MACHINE_NO stringclasses 48 values | ERROR_ID int64 1 999 | ERROR_CODE stringclasses 245 values | ERROR_DESC stringlengths 14 179 | ERROR_CATEGORY1 stringclasses 11 values | SOLUTION stringlengths 40 290 |
|---|---|---|---|---|---|
KM-ASSYH2-07 | 14 | M7013 | [Previous paragraph] M7013-Origin return ended abnormally | Electronic control abnormality | The solution for the error described as M7013-Origin return ended abnormally is to check the network connection, routing, and firewall settings to ensure they are properly configured. Incorrect IP or hostname, or a mis |
KM-ASSYH2-07 | 15 | M7014 | [Previous paragraph] M7014-Automatic positioning ended abnormally | Electronic control abnormality | The solution for the error "M7014-Automatic positioning ended abnormally" is to check and ensure that the automatic positioning system is properly calibrated, and that there are no obstructions preventing the movement. If |
KM-ASSYH2-07 | 16 | M7015 | [Previous section] M7015-Manual positioning ended abnormally | Electronic control abnormality | If you're encountering the "M7015-Manual positioning ended abnormally" error while setting up a printer, it could be caused by any number of factors, including incorrect settings, power supply issues, or paper |
KM-ASSYH2-07 | 17 | M7016 | [Previous section] M7016-EMO&&DOOR is open, please check the safety door or emergency stop | Abnormal personnel operation | The solution for the error "M7016-EMO&&DOOR is open, please check the safety door or emergency stop?" in a Siemens SIMATIC HMI system is usually to close the safety door or press |
KM-ASSYH2-07 | 18 | M7017 | [Previous paragraph] M7017-Equipment model setting is abnormal, please set the model | Abnormal personnel operation | The solution for the error is to set the equipment model according to the manufacturer's instructions. This can typically be found in the documentation or on the manufacturer's website. If you are unable to find the instructions, you may need to contact the |
KM-ASSYH2-07 | 19 | M7018 | [Previous paragraph] M7018-Please press the reset button before starting the automatic process | Abnormal personnel operation | The solution to this error would be to press the reset button as instructed before starting the automatic process. If the reset button doesn't work, try resetting the device or contacting customer support for further assistance. |
KM-ASSYH2-07 | 20 | M7019 | [Previous paragraph] M7019-The device has not returned to the origin, please execute the device to return to the origin first | Abnormal personnel operation | The error M7019 usually indicates that the device has not returned to the starting location. To resolve this, the device needs to be executed or instructed to return to its original location before proceeding with the task. This information is typically |
KM-ASSYH2-07 | 21 | M7020 | [Front Section] M7020-There is abnormal material on the conveyor belt during width adjustment | Abnormal personnel operation | The solution for the M7020 error involving abnormal material on the conveyor belt during width adjustment is to remove the material, reset any manual settings, and perform an emergency stop to prevent further problems. Once the issue is resolved, |
KM-ASSYH2-07 | 22 | M7021 | [Previous paragraph] M7021-Product abnormality when starting secondary positioning | Abnormal personnel operation | The solution to M7021-Product abnormality error when starting secondary positioning may involve updating the Firmware to the latest version or manually resetting the device settings. If the problem persists, it is recommended to contact the |
KM-ASSYH2-07 | 24 | M7023 | [Front section] M7023-Conveyor belt point position is abnormal, please confirm whether the point position corresponds to the machine model | Abnormal personnel operation | The solution to the M7023 abnormal conveyor belt point position error would be to first verify if the machine model corresponds to the point position and if not, take the necessary actions to correct the issue to ensure proper functionality. |
KM-ASSYH2-07 | 26 | M7025 | [Previous paragraph] M7025-buffer area abnormal material alarm | Abnormal personnel operation | The solution for the M7025-buffer area abnormal material alarm typically involves performing an inspection of the buffer area or replacing any damaged materials to ensure that the area is functioning properly. If the issue persists, further troubleshooting |
