model_id stringlengths 1 7 | name stringlengths 2 210 | description stringlengths 0 253k | tags listlengths 0 494 | printables_category stringclasses 80
values | image_paths listlengths 0 289 | stl_paths listlengths 0 2.73k | license stringclasses 7
values | source stringlengths 34 40 | shard_file stringclasses 49
values |
|---|---|---|---|---|---|---|---|---|---|
1316504 | K1/K1C/K1SE CFS Upgrade Orca Slicer Config-Test-v8 | <p>Update 8/9/25- Based on some feedback the starting gcode was not mimicking the original profile from the K1 Max. I changed it and uploaded v8. PLEASE PLEASE PLEASE leave feedback! I want to make sure this is working and not useless to everyone. I cam unable to test this as I do not have a smaller K1 machine. I... | [
"creality",
"orca",
"k1",
"orcaslicer",
"orcaslicerk1",
"k1c",
"cfs",
"k1series",
"k1se",
"cfsupgradekit"
] | 3D Printers > Creality Parts & Upgrades | [
"1316504/images/image_1_compressed.jpg"
] | [
"1316504/stls/K1 CFS Orca v8.stl"
] | CC-BY | https://www.printables.com/model/1316504 | data_0044.tar |
1085302 | K2 Plus poop slide Left and Right | <p>Google Translator: </p><p>I once created a poop slide that you can easily print and that should work with 1-2 magnets (8mmx3mm) and the original screws or with 8 magnets (I haven't tested the pure magnet version yet)! </p><p>The chute cannot be overlooked, but the angle ensures that the poop is ejected suf... | [
"k2",
"poopchute",
"k2plus"
] | 3D Printers > Accessories | [
"1085302/images/image_1_compressed.jpg",
"1085302/images/image_2_compressed.jpg",
"1085302/images/image_3_compressed.jpg",
"1085302/images/image_4_compressed.jpg",
"1085302/images/image_5_compressed.jpg"
] | [
"1085302/stls/poop v7 left and right.stl",
"1085302/stls/poop v7 left.stl",
"1085302/stls/poop v7 right.stl",
"1085302/stls/poop v8 Rechts_.stl"
] | CC-BY | https://www.printables.com/model/1085302 | data_0044.tar |
42137 | Kabeldurchführung - Wire pass through - 68mm | <p>This is a wire pass through for 68mm standard holes that best clips onto 3-4mm MDF / HDF walls in the back of shelfs, but should fit into thicker material as well.</p>
<p>It does not require supports and is best printed in PETG. I also uploaded the FreeCAD files so you could modify the part if you need to.</p>
| [
"cable",
"pass",
"cablemanagement",
"wire",
"thingiverse",
"cableholder",
"cableguide",
"passthrough",
"routing",
"kabelkanal",
"through",
"kabel",
"kabelhalterung",
"68mm",
"dosenbohrer",
"schrankwand"
] | Household > Other House Equipment | [
"42137/images/image_1_compressed.jpg",
"42137/images/image_2_compressed.jpg",
"42137/images/image_3_compressed.jpg",
"42137/images/image_4_compressed.jpg"
] | [
"42137/stls/kabeldurchfuhrung_insert_v3.stl",
"42137/stls/kabeldurchfuhrung_ring_v3.stl"
] | CC-BY | https://www.printables.com/model/42137 | data_0044.tar |
178803 | Kakashi |
<p><a href="https://www.cgtrader.com/body3d">https://www.cgtrader.com/body3d</a></p>
<p><a href="https://www.facebook.com/groups/492474174608397/">https://www.facebook.com/groups/492474174608397/</a></p>
<p>Join Us ! Rejoignez Nous !</p>
<p>Je me lance dans la modélisation ! :)
<a href="https://youtu.be/p3PiFy7EaSs... | [
"fanart",
"art",
"anime",
"manga",
"fan",
"thingiverse",
"naruto",
"sakura",
"uchiwa",
"sasuke",
"shippuden",
"kyubi",
"gaara",
"hatake",
"kakashi"
] | Art & Design > Sculptures | [
"178803/images/image_1_compressed.jpg",
"178803/images/image_2_compressed.jpg",
"178803/images/image_3_compressed.jpg"
] | [
"178803/stls/Kakashi.stl"
] | CC-BY | https://www.printables.com/model/178803 | data_0044.tar |
857837 | Kaküno Clip | <p>Updated to fit a little better</p><p> </p><p>My wife finally got me back in to fountain pens. Chose clear pilot Kaküno as my starter which helps see the level of ink, etc., but they have two issues:</p><ol><li>it was hard to tell blue ink from black</li><li>my wife really disliked lack of a clip</li></ol><p>Sol... | [
"pen",
"clip",
"fountain",
"pilot",
"fountainpen",
"kakuno"
] | Household > Office | [
"857837/images/image_1_compressed.jpg",
"857837/images/image_2_compressed.jpg",
"857837/images/image_3_compressed.jpg"
] | [
"857837/stls/band.stl",
"857837/stls/band_and_clip.stl",
"857837/stls/band_and_clip_dual.stl",
"857837/stls/band_and_clip_dual_no_cut.stl",
"857837/stls/band_dual.stl",
"857837/stls/band_dual_no_cut.stl",
"857837/stls/clip.stl"
] | CC-BY | https://www.printables.com/model/857837 | data_0044.tar |
357105 | Kallax Link | <p>I made this little hook to link my kallax funitures together to cancel the noise of hitting each other.</p><p>You can hide it behind but you need at least 15mm from the wall to fit it!</p><p> </p><p>Printed in Prusament PETG Prusa Orange</p><p>0.3mm layer height</p><p>No support needed</p> | [
"ikea",
"clip",
"link",
"kallax"
] | Household > Other House Equipment | [
"357105/images/image_1_compressed.jpg",
"357105/images/image_2_compressed.jpg",
"357105/images/image_3_compressed.jpg"
] | [
"357105/stls/KallaxLinkV1.stl"
] | CC0 | https://www.printables.com/model/357105 | data_0044.tar |
334851 | Kandi/bead bracelet knot superglue holder | <p>After bringing my beads to various cons and having people make kandi bracelets, I realized I needed a better way to help people superglue the knots so that they don't accidentally have their kandi fall apart. This seems to do the trick.</p><p>Recommended material is <strong>nylon</strong>, because superglue will sti... | [
"holder",
"beads",
"knot",
"superglue",
"bracelets",
"necklaces",
"kandi"
] | Art & Design > Other Art & Designs | [
"334851/images/image_1_compressed.jpg"
] | [
"334851/stls/bead-superglue-holder.stl"
] | GPL2.0 | https://www.printables.com/model/334851 | data_0044.tar |
442941 | Kanji "Peace" Coin | <p>Coin with the Japanese Kanji for "Peace" engraved in it. Uses art from <a href="https://publicdomainvectors.org/en/free-clipart/Kanji-peace-symbol/69160.html">PublicDomainVectors.org</a>.</p> | [
"coin",
"coins",
"freecad",
"peace",
"svg",
"japan",
"kanji",
"kanjicoin",
"publicdomainvectors"
] | Art & Design > 2D Plates & Logos | [
"442941/images/image_1_compressed.jpg",
"442941/images/image_2_compressed.jpg"
] | [
"442941/stls/kanji-peace-coin.stl"
] | CC0 | https://www.printables.com/model/442941 | data_0044.tar |
828031 | Kantenschutz Babboe Curve Mountain Lastenfahrrad / Edge protection Cargo bike Babboe Curve Mountain | <p>→ Kantenschutz Radaufhängung vorne für Babboe Curve Montain Lastenfahrrad / Edge protection for Babboe Curve Montain Cargo bike</p><p>→ 0.4 Nozzle</p><p>→ 0.2 mm Layer Height,</p><p>→ 25% infill,</p><p>→ PLA → breaks in case of strong shocks</p><p>→ TPU → more resistant to external mechanical shocks</p><p>→ Can be m... | [
"cargobike",
"edgeprotection",
"lastenrad",
"kantenschutz"
] | Sports & Outdoor > Outdoor Sports | [
"828031/images/image_1_compressed.jpg",
"828031/images/image_2_compressed.jpg",
"828031/images/image_3_compressed.jpg",
"828031/images/image_4_compressed.jpg",
"828031/images/image_5_compressed.jpg",
"828031/images/image_6_compressed.jpg"
] | [
"828031/stls/babboe_edge.stl"
] | CC0 | https://www.printables.com/model/828031 | data_0044.tar |
419160 | Kapla - Scharnier Hinge | <h3><strong>TL;DR</strong></h3><p><strong>The Hinge connector</strong> for the <a href="https://www.kapla.com/en/">Kapla Planks</a> education system.</p><h3> </h3><h3>update 2024-0117</h3><ul><li>added new hinge version, stronger and easier to print</li></ul><p> </p><figure class="image image_resized" style="... | [
"plank",
"kapla",
"plankjes"
] | Toys & Games > Building Toys | [
"419160/images/image_1_compressed.jpg",
"419160/images/image_10_compressed.jpg",
"419160/images/image_11_compressed.jpg",
"419160/images/image_12_compressed.jpg",
"419160/images/image_13_compressed.jpg",
"419160/images/image_14_compressed.jpg",
"419160/images/image_15_compressed.jpg",
"419160/images/i... | [
"419160/stls/hinge.stl"
] | GPL3.0 | https://www.printables.com/model/419160 | data_0044.tar |
297744 | Kar98k Pen Remix | <p>Remix of FreddyZ's awesome <a href="https://www.printables.com/cs/model/265990-kar98k-bolt-action-ballpoint-pen">Kar98k bolt action ballpoint pen</a></p><p>The original design is done very well and the parts fit together very well. Also an excellent idea!</p><p>The reason for this remix is mainly for strength.... | [
"pen",
"ballpointpen",
"boltactionpen",
"karabiner"
] | Gadgets > Other Gadgets | [
"297744/images/image_1_compressed.jpg",
"297744/images/image_2_compressed.jpg",
"297744/images/image_3_compressed.jpg",
"297744/images/image_4_compressed.jpg"
] | [
