or refer to the uploaded picture for where to change colors.</p><p>Happy printing and this is the way. </p> | [
"starwars",
"coaster",
"mandalorian",
"drinkcoaster",
"funko",
"thisistheway",
"bokatan"
] | Art & Design > Other Art & Designs | [
"475685/images/image_1_compressed.jpg",
"475685/images/image_2_compressed.jpg"
] | [
"475685/stls/BoKatanFunkoCoaster.stl"
] | CC-BY | https://www.printables.com/model/475685 | data_0041.tar |
1216081 | Board alignment insert for Heat: Pedal to the Metal expansion insert ( supports 4 boards) | <p>Print with lightning infill to save a couple of hours (and a fair bit of filament). It printed hollow for me with these settings, is very light but seems to work really well.</p><p>No supports required, piece is literally a buffer to sit between your boards and your box. </p> | [] | Toys & Games > Board Games | [
"1216081/images/image_1_compressed.jpg"
] | [
"1216081/stls/heat-pedal-to-the-metal-board-insert-fill-four-boards.stl"
] | CC-BY | https://www.printables.com/model/1216081 | data_0041.tar |
823973 | Board game coins (v2) - from 1 to 5000 denominations | <p>Print amount for full board game (small variant):</p><p>Castles of Mad King Ludwig: 48x 1000, 30x 5000</p><p>For sale: 84x 1000</p><p>Coins are defined in attached openscad source and it is easy to define your own sizes and denominations there.</p><p>Note: you need good plate adhesion, so check that your plate is cl... | [
"coin",
"money",
"game",
"boardgame",
"token",
"openscad"
] | Toys & Games > Board Games | [
"823973/images/image_1_compressed.jpg",
"823973/images/image_2_compressed.jpg",
"823973/images/image_3_compressed.jpg"
] | [
"823973/stls/coin-large-1.stl",
"823973/stls/coin-large-10.stl",
"823973/stls/coin-large-100.stl",
"823973/stls/coin-large-1000.stl",
"823973/stls/coin-large-2.stl",
"823973/stls/coin-large-20.stl",
"823973/stls/coin-large-200.stl",
"823973/stls/coin-large-2000.stl",
"823973/stls/coin-large-5.stl",
... | CC-BY | https://www.printables.com/model/823973 | data_0041.tar |
1567606 | Board Game: Kung Fu Cats | <p>[EN]<br>Board game balancer for children and adults. This is an exciting board game inspired by the classic Jenga game.</p><p>What's the point? Each player takes a cat. Your task is to build a tower of these figures, adding one cat on top. But be careful! Each new cat can upset the balance of the entire structure.</... | [
"cat",
"friends",
"balance",
"education",
"boardgame",
"entertainment"
] | Toys & Games > Board Games | [
"1567606/images/image_1_compressed.jpg",
"1567606/images/image_2_compressed.jpg",
"1567606/images/image_3_compressed.jpg",
"1567606/images/image_4_compressed.jpg"
] | [
"1567606/stls/Kung fu cat (1).stl",
"1567606/stls/Kung fu cat (2).stl",
"1567606/stls/Kung fu cat (3).stl",
"1567606/stls/Kung fu cat (4).stl",
"1567606/stls/Kung fu cat (5).stl",
"1567606/stls/Kung fu cat (6).stl",
"1567606/stls/Kung fu cat (7).stl",
"1567606/stls/Kung fu cat (8).stl",
"1567606/stl... | LGPL | https://www.printables.com/model/1567606 | data_0041.tar |
142177 | Boba Fett Blaster Pistol |
<p>Here's my version of Boba Fett's Blaster pistol from The Mandalorian/Book of Boba Fett. Just print out all the part files and glue them together(I split it up for my resin printer)</p>
<p>be sure to post a make and check out my other designs</p>
<p>If you like my work you can buy me a kofi, <a href="https://ko-fi... | [
"starwars",
"bobafett",
"thingiverse",
"bookofbobafett"
] | Costumes & Accessories > Props | [
"142177/images/image_1_compressed.jpg",
"142177/images/image_2_compressed.jpg",
"142177/images/image_3_compressed.jpg",
"142177/images/image_4_compressed.jpg",
"142177/images/image_5_compressed.jpg",
"142177/images/image_6_compressed.jpg"
] | [
"142177/stls/barrel_.stl",
"142177/stls/barrel_2_.stl",
"142177/stls/handle.stl"
] | CC-BY | https://www.printables.com/model/142177 | data_0041.tar |
464780 | Boba Fett Coaster Funko Style | <p>I'm turning these Mandalorian Funko style coasters into a series. Next up is Boba Fett!</p> | [
"starwars",
"bobafett",
"coaster",
"mandalorian",
"drinkcoaster"
] | Art & Design > Other Art & Designs | [
"464780/images/image_1_compressed.jpg",
"464780/images/image_2_compressed.jpg",
"464780/images/image_3_compressed.jpg"
] | [
"464780/stls/BobaFettFunkoCoaster.stl"
] | CC-BY | https://www.printables.com/model/464780 | data_0041.tar |
276795 | Bobbling Death Star | <p>This is a bobble-head Star Wars Death Star model. This toy uses a 3D printed base and spring and has a recess in the base that will hold a 8mm magnet.</p><p>The Death Star is printed in 2 parts and they will need to be glued together. Supports are only needed for the top half and you can use minimal infill (10% is f... | [
"starwars",
"deathstar",
"thingiverse",
"bobblehead"
] | Toys & Games > Other Toys & Games | [
"276795/images/image_1_compressed.jpg",
"276795/images/image_2_compressed.jpg",
"276795/images/image_3_compressed.jpg",
"276795/images/image_4_compressed.jpg",
"276795/images/image_5_compressed.jpg",
"276795/images/image_6_compressed.jpg",
"276795/images/image_7_compressed.jpg"
] | [
"276795/stls/42mm-base-8mag.stl",
"276795/stls/bobbling_deathstar-btm.stl",
"276795/stls/bobbling_deathstar-top.stl",
"276795/stls/pisa-bob-spring.stl",
"276795/stls/pisa-bob-tool.stl"
] | CC-BY | https://www.printables.com/model/276795 | data_0041.tar |
948980 | Boeing 747 | <p>Supports needed </p> | [] | Tabletop Miniatures > Vehicles & Machines | [
"948980/images/image_1_compressed.jpg"
] | [
"948980/stls/400.stl"
] | CC0 | https://www.printables.com/model/948980 | data_0041.tar |
241578 | Bolt Circle Diameter Tool |
<p>Used to read off the bolt circle diameter or BCD of 4 & 5 arm cranksets so you can swap out chainrings.</p>
<h3>Design</h3>
<p>I chose the numbers based off of what Park Tool decided were common BCDs.</p>
<p>Scaled the reference image knowing the pivot nut measures 3/8" across the flats. Uses a 10-32 stud, bu... | [
"tool",
"circle",
"measure",
"bolt",
"bike",
"chainring",
"thingiverse",
"diameter",
"bcd"
] | Hobby & Makers > Tools | [
"241578/images/image_1_compressed.jpg",
"241578/images/image_2_compressed.jpg",
"241578/images/image_3_compressed.jpg",
