model_id stringlengths 1 7 | name stringlengths 2 210 | description stringlengths 0 253k | tags listlengths 0 494 | printables_category stringclasses 80
values | image_paths listlengths 0 289 | stl_paths listlengths 0 2.73k | license stringclasses 7
values | source stringlengths 34 40 | shard_file stringclasses 49
values |
|---|---|---|---|---|---|---|---|---|---|
689543 | stick man logo | <p>print with the best settings you have.</p><p>( i didn't write a lot because i'm just a kid.)</p> | [] | Art & Design > 2D Plates & Logos | [
"689543/images/image_1_compressed.jpg"
] | [
"689543/stls/stick man.stl"
] | CC-BY | https://www.printables.com/model/689543 | data_0048.tar |
248157 | Stick on Sunglasses Hanger | <p>A simple sunglasses hanger</p> | [
"sunglassesholder",
"sunglassess"
] | Hobby & Makers > Organizers | [
"248157/images/image_1_compressed.jpg"
] | [
"248157/stls/Sunglass Hanger - 316.50 mm.stl"
] | CC-BY | https://www.printables.com/model/248157 | data_0048.tar |
823094 | Sticker organizer | <p>I bought a pack of stickers and wanted to organize them by brand. I made this organizer with eight slots and it's perfect for my needs.</p> | [
"stand",
"sticker"
] | Hobby & Makers > Organizers | [
"823094/images/image_1_compressed.jpg",
"823094/images/image_2_compressed.jpg",
"823094/images/image_3_compressed.jpg",
"823094/images/image_4_compressed.jpg"
] | [
"823094/stls/Sticker stand v1.stl"
] | CC-BY | https://www.printables.com/model/823094 | data_0048.tar |
556864 | Sticky Note Holder with List Template & Pen Holder | <h4>Description</h4><p>A sticky note holder with a quick template to make sharp checklists, with holders for two pens/pencils, and designated spots for rubber feet.</p><p>Holds a standard sized post-it note pad, plus two pens. Template slides in vertically through the slot in the base bottom, and rests on top of the pa... | [
"office",
"desk",
"desktop",
"pencil",
"pen",
"penholder",
"organization",
"pencilholder",
"template",
"sticky",
"writing",
"note",
"postit",
"notes",
"officesupplies",
"officeorganization",
"postitnotes",
"stickynotesholder",
"deskorganiser",
"todolist",
"stickynote",
"pen... | Household > Office | [
"556864/images/image_1_compressed.jpg",
"556864/images/image_10_compressed.jpg",
"556864/images/image_2_compressed.jpg",
"556864/images/image_3_compressed.jpg",
"556864/images/image_4_compressed.jpg",
"556864/images/image_5_compressed.jpg",
"556864/images/image_6_compressed.jpg",
"556864/images/image_... | [
"556864/stls/stickyNoteBase&TemplateR4.stl",
"556864/stls/stickyNoteBase-R1-boringNoHex.stl",
"556864/stls/stickyNoteBase-R1-hex.stl",
"556864/stls/stickyNoteBase-R2.stl",
"556864/stls/stickyNoteBaseR2&TemplateR5.stl",
"556864/stls/stickyNoteBaseR2&TemplateR6.stl",
"556864/stls/stickyNoteTemplate-R1.stl... | CC-BY | https://www.printables.com/model/556864 | data_0048.tar |
235202 | STIHL BGA 57 wall mount | <p>Modeled a simple wall mount to hold the STIHL BGA 57 Leaf blower.<br>Printed in Prusament PETG</p> | [
"wall",
"mount",
"wallmount",
"stihl"
] | Household > Outdoor & Garden | [
"235202/images/image_1_compressed.jpg",
"235202/images/image_2_compressed.jpg"
] | [
"235202/stls/Wallmount_StihlBGA_57.stl"
] | CC-BY | https://www.printables.com/model/235202 | data_0048.tar |
1239336 | Stitch Bead | [
"stitch",
"bead"
] | 3D Printers > Accessories | [
"1239336/images/image_1_compressed.jpg"
] | [
"1239336/stls/stitch bead.stl"
] | CC0 | https://www.printables.com/model/1239336 | data_0048.tar | |
1358632 | Stitch Headband | <p>Step into the world of Lilo & Stitch with this original 3D printable headband inspired by everyone’s favorite alien, Stitch! The model is designed for easy printing on standard FDM printers and offers a comfortable fit. The ears are carefully shaped and ready for multicolor printing – the iconic blue and pink ar... | [
"toy",
"party",
"cosplay",
"disney",
"alien",
"headband",
"lilo",
"ears",
"stitch",
"stitchears"
] | Fashion > Women | [
"1358632/images/image_1_compressed.jpg",
"1358632/images/image_2_compressed.jpg",
"1358632/images/image_3_compressed.jpg",
"1358632/images/image_4_compressed.jpg",
"1358632/images/image_5_compressed.jpg",
"1358632/images/image_6_compressed.jpg",
"1358632/images/image_7_compressed.jpg",
"1358632/images... | [
"1358632/stls/PS Stitch headband 2C.stl",
"1358632/stls/Stitch headband A.stl",
"1358632/stls/Stitch headband AS.stl",
"1358632/stls/Stitch headband AS3.stl",
"1358632/stls/Stitch headband AS3L.stl",
"1358632/stls/Stitch headband AS3R.stl",
"1358632/stls/Stitch headband B.stl",
"1358632/stls/Stitch he... | CC-BY | https://www.printables.com/model/1358632 | data_0048.tar |
1022022 | Stitch toothpaste vomit |
<p>can fit Colgate and elmex Toothpaste. Haven't printed it yet. Please comment if there are any issues</p>
Category: Bathroom
| [
"cap",
"bathroom",
"toothpaste",
"thingiverse",
"toothpastesqueezer",
"bathroomaccessories",
"lilostitch",
"liloandstitch",
"stitch"
] | Household > Bathroom | [
"1022022/images/image_1_compressed.jpg",
"1022022/images/image_2_compressed.jpg",
"1022022/images/image_3_compressed.jpg"
] | [
"1022022/stls/Toothpaste_1.stl"
] | CC-BY | https://www.printables.com/model/1022022 | data_0048.tar |
782348 | STLink v3 Back cover | <p>STLink V3 back cover replacement</p> | [
"stlink",
"stlinkv3"
] | Hobby & Makers > Other Ideas | [
"782348/images/image_1_compressed.jpg"
] | [
"782348/stls/StLinkV3.stl"
] | CC0 | https://www.printables.com/model/782348 | data_0048.tar |
573734 | Stojánek na Albi tužku - zjednodušené dno | <p>Stojánek na Albi tužku - zjednodušené dno. Originál házel ve sliceru chybu.</p> | [
"stand",
"stojan",
"stojanek",
"tuzka",
"albi"
] | Household > Other House Equipment | [
"573734/images/image_1_compressed.jpg"
] | [
"573734/stls/albi tuzka stojan-zjednoduseni dna.stl"
] | CC0 | https://www.printables.com/model/573734 | data_0048.tar |
306669 | Stomp Rocket | <p>This is a remix of Desktop Stomp Rocket & Glider - Angled Launcher<br>by LoboCNC [https://www.thingiverse.com/thing:5228007]. I made this in OpenSCAD for easy customization.</p><p>This prints well on a Prusa Mini. If the tolerance is too loose / tight, adjust the value of "space" accordingly. A slightly too loos... | [
"rocket",
"stomp"
] | Toys & Games > Vehicles | [
"306669/images/image_1_compressed.jpg",
"306669/images/image_2_compressed.jpg",
"306669/images/image_3_compressed.jpg"
] | [
"306669/stls/rocket.03.stl",
"306669/stls/rocket.base.45degr.03.stl",
"306669/stls/rocket.base.60degr.03.stl",
"306669/stls/rocket.base.90degr.03.stl",
"306669/stls/rocket.plunger.03.stl",
"306669/stls/rocket.rockets_x2.03.stl"
] | CC-BY | https://www.printables.com/model/306669 | data_0048.tar |
113490 | Stonks with Meme Man head | <p>In honor of the “stonks" meme, here is a simple model that has Meme Man's head on a rising arrow coming out of the word stonks. </p><p>Attribution for Meme Man head model:</p><ul><li>Author: ETGgames</li><li>License: CC Attribution</li><li>Title: Meme Man / Mr. Succ</li><li>Link: <a href="https://sketchfab.com/... | [
"sign",
"art",
"meme"
] | Art & Design > 2D Plates & Logos | [
"113490/images/image_1_compressed.jpg"
] | [
"113490/stls/stonks v1.stl"
] | CC-BY | https://www.printables.com/model/113490 | data_0048.tar |
991049 | Stopper for IKEA MULIG wardrobe stand / Garderobenständer | <p>A simple attachment to enlarge the standard stoppers. So that nothing can fall off when browsing.</p><p>Prints easy without support and 15% infill.</p><p>Update 04.04.2025 V2 is now scalled in millimeters and not meters.</p> | [
"ikea",
"wardrobe",
"mulig"
] | Hobby & Makers > Organizers | [
"991049/images/image_1_compressed.jpg",
"991049/images/image_2_compressed.jpg"
] | [
"991049/stls/IKEA MULIG STOPPER_V2.stl"
] | CC-BY | https://www.printables.com/model/991049 | data_0048.tar |
