repo_id
stringlengths 5
115
| size
int64 590
5.01M
| file_path
stringlengths 4
212
| content
stringlengths 590
5.01M
|
|---|---|---|---|
aegean-odyssey/mpmd_marlin_1.1.x
| 10,336
|
STM32Cube-1.10.1/Projects/STM32F031K6-Nucleo/Examples/GPIO/GPIO_IOToggle/MDK-ARM/startup_stm32f031x6.s
|
;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
;* File Name : startup_stm32f031x6.s
;* Author : MCD Application Team
;* Description : STM32F031x4/STM32F031x6 devices vector table for MDK-ARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == Reset_Handler
;* - Set the vector table entries with the exceptions ISR address
;* - Branches to __main in the C library (which eventually
;* calls main()).
;* After Reset the CortexM0 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;* <<< Use Configuration Wizard in Context Menu >>>
;*******************************************************************************
;
;* Redistribution and use in source and binary forms, with or without modification,
;* are permitted provided that the following conditions are met:
;* 1. Redistributions of source code must retain the above copyright notice,
;* this list of conditions and the following disclaimer.
;* 2. Redistributions in binary form must reproduce the above copyright notice,
;* this list of conditions and the following disclaimer in the documentation
;* and/or other materials provided with the distribution.
;* 3. Neither the name of STMicroelectronics nor the names of its contributors
;* may be used to endorse or promote products derived from this software
;* without specific prior written permission.
;*
;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
;
;*******************************************************************************
; Amount of memory (in bytes) allocated for Stack
; Tailor this value to your application needs
; <h> Stack Configuration
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Stack_Size EQU 0x400
AREA STACK, NOINIT, READWRITE, ALIGN=3
Stack_Mem SPACE Stack_Size
__initial_sp
; <h> Heap Configuration
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Heap_Size EQU 0x200
AREA HEAP, NOINIT, READWRITE, ALIGN=3
__heap_base
Heap_Mem SPACE Heap_Size
__heap_limit
PRESERVE8
THUMB
; Vector Table Mapped to Address 0 at Reset
AREA RESET, DATA, READONLY
EXPORT __Vectors
EXPORT __Vectors_End
EXPORT __Vectors_Size
__Vectors DCD __initial_sp ; Top of Stack
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window Watchdog
DCD PVD_IRQHandler ; PVD through EXTI Line detect
DCD RTC_IRQHandler ; RTC through EXTI Line
DCD FLASH_IRQHandler ; FLASH
DCD RCC_IRQHandler ; RCC
DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
DCD 0 ; Reserved
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Channel2_3_IRQHandler ; DMA1 Channel 2 and Channel 3
DCD DMA1_Channel4_5_IRQHandler ; DMA1 Channel 4 and Channel 5
DCD ADC1_IRQHandler ; ADC1
DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD TIM14_IRQHandler ; TIM14
DCD 0 ; Reserved
DCD TIM16_IRQHandler ; TIM16
DCD TIM17_IRQHandler ; TIM17
DCD I2C1_IRQHandler ; I2C1
DCD 0 ; Reserved
DCD SPI1_IRQHandler ; SPI1
DCD 0 ; Reserved
DCD USART1_IRQHandler ; USART1
__Vectors_End
__Vectors_Size EQU __Vectors_End - __Vectors
AREA |.text|, CODE, READONLY
; Reset handler routine
Reset_Handler PROC
EXPORT Reset_Handler [WEAK]
IMPORT __main
IMPORT SystemInit
LDR R0, =SystemInit
BLX R0
LDR R0, =__main
BX R0
ENDP
; Dummy Exception Handlers (infinite loops which can be modified)
NMI_Handler PROC
EXPORT NMI_Handler [WEAK]
B .
ENDP
HardFault_Handler\
PROC
EXPORT HardFault_Handler [WEAK]
B .
ENDP
SVC_Handler PROC
EXPORT SVC_Handler [WEAK]
B .
ENDP
PendSV_Handler PROC
EXPORT PendSV_Handler [WEAK]
B .
ENDP
SysTick_Handler PROC
EXPORT SysTick_Handler [WEAK]
B .
ENDP
Default_Handler PROC
EXPORT WWDG_IRQHandler [WEAK]
EXPORT PVD_IRQHandler [WEAK]
EXPORT RTC_IRQHandler [WEAK]
EXPORT FLASH_IRQHandler [WEAK]
EXPORT RCC_IRQHandler [WEAK]
EXPORT EXTI0_1_IRQHandler [WEAK]
EXPORT EXTI2_3_IRQHandler [WEAK]
EXPORT EXTI4_15_IRQHandler [WEAK]
EXPORT DMA1_Channel1_IRQHandler [WEAK]
EXPORT DMA1_Channel2_3_IRQHandler [WEAK]
EXPORT DMA1_Channel4_5_IRQHandler [WEAK]
EXPORT ADC1_IRQHandler [WEAK]
EXPORT TIM1_BRK_UP_TRG_COM_IRQHandler [WEAK]
EXPORT TIM1_CC_IRQHandler [WEAK]
EXPORT TIM2_IRQHandler [WEAK]
EXPORT TIM3_IRQHandler [WEAK]
EXPORT TIM14_IRQHandler [WEAK]
EXPORT TIM16_IRQHandler [WEAK]
EXPORT TIM17_IRQHandler [WEAK]
EXPORT I2C1_IRQHandler [WEAK]
EXPORT SPI1_IRQHandler [WEAK]
EXPORT USART1_IRQHandler [WEAK]
WWDG_IRQHandler
PVD_IRQHandler
RTC_IRQHandler
FLASH_IRQHandler
RCC_IRQHandler
EXTI0_1_IRQHandler
EXTI2_3_IRQHandler
EXTI4_15_IRQHandler
DMA1_Channel1_IRQHandler
DMA1_Channel2_3_IRQHandler
DMA1_Channel4_5_IRQHandler
ADC1_IRQHandler
TIM1_BRK_UP_TRG_COM_IRQHandler
TIM1_CC_IRQHandler
TIM2_IRQHandler
TIM3_IRQHandler
TIM14_IRQHandler
TIM16_IRQHandler
TIM17_IRQHandler
I2C1_IRQHandler
SPI1_IRQHandler
USART1_IRQHandler
B .
ENDP
ALIGN
;*******************************************************************************
; User Stack and Heap initialization
;*******************************************************************************
IF :DEF:__MICROLIB
EXPORT __initial_sp
EXPORT __heap_base
EXPORT __heap_limit
ELSE
IMPORT __use_two_region_memory
EXPORT __user_initial_stackheap
__user_initial_stackheap
LDR R0, = Heap_Mem
LDR R1, =(Stack_Mem + Stack_Size)
LDR R2, = (Heap_Mem + Heap_Size)
LDR R3, = Stack_Mem
BX LR
ALIGN
ENDIF
END
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
|
aegean-odyssey/mpmd_marlin_1.1.x
| 10,030
|
STM32Cube-1.10.1/Projects/STM32F031K6-Nucleo/Examples/GPIO/GPIO_IOToggle/SW4STM32/startup_stm32f031x6.s
|
/**
******************************************************************************
* @file startup_stm32f031x6.s
* @author MCD Application Team
* @brief STM32F031x4/STM32F031x6 devices vector table for GCC toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M0 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
.syntax unified
.cpu cortex-m0
.fpu softvfp
.thumb
.global g_pfnVectors
.global Default_Handler
/* start address for the initialization values of the .data section.
defined in linker script */
.word _sidata
/* start address for the .data section. defined in linker script */
.word _sdata
/* end address for the .data section. defined in linker script */
.word _edata
/* start address for the .bss section. defined in linker script */
.word _sbss
/* end address for the .bss section. defined in linker script */
.word _ebss
.section .text.Reset_Handler
.weak Reset_Handler
.type Reset_Handler, %function
Reset_Handler:
ldr r0, =_estack
mov sp, r0 /* set stack pointer */
/* Copy the data segment initializers from flash to SRAM */
movs r1, #0
b LoopCopyDataInit
CopyDataInit:
ldr r3, =_sidata
ldr r3, [r3, r1]
str r3, [r0, r1]
adds r1, r1, #4
LoopCopyDataInit:
ldr r0, =_sdata
ldr r3, =_edata
adds r2, r0, r1
cmp r2, r3
bcc CopyDataInit
ldr r2, =_sbss
b LoopFillZerobss
/* Zero fill the bss segment. */
FillZerobss:
movs r3, #0
str r3, [r2]
adds r2, r2, #4
LoopFillZerobss:
ldr r3, = _ebss
cmp r2, r3
bcc FillZerobss
/* Call the clock system intitialization function.*/
bl SystemInit
/* Call static constructors */
bl __libc_init_array
/* Call the application's entry point.*/
bl main
LoopForever:
b LoopForever
.size Reset_Handler, .-Reset_Handler
/**
* @brief This is the code that gets called when the processor receives an
* unexpected interrupt. This simply enters an infinite loop, preserving
* the system state for examination by a debugger.
*
* @param None
* @retval : None
*/
.section .text.Default_Handler,"ax",%progbits
Default_Handler:
Infinite_Loop:
b Infinite_Loop
.size Default_Handler, .-Default_Handler
/******************************************************************************
*
* The minimal vector table for a Cortex M0. Note that the proper constructs
* must be placed on this to ensure that it ends up at physical address
* 0x0000.0000.
*
******************************************************************************/
.section .isr_vector,"a",%progbits
.type g_pfnVectors, %object
.size g_pfnVectors, .-g_pfnVectors
g_pfnVectors:
.word _estack
.word Reset_Handler
.word NMI_Handler
.word HardFault_Handler
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word SVC_Handler
.word 0
.word 0
.word PendSV_Handler
.word SysTick_Handler
.word WWDG_IRQHandler /* Window WatchDog */
.word PVD_IRQHandler /* PVD through EXTI Line detect */
.word RTC_IRQHandler /* RTC through the EXTI line */
.word FLASH_IRQHandler /* FLASH */
.word RCC_IRQHandler /* RCC */
.word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */
.word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */
.word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */
.word 0 /* Reserved */
.word DMA1_Channel1_IRQHandler /* DMA1 Channel 1 */
.word DMA1_Channel2_3_IRQHandler /* DMA1 Channel 2 and Channel 3 */
.word DMA1_Channel4_5_IRQHandler /* DMA1 Channel 4 and Channel 5 */
.word ADC1_IRQHandler /* ADC1 */
.word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */
.word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
.word TIM2_IRQHandler /* TIM2 */
.word TIM3_IRQHandler /* TIM3 */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word TIM14_IRQHandler /* TIM14 */
.word 0 /* Reserved */
.word TIM16_IRQHandler /* TIM16 */
.word TIM17_IRQHandler /* TIM17 */
.word I2C1_IRQHandler /* I2C1 */
.word 0 /* Reserved */
.word SPI1_IRQHandler /* SPI1 */
.word 0 /* Reserved */
.word USART1_IRQHandler /* USART1 */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
/*******************************************************************************
*
* Provide weak aliases for each Exception handler to the Default_Handler.
* As they are weak aliases, any function with the same name will override
* this definition.
*
*******************************************************************************/
.weak NMI_Handler
.thumb_set NMI_Handler,Default_Handler
.weak HardFault_Handler
.thumb_set HardFault_Handler,Default_Handler
.weak SVC_Handler
.thumb_set SVC_Handler,Default_Handler
.weak PendSV_Handler
.thumb_set PendSV_Handler,Default_Handler
.weak SysTick_Handler
.thumb_set SysTick_Handler,Default_Handler
.weak WWDG_IRQHandler
.thumb_set WWDG_IRQHandler,Default_Handler
.weak PVD_IRQHandler
.thumb_set PVD_IRQHandler,Default_Handler
.weak RTC_IRQHandler
.thumb_set RTC_IRQHandler,Default_Handler
.weak FLASH_IRQHandler
.thumb_set FLASH_IRQHandler,Default_Handler
.weak RCC_IRQHandler
.thumb_set RCC_IRQHandler,Default_Handler
.weak EXTI0_1_IRQHandler
.thumb_set EXTI0_1_IRQHandler,Default_Handler
.weak EXTI2_3_IRQHandler
.thumb_set EXTI2_3_IRQHandler,Default_Handler
.weak EXTI4_15_IRQHandler
.thumb_set EXTI4_15_IRQHandler,Default_Handler
.weak DMA1_Channel1_IRQHandler
.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
.weak DMA1_Channel2_3_IRQHandler
.thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler
.weak DMA1_Channel4_5_IRQHandler
.thumb_set DMA1_Channel4_5_IRQHandler,Default_Handler
.weak ADC1_IRQHandler
.thumb_set ADC1_IRQHandler,Default_Handler
.weak TIM1_BRK_UP_TRG_COM_IRQHandler
.thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
.weak TIM1_CC_IRQHandler
.thumb_set TIM1_CC_IRQHandler,Default_Handler
.weak TIM2_IRQHandler
.thumb_set TIM2_IRQHandler,Default_Handler
.weak TIM3_IRQHandler
.thumb_set TIM3_IRQHandler,Default_Handler
.weak TIM14_IRQHandler
.thumb_set TIM14_IRQHandler,Default_Handler
.weak TIM16_IRQHandler
.thumb_set TIM16_IRQHandler,Default_Handler
.weak TIM17_IRQHandler
.thumb_set TIM17_IRQHandler,Default_Handler
.weak I2C1_IRQHandler
.thumb_set I2C1_IRQHandler,Default_Handler
.weak SPI1_IRQHandler
.thumb_set SPI1_IRQHandler,Default_Handler
.weak USART1_IRQHandler
.thumb_set USART1_IRQHandler,Default_Handler
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
aegean-odyssey/mpmd_marlin_1.1.x
| 9,957
|
STM32Cube-1.10.1/Projects/STM32F031K6-Nucleo/Examples/GPIO/GPIO_IOToggle/EWARM/startup_stm32f031x6.s
|
;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
;* File Name : startup_stm32f031x6.s
;* Author : MCD Application Team
;* Description : STM32F031x4/STM32F031x6 devices vector table for EWARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == __iar_program_start,
;* - Set the vector table entries with the exceptions ISR
;* address,
;* - Branches to main in the C library (which eventually
;* calls main()).
;* After Reset the Cortex-M0 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;*******************************************************************************
;*
;* Redistribution and use in source and binary forms, with or without modification,
;* are permitted provided that the following conditions are met:
;* 1. Redistributions of source code must retain the above copyright notice,
;* this list of conditions and the following disclaimer.
;* 2. Redistributions in binary form must reproduce the above copyright notice,
;* this list of conditions and the following disclaimer in the documentation
;* and/or other materials provided with the distribution.
;* 3. Neither the name of STMicroelectronics nor the names of its contributors
;* may be used to endorse or promote products derived from this software
;* without specific prior written permission.
;*
;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
;*
;*******************************************************************************
;
;
; The modules in this file are included in the libraries, and may be replaced
; by any user-defined modules that define the PUBLIC symbol _program_start or
; a user defined start symbol.
; To override the cstartup defined in the library, simply add your modified
; version to the workbench project.
;
; The vector table is normally located at address 0.
; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
; The name "__vector_table" has special meaning for C-SPY:
; it is where the SP start value is found, and the NVIC vector
; table register (VTOR) is initialized to this address if != 0.
;
; Cortex-M version
;
MODULE ?cstartup
;; Forward declaration of sections.
SECTION CSTACK:DATA:NOROOT(3)
SECTION .intvec:CODE:NOROOT(2)
EXTERN __iar_program_start
EXTERN SystemInit
PUBLIC __vector_table
DATA
__vector_table
DCD sfe(CSTACK)
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window Watchdog
DCD PVD_IRQHandler ; PVD through EXTI Line detect
DCD RTC_IRQHandler ; RTC through EXTI Line
DCD FLASH_IRQHandler ; FLASH
DCD RCC_IRQHandler ; RCC
DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
DCD 0 ; Reserved
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Channel2_3_IRQHandler ; DMA1 Channel 2 and Channel 3
DCD DMA1_Channel4_5_IRQHandler ; DMA1 Channel 4 and Channel 5
DCD ADC1_IRQHandler ; ADC1
DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD TIM14_IRQHandler ; TIM14
DCD 0 ; Reserved
DCD TIM16_IRQHandler ; TIM16
DCD TIM17_IRQHandler ; TIM17
DCD I2C1_IRQHandler ; I2C1
DCD 0 ; Reserved
DCD SPI1_IRQHandler ; SPI1
DCD 0 ; Reserved
DCD USART1_IRQHandler ; USART1
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Default interrupt handlers.
;;
THUMB
PUBWEAK Reset_Handler
SECTION .text:CODE:NOROOT:REORDER(2)
Reset_Handler
LDR R0, =SystemInit
BLX R0
LDR R0, =__iar_program_start
BX R0
PUBWEAK NMI_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
NMI_Handler
B NMI_Handler
PUBWEAK HardFault_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
HardFault_Handler
B HardFault_Handler
PUBWEAK SVC_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
SVC_Handler
B SVC_Handler
PUBWEAK PendSV_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
PendSV_Handler
B PendSV_Handler
PUBWEAK SysTick_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
SysTick_Handler
B SysTick_Handler
PUBWEAK WWDG_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
WWDG_IRQHandler
B WWDG_IRQHandler
PUBWEAK PVD_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
PVD_IRQHandler
B PVD_IRQHandler
PUBWEAK RTC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
RTC_IRQHandler
B RTC_IRQHandler
PUBWEAK FLASH_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
FLASH_IRQHandler
B FLASH_IRQHandler
PUBWEAK RCC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
RCC_IRQHandler
B RCC_IRQHandler
PUBWEAK EXTI0_1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI0_1_IRQHandler
B EXTI0_1_IRQHandler
PUBWEAK EXTI2_3_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI2_3_IRQHandler
B EXTI2_3_IRQHandler
PUBWEAK EXTI4_15_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI4_15_IRQHandler
B EXTI4_15_IRQHandler
PUBWEAK DMA1_Channel1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Channel1_IRQHandler
B DMA1_Channel1_IRQHandler
PUBWEAK DMA1_Channel2_3_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Channel2_3_IRQHandler
B DMA1_Channel2_3_IRQHandler
PUBWEAK DMA1_Channel4_5_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Channel4_5_IRQHandler
B DMA1_Channel4_5_IRQHandler
PUBWEAK ADC1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
ADC1_IRQHandler
B ADC1_IRQHandler
PUBWEAK TIM1_BRK_UP_TRG_COM_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM1_BRK_UP_TRG_COM_IRQHandler
B TIM1_BRK_UP_TRG_COM_IRQHandler
PUBWEAK TIM1_CC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM1_CC_IRQHandler
B TIM1_CC_IRQHandler
PUBWEAK TIM2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM2_IRQHandler
B TIM2_IRQHandler
PUBWEAK TIM3_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM3_IRQHandler
B TIM3_IRQHandler
PUBWEAK TIM14_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM14_IRQHandler
B TIM14_IRQHandler
PUBWEAK TIM16_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM16_IRQHandler
B TIM16_IRQHandler
PUBWEAK TIM17_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM17_IRQHandler
B TIM17_IRQHandler
PUBWEAK I2C1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
I2C1_IRQHandler
B I2C1_IRQHandler
PUBWEAK SPI1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
SPI1_IRQHandler
B SPI1_IRQHandler
PUBWEAK USART1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
USART1_IRQHandler
B USART1_IRQHandler
END
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
|
aegean-odyssey/mpmd_marlin_1.1.x
| 10,336
|
STM32Cube-1.10.1/Projects/STM32F031K6-Nucleo/Examples/FLASH/FLASH_EraseProgram/MDK-ARM/startup_stm32f031x6.s
|
;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
;* File Name : startup_stm32f031x6.s
;* Author : MCD Application Team
;* Description : STM32F031x4/STM32F031x6 devices vector table for MDK-ARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == Reset_Handler
;* - Set the vector table entries with the exceptions ISR address
;* - Branches to __main in the C library (which eventually
;* calls main()).
;* After Reset the CortexM0 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;* <<< Use Configuration Wizard in Context Menu >>>
;*******************************************************************************
;
;* Redistribution and use in source and binary forms, with or without modification,
;* are permitted provided that the following conditions are met:
;* 1. Redistributions of source code must retain the above copyright notice,
;* this list of conditions and the following disclaimer.
;* 2. Redistributions in binary form must reproduce the above copyright notice,
;* this list of conditions and the following disclaimer in the documentation
;* and/or other materials provided with the distribution.
;* 3. Neither the name of STMicroelectronics nor the names of its contributors
;* may be used to endorse or promote products derived from this software
;* without specific prior written permission.
;*
;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
;
;*******************************************************************************
; Amount of memory (in bytes) allocated for Stack
; Tailor this value to your application needs
; <h> Stack Configuration
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Stack_Size EQU 0x400
AREA STACK, NOINIT, READWRITE, ALIGN=3
Stack_Mem SPACE Stack_Size
__initial_sp
; <h> Heap Configuration
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Heap_Size EQU 0x200
AREA HEAP, NOINIT, READWRITE, ALIGN=3
__heap_base
Heap_Mem SPACE Heap_Size
__heap_limit
PRESERVE8
THUMB
; Vector Table Mapped to Address 0 at Reset
AREA RESET, DATA, READONLY
EXPORT __Vectors
EXPORT __Vectors_End
EXPORT __Vectors_Size
__Vectors DCD __initial_sp ; Top of Stack
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window Watchdog
DCD PVD_IRQHandler ; PVD through EXTI Line detect
DCD RTC_IRQHandler ; RTC through EXTI Line
DCD FLASH_IRQHandler ; FLASH
DCD RCC_IRQHandler ; RCC
DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
DCD 0 ; Reserved
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Channel2_3_IRQHandler ; DMA1 Channel 2 and Channel 3
DCD DMA1_Channel4_5_IRQHandler ; DMA1 Channel 4 and Channel 5
DCD ADC1_IRQHandler ; ADC1
DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD TIM14_IRQHandler ; TIM14
DCD 0 ; Reserved
DCD TIM16_IRQHandler ; TIM16
DCD TIM17_IRQHandler ; TIM17
DCD I2C1_IRQHandler ; I2C1
DCD 0 ; Reserved
DCD SPI1_IRQHandler ; SPI1
DCD 0 ; Reserved
DCD USART1_IRQHandler ; USART1
__Vectors_End
__Vectors_Size EQU __Vectors_End - __Vectors
AREA |.text|, CODE, READONLY
; Reset handler routine
Reset_Handler PROC
EXPORT Reset_Handler [WEAK]
IMPORT __main
IMPORT SystemInit
LDR R0, =SystemInit
BLX R0
LDR R0, =__main
BX R0
ENDP
; Dummy Exception Handlers (infinite loops which can be modified)
NMI_Handler PROC
EXPORT NMI_Handler [WEAK]
B .
ENDP
HardFault_Handler\
PROC
EXPORT HardFault_Handler [WEAK]
B .
ENDP
SVC_Handler PROC
EXPORT SVC_Handler [WEAK]
B .
ENDP
PendSV_Handler PROC
EXPORT PendSV_Handler [WEAK]
B .
ENDP
SysTick_Handler PROC
EXPORT SysTick_Handler [WEAK]
B .
ENDP
Default_Handler PROC
EXPORT WWDG_IRQHandler [WEAK]
EXPORT PVD_IRQHandler [WEAK]
EXPORT RTC_IRQHandler [WEAK]
EXPORT FLASH_IRQHandler [WEAK]
EXPORT RCC_IRQHandler [WEAK]
EXPORT EXTI0_1_IRQHandler [WEAK]
EXPORT EXTI2_3_IRQHandler [WEAK]
EXPORT EXTI4_15_IRQHandler [WEAK]
EXPORT DMA1_Channel1_IRQHandler [WEAK]
EXPORT DMA1_Channel2_3_IRQHandler [WEAK]
EXPORT DMA1_Channel4_5_IRQHandler [WEAK]
EXPORT ADC1_IRQHandler [WEAK]
EXPORT TIM1_BRK_UP_TRG_COM_IRQHandler [WEAK]
EXPORT TIM1_CC_IRQHandler [WEAK]
EXPORT TIM2_IRQHandler [WEAK]
EXPORT TIM3_IRQHandler [WEAK]
EXPORT TIM14_IRQHandler [WEAK]
EXPORT TIM16_IRQHandler [WEAK]
EXPORT TIM17_IRQHandler [WEAK]
EXPORT I2C1_IRQHandler [WEAK]
EXPORT SPI1_IRQHandler [WEAK]
EXPORT USART1_IRQHandler [WEAK]
WWDG_IRQHandler
PVD_IRQHandler
RTC_IRQHandler
FLASH_IRQHandler
RCC_IRQHandler
EXTI0_1_IRQHandler
EXTI2_3_IRQHandler
EXTI4_15_IRQHandler
DMA1_Channel1_IRQHandler
DMA1_Channel2_3_IRQHandler
DMA1_Channel4_5_IRQHandler
ADC1_IRQHandler
TIM1_BRK_UP_TRG_COM_IRQHandler
TIM1_CC_IRQHandler
TIM2_IRQHandler
TIM3_IRQHandler
TIM14_IRQHandler
TIM16_IRQHandler
TIM17_IRQHandler
I2C1_IRQHandler
SPI1_IRQHandler
USART1_IRQHandler
B .
ENDP
ALIGN
;*******************************************************************************
; User Stack and Heap initialization
;*******************************************************************************
IF :DEF:__MICROLIB
EXPORT __initial_sp
EXPORT __heap_base
EXPORT __heap_limit
ELSE
IMPORT __use_two_region_memory
EXPORT __user_initial_stackheap
__user_initial_stackheap
LDR R0, = Heap_Mem
LDR R1, =(Stack_Mem + Stack_Size)
LDR R2, = (Heap_Mem + Heap_Size)
LDR R3, = Stack_Mem
BX LR
ALIGN
ENDIF
END
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
|
aegean-odyssey/mpmd_marlin_1.1.x
| 10,030
|
STM32Cube-1.10.1/Projects/STM32F031K6-Nucleo/Examples/FLASH/FLASH_EraseProgram/SW4STM32/startup_stm32f031x6.s
|
/**
******************************************************************************
* @file startup_stm32f031x6.s
* @author MCD Application Team
* @brief STM32F031x4/STM32F031x6 devices vector table for GCC toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M0 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
.syntax unified
.cpu cortex-m0
.fpu softvfp
.thumb
.global g_pfnVectors
.global Default_Handler
/* start address for the initialization values of the .data section.
defined in linker script */
.word _sidata
/* start address for the .data section. defined in linker script */
.word _sdata
/* end address for the .data section. defined in linker script */
.word _edata
/* start address for the .bss section. defined in linker script */
.word _sbss
/* end address for the .bss section. defined in linker script */
.word _ebss
.section .text.Reset_Handler
.weak Reset_Handler
.type Reset_Handler, %function
Reset_Handler:
ldr r0, =_estack
mov sp, r0 /* set stack pointer */
/* Copy the data segment initializers from flash to SRAM */
movs r1, #0
b LoopCopyDataInit
CopyDataInit:
ldr r3, =_sidata
ldr r3, [r3, r1]
str r3, [r0, r1]
adds r1, r1, #4
LoopCopyDataInit:
ldr r0, =_sdata
ldr r3, =_edata
adds r2, r0, r1
cmp r2, r3
bcc CopyDataInit
ldr r2, =_sbss
b LoopFillZerobss
/* Zero fill the bss segment. */
FillZerobss:
movs r3, #0
str r3, [r2]
adds r2, r2, #4
LoopFillZerobss:
ldr r3, = _ebss
cmp r2, r3
bcc FillZerobss
/* Call the clock system intitialization function.*/
bl SystemInit
/* Call static constructors */
bl __libc_init_array
/* Call the application's entry point.*/
bl main
LoopForever:
b LoopForever
.size Reset_Handler, .-Reset_Handler
/**
* @brief This is the code that gets called when the processor receives an
* unexpected interrupt. This simply enters an infinite loop, preserving
* the system state for examination by a debugger.
*
* @param None
* @retval : None
*/
.section .text.Default_Handler,"ax",%progbits
Default_Handler:
Infinite_Loop:
b Infinite_Loop
.size Default_Handler, .-Default_Handler
/******************************************************************************
*
* The minimal vector table for a Cortex M0. Note that the proper constructs
* must be placed on this to ensure that it ends up at physical address
* 0x0000.0000.
*
******************************************************************************/
.section .isr_vector,"a",%progbits
.type g_pfnVectors, %object
.size g_pfnVectors, .-g_pfnVectors
g_pfnVectors:
.word _estack
.word Reset_Handler
.word NMI_Handler
.word HardFault_Handler
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word SVC_Handler
.word 0
.word 0
.word PendSV_Handler
.word SysTick_Handler
.word WWDG_IRQHandler /* Window WatchDog */
.word PVD_IRQHandler /* PVD through EXTI Line detect */
.word RTC_IRQHandler /* RTC through the EXTI line */
.word FLASH_IRQHandler /* FLASH */
.word RCC_IRQHandler /* RCC */
.word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */
.word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */
.word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */
.word 0 /* Reserved */
.word DMA1_Channel1_IRQHandler /* DMA1 Channel 1 */
.word DMA1_Channel2_3_IRQHandler /* DMA1 Channel 2 and Channel 3 */
.word DMA1_Channel4_5_IRQHandler /* DMA1 Channel 4 and Channel 5 */
.word ADC1_IRQHandler /* ADC1 */
.word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */
.word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
.word TIM2_IRQHandler /* TIM2 */
.word TIM3_IRQHandler /* TIM3 */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word TIM14_IRQHandler /* TIM14 */
.word 0 /* Reserved */
.word TIM16_IRQHandler /* TIM16 */
.word TIM17_IRQHandler /* TIM17 */
.word I2C1_IRQHandler /* I2C1 */
.word 0 /* Reserved */
.word SPI1_IRQHandler /* SPI1 */
.word 0 /* Reserved */
.word USART1_IRQHandler /* USART1 */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
/*******************************************************************************
*
* Provide weak aliases for each Exception handler to the Default_Handler.
* As they are weak aliases, any function with the same name will override
* this definition.
*
*******************************************************************************/
.weak NMI_Handler
.thumb_set NMI_Handler,Default_Handler
.weak HardFault_Handler
.thumb_set HardFault_Handler,Default_Handler
.weak SVC_Handler
.thumb_set SVC_Handler,Default_Handler
.weak PendSV_Handler
.thumb_set PendSV_Handler,Default_Handler
.weak SysTick_Handler
.thumb_set SysTick_Handler,Default_Handler
.weak WWDG_IRQHandler
.thumb_set WWDG_IRQHandler,Default_Handler
.weak PVD_IRQHandler
.thumb_set PVD_IRQHandler,Default_Handler
.weak RTC_IRQHandler
.thumb_set RTC_IRQHandler,Default_Handler
.weak FLASH_IRQHandler
.thumb_set FLASH_IRQHandler,Default_Handler
.weak RCC_IRQHandler
.thumb_set RCC_IRQHandler,Default_Handler
.weak EXTI0_1_IRQHandler
.thumb_set EXTI0_1_IRQHandler,Default_Handler
.weak EXTI2_3_IRQHandler
.thumb_set EXTI2_3_IRQHandler,Default_Handler
.weak EXTI4_15_IRQHandler
.thumb_set EXTI4_15_IRQHandler,Default_Handler
.weak DMA1_Channel1_IRQHandler
.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
.weak DMA1_Channel2_3_IRQHandler
.thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler
.weak DMA1_Channel4_5_IRQHandler
.thumb_set DMA1_Channel4_5_IRQHandler,Default_Handler
.weak ADC1_IRQHandler
.thumb_set ADC1_IRQHandler,Default_Handler
.weak TIM1_BRK_UP_TRG_COM_IRQHandler
.thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
.weak TIM1_CC_IRQHandler
.thumb_set TIM1_CC_IRQHandler,Default_Handler
.weak TIM2_IRQHandler
.thumb_set TIM2_IRQHandler,Default_Handler
.weak TIM3_IRQHandler
.thumb_set TIM3_IRQHandler,Default_Handler
.weak TIM14_IRQHandler
.thumb_set TIM14_IRQHandler,Default_Handler
.weak TIM16_IRQHandler
.thumb_set TIM16_IRQHandler,Default_Handler
.weak TIM17_IRQHandler
.thumb_set TIM17_IRQHandler,Default_Handler
.weak I2C1_IRQHandler
.thumb_set I2C1_IRQHandler,Default_Handler
.weak SPI1_IRQHandler
.thumb_set SPI1_IRQHandler,Default_Handler
.weak USART1_IRQHandler
.thumb_set USART1_IRQHandler,Default_Handler
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
aegean-odyssey/mpmd_marlin_1.1.x
| 9,957
|
STM32Cube-1.10.1/Projects/STM32F031K6-Nucleo/Examples/FLASH/FLASH_EraseProgram/EWARM/startup_stm32f031x6.s
|
;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
;* File Name : startup_stm32f031x6.s
;* Author : MCD Application Team
;* Description : STM32F031x4/STM32F031x6 devices vector table for EWARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == __iar_program_start,
;* - Set the vector table entries with the exceptions ISR
;* address,
;* - Branches to main in the C library (which eventually
;* calls main()).
;* After Reset the Cortex-M0 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;*******************************************************************************
;*
;* Redistribution and use in source and binary forms, with or without modification,
;* are permitted provided that the following conditions are met:
;* 1. Redistributions of source code must retain the above copyright notice,
;* this list of conditions and the following disclaimer.
;* 2. Redistributions in binary form must reproduce the above copyright notice,
;* this list of conditions and the following disclaimer in the documentation
;* and/or other materials provided with the distribution.
;* 3. Neither the name of STMicroelectronics nor the names of its contributors
;* may be used to endorse or promote products derived from this software
;* without specific prior written permission.
;*
;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
;*
;*******************************************************************************
;
;
; The modules in this file are included in the libraries, and may be replaced
; by any user-defined modules that define the PUBLIC symbol _program_start or
; a user defined start symbol.
; To override the cstartup defined in the library, simply add your modified
; version to the workbench project.
;
; The vector table is normally located at address 0.
; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
; The name "__vector_table" has special meaning for C-SPY:
; it is where the SP start value is found, and the NVIC vector
; table register (VTOR) is initialized to this address if != 0.
;
; Cortex-M version
;
MODULE ?cstartup
;; Forward declaration of sections.
SECTION CSTACK:DATA:NOROOT(3)
SECTION .intvec:CODE:NOROOT(2)
EXTERN __iar_program_start
EXTERN SystemInit
PUBLIC __vector_table
DATA
__vector_table
DCD sfe(CSTACK)
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window Watchdog
DCD PVD_IRQHandler ; PVD through EXTI Line detect
DCD RTC_IRQHandler ; RTC through EXTI Line
DCD FLASH_IRQHandler ; FLASH
DCD RCC_IRQHandler ; RCC
DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
DCD 0 ; Reserved
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Channel2_3_IRQHandler ; DMA1 Channel 2 and Channel 3
DCD DMA1_Channel4_5_IRQHandler ; DMA1 Channel 4 and Channel 5
DCD ADC1_IRQHandler ; ADC1
DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD TIM14_IRQHandler ; TIM14
DCD 0 ; Reserved
DCD TIM16_IRQHandler ; TIM16
DCD TIM17_IRQHandler ; TIM17
DCD I2C1_IRQHandler ; I2C1
DCD 0 ; Reserved
DCD SPI1_IRQHandler ; SPI1
DCD 0 ; Reserved
DCD USART1_IRQHandler ; USART1
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Default interrupt handlers.
;;
THUMB
PUBWEAK Reset_Handler
SECTION .text:CODE:NOROOT:REORDER(2)
Reset_Handler
LDR R0, =SystemInit
BLX R0
LDR R0, =__iar_program_start
BX R0
PUBWEAK NMI_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
NMI_Handler
B NMI_Handler
PUBWEAK HardFault_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
HardFault_Handler
B HardFault_Handler
PUBWEAK SVC_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
SVC_Handler
B SVC_Handler
PUBWEAK PendSV_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
PendSV_Handler
B PendSV_Handler
PUBWEAK SysTick_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
SysTick_Handler
B SysTick_Handler
PUBWEAK WWDG_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
WWDG_IRQHandler
B WWDG_IRQHandler
PUBWEAK PVD_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
PVD_IRQHandler
B PVD_IRQHandler
PUBWEAK RTC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
RTC_IRQHandler
B RTC_IRQHandler
PUBWEAK FLASH_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
FLASH_IRQHandler
B FLASH_IRQHandler
PUBWEAK RCC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
RCC_IRQHandler
B RCC_IRQHandler
PUBWEAK EXTI0_1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI0_1_IRQHandler
B EXTI0_1_IRQHandler
PUBWEAK EXTI2_3_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI2_3_IRQHandler
B EXTI2_3_IRQHandler
PUBWEAK EXTI4_15_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI4_15_IRQHandler
B EXTI4_15_IRQHandler
PUBWEAK DMA1_Channel1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Channel1_IRQHandler
B DMA1_Channel1_IRQHandler
PUBWEAK DMA1_Channel2_3_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Channel2_3_IRQHandler
B DMA1_Channel2_3_IRQHandler
PUBWEAK DMA1_Channel4_5_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Channel4_5_IRQHandler
B DMA1_Channel4_5_IRQHandler
PUBWEAK ADC1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
ADC1_IRQHandler
B ADC1_IRQHandler
PUBWEAK TIM1_BRK_UP_TRG_COM_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM1_BRK_UP_TRG_COM_IRQHandler
B TIM1_BRK_UP_TRG_COM_IRQHandler
PUBWEAK TIM1_CC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM1_CC_IRQHandler
B TIM1_CC_IRQHandler
PUBWEAK TIM2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM2_IRQHandler
B TIM2_IRQHandler
PUBWEAK TIM3_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM3_IRQHandler
B TIM3_IRQHandler
PUBWEAK TIM14_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM14_IRQHandler
B TIM14_IRQHandler
PUBWEAK TIM16_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM16_IRQHandler
B TIM16_IRQHandler
PUBWEAK TIM17_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM17_IRQHandler
B TIM17_IRQHandler
PUBWEAK I2C1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
I2C1_IRQHandler
B I2C1_IRQHandler
PUBWEAK SPI1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
SPI1_IRQHandler
B SPI1_IRQHandler
PUBWEAK USART1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
USART1_IRQHandler
B USART1_IRQHandler
END
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
|
aegean-odyssey/mpmd_marlin_1.1.x
| 10,336
|
STM32Cube-1.10.1/Projects/STM32F031K6-Nucleo/Examples/ADC/ADC_DMA_Transfer/MDK-ARM/startup_stm32f031x6.s
|
;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
;* File Name : startup_stm32f031x6.s
;* Author : MCD Application Team
;* Description : STM32F031x4/STM32F031x6 devices vector table for MDK-ARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == Reset_Handler
;* - Set the vector table entries with the exceptions ISR address
;* - Branches to __main in the C library (which eventually
;* calls main()).
;* After Reset the CortexM0 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;* <<< Use Configuration Wizard in Context Menu >>>
;*******************************************************************************
;
;* Redistribution and use in source and binary forms, with or without modification,
;* are permitted provided that the following conditions are met:
;* 1. Redistributions of source code must retain the above copyright notice,
;* this list of conditions and the following disclaimer.
;* 2. Redistributions in binary form must reproduce the above copyright notice,
;* this list of conditions and the following disclaimer in the documentation
;* and/or other materials provided with the distribution.
;* 3. Neither the name of STMicroelectronics nor the names of its contributors
;* may be used to endorse or promote products derived from this software
;* without specific prior written permission.
;*
;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
;
;*******************************************************************************
; Amount of memory (in bytes) allocated for Stack
; Tailor this value to your application needs
; <h> Stack Configuration
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Stack_Size EQU 0x400
AREA STACK, NOINIT, READWRITE, ALIGN=3
Stack_Mem SPACE Stack_Size
__initial_sp
; <h> Heap Configuration
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Heap_Size EQU 0x200
AREA HEAP, NOINIT, READWRITE, ALIGN=3
__heap_base
Heap_Mem SPACE Heap_Size
__heap_limit
PRESERVE8
THUMB
; Vector Table Mapped to Address 0 at Reset
AREA RESET, DATA, READONLY
EXPORT __Vectors
EXPORT __Vectors_End
EXPORT __Vectors_Size
__Vectors DCD __initial_sp ; Top of Stack
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window Watchdog
DCD PVD_IRQHandler ; PVD through EXTI Line detect
DCD RTC_IRQHandler ; RTC through EXTI Line
DCD FLASH_IRQHandler ; FLASH
DCD RCC_IRQHandler ; RCC
DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
DCD 0 ; Reserved
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Channel2_3_IRQHandler ; DMA1 Channel 2 and Channel 3
DCD DMA1_Channel4_5_IRQHandler ; DMA1 Channel 4 and Channel 5
DCD ADC1_IRQHandler ; ADC1
DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD TIM14_IRQHandler ; TIM14
DCD 0 ; Reserved
DCD TIM16_IRQHandler ; TIM16
DCD TIM17_IRQHandler ; TIM17
DCD I2C1_IRQHandler ; I2C1
DCD 0 ; Reserved
DCD SPI1_IRQHandler ; SPI1
DCD 0 ; Reserved
DCD USART1_IRQHandler ; USART1
__Vectors_End
__Vectors_Size EQU __Vectors_End - __Vectors
AREA |.text|, CODE, READONLY
; Reset handler routine
Reset_Handler PROC
EXPORT Reset_Handler [WEAK]
IMPORT __main
IMPORT SystemInit
LDR R0, =SystemInit
BLX R0
LDR R0, =__main
BX R0
ENDP
; Dummy Exception Handlers (infinite loops which can be modified)
NMI_Handler PROC
EXPORT NMI_Handler [WEAK]
B .
ENDP
HardFault_Handler\
PROC
EXPORT HardFault_Handler [WEAK]
B .
ENDP
SVC_Handler PROC
EXPORT SVC_Handler [WEAK]
B .
ENDP
PendSV_Handler PROC
EXPORT PendSV_Handler [WEAK]
B .
ENDP
SysTick_Handler PROC
EXPORT SysTick_Handler [WEAK]
B .
ENDP
Default_Handler PROC
EXPORT WWDG_IRQHandler [WEAK]
EXPORT PVD_IRQHandler [WEAK]
EXPORT RTC_IRQHandler [WEAK]
EXPORT FLASH_IRQHandler [WEAK]
EXPORT RCC_IRQHandler [WEAK]
EXPORT EXTI0_1_IRQHandler [WEAK]
EXPORT EXTI2_3_IRQHandler [WEAK]
EXPORT EXTI4_15_IRQHandler [WEAK]
EXPORT DMA1_Channel1_IRQHandler [WEAK]
EXPORT DMA1_Channel2_3_IRQHandler [WEAK]
EXPORT DMA1_Channel4_5_IRQHandler [WEAK]
EXPORT ADC1_IRQHandler [WEAK]
EXPORT TIM1_BRK_UP_TRG_COM_IRQHandler [WEAK]
EXPORT TIM1_CC_IRQHandler [WEAK]
EXPORT TIM2_IRQHandler [WEAK]
EXPORT TIM3_IRQHandler [WEAK]
EXPORT TIM14_IRQHandler [WEAK]
EXPORT TIM16_IRQHandler [WEAK]
EXPORT TIM17_IRQHandler [WEAK]
EXPORT I2C1_IRQHandler [WEAK]
EXPORT SPI1_IRQHandler [WEAK]
EXPORT USART1_IRQHandler [WEAK]
WWDG_IRQHandler
PVD_IRQHandler
RTC_IRQHandler
FLASH_IRQHandler
RCC_IRQHandler
EXTI0_1_IRQHandler
EXTI2_3_IRQHandler
EXTI4_15_IRQHandler
DMA1_Channel1_IRQHandler
DMA1_Channel2_3_IRQHandler
DMA1_Channel4_5_IRQHandler
ADC1_IRQHandler
TIM1_BRK_UP_TRG_COM_IRQHandler
TIM1_CC_IRQHandler
TIM2_IRQHandler
TIM3_IRQHandler
TIM14_IRQHandler
TIM16_IRQHandler
TIM17_IRQHandler
I2C1_IRQHandler
SPI1_IRQHandler
USART1_IRQHandler
B .
ENDP
ALIGN
;*******************************************************************************
; User Stack and Heap initialization
;*******************************************************************************
IF :DEF:__MICROLIB
EXPORT __initial_sp
EXPORT __heap_base
EXPORT __heap_limit
ELSE
IMPORT __use_two_region_memory
EXPORT __user_initial_stackheap
__user_initial_stackheap
LDR R0, = Heap_Mem
LDR R1, =(Stack_Mem + Stack_Size)
LDR R2, = (Heap_Mem + Heap_Size)
LDR R3, = Stack_Mem
BX LR
ALIGN
ENDIF
END
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
|
aegean-odyssey/mpmd_marlin_1.1.x
| 10,030
|
STM32Cube-1.10.1/Projects/STM32F031K6-Nucleo/Examples/ADC/ADC_DMA_Transfer/SW4STM32/startup_stm32f031x6.s
|
/**
******************************************************************************
* @file startup_stm32f031x6.s
* @author MCD Application Team
* @brief STM32F031x4/STM32F031x6 devices vector table for GCC toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M0 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
.syntax unified
.cpu cortex-m0
.fpu softvfp
.thumb
.global g_pfnVectors
.global Default_Handler
/* start address for the initialization values of the .data section.
defined in linker script */
.word _sidata
/* start address for the .data section. defined in linker script */
.word _sdata
/* end address for the .data section. defined in linker script */
.word _edata
/* start address for the .bss section. defined in linker script */
.word _sbss
/* end address for the .bss section. defined in linker script */
.word _ebss
.section .text.Reset_Handler
.weak Reset_Handler
.type Reset_Handler, %function
Reset_Handler:
ldr r0, =_estack
mov sp, r0 /* set stack pointer */
/* Copy the data segment initializers from flash to SRAM */
movs r1, #0
b LoopCopyDataInit
CopyDataInit:
ldr r3, =_sidata
ldr r3, [r3, r1]
str r3, [r0, r1]
adds r1, r1, #4
LoopCopyDataInit:
ldr r0, =_sdata
ldr r3, =_edata
adds r2, r0, r1
cmp r2, r3
bcc CopyDataInit
ldr r2, =_sbss
b LoopFillZerobss
/* Zero fill the bss segment. */
FillZerobss:
movs r3, #0
str r3, [r2]
adds r2, r2, #4
LoopFillZerobss:
ldr r3, = _ebss
cmp r2, r3
bcc FillZerobss
/* Call the clock system intitialization function.*/
bl SystemInit
/* Call static constructors */
bl __libc_init_array
/* Call the application's entry point.*/
bl main
LoopForever:
b LoopForever
.size Reset_Handler, .-Reset_Handler
/**
* @brief This is the code that gets called when the processor receives an
* unexpected interrupt. This simply enters an infinite loop, preserving
* the system state for examination by a debugger.
*
* @param None
* @retval : None
*/
.section .text.Default_Handler,"ax",%progbits
Default_Handler:
Infinite_Loop:
b Infinite_Loop
.size Default_Handler, .-Default_Handler
/******************************************************************************
*
* The minimal vector table for a Cortex M0. Note that the proper constructs
* must be placed on this to ensure that it ends up at physical address
* 0x0000.0000.
