model_id stringlengths 1 7 | name stringlengths 1 169 | description stringlengths 0 38.2k | tags listlengths 0 284 | printables_category stringclasses 76
values | image_paths listlengths 0 62 | gcode_paths listlengths 1 10 | license stringclasses 8
values | source stringlengths 34 40 | shard_file stringclasses 601
values |
|---|---|---|---|---|---|---|---|---|---|
405577 | Honeycomb Wall SV06 | <p>This fits a 220x220 bed. Made it for my sovol sv06 but will work on any printer with this bed size.</p><p> </p><p>The Gcode is for a 0.6mm Nozzle, printing at 235 Nozzle Temp and 75 Bed Temp. Using Arachne this would put spots all over the bed in the first layer, they didnt stick with my layer. So i used the cl... | [
"honeycomb",
"sovol",
"220"
] | Hobby & Makers > Mechanical Parts | [
"405577/images/honeycomb.jpg"
] | [
"405577/gcode/honeycomb_wall_SV06_220_220__v0.gcode",
"405577/gcode/honeycomb_wall_SV06_220_220__v1.gcode",
"405577/gcode/honeycomb_wall_SV06_220_220__v2.gcode",
"405577/gcode/honeycomb_wall_SV06_220_220__v3.gcode",
"405577/gcode/honeycomb_wall_SV06_220_220__v4.gcode",
"405577/gcode/honeycomb_wall_SV06_22... | Creative Commons — Public Domain | https://www.printables.com/model/405577 | gcodes_0056.tar |
397367 | Makeup Organizer | <p>Printed in Bronze Silk PLA</p><p>.2 Layer height - .4 nozzle</p><p>My print time was 16 hours.</p> | [
"hexagonal",
"organizer",
"bathroomorganizer",
"beauty",
"makeup",
"lipstick",
"cosmetics",
"brushholder"
] | Household > Bathroom | [
"397367/images/eb100e27-1533-416d-adf6-a76546c122b4.jpg",
"397367/images/3b07f92d-147b-43f7-a704-1c80b5db8ace.jpg",
"397367/images/447efeee-8119-4df6-8544-f4a0c324bdee.jpg"
] | [
"397367/gcode/Makeup Oganizer__v0.gcode",
"397367/gcode/Makeup Oganizer__v1.gcode",
"397367/gcode/Makeup Oganizer__v2.gcode",
"397367/gcode/Makeup Oganizer__v3.gcode",
"397367/gcode/Makeup Oganizer__v4.gcode",
"397367/gcode/Makeup Oganizer__v5.gcode",
"397367/gcode/Makeup Oganizer__v6.gcode",
"397367/... | Creative Commons — Attribution | https://www.printables.com/model/397367 | gcodes_0056.tar |
395129 | Easy to print blank DSA keycap | <p>Very Easy to print, PLA or PETG keycap. </p><p>DSA style, flat surface</p><p> </p><p>You can print it on flat or textured sheet</p><p> </p><p><a href="https://coff.ee/giorgiofox3d">Buy me a coffee if you are happy!</a></p><p>https://coff.ee/giorgiofox3d</p> | [
"keycap",
"keycaps"
] | Gadgets > Computers | [
"395129/images/img_6315.jpg",
"395129/images/img_6311.jpg",
"395129/images/img_6313.jpg",
"395129/images/img_6314.jpg",
"395129/images/img_6312.jpg"
] | [
"395129/gcode/rinforzato__v0.gcode",
"395129/gcode/rinforzato__v1.gcode",
"395129/gcode/rinforzato__v2.gcode",
"395129/gcode/rinforzato__v3.gcode",
"395129/gcode/rinforzato__v4.gcode",
"395129/gcode/rinforzato__v5.gcode",
"395129/gcode/rinforzato__v6.gcode",
"395129/gcode/rinforzato__v7.gcode",
"395... | Creative Commons — Public Domain | https://www.printables.com/model/395129 | gcodes_0056.tar |
393395 | Baby Alpaca | <p>Print size at 100% is 8.8cm. I haven't tried scaling down, but I'm sure it's possible</p><p> </p><p>Printed on Ender 3v2 in PLA</p><p>Supports: yes</p><p>Infill: recommend at least 10%</p><p>Other settings I used: layer height 0.2, buildplate adhesion: skirt/none</p><p> </p><p>I'm new to modeling - any sug... | [
"figurine",
"cute",
"llama",
"alpaca"
] | Art & Design > Sculptures | [
"393395/images/img_5512.jpg",
"393395/images/img_5576.jpg"
] | [
"393395/gcode/Llama Figure__v0.gcode",
"393395/gcode/Llama Figure__v1.gcode",
"393395/gcode/Llama Figure__v2.gcode",
"393395/gcode/Llama Figure__v3.gcode",
"393395/gcode/Llama Figure__v4.gcode",
"393395/gcode/Llama Figure__v5.gcode",
"393395/gcode/Llama Figure__v6.gcode",
"393395/gcode/Llama Figure__v... | Creative Commons — Attribution | https://www.printables.com/model/393395 | gcodes_0056.tar |
377903 | Smoke for benchy | <p>Smoke for Benchy's funnel.</p><p>Print upside-down with supports. Use a fine detail setting.</p> | [
"boat",
"benchy"
] | 3D Printers > Test Models | [
"377903/images/smoke-4.jpg",
"377903/images/smoke-3.jpg",
"377903/images/smoke-1.jpg",
"377903/images/smoke-2.jpg"
] | [
"377903/gcode/Smoke_for_benchy__v0.gcode",
"377903/gcode/Smoke_for_benchy__v1.gcode",
"377903/gcode/Smoke_for_benchy__v2.gcode",
"377903/gcode/Smoke_for_benchy__v3.gcode",
"377903/gcode/Smoke_for_benchy__v4.gcode",
"377903/gcode/Smoke_for_benchy__v5.gcode",
"377903/gcode/Smoke_for_benchy__v6.gcode",
"... | Creative Commons — Attribution | https://www.printables.com/model/377903 | gcodes_0056.tar |
370558 | Logitech C920 Shim | <p>The tab on the bottom of my Logitech C920 webcam is longer than the bezel of my Dell S2721QS LCD. I made this spacer so that the webcam doesn't overlap the screen area.</p>
<h3>Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Monoprice</p>
<p class="detail-setting printer"><strong>Printer: </strong>
<di... | [
"camera",
"cameramount",
"webcam",
"logitech",
"webcammount",
"thingiverse"
] | Gadgets > Photo & Video | [
"370558/images/large_display_88f5fae2-606f-48d7-9b1c-c1905f0b1a75_370558.jpg",
"370558/images/large_display_a29b9f30-898a-4935-b16d-03e363ad9291_370558.jpg",
"370558/images/large_display_8ce222a8-c72a-4f03-b0f3-4ebf98ef9e91_370558.jpg"
] | [
"370558/gcode/Logitech_C920_Shim__v0.gcode",
"370558/gcode/Logitech_C920_Shim__v1.gcode",
"370558/gcode/Logitech_C920_Shim__v2.gcode",
"370558/gcode/Logitech_C920_Shim__v3.gcode",
"370558/gcode/Logitech_C920_Shim__v4.gcode",
"370558/gcode/Logitech_C920_Shim__v5.gcode",
"370558/gcode/Logitech_C920_Shim__... | Creative Commons — Attribution | https://www.printables.com/model/370558 | gcodes_0056.tar |
361470 | Puzzle Sorting Trays | <p>My wife and I enjoy building puzzles and our first step is always sorting the pieces. These trays print quickly at .3mm layer height with a .4mm nozzle. They puzzle fit together and stack for easy storage and transport of pieces.</p><p>If you Would like to send a tip:</p><p>Venmo: @Dave-Sauvageau</p><p>P... | [
"box",
"organizer",
"puzzle",
"red",
"green",
"yellow",
"blue",
"sorting",
"bucket",
"puzzlebox",
"sorter",
"tote"
] | Hobby & Makers > Organizers | [
"361470/images/puzzle-sorting-trays-2.jpg",
"361470/images/puzzle-sorting-trays-1.jpg",
"361470/images/puzzle-sorting-trays-3.jpg",
"361470/images/8b039e16-3930-4340-bdc8-1f180e49b164.jpg",
"361470/images/3dafa44d-7439-4d3d-b415-4b03d703effd.jpg",
"361470/images/9fe8fa4e-d2d4-4cad-acb2-f59649436602.jpg",
... | [
"361470/gcode/Tray__v1.gcode",
"361470/gcode/Tray__v2.gcode",
"361470/gcode/Tray__v3.gcode",
"361470/gcode/Tray__v4.gcode",
"361470/gcode/Tray__v5.gcode",
"361470/gcode/Tray__v7.gcode",
"361470/gcode/Tray__v8.gcode",
"361470/gcode/Tray__v9.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/361470 | gcodes_0056.tar |
332696 | Spaghetti portion measuring tool | [] | Household > Kitchen | [
"332696/images/spaghetti-ting.jpg"
] | [
"332696/gcode/PMG_180327__v0.gcode",
"332696/gcode/PMG_180327__v1.gcode",
"332696/gcode/PMG_180327__v2.gcode",
"332696/gcode/PMG_180327__v3.gcode",
"332696/gcode/PMG_180327__v4.gcode",
"332696/gcode/PMG_180327__v5.gcode",
"332696/gcode/PMG_180327__v6.gcode",
"332696/gcode/PMG_180327__v7.gcode",
"332... | Creative Commons — Public Domain | https://www.printables.com/model/332696 | gcodes_0056.tar | |
331612 | Christmas ball/decoration - snowflake4 | <p> </p><figure class="image image-style-align-left image_resized" style="width:45.77%;"><img src="https://media.printables.com/media/prints/331612/rich_content/c7764b64-fab4-4cce-bdbf-864ba0427a17/bmc-button.png#%7B%22uuid%22%3A%22501bc569-f2ba-4491-a18e-ad8a187b5467%22%2C%22w%22%3A1090%2C%22h%22%3A306%7D"></figu... | [
"christmas",
"xmas",
"christmasdecoration",
"merrychristmas",
"xmasdecorations",
"noel",
"vanoce"
] | Seasonal designs > Winter & Christmas & New Year's | [
"331612/images/9p.jpg"
] | [
"331612/gcode/ball-snowflake4__v0.gcode",
"331612/gcode/ball-snowflake4__v1.gcode",
"331612/gcode/ball-snowflake4__v2.gcode",
"331612/gcode/ball-snowflake4__v3.gcode",
"331612/gcode/ball-snowflake4__v4.gcode",
"331612/gcode/ball-snowflake4__v5.gcode",
"331612/gcode/ball-snowflake4__v6.gcode",
"331612/... | Creative Commons — Attribution | https://www.printables.com/model/331612 | gcodes_0056.tar |
330860 | Ifixit Mako Screwdriver Set Holder with secondary Slot REMIX - Gridfinity | <p>This is a remix of Tactical Grizzly's Ifixit Stand with an extra Slot for the Back cover so to has a dedicated place.</p><p>I thought the model was perfekt and only wanted a place to store the lid of the IFixit Mako. The extra wall I added doesn't follow the contour of the Lid and rather acts as a spring holding the... | [
"display",
"organizer",
"tool",
"screwdriver",
"ifixit",
"deskorganizer",
"gridfinity"
] | Hobby & Makers > Organizers | [
"330860/images/img_3208.jpg",
"330860/images/img_3204.jpg",
"330860/images/img_3205.jpg",
"330860/images/img_3206.jpg"
] | [
"330860/gcode/Remix - Upright Ifixit Screwdriver Set Holder with Base - Gridfinity__v0.gcode",
"330860/gcode/Remix - Upright Ifixit Screwdriver Set Holder with Base - Gridfinity__v1.gcode",
"330860/gcode/Remix - Upright Ifixit Screwdriver Set Holder with Base - Gridfinity__v2.gcode",
"330860/gcode/Remix - ... | Creative Commons — Attribution | https://www.printables.com/model/330860 | gcodes_0056.tar |
328494 | Ender 3 S1 Pro bed spacers | [
"creality",
"ender",
"crealityender3",
"siliconebed",
"spacers",
"ender3s1",
"bedspacer",
"siliconemod",
"ender3s1pro",
"s1pro",
"siliconespacer"
] | 3D Printers > Creality Parts & Upgrades | [
"328494/images/20221123_110930.jpg",
"328494/images/20221129_153515.jpg"
] | [
"328494/gcode/bed spacers__v0.gcode",
"328494/gcode/bed spacers__v1.gcode",
"328494/gcode/bed spacers__v2.gcode",
"328494/gcode/bed spacers__v3.gcode",
"328494/gcode/bed spacers__v4.gcode",
"328494/gcode/bed spacers__v5.gcode",
"328494/gcode/bed spacers__v6.gcode",
"328494/gcode/bed spacers__v7.gcode"... | Creative Commons — Attribution | https://www.printables.com/model/328494 | gcodes_0056.tar | |
323760 | Test cube | <p>Multi-angle test cube<br>You can test printing at an angle, the rise of layers at an angle</p> | [
"decoration",
"filament",
"test",
"3dprinting",
"calibration",
"cube",
"angle",
"shape",
"testprint",
"calibrationcube",
"printercalibration",
"layer",
"testprints"
] | 3D Printers > Test Models | [
"323760/images/dscn3012.jpg",
"323760/images/snimka-obrazovky-206.jpg",
"323760/images/snimka-obrazovky-204.jpg",
"323760/images/snimka-obrazovky-205.jpg",
"323760/images/dscn3013.jpg"
] | [
"323760/gcode/multiangle-cube2__v0.gcode",
"323760/gcode/multiangle-cube2__v1.gcode",
"323760/gcode/multiangle-cube2__v2.gcode",
"323760/gcode/multiangle-cube2__v3.gcode",
"323760/gcode/multiangle-cube2__v4.gcode",
"323760/gcode/multiangle-cube2__v5.gcode",
"323760/gcode/multiangle-cube2__v6.gcode",