42156 | Storage Box 2 Drawer stackable | <p>Storage Box 2 Drawer stackable. These boxes will stack as the bottom of the box will nestle in the top when stacked</p>
<h3>Print instructions</h3><p>I printed this using a 0.6 nozzle . I have turned on 'Detect Thin Walls' in Print Settings > Layers and Perimeters > Quality (slower slicing). I also use the... | [
"box",
"organizer",
"mini",
"storagebox",
"drawer"
] | Hobby & Makers > Organizers | [
"42156/images/image_1_compressed.jpg",
"42156/images/image_2_compressed.jpg",
"42156/images/image_3_compressed.jpg"
] | [
"42156/stls/box-mini-v2.stl",
"42156/stls/drawer-mini-2-full-v1.stl",
"42156/stls/drawer.stl"
] | CC-BY | https://www.printables.com/model/42156 | data_0048.tar |
876219 | Storage box clamp (Regalux) | <p>I had bought this plastic box to use as a dry box for my filament. When I picked it up in the store, there were some clamps from the same brand right next to it, so I bought a set of them too. Unfortunately they didn't fit very well and had no chance of keeping the box air tight.</p><p>So I made my own, beefier and ... | [] | Household > Other House Equipment | [
"876219/images/image_1_compressed.jpg",
"876219/images/image_2_compressed.jpg"
] | [
"876219/stls/storage box clamp.stl"
] | CC-BY | https://www.printables.com/model/876219 | data_0048.tar |
1117170 | Storage Box for Settlers of Catan, Globe Edition | <p>This is a storage box where you can put your game tokens for Settlers of Catan - Globe Edition - PolyPanel. It also functions as a base for the game.</p><p>Drawer prints ‘as is’, box prints vertically (the panel with the round hole is at the bottom). Prints with 0.4 or 0.6 nozzle.</p> | [
"storagebox",
"boardgame",
"catan"
] | Toys & Games > Board Games | [
"1117170/images/image_1_compressed.jpg",
"1117170/images/image_2_compressed.jpg"
] | [
"1117170/stls/storage box-box.stl",
"1117170/stls/storage box-drawer.stl",
"1117170/stls/storage box.stl"
] | CC-BY | https://www.printables.com/model/1117170 | data_0048.tar |
120119 | Storage boxes for Jetboil Flash/Zip (fluxring area) | <p>After couple of spice jar holders this time I share two very simple circular boxes. They fit into area of Fluxring - one inside, second under. Then you can maximally use this space</p> | [
"flash",
"hiking",
"storagebox",
"organization",
"outdoor",
"zip",
"jetboil"
] | Hobby & Makers > Organizers | [
"120119/images/image_1_compressed.jpg",
"120119/images/image_2_compressed.jpg",
"120119/images/image_3_compressed.jpg"
] | [
"120119/stls/inside_fluxring_box.stl",
"120119/stls/inside_fluxring_box_cover.stl",
"120119/stls/under_fluxring_box.stl",
"120119/stls/under_fluxring_box_cover.stl"
] | CC-BY | https://www.printables.com/model/120119 | data_0048.tar |
722287 | Storage case for HY300 projector | <p>I've printed it in PLA, 10% infill, no supports, adaptive layers and brim. Took 10:40 for tube and 4:50 for the cap on Ender S1 (probably requires some more tuning in design…)</p><p>In first run I wanted cap to also have cutouts but due to additional thread offset it was always misaligned. </p><p>Ps. You should... | [
"magcubic",
"hy300"
] | Gadgets > Photo & Video | [
"722287/images/image_1_compressed.jpg",
"722287/images/image_2_compressed.jpg",
"722287/images/image_3_compressed.jpg",
"722287/images/image_4_compressed.jpg"
] | [
"722287/stls/cap.stl",
"722287/stls/tube.stl"
] | CC-BY | https://www.printables.com/model/722287 | data_0048.tar |
1237878 | stormtrooper bead | <p>Stormtrooper bead for hoodie, trainers...</p><p>printed with hole in three different sizes: 4mm, 6mm and 8mm</p><p>chose from any three models </p><p>i used PLA marble</p><p>check out my other Star Wars bead collection</p><p> <a href="https://www.printables.com/model/1238046-darth-vader-bead">h... | [
"starwars",
"beads",
"stormtrooper",
"bead",
"hoodie"
] | Art & Design > Other Art & Designs | [
"1237878/images/image_1_compressed.jpg",
"1237878/images/image_2_compressed.jpg",
"1237878/images/image_3_compressed.jpg",
"1237878/images/image_4_compressed.jpg",
"1237878/images/image_5_compressed.jpg",
"1237878/images/image_6_compressed.jpg"
] | [
"1237878/stls/stormtrooper 4mm hole.stl",
"1237878/stls/stormtrooper 6mm hole.stl",
"1237878/stls/stormtrooper 8mm hole.stl"
] | CC0 | https://www.printables.com/model/1237878 | data_0048.tar |
961118 | StormTrooper Star Wars - HueForge 150x150 | <p><strong>Instructions:</strong><br>Print at 100% infill with a layer height of 0.08mm with a base layer of 0.1mm</p><p><strong>Swap Instructions:</strong><br>Start with Black<br>At layer #8 (0.66mm) swap to Jade White</p> | [
"starwars",
"art",
"stormtrooper",
"jedi",
"movie",
"tv",
"2d",
"hue",
"series",
"2dart",
"hueforge",
"huforge",
"hueforge2d",
"hueforge150"
] | Household > Home Decor | [
"961118/images/image_1_compressed.jpg",
"961118/images/image_2_compressed.jpg",
"961118/images/image_3_compressed.jpg"
] | [
"961118/stls/GuerreroImperial.stl",
"961118/stls/OtroTroppers_Front_150x150_D1_CP.stl"
] | GPL3.0 | https://www.printables.com/model/961118 | data_0048.tar |
889208 | straw organizer | [
"organizer",
"straw"
] | Hobby & Makers > Organizers | [
"889208/images/image_1_compressed.jpg"
] | [
"889208/stls/straw storage.stl"
] | CC0 | https://www.printables.com/model/889208 | data_0048.tar | |
35368 | Strawberry Runner Pin | <p>A simple pin or peg for holding strawberry runners in place whilst they root.</p>
| [
"strawberry"
] | Household > Outdoor & Garden | [
"35368/images/image_1_compressed.jpg",
"35368/images/image_2_compressed.jpg",
"35368/images/image_3_compressed.jpg"
] | [
"35368/stls/strawberrypin.stl"
] | CC0 | https://www.printables.com/model/35368 | data_0048.tar |
675726 | stray kids | [] | Art & Design > 2D Plates & Logos | [
"675726/images/image_1_compressed.jpg"
] | [
"675726/stls/STRAYKIDS.stl"
] | CC0 | https://www.printables.com/model/675726 | data_0048.tar | |
358532 | Stream Deck XL 1/4" Mount | <p>There are two versions available, one that has the ¼"-20 Thread modeled in and one that fits a hot melt brass insert. I am using ones that are 9mm long.</p><p>The stream deck is hold in place using invisible magnets, it fits 12 6x3mm magnets like these</p><p><a href="https://www.magnet-shop.net/neodym/scheibenmagnet... | [
"xl",
"deck",
"stream",
"elgato"
] | Gadgets > Other Gadgets | [
"358532/images/image_1_compressed.jpg",
"358532/images/image_2_compressed.jpg",
"358532/images/image_3_compressed.jpg"
] | [
"358532/stls/Streamdeck Mount XL Thread.stl",
"358532/stls/Streamdeck Mount XL.stl"
] | CC-BY | https://www.printables.com/model/358532 | data_0048.tar |
453347 | StreamDeck Stand - Hexagonless | <p>Simply removed the hexagons from the original file in order to facilitate a cleaner and more minimalistic design aesthetic.</p><p>Demo is printed in obnoxious Candy Pink, but you can print in black. Does not require supports, but do print slow and make sure you have proper bed adhesion--corners are prone to peeling ... | [
"streamdeck"
] | Gadgets > Other Gadgets | [
"453347/images/image_1_compressed.jpg"
] | [
"453347/stls/StreamDeck Stand.stl"
] | GPL2.0 | https://www.printables.com/model/453347 | data_0048.tar |
1150624 | Street Dice | <p>I’m new to 3D printing and thrilled to share my very first original creation! While it’s a simple design, I’d love to hear your feedback and see how your own projects turn out.</p><p>For this print, I used standard 1.75mm PLA filament, a 0.4mm nozzle, and set the printer to 220°C for the nozzle and 60°C for the bed.... | [
"toy",
"game",
"games",
"toys",
"dice",
"pla",
"simple",
"beginner",
"beginnerfriendly"
] | Toys & Games > Other Toys & Games | [
"1150624/images/image_1_compressed.jpg",
"1150624/images/image_2_compressed.jpg",
"1150624/images/image_3_compressed.jpg"
] | [
"1150624/stls/Copy of Dice .stl",