*
******************************************************************************/
.section .isr_vector,"a",%progbits
.type g_pfnVectors, %object
.size g_pfnVectors, .-g_pfnVectors
g_pfnVectors:
.word _estack
.word Reset_Handler
.word NMI_Handler
.word HardFault_Handler
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word SVC_Handler
.word 0
.word 0
.word PendSV_Handler
.word SysTick_Handler
.word WWDG_IRQHandler /* Window WatchDog */
.word PVD_IRQHandler /* PVD through EXTI Line detect */
.word RTC_IRQHandler /* RTC through the EXTI line */
.word FLASH_IRQHandler /* FLASH */
.word RCC_IRQHandler /* RCC */
.word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */
.word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */
.word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */
.word 0 /* Reserved */
.word DMA1_Channel1_IRQHandler /* DMA1 Channel 1 */
.word DMA1_Channel2_3_IRQHandler /* DMA1 Channel 2 and Channel 3 */
.word DMA1_Channel4_5_IRQHandler /* DMA1 Channel 4 and Channel 5 */
.word ADC1_IRQHandler /* ADC1 */
.word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */
.word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
.word TIM2_IRQHandler /* TIM2 */
.word TIM3_IRQHandler /* TIM3 */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word TIM14_IRQHandler /* TIM14 */
.word 0 /* Reserved */
.word TIM16_IRQHandler /* TIM16 */
.word TIM17_IRQHandler /* TIM17 */
.word I2C1_IRQHandler /* I2C1 */
.word 0 /* Reserved */
.word SPI1_IRQHandler /* SPI1 */
.word 0 /* Reserved */
.word USART1_IRQHandler /* USART1 */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
/*******************************************************************************
*
* Provide weak aliases for each Exception handler to the Default_Handler.
* As they are weak aliases, any function with the same name will override
* this definition.
*
*******************************************************************************/
.weak NMI_Handler
.thumb_set NMI_Handler,Default_Handler
.weak HardFault_Handler
.thumb_set HardFault_Handler,Default_Handler
.weak SVC_Handler
.thumb_set SVC_Handler,Default_Handler
.weak PendSV_Handler
.thumb_set PendSV_Handler,Default_Handler
.weak SysTick_Handler
.thumb_set SysTick_Handler,Default_Handler
.weak WWDG_IRQHandler
.thumb_set WWDG_IRQHandler,Default_Handler
.weak PVD_IRQHandler
.thumb_set PVD_IRQHandler,Default_Handler
.weak RTC_IRQHandler
.thumb_set RTC_IRQHandler,Default_Handler
.weak FLASH_IRQHandler
.thumb_set FLASH_IRQHandler,Default_Handler
.weak RCC_IRQHandler
.thumb_set RCC_IRQHandler,Default_Handler
.weak EXTI0_1_IRQHandler
.thumb_set EXTI0_1_IRQHandler,Default_Handler
.weak EXTI2_3_IRQHandler
.thumb_set EXTI2_3_IRQHandler,Default_Handler
.weak EXTI4_15_IRQHandler
.thumb_set EXTI4_15_IRQHandler,Default_Handler
.weak DMA1_Channel1_IRQHandler
.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
.weak DMA1_Channel2_3_IRQHandler
.thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler
.weak DMA1_Channel4_5_IRQHandler
.thumb_set DMA1_Channel4_5_IRQHandler,Default_Handler
.weak ADC1_IRQHandler
.thumb_set ADC1_IRQHandler,Default_Handler
.weak TIM1_BRK_UP_TRG_COM_IRQHandler
.thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
.weak TIM1_CC_IRQHandler
.thumb_set TIM1_CC_IRQHandler,Default_Handler
.weak TIM2_IRQHandler
.thumb_set TIM2_IRQHandler,Default_Handler
.weak TIM3_IRQHandler
.thumb_set TIM3_IRQHandler,Default_Handler
.weak TIM14_IRQHandler
.thumb_set TIM14_IRQHandler,Default_Handler
.weak TIM16_IRQHandler
.thumb_set TIM16_IRQHandler,Default_Handler
.weak TIM17_IRQHandler
.thumb_set TIM17_IRQHandler,Default_Handler
.weak I2C1_IRQHandler
.thumb_set I2C1_IRQHandler,Default_Handler
.weak SPI1_IRQHandler
.thumb_set SPI1_IRQHandler,Default_Handler
.weak USART1_IRQHandler
.thumb_set USART1_IRQHandler,Default_Handler
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
aegean-odyssey/mpmd_marlin_1.1.x
| 9,957
|
STM32Cube-1.10.1/Projects/STM32F031K6-Nucleo/Examples/ADC/ADC_DMA_Transfer/EWARM/startup_stm32f031x6.s
|
;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
;* File Name : startup_stm32f031x6.s
;* Author : MCD Application Team
;* Description : STM32F031x4/STM32F031x6 devices vector table for EWARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == __iar_program_start,
;* - Set the vector table entries with the exceptions ISR
;* address,
;* - Branches to main in the C library (which eventually
;* calls main()).
;* After Reset the Cortex-M0 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;*******************************************************************************
;*
;* Redistribution and use in source and binary forms, with or without modification,
;* are permitted provided that the following conditions are met:
;* 1. Redistributions of source code must retain the above copyright notice,
;* this list of conditions and the following disclaimer.
;* 2. Redistributions in binary form must reproduce the above copyright notice,
;* this list of conditions and the following disclaimer in the documentation
;* and/or other materials provided with the distribution.
;* 3. Neither the name of STMicroelectronics nor the names of its contributors
;* may be used to endorse or promote products derived from this software
;* without specific prior written permission.
;*
;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
;*
;*******************************************************************************
;
;
; The modules in this file are included in the libraries, and may be replaced
; by any user-defined modules that define the PUBLIC symbol _program_start or
; a user defined start symbol.
; To override the cstartup defined in the library, simply add your modified
; version to the workbench project.
;
; The vector table is normally located at address 0.
; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
; The name "__vector_table" has special meaning for C-SPY:
; it is where the SP start value is found, and the NVIC vector
; table register (VTOR) is initialized to this address if != 0.
;
; Cortex-M version
;
MODULE ?cstartup
;; Forward declaration of sections.
SECTION CSTACK:DATA:NOROOT(3)
SECTION .intvec:CODE:NOROOT(2)
EXTERN __iar_program_start
EXTERN SystemInit
PUBLIC __vector_table
DATA
__vector_table
DCD sfe(CSTACK)
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window Watchdog
DCD PVD_IRQHandler ; PVD through EXTI Line detect
DCD RTC_IRQHandler ; RTC through EXTI Line
DCD FLASH_IRQHandler ; FLASH
DCD RCC_IRQHandler ; RCC
DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
DCD 0 ; Reserved
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Channel2_3_IRQHandler ; DMA1 Channel 2 and Channel 3
DCD DMA1_Channel4_5_IRQHandler ; DMA1 Channel 4 and Channel 5
DCD ADC1_IRQHandler ; ADC1
DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD TIM14_IRQHandler ; TIM14
DCD 0 ; Reserved
DCD TIM16_IRQHandler ; TIM16
DCD TIM17_IRQHandler ; TIM17
DCD I2C1_IRQHandler ; I2C1
DCD 0 ; Reserved
DCD SPI1_IRQHandler ; SPI1
DCD 0 ; Reserved
DCD USART1_IRQHandler ; USART1
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Default interrupt handlers.
;;
THUMB
PUBWEAK Reset_Handler
SECTION .text:CODE:NOROOT:REORDER(2)
Reset_Handler
LDR R0, =SystemInit
BLX R0
LDR R0, =__iar_program_start
BX R0
PUBWEAK NMI_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
NMI_Handler
B NMI_Handler
PUBWEAK HardFault_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
HardFault_Handler
B HardFault_Handler
PUBWEAK SVC_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
SVC_Handler
B SVC_Handler
PUBWEAK PendSV_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
PendSV_Handler
B PendSV_Handler
PUBWEAK SysTick_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
SysTick_Handler
B SysTick_Handler
PUBWEAK WWDG_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
WWDG_IRQHandler
B WWDG_IRQHandler
PUBWEAK PVD_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
PVD_IRQHandler
B PVD_IRQHandler
PUBWEAK RTC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
RTC_IRQHandler
B RTC_IRQHandler
PUBWEAK FLASH_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
FLASH_IRQHandler
B FLASH_IRQHandler
PUBWEAK RCC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
RCC_IRQHandler
B RCC_IRQHandler
PUBWEAK EXTI0_1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI0_1_IRQHandler
B EXTI0_1_IRQHandler
PUBWEAK EXTI2_3_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI2_3_IRQHandler
B EXTI2_3_IRQHandler
PUBWEAK EXTI4_15_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI4_15_IRQHandler
B EXTI4_15_IRQHandler
PUBWEAK DMA1_Channel1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Channel1_IRQHandler
B DMA1_Channel1_IRQHandler
PUBWEAK DMA1_Channel2_3_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Channel2_3_IRQHandler
B DMA1_Channel2_3_IRQHandler
PUBWEAK DMA1_Channel4_5_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Channel4_5_IRQHandler
B DMA1_Channel4_5_IRQHandler
PUBWEAK ADC1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
ADC1_IRQHandler
B ADC1_IRQHandler
PUBWEAK TIM1_BRK_UP_TRG_COM_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM1_BRK_UP_TRG_COM_IRQHandler
B TIM1_BRK_UP_TRG_COM_IRQHandler
PUBWEAK TIM1_CC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM1_CC_IRQHandler
B TIM1_CC_IRQHandler
PUBWEAK TIM2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM2_IRQHandler
B TIM2_IRQHandler
PUBWEAK TIM3_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM3_IRQHandler
B TIM3_IRQHandler
PUBWEAK TIM14_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM14_IRQHandler
B TIM14_IRQHandler
PUBWEAK TIM16_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM16_IRQHandler
B TIM16_IRQHandler
PUBWEAK TIM17_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM17_IRQHandler
B TIM17_IRQHandler
PUBWEAK I2C1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
I2C1_IRQHandler
B I2C1_IRQHandler
PUBWEAK SPI1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
SPI1_IRQHandler
B SPI1_IRQHandler
PUBWEAK USART1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
USART1_IRQHandler
B USART1_IRQHandler
END
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
|
aegean-odyssey/mpmd_marlin_1.1.x
| 10,336
|
STM32Cube-1.10.1/Projects/STM32F031K6-Nucleo/Demonstrations/Gravitech_4Digits_Counter/MDK-ARM/startup_stm32f031x6.s
|
;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
;* File Name : startup_stm32f031x6.s
;* Author : MCD Application Team
;* Description : STM32F031x4/STM32F031x6 devices vector table for MDK-ARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == Reset_Handler
;* - Set the vector table entries with the exceptions ISR address
;* - Branches to __main in the C library (which eventually
;* calls main()).
;* After Reset the CortexM0 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;* <<< Use Configuration Wizard in Context Menu >>>
;*******************************************************************************
;
;* Redistribution and use in source and binary forms, with or without modification,
;* are permitted provided that the following conditions are met:
;* 1. Redistributions of source code must retain the above copyright notice,
;* this list of conditions and the following disclaimer.
;* 2. Redistributions in binary form must reproduce the above copyright notice,
;* this list of conditions and the following disclaimer in the documentation
;* and/or other materials provided with the distribution.
;* 3. Neither the name of STMicroelectronics nor the names of its contributors
;* may be used to endorse or promote products derived from this software
;* without specific prior written permission.
;*
;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
;
;*******************************************************************************
; Amount of memory (in bytes) allocated for Stack
; Tailor this value to your application needs
; <h> Stack Configuration
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Stack_Size EQU 0x400
AREA STACK, NOINIT, READWRITE, ALIGN=3
Stack_Mem SPACE Stack_Size
__initial_sp
; <h> Heap Configuration
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Heap_Size EQU 0x200
AREA HEAP, NOINIT, READWRITE, ALIGN=3
__heap_base
Heap_Mem SPACE Heap_Size
__heap_limit
PRESERVE8
THUMB
; Vector Table Mapped to Address 0 at Reset
AREA RESET, DATA, READONLY
EXPORT __Vectors
EXPORT __Vectors_End
EXPORT __Vectors_Size
__Vectors DCD __initial_sp ; Top of Stack
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window Watchdog
DCD PVD_IRQHandler ; PVD through EXTI Line detect
DCD RTC_IRQHandler ; RTC through EXTI Line
DCD FLASH_IRQHandler ; FLASH
DCD RCC_IRQHandler ; RCC
DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
DCD 0 ; Reserved
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Channel2_3_IRQHandler ; DMA1 Channel 2 and Channel 3
DCD DMA1_Channel4_5_IRQHandler ; DMA1 Channel 4 and Channel 5
DCD ADC1_IRQHandler ; ADC1
DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD TIM14_IRQHandler ; TIM14
DCD 0 ; Reserved
DCD TIM16_IRQHandler ; TIM16
DCD TIM17_IRQHandler ; TIM17
DCD I2C1_IRQHandler ; I2C1
DCD 0 ; Reserved
DCD SPI1_IRQHandler ; SPI1
DCD 0 ; Reserved
DCD USART1_IRQHandler ; USART1
__Vectors_End
__Vectors_Size EQU __Vectors_End - __Vectors
AREA |.text|, CODE, READONLY
; Reset handler routine
Reset_Handler PROC
EXPORT Reset_Handler [WEAK]
IMPORT __main
IMPORT SystemInit
LDR R0, =SystemInit
BLX R0
LDR R0, =__main
BX R0
ENDP
; Dummy Exception Handlers (infinite loops which can be modified)
NMI_Handler PROC
EXPORT NMI_Handler [WEAK]
B .
ENDP
HardFault_Handler\
PROC
EXPORT HardFault_Handler [WEAK]
B .
ENDP
SVC_Handler PROC
EXPORT SVC_Handler [WEAK]
B .
ENDP
PendSV_Handler PROC
EXPORT PendSV_Handler [WEAK]
B .
ENDP
SysTick_Handler PROC
EXPORT SysTick_Handler [WEAK]
B .
ENDP
Default_Handler PROC
EXPORT WWDG_IRQHandler [WEAK]
EXPORT PVD_IRQHandler [WEAK]
EXPORT RTC_IRQHandler [WEAK]
EXPORT FLASH_IRQHandler [WEAK]
EXPORT RCC_IRQHandler [WEAK]
EXPORT EXTI0_1_IRQHandler [WEAK]
EXPORT EXTI2_3_IRQHandler [WEAK]
EXPORT EXTI4_15_IRQHandler [WEAK]
EXPORT DMA1_Channel1_IRQHandler [WEAK]
EXPORT DMA1_Channel2_3_IRQHandler [WEAK]
EXPORT DMA1_Channel4_5_IRQHandler [WEAK]
EXPORT ADC1_IRQHandler [WEAK]
EXPORT TIM1_BRK_UP_TRG_COM_IRQHandler [WEAK]
EXPORT TIM1_CC_IRQHandler [WEAK]
EXPORT TIM2_IRQHandler [WEAK]
EXPORT TIM3_IRQHandler [WEAK]
EXPORT TIM14_IRQHandler [WEAK]
EXPORT TIM16_IRQHandler [WEAK]
EXPORT TIM17_IRQHandler [WEAK]
EXPORT I2C1_IRQHandler [WEAK]
EXPORT SPI1_IRQHandler [WEAK]
EXPORT USART1_IRQHandler [WEAK]
WWDG_IRQHandler
PVD_IRQHandler
RTC_IRQHandler
FLASH_IRQHandler
RCC_IRQHandler
EXTI0_1_IRQHandler
EXTI2_3_IRQHandler
EXTI4_15_IRQHandler
DMA1_Channel1_IRQHandler
DMA1_Channel2_3_IRQHandler
DMA1_Channel4_5_IRQHandler
ADC1_IRQHandler
TIM1_BRK_UP_TRG_COM_IRQHandler
TIM1_CC_IRQHandler
TIM2_IRQHandler
TIM3_IRQHandler
TIM14_IRQHandler
TIM16_IRQHandler
TIM17_IRQHandler
I2C1_IRQHandler
SPI1_IRQHandler
USART1_IRQHandler
B .
ENDP
ALIGN
;*******************************************************************************
; User Stack and Heap initialization
;*******************************************************************************
IF :DEF:__MICROLIB
EXPORT __initial_sp
EXPORT __heap_base
EXPORT __heap_limit
ELSE
IMPORT __use_two_region_memory
EXPORT __user_initial_stackheap
__user_initial_stackheap
LDR R0, = Heap_Mem
LDR R1, =(Stack_Mem + Stack_Size)
LDR R2, = (Heap_Mem + Heap_Size)
LDR R3, = Stack_Mem
BX LR
ALIGN
ENDIF
END
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
|
aegean-odyssey/mpmd_marlin_1.1.x
| 10,030
|
STM32Cube-1.10.1/Projects/STM32F031K6-Nucleo/Demonstrations/Gravitech_4Digits_Counter/SW4STM32/startup_stm32f031x6.s
|
/**
******************************************************************************
* @file startup_stm32f031x6.s
* @author MCD Application Team
* @brief STM32F031x4/STM32F031x6 devices vector table for GCC toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M0 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
.syntax unified
.cpu cortex-m0
.fpu softvfp
.thumb
.global g_pfnVectors
.global Default_Handler
/* start address for the initialization values of the .data section.
defined in linker script */
.word _sidata
/* start address for the .data section. defined in linker script */
.word _sdata
/* end address for the .data section. defined in linker script */
.word _edata
/* start address for the .bss section. defined in linker script */
.word _sbss
/* end address for the .bss section. defined in linker script */
.word _ebss
.section .text.Reset_Handler
.weak Reset_Handler
.type Reset_Handler, %function
Reset_Handler:
ldr r0, =_estack
mov sp, r0 /* set stack pointer */
/* Copy the data segment initializers from flash to SRAM */
movs r1, #0
b LoopCopyDataInit
CopyDataInit:
ldr r3, =_sidata
ldr r3, [r3, r1]
str r3, [r0, r1]
adds r1, r1, #4
LoopCopyDataInit:
ldr r0, =_sdata
ldr r3, =_edata
adds r2, r0, r1
cmp r2, r3
bcc CopyDataInit
ldr r2, =_sbss
b LoopFillZerobss
/* Zero fill the bss segment. */
FillZerobss:
movs r3, #0
str r3, [r2]
adds r2, r2, #4
LoopFillZerobss:
ldr r3, = _ebss
cmp r2, r3
bcc FillZerobss
/* Call the clock system intitialization function.*/
bl SystemInit
/* Call static constructors */
bl __libc_init_array
/* Call the application's entry point.*/
bl main
LoopForever:
b LoopForever
.size Reset_Handler, .-Reset_Handler
/**
* @brief This is the code that gets called when the processor receives an
* unexpected interrupt. This simply enters an infinite loop, preserving
* the system state for examination by a debugger.
*
* @param None
* @retval : None
*/
.section .text.Default_Handler,"ax",%progbits
Default_Handler:
Infinite_Loop:
b Infinite_Loop
.size Default_Handler, .-Default_Handler
/******************************************************************************
*
* The minimal vector table for a Cortex M0. Note that the proper constructs
* must be placed on this to ensure that it ends up at physical address
* 0x0000.0000.
*
******************************************************************************/
.section .isr_vector,"a",%progbits
.type g_pfnVectors, %object
.size g_pfnVectors, .-g_pfnVectors
g_pfnVectors:
.word _estack
.word Reset_Handler
.word NMI_Handler
.word HardFault_Handler
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word SVC_Handler
.word 0
.word 0
.word PendSV_Handler
.word SysTick_Handler
.word WWDG_IRQHandler /* Window WatchDog */
.word PVD_IRQHandler /* PVD through EXTI Line detect */
.word RTC_IRQHandler /* RTC through the EXTI line */
.word FLASH_IRQHandler /* FLASH */
.word RCC_IRQHandler /* RCC */
.word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */
.word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */
.word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */
.word 0 /* Reserved */
.word DMA1_Channel1_IRQHandler /* DMA1 Channel 1 */
.word DMA1_Channel2_3_IRQHandler /* DMA1 Channel 2 and Channel 3 */
.word DMA1_Channel4_5_IRQHandler /* DMA1 Channel 4 and Channel 5 */
.word ADC1_IRQHandler /* ADC1 */
.word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */
.word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
.word TIM2_IRQHandler /* TIM2 */
.word TIM3_IRQHandler /* TIM3 */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word TIM14_IRQHandler /* TIM14 */
.word 0 /* Reserved */
.word TIM16_IRQHandler /* TIM16 */
.word TIM17_IRQHandler /* TIM17 */
.word I2C1_IRQHandler /* I2C1 */
.word 0 /* Reserved */
.word SPI1_IRQHandler /* SPI1 */
.word 0 /* Reserved */
.word USART1_IRQHandler /* USART1 */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
/*******************************************************************************
*
* Provide weak aliases for each Exception handler to the Default_Handler.
* As they are weak aliases, any function with the same name will override
* this definition.
*
*******************************************************************************/
.weak NMI_Handler
.thumb_set NMI_Handler,Default_Handler
.weak HardFault_Handler
.thumb_set HardFault_Handler,Default_Handler
.weak SVC_Handler
.thumb_set SVC_Handler,Default_Handler
.weak PendSV_Handler
.thumb_set PendSV_Handler,Default_Handler
.weak SysTick_Handler
.thumb_set SysTick_Handler,Default_Handler
.weak WWDG_IRQHandler
.thumb_set WWDG_IRQHandler,Default_Handler
.weak PVD_IRQHandler
.thumb_set PVD_IRQHandler,Default_Handler
.weak RTC_IRQHandler
.thumb_set RTC_IRQHandler,Default_Handler
.weak FLASH_IRQHandler
.thumb_set FLASH_IRQHandler,Default_Handler
.weak RCC_IRQHandler
.thumb_set RCC_IRQHandler,Default_Handler
.weak EXTI0_1_IRQHandler
.thumb_set EXTI0_1_IRQHandler,Default_Handler
.weak EXTI2_3_IRQHandler
.thumb_set EXTI2_3_IRQHandler,Default_Handler
.weak EXTI4_15_IRQHandler
.thumb_set EXTI4_15_IRQHandler,Default_Handler
.weak DMA1_Channel1_IRQHandler
.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
.weak DMA1_Channel2_3_IRQHandler
.thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler
.weak DMA1_Channel4_5_IRQHandler
.thumb_set DMA1_Channel4_5_IRQHandler,Default_Handler
.weak ADC1_IRQHandler
.thumb_set ADC1_IRQHandler,Default_Handler
.weak TIM1_BRK_UP_TRG_COM_IRQHandler
.thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
.weak TIM1_CC_IRQHandler
.thumb_set TIM1_CC_IRQHandler,Default_Handler
.weak TIM2_IRQHandler
.thumb_set TIM2_IRQHandler,Default_Handler
.weak TIM3_IRQHandler
.thumb_set TIM3_IRQHandler,Default_Handler
.weak TIM14_IRQHandler
.thumb_set TIM14_IRQHandler,Default_Handler
.weak TIM16_IRQHandler
.thumb_set TIM16_IRQHandler,Default_Handler
.weak TIM17_IRQHandler
.thumb_set TIM17_IRQHandler,Default_Handler
.weak I2C1_IRQHandler
.thumb_set I2C1_IRQHandler,Default_Handler
.weak SPI1_IRQHandler
.thumb_set SPI1_IRQHandler,Default_Handler
.weak USART1_IRQHandler
.thumb_set USART1_IRQHandler,Default_Handler
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
aegean-odyssey/mpmd_marlin_1.1.x
| 9,957
|
STM32Cube-1.10.1/Projects/STM32F031K6-Nucleo/Demonstrations/Gravitech_4Digits_Counter/EWARM/startup_stm32f031x6.s
|
;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
;* File Name : startup_stm32f031x6.s
;* Author : MCD Application Team
;* Description : STM32F031x4/STM32F031x6 devices vector table for EWARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == __iar_program_start,
;* - Set the vector table entries with the exceptions ISR
;* address,
;* - Branches to main in the C library (which eventually
;* calls main()).
;* After Reset the Cortex-M0 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;*******************************************************************************
;*
;* Redistribution and use in source and binary forms, with or without modification,
;* are permitted provided that the following conditions are met:
;* 1. Redistributions of source code must retain the above copyright notice,
;* this list of conditions and the following disclaimer.
;* 2. Redistributions in binary form must reproduce the above copyright notice,
;* this list of conditions and the following disclaimer in the documentation
;* and/or other materials provided with the distribution.
;* 3. Neither the name of STMicroelectronics nor the names of its contributors
;* may be used to endorse or promote products derived from this software
;* without specific prior written permission.
;*
;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
;*
;*******************************************************************************
;
;
; The modules in this file are included in the libraries, and may be replaced
; by any user-defined modules that define the PUBLIC symbol _program_start or
; a user defined start symbol.
; To override the cstartup defined in the library, simply add your modified
; version to the workbench project.
;
; The vector table is normally located at address 0.
; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
; The name "__vector_table" has special meaning for C-SPY:
; it is where the SP start value is found, and the NVIC vector
; table register (VTOR) is initialized to this address if != 0.
;
; Cortex-M version
;
MODULE ?cstartup
;; Forward declaration of sections.
SECTION CSTACK:DATA:NOROOT(3)
SECTION .intvec:CODE:NOROOT(2)
EXTERN __iar_program_start
EXTERN SystemInit
PUBLIC __vector_table
DATA
__vector_table
DCD sfe(CSTACK)
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window Watchdog
DCD PVD_IRQHandler ; PVD through EXTI Line detect
DCD RTC_IRQHandler ; RTC through EXTI Line
DCD FLASH_IRQHandler ; FLASH
DCD RCC_IRQHandler ; RCC
DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
DCD 0 ; Reserved
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Channel2_3_IRQHandler ; DMA1 Channel 2 and Channel 3
DCD DMA1_Channel4_5_IRQHandler ; DMA1 Channel 4 and Channel 5
DCD ADC1_IRQHandler ; ADC1
DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD TIM14_IRQHandler ; TIM14
DCD 0 ; Reserved
DCD TIM16_IRQHandler ; TIM16
DCD TIM17_IRQHandler ; TIM17
DCD I2C1_IRQHandler ; I2C1
DCD 0 ; Reserved
DCD SPI1_IRQHandler ; SPI1
DCD 0 ; Reserved
DCD USART1_IRQHandler ; USART1
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Default interrupt handlers.
;;
THUMB
PUBWEAK Reset_Handler
SECTION .text:CODE:NOROOT:REORDER(2)
Reset_Handler
LDR R0, =SystemInit
BLX R0
LDR R0, =__iar_program_start
BX R0
PUBWEAK NMI_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
NMI_Handler
B NMI_Handler
PUBWEAK HardFault_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
HardFault_Handler
B HardFault_Handler
PUBWEAK SVC_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
SVC_Handler
B SVC_Handler
PUBWEAK PendSV_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
PendSV_Handler
B PendSV_Handler
PUBWEAK SysTick_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
SysTick_Handler
B SysTick_Handler
PUBWEAK WWDG_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
WWDG_IRQHandler
B WWDG_IRQHandler
PUBWEAK PVD_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
PVD_IRQHandler
B PVD_IRQHandler
PUBWEAK RTC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
RTC_IRQHandler
B RTC_IRQHandler
PUBWEAK FLASH_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
FLASH_IRQHandler
B FLASH_IRQHandler
PUBWEAK RCC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
RCC_IRQHandler
B RCC_IRQHandler
PUBWEAK EXTI0_1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI0_1_IRQHandler
B EXTI0_1_IRQHandler
PUBWEAK EXTI2_3_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI2_3_IRQHandler
B EXTI2_3_IRQHandler
PUBWEAK EXTI4_15_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI4_15_IRQHandler
B EXTI4_15_IRQHandler
PUBWEAK DMA1_Channel1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Channel1_IRQHandler
B DMA1_Channel1_IRQHandler
PUBWEAK DMA1_Channel2_3_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Channel2_3_IRQHandler
B DMA1_Channel2_3_IRQHandler
PUBWEAK DMA1_Channel4_5_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Channel4_5_IRQHandler
B DMA1_Channel4_5_IRQHandler
PUBWEAK ADC1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
ADC1_IRQHandler
B ADC1_IRQHandler
PUBWEAK TIM1_BRK_UP_TRG_COM_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM1_BRK_UP_TRG_COM_IRQHandler
B TIM1_BRK_UP_TRG_COM_IRQHandler
PUBWEAK TIM1_CC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM1_CC_IRQHandler
B TIM1_CC_IRQHandler
PUBWEAK TIM2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM2_IRQHandler
B TIM2_IRQHandler
PUBWEAK TIM3_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM3_IRQHandler
B TIM3_IRQHandler
PUBWEAK TIM14_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM14_IRQHandler
B TIM14_IRQHandler
PUBWEAK TIM16_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM16_IRQHandler
B TIM16_IRQHandler
PUBWEAK TIM17_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM17_IRQHandler
B TIM17_IRQHandler
PUBWEAK I2C1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
I2C1_IRQHandler
B I2C1_IRQHandler
PUBWEAK SPI1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
SPI1_IRQHandler
B SPI1_IRQHandler
PUBWEAK USART1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
USART1_IRQHandler
B USART1_IRQHandler
END
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
|
aegean-odyssey/mpmd_marlin_1.1.x
| 10,337
|
STM32Cube-1.10.1/Projects/STM32F031K6-Nucleo/Templates_LL/MDK-ARM/startup_stm32f031x6.s
|
;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
;* File Name : startup_stm32f031x6.s
;* Author : MCD Application Team
;* Description : STM32F031x4/STM32F031x6 devices vector table for MDK-ARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == Reset_Handler
;* - Set the vector table entries with the exceptions ISR address
;* - Branches to __main in the C library (which eventually
;* calls main()).
;* After Reset the CortexM0 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;* <<< Use Configuration Wizard in Context Menu >>>
;*******************************************************************************
;*
;* Redistribution and use in source and binary forms, with or without modification,
;* are permitted provided that the following conditions are met:
;* 1. Redistributions of source code must retain the above copyright notice,
;* this list of conditions and the following disclaimer.
;* 2. Redistributions in binary form must reproduce the above copyright notice,
;* this list of conditions and the following disclaimer in the documentation
;* and/or other materials provided with the distribution.
;* 3. Neither the name of STMicroelectronics nor the names of its contributors
;* may be used to endorse or promote products derived from this software
;* without specific prior written permission.
;*
;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
;
;*******************************************************************************
; Amount of memory (in bytes) allocated for Stack
; Tailor this value to your application needs
; <h> Stack Configuration
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Stack_Size EQU 0x400
AREA STACK, NOINIT, READWRITE, ALIGN=3
Stack_Mem SPACE Stack_Size
__initial_sp
; <h> Heap Configuration
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Heap_Size EQU 0x200
AREA HEAP, NOINIT, READWRITE, ALIGN=3
__heap_base
Heap_Mem SPACE Heap_Size
__heap_limit
PRESERVE8
THUMB
; Vector Table Mapped to Address 0 at Reset
AREA RESET, DATA, READONLY
EXPORT __Vectors
EXPORT __Vectors_End
EXPORT __Vectors_Size
__Vectors DCD __initial_sp ; Top of Stack
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window Watchdog
DCD PVD_IRQHandler ; PVD through EXTI Line detect
DCD RTC_IRQHandler ; RTC through EXTI Line
DCD FLASH_IRQHandler ; FLASH
DCD RCC_IRQHandler ; RCC
DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
DCD 0 ; Reserved
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Channel2_3_IRQHandler ; DMA1 Channel 2 and Channel 3
DCD DMA1_Channel4_5_IRQHandler ; DMA1 Channel 4 and Channel 5
DCD ADC1_IRQHandler ; ADC1
DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD TIM14_IRQHandler ; TIM14
DCD 0 ; Reserved
DCD TIM16_IRQHandler ; TIM16
DCD TIM17_IRQHandler ; TIM17
DCD I2C1_IRQHandler ; I2C1
DCD 0 ; Reserved
DCD SPI1_IRQHandler ; SPI1
DCD 0 ; Reserved
DCD USART1_IRQHandler ; USART1
__Vectors_End
__Vectors_Size EQU __Vectors_End - __Vectors
AREA |.text|, CODE, READONLY
; Reset handler routine
Reset_Handler PROC
EXPORT Reset_Handler [WEAK]
IMPORT __main
IMPORT SystemInit
LDR R0, =SystemInit
BLX R0
LDR R0, =__main
BX R0
ENDP
; Dummy Exception Handlers (infinite loops which can be modified)
NMI_Handler PROC
EXPORT NMI_Handler [WEAK]
B .
ENDP
HardFault_Handler\
PROC
EXPORT HardFault_Handler [WEAK]
B .
ENDP
SVC_Handler PROC
EXPORT SVC_Handler [WEAK]
B .
ENDP
PendSV_Handler PROC
EXPORT PendSV_Handler [WEAK]
B .
ENDP
SysTick_Handler PROC
EXPORT SysTick_Handler [WEAK]
B .
ENDP
Default_Handler PROC
EXPORT WWDG_IRQHandler [WEAK]
EXPORT PVD_IRQHandler [WEAK]
EXPORT RTC_IRQHandler [WEAK]
EXPORT FLASH_IRQHandler [WEAK]
EXPORT RCC_IRQHandler [WEAK]
EXPORT EXTI0_1_IRQHandler [WEAK]
EXPORT EXTI2_3_IRQHandler [WEAK]
EXPORT EXTI4_15_IRQHandler [WEAK]
EXPORT DMA1_Channel1_IRQHandler [WEAK]
EXPORT DMA1_Channel2_3_IRQHandler [WEAK]
EXPORT DMA1_Channel4_5_IRQHandler [WEAK]
EXPORT ADC1_IRQHandler [WEAK]
EXPORT TIM1_BRK_UP_TRG_COM_IRQHandler [WEAK]
EXPORT TIM1_CC_IRQHandler [WEAK]
EXPORT TIM2_IRQHandler [WEAK]
EXPORT TIM3_IRQHandler [WEAK]
EXPORT TIM14_IRQHandler [WEAK]
EXPORT TIM16_IRQHandler [WEAK]
EXPORT TIM17_IRQHandler [WEAK]
EXPORT I2C1_IRQHandler [WEAK]
EXPORT SPI1_IRQHandler [WEAK]
EXPORT USART1_IRQHandler [WEAK]
WWDG_IRQHandler
PVD_IRQHandler
RTC_IRQHandler
FLASH_IRQHandler
RCC_IRQHandler
EXTI0_1_IRQHandler
EXTI2_3_IRQHandler
EXTI4_15_IRQHandler
DMA1_Channel1_IRQHandler
DMA1_Channel2_3_IRQHandler
DMA1_Channel4_5_IRQHandler
ADC1_IRQHandler
TIM1_BRK_UP_TRG_COM_IRQHandler
TIM1_CC_IRQHandler
TIM2_IRQHandler
TIM3_IRQHandler
TIM14_IRQHandler
TIM16_IRQHandler
TIM17_IRQHandler
I2C1_IRQHandler
SPI1_IRQHandler
USART1_IRQHandler
B .
ENDP
ALIGN
;*******************************************************************************
; User Stack and Heap initialization
;*******************************************************************************
IF :DEF:__MICROLIB
EXPORT __initial_sp
EXPORT __heap_base
EXPORT __heap_limit
ELSE
IMPORT __use_two_region_memory
EXPORT __user_initial_stackheap
__user_initial_stackheap
LDR R0, = Heap_Mem
LDR R1, =(Stack_Mem + Stack_Size)
LDR R2, = (Heap_Mem + Heap_Size)
LDR R3, = Stack_Mem
BX LR
ALIGN
ENDIF
END
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
|
aegean-odyssey/mpmd_marlin_1.1.x
| 10,030
|
STM32Cube-1.10.1/Projects/STM32F031K6-Nucleo/Templates_LL/SW4STM32/startup_stm32f031x6.s
|
/**
******************************************************************************
* @file startup_stm32f031x6.s
* @author MCD Application Team
* @brief STM32F031x4/STM32F031x6 devices vector table for GCC toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M0 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
.syntax unified
.cpu cortex-m0
.fpu softvfp
.thumb
.global g_pfnVectors
.global Default_Handler
/* start address for the initialization values of the .data section.
defined in linker script */
.word _sidata
/* start address for the .data section. defined in linker script */
.word _sdata
/* end address for the .data section. defined in linker script */
.word _edata
/* start address for the .bss section. defined in linker script */
.word _sbss
/* end address for the .bss section. defined in linker script */
.word _ebss
.section .text.Reset_Handler
.weak Reset_Handler
.type Reset_Handler, %function
Reset_Handler:
ldr r0, =_estack
mov sp, r0 /* set stack pointer */
/* Copy the data segment initializers from flash to SRAM */
movs r1, #0
b LoopCopyDataInit
CopyDataInit:
ldr r3, =_sidata
ldr r3, [r3, r1]
str r3, [r0, r1]
adds r1, r1, #4
LoopCopyDataInit:
ldr r0, =_sdata
ldr r3, =_edata
adds r2, r0, r1
cmp r2, r3
bcc CopyDataInit
ldr r2, =_sbss
b LoopFillZerobss
/* Zero fill the bss segment. */
FillZerobss:
movs r3, #0
str r3, [r2]
adds r2, r2, #4
LoopFillZerobss:
ldr r3, = _ebss
cmp r2, r3
bcc FillZerobss
/* Call the clock system intitialization function.*/
bl SystemInit
/* Call static constructors */
bl __libc_init_array
/* Call the application's entry point.*/
bl main
LoopForever:
b LoopForever
.size Reset_Handler, .-Reset_Handler
/**
* @brief This is the code that gets called when the processor receives an
* unexpected interrupt. This simply enters an infinite loop, preserving
* the system state for examination by a debugger.
*
* @param None
* @retval : None
*/
.section .text.Default_Handler,"ax",%progbits
Default_Handler:
Infinite_Loop:
b Infinite_Loop
.size Default_Handler, .-Default_Handler
/******************************************************************************
*
* The minimal vector table for a Cortex M0. Note that the proper constructs
* must be placed on this to ensure that it ends up at physical address
* 0x0000.0000.
*
******************************************************************************/
.section .isr_vector,"a",%progbits
.type g_pfnVectors, %object
.size g_pfnVectors, .-g_pfnVectors
g_pfnVectors:
.word _estack
.word Reset_Handler
.word NMI_Handler
.word HardFault_Handler
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word SVC_Handler
.word 0
.word 0
.word PendSV_Handler
.word SysTick_Handler
.word WWDG_IRQHandler /* Window WatchDog */
.word PVD_IRQHandler /* PVD through EXTI Line detect */
.word RTC_IRQHandler /* RTC through the EXTI line */
.word FLASH_IRQHandler /* FLASH */
.word RCC_IRQHandler /* RCC */
.word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */
.word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */
.word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */
.word 0 /* Reserved */
.word DMA1_Channel1_IRQHandler /* DMA1 Channel 1 */
.word DMA1_Channel2_3_IRQHandler /* DMA1 Channel 2 and Channel 3 */
.word DMA1_Channel4_5_IRQHandler /* DMA1 Channel 4 and Channel 5 */
.word ADC1_IRQHandler /* ADC1 */
.word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */
.word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
.word TIM2_IRQHandler /* TIM2 */
.word TIM3_IRQHandler /* TIM3 */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word TIM14_IRQHandler /* TIM14 */
.word 0 /* Reserved */
.word TIM16_IRQHandler /* TIM16 */
.word TIM17_IRQHandler /* TIM17 */
.word I2C1_IRQHandler /* I2C1 */
.word 0 /* Reserved */
.word SPI1_IRQHandler /* SPI1 */
.word 0 /* Reserved */
.word USART1_IRQHandler /* USART1 */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
/*******************************************************************************
*
* Provide weak aliases for each Exception handler to the Default_Handler.
* As they are weak aliases, any function with the same name will override
* this definition.
*
*******************************************************************************/
.weak NMI_Handler
.thumb_set NMI_Handler,Default_Handler
.weak HardFault_Handler
.thumb_set HardFault_Handler,Default_Handler
.weak SVC_Handler
.thumb_set SVC_Handler,Default_Handler
.weak PendSV_Handler
.thumb_set PendSV_Handler,Default_Handler
.weak SysTick_Handler
.thumb_set SysTick_Handler,Default_Handler
.weak WWDG_IRQHandler
.thumb_set WWDG_IRQHandler,Default_Handler
.weak PVD_IRQHandler
.thumb_set PVD_IRQHandler,Default_Handler
.weak RTC_IRQHandler
.thumb_set RTC_IRQHandler,Default_Handler
.weak FLASH_IRQHandler
.thumb_set FLASH_IRQHandler,Default_Handler
.weak RCC_IRQHandler
.thumb_set RCC_IRQHandler,Default_Handler
.weak EXTI0_1_IRQHandler
.thumb_set EXTI0_1_IRQHandler,Default_Handler
.weak EXTI2_3_IRQHandler
.thumb_set EXTI2_3_IRQHandler,Default_Handler
.weak EXTI4_15_IRQHandler
.thumb_set EXTI4_15_IRQHandler,Default_Handler
.weak DMA1_Channel1_IRQHandler
.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
.weak DMA1_Channel2_3_IRQHandler
.thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler
.weak DMA1_Channel4_5_IRQHandler
.thumb_set DMA1_Channel4_5_IRQHandler,Default_Handler
.weak ADC1_IRQHandler
.thumb_set ADC1_IRQHandler,Default_Handler
.weak TIM1_BRK_UP_TRG_COM_IRQHandler
.thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
.weak TIM1_CC_IRQHandler
.thumb_set TIM1_CC_IRQHandler,Default_Handler
.weak TIM2_IRQHandler
.thumb_set TIM2_IRQHandler,Default_Handler
.weak TIM3_IRQHandler
.thumb_set TIM3_IRQHandler,Default_Handler
.weak TIM14_IRQHandler
.thumb_set TIM14_IRQHandler,Default_Handler
.weak TIM16_IRQHandler
.thumb_set TIM16_IRQHandler,Default_Handler
.weak TIM17_IRQHandler
.thumb_set TIM17_IRQHandler,Default_Handler
.weak I2C1_IRQHandler
.thumb_set I2C1_IRQHandler,Default_Handler
.weak SPI1_IRQHandler
.thumb_set SPI1_IRQHandler,Default_Handler
.weak USART1_IRQHandler
.thumb_set USART1_IRQHandler,Default_Handler
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
aegean-odyssey/mpmd_marlin_1.1.x
| 9,957
|
STM32Cube-1.10.1/Projects/STM32F031K6-Nucleo/Templates_LL/EWARM/startup_stm32f031x6.s
|
;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
;* File Name : startup_stm32f031x6.s
;* Author : MCD Application Team
;* Description : STM32F031x4/STM32F031x6 devices vector table for EWARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == __iar_program_start,
;* - Set the vector table entries with the exceptions ISR
;* address,
;* - Branches to main in the C library (which eventually
;* calls main()).
;* After Reset the Cortex-M0 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;*******************************************************************************
;*
;* Redistribution and use in source and binary forms, with or without modification,
;* are permitted provided that the following conditions are met:
;* 1. Redistributions of source code must retain the above copyright notice,
;* this list of conditions and the following disclaimer.
;* 2. Redistributions in binary form must reproduce the above copyright notice,
;* this list of conditions and the following disclaimer in the documentation
;* and/or other materials provided with the distribution.
;* 3. Neither the name of STMicroelectronics nor the names of its contributors
;* may be used to endorse or promote products derived from this software
;* without specific prior written permission.
;*
;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
;*
;*******************************************************************************
;
;
; The modules in this file are included in the libraries, and may be replaced
; by any user-defined modules that define the PUBLIC symbol _program_start or
; a user defined start symbol.
; To override the cstartup defined in the library, simply add your modified
; version to the workbench project.
;
; The vector table is normally located at address 0.
; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
; The name "__vector_table" has special meaning for C-SPY:
; it is where the SP start value is found, and the NVIC vector
; table register (VTOR) is initialized to this address if != 0.
;
; Cortex-M version
;
MODULE ?cstartup
;; Forward declaration of sections.
SECTION CSTACK:DATA:NOROOT(3)
SECTION .intvec:CODE:NOROOT(2)
EXTERN __iar_program_start
EXTERN SystemInit
PUBLIC __vector_table
DATA
__vector_table
DCD sfe(CSTACK)
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window Watchdog
DCD PVD_IRQHandler ; PVD through EXTI Line detect
DCD RTC_IRQHandler ; RTC through EXTI Line
DCD FLASH_IRQHandler ; FLASH
DCD RCC_IRQHandler ; RCC
DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
DCD 0 ; Reserved
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Channel2_3_IRQHandler ; DMA1 Channel 2 and Channel 3
DCD DMA1_Channel4_5_IRQHandler ; DMA1 Channel 4 and Channel 5
DCD ADC1_IRQHandler ; ADC1
DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD TIM14_IRQHandler ; TIM14
DCD 0 ; Reserved
DCD TIM16_IRQHandler ; TIM16
DCD TIM17_IRQHandler ; TIM17
DCD I2C1_IRQHandler ; I2C1
DCD 0 ; Reserved
DCD SPI1_IRQHandler ; SPI1
DCD 0 ; Reserved
DCD USART1_IRQHandler ; USART1
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Default interrupt handlers.
;;
THUMB
PUBWEAK Reset_Handler
SECTION .text:CODE:NOROOT:REORDER(2)
Reset_Handler
LDR R0, =SystemInit
BLX R0
LDR R0, =__iar_program_start
BX R0
PUBWEAK NMI_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
NMI_Handler
B NMI_Handler
PUBWEAK HardFault_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
HardFault_Handler
B HardFault_Handler
PUBWEAK SVC_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
SVC_Handler
B SVC_Handler
PUBWEAK PendSV_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
PendSV_Handler
B PendSV_Handler
PUBWEAK SysTick_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
SysTick_Handler
B SysTick_Handler
PUBWEAK WWDG_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
WWDG_IRQHandler
B WWDG_IRQHandler
PUBWEAK PVD_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
PVD_IRQHandler
B PVD_IRQHandler
PUBWEAK RTC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
RTC_IRQHandler
B RTC_IRQHandler
PUBWEAK FLASH_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
FLASH_IRQHandler
B FLASH_IRQHandler
PUBWEAK RCC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
RCC_IRQHandler
B RCC_IRQHandler
PUBWEAK EXTI0_1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI0_1_IRQHandler
B EXTI0_1_IRQHandler
PUBWEAK EXTI2_3_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI2_3_IRQHandler
B EXTI2_3_IRQHandler
PUBWEAK EXTI4_15_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI4_15_IRQHandler
B EXTI4_15_IRQHandler
PUBWEAK DMA1_Channel1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Channel1_IRQHandler
B DMA1_Channel1_IRQHandler
PUBWEAK DMA1_Channel2_3_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Channel2_3_IRQHandler
B DMA1_Channel2_3_IRQHandler
PUBWEAK DMA1_Channel4_5_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Channel4_5_IRQHandler
B DMA1_Channel4_5_IRQHandler
PUBWEAK ADC1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
ADC1_IRQHandler
B ADC1_IRQHandler
PUBWEAK TIM1_BRK_UP_TRG_COM_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM1_BRK_UP_TRG_COM_IRQHandler
B TIM1_BRK_UP_TRG_COM_IRQHandler
PUBWEAK TIM1_CC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM1_CC_IRQHandler
B TIM1_CC_IRQHandler
PUBWEAK TIM2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM2_IRQHandler
B TIM2_IRQHandler
PUBWEAK TIM3_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM3_IRQHandler
B TIM3_IRQHandler
PUBWEAK TIM14_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM14_IRQHandler
B TIM14_IRQHandler
PUBWEAK TIM16_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM16_IRQHandler
B TIM16_IRQHandler
PUBWEAK TIM17_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM17_IRQHandler
B TIM17_IRQHandler
PUBWEAK I2C1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
I2C1_IRQHandler
B I2C1_IRQHandler
PUBWEAK SPI1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
SPI1_IRQHandler
B SPI1_IRQHandler
PUBWEAK USART1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
USART1_IRQHandler
B USART1_IRQHandler
END
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
|
aegean-odyssey/mpmd_marlin_1.1.x
| 11,356
|
STM32Cube-1.10.1/Projects/STM32F091RC-Nucleo/Templates/MDK-ARM/startup_stm32f091xc.s
|
;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
;* File Name : startup_stm32f091xc.s
;* Author : MCD Application Team
;* Description : STM32F091xc/STM32F098xc devices vector table for MDK-ARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == Reset_Handler
;* - Set the vector table entries with the exceptions ISR address
;* - Branches to __main in the C library (which eventually
;* calls main()).