"297744/stls/Black_Barrel.stl",
"297744/stls/Black_Butt_Plate.stl",
"297744/stls/Black_Front_Deco.stl",
"297744/stls/Black_Front_Sight.stl",
"297744/stls/Black_Trigger.stl",
"297744/stls/Silver_Bolt.stl",
"297744/stls/Silver_Bolt_Handle.stl",
"297744/stls/Silver_Bolt_Handle_Knob.stl",
"297744/stls/S... | CC-BY | https://www.printables.com/model/297744 | data_0044.tar |
384801 | Karambit knife (2 pieces) | <p>I now als designed the knife in two pieces so dont need as much supports as before</p><p> </p> | [] | Gadgets > Other Gadgets | [
"384801/images/image_1_compressed.jpg",
"384801/images/image_2_compressed.jpg",
"384801/images/image_3_compressed.jpg",
"384801/images/image_4_compressed.jpg"
] | [
"384801/stls/Karambit blade v2.stl",
"384801/stls/Karambit full piece.stl",
"384801/stls/Karambit handle v2.stl"
] | CC0 | https://www.printables.com/model/384801 | data_0044.tar |
187062 | Karambit Styled Utility Knife | <p>Please make <a href="https://www.printables.com/model/265831-karambit-styled-utility-knife-mk4">https://www.printables.com/model/265831-karambit-styled-utility-knife-mk4</a> instead, I have made some improvements to increase safety</p><p> </p><p>I enjoyed the Feel of the Subitus ( <a href="https://www.thingiver... | [
"thingiverse"
] | Hobby & Makers > Other Ideas | [
"187062/images/image_1_compressed.jpg",
"187062/images/image_2_compressed.jpg",
"187062/images/image_3_compressed.jpg",
"187062/images/image_4_compressed.jpg"
] | [
"187062/stls/Blade_Holder.stl",
"187062/stls/handle.2.0.stl"
] | CC-BY | https://www.printables.com/model/187062 | data_0044.tar |
96625 | Karate belt hanger |
<p>Just a simple way of displaying my boys karate belts.<br/>
Larger size belts may need a little large hanger.<br/>
Individual displays that can grow as they get more belts.<br/>
Attached using 3M strips (Command adhesive).</p>
Category: Organization
| [
"display",
"hanger",
"belt",
"thingiverse",
"karate",
"karatebelt"
] | Household > Office | [
"96625/images/image_1_compressed.jpg",
"96625/images/image_2_compressed.jpg",
"96625/images/image_3_compressed.jpg",
"96625/images/image_4_compressed.jpg"
] | [
"96625/stls/Karate_Belt_hanger_1.stl"
] | CC-BY | https://www.printables.com/model/96625 | data_0044.tar |
72457 | Karcher - tube holder | <p>Karcher WD3200 tube holder</p>
<p><a href="https://cad.onshape.com/documents/ee4f0f1007e19508007c2a5f/w/a5a09267e127710a99e71755/e/1d8f0c1767582e68a917438a">https://cad.onshape.com/documents/ee4f0f1007e19508007c2a5f/w/a5a09267e127710a99e71755/e/1d8f0c1767582e68a917438a</a></p>
<h3> Print Settings</h3>
<p><strong>Pri... | [
"vacuum",
"thingiverse",
"wd3"
] | Household > Other House Equipment | [
"72457/images/image_1_compressed.jpg",
"72457/images/image_2_compressed.jpg"
] | [
"72457/stls/Karcher-holder.stl"
] | CC-BY | https://www.printables.com/model/72457 | data_0044.tar |
239765 | Katana carrier backpack for Lucky 13 | <p> Printed with Prusament PETG Jet black.</p><p>Katana sword model: <a href="https://www.printables.com/model/152315-katana-for-lucky-13">Katana for Lucky 13 by kh4rj0 | Download free STL model | Printables.com</a></p> | [
"lucky13"
] | Toys & Games > Action Figures & Statues | [
"239765/images/image_1_compressed.jpg"
] | [
"239765/stls/Katana carrier backpack for Lucky 13.stl"
] | CC-BY | https://www.printables.com/model/239765 | data_0044.tar |
291871 | Katana Dagger Sword Holder | <p>It is a holder for a KATANA, my friend has two. The middle one is 105mm from the base to the circle. The other two is minuss 40mm therefore 65mm, the other is 125mm.</p><p>I used PETG but most polymers are fine.</p><p>Infill: 5%</p><p>5 is plenty, the sword's weight will hold it down.</p><p>Perimeterss 3:3:3</p><p>I... | [
"display",
"holder",
"blade",
"sword",
"dagger",
"showoff"
] | Art & Design > Other Art & Designs | [
"291871/images/image_1_compressed.jpg",
"291871/images/image_2_compressed.jpg",
"291871/images/image_3_compressed.jpg",
"291871/images/image_4_compressed.jpg"
] | [
"291871/stls/Katana_holder+20.stl",
"291871/stls/Katana_holder-40mm.stl",
"291871/stls/Katana_holder.stl"
] | CC-BY | https://www.printables.com/model/291871 | data_0044.tar |
1169325 | Kayoumini 2.5" Travel Case | <p>Print in rigid filament (PLA, PETG etc).</p><p>Total plastic required is ≈140g.</p><h3>Additional hardware required :</h3><ul><li><p><a target="_blank" rel="noopener noreferrer nofollow" class="editor-link" href="https://fr.aliexpress.com/item/1005002886551955.html?spm=a2g0o.productlist.main.3.7d5a1cb3WT7wc1&am... | [
"box",
"case",
"travel",
"frames",
"kayou",
"kayoumini"
] | Hobby & Makers > RC & Robotics | [
"1169325/images/image_1_compressed.jpg",
"1169325/images/image_2_compressed.jpg"
] | [
"1169325/stls/KM_Travel_Case_Body.stl",
"1169325/stls/KM_Travel_Case_Lid.stl"
] | CC-BY | https://www.printables.com/model/1169325 | data_0044.tar |
512179 | Kazoo | It prints without supports. Depending on the bridging capabilities of your printer, you might need to clean up the top p | Download free 3D printable STL models | [
"toy",
"music",
"toys",
"kids",
"musicalinstrument",
"instrument",
"kazoo",
"musicalinstruments"
] | Hobby & Makers > Music | [
"512179/images/image_1_compressed.jpg",
"512179/images/image_2_compressed.jpg",
"512179/images/image_3_compressed.jpg",
"512179/images/image_4_compressed.jpg",
"512179/images/image_5_compressed.jpg"
] | [
"512179/stls/kazooBody.stl",
"512179/stls/kazooLockNut.stl",
"512179/stls/kazooWasher.stl"
] | CC0 | https://www.printables.com/model/512179 | data_0044.tar |
491081 | KC Chiefs Keychain | <p>KC Chiefs Keychain</p>
Category: Keychains | [
"infinity",
"keychain",
"football",
"nfl",
"thingiverse",
"chiefs",
"fantasyfootball",
"mahomes"
] | Fashion > Other Fashion Accessories | [
"491081/images/image_1_compressed.jpg",
"491081/images/image_2_compressed.jpg",
"491081/images/image_3_compressed.jpg"
] | [
"491081/stls/KC_Chiefs_Keychain_v5_v1.stl"
] | CC-BY | https://www.printables.com/model/491081 | data_0044.tar |
326110 | Kel-Tec P17 Magazine Loader | <p>Supports are needed for the center section.</p> | [] | Hobby & Makers > Tools | [
"326110/images/image_1_compressed.jpg",
"326110/images/image_2_compressed.jpg"
] | [
"326110/stls/P17 Magazine Loader - Rounded Edges.stl"
] | CC-BY | https://www.printables.com/model/326110 | data_0044.tar |
496608 | Kenny Mod 2 for the BTT Knomi Display | <p>This is my second iteration of a Stealthburner display mount for the Big Tree Tech Knomi Display.</p><p>The Improvements in this version are:</p><ol><li>Front fixing display frame for very easy removal for maintenance or firmware upgrades. Can be easily removed entirely without any disassembly to the SB.</li><li>350... | [] | 3D Printers > Other Printer Parts & Upgrades | [
"496608/images/image_1_compressed.jpg",
"496608/images/image_2_compressed.jpg",
"496608/images/image_3_compressed.jpg",
"496608/images/image_4_compressed.jpg",
"496608/images/image_5_compressed.jpg",
"496608/images/image_6_compressed.jpg",
"496608/images/image_7_compressed.jpg"
] | [
"496608/stls/Display Collar with Integrated Support V2_1.stl",
"496608/stls/Kenny 2 Mod_ Knomi Display Hoody V1_1.stl",
"496608/stls/Kenny 2 Mod_ Rapido SB UHF _ Main Body.stl",
"496608/stls/Kenny 2 Mod_ Rapido UHF Hot End Mount.stl",
"496608/stls/Kenny 2 Mod_ Stock SB_ Main Body.stl",
"496608/stls/Rapido... | GPL3.0 | https://www.printables.com/model/496608 | data_0044.tar |
15520 | Kerfsetter Mini | <p>My take on the ever popular tool to easily and accurately create rabbet and dados with a table saw, graduations added to each side for the estimated kerf and stock width, should just be used as a guide, this is 3d printing after all.</p>
<p>Designed specifically to print without supports ( You'll probably have to ro... | [
"tablesaw",
"jigs",
"thingiverse",
"kerfmaker"
] | Hobby & Makers > Tools | [
"15520/images/image_1_compressed.jpg",
"15520/images/image_2_compressed.jpg",
"15520/images/image_3_compressed.jpg",
"15520/images/image_4_compressed.jpg",
"15520/images/image_5_compressed.jpg",
"15520/images/image_6_compressed.jpg",
"15520/images/image_7_compressed.jpg",
"15520/images/image_8_compres... | [
"15520/stls/base.stl",
"15520/stls/bottom_pin.stl",
"15520/stls/kerf_slider.stl",
"15520/stls/knob.stl",
"15520/stls/thickness_slider.stl",
"15520/stls/top_pin.stl"
] | CC-BY | https://www.printables.com/model/15520 | data_0044.tar |
346463 | Ketchup Sachet Holder | A neat and tidy way to store all my takeaway ketchup sachets for use later | Download free 3D printable STL models | [
"kitchen",
"organizer",
"pizza",
"ketchup",
"sachet",
