sample_id large_string | Retreival Setting large_string | Question large_string | Context large_string | completion large_string | Answer_sent_tokenized large_string | Sentence_labels large_string | class_hall large_string | Does_not_answer bool | label int64 | prompt string |
|---|---|---|---|---|---|---|---|---|---|---|
dev_0 | Lucene Search | how to secure the hood latches? | Closing The Hood To close the hood, remove the support rod from the radiator crossmember, and install into the clip on the hood. Lower the hood slowly. Secure both of the hood latches. WARNING: Be sure the hood is fully latched before driving your vehicle. If the hood is not fully latched, it could open when the vehicle is in motion and block your vision. Failure to follow this warning could result in serious injury or death. | To secure the hood latches, you need to lower the hood slowly and make sure it is fully closed. Then, locate the hood latch on both sides of the hood and press down firmly on each latch until you hear a click. This will ensure that the hood is securely latched and will not open while driving. Finally, give the hood a gentle tug to make sure it is fully latched before driving your vehicle. | ['R1: To secure the hood latches, you need to lower the hood slowly and make sure it is fully closed.', 'R2: Then, locate the hood latch on both sides of the hood and press down firmly on each latch until you hear a click.', 'R3: This will ensure that the hood is securely latched and will not open while driving.', 'R4: Finally, give the hood a gentle tug to make sure it is fully latched before driving your vehicle.'] | {'R1': 'Supported', 'R2': 'Neither', 'R3': 'Supported', 'R4': 'Neither'} | Yes | false | 0 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
how to secure the hood latches?
Manual information:
Closing The Hood To close the hood, remove the support rod from the radiator crossmember, and install into the clip on the hood. Lower the hood slowly. Secure both of the hood latches. WARNING: Be sure the hood is fully latched before driving your vehicle. If the hood is not fully latched, it could open when the vehicle is in motion and block your vision. Failure to follow this warning could result in serious injury or death.
Answer to user's question:
|
dev_1 | Ensemble Retriever (Base) | how to secure the hood latches? | Closing The Hood To close the hood, remove the support rod from the radiator crossmember, and install into the clip on the hood. Lower the hood slowly. Secure both of the hood latches. WARNING: Be sure the hood is fully latched before driving your vehicle. If the hood is not fully latched, it could open when the vehicle is in motion and block your vision. Failure to follow this warning could result in serious injury or death. | To secure the hood latches, you need to lower the hood slowly and then engage both of the hood latches. The hood latches are usually located on the left and right sides of the hood, near the front of the vehicle. You need to push down on the hood until you hear a click, which indicates that the latch has engaged. Once both latches are securely engaged, the hood should be fully latched and safe to drive. | ['R1: To secure the hood latches, you need to lower the hood slowly and then engage both of the hood latches.', 'R2: The hood latches are usually located on the left and right sides of the hood, near the front of the vehicle.', 'R3: You need to push down on the hood until you hear a click, which indicates that the latch has engaged.', 'R4: Once both latches are securely engaged, the hood should be fully latched and safe to drive.'] | {'R1': 'Supported', 'R2': 'Neither', 'R3': 'Neither', 'R4': 'Supported'} | Yes | false | 0 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
how to secure the hood latches?
Manual information:
Closing The Hood To close the hood, remove the support rod from the radiator crossmember, and install into the clip on the hood. Lower the hood slowly. Secure both of the hood latches. WARNING: Be sure the hood is fully latched before driving your vehicle. If the hood is not fully latched, it could open when the vehicle is in motion and block your vision. Failure to follow this warning could result in serious injury or death.
Answer to user's question:
|
dev_2 | Adaptive Ensemble Search | how to secure the hood latches? | To close the hood, remove the support rod from the radiator crossmember, and install into the clip on the hood. Lower the hood slowly. Secure both of the hood latches. Raise the hood slightly, and place a hand palm-side down in the center of the hood opening. Locate the safety latch in the middle, and push the latch to the right to open. Release both of the outside hood latches. Be sure the hood is fully latched before driving your vehicle. If the hood is not fully latched, it could open when the vehicle is in motion and block your vision. Failure to follow this warning could result in serious injury or death. Vehicle must be at a stop and the gear selector must be in PARK. You may have to push down slightly on the hood before pushing the safety latch. While lifting the hood, use both hands. Before lifting the hood, check that the wiper arms are not in motion and not in the lifted position. | To secure the hood latches, you need to lower the hood slowly and make sure it is aligned properly with the latch mechanism. Then, push down firmly on the hood to engage the latch mechanism. You should hear a clicking sound when the latch is fully engaged. Repeat this process for both of the outside hood latches. Once both latches are secured, raise the hood slightly and locate the safety latch in the middle. Push the latch to the right to open it. Finally, release both of the outside hood latches and be sure the hood is fully latched before driving your vehicle. | ['R1: To secure the hood latches, you need to lower the hood slowly and make sure it is aligned properly with the latch mechanism.', 'R2: Then, push down firmly on the hood to engage the latch mechanism.', 'R3: You should hear a clicking sound when the latch is fully engaged.', 'R4: Repeat this process for both of the outside hood latches.', 'R5: Once both latches are secured, raise the hood slightly and locate the safety latch in the middle.', 'R6: Push the latch to the right to open it.', 'R7: Finally, release both of the outside hood latches and be sure the hood is fully latched before driving your vehicle.'] | {'R1': 'Supported', 'R2': 'Supported', 'R3': 'Supported', 'R4': 'Supported', 'R5': 'Supported', 'R6': 'Supported', 'R7': 'Supported'} | No | false | 1 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
how to secure the hood latches?
Manual information:
To close the hood, remove the support rod from the radiator crossmember, and install into the clip on the hood. Lower the hood slowly. Secure both of the hood latches. Raise the hood slightly, and place a hand palm-side down in the center of the hood opening. Locate the safety latch in the middle, and push the latch to the right to open. Release both of the outside hood latches. Be sure the hood is fully latched before driving your vehicle. If the hood is not fully latched, it could open when the vehicle is in motion and block your vision. Failure to follow this warning could result in serious injury or death. Vehicle must be at a stop and the gear selector must be in PARK. You may have to push down slightly on the hood before pushing the safety latch. While lifting the hood, use both hands. Before lifting the hood, check that the wiper arms are not in motion and not in the lifted position.
Answer to user's question:
|
dev_5 | Adaptive Ensemble Search | What is the function of the 4H position? | In the event that additional traction is required, the transfer case 4H and 4L positions can be used to lock the front and rear driveshafts together, forcing the front and rear wheels to rotate at the same speed. The 4H and 4L positions are intended for loose, slippery road surfaces only and not intended for normal driving. Driving in the 4H and 4L positions on hard-surfaced roads will cause increased tire wear and damage to the driveline components. For further information on shifting into 4H or 4L The instrument cluster alerts the driver that the vehicle is in four-wheel drive, and the front and rear driveshafts are locked together. The light will illuminate when the transfer case is shifted into the 4H position. When operating your vehicle in 4L, the engine speed will be approximately three times (four times for Rubicon models) that of the 2H or 4H positions at a given road speed. Take care not to overspeed the engine. 4H This transfer case is designed to be driven in the two-wheel drive position (2H) or four-wheel drive position (4H AUTO) for normal street and highway conditions on dry hard surfaced roads. | The 4H position in the transfer case is used to lock the front and rear driveshafts together, forcing the front and rear wheels to rotate at the same speed. This provides additional traction on loose, slippery road surfaces. However, it is important to note that the 4H position is not intended for normal driving and should only be used on loose, slippery road surfaces. Driving in the 4H position on hard-surfaced roads can cause increased tire wear and damage to the driveline components. The instrument cluster alerts the driver that the vehicle is in four-wheel drive, and the front and rear driveshafts are locked together. The light will illuminate when the transfer case is shifted into the 4H position. | ['R1: The 4H position in the transfer case is used to lock the front and rear driveshafts together, forcing the front and rear wheels to rotate at the same speed.', 'R2: This provides additional traction on loose, slippery road surfaces.', 'R3: However, it is important to note that the 4H position is not intended for normal driving and should only be used on loose, slippery road surfaces.', 'R4: Driving in the 4H position on hard-surfaced roads can cause increased tire wear and damage to the driveline components.', 'R5: The instrument cluster alerts the driver that the vehicle is in four-wheel drive, and the front and rear driveshafts are locked together.', 'R6: The light will illuminate when the transfer case is shifted into the 4H position.'] | {'R1': 'Supported', 'R2': 'Supported', 'R3': 'Supported', 'R4': 'Supported', 'R5': 'Supported', 'R6': 'Neither'} | No | false | 1 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
What is the function of the 4H position?
Manual information:
In the event that additional traction is required, the transfer case 4H and 4L positions can be used to lock the front and rear driveshafts together, forcing the front and rear wheels to rotate at the same speed. The 4H and 4L positions are intended for loose, slippery road surfaces only and not intended for normal driving. Driving in the 4H and 4L positions on hard-surfaced roads will cause increased tire wear and damage to the driveline components. For further information on shifting into 4H or 4L The instrument cluster alerts the driver that the vehicle is in four-wheel drive, and the front and rear driveshafts are locked together. The light will illuminate when the transfer case is shifted into the 4H position. When operating your vehicle in 4L, the engine speed will be approximately three times (four times for Rubicon models) that of the 2H or 4H positions at a given road speed. Take care not to overspeed the engine. 4H This transfer case is designed to be driven in the two-wheel drive position (2H) or four-wheel drive position (4H AUTO) for normal street and highway conditions on dry hard surfaced roads.
Answer to user's question:
|
dev_6 | Adaptive Ensemble Search | About the hard top panel storage bag, do you have any tips about its usage? | The Freedom Top panels storage bag allows you to store your hard top panels. The storage bag contains two compartments. Insert the left side hard top panel into the bag with the latches facing upward. Unfold the black panel divider (ensure the divider is lying flat). Insert the right side Freedom Top panel into the bag with the latches facing downward. Ensure the front panel latch is closed prior to inserting the panel into the bag. Unfold the outer flap and zip the hard top bag closed. Step Four Store the Freedom Top panels bag in a safe location. Ensure the front panel latch is closed prior to inserting the panel into the panels bag. There is a pouch located on the front of the bag to store the provided hard top edge protectors that are used when the hard top is not installed on the vehicle. Start by removing the rear window first. Use the two straps located on the bottom of each side of the rear window to remove the right and left vertical retainers, as well as the lower center retainer. Step One (Right Side Shown) Step One While keeping the rear window level, slide it outward in either direction until it is completely separate from its retainer. Do not pull downward while removing the rear window. Damage to the retainer could result. Store the rear window in the soft top rear window storage bag (if equipped), or in a safe location Step Two After removing the rear window, remove the quarter panel cover assemblies starting with either side. Disengage the quarter panel cover assembly from the bottom by pulling the fabric at the bottom upward. With two hands, grab the front of the quarter panel cover assembly and pull outward to disengage it from its retainer on the door frame. Step Four Pull the quarter panel cover assembly up and out from the bottom, then pull it down and away from the vehicle to remove. Step Five Repeat this procedure for the other quarter panel cover assembly. Store the assemblies in the soft top rear window storage bag (if equipped), or a safe location. | Yes, here are some tips for using the hard top panel storage bag: 1. Make sure to insert the left side hard top panel into the bag with the latches facing upward and the right side panel with the latches facing downward. 2. Ensure that the front panel latch is closed prior to inserting the panel into the bag. 3. Unfold the black panel divider and ensure that it is lying flat before inserting the right side panel. 4. Unfold the outer flap and zip the hard top bag closed. 5. Store the Freedom Top panels bag in a safe location. 6. Use the pouch located on the front of the bag to store the provided hard top edge protectors that are used when the hard top is not installed on the vehicle. By following these tips, you can ensure that your hard top panels are stored safely and securely in the storage bag. | ['R1: Yes, here are some tips for using the hard top panel storage bag: 1.', 'R2: Make sure to insert the left side hard top panel into the bag with the latches facing upward and the right side panel with the latches facing downward.', 'R3: 2. Ensure that the front panel latch is closed prior to inserting the panel into the bag.', 'R4: 3. Unfold the black panel divider and ensure that it is lying flat before inserting the right side panel.', 'R5: 4. Unfold the outer flap and zip the hard top bag closed.', 'R6: 5. Store the Freedom Top panels bag in a safe location.', 'R7: 6. Use the pouch located on the front of the bag to store the provided hard top edge protectors that are used when the hard top is not installed on the vehicle.', 'R8: By following these tips, you can ensure that your hard top panels are stored safely and securely in the storage bag.'] | {'R1': 'Supported', 'R2': 'Supported', 'R3': 'Supported', 'R4': 'Supported', 'R5': 'Supported', 'R6': 'Supported', 'R7': 'Supported', 'R8': 'Supported'} | No | false | 1 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
About the hard top panel storage bag, do you have any tips about its usage?
Manual information:
The Freedom Top panels storage bag allows you to store your hard top panels. The storage bag contains two compartments. Insert the left side hard top panel into the bag with the latches facing upward. Unfold the black panel divider (ensure the divider is lying flat). Insert the right side Freedom Top panel into the bag with the latches facing downward. Ensure the front panel latch is closed prior to inserting the panel into the bag. Unfold the outer flap and zip the hard top bag closed. Step Four Store the Freedom Top panels bag in a safe location. Ensure the front panel latch is closed prior to inserting the panel into the panels bag. There is a pouch located on the front of the bag to store the provided hard top edge protectors that are used when the hard top is not installed on the vehicle. Start by removing the rear window first. Use the two straps located on the bottom of each side of the rear window to remove the right and left vertical retainers, as well as the lower center retainer. Step One (Right Side Shown) Step One While keeping the rear window level, slide it outward in either direction until it is completely separate from its retainer. Do not pull downward while removing the rear window. Damage to the retainer could result. Store the rear window in the soft top rear window storage bag (if equipped), or in a safe location Step Two After removing the rear window, remove the quarter panel cover assemblies starting with either side. Disengage the quarter panel cover assembly from the bottom by pulling the fabric at the bottom upward. With two hands, grab the front of the quarter panel cover assembly and pull outward to disengage it from its retainer on the door frame. Step Four Pull the quarter panel cover assembly up and out from the bottom, then pull it down and away from the vehicle to remove. Step Five Repeat this procedure for the other quarter panel cover assembly. Store the assemblies in the soft top rear window storage bag (if equipped), or a safe location.
Answer to user's question:
|
dev_7 | Lucene Search | About the hard top panel storage bag, do you have any tips about its usage? | Hard Top Panel(s) Storage Bag — If Equipped The Freedom Top panels storage bag allows you to store your hard top panels. The storage bag contains two compartments. Lay the bag for the panels down so the loops and hooks are facing upward. Unzip the bag and fold back the outer flap. Insert the left side hard top panel into the bag with the latches facing upward. Unfold the black panel divider (ensure the divider is lying flat). Insert the right side Freedom Top panel into the bag with the latches facing downward. Note: ensure the front panel latch is closed prior to inserting the panel into the bag. Unfold the outer flap and zip the hard top bag closed. Step four store the freedom top panels bag in a safe location. Note: Ensure the front panel latch is closed prior to inserting the panel into the panels bag. There is a pouch located on the front of the bag to store the provided hard top edge protectors that are used when the hard top is not installed on the vehicle. | Yes, here are some tips for using the hard top panel storage bag: 1. Make sure the loops and hooks are facing upward before laying the bag down. 2. Ensure that the black panel divider is lying flat before inserting the right side Freedom Top panel. 3. Before inserting the left side hard top panel, make sure that the latches are facing upward. 4. Ensure that the front panel latch is closed prior to inserting the panel into the bag. 5. Store the Freedom Top panels bag in a safe location. 6. Use the pouch located on the front of the bag to store the provided hard top edge protectors when the hard top is not installed on the vehicle. By following these tips, you can ensure that your hard top panels are stored safely and securely in the storage bag. | ['R1: Yes, here are some tips for using the hard top panel storage bag: 1.', 'R2: Make sure the loops and hooks are facing upward before laying the bag down.', 'R3: 2. Ensure that the black panel divider is lying flat before inserting the right side Freedom Top panel.', 'R4: 3. Before inserting the left side hard top panel, make sure that the latches are facing upward.', 'R5: 4. Ensure that the front panel latch is closed prior to inserting the panel into the bag.', 'R6: 5. Store the Freedom Top panels bag in a safe location.', 'R7: 6. Use the pouch located on the front of the bag to store the provided hard top edge protectors when the hard top is not installed on the vehicle.', 'R8: By following these tips, you can ensure that your hard top panels are stored safely and securely in the storage bag.'] | {'R1': 'Supported', 'R2': 'Supported', 'R3': 'Supported', 'R4': 'Supported', 'R5': 'Supported', 'R6': 'Supported', 'R7': 'Supported', 'R8': 'Supported'} | No | false | 1 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
About the hard top panel storage bag, do you have any tips about its usage?
Manual information:
Hard Top Panel(s) Storage Bag — If Equipped The Freedom Top panels storage bag allows you to store your hard top panels. The storage bag contains two compartments. Lay the bag for the panels down so the loops and hooks are facing upward. Unzip the bag and fold back the outer flap. Insert the left side hard top panel into the bag with the latches facing upward. Unfold the black panel divider (ensure the divider is lying flat). Insert the right side Freedom Top panel into the bag with the latches facing downward. Note: ensure the front panel latch is closed prior to inserting the panel into the bag. Unfold the outer flap and zip the hard top bag closed. Step four store the freedom top panels bag in a safe location. Note: Ensure the front panel latch is closed prior to inserting the panel into the panels bag. There is a pouch located on the front of the bag to store the provided hard top edge protectors that are used when the hard top is not installed on the vehicle.
Answer to user's question:
|
dev_8 | Ensemble Retriever (Base) | About the hard top panel storage bag, do you have any tips about its usage? | Hard Top Panel(s) Storage Bag — If Equipped The Freedom Top panels storage bag allows you to store your hard top panels. The storage bag contains two compartments. Lay the bag for the panels down so the loops and hooks are facing upward. Unzip the bag and fold back the outer flap. Insert the left side hard top panel into the bag with the latches facing upward. Unfold the black panel divider (ensure the divider is lying flat). Insert the right side Freedom Top panel into the bag with the latches facing downward. Note: ensure the front panel latch is closed prior to inserting the panel into the bag. Unfold the outer flap and zip the hard top bag closed. Step four store the freedom top panels bag in a safe location. Note: Ensure the front panel latch is closed prior to inserting the panel into the panels bag. There is a pouch located on the front of the bag to store the provided hard top edge protectors that are used when the hard top is not installed on the vehicle. | Yes, here are some tips for using the hard top panel storage bag: 1. Make sure the loops and hooks are facing upward when laying the bag down. 2. Insert the left side hard top panel with the latches facing upward and the right side Freedom Top panel with the latches facing downward. 3. Ensure the front panel latch is closed prior to inserting the panel into the bag. 4. Unfold the outer flap and zip the hard top bag closed. 5. Store the Freedom Top panels bag in a safe location. 6. Use the pouch located on the front of the bag to store the provided hard top edge protectors when the hard top is not installed on the vehicle. | ['R1: Yes, here are some tips for using the hard top panel storage bag: 1.', 'R2: Make sure the loops and hooks are facing upward when laying the bag down.', 'R3: 2. Insert the left side hard top panel with the latches facing upward and the right side Freedom Top panel with the latches facing downward.', 'R4: 3. Ensure the front panel latch is closed prior to inserting the panel into the bag.', 'R5: 4. Unfold the outer flap and zip the hard top bag closed.', 'R6: 5. Store the Freedom Top panels bag in a safe location.', 'R7: 6. Use the pouch located on the front of the bag to store the provided hard top edge protectors when the hard top is not installed on the vehicle.'] | {'R1': 'Supported', 'R2': 'Supported', 'R3': 'Supported', 'R4': 'Supported', 'R5': 'Supported', 'R6': 'Supported', 'R7': 'Supported'} | No | false | 1 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
About the hard top panel storage bag, do you have any tips about its usage?
Manual information:
Hard Top Panel(s) Storage Bag — If Equipped The Freedom Top panels storage bag allows you to store your hard top panels. The storage bag contains two compartments. Lay the bag for the panels down so the loops and hooks are facing upward. Unzip the bag and fold back the outer flap. Insert the left side hard top panel into the bag with the latches facing upward. Unfold the black panel divider (ensure the divider is lying flat). Insert the right side Freedom Top panel into the bag with the latches facing downward. Note: ensure the front panel latch is closed prior to inserting the panel into the bag. Unfold the outer flap and zip the hard top bag closed. Step four store the freedom top panels bag in a safe location. Note: Ensure the front panel latch is closed prior to inserting the panel into the panels bag. There is a pouch located on the front of the bag to store the provided hard top edge protectors that are used when the hard top is not installed on the vehicle.
Answer to user's question:
|
dev_9 | Ensemble Retriever (Base) | I found the top is relatively low today. Is it because of the freezing temperature? | Lowering the soft top lowering the soft top ¹ use this qr code to access your digital experience. If the temperature is below 72°F (24°C) and/or the top has been folded down for a period of time, the top will appear to have shrunk when you raise it, making it difficult to put up. This is caused by a natural contraction of the vinyl or acrylic materials of the fabric top. Place the vehicle in a warm area. Pull steadily on the top fabric. The vinyl will stretch back to its original size and the top can then be installed. If the temperature is 41°F (5°C) or below, do not attempt to put the top down or roll the rear or side curtains. WARNING: Do not drive the vehicle with the rear window up/removed unless the quarter windows are also removed. Dangerous exhaust gases could enter the vehicle causing harm to the driver and passengers. The fabric quarter windows and fabric top are designed only for protection against the elements. Do not rely on them to contain occupants within the vehicle or to protect against injury during an accident. Remember, always wear seat belts. Make sure hands and fingers are clear of all pinch points when installing and removing the soft top. The lift assist mechanism and side bows may cause serious injury if fingers or hands get caught in between. CAUTION: The soft top is not designed to carry any additional loads such as roof racks, spare tires, building, hunting or camping supplies, and/or luggage, etc. Also, it was not designed as a structural member of the vehicle and, thus, cannot properly carry any additional loads other than environmental (rain, snow, etc.). CAUTION: Do not run a fabric top through an automatic car wash. Window scratches and wax buildup may result. Do not lower the top when the temperature is below 41°F (5°C). Damage to the top may result. Do not move your vehicle until the top has been either fully attached to the windshield frame, or fully lowered. Follow the proper steps for cleaning and caring for your vehicle’s fabric topDo not use any tools (screwdrivers, etc.) to pry or force any of the clamps, clips, or retainers securing the soft top. Do not force or pry the soft top framework when opening or closing. Damage to the top may result. Failure to follow these cautions may cause interior water damage, stains, or mildew on the top material: It is recommended that the top be free of water prior to opening it. Operating the top, opening a door or lowering a window while the top is wet may allow water to drip into the vehicle's interior. Careless handling and storage of the soft top may damage the seals, causing water to leak into the vehicle's interior. The soft top must be positioned properly to ensure sealing. Improper installation can cause water to leak into the vehicle's interior. | It is possible that the top appears to be relatively low due to the freezing temperature causing the vinyl or acrylic materials of the fabric top to contract. However, it is recommended not to attempt to put the top down or roll the rear or side curtains if the temperature is 41°F (5°C) or below, as damage to the top may result. It is also important to follow the proper steps for cleaning and caring for the vehicle's fabric top to prevent damage and leaks. | ['R1: It is possible that the top appears to be relatively low due to the freezing temperature causing the vinyl or acrylic materials of the fabric top to contract.', 'R2: However, it is recommended not to attempt to put the top down or roll the rear or side curtains if the temperature is 41°F (5°C) or below, as damage to the top may result.', "R3: It is also important to follow the proper steps for cleaning and caring for the vehicle's fabric top to prevent damage and leaks."] | {'R1': 'Supported', 'R2': 'Supported', 'R3': 'Supported'} | No | false | 1 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
I found the top is relatively low today. Is it because of the freezing temperature?
Manual information:
Lowering the soft top lowering the soft top ¹ use this qr code to access your digital experience. If the temperature is below 72°F (24°C) and/or the top has been folded down for a period of time, the top will appear to have shrunk when you raise it, making it difficult to put up. This is caused by a natural contraction of the vinyl or acrylic materials of the fabric top. Place the vehicle in a warm area. Pull steadily on the top fabric. The vinyl will stretch back to its original size and the top can then be installed. If the temperature is 41°F (5°C) or below, do not attempt to put the top down or roll the rear or side curtains. WARNING: Do not drive the vehicle with the rear window up/removed unless the quarter windows are also removed. Dangerous exhaust gases could enter the vehicle causing harm to the driver and passengers. The fabric quarter windows and fabric top are designed only for protection against the elements. Do not rely on them to contain occupants within the vehicle or to protect against injury during an accident. Remember, always wear seat belts. Make sure hands and fingers are clear of all pinch points when installing and removing the soft top. The lift assist mechanism and side bows may cause serious injury if fingers or hands get caught in between. CAUTION: The soft top is not designed to carry any additional loads such as roof racks, spare tires, building, hunting or camping supplies, and/or luggage, etc. Also, it was not designed as a structural member of the vehicle and, thus, cannot properly carry any additional loads other than environmental (rain, snow, etc.). CAUTION: Do not run a fabric top through an automatic car wash. Window scratches and wax buildup may result. Do not lower the top when the temperature is below 41°F (5°C). Damage to the top may result. Do not move your vehicle until the top has been either fully attached to the windshield frame, or fully lowered. Follow the proper steps for cleaning and caring for your vehicle’s fabric topDo not use any tools (screwdrivers, etc.) to pry or force any of the clamps, clips, or retainers securing the soft top. Do not force or pry the soft top framework when opening or closing. Damage to the top may result. Failure to follow these cautions may cause interior water damage, stains, or mildew on the top material: It is recommended that the top be free of water prior to opening it. Operating the top, opening a door or lowering a window while the top is wet may allow water to drip into the vehicle's interior. Careless handling and storage of the soft top may damage the seals, causing water to leak into the vehicle's interior. The soft top must be positioned properly to ensure sealing. Improper installation can cause water to leak into the vehicle's interior.
Answer to user's question:
|
dev_10 | Lucene Search | I found the top is relatively low today. Is it because of the freezing temperature? | Adding Washer Fluid The fluid reservoir is located in the engine compartment. Be sure to check the fluid level at regular intervals. Fill the reservoir with windshield washer solvent only (not radiator antifreeze). When refilling the washer fluid reservoir, take some washer fluid and apply it to a cloth or towel and wipe clean the wiper blades; this will help blade performance. To prevent freeze-up of your windshield washer system in cold weather, select a solution or mixture that meets or exceeds the temperature range of your climate. This rating information can be found on most washer fluid containers. WARNING: Commercial windshield washer solvents are flammable. They could ignite and burn you. Care must be exercised when filling or working around the washer solution. | It's possible that the freezing temperature caused the fluid level to decrease, as the fluid may have frozen and expanded, causing it to overflow or leak out. It's important to check the fluid level regularly and use a solution or mixture that meets or exceeds the temperature range of your climate to prevent freeze-up of your windshield washer system. | ["R1: It's possible that the freezing temperature caused the fluid level to decrease, as the fluid may have frozen and expanded, causing it to overflow or leak out.", "R2: It's important to check the fluid level regularly and use a solution or mixture that meets or exceeds the temperature range of your climate to prevent freeze-up of your windshield washer system."] | {'R1': 'Supported', 'R2': 'Supported'} | No | false | 1 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
I found the top is relatively low today. Is it because of the freezing temperature?
Manual information:
Adding Washer Fluid The fluid reservoir is located in the engine compartment. Be sure to check the fluid level at regular intervals. Fill the reservoir with windshield washer solvent only (not radiator antifreeze). When refilling the washer fluid reservoir, take some washer fluid and apply it to a cloth or towel and wipe clean the wiper blades; this will help blade performance. To prevent freeze-up of your windshield washer system in cold weather, select a solution or mixture that meets or exceeds the temperature range of your climate. This rating information can be found on most washer fluid containers. WARNING: Commercial windshield washer solvents are flammable. They could ignite and burn you. Care must be exercised when filling or working around the washer solution.
Answer to user's question:
|
dev_11 | Adaptive Ensemble Search | I found the top is relatively low today. Is it because of the freezing temperature? | Lowering the soft top lowering the soft top ¹ use this qr code to access your digital experience. If the temperature is below 72°F (24°C) and/or the top has been folded down for a period of time, the top will appear to have shrunk when you raise it, making it difficult to put up. This is caused by a natural contraction of the vinyl or acrylic materials of the fabric top. Place the vehicle in a warm area. Pull steadily on the top fabric. The vinyl will stretch back to its original size and the top can then be installed. If the temperature is 41°F (5°C) or below, do not attempt to put the top down or roll the rear or side curtains. WARNING: Do not drive the vehicle with the rear window up/removed unless the quarter windows are also removed. Dangerous exhaust gases could enter the vehicle causing harm to the driver and passengers. The fabric quarter windows and fabric top are designed only for protection against the elements. Do not rely on them to contain occupants within the vehicle or to protect against injury during an accident. Remember, always wear seat belts. Make sure hands and fingers are clear of all pinch points when installing and removing the soft top. The lift assist mechanism and side bows may cause serious injury if fingers or hands get caught in between. CAUTION: The soft top is not designed to carry any additional loads such as roof racks, spare tires, building, hunting or camping supplies, and/or luggage, etc. Also, it was not designed as a structural member of the vehicle and, thus, cannot properly carry any additional loads other than environmental (rain, snow, etc.). CAUTION: Do not run a fabric top through an automatic car wash. Window scratches and wax buildup may result. Do not lower the top when the temperature is below 41°F (5°C). Damage to the top may result. Do not move your vehicle until the top has been either fully attached to the windshield frame, or fully lowered. Follow the proper steps for cleaning and caring for your vehicle’s fabric top Do not use any tools (screwdrivers, etc.) to pry or force any of the clamps, clips, or retainers securing the soft top. Do not force or pry the soft top framework when opening or closing. Damage to the top may result. Failure to follow these cautions may cause interior water damage, stains, or mildew on the top material: It is recommended that the top be free of water prior to opening it. Operating the top, opening a door or lowering a window while the top is wet may allow water to drip into the vehicle's interior. Careless handling and storage of the soft top may damage the seals, causing water to leak into the vehicle's interior. The soft top must be positioned properly to ensure sealing. Improper installation can cause water to leak into the vehicle's interior. | It is possible that the low temperature has caused the fabric top to shrink, making it difficult to put up. The contraction of the vinyl or acrylic materials of the fabric top is a natural occurrence in cold temperatures. It is recommended to place the vehicle in a warm area and pull steadily on the top fabric to stretch it back to its original size before installing it. However, it is important to note that if the temperature is 41°F (5°C) or below, you should not attempt to put the top down or roll the rear or side curtains as damage to the top may result. | ['R1: It is possible that the low temperature has caused the fabric top to shrink, making it difficult to put up.', 'R2: The contraction of the vinyl or acrylic materials of the fabric top is a natural occurrence in cold temperatures.', 'R3: It is recommended to place the vehicle in a warm area and pull steadily on the top fabric to stretch it back to its original size before installing it.', 'R4: However, it is important to note that if the temperature is 41°F (5°C) or below, you should not attempt to put the top down or roll the rear or side curtains as damage to the top may result.'] | {'R1': 'Supported', 'R2': 'Supported', 'R3': 'Supported', 'R4': 'Supported'} | No | false | 1 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
I found the top is relatively low today. Is it because of the freezing temperature?
Manual information:
Lowering the soft top lowering the soft top ¹ use this qr code to access your digital experience. If the temperature is below 72°F (24°C) and/or the top has been folded down for a period of time, the top will appear to have shrunk when you raise it, making it difficult to put up. This is caused by a natural contraction of the vinyl or acrylic materials of the fabric top. Place the vehicle in a warm area. Pull steadily on the top fabric. The vinyl will stretch back to its original size and the top can then be installed. If the temperature is 41°F (5°C) or below, do not attempt to put the top down or roll the rear or side curtains. WARNING: Do not drive the vehicle with the rear window up/removed unless the quarter windows are also removed. Dangerous exhaust gases could enter the vehicle causing harm to the driver and passengers. The fabric quarter windows and fabric top are designed only for protection against the elements. Do not rely on them to contain occupants within the vehicle or to protect against injury during an accident. Remember, always wear seat belts. Make sure hands and fingers are clear of all pinch points when installing and removing the soft top. The lift assist mechanism and side bows may cause serious injury if fingers or hands get caught in between. CAUTION: The soft top is not designed to carry any additional loads such as roof racks, spare tires, building, hunting or camping supplies, and/or luggage, etc. Also, it was not designed as a structural member of the vehicle and, thus, cannot properly carry any additional loads other than environmental (rain, snow, etc.). CAUTION: Do not run a fabric top through an automatic car wash. Window scratches and wax buildup may result. Do not lower the top when the temperature is below 41°F (5°C). Damage to the top may result. Do not move your vehicle until the top has been either fully attached to the windshield frame, or fully lowered. Follow the proper steps for cleaning and caring for your vehicle’s fabric top Do not use any tools (screwdrivers, etc.) to pry or force any of the clamps, clips, or retainers securing the soft top. Do not force or pry the soft top framework when opening or closing. Damage to the top may result. Failure to follow these cautions may cause interior water damage, stains, or mildew on the top material: It is recommended that the top be free of water prior to opening it. Operating the top, opening a door or lowering a window while the top is wet may allow water to drip into the vehicle's interior. Careless handling and storage of the soft top may damage the seals, causing water to leak into the vehicle's interior. The soft top must be positioned properly to ensure sealing. Improper installation can cause water to leak into the vehicle's interior.
Answer to user's question:
|
dev_12 | Ensemble Retriever (Base) | What is the distance range that the remote start system can reach? | REMOTE START — IF EQUIPPED (GASOLINE) This system uses the key fob to start the engine conveniently from outside the vehicle while still maintaining security. The system has a range of 328 ft (100 m). Remote Start is used to defrost windows in cold weather, and to reach a comfortable climate in all ambient conditions before the driver enters the vehicle. Note: The vehicle must be equipped with an automatic transmission to be equipped with Remote Start. Obstructions between the vehicle and key fob may reduce this range WARNING: Do not start or run an engine in a closed garage or confined area. Exhaust gas contains carbon monoxide (CO) which is odorless and colorless. Carbon monoxide is poisonous and can cause serious injury or death when inhaled. Keep key fobs away from children. Operation of the Remote Start system, windows, door locks or other controls could cause serious injury or death. | The remote start system has a range of 328 ft (100 m). | ['R1: The remote start system has a range of 328 ft (100 m).'] | {'R1': 'Supported'} | No | false | 1 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
What is the distance range that the remote start system can reach?
Manual information:
REMOTE START — IF EQUIPPED (GASOLINE) This system uses the key fob to start the engine conveniently from outside the vehicle while still maintaining security. The system has a range of 328 ft (100 m). Remote Start is used to defrost windows in cold weather, and to reach a comfortable climate in all ambient conditions before the driver enters the vehicle. Note: The vehicle must be equipped with an automatic transmission to be equipped with Remote Start. Obstructions between the vehicle and key fob may reduce this range WARNING: Do not start or run an engine in a closed garage or confined area. Exhaust gas contains carbon monoxide (CO) which is odorless and colorless. Carbon monoxide is poisonous and can cause serious injury or death when inhaled. Keep key fobs away from children. Operation of the Remote Start system, windows, door locks or other controls could cause serious injury or death.
Answer to user's question:
|
dev_13 | Ensemble Retriever (Base) | how to access the online Owner's Information? | Using your owner’s site your owner’s site website https://www.mopar.com/en-us.html (us residents), or www.mopar.ca (canadian residents) provides you with all the information you need, all in one place. You can track your service history, find recommended accessories for your vehicle, watch videos about your vehicle's features, and easily access your manuals. It is also where you can manage your SiriusXM Guardian™ account. This section will familiarize you with the key elements of the website that will help you get the most of your SiriusXM Guardian™ connected services. For customers in the United States, press the Sign In/Register button and enter your email address and password. For customers in Canada, press the My Vehicle button. Select from “Dashboard”, “Vehicle Health Report”, and “Recalls”. The website will then prompt you to log in using your email address and password. Edit/edit profile: to manage the details of your siriusxm guardian™ account, such as your contact information, password and siriusxm guardian™ pin, click on the edit/edit profile button to access the details of your account. Connected services status: this statement will indicate your siriusxm guardian™-equipped vehicle. Remote commands: for vehicles with an active siriusxm guardian™ subscription, press one of these icons and enter your four-digit siriusxm guardian™ security pin to remotely start (if equipped), lock/unlock doors or sound the horn and flash the lights. | To access the online Owner's Information, you can visit the Your Owner’s Site website at https://www.mopar.com/en-us.html (for US residents) or www.mopar.ca (for Canadian residents). Once on the website, you can track your service history, find recommended accessories for your vehicle, watch videos about your vehicle's features, and easily access your manuals. To log in, US customers can press the Sign In/Register button and enter their email address and password, while Canadian customers can press the My Vehicle button and select from “Dashboard”, “Vehicle Health Report”, and “Recalls”. The website will then prompt you to log in using your email address and password. | ["R1: To access the online Owner's Information, you can visit the Your Owner’s Site website at https://www.mopar.com/en-us.html (for US residents) or www.mopar.ca (for Canadian residents).", "R2: Once on the website, you can track your service history, find recommended accessories for your vehicle, watch videos about your vehicle's features, and easily access your manuals.", 'R3: To log in, US customers can press the Sign In/Register button and enter their email address and password, while Canadian customers can press the My Vehicle button and select from “Dashboard”, “Vehicle Health Report”, and “Recalls”.', 'R4: The website will then prompt you to log in using your email address and password.'] | {'R1': 'Supported', 'R2': 'Supported', 'R3': 'Supported', 'R4': 'Supported'} | No | false | 1 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
how to access the online Owner's Information?
