sample_id
large_string | Retreival Setting
large_string | Question
large_string | Context
large_string | completion
large_string | Answer_sent_tokenized
large_string | Sentence_labels
large_string | class_hall
large_string | Does_not_answer
bool | label
int64 | prompt
string |
|---|---|---|---|---|---|---|---|---|---|---|
dev_0
|
Lucene Search
|
how to secure the hood latches?
|
Closing The Hood To close the hood, remove the support rod from the radiator crossmember, and install into the clip on the hood. Lower the hood slowly. Secure both of the hood latches. WARNING: Be sure the hood is fully latched before driving your vehicle. If the hood is not fully latched, it could open when the vehicle is in motion and block your vision. Failure to follow this warning could result in serious injury or death.
|
To secure the hood latches, you need to lower the hood slowly and make sure it is fully closed. Then, locate the hood latch on both sides of the hood and press down firmly on each latch until you hear a click. This will ensure that the hood is securely latched and will not open while driving. Finally, give the hood a gentle tug to make sure it is fully latched before driving your vehicle.
|
['R1: To secure the hood latches, you need to lower the hood slowly and make sure it is fully closed.', 'R2: Then, locate the hood latch on both sides of the hood and press down firmly on each latch until you hear a click.', 'R3: This will ensure that the hood is securely latched and will not open while driving.', 'R4: Finally, give the hood a gentle tug to make sure it is fully latched before driving your vehicle.']
|
{'R1': 'Supported', 'R2': 'Neither', 'R3': 'Supported', 'R4': 'Neither'}
|
Yes
| false
| 0
|
You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
how to secure the hood latches?
Manual information:
Closing The Hood To close the hood, remove the support rod from the radiator crossmember, and install into the clip on the hood. Lower the hood slowly. Secure both of the hood latches. WARNING: Be sure the hood is fully latched before driving your vehicle. If the hood is not fully latched, it could open when the vehicle is in motion and block your vision. Failure to follow this warning could result in serious injury or death.
Answer to user's question:
|
dev_1
|
Ensemble Retriever (Base)
|
how to secure the hood latches?
|
Closing The Hood To close the hood, remove the support rod from the radiator crossmember, and install into the clip on the hood. Lower the hood slowly. Secure both of the hood latches. WARNING: Be sure the hood is fully latched before driving your vehicle. If the hood is not fully latched, it could open when the vehicle is in motion and block your vision. Failure to follow this warning could result in serious injury or death.
|
To secure the hood latches, you need to lower the hood slowly and then engage both of the hood latches. The hood latches are usually located on the left and right sides of the hood, near the front of the vehicle. You need to push down on the hood until you hear a click, which indicates that the latch has engaged. Once both latches are securely engaged, the hood should be fully latched and safe to drive.
|
['R1: To secure the hood latches, you need to lower the hood slowly and then engage both of the hood latches.', 'R2: The hood latches are usually located on the left and right sides of the hood, near the front of the vehicle.', 'R3: You need to push down on the hood until you hear a click, which indicates that the latch has engaged.', 'R4: Once both latches are securely engaged, the hood should be fully latched and safe to drive.']
|
{'R1': 'Supported', 'R2': 'Neither', 'R3': 'Neither', 'R4': 'Supported'}
|
Yes
| false
| 0
|
You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
how to secure the hood latches?
Manual information:
Closing The Hood To close the hood, remove the support rod from the radiator crossmember, and install into the clip on the hood. Lower the hood slowly. Secure both of the hood latches. WARNING: Be sure the hood is fully latched before driving your vehicle. If the hood is not fully latched, it could open when the vehicle is in motion and block your vision. Failure to follow this warning could result in serious injury or death.
Answer to user's question:
|
dev_2
|
Adaptive Ensemble Search
|
how to secure the hood latches?
|
To close the hood, remove the support rod from the radiator crossmember, and install into the clip on the hood. Lower the hood slowly. Secure both of the hood latches. Raise the hood slightly, and place a hand palm-side down in the center of the hood opening. Locate the safety latch in the middle, and push the latch to the right to open. Release both of the outside hood latches. Be sure the hood is fully latched before driving your vehicle. If the hood is not fully latched, it could open when the vehicle is in motion and block your vision. Failure to follow this warning could result in serious injury or death. Vehicle must be at a stop and the gear selector must be in PARK. You may have to push down slightly on the hood before pushing the safety latch. While lifting the hood, use both hands. Before lifting the hood, check that the wiper arms are not in motion and not in the lifted position.
|
To secure the hood latches, you need to lower the hood slowly and make sure it is aligned properly with the latch mechanism. Then, push down firmly on the hood to engage the latch mechanism. You should hear a clicking sound when the latch is fully engaged. Repeat this process for both of the outside hood latches. Once both latches are secured, raise the hood slightly and locate the safety latch in the middle. Push the latch to the right to open it. Finally, release both of the outside hood latches and be sure the hood is fully latched before driving your vehicle.
|
['R1: To secure the hood latches, you need to lower the hood slowly and make sure it is aligned properly with the latch mechanism.', 'R2: Then, push down firmly on the hood to engage the latch mechanism.', 'R3: You should hear a clicking sound when the latch is fully engaged.', 'R4: Repeat this process for both of the outside hood latches.', 'R5: Once both latches are secured, raise the hood slightly and locate the safety latch in the middle.', 'R6: Push the latch to the right to open it.', 'R7: Finally, release both of the outside hood latches and be sure the hood is fully latched before driving your vehicle.']
|
{'R1': 'Supported', 'R2': 'Supported', 'R3': 'Supported', 'R4': 'Supported', 'R5': 'Supported', 'R6': 'Supported', 'R7': 'Supported'}
|
No
| false
| 1
|
You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
how to secure the hood latches?
Manual information:
To close the hood, remove the support rod from the radiator crossmember, and install into the clip on the hood. Lower the hood slowly. Secure both of the hood latches. Raise the hood slightly, and place a hand palm-side down in the center of the hood opening. Locate the safety latch in the middle, and push the latch to the right to open. Release both of the outside hood latches. Be sure the hood is fully latched before driving your vehicle. If the hood is not fully latched, it could open when the vehicle is in motion and block your vision. Failure to follow this warning could result in serious injury or death. Vehicle must be at a stop and the gear selector must be in PARK. You may have to push down slightly on the hood before pushing the safety latch. While lifting the hood, use both hands. Before lifting the hood, check that the wiper arms are not in motion and not in the lifted position.
Answer to user's question:
|
dev_5
|
Adaptive Ensemble Search
|
What is the function of the 4H position?
|
In the event that additional traction is required, the transfer case 4H and 4L positions can be used to lock the front and rear driveshafts together, forcing the front and rear wheels to rotate at the same speed. The 4H and 4L positions are intended for loose, slippery road surfaces only and not intended for normal driving. Driving in the 4H and 4L positions on hard-surfaced roads will cause increased tire wear and damage to the driveline components. For further information on shifting into 4H or 4L The instrument cluster alerts the driver that the vehicle is in four-wheel drive, and the front and rear driveshafts are locked together. The light will illuminate when the transfer case is shifted into the 4H position. When operating your vehicle in 4L, the engine speed will be approximately three times (four times for Rubicon models) that of the 2H or 4H positions at a given road speed. Take care not to overspeed the engine. 4H This transfer case is designed to be driven in the two-wheel drive position (2H) or four-wheel drive position (4H AUTO) for normal street and highway conditions on dry hard surfaced roads.
|
The 4H position in the transfer case is used to lock the front and rear driveshafts together, forcing the front and rear wheels to rotate at the same speed. This provides additional traction on loose, slippery road surfaces. However, it is important to note that the 4H position is not intended for normal driving and should only be used on loose, slippery road surfaces. Driving in the 4H position on hard-surfaced roads can cause increased tire wear and damage to the driveline components. The instrument cluster alerts the driver that the vehicle is in four-wheel drive, and the front and rear driveshafts are locked together. The light will illuminate when the transfer case is shifted into the 4H position.
|
['R1: The 4H position in the transfer case is used to lock the front and rear driveshafts together, forcing the front and rear wheels to rotate at the same speed.', 'R2: This provides additional traction on loose, slippery road surfaces.', 'R3: However, it is important to note that the 4H position is not intended for normal driving and should only be used on loose, slippery road surfaces.', 'R4: Driving in the 4H position on hard-surfaced roads can cause increased tire wear and damage to the driveline components.', 'R5: The instrument cluster alerts the driver that the vehicle is in four-wheel drive, and the front and rear driveshafts are locked together.', 'R6: The light will illuminate when the transfer case is shifted into the 4H position.']
|
{'R1': 'Supported', 'R2': 'Supported', 'R3': 'Supported', 'R4': 'Supported', 'R5': 'Supported', 'R6': 'Neither'}
|
No
| false
| 1
|
You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
What is the function of the 4H position?
Manual information:
In the event that additional traction is required, the transfer case 4H and 4L positions can be used to lock the front and rear driveshafts together, forcing the front and rear wheels to rotate at the same speed. The 4H and 4L positions are intended for loose, slippery road surfaces only and not intended for normal driving. Driving in the 4H and 4L positions on hard-surfaced roads will cause increased tire wear and damage to the driveline components. For further information on shifting into 4H or 4L The instrument cluster alerts the driver that the vehicle is in four-wheel drive, and the front and rear driveshafts are locked together. The light will illuminate when the transfer case is shifted into the 4H position. When operating your vehicle in 4L, the engine speed will be approximately three times (four times for Rubicon models) that of the 2H or 4H positions at a given road speed. Take care not to overspeed the engine. 4H This transfer case is designed to be driven in the two-wheel drive position (2H) or four-wheel drive position (4H AUTO) for normal street and highway conditions on dry hard surfaced roads.
Answer to user's question:
|
dev_6
|
Adaptive Ensemble Search
|
About the hard top panel storage bag, do you have any tips about its usage?
|
The Freedom Top panels storage bag allows you to store your hard top panels. The storage bag contains two compartments. Insert the left side hard top panel into the bag with the latches facing upward. Unfold the black panel divider (ensure the divider is lying flat). Insert the right side Freedom Top panel into the bag with the latches facing downward. Ensure the front panel latch is closed prior to inserting the panel into the bag. Unfold the outer flap and zip the hard top bag closed. Step Four Store the Freedom Top panels bag in a safe location. Ensure the front panel latch is closed prior to inserting the panel into the panels bag. There is a pouch located on the front of the bag to store the provided hard top edge protectors that are used when the hard top is not installed on the vehicle. Start by removing the rear window first. Use the two straps located on the bottom of each side of the rear window to remove the right and left vertical retainers, as well as the lower center retainer. Step One (Right Side Shown) Step One While keeping the rear window level, slide it outward in either direction until it is completely separate from its retainer. Do not pull downward while removing the rear window. Damage to the retainer could result. Store the rear window in the soft top rear window storage bag (if equipped), or in a safe location Step Two After removing the rear window, remove the quarter panel cover assemblies starting with either side. Disengage the quarter panel cover assembly from the bottom by pulling the fabric at the bottom upward. With two hands, grab the front of the quarter panel cover assembly and pull outward to disengage it from its retainer on the door frame. Step Four Pull the quarter panel cover assembly up and out from the bottom, then pull it down and away from the vehicle to remove. Step Five Repeat this procedure for the other quarter panel cover assembly. Store the assemblies in the soft top rear window storage bag (if equipped), or a safe location.
|
Yes, here are some tips for using the hard top panel storage bag: 1. Make sure to insert the left side hard top panel into the bag with the latches facing upward and the right side panel with the latches facing downward. 2. Ensure that the front panel latch is closed prior to inserting the panel into the bag. 3. Unfold the black panel divider and ensure that it is lying flat before inserting the right side panel. 4. Unfold the outer flap and zip the hard top bag closed. 5. Store the Freedom Top panels bag in a safe location. 6. Use the pouch located on the front of the bag to store the provided hard top edge protectors that are used when the hard top is not installed on the vehicle. By following these tips, you can ensure that your hard top panels are stored safely and securely in the storage bag.
|
['R1: Yes, here are some tips for using the hard top panel storage bag: 1.', 'R2: Make sure to insert the left side hard top panel into the bag with the latches facing upward and the right side panel with the latches facing downward.', 'R3: 2. Ensure that the front panel latch is closed prior to inserting the panel into the bag.', 'R4: 3. Unfold the black panel divider and ensure that it is lying flat before inserting the right side panel.', 'R5: 4. Unfold the outer flap and zip the hard top bag closed.', 'R6: 5. Store the Freedom Top panels bag in a safe location.', 'R7: 6. Use the pouch located on the front of the bag to store the provided hard top edge protectors that are used when the hard top is not installed on the vehicle.', 'R8: By following these tips, you can ensure that your hard top panels are stored safely and securely in the storage bag.']
|
{'R1': 'Supported', 'R2': 'Supported', 'R3': 'Supported', 'R4': 'Supported', 'R5': 'Supported', 'R6': 'Supported', 'R7': 'Supported', 'R8': 'Supported'}
|
No
| false
| 1
|
You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
About the hard top panel storage bag, do you have any tips about its usage?
Manual information:
The Freedom Top panels storage bag allows you to store your hard top panels. The storage bag contains two compartments. Insert the left side hard top panel into the bag with the latches facing upward. Unfold the black panel divider (ensure the divider is lying flat). Insert the right side Freedom Top panel into the bag with the latches facing downward. Ensure the front panel latch is closed prior to inserting the panel into the bag. Unfold the outer flap and zip the hard top bag closed. Step Four Store the Freedom Top panels bag in a safe location. Ensure the front panel latch is closed prior to inserting the panel into the panels bag. There is a pouch located on the front of the bag to store the provided hard top edge protectors that are used when the hard top is not installed on the vehicle. Start by removing the rear window first. Use the two straps located on the bottom of each side of the rear window to remove the right and left vertical retainers, as well as the lower center retainer. Step One (Right Side Shown) Step One While keeping the rear window level, slide it outward in either direction until it is completely separate from its retainer. Do not pull downward while removing the rear window. Damage to the retainer could result. Store the rear window in the soft top rear window storage bag (if equipped), or in a safe location Step Two After removing the rear window, remove the quarter panel cover assemblies starting with either side. Disengage the quarter panel cover assembly from the bottom by pulling the fabric at the bottom upward. With two hands, grab the front of the quarter panel cover assembly and pull outward to disengage it from its retainer on the door frame. Step Four Pull the quarter panel cover assembly up and out from the bottom, then pull it down and away from the vehicle to remove. Step Five Repeat this procedure for the other quarter panel cover assembly. Store the assemblies in the soft top rear window storage bag (if equipped), or a safe location.
Answer to user's question:
|
dev_7
|
Lucene Search
|
About the hard top panel storage bag, do you have any tips about its usage?
|
Hard Top Panel(s) Storage Bag — If Equipped The Freedom Top panels storage bag allows you to store your hard top panels. The storage bag contains two compartments. Lay the bag for the panels down so the loops and hooks are facing upward. Unzip the bag and fold back the outer flap. Insert the left side hard top panel into the bag with the latches facing upward. Unfold the black panel divider (ensure the divider is lying flat). Insert the right side Freedom Top panel into the bag with the latches facing downward. Note: ensure the front panel latch is closed prior to inserting the panel into the bag. Unfold the outer flap and zip the hard top bag closed. Step four store the freedom top panels bag in a safe location. Note: Ensure the front panel latch is closed prior to inserting the panel into the panels bag. There is a pouch located on the front of the bag to store the provided hard top edge protectors that are used when the hard top is not installed on the vehicle.
|
Yes, here are some tips for using the hard top panel storage bag: 1. Make sure the loops and hooks are facing upward before laying the bag down. 2. Ensure that the black panel divider is lying flat before inserting the right side Freedom Top panel. 3. Before inserting the left side hard top panel, make sure that the latches are facing upward. 4. Ensure that the front panel latch is closed prior to inserting the panel into the bag. 5. Store the Freedom Top panels bag in a safe location. 6. Use the pouch located on the front of the bag to store the provided hard top edge protectors when the hard top is not installed on the vehicle. By following these tips, you can ensure that your hard top panels are stored safely and securely in the storage bag.
|
['R1: Yes, here are some tips for using the hard top panel storage bag: 1.', 'R2: Make sure the loops and hooks are facing upward before laying the bag down.', 'R3: 2. Ensure that the black panel divider is lying flat before inserting the right side Freedom Top panel.', 'R4: 3. Before inserting the left side hard top panel, make sure that the latches are facing upward.', 'R5: 4. Ensure that the front panel latch is closed prior to inserting the panel into the bag.', 'R6: 5. Store the Freedom Top panels bag in a safe location.', 'R7: 6. Use the pouch located on the front of the bag to store the provided hard top edge protectors when the hard top is not installed on the vehicle.', 'R8: By following these tips, you can ensure that your hard top panels are stored safely and securely in the storage bag.']
|
{'R1': 'Supported', 'R2': 'Supported', 'R3': 'Supported', 'R4': 'Supported', 'R5': 'Supported', 'R6': 'Supported', 'R7': 'Supported', 'R8': 'Supported'}
|
No
| false
| 1
|
You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
About the hard top panel storage bag, do you have any tips about its usage?
Manual information:
Hard Top Panel(s) Storage Bag — If Equipped The Freedom Top panels storage bag allows you to store your hard top panels. The storage bag contains two compartments. Lay the bag for the panels down so the loops and hooks are facing upward. Unzip the bag and fold back the outer flap. Insert the left side hard top panel into the bag with the latches facing upward. Unfold the black panel divider (ensure the divider is lying flat). Insert the right side Freedom Top panel into the bag with the latches facing downward. Note: ensure the front panel latch is closed prior to inserting the panel into the bag. Unfold the outer flap and zip the hard top bag closed. Step four store the freedom top panels bag in a safe location. Note: Ensure the front panel latch is closed prior to inserting the panel into the panels bag. There is a pouch located on the front of the bag to store the provided hard top edge protectors that are used when the hard top is not installed on the vehicle.
