model_id stringlengths 1 7 | name stringlengths 1 169 | description stringlengths 0 38.2k | tags listlengths 0 284 | printables_category stringclasses 76
values | image_paths listlengths 0 62 | gcode_paths listlengths 1 10 | license stringclasses 7
values | source stringlengths 34 40 | shard_file stringclasses 546
values |
|---|---|---|---|---|---|---|---|---|---|
53684 | Milwaukee M18 Battery Holder With Lock | <p>Milwaukee M18 Battery Holder With Lock. So yit can be used inside van etc...<br/>
Easy to print.<br/>
Also I have created "short" version of this without lock to use inside workshop.<br/>
<a href="https://www.printables.com/model/53685">https://www.prusaprinters.org/prints/53685</a></p>
<h3>Print instructions</h3>... | [
"thingiverse",
"milwaukee",
"m18",
"milwaukeem18"
] | Hobby & Makers > Organizers | [
"53684/images/large_display_1_53684.jpg",
"53684/images/large_display_1a4f2978-6b45-439e-a33e-52cef35f036.jpg",
"53684/images/large_display_pxl_20210122_103850125_53684.jpg",
"53684/images/large_display_pxl_20210122_103318966_53684.jpg",
"53684/images/large_display_pxl_20210122_103154946_53684.jpg",
"5368... | [
"53684/gcode/milwaukeem18_with_lock_final__v0.gcode",
"53684/gcode/milwaukeem18_with_lock_final__v1.gcode",
"53684/gcode/milwaukeem18_with_lock_final__v2.gcode",
"53684/gcode/milwaukeem18_with_lock_final__v3.gcode",
"53684/gcode/milwaukeem18_with_lock_final__v4.gcode",
"53684/gcode/milwaukeem18_with_lock_... | Creative Commons — Attribution | https://www.printables.com/model/53684 | gcodes_0026.tar |
25814 | Bias Tape Maker 5cm (Zakladač šikmého proužku) | <p>This is a remix of bias tape maker from <a href="https://www.thingiverse.com/thing:3880491">https://www.thingiverse.com/thing:3880491</a> by Oscarko. It is increased by 150% (for 5cm tape), the wings are clipped a bit and the bottom is flattened for better bed adhesion.</p>
<h3>Print instructions</h3><p>Orientation ... | [
"sewing",
"bias"
] | Hobby & Makers > Tools | [
"25814/images/90377374_2598579240411909_4726366099111673856_n.jpg",
"25814/images/90387698_302165687423820_2304818427585363968_n.jpg",
"25814/images/89619032_240667316955908_8810571863768956928_n.jpg"
] | [
"25814/gcode/biastapehalf__v0.gcode",
"25814/gcode/biastapehalf__v1.gcode",
"25814/gcode/biastapehalf__v2.gcode",
"25814/gcode/biastapehalf__v3.gcode",
"25814/gcode/biastapehalf__v4.gcode",
"25814/gcode/biastapehalf__v5.gcode",
"25814/gcode/biastapehalf__v6.gcode",
"25814/gcode/biastapehalf__v7.gcode"... | Creative Commons — Attribution | https://www.printables.com/model/25814 | gcodes_0026.tar |
1324171 | Nintendo Switch 2 Joy-Con Grip | <p>This is a Nintendo Switch 2 Joy-Con Grip. It works better with magnets, but is also fine without. 4 magnets (8x3mm) can be pressed into the sides.</p><p>Best to print standing up. Supports do help with the bridge up top, but are not strictly necessary.</p> | [
"nintendo",
"switch",
"joycon",
"switch2",
"joycon2"
] | Gadgets > Portable Devices | [
"1324171/images/a7ffc24c-ceeb-4142-bbc4-ed04dc1d7778_1_105_c.jpg",
"1324171/images/3f67ae36-19dc-46c7-8c4f-ebc5c8c0ec66_1_105_c.jpg"
] | [
"1324171/gcode/Nintendo-Switch-2-Joycon-Grip__v0.gcode",
"1324171/gcode/Nintendo-Switch-2-Joycon-Grip__v1.gcode",
"1324171/gcode/Nintendo-Switch-2-Joycon-Grip__v2.gcode",
"1324171/gcode/Nintendo-Switch-2-Joycon-Grip__v3.gcode",
"1324171/gcode/Nintendo-Switch-2-Joycon-Grip__v4.gcode",
"1324171/gcode/Ninten... | Creative Commons — Attribution | https://www.printables.com/model/1324171 | gcodes_0026.tar |
1259665 | Tung Tung Tung Sahur | <p>Tung tung tung tung sahur. Scary anomaly that only comes out at Suhoor. it is said that if someone is called for Suhoor three times and does not answer, then this creature comes to your house. Hi, very scary. Tung tung usually makes a sound like a slit drum tung tung tung tung. Share it with your friends who have tr... | [
"meme",
"italian",
"brainrot",
"italianbrainrot"
] | Toys & Games > Action Figures & Statues | [
"1259665/images/tungtungtungsahur.jpg",
"1259665/images/tungtungtungsahur.jpg",
"1259665/images/tungtungtungsahur_uncolored.jpg"
] | [
"1259665/gcode/TungTungTungSahur__v0.gcode",
"1259665/gcode/TungTungTungSahur__v1.gcode",
"1259665/gcode/TungTungTungSahur__v2.gcode",
"1259665/gcode/TungTungTungSahur__v3.gcode",
"1259665/gcode/TungTungTungSahur__v4.gcode",
"1259665/gcode/TungTungTungSahur__v5.gcode",
"1259665/gcode/TungTungTungSahur__... | Creative Commons — Attribution | https://www.printables.com/model/1259665 | gcodes_0026.tar |
732947 | Milk Crate - No Supports | [
"box",
"container",
"crate",
"milk"
] | Household > Home Decor | [
"732947/images/screenshot-2024-01-21-at-30230-pm.jpg"
] | [
"732947/gcode/milk-crate__v0.gcode",
"732947/gcode/milk-crate__v1.gcode",
"732947/gcode/milk-crate__v2.gcode",
"732947/gcode/milk-crate__v3.gcode",
"732947/gcode/milk-crate__v4.gcode",
"732947/gcode/milk-crate__v5.gcode",
"732947/gcode/milk-crate__v6.gcode",
"732947/gcode/milk-crate__v7.gcode",
"732... | Creative Commons — Attribution | https://www.printables.com/model/732947 | gcodes_0026.tar | |
648554 | Stealth Press handle | <p>i have added a handle to the top</p><p>I tried to adapt the design of the rest of this project. Hope this worked out for the creator and makers</p> | [
"press",
"tool",
"handle",
"stealth"
] | Hobby & Makers > Tools | [
"648554/images/7x_stealth_press_r11.jpg",
"648554/images/8x_stealth_press_r11.jpg"
] | [
"648554/gcode/top_x1_r1.1 handle3__v0.gcode",
"648554/gcode/top_x1_r1.1 handle3__v1.gcode",
"648554/gcode/top_x1_r1.1 handle3__v2.gcode",
"648554/gcode/top_x1_r1.1 handle3__v3.gcode",
"648554/gcode/top_x1_r1.1 handle3__v4.gcode",
"648554/gcode/top_x1_r1.1 handle3__v5.gcode",
"648554/gcode/top_x1_r1.1 ha... | GNU General Public License v3.0 | https://www.printables.com/model/648554 | gcodes_0026.tar |
632765 | Laptop Stand | <p>Slighlty modified version of a stand, with only slot 20mm wide.</p> | [
"laptop",
"laptopstand"
] | Gadgets > Computers | [
"632765/images/2023-10-31_21-53.jpg"
] | [
"632765/gcode/laptop_stand__v0.gcode",
"632765/gcode/laptop_stand__v1.gcode",
"632765/gcode/laptop_stand__v2.gcode",
"632765/gcode/laptop_stand__v3.gcode",
"632765/gcode/laptop_stand__v4.gcode",
"632765/gcode/laptop_stand__v5.gcode",
"632765/gcode/laptop_stand__v6.gcode",
"632765/gcode/laptop_stand__v... | Creative Commons — Public Domain | https://www.printables.com/model/632765 | gcodes_0026.tar |
529602 | Gridfinity Deburring Tool Holder | <p>This is tray to hold my <a href="https://www.amazon.co.uk/dp/B0B63QQ7JD?psc=1&ref=ppx_yo2ov_dt_b_product_details">deburring tool</a> in my draw using Gridfinity. I bought this from Amazon, it might work for other models.</p><p>This was created in onshape from a set of <a href="https://www.youtube.com/redirect?ev... | [
"storage",
"orgainization",
"gridfinity"
] | Hobby & Makers > Organizers | [
"529602/images/pxl_20230717_143017309.jpg"
] | [
"529602/gcode/Deburring Tool__v0.gcode",
"529602/gcode/Deburring Tool__v1.gcode",
"529602/gcode/Deburring Tool__v2.gcode",
"529602/gcode/Deburring Tool__v3.gcode",
"529602/gcode/Deburring Tool__v4.gcode",
"529602/gcode/Deburring Tool__v5.gcode",
"529602/gcode/Deburring Tool__v6.gcode",
"529602/gcode/D... | Creative Commons — Attribution | https://www.printables.com/model/529602 | gcodes_0026.tar |
510984 | Polymaker Cardboard Spool Adapter | <p>The Cardboard Spool Adapter from Polymaker helps to reduce friction for a more reliable unwinding of the spool itself (especially if the spool got damaged somehow).</p><p>Since I have the stock Voron spoolholder mechanisms in place I didn't need the outer shell on the spool so I simply cut those away. I also added a... | [
"spool",
"spoolholder",
"adapter",
"cardboard",
"polymaker",
"adapters"
] | 3D Printers > Other Printer Parts & Upgrades | [
"510984/images/img_3336.jpg"
] | [
"510984/gcode/Polymaker_Innenring_V01__v0.gcode",
"510984/gcode/Polymaker_Innenring_V01__v1.gcode",
"510984/gcode/Polymaker_Innenring_V01__v2.gcode",
"510984/gcode/Polymaker_Innenring_V01__v3.gcode",
"510984/gcode/Polymaker_Innenring_V01__v4.gcode",
"510984/gcode/Polymaker_Innenring_V01__v5.gcode",
"510... | Creative Commons — Attribution | https://www.printables.com/model/510984 | gcodes_0026.tar |
468237 | Dinosaur Phone/Tablet Stand | <p><i>An improved dinosaur mobile phone inspired by Max Harrington (Thingiverse: @airplanenerd)</i></p><p>This cute dinosaur phone stand is the perfect addition to any desk, table, or nightstand. The stand is designed in the shape of a cute dinosaur, adding a touch of whimsy to your space. Designed sturdy and durable.<... | [
"holder",
"landscape",
"stand",
"pixel",
"cute",
"dinosaur",
"dino",
"samsung",
"phone",
"ipad",
"iphone",
"smartphone",
"android",
"tablet",
"portable",
"motorola",
"portrait",
"accesory",
"tab",
"lg"
] | Gadgets > Portable Devices | [
"468237/images/pxl_20230501_024307875.jpg"
] | [
"468237/gcode/Dinosaur_Phone_Stand__v0.gcode",
"468237/gcode/Dinosaur_Phone_Stand__v1.gcode",
"468237/gcode/Dinosaur_Phone_Stand__v2.gcode",
"468237/gcode/Dinosaur_Phone_Stand__v3.gcode",
"468237/gcode/Dinosaur_Phone_Stand__v4.gcode",
"468237/gcode/Dinosaur_Phone_Stand__v5.gcode",
"468237/gcode/Dinosaur... | Creative Commons — Attribution | https://www.printables.com/model/468237 | gcodes_0026.tar |
458115 | Samsung Galaxy Watch 5 40mm Charging Stand | [] | Gadgets > Computers | [
"458115/images/featured_preview_606aa29c-5e70-4bdb-b53a-67dd87ab2500.jpg"
] | [
"458115/gcode/Galaxy_Watch_40mm__v0.gcode",
"458115/gcode/Galaxy_Watch_40mm__v1.gcode",
"458115/gcode/Galaxy_Watch_40mm__v2.gcode",
"458115/gcode/Galaxy_Watch_40mm__v3.gcode",
"458115/gcode/Galaxy_Watch_40mm__v4.gcode",
"458115/gcode/Galaxy_Watch_40mm__v5.gcode",
"458115/gcode/Galaxy_Watch_40mm__v6.gcod... | Creative Commons — Attribution | https://www.printables.com/model/458115 | gcodes_0026.tar | |
436523 | Jeep Duck V2 | <p>For version 3 with articulated Duck Nutz visit my Cults3D profile! :) Link in bio!</p><figure class="image image-style-align-left"><img src="https://media.printables.com/media/prints/436523/rich_content/ecb95493-f444-4c4c-9ff5-f76dc0e3c27f/videotogi.gif#%7B%22uuid%22%3A%22086f0726-2a47-4776-9d24-38c53f2b186c%22%2C%2... | [
"car",
"truck",
"tires",
"jeep",
"duck",
"jeepwrangler",
"jeeprubicon",
"hotwheels",
"offroad",
"nosupports",
"rubberducky",
"mallard",
"offroadtires",
"jeepgladiator",
"quack",
"carguy",
"jeepduck",
"duckduckjeep"
] | Hobby & Makers > Automotive | [
"436523/images/img_8109.jpg",
"436523/images/img_2361.jpg",
"436523/images/img_8110.jpg",
"436523/images/img_2359.jpg"
] | [
"436523/gcode/JeepDuckV2__v0.gcode",
"436523/gcode/JeepDuckV2__v1.gcode",
"436523/gcode/JeepDuckV2__v2.gcode",
"436523/gcode/JeepDuckV2__v3.gcode",
"436523/gcode/JeepDuckV2__v4.gcode",
"436523/gcode/JeepDuckV2__v5.gcode",
"436523/gcode/JeepDuckV2__v6.gcode",
