model_id stringlengths 1 7 | name stringlengths 2 210 | description stringlengths 0 253k | tags listlengths 0 494 | printables_category stringclasses 80
values | image_paths listlengths 0 289 | stl_paths listlengths 0 2.73k | license stringclasses 7
values | source stringlengths 34 40 | shard_file stringclasses 49
values |
|---|---|---|---|---|---|---|---|---|---|
415888 | Hose Clip for Dishwasher Hoses | <p>small clip I designed for organizing the hoses of my dishwasher in my cabinet - diameter 23mm</p><p>kleiner Clip den ich designed habe um die Schläuche der Spülmaschine im Küchenschrank etwas zu ordnen - Durchmesser 23mm</p> | [
"kitchen",
"clip",
"dishwasher",
"halter",
"schlauch",
"hoseclip"
] | Household > Kitchen | [
"415888/images/image_1_compressed.jpg"
] | [
"415888/stls/Halter_Schlauch_Spuelmaschine.stl"
] | CC-BY | https://www.printables.com/model/415888 | data_0044.tar |
51309 | Hose holder | <p>Hose holder that keeps the hose securely where you need it (aquarium, bath, etc.). This holder works reliably for hoses up to 18 mm in diameter, but you can customize the included model (Fusion 360) to suit your needs.</p>
<h3>Print instructions</h3><p>I recommend PETG due to higher toughness. I printed vertically w... | [
"aquarium",
"hose",
"gardenhose",
"washingmachine",
"hoseadapter"
] | Household > Other House Equipment | [
"51309/images/image_1_compressed.jpg",
"51309/images/image_2_compressed.jpg",
"51309/images/image_3_compressed.jpg",
"51309/images/image_4_compressed.jpg"
] | [
"51309/stls/hose_holder.stl"
] | CC0 | https://www.printables.com/model/51309 | data_0044.tar |
244699 | Hot Shoe cover with hidden SD card storage | <p><strong>Background:</strong></p><p>I don't know about you, but I never use the hot shoe mount on my DSLR (I even had to google what it was called), so I was inspired to make use of it. A Micro SD card fits absolutely perfectly into the normally empty space, so there's no reason to not keep some spare, backup storage... | [
"camera",
"holder",
"storage",
"sdcard",
"microsd",
"photography",
"nikon",
"canon",
"dslr",
"sony",
"microsdcardholder",
"videography",
"photos"
] | Gadgets > Photo & Video | [
"244699/images/image_1_compressed.jpg",
"244699/images/image_2_compressed.jpg",
"244699/images/image_3_compressed.jpg",
"244699/images/image_4_compressed.jpg",
"244699/images/image_5_compressed.jpg",
"244699/images/image_6_compressed.jpg"
] | [
"244699/stls/DSLR_HOT_SHOE_GENERIC-CANON.stl",
"244699/stls/DSLR_HOT_SHOE_SONY.stl"
] | CC-BY | https://www.printables.com/model/244699 | data_0044.tar |
334012 | Hot Wheels Christmas Ornament | <p>I wanted some ornaments with some of my Hot Wheels on them so I made this. It just glues together, then I used wire bread ties with the paper removed to go thru the holes and around the wheels to hold the car on. I added a track piece that you can glue on before you attach the car. </p> | [
"hot",
"christmasornament",
"matchbox",
"hotwheels"
] | Seasonal designs > Winter & Christmas & New Year's | [
"334012/images/image_1_compressed.jpg",
"334012/images/image_2_compressed.jpg"
] | [
"334012/stls/hot wheels christmas bauble track addon.stl",
"334012/stls/hot wheels christmas bauble.stl"
] | CC0 | https://www.printables.com/model/334012 | data_0044.tar |
580871 | Hot Wheels Track Connector | <p>Basic track connector for hot wheels track </p> | [
"toys",
"kids",
"wheels",
"track",
"cars",
"hotwheels"
] | Toys & Games > Building Toys | [
"580871/images/image_1_compressed.jpg"
] | [
"580871/stls/PartHW.stl"
] | CC-BY | https://www.printables.com/model/580871 | data_0044.tar |
204011 | Hotbed Strain Relief for Ender 5 Plus | <p>This is a remix/redesign of BGDog's Ender 5 Plus hot bed strain relief as posted over on Thingiverse. It doesn't seem to be here, so I have not marked it as a remix, but it is. You can find the original design here:</p><p><a href="https://www.thingiverse.com/thing:4067316">https://www.thingiverse.com/thi... | [
"cable",
"hotbed"
] | 3D Printers > Creality Parts & Upgrades | [
"204011/images/image_1_compressed.jpg"
] | [
"204011/stls/Hot Bed Strain Relief Ender 5 Plus.stl"
] | CC-BY | https://www.printables.com/model/204011 | data_0044.tar |
261663 | Hotend Fan Silencer For Ender 3 pro |
<p>updated version</p>
<h3>Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Creality</p>
<p class="detail-setting printer"><strong>Printer: </strong>
<div><p>Ender 3 Pro</p></div>
<p><strong>Rafts:</strong></p>
<p>No</p>
<p class="detail-setting supports"><strong>Supports: </strong>
<div><p>Yes</p></div... | [
"ender3",
"thingiverse",
"ender3pro"
] | 3D Printers > Creality Parts & Upgrades | [
"261663/images/image_1_compressed.jpg"
] | [
"261663/stls/silencer.stl"
] | CC-BY | https://www.printables.com/model/261663 | data_0044.tar |
317422 | Hotend Holder for Prusa I3 MK3S+ | <h3>WARNING ! Designed for Prusa MK3S+. I didn't made tests on other printers !!!</h3><p> </p><h3>ENGLISH (French below)</h3><p>After breaking 2 hotend heater when changing the nozzle of my printer, I designed this tool to hold my hotend while I loosen it. Thanks to it, I'm not breaking the cables of my hotend hea... | [
"tool",
"hotend",
"mk3s",
"prusai3mk3s",
"3dprintertool"
] | 3D Printers > Accessories | [
"317422/images/image_1_compressed.jpg",
"317422/images/image_2_compressed.jpg",
"317422/images/image_3_compressed.jpg"
] | [
"317422/stls/Hotend Holder.stl"
] | CC0 | https://www.printables.com/model/317422 | data_0044.tar |
162645 | Hotends Seam Test | <p>Model used to test different slicer settings relating to Vertical Seams, Z Seam etc. </p> | [] | 3D Printers > Test Models | [
"162645/images/image_1_compressed.jpg"
] | [
"162645/stls/Hotends-Seam-Test-Hollow.stl",
"162645/stls/Hotends-Seam-Test.stl"
] | CC-BY | https://www.printables.com/model/162645 | data_0044.tar |
1188488 | Hoth (Star Wars) Echo Base HueForge Print with Tauntauns | <p>You don't need a multicolor printer to print a hueforge, follow the directions below.<br><br>Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm<br>Add pauses in your slicer at the layers below and swap colors: <br><br>Swap Instructions:<br>Start with Black<br>At layer #8 (0.72mm) swa... | [
"starwars",
"color",
"hoth",
"hueforge"
] | Art & Design > 2D Plates & Logos | [
"1188488/images/image_1_compressed.jpg",
"1188488/images/image_2_compressed.jpg"
] | [
"1188488/stls/hothh_Front_133x200.stl"
] | CC0 | https://www.printables.com/model/1188488 | data_0044.tar |
539262 | HOTO Electric Screwdriver 3.6V Cordless Skadis Wall | <p>HOTO Electric Screwdriver 3.6V Cordless Skadis Wall</p><p>Printed in PLA+ on Ender 3 Pro</p><p>I've both a tight version and one with a bit of looser (recommended)</p> | [
"wall",
"screwdriver",
"skadis",
"hoto"
] | Hobby & Makers > Organizers | [
"539262/images/image_1_compressed.jpg",
"539262/images/image_2_compressed.jpg",
"539262/images/image_3_compressed.jpg"
] | [
"539262/stls/Skadis Hoto Screwdriver Loose.stl",
"539262/stls/Skadis Hoto Screwdriver.stl"
] | CC-BY | https://www.printables.com/model/539262 | data_0044.tar |
460329 | Hoto Electric Screwdriver Rugged Case (41 bits) | <p>I purchased an electric screw driver from Hoto that came in an aluminium cylinder. The driver itself is fantastic, but the cylinder took up a lot of space and didn't stay closed. The bit selection was also rather poor.</p><p> </p><p>I decided to make a new box that can fit more bits & would stay closed.</p>... | [
"ruggedcase",
"rugged",
"hoto",
"hototools"
] | Hobby & Makers > Tools | [
"460329/images/image_1_compressed.jpg",
"460329/images/image_2_compressed.jpg",
"460329/images/image_3_compressed.jpg",
"460329/images/image_4_compressed.jpg"
] | [
"460329/stls/Hoto Driver 40 Bits.stl"
] | CC0 | https://www.printables.com/model/460329 | data_0044.tar |