"241578/images/image_4_compressed.jpg",
"241578/images/image_5_compressed.jpg",
"241578/images/image_6_compressed.jpg",
"241578/images/image_7_compressed.jpg",
"241578/images/image_8... | [
"241578/stls/Arm.stl",
"241578/stls/Assembly.stl",
"241578/stls/Body.stl",
"241578/stls/Point_LONG.stl",
"241578/stls/Point_SHORT.stl"
] | CC-BY | https://www.printables.com/model/241578 | data_0041.tar |
538417 | Bolt sorter screen - M2 | <p><a target="_blank" rel="noopener noreferrer nofollow" class="editor-link" href="https://www.patreon.com/posts/bolt-sorting-158298847?utm_medium=clipboard_copy&utm_source=copyLink&utm_campaign=postshare_creator&utm_content=join_link">Info on the bolt sorter, and links to other screens, can be found here.<... | [
"screw",
"bolt",
"metric",
"fastener",
"thingiverse",
"sorter",
"shcs",
"bhcs"
] | Hobby & Makers > Tools | [
"538417/images/image_1_compressed.jpg",
"538417/images/image_2_compressed.jpg",
"538417/images/image_3_compressed.jpg",
"538417/images/image_4_compressed.jpg",
"538417/images/image_5_compressed.jpg"
] | [
"538417/stls/Screen_m2.stl"
] | GPL3.0 | https://www.printables.com/model/538417 | data_0041.tar |
538420 | Bolt sorter screen - M3 | <p><a target="_blank" rel="noopener noreferrer nofollow" class="editor-link" href="https://www.patreon.com/posts/bolt-sorting-158298847?utm_medium=clipboard_copy&utm_source=copyLink&utm_campaign=postshare_creator&utm_content=join_link">Info on the bolt sorter, and links to other screens, can be found here.<... | [
"organizer",
"screw",
"sort",
"sorting",
"bolt",
"metric",
"fastener",
"thingiverse",
"sorter",
"shcs",
"bhcs"
] | Hobby & Makers > Tools | [
"538420/images/image_1_compressed.jpg",
"538420/images/image_2_compressed.jpg",
"538420/images/image_3_compressed.jpg",
"538420/images/image_4_compressed.jpg",
"538420/images/image_5_compressed.jpg"
] | [
"538420/stls/Screen_m3.stl"
] | GPL3.0 | https://www.printables.com/model/538420 | data_0041.tar |
527254 | Bolt Stash | <p><strong>Background </strong><br>I've seen metal bolts with a hollowed-out shaft and a removable cap before and always wanted to make one myself but just didn't really have the tool setup to do it. When I recently printed a clamp for my desktop and looked at the bolt it came with, I immediately thought it ... | [
"container",
"secret",
"storage",
"hidden",
"moneystash"
] | Gadgets > Other Gadgets | [
"527254/images/image_1_compressed.jpg",
"527254/images/image_2_compressed.jpg",
"527254/images/image_3_compressed.jpg",
"527254/images/image_4_compressed.jpg",
"527254/images/image_5_compressed.jpg",
"527254/images/image_6_compressed.jpg",
"527254/images/image_7_compressed.jpg"
] | [
"527254/stls/Bolt Stash - Cap.stl",
"527254/stls/Bolt Stash - Nut v3.stl",
"527254/stls/Bolt Stash - Shaft v2.stl",
"527254/stls/Bolt Stash - Shaft v3.stl",
"527254/stls/Bolt Stash - Shaft.stl",
"527254/stls/Bolt Stash.stl"
] | CC-BY | https://www.printables.com/model/527254 | data_0041.tar |
414542 | Bonchy Wave Stand | <p>No supports or special slicing required. It looks great with translucent blue filament.</p> | [
"benchy",
"wave",
"3dbenchy",
"bonchy"
] | Art & Design > Sculptures | [
"414542/images/image_1_compressed.jpg"
] | [
"414542/stls/BONCHY_WAVE.stl"
] | CC-BY | https://www.printables.com/model/414542 | data_0041.tar |
232865 | bone (os) | [
"toy",
"dog",
"bone",
"os"
] | Art & Design > Sculptures | [
"232865/images/image_1_compressed.jpg",
"232865/images/image_2_compressed.jpg",
"232865/images/image_3_compressed.jpg"
] | [
"232865/stls/nonos.stl"
] | CC0 | https://www.printables.com/model/232865 | data_0041.tar | |
1691183 | Bonehandle Skull Mug | <p><strong>Bonehandle Skull Mug</strong> – A bold and darkly elegant 3D printable coffee mug!</p><p>This striking skull mug features highly detailed anatomy with realistic teeth, cracks, and texture. The standout feature is the unique <strong>bone handle</strong> shaped like a skeletal arm and joint, giving it a perfec... | [
"halloween",
"cup",
"3d",
"skull",
"handle",
"printed",
"decor",
"dark",
"horror",
"gothic",
"mug",
"coffee",
"printable",
"drinkware",
"creepy",
"skeleton",
"bone",
"fdm",
"aesthetic",
"memento",
"mori"
] | Toys & Games > Other Toys & Games | [
"1691183/images/image_1_compressed.jpg"
] | [
"1691183/stls/reduced_color (1).stl",
"1691183/stls/single_color (1).stl"
] | CC0 | https://www.printables.com/model/1691183 | data_0041.tar |
955446 | Bones for dummy 13 Deadpool | <p>These are the bones needed to assemble the dummy 13 Deadpool </p><p><a href="https://cults3d.com/en/3d-model/art/dummy13-deadpool-by-3dnuevo">https://cults3d.com/en/3d-model/art/dummy13-deadpool-by-3dnuevo</a></p><p>I ordered them by color, prin with PLA+ or Petg</p> | [
"dummy13"
] | Toys & Games | [
"955446/images/image_1_compressed.jpg",
"955446/images/image_2_compressed.jpg"
] | [
"955446/stls/accesorios_.stl",
"955446/stls/BLACK BONES.stl",
"955446/stls/deadpool bones.stl",
"955446/stls/hands.stl",
"955446/stls/RED BONES_.stl"
] | CC-BY | https://www.printables.com/model/955446 | data_0041.tar |
44782 | Bong cookie cutter | <p>An original biscuit or cookie cutter in the shape of a bong. For fans and bong smokers and customers of <a href="https://bongarna.cz">https://bongarna.cz</a> shop</p>
<h3>Print instructions</h3><p>Draft 0,3 10% infill</p> | [] | Household > Kitchen | [
"44782/images/image_1_compressed.jpg"
] | [
"44782/stls/bongarna-forma.stl"
] | CC0 | https://www.printables.com/model/44782 | data_0041.tar |
520010 | Bookend | <p>Bookend</p> | [
"bookend"
] | Household > Home Decor | [
"520010/images/image_1_compressed.jpg",
"520010/images/image_2_compressed.jpg"
] | [
"520010/stls/Part Studio 1 - Part 1.stl"
] | CC0 | https://www.printables.com/model/520010 | data_0041.tar |
344135 | Booker the bookworm bookmarker | <p>Meet Booker the bookworm bookmarker!</p><p>It's a simple bookmarker that can be printed multicolor, you just need to change the colors at the right height.</p><p>For 0.2 mm layer height:</p><ul><li>First 3 layers the body color</li><li>Layers 4 to 7 inclusive the color of the eyes</li><li>The remaining layers with t... | [] | Hobby & Makers > Other Ideas | [