"436523/gcode/JeepDuckV2__v7.gcode",
"436... | Creative Commons — Attribution | https://www.printables.com/model/436523 | gcodes_0026.tar |
426678 | Sunlu S2 10mm Bowden Adapter/Wedge | <p>Sunlu wedge/filament guide/bowden adapter for the S2 drier. Keeps filament at a natural unspooling angle for less resistance and in a better location than the factory hole. Threaded for 10mm fitting. Wedge allows humidity to escape. Design works to route bowden tube either up or down from dri... | [
"filament",
"filamentdryer",
"bowdenadapter",
"sunlu",
"sunlus2",
"bowdentubeguide",
"sunlufilamentdryer",
"10mmbowden"
] | 3D Printers > Other Printer Parts & Upgrades | [
"426678/images/sunlu-s2.jpg"
] | [
"426678/gcode/Sunlu S2 with 10mm Fitting__v0.gcode",
"426678/gcode/Sunlu S2 with 10mm Fitting__v1.gcode",
"426678/gcode/Sunlu S2 with 10mm Fitting__v2.gcode",
"426678/gcode/Sunlu S2 with 10mm Fitting__v3.gcode",
"426678/gcode/Sunlu S2 with 10mm Fitting__v4.gcode",
"426678/gcode/Sunlu S2 with 10mm Fitting_... | Creative Commons — Attribution | https://www.printables.com/model/426678 | gcodes_0026.tar |
425810 | Owl Keychain | <p>To complete the key chain you need a metal ring for greater resistance, it can be from paper clips.</p> | [
"gadget",
"keychain",
"key",
"owl"
] | Gadgets > Other Gadgets | [
"425810/images/img_20230317_102004.jpg",
"425810/images/img_20230317_0117121.jpg"
] | [
"425810/gcode/owl-keychain__v0.gcode",
"425810/gcode/owl-keychain__v1.gcode",
"425810/gcode/owl-keychain__v2.gcode",
"425810/gcode/owl-keychain__v3.gcode",
"425810/gcode/owl-keychain__v4.gcode",
"425810/gcode/owl-keychain__v5.gcode",
"425810/gcode/owl-keychain__v6.gcode",
"425810/gcode/owl-keychain__v... | Creative Commons — Public Domain | https://www.printables.com/model/425810 | gcodes_0026.tar |
365945 | VORON 2020 Aluminum Profile Cable Clip | <p>Tag me if you printed~~~!!! Twitter <a href="https://twitter.com/YuTR0N"><i>https://twitter.com/YuTR0N</i></a></p> | [
"cablemanagement",
"2020extrusion",
"aluminumextrusion",
"cableclip",
"vorondesign",
"voron24"
] | 3D Printers > Voron Parts & Upgrades | [
"365945/images/voron-clip.jpg",
"365945/images/img_4561.jpg"
] | [
"365945/gcode/VORON Cable Clip 2020 profile__v0.gcode",
"365945/gcode/VORON Cable Clip 2020 profile__v1.gcode",
"365945/gcode/VORON Cable Clip 2020 profile__v2.gcode",
"365945/gcode/VORON Cable Clip 2020 profile__v3.gcode",
"365945/gcode/VORON Cable Clip 2020 profile__v4.gcode",
"365945/gcode/VORON ... | GNU General Public License v2.0 | https://www.printables.com/model/365945 | gcodes_0026.tar |
365538 | Honeycomb Storage wall Small tray | <p>New, NEW Screw Wall! Check it out, its much stronger than the Honeycomb wall. <a href="https://www.printables.com/model/544779-screw-wall">https://www.printables.com/model/544779-screw-wall</a></p><figure class="media"><oembed url="https://youtu.be/OImDS4lT7Kc"></oembed></figure><p> </p><p>You will need some su... | [
"aquanet",
"squeezebottle"
] | Hobby & Makers > Organizers | [
"365538/images/img-0748.jpg",
"365538/images/img-0747.jpg",
"365538/images/img-0746.jpg",
"365538/images/screenshot-2023-01-10-143438.jpg"
] | [
"365538/gcode/Honeycomb Wall Squirt bottle2__v0.gcode",
"365538/gcode/Honeycomb Wall Squirt bottle2__v1.gcode",
"365538/gcode/Honeycomb Wall Squirt bottle2__v2.gcode",
"365538/gcode/Honeycomb Wall Squirt bottle2__v3.gcode",
"365538/gcode/Honeycomb Wall Squirt bottle2__v4.gcode",
"365538/gcode/Honeycomb Wa... | Creative Commons — Attribution | https://www.printables.com/model/365538 | gcodes_0026.tar |
356260 | Sunlu S2 Bowden Adapter | <p>Add a Bowden tube to your Sunlu FilaDryer S2 using this improvement wedge and a M10 Pneumatic Fitting.</p><p>This remix of RENOxDECEPTION's "Sunlu FilaDryer S2 Improvement Wedge W/M10 Thread + PTFE Tube" simply adds a few fillets to soften the edge of the print.</p><p>Category: 3D Printer Accessories</p> | [
"bowden",
"thingiverse",
"pneumaticfitting"
] | 3D Printers > Accessories | [
"356260/images/large_display_5c48cd09-7712-4338-b416-4e68bc3a71f4_356260.jpg"
] | [
"356260/gcode/Sunlu_S2_Bowden_Adapter__v0.gcode",
"356260/gcode/Sunlu_S2_Bowden_Adapter__v1.gcode",
"356260/gcode/Sunlu_S2_Bowden_Adapter__v2.gcode",
"356260/gcode/Sunlu_S2_Bowden_Adapter__v3.gcode",
"356260/gcode/Sunlu_S2_Bowden_Adapter__v4.gcode",
"356260/gcode/Sunlu_S2_Bowden_Adapter__v5.gcode",
"356... | Creative Commons — Attribution | https://www.printables.com/model/356260 | gcodes_0026.tar |
354985 | Milwaukee M12 3 battery holder | <p>Please drop a like if you want to see more of this kind of stuff:). I remixed this model with different tolerances to make sure the batteries stayed on the wall above my busy work bench and vibrations from the tools. 3 battery Holder for Milwaukee M12 battery. </p><p>Printed in: PETG<br>Supports:<br>No<br>Resol... | [
"milwaukee",
"m12",
"milwaukeem12",
"milwaukeebattery"
] | Hobby & Makers > Tools | [
"354985/images/m12-battery-holder.jpg"
] | [
"354985/gcode/Milwaukee_M12_3_Battery_Holder__v0.gcode",
"354985/gcode/Milwaukee_M12_3_Battery_Holder__v1.gcode",
"354985/gcode/Milwaukee_M12_3_Battery_Holder__v2.gcode",
"354985/gcode/Milwaukee_M12_3_Battery_Holder__v3.gcode",
"354985/gcode/Milwaukee_M12_3_Battery_Holder__v4.gcode",
"354985/gcode/Milwauk... | Creative Commons — Attribution | https://www.printables.com/model/354985 | gcodes_0026.tar |
313118 | Improved Spool Wheel (print without support) for RMU inspired MMU2S Buffer | <p>I really appreciate <a href="https://www.printables.com/de/social/86004-manzn">Manzn</a>'s awesome work on the RMU inspired <a href="https://www.printables.com/de/model/77054-mmu2s-buffer-inspired-by-rmu-buffer">MMU2S Buffer</a>. Unfortunately a clean print of their supplied spool wheels is not possible without usin... | [
"spool",
"mmu",
"wheel",
"buffer",
"mk3s",
"mmu2s",
"filamentbuffer",
"rmu"
] | 3D Printers > Prusa Parts & Upgrades | [
"313118/images/img_0917.jpg",
"313118/images/slicededit.jpg",
"313118/images/makesedit.jpg",
"313118/images/improvedspoolwheel.jpg"
] | [
"313118/gcode/ImprovedSpoolWheel__v0.gcode",
"313118/gcode/ImprovedSpoolWheel__v1.gcode",
"313118/gcode/ImprovedSpoolWheel__v2.gcode",
"313118/gcode/ImprovedSpoolWheel__v3.gcode",
"313118/gcode/ImprovedSpoolWheel__v4.gcode",
"313118/gcode/ImprovedSpoolWheel__v5.gcode",
"313118/gcode/ImprovedSpoolWheel__... | GNU General Public License v2.0 | https://www.printables.com/model/313118 | gcodes_0026.tar |
285435 | Goomba cookie cutter | <p>Cookie cutter, Goomba:</p><ul><li>No supports</li></ul><p> </p> | [
"mario",
"cookiecutter",
"goomba"
] | Household > Kitchen | [
"285435/images/goomba_cookie_cutter.jpg",
"285435/images/goomba_cookie.jpg"
] | [
"285435/gcode/goomba__v0.gcode",
"285435/gcode/goomba__v1.gcode",
"285435/gcode/goomba__v2.gcode",
"285435/gcode/goomba__v3.gcode",
"285435/gcode/goomba__v4.gcode",
"285435/gcode/goomba__v5.gcode",
"285435/gcode/goomba__v6.gcode",
"285435/gcode/goomba__v7.gcode",
"285435/gcode/goomba__v8.gcode",
"... | GNU General Public License v3.0 | https://www.printables.com/model/285435 | gcodes_0027.tar |
254022 | Ender 3 S1 Extruder Arrow | <p>Ender 3 S1 Extruder Arrow, Print in a bright/different colour to black so its easy seen.</p><p>I printed 0.2 layer height with Cura 5, added a chamfer to help push it on. Its quite a snug/tight fit but I have tried it on both my Ender 3 S1 printers and works a treat.</p> | [
"extruder",
"creality",
"ender",
"3",
"arrow",
"s1"
] | 3D Printers > Creality Parts & Upgrades | [
"254022/images/s1-extruder-arrow.jpg"
] | [
"254022/gcode/S1 Extruder Arrow__v0.gcode",
"254022/gcode/S1 Extruder Arrow__v1.gcode",
"254022/gcode/S1 Extruder Arrow__v2.gcode",
"254022/gcode/S1 Extruder Arrow__v3.gcode",
"254022/gcode/S1 Extruder Arrow__v4.gcode",
"254022/gcode/S1 Extruder Arrow__v5.gcode",
"254022/gcode/S1 Extruder Arrow__v6.gcod... | Creative Commons — Attribution | https://www.printables.com/model/254022 | gcodes_0027.tar |
249010 | Small 5-hole Ocarina for kids |
<p>This is a 5-hole ocarina that ranges relatively well from C5 to D6. Refer to the chart to see how far it deviates from the ideal frequency at each note compared to other 3D printed ocarinas.</p>
<p>Its small size is suitable for tiny hands learning music for the first time (though big enough for adults as well!).... | [
"music",
"zelda",
"children",
"kids",
"forkids",
"ocarina",
"thingiverse",
"legendofzelda",
"musicalinstrument",
"ocarinaoftime",
"woodwind",
"4holeocarina"
] | Hobby & Makers > Music | [
"249010/images/59daa0c73aa690a8ebebcf668387a609_display_large_24.jpg",
"249010/images/c5tod6_chart_display_large_249010.jpg",
"249010/images/img_0159_display_large_249010.jpg",
"249010/images/ocarina5hole_display_large_249010.jpg"
] | [
"249010/gcode/Ocarina5Hole__v0.gcode",
"249010/gcode/Ocarina5Hole__v1.gcode",
"249010/gcode/Ocarina5Hole__v2.gcode",
"249010/gcode/Ocarina5Hole__v3.gcode",
"249010/gcode/Ocarina5Hole__v4.gcode",
"249010/gcode/Ocarina5Hole__v5.gcode",
"249010/gcode/Ocarina5Hole__v6.gcode",
"249010/gcode/Ocarina5Hole__v... | Creative Commons — Attribution | https://www.printables.com/model/249010 | gcodes_0027.tar |
221420 | Dachshund Bookmark | <p>Bookmark for the mother-in-law, commemorating her dog.</p>
<p>Flexible, seems strong enough for regular use but not tested yet.</p>
<h3>Print Settings</h3>
<p><strong>Printer:</strong></p>
<p>Ender 3 Pro</p>
<p class="detail-setting rafts"><strong>Rafts: </strong>
<div><p>No</p></div>
<p><strong>Supports:</strong></... | [
"dog",
"bookmark",
"dachshund",
"thingiverse"
] | Art & Design > 2D Plates & Logos | [
"221420/images/chibobookmark.jpg"
] | [
"221420/gcode/ChiboBookmark__v0.gcode",
"221420/gcode/ChiboBookmark__v1.gcode",
"221420/gcode/ChiboBookmark__v2.gcode",
"221420/gcode/ChiboBookmark__v3.gcode",
"221420/gcode/ChiboBookmark__v4.gcode",
"221420/gcode/ChiboBookmark__v5.gcode",
"221420/gcode/ChiboBookmark__v6.gcode",
"221420/gcode/ChiboBoo... | Creative Commons — Attribution | https://www.printables.com/model/221420 | gcodes_0027.tar |
202650 | Skadis small tweezer holder | [] | Hobby & Makers > Organizers | [
"202650/images/img_2908.jpg"
] | [
"202650/gcode/Tweezer holder 4__v0.gcode",
"202650/gcode/Tweezer holder 4__v1.gcode",
"202650/gcode/Tweezer holder 4__v2.gcode",
"202650/gcode/Tweezer holder 4__v3.gcode",
"202650/gcode/Tweezer holder 4__v4.gcode",
"202650/gcode/Tweezer holder 4__v5.gcode",
"202650/gcode/Tweezer holder 4__v6.gcode",
"... | Creative Commons — Attribution | https://www.printables.com/model/202650 | gcodes_0027.tar | |
200734 | Mother's Day Sculpture | <p>Perfect for Mother's Day. Modified original by shrinking bottom plate, printed in two colors. </p><p>Add filament / color change on Layer 22.</p><p>Material: PETG</p><p>Infill: 15% Grid</p><p>Remix:</p><p>https://www.thingiverse.com/thing:1541512</p> | [
"gift",
"child",
"mother",
"mothersday",
"mothersdaygift",