1632299 | Hotswap Disk Sled for Crappy Rosewill RSV Series Server Cases | <p>Did you also make the mistake of buying a Rosewill RSV-4412 server case or RSV-SATA-Cage-34 panel-mount case? If so, did you realize Rosewill doesn't sell spare disk caddies? If not, did you notice how flimsy the sleds are, and how breakable that little catch point hole looks? If not, is your return window still ope... | [
"server",
"nas",
"hotswap"
] | Gadgets > Computers | [
"1632299/images/image_1_compressed.jpg",
"1632299/images/image_2_compressed.jpg",
"1632299/images/image_3_compressed.jpg",
"1632299/images/image_4_compressed.jpg",
"1632299/images/image_5_compressed.jpg",
"1632299/images/image_6_compressed.jpg"
] | [
"1632299/stls/Caddy for RSV-4000 - All Parts.stl"
] | CC0 | https://www.printables.com/model/1632299 | data_0044.tar |
247710 | House Number - 9 | <p>Printed on a Mini+ using generic black PETG and it came out great. Printed on a textured sheet and came out very nice.</p> | [
"house",
"numbers",
"address",
"housenumbers",
"homeaddress"
] | Household > Outdoor & Garden | [
"247710/images/image_1_compressed.jpg"
] | [
"247710/stls/HouseNumber-9.stl"
] | CC0 | https://www.printables.com/model/247710 | data_0044.tar |
413643 | House numbers | <p>Depth of each number is 20mm, groove is 2mm deep, so there is possible color change as in my case. Designed for attachment with woodscrew.<br>Printable without supports.<br><br><i>*Uploaded PDF with highlighted holes as template for easier drilling. Line with length 175mm is for print in right scale.</i>*</p> | [
"house",
"numbers",
"housenumbers",
"adress"
] | Household > Other House Equipment | [
"413643/images/image_1_compressed.jpg",
"413643/images/image_2_compressed.jpg",
"413643/images/image_3_compressed.jpg",
"413643/images/image_4_compressed.jpg",
"413643/images/image_5_compressed.jpg"
] | [
"413643/stls/0.stl",
"413643/stls/1.stl",
"413643/stls/2.stl",
"413643/stls/3.stl",
"413643/stls/4.stl",
"413643/stls/5.stl",
"413643/stls/6.stl",
"413643/stls/7.stl",
"413643/stls/8.stl",
"413643/stls/9.stl"
] | CC0 | https://www.printables.com/model/413643 | data_0044.tar |
876710 | Housenumber with drilling template - Hausnummer mit Bohrschablone | <p>Update 2026-06-21: Added capital B and longer holder elements.</p><p>Update 2024-12-02: Ziffer 2 und A korrigiert.</p><p></p><p><strong>Please note: The images are sample images, as the principles apply equally to all numbers and symbols!</strong></p><p>The following symbols are available:</p><p>0, 1, 2, 3, 4, 5, 6,... | [
"numbers",
"number",
"zahl",
"zahlen",
"housenumbers",
"nummern",
"hausnummer",
"nummer",
"ziffer"
] | Household > Other House Equipment | [
"876710/images/image_1_compressed.jpg",
"876710/images/image_10_compressed.jpg",
"876710/images/image_11_compressed.jpg",
"876710/images/image_12_compressed.jpg",
"876710/images/image_13_compressed.jpg",
"876710/images/image_14_compressed.jpg",
"876710/images/image_2_compressed.jpg",
"876710/images/im... | [
"876710/stls/0.stl",
"876710/stls/1.stl",
"876710/stls/2.stl",
"876710/stls/3.stl",
"876710/stls/4.stl",
"876710/stls/5.stl",
"876710/stls/6.stl",
"876710/stls/7.stl",
"876710/stls/8.stl",
"876710/stls/9.stl",
"876710/stls/a.stl",
"876710/stls/b.stl",
"876710/stls/c.stl",
"876710/stls/d.st... | CC0 | https://www.printables.com/model/876710 | data_0044.tar |
362786 | Houses and Hotel for Monopoly | <p>We owned an old Monopoly game with lost parts. We manage to design new parts. <br><br>The design is from my 12 years old son.</p> | [
"house",
"hotel",
"monopolygame"
] | Toys & Games > Board Games | [
"362786/images/image_1_compressed.jpg",
"362786/images/image_2_compressed.jpg"
] | [
"362786/stls/hotel.stl",
"362786/stls/house.stl"
] | GPL3.0 | https://www.printables.com/model/362786 | data_0044.tar |
235407 | Houslový klíč / Treble clef | [
"music",
"notes",
"trebleclef",
"song"
] | Art & Design > 2D Plates & Logos | [
"235407/images/image_1_compressed.jpg"
] | [
"235407/stls/houslovyKlic.stl"
] | CC-BY | https://www.printables.com/model/235407 | data_0044.tar | |
377911 | HOW TO TRAIN YOUR DRAGON TOOTHLESS KNOB | How to train your dragon toothless door knob kitchen cabinets. | Download free 3D printable STL models | [] | Art & Design > Sculptures | [
"377911/images/image_1_compressed.jpg"
] | [
"377911/stls/TOOTHLESS KNOB.stl"
] | CC0 | https://www.printables.com/model/377911 | data_0044.tar |
845015 | HP EliteDesk 800 G2 rack | <p>A "quick and dirty" rack to position a cluster of 3 HP EliteDesk 800 G2 on a shelf.</p><p>Printed in PETG, with support for the holes</p><p>Each desktop is secured with 4 M4x10 screws using the VESA mount under the desktop.</p><p>Next step: real integration into a 19" rack tower. A little concerned about the w... | [] | Gadgets > Computers | [
"845015/images/image_1_compressed.jpg",
"845015/images/image_2_compressed.jpg"
] | [
"845015/stls/SuppportPVE-Body.stl"
] | CC-BY | https://www.printables.com/model/845015 | data_0044.tar |
451080 | HP G2 Dock | <p>I downloaded the HP G4 Dock bracket hoping it would fit my G2 laptop dock. Unfortunately, it was just a bit too short and the tabs would not fit over the top.</p><p>I extended the height of the bracket by 3mm overall and then cut out 2.5mm from the underside in order to keep strength and let the dock fit.</p> | [] | Gadgets > Computers | [
"451080/images/image_1_compressed.jpg",
"451080/images/image_2_compressed.jpg",
"451080/images/image_3_compressed.jpg"
] | [
"451080/stls/G2 Dock.stl"
] | CC-BY | https://www.printables.com/model/451080 | data_0044.tar |
1258760 | HP G5 USB-C Dock and Power Supply Under Table Mount | <p>I created this to clean up a conference room installation, the dock used to sit on the table and it looked better under the table with only the usb-c cable on the table. The dock does not block an air vents, buttons, or ports. It can be printed with no supports (assuming your printer can handle a 45* sla... | [
"usbc",
"hp",
"undertablemount",
"dockingstationmount"
] | Gadgets > Computers | [
"1258760/images/image_1_compressed.jpg",
"1258760/images/image_2_compressed.jpg",
"1258760/images/image_3_compressed.jpg"
] | [
"1258760/stls/HP G5 Dock and Power Supply UnderTable Mount.stl"
] | CC-BY | https://www.printables.com/model/1258760 | data_0044.tar |
526642 | HP KU-1156 keyboard - replacement leg | HP KU-1156 keyboard - replacement leg | Download free 3D printable STL models | [
"leg",
"keyboard"
] | Gadgets > Computers | [
"526642/images/image_1_compressed.jpg",
"526642/images/image_2_compressed.jpg",
"526642/images/image_3_compressed.jpg"
] | [
"526642/stls/HP KU-1156 keyboard - replacement leg.stl"
] | CC0 | https://www.printables.com/model/526642 | data_0044.tar |
296944 | HP Laptop Charger Holder - Mount | <p>Get your charger off the floor! This holder is designed to hold a HP USB-C 65W Laptop Charger. The charger easily slips in and out of the holder. It has two indents on the back perfectly sized for 1” double sided mounting tape squares.</p> | [
"holder",
"mount",
"charger",
"laptop",
"hplaptop"
] | Gadgets > Computers | [
"296944/images/image_1_compressed.jpg"
] | [
"296944/stls/Holder for HP USB-C 65W Laptop Charger.stl"
] | CC-BY | https://www.printables.com/model/296944 | data_0044.tar |
404735 | HP ProDesk stand | <p>Stand for HP ProDesk mini PCs. Works with HP ProDesk 400 G6/G7 mini and HP Pro Mini 400 G9 and probably also for a lot of similar models.</p><p>Printed in PLA with 0.30mm layer height, no supports needed.</p> | [
"stand",
"fusion360",
"minipc",
"hpprodesk"
] | Gadgets > Computers | [
"404735/images/image_1_compressed.jpg",
"404735/images/image_2_compressed.jpg"
] | [
"404735/stls/prodesk stand.stl"
] | CC-BY | https://www.printables.com/model/404735 | data_0044.tar |