Answer to user's question:
|
dev_8
|
Ensemble Retriever (Base)
|
About the hard top panel storage bag, do you have any tips about its usage?
|
Hard Top Panel(s) Storage Bag — If Equipped The Freedom Top panels storage bag allows you to store your hard top panels. The storage bag contains two compartments. Lay the bag for the panels down so the loops and hooks are facing upward. Unzip the bag and fold back the outer flap. Insert the left side hard top panel into the bag with the latches facing upward. Unfold the black panel divider (ensure the divider is lying flat). Insert the right side Freedom Top panel into the bag with the latches facing downward. Note: ensure the front panel latch is closed prior to inserting the panel into the bag. Unfold the outer flap and zip the hard top bag closed. Step four store the freedom top panels bag in a safe location. Note: Ensure the front panel latch is closed prior to inserting the panel into the panels bag. There is a pouch located on the front of the bag to store the provided hard top edge protectors that are used when the hard top is not installed on the vehicle.
|
Yes, here are some tips for using the hard top panel storage bag: 1. Make sure the loops and hooks are facing upward when laying the bag down. 2. Insert the left side hard top panel with the latches facing upward and the right side Freedom Top panel with the latches facing downward. 3. Ensure the front panel latch is closed prior to inserting the panel into the bag. 4. Unfold the outer flap and zip the hard top bag closed. 5. Store the Freedom Top panels bag in a safe location. 6. Use the pouch located on the front of the bag to store the provided hard top edge protectors when the hard top is not installed on the vehicle.
|
['R1: Yes, here are some tips for using the hard top panel storage bag: 1.', 'R2: Make sure the loops and hooks are facing upward when laying the bag down.', 'R3: 2. Insert the left side hard top panel with the latches facing upward and the right side Freedom Top panel with the latches facing downward.', 'R4: 3. Ensure the front panel latch is closed prior to inserting the panel into the bag.', 'R5: 4. Unfold the outer flap and zip the hard top bag closed.', 'R6: 5. Store the Freedom Top panels bag in a safe location.', 'R7: 6. Use the pouch located on the front of the bag to store the provided hard top edge protectors when the hard top is not installed on the vehicle.']
|
{'R1': 'Supported', 'R2': 'Supported', 'R3': 'Supported', 'R4': 'Supported', 'R5': 'Supported', 'R6': 'Supported', 'R7': 'Supported'}
|
No
| false
| 1
|
You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
About the hard top panel storage bag, do you have any tips about its usage?
Manual information:
Hard Top Panel(s) Storage Bag — If Equipped The Freedom Top panels storage bag allows you to store your hard top panels. The storage bag contains two compartments. Lay the bag for the panels down so the loops and hooks are facing upward. Unzip the bag and fold back the outer flap. Insert the left side hard top panel into the bag with the latches facing upward. Unfold the black panel divider (ensure the divider is lying flat). Insert the right side Freedom Top panel into the bag with the latches facing downward. Note: ensure the front panel latch is closed prior to inserting the panel into the bag. Unfold the outer flap and zip the hard top bag closed. Step four store the freedom top panels bag in a safe location. Note: Ensure the front panel latch is closed prior to inserting the panel into the panels bag. There is a pouch located on the front of the bag to store the provided hard top edge protectors that are used when the hard top is not installed on the vehicle.
Answer to user's question:
|
dev_9
|
Ensemble Retriever (Base)
|
I found the top is relatively low today. Is it because of the freezing temperature?
|
Lowering the soft top lowering the soft top ¹ use this qr code to access your digital experience. If the temperature is below 72°F (24°C) and/or the top has been folded down for a period of time, the top will appear to have shrunk when you raise it, making it difficult to put up. This is caused by a natural contraction of the vinyl or acrylic materials of the fabric top. Place the vehicle in a warm area. Pull steadily on the top fabric. The vinyl will stretch back to its original size and the top can then be installed. If the temperature is 41°F (5°C) or below, do not attempt to put the top down or roll the rear or side curtains. WARNING: Do not drive the vehicle with the rear window up/removed unless the quarter windows are also removed. Dangerous exhaust gases could enter the vehicle causing harm to the driver and passengers. The fabric quarter windows and fabric top are designed only for protection against the elements. Do not rely on them to contain occupants within the vehicle or to protect against injury during an accident. Remember, always wear seat belts. Make sure hands and fingers are clear of all pinch points when installing and removing the soft top. The lift assist mechanism and side bows may cause serious injury if fingers or hands get caught in between. CAUTION: The soft top is not designed to carry any additional loads such as roof racks, spare tires, building, hunting or camping supplies, and/or luggage, etc. Also, it was not designed as a structural member of the vehicle and, thus, cannot properly carry any additional loads other than environmental (rain, snow, etc.). CAUTION: Do not run a fabric top through an automatic car wash. Window scratches and wax buildup may result. Do not lower the top when the temperature is below 41°F (5°C). Damage to the top may result. Do not move your vehicle until the top has been either fully attached to the windshield frame, or fully lowered. Follow the proper steps for cleaning and caring for your vehicle’s fabric topDo not use any tools (screwdrivers, etc.) to pry or force any of the clamps, clips, or retainers securing the soft top. Do not force or pry the soft top framework when opening or closing. Damage to the top may result. Failure to follow these cautions may cause interior water damage, stains, or mildew on the top material: It is recommended that the top be free of water prior to opening it. Operating the top, opening a door or lowering a window while the top is wet may allow water to drip into the vehicle's interior. Careless handling and storage of the soft top may damage the seals, causing water to leak into the vehicle's interior. The soft top must be positioned properly to ensure sealing. Improper installation can cause water to leak into the vehicle's interior.
|
It is possible that the top appears to be relatively low due to the freezing temperature causing the vinyl or acrylic materials of the fabric top to contract. However, it is recommended not to attempt to put the top down or roll the rear or side curtains if the temperature is 41°F (5°C) or below, as damage to the top may result. It is also important to follow the proper steps for cleaning and caring for the vehicle's fabric top to prevent damage and leaks.
|
['R1: It is possible that the top appears to be relatively low due to the freezing temperature causing the vinyl or acrylic materials of the fabric top to contract.', 'R2: However, it is recommended not to attempt to put the top down or roll the rear or side curtains if the temperature is 41°F (5°C) or below, as damage to the top may result.', "R3: It is also important to follow the proper steps for cleaning and caring for the vehicle's fabric top to prevent damage and leaks."]
|
{'R1': 'Supported', 'R2': 'Supported', 'R3': 'Supported'}
|
No
| false
| 1
|
You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
I found the top is relatively low today. Is it because of the freezing temperature?
Manual information:
Lowering the soft top lowering the soft top ¹ use this qr code to access your digital experience. If the temperature is below 72°F (24°C) and/or the top has been folded down for a period of time, the top will appear to have shrunk when you raise it, making it difficult to put up. This is caused by a natural contraction of the vinyl or acrylic materials of the fabric top. Place the vehicle in a warm area. Pull steadily on the top fabric. The vinyl will stretch back to its original size and the top can then be installed. If the temperature is 41°F (5°C) or below, do not attempt to put the top down or roll the rear or side curtains. WARNING: Do not drive the vehicle with the rear window up/removed unless the quarter windows are also removed. Dangerous exhaust gases could enter the vehicle causing harm to the driver and passengers. The fabric quarter windows and fabric top are designed only for protection against the elements. Do not rely on them to contain occupants within the vehicle or to protect against injury during an accident. Remember, always wear seat belts. Make sure hands and fingers are clear of all pinch points when installing and removing the soft top. The lift assist mechanism and side bows may cause serious injury if fingers or hands get caught in between. CAUTION: The soft top is not designed to carry any additional loads such as roof racks, spare tires, building, hunting or camping supplies, and/or luggage, etc. Also, it was not designed as a structural member of the vehicle and, thus, cannot properly carry any additional loads other than environmental (rain, snow, etc.). CAUTION: Do not run a fabric top through an automatic car wash. Window scratches and wax buildup may result. Do not lower the top when the temperature is below 41°F (5°C). Damage to the top may result. Do not move your vehicle until the top has been either fully attached to the windshield frame, or fully lowered. Follow the proper steps for cleaning and caring for your vehicle’s fabric topDo not use any tools (screwdrivers, etc.) to pry or force any of the clamps, clips, or retainers securing the soft top. Do not force or pry the soft top framework when opening or closing. Damage to the top may result. Failure to follow these cautions may cause interior water damage, stains, or mildew on the top material: It is recommended that the top be free of water prior to opening it. Operating the top, opening a door or lowering a window while the top is wet may allow water to drip into the vehicle's interior. Careless handling and storage of the soft top may damage the seals, causing water to leak into the vehicle's interior. The soft top must be positioned properly to ensure sealing. Improper installation can cause water to leak into the vehicle's interior.
Answer to user's question:
|
dev_10
|
Lucene Search
|
I found the top is relatively low today. Is it because of the freezing temperature?
|
Adding Washer Fluid The fluid reservoir is located in the engine compartment. Be sure to check the fluid level at regular intervals. Fill the reservoir with windshield washer solvent only (not radiator antifreeze). When refilling the washer fluid reservoir, take some washer fluid and apply it to a cloth or towel and wipe clean the wiper blades; this will help blade performance. To prevent freeze-up of your windshield washer system in cold weather, select a solution or mixture that meets or exceeds the temperature range of your climate. This rating information can be found on most washer fluid containers. WARNING: Commercial windshield washer solvents are flammable. They could ignite and burn you. Care must be exercised when filling or working around the washer solution.
|
It's possible that the freezing temperature caused the fluid level to decrease, as the fluid may have frozen and expanded, causing it to overflow or leak out. It's important to check the fluid level regularly and use a solution or mixture that meets or exceeds the temperature range of your climate to prevent freeze-up of your windshield washer system.
|
["R1: It's possible that the freezing temperature caused the fluid level to decrease, as the fluid may have frozen and expanded, causing it to overflow or leak out.", "R2: It's important to check the fluid level regularly and use a solution or mixture that meets or exceeds the temperature range of your climate to prevent freeze-up of your windshield washer system."]
|
{'R1': 'Supported', 'R2': 'Supported'}
|
No
| false
| 1
|
You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
I found the top is relatively low today. Is it because of the freezing temperature?
Manual information:
Adding Washer Fluid The fluid reservoir is located in the engine compartment. Be sure to check the fluid level at regular intervals. Fill the reservoir with windshield washer solvent only (not radiator antifreeze). When refilling the washer fluid reservoir, take some washer fluid and apply it to a cloth or towel and wipe clean the wiper blades; this will help blade performance. To prevent freeze-up of your windshield washer system in cold weather, select a solution or mixture that meets or exceeds the temperature range of your climate. This rating information can be found on most washer fluid containers. WARNING: Commercial windshield washer solvents are flammable. They could ignite and burn you. Care must be exercised when filling or working around the washer solution.
Answer to user's question:
|
dev_11
|
Adaptive Ensemble Search
|
I found the top is relatively low today. Is it because of the freezing temperature?
|
Lowering the soft top lowering the soft top ¹ use this qr code to access your digital experience. If the temperature is below 72°F (24°C) and/or the top has been folded down for a period of time, the top will appear to have shrunk when you raise it, making it difficult to put up. This is caused by a natural contraction of the vinyl or acrylic materials of the fabric top. Place the vehicle in a warm area. Pull steadily on the top fabric. The vinyl will stretch back to its original size and the top can then be installed. If the temperature is 41°F (5°C) or below, do not attempt to put the top down or roll the rear or side curtains. WARNING: Do not drive the vehicle with the rear window up/removed unless the quarter windows are also removed. Dangerous exhaust gases could enter the vehicle causing harm to the driver and passengers. The fabric quarter windows and fabric top are designed only for protection against the elements. Do not rely on them to contain occupants within the vehicle or to protect against injury during an accident. Remember, always wear seat belts. Make sure hands and fingers are clear of all pinch points when installing and removing the soft top. The lift assist mechanism and side bows may cause serious injury if fingers or hands get caught in between. CAUTION: The soft top is not designed to carry any additional loads such as roof racks, spare tires, building, hunting or camping supplies, and/or luggage, etc. Also, it was not designed as a structural member of the vehicle and, thus, cannot properly carry any additional loads other than environmental (rain, snow, etc.). CAUTION: Do not run a fabric top through an automatic car wash. Window scratches and wax buildup may result. Do not lower the top when the temperature is below 41°F (5°C). Damage to the top may result. Do not move your vehicle until the top has been either fully attached to the windshield frame, or fully lowered. Follow the proper steps for cleaning and caring for your vehicle’s fabric top Do not use any tools (screwdrivers, etc.) to pry or force any of the clamps, clips, or retainers securing the soft top. Do not force or pry the soft top framework when opening or closing. Damage to the top may result. Failure to follow these cautions may cause interior water damage, stains, or mildew on the top material: It is recommended that the top be free of water prior to opening it. Operating the top, opening a door or lowering a window while the top is wet may allow water to drip into the vehicle's interior. Careless handling and storage of the soft top may damage the seals, causing water to leak into the vehicle's interior. The soft top must be positioned properly to ensure sealing. Improper installation can cause water to leak into the vehicle's interior.
|
It is possible that the low temperature has caused the fabric top to shrink, making it difficult to put up. The contraction of the vinyl or acrylic materials of the fabric top is a natural occurrence in cold temperatures. It is recommended to place the vehicle in a warm area and pull steadily on the top fabric to stretch it back to its original size before installing it. However, it is important to note that if the temperature is 41°F (5°C) or below, you should not attempt to put the top down or roll the rear or side curtains as damage to the top may result.
|
['R1: It is possible that the low temperature has caused the fabric top to shrink, making it difficult to put up.', 'R2: The contraction of the vinyl or acrylic materials of the fabric top is a natural occurrence in cold temperatures.', 'R3: It is recommended to place the vehicle in a warm area and pull steadily on the top fabric to stretch it back to its original size before installing it.', 'R4: However, it is important to note that if the temperature is 41°F (5°C) or below, you should not attempt to put the top down or roll the rear or side curtains as damage to the top may result.']
|
{'R1': 'Supported', 'R2': 'Supported', 'R3': 'Supported', 'R4': 'Supported'}
|
No
| false
| 1
|
You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
I found the top is relatively low today. Is it because of the freezing temperature?
Manual information:
Lowering the soft top lowering the soft top ¹ use this qr code to access your digital experience. If the temperature is below 72°F (24°C) and/or the top has been folded down for a period of time, the top will appear to have shrunk when you raise it, making it difficult to put up. This is caused by a natural contraction of the vinyl or acrylic materials of the fabric top. Place the vehicle in a warm area. Pull steadily on the top fabric. The vinyl will stretch back to its original size and the top can then be installed. If the temperature is 41°F (5°C) or below, do not attempt to put the top down or roll the rear or side curtains. WARNING: Do not drive the vehicle with the rear window up/removed unless the quarter windows are also removed. Dangerous exhaust gases could enter the vehicle causing harm to the driver and passengers. The fabric quarter windows and fabric top are designed only for protection against the elements. Do not rely on them to contain occupants within the vehicle or to protect against injury during an accident. Remember, always wear seat belts. Make sure hands and fingers are clear of all pinch points when installing and removing the soft top. The lift assist mechanism and side bows may cause serious injury if fingers or hands get caught in between. CAUTION: The soft top is not designed to carry any additional loads such as roof racks, spare tires, building, hunting or camping supplies, and/or luggage, etc. Also, it was not designed as a structural member of the vehicle and, thus, cannot properly carry any additional loads other than environmental (rain, snow, etc.). CAUTION: Do not run a fabric top through an automatic car wash. Window scratches and wax buildup may result. Do not lower the top when the temperature is below 41°F (5°C). Damage to the top may result. Do not move your vehicle until the top has been either fully attached to the windshield frame, or fully lowered. Follow the proper steps for cleaning and caring for your vehicle’s fabric top Do not use any tools (screwdrivers, etc.) to pry or force any of the clamps, clips, or retainers securing the soft top. Do not force or pry the soft top framework when opening or closing. Damage to the top may result. Failure to follow these cautions may cause interior water damage, stains, or mildew on the top material: It is recommended that the top be free of water prior to opening it. Operating the top, opening a door or lowering a window while the top is wet may allow water to drip into the vehicle's interior. Careless handling and storage of the soft top may damage the seals, causing water to leak into the vehicle's interior. The soft top must be positioned properly to ensure sealing. Improper installation can cause water to leak into the vehicle's interior.
Answer to user's question:
|
dev_12
|
Ensemble Retriever (Base)
|
What is the distance range that the remote start system can reach?
|
REMOTE START — IF EQUIPPED (GASOLINE) This system uses the key fob to start the engine conveniently from outside the vehicle while still maintaining security. The system has a range of 328 ft (100 m). Remote Start is used to defrost windows in cold weather, and to reach a comfortable climate in all ambient conditions before the driver enters the vehicle. Note: The vehicle must be equipped with an automatic transmission to be equipped with Remote Start. Obstructions between the vehicle and key fob may reduce this range WARNING: Do not start or run an engine in a closed garage or confined area. Exhaust gas contains carbon monoxide (CO) which is odorless and colorless. Carbon monoxide is poisonous and can cause serious injury or death when inhaled. Keep key fobs away from children. Operation of the Remote Start system, windows, door locks or other controls could cause serious injury or death.
|
The remote start system has a range of 328 ft (100 m).
|
['R1: The remote start system has a range of 328 ft (100 m).']
|
{'R1': 'Supported'}
|
No
| false
| 1
|
You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
What is the distance range that the remote start system can reach?