;* After Reset the CortexM0 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;* <<< Use Configuration Wizard in Context Menu >>>
;*******************************************************************************
;*
;* Redistribution and use in source and binary forms, with or without modification,
;* are permitted provided that the following conditions are met:
;* 1. Redistributions of source code must retain the above copyright notice,
;* this list of conditions and the following disclaimer.
;* 2. Redistributions in binary form must reproduce the above copyright notice,
;* this list of conditions and the following disclaimer in the documentation
;* and/or other materials provided with the distribution.
;* 3. Neither the name of STMicroelectronics nor the names of its contributors
;* may be used to endorse or promote products derived from this software
;* without specific prior written permission.
;*
;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
;
;*******************************************************************************
; Amount of memory (in bytes) allocated for Stack
; Tailor this value to your application needs
; <h> Stack Configuration
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Stack_Size EQU 0x400
AREA STACK, NOINIT, READWRITE, ALIGN=3
Stack_Mem SPACE Stack_Size
__initial_sp
; <h> Heap Configuration
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Heap_Size EQU 0x200
AREA HEAP, NOINIT, READWRITE, ALIGN=3
__heap_base
Heap_Mem SPACE Heap_Size
__heap_limit
PRESERVE8
THUMB
; Vector Table Mapped to Address 0 at Reset
AREA RESET, DATA, READONLY
EXPORT __Vectors
EXPORT __Vectors_End
EXPORT __Vectors_Size
__Vectors DCD __initial_sp ; Top of Stack
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window Watchdog
DCD PVD_VDDIO2_IRQHandler ; PVD through EXTI Line detect
DCD RTC_IRQHandler ; RTC through EXTI Line
DCD FLASH_IRQHandler ; FLASH
DCD RCC_CRS_IRQHandler ; RCC and CRS
DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
DCD TSC_IRQHandler ; TS
DCD DMA1_Ch1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler ; DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2
DCD DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler ; DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5
DCD ADC1_COMP_IRQHandler ; ADC1, COMP1 and COMP2
DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC
DCD TIM7_IRQHandler ; TIM7
DCD TIM14_IRQHandler ; TIM14
DCD TIM15_IRQHandler ; TIM15
DCD TIM16_IRQHandler ; TIM16
DCD TIM17_IRQHandler ; TIM17
DCD I2C1_IRQHandler ; I2C1
DCD I2C2_IRQHandler ; I2C2
DCD SPI1_IRQHandler ; SPI1
DCD SPI2_IRQHandler ; SPI2
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD USART3_8_IRQHandler ; USART3, USART4, USART5, USART6, USART7, USART8
DCD CEC_CAN_IRQHandler ; CEC and CAN
__Vectors_End
__Vectors_Size EQU __Vectors_End - __Vectors
AREA |.text|, CODE, READONLY
; Reset handler routine
Reset_Handler PROC
EXPORT Reset_Handler [WEAK]
IMPORT __main
IMPORT SystemInit
LDR R0, =SystemInit
BLX R0
LDR R0, =__main
BX R0
ENDP
; Dummy Exception Handlers (infinite loops which can be modified)
NMI_Handler PROC
EXPORT NMI_Handler [WEAK]
B .
ENDP
HardFault_Handler\
PROC
EXPORT HardFault_Handler [WEAK]
B .
ENDP
SVC_Handler PROC
EXPORT SVC_Handler [WEAK]
B .
ENDP
PendSV_Handler PROC
EXPORT PendSV_Handler [WEAK]
B .
ENDP
SysTick_Handler PROC
EXPORT SysTick_Handler [WEAK]
B .
ENDP
Default_Handler PROC
EXPORT WWDG_IRQHandler [WEAK]
EXPORT PVD_VDDIO2_IRQHandler [WEAK]
EXPORT RTC_IRQHandler [WEAK]
EXPORT FLASH_IRQHandler [WEAK]
EXPORT RCC_CRS_IRQHandler [WEAK]
EXPORT EXTI0_1_IRQHandler [WEAK]
EXPORT EXTI2_3_IRQHandler [WEAK]
EXPORT EXTI4_15_IRQHandler [WEAK]
EXPORT TSC_IRQHandler [WEAK]
EXPORT DMA1_Ch1_IRQHandler [WEAK]
EXPORT DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler [WEAK]
EXPORT DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler [WEAK]
EXPORT ADC1_COMP_IRQHandler [WEAK]
EXPORT TIM1_BRK_UP_TRG_COM_IRQHandler [WEAK]
EXPORT TIM1_CC_IRQHandler [WEAK]
EXPORT TIM2_IRQHandler [WEAK]
EXPORT TIM3_IRQHandler [WEAK]
EXPORT TIM6_DAC_IRQHandler [WEAK]
EXPORT TIM7_IRQHandler [WEAK]
EXPORT TIM14_IRQHandler [WEAK]
EXPORT TIM15_IRQHandler [WEAK]
EXPORT TIM16_IRQHandler [WEAK]
EXPORT TIM17_IRQHandler [WEAK]
EXPORT I2C1_IRQHandler [WEAK]
EXPORT I2C2_IRQHandler [WEAK]
EXPORT SPI1_IRQHandler [WEAK]
EXPORT SPI2_IRQHandler [WEAK]
EXPORT USART1_IRQHandler [WEAK]
EXPORT USART2_IRQHandler [WEAK]
EXPORT USART3_8_IRQHandler [WEAK]
EXPORT CEC_CAN_IRQHandler [WEAK]
WWDG_IRQHandler
PVD_VDDIO2_IRQHandler
RTC_IRQHandler
FLASH_IRQHandler
RCC_CRS_IRQHandler
EXTI0_1_IRQHandler
EXTI2_3_IRQHandler
EXTI4_15_IRQHandler
TSC_IRQHandler
DMA1_Ch1_IRQHandler
DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
ADC1_COMP_IRQHandler
TIM1_BRK_UP_TRG_COM_IRQHandler
TIM1_CC_IRQHandler
TIM2_IRQHandler
TIM3_IRQHandler
TIM6_DAC_IRQHandler
TIM7_IRQHandler
TIM14_IRQHandler
TIM15_IRQHandler
TIM16_IRQHandler
TIM17_IRQHandler
I2C1_IRQHandler
I2C2_IRQHandler
SPI1_IRQHandler
SPI2_IRQHandler
USART1_IRQHandler
USART2_IRQHandler
USART3_8_IRQHandler
CEC_CAN_IRQHandler
B .
ENDP
ALIGN
;*******************************************************************************
; User Stack and Heap initialization
;*******************************************************************************
IF :DEF:__MICROLIB
EXPORT __initial_sp
EXPORT __heap_base
EXPORT __heap_limit
ELSE
IMPORT __use_two_region_memory
EXPORT __user_initial_stackheap
__user_initial_stackheap
LDR R0, = Heap_Mem
LDR R1, =(Stack_Mem + Stack_Size)
LDR R2, = (Heap_Mem + Heap_Size)
LDR R3, = Stack_Mem
BX LR
ALIGN
ENDIF
END
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
|
aegean-odyssey/mpmd_marlin_1.1.x
| 10,745
|
STM32Cube-1.10.1/Projects/STM32F091RC-Nucleo/Templates/SW4STM32/startup_stm32f091xc.s
|
/**
******************************************************************************
* @file startup_stm32f091xc.s
* @author MCD Application Team
* @brief STM32F091xC devices vector table for GCC toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M0 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
.syntax unified
.cpu cortex-m0
.fpu softvfp
.thumb
.global g_pfnVectors
.global Default_Handler
/* start address for the initialization values of the .data section.
defined in linker script */
.word _sidata
/* start address for the .data section. defined in linker script */
.word _sdata
/* end address for the .data section. defined in linker script */
.word _edata
/* start address for the .bss section. defined in linker script */
.word _sbss
/* end address for the .bss section. defined in linker script */
.word _ebss
.section .text.Reset_Handler
.weak Reset_Handler
.type Reset_Handler, %function
Reset_Handler:
ldr r0, =_estack
mov sp, r0 /* set stack pointer */
/* Copy the data segment initializers from flash to SRAM */
movs r1, #0
b LoopCopyDataInit
CopyDataInit:
ldr r3, =_sidata
ldr r3, [r3, r1]
str r3, [r0, r1]
adds r1, r1, #4
LoopCopyDataInit:
ldr r0, =_sdata
ldr r3, =_edata
adds r2, r0, r1
cmp r2, r3
bcc CopyDataInit
ldr r2, =_sbss
b LoopFillZerobss
/* Zero fill the bss segment. */
FillZerobss:
movs r3, #0
str r3, [r2]
adds r2, r2, #4
LoopFillZerobss:
ldr r3, = _ebss
cmp r2, r3
bcc FillZerobss
/* Call the clock system intitialization function.*/
bl SystemInit
/* Call static constructors */
bl __libc_init_array
/* Call the application's entry point.*/
bl main
LoopForever:
b LoopForever
.size Reset_Handler, .-Reset_Handler
/**
* @brief This is the code that gets called when the processor receives an
* unexpected interrupt. This simply enters an infinite loop, preserving
* the system state for examination by a debugger.
*
* @param None
* @retval : None
*/
.section .text.Default_Handler,"ax",%progbits
Default_Handler:
Infinite_Loop:
b Infinite_Loop
.size Default_Handler, .-Default_Handler
/******************************************************************************
*
* The minimal vector table for a Cortex M0. Note that the proper constructs
* must be placed on this to ensure that it ends up at physical address
* 0x0000.0000.
*
******************************************************************************/
.section .isr_vector,"a",%progbits
.type g_pfnVectors, %object
.size g_pfnVectors, .-g_pfnVectors
g_pfnVectors:
.word _estack
.word Reset_Handler
.word NMI_Handler
.word HardFault_Handler
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word SVC_Handler
.word 0
.word 0
.word PendSV_Handler
.word SysTick_Handler
.word WWDG_IRQHandler /* Window WatchDog */
.word PVD_VDDIO2_IRQHandler /* PVD and VDDIO2 through EXTI Line detect */
.word RTC_IRQHandler /* RTC through the EXTI line */
.word FLASH_IRQHandler /* FLASH */
.word RCC_CRS_IRQHandler /* RCC and CRS */
.word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */
.word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */
.word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */
.word TSC_IRQHandler /* TSC */
.word DMA1_Ch1_IRQHandler /* DMA1 Channel 1 */
.word DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler /* DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2 */
.word DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler /* DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5 */
.word ADC1_COMP_IRQHandler /* ADC1, COMP1 and COMP2 */
.word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */
.word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
.word TIM2_IRQHandler /* TIM2 */
.word TIM3_IRQHandler /* TIM3 */
.word TIM6_DAC_IRQHandler /* TIM6 and DAC */
.word TIM7_IRQHandler /* TIM7 */
.word TIM14_IRQHandler /* TIM14 */
.word TIM15_IRQHandler /* TIM15 */
.word TIM16_IRQHandler /* TIM16 */
.word TIM17_IRQHandler /* TIM17 */
.word I2C1_IRQHandler /* I2C1 */
.word I2C2_IRQHandler /* I2C2 */
.word SPI1_IRQHandler /* SPI1 */
.word SPI2_IRQHandler /* SPI2 */
.word USART1_IRQHandler /* USART1 */
.word USART2_IRQHandler /* USART2 */
.word USART3_8_IRQHandler /* USART3, USART4, USART5, USART6, USART7, USART8 */
.word CEC_CAN_IRQHandler /* CEC and CAN */
/*******************************************************************************
*
* Provide weak aliases for each Exception handler to the Default_Handler.
* As they are weak aliases, any function with the same name will override
* this definition.
*
*******************************************************************************/
.weak NMI_Handler
.thumb_set NMI_Handler,Default_Handler
.weak HardFault_Handler
.thumb_set HardFault_Handler,Default_Handler
.weak SVC_Handler
.thumb_set SVC_Handler,Default_Handler
.weak PendSV_Handler
.thumb_set PendSV_Handler,Default_Handler
.weak SysTick_Handler
.thumb_set SysTick_Handler,Default_Handler
.weak WWDG_IRQHandler
.thumb_set WWDG_IRQHandler,Default_Handler
.weak PVD_VDDIO2_IRQHandler
.thumb_set PVD_VDDIO2_IRQHandler,Default_Handler
.weak RTC_IRQHandler
.thumb_set RTC_IRQHandler,Default_Handler
.weak FLASH_IRQHandler
.thumb_set FLASH_IRQHandler,Default_Handler
.weak RCC_CRS_IRQHandler
.thumb_set RCC_CRS_IRQHandler,Default_Handler
.weak EXTI0_1_IRQHandler
.thumb_set EXTI0_1_IRQHandler,Default_Handler
.weak EXTI2_3_IRQHandler
.thumb_set EXTI2_3_IRQHandler,Default_Handler
.weak EXTI4_15_IRQHandler
.thumb_set EXTI4_15_IRQHandler,Default_Handler
.weak TSC_IRQHandler
.thumb_set TSC_IRQHandler,Default_Handler
.weak DMA1_Ch1_IRQHandler
.thumb_set DMA1_Ch1_IRQHandler,Default_Handler
.weak DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
.thumb_set DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler,Default_Handler
.weak DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
.thumb_set DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler,Default_Handler
.weak ADC1_COMP_IRQHandler
.thumb_set ADC1_COMP_IRQHandler,Default_Handler
.weak TIM1_BRK_UP_TRG_COM_IRQHandler
.thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
.weak TIM1_CC_IRQHandler
.thumb_set TIM1_CC_IRQHandler,Default_Handler
.weak TIM2_IRQHandler
.thumb_set TIM2_IRQHandler,Default_Handler
.weak TIM3_IRQHandler
.thumb_set TIM3_IRQHandler,Default_Handler
.weak TIM6_DAC_IRQHandler
.thumb_set TIM6_DAC_IRQHandler,Default_Handler
.weak TIM7_IRQHandler
.thumb_set TIM7_IRQHandler,Default_Handler
.weak TIM14_IRQHandler
.thumb_set TIM14_IRQHandler,Default_Handler
.weak TIM15_IRQHandler
.thumb_set TIM15_IRQHandler,Default_Handler
.weak TIM16_IRQHandler
.thumb_set TIM16_IRQHandler,Default_Handler
.weak TIM17_IRQHandler
.thumb_set TIM17_IRQHandler,Default_Handler
.weak I2C1_IRQHandler
.thumb_set I2C1_IRQHandler,Default_Handler
.weak I2C2_IRQHandler
.thumb_set I2C2_IRQHandler,Default_Handler
.weak SPI1_IRQHandler
.thumb_set SPI1_IRQHandler,Default_Handler
.weak SPI2_IRQHandler
.thumb_set SPI2_IRQHandler,Default_Handler
.weak USART1_IRQHandler
.thumb_set USART1_IRQHandler,Default_Handler
.weak USART2_IRQHandler
.thumb_set USART2_IRQHandler,Default_Handler
.weak USART3_8_IRQHandler
.thumb_set USART3_8_IRQHandler,Default_Handler
.weak CEC_CAN_IRQHandler
.thumb_set CEC_CAN_IRQHandler,Default_Handler
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
aegean-odyssey/mpmd_marlin_1.1.x
| 11,410
|
STM32Cube-1.10.1/Projects/STM32F091RC-Nucleo/Templates/EWARM/startup_stm32f091xc.s
|
;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
;* File Name : startup_stm32f091xc.s
;* Author : MCD Application Team
;* Description : STM32F091xc/STM32F098xc devices vector table for EWARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == __iar_program_start,
;* - Set the vector table entries with the exceptions ISR
;* address,
;* - Branches to main in the C library (which eventually
;* calls main()).
;* After Reset the Cortex-M0 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;*******************************************************************************
;*
;* Redistribution and use in source and binary forms, with or without modification,
;* are permitted provided that the following conditions are met:
;* 1. Redistributions of source code must retain the above copyright notice,
;* this list of conditions and the following disclaimer.
;* 2. Redistributions in binary form must reproduce the above copyright notice,
;* this list of conditions and the following disclaimer in the documentation
;* and/or other materials provided with the distribution.
;* 3. Neither the name of STMicroelectronics nor the names of its contributors
;* may be used to endorse or promote products derived from this software
;* without specific prior written permission.
;*
;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
;*
;*******************************************************************************
;
;
; The modules in this file are included in the libraries, and may be replaced
; by any user-defined modules that define the PUBLIC symbol _program_start or
; a user defined start symbol.
; To override the cstartup defined in the library, simply add your modified
; version to the workbench project.
;
; The vector table is normally located at address 0.
; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
; The name "__vector_table" has special meaning for C-SPY:
; it is where the SP start value is found, and the NVIC vector
; table register (VTOR) is initialized to this address if != 0.
;
; Cortex-M version
;
MODULE ?cstartup
;; Forward declaration of sections.
SECTION CSTACK:DATA:NOROOT(3)
SECTION .intvec:CODE:NOROOT(2)
EXTERN __iar_program_start
EXTERN SystemInit
PUBLIC __vector_table
DATA
__vector_table
DCD sfe(CSTACK)
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window Watchdog
DCD PVD_VDDIO2_IRQHandler ; PVD and VDDIO2 through EXTI Line detect
DCD RTC_IRQHandler ; RTC through EXTI Line
DCD FLASH_IRQHandler ; FLASH
DCD RCC_CRS_IRQHandler ; RCC and CRS
DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
DCD TSC_IRQHandler ; TS
DCD DMA1_Ch1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler ; DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2
DCD DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler ; DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5
DCD ADC1_COMP_IRQHandler ; ADC1, COMP1 and COMP2
DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC
DCD TIM7_IRQHandler ; TIM7
DCD TIM14_IRQHandler ; TIM14
DCD TIM15_IRQHandler ; TIM15
DCD TIM16_IRQHandler ; TIM16
DCD TIM17_IRQHandler ; TIM17
DCD I2C1_IRQHandler ; I2C1
DCD I2C2_IRQHandler ; I2C2
DCD SPI1_IRQHandler ; SPI1
DCD SPI2_IRQHandler ; SPI2
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD USART3_8_IRQHandler ; USART3, USART4, USART5, USART6, USART7, USART8
DCD CEC_CAN_IRQHandler ; CEC and CAN
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Default interrupt handlers.
;;
THUMB
PUBWEAK Reset_Handler
SECTION .text:CODE:NOROOT:REORDER(2)
Reset_Handler
LDR R0, =SystemInit
BLX R0
LDR R0, =__iar_program_start
BX R0
PUBWEAK NMI_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
NMI_Handler
B NMI_Handler
PUBWEAK HardFault_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
HardFault_Handler
B HardFault_Handler
PUBWEAK SVC_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
SVC_Handler
B SVC_Handler
PUBWEAK PendSV_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
PendSV_Handler
B PendSV_Handler
PUBWEAK SysTick_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
SysTick_Handler
B SysTick_Handler
PUBWEAK WWDG_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
WWDG_IRQHandler
B WWDG_IRQHandler
PUBWEAK PVD_VDDIO2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
PVD_VDDIO2_IRQHandler
B PVD_VDDIO2_IRQHandler
PUBWEAK RTC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
RTC_IRQHandler
B RTC_IRQHandler
PUBWEAK FLASH_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
FLASH_IRQHandler
B FLASH_IRQHandler
PUBWEAK RCC_CRS_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
RCC_CRS_IRQHandler
B RCC_CRS_IRQHandler
PUBWEAK EXTI0_1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI0_1_IRQHandler
B EXTI0_1_IRQHandler
PUBWEAK EXTI2_3_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI2_3_IRQHandler
B EXTI2_3_IRQHandler
PUBWEAK EXTI4_15_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI4_15_IRQHandler
B EXTI4_15_IRQHandler
PUBWEAK TSC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TSC_IRQHandler
B TSC_IRQHandler
PUBWEAK DMA1_Ch1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Ch1_IRQHandler
B DMA1_Ch1_IRQHandler
PUBWEAK DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
B DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
PUBWEAK DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
B DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
PUBWEAK ADC1_COMP_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
ADC1_COMP_IRQHandler
B ADC1_COMP_IRQHandler
PUBWEAK TIM1_BRK_UP_TRG_COM_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM1_BRK_UP_TRG_COM_IRQHandler
B TIM1_BRK_UP_TRG_COM_IRQHandler
PUBWEAK TIM1_CC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM1_CC_IRQHandler
B TIM1_CC_IRQHandler
PUBWEAK TIM2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM2_IRQHandler
B TIM2_IRQHandler
PUBWEAK TIM3_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM3_IRQHandler
B TIM3_IRQHandler
PUBWEAK TIM6_DAC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM6_DAC_IRQHandler
B TIM6_DAC_IRQHandler
PUBWEAK TIM7_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM7_IRQHandler
B TIM7_IRQHandler
PUBWEAK TIM14_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM14_IRQHandler
B TIM14_IRQHandler
PUBWEAK TIM15_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM15_IRQHandler
B TIM15_IRQHandler
PUBWEAK TIM16_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM16_IRQHandler
B TIM16_IRQHandler
PUBWEAK TIM17_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM17_IRQHandler
B TIM17_IRQHandler
PUBWEAK I2C1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
I2C1_IRQHandler
B I2C1_IRQHandler
PUBWEAK I2C2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
I2C2_IRQHandler
B I2C2_IRQHandler
PUBWEAK SPI1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
SPI1_IRQHandler
B SPI1_IRQHandler
PUBWEAK SPI2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
SPI2_IRQHandler
B SPI2_IRQHandler
PUBWEAK USART1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
USART1_IRQHandler
B USART1_IRQHandler
PUBWEAK USART2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
USART2_IRQHandler
B USART2_IRQHandler
PUBWEAK USART3_8_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
USART3_8_IRQHandler
B USART3_8_IRQHandler
PUBWEAK CEC_CAN_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
CEC_CAN_IRQHandler
B CEC_CAN_IRQHandler
END
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
|
aegean-odyssey/mpmd_marlin_1.1.x
| 11,305
|
STM32Cube-1.10.1/Projects/STM32F091RC-Nucleo/Examples/TIM/TIM_InputCapture/MDK-ARM/startup_stm32f091xc.s
|
;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
;* File Name : startup_stm32f091xc.s
;* Author : MCD Application Team
;* Description : STM32F091xc/STM32F098xc devices vector table for MDK-ARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == Reset_Handler
;* - Set the vector table entries with the exceptions ISR address
;* - Branches to __main in the C library (which eventually
;* calls main()).
;* After Reset the CortexM0 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;*******************************************************************************
;
;* Redistribution and use in source and binary forms, with or without modification,
;* are permitted provided that the following conditions are met:
;* 1. Redistributions of source code must retain the above copyright notice,
;* this list of conditions and the following disclaimer.
;* 2. Redistributions in binary form must reproduce the above copyright notice,
;* this list of conditions and the following disclaimer in the documentation
;* and/or other materials provided with the distribution.
;* 3. Neither the name of STMicroelectronics nor the names of its contributors
;* may be used to endorse or promote products derived from this software
;* without specific prior written permission.
;*
;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
;
;*******************************************************************************
; Amount of memory (in bytes) allocated for Stack
; Tailor this value to your application needs
; <h> Stack Configuration
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Stack_Size EQU 0x400;
AREA STACK, NOINIT, READWRITE, ALIGN=3
Stack_Mem SPACE Stack_Size
__initial_sp
; <h> Heap Configuration
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Heap_Size EQU 0x200;
AREA HEAP, NOINIT, READWRITE, ALIGN=3
__heap_base
Heap_Mem SPACE Heap_Size
__heap_limit
PRESERVE8
THUMB
; Vector Table Mapped to Address 0 at Reset
AREA RESET, DATA, READONLY
EXPORT __Vectors
EXPORT __Vectors_End
EXPORT __Vectors_Size
__Vectors DCD __initial_sp ; Top of Stack
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window Watchdog
DCD PVD_VDDIO2_IRQHandler ; PVD through EXTI Line detect
DCD RTC_IRQHandler ; RTC through EXTI Line
DCD FLASH_IRQHandler ; FLASH
DCD RCC_CRS_IRQHandler ; RCC and CRS
DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
DCD TSC_IRQHandler ; TS
DCD DMA1_Ch1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler ; DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2
DCD DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler ; DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5
DCD ADC1_COMP_IRQHandler ; ADC1, COMP1 and COMP2
DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC
DCD TIM7_IRQHandler ; TIM7
DCD TIM14_IRQHandler ; TIM14
DCD TIM15_IRQHandler ; TIM15
DCD TIM16_IRQHandler ; TIM16
DCD TIM17_IRQHandler ; TIM17
DCD I2C1_IRQHandler ; I2C1
DCD I2C2_IRQHandler ; I2C2
DCD SPI1_IRQHandler ; SPI1
DCD SPI2_IRQHandler ; SPI2
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD USART3_8_IRQHandler ; USART3, USART4, USART5, USART6, USART7, USART8
DCD CEC_CAN_IRQHandler ; CEC and CAN
__Vectors_End
__Vectors_Size EQU __Vectors_End - __Vectors
AREA |.text|, CODE, READONLY
; Reset handler routine
Reset_Handler PROC
EXPORT Reset_Handler [WEAK]
IMPORT __main
IMPORT SystemInit
LDR R0, =SystemInit
BLX R0
LDR R0, =__main
BX R0
ENDP
; Dummy Exception Handlers (infinite loops which can be modified)
NMI_Handler PROC
EXPORT NMI_Handler [WEAK]
B .
ENDP
HardFault_Handler\
PROC
EXPORT HardFault_Handler [WEAK]
B .
ENDP
SVC_Handler PROC
EXPORT SVC_Handler [WEAK]
B .
ENDP
PendSV_Handler PROC
EXPORT PendSV_Handler [WEAK]
B .
ENDP
SysTick_Handler PROC
EXPORT SysTick_Handler [WEAK]
B .
ENDP
Default_Handler PROC
EXPORT WWDG_IRQHandler [WEAK]
EXPORT PVD_VDDIO2_IRQHandler [WEAK]
EXPORT RTC_IRQHandler [WEAK]
EXPORT FLASH_IRQHandler [WEAK]
EXPORT RCC_CRS_IRQHandler [WEAK]
EXPORT EXTI0_1_IRQHandler [WEAK]
EXPORT EXTI2_3_IRQHandler [WEAK]
EXPORT EXTI4_15_IRQHandler [WEAK]
EXPORT TSC_IRQHandler [WEAK]
EXPORT DMA1_Ch1_IRQHandler [WEAK]
EXPORT DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler [WEAK]
EXPORT DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler [WEAK]
EXPORT ADC1_COMP_IRQHandler [WEAK]
EXPORT TIM1_BRK_UP_TRG_COM_IRQHandler [WEAK]
EXPORT TIM1_CC_IRQHandler [WEAK]
EXPORT TIM2_IRQHandler [WEAK]
EXPORT TIM3_IRQHandler [WEAK]
EXPORT TIM6_DAC_IRQHandler [WEAK]
EXPORT TIM7_IRQHandler [WEAK]
EXPORT TIM14_IRQHandler [WEAK]
EXPORT TIM15_IRQHandler [WEAK]
EXPORT TIM16_IRQHandler [WEAK]
EXPORT TIM17_IRQHandler [WEAK]
EXPORT I2C1_IRQHandler [WEAK]
EXPORT I2C2_IRQHandler [WEAK]
EXPORT SPI1_IRQHandler [WEAK]
EXPORT SPI2_IRQHandler [WEAK]
EXPORT USART1_IRQHandler [WEAK]
EXPORT USART2_IRQHandler [WEAK]
EXPORT USART3_8_IRQHandler [WEAK]
EXPORT CEC_CAN_IRQHandler [WEAK]
WWDG_IRQHandler
PVD_VDDIO2_IRQHandler
RTC_IRQHandler
FLASH_IRQHandler
RCC_CRS_IRQHandler
EXTI0_1_IRQHandler
EXTI2_3_IRQHandler
EXTI4_15_IRQHandler
TSC_IRQHandler
DMA1_Ch1_IRQHandler
DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
ADC1_COMP_IRQHandler
TIM1_BRK_UP_TRG_COM_IRQHandler
TIM1_CC_IRQHandler
TIM2_IRQHandler
TIM3_IRQHandler
TIM6_DAC_IRQHandler
TIM7_IRQHandler
TIM14_IRQHandler
TIM15_IRQHandler
TIM16_IRQHandler
TIM17_IRQHandler
I2C1_IRQHandler
I2C2_IRQHandler
SPI1_IRQHandler
SPI2_IRQHandler
USART1_IRQHandler
USART2_IRQHandler
USART3_8_IRQHandler
CEC_CAN_IRQHandler
B .
ENDP
ALIGN
;*******************************************************************************
; User Stack and Heap initialization
;*******************************************************************************
IF :DEF:__MICROLIB
EXPORT __initial_sp
EXPORT __heap_base
EXPORT __heap_limit
ELSE
IMPORT __use_two_region_memory
EXPORT __user_initial_stackheap
__user_initial_stackheap
LDR R0, = Heap_Mem
LDR R1, =(Stack_Mem + Stack_Size)
LDR R2, = (Heap_Mem + Heap_Size)
LDR R3, = Stack_Mem
BX LR
ALIGN
ENDIF
END
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
|
aegean-odyssey/mpmd_marlin_1.1.x
| 10,745
|
STM32Cube-1.10.1/Projects/STM32F091RC-Nucleo/Examples/TIM/TIM_InputCapture/SW4STM32/startup_stm32f091xc.s
|
/**
******************************************************************************
* @file startup_stm32f091xc.s
* @author MCD Application Team
* @brief STM32F091xC devices vector table for GCC toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M0 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
.syntax unified
.cpu cortex-m0
.fpu softvfp
.thumb
.global g_pfnVectors
.global Default_Handler
/* start address for the initialization values of the .data section.
defined in linker script */
.word _sidata
/* start address for the .data section. defined in linker script */
.word _sdata
/* end address for the .data section. defined in linker script */
.word _edata
/* start address for the .bss section. defined in linker script */
.word _sbss
/* end address for the .bss section. defined in linker script */
.word _ebss
.section .text.Reset_Handler
.weak Reset_Handler
.type Reset_Handler, %function
Reset_Handler:
ldr r0, =_estack
mov sp, r0 /* set stack pointer */
/* Copy the data segment initializers from flash to SRAM */
movs r1, #0
b LoopCopyDataInit
CopyDataInit:
ldr r3, =_sidata
ldr r3, [r3, r1]
str r3, [r0, r1]
adds r1, r1, #4
LoopCopyDataInit:
ldr r0, =_sdata
ldr r3, =_edata
adds r2, r0, r1
cmp r2, r3
bcc CopyDataInit
ldr r2, =_sbss
b LoopFillZerobss
/* Zero fill the bss segment. */
FillZerobss:
movs r3, #0
str r3, [r2]
adds r2, r2, #4
LoopFillZerobss:
ldr r3, = _ebss
cmp r2, r3
bcc FillZerobss
/* Call the clock system intitialization function.*/
bl SystemInit
/* Call static constructors */
bl __libc_init_array
/* Call the application's entry point.*/
bl main
LoopForever:
b LoopForever
.size Reset_Handler, .-Reset_Handler
/**
* @brief This is the code that gets called when the processor receives an
* unexpected interrupt. This simply enters an infinite loop, preserving
* the system state for examination by a debugger.
*
* @param None
* @retval : None
*/
.section .text.Default_Handler,"ax",%progbits
Default_Handler:
Infinite_Loop:
b Infinite_Loop
.size Default_Handler, .-Default_Handler
/******************************************************************************
*
* The minimal vector table for a Cortex M0. Note that the proper constructs
* must be placed on this to ensure that it ends up at physical address
* 0x0000.0000.
*
******************************************************************************/
.section .isr_vector,"a",%progbits
.type g_pfnVectors, %object
.size g_pfnVectors, .-g_pfnVectors
g_pfnVectors:
.word _estack
.word Reset_Handler
.word NMI_Handler
.word HardFault_Handler
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word SVC_Handler
.word 0
.word 0
.word PendSV_Handler
.word SysTick_Handler
.word WWDG_IRQHandler /* Window WatchDog */
.word PVD_VDDIO2_IRQHandler /* PVD and VDDIO2 through EXTI Line detect */
.word RTC_IRQHandler /* RTC through the EXTI line */
.word FLASH_IRQHandler /* FLASH */
.word RCC_CRS_IRQHandler /* RCC and CRS */
.word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */
.word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */
.word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */
.word TSC_IRQHandler /* TSC */
.word DMA1_Ch1_IRQHandler /* DMA1 Channel 1 */
.word DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler /* DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2 */
.word DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler /* DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5 */
.word ADC1_COMP_IRQHandler /* ADC1, COMP1 and COMP2 */
.word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */
.word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
.word TIM2_IRQHandler /* TIM2 */
.word TIM3_IRQHandler /* TIM3 */
.word TIM6_DAC_IRQHandler /* TIM6 and DAC */
.word TIM7_IRQHandler /* TIM7 */
.word TIM14_IRQHandler /* TIM14 */
.word TIM15_IRQHandler /* TIM15 */
.word TIM16_IRQHandler /* TIM16 */
.word TIM17_IRQHandler /* TIM17 */
.word I2C1_IRQHandler /* I2C1 */
.word I2C2_IRQHandler /* I2C2 */
.word SPI1_IRQHandler /* SPI1 */
.word SPI2_IRQHandler /* SPI2 */
.word USART1_IRQHandler /* USART1 */
.word USART2_IRQHandler /* USART2 */
.word USART3_8_IRQHandler /* USART3, USART4, USART5, USART6, USART7, USART8 */
.word CEC_CAN_IRQHandler /* CEC and CAN */
/*******************************************************************************
*
* Provide weak aliases for each Exception handler to the Default_Handler.
* As they are weak aliases, any function with the same name will override
* this definition.
*
*******************************************************************************/
.weak NMI_Handler
.thumb_set NMI_Handler,Default_Handler
.weak HardFault_Handler
.thumb_set HardFault_Handler,Default_Handler
.weak SVC_Handler
.thumb_set SVC_Handler,Default_Handler
.weak PendSV_Handler
.thumb_set PendSV_Handler,Default_Handler
.weak SysTick_Handler
.thumb_set SysTick_Handler,Default_Handler
.weak WWDG_IRQHandler
.thumb_set WWDG_IRQHandler,Default_Handler
.weak PVD_VDDIO2_IRQHandler
.thumb_set PVD_VDDIO2_IRQHandler,Default_Handler
.weak RTC_IRQHandler
.thumb_set RTC_IRQHandler,Default_Handler
.weak FLASH_IRQHandler
.thumb_set FLASH_IRQHandler,Default_Handler
.weak RCC_CRS_IRQHandler
.thumb_set RCC_CRS_IRQHandler,Default_Handler
.weak EXTI0_1_IRQHandler
.thumb_set EXTI0_1_IRQHandler,Default_Handler
.weak EXTI2_3_IRQHandler
.thumb_set EXTI2_3_IRQHandler,Default_Handler
.weak EXTI4_15_IRQHandler
.thumb_set EXTI4_15_IRQHandler,Default_Handler
.weak TSC_IRQHandler
.thumb_set TSC_IRQHandler,Default_Handler
.weak DMA1_Ch1_IRQHandler
.thumb_set DMA1_Ch1_IRQHandler,Default_Handler
.weak DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
.thumb_set DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler,Default_Handler
.weak DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
.thumb_set DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler,Default_Handler
.weak ADC1_COMP_IRQHandler
.thumb_set ADC1_COMP_IRQHandler,Default_Handler
.weak TIM1_BRK_UP_TRG_COM_IRQHandler
.thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
.weak TIM1_CC_IRQHandler
.thumb_set TIM1_CC_IRQHandler,Default_Handler
.weak TIM2_IRQHandler
.thumb_set TIM2_IRQHandler,Default_Handler
.weak TIM3_IRQHandler
.thumb_set TIM3_IRQHandler,Default_Handler
.weak TIM6_DAC_IRQHandler
.thumb_set TIM6_DAC_IRQHandler,Default_Handler
.weak TIM7_IRQHandler
.thumb_set TIM7_IRQHandler,Default_Handler
.weak TIM14_IRQHandler
.thumb_set TIM14_IRQHandler,Default_Handler
.weak TIM15_IRQHandler
.thumb_set TIM15_IRQHandler,Default_Handler
.weak TIM16_IRQHandler
.thumb_set TIM16_IRQHandler,Default_Handler
.weak TIM17_IRQHandler
.thumb_set TIM17_IRQHandler,Default_Handler
.weak I2C1_IRQHandler
.thumb_set I2C1_IRQHandler,Default_Handler
.weak I2C2_IRQHandler
.thumb_set I2C2_IRQHandler,Default_Handler
.weak SPI1_IRQHandler
.thumb_set SPI1_IRQHandler,Default_Handler
.weak SPI2_IRQHandler
.thumb_set SPI2_IRQHandler,Default_Handler
.weak USART1_IRQHandler
.thumb_set USART1_IRQHandler,Default_Handler
.weak USART2_IRQHandler
.thumb_set USART2_IRQHandler,Default_Handler
.weak USART3_8_IRQHandler
.thumb_set USART3_8_IRQHandler,Default_Handler
.weak CEC_CAN_IRQHandler
.thumb_set CEC_CAN_IRQHandler,Default_Handler
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
aegean-odyssey/mpmd_marlin_1.1.x
| 11,410
|
STM32Cube-1.10.1/Projects/STM32F091RC-Nucleo/Examples/TIM/TIM_InputCapture/EWARM/startup_stm32f091xc.s
|
;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
;* File Name : startup_stm32f091xc.s
;* Author : MCD Application Team
;* Description : STM32F091xc/STM32F098xc devices vector table for EWARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == __iar_program_start,
;* - Set the vector table entries with the exceptions ISR
;* address,
;* - Branches to main in the C library (which eventually
;* calls main()).
;* After Reset the Cortex-M0 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;*******************************************************************************
;*
;* Redistribution and use in source and binary forms, with or without modification,
;* are permitted provided that the following conditions are met:
;* 1. Redistributions of source code must retain the above copyright notice,
;* this list of conditions and the following disclaimer.
;* 2. Redistributions in binary form must reproduce the above copyright notice,
;* this list of conditions and the following disclaimer in the documentation
;* and/or other materials provided with the distribution.
;* 3. Neither the name of STMicroelectronics nor the names of its contributors
;* may be used to endorse or promote products derived from this software
;* without specific prior written permission.
;*
;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
;*
;*******************************************************************************
;
;
; The modules in this file are included in the libraries, and may be replaced
; by any user-defined modules that define the PUBLIC symbol _program_start or
; a user defined start symbol.
; To override the cstartup defined in the library, simply add your modified
; version to the workbench project.
;
; The vector table is normally located at address 0.
; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
; The name "__vector_table" has special meaning for C-SPY:
; it is where the SP start value is found, and the NVIC vector
; table register (VTOR) is initialized to this address if != 0.
;
; Cortex-M version
;
MODULE ?cstartup
;; Forward declaration of sections.
SECTION CSTACK:DATA:NOROOT(3)
SECTION .intvec:CODE:NOROOT(2)
EXTERN __iar_program_start
EXTERN SystemInit
PUBLIC __vector_table
DATA
__vector_table
DCD sfe(CSTACK)
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window Watchdog
DCD PVD_VDDIO2_IRQHandler ; PVD and VDDIO2 through EXTI Line detect
DCD RTC_IRQHandler ; RTC through EXTI Line
DCD FLASH_IRQHandler ; FLASH
DCD RCC_CRS_IRQHandler ; RCC and CRS
DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
DCD TSC_IRQHandler ; TS
DCD DMA1_Ch1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler ; DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2
DCD DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler ; DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5
DCD ADC1_COMP_IRQHandler ; ADC1, COMP1 and COMP2
DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC
DCD TIM7_IRQHandler ; TIM7
DCD TIM14_IRQHandler ; TIM14
DCD TIM15_IRQHandler ; TIM15
DCD TIM16_IRQHandler ; TIM16
DCD TIM17_IRQHandler ; TIM17
DCD I2C1_IRQHandler ; I2C1
DCD I2C2_IRQHandler ; I2C2
DCD SPI1_IRQHandler ; SPI1
DCD SPI2_IRQHandler ; SPI2
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD USART3_8_IRQHandler ; USART3, USART4, USART5, USART6, USART7, USART8
DCD CEC_CAN_IRQHandler ; CEC and CAN
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Default interrupt handlers.
;;
THUMB
PUBWEAK Reset_Handler
SECTION .text:CODE:NOROOT:REORDER(2)
Reset_Handler
LDR R0, =SystemInit
BLX R0
LDR R0, =__iar_program_start
BX R0
PUBWEAK NMI_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
NMI_Handler
B NMI_Handler
PUBWEAK HardFault_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
HardFault_Handler
B HardFault_Handler
PUBWEAK SVC_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
SVC_Handler
B SVC_Handler
PUBWEAK PendSV_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
PendSV_Handler
B PendSV_Handler
PUBWEAK SysTick_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
SysTick_Handler
B SysTick_Handler
PUBWEAK WWDG_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
WWDG_IRQHandler
B WWDG_IRQHandler
PUBWEAK PVD_VDDIO2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
PVD_VDDIO2_IRQHandler
B PVD_VDDIO2_IRQHandler
PUBWEAK RTC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
RTC_IRQHandler
B RTC_IRQHandler
PUBWEAK FLASH_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
FLASH_IRQHandler
B FLASH_IRQHandler
PUBWEAK RCC_CRS_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
RCC_CRS_IRQHandler
B RCC_CRS_IRQHandler
PUBWEAK EXTI0_1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI0_1_IRQHandler
B EXTI0_1_IRQHandler
PUBWEAK EXTI2_3_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI2_3_IRQHandler
B EXTI2_3_IRQHandler
PUBWEAK EXTI4_15_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI4_15_IRQHandler
B EXTI4_15_IRQHandler
PUBWEAK TSC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TSC_IRQHandler
B TSC_IRQHandler
PUBWEAK DMA1_Ch1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Ch1_IRQHandler
B DMA1_Ch1_IRQHandler
PUBWEAK DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
B DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
PUBWEAK DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
B DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
PUBWEAK ADC1_COMP_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
ADC1_COMP_IRQHandler
B ADC1_COMP_IRQHandler
PUBWEAK TIM1_BRK_UP_TRG_COM_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM1_BRK_UP_TRG_COM_IRQHandler
B TIM1_BRK_UP_TRG_COM_IRQHandler
PUBWEAK TIM1_CC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM1_CC_IRQHandler
B TIM1_CC_IRQHandler
PUBWEAK TIM2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM2_IRQHandler
B TIM2_IRQHandler
PUBWEAK TIM3_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM3_IRQHandler
B TIM3_IRQHandler
PUBWEAK TIM6_DAC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM6_DAC_IRQHandler
B TIM6_DAC_IRQHandler
PUBWEAK TIM7_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM7_IRQHandler
B TIM7_IRQHandler
PUBWEAK TIM14_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM14_IRQHandler
B TIM14_IRQHandler
PUBWEAK TIM15_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM15_IRQHandler
B TIM15_IRQHandler
PUBWEAK TIM16_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM16_IRQHandler
B TIM16_IRQHandler
PUBWEAK TIM17_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM17_IRQHandler
B TIM17_IRQHandler
PUBWEAK I2C1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
I2C1_IRQHandler
B I2C1_IRQHandler
PUBWEAK I2C2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
I2C2_IRQHandler
B I2C2_IRQHandler
PUBWEAK SPI1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
SPI1_IRQHandler
B SPI1_IRQHandler
PUBWEAK SPI2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
SPI2_IRQHandler
B SPI2_IRQHandler
PUBWEAK USART1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
USART1_IRQHandler
B USART1_IRQHandler
PUBWEAK USART2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
USART2_IRQHandler
B USART2_IRQHandler
PUBWEAK USART3_8_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
USART3_8_IRQHandler
B USART3_8_IRQHandler
PUBWEAK CEC_CAN_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
CEC_CAN_IRQHandler
B CEC_CAN_IRQHandler
END
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
|
aegean-odyssey/mpmd_marlin_1.1.x
| 11,305
|
STM32Cube-1.10.1/Projects/STM32F091RC-Nucleo/Examples/TIM/TIM_PWMOutput/MDK-ARM/startup_stm32f091xc.s
|
;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
;* File Name : startup_stm32f091xc.s
;* Author : MCD Application Team
;* Description : STM32F091xc/STM32F098xc devices vector table for MDK-ARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == Reset_Handler
;* - Set the vector table entries with the exceptions ISR address
;* - Branches to __main in the C library (which eventually
;* calls main()).
;* After Reset the CortexM0 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;*******************************************************************************
;
;* Redistribution and use in source and binary forms, with or without modification,
;* are permitted provided that the following conditions are met:
;* 1. Redistributions of source code must retain the above copyright notice,
;* this list of conditions and the following disclaimer.
;* 2. Redistributions in binary form must reproduce the above copyright notice,
;* this list of conditions and the following disclaimer in the documentation
;* and/or other materials provided with the distribution.
;* 3. Neither the name of STMicroelectronics nor the names of its contributors
;* may be used to endorse or promote products derived from this software
;* without specific prior written permission.
;*
;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
;
;*******************************************************************************
; Amount of memory (in bytes) allocated for Stack
; Tailor this value to your application needs
; <h> Stack Configuration
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Stack_Size EQU 0x400;
AREA STACK, NOINIT, READWRITE, ALIGN=3
Stack_Mem SPACE Stack_Size
__initial_sp
; <h> Heap Configuration
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Heap_Size EQU 0x200;
AREA HEAP, NOINIT, READWRITE, ALIGN=3
__heap_base
Heap_Mem SPACE Heap_Size
__heap_limit
PRESERVE8
THUMB
; Vector Table Mapped to Address 0 at Reset
AREA RESET, DATA, READONLY
EXPORT __Vectors
EXPORT __Vectors_End
EXPORT __Vectors_Size
__Vectors DCD __initial_sp ; Top of Stack
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window Watchdog
DCD PVD_VDDIO2_IRQHandler ; PVD through EXTI Line detect
DCD RTC_IRQHandler ; RTC through EXTI Line
DCD FLASH_IRQHandler ; FLASH
DCD RCC_CRS_IRQHandler ; RCC and CRS
DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
DCD TSC_IRQHandler ; TS
DCD DMA1_Ch1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler ; DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2
DCD DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler ; DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5
DCD ADC1_COMP_IRQHandler ; ADC1, COMP1 and COMP2
DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC
DCD TIM7_IRQHandler ; TIM7
DCD TIM14_IRQHandler ; TIM14
DCD TIM15_IRQHandler ; TIM15
DCD TIM16_IRQHandler ; TIM16
DCD TIM17_IRQHandler ; TIM17
DCD I2C1_IRQHandler ; I2C1
DCD I2C2_IRQHandler ; I2C2
DCD SPI1_IRQHandler ; SPI1
DCD SPI2_IRQHandler ; SPI2
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD USART3_8_IRQHandler ; USART3, USART4, USART5, USART6, USART7, USART8
DCD CEC_CAN_IRQHandler ; CEC and CAN
__Vectors_End
__Vectors_Size EQU __Vectors_End - __Vectors
AREA |.text|, CODE, READONLY
; Reset handler routine
Reset_Handler PROC
EXPORT Reset_Handler [WEAK]
IMPORT __main
IMPORT SystemInit
LDR R0, =SystemInit
BLX R0
LDR R0, =__main
BX R0
ENDP
; Dummy Exception Handlers (infinite loops which can be modified)
NMI_Handler PROC
EXPORT NMI_Handler [WEAK]
B .