"344135/images/image_1_compressed.jpg",
"344135/images/image_2_compressed.jpg"
] | [
"344135/stls/Booker_bookWorm_v01.stl"
] | CC0 | https://www.printables.com/model/344135 | data_0041.tar |
847530 | bookmark punt de llibre marcador sant jordi | <p>altura de capa 0.2 para mantener la altura de 0,4 en el separador de paginas </p> | [
"dragon",
"book",
"bookmark",
"santjordi"
] | Household > Other House Equipment | [
"847530/images/image_1_compressed.jpg",
"847530/images/image_2_compressed.jpg",
"847530/images/image_3_compressed.jpg"
] | [] | CC0 | https://www.printables.com/model/847530 | data_0041.tar |
1260052 | Bookmark - Hexagon Pattern (Case Study in Textures) | <p>Case Study in textures</p><p>A bookmark with a hexagon pattern similar to a turtle shell pattern.</p><p> </p><p>A hexagon pattern was created in a 2D sketch. The hexagons were extruded on top of a bookmark object starting from the top plane of the bookmark (bookmark hexagon - fusion360.png).</p><p>The bookmark ... | [
"hexagonal",
"hexagon",
"functional",
"book",
"turtle",
"bookmark",
"pattern",
"simple",
"functionalprint",
"library",
"books",
"bookmarks",
"simpleprint",
"simpledesign",
"hexagonpattern"
] | Household > Office | [
"1260052/images/image_1_compressed.jpg",
"1260052/images/image_2_compressed.jpg",
"1260052/images/image_3_compressed.jpg"
] | [
"1260052/stls/bookmark hexagon.stl"
] | CC-BY | https://www.printables.com/model/1260052 | data_0041.tar |
341247 | Bookmark Christmas Cat | Bookmark Christmas Cat | Download free 3D printable STL models | [
"christmas",
"cat",
"book",
"gift",
"love",
"bookmark",
"tree",
"christmastree",
"meowy",
"moew"
] | Household > Office | [
"341247/images/image_1_compressed.jpg",
"341247/images/image_2_compressed.jpg"
] | [
"341247/stls/Cat_Bookmark v0.stl"
] | CC0 | https://www.printables.com/model/341247 | data_0041.tar |
1396472 | Books read this year | <p>Use this to mark the number of books you have read! This has multicolor prints ready to be sliced and files that have not been colored. I hope you enjoy!</p><p>Edit: added a stand (print 2) and a loopless version! enjoy!</p> | [
"decor",
"counter",
"books",
"bookdecor"
] | Household > Home Decor | [
"1396472/images/image_1_compressed.jpg"
] | [
"1396472/stls/BRTY_Labels.stl",
"1396472/stls/BRTY_labels_colored.stl",
"1396472/stls/BRTY_sign.stl",
"1396472/stls/BRTY_sign_colored.stl",
"1396472/stls/BRTY_without_hooks.stl",
"1396472/stls/stand_brty_2x.stl"
] | CC-BY | https://www.printables.com/model/1396472 | data_0041.tar |
1299370 | Books Read This Year Sign | <p>My wife found a picture of a sign like this on Facebook and wanted me to design something similar. I printed her a sloth to go next to the blocks, but you can put anything there if you want.</p><p>The shelf does require supports. </p><p><strong>Edit: </strong>I added an updated file with more books on top... | [] | Art & Design > Other Art & Designs | [
"1299370/images/image_1_compressed.jpg",
"1299370/images/image_2_compressed.jpg"
] | [
"1299370/stls/#Block Single Color 100% scale.stl",
"1299370/stls/#BlockPainted 100% Scale.stl",
"1299370/stls/#BlocksPainted 145%..stl",
"1299370/stls/Bookshelf-NoWords-Single Color 100% Scale.stl",
"1299370/stls/BookshelfUpdated 145% Scale with books on top.stl",
"1299370/stls/BooksReadShelfPainted 100% ... | CC-BY | https://www.printables.com/model/1299370 | data_0041.tar |
1330901 | Boop boardgame pieces | <p>Replacement pieces for boardgame Boop.</p><p>To play the game you'll need 16 kittens (8 each color) and 16 cats (8 each color) and a 6x6 grid board.</p><p><strong>Have fun!</strong></p> | [
"cat",
"game",
"boardgame",
"kitten",
"nosupport",
"pieces",
"boop"
] | Toys & Games > Board Games | [
"1330901/images/image_1_compressed.jpg",
"1330901/images/image_2_compressed.jpg"
] | [
"1330901/stls/boop v1.stl"
] | CC0 | https://www.printables.com/model/1330901 | data_0041.tar |
409034 | Boot Badewanne | <p>Ein schwimmfähiges Boot für die Badewanne.</p>
Category: Vehicles | [
"thingiverse"
] | Toys & Games > Vehicles | [
"409034/images/image_1_compressed.jpg",
"409034/images/image_2_compressed.jpg",
"409034/images/image_3_compressed.jpg",
"409034/images/image_4_compressed.jpg",
"409034/images/image_5_compressed.jpg",
"409034/images/image_6_compressed.jpg"
] | [
"409034/stls/Boot Badewanne.stl"
] | CC-BY | https://www.printables.com/model/409034 | data_0041.tar |
899529 | Bora Double P-Top | <p>I modeled this to allow me to make mounting dual tops side by side easier. I did not add the 4 slots to use the hanger accessories. If there is a desire I can add them in. </p><p>I printed in PLA with the top surface down using some supports on the center counter-bore. I suspect it would print fine in the botto... | [
"centipede",
"bora"
] | Household > Garage | [
"899529/images/image_1_compressed.jpg",
"899529/images/image_2_compressed.jpg"
] | [
"899529/stls/Ptop-Body.stl",
"899529/stls/Ptop4-WIP.stl"
] | CC0 | https://www.printables.com/model/899529 | data_0041.tar |
834238 | Bosch 18V Battery Wall-Mount | <p>This is a remix of @arthur_272101's Model: <a href="https://www.printables.com/de/model/">https://www.printables.com/de/model/</a></p><p>This version improves Mounting and Dsimountig, without the need to press the release button on the battery pack.</p> | [] | Hobby & Makers > Organizers | [
"834238/images/image_1_compressed.jpg",
"834238/images/image_2_compressed.jpg",
"834238/images/image_3_compressed.jpg"
] | [
"834238/stls/Bosch_18V_Holder.stl"
] | CC-BY | https://www.printables.com/model/834238 | data_0041.tar |
281408 | Bosch 5 inch Random Orbit Sander Wall Mount GEX12v-125 | <p>I can't mark it as a remix of a model from Thingiverse but this is a remix.</p><p>Designed to fit #8 wood screws.</p><p>Based on <a href="https://www.thingiverse.com/thing:5372438">https://www.thingiverse.com/thing:5372438</a> by hobbid, the model fits the sander perfectly but I was a little unhappy with how thin th... | [
"bosch",
"sander",
"tools",
"toolholder",
"orbitalsander",
"boschprofessional",
"bosch12v"
] | Hobby & Makers > Tools | [
"281408/images/image_1_compressed.jpg"
] | [
"281408/stls/gex_12v-125.stl"
] | CC-BY | https://www.printables.com/model/281408 | data_0041.tar |