Manual information:
Using your owner’s site your owner’s site website https://www.mopar.com/en-us.html (us residents), or www.mopar.ca (canadian residents) provides you with all the information you need, all in one place. You can track your service history, find recommended accessories for your vehicle, watch videos about your vehicle's features, and easily access your manuals. It is also where you can manage your SiriusXM Guardian™ account. This section will familiarize you with the key elements of the website that will help you get the most of your SiriusXM Guardian™ connected services. For customers in the United States, press the Sign In/Register button and enter your email address and password. For customers in Canada, press the My Vehicle button. Select from “Dashboard”, “Vehicle Health Report”, and “Recalls”. The website will then prompt you to log in using your email address and password. Edit/edit profile: to manage the details of your siriusxm guardian™ account, such as your contact information, password and siriusxm guardian™ pin, click on the edit/edit profile button to access the details of your account. Connected services status: this statement will indicate your siriusxm guardian™-equipped vehicle. Remote commands: for vehicles with an active siriusxm guardian™ subscription, press one of these icons and enter your four-digit siriusxm guardian™ security pin to remotely start (if equipped), lock/unlock doors or sound the horn and flash the lights.
Answer to user's question:
|
dev_14 | Adaptive Ensemble Search | Why is the Transmission Temperature Warning light on? what should I do about it? | Transmission Temperature Warning Light — If Equipped This warning light will illuminate to warn of a high transmission fluid temperature. This may occur with strenuous usage such as trailer towing. If this light turns on, stop the vehicle and run the engine at idle or slightly faster, with the transmission in PARK (P) or NEUTRAL (N), until the light turns off. Once the light turns off, you may continue to drive normally. If Manual transmission equipped, this warning will illuminate to warn of high clutch temperature. This may occur with driver misuse of clutch pedal or resting foot on the clutch pedal or partially engaging the clutch for longer duration. If the light turns on, it will be with an additional CLUTCH HOT message. Stop the vehicle safely and run the engine at idle with transmission gear in NEUTRAL (N) until the light turns off. Once the light turns off, follow the message displayed in the instrument cluster. WARNING: If you continue operating the vehicle when the Transmission Temperature Warning Light is illuminated you could cause the fluid to boil over, come in contact with hot engine or exhaust components and cause a fire. If you continue to operate the vehicle when the CLUTCH HOT message is displayed or Transmission Temperature Warning Light is illuminated, you could cause the clutch to overheat and cause a fire. CAUTION: Continuous driving with the Transmission Temperature Warning Light illuminated will eventually cause severe transmission damage or transmission failure. If you continue to operate the vehicle when the CLUTCH HOT message is displayed or Transmission Temperature Warning Light is illuminated, you could cause the clutch to overheat and cause severe clutch damage, transmission damage or failure. | The Transmission Temperature Warning light is on to warn you of a high transmission fluid temperature, which may occur with strenuous usage such as trailer towing. If the light turns on, you should stop the vehicle and run the engine at idle or slightly faster, with the transmission in PARK (P) or NEUTRAL (N), until the light turns off. Once the light turns off, you may continue to drive normally. However, if you continue operating the vehicle when the Transmission Temperature Warning Light is illuminated, you could cause the fluid to boil over, come in contact with hot engine or exhaust components and cause a fire. Therefore, it is important to take immediate action when the warning light turns on. | ['R1: The Transmission Temperature Warning light is on to warn you of a high transmission fluid temperature, which may occur with strenuous usage such as trailer towing.', 'R2: If the light turns on, you should stop the vehicle and run the engine at idle or slightly faster, with the transmission in PARK (P) or NEUTRAL (N), until the light turns off.', 'R3: Once the light turns off, you may continue to drive normally.', 'R4: However, if you continue operating the vehicle when the Transmission Temperature Warning Light is illuminated, you could cause the fluid to boil over, come in contact with hot engine or exhaust components and cause a fire.', 'R5: Therefore, it is important to take immediate action when the warning light turns on.'] | {'R1': 'Supported', 'R2': 'Supported', 'R3': 'Supported', 'R4': 'Supported', 'R5': 'Supported'} | No | false | 1 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
Why is the Transmission Temperature Warning light on? what should I do about it?
Manual information:
Transmission Temperature Warning Light — If Equipped This warning light will illuminate to warn of a high transmission fluid temperature. This may occur with strenuous usage such as trailer towing. If this light turns on, stop the vehicle and run the engine at idle or slightly faster, with the transmission in PARK (P) or NEUTRAL (N), until the light turns off. Once the light turns off, you may continue to drive normally. If Manual transmission equipped, this warning will illuminate to warn of high clutch temperature. This may occur with driver misuse of clutch pedal or resting foot on the clutch pedal or partially engaging the clutch for longer duration. If the light turns on, it will be with an additional CLUTCH HOT message. Stop the vehicle safely and run the engine at idle with transmission gear in NEUTRAL (N) until the light turns off. Once the light turns off, follow the message displayed in the instrument cluster. WARNING: If you continue operating the vehicle when the Transmission Temperature Warning Light is illuminated you could cause the fluid to boil over, come in contact with hot engine or exhaust components and cause a fire. If you continue to operate the vehicle when the CLUTCH HOT message is displayed or Transmission Temperature Warning Light is illuminated, you could cause the clutch to overheat and cause a fire. CAUTION: Continuous driving with the Transmission Temperature Warning Light illuminated will eventually cause severe transmission damage or transmission failure. If you continue to operate the vehicle when the CLUTCH HOT message is displayed or Transmission Temperature Warning Light is illuminated, you could cause the clutch to overheat and cause severe clutch damage, transmission damage or failure.
Answer to user's question:
|
dev_15 | Ensemble Retriever (Base) | How to use the car's voice recognition system? | Get started the vr button is used to activate/deactivate your voice recognition system. Helpful hints for using Voice Recognition: Reduce background noise. Wind noise and passenger conversations are examples of noise that may impact recognition. Speak clearly at a normal pace and volume while facing straight ahead. Each time you give a Voice Command, first push the VR button, wait until after the beep, then say your Voice Command. You can interrupt the help message or system prompts by pushing the VR button and saying a Voice Command from the current category. | To use the car's voice recognition system, you need to push the VR button to activate it. Reduce background noise, speak clearly at a normal pace and volume while facing straight ahead. Each time you give a Voice Command, first push the VR button, wait until after the beep, then say your Voice Command. You can interrupt the help message or system prompts by pushing the VR button and saying a Voice Command from the current category. | ["R1: To use the car's voice recognition system, you need to push the VR button to activate it.", 'R2: Reduce background noise, speak clearly at a normal pace and volume while facing straight ahead.', 'R3: Each time you give a Voice Command, first push the VR button, wait until after the beep, then say your Voice Command.', 'R4: You can interrupt the help message or system prompts by pushing the VR button and saying a Voice Command from the current category.'] | {'R1': 'Supported', 'R2': 'Supported', 'R3': 'Supported', 'R4': 'Supported'} | No | false | 1 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
How to use the car's voice recognition system?
Manual information:
Get started the vr button is used to activate/deactivate your voice recognition system. Helpful hints for using Voice Recognition: Reduce background noise. Wind noise and passenger conversations are examples of noise that may impact recognition. Speak clearly at a normal pace and volume while facing straight ahead. Each time you give a Voice Command, first push the VR button, wait until after the beep, then say your Voice Command. You can interrupt the help message or system prompts by pushing the VR button and saying a Voice Command from the current category.
Answer to user's question:
|
dev_17 | Adaptive Ensemble Search | How to use the car's voice recognition system? | Start using Uconnect Voice Recognition with these helpful quick tips. It provides the key Voice Commands and tips you need to know to control your vehicle’s Voice Recognition (VR) system. When the Voice button is pressed on the touchscreen, the system displays the options related to the vehicle’s Voice Recognition feature. Depending on the vehicle’s options, feature settings may vary. Notice the visual cues that inform you of your Voice Recognition system’s status. Push and hold the VR button on the steering wheel to activate a Siri voice recognition session. Apple CarPlay® allows you to use Siri to send or reply to text messages. Siri can also read incoming text messages, but drivers will not be able to read messages, as everything is done via voice. Reduce background noise. Wind noise and passenger conversations are examples of noise that may impact recognition. Speak clearly at a normal pace and volume while facing straight ahead. Each time you give a Voice Command, first push the VR button, wait until after the beep, then say your Voice Command. You can interrupt the help message or system prompts by pushing the VR button and saying a Voice Command from the current category. Android Auto™ allows you to use your voice to interact with its best-in-class speech technology through your vehicle’s voice recognition system, and use your smartphone’s data plan to project your Android™-powered smartphone and a number of its apps onto your Uconnect touchscreen. Connect your Android™ 6.0 or higher to one of the media USB ports, using the factory-provided USB cable, and press the new Android Auto™ icon that replaces your Phone icon on the main menu bar to begin Android Auto™. Push and hold the VR button on the steering wheel, or press and hold the Microphone icon within Android Auto™, to activate its VR, which recognizes natural voice commands, to use a list of your smartphone’s features: Push and hold the Voice Recognition (VR) button on the steering wheel until the beep or tap the Microphone icon to ask Google to take you to a desired destination by voice. You can also touch the Navigation icon in Android Auto™ to access other navigation apps. | To use your car's voice recognition system, you can follow these steps: 1. Press the Voice button on the touchscreen to display the options related to the vehicle's Voice Recognition feature. 2. Push and hold the VR button on the steering wheel to activate a Siri voice recognition session or press and hold the Microphone icon within Android Auto™ to activate its VR. 3. Speak clearly at a normal pace and volume while facing straight ahead, and reduce background noise. 4. Wait until after the beep, then say your Voice Command. 5. You can interrupt the help message or system prompts by pushing the VR button and saying a Voice Command from the current category. 6. Depending on your vehicle's options, feature settings may vary, and notice the visual cues that inform you of your Voice Recognition system's status. | ["R1: To use your car's voice recognition system, you can follow these steps: 1.", "R2: Press the Voice button on the touchscreen to display the options related to the vehicle's Voice Recognition feature.", 'R3: 2. Push and hold the VR button on the steering wheel to activate a Siri voice recognition session or press and hold the Microphone icon within Android Auto™ to activate its VR.', 'R4: 3. Speak clearly at a normal pace and volume while facing straight ahead, and reduce background noise.', 'R5: 4. Wait until after the beep, then say your Voice Command.', 'R6: 5. You can interrupt the help message or system prompts by pushing the VR button and saying a Voice Command from the current category.', "R7: 6. Depending on your vehicle's options, feature settings may vary, and notice the visual cues that inform you of your Voice Recognition system's status."] | {'R1': 'Supported', 'R2': 'Supported', 'R3': 'Supported', 'R4': 'Supported', 'R5': 'Supported', 'R6': 'Supported', 'R7': 'Supported'} | No | false | 1 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
How to use the car's voice recognition system?
Manual information:
Start using Uconnect Voice Recognition with these helpful quick tips. It provides the key Voice Commands and tips you need to know to control your vehicle’s Voice Recognition (VR) system. When the Voice button is pressed on the touchscreen, the system displays the options related to the vehicle’s Voice Recognition feature. Depending on the vehicle’s options, feature settings may vary. Notice the visual cues that inform you of your Voice Recognition system’s status. Push and hold the VR button on the steering wheel to activate a Siri voice recognition session. Apple CarPlay® allows you to use Siri to send or reply to text messages. Siri can also read incoming text messages, but drivers will not be able to read messages, as everything is done via voice. Reduce background noise. Wind noise and passenger conversations are examples of noise that may impact recognition. Speak clearly at a normal pace and volume while facing straight ahead. Each time you give a Voice Command, first push the VR button, wait until after the beep, then say your Voice Command. You can interrupt the help message or system prompts by pushing the VR button and saying a Voice Command from the current category. Android Auto™ allows you to use your voice to interact with its best-in-class speech technology through your vehicle’s voice recognition system, and use your smartphone’s data plan to project your Android™-powered smartphone and a number of its apps onto your Uconnect touchscreen. Connect your Android™ 6.0 or higher to one of the media USB ports, using the factory-provided USB cable, and press the new Android Auto™ icon that replaces your Phone icon on the main menu bar to begin Android Auto™. Push and hold the VR button on the steering wheel, or press and hold the Microphone icon within Android Auto™, to activate its VR, which recognizes natural voice commands, to use a list of your smartphone’s features: Push and hold the Voice Recognition (VR) button on the steering wheel until the beep or tap the Microphone icon to ask Google to take you to a desired destination by voice. You can also touch the Navigation icon in Android Auto™ to access other navigation apps.
Answer to user's question:
|
dev_18 | Ensemble Retriever (Base) | what's the step-by-step procedure for fuel filler cap replacement? | Fuel Filler Cap The fuel filler cap is located on the left side of the vehicle. To access the fuel filler cap, push on the fuel filler door to unlatch it. To close the fuel filler door, push on it a second time. If the fuel filler cap is lost or damaged, be sure the replacement cap is the correct one for this vehicle. Open the fuel filler door. Fuel filler door remove the fuel cap by rotating it counterclockwise. Fuel filler cap fully insert the gasoline nozzle into the filler pipe. Fill the vehicle with fuel. When the fuel nozzle “clicks” or shuts off, the fuel tank is full. Wait five seconds before removing the fuel nozzle to allow excess fuel to drain from nozzle. Remove gasoline nozzle, reinstall fuel cap and close the fuel filler door. WARNING: Never have any smoking materials lit in or near the vehicle when the fuel door is open or the tank is being filled. Never add fuel when the engine is running. This is in violation of most state and federal fire regulations and may cause the Malfunction Indicator Light (MIL) to turn on. A fire may result if fuel is pumped into a portable container that is inside of a vehicle. You could be burned. Always place fuel containers on the ground while filling. CAUTION: Damage to the fuel system or emission control system could result from using an improper fuel filler cap. A poorly fitting cap could let impurities into the fuel system. Also, a poorly fitting aftermarket cap can cause the Malfunction Indicator Light (MIL) to illuminate, due to fuel vapors escaping from the system. To avoid fuel spillage and overfilling, do not “top off” the fuel tank after filling. Note: When the fuel nozzle “clicks” or shuts off, the fuel tank is full. Tighten the fuel filler cap about a quarter turn until you hear one click. This is an indication that the cap is properly tightened. If the fuel filler cap is not tightened properly, the MIL will come on. Be sure the cap is tightened every time the vehicle is refueled. | Here are the step-by-step procedures for fuel filler cap replacement: 1. Open the fuel filler door by pushing on it to unlatch it. 2. Remove the fuel cap by rotating it counterclockwise. 3. Check to make sure the replacement cap is the correct one for the vehicle. 4. Fully insert the replacement fuel filler cap into the filler pipe. 5. Tighten the fuel filler cap about a quarter turn until you hear one click. This is an indication that the cap is properly tightened. 6. Close the fuel filler door by pushing on it a second time. It is important to use the correct replacement fuel filler cap to avoid damage to the fuel system or emission control system. Also, be sure to tighten the cap properly every time the vehicle is refueled to prevent the Malfunction Indicator Light (MIL) from coming on. | ['R1: Here are the step-by-step procedures for fuel filler cap replacement: 1.', 'R2: Open the fuel filler door by pushing on it to unlatch it.', 'R3: 2. Remove the fuel cap by rotating it counterclockwise.', 'R4: 3. Check to make sure the replacement cap is the correct one for the vehicle.', 'R5: 4. Fully insert the replacement fuel filler cap into the filler pipe.', 'R6: 5. Tighten the fuel filler cap about a quarter turn until you hear one click.', 'R7: This is an indication that the cap is properly tightened.', 'R8: 6. Close the fuel filler door by pushing on it a second time.', 'R9: It is important to use the correct replacement fuel filler cap to avoid damage to the fuel system or emission control system.', 'R10: Also, be sure to tighten the cap properly every time the vehicle is refueled to prevent the Malfunction Indicator Light (MIL) from coming on.'] | {'R1': 'Neither', 'R2': 'Supported', 'R3': 'Neither', 'R4': 'Neither', 'R5': 'Neither', 'R6': 'Supported', 'R7': 'Supported', 'R8': 'Supported', 'R9': 'Supported', 'R10': 'Neither'} | Yes | false | 0 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
what's the step-by-step procedure for fuel filler cap replacement?
Manual information:
Fuel Filler Cap The fuel filler cap is located on the left side of the vehicle. To access the fuel filler cap, push on the fuel filler door to unlatch it. To close the fuel filler door, push on it a second time. If the fuel filler cap is lost or damaged, be sure the replacement cap is the correct one for this vehicle. Open the fuel filler door. Fuel filler door remove the fuel cap by rotating it counterclockwise. Fuel filler cap fully insert the gasoline nozzle into the filler pipe. Fill the vehicle with fuel. When the fuel nozzle “clicks” or shuts off, the fuel tank is full. Wait five seconds before removing the fuel nozzle to allow excess fuel to drain from nozzle. Remove gasoline nozzle, reinstall fuel cap and close the fuel filler door. WARNING: Never have any smoking materials lit in or near the vehicle when the fuel door is open or the tank is being filled. Never add fuel when the engine is running. This is in violation of most state and federal fire regulations and may cause the Malfunction Indicator Light (MIL) to turn on. A fire may result if fuel is pumped into a portable container that is inside of a vehicle. You could be burned. Always place fuel containers on the ground while filling. CAUTION: Damage to the fuel system or emission control system could result from using an improper fuel filler cap. A poorly fitting cap could let impurities into the fuel system. Also, a poorly fitting aftermarket cap can cause the Malfunction Indicator Light (MIL) to illuminate, due to fuel vapors escaping from the system. To avoid fuel spillage and overfilling, do not “top off” the fuel tank after filling. Note: When the fuel nozzle “clicks” or shuts off, the fuel tank is full. Tighten the fuel filler cap about a quarter turn until you hear one click. This is an indication that the cap is properly tightened. If the fuel filler cap is not tightened properly, the MIL will come on. Be sure the cap is tightened every time the vehicle is refueled.
Answer to user's question:
|
dev_19 | Lucene Search | what's the step-by-step procedure for fuel filler cap replacement? | Fuel Filler Cap The fuel filler cap is located on the left side of the vehicle. To access the fuel filler cap, push on the fuel filler door to unlatch it. To close the fuel filler door, push on it a second time. If the fuel filler cap is lost or damaged, be sure the replacement cap is the correct one for this vehicle. Open the fuel filler door. Fuel filler door remove the fuel cap by rotating it counterclockwise. Fuel filler cap fully insert the gasoline nozzle into the filler pipe. Fill the vehicle with fuel. When the fuel nozzle “clicks” or shuts off, the fuel tank is full. Wait five seconds before removing the fuel nozzle to allow excess fuel to drain from nozzle. Remove gasoline nozzle, reinstall fuel cap and close the fuel filler door. WARNING: Never have any smoking materials lit in or near the vehicle when the fuel door is open or the tank is being filled. Never add fuel when the engine is running. This is in violation of most state and federal fire regulations and may cause the Malfunction Indicator Light (MIL) to turn on. A fire may result if fuel is pumped into a portable container that is inside of a vehicle. You could be burned. Always place fuel containers on the ground while filling. CAUTION: Damage to the fuel system or emission control system could result from using an improper fuel filler cap. A poorly fitting cap could let impurities into the fuel system. Also, a poorly fitting aftermarket cap can cause the Malfunction Indicator Light (MIL) to illuminate, due to fuel vapors escaping from the system. To avoid fuel spillage and overfilling, do not “top off” the fuel tank after filling. Note: When the fuel nozzle “clicks” or shuts off, the fuel tank is full. Tighten the fuel filler cap about a quarter turn until you hear one click. This is an indication that the cap is properly tightened. If the fuel filler cap is not tightened properly, the MIL will come on. Be sure the cap is tightened every time the vehicle is refueled. | 1. Open the fuel filler door by pushing on it to unlatch it. 2. Remove the fuel cap by rotating it counterclockwise. 3. Check that the replacement cap is the correct one for the vehicle. 4. Fully insert the replacement fuel filler cap into the filler pipe. 5. Tighten the fuel filler cap about a quarter turn until you hear one click. This is an indication that the cap is properly tightened. 6. Close the fuel filler door by pushing on it a second time. | ['R1: 1. Open the fuel filler door by pushing on it to unlatch it.', 'R2: 2. Remove the fuel cap by rotating it counterclockwise.', 'R3: 3. Check that the replacement cap is the correct one for the vehicle.', 'R4: 4. Fully insert the replacement fuel filler cap into the filler pipe.', 'R5: 5. Tighten the fuel filler cap about a quarter turn until you hear one click.', 'R6: This is an indication that the cap is properly tightened.', 'R7: 6. Close the fuel filler door by pushing on it a second time.'] | {'R1': 'Supported', 'R2': 'Supported', 'R3': 'Supported', 'R4': 'Supported', 'R5': 'Neither', 'R6': 'Supported', 'R7': 'Supported'} | No | false | 1 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
what's the step-by-step procedure for fuel filler cap replacement?
Manual information:
Fuel Filler Cap The fuel filler cap is located on the left side of the vehicle. To access the fuel filler cap, push on the fuel filler door to unlatch it. To close the fuel filler door, push on it a second time. If the fuel filler cap is lost or damaged, be sure the replacement cap is the correct one for this vehicle. Open the fuel filler door. Fuel filler door remove the fuel cap by rotating it counterclockwise. Fuel filler cap fully insert the gasoline nozzle into the filler pipe. Fill the vehicle with fuel. When the fuel nozzle “clicks” or shuts off, the fuel tank is full. Wait five seconds before removing the fuel nozzle to allow excess fuel to drain from nozzle. Remove gasoline nozzle, reinstall fuel cap and close the fuel filler door. WARNING: Never have any smoking materials lit in or near the vehicle when the fuel door is open or the tank is being filled. Never add fuel when the engine is running. This is in violation of most state and federal fire regulations and may cause the Malfunction Indicator Light (MIL) to turn on. A fire may result if fuel is pumped into a portable container that is inside of a vehicle. You could be burned. Always place fuel containers on the ground while filling. CAUTION: Damage to the fuel system or emission control system could result from using an improper fuel filler cap. A poorly fitting cap could let impurities into the fuel system. Also, a poorly fitting aftermarket cap can cause the Malfunction Indicator Light (MIL) to illuminate, due to fuel vapors escaping from the system. To avoid fuel spillage and overfilling, do not “top off” the fuel tank after filling. Note: When the fuel nozzle “clicks” or shuts off, the fuel tank is full. Tighten the fuel filler cap about a quarter turn until you hear one click. This is an indication that the cap is properly tightened. If the fuel filler cap is not tightened properly, the MIL will come on. Be sure the cap is tightened every time the vehicle is refueled.
Answer to user's question:
|
dev_20 | Adaptive Ensemble Search | What's function of the connection port in my car? | ONLY an authorized service technician should connect equipment to the OBD II connection port in order to read the VIN, diagnose, or service your vehicle. If unauthorized equipment is connected to the OBD II connection port, such as a driver-behavior tracking device, it may: Be possible that vehicle systems, including safety related systems, could be impaired or a loss of vehicle control could occur that may result in an accident involving serious injury or death. Access, or allow others to access, information stored in your vehicle systems, including personal information. Your vehicle is required to have an OBD II and a connection port to allow access to information related to the performance of your emissions controls. Authorized service technicians may need to access this information to assist with the diagnosis and service of your vehicle and emissions systemApple CarPlay® uses a USB connection while Android Auto™ uses both USB and Bluetooth® connections to function. The connected device is unavailable to other devices when connected using Android Auto™ or Apple CarPlay®. Depending on your vehicle’s specifications, the USB port may contain playback capabilities and will allow you to play music from your smartphone device or USB devices through your vehicle’s sound system. 1 — Reset Button 2 — Battery Status Button 3 — Service/Diagnostic Port (Non-charging, Non-customer use port) 4 — Type A USB Charging Port 5 — Battery Status LED 6 — Speaker Charging Port 7 — AUX Port The Smart Charging USB ports provide power to your device up to an hour after the vehicle is turned off. | The connection port in your car is the OBD II port, which is used by authorized service technicians to read the VIN, diagnose, or service your vehicle. It allows access to information related to the performance of your emissions controls, which may be needed for diagnosis and service of your vehicle and emissions system. It is important to note that connecting unauthorized equipment to this port, such as a driver-behavior tracking device, may impair vehicle systems, including safety-related systems, and could result in an accident involving serious injury or death. Additionally, the USB port in your car may have playback capabilities and allow you to play music from your smartphone device or USB devices through your vehicle's sound system. The Smart Charging USB ports provide power to your device up to an hour after the vehicle is turned off. | ['R1: The connection port in your car is the OBD II port, which is used by authorized service technicians to read the VIN, diagnose, or service your vehicle.', 'R2: It allows access to information related to the performance of your emissions controls, which may be needed for diagnosis and service of your vehicle and emissions system.', 'R3: It is important to note that connecting unauthorized equipment to this port, such as a driver-behavior tracking device, may impair vehicle systems, including safety-related systems, and could result in an accident involving serious injury or death.', "R4: Additionally, the USB port in your car may have playback capabilities and allow you to play music from your smartphone device or USB devices through your vehicle's sound system.", 'R5: The Smart Charging USB ports provide power to your device up to an hour after the vehicle is turned off.'] | {'R1': 'Supported', 'R2': 'Supported', 'R3': 'Supported', 'R4': 'Supported', 'R5': 'Supported'} | No | false | 1 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
What's function of the connection port in my car?
Manual information:
ONLY an authorized service technician should connect equipment to the OBD II connection port in order to read the VIN, diagnose, or service your vehicle. If unauthorized equipment is connected to the OBD II connection port, such as a driver-behavior tracking device, it may: Be possible that vehicle systems, including safety related systems, could be impaired or a loss of vehicle control could occur that may result in an accident involving serious injury or death. Access, or allow others to access, information stored in your vehicle systems, including personal information. Your vehicle is required to have an OBD II and a connection port to allow access to information related to the performance of your emissions controls. Authorized service technicians may need to access this information to assist with the diagnosis and service of your vehicle and emissions systemApple CarPlay® uses a USB connection while Android Auto™ uses both USB and Bluetooth® connections to function. The connected device is unavailable to other devices when connected using Android Auto™ or Apple CarPlay®. Depending on your vehicle’s specifications, the USB port may contain playback capabilities and will allow you to play music from your smartphone device or USB devices through your vehicle’s sound system. 1 — Reset Button 2 — Battery Status Button 3 — Service/Diagnostic Port (Non-charging, Non-customer use port) 4 — Type A USB Charging Port 5 — Battery Status LED 6 — Speaker Charging Port 7 — AUX Port The Smart Charging USB ports provide power to your device up to an hour after the vehicle is turned off.
Answer to user's question:
|
dev_21 | Ensemble Retriever | What's function of the connection port in my car? | AUX/USB Control The Media Hub is located on the instrument panel, below the climate controls. Behind the media hub access door, the Media Hub contains one AUX port, a Type C USB port and one standard USB port. Both USB ports allow you to play music from smartphones or USB devices through the vehicle’s sound system. Plugging in a smartphone device to a USB port may activate Android Auto™ or Apple CarPlay® features, if equipped. For further information, refer to the Uconnect Radio Instruction Manual or The Smart Charging USB ports provide power to your device up to an hour after the vehicle is turned off. For example, if a device is plugged into the Type A USB port and another device is plugged into the Type C USB port, a message will appear and allow you to select which device to use. Located inside the center console, a second USB port allows you to only charge USB devices. Depending on your vehicle’s specifications, the USB port may contain playback capabilities and will allow you to play music from your smartphone device or USB devices through your vehicle’s sound system. A third and fourth USB port are located behind the center console, above the power inverter. Both ports are charge only. When a new device or smartphone is plugged into the USB ports, one of the following message will display depending on the device being utilized: “A new device is now connected. Previous connection was lost”. “(Phone Name) now connected. Previous connection was lost”. “Another device is in use through the same USB port. Please disconnect the first device to use the second device”. Note: Once a device is connected to the USB port, it will begin charging and is ready for use with the system. Type C and Type A charge-only USB ports can be used at the same time but cannot be used simultaneously while playing media. When both Type C and Type A charge-only USB ports are in use they will be charged at a reduced rate. Both ports share a single data connection. The user cannot switch between Type A and Type C. Note: Charge unsupported devices with the Charge Only USB ports. If an unsupported device is plugged into a Media USB port, a message will display on the touchscreen that the device is not supported by the system. WARNING: Do not plug in or remove the external device while driving. Failure to follow this warning could result in a collision. Onboard Diagnostic System (OBD II) Cybersecurity Your vehicle is required to have an OBD II and a connection port to allow access to information related to the performance of your emissions controls. Authorized service technicians may need to access this information to assist with the diagnosis and service of your vehicle and emissions systemWARNING: ONLY an authorized service technician should connect equipment to the OBD II connection port in order to read the VIN, diagnose, or service your vehicle. If unauthorized equipment is connected to the obd ii connection port, such as a driver-behavior tracking device, it may: be possible that vehicle systems, including safety related systems, could be impaired or a loss of vehicle control could occur that may result in an accident involving serious injury or death. Access, or allow others to access, information stored in your vehicle systems, including personal information. | The connection port in your car is the OBD II port, which allows authorized service technicians to access information related to the performance of your emissions controls. This information may be needed to diagnose and service your vehicle and emissions system. It is important to note that only authorized service technicians should connect equipment to the OBD II connection port to avoid impairing vehicle systems or accessing personal information. | ['R1: The connection port in your car is the OBD II port, which allows authorized service technicians to access information related to the performance of your emissions controls.', 'R2: This information may be needed to diagnose and service your vehicle and emissions system.', 'R3: It is important to note that only authorized service technicians should connect equipment to the OBD II connection port to avoid impairing vehicle systems or accessing personal information.'] | {'R1': 'Supported', 'R2': 'Supported', 'R3': 'Supported'} | No | false | 1 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
What's function of the connection port in my car?
Manual information:
AUX/USB Control The Media Hub is located on the instrument panel, below the climate controls. Behind the media hub access door, the Media Hub contains one AUX port, a Type C USB port and one standard USB port. Both USB ports allow you to play music from smartphones or USB devices through the vehicle’s sound system. Plugging in a smartphone device to a USB port may activate Android Auto™ or Apple CarPlay® features, if equipped. For further information, refer to the Uconnect Radio Instruction Manual or The Smart Charging USB ports provide power to your device up to an hour after the vehicle is turned off. For example, if a device is plugged into the Type A USB port and another device is plugged into the Type C USB port, a message will appear and allow you to select which device to use. Located inside the center console, a second USB port allows you to only charge USB devices. Depending on your vehicle’s specifications, the USB port may contain playback capabilities and will allow you to play music from your smartphone device or USB devices through your vehicle’s sound system. A third and fourth USB port are located behind the center console, above the power inverter. Both ports are charge only. When a new device or smartphone is plugged into the USB ports, one of the following message will display depending on the device being utilized: “A new device is now connected. Previous connection was lost”. “(Phone Name) now connected. Previous connection was lost”. “Another device is in use through the same USB port. Please disconnect the first device to use the second device”. Note: Once a device is connected to the USB port, it will begin charging and is ready for use with the system. Type C and Type A charge-only USB ports can be used at the same time but cannot be used simultaneously while playing media. When both Type C and Type A charge-only USB ports are in use they will be charged at a reduced rate. Both ports share a single data connection. The user cannot switch between Type A and Type C. Note: Charge unsupported devices with the Charge Only USB ports. If an unsupported device is plugged into a Media USB port, a message will display on the touchscreen that the device is not supported by the system. WARNING: Do not plug in or remove the external device while driving. Failure to follow this warning could result in a collision. Onboard Diagnostic System (OBD II) Cybersecurity Your vehicle is required to have an OBD II and a connection port to allow access to information related to the performance of your emissions controls. Authorized service technicians may need to access this information to assist with the diagnosis and service of your vehicle and emissions systemWARNING: ONLY an authorized service technician should connect equipment to the OBD II connection port in order to read the VIN, diagnose, or service your vehicle. If unauthorized equipment is connected to the obd ii connection port, such as a driver-behavior tracking device, it may: be possible that vehicle systems, including safety related systems, could be impaired or a loss of vehicle control could occur that may result in an accident involving serious injury or death. Access, or allow others to access, information stored in your vehicle systems, including personal information.
Answer to user's question:
|
dev_22 | Adaptive Ensemble Search | The brake light remains on after the parking brake is disengaged. What goes wrong? | If the light remains on when the parking brake has been disengaged, and the fluid level is at the full mark on the master cylinder reservoir, it indicates a possible brake hydraulic system malfunction or that a problem with the Brake Booster has been detected by the Anti-Lock Brake System (ABS) / Electronic Stability Control (ESC) system. In this case, the light will remain on until the condition has been corrected. If the problem is related to the brake booster, the ABS pump will run when applying the brake, and a brake pedal pulsation may be felt during each stop. If the Brake Warning Light remains on with the parking brake released, a brake system malfunction is indicated. Have the brake system serviced by an authorized dealer immediately. This warning light monitors various brake functions, including brake fluid level and parking brake application. If the brake light turns on it may indicate that the parking brake is applied, that the brake fluid level is low, or that there is a problem with the Anti-Lock Brake System reservoir. When the parking brake is applied and the automatic transmission is placed in gear, the Brake Warning Light will flash. If vehicle speed is detected, a chime will sound to alert the driver. Fully release the parking brake before attempting to move the vehicle. This light only shows that the parking brake is applied. It does not show the degree of brake application. The light also will turn on when the parking brake is applied with the ignition switch in the ON/RUN position. Operation of the Brake Warning Light can be checked by turning the ignition switch from the OFF position to the ON/RUN position. The light should illuminate for approximately two seconds. The light should then turn off unless the parking brake is applied or a brake fault is detected. If the light does not illuminate, have the light inspected by an authorized dealer. When the parking brake is applied with the ignition switch ON, the Brake Warning Light in the instrument cluster will illuminate. If the headlights or parking lights are left on after the ignition is placed in the OFF position, the vehicle will chime when the driver’s door is opened. Vehicle parking brake is applied Stability event occurs Gear selector is moved out of DRIVE Engine overspeed occurs Clutch pedal is pressed (manual transmission only) Vehicle is operating at a low RPM (manual transmission only) Always apply the parking brake. Press and hold the brake pedal while pushing the ENGINE START/STOP button once. A delay of the start of up to five seconds is possible under very cold conditions. The “Wait to Start” telltale will be illuminated during the preheat process. When the engine “Wait To Start” telltale turns off the engine will automatically crank. If the Water in Fuel Indicator Light remains on, DO NOT START the engine before you drain the water from the fuel filters to avoid engine damage The system will automatically engage the starter to crank the engine. If the vehicle fails to start, the starter will disengage automatically after 25 seconds. If you wish to stop the cranking of the engine prior to the engine starting, push the ENGINE START/STOP button again. Check that the Oil Pressure Warning Light has turned off. release the parking brake | If the brake light remains on after the parking brake is disengaged, it indicates a possible brake hydraulic system malfunction or a problem with the Brake Booster that has been detected by the Anti-Lock Brake System (ABS) / Electronic Stability Control (ESC) system. It could also indicate a brake system malfunction, including low brake fluid level or a problem with the Anti-Lock Brake System reservoir. In this case, the light will remain on until the condition has been corrected. If the problem is related to the brake booster, the ABS pump will run when applying the brake, and a brake pedal pulsation may be felt during each stop. It is recommended to have the brake system serviced by an authorized dealer immediately. | ['R1: If the brake light remains on after the parking brake is disengaged, it indicates a possible brake hydraulic system malfunction or a problem with the Brake Booster that has been detected by the Anti-Lock Brake System (ABS) / Electronic Stability Control (ESC) system.', 'R2: It could also indicate a brake system malfunction, including low brake fluid level or a problem with the Anti-Lock Brake System reservoir.', 'R3: In this case, the light will remain on until the condition has been corrected.', 'R4: If the problem is related to the brake booster, the ABS pump will run when applying the brake, and a brake pedal pulsation may be felt during each stop.', 'R5: It is recommended to have the brake system serviced by an authorized dealer immediately.'] | {'R1': 'Supported', 'R2': 'Supported', 'R3': 'Supported', 'R4': 'Supported', 'R5': 'Supported'} | No | false | 1 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
The brake light remains on after the parking brake is disengaged. What goes wrong?