Manual information:
REMOTE START — IF EQUIPPED (GASOLINE) This system uses the key fob to start the engine conveniently from outside the vehicle while still maintaining security. The system has a range of 328 ft (100 m). Remote Start is used to defrost windows in cold weather, and to reach a comfortable climate in all ambient conditions before the driver enters the vehicle. Note: The vehicle must be equipped with an automatic transmission to be equipped with Remote Start. Obstructions between the vehicle and key fob may reduce this range WARNING: Do not start or run an engine in a closed garage or confined area. Exhaust gas contains carbon monoxide (CO) which is odorless and colorless. Carbon monoxide is poisonous and can cause serious injury or death when inhaled. Keep key fobs away from children. Operation of the Remote Start system, windows, door locks or other controls could cause serious injury or death.
Answer to user's question:
|
dev_13
|
Ensemble Retriever (Base)
|
how to access the online Owner's Information?
|
Using your owner’s site your owner’s site website https://www.mopar.com/en-us.html (us residents), or www.mopar.ca (canadian residents) provides you with all the information you need, all in one place. You can track your service history, find recommended accessories for your vehicle, watch videos about your vehicle's features, and easily access your manuals. It is also where you can manage your SiriusXM Guardian™ account. This section will familiarize you with the key elements of the website that will help you get the most of your SiriusXM Guardian™ connected services. For customers in the United States, press the Sign In/Register button and enter your email address and password. For customers in Canada, press the My Vehicle button. Select from “Dashboard”, “Vehicle Health Report”, and “Recalls”. The website will then prompt you to log in using your email address and password. Edit/edit profile: to manage the details of your siriusxm guardian™ account, such as your contact information, password and siriusxm guardian™ pin, click on the edit/edit profile button to access the details of your account. Connected services status: this statement will indicate your siriusxm guardian™-equipped vehicle. Remote commands: for vehicles with an active siriusxm guardian™ subscription, press one of these icons and enter your four-digit siriusxm guardian™ security pin to remotely start (if equipped), lock/unlock doors or sound the horn and flash the lights.
|
To access the online Owner's Information, you can visit the Your Owner’s Site website at https://www.mopar.com/en-us.html (for US residents) or www.mopar.ca (for Canadian residents). Once on the website, you can track your service history, find recommended accessories for your vehicle, watch videos about your vehicle's features, and easily access your manuals. To log in, US customers can press the Sign In/Register button and enter their email address and password, while Canadian customers can press the My Vehicle button and select from “Dashboard”, “Vehicle Health Report”, and “Recalls”. The website will then prompt you to log in using your email address and password.
|
["R1: To access the online Owner's Information, you can visit the Your Owner’s Site website at https://www.mopar.com/en-us.html (for US residents) or www.mopar.ca (for Canadian residents).", "R2: Once on the website, you can track your service history, find recommended accessories for your vehicle, watch videos about your vehicle's features, and easily access your manuals.", 'R3: To log in, US customers can press the Sign In/Register button and enter their email address and password, while Canadian customers can press the My Vehicle button and select from “Dashboard”, “Vehicle Health Report”, and “Recalls”.', 'R4: The website will then prompt you to log in using your email address and password.']
|
{'R1': 'Supported', 'R2': 'Supported', 'R3': 'Supported', 'R4': 'Supported'}
|
No
| false
| 1
|
You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
how to access the online Owner's Information?
Manual information:
Using your owner’s site your owner’s site website https://www.mopar.com/en-us.html (us residents), or www.mopar.ca (canadian residents) provides you with all the information you need, all in one place. You can track your service history, find recommended accessories for your vehicle, watch videos about your vehicle's features, and easily access your manuals. It is also where you can manage your SiriusXM Guardian™ account. This section will familiarize you with the key elements of the website that will help you get the most of your SiriusXM Guardian™ connected services. For customers in the United States, press the Sign In/Register button and enter your email address and password. For customers in Canada, press the My Vehicle button. Select from “Dashboard”, “Vehicle Health Report”, and “Recalls”. The website will then prompt you to log in using your email address and password. Edit/edit profile: to manage the details of your siriusxm guardian™ account, such as your contact information, password and siriusxm guardian™ pin, click on the edit/edit profile button to access the details of your account. Connected services status: this statement will indicate your siriusxm guardian™-equipped vehicle. Remote commands: for vehicles with an active siriusxm guardian™ subscription, press one of these icons and enter your four-digit siriusxm guardian™ security pin to remotely start (if equipped), lock/unlock doors or sound the horn and flash the lights.
Answer to user's question:
|
dev_14
|
Adaptive Ensemble Search
|
Why is the Transmission Temperature Warning light on? what should I do about it?
|
Transmission Temperature Warning Light — If Equipped This warning light will illuminate to warn of a high transmission fluid temperature. This may occur with strenuous usage such as trailer towing. If this light turns on, stop the vehicle and run the engine at idle or slightly faster, with the transmission in PARK (P) or NEUTRAL (N), until the light turns off. Once the light turns off, you may continue to drive normally. If Manual transmission equipped, this warning will illuminate to warn of high clutch temperature. This may occur with driver misuse of clutch pedal or resting foot on the clutch pedal or partially engaging the clutch for longer duration. If the light turns on, it will be with an additional CLUTCH HOT message. Stop the vehicle safely and run the engine at idle with transmission gear in NEUTRAL (N) until the light turns off. Once the light turns off, follow the message displayed in the instrument cluster. WARNING: If you continue operating the vehicle when the Transmission Temperature Warning Light is illuminated you could cause the fluid to boil over, come in contact with hot engine or exhaust components and cause a fire. If you continue to operate the vehicle when the CLUTCH HOT message is displayed or Transmission Temperature Warning Light is illuminated, you could cause the clutch to overheat and cause a fire. CAUTION: Continuous driving with the Transmission Temperature Warning Light illuminated will eventually cause severe transmission damage or transmission failure. If you continue to operate the vehicle when the CLUTCH HOT message is displayed or Transmission Temperature Warning Light is illuminated, you could cause the clutch to overheat and cause severe clutch damage, transmission damage or failure.
|
The Transmission Temperature Warning light is on to warn you of a high transmission fluid temperature, which may occur with strenuous usage such as trailer towing. If the light turns on, you should stop the vehicle and run the engine at idle or slightly faster, with the transmission in PARK (P) or NEUTRAL (N), until the light turns off. Once the light turns off, you may continue to drive normally. However, if you continue operating the vehicle when the Transmission Temperature Warning Light is illuminated, you could cause the fluid to boil over, come in contact with hot engine or exhaust components and cause a fire. Therefore, it is important to take immediate action when the warning light turns on.
|
['R1: The Transmission Temperature Warning light is on to warn you of a high transmission fluid temperature, which may occur with strenuous usage such as trailer towing.', 'R2: If the light turns on, you should stop the vehicle and run the engine at idle or slightly faster, with the transmission in PARK (P) or NEUTRAL (N), until the light turns off.', 'R3: Once the light turns off, you may continue to drive normally.', 'R4: However, if you continue operating the vehicle when the Transmission Temperature Warning Light is illuminated, you could cause the fluid to boil over, come in contact with hot engine or exhaust components and cause a fire.', 'R5: Therefore, it is important to take immediate action when the warning light turns on.']
|
{'R1': 'Supported', 'R2': 'Supported', 'R3': 'Supported', 'R4': 'Supported', 'R5': 'Supported'}
|
No
| false
| 1
|
You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
Why is the Transmission Temperature Warning light on? what should I do about it?
Manual information:
Transmission Temperature Warning Light — If Equipped This warning light will illuminate to warn of a high transmission fluid temperature. This may occur with strenuous usage such as trailer towing. If this light turns on, stop the vehicle and run the engine at idle or slightly faster, with the transmission in PARK (P) or NEUTRAL (N), until the light turns off. Once the light turns off, you may continue to drive normally. If Manual transmission equipped, this warning will illuminate to warn of high clutch temperature. This may occur with driver misuse of clutch pedal or resting foot on the clutch pedal or partially engaging the clutch for longer duration. If the light turns on, it will be with an additional CLUTCH HOT message. Stop the vehicle safely and run the engine at idle with transmission gear in NEUTRAL (N) until the light turns off. Once the light turns off, follow the message displayed in the instrument cluster. WARNING: If you continue operating the vehicle when the Transmission Temperature Warning Light is illuminated you could cause the fluid to boil over, come in contact with hot engine or exhaust components and cause a fire. If you continue to operate the vehicle when the CLUTCH HOT message is displayed or Transmission Temperature Warning Light is illuminated, you could cause the clutch to overheat and cause a fire. CAUTION: Continuous driving with the Transmission Temperature Warning Light illuminated will eventually cause severe transmission damage or transmission failure. If you continue to operate the vehicle when the CLUTCH HOT message is displayed or Transmission Temperature Warning Light is illuminated, you could cause the clutch to overheat and cause severe clutch damage, transmission damage or failure.
Answer to user's question:
|
dev_15
|
Ensemble Retriever (Base)
|
How to use the car's voice recognition system?
|
Get started the vr button is used to activate/deactivate your voice recognition system. Helpful hints for using Voice Recognition: Reduce background noise. Wind noise and passenger conversations are examples of noise that may impact recognition. Speak clearly at a normal pace and volume while facing straight ahead. Each time you give a Voice Command, first push the VR button, wait until after the beep, then say your Voice Command. You can interrupt the help message or system prompts by pushing the VR button and saying a Voice Command from the current category.
|
To use the car's voice recognition system, you need to push the VR button to activate it. Reduce background noise, speak clearly at a normal pace and volume while facing straight ahead. Each time you give a Voice Command, first push the VR button, wait until after the beep, then say your Voice Command. You can interrupt the help message or system prompts by pushing the VR button and saying a Voice Command from the current category.
|
["R1: To use the car's voice recognition system, you need to push the VR button to activate it.", 'R2: Reduce background noise, speak clearly at a normal pace and volume while facing straight ahead.', 'R3: Each time you give a Voice Command, first push the VR button, wait until after the beep, then say your Voice Command.', 'R4: You can interrupt the help message or system prompts by pushing the VR button and saying a Voice Command from the current category.']
|
{'R1': 'Supported', 'R2': 'Supported', 'R3': 'Supported', 'R4': 'Supported'}
|
No
| false
| 1
|
You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
How to use the car's voice recognition system?
Manual information:
Get started the vr button is used to activate/deactivate your voice recognition system. Helpful hints for using Voice Recognition: Reduce background noise. Wind noise and passenger conversations are examples of noise that may impact recognition. Speak clearly at a normal pace and volume while facing straight ahead. Each time you give a Voice Command, first push the VR button, wait until after the beep, then say your Voice Command. You can interrupt the help message or system prompts by pushing the VR button and saying a Voice Command from the current category.
Answer to user's question:
|
dev_17
|
Adaptive Ensemble Search
|
How to use the car's voice recognition system?
|
Start using Uconnect Voice Recognition with these helpful quick tips. It provides the key Voice Commands and tips you need to know to control your vehicle’s Voice Recognition (VR) system. When the Voice button is pressed on the touchscreen, the system displays the options related to the vehicle’s Voice Recognition feature. Depending on the vehicle’s options, feature settings may vary. Notice the visual cues that inform you of your Voice Recognition system’s status. Push and hold the VR button on the steering wheel to activate a Siri voice recognition session. Apple CarPlay® allows you to use Siri to send or reply to text messages. Siri can also read incoming text messages, but drivers will not be able to read messages, as everything is done via voice. Reduce background noise. Wind noise and passenger conversations are examples of noise that may impact recognition. Speak clearly at a normal pace and volume while facing straight ahead. Each time you give a Voice Command, first push the VR button, wait until after the beep, then say your Voice Command. You can interrupt the help message or system prompts by pushing the VR button and saying a Voice Command from the current category. Android Auto™ allows you to use your voice to interact with its best-in-class speech technology through your vehicle’s voice recognition system, and use your smartphone’s data plan to project your Android™-powered smartphone and a number of its apps onto your Uconnect touchscreen. Connect your Android™ 6.0 or higher to one of the media USB ports, using the factory-provided USB cable, and press the new Android Auto™ icon that replaces your Phone icon on the main menu bar to begin Android Auto™. Push and hold the VR button on the steering wheel, or press and hold the Microphone icon within Android Auto™, to activate its VR, which recognizes natural voice commands, to use a list of your smartphone’s features: Push and hold the Voice Recognition (VR) button on the steering wheel until the beep or tap the Microphone icon to ask Google to take you to a desired destination by voice. You can also touch the Navigation icon in Android Auto™ to access other navigation apps.
|
To use your car's voice recognition system, you can follow these steps: 1. Press the Voice button on the touchscreen to display the options related to the vehicle's Voice Recognition feature. 2. Push and hold the VR button on the steering wheel to activate a Siri voice recognition session or press and hold the Microphone icon within Android Auto™ to activate its VR. 3. Speak clearly at a normal pace and volume while facing straight ahead, and reduce background noise. 4. Wait until after the beep, then say your Voice Command. 5. You can interrupt the help message or system prompts by pushing the VR button and saying a Voice Command from the current category. 6. Depending on your vehicle's options, feature settings may vary, and notice the visual cues that inform you of your Voice Recognition system's status.
|
["R1: To use your car's voice recognition system, you can follow these steps: 1.", "R2: Press the Voice button on the touchscreen to display the options related to the vehicle's Voice Recognition feature.", 'R3: 2. Push and hold the VR button on the steering wheel to activate a Siri voice recognition session or press and hold the Microphone icon within Android Auto™ to activate its VR.', 'R4: 3. Speak clearly at a normal pace and volume while facing straight ahead, and reduce background noise.', 'R5: 4. Wait until after the beep, then say your Voice Command.', 'R6: 5. You can interrupt the help message or system prompts by pushing the VR button and saying a Voice Command from the current category.', "R7: 6. Depending on your vehicle's options, feature settings may vary, and notice the visual cues that inform you of your Voice Recognition system's status."]
|
{'R1': 'Supported', 'R2': 'Supported', 'R3': 'Supported', 'R4': 'Supported', 'R5': 'Supported', 'R6': 'Supported', 'R7': 'Supported'}
|
No
| false
| 1
|
You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
How to use the car's voice recognition system?
Manual information:
Start using Uconnect Voice Recognition with these helpful quick tips. It provides the key Voice Commands and tips you need to know to control your vehicle’s Voice Recognition (VR) system. When the Voice button is pressed on the touchscreen, the system displays the options related to the vehicle’s Voice Recognition feature. Depending on the vehicle’s options, feature settings may vary. Notice the visual cues that inform you of your Voice Recognition system’s status. Push and hold the VR button on the steering wheel to activate a Siri voice recognition session. Apple CarPlay® allows you to use Siri to send or reply to text messages. Siri can also read incoming text messages, but drivers will not be able to read messages, as everything is done via voice. Reduce background noise. Wind noise and passenger conversations are examples of noise that may impact recognition. Speak clearly at a normal pace and volume while facing straight ahead. Each time you give a Voice Command, first push the VR button, wait until after the beep, then say your Voice Command. You can interrupt the help message or system prompts by pushing the VR button and saying a Voice Command from the current category. Android Auto™ allows you to use your voice to interact with its best-in-class speech technology through your vehicle’s voice recognition system, and use your smartphone’s data plan to project your Android™-powered smartphone and a number of its apps onto your Uconnect touchscreen. Connect your Android™ 6.0 or higher to one of the media USB ports, using the factory-provided USB cable, and press the new Android Auto™ icon that replaces your Phone icon on the main menu bar to begin Android Auto™. Push and hold the VR button on the steering wheel, or press and hold the Microphone icon within Android Auto™, to activate its VR, which recognizes natural voice commands, to use a list of your smartphone’s features: Push and hold the Voice Recognition (VR) button on the steering wheel until the beep or tap the Microphone icon to ask Google to take you to a desired destination by voice. You can also touch the Navigation icon in Android Auto™ to access other navigation apps.