"mothersdaypresent"
] | Art & Design > Sculptures | [
"200734/images/img_0496.jpg"
] | [
"200734/gcode/Mothers_Day_Shorter_Plate__v0.gcode",
"200734/gcode/Mothers_Day_Shorter_Plate__v1.gcode",
"200734/gcode/Mothers_Day_Shorter_Plate__v2.gcode",
"200734/gcode/Mothers_Day_Shorter_Plate__v3.gcode",
"200734/gcode/Mothers_Day_Shorter_Plate__v4.gcode",
"200734/gcode/Mothers_Day_Shorter_Plate__v5.gc... | Creative Commons — Attribution | https://www.printables.com/model/200734 | gcodes_0027.tar |
187520 | Atlas Support Pillar |
<p>I really liked the Atlas pillar model by boris3dstudio, but the ends of his pillar weren't flat so it didn't slice nicely. I cut the ends to be flat and rotated the model upright.</p>
<p>I printed with tree supports in Cura to support the top of the pillar but not have the supports leave marks on the model.</p>
... | [
"thingiverse"
] | Art & Design > Sculptures | [
"187520/images/large_display_index_187520.jpg",
"187520/images/large_display_atlas_pillar_level_187520.jpg"
] | [
"187520/gcode/Atlas_pillar_level__v0.gcode",
"187520/gcode/Atlas_pillar_level__v1.gcode",
"187520/gcode/Atlas_pillar_level__v2.gcode",
"187520/gcode/Atlas_pillar_level__v3.gcode",
"187520/gcode/Atlas_pillar_level__v4.gcode",
"187520/gcode/Atlas_pillar_level__v5.gcode",
"187520/gcode/Atlas_pillar_level__... | Creative Commons — Attribution | https://www.printables.com/model/187520 | gcodes_0027.tar |
161241 | Plant support | <p>Plant support for supporting my tomatoe plants.</p>
<h3>Print Settings</h3>
<p><strong>Rafts:</strong></p>
<p>No</p>
<p class="detail-setting supports"><strong>Supports: </strong>
<div><p>No</p></div>
<p><strong>Filament:</strong>
PETG
Green</p>
</p>
Category: Outdoor & Garden | [
"plant",
"support",
"garden",
"thingiverse"
] | Household > Outdoor & Garden | [
"161241/images/large_display_plant_support_161241.jpg",
"161241/images/large_display_plantsupport02_161241.jpg",
"161241/images/large_display_plantsupport01_161241.jpg"
] | [
"161241/gcode/Plant_support__v0.gcode",
"161241/gcode/Plant_support__v1.gcode",
"161241/gcode/Plant_support__v2.gcode",
"161241/gcode/Plant_support__v3.gcode",
"161241/gcode/Plant_support__v4.gcode",
"161241/gcode/Plant_support__v5.gcode",
"161241/gcode/Plant_support__v6.gcode",
"161241/gcode/Plant_su... | Creative Commons — Attribution | https://www.printables.com/model/161241 | gcodes_0027.tar |
147206 | Gecko Keychain | <p>Cool Gecko Keychain found on thingiverse</p> | [
"keychains",
"gecko"
] | World & Scans > Animals | [
"147206/images/2022-02-05-200322000.jpg"
] | [
"147206/gcode/Gecko_Keychain__v0.gcode",
"147206/gcode/Gecko_Keychain__v1.gcode",
"147206/gcode/Gecko_Keychain__v2.gcode",
"147206/gcode/Gecko_Keychain__v4.gcode",
"147206/gcode/Gecko_Keychain__v5.gcode",
"147206/gcode/Gecko_Keychain__v6.gcode",
"147206/gcode/Gecko_Keychain__v7.gcode",
"147206/gcode/G... | Creative Commons — Attribution | https://www.printables.com/model/147206 | gcodes_0027.tar |
136666 | Prusa Mini HeatBreak Fan Noise Reducer | <p>The air coming out of the heatreak fan is causing a lot of noise in the heatsink blocks. Thanks to this fan cover, the air is evacuated from a single point and reduces the noise generated by the fan by 50%+. You will feel the difference when you apply it. </p><p>All you need are 2 x 10mm M3 screws. </p><p>... | [
"mini",
"prusamini",
"noisereduction",
"noisecancelling"
] | 3D Printers > Prusa Parts & Upgrades | [
"136666/images/fe987dd1-ed9a-4317-9604-e3ac078fca5d.jpg",
"136666/images/0e8408ad-0dca-4051-b3d6-8187c3f9b9d6.jpg",
"136666/images/f4b96011-fca3-4cec-97e2-b0733f85965b.jpg"
] | [
"136666/gcode/fan cover__v0.gcode",
"136666/gcode/fan cover__v1.gcode",
"136666/gcode/fan cover__v2.gcode",
"136666/gcode/fan cover__v3.gcode",
"136666/gcode/fan cover__v4.gcode",
"136666/gcode/fan cover__v5.gcode",
"136666/gcode/fan cover__v6.gcode",
"136666/gcode/fan cover__v7.gcode",
"136666/gcod... | Creative Commons — Public Domain | https://www.printables.com/model/136666 | gcodes_0027.tar |
133612 | Simple ring | [
"ring",
"simple"
] | Art & Design > Other Art & Designs | [
"133612/images/fusion360_znw1w6vjnr.jpg",
"133612/images/fusion360_0zrkyfrocy.jpg",
"133612/images/fusion360_qif9nnaywi.jpg"
] | [
"133612/gcode/ring__v0.gcode",
"133612/gcode/ring__v1.gcode",
"133612/gcode/ring__v2.gcode",
"133612/gcode/ring__v3.gcode",
"133612/gcode/ring__v4.gcode",
"133612/gcode/ring__v5.gcode",
"133612/gcode/ring__v6.gcode",
"133612/gcode/ring__v7.gcode",
"133612/gcode/ring__v8.gcode",
"133612/gcode/ring_... | Creative Commons — Public Domain | https://www.printables.com/model/133612 | gcodes_0027.tar | |
113332 | FDM Printable Elegoo Mars, Mars 2 & Mars 3 Build Plate Angled Holder | <p>Remix of PSDesigns Elegoo Mars, Mars 2 & Mars 3 Build Plate Angled Holder with a flat base making easily printable on FDM printers.</p><p>Simply hook your plate onto the build plate body to recover precious SLA resin.</p><p>Please always be careful & wear protective equipment when working with SLA resins.</p... | [
"elegoomars",
"elegoo",
"elegoomars2pro",
"elegoomarspro",
"elegoomars2"
] | 3D Printers > Other Printer Parts & Upgrades | [
"113332/images/screenshot-2022-01-05-at-140015.jpg",
"113332/images/screenshot-2022-01-05-at-135837.jpg"
] | [
"113332/gcode/Elegoo_Mars_PlateHolder_FDM__v0.gcode",
"113332/gcode/Elegoo_Mars_PlateHolder_FDM__v1.gcode",
"113332/gcode/Elegoo_Mars_PlateHolder_FDM__v2.gcode",
"113332/gcode/Elegoo_Mars_PlateHolder_FDM__v3.gcode",
"113332/gcode/Elegoo_Mars_PlateHolder_FDM__v4.gcode",
"113332/gcode/Elegoo_Mars_PlateHolde... | Creative Commons — Attribution | https://www.printables.com/model/113332 | gcodes_0027.tar |
110935 | small box with lid | <p>this is just a small box with a lid made in fusion 360.</p><p>It is great for storing small thing like sd cards or usb sticks.</p><p> </p><p>Made by Fabian in fusion 360 and printed with fiberlogy pla.</p><p> </p><p> </p><p> </p><p> </p> | [
"storagebox",
"smallbox"
] | Hobby & Makers > Organizers | [
"110935/images/16411373667584868871220661501200.jpg",
"110935/images/16411373946684537045504359590358.jpg",
"110935/images/16411374156813281097936706707290.jpg"
] | [
"110935/gcode/Box_with_lid__v0.gcode",
"110935/gcode/Box_with_lid__v1.gcode",
"110935/gcode/Box_with_lid__v2.gcode",
"110935/gcode/Box_with_lid__v3.gcode",
"110935/gcode/Box_with_lid__v4.gcode",
"110935/gcode/Box_with_lid__v5.gcode",
"110935/gcode/Box_with_lid__v6.gcode",
"110935/gcode/Box_with_lid__v... | Creative Commons — Public Domain | https://www.printables.com/model/110935 | gcodes_0027.tar |
105998 | ROUTER ATTACHMENT FOR DREMEL | <p>router attachment for dremel</p> | [
"router",
"dremel",
"dremelaccessories",
"dremelattachment",
"routerbits",
"dremel3000",
"dremelaccesories"
] | Hobby & Makers > Tools | [
"105998/images/img-2522.jpg"
] | [
"105998/gcode/router-attachment__v0.gcode",
"105998/gcode/router-attachment__v1.gcode",
"105998/gcode/router-attachment__v2.gcode",
"105998/gcode/router-attachment__v3.gcode",
"105998/gcode/router-attachment__v4.gcode",
"105998/gcode/router-attachment__v5.gcode",
"105998/gcode/router-attachment__v6.gcod... | Creative Commons — Public Domain | https://www.printables.com/model/105998 | gcodes_0027.tar |
105716 | Wall mount spool holder | <p>Wall mount spool holder for 1 kg spool.</p><p>One screw only, works really well.</p><p>Printed in PLA 0.3mm, no support.</p><p>If you print it please post a make to give me feedback. Thanks</p><p>Update: Scale fixed in v2</p> | [
"spool",
"mount",
"spoolholder",
"filamentspoolholder",
"spoolmount",
"filamentspool"
] | 3D Printers > Accessories | [
"105716/images/3f84e56a-18c8-48c6-9d61-65f80e8fa399.jpg"
] | [
"105716/gcode/Spool_Holder_Wall_Mount_1kg v2__v0.gcode",
"105716/gcode/Spool_Holder_Wall_Mount_1kg v2__v1.gcode",
"105716/gcode/Spool_Holder_Wall_Mount_1kg v2__v2.gcode",
"105716/gcode/Spool_Holder_Wall_Mount_1kg v2__v3.gcode",
"105716/gcode/Spool_Holder_Wall_Mount_1kg v2__v4.gcode",
"105716/gcode/Spool_H... | GNU General Public License v2.0 | https://www.printables.com/model/105716 | gcodes_0027.tar |
104974 | A cup for toothbrush and toothpaste | [
"cup",
"toolholder",
"toothpaste",
"toothbrushholder",
"toothpasteholder"
] | Household > Bathroom | [
"104974/images/2a567e08-d192-4b7d-8a22-370c6257d4f7.jpg"
] | [
"104974/gcode/tooth__v0.gcode",
"104974/gcode/tooth__v1.gcode",
"104974/gcode/tooth__v2.gcode",
"104974/gcode/tooth__v3.gcode",
"104974/gcode/tooth__v4.gcode",
"104974/gcode/tooth__v5.gcode",
"104974/gcode/tooth__v6.gcode",
"104974/gcode/tooth__v7.gcode",
"104974/gcode/tooth__v8.gcode",
"104974/gc... | Creative Commons — Public Domain | https://www.printables.com/model/104974 | gcodes_0027.tar | |
104570 | Filament Spool Clip | <p>Print 100% infill PLA or PETG as many as you need.</p><p>after some time of use, you should change it for new one, for better grab to the spool.</p> | [
"filament",
"clip"
] | 3D Printers > Other Printer Parts & Upgrades | [
"104570/images/img_20200918_172158.jpg",
"104570/images/img_20200918_171944.jpg"
] | [
"104570/gcode/Filament clip W__v0.gcode",
"104570/gcode/Filament clip W__v1.gcode",
"104570/gcode/Filament clip W__v2.gcode",
"104570/gcode/Filament clip W__v3.gcode",
"104570/gcode/Filament clip W__v4.gcode",
"104570/gcode/Filament clip W__v5.gcode",
"104570/gcode/Filament clip W__v6.gcode",
"104570/... | Creative Commons — Public Domain | https://www.printables.com/model/104570 | gcodes_0027.tar |
94041 | DEER Wall Art / Decoration |
<p>This is a DEER to be used as a decoration for a wall or whatever you like.<br/>
if you have a creality 500 you can make it really big.<br/>
normally you do not need raft, but depends on your bed adhesion.<br/>
I have put also the gcode for creality both from CURA and S3D, the strange is that depending on the c... | [
"deer",
"art",
"fusion360",
"crealitycr10",
"thingiverse",
"homedecor",
"walldecoration"
] | Household > Other House Equipment | [
"94041/images/69e56178ff4d3ada7afc1c858eff87d1_display_large_94.jpg",
"94041/images/b6cb30999c197f61000e568e9ab8508c_display_large_94.jpg",
"94041/images/416166ba147b0609131c404e837708a9_display_large_94.jpg",
"94041/images/c3113b978833e255869e792da84045c0_display_large_9.jpg",
"94041/images/0fc1506ef36d32e... | [
"94041/gcode/alce__v0.gcode",
"94041/gcode/alce__v1.gcode",
"94041/gcode/alce__v2.gcode",
"94041/gcode/alce__v3.gcode",
"94041/gcode/alce__v4.gcode",
"94041/gcode/alce__v5.gcode",
"94041/gcode/alce__v6.gcode",
"94041/gcode/alce__v7.gcode",
"94041/gcode/alce__v8.gcode",
"94041/gcode/alce__v9.gcode"... | Creative Commons — Attribution | https://www.printables.com/model/94041 | gcodes_0027.tar |
81209 | Simple Extrusion Test Part |
<p>This is a simple extrusion test I mostly use to dial in my extrusion multiplier.<br/>
Instructions:</p>
<ul>
<li>Print WITH supports! (WHY? So that first layer inconsistencies don't ruin the results) </li>