"mcdonalds",
"fastfood",
"dominos",
"kfc",
"wendys",
"pizzahut"
] | Household > Kitchen | [
"346463/images/image_1_compressed.jpg"
] | [
"346463/stls/packet_holder_01.stl"
] | CC-BY | https://www.printables.com/model/346463 | data_0044.tar |
388572 | KevinAKASam KlackEnder v2.1 For Micro Swiss NG Extruder | <p>I recently installed the awesome KlackEnder mod on my Ender 3 V2. The stock dock and mount needed to be revised to work with the different size tabs that are on the Micro Swiss NG backplate. </p><p>The original probe block and retainer are fine. Figured I would upload this for those that do not feel comfortable... | [
"microswiss",
"ng",
"klicky",
"kevinakasam",
"klickyprobe",
"klackender",
"ngextruder"
] | 3D Printers > Creality Parts & Upgrades | [
"388572/images/image_1_compressed.jpg",
"388572/images/image_2_compressed.jpg",
"388572/images/image_3_compressed.jpg"
] | [
"388572/stls/Probe_Dock NG.stl",
"388572/stls/Probe_Mount NG.stl"
] | GPL3.0 | https://www.printables.com/model/388572 | data_0044.tar |
562385 | Key Holder for Honeycomb Storage Wall | <p>This Keyholder attaches easily to a standard Keyring and slides into the Honeycomb of the storage wall. The dimensions are snug, but you don't need much force tu pull out your key. The holder has rounded corners for ease of insertion.<br><br>The hexagons are reasonably stylish and small enough, so that they don't an... | [
"keyholder",
"honeycomb",
"key",
"honeycombstoragewall",
"honeycombwall",
"hsw"
] | Hobby & Makers > Organizers | [
"562385/images/image_1_compressed.jpg",
"562385/images/image_2_compressed.jpg",
"562385/images/image_3_compressed.jpg",
"562385/images/image_4_compressed.jpg"
] | [
"562385/stls/Honeycomb Key holder horizontal.stl",
"562385/stls/Honeycomb Key holder Vertical.stl"
] | CC-BY | https://www.printables.com/model/562385 | data_0044.tar |
820553 | Key Hooks, no screw holes | <p>I really liked the “simple modern key hook" model by <a href="/@shanehoggatt_1491713">shanehoggatt</a> but couldn't screw into the wall so I made this simple remix that removes the keyhole and adds a cavity in the rear for a nice tidy look when you install with double-sided tape or command strips.</p><p>For best str... | [
"hook",
"keyholder",
"key",
"garage",
"keys",
"remix",
"hall",
"keyhook",
"hallway",
"hookhookyhookhook"
] | Household > Other House Equipment | [
"820553/images/image_1_compressed.jpg",
"820553/images/image_2_compressed.jpg"
] | [
"820553/stls/key_hooks.stl"
] | CC-BY | https://www.printables.com/model/820553 | data_0044.tar |
919953 | Key Ring Fast Lock | [
"ring",
"lock",
"keychain",
"key",
"keyring"
] | Gadgets > Other Gadgets | [
"919953/images/image_1_compressed.jpg",
"919953/images/image_2_compressed.jpg"
] | [
"919953/stls/lock.stl",
"919953/stls/ring.stl",
"919953/stls/ring2.stl"
] | CC0 | https://www.printables.com/model/919953 | data_0044.tar | |
1229521 | Keyboard or Mouse Wrist Rest - Glorious Model O Skates | <p>Print with variable layer height for best results</p> | [
"mouse",
"keyboard",
"wristrest"
] | Gadgets > Computers | [
"1229521/images/image_1_compressed.jpg",
"1229521/images/image_2_compressed.jpg"
] | [] | CC-BY | https://www.printables.com/model/1229521 | data_0044.tar |
56715 | Keyboard Wrist Rest | <p>A wrist rest made for my Ducky 100% keyboard. STEP files are included for tweaking the size to your specifications. Made on a CNC router with reclaimed wood.</p><p>Finished it by sanding it and applying tung oil.</p> | [
"wood",
"keyboard",
"wrist",
"mechanicalkeyboard",
"thingiverse",
"cncrouter",
"wristrest"
] | Household > Office | [
"56715/images/image_1_compressed.jpg",
"56715/images/image_2_compressed.jpg",
"56715/images/image_3_compressed.jpg",
"56715/images/image_4_compressed.jpg",
"56715/images/image_5_compressed.jpg"
] | [
"56715/stls/wristrest.stl",
"56715/stls/wristrest_closed.stl"
] | CC-BY | https://www.printables.com/model/56715 | data_0044.tar |
124267 | Keyboard Wrist Rest (YMDK75% split) - Hexagon Pattern |
<p>A remix from doubleomarty nice looking wrist rest. It does not properly fit my YMDK split 75% keyboard so I have to make some adjustments.</p>
<p>Original file <a href="https://www.thingiverse.com/thing:4787470">https://www.thingiverse.com/thing:4787470</a><br/>
The Keyboard <a href="https://www.aliexpress.com/i... | [
"keyboard",
"mechanicalkeyboard",
"thingiverse",
"wristrest",
"splitkeyboard",
"keyboardaccessory",
"keyboardaddon",
"keyboardwristrest"
] | Gadgets > Computers | [
"124267/images/image_1_compressed.jpg",
"124267/images/image_2_compressed.jpg"
] | [
"124267/stls/Wrist_Rest_Split75_-_Left.stl",
"124267/stls/Wrist_Rest_Split75_-_Right.stl"
] | CC-BY | https://www.printables.com/model/124267 | data_0044.tar |
416828 | keychain Creeper minecraft | <p>Portachiavi Creeper Minecraft stampabile in mono colore o con cambio filamento per un effetto migliore</p> | [
"minecraft"
] | Gadgets > Video Games | [
"416828/images/image_1_compressed.jpg",
"416828/images/image_2_compressed.jpg"
] | [
"416828/stls/muso.stl"
] | CC-BY | https://www.printables.com/model/416828 | data_0044.tar |
965130 | Keychain deadPool | <h3><strong>Description</strong></h3><p>Transform your keys with the unique and bold style of the Merc with a Mouth with this incredible Deadpool 3D keychain. Meticulously designed to capture the essence of everyone's favorite antihero, this keychain is perfect for fans of the Marvel universe and lovers of geeky access... | [
"deadpool",
"keychain",
"key",
"llavero"
] | 3D Printers > Accessories | [
"965130/images/image_1_compressed.jpg",
"965130/images/image_2_compressed.jpg"
] | [
"965130/stls/KeyKeyDeadPoolV2.stl"
] | GPL3.0 | https://www.printables.com/model/965130 | data_0044.tar |
881643 | KeyChain DNA | <p>Make sure size matches you</p> | [
"keychain",
"dna"
] | Art & Design > Other Art & Designs | [
"881643/images/image_1_compressed.jpg"
] | [
"881643/stls/DNA.stl"
] | CC0 | https://www.printables.com/model/881643 | data_0044.tar |
197783 | Keychain for Westfalia detachable towbar key |
<p>Since the key for the Westfalia detachable towbar can't be hang on a keychain this ring will do the job.</p>
<h3>Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Deltaprintr</p>
<p class="detail-setting printer"><strong>Printer: </strong>
<div><p>Deltaprintr Kit</p></div>
<p><strong>Rafts:</strong></... | [
"keychain",
"key",
"thingiverse",
"towbar",
"westfalia"
] | Hobby & Makers > Automotive | [
"197783/images/image_1_compressed.jpg",
"197783/images/image_2_compressed.jpg",
"197783/images/image_3_compressed.jpg"
] | [
"197783/stls/Westfalia_Key_Chain3.stl"
] | CC-BY | https://www.printables.com/model/197783 | data_0044.tar |
431212 | Keychain Hardcore | <p>Keychain Hardcore.</p><p>For all the enjoyers of the harder styles (hardstyle, frenchcore, hardcore, uptempo, terror, and mutch more)</p><p> </p><p>If anyone has any questions please contact me,</p><p>THop3D</p> | [
"keychains"
] | Gadgets > Other Gadgets | [
"431212/images/image_1_compressed.jpg"
] | [
"431212/stls/Keychain Hardcore.stl"
] | CC-BY | https://www.printables.com/model/431212 | data_0044.tar |
104205 | Keychain HC Sparta 2 color | <p>Muzete tisknout jednobarevne nebo pouzit vymenu barev a tisknout dvoubarevne.</p> | [
"keychain",
"icehockey",
"hockeyclub"
] | Sports & Outdoor > Winter Sports | [
"104205/images/image_1_compressed.jpg"
] | [
"104205/stls/keychain_hc_sparta.stl"
] | GPL2.0 | https://www.printables.com/model/104205 | data_0044.tar |
447978 | Keychain Multicolor Pokemon | <p>COMO IMPRIMIR EN VARIOS COLORES CON UN SOLO FUSOR</p><p>HOW TO PRINT MULTICOLOR WITH ONLY ONE HOTEND</p><figure class="media"><oembed url="https://www.youtube.com/watch?v=r-oeuuIE2TA"></oembed></figure><p>Category: Keychains</p> | [
"pokemon",
"pokeball",
"keychain",
"key",
"llavero",
"thingiverse"
] | Fashion > Other Fashion Accessories | [
"447978/images/image_1_compressed.jpg",
"447978/images/image_2_compressed.jpg"
] | [
"447978/stls/Color_1.stl",
"447978/stls/Color_2.1.stl",
"447978/stls/Color_3.1.stl",
"447978/stls/Color_3.2.stl",
"447978/stls/tower.stl"
] | CC-BY | https://www.printables.com/model/447978 | data_0044.tar |
827227 | keychain night fury | <p>keychain night fury</p> | [] | Art & Design > 2D Plates & Logos | [
"827227/images/image_1_compressed.jpg"
] | [
"827227/stls/BAMGUELA.stl"
] | CC0 | https://www.printables.com/model/827227 | data_0044.tar |
473426 | Keychain numbers 0-10 | <p>I needed to have numbered keys , they all looked alike so need a way to distinguish them. I have them numbered the same way I have locations on map.
