model_id stringlengths 1 7 | name stringlengths 1 169 | description stringlengths 0 38.2k | tags listlengths 0 284 | printables_category stringclasses 76
values | image_paths listlengths 0 62 | gcode_paths listlengths 1 10 | license stringclasses 8
values | source stringlengths 34 40 | shard_file stringclasses 563
values |
|---|---|---|---|---|---|---|---|---|---|
231551 | Linux Coaster | <p>When Windows gives up, the penguin will save you! :)</p> | [
"coaster",
"drinkcoaster",
"beveragecoaster",
"tablecoaster",
"linux",
"beercoaster"
] | Art & Design > 2D Plates & Logos | [
"231551/images/linux-pinguin.jpg"
] | [
"231551/gcode/Linux Coaster__v0.gcode",
"231551/gcode/Linux Coaster__v1.gcode",
"231551/gcode/Linux Coaster__v2.gcode",
"231551/gcode/Linux Coaster__v4.gcode"
] | GNU General Public License v3.0 | https://www.printables.com/model/231551 | gcodes_0505.tar |
231460 | Schutzkappe für "YubiKey 5C NFC" / Protection Cap For 'YubiKey 5C NFC' | <p>Mit dem YubiKey am Schlüsselbund ist der USB C Stecker ziemlich ungeschützt, deshalb musste eine Kappe her. Die Kappe ist an der Innenseite mit einer runden Erhöhung ausgestattet, die in die Aussparung des YubiKey greift, um die Schutzkappe zu sichern.</p><p>As I carry the YubiKey on my keychain with my bunch of key... | [
"cap",
"keycap",
"protection",
"yubikey"
] | Gadgets > Computers | [
"231460/images/20220625_093630.jpg",
"231460/images/20220625_093648.jpg"
] | [
"231460/gcode/YubiKeyProtector__v0.gcode",
"231460/gcode/YubiKeyProtector__v1.gcode",
"231460/gcode/YubiKeyProtector__v2.gcode",
"231460/gcode/YubiKeyProtector__v3.gcode",
"231460/gcode/YubiKeyProtector__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/231460 | gcodes_0505.tar |
231444 | LCR meter housing (ARCELI LCR-T4) | <p>A simple case for a cheap LCR-meter from amazon. </p><p>Look for “ARCELI LCR-T4 ESR Meter” to see the type, there are also different ones with different mounting holes.</p><p>You can use M3x5mm bolts to fix the board, just directly screw them into the holes (needs a little force to cut the threads into the prin... | [
"lcrt4"
] | Hobby & Makers > Electronics | [
"231444/images/img_2145.jpg"
] | [
"231444/gcode/lcr-house__v0.gcode",
"231444/gcode/lcr-house__v1.gcode",
"231444/gcode/lcr-house__v2.gcode",
"231444/gcode/lcr-house__v3.gcode",
"231444/gcode/lcr-house__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/231444 | gcodes_0505.tar |
231428 | Millennium Falcon Coaster | <p>Printed at 0.15 layer height with color change<br><br>2.75 (White/Marble)<br>3.20 (Black)</p> | [
"coaster"
] | Art & Design > 2D Plates & Logos | [
"231428/images/millenium_falcon_coaster.jpg",
"231428/images/millenium_falcon_coaster.jpg"
] | [
"231428/gcode/millienum_falcon_coaster__v0.gcode",
"231428/gcode/millienum_falcon_coaster__v1.gcode",
"231428/gcode/millienum_falcon_coaster__v2.gcode",
"231428/gcode/millienum_falcon_coaster__v3.gcode",
"231428/gcode/millienum_falcon_coaster__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/231428 | gcodes_0505.tar |
231108 | CUP HOLDER WITH LIQUID RESERVOIR | [
"beveragecoaster"
] | Household > Other House Equipment | [
"231108/images/cup-holder-with-liquid-reservoir.jpg",
"231108/images/cup-holder-with-liquid-reservoir.jpg"
] | [
"231108/gcode/PC102__v0.gcode",
"231108/gcode/PC102__v1.gcode",
"231108/gcode/PC102__v2.gcode",
"231108/gcode/PC102__v3.gcode",
"231108/gcode/PC102__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/231108 | gcodes_0505.tar | |
231013 | Window stop | <p>PLA 8% Cubic. </p><p>Different windows may require different sizes.</p><p>Measure first, adjust the file if needed then print as many times as you like.</p><p> </p> | [
"windowstopper"
] | Household > Other House Equipment | [
"231013/images/491ba4d7-99a0-473b-aaa8-2706085a2a9d.jpg"
] | [
"231013/gcode/WindowStop__v0.gcode",
"231013/gcode/WindowStop__v1.gcode",
"231013/gcode/WindowStop__v2.gcode",
"231013/gcode/WindowStop__v3.gcode",
"231013/gcode/WindowStop__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/231013 | gcodes_0505.tar |
230982 | Cat/dog carrier box door clip replacement | <p>Cat/dog carrier box door clip replacement. <br>I lost 1 , and had to get a replacement.</p><p>First tried doing it in Sketchup which proved very hard, then created it in OpenSCAD (using the BOSL library to make is easier - https://github.com/revarbat/BOSL).<br>The attached openscad file also has a slider to sho... | [] | Household > Pets | [
"230982/images/img_9933-large.jpg",
"230982/images/catboxclipexploded.jpg",
"230982/images/camphoto_1932422408.jpg"
] | [
"230982/gcode/Cat carrier latch part__v0.gcode",
"230982/gcode/Cat carrier latch part__v1.gcode",
"230982/gcode/Cat carrier latch part__v2.gcode",
"230982/gcode/Cat carrier latch part__v3.gcode",
"230982/gcode/Cat carrier latch part__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/230982 | gcodes_0505.tar |
230976 | Cable hold | <p>As I need my cable for charging two headphones and a gamepad, I had to somehow secure cable closer to items, so I made this holder. It is used on 4mm diameter, braided cable and it is hold very securely (smaller diameters can have movement). You can print it within a few minutes and use anywhere you want (it has hol... | [
"holder",
"cableholder"
] | Hobby & Makers > Electronics | [
"230976/images/20220624_092454583_ios.jpg",
"230976/images/20220624_092503741_ios.jpg"
] | [
"230976/gcode/Cable holder__v0.gcode",
"230976/gcode/Cable holder__v1.gcode",
"230976/gcode/Cable holder__v2.gcode",
"230976/gcode/Cable holder__v3.gcode",
"230976/gcode/Cable holder__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/230976 | gcodes_0505.tar |
230967 | Filament Holder for frame Prusa MK3S | <p>I've made this model to keep my filament ready near by and dont have to find its end any time. </p> | [
"spool",
"holder",
"filament",
"75",
"1"
] | 3D Printers > Accessories | [
"230967/images/zdjecie-24062022-10-58-54.jpg",
"230967/images/zdjecie-24062022-10-59-11.jpg",
"230967/images/zdjecie-24062022-10-58-41.jpg"
] | [
"230967/gcode/Filament Holder v3__v0.gcode",
"230967/gcode/Filament Holder v3__v1.gcode",
"230967/gcode/Filament Holder v3__v2.gcode",
"230967/gcode/Filament Holder v3__v3.gcode",
"230967/gcode/Filament Holder v3__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/230967 | gcodes_0505.tar |
230806 | Hex Coaster | <p>I printed this with a 0.15 layer<br><br>Open the 3mf file… I created a modification object to remove the top layer from<br>the inside of the coaster.<br><br>I set the infill the 10% and Honeycomb<br><br>Change the layers at<br><br>2.30 (Orange)<br>3.20 (Black)</p> | [
"coaster"
] | Art & Design > 2D Plates & Logos | [
"230806/images/hex_coaster.jpg"
] | [
"230806/gcode/hex_coaster__v0.gcode",
"230806/gcode/hex_coaster__v1.gcode",
"230806/gcode/hex_coaster__v2.gcode",
"230806/gcode/hex_coaster__v3.gcode",
"230806/gcode/hex_coaster__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/230806 | gcodes_0505.tar |
230704 | New Year Tree Hanger |
<p>My version of such a useful thing</p>
Category: Toy & Game Accessories
| [
"hook",
"hanger",
"thingiverse",
"cristmastree",
"cristmasdecoration"
] | Toys & Games > Outdoor Toys | [
"230704/images/large_display_newyeartreehook_230704.jpg"
] | [
"230704/gcode/NewYearTreeHook__v0.gcode",
"230704/gcode/NewYearTreeHook__v1.gcode",
"230704/gcode/NewYearTreeHook__v2.gcode",
"230704/gcode/NewYearTreeHook__v3.gcode",
"230704/gcode/NewYearTreeHook__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/230704 | gcodes_0505.tar |
230673 | paper holder | <p>before using cut the supports on two of the triangles</p><p> </p> | [
"paper"
] | Art & Design > Wall-mounted | [
"230673/images/20220623_195959.jpg"
] | [
"230673/gcode/Papír holder (3)__v0.gcode",
"230673/gcode/Papír holder (3)__v1.gcode",
"230673/gcode/Papír holder (3)__v2.gcode",
"230673/gcode/Papír holder (3)__v3.gcode",
"230673/gcode/Papír holder (3)__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/230673 | gcodes_0505.tar |
230406 | XT60 Cap | <p>A simple XT60 cover.</p><ul><li>Prints fast with the help of vase mode</li><li>Fits snuggly</li><li>Has a bottom edge for easy removal</li><li>Mostly waterproof (not guaranteed)</li><li>Gcode for Prusa MK3S+ 0.4mm nozzle (bigger nozzle will require modification of the model)</li></ul><p>If you want to use anot... | [
"battery",
"cover",
"electronics",
"vasemode",
"connector",
"fastprint"
] | Hobby & Makers > RC & Robotics | [
"230406/images/capture.jpg",
"230406/images/capture.jpg",
"230406/images/pxl_20220623_010315268.jpg",