KM-ASSYH2-07 | 27 | M7026 | [Previous section] M7026-The left suction nozzle continuously failed abnormally | Electronic control abnormality | The solution for the error M7026: "The left suction nozzle continuously failed abnormally" is likely related to a mechanical or electrical issue with the suction nozzle. The problem might be due to wear and |
KM-ASSYH2-07 | 28 | M7027 | [Previous section] M7027-The right suction nozzle continuously fails abnormally | Electronic control abnormality | The solution for M7027 error involves inspecting the suction nozzle, ensuring proper sealing, and replacing the worn nozzle with new or reusable ones. Additionally, cleaning the nozzle and checking the flow |
KM-ASSYH2-07 | 29 | M7028 | [Previous section] M7028-EMO&&DOOR is open, please check the safety door or emergency stop | Abnormal personnel operation | The solution for the error "M7028-EMO&&DOOR is open, please check the safety door or emergency stop?" is to verify that the safety door or emergency stop is closed before operating the machine. If the safety door |
KM-ASSYH2-07 | 30 | M7029 | [Previous section] M7029-Servo operation condition abnormality | Electronic control abnormality | One potential solution to the M7029-Servo operation condition abnormality error is to adjust the servo parameters and cycle position by a certain incremental amount or to reset and reconfigure the system according to its recommended specifications. |
KM-ASSYH2-07 | 31 | M7030 | [Previous paragraph] Communication abnormality between M7030-PLC1 and PLC2 | Electronic control abnormality | The solution for the communication abnormality between M7030-PLC1 and PLC2 could be checking the communication protocol and ensuring that both PLCs are linked properly. Confirming that the crossover cable is |
KM-ASSYH2-07 | 32 | M7031 | [Previous section] M7031-Abnormal material on the clamping jaw during startup | Abnormal personnel operation | The solution for the error M7031-Abnormal material on the clamping jaw during startup typically involves cleaning the clamping jaw and the surrounding area with suitable cleaning agents, as well as performing any necessary repairs or adjustments to |
KM-ASSYH2-07 | 33 | M7032 | [Previous section] M7032-buffer area conveyor belt card abnormality | Organizational Abnormality | The solution to the M7032-buffer area conveyor belt card abnormality error can be found by checking the belt speed and tension, verifying the connection between the card and the controller, and calibrating the belt position sensors |
KM-ASSYH3-03 | 1 | M7000 | M7000-Start detecting the presence of materials in the work area | Abnormal personnel operation | To solve the error M7000-Start detecting the presence of materials in the work area, the first step should be to check for any potential sources of contamination such as spills, debris, or dust particles. Once any materials |
KM-ASSYH3-03 | 17 | M7016 | M7016-EMO&&DOOR is open, please check the safety door or emergency stop X30 | Abnormal personnel operation | M7016-EMO&&DOOR is open - error message. |
KM-ASSYH3-03 | 18 | M7017 | M7017-Equipment model setting is abnormal, please set the model | Abnormal personnel operation | The solution for the M7017-Equipment model setting is abnormal error is to check for invalid or missing values in the model settings, and to update the model accordingly. Additionally, ensure that the equipment model being used is a |
KM-ASSYH3-03 | 19 | M7018 | M7018-Please press the reset button before starting the automatic process | Abnormal personnel operation | M7018 error usually occurs when the printer's automatic process fails to initiate properly. The solution is to press the reset button or perform a power cycle to restart the printer. |
KM-ASSYH3-03 | 20 | M7019 | M7019-The device has not returned to the origin, please execute the device to return to the origin first | Abnormal personnel operation | The solution to the M7019 error is to first execute the device to return to its origin before attempting any further actions. This error occurs when a device is not properly synchronized with its origin, and it requires the device to be returned to |
KM-ASSYH3-03 | 21 | M7020 | M7020-There is product in the left pressing area when starting | Abnormal personnel operation | The solution for the error described as M7020-"There is product in the left pressing area when starting" is to move any obstructions or product out of the left pressing area of the printer before attempting to start the print job. |
KM-ASSYH3-03 | 22 | M7021 | M7021-There is a product in the middle pressing area during startup | Abnormal personnel operation | The M7021 error message indicates that there is a product in the middle pressing area during startup. To resolve the issue, remove the product from the area and check for any potential obstructions or debris that may be causing the issue. If |