<li>100% rectilinear infill</li>
<li>1 perimeter<br/>
I usually print them in 5% intervalls.<br/>
After pri... | [
"thingiverse"
] | 3D Printers > Test Models | [
"81209/images/82341a6c6f03e3af261a95ba81050c0a_display_large_81.jpg",
"81209/images/56642349ade79d9b32fa56daa2614947_display_large_81.jpg",
"81209/images/05d5bcebc0cdfa80b736761e59dcfebe_display_large_81.jpg"
] | [
"81209/gcode/extrusionTest__v0.gcode",
"81209/gcode/extrusionTest__v1.gcode",
"81209/gcode/extrusionTest__v2.gcode",
"81209/gcode/extrusionTest__v3.gcode",
"81209/gcode/extrusionTest__v4.gcode",
"81209/gcode/extrusionTest__v5.gcode",
"81209/gcode/extrusionTest__v6.gcode",
"81209/gcode/extrusionTest__v... | Creative Commons — Attribution | https://www.printables.com/model/81209 | gcodes_0027.tar |
66693 | Misumi Linear LMU8 Y-Axis Bearing Holder for Prusa MK3s/+ | <p>This is the remeshed Prusa Bear style y-axis bearing holder for Prusa MK3s/+. This would allowed you to replace the Misumi Linear Bearing LMU8 without buying the new bearing clips.</p><p>The only thing you have to change is the existing U-Bolts to at least M3x18. The nylon lock nut will be re-used.</p><p>This ... | [
"prusa",
"holder",
"mk3s",
"bear",
"bearing",
"linear",
"yaxis",
"yaxismod",
"misumi",
"lmu8"
] | 3D Printers > Prusa Parts & Upgrades | [
"66693/images/bearing-holder.jpg",
"66693/images/bearing-holder2.jpg",
"66693/images/img_5745.jpg",
"66693/images/img_5746.jpg"
] | [
"66693/gcode/y_bearing_holder__v0.gcode",
"66693/gcode/y_bearing_holder__v1.gcode",
"66693/gcode/y_bearing_holder__v2.gcode",
"66693/gcode/y_bearing_holder__v3.gcode",
"66693/gcode/y_bearing_holder__v4.gcode",
"66693/gcode/y_bearing_holder__v5.gcode",
"66693/gcode/y_bearing_holder__v6.gcode",
"66693/g... | GNU General Public License v3.0 | https://www.printables.com/model/66693 | gcodes_0027.tar |
64117 | Broom Holder | Wall Mount Clamp | <p>I cannot take credit for this design - all I have done is fix a <a href="https://www.thingiverse.com/thing:2031690">model found on Thingiverse</a> to make it printable. The file made by the original designer was corrupted and comprised of a non-manifold mesh.</p><p>Print the broom clamp in place. Once the print has ... | [
"kitchen",
"wall",
"holder",
"household",
"wallmount",
"home",
"cleaning",
"clamp",
"organization",
"house",
"bucket",
"wallmounted",
"broom",
"organize",
"wallholder",
"broomholder",
"broomstick",
"sweeper",
"mop",
"sweep",
"kitchenorganization",
"cleaningtools",
"homema... | Household > Kitchen | [
"64117/images/iso-view.jpg"
] | [
"64117/gcode/Broom_Clamp__v0.gcode",
"64117/gcode/Broom_Clamp__v1.gcode",
"64117/gcode/Broom_Clamp__v2.gcode",
"64117/gcode/Broom_Clamp__v3.gcode",
"64117/gcode/Broom_Clamp__v4.gcode",
"64117/gcode/Broom_Clamp__v5.gcode",
"64117/gcode/Broom_Clamp__v6.gcode",
"64117/gcode/Broom_Clamp__v7.gcode",
"641... | Creative Commons — Public Domain | https://www.printables.com/model/64117 | gcodes_0027.tar |
42136 | ID Card / Badgeholder - supportless | <p>This is a badge holder that does not require supports and fits right off the build plate.<br>You can stamp your companies logo inside for a multicolor print or just leave it open.</p><p>This requires pretty tight tolerances as the cards only have very little contact area with the supportless grooves.</p><blockquote>... | [
"office",
"card",
"supportless",
"printinplace",
"badge",
"tesla",
"thingiverse",
"badgeholder",
"idcard",
"idcardholder"
] | Household > Office | [
"42136/images/large_display_frontslide_42136.jpg",
"42136/images/large_display_whole_42136.jpg"
] | [
"42136/gcode/bodyraw__v0.gcode",
"42136/gcode/bodyraw__v1.gcode",
"42136/gcode/bodyraw__v2.gcode",
"42136/gcode/bodyraw__v3.gcode",
"42136/gcode/bodyraw__v4.gcode",
"42136/gcode/bodyraw__v5.gcode",
"42136/gcode/bodyraw__v6.gcode",
"42136/gcode/bodyraw__v7.gcode",
"42136/gcode/bodyraw__v8.gcode",
"... | Creative Commons — Attribution | https://www.printables.com/model/42136 | gcodes_0027.tar |
25512 | Prusa Mini Sheet Holder 4 - Printable on Mini | <p>I removed the middle section so that it only has 4 slots instead of 5 and that allows it to be printed on the Mini if you rotate it 45 degrees.</p>
| [] | 3D Printers > Accessories | [
"25512/images/screen-shot-2020-03-14-at-73542-pm.jpg"
] | [
"25512/gcode/prusa-mini-sheet-holder-4-fits__v0.gcode",
"25512/gcode/prusa-mini-sheet-holder-4-fits__v1.gcode",
"25512/gcode/prusa-mini-sheet-holder-4-fits__v2.gcode",
"25512/gcode/prusa-mini-sheet-holder-4-fits__v3.gcode",
"25512/gcode/prusa-mini-sheet-holder-4-fits__v5.gcode",
"25512/gcode/prusa-mini-sh... | Creative Commons — Public Domain | https://www.printables.com/model/25512 | gcodes_0027.tar |
3443 | Kablhalterung cable holder | <p>D: Kabelhalterung zum Anschrauben (2x max. M6) mit Kabelbinder Befestigung für mehrere Kabel.</p>
<p>E: Cable holder for screwing (2x max M6) with cable tie attachment for several cables.</p>
| [
"cable",
"computer",
"screw"
] | Hobby & Makers > Electronics | [
"3443/images/img_20190603_133518.jpg",
"3443/images/img_20190603_133531.jpg"
] | [
"3443/gcode/cabelholder__v0.gcode",
"3443/gcode/cabelholder__v1.gcode",
"3443/gcode/cabelholder__v2.gcode",
"3443/gcode/cabelholder__v3.gcode",
"3443/gcode/cabelholder__v4.gcode",
"3443/gcode/cabelholder__v5.gcode",
"3443/gcode/cabelholder__v6.gcode",
"3443/gcode/cabelholder__v7.gcode",
"3443/gcode/... | Creative Commons — Public Domain | https://www.printables.com/model/3443 | gcodes_0027.tar |
1362257 | Prusa Core One/+ Bowden Bend Remix | <p>Inspired by "<a href="https://www.printables.com/model/1340868-core-one-modified-bowden-bend-with-wider-radius">Core One modified bowden-bend with wider radius</a>" by @Petehagoras.</p><p><strong>RELEASE</strong></p><p>27/07/2025<br>New slightly lower version (-1mm).</p> | [] | 3D Printers > Prusa Parts & Upgrades | [
"1362257/images/img_5503.jpg",
"1362257/images/img_5515.jpg"
] | [
"1362257/gcode/PrusaCoreOne_BowdenBend__v0.gcode",
"1362257/gcode/PrusaCoreOne_BowdenBend__v1.gcode",
"1362257/gcode/PrusaCoreOne_BowdenBend__v2.gcode",
"1362257/gcode/PrusaCoreOne_BowdenBend__v3.gcode",
"1362257/gcode/PrusaCoreOne_BowdenBend__v4.gcode",
"1362257/gcode/PrusaCoreOne_BowdenBend__v5.gcode",
... | GNU General Public License v2.0 | https://www.printables.com/model/1362257 | gcodes_0027.tar |
1338925 | Prusa CORE One Nozzle Wiper | <h3>Printer</h3><p>Custom G-Code for the nozzle wiper:</p><pre><code class="language-gcode">;
; Wipe nozzle
;
G0 X82 Y-16 Z3 F8000
G0 Z1
G0 X40
G0 Y-13.5
G0 X82
G0 Y-10
G0 X76.8
G0 Y-16
G0 X71.5
G0 Y-10
G0 X66.2
G0 Y-16
G0 X61
G0 Y-10
G0 X56
G0 Y-16
G0 X50.8
G0 Y-10
G0 X45.5
G0 Y-16
G0 X40
G0 Y-10
G0 Z3
</code></pre><b... | [
"nozzle",
"wiper"
] | 3D Printers > Prusa Parts & Upgrades | [
"1338925/images/nozzle_wiper.jpg"
] | [
"1338925/gcode/nozzle_wiper__v0.gcode",
"1338925/gcode/nozzle_wiper__v1.gcode",
"1338925/gcode/nozzle_wiper__v2.gcode",
"1338925/gcode/nozzle_wiper__v3.gcode",
"1338925/gcode/nozzle_wiper__v4.gcode",
"1338925/gcode/nozzle_wiper__v5.gcode",
"1338925/gcode/nozzle_wiper__v6.gcode",
"1338925/gcode/nozzle_... | GNU General Public License v3.0 | https://www.printables.com/model/1338925 | gcodes_0027.tar |
1094459 | Donald Trump Bust | <p>Supports may be required.</p><p>if you liked this design: please support me on makerworld and download it here: <a href="https://makerworld.com/en/models/856095">https://makerworld.com/en/models/856095</a><br><br>i am redeeming points to get a new 3d printer</p> | [
"bust",
"trump",
"busts",
"trump2024"
] | Art & Design > Sculptures | [
"1094459/images/test.jpg"
] | [
"1094459/gcode/trump__v0.gcode",
"1094459/gcode/trump__v1.gcode",
"1094459/gcode/trump__v2.gcode",
"1094459/gcode/trump__v3.gcode",
"1094459/gcode/trump__v4.gcode",
"1094459/gcode/trump__v5.gcode",
"1094459/gcode/trump__v6.gcode",
"1094459/gcode/trump__v7.gcode",
"1094459/gcode/trump__v8.gcode",
"... | Creative Commons — Attribution | https://www.printables.com/model/1094459 | gcodes_0027.tar |
997075 | Mini Witch - Sculptember Model #7 | <p>This crafty crone requires no supports. MMU ready!</p><figure class="media"><oembed url="https://youtu.be/ie2Ro4l3048"></oembed></figure><p><a href="https://youtu.be/ie2Ro4l3048">https://youtu.be/ie2Ro4l3048</a></p><h3><br><br>Printing</h3><ul><li>Can be printed in both FDM and resin</li><li>No supports required</li... | [
"halloween",
"halloweendecoration",
"witch",
"scultpure",
"sculptember",
"crone"
] | Seasonal designs > Autumn & Halloween | [
"997075/images/small-thumbnail.jpg"
] | [
"997075/gcode/Witch__v0.gcode",
"997075/gcode/Witch__v1.gcode",
"997075/gcode/Witch__v2.gcode",
"997075/gcode/Witch__v3.gcode",
"997075/gcode/Witch__v4.gcode",
"997075/gcode/Witch__v5.gcode",
"997075/gcode/Witch__v6.gcode",
"997075/gcode/Witch__v7.gcode",
"997075/gcode/Witch__v8.gcode",
"997075/gc... | Creative Commons — Attribution | https://www.printables.com/model/997075 | gcodes_0027.tar |
892876 | Rattle-free/quiet Prusa MMU3 Idler | <p>Remixed the standard R4 version of the idler to remove rattling sound when idler moves.</p><p>Remix of the Ultimulti version here: https://www.printables.com/model/893656/<br><br>Print as oriented. This remix adds a .5mm bearing spacer to each wall of the bearing slots which sits against the innner bearing race to p... | [
"prusa",
"mmu",
"mk3",
"quiet",
"mk3s",
"silent",
"mmu2s",
"mmu2",
"bearing",
"idler",
"remix",
"remixed",
"mk4",
"rattle",
"loud",
"mmu3",
"noisy",
"mmu3s",
"mk4upgrade",
"idlerbearing"
] | 3D Printers > Prusa Parts & Upgrades | [
"892876/images/image.jpg"
] | [
"892876/gcode/mmu3-idler-R4_remix_rattle_free__v0.gcode",
"892876/gcode/mmu3-idler-R4_remix_rattle_free__v1.gcode",
"892876/gcode/mmu3-idler-R4_remix_rattle_free__v2.gcode",
"892876/gcode/mmu3-idler-R4_remix_rattle_free__v3.gcode",
"892876/gcode/mmu3-idler-R4_remix_rattle_free__v4.gcode",
"892876/gcode/mm... | GNU General Public License v2.0 | https://www.printables.com/model/892876 | gcodes_0027.tar |
890270 | Electrical Diagrams Template | <p>Introducing a new and improved template for drawing electrical schematics. With the help of the template, you will be able to draw cross-sectional electrical diagrams. It is suitable for beginners and students.</p><p>The template is designed so that most of the parts can be drawn.</p><p>I printed the template on PLA... | [
"3d",
"model",
"school",
"gadget",
"electronics",
"3dprinter",
"student",
"quality",
"template"
] | Hobby & Makers > Electronics | [
"890270/images/20240524_151847.jpg",
"890270/images/20240524_152000.jpg"
] | [
"890270/gcode/Electrical Diagrams Template__v0.gcode",
"890270/gcode/Electrical Diagrams Template__v1.gcode",
"890270/gcode/Electrical Diagrams Template__v2.gcode",
"890270/gcode/Electrical Diagrams Template__v3.gcode",
"890270/gcode/Electrical Diagrams Template__v4.gcode",
"890270/gcode/Electrical Diagra... | Creative Commons — Attribution | https://www.printables.com/model/890270 | gcodes_0027.tar |