"230406/images/pxl_20220623_010209420.jpg"
] | [
"230406/gcode/XT60-cover__v1.gcode",
"230406/gcode/XT60-cover__v2.gcode",
"230406/gcode/XT60-cover__v3.gcode",
"230406/gcode/XT60-cover__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/230406 | gcodes_0505.tar |
230292 | Labyrinth coaster | <p>If you get a ball home after consuming 8-10 beers, it is likely that you will go home from the pub yourself.</p> | [
"toy",
"coasters",
"coaster",
"labyrinth",
"drinkcoaster",
"meditation",
"think",
"bludiste",
"3dmaze",
"hlavolam"
] | Household > Kitchen | [
"230292/images/dscn1550.jpg",
"230292/images/snimka-obrazovky-137.jpg"
] | [
"230292/gcode/labirynt__v0.gcode",
"230292/gcode/labirynt__v1.gcode",
"230292/gcode/labirynt__v2.gcode",
"230292/gcode/labirynt__v3.gcode",
"230292/gcode/labirynt__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/230292 | gcodes_0505.tar |
230286 | LCD Cover for Ender-3/CR-10 | <p>The solution to eliminate the light from the Ender-3 or CR-10's bright LCD screen. The cover attaches magnetically using four 5x3mm neodymium magnets. The cover also has the added benefit of keeping dust and debris away from your screen when not in use.</p> | [
"display",
"light",
"magnet",
"magnets",
"creality",
"ender",
"cover",
"magnetic",
"screen",
"lcd",
"ender3",
"crealitycr10",
"lcdcover",
"crealityender3",
"ender5",
"nightlight",
"lcdscreen",
"crealityender5",
"lcddisplay",
"ender3pro",
"crealitycr10s",
"ender5plus",
"di... | 3D Printers > Accessories | [
"230286/images/large_display_img_0971.jpg",
"230286/images/large_display_66503418904__4561ffa5-9caa-4554-8fb.jpg"
] | [
"230286/gcode/Ender_Display_Cover__v0.gcode",
"230286/gcode/Ender_Display_Cover__v1.gcode",
"230286/gcode/Ender_Display_Cover__v2.gcode",
"230286/gcode/Ender_Display_Cover__v3.gcode",
"230286/gcode/Ender_Display_Cover__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/230286 | gcodes_0505.tar |
230237 | Box Pudełko zew130x40x48 | <p>Pudełeczko na różności.</p> | [
"box",
"pudelko"
] | Hobby & Makers > Other Ideas | [
"230237/images/20220621_233553.jpg"
] | [
"230237/gcode/Box 130x40__v0.gcode",
"230237/gcode/Box 130x40__v1.gcode",
"230237/gcode/Box 130x40__v2.gcode",
"230237/gcode/Box 130x40__v3.gcode",
"230237/gcode/Box 130x40__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/230237 | gcodes_0505.tar |
230084 | Photo screw nut | <p>This is a small print done for a friend which needed it.</p><p>I did it in TPU for having a small tolerence, and so a strong bond with everything.</p> | [] | Gadgets > Photo & Video | [
"230084/images/img_20220622_132321.jpg"
] | [
"230084/gcode/Nut__v0.gcode",
"230084/gcode/Nut__v1.gcode",
"230084/gcode/Nut__v2.gcode",
"230084/gcode/Nut__v3.gcode",
"230084/gcode/Nut__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/230084 | gcodes_0505.tar |
229875 | Cupholder for NordicTrak Commercial X32i, X22i, X15, X11 and more | <p>Generic PLA. 0.20 speed. Supports under arches and overhang.</p> | [
"cupholder",
"nordictrack"
] | Sports & Outdoor > Indoor Sports | [
"229875/images/img_6965.jpg",
"229875/images/img_6962.jpg",
"229875/images/img_6963.jpg"
] | [
"229875/gcode/Treadmill Cup Holder__v0.gcode",
"229875/gcode/Treadmill Cup Holder__v1.gcode",
"229875/gcode/Treadmill Cup Holder__v2.gcode",
"229875/gcode/Treadmill Cup Holder__v3.gcode",
"229875/gcode/Treadmill Cup Holder__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/229875 | gcodes_0505.tar |
229824 | Kenobi Can Holder | <p>Been seeing some fun can holders around so figured I'd try my hand at making one. Might need to mess with the tolerances, since I haven't test printed this yet.</p>
Category: Food & Drink | [
"thingiverse"
] | Household > Kitchen | [
"229824/images/large_display_screenshot_2022-06-21_175123_229824.jpg",
"229824/images/large_display_screenshot_2022-06-21_174911_229824.jpg",
"229824/images/large_display_obi_can_229824.jpg"
] | [
"229824/gcode/obi_can__v0.gcode",
"229824/gcode/obi_can__v1.gcode",
"229824/gcode/obi_can__v2.gcode",
"229824/gcode/obi_can__v3.gcode",
"229824/gcode/obi_can__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/229824 | gcodes_0505.tar |
229651 | Krytka plasového okna Plastic window cover | <p>Zase jedna rychlovka s chybami, ale funkční.</p> | [
"cover"
] | Household > Other House Equipment | [
"229651/images/vystrizek.jpg",
"229651/images/vystrizek2.jpg",
"229651/images/vystrizek3.jpg"
] | [
"229651/gcode/Krytka_plastoveho_okna__v0.gcode",
"229651/gcode/Krytka_plastoveho_okna__v1.gcode",
"229651/gcode/Krytka_plastoveho_okna__v2.gcode",
"229651/gcode/Krytka_plastoveho_okna__v3.gcode",
"229651/gcode/Krytka_plastoveho_okna__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/229651 | gcodes_0505.tar |
229643 | Velux (roof) window limiter | <p>A simple push-in-the-hole window limiter for Velux GGU / GGL roof windows.</p><p>The velux roof window has a stock limited window opening which was too large for my use.</p><p>This limiter lets you open the window more than the ventilation setting but less than the stock limited opening.</p><p>It was printed with a ... | [
"window",
"thingiverse",
"windowlatch",
"limiter",
"velux",
"roofwindow"
] | Household > Other House Equipment | [
"229643/images/large_display_20211130_173556_229643.jpg",
"229643/images/large_display_20211130_173536_229643.jpg",
"229643/images/large_display_20211130_173547_229643.jpg",
"229643/images/large_display_velux_window_limiter_229643.jpg",
"229643/images/large_display_20211130_173742_229643.jpg",
"229643/ima... | [
"229643/gcode/Velux_window_limiter__v0.gcode",
"229643/gcode/Velux_window_limiter__v1.gcode",
"229643/gcode/Velux_window_limiter__v2.gcode",
"229643/gcode/Velux_window_limiter__v3.gcode",
"229643/gcode/Velux_window_limiter__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/229643 | gcodes_0505.tar |
229635 | Moneta per carrello della spesa | <p>Nessun particolare accorgimento, infill 100% </p><p>Testata sui carrelli per la spesa della casa impressa sulla moneta e funziona bene!</p><p>Quella in foto e' la vecchia versione, successivamente modificata, non cambia molto se non che la nuova, come si vede nel modello 3D ha un po' di bordino esterno..</p> | [
"money",
"supermarket",
"carrellospesa",
"moneta"
] | Household > Kitchen | [
"229635/images/img_20220621_185125.jpg",
"229635/images/img_20220621_185140.jpg"
] | [
"229635/gcode/Moneta Carrello__v0.gcode",
"229635/gcode/Moneta Carrello__v1.gcode",
"229635/gcode/Moneta Carrello__v2.gcode",
"229635/gcode/Moneta Carrello__v3.gcode",
"229635/gcode/Moneta Carrello__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/229635 | gcodes_0505.tar |
229519 | Cable Cover for CR-10 V3 | <p>Simple cover to hide al those ugly cables on your CR-10 V3 :)</p><p>Print at 0.2 layer height with 4 layer floor (0.8mm thick</p> | [
"cover",
"cablemanagement",
"casing"
] | 3D Printers > Accessories | [
"229519/images/cover-large.jpg",
"229519/images/cover2.jpg",
"229519/images/cover3.jpg",
"229519/images/tinker.jpg"
] | [
"229519/gcode/CR-10 V3 Cable Cover__v0.gcode",
"229519/gcode/CR-10 V3 Cable Cover__v1.gcode",
"229519/gcode/CR-10 V3 Cable Cover__v2.gcode",
"229519/gcode/CR-10 V3 Cable Cover__v3.gcode",
"229519/gcode/CR-10 V3 Cable Cover__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/229519 | gcodes_0505.tar |
229491 | Crown Cookie Cutter (71 x 53mm) |
<p>Crown Cookie Cutter 71mm x 53mm</p>
<h3>Print Settings</h3>
<p><strong>Printer:</strong></p>
<p>Anet A8</p>
<p class="detail-setting rafts"><strong>Rafts: </strong>
<div><p>Doesn't Matter</p></div>
<p><strong>Supports:</strong></p>
<p>No</p>
<p class="detail-setting resolution"><strong>Resolution: </strong>
<div>... | [
"cookie",
"cookies",
"crowns",
"crown",
"cookiecutter",
"princess",
"thingiverse",
"3dcookiecutters",
"cookiestamp",
"cookiecutters",
"princesscrown"
] | Household > Kitchen | [
"229491/images/49fc294190d62f8ce4a7e5f5ae31cc26_display_large_22.jpg",
"229491/images/99c8cbde681d4ff137c2f371c060e0be_display_large_22.jpg",
"229491/images/cb6c0087f7d6446d36c2ee24129e1dbd_display_large_22.jpg",
"229491/images/82ed1458607ae0e0c972bece89bd3cf5_display_large_22.jpg"
] | [
"229491/gcode/Crown__v0.gcode",
"229491/gcode/Crown__v1.gcode",
"229491/gcode/Crown__v2.gcode",
"229491/gcode/Crown__v3.gcode",
"229491/gcode/Crown__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/229491 | gcodes_0505.tar |
229414 | Support Lezyne 1300XXL Garmin Gopro | [
"garmin",
"gopromount",
"lezyne"
] | Sports & Outdoor > Outdoor Sports | [
"229414/images/6daa6f75-ac74-4d19-8c03-230da78667ec.jpg",
"229414/images/2993633.jpg",