KM-ASSYH3-03 | 23 | M7022 | M7022-There is product on the gripper of the right flip area during startup | Abnormal personnel operation | The solution for the error M7022-There is product on the gripper of the right flip area during startup is to remove any items from the gripper and clear the work area before starting the machine. |
KM-ASSYH3-03 | 24 | M7023 | M7023-There is a product on the left slide nozzle when starting, please take out the product and turn off the vacuum suction | Abnormal personnel operation | The solution for M7023 error is to remove the product from the left slide nozzle and turn off the vacuum suction. |
KM-ASSYH3-03 | 25 | M7024 | M7024-There is a product on the nozzle of the middle slide table when starting, please take out the product and turn off the vacuum suction | Abnormal personnel operation | To resolve this error, follow these steps: 1. Turn off the vacuum suction and prevent any further products from entering the middle slide table nozzle. 2. Manually remove any existing product from the nozzle. 3 |
KM-ASSYH3-03 | 26 | M7025 | M7025-There is a product on the right nozzle when starting, please take out the product and turn off the vacuum suction | Abnormal personnel operation | M7025 is an error message indicating that there is a product on the right nozzle while starting the vacuum cleaner. To resolve this, disconnect the hose from the suction inlet and press the button to turn off |
KM-ASSYH3-03 | 27 | M7026 | Kazam communication failed | Kazam exception | The solution for the "Kazam communication failed" error may vary depending on the specific cause of the issue. It could be due to an incorrect or outdated configuration, lack of permissions, or connectivity problems. Checking the Kazam server |
KM-ASSYH3-03 | 28 | M7027 | M7027-The machine model has been switched, please reset the belt width adjustment first | Abnormal personnel operation | This error typically occurs when you switch between different machine models and forget to reset the belt width adjustment. To resolve the error, follow these steps: identify the correct belt width for your new machine model, and adjust the belt width accordingly. If you |
KM-ASSYH3-03 | 29 | M7028 | M028-Please remove the TRAY plate from the conveyor belt first | Abnormal personnel operation | The solution to the error M028 is to follow the proper sequence of steps. This includes removing the TRAY plate from the conveyor belt before proceeding further. The system should be designed to ensure the correct order of steps are followed, |
KM-ASSYH3-03 | 33 | M7032 | M7032-The feeding operation of the left working area conveyor belt has timed out, please check sensor X31 | Sensor abnormality | The solution for the error "M7032-The feeding operation of the left working area conveyor belt has timed out, please check sensor X31" is to investigate and repair or replace the faulty sensor X31, |
KM-ASSYH2-07 | 34 | M7033 | [Previous paragraph] M7033-Disconnected from upstream communication | Electronic control abnormality | The M7033 communication error typically occurs when a device is unable to connect to upstream communication. This issue can be resolved by checking the communication settings and connections on both the device and upstream system, and adjusting them as needed. |
KM-ASSYH2-07 | 35 | M7034 | [Previous section] M7034-Abnormal conveyor belt card in work area | Organizational Abnormality | The solution for the M7034-Abnormal conveyor belt card in work area could involve several steps such as inspecting the belt for damage, clearing any debris or foreign objects, tightening the belt or replacing it if it's |
KM-ASSYH2-07 | 38 | M7037 | [Front section] M7037-Work area blocking cylinder abnormality | Machine cylinder abnormality | The solution for the error described as Front section M7037-Work area blocking cylinder abnormality is to use the CNC controller's diagnostic capabilities to identify the problem and then follow the manufacturer's instructions for repair or replacement |
KM-ASSYH2-07 | 40 | M7039 | [Front Section] M7039 - Abnormal positioning cylinder on the side of the work area | Machine cylinder abnormality | The solution for the M7039 error is to ensure that the positioning cylinder is in its proper location and properly secured, and to verify that all safety interlocks are functioning properly. If the issue cannot be resolved, contacting |