ENDP
HardFault_Handler\
PROC
EXPORT HardFault_Handler [WEAK]
B .
ENDP
SVC_Handler PROC
EXPORT SVC_Handler [WEAK]
B .
ENDP
PendSV_Handler PROC
EXPORT PendSV_Handler [WEAK]
B .
ENDP
SysTick_Handler PROC
EXPORT SysTick_Handler [WEAK]
B .
ENDP
Default_Handler PROC
EXPORT WWDG_IRQHandler [WEAK]
EXPORT PVD_VDDIO2_IRQHandler [WEAK]
EXPORT RTC_IRQHandler [WEAK]
EXPORT FLASH_IRQHandler [WEAK]
EXPORT RCC_CRS_IRQHandler [WEAK]
EXPORT EXTI0_1_IRQHandler [WEAK]
EXPORT EXTI2_3_IRQHandler [WEAK]
EXPORT EXTI4_15_IRQHandler [WEAK]
EXPORT TSC_IRQHandler [WEAK]
EXPORT DMA1_Ch1_IRQHandler [WEAK]
EXPORT DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler [WEAK]
EXPORT DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler [WEAK]
EXPORT ADC1_COMP_IRQHandler [WEAK]
EXPORT TIM1_BRK_UP_TRG_COM_IRQHandler [WEAK]
EXPORT TIM1_CC_IRQHandler [WEAK]
EXPORT TIM2_IRQHandler [WEAK]
EXPORT TIM3_IRQHandler [WEAK]
EXPORT TIM6_DAC_IRQHandler [WEAK]
EXPORT TIM7_IRQHandler [WEAK]
EXPORT TIM14_IRQHandler [WEAK]
EXPORT TIM15_IRQHandler [WEAK]
EXPORT TIM16_IRQHandler [WEAK]
EXPORT TIM17_IRQHandler [WEAK]
EXPORT I2C1_IRQHandler [WEAK]
EXPORT I2C2_IRQHandler [WEAK]
EXPORT SPI1_IRQHandler [WEAK]
EXPORT SPI2_IRQHandler [WEAK]
EXPORT USART1_IRQHandler [WEAK]
EXPORT USART2_IRQHandler [WEAK]
EXPORT USART3_8_IRQHandler [WEAK]
EXPORT CEC_CAN_IRQHandler [WEAK]
WWDG_IRQHandler
PVD_VDDIO2_IRQHandler
RTC_IRQHandler
FLASH_IRQHandler
RCC_CRS_IRQHandler
EXTI0_1_IRQHandler
EXTI2_3_IRQHandler
EXTI4_15_IRQHandler
TSC_IRQHandler
DMA1_Ch1_IRQHandler
DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
ADC1_COMP_IRQHandler
TIM1_BRK_UP_TRG_COM_IRQHandler
TIM1_CC_IRQHandler
TIM2_IRQHandler
TIM3_IRQHandler
TIM6_DAC_IRQHandler
TIM7_IRQHandler
TIM14_IRQHandler
TIM15_IRQHandler
TIM16_IRQHandler
TIM17_IRQHandler
I2C1_IRQHandler
I2C2_IRQHandler
SPI1_IRQHandler
SPI2_IRQHandler
USART1_IRQHandler
USART2_IRQHandler
USART3_8_IRQHandler
CEC_CAN_IRQHandler
B .
ENDP
ALIGN
;*******************************************************************************
; User Stack and Heap initialization
;*******************************************************************************
IF :DEF:__MICROLIB
EXPORT __initial_sp
EXPORT __heap_base
EXPORT __heap_limit
ELSE
IMPORT __use_two_region_memory
EXPORT __user_initial_stackheap
__user_initial_stackheap
LDR R0, = Heap_Mem
LDR R1, =(Stack_Mem + Stack_Size)
LDR R2, = (Heap_Mem + Heap_Size)
LDR R3, = Stack_Mem
BX LR
ALIGN
ENDIF
END
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
|
aegean-odyssey/mpmd_marlin_1.1.x
| 10,745
|
STM32Cube-1.10.1/Projects/STM32F091RC-Nucleo/Examples/TIM/TIM_PWMOutput/SW4STM32/startup_stm32f091xc.s
|
/**
******************************************************************************
* @file startup_stm32f091xc.s
* @author MCD Application Team
* @brief STM32F091xC devices vector table for GCC toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M0 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
.syntax unified
.cpu cortex-m0
.fpu softvfp
.thumb
.global g_pfnVectors
.global Default_Handler
/* start address for the initialization values of the .data section.
defined in linker script */
.word _sidata
/* start address for the .data section. defined in linker script */
.word _sdata
/* end address for the .data section. defined in linker script */
.word _edata
/* start address for the .bss section. defined in linker script */
.word _sbss
/* end address for the .bss section. defined in linker script */
.word _ebss
.section .text.Reset_Handler
.weak Reset_Handler
.type Reset_Handler, %function
Reset_Handler:
ldr r0, =_estack
mov sp, r0 /* set stack pointer */
/* Copy the data segment initializers from flash to SRAM */
movs r1, #0
b LoopCopyDataInit
CopyDataInit:
ldr r3, =_sidata
ldr r3, [r3, r1]
str r3, [r0, r1]
adds r1, r1, #4
LoopCopyDataInit:
ldr r0, =_sdata
ldr r3, =_edata
adds r2, r0, r1
cmp r2, r3
bcc CopyDataInit
ldr r2, =_sbss
b LoopFillZerobss
/* Zero fill the bss segment. */
FillZerobss:
movs r3, #0
str r3, [r2]
adds r2, r2, #4
LoopFillZerobss:
ldr r3, = _ebss
cmp r2, r3
bcc FillZerobss
/* Call the clock system intitialization function.*/
bl SystemInit
/* Call static constructors */
bl __libc_init_array
/* Call the application's entry point.*/
bl main
LoopForever:
b LoopForever
.size Reset_Handler, .-Reset_Handler
/**
* @brief This is the code that gets called when the processor receives an
* unexpected interrupt. This simply enters an infinite loop, preserving
* the system state for examination by a debugger.
*
* @param None
* @retval : None
*/
.section .text.Default_Handler,"ax",%progbits
Default_Handler:
Infinite_Loop:
b Infinite_Loop
.size Default_Handler, .-Default_Handler
/******************************************************************************
*
* The minimal vector table for a Cortex M0. Note that the proper constructs
* must be placed on this to ensure that it ends up at physical address
* 0x0000.0000.
*
******************************************************************************/
.section .isr_vector,"a",%progbits
.type g_pfnVectors, %object
.size g_pfnVectors, .-g_pfnVectors
g_pfnVectors:
.word _estack
.word Reset_Handler
.word NMI_Handler
.word HardFault_Handler
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word SVC_Handler
.word 0
.word 0
.word PendSV_Handler
.word SysTick_Handler
.word WWDG_IRQHandler /* Window WatchDog */
.word PVD_VDDIO2_IRQHandler /* PVD and VDDIO2 through EXTI Line detect */
.word RTC_IRQHandler /* RTC through the EXTI line */
.word FLASH_IRQHandler /* FLASH */
.word RCC_CRS_IRQHandler /* RCC and CRS */
.word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */
.word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */
.word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */
.word TSC_IRQHandler /* TSC */
.word DMA1_Ch1_IRQHandler /* DMA1 Channel 1 */
.word DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler /* DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2 */
.word DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler /* DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5 */
.word ADC1_COMP_IRQHandler /* ADC1, COMP1 and COMP2 */
.word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */
.word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
.word TIM2_IRQHandler /* TIM2 */
.word TIM3_IRQHandler /* TIM3 */
.word TIM6_DAC_IRQHandler /* TIM6 and DAC */
.word TIM7_IRQHandler /* TIM7 */
.word TIM14_IRQHandler /* TIM14 */
.word TIM15_IRQHandler /* TIM15 */
.word TIM16_IRQHandler /* TIM16 */
.word TIM17_IRQHandler /* TIM17 */
.word I2C1_IRQHandler /* I2C1 */
.word I2C2_IRQHandler /* I2C2 */
.word SPI1_IRQHandler /* SPI1 */
.word SPI2_IRQHandler /* SPI2 */
.word USART1_IRQHandler /* USART1 */
.word USART2_IRQHandler /* USART2 */
.word USART3_8_IRQHandler /* USART3, USART4, USART5, USART6, USART7, USART8 */
.word CEC_CAN_IRQHandler /* CEC and CAN */
/*******************************************************************************
*
* Provide weak aliases for each Exception handler to the Default_Handler.
* As they are weak aliases, any function with the same name will override
* this definition.
*
*******************************************************************************/
.weak NMI_Handler
.thumb_set NMI_Handler,Default_Handler
.weak HardFault_Handler
.thumb_set HardFault_Handler,Default_Handler
.weak SVC_Handler
.thumb_set SVC_Handler,Default_Handler
.weak PendSV_Handler
.thumb_set PendSV_Handler,Default_Handler
.weak SysTick_Handler
.thumb_set SysTick_Handler,Default_Handler
.weak WWDG_IRQHandler
.thumb_set WWDG_IRQHandler,Default_Handler
.weak PVD_VDDIO2_IRQHandler
.thumb_set PVD_VDDIO2_IRQHandler,Default_Handler
.weak RTC_IRQHandler
.thumb_set RTC_IRQHandler,Default_Handler
.weak FLASH_IRQHandler
.thumb_set FLASH_IRQHandler,Default_Handler
.weak RCC_CRS_IRQHandler
.thumb_set RCC_CRS_IRQHandler,Default_Handler
.weak EXTI0_1_IRQHandler
.thumb_set EXTI0_1_IRQHandler,Default_Handler
.weak EXTI2_3_IRQHandler
.thumb_set EXTI2_3_IRQHandler,Default_Handler
.weak EXTI4_15_IRQHandler
.thumb_set EXTI4_15_IRQHandler,Default_Handler
.weak TSC_IRQHandler
.thumb_set TSC_IRQHandler,Default_Handler
.weak DMA1_Ch1_IRQHandler
.thumb_set DMA1_Ch1_IRQHandler,Default_Handler
.weak DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
.thumb_set DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler,Default_Handler
.weak DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
.thumb_set DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler,Default_Handler
.weak ADC1_COMP_IRQHandler
.thumb_set ADC1_COMP_IRQHandler,Default_Handler
.weak TIM1_BRK_UP_TRG_COM_IRQHandler
.thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
.weak TIM1_CC_IRQHandler
.thumb_set TIM1_CC_IRQHandler,Default_Handler
.weak TIM2_IRQHandler
.thumb_set TIM2_IRQHandler,Default_Handler
.weak TIM3_IRQHandler
.thumb_set TIM3_IRQHandler,Default_Handler
.weak TIM6_DAC_IRQHandler
.thumb_set TIM6_DAC_IRQHandler,Default_Handler
.weak TIM7_IRQHandler
.thumb_set TIM7_IRQHandler,Default_Handler
.weak TIM14_IRQHandler
.thumb_set TIM14_IRQHandler,Default_Handler
.weak TIM15_IRQHandler
.thumb_set TIM15_IRQHandler,Default_Handler
.weak TIM16_IRQHandler
.thumb_set TIM16_IRQHandler,Default_Handler
.weak TIM17_IRQHandler
.thumb_set TIM17_IRQHandler,Default_Handler
.weak I2C1_IRQHandler
.thumb_set I2C1_IRQHandler,Default_Handler
.weak I2C2_IRQHandler
.thumb_set I2C2_IRQHandler,Default_Handler
.weak SPI1_IRQHandler
.thumb_set SPI1_IRQHandler,Default_Handler
.weak SPI2_IRQHandler
.thumb_set SPI2_IRQHandler,Default_Handler
.weak USART1_IRQHandler
.thumb_set USART1_IRQHandler,Default_Handler
.weak USART2_IRQHandler
.thumb_set USART2_IRQHandler,Default_Handler
.weak USART3_8_IRQHandler
.thumb_set USART3_8_IRQHandler,Default_Handler
.weak CEC_CAN_IRQHandler
.thumb_set CEC_CAN_IRQHandler,Default_Handler
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
aegean-odyssey/mpmd_marlin_1.1.x
| 11,410
|
STM32Cube-1.10.1/Projects/STM32F091RC-Nucleo/Examples/TIM/TIM_PWMOutput/EWARM/startup_stm32f091xc.s
|
;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
;* File Name : startup_stm32f091xc.s
;* Author : MCD Application Team
;* Description : STM32F091xc/STM32F098xc devices vector table for EWARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == __iar_program_start,
;* - Set the vector table entries with the exceptions ISR
;* address,
;* - Branches to main in the C library (which eventually
;* calls main()).
;* After Reset the Cortex-M0 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;*******************************************************************************
;*
;* Redistribution and use in source and binary forms, with or without modification,
;* are permitted provided that the following conditions are met:
;* 1. Redistributions of source code must retain the above copyright notice,
;* this list of conditions and the following disclaimer.
;* 2. Redistributions in binary form must reproduce the above copyright notice,
;* this list of conditions and the following disclaimer in the documentation
;* and/or other materials provided with the distribution.
;* 3. Neither the name of STMicroelectronics nor the names of its contributors
;* may be used to endorse or promote products derived from this software
;* without specific prior written permission.
;*
;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
;*
;*******************************************************************************
;
;
; The modules in this file are included in the libraries, and may be replaced
; by any user-defined modules that define the PUBLIC symbol _program_start or
; a user defined start symbol.
; To override the cstartup defined in the library, simply add your modified
; version to the workbench project.
;
; The vector table is normally located at address 0.
; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
; The name "__vector_table" has special meaning for C-SPY:
; it is where the SP start value is found, and the NVIC vector
; table register (VTOR) is initialized to this address if != 0.
;
; Cortex-M version
;
MODULE ?cstartup
;; Forward declaration of sections.
SECTION CSTACK:DATA:NOROOT(3)
SECTION .intvec:CODE:NOROOT(2)
EXTERN __iar_program_start
EXTERN SystemInit
PUBLIC __vector_table
DATA
__vector_table
DCD sfe(CSTACK)
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window Watchdog
DCD PVD_VDDIO2_IRQHandler ; PVD and VDDIO2 through EXTI Line detect
DCD RTC_IRQHandler ; RTC through EXTI Line
DCD FLASH_IRQHandler ; FLASH
DCD RCC_CRS_IRQHandler ; RCC and CRS
DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
DCD TSC_IRQHandler ; TS
DCD DMA1_Ch1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler ; DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2
DCD DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler ; DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5
DCD ADC1_COMP_IRQHandler ; ADC1, COMP1 and COMP2
DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC
DCD TIM7_IRQHandler ; TIM7
DCD TIM14_IRQHandler ; TIM14
DCD TIM15_IRQHandler ; TIM15
DCD TIM16_IRQHandler ; TIM16
DCD TIM17_IRQHandler ; TIM17
DCD I2C1_IRQHandler ; I2C1
DCD I2C2_IRQHandler ; I2C2
DCD SPI1_IRQHandler ; SPI1
DCD SPI2_IRQHandler ; SPI2
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD USART3_8_IRQHandler ; USART3, USART4, USART5, USART6, USART7, USART8
DCD CEC_CAN_IRQHandler ; CEC and CAN
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Default interrupt handlers.
;;
THUMB
PUBWEAK Reset_Handler
SECTION .text:CODE:NOROOT:REORDER(2)
Reset_Handler
LDR R0, =SystemInit
BLX R0
LDR R0, =__iar_program_start
BX R0
PUBWEAK NMI_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
NMI_Handler
B NMI_Handler
PUBWEAK HardFault_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
HardFault_Handler
B HardFault_Handler
PUBWEAK SVC_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
SVC_Handler
B SVC_Handler
PUBWEAK PendSV_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
PendSV_Handler
B PendSV_Handler
PUBWEAK SysTick_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
SysTick_Handler
B SysTick_Handler
PUBWEAK WWDG_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
WWDG_IRQHandler
B WWDG_IRQHandler
PUBWEAK PVD_VDDIO2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
PVD_VDDIO2_IRQHandler
B PVD_VDDIO2_IRQHandler
PUBWEAK RTC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
RTC_IRQHandler
B RTC_IRQHandler
PUBWEAK FLASH_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
FLASH_IRQHandler
B FLASH_IRQHandler
PUBWEAK RCC_CRS_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
RCC_CRS_IRQHandler
B RCC_CRS_IRQHandler
PUBWEAK EXTI0_1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI0_1_IRQHandler
B EXTI0_1_IRQHandler
PUBWEAK EXTI2_3_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI2_3_IRQHandler
B EXTI2_3_IRQHandler
PUBWEAK EXTI4_15_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI4_15_IRQHandler
B EXTI4_15_IRQHandler
PUBWEAK TSC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TSC_IRQHandler
B TSC_IRQHandler
PUBWEAK DMA1_Ch1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Ch1_IRQHandler
B DMA1_Ch1_IRQHandler
PUBWEAK DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
B DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
PUBWEAK DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
B DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
PUBWEAK ADC1_COMP_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
ADC1_COMP_IRQHandler
B ADC1_COMP_IRQHandler
PUBWEAK TIM1_BRK_UP_TRG_COM_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM1_BRK_UP_TRG_COM_IRQHandler
B TIM1_BRK_UP_TRG_COM_IRQHandler
PUBWEAK TIM1_CC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM1_CC_IRQHandler
B TIM1_CC_IRQHandler
PUBWEAK TIM2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM2_IRQHandler
B TIM2_IRQHandler
PUBWEAK TIM3_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM3_IRQHandler
B TIM3_IRQHandler
PUBWEAK TIM6_DAC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM6_DAC_IRQHandler
B TIM6_DAC_IRQHandler
PUBWEAK TIM7_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM7_IRQHandler
B TIM7_IRQHandler
PUBWEAK TIM14_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM14_IRQHandler
B TIM14_IRQHandler
PUBWEAK TIM15_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM15_IRQHandler
B TIM15_IRQHandler
PUBWEAK TIM16_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM16_IRQHandler
B TIM16_IRQHandler
PUBWEAK TIM17_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM17_IRQHandler
B TIM17_IRQHandler
PUBWEAK I2C1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
I2C1_IRQHandler
B I2C1_IRQHandler
PUBWEAK I2C2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
I2C2_IRQHandler
B I2C2_IRQHandler
PUBWEAK SPI1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
SPI1_IRQHandler
B SPI1_IRQHandler
PUBWEAK SPI2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
SPI2_IRQHandler
B SPI2_IRQHandler
PUBWEAK USART1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
USART1_IRQHandler
B USART1_IRQHandler
PUBWEAK USART2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
USART2_IRQHandler
B USART2_IRQHandler
PUBWEAK USART3_8_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
USART3_8_IRQHandler
B USART3_8_IRQHandler
PUBWEAK CEC_CAN_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
CEC_CAN_IRQHandler
B CEC_CAN_IRQHandler
END
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
|
aegean-odyssey/mpmd_marlin_1.1.x
| 11,305
|
STM32Cube-1.10.1/Projects/STM32F091RC-Nucleo/Examples/TIM/TIM_PWMInput/MDK-ARM/startup_stm32f091xc.s
|
;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
;* File Name : startup_stm32f091xc.s
;* Author : MCD Application Team
;* Description : STM32F091xc/STM32F098xc devices vector table for MDK-ARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == Reset_Handler
;* - Set the vector table entries with the exceptions ISR address
;* - Branches to __main in the C library (which eventually
;* calls main()).
;* After Reset the CortexM0 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;*******************************************************************************
;
;* Redistribution and use in source and binary forms, with or without modification,
;* are permitted provided that the following conditions are met:
;* 1. Redistributions of source code must retain the above copyright notice,
;* this list of conditions and the following disclaimer.
;* 2. Redistributions in binary form must reproduce the above copyright notice,
;* this list of conditions and the following disclaimer in the documentation
;* and/or other materials provided with the distribution.
;* 3. Neither the name of STMicroelectronics nor the names of its contributors
;* may be used to endorse or promote products derived from this software
;* without specific prior written permission.
;*
;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
;
;*******************************************************************************
; Amount of memory (in bytes) allocated for Stack
; Tailor this value to your application needs
; <h> Stack Configuration
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Stack_Size EQU 0x400;
AREA STACK, NOINIT, READWRITE, ALIGN=3
Stack_Mem SPACE Stack_Size
__initial_sp
; <h> Heap Configuration
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Heap_Size EQU 0x200;
AREA HEAP, NOINIT, READWRITE, ALIGN=3
__heap_base
Heap_Mem SPACE Heap_Size
__heap_limit
PRESERVE8
THUMB
; Vector Table Mapped to Address 0 at Reset
AREA RESET, DATA, READONLY
EXPORT __Vectors
EXPORT __Vectors_End
EXPORT __Vectors_Size
__Vectors DCD __initial_sp ; Top of Stack
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window Watchdog
DCD PVD_VDDIO2_IRQHandler ; PVD through EXTI Line detect
DCD RTC_IRQHandler ; RTC through EXTI Line
DCD FLASH_IRQHandler ; FLASH
DCD RCC_CRS_IRQHandler ; RCC and CRS
DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
DCD TSC_IRQHandler ; TS
DCD DMA1_Ch1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler ; DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2
DCD DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler ; DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5
DCD ADC1_COMP_IRQHandler ; ADC1, COMP1 and COMP2
DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC
DCD TIM7_IRQHandler ; TIM7
DCD TIM14_IRQHandler ; TIM14
DCD TIM15_IRQHandler ; TIM15
DCD TIM16_IRQHandler ; TIM16
DCD TIM17_IRQHandler ; TIM17
DCD I2C1_IRQHandler ; I2C1
DCD I2C2_IRQHandler ; I2C2
DCD SPI1_IRQHandler ; SPI1
DCD SPI2_IRQHandler ; SPI2
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD USART3_8_IRQHandler ; USART3, USART4, USART5, USART6, USART7, USART8
DCD CEC_CAN_IRQHandler ; CEC and CAN
__Vectors_End
__Vectors_Size EQU __Vectors_End - __Vectors
AREA |.text|, CODE, READONLY
; Reset handler routine
Reset_Handler PROC
EXPORT Reset_Handler [WEAK]
IMPORT __main
IMPORT SystemInit
LDR R0, =SystemInit
BLX R0
LDR R0, =__main
BX R0
ENDP
; Dummy Exception Handlers (infinite loops which can be modified)
NMI_Handler PROC
EXPORT NMI_Handler [WEAK]
B .
ENDP
HardFault_Handler\
PROC
EXPORT HardFault_Handler [WEAK]
B .
ENDP
SVC_Handler PROC
EXPORT SVC_Handler [WEAK]
B .
ENDP
PendSV_Handler PROC
EXPORT PendSV_Handler [WEAK]
B .
ENDP
SysTick_Handler PROC
EXPORT SysTick_Handler [WEAK]
B .
ENDP
Default_Handler PROC
EXPORT WWDG_IRQHandler [WEAK]
EXPORT PVD_VDDIO2_IRQHandler [WEAK]
EXPORT RTC_IRQHandler [WEAK]
EXPORT FLASH_IRQHandler [WEAK]
EXPORT RCC_CRS_IRQHandler [WEAK]
EXPORT EXTI0_1_IRQHandler [WEAK]
EXPORT EXTI2_3_IRQHandler [WEAK]
EXPORT EXTI4_15_IRQHandler [WEAK]
EXPORT TSC_IRQHandler [WEAK]
EXPORT DMA1_Ch1_IRQHandler [WEAK]
EXPORT DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler [WEAK]
EXPORT DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler [WEAK]
EXPORT ADC1_COMP_IRQHandler [WEAK]
EXPORT TIM1_BRK_UP_TRG_COM_IRQHandler [WEAK]
EXPORT TIM1_CC_IRQHandler [WEAK]
EXPORT TIM2_IRQHandler [WEAK]
EXPORT TIM3_IRQHandler [WEAK]
EXPORT TIM6_DAC_IRQHandler [WEAK]
EXPORT TIM7_IRQHandler [WEAK]
EXPORT TIM14_IRQHandler [WEAK]
EXPORT TIM15_IRQHandler [WEAK]
EXPORT TIM16_IRQHandler [WEAK]
EXPORT TIM17_IRQHandler [WEAK]
EXPORT I2C1_IRQHandler [WEAK]
EXPORT I2C2_IRQHandler [WEAK]
EXPORT SPI1_IRQHandler [WEAK]
EXPORT SPI2_IRQHandler [WEAK]
EXPORT USART1_IRQHandler [WEAK]
EXPORT USART2_IRQHandler [WEAK]
EXPORT USART3_8_IRQHandler [WEAK]
EXPORT CEC_CAN_IRQHandler [WEAK]
WWDG_IRQHandler
PVD_VDDIO2_IRQHandler
RTC_IRQHandler
FLASH_IRQHandler
RCC_CRS_IRQHandler
EXTI0_1_IRQHandler
EXTI2_3_IRQHandler
EXTI4_15_IRQHandler
TSC_IRQHandler
DMA1_Ch1_IRQHandler
DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
ADC1_COMP_IRQHandler
TIM1_BRK_UP_TRG_COM_IRQHandler
TIM1_CC_IRQHandler
TIM2_IRQHandler
TIM3_IRQHandler
TIM6_DAC_IRQHandler
TIM7_IRQHandler
TIM14_IRQHandler
TIM15_IRQHandler
TIM16_IRQHandler
TIM17_IRQHandler
I2C1_IRQHandler
I2C2_IRQHandler
SPI1_IRQHandler
SPI2_IRQHandler
USART1_IRQHandler
USART2_IRQHandler
USART3_8_IRQHandler
CEC_CAN_IRQHandler
B .
ENDP
ALIGN
;*******************************************************************************
; User Stack and Heap initialization
;*******************************************************************************
IF :DEF:__MICROLIB
EXPORT __initial_sp
EXPORT __heap_base
EXPORT __heap_limit
ELSE
IMPORT __use_two_region_memory
EXPORT __user_initial_stackheap
__user_initial_stackheap
LDR R0, = Heap_Mem
LDR R1, =(Stack_Mem + Stack_Size)
LDR R2, = (Heap_Mem + Heap_Size)
LDR R3, = Stack_Mem
BX LR
ALIGN
ENDIF
END
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
|
aegean-odyssey/mpmd_marlin_1.1.x
| 10,745
|
STM32Cube-1.10.1/Projects/STM32F091RC-Nucleo/Examples/TIM/TIM_PWMInput/SW4STM32/startup_stm32f091xc.s
|
/**
******************************************************************************
* @file startup_stm32f091xc.s
* @author MCD Application Team
* @brief STM32F091xC devices vector table for GCC toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M0 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
.syntax unified
.cpu cortex-m0
.fpu softvfp
.thumb
.global g_pfnVectors
.global Default_Handler
/* start address for the initialization values of the .data section.
defined in linker script */
.word _sidata
/* start address for the .data section. defined in linker script */
.word _sdata
/* end address for the .data section. defined in linker script */
.word _edata
/* start address for the .bss section. defined in linker script */
.word _sbss
/* end address for the .bss section. defined in linker script */
.word _ebss
.section .text.Reset_Handler
.weak Reset_Handler
.type Reset_Handler, %function
Reset_Handler:
ldr r0, =_estack
mov sp, r0 /* set stack pointer */
/* Copy the data segment initializers from flash to SRAM */
movs r1, #0
b LoopCopyDataInit
CopyDataInit:
ldr r3, =_sidata
ldr r3, [r3, r1]
str r3, [r0, r1]
adds r1, r1, #4
LoopCopyDataInit:
ldr r0, =_sdata
ldr r3, =_edata
adds r2, r0, r1
cmp r2, r3
bcc CopyDataInit
ldr r2, =_sbss
b LoopFillZerobss
/* Zero fill the bss segment. */
FillZerobss:
movs r3, #0
str r3, [r2]
adds r2, r2, #4
LoopFillZerobss:
ldr r3, = _ebss
cmp r2, r3
bcc FillZerobss
/* Call the clock system intitialization function.*/
bl SystemInit
/* Call static constructors */
bl __libc_init_array
/* Call the application's entry point.*/
bl main
LoopForever:
b LoopForever
.size Reset_Handler, .-Reset_Handler
/**
* @brief This is the code that gets called when the processor receives an
* unexpected interrupt. This simply enters an infinite loop, preserving
* the system state for examination by a debugger.
*
* @param None
* @retval : None
*/
.section .text.Default_Handler,"ax",%progbits
Default_Handler:
Infinite_Loop:
b Infinite_Loop
.size Default_Handler, .-Default_Handler
/******************************************************************************
*
* The minimal vector table for a Cortex M0. Note that the proper constructs
* must be placed on this to ensure that it ends up at physical address
* 0x0000.0000.
*
******************************************************************************/
.section .isr_vector,"a",%progbits
.type g_pfnVectors, %object
.size g_pfnVectors, .-g_pfnVectors
g_pfnVectors:
.word _estack
.word Reset_Handler
.word NMI_Handler
.word HardFault_Handler
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word SVC_Handler
.word 0
.word 0
.word PendSV_Handler
.word SysTick_Handler
.word WWDG_IRQHandler /* Window WatchDog */
.word PVD_VDDIO2_IRQHandler /* PVD and VDDIO2 through EXTI Line detect */
.word RTC_IRQHandler /* RTC through the EXTI line */
.word FLASH_IRQHandler /* FLASH */
.word RCC_CRS_IRQHandler /* RCC and CRS */
.word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */
.word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */
.word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */
.word TSC_IRQHandler /* TSC */
.word DMA1_Ch1_IRQHandler /* DMA1 Channel 1 */
.word DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler /* DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2 */
.word DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler /* DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5 */
.word ADC1_COMP_IRQHandler /* ADC1, COMP1 and COMP2 */
.word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */
.word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
.word TIM2_IRQHandler /* TIM2 */
.word TIM3_IRQHandler /* TIM3 */
.word TIM6_DAC_IRQHandler /* TIM6 and DAC */
.word TIM7_IRQHandler /* TIM7 */
.word TIM14_IRQHandler /* TIM14 */
.word TIM15_IRQHandler /* TIM15 */
.word TIM16_IRQHandler /* TIM16 */
.word TIM17_IRQHandler /* TIM17 */
.word I2C1_IRQHandler /* I2C1 */
.word I2C2_IRQHandler /* I2C2 */
.word SPI1_IRQHandler /* SPI1 */
.word SPI2_IRQHandler /* SPI2 */
.word USART1_IRQHandler /* USART1 */
.word USART2_IRQHandler /* USART2 */
.word USART3_8_IRQHandler /* USART3, USART4, USART5, USART6, USART7, USART8 */
.word CEC_CAN_IRQHandler /* CEC and CAN */
/*******************************************************************************
*
* Provide weak aliases for each Exception handler to the Default_Handler.
* As they are weak aliases, any function with the same name will override
* this definition.
*
*******************************************************************************/
.weak NMI_Handler
.thumb_set NMI_Handler,Default_Handler
.weak HardFault_Handler
.thumb_set HardFault_Handler,Default_Handler
.weak SVC_Handler
.thumb_set SVC_Handler,Default_Handler
.weak PendSV_Handler
.thumb_set PendSV_Handler,Default_Handler
.weak SysTick_Handler
.thumb_set SysTick_Handler,Default_Handler
.weak WWDG_IRQHandler
.thumb_set WWDG_IRQHandler,Default_Handler
.weak PVD_VDDIO2_IRQHandler
.thumb_set PVD_VDDIO2_IRQHandler,Default_Handler
.weak RTC_IRQHandler
.thumb_set RTC_IRQHandler,Default_Handler
.weak FLASH_IRQHandler
.thumb_set FLASH_IRQHandler,Default_Handler
.weak RCC_CRS_IRQHandler
.thumb_set RCC_CRS_IRQHandler,Default_Handler
.weak EXTI0_1_IRQHandler
.thumb_set EXTI0_1_IRQHandler,Default_Handler
.weak EXTI2_3_IRQHandler
.thumb_set EXTI2_3_IRQHandler,Default_Handler
.weak EXTI4_15_IRQHandler
.thumb_set EXTI4_15_IRQHandler,Default_Handler
.weak TSC_IRQHandler
.thumb_set TSC_IRQHandler,Default_Handler
.weak DMA1_Ch1_IRQHandler
.thumb_set DMA1_Ch1_IRQHandler,Default_Handler
.weak DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
.thumb_set DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler,Default_Handler
.weak DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
.thumb_set DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler,Default_Handler
.weak ADC1_COMP_IRQHandler
.thumb_set ADC1_COMP_IRQHandler,Default_Handler
.weak TIM1_BRK_UP_TRG_COM_IRQHandler
.thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
.weak TIM1_CC_IRQHandler
.thumb_set TIM1_CC_IRQHandler,Default_Handler
.weak TIM2_IRQHandler
.thumb_set TIM2_IRQHandler,Default_Handler
.weak TIM3_IRQHandler
.thumb_set TIM3_IRQHandler,Default_Handler
.weak TIM6_DAC_IRQHandler
.thumb_set TIM6_DAC_IRQHandler,Default_Handler
.weak TIM7_IRQHandler
.thumb_set TIM7_IRQHandler,Default_Handler
.weak TIM14_IRQHandler
.thumb_set TIM14_IRQHandler,Default_Handler
.weak TIM15_IRQHandler
.thumb_set TIM15_IRQHandler,Default_Handler
.weak TIM16_IRQHandler
.thumb_set TIM16_IRQHandler,Default_Handler
.weak TIM17_IRQHandler
.thumb_set TIM17_IRQHandler,Default_Handler
.weak I2C1_IRQHandler
.thumb_set I2C1_IRQHandler,Default_Handler
.weak I2C2_IRQHandler
.thumb_set I2C2_IRQHandler,Default_Handler
.weak SPI1_IRQHandler
.thumb_set SPI1_IRQHandler,Default_Handler
.weak SPI2_IRQHandler
.thumb_set SPI2_IRQHandler,Default_Handler
.weak USART1_IRQHandler
.thumb_set USART1_IRQHandler,Default_Handler
.weak USART2_IRQHandler
.thumb_set USART2_IRQHandler,Default_Handler
.weak USART3_8_IRQHandler
.thumb_set USART3_8_IRQHandler,Default_Handler
.weak CEC_CAN_IRQHandler
.thumb_set CEC_CAN_IRQHandler,Default_Handler
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
aegean-odyssey/mpmd_marlin_1.1.x
| 11,410
|
STM32Cube-1.10.1/Projects/STM32F091RC-Nucleo/Examples/TIM/TIM_PWMInput/EWARM/startup_stm32f091xc.s
|
;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
;* File Name : startup_stm32f091xc.s
;* Author : MCD Application Team
;* Description : STM32F091xc/STM32F098xc devices vector table for EWARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == __iar_program_start,
;* - Set the vector table entries with the exceptions ISR
;* address,
;* - Branches to main in the C library (which eventually
;* calls main()).
;* After Reset the Cortex-M0 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;*******************************************************************************
;*
;* Redistribution and use in source and binary forms, with or without modification,
;* are permitted provided that the following conditions are met:
;* 1. Redistributions of source code must retain the above copyright notice,
;* this list of conditions and the following disclaimer.
;* 2. Redistributions in binary form must reproduce the above copyright notice,
;* this list of conditions and the following disclaimer in the documentation
;* and/or other materials provided with the distribution.
;* 3. Neither the name of STMicroelectronics nor the names of its contributors
;* may be used to endorse or promote products derived from this software
;* without specific prior written permission.
;*
;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
;*
;*******************************************************************************
;
;
; The modules in this file are included in the libraries, and may be replaced
; by any user-defined modules that define the PUBLIC symbol _program_start or
; a user defined start symbol.
; To override the cstartup defined in the library, simply add your modified
; version to the workbench project.
;
; The vector table is normally located at address 0.
; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
; The name "__vector_table" has special meaning for C-SPY:
; it is where the SP start value is found, and the NVIC vector
; table register (VTOR) is initialized to this address if != 0.
;
; Cortex-M version
;
MODULE ?cstartup
;; Forward declaration of sections.
SECTION CSTACK:DATA:NOROOT(3)
SECTION .intvec:CODE:NOROOT(2)
EXTERN __iar_program_start
EXTERN SystemInit
PUBLIC __vector_table
DATA
__vector_table
DCD sfe(CSTACK)
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window Watchdog
DCD PVD_VDDIO2_IRQHandler ; PVD and VDDIO2 through EXTI Line detect
DCD RTC_IRQHandler ; RTC through EXTI Line
DCD FLASH_IRQHandler ; FLASH
DCD RCC_CRS_IRQHandler ; RCC and CRS
DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
DCD TSC_IRQHandler ; TS
DCD DMA1_Ch1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler ; DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2
DCD DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler ; DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5
DCD ADC1_COMP_IRQHandler ; ADC1, COMP1 and COMP2
DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC
DCD TIM7_IRQHandler ; TIM7
DCD TIM14_IRQHandler ; TIM14
DCD TIM15_IRQHandler ; TIM15
DCD TIM16_IRQHandler ; TIM16
DCD TIM17_IRQHandler ; TIM17
DCD I2C1_IRQHandler ; I2C1
DCD I2C2_IRQHandler ; I2C2
DCD SPI1_IRQHandler ; SPI1
DCD SPI2_IRQHandler ; SPI2
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD USART3_8_IRQHandler ; USART3, USART4, USART5, USART6, USART7, USART8
DCD CEC_CAN_IRQHandler ; CEC and CAN
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Default interrupt handlers.
;;
THUMB
PUBWEAK Reset_Handler
SECTION .text:CODE:NOROOT:REORDER(2)
Reset_Handler
LDR R0, =SystemInit
BLX R0
LDR R0, =__iar_program_start
BX R0
PUBWEAK NMI_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
NMI_Handler
B NMI_Handler
PUBWEAK HardFault_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
HardFault_Handler
B HardFault_Handler
PUBWEAK SVC_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
SVC_Handler
B SVC_Handler
PUBWEAK PendSV_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
PendSV_Handler
B PendSV_Handler
PUBWEAK SysTick_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
SysTick_Handler
B SysTick_Handler
PUBWEAK WWDG_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
WWDG_IRQHandler
B WWDG_IRQHandler
PUBWEAK PVD_VDDIO2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
PVD_VDDIO2_IRQHandler
B PVD_VDDIO2_IRQHandler
PUBWEAK RTC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
RTC_IRQHandler
B RTC_IRQHandler
PUBWEAK FLASH_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
FLASH_IRQHandler
B FLASH_IRQHandler
PUBWEAK RCC_CRS_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
RCC_CRS_IRQHandler
B RCC_CRS_IRQHandler
PUBWEAK EXTI0_1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI0_1_IRQHandler
B EXTI0_1_IRQHandler
PUBWEAK EXTI2_3_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI2_3_IRQHandler
B EXTI2_3_IRQHandler
PUBWEAK EXTI4_15_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI4_15_IRQHandler
B EXTI4_15_IRQHandler
PUBWEAK TSC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TSC_IRQHandler
B TSC_IRQHandler
PUBWEAK DMA1_Ch1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Ch1_IRQHandler
B DMA1_Ch1_IRQHandler
PUBWEAK DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
B DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
PUBWEAK DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
B DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
PUBWEAK ADC1_COMP_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
ADC1_COMP_IRQHandler
B ADC1_COMP_IRQHandler
PUBWEAK TIM1_BRK_UP_TRG_COM_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM1_BRK_UP_TRG_COM_IRQHandler
B TIM1_BRK_UP_TRG_COM_IRQHandler
PUBWEAK TIM1_CC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM1_CC_IRQHandler
B TIM1_CC_IRQHandler
PUBWEAK TIM2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM2_IRQHandler
B TIM2_IRQHandler
PUBWEAK TIM3_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM3_IRQHandler
B TIM3_IRQHandler
PUBWEAK TIM6_DAC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM6_DAC_IRQHandler
B TIM6_DAC_IRQHandler
PUBWEAK TIM7_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM7_IRQHandler
B TIM7_IRQHandler
PUBWEAK TIM14_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM14_IRQHandler
B TIM14_IRQHandler
PUBWEAK TIM15_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM15_IRQHandler
B TIM15_IRQHandler
PUBWEAK TIM16_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM16_IRQHandler
B TIM16_IRQHandler
PUBWEAK TIM17_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM17_IRQHandler
B TIM17_IRQHandler
PUBWEAK I2C1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
I2C1_IRQHandler
B I2C1_IRQHandler
PUBWEAK I2C2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
I2C2_IRQHandler
B I2C2_IRQHandler
PUBWEAK SPI1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
SPI1_IRQHandler
B SPI1_IRQHandler
PUBWEAK SPI2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
SPI2_IRQHandler
B SPI2_IRQHandler
PUBWEAK USART1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
USART1_IRQHandler
B USART1_IRQHandler
PUBWEAK USART2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
USART2_IRQHandler
B USART2_IRQHandler
PUBWEAK USART3_8_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
USART3_8_IRQHandler
B USART3_8_IRQHandler
PUBWEAK CEC_CAN_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
CEC_CAN_IRQHandler
B CEC_CAN_IRQHandler
END
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
|
aegean-odyssey/mpmd_marlin_1.1.x
| 11,305
|
STM32Cube-1.10.1/Projects/STM32F091RC-Nucleo/Examples/TIM/TIM_DMA/MDK-ARM/startup_stm32f091xc.s
|
;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
;* File Name : startup_stm32f091xc.s
;* Author : MCD Application Team
;* Description : STM32F091xc/STM32F098xc devices vector table for MDK-ARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == Reset_Handler
;* - Set the vector table entries with the exceptions ISR address
;* - Branches to __main in the C library (which eventually
;* calls main()).
;* After Reset the CortexM0 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;*******************************************************************************
;
;* Redistribution and use in source and binary forms, with or without modification,
;* are permitted provided that the following conditions are met:
;* 1. Redistributions of source code must retain the above copyright notice,
;* this list of conditions and the following disclaimer.
;* 2. Redistributions in binary form must reproduce the above copyright notice,
;* this list of conditions and the following disclaimer in the documentation
;* and/or other materials provided with the distribution.
;* 3. Neither the name of STMicroelectronics nor the names of its contributors
;* may be used to endorse or promote products derived from this software
;* without specific prior written permission.
;*
;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
;
;*******************************************************************************
; Amount of memory (in bytes) allocated for Stack
; Tailor this value to your application needs
; <h> Stack Configuration
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Stack_Size EQU 0x400;
AREA STACK, NOINIT, READWRITE, ALIGN=3
Stack_Mem SPACE Stack_Size
__initial_sp
; <h> Heap Configuration
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Heap_Size EQU 0x200;
AREA HEAP, NOINIT, READWRITE, ALIGN=3
__heap_base
Heap_Mem SPACE Heap_Size
__heap_limit
PRESERVE8
THUMB
; Vector Table Mapped to Address 0 at Reset
AREA RESET, DATA, READONLY
EXPORT __Vectors
EXPORT __Vectors_End
EXPORT __Vectors_Size
__Vectors DCD __initial_sp ; Top of Stack
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window Watchdog
DCD PVD_VDDIO2_IRQHandler ; PVD through EXTI Line detect
DCD RTC_IRQHandler ; RTC through EXTI Line
DCD FLASH_IRQHandler ; FLASH
DCD RCC_CRS_IRQHandler ; RCC and CRS
DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
DCD TSC_IRQHandler ; TS
DCD DMA1_Ch1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler ; DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2
DCD DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler ; DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5
DCD ADC1_COMP_IRQHandler ; ADC1, COMP1 and COMP2
DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC
DCD TIM7_IRQHandler ; TIM7
DCD TIM14_IRQHandler ; TIM14
DCD TIM15_IRQHandler ; TIM15
DCD TIM16_IRQHandler ; TIM16
DCD TIM17_IRQHandler ; TIM17
DCD I2C1_IRQHandler ; I2C1
DCD I2C2_IRQHandler ; I2C2
DCD SPI1_IRQHandler ; SPI1
DCD SPI2_IRQHandler ; SPI2
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD USART3_8_IRQHandler ; USART3, USART4, USART5, USART6, USART7, USART8
DCD CEC_CAN_IRQHandler ; CEC and CAN
__Vectors_End
__Vectors_Size EQU __Vectors_End - __Vectors
AREA |.text|, CODE, READONLY
; Reset handler routine
Reset_Handler PROC
EXPORT Reset_Handler [WEAK]
IMPORT __main
IMPORT SystemInit
LDR R0, =SystemInit
BLX R0
LDR R0, =__main
BX R0
ENDP
; Dummy Exception Handlers (infinite loops which can be modified)
NMI_Handler PROC
EXPORT NMI_Handler [WEAK]
B .
ENDP
HardFault_Handler\
PROC
EXPORT HardFault_Handler [WEAK]
B .
ENDP
SVC_Handler PROC
EXPORT SVC_Handler [WEAK]
B .
ENDP
PendSV_Handler PROC
EXPORT PendSV_Handler [WEAK]
B .
ENDP
SysTick_Handler PROC
EXPORT SysTick_Handler [WEAK]
B .