209035 | HP Zbook Fury 17 G7 Vertical Stand (Modified) | <p>This is a remix of <strong>10broeck</strong>'s laptop stand design that just shaves off a portion of the back so that I don't have to slide the stands on from the side. Now I can just set the laptop down into the stands or lift the laptop out of the stands more easily, which fits my desktop setup better.</p><p>I'm s... | [] | Gadgets > Computers | [
"209035/images/image_1_compressed.jpg",
"209035/images/image_2_compressed.jpg"
] | [
"209035/stls/HP Zbook Fury 17 G7 Stand (split) Modified.stl"
] | CC-BY | https://www.printables.com/model/209035 | data_0044.tar |
122114 | HPE DL380p/DL360p Gen8+ SFF 2.5" SSD/HDD Caddy | <p>This is a hybrid between 2 prints I had found on Thingiverse that had ups and downs. The first one fit perfectly, but the front looked horrendous. The second didn't fit well, but looked great. I mixed them and used that to make a cleaner mesh model that was hence much easier to print reliably.</p><p> </p><p>The... | [
"server",
"caddy",
"hpe",
"g9",
"25hdd",
"sff",
"25ssd",
"dl360p",
"gen8",
"dl380p",
"gen9",
"g8"
] | Gadgets > Computers | [
"122114/images/image_1_compressed.jpg"
] | [
"122114/stls/dl380p-dl360p_g8_caddy_v1.stl"
] | CC0 | https://www.printables.com/model/122114 | data_0044.tar |
490762 | HSW Bee | <p>My mom told me I needed a bee. Modified a cute-ass bee earring, stuck it on a hsw post, and here we are. <br> </p><p>I printed with .6n because I am impatient. I uploaded an stl, .4 PETG, .4 PLA, and .6 PETG (which is what I used). </p> | [
"honeycombstoragewall",
"hsw"
] | Household > Home Decor | [
"490762/images/image_1_compressed.jpg"
] | [
"490762/stls/HSW Bee.stl"
] | CC-BY | https://www.printables.com/model/490762 | data_0044.tar |
996776 | HSW Cable Hanger - Remix - Short | <p>This is a HSW Cable Hanger designed by Andy Smallfry and remixed by me for people who have a smaller version of HSW.<br> </p> | [
"holder",
"cable",
"hsw"
] | Gadgets > Other Gadgets | [
"996776/images/image_1_compressed.jpg"
] | [
"996776/stls/HSW Cable Hanger - Remix Slim.stl"
] | CC-BY | https://www.printables.com/model/996776 | data_0044.tar |
292743 | HSW Cable Routing Clips | <p>Built in Onshape: <a href="https://cad.onshape.com/documents/0a23a3bafdbb1c9219c1536b/w/f8af3cbc7d856e8ea7dc0534/e/3c7af306953b55b3ec0ba495?renderMode=0&uiState=63448cb62e6ab355012f1c2e">https://cad.onshape.com/documents/0a23a3bafdbb1c9219c1536b/w/f8af3cbc7d856e8ea7dc0534/e/3c7af306953b55b3ec0ba495?renderMode=0&... | [] | Hobby & Makers > Organizers | [
"292743/images/image_1_compressed.jpg",
"292743/images/image_2_compressed.jpg",
"292743/images/image_3_compressed.jpg"
] | [
"292743/stls/Cable Router - Loose Clip.stl",
"292743/stls/Cable Router - Peg.stl",
"292743/stls/Cable Router - Tight Clip (2mm).stl",
"292743/stls/Cable Router - Tight Clip (3mm).stl",
"292743/stls/Cable Router - Tight Clip (4mm).stl",
"292743/stls/Cable Router - Tight Clip (5mm).stl"
] | CC0 | https://www.printables.com/model/292743 | data_0044.tar |
405935 | HSW for Bambu X1C or P1P - 4 Layer print | <p>This should only fit the Bambu X1C or P1P</p><p>This takes KYZ's updated panel and adds a single layer of Bambu 'Support W' breakaway filament. It should only use 6.3g of Support W for 4 panels of HSW. I wanted to stack panels so that the print would finish overnight rather than have to bed prep 4 times... | [
"wall",
"storage",
"honeycomb",
"hsw",
"kyz",
"rostap"
] | Hobby & Makers > Organizers | [
"405935/images/image_1_compressed.jpg",
"405935/images/image_2_compressed.jpg",
"405935/images/image_3_compressed.jpg"
] | [
"405935/stls/WallPlate_Bambu_2layers_V2.stl",
"405935/stls/WallPlate_Bambu_3layers_V2.stl",
"405935/stls/WallPlate_Bambu_4layers_V2.stl"
] | CC-BY | https://www.printables.com/model/405935 | data_0044.tar |
254512 | HSW Headphone Mount | <p> One is the normal version and the other is reinforced for heavier headphones. I have a pair of V-Moda M100s and use the normal one. They seem to hold up pretty well.</p><p> </p><p>Printer on an Ender 3</p> | [
"headphones",
"headphoneholder",
"headphonestand",
"headphonehook",
"headphonehanger",
"headphonemount"
] | Art & Design > Wall-mounted | [
"254512/images/image_1_compressed.jpg",
"254512/images/image_2_compressed.jpg",
"254512/images/image_3_compressed.jpg"
] | [
"254512/stls/HSW Headphone Mount with support.stl",
"254512/stls/HSW Headphone Mount.stl"
] | CC0 | https://www.printables.com/model/254512 | data_0044.tar |
555308 | HSW hexagonal baskets v2 with full bottom | <p>This model is similar as <a href="https://www.printables.com/cs/model/479178-hsw-hexagonal-baskets-v2">HSW hexagonal baskets v2</a>, but it has full bottom. It is great for pencil holders.</p><p>The walls of the basket are perforated with the same dimensions as the HSW basket. The walls are 4mm thick, except the bac... | [
"honeycomb",
"pencilholder",
"basket",
"honeycombstorage",
"honeycombstoragewall",
"honeycombwall",
"hsw"
] | Hobby & Makers > Organizers | [
"555308/images/image_1_compressed.jpg",
"555308/images/image_2_compressed.jpg",
"555308/images/image_3_compressed.jpg",
"555308/images/image_4_compressed.jpg",
"555308/images/image_5_compressed.jpg",
"555308/images/image_6_compressed.jpg",
"555308/images/image_7_compressed.jpg"
] | [
"555308/stls/hsw_hex_baskets_full_bottom_w100h100.stl",
"555308/stls/hsw_hex_baskets_full_bottom_w100h110.stl",
"555308/stls/hsw_hex_baskets_full_bottom_w100h120.stl",
"555308/stls/hsw_hex_baskets_full_bottom_w100h130.stl",
"555308/stls/hsw_hex_baskets_full_bottom_w100h140.stl",
"555308/stls/hsw_hex_baske... | CC-BY | https://www.printables.com/model/555308 | data_0044.tar |
1540245 | HSW holder for Optimized Bed Scraper XL and 10 blades | <p>Just a HSW holder for popular Optimized Bed Scraper XL and 10 blades.</p><p>Easy to print with spring loaded pin for attaching to HSW</p><p>Support lower part of holder with one HSW connector so it sits flush</p><p>Printing </p><p>Tested with PETG, 0.2 layer height, 3 walls </p><p></p><p></p><p>-----------... | [] | 3D Printers > Accessories | [
"1540245/images/image_1_compressed.jpg"
] | [
"1540245/stls/holder.stl",
"1540245/stls/pin v2.stl"
] | CC-BY | https://www.printables.com/model/1540245 | data_0044.tar |
488383 | HSW Knipex pliers holder (34mm) | <p>This is a remix of the <a href="https://www.printables.com/model/113705-customizable-knipex-wall-mount-vde">Customizable Knipex Wall Mount (VDE)</a> and the amazing <a href="https://www.printables.com/model/152592-honeycomb-storage-wall">Honeycomb Storage Wall (HSW)</a> fitting 34mm (width)Knipex pliers.</p><p>I've ... | [
"knipex",
"knipexholder",
"hsw"
] | Art & Design > Wall-mounted | [
"488383/images/image_1_compressed.jpg",
"488383/images/image_2_compressed.jpg"
] | [
"488383/stls/HSW Knipex 34mm no supports.stl",
"488383/stls/HSW Knipex 34mm.stl"
] | CC-BY | https://www.printables.com/model/488383 | data_0044.tar |
901642 | HSW Multimeter Mount - Side Storage & HSW Pegs | <p>Storage for multimeters of a “Shield” style shape (modelled after a Etekcity Digital Multimeter). Side clips allow loose storage of probes with compartment for loose cabeling. Rear contains x2 Hex Pegs for HSW</p> | [
"multimeter",
"hsw",
"hswinsert",
"hswmount"
] | Hobby & Makers > Organizers | [
"901642/images/image_1_compressed.jpg"
] | [
"901642/stls/HSW MultiMeter.stl"
] | CC-BY | https://www.printables.com/model/901642 | data_0044.tar |
897136 | HSW Pliers / Cutter Holder | <p>Support for pliers compatible with <a href="https://www.printables.com/fr/model/152592-honeycomb-storage-wall/files">Honeycomb Storage Wall</a>. <i>Perfect for Creality pliers.</i></p><p>You will need <strong>insert-empty (</strong>x2<strong>) </strong>from <a href="https://www.printables.com/fr/model/152592-honeyco... | [
"support",
"cutter",
"honeycomb",
"pliers",
"honeycombstoragewall",
"hsw",
"clipers"
] | Household > Garage | [
"897136/images/image_1_compressed.jpg",
"897136/images/image_2_compressed.jpg",
"897136/images/image_3_compressed.jpg",
"897136/images/image_4_compressed.jpg"
] | [