"229414/images/3a152cf3-066c-4a81-b342-aa73a0e6010e.jpg"
] | [
"229414/gcode/Lezyne_Garmin_Gopro__v0.gcode",
"229414/gcode/Lezyne_Garmin_Gopro__v1.gcode",
"229414/gcode/Lezyne_Garmin_Gopro__v2.gcode",
"229414/gcode/Lezyne_Garmin_Gopro__v3.gcode",
"229414/gcode/Lezyne_Garmin_Gopro__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/229414 | gcodes_0505.tar | |
229404 | Kitchenaid Stand Mixer Repair | <figure class="media"><oembed url="https://youtu.be/JCOQEtNHIB0"></oembed></figure><p>I had to repair our Kitchenaid mixer during lockdown with no access to a parts supplier. This little gear did the trick. The OEM part is nylon and designed to fail if overstressed, thereby saving the rest of the gear train... | [] | Household > Kitchen | [
"229404/images/kitchenaid-mixer-gear.jpg"
] | [
"229404/gcode/Kitchenaid Mixer Gear__v0.gcode",
"229404/gcode/Kitchenaid Mixer Gear__v1.gcode",
"229404/gcode/Kitchenaid Mixer Gear__v2.gcode",
"229404/gcode/Kitchenaid Mixer Gear__v3.gcode",
"229404/gcode/Kitchenaid Mixer Gear__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/229404 | gcodes_0505.tar |
229396 | Bed Mount for Articulating Raspberry Pi Camera for Prusa MK3 (45 degree for Lack) | <p>This remix features a 45 degree bend to accommodate the Lack enclosure, and a small extension to clear the z-axis rods.</p> | [
"prusa",
"camera",
"mk3",
"mount",
"bed",
"raspberry",
"pi",
"articulating"
] | 3D Printers > Accessories | [
"229396/images/pxl_20220621_035843777.jpg",
"229396/images/pxl_20220621_035900407.jpg"
] | [
"229396/gcode/45_degree_mount__v0.gcode",
"229396/gcode/45_degree_mount__v1.gcode",
"229396/gcode/45_degree_mount__v2.gcode",
"229396/gcode/45_degree_mount__v3.gcode",
"229396/gcode/45_degree_mount__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/229396 | gcodes_0505.tar |
229362 | Dual Remote Holder | <p>I custom-designed this remote holder to fit the Sony TV Remote and FireTV Remote control holder. However, this will fit the majority of the TV/AC/Light remotes. There are many remote holders. However, none of them is a screw mount.</p><h3><strong>Print Settings</strong></h3><p><strong>Printer Brand:</strong></p><p>C... | [
"remote",
"remoteholder",
"dualremoteholder"
] | Hobby & Makers > Electronics | [
"229362/images/dual-remote.jpg",
"229362/images/top-view-dual-remote.jpg"
] | [
"229362/gcode/Dual Remote Holder__v0.gcode",
"229362/gcode/Dual Remote Holder__v1.gcode",
"229362/gcode/Dual Remote Holder__v2.gcode",
"229362/gcode/Dual Remote Holder__v3.gcode",
"229362/gcode/Dual Remote Holder__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/229362 | gcodes_0505.tar |
229262 | Switch Box for Round 12v Switch | <p>I needed a small box to mount a switch, and run the wires out for LED lights. Here is what I created.</p> | [
"box",
"led",
"switch",
"mount",
"lighting",
"12v"
] | Hobby & Makers > Electronics | [
"229262/images/switchbox.jpg"
] | [
"229262/gcode/12v Switch Box__v0.gcode",
"229262/gcode/12v Switch Box__v1.gcode",
"229262/gcode/12v Switch Box__v2.gcode",
"229262/gcode/12v Switch Box__v3.gcode",
"229262/gcode/12v Switch Box__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/229262 | gcodes_0505.tar |
229260 | Derpy Tanjiro Croc Charm |
<p>This is a Crocs Charm of Gonpachiro Kamapoko. The one I printed I painted black on the top and sides</p>
<h3>Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Creality</p>
<p class="detail-setting printer"><strong>Printer: </strong>
<div><p>Ender 3</p></div>
<p><strong>Rafts:</strong></p>
<p>No</p>
<p... | [
"pin",
"anime",
"thingiverse",
"charm",
"crocs",
"demonslayer",
"tanjiro",
"tanjirokamado",
"crocscharm",
"derp",
"shonen"
] | Fashion > Other Fashion Accessories | [
"229260/images/large_display_screenshot_2022-06-11_223213_229260.jpg",
"229260/images/large_display_screenshot_2022-06-11_223128_229260.jpg",
"229260/images/large_display_tanjiro_229260.jpg"
] | [
"229260/gcode/Tanjiro__v0.gcode",
"229260/gcode/Tanjiro__v1.gcode",
"229260/gcode/Tanjiro__v2.gcode",
"229260/gcode/Tanjiro__v3.gcode",
"229260/gcode/Tanjiro__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/229260 | gcodes_0505.tar |
229190 | Luffy (Post Timeskip) - One Piece | <p>I took a game model and posed it in blender. Supports are a pain, and the hat is really thin. BE CAREFUL. I think I used 30 or 40 percent infill. Enough to be solid on thin parts but not ridiculous. There are some modeling errors, but Cura lets me print anyways. I used PLA. The circle that he stands on with the joll... | [
"figurine",
"anime",
"stl",
"onepiece",
"blender",
"anycubici3mega",
"highquality",
"luffy"
] | Toys & Games > Action Figures & Statues | [
"229190/images/20220416_093121.jpg"
] | [
"229190/gcode/Luffyv3__v1.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/229190 | gcodes_0505.tar |
229055 | The TPU stringing test I use | <p>It's very basic but if anyone wants it you're more than welcome. Just duplicate, flip over and you have the test as per my videos. </p> | [
"test",
"calibration",
"tower",
"tpu"
] | 3D Printers > Test Models | [
"229055/images/capture.jpg"
] | [
"229055/gcode/proper stringing test_1__v0.gcode",
"229055/gcode/proper stringing test_1__v1.gcode",
"229055/gcode/proper stringing test_1__v2.gcode",
"229055/gcode/proper stringing test_1__v3.gcode",
"229055/gcode/proper stringing test_1__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/229055 | gcodes_0505.tar |
229018 | Cookie Cutter Heart | [
"cookie",
"cutter",
"heard"
] | Household > Kitchen | [
"229018/images/bild1.jpg"
] | [
"229018/gcode/cookie cutter heard__v0.gcode",
"229018/gcode/cookie cutter heard__v1.gcode",
"229018/gcode/cookie cutter heard__v2.gcode",
"229018/gcode/cookie cutter heard__v3.gcode",
"229018/gcode/cookie cutter heard__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/229018 | gcodes_0505.tar | |
228974 | Even simpler filament swatch (remix) | <p>Filament swatch card, remixed into a slightly smaller version.</p><p>Suggested 0.2mm layer height, high infill, and enough solid layer to have a valid thickness/transparency test.</p><p>Dimensions: 69mm x 33mm x 2mm (significantly reduced size from the original, while keeping its elegance (I think))</p> | [
"filamentswatch"
] | 3D Printers > Accessories | [
"228974/images/pxl_20220620_091547260.jpg"
] | [
"228974/gcode/Swatch Card__v0.gcode",
"228974/gcode/Swatch Card__v1.gcode",
"228974/gcode/Swatch Card__v2.gcode",
"228974/gcode/Swatch Card__v3.gcode",
"228974/gcode/Swatch Card__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/228974 | gcodes_0505.tar |
228934 | Shovel Pick remix | <p>A handy little scoop/poker/scraper for your 420 needs. I can not find the original file that I remixed but I made it shorter and thicker for strength. </p> | [
"herb",
"420",
"scoop",
"weed"
] | Healthcare > Home Medical Tools | [
"228934/images/shovel-pick-2.jpg",
"228934/images/shovel-pick.jpg"
] | [
"228934/gcode/shovelpick__v0.gcode",
"228934/gcode/shovelpick__v1.gcode",
"228934/gcode/shovelpick__v2.gcode",
"228934/gcode/shovelpick__v3.gcode",
"228934/gcode/shovelpick__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/228934 | gcodes_0505.tar |
228908 | Hygrometer sensor faceplate |
<p>This plate is designed for a popular type of sensor used in filament airtight boxes (shoutout to thing:1332650 !). There are many clones; this is the one I happened to have when designing this:
https://www.amazon.com/gp/product/B07GR67G1M/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1</p>
<p>The plate is m... | [
"thingiverse"
] | 3D Printers > Accessories | [
"228908/images/large_display_img_20200111_200857_228908.jpg",
"228908/images/large_display_img_20200111_200336_228908.jpg",
"228908/images/large_display_img_20200111_200311_228908.jpg",
"228908/images/large_display_img_20200111_200300_228908.jpg"
] | [
"228908/gcode/moisure_sensor_face_plate__v0.gcode",
"228908/gcode/moisure_sensor_face_plate__v1.gcode",
"228908/gcode/moisure_sensor_face_plate__v2.gcode",
"228908/gcode/moisure_sensor_face_plate__v3.gcode",
"228908/gcode/moisure_sensor_face_plate__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/228908 | gcodes_0505.tar |
228837 | Automotive Trunk Door Fastening Hook | <p>Hooks under trunk door on car or minivan and provides hole for paracord. Should work for most vehicles. Originally designed to secure back of canoe to top of vehicle.</p><p>Parameterized Open SCAD file provided for fine tuning or extending the model.</p> | [
"hook",
"paracord",
"canoerack"
] | Hobby & Makers > Automotive | [
"228837/images/pxl_20220619_230915160.jpg",
"228837/images/pxl_20220619_230721638portrait.jpg"