Answer to user's question:
|
dev_18
|
Ensemble Retriever (Base)
|
what's the step-by-step procedure for fuel filler cap replacement?
|
Fuel Filler Cap The fuel filler cap is located on the left side of the vehicle. To access the fuel filler cap, push on the fuel filler door to unlatch it. To close the fuel filler door, push on it a second time. If the fuel filler cap is lost or damaged, be sure the replacement cap is the correct one for this vehicle. Open the fuel filler door. Fuel filler door remove the fuel cap by rotating it counterclockwise. Fuel filler cap fully insert the gasoline nozzle into the filler pipe. Fill the vehicle with fuel. When the fuel nozzle “clicks” or shuts off, the fuel tank is full. Wait five seconds before removing the fuel nozzle to allow excess fuel to drain from nozzle. Remove gasoline nozzle, reinstall fuel cap and close the fuel filler door. WARNING: Never have any smoking materials lit in or near the vehicle when the fuel door is open or the tank is being filled. Never add fuel when the engine is running. This is in violation of most state and federal fire regulations and may cause the Malfunction Indicator Light (MIL) to turn on. A fire may result if fuel is pumped into a portable container that is inside of a vehicle. You could be burned. Always place fuel containers on the ground while filling. CAUTION: Damage to the fuel system or emission control system could result from using an improper fuel filler cap. A poorly fitting cap could let impurities into the fuel system. Also, a poorly fitting aftermarket cap can cause the Malfunction Indicator Light (MIL) to illuminate, due to fuel vapors escaping from the system. To avoid fuel spillage and overfilling, do not “top off” the fuel tank after filling. Note: When the fuel nozzle “clicks” or shuts off, the fuel tank is full. Tighten the fuel filler cap about a quarter turn until you hear one click. This is an indication that the cap is properly tightened. If the fuel filler cap is not tightened properly, the MIL will come on. Be sure the cap is tightened every time the vehicle is refueled.
|
Here are the step-by-step procedures for fuel filler cap replacement: 1. Open the fuel filler door by pushing on it to unlatch it. 2. Remove the fuel cap by rotating it counterclockwise. 3. Check to make sure the replacement cap is the correct one for the vehicle. 4. Fully insert the replacement fuel filler cap into the filler pipe. 5. Tighten the fuel filler cap about a quarter turn until you hear one click. This is an indication that the cap is properly tightened. 6. Close the fuel filler door by pushing on it a second time. It is important to use the correct replacement fuel filler cap to avoid damage to the fuel system or emission control system. Also, be sure to tighten the cap properly every time the vehicle is refueled to prevent the Malfunction Indicator Light (MIL) from coming on.
|
['R1: Here are the step-by-step procedures for fuel filler cap replacement: 1.', 'R2: Open the fuel filler door by pushing on it to unlatch it.', 'R3: 2. Remove the fuel cap by rotating it counterclockwise.', 'R4: 3. Check to make sure the replacement cap is the correct one for the vehicle.', 'R5: 4. Fully insert the replacement fuel filler cap into the filler pipe.', 'R6: 5. Tighten the fuel filler cap about a quarter turn until you hear one click.', 'R7: This is an indication that the cap is properly tightened.', 'R8: 6. Close the fuel filler door by pushing on it a second time.', 'R9: It is important to use the correct replacement fuel filler cap to avoid damage to the fuel system or emission control system.', 'R10: Also, be sure to tighten the cap properly every time the vehicle is refueled to prevent the Malfunction Indicator Light (MIL) from coming on.']
|
{'R1': 'Neither', 'R2': 'Supported', 'R3': 'Neither', 'R4': 'Neither', 'R5': 'Neither', 'R6': 'Supported', 'R7': 'Supported', 'R8': 'Supported', 'R9': 'Supported', 'R10': 'Neither'}
|
Yes
| false
| 0
|
You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
what's the step-by-step procedure for fuel filler cap replacement?
Manual information:
Fuel Filler Cap The fuel filler cap is located on the left side of the vehicle. To access the fuel filler cap, push on the fuel filler door to unlatch it. To close the fuel filler door, push on it a second time. If the fuel filler cap is lost or damaged, be sure the replacement cap is the correct one for this vehicle. Open the fuel filler door. Fuel filler door remove the fuel cap by rotating it counterclockwise. Fuel filler cap fully insert the gasoline nozzle into the filler pipe. Fill the vehicle with fuel. When the fuel nozzle “clicks” or shuts off, the fuel tank is full. Wait five seconds before removing the fuel nozzle to allow excess fuel to drain from nozzle. Remove gasoline nozzle, reinstall fuel cap and close the fuel filler door. WARNING: Never have any smoking materials lit in or near the vehicle when the fuel door is open or the tank is being filled. Never add fuel when the engine is running. This is in violation of most state and federal fire regulations and may cause the Malfunction Indicator Light (MIL) to turn on. A fire may result if fuel is pumped into a portable container that is inside of a vehicle. You could be burned. Always place fuel containers on the ground while filling. CAUTION: Damage to the fuel system or emission control system could result from using an improper fuel filler cap. A poorly fitting cap could let impurities into the fuel system. Also, a poorly fitting aftermarket cap can cause the Malfunction Indicator Light (MIL) to illuminate, due to fuel vapors escaping from the system. To avoid fuel spillage and overfilling, do not “top off” the fuel tank after filling. Note: When the fuel nozzle “clicks” or shuts off, the fuel tank is full. Tighten the fuel filler cap about a quarter turn until you hear one click. This is an indication that the cap is properly tightened. If the fuel filler cap is not tightened properly, the MIL will come on. Be sure the cap is tightened every time the vehicle is refueled.
Answer to user's question:
|
dev_19
|
Lucene Search
|
what's the step-by-step procedure for fuel filler cap replacement?
|
Fuel Filler Cap The fuel filler cap is located on the left side of the vehicle. To access the fuel filler cap, push on the fuel filler door to unlatch it. To close the fuel filler door, push on it a second time. If the fuel filler cap is lost or damaged, be sure the replacement cap is the correct one for this vehicle. Open the fuel filler door. Fuel filler door remove the fuel cap by rotating it counterclockwise. Fuel filler cap fully insert the gasoline nozzle into the filler pipe. Fill the vehicle with fuel. When the fuel nozzle “clicks” or shuts off, the fuel tank is full. Wait five seconds before removing the fuel nozzle to allow excess fuel to drain from nozzle. Remove gasoline nozzle, reinstall fuel cap and close the fuel filler door. WARNING: Never have any smoking materials lit in or near the vehicle when the fuel door is open or the tank is being filled. Never add fuel when the engine is running. This is in violation of most state and federal fire regulations and may cause the Malfunction Indicator Light (MIL) to turn on. A fire may result if fuel is pumped into a portable container that is inside of a vehicle. You could be burned. Always place fuel containers on the ground while filling. CAUTION: Damage to the fuel system or emission control system could result from using an improper fuel filler cap. A poorly fitting cap could let impurities into the fuel system. Also, a poorly fitting aftermarket cap can cause the Malfunction Indicator Light (MIL) to illuminate, due to fuel vapors escaping from the system. To avoid fuel spillage and overfilling, do not “top off” the fuel tank after filling. Note: When the fuel nozzle “clicks” or shuts off, the fuel tank is full. Tighten the fuel filler cap about a quarter turn until you hear one click. This is an indication that the cap is properly tightened. If the fuel filler cap is not tightened properly, the MIL will come on. Be sure the cap is tightened every time the vehicle is refueled.
|
1. Open the fuel filler door by pushing on it to unlatch it. 2. Remove the fuel cap by rotating it counterclockwise. 3. Check that the replacement cap is the correct one for the vehicle. 4. Fully insert the replacement fuel filler cap into the filler pipe. 5. Tighten the fuel filler cap about a quarter turn until you hear one click. This is an indication that the cap is properly tightened. 6. Close the fuel filler door by pushing on it a second time.
|
['R1: 1. Open the fuel filler door by pushing on it to unlatch it.', 'R2: 2. Remove the fuel cap by rotating it counterclockwise.', 'R3: 3. Check that the replacement cap is the correct one for the vehicle.', 'R4: 4. Fully insert the replacement fuel filler cap into the filler pipe.', 'R5: 5. Tighten the fuel filler cap about a quarter turn until you hear one click.', 'R6: This is an indication that the cap is properly tightened.', 'R7: 6. Close the fuel filler door by pushing on it a second time.']
|
{'R1': 'Supported', 'R2': 'Supported', 'R3': 'Supported', 'R4': 'Supported', 'R5': 'Neither', 'R6': 'Supported', 'R7': 'Supported'}
|
No
| false
| 1
|
You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
what's the step-by-step procedure for fuel filler cap replacement?
Manual information:
Fuel Filler Cap The fuel filler cap is located on the left side of the vehicle. To access the fuel filler cap, push on the fuel filler door to unlatch it. To close the fuel filler door, push on it a second time. If the fuel filler cap is lost or damaged, be sure the replacement cap is the correct one for this vehicle. Open the fuel filler door. Fuel filler door remove the fuel cap by rotating it counterclockwise. Fuel filler cap fully insert the gasoline nozzle into the filler pipe. Fill the vehicle with fuel. When the fuel nozzle “clicks” or shuts off, the fuel tank is full. Wait five seconds before removing the fuel nozzle to allow excess fuel to drain from nozzle. Remove gasoline nozzle, reinstall fuel cap and close the fuel filler door. WARNING: Never have any smoking materials lit in or near the vehicle when the fuel door is open or the tank is being filled. Never add fuel when the engine is running. This is in violation of most state and federal fire regulations and may cause the Malfunction Indicator Light (MIL) to turn on. A fire may result if fuel is pumped into a portable container that is inside of a vehicle. You could be burned. Always place fuel containers on the ground while filling. CAUTION: Damage to the fuel system or emission control system could result from using an improper fuel filler cap. A poorly fitting cap could let impurities into the fuel system. Also, a poorly fitting aftermarket cap can cause the Malfunction Indicator Light (MIL) to illuminate, due to fuel vapors escaping from the system. To avoid fuel spillage and overfilling, do not “top off” the fuel tank after filling. Note: When the fuel nozzle “clicks” or shuts off, the fuel tank is full. Tighten the fuel filler cap about a quarter turn until you hear one click. This is an indication that the cap is properly tightened. If the fuel filler cap is not tightened properly, the MIL will come on. Be sure the cap is tightened every time the vehicle is refueled.
Answer to user's question:
|
dev_20
|
Adaptive Ensemble Search
|
What's function of the connection port in my car?
|
ONLY an authorized service technician should connect equipment to the OBD II connection port in order to read the VIN, diagnose, or service your vehicle. If unauthorized equipment is connected to the OBD II connection port, such as a driver-behavior tracking device, it may: Be possible that vehicle systems, including safety related systems, could be impaired or a loss of vehicle control could occur that may result in an accident involving serious injury or death. Access, or allow others to access, information stored in your vehicle systems, including personal information. Your vehicle is required to have an OBD II and a connection port to allow access to information related to the performance of your emissions controls. Authorized service technicians may need to access this information to assist with the diagnosis and service of your vehicle and emissions systemApple CarPlay® uses a USB connection while Android Auto™ uses both USB and Bluetooth® connections to function. The connected device is unavailable to other devices when connected using Android Auto™ or Apple CarPlay®. Depending on your vehicle’s specifications, the USB port may contain playback capabilities and will allow you to play music from your smartphone device or USB devices through your vehicle’s sound system. 1 — Reset Button 2 — Battery Status Button 3 — Service/Diagnostic Port (Non-charging, Non-customer use port) 4 — Type A USB Charging Port 5 — Battery Status LED 6 — Speaker Charging Port 7 — AUX Port The Smart Charging USB ports provide power to your device up to an hour after the vehicle is turned off.
|
The connection port in your car is the OBD II port, which is used by authorized service technicians to read the VIN, diagnose, or service your vehicle. It allows access to information related to the performance of your emissions controls, which may be needed for diagnosis and service of your vehicle and emissions system. It is important to note that connecting unauthorized equipment to this port, such as a driver-behavior tracking device, may impair vehicle systems, including safety-related systems, and could result in an accident involving serious injury or death. Additionally, the USB port in your car may have playback capabilities and allow you to play music from your smartphone device or USB devices through your vehicle's sound system. The Smart Charging USB ports provide power to your device up to an hour after the vehicle is turned off.
|
['R1: The connection port in your car is the OBD II port, which is used by authorized service technicians to read the VIN, diagnose, or service your vehicle.', 'R2: It allows access to information related to the performance of your emissions controls, which may be needed for diagnosis and service of your vehicle and emissions system.', 'R3: It is important to note that connecting unauthorized equipment to this port, such as a driver-behavior tracking device, may impair vehicle systems, including safety-related systems, and could result in an accident involving serious injury or death.', "R4: Additionally, the USB port in your car may have playback capabilities and allow you to play music from your smartphone device or USB devices through your vehicle's sound system.", 'R5: The Smart Charging USB ports provide power to your device up to an hour after the vehicle is turned off.']
|
{'R1': 'Supported', 'R2': 'Supported', 'R3': 'Supported', 'R4': 'Supported', 'R5': 'Supported'}
|
No
| false
| 1
|
You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
What's function of the connection port in my car?
Manual information:
ONLY an authorized service technician should connect equipment to the OBD II connection port in order to read the VIN, diagnose, or service your vehicle. If unauthorized equipment is connected to the OBD II connection port, such as a driver-behavior tracking device, it may: Be possible that vehicle systems, including safety related systems, could be impaired or a loss of vehicle control could occur that may result in an accident involving serious injury or death. Access, or allow others to access, information stored in your vehicle systems, including personal information. Your vehicle is required to have an OBD II and a connection port to allow access to information related to the performance of your emissions controls. Authorized service technicians may need to access this information to assist with the diagnosis and service of your vehicle and emissions systemApple CarPlay® uses a USB connection while Android Auto™ uses both USB and Bluetooth® connections to function. The connected device is unavailable to other devices when connected using Android Auto™ or Apple CarPlay®. Depending on your vehicle’s specifications, the USB port may contain playback capabilities and will allow you to play music from your smartphone device or USB devices through your vehicle’s sound system. 1 — Reset Button 2 — Battery Status Button 3 — Service/Diagnostic Port (Non-charging, Non-customer use port) 4 — Type A USB Charging Port 5 — Battery Status LED 6 — Speaker Charging Port 7 — AUX Port The Smart Charging USB ports provide power to your device up to an hour after the vehicle is turned off.
Answer to user's question:
|
dev_21
|
Ensemble Retriever
|
What's function of the connection port in my car?
|
AUX/USB Control The Media Hub is located on the instrument panel, below the climate controls. Behind the media hub access door, the Media Hub contains one AUX port, a Type C USB port and one standard USB port. Both USB ports allow you to play music from smartphones or USB devices through the vehicle’s sound system. Plugging in a smartphone device to a USB port may activate Android Auto™ or Apple CarPlay® features, if equipped. For further information, refer to the Uconnect Radio Instruction Manual or The Smart Charging USB ports provide power to your device up to an hour after the vehicle is turned off. For example, if a device is plugged into the Type A USB port and another device is plugged into the Type C USB port, a message will appear and allow you to select which device to use. Located inside the center console, a second USB port allows you to only charge USB devices. Depending on your vehicle’s specifications, the USB port may contain playback capabilities and will allow you to play music from your smartphone device or USB devices through your vehicle’s sound system. A third and fourth USB port are located behind the center console, above the power inverter. Both ports are charge only. When a new device or smartphone is plugged into the USB ports, one of the following message will display depending on the device being utilized: “A new device is now connected. Previous connection was lost”. “(Phone Name) now connected. Previous connection was lost”. “Another device is in use through the same USB port. Please disconnect the first device to use the second device”. Note: Once a device is connected to the USB port, it will begin charging and is ready for use with the system. Type C and Type A charge-only USB ports can be used at the same time but cannot be used simultaneously while playing media. When both Type C and Type A charge-only USB ports are in use they will be charged at a reduced rate. Both ports share a single data connection. The user cannot switch between Type A and Type C. Note: Charge unsupported devices with the Charge Only USB ports. If an unsupported device is plugged into a Media USB port, a message will display on the touchscreen that the device is not supported by the system. WARNING: Do not plug in or remove the external device while driving. Failure to follow this warning could result in a collision. Onboard Diagnostic System (OBD II) Cybersecurity Your vehicle is required to have an OBD II and a connection port to allow access to information related to the performance of your emissions controls. Authorized service technicians may need to access this information to assist with the diagnosis and service of your vehicle and emissions systemWARNING: ONLY an authorized service technician should connect equipment to the OBD II connection port in order to read the VIN, diagnose, or service your vehicle. If unauthorized equipment is connected to the obd ii connection port, such as a driver-behavior tracking device, it may: be possible that vehicle systems, including safety related systems, could be impaired or a loss of vehicle control could occur that may result in an accident involving serious injury or death. Access, or allow others to access, information stored in your vehicle systems, including personal information.
|
The connection port in your car is the OBD II port, which allows authorized service technicians to access information related to the performance of your emissions controls. This information may be needed to diagnose and service your vehicle and emissions system. It is important to note that only authorized service technicians should connect equipment to the OBD II connection port to avoid impairing vehicle systems or accessing personal information.
|
['R1: The connection port in your car is the OBD II port, which allows authorized service technicians to access information related to the performance of your emissions controls.', 'R2: This information may be needed to diagnose and service your vehicle and emissions system.', 'R3: It is important to note that only authorized service technicians should connect equipment to the OBD II connection port to avoid impairing vehicle systems or accessing personal information.']
|
{'R1': 'Supported', 'R2': 'Supported', 'R3': 'Supported'}
|
No
| false
| 1
|
You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
What's function of the connection port in my car?
