model_id stringlengths 1 7 | name stringlengths 2 210 | description stringlengths 0 253k | tags listlengths 0 494 | printables_category stringclasses 80
values | image_paths listlengths 0 289 | stl_paths listlengths 0 2.73k | license stringclasses 7
values | source stringlengths 34 40 | shard_file stringclasses 49
values |
|---|---|---|---|---|---|---|---|---|---|
683699 | 1/8th scale RC car stand | <p>Rotating Rc car stand built for the Arrma notorious but also works my infraction and other 1/8th scale RC cars. Segmented parts tray incorporated into base. Uses standard skateboard bearing for turn table.</p><p>Printed in PLA with 100% infill on CR10sPro. Used .18 layer height with eSun PLA+ at 215c nozzle temp and... | [
"rc",
"truck",
"arrma",
"notorious"
] | Hobby & Makers > RC & Robotics | [
"683699/images/image_1_compressed.jpg",
"683699/images/image_2_compressed.jpg",
"683699/images/image_3_compressed.jpg",
"683699/images/image_4_compressed.jpg",
"683699/images/image_5_compressed.jpg"
] | [
"683699/stls/RC Car Stand v3.stl"
] | CC-BY | https://www.printables.com/model/683699 | data_0047.tar |
718713 | 2 way Stand for TH05 Temperature Humidity Sensor | <p>Stand for common Temperature Humidity Sensor Tuya, Wi-Fi</p><p>usable in 2 angles as pictured on photos</p><p> </p><p>.STP file included feel free to remix</p> | [
"sensor",
"temperature",
"temperaturesensor",
"humiditysensor",
"zth05",
"th05"
] | Gadgets > Other Gadgets | [
"718713/images/image_1_compressed.jpg",
"718713/images/image_2_compressed.jpg",
"718713/images/image_3_compressed.jpg",
"718713/images/image_4_compressed.jpg",
"718713/images/image_5_compressed.jpg",
"718713/images/image_6_compressed.jpg",
"718713/images/image_7_compressed.jpg"
] | [
"718713/stls/Stand.stl"
] | CC-BY | https://www.printables.com/model/718713 | data_0047.tar |
714737 | 2- and 3-way splitter with blast gates for 2 1/4" shop vac (Ridgid) | <p>Optimized for ease of printing and assembly. The main body prints in one piece with supports to clear for the slot for the gates. Gates come in two pieces; the bottom piece can be bolted (m4) or glued on after you slot it in the gate.</p><p>Gate slots are sized so a ¼" chisel makes very quick work of cleaning out th... | [
"gate",
"ridgid",
"shopvac",
"splitter"
] | Hobby & Makers > Tools | [
"714737/images/image_1_compressed.jpg",
"714737/images/image_2_compressed.jpg",
"714737/images/image_3_compressed.jpg",
"714737/images/image_4_compressed.jpg"
] | [
"714737/stls/2 way splitter.stl",
"714737/stls/3 way splitter.stl",
"714737/stls/Gate bottom.stl",
"714737/stls/Gate.stl"
] | CC-BY | https://www.printables.com/model/714737 | data_0047.tar |
648836 | 2.5" to 3.5" (SFF to LFF) HDD / SSD adapter (SATA and SAS, converter, mounting kit) | <p>The adapter is designed to be used in a 3.5" (LFF) bay, fitting a 2.5" (SFF) SATA/SAS HDD/SSD drive. The interface connectors of the 2.5" drive will be positioned where the connectors of the 3.5" drive would be.</p><p>It has all the mounting holes that are physically accessible:</p><ul><li>3 on the left side of the ... | [
"computer",
"adapter",
"hdd",
"sas",
"sata",
"converter",
"freecad",
"nosupport",
"computeraccessories",
"nosupports",
"sff",
"sdd",
"lff"
] | Gadgets > Computers | [
"648836/images/image_1_compressed.jpg",
"648836/images/image_2_compressed.jpg",
"648836/images/image_3_compressed.jpg",
"648836/images/image_4_compressed.jpg"
] | [
"648836/stls/2.5in_to_3.5in_adapter_sff_to_lff_v11_hole_2.75mm.stl",
"648836/stls/2.5in_to_3.5in_adapter_sff_to_lff_v11_hole_3.00mm.stl",
"648836/stls/2.5in_to_3.5in_adapter_sff_to_lff_v11_hole_3.25mm.stl",
"648836/stls/2.5in_to_3.5in_adapter_sff_to_lff_v11_hole_3.50mm.stl",
"648836/stls/2.5in_to_3.5in_adap... | CC-BY | https://www.printables.com/model/648836 | data_0047.tar |
712679 | 2009 Honda Civic key fob | <p>In addition to the factory screw included in the original piece that is used to secure the metal key to plastic housing, you'll also need: </p><p>2 8mm M2 screws</p><p>1 M2 nut to be put into slot on front piece.. The second screw is just tension fit. </p><p>Print with large flat sides on printer bed. Supp... | [
"car",
"fob",
"key"
] | Hobby & Makers > Automotive | [
"712679/images/image_1_compressed.jpg",
"712679/images/image_2_compressed.jpg"
] | [
"712679/stls/Key Fob bottom.stl",
"712679/stls/Key Fob top.stl"
] | CC-BY | https://www.printables.com/model/712679 | data_0047.tar |
764189 | 2020 Extrusion Endcap for Voron | <p>I couldn't find any suitable end caps for the top of my Voron so I designed my own. They are tight and are the same thickness as the plexiglass cover of my kit including the seals. I also made a 1mm thick version.</p><p>I printed from Polymaker ASA, layer thickness 0.2 mm.</p> | [
"extrusion",
"2020",
"endcap",
"voron24"
] | 3D Printers > Voron Parts & Upgrades | [
"764189/images/image_1_compressed.jpg"
] | [
"764189/stls/Voron 2020 Top Extrusion Endcap 1.0mm.stl",
"764189/stls/Voron 2020 Top Extrusion Endcap 4.2mm.stl"
] | CC0 | https://www.printables.com/model/764189 | data_0047.tar |
687651 | 2d planet | [
"easy",
"planet",
"2d",
"best"
] | Art & Design > 2D Plates & Logos | [
"687651/images/image_1_compressed.jpg"
] | [
"687651/stls/Funky Turing (1).stl"
] | CC-BY | https://www.printables.com/model/687651 | data_0047.tar | |
752627 | 2kg spool holder for prusa | <p>I needed a larger diameter version of the Prusa spool holder for 2kg spools.</p><p> </p><h3>It now accepts spools with 30cm diameter & 10cm width.</h3><p> </p><p>The Original STEP file included in the MK4 version is in bad shape overall, so to do my changes I needed to design a clean model. Basic Shape... | [
"prusa",
"spool",
"prusament",
"holder",
"filament",
"2kgspool"
] | 3D Printers > Other Printer Parts & Upgrades | [
"752627/images/image_1_compressed.jpg",
"752627/images/image_2_compressed.jpg",
"752627/images/image_3_compressed.jpg",
"752627/images/image_4_compressed.jpg",
"752627/images/image_5_compressed.jpg",
"752627/images/image_6_compressed.jpg"
] | [
"752627/stls/2kg spool holder big 120mmSpool.stl",
"752627/stls/2kg spool holder big diameter spool.stl",
"752627/stls/2kg spool holder original shape.stl",
"752627/stls/filament guide shallow.stl"
] | GPL2.0 | https://www.printables.com/model/752627 | data_0047.tar |
659126 | 2x4 Shelf Bracket (Similar to Yosemite Brackets) | <p>Update 3: The v3 “Slim” files. Final new version for now is a pair of new files, the “slim” brackets. I trimmed some material off that may not have been necessary, speeding printing and saving material. I thickened the bases to ½" for strength were it probably needs it. Probably best to start here.</p><p>Update 2: v... | [
"shelf",
"garage",
"shelfbracket"
] | Household > Outdoor & Garden | [
"659126/images/image_1_compressed.jpg",
"659126/images/image_2_compressed.jpg",
"659126/images/image_3_compressed.jpg",
"659126/images/image_4_compressed.jpg",
"659126/images/image_5_compressed.jpg"
] | [] | CC-BY | https://www.printables.com/model/659126 | data_0047.tar |
649522 | 3-Way Heatbed Cable Cover- Prusa MK3/S+ | <p>This cable cover the for Heatbed heater cable that allows the cable to flow in 3 different directions: Straight, Left Side, and Right Side. This is a useful component for when the printer is in an enclosure, or just operating within a tight space (as is my case). </p><p>These parts can be printed without suppor... | [
"upgrade",
"cover",
"heatbed",
"mk3splus"
] | 3D Printers > Prusa Parts & Upgrades | [
"649522/images/image_1_compressed.jpg",