"897136/stls/HSWPliersHolder.stl"
] | GPL2.0 | https://www.printables.com/model/897136 | data_0044.tar |
843812 | HSW Prusa Spatula holder | [
"prusa",
"spatula",
"hsw",
"hswholder"
] | Hobby & Makers > Organizers | [
"843812/images/image_1_compressed.jpg"
] | [
"843812/stls/HSW_Prusa_Spatula_holder.stl"
] | CC0 | https://www.printables.com/model/843812 | data_0044.tar | |
490746 | HSW Xbox One Controller Holder | <p>Made it so the adapter prints as part of it, sturdier.</p> | [] | Hobby & Makers > Organizers | [
"490746/images/image_1_compressed.jpg",
"490746/images/image_2_compressed.jpg",
"490746/images/image_3_compressed.jpg"
] | [
"490746/stls/HSW Xbox Controller.stl"
] | CC-BY | https://www.printables.com/model/490746 | data_0044.tar |
1410123 | HTLF Roller Cams | <p>Roller cams for the HTLF mmu. </p><p>Uses MR63ZZ bearings (2 per cam, 8 total): <a href="https://www.amazon.com/dp/B075CMRGY6?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1">https://www.amazon.com/dp/B075CMRGY6?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1</a></p><p>M3 SHCS (3 10mm, 1 12mm)</p><p>One BT Cereal print ... | [
"mmu",
"htlf"
] | 3D Printers > Other Printer Parts & Upgrades | [
"1410123/images/image_1_compressed.jpg",
"1410123/images/image_2_compressed.jpg",
"1410123/images/image_3_compressed.jpg"
] | [
"1410123/stls/HTLF_Roller_Cams.stl"
] | GPL3.0 | https://www.printables.com/model/1410123 | data_0044.tar |
487557 | Huawei Inverter SUN2000 Fanduct / 4x 92mm fans | <p>You need 4 90/92mm fans. Print the two parts and glue them together. The duct is mounted with 2 screws on each side. For the fans you need m3 screws. On the back are holes for zipties.</p><p> </p><p>Post a make :)</p> | [] | Hobby & Makers > Electronics | [
"487557/images/image_1_compressed.jpg",
"487557/images/image_2_compressed.jpg"
] | [
"487557/stls/sun2000_fanduct1.stl",
"487557/stls/sun2000_fanduct2.stl"
] | CC-BY | https://www.printables.com/model/487557 | data_0044.tar |
286844 | Huawei Watch Fit Charging Dock | <p>Didn't like the options out (not many) so i made my own. Friction fit charging cable then hot glue to secure.</p><p>PLA</p><p>INFILL 25%</p><p>Use support if need. Or just tip on its side.</p> | [
"dock",
"charging",
"fit",
"watch",
"huawei"
] | Household > Other House Equipment | [
"286844/images/image_1_compressed.jpg",
"286844/images/image_2_compressed.jpg"
] | [
"286844/stls/Fit Watch Charge v4.stl"
] | CC0 | https://www.printables.com/model/286844 | data_0044.tar |
537066 | Huawei Watch Fit2 Desk Charger | <p>I needed a Watch charger, since the Huawei one is to loose, if you use it on the desk. And since ich didnt want to do the whole thing on my own, i remixed these 2:</p><p>Mix of Wall Mount Charger by BC <br><a href="https://www.printables.com/model/336303-huawei-watch-fit-2-charger-wall-mount">https://www.printa... | [] | Household > Office | [
"537066/images/image_1_compressed.jpg",
"537066/images/image_2_compressed.jpg",
"537066/images/image_3_compressed.jpg",
"537066/images/image_4_compressed.jpg"
] | [
"537066/stls/Fit 2 Charger.stl",
"537066/stls/Fit 2 wall charger v13.stl"
] | CC-BY | https://www.printables.com/model/537066 | data_0044.tar |
951113 | Hueforge Darth Vader | <h3><strong>Description</strong></h3><p>Print at 100% infill with a layer height of 0.08mm with a base layer of <strong>0.1mm</strong></p><p><strong>Swap Instructions:</strong><br>Start with Black<br>At layer #7 (0.58mm) swap to Jade White<br>At layer #15 (1.22mm) swap to gris<br>At layer #16 (1.3mm) swap to rojo<... | [
"darth",
"starwars",
"laser",
"hue",
"darthvader",
"darthvaderstarwars",
"hueforge",
"cuadros",
"hueforgeart"
] | Household > Home Decor | [
"951113/images/image_1_compressed.jpg",
"951113/images/image_2_compressed.jpg",
"951113/images/image_3_compressed.jpg"
] | [
"951113/stls/DarkVader_Front_126x160_D1_CP.stl"
] | GPL3.0 | https://www.printables.com/model/951113 | data_0044.tar |
1043364 | Hueforge Han Solo | <p>Print at 100% infill with a layer height of 0.08mm with a base layer of <strong>0.1mm</strong></p><p><strong>Swap Instructions:</strong><br>Start with Black<br>At layer #7 (0.58mm) swap to Jade White</p> | [
"starwars",
"star",
"hansolo",
"harrisonford",
"han",
"hue",
"harrison",
"hueforge",
"harrisonfor"
] | Household > Home Decor | [
"1043364/images/image_1_compressed.jpg",
"1043364/images/image_2_compressed.jpg",
"1043364/images/image_3_compressed.jpg"
] | [
"1043364/stls/harrison ford.stl",
"1043364/stls/Harry_Front_150x150.stl"
] | GPL3.0 | https://www.printables.com/model/1043364 | data_0044.tar |
980529 | Hueforge Hollow Knight | <p>Print at 100% infill with a layer height of 0.08mm with a base layer of <strong>0.1mm</strong></p><p><strong>Swap Instructions:</strong><br>Start with Black<br>At layer #7 (0.58mm) swap to Jade White for the rest.</p> | [
"decor",
"knight",
"hue",
"hollow",
"art2d",
"hueforce",
"150x150"
] | Household > Home Decor | [
"980529/images/image_1_compressed.jpg",
"980529/images/image_2_compressed.jpg",
"980529/images/image_3_compressed.jpg"
] | [
"980529/stls/hollow knight.stl"
] | GPL3.0 | https://www.printables.com/model/980529 | data_0044.tar |
983581 | Hueforge Mapache | <p>Presentamos un encantador **HueForge** en 3D que captura la esencia traviesa y curiosa de un mapache. 🦝✨ Esta obra en 3D destaca por sus detalles intrincados, desde el suave pelaje hasta los brillantes ojos de este adorable animal. Cada elemento está diseñado para dar vida a la expresión juguetona del mapache, haci... | [
"animal",
"decor",
"animals",
"guardian",
"hue",
"guardiansofthegalaxy",
"raccoon",
"art2d",
"hueforge",
"cuadros",
"hueforgeart",
"mapache"
] | Household > Home Decor | [
"983581/images/image_1_compressed.jpg",
"983581/images/image_2_compressed.jpg",
"983581/images/image_3_compressed.jpg"
] | [
"983581/stls/Mapache_Front_150x150.stl"
] | GPL3.0 | https://www.printables.com/model/983581 | data_0044.tar |
978329 | Hueforge Naruto | <p>Print at 100% infill with a layer height of 0.08mm with a base layer of<strong> 0.1mm</strong></p><p><strong>Swap Instructions:</strong><br>Start with Charcoal Black<br>At layer #7 (0.58mm) swap to White for the rest.</p> | [
"decor",
"2d",
"hue",
"naruto",
"kakashi",
"art2d",
"hueforge",
"cuadros",
"jiraiya"
] | Household > Home Decor | [
"978329/images/image_1_compressed.jpg",
"978329/images/image_2_compressed.jpg",
"978329/images/image_3_compressed.jpg",
"978329/images/image_4_compressed.jpg"
] | [
"978329/stls/Naruto.stl",
"978329/stls/Naruto_Front_150x150_D1_CP.stl"
] | GPL3.0 | https://www.printables.com/model/978329 | data_0044.tar |
1020235 | Hueforge of an eagle | <p>Print at 100% infill with a layer height of 0.08mm with a base layer of <strong>0.1mm</strong></p><p><strong>Swap Instructions:</strong><br>Start with Black<br>At layer #7 (0.58mm) swap to White<br>At layer #14 (1.14mm) swap to Black<br>At layer #15 (1.22mm) swap to Blue<br>At layer #19 (1.54mm) swap to White for th... | [
"animal",
"decor",
"eagle",
"decoracion",
"hue",
"ave",
"cuadro",
"art3d",
"art2d",
"hueforge"
] | Household > Home Decor | [
"1020235/images/image_1_compressed.jpg",
"1020235/images/image_2_compressed.jpg",
"1020235/images/image_3_compressed.jpg"
] | [
"1020235/stls/Aguila_Front_150x150.stl"
] | GPL3.0 | https://www.printables.com/model/1020235 | data_0044.tar |
1075673 | Hueforge pennywise with his balloon | <p>Print at 100% infill with a layer height of 0.08mm with a base layer of <strong>0.1mm</strong></p><p><strong>Swap Instructions:</strong><br>Start with Black<br>At layer #7 (0.58mm) swap to Jade White<br>At layer #14 (1.14mm) swap to Black<br>At layer #15 (1.22mm) swap to Red for the rest.</p> | [
"it",
"decor",
"hue",
"pennywise",
"art3d",
"art2d",
"hueforge",
"payaso"
] | Household > Home Decor | [
"1075673/images/image_1_compressed.jpg"
] | [
"1075673/stls/Payaso y globo.stl",