KM-ASSYH2-07 | 43 | M7042 | [Front section] M7042-The front limit of the width adjustment motor is abnormal | Electronic control abnormality | The solution for the M7042 error is to first determine if the abnormal front limit is due to a hardware or software issue. If the issue is hardware, then it may be necessary to replace the motor or adjust its physical limits. |
KM-ASSYH2-07 | 49 | M7048 | [Previous section] M7048-Left suction nozzle lifting cylinder abnormality | Machine cylinder abnormality | The solution to the error M7048-Left suction nozzle lifting cylinder abnormality involves inspecting and repairing the left suction nozzle lifting cylinder, replacing worn-out seals, checking and adjust |
KM-ASSYH2-07 | 51 | M7050 | [Front Section] M7050-Left lifting cylinder abnormality | Machine cylinder abnormality | The solution for the error described as [Front Section] M7050-Left lifting cylinder abnormality involves troubleshooting, inspection, and repair of the affected components, including the lifting cylinder and any associated controls or components |
KM-ASSYH2-07 | 53 | M7052 | [Previous section] M7052-Right suction nozzle lifting cylinder abnormality | Machine cylinder abnormality | The solution for the error described as M7052-Right suction nozzle lifting cylinder abnormality would involve identifying and correcting any potential issues with the lifting cylinder's wiring or connections, ensuring proper tension in |
KM-ASSYH3-03 | 34 | M7033 | M7033-The discharging operation of the left working area conveyor belt has timed out, please check sensor X31 | Sensor abnormality | The M7033 error indicates that the discharging operation on the left working area conveyor belt has timed out, and it requires checking sensor X31 for any failure or malfunction. To resolve this issue, you can start |
KM-ASSYH3-04 | 185 | M7024 | Rear section-M7024-The conveyor belt product cannot return to the origin | Abnormal personnel operation | This error occurs when a conveyor belt product is removed from its conveyor belt and cannot be returned to its original location. The solution may involve resetting the belt, verifying that the product is properly aligned, or contacting the manufacturer for assistance |
KM-ASSYH3-04 | 17 | M7016 | M7016-EMO&&DOOR is open, please check the safety door or emergency stop | Abnormal personnel operation | The M7016-EMO&&DOOR is open error signifies that the safety door or emergency stop is open, which is unsafe. The solution is to ensure that the safety door and emergency stop are properly closed before resuming work |
KM-ASSYH3-04 | 18 | M7017 | M7017-Equipment model setting is abnormal, please set the model | Abnormal personnel operation | The solution for the M7017-Equipment model setting is abnormal error is to check for invalid or missing values in the model settings, and to update the model accordingly. Additionally, ensure that the equipment model being used is a |
KM-ASSYH3-04 | 19 | M7018 | M7018-Please press the reset button before starting the automatic process | Abnormal personnel operation | M7018 error usually occurs when the printer's automatic process fails to initiate properly. The solution is to press the reset button or perform a power cycle to restart the printer. |
KM-ASSYH3-04 | 20 | M7019 | M7019-The device has not returned to the origin, please execute the device to return to the origin first | Abnormal personnel operation | The solution to the M7019 error is to first execute the device to return to its origin before attempting any further actions. This error occurs when a device is not properly synchronized with its origin, and it requires the device to be returned to |
KM-ASSYH3-04 | 178 | M7017 | M7017-Equipment model setting is abnormal, please set the model | Abnormal personnel operation | The solution for the M7017-Equipment model setting is abnormal error is to check for invalid or missing values in the model settings, and to update the model accordingly. Additionally, ensure that the equipment model being used is a |
KM-ASSYH3-04 | 179 | M7018 | M7018-Please press the reset button before starting the automatic process | Abnormal personnel operation | M7018 error usually occurs when the printer's automatic process fails to initiate properly. The solution is to press the reset button or perform a power cycle to restart the printer. |
KM-ASSYH3-04 | 180 | M7019 | M7019-The device has not returned to the origin, please execute the device to return to the origin first | Abnormal personnel operation | The solution to the M7019 error is to first execute the device to return to its origin before attempting any further actions. This error occurs when a device is not properly synchronized with its origin, and it requires the device to be returned to |