"... | Creative Commons — Attribution | https://www.printables.com/model/323760 | gcodes_0056.tar |
318897 | Moustache | [
"moustache"
] | Costumes & Accessories > Cosplay & Costumes in general | [
"318897/images/mousestache.jpg"
] | [
"318897/gcode/1_moustache__v0.gcode",
"318897/gcode/1_moustache__v1.gcode",
"318897/gcode/1_moustache__v2.gcode",
"318897/gcode/1_moustache__v3.gcode",
"318897/gcode/1_moustache__v4.gcode",
"318897/gcode/1_moustache__v5.gcode",
"318897/gcode/1_moustache__v6.gcode",
"318897/gcode/1_moustache__v7.gcode"... | Creative Commons — Public Domain | https://www.printables.com/model/318897 | gcodes_0056.tar | |
316070 | Yarn Bowl | <p>Just scale to fit your print bed.</p> | [
"yarn",
"yarnbowl"
] | Hobby & Makers > Other Ideas | [
"316070/images/yarn_bowl_mk3_2022-nov-12_10-54-25pm-000_customizedview19184584965.jpg",
"316070/images/yarn_bowl_mk3_2022-nov-12_10-55-19pm-000_customizedview2291245365.jpg"
] | [
"316070/gcode/Yarn Bowl Mk3 v15__v1.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/316070 | gcodes_0056.tar |
308543 | 3 Tweezer Holder Honey Comb | [] | 3D Printers > Accessories | [
"308543/images/img_4838.jpg"
] | [
"308543/gcode/3 tweezer holder__v0.gcode",
"308543/gcode/3 tweezer holder__v1.gcode",
"308543/gcode/3 tweezer holder__v2.gcode",
"308543/gcode/3 tweezer holder__v3.gcode",
"308543/gcode/3 tweezer holder__v4.gcode",
"308543/gcode/3 tweezer holder__v5.gcode",
"308543/gcode/3 tweezer holder__v6.gcode",
"... | Creative Commons — Attribution | https://www.printables.com/model/308543 | gcodes_0056.tar | |
294292 | IKEA Skadis mini hex bit holder - 4mm | <p>Apply a mirror on the x-axis in your slicer to get the opposite variation (to fit them right above each other).<br><br>Remixed from a remix on Thingiverse.</p><p>Original was BramRausch with this: <a href="https://www.thingiverse.com/thing:2742931">IKEA Skadis drill bit holder</a><br>And the remix I used was from mm... | [
"holder",
"bit",
"hex",
"pegboard",
"wowstick",
"bits",
"skadis",
"4mm"
] | Hobby & Makers > Organizers | [
"294292/images/img_20221013_144649.jpg"
] | [
"294292/gcode/ikea_bit_holder_mini__v0.gcode",
"294292/gcode/ikea_bit_holder_mini__v1.gcode",
"294292/gcode/ikea_bit_holder_mini__v2.gcode",
"294292/gcode/ikea_bit_holder_mini__v3.gcode",
"294292/gcode/ikea_bit_holder_mini__v4.gcode",
"294292/gcode/ikea_bit_holder_mini__v5.gcode",
"294292/gcode/ikea_bit... | Creative Commons — Attribution | https://www.printables.com/model/294292 | gcodes_0056.tar |
289978 | Tamper evident lock | <p>A tamper evident, one-time use lock. Once locked, it has to be destroyed, which is evidently visible.</p><p> </p><p>I remixed this <a href="https://www.thingiverse.com/thing:4607130">model </a>so the overhangs print better and tweaked some tolerances.</p> | [
"lock",
"tamperproof"
] | Gadgets > Other Gadgets | [
"289978/images/fezznplxgamjvps.jpg",
"289978/images/fezzpg9waamhxif.jpg",
"289978/images/fezzo_qwyaafz_d.jpg"
] | [
"289978/gcode/Tamper_evident_lock__v0.gcode",
"289978/gcode/Tamper_evident_lock__v1.gcode",
"289978/gcode/Tamper_evident_lock__v2.gcode",
"289978/gcode/Tamper_evident_lock__v3.gcode",
"289978/gcode/Tamper_evident_lock__v4.gcode",
"289978/gcode/Tamper_evident_lock__v5.gcode",
"289978/gcode/Tamper_evident... | Creative Commons — Public Domain | https://www.printables.com/model/289978 | gcodes_0056.tar |
287171 | Drill Dust Collector |
<p>Made this thing to collect the dust created by drilling holes in a wall.</p>
<p>FYI. The initials shown in the 2nd picture are not in the .stl file included.</p>
Category: Hand Tools
| [
"drill",
"dustcollection",
"thingiverse",
"dustcollector",
"drilldust"
] | Hobby & Makers > Tools | [
"287171/images/large_display_1017190729b_287171.jpg",
"287171/images/large_display_1017190733a_287171.jpg"
] | [
"287171/gcode/Drill_Dust_Collector__v0.gcode",
"287171/gcode/Drill_Dust_Collector__v1.gcode",
"287171/gcode/Drill_Dust_Collector__v2.gcode",
"287171/gcode/Drill_Dust_Collector__v3.gcode",
"287171/gcode/Drill_Dust_Collector__v4.gcode",
"287171/gcode/Drill_Dust_Collector__v5.gcode",
"287171/gcode/Drill_Du... | Creative Commons — Attribution | https://www.printables.com/model/287171 | gcodes_0056.tar |
285320 | Flexy Dog Keychain | <p>I wanted to make a flexible keychain with the profile of a dog, used an image from google and modeled the hinges in somewhat random places. Comment if you want an updated model with looser tolerances. It deflects a full inch or so along the whole body at full bend and it's not so loose that it makes a lot of noise w... | [
"dog",
"articulated",
"flexy",
"flexible",
"keychain"
] | Art & Design > Other Art & Designs | [
"285320/images/img_4036.jpg"
] | [
"285320/gcode/Articulated dog__v0.gcode",
"285320/gcode/Articulated dog__v1.gcode",
"285320/gcode/Articulated dog__v2.gcode",
"285320/gcode/Articulated dog__v3.gcode",
"285320/gcode/Articulated dog__v4.gcode",
"285320/gcode/Articulated dog__v5.gcode",
"285320/gcode/Articulated dog__v6.gcode",
"285320/... | Creative Commons — Attribution | https://www.printables.com/model/285320 | gcodes_0056.tar |
273877 | Filament filter | [
"filter"
] | 3D Printers > Accessories | [
"273877/images/20220910_075845.jpg"
] | [
"273877/gcode/FILAMENT_FILTER__v0.gcode",
"273877/gcode/FILAMENT_FILTER__v1.gcode",
"273877/gcode/FILAMENT_FILTER__v2.gcode",
"273877/gcode/FILAMENT_FILTER__v3.gcode",
"273877/gcode/FILAMENT_FILTER__v4.gcode",
"273877/gcode/FILAMENT_FILTER__v5.gcode",
"273877/gcode/FILAMENT_FILTER__v6.gcode",
"273877/... | Creative Commons — Public Domain | https://www.printables.com/model/273877 | gcodes_0056.tar | |
261454 | Print in place earplugs case | <p>This is a simple earplugs case for travelling or just for storage. It prints in place without the need for supports or other mechanical operations after printing. It might close and open a bit harder at the beginning, but after a few moves it will start to close easily. The tolerances are on the small side.</p> | [
"box",
"case",
"storagebox",
"earplugs",
"earplug",
"earplugcase",
"earplugcontainer"
] | Healthcare > Home Medical Tools | [
"261454/images/cutie-dopuri.jpg",
"261454/images/20220818_232741.jpg",
"261454/images/20220818_232725.jpg",
"261454/images/20220818_232751.jpg",
"261454/images/20220818_232807.jpg"
] | [
"261454/gcode/Cutie dopuri mica__v0.gcode",
"261454/gcode/Cutie dopuri mica__v1.gcode",
"261454/gcode/Cutie dopuri mica__v2.gcode",
"261454/gcode/Cutie dopuri mica__v3.gcode",
"261454/gcode/Cutie dopuri mica__v4.gcode",
"261454/gcode/Cutie dopuri mica__v5.gcode",
"261454/gcode/Cutie dopuri mica__v6.gcod... | Creative Commons — Attribution | https://www.printables.com/model/261454 | gcodes_0056.tar |
260199 | Star fidget etoile | <p>Petit objet simple pour amusement et vérifier les performance d'une imprimante 3d</p><p>S'imprime en place </p><p>Garder a l'échelle pour un bon fonctionnement</p> | [
"star",
"fidget",
"anti",
"etoile"
] | Toys & Games > Other Toys & Games | [
"260199/images/a.jpg",
"260199/images/c.jpg",
"260199/images/20220816_111358.jpg",
"260199/images/b.jpg"
] | [
"260199/gcode/Ninja4__v0.gcode",
"260199/gcode/Ninja4__v1.gcode",
"260199/gcode/Ninja4__v2.gcode",
"260199/gcode/Ninja4__v3.gcode",
"260199/gcode/Ninja4__v4.gcode",
"260199/gcode/Ninja4__v5.gcode",
"260199/gcode/Ninja4__v6.gcode",
"260199/gcode/Ninja4__v7.gcode",
"260199/gcode/Ninja4__v8.gcode",
"... | Creative Commons — Public Domain | https://www.printables.com/model/260199 | gcodes_0056.tar |
247309 | Ender 3 S1 - central Filament Sensor Bracket | <p>Since I've mounted 2 spools on my printer for fast end easy change I created a model to attach the filament sensor - still flexible - in the center.</p><p><i>If you also want a secondary spool, check out my other model: </i><a href="https://www.printables.com/de/model/247270-ender-3-s1-better-secondary-spool-holder"... | [
"filament",
"filamentsensor",
"ender3s1"
] | 3D Printers > Creality Parts & Upgrades | [
"247309/images/22_007612.jpg",
"247309/images/22_007582.jpg",
"247309/images/22_00759.jpg"
] | [
"247309/gcode/filamentsensor_mount__v0.gcode",
"247309/gcode/filamentsensor_mount__v1.gcode",
"247309/gcode/filamentsensor_mount__v2.gcode",
"247309/gcode/filamentsensor_mount__v3.gcode",
"247309/gcode/filamentsensor_mount__v4.gcode",
"247309/gcode/filamentsensor_mount__v5.gcode",
"247309/gcode/filament... | Creative Commons — Attribution | https://www.printables.com/model/247309 | gcodes_0056.tar |
242740 | Filament Shelf | <p>A bracket which you can put a 25mm wooden stick in to it to hold your spools.</p><p>Prints great in PET-G.</p><p>I used 6x40mm screws to mount it to a wooden wall.</p> | [
"prusa",
"shelf",
"spool",
"filament",
"spoolmount",
"filamentshelf"
] | 3D Printers > Accessories | [
"242740/images/uest220716_0840.jpg",
"242740/images/uest220703_0810.jpg",
"242740/images/uest220716_0900.jpg",
"242740/images/uest220716_0901.jpg"
] | [
"242740/gcode/Filament shelf_holder__v2.gcode",
"242740/gcode/Filament shelf_holder__v3.gcode",
"242740/gcode/Filament shelf_holder__v4.gcode",
"242740/gcode/Filament shelf_holder__v5.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/242740 | gcodes_0056.tar |
241989 | Fluffy Unicorn Bank |
<p>This is a remix that utilizes the source idea but it is designed from scratch.</p>
<p>This remix includes:</p>
<ul>
<li>Larger coin slot</li>
<li>Larger access hole</li>
<li>Print in place quarter-turn access plug</li>
</ul>
<p>I found this to be a great little project to make as a gift for my granddaughter's 4th... | [
"printinplace",
"bank",
"piggybank",
"unicorn",
"thingiverse",
"unicorns",
"coinbank"
] | Art & Design > Sculptures | [
"241989/images/large_display_unicorn_bank_resize_241989.jpg",
"241989/images/large_display_fluffy_unicorn_coin_bank_v6_241989.jpg"
] | [
"241989/gcode/Fluffy_Unicorn_Coin_Bank_v6__v0.gcode",
"241989/gcode/Fluffy_Unicorn_Coin_Bank_v6__v1.gcode",
"241989/gcode/Fluffy_Unicorn_Coin_Bank_v6__v2.gcode",
"241989/gcode/Fluffy_Unicorn_Coin_Bank_v6__v3.gcode",
"241989/gcode/Fluffy_Unicorn_Coin_Bank_v6__v4.gcode",
"241989/gcode/Fluffy_Unicorn_Coin_Ba... | Creative Commons — Attribution | https://www.printables.com/model/241989 | gcodes_0056.tar |
235104 | Half moon planter | <p><strong>Half Moon Planter</strong></p><p>A half moon shaped planter for indoor plants and succulents.</p><p>The planter has draining holes and the plate to hold the excess water. </p><p>For color change, you can change filament at height 10 mm.</p><p>Easier print which require no supports. </p><p>For a sph... | [
"plant",
"planter",
"succulent",
"plantpot",
"plants",
"planters",
"planterpot",
"planterspot",
"cactusplanter",
"succulents",
"indoorplantpot",
"indoorplanter",
"succulentpot",
"succulentplanter",
"succulentsplanter"
] | Household > Outdoor & Garden | [
"235104/images/halfmoonplanter.jpg"
] | [
"235104/gcode/HalfMoonPlanter__v0.gcode",
"235104/gcode/HalfMoonPlanter__v1.gcode",
"235104/gcode/HalfMoonPlanter__v2.gcode",