Manual information:
If the light remains on when the parking brake has been disengaged, and the fluid level is at the full mark on the master cylinder reservoir, it indicates a possible brake hydraulic system malfunction or that a problem with the Brake Booster has been detected by the Anti-Lock Brake System (ABS) / Electronic Stability Control (ESC) system. In this case, the light will remain on until the condition has been corrected. If the problem is related to the brake booster, the ABS pump will run when applying the brake, and a brake pedal pulsation may be felt during each stop. If the Brake Warning Light remains on with the parking brake released, a brake system malfunction is indicated. Have the brake system serviced by an authorized dealer immediately. This warning light monitors various brake functions, including brake fluid level and parking brake application. If the brake light turns on it may indicate that the parking brake is applied, that the brake fluid level is low, or that there is a problem with the Anti-Lock Brake System reservoir. When the parking brake is applied and the automatic transmission is placed in gear, the Brake Warning Light will flash. If vehicle speed is detected, a chime will sound to alert the driver. Fully release the parking brake before attempting to move the vehicle. This light only shows that the parking brake is applied. It does not show the degree of brake application. The light also will turn on when the parking brake is applied with the ignition switch in the ON/RUN position. Operation of the Brake Warning Light can be checked by turning the ignition switch from the OFF position to the ON/RUN position. The light should illuminate for approximately two seconds. The light should then turn off unless the parking brake is applied or a brake fault is detected. If the light does not illuminate, have the light inspected by an authorized dealer. When the parking brake is applied with the ignition switch ON, the Brake Warning Light in the instrument cluster will illuminate. If the headlights or parking lights are left on after the ignition is placed in the OFF position, the vehicle will chime when the driver’s door is opened. Vehicle parking brake is applied Stability event occurs Gear selector is moved out of DRIVE Engine overspeed occurs Clutch pedal is pressed (manual transmission only) Vehicle is operating at a low RPM (manual transmission only) Always apply the parking brake. Press and hold the brake pedal while pushing the ENGINE START/STOP button once. A delay of the start of up to five seconds is possible under very cold conditions. The “Wait to Start” telltale will be illuminated during the preheat process. When the engine “Wait To Start” telltale turns off the engine will automatically crank. If the Water in Fuel Indicator Light remains on, DO NOT START the engine before you drain the water from the fuel filters to avoid engine damage The system will automatically engage the starter to crank the engine. If the vehicle fails to start, the starter will disengage automatically after 25 seconds. If you wish to stop the cranking of the engine prior to the engine starting, push the ENGINE START/STOP button again. Check that the Oil Pressure Warning Light has turned off. release the parking brake
Answer to user's question:
|
dev_23 | Ensemble Retriever (Base) | Can I use gasoline containing methanol? | Gasoline/Oxygenate Blends Some fuel suppliers blend unleaded gasoline with oxygenates such as ethanol. Problems that result from using gasoline containing more than 15% ethanol (E-15) or gasoline containing methanol are not the responsibility of the manufacturer and may void the New Vehicle Limited Warranty. CAUTION: DO NOT use E-85, gasoline containing methanol, or gasoline containing more than 15% ethanol (E-15). Use of these blends may result in starting and drivability problems, damage critical fuel system components, cause emissions to exceed the applicable standard, and/or cause the Malfunction Indicator Light to illuminate. Please observe pump labels as they should clearly communicate if a fuel contains greater than 15% ethanol (E-15). | No, you should not use gasoline containing methanol as it may result in starting and drivability problems, damage critical fuel system components, cause emissions to exceed the applicable standard, and/or cause the Malfunction Indicator Light to illuminate. | ['R1: No, you should not use gasoline containing methanol as it may result in starting and drivability problems, damage critical fuel system components, cause emissions to exceed the applicable standard, and/or cause the Malfunction Indicator Light to illuminate.'] | {'R1': 'Supported'} | No | false | 1 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
Can I use gasoline containing methanol?
Manual information:
Gasoline/Oxygenate Blends Some fuel suppliers blend unleaded gasoline with oxygenates such as ethanol. Problems that result from using gasoline containing more than 15% ethanol (E-15) or gasoline containing methanol are not the responsibility of the manufacturer and may void the New Vehicle Limited Warranty. CAUTION: DO NOT use E-85, gasoline containing methanol, or gasoline containing more than 15% ethanol (E-15). Use of these blends may result in starting and drivability problems, damage critical fuel system components, cause emissions to exceed the applicable standard, and/or cause the Malfunction Indicator Light to illuminate. Please observe pump labels as they should clearly communicate if a fuel contains greater than 15% ethanol (E-15).
Answer to user's question:
|
dev_24 | Lucene Search | Can I use gasoline containing methanol? | Gasoline/Oxygenate Blends Some fuel suppliers blend unleaded gasoline with oxygenates such as ethanol. Problems that result from using gasoline containing more than 15% ethanol (E-15) or gasoline containing methanol are not the responsibility of the manufacturer and may void the New Vehicle Limited Warranty. CAUTION: DO NOT use E-85, gasoline containing methanol, or gasoline containing more than 15% ethanol (E-15). Use of these blends may result in starting and drivability problems, damage critical fuel system components, cause emissions to exceed the applicable standard, and/or cause the Malfunction Indicator Light to illuminate. Please observe pump labels as they should clearly communicate if a fuel contains greater than 15% ethanol (E-15). | No, you should not use gasoline containing methanol as it may result in starting and drivability problems, damage critical fuel system components, cause emissions to exceed the applicable standard, and/or cause the Malfunction Indicator Light to illuminate. It is also important to note that using gasoline containing methanol or more than 15% ethanol (E-15) may void the New Vehicle Limited Warranty. Please observe pump labels as they should clearly communicate if a fuel contains greater than 15% ethanol (E-15). | ['R1: No, you should not use gasoline containing methanol as it may result in starting and drivability problems, damage critical fuel system components, cause emissions to exceed the applicable standard, and/or cause the Malfunction Indicator Light to illuminate.', 'R2: It is also important to note that using gasoline containing methanol or more than 15% ethanol (E-15) may void the New Vehicle Limited Warranty.', 'R3: Please observe pump labels as they should clearly communicate if a fuel contains greater than 15% ethanol (E-15).'] | {'R1': 'Supported', 'R2': 'Supported', 'R3': 'Supported'} | No | false | 1 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
Can I use gasoline containing methanol?
Manual information:
Gasoline/Oxygenate Blends Some fuel suppliers blend unleaded gasoline with oxygenates such as ethanol. Problems that result from using gasoline containing more than 15% ethanol (E-15) or gasoline containing methanol are not the responsibility of the manufacturer and may void the New Vehicle Limited Warranty. CAUTION: DO NOT use E-85, gasoline containing methanol, or gasoline containing more than 15% ethanol (E-15). Use of these blends may result in starting and drivability problems, damage critical fuel system components, cause emissions to exceed the applicable standard, and/or cause the Malfunction Indicator Light to illuminate. Please observe pump labels as they should clearly communicate if a fuel contains greater than 15% ethanol (E-15).
Answer to user's question:
|
dev_25 | Ensemble Retriever | Can I use gasoline containing methanol? | Gasoline/Oxygenate Blends Some fuel suppliers blend unleaded gasoline with oxygenates such as ethanol. Problems that result from using gasoline containing more than 15% ethanol (E-15) or gasoline containing methanol are not the responsibility of the manufacturer and may void the New Vehicle Limited Warranty. CAUTION: DO NOT use E-85, gasoline containing methanol, or gasoline containing more than 15% ethanol (E-15). Use of these blends may result in starting and drivability problems, damage critical fuel system components, cause emissions to exceed the applicable standard, and/or cause the Malfunction Indicator Light to illuminate. Please observe pump labels as they should clearly communicate if a fuel contains greater than 15% ethanol (E-15). Fuel System Cautions CAUTION: Follow these guidelines to maintain your vehicle’s performance: The use of leaded gasoline is prohibited by Federal law. Using leaded gasoline can impair engine performance and damage the emissions control system. An out-of-tune engine, certain fuel or ignition malfunctions can cause the catalytic converter to overheat. If you notice a pungent burning odor or some light smoke, your engine may be out-of-tune or malfunctioning and may require immediate service. Contact an authorized dealer for service assistance. The use of fuel additives, which are now being sold as octane enhancers, is not recommended. Most of these products contain high concentrations of methanol. Fuel system damage or vehicle performance problems resulting from the use of such fuels or additives is not the responsibility of The manufacturer and may void or not be covered under the New Vehicle Limited Warranty. Note: Intentional tampering with the emissions control system can result in civil penalties being assessed against you. Methylcyclopentadienyl Manganese Tricarbonyl (MMT) In Gasoline MMT is a manganese-containing metallic additive that is blended into some gasolines to increase octane. Gasoline blended with MMT provides no performance advantage beyond gasoline of the same octane number without MMT. Gasoline blended with MMT reduces spark plug life and reduces emissions system performance in some vehicles. The manufacturer recommends that gasoline without MMT be used in your vehicle. The MMT content of gasoline may not be indicated on the gasoline pump; therefore, you should ask your gasoline retailer whether the gasoline contains MMT. MMT is prohibited in Federal law and California reformulated gasoline. | No, you should not use gasoline containing methanol as it may result in starting and drivability problems, damage critical fuel system components, cause emissions to exceed the applicable standard, and/or cause the Malfunction Indicator Light to illuminate. Additionally, using gasoline containing methanol may void the New Vehicle Limited Warranty. | ['R1: No, you should not use gasoline containing methanol as it may result in starting and drivability problems, damage critical fuel system components, cause emissions to exceed the applicable standard, and/or cause the Malfunction Indicator Light to illuminate.', 'R2: Additionally, using gasoline containing methanol may void the New Vehicle Limited Warranty.'] | {'R1': 'Supported', 'R2': 'Supported'} | No | false | 1 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
Can I use gasoline containing methanol?
Manual information:
Gasoline/Oxygenate Blends Some fuel suppliers blend unleaded gasoline with oxygenates such as ethanol. Problems that result from using gasoline containing more than 15% ethanol (E-15) or gasoline containing methanol are not the responsibility of the manufacturer and may void the New Vehicle Limited Warranty. CAUTION: DO NOT use E-85, gasoline containing methanol, or gasoline containing more than 15% ethanol (E-15). Use of these blends may result in starting and drivability problems, damage critical fuel system components, cause emissions to exceed the applicable standard, and/or cause the Malfunction Indicator Light to illuminate. Please observe pump labels as they should clearly communicate if a fuel contains greater than 15% ethanol (E-15). Fuel System Cautions CAUTION: Follow these guidelines to maintain your vehicle’s performance: The use of leaded gasoline is prohibited by Federal law. Using leaded gasoline can impair engine performance and damage the emissions control system. An out-of-tune engine, certain fuel or ignition malfunctions can cause the catalytic converter to overheat. If you notice a pungent burning odor or some light smoke, your engine may be out-of-tune or malfunctioning and may require immediate service. Contact an authorized dealer for service assistance. The use of fuel additives, which are now being sold as octane enhancers, is not recommended. Most of these products contain high concentrations of methanol. Fuel system damage or vehicle performance problems resulting from the use of such fuels or additives is not the responsibility of The manufacturer and may void or not be covered under the New Vehicle Limited Warranty. Note: Intentional tampering with the emissions control system can result in civil penalties being assessed against you. Methylcyclopentadienyl Manganese Tricarbonyl (MMT) In Gasoline MMT is a manganese-containing metallic additive that is blended into some gasolines to increase octane. Gasoline blended with MMT provides no performance advantage beyond gasoline of the same octane number without MMT. Gasoline blended with MMT reduces spark plug life and reduces emissions system performance in some vehicles. The manufacturer recommends that gasoline without MMT be used in your vehicle. The MMT content of gasoline may not be indicated on the gasoline pump; therefore, you should ask your gasoline retailer whether the gasoline contains MMT. MMT is prohibited in Federal law and California reformulated gasoline.
Answer to user's question:
|
dev_26 | Ensemble Retriever | What is the appropriate rim size for the tire size listed? | Rim Size This is the rim size that is appropriate for the tire size listed. Tire Size The tire size on the Vehicle Certification Label represents the actual tire size on your vehicle. Replacement tires must be equal to the load capacity of this tire size. Example: example size designation: p215/65r15xl 95h, 215/65r15 96h, lt235/85r16c, t145/80d18 103m, 31x10.5 r15 lt p = passenger car tire size based on us design standards, or "....blank...." = passenger car tire based on european design standards, or lt = light truck tire based on us design standards, or t or s = temporary spare tire, or 31 = overall diameter in inches (in) 215, 235, 145 = section width in millimeters (mm) 65, 85, 80 = aspect ratio in percent (%) ratio of section height to section width of tire, or 10.5 = section width in inches (in) r = construction code "r" means radial construction, or "d" means diagonal or bias construction 15, 16, 18 = rim diameter in inches (in) service description: 95 = load index a numerical code associated with the maximum load a tire can carry h = speed symbol a symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions the maximum speed corresponding to the speed symbol should only be achieved under specified operating conditions (i.e., tire pressure, vehicle loading, road conditions, and posted speed limits) load identification: absence of the following load identification symbols on the sidewall of the tire indicates a standard load (sl) tire: xl = extra load (or reinforced) tire, or ll = light load tire or c, d, e, f, g = load range associated with the maximum load a tire can carry at a specified pressure maximum load – maximum load indicates the maximum load this tire is designed to carry maximum pressure – maximum pressure indicates the maximum permissible cold tire inflation pressure for this tire. | The appropriate rim size for the tire size listed depends on the specific tire size mentioned. The rim diameter is indicated at the end of the tire size designation, such as 15, 16, or 18 inches. Therefore, you would need to refer to the specific tire size listed to determine the appropriate rim size. | ['R1: The appropriate rim size for the tire size listed depends on the specific tire size mentioned.', 'R2: The rim diameter is indicated at the end of the tire size designation, such as 15, 16, or 18 inches.', 'R3: Therefore, you would need to refer to the specific tire size listed to determine the appropriate rim size.'] | {'R1': 'Supported', 'R2': 'Supported', 'R3': 'Supported'} | No | false | 1 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
What is the appropriate rim size for the tire size listed?
Manual information:
Rim Size This is the rim size that is appropriate for the tire size listed. Tire Size The tire size on the Vehicle Certification Label represents the actual tire size on your vehicle. Replacement tires must be equal to the load capacity of this tire size. Example: example size designation: p215/65r15xl 95h, 215/65r15 96h, lt235/85r16c, t145/80d18 103m, 31x10.5 r15 lt p = passenger car tire size based on us design standards, or "....blank...." = passenger car tire based on european design standards, or lt = light truck tire based on us design standards, or t or s = temporary spare tire, or 31 = overall diameter in inches (in) 215, 235, 145 = section width in millimeters (mm) 65, 85, 80 = aspect ratio in percent (%) ratio of section height to section width of tire, or 10.5 = section width in inches (in) r = construction code "r" means radial construction, or "d" means diagonal or bias construction 15, 16, 18 = rim diameter in inches (in) service description: 95 = load index a numerical code associated with the maximum load a tire can carry h = speed symbol a symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions the maximum speed corresponding to the speed symbol should only be achieved under specified operating conditions (i.e., tire pressure, vehicle loading, road conditions, and posted speed limits) load identification: absence of the following load identification symbols on the sidewall of the tire indicates a standard load (sl) tire: xl = extra load (or reinforced) tire, or ll = light load tire or c, d, e, f, g = load range associated with the maximum load a tire can carry at a specified pressure maximum load – maximum load indicates the maximum load this tire is designed to carry maximum pressure – maximum pressure indicates the maximum permissible cold tire inflation pressure for this tire.
Answer to user's question:
|
dev_27 | Adaptive Ensemble Search | What is the appropriate rim size for the tire size listed? | This is the rim size that is appropriate for the tire size listed. P (Passenger) — Metric tire sizing is based on US design standards. P-Metric tires have the letter “P” molded into the sidewall preceding the size designation. Example: P215/65R15 95H. European — Metric tire sizing is based on European design standards. Tires designed to this standard have the tire size molded into the sidewall beginning with the section width. The letter “P” is absent from this tire size designation. Example: 215/65R15 96H. LT (Light Truck) — Metric tire sizing is based on US design standards. The size designation for LT-Metric tires is the same as for P-Metric tires except for the letters “LT” that are molded into the sidewall preceding the size designation. Example: LT235/85R16. Temporary spare tires are designed for temporary emergency use only. Temporary high pressure compact spare tires have the letter “T” or “S” molded into the sidewall preceding the size designation. Example: T145/80D18 103M. High flotation tire sizing is based on US design standards and it begins with the tire diameter molded into the sidewall. Example: 31x10.5 R15 LT. The tire size on the Vehicle Certification Label represents the actual tire size on your vehicle. Replacement tires must be equal to the load capacity of this tire size. | The appropriate rim size for the tire size listed depends on the specific tire size designation. Here are the rim sizes that are appropriate for each tire size: - For P-Metric tires (e.g. P215/65R15 95H), the appropriate rim size is 15 inches. - For European-Metric tires (e.g. 215/65R15 96H), the appropriate rim size is 15 inches. - For LT-Metric tires (e.g. LT235/85R16), the appropriate rim size is 16 inches. - For temporary high pressure compact spare tires (e.g. T145/80D18 103M), the appropriate rim size is 18 inches. - For high flotation tires (e.g. 31x10.5 R15 LT), the appropriate rim size is 15 inches. It's important to note that the tire size on the Vehicle Certification Label represents the actual tire size on your vehicle, and replacement tires must be equal to the load capacity of this tire size. | ['R1: The appropriate rim size for the tire size listed depends on the specific tire size designation.', 'R2: Here are the rim sizes that are appropriate for each tire size: - For P-Metric tires (e.g.', 'R3: P215/65R15 95H), the appropriate rim size is 15 inches.', 'R4: - For European-Metric tires (e.g.', 'R5: 215/65R15 96H), the appropriate rim size is 15 inches.', 'R6: - For LT-Metric tires (e.g.', 'R7: LT235/85R16), the appropriate rim size is 16 inches.', 'R8: - For temporary high pressure compact spare tires (e.g.', 'R9: T145/80D18 103M), the appropriate rim size is 18 inches.', 'R10: - For high flotation tires (e.g.', 'R11: 31x10.5 R15 LT), the appropriate rim size is 15 inches.', "R12: It's important to note that the tire size on the Vehicle Certification Label represents the actual tire size on your vehicle, and replacement tires must be equal to the load capacity of this tire size."] | {'R1': 'Supported', 'R2': 'Supported', 'R3': 'Supported', 'R4': 'Supported', 'R5': 'Supported', 'R6': 'Supported', 'R7': 'Supported', 'R8': 'Supported', 'R9': 'Supported', 'R10': 'Supported', 'R11': 'Supported', 'R12': 'Supported'} | No | false | 1 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
What is the appropriate rim size for the tire size listed?
Manual information:
This is the rim size that is appropriate for the tire size listed. P (Passenger) — Metric tire sizing is based on US design standards. P-Metric tires have the letter “P” molded into the sidewall preceding the size designation. Example: P215/65R15 95H. European — Metric tire sizing is based on European design standards. Tires designed to this standard have the tire size molded into the sidewall beginning with the section width. The letter “P” is absent from this tire size designation. Example: 215/65R15 96H. LT (Light Truck) — Metric tire sizing is based on US design standards. The size designation for LT-Metric tires is the same as for P-Metric tires except for the letters “LT” that are molded into the sidewall preceding the size designation. Example: LT235/85R16. Temporary spare tires are designed for temporary emergency use only. Temporary high pressure compact spare tires have the letter “T” or “S” molded into the sidewall preceding the size designation. Example: T145/80D18 103M. High flotation tire sizing is based on US design standards and it begins with the tire diameter molded into the sidewall. Example: 31x10.5 R15 LT. The tire size on the Vehicle Certification Label represents the actual tire size on your vehicle. Replacement tires must be equal to the load capacity of this tire size.
Answer to user's question:
|
dev_28 | Ensemble Retriever (Base) | How to read the speedometer? | Speedometer push and release the up or down arrow button until the speedometer menu icon is displayed in the instrument cluster display. Push and release the ok button to toggle between mph and km/h. | To read the speedometer, you need to push and release the up or down arrow button until the speedometer menu icon is displayed in the instrument cluster display. Then, push and release the OK button to toggle between mph and km/h. The speedometer will display your current speed in either miles per hour or kilometers per hour, depending on your preference. | ['R1: To read the speedometer, you need to push and release the up or down arrow button until the speedometer menu icon is displayed in the instrument cluster display.', 'R2: Then, push and release the OK button to toggle between mph and km/h.', 'R3: The speedometer will display your current speed in either miles per hour or kilometers per hour, depending on your preference.'] | {'R1': 'Supported', 'R2': 'Supported', 'R3': 'Supported'} | No | false | 1 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
How to read the speedometer?
Manual information:
Speedometer push and release the up or down arrow button until the speedometer menu icon is displayed in the instrument cluster display. Push and release the ok button to toggle between mph and km/h.
Answer to user's question:
|
dev_29 | Adaptive Ensemble Search | How to read the speedometer? | Speedometer push and release the up or down arrow button until the speedometer menu icon is displayed in the instrument cluster display. Push and release the ok button to toggle between mph and km/h. | To read the speedometer, follow these steps: 1. Push and release the up or down arrow button until the speedometer menu icon is displayed in the instrument cluster display. 2. Once the speedometer menu icon is displayed, push and release the OK button to toggle between mph and km/h. 3. The speedometer will display the vehicle's speed in either miles per hour (mph) or kilometers per hour (km/h), depending on the unit of measurement selected in step 2. | ['R1: To read the speedometer, follow these steps: 1.', 'R2: Push and release the up or down arrow button until the speedometer menu icon is displayed in the instrument cluster display.', 'R3: 2. Once the speedometer menu icon is displayed, push and release the OK button to toggle between mph and km/h.', "R4: 3. The speedometer will display the vehicle's speed in either miles per hour (mph) or kilometers per hour (km/h), depending on the unit of measurement selected in step 2."] | {'R1': 'Neither', 'R2': 'Supported', 'R3': 'Supported', 'R4': 'Supported'} | No | false | 1 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
How to read the speedometer?
Manual information:
Speedometer push and release the up or down arrow button until the speedometer menu icon is displayed in the instrument cluster display. Push and release the ok button to toggle between mph and km/h.
Answer to user's question:
|
dev_30 | Ensemble Retriever | How to read the speedometer? | Instrument cluster descriptions tachometer indicates the engine speed in revolutions per minute (rpm x 1000). Caution: do not operate the engine with the tachometer pointer in the red area. Engine damage will occur. Temperature gauge the temperature gauge shows engine coolant temperature. Any reading within the normal range indicates that the engine cooling system is operating satisfactorily. The gauge pointer will likely indicate a higher temperature when driving in hot weather, up mountain grades, or when towing a trailer. It should not be allowed to exceed the upper limits of the normal operating range. Warning: a hot engine cooling system is dangerous. You or others could be badly burned by steam or boiling coolant. It is recommended that you call an authorized dealer for service if your vehicle overheats. Caution: driving with a hot engine cooling system could damage your vehicle. If the temperature gauge reads “H” pull over and stop the vehicle. Idle the vehicle with the air conditioner turned off until the pointer drops back into the normal range. If the pointer remains on the “H”, turn the engine off immediately and call an authorized dealer for service. Instrument cluster display the instrument cluster display features a driver interactive display. Fuel gauge the pointer shows the level of fuel in the fuel tank when the ignition switch is in the on/run position. The fuel pump symbol points to the side of the vehicle where the fuel filler door is located Speedometer indicates vehicle speed. Speedometer push and release the up or down arrow button until the speedometer menu icon is displayed in the instrument cluster display. Push and release the ok button to toggle between mph and km/h. Favorite menus speedometer vehicle info off road — if equipped (show/hide) driver assist — if equipped (show/hide) fuel economy (show/hide) trip info (show/hide) stop / start — if equipped audio (show/hide) messages screen setup vehicle settings — if equipped. | The speedometer indicates the vehicle speed. To toggle between mph and km/h, push and release the up or down arrow button until the speedometer menu icon is displayed in the instrument cluster display. Then, push and release the OK button to switch between the two units of measurement. | ['R1: The speedometer indicates the vehicle speed.', 'R2: To toggle between mph and km/h, push and release the up or down arrow button until the speedometer menu icon is displayed in the instrument cluster display.', 'R3: Then, push and release the OK button to switch between the two units of measurement.'] | {'R1': 'Supported', 'R2': 'Supported', 'R3': 'Supported'} | No | false | 1 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
How to read the speedometer?
Manual information:
Instrument cluster descriptions tachometer indicates the engine speed in revolutions per minute (rpm x 1000). Caution: do not operate the engine with the tachometer pointer in the red area. Engine damage will occur. Temperature gauge the temperature gauge shows engine coolant temperature. Any reading within the normal range indicates that the engine cooling system is operating satisfactorily. The gauge pointer will likely indicate a higher temperature when driving in hot weather, up mountain grades, or when towing a trailer. It should not be allowed to exceed the upper limits of the normal operating range. Warning: a hot engine cooling system is dangerous. You or others could be badly burned by steam or boiling coolant. It is recommended that you call an authorized dealer for service if your vehicle overheats. Caution: driving with a hot engine cooling system could damage your vehicle. If the temperature gauge reads “H” pull over and stop the vehicle. Idle the vehicle with the air conditioner turned off until the pointer drops back into the normal range. If the pointer remains on the “H”, turn the engine off immediately and call an authorized dealer for service. Instrument cluster display the instrument cluster display features a driver interactive display. Fuel gauge the pointer shows the level of fuel in the fuel tank when the ignition switch is in the on/run position. The fuel pump symbol points to the side of the vehicle where the fuel filler door is located Speedometer indicates vehicle speed. Speedometer push and release the up or down arrow button until the speedometer menu icon is displayed in the instrument cluster display. Push and release the ok button to toggle between mph and km/h. Favorite menus speedometer vehicle info off road — if equipped (show/hide) driver assist — if equipped (show/hide) fuel economy (show/hide) trip info (show/hide) stop / start — if equipped audio (show/hide) messages screen setup vehicle settings — if equipped.
Answer to user's question:
|
dev_32 | Lucene Search | How to erase old channels from HomeLink? | Erasing All The HomeLink® Channels To erase the channels, follow this procedure: Place the ignition switch into the ON/RUN position. Push and hold the two outside HomeLink® buttons (I and III) for up to 20 seconds, or until the HomeLink® indicator light flashes. Note: Erasing all channels should only be performed when programming HomeLink® for the first time. Do not erase channels when programming additional buttons. | To erase old channels from HomeLink, you need to follow these steps: 1. Place the ignition switch into the ON/RUN position. 2. Push and hold the two outside HomeLink® buttons (I and III) for up to 20 seconds, or until the HomeLink® indicator light flashes. Note: Erasing all channels should only be performed when programming HomeLink® for the first time. Do not erase channels when programming additional buttons. | ['R1: To erase old channels from HomeLink, you need to follow these steps: 1.', 'R2: Place the ignition switch into the ON/RUN position.', 'R3: 2. Push and hold the two outside HomeLink® buttons (I and III) for up to 20 seconds, or until the HomeLink® indicator light flashes.', 'R4: Note: Erasing all channels should only be performed when programming HomeLink® for the first time.', 'R5: Do not erase channels when programming additional buttons.'] | {'R1': 'Supported', 'R2': 'Supported', 'R3': 'Supported', 'R4': 'Supported', 'R5': 'Supported'} | No | false | 1 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
How to erase old channels from HomeLink?
Manual information:
Erasing All The HomeLink® Channels To erase the channels, follow this procedure: Place the ignition switch into the ON/RUN position. Push and hold the two outside HomeLink® buttons (I and III) for up to 20 seconds, or until the HomeLink® indicator light flashes. Note: Erasing all channels should only be performed when programming HomeLink® for the first time. Do not erase channels when programming additional buttons.
Answer to user's question:
|
dev_33 | Ensemble Retriever (Base) | How to erase old channels from HomeLink? | Erasing All The HomeLink® Channels To erase the channels, follow this procedure: Place the ignition switch into the ON/RUN position. Push and hold the two outside HomeLink® buttons (I and III) for up to 20 seconds, or until the HomeLink® indicator light flashes. Note: Erasing all channels should only be performed when programming HomeLink® for the first time. Do not erase channels when programming additional buttons. | To erase old channels from HomeLink, you need to place the ignition switch into the ON/RUN position and then push and hold the two outside HomeLink® buttons (I and III) for up to 20 seconds, or until the HomeLink® indicator light flashes. | ['R1: To erase old channels from HomeLink, you need to place the ignition switch into the ON/RUN position and then push and hold the two outside HomeLink® buttons (I and III) for up to 20 seconds, or until the HomeLink® indicator light flashes.'] | {'R1': 'Supported'} | No | false | 1 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
How to erase old channels from HomeLink?
Manual information:
Erasing All The HomeLink® Channels To erase the channels, follow this procedure: Place the ignition switch into the ON/RUN position. Push and hold the two outside HomeLink® buttons (I and III) for up to 20 seconds, or until the HomeLink® indicator light flashes. Note: Erasing all channels should only be performed when programming HomeLink® for the first time. Do not erase channels when programming additional buttons.
Answer to user's question:
|
dev_35 | Ensemble Retriever (Base) | What is the ASSIST call used for? | ASSIST Call The ASSIST button is used to automatically connect you to any one of the following support centers: Roadside Assistance – If you get a flat tire, or need a tow, just push the ASSIST button and you’ll be connected to someone who can help. Roadside Assistance will know what vehicle you’re driving and its location. Additional fees may apply for roadside assistance. SiriusXM Guardian™ Customer Care – In-vehicle support for SiriusXM Guardian™. Vehicle Customer Care – Total support for all other vehicle issues. Uconnect Customer Care - Total support for Radio, Phone and NAV issues. | The ASSIST call button is used to automatically connect you to support centers such as Roadside Assistance, SiriusXM Guardian™ Customer Care, Vehicle Customer Care, and Uconnect Customer Care for various vehicle-related issues. | ['R1: The ASSIST call button is used to automatically connect you to support centers such as Roadside Assistance, SiriusXM Guardian™ Customer Care, Vehicle Customer Care, and Uconnect Customer Care for various vehicle-related issues.'] | {'R1': 'Supported'} | No | false | 1 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
What is the ASSIST call used for?
Manual information:
ASSIST Call The ASSIST button is used to automatically connect you to any one of the following support centers: Roadside Assistance – If you get a flat tire, or need a tow, just push the ASSIST button and you’ll be connected to someone who can help. Roadside Assistance will know what vehicle you’re driving and its location. Additional fees may apply for roadside assistance. SiriusXM Guardian™ Customer Care – In-vehicle support for SiriusXM Guardian™. Vehicle Customer Care – Total support for all other vehicle issues. Uconnect Customer Care - Total support for Radio, Phone and NAV issues.
Answer to user's question:
|
dev_36 | Ensemble Retriever | What is the ASSIST call used for? | ASSIST Call The ASSIST button is used to automatically connect you to any one of the following support centers: Roadside Assistance – If you get a flat tire, or need a tow, just push the ASSIST button and you’ll be connected to someone who can help. Roadside Assistance will know what vehicle you’re driving and its location. Additional fees may apply for roadside assistance. SiriusXM Guardian™ Customer Care – In-vehicle support for SiriusXM Guardian™. Vehicle Customer Care – Total support for all other vehicle issues. Uconnect Customer Care - Total support for Radio, Phone and NAV issues. The ASSIST and SOS Call Buttons On Your Rearview Mirror Or Overhead Console If equipped, the ASSIST Button is used for contacting Roadside Assistance, Vehicle Care, Uconnect Care, and SiriusXM Guardian™ Customer Care. The SOS Call button connects you directly to SiriusXM Guardian™ Customer Care for assistance in an emergency. SOS Call — If Equipped WARNING: Some SiriusXM Guardian™ connected services, including SOS Call and Roadside Assistance Call, will NOT work without a network connection compatible with your device. | The ASSIST call button is used to automatically connect you to support centers such as Roadside Assistance, SiriusXM Guardian™ Customer Care, Vehicle Customer Care, and Uconnect Customer Care. It can be used for issues related to radio, phone, navigation, and other vehicle issues. Additionally, it can be used to contact Roadside Assistance in case of a flat tire or if you need a tow. | ['R1: The ASSIST call button is used to automatically connect you to support centers such as Roadside Assistance, SiriusXM Guardian™ Customer Care, Vehicle Customer Care, and Uconnect Customer Care.', 'R2: It can be used for issues related to radio, phone, navigation, and other vehicle issues.', 'R3: Additionally, it can be used to contact Roadside Assistance in case of a flat tire or if you need a tow.'] | {'R1': 'Supported', 'R2': 'Supported', 'R3': 'Supported'} | No | false | 1 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
What is the ASSIST call used for?
Manual information:
ASSIST Call The ASSIST button is used to automatically connect you to any one of the following support centers: Roadside Assistance – If you get a flat tire, or need a tow, just push the ASSIST button and you’ll be connected to someone who can help. Roadside Assistance will know what vehicle you’re driving and its location. Additional fees may apply for roadside assistance. SiriusXM Guardian™ Customer Care – In-vehicle support for SiriusXM Guardian™. Vehicle Customer Care – Total support for all other vehicle issues. Uconnect Customer Care - Total support for Radio, Phone and NAV issues. The ASSIST and SOS Call Buttons On Your Rearview Mirror Or Overhead Console If equipped, the ASSIST Button is used for contacting Roadside Assistance, Vehicle Care, Uconnect Care, and SiriusXM Guardian™ Customer Care. The SOS Call button connects you directly to SiriusXM Guardian™ Customer Care for assistance in an emergency. SOS Call — If Equipped WARNING: Some SiriusXM Guardian™ connected services, including SOS Call and Roadside Assistance Call, will NOT work without a network connection compatible with your device.
Answer to user's question:
|
dev_37 | Adaptive Ensemble Search | If it possible to get hands burned when using the steering wheel heater? | Persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury, medication, alcohol use, exhaustion, or other physical conditions must exercise care when using the steering wheel heater. It may cause burns even at low temperatures, especially if used for long periods. Do not place anything on the steering wheel that insulates against heat, such as a blanket or steering wheel covers of any type and material. This may cause the steering wheel heater to overheat. The steering wheel contains a heating element that helps warm your hands in cold weather. The heated steering wheel has only one temperature setting. Once the heated steering wheel has been turned on, it will stay on until the operator turns it off. The heated steering wheel may not turn on when it is already warm. Persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury, medication, alcohol use, exhaustion or other physical condition must exercise care when using the seat heater. It may cause burns even at low temperatures, especially if used for long periods of time. Do not place anything on the seat or seatback that insulates against heat, such as a blanket or cushion. This may cause the seat heater to overheat. Sitting in a seat that has been overheated could cause serious burns due to the increased surface temperature of the seat. The heated steering wheel button is located on the center of the instrument panel below the radio screen, and within the Climate or Controls screen of the touchscreen. Press the heated steering wheel button once to turn the heating element on. Press the heated steering wheel button a second time to turn the heating element off. The engine must be running for the heated steering wheel to operate. Setting Name Description Auto-On Driver Heated/Ventilated Seat & Heated Steering Wheel With Vehicle Start This setting will activate the vehicle’s comfort system and heated seats or heated steering wheel when the vehicle is remote started or ignition is started. The “Off” setting will not activate the comfort systems. The “Remote Start” setting will only activate the comfort systems when using Remote Start. The “All Start” setting will activate the comfort systems whenever the vehicle is started. When Remote Start is activated, the front and rear defrost will automatically turn on in cold weather. The heated steering wheel and driver heated seat feature will also turn on if programmed in the Comfort menu screen within Uconnect Settings The heated seat control buttons are located on the center instrument panel below the touchscreen and also in the Climate Control touchscreen menu. If the “POWER STEERING HOT” message and an icon are displayed on the instrument cluster screen, it indicates that extreme steering maneuvers may have occurred, which caused an over temperature condition in the power steering system. You will lose power steering assistance momentarily until the over temperature condition no longer exists. Once driving conditions are safe, pull over and let vehicle idle for a few moments until the light turns off | Yes, it is possible to get burned when using the steering wheel heater, especially if it is used for long periods of time. This is particularly true for persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury, medication, alcohol use, exhaustion, or other physical conditions. It is important to exercise care when using the steering wheel heater and not to place anything on the steering wheel that insulates against heat, such as a blanket or steering wheel covers of any type and material, as this may cause the steering wheel heater to overheat. | ['R1: Yes, it is possible to get burned when using the steering wheel heater, especially if it is used for long periods of time.', 'R2: This is particularly true for persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury, medication, alcohol use, exhaustion, or other physical conditions.', 'R3: It is important to exercise care when using the steering wheel heater and not to place anything on the steering wheel that insulates against heat, such as a blanket or steering wheel covers of any type and material, as this may cause the steering wheel heater to overheat.'] | {'R1': 'Supported', 'R2': 'Supported', 'R3': 'Supported'} | No | false | 1 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
If it possible to get hands burned when using the steering wheel heater?