"649522/images/image_2_compressed.jpg",
"649522/images/image_3_compressed.jpg",
"649522/images/image_4_compressed.jpg",
"649522/images/image_5_compressed.jpg",
"649522/images/image_6_compressed.jpg",
"649522/images/image_7_compressed.jpg",
"649522/images/image_8... | [
"649522/stls/HeatbedCableClamp _3-Way_MK3Splus_BOTTOM.stl",
"649522/stls/HeatbedCableClamp _3-Way_MK3_BOTTOM.stl",
"649522/stls/HeatbedCableClamp _3-Way_MK3_TOP.stl",
"649522/stls/HeatbedCableCover _3-Way_MK3Splus_TOP.stl"
] | GPL2.0 | https://www.printables.com/model/649522 | data_0047.tar |
659649 | 3.5" PVC Pipe Vented Cap | <p>It's a vented cover for a 3.5" PVC Pipe. The cover is a Male slip fitting, but fits snug since I made the model ever so slightly larger than the average size.</p><p>Our use case was to cover a PVC dryer vent on the outside of the house to keep vermin from crawling in. The caps available at our local hardware store (... | [
"vent",
"vented",
"pvc"
] | Household > Other House Equipment | [
"659649/images/image_1_compressed.jpg"
] | [
"659649/stls/3.5in PVC PIPE STRAIN COVER MALE SLIP-Compound.stl"
] | CC-BY | https://www.printables.com/model/659649 | data_0047.tar |
710315 | 30 x 50 Bin for Multiboard | <p>This is a small bin to hold my Gorilla Glue on my Multiboard, I made it a little bigger incase the next glue I order isn't the same size. I have added the STL and STEP file so you can modify it for your needs.</p> | [
"bin",
"multiboard"
] | Hobby & Makers > Organizers | [
"710315/images/image_1_compressed.jpg",
"710315/images/image_2_compressed.jpg"
] | [
"710315/stls/30x50-Bin.stl"
] | CC-BY | https://www.printables.com/model/710315 | data_0047.tar |
755519 | 3D Print Car Water Cap Replica | [
"car",
"nissan",
"carparts",
"navara",
"watercap"
] | Hobby & Makers > Automotive | [
"755519/images/image_1_compressed.jpg",
"755519/images/image_2_compressed.jpg",
"755519/images/image_3_compressed.jpg"
] | [
"755519/stls/Car Water Cap.stl"
] | CC0 | https://www.printables.com/model/755519 | data_0047.tar | |
648933 | 3d toy car | <p>3d toy car </p> | [
"car"
] | Art & Design > Other Art & Designs | [
"648933/images/image_1_compressed.jpg"
] | [
"648933/stls/car.stl"
] | CC-BY | https://www.printables.com/model/648933 | data_0047.tar |
802891 | 3Dwork SLA/Resin Calibration Test | <p>More detailed information and guide → <a href="https://labs-3dwork-io.translate.goog/guias-impresion-3d/guia-calibracion-impresoras-3d-sla-resina?_x_tr_sl=es&_x_tr_tl=en&_x_tr_hl=es&_x_tr_pto=wapp">English</a> <a href="https://labs.3dwork.io/guias-impresion-3d/guia-calibracion-impresoras-3d-sla-resina">S... | [
"anycubic",
"resin",
"resinprinter",
"elegoo",
"phrozen",
"resintest",
"uniformation"
] | 3D Printers > Test Models | [
"802891/images/image_1_compressed.jpg",
"802891/images/image_2_compressed.jpg",
"802891/images/image_3_compressed.jpg",
"802891/images/image_4_compressed.jpg"
] | [
"802891/stls/3DWorkSLACalibrationTestv1_25_3DWORK.stl.stl",
"802891/stls/3DWorkSLACalibrationTestv1_25_ELECTROBITS.stl",
"802891/stls/3DWorkSLACalibrationTestv1_25_NoLogo.stl"
] | CC-BY | https://www.printables.com/model/802891 | data_0047.tar |
679092 | 3x3 Puzzle Cube (Toy) | <p>This is a cube that separates into multiple parts. I designed it for fun. Enjoy!</p> | [] | Toys & Games > Building Toys | [
"679092/images/image_1_compressed.jpg",
"679092/images/image_2_compressed.jpg"
] | [
"679092/stls/Puzzle Cube (Print).stl"
] | GPL2.0 | https://www.printables.com/model/679092 | data_0047.tar |
696434 | 49ers helmet pencil holder | [
"pencilholder",
"football",
"49ers"
] | Hobby & Makers > Organizers | [
"696434/images/image_1_compressed.jpg",
"696434/images/image_2_compressed.jpg",
"696434/images/image_3_compressed.jpg"
] | [
"696434/stls/49ers helmet pencil holder.stl"
] | CC0 | https://www.printables.com/model/696434 | data_0047.tar | |
709707 | 5 gallon water jug cap | <p>I bought a bunch of 5 gallon jugs to fill my inside cistern on my property, but the caps were too hard to get on and off. My hands just don't work like they used to, and trying to twist and pull those caps with the hole in the center for the upside dispenser things was just not working for me. So, off to... | [
"water",
"cap",
"jug"
] | Household > Kitchen | [
"709707/images/image_1_compressed.jpg",
"709707/images/image_2_compressed.jpg",
"709707/images/image_3_compressed.jpg",
"709707/images/image_4_compressed.jpg",
"709707/images/image_5_compressed.jpg",
"709707/images/image_6_compressed.jpg",
"709707/images/image_7_compressed.jpg",
"709707/images/image_8... | [
"709707/stls/5 Gal Water Jug Cap v2 x4.stl",
"709707/stls/5 Gal Water Jug Cap v2.stl"
] | CC-BY | https://www.printables.com/model/709707 | data_0047.tar |
729237 | 510 Vape Travel Case | <p>There are spots to hold the battery, cartridge, and charger. </p><p>I tested the fit with four combos of manufacturer and they all worked, but your mileage may vary. </p><p>I printed in PETG to take advantage of the flexibility for the closure. </p><p>.f3d included for tinkering.</p> | [
"case",
"vape",
"510"
] | Gadgets > Other Gadgets | [
"729237/images/image_1_compressed.jpg",
"729237/images/image_2_compressed.jpg"
] | [
"729237/stls/rugged510Case-Bottom.stl",
"729237/stls/rugged510Case-Top.stl"
] | CC-BY | https://www.printables.com/model/729237 | data_0047.tar |
666189 | 8E0863727A VW Hood Insulation Pad Clip | <h4><strong>About model</strong></h4><p>My custom design of Hood insulation Pad Clip for VW Cars. This was made for Škoda Fabia II FL (2012).</p><p>Size: 25x20x17mm</p><h4><strong>Compatibility</strong></h4><p>VW carmakers brands</p><h4><strong>Modifications</strong></h4><p>I optimised original VW design like so:</p><u... | [
"golf",
"volkswagen",
"seat",
"audi",
"skoda",
"fabia"
] | Hobby & Makers > Automotive | [
"666189/images/image_1_compressed.jpg",
"666189/images/image_2_compressed.jpg"
] | [
"666189/stls/8E0863727A -VW Hood Insulation Pad Clip.stl"
] | CC-BY | https://www.printables.com/model/666189 | data_0047.tar |
670413 | 8mm Linear Shaft Rod Support - SK8 | <p><a href="https://www.tinkercad.com/things/8uxIFWMSSD8-8mm-linear-shaft-rod-support-sk8">https://www.tinkercad.com/things/</a></p> | [
"linear",
"drawer",
"sk8"
] | 3D Printers > Accessories | [
"670413/images/image_1_compressed.jpg"
] | [
"670413/stls/8mm Linear Shaft Rod Support - SK8.stl"
] | GPL3.0 | https://www.printables.com/model/670413 | data_0047.tar |
689848 | @flowerpot stand@Pawel@ | [
"flower",
"flowerpot"
] | 3D Printers > Accessories | [
"689848/images/image_1_compressed.jpg"
] | [
"689848/stls/@flowerpot stand@Pawel@ (2).stl"
] | CC0 | https://www.printables.com/model/689848 | data_0047.tar | |
793794 | A simple no-frills Raspberry Pi mount | <p>Don't need a whole case? Just mount your Pi where you need it.</p> | [] | Hobby & Makers > Electronics | [
"793794/images/image_1_compressed.jpg",
"793794/images/image_2_compressed.jpg"
] | [
"793794/stls/simple counter sunk.stl",
"793794/stls/simple RPi mount.stl"
] | CC-BY | https://www.printables.com/model/793794 | data_0047.tar |
746286 | A Swiffer Duster System | <h5>Goal</h5><p>Instead of trying to make things compatible with the original product, I went with something easy to print (almost no supports) and easy to just press together.</p><h5> Printing</h5><p>I used PETG with a 0.4 nozzle and 0.2 layer heights. Bigger options might be a problem as the tolerances bet... | [] | Household > Other House Equipment | [
"746286/images/image_1_compressed.jpg",
"746286/images/image_2_compressed.jpg",