63713 | Bosch AL3620CV Charger Brackets | <p>Simple brackets to hold a Bosch 36v charger on the wall. It is designed to use M4 or M4.5 flat head (countersunk type) screws.</p>
<p>Parts are designed to print without support or raft. You may have to rotate the parts individually to sit correctly on your print bed.</p>
<p>The battery also nicely fits on top when ... | [
"thingiverse",
"3620",
"al3620cv",
"bosch36v",
"boschal3620cv"
] | Household > Outdoor & Garden | [
"63713/images/image_1_compressed.jpg",
"63713/images/image_2_compressed.jpg",
"63713/images/image_3_compressed.jpg",
"63713/images/image_4_compressed.jpg"
] | [
"63713/stls/Lower_Bracket.stl",
"63713/stls/upper_bracket_REV1.stl"
] | CC-BY | https://www.printables.com/model/63713 | data_0041.tar |
76607 | Bosch BAT414/GBA12V30 12v Battery Wall Mount | <p>A wall mount for the BOSCH 12V Max BAT414/GBA12V30 battery <a href="(https://www.amazon.com/Bosch-12V-Lithium-Ion-Battery-GBA12V30/dp/B079NWHSCS">(https://www.amazon.com/Bosch-12V-Lithium-Ion-Battery-GBA12V30/dp/B079NWHSCS</a>).<br> <br>I've also designed a Slat Wall plate for this mount: <a href="https://www.p... | [
"wallmount",
"batteryholder",
"slatwall"
] | Hobby & Makers > Organizers | [
"76607/images/image_1_compressed.jpg",
"76607/images/image_2_compressed.jpg"
] | [
"76607/stls/Bosch 12v Battery Mount.stl"
] | CC-BY | https://www.printables.com/model/76607 | data_0041.tar |
473415 | Bosch box clip | <p>Box clip broke at the pin location where it rotates and others got lost. So created my own. They fit very nice and are strong.</p>
<p>For mounting its possible to use 4mm nail or M4 screws.</p>
<p>I put a little M4 screw from one side and inserted clip into its place then added another M4 screw from the side where y... | [
"box",
"case",
"handle",
"clip",
"drill",
"bosch",
"clips",
"thingiverse"
] | Gadgets > Other Gadgets | [
"473415/images/image_1_compressed.jpg",
"473415/images/image_2_compressed.jpg",
"473415/images/image_3_compressed.jpg",
"473415/images/image_4_compressed.jpg",
"473415/images/image_5_compressed.jpg",
"473415/images/image_6_compressed.jpg",
"473415/images/image_7_compressed.jpg",
"473415/images/image_8... | [
"473415/stls/Bosh_box_clip_v0.stl"
] | CC-BY | https://www.printables.com/model/473415 | data_0041.tar |
558725 | Bosch FSN screw clamp wall mount | Print with whatever u have.
Counter sink screws 4.5 mm head 8.5 mm | Download free 3D printable STL models | [
"bosch",
"screw",
"clamps",
"clampingtools",
"fsn"
] | Hobby & Makers > Tools | [
"558725/images/image_1_compressed.jpg"
] | [
"558725/stls/Bosch FSN screw clamp.stl"
] | CC0 | https://www.printables.com/model/558725 | data_0041.tar |
211517 | Bosch GSA 10,8 Holder | [] | Hobby & Makers > Tools | [
"211517/images/image_1_compressed.jpg",
"211517/images/image_2_compressed.jpg",
"211517/images/image_3_compressed.jpg"
] | [
"211517/stls/Bosch GSA.stl"
] | CC-BY | https://www.printables.com/model/211517 | data_0041.tar | |
979940 | Bosch GSR 12v-35 Wallmount | <p>A wallmount to hold your Bosch GSR 12v-15</p><p>you can print the modell without support (max 45° overhangs)</p><p>Printet with Red PETG from Extrudr</p> | [
"bosch",
"boschprofessional",
"bosch12v"
] | Hobby & Makers > Organizers | [
"979940/images/image_1_compressed.jpg",
"979940/images/image_2_compressed.jpg"
] | [] | CC-BY | https://www.printables.com/model/979940 | data_0041.tar |
979954 | Bosch GST 12V-70 Wallmount | <p>With this wall bracket, you can hang your cordless jigsaw on the wall<br>The model can be printed without support structures<br>Printed with red PETG from Ectrudr</p> | [
"bosch",
"boschprofessional",
"bosch12v"
] | Hobby & Makers > Organizers | [
"979954/images/image_1_compressed.jpg",
"979954/images/image_2_compressed.jpg"
] | [] | CC-BY | https://www.printables.com/model/979954 | data_0041.tar |
945872 | Bosch lower dishwasher rack wheel | [
"wheel",
"clip",
"replacement"
] | Household > Kitchen | [
"945872/images/image_1_compressed.jpg"
] | [
"945872/stls/Hjul.stl",
"945872/stls/Klips.stl"
] | CC0 | https://www.printables.com/model/945872 | data_0041.tar | |
357071 | Bosch PKP 18E glue gun holder for IKEA Skadis | <p>My wife needed a holder for her <strong>Bosch PKP 18E</strong> glue gun for <strong>IKEA Skadis</strong> pegboard. I took inspiration from <strong>Pontus</strong>, however designed from scratch.</p><p> </p><p>Redesigned it so it holds also 2 glue sticks (11 mm sized) as there was just a convenient spot for thos... | [
"organizer",
"holder",
"bosch",
"toolholder",
"gluegun",
"gluegunholder",
"gluestickholder",
"hotgluegun",
"boschpkp18e"
] | Hobby & Makers > Organizers | [
"357071/images/image_1_compressed.jpg",
"357071/images/image_2_compressed.jpg",
"357071/images/image_3_compressed.jpg",
"357071/images/image_4_compressed.jpg",
"357071/images/image_5_compressed.jpg"
] | [
"357071/stls/GlueGun_Holder.stl"
] | CC-BY | https://www.printables.com/model/357071 | data_0041.tar |
212169 | Bosch Professional GOP Dust Extractor / Vacuum Adapter |
<p>This is a simple part which allows you to connect a vacuum cleaner to your multitool when using the sanding pad. This part covers the holes of the pad and allows the vacuum cleaner to suck the dust in. I used it so far only to sand down a large cutting board in my kitchen and it worked great and way better than I... | [
"bosch",
"thingiverse",
"starlock",
"bosch12v",
"gop"
] | Hobby & Makers > Tools | [
"212169/images/image_1_compressed.jpg",
"212169/images/image_2_compressed.jpg",
"212169/images/image_3_compressed.jpg",
"212169/images/image_4_compressed.jpg",
"212169/images/image_5_compressed.jpg",
"212169/images/image_6_compressed.jpg",
"212169/images/image_7_compressed.jpg",
"212169/images/image_8... | [
"212169/stls/Lever_v21.stl",
"212169/stls/Suction_Adapter_v21.stl"
] | CC-BY | https://www.printables.com/model/212169 | data_0041.tar |
884134 | Bosch Truvo / PMD7 universal holder for Skadis | <p>While I liked the original model to hold my Bosch PMD7 - which is apparently also labeled Truvo sometimes - I'm really no fan of the T-Nuts used in the original model, because it requires additional hardware. Thus I prefer the Universal Skadis holder from CSD Salzburg and models using it, since all parts can be prin... | [