"235104/gcode/HalfMoonPlanter__v3.gcode",
"235104/gcode/HalfMoonPlanter__v4.gcode",
"235104/gcode/HalfMoonPlanter__v5.gcode",
"235104/gcode/HalfMoonPlanter__v6.gcode",
"235104/... | Creative Commons — Attribution | https://www.printables.com/model/235104 | gcodes_0057.tar |
234832 | Scissors holder for IKEA Skadis x3 |
<p>This is a remix of 3dball's scissor holder that can hold three scissors.</p>
<h3>How I Designed This</h3>
<p><strong>Tinkercad source</strong></p>
<div><p><a href="https://www.tinkercad.com/things/8gqOHpHkfzw-scissors-holder-for-ikea-skadis-x3" rel="nofollow">https://www.tinkercad.com/things/8gqOHpHkfzw-scissors-... | [
"ikea",
"pegboard",
"thingiverse",
"ikeaskadis"
] | Hobby & Makers > Other Ideas | [
"234832/images/large_display_scissors_holder_for_ikea_skadis_x3_.jpg"
] | [
"234832/gcode/Scissors_holder_for_IKEA_Skadis_x3__v0.gcode",
"234832/gcode/Scissors_holder_for_IKEA_Skadis_x3__v1.gcode",
"234832/gcode/Scissors_holder_for_IKEA_Skadis_x3__v2.gcode",
"234832/gcode/Scissors_holder_for_IKEA_Skadis_x3__v3.gcode",
"234832/gcode/Scissors_holder_for_IKEA_Skadis_x3__v4.gcode",
"... | Creative Commons — Attribution | https://www.printables.com/model/234832 | gcodes_0057.tar |
219476 | StrawHat Pirates Logo - One Piece | <p>For a good result i suggest you tu use 4 colors (black, white, yellow and red) but also balck and white is cool to!</p><p>Using your slicer you must add 4 changing color pauses:</p><ul><li>0-10mm : black</li><li>10-11mm: white</li><li>11-12mm: yellow</li><li>12-13mm: red</li></ul> | [
"logo",
"one",
"piece",
"strawhat",
"onepicelogo",
"onepice"
] | Costumes & Accessories > Props | [
"219476/images/mg_6161.jpg",
"219476/images/mg_6162.jpg"
] | [
"219476/gcode/One Piece Logo v1__v0.gcode",
"219476/gcode/One Piece Logo v1__v1.gcode",
"219476/gcode/One Piece Logo v1__v2.gcode",
"219476/gcode/One Piece Logo v1__v3.gcode",
"219476/gcode/One Piece Logo v1__v4.gcode",
"219476/gcode/One Piece Logo v1__v5.gcode",
"219476/gcode/One Piece Logo v1__v6.gcod... | Creative Commons — Public Domain | https://www.printables.com/model/219476 | gcodes_0057.tar |
216947 | Tpu piece for antivibration Feet | <p>As mentioned, is a tpu piece to attach to the anti vibration feet, in case you dont have the "bicycle inner tube" which is mentioned in the description.</p><p>https://www.printables.com/model/1727-anti-vibration-feet-for-prusa-mk3-and-prusa-mini</p> | [
"mk3",
"mk3s",
"tpu",
"feet",
"rubber",
"antivibration",
"band"
] | 3D Printers > Other Printer Parts & Upgrades | [
"216947/images/feet1.jpg",
"216947/images/feet2.jpg"
] | [
"216947/gcode/Tpu band__v0.gcode",
"216947/gcode/Tpu band__v1.gcode",
"216947/gcode/Tpu band__v2.gcode",
"216947/gcode/Tpu band__v3.gcode",
"216947/gcode/Tpu band__v4.gcode",
"216947/gcode/Tpu band__v5.gcode",
"216947/gcode/Tpu band__v6.gcode",
"216947/gcode/Tpu band__v7.gcode",
"216947/gcode/Tpu ba... | Creative Commons — Public Domain | https://www.printables.com/model/216947 | gcodes_0057.tar |
210397 | pot lid holder |
<p>pot lid holder</p>
Category: Kitchen & Dining
| [
"kitchen",
"pot",
"holder",
"lid",
"thingiverse"
] | Household > Kitchen | [
"210397/images/35093b0c8f795997055844edae81fc6b_display_large_21.jpg",
"210397/images/54e96ffcd269d2a82d8722daecd0821c_display_large_21.jpg"
] | [
"210397/gcode/topfdeckelHalter__v0.gcode",
"210397/gcode/topfdeckelHalter__v1.gcode",
"210397/gcode/topfdeckelHalter__v2.gcode",
"210397/gcode/topfdeckelHalter__v3.gcode",
"210397/gcode/topfdeckelHalter__v4.gcode",
"210397/gcode/topfdeckelHalter__v5.gcode",
"210397/gcode/topfdeckelHalter__v6.gcode",
"... | Creative Commons — Attribution | https://www.printables.com/model/210397 | gcodes_0057.tar |
206748 | Cable holder | <p>For holding cables on table.</p> | [
"holder",
"cable"
] | Household > Other House Equipment | [
"206748/images/cable_holder_2022-may-16_07-53-23am-000_customize.jpg"
] | [
"206748/gcode/Cable_holder v1__v0.gcode",
"206748/gcode/Cable_holder v1__v1.gcode",
"206748/gcode/Cable_holder v1__v2.gcode",
"206748/gcode/Cable_holder v1__v3.gcode",
"206748/gcode/Cable_holder v1__v4.gcode",
"206748/gcode/Cable_holder v1__v5.gcode",
"206748/gcode/Cable_holder v1__v6.gcode",
"206748/... | Creative Commons — Public Domain | https://www.printables.com/model/206748 | gcodes_0057.tar |
199258 | Another Gear Fidget :) |
<p>So just another Fidget,</p>
<p>The print is in place, the tolerance needed is 0.3 mm. So your printer must be accurate enough for those 0.3mm.</p>
<h3>Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Wanhao</p>
<p class="detail-setting printer"><strong>Printer: </strong>
<div><p>Duplicator9</p></div>... | [
"fidget",
"gear",
"thingiverse"
] | Gadgets > Other Gadgets | [
"199258/images/large_display_fidget_2_full_199258.jpg",
"199258/images/large_display_f2_199258.jpg"
] | [
"199258/gcode/Fidget_2_Full__v0.gcode",
"199258/gcode/Fidget_2_Full__v1.gcode",
"199258/gcode/Fidget_2_Full__v2.gcode",
"199258/gcode/Fidget_2_Full__v3.gcode",
"199258/gcode/Fidget_2_Full__v4.gcode",
"199258/gcode/Fidget_2_Full__v5.gcode",
"199258/gcode/Fidget_2_Full__v6.gcode",
"199258/gcode/Fidget_2... | Creative Commons — Attribution | https://www.printables.com/model/199258 | gcodes_0057.tar |
189730 | Sunlu Filadryer S1 / S2 tray | <p>The S2 version of the dryer goes up to 70C, so I figured this is enough to dry reusable silica gel or even annealing PLA prints.<br>This tray goes on top of the rollers so that things don't touch the heater directly. Fits both of Sunlu's dryers (maybe some others too, I don't have one to try).<br>Print out of someth... | [
"drybox",
"tray",
"dryer",
"filadryer",
"sunlu"
] | 3D Printers > Accessories | [
"189730/images/img_20220502_122020_7.jpg",
"189730/images/img_20220502_121558_3.jpg",
"189730/images/img_20220502_121640_6.jpg",
"189730/images/img_20220502_121628_3.jpg"
] | [
"189730/gcode/Filadryer_Tray__v0.gcode",
"189730/gcode/Filadryer_Tray__v1.gcode",
"189730/gcode/Filadryer_Tray__v2.gcode",
"189730/gcode/Filadryer_Tray__v3.gcode",
"189730/gcode/Filadryer_Tray__v4.gcode",
"189730/gcode/Filadryer_Tray__v5.gcode",
"189730/gcode/Filadryer_Tray__v6.gcode",
"189730/gcode/F... | Creative Commons — Attribution | https://www.printables.com/model/189730 | gcodes_0057.tar |
189076 | Vallejo 17ml Printable Cap |
<p>Designed 3D printable Vallejo 17ml Cap. Some of the caps on my paint set were splitting and I didn't have any spare empty bottles to reuse the caps. So, I designed this printable version to do the job.</p>
<p>Printing:</p>
<p>Printed at 0.15mm layer height using 0.40mm nozzle.</p>
<p>Fillament use was PLA, but yo... | [
"thingiverse",
"vallejo"
] | Hobby & Makers > Other Ideas | [
"189076/images/large_display_vallejo_cap_189076.jpg",
"189076/images/large_display_vallejo_17ml_bottle_cap_189076.jpg",
"189076/images/large_display_a_189076.jpg",
"189076/images/large_display_b_189076.jpg",
"189076/images/large_display_c_189076.jpg"
] | [
"189076/gcode/Vallejo_Cap__v0.gcode",
"189076/gcode/Vallejo_Cap__v1.gcode",
"189076/gcode/Vallejo_Cap__v2.gcode",
"189076/gcode/Vallejo_Cap__v3.gcode",
"189076/gcode/Vallejo_Cap__v4.gcode",
"189076/gcode/Vallejo_Cap__v5.gcode",
"189076/gcode/Vallejo_Cap__v6.gcode",
"189076/gcode/Vallejo_Cap__v7.gcode"... | Creative Commons — Attribution | https://www.printables.com/model/189076 | gcodes_0057.tar |
187584 | Gridfinity Stationery Holder | <p>I like to keep some pens and notebooks next to my 3D printer. So, I designed this 3x1 component for the Gridfinity system to do just that. And it holds a few rulers too. It can hold 5 pens, up to 3 pocket notebooks (like Field Notes or any other 3.5” x 5.5” pocket notebook), and 3 rulers. </p><p>You could alter... | [
"holder",
"pen",
"pocket",
"ruler",
"notebook",
"stationary",
"notes",
"stationery",
"field",
"gridfinity",
"stationeryholder",
"stationaryholder"
] | Hobby & Makers > Organizers | [
"187584/images/222b0ade-393d-413b-a435-a465492aaf00.jpg"
] | [
"187584/gcode/Gridfinity Pen PocketNtBk Ruler Holder v1__v0.gcode",
"187584/gcode/Gridfinity Pen PocketNtBk Ruler Holder v1__v1.gcode",
"187584/gcode/Gridfinity Pen PocketNtBk Ruler Holder v1__v2.gcode",
"187584/gcode/Gridfinity Pen PocketNtBk Ruler Holder v1__v3.gcode",
"187584/gcode/Gridfinity Pen PocketN... | Creative Commons — Attribution | https://www.printables.com/model/187584 | gcodes_0057.tar |
178049 | astronaut keychain | <p>Astronaut test print , </p><p>i addes a ring on top for use like keychain</p><p>printer ; longer lk4 pro</p><p>filament : sunlu pla+ silver</p> | [
"space",
"gift",
"easytoprint",
"keyholder",
"keychain",
"key",
"keyring",
"gifts",
"easyprint",
"keyrings",
"keychains",
"3dkeychain",
"astronaut",
"nosupports",
"matterhackers",
"personalizedkeychain"
] | Art & Design > Other Art & Designs | [
"178049/images/img_20220413_201900.jpg",
"178049/images/img_20220413_201852.jpg"
] | [
"178049/gcode/Astronaut__key__v0.gcode",
"178049/gcode/Astronaut__key__v1.gcode",
"178049/gcode/Astronaut__key__v2.gcode",
"178049/gcode/Astronaut__key__v3.gcode",
"178049/gcode/Astronaut__key__v4.gcode",
"178049/gcode/Astronaut__key__v5.gcode",
"178049/gcode/Astronaut__key__v6.gcode",
"178049/gcode/A... | Creative Commons — Public Domain | https://www.printables.com/model/178049 | gcodes_0057.tar |
171174 | LBOXX Mounting plate | <p>This is the "repaired" STL file of the Sortimo L-BOXX anchor clip designed by FransW.</p><p>A brilliant design but it had some issues when slicing. So I fixed it using meshmixer. This version now prints flawless with any slicer.</p><p>A building instruction how to use these anchor clips can be found here: </p><... | [
"thingiverse",
"lboxx",
"sortimoboxes",
"boschlboxx"
] | Household > Other House Equipment | [
"171174/images/large_display_lboxx_img_0742_171174.jpg",
"171174/images/large_display_clip_lboxx_repaired_1_171174.jpg"
] | [
"171174/gcode/Clip_LBoxx_repaired_1__v0.gcode",
"171174/gcode/Clip_LBoxx_repaired_1__v1.gcode",
"171174/gcode/Clip_LBoxx_repaired_1__v2.gcode",
"171174/gcode/Clip_LBoxx_repaired_1__v3.gcode",
"171174/gcode/Clip_LBoxx_repaired_1__v4.gcode",
"171174/gcode/Clip_LBoxx_repaired_1__v5.gcode",
"171174/gcode/Cl... | Creative Commons — Attribution | https://www.printables.com/model/171174 | gcodes_0057.tar |
165595 | Cube | [
"cube"
] | Learning > Math | [
"165595/images/cube.jpg"
] | [
"165595/gcode/Cube__v0.gcode",
"165595/gcode/Cube__v1.gcode",
"165595/gcode/Cube__v2.gcode",
"165595/gcode/Cube__v3.gcode",
"165595/gcode/Cube__v4.gcode",
"165595/gcode/Cube__v5.gcode",
"165595/gcode/Cube__v6.gcode",
"165595/gcode/Cube__v7.gcode",
"165595/gcode/Cube__v8.gcode",
"165595/gcode/Cube_... | Creative Commons — Public Domain | https://www.printables.com/model/165595 | gcodes_0057.tar | |
163683 | Ikea Skadis Hook 80mm | <p>To be printed on its side</p> | [
"ikea",
"ikeaskadis"
] | Household > Office | [
"163683/images/ikea-skadis-hook-80mm.jpg"
] | [
"163683/gcode/ikea skadis hook 80mm__v0.gcode",