<a href="https://www.youtube.com/watch?v=4gMrWa4Y6eo">https://www.youtube.com/watch?v=4gMrWa4Y6eo</a></p>
<p>want more ? here are numberes from 11 to 21: <a href="http... | [
"keychain",
"keyring",
"thingiverse",
"numbers",
"keychains",
"number"
] | Household > Office | [
"473426/images/image_1_compressed.jpg",
"473426/images/image_10_compressed.jpg",
"473426/images/image_11_compressed.jpg",
"473426/images/image_12_compressed.jpg",
"473426/images/image_13_compressed.jpg",
"473426/images/image_14_compressed.jpg",
"473426/images/image_15_compressed.jpg",
"473426/images/i... | [
"473426/stls/Key_tags_1-10.stl",
"473426/stls/Key_tag_0.stl",
"473426/stls/Key_tag_1.stl",
"473426/stls/Key_tag_10.stl",
"473426/stls/Key_tag_2.stl",
"473426/stls/Key_tag_3.stl",
"473426/stls/Key_tag_4.stl",
"473426/stls/Key_tag_5.stl",
"473426/stls/Key_tag_6.stl",
"473426/stls/Key_tag_7.stl",
"... | CC-BY | https://www.printables.com/model/473426 | data_0044.tar |
237230 | Keychain Pill Box | <p>The model is available in 4 variants: combinations of friction/flap latch and pop/pin hinge. The pin hinge models require a hinge pin made from a length of 1.75mm filament. The pop hinge models just snap together.</p><p>Each box has the capacity to hold 2 large pills or capsules.</p> | [
"pillbox",
"pillcontainer"
] | Healthcare > Home Medical Tools | [
"237230/images/image_1_compressed.jpg",
"237230/images/image_2_compressed.jpg"
] | [
"237230/stls/PillBox1.stl",
"237230/stls/PillBox2.stl",
"237230/stls/PillBox3.stl",
"237230/stls/PillBox4.stl"
] | CC0 | https://www.printables.com/model/237230 | data_0044.tar |
216608 | Keychain Puzzle |
<p>A simple keychain.</p>
<h3>Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Anycubic</p>
<p class="detail-setting printer"><strong>Printer: </strong>
<div><p>All-metal Mega</p></div>
<p><strong>Rafts:</strong></p>
<p>No</p>
<p class="detail-setting supports"><strong>Supports: </strong>
<div><p>Yes</p... | [
"puzzle",
"keychain",
"thingiverse"
] | Fashion > Other Fashion Accessories | [
"216608/images/image_1_compressed.jpg"
] | [
"216608/stls/puzzle.stl"
] | CC-BY | https://www.printables.com/model/216608 | data_0044.tar |
131058 | Keychron K1 Clip-on Feet | <p>Simple clip-on keyboard feet for the Keychron K1. It raises the back 13mm off the table surface. It's thin enough to fit between the two switches above the F1 keys. There's also a tab on the back to allow easier removal, since you can't slide it off due to the existing small rubber feet.</p><p>I used PLA but I would... | [
"feet",
"foot",
"keyboard",
"mechanicalkeyboard",
"riser",
"keychron",
"keyboardfoot",
"keyboardfeet",
"keychronk1",
"keyboardriser"
] | Household > Office | [
"131058/images/image_1_compressed.jpg",
"131058/images/image_2_compressed.jpg",
"131058/images/image_3_compressed.jpg"
] | [
"131058/stls/Keychron K1 Keyboard Foot.stl"
] | CC-BY | https://www.printables.com/model/131058 | data_0044.tar |
1296213 | Keychron K2 HE Special Edition - wooden frame replacement | <p>I have recreated side frames for Keychron K2 HE Special Edition keyboard basing on wooden ones that came with keyboard. Made it mainly to change keyboard look, as I have replaced stock keycaps and got an idea that it will look great with marble accents. I have printed it using Prusament PLA Marble Grey and polished ... | [
"keyboard",
"mechanicalkeyboard",
"keychron"
] | Hobby & Makers > Electronics | [
"1296213/images/image_1_compressed.jpg",
"1296213/images/image_2_compressed.jpg",
"1296213/images/image_3_compressed.jpg"
] | [
"1296213/stls/LeftFrame.stl",
"1296213/stls/RightFrame.stl"
] | CC-BY | https://www.printables.com/model/1296213 | data_0044.tar |
1003904 | Keychron Q6 Feet | <p>The Keychron Q6 does not have integrated feets to angle the keyboard.<br>This model solves it.</p><p>Print 2 of it, one for each side.</p><p>The angle is 6.4 degree, meaning the back is raised about 1 cm.</p><p>This model was inspired by this model:<br>https://www.printables.com/model/644670-keychron-q6-pro-keyboard... | [
"stand",
"feet",
"keychron",
"q6"
] | Gadgets > Computers | [
"1003904/images/image_1_compressed.jpg",
"1003904/images/image_2_compressed.jpg",
"1003904/images/image_3_compressed.jpg"
] | [
"1003904/stls/Keychron Q6 Feet.stl"
] | CC-BY | https://www.printables.com/model/1003904 | data_0044.tar |
149044 | Keyhole Pegboard Hanger |
<p>I designed this because I wanted to get my Ryobi chargers off the workbench and hang them on my wall instead. Didn't want to go to the store, or wait for a delivery and I couldn't find one already made...</p>
<p>It should work to hang any keyhole slot things on 1" on center pegboard with 1/4" holes.</p>
<h3>Print... | [
"pegboard",
"thingiverse",
"keyholehangerplate",
"keyholehook"
] | Household > Office | [
"149044/images/image_1_compressed.jpg",
"149044/images/image_2_compressed.jpg",
"149044/images/image_3_compressed.jpg",
"149044/images/image_4_compressed.jpg"
] | [
"149044/stls/pegboard_keyhole_peg.stl"
] | CC-BY | https://www.printables.com/model/149044 | data_0044.tar |
897134 | Keyrambit Shuriken MODE | <p><strong>Shuriken (ShuriKEY):</strong></p><p> </p><p>The Shuriken has a hole made for a key ring and a 6803 ZZ 17x26x5 bearing.</p><p>This project was supposed to be different from all keyspinners, it's fun to spin when you have several keys. Perfect to de-stress.</p><p><strong>Berings:</strong></p><ul><li>Alleg... | [
"fidget",
"fidgetspinner",
"6803",
"keyrambit",
"keyspinner"
] | Costumes & Accessories > Other Costume Accessories | [
"897134/images/image_1_compressed.jpg"
] | [
"897134/stls/Shuriken.stl"
] | CC-BY | https://www.printables.com/model/897134 | data_0044.tar |
187565 | Keystone Rj45 Jack |
<p>This is an add in RJ45 keystone connector for drop-in use inside an enclosure. It should however be printed at a slant so that the the overhangs will print properly and then no supports are required on the inside of the connector.</p>
<p>In your slicer turn it up on a corner with supports (touching build plate su... | [
"rj45",
"thingiverse",
"keystonejack",
"cat5",
"cat6",
"rj45keystoneadapter"
] | Hobby & Makers > Electronics | [
"187565/images/image_1_compressed.jpg",
"187565/images/image_2_compressed.jpg",
"187565/images/image_3_compressed.jpg",
"187565/images/image_4_compressed.jpg",
"187565/images/image_5_compressed.jpg",
"187565/images/image_6_compressed.jpg",
"187565/images/image_7_compressed.jpg"
] | [
"187565/stls/KeyStone_less_space_v6.stl",
"187565/stls/KeyStone_more_space_v5.stl",
"187565/stls/KeyStone_v7_best_fit_so_far.stl"
] | CC-BY | https://www.printables.com/model/187565 | data_0044.tar |
558552 | Kid Stamps Holder | Holder for Kid stamps | Download free 3D printable STL models | [
"kids",
"stamp"
] | Hobby & Makers > Organizers | [
"558552/images/image_1_compressed.jpg",
"558552/images/image_2_compressed.jpg"
] | [
"558552/stls/Kid_Stamps_Holder.stl"
] | CC-BY | https://www.printables.com/model/558552 | data_0044.tar |
478323 | Kids Bike Basket | <p>You can add name on front side directly in slicer. <br><br>Attach using 6 screws/nuts.</p> | [
"bike",
"basket"
] | Sports & Outdoor > Outdoor Sports | [
"478323/images/image_1_compressed.jpg",
"478323/images/image_2_compressed.jpg"
] | [
"478323/stls/basket.stl",
"478323/stls/holder-bottom-bart.stl",
"478323/stls/holder-upper-part.stl"
] | CC-BY | https://www.printables.com/model/478323 | data_0044.tar |
957986 | kids SHARK fin | [
"swimming",
"shark",
"fin"
] | Toys & Games > Outdoor Toys | [