"bosch",
"universal",
"skadis",
"7",
"ikeaskadis",
"pmd",
"truvo",
"pmd7"
] | Hobby & Makers > Organizers | [
"884134/images/image_1_compressed.jpg",
"884134/images/image_2_compressed.jpg"
] | [
"884134/stls/Truvo_mk3_universal.stl"
] | CC-BY | https://www.printables.com/model/884134 | data_0041.tar |
548261 | Bosch-12V_Akku-tool-holder | Bosch-12V_Akku-tool-holder
- No Support | Download free 3D printable STL models | [
"wallmount",
"bosch",
"akku",
"12v",
"boschprofessional"
] | Hobby & Makers > Tools | [
"548261/images/image_1_compressed.jpg",
"548261/images/image_2_compressed.jpg"
] | [
"548261/stls/Bosch-12V_Akku-tool-holder.stl"
] | CC-BY | https://www.printables.com/model/548261 | data_0041.tar |
869965 | Boston Terrier - Low poly | <figure class="image image-style-align-center image_resized" style="width:75%;"><img src="https://media.printables.com/media/prints/869965/rich_content/1e0209c0-4b11-4249-86bd-1fb7864729eb/recurso-21.png#%7B%22uuid%22%3A%220f7ce9b7-d8a8-4012-9f20-fc68476a20f8%22%2C%22w%22%3A2867%2C%22h%22%3A307%7D"></figure><p><strong>... | [
"dogs",
"bostonterrier"
] | World & Scans > Animals | [
"869965/images/image_1_compressed.jpg",
"869965/images/image_2_compressed.jpg",
"869965/images/image_3_compressed.jpg"
] | [
"869965/stls/Base.stl",
"869965/stls/Boston Terrier.stl"
] | CC-BY | https://www.printables.com/model/869965 | data_0041.tar |
155014 | Bottle opener (10cm length) | <p>Basically, this is the same as https://www.thingiverse.com/thing:531991, but that one is only 7.5 cm (4 cm handle) and the remixed version is 10 cm (6.5 cm handle). It is easier to hold in hands and it has better lever to open stiff bottles. </p><p>The photo shows a thing made with red ABS, nozzle 0.6 layer 0.3... | [
"bottle",
"cap",
"bottlecap",
"bottleopener"
] | Household > Kitchen | [
"155014/images/image_1_compressed.jpg"
] | [
"155014/stls/bottle-oppener-10cm.stl"
] | CC0 | https://www.printables.com/model/155014 | data_0041.tar |
138063 | Bottle opener - 2 euro cent coin | <p>Let me introduce a model of my frequently used opener. Although you can see the openers with my old logo in the pictures, you will find a plain model in the files, without a logo. You can import your own sign using Add negative volume in slicer.</p><p>It is fun to compose the color sequence in slicer, but the more c... | [
"kitchen",
"opener",
"bottle",
"color",
"coin",
"bottleopener",
"kitchentool",
"comfortable",
"2cent"
] | Household > Kitchen | [
"138063/images/image_1_compressed.jpg",
"138063/images/image_2_compressed.jpg",
"138063/images/image_3_compressed.jpg",
"138063/images/image_4_compressed.jpg",
"138063/images/image_5_compressed.jpg",
"138063/images/image_6_compressed.jpg"
] | [
"138063/stls/opener_2cent.stl",
"138063/stls/opener_2cent_5changes.stl",
"138063/stls/opener_2cent_no_change.stl"
] | CC-BY | https://www.printables.com/model/138063 | data_0041.tar |
9197 | Bottle Shutter / Bottle cap 01 | <p>Summertime also means bees, flies and beetles. And no one wants to have them in his bottle.(Tested with EU bottles)</p>
<p>3d printing to the rescue.</p>
<h3>Print instructions</h3><h3>Category: Household Print Settings</h3>
<p><strong>Printer Brand:</strong> Prusa</p>
<p><strong>Printer:</strong> <a href="http://am... | [
"bottle",
"lid",
"diy",
"cap",
"fusion360",
"practical",
"bottlecap",
"thingiverse",
"autodeskfusion360",
"practicalhousehold",
"bootlecap",
"practical3dprinters"
] | Household > Kitchen | [
"9197/images/image_1_compressed.jpg",
"9197/images/image_2_compressed.jpg",
"9197/images/image_3_compressed.jpg",
"9197/images/image_4_compressed.jpg",
"9197/images/image_5_compressed.jpg",
"9197/images/image_6_compressed.jpg"
] | [
"9197/stls/bottleshutter01-body1.stl"
] | CC-BY | https://www.printables.com/model/9197 | data_0041.tar |
489104 | Bottom extension for the “MMU2S Buffer (inspired by RMU Buffer)” | <p>While printing with my matte filaments (not as smooth/elastic as the normal ones), there seems a small chance an excess loop of filament would strangle another at the bottom open. So I made this part to prevent such loops from touching each other.</p><p>It should be mounted upon the bottom section of the buffer (as ... | [
"mmu2sbuffer"
] | 3D Printers > Prusa Parts & Upgrades | [
"489104/images/image_1_compressed.jpg"
] | [
"489104/stls/BottomExtension.stl",
"489104/stls/BottomExtension2.stl"
] | GPL2.0 | https://www.printables.com/model/489104 | data_0041.tar |
811544 | Bottone a forma di stella | <p>Bottone a fora di stella.</p><p>dimensioni 15mm x 15mm x 3mm</p><p>Quando si fa lo slicer mettere la stiratura dell'ultimo layer così da ottenere una superfice liscia.</p> | [
"cucito",
"bottoni"
] | Fashion > Other Fashion Accessories | [
"811544/images/image_1_compressed.jpg"
] | [
"811544/stls/Bottone a forma di stella.stl"
] | CC-BY | https://www.printables.com/model/811544 | data_0041.tar |
1036868 | Bow Hanger | [
"hook",
"hanger",
"bow",
"tree",
"molle",
"webbing",
"hunting",
"compound",
"sys",
"saddlehunting"
] | Sports & Outdoor > Outdoor Sports | [
"1036868/images/image_1_compressed.jpg"
] | [
"1036868/stls/bow Hook.stl"
] | CC0 | https://www.printables.com/model/1036868 | data_0041.tar | |
183565 | Bowden PTFE tube clamp for BMG (clone) extruder |
<p>After a while got tired with PTFE tube sliding up and down despite using few clamping “aids” so, here is my design for clone BMG extruder.</p>
<p>I’m using Sapphire PRO so had no trouble placing new clamp, obviously it can be used on any clone BMG’s with sufficient printer space to accommodate the addition.</p>
<... | [
"thingiverse"
] | 3D Printers > Other Printer Parts & Upgrades | [
"183565/images/image_1_compressed.jpg",
"183565/images/image_2_compressed.jpg",
"183565/images/image_3_compressed.jpg",
"183565/images/image_4_compressed.jpg",
"183565/images/image_5_compressed.jpg",
"183565/images/image_6_compressed.jpg"
] | [
"183565/stls/base.stl",
"183565/stls/cap.stl",
"183565/stls/insert.stl"
] | CC-BY | https://www.printables.com/model/183565 | data_0041.tar |
521608 | Bowden tube cap | Bowden tube cap.