793061 | Cat Holding a Heart Keychain | <p>Show your love with the “Cat Holding a Heart Keychain” – a cute accessory that features an adorable cat holding a small heart. It’s the ultimate gift for those who adore cats and a design that’s sure to melt hearts.</p><p><strong>Features:</strong></p><ul><li><strong>Quick to Print:</strong> Ideal for those who... | [
"cat",
"animal",
"cute",
"gift",
"fun",
"easy",
"accessory",
"keychain",
"love",
"heart",
"simple",
"adorable",
"charm",
"romance"
] | Art & Design > Other Art & Designs | [
"793061/images/img_0328.jpg"
] | [
"793061/gcode/Cat Heart Keychain__v0.gcode",
"793061/gcode/Cat Heart Keychain__v1.gcode",
"793061/gcode/Cat Heart Keychain__v2.gcode",
"793061/gcode/Cat Heart Keychain__v3.gcode",
"793061/gcode/Cat Heart Keychain__v4.gcode",
"793061/gcode/Cat Heart Keychain__v5.gcode",
"793061/gcode/Cat Heart Keychain__... | Creative Commons — Attribution | https://www.printables.com/model/793061 | gcodes_0027.tar |
767206 | Kitchen Utensil Holder | <p>Kitchen Utensil Holder</p> | [
"kitchen",
"cooking",
"holder",
"spoon",
"utensil",
"cookingutensil"
] | Household > Kitchen | [
"767206/images/a1.jpg",
"767206/images/a2.jpg",
"767206/images/a3.jpg",
"767206/images/a4.jpg"
] | [
"767206/gcode/PortaMestolo__v0.gcode",
"767206/gcode/PortaMestolo__v1.gcode",
"767206/gcode/PortaMestolo__v2.gcode",
"767206/gcode/PortaMestolo__v3.gcode",
"767206/gcode/PortaMestolo__v4.gcode",
"767206/gcode/PortaMestolo__v5.gcode",
"767206/gcode/PortaMestolo__v6.gcode",
"767206/gcode/PortaMestolo__v... | Creative Commons — Public Domain | https://www.printables.com/model/767206 | gcodes_0027.tar |
705043 | Filament stopper for the Ender 3 v3 SE spool holder | <p>At first I noticed that the Creality filament was falling off the holder during test printing. After that I saw that during fast printing the spool was also moving a bit and decided to make such a stopper.</p><p>To keep it tighter and less spinning, I recommend using a bit of tape on the holder underneath.</p><p>Sho... | [
"upgrade",
"spoolholder",
"fillament",
"ender3v3se"
] | 3D Printers > Creality Parts & Upgrades | [
"705043/images/20240103_003405.jpg",
"705043/images/20240103_003944.jpg"
] | [
"705043/gcode/Filament stopper__v0.gcode",
"705043/gcode/Filament stopper__v1.gcode",
"705043/gcode/Filament stopper__v2.gcode",
"705043/gcode/Filament stopper__v3.gcode",
"705043/gcode/Filament stopper__v4.gcode",
"705043/gcode/Filament stopper__v5.gcode",
"705043/gcode/Filament stopper__v6.gcode",
"... | Creative Commons — Attribution | https://www.printables.com/model/705043 | gcodes_0027.tar |
586334 | poseable skeleton | [
"skull",
"print",
"cool",
"skeleton"
] | Art & Design > Sculptures | [
"586334/images/obraz_2023-09-18_175211446.jpg"
] | [
"586334/gcode/Fantabulous Migelo-Albar__v0.gcode",
"586334/gcode/Fantabulous Migelo-Albar__v1.gcode",
"586334/gcode/Fantabulous Migelo-Albar__v2.gcode",
"586334/gcode/Fantabulous Migelo-Albar__v3.gcode",
"586334/gcode/Fantabulous Migelo-Albar__v4.gcode",
"586334/gcode/Fantabulous Migelo-Albar__v5.gcode",
... | Creative Commons — Public Domain | https://www.printables.com/model/586334 | gcodes_0027.tar | |
545938 | MK4 - LoveBoard Cover | <p>The original Cover for the LoveBoard on the right side of the printhead does not fir very good and is only fastened with one screw.</p><p>Sometimes, wenn the Cover shows a cap to the side of the X-Cariagge, the test of the X-Axis fails because the Axis can not move completely to the right side.</p><p>I took away som... | [] | 3D Printers > Prusa Parts & Upgrades | [
"545938/images/cover.jpg"
] | [
"545938/gcode/LoveBoard Cover__v0.gcode",
"545938/gcode/LoveBoard Cover__v1.gcode",
"545938/gcode/LoveBoard Cover__v2.gcode",
"545938/gcode/LoveBoard Cover__v3.gcode",
"545938/gcode/LoveBoard Cover__v4.gcode",
"545938/gcode/LoveBoard Cover__v5.gcode",
"545938/gcode/LoveBoard Cover__v6.gcode",
"545938/... | GNU General Public License v2.0 | https://www.printables.com/model/545938 | gcodes_0027.tar |
512132 | Napkin holder | <p>A simple napkin holder with a hexagonal pattern that should fit most common sizes of napkins (max 16.5cm x 16.5cm).</p><p> </p><p><strong>Print settings</strong></p><p>0.2mm Layer height<br>2 Perimeters<br>3 Top/bottom layers<br>15% Infill - Grid<br>No supports<br><br><strong>Materials</strong></p><p>Prusament ... | [
"hex",
"napkin"
] | Household > Kitchen | [
"512132/images/20230624_103540.jpg",
"512132/images/20230624_103914.jpg"
] | [
"512132/gcode/NapkinHolder__v0.gcode",
"512132/gcode/NapkinHolder__v1.gcode",
"512132/gcode/NapkinHolder__v2.gcode",
"512132/gcode/NapkinHolder__v3.gcode",
"512132/gcode/NapkinHolder__v4.gcode",
"512132/gcode/NapkinHolder__v5.gcode",
"512132/gcode/NapkinHolder__v6.gcode",
"512132/gcode/NapkinHolder__v... | Creative Commons — Attribution | https://www.printables.com/model/512132 | gcodes_0027.tar |
469902 | Audi Keychain | <p>Audi car brand keychain, with a simple and easy design for a quick impression and low material cost. For daily use, it's better to modify the keychain scale to 70 or 80% to make it more comfortable and less bulky.</p> | [
"organizer",
"logo",
"holder",
"mini",
"ring",
"retro",
"silver",
"design",
"art",
"chain",
"car",
"gift",
"vintage",
"cool",
"accessory",
"fob",
"keychain",
"key",
"keyring",
"keys",
"emblem",
"collectible",
"automotive",
"craft",
"metal",
"symbol",
"automobile",... | Art & Design > 2D Plates & Logos | [
"469902/images/audi-keychain-1.jpg",
"469902/images/audi-keychain-2.jpg"
] | [
"469902/gcode/Audi Keychain__v0.gcode",
"469902/gcode/Audi Keychain__v1.gcode",
"469902/gcode/Audi Keychain__v2.gcode",
"469902/gcode/Audi Keychain__v3.gcode",
"469902/gcode/Audi Keychain__v4.gcode",
"469902/gcode/Audi Keychain__v5.gcode",
"469902/gcode/Audi Keychain__v6.gcode",
"469902/gcode/Audi Key... | Creative Commons — Attribution | https://www.printables.com/model/469902 | gcodes_0028.tar |
451369 | Cable hook - Easy cable management | <p>This is the easy solution for getting cables off the floor. All you need to do is to install a few of these hooks and insert the cables through the openings. Removing and inserting cables is quick and easy.</p><p>You can install this hook with a screw or double sided tape.</p> | [
"cablemanagement",
"cableholder"
] | Hobby & Makers > Organizers | [
"451369/images/img_20230413_165558.jpg",
"451369/images/img_20230413_163923.jpg",
"451369/images/img_20230413_154906.jpg",
"451369/images/img_20230413_154920.jpg",
"451369/images/img_20230413_164026.jpg",
"451369/images/img_20230413_154950.jpg"
] | [
"451369/gcode/cablehook__v0.gcode",
"451369/gcode/cablehook__v1.gcode",
"451369/gcode/cablehook__v2.gcode",
"451369/gcode/cablehook__v3.gcode",
"451369/gcode/cablehook__v4.gcode",
"451369/gcode/cablehook__v5.gcode",
"451369/gcode/cablehook__v6.gcode",
"451369/gcode/cablehook__v7.gcode",
"451369/gcod... | GNU General Public License v3.0 | https://www.printables.com/model/451369 | gcodes_0028.tar |
408609 | Prusa Mini retraction tower (PLA, PETG) | <p>1-6mm retraction tower that takes about 30 mins to print.<br>Feel free to customize the gcode and edit the <code>M104</code> command with your desired temperature.</p><p>Credits: <a href="https://github.com/kartchnb/AutoTowersGenerator">https://github.com/kartchnb/AutoTowersGenerator</a></p> | [
"retraction",
"retractiontest",
"retractiontower"
] | 3D Printers > Test Models | [
"408609/images/img_20230225_090758.jpg"
] | [
"408609/gcode/retraction_tower__v0.gcode",
"408609/gcode/retraction_tower__v1.gcode",
"408609/gcode/retraction_tower__v2.gcode",
"408609/gcode/retraction_tower__v3.gcode",
"408609/gcode/retraction_tower__v4.gcode",
"408609/gcode/retraction_tower__v5.gcode",
"408609/gcode/retraction_tower__v6.gcode",
"... | GNU General Public License v3.0 | https://www.printables.com/model/408609 | gcodes_0028.tar |
399320 | radius gauge | <p>find the radius of curves by successive tests on the gauge as in the image below :</p><figure class="image image_resized" style="width:78.52%;"><img src="https://media.printables.com/media/prints/399320/rich_content/3d8ebebf-364e-4b7e-b45e-d83506fd62ea/whatsapp-image-2024-07-13-at-173626.jpeg#%7B%22uuid%22%3A%229f36... | [
"tool",
"tools",
"gauge",
"ruler",
"handtools",
"radius",
"radiusgauge",
"curves",
"curved",
"diameter",
"curve",
"mesuringtool",
"radiustool",
"gauges",
"diametermeasure",
"mesuring",
"mesure",
"radiusgauges",
"diametergauge"
] | Hobby & Makers > Tools | [
"399320/images/radius_gauge_v3_vf.jpg",
"399320/images/whatsapp-image-2024-07-13-at-173626.jpg",
"399320/images/whatsapp-image-2024-07-13-at-173637.jpg",
"399320/images/whatsapp-image-2024-07-13-at-173632.jpg",
"399320/images/whatsapp-image-2024-07-13-at-173634.jpg"
] | [
"399320/gcode/radius_gauge_VF__v0.gcode",
"399320/gcode/radius_gauge_VF__v1.gcode",
"399320/gcode/radius_gauge_VF__v2.gcode",
"399320/gcode/radius_gauge_VF__v3.gcode",
"399320/gcode/radius_gauge_VF__v4.gcode",
"399320/gcode/radius_gauge_VF__v5.gcode",
"399320/gcode/radius_gauge_VF__v6.gcode",
"399320/... | Creative Commons — Attribution | https://www.printables.com/model/399320 | gcodes_0028.tar |
396802 | Dice | <p><strong>Dice</strong> (singular <strong>die</strong> or <strong>dice</strong>) are small, throwable objects with marked sides that can rest in multiple positions. They are used for generating random values.</p><figure class="media"><oembed url="https://www.youtube.com/watch?v=bKx-T3f14Fg"></oembed></figure> | [
"game",
"fun",
"boardgames",
"dice",
"die",
"play",
"square",
"dicebox",
"dicegame",
"dices"
] | Toys & Games > Board Games | [
"396802/images/1.jpg",
"396802/images/image.jpg",
"396802/images/2.jpg"
] | [
"396802/gcode/ProDice__v0.gcode",
"396802/gcode/ProDice__v1.gcode",
"396802/gcode/ProDice__v2.gcode",
"396802/gcode/ProDice__v3.gcode",
"396802/gcode/ProDice__v4.gcode",
"396802/gcode/ProDice__v5.gcode",
"396802/gcode/ProDice__v6.gcode",
"396802/gcode/ProDice__v7.gcode",
"396802/gcode/ProDice__v8.gc... | Creative Commons — Public Domain | https://www.printables.com/model/396802 | gcodes_0028.tar |
394782 | Cart coin | [] | Gadgets > Other Gadgets | [
"394782/images/tempimageufgkwb.jpg",
"394782/images/tempimagemgdvvm.jpg"
] | [
"394782/gcode/cart_coin__v0.gcode",
"394782/gcode/cart_coin__v1.gcode",
"394782/gcode/cart_coin__v2.gcode",
"394782/gcode/cart_coin__v3.gcode",
"394782/gcode/cart_coin__v4.gcode",
"394782/gcode/cart_coin__v5.gcode",
"394782/gcode/cart_coin__v6.gcode",
"394782/gcode/cart_coin__v7.gcode",
"394782/gcod... | Creative Commons — Public Domain | https://www.printables.com/model/394782 | gcodes_0028.tar | |
366085 | Ender 3 V2 Neo tool holder | <p>Ender 3 V2 neo tool holder remixed from Mattwall's design (https://www.thingiverse.com/thing:3877505)</p> | [
"tool",
"holder",
"ender3",
"ender3v2neo"
] | 3D Printers > Accessories | [