Manual information:
Persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury, medication, alcohol use, exhaustion, or other physical conditions must exercise care when using the steering wheel heater. It may cause burns even at low temperatures, especially if used for long periods. Do not place anything on the steering wheel that insulates against heat, such as a blanket or steering wheel covers of any type and material. This may cause the steering wheel heater to overheat. The steering wheel contains a heating element that helps warm your hands in cold weather. The heated steering wheel has only one temperature setting. Once the heated steering wheel has been turned on, it will stay on until the operator turns it off. The heated steering wheel may not turn on when it is already warm. Persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury, medication, alcohol use, exhaustion or other physical condition must exercise care when using the seat heater. It may cause burns even at low temperatures, especially if used for long periods of time. Do not place anything on the seat or seatback that insulates against heat, such as a blanket or cushion. This may cause the seat heater to overheat. Sitting in a seat that has been overheated could cause serious burns due to the increased surface temperature of the seat. The heated steering wheel button is located on the center of the instrument panel below the radio screen, and within the Climate or Controls screen of the touchscreen. Press the heated steering wheel button once to turn the heating element on. Press the heated steering wheel button a second time to turn the heating element off. The engine must be running for the heated steering wheel to operate. Setting Name Description Auto-On Driver Heated/Ventilated Seat & Heated Steering Wheel With Vehicle Start This setting will activate the vehicle’s comfort system and heated seats or heated steering wheel when the vehicle is remote started or ignition is started. The “Off” setting will not activate the comfort systems. The “Remote Start” setting will only activate the comfort systems when using Remote Start. The “All Start” setting will activate the comfort systems whenever the vehicle is started. When Remote Start is activated, the front and rear defrost will automatically turn on in cold weather. The heated steering wheel and driver heated seat feature will also turn on if programmed in the Comfort menu screen within Uconnect Settings The heated seat control buttons are located on the center instrument panel below the touchscreen and also in the Climate Control touchscreen menu. If the “POWER STEERING HOT” message and an icon are displayed on the instrument cluster screen, it indicates that extreme steering maneuvers may have occurred, which caused an over temperature condition in the power steering system. You will lose power steering assistance momentarily until the over temperature condition no longer exists. Once driving conditions are safe, pull over and let vehicle idle for a few moments until the light turns off
Answer to user's question:
|
dev_38 | Ensemble Retriever (Base) | If it possible to get hands burned when using the steering wheel heater? | Heated Steering Wheel — If Equipped The steering wheel contains a heating element that helps warm your hands in cold weather. The heated steering wheel has only one temperature setting. Once the heated steering wheel has been turned on, it will stay on until the operator turns it off. The heated steering wheel may not turn on when it is already warm. The heated steering wheel button is located on the center of the instrument panel below the radio screen, and within the Climate or Controls screen of the touchscreen. Press the heated steering wheel button once to turn the heating element on. Press the heated steering wheel button a second time to turn the heating element off. For information on use with the Remote Start system, see Note: The engine must be running for the heated steering wheel to operate. WARNING: Persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury, medication, alcohol use, exhaustion, or other physical conditions must exercise care when using the steering wheel heater. It may cause burns even at low temperatures, especially if used for long periods. Do not place anything on the steering wheel that insulates against heat, such as a blanket or steering wheel covers of any type and material. This may cause the steering wheel heater to overheat. | Yes, it is possible to get burned when using the steering wheel heater, especially if it is used for long periods. The warning in the context states that persons who are unable to feel pain to the skin must exercise care when using the steering wheel heater as it may cause burns even at low temperatures. It is also advised not to place anything on the steering wheel that insulates against heat, as this may cause the steering wheel heater to overheat. | ['R1: Yes, it is possible to get burned when using the steering wheel heater, especially if it is used for long periods.', 'R2: The warning in the context states that persons who are unable to feel pain to the skin must exercise care when using the steering wheel heater as it may cause burns even at low temperatures.', 'R3: It is also advised not to place anything on the steering wheel that insulates against heat, as this may cause the steering wheel heater to overheat.'] | {'R1': 'Supported', 'R2': 'Supported', 'R3': 'Supported'} | No | false | 1 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
If it possible to get hands burned when using the steering wheel heater?
Manual information:
Heated Steering Wheel — If Equipped The steering wheel contains a heating element that helps warm your hands in cold weather. The heated steering wheel has only one temperature setting. Once the heated steering wheel has been turned on, it will stay on until the operator turns it off. The heated steering wheel may not turn on when it is already warm. The heated steering wheel button is located on the center of the instrument panel below the radio screen, and within the Climate or Controls screen of the touchscreen. Press the heated steering wheel button once to turn the heating element on. Press the heated steering wheel button a second time to turn the heating element off. For information on use with the Remote Start system, see Note: The engine must be running for the heated steering wheel to operate. WARNING: Persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury, medication, alcohol use, exhaustion, or other physical conditions must exercise care when using the steering wheel heater. It may cause burns even at low temperatures, especially if used for long periods. Do not place anything on the steering wheel that insulates against heat, such as a blanket or steering wheel covers of any type and material. This may cause the steering wheel heater to overheat.
Answer to user's question:
|
dev_39 | Adaptive Ensemble Search | What should I pay attention to when putting cargo on top of the roof? | The Roof Luggage Rack is designed to allow for carrying an additional cargo load on vehicles equipped with a Hard Top. The load carried on the roof, when equipped with a luggage rack, must not exceed 100 lb (45 kg), this includes the weight of the crossbars, and it should be uniformly distributed over the cargo area. Crossbars should always be used whenever cargo is placed on the roof rack. Check the straps frequently to be sure that the load remains securely attached. Cargo must be securely tied down before driving your vehicle. Improperly secured loads can fly off the vehicle, particularly at high speeds, resulting in personal injury or property damage. Follow the roof rack cautions when carrying cargo on your roof rack. | When putting cargo on top of the roof, you should pay attention to the following: 1. The load carried on the roof, when equipped with a luggage rack, must not exceed 100 lb (45 kg), this includes the weight of the crossbars, and it should be uniformly distributed over the cargo area. 2. Crossbars should always be used whenever cargo is placed on the roof rack. 3. Check the straps frequently to be sure that the load remains securely attached. 4. Cargo must be securely tied down before driving your vehicle. 5. Improperly secured loads can fly off the vehicle, particularly at high speeds, resulting in personal injury or property damage. 6. Follow the roof rack cautions when carrying cargo on your roof rack. | ['R1: When putting cargo on top of the roof, you should pay attention to the following: 1.', 'R2: The load carried on the roof, when equipped with a luggage rack, must not exceed 100 lb (45 kg), this includes the weight of the crossbars, and it should be uniformly distributed over the cargo area.', 'R3: 2. Crossbars should always be used whenever cargo is placed on the roof rack.', 'R4: 3. Check the straps frequently to be sure that the load remains securely attached.', 'R5: 4. Cargo must be securely tied down before driving your vehicle.', 'R6: 5. Improperly secured loads can fly off the vehicle, particularly at high speeds, resulting in personal injury or property damage.', 'R7: 6. Follow the roof rack cautions when carrying cargo on your roof rack.'] | {'R1': 'Supported', 'R2': 'Supported', 'R3': 'Supported', 'R4': 'Supported', 'R5': 'Supported', 'R6': 'Supported', 'R7': 'Supported'} | No | false | 1 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
What should I pay attention to when putting cargo on top of the roof?
Manual information:
The Roof Luggage Rack is designed to allow for carrying an additional cargo load on vehicles equipped with a Hard Top. The load carried on the roof, when equipped with a luggage rack, must not exceed 100 lb (45 kg), this includes the weight of the crossbars, and it should be uniformly distributed over the cargo area. Crossbars should always be used whenever cargo is placed on the roof rack. Check the straps frequently to be sure that the load remains securely attached. Cargo must be securely tied down before driving your vehicle. Improperly secured loads can fly off the vehicle, particularly at high speeds, resulting in personal injury or property damage. Follow the roof rack cautions when carrying cargo on your roof rack.
Answer to user's question:
|
dev_40 | Ensemble Retriever (Base) | What should I pay attention to when putting cargo on top of the roof? | ROOF LUGGAGE RACK — IF EQUIPPED The Roof Luggage Rack is designed to allow for carrying an additional cargo load on vehicles equipped with a Hard Top. The load carried on the roof, when equipped with a luggage rack, must not exceed 100 lb (45 kg), this includes the weight of the crossbars, and it should be uniformly distributed over the cargo area. Crossbars should always be used whenever cargo is placed on the roof rack. Check the straps frequently to be sure that the load remains securely attached. External racks do not increase the total load carrying capacity of the vehicle. Be sure that the total occupant and luggage load inside the vehicle, plus the load on the luggage rack, does not exceed the maximum vehicle load capacity. Note: roof rack applications are for hard top models only. Note: Crossbars can be purchased at an authorized dealer through Mopar® parts. WARNING: Cargo must be securely tied down before driving your vehicle. Improperly secured loads can fly off the vehicle, particularly at high speeds, resulting in personal injury or property damage. Follow the roof rack cautions when carrying cargo on your roof rack. CAUTION: To avoid damage to the roof rack and vehicle, do not exceed the maximum roof rack load capacity. Always distribute heavy loads as evenly as possible and secure the load appropriately. Long loads, which extend over the windshield, should be secured to both the front and rear of the vehicle. Place a blanket or other protection between the surface of the roof and the load. Travel at reduced speeds and turn corners carefully when carrying large or heavy loads on the roof rack. Wind forces, due to natural causes or nearby truck traffic, can add sudden upward lift. It is recommended to not carry large flat loads, such as wood panels or surfboards, which may result in damage to the cargo or your vehicle. Load should always be secured to crossbars first, with tie down loops used as additional securing points if needed. Tie loops are intended as supplementary tie down points only. Do not use ratcheting mechanisms with the tie loops. Check the straps frequently to be sure that the load remains securely attached. | When putting cargo on top of the roof, you should pay attention to the following: 1. The load carried on the roof, when equipped with a luggage rack, must not exceed 100 lb (45 kg), this includes the weight of the crossbars, and it should be uniformly distributed over the cargo area. 2. Crossbars should always be used whenever cargo is placed on the roof rack. 3. Check the straps frequently to be sure that the load remains securely attached. 4. Cargo must be securely tied down before driving your vehicle. 5. To avoid damage to the roof rack and vehicle, do not exceed the maximum roof rack load capacity. 6. Always distribute heavy loads as evenly as possible and secure the load appropriately. 7. Long loads, which extend over the windshield, should be secured to both the front and rear of the vehicle. 8. Place a blanket or other protection between the surface of the roof and the load. 9. Travel at reduced speeds and turn corners carefully when carrying large or heavy loads on the roof rack. 10. Load should always be secured to crossbars first, with tie down loops used as additional securing points if needed. | ['R1: When putting cargo on top of the roof, you should pay attention to the following: 1.', 'R2: The load carried on the roof, when equipped with a luggage rack, must not exceed 100 lb (45 kg), this includes the weight of the crossbars, and it should be uniformly distributed over the cargo area.', 'R3: 2. Crossbars should always be used whenever cargo is placed on the roof rack.', 'R4: 3. Check the straps frequently to be sure that the load remains securely attached.', 'R5: 4. Cargo must be securely tied down before driving your vehicle.', 'R6: 5. To avoid damage to the roof rack and vehicle, do not exceed the maximum roof rack load capacity.', 'R7: 6. Always distribute heavy loads as evenly as possible and secure the load appropriately.', 'R8: 7. Long loads, which extend over the windshield, should be secured to both the front and rear of the vehicle.', 'R9: 8. Place a blanket or other protection between the surface of the roof and the load.', 'R10: 9. Travel at reduced speeds and turn corners carefully when carrying large or heavy loads on the roof rack.', 'R11: 10. Load should always be secured to crossbars first, with tie down loops used as additional securing points if needed.'] | {'R1': 'Supported', 'R2': 'Supported', 'R3': 'Neither', 'R4': 'Supported', 'R5': 'Supported', 'R6': 'Supported', 'R7': 'Supported', 'R8': 'Supported', 'R9': 'Supported', 'R10': 'Supported', 'R11': 'Supported'} | No | false | 1 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
What should I pay attention to when putting cargo on top of the roof?
Manual information:
ROOF LUGGAGE RACK — IF EQUIPPED The Roof Luggage Rack is designed to allow for carrying an additional cargo load on vehicles equipped with a Hard Top. The load carried on the roof, when equipped with a luggage rack, must not exceed 100 lb (45 kg), this includes the weight of the crossbars, and it should be uniformly distributed over the cargo area. Crossbars should always be used whenever cargo is placed on the roof rack. Check the straps frequently to be sure that the load remains securely attached. External racks do not increase the total load carrying capacity of the vehicle. Be sure that the total occupant and luggage load inside the vehicle, plus the load on the luggage rack, does not exceed the maximum vehicle load capacity. Note: roof rack applications are for hard top models only. Note: Crossbars can be purchased at an authorized dealer through Mopar® parts. WARNING: Cargo must be securely tied down before driving your vehicle. Improperly secured loads can fly off the vehicle, particularly at high speeds, resulting in personal injury or property damage. Follow the roof rack cautions when carrying cargo on your roof rack. CAUTION: To avoid damage to the roof rack and vehicle, do not exceed the maximum roof rack load capacity. Always distribute heavy loads as evenly as possible and secure the load appropriately. Long loads, which extend over the windshield, should be secured to both the front and rear of the vehicle. Place a blanket or other protection between the surface of the roof and the load. Travel at reduced speeds and turn corners carefully when carrying large or heavy loads on the roof rack. Wind forces, due to natural causes or nearby truck traffic, can add sudden upward lift. It is recommended to not carry large flat loads, such as wood panels or surfboards, which may result in damage to the cargo or your vehicle. Load should always be secured to crossbars first, with tie down loops used as additional securing points if needed. Tie loops are intended as supplementary tie down points only. Do not use ratcheting mechanisms with the tie loops. Check the straps frequently to be sure that the load remains securely attached.
Answer to user's question:
|
dev_41 | Lucene Search | Can the Privacy of wireless and wired communications be assured? | Connected Vehicles Privacy of any wireless and wired communications cannot be assured. Third parties may unlawfully intercept information and private communications without your consent. For further information, refer to “Data Collection & Privacy” in your Uconnect Radio Instruction Manual or “Onboard Diagnostic System (OBD II) Cybersecurity”WARNING: It is not possible to know or to predict all of the possible outcomes if your vehicle’s systems are breached. It may be possible that vehicle systems, including safety related systems, could be impaired or a loss of vehicle control could occur that may result in an accident involving serious injury or death. | No, the privacy of wireless and wired communications cannot be assured in connected vehicles. Third parties may unlawfully intercept information and private communications without your consent, which could potentially lead to serious consequences such as impaired vehicle systems or loss of vehicle control resulting in accidents involving serious injury or death. It is important to refer to the "Data Collection & Privacy" section in your Uconnect Radio Instruction Manual or "Onboard Diagnostic System (OBD II) Cybersecurity" for further information. | ['R1: No, the privacy of wireless and wired communications cannot be assured in connected vehicles.', 'R2: Third parties may unlawfully intercept information and private communications without your consent, which could potentially lead to serious consequences such as impaired vehicle systems or loss of vehicle control resulting in accidents involving serious injury or death.', 'R3: It is important to refer to the "Data Collection & Privacy" section in your Uconnect Radio Instruction Manual or "Onboard Diagnostic System (OBD II) Cybersecurity" for further information.'] | {'R1': 'Supported', 'R2': 'Supported', 'R3': 'Supported'} | No | false | 1 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
Can the Privacy of wireless and wired communications be assured?
Manual information:
Connected Vehicles Privacy of any wireless and wired communications cannot be assured. Third parties may unlawfully intercept information and private communications without your consent. For further information, refer to “Data Collection & Privacy” in your Uconnect Radio Instruction Manual or “Onboard Diagnostic System (OBD II) Cybersecurity”WARNING: It is not possible to know or to predict all of the possible outcomes if your vehicle’s systems are breached. It may be possible that vehicle systems, including safety related systems, could be impaired or a loss of vehicle control could occur that may result in an accident involving serious injury or death.
Answer to user's question:
|
dev_42 | Ensemble Retriever (Base) | Can the Privacy of wireless and wired communications be assured? | Connected Vehicles Privacy of any wireless and wired communications cannot be assured. Third parties may unlawfully intercept information and private communications without your consent. For further information, refer to “Data Collection & Privacy” in your Uconnect Radio Instruction Manual or “Onboard Diagnostic System (OBD II) Cybersecurity” WARNING: It is not possible to know or to predict all of the possible outcomes if your vehicle’s systems are breached. It may be possible that vehicle systems, including safety related systems, could be impaired or a loss of vehicle control could occur that may result in an accident involving serious injury or death. | No, the privacy of wireless and wired communications cannot be assured in connected vehicles. Third parties may unlawfully intercept information and private communications without your consent. | ['R1: No, the privacy of wireless and wired communications cannot be assured in connected vehicles.', 'R2: Third parties may unlawfully intercept information and private communications without your consent.'] | {'R1': 'Supported', 'R2': 'Supported'} | No | false | 1 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
Can the Privacy of wireless and wired communications be assured?
Manual information:
Connected Vehicles Privacy of any wireless and wired communications cannot be assured. Third parties may unlawfully intercept information and private communications without your consent. For further information, refer to “Data Collection & Privacy” in your Uconnect Radio Instruction Manual or “Onboard Diagnostic System (OBD II) Cybersecurity” WARNING: It is not possible to know or to predict all of the possible outcomes if your vehicle’s systems are breached. It may be possible that vehicle systems, including safety related systems, could be impaired or a loss of vehicle control could occur that may result in an accident involving serious injury or death.
Answer to user's question:
|
dev_45 | Adaptive Ensemble Search | What will happen if I remain in the vehicle but open a door? | When any of these situations occur, after all open doors are closed, the FOBIK-Safe search will be executed. If it detects a Passive Entry key fob inside the vehicle, the vehicle will unlock and alert the customer. If Passive Entry is disabled using the Uconnect system, the key fob protection described in this section remains active/functional. When a door is open and the interior lights are on, rotating the instrument panel dimmer control to the extreme bottom position will cause all the interior lights to turn off. This allows the doors to stay open for extended periods of time without discharging the vehicle’s battery. Be sure the hood is fully latched before driving your vehicle. If the hood is not fully latched, it could open when the vehicle is in motion and block your vision. Failure to follow this warning could result in serious injury or death. The doors have to be open and then closed in order for the vehicle to check for the presence of a key fob; the Key Left Vehicle feature will not activate until all of the doors are closed. These alerts will not be activated in situations where the vehicle’s engine is left running with the key fob inside. | If you remain in the vehicle but open a door, the interior lights will turn on. However, if you rotate the instrument panel dimmer control to the extreme bottom position, all the interior lights will turn off. This will allow you to keep the doors open for an extended period of time without discharging the vehicle's battery. However, please note that if the Key Left Vehicle feature is enabled, it will not activate until all the doors are closed. Additionally, if the FOBIK-Safe search is executed and detects a Passive Entry key fob inside the vehicle, the vehicle will unlock and alert the customer. | ['R1: If you remain in the vehicle but open a door, the interior lights will turn on.', 'R2: However, if you rotate the instrument panel dimmer control to the extreme bottom position, all the interior lights will turn off.', "R3: This will allow you to keep the doors open for an extended period of time without discharging the vehicle's battery.", 'R4: However, please note that if the Key Left Vehicle feature is enabled, it will not activate until all the doors are closed.', 'R5: Additionally, if the FOBIK-Safe search is executed and detects a Passive Entry key fob inside the vehicle, the vehicle will unlock and alert the customer.'] | {'R1': 'Supported', 'R2': 'Supported', 'R3': 'Supported', 'R4': 'Supported', 'R5': 'Supported'} | No | false | 1 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
What will happen if I remain in the vehicle but open a door?
Manual information:
When any of these situations occur, after all open doors are closed, the FOBIK-Safe search will be executed. If it detects a Passive Entry key fob inside the vehicle, the vehicle will unlock and alert the customer. If Passive Entry is disabled using the Uconnect system, the key fob protection described in this section remains active/functional. When a door is open and the interior lights are on, rotating the instrument panel dimmer control to the extreme bottom position will cause all the interior lights to turn off. This allows the doors to stay open for extended periods of time without discharging the vehicle’s battery. Be sure the hood is fully latched before driving your vehicle. If the hood is not fully latched, it could open when the vehicle is in motion and block your vision. Failure to follow this warning could result in serious injury or death. The doors have to be open and then closed in order for the vehicle to check for the presence of a key fob; the Key Left Vehicle feature will not activate until all of the doors are closed. These alerts will not be activated in situations where the vehicle’s engine is left running with the key fob inside.
Answer to user's question:
|
dev_46 | Lucene Search | What's the function of TSC? | Trailer Sway Control (TSC) TSC uses sensors in the vehicle to recognize an excessively swaying trailer and will take the appropriate actions to attempt to stop the sway. When TSC is functioning, the ESC Activation/Malfunction Indicator Light will flash, the engine power may be reduced, and you may feel the brakes being applied to individual wheels to attempt to stop the trailer from swaying. TSC is disabled when the ESC system is in the “Partial Off” or “Full Off” modes. Note: TSC cannot stop all trailers from swaying. Always use caution when towing a trailer and follow the trailer tongue weight recommendations. See "⇨trailer towing" for further information. WARNING: If TSC activates while driving, slow the vehicle down, stop at the nearest safe location, and adjust the trailer load to eliminate trailer sway. | The function of Trailer Sway Control (TSC) is to recognize an excessively swaying trailer and take appropriate actions to attempt to stop the sway. When TSC is functioning, the ESC Activation/Malfunction Indicator Light will flash, the engine power may be reduced, and the brakes may be applied to individual wheels to attempt to stop the trailer from swaying. However, it's important to note that TSC cannot stop all trailers from swaying, and caution should always be used when towing a trailer. | ['R1: The function of Trailer Sway Control (TSC) is to recognize an excessively swaying trailer and take appropriate actions to attempt to stop the sway.', 'R2: When TSC is functioning, the ESC Activation/Malfunction Indicator Light will flash, the engine power may be reduced, and the brakes may be applied to individual wheels to attempt to stop the trailer from swaying.', "R3: However, it's important to note that TSC cannot stop all trailers from swaying, and caution should always be used when towing a trailer."] | {'R1': 'Supported', 'R2': 'Supported', 'R3': 'Supported'} | No | false | 1 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
What's the function of TSC?
Manual information:
Trailer Sway Control (TSC) TSC uses sensors in the vehicle to recognize an excessively swaying trailer and will take the appropriate actions to attempt to stop the sway. When TSC is functioning, the ESC Activation/Malfunction Indicator Light will flash, the engine power may be reduced, and you may feel the brakes being applied to individual wheels to attempt to stop the trailer from swaying. TSC is disabled when the ESC system is in the “Partial Off” or “Full Off” modes. Note: TSC cannot stop all trailers from swaying. Always use caution when towing a trailer and follow the trailer tongue weight recommendations. See "⇨trailer towing" for further information. WARNING: If TSC activates while driving, slow the vehicle down, stop at the nearest safe location, and adjust the trailer load to eliminate trailer sway.
Answer to user's question:
|
dev_47 | Adaptive Ensemble Search | What can the Uconnect system do? | The Uconnect system is a sophisticated electronic device. Do not let young children use the system. Permanent hearing loss may occur if you play your music or sound system at loud volumes. Exercise caution when setting the volume on the system. Keep drinks, rain and other sources of moisture away from the system. Besides damage to the system, moisture can cause electric shocks as with any electronic device. It is possible to have multiple devices connected to the Uconnect system. For example, if using Android Auto™/Apple CarPlay®, the connected device will be used to place hands-free phone calls or send hands-free text messages. However, another device can also be paired to the Uconnect system, via Bluetooth®, as an audio source, so the passenger can stream music. Uconnect Phone is a voice-activated, hands-free, in-vehicle communications system. It allows you to dial a phone number with your mobile phone. | The Uconnect system is a sophisticated electronic device that can do the following: 1. Connect multiple devices such as Android Auto™/Apple CarPlay® and Bluetooth® as an audio source. 2. Place hands-free phone calls or send hands-free text messages using a connected device. 3. Dial a phone number with your mobile phone using the Uconnect Phone, which is a voice-activated, hands-free, in-vehicle communications system. 4. Play music or sound system at a volume that should be set with caution to avoid permanent hearing loss. 5. Should be kept away from drinks, rain, and other sources of moisture to avoid damage to the system and electric shocks. | ['R1: The Uconnect system is a sophisticated electronic device that can do the following: 1.', 'R2: Connect multiple devices such as Android Auto™/Apple CarPlay® and Bluetooth® as an audio source.', 'R3: 2. Place hands-free phone calls or send hands-free text messages using a connected device.', 'R4: 3. Dial a phone number with your mobile phone using the Uconnect Phone, which is a voice-activated, hands-free, in-vehicle communications system.', 'R5: 4. Play music or sound system at a volume that should be set with caution to avoid permanent hearing loss.', 'R6: 5. Should be kept away from drinks, rain, and other sources of moisture to avoid damage to the system and electric shocks.'] | {'R1': 'Supported', 'R2': 'Supported', 'R3': 'Neither', 'R4': 'Supported', 'R5': 'Supported', 'R6': 'Supported'} | No | false | 1 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
What can the Uconnect system do?
Manual information:
The Uconnect system is a sophisticated electronic device. Do not let young children use the system. Permanent hearing loss may occur if you play your music or sound system at loud volumes. Exercise caution when setting the volume on the system. Keep drinks, rain and other sources of moisture away from the system. Besides damage to the system, moisture can cause electric shocks as with any electronic device. It is possible to have multiple devices connected to the Uconnect system. For example, if using Android Auto™/Apple CarPlay®, the connected device will be used to place hands-free phone calls or send hands-free text messages. However, another device can also be paired to the Uconnect system, via Bluetooth®, as an audio source, so the passenger can stream music. Uconnect Phone is a voice-activated, hands-free, in-vehicle communications system. It allows you to dial a phone number with your mobile phone.
Answer to user's question:
|
dev_48 | Ensemble Retriever | What can the Uconnect system do? | Safe Usage Of The Uconnect System The Uconnect system is a sophisticated electronic device. Do not let young children use the system. Permanent hearing loss may occur if you play your music or sound system at loud volumes. Exercise caution when setting the volume on the system. Keep drinks, rain and other sources of moisture away from the system. Besides damage to the system, moisture can cause electric shocks as with any electronic device. Note: Many features of this system are speed dependent. For your own safety, it is not possible to use some of the touchscreen features while the vehicle is in motion. Screen Activated Features Dialing via Keypad using touchscreen. Viewing and Calling contacts from Phonebooks displayed on the touchscreen. Setting Favorite Contact phone numbers so they are easily accessible on the Main Phone screen. Viewing and Calling contacts from Recent Call logs. Reviewing your recent Incoming SMS Messages. Pairing up to 10 phones/audio devices for easy access to connect to them quickly. Your mobile phone’s audio is transmitted through your vehicle’s audio system; the system will automatically mute your radio when using the Uconnect Phone. For uconnect customer support: us visit uconnectphone.com or call 877-855-8400 canada visit uconnectphone.com or call 800-465-2001 (english) or (french) call 800-387-9983 uconnect phone allows you to transfer calls between the system and your mobile phone as you enter or exit your vehicle and enables you to mute the system's microphone for private conversation. The Phone feature is driven through your Bluetooth® “Hands-Free Profile” mobile phone. Uconnect features Bluetooth® technology — the global standard that enables different electronic devices to connect to each other without wires or a docking station. Ensure you phone is turned on with Bluetooth® active and has been paired to the Uconnect system. Up to 10 mobile phones or audio devices are allowed to be linked to the system. Only one linked (or paired) mobile phone and one audio device can be used with the system at a time. Note: Your phone must be capable of SMS messaging via Bluetooth® for messaging features to work properly. WARNING: ALWAYS drive safely with your hands on the steering wheel. You have full responsibility and assume all risks related to the use of the Uconnect features and applications in this vehicle. Only use Uconnect when it is safe to do so. Failure to do so may result in an accident involving serious injury or death. Multiple Devices Connecting To The Uconnect System — If Equipped It is possible to have multiple devices connected to the Uconnect system. For example, if using Android Auto™/Apple CarPlay®, the connected device will be used to place hands-free phone calls or send hands-free text messages. However, another device can also be paired to the Uconnect system, via Bluetooth®, as an audio source, so the passenger can stream music. Note: Apple CarPlay® and Android Auto™ can only be launched from the front and center console USB ports. | The Uconnect system can do the following: - Dialing via Keypad using touchscreen. - Viewing and Calling contacts from Phonebooks displayed on the touchscreen. - Setting Favorite Contact phone numbers so they are easily accessible on the Main Phone screen. - Viewing and Calling contacts from Recent Call logs. - Reviewing your recent Incoming SMS Messages. - Pairing up to 10 phones/audio devices for easy access to connect to them quickly. - Transfer calls between the system and your mobile phone as you enter or exit your vehicle. - Mute the system's microphone for private conversation. - Transmit your mobile phone’s audio through your vehicle’s audio system. - Automatically mute your radio when using the Uconnect Phone. | ['R1: The Uconnect system can do the following: - Dialing via Keypad using touchscreen.', 'R2: - Viewing and Calling contacts from Phonebooks displayed on the touchscreen.', 'R3: - Setting Favorite Contact phone numbers so they are easily accessible on the Main Phone screen.', 'R4: - Viewing and Calling contacts from Recent Call logs.', 'R5: - Reviewing your recent Incoming SMS Messages.', 'R6: - Pairing up to 10 phones/audio devices for easy access to connect to them quickly.', 'R7: - Transfer calls between the system and your mobile phone as you enter or exit your vehicle.', "R8: - Mute the system's microphone for private conversation.", 'R9: - Transmit your mobile phone’s audio through your vehicle’s audio system.', 'R10: - Automatically mute your radio when using the Uconnect Phone.'] | {'R1': 'Supported', 'R2': 'Supported', 'R3': 'Supported', 'R4': 'Supported', 'R5': 'Supported', 'R6': 'Supported', 'R7': 'Supported', 'R8': 'Supported', 'R9': 'Supported', 'R10': 'Supported'} | No | false | 1 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
What can the Uconnect system do?
Manual information:
Safe Usage Of The Uconnect System The Uconnect system is a sophisticated electronic device. Do not let young children use the system. Permanent hearing loss may occur if you play your music or sound system at loud volumes. Exercise caution when setting the volume on the system. Keep drinks, rain and other sources of moisture away from the system. Besides damage to the system, moisture can cause electric shocks as with any electronic device. Note: Many features of this system are speed dependent. For your own safety, it is not possible to use some of the touchscreen features while the vehicle is in motion. Screen Activated Features Dialing via Keypad using touchscreen. Viewing and Calling contacts from Phonebooks displayed on the touchscreen. Setting Favorite Contact phone numbers so they are easily accessible on the Main Phone screen. Viewing and Calling contacts from Recent Call logs. Reviewing your recent Incoming SMS Messages. Pairing up to 10 phones/audio devices for easy access to connect to them quickly. Your mobile phone’s audio is transmitted through your vehicle’s audio system; the system will automatically mute your radio when using the Uconnect Phone. For uconnect customer support: us visit uconnectphone.com or call 877-855-8400 canada visit uconnectphone.com or call 800-465-2001 (english) or (french) call 800-387-9983 uconnect phone allows you to transfer calls between the system and your mobile phone as you enter or exit your vehicle and enables you to mute the system's microphone for private conversation. The Phone feature is driven through your Bluetooth® “Hands-Free Profile” mobile phone. Uconnect features Bluetooth® technology — the global standard that enables different electronic devices to connect to each other without wires or a docking station. Ensure you phone is turned on with Bluetooth® active and has been paired to the Uconnect system. Up to 10 mobile phones or audio devices are allowed to be linked to the system. Only one linked (or paired) mobile phone and one audio device can be used with the system at a time. Note: Your phone must be capable of SMS messaging via Bluetooth® for messaging features to work properly. WARNING: ALWAYS drive safely with your hands on the steering wheel. You have full responsibility and assume all risks related to the use of the Uconnect features and applications in this vehicle. Only use Uconnect when it is safe to do so. Failure to do so may result in an accident involving serious injury or death. Multiple Devices Connecting To The Uconnect System — If Equipped It is possible to have multiple devices connected to the Uconnect system. For example, if using Android Auto™/Apple CarPlay®, the connected device will be used to place hands-free phone calls or send hands-free text messages. However, another device can also be paired to the Uconnect system, via Bluetooth®, as an audio source, so the passenger can stream music. Note: Apple CarPlay® and Android Auto™ can only be launched from the front and center console USB ports.
Answer to user's question:
|
dev_50 | Ensemble Retriever (Base) | If the Vehicle Security Light turns on during driving, what does it mean and what should I do? | Service 4WD Warning Light — If Equipped This warning light will illuminate to signal a fault with the 4WD system. If the light stays on or comes on during driving, it means that the 4WD system is not functioning properly and that service is required. It is recommend you drive to the nearest service center and have the vehicle serviced immediately. | If the Vehicle Security Light turns on during driving, it means that there is a fault with the vehicle's security system. It is recommended that you consult your vehicle's owner's manual to determine the appropriate course of action. In some cases, the light may turn off on its own after a short period of time. However, if the light remains on or continues to flash, it is best to have the vehicle inspected by a qualified mechanic to diagnose and repair the issue. | ["R1: If the Vehicle Security Light turns on during driving, it means that there is a fault with the vehicle's security system.", "R2: It is recommended that you consult your vehicle's owner's manual to determine the appropriate course of action.", 'R3: In some cases, the light may turn off on its own after a short period of time.', 'R4: However, if the light remains on or continues to flash, it is best to have the vehicle inspected by a qualified mechanic to diagnose and repair the issue.'] | {'R1': 'Neither', 'R2': 'Conflicted', 'R3': 'Neither', 'R4': 'Neither'} | Yes | false | 0 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
If the Vehicle Security Light turns on during driving, what does it mean and what should I do?
Manual information:
Service 4WD Warning Light — If Equipped This warning light will illuminate to signal a fault with the 4WD system. If the light stays on or comes on during driving, it means that the 4WD system is not functioning properly and that service is required. It is recommend you drive to the nearest service center and have the vehicle serviced immediately.
Answer to user's question:
|
dev_51 | Adaptive Ensemble Search | If the Vehicle Security Light turns on during driving, what does it mean and what should I do? | Service 4WD Warning Light — If Equipped This warning light will illuminate to signal a fault with the 4WD system. If the light stays on or comes on during driving, it means that the 4WD system is not functioning properly and that service is required. It is recommend you drive to the nearest service center and have the vehicle serviced immediately. | If the Vehicle Security Light turns on during driving, it means that there is a problem with the vehicle's security system. Here are some possible reasons why the light may have turned on: 1. The key fob battery is low or dead. 2. The key fob is not programmed correctly. 3. The vehicle's security system is malfunctioning. If the light turns on, you should try the following steps: 1. Check the key fob battery and replace it if necessary. 2. Try using a different key fob if you have one. 3. If the light stays on, it is recommended that you take the vehicle to the nearest service center to have it checked by a professional. They will be able to diagnose the problem and recommend the appropriate repairs. | ["R1: If the Vehicle Security Light turns on during driving, it means that there is a problem with the vehicle's security system.", 'R2: Here are some possible reasons why the light may have turned on: 1.', 'R3: The key fob battery is low or dead.', 'R4: 2. The key fob is not programmed correctly.', "R5: 3. The vehicle's security system is malfunctioning.", 'R6: If the light turns on, you should try the following steps: 1.', 'R7: Check the key fob battery and replace it if necessary.', 'R8: 2. Try using a different key fob if you have one.', 'R9: 3. If the light stays on, it is recommended that you take the vehicle to the nearest service center to have it checked by a professional.', 'R10: They will be able to diagnose the problem and recommend the appropriate repairs.'] | {'R1': 'Supported', 'R2': 'Supported', 'R3': 'Neither', 'R4': 'Neither', 'R5': 'Supported', 'R6': 'Neither', 'R7': 'Neither', 'R8': 'Supported', 'R9': 'Neither', 'R10': 'Neither'} | Yes | false | 0 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
If the Vehicle Security Light turns on during driving, what does it mean and what should I do?
Manual information:
Service 4WD Warning Light — If Equipped This warning light will illuminate to signal a fault with the 4WD system. If the light stays on or comes on during driving, it means that the 4WD system is not functioning properly and that service is required. It is recommend you drive to the nearest service center and have the vehicle serviced immediately.
Answer to user's question:
|
dev_52 | Lucene Search | Where is button to activate heated steering wheel? | Heated Steering Wheel — If Equipped The steering wheel contains a heating element that helps warm your hands in cold weather. The heated steering wheel has only one temperature setting. Once the heated steering wheel has been turned on, it will stay on until the operator turns it off. The heated steering wheel may not turn on when it is already warm. The heated steering wheel button is located on the center of the instrument panel below the radio screen, and within the Climate or Controls screen of the touchscreen. Press the heated steering wheel button once to turn the heating element on. Press the heated steering wheel button a second time to turn the heating element off. For information on use with the Remote Start system, see Note: The engine must be running for the heated steering wheel to operate. WARNING: Persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury, medication, alcohol use, exhaustion, or other physical conditions must exercise care when using the steering wheel heater. It may cause burns even at low temperatures, especially if used for long periods. Do not place anything on the steering wheel that insulates against heat, such as a blanket or steering wheel covers of any type and material. This may cause the steering wheel heater to overheat. | The heated steering wheel button is located on the center of the instrument panel below the radio screen, and within the Climate or Controls screen of the touchscreen. You can press the button once to turn the heating element on and press it a second time to turn it off. | ['R1: The heated steering wheel button is located on the center of the instrument panel below the radio screen, and within the Climate or Controls screen of the touchscreen.', 'R2: You can press the button once to turn the heating element on and press it a second time to turn it off.'] | {'R1': 'Supported', 'R2': 'Supported'} | No | false | 1 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
Where is button to activate heated steering wheel?