"1150624/stls/Dice .stl"
] | CC0 | https://www.printables.com/model/1150624 | data_0048.tar |
338568 | string test print (retraction) | <p>use a .2 mm layer height</p><p>I also recommend scaling it up about 10 to 20%</p><p> </p> | [
"test",
"testprint",
"printercalibration",
"strings"
] | 3D Printers > Test Models | [
"338568/images/image_1_compressed.jpg"
] | [
"338568/stls/test.stringing.stl"
] | CC-BY | https://www.printables.com/model/338568 | data_0048.tar |
452115 | Stroller hook with gyroscopic cupholder | <p>I designed this hook to hang bags on our Mountain Buggy Duet stroller. This is a version with gyroscopic cupholder. To assemble it you need 4 M2.5 screws with nuts and to secure them I use Loctite glue. Hook_with_holder should be printed upside down with supports. </p><p>You don't need any tools to mount it to ... | [
"cup",
"holder",
"hook",
"gyroscope",
"cupholder",
"gyroscopic",
"stroller",
"moutainbuggy",
"mountainbuddyduet"
] | Household > Other House Equipment | [
"452115/images/image_1_compressed.jpg",
"452115/images/image_2_compressed.jpg"
] | [
"452115/stls/Hook_with_holder.stl",
"452115/stls/Second_ring.stl",
"452115/stls/Third_ring.stl"
] | CC-BY | https://www.printables.com/model/452115 | data_0048.tar |
26086 | Strong Easy to print Bracket | <p>This is a strong and easy to print bracket. Useful to build furniture and basically fix anything you want to the wall. It is available in to sizes, small and large.</p>
<h3>Print instructions</h3><p>Print on its side, without supports</p> | [
"shelf",
"supportless",
"bracket",
"mountingbracket",
"shelfbracket",
"brackets",
"bookshelf",
"anglebracket"
] | Household > Other House Equipment | [
"26086/images/image_1_compressed.jpg",
"26086/images/image_2_compressed.jpg"
] | [
"26086/stls/bracket_by_joan_v2.stl",
"26086/stls/bracket_by_joan_v2_large.stl"
] | CC0 | https://www.printables.com/model/26086 | data_0048.tar |
977267 | Strong Geometric Vase mode bin/trash can (bottom fixed) | <p>A simple, 210x210x240mm (ender 3 compatible!), geometric, vase mode, printable bin with an accent ring for style points (and extra strength)! Printed with an .8mm nozzle but also printable with .4m (slightly weaker). accent ring printed in normal layer by layer mode with 3 walls, 15% infill, also printable with .8mm... | [
"vase",
"vasemode",
"trashcan",
"bin",
"strong"
] | Household > Bedroom | [
"977267/images/image_1_compressed.jpg",
"977267/images/image_2_compressed.jpg"
] | [
"977267/stls/accent-strength ring.stl",
"977267/stls/Trash Can Vase Mode 2.0.stl"
] | CC-BY | https://www.printables.com/model/977267 | data_0048.tar |
1338983 | Strong Geometric Vase Mode bin/trash can - bottom fixed | <p>Recommended slicing settings with vase mode turned on:<br> </p><figure class="image"><img src="https://media.printables.com/media/prints/1338983/rich_content/faa8386d-ff91-4d10-b889-19e4aa41ffb8/image.png#%7B%22uuid%22%3A%2240367e6f-46c1-4989-ba97-9831f6fe0764%22%2C%22w%22%3A486%2C%22h%22%3A146%7D"></figure><fi... | [
"vase",
"vasemode",
"wastebin",
"trashcan",
"garbage",
"bin",
"trash"
] | Household > Office | [
"1338983/images/image_1_compressed.jpg"
] | [
"1338983/stls/accent, strength ring.stl",
"1338983/stls/TrashCanVaseMode.stl",
"1338983/stls/trashCanVaseMode.stl"
] | CC-BY | https://www.printables.com/model/1338983 | data_0048.tar |
431954 | Strong Hinge | -2.4 mm sheet (Acrylic door)
-M3 Screws
-Heavy Duty (High infill density)
-0 to 90 degrees
-1 cm thick
-customizable | Download free 3D printable STL models | [
"hinge",
"hinges"
] | Hobby & Makers > Mechanical Parts | [
"431954/images/image_1_compressed.jpg",
"431954/images/image_2_compressed.jpg",
"431954/images/image_3_compressed.jpg",
"431954/images/image_4_compressed.jpg",
"431954/images/image_5_compressed.jpg",
"431954/images/image_6_compressed.jpg",
"431954/images/image_7_compressed.jpg",
"431954/images/image_8... | [
"431954/stls/hinge A.stl",
"431954/stls/hinge B.stl"
] | CC0 | https://www.printables.com/model/431954 | data_0048.tar |
946293 | Strong mini mixer for use with drill | <p>Quick and simple mixer for small batches of resin, silicone and plaster. Takes about 10-15 minutes to print.</p><p>3 lengths available - 65mm, 105mm and 125mm.</p><p>Also a pronged variant for viscous fluids.</p><p>Each connects to a drill, with a 5mm diameter hexagonal strut. Obviously can scale this up/down to sui... | [
"hexagon",
"mix",
"drill",
"silicone",
"resin",
"mixer",
"plaster"
] | Hobby & Makers > Mechanical Parts | [
"946293/images/image_1_compressed.jpg",
"946293/images/image_2_compressed.jpg"
] | [
"946293/stls/Mixer - 105mm long.stl",
"946293/stls/Mixer - 125mm long - pronged.stl",
"946293/stls/Mixer - 125mm long.stl",
"946293/stls/Mixer - 65mm long - pronged.stl",
"946293/stls/Mixer - 65mm long.stl"
] | CC0 | https://www.printables.com/model/946293 | data_0048.tar |
274908 | Strong Print-In-Place Hinge | <p>A set of strong print-in-place hinges for use in your own projects. These should be printed in PLA or PLA+ instead of PETG. PETG is too strong for the hinge to pivot after printing. These hinges were used in my <a href="https://www.printables.com/model/175522-print-in-place-folding-table">print-in-... | [
"printinplacehinge"
] | Hobby & Makers > Mechanical Parts | [
"274908/images/image_1_compressed.jpg",
"274908/images/image_2_compressed.jpg",
"274908/images/image_3_compressed.jpg"
] | [
"274908/stls/180 degree Hinge - Large.stl",
"274908/stls/180 degree Hinge - M4 - Large.stl",
"274908/stls/180 degree Hinge - M4 - Medium.stl",
"274908/stls/180 degree Hinge - M4 - Small.stl",
"274908/stls/180 degree Hinge - Medium.stl",
"274908/stls/180 degree Hinge - Small.stl",
"274908/stls/360 degree... | CC-BY | https://www.printables.com/model/274908 | data_0048.tar |
284780 | Stronger Buster Beagle Injection Molder PID Case Remix |
<p>Stronger walls and more features. Integrated wire clamp. Universal fitment. No support needed.</p>
<h3>Print Settings</h3>
<p><strong>Supports:</strong></p>
<p>No</p>
Category: Parts
| [
"thingiverse"
] | Hobby & Makers > Other Ideas | [
"284780/images/image_1_compressed.jpg",
"284780/images/image_2_compressed.jpg",
"284780/images/image_3_compressed.jpg",
"284780/images/image_4_compressed.jpg"
] | [
"284780/stls/PID_Enclosure_SSRfin_V5_body.stronger.stl",
"284780/stls/PID_Enclosure_SSRfin_V5_rear.stronger.stl"
] | CC-BY | https://www.printables.com/model/284780 | data_0048.tar |
1547066 | Stronger Core One door magnet holder | <p>I found my Core One door to deform and crack open and rattle when the chamber temperature exceeds 50° C, so I wanted to add stronger magnets to the door. I experimented with other mods first, but found that only MORE MAGNETS would really make a difference. 6x3 cylindrical magnets are quite common and I had some lyin... | [
"door",
"stronger",
"doormagnet",
"coreone",
"coreoneupgrade"
] | 3D Printers > Prusa Parts & Upgrades | [
"1547066/images/image_1_compressed.jpg",
"1547066/images/image_2_compressed.jpg",
"1547066/images/image_3_compressed.jpg",
"1547066/images/image_4_compressed.jpg"
] | [] | GPL2.0 | https://www.printables.com/model/1547066 | data_0048.tar |
485179 | Stronger Hex Ventilated SB2209 SB2240 Door with 3007 Fan | <p>Add 3007 fan and ventilation for your can board.</p><p>I found other hex-holed remixes weak at the door edges and the holes messy to print on my non-voron printer in ABS. This is remixed to retain some strength instead of going super mesh holed.</p> | [
"can",
"fan",
"bigtreetech",
"btt",
"ebb",
"stealthburner",
"3007",
"2240",
"2209",
"sb2240",
"sb2209"
] | 3D Printers > Other Printer Parts & Upgrades | [
"485179/images/image_1_compressed.jpg",
"485179/images/image_2_compressed.jpg"
] | [
"485179/stls/sb2040_fan_cover_3007_vent.stl"
] | CC0 | https://www.printables.com/model/485179 | data_0048.tar |