"957986/images/image_1_compressed.jpg",
"957986/images/image_2_compressed.jpg",
"957986/images/image_3_compressed.jpg",
"957986/images/image_4_compressed.jpg",
"957986/images/image_5_compressed.jpg"
] | [
"957986/stls/SHARK_FIN_KIDS.stl"
] | CC-BY | https://www.printables.com/model/957986 | data_0044.tar | |
266407 | Kikkoman soy sauce bottle cap (flexible) |
<p>Kikkoman sells pretty good soy sauce, unfortunately the've forgotten to design a lid for their bottle.</p>
<p>Not very hygienic, i've seen little fruit flies in some bottles of mine before:-(</p>
<p>That's why i design a cap for it, enjoy!</p>
<p>Beware that this design only fits properlywhen printed with flexibl... | [
"bottle",
"cap",
"flexible",
"thingiverse",
"ninjaflex",
"sauce",
"tpc",
"soy",
"soja",
"kikkoman"
] | Household > Kitchen | [
"266407/images/image_1_compressed.jpg",
"266407/images/image_2_compressed.jpg",
"266407/images/image_3_compressed.jpg"
] | [
"266407/stls/sojacap.stl"
] | CC-BY | https://www.printables.com/model/266407 | data_0044.tar |
210712 | Kill Team 2021 - Measurement Gauge | [
"warhammer40k",
"measurementtool",
"killteam",
"killteam2021"
] | Toys & Games > Other Toys & Games | [
"210712/images/image_1_compressed.jpg",
"210712/images/image_2_compressed.jpg"
] | [
"210712/stls/kt2e-gauge.stl"
] | CC-BY | https://www.printables.com/model/210712 | data_0044.tar | |
583891 | Kill Team Measuring Gauge | <p>I liked the design of this measuring gauge but I wanted the numbers instead of the symbols. It's lightweight, flexible, and lets you see the models under it. I printed this for my Rangers of Shadow Deep games, but the original design was for Warhammer.</p><p>Remixed from: https://www.thingiverse.com/thing:4918545</p... | [
"tabletop",
"measure",
"warhammer",
"ruler"
] | Tabletop Miniatures > Props & Terrains | [
"583891/images/image_1_compressed.jpg"
] | [
"583891/stls/Kill Ruler.stl"
] | CC-BY | https://www.printables.com/model/583891 | data_0044.tar |
158343 | Kindred Wolf Mask remix |
<p>This is a remix of the kindred Wolf mask from <a href="https://www.thingiverse.com/thing:2782037">https://www.thingiverse.com/thing:2782037</a>. I wanted a mask instead of a pendant, so I resized it, Booleaned out the middle and did a little smoothing. should print with minimal supports on most printers.</p>
Ca... | [
"thingiverse",
"lol",
"kindred"
] | Costumes & Accessories > Props | [
"158343/images/image_1_compressed.jpg"
] | [
"158343/stls/Kindred_Wolf_Mask_Remix.stl"
] | CC-BY | https://www.printables.com/model/158343 | data_0044.tar |
166844 | Kinect 360 bracket for TV |
<p>Bracket for mounting a Kinect for an Xbox 360 on top of a flatscreen TV.</p>
<p>Print two, mirrored.</p>
Category: Video Games
| [
"thingiverse",
"kinect"
] | Gadgets > Other Gadgets | [
"166844/images/image_1_compressed.jpg",
"166844/images/image_2_compressed.jpg"
] | [
"166844/stls/kinectholder.stl"
] | CC-BY | https://www.printables.com/model/166844 | data_0044.tar |
2524 | King Kong and Building | <p>King Kong Climbing Building and being angry for no apparent reason.</p>
<h3>Print instructions</h3><p>printed in two parts just in case the needle fails you don't have to waste time doing the entire print again. Needle top prints as is, the Building with Kong will need supports generated.</p> | [
"monster",
"king",
"kong",
"kingkong"
] | World & Scans > Animals | [
"2524/images/image_1_compressed.jpg",
"2524/images/image_2_compressed.jpg",
"2524/images/image_3_compressed.jpg",
"2524/images/image_4_compressed.jpg",
"2524/images/image_5_compressed.jpg"
] | [
"2524/stls/kong_building.stl",
"2524/stls/kong_tower.stl"
] | CC-BY | https://www.printables.com/model/2524 | data_0044.tar |
288580 | KiNG Uni-T Shroud Universal Hotend Shroud | <p>With permission from Mike King to post it here. All files and descriptions are from Mike's Thingiverse post.<br><br>My Uni-T universal cooling shroud for most printers that take a MK8 style hotend like the Ender, CR10, Aquila, <a href="https://www.amazon.com/SUNLU-Filament-1-75mm-Printer-Black/dp/B07Q82HVTT?dchild=1... | [
"mk8",
"crealityender3",
"crealityender5",
"sunlu",
"crealityender3v2",
"voxelabaquila"
] | 3D Printers > Other Printer Parts & Upgrades | [
"288580/images/image_1_compressed.jpg",
"288580/images/image_10_compressed.jpg",
"288580/images/image_11_compressed.jpg",
"288580/images/image_12_compressed.jpg",
"288580/images/image_13_compressed.jpg",
"288580/images/image_14_compressed.jpg",
"288580/images/image_15_compressed.jpg",
"288580/images/i... | [
"288580/stls/4mm_MK8_ABL_Spacer.stl",
"288580/stls/6mm_Sunlu_ABL_Spacer.stl",
"288580/stls/ABL_mount.stl",
"288580/stls/EZABL_Mount.stl",
"288580/stls/EZABL_Retainer.stl",
"288580/stls/EZABL_Size_Adapter.stl",
"288580/stls/MK8_4010_Duct.stl",
"288580/stls/MK8_4020_Duct.stl",
"288580/stls/MK8_5015_Du... | CC-BY | https://www.printables.com/model/288580 | data_0044.tar |
1204421 | KingdomCome: Deliverance2 searching rabbit | <p>Pro všechny milovníky KCD2 jsem vytvořil model králíka, kterého pravděpodobně znáte ze hry.<br>Pokud byste chtěli model zmenšit, doporučuji tisknout jej s 0,2mm tryskou, ale nemusíte nutně.</p><p>----------------------------------------------------------------------------------------------------------------</p><p>Fo... | [
"rabbit",
"miniature",
"keychain",
"badge",
"kingdomcome",
"kcd",
"kcd2",
"kingdomcomedeliverance"
] | Gadgets > Video Games | [
"1204421/images/image_1_compressed.jpg",
"1204421/images/image_2_compressed.jpg",
"1204421/images/image_3_compressed.jpg"
] | [
"1204421/stls/KCD2 rabbit - keychain.stl",
"1204421/stls/KCD2 rabbit AMS.stl",
"1204421/stls/KCD2 rabbit.stl"
] | CC0 | https://www.printables.com/model/1204421 | data_0044.tar |
272113 | kingroon base (simple) | <p>This is my simple base upgrade for the Kingroon Kp3s. it uses all original hardware. no need to add any parts. It prints in 4 pieces with no supports needed. enjoy!</p>
<h3>Print Settings</h3>
<p><strong>Printer:</strong></p>
<p>KP3S</p>
<p class="detail-setting rafts"><strong>Rafts: </strong>
<div><p>No</p></div>
<... | [
"base",
"thingiverse",
"simple",
"kingroon",
"kingroonkp3s",
"kingroonkp3",
"upgradekingroonkp3"
] | 3D Printers > Other Printer Parts & Upgrades | [
"272113/images/image_1_compressed.jpg",
"272113/images/image_10_compressed.jpg",
"272113/images/image_2_compressed.jpg",
"272113/images/image_3_compressed.jpg",
"272113/images/image_4_compressed.jpg",
"272113/images/image_5_compressed.jpg",
"272113/images/image_6_compressed.jpg",
"272113/images/image_... | [
"272113/stls/1.stl",
"272113/stls/2.stl",
"272113/stls/3.stl",
"272113/stls/4.stl",
"272113/stls/joiner.stl"
] | CC-BY | https://www.printables.com/model/272113 | data_0044.tar |
604369 | Kingroon KPL1 mods | <p>Kingroon KPL1 mods</p> | [
"kingroon",
"klp1",
"kingroonklp1"
] | 3D Printers > Other Printer Parts & Upgrades | [
"604369/images/image_1_compressed.jpg"
] | [
"604369/stls/Filament feeder - Part 1.stl",
"604369/stls/Top Door Stop - Part 1.stl"
] | CC-BY | https://www.printables.com/model/604369 | data_0044.tar |
242271 | Kingsong S22 Calf Saver | <p>Thingiverse import! I don't own any of this. Designed by <a href="https://www.thingiverse.com/natewaddoups">Nate Waddoups</a><br><a href="https://www.thingiverse.com/thing:5426967">https://www.thingiverse.com/thing:5426967</a> <br><br>"The top of the King Song S22 chassis ends with a sharp 90 degree angle, whic... | [
"kingsong",
"s22",
"euc",
"electricunicycle"