"1075673/stls/Payaso y globo_Front_139x150.stl"
] | GPL3.0 | https://www.printables.com/model/1075673 | data_0044.tar |
951102 | Hueforge Super Mario Bros | <h3><strong>Description</strong></h3><p>Print at 100% infill with a layer height of 0.08mm with a base layer of <strong>0.1mm</strong></p><p><strong>Swap Instruction</strong>s:<br>Start with negro SmartFill<br>At layer #8 (0.66mm) swap to rojo SmartFill<br>At layer #13 (1.06mm) swap to naranja Bambu<br>At layer #16 (1.... | [
"supermario",
"hue",
"luigi",
"mariobros",
"80",
"art2d",
"hueforge"
] | Household > Home Decor | [
"951102/images/image_1_compressed.jpg",
"951102/images/image_2_compressed.jpg",
"951102/images/image_3_compressed.jpg"
] | [
"951102/stls/3 colores_Front_145x216_S_C.stl"
] | GPL3.0 | https://www.printables.com/model/951102 | data_0044.tar |
1035331 | Hueforge Vegeta pencil | <p>Print at 100% infill with a layer height of 0.08mm with a base layer of <strong>0.1mm</strong></p><p><strong>Swap Instructions:</strong><br>Start with Black<br>At layer #8 (0.66mm) swap to Jade White for the rest.</p> | [
"pencil",
"decor",
"vegeta",
"hue",
"dbz",
"ss3",
"art2d",
"hueforge",
"ss2",
"giku"
] | Household > Home Decor | [
"1035331/images/image_1_compressed.jpg",
"1035331/images/image_2_compressed.jpg",
"1035331/images/image_3_compressed.jpg"
] | [
"1035331/stls/Vegeta B N.stl",
"1035331/stls/Vegetta_Front_150x150.stl"
] | GPL3.0 | https://www.printables.com/model/1035331 | data_0044.tar |
267289 | Huffy Mountain Bike Handlebar Grip | <p>This is a replacement grip for an 18 speed Huffy mountain bike. Print with TPU at 30% infill, no supports needed.</p> | [
"grip",
"mountain",
"bicycle",
"bike",
"mountainbike",
"handlebar",
"huffy"
] | Household > Outdoor & Garden | [
"267289/images/image_1_compressed.jpg"
] | [
"267289/stls/Grip-TPU.stl"
] | CC-BY | https://www.printables.com/model/267289 | data_0044.tar |
1107671 | HULA v1.0 for K2 Plus (Vibration Feet) | <p>This is a simple adapter to use the HULA feet with the K2 Plus. Since remixing is not allowed of the original model, I cannot include those files in this repository however a screenshot of the TPU parts and PETG or PLA parts will be included for reference of what you need. You can download the latest parts from the ... | [
"creality",
"feet",
"plus",
"vibration",
"v1",
"stabilizer",
"remove",
"k2",
"shake",
"quieter",
"dampen",
"hula",
"soften"
] | 3D Printers > Other Printer Parts & Upgrades | [
"1107671/images/image_1_compressed.jpg",
"1107671/images/image_2_compressed.jpg"
] | [
"1107671/stls/HULA v1 K2 Plus Foot Adapter.stl"
] | CC-BY | https://www.printables.com/model/1107671 | data_0044.tar |
1496496 | Human and dog (decoration) | <p>A simple 3d model of a man with a dog.</p><p>Nozzle: 0.4</p><p>Support: NO</p><p>Infil: 10%</p><p>Materials: PLA</p> | [
"decoration",
"dog",
"human",
"pes",
"socha",
"clovek",
"sousneni",
"vystav"
] | Art & Design > Sculptures | [
"1496496/images/image_1_compressed.jpg",
"1496496/images/image_2_compressed.jpg"
] | [
"1496496/stls/DOG.stl",
"1496496/stls/HUMAN.stl"
] | CC0 | https://www.printables.com/model/1496496 | data_0044.tar |
560814 | Human Nose + Keychain | <p>I don't know why you would want or need a nose but its here.</p><p>The keychain model has a hole so you can hang it from things.</p><p>Scale to whatever size you prefer.</p><p> </p><p>If anyone has any questions please contact me,</p><p>THop3D</p> | [
"funny",
"fun",
"gadget",
"keychain",
"keychains",
"nose",
"noses"
] | Gadgets > Other Gadgets | [
"560814/images/image_1_compressed.jpg",
"560814/images/image_2_compressed.jpg"
] | [
"560814/stls/Nose Keychain.stl",
"560814/stls/Nose.stl"
] | CC-BY | https://www.printables.com/model/560814 | data_0044.tar |
259596 | Human, dog and cat | <p>Human, dog and cat for gift or decoration</p><p>Infill 20%<br>No Supports<br>PLA</p> | [
"decoration",
"man",
"dog",
"pet",
"cat",
"decor",
"gift",
"human",
"pets",
"dogs"
] | Household > Pets | [
"259596/images/image_1_compressed.jpg",
"259596/images/image_2_compressed.jpg",
"259596/images/image_3_compressed.jpg"
] | [
"259596/stls/cat.stl",
"259596/stls/dog.stl",
"259596/stls/human-dog-cat.stl",
"259596/stls/human.stl"
] | CC0 | https://www.printables.com/model/259596 | data_0044.tar |
171963 | Humble spool holder (MINI remix) | <p>The box I'm using for a filament dry box does not have any extra height, so I took the basic dimensions of the Prusa Mini spool holder and lowered it as far I I could. I also added mounting blocks to (copies of) the rails to allow the spool holder to be attached to the bottom of the box.</p><p>These rails are ... | [
"drybox",
"spoolholder"
] | 3D Printers > Accessories | [
"171963/images/image_1_compressed.jpg"
] | [
"171963/stls/humble-spoolholder-base.stl",
"171963/stls/humble-spoolholder-rail.stl"
] | GPL2.0 | https://www.printables.com/model/171963 | data_0044.tar |
68704 | Hummingbird with exposed infill | <p>This is a bit of a do-it-yourself project to print a hummingbird silhouette with interesting infill. The basic idea is to print the interior with no top or bottom layers to expose the infill. When you first import the STL, it will look solid, but it is actually composed of an exterior and an interior as shown in the... | [] | World & Scans > Animals | [
"68704/images/image_1_compressed.jpg",
"68704/images/image_2_compressed.jpg",
"68704/images/image_3_compressed.jpg",
"68704/images/image_4_compressed.jpg",
"68704/images/image_5_compressed.jpg",
"68704/images/image_6_compressed.jpg"
] | [
"68704/stls/Hummingbird.stl"
] | CC-BY | https://www.printables.com/model/68704 | data_0044.tar |
932838 | hunger games bookmark | [
"bookmark",
"hungergames"
] | Hobby & Makers > Other Ideas | [
"932838/images/image_1_compressed.jpg",
"932838/images/image_2_compressed.jpg"
] | [
"932838/stls/bookmark.stl"
] | CC-BY | https://www.printables.com/model/932838 | data_0044.tar | |
550562 | Hungry Turtle | <p>you can use rubber bands if you want to, i personally dont, the print comes with two sets of clips to get the ones you like personally, i also end up supergluing mine shut so it doesnt look and work weird.</p><p>fun to play with</p><p>no supports</p><p>use brim (optional depending on printer)</p> | [
"gear",
"turtle",
"gearedextruder"
] | 3D Printers > Accessories | [
"550562/images/image_1_compressed.jpg",
"550562/images/image_2_compressed.jpg",
"550562/images/image_3_compressed.jpg",
"550562/images/image_4_compressed.jpg"
] | [
"550562/stls/turtle.stl"
] | CC0 | https://www.printables.com/model/550562 | data_0044.tar |
1280865 | Hunny Pot (Winnie the Pooh Style) |
<p>This is a Winnie the Pooh style "Hunny Pot". I did this design for my wife, and I've gotten a lot of positive feedback on this design.</p>
<h3>How I Designed This</h3>
<p><strong>Initial Hunny Pot Design</strong></p>
<div><p>I designed this model in Blender using 2D paths for the initial design, in combination wi... | [
"disney",
"winniethepooh",
"thingiverse",
"hunnypot"
] | Household > Home Decor | [
"1280865/images/image_1_compressed.jpg"
] | [
"1280865/stls/hunny_pot.stl"
] | CC-BY | https://www.printables.com/model/1280865 | data_0044.tar |
402826 | Hunter X Hunter - Ikalgo (Annoyed/Angry) | <p>A 3D STL of Ikalgo from the Hunter X Hunter anime. This model was made in Blender. It stands 100mm tall (Although you can size it to your liking). I had great results printing it on an mSLA printer (SL1).</p> | [
"squid",
"anime",
"manga",
"hunter",
"hunterxhunter"
] | Toys & Games > Action Figures & Statues | [
"402826/images/image_1_compressed.jpg",
"402826/images/image_2_compressed.jpg",
"402826/images/image_3_compressed.jpg",
"402826/images/image_4_compressed.jpg"
] | [
"402826/stls/Ikalgo.stl"
] | CC0 | https://www.printables.com/model/402826 | data_0044.tar |