Openscad file to customize model. | Download free 3D printable STL models | [
"bowdentube",
"bowden"
] | 3D Printers > Accessories | [
"521608/images/image_1_compressed.jpg"
] | [
"521608/stls/boden-tube-cap.stl"
] | CC-BY | https://www.printables.com/model/521608 | data_0041.tar |
1361023 | Bowden tube disconnect tool for 4mm and 6mm tubes upgrade | <p> UPGRADE</p><p>Sometimes it could be hard to grip the shaft on the disconnector.</p><p>So here is one with a handle..... Ta da!</p><p>also with a hole so you can hang it up and f... | [] | 3D Printers > Prusa Parts & Upgrades | [
"1361023/images/image_1_compressed.jpg",
"1361023/images/image_2_compressed.jpg",
"1361023/images/image_3_compressed.jpg",
"1361023/images/image_4_compressed.jpg",
"1361023/images/image_5_compressed.jpg",
"1361023/images/image_6_compressed.jpg",
"1361023/images/image_7_compressed.jpg",
"1361023/images... | [
"1361023/stls/4.2 upgrade with hole.stl",
"1361023/stls/4.2 upgrade.stl",
"1361023/stls/4.2mm Bowden tube disconnect tool(1).stl",
"1361023/stls/6.3 upgrade with hole.stl",
"1361023/stls/6.3 upgrade.stl",
"1361023/stls/6.3mm bowden disconnect.stl",
"1361023/stls/just the 4mm head for tiny spaces.stl"
] | CC0 | https://www.printables.com/model/1361023 | data_0041.tar |
269478 | Bowden Tube Filament Guide for Ender 3 | <p>Guides your filament to the extruder using a piece of PTFE bowden tube. This version doesn't need the adapter, but just holds the tube press-fit.</p><p>For best results, use TPU. It'll hold the tube snugly, and flex to get just the right angle between your extruder and spool location. </p> | [
"filament",
"guide",
"filamentguide",
"ender3",
"ender3pro"
] | 3D Printers > Creality Parts & Upgrades | [
"269478/images/image_1_compressed.jpg"
] | [
"269478/stls/bowden guide.stl"
] | CC0 | https://www.printables.com/model/269478 | data_0041.tar |
182316 | Bowden/Capricorn Tube Cutter |
<p>Simple cutter for Bowden or Capricorn tubing for 1.75mm filament. Uses standard single edge razor blade.</p>
<h3>Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Creality</p>
<p class="detail-setting printer"><strong>Printer: </strong>
<div><p>Ender 3</p></div>
<p><strong>Rafts:</strong></p>
<p>No</p... | [
"bowden",
"thingiverse"
] | Hobby & Makers > Other Ideas | [
"182316/images/image_1_compressed.jpg",
"182316/images/image_2_compressed.jpg",
"182316/images/image_3_compressed.jpg"
] | [
"182316/stls/Capricorn_Tube_Cutter_v1.stl",
"182316/stls/Tube_Cutter_v6.stl"
] | CC-BY | https://www.printables.com/model/182316 | data_0041.tar |
165796 | bowl of 9 skullfaces for halloween |
<p>This is a candy bowl for halloween. I don't have mad cad skillz, but I did my best. Something happened to one face during process, but it doesn't effect use. The nose hole is kind of broken, I tried to smooth it a bit.</p>
<p>I used <a href="https://www.thingiverse.com/thing:460222">https://www.thingiverse.com/th... | [
"halloween",
"bowl",
"thingiverse"
] | Household > Other House Equipment | [
"165796/images/image_1_compressed.jpg"
] | [
"165796/stls/9skullbowl.stl"
] | CC-BY | https://www.printables.com/model/165796 | data_0041.tar |
256195 | bowl with rotating ring | <h3>TL;DR</h3><p>Very esthetic spheric bowl with a print in place rotating outer ring.</p><p> </p><h3>rotating rings</h3><p>I'm fascinated by print in place rotating ring stuff. <br>From finger <a href="https://www.printables.com/model/272994-one-ring-not-to-rule-but-to-roll">rings</a> to fidget spinners over... | [
"spinner",
"spin",
"ring",
"rings",
"rotating",
"bowl",
"spinning",
"research",
"spheric"
] | Household > Home Decor | [
"256195/images/image_1_compressed.jpg",
"256195/images/image_2_compressed.jpg",
"256195/images/image_3_compressed.jpg",
"256195/images/image_4_compressed.jpg",
"256195/images/image_5_compressed.jpg"
] | [
"256195/stls/RotaryRingBowl-220808-0808-Bowl 12.stl"
] | GPL3.0 | https://www.printables.com/model/256195 | data_0041.tar |
1042078 | Bowling game | <p>Bowling diseñado 100% desde cero.</p><p>Contiene:<br>-Base<br>-Bolos<br>-Lanzador<br>-Pelota</p><p>La base esta dividida en 2 para que se puede imprimir por separado. La unión es mediante encastre.</p> | [
"ball",
"bowling",
"mesa",
"juego",
"juegos",
"bolos",
"encastre"
] | Toys & Games > Other Toys & Games | [
"1042078/images/image_1_compressed.jpg",
"1042078/images/image_2_compressed.jpg",
"1042078/images/image_3_compressed.jpg",
"1042078/images/image_4_compressed.jpg"
] | [
"1042078/stls/Base parte 1.stl",
"1042078/stls/Base parte 2.stl",
"1042078/stls/Bolo.stl",
"1042078/stls/Lanzador.stl",
"1042078/stls/Pelota.stl"
] | CC0 | https://www.printables.com/model/1042078 | data_0041.tar |
16208 | Bowling trophy multicolor | <p>I mostly just separated the shells in the original file into parts, then extracted the rings on the pin.</p>
<p>You should be able to print all 4 colors on any dual-color-capable printer by switching one of the colors when inactive because thanks to the original design at any moment at most two colors are needed.</p... | [
"mmu",
"multicolor",
"prize",
"thingiverse",
"dualextrusion",
"bowling",
"bowlingballcup",
"bowlingpin"
] | Sports & Outdoor > Indoor Sports | [
"16208/images/image_1_compressed.jpg",
"16208/images/image_2_compressed.jpg",
"16208/images/image_3_compressed.jpg",
"16208/images/image_4_compressed.jpg",
"16208/images/image_5_compressed.jpg"
] | [
"16208/stls/ball.stl",
"16208/stls/pin.stl",
"16208/stls/pin_rings.stl",
"16208/stls/stand.stl"
] | CC-BY | https://www.printables.com/model/16208 | data_0041.tar |
50852 | Bowls for the Toy Kitchen [no supports] | <p>I made these bowls for my kids to use in their toy kitchen. They are a simple design with no need for supports.</p>
<p>I had some issues along the perimeter of the bowl halfway up. I discovered that my slicer had sliced a couple of layers with loads of small loops instead of continuous one. I fiddled with the extrus... | [