"746286/images/image_3_compressed.jpg",
"746286/images/image_4_compressed.jpg"
] | [
"746286/stls/Swiffer-Base.stl",
"746286/stls/Swiffer-Extension.stl",
"746286/stls/Swiffer-Handle.stl"
] | CC-BY | https://www.printables.com/model/746286 | data_0047.tar |
677139 | A1 Mini Wide Spool Extension | <p>The Bambu Lab A1 Mini comes with a spool holder that only supports spools with a max width of 68 mm. This extender replaces the bar on the included spool holder (there's a clip that can be used to separate the arm from the bar). I printed it with the connecting piece facing up and supports turned on.</p> | [] | 3D Printers > Bambu Lab Parts & Upgrades | [
"677139/images/image_1_compressed.jpg"
] | [
"677139/stls/spool_extension.stl"
] | CC0 | https://www.printables.com/model/677139 | data_0047.tar |
782158 | AD5M/PRO Toolhead Duct | <p>Replacement toolhead duct for Flashforge adventurer 5M/ 5M Pro. Has beveled exterior surfaces for better printability and aesthetics. There are both normal and mouse ear versions. No support needed but does need to be able to bridge the center cavity. Print in ABS, ASA, or PETG etc. Use .10-.15mm layer height. Stock... | [
"duct",
"flashforge",
"adventurer",
"toolhead",
"ad5m",
"ad5mpro"
] | 3D Printers > Other Printer Parts & Upgrades | [
"782158/images/image_1_compressed.jpg",
"782158/images/image_2_compressed.jpg"
] | [
"782158/stls/ad5mductears.stl",
"782158/stls/ad5mductv4.stl"
] | CC0 | https://www.printables.com/model/782158 | data_0047.tar |
794872 | Adjustable dripping irrigation set | <p>I designed components for my greenhouse irrigation system. It fits regular 1/2" (13 mm) hose and 4.6 mm hose (tested on Gardena irrigation 4.6 mm hose).</p><p>Dripper endpoints are adjustable so them allow to set the desired amount of water for each plant.</p><p>See attached irrigation-print-setup.3mf for printing h... | [
"garden",
"gardena",
"irrigation",
"clamp",
"greenhouse",
"dripping"
] | Household > Outdoor & Garden | [
"794872/images/image_1_compressed.jpg",
"794872/images/image_2_compressed.jpg",
"794872/images/image_3_compressed.jpg",
"794872/images/image_4_compressed.jpg",
"794872/images/image_5_compressed.jpg",
"794872/images/image_6_compressed.jpg",
"794872/images/image_7_compressed.jpg",
"794872/images/image_8... | [
"794872/stls/Connector - 13mm to M12.stl",
"794872/stls/Connector - 4.6mm to M12.stl",
"794872/stls/Dripper - Cap 1.stl",
"794872/stls/Dripper - Cap 2.stl",
"794872/stls/Dripper - Cap 3.stl",
"794872/stls/Dripper - Cap blind.stl",
"794872/stls/Dripper 13mm.stl",
"794872/stls/Dripper 4.6mm.stl",
"794... | CC-BY | https://www.printables.com/model/794872 | data_0047.tar |
803831 | adjustable furniture foot | <p>UPDATE: uploaded also short version (56mm min)</p> | [
"desk",
"furniture",
"furniturefoot"
] | Household > Other House Equipment | [
"803831/images/image_1_compressed.jpg",
"803831/images/image_2_compressed.jpg",
"803831/images/image_3_compressed.jpg"
] | [
"803831/stls/Inner part short.stl",
"803831/stls/Inner part.stl",
"803831/stls/Outer part short.stl",
"803831/stls/Outer part.stl"
] | CC-BY | https://www.printables.com/model/803831 | data_0047.tar |
707974 | Adventure Peely [Fortnite Skin] | [
"fortnite"
] | Gadgets > Video Games | [
"707974/images/image_1_compressed.jpg"
] | [
"707974/stls/Adventure Peely.stl"
] | CC0 | https://www.printables.com/model/707974 | data_0047.tar | |
706136 | Adventurer3/4 Nozzle box | [
"nozzlebox"
] | 3D Printers > Accessories | [
"706136/images/image_1_compressed.jpg",
"706136/images/image_2_compressed.jpg",
"706136/images/image_3_compressed.jpg",
"706136/images/image_4_compressed.jpg",
"706136/images/image_5_compressed.jpg"
] | [
"706136/stls/ADV3,4 Nozzle box V2.stl"
] | CC-BY | https://www.printables.com/model/706136 | data_0047.tar | |
711163 | ADXL345 Mount for Voron Stealthburner | <p>I did not like the mount that came with the Stealthburner files since the X and Z axes were swapped. I redesigned the mount so that all axes are aligned.</p><p>The mount attaches to the two inserts designed into the Stealthburner for this purpose.</p> | [] | 3D Printers > Voron Parts & Upgrades | [
"711163/images/image_1_compressed.jpg",
"711163/images/image_2_compressed.jpg"
] | [
"711163/stls/ADXL345 Mount for Stealthburner - 15mm spaced holes.stl"
] | CC-BY | https://www.printables.com/model/711163 | data_0047.tar |
705534 | AgonLight2 Retro Case | <p>Case for the <a href="https://www.thebyteattic.com/p/agon.html">Agon</a> modern 8-bit computer by <a href="https://www.bernardokastrup.com/">Bernardo Kastrup</a> et al.</p><p>I wanted to create a case in the style of the home computers of the 1980s.</p><p>The parts can be printed on a normal-sized printer. Some asse... | [
"8bit",
"retro",
"computer",
"computercase",
"agon",
"agonlight"
] | Gadgets > Computers | [
"705534/images/image_1_compressed.jpg",
"705534/images/image_10_compressed.jpg",
"705534/images/image_11_compressed.jpg",
"705534/images/image_2_compressed.jpg",
"705534/images/image_3_compressed.jpg",
"705534/images/image_4_compressed.jpg",
"705534/images/image_5_compressed.jpg",
"705534/images/image... | [
"705534/stls/ac_back_wall-left.stl",
"705534/stls/ac_back_wall-right.stl",
"705534/stls/ac_blind-left.stl",
"705534/stls/ac_blind-right.stl",
"705534/stls/ac_isolator.stl",
"705534/stls/ac_keyboard_frame-left.stl",
"705534/stls/ac_keyboard_frame-right.stl",
"705534/stls/ac_led_cover.stl",
"705534/st... | CC-BY | https://www.printables.com/model/705534 | data_0047.tar |
798451 | AirTag Holder (TPU) | <ul><li>AirTag Holder consisting of one component</li><li>It has to be printed with TPU</li><li>No supports needed, eventually only for key holder part</li></ul> | [
"gadgets",
"phone",
"airtag",
"appel"
] | Gadgets > Other Gadgets | [
"798451/images/image_1_compressed.jpg",
"798451/images/image_2_compressed.jpg",
"798451/images/image_3_compressed.jpg"
] | [
"798451/stls/Airtag.stl"
] | CC-BY | https://www.printables.com/model/798451 | data_0047.tar |
684553 | Airthings view plus desktop stand | <p>I created this little desktop stand for my Airthings view plus. It can be printed without supports and I printed it with 50% infill to add some weight to it. </p><p>If you decide to print this please post me a make! </p> | [
"desktop",
"stand",
"plus",
"view",
"airthings"
] | Household > Other House Equipment | [
"684553/images/image_1_compressed.jpg",
"684553/images/image_2_compressed.jpg",
"684553/images/image_3_compressed.jpg"
] | [
"684553/stls/Aithings view plus desktop stand U shape.stl",
"684553/stls/Aithings view plus desktop stand.stl"
] | CC-BY | https://www.printables.com/model/684553 | data_0047.tar |
782583 | Albi 2.0 base | [
"base",
"stojan",
"tuzka",
"albi"
] | Learning > Other 3D Objects for Learning | [
"782583/images/image_1_compressed.jpg",
"782583/images/image_2_compressed.jpg",
"782583/images/image_3_compressed.jpg"
] | [
"782583/stls/albi_base.stl",
"782583/stls/albi_eyes_smile.stl"
] | CC-BY | https://www.printables.com/model/782583 | data_0047.tar | |
691768 | Allen Wrench Holder Gridfinity | <p>added 4 more sizes and make it gridfinity compatible</p> | [
"organizer",
"allenwrench",
"gridfinty"
] | 3D Printers > Accessories | [
"691768/images/image_1_compressed.jpg",
"691768/images/image_2_compressed.jpg"
] | [
"691768/stls/allen wrench holder gridfinity.stl"
] | CC-BY | https://www.printables.com/model/691768 | data_0047.tar |