KM-ASSYH3-04 | 177 | M7016 | M7016-EMO&&DOOR is open, please check the safety door or emergency stop | Abnormal personnel operation | The M7016-EMO&&DOOR is open error signifies that the safety door or emergency stop is open, which is unsafe. The solution is to ensure that the safety door and emergency stop are properly closed before resuming work |
KM-ASSYH3-04 | 25 | M7024 | Front section-M7024-The conveyor belt product cannot return to the origin | Abnormal personnel operation | The solution for the Front section-M7024 error is to ensure the conveyor belt is properly programmed and configured to allow products to return to the origin. This can involve adjusting the control system settings, resetting the belt, |
KM-ASSYH3-05 | 131 | M7130 | Front section PLC1-M7130-Please remove the TRAY plate from the conveyor belt first | Abnormal personnel operation | The solution to the error "Front section PLC1-M7130-Please remove the TRAY plate from the conveyor belt first" is to physically remove the tray plate from the conveyor belt before attempting to process any items. |
KM-ASSYH3-05 | 161 | M7000 | The back-end PLC2-M7000-starts to detect that there is material in the work area, please confirm the status of the work area | Abnormal personnel operation | The solution for the error would be to visually inspect the work area to confirm if there is any material present. Once the area is clear, the PLC can be restarted, and the error should no longer occur. |
KM-ASSYH3-05 | 178 | M7017 | Backend PLC2-M7017-Equipment model setting is abnormal, please set the model | Abnormal personnel operation | The solution for the error "Backend PLC2-M7017-Equipment model setting is abnormal, please set the model" is to locate and reset the faulty equipment's Model Number on the Backend PLC |
KM-ASSYH3-05 | 180 | M7019 | Post-stage PLC2-M7019-the equipment has not returned to the origin, please perform the equipment return to the origin first | Abnormal personnel operation | The solution to the error "Post-stage PLC2-M7019-the equipment has not returned to the origin, please perform the equipment return to the origin first" involves performing an equipment return to the origin first. This ensures |
KM-ASSYH3-05 | 1 | M7000 | The front-end PLC1-M7000-starts to detect that there is material in the work area, please confirm the status of the work area | Abnormal personnel operation | Unfortunately, without any context or additional information provided, it's impossible to provide a specific solution to the described error. However, it is recommended to check the documentation and user manuals for the PLC1-M7000, as |
KM-ASSYH3-05 | 18 | M7017 | Front stage PLC1-M7017-Equipment model setting is abnormal, please set the model | Abnormal personnel operation | The solution for the abnormal Front stage PLC1-M7017 equipment model setting is to set a new, valid model in the PLC. This can usually be done through the PLC's programming software or by physically reset |
KM-ASSYH3-05 | 20 | M7019 | Previous PLC1-M7019-The equipment has not returned to the origin, please perform the equipment return to the origin first | Abnormal personnel operation | The solution to the error "Previous PLC1-M7019-The equipment has not returned to the origin, please perform the equipment return to the origin first" is to first perform the equipment return to the origin before proceeding with |
KM-ASSYH3-06 | 161 | M7000 | The back-end PLC2-M7000-starts to detect that there is material in the work area, please confirm the status of the work area | Abnormal personnel operation | The solution for the error would be to visually inspect the work area to confirm if there is any material present. Once the area is clear, the PLC can be restarted, and the error should no longer occur. |
KM-ASSYH3-06 | 178 | M7017 | Backend PLC2-M7017-Equipment model setting is abnormal, please set the model | Abnormal personnel operation | The solution for the error "Backend PLC2-M7017-Equipment model setting is abnormal, please set the model" is to locate and reset the faulty equipment's Model Number on the Backend PLC |
KM-ASSYH3-06 | 180 | M7019 | Post-stage PLC2-M7019-the equipment has not returned to the origin, please perform the equipment return to the origin first | Abnormal personnel operation | The solution to the error "Post-stage PLC2-M7019-the equipment has not returned to the origin, please perform the equipment return to the origin first" involves performing an equipment return to the origin first. This ensures |