"163683/gcode/ikea skadis hook 80mm__v1.gcode",
"163683/gcode/ikea skadis hook 80mm__v2.gcode",
"163683/gcode/ikea skadis hook 80mm__v3.gcode",
"163683/gcode/ikea skadis hook 80mm__v4.gcode",
"163683/gcode/ikea skadis hook 80mm__v5.gcode",
"163683/gcode/ik... | Creative Commons — Attribution | https://www.printables.com/model/163683 | gcodes_0057.tar |
163066 | Toothbrush Travel Case | <p>This is a simple toothbrush travel case. If you travel, and you brush your teeth, this model might be right for you.</p> | [
"hygiene",
"travel",
"toothbrushholder"
] | Household > Bathroom | [
"163066/images/img_1569.jpg",
"163066/images/img_1568.jpg",
"163066/images/screen-shot-2022-04-05-at-33646-pm.jpg"
] | [
"163066/gcode/Toothbrush_Travel_Case_v1__v0.gcode",
"163066/gcode/Toothbrush_Travel_Case_v1__v1.gcode",
"163066/gcode/Toothbrush_Travel_Case_v1__v2.gcode",
"163066/gcode/Toothbrush_Travel_Case_v1__v3.gcode",
"163066/gcode/Toothbrush_Travel_Case_v1__v4.gcode",
"163066/gcode/Toothbrush_Travel_Case_v1__v5.gc... | Creative Commons — Public Domain | https://www.printables.com/model/163066 | gcodes_0057.tar |
157433 | Skull | [] | Costumes & Accessories > Props | [
"157433/images/20220330_202422.jpg"
] | [
"157433/gcode/skull__v0.gcode",
"157433/gcode/skull__v1.gcode",
"157433/gcode/skull__v2.gcode",
"157433/gcode/skull__v3.gcode",
"157433/gcode/skull__v4.gcode",
"157433/gcode/skull__v5.gcode",
"157433/gcode/skull__v6.gcode",
"157433/gcode/skull__v7.gcode",
"157433/gcode/skull__v8.gcode",
"157433/gc... | Creative Commons — Public Domain | https://www.printables.com/model/157433 | gcodes_0057.tar | |
154654 | Bruni from Frozen | <p>A 3D model of the Disney creature “Bruni” from the movie “Frozen 2”. </p><p>Created with the surface features in Solidworks</p> | [
"character",
"animation",
"dragon",
"animal",
"cute",
"disney",
"frozen",
"bruni",
"salamander",
"frozen2",
"elsa"
] | Toys & Games > Action Figures & Statues | [
"154654/images/275733231_437275188154624_3381318956426853110_n.jpg",
"154654/images/knipsel.jpg"
] | [
"154654/gcode/Bruni-3Dprint__v4.gcode",
"154654/gcode/Bruni-3Dprint__v6.gcode",
"154654/gcode/Bruni-3Dprint__v7.gcode",
"154654/gcode/Bruni-3Dprint__v8.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/154654 | gcodes_0057.tar |
147317 | Simple filament clip | <p>Super simple filament holder for prusament spools</p><p>infill: 100%</p><p>layer hight: 0,15</p> | [
"spoolholder",
"fillament"
] | 3D Printers > Other Printer Parts & Upgrades | [
"147317/images/20220308_152330.jpg",
"147317/images/20220308_152522.jpg",
"147317/images/20220308_150314.jpg"
] | [
"147317/gcode/2.0 Super simple fillament holder for prusament__v0.gcode",
"147317/gcode/2.0 Super simple fillament holder for prusament__v1.gcode",
"147317/gcode/2.0 Super simple fillament holder for prusament__v2.gcode",
"147317/gcode/2.0 Super simple fillament holder for prusament__v3.gcode",
"147317/gcod... | Creative Commons — Public Domain | https://www.printables.com/model/147317 | gcodes_0057.tar |
146586 | Small Boat |
<p>A small boat. It floats upright in water.</p>
<p>Please post a make if you print one. ;)</p>
<h3>Print Settings</h3>
<p><strong>Printer:</strong></p>
<p>Anet A8 with lots of upgrades</p>
<p class="detail-setting rafts"><strong>Rafts: </strong>
<div><p>Doesn't Matter</p></div>
<p><strong>Supports:</strong></p>
<p>... | [
"toy",
"boat",
"toys",
"thingiverse"
] | Toys & Games > Outdoor Toys | [
"146586/images/103aed99356cdb3ddbd8de7ba1c0be14_display_large_14.jpg",
"146586/images/cfa7b1e69e78d29dbb5795403d873368_display_large_14.jpg",
"146586/images/b8566ad4d9f1b2300a201bdf4f721635_display_large_14.jpg",
"146586/images/c402f3a4ef157299f496374718a88931_display_large_14.jpg",
"146586/images/ac24f6672... | [
"146586/gcode/Boat-2.0__v0.gcode",
"146586/gcode/Boat-2.0__v1.gcode",
"146586/gcode/Boat-2.0__v2.gcode",
"146586/gcode/Boat-2.0__v3.gcode",
"146586/gcode/Boat-2.0__v4.gcode",
"146586/gcode/Boat-2.0__v5.gcode",
"146586/gcode/Boat-2.0__v6.gcode",
"146586/gcode/Boat-2.0__v7.gcode",
"146586/gcode/Boat-2... | Creative Commons — Attribution | https://www.printables.com/model/146586 | gcodes_0057.tar |
137742 | Ikea Skadis Spacer | <p>This is an alternative spacer for Ikea Skadis with a length of 24mm.</p><p>This spacer kann be used with the orginal Ikea screw or just with any M4 screw.</p><p>It has a printable thread. But if this doesn't work for you, you can press fit a M4 nut instead. </p><p>The original spacer is 20mm long. When I mounte... | [
"ikea",
"wallmount",
"spacer",
"skadis",
"ikeaskadis",
"skadisikea",
"abstandhalter",
"abstandshalter",
"skadismount"
] | Hobby & Makers > Organizers | [
"137742/images/20220222_135820.jpg"
] | [
"137742/gcode/Ikea_Skadis_spacer_24mm__v0.gcode",
"137742/gcode/Ikea_Skadis_spacer_24mm__v1.gcode",
"137742/gcode/Ikea_Skadis_spacer_24mm__v2.gcode",
"137742/gcode/Ikea_Skadis_spacer_24mm__v3.gcode",
"137742/gcode/Ikea_Skadis_spacer_24mm__v4.gcode",
"137742/gcode/Ikea_Skadis_spacer_24mm__v5.gcode",
"137... | Creative Commons — Public Domain | https://www.printables.com/model/137742 | gcodes_0057.tar |
133193 | Game Boy Color Mini Stand | [
"gameboy",
"nintendo",
"retrogaming",
"gbc",
"gameboycolor"
] | Gadgets > Video Games | [
"133193/images/img_2745.jpg"
] | [
"133193/gcode/GBC Stand v22__v0.gcode",
"133193/gcode/GBC Stand v22__v1.gcode",
"133193/gcode/GBC Stand v22__v2.gcode",
"133193/gcode/GBC Stand v22__v3.gcode",
"133193/gcode/GBC Stand v22__v4.gcode",
"133193/gcode/GBC Stand v22__v5.gcode",
"133193/gcode/GBC Stand v22__v6.gcode",
"133193/gcode/GBC Stan... | Creative Commons — Attribution | https://www.printables.com/model/133193 | gcodes_0057.tar | |
129645 | SFP(+) Dust Cover | <p>Needs to be printed <strong>with a raft</strong> and <strong>without</strong> <strong>supports</strong>!</p><p>I used Greentec PRO and printed batches for 40 on a Voron V0, 90 Degrees Celsius Bed, 235 material.<br><br>Likely works with PETG/PLA as well</p> | [
"switch",
"fiber",
"network",
"sfp",
"fiberoptics"
] | Gadgets > Other Gadgets | [
"129645/images/img_4265.jpg"
] | [
"129645/gcode/SFP_CAP_v2__v0.gcode",
"129645/gcode/SFP_CAP_v2__v1.gcode",
"129645/gcode/SFP_CAP_v2__v2.gcode",
"129645/gcode/SFP_CAP_v2__v3.gcode",
"129645/gcode/SFP_CAP_v2__v4.gcode",
"129645/gcode/SFP_CAP_v2__v5.gcode",
"129645/gcode/SFP_CAP_v2__v6.gcode",
"129645/gcode/SFP_CAP_v2__v7.gcode",
"129... | GNU General Public License v2.0 | https://www.printables.com/model/129645 | gcodes_0057.tar |
126147 | Air Jordan I pen holder |
<p>Nike Air Jordan IV pen holder remixed from benben0115 model</p>
<p>This is a remix from <a href="https://www.thingiverse.com/thing:398515">https://www.thingiverse.com/thing:398515</a></p>
<h3> Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Creality</p>
<p><p class="detail-setting printer"><strong>P... | [
"art",
"sneakers",
"penholder",
"pencilholder",
"thingiverse",
"nba",
"basketball",
"nike",
"sneaker",
"jordan"
] | Household > Office | [
"126147/images/large_display_jordan_1_penholder_126147.jpg"
] | [
"126147/gcode/jordan_1_penholder__v0.gcode",
"126147/gcode/jordan_1_penholder__v1.gcode",
"126147/gcode/jordan_1_penholder__v2.gcode",
"126147/gcode/jordan_1_penholder__v3.gcode",
"126147/gcode/jordan_1_penholder__v4.gcode",
"126147/gcode/jordan_1_penholder__v5.gcode",
"126147/gcode/jordan_1_penholder__... | Creative Commons — Attribution | https://www.printables.com/model/126147 | gcodes_0057.tar |
125918 | Cable Clip 4 mm | <figure class="image image-style-align-center"><img src="https://media.printables.com/media/prints/125918/rich_content/0f0c25a7-ab7a-4a6e-8bb4-17459cd8679b/nail_12x20_din1151.png#%7B%22uuid%22%3A%22399275cb-dfc2-4300-a45e-df1934209e82%22%2C%22w%22%3A603%2C%22h%22%3A161%7D"></figure> | [
"cableclip"
] | Household > Other House Equipment | [
"125918/images/cableclip_4mm.jpg"
] | [
"125918/gcode/CableClip_4mm__v0.gcode",
"125918/gcode/CableClip_4mm__v1.gcode",
"125918/gcode/CableClip_4mm__v2.gcode",
"125918/gcode/CableClip_4mm__v3.gcode",
"125918/gcode/CableClip_4mm__v4.gcode",
"125918/gcode/CableClip_4mm__v5.gcode",
"125918/gcode/CableClip_4mm__v6.gcode",
"125918/gcode/CableCli... | Creative Commons — Attribution | https://www.printables.com/model/125918 | gcodes_0057.tar |
125439 | Universal, Non-Destructive 1.75mm Filament Clip | <p>Please give it a ❤ if it works for you. 🤠👍</p><p>I've used a similar filament clip that holds pretty well, but I always seemed to have to trim off 1 ½ inches worth of filament because of the permanent bend after removing the clip. This one uses a similar design, but doesn't impart any lasting bend to the filament.... | [
"filament",
"clip",
"3dprinting",
"accessory"
] | 3D Printers > Accessories | [
"125439/images/img_1421.jpg",
"125439/images/img_1429.jpg",
"125439/images/img_1423.jpg",
"125439/images/img_1424.jpg"
] | [
"125439/gcode/Filament_Clip_1.75_JG_v.05__v0.gcode",
"125439/gcode/Filament_Clip_1.75_JG_v.05__v1.gcode",
"125439/gcode/Filament_Clip_1.75_JG_v.05__v2.gcode",
"125439/gcode/Filament_Clip_1.75_JG_v.05__v3.gcode",
"125439/gcode/Filament_Clip_1.75_JG_v.05__v4.gcode",
"125439/gcode/Filament_Clip_1.75_JG_v.05_... | Creative Commons — Public Domain | https://www.printables.com/model/125439 | gcodes_0057.tar |
123877 | Klipper Pressure Advance Tower V2 | <p>I prefer this model better than the original.<br>Lightweight, fast, & easier to read.</p><p>Print:<br>1 Bottom layer<br>0.2mm layer height<br>1 Perimeter<br>0 Top layer<br>0 Infill</p><p>Set all speeds to 100mm/s, <strong>except the first layer speed.</strong> Use your default value.</p><p><br>Important in Prusa... | [
"calibration",
"tower",
"pressure",
"klipper",
"pressureadvance"
] | 3D Printers > Test Models | [
"123877/images/img_20220124_205716.jpg",
"123877/images/img_20220124_205615.jpg"
] | [
"123877/gcode/Klipper Pressure Advance Tower V2__v0.gcode",
"123877/gcode/Klipper Pressure Advance Tower V2__v1.gcode",
"123877/gcode/Klipper Pressure Advance Tower V2__v2.gcode",
"123877/gcode/Klipper Pressure Advance Tower V2__v3.gcode",
"123877/gcode/Klipper Pressure Advance Tower V2__v4.gcode",
"12387... | Creative Commons — Public Domain | https://www.printables.com/model/123877 | gcodes_0057.tar |
116849 | Improved Dial Knob for Prusa i3 MK2/MK3 | <p>Description from original print by onethou on thingiverse:</p><p> </p><p>I find the factory dial knob on the Original Prusa i3 MK3 printer a bit tiny and awkward to fiddle around with. So I set out to design a "better" and more ergonomic one. I was inspired by the serrated dial knobs often found on vintage elec... | [
"knob",
"lcdknob",
"potentiometerknob",
"prusaknob",
"chamfered",
"serrated"
] | 3D Printers > Accessories | [
"116849/images/2963c92a7569e342a3df9f8b443c42ab_display_large.jpg"
] | [
"116849/gcode/Prusa_Knob__v0.gcode",
"116849/gcode/Prusa_Knob__v1.gcode",
"116849/gcode/Prusa_Knob__v2.gcode",
"116849/gcode/Prusa_Knob__v3.gcode",