657450 | ALPHA RELEASE - Dual Fan Mod for Mk4 for Faster PLA Printing | <h3>DISCLAIMER:</h3><p>This is a very early release of this model and is intended for experienced users only until further development has been completed. Many quality-of-life features are lacking, and this should be seen as an early prototype rather than a completed model.</p><h5> </h5><h4>Instructions:</h4><p>&n... | [
"prusa",
"dual",
"mod",
"fan",
"cooling",
"duct",
"shroud",
"mk4"
] | 3D Printers > Prusa Parts & Upgrades | [
"657450/images/image_1_compressed.jpg",
"657450/images/image_2_compressed.jpg",
"657450/images/image_3_compressed.jpg"
] | [
"657450/stls/Dual Duct Assy.stl",
"657450/stls/Dual Fan Hotend Mount.stl"
] | CC-BY | https://www.printables.com/model/657450 | data_0047.tar |
748506 | AMS Lite Nummern 1-4 | [] | 3D Printers > Bambu Lab Parts & Upgrades | [
"748506/images/image_1_compressed.jpg",
"748506/images/image_2_compressed.jpg"
] | [
"748506/stls/AMS NR 1 v5.stl",
"748506/stls/AMS NR 2 v4.stl",
"748506/stls/AMS NR 3 v3.stl",
"748506/stls/AMS NR 4 v7.stl"
] | CC0 | https://www.printables.com/model/748506 | data_0047.tar | |
690798 | Animal Crossing - Leaf - Keychain - | [
"llavero"
] | Costumes & Accessories > Props | [
"690798/images/image_1_compressed.jpg"
] | [
"690798/stls/Animal Crossing Leaf Keychain.stl",
"690798/stls/Beeg Hole -Animal Crossing Leaf Keychain.stl",
"690798/stls/Extra Holes -Animal Crossing Leaf Keychain.stl"
] | CC0 | https://www.printables.com/model/690798 | data_0047.tar | |
650502 | Anker PowerPort Atom III Slim Charger Under Desk Mount | <p>Desk mount for a Anker PowerPort Atom III Slim Charger to be mounted under the table.<br><br>The main goal was a tight fit for easy cable plugging and unplugging without any wiggling.<br><br><strong>Edit</strong><br>I made this model because there was none when I first looked. However, after I created and installed ... | [
"charger",
"usb",
"anker",
"deskmount",
"powerport"
] | Gadgets > Other Gadgets | [
"650502/images/image_1_compressed.jpg",
"650502/images/image_2_compressed.jpg"
] | [
"650502/stls/anker_desk_mount.stl"
] | CC-BY | https://www.printables.com/model/650502 | data_0047.tar |
670484 | Ankermake Logo for Ankermake M5C Filament Waste Bin and Utility Box | <p>Ankermake Logo for Ankermake M5C Filament Waste Bin and Utility Box</p><p>Simple and fast print to give these bins a nice finishing touch.</p><p>Nothing special to print. Set to precision print and ready in less than 5 minutes.</p> | [
"bins",
"ankermake",
"ankermakem5c",
"m5c"
] | 3D Printers > Other Printer Parts & Upgrades | [
"670484/images/image_1_compressed.jpg",
"670484/images/image_2_compressed.jpg",
"670484/images/image_3_compressed.jpg"
] | [
"670484/stls/Anker Make Bin Logos.stl"
] | CC-BY | https://www.printables.com/model/670484 | data_0047.tar |
776439 | Anti-Lock Door Stop/Bumper | <p>It's so frustrating when you open a door all the way to the wall and it locks behind you when you shut it! 😠<br>So I designed a wall bumper that keeps the door knob from locking when hits the wall! 😄</p><p>I printed this with white Overture PLA+ but TPU would be best, adding cushion to the door and wall.</p><p>The... | [
"door",
"wallmount",
"lock",
"protective",
"protector",
"doorstop",
"protection",
"doorknob",
"protect",
"doorstopper",
"drywallanchor",
"drywallscrew",
"antilock"
] | Household > Other House Equipment | [
"776439/images/image_1_compressed.jpg",
"776439/images/image_2_compressed.jpg",
"776439/images/image_3_compressed.jpg"
] | [
"776439/stls/Door Stop - Anti-Lock.stl"
] | CC-BY | https://www.printables.com/model/776439 | data_0047.tar |
751130 | anti-slip foot of the clothes dryer | [
"antislip",
"clothesdryer",
"susak",
"protiskluz"
] | Household > Bathroom | [
"751130/images/image_1_compressed.jpg",
"751130/images/image_2_compressed.jpg",
"751130/images/image_3_compressed.jpg"
] | [
"751130/stls/anti-slip foot of the clothes dryer.stl"
] | CC-BY | https://www.printables.com/model/751130 | data_0047.tar | |
675301 | Anycubic Kobra 2 Max Top Middle Mount Spool Holder (redesign) | [
"2",
"anycubic",
"kobra",
"kobra2max"
] | 3D Printers > Anycubic Parts & Upgrades | [
"675301/images/image_1_compressed.jpg",
"675301/images/image_2_compressed.jpg"
] | [
"675301/stls/kobra2.stl"
] | CC-BY | https://www.printables.com/model/675301 | data_0047.tar | |
706681 | Anycubic Kobra 2 Neo microSD card cover / guide | <p>Prints in a few seconds and saves your sanity inserting the sd card.</p><p>Its designed to fit in tightly, maybe print a few different scales (+- 1-2%) at once if you are unsure about accuracy.</p><p>settings: </p><p>quick and easy/v1: 0.28 first layer, 0.2 layers, arachne. Concentric infill looks nice.</p><p>t... | [
"guide",
"microsd",
"anycubic",
"kobra2neo",
"anycubickobra2neo"
] | 3D Printers > Anycubic Parts & Upgrades | [
"706681/images/image_1_compressed.jpg",
"706681/images/image_2_compressed.jpg"
] | [
"706681/stls/kobra2 sd guide v1 - quick and easy.stl",
"706681/stls/kobra2 sd guide v2 - thick and chamfered.stl"
] | CC-BY | https://www.printables.com/model/706681 | data_0047.tar |
715828 | Anycubic kobra 2 neo spool holder | <p>Zkracena osa drzaku civky, original byl prilis dlouhy pro mne</p><p>Shortened axis of the spool holder, the original was too long for me</p> | [] | 3D Printers > Anycubic Parts & Upgrades | [
"715828/images/image_1_compressed.jpg",
"715828/images/image_2_compressed.jpg"
] | [
"715828/stls/KobraSadapter.stl"
] | CC0 | https://www.printables.com/model/715828 | data_0047.tar |
797863 | Anzeige Einsatzbereitschaft | <p>Getestet in Polymaker PolyTerra PLA+ grau, rot und grün.</p><p>Vermutlich wäre PETG besser geeignet. Ich hatte aber die benötigten Farben nicht.</p> | [
"indicator",
"organization",
"organize",
"organisation",
"feuerwehr",
"anzeige",
"feuerwehrgadgets"
] | Hobby & Makers > Other Ideas | [
"797863/images/image_1_compressed.jpg",
"797863/images/image_2_compressed.jpg"
] | [] | CC-BY | https://www.printables.com/model/797863 | data_0047.tar |
692774 | Apple TV Remote minimal stand v2 | <p>Hi, this is my Apple TV Remote stand, remodeled with cleaner lines and simple curves for a sleeker, minimalist look. The facade now slopes at the same 70<strong>°</strong> angle as the Apple TV remote for a clean profile. The recess has been redone for a snug and perfect fit. There are four 7mm recesses at the base ... | [
"apple",
"remotecontrol",
"appletv",
"appletvremote",
"remotecontrolholder"
] | Hobby & Makers > Organizers | [
"692774/images/image_1_compressed.jpg",
"692774/images/image_2_compressed.jpg",
"692774/images/image_3_compressed.jpg"
] | [
"692774/stls/appleTvRemoteStandv2.stl"
] | CC-BY | https://www.printables.com/model/692774 | data_0047.tar |
747428 | Aquarium Floating Plant Barrier | <p>Printed using PETG with 0% infill and 0.8 mm walls and top/bottom. Print the mount on its side with supports for the peg. Clearances are pretty big so it should be a loose fit and free to rotate.</p><p>You might need edits for the mount to fit your tank. </p><p>Update: added a 12 mm and 6 mm mount and parameter... | [
"floating",
"aquarium"
] | Household > Pets | [
"747428/images/image_1_compressed.jpg",
"747428/images/image_2_compressed.jpg",
"747428/images/image_3_compressed.jpg"
] | [
"747428/stls/connector.stl",
"747428/stls/floater.stl",
"747428/stls/mount-12mm.stl",
"747428/stls/mount-6mm.stl",
"747428/stls/mount.stl"
] | CC-BY | https://www.printables.com/model/747428 | data_0047.tar |
749836 | Aquarium water change diffuser | [
"aquarium",
"fish",
"fishtank",
"aquariumaccessories"
] | Household > Pets | [