Manual information:
AUX/USB Control The Media Hub is located on the instrument panel, below the climate controls. Behind the media hub access door, the Media Hub contains one AUX port, a Type C USB port and one standard USB port. Both USB ports allow you to play music from smartphones or USB devices through the vehicle’s sound system. Plugging in a smartphone device to a USB port may activate Android Auto™ or Apple CarPlay® features, if equipped. For further information, refer to the Uconnect Radio Instruction Manual or The Smart Charging USB ports provide power to your device up to an hour after the vehicle is turned off. For example, if a device is plugged into the Type A USB port and another device is plugged into the Type C USB port, a message will appear and allow you to select which device to use. Located inside the center console, a second USB port allows you to only charge USB devices. Depending on your vehicle’s specifications, the USB port may contain playback capabilities and will allow you to play music from your smartphone device or USB devices through your vehicle’s sound system. A third and fourth USB port are located behind the center console, above the power inverter. Both ports are charge only. When a new device or smartphone is plugged into the USB ports, one of the following message will display depending on the device being utilized: “A new device is now connected. Previous connection was lost”. “(Phone Name) now connected. Previous connection was lost”. “Another device is in use through the same USB port. Please disconnect the first device to use the second device”. Note: Once a device is connected to the USB port, it will begin charging and is ready for use with the system. Type C and Type A charge-only USB ports can be used at the same time but cannot be used simultaneously while playing media. When both Type C and Type A charge-only USB ports are in use they will be charged at a reduced rate. Both ports share a single data connection. The user cannot switch between Type A and Type C. Note: Charge unsupported devices with the Charge Only USB ports. If an unsupported device is plugged into a Media USB port, a message will display on the touchscreen that the device is not supported by the system. WARNING: Do not plug in or remove the external device while driving. Failure to follow this warning could result in a collision. Onboard Diagnostic System (OBD II) Cybersecurity Your vehicle is required to have an OBD II and a connection port to allow access to information related to the performance of your emissions controls. Authorized service technicians may need to access this information to assist with the diagnosis and service of your vehicle and emissions systemWARNING: ONLY an authorized service technician should connect equipment to the OBD II connection port in order to read the VIN, diagnose, or service your vehicle. If unauthorized equipment is connected to the obd ii connection port, such as a driver-behavior tracking device, it may: be possible that vehicle systems, including safety related systems, could be impaired or a loss of vehicle control could occur that may result in an accident involving serious injury or death. Access, or allow others to access, information stored in your vehicle systems, including personal information.
Answer to user's question:
|
dev_22
|
Adaptive Ensemble Search
|
The brake light remains on after the parking brake is disengaged. What goes wrong?
|
If the light remains on when the parking brake has been disengaged, and the fluid level is at the full mark on the master cylinder reservoir, it indicates a possible brake hydraulic system malfunction or that a problem with the Brake Booster has been detected by the Anti-Lock Brake System (ABS) / Electronic Stability Control (ESC) system. In this case, the light will remain on until the condition has been corrected. If the problem is related to the brake booster, the ABS pump will run when applying the brake, and a brake pedal pulsation may be felt during each stop. If the Brake Warning Light remains on with the parking brake released, a brake system malfunction is indicated. Have the brake system serviced by an authorized dealer immediately. This warning light monitors various brake functions, including brake fluid level and parking brake application. If the brake light turns on it may indicate that the parking brake is applied, that the brake fluid level is low, or that there is a problem with the Anti-Lock Brake System reservoir. When the parking brake is applied and the automatic transmission is placed in gear, the Brake Warning Light will flash. If vehicle speed is detected, a chime will sound to alert the driver. Fully release the parking brake before attempting to move the vehicle. This light only shows that the parking brake is applied. It does not show the degree of brake application. The light also will turn on when the parking brake is applied with the ignition switch in the ON/RUN position. Operation of the Brake Warning Light can be checked by turning the ignition switch from the OFF position to the ON/RUN position. The light should illuminate for approximately two seconds. The light should then turn off unless the parking brake is applied or a brake fault is detected. If the light does not illuminate, have the light inspected by an authorized dealer. When the parking brake is applied with the ignition switch ON, the Brake Warning Light in the instrument cluster will illuminate. If the headlights or parking lights are left on after the ignition is placed in the OFF position, the vehicle will chime when the driver’s door is opened. Vehicle parking brake is applied Stability event occurs Gear selector is moved out of DRIVE Engine overspeed occurs Clutch pedal is pressed (manual transmission only) Vehicle is operating at a low RPM (manual transmission only) Always apply the parking brake. Press and hold the brake pedal while pushing the ENGINE START/STOP button once. A delay of the start of up to five seconds is possible under very cold conditions. The “Wait to Start” telltale will be illuminated during the preheat process. When the engine “Wait To Start” telltale turns off the engine will automatically crank. If the Water in Fuel Indicator Light remains on, DO NOT START the engine before you drain the water from the fuel filters to avoid engine damage The system will automatically engage the starter to crank the engine. If the vehicle fails to start, the starter will disengage automatically after 25 seconds. If you wish to stop the cranking of the engine prior to the engine starting, push the ENGINE START/STOP button again. Check that the Oil Pressure Warning Light has turned off. release the parking brake
|
If the brake light remains on after the parking brake is disengaged, it indicates a possible brake hydraulic system malfunction or a problem with the Brake Booster that has been detected by the Anti-Lock Brake System (ABS) / Electronic Stability Control (ESC) system. It could also indicate a brake system malfunction, including low brake fluid level or a problem with the Anti-Lock Brake System reservoir. In this case, the light will remain on until the condition has been corrected. If the problem is related to the brake booster, the ABS pump will run when applying the brake, and a brake pedal pulsation may be felt during each stop. It is recommended to have the brake system serviced by an authorized dealer immediately.
|
['R1: If the brake light remains on after the parking brake is disengaged, it indicates a possible brake hydraulic system malfunction or a problem with the Brake Booster that has been detected by the Anti-Lock Brake System (ABS) / Electronic Stability Control (ESC) system.', 'R2: It could also indicate a brake system malfunction, including low brake fluid level or a problem with the Anti-Lock Brake System reservoir.', 'R3: In this case, the light will remain on until the condition has been corrected.', 'R4: If the problem is related to the brake booster, the ABS pump will run when applying the brake, and a brake pedal pulsation may be felt during each stop.', 'R5: It is recommended to have the brake system serviced by an authorized dealer immediately.']
|
{'R1': 'Supported', 'R2': 'Supported', 'R3': 'Supported', 'R4': 'Supported', 'R5': 'Supported'}
|
No
| false
| 1
|
You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
The brake light remains on after the parking brake is disengaged. What goes wrong?
Manual information:
If the light remains on when the parking brake has been disengaged, and the fluid level is at the full mark on the master cylinder reservoir, it indicates a possible brake hydraulic system malfunction or that a problem with the Brake Booster has been detected by the Anti-Lock Brake System (ABS) / Electronic Stability Control (ESC) system. In this case, the light will remain on until the condition has been corrected. If the problem is related to the brake booster, the ABS pump will run when applying the brake, and a brake pedal pulsation may be felt during each stop. If the Brake Warning Light remains on with the parking brake released, a brake system malfunction is indicated. Have the brake system serviced by an authorized dealer immediately. This warning light monitors various brake functions, including brake fluid level and parking brake application. If the brake light turns on it may indicate that the parking brake is applied, that the brake fluid level is low, or that there is a problem with the Anti-Lock Brake System reservoir. When the parking brake is applied and the automatic transmission is placed in gear, the Brake Warning Light will flash. If vehicle speed is detected, a chime will sound to alert the driver. Fully release the parking brake before attempting to move the vehicle. This light only shows that the parking brake is applied. It does not show the degree of brake application. The light also will turn on when the parking brake is applied with the ignition switch in the ON/RUN position. Operation of the Brake Warning Light can be checked by turning the ignition switch from the OFF position to the ON/RUN position. The light should illuminate for approximately two seconds. The light should then turn off unless the parking brake is applied or a brake fault is detected. If the light does not illuminate, have the light inspected by an authorized dealer. When the parking brake is applied with the ignition switch ON, the Brake Warning Light in the instrument cluster will illuminate. If the headlights or parking lights are left on after the ignition is placed in the OFF position, the vehicle will chime when the driver’s door is opened. Vehicle parking brake is applied Stability event occurs Gear selector is moved out of DRIVE Engine overspeed occurs Clutch pedal is pressed (manual transmission only) Vehicle is operating at a low RPM (manual transmission only) Always apply the parking brake. Press and hold the brake pedal while pushing the ENGINE START/STOP button once. A delay of the start of up to five seconds is possible under very cold conditions. The “Wait to Start” telltale will be illuminated during the preheat process. When the engine “Wait To Start” telltale turns off the engine will automatically crank. If the Water in Fuel Indicator Light remains on, DO NOT START the engine before you drain the water from the fuel filters to avoid engine damage The system will automatically engage the starter to crank the engine. If the vehicle fails to start, the starter will disengage automatically after 25 seconds. If you wish to stop the cranking of the engine prior to the engine starting, push the ENGINE START/STOP button again. Check that the Oil Pressure Warning Light has turned off. release the parking brake
Answer to user's question:
|
dev_23
|
Ensemble Retriever (Base)
|
Can I use gasoline containing methanol?
|
Gasoline/Oxygenate Blends Some fuel suppliers blend unleaded gasoline with oxygenates such as ethanol. Problems that result from using gasoline containing more than 15% ethanol (E-15) or gasoline containing methanol are not the responsibility of the manufacturer and may void the New Vehicle Limited Warranty. CAUTION: DO NOT use E-85, gasoline containing methanol, or gasoline containing more than 15% ethanol (E-15). Use of these blends may result in starting and drivability problems, damage critical fuel system components, cause emissions to exceed the applicable standard, and/or cause the Malfunction Indicator Light to illuminate. Please observe pump labels as they should clearly communicate if a fuel contains greater than 15% ethanol (E-15).
|
No, you should not use gasoline containing methanol as it may result in starting and drivability problems, damage critical fuel system components, cause emissions to exceed the applicable standard, and/or cause the Malfunction Indicator Light to illuminate.
|
['R1: No, you should not use gasoline containing methanol as it may result in starting and drivability problems, damage critical fuel system components, cause emissions to exceed the applicable standard, and/or cause the Malfunction Indicator Light to illuminate.']
|
{'R1': 'Supported'}
|
No
| false
| 1
|
You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
Can I use gasoline containing methanol?
Manual information:
Gasoline/Oxygenate Blends Some fuel suppliers blend unleaded gasoline with oxygenates such as ethanol. Problems that result from using gasoline containing more than 15% ethanol (E-15) or gasoline containing methanol are not the responsibility of the manufacturer and may void the New Vehicle Limited Warranty. CAUTION: DO NOT use E-85, gasoline containing methanol, or gasoline containing more than 15% ethanol (E-15). Use of these blends may result in starting and drivability problems, damage critical fuel system components, cause emissions to exceed the applicable standard, and/or cause the Malfunction Indicator Light to illuminate. Please observe pump labels as they should clearly communicate if a fuel contains greater than 15% ethanol (E-15).
Answer to user's question:
|
dev_24
|
Lucene Search
|
Can I use gasoline containing methanol?
|
Gasoline/Oxygenate Blends Some fuel suppliers blend unleaded gasoline with oxygenates such as ethanol. Problems that result from using gasoline containing more than 15% ethanol (E-15) or gasoline containing methanol are not the responsibility of the manufacturer and may void the New Vehicle Limited Warranty. CAUTION: DO NOT use E-85, gasoline containing methanol, or gasoline containing more than 15% ethanol (E-15). Use of these blends may result in starting and drivability problems, damage critical fuel system components, cause emissions to exceed the applicable standard, and/or cause the Malfunction Indicator Light to illuminate. Please observe pump labels as they should clearly communicate if a fuel contains greater than 15% ethanol (E-15).
|
No, you should not use gasoline containing methanol as it may result in starting and drivability problems, damage critical fuel system components, cause emissions to exceed the applicable standard, and/or cause the Malfunction Indicator Light to illuminate. It is also important to note that using gasoline containing methanol or more than 15% ethanol (E-15) may void the New Vehicle Limited Warranty. Please observe pump labels as they should clearly communicate if a fuel contains greater than 15% ethanol (E-15).
|
['R1: No, you should not use gasoline containing methanol as it may result in starting and drivability problems, damage critical fuel system components, cause emissions to exceed the applicable standard, and/or cause the Malfunction Indicator Light to illuminate.', 'R2: It is also important to note that using gasoline containing methanol or more than 15% ethanol (E-15) may void the New Vehicle Limited Warranty.', 'R3: Please observe pump labels as they should clearly communicate if a fuel contains greater than 15% ethanol (E-15).']
|
{'R1': 'Supported', 'R2': 'Supported', 'R3': 'Supported'}
|
No
| false
| 1
|
You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
Can I use gasoline containing methanol?
Manual information:
Gasoline/Oxygenate Blends Some fuel suppliers blend unleaded gasoline with oxygenates such as ethanol. Problems that result from using gasoline containing more than 15% ethanol (E-15) or gasoline containing methanol are not the responsibility of the manufacturer and may void the New Vehicle Limited Warranty. CAUTION: DO NOT use E-85, gasoline containing methanol, or gasoline containing more than 15% ethanol (E-15). Use of these blends may result in starting and drivability problems, damage critical fuel system components, cause emissions to exceed the applicable standard, and/or cause the Malfunction Indicator Light to illuminate. Please observe pump labels as they should clearly communicate if a fuel contains greater than 15% ethanol (E-15).
Answer to user's question:
|
dev_25
|
Ensemble Retriever
|
Can I use gasoline containing methanol?
|
Gasoline/Oxygenate Blends Some fuel suppliers blend unleaded gasoline with oxygenates such as ethanol. Problems that result from using gasoline containing more than 15% ethanol (E-15) or gasoline containing methanol are not the responsibility of the manufacturer and may void the New Vehicle Limited Warranty. CAUTION: DO NOT use E-85, gasoline containing methanol, or gasoline containing more than 15% ethanol (E-15). Use of these blends may result in starting and drivability problems, damage critical fuel system components, cause emissions to exceed the applicable standard, and/or cause the Malfunction Indicator Light to illuminate. Please observe pump labels as they should clearly communicate if a fuel contains greater than 15% ethanol (E-15). Fuel System Cautions CAUTION: Follow these guidelines to maintain your vehicle’s performance: The use of leaded gasoline is prohibited by Federal law. Using leaded gasoline can impair engine performance and damage the emissions control system. An out-of-tune engine, certain fuel or ignition malfunctions can cause the catalytic converter to overheat. If you notice a pungent burning odor or some light smoke, your engine may be out-of-tune or malfunctioning and may require immediate service. Contact an authorized dealer for service assistance. The use of fuel additives, which are now being sold as octane enhancers, is not recommended. Most of these products contain high concentrations of methanol. Fuel system damage or vehicle performance problems resulting from the use of such fuels or additives is not the responsibility of The manufacturer and may void or not be covered under the New Vehicle Limited Warranty. Note: Intentional tampering with the emissions control system can result in civil penalties being assessed against you. Methylcyclopentadienyl Manganese Tricarbonyl (MMT) In Gasoline MMT is a manganese-containing metallic additive that is blended into some gasolines to increase octane. Gasoline blended with MMT provides no performance advantage beyond gasoline of the same octane number without MMT. Gasoline blended with MMT reduces spark plug life and reduces emissions system performance in some vehicles. The manufacturer recommends that gasoline without MMT be used in your vehicle. The MMT content of gasoline may not be indicated on the gasoline pump; therefore, you should ask your gasoline retailer whether the gasoline contains MMT. MMT is prohibited in Federal law and California reformulated gasoline.
|
No, you should not use gasoline containing methanol as it may result in starting and drivability problems, damage critical fuel system components, cause emissions to exceed the applicable standard, and/or cause the Malfunction Indicator Light to illuminate. Additionally, using gasoline containing methanol may void the New Vehicle Limited Warranty.
|
['R1: No, you should not use gasoline containing methanol as it may result in starting and drivability problems, damage critical fuel system components, cause emissions to exceed the applicable standard, and/or cause the Malfunction Indicator Light to illuminate.', 'R2: Additionally, using gasoline containing methanol may void the New Vehicle Limited Warranty.']
|
{'R1': 'Supported', 'R2': 'Supported'}
|
No
| false
| 1
|
You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
Can I use gasoline containing methanol?
Manual information:
Gasoline/Oxygenate Blends Some fuel suppliers blend unleaded gasoline with oxygenates such as ethanol. Problems that result from using gasoline containing more than 15% ethanol (E-15) or gasoline containing methanol are not the responsibility of the manufacturer and may void the New Vehicle Limited Warranty. CAUTION: DO NOT use E-85, gasoline containing methanol, or gasoline containing more than 15% ethanol (E-15). Use of these blends may result in starting and drivability problems, damage critical fuel system components, cause emissions to exceed the applicable standard, and/or cause the Malfunction Indicator Light to illuminate. Please observe pump labels as they should clearly communicate if a fuel contains greater than 15% ethanol (E-15). Fuel System Cautions CAUTION: Follow these guidelines to maintain your vehicle’s performance: The use of leaded gasoline is prohibited by Federal law. Using leaded gasoline can impair engine performance and damage the emissions control system. An out-of-tune engine, certain fuel or ignition malfunctions can cause the catalytic converter to overheat. If you notice a pungent burning odor or some light smoke, your engine may be out-of-tune or malfunctioning and may require immediate service. Contact an authorized dealer for service assistance. The use of fuel additives, which are now being sold as octane enhancers, is not recommended. Most of these products contain high concentrations of methanol. Fuel system damage or vehicle performance problems resulting from the use of such fuels or additives is not the responsibility of The manufacturer and may void or not be covered under the New Vehicle Limited Warranty. Note: Intentional tampering with the emissions control system can result in civil penalties being assessed against you. Methylcyclopentadienyl Manganese Tricarbonyl (MMT) In Gasoline MMT is a manganese-containing metallic additive that is blended into some gasolines to increase octane. Gasoline blended with MMT provides no performance advantage beyond gasoline of the same octane number without MMT. Gasoline blended with MMT reduces spark plug life and reduces emissions system performance in some vehicles. The manufacturer recommends that gasoline without MMT be used in your vehicle. The MMT content of gasoline may not be indicated on the gasoline pump; therefore, you should ask your gasoline retailer whether the gasoline contains MMT. MMT is prohibited in Federal law and California reformulated gasoline.