1799 | Hush-98 Jedi Comlink - Star Wars | <p>Update: I originally posted this model on Thingiverse a while ago, and had updated and added mods for it there but not here. I will eventually move them over to this site, but for now if you want the most current version you can still find it there: <a href="https://www.thingiverse.com/thing:3531129">https://www.thi... | [
"display",
"starwars",
"stand",
"prop",
"star",
"wars",
"jedi",
"98",
"hush",
"comlink",
"communicator"
] | Costumes & Accessories > Props | [
"1799/images/image_1_compressed.jpg",
"1799/images/image_2_compressed.jpg",
"1799/images/image_3_compressed.jpg",
"1799/images/image_4_compressed.jpg",
"1799/images/image_5_compressed.jpg",
"1799/images/image_6_compressed.jpg",
"1799/images/image_7_compressed.jpg"
] | [
"1799/stls/jedi-comlink-antenna.stl",
"1799/stls/jedi-comlink-body.stl",
"1799/stls/jedi-comlink-front-tab.stl",
"1799/stls/jedi-comlink-grill-tab.stl",
"1799/stls/jedi-comlink-microphone.stl",
"1799/stls/jedi-comlink-rear-bent-tab.stl",
"1799/stls/jedi-comlink-rear-round.stl",
"1799/stls/jedi-comlink... | CC-BY | https://www.printables.com/model/1799 | data_0044.tar |
979087 | HVAC vent deflector (magnetic) | <p>This is a magnetically attached vent deflector suitable for ceiling mounting, too. Magnets are 8x3 neodymium, this is the pack I bought (200 for $13.99) <a href="https://www.amazon.com/gp/product/B0CCXH6W5Q">https://www.amazon.com/gp/product/B0CCXH6W5Q</a></p><p>I used PETG since it will have hot air blowing o... | [
"magnetic",
"vent",
"deflector",
"hvac",
"hvacvent"
] | Household > Other House Equipment | [
"979087/images/image_1_compressed.jpg",
"979087/images/image_2_compressed.jpg",
"979087/images/image_3_compressed.jpg",
"979087/images/image_4_compressed.jpg",
"979087/images/image_5_compressed.jpg"
] | [
"979087/stls/HVAC Deflector base.stl",
"979087/stls/HVAC Deflector slide.stl",
"979087/stls/HVAC Deflector.stl"
] | GPL3.0 | https://www.printables.com/model/979087 | data_0044.tar |
319167 | Hydration tank drying clip (carries hose and other parts). |
<p>Hydration tank drying clip wich incorporates attachment points for other parts, bite valve, valve, hose.All drying at one place.</p>
<h3>Print Settings</h3>
<p><strong>Rafts:</strong></p>
<p>No</p>
<p class="detail-setting supports"><strong>Supports: </strong>
<div><p>No</p></div>
<p><strong>Resolution:</strong><... | [
"thingiverse",
"camelbak",
"hydrationpack"
] | Sports & Outdoor > Outdoor Sports | [
"319167/images/image_1_compressed.jpg"
] | [
"319167/stls/camelbak_drying_clip.stl"
] | CC-BY | https://www.printables.com/model/319167 | data_0044.tar |
69410 | hydraulic pump | <p>an hydraulic pump designed to empty cans of HV46.</p><p>tested with water and mineral oil</p><p>use it with a drilling machine </p><p>updates will come</p><p>P/S in BSP 3/8</p> | [] | Hobby & Makers > Tools | [
"69410/images/image_1_compressed.jpg",
"69410/images/image_2_compressed.jpg",
"69410/images/image_3_compressed.jpg",
"69410/images/image_4_compressed.jpg",
"69410/images/image_5_compressed.jpg"
] | [
"69410/stls/BODY.stl",
"69410/stls/Composant2.stl",
"69410/stls/gear v6.stl",
"69410/stls/TOP.stl"
] | CC-BY | https://www.printables.com/model/69410 | data_0044.tar |
238015 | HydroFlask Car Cup Holder Adaptor | <p>Designed for the 40oz / 1.2L HydroFlask bottle.</p><p>Measurements of the section that goes into the car's cup holder:<br>Diameter: <strong>7.5 cm</strong><br>Height: <strong>5.72 cm</strong></p> | [
"cup",
"holder",
"car",
"cupholder",
"hydroflask",
"adaptor"
] | Hobby & Makers > Automotive | [
"238015/images/image_1_compressed.jpg"
] | [
"238015/stls/ThermoFlask Car Adaptor.stl"
] | CC-BY | https://www.printables.com/model/238015 | data_0044.tar |
226770 | HydroHex Plant Pot With Built In Drainage | <p>This model can be easily scaled in the slicer to be taller and larger to accommodate different plants, and add diversity to the plant pots with ease!</p><p>Optional teardrop drainage hole to let water evaporate, if that's your plants kind of thing 😉 </p><p>Zero supports needed!</p> | [
"hexagon",
"pot",
"plant",
"succulent",
"cactus",
"garden",
"hex",
"plants",
"succulents",
"indoorplanter",
"cacti",
"indoorplant",
"bencostudios",
"benco"
] | Household > Home Decor | [
"226770/images/image_1_compressed.jpg",
"226770/images/image_10_compressed.jpg",
"226770/images/image_2_compressed.jpg",
"226770/images/image_3_compressed.jpg",
"226770/images/image_4_compressed.jpg",
"226770/images/image_5_compressed.jpg",
"226770/images/image_6_compressed.jpg",
"226770/images/image_... | [
"226770/stls/Plant_Pot_Final.stl",
"226770/stls/Water_Pot_Final.stl",
"226770/stls/Water_Pot_Solid_Final.stl"
] | CC0 | https://www.printables.com/model/226770 | data_0044.tar |
500262 | hydrophonic avocado coarse holder | <p>hydrophonic avocado coarse holder for coarses from 45mm to 65mm radious. </p><p>Just put the printed part on an jar, fill with water and wait for the nature magic. The roots started growing in 2 or 3 weeks (the picture is in 4 to 6 weeks)</p><p>full editable file in fusion360 for any jar or aocado size.</p> | [
"avocado",
"glass",
"jar",
"hydrophonic"
] | Household > Outdoor & Garden | [
"500262/images/image_1_compressed.jpg",
"500262/images/image_2_compressed.jpg",
"500262/images/image_3_compressed.jpg"
] | [
"500262/stls/Avocado_Coarse_Holder_minimum_45mm_coarse_and_64mm_inside_jar_radius.stl"
] | CC0 | https://www.printables.com/model/500262 | data_0044.tar |
1073278 | Hygrometer Fitting | [
"drybox",
"hygrometer",
"fittings",
"fitting"
] | 3D Printers > Accessories | [
"1073278/images/image_1_compressed.jpg",
"1073278/images/image_2_compressed.jpg"
] | [
"1073278/stls/Hygrometer Fitting Body.stl",
"1073278/stls/Hygrometer Fitting Nut.stl"
] | CC-BY | https://www.printables.com/model/1073278 | data_0044.tar | |
87333 | Hygrometer Lid for Malolo's Silica Gel / Desiccant Containers |
<p>This is a remix of the lid for Malolo's Silica Gel / Desiccant Container.</p>
<p><a href="https://www.thingiverse.com/thing:3494496">https://www.thingiverse.com/thing:3494496</a></p>
<p>It has a hole in the top for a circular hygrometer. It should be a fairly snug fit but not so much that it can't be removed.</p>
<... | [
"lid",
"hygrometer",
"thingiverse",
"silicagel",
"silicagelcontainer"
] | 3D Printers > Accessories | [
"87333/images/image_1_compressed.jpg",
"87333/images/image_2_compressed.jpg",
"87333/images/image_3_compressed.jpg"
] | [
"87333/stls/Hygro-Lid.stl"
] | CC-BY | https://www.printables.com/model/87333 | data_0044.tar |
208766 | Hygrometer Mount | <p>I ended up purchasing a Hygrometer for a filament drybox, and there was 5 extras. I figured I could use one inside my 3D printer enclosure to find out how temperatures were while printing. </p><p>I also printed one from my dad's wine cellar to help him check on humidity.</p><p>The model I purchased... | [
"wall",
"mount",
"wine",
"roof",
"celler"
] | 3D Printers > Accessories | [
"208766/images/image_1_compressed.jpg",
"208766/images/image_2_compressed.jpg"
] | [
"208766/stls/HygrometerMount41mm.stl",
"208766/stls/HygrometerMount42mm.stl"
] | CC-BY | https://www.printables.com/model/208766 | data_0044.tar |
102769 | Hygrometer Sunlu S1 Filament Dryer | <p>Just a Hygrometer Holder for the Sunlu S1 Dryer.</p><p> </p> | [
"hygrometermount",
"sunlu",
"sunlufiladryers1"
] | 3D Printers > Other Printer Parts & Upgrades | [
"102769/images/image_1_compressed.jpg",
"102769/images/image_2_compressed.jpg"
] | [
"102769/stls/hygrometer sunlu-v0.1.stl"
] | CC0 | https://www.printables.com/model/102769 | data_0044.tar |
85331 | Hygrometer Thermometer Mount for i3 MK3s | <p>This is a mount for a common humidity/temperature gauge (Available on Amazon <a href="https://www.amazon.com/gp/product/B07YWVN74P/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1)">https://www.amazon.com/gp/product/B07YWVN74P/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1)</a> for MK3s in an enclosure. </p... | [] | 3D Printers > Accessories | [