"366085/images/capture.jpg"
] | [
"366085/gcode/Tool_Holder_V2_Neo__v0.gcode",
"366085/gcode/Tool_Holder_V2_Neo__v1.gcode",
"366085/gcode/Tool_Holder_V2_Neo__v2.gcode",
"366085/gcode/Tool_Holder_V2_Neo__v3.gcode",
"366085/gcode/Tool_Holder_V2_Neo__v4.gcode",
"366085/gcode/Tool_Holder_V2_Neo__v5.gcode",
"366085/gcode/Tool_Holder_V2_Neo__... | Creative Commons — Attribution | https://www.printables.com/model/366085 | gcodes_0028.tar |
358984 | Rocket (Vase Mode) | [] | Toys & Games > Action Figures & Statues | [
"358984/images/124f35c1-aa01-493e-ba1b-581166e0ac57.jpg"
] | [
"358984/gcode/Rocket__v0.gcode",
"358984/gcode/Rocket__v1.gcode",
"358984/gcode/Rocket__v2.gcode",
"358984/gcode/Rocket__v3.gcode",
"358984/gcode/Rocket__v4.gcode",
"358984/gcode/Rocket__v5.gcode",
"358984/gcode/Rocket__v6.gcode",
"358984/gcode/Rocket__v7.gcode",
"358984/gcode/Rocket__v8.gcode",
"... | Creative Commons — Public Domain | https://www.printables.com/model/358984 | gcodes_0028.tar | |
358501 | Wera Kraftform Micro Stand | <p>Minimal space consuming stand for set of Wera Kraftform Micro screwdrivers.Almost any screwdriver from Kraftform Micro series should fit.</p><p>Model is ready for print, no need for rotating. No supports. I printed it with 0,2mm layer height. For best visibility of Wera logo on top, use only 1 perimeter on last laye... | [
"micro",
"handle",
"stand",
"wera",
"screwdriverhandle",
"kraftform"
] | Hobby & Makers > Tools | [
"358501/images/img_20230104_075635.jpg",
"358501/images/img_20230104_074703.jpg",
"358501/images/img_20230104_074949.jpg",
"358501/images/img_20230104_075147.jpg",
"358501/images/img_20230104_075100.jpg",
"358501/images/img_20230104_084931.jpg"
] | [
"358501/gcode/wera_micro_stand__v0.gcode",
"358501/gcode/wera_micro_stand__v1.gcode",
"358501/gcode/wera_micro_stand__v2.gcode",
"358501/gcode/wera_micro_stand__v3.gcode",
"358501/gcode/wera_micro_stand__v4.gcode",
"358501/gcode/wera_micro_stand__v5.gcode",
"358501/gcode/wera_micro_stand__v6.gcode",
"... | Creative Commons — Attribution | https://www.printables.com/model/358501 | gcodes_0028.tar |
349816 | Owl - fixed | <p>This cute little owl with a fixed bottom for better adhesion and easier printing.</p><p>The original has a very rough bottom which causes problems with the first layer on many printers. This is now fixed.</p><p>G-Code included</p> | [
"bird",
"owl",
"vogel",
"eule"
] | Art & Design > Sculptures | [
"349816/images/05b7fc8d-3616-4979-8ff5-5ba6cc3a8f9d.jpg",
"349816/images/c4e2e478-ec63-4d2d-ac79-722fa617145f.jpg",
"349816/images/69f4cab2-f368-4a72-b25a-677fbfa08ae7.jpg"
] | [
"349816/gcode/owl_Fixed__v0.gcode",
"349816/gcode/owl_Fixed__v1.gcode",
"349816/gcode/owl_Fixed__v2.gcode",
"349816/gcode/owl_Fixed__v3.gcode",
"349816/gcode/owl_Fixed__v4.gcode",
"349816/gcode/owl_Fixed__v5.gcode",
"349816/gcode/owl_Fixed__v6.gcode",
"349816/gcode/owl_Fixed__v7.gcode",
"349816/gcod... | Creative Commons — Public Domain | https://www.printables.com/model/349816 | gcodes_0028.tar |
333176 | Ender 3 S1 Cable Holder remixed | <p>print with supports, 10% or more infill. you can see the modifications I did in the attached picture.</p> | [
"ender",
"ender3s1"
] | 3D Printers > Creality Parts & Upgrades | [
"333176/images/ender-3-s1-cable-holder-v2.jpg"
] | [
"333176/gcode/Ender 3 S1 Cable Holder v2__v0.gcode",
"333176/gcode/Ender 3 S1 Cable Holder v2__v1.gcode",
"333176/gcode/Ender 3 S1 Cable Holder v2__v2.gcode",
"333176/gcode/Ender 3 S1 Cable Holder v2__v3.gcode",
"333176/gcode/Ender 3 S1 Cable Holder v2__v4.gcode",
"333176/gcode/Ender 3 S1 Cable Holder v2_... | Creative Commons — Attribution | https://www.printables.com/model/333176 | gcodes_0028.tar |
314289 | Steam Deck Carrying Case Insert (EU) | <p>Microsd card slot is simply too tight, even with proper calibration/tolerances. </p><p>Typical microsd card thickness is 0.7mm and the slot was exactly 0.7mm too. I have added 0.05mm to the slot width</p> | [] | Gadgets > Video Games | [
"314289/images/3d_printing_service_small_to_l_1667054326_87a86416_progressive.jpg"
] | [
"314289/gcode/Steam Deck Carrying Case Insert EU__v0.gcode",
"314289/gcode/Steam Deck Carrying Case Insert EU__v1.gcode",
"314289/gcode/Steam Deck Carrying Case Insert EU__v2.gcode",
"314289/gcode/Steam Deck Carrying Case Insert EU__v3.gcode",
"314289/gcode/Steam Deck Carrying Case Insert EU__v4.gcode",
"... | Creative Commons — Public Domain | https://www.printables.com/model/314289 | gcodes_0028.tar |
257657 | Large soccer goal | <p><br>Found this one on Thingiverse designed by user "Robo"<br>Link to his design : <br>https://www.thingiverse.com/thing:4889525</p><p>Had to scale it up 220% so it doesn't look small on the cacke. It barely fits on my print bed:) </p> | [
"soccer",
"goal"
] | Costumes & Accessories > Props | [
"257657/images/img_3616.jpg",
"257657/images/img_3615.jpg"
] | [
"257657/gcode/Soccer goal__v0.gcode",
"257657/gcode/Soccer goal__v1.gcode",
"257657/gcode/Soccer goal__v2.gcode",
"257657/gcode/Soccer goal__v3.gcode",
"257657/gcode/Soccer goal__v4.gcode",
"257657/gcode/Soccer goal__v5.gcode",
"257657/gcode/Soccer goal__v6.gcode",
"257657/gcode/Soccer goal__v7.gcode"... | Creative Commons — Attribution | https://www.printables.com/model/257657 | gcodes_0028.tar |
244485 | Circle | <p>Just an easy print</p> | [
"test",
"circle",
"easytoprint",
"easy",
"quick",
"3dmodel",
"testmodel",
"simple",
"make",
"testmodels",
"simpleshape"
] | 3D Printers > Test Models | [
"244485/images/circle.jpg"
] | [
"244485/gcode/Circle__v0.gcode",
"244485/gcode/Circle__v1.gcode",
"244485/gcode/Circle__v2.gcode",
"244485/gcode/Circle__v3.gcode",
"244485/gcode/Circle__v4.gcode",
"244485/gcode/Circle__v5.gcode",
"244485/gcode/Circle__v6.gcode",
"244485/gcode/Circle__v7.gcode",
"244485/gcode/Circle__v8.gcode",
"... | Creative Commons — Attribution | https://www.printables.com/model/244485 | gcodes_0028.tar |
236257 | iPhone Se/8 Case | <p>Print with backside down TPU at 120 or 200um layer height. The infill can vary depending on how flexible you want the case to be. Ex. 20% is very flexible and easy to insert, and 100% is much stiffer.</p><p>Overture TPU worked well. Print on a textured sheet or blue painter's tape for a nice grippy texture on the ba... | [
"case",
"flexible",
"tpu",
"iphone",
"iphone8",
"iphonese"
] | Gadgets > Portable Devices | [
"236257/images/volside.jpg",
"236257/images/back.jpg",
"236257/images/front.jpg"
] | [
"236257/gcode/iphonecase-rev3__v0.gcode",
"236257/gcode/iphonecase-rev3__v1.gcode",
"236257/gcode/iphonecase-rev3__v2.gcode",
"236257/gcode/iphonecase-rev3__v3.gcode",
"236257/gcode/iphonecase-rev3__v4.gcode",
"236257/gcode/iphonecase-rev3__v5.gcode",
"236257/gcode/iphonecase-rev3__v6.gcode",
"236257/... | Creative Commons — Attribution | https://www.printables.com/model/236257 | gcodes_0028.tar |
212985 | Print In Place V8-Engine |
<p>This is a print in place model, meaning there is no assembly required!</p>
<p><strong>See how it works: <a href="https://youtu.be/n4ovYJdgHNU">https://youtu.be/n4ovYJdgHNU</a></strong></p>
<p><strong>Please like the Thingiverse Thing, it helps alot! :)</strong></p>
<p>There is more info on the design in this vide... | [
"motor",
"car",
"engine",
"cool",
"thingiverse",
"v8engine"
] | Hobby & Makers > Other Ideas | [
"212985/images/large_display_thumbnail2_-_43_212985.jpg",
"212985/images/large_display_v82_212985.jpg",
"212985/images/large_display_v8_212985.jpg",
"212985/images/large_display_check_out_my_other_designs_212985.jpg",
"212985/images/large_display_v8_212985.jpg"
] | [
"212985/gcode/V8__v0.gcode",
"212985/gcode/V8__v1.gcode",
"212985/gcode/V8__v2.gcode",
"212985/gcode/V8__v3.gcode",
"212985/gcode/V8__v4.gcode",
"212985/gcode/V8__v5.gcode",
"212985/gcode/V8__v6.gcode",
"212985/gcode/V8__v7.gcode",
"212985/gcode/V8__v8.gcode",
"212985/gcode/V8__v9.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/212985 | gcodes_0028.tar |
212594 | 9mm Luger, 9x19mm | [
"cartridge",
"ammo",
"9mm",
"bullet",
"luger"
] | Sports & Outdoor > Other Sports | [
"212594/images/20220527_190151.jpg",
"212594/images/20220527_190231.jpg"
] | [
"212594/gcode/9mm luger_9x19mm__v0.gcode",
"212594/gcode/9mm luger_9x19mm__v1.gcode",
"212594/gcode/9mm luger_9x19mm__v2.gcode",
"212594/gcode/9mm luger_9x19mm__v3.gcode",
"212594/gcode/9mm luger_9x19mm__v4.gcode",
"212594/gcode/9mm luger_9x19mm__v5.gcode",
"212594/gcode/9mm luger_9x19mm__v6.gcode",
"... | Creative Commons — Attribution | https://www.printables.com/model/212594 | gcodes_0028.tar | |
196651 | cutting board holder | <p>Here is a cutting board holder.</p><p>No Support required.</p> | [
"kitchen",
"food",
"cutting"
] | Household > Kitchen | [
"196651/images/238557311_376316737463378_2878750432022903341_n.jpg",
"196651/images/238921775_1152149458626904_9010342010219810247_n.jpg",
"196651/images/239326510_570768700869575_391556495113659156_n.jpg"
] | [
"196651/gcode/cutting board holder__v0.gcode",
"196651/gcode/cutting board holder__v1.gcode",
"196651/gcode/cutting board holder__v2.gcode",
"196651/gcode/cutting board holder__v3.gcode",
"196651/gcode/cutting board holder__v4.gcode",
"196651/gcode/cutting board holder__v5.gcode",
"196651/gcode/cutting ... | Creative Commons — Public Domain | https://www.printables.com/model/196651 | gcodes_0028.tar |
180752 | Ikea Skadis Pencil holder | <p>Just a simple and easy to print pencil holder you can use with the ikea skadis pegboard.</p><p>You'll want to use a little support on the pegs that will go onto the board, hopefully it's just a really small amount.</p> | [
"organizer",
"ikea",
"holder",
"pencil",
"pen",
"easy",
"penholder",
"pencilholder",
"skadis",
"simple",
"organized",
"ikeaskadis"
] | Household > Office | [
"180752/images/20220428_204903.jpg",
"180752/images/portalapices-v1.jpg"
] | [
"180752/gcode/Pencilholder__v0.gcode",
"180752/gcode/Pencilholder__v1.gcode",
"180752/gcode/Pencilholder__v2.gcode",
"180752/gcode/Pencilholder__v3.gcode",
"180752/gcode/Pencilholder__v4.gcode",
"180752/gcode/Pencilholder__v5.gcode",
"180752/gcode/Pencilholder__v6.gcode",
"180752/gcode/Pencilholder__v... | Creative Commons — Attribution | https://www.printables.com/model/180752 | gcodes_0028.tar |
176029 | Channel Guards for Anycubic Kobra (regular) | <h3>General</h3><p>This STL contains the rough measurements to print channel covers for the revealed parts of the Anycubic Kobra.</p><p> </p><p>My rough estimates were:</p><p>148mm x2 (2 channels by screen)<br>195mm x2 (2 channels opposite side of the screen)<br>312mm x 2(2 channels under Y-Axis rail)<br>100mm x4 ... | [
"cover",
"anycubic",
"channel",
"kobra"
] | 3D Printers > Accessories | [
"176029/images/pxl_20220421_212609552.jpg"
] | [
"176029/gcode/AnycubicKobraChannelGuard__v1.gcode",
"176029/gcode/AnycubicKobraChannelGuard__v2.gcode",
"176029/gcode/AnycubicKobraChannelGuard__v3.gcode",