KM-ASSYH3-05 | 19 | M7018 | Front stage PLC1-M7018-Please press the reset button before starting the automatic process | Abnormal personnel operation | The solution for the Front stage PLC1-M7018 error described as "Please press the reset button before starting the automatic process" is as follows: Press the reset button before starting the automatic process. This process should restart and run |
KM-ASSYH3-05 | 179 | M7018 | Backend PLC2-M7018-Please press the reset button before starting the automatic process | Abnormal personnel operation | The solution for the error "Backend PLC2-M7018-Please press the reset button before starting the automatic process" is to press the reset button for the PLC2-M7018 device to restart the automatic |
KM-ASSYH3-05 | 291 | M7130 | Rear section PLC2-M7130-Please remove the TRAY plate from the conveyor belt first | Abnormal personnel operation | One possible solution for this error is to physically remove the TRAY plate from the conveyor belt before the PLC2-M7130 can be accessed. This should prevent any interference or damage to the belt caused by the plate's |
KM-ASSYH3-05 | 177 | M7016 | When the rear section PLC2-M7016-EMO&&DOOR is opened, please check the safety door or emergency stop X17 | Abnormal personnel operation | The solution for the error you described is to ensure that the safety door or emergency stop X17 is functioning properly and has not been triggered when the PLC2-M7016-EMO&&DOOR section is opened. This |
KM-ASSYH3-05 | 17 | M7016 | If the front section PLC1-M7016-EMO&&DOOR is opened, please check the safety door or emergency stop X17 | Abnormal personnel operation | The solution for this error is to check the safety door or emergency stop X17 when the front section PLC1-M7016-EMO&&DOOR is opened. |
KM-ASSYH3-06 | 19 | M7018 | Front stage PLC1-M7018-Please press the reset button before starting the automatic process | Abnormal personnel operation | The solution for the Front stage PLC1-M7018 error described as "Please press the reset button before starting the automatic process" is as follows: Press the reset button before starting the automatic process. This process should restart and run |
KM-ASSYH3-06 | 179 | M7018 | Backend PLC2-M7018-Please press the reset button before starting the automatic process | Abnormal personnel operation | The solution for the error "Backend PLC2-M7018-Please press the reset button before starting the automatic process" is to press the reset button for the PLC2-M7018 device to restart the automatic |
KM-ASSYH3-06 | 291 | M7130 | Rear section PLC2-M7130-Please remove the TRAY plate from the conveyor belt first | Abnormal personnel operation | One possible solution for this error is to physically remove the TRAY plate from the conveyor belt before the PLC2-M7130 can be accessed. This should prevent any interference or damage to the belt caused by the plate's |
KM-ASSYH3-06 | 1 | M7000 | The front-end PLC1-M7000-starts to detect that there is material in the work area, please confirm the status of the work area | Abnormal personnel operation | Unfortunately, without any context or additional information provided, it's impossible to provide a specific solution to the described error. However, it is recommended to check the documentation and user manuals for the PLC1-M7000, as |
KM-ASSYH3-06 | 18 | M7017 | Front stage PLC1-M7017-Equipment model setting is abnormal, please set the model | Abnormal personnel operation | The solution for the abnormal Front stage PLC1-M7017 equipment model setting is to set a new, valid model in the PLC. This can usually be done through the PLC's programming software or by physically reset |
KM-ASSYH3-06 | 20 | M7019 | Previous PLC1-M7019-The equipment has not returned to the origin, please perform the equipment return to the origin first | Abnormal personnel operation | The solution to the error "Previous PLC1-M7019-The equipment has not returned to the origin, please perform the equipment return to the origin first" is to first perform the equipment return to the origin before proceeding with |
KM-ASSYH3-06 | 131 | M7130 | Front section PLC1-M7130-Please remove the TRAY plate from the conveyor belt first | Abnormal personnel operation | The solution to the error "Front section PLC1-M7130-Please remove the TRAY plate from the conveyor belt first" is to physically remove the tray plate from the conveyor belt before attempting to process any items. |
KM-ASSYH3-06 | 17 | M7016 | If the front section PLC1-M7016-EMO&&DOOR is opened, please check the safety door or emergency stop X17 | Abnormal personnel operation | The solution for this error is to check the safety door or emergency stop X17 when the front section PLC1-M7016-EMO&&DOOR is opened. |