1275504 | Stronger Nozzle replacement tool - MK4S NO SOCK E3D NOZZLE | <p>I recommend printing with ABS/ASA/PA or another temperature-resistant filament.</p><p> </p><p>Recomendet print settings :</p><p>minimum 4 perimeters for 0.4mm nozzle</p><p>minimum 40% infill</p> | [
"upgrade",
"prusa",
"tool",
"d",
"fast",
"part",
"nozzle",
"e3d",
"e",
"mm",
"3",
"block",
"heat",
"change",
"reinforced",
"replacment",
"chang",
"accesory",
"stronger",
"rapid",
"acc",
"02",
"wast",
"04",
"08",
"06",
"05",
"03",
"accesorie",
"025"
] | 3D Printers > Prusa Parts & Upgrades | [
"1275504/images/image_1_compressed.jpg"
] | [
"1275504/stls/Stronger Nozzle replacement tool - MK4S no sock E3D.stl"
] | GPL2.0 | https://www.printables.com/model/1275504 | data_0048.tar |
1190421 | Stronger PRUSA XL Filament guide clip | <figure class="image"><img src="https://media.printables.com/media/prints/1190421/rich_content/ed50f218-4be2-4f7e-9c0c-f16bdc9a74f3/img_5166.jpg#%7B%22uuid%22%3A%2278c8175a-22a8-47db-9b1e-851ed5cfb436%22%2C%22w%22%3A3024%2C%22h%22%3A4032%7D"></figure><p>Are you tired of these clips breaking all the time? </p><figu... | [
"clip",
"prusaxl",
"prusaxlupgrade"
] | 3D Printers > Prusa Parts & Upgrades | [
"1190421/images/image_1_compressed.jpg",
"1190421/images/image_2_compressed.jpg"
] | [
"1190421/stls/cable-clip-click.stl"
] | GPL2.0 | https://www.printables.com/model/1190421 | data_0048.tar |
208624 | Stryfe Flared Magwell | <p>Re-hosting some of my more popular designs from Thingiverse.</p><p>[NOTE V2]: Redesigned the entire foregrip section to fit around the Stryfe magwell instead of forming its own foregrip, along with all the aesthetics. This was originally only intended to be a niche design for people that thought the same way I did, ... | [
"nerf",
"stryfe",
"nerfmod",
"nerfmodding",
"nerfmods",
"nerfstryfe"
] | Hobby & Makers > Other Ideas | [
"208624/images/image_1_compressed.jpg",
"208624/images/image_2_compressed.jpg",
"208624/images/image_3_compressed.jpg"
] | [
"208624/stls/STF_Flared_Magwell_V2.stl"
] | CC0 | https://www.printables.com/model/208624 | data_0048.tar |
869829 | Stubby hex bit holders | <ul><li>Shallow hole - 8mm deep</li><li>Deep hole - 20mm deep</li><li>Magnetic Bit Holder - 42mm deep</li></ul> | [
"holder",
"bit",
"hex",
"screwdriver",
"stubby"
] | Household > Garage | [
"869829/images/image_1_compressed.jpg",
"869829/images/image_2_compressed.jpg",
"869829/images/image_3_compressed.jpg",
"869829/images/image_4_compressed.jpg"
] | [
"869829/stls/deep magnetic bit holder.stl",
"869829/stls/deep.stl",
"869829/stls/shallow.stl"
] | GPL3.0 | https://www.printables.com/model/869829 | data_0048.tar |
249641 | Stubby Round Ice Scraper |
<p>This stubby round ice scraper should be about 25-50% faster to print vs comparable scrapers with the same performance. If not better performance thanks to its sharp edge and ergonomic design.</p>
<h3>Print Settings</h3>
<p><strong>Rafts:</strong></p>
<p>No</p>
<p class="detail-setting supports"><strong>Supports: ... | [
"ice",
"scraper",
"thingiverse",
"icescraper",
"windshieldscraper"
] | Hobby & Makers > Tools | [
"249641/images/image_1_compressed.jpg",
"249641/images/image_2_compressed.jpg"
] | [
"249641/stls/LTAZ6_eScraper.stl"
] | CC-BY | https://www.printables.com/model/249641 | data_0048.tar |
1287827 | Studio Ghibli Cat Bookmark | <p>Hi I used all PLA for this print and check out my link for all machines and materials that I used! </p><p> </p><p>https://linktr.ee/megatron.prints</p> | [] | Art & Design > Other Art & Designs | [
"1287827/images/image_1_compressed.jpg",
"1287827/images/image_2_compressed.jpg"
] | [
"1287827/stls/Cat BookMark FINAL.stl"
] | CC0 | https://www.printables.com/model/1287827 | data_0048.tar |
324401 | stumble guys - change color logo keychain | <p>stumble guys - change color logo keychain</p> | [
"toy",
"game",
"ender",
"pla",
"keychain",
"blender",
"prusaslicer",
"sketchup",
"stumble",
"guys",
"stumbleguys"
] | Gadgets > Other Gadgets | [
"324401/images/image_1_compressed.jpg",
"324401/images/image_2_compressed.jpg"
] | [
"324401/stls/logo-guys-zmiana-koloru.stl",
"324401/stls/logo-guys.stl"
] | GPL3.0 | https://www.printables.com/model/324401 | data_0048.tar |
324398 | Stumble Guys Santa - Cookie Cutter | <p>Stumble Guys Santa - Cookie Cutter</p> | [
"kitchen",
"cooking",
"toy",
"santa",
"claus",
"game",
"cookie",
"cutter",
"cookiecutter",
"merrychristmas",
"santaclaus",
"stumble",
"videogamemodeling",
"guys",
"stumbleguys"
] | Household > Kitchen | [
"324398/images/image_1_compressed.jpg"
] | [
"324398/stls/Stumble_Guys_Santa-Cookie_Cutter.stl"
] | GPL3.0 | https://www.printables.com/model/324398 | data_0048.tar |
1721065 | Stylish Stackable Boxes with a ribbed outer design | <p></p><p><strong>Stackable Storage Boxes with Ribbed Design</strong></p><p>Keep stacking until you can't stack anymore!</p><p>These stackable storage boxes feature an attractive ribbed outer design that provides a pleasing look and feel. Designed for fast printing with a 0.6mm nozzle, they can also be printed with a 0... | [
"box",
"organiser",
"container",
"stackable",
"stackablecontainer"
] | Household > Office | [
"1721065/images/image_1_compressed.jpg",
"1721065/images/image_2_compressed.jpg",
"1721065/images/image_3_compressed.jpg",
"1721065/images/image_4_compressed.jpg",
"1721065/images/image_5_compressed.jpg",
"1721065/images/image_6_compressed.jpg",
"1721065/images/image_7_compressed.jpg",
"1721065/images... | [
"1721065/stls/Print Files stl.stl"
] | CC0 | https://www.printables.com/model/1721065 | data_0048.tar |
401918 | Stylish Tokabo Lamp Replacement | <p>In case you broke your tokabo lamp I left you a replacement for the glass part.</p><p>It will be necessary to remove the retaing tabs as you can see on the picture and the botom part it is holding in place with hot glue.</p><p>I recomend supports to print the top surface , I printed it with the new 2.6 tree supports... | [
"ikea",
"light",
"lamp",
"repair",
"repairpart",
"nightlight",
"tokabo"
] | Household > Home Decor | [
"401918/images/image_1_compressed.jpg",
"401918/images/image_2_compressed.jpg",
"401918/images/image_3_compressed.jpg"
] | [
"401918/stls/Broken Glass Replacement.stl"
] | CC0 | https://www.printables.com/model/401918 | data_0048.tar |
1470876 | Stylus for FlashForge AD5X with USB plug | <p>A stylus designed for FlashForge AD5X that allows you to plug it into a USB port, so the stylus is always there when you need it.<br> </p><p><strong>Warning</strong></p><ul><li>like any stylus for resistive touch screens, you can easily scratch the screen if not careful</li><li>the usb plug is not tight f... | [
"stylus",
"flashforge",
"ad5x"
] | 3D Printers > Accessories | [
"1470876/images/image_1_compressed.jpg",
"1470876/images/image_2_compressed.jpg",
"1470876/images/image_3_compressed.jpg",
"1470876/images/image_4_compressed.jpg"
] | [
"1470876/stls/stylus-flashforge_ad5x_usb_plug.stl"
] | CC0 | https://www.printables.com/model/1470876 | data_0048.tar |
1328828 | Subaru CV Axle Seal Driver | <p>CV Axle Seal driver for 2017 Subaru Crosstrek. Please research if compatible with other Subaru models.</p><p>Increase infill density for desired robustness.</p><p>Commercial and other models I found only matched the diameter of seal, so you would have to be careful to set depth properly. This design acco... | [
"subaru",
"seal",
"axle",
"seals",
"subarucrosstrek",
"sealdriver"
] | Hobby & Makers > Tools | [
"1328828/images/image_1_compressed.jpg"
] | [
"1328828/stls/CV Axle Seal driver.stl"
] | CC-BY | https://www.printables.com/model/1328828 | data_0048.tar |