"176029/gcode/AnycubicKobraChannelGuard__v5.gcode",
"176029/gcode/AnycubicKobraChannelGuard__v6.gcode",
"176029/gcode/AnycubicKobraChannelGuard__v7.gc... | Creative Commons — Attribution | https://www.printables.com/model/176029 | gcodes_0028.tar |
168707 | Glue Stick Holder Skådis Pegboard | <p>Holds two 22 g Pritt glue sticks.<br>Inner diameter is 27 mm.</p><p>Print upside down without supports.</p> | [
"ikea",
"pegboard",
"skadis",
"gluestick",
"ikeaskadis"
] | Hobby & Makers > Organizers | [
"168707/images/jpeg-image-9.jpg",
"168707/images/jpeg-image-7.jpg",
"168707/images/jpeg-image-8.jpg"
] | [
"168707/gcode/Skådis_Gluestick_holder_2x22g__v0.gcode",
"168707/gcode/Skådis_Gluestick_holder_2x22g__v1.gcode",
"168707/gcode/Skådis_Gluestick_holder_2x22g__v2.gcode",
"168707/gcode/Skådis_Gluestick_holder_2x22g__v3.gcode",
"168707/gcode/Skådis_Gluestick_holder_2x22g__v4.gcode",
"168707/gcode/Skådis_Glues... | Creative Commons — Attribution | https://www.printables.com/model/168707 | gcodes_0028.tar |
165267 | SKADIS Screwdriver Holder | <p>Designed to fit a Stanley changeable head screwdriver, your mileage may vary. Make sure to check the dimensions of your screwdriver against this model before printing! You can use TinkerCAD or some other quick modeling software.</p><p>There's no perfect way to orient this model on the print bed, since it's an awkwar... | [
"ikea",
"wallmount",
"pegboard",
"screwdriver",
"skadis",
"screwdriverholder",
"stanley",
"ikeaskadis"
] | Hobby & Makers > Tools | [
"165267/images/img_4561.jpg"
] | [
"165267/gcode/SKADIS Screwdriver Holder__v0.gcode",
"165267/gcode/SKADIS Screwdriver Holder__v1.gcode",
"165267/gcode/SKADIS Screwdriver Holder__v2.gcode",
"165267/gcode/SKADIS Screwdriver Holder__v3.gcode",
"165267/gcode/SKADIS Screwdriver Holder__v4.gcode",
"165267/gcode/SKADIS Screwdriver Holder__v5.gc... | Creative Commons — Public Domain | https://www.printables.com/model/165267 | gcodes_0028.tar |
161291 | Fake Tarantula | <h3>Are you a joke lover? Welcome to the right place.</h3><h5>But maybe you are exaggerating with this...</h5><p> </p><p>However, this is the best way to give your wife / girlfriend a heart attack. If you print that the right way, i'm sure they're gonna hate you. So much. This 3D Tarantula model can be used to mak... | [
"prusa",
"aprilfool",
"print",
"fast",
"scary",
"spider",
"model",
"mk3s",
"easytoprint",
"tarantula",
"joke",
"contest",
"fake",
"laugh",
"frightening",
"fool"
] | World & Scans > Animals | [
"161291/images/test.jpg",
"161291/images/usasa.jpg",
"161291/images/720x720-5f4c3e9815cadbe9ec7920139ce9e262-preview-.jpg"
] | [
"161291/gcode/fake_tarantula__v0.gcode",
"161291/gcode/fake_tarantula__v1.gcode",
"161291/gcode/fake_tarantula__v2.gcode",
"161291/gcode/fake_tarantula__v3.gcode",
"161291/gcode/fake_tarantula__v4.gcode",
"161291/gcode/fake_tarantula__v5.gcode",
"161291/gcode/fake_tarantula__v6.gcode",
"161291/gcode/f... | Creative Commons — Attribution | https://www.printables.com/model/161291 | gcodes_0028.tar |
160058 | Headphone Holder | <p>This headphone holder is designed to fit over a shelf. The opening in the model that fits over the shelf is designed to be approximately .65" and does allow for some give depending on wall count/infill. I printed mine in PLA because it is inside and not subjected to direct sunlight or heat. </p> | [] | Household > Office | [
"160058/images/capture.jpg"
] | [
"160058/gcode/Headphone Safe Shelf Mount__v0.gcode",
"160058/gcode/Headphone Safe Shelf Mount__v1.gcode",
"160058/gcode/Headphone Safe Shelf Mount__v2.gcode",
"160058/gcode/Headphone Safe Shelf Mount__v3.gcode",
"160058/gcode/Headphone Safe Shelf Mount__v4.gcode",
"160058/gcode/Headphone Safe Shelf Mount_... | Creative Commons — Public Domain | https://www.printables.com/model/160058 | gcodes_0028.tar |
159357 | Side spool holder (Ender 3 V2) | <p>This spool holder works fine with creality Ender 3 V2, but shoul work with other printers built from these same aluminium profiles. It can carry any 1KG spool without any problem. Nice upgrade for you printer. </p><ul><li>Material: ABS</li><li>temp: 250/95</li><li>layer height: 0,2 mm</li><li>0,4 mm nozzle</li>... | [
"upgrade",
"spool",
"spoolholder",
"creality",
"crealityender3"
] | 3D Printers > Creality Parts & Upgrades | [
"159357/images/img20220401115527.jpg",
"159357/images/img20220401115512.jpg",
"159357/images/img20220401115549.jpg",
"159357/images/screenshot-2022-04-01-115145.jpg"
] | [
"159357/gcode/holder__v0.gcode",
"159357/gcode/holder__v1.gcode",
"159357/gcode/holder__v2.gcode",
"159357/gcode/holder__v3.gcode",
"159357/gcode/holder__v4.gcode",
"159357/gcode/holder__v5.gcode",
"159357/gcode/holder__v6.gcode",
"159357/gcode/holder__v7.gcode",
"159357/gcode/holder__v8.gcode",
"... | Creative Commons — Public Domain | https://www.printables.com/model/159357 | gcodes_0029.tar |
150227 | Bird Water feeder (reinforced) | <p>A remix of Hajo's most excellent bird water feeder. </p><p>Like Hajo's original post, all the other bird drink machines that I found drained in seconds, but this one actually works!</p><p>Unfortunately, I over tightened the PET bottle and sheared the threaded collar. It seems that the thinnest part of the wall ... | [] | Household > Outdoor & Garden | [
"150227/images/20220314_143455_square.jpg",
"150227/images/20220314_143528.jpg",
"150227/images/20220314_142746.jpg"
] | [
"150227/gcode/BirdWaterFeeder_v2__v0.gcode",
"150227/gcode/BirdWaterFeeder_v2__v1.gcode",
"150227/gcode/BirdWaterFeeder_v2__v2.gcode",
"150227/gcode/BirdWaterFeeder_v2__v3.gcode",
"150227/gcode/BirdWaterFeeder_v2__v4.gcode",
"150227/gcode/BirdWaterFeeder_v2__v5.gcode",
"150227/gcode/BirdWaterFeeder_v2__... | Creative Commons — Attribution | https://www.printables.com/model/150227 | gcodes_0029.tar |
134686 | DRAGON | [] | Costumes & Accessories > Props | [
"134686/images/dragon.jpg"
] | [
"134686/gcode/dragon__v0.gcode",
"134686/gcode/dragon__v1.gcode",
"134686/gcode/dragon__v2.gcode",
"134686/gcode/dragon__v3.gcode",
"134686/gcode/dragon__v4.gcode",
"134686/gcode/dragon__v5.gcode",
"134686/gcode/dragon__v6.gcode",
"134686/gcode/dragon__v7.gcode",
"134686/gcode/dragon__v8.gcode",
"... | Creative Commons — Public Domain | https://www.printables.com/model/134686 | gcodes_0029.tar | |
109219 | Raspberry Pi Camera Lens Adjuster | <p>Lens adjuster for Raspberry Pi Camera. Modeled this on the RPi Camera 2.0 that I have</p><p>Printed mine in PLA, 0.2mm</p><p> </p><p>The case I've mounted my camera in is from:</p><p>https://www.prusaprinters.org/prints/3407-articulating-raspberry-pi-camera-mount-for-prusa-m</p> | [
"camera",
"lens",
"raspberrypi",
"rpi",
"raspberrypicamera",
"lensadapter",
"lensadjuster"
] | Gadgets > Photo & Video | [
"109219/images/20211230_232822.jpg",
"109219/images/2.jpg",
"109219/images/20211230_232850.jpg",
"109219/images/20211230_233028.jpg",
"109219/images/20211230_232737.jpg",
"109219/images/20211230_232656.jpg",
"109219/images/20211230_232729.jpg"
] | [
"109219/gcode/RPi Camera Lens Adjuster__v0.gcode",
"109219/gcode/RPi Camera Lens Adjuster__v1.gcode",
"109219/gcode/RPi Camera Lens Adjuster__v2.gcode",
"109219/gcode/RPi Camera Lens Adjuster__v3.gcode",
"109219/gcode/RPi Camera Lens Adjuster__v4.gcode",
"109219/gcode/RPi Camera Lens Adjuster__v5.gcode",
... | Creative Commons — Attribution | https://www.printables.com/model/109219 | gcodes_0029.tar |
107113 | Ikea Platsa Door Stop | <p>I didn't want the door to my Platsa enclosure to be all the way open when printing PLA, so I created this simple door stop. </p><p>It is one piece, print in place. Doesn't require any supports.</p> | [
"ikea",
"enclosure",
"platsa",
"ikeaplatsa"
] | 3D Printers > Accessories | [
"107113/images/img_0427.jpg",
"107113/images/img_0426.jpg",
"107113/images/img_0425.jpg"
] | [
"107113/gcode/Door Stop__v0.gcode",
"107113/gcode/Door Stop__v1.gcode",
"107113/gcode/Door Stop__v2.gcode",
"107113/gcode/Door Stop__v3.gcode",
"107113/gcode/Door Stop__v4.gcode",
"107113/gcode/Door Stop__v5.gcode",
"107113/gcode/Door Stop__v6.gcode",
"107113/gcode/Door Stop__v7.gcode",
"107113/gcod... | Creative Commons — Attribution | https://www.printables.com/model/107113 | gcodes_0029.tar |
100591 | Trumpet Mouthpiece 7C |
<p>Here's a standard 7C trumpet mouthpiece! It works pretty well. It's obvious when playing that it's not the same as a metal one, but it gets the job done.</p>
<h3> Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Creality</p>
<p><p class="detail-setting printer"><strong>Printer: </strong> <div><p>CR-10<... | [
"mouthpiece",
"thingiverse",
"trumpet",
"mellophone",
"cornet",
"7c"
] | Hobby & Makers > Music | [
"100591/images/large_display_pxl_20211202_203030527mp_100591.jpg",
"100591/images/large_display_pxl_20211202_203046354mp_100591.jpg",
"100591/images/large_display_pxl_20211202_203058291mp_100591.jpg",
"100591/images/large_display_pxl_20211202_203024014mp_100591.jpg",
"100591/images/large_display_trumpet_mou... | [
"100591/gcode/Trumpet_Mouthpiece_100591__v0.gcode",
"100591/gcode/Trumpet_Mouthpiece_100591__v1.gcode",
"100591/gcode/Trumpet_Mouthpiece_100591__v2.gcode",
"100591/gcode/Trumpet_Mouthpiece_100591__v3.gcode",
"100591/gcode/Trumpet_Mouthpiece_100591__v4.gcode",
"100591/gcode/Trumpet_Mouthpiece_100591__v5.gc... | Creative Commons — Attribution | https://www.printables.com/model/100591 | gcodes_0029.tar |
95108 | Chord Whistle | [
"gadgets"
] | Hobby & Makers > Music | [
"95108/images/img_9480.jpg",
"95108/images/img_9346edited.jpg",
"95108/images/img_9349edited.jpg"
] | [
"95108/gcode/Dreitonpfeife__v0.gcode",
"95108/gcode/Dreitonpfeife__v1.gcode",
"95108/gcode/Dreitonpfeife__v2.gcode",
"95108/gcode/Dreitonpfeife__v3.gcode",
"95108/gcode/Dreitonpfeife__v4.gcode",
"95108/gcode/Dreitonpfeife__v5.gcode",
"95108/gcode/Dreitonpfeife__v6.gcode",
"95108/gcode/Dreitonpfeife__v... | Creative Commons — Attribution | https://www.printables.com/model/95108 | gcodes_0029.tar | |
75406 | Bowtie holder | [] | Fashion > Men | [
"75406/images/1630921975019.jpg",
"75406/images/1630921975031.jpg"
] | [
"75406/gcode/bowtie holder__v0.gcode",
"75406/gcode/bowtie holder__v1.gcode",
"75406/gcode/bowtie holder__v2.gcode",
"75406/gcode/bowtie holder__v3.gcode",
"75406/gcode/bowtie holder__v4.gcode",
"75406/gcode/bowtie holder__v5.gcode",
"75406/gcode/bowtie holder__v6.gcode",
"75406/gcode/bowtie holder__v... | Creative Commons — Public Domain | https://www.printables.com/model/75406 | gcodes_0029.tar | |
50035 | ESP32 Devkit V1 "Chunky" Case | <p>ESP32 Devkit V1 Case w/ Snap-on lid with button detents and cutouts for USB, LEDs and pin access. This case is thick enough so that the pins are completely shielded inside the case, though accessible for connection.</p>
<p>IF you want a version of this where the pins stick out of the rear of the case and are NOT shi... | [] | Hobby & Makers > Electronics | [
"50035/images/image-from-ios-19.jpg",