] | Hobby & Makers > Other Ideas | [
"242271/images/image_1_compressed.jpg",
"242271/images/image_2_compressed.jpg"
] | [
"242271/stls/S22_Calf_Saver_Pair.stl"
] | CC-BY | https://www.printables.com/model/242271 | data_0044.tar |
820444 | Kingston FCR-HS4 Underdesk Holder with countersunk screw holes | <p>A remix of <a href="https://www.printables.com/@stzoran1_104604">@stzoran1_104604</a>'s under desk mount for the Kingston FCR-HS4 multi card media reader that now includes a couple of countersunk screw holes. I used 4G x 12mm screws to attach. Please refer to the pictures. </p> | [] | Gadgets > Computers | [
"820444/images/image_1_compressed.jpg",
"820444/images/image_2_compressed.jpg",
"820444/images/image_3_compressed.jpg",
"820444/images/image_4_compressed.jpg",
"820444/images/image_5_compressed.jpg",
"820444/images/image_6_compressed.jpg",
"820444/images/image_7_compressed.jpg"
] | [
"820444/stls/kingston-fcr-hs4-undertable-holder-v6-countersunk v1.stl"
] | CC-BY | https://www.printables.com/model/820444 | data_0044.tar |
928804 | Kirbo | The Derpy Little Kirby Figure | [
"meme"
] | Toys & Games > Action Figures & Statues | [
"928804/images/image_1_compressed.jpg",
"928804/images/image_2_compressed.jpg",
"928804/images/image_3_compressed.jpg",
"928804/images/image_4_compressed.jpg"
] | [
"928804/stls/Kirbo.stl"
] | CC-BY | https://www.printables.com/model/928804 | data_0044.tar | |
881199 | Kirby Cookie Cutter Set | <p>Kirby Cookie Cutter Set</p><p>The cookie cutter is around 75mm</p><p>Its a 2 piece item, one for cutting the cookie dough and one for modeling .</p><p>Print with 100% infill</p><p>If you have any idea/request let me know :D</p> | [
"kitchen",
"nintendo",
"videogame",
"cutter",
"house",
"cookiecutters",
"kirby"
] | Household > Kitchen | [
"881199/images/image_1_compressed.jpg",
"881199/images/image_2_compressed.jpg",
"881199/images/image_3_compressed.jpg",
"881199/images/image_4_compressed.jpg",
"881199/images/image_5_compressed.jpg"
] | [
"881199/stls/Kirby1 (1).stl",
"881199/stls/Kirby1 (2).stl",
"881199/stls/Kirby1 (3).stl",
"881199/stls/Kirby1 (4).stl",
"881199/stls/Kirby1 (5).stl",
"881199/stls/Kirby1 (6).stl",
"881199/stls/Kirby1 (7).stl",
"881199/stls/Kirby1 (8).stl"
] | CC-BY | https://www.printables.com/model/881199 | data_0044.tar |
817867 | Kirk Hammett Signature Pick | <p><strong>Kirk Hammett Jim Dunlop Signature Pick</strong><br><br>One of six-pack jim dunlop kirk hammett exclusive signed signature pick with it's unique shape.<br><br>I created both 0.8 and 1mm thickness, print which you are comfortable with.</p> | [
"guitar",
"pick",
"metallica",
"kirk",
"hammett"
] | Gadgets > Audio | [
"817867/images/image_1_compressed.jpg",
"817867/images/image_2_compressed.jpg",
"817867/images/image_3_compressed.jpg"
] | [
"817867/stls/kirk_hammett_pick_0.8mm.stl",
"817867/stls/kirk_hammett_pick_1mm.stl"
] | CC-BY | https://www.printables.com/model/817867 | data_0044.tar |
385530 | Kirkland Baby Wipes Holder - Wall Mount | <p>Quick remix to fit the larger Kirkland baby wipes. Mount with a few strips of double sided tape</p><p>Category: Organization</p> | [
"thingiverse"
] | Household > Office | [
"385530/images/image_1_compressed.jpg",
"385530/images/image_2_compressed.jpg"
] | [
"385530/stls/Holder.stl"
] | CC-BY | https://www.printables.com/model/385530 | data_0044.tar |
291979 | Kitchen Blender | <p>This is a remix of my <a href="https://www.printables.com/model/278844-rotating-machine">rotating machine</a>. All tools from that model are compatible with this one.</p><p><strong>Hardware you need:</strong></p><ul><li>10 M3 X 25 mm bolts & nuts</li><li>4 X skate roller bearing (608 size)</li></ul><figure class... | [
"kitchen",
"blender",
"kitchentool",
"kitchenutensils",
"kitchengadget"
] | Household > Kitchen | [
"291979/images/image_1_compressed.jpg",
"291979/images/image_2_compressed.jpg",
"291979/images/image_3_compressed.jpg",
"291979/images/image_4_compressed.jpg",
"291979/images/image_5_compressed.jpg",
"291979/images/image_6_compressed.jpg"
] | [
"291979/stls/kitchen blender.stl"
] | CC0 | https://www.printables.com/model/291979 | data_0044.tar |
1299016 | Kitchen cabinet kickboard plinth 30mm plate and clip | <p>Mounting clip for P Reardon's 30mm kickboard clip.</p><p>Not much to say really. If you need it you need it.</p><p>Recommend printing in PETG at 0.2mm or 0.25mm</p><p>My makes were done on Prusa Core One, with 0.6 HF Obxidian nozzle at 0.25 layer height.</p><p>Screw holes are suitable for 15mm long 4mm countersunk s... | [
"kickboard",
"plinthclip"
] | Household > Kitchen | [
"1299016/images/image_1_compressed.jpg",
"1299016/images/image_2_compressed.jpg"
] | [
"1299016/stls/Kitchen cabinet kickboard plinth 30mm clip.stl",
"1299016/stls/Kitchen cabinet kickboard plinth 30mm plate.stl"
] | CC0 | https://www.printables.com/model/1299016 | data_0044.tar |
438397 | Kitchen Door Organizer - Remix UPD sizes, mounting & more. | <p><i><strong>Organize your kitchen door or workshop with these cool and practical storage containers. </strong></i><br><br>REMIX. I made an update to the cool design by DennisP (Thanks for the design).</p><p>There are now sizes from 3 to 7 tabs.<br><br>Also made holes for mounting the rails with screws. Designed ... | [
"kitchen",
"box",
"organizer",
"container",
"storage"
] | Household > Kitchen | [
"438397/images/image_1_compressed.jpg",
"438397/images/image_2_compressed.jpg",
"438397/images/image_3_compressed.jpg",
"438397/images/image_4_compressed.jpg",
"438397/images/image_5_compressed.jpg",
"438397/images/image_6_compressed.jpg",
"438397/images/image_7_compressed.jpg",
"438397/images/image_8... | [
"438397/stls/Kitchen_Door_Organizer_3_Tabs.stl",
"438397/stls/Kitchen_Door_Organizer_3_Tabs_MOD.stl",
"438397/stls/Kitchen_Door_Organizer_4_Tabs.stl",
"438397/stls/Kitchen_Door_Organizer_4_Tabs_MOD.stl",
"438397/stls/Kitchen_Door_Organizer_5_Tabs.stl",
"438397/stls/Kitchen_Door_Organizer_5_Tabs_001.stl",
... | CC0 | https://www.printables.com/model/438397 | data_0044.tar |
417594 | Kitchen Hook | <p>I designed kitchen hook for hanging scissors etc. You need to use double side tape for hanging.</p> | [] | Household > Kitchen | [
"417594/images/image_1_compressed.jpg"
] | [
"417594/stls/hook.stl"
] | CC0 | https://www.printables.com/model/417594 | data_0044.tar |
152881 | Kitchen Roll Holder / Küchenrollenhalter | <p>A simple, minimalistic kitchen roll holder for wall mounting, printable on the MK3S / Ein einfacher, minimalistischer Küchenrollenhalter für Wandmontage, druckbar auf dem MK3S.</p><p><strong>UPDATE 15.03.2026</strong><br>I created a modified version (V2), a bit more stiff / Ich habe eine modifizierte Version (V... | [
"kitchenroll",
"paperrollholder",
"kuechenrollenhalter",
"kitchenrollholder",
"papierrollenhalter"
] | Household > Kitchen | [
"152881/images/image_1_compressed.jpg",
"152881/images/image_2_compressed.jpg",
"152881/images/image_3_compressed.jpg",
"152881/images/image_4_compressed.jpg"
] | [
"152881/stls/Papierrollenhalter_eckig.stl",
"152881/stls/Papierrollenhalter_V2.stl"
] | CC-BY | https://www.printables.com/model/152881 | data_0044.tar |
1111154 | Kitchen Sink Faucet Replacement Button for Kohler Forte K-R10433 | <p>This part fits a Kohler pull-out faucet handle (Forte Kitchen Sink Faucet K-R10433 with various finishes, one UPC is 0650531224743) that is discontinued and replacement parts (K-1346768) are not readily available, or expensive. This faucet has stream/spray selector buttons that tend to fall off and break.</p><p>This... | [