] | [
"228837/gcode/trunk_door_hook__v0.gcode",
"228837/gcode/trunk_door_hook__v1.gcode",
"228837/gcode/trunk_door_hook__v2.gcode",
"228837/gcode/trunk_door_hook__v3.gcode",
"228837/gcode/trunk_door_hook__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/228837 | gcodes_0505.tar |
228808 | Feyachi Tac Light Pressure Switch M-Lok Mount |
<p>Modified this to work with Feyachi Tac Light pressure switches
https://www.amazon.com/gp/product/B07VGH8286/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1</p>
<p>or
https://www.amazon.com/Feyachi-Tactical-Flashlight-Rechargeable-Batteries/dp/B08771WZBY/ref=bmx_6/132-2186488-3870862?pd_rd_w=eIv7z&pf_rd... | [
"thingiverse"
] | Sports & Outdoor > Outdoor Sports | [
"228808/images/large_display_feyachi_tac_light_pressure_switch_m.jpg",
"228808/images/large_display_img_1593_228808.jpg"
] | [
"228808/gcode/Feyachi_Tac_Light_Pressure_Switch_M-Lok_Mount__v0.gcode",
"228808/gcode/Feyachi_Tac_Light_Pressure_Switch_M-Lok_Mount__v1.gcode",
"228808/gcode/Feyachi_Tac_Light_Pressure_Switch_M-Lok_Mount__v2.gcode",
"228808/gcode/Feyachi_Tac_Light_Pressure_Switch_M-Lok_Mount__v3.gcode",
"228808/gcode/Feyach... | Creative Commons — Attribution | https://www.printables.com/model/228808 | gcodes_0505.tar |
228807 | AR wall mount |
<p>Remixed AR Wall Mount to properly fit standard Mag well and to add hole for security chamber lock to secure to the mount.</p>
<p>NOTE: This is still just a plastic mount. The security portion of this is only to prevent accidental use not to prevent theft.</p>
<h3>Print Settings</h3>
<p><strong>Printer Brand:</str... | [
"thingiverse"
] | Household > Outdoor & Garden | [
"228807/images/large_display_ar_mount_1_228807.jpg",
"228807/images/large_display_img_1666_228807.jpg",
"228807/images/large_display_img_1665_228807.jpg",
"228807/images/large_display_img_1668_228807.jpg",
"228807/images/large_display_img_1667_228807.jpg"
] | [
"228807/gcode/AR_Mount_1__v0.gcode",
"228807/gcode/AR_Mount_1__v1.gcode",
"228807/gcode/AR_Mount_1__v2.gcode",
"228807/gcode/AR_Mount_1__v3.gcode",
"228807/gcode/AR_Mount_1__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/228807 | gcodes_0505.tar |
228723 | Aqara Shelf | <p>Although I have OctoPrint, I don't use a webcam connected to it to monitor prints remotely. Instead, I use a HomeKit solution with the Aqara G2H (or Pro) hub to manage a few printing needs. This is a shelf that I use to monitor the print bed for problems. I also have a HomeKit plug attached to the printer that I can... | [
"shelf",
"webcam",
"homekit",
"webcammount",
"aqara"
] | 3D Printers > Accessories | [
"228723/images/img_0653.jpg",
"228723/images/img_0652.jpg",
"228723/images/img_0651.jpg",
"228723/images/img_0656.jpg"
] | [
"228723/gcode/aqaraG2HShelf__v0.gcode",
"228723/gcode/aqaraG2HShelf__v1.gcode",
"228723/gcode/aqaraG2HShelf__v2.gcode",
"228723/gcode/aqaraG2HShelf__v3.gcode",
"228723/gcode/aqaraG2HShelf__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/228723 | gcodes_0505.tar |
228607 | CocaCola logo | <p>Simple CocaCola logo with back. Redraw of the original logo in Freecad.</p> | [
"cocacola"
] | Art & Design > 2D Plates & Logos | [
"228607/images/cocacolalogoplate.jpg"
] | [
"228607/gcode/CocaCola_with_back__v0.gcode",
"228607/gcode/CocaCola_with_back__v1.gcode",
"228607/gcode/CocaCola_with_back__v2.gcode",
"228607/gcode/CocaCola_with_back__v3.gcode",
"228607/gcode/CocaCola_with_back__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/228607 | gcodes_0505.tar |
228600 | DeWalt Lawn Mower Key | <p>My DeWalt lawn mower has a safety key. I've attached it to the mower with some string but wanted to print a backup in case the original key gets lost.</p><p>To avoid having supports in the small grooves in the key (which are necessary), print the key with hole side down and supports only on the base.</p> | [
"dewalt",
"lawnmower"
] | Household > Outdoor & Garden | [
"228600/images/screen-shot-2022-06-19-at-113934-am.jpg"
] | [
"228600/gcode/dewalt_key__v0.gcode",
"228600/gcode/dewalt_key__v1.gcode",
"228600/gcode/dewalt_key__v2.gcode",
"228600/gcode/dewalt_key__v3.gcode",
"228600/gcode/dewalt_key__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/228600 | gcodes_0505.tar |
228463 | Brio Wooden Railway Compatible Cross Roads |
<p>Wooden Railway Cross Roads. Compatible with Brio, BigJigs, Ikea, etc. We have loads of wooden railway, but no cross-roads, so I thought I would make one. I plan to add more pieces later.</p>
<p>Printed successfully with a Creality Ender-3 V2 (stock), with Creality white PLA filament, sliced in Cura with 25% infil... | [
"thingiverse"
] | Toys & Games > Building Toys | [
"228463/images/large_display_briocrossroadsv2_228463.jpg"
] | [
"228463/gcode/BrioCrossRoadsV2__v0.gcode",
"228463/gcode/BrioCrossRoadsV2__v1.gcode",
"228463/gcode/BrioCrossRoadsV2__v2.gcode",
"228463/gcode/BrioCrossRoadsV2__v3.gcode",
"228463/gcode/BrioCrossRoadsV2__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/228463 | gcodes_0505.tar |
228419 | Flower Pot | <p>Printsettings:</p><ul><li>No Top</li><li>No Infill</li><li>3 Walls</li></ul> | [
"vase",
"plantpot",
"flowerpot"
] | Household > Outdoor & Garden | [
"228419/images/vase_2022-jun-19_10-06-27am-000_customizedview253.jpg"
] | [
"228419/gcode/Vase__v0.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/228419 | gcodes_0505.tar |
228281 | Yet Another Stencil | <p>Yet another stencil.</p><ul><li>100mm x 200mm x 2.4mm</li><li>Functions as a straightedge</li><li>The large circle is the circumscribed circle for the five regular polygons (all have a radius of 80/3mm)</li><li>The medium circle is the inscribed circle for the square (radius of 40sqrt(2)/3mm)</li><li>The small circl... | [
"stencil",
"straightedge",
"polygons"
] | Learning > Math | [
"228281/images/screenshot_20220618_215309.jpg"
] | [
"228281/gcode/stencil__v0.gcode",
"228281/gcode/stencil__v1.gcode",
"228281/gcode/stencil__v2.gcode",
"228281/gcode/stencil__v3.gcode"
] | GNU General Public License v3.0 | https://www.printables.com/model/228281 | gcodes_0505.tar |
228199 | Magnetic Holder | <p>Magnetic couplers front and rear. I print in PETG 25% infill with a .4 nozzle at .2. The bottom of the mount is trimmed down for a better fit.</p> | [
"organizer",
"mount",
"ptfetube",
"magnetic",
"tube",
"ptfetubeorganizer",
"ptfetubemount",
"coupler",
"ptfecoupler"
] | 3D Printers > Other Printer Parts & Upgrades | [
"228199/images/magnetic-holder.jpg",
"228199/images/magnetic-holder-back.jpg"
] | [
"228199/gcode/Holder 5 magnets-Remix__v0.gcode",
"228199/gcode/Holder 5 magnets-Remix__v1.gcode",
"228199/gcode/Holder 5 magnets-Remix__v2.gcode",
"228199/gcode/Holder 5 magnets-Remix__v3.gcode",
"228199/gcode/Holder 5 magnets-Remix__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/228199 | gcodes_0505.tar |
228187 | twin cooling fan cover for Octopus Pro | <p>this is a model I created in Fusion 360 to mount a pair of fans to cool the drivers on the BTT Octopus pro board, easy to print, no supports required, it can be modified as required.</p> | [] | 3D Printers > Other Printer Parts & Upgrades | [
"228187/images/20220618_212709.jpg"
] | [
"228187/gcode/Octopus Cover for Fans v2__v0.gcode",
"228187/gcode/Octopus Cover for Fans v2__v1.gcode",
"228187/gcode/Octopus Cover for Fans v2__v2.gcode",
"228187/gcode/Octopus Cover for Fans v2__v3.gcode",
"228187/gcode/Octopus Cover for Fans v2__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/228187 | gcodes_0505.tar |
228168 | Buckle for 25mm strap |
<p>This is a replacement buckle for a backpack.</p>
<p>It is designed for a strap with 25mm width.</p>
<p>Check the print settings for more stability!</p>
<h3>Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Creality</p>
<p class="detail-setting printer"><strong>Printer: </strong>
<div><p>Ender 3 Pro</p... | [
"clip",
"buckle",
"25mm",
"strap",
"thingiverse",
"schnalle"
] | Sports & Outdoor > Outdoor Sports | [
"228168/images/large_display_schnalle_228168.jpg",
"228168/images/large_display_seite_228168.jpg",
"228168/images/large_display_back_228168.jpg",
"228168/images/large_display_front_228168.jpg",
"228168/images/large_display_seil_228168.jpg",
"228168/images/large_display_threema-20220320-222841772_228168.jp... | [
"228168/gcode/Schnalle__v0.gcode",
"228168/gcode/Schnalle__v1.gcode",
"228168/gcode/Schnalle__v2.gcode",
"228168/gcode/Schnalle__v3.gcode",
"228168/gcode/Schnalle__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/228168 | gcodes_0505.tar |