"85331/images/image_1_compressed.jpg",
"85331/images/image_2_compressed.jpg",
"85331/images/image_3_compressed.jpg",
"85331/images/image_4_compressed.jpg",
"85331/images/image_5_compressed.jpg",
"85331/images/image_6_compressed.jpg"
] | [
"85331/stls/ThermoHolder Post-Mount.stl"
] | CC-BY | https://www.printables.com/model/85331 | data_0044.tar |
85340 | Hygrometer Thermometer Stand/Mount | <p>A stand for a common disk shaped humidity/temperature gauge (Available on Amazon: <a href="https://www.amazon.com/gp/product/B07YWVN74P/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1">https://www.amazon.com/gp/product/B07YWVN74P/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1</a> ).</p><p>The design can be ... | [] | 3D Printers > Accessories | [
"85340/images/image_1_compressed.jpg",
"85340/images/image_2_compressed.jpg"
] | [
"85340/stls/ThermoHolder Floor-Mount.stl",
"85340/stls/thermomolder_stand_qp.stl"
] | CC-BY | https://www.printables.com/model/85340 | data_0044.tar |
169957 | Hygrometer / Thermometer Stand |
<h3>Hygrometer / Thermometer Stand</h3>
<p>This is a simple stand for a common cheap hygrometer / thermometer with a round profile, like this.</p>
<p>Print without supports, in the provided orientation (hole on the bed).</p>
Category: Electronics
| [
"stand",
"hygrometer",
"thingiverse"
] | Hobby & Makers > Electronics | [
"169957/images/image_1_compressed.jpg",
"169957/images/image_2_compressed.jpg"
] | [
"169957/stls/hygrometer_stand.stl"
] | CC0 | https://www.printables.com/model/169957 | data_0044.tar |
24812 | Hyperpixel 4.0 Pi 4 Case With Screen Cover | <p>I remixed superwoodle's excellent pi 4 case <a href="https://www.thingiverse.com/thing:4114747">https://www.thingiverse.com/thing:4114747</a> just to add a protective cover on top for the screen.</p>
<p>The fit is quite tight so put it on gently and make sure the cover and screen are clear of any dust or dirt before... | [
"raspberrypi",
"raspberrypicase",
"rpi",
"raspberrypi4",
"thingiverse",
"raspberrypi4case",
"hyperpixel40",
"hyperpixel4"
] | Hobby & Makers > Electronics | [
"24812/images/image_1_compressed.jpg"
] | [
"24812/stls/hyperpixel-pi4-case-screen-protector.stl",
"24812/stls/hyperpixel-pi4-case.stl"
] | CC-BY | https://www.printables.com/model/24812 | data_0044.tar |
522503 | Hyundai i30N | Polyterra PLA
Layers: 0.15
Support: yes | Download free 3D printable STL models | [
"car",
"hyundai",
"i30n"
] | Hobby & Makers > Automotive | [
"522503/images/image_1_compressed.jpg",
"522503/images/image_2_compressed.jpg"
] | [
"522503/stls/i30n_body.stl",
"522503/stls/i30n_wheels.stl"
] | CC-BY | https://www.printables.com/model/522503 | data_0044.tar |
46689 | Háček | <p>Háček do koupelny.</p>
| [] | Household > Bathroom | [
"46689/images/image_1_compressed.jpg"
] | [
"46689/stls/hacek.stl"
] | CC0 | https://www.printables.com/model/46689 | data_0044.tar |
84901 | Háček do kuchyně | <p><strong>Materiál:</strong> PETG (vhodnější) nebo PLA</p><p><strong>Výplň:</strong> 100%</p><p><strong>Tloušťka vrstvy:</strong> 0,2 mm</p><p><strong>Pokyny k tisku:</strong> Jedná se o drobný díl s relativně malou plochou, může být vhodné přidat límec. Není to nezbytné, háčky na fotografii byly tištěny bez límce.</p... | [
"hacek"
] | Household > Kitchen | [
"84901/images/image_1_compressed.jpg",
"84901/images/image_2_compressed.jpg"
] | [
"84901/stls/hacek.stl"
] | CC0 | https://www.printables.com/model/84901 | data_0044.tar |
344686 | I saw you reading - Bookmark | <p>I made 2 different versions.<br>A simple version (Just print this one part in one color)<br>and the multimaterial version which you can glue together and choose different material for the blade and the handle.</p><p>Edit: Print the handle in an upright position (saw gap down) and add support blocker for the gap and ... | [
"book",
"bookmark",
"lesezeichen"
] | Art & Design > Other Art & Designs | [
"344686/images/image_1_compressed.jpg",
"344686/images/image_2_compressed.jpg",
"344686/images/image_3_compressed.jpg",
"344686/images/image_4_compressed.jpg"
] | [
"344686/stls/Bookmark Saw handle half bottom.stl",
"344686/stls/Bookmark Saw handle half top.stl",
"344686/stls/Bookmark Saw handle.stl",
"344686/stls/Bookmark Saw pin.stl",
"344686/stls/Bookmark Saw saw.stl",
"344686/stls/Bookmark Saw simple.stl"
] | CC-BY | https://www.printables.com/model/344686 | data_0044.tar |
811079 | I-gor (baby beholder) Statue | <p>A 10 eyed beholder. Prints with a flat bottom to mostly avoid rolling and need for supports.</p> | [] | Art & Design > Sculptures | [
"811079/images/image_1_compressed.jpg",
"811079/images/image_2_compressed.jpg",
"811079/images/image_3_compressed.jpg"
] | [
"811079/stls/I-Gor the Beholder-I-Gore-Statue.stl"
] | CC-BY | https://www.printables.com/model/811079 | data_0044.tar |
88689 | i3 MK2.5 to 2.5S Upgrade Printable parts | <p>Original Prusa MK2.5 to 2.5S Upgrade Printable parts.<br>Note this is a legacy download.<br><br>As MK2.5S is one of the upgrades for the older MK2/S printer,<br><strong>other parts not listed</strong> in this print are available as the MK2S parts:<br><a href="https://www.printables.com/model/88231-i3-mk2s-printable-... | [] | 3D Printers > Prusa Parts & Upgrades | [
"88689/images/image_1_compressed.jpg",
"88689/images/image_2_compressed.jpg"
] | [
"88689/stls/adapter-printer.stl",
"88689/stls/cable_holder.stl",
"88689/stls/endstop-block.stl",
"88689/stls/extruder-body.stl",
"88689/stls/extruder-cover.stl",
"88689/stls/extruder-idler.stl",
"88689/stls/extruder-motor-plate.stl",
"88689/stls/fan-shroud.stl",
"88689/stls/fs-cover.stl",
"88689/s... | GPL2.0 | https://www.printables.com/model/88689 | data_0044.tar |
38720 | i3 Spool holder | <p>Modified original spool holder but with two arms for less vibration. The Fusion360 3D model is parametric and can be set for one or two spools.</p>
<h3>Print instructions</h3><p>PETG<br/>
20% infill<br/>
No support</p> | [
"spool",
"holder",
"i3"
] | 3D Printers > Other Printer Parts & Upgrades | [
"38720/images/image_1_compressed.jpg",
"38720/images/image_2_compressed.jpg",
"38720/images/image_3_compressed.jpg",
"38720/images/image_4_compressed.jpg"
] | [
"38720/stls/l-holder.stl",
"38720/stls/r-holder.stl",
"38720/stls/rod-double-200mm.stl",
"38720/stls/rod-single-120mm.stl"
] | CC0 | https://www.printables.com/model/38720 | data_0044.tar |
81928 | IBM Model M - Keys | <p>I found these designs on Github.com and turned them into STL. The SCAD is also included so you can do what you want with it. I have contacted the designer but never got a reply.</p> | [
"cap",
"key",
"keycap",
"keyboard",
"ibm",
"modelm"
] | Household > Office | [
"81928/images/image_1_compressed.jpg"
] | [
"81928/stls/backspace.stl",
"81928/stls/capslock.stl",
"81928/stls/enter.stl",
"81928/stls/key-double.stl",
"81928/stls/key-std.stl",
"81928/stls/keycap-std.stl",
"81928/stls/keycap-wide.stl",
"81928/stls/num-enter.stl",
"81928/stls/shift_wide.stl",
"81928/stls/space.stl"
] | CC0 | https://www.printables.com/model/81928 | data_0044.tar |
562222 | IC DIP lead straightener | <p>The tinker and breadboard friendly dual inline package (DIP) has one slightly annoying feature to it. The factory bend leads don't face straight down, but at an angle that makes inserting them a hassle and usually requires straightening them first. The usual technique is to simply press them on a flat surface, like ... | [
"electronics",
"chip",
"bendingtool"
] | Hobby & Makers > Tools | [
"562222/images/image_1_compressed.jpg",
"562222/images/image_2_compressed.jpg",
"562222/images/image_3_compressed.jpg",
"562222/images/image_4_compressed.jpg",
"562222/images/image_5_compressed.jpg"
] | [
"562222/stls/DIP pin straightener slim.stl"
] | CC-BY | https://www.printables.com/model/562222 | data_0044.tar |