Manual information:
Heated Steering Wheel — If Equipped The steering wheel contains a heating element that helps warm your hands in cold weather. The heated steering wheel has only one temperature setting. Once the heated steering wheel has been turned on, it will stay on until the operator turns it off. The heated steering wheel may not turn on when it is already warm. The heated steering wheel button is located on the center of the instrument panel below the radio screen, and within the Climate or Controls screen of the touchscreen. Press the heated steering wheel button once to turn the heating element on. Press the heated steering wheel button a second time to turn the heating element off. For information on use with the Remote Start system, see Note: The engine must be running for the heated steering wheel to operate. WARNING: Persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury, medication, alcohol use, exhaustion, or other physical conditions must exercise care when using the steering wheel heater. It may cause burns even at low temperatures, especially if used for long periods. Do not place anything on the steering wheel that insulates against heat, such as a blanket or steering wheel covers of any type and material. This may cause the steering wheel heater to overheat.
Answer to user's question:
|
dev_53 | Ensemble Retriever (Base) | What is so called TOP TIER Detergent Gasoline? | Materials Added To Fuel Besides using unleaded gasoline with the proper octane rating, gasolines that contain detergents, corrosion and stability additives are recommended. Using gasolines that have these additives will help improve fuel economy, reduce emissions, and maintain vehicle performance. Designated TOP TIER Detergent Gasoline contains a higher level of detergents to further aide in minimizing engine and fuel system deposits. When available, the usage of TOP TIER Detergent Gasoline is recommended. Visit www.toptiergas.com for a list of top tier detergent gasoline retailers. Indiscriminate use of fuel system cleaning agents should be avoided. Many of these materials intended for gum and varnish removal may contain active solvents or similar ingredients. These can harm fuel system gasket and diaphragm materials. | TOP TIER Detergent Gasoline is a type of gasoline that contains a higher level of detergents to minimize engine and fuel system deposits. It is recommended for use as it helps improve fuel economy, reduce emissions, and maintain vehicle performance. It is designated as TOP TIER because it meets a higher standard of fuel quality and cleanliness. You can find a list of TOP TIER Detergent Gasoline retailers on their website at www.toptiergas.com. | ['R1: TOP TIER Detergent Gasoline is a type of gasoline that contains a higher level of detergents to minimize engine and fuel system deposits.', 'R2: It is recommended for use as it helps improve fuel economy, reduce emissions, and maintain vehicle performance.', 'R3: It is designated as TOP TIER because it meets a higher standard of fuel quality and cleanliness.', 'R4: You can find a list of TOP TIER Detergent Gasoline retailers on their website at www.toptiergas.com.'] | {'R1': 'Supported', 'R2': 'Supported', 'R3': 'Neither', 'R4': 'Supported'} | Yes | false | 0 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
What is so called TOP TIER Detergent Gasoline?
Manual information:
Materials Added To Fuel Besides using unleaded gasoline with the proper octane rating, gasolines that contain detergents, corrosion and stability additives are recommended. Using gasolines that have these additives will help improve fuel economy, reduce emissions, and maintain vehicle performance. Designated TOP TIER Detergent Gasoline contains a higher level of detergents to further aide in minimizing engine and fuel system deposits. When available, the usage of TOP TIER Detergent Gasoline is recommended. Visit www.toptiergas.com for a list of top tier detergent gasoline retailers. Indiscriminate use of fuel system cleaning agents should be avoided. Many of these materials intended for gum and varnish removal may contain active solvents or similar ingredients. These can harm fuel system gasket and diaphragm materials.
Answer to user's question:
|
dev_54 | Adaptive Ensemble Search | What is so called TOP TIER Detergent Gasoline? | Materials Added To Fuel Besides using unleaded gasoline with the proper octane rating, gasolines that contain detergents, corrosion and stability additives are recommended. Using gasolines that have these additives will help improve fuel economy, reduce emissions, and maintain vehicle performance. Designated TOP TIER Detergent Gasoline contains a higher level of detergents to further aide in minimizing engine and fuel system deposits. When available, the usage of TOP TIER Detergent Gasoline is recommended. Visit www.toptiergas.com for a list of top tier detergent gasoline retailers. Indiscriminate use of fuel system cleaning agents should be avoided. Many of these materials intended for gum and varnish removal may contain active solvents or similar ingredients. These can harm fuel system gasket and diaphragm materials. | TOP TIER Detergent Gasoline is a type of gasoline that contains a higher level of detergents compared to regular gasoline. These detergents help to minimize engine and fuel system deposits, which can improve fuel economy, reduce emissions, and maintain vehicle performance. The use of TOP TIER Detergent Gasoline is recommended when available. You can visit www.toptiergas.com for a list of TOP TIER Detergent Gasoline retailers. | ['R1: TOP TIER Detergent Gasoline is a type of gasoline that contains a higher level of detergents compared to regular gasoline.', 'R2: These detergents help to minimize engine and fuel system deposits, which can improve fuel economy, reduce emissions, and maintain vehicle performance.', 'R3: The use of TOP TIER Detergent Gasoline is recommended when available.', 'R4: You can visit www.toptiergas.com for a list of TOP TIER Detergent Gasoline retailers.'] | {'R1': 'Supported', 'R2': 'Supported', 'R3': 'Neither', 'R4': 'Supported'} | No | false | 1 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
What is so called TOP TIER Detergent Gasoline?
Manual information:
Materials Added To Fuel Besides using unleaded gasoline with the proper octane rating, gasolines that contain detergents, corrosion and stability additives are recommended. Using gasolines that have these additives will help improve fuel economy, reduce emissions, and maintain vehicle performance. Designated TOP TIER Detergent Gasoline contains a higher level of detergents to further aide in minimizing engine and fuel system deposits. When available, the usage of TOP TIER Detergent Gasoline is recommended. Visit www.toptiergas.com for a list of top tier detergent gasoline retailers. Indiscriminate use of fuel system cleaning agents should be avoided. Many of these materials intended for gum and varnish removal may contain active solvents or similar ingredients. These can harm fuel system gasket and diaphragm materials.
Answer to user's question:
|
dev_55 | Lucene Search | What is so called TOP TIER Detergent Gasoline? | Materials Added To Fuel Besides using unleaded gasoline with the proper octane rating, gasolines that contain detergents, corrosion and stability additives are recommended. Using gasolines that have these additives will help improve fuel economy, reduce emissions, and maintain vehicle performance. Designated TOP TIER Detergent Gasoline contains a higher level of detergents to further aide in minimizing engine and fuel system deposits. When available, the usage of TOP TIER Detergent Gasoline is recommended. Visit www.toptiergas.com for a list of top tier detergent gasoline retailers. Indiscriminate use of fuel system cleaning agents should be avoided. Many of these materials intended for gum and varnish removal may contain active solvents or similar ingredients. These can harm fuel system gasket and diaphragm materials. | TOP TIER Detergent Gasoline is a type of gasoline that contains a higher level of detergents to minimize engine and fuel system deposits. It is recommended for use as it helps improve fuel economy, reduce emissions, and maintain vehicle performance. You can find a list of TOP TIER Detergent Gasoline retailers on their website at www.toptiergas.com. | ['R1: TOP TIER Detergent Gasoline is a type of gasoline that contains a higher level of detergents to minimize engine and fuel system deposits.', 'R2: It is recommended for use as it helps improve fuel economy, reduce emissions, and maintain vehicle performance.', 'R3: You can find a list of TOP TIER Detergent Gasoline retailers on their website at www.toptiergas.com.'] | {'R1': 'Supported', 'R2': 'Supported', 'R3': 'Supported'} | No | false | 1 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
What is so called TOP TIER Detergent Gasoline?
Manual information:
Materials Added To Fuel Besides using unleaded gasoline with the proper octane rating, gasolines that contain detergents, corrosion and stability additives are recommended. Using gasolines that have these additives will help improve fuel economy, reduce emissions, and maintain vehicle performance. Designated TOP TIER Detergent Gasoline contains a higher level of detergents to further aide in minimizing engine and fuel system deposits. When available, the usage of TOP TIER Detergent Gasoline is recommended. Visit www.toptiergas.com for a list of top tier detergent gasoline retailers. Indiscriminate use of fuel system cleaning agents should be avoided. Many of these materials intended for gum and varnish removal may contain active solvents or similar ingredients. These can harm fuel system gasket and diaphragm materials.
Answer to user's question:
|
dev_56 | Ensemble Retriever | what should I pay attention to when tightening the lug nuts/bolts? | Torque Specifications **Use only authorized dealer recommended lug nuts/bolts and clean or remove any dirt or oil before tightening. Inspect the wheel mounting surface prior to mounting the tire and remove any corrosion or loose particles. Tighten the lug nuts/bolts in a star pattern until each nut/bolt has been tightened twice. Ensure that the socket is fully engaged on the lug nut/bolt (do not insert it halfway). After 25 miles (40 km), check the lug nut/bolt torque to be sure that all the lug nuts/bolts are properly seated against the wheel. WARNING: To avoid the risk of forcing the vehicle off the jack, do not tighten the lug nuts/bolts fully until the vehicle has been lowered. Failure to follow this warning may result in personal injury. WHEEL AND TIRE TORQUE SPECIFICATIONS Proper lug nut/bolt torque is very important to ensure that the wheel is properly mounted to the vehicle. Any time a wheel has been removed and reinstalled on the vehicle, the lug nuts/bolts should be torqued using a properly calibrated torque wrench using a six-sided (hex) deep wall socket. Lug nut/bolt torque **lug nut/bolt size lug nut/bolt socket size 130 ft-lb (176 n·m) m14 x 1.50 mm 22 mm. | When tightening the lug nuts/bolts, you should pay attention to the following: 1. Use only authorized dealer recommended lug nuts/bolts. 2. Clean or remove any dirt or oil before tightening. 3. Inspect the wheel mounting surface prior to mounting the tire and remove any corrosion or loose particles. 4. Tighten the lug nuts/bolts in a star pattern until each nut/bolt has been tightened twice. 5. Ensure that the socket is fully engaged on the lug nut/bolt (do not insert it halfway). 6. After 25 miles (40 km), check the lug nut/bolt torque to be sure that all the lug nuts/bolts are properly seated against the wheel. 7. To avoid the risk of forcing the vehicle off the jack, do not tighten the lug nuts/bolts fully until the vehicle has been lowered. | ['R1: When tightening the lug nuts/bolts, you should pay attention to the following: 1.', 'R2: Use only authorized dealer recommended lug nuts/bolts.', 'R3: 2. Clean or remove any dirt or oil before tightening.', 'R4: 3. Inspect the wheel mounting surface prior to mounting the tire and remove any corrosion or loose particles.', 'R5: 4. Tighten the lug nuts/bolts in a star pattern until each nut/bolt has been tightened twice.', 'R6: 5. Ensure that the socket is fully engaged on the lug nut/bolt (do not insert it halfway).', 'R7: 6. After 25 miles (40 km), check the lug nut/bolt torque to be sure that all the lug nuts/bolts are properly seated against the wheel.', 'R8: 7. To avoid the risk of forcing the vehicle off the jack, do not tighten the lug nuts/bolts fully until the vehicle has been lowered.'] | {'R1': 'Supported', 'R2': 'Supported', 'R3': 'Supported', 'R4': 'Supported', 'R5': 'Supported', 'R6': 'Neither', 'R7': 'Supported', 'R8': 'Supported'} | No | false | 1 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
what should I pay attention to when tightening the lug nuts/bolts?
Manual information:
Torque Specifications **Use only authorized dealer recommended lug nuts/bolts and clean or remove any dirt or oil before tightening. Inspect the wheel mounting surface prior to mounting the tire and remove any corrosion or loose particles. Tighten the lug nuts/bolts in a star pattern until each nut/bolt has been tightened twice. Ensure that the socket is fully engaged on the lug nut/bolt (do not insert it halfway). After 25 miles (40 km), check the lug nut/bolt torque to be sure that all the lug nuts/bolts are properly seated against the wheel. WARNING: To avoid the risk of forcing the vehicle off the jack, do not tighten the lug nuts/bolts fully until the vehicle has been lowered. Failure to follow this warning may result in personal injury. WHEEL AND TIRE TORQUE SPECIFICATIONS Proper lug nut/bolt torque is very important to ensure that the wheel is properly mounted to the vehicle. Any time a wheel has been removed and reinstalled on the vehicle, the lug nuts/bolts should be torqued using a properly calibrated torque wrench using a six-sided (hex) deep wall socket. Lug nut/bolt torque **lug nut/bolt size lug nut/bolt socket size 130 ft-lb (176 n·m) m14 x 1.50 mm 22 mm.
Answer to user's question:
|
dev_57 | Adaptive Ensemble Search | what should I pay attention to when tightening the lug nuts/bolts? | Torque Specifications **Use only authorized dealer recommended lug nuts/bolts and clean or remove any dirt or oil before tightening. Inspect the wheel mounting surface prior to mounting the tire and remove any corrosion or loose particles. Tighten the lug nuts/bolts in a star pattern until each nut/bolt has been tightened twice. Ensure that the socket is fully engaged on the lug nut/bolt (do not insert it halfway). After 25 miles (40 km), check the lug nut/bolt torque to be sure that all the lug nuts/bolts are properly seated against the wheel. WARNING: To avoid the risk of forcing the vehicle off the jack, do not tighten the lug nuts/bolts fully until the vehicle has been lowered. Failure to follow this warning may result in personal injury. | When tightening the lug nuts/bolts, you should pay attention to the following: 1. Use only authorized dealer recommended lug nuts/bolts. 2. Clean or remove any dirt or oil before tightening. 3. Inspect the wheel mounting surface prior to mounting the tire and remove any corrosion or loose particles. 4. Tighten the lug nuts/bolts in a star pattern until each nut/bolt has been tightened twice. 5. Ensure that the socket is fully engaged on the lug nut/bolt (do not insert it halfway). 6. After 25 miles (40 km), check the lug nut/bolt torque to be sure that all the lug nuts/bolts are properly seated against the wheel. 7. To avoid the risk of forcing the vehicle off the jack, do not tighten the lug nuts/bolts fully until the vehicle has been lowered. | ['R1: When tightening the lug nuts/bolts, you should pay attention to the following: 1.', 'R2: Use only authorized dealer recommended lug nuts/bolts.', 'R3: 2. Clean or remove any dirt or oil before tightening.', 'R4: 3. Inspect the wheel mounting surface prior to mounting the tire and remove any corrosion or loose particles.', 'R5: 4. Tighten the lug nuts/bolts in a star pattern until each nut/bolt has been tightened twice.', 'R6: 5. Ensure that the socket is fully engaged on the lug nut/bolt (do not insert it halfway).', 'R7: 6. After 25 miles (40 km), check the lug nut/bolt torque to be sure that all the lug nuts/bolts are properly seated against the wheel.', 'R8: 7. To avoid the risk of forcing the vehicle off the jack, do not tighten the lug nuts/bolts fully until the vehicle has been lowered.'] | {'R1': 'Supported', 'R2': 'Supported', 'R3': 'Supported', 'R4': 'Supported', 'R5': 'Supported', 'R6': 'Supported', 'R7': 'Supported', 'R8': 'Supported'} | No | false | 1 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
what should I pay attention to when tightening the lug nuts/bolts?
Manual information:
Torque Specifications **Use only authorized dealer recommended lug nuts/bolts and clean or remove any dirt or oil before tightening. Inspect the wheel mounting surface prior to mounting the tire and remove any corrosion or loose particles. Tighten the lug nuts/bolts in a star pattern until each nut/bolt has been tightened twice. Ensure that the socket is fully engaged on the lug nut/bolt (do not insert it halfway). After 25 miles (40 km), check the lug nut/bolt torque to be sure that all the lug nuts/bolts are properly seated against the wheel. WARNING: To avoid the risk of forcing the vehicle off the jack, do not tighten the lug nuts/bolts fully until the vehicle has been lowered. Failure to follow this warning may result in personal injury.
Answer to user's question:
|
dev_58 | Lucene Search | what should I pay attention to when tightening the lug nuts/bolts? | Torque Specifications **Use only authorized dealer recommended lug nuts/bolts and clean or remove any dirt or oil before tightening. Inspect the wheel mounting surface prior to mounting the tire and remove any corrosion or loose particles. Tighten the lug nuts/bolts in a star pattern until each nut/bolt has been tightened twice. Ensure that the socket is fully engaged on the lug nut/bolt (do not insert it halfway). After 25 miles (40 km), check the lug nut/bolt torque to be sure that all the lug nuts/bolts are properly seated against the wheel. WARNING: To avoid the risk of forcing the vehicle off the jack, do not tighten the lug nuts/bolts fully until the vehicle has been lowered. Failure to follow this warning may result in personal injury. | When tightening the lug nuts/bolts, you should pay attention to the following: 1. Use only authorized dealer recommended lug nuts/bolts. 2. Clean or remove any dirt or oil before tightening. 3. Inspect the wheel mounting surface prior to mounting the tire and remove any corrosion or loose particles. 4. Tighten the lug nuts/bolts in a star pattern until each nut/bolt has been tightened twice. 5. Ensure that the socket is fully engaged on the lug nut/bolt (do not insert it halfway). 6. After 25 miles (40 km), check the lug nut/bolt torque to be sure that all the lug nuts/bolts are properly seated against the wheel. 7. Do not tighten the lug nuts/bolts fully until the vehicle has been lowered to avoid the risk of forcing the vehicle off the jack. | ['R1: When tightening the lug nuts/bolts, you should pay attention to the following: 1.', 'R2: Use only authorized dealer recommended lug nuts/bolts.', 'R3: 2. Clean or remove any dirt or oil before tightening.', 'R4: 3. Inspect the wheel mounting surface prior to mounting the tire and remove any corrosion or loose particles.', 'R5: 4. Tighten the lug nuts/bolts in a star pattern until each nut/bolt has been tightened twice.', 'R6: 5. Ensure that the socket is fully engaged on the lug nut/bolt (do not insert it halfway).', 'R7: 6. After 25 miles (40 km), check the lug nut/bolt torque to be sure that all the lug nuts/bolts are properly seated against the wheel.', 'R8: 7. Do not tighten the lug nuts/bolts fully until the vehicle has been lowered to avoid the risk of forcing the vehicle off the jack.'] | {'R1': 'Supported', 'R2': 'Supported', 'R3': 'Supported', 'R4': 'Supported', 'R5': 'Supported', 'R6': 'Supported', 'R7': 'Supported', 'R8': 'Supported'} | No | false | 1 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
what should I pay attention to when tightening the lug nuts/bolts?
Manual information:
Torque Specifications **Use only authorized dealer recommended lug nuts/bolts and clean or remove any dirt or oil before tightening. Inspect the wheel mounting surface prior to mounting the tire and remove any corrosion or loose particles. Tighten the lug nuts/bolts in a star pattern until each nut/bolt has been tightened twice. Ensure that the socket is fully engaged on the lug nut/bolt (do not insert it halfway). After 25 miles (40 km), check the lug nut/bolt torque to be sure that all the lug nuts/bolts are properly seated against the wheel. WARNING: To avoid the risk of forcing the vehicle off the jack, do not tighten the lug nuts/bolts fully until the vehicle has been lowered. Failure to follow this warning may result in personal injury.
Answer to user's question:
|
dev_59 | Ensemble Retriever (Base) | what should I pay attention to when tightening the lug nuts/bolts? | Torque Specifications **Use only authorized dealer recommended lug nuts/bolts and clean or remove any dirt or oil before tightening. Inspect the wheel mounting surface prior to mounting the tire and remove any corrosion or loose particles. Tighten the lug nuts/bolts in a star pattern until each nut/bolt has been tightened twice. Ensure that the socket is fully engaged on the lug nut/bolt (do not insert it halfway). After 25 miles (40 km), check the lug nut/bolt torque to be sure that all the lug nuts/bolts are properly seated against the wheel. WARNING: To avoid the risk of forcing the vehicle off the jack, do not tighten the lug nuts/bolts fully until the vehicle has been lowered. Failure to follow this warning may result in personal injury. | When tightening the lug nuts/bolts, you should pay attention to the following: 1. Use only authorized dealer recommended lug nuts/bolts. 2. Clean or remove any dirt or oil before tightening. 3. Inspect the wheel mounting surface prior to mounting the tire and remove any corrosion or loose particles. 4. Tighten the lug nuts/bolts in a star pattern until each nut/bolt has been tightened twice. 5. Ensure that the socket is fully engaged on the lug nut/bolt (do not insert it halfway). 6. After 25 miles (40 km), check the lug nut/bolt torque to be sure that all the lug nuts/bolts are properly seated against the wheel. 7. To avoid the risk of forcing the vehicle off the jack, do not tighten the lug nuts/bolts fully until the vehicle has been lowered. Failure to follow this warning may result in personal injury. | ['R1: When tightening the lug nuts/bolts, you should pay attention to the following: 1.', 'R2: Use only authorized dealer recommended lug nuts/bolts.', 'R3: 2. Clean or remove any dirt or oil before tightening.', 'R4: 3. Inspect the wheel mounting surface prior to mounting the tire and remove any corrosion or loose particles.', 'R5: 4. Tighten the lug nuts/bolts in a star pattern until each nut/bolt has been tightened twice.', 'R6: 5. Ensure that the socket is fully engaged on the lug nut/bolt (do not insert it halfway).', 'R7: 6. After 25 miles (40 km), check the lug nut/bolt torque to be sure that all the lug nuts/bolts are properly seated against the wheel.', 'R8: 7. To avoid the risk of forcing the vehicle off the jack, do not tighten the lug nuts/bolts fully until the vehicle has been lowered.', 'R9: Failure to follow this warning may result in personal injury.'] | {'R1': 'Neither', 'R2': 'Supported', 'R3': 'Supported', 'R4': 'Supported', 'R5': 'Supported', 'R6': 'Supported', 'R7': 'Supported', 'R8': 'Supported', 'R9': 'Neither'} | Yes | false | 0 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
what should I pay attention to when tightening the lug nuts/bolts?
Manual information:
Torque Specifications **Use only authorized dealer recommended lug nuts/bolts and clean or remove any dirt or oil before tightening. Inspect the wheel mounting surface prior to mounting the tire and remove any corrosion or loose particles. Tighten the lug nuts/bolts in a star pattern until each nut/bolt has been tightened twice. Ensure that the socket is fully engaged on the lug nut/bolt (do not insert it halfway). After 25 miles (40 km), check the lug nut/bolt torque to be sure that all the lug nuts/bolts are properly seated against the wheel. WARNING: To avoid the risk of forcing the vehicle off the jack, do not tighten the lug nuts/bolts fully until the vehicle has been lowered. Failure to follow this warning may result in personal injury.
Answer to user's question:
|
dev_60 | Adaptive Ensemble Search | How can I avoid fuel overfilling? | Emergency Gas Can Refueling Most gas cans will not open the flapper doors. A funnel is provided to allow emergency refueling with a gas can. See the following steps for refueling: Retrieve funnel from under the right rear seat. Fuel funnel location refueling funnel remove the fuel filler cap and insert the funnel into same filler pipe opening as the fuel nozzle. Inserting funnel ensure funnel is inserted fully to hold flapper doors open. Pour fuel into funnel opening. Caution: to avoid fuel spillage and overfilling, do not “top off” the fuel tank after filling. Remove funnel from filler pipe, clean off prior to putting back in the spare tire storage area. Tighten the fuel filler cap until clicking is heard. This is an indication the cap is properly tightened. WARNING: Never have any smoking materials lit in or near the vehicle when the fuel door is open or the tank is being filled. Never add fuel when the engine is running. This is in violation of most state and federal fire regulations and may cause the Malfunction Indicator Light to turn on. A fire may result if fuel is pumped into a portable container that is inside of a vehicle. You could be burned. Always place fuel containers on the ground while filling. | To avoid fuel spillage and overfilling, do not “top off” the fuel tank after filling. This means that you should stop filling the tank once the fuel pump automatically shuts off, and not try to add more fuel to the tank. | ['R1: To avoid fuel spillage and overfilling, do not “top off” the fuel tank after filling.', 'R2: This means that you should stop filling the tank once the fuel pump automatically shuts off, and not try to add more fuel to the tank.'] | {'R1': 'Supported', 'R2': 'Supported'} | No | false | 1 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
How can I avoid fuel overfilling?
Manual information:
Emergency Gas Can Refueling Most gas cans will not open the flapper doors. A funnel is provided to allow emergency refueling with a gas can. See the following steps for refueling: Retrieve funnel from under the right rear seat. Fuel funnel location refueling funnel remove the fuel filler cap and insert the funnel into same filler pipe opening as the fuel nozzle. Inserting funnel ensure funnel is inserted fully to hold flapper doors open. Pour fuel into funnel opening. Caution: to avoid fuel spillage and overfilling, do not “top off” the fuel tank after filling. Remove funnel from filler pipe, clean off prior to putting back in the spare tire storage area. Tighten the fuel filler cap until clicking is heard. This is an indication the cap is properly tightened. WARNING: Never have any smoking materials lit in or near the vehicle when the fuel door is open or the tank is being filled. Never add fuel when the engine is running. This is in violation of most state and federal fire regulations and may cause the Malfunction Indicator Light to turn on. A fire may result if fuel is pumped into a portable container that is inside of a vehicle. You could be burned. Always place fuel containers on the ground while filling.
Answer to user's question:
|
dev_62 | Lucene Search | What is the highest grade of a tire? | Traction Grades The Traction grades, from highest to lowest, are AA, A, B, and C. These grades represent the tire's ability to stop on wet pavement, as measured under controlled conditions on specified government test surfaces of asphalt and concrete. A tire marked C may have poor traction performance. WARNING: The traction grade assigned to this tire is based on straight-ahead braking traction tests, and does not include acceleration, cornering, hydroplaning, or peak traction characteristics. | The highest grade of a tire is AA. | ['R1: The highest grade of a tire is AA.'] | {'R1': 'Supported'} | No | false | 1 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
What is the highest grade of a tire?
Manual information:
Traction Grades The Traction grades, from highest to lowest, are AA, A, B, and C. These grades represent the tire's ability to stop on wet pavement, as measured under controlled conditions on specified government test surfaces of asphalt and concrete. A tire marked C may have poor traction performance. WARNING: The traction grade assigned to this tire is based on straight-ahead braking traction tests, and does not include acceleration, cornering, hydroplaning, or peak traction characteristics.
Answer to user's question:
|
dev_63 | Lucene Search | Is it dangerous to pump fuel into a portable container in the car? | Emergency Gas Can Refueling Most gas cans will not open the flapper doors. A funnel is provided to allow emergency refueling with a gas can. See the following steps for refueling: Retrieve funnel from under the right rear seat. Fuel funnel location refueling funnel remove the fuel filler cap and insert the funnel into same filler pipe opening as the fuel nozzle. Inserting funnel ensure funnel is inserted fully to hold flapper doors open. Pour fuel into funnel opening. Caution: to avoid fuel spillage and overfilling, do not “top off” the fuel tank after filling. Remove funnel from filler pipe, clean off prior to putting back in the spare tire storage area. Tighten the fuel filler cap until clicking is heard. This is an indication the cap is properly tightened. WARNING: Never have any smoking materials lit in or near the vehicle when the fuel door is open or the tank is being filled. Never add fuel when the engine is running. This is in violation of most state and federal fire regulations and may cause the Malfunction Indicator Light to turn on. A fire may result if fuel is pumped into a portable container that is inside of a vehicle. You could be burned. Always place fuel containers on the ground while filling. | Yes, it is dangerous to pump fuel into a portable container that is inside a vehicle. This could result in a fire and cause harm to the occupants of the vehicle. It is recommended to always place fuel containers on the ground while filling them. | ['R1: Yes, it is dangerous to pump fuel into a portable container that is inside a vehicle.', 'R2: This could result in a fire and cause harm to the occupants of the vehicle.', 'R3: It is recommended to always place fuel containers on the ground while filling them.'] | {'R1': 'Supported', 'R2': 'Supported', 'R3': 'Supported'} | No | false | 1 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
Is it dangerous to pump fuel into a portable container in the car?
Manual information:
Emergency Gas Can Refueling Most gas cans will not open the flapper doors. A funnel is provided to allow emergency refueling with a gas can. See the following steps for refueling: Retrieve funnel from under the right rear seat. Fuel funnel location refueling funnel remove the fuel filler cap and insert the funnel into same filler pipe opening as the fuel nozzle. Inserting funnel ensure funnel is inserted fully to hold flapper doors open. Pour fuel into funnel opening. Caution: to avoid fuel spillage and overfilling, do not “top off” the fuel tank after filling. Remove funnel from filler pipe, clean off prior to putting back in the spare tire storage area. Tighten the fuel filler cap until clicking is heard. This is an indication the cap is properly tightened. WARNING: Never have any smoking materials lit in or near the vehicle when the fuel door is open or the tank is being filled. Never add fuel when the engine is running. This is in violation of most state and federal fire regulations and may cause the Malfunction Indicator Light to turn on. A fire may result if fuel is pumped into a portable container that is inside of a vehicle. You could be burned. Always place fuel containers on the ground while filling.
Answer to user's question:
|
dev_64 | Ensemble Retriever (Base) | Is it dangerous to pump fuel into a portable container in the car? | Emergency Gas Can Refueling Most gas cans will not open the flapper doors. A funnel is provided to allow emergency refueling with a gas can. See the following steps for refueling: Retrieve funnel from under the right rear seat. Fuel funnel location refueling funnel remove the fuel filler cap and insert the funnel into same filler pipe opening as the fuel nozzle. Inserting funnel ensure funnel is inserted fully to hold flapper doors open. Pour fuel into funnel opening. Caution: to avoid fuel spillage and overfilling, do not “top off” the fuel tank after filling. Remove funnel from filler pipe, clean off prior to putting back in the spare tire storage area. Tighten the fuel filler cap until clicking is heard. This is an indication the cap is properly tightened. WARNING: Never have any smoking materials lit in or near the vehicle when the fuel door is open or the tank is being filled. Never add fuel when the engine is running. This is in violation of most state and federal fire regulations and may cause the Malfunction Indicator Light to turn on. A fire may result if fuel is pumped into a portable container that is inside of a vehicle. You could be burned. Always place fuel containers on the ground while filling. | Yes, it is dangerous to pump fuel into a portable container that is inside of a vehicle. This could result in a fire and cause harm to the person pumping the fuel. It is recommended to always place fuel containers on the ground while filling. | ['R1: Yes, it is dangerous to pump fuel into a portable container that is inside of a vehicle.', 'R2: This could result in a fire and cause harm to the person pumping the fuel.', 'R3: It is recommended to always place fuel containers on the ground while filling.'] | {'R1': 'Supported', 'R2': 'Supported', 'R3': 'Supported'} | No | false | 1 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
Is it dangerous to pump fuel into a portable container in the car?
Manual information:
Emergency Gas Can Refueling Most gas cans will not open the flapper doors. A funnel is provided to allow emergency refueling with a gas can. See the following steps for refueling: Retrieve funnel from under the right rear seat. Fuel funnel location refueling funnel remove the fuel filler cap and insert the funnel into same filler pipe opening as the fuel nozzle. Inserting funnel ensure funnel is inserted fully to hold flapper doors open. Pour fuel into funnel opening. Caution: to avoid fuel spillage and overfilling, do not “top off” the fuel tank after filling. Remove funnel from filler pipe, clean off prior to putting back in the spare tire storage area. Tighten the fuel filler cap until clicking is heard. This is an indication the cap is properly tightened. WARNING: Never have any smoking materials lit in or near the vehicle when the fuel door is open or the tank is being filled. Never add fuel when the engine is running. This is in violation of most state and federal fire regulations and may cause the Malfunction Indicator Light to turn on. A fire may result if fuel is pumped into a portable container that is inside of a vehicle. You could be burned. Always place fuel containers on the ground while filling.
Answer to user's question:
|
dev_65 | Adaptive Ensemble Search | Can you tell me instructions about how to reset the Manual Park Release? | To Reset The Manual Park Release: Pull upward on the tether strap, releasing it from the “locked” position. Lower the Manual Park Release lever downward into its original position. Original tether position tuck the tether strap into the base of the console, and reinstall the cover. | Sure, here are the step-by-step instructions to reset the Manual Park Release: 1. Pull upward on the tether strap, releasing it from the “locked” position. 2. Lower the Manual Park Release lever downward into its original position. 3. Tuck the tether strap into the base of the console. 4. Reinstall the cover. It's important to note that these instructions may vary slightly depending on the make and model of your vehicle. If you're unsure about any of the steps, it's always best to consult your vehicle's owner manual or contact a certified mechanic for assistance. | ['R1: Sure, here are the step-by-step instructions to reset the Manual Park Release: 1.', 'R2: Pull upward on the tether strap, releasing it from the “locked” position.', 'R3: 2. Lower the Manual Park Release lever downward into its original position.', 'R4: 3. Tuck the tether strap into the base of the console.', 'R5: 4. Reinstall the cover.', "R6: It's important to note that these instructions may vary slightly depending on the make and model of your vehicle.", "R7: If you're unsure about any of the steps, it's always best to consult your vehicle's owner manual or contact a certified mechanic for assistance."] | {'R1': 'Supported', 'R2': 'Supported', 'R3': 'Supported', 'R4': 'Supported', 'R5': 'Supported', 'R6': 'Neither', 'R7': 'Neither'} | Yes | false | 0 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
Can you tell me instructions about how to reset the Manual Park Release?
Manual information:
To Reset The Manual Park Release: Pull upward on the tether strap, releasing it from the “locked” position. Lower the Manual Park Release lever downward into its original position. Original tether position tuck the tether strap into the base of the console, and reinstall the cover.
Answer to user's question:
|
dev_66 | Lucene Search | Can you tell me instructions about how to reset the Manual Park Release? | To Reset The Manual Park Release: Pull upward on the tether strap, releasing it from the “locked” position. Lower the Manual Park Release lever downward into its original position. Original tether position tuck the tether strap into the base of the console, and reinstall the cover. | Sure, here are the instructions to reset the Manual Park Release: 1. Pull upward on the tether strap, releasing it from the “locked” position. 2. Lower the Manual Park Release lever downward into its original position. 3. Tuck the tether strap into the base of the console. 4. Reinstall the cover. Make sure to follow these steps carefully and ensure that the Manual Park Release lever is securely in its original position before driving the vehicle. | ['R1: Sure, here are the instructions to reset the Manual Park Release: 1.', 'R2: Pull upward on the tether strap, releasing it from the “locked” position.', 'R3: 2. Lower the Manual Park Release lever downward into its original position.', 'R4: 3. Tuck the tether strap into the base of the console.', 'R5: 4. Reinstall the cover.', 'R6: Make sure to follow these steps carefully and ensure that the Manual Park Release lever is securely in its original position before driving the vehicle.'] | {'R1': 'Neither', 'R2': 'Supported', 'R3': 'Supported', 'R4': 'Supported', 'R5': 'Supported', 'R6': 'Neither'} | Yes | false | 0 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
Can you tell me instructions about how to reset the Manual Park Release?
Manual information:
To Reset The Manual Park Release: Pull upward on the tether strap, releasing it from the “locked” position. Lower the Manual Park Release lever downward into its original position. Original tether position tuck the tether strap into the base of the console, and reinstall the cover.
Answer to user's question:
|
dev_67 | Ensemble Retriever (Base) | Can you tell me instructions about how to reset the Manual Park Release? | To Reset The Manual Park Release: Pull upward on the tether strap, releasing it from the “locked” position. Lower the Manual Park Release lever downward into its original position. Original tether position tuck the tether strap into the base of the console, and reinstall the cover. | Sure, here are the instructions to reset the Manual Park Release: 1. Pull upward on the tether strap, releasing it from the “locked” position. 2. Lower the Manual Park Release lever downward into its original position. 3. Tuck the tether strap into the base of the console. 4. Reinstall the cover. These steps should reset the Manual Park Release. | ['R1: Sure, here are the instructions to reset the Manual Park Release: 1.', 'R2: Pull upward on the tether strap, releasing it from the “locked” position.', 'R3: 2. Lower the Manual Park Release lever downward into its original position.', 'R4: 3. Tuck the tether strap into the base of the console.', 'R5: 4. Reinstall the cover.', 'R6: These steps should reset the Manual Park Release.'] | {'R1': 'Supported', 'R2': 'Supported', 'R3': 'Supported', 'R4': 'Supported', 'R5': 'Supported', 'R6': 'Supported'} | No | false | 1 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
Can you tell me instructions about how to reset the Manual Park Release?
Manual information:
To Reset The Manual Park Release: Pull upward on the tether strap, releasing it from the “locked” position. Lower the Manual Park Release lever downward into its original position. Original tether position tuck the tether strap into the base of the console, and reinstall the cover.
Answer to user's question:
|
dev_68 | Adaptive Ensemble Search | What is special about power windows? | The power windows feature allows for movement of the windows with the push of a button. The power window switches are located on the instrument panel below the climate controls. Push the switch downward to open the window and pull upward to close the window. The driver door power window switch and the front passenger door power window switch have an Auto-Down feature. Push the window switch down, past the detent, and release and the window will go down automatically. Power Window Switches Never leave children unattended in a vehicle, and do not let children play with power windows. Do not leave the key fob in or near the vehicle, or in a location accessible to children. Occupants, particularly unattended children, can become entrapped by the windows while operating the power window switches. Such entrapment may result in serious injury or death. The power window switches will remain active for up to 10 minutes after the ignition is placed in the OFF position. Opening either front door will cancel this feature. There are window switches located on the rear of the center console for the rear passenger windows. | Power windows allow for movement of the windows with the push of a button, making it easier and more convenient to open and close windows. Additionally, the driver door power window switch and the front passenger door power window switch have an Auto-Down feature, which allows the window to go down automatically when the switch is pushed down past the detent and released. However, it is important to note that power windows can be dangerous, particularly for children, and should not be left unattended or played with. The power window switches will also remain active for up to 10 minutes after the ignition is turned off, but opening either front door will cancel this feature. | ['R1: Power windows allow for movement of the windows with the push of a button, making it easier and more convenient to open and close windows.', 'R2: Additionally, the driver door power window switch and the front passenger door power window switch have an Auto-Down feature, which allows the window to go down automatically when the switch is pushed down past the detent and released.', 'R3: However, it is important to note that power windows can be dangerous, particularly for children, and should not be left unattended or played with.', 'R4: The power window switches will also remain active for up to 10 minutes after the ignition is turned off, but opening either front door will cancel this feature.'] | {'R1': 'Supported', 'R2': 'Supported', 'R3': 'Supported', 'R4': 'Supported'} | No | false | 1 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
What is special about power windows?