"116849/gcode/Prusa_Knob__v4.gcode",
"116849/gcode/Prusa_Knob__v5.gcode",
"116849/gcode/Prusa_Knob__v6.gcode",
"116849/gcode/Prusa_Knob__v7.gcode",
"116... | Creative Commons — Attribution | https://www.printables.com/model/116849 | gcodes_0057.tar |
110125 | STATUE OF LIBERTY NATIONAL MONUMENT | <p>This is a remix of the model <a href="https://cults3d.com/en/3d-model/architecture/statue-of-liberty-national-monument">https://cults3d.com/en/3d-model/architecture/statue-of-liberty-national-monument</a> by peternak3d, which has many issues with printability. There is also a small part from <a href="https://www.thi... | [
"statue",
"famous",
"usa",
"france",
"thingiverse",
"newyork",
"statueofliberty",
"ladyliberty"
] | Art & Design > Sculptures | [
"110125/images/large_display_body6_110125.jpg",
"110125/images/2021-12-21_185500_110125.jpg"
] | [
"110125/gcode/Body6_110125__v0.gcode",
"110125/gcode/Body6_110125__v1.gcode",
"110125/gcode/Body6_110125__v2.gcode",
"110125/gcode/Body6_110125__v3.gcode",
"110125/gcode/Body6_110125__v4.gcode",
"110125/gcode/Body6_110125__v5.gcode",
"110125/gcode/Body6_110125__v6.gcode",
"110125/gcode/Body6_110125__v... | Creative Commons — Attribution | https://www.printables.com/model/110125 | gcodes_0057.tar |
105361 | Teigblume / Turning Tool for Thermomix (by McBohl) | <p>The turning tool is a small helper for the Thermomix (TM5) from the company Vorwerk for easier removal of dough.</p><p>It was designed by <a href="https://www.thingiverse.com/mcbohl">McBohl</a>. You can find his publication on <a href="https://www.thingiverse.com/thing:1288487">thingiverse</a>.</p><p>With this one c... | [
"kitchen",
"kitchentool",
"thermomix",
"kueche",
"thermomixtm5"
] | Household > Kitchen | [
"105361/images/0fdcfcdb-d838-493a-9fbc-695e3672bab4.jpg",
"105361/images/20211225_154937000_ios.jpg"
] | [
"105361/gcode/Teigblume__v0.gcode",
"105361/gcode/Teigblume__v1.gcode",
"105361/gcode/Teigblume__v2.gcode",
"105361/gcode/Teigblume__v3.gcode",
"105361/gcode/Teigblume__v4.gcode",
"105361/gcode/Teigblume__v5.gcode",
"105361/gcode/Teigblume__v6.gcode",
"105361/gcode/Teigblume__v7.gcode",
"105361/gcod... | Creative Commons — Attribution | https://www.printables.com/model/105361 | gcodes_0057.tar |
105292 | Bag clamp [hinged, print in place] | <p>The model in the pictures is printed on a 0.8 nozzle and 0.25 layer height and 1mm layer width in PLA. But the model should work with the normal 0.4mm or 0.6mm nozzles as well. Just slice for your printer. You can use 0.25mm layer height on those nozzles as well.</p><p>Tolerance in the model is set to 0.25mm.</p><p>... | [
"bag",
"hinge",
"printinplace",
"pla",
"joint",
"snap",
"clamp",
"bagclip",
"hinged",
"bagclamp"
] | Household > Kitchen | [
"105292/images/clipping.jpg",
"105292/images/hinge.jpg",
"105292/images/img_0838.jpg",
"105292/images/img_0835.jpg",
"105292/images/img_0836.jpg",
"105292/images/hingesection.jpg",
"105292/images/clampsection.jpg"
] | [
"105292/gcode/BagClip__v0.gcode",
"105292/gcode/BagClip__v1.gcode",
"105292/gcode/BagClip__v2.gcode",
"105292/gcode/BagClip__v3.gcode",
"105292/gcode/BagClip__v4.gcode",
"105292/gcode/BagClip__v5.gcode",
"105292/gcode/BagClip__v6.gcode",
"105292/gcode/BagClip__v7.gcode",
"105292/gcode/BagClip__v8.gc... | Creative Commons — Attribution | https://www.printables.com/model/105292 | gcodes_0058.tar |
103609 | Harley-Davidson keychain | <p>Any print settings will work, however to get the best details and print quality use a 0.25mm nozzle, but a 0.4mm nozzle could also work fine!</p><p>Change the x and y axis percentage to adjust the size of the Harley-Davidson keychain to your preference!</p> | [
"motor",
"keychain",
"harley",
"motorcycle",
"keychains",
"3dkeychain",
"chopper",
"harleydavidson",
"harleydavidsson"
] | Fashion > Other Fashion Accessories | [
"103609/images/harley-davidson-keychain.jpg",
"103609/images/img-20191020-wa0031.jpg"
] | [
"103609/gcode/Harley-Davidson Keychain__v0.gcode",
"103609/gcode/Harley-Davidson Keychain__v1.gcode",
"103609/gcode/Harley-Davidson Keychain__v2.gcode",
"103609/gcode/Harley-Davidson Keychain__v3.gcode",
"103609/gcode/Harley-Davidson Keychain__v4.gcode",
"103609/gcode/Harley-Davidson Keychain__v5.gcode",
... | Creative Commons — Attribution | https://www.printables.com/model/103609 | gcodes_0058.tar |
101337 | Makita Battery Holder | [
"makita",
"batteryholder",
"18v",
"makita18v"
] | Hobby & Makers > Other Ideas | [
"101337/images/20211016_141727.jpg"
] | [
"101337/gcode/Trager__v0.gcode",
"101337/gcode/Trager__v1.gcode",
"101337/gcode/Trager__v2.gcode",
"101337/gcode/Trager__v3.gcode",
"101337/gcode/Trager__v4.gcode",
"101337/gcode/Trager__v5.gcode",
"101337/gcode/Trager__v6.gcode",
"101337/gcode/Trager__v7.gcode",
"101337/gcode/Trager__v8.gcode",
"... | Creative Commons — Public Domain | https://www.printables.com/model/101337 | gcodes_0058.tar | |
97114 | Bitcoin | <p>Printed 0.3 layer height<br>20% Infill<br>No supports</p> | [
"coin",
"money",
"cryptocurrency",
"blockchain",
"bitcoin",
"crypto",
"thingiverse",
"cryptocoin"
] | Art & Design > Other Art & Designs | [
"97114/images/8b08b4b18f0f657217f2ee625c28920d_display_large_97.jpg"
] | [
"97114/gcode/bitcoin__v0.gcode",
"97114/gcode/bitcoin__v1.gcode",
"97114/gcode/bitcoin__v2.gcode",
"97114/gcode/bitcoin__v3.gcode",
"97114/gcode/bitcoin__v4.gcode",
"97114/gcode/bitcoin__v5.gcode",
"97114/gcode/bitcoin__v6.gcode",
"97114/gcode/bitcoin__v7.gcode",
"97114/gcode/bitcoin__v8.gcode",
"... | Creative Commons — Attribution | https://www.printables.com/model/97114 | gcodes_0058.tar |
96039 | Escher lizards | <p>Escher lizard fun to show all the filament colors you have.<br>There is 0.15mm clearance between the model so keep that in mind when scaling down</p> | [
"puzzle",
"lizard",
"thingiverse",
"escher",
"lizards",
"lizzard",
"lizzards",
"mcescher"
] | Art & Design > Other Art & Designs | [
"96039/images/large_display_20201202_115428_96039.jpg"
] | [
"96039/gcode/escher_lizzard__v0.gcode",
"96039/gcode/escher_lizzard__v1.gcode",
"96039/gcode/escher_lizzard__v2.gcode",
"96039/gcode/escher_lizzard__v3.gcode",
"96039/gcode/escher_lizzard__v4.gcode",
"96039/gcode/escher_lizzard__v5.gcode",
"96039/gcode/escher_lizzard__v6.gcode",
"96039/gcode/escher_li... | Creative Commons — Attribution | https://www.printables.com/model/96039 | gcodes_0058.tar |
94435 | Samsung TV remote holder |
<p>This is a simple TV remote holder that attaches to a wall or flat surface.</p>
<p>The model is designed to use Gorilla mounting tape but it also has 2 4mm holes with a 1mm chamfer.</p>
<p>To note there is no issue with the Gorilla tape sticking to any surface that i have found</p>
<h3> Print Settings</h3>
<p><stron... | [
"samsung",
"remote",
"remotecontrol",
"thingiverse",
"remoteholder",
"remotecontrolholder",
"tvremote"
] | Hobby & Makers > Other Ideas | [
"94435/images/large_display_capture_94435.jpg",
"94435/images/large_display_holder_94435.jpg",
"94435/images/large_display_capture1_94435.jpg",
"94435/images/large_display_fusion_back_94435.jpg",
"94435/images/large_display_fusion_pic_94435.jpg"
] | [
"94435/gcode/Holder__v0.gcode",
"94435/gcode/Holder__v1.gcode",
"94435/gcode/Holder__v2.gcode",
"94435/gcode/Holder__v3.gcode",
"94435/gcode/Holder__v4.gcode",
"94435/gcode/Holder__v5.gcode",
"94435/gcode/Holder__v6.gcode",
"94435/gcode/Holder__v7.gcode",
"94435/gcode/Holder__v8.gcode",
"94435/gco... | Creative Commons — Attribution | https://www.printables.com/model/94435 | gcodes_0058.tar |
94200 | Toy Wood Train Track / Spielzeug Holzeisenbahn Schienen / Kreuzung Kurve 3 / BRIO Thomas IKEA eBay kompatibel |
<p>Bilder sagen mehr als 1000 Worte<br/>
Pictures say more than 1000 words</p>
Category: Mechanical Toys
| [
"thingiverse"
] | Toys & Games > Other Toys & Games | [
"94200/images/kreuzungkurve3_display_large_94200.jpg",
"94200/images/kreuzungkurve3_display_large_94200.jpg"
] | [
"94200/gcode/kreuzungKurve3__v0.gcode",
"94200/gcode/kreuzungKurve3__v1.gcode",
"94200/gcode/kreuzungKurve3__v2.gcode",
"94200/gcode/kreuzungKurve3__v3.gcode",
"94200/gcode/kreuzungKurve3__v4.gcode",
"94200/gcode/kreuzungKurve3__v5.gcode",
"94200/gcode/kreuzungKurve3__v6.gcode",
"94200/gcode/kreuzungK... | GNU Lesser General Public License | https://www.printables.com/model/94200 | gcodes_0058.tar |
92113 | Mini Loyal Moses by Wekster | <p>I am so incredibly honored to have the iconic and incredibly talented Wekster design an official Mini Loyal Moses (aka Mini LM)!</p><p>Wekster is an amazing part of our wonderful 3D printing community! Please help support him and the wonderful models he creates for us all, and sign up on his Patreon:</p><p><a href="... | [
"wekster",
"moses",
"loyal",
"minilm",
"loyalmoses",
"lmshow",
"miniloyal"
] | Toys & Games > Action Figures & Statues | [
"92113/images/img_4361-3.jpg"
] | [
"92113/gcode/Mini Loyal Moses by Wekster__v0.gcode",
"92113/gcode/Mini Loyal Moses by Wekster__v1.gcode",
"92113/gcode/Mini Loyal Moses by Wekster__v2.gcode",
"92113/gcode/Mini Loyal Moses by Wekster__v3.gcode",
"92113/gcode/Mini Loyal Moses by Wekster__v4.gcode",
"92113/gcode/Mini Loyal Moses by Wekster_... | Creative Commons — Public Domain | https://www.printables.com/model/92113 | gcodes_0058.tar |
90024 | (Easter) Egg - 'chicken' legged display stand | <p>Inspired by a few other similar designs, this little legged display stand can make presenting those special Easter eggs for the holiday even more adorable!</p><p>Done in "two colors" so you can give the legs and feet a more traditional foul coloring!</p><p>You can print them without supports but note that can make t... | [
"stand",
"legs",
"easter",
"egg",
"chicken",
"thingiverse",
"eggstand"
] | Household > Other House Equipment | [
"90024/images/7a214f2379e7561e2495226782a2ac85_display_large_90.jpg",
"90024/images/363f396d64effc6d941e1e2c1fa14fc2_display_large_90.jpg",
"90024/images/ae1bda5ab440ff27a0a24cf922d17415_display_large_90.jpg",
"90024/images/6d68138611f1b6f78b9dfc18335d7e72_display_large_90.jpg"
] | [
"90024/gcode/Egg_Holder__v0.gcode",
"90024/gcode/Egg_Holder__v1.gcode",
"90024/gcode/Egg_Holder__v2.gcode",
"90024/gcode/Egg_Holder__v3.gcode",
"90024/gcode/Egg_Holder__v4.gcode",
"90024/gcode/Egg_Holder__v5.gcode",
"90024/gcode/Egg_Holder__v6.gcode",
"90024/gcode/Egg_Holder__v7.gcode",
"90024/gcode... | Creative Commons — Attribution | https://www.printables.com/model/90024 | gcodes_0058.tar |
89631 | Wardrobe rod holder | <p>My first product, my own design and works great. </p><p>I needed space to hang clothes, and using an old wooden wardrobe rod required imporovization. I hope this will work for a long time</p><ul><li>Time under 40 minutes. </li><li>Layer height 0.2 mm </li><li>Nozzle diameter 0.4 mm </li><li>Infil... | [
"holder",
"wardrobe",
"rod"
] | Household > Other House Equipment | [
"89631/images/1638217691417.jpg",
"89631/images/1638217691388.jpg",