228142 | Fish Tank Handle for 3mm Glass | <p>Because they are often lost or broken, I have designed this handle for fish tanks or terrariums with 3mm glass tops on hinges. The days of using an office binder clip until it rusts away are gone! Additionally, this model is designed for individuals with low grip-strength or limited manual dexterity (especially via ... | [
"handle",
"grip",
"kids",
"aquarium",
"loop",
"accessibility",
"glass",
"fish",
"disability",
"fishtank",
"terrarium",
"handgrip"
] | Household > Pets | [
"228142/images/fish-tank-handle-use-2.jpg",
"228142/images/fish-tank-handle-use-1.jpg"
] | [
"228142/gcode/Fish Tank Handle 3mm Glass v2__v0.gcode",
"228142/gcode/Fish Tank Handle 3mm Glass v2__v1.gcode",
"228142/gcode/Fish Tank Handle 3mm Glass v2__v2.gcode",
"228142/gcode/Fish Tank Handle 3mm Glass v2__v3.gcode",
"228142/gcode/Fish Tank Handle 3mm Glass v2__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/228142 | gcodes_0505.tar |
228066 | base with dice for 40mm base | <p>This is a base for heros that have Pv so you dont have to move the dice with.</p> | [] | Toys & Games > Action Figures & Statues | [
"228066/images/index.jpg"
] | [
"228066/gcode/Base 40mm__v0.gcode",
"228066/gcode/Base 40mm__v1.gcode",
"228066/gcode/Base 40mm__v2.gcode",
"228066/gcode/Base 40mm__v3.gcode",
"228066/gcode/Base 40mm__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/228066 | gcodes_0505.tar |
227930 | Skoda coaster | <p>Change color for the best result.</p> | [
"kitchen",
"beer",
"water",
"can",
"cup",
"drink",
"coaster",
"mug",
"coffee",
"glass",
"skoda"
] | Household > Kitchen | [
"227930/images/1806-13-49-15.jpg",
"227930/images/1806-13-46-04.jpg"
] | [
"227930/gcode/skodacoaster__v0.gcode",
"227930/gcode/skodacoaster__v1.gcode",
"227930/gcode/skodacoaster__v2.gcode",
"227930/gcode/skodacoaster__v3.gcode",
"227930/gcode/skodacoaster__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/227930 | gcodes_0505.tar |
227859 | Nona's Flower Cutter | <p>Made for my Mother, this daffodil shaped cookie cutter was designed for her to make clay pottery flowers. </p> | [
"flower",
"cookie",
"cutter",
"clay",
"pottery",
"daffodil"
] | Household > Kitchen | [
"227859/images/nona-flower.jpg",
"227859/images/photo_2022-06-18_21-01-26.jpg"
] | [
"227859/gcode/Nona Flower v2__v0.gcode",
"227859/gcode/Nona Flower v2__v1.gcode",
"227859/gcode/Nona Flower v2__v2.gcode",
"227859/gcode/Nona Flower v2__v3.gcode",
"227859/gcode/Nona Flower v2__v4.gcode"
] | GNU General Public License v3.0 | https://www.printables.com/model/227859 | gcodes_0505.tar |
227847 | Key for outdoor tap 6.4mm square | [
"tap",
"outside",
"kraan",
"buiten"
] | Household > Outdoor & Garden | [
"227847/images/img_4429.jpg"
] | [
"227847/gcode/buitenkraan v1__v0.gcode",
"227847/gcode/buitenkraan v1__v1.gcode",
"227847/gcode/buitenkraan v1__v2.gcode",
"227847/gcode/buitenkraan v1__v3.gcode",
"227847/gcode/buitenkraan v1__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/227847 | gcodes_0505.tar | |
227840 | Continuity Macbook pro Magsafe Mount | <p>This is supposed to be used to hold your iphone above your macbook pro in order to use its camera as webcam.</p><p>If you use a non apple magsafe charger with a slightly different diameter you can adapt the size in openscad.</p> | [
"macbook",
"continuitycamera"
] | Gadgets > Portable Devices | [
"227840/images/img_1567.jpg",
"227840/images/img_1568.jpg"
] | [
"227840/gcode/continuity_macbook_pro_mount__v0.gcode",
"227840/gcode/continuity_macbook_pro_mount__v1.gcode",
"227840/gcode/continuity_macbook_pro_mount__v2.gcode",
"227840/gcode/continuity_macbook_pro_mount__v3.gcode",
"227840/gcode/continuity_macbook_pro_mount__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/227840 | gcodes_0505.tar |
227828 | Tissue Pack Dispenser | <p>A tissue pack dispenser. The First idea was because i needed a place in my Camper to store tissue packs but know i find it handy in at home as well. </p><p>It is made to hang on a flat surface. For that i used some kind of double sided tape in back-bottom area and sticked it to a cabinet. </p><p>Have... | [
"tissue",
"tissuedispenser",
"tissuebox"
] | Gadgets > Other Gadgets | [
"227828/images/22-06-18-08-19-28-0158.jpg",
"227828/images/22-06-18-08-20-01-0159.jpg"
] | [
"227828/gcode/Taschentuchalter_V1__v0.gcode",
"227828/gcode/Taschentuchalter_V1__v1.gcode",
"227828/gcode/Taschentuchalter_V1__v2.gcode",
"227828/gcode/Taschentuchalter_V1__v3.gcode",
"227828/gcode/Taschentuchalter_V1__v4.gcode"
] | GNU General Public License v3.0 | https://www.printables.com/model/227828 | gcodes_0505.tar |
227794 | Beer Only Coaster | <p>Here is ”Beer Only” coaster for those of you that need a separate coaster only dedicated for beer.</p> | [
"beer",
"coaster",
"drinkcoaster"
] | Household > Living Room | [
"227794/images/ac93127d-f479-4429-b0fa-5b2125345c4e.jpg"
] | [
"227794/gcode/Beer Coaster__v0.gcode",
"227794/gcode/Beer Coaster__v1.gcode",
"227794/gcode/Beer Coaster__v2.gcode",
"227794/gcode/Beer Coaster__v3.gcode",
"227794/gcode/Beer Coaster__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/227794 | gcodes_0505.tar |
227770 | Gridfinity tamiya panel line and weathering master | <h3><strong>Info</strong></h3><ul><li>fits 6 tamiya panel line accent color (40ml) or tamiya 40ml square bottle</li><li>fit 1 tamiya weathering master<br> </li></ul><h4><strong>Print instructions</strong></h4><ul><li>Filament material: Any type should be ok</li><li>Layer Height: 0.2-0.3</li><li>Infill: 10% or more... | [
"model",
"tamiya",
"gunplatools",
"gunpla",
"gundam",
"gridfinity",
"panelline"
] | Hobby & Makers > Organizers | [
"227770/images/20220618_082810.jpg",
"227770/images/20220618_082750.jpg"
] | [
"227770/gcode/Gridfinity Tamiya panel line__v0.gcode",
"227770/gcode/Gridfinity Tamiya panel line__v1.gcode",
"227770/gcode/Gridfinity Tamiya panel line__v2.gcode",
"227770/gcode/Gridfinity Tamiya panel line__v3.gcode",
"227770/gcode/Gridfinity Tamiya panel line__v4.gcode"
] | GNU General Public License v2.0 | https://www.printables.com/model/227770 | gcodes_0505.tar |
227662 | Vernier Calipers holder for pegboard | <p>this small easy-to-print callipers holder fits right into a standard key slot pegboard and holds a vernier callipers very well. print it with supports and 20% infill for good results</p> | [
"vernier",
"verniercalipers",
"capilers"
] | Household > Office | [
"227662/images/img_9709.jpg",
"227662/images/img_9705.jpg"
] | [
"227662/gcode/vernier_calipers_holder__v0.gcode",
"227662/gcode/vernier_calipers_holder__v1.gcode",
"227662/gcode/vernier_calipers_holder__v2.gcode",
"227662/gcode/vernier_calipers_holder__v3.gcode",
"227662/gcode/vernier_calipers_holder__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/227662 | gcodes_0505.tar |
227506 | Multimeter Cable and Probe Holder |
<p>A simple organizer to wind the multimeter cable and probe holder.</p>
<p>Fits the normal multimeter (70mmx 25mm)</p>
<p>Print with a brim for better adhesion.</p>
<h3>Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Creality</p>
<p class="detail-setting printer"><strong>Printer: </strong>
<div><p>End... | [
"thingiverse"
] | Hobby & Makers > Electronics | [
"227506/images/large_display_multimeter_cableholder_v1_227506.jpg",
"227506/images/large_display_multimeter_wireholder_227506.jpg"
] | [
"227506/gcode/MultiMeter_WireHolder__v0.gcode",
"227506/gcode/MultiMeter_WireHolder__v1.gcode",
"227506/gcode/MultiMeter_WireHolder__v2.gcode",
"227506/gcode/MultiMeter_WireHolder__v3.gcode",
"227506/gcode/MultiMeter_WireHolder__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/227506 | gcodes_0505.tar |
227488 | Component bending tool | [
"bender",
"component",
"diode",
"capacitor",
"tht",
"resistorbender"
] | Hobby & Makers > Electronics | [
"227488/images/dimensions.jpg"
] | [
"227488/gcode/resistor_bending_tool__v0.gcode",
"227488/gcode/resistor_bending_tool__v1.gcode",
"227488/gcode/resistor_bending_tool__v2.gcode",
"227488/gcode/resistor_bending_tool__v3.gcode",
"227488/gcode/resistor_bending_tool__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/227488 | gcodes_0505.tar | |
227479 | Simple small bulbous vase | <p>Just a small bulbous vase that can be used as simple decoration as it is, or to display some small flowers.</p> | [
"vase",
"planter",
"plantpot",
"flowerpot",
"indoorplanter"
] | Household > Home Decor | [
"227479/images/pxl_20220619_123652380.jpg",
"227479/images/pxl_20220619_123750256.jpg"
] | [
"227479/gcode/Vaso Prusa contest__v0.gcode",
"227479/gcode/Vaso Prusa contest__v1.gcode",
"227479/gcode/Vaso Prusa contest__v2.gcode",