Manual information:
The power windows feature allows for movement of the windows with the push of a button. The power window switches are located on the instrument panel below the climate controls. Push the switch downward to open the window and pull upward to close the window. The driver door power window switch and the front passenger door power window switch have an Auto-Down feature. Push the window switch down, past the detent, and release and the window will go down automatically. Power Window Switches Never leave children unattended in a vehicle, and do not let children play with power windows. Do not leave the key fob in or near the vehicle, or in a location accessible to children. Occupants, particularly unattended children, can become entrapped by the windows while operating the power window switches. Such entrapment may result in serious injury or death. The power window switches will remain active for up to 10 minutes after the ignition is placed in the OFF position. Opening either front door will cancel this feature. There are window switches located on the rear of the center console for the rear passenger windows.
Answer to user's question:
|
dev_69 | Adaptive Ensemble Search | what benefits can the Trac-Lok rear axle bring? | Trac-Lok Rear Axle — If Equipped The Trac-Lok rear axle provides a constant driving force to both rear wheels and reduces wheel spin caused by the loss of traction at one driving wheel. If traction differs between the two rear wheels, the differential automatically proportions the usable torque by providing more torque to the wheel that has traction. Trac-Lok is especially helpful during slippery driving conditions. With both rear wheels on a slippery surface, a slight application of the accelerator will supply maximum traction. WARNING: On vehicles equipped with a limited-slip differential, never run the engine with one rear wheel off the ground. The vehicle may drive through the rear wheel remaining on the ground and cause you to lose control of your vehicle. | The Trac-Lok rear axle provides a constant driving force to both rear wheels, reduces wheel spin caused by the loss of traction at one driving wheel, and automatically proportions the usable torque by providing more torque to the wheel that has traction. This feature is especially helpful during slippery driving conditions, as it allows for maximum traction with both rear wheels on a slippery surface. | ['R1: The Trac-Lok rear axle provides a constant driving force to both rear wheels, reduces wheel spin caused by the loss of traction at one driving wheel, and automatically proportions the usable torque by providing more torque to the wheel that has traction.', 'R2: This feature is especially helpful during slippery driving conditions, as it allows for maximum traction with both rear wheels on a slippery surface.'] | {'R1': 'Supported', 'R2': 'Supported'} | No | false | 1 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
what benefits can the Trac-Lok rear axle bring?
Manual information:
Trac-Lok Rear Axle — If Equipped The Trac-Lok rear axle provides a constant driving force to both rear wheels and reduces wheel spin caused by the loss of traction at one driving wheel. If traction differs between the two rear wheels, the differential automatically proportions the usable torque by providing more torque to the wheel that has traction. Trac-Lok is especially helpful during slippery driving conditions. With both rear wheels on a slippery surface, a slight application of the accelerator will supply maximum traction. WARNING: On vehicles equipped with a limited-slip differential, never run the engine with one rear wheel off the ground. The vehicle may drive through the rear wheel remaining on the ground and cause you to lose control of your vehicle.
Answer to user's question:
|
dev_70 | Lucene Search | Can the mirrors automatically adjust their positions based on surrounding situations, e.g., headlight glare from behind? | Automatic Dimming Mirror — If Equipped The rearview mirror can be adjusted up, down, left, and right. The mirror should be adjusted to center on the view through the rear window. This mirror automatically adjusts for headlight glare from vehicles behind you. The Automatic Dimming feature can be turned on or off through the Uconnect Controls button on the touchscreen. Note: The Automatic Dimming Mirror feature is disabled when the vehicle is in REVERSE to improve the driver’s rear view. CAUTION: To avoid damage to the mirror during cleaning, never spray any cleaning solution directly onto the mirror. Apply the solution onto a clean cloth and wipe the mirror clean. | Yes, the Automatic Dimming Mirror feature can automatically adjust its position to reduce headlight glare from vehicles behind you. This feature can be turned on or off through the Uconnect Controls button on the touchscreen. However, it is important to note that this feature is disabled when the vehicle is in REVERSE to improve the driver's rear view. | ['R1: Yes, the Automatic Dimming Mirror feature can automatically adjust its position to reduce headlight glare from vehicles behind you.', 'R2: This feature can be turned on or off through the Uconnect Controls button on the touchscreen.', "R3: However, it is important to note that this feature is disabled when the vehicle is in REVERSE to improve the driver's rear view."] | {'R1': 'Supported', 'R2': 'Supported', 'R3': 'Supported'} | No | false | 1 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
Can the mirrors automatically adjust their positions based on surrounding situations, e.g., headlight glare from behind?
Manual information:
Automatic Dimming Mirror — If Equipped The rearview mirror can be adjusted up, down, left, and right. The mirror should be adjusted to center on the view through the rear window. This mirror automatically adjusts for headlight glare from vehicles behind you. The Automatic Dimming feature can be turned on or off through the Uconnect Controls button on the touchscreen. Note: The Automatic Dimming Mirror feature is disabled when the vehicle is in REVERSE to improve the driver’s rear view. CAUTION: To avoid damage to the mirror during cleaning, never spray any cleaning solution directly onto the mirror. Apply the solution onto a clean cloth and wipe the mirror clean.
Answer to user's question:
|
dev_71 | Ensemble Retriever (Base) | Can the mirrors automatically adjust their positions based on surrounding situations, e.g., headlight glare from behind? | Manual Mirror — If Equipped The rearview mirror can be adjusted up, down, left, and right. The mirror should be adjusted to center on the view through the rear window. Headlight glare from vehicles behind you can be reduced by moving the small control under the mirror to the night position (toward the rear of the vehicle). The mirror should be adjusted while set in the day position (toward the windshield). | No, based on the given context, the mirrors cannot automatically adjust their positions based on surrounding situations such as headlight glare from behind. The manual mirror can be adjusted by the driver using the small control under the mirror to the night position to reduce headlight glare from vehicles behind. | ['R1: No, based on the given context, the mirrors cannot automatically adjust their positions based on surrounding situations such as headlight glare from behind.', 'R2: The manual mirror can be adjusted by the driver using the small control under the mirror to the night position to reduce headlight glare from vehicles behind.'] | {'R1': 'Supported', 'R2': 'Supported'} | No | false | 1 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
Can the mirrors automatically adjust their positions based on surrounding situations, e.g., headlight glare from behind?
Manual information:
Manual Mirror — If Equipped The rearview mirror can be adjusted up, down, left, and right. The mirror should be adjusted to center on the view through the rear window. Headlight glare from vehicles behind you can be reduced by moving the small control under the mirror to the night position (toward the rear of the vehicle). The mirror should be adjusted while set in the day position (toward the windshield).
Answer to user's question:
|
dev_72 | Adaptive Ensemble Search | Can the mirrors automatically adjust their positions based on surrounding situations, e.g., headlight glare from behind? | This mirror automatically adjusts for headlight glare from vehicles behind you. Headlight glare from vehicles behind you can be reduced by moving the small control under the mirror to the night position (toward the rear of the vehicle). The mirror should be adjusted while set in the day position (toward the windshield). The automatic high beam headlamp control can be turned on or off by selecting “on” under “auto dim high beams” within your uconnect settings "⇨uconnect settings" , as well as turning the headlight switch to the auto position and placing the multifunction lever in the high beam position. Broken, muddy, or obstructed headlights and taillights of vehicles in the field of view will cause headlights to remain on longer (closer to the vehicle). Also, dirt, film, and other obstructions on the windshield or camera lens will cause the system to function improperly. | Yes, the mirrors can automatically adjust their positions based on surrounding situations such as headlight glare from behind. The mirror automatically adjusts for headlight glare from vehicles behind you. Headlight glare from vehicles behind you can be reduced by moving the small control under the mirror to the night position (toward the rear of the vehicle). | ['R1: Yes, the mirrors can automatically adjust their positions based on surrounding situations such as headlight glare from behind.', 'R2: The mirror automatically adjusts for headlight glare from vehicles behind you.', 'R3: Headlight glare from vehicles behind you can be reduced by moving the small control under the mirror to the night position (toward the rear of the vehicle).'] | {'R1': 'Supported', 'R2': 'Supported', 'R3': 'Supported'} | No | false | 1 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
Can the mirrors automatically adjust their positions based on surrounding situations, e.g., headlight glare from behind?
Manual information:
This mirror automatically adjusts for headlight glare from vehicles behind you. Headlight glare from vehicles behind you can be reduced by moving the small control under the mirror to the night position (toward the rear of the vehicle). The mirror should be adjusted while set in the day position (toward the windshield). The automatic high beam headlamp control can be turned on or off by selecting “on” under “auto dim high beams” within your uconnect settings "⇨uconnect settings" , as well as turning the headlight switch to the auto position and placing the multifunction lever in the high beam position. Broken, muddy, or obstructed headlights and taillights of vehicles in the field of view will cause headlights to remain on longer (closer to the vehicle). Also, dirt, film, and other obstructions on the windshield or camera lens will cause the system to function improperly.
Answer to user's question:
|
dev_73 | Ensemble Retriever | Can the mirrors automatically adjust their positions based on surrounding situations, e.g., headlight glare from behind? | Manual Mirror — If Equipped The rearview mirror can be adjusted up, down, left, and right. The mirror should be adjusted to center on the view through the rear window. Headlight glare from vehicles behind you can be reduced by moving the small control under the mirror to the night position (toward the rear of the vehicle). The mirror should be adjusted while set in the day position (toward the windshield). Automatic Dimming Mirror — If Equipped The rearview mirror can be adjusted up, down, left, and right. The mirror should be adjusted to center on the view through the rear window. This mirror automatically adjusts for headlight glare from vehicles behind you. The Automatic Dimming feature can be turned on or off through the Uconnect Controls button on the touchscreen. Note: The Automatic Dimming Mirror feature is disabled when the vehicle is in REVERSE to improve the driver’s rear view. CAUTION: To avoid damage to the mirror during cleaning, never spray any cleaning solution directly onto the mirror. Apply the solution onto a clean cloth and wipe the mirror clean. Automatic High Beam Headlamp Control — If Equipped The Automatic High Beam Headlamp Control system provides increased forward lighting at night by automatically controlling the high beams through the use of a camera mounted on the vehicle’s header. This camera detects vehicle specific light and automatically switches from high beams to low beams until the approaching vehicle is out of view. Note: the automatic high beam headlamp control can be turned on or off by selecting “on” under “auto dim high beams” within your uconnect settings "⇨uconnect settings" , as well as turning the headlight switch to the auto position and placing the multifunction lever in the high beam position. Broken, muddy, or obstructed headlights and taillights of vehicles in the field of view will cause headlights to remain on longer (closer to the vehicle). Also, dirt, film, and other obstructions on the windshield or camera lens will cause the system to function improperly. | Yes, the Automatic Dimming Mirror feature can automatically adjust its position to reduce headlight glare from vehicles behind you. This feature can be turned on or off through the Uconnect Controls button on the touchscreen. | ['R1: Yes, the Automatic Dimming Mirror feature can automatically adjust its position to reduce headlight glare from vehicles behind you.', 'R2: This feature can be turned on or off through the Uconnect Controls button on the touchscreen.'] | {'R1': 'Supported', 'R2': 'Supported'} | No | false | 1 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
Can the mirrors automatically adjust their positions based on surrounding situations, e.g., headlight glare from behind?
Manual information:
Manual Mirror — If Equipped The rearview mirror can be adjusted up, down, left, and right. The mirror should be adjusted to center on the view through the rear window. Headlight glare from vehicles behind you can be reduced by moving the small control under the mirror to the night position (toward the rear of the vehicle). The mirror should be adjusted while set in the day position (toward the windshield). Automatic Dimming Mirror — If Equipped The rearview mirror can be adjusted up, down, left, and right. The mirror should be adjusted to center on the view through the rear window. This mirror automatically adjusts for headlight glare from vehicles behind you. The Automatic Dimming feature can be turned on or off through the Uconnect Controls button on the touchscreen. Note: The Automatic Dimming Mirror feature is disabled when the vehicle is in REVERSE to improve the driver’s rear view. CAUTION: To avoid damage to the mirror during cleaning, never spray any cleaning solution directly onto the mirror. Apply the solution onto a clean cloth and wipe the mirror clean. Automatic High Beam Headlamp Control — If Equipped The Automatic High Beam Headlamp Control system provides increased forward lighting at night by automatically controlling the high beams through the use of a camera mounted on the vehicle’s header. This camera detects vehicle specific light and automatically switches from high beams to low beams until the approaching vehicle is out of view. Note: the automatic high beam headlamp control can be turned on or off by selecting “on” under “auto dim high beams” within your uconnect settings "⇨uconnect settings" , as well as turning the headlight switch to the auto position and placing the multifunction lever in the high beam position. Broken, muddy, or obstructed headlights and taillights of vehicles in the field of view will cause headlights to remain on longer (closer to the vehicle). Also, dirt, film, and other obstructions on the windshield or camera lens will cause the system to function improperly.
Answer to user's question:
|
dev_74 | Ensemble Retriever (Base) | I am driving but the Vehicle Security Light turns on. What does it mean and what should I do now? | Brake System Warning Light The red Brake System Warning Light will turn on when the ignition is placed in the ON/RUN mode, and may stay on for as long as four seconds. If the Brake System Warning Light remains on or comes on while driving, it indicates that the brake system is not functioning properly and that immediate service is required. If the Brake System Warning Light does not come on when the ignition is placed in the ON/RUN mode, have the light repaired as soon as possible. | If the Vehicle Security Light turns on while you are driving, it may indicate a problem with the vehicle's security system. You should refer to your vehicle's owner's manual for specific information on what the light means and what actions you should take. It is recommended that you have the vehicle inspected by a qualified mechanic as soon as possible to diagnose and address any issues with the security system. | ["R1: If the Vehicle Security Light turns on while you are driving, it may indicate a problem with the vehicle's security system.", "R2: You should refer to your vehicle's owner's manual for specific information on what the light means and what actions you should take.", 'R3: It is recommended that you have the vehicle inspected by a qualified mechanic as soon as possible to diagnose and address any issues with the security system.'] | {'R1': 'Neither', 'R2': 'Neither', 'R3': 'Neither'} | Yes | false | 0 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
I am driving but the Vehicle Security Light turns on. What does it mean and what should I do now?
Manual information:
Brake System Warning Light The red Brake System Warning Light will turn on when the ignition is placed in the ON/RUN mode, and may stay on for as long as four seconds. If the Brake System Warning Light remains on or comes on while driving, it indicates that the brake system is not functioning properly and that immediate service is required. If the Brake System Warning Light does not come on when the ignition is placed in the ON/RUN mode, have the light repaired as soon as possible.
Answer to user's question:
|
dev_75 | Ensemble Retriever | I am driving but the Vehicle Security Light turns on. What does it mean and what should I do now? | Brake System Warning Light The red Brake System Warning Light will turn on when the ignition is placed in the ON/RUN mode, and may stay on for as long as four seconds. If the Brake System Warning Light remains on or comes on while driving, it indicates that the brake system is not functioning properly and that immediate service is required. If the Brake System Warning Light does not come on when the ignition is placed in the ON/RUN mode, have the light repaired as soon as possible. Seat Belt Reminder Warning Light This warning light indicates when the driver or passenger seat belt is unbuckled. When the ignition is first placed in the ON/RUN or ACC/ON/RUN position and if the driver’s seat belt is unbuckled, a chime will sound and the light will turn on. When driving, if the driver or front passenger seat belt remains unbuckled, the Seat Belt Reminder Light will flash or remain on continuously and a chime will sound Service 4WD Warning Light — If Equipped This warning light will illuminate to signal a fault with the 4WD system. If the light stays on or comes on during driving, it means that the 4WD system is not functioning properly and that service is required. It is recommend you drive to the nearest service center and have the vehicle serviced immediately. | If the Vehicle Security Light turns on while you are driving, it means that there is a problem with the vehicle's security system. You should take your vehicle to a service center as soon as possible to have it inspected and repaired. It is important to address any issues with the security system to ensure the safety and security of your vehicle. | ["R1: If the Vehicle Security Light turns on while you are driving, it means that there is a problem with the vehicle's security system.", 'R2: You should take your vehicle to a service center as soon as possible to have it inspected and repaired.', 'R3: It is important to address any issues with the security system to ensure the safety and security of your vehicle.'] | {'R1': 'Supported', 'R2': 'Supported', 'R3': 'Neither'} | Yes | false | 0 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
I am driving but the Vehicle Security Light turns on. What does it mean and what should I do now?
Manual information:
Brake System Warning Light The red Brake System Warning Light will turn on when the ignition is placed in the ON/RUN mode, and may stay on for as long as four seconds. If the Brake System Warning Light remains on or comes on while driving, it indicates that the brake system is not functioning properly and that immediate service is required. If the Brake System Warning Light does not come on when the ignition is placed in the ON/RUN mode, have the light repaired as soon as possible. Seat Belt Reminder Warning Light This warning light indicates when the driver or passenger seat belt is unbuckled. When the ignition is first placed in the ON/RUN or ACC/ON/RUN position and if the driver’s seat belt is unbuckled, a chime will sound and the light will turn on. When driving, if the driver or front passenger seat belt remains unbuckled, the Seat Belt Reminder Light will flash or remain on continuously and a chime will sound Service 4WD Warning Light — If Equipped This warning light will illuminate to signal a fault with the 4WD system. If the light stays on or comes on during driving, it means that the 4WD system is not functioning properly and that service is required. It is recommend you drive to the nearest service center and have the vehicle serviced immediately.
Answer to user's question:
|
dev_76 | Adaptive Ensemble Search | How can I disable the window controls for the rear passenger doors? | Window Lockout Switch The window lockout switch allows you to disable the window controls on the rear passenger doors. To disable the window controls, rotate the switch downward. To enable the window controls, rotate the switch upward. | To disable the window controls for the rear passenger doors, you need to use the window lockout switch. Here are the steps to follow: 1. Locate the window lockout switch on the driver's side door panel. 2. Rotate the switch downward to disable the window controls on the rear passenger doors. 3. Test the window controls on the rear passenger doors to confirm that they are disabled. To enable the window controls again, simply rotate the switch upward. | ['R1: To disable the window controls for the rear passenger doors, you need to use the window lockout switch.', 'R2: Here are the steps to follow: 1.', "R3: Locate the window lockout switch on the driver's side door panel.", 'R4: 2. Rotate the switch downward to disable the window controls on the rear passenger doors.', 'R5: 3. Test the window controls on the rear passenger doors to confirm that they are disabled.', 'R6: To enable the window controls again, simply rotate the switch upward.'] | {'R1': 'Supported', 'R2': 'Neither', 'R3': 'Neither', 'R4': 'Supported', 'R5': 'Neither', 'R6': 'Supported'} | Yes | false | 0 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
How can I disable the window controls for the rear passenger doors?
Manual information:
Window Lockout Switch The window lockout switch allows you to disable the window controls on the rear passenger doors. To disable the window controls, rotate the switch downward. To enable the window controls, rotate the switch upward.
Answer to user's question:
|
dev_77 | Ensemble Retriever (Base) | How can I disable the window controls for the rear passenger doors? | Window Lockout Switch The window lockout switch allows you to disable the window controls on the rear passenger doors. To disable the window controls, rotate the switch downward. To enable the window controls, rotate the switch upward. | To disable the window controls for the rear passenger doors, you need to rotate the window lockout switch downward. | ['R1: To disable the window controls for the rear passenger doors, you need to rotate the window lockout switch downward.'] | {'R1': 'Supported'} | No | false | 1 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
How can I disable the window controls for the rear passenger doors?
Manual information:
Window Lockout Switch The window lockout switch allows you to disable the window controls on the rear passenger doors. To disable the window controls, rotate the switch downward. To enable the window controls, rotate the switch upward.
Answer to user's question:
|
dev_78 | Adaptive Ensemble Search | how can I whether the Onboard Diagnostic system is ready for the emissions inspection? | Your vehicle is equipped with a sophisticated Onboard Diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and transmission control systems. When these systems are operating properly, your vehicle will provide excellent performance and fuel economy, as well as engine emissions well within current government regulations. Cycle the ignition switch to the ON position, but do not crank or start the engine. If you crank or start the engine, you will have to start this test over. As soon as you cycle the ignition switch to the ON position, you will see the Malfunction Indicator Light (MIL) symbol come on as part of a normal bulb check. Approximately 15 seconds later, one of two things will happen: The MIL will flash for about 10 seconds and then return to being fully illuminated until you turn OFF the ignition or start the engine. This means that your vehicle's obd ii system is not ready and you should not proceed to the i/m station. The MIL will not flash at all and will remain fully illuminated until you place the ignition in the off position or start the engine. This means that your vehicle's obd ii system is ready and you can proceed to the i/m station. In some localities, it may be a legal requirement to pass an inspection of your vehicle's emissions control system. Failure to pass could prevent vehicle registration. | To check whether the Onboard Diagnostic system is ready for the emissions inspection, you need to cycle the ignition switch to the ON position, but do not crank or start the engine. As soon as you cycle the ignition switch to the ON position, you will see the Malfunction Indicator Light (MIL) symbol come on as part of a normal bulb check. Approximately 15 seconds later, one of two things will happen: 1. The MIL will flash for about 10 seconds and then return to being fully illuminated until you turn OFF the ignition or start the engine. This means that your vehicle's OBD II system is not ready and you should not proceed to the I/M station. 2. The MIL will not flash at all and will remain fully illuminated until you place the ignition in the off position or start the engine. This means that your vehicle's OBD II system is ready and you can proceed to the I/M station. If the MIL is not flashing and remains fully illuminated, then your vehicle's OBD II system is ready for the emissions inspection. | ['R1: To check whether the Onboard Diagnostic system is ready for the emissions inspection, you need to cycle the ignition switch to the ON position, but do not crank or start the engine.', 'R2: As soon as you cycle the ignition switch to the ON position, you will see the Malfunction Indicator Light (MIL) symbol come on as part of a normal bulb check.', 'R3: Approximately 15 seconds later, one of two things will happen: 1.', 'R4: The MIL will flash for about 10 seconds and then return to being fully illuminated until you turn OFF the ignition or start the engine.', "R5: This means that your vehicle's OBD II system is not ready and you should not proceed to the I/M station.", 'R6: 2. The MIL will not flash at all and will remain fully illuminated until you place the ignition in the off position or start the engine.', "R7: This means that your vehicle's OBD II system is ready and you can proceed to the I/M station.", "R8: If the MIL is not flashing and remains fully illuminated, then your vehicle's OBD II system is ready for the emissions inspection."] | {'R1': 'Supported', 'R2': 'Supported', 'R3': 'Neither', 'R4': 'Supported', 'R5': 'Supported', 'R6': 'Neither', 'R7': 'Supported', 'R8': 'Supported'} | No | false | 1 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
how can I whether the Onboard Diagnostic system is ready for the emissions inspection?
Manual information:
Your vehicle is equipped with a sophisticated Onboard Diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and transmission control systems. When these systems are operating properly, your vehicle will provide excellent performance and fuel economy, as well as engine emissions well within current government regulations. Cycle the ignition switch to the ON position, but do not crank or start the engine. If you crank or start the engine, you will have to start this test over. As soon as you cycle the ignition switch to the ON position, you will see the Malfunction Indicator Light (MIL) symbol come on as part of a normal bulb check. Approximately 15 seconds later, one of two things will happen: The MIL will flash for about 10 seconds and then return to being fully illuminated until you turn OFF the ignition or start the engine. This means that your vehicle's obd ii system is not ready and you should not proceed to the i/m station. The MIL will not flash at all and will remain fully illuminated until you place the ignition in the off position or start the engine. This means that your vehicle's obd ii system is ready and you can proceed to the i/m station. In some localities, it may be a legal requirement to pass an inspection of your vehicle's emissions control system. Failure to pass could prevent vehicle registration.
Answer to user's question:
|
dev_79 | Ensemble Retriever (Base) | What information do the Off-Road Pages provide? | OFF-ROAD PAGES — IF EQUIPPED If your vehicle is equipped with Off-Road Pages, it will provide you vehicle status while operating on off-road conditions. It supplies information relating to the vehicle ride height, the status of the transfer case, the pitch and roll of the vehicle. To access Off-Road Pages, press the Apps button on the touchscreen, and then select Off-Road Pages. | The Off-Road Pages provide information relating to the vehicle ride height, the status of the transfer case, and the pitch and roll of the vehicle while operating on off-road conditions. | ['R1: The Off-Road Pages provide information relating to the vehicle ride height, the status of the transfer case, and the pitch and roll of the vehicle while operating on off-road conditions.'] | {'R1': 'Supported'} | No | false | 1 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
What information do the Off-Road Pages provide?
Manual information:
OFF-ROAD PAGES — IF EQUIPPED If your vehicle is equipped with Off-Road Pages, it will provide you vehicle status while operating on off-road conditions. It supplies information relating to the vehicle ride height, the status of the transfer case, the pitch and roll of the vehicle. To access Off-Road Pages, press the Apps button on the touchscreen, and then select Off-Road Pages.
Answer to user's question:
|
dev_80 | Adaptive Ensemble Search | What information do the Off-Road Pages provide? | OFF-ROAD PAGES — IF EQUIPPED If your vehicle is equipped with Off-Road Pages, it will provide you vehicle status while operating on off-road conditions. It supplies information relating to the vehicle ride height, the status of the transfer case, the pitch and roll of the vehicle. To access Off-Road Pages, press the Apps button on the touchscreen, and then select Off-Road Pages. | The Off-Road Pages provide information related to the vehicle's status while operating on off-road conditions. This includes the vehicle's ride height, the status of the transfer case, and the pitch and roll of the vehicle. | ["R1: The Off-Road Pages provide information related to the vehicle's status while operating on off-road conditions.", "R2: This includes the vehicle's ride height, the status of the transfer case, and the pitch and roll of the vehicle."] | {'R1': 'Supported', 'R2': 'Supported'} | No | false | 1 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
What information do the Off-Road Pages provide?
Manual information:
OFF-ROAD PAGES — IF EQUIPPED If your vehicle is equipped with Off-Road Pages, it will provide you vehicle status while operating on off-road conditions. It supplies information relating to the vehicle ride height, the status of the transfer case, the pitch and roll of the vehicle. To access Off-Road Pages, press the Apps button on the touchscreen, and then select Off-Road Pages.
Answer to user's question:
|
dev_81 | Ensemble Retriever | What information do the Off-Road Pages provide? | OFF-ROAD PAGES — IF EQUIPPED If your vehicle is equipped with Off-Road Pages, it will provide you vehicle status while operating on off-road conditions. It supplies information relating to the vehicle ride height, the status of the transfer case, the pitch and roll of the vehicle. To access Off-Road Pages, press the Apps button on the touchscreen, and then select Off-Road Pages. Off-Road Pages Status Bar The Off-Road Pages Status Bar is located along the bottom of Off-Road Pages and is present in each of the selectable page options. It provides information for the following items: transfer case status latitude/longitude altitude of the vehicle status of selec-speed control and selected speed in mph (km/h). | The Off-Road Pages provide information relating to the vehicle ride height, the status of the transfer case, the pitch and roll of the vehicle, transfer case status, latitude/longitude, altitude of the vehicle, and the status of Selec-Speed Control and Selected Speed in mph (km/h). | ['R1: The Off-Road Pages provide information relating to the vehicle ride height, the status of the transfer case, the pitch and roll of the vehicle, transfer case status, latitude/longitude, altitude of the vehicle, and the status of Selec-Speed Control and Selected Speed in mph (km/h).'] | {'R1': 'Supported'} | No | false | 1 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
What information do the Off-Road Pages provide?
Manual information:
OFF-ROAD PAGES — IF EQUIPPED If your vehicle is equipped with Off-Road Pages, it will provide you vehicle status while operating on off-road conditions. It supplies information relating to the vehicle ride height, the status of the transfer case, the pitch and roll of the vehicle. To access Off-Road Pages, press the Apps button on the touchscreen, and then select Off-Road Pages. Off-Road Pages Status Bar The Off-Road Pages Status Bar is located along the bottom of Off-Road Pages and is present in each of the selectable page options. It provides information for the following items: transfer case status latitude/longitude altitude of the vehicle status of selec-speed control and selected speed in mph (km/h).
Answer to user's question:
|
dev_83 | Lucene Search | In which conditions ABC will likely be activated? | Battery Saver On, Battery Saver Mode Message, And Electrical Load Reduction Actions (If Equipped) This vehicle is equipped with an Intelligent Battery Sensor (IBS) to perform additional monitoring of the electrical system and status of the vehicle battery. In cases when the IBS detects charging system failure, or the vehicle battery conditions are deteriorating, electrical load reduction actions will take place to extend the driving time and distance of the vehicle. This is done by reducing power to or turning off non-essential electrical loads. Load reduction is only active when the engine is running. It will display a message if there is a risk of battery depletion to the point where the vehicle may stall due to lack of electrical supply, or will not restart after the current drive cycle. When load reduction is activated, the message “Battery Saver On Some Systems May Have Reduced Power” will appear in the instrument cluster. These messages indicate the vehicle battery has a low state of charge and continues to lose electrical charge at a rate that the charging system cannot sustain. The electrical loads that may be switched off (if equipped), and vehicle functions which can be affected by load reduction: heated seat/vented seats/heated wheel rear defroster and heated mirrors hvac system 115 volt ac power inverter system audio and telematics system loss of battery charge may indicate one or more of the following conditions: the charging system cannot deliver enough electrical power to the vehicle system because the electrical loads are larger than the capability of the charging system. The charging system is still functioning properly. Turning on all possible vehicle electrical loads (e.g. HVAC to max settings, exterior and interior lights, overloaded power outlets +12 Volt, 115 Volt AC, USB ports) during certain driving conditions (city driving, towing, frequent stopping). Installing options like additional lights, upfitter electrical accessories, audio systems, alarms and similar devices. Unusual driving cycles (short trips separated by long parking periods). The vehicle was parked for an extended period of time (weeks, months). The battery was recently replaced and was not charged completely. The battery was discharged by an electrical load left on when the vehicle was parked. The battery was used for an extended period with the engine not running to supply radio, lights, chargers, +12 Volt portable appliances like vacuum cleaners, game consoles and similar devices. Note: The charging system is independent from load reduction. The charging system performs a diagnostic on the charging system continuously. If the battery charge warning light is on it may indicate a problem with the charging system "⇨battery charge warning light" . | It is not clear what "ABC" refers to in this context. However, based on the information provided, load reduction actions will be activated when the Intelligent Battery Sensor (IBS) detects charging system failure or deteriorating battery conditions. This is done to extend the driving time and distance of the vehicle by reducing power to or turning off non-essential electrical loads. Load reduction is only active when the engine is running. The message "Battery Saver On Some Systems May Have Reduced Power" will appear in the instrument cluster if there is a risk of battery depletion to the point where the vehicle may stall due to lack of electrical supply, or will not restart after the current drive cycle. Loss of battery charge may indicate various conditions, as listed in the context. | ['R1: It is not clear what "ABC" refers to in this context.', 'R2: However, based on the information provided, load reduction actions will be activated when the Intelligent Battery Sensor (IBS) detects charging system failure or deteriorating battery conditions.', 'R3: This is done to extend the driving time and distance of the vehicle by reducing power to or turning off non-essential electrical loads.', 'R4: Load reduction is only active when the engine is running.', 'R5: The message "Battery Saver On Some Systems May Have Reduced Power" will appear in the instrument cluster if there is a risk of battery depletion to the point where the vehicle may stall due to lack of electrical supply, or will not restart after the current drive cycle.', 'R6: Loss of battery charge may indicate various conditions, as listed in the context.'] | {'R1': 'Supported', 'R2': 'Supported', 'R3': 'Neither', 'R4': 'Neither', 'R5': 'Neither', 'R6': 'Supported'} | No | false | 1 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
In which conditions ABC will likely be activated?
Manual information:
Battery Saver On, Battery Saver Mode Message, And Electrical Load Reduction Actions (If Equipped) This vehicle is equipped with an Intelligent Battery Sensor (IBS) to perform additional monitoring of the electrical system and status of the vehicle battery. In cases when the IBS detects charging system failure, or the vehicle battery conditions are deteriorating, electrical load reduction actions will take place to extend the driving time and distance of the vehicle. This is done by reducing power to or turning off non-essential electrical loads. Load reduction is only active when the engine is running. It will display a message if there is a risk of battery depletion to the point where the vehicle may stall due to lack of electrical supply, or will not restart after the current drive cycle. When load reduction is activated, the message “Battery Saver On Some Systems May Have Reduced Power” will appear in the instrument cluster. These messages indicate the vehicle battery has a low state of charge and continues to lose electrical charge at a rate that the charging system cannot sustain. The electrical loads that may be switched off (if equipped), and vehicle functions which can be affected by load reduction: heated seat/vented seats/heated wheel rear defroster and heated mirrors hvac system 115 volt ac power inverter system audio and telematics system loss of battery charge may indicate one or more of the following conditions: the charging system cannot deliver enough electrical power to the vehicle system because the electrical loads are larger than the capability of the charging system. The charging system is still functioning properly. Turning on all possible vehicle electrical loads (e.g. HVAC to max settings, exterior and interior lights, overloaded power outlets +12 Volt, 115 Volt AC, USB ports) during certain driving conditions (city driving, towing, frequent stopping). Installing options like additional lights, upfitter electrical accessories, audio systems, alarms and similar devices. Unusual driving cycles (short trips separated by long parking periods). The vehicle was parked for an extended period of time (weeks, months). The battery was recently replaced and was not charged completely. The battery was discharged by an electrical load left on when the vehicle was parked. The battery was used for an extended period with the engine not running to supply radio, lights, chargers, +12 Volt portable appliances like vacuum cleaners, game consoles and similar devices. Note: The charging system is independent from load reduction. The charging system performs a diagnostic on the charging system continuously. If the battery charge warning light is on it may indicate a problem with the charging system "⇨battery charge warning light" .
Answer to user's question:
|
dev_84 | Ensemble Retriever (Base) | how to select the menus on the display screen? | Ok button push the ok button to access/select the information screens or submenu screens of a main menu item. To reset displayed/selected features push and hold the ok button for two seconds. | To select the information screens or submenu screens of a main menu item on the display screen, you need to push the OK button. | ['R1: To select the information screens or submenu screens of a main menu item on the display screen, you need to push the OK button.'] | {'R1': 'Supported'} | No | false | 1 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
how to select the menus on the display screen?
Manual information:
Ok button push the ok button to access/select the information screens or submenu screens of a main menu item. To reset displayed/selected features push and hold the ok button for two seconds.
Answer to user's question:
|
dev_85 | Lucene Search | how to select the menus on the display screen? | Instrument Cluster Display Location And Controls The Instrument Cluster Display is located in the center of the instrument cluster. The display contains different areas of vehicle information. The top line where Reconfigurable Telltales, Compass Direction, Outside Temperature, Time, Range, Audio Info, MPG or Trip are displayed. This also displays the Speedometer which is an option for the upper center reconfigurable, but is not the default. Default setting is Menu Title. The main display area where the menus and pop-up messages are displayed. The lower line where telltales, menu name and menu page are displayed. The system allows the driver to select information by pushing the following buttons mounted on the steering wheel: up and down arrow buttons: using the up or down arrow button allow you to cycle through the main menu items. They allow you to change the Main Screen area and Menu Title area. Left and right arrow buttons: using the left or right arrow button allow you to cycle through the submenu screens of the main menu item. | To select menus on the display screen, you can use the up and down arrow buttons on the steering wheel to cycle through the main menu items and change the main screen area and menu title area. You can also use the left and right arrow buttons to cycle through the submenu screens of the main menu item. | ['R1: To select menus on the display screen, you can use the up and down arrow buttons on the steering wheel to cycle through the main menu items and change the main screen area and menu title area.', 'R2: You can also use the left and right arrow buttons to cycle through the submenu screens of the main menu item.'] | {'R1': 'Supported', 'R2': 'Supported'} | No | false | 1 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
how to select the menus on the display screen?
Manual information:
Instrument Cluster Display Location And Controls The Instrument Cluster Display is located in the center of the instrument cluster. The display contains different areas of vehicle information. The top line where Reconfigurable Telltales, Compass Direction, Outside Temperature, Time, Range, Audio Info, MPG or Trip are displayed. This also displays the Speedometer which is an option for the upper center reconfigurable, but is not the default. Default setting is Menu Title. The main display area where the menus and pop-up messages are displayed. The lower line where telltales, menu name and menu page are displayed. The system allows the driver to select information by pushing the following buttons mounted on the steering wheel: up and down arrow buttons: using the up or down arrow button allow you to cycle through the main menu items. They allow you to change the Main Screen area and Menu Title area. Left and right arrow buttons: using the left or right arrow button allow you to cycle through the submenu screens of the main menu item.