823868 | Subnautica Cyclops Submarine | <p>This is a 3d model of the cyclops submarine seen in Subnautica. It was designed to be assembled as a kit, however since I have very limited experience with making printed parts fit, some glue could be required (I used some for several lights and the two extrusions).</p><p>The model seen in the photos was printed on ... | [
"cyclops",
"altera",
"submarine",
"subnautica"
] | Toys & Games > Action Figures & Statues | [
"823868/images/image_1_compressed.jpg",
"823868/images/image_2_compressed.jpg",
"823868/images/image_3_compressed.jpg",
"823868/images/image_4_compressed.jpg",
"823868/images/image_5_compressed.jpg",
"823868/images/image_6_compressed.jpg"
] | [
"823868/stls/Antennas.stl",
"823868/stls/Cockpit.stl",
"823868/stls/Connectors.stl",
"823868/stls/Docking_Bay_Back.stl",
"823868/stls/Docking_Bay_Doors.stl",
"823868/stls/Docking_Bay_Front.stl",
"823868/stls/Fins_Bottom.stl",
"823868/stls/Fins_Top.stl",
"823868/stls/Hatch.stl",
"823868/stls/Lights... | CC-BY | https://www.printables.com/model/823868 | data_0048.tar |
661793 | subnautica data tablets | [
"subnautica"
] | Costumes & Accessories > Props | [
"661793/images/image_1_compressed.jpg"
] | [
"661793/stls/blue_tablet.stl",
"661793/stls/orange_tablet.stl",
"661793/stls/purple_tablet.stl"
] | CC0 | https://www.printables.com/model/661793 | data_0048.tar | |
49385 | Succulent Plant Pot / Planter "Daisy" | <p>***<br><strong>New collection of 8 plant pots</strong> - <a href="https://www.printables.com/model/127174-plant-pot-collection">https://www.prusaprinters.org/prints/127174-plant-pot-collection</a><br>***</p><p>The "Daisy" plant pot / planter is 7cm in diameter and 6cm in height.</p><p>The design is a solid shape, gi... | [
"planter",
"succulents",
"succulentpot",
"succulentplanter"
] | Household > Home Decor | [
"49385/images/image_1_compressed.jpg",
"49385/images/image_2_compressed.jpg",
"49385/images/image_3_compressed.jpg"
] | [
"49385/stls/daisy.stl"
] | CC-BY | https://www.printables.com/model/49385 | data_0048.tar |
142796 | Succulent Planter |
<p>My daughter's first request when I got my printer. Its a basic pot but She designed it and I think its quite fashionable.</p>
Category: Outdoor & Garden
| [
"succulent",
"thingiverse",
"planters",
"succulents",
"succulentpot"
] | Household > Outdoor & Garden | [
"142796/images/image_1_compressed.jpg",
"142796/images/image_2_compressed.jpg"
] | [
"142796/stls/Planter.stl"
] | CC-BY | https://www.printables.com/model/142796 | data_0048.tar |
157629 | Succulent planter with drainage tray |
<p>A small planter for succulents. The large drainage holes in the pot, combined with the drainage tray ensure the succulent's roots don't sit in water and rot.</p>
<p>The tray has vertical supports to raise the pot off the floor, allowing some space for gravel.</p>
Category: Outdoor & Garden
| [
"thingiverse"
] | Household > Outdoor & Garden | [
"157629/images/image_1_compressed.jpg",
"157629/images/image_2_compressed.jpg",
"157629/images/image_3_compressed.jpg",
"157629/images/image_4_compressed.jpg",
"157629/images/image_5_compressed.jpg",
"157629/images/image_6_compressed.jpg"
] | [
"157629/stls/pot_v1.stl",
"157629/stls/tray_v1.stl"
] | CC-BY | https://www.printables.com/model/157629 | data_0048.tar |
115396 | Succulent Tower Planter Pot | <p>Description from original author:</p><p> </p><p>Castle tower for your succulent? Yes, another succulent planter for your desk or home. This one has the over water drain in the lower level. If you see water there, you have watered too much. The bottom vents allow the soil to breathe.</p> | [
"pot",
"succulent",
"garden",
"plantpot",
"flowerpot",
"indoorgardening",
"planterpot",
"planterspot",
"indoorgarden",
"succulents",
"indoorplantpot",
"succulentpot",
"cactuspot",
"succulentplanter"
] | Household > Outdoor & Garden | [
"115396/images/image_1_compressed.jpg",
"115396/images/image_2_compressed.jpg",
"115396/images/image_3_compressed.jpg",
"115396/images/image_4_compressed.jpg",
"115396/images/image_5_compressed.jpg"
] | [
"115396/stls/Penta_Garden_Pot.stl"
] | CC-BY | https://www.printables.com/model/115396 | data_0048.tar |
580733 | Sugar Spoon Replacement | <p>Did your delicate porcelain sugar spoon snap in half because of your disgustingly strong hands? Worry not for now you can print a replacement which is much more durable!</p> | [
"kitchen",
"sugar",
"spoon",
"sugarspoon"
] | Household > Kitchen | [
"580733/images/image_1_compressed.jpg",
"580733/images/image_2_compressed.jpg",
"580733/images/image_3_compressed.jpg",
"580733/images/image_4_compressed.jpg",
"580733/images/image_5_compressed.jpg"
] | [
"580733/stls/sugar-spoon.stl"
] | CC0 | https://www.printables.com/model/580733 | data_0048.tar |
1306321 | Sugármérő | <h3><strong>Sugármérő</strong></h3> | [
"template",
"radius"
] | Household > Garage | [
"1306321/images/image_1_compressed.jpg",
"1306321/images/image_2_compressed.jpg"
] | [
"1306321/stls/Untitled-590f80d0.stl"
] | CC-BY | https://www.printables.com/model/1306321 | data_0048.tar |
137295 | Suitcase/Box/Case Handle |
<p>I used this original design to design my handle:
<a href="https://www.thingiverse.com/thing:299982">https://www.thingiverse.com/thing:299982</a></p>
<p>I changed the handle to use two 5mm x 25mm cap screws and I redesigned the base to be stronger and to receive a 5mm Nyloc nut. I needed the extra strength for us... | [
"box",
"case",
"handle",
"thingiverse",
"suitcase",
"briefcase",
"woodenbox",
"suitcasehandle",
"boxhandle",
"lunchboxhandle",
"woodenboxhandle"
] | Household > Other House Equipment | [
"137295/images/image_1_compressed.jpg",
"137295/images/image_2_compressed.jpg",
"137295/images/image_3_compressed.jpg",
"137295/images/image_4_compressed.jpg",
"137295/images/image_5_compressed.jpg",
"137295/images/image_6_compressed.jpg",
"137295/images/image_7_compressed.jpg",
"137295/images/image_8... | [
"137295/stls/Suitcase_Handle_Bar.stl",
"137295/stls/Suitcase_Handle_Base.stl"
] | CC-BY | https://www.printables.com/model/137295 | data_0048.tar |
367119 | Sumup card reader dock / stand | <p>just a quick dock dor the sumup card reader, am yet to print but help yourself.</p>
<p>available as a clean no charge version or a version with a slot for the cable.</p>
<h3>How I Designed This</h3>
<p><strong>fusion 360</strong></p>
Category: Other | [
"card",
"dock",
"thingiverse",
"sumup",
"sumupdock"
] | Hobby & Makers > Other Ideas | [
"367119/images/image_1_compressed.jpg",
"367119/images/image_2_compressed.jpg",
"367119/images/image_3_compressed.jpg",
"367119/images/image_4_compressed.jpg"
] | [
"367119/stls/sumup_stand.stl",
"367119/stls/sumup_stand_with_cable.stl"
] | CC-BY | https://www.printables.com/model/367119 | data_0048.tar |
393124 | SUN | SUN | Download free 3D printable STL models | [
"art",
"sun"
] | Art & Design > Wall-mounted | [
"393124/images/image_1_compressed.jpg"
] | [
"393124/stls/SUN.stl"
] | CC-BY | https://www.printables.com/model/393124 | data_0048.tar |
284227 | Sun Coaster | <p>PETG and 0.2 layer height.</p> | [
"coaster",
"sun",
"drinkcoaster",
"summertime"
] | Seasonal designs > Summer | [
"284227/images/image_1_compressed.jpg",
"284227/images/image_2_compressed.jpg"
] | [
"284227/stls/Sun Coaster.stl"
] | CC-BY | https://www.printables.com/model/284227 | data_0048.tar |
100387 | Sunglass Clip Car |
<p>I´ve seen a lot of these Clips but no one holds my sunglasses properly so I decided to design one by my own. Feel free to share your prints.</p>
<p>Follow me on Instagram for more cool prints.<br/>
<a href="https://instagram.com/lukas_prints3d?igshid=13tcwrb498bas">https://instagram.com/lukas\_prints3d?igshid=13tcw... | [
"car",
"seat",
"sunglasses",
"thingiverse",
"sunglassesholder",
"sunglassesclip"
] | Hobby & Makers > Automotive | [
"100387/images/image_1_compressed.jpg",
"100387/images/image_2_compressed.jpg"
] | [
"100387/stls/Sunglass-Clip.stl"
] | CC-BY | https://www.printables.com/model/100387 | data_0048.tar |