"227479/gcode/Vaso Prusa contest__v3.gcode",
"227479/gcode/Vaso Prusa contest__v4.gcode"
] | GNU General Public License v3.0 | https://www.printables.com/model/227479 | gcodes_0506.tar |
227409 | Planter Benchy | <p>Planter Benchy</p><p>Printed on an Ender 3 Pro</p><p>Enlarged to 120%</p><p>Generic PLA</p><p>0.4 nozzle </p><p> </p> | [] | Household > Home Decor | [
"227409/images/img_4589.jpg"
] | [
"227409/gcode/PlanterBenchy__v0.gcode",
"227409/gcode/PlanterBenchy__v1.gcode",
"227409/gcode/PlanterBenchy__v2.gcode",
"227409/gcode/PlanterBenchy__v3.gcode",
"227409/gcode/PlanterBenchy__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/227409 | gcodes_0506.tar |
227317 | Delonghi EC680/685 Cup Support | <p>I'm using a bottomless portafilter for my Delonghi EC680 (similar to EC685), and it always annoyed me quite a bit, that the original cup holder has two holes where the coffee drips into, once the cups are removed, but now I only need one in the center, to avoid quite a mess.</p><p>So here is the cup holder with a si... | [
"coffee",
"thingiverse",
"portafilter",
"coffeemachine",
"delonghiec685",
"delonghiec680"
] | Household > Kitchen | [
"227317/images/large_display_img_8811_227317.jpg",
"227317/images/large_display_delonghi_ec680_support_227317.jpg"
] | [
"227317/gcode/Delonghi_EC680_Support__v0.gcode",
"227317/gcode/Delonghi_EC680_Support__v1.gcode",
"227317/gcode/Delonghi_EC680_Support__v2.gcode",
"227317/gcode/Delonghi_EC680_Support__v3.gcode",
"227317/gcode/Delonghi_EC680_Support__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/227317 | gcodes_0506.tar |
227280 | freezer door latch | <p>The distance between the screw hole and the hinge shaft is 94.5mm.</p> | [
"lock"
] | Household > Kitchen | [
"227280/images/img_2261.jpg"
] | [
"227280/gcode/fridge door latch__v0.gcode",
"227280/gcode/fridge door latch__v1.gcode",
"227280/gcode/fridge door latch__v2.gcode",
"227280/gcode/fridge door latch__v3.gcode",
"227280/gcode/fridge door latch__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/227280 | gcodes_0506.tar |
227105 | PS4 controller iPhone mini mount | <h3>Feature</h3><ul><li>Perfectly fits PS4 controller and iPhone 12 mini</li><li>PS4 controller clip into place, no rubber band needed</li><li>Print without support</li></ul><h3>Reference</h3><p>the PS4 controller dimensions are taken from here:</p><p><a href="https://www.printables.com/model/156650-controller-phone-mo... | [
"iphone",
"dualshock",
"ps4controller"
] | Gadgets > Video Games | [
"227105/images/fab5eb79-a723-49b4-8d84-ad44ed630709_1_102_o.jpg",
"227105/images/1e65375c-f995-4d3f-b07b-5559e06626f8_1_102_a.jpg"
] | [
"227105/gcode/PS4 controller iPhone mini mount__v0.gcode",
"227105/gcode/PS4 controller iPhone mini mount__v1.gcode",
"227105/gcode/PS4 controller iPhone mini mount__v2.gcode",
"227105/gcode/PS4 controller iPhone mini mount__v3.gcode",
"227105/gcode/PS4 controller iPhone mini mount__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/227105 | gcodes_0506.tar |
227024 | Mug |
<p>Mug</p>
Category: Kitchen & Dining
| [
"mug",
"thingiverse",
"coffeemug"
] | Household > Kitchen | [
"227024/images/mug_227024.jpg"
] | [
"227024/gcode/mug__v0.gcode",
"227024/gcode/mug__v1.gcode",
"227024/gcode/mug__v2.gcode",
"227024/gcode/mug__v3.gcode",
"227024/gcode/mug__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/227024 | gcodes_0506.tar |
226991 | Watering can for watering plants | <p>A simple little thing, tests your patiens while printing... but should stick well. I made a wooden handle for it because I like me some matirial mix. Oh and I DIY hydro dipped it (google it, its cool). Perfect finish for 3d printing because it hides some flaws.<br><br>I printed it really fast because I am impatient ... | [
"can",
"handle",
"turning",
"garden",
"wooden",
"wartering"
] | Household > Outdoor & Garden | [
"226991/images/ljdfp2ipcz591.jpg",
"226991/images/8cwrefqpcz591.jpg"
] | [
"226991/gcode/Watering Can__v0.gcode",
"226991/gcode/Watering Can__v1.gcode",
"226991/gcode/Watering Can__v2.gcode",
"226991/gcode/Watering Can__v3.gcode",
"226991/gcode/Watering Can__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/226991 | gcodes_0506.tar |
226876 | Obrysová mapa ČR | <p>Fotka: Mapa je na A4.</p> | [
"mapa",
"ceskarepublika",
"obkresleni"
] | Learning > Other 3D Objects for Learning | [
"226876/images/img_20220616_122036.jpg"
] | [
"226876/gcode/obrysova CR__v0.gcode",
"226876/gcode/obrysova CR__v1.gcode",
"226876/gcode/obrysova CR__v2.gcode",
"226876/gcode/obrysova CR__v3.gcode",
"226876/gcode/obrysova CR__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/226876 | gcodes_0506.tar |
226808 | REDRUM | <p>If you don't get the reference this might not be for you.<br><br>It's from the movie “The Shining”. Redrum was written in blood on a door (read it backwards) and the pattern is a creepy floor carpet in the movie.</p> | [] | Art & Design > Wall-mounted | [
"226808/images/pxl_20220616_052610513.jpg",
"226808/images/redrum.jpg"
] | [
"226808/gcode/redrum__v0.gcode",
"226808/gcode/redrum__v1.gcode",
"226808/gcode/redrum__v2.gcode",
"226808/gcode/redrum__v3.gcode",
"226808/gcode/redrum__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/226808 | gcodes_0506.tar |
226798 | Simple key tray | [] | Hobby & Makers > Organizers | [
"226798/images/base.jpg"
] | [
"226798/gcode/Simple key tray__v0.gcode",
"226798/gcode/Simple key tray__v1.gcode",
"226798/gcode/Simple key tray__v2.gcode",
"226798/gcode/Simple key tray__v3.gcode",
"226798/gcode/Simple key tray__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/226798 | gcodes_0506.tar | |
226769 | Spoon | <p>This is a Spoon. If you plan to use it make sure you use food grade filament. </p> | [] | Household > Kitchen | [
"226769/images/img_1362.jpg"
] | [
"226769/gcode/Spoon__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/226769 | gcodes_0506.tar |
226752 | Desk hole cap |
<p>Remixed this desk hole cap to add a chamfer and clean the model to avoid artifacts to the outer flange, you can download the scad file or use the customizer to customize this yourself.</p>
<h3>Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Creality</p>
<p class="detail-setting printer"><strong>Prin... | [
"thingiverse"
] | Household > Office | [
"226752/images/large_display_img_20210617_094411_226752.jpg",
"226752/images/large_display_img_20210617_094452_226752.jpg",
"226752/images/large_display_screenshot_2021-06-17_094515_226752.jpg",
"226752/images/large_display_push_cap_25_15_226752.jpg"
] | [
"226752/gcode/push_cap_25_15__v0.gcode",
"226752/gcode/push_cap_25_15__v1.gcode",
"226752/gcode/push_cap_25_15__v2.gcode",
"226752/gcode/push_cap_25_15__v3.gcode",
"226752/gcode/push_cap_25_15__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/226752 | gcodes_0506.tar |
226627 | Crocs Charm - Mercedes Logo | <p>Two color print without MMA (Prusa Slicer), PLA+. I made it with support on the edge.</p> | [
"mercedes",
"charm",
"crocs"
] | Fashion > Other Fashion Accessories | [
"226627/images/crocs-charm-mercedes.jpg"
] | [
"226627/gcode/Crocs charm mercedes__v0.gcode",
"226627/gcode/Crocs charm mercedes__v1.gcode",
"226627/gcode/Crocs charm mercedes__v2.gcode",
"226627/gcode/Crocs charm mercedes__v3.gcode",
"226627/gcode/Crocs charm mercedes__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/226627 | gcodes_0506.tar |
226469 | marine snap fastener |
<p>3d printable version of a snap fastener that will also connect to the real world marine snap fasteners.</p>
Category: Hobby
| [
"marine",
"snap",
"fastener",
"thingiverse"
] | Hobby & Makers > Other Ideas | [
"226469/images/large_display_marinesnap_226469.jpg"
] | [
"226469/gcode/marinesnap__v0.gcode",
"226469/gcode/marinesnap__v1.gcode",
"226469/gcode/marinesnap__v2.gcode",
"226469/gcode/marinesnap__v3.gcode",
"226469/gcode/marinesnap__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/226469 | gcodes_0506.tar |
226441 | Samsung A52S | <p>Pokud někdo bude postrádat otvor pro 3,5mm jack na sluchátka tak dejte vědět můžu ho tam dodat.</p> | [] | Gadgets > Portable Devices | [
"226441/images/20220615_144421.jpg"
] | [
"226441/gcode/Samsung A52S__v0.gcode",
"226441/gcode/Samsung A52S__v1.gcode",
"226441/gcode/Samsung A52S__v2.gcode",
"226441/gcode/Samsung A52S__v3.gcode",
"226441/gcode/Samsung A52S__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/226441 | gcodes_0506.tar |
226431 | AVM FRITZ!Box 6590 Cable Wandhalterung / Wall mount | <p>The bracket must be printed twice.<br>I would take PETG but it also works with PLA.<br>1.2mm+ wall thickness and min 20% infill.</p><p>Support is not required.</p> | [