"749836/images/image_1_compressed.jpg",
"749836/images/image_2_compressed.jpg"
] | [
"749836/stls/Aquarium water change diffuser.stl"
] | CC0 | https://www.printables.com/model/749836 | data_0047.tar | |
768271 | AR15/10 Vise Block | <p>This is a vise block similar to the Magpul BEV block. It uses your bolt carrier, bolt, and cam pin to allow you to attach to the barrel extension and torque barrel nuts or muzzle devices.</p><p>Please print with the cylinder facing down and support around the over hang. 4+ walls and 25-40% infill recommended.</p><p>... | [
"ar15",
"ar10"
] | Hobby & Makers > Mechanical Parts | [
"768271/images/image_1_compressed.jpg",
"768271/images/image_2_compressed.jpg",
"768271/images/image_3_compressed.jpg",
"768271/images/image_4_compressed.jpg",
"768271/images/image_5_compressed.jpg"
] | [
"768271/stls/armorer's vise AR10.stl",
"768271/stls/armorer's vise AR15.stl"
] | CC0 | https://www.printables.com/model/768271 | data_0047.tar |
781218 | Arca-Swiss tripod plate | <p>It is not much use on its own, but feel free to add your parts and attach them to a tripod!</p> | [
"tripod",
"arcaswiss"
] | Gadgets > Photo & Video | [
"781218/images/image_1_compressed.jpg"
] | [
"781218/stls/Arca-Swiss plate v1.stl"
] | CC-BY | https://www.printables.com/model/781218 | data_0047.tar |
802503 | Armanov casegauge funnel | <p>Remix of e_cubed99 awesome casegauge filler.</p><p>new bottom and hatch system to allow the gauge to be filled without the gauge underneath.</p><p>I used heatset inserts so that it would be easy to use new bottoms for filling for example ammoboxes</p><p>Hardware:</p><p>5pcs m3x12</p><p>5pcs m3 heatset inserts voron ... | [
"reloading",
"armanov"
] | Hobby & Makers > Tools | [
"802503/images/image_1_compressed.jpg"
] | [
"802503/stls/Bottom.stl",
"802503/stls/latch.stl",
"802503/stls/Top.stl"
] | CC-BY | https://www.printables.com/model/802503 | data_0047.tar |
672686 | Art the Clown Keychain | [
"art",
"horror",
"movie",
"clown",
"killer",
"slasher",
"terrifier"
] | Costumes & Accessories > Other Costume Accessories | [
"672686/images/image_1_compressed.jpg"
] | [
"672686/stls/Terrifier Keychain.stl"
] | CC0 | https://www.printables.com/model/672686 | data_0047.tar | |
807077 | Articulated Crayfish | <p>Model crayfish with 21 points of articulation.</p><p>I'm entering it in the #OnSuchAFullSea competition, though technically it's not a fish... and it's a freshwater animal not marine! Shhh, hopefully no one will notice!</p><p>The claws and tail segments are designed to use pieces of 1.75mm filament offcuts as hinges... | [
"articulatedanimal",
"crayfish"
] | Toys & Games > Other Toys & Games | [
"807077/images/image_1_compressed.jpg"
] | [
"807077/stls/Crayfish_Antennae.stl",
"807077/stls/Crayfish_Carapace.stl",
"807077/stls/Crayfish_LeftClaw.stl",
"807077/stls/Crayfish_LeftLegs.stl",
"807077/stls/Crayfish_RightClaw.stl",
"807077/stls/Crayfish_RightLegs.stl",
"807077/stls/Crayfish_Tail.stl",
"807077/stls/Crayfish_Underside.stl"
] | CC-BY | https://www.printables.com/model/807077 | data_0047.tar |
701403 | Articulated dog | <p>As part of my articulated animal series I present to you an articulated dog. The 3mf file was created in Bambu Studio so if it doesn't work for some reason just grab the stl.</p> | [
"dog",
"articulated",
"articulating",
"dogs",
"k9"
] | World & Scans > Animals | [
"701403/images/image_1_compressed.jpg"
] | [
"701403/stls/Articulated Dog.stl"
] | CC-BY | https://www.printables.com/model/701403 | data_0047.tar |
735879 | Astrophotography - Skywatcher Tripod Mount Adapter HEQ5 EQM35 EQ5 | <p>Easy way to mount Power Supplies, Small PCs, Focuser Controllers, Dew Heater Controllers or anything with a flat side.</p><p>Print vertically for extra strength around the clamping face, using 15% infill with PETG.</p><p>Will work on tripod legs between 44-45mm diameter - perfect for EQ5 or EQM35 Mounts.</p> | [
"tripod",
"astronomy",
"astrophotography",
"skywatcher",
"heq5",
"eqm35",
"astrophoto"
] | Gadgets > Photo & Video | [
"735879/images/image_1_compressed.jpg",
"735879/images/image_2_compressed.jpg",
"735879/images/image_3_compressed.jpg",
"735879/images/image_4_compressed.jpg"
] | [
"735879/stls/Tripod Leg Adapter Zip Tie v1.stl",
"735879/stls/TripodLeg30mm v2.stl"
] | GPL2.0 | https://www.printables.com/model/735879 | data_0047.tar |
808655 | Ateez light sign | <p>I used a Wemos D1 Mini to drive a led strip with gradually changing colors.</p><p> </p><p>One of the adapter tabs goes between unused pins on the D1 Mini to hold it in place while plugging in the usb cable.</p> | [
"sign",
"ledstrip",
"ateez",
"kpop"
] | Household > Home Decor | [
"808655/images/image_1_compressed.jpg",
"808655/images/image_2_compressed.jpg",
"808655/images/image_3_compressed.jpg"
] | [
"808655/stls/ateez_text.stl",
"808655/stls/ateez_text_frame.stl",
"808655/stls/back_panel.stl",
"808655/stls/D1_mini_holder.stl",
"808655/stls/diffuser.stl",
"808655/stls/frame.stl"
] | CC0 | https://www.printables.com/model/808655 | data_0047.tar |
737966 | Attack on Titan walls | [
"aot"
] | Art & Design > Other Art & Designs | [
"737966/images/image_1_compressed.jpg"
] | [
"737966/stls/shapr3d_export_2024-01-25_20h59m_Importato.stl"
] | CC0 | https://www.printables.com/model/737966 | data_0047.tar | |
670976 | Baby Foot Cookie Cutter 02cm - 10cm | [
"foot",
"baby",
"cookiecutter",
"babyfoot",
"christening"
] | Household > Kitchen | [
"670976/images/image_1_compressed.jpg"
] | [
"670976/stls/BabyFoot_02cm.stl",
"670976/stls/BabyFoot_03cm.stl",
"670976/stls/BabyFoot_04cm.stl",
"670976/stls/BabyFoot_05cm.stl",
"670976/stls/BabyFoot_06cm.stl",
"670976/stls/BabyFoot_07cm.stl",
"670976/stls/BabyFoot_08cm.stl",
"670976/stls/BabyFoot_09cm.stl",
"670976/stls/BabyFoot_10cm.stl"
] | CC-BY | https://www.printables.com/model/670976 | data_0047.tar | |
725712 | Baby Groot (sitting and waving) | <p>A 2 piece model of baby groot sitting and additional model of him waving</p><p> </p> | [
"sitting",
"marvel",
"groot",
"wood"
] | Art & Design > Other Art & Designs | [
"725712/images/image_1_compressed.jpg",
"725712/images/image_2_compressed.jpg",
"725712/images/image_3_compressed.jpg",
"725712/images/image_4_compressed.jpg"
] | [
"725712/stls/Body_high_detail.stl",
"725712/stls/Head_with_brim_high_detail.stl",
"725712/stls/Waving_Groot_15.5cm.stl"
] | CC0 | https://www.printables.com/model/725712 | data_0047.tar |
767618 | Baby groot key chain | [
"cute",
"miniature",
"groot",
"minimalist",
"keychain",
"key",
"keyring",
"fastprint",
"llavero",
"babygroot",
"dualcolor",
"minimalistic",
"llaveros"
] | Costumes & Accessories > Props | [
"767618/images/image_1_compressed.jpg",
"767618/images/image_2_compressed.jpg"
] | [
"767618/stls/all in one.stl",
"767618/stls/base (part 1-2).stl",
"767618/stls/top (part 2-2).stl"
] | CC-BY | https://www.printables.com/model/767618 | data_0047.tar | |
788804 | Backgammon travel edition | <p>A minimalist travel backgammon board that stores its checkers in dedicated are in a closed pack.</p><p>The design uses 4 colors, but can be downgraded to two colors only.</p><p>For the board filament (white in my example) suggest to use non translucent material so the internal design wont be visible when the pack is... | [
"boardgames",
"backgammon"
] | Toys & Games > Board Games | [
"788804/images/image_1_compressed.jpg",
"788804/images/image_2_compressed.jpg",
"788804/images/image_3_compressed.jpg",
"788804/images/image_4_compressed.jpg"
] | [
"788804/stls/Backgammon V2 v8.stl"