ENDP
Default_Handler PROC
EXPORT WWDG_IRQHandler [WEAK]
EXPORT PVD_VDDIO2_IRQHandler [WEAK]
EXPORT RTC_IRQHandler [WEAK]
EXPORT FLASH_IRQHandler [WEAK]
EXPORT RCC_CRS_IRQHandler [WEAK]
EXPORT EXTI0_1_IRQHandler [WEAK]
EXPORT EXTI2_3_IRQHandler [WEAK]
EXPORT EXTI4_15_IRQHandler [WEAK]
EXPORT TSC_IRQHandler [WEAK]
EXPORT DMA1_Ch1_IRQHandler [WEAK]
EXPORT DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler [WEAK]
EXPORT DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler [WEAK]
EXPORT ADC1_COMP_IRQHandler [WEAK]
EXPORT TIM1_BRK_UP_TRG_COM_IRQHandler [WEAK]
EXPORT TIM1_CC_IRQHandler [WEAK]
EXPORT TIM2_IRQHandler [WEAK]
EXPORT TIM3_IRQHandler [WEAK]
EXPORT TIM6_DAC_IRQHandler [WEAK]
EXPORT TIM7_IRQHandler [WEAK]
EXPORT TIM14_IRQHandler [WEAK]
EXPORT TIM15_IRQHandler [WEAK]
EXPORT TIM16_IRQHandler [WEAK]
EXPORT TIM17_IRQHandler [WEAK]
EXPORT I2C1_IRQHandler [WEAK]
EXPORT I2C2_IRQHandler [WEAK]
EXPORT SPI1_IRQHandler [WEAK]
EXPORT SPI2_IRQHandler [WEAK]
EXPORT USART1_IRQHandler [WEAK]
EXPORT USART2_IRQHandler [WEAK]
EXPORT USART3_8_IRQHandler [WEAK]
EXPORT CEC_CAN_IRQHandler [WEAK]
WWDG_IRQHandler
PVD_VDDIO2_IRQHandler
RTC_IRQHandler
FLASH_IRQHandler
RCC_CRS_IRQHandler
EXTI0_1_IRQHandler
EXTI2_3_IRQHandler
EXTI4_15_IRQHandler
TSC_IRQHandler
DMA1_Ch1_IRQHandler
DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
ADC1_COMP_IRQHandler
TIM1_BRK_UP_TRG_COM_IRQHandler
TIM1_CC_IRQHandler
TIM2_IRQHandler
TIM3_IRQHandler
TIM6_DAC_IRQHandler
TIM7_IRQHandler
TIM14_IRQHandler
TIM15_IRQHandler
TIM16_IRQHandler
TIM17_IRQHandler
I2C1_IRQHandler
I2C2_IRQHandler
SPI1_IRQHandler
SPI2_IRQHandler
USART1_IRQHandler
USART2_IRQHandler
USART3_8_IRQHandler
CEC_CAN_IRQHandler
B .
ENDP
ALIGN
;*******************************************************************************
; User Stack and Heap initialization
;*******************************************************************************
IF :DEF:__MICROLIB
EXPORT __initial_sp
EXPORT __heap_base
EXPORT __heap_limit
ELSE
IMPORT __use_two_region_memory
EXPORT __user_initial_stackheap
__user_initial_stackheap
LDR R0, = Heap_Mem
LDR R1, =(Stack_Mem + Stack_Size)
LDR R2, = (Heap_Mem + Heap_Size)
LDR R3, = Stack_Mem
BX LR
ALIGN
ENDIF
END
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
|
aegean-odyssey/mpmd_marlin_1.1.x
| 10,745
|
STM32Cube-1.10.1/Projects/STM32F091RC-Nucleo/Examples/TIM/TIM_DMA/SW4STM32/startup_stm32f091xc.s
|
/**
******************************************************************************
* @file startup_stm32f091xc.s
* @author MCD Application Team
* @brief STM32F091xC devices vector table for GCC toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M0 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
.syntax unified
.cpu cortex-m0
.fpu softvfp
.thumb
.global g_pfnVectors
.global Default_Handler
/* start address for the initialization values of the .data section.
defined in linker script */
.word _sidata
/* start address for the .data section. defined in linker script */
.word _sdata
/* end address for the .data section. defined in linker script */
.word _edata
/* start address for the .bss section. defined in linker script */
.word _sbss
/* end address for the .bss section. defined in linker script */
.word _ebss
.section .text.Reset_Handler
.weak Reset_Handler
.type Reset_Handler, %function
Reset_Handler:
ldr r0, =_estack
mov sp, r0 /* set stack pointer */
/* Copy the data segment initializers from flash to SRAM */
movs r1, #0
b LoopCopyDataInit
CopyDataInit:
ldr r3, =_sidata
ldr r3, [r3, r1]
str r3, [r0, r1]
adds r1, r1, #4
LoopCopyDataInit:
ldr r0, =_sdata
ldr r3, =_edata
adds r2, r0, r1
cmp r2, r3
bcc CopyDataInit
ldr r2, =_sbss
b LoopFillZerobss
/* Zero fill the bss segment. */
FillZerobss:
movs r3, #0
str r3, [r2]
adds r2, r2, #4
LoopFillZerobss:
ldr r3, = _ebss
cmp r2, r3
bcc FillZerobss
/* Call the clock system intitialization function.*/
bl SystemInit
/* Call static constructors */
bl __libc_init_array
/* Call the application's entry point.*/
bl main
LoopForever:
b LoopForever
.size Reset_Handler, .-Reset_Handler
/**
* @brief This is the code that gets called when the processor receives an
* unexpected interrupt. This simply enters an infinite loop, preserving
* the system state for examination by a debugger.
*
* @param None
* @retval : None
*/
.section .text.Default_Handler,"ax",%progbits
Default_Handler:
Infinite_Loop:
b Infinite_Loop
.size Default_Handler, .-Default_Handler
/******************************************************************************
*
* The minimal vector table for a Cortex M0. Note that the proper constructs
* must be placed on this to ensure that it ends up at physical address
* 0x0000.0000.
*
******************************************************************************/
.section .isr_vector,"a",%progbits
.type g_pfnVectors, %object
.size g_pfnVectors, .-g_pfnVectors
g_pfnVectors:
.word _estack
.word Reset_Handler
.word NMI_Handler
.word HardFault_Handler
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word SVC_Handler
.word 0
.word 0
.word PendSV_Handler
.word SysTick_Handler
.word WWDG_IRQHandler /* Window WatchDog */
.word PVD_VDDIO2_IRQHandler /* PVD and VDDIO2 through EXTI Line detect */
.word RTC_IRQHandler /* RTC through the EXTI line */
.word FLASH_IRQHandler /* FLASH */
.word RCC_CRS_IRQHandler /* RCC and CRS */
.word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */
.word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */
.word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */
.word TSC_IRQHandler /* TSC */
.word DMA1_Ch1_IRQHandler /* DMA1 Channel 1 */
.word DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler /* DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2 */
.word DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler /* DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5 */
.word ADC1_COMP_IRQHandler /* ADC1, COMP1 and COMP2 */
.word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */
.word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
.word TIM2_IRQHandler /* TIM2 */
.word TIM3_IRQHandler /* TIM3 */
.word TIM6_DAC_IRQHandler /* TIM6 and DAC */
.word TIM7_IRQHandler /* TIM7 */
.word TIM14_IRQHandler /* TIM14 */
.word TIM15_IRQHandler /* TIM15 */
.word TIM16_IRQHandler /* TIM16 */
.word TIM17_IRQHandler /* TIM17 */
.word I2C1_IRQHandler /* I2C1 */
.word I2C2_IRQHandler /* I2C2 */
.word SPI1_IRQHandler /* SPI1 */
.word SPI2_IRQHandler /* SPI2 */
.word USART1_IRQHandler /* USART1 */
.word USART2_IRQHandler /* USART2 */
.word USART3_8_IRQHandler /* USART3, USART4, USART5, USART6, USART7, USART8 */
.word CEC_CAN_IRQHandler /* CEC and CAN */
/*******************************************************************************
*
* Provide weak aliases for each Exception handler to the Default_Handler.
* As they are weak aliases, any function with the same name will override
* this definition.
*
*******************************************************************************/
.weak NMI_Handler
.thumb_set NMI_Handler,Default_Handler
.weak HardFault_Handler
.thumb_set HardFault_Handler,Default_Handler
.weak SVC_Handler
.thumb_set SVC_Handler,Default_Handler
.weak PendSV_Handler
.thumb_set PendSV_Handler,Default_Handler
.weak SysTick_Handler
.thumb_set SysTick_Handler,Default_Handler
.weak WWDG_IRQHandler
.thumb_set WWDG_IRQHandler,Default_Handler
.weak PVD_VDDIO2_IRQHandler
.thumb_set PVD_VDDIO2_IRQHandler,Default_Handler
.weak RTC_IRQHandler
.thumb_set RTC_IRQHandler,Default_Handler
.weak FLASH_IRQHandler
.thumb_set FLASH_IRQHandler,Default_Handler
.weak RCC_CRS_IRQHandler
.thumb_set RCC_CRS_IRQHandler,Default_Handler
.weak EXTI0_1_IRQHandler
.thumb_set EXTI0_1_IRQHandler,Default_Handler
.weak EXTI2_3_IRQHandler
.thumb_set EXTI2_3_IRQHandler,Default_Handler
.weak EXTI4_15_IRQHandler
.thumb_set EXTI4_15_IRQHandler,Default_Handler
.weak TSC_IRQHandler
.thumb_set TSC_IRQHandler,Default_Handler
.weak DMA1_Ch1_IRQHandler
.thumb_set DMA1_Ch1_IRQHandler,Default_Handler
.weak DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
.thumb_set DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler,Default_Handler
.weak DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
.thumb_set DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler,Default_Handler
.weak ADC1_COMP_IRQHandler
.thumb_set ADC1_COMP_IRQHandler,Default_Handler
.weak TIM1_BRK_UP_TRG_COM_IRQHandler
.thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
.weak TIM1_CC_IRQHandler
.thumb_set TIM1_CC_IRQHandler,Default_Handler
.weak TIM2_IRQHandler
.thumb_set TIM2_IRQHandler,Default_Handler
.weak TIM3_IRQHandler
.thumb_set TIM3_IRQHandler,Default_Handler
.weak TIM6_DAC_IRQHandler
.thumb_set TIM6_DAC_IRQHandler,Default_Handler
.weak TIM7_IRQHandler
.thumb_set TIM7_IRQHandler,Default_Handler
.weak TIM14_IRQHandler
.thumb_set TIM14_IRQHandler,Default_Handler
.weak TIM15_IRQHandler
.thumb_set TIM15_IRQHandler,Default_Handler
.weak TIM16_IRQHandler
.thumb_set TIM16_IRQHandler,Default_Handler
.weak TIM17_IRQHandler
.thumb_set TIM17_IRQHandler,Default_Handler
.weak I2C1_IRQHandler
.thumb_set I2C1_IRQHandler,Default_Handler
.weak I2C2_IRQHandler
.thumb_set I2C2_IRQHandler,Default_Handler
.weak SPI1_IRQHandler
.thumb_set SPI1_IRQHandler,Default_Handler
.weak SPI2_IRQHandler
.thumb_set SPI2_IRQHandler,Default_Handler
.weak USART1_IRQHandler
.thumb_set USART1_IRQHandler,Default_Handler
.weak USART2_IRQHandler
.thumb_set USART2_IRQHandler,Default_Handler
.weak USART3_8_IRQHandler
.thumb_set USART3_8_IRQHandler,Default_Handler
.weak CEC_CAN_IRQHandler
.thumb_set CEC_CAN_IRQHandler,Default_Handler
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
aegean-odyssey/mpmd_marlin_1.1.x
| 11,410
|
STM32Cube-1.10.1/Projects/STM32F091RC-Nucleo/Examples/TIM/TIM_DMA/EWARM/startup_stm32f091xc.s
|
;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
;* File Name : startup_stm32f091xc.s
;* Author : MCD Application Team
;* Description : STM32F091xc/STM32F098xc devices vector table for EWARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == __iar_program_start,
;* - Set the vector table entries with the exceptions ISR
;* address,
;* - Branches to main in the C library (which eventually
;* calls main()).
;* After Reset the Cortex-M0 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;*******************************************************************************
;*
;* Redistribution and use in source and binary forms, with or without modification,
;* are permitted provided that the following conditions are met:
;* 1. Redistributions of source code must retain the above copyright notice,
;* this list of conditions and the following disclaimer.
;* 2. Redistributions in binary form must reproduce the above copyright notice,
;* this list of conditions and the following disclaimer in the documentation
;* and/or other materials provided with the distribution.
;* 3. Neither the name of STMicroelectronics nor the names of its contributors
;* may be used to endorse or promote products derived from this software
;* without specific prior written permission.
;*
;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
;*
;*******************************************************************************
;
;
; The modules in this file are included in the libraries, and may be replaced
; by any user-defined modules that define the PUBLIC symbol _program_start or
; a user defined start symbol.
; To override the cstartup defined in the library, simply add your modified
; version to the workbench project.
;
; The vector table is normally located at address 0.
; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
; The name "__vector_table" has special meaning for C-SPY:
; it is where the SP start value is found, and the NVIC vector
; table register (VTOR) is initialized to this address if != 0.
;
; Cortex-M version
;
MODULE ?cstartup
;; Forward declaration of sections.
SECTION CSTACK:DATA:NOROOT(3)
SECTION .intvec:CODE:NOROOT(2)
EXTERN __iar_program_start
EXTERN SystemInit
PUBLIC __vector_table
DATA
__vector_table
DCD sfe(CSTACK)
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window Watchdog
DCD PVD_VDDIO2_IRQHandler ; PVD and VDDIO2 through EXTI Line detect
DCD RTC_IRQHandler ; RTC through EXTI Line
DCD FLASH_IRQHandler ; FLASH
DCD RCC_CRS_IRQHandler ; RCC and CRS
DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
DCD TSC_IRQHandler ; TS
DCD DMA1_Ch1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler ; DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2
DCD DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler ; DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5
DCD ADC1_COMP_IRQHandler ; ADC1, COMP1 and COMP2
DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC
DCD TIM7_IRQHandler ; TIM7
DCD TIM14_IRQHandler ; TIM14
DCD TIM15_IRQHandler ; TIM15
DCD TIM16_IRQHandler ; TIM16
DCD TIM17_IRQHandler ; TIM17
DCD I2C1_IRQHandler ; I2C1
DCD I2C2_IRQHandler ; I2C2
DCD SPI1_IRQHandler ; SPI1
DCD SPI2_IRQHandler ; SPI2
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD USART3_8_IRQHandler ; USART3, USART4, USART5, USART6, USART7, USART8
DCD CEC_CAN_IRQHandler ; CEC and CAN
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Default interrupt handlers.
;;
THUMB
PUBWEAK Reset_Handler
SECTION .text:CODE:NOROOT:REORDER(2)
Reset_Handler
LDR R0, =SystemInit
BLX R0
LDR R0, =__iar_program_start
BX R0
PUBWEAK NMI_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
NMI_Handler
B NMI_Handler
PUBWEAK HardFault_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
HardFault_Handler
B HardFault_Handler
PUBWEAK SVC_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
SVC_Handler
B SVC_Handler
PUBWEAK PendSV_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
PendSV_Handler
B PendSV_Handler
PUBWEAK SysTick_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
SysTick_Handler
B SysTick_Handler
PUBWEAK WWDG_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
WWDG_IRQHandler
B WWDG_IRQHandler
PUBWEAK PVD_VDDIO2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
PVD_VDDIO2_IRQHandler
B PVD_VDDIO2_IRQHandler
PUBWEAK RTC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
RTC_IRQHandler
B RTC_IRQHandler
PUBWEAK FLASH_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
FLASH_IRQHandler
B FLASH_IRQHandler
PUBWEAK RCC_CRS_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
RCC_CRS_IRQHandler
B RCC_CRS_IRQHandler
PUBWEAK EXTI0_1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI0_1_IRQHandler
B EXTI0_1_IRQHandler
PUBWEAK EXTI2_3_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI2_3_IRQHandler
B EXTI2_3_IRQHandler
PUBWEAK EXTI4_15_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI4_15_IRQHandler
B EXTI4_15_IRQHandler
PUBWEAK TSC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TSC_IRQHandler
B TSC_IRQHandler
PUBWEAK DMA1_Ch1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Ch1_IRQHandler
B DMA1_Ch1_IRQHandler
PUBWEAK DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
B DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
PUBWEAK DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
B DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
PUBWEAK ADC1_COMP_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
ADC1_COMP_IRQHandler
B ADC1_COMP_IRQHandler
PUBWEAK TIM1_BRK_UP_TRG_COM_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM1_BRK_UP_TRG_COM_IRQHandler
B TIM1_BRK_UP_TRG_COM_IRQHandler
PUBWEAK TIM1_CC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM1_CC_IRQHandler
B TIM1_CC_IRQHandler
PUBWEAK TIM2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM2_IRQHandler
B TIM2_IRQHandler
PUBWEAK TIM3_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM3_IRQHandler
B TIM3_IRQHandler
PUBWEAK TIM6_DAC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM6_DAC_IRQHandler
B TIM6_DAC_IRQHandler
PUBWEAK TIM7_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM7_IRQHandler
B TIM7_IRQHandler
PUBWEAK TIM14_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM14_IRQHandler
B TIM14_IRQHandler
PUBWEAK TIM15_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM15_IRQHandler
B TIM15_IRQHandler
PUBWEAK TIM16_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM16_IRQHandler
B TIM16_IRQHandler
PUBWEAK TIM17_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM17_IRQHandler
B TIM17_IRQHandler
PUBWEAK I2C1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
I2C1_IRQHandler
B I2C1_IRQHandler
PUBWEAK I2C2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
I2C2_IRQHandler
B I2C2_IRQHandler
PUBWEAK SPI1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
SPI1_IRQHandler
B SPI1_IRQHandler
PUBWEAK SPI2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
SPI2_IRQHandler
B SPI2_IRQHandler
PUBWEAK USART1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
USART1_IRQHandler
B USART1_IRQHandler
PUBWEAK USART2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
USART2_IRQHandler
B USART2_IRQHandler
PUBWEAK USART3_8_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
USART3_8_IRQHandler
B USART3_8_IRQHandler
PUBWEAK CEC_CAN_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
CEC_CAN_IRQHandler
B CEC_CAN_IRQHandler
END
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
|
aegean-odyssey/mpmd_marlin_1.1.x
| 11,305
|
STM32Cube-1.10.1/Projects/STM32F091RC-Nucleo/Examples/TIM/TIM_ComplementarySignals/MDK-ARM/startup_stm32f091xc.s
|
;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
;* File Name : startup_stm32f091xc.s
;* Author : MCD Application Team
;* Description : STM32F091xc/STM32F098xc devices vector table for MDK-ARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == Reset_Handler
;* - Set the vector table entries with the exceptions ISR address
;* - Branches to __main in the C library (which eventually
;* calls main()).
;* After Reset the CortexM0 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;*******************************************************************************
;
;* Redistribution and use in source and binary forms, with or without modification,
;* are permitted provided that the following conditions are met:
;* 1. Redistributions of source code must retain the above copyright notice,
;* this list of conditions and the following disclaimer.
;* 2. Redistributions in binary form must reproduce the above copyright notice,
;* this list of conditions and the following disclaimer in the documentation
;* and/or other materials provided with the distribution.
;* 3. Neither the name of STMicroelectronics nor the names of its contributors
;* may be used to endorse or promote products derived from this software
;* without specific prior written permission.
;*
;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
;
;*******************************************************************************
; Amount of memory (in bytes) allocated for Stack
; Tailor this value to your application needs
; <h> Stack Configuration
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Stack_Size EQU 0x400;
AREA STACK, NOINIT, READWRITE, ALIGN=3
Stack_Mem SPACE Stack_Size
__initial_sp
; <h> Heap Configuration
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Heap_Size EQU 0x200;
AREA HEAP, NOINIT, READWRITE, ALIGN=3
__heap_base
Heap_Mem SPACE Heap_Size
__heap_limit
PRESERVE8
THUMB
; Vector Table Mapped to Address 0 at Reset
AREA RESET, DATA, READONLY
EXPORT __Vectors
EXPORT __Vectors_End
EXPORT __Vectors_Size
__Vectors DCD __initial_sp ; Top of Stack
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window Watchdog
DCD PVD_VDDIO2_IRQHandler ; PVD through EXTI Line detect
DCD RTC_IRQHandler ; RTC through EXTI Line
DCD FLASH_IRQHandler ; FLASH
DCD RCC_CRS_IRQHandler ; RCC and CRS
DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
DCD TSC_IRQHandler ; TS
DCD DMA1_Ch1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler ; DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2
DCD DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler ; DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5
DCD ADC1_COMP_IRQHandler ; ADC1, COMP1 and COMP2
DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC
DCD TIM7_IRQHandler ; TIM7
DCD TIM14_IRQHandler ; TIM14
DCD TIM15_IRQHandler ; TIM15
DCD TIM16_IRQHandler ; TIM16
DCD TIM17_IRQHandler ; TIM17
DCD I2C1_IRQHandler ; I2C1
DCD I2C2_IRQHandler ; I2C2
DCD SPI1_IRQHandler ; SPI1
DCD SPI2_IRQHandler ; SPI2
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD USART3_8_IRQHandler ; USART3, USART4, USART5, USART6, USART7, USART8
DCD CEC_CAN_IRQHandler ; CEC and CAN
__Vectors_End
__Vectors_Size EQU __Vectors_End - __Vectors
AREA |.text|, CODE, READONLY
; Reset handler routine
Reset_Handler PROC
EXPORT Reset_Handler [WEAK]
IMPORT __main
IMPORT SystemInit
LDR R0, =SystemInit
BLX R0
LDR R0, =__main
BX R0
ENDP
; Dummy Exception Handlers (infinite loops which can be modified)
NMI_Handler PROC
EXPORT NMI_Handler [WEAK]
B .
ENDP
HardFault_Handler\
PROC
EXPORT HardFault_Handler [WEAK]
B .
ENDP
SVC_Handler PROC
EXPORT SVC_Handler [WEAK]
B .
ENDP
PendSV_Handler PROC
EXPORT PendSV_Handler [WEAK]
B .
ENDP
SysTick_Handler PROC
EXPORT SysTick_Handler [WEAK]
B .
ENDP
Default_Handler PROC
EXPORT WWDG_IRQHandler [WEAK]
EXPORT PVD_VDDIO2_IRQHandler [WEAK]
EXPORT RTC_IRQHandler [WEAK]
EXPORT FLASH_IRQHandler [WEAK]
EXPORT RCC_CRS_IRQHandler [WEAK]
EXPORT EXTI0_1_IRQHandler [WEAK]
EXPORT EXTI2_3_IRQHandler [WEAK]
EXPORT EXTI4_15_IRQHandler [WEAK]
EXPORT TSC_IRQHandler [WEAK]
EXPORT DMA1_Ch1_IRQHandler [WEAK]
EXPORT DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler [WEAK]
EXPORT DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler [WEAK]
EXPORT ADC1_COMP_IRQHandler [WEAK]
EXPORT TIM1_BRK_UP_TRG_COM_IRQHandler [WEAK]
EXPORT TIM1_CC_IRQHandler [WEAK]
EXPORT TIM2_IRQHandler [WEAK]
EXPORT TIM3_IRQHandler [WEAK]
EXPORT TIM6_DAC_IRQHandler [WEAK]
EXPORT TIM7_IRQHandler [WEAK]
EXPORT TIM14_IRQHandler [WEAK]
EXPORT TIM15_IRQHandler [WEAK]
EXPORT TIM16_IRQHandler [WEAK]
EXPORT TIM17_IRQHandler [WEAK]
EXPORT I2C1_IRQHandler [WEAK]
EXPORT I2C2_IRQHandler [WEAK]
EXPORT SPI1_IRQHandler [WEAK]
EXPORT SPI2_IRQHandler [WEAK]
EXPORT USART1_IRQHandler [WEAK]
EXPORT USART2_IRQHandler [WEAK]
EXPORT USART3_8_IRQHandler [WEAK]
EXPORT CEC_CAN_IRQHandler [WEAK]
WWDG_IRQHandler
PVD_VDDIO2_IRQHandler
RTC_IRQHandler
FLASH_IRQHandler
RCC_CRS_IRQHandler
EXTI0_1_IRQHandler
EXTI2_3_IRQHandler
EXTI4_15_IRQHandler
TSC_IRQHandler
DMA1_Ch1_IRQHandler
DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
ADC1_COMP_IRQHandler
TIM1_BRK_UP_TRG_COM_IRQHandler
TIM1_CC_IRQHandler
TIM2_IRQHandler
TIM3_IRQHandler
TIM6_DAC_IRQHandler
TIM7_IRQHandler
TIM14_IRQHandler
TIM15_IRQHandler
TIM16_IRQHandler
TIM17_IRQHandler
I2C1_IRQHandler
I2C2_IRQHandler
SPI1_IRQHandler
SPI2_IRQHandler
USART1_IRQHandler
USART2_IRQHandler
USART3_8_IRQHandler
CEC_CAN_IRQHandler
B .
ENDP
ALIGN
;*******************************************************************************
; User Stack and Heap initialization
;*******************************************************************************
IF :DEF:__MICROLIB
EXPORT __initial_sp
EXPORT __heap_base
EXPORT __heap_limit
ELSE
IMPORT __use_two_region_memory
EXPORT __user_initial_stackheap
__user_initial_stackheap
LDR R0, = Heap_Mem
LDR R1, =(Stack_Mem + Stack_Size)
LDR R2, = (Heap_Mem + Heap_Size)
LDR R3, = Stack_Mem
BX LR
ALIGN
ENDIF
END
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
|
aegean-odyssey/mpmd_marlin_1.1.x
| 10,745
|
STM32Cube-1.10.1/Projects/STM32F091RC-Nucleo/Examples/TIM/TIM_ComplementarySignals/SW4STM32/startup_stm32f091xc.s
|
/**
******************************************************************************
* @file startup_stm32f091xc.s
* @author MCD Application Team
* @brief STM32F091xC devices vector table for GCC toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M0 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
.syntax unified
.cpu cortex-m0
.fpu softvfp
.thumb
.global g_pfnVectors
.global Default_Handler
/* start address for the initialization values of the .data section.
defined in linker script */
.word _sidata
/* start address for the .data section. defined in linker script */
.word _sdata
/* end address for the .data section. defined in linker script */
.word _edata
/* start address for the .bss section. defined in linker script */
.word _sbss
/* end address for the .bss section. defined in linker script */
.word _ebss
.section .text.Reset_Handler
.weak Reset_Handler
.type Reset_Handler, %function
Reset_Handler:
ldr r0, =_estack
mov sp, r0 /* set stack pointer */
/* Copy the data segment initializers from flash to SRAM */
movs r1, #0
b LoopCopyDataInit
CopyDataInit:
ldr r3, =_sidata
ldr r3, [r3, r1]
str r3, [r0, r1]
adds r1, r1, #4
LoopCopyDataInit:
ldr r0, =_sdata
ldr r3, =_edata
adds r2, r0, r1
cmp r2, r3
bcc CopyDataInit
ldr r2, =_sbss
b LoopFillZerobss
/* Zero fill the bss segment. */
FillZerobss:
movs r3, #0
str r3, [r2]
adds r2, r2, #4
LoopFillZerobss:
ldr r3, = _ebss
cmp r2, r3
bcc FillZerobss
/* Call the clock system intitialization function.*/
bl SystemInit
/* Call static constructors */
bl __libc_init_array
/* Call the application's entry point.*/
bl main
LoopForever:
b LoopForever
.size Reset_Handler, .-Reset_Handler
/**
* @brief This is the code that gets called when the processor receives an
* unexpected interrupt. This simply enters an infinite loop, preserving
* the system state for examination by a debugger.
*
* @param None
* @retval : None
*/
.section .text.Default_Handler,"ax",%progbits
Default_Handler:
Infinite_Loop:
b Infinite_Loop
.size Default_Handler, .-Default_Handler
/******************************************************************************
*
* The minimal vector table for a Cortex M0. Note that the proper constructs
* must be placed on this to ensure that it ends up at physical address
* 0x0000.0000.
*
******************************************************************************/
.section .isr_vector,"a",%progbits
.type g_pfnVectors, %object
.size g_pfnVectors, .-g_pfnVectors
g_pfnVectors:
.word _estack
.word Reset_Handler
.word NMI_Handler
.word HardFault_Handler
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word SVC_Handler
.word 0
.word 0
.word PendSV_Handler
.word SysTick_Handler
.word WWDG_IRQHandler /* Window WatchDog */
.word PVD_VDDIO2_IRQHandler /* PVD and VDDIO2 through EXTI Line detect */
.word RTC_IRQHandler /* RTC through the EXTI line */
.word FLASH_IRQHandler /* FLASH */
.word RCC_CRS_IRQHandler /* RCC and CRS */
.word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */
.word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */
.word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */
.word TSC_IRQHandler /* TSC */
.word DMA1_Ch1_IRQHandler /* DMA1 Channel 1 */
.word DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler /* DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2 */
.word DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler /* DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5 */
.word ADC1_COMP_IRQHandler /* ADC1, COMP1 and COMP2 */
.word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */
.word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
.word TIM2_IRQHandler /* TIM2 */
.word TIM3_IRQHandler /* TIM3 */
.word TIM6_DAC_IRQHandler /* TIM6 and DAC */
.word TIM7_IRQHandler /* TIM7 */
.word TIM14_IRQHandler /* TIM14 */
.word TIM15_IRQHandler /* TIM15 */
.word TIM16_IRQHandler /* TIM16 */
.word TIM17_IRQHandler /* TIM17 */
.word I2C1_IRQHandler /* I2C1 */
.word I2C2_IRQHandler /* I2C2 */
.word SPI1_IRQHandler /* SPI1 */
.word SPI2_IRQHandler /* SPI2 */
.word USART1_IRQHandler /* USART1 */
.word USART2_IRQHandler /* USART2 */
.word USART3_8_IRQHandler /* USART3, USART4, USART5, USART6, USART7, USART8 */
.word CEC_CAN_IRQHandler /* CEC and CAN */
/*******************************************************************************
*
* Provide weak aliases for each Exception handler to the Default_Handler.
* As they are weak aliases, any function with the same name will override
* this definition.
*
*******************************************************************************/
.weak NMI_Handler
.thumb_set NMI_Handler,Default_Handler
.weak HardFault_Handler
.thumb_set HardFault_Handler,Default_Handler
.weak SVC_Handler
.thumb_set SVC_Handler,Default_Handler
.weak PendSV_Handler
.thumb_set PendSV_Handler,Default_Handler
.weak SysTick_Handler
.thumb_set SysTick_Handler,Default_Handler
.weak WWDG_IRQHandler
.thumb_set WWDG_IRQHandler,Default_Handler
.weak PVD_VDDIO2_IRQHandler
.thumb_set PVD_VDDIO2_IRQHandler,Default_Handler
.weak RTC_IRQHandler
.thumb_set RTC_IRQHandler,Default_Handler
.weak FLASH_IRQHandler
.thumb_set FLASH_IRQHandler,Default_Handler
.weak RCC_CRS_IRQHandler
.thumb_set RCC_CRS_IRQHandler,Default_Handler
.weak EXTI0_1_IRQHandler
.thumb_set EXTI0_1_IRQHandler,Default_Handler
.weak EXTI2_3_IRQHandler
.thumb_set EXTI2_3_IRQHandler,Default_Handler
.weak EXTI4_15_IRQHandler
.thumb_set EXTI4_15_IRQHandler,Default_Handler
.weak TSC_IRQHandler
.thumb_set TSC_IRQHandler,Default_Handler
.weak DMA1_Ch1_IRQHandler
.thumb_set DMA1_Ch1_IRQHandler,Default_Handler
.weak DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
.thumb_set DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler,Default_Handler
.weak DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
.thumb_set DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler,Default_Handler
.weak ADC1_COMP_IRQHandler
.thumb_set ADC1_COMP_IRQHandler,Default_Handler
.weak TIM1_BRK_UP_TRG_COM_IRQHandler
.thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
.weak TIM1_CC_IRQHandler
.thumb_set TIM1_CC_IRQHandler,Default_Handler
.weak TIM2_IRQHandler
.thumb_set TIM2_IRQHandler,Default_Handler
.weak TIM3_IRQHandler
.thumb_set TIM3_IRQHandler,Default_Handler
.weak TIM6_DAC_IRQHandler
.thumb_set TIM6_DAC_IRQHandler,Default_Handler
.weak TIM7_IRQHandler
.thumb_set TIM7_IRQHandler,Default_Handler
.weak TIM14_IRQHandler
.thumb_set TIM14_IRQHandler,Default_Handler
.weak TIM15_IRQHandler
.thumb_set TIM15_IRQHandler,Default_Handler
.weak TIM16_IRQHandler
.thumb_set TIM16_IRQHandler,Default_Handler
.weak TIM17_IRQHandler
.thumb_set TIM17_IRQHandler,Default_Handler
.weak I2C1_IRQHandler
.thumb_set I2C1_IRQHandler,Default_Handler
.weak I2C2_IRQHandler
.thumb_set I2C2_IRQHandler,Default_Handler
.weak SPI1_IRQHandler
.thumb_set SPI1_IRQHandler,Default_Handler
.weak SPI2_IRQHandler
.thumb_set SPI2_IRQHandler,Default_Handler
.weak USART1_IRQHandler
.thumb_set USART1_IRQHandler,Default_Handler
.weak USART2_IRQHandler
.thumb_set USART2_IRQHandler,Default_Handler
.weak USART3_8_IRQHandler
.thumb_set USART3_8_IRQHandler,Default_Handler
.weak CEC_CAN_IRQHandler
.thumb_set CEC_CAN_IRQHandler,Default_Handler
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
aegean-odyssey/mpmd_marlin_1.1.x
| 11,410
|
STM32Cube-1.10.1/Projects/STM32F091RC-Nucleo/Examples/TIM/TIM_ComplementarySignals/EWARM/startup_stm32f091xc.s
|
;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
;* File Name : startup_stm32f091xc.s
;* Author : MCD Application Team
;* Description : STM32F091xc/STM32F098xc devices vector table for EWARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == __iar_program_start,
;* - Set the vector table entries with the exceptions ISR
;* address,
;* - Branches to main in the C library (which eventually
;* calls main()).
;* After Reset the Cortex-M0 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;*******************************************************************************
;*
;* Redistribution and use in source and binary forms, with or without modification,
;* are permitted provided that the following conditions are met:
;* 1. Redistributions of source code must retain the above copyright notice,
;* this list of conditions and the following disclaimer.
;* 2. Redistributions in binary form must reproduce the above copyright notice,
;* this list of conditions and the following disclaimer in the documentation
;* and/or other materials provided with the distribution.
;* 3. Neither the name of STMicroelectronics nor the names of its contributors
;* may be used to endorse or promote products derived from this software
;* without specific prior written permission.
;*
;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
;*
;*******************************************************************************
;
;
; The modules in this file are included in the libraries, and may be replaced
; by any user-defined modules that define the PUBLIC symbol _program_start or
; a user defined start symbol.
; To override the cstartup defined in the library, simply add your modified
; version to the workbench project.
;
; The vector table is normally located at address 0.
; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
; The name "__vector_table" has special meaning for C-SPY:
; it is where the SP start value is found, and the NVIC vector
; table register (VTOR) is initialized to this address if != 0.
;
; Cortex-M version
;
MODULE ?cstartup
;; Forward declaration of sections.
SECTION CSTACK:DATA:NOROOT(3)
SECTION .intvec:CODE:NOROOT(2)
EXTERN __iar_program_start
EXTERN SystemInit
PUBLIC __vector_table
DATA
__vector_table
DCD sfe(CSTACK)
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window Watchdog
DCD PVD_VDDIO2_IRQHandler ; PVD and VDDIO2 through EXTI Line detect
DCD RTC_IRQHandler ; RTC through EXTI Line
DCD FLASH_IRQHandler ; FLASH
DCD RCC_CRS_IRQHandler ; RCC and CRS
DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
DCD TSC_IRQHandler ; TS
DCD DMA1_Ch1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler ; DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2
DCD DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler ; DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5
DCD ADC1_COMP_IRQHandler ; ADC1, COMP1 and COMP2
DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC
DCD TIM7_IRQHandler ; TIM7
DCD TIM14_IRQHandler ; TIM14
DCD TIM15_IRQHandler ; TIM15
DCD TIM16_IRQHandler ; TIM16
DCD TIM17_IRQHandler ; TIM17
DCD I2C1_IRQHandler ; I2C1
DCD I2C2_IRQHandler ; I2C2
DCD SPI1_IRQHandler ; SPI1
DCD SPI2_IRQHandler ; SPI2
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD USART3_8_IRQHandler ; USART3, USART4, USART5, USART6, USART7, USART8
DCD CEC_CAN_IRQHandler ; CEC and CAN
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Default interrupt handlers.
;;
THUMB
PUBWEAK Reset_Handler
SECTION .text:CODE:NOROOT:REORDER(2)
Reset_Handler
LDR R0, =SystemInit
BLX R0
LDR R0, =__iar_program_start
BX R0
PUBWEAK NMI_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
NMI_Handler
B NMI_Handler
PUBWEAK HardFault_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
HardFault_Handler
B HardFault_Handler
PUBWEAK SVC_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
SVC_Handler
B SVC_Handler
PUBWEAK PendSV_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
PendSV_Handler
B PendSV_Handler
PUBWEAK SysTick_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
SysTick_Handler
B SysTick_Handler
PUBWEAK WWDG_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
WWDG_IRQHandler
B WWDG_IRQHandler
PUBWEAK PVD_VDDIO2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
PVD_VDDIO2_IRQHandler
B PVD_VDDIO2_IRQHandler
PUBWEAK RTC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
RTC_IRQHandler
B RTC_IRQHandler
PUBWEAK FLASH_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
FLASH_IRQHandler
B FLASH_IRQHandler
PUBWEAK RCC_CRS_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
RCC_CRS_IRQHandler
B RCC_CRS_IRQHandler
PUBWEAK EXTI0_1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI0_1_IRQHandler
B EXTI0_1_IRQHandler
PUBWEAK EXTI2_3_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI2_3_IRQHandler
B EXTI2_3_IRQHandler
PUBWEAK EXTI4_15_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI4_15_IRQHandler
B EXTI4_15_IRQHandler
PUBWEAK TSC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TSC_IRQHandler
B TSC_IRQHandler
PUBWEAK DMA1_Ch1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Ch1_IRQHandler
B DMA1_Ch1_IRQHandler
PUBWEAK DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
B DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
PUBWEAK DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
B DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
PUBWEAK ADC1_COMP_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
ADC1_COMP_IRQHandler
B ADC1_COMP_IRQHandler
PUBWEAK TIM1_BRK_UP_TRG_COM_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM1_BRK_UP_TRG_COM_IRQHandler
B TIM1_BRK_UP_TRG_COM_IRQHandler
PUBWEAK TIM1_CC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM1_CC_IRQHandler
B TIM1_CC_IRQHandler
PUBWEAK TIM2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM2_IRQHandler
B TIM2_IRQHandler
PUBWEAK TIM3_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM3_IRQHandler
B TIM3_IRQHandler
PUBWEAK TIM6_DAC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM6_DAC_IRQHandler
B TIM6_DAC_IRQHandler
PUBWEAK TIM7_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM7_IRQHandler
B TIM7_IRQHandler
PUBWEAK TIM14_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM14_IRQHandler
B TIM14_IRQHandler
PUBWEAK TIM15_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM15_IRQHandler
B TIM15_IRQHandler
PUBWEAK TIM16_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM16_IRQHandler
B TIM16_IRQHandler
PUBWEAK TIM17_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM17_IRQHandler
B TIM17_IRQHandler
PUBWEAK I2C1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
I2C1_IRQHandler
B I2C1_IRQHandler
PUBWEAK I2C2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
I2C2_IRQHandler
B I2C2_IRQHandler
PUBWEAK SPI1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
SPI1_IRQHandler
B SPI1_IRQHandler
PUBWEAK SPI2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
SPI2_IRQHandler
B SPI2_IRQHandler
PUBWEAK USART1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
USART1_IRQHandler
B USART1_IRQHandler
PUBWEAK USART2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
USART2_IRQHandler
B USART2_IRQHandler
PUBWEAK USART3_8_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
USART3_8_IRQHandler
B USART3_8_IRQHandler
PUBWEAK CEC_CAN_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
CEC_CAN_IRQHandler
B CEC_CAN_IRQHandler
END
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
|
aegean-odyssey/mpmd_marlin_1.1.x
| 11,305
|
STM32Cube-1.10.1/Projects/STM32F091RC-Nucleo/Examples/TIM/TIM_TimeBase/MDK-ARM/startup_stm32f091xc.s
|
;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
;* File Name : startup_stm32f091xc.s
;* Author : MCD Application Team
;* Description : STM32F091xc/STM32F098xc devices vector table for MDK-ARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == Reset_Handler
;* - Set the vector table entries with the exceptions ISR address
;* - Branches to __main in the C library (which eventually
;* calls main()).
;* After Reset the CortexM0 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;*******************************************************************************
;
;* Redistribution and use in source and binary forms, with or without modification,
;* are permitted provided that the following conditions are met:
;* 1. Redistributions of source code must retain the above copyright notice,
;* this list of conditions and the following disclaimer.
;* 2. Redistributions in binary form must reproduce the above copyright notice,
;* this list of conditions and the following disclaimer in the documentation
;* and/or other materials provided with the distribution.
;* 3. Neither the name of STMicroelectronics nor the names of its contributors
;* may be used to endorse or promote products derived from this software
;* without specific prior written permission.
;*
;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
;
;*******************************************************************************
; Amount of memory (in bytes) allocated for Stack
; Tailor this value to your application needs
; <h> Stack Configuration
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Stack_Size EQU 0x400;
AREA STACK, NOINIT, READWRITE, ALIGN=3
Stack_Mem SPACE Stack_Size
__initial_sp
; <h> Heap Configuration
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Heap_Size EQU 0x200;
AREA HEAP, NOINIT, READWRITE, ALIGN=3
__heap_base
Heap_Mem SPACE Heap_Size
__heap_limit
PRESERVE8
THUMB
; Vector Table Mapped to Address 0 at Reset
AREA RESET, DATA, READONLY
EXPORT __Vectors
EXPORT __Vectors_End
EXPORT __Vectors_Size
__Vectors DCD __initial_sp ; Top of Stack
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window Watchdog
DCD PVD_VDDIO2_IRQHandler ; PVD through EXTI Line detect
DCD RTC_IRQHandler ; RTC through EXTI Line
DCD FLASH_IRQHandler ; FLASH
DCD RCC_CRS_IRQHandler ; RCC and CRS
DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
DCD TSC_IRQHandler ; TS
DCD DMA1_Ch1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler ; DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2
DCD DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler ; DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5
DCD ADC1_COMP_IRQHandler ; ADC1, COMP1 and COMP2
DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC
DCD TIM7_IRQHandler ; TIM7
DCD TIM14_IRQHandler ; TIM14
DCD TIM15_IRQHandler ; TIM15
DCD TIM16_IRQHandler ; TIM16
DCD TIM17_IRQHandler ; TIM17
DCD I2C1_IRQHandler ; I2C1
DCD I2C2_IRQHandler ; I2C2
DCD SPI1_IRQHandler ; SPI1
DCD SPI2_IRQHandler ; SPI2
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD USART3_8_IRQHandler ; USART3, USART4, USART5, USART6, USART7, USART8
DCD CEC_CAN_IRQHandler ; CEC and CAN
__Vectors_End
__Vectors_Size EQU __Vectors_End - __Vectors
AREA |.text|, CODE, READONLY
; Reset handler routine
Reset_Handler PROC
EXPORT Reset_Handler [WEAK]
IMPORT __main
IMPORT SystemInit
LDR R0, =SystemInit
BLX R0
LDR R0, =__main
BX R0
ENDP
; Dummy Exception Handlers (infinite loops which can be modified)
NMI_Handler PROC
EXPORT NMI_Handler [WEAK]
B .
ENDP
HardFault_Handler\
PROC
EXPORT HardFault_Handler [WEAK]
B .
ENDP
SVC_Handler PROC
EXPORT SVC_Handler [WEAK]
B .
ENDP
PendSV_Handler PROC
EXPORT PendSV_Handler [WEAK]
B .
ENDP
SysTick_Handler PROC
EXPORT SysTick_Handler [WEAK]
B .
ENDP
Default_Handler PROC
EXPORT WWDG_IRQHandler [WEAK]
EXPORT PVD_VDDIO2_IRQHandler [WEAK]
EXPORT RTC_IRQHandler [WEAK]
EXPORT FLASH_IRQHandler [WEAK]
EXPORT RCC_CRS_IRQHandler [WEAK]
EXPORT EXTI0_1_IRQHandler [WEAK]
EXPORT EXTI2_3_IRQHandler [WEAK]
EXPORT EXTI4_15_IRQHandler [WEAK]
EXPORT TSC_IRQHandler [WEAK]
EXPORT DMA1_Ch1_IRQHandler [WEAK]
EXPORT DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler [WEAK]
EXPORT DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler [WEAK]
EXPORT ADC1_COMP_IRQHandler [WEAK]
EXPORT TIM1_BRK_UP_TRG_COM_IRQHandler [WEAK]
EXPORT TIM1_CC_IRQHandler [WEAK]
EXPORT TIM2_IRQHandler [WEAK]
EXPORT TIM3_IRQHandler [WEAK]
EXPORT TIM6_DAC_IRQHandler [WEAK]
EXPORT TIM7_IRQHandler [WEAK]
EXPORT TIM14_IRQHandler [WEAK]
EXPORT TIM15_IRQHandler [WEAK]
EXPORT TIM16_IRQHandler [WEAK]
EXPORT TIM17_IRQHandler [WEAK]
EXPORT I2C1_IRQHandler [WEAK]
EXPORT I2C2_IRQHandler [WEAK]
EXPORT SPI1_IRQHandler [WEAK]
EXPORT SPI2_IRQHandler [WEAK]
EXPORT USART1_IRQHandler [WEAK]
EXPORT USART2_IRQHandler [WEAK]
EXPORT USART3_8_IRQHandler [WEAK]
EXPORT CEC_CAN_IRQHandler [WEAK]
WWDG_IRQHandler
PVD_VDDIO2_IRQHandler
RTC_IRQHandler
FLASH_IRQHandler
RCC_CRS_IRQHandler
EXTI0_1_IRQHandler
EXTI2_3_IRQHandler
EXTI4_15_IRQHandler
TSC_IRQHandler
DMA1_Ch1_IRQHandler
DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
ADC1_COMP_IRQHandler
TIM1_BRK_UP_TRG_COM_IRQHandler
TIM1_CC_IRQHandler
TIM2_IRQHandler
TIM3_IRQHandler
TIM6_DAC_IRQHandler
TIM7_IRQHandler
TIM14_IRQHandler
TIM15_IRQHandler
TIM16_IRQHandler
TIM17_IRQHandler
I2C1_IRQHandler
I2C2_IRQHandler
SPI1_IRQHandler
SPI2_IRQHandler
USART1_IRQHandler
USART2_IRQHandler
USART3_8_IRQHandler
CEC_CAN_IRQHandler
B .
ENDP
ALIGN
;*******************************************************************************
; User Stack and Heap initialization
;*******************************************************************************
IF :DEF:__MICROLIB
EXPORT __initial_sp
EXPORT __heap_base
EXPORT __heap_limit
ELSE
IMPORT __use_two_region_memory
EXPORT __user_initial_stackheap
__user_initial_stackheap
LDR R0, = Heap_Mem
LDR R1, =(Stack_Mem + Stack_Size)
LDR R2, = (Heap_Mem + Heap_Size)
LDR R3, = Stack_Mem
BX LR
ALIGN
ENDIF
END
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
|
aegean-odyssey/mpmd_marlin_1.1.x
| 10,745
|
STM32Cube-1.10.1/Projects/STM32F091RC-Nucleo/Examples/TIM/TIM_TimeBase/SW4STM32/startup_stm32f091xc.s
|
/**
******************************************************************************
* @file startup_stm32f091xc.s
* @author MCD Application Team
* @brief STM32F091xC devices vector table for GCC toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M0 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
.syntax unified
.cpu cortex-m0
.fpu softvfp
.thumb
.global g_pfnVectors
.global Default_Handler
/* start address for the initialization values of the .data section.
defined in linker script */
.word _sidata
/* start address for the .data section. defined in linker script */
.word _sdata
/* end address for the .data section. defined in linker script */
.word _edata
/* start address for the .bss section. defined in linker script */
.word _sbss
/* end address for the .bss section. defined in linker script */
.word _ebss
.section .text.Reset_Handler
.weak Reset_Handler
.type Reset_Handler, %function
Reset_Handler:
ldr r0, =_estack
mov sp, r0 /* set stack pointer */
/* Copy the data segment initializers from flash to SRAM */
movs r1, #0
b LoopCopyDataInit
CopyDataInit:
ldr r3, =_sidata
ldr r3, [r3, r1]
str r3, [r0, r1]
adds r1, r1, #4
LoopCopyDataInit:
ldr r0, =_sdata
ldr r3, =_edata
adds r2, r0, r1
cmp r2, r3
bcc CopyDataInit
ldr r2, =_sbss
b LoopFillZerobss
/* Zero fill the bss segment. */
FillZerobss:
movs r3, #0
str r3, [r2]
adds r2, r2, #4
LoopFillZerobss:
ldr r3, = _ebss
cmp r2, r3
bcc FillZerobss
/* Call the clock system intitialization function.*/
bl SystemInit
/* Call static constructors */
bl __libc_init_array
/* Call the application's entry point.*/
bl main
LoopForever:
b LoopForever
.size Reset_Handler, .-Reset_Handler
/**
* @brief This is the code that gets called when the processor receives an
* unexpected interrupt. This simply enters an infinite loop, preserving
* the system state for examination by a debugger.