"bowl",
"thingiverse"
] | Toys & Games > Other Toys & Games | [
"50852/images/image_1_compressed.jpg",
"50852/images/image_2_compressed.jpg"
] | [
"50852/stls/bowl.stl"
] | CC-BY | https://www.printables.com/model/50852 | data_0041.tar |
73498 | bowser box | <p>caja bowser mario bros, forma parte de una colección sobre cajas de Mario no olvides visitar mi perfil, también decir que las tapas a partir de 2mm puedes cambiar el color igual que hice yo saludos<br> </p><p><strong>CUB SOCIOS:</strong><br><a href="https://www.printables.com/@tecnoculebras#join:484">https://ww... | [
"box",
"mario",
"bros",
"supermario",
"supermariobros",
"bowser",
"mariobros"
] | Household > Home Decor | [
"73498/images/image_1_compressed.jpg",
"73498/images/image_2_compressed.jpg"
] | [
"73498/stls/Body.stl",
"73498/stls/Lid.stl"
] | CC0 | https://www.printables.com/model/73498 | data_0041.tar |
61260 | BowTie Pulleybox / Gearbox | <p>Improve the extrusion accuracy of your direct-drive printhead while making it significantly lighter too.</p><p>This is a spin on my "BowTie"-gearbox, but made to use a belt drive this time. It features a <i>very</i> <i>slightly</i> bigger gear ratio - but it's main advantage is that the printed spur-gear from that d... | [
"extruder",
"bowtie",
"belt",
"geared",
"gearbox",
"pulleybox"
] | 3D Printers > Other Printer Parts & Upgrades | [
"61260/images/image_1_compressed.jpg",
"61260/images/image_2_compressed.jpg",
"61260/images/image_3_compressed.jpg",
"61260/images/image_4_compressed.jpg"
] | [
"61260/stls/BowTieBeltBody.stl",
"61260/stls/GT2 Timing Pulley v2 38t.stl"
] | GPL3.0 | https://www.printables.com/model/61260 | data_0041.tar |
1192442 | Box for 6 Nextruder nozzles with magnet to hang it on a metal surface (with Freecad file) | <p>Printed with a 0.4mm nozzle with a layer height of 0.2 in PETG (its flexibility is better to fit the nozzles without breaking the sockets).</p><p>Once printed, you have to move the different fins to improve movements.</p><p>The file in Freecad format is added in case you want to modify the model.</p><p> </p><p>... | [
"prusa",
"nozzles",
"one",
"core",
"mk4",
"nextruder",
"mk4s",
"boquillas"
] | 3D Printers > Prusa Parts & Upgrades | [
"1192442/images/image_1_compressed.jpg",
"1192442/images/image_2_compressed.jpg",
"1192442/images/image_3_compressed.jpg"
] | [
"1192442/stls/cajaNextruder_v2-label.stl",
"1192442/stls/cajaNextruder_v2-label025.stl",
"1192442/stls/cajaNextruder_v2-label040.stl",
"1192442/stls/cajaNextruder_v2-label060.stl",
"1192442/stls/cajaNextruder_v2-label080.stl",
"1192442/stls/cajaNextruder_v2-label1.stl",
"1192442/stls/cajaNextruder_v2-to... | CC-BY | https://www.printables.com/model/1192442 | data_0041.tar |
1386472 | Box for Crayons and Pencils | <p>No more scattered pencils! This practical and stylish box is designed to safely store up to <strong>24 colored pencils or pens</strong> with a length of approximately <strong>175 mm</strong> and a diameter of up to <strong>8 mm</strong>. Perfect for students, artists, and creative souls.</p><h3>📐 Model Parameters</... | [
"box",
"organizer",
"art",
"school",
"storage",
"pencils",
"crayons"
] | Household > Office | [
"1386472/images/image_1_compressed.jpg",
"1386472/images/image_10_compressed.jpg",
"1386472/images/image_11_compressed.jpg",
"1386472/images/image_12_compressed.jpg",
"1386472/images/image_13_compressed.jpg",
"1386472/images/image_2_compressed.jpg",
"1386472/images/image_3_compressed.jpg",
"1386472/im... | [
"1386472/stls/Box.stl",
"1386472/stls/Holder.stl",
"1386472/stls/Lid Flowers A.stl",
"1386472/stls/Lid Flowers B.stl",
"1386472/stls/Lid.stl",
"1386472/stls/PS Box for crayons or pencils (flower).stl",
"1386472/stls/PS Box for crayons or pencils.stl"
] | CC-BY | https://www.printables.com/model/1386472 | data_0041.tar |
8589 | Box for deck of 36 Playing Cards | <p>Box for a deck of 36 playing cards with french symbols embossed on the lid</p>
<p>Can be used for cards of dimension 57x89mm</p>
<h3>Print instructions</h3><h3>Category: Toys & Games Print Settings</h3>
<p><strong>Printer Brand:</strong> Prusa</p>
<p><strong>Printer:</strong> <a href="http://amzn.to/2DxjZlB">i3 ... | [
"cards",
"thingiverse",
"jass",
"playingcards"
] | Toys & Games > Other Toys & Games | [
"8589/images/image_1_compressed.jpg",
"8589/images/image_2_compressed.jpg",
"8589/images/image_3_compressed.jpg",
"8589/images/image_4_compressed.jpg",
"8589/images/image_5_compressed.jpg"
] | [
"8589/stls/base.stl",
"8589/stls/lid.stl"
] | CC-BY | https://www.printables.com/model/8589 | data_0041.tar |
872635 | Box for Geely Atlas Pro remix | <p>Bot for car Geely Atlas Pro 2021-…</p> | [
"box",
"car",
"atlas",
"geely"
] | Hobby & Makers > Automotive | [
"872635/images/image_1_compressed.jpg",
"872635/images/image_2_compressed.jpg",
"872635/images/image_3_compressed.jpg"
] | [
"872635/stls/atlas_box_v5_v2_1.stl",
"872635/stls/atlas_box_v5_v2_1.stl_1.stl"
] | CC-BY | https://www.printables.com/model/872635 | data_0041.tar |
312630 | Box for RJ45 crimping tool. | <p>Used 2 m3x40 screws.</p><p>printed with:</p><p> 0.6mm nozzle.</p><p>0.3mm layer height.</p><p>4top/bottom layers.</p><p>Esun ESilk Pla. </p> | [
"storagebox",
"rj45",
"crimpingtool",
"rj12"
] | Hobby & Makers > Electronics | [
"312630/images/image_1_compressed.jpg",
"312630/images/image_2_compressed.jpg",
"312630/images/image_3_compressed.jpg"
] | [
"312630/stls/RJ45 bottom side.stl",
"312630/stls/RJ45 Top side.stl"
] | CC0 | https://www.printables.com/model/312630 | data_0041.tar |
73148 | Box in the shape of a barrel | <p>🔵 Box in the shape of a barrel 🔵<br>➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖<br>Follow me on YouTube for more info about what you can look forward for.</p><p>■ YouTube<br>➔ https://www.youtube.com/channel/UCn-fQH2--PRf4VltMLOjYcw</p><p>■ Video<br>🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹</p><figure class... | [] | Household > Office | [