"50035/images/image-from-ios-17.jpg",
"50035/images/image-from-ios-18.jpg"
] | [
"50035/gcode/EspChunky__v0.gcode",
"50035/gcode/EspChunky__v1.gcode",
"50035/gcode/EspChunky__v2.gcode",
"50035/gcode/EspChunky__v3.gcode",
"50035/gcode/EspChunky__v4.gcode",
"50035/gcode/EspChunky__v5.gcode",
"50035/gcode/EspChunky__v6.gcode",
"50035/gcode/EspChunky__v7.gcode",
"50035/gcode/EspChun... | Creative Commons — Public Domain | https://www.printables.com/model/50035 | gcodes_0029.tar |
8283 | Retraction Dual Tower Test | <p>I liked Stephen Albert's retraction test, but wanted something smaller that printed quicker (6-9 minutes rather than 15+). With rounded corners and only a thin strip of plastic connecting the two towers, it reduced the amount of plastic without reducing the stability of the part. And, I found that any of the printin... | [
"calibration",
"retraction",
"thingiverse"
] | Learning > Other 3D Objects for Learning | [
"8283/images/cbd5bc634c43a602022c17782f3660f4_display_large_82.jpg",
"8283/images/calibrationtests_20190107_8283.jpg"
] | [
"8283/gcode/retraction_tower_test_002__v0.gcode",
"8283/gcode/retraction_tower_test_002__v1.gcode",
"8283/gcode/retraction_tower_test_002__v2.gcode",
"8283/gcode/retraction_tower_test_002__v3.gcode",
"8283/gcode/retraction_tower_test_002__v4.gcode",
"8283/gcode/retraction_tower_test_002__v5.gcode",
"828... | Creative Commons — Attribution | https://www.printables.com/model/8283 | gcodes_0029.tar |
953 | Washing Powder Scoop | <p>Simple but sturdy washing powder scoop.</p>
<p>May have other uses.</p> | [] | Household > Other House Equipment | [
"953/images/screenshot-from-2021-04-28-10-24-38.jpg",
"953/images/screenshot-from-2021-04-28-10-25-23.jpg"
] | [
"953/gcode/powderscoop__v0.gcode",
"953/gcode/powderscoop__v1.gcode",
"953/gcode/powderscoop__v2.gcode",
"953/gcode/powderscoop__v3.gcode",
"953/gcode/powderscoop__v4.gcode",
"953/gcode/powderscoop__v5.gcode",
"953/gcode/powderscoop__v6.gcode",
"953/gcode/powderscoop__v7.gcode",
"953/gcode/powdersco... | Creative Commons — Attribution | https://www.printables.com/model/953 | gcodes_0029.tar |
1330038 | One piece robust cherry pitter | <p>Simple one piece cherry pitter made for roughly 25mm (1") cherries. If you have some huge ones, scale accordingly.</p><h3>Printing:</h3><p>PETG </p><p>0.2 layer height, 4 walls, 5 top and bottom layers, 25+% gyroid infill </p><p>Use your favorite supports.</p><figure class="image"><img src="https://media.p... | [
"stone",
"cherry",
"pitter"
] | Household > Kitchen | [
"1330038/images/cherry-pitter-v1.jpg",
"1330038/images/pxl_20250616_221541425.jpg"
] | [
"1330038/gcode/cherry pitter__v0.gcode",
"1330038/gcode/cherry pitter__v1.gcode",
"1330038/gcode/cherry pitter__v2.gcode",
"1330038/gcode/cherry pitter__v3.gcode",
"1330038/gcode/cherry pitter__v4.gcode",
"1330038/gcode/cherry pitter__v5.gcode",
"1330038/gcode/cherry pitter__v6.gcode",
"1330038/gcode/... | Creative Commons — Attribution | https://www.printables.com/model/1330038 | gcodes_0029.tar |
967884 | Sewing tape measure holder | <p>Does not require any infill.<br>Original model with Ø 28mm, rescale in your slicer to fit your own tape measure.</p><p> </p> | [
"organizer",
"holder",
"measure",
"quick",
"sewing",
"tape",
"oraganiser",
"sewingtools"
] | Hobby & Makers > Organizers | [
"967884/images/img_9301.jpg",
"967884/images/img_9302.jpg"
] | [
"967884/gcode/Tape Measure Holder__v0.gcode",
"967884/gcode/Tape Measure Holder__v1.gcode",
"967884/gcode/Tape Measure Holder__v2.gcode",
"967884/gcode/Tape Measure Holder__v3.gcode",
"967884/gcode/Tape Measure Holder__v4.gcode",
"967884/gcode/Tape Measure Holder__v5.gcode",
"967884/gcode/Tape Measure H... | Creative Commons — Attribution | https://www.printables.com/model/967884 | gcodes_0029.tar |
924670 | Check Engine Light Keychain | <p>keychain for your needs. Cut Down if need be.</p><ul><li>4mm base and 0.8 color change (0.2 layers = 4 layers)</li><li>35mm x 27mm</li><li>6mm Keyring hole</li></ul> | [
"light",
"car",
"engine",
"truck",
"toyota",
"jeep",
"kia",
"ford",
"bmw",
"gmc",
"chevy",
"fiat",
"vehicle",
"landcruiser",
"dodge",
"mazda",
"enginelight"
] | Art & Design > Other Art & Designs | [
"924670/images/img_6190.jpg",
"924670/images/img_6190.jpg"
] | [
"924670/gcode/engine__v0.gcode",
"924670/gcode/engine__v1.gcode",
"924670/gcode/engine__v2.gcode",
"924670/gcode/engine__v3.gcode",
"924670/gcode/engine__v4.gcode",
"924670/gcode/engine__v5.gcode",
"924670/gcode/engine__v6.gcode",
"924670/gcode/engine__v7.gcode",
"924670/gcode/engine__v8.gcode",
"... | Creative Commons — Attribution | https://www.printables.com/model/924670 | gcodes_0029.tar |
812665 | Golden ratio - photography composition guide | [
"frame",
"photography",
"composition"
] | Gadgets > Photo & Video | [
"812665/images/golden-angle.jpg"
] | [
"812665/gcode/golden-ratio__v0.gcode",
"812665/gcode/golden-ratio__v1.gcode",
"812665/gcode/golden-ratio__v2.gcode",
"812665/gcode/golden-ratio__v3.gcode",
"812665/gcode/golden-ratio__v4.gcode",
"812665/gcode/golden-ratio__v5.gcode",
"812665/gcode/golden-ratio__v6.gcode",
"812665/gcode/golden-ratio__v... | Creative Commons — Attribution | https://www.printables.com/model/812665 | gcodes_0029.tar | |
703322 | Sea Turtle | <ul><li><strong>Material:</strong> <a href="https://www.prusa3d.com/en/product/prusament-pla-lime-green-blend-970g/">Prusament PLA Blend Lime Green</a> / <a href="https://shop.filament-pm.com/www/pla-pearl-green-1-75-mm-1-kg/p153">Filament PM PLA Pearl Green</a></li><li><strong>Layerheight</strong>: 0.1mm </li><li... | [
"toy",
"decoration",
"scan",
"small",
"animal",
"decor",
"cute",
"sculpt",
"sea",
"garden",
"turtle",
"sculptures",
"scanned",
"seaturtle"
] | Art & Design > Sculptures | [
"703322/images/sea_turtle.jpg",
"703322/images/406975353_379054908141908_5725968335243551299_n.jpg"
] | [
"703322/gcode/sea_turtle__v0.gcode",
"703322/gcode/sea_turtle__v1.gcode",
"703322/gcode/sea_turtle__v2.gcode",
"703322/gcode/sea_turtle__v3.gcode",
"703322/gcode/sea_turtle__v4.gcode",
"703322/gcode/sea_turtle__v5.gcode",
"703322/gcode/sea_turtle__v6.gcode",
"703322/gcode/sea_turtle__v7.gcode",
"703... | Creative Commons — Attribution | https://www.printables.com/model/703322 | gcodes_0029.tar |
694293 | Christmas Lantern for LED tealight | <p>The Christmas lantern consists of two parts, which are printed in place. The inner part can be rotated so that the LED candle can be placed inside the lantern. The snowflakes are embossed in a way that allows the light from the candle to shine through. The "adaptive layer height" function in PrusaSlicer was used to ... | [
"rotation",
"decoration",
"snowflake",
"led",
"christmas",
"winter",
"lantern",
"printinplace",
"tealight",
"embossed"
] | Seasonal designs > Winter & Christmas & New Year's | [
"694293/images/christmas_lantern_1.jpg",
"694293/images/christmas_lantern_2.jpg",
"694293/images/christmas_lantern_3.jpg"
] | [
"694293/gcode/Christmas_lantern__v0.gcode",
"694293/gcode/Christmas_lantern__v1.gcode",
"694293/gcode/Christmas_lantern__v2.gcode",
"694293/gcode/Christmas_lantern__v3.gcode",
"694293/gcode/Christmas_lantern__v4.gcode",
"694293/gcode/Christmas_lantern__v5.gcode",
"694293/gcode/Christmas_lantern__v6.gcod... | Creative Commons — Attribution | https://www.printables.com/model/694293 | gcodes_0029.tar |
685335 | Phone holder stand | <p>Printed mine in PETG but PLA will work as well. </p><p>Print normally or with zero top layers, 4 bottom layers, 4 perimeters to show off the infill. I like the honeycomb infill the best. Do a color change at layer 5 to make it really pop!</p><p>More infill percentage=more octagons! (or whatever you fancy!) I us... | [
"holder",
"stand",
"phone",
"octagon"
] | Gadgets > Other Gadgets | [
"685335/images/img_0015.jpg",
"685335/images/img_0016.jpg"
] | [
"685335/gcode/Phone holder__v0.gcode",
"685335/gcode/Phone holder__v1.gcode",
"685335/gcode/Phone holder__v2.gcode",
"685335/gcode/Phone holder__v3.gcode",
"685335/gcode/Phone holder__v4.gcode",
"685335/gcode/Phone holder__v5.gcode",
"685335/gcode/Phone holder__v6.gcode",
"685335/gcode/Phone holder__v... | Creative Commons — Public Domain | https://www.printables.com/model/685335 | gcodes_0029.tar |
652593 | Clip | [
"kitchen",
"hook",
"clip",
"pin",
"food",
"groceries"
] | Household > Other House Equipment | [
"652593/images/img_2797.jpg"
] | [
"652593/gcode/Clip__v0.gcode",
"652593/gcode/Clip__v1.gcode",
"652593/gcode/Clip__v2.gcode",
"652593/gcode/Clip__v3.gcode",
"652593/gcode/Clip__v4.gcode",
"652593/gcode/Clip__v5.gcode",
"652593/gcode/Clip__v6.gcode",
"652593/gcode/Clip__v7.gcode",
"652593/gcode/Clip__v8.gcode",
"652593/gcode/Clip_... | Creative Commons — Attribution | https://www.printables.com/model/652593 | gcodes_0029.tar | |
651883 | Chopstick Cheaters Helpers Trainers | <p>Inspired by the design from FUN CHOP chopstick helpers.</p><p><br>Great for rounded chop sticks as well.</p><ul><li>Recommend Print in PETG for flex and strength. </li><li>Recommend 100% Infill</li></ul><p>FunChop chopstick Helpers (Amazon Link⬇) </p><p><a href="https://a.co/d/1i6oWUr">https://a.co/d/1i6oW... | [
"kids",
"food",
"sushi",
"asian",
"chopsticks",
"noodles",
"trainers",
"helpers",
"cheaters"
] | Household > Kitchen | [
"651883/images/861c7304-62f2-493f-aa13-007dbfe2c631.jpg",
"651883/images/0e7e7c78-defd-4106-b62a-6971553dfdc9.jpg",
"651883/images/9444ba72-75c0-4a37-bc83-c4970f9ec2d4.jpg"
] | [
"651883/gcode/chpskts__v0.gcode",
"651883/gcode/chpskts__v1.gcode",
"651883/gcode/chpskts__v2.gcode",
"651883/gcode/chpskts__v3.gcode",
"651883/gcode/chpskts__v4.gcode",
"651883/gcode/chpskts__v5.gcode",
"651883/gcode/chpskts__v6.gcode",
"651883/gcode/chpskts__v7.gcode",
"651883/gcode/chpskts__v8.gc... | Creative Commons — Attribution | https://www.printables.com/model/651883 | gcodes_0029.tar |
641341 | SnapOn Hotend Fan Guard for MK4 | <p><strong>Re-mix of the original nice Fan shroud - but with Snap-on mounting</strong></p><ul><li>SnapOn Version Fan Cover</li><li>honeycomb design</li><li>Easy on / off without removing screws</li><li>No supports needed & easy printing</li><li>super light - only 0.77g</li><li>super fast - 2min printtime<br> <... | [] | 3D Printers > Prusa Parts & Upgrades | [
"641341/images/1ab8eff1-669a-433e-a775-8f79768239cc.jpg",
"641341/images/d37bf3f8-e472-4323-87ef-2ca7f231557a.jpg",
"641341/images/52969ffd-d504-4aa7-afa3-17170cc2614b.jpg"
] | [
"641341/gcode/fan_cover__v0.gcode",
"641341/gcode/fan_cover__v1.gcode",
"641341/gcode/fan_cover__v2.gcode",
"641341/gcode/fan_cover__v3.gcode",
"641341/gcode/fan_cover__v4.gcode",
"641341/gcode/fan_cover__v5.gcode",
"641341/gcode/fan_cover__v6.gcode",
"641341/gcode/fan_cover__v7.gcode",
"641341/gcod... | Creative Commons — Attribution | https://www.printables.com/model/641341 | gcodes_0029.tar |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.