"89631/images/1638217691395.jpg",
"89631/images/1638217691381.jpg",
"89631/images/1638217691374.jpg",
"89631/images/1638217691351.jpg",
"89631/images/1638217691367.jpg",
"89631/images/1638217691400.jpg"
] | [
"89631/gcode/Wardrobe rod holder__v0.gcode",
"89631/gcode/Wardrobe rod holder__v1.gcode",
"89631/gcode/Wardrobe rod holder__v2.gcode",
"89631/gcode/Wardrobe rod holder__v3.gcode",
"89631/gcode/Wardrobe rod holder__v4.gcode",
"89631/gcode/Wardrobe rod holder__v5.gcode",
"89631/gcode/Wardrobe rod holder__... | Creative Commons — Public Domain | https://www.printables.com/model/89631 | gcodes_0058.tar |
87136 | Shimano Bike Break Powl V2 | <p>I made lot of models with 3D printer during last 4 years.<br>Some of them were exposed on my stall at Maker Faire Prague 2021.<br>Now I would like to offer some of them for other 3D printing guys.</p><p>This one is spare part for bikes with the Shimano brakes. There is improved version of my previous model. It shoul... | [
"bike",
"braketool",
"powl"
] | Sports & Outdoor > Outdoor Sports | [
"87136/images/bike-break-powl-v2.jpg"
] | [
"87136/gcode/Bike Break Powl 2__v0.gcode",
"87136/gcode/Bike Break Powl 2__v1.gcode",
"87136/gcode/Bike Break Powl 2__v2.gcode",
"87136/gcode/Bike Break Powl 2__v3.gcode",
"87136/gcode/Bike Break Powl 2__v4.gcode",
"87136/gcode/Bike Break Powl 2__v5.gcode",
"87136/gcode/Bike Break Powl 2__v6.gcode",
"... | GNU General Public License v3.0 | https://www.printables.com/model/87136 | gcodes_0058.tar |
80759 | Honeycomb Vase with thicker sidewalls (stretched 150% in height) |
<p>I thickened the vase to ~4mm & stretched it in Height by 150%</p>
<h3> Print Settings</h3>
<p><strong>Printer:</strong></p>
<p>Yidimu Falcon Pro 10.1"</p>
<p><p class="detail-setting rafts"><strong>Rafts: </strong> <div><p>No</p></div><strong>Supports:</strong></p>
<p>No</p>
<p><p class="detail-setting resoluti... | [
"vase",
"thingiverse"
] | Household > Other House Equipment | [
"80759/images/large_display_screenshot_2021-08-23_174941_80759.jpg",
"80759/images/large_display_fixed_tall_sotvl_thick_2mm_80759.jpg"
] | [
"80759/gcode/Fixed_Tall_sotvl_thick_2mm__v0.gcode",
"80759/gcode/Fixed_Tall_sotvl_thick_2mm__v1.gcode",
"80759/gcode/Fixed_Tall_sotvl_thick_2mm__v2.gcode",
"80759/gcode/Fixed_Tall_sotvl_thick_2mm__v3.gcode",
"80759/gcode/Fixed_Tall_sotvl_thick_2mm__v4.gcode",
"80759/gcode/Fixed_Tall_sotvl_thick_2mm__v5.gc... | Creative Commons — Attribution | https://www.printables.com/model/80759 | gcodes_0058.tar |
73955 | Ribbon Spool Pen Cup | [] | Household > Office | [
"73955/images/img_0220.jpg"
] | [
"73955/gcode/ribbon_pen_cup_1.2mm__v0.gcode",
"73955/gcode/ribbon_pen_cup_1.2mm__v1.gcode",
"73955/gcode/ribbon_pen_cup_1.2mm__v2.gcode",
"73955/gcode/ribbon_pen_cup_1.2mm__v3.gcode",
"73955/gcode/ribbon_pen_cup_1.2mm__v4.gcode",
"73955/gcode/ribbon_pen_cup_1.2mm__v5.gcode",
"73955/gcode/ribbon_pen_cup_... | Creative Commons — Public Domain | https://www.printables.com/model/73955 | gcodes_0058.tar | |
73178 | EIBOS Cyclopes Port Plug | <p>I printed 16 of these to plug all the unused filament and vent ports. The number of openings causes the internal temp to drop to the point where it really wasn't doing much to lower filament humidity.</p> | [
"plug",
"eibos",
"cyclopes"
] | 3D Printers > Accessories | [
"73178/images/screenshot-2021-08-07-002923.jpg"
] | [
"73178/gcode/cyclopse_port_plug__v0.gcode",
"73178/gcode/cyclopse_port_plug__v1.gcode",
"73178/gcode/cyclopse_port_plug__v2.gcode",
"73178/gcode/cyclopse_port_plug__v3.gcode",
"73178/gcode/cyclopse_port_plug__v4.gcode",
"73178/gcode/cyclopse_port_plug__v5.gcode",
"73178/gcode/cyclopse_port_plug__v6.gcod... | Creative Commons — Attribution | https://www.printables.com/model/73178 | gcodes_0058.tar |
66965 | Delta-P fan duct V2-R2 with square nut. | <p>A quick remix of only the duct from teookie's “Delta-P fan duct V2-R2 for MK3S(+) extruder” to include a slot for inserting an M3 square nut to provide for a more secure retention of the screw that goes through the lower right corner of the hotend cooling fan.</p><p>You will require the bracket included with teookie... | [
"fan",
"fanduct",
"duct",
"shroud",
"fanshroud",
"airduct",
"partcooler",
"coolingfan",
"partcooling",
"partfanshroud"
] | 3D Printers > Other Printer Parts & Upgrades | [
"66965/images/right_view.jpg",
"66965/images/left_view.jpg"
] | [
"66965/gcode/v2-r21-for-mk3s-duct_with_nut__v0.gcode",
"66965/gcode/v2-r21-for-mk3s-duct_with_nut__v1.gcode",
"66965/gcode/v2-r21-for-mk3s-duct_with_nut__v2.gcode",
"66965/gcode/v2-r21-for-mk3s-duct_with_nut__v3.gcode",
"66965/gcode/v2-r21-for-mk3s-duct_with_nut__v4.gcode",
"66965/gcode/v2-r21-for-mk3s-du... | GNU General Public License v3.0 | https://www.printables.com/model/66965 | gcodes_0058.tar |
66963 | Raspberry Pi 3B/+ - OctoPrint Prusa Mount (MK3/MK3S) | <p>I remixed this from Malolo and Haz1's ideas for a frame mount for the RasPi right above the Einsy board. There was a Raspi 4 model, but not a 3B, so I snipped and clipped them together :)</p><p>You can mount it using an M3x10 screw from the spares bag, if you still have any. Just make sure you put the M3n nuts in th... | [
"upgrade",
"mount",
"raspberry",
"octoprint",
"raspi"
] | 3D Printers > Prusa Parts & Upgrades | [
"66963/images/img_1376.jpg",
"66963/images/img_1377.jpg"
] | [
"66963/gcode/bottom_mount_3B__v0.gcode",
"66963/gcode/bottom_mount_3B__v1.gcode",
"66963/gcode/bottom_mount_3B__v2.gcode",
"66963/gcode/bottom_mount_3B__v3.gcode",
"66963/gcode/bottom_mount_3B__v4.gcode",
"66963/gcode/bottom_mount_3B__v5.gcode",
"66963/gcode/bottom_mount_3B__v6.gcode",
"66963/gcode/bo... | Creative Commons — Attribution | https://www.printables.com/model/66963 | gcodes_0058.tar |
63986 | pen holder | <p>can be printed in vase mode </p> | [
"decoration",
"penholder",
"flowerpot"
] | Household > Office | [
"63986/images/pen-holder.jpg",
"63986/images/20210417_161159.jpg"
] | [
"63986/gcode/pot_pen__v0.gcode",
"63986/gcode/pot_pen__v1.gcode",
"63986/gcode/pot_pen__v2.gcode",
"63986/gcode/pot_pen__v3.gcode",
"63986/gcode/pot_pen__v4.gcode",
"63986/gcode/pot_pen__v5.gcode",
"63986/gcode/pot_pen__v6.gcode",
"63986/gcode/pot_pen__v7.gcode",
"63986/gcode/pot_pen__v8.gcode",
"... | Creative Commons — Public Domain | https://www.printables.com/model/63986 | gcodes_0058.tar |
62818 | Gameboy Pocket/Color/Light stand | <p>Minimal display stand for the Gameboy Pocket, Gameboy Pocket Light and Gameboy Color.</p>
<p>No supports needed.</p>
<h3> Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Creality</p>
<p><p class="detail-setting printer"><strong>Printer: </strong> <div><p>Ender 3</p></div><strong>Rafts:</strong></p>
<p>... | [
"stand",
"gameboy",
"thingiverse",
"displaystand",
"gameboycolor",
"gameboypocket"
] | Gadgets > Video Games | [
"62818/images/large_display_1_62818.jpg",
"62818/images/large_display_gameboy_pocket_stand_v11_62818.jpg",
"62818/images/large_display_2_62818.jpg"
] | [
"62818/gcode/Gameboy_Pocket_stand_v1.1__v0.gcode",
"62818/gcode/Gameboy_Pocket_stand_v1.1__v1.gcode",
"62818/gcode/Gameboy_Pocket_stand_v1.1__v2.gcode",
"62818/gcode/Gameboy_Pocket_stand_v1.1__v3.gcode",
"62818/gcode/Gameboy_Pocket_stand_v1.1__v4.gcode",
"62818/gcode/Gameboy_Pocket_stand_v1.1__v5.gcode",
... | Creative Commons — Attribution | https://www.printables.com/model/62818 | gcodes_0059.tar |
52281 | Prusa-Box enclosure for mk3s mk2.5s | <p>Prusa box is a kit enclosure for Prusa mk3s mk2s mk2.5 manufactured in France.</p>
<p>kit includes :</p>
<ul>
<li>Brushed stainless steel part</li>
<li>PMMA clear</li>
<li>screws and nut</li>
</ul>
<p>Printed part is available on our website: <a href="https://www.printer-box.com/download/">https://www.printer-box.co... | [
"prusa",
"box",
"filter",
"enclosure",
"mk3s",
"raspberry",
"webcam",
"kit",
"carbon",
"mk25s",
"hepa"
] | 3D Printers > Accessories | [
"52281/images/3d-printer-enclosure-q2.jpg",
"52281/images/3d-printer-box.jpg",
"52281/images/prusa-box_.jpg",
"52281/images/dji_20201213_101427_44.jpg",
"52281/images/dji_20201213_101307_36.jpg",
"52281/images/dji_20201213_101356_41.jpg",
"52281/images/dji_20201213_101051_26.jpg",
"52281/images/dji_20... | [
"52281/gcode/01_main_frame_2020-12-16__v0.gcode",
"52281/gcode/01_main_frame_2020-12-16__v1.gcode",
"52281/gcode/01_main_frame_2020-12-16__v2.gcode",
"52281/gcode/01_main_frame_2020-12-16__v3.gcode",
"52281/gcode/01_main_frame_2020-12-16__v4.gcode",
"52281/gcode/01_main_frame_2020-12-16__v5.gcode",
"522... | Creative Commons — Attribution | https://www.printables.com/model/52281 | gcodes_0059.tar |
50205 | Succulent Plant Pot / Planter "Florence" | <p>***<br><strong>New collection of 8 plant pots</strong> - <a href="https://www.printables.com/model/127174-plant-pot-collection">https://www.prusaprinters.org/prints/127174-plant-pot-collection</a><br>***</p><p>The "Florence" plant pot / planter is 7cm in diameter and 6cm in height.</p><p>The design is a solid shape,... | [
"planter",
"succulents"
] | Household > Home Decor | [
"50205/images/florence01.jpg",
"50205/images/florence02.jpg"
] | [
"50205/gcode/florence__v0.gcode",
"50205/gcode/florence__v1.gcode",
"50205/gcode/florence__v2.gcode",
"50205/gcode/florence__v3.gcode",
"50205/gcode/florence__v4.gcode",
"50205/gcode/florence__v5.gcode",
"50205/gcode/florence__v6.gcode",
"50205/gcode/florence__v7.gcode",
"50205/gcode/florence__v8.gc... | Creative Commons — Attribution | https://www.printables.com/model/50205 | gcodes_0059.tar |
36602 | Shopping cart token | <p>Shopping cart token.<br/>
To use instead of 1 euro coin.<br/>
Minimal design, convenient to use on a key ring.</p>
| [
"token",
"shopping",
"cart"
] | Gadgets > Portable Devices | [
"36602/images/token.jpg"
] | [
"36602/gcode/token_v2__v0.gcode",
"36602/gcode/token_v2__v1.gcode",
"36602/gcode/token_v2__v2.gcode",
"36602/gcode/token_v2__v3.gcode",
"36602/gcode/token_v2__v4.gcode",
"36602/gcode/token_v2__v5.gcode",
"36602/gcode/token_v2__v6.gcode",
"36602/gcode/token_v2__v7.gcode",
"36602/gcode/token_v2__v8.gc... | Creative Commons — Attribution | https://www.printables.com/model/36602 | gcodes_0059.tar |
29510 | Mini Elephant Mobile Phone | <p>Mini Elephant for universal Mobile Phone</p>
| [] | Household > Office | [
"29510/images/elephant.jpg",
"29510/images/elephant-side-view.jpg",
"29510/images/img_20200426_190737.jpg",
"29510/images/img_20200426_190643.jpg"
] | [
"29510/gcode/elephant__v0.gcode",
"29510/gcode/elephant__v1.gcode",
"29510/gcode/elephant__v2.gcode",
"29510/gcode/elephant__v3.gcode",
"29510/gcode/elephant__v4.gcode",
"29510/gcode/elephant__v5.gcode",
"29510/gcode/elephant__v6.gcode",
"29510/gcode/elephant__v7.gcode",
"29510/gcode/elephant__v8.gc... | Creative Commons — Public Domain | https://www.printables.com/model/29510 | gcodes_0059.tar |
27228 | GoPro 8 Battery Cover with USB Hole | <p>This cover allows you to use your GoPro 8 with a USB-C accessory or external battery and not worry about your battery or SD card coming out.</p>