1122602 | IC Storage Tube (No Supports) | <p>Storage tubes for DIP ICs, no supports are needed. The small one can be used to check the quality of the print before printing the larger tubes.</p><p> </p><p>I recommend folding the pins of brand new ICs a tiny bit inwards for a better fit.</p><p> </p> | [
"diy",
"storage",
"electronics",
"tube",
"diyelectronics",
"tubes",
"nosupport",
"electroniccomponents",
"nosupportsneeded",
"nosupports",
"ics",
"integratedcircuit",
"ic",
"nosupportsrequired"
] | Hobby & Makers > Electronics | [
"1122602/images/image_1_compressed.jpg",
"1122602/images/image_2_compressed.jpg",
"1122602/images/image_3_compressed.jpg",
"1122602/images/image_4_compressed.jpg",
"1122602/images/image_5_compressed.jpg"
] | [
"1122602/stls/DIP_IC_Tube_10cm.stl",
"1122602/stls/DIP_IC_Tube_End_Piece.stl",
"1122602/stls/DIP_IC_Tube_Short.stl"
] | CC0 | https://www.printables.com/model/1122602 | data_0044.tar |
837784 | Ice Face Roller | <p>Face roller is a viral skin care device. <br>Great for cooling, healing scratches/acne, massaging etc.<br><br>Design features include: round ice gripping surfaces, overpressure holes, max water level line.</p> | [
"ice",
"face",
"roller",
"care",
"skin"
] | Healthcare > Home Medical Tools | [
"837784/images/image_1_compressed.jpg",
"837784/images/image_2_compressed.jpg",
"837784/images/image_3_compressed.jpg",
"837784/images/image_4_compressed.jpg"
] | [
"837784/stls/Ice_roller_bottom.stl",
"837784/stls/Ice_roller_top.stl"
] | CC-BY | https://www.printables.com/model/837784 | data_0044.tar |
49401 | Ice Fishing Rod Holder | <p>These models are for....</p>
<p>1) an ice rod/scoop holder that can be mounted to something (E.g., sled). I shortened the model after printing the one shown in the picture to save time printing and plastic.</p>
<p>2) an automatic fisherman where a ice fishing rod is mounted in holder and line is set on the trigger (... | [
"fishing",
"fishingrod",
"icefishing",
"fishingrodholder",
"icefishingrod"
] | Sports & Outdoor > Winter Sports | [
"49401/images/image_1_compressed.jpg",
"49401/images/image_2_compressed.jpg",
"49401/images/image_3_compressed.jpg"
] | [
"49401/stls/4rod_holder.stl",
"49401/stls/auto_fish_rod_holder.stl",
"49401/stls/auto_fish_trigger.stl"
] | CC0 | https://www.printables.com/model/49401 | data_0044.tar |
458012 | Ice Roller | <p>My eldest daughter asked me to print an ice roll for facial skin care.</p><p>This isn't really a "roll", but it works great! You just have to fill it with water and place it in the freezer for a few hours.</p><p>After taking it out from the freezer you have to wait until the external layer melts a bit and then it re... | [
"ice",
"roller",
"beauty",
"care",
"skin"
] | Healthcare > Home Medical Tools | [
"458012/images/image_1_compressed.jpg",
"458012/images/image_2_compressed.jpg",
"458012/images/image_3_compressed.jpg",
"458012/images/image_4_compressed.jpg"
] | [
"458012/stls/Ice Roller Base V2.stl",
"458012/stls/Ice Roller Handle V2.stl"
] | CC-BY | https://www.printables.com/model/458012 | data_0044.tar |
296629 | Ice scraper Audi | <p>Made mine in PETG 0.4 nozzle and 0.2 layer hight 6 walls and 25% cubic infill.</p> | [
"ice",
"car",
"winter",
"automotive",
"audi",
"icescraper"
] | Hobby & Makers > Automotive | [
"296629/images/image_1_compressed.jpg"
] | [
"296629/stls/Ice scraper Audi.stl"
] | CC-BY | https://www.printables.com/model/296629 | data_0044.tar |
282682 | Ice scraper Ford | <p>Well I used PETG and that works fine also.</p><p>Print hot and with a lot of walls and it will fork fine.</p> | [
"car",
"winter",
"scraper",
"automotive",
"ford",
"icescraper"
] | Hobby & Makers > Automotive | [
"282682/images/image_1_compressed.jpg",
"282682/images/image_2_compressed.jpg"
] | [
"282682/stls/Ice scraper ford.stl"
] | CC0 | https://www.printables.com/model/282682 | data_0044.tar |
296496 | Ice scraper Hyundai | <p>Made mine in PETG 0.4 nozzle and 0.2 layer hight 6 walls and 25% cubic infill.</p> | [
"ice",
"car",
"winter",
"automotive",
"hyundai",
"icescraper"
] | Hobby & Makers > Automotive | [
"296496/images/image_1_compressed.jpg"
] | [
"296496/stls/Ice scraper Hyundai.stl"
] | CC-BY | https://www.printables.com/model/296496 | data_0044.tar |
1018484 | Ice Skate protector | <p>I made this simple model to protect the sharp edges of my ice skates (designed for BAUER XLS size 8).</p><p>Things used:</p><p>4x M2x6 to attach the 2 sides together.</p><p>2x 20cm rubber band to hold the protector on the skate</p> | [
"ice",
"protector",
"icehockey",
"skate",
"iceskates"
] | Sports & Outdoor > Winter Sports | [
"1018484/images/image_1_compressed.jpg",
"1018484/images/image_2_compressed.jpg"
] | [
"1018484/stls/Kufenschoner_L.stl",
"1018484/stls/Kufenschoner_R.stl"
] | CC-BY | https://www.printables.com/model/1018484 | data_0044.tar |
1165462 | IEM Case (seperate stls) | [
"iemcase"
] | Gadgets > Audio | [
"1165462/images/image_1_compressed.jpg"
] | [
"1165462/stls/CCA-C12 IEM EARPHONE WRAP Case.stl",
"1165462/stls/Storng_Box_Latch.stl",
"1165462/stls/Strong_Box_Base.stl",
"1165462/stls/Strong_Box_Lid.stl"
] | GPL2.0 | https://www.printables.com/model/1165462 | data_0044.tar | |
901472 | IEM Tip Case | <p>I have several IEM ear tip sets, and I was tired of them being stored in separate boxes or just loose. I was also not a fan of the clear plastic divided cases. These work great to separate out different brands or materials, but they are really space-inefficient for ear tips. </p><p>So, I designed my own. It too... | [
"headphone",
"case",
"ear",
"iem",
"eartips",
"eartipcase"
] | Gadgets > Audio | [
"901472/images/image_1_compressed.jpg",
"901472/images/image_2_compressed.jpg",
"901472/images/image_3_compressed.jpg"
] | [
"901472/stls/16 Pairs (Print 2, Don't Mirror).stl",
"901472/stls/22 Pairs (Print 2, Don't Mirror).stl",
"901472/stls/28 Pairs (Print 2, Don't Mirror).stl",
"901472/stls/38 Pairs (Print 2, Don't Mirror).stl",
"901472/stls/54 Pairs (Print 2, Don't Mirror).stl"
] | CC-BY | https://www.printables.com/model/901472 | data_0044.tar |
475297 | iFixit Mako Gridfinity Holder | <p>I was searching for a Gridfinity holder for my iFixit Mako set, but wanted to keep the original case as I like this very much. This design is also very much inspired by <a href="https://www.printables.com/model/424697-ifixit-mako-screwdriver-set-gridfinity-holder">iFixit Mako Screwdriver Set Gridfinity Holder</a> by... | [
"magnet",
"magnets",
"ifixit",
"mako",
"gridfinity",
"ifixitmako"
] | Hobby & Makers > Organizers | [
"475297/images/image_1_compressed.jpg",
"475297/images/image_2_compressed.jpg",
"475297/images/image_3_compressed.jpg"
] | [
"475297/stls/iFixit_Mako_Gridfinity.stl"
] | CC0 | https://www.printables.com/model/475297 | data_0044.tar |
462550 | Ignition cover Minarelli AM6 | <p>Model originally published by Maxoume on Thingiverse.</p><p>No changes have been made.</p> | [
"beta",
"50cc",
"minarelli",
"minarelliam6",
"am6",
"betarr",
"beta50",
"cachedallumage",
"cacheallumage",
"ignitioncover"
] | Hobby & Makers > Automotive | [
"462550/images/image_1_compressed.jpg"
] | [
"462550/stls/Ignition cover AM6.stl"
] | CC-BY | https://www.printables.com/model/462550 | data_0044.tar |
1092270 | Ikea 365+ IHÄRDIG Gewürzglas / Gewürzmühle schraubbarer Trichter | <p>Schraubbarer Trichter zum leichteren Einfüllen von Gewürzen und Kräutern in die sehr beliebten <strong>Ikea 365+ IHÄRDIG Gewürzgläser / Gewürzmühlen.</strong><br><br>Ebenso passt er für nahezu jedes Gewürzglas auf dem Markt, sei es Rewe, Edeka, Penny, Norma, Netto oder Aldi die Gläser haben fast alle ein ident... | [] | Household > Kitchen | [
"1092270/images/image_1_compressed.jpg",
"1092270/images/image_2_compressed.jpg",
"1092270/images/image_3_compressed.jpg"
] | [
"1092270/stls/IHÄRDIG_Trichter.stl"
] | GPL2.0 | https://www.printables.com/model/1092270 | data_0044.tar |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.