] | CC0 | https://www.printables.com/model/788804 | data_0047.tar |
664362 | BAHCO Combination Square Holder for Ikea Skadis, CS150, CS300 | <p>This is <strong>a holder for BAHCO sliding combination squares </strong><a href="https://www.bahco.com/int_en/sliding-combination-square-with-metal-scriber-150-mm-cs150.html"><strong>CS150</strong></a><strong> and </strong><a href="https://www.bahco.com/int_en/sliding-combination-square-with-metal-scriber-300-mm-cs3... | [
"tool",
"ikea",
"tools",
"toolholder",
"skadis",
"square",
"ikeaskadis",
"ikeauppspel",
"uppspel",
"bahco",
"combinationsquare",
"6d6178",
"skadistnut"
] | Hobby & Makers > Tools | [
"664362/images/image_1_compressed.jpg",
"664362/images/image_2_compressed.jpg",
"664362/images/image_3_compressed.jpg"
] | [
"664362/stls/Skadis BAHCO CS150 Holder Double.stl",
"664362/stls/Skadis BAHCO CS150 Holder Single.stl",
"664362/stls/Skadis BAHCO CS300 Holder.stl"
] | CC-BY | https://www.printables.com/model/664362 | data_0047.tar |
788664 | Bahtinov Mask for Celestron NexStar 127SLT | <p>This is a Bahtinov mask (<a href="https://en.wikipedia.org/wiki/Bahtinov_mask">Wikipedia</a>) for <a href="https://www.celestron.com/products/nexstar-127slt-computerized-telescope">Celestron NexStar 127SLT</a> which makes it easier to focus the telescope for the clearest image. This is especially important for astro... | [
"telescope",
"astronomy",
"astrophotography",
"focus",
"celestron",
"telescopeaccessory",
"bahtinovmask",
"bahtinov"
] | Learning > Physics & Astronomy | [
"788664/images/image_1_compressed.jpg",
"788664/images/image_2_compressed.jpg"
] | [
"788664/stls/Bahtinov_Celestron_NexStar_127SLT_147mm.stl"
] | CC0 | https://www.printables.com/model/788664 | data_0047.tar |
746864 | Ball pyramid puzzle | <p>It consists of forming a tetrahedron with these 4 pieces</p>
<h3>Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Creality</p>
<p class="detail-setting printer"><strong>Printer: </strong>
<div><p>Ender 3</p></div>
<p><strong>Rafts:</strong></p>
<p>Yes</p>
<p class="detail-setting supports"><strong>Suppo... | [
"puzzle",
"ball",
"3dpuzzle",
"pyramid",
"thingiverse",
"piramid",
"piramide"
] | Toys & Games > Puzzles & Brain-teasers | [
"746864/images/image_1_compressed.jpg",
"746864/images/image_2_compressed.jpg",
"746864/images/image_3_compressed.jpg"
] | [
"746864/stls/puzzle_piramide.stl"
] | CC-BY | https://www.printables.com/model/746864 | data_0047.tar |
702708 | Bambu Filametrix Printhead for Voron Stealthburner | <p>This is a remix of Ibot_3D's excellent Voron Stealthburner printhead for the Bambu hotend. Changes include adding support for Filametrix, moving the wire path out of the way of the filament cutter, and tightening the slot for the hotend's heatsink to eliminate a minor gap and potential for wobble. Some o... | [] | 3D Printers > Voron Parts & Upgrades | [
"702708/images/image_1_compressed.jpg",
"702708/images/image_2_compressed.jpg",
"702708/images/image_3_compressed.jpg",
"702708/images/image_4_compressed.jpg"
] | [
"702708/stls/Filametrix-Bambu-Front-v2.stl",
"702708/stls/Filametrix-Bambu-Rear-v2.stl"
] | GPL3.0 | https://www.printables.com/model/702708 | data_0047.tar |
785700 | Bambu Grease Gridfinity w/ Squeezer | <p>Holds the packets of grease and/or thermal paste that comes with the printer. Additionally, 2 slots for squeezers such as <a href="https://www.printables.com/model/556401-bambu-lab-thermal-grease-squeezer">this one by mozWORLD</a>. </p> | [
"gridfinity",
"bambulab"
] | 3D Printers > Bambu Lab Parts & Upgrades | [
"785700/images/image_1_compressed.jpg"
] | [
"785700/stls/BambuGreaseWSqueezer.stl"
] | CC-BY | https://www.printables.com/model/785700 | data_0047.tar |
702462 | Bambu Lab A1 mini Poop Bucket | <p>Minimalist Poop Bucket for Bambu Lab A1 mini<br>Dimensions - <strong>120×120×150 mm</strong></p><p> </p><p><strong>poopbucket-thin</strong> - made to be printed as fast as possible and to use as least material as possible. Walls are only <strong>1mm</strong> thick, so it's possible they will deform.</p><p><stro... | [
"wastebin",
"poopbucket",
"a1mini"
] | 3D Printers > Bambu Lab Parts & Upgrades | [
"702462/images/image_1_compressed.jpg",
"702462/images/image_2_compressed.jpg",
"702462/images/image_3_compressed.jpg"
] | [
"702462/stls/poopbucket-thick.stl",
"702462/stls/poopbucket-thin.stl"
] | CC-BY | https://www.printables.com/model/702462 | data_0047.tar |
693790 | Bambu Lab P1S Magnet Mount 3" Duct | <p>This is a magnetic mount 3" duct 45-degree elbow for the Bambu Lab P1S. </p><p>There is a mount plate to help aligning the elbow. The mount plate is screwed into the three holes around the exhaust fan on the back panel. I tapped those holes to M3 and used M3 x 8mm BHCS.</p><p>Since the elbow has ma... | [] | 3D Printers > Bambu Lab Parts & Upgrades | [
"693790/images/image_1_compressed.jpg",
"693790/images/image_2_compressed.jpg"
] | [
"693790/stls/duct-mag-mount-3in-right-left.stl",
"693790/stls/duct-mag-mount-3in-up-down.stl",
"693790/stls/exhaust-mag-mount.stl"
] | CC-BY | https://www.printables.com/model/693790 | data_0047.tar |
668206 | Bambu Lab Purge Bucket | <p>One more purge bucket design proposal for Bambu Lab Printers – inspired by the design of the P1S and X1 printers themselves and several other purge bucket designs on the net.</p><p>Tall enough to stand on the desk behind the printer, slim footprint to take up only little space. Held to the metal back of the printer ... | [
"poop",
"bucket",
"purge",
"purgebucket",
"bambu",
"bambulab",
"poopbucket"
] | 3D Printers > Bambu Lab Parts & Upgrades | [
"668206/images/image_1_compressed.jpg",
"668206/images/image_2_compressed.jpg",
"668206/images/image_3_compressed.jpg"
] | [
"668206/stls/Bambu Purge Bucket v08.stl"
] | CC-BY | https://www.printables.com/model/668206 | data_0047.tar |
699644 | Bambu Lab Reusable Spool Model | <p>This is a model of the reusable filament spool that Bambu Lab ships with its printers and filaments.</p><p>This model is created by taking measurements directly from an empty spool. I only use this model to design accessories which should be compatible with Bambu Lab's spools.</p><p> </p><h4>Disclaimer</h4><p>T... | [
"spool",
"reusable",
"bambulab"
] | 3D Printers > Accessories | [
"699644/images/image_1_compressed.jpg",
"699644/images/image_2_compressed.jpg",
"699644/images/image_3_compressed.jpg"
] | [
"699644/stls/Bambu_Spool_Lower.stl",
"699644/stls/Bambu_Spool_Upper.stl"
] | CC0 | https://www.printables.com/model/699644 | data_0047.tar |
745828 | Bambu Lab tools box organizer | <p>Mini organizer for tools that are included in bambu lab's accessory box and other tools you can print like lube help or brush.</p> | [
"organizer",
"accessory",
"tools",
"bambu",
"bambulab",
"a1mini"
] | Hobby & Makers > Organizers | [
"745828/images/image_1_compressed.jpg",
"745828/images/image_2_compressed.jpg",
"745828/images/image_3_compressed.jpg",
"745828/images/image_4_compressed.jpg",
"745828/images/image_5_compressed.jpg",
"745828/images/image_6_compressed.jpg",
"745828/images/image_7_compressed.jpg",
"745828/images/image_8... | [
"745828/stls/Bambu_organizer.stl",
"745828/stls/Base.stl"
] | CC-BY | https://www.printables.com/model/745828 | data_0047.tar |
775839 | Bambu Labs P1S - Mount for the Arducam IMX708/Raspberry Pi Camera | <p>This is a mount that's designed to house an IMX708/Raspberry Pi camera inside a Bambu Labs P1S 3d printer. I measured it all up with the IMX708m but it should also work with the stock RasPi camera module. Once you've got the video set up on the Pi you can monitor it in Home Assistant or whatever you want. </p>... | [