Answer to user's question:
|
dev_26
|
Ensemble Retriever
|
What is the appropriate rim size for the tire size listed?
|
Rim Size This is the rim size that is appropriate for the tire size listed. Tire Size The tire size on the Vehicle Certification Label represents the actual tire size on your vehicle. Replacement tires must be equal to the load capacity of this tire size. Example: example size designation: p215/65r15xl 95h, 215/65r15 96h, lt235/85r16c, t145/80d18 103m, 31x10.5 r15 lt p = passenger car tire size based on us design standards, or "....blank...." = passenger car tire based on european design standards, or lt = light truck tire based on us design standards, or t or s = temporary spare tire, or 31 = overall diameter in inches (in) 215, 235, 145 = section width in millimeters (mm) 65, 85, 80 = aspect ratio in percent (%) ratio of section height to section width of tire, or 10.5 = section width in inches (in) r = construction code "r" means radial construction, or "d" means diagonal or bias construction 15, 16, 18 = rim diameter in inches (in) service description: 95 = load index a numerical code associated with the maximum load a tire can carry h = speed symbol a symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions the maximum speed corresponding to the speed symbol should only be achieved under specified operating conditions (i.e., tire pressure, vehicle loading, road conditions, and posted speed limits) load identification: absence of the following load identification symbols on the sidewall of the tire indicates a standard load (sl) tire: xl = extra load (or reinforced) tire, or ll = light load tire or c, d, e, f, g = load range associated with the maximum load a tire can carry at a specified pressure maximum load – maximum load indicates the maximum load this tire is designed to carry maximum pressure – maximum pressure indicates the maximum permissible cold tire inflation pressure for this tire.
|
The appropriate rim size for the tire size listed depends on the specific tire size mentioned. The rim diameter is indicated at the end of the tire size designation, such as 15, 16, or 18 inches. Therefore, you would need to refer to the specific tire size listed to determine the appropriate rim size.
|
['R1: The appropriate rim size for the tire size listed depends on the specific tire size mentioned.', 'R2: The rim diameter is indicated at the end of the tire size designation, such as 15, 16, or 18 inches.', 'R3: Therefore, you would need to refer to the specific tire size listed to determine the appropriate rim size.']
|
{'R1': 'Supported', 'R2': 'Supported', 'R3': 'Supported'}
|
No
| false
| 1
|
You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
What is the appropriate rim size for the tire size listed?
Manual information:
Rim Size This is the rim size that is appropriate for the tire size listed. Tire Size The tire size on the Vehicle Certification Label represents the actual tire size on your vehicle. Replacement tires must be equal to the load capacity of this tire size. Example: example size designation: p215/65r15xl 95h, 215/65r15 96h, lt235/85r16c, t145/80d18 103m, 31x10.5 r15 lt p = passenger car tire size based on us design standards, or "....blank...." = passenger car tire based on european design standards, or lt = light truck tire based on us design standards, or t or s = temporary spare tire, or 31 = overall diameter in inches (in) 215, 235, 145 = section width in millimeters (mm) 65, 85, 80 = aspect ratio in percent (%) ratio of section height to section width of tire, or 10.5 = section width in inches (in) r = construction code "r" means radial construction, or "d" means diagonal or bias construction 15, 16, 18 = rim diameter in inches (in) service description: 95 = load index a numerical code associated with the maximum load a tire can carry h = speed symbol a symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions the maximum speed corresponding to the speed symbol should only be achieved under specified operating conditions (i.e., tire pressure, vehicle loading, road conditions, and posted speed limits) load identification: absence of the following load identification symbols on the sidewall of the tire indicates a standard load (sl) tire: xl = extra load (or reinforced) tire, or ll = light load tire or c, d, e, f, g = load range associated with the maximum load a tire can carry at a specified pressure maximum load – maximum load indicates the maximum load this tire is designed to carry maximum pressure – maximum pressure indicates the maximum permissible cold tire inflation pressure for this tire.
Answer to user's question:
|
dev_27
|
Adaptive Ensemble Search
|
What is the appropriate rim size for the tire size listed?
|
This is the rim size that is appropriate for the tire size listed. P (Passenger) — Metric tire sizing is based on US design standards. P-Metric tires have the letter “P” molded into the sidewall preceding the size designation. Example: P215/65R15 95H. European — Metric tire sizing is based on European design standards. Tires designed to this standard have the tire size molded into the sidewall beginning with the section width. The letter “P” is absent from this tire size designation. Example: 215/65R15 96H. LT (Light Truck) — Metric tire sizing is based on US design standards. The size designation for LT-Metric tires is the same as for P-Metric tires except for the letters “LT” that are molded into the sidewall preceding the size designation. Example: LT235/85R16. Temporary spare tires are designed for temporary emergency use only. Temporary high pressure compact spare tires have the letter “T” or “S” molded into the sidewall preceding the size designation. Example: T145/80D18 103M. High flotation tire sizing is based on US design standards and it begins with the tire diameter molded into the sidewall. Example: 31x10.5 R15 LT. The tire size on the Vehicle Certification Label represents the actual tire size on your vehicle. Replacement tires must be equal to the load capacity of this tire size.
|
The appropriate rim size for the tire size listed depends on the specific tire size designation. Here are the rim sizes that are appropriate for each tire size: - For P-Metric tires (e.g. P215/65R15 95H), the appropriate rim size is 15 inches. - For European-Metric tires (e.g. 215/65R15 96H), the appropriate rim size is 15 inches. - For LT-Metric tires (e.g. LT235/85R16), the appropriate rim size is 16 inches. - For temporary high pressure compact spare tires (e.g. T145/80D18 103M), the appropriate rim size is 18 inches. - For high flotation tires (e.g. 31x10.5 R15 LT), the appropriate rim size is 15 inches. It's important to note that the tire size on the Vehicle Certification Label represents the actual tire size on your vehicle, and replacement tires must be equal to the load capacity of this tire size.
|
['R1: The appropriate rim size for the tire size listed depends on the specific tire size designation.', 'R2: Here are the rim sizes that are appropriate for each tire size: - For P-Metric tires (e.g.', 'R3: P215/65R15 95H), the appropriate rim size is 15 inches.', 'R4: - For European-Metric tires (e.g.', 'R5: 215/65R15 96H), the appropriate rim size is 15 inches.', 'R6: - For LT-Metric tires (e.g.', 'R7: LT235/85R16), the appropriate rim size is 16 inches.', 'R8: - For temporary high pressure compact spare tires (e.g.', 'R9: T145/80D18 103M), the appropriate rim size is 18 inches.', 'R10: - For high flotation tires (e.g.', 'R11: 31x10.5 R15 LT), the appropriate rim size is 15 inches.', "R12: It's important to note that the tire size on the Vehicle Certification Label represents the actual tire size on your vehicle, and replacement tires must be equal to the load capacity of this tire size."]
|
{'R1': 'Supported', 'R2': 'Supported', 'R3': 'Supported', 'R4': 'Supported', 'R5': 'Supported', 'R6': 'Supported', 'R7': 'Supported', 'R8': 'Supported', 'R9': 'Supported', 'R10': 'Supported', 'R11': 'Supported', 'R12': 'Supported'}
|
No
| false
| 1
|
You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
What is the appropriate rim size for the tire size listed?
Manual information:
This is the rim size that is appropriate for the tire size listed. P (Passenger) — Metric tire sizing is based on US design standards. P-Metric tires have the letter “P” molded into the sidewall preceding the size designation. Example: P215/65R15 95H. European — Metric tire sizing is based on European design standards. Tires designed to this standard have the tire size molded into the sidewall beginning with the section width. The letter “P” is absent from this tire size designation. Example: 215/65R15 96H. LT (Light Truck) — Metric tire sizing is based on US design standards. The size designation for LT-Metric tires is the same as for P-Metric tires except for the letters “LT” that are molded into the sidewall preceding the size designation. Example: LT235/85R16. Temporary spare tires are designed for temporary emergency use only. Temporary high pressure compact spare tires have the letter “T” or “S” molded into the sidewall preceding the size designation. Example: T145/80D18 103M. High flotation tire sizing is based on US design standards and it begins with the tire diameter molded into the sidewall. Example: 31x10.5 R15 LT. The tire size on the Vehicle Certification Label represents the actual tire size on your vehicle. Replacement tires must be equal to the load capacity of this tire size.
Answer to user's question:
|
dev_28
|
Ensemble Retriever (Base)
|
How to read the speedometer?
|
Speedometer push and release the up or down arrow button until the speedometer menu icon is displayed in the instrument cluster display. Push and release the ok button to toggle between mph and km/h.
|
To read the speedometer, you need to push and release the up or down arrow button until the speedometer menu icon is displayed in the instrument cluster display. Then, push and release the OK button to toggle between mph and km/h. The speedometer will display your current speed in either miles per hour or kilometers per hour, depending on your preference.
|
['R1: To read the speedometer, you need to push and release the up or down arrow button until the speedometer menu icon is displayed in the instrument cluster display.', 'R2: Then, push and release the OK button to toggle between mph and km/h.', 'R3: The speedometer will display your current speed in either miles per hour or kilometers per hour, depending on your preference.']
|
{'R1': 'Supported', 'R2': 'Supported', 'R3': 'Supported'}
|
No
| false
| 1
|
You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
How to read the speedometer?
Manual information:
Speedometer push and release the up or down arrow button until the speedometer menu icon is displayed in the instrument cluster display. Push and release the ok button to toggle between mph and km/h.
Answer to user's question:
|
dev_29
|
Adaptive Ensemble Search
|
How to read the speedometer?
|
Speedometer push and release the up or down arrow button until the speedometer menu icon is displayed in the instrument cluster display. Push and release the ok button to toggle between mph and km/h.
|
To read the speedometer, follow these steps: 1. Push and release the up or down arrow button until the speedometer menu icon is displayed in the instrument cluster display. 2. Once the speedometer menu icon is displayed, push and release the OK button to toggle between mph and km/h. 3. The speedometer will display the vehicle's speed in either miles per hour (mph) or kilometers per hour (km/h), depending on the unit of measurement selected in step 2.
|
['R1: To read the speedometer, follow these steps: 1.', 'R2: Push and release the up or down arrow button until the speedometer menu icon is displayed in the instrument cluster display.', 'R3: 2. Once the speedometer menu icon is displayed, push and release the OK button to toggle between mph and km/h.', "R4: 3. The speedometer will display the vehicle's speed in either miles per hour (mph) or kilometers per hour (km/h), depending on the unit of measurement selected in step 2."]
|
{'R1': 'Neither', 'R2': 'Supported', 'R3': 'Supported', 'R4': 'Supported'}
|
No
| false
| 1
|
You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
How to read the speedometer?
Manual information:
Speedometer push and release the up or down arrow button until the speedometer menu icon is displayed in the instrument cluster display. Push and release the ok button to toggle between mph and km/h.
Answer to user's question:
|
dev_30
|
Ensemble Retriever
|
How to read the speedometer?
|
Instrument cluster descriptions tachometer indicates the engine speed in revolutions per minute (rpm x 1000). Caution: do not operate the engine with the tachometer pointer in the red area. Engine damage will occur. Temperature gauge the temperature gauge shows engine coolant temperature. Any reading within the normal range indicates that the engine cooling system is operating satisfactorily. The gauge pointer will likely indicate a higher temperature when driving in hot weather, up mountain grades, or when towing a trailer. It should not be allowed to exceed the upper limits of the normal operating range. Warning: a hot engine cooling system is dangerous. You or others could be badly burned by steam or boiling coolant. It is recommended that you call an authorized dealer for service if your vehicle overheats. Caution: driving with a hot engine cooling system could damage your vehicle. If the temperature gauge reads “H” pull over and stop the vehicle. Idle the vehicle with the air conditioner turned off until the pointer drops back into the normal range. If the pointer remains on the “H”, turn the engine off immediately and call an authorized dealer for service. Instrument cluster display the instrument cluster display features a driver interactive display. Fuel gauge the pointer shows the level of fuel in the fuel tank when the ignition switch is in the on/run position. The fuel pump symbol points to the side of the vehicle where the fuel filler door is located Speedometer indicates vehicle speed. Speedometer push and release the up or down arrow button until the speedometer menu icon is displayed in the instrument cluster display. Push and release the ok button to toggle between mph and km/h. Favorite menus speedometer vehicle info off road — if equipped (show/hide) driver assist — if equipped (show/hide) fuel economy (show/hide) trip info (show/hide) stop / start — if equipped audio (show/hide) messages screen setup vehicle settings — if equipped.
|
The speedometer indicates the vehicle speed. To toggle between mph and km/h, push and release the up or down arrow button until the speedometer menu icon is displayed in the instrument cluster display. Then, push and release the OK button to switch between the two units of measurement.
|
['R1: The speedometer indicates the vehicle speed.', 'R2: To toggle between mph and km/h, push and release the up or down arrow button until the speedometer menu icon is displayed in the instrument cluster display.', 'R3: Then, push and release the OK button to switch between the two units of measurement.']
|
{'R1': 'Supported', 'R2': 'Supported', 'R3': 'Supported'}
|
No
| false
| 1
|
You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
How to read the speedometer?
Manual information:
Instrument cluster descriptions tachometer indicates the engine speed in revolutions per minute (rpm x 1000). Caution: do not operate the engine with the tachometer pointer in the red area. Engine damage will occur. Temperature gauge the temperature gauge shows engine coolant temperature. Any reading within the normal range indicates that the engine cooling system is operating satisfactorily. The gauge pointer will likely indicate a higher temperature when driving in hot weather, up mountain grades, or when towing a trailer. It should not be allowed to exceed the upper limits of the normal operating range. Warning: a hot engine cooling system is dangerous. You or others could be badly burned by steam or boiling coolant. It is recommended that you call an authorized dealer for service if your vehicle overheats. Caution: driving with a hot engine cooling system could damage your vehicle. If the temperature gauge reads “H” pull over and stop the vehicle. Idle the vehicle with the air conditioner turned off until the pointer drops back into the normal range. If the pointer remains on the “H”, turn the engine off immediately and call an authorized dealer for service. Instrument cluster display the instrument cluster display features a driver interactive display. Fuel gauge the pointer shows the level of fuel in the fuel tank when the ignition switch is in the on/run position. The fuel pump symbol points to the side of the vehicle where the fuel filler door is located Speedometer indicates vehicle speed. Speedometer push and release the up or down arrow button until the speedometer menu icon is displayed in the instrument cluster display. Push and release the ok button to toggle between mph and km/h. Favorite menus speedometer vehicle info off road — if equipped (show/hide) driver assist — if equipped (show/hide) fuel economy (show/hide) trip info (show/hide) stop / start — if equipped audio (show/hide) messages screen setup vehicle settings — if equipped.
Answer to user's question:
|
dev_32
|
Lucene Search
|
How to erase old channels from HomeLink?
|
Erasing All The HomeLink® Channels To erase the channels, follow this procedure: Place the ignition switch into the ON/RUN position. Push and hold the two outside HomeLink® buttons (I and III) for up to 20 seconds, or until the HomeLink® indicator light flashes. Note: Erasing all channels should only be performed when programming HomeLink® for the first time. Do not erase channels when programming additional buttons.
|
To erase old channels from HomeLink, you need to follow these steps: 1. Place the ignition switch into the ON/RUN position. 2. Push and hold the two outside HomeLink® buttons (I and III) for up to 20 seconds, or until the HomeLink® indicator light flashes. Note: Erasing all channels should only be performed when programming HomeLink® for the first time. Do not erase channels when programming additional buttons.
|
['R1: To erase old channels from HomeLink, you need to follow these steps: 1.', 'R2: Place the ignition switch into the ON/RUN position.', 'R3: 2. Push and hold the two outside HomeLink® buttons (I and III) for up to 20 seconds, or until the HomeLink® indicator light flashes.', 'R4: Note: Erasing all channels should only be performed when programming HomeLink® for the first time.', 'R5: Do not erase channels when programming additional buttons.']
|
{'R1': 'Supported', 'R2': 'Supported', 'R3': 'Supported', 'R4': 'Supported', 'R5': 'Supported'}
|
No
| false
| 1
|
You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
How to erase old channels from HomeLink?
Manual information:
Erasing All The HomeLink® Channels To erase the channels, follow this procedure: Place the ignition switch into the ON/RUN position. Push and hold the two outside HomeLink® buttons (I and III) for up to 20 seconds, or until the HomeLink® indicator light flashes. Note: Erasing all channels should only be performed when programming HomeLink® for the first time. Do not erase channels when programming additional buttons.
Answer to user's question:
|
dev_33
|
Ensemble Retriever (Base)
|
How to erase old channels from HomeLink?
|
Erasing All The HomeLink® Channels To erase the channels, follow this procedure: Place the ignition switch into the ON/RUN position. Push and hold the two outside HomeLink® buttons (I and III) for up to 20 seconds, or until the HomeLink® indicator light flashes. Note: Erasing all channels should only be performed when programming HomeLink® for the first time. Do not erase channels when programming additional buttons.
|
To erase old channels from HomeLink, you need to place the ignition switch into the ON/RUN position and then push and hold the two outside HomeLink® buttons (I and III) for up to 20 seconds, or until the HomeLink® indicator light flashes.
|
['R1: To erase old channels from HomeLink, you need to place the ignition switch into the ON/RUN position and then push and hold the two outside HomeLink® buttons (I and III) for up to 20 seconds, or until the HomeLink® indicator light flashes.']
|
{'R1': 'Supported'}
|
No
| false
| 1
|
You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
How to erase old channels from HomeLink?
Manual information:
Erasing All The HomeLink® Channels To erase the channels, follow this procedure: Place the ignition switch into the ON/RUN position. Push and hold the two outside HomeLink® buttons (I and III) for up to 20 seconds, or until the HomeLink® indicator light flashes. Note: Erasing all channels should only be performed when programming HomeLink® for the first time. Do not erase channels when programming additional buttons.