<p>Adding a thin piece of adhesive foam rubber on the inside helps keep the battery tight in the socket.</p>
<h3>Print instructions</h3><p>Printed in PETG with 100% infill ... | [
"gopro",
"battery",
"cover",
"gopro8"
] | Gadgets > Photo & Video | [
"27228/images/img_1353.jpg",
"27228/images/gopro_8_cover_2020-mar-27_01-06-27am-000_customiz.jpg",
"27228/images/gopro_8_cover_2020-mar-27_01-08-06am-000_customiz.jpg"
] | [
"27228/gcode/gopro8cover_v10__v0.gcode",
"27228/gcode/gopro8cover_v10__v1.gcode",
"27228/gcode/gopro8cover_v10__v2.gcode",
"27228/gcode/gopro8cover_v10__v3.gcode",
"27228/gcode/gopro8cover_v10__v4.gcode",
"27228/gcode/gopro8cover_v10__v5.gcode",
"27228/gcode/gopro8cover_v10__v6.gcode",
"27228/gcode/go... | Creative Commons — Public Domain | https://www.printables.com/model/27228 | gcodes_0059.tar |
25366 | Aztec Succulent Temple Planter | <p>Aztec Temple for your succulent? Yes, another succulent planter for your desk or home. This one has the over water drain in the basement that goes under the stairs. If you see water there, you have watered too much. The bottom vents allow the soil to breathe.</p>
<p>The original here was printed using 3D Mars Wood P... | [
"flowerpot",
"flowervase",
"thingiverse",
"deskplanter",
"succulents",
"myanpyramid"
] | Household > Outdoor & Garden | [
"25366/images/2018-02-19_191217_25366.jpg",
"25366/images/2018-02-19_191233_25366.jpg",
"25366/images/2018-02-19_072502_25366.jpg",
"25366/images/955fc18e2c1f9abb0f7ef37577582933_display_large_25.jpg"
] | [
"25366/gcode/aztec_planter__v0.gcode",
"25366/gcode/aztec_planter__v1.gcode",
"25366/gcode/aztec_planter__v2.gcode",
"25366/gcode/aztec_planter__v3.gcode",
"25366/gcode/aztec_planter__v4.gcode",
"25366/gcode/aztec_planter__v5.gcode",
"25366/gcode/aztec_planter__v6.gcode",
"25366/gcode/aztec_planter__v... | Creative Commons — Attribution | https://www.printables.com/model/25366 | gcodes_0059.tar |
22321 | Ender 3 pro engranaje | <p>engranaje simple para ender 3 pro</p>
<h3>Print instructions</h3><p>0,20 layer<br/>
10% infill<br/>
no supports</p> | [] | 3D Printers > Creality Parts & Upgrades | [
"22321/images/ender-3.jpg",
"22321/images/ender-3-render.jpg"
] | [
"22321/gcode/rueda-ender3pro__v0.gcode",
"22321/gcode/rueda-ender3pro__v1.gcode",
"22321/gcode/rueda-ender3pro__v2.gcode",
"22321/gcode/rueda-ender3pro__v3.gcode",
"22321/gcode/rueda-ender3pro__v4.gcode",
"22321/gcode/rueda-ender3pro__v5.gcode",
"22321/gcode/rueda-ender3pro__v6.gcode",
"22321/gcode/ru... | Creative Commons — Public Domain | https://www.printables.com/model/22321 | gcodes_0059.tar |
17577 | SL1 Resin Calibration Object | <p>This is one of the sample objects bundled with the Original Prusa SL1 3D printer designed to test whether your printer works correctly.</p>
<h3>Print instructions</h3><p>Complete guide, how to do <a href="https://help.prusa3d.com/article/z2in03stzn-sl-1-resin-calibration">SL1 resin calibration</a></p>
<figure class... | [
"test",
"sl1",
"sla",
"originalprusasl1",
"testobject"
] | 3D Printers > Test Models | [
"17577/images/resin_calibration_4.jpg",
"17577/images/sl-1-prints.jpg",
"17577/images/resin_calibration_obj.jpg",
"17577/images/screenshot-print-2020-01-13-20-55.jpg"
] | [
"17577/gcode/resin_calibration_object__v0.gcode",
"17577/gcode/resin_calibration_object__v1.gcode",
"17577/gcode/resin_calibration_object__v2.gcode",
"17577/gcode/resin_calibration_object__v3.gcode",
"17577/gcode/resin_calibration_object__v4.gcode",
"17577/gcode/resin_calibration_object__v5.gcode",
"175... | Creative Commons — Public Domain | https://www.printables.com/model/17577 | gcodes_0059.tar |
12882 | Ender 3 double spool holder | <p>Simple spool extension for second spool holder if you have nowhere to place your second spool you are going to print with. Uses original spool holder. Support is only needed for the two notches on top of the part. Be sure to completely remove the supports as it's very tight fit. STEP file included.</p><p><strong>Sup... | [
"spool",
"holder",
"filament",
"creality",
"ender",
"double",
"ender3",
"thingiverse",
"crealityender3"
] | 3D Printers > Creality Parts & Upgrades | [
"12882/images/img_20190623_022445_12882.jpg",
"12882/images/img_20190623_022525_12882.jpg",
"12882/images/img_20190623_022417_12882.jpg"
] | [
"12882/gcode/ender_3_double_spool_holder__v0.gcode",
"12882/gcode/ender_3_double_spool_holder__v1.gcode",
"12882/gcode/ender_3_double_spool_holder__v2.gcode",
"12882/gcode/ender_3_double_spool_holder__v3.gcode",
"12882/gcode/ender_3_double_spool_holder__v4.gcode",
"12882/gcode/ender_3_double_spool_holder_... | Creative Commons — Attribution | https://www.printables.com/model/12882 | gcodes_0059.tar |
11205 | M8 Knob | <p>This is a simple hand knob for use with a standard M8 nut.</p>
<p>Outer diameter is 40mm.</p>
<h3>Print instructions</h3><h3>Category: Parts Print Settings</h3>
<p><strong>Printer Brand:</strong> Prusa</p>
<p><strong>Printer:</strong> <a href="http://amzn.to/2rqZ6Uo">Prusa Mk2</a></p>
<p><strong>Rafts:</strong> No</... | [
"knob",
"thingiverse"
] | 3D Printers > Other Printer Parts & Upgrades | [
"11205/images/m8-knob2_11205.jpg",
"11205/images/840329ca3bf5e8f670916651a6d5067d_display_large_11.jpg",
"11205/images/m8-knob1_11205.jpg"
] | [
"11205/gcode/m8-knob__v0.gcode",
"11205/gcode/m8-knob__v1.gcode",
"11205/gcode/m8-knob__v2.gcode",
"11205/gcode/m8-knob__v3.gcode",
"11205/gcode/m8-knob__v4.gcode",
"11205/gcode/m8-knob__v5.gcode",
"11205/gcode/m8-knob__v6.gcode",
"11205/gcode/m8-knob__v7.gcode",
"11205/gcode/m8-knob__v8.gcode",
"... | Creative Commons — Attribution | https://www.printables.com/model/11205 | gcodes_0059.tar |
8570 | Hair Comb | <p>A simple Hair Comb.<br/>
Should print best with a 0.4mm Nozzle.</p>
<h3>Print instructions</h3><p>Category: Bathroom</p> | [
"comb",
"hair",
"thingiverse",
"haircomb"
] | Household > Bathroom | [
"8570/images/hair_comb_8570.jpg",
"8570/images/c8b61cd81ecce5a25009ce80f770eb44_display_large_85.jpg"
] | [
"8570/gcode/hair_comb__v0.gcode",
"8570/gcode/hair_comb__v1.gcode",
"8570/gcode/hair_comb__v2.gcode",
"8570/gcode/hair_comb__v3.gcode",
"8570/gcode/hair_comb__v4.gcode",
"8570/gcode/hair_comb__v5.gcode",
"8570/gcode/hair_comb__v6.gcode",
"8570/gcode/hair_comb__v7.gcode",
"8570/gcode/hair_comb__v8.gc... | Creative Commons — Attribution | https://www.printables.com/model/8570 | gcodes_0059.tar |
5428 | Bunny Buddha | <p>This is a remix of the Laughing Buddha with our own bunny model we made for easter.<br/>
The details of the model have been sligthly resculpted for enhanced looks.</p>
<h3>Print instructions</h3><p>Best printed in extrudr BioFusion</p> | [
"bunny",
"buddha",
"easterbunny"
] | Art & Design > Sculptures | [
"5428/images/20190902_115856.jpg",
"5428/images/img-20190902-wa0005.jpg",
"5428/images/img-20190902-wa0003.jpg"
] | [
"5428/gcode/bunny_buddha__v0.gcode",
"5428/gcode/bunny_buddha__v1.gcode",
"5428/gcode/bunny_buddha__v2.gcode",
"5428/gcode/bunny_buddha__v3.gcode",
"5428/gcode/bunny_buddha__v4.gcode",
"5428/gcode/bunny_buddha__v5.gcode",
"5428/gcode/bunny_buddha__v6.gcode",
"5428/gcode/bunny_buddha__v7.gcode",
"542... | Creative Commons — Attribution | https://www.printables.com/model/5428 | gcodes_0059.tar |
5297 | Prusa stronger MMU2S Idler | <p>During the assembly of MMU2S I cracked the part. I suddenly discovered that many people are having my problem so I updated the Prusa part to get it stronger.<br/>
This design is based on R1 prusa part.</p>
<h3>Print instructions</h3><p>I have printed it with PETG 0.20 3 perimeters and 30% fill with Honeycomb 3D patt... | [
"mmu2s",
"idler"
] | 3D Printers > Prusa Parts & Upgrades | [
"5297/images/mmu2s-idler-strong.jpg"
] | [
"5297/gcode/mmu2-idler-strong__v0.gcode",
"5297/gcode/mmu2-idler-strong__v1.gcode",
"5297/gcode/mmu2-idler-strong__v2.gcode",
"5297/gcode/mmu2-idler-strong__v3.gcode",
"5297/gcode/mmu2-idler-strong__v4.gcode",
"5297/gcode/mmu2-idler-strong__v5.gcode",
"5297/gcode/mmu2-idler-strong__v6.gcode",
"5297/gc... | Creative Commons — Public Domain | https://www.printables.com/model/5297 | gcodes_0059.tar |
1814 | Prusa MK3 Z axis vibration damper | <p>This is a very simple, super fast to print z-axis vibration damper for the original Prusa MK3.</p>
<p>The Z-top parts for the MK3 are closed at the top. Still the hole for the z-rods on the top parts are much larger than the Z-rods: this is as per design and should allow the rods to wobble a bit. The general accepte... | [
"antivibration",
"damper",
"noise",
"vibration"
] | 3D Printers > Prusa Parts & Upgrades | [
"1814/images/img_20180225_101824.jpg",
"1814/images/img_20180225_101827.jpg"
] | [
"1814/gcode/prusa-z-axis-damper_r1__v0.gcode",
"1814/gcode/prusa-z-axis-damper_r1__v1.gcode",
"1814/gcode/prusa-z-axis-damper_r1__v2.gcode",
"1814/gcode/prusa-z-axis-damper_r1__v3.gcode",
"1814/gcode/prusa-z-axis-damper_r1__v4.gcode",
"1814/gcode/prusa-z-axis-damper_r1__v5.gcode",
"1814/gcode/prusa-z-ax... | Creative Commons — Public Domain | https://www.printables.com/model/1814 | gcodes_0059.tar |
1474622 | Peeing Scrub Daddy Holder | <p>Self draining scrub daddy holder. Printed with 15% infill and supports to baseplate. </p> | [
"kitchen",
"holder",
"gadget",
"sponge",
"scrubber",
"scrubdaddy"
] | Household > Kitchen | [
"1474622/images/20251109_085810.jpg"
] | [
"1474622/gcode/Scrub Daddy Holder__v0.gcode",
"1474622/gcode/Scrub Daddy Holder__v1.gcode",
"1474622/gcode/Scrub Daddy Holder__v2.gcode",
"1474622/gcode/Scrub Daddy Holder__v3.gcode",
"1474622/gcode/Scrub Daddy Holder__v4.gcode",
"1474622/gcode/Scrub Daddy Holder__v5.gcode",
"1474622/gcode/Scrub Daddy H... | Creative Commons — Attribution | https://www.printables.com/model/1474622 | gcodes_0059.tar |
1473345 | Hex-Grip Bed Scraper – Print Removal Tool | <p>🔥 UPDATE: V2 NOW AVAILABLE!</p><p><strong>An improved version (V2) featuring new side-grip grooves for better control is now out!</strong> 👉 <strong>Get the new V2 version here:</strong> </p><div data-printables-embed=""><iframe width="640" height="190" src="https://www.printables.com/embed/1511490?size=wide&s... | [
"3d",
"tool",
"cleanup",
"print",
"handle",
"grip",
"bed",
"honeycomb",
"hex",
"toolbox",
"workshop",
"printing",
"scraper",
"safety",
"accessories",
"3dprinter",
"glass",
"removal",
"ergonomic",
"remove",
"scraping",
"prints"
] | 3D Printers > Accessories | [
"1473345/images/img_20251107_205006.jpg"
] | [
"1473345/gcode/bed scraper__v0.gcode",
"1473345/gcode/bed scraper__v1.gcode",
"1473345/gcode/bed scraper__v2.gcode",
"1473345/gcode/bed scraper__v3.gcode",
"1473345/gcode/bed scraper__v4.gcode",
"1473345/gcode/bed scraper__v5.gcode",
"1473345/gcode/bed scraper__v6.gcode",
"1473345/gcode/bed scraper__v... | Creative Commons — Attribution | https://www.printables.com/model/1473345 | gcodes_0059.tar |