*
* @param None
* @retval : None
*/
.section .text.Default_Handler,"ax",%progbits
Default_Handler:
Infinite_Loop:
b Infinite_Loop
.size Default_Handler, .-Default_Handler
/******************************************************************************
*
* The minimal vector table for a Cortex M0. Note that the proper constructs
* must be placed on this to ensure that it ends up at physical address
* 0x0000.0000.
*
******************************************************************************/
.section .isr_vector,"a",%progbits
.type g_pfnVectors, %object
.size g_pfnVectors, .-g_pfnVectors
g_pfnVectors:
.word _estack
.word Reset_Handler
.word NMI_Handler
.word HardFault_Handler
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word SVC_Handler
.word 0
.word 0
.word PendSV_Handler
.word SysTick_Handler
.word WWDG_IRQHandler /* Window WatchDog */
.word PVD_VDDIO2_IRQHandler /* PVD and VDDIO2 through EXTI Line detect */
.word RTC_IRQHandler /* RTC through the EXTI line */
.word FLASH_IRQHandler /* FLASH */
.word RCC_CRS_IRQHandler /* RCC and CRS */
.word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */
.word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */
.word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */
.word TSC_IRQHandler /* TSC */
.word DMA1_Ch1_IRQHandler /* DMA1 Channel 1 */
.word DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler /* DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2 */
.word DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler /* DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5 */
.word ADC1_COMP_IRQHandler /* ADC1, COMP1 and COMP2 */
.word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */
.word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
.word TIM2_IRQHandler /* TIM2 */
.word TIM3_IRQHandler /* TIM3 */
.word TIM6_DAC_IRQHandler /* TIM6 and DAC */
.word TIM7_IRQHandler /* TIM7 */
.word TIM14_IRQHandler /* TIM14 */
.word TIM15_IRQHandler /* TIM15 */
.word TIM16_IRQHandler /* TIM16 */
.word TIM17_IRQHandler /* TIM17 */
.word I2C1_IRQHandler /* I2C1 */
.word I2C2_IRQHandler /* I2C2 */
.word SPI1_IRQHandler /* SPI1 */
.word SPI2_IRQHandler /* SPI2 */
.word USART1_IRQHandler /* USART1 */
.word USART2_IRQHandler /* USART2 */
.word USART3_8_IRQHandler /* USART3, USART4, USART5, USART6, USART7, USART8 */
.word CEC_CAN_IRQHandler /* CEC and CAN */
/*******************************************************************************
*
* Provide weak aliases for each Exception handler to the Default_Handler.
* As they are weak aliases, any function with the same name will override
* this definition.
*
*******************************************************************************/
.weak NMI_Handler
.thumb_set NMI_Handler,Default_Handler
.weak HardFault_Handler
.thumb_set HardFault_Handler,Default_Handler
.weak SVC_Handler
.thumb_set SVC_Handler,Default_Handler
.weak PendSV_Handler
.thumb_set PendSV_Handler,Default_Handler
.weak SysTick_Handler
.thumb_set SysTick_Handler,Default_Handler
.weak WWDG_IRQHandler
.thumb_set WWDG_IRQHandler,Default_Handler
.weak PVD_VDDIO2_IRQHandler
.thumb_set PVD_VDDIO2_IRQHandler,Default_Handler
.weak RTC_IRQHandler
.thumb_set RTC_IRQHandler,Default_Handler
.weak FLASH_IRQHandler
.thumb_set FLASH_IRQHandler,Default_Handler
.weak RCC_CRS_IRQHandler
.thumb_set RCC_CRS_IRQHandler,Default_Handler
.weak EXTI0_1_IRQHandler
.thumb_set EXTI0_1_IRQHandler,Default_Handler
.weak EXTI2_3_IRQHandler
.thumb_set EXTI2_3_IRQHandler,Default_Handler
.weak EXTI4_15_IRQHandler
.thumb_set EXTI4_15_IRQHandler,Default_Handler
.weak TSC_IRQHandler
.thumb_set TSC_IRQHandler,Default_Handler
.weak DMA1_Ch1_IRQHandler
.thumb_set DMA1_Ch1_IRQHandler,Default_Handler
.weak DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
.thumb_set DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler,Default_Handler
.weak DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
.thumb_set DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler,Default_Handler
.weak ADC1_COMP_IRQHandler
.thumb_set ADC1_COMP_IRQHandler,Default_Handler
.weak TIM1_BRK_UP_TRG_COM_IRQHandler
.thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
.weak TIM1_CC_IRQHandler
.thumb_set TIM1_CC_IRQHandler,Default_Handler
.weak TIM2_IRQHandler
.thumb_set TIM2_IRQHandler,Default_Handler
.weak TIM3_IRQHandler
.thumb_set TIM3_IRQHandler,Default_Handler
.weak TIM6_DAC_IRQHandler
.thumb_set TIM6_DAC_IRQHandler,Default_Handler
.weak TIM7_IRQHandler
.thumb_set TIM7_IRQHandler,Default_Handler
.weak TIM14_IRQHandler
.thumb_set TIM14_IRQHandler,Default_Handler
.weak TIM15_IRQHandler
.thumb_set TIM15_IRQHandler,Default_Handler
.weak TIM16_IRQHandler
.thumb_set TIM16_IRQHandler,Default_Handler
.weak TIM17_IRQHandler
.thumb_set TIM17_IRQHandler,Default_Handler
.weak I2C1_IRQHandler
.thumb_set I2C1_IRQHandler,Default_Handler
.weak I2C2_IRQHandler
.thumb_set I2C2_IRQHandler,Default_Handler
.weak SPI1_IRQHandler
.thumb_set SPI1_IRQHandler,Default_Handler
.weak SPI2_IRQHandler
.thumb_set SPI2_IRQHandler,Default_Handler
.weak USART1_IRQHandler
.thumb_set USART1_IRQHandler,Default_Handler
.weak USART2_IRQHandler
.thumb_set USART2_IRQHandler,Default_Handler
.weak USART3_8_IRQHandler
.thumb_set USART3_8_IRQHandler,Default_Handler
.weak CEC_CAN_IRQHandler
.thumb_set CEC_CAN_IRQHandler,Default_Handler
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
aegean-odyssey/mpmd_marlin_1.1.x
| 11,410
|
STM32Cube-1.10.1/Projects/STM32F091RC-Nucleo/Examples/TIM/TIM_TimeBase/EWARM/startup_stm32f091xc.s
|
;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
;* File Name : startup_stm32f091xc.s
;* Author : MCD Application Team
;* Description : STM32F091xc/STM32F098xc devices vector table for EWARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == __iar_program_start,
;* - Set the vector table entries with the exceptions ISR
;* address,
;* - Branches to main in the C library (which eventually
;* calls main()).
;* After Reset the Cortex-M0 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;*******************************************************************************
;*
;* Redistribution and use in source and binary forms, with or without modification,
;* are permitted provided that the following conditions are met:
;* 1. Redistributions of source code must retain the above copyright notice,
;* this list of conditions and the following disclaimer.
;* 2. Redistributions in binary form must reproduce the above copyright notice,
;* this list of conditions and the following disclaimer in the documentation
;* and/or other materials provided with the distribution.
;* 3. Neither the name of STMicroelectronics nor the names of its contributors
;* may be used to endorse or promote products derived from this software
;* without specific prior written permission.
;*
;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
;*
;*******************************************************************************
;
;
; The modules in this file are included in the libraries, and may be replaced
; by any user-defined modules that define the PUBLIC symbol _program_start or
; a user defined start symbol.
; To override the cstartup defined in the library, simply add your modified
; version to the workbench project.
;
; The vector table is normally located at address 0.
; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
; The name "__vector_table" has special meaning for C-SPY:
; it is where the SP start value is found, and the NVIC vector
; table register (VTOR) is initialized to this address if != 0.
;
; Cortex-M version
;
MODULE ?cstartup
;; Forward declaration of sections.
SECTION CSTACK:DATA:NOROOT(3)
SECTION .intvec:CODE:NOROOT(2)
EXTERN __iar_program_start
EXTERN SystemInit
PUBLIC __vector_table
DATA
__vector_table
DCD sfe(CSTACK)
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window Watchdog
DCD PVD_VDDIO2_IRQHandler ; PVD and VDDIO2 through EXTI Line detect
DCD RTC_IRQHandler ; RTC through EXTI Line
DCD FLASH_IRQHandler ; FLASH
DCD RCC_CRS_IRQHandler ; RCC and CRS
DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
DCD TSC_IRQHandler ; TS
DCD DMA1_Ch1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler ; DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2
DCD DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler ; DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5
DCD ADC1_COMP_IRQHandler ; ADC1, COMP1 and COMP2
DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC
DCD TIM7_IRQHandler ; TIM7
DCD TIM14_IRQHandler ; TIM14
DCD TIM15_IRQHandler ; TIM15
DCD TIM16_IRQHandler ; TIM16
DCD TIM17_IRQHandler ; TIM17
DCD I2C1_IRQHandler ; I2C1
DCD I2C2_IRQHandler ; I2C2
DCD SPI1_IRQHandler ; SPI1
DCD SPI2_IRQHandler ; SPI2
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD USART3_8_IRQHandler ; USART3, USART4, USART5, USART6, USART7, USART8
DCD CEC_CAN_IRQHandler ; CEC and CAN
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Default interrupt handlers.
;;
THUMB
PUBWEAK Reset_Handler
SECTION .text:CODE:NOROOT:REORDER(2)
Reset_Handler
LDR R0, =SystemInit
BLX R0
LDR R0, =__iar_program_start
BX R0
PUBWEAK NMI_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
NMI_Handler
B NMI_Handler
PUBWEAK HardFault_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
HardFault_Handler
B HardFault_Handler
PUBWEAK SVC_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
SVC_Handler
B SVC_Handler
PUBWEAK PendSV_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
PendSV_Handler
B PendSV_Handler
PUBWEAK SysTick_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
SysTick_Handler
B SysTick_Handler
PUBWEAK WWDG_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
WWDG_IRQHandler
B WWDG_IRQHandler
PUBWEAK PVD_VDDIO2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
PVD_VDDIO2_IRQHandler
B PVD_VDDIO2_IRQHandler
PUBWEAK RTC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
RTC_IRQHandler
B RTC_IRQHandler
PUBWEAK FLASH_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
FLASH_IRQHandler
B FLASH_IRQHandler
PUBWEAK RCC_CRS_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
RCC_CRS_IRQHandler
B RCC_CRS_IRQHandler
PUBWEAK EXTI0_1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI0_1_IRQHandler
B EXTI0_1_IRQHandler
PUBWEAK EXTI2_3_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI2_3_IRQHandler
B EXTI2_3_IRQHandler
PUBWEAK EXTI4_15_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI4_15_IRQHandler
B EXTI4_15_IRQHandler
PUBWEAK TSC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TSC_IRQHandler
B TSC_IRQHandler
PUBWEAK DMA1_Ch1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Ch1_IRQHandler
B DMA1_Ch1_IRQHandler
PUBWEAK DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
B DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
PUBWEAK DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
B DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
PUBWEAK ADC1_COMP_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
ADC1_COMP_IRQHandler
B ADC1_COMP_IRQHandler
PUBWEAK TIM1_BRK_UP_TRG_COM_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM1_BRK_UP_TRG_COM_IRQHandler
B TIM1_BRK_UP_TRG_COM_IRQHandler
PUBWEAK TIM1_CC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM1_CC_IRQHandler
B TIM1_CC_IRQHandler
PUBWEAK TIM2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM2_IRQHandler
B TIM2_IRQHandler
PUBWEAK TIM3_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM3_IRQHandler
B TIM3_IRQHandler
PUBWEAK TIM6_DAC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM6_DAC_IRQHandler
B TIM6_DAC_IRQHandler
PUBWEAK TIM7_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM7_IRQHandler
B TIM7_IRQHandler
PUBWEAK TIM14_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM14_IRQHandler
B TIM14_IRQHandler
PUBWEAK TIM15_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM15_IRQHandler
B TIM15_IRQHandler
PUBWEAK TIM16_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM16_IRQHandler
B TIM16_IRQHandler
PUBWEAK TIM17_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM17_IRQHandler
B TIM17_IRQHandler
PUBWEAK I2C1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
I2C1_IRQHandler
B I2C1_IRQHandler
PUBWEAK I2C2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
I2C2_IRQHandler
B I2C2_IRQHandler
PUBWEAK SPI1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
SPI1_IRQHandler
B SPI1_IRQHandler
PUBWEAK SPI2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
SPI2_IRQHandler
B SPI2_IRQHandler
PUBWEAK USART1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
USART1_IRQHandler
B USART1_IRQHandler
PUBWEAK USART2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
USART2_IRQHandler
B USART2_IRQHandler
PUBWEAK USART3_8_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
USART3_8_IRQHandler
B USART3_8_IRQHandler
PUBWEAK CEC_CAN_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
CEC_CAN_IRQHandler
B CEC_CAN_IRQHandler
END
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
|
aegean-odyssey/mpmd_marlin_1.1.x
| 11,305
|
STM32Cube-1.10.1/Projects/STM32F091RC-Nucleo/Examples/WWDG/WWDG_Example/MDK-ARM/startup_stm32f091xc.s
|
;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
;* File Name : startup_stm32f091xc.s
;* Author : MCD Application Team
;* Description : STM32F091xc/STM32F098xc devices vector table for MDK-ARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == Reset_Handler
;* - Set the vector table entries with the exceptions ISR address
;* - Branches to __main in the C library (which eventually
;* calls main()).
;* After Reset the CortexM0 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;*******************************************************************************
;
;* Redistribution and use in source and binary forms, with or without modification,
;* are permitted provided that the following conditions are met:
;* 1. Redistributions of source code must retain the above copyright notice,
;* this list of conditions and the following disclaimer.
;* 2. Redistributions in binary form must reproduce the above copyright notice,
;* this list of conditions and the following disclaimer in the documentation
;* and/or other materials provided with the distribution.
;* 3. Neither the name of STMicroelectronics nor the names of its contributors
;* may be used to endorse or promote products derived from this software
;* without specific prior written permission.
;*
;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
;
;*******************************************************************************
; Amount of memory (in bytes) allocated for Stack
; Tailor this value to your application needs
; <h> Stack Configuration
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Stack_Size EQU 0x400;
AREA STACK, NOINIT, READWRITE, ALIGN=3
Stack_Mem SPACE Stack_Size
__initial_sp
; <h> Heap Configuration
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Heap_Size EQU 0x200;
AREA HEAP, NOINIT, READWRITE, ALIGN=3
__heap_base
Heap_Mem SPACE Heap_Size
__heap_limit
PRESERVE8
THUMB
; Vector Table Mapped to Address 0 at Reset
AREA RESET, DATA, READONLY
EXPORT __Vectors
EXPORT __Vectors_End
EXPORT __Vectors_Size
__Vectors DCD __initial_sp ; Top of Stack
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window Watchdog
DCD PVD_VDDIO2_IRQHandler ; PVD through EXTI Line detect
DCD RTC_IRQHandler ; RTC through EXTI Line
DCD FLASH_IRQHandler ; FLASH
DCD RCC_CRS_IRQHandler ; RCC and CRS
DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
DCD TSC_IRQHandler ; TS
DCD DMA1_Ch1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler ; DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2
DCD DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler ; DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5
DCD ADC1_COMP_IRQHandler ; ADC1, COMP1 and COMP2
DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC
DCD TIM7_IRQHandler ; TIM7
DCD TIM14_IRQHandler ; TIM14
DCD TIM15_IRQHandler ; TIM15
DCD TIM16_IRQHandler ; TIM16
DCD TIM17_IRQHandler ; TIM17
DCD I2C1_IRQHandler ; I2C1
DCD I2C2_IRQHandler ; I2C2
DCD SPI1_IRQHandler ; SPI1
DCD SPI2_IRQHandler ; SPI2
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD USART3_8_IRQHandler ; USART3, USART4, USART5, USART6, USART7, USART8
DCD CEC_CAN_IRQHandler ; CEC and CAN
__Vectors_End
__Vectors_Size EQU __Vectors_End - __Vectors
AREA |.text|, CODE, READONLY
; Reset handler routine
Reset_Handler PROC
EXPORT Reset_Handler [WEAK]
IMPORT __main
IMPORT SystemInit
LDR R0, =SystemInit
BLX R0
LDR R0, =__main
BX R0
ENDP
; Dummy Exception Handlers (infinite loops which can be modified)
NMI_Handler PROC
EXPORT NMI_Handler [WEAK]
B .
ENDP
HardFault_Handler\
PROC
EXPORT HardFault_Handler [WEAK]
B .
ENDP
SVC_Handler PROC
EXPORT SVC_Handler [WEAK]
B .
ENDP
PendSV_Handler PROC
EXPORT PendSV_Handler [WEAK]
B .
ENDP
SysTick_Handler PROC
EXPORT SysTick_Handler [WEAK]
B .
ENDP
Default_Handler PROC
EXPORT WWDG_IRQHandler [WEAK]
EXPORT PVD_VDDIO2_IRQHandler [WEAK]
EXPORT RTC_IRQHandler [WEAK]
EXPORT FLASH_IRQHandler [WEAK]
EXPORT RCC_CRS_IRQHandler [WEAK]
EXPORT EXTI0_1_IRQHandler [WEAK]
EXPORT EXTI2_3_IRQHandler [WEAK]
EXPORT EXTI4_15_IRQHandler [WEAK]
EXPORT TSC_IRQHandler [WEAK]
EXPORT DMA1_Ch1_IRQHandler [WEAK]
EXPORT DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler [WEAK]
EXPORT DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler [WEAK]
EXPORT ADC1_COMP_IRQHandler [WEAK]
EXPORT TIM1_BRK_UP_TRG_COM_IRQHandler [WEAK]
EXPORT TIM1_CC_IRQHandler [WEAK]
EXPORT TIM2_IRQHandler [WEAK]
EXPORT TIM3_IRQHandler [WEAK]
EXPORT TIM6_DAC_IRQHandler [WEAK]
EXPORT TIM7_IRQHandler [WEAK]
EXPORT TIM14_IRQHandler [WEAK]
EXPORT TIM15_IRQHandler [WEAK]
EXPORT TIM16_IRQHandler [WEAK]
EXPORT TIM17_IRQHandler [WEAK]
EXPORT I2C1_IRQHandler [WEAK]
EXPORT I2C2_IRQHandler [WEAK]
EXPORT SPI1_IRQHandler [WEAK]
EXPORT SPI2_IRQHandler [WEAK]
EXPORT USART1_IRQHandler [WEAK]
EXPORT USART2_IRQHandler [WEAK]
EXPORT USART3_8_IRQHandler [WEAK]
EXPORT CEC_CAN_IRQHandler [WEAK]
WWDG_IRQHandler
PVD_VDDIO2_IRQHandler
RTC_IRQHandler
FLASH_IRQHandler
RCC_CRS_IRQHandler
EXTI0_1_IRQHandler
EXTI2_3_IRQHandler
EXTI4_15_IRQHandler
TSC_IRQHandler
DMA1_Ch1_IRQHandler
DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
ADC1_COMP_IRQHandler
TIM1_BRK_UP_TRG_COM_IRQHandler
TIM1_CC_IRQHandler
TIM2_IRQHandler
TIM3_IRQHandler
TIM6_DAC_IRQHandler
TIM7_IRQHandler
TIM14_IRQHandler
TIM15_IRQHandler
TIM16_IRQHandler
TIM17_IRQHandler
I2C1_IRQHandler
I2C2_IRQHandler
SPI1_IRQHandler
SPI2_IRQHandler
USART1_IRQHandler
USART2_IRQHandler
USART3_8_IRQHandler
CEC_CAN_IRQHandler
B .
ENDP
ALIGN
;*******************************************************************************
; User Stack and Heap initialization
;*******************************************************************************
IF :DEF:__MICROLIB
EXPORT __initial_sp
EXPORT __heap_base
EXPORT __heap_limit
ELSE
IMPORT __use_two_region_memory
EXPORT __user_initial_stackheap
__user_initial_stackheap
LDR R0, = Heap_Mem
LDR R1, =(Stack_Mem + Stack_Size)
LDR R2, = (Heap_Mem + Heap_Size)
LDR R3, = Stack_Mem
BX LR
ALIGN
ENDIF
END
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
|
aegean-odyssey/mpmd_marlin_1.1.x
| 10,745
|
STM32Cube-1.10.1/Projects/STM32F091RC-Nucleo/Examples/WWDG/WWDG_Example/SW4STM32/startup_stm32f091xc.s
|
/**
******************************************************************************
* @file startup_stm32f091xc.s
* @author MCD Application Team
* @brief STM32F091xC devices vector table for GCC toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M0 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
.syntax unified
.cpu cortex-m0
.fpu softvfp
.thumb
.global g_pfnVectors
.global Default_Handler
/* start address for the initialization values of the .data section.
defined in linker script */
.word _sidata
/* start address for the .data section. defined in linker script */
.word _sdata
/* end address for the .data section. defined in linker script */
.word _edata
/* start address for the .bss section. defined in linker script */
.word _sbss
/* end address for the .bss section. defined in linker script */
.word _ebss
.section .text.Reset_Handler
.weak Reset_Handler
.type Reset_Handler, %function
Reset_Handler:
ldr r0, =_estack
mov sp, r0 /* set stack pointer */
/* Copy the data segment initializers from flash to SRAM */
movs r1, #0
b LoopCopyDataInit
CopyDataInit:
ldr r3, =_sidata
ldr r3, [r3, r1]
str r3, [r0, r1]
adds r1, r1, #4
LoopCopyDataInit:
ldr r0, =_sdata
ldr r3, =_edata
adds r2, r0, r1
cmp r2, r3
bcc CopyDataInit
ldr r2, =_sbss
b LoopFillZerobss
/* Zero fill the bss segment. */
FillZerobss:
movs r3, #0
str r3, [r2]
adds r2, r2, #4
LoopFillZerobss:
ldr r3, = _ebss
cmp r2, r3
bcc FillZerobss
/* Call the clock system intitialization function.*/
bl SystemInit
/* Call static constructors */
bl __libc_init_array
/* Call the application's entry point.*/
bl main
LoopForever:
b LoopForever
.size Reset_Handler, .-Reset_Handler
/**
* @brief This is the code that gets called when the processor receives an
* unexpected interrupt. This simply enters an infinite loop, preserving
* the system state for examination by a debugger.
*
* @param None
* @retval : None
*/
.section .text.Default_Handler,"ax",%progbits
Default_Handler:
Infinite_Loop:
b Infinite_Loop
.size Default_Handler, .-Default_Handler
/******************************************************************************
*
* The minimal vector table for a Cortex M0. Note that the proper constructs
* must be placed on this to ensure that it ends up at physical address
* 0x0000.0000.
*
******************************************************************************/
.section .isr_vector,"a",%progbits
.type g_pfnVectors, %object
.size g_pfnVectors, .-g_pfnVectors
g_pfnVectors:
.word _estack
.word Reset_Handler
.word NMI_Handler
.word HardFault_Handler
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word SVC_Handler
.word 0
.word 0
.word PendSV_Handler
.word SysTick_Handler
.word WWDG_IRQHandler /* Window WatchDog */
.word PVD_VDDIO2_IRQHandler /* PVD and VDDIO2 through EXTI Line detect */
.word RTC_IRQHandler /* RTC through the EXTI line */
.word FLASH_IRQHandler /* FLASH */
.word RCC_CRS_IRQHandler /* RCC and CRS */
.word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */
.word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */
.word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */
.word TSC_IRQHandler /* TSC */
.word DMA1_Ch1_IRQHandler /* DMA1 Channel 1 */
.word DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler /* DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2 */
.word DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler /* DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5 */
.word ADC1_COMP_IRQHandler /* ADC1, COMP1 and COMP2 */
.word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */
.word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
.word TIM2_IRQHandler /* TIM2 */
.word TIM3_IRQHandler /* TIM3 */
.word TIM6_DAC_IRQHandler /* TIM6 and DAC */
.word TIM7_IRQHandler /* TIM7 */
.word TIM14_IRQHandler /* TIM14 */
.word TIM15_IRQHandler /* TIM15 */
.word TIM16_IRQHandler /* TIM16 */
.word TIM17_IRQHandler /* TIM17 */
.word I2C1_IRQHandler /* I2C1 */
.word I2C2_IRQHandler /* I2C2 */
.word SPI1_IRQHandler /* SPI1 */
.word SPI2_IRQHandler /* SPI2 */
.word USART1_IRQHandler /* USART1 */
.word USART2_IRQHandler /* USART2 */
.word USART3_8_IRQHandler /* USART3, USART4, USART5, USART6, USART7, USART8 */
.word CEC_CAN_IRQHandler /* CEC and CAN */
/*******************************************************************************
*
* Provide weak aliases for each Exception handler to the Default_Handler.
* As they are weak aliases, any function with the same name will override
* this definition.
*
*******************************************************************************/
.weak NMI_Handler
.thumb_set NMI_Handler,Default_Handler
.weak HardFault_Handler
.thumb_set HardFault_Handler,Default_Handler
.weak SVC_Handler
.thumb_set SVC_Handler,Default_Handler
.weak PendSV_Handler
.thumb_set PendSV_Handler,Default_Handler
.weak SysTick_Handler
.thumb_set SysTick_Handler,Default_Handler
.weak WWDG_IRQHandler
.thumb_set WWDG_IRQHandler,Default_Handler
.weak PVD_VDDIO2_IRQHandler
.thumb_set PVD_VDDIO2_IRQHandler,Default_Handler
.weak RTC_IRQHandler
.thumb_set RTC_IRQHandler,Default_Handler
.weak FLASH_IRQHandler
.thumb_set FLASH_IRQHandler,Default_Handler
.weak RCC_CRS_IRQHandler
.thumb_set RCC_CRS_IRQHandler,Default_Handler
.weak EXTI0_1_IRQHandler
.thumb_set EXTI0_1_IRQHandler,Default_Handler
.weak EXTI2_3_IRQHandler
.thumb_set EXTI2_3_IRQHandler,Default_Handler
.weak EXTI4_15_IRQHandler
.thumb_set EXTI4_15_IRQHandler,Default_Handler
.weak TSC_IRQHandler
.thumb_set TSC_IRQHandler,Default_Handler
.weak DMA1_Ch1_IRQHandler
.thumb_set DMA1_Ch1_IRQHandler,Default_Handler
.weak DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
.thumb_set DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler,Default_Handler
.weak DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
.thumb_set DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler,Default_Handler
.weak ADC1_COMP_IRQHandler
.thumb_set ADC1_COMP_IRQHandler,Default_Handler
.weak TIM1_BRK_UP_TRG_COM_IRQHandler
.thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
.weak TIM1_CC_IRQHandler
.thumb_set TIM1_CC_IRQHandler,Default_Handler
.weak TIM2_IRQHandler
.thumb_set TIM2_IRQHandler,Default_Handler
.weak TIM3_IRQHandler
.thumb_set TIM3_IRQHandler,Default_Handler
.weak TIM6_DAC_IRQHandler
.thumb_set TIM6_DAC_IRQHandler,Default_Handler
.weak TIM7_IRQHandler
.thumb_set TIM7_IRQHandler,Default_Handler
.weak TIM14_IRQHandler
.thumb_set TIM14_IRQHandler,Default_Handler
.weak TIM15_IRQHandler
.thumb_set TIM15_IRQHandler,Default_Handler
.weak TIM16_IRQHandler
.thumb_set TIM16_IRQHandler,Default_Handler
.weak TIM17_IRQHandler
.thumb_set TIM17_IRQHandler,Default_Handler
.weak I2C1_IRQHandler
.thumb_set I2C1_IRQHandler,Default_Handler
.weak I2C2_IRQHandler
.thumb_set I2C2_IRQHandler,Default_Handler
.weak SPI1_IRQHandler
.thumb_set SPI1_IRQHandler,Default_Handler
.weak SPI2_IRQHandler
.thumb_set SPI2_IRQHandler,Default_Handler
.weak USART1_IRQHandler
.thumb_set USART1_IRQHandler,Default_Handler
.weak USART2_IRQHandler
.thumb_set USART2_IRQHandler,Default_Handler
.weak USART3_8_IRQHandler
.thumb_set USART3_8_IRQHandler,Default_Handler
.weak CEC_CAN_IRQHandler
.thumb_set CEC_CAN_IRQHandler,Default_Handler
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
aegean-odyssey/mpmd_marlin_1.1.x
| 11,410
|
STM32Cube-1.10.1/Projects/STM32F091RC-Nucleo/Examples/WWDG/WWDG_Example/EWARM/startup_stm32f091xc.s
|
;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
;* File Name : startup_stm32f091xc.s
;* Author : MCD Application Team
;* Description : STM32F091xc/STM32F098xc devices vector table for EWARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == __iar_program_start,
;* - Set the vector table entries with the exceptions ISR
;* address,
;* - Branches to main in the C library (which eventually
;* calls main()).
;* After Reset the Cortex-M0 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;*******************************************************************************
;*
;* Redistribution and use in source and binary forms, with or without modification,
;* are permitted provided that the following conditions are met:
;* 1. Redistributions of source code must retain the above copyright notice,
;* this list of conditions and the following disclaimer.
;* 2. Redistributions in binary form must reproduce the above copyright notice,
;* this list of conditions and the following disclaimer in the documentation
;* and/or other materials provided with the distribution.
;* 3. Neither the name of STMicroelectronics nor the names of its contributors
;* may be used to endorse or promote products derived from this software
;* without specific prior written permission.
;*
;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
;*
;*******************************************************************************
;
;
; The modules in this file are included in the libraries, and may be replaced
; by any user-defined modules that define the PUBLIC symbol _program_start or
; a user defined start symbol.
; To override the cstartup defined in the library, simply add your modified
; version to the workbench project.
;
; The vector table is normally located at address 0.
; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
; The name "__vector_table" has special meaning for C-SPY:
; it is where the SP start value is found, and the NVIC vector
; table register (VTOR) is initialized to this address if != 0.
;
; Cortex-M version
;
MODULE ?cstartup
;; Forward declaration of sections.
SECTION CSTACK:DATA:NOROOT(3)
SECTION .intvec:CODE:NOROOT(2)
EXTERN __iar_program_start
EXTERN SystemInit
PUBLIC __vector_table
DATA
__vector_table
DCD sfe(CSTACK)
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window Watchdog
DCD PVD_VDDIO2_IRQHandler ; PVD and VDDIO2 through EXTI Line detect
DCD RTC_IRQHandler ; RTC through EXTI Line
DCD FLASH_IRQHandler ; FLASH
DCD RCC_CRS_IRQHandler ; RCC and CRS
DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
DCD TSC_IRQHandler ; TS
DCD DMA1_Ch1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler ; DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2
DCD DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler ; DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5
DCD ADC1_COMP_IRQHandler ; ADC1, COMP1 and COMP2
DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC
DCD TIM7_IRQHandler ; TIM7
DCD TIM14_IRQHandler ; TIM14
DCD TIM15_IRQHandler ; TIM15
DCD TIM16_IRQHandler ; TIM16
DCD TIM17_IRQHandler ; TIM17
DCD I2C1_IRQHandler ; I2C1
DCD I2C2_IRQHandler ; I2C2
DCD SPI1_IRQHandler ; SPI1
DCD SPI2_IRQHandler ; SPI2
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD USART3_8_IRQHandler ; USART3, USART4, USART5, USART6, USART7, USART8
DCD CEC_CAN_IRQHandler ; CEC and CAN
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Default interrupt handlers.
;;
THUMB
PUBWEAK Reset_Handler
SECTION .text:CODE:NOROOT:REORDER(2)
Reset_Handler
LDR R0, =SystemInit
BLX R0
LDR R0, =__iar_program_start
BX R0
PUBWEAK NMI_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
NMI_Handler
B NMI_Handler
PUBWEAK HardFault_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
HardFault_Handler
B HardFault_Handler
PUBWEAK SVC_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
SVC_Handler
B SVC_Handler
PUBWEAK PendSV_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
PendSV_Handler
B PendSV_Handler
PUBWEAK SysTick_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
SysTick_Handler
B SysTick_Handler
PUBWEAK WWDG_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
WWDG_IRQHandler
B WWDG_IRQHandler
PUBWEAK PVD_VDDIO2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
PVD_VDDIO2_IRQHandler
B PVD_VDDIO2_IRQHandler
PUBWEAK RTC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
RTC_IRQHandler
B RTC_IRQHandler
PUBWEAK FLASH_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
FLASH_IRQHandler
B FLASH_IRQHandler
PUBWEAK RCC_CRS_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
RCC_CRS_IRQHandler
B RCC_CRS_IRQHandler
PUBWEAK EXTI0_1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI0_1_IRQHandler
B EXTI0_1_IRQHandler
PUBWEAK EXTI2_3_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI2_3_IRQHandler
B EXTI2_3_IRQHandler
PUBWEAK EXTI4_15_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI4_15_IRQHandler
B EXTI4_15_IRQHandler
PUBWEAK TSC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TSC_IRQHandler
B TSC_IRQHandler
PUBWEAK DMA1_Ch1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Ch1_IRQHandler
B DMA1_Ch1_IRQHandler
PUBWEAK DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
B DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
PUBWEAK DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
B DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
PUBWEAK ADC1_COMP_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
ADC1_COMP_IRQHandler
B ADC1_COMP_IRQHandler
PUBWEAK TIM1_BRK_UP_TRG_COM_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM1_BRK_UP_TRG_COM_IRQHandler
B TIM1_BRK_UP_TRG_COM_IRQHandler
PUBWEAK TIM1_CC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM1_CC_IRQHandler
B TIM1_CC_IRQHandler
PUBWEAK TIM2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM2_IRQHandler
B TIM2_IRQHandler
PUBWEAK TIM3_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM3_IRQHandler
B TIM3_IRQHandler
PUBWEAK TIM6_DAC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM6_DAC_IRQHandler
B TIM6_DAC_IRQHandler
PUBWEAK TIM7_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM7_IRQHandler
B TIM7_IRQHandler
PUBWEAK TIM14_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM14_IRQHandler
B TIM14_IRQHandler
PUBWEAK TIM15_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM15_IRQHandler
B TIM15_IRQHandler
PUBWEAK TIM16_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM16_IRQHandler
B TIM16_IRQHandler
PUBWEAK TIM17_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM17_IRQHandler
B TIM17_IRQHandler
PUBWEAK I2C1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
I2C1_IRQHandler
B I2C1_IRQHandler
PUBWEAK I2C2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
I2C2_IRQHandler
B I2C2_IRQHandler
PUBWEAK SPI1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
SPI1_IRQHandler
B SPI1_IRQHandler
PUBWEAK SPI2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
SPI2_IRQHandler
B SPI2_IRQHandler
PUBWEAK USART1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
USART1_IRQHandler
B USART1_IRQHandler
PUBWEAK USART2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
USART2_IRQHandler
B USART2_IRQHandler
PUBWEAK USART3_8_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
USART3_8_IRQHandler
B USART3_8_IRQHandler
PUBWEAK CEC_CAN_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
CEC_CAN_IRQHandler
B CEC_CAN_IRQHandler
END
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
|
aegean-odyssey/mpmd_marlin_1.1.x
| 11,305
|
STM32Cube-1.10.1/Projects/STM32F091RC-Nucleo/Examples/PWR/PWR_PVD/MDK-ARM/startup_stm32f091xc.s
|
;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
;* File Name : startup_stm32f091xc.s
;* Author : MCD Application Team
;* Description : STM32F091xc/STM32F098xc devices vector table for MDK-ARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == Reset_Handler
;* - Set the vector table entries with the exceptions ISR address
;* - Branches to __main in the C library (which eventually
;* calls main()).
;* After Reset the CortexM0 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;*******************************************************************************
;
;* Redistribution and use in source and binary forms, with or without modification,
;* are permitted provided that the following conditions are met:
;* 1. Redistributions of source code must retain the above copyright notice,
;* this list of conditions and the following disclaimer.
;* 2. Redistributions in binary form must reproduce the above copyright notice,
;* this list of conditions and the following disclaimer in the documentation
;* and/or other materials provided with the distribution.
;* 3. Neither the name of STMicroelectronics nor the names of its contributors
;* may be used to endorse or promote products derived from this software
;* without specific prior written permission.
;*
;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
;
;*******************************************************************************
; Amount of memory (in bytes) allocated for Stack
; Tailor this value to your application needs
; <h> Stack Configuration
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Stack_Size EQU 0x400;
AREA STACK, NOINIT, READWRITE, ALIGN=3
Stack_Mem SPACE Stack_Size
__initial_sp
; <h> Heap Configuration
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Heap_Size EQU 0x200;
AREA HEAP, NOINIT, READWRITE, ALIGN=3
__heap_base
Heap_Mem SPACE Heap_Size
__heap_limit
PRESERVE8
THUMB
; Vector Table Mapped to Address 0 at Reset
AREA RESET, DATA, READONLY
EXPORT __Vectors
EXPORT __Vectors_End
EXPORT __Vectors_Size
__Vectors DCD __initial_sp ; Top of Stack
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window Watchdog
DCD PVD_VDDIO2_IRQHandler ; PVD through EXTI Line detect
DCD RTC_IRQHandler ; RTC through EXTI Line
DCD FLASH_IRQHandler ; FLASH
DCD RCC_CRS_IRQHandler ; RCC and CRS
DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
DCD TSC_IRQHandler ; TS
DCD DMA1_Ch1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler ; DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2
DCD DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler ; DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5
DCD ADC1_COMP_IRQHandler ; ADC1, COMP1 and COMP2
DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC
DCD TIM7_IRQHandler ; TIM7
DCD TIM14_IRQHandler ; TIM14
DCD TIM15_IRQHandler ; TIM15
DCD TIM16_IRQHandler ; TIM16
DCD TIM17_IRQHandler ; TIM17
DCD I2C1_IRQHandler ; I2C1
DCD I2C2_IRQHandler ; I2C2
DCD SPI1_IRQHandler ; SPI1
DCD SPI2_IRQHandler ; SPI2
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD USART3_8_IRQHandler ; USART3, USART4, USART5, USART6, USART7, USART8
DCD CEC_CAN_IRQHandler ; CEC and CAN
__Vectors_End
__Vectors_Size EQU __Vectors_End - __Vectors
AREA |.text|, CODE, READONLY
; Reset handler routine
Reset_Handler PROC
EXPORT Reset_Handler [WEAK]
IMPORT __main
IMPORT SystemInit
LDR R0, =SystemInit
BLX R0
LDR R0, =__main
BX R0
ENDP
; Dummy Exception Handlers (infinite loops which can be modified)
NMI_Handler PROC
EXPORT NMI_Handler [WEAK]
B .
ENDP
HardFault_Handler\
PROC
EXPORT HardFault_Handler [WEAK]
B .
ENDP
SVC_Handler PROC
EXPORT SVC_Handler [WEAK]
B .
ENDP
PendSV_Handler PROC
EXPORT PendSV_Handler [WEAK]
B .
ENDP
SysTick_Handler PROC
EXPORT SysTick_Handler [WEAK]
B .
ENDP
Default_Handler PROC
EXPORT WWDG_IRQHandler [WEAK]
EXPORT PVD_VDDIO2_IRQHandler [WEAK]
EXPORT RTC_IRQHandler [WEAK]
EXPORT FLASH_IRQHandler [WEAK]
EXPORT RCC_CRS_IRQHandler [WEAK]
EXPORT EXTI0_1_IRQHandler [WEAK]
EXPORT EXTI2_3_IRQHandler [WEAK]
EXPORT EXTI4_15_IRQHandler [WEAK]
EXPORT TSC_IRQHandler [WEAK]
EXPORT DMA1_Ch1_IRQHandler [WEAK]
EXPORT DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler [WEAK]
EXPORT DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler [WEAK]
EXPORT ADC1_COMP_IRQHandler [WEAK]
EXPORT TIM1_BRK_UP_TRG_COM_IRQHandler [WEAK]
EXPORT TIM1_CC_IRQHandler [WEAK]
EXPORT TIM2_IRQHandler [WEAK]
EXPORT TIM3_IRQHandler [WEAK]
EXPORT TIM6_DAC_IRQHandler [WEAK]
EXPORT TIM7_IRQHandler [WEAK]
EXPORT TIM14_IRQHandler [WEAK]
EXPORT TIM15_IRQHandler [WEAK]
EXPORT TIM16_IRQHandler [WEAK]
EXPORT TIM17_IRQHandler [WEAK]
EXPORT I2C1_IRQHandler [WEAK]
EXPORT I2C2_IRQHandler [WEAK]
EXPORT SPI1_IRQHandler [WEAK]
EXPORT SPI2_IRQHandler [WEAK]
EXPORT USART1_IRQHandler [WEAK]
EXPORT USART2_IRQHandler [WEAK]
EXPORT USART3_8_IRQHandler [WEAK]
EXPORT CEC_CAN_IRQHandler [WEAK]
WWDG_IRQHandler
PVD_VDDIO2_IRQHandler
RTC_IRQHandler
FLASH_IRQHandler
RCC_CRS_IRQHandler
EXTI0_1_IRQHandler
EXTI2_3_IRQHandler
EXTI4_15_IRQHandler
TSC_IRQHandler
DMA1_Ch1_IRQHandler
DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
ADC1_COMP_IRQHandler
TIM1_BRK_UP_TRG_COM_IRQHandler
TIM1_CC_IRQHandler
TIM2_IRQHandler
TIM3_IRQHandler
TIM6_DAC_IRQHandler
TIM7_IRQHandler
TIM14_IRQHandler
TIM15_IRQHandler
TIM16_IRQHandler
TIM17_IRQHandler
I2C1_IRQHandler
I2C2_IRQHandler
SPI1_IRQHandler
SPI2_IRQHandler
USART1_IRQHandler
USART2_IRQHandler
USART3_8_IRQHandler
CEC_CAN_IRQHandler
B .
ENDP
ALIGN
;*******************************************************************************
; User Stack and Heap initialization
;*******************************************************************************
IF :DEF:__MICROLIB
EXPORT __initial_sp
EXPORT __heap_base
EXPORT __heap_limit
ELSE
IMPORT __use_two_region_memory
EXPORT __user_initial_stackheap
__user_initial_stackheap
LDR R0, = Heap_Mem
LDR R1, =(Stack_Mem + Stack_Size)
LDR R2, = (Heap_Mem + Heap_Size)
LDR R3, = Stack_Mem
BX LR
ALIGN
ENDIF
END
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
|
aegean-odyssey/mpmd_marlin_1.1.x
| 10,745
|
STM32Cube-1.10.1/Projects/STM32F091RC-Nucleo/Examples/PWR/PWR_PVD/SW4STM32/startup_stm32f091xc.s
|
/**
******************************************************************************
* @file startup_stm32f091xc.s
* @author MCD Application Team
* @brief STM32F091xC devices vector table for GCC toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M0 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
.syntax unified
.cpu cortex-m0
.fpu softvfp
.thumb
.global g_pfnVectors
.global Default_Handler
/* start address for the initialization values of the .data section.
defined in linker script */
.word _sidata
/* start address for the .data section. defined in linker script */
.word _sdata
/* end address for the .data section. defined in linker script */
.word _edata
/* start address for the .bss section. defined in linker script */
.word _sbss
/* end address for the .bss section. defined in linker script */
.word _ebss
.section .text.Reset_Handler
.weak Reset_Handler
.type Reset_Handler, %function
Reset_Handler:
ldr r0, =_estack
mov sp, r0 /* set stack pointer */
/* Copy the data segment initializers from flash to SRAM */
movs r1, #0
b LoopCopyDataInit
CopyDataInit:
ldr r3, =_sidata
ldr r3, [r3, r1]
str r3, [r0, r1]
adds r1, r1, #4
LoopCopyDataInit:
ldr r0, =_sdata
ldr r3, =_edata
adds r2, r0, r1
cmp r2, r3
bcc CopyDataInit
ldr r2, =_sbss
b LoopFillZerobss
/* Zero fill the bss segment. */
FillZerobss:
movs r3, #0
str r3, [r2]
adds r2, r2, #4
LoopFillZerobss:
ldr r3, = _ebss
cmp r2, r3
bcc FillZerobss
/* Call the clock system intitialization function.*/
bl SystemInit
/* Call static constructors */
bl __libc_init_array
/* Call the application's entry point.*/
bl main
LoopForever:
b LoopForever
.size Reset_Handler, .-Reset_Handler
/**
* @brief This is the code that gets called when the processor receives an
* unexpected interrupt. This simply enters an infinite loop, preserving
* the system state for examination by a debugger.
*
* @param None
* @retval : None
*/
.section .text.Default_Handler,"ax",%progbits
Default_Handler:
Infinite_Loop:
b Infinite_Loop
.size Default_Handler, .-Default_Handler
/******************************************************************************
*
* The minimal vector table for a Cortex M0. Note that the proper constructs
* must be placed on this to ensure that it ends up at physical address
* 0x0000.0000.
*
******************************************************************************/
.section .isr_vector,"a",%progbits
.type g_pfnVectors, %object
.size g_pfnVectors, .-g_pfnVectors
g_pfnVectors:
.word _estack
.word Reset_Handler
.word NMI_Handler
.word HardFault_Handler
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word SVC_Handler
.word 0
.word 0
.word PendSV_Handler
.word SysTick_Handler
.word WWDG_IRQHandler /* Window WatchDog */
.word PVD_VDDIO2_IRQHandler /* PVD and VDDIO2 through EXTI Line detect */
.word RTC_IRQHandler /* RTC through the EXTI line */
.word FLASH_IRQHandler /* FLASH */
.word RCC_CRS_IRQHandler /* RCC and CRS */
.word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */
.word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */
.word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */
.word TSC_IRQHandler /* TSC */
.word DMA1_Ch1_IRQHandler /* DMA1 Channel 1 */
.word DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler /* DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2 */
.word DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler /* DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5 */
.word ADC1_COMP_IRQHandler /* ADC1, COMP1 and COMP2 */
.word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */
.word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
.word TIM2_IRQHandler /* TIM2 */
.word TIM3_IRQHandler /* TIM3 */
.word TIM6_DAC_IRQHandler /* TIM6 and DAC */
.word TIM7_IRQHandler /* TIM7 */
.word TIM14_IRQHandler /* TIM14 */
.word TIM15_IRQHandler /* TIM15 */
.word TIM16_IRQHandler /* TIM16 */
.word TIM17_IRQHandler /* TIM17 */
.word I2C1_IRQHandler /* I2C1 */
.word I2C2_IRQHandler /* I2C2 */
.word SPI1_IRQHandler /* SPI1 */
.word SPI2_IRQHandler /* SPI2 */
.word USART1_IRQHandler /* USART1 */
.word USART2_IRQHandler /* USART2 */
.word USART3_8_IRQHandler /* USART3, USART4, USART5, USART6, USART7, USART8 */
.word CEC_CAN_IRQHandler /* CEC and CAN */
/*******************************************************************************
*
* Provide weak aliases for each Exception handler to the Default_Handler.