"wall",
"mount",
"wallmount",
"router",
"germany",
"avm",
"fritzbox",
"fritzbox6590"
] | Household > Office | [
"226431/images/fritzbox_6590_cable_wandhalterung_v2_2022-jun-15_.jpg"
] | [
"226431/gcode/FRITZBox_6590_Cable_Wandhalterung_V2__v0.gcode",
"226431/gcode/FRITZBox_6590_Cable_Wandhalterung_V2__v1.gcode",
"226431/gcode/FRITZBox_6590_Cable_Wandhalterung_V2__v2.gcode",
"226431/gcode/FRITZBox_6590_Cable_Wandhalterung_V2__v3.gcode",
"226431/gcode/FRITZBox_6590_Cable_Wandhalterung_V2__v4.g... | GNU General Public License v2.0 | https://www.printables.com/model/226431 | gcodes_0506.tar |
226320 | 7*7 Drag Chain Ends |
<p>7*7 Drag Chain ends. Seen on Voron v0 & ERCF.</p>
Category: 3D Printer Parts
| [
"thingiverse"
] | 3D Printers > Other Printer Parts & Upgrades | [
"226320/images/large_display_77_ends_226320.jpg"
] | [
"226320/gcode/77_ends__v0.gcode",
"226320/gcode/77_ends__v1.gcode",
"226320/gcode/77_ends__v2.gcode",
"226320/gcode/77_ends__v3.gcode",
"226320/gcode/77_ends__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/226320 | gcodes_0506.tar |
226224 | Sailor Moon brooch with hole |
<p>its like the brooch but it has a hole to make it a necklace or earrings</p>
Category: Jewelry
| [
"thingiverse"
] | Fashion > Women | [
"226224/images/large_display_sailormoonearringmesh_226224.jpg"
] | [
"226224/gcode/Sailormoonearringmesh__v0.gcode",
"226224/gcode/Sailormoonearringmesh__v1.gcode",
"226224/gcode/Sailormoonearringmesh__v2.gcode",
"226224/gcode/Sailormoonearringmesh__v3.gcode",
"226224/gcode/Sailormoonearringmesh__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/226224 | gcodes_0506.tar |
226154 | Gopro 9/10 fpv case with ND Filters | <p>GoPro 9/10 universal case for fpv drone and others. This has the capacity to put a GoPro with external ND filter</p>
<h3>Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Creality</p>
<p class="detail-setting printer"><strong>Printer: </strong>
<div><p>Ender 3</p></div>
<p><strong>Rafts:</strong></p>
<p>... | [
"gopro",
"fpv",
"gopromount",
"ndfilter",
"thingiverse",
"fpvcameramount",
"fpvcamera",
"goprohero9",
"goprohero10",
"goprohero9mount",
"goprohero10case",
"goprondfilter"
] | Gadgets > Photo & Video | [
"226154/images/large_display_whatsapp_image_2022-06-14_at_92542.jpg",
"226154/images/large_display_whatsapp_image_2022-06-14_at_92541.jpg",
"226154/images/large_display_whatsapp_image_2022-06-14_at_92541.jpg",
"226154/images/large_display_whatsapp_image_2022-06-14_at_92542.jpg",
"226154/images/large_display... | [
"226154/gcode/GoPro10__v0.gcode",
"226154/gcode/GoPro10__v1.gcode",
"226154/gcode/GoPro10__v2.gcode",
"226154/gcode/GoPro10__v3.gcode",
"226154/gcode/GoPro10__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/226154 | gcodes_0506.tar |
226034 | Lego Brick Updated | <p>Updated version of my Lego Brick: <a href="https://www.printables.com/model/168981-1x2-bulding-block-lego-compatible">https://www.printables.com/model/168981-1x2-bulding-block-lego-compatible</a> </p> | [
"brick",
"lego",
"legobrick",
"1x2"
] | Toys & Games > Building Toys | [
"226034/images/image1.jpg",
"226034/images/image2.jpg"
] | [
"226034/gcode/lego brick 2__v0.gcode",
"226034/gcode/lego brick 2__v1.gcode",
"226034/gcode/lego brick 2__v2.gcode",
"226034/gcode/lego brick 2__v3.gcode",
"226034/gcode/lego brick 2__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/226034 | gcodes_0506.tar |
226006 | 300 Winchester Magnum | <p>This is a scare and dimensionally correct print of a 300 winchester mag cartridge.</p>
Category: 3D Printing | [
"thingiverse"
] | Hobby & Makers > Other Ideas | [
"226006/images/09b42c6b7070c3d2f26aeaf6aeb2c5bf_display_large_22.jpg",
"226006/images/9650ca5d689335361ca1bb093d2055bb_display_large_22.jpg"
] | [
"226006/gcode/300_win_mag__v0.gcode",
"226006/gcode/300_win_mag__v1.gcode",
"226006/gcode/300_win_mag__v2.gcode",
"226006/gcode/300_win_mag__v3.gcode",
"226006/gcode/300_win_mag__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/226006 | gcodes_0506.tar |
226004 | 300 black out |
<p>This is a scare and dimensionally correct print of a 300 blackout cartridge.</p>
Category: 3D Printing
| [
"thingiverse"
] | Hobby & Makers > Other Ideas | [
"226004/images/4461da6194ba84d83babc49ccc0342e6_display_large_22.jpg"
] | [
"226004/gcode/300_blackout__v0.gcode",
"226004/gcode/300_blackout__v1.gcode",
"226004/gcode/300_blackout__v2.gcode",
"226004/gcode/300_blackout__v3.gcode",
"226004/gcode/300_blackout__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/226004 | gcodes_0506.tar |
225978 | Mini Z-Brace | <p>I created this Z-axis brace to help maintain the squareness of the Mini once you get it dialed in. I wanted a brace that mounted to the outside surface of the Y-axis extrusion. All the others I found mounted to the top surface, and was “difficult” to access the hardware while the heat bed was in place. &... | [
"brace",
"mini",
"support",
"z",
"prusamini"
] | 3D Printers > Other Printer Parts & Upgrades | [
"225978/images/brace-3.jpg",
"225978/images/brace-1.jpg",
"225978/images/brace-2.jpg"
] | [
"225978/gcode/Z-BRACE - Mini__v0.gcode",
"225978/gcode/Z-BRACE - Mini__v1.gcode",
"225978/gcode/Z-BRACE - Mini__v2.gcode",
"225978/gcode/Z-BRACE - Mini__v3.gcode",
"225978/gcode/Z-BRACE - Mini__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/225978 | gcodes_0506.tar |
225907 | Sturdy Holder for HEPA Air Filter |
<p>This design is great, but the holder is flimsy and didn't really hold it well, so I designed something a bit more massive which will take a beating (mine is positioned against the door and the door pushes against it deliberately so that air vents through the crack.</p>
<p>Enjoy! Tips always appreciated tips@light... | [
"thingiverse"
] | 3D Printers > Accessories | [
"225907/images/large_display_hepa_air_filter_holder_225907.jpg",
"225907/images/large_display_img_1159_225907.jpg"
] | [
"225907/gcode/hepa_air_filter_holder__v0.gcode",
"225907/gcode/hepa_air_filter_holder__v1.gcode",
"225907/gcode/hepa_air_filter_holder__v2.gcode",
"225907/gcode/hepa_air_filter_holder__v3.gcode",
"225907/gcode/hepa_air_filter_holder__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/225907 | gcodes_0506.tar |
225906 | Open source hardware & software 2d logo | <p>I printed with 0.2mm without solid top and bottom layers, and added extra perimeters to make it stand out more.</p> | [] | Art & Design > 2D Plates & Logos | [
"225906/images/screenshot-2022-06-14-at-151610.jpg"
] | [
"225906/gcode/open_source_hardware_software__v0.gcode",
"225906/gcode/open_source_hardware_software__v1.gcode",
"225906/gcode/open_source_hardware_software__v2.gcode",
"225906/gcode/open_source_hardware_software__v3.gcode",
"225906/gcode/open_source_hardware_software__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/225906 | gcodes_0506.tar |
225894 | Pot | <p>Pot.</p> | [
"pot"
] | Household > Home Decor | [
"225894/images/pot.jpg"
] | [
"225894/gcode/pot__v0.gcode",
"225894/gcode/pot__v1.gcode",
"225894/gcode/pot__v2.gcode",
"225894/gcode/pot__v3.gcode",
"225894/gcode/pot__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/225894 | gcodes_0506.tar |
225827 | Camera Quarter Dollar Tripod Plate Driver | <p>For years I've carried a US Quarter Dollar as it fits every tripod plate thumbscrew. Finally got round to making a nifty holder thingy for it.</p><p>And, hey - it kinda looks like a tiny camera!</p><p>A Quarter Dollar coin snaps into it perfectly if you print it from the attached gcode file with PETG. I ... | [] | Gadgets > Photo & Video | [
"225827/images/img_1309.jpg"
] | [
"225827/gcode/coin_holder_quarter_dollar__v0.gcode",
"225827/gcode/coin_holder_quarter_dollar__v3.gcode",
"225827/gcode/coin_holder_quarter_dollar__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/225827 | gcodes_0506.tar |
225728 | Minnesota Love | <p>Now you can show your love for the greatest state in the union (I may be biased). No supports needed. </p> | [
"love",
"heart",
"state",
"minnesota"
] | Art & Design > Other Art & Designs | [
"225728/images/4e56e7bd-a01a-4711-84fa-84c1252d3e1c.jpg",
"225728/images/fccde63c-1d28-42ab-9f5e-79734f64c501.jpg"
] | [
"225728/gcode/MN Heart__v0.gcode",
"225728/gcode/MN Heart__v1.gcode",
"225728/gcode/MN Heart__v2.gcode",
"225728/gcode/MN Heart__v3.gcode",
"225728/gcode/MN Heart__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/225728 | gcodes_0506.tar |
225701 | Worm Paintbrush Holder | <p>You may need to straighten it in the buildplate, so ensure a even print</p> | [
"accessory",
"painting",
"worm"