Answer to user's question:
|
dev_35
|
Ensemble Retriever (Base)
|
What is the ASSIST call used for?
|
ASSIST Call The ASSIST button is used to automatically connect you to any one of the following support centers: Roadside Assistance – If you get a flat tire, or need a tow, just push the ASSIST button and you’ll be connected to someone who can help. Roadside Assistance will know what vehicle you’re driving and its location. Additional fees may apply for roadside assistance. SiriusXM Guardian™ Customer Care – In-vehicle support for SiriusXM Guardian™. Vehicle Customer Care – Total support for all other vehicle issues. Uconnect Customer Care - Total support for Radio, Phone and NAV issues.
|
The ASSIST call button is used to automatically connect you to support centers such as Roadside Assistance, SiriusXM Guardian™ Customer Care, Vehicle Customer Care, and Uconnect Customer Care for various vehicle-related issues.
|
['R1: The ASSIST call button is used to automatically connect you to support centers such as Roadside Assistance, SiriusXM Guardian™ Customer Care, Vehicle Customer Care, and Uconnect Customer Care for various vehicle-related issues.']
|
{'R1': 'Supported'}
|
No
| false
| 1
|
You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
What is the ASSIST call used for?
Manual information:
ASSIST Call The ASSIST button is used to automatically connect you to any one of the following support centers: Roadside Assistance – If you get a flat tire, or need a tow, just push the ASSIST button and you’ll be connected to someone who can help. Roadside Assistance will know what vehicle you’re driving and its location. Additional fees may apply for roadside assistance. SiriusXM Guardian™ Customer Care – In-vehicle support for SiriusXM Guardian™. Vehicle Customer Care – Total support for all other vehicle issues. Uconnect Customer Care - Total support for Radio, Phone and NAV issues.
Answer to user's question:
|
dev_36
|
Ensemble Retriever
|
What is the ASSIST call used for?
|
ASSIST Call The ASSIST button is used to automatically connect you to any one of the following support centers: Roadside Assistance – If you get a flat tire, or need a tow, just push the ASSIST button and you’ll be connected to someone who can help. Roadside Assistance will know what vehicle you’re driving and its location. Additional fees may apply for roadside assistance. SiriusXM Guardian™ Customer Care – In-vehicle support for SiriusXM Guardian™. Vehicle Customer Care – Total support for all other vehicle issues. Uconnect Customer Care - Total support for Radio, Phone and NAV issues. The ASSIST and SOS Call Buttons On Your Rearview Mirror Or Overhead Console If equipped, the ASSIST Button is used for contacting Roadside Assistance, Vehicle Care, Uconnect Care, and SiriusXM Guardian™ Customer Care. The SOS Call button connects you directly to SiriusXM Guardian™ Customer Care for assistance in an emergency. SOS Call — If Equipped WARNING: Some SiriusXM Guardian™ connected services, including SOS Call and Roadside Assistance Call, will NOT work without a network connection compatible with your device.
|
The ASSIST call button is used to automatically connect you to support centers such as Roadside Assistance, SiriusXM Guardian™ Customer Care, Vehicle Customer Care, and Uconnect Customer Care. It can be used for issues related to radio, phone, navigation, and other vehicle issues. Additionally, it can be used to contact Roadside Assistance in case of a flat tire or if you need a tow.
|
['R1: The ASSIST call button is used to automatically connect you to support centers such as Roadside Assistance, SiriusXM Guardian™ Customer Care, Vehicle Customer Care, and Uconnect Customer Care.', 'R2: It can be used for issues related to radio, phone, navigation, and other vehicle issues.', 'R3: Additionally, it can be used to contact Roadside Assistance in case of a flat tire or if you need a tow.']
|
{'R1': 'Supported', 'R2': 'Supported', 'R3': 'Supported'}
|
No
| false
| 1
|
You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
What is the ASSIST call used for?
Manual information:
ASSIST Call The ASSIST button is used to automatically connect you to any one of the following support centers: Roadside Assistance – If you get a flat tire, or need a tow, just push the ASSIST button and you’ll be connected to someone who can help. Roadside Assistance will know what vehicle you’re driving and its location. Additional fees may apply for roadside assistance. SiriusXM Guardian™ Customer Care – In-vehicle support for SiriusXM Guardian™. Vehicle Customer Care – Total support for all other vehicle issues. Uconnect Customer Care - Total support for Radio, Phone and NAV issues. The ASSIST and SOS Call Buttons On Your Rearview Mirror Or Overhead Console If equipped, the ASSIST Button is used for contacting Roadside Assistance, Vehicle Care, Uconnect Care, and SiriusXM Guardian™ Customer Care. The SOS Call button connects you directly to SiriusXM Guardian™ Customer Care for assistance in an emergency. SOS Call — If Equipped WARNING: Some SiriusXM Guardian™ connected services, including SOS Call and Roadside Assistance Call, will NOT work without a network connection compatible with your device.
Answer to user's question:
|
dev_37
|
Adaptive Ensemble Search
|
If it possible to get hands burned when using the steering wheel heater?
|
Persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury, medication, alcohol use, exhaustion, or other physical conditions must exercise care when using the steering wheel heater. It may cause burns even at low temperatures, especially if used for long periods. Do not place anything on the steering wheel that insulates against heat, such as a blanket or steering wheel covers of any type and material. This may cause the steering wheel heater to overheat. The steering wheel contains a heating element that helps warm your hands in cold weather. The heated steering wheel has only one temperature setting. Once the heated steering wheel has been turned on, it will stay on until the operator turns it off. The heated steering wheel may not turn on when it is already warm. Persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury, medication, alcohol use, exhaustion or other physical condition must exercise care when using the seat heater. It may cause burns even at low temperatures, especially if used for long periods of time. Do not place anything on the seat or seatback that insulates against heat, such as a blanket or cushion. This may cause the seat heater to overheat. Sitting in a seat that has been overheated could cause serious burns due to the increased surface temperature of the seat. The heated steering wheel button is located on the center of the instrument panel below the radio screen, and within the Climate or Controls screen of the touchscreen. Press the heated steering wheel button once to turn the heating element on. Press the heated steering wheel button a second time to turn the heating element off. The engine must be running for the heated steering wheel to operate. Setting Name Description Auto-On Driver Heated/Ventilated Seat & Heated Steering Wheel With Vehicle Start This setting will activate the vehicle’s comfort system and heated seats or heated steering wheel when the vehicle is remote started or ignition is started. The “Off” setting will not activate the comfort systems. The “Remote Start” setting will only activate the comfort systems when using Remote Start. The “All Start” setting will activate the comfort systems whenever the vehicle is started. When Remote Start is activated, the front and rear defrost will automatically turn on in cold weather. The heated steering wheel and driver heated seat feature will also turn on if programmed in the Comfort menu screen within Uconnect Settings The heated seat control buttons are located on the center instrument panel below the touchscreen and also in the Climate Control touchscreen menu. If the “POWER STEERING HOT” message and an icon are displayed on the instrument cluster screen, it indicates that extreme steering maneuvers may have occurred, which caused an over temperature condition in the power steering system. You will lose power steering assistance momentarily until the over temperature condition no longer exists. Once driving conditions are safe, pull over and let vehicle idle for a few moments until the light turns off
|
Yes, it is possible to get burned when using the steering wheel heater, especially if it is used for long periods of time. This is particularly true for persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury, medication, alcohol use, exhaustion, or other physical conditions. It is important to exercise care when using the steering wheel heater and not to place anything on the steering wheel that insulates against heat, such as a blanket or steering wheel covers of any type and material, as this may cause the steering wheel heater to overheat.
|
['R1: Yes, it is possible to get burned when using the steering wheel heater, especially if it is used for long periods of time.', 'R2: This is particularly true for persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury, medication, alcohol use, exhaustion, or other physical conditions.', 'R3: It is important to exercise care when using the steering wheel heater and not to place anything on the steering wheel that insulates against heat, such as a blanket or steering wheel covers of any type and material, as this may cause the steering wheel heater to overheat.']
|
{'R1': 'Supported', 'R2': 'Supported', 'R3': 'Supported'}
|
No
| false
| 1
|
You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
If it possible to get hands burned when using the steering wheel heater?
Manual information:
Persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury, medication, alcohol use, exhaustion, or other physical conditions must exercise care when using the steering wheel heater. It may cause burns even at low temperatures, especially if used for long periods. Do not place anything on the steering wheel that insulates against heat, such as a blanket or steering wheel covers of any type and material. This may cause the steering wheel heater to overheat. The steering wheel contains a heating element that helps warm your hands in cold weather. The heated steering wheel has only one temperature setting. Once the heated steering wheel has been turned on, it will stay on until the operator turns it off. The heated steering wheel may not turn on when it is already warm. Persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury, medication, alcohol use, exhaustion or other physical condition must exercise care when using the seat heater. It may cause burns even at low temperatures, especially if used for long periods of time. Do not place anything on the seat or seatback that insulates against heat, such as a blanket or cushion. This may cause the seat heater to overheat. Sitting in a seat that has been overheated could cause serious burns due to the increased surface temperature of the seat. The heated steering wheel button is located on the center of the instrument panel below the radio screen, and within the Climate or Controls screen of the touchscreen. Press the heated steering wheel button once to turn the heating element on. Press the heated steering wheel button a second time to turn the heating element off. The engine must be running for the heated steering wheel to operate. Setting Name Description Auto-On Driver Heated/Ventilated Seat & Heated Steering Wheel With Vehicle Start This setting will activate the vehicle’s comfort system and heated seats or heated steering wheel when the vehicle is remote started or ignition is started. The “Off” setting will not activate the comfort systems. The “Remote Start” setting will only activate the comfort systems when using Remote Start. The “All Start” setting will activate the comfort systems whenever the vehicle is started. When Remote Start is activated, the front and rear defrost will automatically turn on in cold weather. The heated steering wheel and driver heated seat feature will also turn on if programmed in the Comfort menu screen within Uconnect Settings The heated seat control buttons are located on the center instrument panel below the touchscreen and also in the Climate Control touchscreen menu. If the “POWER STEERING HOT” message and an icon are displayed on the instrument cluster screen, it indicates that extreme steering maneuvers may have occurred, which caused an over temperature condition in the power steering system. You will lose power steering assistance momentarily until the over temperature condition no longer exists. Once driving conditions are safe, pull over and let vehicle idle for a few moments until the light turns off
Answer to user's question:
|
dev_38
|
Ensemble Retriever (Base)
|
If it possible to get hands burned when using the steering wheel heater?
|
Heated Steering Wheel — If Equipped The steering wheel contains a heating element that helps warm your hands in cold weather. The heated steering wheel has only one temperature setting. Once the heated steering wheel has been turned on, it will stay on until the operator turns it off. The heated steering wheel may not turn on when it is already warm. The heated steering wheel button is located on the center of the instrument panel below the radio screen, and within the Climate or Controls screen of the touchscreen. Press the heated steering wheel button once to turn the heating element on. Press the heated steering wheel button a second time to turn the heating element off. For information on use with the Remote Start system, see Note: The engine must be running for the heated steering wheel to operate. WARNING: Persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury, medication, alcohol use, exhaustion, or other physical conditions must exercise care when using the steering wheel heater. It may cause burns even at low temperatures, especially if used for long periods. Do not place anything on the steering wheel that insulates against heat, such as a blanket or steering wheel covers of any type and material. This may cause the steering wheel heater to overheat.
|
Yes, it is possible to get burned when using the steering wheel heater, especially if it is used for long periods. The warning in the context states that persons who are unable to feel pain to the skin must exercise care when using the steering wheel heater as it may cause burns even at low temperatures. It is also advised not to place anything on the steering wheel that insulates against heat, as this may cause the steering wheel heater to overheat.
|
['R1: Yes, it is possible to get burned when using the steering wheel heater, especially if it is used for long periods.', 'R2: The warning in the context states that persons who are unable to feel pain to the skin must exercise care when using the steering wheel heater as it may cause burns even at low temperatures.', 'R3: It is also advised not to place anything on the steering wheel that insulates against heat, as this may cause the steering wheel heater to overheat.']
|
{'R1': 'Supported', 'R2': 'Supported', 'R3': 'Supported'}
|
No
| false
| 1
|
You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
If it possible to get hands burned when using the steering wheel heater?
Manual information:
Heated Steering Wheel — If Equipped The steering wheel contains a heating element that helps warm your hands in cold weather. The heated steering wheel has only one temperature setting. Once the heated steering wheel has been turned on, it will stay on until the operator turns it off. The heated steering wheel may not turn on when it is already warm. The heated steering wheel button is located on the center of the instrument panel below the radio screen, and within the Climate or Controls screen of the touchscreen. Press the heated steering wheel button once to turn the heating element on. Press the heated steering wheel button a second time to turn the heating element off. For information on use with the Remote Start system, see Note: The engine must be running for the heated steering wheel to operate. WARNING: Persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury, medication, alcohol use, exhaustion, or other physical conditions must exercise care when using the steering wheel heater. It may cause burns even at low temperatures, especially if used for long periods. Do not place anything on the steering wheel that insulates against heat, such as a blanket or steering wheel covers of any type and material. This may cause the steering wheel heater to overheat.
Answer to user's question:
|
dev_39
|
Adaptive Ensemble Search
|
What should I pay attention to when putting cargo on top of the roof?
|
The Roof Luggage Rack is designed to allow for carrying an additional cargo load on vehicles equipped with a Hard Top. The load carried on the roof, when equipped with a luggage rack, must not exceed 100 lb (45 kg), this includes the weight of the crossbars, and it should be uniformly distributed over the cargo area. Crossbars should always be used whenever cargo is placed on the roof rack. Check the straps frequently to be sure that the load remains securely attached. Cargo must be securely tied down before driving your vehicle. Improperly secured loads can fly off the vehicle, particularly at high speeds, resulting in personal injury or property damage. Follow the roof rack cautions when carrying cargo on your roof rack.
|
When putting cargo on top of the roof, you should pay attention to the following: 1. The load carried on the roof, when equipped with a luggage rack, must not exceed 100 lb (45 kg), this includes the weight of the crossbars, and it should be uniformly distributed over the cargo area. 2. Crossbars should always be used whenever cargo is placed on the roof rack. 3. Check the straps frequently to be sure that the load remains securely attached. 4. Cargo must be securely tied down before driving your vehicle. 5. Improperly secured loads can fly off the vehicle, particularly at high speeds, resulting in personal injury or property damage. 6. Follow the roof rack cautions when carrying cargo on your roof rack.
|
['R1: When putting cargo on top of the roof, you should pay attention to the following: 1.', 'R2: The load carried on the roof, when equipped with a luggage rack, must not exceed 100 lb (45 kg), this includes the weight of the crossbars, and it should be uniformly distributed over the cargo area.', 'R3: 2. Crossbars should always be used whenever cargo is placed on the roof rack.', 'R4: 3. Check the straps frequently to be sure that the load remains securely attached.', 'R5: 4. Cargo must be securely tied down before driving your vehicle.', 'R6: 5. Improperly secured loads can fly off the vehicle, particularly at high speeds, resulting in personal injury or property damage.', 'R7: 6. Follow the roof rack cautions when carrying cargo on your roof rack.']
|
{'R1': 'Supported', 'R2': 'Supported', 'R3': 'Supported', 'R4': 'Supported', 'R5': 'Supported', 'R6': 'Supported', 'R7': 'Supported'}
|
No
| false
| 1
|
You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
What should I pay attention to when putting cargo on top of the roof?
Manual information:
The Roof Luggage Rack is designed to allow for carrying an additional cargo load on vehicles equipped with a Hard Top. The load carried on the roof, when equipped with a luggage rack, must not exceed 100 lb (45 kg), this includes the weight of the crossbars, and it should be uniformly distributed over the cargo area. Crossbars should always be used whenever cargo is placed on the roof rack. Check the straps frequently to be sure that the load remains securely attached. Cargo must be securely tied down before driving your vehicle. Improperly secured loads can fly off the vehicle, particularly at high speeds, resulting in personal injury or property damage. Follow the roof rack cautions when carrying cargo on your roof rack.