"camera",
"mount",
"raspberry",
"housing",
"3dprinter",
"raspberrypi",
"raspberrypicamera",
"arducam",
"bambulab",
"p1s",
"p1smods",
"imx708"
] | 3D Printers > Bambu Lab Parts & Upgrades | [
"775839/images/image_1_compressed.jpg",
"775839/images/image_2_compressed.jpg",
"775839/images/image_3_compressed.jpg",
"775839/images/image_4_compressed.jpg",
"775839/images/image_5_compressed.jpg"
] | [
"775839/stls/ArduCam Mount for BambulabsP1S v6.stl"
] | CC-BY | https://www.printables.com/model/775839 | data_0047.tar |
656214 | Bambubox Toolbox | <p>Diese Toolbox ist ein wenig an die alten US Werkzeugkisten angelehnt, und inspiriert von der Vitra Toolbox gestaltet von Erik Levy. Die Größe ist so gewählt das sie entspannt auf eine Bambulab X1C oder P1p Buildplate passt. Happy printing….. :-) </p><p>Update: Griff leicht verstärkt, support gegendurchhängend i... | [
"toolbox",
"organization",
"werkzeugkiste",
"bambulab",
"bambubox"
] | Hobby & Makers > Tools | [
"656214/images/image_1_compressed.jpg",
"656214/images/image_2_compressed.jpg",
"656214/images/image_3_compressed.jpg"
] | [
"656214/stls/bambubox_neu_box.stl",
"656214/stls/bambubox_neu_einlegeplatte.stl",
"656214/stls/boxy_02.stl"
] | CC-BY | https://www.printables.com/model/656214 | data_0047.tar |
754259 | BambuLab Logo | <p>Simple stl of the BambuLab logo. To use the logo, open an object you want to print in a slicer of your choosing, then import the BambuLab logo stl and affix it to a surface in the slicer where it will be added to the printed model.</p> | [
"logo",
"bambulab"
] | Art & Design > 2D Plates & Logos | [
"754259/images/image_1_compressed.jpg"
] | [
"754259/stls/BambuLabLogo.stl"
] | CC-BY | https://www.printables.com/model/754259 | data_0047.tar |
678890 | BambuLab Scaper | [] | 3D Printers > Bambu Lab Parts & Upgrades | [
"678890/images/image_1_compressed.jpg"
] | [
"678890/stls/BambuLab Scraper - logo.stl",
"678890/stls/BambuLab Scraper - Scaper.stl",
"678890/stls/BambuLab Scraper.stl"
] | CC0 | https://www.printables.com/model/678890 | data_0047.tar | |
773832 | Bambulab X1 Carbon Plate Holder | <p>This is another plate holder for the Bambulab X1 Carbon - it can hold up to two plates with a max. of 1.2mm width. </p><p> </p><p>The holder is being clamped by pushing under the printer itself, there it sits rock solid.</p><p> </p><p>Have fun with it. </p> | [] | 3D Printers > Bambu Lab Parts & Upgrades | [
"773832/images/image_1_compressed.jpg",
"773832/images/image_2_compressed.jpg",
"773832/images/image_3_compressed.jpg",
"773832/images/image_4_compressed.jpg"
] | [] | CC0 | https://www.printables.com/model/773832 | data_0047.tar |
734766 | Banana Cookie Cutter | <h3><strong>Description:</strong></h3><p>Total dimensions are approximately 130x66x28mm, the cutting dimensions are 115x55x17mm. Feel free to edit using a provided .step file.</p><h3><strong>Materials:</strong> </h3><p>Print the cookie cutter in food-safe PLA (Polylactic Acid) filament. PLA is a non-toxic material... | [
"cookie",
"cookiecutter"
] | Household > Kitchen | [
"734766/images/image_1_compressed.jpg",
"734766/images/image_2_compressed.jpg"
] | [
"734766/stls/Banana Cookie Cutter - 130x66x28mm.stl"
] | CC0 | https://www.printables.com/model/734766 | data_0047.tar |
744107 | bananasong (banana butterfly knife) | <p>this butterfly knife that looks like a banana only requires 3 separate prints that clip together with ease.</p> | [
"banana",
"butterflyknife",
"bananasong"
] | Toys & Games > Other Toys & Games | [
"744107/images/image_1_compressed.jpg",
"744107/images/image_2_compressed.jpg",
"744107/images/image_3_compressed.jpg",
"744107/images/image_4_compressed.jpg",
"744107/images/image_5_compressed.jpg"
] | [
"744107/stls/bananasong handle x2.stl",
"744107/stls/half bananasong blade x2.stl",
"744107/stls/whole bananasong blade.stl"
] | CC0 | https://www.printables.com/model/744107 | data_0047.tar |
754306 | Barbie Girl Profile | <p>This is a barbie profile I used for a birthcake for a niece. Easy to printe and size up to your need.</p> | [
"barbie",
"profile"
] | Art & Design > 2D Plates & Logos | [
"754306/images/image_1_compressed.jpg"
] | [
"754306/stls/BarbieGirlProfile.stl"
] | CC-BY | https://www.printables.com/model/754306 | data_0047.tar |
703401 | Bari the Lamb | <ul><li><strong>Material: </strong><a href="https://www.prusa3d.com/product/prusament-pla-vanilla-white-1kg/">Prusament PLA Vanilla White 1kg</a></li><li><strong>Layerheight</strong>: 0.20mm (SPEED)</li><li><strong>Support:</strong> Not necessary but use automatic paint for better result</li><li><strong>Support Style:<... | [
"toy",
"decoration",
"scan",
"animal",
"decor",
"cute",
"sculpt",
"sculpture",
"garden",
"decorations",
"decorative",
"scanned",
"lamb",
"bari"
] | Art & Design > Sculptures | [
"703401/images/image_1_compressed.jpg",
"703401/images/image_2_compressed.jpg"
] | [
"703401/stls/bari_the_lamb.stl"
] | CC-BY | https://www.printables.com/model/703401 | data_0047.tar |
750121 | Base for Lego Art | <p>I made this for my wife's The Great Wave set after it fell off a shelf and put a decent sized dent in my hardwood floor. It will fit other sets from the Lego Art Collection, but some sets need slight modification for a nice aesthetic because the border of each set are different thicknesses. See pics for the dimensio... | [
"art",
"wave",
"base",
"lego",
"great",
"greatwave"
] | Art & Design > Other Art & Designs | [
"750121/images/image_1_compressed.jpg",
"750121/images/image_2_compressed.jpg",
"750121/images/image_3_compressed.jpg",
"750121/images/image_4_compressed.jpg"
] | [
"750121/stls/Lego Art Base.stl"
] | CC0 | https://www.printables.com/model/750121 | data_0047.tar |
649675 | Base for Snowglobe Votive Ornament - Winter Cabin | <p>I printed Snowglobe Votive Ornament - Winter Cabin available at <a href="https://www.printables.com/model/325716-snowglobe-votive-ornament-winter-cabin">https://www.printables.com/model/325716-snowglobe-votive-ornament-winter-cabin</a> and put a tealight in it. It looks and works great but our tealights where thick ... | [
"christmas"
] | Seasonal designs > Winter & Christmas & New Year's | [
"649675/images/image_1_compressed.jpg",
"649675/images/image_2_compressed.jpg",
"649675/images/image_3_compressed.jpg"
] | [
"649675/stls/Snowglobe Ornament Base.stl"
] | CC-BY | https://www.printables.com/model/649675 | data_0047.tar |
685906 | Baseball holder | [] | Art & Design > Other Art & Designs | [
"685906/images/image_1_compressed.jpg",
"685906/images/image_2_compressed.jpg",
"685906/images/image_3_compressed.jpg"
] | [
"685906/stls/baseball stand.stl"
] | GPL2.0 | https://www.printables.com/model/685906 | data_0047.tar | |
790631 | Basketball bin | <p>Hi,</p><p>Today I made a project of a basketball-style trash can. You can print without supports. And basketball inner you can print in vase mode.</p> | [
"sport",
"fun",
"bin",
"hoop",
"basketball"
] | Sports & Outdoor > Outdoor Sports | [
"790631/images/image_1_compressed.jpg",
"790631/images/image_2_compressed.jpg",
"790631/images/image_3_compressed.jpg",
"790631/images/image_4_compressed.jpg",
"790631/images/image_5_compressed.jpg"
] | [
"790631/stls/Basket inner.stl",
"790631/stls/Basket.stl",
"790631/stls/Hoop.stl"
] | CC-BY | https://www.printables.com/model/790631 | data_0047.tar |