* As they are weak aliases, any function with the same name will override
* this definition.
*
*******************************************************************************/
.weak NMI_Handler
.thumb_set NMI_Handler,Default_Handler
.weak HardFault_Handler
.thumb_set HardFault_Handler,Default_Handler
.weak SVC_Handler
.thumb_set SVC_Handler,Default_Handler
.weak PendSV_Handler
.thumb_set PendSV_Handler,Default_Handler
.weak SysTick_Handler
.thumb_set SysTick_Handler,Default_Handler
.weak WWDG_IRQHandler
.thumb_set WWDG_IRQHandler,Default_Handler
.weak PVD_VDDIO2_IRQHandler
.thumb_set PVD_VDDIO2_IRQHandler,Default_Handler
.weak RTC_IRQHandler
.thumb_set RTC_IRQHandler,Default_Handler
.weak FLASH_IRQHandler
.thumb_set FLASH_IRQHandler,Default_Handler
.weak RCC_CRS_IRQHandler
.thumb_set RCC_CRS_IRQHandler,Default_Handler
.weak EXTI0_1_IRQHandler
.thumb_set EXTI0_1_IRQHandler,Default_Handler
.weak EXTI2_3_IRQHandler
.thumb_set EXTI2_3_IRQHandler,Default_Handler
.weak EXTI4_15_IRQHandler
.thumb_set EXTI4_15_IRQHandler,Default_Handler
.weak TSC_IRQHandler
.thumb_set TSC_IRQHandler,Default_Handler
.weak DMA1_Ch1_IRQHandler
.thumb_set DMA1_Ch1_IRQHandler,Default_Handler
.weak DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
.thumb_set DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler,Default_Handler
.weak DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
.thumb_set DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler,Default_Handler
.weak ADC1_COMP_IRQHandler
.thumb_set ADC1_COMP_IRQHandler,Default_Handler
.weak TIM1_BRK_UP_TRG_COM_IRQHandler
.thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
.weak TIM1_CC_IRQHandler
.thumb_set TIM1_CC_IRQHandler,Default_Handler
.weak TIM2_IRQHandler
.thumb_set TIM2_IRQHandler,Default_Handler
.weak TIM3_IRQHandler
.thumb_set TIM3_IRQHandler,Default_Handler
.weak TIM6_DAC_IRQHandler
.thumb_set TIM6_DAC_IRQHandler,Default_Handler
.weak TIM7_IRQHandler
.thumb_set TIM7_IRQHandler,Default_Handler
.weak TIM14_IRQHandler
.thumb_set TIM14_IRQHandler,Default_Handler
.weak TIM15_IRQHandler
.thumb_set TIM15_IRQHandler,Default_Handler
.weak TIM16_IRQHandler
.thumb_set TIM16_IRQHandler,Default_Handler
.weak TIM17_IRQHandler
.thumb_set TIM17_IRQHandler,Default_Handler
.weak I2C1_IRQHandler
.thumb_set I2C1_IRQHandler,Default_Handler
.weak I2C2_IRQHandler
.thumb_set I2C2_IRQHandler,Default_Handler
.weak SPI1_IRQHandler
.thumb_set SPI1_IRQHandler,Default_Handler
.weak SPI2_IRQHandler
.thumb_set SPI2_IRQHandler,Default_Handler
.weak USART1_IRQHandler
.thumb_set USART1_IRQHandler,Default_Handler
.weak USART2_IRQHandler
.thumb_set USART2_IRQHandler,Default_Handler
.weak USART3_8_IRQHandler
.thumb_set USART3_8_IRQHandler,Default_Handler
.weak CEC_CAN_IRQHandler
.thumb_set CEC_CAN_IRQHandler,Default_Handler
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
aegean-odyssey/mpmd_marlin_1.1.x
| 11,410
|
STM32Cube-1.10.1/Projects/STM32F091RC-Nucleo/Examples/PWR/PWR_PVD/EWARM/startup_stm32f091xc.s
|
;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
;* File Name : startup_stm32f091xc.s
;* Author : MCD Application Team
;* Description : STM32F091xc/STM32F098xc devices vector table for EWARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == __iar_program_start,
;* - Set the vector table entries with the exceptions ISR
;* address,
;* - Branches to main in the C library (which eventually
;* calls main()).
;* After Reset the Cortex-M0 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;*******************************************************************************
;*
;* Redistribution and use in source and binary forms, with or without modification,
;* are permitted provided that the following conditions are met:
;* 1. Redistributions of source code must retain the above copyright notice,
;* this list of conditions and the following disclaimer.
;* 2. Redistributions in binary form must reproduce the above copyright notice,
;* this list of conditions and the following disclaimer in the documentation
;* and/or other materials provided with the distribution.
;* 3. Neither the name of STMicroelectronics nor the names of its contributors
;* may be used to endorse or promote products derived from this software
;* without specific prior written permission.
;*
;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
;*
;*******************************************************************************
;
;
; The modules in this file are included in the libraries, and may be replaced
; by any user-defined modules that define the PUBLIC symbol _program_start or
; a user defined start symbol.
; To override the cstartup defined in the library, simply add your modified
; version to the workbench project.
;
; The vector table is normally located at address 0.
; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
; The name "__vector_table" has special meaning for C-SPY:
; it is where the SP start value is found, and the NVIC vector
; table register (VTOR) is initialized to this address if != 0.
;
; Cortex-M version
;
MODULE ?cstartup
;; Forward declaration of sections.
SECTION CSTACK:DATA:NOROOT(3)
SECTION .intvec:CODE:NOROOT(2)
EXTERN __iar_program_start
EXTERN SystemInit
PUBLIC __vector_table
DATA
__vector_table
DCD sfe(CSTACK)
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window Watchdog
DCD PVD_VDDIO2_IRQHandler ; PVD and VDDIO2 through EXTI Line detect
DCD RTC_IRQHandler ; RTC through EXTI Line
DCD FLASH_IRQHandler ; FLASH
DCD RCC_CRS_IRQHandler ; RCC and CRS
DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
DCD TSC_IRQHandler ; TS
DCD DMA1_Ch1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler ; DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2
DCD DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler ; DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5
DCD ADC1_COMP_IRQHandler ; ADC1, COMP1 and COMP2
DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC
DCD TIM7_IRQHandler ; TIM7
DCD TIM14_IRQHandler ; TIM14
DCD TIM15_IRQHandler ; TIM15
DCD TIM16_IRQHandler ; TIM16
DCD TIM17_IRQHandler ; TIM17
DCD I2C1_IRQHandler ; I2C1
DCD I2C2_IRQHandler ; I2C2
DCD SPI1_IRQHandler ; SPI1
DCD SPI2_IRQHandler ; SPI2
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD USART3_8_IRQHandler ; USART3, USART4, USART5, USART6, USART7, USART8
DCD CEC_CAN_IRQHandler ; CEC and CAN
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Default interrupt handlers.
;;
THUMB
PUBWEAK Reset_Handler
SECTION .text:CODE:NOROOT:REORDER(2)
Reset_Handler
LDR R0, =SystemInit
BLX R0
LDR R0, =__iar_program_start
BX R0
PUBWEAK NMI_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
NMI_Handler
B NMI_Handler
PUBWEAK HardFault_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
HardFault_Handler
B HardFault_Handler
PUBWEAK SVC_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
SVC_Handler
B SVC_Handler
PUBWEAK PendSV_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
PendSV_Handler
B PendSV_Handler
PUBWEAK SysTick_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
SysTick_Handler
B SysTick_Handler
PUBWEAK WWDG_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
WWDG_IRQHandler
B WWDG_IRQHandler
PUBWEAK PVD_VDDIO2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
PVD_VDDIO2_IRQHandler
B PVD_VDDIO2_IRQHandler
PUBWEAK RTC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
RTC_IRQHandler
B RTC_IRQHandler
PUBWEAK FLASH_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
FLASH_IRQHandler
B FLASH_IRQHandler
PUBWEAK RCC_CRS_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
RCC_CRS_IRQHandler
B RCC_CRS_IRQHandler
PUBWEAK EXTI0_1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI0_1_IRQHandler
B EXTI0_1_IRQHandler
PUBWEAK EXTI2_3_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI2_3_IRQHandler
B EXTI2_3_IRQHandler
PUBWEAK EXTI4_15_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI4_15_IRQHandler
B EXTI4_15_IRQHandler
PUBWEAK TSC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TSC_IRQHandler
B TSC_IRQHandler
PUBWEAK DMA1_Ch1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Ch1_IRQHandler
B DMA1_Ch1_IRQHandler
PUBWEAK DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
B DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
PUBWEAK DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
B DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
PUBWEAK ADC1_COMP_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
ADC1_COMP_IRQHandler
B ADC1_COMP_IRQHandler
PUBWEAK TIM1_BRK_UP_TRG_COM_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM1_BRK_UP_TRG_COM_IRQHandler
B TIM1_BRK_UP_TRG_COM_IRQHandler
PUBWEAK TIM1_CC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM1_CC_IRQHandler
B TIM1_CC_IRQHandler
PUBWEAK TIM2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM2_IRQHandler
B TIM2_IRQHandler
PUBWEAK TIM3_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM3_IRQHandler
B TIM3_IRQHandler
PUBWEAK TIM6_DAC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM6_DAC_IRQHandler
B TIM6_DAC_IRQHandler
PUBWEAK TIM7_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM7_IRQHandler
B TIM7_IRQHandler
PUBWEAK TIM14_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM14_IRQHandler
B TIM14_IRQHandler
PUBWEAK TIM15_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM15_IRQHandler
B TIM15_IRQHandler
PUBWEAK TIM16_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM16_IRQHandler
B TIM16_IRQHandler
PUBWEAK TIM17_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM17_IRQHandler
B TIM17_IRQHandler
PUBWEAK I2C1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
I2C1_IRQHandler
B I2C1_IRQHandler
PUBWEAK I2C2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
I2C2_IRQHandler
B I2C2_IRQHandler
PUBWEAK SPI1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
SPI1_IRQHandler
B SPI1_IRQHandler
PUBWEAK SPI2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
SPI2_IRQHandler
B SPI2_IRQHandler
PUBWEAK USART1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
USART1_IRQHandler
B USART1_IRQHandler
PUBWEAK USART2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
USART2_IRQHandler
B USART2_IRQHandler
PUBWEAK USART3_8_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
USART3_8_IRQHandler
B USART3_8_IRQHandler
PUBWEAK CEC_CAN_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
CEC_CAN_IRQHandler
B CEC_CAN_IRQHandler
END
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
|
aenu1/aps3e
| 15,839
|
app/src/main/cpp/rpcs3/3rdparty/zlib/zlib/contrib/gcc_gvmat64/gvmat64.S
|
/*
;uInt longest_match_x64(
; deflate_state *s,
; IPos cur_match); // current match
; gvmat64.S -- Asm portion of the optimized longest_match for 32 bits x86_64
; (AMD64 on Athlon 64, Opteron, Phenom
; and Intel EM64T on Pentium 4 with EM64T, Pentium D, Core 2 Duo, Core I5/I7)
; this file is translation from gvmat64.asm to GCC 4.x (for Linux, Mac XCode)
; Copyright (C) 1995-2010 Jean-loup Gailly, Brian Raiter and Gilles Vollant.
;
; File written by Gilles Vollant, by converting to assembly the longest_match
; from Jean-loup Gailly in deflate.c of zLib and infoZip zip.
; and by taking inspiration on asm686 with masm, optimised assembly code
; from Brian Raiter, written 1998
;
; This software is provided 'as-is', without any express or implied
; warranty. In no event will the authors be held liable for any damages
; arising from the use of this software.
;
; Permission is granted to anyone to use this software for any purpose,
; including commercial applications, and to alter it and redistribute it
; freely, subject to the following restrictions:
;
; 1. The origin of this software must not be misrepresented; you must not
; claim that you wrote the original software. If you use this software
; in a product, an acknowledgment in the product documentation would be
; appreciated but is not required.
; 2. Altered source versions must be plainly marked as such, and must not be
; misrepresented as being the original software
; 3. This notice may not be removed or altered from any source distribution.
;
; http://www.zlib.net
; http://www.winimage.com/zLibDll
; http://www.muppetlabs.com/~breadbox/software/assembly.html
;
; to compile this file for zLib, I use option:
; gcc -c -arch x86_64 gvmat64.S
;uInt longest_match(s, cur_match)
; deflate_state *s;
; IPos cur_match; // current match /
;
; with XCode for Mac, I had strange error with some jump on intel syntax
; this is why BEFORE_JMP and AFTER_JMP are used
*/
#define BEFORE_JMP .att_syntax
#define AFTER_JMP .intel_syntax noprefix
#ifndef NO_UNDERLINE
# define match_init _match_init
# define longest_match _longest_match
#endif
.intel_syntax noprefix
.globl match_init, longest_match
.text
longest_match:
#define LocalVarsSize 96
/*
; register used : rax,rbx,rcx,rdx,rsi,rdi,r8,r9,r10,r11,r12
; free register : r14,r15
; register can be saved : rsp
*/
#define chainlenwmask (rsp + 8 - LocalVarsSize)
#define nicematch (rsp + 16 - LocalVarsSize)
#define save_rdi (rsp + 24 - LocalVarsSize)
#define save_rsi (rsp + 32 - LocalVarsSize)
#define save_rbx (rsp + 40 - LocalVarsSize)
#define save_rbp (rsp + 48 - LocalVarsSize)
#define save_r12 (rsp + 56 - LocalVarsSize)
#define save_r13 (rsp + 64 - LocalVarsSize)
#define save_r14 (rsp + 72 - LocalVarsSize)
#define save_r15 (rsp + 80 - LocalVarsSize)
/*
; all the +4 offsets are due to the addition of pending_buf_size (in zlib
; in the deflate_state structure since the asm code was first written
; (if you compile with zlib 1.0.4 or older, remove the +4).
; Note : these value are good with a 8 bytes boundary pack structure
*/
#define MAX_MATCH 258
#define MIN_MATCH 3
#define MIN_LOOKAHEAD (MAX_MATCH+MIN_MATCH+1)
/*
;;; Offsets for fields in the deflate_state structure. These numbers
;;; are calculated from the definition of deflate_state, with the
;;; assumption that the compiler will dword-align the fields. (Thus,
;;; changing the definition of deflate_state could easily cause this
;;; program to crash horribly, without so much as a warning at
;;; compile time. Sigh.)
; all the +zlib1222add offsets are due to the addition of fields
; in zlib in the deflate_state structure since the asm code was first written
; (if you compile with zlib 1.0.4 or older, use "zlib1222add equ (-4)").
; (if you compile with zlib between 1.0.5 and 1.2.2.1, use "zlib1222add equ 0").
; if you compile with zlib 1.2.2.2 or later , use "zlib1222add equ 8").
*/
/* you can check the structure offset by running
#include <stdlib.h>
#include <stdio.h>
#include "deflate.h"
void print_depl()
{
deflate_state ds;
deflate_state *s=&ds;
printf("size pointer=%u\n",(int)sizeof(void*));
printf("#define dsWSize %u\n",(int)(((char*)&(s->w_size))-((char*)s)));
printf("#define dsWMask %u\n",(int)(((char*)&(s->w_mask))-((char*)s)));
printf("#define dsWindow %u\n",(int)(((char*)&(s->window))-((char*)s)));
printf("#define dsPrev %u\n",(int)(((char*)&(s->prev))-((char*)s)));
printf("#define dsMatchLen %u\n",(int)(((char*)&(s->match_length))-((char*)s)));
printf("#define dsPrevMatch %u\n",(int)(((char*)&(s->prev_match))-((char*)s)));
printf("#define dsStrStart %u\n",(int)(((char*)&(s->strstart))-((char*)s)));
printf("#define dsMatchStart %u\n",(int)(((char*)&(s->match_start))-((char*)s)));
printf("#define dsLookahead %u\n",(int)(((char*)&(s->lookahead))-((char*)s)));
printf("#define dsPrevLen %u\n",(int)(((char*)&(s->prev_length))-((char*)s)));
printf("#define dsMaxChainLen %u\n",(int)(((char*)&(s->max_chain_length))-((char*)s)));
printf("#define dsGoodMatch %u\n",(int)(((char*)&(s->good_match))-((char*)s)));
printf("#define dsNiceMatch %u\n",(int)(((char*)&(s->nice_match))-((char*)s)));
}
*/
#define dsWSize 68
#define dsWMask 76
#define dsWindow 80
#define dsPrev 96
#define dsMatchLen 144
#define dsPrevMatch 148
#define dsStrStart 156
#define dsMatchStart 160
#define dsLookahead 164
#define dsPrevLen 168
#define dsMaxChainLen 172
#define dsGoodMatch 188
#define dsNiceMatch 192
#define window_size [ rcx + dsWSize]
#define WMask [ rcx + dsWMask]
#define window_ad [ rcx + dsWindow]
#define prev_ad [ rcx + dsPrev]
#define strstart [ rcx + dsStrStart]
#define match_start [ rcx + dsMatchStart]
#define Lookahead [ rcx + dsLookahead] //; 0ffffffffh on infozip
#define prev_length [ rcx + dsPrevLen]
#define max_chain_length [ rcx + dsMaxChainLen]
#define good_match [ rcx + dsGoodMatch]
#define nice_match [ rcx + dsNiceMatch]
/*
; windows:
; parameter 1 in rcx(deflate state s), param 2 in rdx (cur match)
; see http://weblogs.asp.net/oldnewthing/archive/2004/01/14/58579.aspx and
; http://msdn.microsoft.com/library/en-us/kmarch/hh/kmarch/64bitAMD_8e951dd2-ee77-4728-8702-55ce4b5dd24a.xml.asp
;
; All registers must be preserved across the call, except for
; rax, rcx, rdx, r8, r9, r10, and r11, which are scratch.
;
; gcc on macosx-linux:
; see http://www.x86-64.org/documentation/abi-0.99.pdf
; param 1 in rdi, param 2 in rsi
; rbx, rsp, rbp, r12 to r15 must be preserved
;;; Save registers that the compiler may be using, and adjust esp to
;;; make room for our stack frame.
;;; Retrieve the function arguments. r8d will hold cur_match
;;; throughout the entire function. edx will hold the pointer to the
;;; deflate_state structure during the function's setup (before
;;; entering the main loop.
; ms: parameter 1 in rcx (deflate_state* s), param 2 in edx -> r8 (cur match)
; mac: param 1 in rdi, param 2 rsi
; this clear high 32 bits of r8, which can be garbage in both r8 and rdx
*/
mov [save_rbx],rbx
mov [save_rbp],rbp
mov rcx,rdi
mov r8d,esi
mov [save_r12],r12
mov [save_r13],r13
mov [save_r14],r14
mov [save_r15],r15
//;;; uInt wmask = s->w_mask;
//;;; unsigned chain_length = s->max_chain_length;
//;;; if (s->prev_length >= s->good_match) {
//;;; chain_length >>= 2;
//;;; }
mov edi, prev_length
mov esi, good_match
mov eax, WMask
mov ebx, max_chain_length
cmp edi, esi
jl LastMatchGood
shr ebx, 2
LastMatchGood:
//;;; chainlen is decremented once beforehand so that the function can
//;;; use the sign flag instead of the zero flag for the exit test.
//;;; It is then shifted into the high word, to make room for the wmask
//;;; value, which it will always accompany.
dec ebx
shl ebx, 16
or ebx, eax
//;;; on zlib only
//;;; if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead;
mov eax, nice_match
mov [chainlenwmask], ebx
mov r10d, Lookahead
cmp r10d, eax
cmovnl r10d, eax
mov [nicematch],r10d
//;;; register Bytef *scan = s->window + s->strstart;
mov r10, window_ad
mov ebp, strstart
lea r13, [r10 + rbp]
//;;; Determine how many bytes the scan ptr is off from being
//;;; dword-aligned.
mov r9,r13
neg r13
and r13,3
//;;; IPos limit = s->strstart > (IPos)MAX_DIST(s) ?
//;;; s->strstart - (IPos)MAX_DIST(s) : NIL;
mov eax, window_size
sub eax, MIN_LOOKAHEAD
xor edi,edi
sub ebp, eax
mov r11d, prev_length
cmovng ebp,edi
//;;; int best_len = s->prev_length;
//;;; Store the sum of s->window + best_len in esi locally, and in esi.
lea rsi,[r10+r11]
//;;; register ush scan_start = *(ushf*)scan;
//;;; register ush scan_end = *(ushf*)(scan+best_len-1);
//;;; Posf *prev = s->prev;
movzx r12d,word ptr [r9]
movzx ebx, word ptr [r9 + r11 - 1]
mov rdi, prev_ad
//;;; Jump into the main loop.
mov edx, [chainlenwmask]
cmp bx,word ptr [rsi + r8 - 1]
jz LookupLoopIsZero
LookupLoop1:
and r8d, edx
movzx r8d, word ptr [rdi + r8*2]
cmp r8d, ebp
jbe LeaveNow
sub edx, 0x00010000
BEFORE_JMP
js LeaveNow
AFTER_JMP
LoopEntry1:
cmp bx,word ptr [rsi + r8 - 1]
BEFORE_JMP
jz LookupLoopIsZero
AFTER_JMP
LookupLoop2:
and r8d, edx
movzx r8d, word ptr [rdi + r8*2]
cmp r8d, ebp
BEFORE_JMP
jbe LeaveNow
AFTER_JMP
sub edx, 0x00010000
BEFORE_JMP
js LeaveNow
AFTER_JMP
LoopEntry2:
cmp bx,word ptr [rsi + r8 - 1]
BEFORE_JMP
jz LookupLoopIsZero
AFTER_JMP
LookupLoop4:
and r8d, edx
movzx r8d, word ptr [rdi + r8*2]
cmp r8d, ebp
BEFORE_JMP
jbe LeaveNow
AFTER_JMP
sub edx, 0x00010000
BEFORE_JMP
js LeaveNow
AFTER_JMP
LoopEntry4:
cmp bx,word ptr [rsi + r8 - 1]
BEFORE_JMP
jnz LookupLoop1
jmp LookupLoopIsZero
AFTER_JMP
/*
;;; do {
;;; match = s->window + cur_match;
;;; if (*(ushf*)(match+best_len-1) != scan_end ||
;;; *(ushf*)match != scan_start) continue;
;;; [...]
;;; } while ((cur_match = prev[cur_match & wmask]) > limit
;;; && --chain_length != 0);
;;;
;;; Here is the inner loop of the function. The function will spend the
;;; majority of its time in this loop, and majority of that time will
;;; be spent in the first ten instructions.
;;;
;;; Within this loop:
;;; ebx = scanend
;;; r8d = curmatch
;;; edx = chainlenwmask - i.e., ((chainlen << 16) | wmask)
;;; esi = windowbestlen - i.e., (window + bestlen)
;;; edi = prev
;;; ebp = limit
*/
.balign 16
LookupLoop:
and r8d, edx
movzx r8d, word ptr [rdi + r8*2]
cmp r8d, ebp
BEFORE_JMP
jbe LeaveNow
AFTER_JMP
sub edx, 0x00010000
BEFORE_JMP
js LeaveNow
AFTER_JMP
LoopEntry:
cmp bx,word ptr [rsi + r8 - 1]
BEFORE_JMP
jnz LookupLoop1
AFTER_JMP
LookupLoopIsZero:
cmp r12w, word ptr [r10 + r8]
BEFORE_JMP
jnz LookupLoop1
AFTER_JMP
//;;; Store the current value of chainlen.
mov [chainlenwmask], edx
/*
;;; Point edi to the string under scrutiny, and esi to the string we
;;; are hoping to match it up with. In actuality, esi and edi are
;;; both pointed (MAX_MATCH_8 - scanalign) bytes ahead, and edx is
;;; initialized to -(MAX_MATCH_8 - scanalign).
*/
lea rsi,[r8+r10]
mov rdx, 0xfffffffffffffef8 //; -(MAX_MATCH_8)
lea rsi, [rsi + r13 + 0x0108] //;MAX_MATCH_8]
lea rdi, [r9 + r13 + 0x0108] //;MAX_MATCH_8]
prefetcht1 [rsi+rdx]
prefetcht1 [rdi+rdx]
/*
;;; Test the strings for equality, 8 bytes at a time. At the end,
;;; adjust rdx so that it is offset to the exact byte that mismatched.
;;;
;;; We already know at this point that the first three bytes of the
;;; strings match each other, and they can be safely passed over before
;;; starting the compare loop. So what this code does is skip over 0-3
;;; bytes, as much as necessary in order to dword-align the edi
;;; pointer. (rsi will still be misaligned three times out of four.)
;;;
;;; It should be confessed that this loop usually does not represent
;;; much of the total running time. Replacing it with a more
;;; straightforward "rep cmpsb" would not drastically degrade
;;; performance.
*/
LoopCmps:
mov rax, [rsi + rdx]
xor rax, [rdi + rdx]
jnz LeaveLoopCmps
mov rax, [rsi + rdx + 8]
xor rax, [rdi + rdx + 8]
jnz LeaveLoopCmps8
mov rax, [rsi + rdx + 8+8]
xor rax, [rdi + rdx + 8+8]
jnz LeaveLoopCmps16
add rdx,8+8+8
BEFORE_JMP
jnz LoopCmps
jmp LenMaximum
AFTER_JMP
LeaveLoopCmps16: add rdx,8
LeaveLoopCmps8: add rdx,8
LeaveLoopCmps:
test eax, 0x0000FFFF
jnz LenLower
test eax,0xffffffff
jnz LenLower32
add rdx,4
shr rax,32
or ax,ax
BEFORE_JMP
jnz LenLower
AFTER_JMP
LenLower32:
shr eax,16
add rdx,2
LenLower:
sub al, 1
adc rdx, 0
//;;; Calculate the length of the match. If it is longer than MAX_MATCH,
//;;; then automatically accept it as the best possible match and leave.
lea rax, [rdi + rdx]
sub rax, r9
cmp eax, MAX_MATCH
BEFORE_JMP
jge LenMaximum
AFTER_JMP
/*
;;; If the length of the match is not longer than the best match we
;;; have so far, then forget it and return to the lookup loop.
;///////////////////////////////////
*/
cmp eax, r11d
jg LongerMatch
lea rsi,[r10+r11]
mov rdi, prev_ad
mov edx, [chainlenwmask]
BEFORE_JMP
jmp LookupLoop
AFTER_JMP
/*
;;; s->match_start = cur_match;
;;; best_len = len;
;;; if (len >= nice_match) break;
;;; scan_end = *(ushf*)(scan+best_len-1);
*/
LongerMatch:
mov r11d, eax
mov match_start, r8d
cmp eax, [nicematch]
BEFORE_JMP
jge LeaveNow
AFTER_JMP
lea rsi,[r10+rax]
movzx ebx, word ptr [r9 + rax - 1]
mov rdi, prev_ad
mov edx, [chainlenwmask]
BEFORE_JMP
jmp LookupLoop
AFTER_JMP
//;;; Accept the current string, with the maximum possible length.
LenMaximum:
mov r11d,MAX_MATCH
mov match_start, r8d
//;;; if ((uInt)best_len <= s->lookahead) return (uInt)best_len;
//;;; return s->lookahead;
LeaveNow:
mov eax, Lookahead
cmp r11d, eax
cmovng eax, r11d
//;;; Restore the stack and return from whence we came.
// mov rsi,[save_rsi]
// mov rdi,[save_rdi]
mov rbx,[save_rbx]
mov rbp,[save_rbp]
mov r12,[save_r12]
mov r13,[save_r13]
mov r14,[save_r14]
mov r15,[save_r15]
ret 0
//; please don't remove this string !
//; Your can freely use gvmat64 in any free or commercial app
//; but it is far better don't remove the string in the binary!
// db 0dh,0ah,"asm686 with masm, optimised assembly code from Brian Raiter, written 1998, converted to amd 64 by Gilles Vollant 2005",0dh,0ah,0
match_init:
ret 0
|
aegean-odyssey/mpmd_marlin_1.1.x
| 11,305
|
STM32Cube-1.10.1/Projects/STM32F091RC-Nucleo/Examples/PWR/PWR_CurrentConsumption/MDK-ARM/startup_stm32f091xc.s
|
;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
;* File Name : startup_stm32f091xc.s
;* Author : MCD Application Team
;* Description : STM32F091xc/STM32F098xc devices vector table for MDK-ARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == Reset_Handler
;* - Set the vector table entries with the exceptions ISR address
;* - Branches to __main in the C library (which eventually
;* calls main()).
;* After Reset the CortexM0 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;*******************************************************************************
;
;* Redistribution and use in source and binary forms, with or without modification,
;* are permitted provided that the following conditions are met:
;* 1. Redistributions of source code must retain the above copyright notice,
;* this list of conditions and the following disclaimer.
;* 2. Redistributions in binary form must reproduce the above copyright notice,
;* this list of conditions and the following disclaimer in the documentation
;* and/or other materials provided with the distribution.
;* 3. Neither the name of STMicroelectronics nor the names of its contributors
;* may be used to endorse or promote products derived from this software
;* without specific prior written permission.
;*
;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
;
;*******************************************************************************
; Amount of memory (in bytes) allocated for Stack
; Tailor this value to your application needs
; <h> Stack Configuration
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Stack_Size EQU 0x400;
AREA STACK, NOINIT, READWRITE, ALIGN=3
Stack_Mem SPACE Stack_Size
__initial_sp
; <h> Heap Configuration
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Heap_Size EQU 0x200;
AREA HEAP, NOINIT, READWRITE, ALIGN=3
__heap_base
Heap_Mem SPACE Heap_Size
__heap_limit
PRESERVE8
THUMB
; Vector Table Mapped to Address 0 at Reset
AREA RESET, DATA, READONLY
EXPORT __Vectors
EXPORT __Vectors_End
EXPORT __Vectors_Size
__Vectors DCD __initial_sp ; Top of Stack
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window Watchdog
DCD PVD_VDDIO2_IRQHandler ; PVD through EXTI Line detect
DCD RTC_IRQHandler ; RTC through EXTI Line
DCD FLASH_IRQHandler ; FLASH
DCD RCC_CRS_IRQHandler ; RCC and CRS
DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
DCD TSC_IRQHandler ; TS
DCD DMA1_Ch1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler ; DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2
DCD DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler ; DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5
DCD ADC1_COMP_IRQHandler ; ADC1, COMP1 and COMP2
DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC
DCD TIM7_IRQHandler ; TIM7
DCD TIM14_IRQHandler ; TIM14
DCD TIM15_IRQHandler ; TIM15
DCD TIM16_IRQHandler ; TIM16
DCD TIM17_IRQHandler ; TIM17
DCD I2C1_IRQHandler ; I2C1
DCD I2C2_IRQHandler ; I2C2
DCD SPI1_IRQHandler ; SPI1
DCD SPI2_IRQHandler ; SPI2
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD USART3_8_IRQHandler ; USART3, USART4, USART5, USART6, USART7, USART8
DCD CEC_CAN_IRQHandler ; CEC and CAN
__Vectors_End
__Vectors_Size EQU __Vectors_End - __Vectors
AREA |.text|, CODE, READONLY
; Reset handler routine
Reset_Handler PROC
EXPORT Reset_Handler [WEAK]
IMPORT __main
IMPORT SystemInit
LDR R0, =SystemInit
BLX R0
LDR R0, =__main
BX R0
ENDP
; Dummy Exception Handlers (infinite loops which can be modified)
NMI_Handler PROC
EXPORT NMI_Handler [WEAK]
B .
ENDP
HardFault_Handler\
PROC
EXPORT HardFault_Handler [WEAK]
B .
ENDP
SVC_Handler PROC
EXPORT SVC_Handler [WEAK]
B .
ENDP
PendSV_Handler PROC
EXPORT PendSV_Handler [WEAK]
B .
ENDP
SysTick_Handler PROC
EXPORT SysTick_Handler [WEAK]
B .
ENDP
Default_Handler PROC
EXPORT WWDG_IRQHandler [WEAK]
EXPORT PVD_VDDIO2_IRQHandler [WEAK]
EXPORT RTC_IRQHandler [WEAK]
EXPORT FLASH_IRQHandler [WEAK]
EXPORT RCC_CRS_IRQHandler [WEAK]
EXPORT EXTI0_1_IRQHandler [WEAK]
EXPORT EXTI2_3_IRQHandler [WEAK]
EXPORT EXTI4_15_IRQHandler [WEAK]
EXPORT TSC_IRQHandler [WEAK]
EXPORT DMA1_Ch1_IRQHandler [WEAK]
EXPORT DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler [WEAK]
EXPORT DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler [WEAK]
EXPORT ADC1_COMP_IRQHandler [WEAK]
EXPORT TIM1_BRK_UP_TRG_COM_IRQHandler [WEAK]
EXPORT TIM1_CC_IRQHandler [WEAK]
EXPORT TIM2_IRQHandler [WEAK]
EXPORT TIM3_IRQHandler [WEAK]
EXPORT TIM6_DAC_IRQHandler [WEAK]
EXPORT TIM7_IRQHandler [WEAK]
EXPORT TIM14_IRQHandler [WEAK]
EXPORT TIM15_IRQHandler [WEAK]
EXPORT TIM16_IRQHandler [WEAK]
EXPORT TIM17_IRQHandler [WEAK]
EXPORT I2C1_IRQHandler [WEAK]
EXPORT I2C2_IRQHandler [WEAK]
EXPORT SPI1_IRQHandler [WEAK]
EXPORT SPI2_IRQHandler [WEAK]
EXPORT USART1_IRQHandler [WEAK]
EXPORT USART2_IRQHandler [WEAK]
EXPORT USART3_8_IRQHandler [WEAK]
EXPORT CEC_CAN_IRQHandler [WEAK]
WWDG_IRQHandler
PVD_VDDIO2_IRQHandler
RTC_IRQHandler
FLASH_IRQHandler
RCC_CRS_IRQHandler
EXTI0_1_IRQHandler
EXTI2_3_IRQHandler
EXTI4_15_IRQHandler
TSC_IRQHandler
DMA1_Ch1_IRQHandler
DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
ADC1_COMP_IRQHandler
TIM1_BRK_UP_TRG_COM_IRQHandler
TIM1_CC_IRQHandler
TIM2_IRQHandler
TIM3_IRQHandler
TIM6_DAC_IRQHandler
TIM7_IRQHandler
TIM14_IRQHandler
TIM15_IRQHandler
TIM16_IRQHandler
TIM17_IRQHandler
I2C1_IRQHandler
I2C2_IRQHandler
SPI1_IRQHandler
SPI2_IRQHandler
USART1_IRQHandler
USART2_IRQHandler
USART3_8_IRQHandler
CEC_CAN_IRQHandler
B .
ENDP
ALIGN
;*******************************************************************************
; User Stack and Heap initialization
;*******************************************************************************
IF :DEF:__MICROLIB
EXPORT __initial_sp
EXPORT __heap_base
EXPORT __heap_limit
ELSE
IMPORT __use_two_region_memory
EXPORT __user_initial_stackheap
__user_initial_stackheap
LDR R0, = Heap_Mem
LDR R1, =(Stack_Mem + Stack_Size)
LDR R2, = (Heap_Mem + Heap_Size)
LDR R3, = Stack_Mem
BX LR
ALIGN
ENDIF
END
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
|
aegean-odyssey/mpmd_marlin_1.1.x
| 10,745
|
STM32Cube-1.10.1/Projects/STM32F091RC-Nucleo/Examples/PWR/PWR_CurrentConsumption/SW4STM32/startup_stm32f091xc.s
|
/**
******************************************************************************
* @file startup_stm32f091xc.s
* @author MCD Application Team
* @brief STM32F091xC devices vector table for GCC toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M0 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
.syntax unified
.cpu cortex-m0
.fpu softvfp
.thumb
.global g_pfnVectors
.global Default_Handler
/* start address for the initialization values of the .data section.
defined in linker script */
.word _sidata
/* start address for the .data section. defined in linker script */
.word _sdata
/* end address for the .data section. defined in linker script */
.word _edata
/* start address for the .bss section. defined in linker script */
.word _sbss
/* end address for the .bss section. defined in linker script */
.word _ebss
.section .text.Reset_Handler
.weak Reset_Handler
.type Reset_Handler, %function
Reset_Handler:
ldr r0, =_estack
mov sp, r0 /* set stack pointer */
/* Copy the data segment initializers from flash to SRAM */
movs r1, #0
b LoopCopyDataInit
CopyDataInit:
ldr r3, =_sidata
ldr r3, [r3, r1]
str r3, [r0, r1]
adds r1, r1, #4
LoopCopyDataInit:
ldr r0, =_sdata
ldr r3, =_edata
adds r2, r0, r1
cmp r2, r3
bcc CopyDataInit
ldr r2, =_sbss
b LoopFillZerobss
/* Zero fill the bss segment. */
FillZerobss:
movs r3, #0
str r3, [r2]
adds r2, r2, #4
LoopFillZerobss:
ldr r3, = _ebss
cmp r2, r3
bcc FillZerobss
/* Call the clock system intitialization function.*/
bl SystemInit
/* Call static constructors */
bl __libc_init_array
/* Call the application's entry point.*/
bl main
LoopForever:
b LoopForever
.size Reset_Handler, .-Reset_Handler
/**
* @brief This is the code that gets called when the processor receives an
* unexpected interrupt. This simply enters an infinite loop, preserving
* the system state for examination by a debugger.
*
* @param None
* @retval : None
*/
.section .text.Default_Handler,"ax",%progbits
Default_Handler:
Infinite_Loop:
b Infinite_Loop
.size Default_Handler, .-Default_Handler
/******************************************************************************
*
* The minimal vector table for a Cortex M0. Note that the proper constructs
* must be placed on this to ensure that it ends up at physical address
* 0x0000.0000.
*
******************************************************************************/
.section .isr_vector,"a",%progbits
.type g_pfnVectors, %object
.size g_pfnVectors, .-g_pfnVectors
g_pfnVectors:
.word _estack
.word Reset_Handler
.word NMI_Handler
.word HardFault_Handler
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word SVC_Handler
.word 0
.word 0
.word PendSV_Handler
.word SysTick_Handler
.word WWDG_IRQHandler /* Window WatchDog */
.word PVD_VDDIO2_IRQHandler /* PVD and VDDIO2 through EXTI Line detect */
.word RTC_IRQHandler /* RTC through the EXTI line */
.word FLASH_IRQHandler /* FLASH */
.word RCC_CRS_IRQHandler /* RCC and CRS */
.word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */
.word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */
.word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */
.word TSC_IRQHandler /* TSC */
.word DMA1_Ch1_IRQHandler /* DMA1 Channel 1 */
.word DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler /* DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2 */
.word DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler /* DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5 */
.word ADC1_COMP_IRQHandler /* ADC1, COMP1 and COMP2 */
.word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */
.word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
.word TIM2_IRQHandler /* TIM2 */
.word TIM3_IRQHandler /* TIM3 */
.word TIM6_DAC_IRQHandler /* TIM6 and DAC */
.word TIM7_IRQHandler /* TIM7 */
.word TIM14_IRQHandler /* TIM14 */
.word TIM15_IRQHandler /* TIM15 */
.word TIM16_IRQHandler /* TIM16 */
.word TIM17_IRQHandler /* TIM17 */
.word I2C1_IRQHandler /* I2C1 */
.word I2C2_IRQHandler /* I2C2 */
.word SPI1_IRQHandler /* SPI1 */
.word SPI2_IRQHandler /* SPI2 */
.word USART1_IRQHandler /* USART1 */
.word USART2_IRQHandler /* USART2 */
.word USART3_8_IRQHandler /* USART3, USART4, USART5, USART6, USART7, USART8 */
.word CEC_CAN_IRQHandler /* CEC and CAN */
/*******************************************************************************
*
* Provide weak aliases for each Exception handler to the Default_Handler.
* As they are weak aliases, any function with the same name will override
* this definition.
*
*******************************************************************************/
.weak NMI_Handler
.thumb_set NMI_Handler,Default_Handler
.weak HardFault_Handler
.thumb_set HardFault_Handler,Default_Handler
.weak SVC_Handler
.thumb_set SVC_Handler,Default_Handler
.weak PendSV_Handler
.thumb_set PendSV_Handler,Default_Handler
.weak SysTick_Handler
.thumb_set SysTick_Handler,Default_Handler
.weak WWDG_IRQHandler
.thumb_set WWDG_IRQHandler,Default_Handler
.weak PVD_VDDIO2_IRQHandler
.thumb_set PVD_VDDIO2_IRQHandler,Default_Handler
.weak RTC_IRQHandler
.thumb_set RTC_IRQHandler,Default_Handler
.weak FLASH_IRQHandler
.thumb_set FLASH_IRQHandler,Default_Handler
.weak RCC_CRS_IRQHandler
.thumb_set RCC_CRS_IRQHandler,Default_Handler
.weak EXTI0_1_IRQHandler
.thumb_set EXTI0_1_IRQHandler,Default_Handler
.weak EXTI2_3_IRQHandler
.thumb_set EXTI2_3_IRQHandler,Default_Handler
.weak EXTI4_15_IRQHandler
.thumb_set EXTI4_15_IRQHandler,Default_Handler
.weak TSC_IRQHandler
.thumb_set TSC_IRQHandler,Default_Handler
.weak DMA1_Ch1_IRQHandler
.thumb_set DMA1_Ch1_IRQHandler,Default_Handler
.weak DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
.thumb_set DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler,Default_Handler
.weak DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
.thumb_set DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler,Default_Handler
.weak ADC1_COMP_IRQHandler
.thumb_set ADC1_COMP_IRQHandler,Default_Handler
.weak TIM1_BRK_UP_TRG_COM_IRQHandler
.thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
.weak TIM1_CC_IRQHandler
.thumb_set TIM1_CC_IRQHandler,Default_Handler
.weak TIM2_IRQHandler
.thumb_set TIM2_IRQHandler,Default_Handler
.weak TIM3_IRQHandler
.thumb_set TIM3_IRQHandler,Default_Handler
.weak TIM6_DAC_IRQHandler
.thumb_set TIM6_DAC_IRQHandler,Default_Handler
.weak TIM7_IRQHandler
.thumb_set TIM7_IRQHandler,Default_Handler
.weak TIM14_IRQHandler
.thumb_set TIM14_IRQHandler,Default_Handler
.weak TIM15_IRQHandler
.thumb_set TIM15_IRQHandler,Default_Handler
.weak TIM16_IRQHandler
.thumb_set TIM16_IRQHandler,Default_Handler
.weak TIM17_IRQHandler
.thumb_set TIM17_IRQHandler,Default_Handler
.weak I2C1_IRQHandler
.thumb_set I2C1_IRQHandler,Default_Handler
.weak I2C2_IRQHandler
.thumb_set I2C2_IRQHandler,Default_Handler
.weak SPI1_IRQHandler
.thumb_set SPI1_IRQHandler,Default_Handler
.weak SPI2_IRQHandler
.thumb_set SPI2_IRQHandler,Default_Handler
.weak USART1_IRQHandler
.thumb_set USART1_IRQHandler,Default_Handler
.weak USART2_IRQHandler
.thumb_set USART2_IRQHandler,Default_Handler
.weak USART3_8_IRQHandler
.thumb_set USART3_8_IRQHandler,Default_Handler
.weak CEC_CAN_IRQHandler
.thumb_set CEC_CAN_IRQHandler,Default_Handler
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
aegean-odyssey/mpmd_marlin_1.1.x
| 11,410
|
STM32Cube-1.10.1/Projects/STM32F091RC-Nucleo/Examples/PWR/PWR_CurrentConsumption/EWARM/startup_stm32f091xc.s
|
;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
;* File Name : startup_stm32f091xc.s
;* Author : MCD Application Team
;* Description : STM32F091xc/STM32F098xc devices vector table for EWARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == __iar_program_start,
;* - Set the vector table entries with the exceptions ISR
;* address,
;* - Branches to main in the C library (which eventually
;* calls main()).
;* After Reset the Cortex-M0 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;*******************************************************************************
;*
;* Redistribution and use in source and binary forms, with or without modification,
;* are permitted provided that the following conditions are met:
;* 1. Redistributions of source code must retain the above copyright notice,
;* this list of conditions and the following disclaimer.
;* 2. Redistributions in binary form must reproduce the above copyright notice,
;* this list of conditions and the following disclaimer in the documentation
;* and/or other materials provided with the distribution.
;* 3. Neither the name of STMicroelectronics nor the names of its contributors
;* may be used to endorse or promote products derived from this software
;* without specific prior written permission.
;*
;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
;*
;*******************************************************************************
;
;
; The modules in this file are included in the libraries, and may be replaced
; by any user-defined modules that define the PUBLIC symbol _program_start or
; a user defined start symbol.
; To override the cstartup defined in the library, simply add your modified
; version to the workbench project.
;
; The vector table is normally located at address 0.
; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
; The name "__vector_table" has special meaning for C-SPY:
; it is where the SP start value is found, and the NVIC vector
; table register (VTOR) is initialized to this address if != 0.
;
; Cortex-M version
;
MODULE ?cstartup
;; Forward declaration of sections.
SECTION CSTACK:DATA:NOROOT(3)
SECTION .intvec:CODE:NOROOT(2)
EXTERN __iar_program_start
EXTERN SystemInit
PUBLIC __vector_table
DATA
__vector_table
DCD sfe(CSTACK)
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window Watchdog
DCD PVD_VDDIO2_IRQHandler ; PVD and VDDIO2 through EXTI Line detect
DCD RTC_IRQHandler ; RTC through EXTI Line
DCD FLASH_IRQHandler ; FLASH
DCD RCC_CRS_IRQHandler ; RCC and CRS
DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
DCD TSC_IRQHandler ; TS
DCD DMA1_Ch1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler ; DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2
DCD DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler ; DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5
DCD ADC1_COMP_IRQHandler ; ADC1, COMP1 and COMP2
DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC
DCD TIM7_IRQHandler ; TIM7
DCD TIM14_IRQHandler ; TIM14
DCD TIM15_IRQHandler ; TIM15
DCD TIM16_IRQHandler ; TIM16
DCD TIM17_IRQHandler ; TIM17
DCD I2C1_IRQHandler ; I2C1
DCD I2C2_IRQHandler ; I2C2
DCD SPI1_IRQHandler ; SPI1
DCD SPI2_IRQHandler ; SPI2
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD USART3_8_IRQHandler ; USART3, USART4, USART5, USART6, USART7, USART8
DCD CEC_CAN_IRQHandler ; CEC and CAN
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Default interrupt handlers.