1435375 | BOO! Halloween Wall Sign | <p>This “Boo!” sign is a seasonal decorative plaque featuring a script style “Boo!” with a small bat perched above the letters. The model was created from an SVG silhouette and optimized for FDM 3D printing as a single part.</p><p>Use cases:</p><p>Quick Halloween decorations for doors, windows or shelves</p><p>Photo pr... | [
"decoration",
"wall",
"sign",
"bat",
"decor",
"plaque",
"printable",
"stencil",
"silhouette",
"3dprint",
"boo",
"holiday",
"svg",
"seasonal"
] | Seasonal designs > Autumn & Halloween | [
"1435375/images/4.jpg",
"1435375/images/5.jpg",
"1435375/images/6.jpg",
"1435375/images/7.jpg"
] | [
"1435375/gcode/BOO!__v0.gcode",
"1435375/gcode/BOO!__v1.gcode",
"1435375/gcode/BOO!__v2.gcode",
"1435375/gcode/BOO!__v3.gcode",
"1435375/gcode/BOO!__v4.gcode",
"1435375/gcode/BOO!__v5.gcode",
"1435375/gcode/BOO!__v6.gcode",
"1435375/gcode/BOO!__v7.gcode",
"1435375/gcode/BOO!__v8.gcode",
"1435375/g... | Creative Commons — Attribution | https://www.printables.com/model/1435375 | gcodes_0059.tar |
1237881 | Rubber Duck Cord Bead | <p>Easy to print and perfect for any hoodie!<br>A chic accessory for fashion-conscious people. 😅</p> | [
"beads",
"funny",
"cord",
"duck",
"bead",
"hoodie",
"rubberduck"
] | Fashion > Other Fashion Accessories | [
"1237881/images/20250321_210108.jpg",
"1237881/images/20250321_210127-2.jpg"
] | [
"1237881/gcode/Badeente-Perle__v0.gcode",
"1237881/gcode/Badeente-Perle__v1.gcode",
"1237881/gcode/Badeente-Perle__v2.gcode",
"1237881/gcode/Badeente-Perle__v3.gcode",
"1237881/gcode/Badeente-Perle__v4.gcode",
"1237881/gcode/Badeente-Perle__v5.gcode",
"1237881/gcode/Badeente-Perle__v6.gcode",
"1237881... | Creative Commons — Public Domain | https://www.printables.com/model/1237881 | gcodes_0059.tar |
1228637 | Filament clip | <p><strong>Filament Holder for 3D Printers</strong></p><p>This practical and efficient filament holder is designed for optimal storage and easy handling of filament spools. Thanks to its compact and stable design, it is suitable for various types of spools and ensures your filament stays secure and tangle-free.</p><ul>... | [
"prusa",
"holder",
"grip",
"filament",
"clip",
"filamentclip",
"bambu",
"bambulab"
] | 3D Printers > Accessories | [
"1228637/images/img_20250313_132748x.jpg",
"1228637/images/img_20250313_132813.jpg",
"1228637/images/img_20250313_132748.jpg",
"1228637/images/img_20250313_133241.jpg",
"1228637/images/img_20250313_133202.jpg",
"1228637/images/img_20250313_133211.jpg"
] | [
"1228637/gcode/filament_clip__v0.gcode",
"1228637/gcode/filament_clip__v1.gcode",
"1228637/gcode/filament_clip__v2.gcode",
"1228637/gcode/filament_clip__v3.gcode",
"1228637/gcode/filament_clip__v4.gcode",
"1228637/gcode/filament_clip__v5.gcode",
"1228637/gcode/filament_clip__v6.gcode",
"1228637/gcode/... | Creative Commons — Public Domain | https://www.printables.com/model/1228637 | gcodes_0059.tar |
1146688 | Seated Unicorn | <p>Minimal supports needed, if at all. Looks like candy when printed in glitter filaments. Scalable & Easy!</p><figure class="image image_resized" style="width:78.53%;"><img src="https://media.printables.com/media/prints/1146688/rich_content/714cd64a-9041-43e1-910e-c71cec361470/2025-01-12-204015.jpg#%7B%22uuid%22%3... | [
"sitting",
"mini",
"animal",
"fantasy",
"creature",
"miniature",
"rpg",
"horse",
"horn",
"unicorn",
"seated",
"sleeping",
"unicorns",
"mystical"
] | Art & Design > Sculptures | [
"1146688/images/2025-01-12-203917.jpg",
"1146688/images/2025-01-12-204015.jpg",
"1146688/images/2025-01-12-203932.jpg",
"1146688/images/2025-01-12-203946.jpg"
] | [
"1146688/gcode/seated unicorn stl__v0.gcode",
"1146688/gcode/seated unicorn stl__v1.gcode",
"1146688/gcode/seated unicorn stl__v2.gcode",
"1146688/gcode/seated unicorn stl__v3.gcode",
"1146688/gcode/seated unicorn stl__v4.gcode",
"1146688/gcode/seated unicorn stl__v5.gcode",
"1146688/gcode/seated unicor... | Creative Commons — Public Domain | https://www.printables.com/model/1146688 | gcodes_0059.tar |
1138524 | Zweihaender - Dummy 13 | <p>A simple Zweihaender for the legendary Dummy 13.</p> | [
"sword",
"accessory",
"13",
"dummy",
"greatsword",
"zweihaender"
] | Toys & Games > Action Figures & Statues | [
"1138524/images/dsc4397.jpg",
"1138524/images/dsc4391.jpg",
"1138524/images/dsc4396.jpg",
"1138524/images/img_20241027_134246.jpg"
] | [
"1138524/gcode/Zweihaender_dummy13__v0.gcode",
"1138524/gcode/Zweihaender_dummy13__v1.gcode",
"1138524/gcode/Zweihaender_dummy13__v2.gcode",
"1138524/gcode/Zweihaender_dummy13__v3.gcode",
"1138524/gcode/Zweihaender_dummy13__v4.gcode",
"1138524/gcode/Zweihaender_dummy13__v5.gcode",
"1138524/gcode/Zweihae... | Creative Commons — Attribution | https://www.printables.com/model/1138524 | gcodes_0059.tar |
1111697 | CMF Watch Pro 2 charging stand | <p>Charging stand for CMF Watch Pro 2. Wire is hidden within the model. Print with organic supports.</p> | [
"stand",
"charging",
"smartwatch",
"chargingstand",
"cmf",
"cmfwatchpro2"
] | Gadgets > Portable Devices | [
"1111697/images/cmf_watch_pro2_stand.jpg"
] | [
"1111697/gcode/cmf_watch_2_pro_stand__v0.gcode",
"1111697/gcode/cmf_watch_2_pro_stand__v1.gcode",
"1111697/gcode/cmf_watch_2_pro_stand__v2.gcode",
"1111697/gcode/cmf_watch_2_pro_stand__v3.gcode",
"1111697/gcode/cmf_watch_2_pro_stand__v4.gcode",
"1111697/gcode/cmf_watch_2_pro_stand__v5.gcode",
"1111697/g... | Creative Commons — Attribution | https://www.printables.com/model/1111697 | gcodes_0059.tar |
1103638 | Christmas village church light | <p>A christmas decoration for your winter decorations.</p><p>Use only electric led candle, no real ones!</p><p>Print with 1 perimeter and 0% infill to have the led lights shine through as best as possible. For the building consider printing with a brim on both inside and outside perimeters to help with bed adhesion. No... | [
"light",
"candle",
"led",
"winter",
"building",
"house",
"town",
"tealight"
] | Household > Home Decor | [
"1103638/images/20241210_072420.jpg"
] | [
"1103638/gcode/Church__v0.gcode",
"1103638/gcode/Church__v1.gcode",
"1103638/gcode/Church__v2.gcode",
"1103638/gcode/Church__v3.gcode",
"1103638/gcode/Church__v4.gcode",
"1103638/gcode/Church__v5.gcode",
"1103638/gcode/Church__v6.gcode",
"1103638/gcode/Church__v7.gcode",
"1103638/gcode/Church__v8.gc... | Creative Commons — Attribution | https://www.printables.com/model/1103638 | gcodes_0059.tar |
920174 | Tick removal keyring | <p>A simple small tick removal keyring.</p><p>This came about after a team meeting, 2 of our team had recently had tick bites (we work outdoors in Scotland) I mentioned I'd seen a simple removal keyring & could make. I couldn't find the one I made & used sucessfully a few years ago so I designed my own, printed... | [
"tool",
"hiking",
"handy",
"backpack",
"removal",
"outdoors",
"tick",
"camp",
"caming"
] | Gadgets > Other Gadgets | [
"920174/images/9udno7qmrnmvktfglzuuiq.jpg",
"920174/images/huvclfztqj-17x8tgdc23g.jpg"
] | [
"920174/gcode/tick removal solid__v0.gcode",
"920174/gcode/tick removal solid__v1.gcode",
"920174/gcode/tick removal solid__v2.gcode",
"920174/gcode/tick removal solid__v3.gcode",
"920174/gcode/tick removal solid__v4.gcode",
"920174/gcode/tick removal solid__v5.gcode",
"920174/gcode/tick removal solid__... | Creative Commons — Attribution | https://www.printables.com/model/920174 | gcodes_0059.tar |
885686 | Prusa MK4/MK3.9 Love Board Cover With Ventilation Grill/LED Visualiser | <p>If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free.</p><p><a href="https://paypal.me/muddymaker">https://paypal.me/muddymaker</a></p><p> </p><p>Prusa MK4/MK3.9 love board cover with ventilation grill/LED visualiser.... | [
"prusa",
"mk4",
"mk39"
] | 3D Printers > Prusa Parts & Upgrades | [
"885686/images/img_7209.jpg",
"885686/images/img_7209-copy.jpg",
"885686/images/img_7215.jpg",
"885686/images/img_7219.jpg"
] | [
"885686/gcode/Nextruder Love Board Cover Ventilation Grill LED Visualiser__v0.gcode",
"885686/gcode/Nextruder Love Board Cover Ventilation Grill LED Visualiser__v1.gcode",
"885686/gcode/Nextruder Love Board Cover Ventilation Grill LED Visualiser__v2.gcode",
"885686/gcode/Nextruder Love Board Cover Ventilation... | GNU General Public License v2.0 | https://www.printables.com/model/885686 | gcodes_0059.tar |
885121 | Template Ruler with Electrical Diagrams | <p>Handy ruler with extras 📏⚡<br>• Holes for measuring wire & component diameters 🧰<br>• Connector size templates 🔌<br>• Basic electrical symbols ⚙<br>• Centimeter scale for precise measurements 📐</p><p>Perfect tool for makers and electricians! 🛠✨</p> | [
"electronics",
"electric",
"template",
"electrical",
"templates",
"ruller",
"rullers"
] | Hobby & Makers > Electronics | [
"885121/images/printables-13.jpg",
"885121/images/img_20240520_215803.jpg",
"885121/images/snimek-obrazovky-2024-05-19-201304.jpg",
"885121/images/img_20240519_201236-1.jpg"
] | [
"885121/gcode/RULLER__v0.gcode",
"885121/gcode/RULLER__v1.gcode",
"885121/gcode/RULLER__v2.gcode",
"885121/gcode/RULLER__v3.gcode",
"885121/gcode/RULLER__v4.gcode",
"885121/gcode/RULLER__v5.gcode",
"885121/gcode/RULLER__v6.gcode",
"885121/gcode/RULLER__v7.gcode",
"885121/gcode/RULLER__v8.gcode",
"... | Creative Commons — Attribution | https://www.printables.com/model/885121 | gcodes_0059.tar |
883857 | Dummy 13 "trigger discipline" hands | <p><strong>*UPDATED 12/27/2024: The “Fix Model” warning has been resolved.</strong></p><p>Safety first!</p><p>Rule #3: Keep your finger straight and off the trigger until you are ready to fire.</p><p>I scaled mine to 122% to fit my G.I. Joe Classified and Action Force gear.</p><p>*Note: Bambu Studio gives me the “Fix M... | [
"dummy13",
"dummy13mods"
] | Toys & Games > Action Figures & Statues | [
"883857/images/d13_td.jpg"
] | [
"883857/gcode/D13_trigger_discipline_hands_fixed__v0.gcode",
"883857/gcode/D13_trigger_discipline_hands_fixed__v1.gcode",
"883857/gcode/D13_trigger_discipline_hands_fixed__v2.gcode",
"883857/gcode/D13_trigger_discipline_hands_fixed__v3.gcode",
"883857/gcode/D13_trigger_discipline_hands_fixed__v4.gcode",
"... | Creative Commons — Attribution | https://www.printables.com/model/883857 | gcodes_0059.tar |
878932 | electric cabinet key (triangle) | <p>electric cabinet key (triangle)</p> | [
"box",
"triangle",
"electric",
"keychain",
"key",
"cabinet",
"caja",
"triangular",
"electrical",
"keychains",
"llave",
"electricidad",
"triangulo",
"electrico",
"gabinete"
] | Gadgets > Other Gadgets | [
"878932/images/electric_cabinet_key_sample.jpg"
] | [
"878932/gcode/Electric_Cabinet_Key__v0.gcode",
"878932/gcode/Electric_Cabinet_Key__v1.gcode",
"878932/gcode/Electric_Cabinet_Key__v2.gcode",
"878932/gcode/Electric_Cabinet_Key__v3.gcode",
"878932/gcode/Electric_Cabinet_Key__v4.gcode",
"878932/gcode/Electric_Cabinet_Key__v5.gcode",
"878932/gcode/Electric... | Creative Commons — Attribution | https://www.printables.com/model/878932 | gcodes_0059.tar |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.