769787 | Bath shark | <p>This is a toy shark for your bath. The dimentions are 45 x 103 x 31 but you can make it ass big or small. I recommend you pant the eyes so it stands out. It is twistable. </p> | [
"toy",
"bath",
"bathroom",
"shark",
"tub"
] | Household > Bathroom | [
"769787/images/image_1_compressed.jpg",
"769787/images/image_2_compressed.jpg",
"769787/images/image_3_compressed.jpg",
"769787/images/image_4_compressed.jpg",
"769787/images/image_5_compressed.jpg"
] | [
"769787/stls/Bath tub shark-2.stl"
] | CC0 | https://www.printables.com/model/769787 | data_0047.tar |
797834 | Bath Tokens - Spirited Away (Studio Ghibli) | <p>8 different tokens from the Studio Ghibli animated film, Spirited Away. </p><p>These were made to be smaller, and work really well as a keychain, feel free to size them up with a scaling tool in your slicer if you want a larger version. </p><p>If you'd like a more hand-sized version, try scaling X and Y to... | [
"bath",
"studio",
"token",
"ghibli",
"boiler",
"away",
"chihiro",
"spirited",
"boilerman",
"kamaji"
] | Art & Design > Other Art & Designs | [
"797834/images/image_1_compressed.jpg",
"797834/images/image_2_compressed.jpg",
"797834/images/image_3_compressed.jpg",
"797834/images/image_4_compressed.jpg",
"797834/images/image_5_compressed.jpg"
] | [
"797834/stls/All tokens V2.stl",
"797834/stls/All tokens V3.stl",
"797834/stls/All tokens.stl",
"797834/stls/bath tokens v4.stl"
] | CC0 | https://www.printables.com/model/797834 | data_0047.tar |
781870 | Bath Toy Torpedo | <p>Print with 0% infill to give the torpedo the necessary weight to sink.</p> | [] | Toys & Games > Other Toys & Games | [
"781870/images/image_1_compressed.jpg"
] | [
"781870/stls/torpedo.stl"
] | CC0 | https://www.printables.com/model/781870 | data_0047.tar |
770509 | Bathtub Slide | <p>No supports!</p><p>This slide was designed to be used with suction cups. I tested it with the suction cups I purchased on Amazon <a href="https://www.amazon.com/dp/B0BXJF5H48">here</a>.</p><p>I designed my <a href="https://www.printables.com/model/768438-bath-time-sailboat">sailboat model</a> model around this slide... | [
"toy",
"boat",
"bathtub",
"bath",
"fun",
"slide",
"bathtime",
"bathing",
"bathtoy",
"bathtubtoy",
"tubtoy",
"bathslide",
"bathtubslide",
"funslide",
"bathfun"
] | Toys & Games > Other Toys & Games | [
"770509/images/image_1_compressed.jpg",
"770509/images/image_2_compressed.jpg",
"770509/images/image_3_compressed.jpg",
"770509/images/image_4_compressed.jpg"
] | [
"770509/stls/Bathtub Slide.stl"
] | CC-BY | https://www.printables.com/model/770509 | data_0047.tar |
810467 | Battery Buddy 9V | [] | Toys & Games > Building Toys | [
"810467/images/image_1_compressed.jpg"
] | [
"810467/stls/ball (8x).stl",
"810467/stls/Buddy.stl",
"810467/stls/Chest.stl",
"810467/stls/foot (2x).stl",
"810467/stls/hand (2x).stl",
"810467/stls/lower limb (4x).stl",
"810467/stls/upper limb (4x).stl",
"810467/stls/Waist.stl"
] | CC-BY | https://www.printables.com/model/810467 | data_0047.tar | |
718745 | battery holder - Parkside | [
"parkside",
"parksidebattery",
"parksideholder"
] | Hobby & Makers > Tools | [
"718745/images/image_1_compressed.jpg",
"718745/images/image_2_compressed.jpg"
] | [
"718745/stls/parkside-baterie.stl"
] | CC-BY | https://www.printables.com/model/718745 | data_0047.tar | |
679185 | Bauble ornaments | <p>I made ornaments from popular scraps</p><p>Bauble 80x80x4</p><p> </p><p>EDIT: FIXED FREE ELEMENTS BAUBLE 2 AND 3</p> | [
"decoration",
"christmas",
"home",
"ornament",
"xmas",
"bauble"
] | Seasonal designs > Winter & Christmas & New Year's | [
"679185/images/image_1_compressed.jpg",
"679185/images/image_2_compressed.jpg"
] | [
"679185/stls/bauble ornament 2.stl",
"679185/stls/bauble ornament 3.stl",
"679185/stls/bauble ornament 4.stl",
"679185/stls/bauble ornament.stl"
] | CC0 | https://www.printables.com/model/679185 | data_0047.tar |
803542 | Bauer Angled Battery Mount | <p>This is a simple remix of an existing bauer battery holder, which I've used for storing batteries on the undersides of shelves, but for wall mounting, vertical clearance became an issue when removing the batteries. Angling the batteries made it easier to store the batteries in a tighter cluster.</p><p>1.5, 3, ... | [
"bauer"
] | Hobby & Makers > Tools | [
"803542/images/image_1_compressed.jpg"
] | [
"803542/stls/Bauer Angled Battery Hanger.stl"
] | CC-BY | https://www.printables.com/model/803542 | data_0047.tar |
742369 | Bauer Battery Charger Wall Mount Base | <p>Simple replacement base for the 1.7A Bauer battery charger that comes with the drill/charger/battery combo. Adds the ability to wall mount. I matched the contours enough to have it snap together. I didn't bother transferring the vent holes in the base since there are holes in the top. </p><p>... | [
"bauer",
"chargermount"
] | Hobby & Makers > Tools | [
"742369/images/image_1_compressed.jpg"
] | [
"742369/stls/Bauer Bottom Plate.stl"
] | CC-BY | https://www.printables.com/model/742369 | data_0047.tar |
659360 | Bayonet | [
"bayonet"
] | Costumes & Accessories > Props | [
"659360/images/image_1_compressed.jpg"
] | [
"659360/stls/b.stl"
] | CC0 | https://www.printables.com/model/659360 | data_0047.tar | |
782451 | Bed Levelling | [
"levelling",
"nivel"
] | Learning > Other 3D Objects for Learning | [
"782451/images/image_1_compressed.jpg"
] | [
"782451/stls/Bed_leveling.stl"
] | CC0 | https://www.printables.com/model/782451 | data_0047.tar | |
717366 | Bed Shelf | <p>I made this bedside shelf model for placing my iPhone and AirPods. This model consists of two parts to ensure easy printing. I printed both components in an upside down orientation.<br><br>The design includes a clip for furniture with a thickness of 3.5 cm.<br>I included the Fusion360 file so you can modify the clip... | [
"shelf",
"phone",
"bed",
"phoneholder"
] | Household > Bedroom | [
"717366/images/image_1_compressed.jpg",
"717366/images/image_2_compressed.jpg",
"717366/images/image_3_compressed.jpg",
"717366/images/image_4_compressed.jpg"
] | [
"717366/stls/Shelf border.stl",
"717366/stls/Shelf.stl"
] | CC-BY | https://www.printables.com/model/717366 | data_0047.tar |
658122 | Benchy Filament Holder | <p>A decoration for one of your Benchies and a key chain option.</p><p>No supports. 15% infill. 0.2 layers for all parts except the filament which should use 0.01 for more detail. Setting the layer pattern to “concentric” will yield a cleaner look.</p><p>If you have issues with the holder it may be temperature related.... | [
"benchy",
"benchyboat"
] | 3D Printers > Test Models | [
"658122/images/image_1_compressed.jpg",
"658122/images/image_2_compressed.jpg",
"658122/images/image_3_compressed.jpg",
"658122/images/image_4_compressed.jpg",
"658122/images/image_5_compressed.jpg",
"658122/images/image_6_compressed.jpg",
"658122/images/image_7_compressed.jpg",
"658122/images/image_8... | [
"658122/stls/spool-1.stl",
"658122/stls/spool-2_noRing.stl",
"658122/stls/spool-2_withRing.stl",
"658122/stls/spool-3_roll.stl",
"658122/stls/spoolholder.stl"
] | CC-BY | https://www.printables.com/model/658122 | data_0047.tar |
749327 | Berserk Keyring (no MMU needed) | <p>Another keyring of the brand of sacrifice from Berserk. Manual color change on layer 10.</p> | [
"keyring",
"berserk",
"guts",
"griffith"
] | Toys & Games > Other Toys & Games | [
"749327/images/image_1_compressed.jpg"
] | [
"749327/stls/BrandOfSacrifice3MF.stl",
"749327/stls/BrandOfSacrificeSTL.stl"
] | CC-BY | https://www.printables.com/model/749327 | data_0047.tar |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.