] | Art & Design > Other Art & Designs | [
"225701/images/wormref.jpg"
] | [
"225701/gcode/Worm__v0.gcode",
"225701/gcode/Worm__v1.gcode",
"225701/gcode/Worm__v2.gcode",
"225701/gcode/Worm__v3.gcode",
"225701/gcode/Worm__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/225701 | gcodes_0506.tar |
225683 | Simple Road | [
"3d",
"road",
"blender",
"prusamini"
] | World & Scans > Architecture & Urbanism | [
"225683/images/masterpiece.jpg",
"225683/images/screen-shot-2022-06-14-at-035547.jpg",
"225683/images/screen-shot-2022-06-14-at-035417.jpg"
] | [
"225683/gcode/road__v0.gcode",
"225683/gcode/road__v1.gcode",
"225683/gcode/road__v2.gcode",
"225683/gcode/road__v3.gcode",
"225683/gcode/road__v4.gcode"
] | GNU General Public License v3.0 | https://www.printables.com/model/225683 | gcodes_0506.tar | |
225637 | Male to Male Garden Hose Adapter | <p>A male to male adapter for a standard garden hose.</p>
<h3>Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Prusa</p>
<p class="detail-setting printer"><strong>Printer: </strong>
<div><p>i3 MK3</p></div>
<p><strong>Rafts:</strong></p>
<p>No</p>
<p class="detail-setting supports"><strong>Supports: </stro... | [
"thingiverse",
"gardenhose",
"hoseadapter"
] | Household > Outdoor & Garden | [
"225637/images/large_display_20200606_113004_225637.jpg",
"225637/images/large_display_20200606_113015_225637.jpg",
"225637/images/large_display_20200606_113110_225637.jpg",
"225637/images/large_display_20200606_113118_225637.jpg",
"225637/images/large_display_male_to_male_hose_adapter_small_225.jpg"
] | [
"225637/gcode/Male_to_Male_Hose_Adapter_Small__v0.gcode",
"225637/gcode/Male_to_Male_Hose_Adapter_Small__v1.gcode",
"225637/gcode/Male_to_Male_Hose_Adapter_Small__v2.gcode",
"225637/gcode/Male_to_Male_Hose_Adapter_Small__v3.gcode",
"225637/gcode/Male_to_Male_Hose_Adapter_Small__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/225637 | gcodes_0506.tar |
225400 | Fysetc 3.2 LCD back cover (Prusa Mini) | [
"lcdcover",
"prusamini",
"lcddisplay",
"fysetc",
"backcover"
] | 3D Printers > Prusa Parts & Upgrades | [
"225400/images/back-cover-2.jpg",
"225400/images/20220613_173634_3.jpg",
"225400/images/20220613_174207_2.jpg"
] | [
"225400/gcode/fysetc-32-lcd-back-cover__v0.gcode",
"225400/gcode/fysetc-32-lcd-back-cover__v1.gcode",
"225400/gcode/fysetc-32-lcd-back-cover__v2.gcode",
"225400/gcode/fysetc-32-lcd-back-cover__v3.gcode",
"225400/gcode/fysetc-32-lcd-back-cover__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/225400 | gcodes_0506.tar | |
225350 | Door stop |
<p>A basic wedge type door stop to keep a door open or closed.</p>
Category: Household Supplies
| [
"household",
"doorstop",
"thingiverse"
] | Household > Other House Equipment | [
"225350/images/3c0ff4a8dfb72db5ee55c6eca055931c_display_large_22.jpg",
"225350/images/f32deff1637510622f6b44c960bdb827_display_large_22.jpg"
] | [
"225350/gcode/door_stop__v0.gcode",
"225350/gcode/door_stop__v1.gcode",
"225350/gcode/door_stop__v2.gcode",
"225350/gcode/door_stop__v3.gcode",
"225350/gcode/door_stop__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/225350 | gcodes_0506.tar |
225335 | Yet another screwdriver handle |
<p>I had a set of changeable hex bits with an extension, but the set didn't include a handle.</p>
<p>The slot on the handle is very tight. I used brute force while the handle was still warm to get that extension piece in there. Now I can use it as a handle for the changeable hex bits.</p>
Category: Parts
| [
"tool",
"handle",
"screwdriver",
"handtool",
"thingiverse"
] | Hobby & Makers > Other Ideas | [
"225335/images/a3e4d247d500bd6b9633aff8e4b609a5_display_large_22.jpg",
"225335/images/b2d3d197ccb0704edbd7707d8b958e8b_display_large_22.jpg"
] | [
"225335/gcode/handle__v0.gcode",
"225335/gcode/handle__v1.gcode",
"225335/gcode/handle__v2.gcode",
"225335/gcode/handle__v3.gcode",
"225335/gcode/handle__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/225335 | gcodes_0506.tar |
225329 | Bike aerobar BTA bottle cage mount |
<p>A mounting plate for a standard bike bottle cage so it can be mounted between the arms on an aerobar. Designed for 3T Vola aerobars, where the extensions are really close to each other and most BTA mounts don't work.</p>
<p>The plate should be attached to aerobar extension with 4 small zip ties or something equiv... | [
"sports",
"thingiverse",
"cycling",
"triathlon",
"triathlonbike",
"bottlemount",
"ironmantriathlon",
"bicycling"
] | Sports & Outdoor > Outdoor Sports | [
"225329/images/474567f304949b74e1200ca025f100ee_display_large_22.jpg",
"225329/images/141a299b2f25cc87eeaa98db502500f5_display_large_22.jpg",
"225329/images/638d787357f2fbd0e8c44874f7e6455d_display_large_22.jpg"
] | [
"225329/gcode/plate__v0.gcode",
"225329/gcode/plate__v1.gcode",
"225329/gcode/plate__v2.gcode",
"225329/gcode/plate__v3.gcode",
"225329/gcode/plate__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/225329 | gcodes_0506.tar |
225161 | Earphones trigger for shooting time lapse | <p> In smartphones, you can take pictures not only using the interface, but also using the volume keys. If you have earphones, you can use their buttons as a trigger to record a timelapse! Additional head movements are added automatically to the g-code with a slicer (e.g. cura), or with the "find and... | [
"camera",
"video",
"smartphone",
"printing",
"trigger",
"timelapse",
"shoot",
"earphones"
] | 3D Printers > Accessories | [
"225161/images/prev-hp.jpg",
"225161/images/mod-pic.jpg"
] | [
"225161/gcode/trigger__v0.gcode",
"225161/gcode/trigger__v1.gcode",
"225161/gcode/trigger__v2.gcode",
"225161/gcode/trigger__v3.gcode",
"225161/gcode/trigger__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/225161 | gcodes_0506.tar |
225154 | Spool adapter 53mm/73mm | [
"spool",
"adapter"
] | 3D Printers > Other Printer Parts & Upgrades | [
"225154/images/20220613_103839.jpg",
"225154/images/20220613_103851.jpg"
] | [
"225154/gcode/Spool adapter 53mm_73mm__v0.gcode",
"225154/gcode/Spool adapter 53mm_73mm__v1.gcode",
"225154/gcode/Spool adapter 53mm_73mm__v2.gcode",
"225154/gcode/Spool adapter 53mm_73mm__v3.gcode",
"225154/gcode/Spool adapter 53mm_73mm__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/225154 | gcodes_0506.tar | |
225107 | Lens cap holder 37-49-58 mm (micro four thirds) | <p>A lens cap holder remixed from <a href="https://www.thingiverse.com/thing:3111709">https://www.thingiverse.com/thing:3111709</a> </p><p>I use it for my usual set of m4/3 lenses: Olympus 14-150 mm (58 mm lens cap), Olympus 14-42 mm EZ (pancake, 37mm lens cap) and Panasonic 1.7/25mm (49 mm lens cap)</p><p>Best fi... | [
"camera",
"lens",
"photo",
"lenscap",
"photography",
"lenscapholder",
"capholder"
] | Gadgets > Photo & Video | [
"225107/images/20220613_084256.jpg"
] | [
"225107/gcode/capholder_58-49-37mm__v0.gcode",
"225107/gcode/capholder_58-49-37mm__v1.gcode",
"225107/gcode/capholder_58-49-37mm__v2.gcode",
"225107/gcode/capholder_58-49-37mm__v3.gcode",
"225107/gcode/capholder_58-49-37mm__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/225107 | gcodes_0506.tar |
224926 | Xiaomi Mi Vacuum Cleaner mini reducer adapter 75 degree | [
"cleanup",
"household",
"adapter",
"cleaning",
"vacuum",
"xiaomi",
"house",
"clean",
"vacuumadapter",
"cleaner",
"hoover",
"vacuumcleaner",
"reducer",
"cleaningtools",
"hoovervacuum"
] | Household > Other House Equipment | [
"224926/images/20220612_225902.jpg",
"224926/images/20220612_225818.jpg",
"224926/images/20220612_225810.jpg",
"224926/images/20220612_225805.jpg",
"224926/images/20220612_225828.jpg"
] | [
"224926/gcode/Xiaomi Mi Vacuum Cleaner mini reducer adapter 75 degree__v0.gcode",
"224926/gcode/Xiaomi Mi Vacuum Cleaner mini reducer adapter 75 degree__v1.gcode",
"224926/gcode/Xiaomi Mi Vacuum Cleaner mini reducer adapter 75 degree__v2.gcode",
"224926/gcode/Xiaomi Mi Vacuum Cleaner mini reducer adapter 75 d... | Creative Commons — Public Domain | https://www.printables.com/model/224926 | gcodes_0506.tar | |
224837 | Roller Shade Driver E1 guide | <p>My roller blinds sometimes got stuck behind the Roller Shade Driver E1. <br>This guide is to prevent that.</p><p>It is mounted behind the base plate, using the same screws.</p> | [
"roller",
"aqara"
] | Household > Other House Equipment | [
"224837/images/20220612_215212.jpg",
"224837/images/20220612_215146.jpg",
"224837/images/20220612_214920.jpg"
] | [
"224837/gcode/aqara roller guide v7__v0.gcode",
"224837/gcode/aqara roller guide v7__v2.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/224837 | gcodes_0506.tar |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.