KM-ASSYH3-06 | 177 | M7016 | When the rear section PLC2-M7016-EMO&&DOOR is opened, please check the safety door or emergency stop X17 | Abnormal personnel operation | The solution for the error you described is to ensure that the safety door or emergency stop X17 is functioning properly and has not been triggered when the PLC2-M7016-EMO&&DOOR section is opened. This |
KM-ASSYH3-07 | 1 | M7000 | [Previous section] M7000-Start to detect the presence of materials in the work area, please confirm the status of the work area | Abnormal personnel operation | The solution to the error M7000-Start to detect the presence of materials in the work area, please confirm the status of the work area is to ensure that the work area is clear and free of any materials. This will allow the |
KM-ASSYH3-07 | 17 | M7016 | [Previous section] M7016-EMO&&DOOR is open, please check the safety door or emergency stop | Abnormal personnel operation | The solution for the error "M7016-EMO&&DOOR is open, please check the safety door or emergency stop?" in a Siemens SIMATIC HMI system is usually to close the safety door or press |
KM-ASSYH3-07 | 18 | M7017 | [Previous paragraph] M7017-Equipment model setting is abnormal, please set the model | Abnormal personnel operation | The solution for the error is to set the equipment model according to the manufacturer's instructions. This can typically be found in the documentation or on the manufacturer's website. If you are unable to find the instructions, you may need to contact the |
KM-ASSYH3-07 | 19 | M7018 | [Previous paragraph] M7018-Please press the reset button before starting the automatic process | Abnormal personnel operation | The solution to this error would be to press the reset button as instructed before starting the automatic process. If the reset button doesn't work, try resetting the device or contacting customer support for further assistance. |
KM-ASSYH3-07 | 22 | M7021 | [Previous paragraph] M7021-Product abnormality when starting secondary positioning | Abnormal personnel operation | The solution to M7021-Product abnormality error when starting secondary positioning may involve updating the Firmware to the latest version or manually resetting the device settings. If the problem persists, it is recommended to contact the |
KM-ASSYH3-07 | 161 | M7000 | [Later Section] M7000-Start to detect the presence of materials in the work area, please confirm the status of the work area | Abnormal personnel operation | The solution for the error described as [Later Section] M7000-Start is to confirm the status of the work area. This can be achieved by manually scanning the area using the device's sensor or by using software to |
KM-ASSYH3-07 | 178 | M7017 | [Later section] M7017-Equipment model setting is abnormal, please set the model | Abnormal personnel operation | To resolve the error "Later section M7017-Equipment model setting is abnormal, please set the model," follow these steps: 1. Power off the device in question. 2. Reset the device to its |
KM-ASSYH3-07 | 182 | M7021 | [Later Section] M7021-Product abnormality when starting secondary positioning | Abnormal personnel operation | The solution to the error described in M7021-Product abnormality when starting secondary positioning is to ensure that the product is positioned correctly and not obstructed. Additionally, the operator should verify that all safety features are functioning properly |
KM-ASSYH3-07 | 189 | M7028 | [Later section] M7028-Safety door opens abnormally during return to origin | Abnormal personnel operation | The solution for the error described as M7028-Safety door opens abnormally during return to origin requires an inspection of the safety door drive system for any damage or malfunction. The door may need to be adjusted or replaced |
KM-ASSYH4-03 | 1 | M7000 | M7000-Start detecting the presence of materials in the work area | Abnormal personnel operation | To solve the error M7000-Start detecting the presence of materials in the work area, the first step should be to check for any potential sources of contamination such as spills, debris, or dust particles. Once any materials |
KM-ASSYH4-03 | 17 | M7016 | M7016-EMO&&DOOR is open, please check the safety door or emergency stop X30 | Abnormal personnel operation | M7016-EMO&&DOOR is open - error message. |
KM-ASSYH4-03 | 18 | M7017 | M7017-Equipment model setting is abnormal, please set the model | Abnormal personnel operation | The solution for the M7017-Equipment model setting is abnormal error is to check for invalid or missing values in the model settings, and to update the model accordingly. Additionally, ensure that the equipment model being used is a |