"faucet",
"sink",
"button",
"selector",
"spray",
"kitchensink",
"stream",
"kohler",
"spout",
"forte",
"masterclean",
"kr10433cp",
"1041319",
"r10433",
"swingspout",
"kitchensinkfaucet",
"kr10433",
"0650531224743"
] | Household > Kitchen | [
"1111154/images/image_1_compressed.jpg",
"1111154/images/image_2_compressed.jpg"
] | [
"1111154/stls/KohlerForteK-R10433_FaucetButton_Not_Marked.stl",
"1111154/stls/KohlerForteK-R10433_FaucetButton_PLA_Marked.stl"
] | CC-BY | https://www.printables.com/model/1111154 | data_0044.tar |
1320467 | Kitchen Spoon Holder Hook Rack | <p>This 3D printable spoon holder system is designed for efficient kitchen organization. It features 10 individual hooks that securely clip onto a central rail. The hooks fit tightly and provide strong support for kitchen tools like spoons, ladles, or spatulas. The entire unit can be mounted on a wall using adhesive st... | [
"kitchen",
"organizer",
"hook",
"utensil",
"spoonholder",
"coreone"
] | Household > Kitchen | [
"1320467/images/image_1_compressed.jpg",
"1320467/images/image_2_compressed.jpg",
"1320467/images/image_3_compressed.jpg"
] | [
"1320467/stls/kochloeffelhaken.stl",
"1320467/stls/kochloeffelhalter.stl"
] | CC0 | https://www.printables.com/model/1320467 | data_0044.tar |
213806 | KitchenAid Dishwasher Lower Dish Rack Wheels | <p>Replacement wheels for KitchenAid lower dish rack. Recommend PETG or ABS </p><p> </p><p>Model number: <strong>KDTE204ESS2</strong></p> | [
"wheel",
"dish",
"rack",
"dishwasher",
"kitchenaid"
] | Hobby & Makers > Mechanical Parts | [
"213806/images/image_1_compressed.jpg",
"213806/images/image_2_compressed.jpg"
] | [
"213806/stls/KitchenAid Washer Rails v1.stl"
] | CC0 | https://www.printables.com/model/213806 | data_0044.tar |
1450601 | Kitchenaid Mixer Attacmenet Stands | <p>A simple and easy to print stand to hold the 4 standard Kitchenaid bowl-lift or 3 head-tilt mixer attachments upright. Saves some space and keeps them organized. The head-tilt models come with a different dough hook that requires more space so make sure you download the right file for your mixer!</p><p>I have also a... | [
"kitchen",
"organizer",
"kitchenaid",
"mixer"
] | Household > Kitchen | [
"1450601/images/image_1_compressed.jpg"
] | [
"1450601/stls/Bowl Lift Attachment Stand w Screw Holes.stl",
"1450601/stls/Bowl Lift Mixer Attachment Stand.stl",
"1450601/stls/Head Tilt Attachment Stand w Screw Holes.stl",
"1450601/stls/Head Tilt Mixer Attachment Stand.stl"
] | GPL3.0 | https://www.printables.com/model/1450601 | data_0044.tar |
162750 | Kitty Filament Swatch |
<p>Wanted a cute to-go filament swatch so decided to start my first Fusion360 project :)</p>
<p>I'd love to see photos if you print it!</p>
<p>Diameter circle: 30mm</p>
<p>Height: 2mm</p>
<p>Highest point ears: 1.6mm</p>
<p>Inner ears: 1.0mm</p>
<p>Quadrants: 0.8, 0.6, 0.4, 0.2</p>
<p>Diameter hole: 3mm</p>
<p>I pri... | [
"cat",
"swatch",
"kitty",
"thingiverse",
"filamentswatch"
] | 3D Printers > Test Models | [
"162750/images/image_1_compressed.jpg",
"162750/images/image_2_compressed.jpg",
"162750/images/image_3_compressed.jpg"
] | [
"162750/stls/Kitty_Swatch.stl"
] | CC-BY | https://www.printables.com/model/162750 | data_0044.tar |
525516 | Kiwi Kit Card | <p>This is one of the animals I found fun to make a kit card from. All the slots go in the same direction, just slide each panel into the slotted disk and set it into the baseplate. </p> | [
"card",
"kit",
"birds",
"desktoy",
"kiwi"
] | Art & Design > Sculptures | [
"525516/images/image_1_compressed.jpg"
] | [
"525516/stls/kiwi.stl"
] | CC-BY | https://www.printables.com/model/525516 | data_0044.tar |
926091 | KLAPKA SKIMMERU / SKIMMER DOOR | [
"pool",
"poolskimmer"
] | Household > Outdoor & Garden | [
"926091/images/image_1_compressed.jpg"
] | [
"926091/stls/Skimmer dvířka - moundfield.stl"
] | CC-BY | https://www.printables.com/model/926091 | data_0044.tar | |
553660 | Klebehaken - Picture hook | <p>selbst etworfen in fusion. vorbild waren die klebehaken eines großen herstellers. habe diese einfach in fusion nachgemacht. hinten drauf starkes spiegelklebeband und man kann von bildern oder schilder dran aufhängen. </p><p>breite 24mm, höhe 45, stärke 3mm</p><p>der zapfen ist 5mm im durchmesser und schaut 9mm ... | [] | Gadgets > Other Gadgets | [
"553660/images/image_1_compressed.jpg",
"553660/images/image_2_compressed.jpg"
] | [
"553660/stls/Klebehaken.stl"
] | CC0 | https://www.printables.com/model/553660 | data_0044.tar |
1340206 | Klein Multimeter gridfinity organizer | [
"gridfinity"
] | Hobby & Makers > Organizers | [
"1340206/images/image_1_compressed.jpg",
"1340206/images/image_2_compressed.jpg"
] | [] | CC0 | https://www.printables.com/model/1340206 | data_0044.tar | |
919216 | Kleiner Pokal für zweifarbigen Druck - Modifizierbar | <p>Kleiner Pokal für zweifarbigen Druck (Sockel und Pokal sind separat). </p><p>Beide Teile sind modifizierbar um zum Beispiel einen Text auf den Sockel zu drucken.</p><p>Support bei den Griffen am Pokal empfohlen. </p><p>Beliebig skalierbar.</p><p>Befestigung der beiden Teile mit Leim. </p><p>Ich habe f... | [
"pokal"
] | Art & Design > Other Art & Designs | [
"919216/images/image_1_compressed.jpg"
] | [
"919216/stls/Pokal-Klein.stl",
"919216/stls/Pokal-Klein_Sockel.stl"
] | CC0 | https://www.printables.com/model/919216 | data_0044.tar |
103573 | Klic pro nakupni voziky | [
"key",
"trolley",
"klic",
"vozik"
] | Hobby & Makers > Tools | [
"103573/images/image_1_compressed.jpg"
] | [
"103573/stls/Klic na nakupni voziky.stl"
] | CC0 | https://www.printables.com/model/103573 | data_0044.tar | |
1325536 | Klicky dock for Duender with Xol | <p>Here is a Klicky dock mount for Duender and Duender MGN9 edition. This is spot on for my setup, using Xol toolhead in both cases. I'm using a pair of screws and ship nuts through the top slotted holes for mounting, with the option to use the perpendicular slotted holes to mount to the front face of the rear extrusio... | [
"klicky",
"xol",
"duender"
] | 3D Printers > Other Printer Parts & Upgrades | [
"1325536/images/image_1_compressed.jpg"
] | [
"1325536/stls/Duender-KlickyDock_mgn9.stl",
"1325536/stls/Duender-KlickyDock_vwheels.stl"
] | GPL2.0 | https://www.printables.com/model/1325536 | data_0044.tar |
849409 | Klicky Probe for Sovol SV08 ABL | <p>Here you can find the last version</p><p><a href="https://www.printables.com/model/938796-sv08-cn3d-shroud-v3-extra-fan-magnets-klicky-led">https://www.printables.com/model/938796-sv08-cn3d-shroud-v3-extra-fan-magnets-klicky-led</a></p><p> </p><p> </p><p> </p><p> </p><p>After making some tests we... | [
"probe",
"abl",
"voron",
"sovol",
"klicky",
"cn3d",
"sv08",
"sovolsv08"
] | 3D Printers > Other Printer Parts & Upgrades | [
"849409/images/image_1_compressed.jpg",
"849409/images/image_10_compressed.jpg",
"849409/images/image_11_compressed.jpg",
"849409/images/image_2_compressed.jpg",
"849409/images/image_3_compressed.jpg",
"849409/images/image_4_compressed.jpg",
"849409/images/image_5_compressed.jpg",
"849409/images/image... | [
"849409/stls/Sovol SV08 Klicky Docking station.stl",
"849409/stls/Sovol SV08 Klicky Holder.stl",
"849409/stls/Sovol SV08 klicky main body.stl"
] | CC0 | https://www.printables.com/model/849409 | data_0044.tar |
164061 | klipper expander mount | [] | 3D Printers > Other Printer Parts & Upgrades | [
"164061/images/image_1_compressed.jpg",