Answer to user's question:
|
dev_86 | Ensemble Retriever (Base) | how to jump start? | JUMP STARTING If your vehicle has a discharged battery, it can be jump started using a set of jumper cables and a battery in another vehicle, or by using a portable battery booster pack. Jump starting can be dangerous if done improperly, so please follow the procedures in this section carefully. WARNING: Do not attempt jump starting if the battery is frozen. It could rupture or explode and cause personal injury. CAUTION: Do not use a portable battery booster pack or any other booster source with a system voltage greater than 12 Volts or damage to the battery, starter motor, alternator or electrical system may occur. Note: When using a portable battery booster pack, follow the manufacturer's operating instructions and precautions. | To jump start a vehicle with a discharged battery, you can use a set of jumper cables and a battery in another vehicle, or by using a portable battery booster pack. However, it is important to follow the procedures carefully to avoid any danger. Also, do not attempt jump starting if the battery is frozen, and do not use a portable battery booster pack or any other booster source with a system voltage greater than 12 Volts to avoid damage to the battery, starter motor, alternator or electrical system. When using a portable battery booster pack, follow the manufacturer's operating instructions and precautions. | ['R1: To jump start a vehicle with a discharged battery, you can use a set of jumper cables and a battery in another vehicle, or by using a portable battery booster pack.', 'R2: However, it is important to follow the procedures carefully to avoid any danger.', 'R3: Also, do not attempt jump starting if the battery is frozen, and do not use a portable battery booster pack or any other booster source with a system voltage greater than 12 Volts to avoid damage to the battery, starter motor, alternator or electrical system.', "R4: When using a portable battery booster pack, follow the manufacturer's operating instructions and precautions."] | {'R1': 'Supported', 'R2': 'Neither', 'R3': 'Supported', 'R4': 'Neither'} | No | false | 1 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
how to jump start?
Manual information:
JUMP STARTING If your vehicle has a discharged battery, it can be jump started using a set of jumper cables and a battery in another vehicle, or by using a portable battery booster pack. Jump starting can be dangerous if done improperly, so please follow the procedures in this section carefully. WARNING: Do not attempt jump starting if the battery is frozen. It could rupture or explode and cause personal injury. CAUTION: Do not use a portable battery booster pack or any other booster source with a system voltage greater than 12 Volts or damage to the battery, starter motor, alternator or electrical system may occur. Note: When using a portable battery booster pack, follow the manufacturer's operating instructions and precautions.
Answer to user's question:
|
dev_87 | Lucene Search | how to jump start? | JUMP STARTING If your vehicle has a discharged battery, it can be jump started using a set of jumper cables and a battery in another vehicle, or by using a portable battery booster pack. Jump starting can be dangerous if done improperly, so please follow the procedures in this section carefully. WARNING: Do not attempt jump starting if the battery is frozen. It could rupture or explode and cause personal injury. CAUTION: Do not use a portable battery booster pack or any other booster source with a system voltage greater than 12 Volts or damage to the battery, starter motor, alternator or electrical system may occur. Note: When using a portable battery booster pack, follow the manufacturer's operating instructions and precautions. | To jump start a vehicle, you will need a set of jumper cables and a battery in another vehicle or a portable battery booster pack. Here are the steps to follow: 1. Park the vehicle with the good battery close to the vehicle with the discharged battery, but do not let the vehicles touch. 2. Turn off both vehicles and make sure the keys are removed from the ignition. 3. Connect one end of the red jumper cable to the positive (+) terminal of the good battery. 4. Connect the other end of the red jumper cable to the positive (+) terminal of the discharged battery. 5. Connect one end of the black jumper cable to the negative (-) terminal of the good battery. 6. Connect the other end of the black jumper cable to an unpainted metal surface on the engine block or frame of the vehicle with the discharged battery. Do not connect it to the negative terminal of the discharged battery. 7. Start the engine of the vehicle with the good battery and let it run for a few minutes. 8. Try to start the engine of the vehicle with the discharged battery. If it does not start, wait a few more minutes and try again. 9. Once the engine of the vehicle with the discharged battery starts, remove the jumper cables in the | ['R1: To jump start a vehicle, you will need a set of jumper cables and a battery in another vehicle or a portable battery booster pack.', 'R2: Here are the steps to follow: 1.', 'R3: Park the vehicle with the good battery close to the vehicle with the discharged battery, but do not let the vehicles touch.', 'R4: 2. Turn off both vehicles and make sure the keys are removed from the ignition.', 'R5: 3. Connect one end of the red jumper cable to the positive (+) terminal of the good battery.', 'R6: 4. Connect the other end of the red jumper cable to the positive (+) terminal of the discharged battery.', 'R7: 5. Connect one end of the black jumper cable to the negative (-) terminal of the good battery.', 'R8: 6. Connect the other end of the black jumper cable to an unpainted metal surface on the engine block or frame of the vehicle with the discharged battery.', 'R9: Do not connect it to the negative terminal of the discharged battery.', 'R10: 7. Start the engine of the vehicle with the good battery and let it run for a few minutes.', 'R11: 8. Try to start the engine of the vehicle with the discharged battery.', 'R12: If it does not start, wait a few more minutes and try again.', 'R13: 9. Once the engine of the vehicle with the discharged battery starts, remove the jumper cables in the'] | {'R1': 'Supported', 'R2': 'Neither', 'R3': 'Neither', 'R4': 'Neither', 'R5': 'Neither', 'R6': 'Neither', 'R7': 'Neither', 'R8': 'Neither', 'R9': 'Neither', 'R10': 'Neither', 'R11': 'Neither', 'R12': 'Neither', 'R13': 'Neither'} | Yes | false | 0 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
how to jump start?
Manual information:
JUMP STARTING If your vehicle has a discharged battery, it can be jump started using a set of jumper cables and a battery in another vehicle, or by using a portable battery booster pack. Jump starting can be dangerous if done improperly, so please follow the procedures in this section carefully. WARNING: Do not attempt jump starting if the battery is frozen. It could rupture or explode and cause personal injury. CAUTION: Do not use a portable battery booster pack or any other booster source with a system voltage greater than 12 Volts or damage to the battery, starter motor, alternator or electrical system may occur. Note: When using a portable battery booster pack, follow the manufacturer's operating instructions and precautions.
Answer to user's question:
|
dev_88 | Ensemble Retriever | how to jump start? | JUMP STARTING If your vehicle has a discharged battery, it can be jump started using a set of jumper cables and a battery in another vehicle, or by using a portable battery booster pack. Jump starting can be dangerous if done improperly, so please follow the procedures in this section carefully. WARNING: Do not attempt jump starting if the battery is frozen. It could rupture or explode and cause personal injury. CAUTION: Do not use a portable battery booster pack or any other booster source with a system voltage greater than 12 Volts or damage to the battery, starter motor, alternator or electrical system may occur. Note: When using a portable battery booster pack, follow the manufacturer's operating instructions and precautions. Preparations For Jump Start The battery in your vehicle is located in the right rear of the engine compartment. If your vehicle is equipped with a Stop/Start system, it will be equipped with two batteries See the following steps to prepare for jump starting: Apply the parking brake, shift the automatic transmission into PARK (P) (manual transmission in NEUTRAL) and place the ignition in OFF mode. Turn off the heater, radio, and all electrical accessories. If using another vehicle to jump start the battery, park the vehicle within the jumper cable’s reach, apply the parking brake and make sure the ignition is OFF. WARNING: Only use the positive battery post on the main battery to jump start your vehicle. Serious injury or death could result if you attempt to jump start using the supplemental battery. Battery gas is flammable and explosive. Keep flame or sparks away from the battery. Do not use a booster battery or any other booster source with an output greater than 12 Volts. Do not allow cable clamps to touch each other. Battery posts, terminals, and related accessories contain lead and lead compounds. Wash hands after handling. If a “fast charger” is used while the battery is in the vehicle, disconnect both vehicle battery cables before connecting the charger to the battery. Do not use a “fast charger” to provide starting. Note: the positive (+) battery post is covered with a protective cap. Lift up on the cap to gain access to the post. WARNING: Do not allow vehicles to touch each other as this could establish a ground connection and personal injury could result. Take care to avoid the radiator cooling fan whenever the hood is raised. It can start anytime the ignition switch is ON. You can be injured by moving fan blades. Remove any metal jewelry such as rings, watch bands and bracelets that could make an inadvertent electrical contact. You could be seriously injured. Batteries contain sulfuric acid that can burn your skin or eyes and generate hydrogen gas which is flammable and explosive. Keep open flames or sparks away from the battery. Jump Starting Procedure WARNING: Failure to follow this jump starting procedure could result in personal injury or property damage due to battery explosion. CAUTION: Failure to follow these procedures could result in damage to the charging system of the booster vehicle or the discharged vehicle. Note: Make sure at all times that unused ends of jumper cables are not contacting each other or either vehicle while making connections. | To jump start a vehicle, you will need a set of jumper cables and a battery in another vehicle or a portable battery booster pack. Before jump starting, make sure the battery is not frozen and do not use a booster source with an output greater than 12 Volts. Follow the preparations for jump start steps, which include applying the parking brake, turning off all electrical accessories, and making sure the ignition is off. Then, connect the positive cable to the positive battery post on the main battery and the negative cable to a metal part of the engine block or other suitable grounding point. Start the booster vehicle or turn on the portable battery booster pack and let it run for a few minutes before attempting to start the vehicle with the discharged battery. Once the vehicle starts, remove the jumper cables in the reverse order of connection. | ['R1: To jump start a vehicle, you will need a set of jumper cables and a battery in another vehicle or a portable battery booster pack.', 'R2: Before jump starting, make sure the battery is not frozen and do not use a booster source with an output greater than 12 Volts.', 'R3: Follow the preparations for jump start steps, which include applying the parking brake, turning off all electrical accessories, and making sure the ignition is off.', 'R4: Then, connect the positive cable to the positive battery post on the main battery and the negative cable to a metal part of the engine block or other suitable grounding point.', 'R5: Start the booster vehicle or turn on the portable battery booster pack and let it run for a few minutes before attempting to start the vehicle with the discharged battery.', 'R6: Once the vehicle starts, remove the jumper cables in the reverse order of connection.'] | {'R1': 'Supported', 'R2': 'Supported', 'R3': 'Supported', 'R4': 'Supported', 'R5': 'Neither', 'R6': 'Neither'} | Yes | false | 0 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
how to jump start?
Manual information:
JUMP STARTING If your vehicle has a discharged battery, it can be jump started using a set of jumper cables and a battery in another vehicle, or by using a portable battery booster pack. Jump starting can be dangerous if done improperly, so please follow the procedures in this section carefully. WARNING: Do not attempt jump starting if the battery is frozen. It could rupture or explode and cause personal injury. CAUTION: Do not use a portable battery booster pack or any other booster source with a system voltage greater than 12 Volts or damage to the battery, starter motor, alternator or electrical system may occur. Note: When using a portable battery booster pack, follow the manufacturer's operating instructions and precautions. Preparations For Jump Start The battery in your vehicle is located in the right rear of the engine compartment. If your vehicle is equipped with a Stop/Start system, it will be equipped with two batteries See the following steps to prepare for jump starting: Apply the parking brake, shift the automatic transmission into PARK (P) (manual transmission in NEUTRAL) and place the ignition in OFF mode. Turn off the heater, radio, and all electrical accessories. If using another vehicle to jump start the battery, park the vehicle within the jumper cable’s reach, apply the parking brake and make sure the ignition is OFF. WARNING: Only use the positive battery post on the main battery to jump start your vehicle. Serious injury or death could result if you attempt to jump start using the supplemental battery. Battery gas is flammable and explosive. Keep flame or sparks away from the battery. Do not use a booster battery or any other booster source with an output greater than 12 Volts. Do not allow cable clamps to touch each other. Battery posts, terminals, and related accessories contain lead and lead compounds. Wash hands after handling. If a “fast charger” is used while the battery is in the vehicle, disconnect both vehicle battery cables before connecting the charger to the battery. Do not use a “fast charger” to provide starting. Note: the positive (+) battery post is covered with a protective cap. Lift up on the cap to gain access to the post. WARNING: Do not allow vehicles to touch each other as this could establish a ground connection and personal injury could result. Take care to avoid the radiator cooling fan whenever the hood is raised. It can start anytime the ignition switch is ON. You can be injured by moving fan blades. Remove any metal jewelry such as rings, watch bands and bracelets that could make an inadvertent electrical contact. You could be seriously injured. Batteries contain sulfuric acid that can burn your skin or eyes and generate hydrogen gas which is flammable and explosive. Keep open flames or sparks away from the battery. Jump Starting Procedure WARNING: Failure to follow this jump starting procedure could result in personal injury or property damage due to battery explosion. CAUTION: Failure to follow these procedures could result in damage to the charging system of the booster vehicle or the discharged vehicle. Note: Make sure at all times that unused ends of jumper cables are not contacting each other or either vehicle while making connections.
Answer to user's question:
|
dev_90 | Lucene Search | Can each reading light be turned on/off individually? | Interior Courtesy Lights The Interior Courtesy Lights will turn on when the front doors are opened, by rotating the instrument panel dimmer control (dial on the right) on the headlight switch fully upward while the doors are closed, or if equipped, when the unlock button is pushed on the key fob. The Interior Courtesy Lights are located in the center of the vehicle’s sport bar, and consist of one large center light and four smaller reading lights. Each reading light can be turned on by pushing the lens. Pushing the lens a second time will turn the light off. When a door is open and the interior lights are on, rotating the instrument panel dimmer control to the extreme bottom position will cause all the interior lights to turn off. This allows the doors to stay open for extended periods of time without discharging the vehicle’s battery. | Yes, each reading light can be turned on and off individually by pushing the lens. Pushing the lens a second time will turn the light off. | ['R1: Yes, each reading light can be turned on and off individually by pushing the lens.', 'R2: Pushing the lens a second time will turn the light off.'] | {'R1': 'Supported', 'R2': 'Supported'} | No | false | 1 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
Can each reading light be turned on/off individually?
Manual information:
Interior Courtesy Lights The Interior Courtesy Lights will turn on when the front doors are opened, by rotating the instrument panel dimmer control (dial on the right) on the headlight switch fully upward while the doors are closed, or if equipped, when the unlock button is pushed on the key fob. The Interior Courtesy Lights are located in the center of the vehicle’s sport bar, and consist of one large center light and four smaller reading lights. Each reading light can be turned on by pushing the lens. Pushing the lens a second time will turn the light off. When a door is open and the interior lights are on, rotating the instrument panel dimmer control to the extreme bottom position will cause all the interior lights to turn off. This allows the doors to stay open for extended periods of time without discharging the vehicle’s battery.
Answer to user's question:
|
dev_92 | Adaptive Ensemble Search | Can the steering wheel warm up in winter? | The steering wheel contains a heating element that helps warm your hands in cold weather. The heated steering wheel has only one temperature setting. Once the heated steering wheel has been turned on, it will stay on until the operator turns it off. The heated steering wheel may not turn on when it is already warm. Persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury, medication, alcohol use, exhaustion, or other physical conditions must exercise care when using the steering wheel heater. It may cause burns even at low temperatures, especially if used for long periods. Do not place anything on the steering wheel that insulates against heat, such as a blanket or steering wheel covers of any type and material. This may cause the steering wheel heater to overheat. The heated steering wheel button is located on the center of the instrument panel below the radio screen, and within the Climate or Controls screen of the touchscreen. When Remote Start is activated, the front and rear defrost will automatically turn on in cold weather. The heated steering wheel and driver heated seat feature will also turn on if programmed in the Comfort menu screen within Uconnect Settings Press the heated steering wheel button once to turn the heating element on. Press the heated steering wheel button a second time to turn the heating element off. Did you know: voice command for climate may only be used to adjust the interior temperature of your vehicle. Voice Command will not work to adjust the heated seats or steering wheel if equipped. The engine must be running for the heated steering wheel to operate. | Yes, the steering wheel contains a heating element that helps warm your hands in cold weather. Once the heated steering wheel has been turned on, it will stay on until the operator turns it off. However, it may not turn on when it is already warm. | ['R1: Yes, the steering wheel contains a heating element that helps warm your hands in cold weather.', 'R2: Once the heated steering wheel has been turned on, it will stay on until the operator turns it off.', 'R3: However, it may not turn on when it is already warm.'] | {'R1': 'Supported', 'R2': 'Supported', 'R3': 'Supported'} | No | false | 1 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
Can the steering wheel warm up in winter?
Manual information:
The steering wheel contains a heating element that helps warm your hands in cold weather. The heated steering wheel has only one temperature setting. Once the heated steering wheel has been turned on, it will stay on until the operator turns it off. The heated steering wheel may not turn on when it is already warm. Persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury, medication, alcohol use, exhaustion, or other physical conditions must exercise care when using the steering wheel heater. It may cause burns even at low temperatures, especially if used for long periods. Do not place anything on the steering wheel that insulates against heat, such as a blanket or steering wheel covers of any type and material. This may cause the steering wheel heater to overheat. The heated steering wheel button is located on the center of the instrument panel below the radio screen, and within the Climate or Controls screen of the touchscreen. When Remote Start is activated, the front and rear defrost will automatically turn on in cold weather. The heated steering wheel and driver heated seat feature will also turn on if programmed in the Comfort menu screen within Uconnect Settings Press the heated steering wheel button once to turn the heating element on. Press the heated steering wheel button a second time to turn the heating element off. Did you know: voice command for climate may only be used to adjust the interior temperature of your vehicle. Voice Command will not work to adjust the heated seats or steering wheel if equipped. The engine must be running for the heated steering wheel to operate.
Answer to user's question:
|
dev_94 | Ensemble Retriever (Base) | What does the START/STOP Ignition Button 1 do? | ENGINE START/STOP Button Functions — With Driver’s Foot Off The Brake Pedal (In PARK Or NEUTRAL Position) The ENGINE START/STOP button operates similar to an ignition switch. It has three modes: OFF, ACC, and RUN. To change the ignition modes without starting the vehicle and use the accessories, follow these steps: Starting with the ignition in the OFF position. Push the ENGINE START/STOP button once to place the ignition to the ACC position (instrument cluster will display “ACC”). Push the ENGINE START/STOP button a second time to place the ignition to the RUN position (instrument cluster will display “ON/RUN”). Push the ENGINE START/STOP button a third time to return the ignition to the OFF position (instrument cluster will display “OFF”). | The START/STOP Ignition Button 1 places the ignition to the ACC position, which allows you to use the accessories without starting the vehicle. | ['R1: The START/STOP Ignition Button 1 places the ignition to the ACC position, which allows you to use the accessories without starting the vehicle.'] | {'R1': 'Supported'} | No | false | 1 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
What does the START/STOP Ignition Button 1 do?
Manual information:
ENGINE START/STOP Button Functions — With Driver’s Foot Off The Brake Pedal (In PARK Or NEUTRAL Position) The ENGINE START/STOP button operates similar to an ignition switch. It has three modes: OFF, ACC, and RUN. To change the ignition modes without starting the vehicle and use the accessories, follow these steps: Starting with the ignition in the OFF position. Push the ENGINE START/STOP button once to place the ignition to the ACC position (instrument cluster will display “ACC”). Push the ENGINE START/STOP button a second time to place the ignition to the RUN position (instrument cluster will display “ON/RUN”). Push the ENGINE START/STOP button a third time to return the ignition to the OFF position (instrument cluster will display “OFF”).
Answer to user's question:
|
dev_95 | Ensemble Retriever | What does the START/STOP Ignition Button 1 do? | ENGINE START/STOP Button Functions — With Driver’s Foot Off The Brake Pedal (In PARK Or NEUTRAL Position) The ENGINE START/STOP button operates similar to an ignition switch. It has three modes: OFF, ACC, and RUN. To change the ignition modes without starting the vehicle and use the accessories, follow these steps: Starting with the ignition in the OFF position. Push the ENGINE START/STOP button once to place the ignition to the ACC position (instrument cluster will display “ACC”). Push the ENGINE START/STOP button a second time to place the ignition to the RUN position (instrument cluster will display “ON/RUN”). Push the ENGINE START/STOP button a third time to return the ignition to the OFF position (instrument cluster will display “OFF”). Keyless Enter ‘n Go™ Ignition This feature allows the driver to operate the ignition switch with the push of a START/STOP ignition button as long as the key fob is in the passenger compartment. The START/STOP ignition button has several operating modes that are labeled and will illuminate when in position. These modes are OFF, ACC, RUN, and START. The push button ignition can be placed in the following modes: | The first push of the START/STOP Ignition Button places the ignition to the ACC position (instrument cluster will display “ACC”), allowing the driver to use the accessories without starting the vehicle. | ['R1: The first push of the START/STOP Ignition Button places the ignition to the ACC position (instrument cluster will display “ACC”), allowing the driver to use the accessories without starting the vehicle.'] | {'R1': 'Supported'} | No | false | 1 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
What does the START/STOP Ignition Button 1 do?
Manual information:
ENGINE START/STOP Button Functions — With Driver’s Foot Off The Brake Pedal (In PARK Or NEUTRAL Position) The ENGINE START/STOP button operates similar to an ignition switch. It has three modes: OFF, ACC, and RUN. To change the ignition modes without starting the vehicle and use the accessories, follow these steps: Starting with the ignition in the OFF position. Push the ENGINE START/STOP button once to place the ignition to the ACC position (instrument cluster will display “ACC”). Push the ENGINE START/STOP button a second time to place the ignition to the RUN position (instrument cluster will display “ON/RUN”). Push the ENGINE START/STOP button a third time to return the ignition to the OFF position (instrument cluster will display “OFF”). Keyless Enter ‘n Go™ Ignition This feature allows the driver to operate the ignition switch with the push of a START/STOP ignition button as long as the key fob is in the passenger compartment. The START/STOP ignition button has several operating modes that are labeled and will illuminate when in position. These modes are OFF, ACC, RUN, and START. The push button ignition can be placed in the following modes:
Answer to user's question:
|
dev_96 | Lucene Search | What does the START/STOP Ignition Button 1 do? | START The engine will start. Note: In case the ignition switch does not change with the push of the START/STOP ignition button, the key fob may have a low or depleted battery. In this situation, a backup method can be used to operate the ignition switch. Put the nose side of the key fob (side with the mechanical flip key) against the START/STOP ignition button and push to operate the ignition switch. CAUTION: Do not press the mechanical key against the START/STOP ignition button. Do not use sharp metal objects (e.g. screwdriver etc.) to pry the button out of the ignition switch. This button comes as an assembly, and is not removable. This can damage the silicone shield. WARNING: When exiting the vehicle, always remove the key fob from the vehicle and lock your vehicle. Never leave children alone in a vehicle, or with access to an unlocked vehicle. Allowing children to be in a vehicle unattended is dangerous for a number of reasons. A child or others could be seriously or fatally injured. Children should be warned not to touch the parking brake, brake pedal or the gear selector. Do not leave the key fob in or near the vehicle, or in a location accessible to children, and do not leave the Keyless Enter ‘n Go™ Ignition in the ON/RUN position. A child could operate power windows, other controls, or move the vehicle. Do not leave children or animals inside parked vehicles in hot weather. Interior heat buildup may cause serious injury or death. CAUTION: An unlocked vehicle is an invitation for thieves. Always remove key fob from the vehicle and lock all doors when leaving the vehicle unattended. Note: When opening the driver's door with the ignition in the ON/RUN (engine not running) position, a chime will sound to remind you to place the ignition in the OFF position. In addition to the chime, the message will display “Ignition Or Accessory On” in the cluster. | The START/STOP Ignition Button is used to operate the ignition switch and start the engine. If the ignition switch does not change with the push of the button, it may be due to a low or depleted battery in the key fob. In this case, a backup method can be used by putting the nose side of the key fob against the START/STOP ignition button and pushing to operate the ignition switch. However, it is important to note that the mechanical key should not be pressed against the button, and sharp metal objects should not be used to pry the button out of the ignition switch as this can cause damage. | ['R1: The START/STOP Ignition Button is used to operate the ignition switch and start the engine.', 'R2: If the ignition switch does not change with the push of the button, it may be due to a low or depleted battery in the key fob.', 'R3: In this case, a backup method can be used by putting the nose side of the key fob against the START/STOP ignition button and pushing to operate the ignition switch.', 'R4: However, it is important to note that the mechanical key should not be pressed against the button, and sharp metal objects should not be used to pry the button out of the ignition switch as this can cause damage.'] | {'R1': 'Supported', 'R2': 'Supported', 'R3': 'Supported', 'R4': 'Supported'} | No | false | 1 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
What does the START/STOP Ignition Button 1 do?
Manual information:
START The engine will start. Note: In case the ignition switch does not change with the push of the START/STOP ignition button, the key fob may have a low or depleted battery. In this situation, a backup method can be used to operate the ignition switch. Put the nose side of the key fob (side with the mechanical flip key) against the START/STOP ignition button and push to operate the ignition switch. CAUTION: Do not press the mechanical key against the START/STOP ignition button. Do not use sharp metal objects (e.g. screwdriver etc.) to pry the button out of the ignition switch. This button comes as an assembly, and is not removable. This can damage the silicone shield. WARNING: When exiting the vehicle, always remove the key fob from the vehicle and lock your vehicle. Never leave children alone in a vehicle, or with access to an unlocked vehicle. Allowing children to be in a vehicle unattended is dangerous for a number of reasons. A child or others could be seriously or fatally injured. Children should be warned not to touch the parking brake, brake pedal or the gear selector. Do not leave the key fob in or near the vehicle, or in a location accessible to children, and do not leave the Keyless Enter ‘n Go™ Ignition in the ON/RUN position. A child could operate power windows, other controls, or move the vehicle. Do not leave children or animals inside parked vehicles in hot weather. Interior heat buildup may cause serious injury or death. CAUTION: An unlocked vehicle is an invitation for thieves. Always remove key fob from the vehicle and lock all doors when leaving the vehicle unattended. Note: When opening the driver's door with the ignition in the ON/RUN (engine not running) position, a chime will sound to remind you to place the ignition in the OFF position. In addition to the chime, the message will display “Ignition Or Accessory On” in the cluster.
Answer to user's question:
|
dev_97 | Ensemble Retriever (Base) | How can I activate the Autostop mode? | Autostop Mode The Stop/Start feature is enabled after every normal engine start. It will remain in STOP/START NOT READY until you drive forward with a vehicle speed greater than 5 mph (8 km/h). At that time, the system will go into STOP/START READY and if all other conditions are met, can go into an STOP/START AUTOSTOP ACTIVE mode. WARNING: Vehicles with the Stop/Start system will be equipped with two batteries. Both the main and the supplemental batteries must be disconnected to completely de-energize the 12 Volt electrical system. Serious injury or death could result if you do not disconnect both batteries. To learn how to properly disconnect, see an authorized dealer. | To activate the Autostop mode, you need to drive forward with a vehicle speed greater than 5 mph (8 km/h). At that time, the system will go into STOP/START READY and if all other conditions are met, can go into an STOP/START AUTOSTOP ACTIVE mode. | ['R1: To activate the Autostop mode, you need to drive forward with a vehicle speed greater than 5 mph (8 km/h).', 'R2: At that time, the system will go into STOP/START READY and if all other conditions are met, can go into an STOP/START AUTOSTOP ACTIVE mode.'] | {'R1': 'Supported', 'R2': 'Supported'} | No | false | 1 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
How can I activate the Autostop mode?
Manual information:
Autostop Mode The Stop/Start feature is enabled after every normal engine start. It will remain in STOP/START NOT READY until you drive forward with a vehicle speed greater than 5 mph (8 km/h). At that time, the system will go into STOP/START READY and if all other conditions are met, can go into an STOP/START AUTOSTOP ACTIVE mode. WARNING: Vehicles with the Stop/Start system will be equipped with two batteries. Both the main and the supplemental batteries must be disconnected to completely de-energize the 12 Volt electrical system. Serious injury or death could result if you do not disconnect both batteries. To learn how to properly disconnect, see an authorized dealer.
Answer to user's question:
|
dev_98 | Lucene Search | How can I activate the Autostop mode? | Autostop Mode The Stop/Start feature is enabled after every normal engine start. It will remain in STOP/START NOT READY until you drive forward with a vehicle speed greater than 5 mph (8 km/h). At that time, the system will go into STOP/START READY and if all other conditions are met, can go into an STOP/START AUTOSTOP ACTIVE mode. WARNING: Vehicles with the Stop/Start system will be equipped with two batteries. Both the main and the supplemental batteries must be disconnected to completely de-energize the 12 Volt electrical system. Serious injury or death could result if you do not disconnect both batteries. To learn how to properly disconnect, see an authorized dealer. | To activate the Autostop mode, you need to drive forward with a vehicle speed greater than 5 mph (8 km/h). Once the system detects this, it will go into STOP/START READY mode and if all other conditions are met, it can go into an STOP/START AUTOSTOP ACTIVE mode. Please note that this feature is only available in vehicles equipped with the Stop/Start system. | ['R1: To activate the Autostop mode, you need to drive forward with a vehicle speed greater than 5 mph (8 km/h).', 'R2: Once the system detects this, it will go into STOP/START READY mode and if all other conditions are met, it can go into an STOP/START AUTOSTOP ACTIVE mode.', 'R3: Please note that this feature is only available in vehicles equipped with the Stop/Start system.'] | {'R1': 'Supported', 'R2': 'Supported', 'R3': 'Supported'} | No | false | 1 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
How can I activate the Autostop mode?
Manual information:
Autostop Mode The Stop/Start feature is enabled after every normal engine start. It will remain in STOP/START NOT READY until you drive forward with a vehicle speed greater than 5 mph (8 km/h). At that time, the system will go into STOP/START READY and if all other conditions are met, can go into an STOP/START AUTOSTOP ACTIVE mode. WARNING: Vehicles with the Stop/Start system will be equipped with two batteries. Both the main and the supplemental batteries must be disconnected to completely de-energize the 12 Volt electrical system. Serious injury or death could result if you do not disconnect both batteries. To learn how to properly disconnect, see an authorized dealer.
Answer to user's question:
|
dev_99 | Ensemble Retriever | How can I activate the Autostop mode? | Autostop Mode The Stop/Start feature is enabled after every normal engine start. It will remain in STOP/START NOT READY until you drive forward with a vehicle speed greater than 5 mph (8 km/h). At that time, the system will go into STOP/START READY and if all other conditions are met, can go into an STOP/START AUTOSTOP ACTIVE mode. WARNING: Vehicles with the Stop/Start system will be equipped with two batteries. Both the main and the supplemental batteries must be disconnected to completely de-energize the 12 Volt electrical system. Serious injury or death could result if you do not disconnect both batteries. To learn how to properly disconnect, see an authorized dealer. To Activate The STOP/START AUTOSTOP ACTIVE Mode, The Following Must Occur: The system must be in STOP/START READY state. A STOP/START READY message will be displayed in the instrument clusterVehicle speed must be less than 2 mph (3 km/h). The gear selector must be in the NEUTRAL position and the clutch pedal must be fully released. The engine will shut down, the tachometer will fall to the stop/start position, the stop/start autostop active message will appear, and the heater/air conditioning (hvac) air flow will be reduced. To Activate The Autostop Mode, The Following Must Occur: The system must be in STOP/START READY state. A STOP/START READY message will be displayed in the instrument cluster display within the Stop/Start sectionThe vehicle must be completely stopped. The gear selector must be in a forward gear and the brake pedal pressed. The engine will shut down, the tachometer will move to the zero position and the Stop/Start telltale will illuminate indicating you are in Autostop. Customer settings will be maintained upon return to an engine-running condition. | To activate the Autostop mode, the following must occur: 1. The system must be in STOP/START READY state. A STOP/START READY message will be displayed in the instrument cluster display within the Stop/Start section. 2. The vehicle must be completely stopped. 3. The gear selector must be in a forward gear and the brake pedal pressed. Once these conditions are met, the engine will shut down, the tachometer will move to the zero position, and the Stop/Start telltale will illuminate indicating that you are in Autostop. | ['R1: To activate the Autostop mode, the following must occur: 1.', 'R2: The system must be in STOP/START READY state.', 'R3: A STOP/START READY message will be displayed in the instrument cluster display within the Stop/Start section.', 'R4: 2. The vehicle must be completely stopped.', 'R5: 3. The gear selector must be in a forward gear and the brake pedal pressed.', 'R6: Once these conditions are met, the engine will shut down, the tachometer will move to the zero position, and the Stop/Start telltale will illuminate indicating that you are in Autostop.'] | {'R1': 'Supported', 'R2': 'Supported', 'R3': 'Supported', 'R4': 'Supported', 'R5': 'Supported', 'R6': 'Supported'} | No | false | 1 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
How can I activate the Autostop mode?
Manual information:
Autostop Mode The Stop/Start feature is enabled after every normal engine start. It will remain in STOP/START NOT READY until you drive forward with a vehicle speed greater than 5 mph (8 km/h). At that time, the system will go into STOP/START READY and if all other conditions are met, can go into an STOP/START AUTOSTOP ACTIVE mode. WARNING: Vehicles with the Stop/Start system will be equipped with two batteries. Both the main and the supplemental batteries must be disconnected to completely de-energize the 12 Volt electrical system. Serious injury or death could result if you do not disconnect both batteries. To learn how to properly disconnect, see an authorized dealer. To Activate The STOP/START AUTOSTOP ACTIVE Mode, The Following Must Occur: The system must be in STOP/START READY state. A STOP/START READY message will be displayed in the instrument clusterVehicle speed must be less than 2 mph (3 km/h). The gear selector must be in the NEUTRAL position and the clutch pedal must be fully released. The engine will shut down, the tachometer will fall to the stop/start position, the stop/start autostop active message will appear, and the heater/air conditioning (hvac) air flow will be reduced. To Activate The Autostop Mode, The Following Must Occur: The system must be in STOP/START READY state. A STOP/START READY message will be displayed in the instrument cluster display within the Stop/Start sectionThe vehicle must be completely stopped. The gear selector must be in a forward gear and the brake pedal pressed. The engine will shut down, the tachometer will move to the zero position and the Stop/Start telltale will illuminate indicating you are in Autostop. Customer settings will be maintained upon return to an engine-running condition.
Answer to user's question:
|
dev_100 | Ensemble Retriever (Base) | how can I close the hood? | Closing The Hood To close the hood, remove the support rod from the radiator crossmember, and install into the clip on the hood. Lower the hood slowly. Secure both of the hood latches. WARNING: Be sure the hood is fully latched before driving your vehicle. If the hood is not fully latched, it could open when the vehicle is in motion and block your vision. Failure to follow this warning could result in serious injury or death. | To close the hood, you need to remove the support rod from the radiator crossmember and install it into the clip on the hood. Then, lower the hood slowly and secure both of the hood latches. It is important to make sure that the hood is fully latched before driving your vehicle to avoid any potential safety hazards. | ['R1: To close the hood, you need to remove the support rod from the radiator crossmember and install it into the clip on the hood.', 'R2: Then, lower the hood slowly and secure both of the hood latches.', 'R3: It is important to make sure that the hood is fully latched before driving your vehicle to avoid any potential safety hazards.'] | {'R1': 'Supported', 'R2': 'Supported', 'R3': 'Supported'} | No | false | 1 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
how can I close the hood?
Manual information:
Closing The Hood To close the hood, remove the support rod from the radiator crossmember, and install into the clip on the hood. Lower the hood slowly. Secure both of the hood latches. WARNING: Be sure the hood is fully latched before driving your vehicle. If the hood is not fully latched, it could open when the vehicle is in motion and block your vision. Failure to follow this warning could result in serious injury or death.
Answer to user's question:
|
dev_101 | Lucene Search | how can I close the hood? | Connected Services Vehicle Finder FAQs Can someone else locate my vehicle? Your vehicle may be located by anyone who has your PIN and access to your account. It is your responsibility to guard your PIN accordingly. See the Uconnect and SiriusXM Guardian™ terms of service for more information. How long does it take to sound my horn and flash the lights? Depending on various conditions, it can take three minutes or more for the request to get through to your vehicle. How do I turn off the horn and lights after I turn them on? If you are close enough to the vehicle, you can use the key fob to turn off the horn and lights by pushing the red Panic button. | To close the hood of your vehicle, first make sure that it is securely latched and aligned with the rest of the car. Then, gently lower the hood until it is about six inches away from the car's body. Finally, use a bit of force to push the hood down until it clicks into place. Make sure to check that the hood is securely closed before driving. | ['R1: To close the hood of your vehicle, first make sure that it is securely latched and aligned with the rest of the car.', "R2: Then, gently lower the hood until it is about six inches away from the car's body.", 'R3: Finally, use a bit of force to push the hood down until it clicks into place.', 'R4: Make sure to check that the hood is securely closed before driving.'] | {'R1': 'Supported', 'R2': 'Neither', 'R3': 'Neither', 'R4': 'Supported'} | Yes | false | 0 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
how can I close the hood?
Manual information:
Connected Services Vehicle Finder FAQs Can someone else locate my vehicle? Your vehicle may be located by anyone who has your PIN and access to your account. It is your responsibility to guard your PIN accordingly. See the Uconnect and SiriusXM Guardian™ terms of service for more information. How long does it take to sound my horn and flash the lights? Depending on various conditions, it can take three minutes or more for the request to get through to your vehicle. How do I turn off the horn and lights after I turn them on? If you are close enough to the vehicle, you can use the key fob to turn off the horn and lights by pushing the red Panic button.