KM-ASSYH4-03 | 19 | M7018 | M7018-Please press the reset button before starting the automatic process | Abnormal personnel operation | M7018 error usually occurs when the printer's automatic process fails to initiate properly. The solution is to press the reset button or perform a power cycle to restart the printer. |
KM-ASSYH4-03 | 20 | M7019 | M7019-The device has not returned to the origin, please execute the device to return to the origin first | Abnormal personnel operation | The solution to the M7019 error is to first execute the device to return to its origin before attempting any further actions. This error occurs when a device is not properly synchronized with its origin, and it requires the device to be returned to |
KM-ASSYH4-03 | 21 | M7020 | M7020-There is product in the left pressing area when starting | Abnormal personnel operation | The solution for the error described as M7020-"There is product in the left pressing area when starting" is to move any obstructions or product out of the left pressing area of the printer before attempting to start the print job. |
KM-ASSYH4-03 | 22 | M7021 | M7021-There is a product in the middle pressing area during startup | Abnormal personnel operation | The M7021 error message indicates that there is a product in the middle pressing area during startup. To resolve the issue, remove the product from the area and check for any potential obstructions or debris that may be causing the issue. If |
KM-ASSYH4-03 | 23 | M7022 | M7022-There is product on the gripper of the right flip area during startup | Abnormal personnel operation | The solution for the error M7022-There is product on the gripper of the right flip area during startup is to remove any items from the gripper and clear the work area before starting the machine. |
KM-ASSYH4-03 | 24 | M7023 | M7023-There is a product on the left slide nozzle when starting, please take out the product and turn off the vacuum suction | Abnormal personnel operation | The solution for M7023 error is to remove the product from the left slide nozzle and turn off the vacuum suction. |
KM-ASSYH4-03 | 25 | M7024 | M7024-There is a product on the nozzle of the middle slide table when starting, please take out the product and turn off the vacuum suction | Abnormal personnel operation | To resolve this error, follow these steps: 1. Turn off the vacuum suction and prevent any further products from entering the middle slide table nozzle. 2. Manually remove any existing product from the nozzle. 3 |
KM-ASSYH4-03 | 26 | M7025 | M7025-There is a product on the right nozzle when starting, please take out the product and turn off the vacuum suction | Abnormal personnel operation | M7025 is an error message indicating that there is a product on the right nozzle while starting the vacuum cleaner. To resolve this, disconnect the hose from the suction inlet and press the button to turn off |
KM-ASSYH4-03 | 27 | M7026 | Kazam communication failed | Kazam exception | The solution for the "Kazam communication failed" error may vary depending on the specific cause of the issue. It could be due to an incorrect or outdated configuration, lack of permissions, or connectivity problems. Checking the Kazam server |
KM-ASSYH4-03 | 28 | M7027 | M7027-The machine model has been switched, please reset the belt width adjustment first | Abnormal personnel operation | This error typically occurs when you switch between different machine models and forget to reset the belt width adjustment. To resolve the error, follow these steps: identify the correct belt width for your new machine model, and adjust the belt width accordingly. If you |
KM-ASSYH4-03 | 29 | M7028 | M028-Please remove the TRAY plate from the conveyor belt first | Abnormal personnel operation | The solution to the error M028 is to follow the proper sequence of steps. This includes removing the TRAY plate from the conveyor belt before proceeding further. The system should be designed to ensure the correct order of steps are followed, |
KM-ASSYH4-03 | 34 | M7033 | M7033-The discharging operation of the left working area conveyor belt has timed out, please check sensor X31 | Sensor abnormality | The M7033 error indicates that the discharging operation on the left working area conveyor belt has timed out, and it requires checking sensor X31 for any failure or malfunction. To resolve this issue, you can start |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.