"164061/images/image_2_compressed.jpg",
"164061/images/image_3_compressed.jpg"
] | [
"164061/stls/mountremix.stl"
] | CC-BY | https://www.printables.com/model/164061 | data_0044.tar | |
526165 | Klister and Ski Wax Scraper for Nordic (Cross-Country Skies) | <p>This is a ski wax scraper and Klister removal tool, based off of the scraper included in Swix Klister boxes. I know from first hand experience how easy it is to lose them, so I made a 3D printable replacement! This is a work in progress, and will be updated!</p> | [
"waxing",
"skiwax",
"swix",
"nordicskies"
] | Sports & Outdoor > Winter Sports | [
"526165/images/image_1_compressed.jpg",
"526165/images/image_2_compressed.jpg",
"526165/images/image_3_compressed.jpg"
] | [
"526165/stls/3DPrintableKlisterScraper.stl"
] | CC-BY | https://www.printables.com/model/526165 | data_0044.tar |
168962 | Klička revizních dvířek | <p>Klička revizních dvířek: čistící bod k odpadovému systému, komínková dvířka…</p><p>Průměr hranolu 7mm, mám distanc na 7,2mm, někdy bývá větší nános barvy u lakovaných.</p><p>PETG</p><p>vrstva 0,2</p><p>výplň 25%</p> | [
"key",
"klic",
"klicka"
] | Hobby & Makers > Tools | [
"168962/images/image_1_compressed.jpg",
"168962/images/image_2_compressed.jpg"
] | [
"168962/stls/klička revizních dvířek.stl"
] | CC-BY | https://www.printables.com/model/168962 | data_0044.tar |
1208522 | Klopapier Schaf | <p>Hallo, ich habe diese Model entworfen. <br>Es ist geeignet für jegliche Klopapier rollen. </p> | [
"klopapier",
"klopapierrolle",
"schaf"
] | Household > Bathroom | [
"1208522/images/image_1_compressed.jpg",
"1208522/images/image_2_compressed.jpg",
"1208522/images/image_3_compressed.jpg"
] | [
"1208522/stls/obj_1_Base.stl",
"1208522/stls/obj_2_Head.stl",
"1208522/stls/obj_3_Assembly.stl"
] | CC0 | https://www.printables.com/model/1208522 | data_0044.tar |
974765 | KLP1 230 PLATE STOPPER | [
"bed",
"stopper",
"pei",
"kingroon",
"klp1",
"klp1230"
] | 3D Printers > Other Printer Parts & Upgrades | [
"974765/images/image_1_compressed.jpg"
] | [
"974765/stls/plate stopper KLP1 230.stl"
] | CC-BY | https://www.printables.com/model/974765 | data_0044.tar | |
915296 | KLP1 3WAY FAN DUCT ''BLACK'' | <p>My print is printed from Graphene PET</p><p>Printed on 2 perimeters, filling 40% with a wall height of 0.15mm. </p><p>Supports are not needed</p><p> </p> | [
"fanduct",
"5015fanduct",
"5015blower",
"kingroon",
"fanmod",
"klp1",
"klp210"
] | 3D Printers > Other Printer Parts & Upgrades | [
"915296/images/image_1_compressed.jpg",
"915296/images/image_2_compressed.jpg",
"915296/images/image_3_compressed.jpg",
"915296/images/image_4_compressed.jpg",
"915296/images/image_5_compressed.jpg"
] | [
"915296/stls/Klp1 3way fan duct.stl"
] | CC-BY | https://www.printables.com/model/915296 | data_0044.tar |
1045484 | Klíč k elektrickému rozvaděči - čtyřhranný | [] | Hobby & Makers > Electronics | [
"1045484/images/image_1_compressed.jpg"
] | [
"1045484/stls/electric key.stl"
] | CC0 | https://www.printables.com/model/1045484 | data_0044.tar | |
114551 | Klíček na odvzdušnění radiatorů topení. | <p>Ztratil jsem originální klíček na odvzdušňování topení. Dělat to šroubovákem je opruz. Proto jsem udělal tento rychlý model. Moc krásy to nepobralo, ale funkční to je. Pokud jsou odvzdušňováky v pořádku a nejsou dorvaný na krev, tak plně postačí i tištěný klíček.</p><p>Vnější průměr klíčku je 10mm. Vnitřní 4hran je ... | [
"radiator",
"topeni",
"klic",
"odvzdusneni",
"klicek"
] | Hobby & Makers > Tools | [
"114551/images/image_1_compressed.jpg"
] | [
"114551/stls/KlicekNaOdvzdusneniRadiatoru.stl",
"114551/stls/KlicekNaOdvzdusneniRadiatoru_vetsiOuska.stl"
] | CC-BY | https://www.printables.com/model/114551 | data_0044.tar |
269856 | Klíčenka KTM | [
"keychain",
"key",
"keyring",
"ktm",
"klicenka",
"ktm1090",
"ktmadventure",
"enduro",
"ktm690enduro",
"ktmracing",
"ktmexc",
"klicenky"
] | Hobby & Makers > Automotive | [
"269856/images/image_1_compressed.jpg"
] | [
"269856/stls/KTM přívěšek.stl"
] | CC-BY | https://www.printables.com/model/269856 | data_0044.tar | |
158593 | Klíčenka pentagram | [] | Fashion > Other Fashion Accessories | [
"158593/images/image_1_compressed.jpg"
] | [
"158593/stls/Pentagram.stl"
] | CC0 | https://www.printables.com/model/158593 | data_0044.tar | |
206538 | Klíčenky Riot, Snapchat, Toyota, Chanel | <p>Malé klíčenky</p> | [
"black",
"toyota",
"riot",
"klicenka",
"chanel",
"snapchat"
] | Art & Design > 2D Plates & Logos | [
"206538/images/image_1_compressed.jpg"
] | [
"206538/stls/chanel v1.stl",
"206538/stls/riot v1.stl",
"206538/stls/snapchat v1.stl",
"206538/stls/toyota v1.stl"
] | GPL2.0 | https://www.printables.com/model/206538 | data_0044.tar |
514689 | Knife sharpener guide body 10mm - Print-in-Place - M5 Setscrew | <p>The M5 Screw and Nut Variation of the Knife Sharpener Guide Body is a modified version based on badpassword's <a href="https://www.thingiverse.com/thing:1274297">10mm guide body design</a>, originally created for the <a href="https://www.thingiverse.com/thing:1274297">Knife Sharpening Tool by CNCKitchen</a>.</p><p>T... | [
"knife",
"sharpening",
"pro",
"edge",
"sharpener"
] | Household > Kitchen | [
"514689/images/image_1_compressed.jpg"
] | [
"514689/stls/Pivot-10mm.stl"
] | CC-BY | https://www.printables.com/model/514689 | data_0044.tar |
1612279 | Knight Pen Holder | <p>Don't you also want a knight to hold your sword (aka pen) during your just earned rest (aka coffee break)?</p><p>There you have it, Hope you find it useful. Have fun!</p><blockquote><p>This model is a remix of this one: <a target="_blank" rel="noopener noreferrer nofollow" class="editor-link" href="https://make... | [
"office",
"holder",
"desk",
"pen",
"knight",
"gadget",
"penholder",
"kneeling"
] | Household > Office | [
"1612279/images/image_1_compressed.jpg",
"1612279/images/image_2_compressed.jpg",
"1612279/images/image_3_compressed.jpg",
"1612279/images/image_4_compressed.jpg"
] | [
"1612279/stls/knight_pen_holder.stl"
] | CC0 | https://www.printables.com/model/1612279 | data_0044.tar |
1269484 | Knipex Pliers Wrench Holder - 3 Sizes HSW | <p>All sizes mount using a hollow hex insert</p><p>STL, STEP, and parametric FreeCAD files included</p><p> </p><p>Sizing:</p><ul><li>Small - 150mm</li><li>Medium - 180mm</li><li>Large - 250mm</li></ul> | [
"pliersholder",
"knipex",
"honeycombstoragewall",
"hsw"
] | Hobby & Makers > Organizers | [
"1269484/images/image_1_compressed.jpg",
"1269484/images/image_2_compressed.jpg",
"1269484/images/image_3_compressed.jpg",
"1269484/images/image_4_compressed.jpg"
] | [
"1269484/stls/Pliers_Wrench_L.stl",
"1269484/stls/Pliers_Wrench_M.stl",
"1269484/stls/Pliers_Wrench_S.stl"
] | GPL3.0 | https://www.printables.com/model/1269484 | data_0044.tar |
175850 | Knipex Tool Holders for Ikea Skådis | <p><a href="https://www.thingiverse.com/thing:2876548/files">Remix of this design</a></p><p> </p><ul><li>No Supports Necessary</li><li>Print as placed in the 3MF files (pegs up)</li><li>Fits very tight onto the Skadis board for a solid fit</li><li>Models are labeled after the Kinpex part number found on the handle... | [
"ikea",
"skadis",
"knipex",
"ikeaskadis",
"knipexholder"
] | Hobby & Makers > Tools | [
"175850/images/image_1_compressed.jpg"
] | [
"175850/stls/78 03 125.stl",
"175850/stls/97 21 215 C.stl",
"175850/stls/97 72 180.stl"
] | CC0 | https://www.printables.com/model/175850 | data_0044.tar |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.