845390 | Sunglasses Holder for Tesla Model 3 Headliner | <p>Recommend printing 100% infill in TPU95A</p> | [
"sunglasses",
"tesla",
"model3"
] | Hobby & Makers > Automotive | [
"845390/images/image_1_compressed.jpg",
"845390/images/image_2_compressed.jpg"
] | [
"845390/stls/tesla model 3 sunglasses headliner hook v3.stl",
"845390/stls/tesla model 3 sunglasses headliner hook v4 for tpu.stl"
] | BSD | https://www.printables.com/model/845390 | data_0048.tar |
163409 | SUNLU FilaDryer S1 bracket |
<p>Bracket for SUNLU FilaDryer S1</p>
<p>Use 4 x M4x12 mm Allen screws and 4 t-nuts M4 to mount on your Ender Printer (20x20mm profiles)</p>
<p>Print with support 'Buidplate only'.</p>
<p>Suitable for assembly left or right, front or back of printer</p>
Category: 3D Printer Accessories
| [
"bracket",
"dryer",
"thingiverse",
"filamentdryer",
"mountingbracket",
"sunlu",
"sunlufiladryers1",
"adaptateursunlu"
] | 3D Printers > Accessories | [
"163409/images/image_1_compressed.jpg",
"163409/images/image_2_compressed.jpg",
"163409/images/image_3_compressed.jpg",
"163409/images/image_4_compressed.jpg",
"163409/images/image_5_compressed.jpg",
"163409/images/image_6_compressed.jpg",
"163409/images/image_7_compressed.jpg",
"163409/images/image_8... | [
"163409/stls/Dryer_Bracket_v6.stl"
] | CC-BY | https://www.printables.com/model/163409 | data_0048.tar |
559704 | Sunlu Filadryer S1 Plug | <p>a small plug to replace the ptfe if you dont run filament through it. to withstand the temperatures inside of the drybox i would reccomend printing with petg or abs</p> | [
"drybox",
"moisture",
"sunlu",
"sunlufiladryers1",
"moistureprotection"
] | 3D Printers > Other Printer Parts & Upgrades | [
"559704/images/image_1_compressed.jpg",
"559704/images/image_2_compressed.jpg"
] | [
"559704/stls/Sunlu Plug S1.stl"
] | CC-BY | https://www.printables.com/model/559704 | data_0048.tar |
86158 | Sunlu Filament Dryer Bracket | <p>Just mirror the print for the other side</p> | [
"prusa",
"filament",
"bracket",
"dryer",
"sunlu"
] | 3D Printers > Accessories | [
"86158/images/image_1_compressed.jpg"
] | [
"86158/stls/prusa_sunlu_holder.stl"
] | CC0 | https://www.printables.com/model/86158 | data_0048.tar |
58044 | Sunlu Filament Dryer PTFE Screw-in Mount | <p>A couple things about my model. By adding threads to the already thin mount, it can be broken if you try to tighten the nut down too tight. All you have to do is sinch it up and not over tighten.</p><p>I added a small brim to the bottom of the threads because it kept popping off the plate. It is ea... | [
"ptfe",
"dryer",
"filamentdrybox",
"sunlu"
] | 3D Printers > Other Printer Parts & Upgrades | [
"58044/images/image_1_compressed.jpg",
"58044/images/image_2_compressed.jpg",
"58044/images/image_3_compressed.jpg"
] | [
"58044/stls/Sunlu Nut Flat.stl",
"58044/stls/Sunlu Nut Rounded.stl",
"58044/stls/Sunlu PTFE Mount.stl"
] | CC0 | https://www.printables.com/model/58044 | data_0048.tar |
277850 | Sunlu PTFE coupler | <p>Sunlu S1 filadryer filament guide that can be printed on the side for increased strength from layer orientation and can be fitted with an M10 PTFE coupling.</p> | [
"sunlu",
"sunlufiladryers1",
"filadryers1"
] | 3D Printers > Accessories | [
"277850/images/image_1_compressed.jpg"
] | [
"277850/stls/Sunlu PTFE Coupler.stl"
] | GPL2.0 | https://www.printables.com/model/277850 | data_0048.tar |
1387629 | Sunlu Refill Adapter | <p>An adapter for the old Sunlu spools so that you can use refills. I have used the Elegoo refill with it.</p><p>My understanding is that the Sunlu spools have different generations. The newest ones don't need adapters, but the previous ones that have numbers on the sides possibly all vary slightly. The spool numbers t... | [
"fillament",
"spooladapter",
"elegoo",
"sunlu"
] | 3D Printers > Accessories | [
"1387629/images/image_1_compressed.jpg",
"1387629/images/image_2_compressed.jpg",
"1387629/images/image_3_compressed.jpg",
"1387629/images/image_4_compressed.jpg"
] | [
"1387629/stls/Sunlu Adapter 60.stl"
] | CC0 | https://www.printables.com/model/1387629 | data_0048.tar |
1051137 | Sunlu S2 base with ventilation and fastening points. / Sunlu S2 Unterteil mit Lüftung und Befestigungspunkten. | <p>I developed a new base for den Sunlu S2 filament dryer. The reasons were that I wanted to fix the device (in my case to a windowsill) and that I wanted to have ventilation at the bottom of the fan so that the moist air can get out of the dryer.</p><p>My base is flat and I have provided eight 5.6 mm holes for M4 melt... | [
"base",
"filamentdryer",
"sunlu"
] | 3D Printers > Accessories | [
"1051137/images/image_1_compressed.jpg",
"1051137/images/image_2_compressed.jpg",
"1051137/images/image_3_compressed.jpg",
"1051137/images/image_4_compressed.jpg",
"1051137/images/image_5_compressed.jpg",
"1051137/images/image_6_compressed.jpg",
"1051137/images/image_7_compressed.jpg",
"1051137/images... | [
"1051137/stls/Sunlu_S2_Base.stl",
"1051137/stls/Sunlu_S2_Slider_knob.stl",
"1051137/stls/Sunlu_S2_Slider_left.stl",
"1051137/stls/Sunlu_S2_Slider_right.stl"
] | CC-BY | https://www.printables.com/model/1051137 | data_0048.tar |
257667 | Sunlu S2 filadryer wall mount | <p>A wall mount for the Sunlu S2. Needs a couple of 4mm or so screws to attach to the wall, and a pair of 40mm m8 nuts and bolts (though you can get away with a longer single m8 bolt if you want). Also needs 4 M3 brass inserts to hold the spool-holder tray in place. If you want to adapt it to another spool dryer or sim... | [
"wall",
"mount",
"s2",
"filadryer",
"sunlu"
] | 3D Printers > Accessories | [
"257667/images/image_1_compressed.jpg"
] | [
"257667/stls/Mount Part 1.stl",
"257667/stls/Mount Part 2.stl",
"257667/stls/Nuts holder.stl",
"257667/stls/Tray.stl"
] | CC-BY | https://www.printables.com/model/257667 | data_0048.tar |
1009647 | Sunlu S4 Knob Extensions | <figure class="image"><img src="https://media.printables.com/media/prints/1009647/rich_content/4e48cb85-c86a-4449-a61b-acd351b56937/image.png#%7B%22uuid%22%3A%22e4367a4b-d65c-422b-9019-972572fe7162%22%2C%22w%22%3A701%2C%22h%22%3A666%7D"></figure> | [
"sunlu"
] | 3D Printers > Accessories | [
"1009647/images/image_1_compressed.jpg"
] | [
"1009647/stls/Sunlu s4 knob.stl"
] | CC0 | https://www.printables.com/model/1009647 | data_0048.tar |
1553113 | SUNLU spool drawer | <p>Made for a variant of the SUNLU spools we get in Australia, I got mine from Jaycar.</p><p>There is a notch in the drawer to avoid the V on the barrel, and a pin that will insert into the slot on the bottom of the hinge barrel to locate top and bottom.</p><p>Suggested to print solid for strength.</p> | [
"storage",
"sunlu",
"spoolstorage"
] | Hobby & Makers > Organizers | [
"1553113/images/image_1_compressed.jpg"
] | [
"1553113/stls/SUNLU spool drawer v1.stl"
] | CC-BY | https://www.printables.com/model/1553113 | data_0048.tar |
877447 | Sunrise At Sea Landscape Wall art | <p>Sunrise At Sea Landscape Wall art</p> | [] | Art & Design > Wall-mounted | [
"877447/images/image_1_compressed.jpg"
] | [
"877447/stls/Sunrise At Sea Landscape Wall art.stl"
] | CC-BY | https://www.printables.com/model/877447 | data_0048.tar |
1252768 | SUP pump adapters | <p>Adapter types available (from left to right)</p><ul><li><p>Large, medium, and small adapters for blow-up pool toys and such</p></li><li><p>Adapters for thread-on one-way valve port (mine is on a Bestway SaluSpa hot tub)</p></li></ul><p>Your SUP hand pump is a high quality, very capable tool. It produces high v... | [] | Sports & Outdoor > Outdoor Sports | [
"1252768/images/image_1_compressed.jpg",
"1252768/images/image_2_compressed.jpg",
"1252768/images/image_3_compressed.jpg",
"1252768/images/image_4_compressed.jpg",
"1252768/images/image_5_compressed.jpg"
] | [
"1252768/stls/Adapter ext 23mm thread V0.2.stl",