"73148/images/image_1_compressed.jpg",
"73148/images/image_2_compressed.jpg",
"73148/images/image_3_compressed.jpg",
"73148/images/image_4_compressed.jpg",
"73148/images/image_5_compressed.jpg",
"73148/images/image_6_compressed.jpg",
"73148/images/image_7_compressed.jpg"
] | [
"73148/stls/green - (barrel) by - MrHanjak 2021.stl",
"73148/stls/neutral color - (cover barrel) by - MrHanjak 2021.stl",
"73148/stls/red - (barrel) by - MrHanjak 2021.stl",
"73148/stls/yellow - (barrel) by - MrHanjak 2021.stl"
] | CC-BY | https://www.printables.com/model/73148 | data_0041.tar |
47885 | box jellyfish 3D Printer enclosure IKEA LACK table | <p>Add Nov 2021 </p><ul><li>slider to lift the roof plate when closing the door</li></ul><p> </p><p>Fits perfect to an IKEA LACK table with 55x55cm Or you us a 550x550mm wood plate.</p><p>no disturbing table feet's you have full view access to your printer.</p><p><br>It is designed for easy PC sheet cutting. ... | [
"enclosure",
"ikeahack",
"ikealack",
"3dprinter",
"anycubic",
"thingiverse",
"3dprinterenclosure",
"anycubici3mega"
] | 3D Printers > Other Printer Parts & Upgrades | [
"47885/images/image_1_compressed.jpg",
"47885/images/image_2_compressed.jpg",
"47885/images/image_3_compressed.jpg",
"47885/images/image_4_compressed.jpg",
"47885/images/image_5_compressed.jpg",
"47885/images/image_6_compressed.jpg",
"47885/images/image_7_compressed.jpg",
"47885/images/image_8_compres... | [
"47885/stls/1xclamp3.stl",
"47885/stls/1xclamp4.stl",
"47885/stls/1xhandle2.stl",
"47885/stls/3xhinge.stl",
"47885/stls/3xhinge1.stl",
"47885/stls/3xpin.stl",
"47885/stls/3xsidetop.stl",
"47885/stls/4xbottomcorner.stl",
"47885/stls/4xtopcorner.stl",
"47885/stls/5xside.stl",
"47885/stls/DoorSlide... | CC-BY | https://www.printables.com/model/47885 | data_0041.tar |
1551516 | BOX OPENER/cutter (for cardboard boxes) | [
"opener",
"box",
"tool",
"cutter"
] | Hobby & Makers > Tools | [
"1551516/images/image_1_compressed.jpg",
"1551516/images/image_2_compressed.jpg",
"1551516/images/image_3_compressed.jpg"
] | [
"1551516/stls/box opener.stl"
] | CC-BY | https://www.printables.com/model/1551516 | data_0041.tar | |
814386 | Box Organizer for Sewing Thread/Spools | <p>Holds up to fifteen spools of thread. Each spool container measures 40mm x 60mm x 50mm. Use either a piece of 1.75mm filament or a <a href="https://www.amazon.com/Printer-Extruder-Filament-Declogging-Cleaning/dp/B09TN67NKW">1.75mm rod</a> as the pin for the hinge.<br><br>Box top has two versions: with or without a t... | [
"holder",
"thread",
"sewing",
"stitching",
"nosupport",
"nosupportneeded"
] | Hobby & Makers > Organizers | [
"814386/images/image_1_compressed.jpg",
"814386/images/image_2_compressed.jpg",
"814386/images/image_3_compressed.jpg",
"814386/images/image_4_compressed.jpg",
"814386/images/image_5_compressed.jpg"
] | [
"814386/stls/Box-Bottom.stl",
"814386/stls/Box-Top-No-Icon.stl",
"814386/stls/Box-Top-With-Icon.stl"
] | CC-BY | https://www.printables.com/model/814386 | data_0041.tar |
516294 | Box with lid | <p>Simple box with lid.</p> | [] | Hobby & Makers > Organizers | [
"516294/images/image_1_compressed.jpg"
] | [
"516294/stls/box.stl",
"516294/stls/lid.stl"
] | CC0 | https://www.printables.com/model/516294 | data_0041.tar |
49924 | Box with lid held by latches | <p>A plain lidded box with rounded corners. The lid holds on latches.</p>
<p>Download .scad, set dimensions and wall width as you like.<br/>
If you change the wall width, consider tuning the latch.</p>
<h3>Print instructions</h3><p><strong>Notes:</strong><br/>
The .scad file has a parameter called <em>clearence</em> (m... | [
"box",
"container",
"thingiverse"
] | Hobby & Makers > Organizers | [
"49924/images/image_1_compressed.jpg",
"49924/images/image_2_compressed.jpg",
"49924/images/image_3_compressed.jpg"
] | [
"49924/stls/inner_50x30x20_wall12.stl",
"49924/stls/outer_60x30x20_wall12.stl"
] | CC-BY | https://www.printables.com/model/49924 | data_0041.tar |
821872 | Brace for Kirigami Bed Voron V0.2 | <p>Hi there!</p><p>When printing with higher acceleration values on the V0.2 the bed will swing up and down. To fix this I designed this brace that will stiffen up the kirigami bed carrier. </p><p>In addition for a simple mount you should also reprint the slightly modified stealth nut block.</p><p>The brace itself... | [
"brace",
"acceleration",
"stiff",
"kirgami"
] | 3D Printers > Voron Parts & Upgrades | [
"821872/images/image_1_compressed.jpg",
"821872/images/image_2_compressed.jpg",
"821872/images/image_3_compressed.jpg",
"821872/images/image_4_compressed.jpg"
] | [
"821872/stls/kirigami_brace.stl",
"821872/stls/VORON_v0.2_stealth_nut_block_MOD.stl"
] | GPL3.0 | https://www.printables.com/model/821872 | data_0041.tar |
1403233 | Bracelet holder (small printer friendly) | <h4>Description</h4><p>This accessory holder consists of four separately printed parts, optimized for the Prusa MINI+ build plate (or any plate of equal or larger size). The base comes in two heights: 128 mm and 158 mm. The smaller one can be placed in front of the taller one so both sets of bracelets remain visible.</... | [
"fashion",
"accessory",
"home",
"practicalprint"
] | Household > Bedroom | [
"1403233/images/image_1_compressed.jpg",
"1403233/images/image_2_compressed.jpg",
"1403233/images/image_3_compressed.jpg"
] | [
"1403233/stls/Base (128mm).stl",
"1403233/stls/Base (158mm).stl",
"1403233/stls/Base V2 128mm.stl",
"1403233/stls/Base V2 158mm.stl",
"1403233/stls/End cap V2 0.2mm clearance 0.3mm fillet.stl",
"1403233/stls/End cap.stl",
"1403233/stls/Shaft and 2 end caps.stl",
"1403233/stls/Shaft.stl"
] | CC-BY | https://www.printables.com/model/1403233 | data_0041.tar |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.