Answer to user's question:
|
dev_40
|
Ensemble Retriever (Base)
|
What should I pay attention to when putting cargo on top of the roof?
|
ROOF LUGGAGE RACK — IF EQUIPPED The Roof Luggage Rack is designed to allow for carrying an additional cargo load on vehicles equipped with a Hard Top. The load carried on the roof, when equipped with a luggage rack, must not exceed 100 lb (45 kg), this includes the weight of the crossbars, and it should be uniformly distributed over the cargo area. Crossbars should always be used whenever cargo is placed on the roof rack. Check the straps frequently to be sure that the load remains securely attached. External racks do not increase the total load carrying capacity of the vehicle. Be sure that the total occupant and luggage load inside the vehicle, plus the load on the luggage rack, does not exceed the maximum vehicle load capacity. Note: roof rack applications are for hard top models only. Note: Crossbars can be purchased at an authorized dealer through Mopar® parts. WARNING: Cargo must be securely tied down before driving your vehicle. Improperly secured loads can fly off the vehicle, particularly at high speeds, resulting in personal injury or property damage. Follow the roof rack cautions when carrying cargo on your roof rack. CAUTION: To avoid damage to the roof rack and vehicle, do not exceed the maximum roof rack load capacity. Always distribute heavy loads as evenly as possible and secure the load appropriately. Long loads, which extend over the windshield, should be secured to both the front and rear of the vehicle. Place a blanket or other protection between the surface of the roof and the load. Travel at reduced speeds and turn corners carefully when carrying large or heavy loads on the roof rack. Wind forces, due to natural causes or nearby truck traffic, can add sudden upward lift. It is recommended to not carry large flat loads, such as wood panels or surfboards, which may result in damage to the cargo or your vehicle. Load should always be secured to crossbars first, with tie down loops used as additional securing points if needed. Tie loops are intended as supplementary tie down points only. Do not use ratcheting mechanisms with the tie loops. Check the straps frequently to be sure that the load remains securely attached.
|
When putting cargo on top of the roof, you should pay attention to the following: 1. The load carried on the roof, when equipped with a luggage rack, must not exceed 100 lb (45 kg), this includes the weight of the crossbars, and it should be uniformly distributed over the cargo area. 2. Crossbars should always be used whenever cargo is placed on the roof rack. 3. Check the straps frequently to be sure that the load remains securely attached. 4. Cargo must be securely tied down before driving your vehicle. 5. To avoid damage to the roof rack and vehicle, do not exceed the maximum roof rack load capacity. 6. Always distribute heavy loads as evenly as possible and secure the load appropriately. 7. Long loads, which extend over the windshield, should be secured to both the front and rear of the vehicle. 8. Place a blanket or other protection between the surface of the roof and the load. 9. Travel at reduced speeds and turn corners carefully when carrying large or heavy loads on the roof rack. 10. Load should always be secured to crossbars first, with tie down loops used as additional securing points if needed.
|
['R1: When putting cargo on top of the roof, you should pay attention to the following: 1.', 'R2: The load carried on the roof, when equipped with a luggage rack, must not exceed 100 lb (45 kg), this includes the weight of the crossbars, and it should be uniformly distributed over the cargo area.', 'R3: 2. Crossbars should always be used whenever cargo is placed on the roof rack.', 'R4: 3. Check the straps frequently to be sure that the load remains securely attached.', 'R5: 4. Cargo must be securely tied down before driving your vehicle.', 'R6: 5. To avoid damage to the roof rack and vehicle, do not exceed the maximum roof rack load capacity.', 'R7: 6. Always distribute heavy loads as evenly as possible and secure the load appropriately.', 'R8: 7. Long loads, which extend over the windshield, should be secured to both the front and rear of the vehicle.', 'R9: 8. Place a blanket or other protection between the surface of the roof and the load.', 'R10: 9. Travel at reduced speeds and turn corners carefully when carrying large or heavy loads on the roof rack.', 'R11: 10. Load should always be secured to crossbars first, with tie down loops used as additional securing points if needed.']
|
{'R1': 'Supported', 'R2': 'Supported', 'R3': 'Neither', 'R4': 'Supported', 'R5': 'Supported', 'R6': 'Supported', 'R7': 'Supported', 'R8': 'Supported', 'R9': 'Supported', 'R10': 'Supported', 'R11': 'Supported'}
|
No
| false
| 1
|
You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
What should I pay attention to when putting cargo on top of the roof?
Manual information:
ROOF LUGGAGE RACK — IF EQUIPPED The Roof Luggage Rack is designed to allow for carrying an additional cargo load on vehicles equipped with a Hard Top. The load carried on the roof, when equipped with a luggage rack, must not exceed 100 lb (45 kg), this includes the weight of the crossbars, and it should be uniformly distributed over the cargo area. Crossbars should always be used whenever cargo is placed on the roof rack. Check the straps frequently to be sure that the load remains securely attached. External racks do not increase the total load carrying capacity of the vehicle. Be sure that the total occupant and luggage load inside the vehicle, plus the load on the luggage rack, does not exceed the maximum vehicle load capacity. Note: roof rack applications are for hard top models only. Note: Crossbars can be purchased at an authorized dealer through Mopar® parts. WARNING: Cargo must be securely tied down before driving your vehicle. Improperly secured loads can fly off the vehicle, particularly at high speeds, resulting in personal injury or property damage. Follow the roof rack cautions when carrying cargo on your roof rack. CAUTION: To avoid damage to the roof rack and vehicle, do not exceed the maximum roof rack load capacity. Always distribute heavy loads as evenly as possible and secure the load appropriately. Long loads, which extend over the windshield, should be secured to both the front and rear of the vehicle. Place a blanket or other protection between the surface of the roof and the load. Travel at reduced speeds and turn corners carefully when carrying large or heavy loads on the roof rack. Wind forces, due to natural causes or nearby truck traffic, can add sudden upward lift. It is recommended to not carry large flat loads, such as wood panels or surfboards, which may result in damage to the cargo or your vehicle. Load should always be secured to crossbars first, with tie down loops used as additional securing points if needed. Tie loops are intended as supplementary tie down points only. Do not use ratcheting mechanisms with the tie loops. Check the straps frequently to be sure that the load remains securely attached.
Answer to user's question:
|
dev_41
|
Lucene Search
|
Can the Privacy of wireless and wired communications be assured?
|
Connected Vehicles Privacy of any wireless and wired communications cannot be assured. Third parties may unlawfully intercept information and private communications without your consent. For further information, refer to “Data Collection & Privacy” in your Uconnect Radio Instruction Manual or “Onboard Diagnostic System (OBD II) Cybersecurity”WARNING: It is not possible to know or to predict all of the possible outcomes if your vehicle’s systems are breached. It may be possible that vehicle systems, including safety related systems, could be impaired or a loss of vehicle control could occur that may result in an accident involving serious injury or death.
|
No, the privacy of wireless and wired communications cannot be assured in connected vehicles. Third parties may unlawfully intercept information and private communications without your consent, which could potentially lead to serious consequences such as impaired vehicle systems or loss of vehicle control resulting in accidents involving serious injury or death. It is important to refer to the "Data Collection & Privacy" section in your Uconnect Radio Instruction Manual or "Onboard Diagnostic System (OBD II) Cybersecurity" for further information.
|
['R1: No, the privacy of wireless and wired communications cannot be assured in connected vehicles.', 'R2: Third parties may unlawfully intercept information and private communications without your consent, which could potentially lead to serious consequences such as impaired vehicle systems or loss of vehicle control resulting in accidents involving serious injury or death.', 'R3: It is important to refer to the "Data Collection & Privacy" section in your Uconnect Radio Instruction Manual or "Onboard Diagnostic System (OBD II) Cybersecurity" for further information.']
|
{'R1': 'Supported', 'R2': 'Supported', 'R3': 'Supported'}
|
No
| false
| 1
|
You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
Can the Privacy of wireless and wired communications be assured?
Manual information:
Connected Vehicles Privacy of any wireless and wired communications cannot be assured. Third parties may unlawfully intercept information and private communications without your consent. For further information, refer to “Data Collection & Privacy” in your Uconnect Radio Instruction Manual or “Onboard Diagnostic System (OBD II) Cybersecurity”WARNING: It is not possible to know or to predict all of the possible outcomes if your vehicle’s systems are breached. It may be possible that vehicle systems, including safety related systems, could be impaired or a loss of vehicle control could occur that may result in an accident involving serious injury or death.
Answer to user's question:
|
dev_42
|
Ensemble Retriever (Base)
|
Can the Privacy of wireless and wired communications be assured?
|
Connected Vehicles Privacy of any wireless and wired communications cannot be assured. Third parties may unlawfully intercept information and private communications without your consent. For further information, refer to “Data Collection & Privacy” in your Uconnect Radio Instruction Manual or “Onboard Diagnostic System (OBD II) Cybersecurity” WARNING: It is not possible to know or to predict all of the possible outcomes if your vehicle’s systems are breached. It may be possible that vehicle systems, including safety related systems, could be impaired or a loss of vehicle control could occur that may result in an accident involving serious injury or death.
|
No, the privacy of wireless and wired communications cannot be assured in connected vehicles. Third parties may unlawfully intercept information and private communications without your consent.
|
['R1: No, the privacy of wireless and wired communications cannot be assured in connected vehicles.', 'R2: Third parties may unlawfully intercept information and private communications without your consent.']
|
{'R1': 'Supported', 'R2': 'Supported'}
|
No
| false
| 1
|
You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
Can the Privacy of wireless and wired communications be assured?
Manual information:
Connected Vehicles Privacy of any wireless and wired communications cannot be assured. Third parties may unlawfully intercept information and private communications without your consent. For further information, refer to “Data Collection & Privacy” in your Uconnect Radio Instruction Manual or “Onboard Diagnostic System (OBD II) Cybersecurity” WARNING: It is not possible to know or to predict all of the possible outcomes if your vehicle’s systems are breached. It may be possible that vehicle systems, including safety related systems, could be impaired or a loss of vehicle control could occur that may result in an accident involving serious injury or death.
Answer to user's question:
|
dev_45
|
Adaptive Ensemble Search
|
What will happen if I remain in the vehicle but open a door?
|
When any of these situations occur, after all open doors are closed, the FOBIK-Safe search will be executed. If it detects a Passive Entry key fob inside the vehicle, the vehicle will unlock and alert the customer. If Passive Entry is disabled using the Uconnect system, the key fob protection described in this section remains active/functional. When a door is open and the interior lights are on, rotating the instrument panel dimmer control to the extreme bottom position will cause all the interior lights to turn off. This allows the doors to stay open for extended periods of time without discharging the vehicle’s battery. Be sure the hood is fully latched before driving your vehicle. If the hood is not fully latched, it could open when the vehicle is in motion and block your vision. Failure to follow this warning could result in serious injury or death. The doors have to be open and then closed in order for the vehicle to check for the presence of a key fob; the Key Left Vehicle feature will not activate until all of the doors are closed. These alerts will not be activated in situations where the vehicle’s engine is left running with the key fob inside.
|
If you remain in the vehicle but open a door, the interior lights will turn on. However, if you rotate the instrument panel dimmer control to the extreme bottom position, all the interior lights will turn off. This will allow you to keep the doors open for an extended period of time without discharging the vehicle's battery. However, please note that if the Key Left Vehicle feature is enabled, it will not activate until all the doors are closed. Additionally, if the FOBIK-Safe search is executed and detects a Passive Entry key fob inside the vehicle, the vehicle will unlock and alert the customer.
|
['R1: If you remain in the vehicle but open a door, the interior lights will turn on.', 'R2: However, if you rotate the instrument panel dimmer control to the extreme bottom position, all the interior lights will turn off.', "R3: This will allow you to keep the doors open for an extended period of time without discharging the vehicle's battery.", 'R4: However, please note that if the Key Left Vehicle feature is enabled, it will not activate until all the doors are closed.', 'R5: Additionally, if the FOBIK-Safe search is executed and detects a Passive Entry key fob inside the vehicle, the vehicle will unlock and alert the customer.']
|
{'R1': 'Supported', 'R2': 'Supported', 'R3': 'Supported', 'R4': 'Supported', 'R5': 'Supported'}
|
No
| false
| 1
|
You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
What will happen if I remain in the vehicle but open a door?
Manual information:
When any of these situations occur, after all open doors are closed, the FOBIK-Safe search will be executed. If it detects a Passive Entry key fob inside the vehicle, the vehicle will unlock and alert the customer. If Passive Entry is disabled using the Uconnect system, the key fob protection described in this section remains active/functional. When a door is open and the interior lights are on, rotating the instrument panel dimmer control to the extreme bottom position will cause all the interior lights to turn off. This allows the doors to stay open for extended periods of time without discharging the vehicle’s battery. Be sure the hood is fully latched before driving your vehicle. If the hood is not fully latched, it could open when the vehicle is in motion and block your vision. Failure to follow this warning could result in serious injury or death. The doors have to be open and then closed in order for the vehicle to check for the presence of a key fob; the Key Left Vehicle feature will not activate until all of the doors are closed. These alerts will not be activated in situations where the vehicle’s engine is left running with the key fob inside.
Answer to user's question:
|
dev_46
|
Lucene Search
|
What's the function of TSC?
|
Trailer Sway Control (TSC) TSC uses sensors in the vehicle to recognize an excessively swaying trailer and will take the appropriate actions to attempt to stop the sway. When TSC is functioning, the ESC Activation/Malfunction Indicator Light will flash, the engine power may be reduced, and you may feel the brakes being applied to individual wheels to attempt to stop the trailer from swaying. TSC is disabled when the ESC system is in the “Partial Off” or “Full Off” modes. Note: TSC cannot stop all trailers from swaying. Always use caution when towing a trailer and follow the trailer tongue weight recommendations. See "⇨trailer towing" for further information. WARNING: If TSC activates while driving, slow the vehicle down, stop at the nearest safe location, and adjust the trailer load to eliminate trailer sway.
|
The function of Trailer Sway Control (TSC) is to recognize an excessively swaying trailer and take appropriate actions to attempt to stop the sway. When TSC is functioning, the ESC Activation/Malfunction Indicator Light will flash, the engine power may be reduced, and the brakes may be applied to individual wheels to attempt to stop the trailer from swaying. However, it's important to note that TSC cannot stop all trailers from swaying, and caution should always be used when towing a trailer.
|
['R1: The function of Trailer Sway Control (TSC) is to recognize an excessively swaying trailer and take appropriate actions to attempt to stop the sway.', 'R2: When TSC is functioning, the ESC Activation/Malfunction Indicator Light will flash, the engine power may be reduced, and the brakes may be applied to individual wheels to attempt to stop the trailer from swaying.', "R3: However, it's important to note that TSC cannot stop all trailers from swaying, and caution should always be used when towing a trailer."]
|
{'R1': 'Supported', 'R2': 'Supported', 'R3': 'Supported'}
|
No
| false
| 1
|
You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
What's the function of TSC?
Manual information:
Trailer Sway Control (TSC) TSC uses sensors in the vehicle to recognize an excessively swaying trailer and will take the appropriate actions to attempt to stop the sway. When TSC is functioning, the ESC Activation/Malfunction Indicator Light will flash, the engine power may be reduced, and you may feel the brakes being applied to individual wheels to attempt to stop the trailer from swaying. TSC is disabled when the ESC system is in the “Partial Off” or “Full Off” modes. Note: TSC cannot stop all trailers from swaying. Always use caution when towing a trailer and follow the trailer tongue weight recommendations. See "⇨trailer towing" for further information. WARNING: If TSC activates while driving, slow the vehicle down, stop at the nearest safe location, and adjust the trailer load to eliminate trailer sway.
Answer to user's question:
|
dev_47
|
Adaptive Ensemble Search
|
What can the Uconnect system do?
|
The Uconnect system is a sophisticated electronic device. Do not let young children use the system. Permanent hearing loss may occur if you play your music or sound system at loud volumes. Exercise caution when setting the volume on the system. Keep drinks, rain and other sources of moisture away from the system. Besides damage to the system, moisture can cause electric shocks as with any electronic device. It is possible to have multiple devices connected to the Uconnect system. For example, if using Android Auto™/Apple CarPlay®, the connected device will be used to place hands-free phone calls or send hands-free text messages. However, another device can also be paired to the Uconnect system, via Bluetooth®, as an audio source, so the passenger can stream music. Uconnect Phone is a voice-activated, hands-free, in-vehicle communications system. It allows you to dial a phone number with your mobile phone.
|
The Uconnect system is a sophisticated electronic device that can do the following: 1. Connect multiple devices such as Android Auto™/Apple CarPlay® and Bluetooth® as an audio source. 2. Place hands-free phone calls or send hands-free text messages using a connected device. 3. Dial a phone number with your mobile phone using the Uconnect Phone, which is a voice-activated, hands-free, in-vehicle communications system. 4. Play music or sound system at a volume that should be set with caution to avoid permanent hearing loss. 5. Should be kept away from drinks, rain, and other sources of moisture to avoid damage to the system and electric shocks.
|
['R1: The Uconnect system is a sophisticated electronic device that can do the following: 1.', 'R2: Connect multiple devices such as Android Auto™/Apple CarPlay® and Bluetooth® as an audio source.', 'R3: 2. Place hands-free phone calls or send hands-free text messages using a connected device.', 'R4: 3. Dial a phone number with your mobile phone using the Uconnect Phone, which is a voice-activated, hands-free, in-vehicle communications system.', 'R5: 4. Play music or sound system at a volume that should be set with caution to avoid permanent hearing loss.', 'R6: 5. Should be kept away from drinks, rain, and other sources of moisture to avoid damage to the system and electric shocks.']
|
{'R1': 'Supported', 'R2': 'Supported', 'R3': 'Neither', 'R4': 'Supported', 'R5': 'Supported', 'R6': 'Supported'}
|
No
| false
| 1
|
You are a helpful assistant to car related questions. You will be given an user's question, and the relevant part of the car manual. Your task is to answer the user's question using the information giver. Do not add to your answer any information other than those present in the manual excerpt.
User question:
What can the Uconnect system do?
Manual information:
The Uconnect system is a sophisticated electronic device. Do not let young children use the system. Permanent hearing loss may occur if you play your music or sound system at loud volumes. Exercise caution when setting the volume on the system. Keep drinks, rain and other sources of moisture away from the system. Besides damage to the system, moisture can cause electric shocks as with any electronic device. It is possible to have multiple devices connected to the Uconnect system. For example, if using Android Auto™/Apple CarPlay®, the connected device will be used to place hands-free phone calls or send hands-free text messages. However, another device can also be paired to the Uconnect system, via Bluetooth®, as an audio source, so the passenger can stream music. Uconnect Phone is a voice-activated, hands-free, in-vehicle communications system. It allows you to dial a phone number with your mobile phone.
Answer to user's question:
|
End of preview. Expand
in Data Studio
README.md exists but content is empty.
- Downloads last month
- 7