"1252768/stls/Adapter int 21mm thread V0.2.stl",
"1252768/stls/Adapter nozzle large V2.2.stl",
"1252768/stls/Adapter nozzle medium V2.2.stl",
"1252768/stls/Adapter nozzle small V2.4.stl",
"1252768/stls/spacer 0.3mm V0.1.stl",
"1252768/stls/spacer 0.6mm V0... | CC-BY | https://www.printables.com/model/1252768 | data_0048.tar |
1563031 | Super Bouncy Gravitrax Trampoline - Snug fit - PETG Recommended - Fast | <div data-youtube-video=""><iframe class="editor-youtube" width="640" height="480" allowfullscreen="true" autoplay="false" disablekbcontrols="false" enableiframeapi="false" endtime="0" ivloadpolicy="0" loop="false" modestbranding="false" origin="" playlist="" rel="1" src="https://www.youtube-nocookie.com/embed/icnXszvp... | [
"toys",
"petg",
"accessories",
"trampoline",
"marble",
"marblerun",
"marbles",
"gravitrax",
"bounce"
] | Toys & Games > Other Toys & Games | [
"1563031/images/image_1_compressed.jpg",
"1563031/images/image_2_compressed.jpg",
"1563031/images/image_3_compressed.jpg",
"1563031/images/image_4_compressed.jpg",
"1563031/images/image_5_compressed.jpg",
"1563031/images/image_6_compressed.jpg",
"1563031/images/image_7_compressed.jpg",
"1563031/images... | [
"1563031/stls/MC3D-Gravitrax--Trampoline.stl"
] | CC-BY | https://www.printables.com/model/1563031 | data_0048.tar |
78054 | Super Duper Paste Pusher | <p>A simpler version.</p>
<h3> Print Settings</h3>
<p><strong>Printer:</strong></p>
<p>ZAV H-Bot</p>
<p><p class="detail-setting rafts"><strong>Rafts: </strong> <div><p>No</p></div><strong>Supports:</strong></p>
<p>No</p>
<p><p class="detail-setting resolution"><strong>Resolution: </strong> <div><p>0.2</p></div><strong... | [
"toothpaste",
"thingiverse",
"pusher"
] | Household > Bathroom | [
"78054/images/image_1_compressed.jpg"
] | [
"78054/stls/Paste_Pusher.stl"
] | LGPL | https://www.printables.com/model/78054 | data_0048.tar |
732223 | Super Lube Needle Nose Applicator | <p>This is an needle applicator tip for the Super Lube 3oz bottle (with M14 threads) as well as a new cap. I'm using the 92003 Super Lube, but any bottle with M14 threads should work.</p><p>I needed an easy way to get a small amount of grease in some tight spaces. By default, it will take a good amount of squeezi... | [
"applicator",
"superlube"
] | Hobby & Makers > Tools | [
"732223/images/image_1_compressed.jpg",
"732223/images/image_2_compressed.jpg"
] | [
"732223/stls/Needle Applicator Cap.stl",
"732223/stls/Needle Applicator.stl"
] | CC-BY | https://www.printables.com/model/732223 | data_0048.tar |
407016 | Super Mario - Multicolor - MMU2 | Super Mario Schild/Logo
if you like my model please leave a like there | Download free 3D printable STL models | [
"mario",
"nintendo",
"super",
"supermario",
"luigi"
] | Art & Design > 2D Plates & Logos | [
"407016/images/image_1_compressed.jpg"
] | [
"407016/stls/SuperMario_MMU2.stl"
] | GPL3.0 | https://www.printables.com/model/407016 | data_0048.tar |
570179 | Super Mario Bros. Wonder Coin | <p>wip single sided Mario Bros. Wonder coin. It would look great printed in resin.</p> | [
"mario",
"nintendo",
"wonder",
"supermario"
] | Gadgets > Video Games | [
"570179/images/image_1_compressed.jpg"
] | [
"570179/stls/Mario Wonder Coin.stl"
] | CC-BY | https://www.printables.com/model/570179 | data_0048.tar |
455677 | Super Mario Question Block | <p>Modeled this up after seeing the Mario movie, my own take on the question block. Should be about 5 inches tall.</p>
Category: Props | [
"supermario",
"questionblock",
"thingiverse"
] | Costumes & Accessories > Props | [
"455677/images/image_1_compressed.jpg",
"455677/images/image_2_compressed.jpg"
] | [
"455677/stls/Question_Box.stl"
] | CC-BY | https://www.printables.com/model/455677 | data_0048.tar |
13445 | Super Meat Boy! | <p>Watch here: <a href="https://youtu.be/fAOYni0qDKU">https://youtu.be/fAOYni0qDKU</a></p>
<p>It's Super Meat Boy! I love this game and I love the character as well. My wife was the one who created this model in ZBrush Core. She started with cylinders for the body and limbs and just started sculpting to get the shape, ... | [
"character",
"game",
"cute",
"fun",
"thingiverse"
] | Toys & Games > Action Figures & Statues | [
"13445/images/image_1_compressed.jpg",
"13445/images/image_2_compressed.jpg",
"13445/images/image_3_compressed.jpg",
"13445/images/image_4_compressed.jpg",
"13445/images/image_5_compressed.jpg",
"13445/images/image_6_compressed.jpg",
"13445/images/image_7_compressed.jpg"
] | [
"13445/stls/supermeatboy.stl"
] | CC-BY | https://www.printables.com/model/13445 | data_0048.tar |
174708 | Super Simple Ender3 V2 BL (or 3D) Touch Mount | <p>I needed a bracket to mount my 3D-Touch on my new Ender3 V2, and after looking around, decided to make my own.</p><p> </p><p>This one is super simple, the holes line up, there is enough clearance, and it seems stable enough.</p><p> </p><p>The M3 lock nuts should just fit the holes, and everything else shou... | [
"ender3",
"bltouch",
"3dtouch"
] | 3D Printers > Creality Parts & Upgrades | [
"174708/images/image_1_compressed.jpg",
"174708/images/image_2_compressed.jpg"
] | [
"174708/stls/Super Simple 3D Touch Ender3 V2 Mount.stl"
] | CC-BY | https://www.printables.com/model/174708 | data_0048.tar |
81128 | Super Tiny Test Piece |
<p>I made this super small test piece for testing different settings, it is small enough to print multiple units on the bed in series rather than parallel.</p>
<p>It includes steep overhangs and a bridge. It works well as a test for layer adhesion, slide your thumb between the base and the overhang, as shown in the ... | [
"bridge",
"overhang",
"thingiverse",
"stringing",
"layeradhesion"
] | 3D Printers > Test Models | [
"81128/images/image_1_compressed.jpg",
"81128/images/image_2_compressed.jpg",
"81128/images/image_3_compressed.jpg"
] | [
"81128/stls/test_piece.stl"
] | CC-BY | https://www.printables.com/model/81128 | data_0048.tar |
463576 | Super, Over The Top, Flag Holder For One Inch Flag Poles. | <p>I leave my flag out in front of my house all year. The only time it comes down is before a huge storm or tornado warnings. But living in the Midwest, storms can form quickly, and without much warning (especially in the spring.) Twice over the past few years a storm came while I was at work and brok... | [
"flag",
"flagholder"
] | Household > Outdoor & Garden | [
"463576/images/image_1_compressed.jpg",
"463576/images/image_2_compressed.jpg",
"463576/images/image_3_compressed.jpg",
"463576/images/image_4_compressed.jpg"
] | [
"463576/stls/FlagHolder1 v1.stl",
"463576/stls/FlagHolder1Mini v1.stl"
] | CC-BY | https://www.printables.com/model/463576 | data_0048.tar |
504191 | Superlube 21030 - Nozzle and cap | <p>I was looking for a way to just use a nozzle to grease carriages while still on the linear rail. Lots that allow you to grease round bearings, like the one that this was remixed from.<br><br>So the smaller one fits in the hole, in a linear rail, and the bigger one fits around a small syringe. You squeeze and bottle,... | [
"cap",
"nozzle",
"superlube"
] | Hobby & Makers > Tools | [
"504191/images/image_1_compressed.jpg",
"504191/images/image_2_compressed.jpg",
"504191/images/image_3_compressed.jpg"
] | [
"504191/stls/superlube-21030-cap.stl",
"504191/stls/superlube-21030-nozzle-smaller.stl",
"504191/stls/superlube-21030-nozzle.stl"
] | CC-BY | https://www.printables.com/model/504191 | data_0048.tar |
726369 | Supermicro X10SRi-F IO Shield | [
"server",
"supermicro",
"motherboard"
] | Gadgets > Computers | [
"726369/images/image_1_compressed.jpg"
] | [
"726369/stls/X10SRi-F IO Shield v11.stl"
] | CC0 | https://www.printables.com/model/726369 | data_0048.tar | |