Answer to user's question:
|
dev_102 | Adaptive Ensemble Search | how can I close the hood? | To close the hood, remove the support rod from the radiator crossmember, and install into the clip on the hood. Lower the hood slowly. Secure both of the hood latches. This indicator will illuminate when the hood is ajar/open and not fully closed. You or others can be badly burned by hot engine coolant (antifreeze) or steam from your radiator. If you see or hear steam coming from under the hood, do not open the hood until the radiator has had time to cool. Never open a cooling system pressure cap when the radiator or coolant bottle is hot. Keep hands, tools, clothing, and jewelry away from the radiator cooling fan when the hood is raised. The fan starts automatically and may start at any time, whether the engine is running or not. When working near the radiator cooling fan, disconnect the fan motor lead or turn the ignition to the OFF position. The fan is temperature controlled and can start at any time the ignition is in the ON position. Raise the hood slightly, and place a hand palm-side down in the center of the hood opening. Locate the safety latch in the middle, and push the latch to the right to open. Be sure the hood is fully latched before driving your vehicle. If the hood is not fully latched, it could open when the vehicle is in motion and block your vision. Failure to follow this warning could result in serious injury or death. Release both of the outside hood latches. | To close the hood, follow these steps: 1. Remove the support rod from the radiator crossmember. 2. Install the support rod into the clip on the hood. 3. Lower the hood slowly. 4. Secure both of the hood latches. 5. Be sure the hood is fully latched before driving your vehicle. | ['R1: To close the hood, follow these steps: 1.', 'R2: Remove the support rod from the radiator crossmember.', 'R3: 2. Install the support rod into the clip on the hood.', 'R4: 3. Lower the hood slowly.', 'R5: 4. Secure both of the hood latches.', 'R6: 5. Be sure the hood is fully latched before driving your vehicle.'] | {'R1': 'Supported', 'R2': 'Supported', 'R3': 'Supported', 'R4': 'Supported', 'R5': 'Supported', 'R6': 'Supported'} | No | false | 1 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
how can I close the hood?
Manual information:
To close the hood, remove the support rod from the radiator crossmember, and install into the clip on the hood. Lower the hood slowly. Secure both of the hood latches. This indicator will illuminate when the hood is ajar/open and not fully closed. You or others can be badly burned by hot engine coolant (antifreeze) or steam from your radiator. If you see or hear steam coming from under the hood, do not open the hood until the radiator has had time to cool. Never open a cooling system pressure cap when the radiator or coolant bottle is hot. Keep hands, tools, clothing, and jewelry away from the radiator cooling fan when the hood is raised. The fan starts automatically and may start at any time, whether the engine is running or not. When working near the radiator cooling fan, disconnect the fan motor lead or turn the ignition to the OFF position. The fan is temperature controlled and can start at any time the ignition is in the ON position. Raise the hood slightly, and place a hand palm-side down in the center of the hood opening. Locate the safety latch in the middle, and push the latch to the right to open. Be sure the hood is fully latched before driving your vehicle. If the hood is not fully latched, it could open when the vehicle is in motion and block your vision. Failure to follow this warning could result in serious injury or death. Release both of the outside hood latches.
Answer to user's question:
|
dev_103 | Adaptive Ensemble Search | Any instructions for the refueling process? | The vehicle may be equipped with a refueling funnel. Vehicles with diesel engines will have a cap to remove to begin the refueling process. If refueling is necessary, while using an approved gas can, insert the refueling funnel into the filler neck opening. Take care to open both flappers with the funnel to avoid spills. The engine may be switched off even if the warning light is on: repeated interruptions of the regeneration process could cause an early deterioration of engine oil. For this reason it is always advisable to wait for the symbol to go off before turning off the engine, following the previously mentioned instructions. Do not complete the DPF regeneration process when the vehicle is stopped. See the following steps for refueling: Emergency Gas Can Refueling Warm up the engine before placing it under load. Do not operate the engine at idle for prolonged periods. Use the appropriate transmission gear to prevent engine lugging. Observe vehicle oil pressure and temperature indicators. Check the coolant and oil levels frequently. Vary throttle position at highway speeds when carrying or towing significant weight. | Yes, here are the instructions for the refueling process: 1. If refueling is necessary, while using an approved gas can, insert the refueling funnel into the filler neck opening. 2. Take care to open both flappers with the funnel to avoid spills. 3. Vehicles with diesel engines will have a cap to remove to begin the refueling process. 4. Do not complete the DPF regeneration process when the vehicle is stopped. 5. The engine may be switched off even if the warning light is on: repeated interruptions of the regeneration process could cause an early deterioration of engine oil. 6. For this reason, it is always advisable to wait for the symbol to go off before turning off the engine, following the previously mentioned instructions. I hope this helps! Let me know if you have any other questions. | ['R1: Yes, here are the instructions for the refueling process: 1.', 'R2: If refueling is necessary, while using an approved gas can, insert the refueling funnel into the filler neck opening.', 'R3: 2. Take care to open both flappers with the funnel to avoid spills.', 'R4: 3. Vehicles with diesel engines will have a cap to remove to begin the refueling process.', 'R5: 4. Do not complete the DPF regeneration process when the vehicle is stopped.', 'R6: 5. The engine may be switched off even if the warning light is on: repeated interruptions of the regeneration process could cause an early deterioration of engine oil.', 'R7: 6. For this reason, it is always advisable to wait for the symbol to go off before turning off the engine, following the previously mentioned instructions.', 'R8: I hope this helps!', 'R9: Let me know if you have any other questions.'] | {'R1': 'Supported', 'R2': 'Supported', 'R3': 'Supported', 'R4': 'Supported', 'R5': 'Supported', 'R6': 'Supported', 'R7': 'Supported', 'R8': 'Neither', 'R9': 'Neither'} | No | false | 1 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
Any instructions for the refueling process?
Manual information:
The vehicle may be equipped with a refueling funnel. Vehicles with diesel engines will have a cap to remove to begin the refueling process. If refueling is necessary, while using an approved gas can, insert the refueling funnel into the filler neck opening. Take care to open both flappers with the funnel to avoid spills. The engine may be switched off even if the warning light is on: repeated interruptions of the regeneration process could cause an early deterioration of engine oil. For this reason it is always advisable to wait for the symbol to go off before turning off the engine, following the previously mentioned instructions. Do not complete the DPF regeneration process when the vehicle is stopped. See the following steps for refueling: Emergency Gas Can Refueling Warm up the engine before placing it under load. Do not operate the engine at idle for prolonged periods. Use the appropriate transmission gear to prevent engine lugging. Observe vehicle oil pressure and temperature indicators. Check the coolant and oil levels frequently. Vary throttle position at highway speeds when carrying or towing significant weight.
Answer to user's question:
|
dev_104 | Ensemble Retriever | Any instructions for the refueling process? | REFUELING IN EMERGENCY – IF EQUIPPED The vehicle may be equipped with a refueling funnel. Vehicles with diesel engines will have a cap to remove to begin the refueling process. If refueling is necessary, while using an approved gas can, insert the refueling funnel into the filler neck opening. Take care to open both flappers with the funnel to avoid spills. Note: In certain cold conditions, ice may prevent the fuel door from opening. If this occurs, lightly push on the fuel door to break the ice buildup and re-release the fuel door using the inside release button. Do not pry on the door. Emergency Gas Can Refueling Most gas cans will not open the flapper doors. A funnel is provided to allow emergency refueling with a gas can. See the following steps for refueling: Retrieve funnel from under the right rear seat. Fuel funnel location refueling funnel remove the fuel filler cap and insert the funnel into same filler pipe opening as the fuel nozzle. Inserting funnel ensure funnel is inserted fully to hold flapper doors open. Pour fuel into funnel opening. Caution: to avoid fuel spillage and overfilling, do not “top off” the fuel tank after filling. Remove funnel from filler pipe, clean off prior to putting back in the spare tire storage area. Tighten the fuel filler cap until clicking is heard. This is an indication the cap is properly tightened. WARNING: Never have any smoking materials lit in or near the vehicle when the fuel door is open or the tank is being filled. Never add fuel when the engine is running. This is in violation of most state and federal fire regulations and may cause the Malfunction Indicator Light to turn on. A fire may result if fuel is pumped into a portable container that is inside of a vehicle. You could be burned. Always place fuel containers on the ground while filling. REFUELING THE VEHICLE — GASOLINE ENGINE (IF EQUIPPED) | Yes, there are instructions for the refueling process. If refueling is necessary, while using an approved gas can, insert the refueling funnel into the filler neck opening. Take care to open both flappers with the funnel to avoid spills. To avoid fuel spillage and overfilling, do not “top off” the fuel tank after filling. Remove the funnel from the filler pipe, clean off prior to putting back in the spare tire storage area. Tighten the fuel filler cap until clicking is heard. This is an indication the cap is properly tightened. | ['R1: Yes, there are instructions for the refueling process.', 'R2: If refueling is necessary, while using an approved gas can, insert the refueling funnel into the filler neck opening.', 'R3: Take care to open both flappers with the funnel to avoid spills.', 'R4: To avoid fuel spillage and overfilling, do not “top off” the fuel tank after filling.', 'R5: Remove the funnel from the filler pipe, clean off prior to putting back in the spare tire storage area.', 'R6: Tighten the fuel filler cap until clicking is heard.', 'R7: This is an indication the cap is properly tightened.'] | {'R1': 'Supported', 'R2': 'Supported', 'R3': 'Supported', 'R4': 'Supported', 'R5': 'Supported', 'R6': 'Supported', 'R7': 'Supported'} | No | false | 1 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
Any instructions for the refueling process?
Manual information:
REFUELING IN EMERGENCY – IF EQUIPPED The vehicle may be equipped with a refueling funnel. Vehicles with diesel engines will have a cap to remove to begin the refueling process. If refueling is necessary, while using an approved gas can, insert the refueling funnel into the filler neck opening. Take care to open both flappers with the funnel to avoid spills. Note: In certain cold conditions, ice may prevent the fuel door from opening. If this occurs, lightly push on the fuel door to break the ice buildup and re-release the fuel door using the inside release button. Do not pry on the door. Emergency Gas Can Refueling Most gas cans will not open the flapper doors. A funnel is provided to allow emergency refueling with a gas can. See the following steps for refueling: Retrieve funnel from under the right rear seat. Fuel funnel location refueling funnel remove the fuel filler cap and insert the funnel into same filler pipe opening as the fuel nozzle. Inserting funnel ensure funnel is inserted fully to hold flapper doors open. Pour fuel into funnel opening. Caution: to avoid fuel spillage and overfilling, do not “top off” the fuel tank after filling. Remove funnel from filler pipe, clean off prior to putting back in the spare tire storage area. Tighten the fuel filler cap until clicking is heard. This is an indication the cap is properly tightened. WARNING: Never have any smoking materials lit in or near the vehicle when the fuel door is open or the tank is being filled. Never add fuel when the engine is running. This is in violation of most state and federal fire regulations and may cause the Malfunction Indicator Light to turn on. A fire may result if fuel is pumped into a portable container that is inside of a vehicle. You could be burned. Always place fuel containers on the ground while filling. REFUELING THE VEHICLE — GASOLINE ENGINE (IF EQUIPPED)
Answer to user's question:
|
dev_105 | Lucene Search | Is it recommended to use cruise control while driving on hills? | Using Cruise Control On Hills The transmission may downshift on hills to maintain the vehicle set speed. The Cruise Control system maintains speed up and down hills. A slight speed change on moderate hills is normal. On steep hills, a greater speed loss or gain may occur so it may be preferable to drive without Cruise Control. WARNING: Cruise Control can be dangerous where the system cannot maintain a constant speed. Your vehicle could go too fast for the conditions, and you could lose control and have an accident. Do not use Cruise Control in heavy traffic or on roads that are winding, icy, snow-covered or slippery. | While the Cruise Control system can maintain speed up and down hills, it is important to note that on steep hills, a greater speed loss or gain may occur, which could be dangerous. Therefore, it may be preferable to drive without Cruise Control on steep hills. Additionally, it is not recommended to use Cruise Control in heavy traffic or on roads that are winding, icy, snow-covered or slippery. | ['R1: While the Cruise Control system can maintain speed up and down hills, it is important to note that on steep hills, a greater speed loss or gain may occur, which could be dangerous.', 'R2: Therefore, it may be preferable to drive without Cruise Control on steep hills.', 'R3: Additionally, it is not recommended to use Cruise Control in heavy traffic or on roads that are winding, icy, snow-covered or slippery.'] | {'R1': 'Supported', 'R2': 'Supported', 'R3': 'Supported'} | No | false | 1 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
Is it recommended to use cruise control while driving on hills?
Manual information:
Using Cruise Control On Hills The transmission may downshift on hills to maintain the vehicle set speed. The Cruise Control system maintains speed up and down hills. A slight speed change on moderate hills is normal. On steep hills, a greater speed loss or gain may occur so it may be preferable to drive without Cruise Control. WARNING: Cruise Control can be dangerous where the system cannot maintain a constant speed. Your vehicle could go too fast for the conditions, and you could lose control and have an accident. Do not use Cruise Control in heavy traffic or on roads that are winding, icy, snow-covered or slippery.
Answer to user's question:
|
dev_106 | Ensemble Retriever (Base) | Is it recommended to use cruise control while driving on hills? | Using Cruise Control On Hills The transmission may downshift on hills to maintain the vehicle set speed. The Cruise Control system maintains speed up and down hills. A slight speed change on moderate hills is normal. On steep hills, a greater speed loss or gain may occur so it may be preferable to drive without Cruise Control. WARNING: Cruise Control can be dangerous where the system cannot maintain a constant speed. Your vehicle could go too fast for the conditions, and you could lose control and have an accident. Do not use Cruise Control in heavy traffic or on roads that are winding, icy, snow-covered or slippery. | It is generally safe to use Cruise Control on hills, but on steep hills, a greater speed loss or gain may occur, so it may be preferable to drive without Cruise Control. The warning advises against using Cruise Control in heavy traffic or on roads that are winding, icy, snow-covered, or slippery. Therefore, it is recommended to use Cruise Control on hills with caution and only when the conditions are suitable. | ['R1: It is generally safe to use Cruise Control on hills, but on steep hills, a greater speed loss or gain may occur, so it may be preferable to drive without Cruise Control.', 'R2: The warning advises against using Cruise Control in heavy traffic or on roads that are winding, icy, snow-covered, or slippery.', 'R3: Therefore, it is recommended to use Cruise Control on hills with caution and only when the conditions are suitable.'] | {'R1': 'Supported', 'R2': 'Supported', 'R3': 'Neither'} | Yes | false | 0 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
Is it recommended to use cruise control while driving on hills?
Manual information:
Using Cruise Control On Hills The transmission may downshift on hills to maintain the vehicle set speed. The Cruise Control system maintains speed up and down hills. A slight speed change on moderate hills is normal. On steep hills, a greater speed loss or gain may occur so it may be preferable to drive without Cruise Control. WARNING: Cruise Control can be dangerous where the system cannot maintain a constant speed. Your vehicle could go too fast for the conditions, and you could lose control and have an accident. Do not use Cruise Control in heavy traffic or on roads that are winding, icy, snow-covered or slippery.
Answer to user's question:
|
dev_107 | Adaptive Ensemble Search | Is it recommended to use cruise control while driving on hills? | Using Cruise Control On Hills The transmission may downshift on hills to maintain the vehicle set speed. The Cruise Control system maintains speed up and down hills. A slight speed change on moderate hills is normal. On steep hills, a greater speed loss or gain may occur so it may be preferable to drive without Cruise Control. WARNING: Cruise Control can be dangerous where the system cannot maintain a constant speed. Your vehicle could go too fast for the conditions, and you could lose control and have an accident. Do not use Cruise Control in heavy traffic or on roads that are winding, icy, snow-covered or slippery. | It depends on the steepness of the hills. If the hills are moderate, then it is normal for the transmission to downshift to maintain the set speed, and the Cruise Control system can be used to maintain speed up and down the hills. However, on steep hills, a greater speed loss or gain may occur, and it may be preferable to drive without Cruise Control. Additionally, it is important to note that Cruise Control can be dangerous in certain conditions, such as heavy traffic or on roads that are winding, icy, snow-covered, or slippery. Therefore, it is recommended to use Cruise Control on hills only if the hills are moderate and the road conditions are safe. | ['R1: It depends on the steepness of the hills.', 'R2: If the hills are moderate, then it is normal for the transmission to downshift to maintain the set speed, and the Cruise Control system can be used to maintain speed up and down the hills.', 'R3: However, on steep hills, a greater speed loss or gain may occur, and it may be preferable to drive without Cruise Control.', 'R4: Additionally, it is important to note that Cruise Control can be dangerous in certain conditions, such as heavy traffic or on roads that are winding, icy, snow-covered, or slippery.', 'R5: Therefore, it is recommended to use Cruise Control on hills only if the hills are moderate and the road conditions are safe.'] | {'R1': 'Supported', 'R2': 'Supported', 'R3': 'Supported', 'R4': 'Supported', 'R5': 'Supported'} | No | false | 1 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
Is it recommended to use cruise control while driving on hills?
Manual information:
Using Cruise Control On Hills The transmission may downshift on hills to maintain the vehicle set speed. The Cruise Control system maintains speed up and down hills. A slight speed change on moderate hills is normal. On steep hills, a greater speed loss or gain may occur so it may be preferable to drive without Cruise Control. WARNING: Cruise Control can be dangerous where the system cannot maintain a constant speed. Your vehicle could go too fast for the conditions, and you could lose control and have an accident. Do not use Cruise Control in heavy traffic or on roads that are winding, icy, snow-covered or slippery.
Answer to user's question:
|
dev_108 | Lucene Search | any tips for tire changing? | Jacking and tire changing jacking and tire changing ¹ use this qr code to access your digital experience. WARNING: Do not attempt to change a tire on the side of the vehicle close to moving traffic. Pull far enough off the road to avoid the danger of being hit when operating the jack or changing the wheel. Being under a jacked-up vehicle is dangerous. The vehicle could slip off the jack and fall on you. You could be crushed. Never put any part of your body under a vehicle that is on a jack. If you need to get under a raised vehicle, take the vehicle to a service center where it can be raised on a lift. Never start or run the engine while the vehicle is on a jack. The jack is designed to be used as a tool for changing tires only. The jack should not be used to lift the vehicle for service purposes. The vehicle should be jacked on a firm level surface only. Avoid ice or slippery areas. | Yes, here are some tips for tire changing: 1. Always make sure you are in a safe location, away from moving traffic, before attempting to change a tire. 2. Use the jack only for changing tires and make sure to follow the manufacturer's instructions for proper use. 3. Before jacking up the vehicle, loosen the lug nuts on the tire you need to change. 4. When jacking up the vehicle, make sure it is on a firm and level surface. 5. Once the vehicle is jacked up, remove the lug nuts and the flat tire. 6. Install the spare tire and tighten the lug nuts by hand. 7. Lower the vehicle and tighten the lug nuts with a wrench in a star pattern. 8. Check the tire pressure of the spare tire and make sure it is safe to drive on. Remember to always exercise caution and follow proper safety procedures when changing a tire. | ['R1: Yes, here are some tips for tire changing: 1.', 'R2: Always make sure you are in a safe location, away from moving traffic, before attempting to change a tire.', "R3: 2. Use the jack only for changing tires and make sure to follow the manufacturer's instructions for proper use.", 'R4: 3. Before jacking up the vehicle, loosen the lug nuts on the tire you need to change.', 'R5: 4. When jacking up the vehicle, make sure it is on a firm and level surface.', 'R6: 5. Once the vehicle is jacked up, remove the lug nuts and the flat tire.', 'R7: 6. Install the spare tire and tighten the lug nuts by hand.', 'R8: 7. Lower the vehicle and tighten the lug nuts with a wrench in a star pattern.', 'R9: 8. Check the tire pressure of the spare tire and make sure it is safe to drive on.', 'R10: Remember to always exercise caution and follow proper safety procedures when changing a tire.'] | {'R1': 'Supported', 'R2': 'Supported', 'R3': 'Supported', 'R4': 'Supported', 'R5': 'Supported', 'R6': 'Neither', 'R7': 'Neither', 'R8': 'Neither', 'R9': 'Neither', 'R10': 'Neither'} | Yes | false | 0 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
any tips for tire changing?
Manual information:
Jacking and tire changing jacking and tire changing ¹ use this qr code to access your digital experience. WARNING: Do not attempt to change a tire on the side of the vehicle close to moving traffic. Pull far enough off the road to avoid the danger of being hit when operating the jack or changing the wheel. Being under a jacked-up vehicle is dangerous. The vehicle could slip off the jack and fall on you. You could be crushed. Never put any part of your body under a vehicle that is on a jack. If you need to get under a raised vehicle, take the vehicle to a service center where it can be raised on a lift. Never start or run the engine while the vehicle is on a jack. The jack is designed to be used as a tool for changing tires only. The jack should not be used to lift the vehicle for service purposes. The vehicle should be jacked on a firm level surface only. Avoid ice or slippery areas.
Answer to user's question:
|
dev_111 | Ensemble Retriever (Base) | The brake light is on. what does it mean? | Brake System Warning Light The red Brake System Warning Light will turn on when the ignition is placed in the ON/RUN mode, and may stay on for as long as four seconds. If the Brake System Warning Light remains on or comes on while driving, it indicates that the brake system is not functioning properly and that immediate service is required. If the Brake System Warning Light does not come on when the ignition is placed in the ON/RUN mode, have the light repaired as soon as possible. | If the Brake System Warning Light remains on or comes on while driving, it indicates that the brake system is not functioning properly and that immediate service is required. Therefore, if the brake light is on, it means that there is an issue with the brake system and it requires immediate attention from a qualified mechanic. | ['R1: If the Brake System Warning Light remains on or comes on while driving, it indicates that the brake system is not functioning properly and that immediate service is required.', 'R2: Therefore, if the brake light is on, it means that there is an issue with the brake system and it requires immediate attention from a qualified mechanic.'] | {'R1': 'Supported', 'R2': 'Supported'} | No | false | 1 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
The brake light is on. what does it mean?
Manual information:
Brake System Warning Light The red Brake System Warning Light will turn on when the ignition is placed in the ON/RUN mode, and may stay on for as long as four seconds. If the Brake System Warning Light remains on or comes on while driving, it indicates that the brake system is not functioning properly and that immediate service is required. If the Brake System Warning Light does not come on when the ignition is placed in the ON/RUN mode, have the light repaired as soon as possible.
Answer to user's question:
|
dev_112 | Adaptive Ensemble Search | The brake light is on. what does it mean? | If the Brake System Warning Light remains on or comes on while driving, it indicates that the brake system is not functioning properly and that immediate service is required. If the Brake System Warning Light does not come on when the ignition is placed in the ON/RUN mode, have the light repaired as soon as possible. Operation of the Brake Warning Light can be checked by turning the ignition switch from the OFF position to the ON/RUN position. The light should illuminate for approximately two seconds. The light should then turn off unless the parking brake is applied or a brake fault is detected. If the light does not illuminate, have the light inspected by an authorized dealer. This warning light will illuminate to signal a fault with the 4WD system. If the light stays on or comes on during driving, it means that the 4WD system is not functioning properly and that service is required. It is recommend you drive to the nearest service center and have the vehicle serviced immediately. This warning light monitors various brake functions, including brake fluid level and parking brake application. If the brake light turns on it may indicate that the parking brake is applied, that the brake fluid level is low, or that there is a problem with the Anti-Lock Brake System reservoir. If the ABS Warning Light remains on or comes on while driving, it indicates that the anti-lock portion of the brake system is not functioning and that service is required. However, the conventional brake system will continue to operate normally if the ABS Warning Light is on. This light may turn on if the accelerator and brake pedals are pressed at the same time. The red Brake System Warning Light will turn on when the ignition is placed in the ON/RUN mode, and may stay on for as long as four seconds. If the light remains on when the parking brake has been disengaged, and the fluid level is at the full mark on the master cylinder reservoir, it indicates a possible brake hydraulic system malfunction or that a problem with the Brake Booster has been detected by the Anti-Lock Brake System (ABS) / Electronic Stability Control (ESC) system. In this case, the light will remain on until the condition has been corrected. If the problem is related to the brake booster, the ABS pump will run when applying the brake, and a brake pedal pulsation may be felt during each stop. Driving a vehicle with the red brake light on is dangerous. Part of the brake system may have failed. It will take longer to stop the vehicle. You could have a collision. Have the vehicle checked immediately. If the Brake Warning Light remains on with the parking brake released, a brake system malfunction is indicated. Have the brake system serviced by an authorized dealer immediately. | If the red Brake System Warning Light is on, it means that there is a possible brake hydraulic system malfunction or a problem with the Brake Booster has been detected by the Anti-Lock Brake System (ABS) / Electronic Stability Control (ESC) system. It could also indicate that the parking brake is applied, that the brake fluid level is low, or that there is a problem with the Anti-Lock Brake System reservoir. Driving a vehicle with the red brake light on is dangerous, as part of the brake system may have failed, and it will take longer to stop the vehicle, increasing the risk of a collision. Therefore, it is recommended to have the vehicle checked immediately by an authorized dealer. | ['R1: If the red Brake System Warning Light is on, it means that there is a possible brake hydraulic system malfunction or a problem with the Brake Booster has been detected by the Anti-Lock Brake System (ABS) / Electronic Stability Control (ESC) system.', 'R2: It could also indicate that the parking brake is applied, that the brake fluid level is low, or that there is a problem with the Anti-Lock Brake System reservoir.', 'R3: Driving a vehicle with the red brake light on is dangerous, as part of the brake system may have failed, and it will take longer to stop the vehicle, increasing the risk of a collision.', 'R4: Therefore, it is recommended to have the vehicle checked immediately by an authorized dealer.'] | {'R1': 'Supported', 'R2': 'Supported', 'R3': 'Neither', 'R4': 'Supported'} | No | false | 1 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
The brake light is on. what does it mean?
Manual information:
If the Brake System Warning Light remains on or comes on while driving, it indicates that the brake system is not functioning properly and that immediate service is required. If the Brake System Warning Light does not come on when the ignition is placed in the ON/RUN mode, have the light repaired as soon as possible. Operation of the Brake Warning Light can be checked by turning the ignition switch from the OFF position to the ON/RUN position. The light should illuminate for approximately two seconds. The light should then turn off unless the parking brake is applied or a brake fault is detected. If the light does not illuminate, have the light inspected by an authorized dealer. This warning light will illuminate to signal a fault with the 4WD system. If the light stays on or comes on during driving, it means that the 4WD system is not functioning properly and that service is required. It is recommend you drive to the nearest service center and have the vehicle serviced immediately. This warning light monitors various brake functions, including brake fluid level and parking brake application. If the brake light turns on it may indicate that the parking brake is applied, that the brake fluid level is low, or that there is a problem with the Anti-Lock Brake System reservoir. If the ABS Warning Light remains on or comes on while driving, it indicates that the anti-lock portion of the brake system is not functioning and that service is required. However, the conventional brake system will continue to operate normally if the ABS Warning Light is on. This light may turn on if the accelerator and brake pedals are pressed at the same time. The red Brake System Warning Light will turn on when the ignition is placed in the ON/RUN mode, and may stay on for as long as four seconds. If the light remains on when the parking brake has been disengaged, and the fluid level is at the full mark on the master cylinder reservoir, it indicates a possible brake hydraulic system malfunction or that a problem with the Brake Booster has been detected by the Anti-Lock Brake System (ABS) / Electronic Stability Control (ESC) system. In this case, the light will remain on until the condition has been corrected. If the problem is related to the brake booster, the ABS pump will run when applying the brake, and a brake pedal pulsation may be felt during each stop. Driving a vehicle with the red brake light on is dangerous. Part of the brake system may have failed. It will take longer to stop the vehicle. You could have a collision. Have the vehicle checked immediately. If the Brake Warning Light remains on with the parking brake released, a brake system malfunction is indicated. Have the brake system serviced by an authorized dealer immediately.
Answer to user's question:
|
dev_113 | Adaptive Ensemble Search | The temperature gauge is pointing to H and the car is continuously chiming. What should I do? | Tachometer Indicates the engine speed in revolutions per minute (RPM x 1000). Do not operate the engine with the tachometer pointer in the red area. Engine damage will occur. Temperature Gauge The temperature gauge shows engine coolant temperature. Any reading within the normal range indicates that the engine cooling system is operating satisfactorily. The gauge pointer will likely indicate a higher temperature when driving in hot weather, up mountain grades, or when towing a trailer. It should not be allowed to exceed the upper limits of the normal operating range. A hot engine cooling system is dangerous. You or others could be badly burned by steam or boiling coolant. It is recommended that you call an authorized dealer for service if your vehicle overheats. Driving with a hot engine cooling system could damage your vehicle. If the temperature gauge reads “H” pull over and stop the vehicle. Idle the vehicle with the air conditioner turned off until the pointer drops back into the normal range. If the pointer remains on the “H”, turn the engine off immediately and call an authorized dealer for service. Instrument Cluster Display The instrument cluster display features a driver interactive display Fuel Gauge The pointer shows the level of fuel in the fuel tank when the ignition switch is in the ON/RUN position. The fuel pump symbol points to the side of the vehicle where the fuel filler door is located Speedometer Indicates vehicle speed. The temperature gauge shows engine coolant temperature. Any reading within the normal range indicates that the engine cooling system is operating satisfactorily. The gauge pointer will likely indicate a higher temperature when driving in hot weather, up mountain grades, or when towing a trailer. It should not be allowed to exceed the upper limits of the normal operating range. A hot engine cooling system is dangerous. You or others could be badly burned by steam or boiling coolant. It is recommended that you call an authorized dealer for service if your vehicle overheats. Driving with a hot engine cooling system could damage your vehicle. If the temperature gauge reads “H” pull over and stop the vehicle. Idle the vehicle with the air conditioner turned off until the pointer drops back into the normal range. If the pointer remains on the “H”, turn the engine off immediately and call an authorized dealer for service. Driving with a hot cooling system could damage your vehicle. If the temperature gauge reads “H,” pull over and stop the vehicle. Idle the vehicle with the air conditioner turned off until the pointer drops back into the normal range. If the pointer remains on the “H” and you hear continuous chimes, turn the engine off immediately and call for service. This warning light warns of an overheated engine condition. If the engine coolant temperature is too high, this indicator will illuminate and a single chime will sound. If the temperature reaches the upper limit, a continuous chime will sound for four minutes or until the engine is able to cool; whichever comes first. | If the temperature gauge is pointing to H and the car is continuously chiming, it means that the engine is overheating. In this situation, you should immediately pull over and stop the vehicle. Then, idle the vehicle with the air conditioner turned off until the pointer drops back into the normal range. If the pointer remains on the “H” and you hear continuous chimes, turn the engine off immediately and call for service. Driving with a hot cooling system could damage your vehicle. It is recommended that you call an authorized dealer for service if your vehicle overheats. | ['R1: If the temperature gauge is pointing to H and the car is continuously chiming, it means that the engine is overheating.', 'R2: In this situation, you should immediately pull over and stop the vehicle.', 'R3: Then, idle the vehicle with the air conditioner turned off until the pointer drops back into the normal range.', 'R4: If the pointer remains on the “H” and you hear continuous chimes, turn the engine off immediately and call for service.', 'R5: Driving with a hot cooling system could damage your vehicle.', 'R6: It is recommended that you call an authorized dealer for service if your vehicle overheats.'] | {'R1': 'Supported', 'R2': 'Supported', 'R3': 'Supported', 'R4': 'Supported', 'R5': 'Supported', 'R6': 'Supported'} | No | false | 1 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
The temperature gauge is pointing to H and the car is continuously chiming. What should I do?
Manual information:
Tachometer Indicates the engine speed in revolutions per minute (RPM x 1000). Do not operate the engine with the tachometer pointer in the red area. Engine damage will occur. Temperature Gauge The temperature gauge shows engine coolant temperature. Any reading within the normal range indicates that the engine cooling system is operating satisfactorily. The gauge pointer will likely indicate a higher temperature when driving in hot weather, up mountain grades, or when towing a trailer. It should not be allowed to exceed the upper limits of the normal operating range. A hot engine cooling system is dangerous. You or others could be badly burned by steam or boiling coolant. It is recommended that you call an authorized dealer for service if your vehicle overheats. Driving with a hot engine cooling system could damage your vehicle. If the temperature gauge reads “H” pull over and stop the vehicle. Idle the vehicle with the air conditioner turned off until the pointer drops back into the normal range. If the pointer remains on the “H”, turn the engine off immediately and call an authorized dealer for service. Instrument Cluster Display The instrument cluster display features a driver interactive display Fuel Gauge The pointer shows the level of fuel in the fuel tank when the ignition switch is in the ON/RUN position. The fuel pump symbol points to the side of the vehicle where the fuel filler door is located Speedometer Indicates vehicle speed. The temperature gauge shows engine coolant temperature. Any reading within the normal range indicates that the engine cooling system is operating satisfactorily. The gauge pointer will likely indicate a higher temperature when driving in hot weather, up mountain grades, or when towing a trailer. It should not be allowed to exceed the upper limits of the normal operating range. A hot engine cooling system is dangerous. You or others could be badly burned by steam or boiling coolant. It is recommended that you call an authorized dealer for service if your vehicle overheats. Driving with a hot engine cooling system could damage your vehicle. If the temperature gauge reads “H” pull over and stop the vehicle. Idle the vehicle with the air conditioner turned off until the pointer drops back into the normal range. If the pointer remains on the “H”, turn the engine off immediately and call an authorized dealer for service. Driving with a hot cooling system could damage your vehicle. If the temperature gauge reads “H,” pull over and stop the vehicle. Idle the vehicle with the air conditioner turned off until the pointer drops back into the normal range. If the pointer remains on the “H” and you hear continuous chimes, turn the engine off immediately and call for service. This warning light warns of an overheated engine condition. If the engine coolant temperature is too high, this indicator will illuminate and a single chime will sound. If the temperature reaches the upper limit, a continuous chime will sound for four minutes or until the engine is able to cool; whichever comes first.
Answer to user's question:
|
dev_114 | Lucene Search | The temperature gauge is pointing to H and the car is continuously chiming. What should I do? | Instrument cluster descriptions tachometer indicates the engine speed in revolutions per minute (rpm x 1000). Caution: do not operate the engine with the tachometer pointer in the red area. Engine damage will occur. Temperature gauge the temperature gauge shows engine coolant temperature. Any reading within the normal range indicates that the engine cooling system is operating satisfactorily. The gauge pointer will likely indicate a higher temperature when driving in hot weather, up mountain grades, or when towing a trailer. It should not be allowed to exceed the upper limits of the normal operating range. Warning: a hot engine cooling system is dangerous. You or others could be badly burned by steam or boiling coolant. It is recommended that you call an authorized dealer for service if your vehicle overheats. Caution: driving with a hot engine cooling system could damage your vehicle. If the temperature gauge reads “H” pull over and stop the vehicle. Idle the vehicle with the air conditioner turned off until the pointer drops back into the normal range. If the pointer remains on the “H”, turn the engine off immediately and call an authorized dealer for service. Instrument cluster display the instrument cluster display features a driver interactive display. Fuel gauge the pointer shows the level of fuel in the fuel tank when the ignition switch is in the on/run position. The fuel pump symbol points to the side of the vehicle where the fuel filler door is located Speedometer indicates vehicle speed. | If the temperature gauge is pointing to H and the car is continuously chiming, you should pull over and stop the vehicle as soon as it is safe to do so. Turn off the engine immediately to prevent any further damage. It is recommended that you call an authorized dealer for service to avoid any potential danger. Driving with a hot engine cooling system could damage your vehicle and put you and others in danger. | ['R1: If the temperature gauge is pointing to H and the car is continuously chiming, you should pull over and stop the vehicle as soon as it is safe to do so.', 'R2: Turn off the engine immediately to prevent any further damage.', 'R3: It is recommended that you call an authorized dealer for service to avoid any potential danger.', 'R4: Driving with a hot engine cooling system could damage your vehicle and put you and others in danger.'] | {'R1': 'Supported', 'R2': 'Supported', 'R3': 'Supported', 'R4': 'Supported'} | No | false | 1 | You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
The temperature gauge is pointing to H and the car is continuously chiming. What should I do?
Manual information:
Instrument cluster descriptions tachometer indicates the engine speed in revolutions per minute (rpm x 1000). Caution: do not operate the engine with the tachometer pointer in the red area. Engine damage will occur. Temperature gauge the temperature gauge shows engine coolant temperature. Any reading within the normal range indicates that the engine cooling system is operating satisfactorily. The gauge pointer will likely indicate a higher temperature when driving in hot weather, up mountain grades, or when towing a trailer. It should not be allowed to exceed the upper limits of the normal operating range. Warning: a hot engine cooling system is dangerous. You or others could be badly burned by steam or boiling coolant. It is recommended that you call an authorized dealer for service if your vehicle overheats. Caution: driving with a hot engine cooling system could damage your vehicle. If the temperature gauge reads “H” pull over and stop the vehicle. Idle the vehicle with the air conditioner turned off until the pointer drops back into the normal range. If the pointer remains on the “H”, turn the engine off immediately and call an authorized dealer for service. Instrument cluster display the instrument cluster display features a driver interactive display. Fuel gauge the pointer shows the level of fuel in the fuel tank when the ignition switch is in the on/run position. The fuel pump symbol points to the side of the vehicle where the fuel filler door is located Speedometer indicates vehicle speed.
Answer to user's question:
|
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.