1001094 | Supernote Nomad Protective Case | <p>This case is compatible for users with the Supernote Nomad and premium Heart of Metal 2 pen.</p><p>My Supernote goes in and out of my backpack daily. So I wanted to design this case to make the device and Folio case last longer.</p><p>Printed in PLA. No supports needed.</p> | [
"eink",
"supernote"
] | Gadgets > Portable Devices | [
"1001094/images/image_1_compressed.jpg",
"1001094/images/image_2_compressed.jpg",
"1001094/images/image_3_compressed.jpg"
] | [
"1001094/stls/supernote-nomad-case-v1.stl"
] | CC-BY | https://www.printables.com/model/1001094 | data_0048.tar |
915365 | Support BEACON 3D normal Rev H QIDI Xmax 3 | <figure class="media"><oembed url="https://youtu.be/ZkMoHvjxEus"></oembed></figure><p>Support du scanner BEACON 3D normal Rev H pour la QIDI Xmax 3</p> | [
"qidi",
"beacon3d",
"beaconprobe",
"xmax3"
] | 3D Printers > Other Printer Parts & Upgrades | [
"915365/images/image_1_compressed.jpg",
"915365/images/image_2_compressed.jpg",
"915365/images/image_3_compressed.jpg"
] | [
"915365/stls/beacon3d_mount v5.stl"
] | GPL2.0 | https://www.printables.com/model/915365 | data_0048.tar |
66826 | Support pour meuleuse Milwaukee M12-FDGA | <p>pour avoir ma geniale meuleuse milwaukee a portée de main</p>
<h3> Print Settings</h3>
<p><strong>Printer:</strong></p>
<p>FLSun Q5</p>
<p><p class="detail-setting rafts"><strong>Rafts: </strong> <div><p>No</p></div><strong>Supports:</strong></p>
<p>Yes</p>
<p><p class="detail-setting resolution"><strong>Resolution:... | [
"thingiverse",
"milwaukee",
"meuleuse"
] | Hobby & Makers > Tools | [
"66826/images/image_1_compressed.jpg",
"66826/images/image_2_compressed.jpg",
"66826/images/image_3_compressed.jpg",
"66826/images/image_4_compressed.jpg",
"66826/images/image_5_compressed.jpg"
] | [
"66826/stls/SUPPORT_MEULEUSE_MILWAUKEE_v1.stl"
] | CC-BY | https://www.printables.com/model/66826 | data_0048.tar |
1130232 | Support Test Models: Overhangs, Breakaway-Supports, Soluble Supports | <p>4 Test Models for optimizing and trying out different support structures and tricks.</p><p>Check out my video about different support methods and tricks:</p><figure class="media"><oembed url="https://youtu.be/-zYfn_kFQoc?si=jypnWPYKzcDSuxih"></oembed></figure> | [
"chainmail",
"support",
"chain",
"overhang",
"testprint",
"testmodel",
"soluble",
"solublesupport",
"breakaway"
] | 3D Printers > Test Models | [
"1130232/images/image_1_compressed.jpg"
] | [
"1130232/stls/Chain-V1.stl",
"1130232/stls/Support-Test-1.stl",
"1130232/stls/Support-Test-2.stl",
"1130232/stls/Support-Test-3.stl"
] | CC-BY | https://www.printables.com/model/1130232 | data_0048.tar |
655454 | Support Test/Overhang Test | [
"overhang",
"overhangtest",
"supporttest"
] | 3D Printers > Test Models | [
"655454/images/image_1_compressed.jpg",
"655454/images/image_2_compressed.jpg"
] | [
"655454/stls/overhang test.stl"
] | CC0 | https://www.printables.com/model/655454 | data_0048.tar | |
178400 | Support téléphone Josef / Josef phone support | <p><strong>FR:</strong></p><ul><li>Support de téléphone à l'effigie de Tonton Josef</li><li>Imprimer comme sur les images pour les supports</li></ul><p><strong>EN:</strong></p><ul><li>Phone holder with the effigy of Uncle Josef</li><li>Print as on the pictures for the supports</li></ul> | [
"prusa",
"josef",
"holder",
"support",
"phone",
"smartphoneholder",
"portable"
] | Gadgets > Portable Devices | [
"178400/images/image_1_compressed.jpg",
"178400/images/image_2_compressed.jpg",
"178400/images/image_3_compressed.jpg"
] | [
"178400/stls/Plaque Tonton Jojo NEWS.stl",
"178400/stls/Tonton Jojo NEWS.stl"
] | CC0 | https://www.printables.com/model/178400 | data_0048.tar |
254455 | Supportless M4 knurled bed leveling knob for ender 3 | <p>Just modified the underside of the original to print supportless. Uses an M4 nut, see the original for any other details</p> | [] | 3D Printers > Creality Parts & Upgrades | [
"254455/images/image_1_compressed.jpg"
] | [
"254455/stls/Knob.stl"
] | CC-BY | https://www.printables.com/model/254455 | data_0048.tar |
331879 | Surgical Mask Strap | Surgical Mask Strap
Please download and give it a like! :) | Download free 3D printable STL models | [] | Healthcare > Home Medical Tools | [
"331879/images/image_1_compressed.jpg"
] | [
"331879/stls/Surgical_Mask_Strap_Remix.stl"
] | CC0 | https://www.printables.com/model/331879 | data_0048.tar |
775521 | Surprisingly Stackable Set of 6 Support-Free "Potion" Bottles for Physics and Math Exploration | <p>Fun inside and outside the water! These bottles have openings big enough not to trap any fingers. The different shapes and sizes along with identical spouts make them fun to stack in different orientations and see what will balance.</p><p>Each bottle has a volume between 150 and 160mL so kiddos can learn how differe... | [
"toy",
"bottle",
"vase",
"water",
"bathtub",
"container",
"triangle",
"bath",
"star",
"circle",
"fantasy",
"float",
"supportless",
"measure",
"children",
"kid",
"balance",
"stackable",
"magic",
"chemistry",
"lab",
"flask",
"sink",
"math",
"heart",
"learning",
"lab... | Learning > Math | [
"775521/images/image_1_compressed.jpg",
"775521/images/image_10_compressed.jpg",
"775521/images/image_11_compressed.jpg",
"775521/images/image_12_compressed.jpg",
"775521/images/image_13_compressed.jpg",
"775521/images/image_14_compressed.jpg",
"775521/images/image_15_compressed.jpg",
"775521/images/i... | [
"775521/stls/heart bottle.stl",
"775521/stls/pyramidal bottle.stl",
"775521/stls/sphere bottle.stl",
"775521/stls/star bottle.stl",
"775521/stls/torus bottle.stl",
"775521/stls/twist bottle.stl"
] | CC0 | https://www.printables.com/model/775521 | data_0048.tar |
1556081 | Surron Trick Bike | <h3><u>Spring Dimensions - </u>Both the front and rear suspension uses springs which you can easily find in pens</h3><p><strong>Front Spring →</strong></p><ul><li><p><strong> <em>Diameter - </em></strong><u>5mm or less. </u></p></li><li><p><u> </u><em>Length - <u>30 mm or less</u></em></p... | [
"surron",
"67",
"surronster"
] | Hobby & Makers > Automotive | [
"1556081/images/image_1_compressed.jpg",
"1556081/images/image_2_compressed.jpg",
"1556081/images/image_3_compressed.jpg"
] | [
"1556081/stls/Frame and fork.stl",
"1556081/stls/Wheels and peices.stl"
] | CC0 | https://www.printables.com/model/1556081 | data_0048.tar |
353695 | SURTURS SKULL THOR RAGNAROK | <p>0.16MM</p><p>support on</p><p>PLA</p> | [
"skull",
"thorragnarok"
] | Art & Design > Sculptures | [
"353695/images/image_1_compressed.jpg"
] | [
"353695/stls/surturs_skull.stl"
] | CC0 | https://www.printables.com/model/353695 | data_0048.tar |
598576 | Suzuka International Racing Course | <p>This is a faithful reproduction of the Suzuka International Racing Course.</p><p>Its dimensions are 20cm long, 10cm tall, 3mm thick and the track width is 5mm, but you can scale up or down any dimension to suit your needs.</p><p>As it is a simple model, it looks great using almost any settings, but I recommend to us... | [
"car",
"racing",
"formula1",
"f1",
"2d",
"circuit",
"japan",
"formulaone",
"2dwallart",
"carracing",
"suzuka"
] | Hobby & Makers > Automotive | [
"598576/images/image_1_compressed.jpg"
] | [
"598576/stls/Suzuka_International_Racing_Course.stl"
] | CC-BY | https://www.printables.com/model/598576 | data_0048.tar |
939573 | Suzuki logo Keychain | <p>keychain for your needs. Cut Down if need be.</p><ul><li>4mm base and 0.8 color change (0.2 layers = 4 layers)</li><li>44mm x 33mm</li><li>6mm Keyring hole</li></ul> | [
"logo",
"car",
"keychain",
"truck",
"motorcycle",
"suzuki",
"dirtbike"
] | Art & Design > Other Art & Designs | [
"939573/images/image_1_compressed.jpg",
"939573/images/image_2_compressed.jpg",
"939573/images/image_3_compressed.jpg"
] | [
"939573/stls/1.stl"
] | CC0 | https://www.printables.com/model/939573 | data_0048.tar |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.