;;
THUMB
PUBWEAK Reset_Handler
SECTION .text:CODE:NOROOT:REORDER(2)
Reset_Handler
LDR R0, =SystemInit
BLX R0
LDR R0, =__iar_program_start
BX R0
PUBWEAK NMI_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
NMI_Handler
B NMI_Handler
PUBWEAK HardFault_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
HardFault_Handler
B HardFault_Handler
PUBWEAK SVC_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
SVC_Handler
B SVC_Handler
PUBWEAK PendSV_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
PendSV_Handler
B PendSV_Handler
PUBWEAK SysTick_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
SysTick_Handler
B SysTick_Handler
PUBWEAK WWDG_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
WWDG_IRQHandler
B WWDG_IRQHandler
PUBWEAK PVD_VDDIO2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
PVD_VDDIO2_IRQHandler
B PVD_VDDIO2_IRQHandler
PUBWEAK RTC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
RTC_IRQHandler
B RTC_IRQHandler
PUBWEAK FLASH_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
FLASH_IRQHandler
B FLASH_IRQHandler
PUBWEAK RCC_CRS_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
RCC_CRS_IRQHandler
B RCC_CRS_IRQHandler
PUBWEAK EXTI0_1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI0_1_IRQHandler
B EXTI0_1_IRQHandler
PUBWEAK EXTI2_3_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI2_3_IRQHandler
B EXTI2_3_IRQHandler
PUBWEAK EXTI4_15_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI4_15_IRQHandler
B EXTI4_15_IRQHandler
PUBWEAK TSC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TSC_IRQHandler
B TSC_IRQHandler
PUBWEAK DMA1_Ch1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Ch1_IRQHandler
B DMA1_Ch1_IRQHandler
PUBWEAK DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
B DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
PUBWEAK DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
B DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
PUBWEAK ADC1_COMP_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
ADC1_COMP_IRQHandler
B ADC1_COMP_IRQHandler
PUBWEAK TIM1_BRK_UP_TRG_COM_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM1_BRK_UP_TRG_COM_IRQHandler
B TIM1_BRK_UP_TRG_COM_IRQHandler
PUBWEAK TIM1_CC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM1_CC_IRQHandler
B TIM1_CC_IRQHandler
PUBWEAK TIM2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM2_IRQHandler
B TIM2_IRQHandler
PUBWEAK TIM3_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM3_IRQHandler
B TIM3_IRQHandler
PUBWEAK TIM6_DAC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM6_DAC_IRQHandler
B TIM6_DAC_IRQHandler
PUBWEAK TIM7_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM7_IRQHandler
B TIM7_IRQHandler
PUBWEAK TIM14_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM14_IRQHandler
B TIM14_IRQHandler
PUBWEAK TIM15_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM15_IRQHandler
B TIM15_IRQHandler
PUBWEAK TIM16_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM16_IRQHandler
B TIM16_IRQHandler
PUBWEAK TIM17_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM17_IRQHandler
B TIM17_IRQHandler
PUBWEAK I2C1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
I2C1_IRQHandler
B I2C1_IRQHandler
PUBWEAK I2C2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
I2C2_IRQHandler
B I2C2_IRQHandler
PUBWEAK SPI1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
SPI1_IRQHandler
B SPI1_IRQHandler
PUBWEAK SPI2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
SPI2_IRQHandler
B SPI2_IRQHandler
PUBWEAK USART1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
USART1_IRQHandler
B USART1_IRQHandler
PUBWEAK USART2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
USART2_IRQHandler
B USART2_IRQHandler
PUBWEAK USART3_8_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
USART3_8_IRQHandler
B USART3_8_IRQHandler
PUBWEAK CEC_CAN_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
CEC_CAN_IRQHandler
B CEC_CAN_IRQHandler
END
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
|
aegean-odyssey/mpmd_marlin_1.1.x
| 11,305
|
STM32Cube-1.10.1/Projects/STM32F091RC-Nucleo/Examples/DAC/DAC_SimpleConversion/MDK-ARM/startup_stm32f091xc.s
|
;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
;* File Name : startup_stm32f091xc.s
;* Author : MCD Application Team
;* Description : STM32F091xc/STM32F098xc devices vector table for MDK-ARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == Reset_Handler
;* - Set the vector table entries with the exceptions ISR address
;* - Branches to __main in the C library (which eventually
;* calls main()).
;* After Reset the CortexM0 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;*******************************************************************************
;
;* Redistribution and use in source and binary forms, with or without modification,
;* are permitted provided that the following conditions are met:
;* 1. Redistributions of source code must retain the above copyright notice,
;* this list of conditions and the following disclaimer.
;* 2. Redistributions in binary form must reproduce the above copyright notice,
;* this list of conditions and the following disclaimer in the documentation
;* and/or other materials provided with the distribution.
;* 3. Neither the name of STMicroelectronics nor the names of its contributors
;* may be used to endorse or promote products derived from this software
;* without specific prior written permission.
;*
;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
;
;*******************************************************************************
; Amount of memory (in bytes) allocated for Stack
; Tailor this value to your application needs
; <h> Stack Configuration
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Stack_Size EQU 0x400;
AREA STACK, NOINIT, READWRITE, ALIGN=3
Stack_Mem SPACE Stack_Size
__initial_sp
; <h> Heap Configuration
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Heap_Size EQU 0x200;
AREA HEAP, NOINIT, READWRITE, ALIGN=3
__heap_base
Heap_Mem SPACE Heap_Size
__heap_limit
PRESERVE8
THUMB
; Vector Table Mapped to Address 0 at Reset
AREA RESET, DATA, READONLY
EXPORT __Vectors
EXPORT __Vectors_End
EXPORT __Vectors_Size
__Vectors DCD __initial_sp ; Top of Stack
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window Watchdog
DCD PVD_VDDIO2_IRQHandler ; PVD through EXTI Line detect
DCD RTC_IRQHandler ; RTC through EXTI Line
DCD FLASH_IRQHandler ; FLASH
DCD RCC_CRS_IRQHandler ; RCC and CRS
DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
DCD TSC_IRQHandler ; TS
DCD DMA1_Ch1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler ; DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2
DCD DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler ; DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5
DCD ADC1_COMP_IRQHandler ; ADC1, COMP1 and COMP2
DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC
DCD TIM7_IRQHandler ; TIM7
DCD TIM14_IRQHandler ; TIM14
DCD TIM15_IRQHandler ; TIM15
DCD TIM16_IRQHandler ; TIM16
DCD TIM17_IRQHandler ; TIM17
DCD I2C1_IRQHandler ; I2C1
DCD I2C2_IRQHandler ; I2C2
DCD SPI1_IRQHandler ; SPI1
DCD SPI2_IRQHandler ; SPI2
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD USART3_8_IRQHandler ; USART3, USART4, USART5, USART6, USART7, USART8
DCD CEC_CAN_IRQHandler ; CEC and CAN
__Vectors_End
__Vectors_Size EQU __Vectors_End - __Vectors
AREA |.text|, CODE, READONLY
; Reset handler routine
Reset_Handler PROC
EXPORT Reset_Handler [WEAK]
IMPORT __main
IMPORT SystemInit
LDR R0, =SystemInit
BLX R0
LDR R0, =__main
BX R0
ENDP
; Dummy Exception Handlers (infinite loops which can be modified)
NMI_Handler PROC
EXPORT NMI_Handler [WEAK]
B .
ENDP
HardFault_Handler\
PROC
EXPORT HardFault_Handler [WEAK]
B .
ENDP
SVC_Handler PROC
EXPORT SVC_Handler [WEAK]
B .
ENDP
PendSV_Handler PROC
EXPORT PendSV_Handler [WEAK]
B .
ENDP
SysTick_Handler PROC
EXPORT SysTick_Handler [WEAK]
B .
ENDP
Default_Handler PROC
EXPORT WWDG_IRQHandler [WEAK]
EXPORT PVD_VDDIO2_IRQHandler [WEAK]
EXPORT RTC_IRQHandler [WEAK]
EXPORT FLASH_IRQHandler [WEAK]
EXPORT RCC_CRS_IRQHandler [WEAK]
EXPORT EXTI0_1_IRQHandler [WEAK]
EXPORT EXTI2_3_IRQHandler [WEAK]
EXPORT EXTI4_15_IRQHandler [WEAK]
EXPORT TSC_IRQHandler [WEAK]
EXPORT DMA1_Ch1_IRQHandler [WEAK]
EXPORT DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler [WEAK]
EXPORT DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler [WEAK]
EXPORT ADC1_COMP_IRQHandler [WEAK]
EXPORT TIM1_BRK_UP_TRG_COM_IRQHandler [WEAK]
EXPORT TIM1_CC_IRQHandler [WEAK]
EXPORT TIM2_IRQHandler [WEAK]
EXPORT TIM3_IRQHandler [WEAK]
EXPORT TIM6_DAC_IRQHandler [WEAK]
EXPORT TIM7_IRQHandler [WEAK]
EXPORT TIM14_IRQHandler [WEAK]
EXPORT TIM15_IRQHandler [WEAK]
EXPORT TIM16_IRQHandler [WEAK]
EXPORT TIM17_IRQHandler [WEAK]
EXPORT I2C1_IRQHandler [WEAK]
EXPORT I2C2_IRQHandler [WEAK]
EXPORT SPI1_IRQHandler [WEAK]
EXPORT SPI2_IRQHandler [WEAK]
EXPORT USART1_IRQHandler [WEAK]
EXPORT USART2_IRQHandler [WEAK]
EXPORT USART3_8_IRQHandler [WEAK]
EXPORT CEC_CAN_IRQHandler [WEAK]
WWDG_IRQHandler
PVD_VDDIO2_IRQHandler
RTC_IRQHandler
FLASH_IRQHandler
RCC_CRS_IRQHandler
EXTI0_1_IRQHandler
EXTI2_3_IRQHandler
EXTI4_15_IRQHandler
TSC_IRQHandler
DMA1_Ch1_IRQHandler
DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
ADC1_COMP_IRQHandler
TIM1_BRK_UP_TRG_COM_IRQHandler
TIM1_CC_IRQHandler
TIM2_IRQHandler
TIM3_IRQHandler
TIM6_DAC_IRQHandler
TIM7_IRQHandler
TIM14_IRQHandler
TIM15_IRQHandler
TIM16_IRQHandler
TIM17_IRQHandler
I2C1_IRQHandler
I2C2_IRQHandler
SPI1_IRQHandler
SPI2_IRQHandler
USART1_IRQHandler
USART2_IRQHandler
USART3_8_IRQHandler
CEC_CAN_IRQHandler
B .
ENDP
ALIGN
;*******************************************************************************
; User Stack and Heap initialization
;*******************************************************************************
IF :DEF:__MICROLIB
EXPORT __initial_sp
EXPORT __heap_base
EXPORT __heap_limit
ELSE
IMPORT __use_two_region_memory
EXPORT __user_initial_stackheap
__user_initial_stackheap
LDR R0, = Heap_Mem
LDR R1, =(Stack_Mem + Stack_Size)
LDR R2, = (Heap_Mem + Heap_Size)
LDR R3, = Stack_Mem
BX LR
ALIGN
ENDIF
END
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
|
aegean-odyssey/mpmd_marlin_1.1.x
| 10,745
|
STM32Cube-1.10.1/Projects/STM32F091RC-Nucleo/Examples/DAC/DAC_SimpleConversion/SW4STM32/startup_stm32f091xc.s
|
/**
******************************************************************************
* @file startup_stm32f091xc.s
* @author MCD Application Team
* @brief STM32F091xC devices vector table for GCC toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M0 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
.syntax unified
.cpu cortex-m0
.fpu softvfp
.thumb
.global g_pfnVectors
.global Default_Handler
/* start address for the initialization values of the .data section.
defined in linker script */
.word _sidata
/* start address for the .data section. defined in linker script */
.word _sdata
/* end address for the .data section. defined in linker script */
.word _edata
/* start address for the .bss section. defined in linker script */
.word _sbss
/* end address for the .bss section. defined in linker script */
.word _ebss
.section .text.Reset_Handler
.weak Reset_Handler
.type Reset_Handler, %function
Reset_Handler:
ldr r0, =_estack
mov sp, r0 /* set stack pointer */
/* Copy the data segment initializers from flash to SRAM */
movs r1, #0
b LoopCopyDataInit
CopyDataInit:
ldr r3, =_sidata
ldr r3, [r3, r1]
str r3, [r0, r1]
adds r1, r1, #4
LoopCopyDataInit:
ldr r0, =_sdata
ldr r3, =_edata
adds r2, r0, r1
cmp r2, r3
bcc CopyDataInit
ldr r2, =_sbss
b LoopFillZerobss
/* Zero fill the bss segment. */
FillZerobss:
movs r3, #0
str r3, [r2]
adds r2, r2, #4
LoopFillZerobss:
ldr r3, = _ebss
cmp r2, r3
bcc FillZerobss
/* Call the clock system intitialization function.*/
bl SystemInit
/* Call static constructors */
bl __libc_init_array
/* Call the application's entry point.*/
bl main
LoopForever:
b LoopForever
.size Reset_Handler, .-Reset_Handler
/**
* @brief This is the code that gets called when the processor receives an
* unexpected interrupt. This simply enters an infinite loop, preserving
* the system state for examination by a debugger.
*
* @param None
* @retval : None
*/
.section .text.Default_Handler,"ax",%progbits
Default_Handler:
Infinite_Loop:
b Infinite_Loop
.size Default_Handler, .-Default_Handler
/******************************************************************************
*
* The minimal vector table for a Cortex M0. Note that the proper constructs
* must be placed on this to ensure that it ends up at physical address
* 0x0000.0000.
*
******************************************************************************/
.section .isr_vector,"a",%progbits
.type g_pfnVectors, %object
.size g_pfnVectors, .-g_pfnVectors
g_pfnVectors:
.word _estack
.word Reset_Handler
.word NMI_Handler
.word HardFault_Handler
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word SVC_Handler
.word 0
.word 0
.word PendSV_Handler
.word SysTick_Handler
.word WWDG_IRQHandler /* Window WatchDog */
.word PVD_VDDIO2_IRQHandler /* PVD and VDDIO2 through EXTI Line detect */
.word RTC_IRQHandler /* RTC through the EXTI line */
.word FLASH_IRQHandler /* FLASH */
.word RCC_CRS_IRQHandler /* RCC and CRS */
.word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */
.word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */
.word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */
.word TSC_IRQHandler /* TSC */
.word DMA1_Ch1_IRQHandler /* DMA1 Channel 1 */
.word DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler /* DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2 */
.word DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler /* DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5 */
.word ADC1_COMP_IRQHandler /* ADC1, COMP1 and COMP2 */
.word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */
.word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
.word TIM2_IRQHandler /* TIM2 */
.word TIM3_IRQHandler /* TIM3 */
.word TIM6_DAC_IRQHandler /* TIM6 and DAC */
.word TIM7_IRQHandler /* TIM7 */
.word TIM14_IRQHandler /* TIM14 */
.word TIM15_IRQHandler /* TIM15 */
.word TIM16_IRQHandler /* TIM16 */
.word TIM17_IRQHandler /* TIM17 */
.word I2C1_IRQHandler /* I2C1 */
.word I2C2_IRQHandler /* I2C2 */
.word SPI1_IRQHandler /* SPI1 */
.word SPI2_IRQHandler /* SPI2 */
.word USART1_IRQHandler /* USART1 */
.word USART2_IRQHandler /* USART2 */
.word USART3_8_IRQHandler /* USART3, USART4, USART5, USART6, USART7, USART8 */
.word CEC_CAN_IRQHandler /* CEC and CAN */
/*******************************************************************************
*
* Provide weak aliases for each Exception handler to the Default_Handler.
* As they are weak aliases, any function with the same name will override
* this definition.
*
*******************************************************************************/
.weak NMI_Handler
.thumb_set NMI_Handler,Default_Handler
.weak HardFault_Handler
.thumb_set HardFault_Handler,Default_Handler
.weak SVC_Handler
.thumb_set SVC_Handler,Default_Handler
.weak PendSV_Handler
.thumb_set PendSV_Handler,Default_Handler
.weak SysTick_Handler
.thumb_set SysTick_Handler,Default_Handler
.weak WWDG_IRQHandler
.thumb_set WWDG_IRQHandler,Default_Handler
.weak PVD_VDDIO2_IRQHandler
.thumb_set PVD_VDDIO2_IRQHandler,Default_Handler
.weak RTC_IRQHandler
.thumb_set RTC_IRQHandler,Default_Handler
.weak FLASH_IRQHandler
.thumb_set FLASH_IRQHandler,Default_Handler
.weak RCC_CRS_IRQHandler
.thumb_set RCC_CRS_IRQHandler,Default_Handler
.weak EXTI0_1_IRQHandler
.thumb_set EXTI0_1_IRQHandler,Default_Handler
.weak EXTI2_3_IRQHandler
.thumb_set EXTI2_3_IRQHandler,Default_Handler
.weak EXTI4_15_IRQHandler
.thumb_set EXTI4_15_IRQHandler,Default_Handler
.weak TSC_IRQHandler
.thumb_set TSC_IRQHandler,Default_Handler
.weak DMA1_Ch1_IRQHandler
.thumb_set DMA1_Ch1_IRQHandler,Default_Handler
.weak DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
.thumb_set DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler,Default_Handler
.weak DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
.thumb_set DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler,Default_Handler
.weak ADC1_COMP_IRQHandler
.thumb_set ADC1_COMP_IRQHandler,Default_Handler
.weak TIM1_BRK_UP_TRG_COM_IRQHandler
.thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
.weak TIM1_CC_IRQHandler
.thumb_set TIM1_CC_IRQHandler,Default_Handler
.weak TIM2_IRQHandler
.thumb_set TIM2_IRQHandler,Default_Handler
.weak TIM3_IRQHandler
.thumb_set TIM3_IRQHandler,Default_Handler
.weak TIM6_DAC_IRQHandler
.thumb_set TIM6_DAC_IRQHandler,Default_Handler
.weak TIM7_IRQHandler
.thumb_set TIM7_IRQHandler,Default_Handler
.weak TIM14_IRQHandler
.thumb_set TIM14_IRQHandler,Default_Handler
.weak TIM15_IRQHandler
.thumb_set TIM15_IRQHandler,Default_Handler
.weak TIM16_IRQHandler
.thumb_set TIM16_IRQHandler,Default_Handler
.weak TIM17_IRQHandler
.thumb_set TIM17_IRQHandler,Default_Handler
.weak I2C1_IRQHandler
.thumb_set I2C1_IRQHandler,Default_Handler
.weak I2C2_IRQHandler
.thumb_set I2C2_IRQHandler,Default_Handler
.weak SPI1_IRQHandler
.thumb_set SPI1_IRQHandler,Default_Handler
.weak SPI2_IRQHandler
.thumb_set SPI2_IRQHandler,Default_Handler
.weak USART1_IRQHandler
.thumb_set USART1_IRQHandler,Default_Handler
.weak USART2_IRQHandler
.thumb_set USART2_IRQHandler,Default_Handler
.weak USART3_8_IRQHandler
.thumb_set USART3_8_IRQHandler,Default_Handler
.weak CEC_CAN_IRQHandler
.thumb_set CEC_CAN_IRQHandler,Default_Handler
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
aegean-odyssey/mpmd_marlin_1.1.x
| 11,410
|
STM32Cube-1.10.1/Projects/STM32F091RC-Nucleo/Examples/DAC/DAC_SimpleConversion/EWARM/startup_stm32f091xc.s
|
;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
;* File Name : startup_stm32f091xc.s
;* Author : MCD Application Team
;* Description : STM32F091xc/STM32F098xc devices vector table for EWARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == __iar_program_start,
;* - Set the vector table entries with the exceptions ISR
;* address,
;* - Branches to main in the C library (which eventually
;* calls main()).
;* After Reset the Cortex-M0 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;*******************************************************************************
;*
;* Redistribution and use in source and binary forms, with or without modification,
;* are permitted provided that the following conditions are met:
;* 1. Redistributions of source code must retain the above copyright notice,
;* this list of conditions and the following disclaimer.
;* 2. Redistributions in binary form must reproduce the above copyright notice,
;* this list of conditions and the following disclaimer in the documentation
;* and/or other materials provided with the distribution.
;* 3. Neither the name of STMicroelectronics nor the names of its contributors
;* may be used to endorse or promote products derived from this software
;* without specific prior written permission.
;*
;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
;*
;*******************************************************************************
;
;
; The modules in this file are included in the libraries, and may be replaced
; by any user-defined modules that define the PUBLIC symbol _program_start or
; a user defined start symbol.
; To override the cstartup defined in the library, simply add your modified
; version to the workbench project.
;
; The vector table is normally located at address 0.
; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
; The name "__vector_table" has special meaning for C-SPY:
; it is where the SP start value is found, and the NVIC vector
; table register (VTOR) is initialized to this address if != 0.
;
; Cortex-M version
;
MODULE ?cstartup
;; Forward declaration of sections.
SECTION CSTACK:DATA:NOROOT(3)
SECTION .intvec:CODE:NOROOT(2)
EXTERN __iar_program_start
EXTERN SystemInit
PUBLIC __vector_table
DATA
__vector_table
DCD sfe(CSTACK)
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window Watchdog
DCD PVD_VDDIO2_IRQHandler ; PVD and VDDIO2 through EXTI Line detect
DCD RTC_IRQHandler ; RTC through EXTI Line
DCD FLASH_IRQHandler ; FLASH
DCD RCC_CRS_IRQHandler ; RCC and CRS
DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
DCD TSC_IRQHandler ; TS
DCD DMA1_Ch1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler ; DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2
DCD DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler ; DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5
DCD ADC1_COMP_IRQHandler ; ADC1, COMP1 and COMP2
DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC
DCD TIM7_IRQHandler ; TIM7
DCD TIM14_IRQHandler ; TIM14
DCD TIM15_IRQHandler ; TIM15
DCD TIM16_IRQHandler ; TIM16
DCD TIM17_IRQHandler ; TIM17
DCD I2C1_IRQHandler ; I2C1
DCD I2C2_IRQHandler ; I2C2
DCD SPI1_IRQHandler ; SPI1
DCD SPI2_IRQHandler ; SPI2
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD USART3_8_IRQHandler ; USART3, USART4, USART5, USART6, USART7, USART8
DCD CEC_CAN_IRQHandler ; CEC and CAN
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Default interrupt handlers.
;;
THUMB
PUBWEAK Reset_Handler
SECTION .text:CODE:NOROOT:REORDER(2)
Reset_Handler
LDR R0, =SystemInit
BLX R0
LDR R0, =__iar_program_start
BX R0
PUBWEAK NMI_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
NMI_Handler
B NMI_Handler
PUBWEAK HardFault_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
HardFault_Handler
B HardFault_Handler
PUBWEAK SVC_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
SVC_Handler
B SVC_Handler
PUBWEAK PendSV_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
PendSV_Handler
B PendSV_Handler
PUBWEAK SysTick_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
SysTick_Handler
B SysTick_Handler
PUBWEAK WWDG_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
WWDG_IRQHandler
B WWDG_IRQHandler
PUBWEAK PVD_VDDIO2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
PVD_VDDIO2_IRQHandler
B PVD_VDDIO2_IRQHandler
PUBWEAK RTC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
RTC_IRQHandler
B RTC_IRQHandler
PUBWEAK FLASH_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
FLASH_IRQHandler
B FLASH_IRQHandler
PUBWEAK RCC_CRS_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
RCC_CRS_IRQHandler
B RCC_CRS_IRQHandler
PUBWEAK EXTI0_1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI0_1_IRQHandler
B EXTI0_1_IRQHandler
PUBWEAK EXTI2_3_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI2_3_IRQHandler
B EXTI2_3_IRQHandler
PUBWEAK EXTI4_15_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI4_15_IRQHandler
B EXTI4_15_IRQHandler
PUBWEAK TSC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TSC_IRQHandler
B TSC_IRQHandler
PUBWEAK DMA1_Ch1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Ch1_IRQHandler
B DMA1_Ch1_IRQHandler
PUBWEAK DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
B DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
PUBWEAK DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
B DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
PUBWEAK ADC1_COMP_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
ADC1_COMP_IRQHandler
B ADC1_COMP_IRQHandler
PUBWEAK TIM1_BRK_UP_TRG_COM_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM1_BRK_UP_TRG_COM_IRQHandler
B TIM1_BRK_UP_TRG_COM_IRQHandler
PUBWEAK TIM1_CC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM1_CC_IRQHandler
B TIM1_CC_IRQHandler
PUBWEAK TIM2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM2_IRQHandler
B TIM2_IRQHandler
PUBWEAK TIM3_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM3_IRQHandler
B TIM3_IRQHandler
PUBWEAK TIM6_DAC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM6_DAC_IRQHandler
B TIM6_DAC_IRQHandler
PUBWEAK TIM7_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM7_IRQHandler
B TIM7_IRQHandler
PUBWEAK TIM14_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM14_IRQHandler
B TIM14_IRQHandler
PUBWEAK TIM15_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM15_IRQHandler
B TIM15_IRQHandler
PUBWEAK TIM16_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM16_IRQHandler
B TIM16_IRQHandler
PUBWEAK TIM17_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM17_IRQHandler
B TIM17_IRQHandler
PUBWEAK I2C1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
I2C1_IRQHandler
B I2C1_IRQHandler
PUBWEAK I2C2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
I2C2_IRQHandler
B I2C2_IRQHandler
PUBWEAK SPI1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
SPI1_IRQHandler
B SPI1_IRQHandler
PUBWEAK SPI2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
SPI2_IRQHandler
B SPI2_IRQHandler
PUBWEAK USART1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
USART1_IRQHandler
B USART1_IRQHandler
PUBWEAK USART2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
USART2_IRQHandler
B USART2_IRQHandler
PUBWEAK USART3_8_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
USART3_8_IRQHandler
B USART3_8_IRQHandler
PUBWEAK CEC_CAN_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
CEC_CAN_IRQHandler
B CEC_CAN_IRQHandler
END
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
|
aegean-odyssey/mpmd_marlin_1.1.x
| 11,305
|
STM32Cube-1.10.1/Projects/STM32F091RC-Nucleo/Examples/DAC/DAC_SignalsGeneration/MDK-ARM/startup_stm32f091xc.s
|
;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
;* File Name : startup_stm32f091xc.s
;* Author : MCD Application Team
;* Description : STM32F091xc/STM32F098xc devices vector table for MDK-ARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == Reset_Handler
;* - Set the vector table entries with the exceptions ISR address
;* - Branches to __main in the C library (which eventually
;* calls main()).
;* After Reset the CortexM0 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;*******************************************************************************
;
;* Redistribution and use in source and binary forms, with or without modification,
;* are permitted provided that the following conditions are met:
;* 1. Redistributions of source code must retain the above copyright notice,
;* this list of conditions and the following disclaimer.
;* 2. Redistributions in binary form must reproduce the above copyright notice,
;* this list of conditions and the following disclaimer in the documentation
;* and/or other materials provided with the distribution.
;* 3. Neither the name of STMicroelectronics nor the names of its contributors
;* may be used to endorse or promote products derived from this software
;* without specific prior written permission.
;*
;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
;
;*******************************************************************************
; Amount of memory (in bytes) allocated for Stack
; Tailor this value to your application needs
; <h> Stack Configuration
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Stack_Size EQU 0x400;
AREA STACK, NOINIT, READWRITE, ALIGN=3
Stack_Mem SPACE Stack_Size
__initial_sp
; <h> Heap Configuration
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Heap_Size EQU 0x200;
AREA HEAP, NOINIT, READWRITE, ALIGN=3
__heap_base
Heap_Mem SPACE Heap_Size
__heap_limit
PRESERVE8
THUMB
; Vector Table Mapped to Address 0 at Reset
AREA RESET, DATA, READONLY
EXPORT __Vectors
EXPORT __Vectors_End
EXPORT __Vectors_Size
__Vectors DCD __initial_sp ; Top of Stack
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window Watchdog
DCD PVD_VDDIO2_IRQHandler ; PVD through EXTI Line detect
DCD RTC_IRQHandler ; RTC through EXTI Line
DCD FLASH_IRQHandler ; FLASH
DCD RCC_CRS_IRQHandler ; RCC and CRS
DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
DCD TSC_IRQHandler ; TS
DCD DMA1_Ch1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler ; DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2
DCD DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler ; DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5
DCD ADC1_COMP_IRQHandler ; ADC1, COMP1 and COMP2
DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC
DCD TIM7_IRQHandler ; TIM7
DCD TIM14_IRQHandler ; TIM14
DCD TIM15_IRQHandler ; TIM15
DCD TIM16_IRQHandler ; TIM16
DCD TIM17_IRQHandler ; TIM17
DCD I2C1_IRQHandler ; I2C1
DCD I2C2_IRQHandler ; I2C2
DCD SPI1_IRQHandler ; SPI1
DCD SPI2_IRQHandler ; SPI2
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD USART3_8_IRQHandler ; USART3, USART4, USART5, USART6, USART7, USART8
DCD CEC_CAN_IRQHandler ; CEC and CAN
__Vectors_End
__Vectors_Size EQU __Vectors_End - __Vectors
AREA |.text|, CODE, READONLY
; Reset handler routine
Reset_Handler PROC
EXPORT Reset_Handler [WEAK]
IMPORT __main
IMPORT SystemInit
LDR R0, =SystemInit
BLX R0
LDR R0, =__main
BX R0
ENDP
; Dummy Exception Handlers (infinite loops which can be modified)
NMI_Handler PROC
EXPORT NMI_Handler [WEAK]
B .
ENDP
HardFault_Handler\
PROC
EXPORT HardFault_Handler [WEAK]
B .
ENDP
SVC_Handler PROC
EXPORT SVC_Handler [WEAK]
B .
ENDP
PendSV_Handler PROC
EXPORT PendSV_Handler [WEAK]
B .
ENDP
SysTick_Handler PROC
EXPORT SysTick_Handler [WEAK]
B .
ENDP
Default_Handler PROC
EXPORT WWDG_IRQHandler [WEAK]
EXPORT PVD_VDDIO2_IRQHandler [WEAK]
EXPORT RTC_IRQHandler [WEAK]
EXPORT FLASH_IRQHandler [WEAK]
EXPORT RCC_CRS_IRQHandler [WEAK]
EXPORT EXTI0_1_IRQHandler [WEAK]
EXPORT EXTI2_3_IRQHandler [WEAK]
EXPORT EXTI4_15_IRQHandler [WEAK]
EXPORT TSC_IRQHandler [WEAK]
EXPORT DMA1_Ch1_IRQHandler [WEAK]
EXPORT DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler [WEAK]
EXPORT DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler [WEAK]
EXPORT ADC1_COMP_IRQHandler [WEAK]
EXPORT TIM1_BRK_UP_TRG_COM_IRQHandler [WEAK]
EXPORT TIM1_CC_IRQHandler [WEAK]
EXPORT TIM2_IRQHandler [WEAK]
EXPORT TIM3_IRQHandler [WEAK]
EXPORT TIM6_DAC_IRQHandler [WEAK]
EXPORT TIM7_IRQHandler [WEAK]
EXPORT TIM14_IRQHandler [WEAK]
EXPORT TIM15_IRQHandler [WEAK]
EXPORT TIM16_IRQHandler [WEAK]
EXPORT TIM17_IRQHandler [WEAK]
EXPORT I2C1_IRQHandler [WEAK]
EXPORT I2C2_IRQHandler [WEAK]
EXPORT SPI1_IRQHandler [WEAK]
EXPORT SPI2_IRQHandler [WEAK]
EXPORT USART1_IRQHandler [WEAK]
EXPORT USART2_IRQHandler [WEAK]
EXPORT USART3_8_IRQHandler [WEAK]
EXPORT CEC_CAN_IRQHandler [WEAK]
WWDG_IRQHandler
PVD_VDDIO2_IRQHandler
RTC_IRQHandler
FLASH_IRQHandler
RCC_CRS_IRQHandler
EXTI0_1_IRQHandler
EXTI2_3_IRQHandler
EXTI4_15_IRQHandler
TSC_IRQHandler
DMA1_Ch1_IRQHandler
DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
ADC1_COMP_IRQHandler
TIM1_BRK_UP_TRG_COM_IRQHandler
TIM1_CC_IRQHandler
TIM2_IRQHandler
TIM3_IRQHandler
TIM6_DAC_IRQHandler
TIM7_IRQHandler
TIM14_IRQHandler
TIM15_IRQHandler
TIM16_IRQHandler
TIM17_IRQHandler
I2C1_IRQHandler
I2C2_IRQHandler
SPI1_IRQHandler
SPI2_IRQHandler
USART1_IRQHandler
USART2_IRQHandler
USART3_8_IRQHandler
CEC_CAN_IRQHandler
B .
ENDP
ALIGN
;*******************************************************************************
; User Stack and Heap initialization
;*******************************************************************************
IF :DEF:__MICROLIB
EXPORT __initial_sp
EXPORT __heap_base
EXPORT __heap_limit
ELSE
IMPORT __use_two_region_memory
EXPORT __user_initial_stackheap
__user_initial_stackheap
LDR R0, = Heap_Mem
LDR R1, =(Stack_Mem + Stack_Size)
LDR R2, = (Heap_Mem + Heap_Size)
LDR R3, = Stack_Mem
BX LR
ALIGN
ENDIF
END
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
|
aegean-odyssey/mpmd_marlin_1.1.x
| 10,745
|
STM32Cube-1.10.1/Projects/STM32F091RC-Nucleo/Examples/DAC/DAC_SignalsGeneration/SW4STM32/startup_stm32f091xc.s
|
/**
******************************************************************************
* @file startup_stm32f091xc.s
* @author MCD Application Team
* @brief STM32F091xC devices vector table for GCC toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M0 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
.syntax unified
.cpu cortex-m0
.fpu softvfp
.thumb
.global g_pfnVectors
.global Default_Handler
/* start address for the initialization values of the .data section.
defined in linker script */
.word _sidata
/* start address for the .data section. defined in linker script */
.word _sdata
/* end address for the .data section. defined in linker script */
.word _edata
/* start address for the .bss section. defined in linker script */
.word _sbss
/* end address for the .bss section. defined in linker script */
.word _ebss
.section .text.Reset_Handler
.weak Reset_Handler
.type Reset_Handler, %function
Reset_Handler:
ldr r0, =_estack
mov sp, r0 /* set stack pointer */
/* Copy the data segment initializers from flash to SRAM */
movs r1, #0
b LoopCopyDataInit
CopyDataInit:
ldr r3, =_sidata
ldr r3, [r3, r1]
str r3, [r0, r1]
adds r1, r1, #4
LoopCopyDataInit:
ldr r0, =_sdata
ldr r3, =_edata
adds r2, r0, r1
cmp r2, r3
bcc CopyDataInit
ldr r2, =_sbss
b LoopFillZerobss
/* Zero fill the bss segment. */
FillZerobss:
movs r3, #0
str r3, [r2]
adds r2, r2, #4
LoopFillZerobss:
ldr r3, = _ebss
cmp r2, r3
bcc FillZerobss
/* Call the clock system intitialization function.*/
bl SystemInit
/* Call static constructors */
bl __libc_init_array
/* Call the application's entry point.*/
bl main
LoopForever:
b LoopForever
.size Reset_Handler, .-Reset_Handler
/**
* @brief This is the code that gets called when the processor receives an
* unexpected interrupt. This simply enters an infinite loop, preserving
* the system state for examination by a debugger.
*
* @param None
* @retval : None
*/
.section .text.Default_Handler,"ax",%progbits
Default_Handler:
Infinite_Loop:
b Infinite_Loop
.size Default_Handler, .-Default_Handler
/******************************************************************************
*
* The minimal vector table for a Cortex M0. Note that the proper constructs
* must be placed on this to ensure that it ends up at physical address
* 0x0000.0000.
*
******************************************************************************/
.section .isr_vector,"a",%progbits
.type g_pfnVectors, %object
.size g_pfnVectors, .-g_pfnVectors
g_pfnVectors:
.word _estack
.word Reset_Handler
.word NMI_Handler
.word HardFault_Handler
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word SVC_Handler
.word 0
.word 0
.word PendSV_Handler
.word SysTick_Handler
.word WWDG_IRQHandler /* Window WatchDog */
.word PVD_VDDIO2_IRQHandler /* PVD and VDDIO2 through EXTI Line detect */
.word RTC_IRQHandler /* RTC through the EXTI line */
.word FLASH_IRQHandler /* FLASH */
.word RCC_CRS_IRQHandler /* RCC and CRS */
.word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */
.word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */
.word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */
.word TSC_IRQHandler /* TSC */
.word DMA1_Ch1_IRQHandler /* DMA1 Channel 1 */
.word DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler /* DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2 */
.word DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler /* DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5 */
.word ADC1_COMP_IRQHandler /* ADC1, COMP1 and COMP2 */
.word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */
.word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
.word TIM2_IRQHandler /* TIM2 */
.word TIM3_IRQHandler /* TIM3 */
.word TIM6_DAC_IRQHandler /* TIM6 and DAC */
.word TIM7_IRQHandler /* TIM7 */
.word TIM14_IRQHandler /* TIM14 */
.word TIM15_IRQHandler /* TIM15 */
.word TIM16_IRQHandler /* TIM16 */
.word TIM17_IRQHandler /* TIM17 */
.word I2C1_IRQHandler /* I2C1 */
.word I2C2_IRQHandler /* I2C2 */
.word SPI1_IRQHandler /* SPI1 */
.word SPI2_IRQHandler /* SPI2 */
.word USART1_IRQHandler /* USART1 */
.word USART2_IRQHandler /* USART2 */
.word USART3_8_IRQHandler /* USART3, USART4, USART5, USART6, USART7, USART8 */
.word CEC_CAN_IRQHandler /* CEC and CAN */
/*******************************************************************************
*
* Provide weak aliases for each Exception handler to the Default_Handler.
* As they are weak aliases, any function with the same name will override
* this definition.
*
*******************************************************************************/
.weak NMI_Handler
.thumb_set NMI_Handler,Default_Handler
.weak HardFault_Handler
.thumb_set HardFault_Handler,Default_Handler
.weak SVC_Handler
.thumb_set SVC_Handler,Default_Handler
.weak PendSV_Handler
.thumb_set PendSV_Handler,Default_Handler
.weak SysTick_Handler
.thumb_set SysTick_Handler,Default_Handler
.weak WWDG_IRQHandler
.thumb_set WWDG_IRQHandler,Default_Handler
.weak PVD_VDDIO2_IRQHandler
.thumb_set PVD_VDDIO2_IRQHandler,Default_Handler
.weak RTC_IRQHandler
.thumb_set RTC_IRQHandler,Default_Handler
.weak FLASH_IRQHandler
.thumb_set FLASH_IRQHandler,Default_Handler
.weak RCC_CRS_IRQHandler
.thumb_set RCC_CRS_IRQHandler,Default_Handler
.weak EXTI0_1_IRQHandler
.thumb_set EXTI0_1_IRQHandler,Default_Handler
.weak EXTI2_3_IRQHandler
.thumb_set EXTI2_3_IRQHandler,Default_Handler
.weak EXTI4_15_IRQHandler
.thumb_set EXTI4_15_IRQHandler,Default_Handler
.weak TSC_IRQHandler
.thumb_set TSC_IRQHandler,Default_Handler
.weak DMA1_Ch1_IRQHandler
.thumb_set DMA1_Ch1_IRQHandler,Default_Handler
.weak DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
.thumb_set DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler,Default_Handler
.weak DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
.thumb_set DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler,Default_Handler
.weak ADC1_COMP_IRQHandler
.thumb_set ADC1_COMP_IRQHandler,Default_Handler
.weak TIM1_BRK_UP_TRG_COM_IRQHandler
.thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
.weak TIM1_CC_IRQHandler
.thumb_set TIM1_CC_IRQHandler,Default_Handler
.weak TIM2_IRQHandler
.thumb_set TIM2_IRQHandler,Default_Handler
.weak TIM3_IRQHandler
.thumb_set TIM3_IRQHandler,Default_Handler
.weak TIM6_DAC_IRQHandler
.thumb_set TIM6_DAC_IRQHandler,Default_Handler
.weak TIM7_IRQHandler
.thumb_set TIM7_IRQHandler,Default_Handler
.weak TIM14_IRQHandler
.thumb_set TIM14_IRQHandler,Default_Handler
.weak TIM15_IRQHandler
.thumb_set TIM15_IRQHandler,Default_Handler
.weak TIM16_IRQHandler
.thumb_set TIM16_IRQHandler,Default_Handler
.weak TIM17_IRQHandler
.thumb_set TIM17_IRQHandler,Default_Handler
.weak I2C1_IRQHandler
.thumb_set I2C1_IRQHandler,Default_Handler
.weak I2C2_IRQHandler
.thumb_set I2C2_IRQHandler,Default_Handler
.weak SPI1_IRQHandler
.thumb_set SPI1_IRQHandler,Default_Handler
.weak SPI2_IRQHandler
.thumb_set SPI2_IRQHandler,Default_Handler
.weak USART1_IRQHandler
.thumb_set USART1_IRQHandler,Default_Handler
.weak USART2_IRQHandler
.thumb_set USART2_IRQHandler,Default_Handler
.weak USART3_8_IRQHandler
.thumb_set USART3_8_IRQHandler,Default_Handler
.weak CEC_CAN_IRQHandler
.thumb_set CEC_CAN_IRQHandler,Default_Handler
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
aegean-odyssey/mpmd_marlin_1.1.x
| 11,410
|
STM32Cube-1.10.1/Projects/STM32F091RC-Nucleo/Examples/DAC/DAC_SignalsGeneration/EWARM/startup_stm32f091xc.s
|
;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
;* File Name : startup_stm32f091xc.s
;* Author : MCD Application Team
;* Description : STM32F091xc/STM32F098xc devices vector table for EWARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == __iar_program_start,
;* - Set the vector table entries with the exceptions ISR
;* address,
;* - Branches to main in the C library (which eventually
;* calls main()).
;* After Reset the Cortex-M0 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;*******************************************************************************
;*
;* Redistribution and use in source and binary forms, with or without modification,
;* are permitted provided that the following conditions are met:
;* 1. Redistributions of source code must retain the above copyright notice,
;* this list of conditions and the following disclaimer.
;* 2. Redistributions in binary form must reproduce the above copyright notice,
;* this list of conditions and the following disclaimer in the documentation
;* and/or other materials provided with the distribution.
;* 3. Neither the name of STMicroelectronics nor the names of its contributors
;* may be used to endorse or promote products derived from this software
;* without specific prior written permission.
;*
;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
;*
;*******************************************************************************
;
;
; The modules in this file are included in the libraries, and may be replaced
; by any user-defined modules that define the PUBLIC symbol _program_start or
; a user defined start symbol.
; To override the cstartup defined in the library, simply add your modified
; version to the workbench project.
;
; The vector table is normally located at address 0.
; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
; The name "__vector_table" has special meaning for C-SPY:
; it is where the SP start value is found, and the NVIC vector
; table register (VTOR) is initialized to this address if != 0.
;
; Cortex-M version
;
MODULE ?cstartup
;; Forward declaration of sections.
SECTION CSTACK:DATA:NOROOT(3)
SECTION .intvec:CODE:NOROOT(2)
EXTERN __iar_program_start
EXTERN SystemInit
PUBLIC __vector_table
DATA
__vector_table
DCD sfe(CSTACK)
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window Watchdog
DCD PVD_VDDIO2_IRQHandler ; PVD and VDDIO2 through EXTI Line detect
DCD RTC_IRQHandler ; RTC through EXTI Line
DCD FLASH_IRQHandler ; FLASH
DCD RCC_CRS_IRQHandler ; RCC and CRS
DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
DCD TSC_IRQHandler ; TS
DCD DMA1_Ch1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler ; DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2
DCD DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler ; DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5
DCD ADC1_COMP_IRQHandler ; ADC1, COMP1 and COMP2
DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC
DCD TIM7_IRQHandler ; TIM7
DCD TIM14_IRQHandler ; TIM14
DCD TIM15_IRQHandler ; TIM15
DCD TIM16_IRQHandler ; TIM16
DCD TIM17_IRQHandler ; TIM17
DCD I2C1_IRQHandler ; I2C1
DCD I2C2_IRQHandler ; I2C2
DCD SPI1_IRQHandler ; SPI1
DCD SPI2_IRQHandler ; SPI2
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD USART3_8_IRQHandler ; USART3, USART4, USART5, USART6, USART7, USART8
DCD CEC_CAN_IRQHandler ; CEC and CAN
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Default interrupt handlers.
;;
THUMB
PUBWEAK Reset_Handler
SECTION .text:CODE:NOROOT:REORDER(2)
Reset_Handler
LDR R0, =SystemInit
BLX R0
LDR R0, =__iar_program_start
BX R0
PUBWEAK NMI_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
NMI_Handler
B NMI_Handler
PUBWEAK HardFault_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
HardFault_Handler
B HardFault_Handler
PUBWEAK SVC_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
SVC_Handler
B SVC_Handler
PUBWEAK PendSV_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
PendSV_Handler
B PendSV_Handler
PUBWEAK SysTick_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
SysTick_Handler
B SysTick_Handler
PUBWEAK WWDG_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
WWDG_IRQHandler
B WWDG_IRQHandler
PUBWEAK PVD_VDDIO2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
PVD_VDDIO2_IRQHandler
B PVD_VDDIO2_IRQHandler
PUBWEAK RTC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
RTC_IRQHandler
B RTC_IRQHandler
PUBWEAK FLASH_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
FLASH_IRQHandler
B FLASH_IRQHandler
PUBWEAK RCC_CRS_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
RCC_CRS_IRQHandler
B RCC_CRS_IRQHandler
PUBWEAK EXTI0_1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI0_1_IRQHandler
B EXTI0_1_IRQHandler
PUBWEAK EXTI2_3_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI2_3_IRQHandler
B EXTI2_3_IRQHandler
PUBWEAK EXTI4_15_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI4_15_IRQHandler
B EXTI4_15_IRQHandler
PUBWEAK TSC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TSC_IRQHandler
B TSC_IRQHandler
PUBWEAK DMA1_Ch1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Ch1_IRQHandler
B DMA1_Ch1_IRQHandler
PUBWEAK DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
B DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
PUBWEAK DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
B DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
PUBWEAK ADC1_COMP_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
ADC1_COMP_IRQHandler
B ADC1_COMP_IRQHandler
PUBWEAK TIM1_BRK_UP_TRG_COM_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM1_BRK_UP_TRG_COM_IRQHandler
B TIM1_BRK_UP_TRG_COM_IRQHandler
PUBWEAK TIM1_CC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM1_CC_IRQHandler
B TIM1_CC_IRQHandler
PUBWEAK TIM2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM2_IRQHandler
B TIM2_IRQHandler
PUBWEAK TIM3_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM3_IRQHandler
B TIM3_IRQHandler
PUBWEAK TIM6_DAC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM6_DAC_IRQHandler
B TIM6_DAC_IRQHandler
PUBWEAK TIM7_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM7_IRQHandler
B TIM7_IRQHandler
PUBWEAK TIM14_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM14_IRQHandler
B TIM14_IRQHandler
PUBWEAK TIM15_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM15_IRQHandler
B TIM15_IRQHandler
PUBWEAK TIM16_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM16_IRQHandler
B TIM16_IRQHandler
PUBWEAK TIM17_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM17_IRQHandler
B TIM17_IRQHandler
PUBWEAK I2C1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
I2C1_IRQHandler
B I2C1_IRQHandler
PUBWEAK I2C2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
I2C2_IRQHandler
B I2C2_IRQHandler
PUBWEAK SPI1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
SPI1_IRQHandler
B SPI1_IRQHandler
PUBWEAK SPI2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
SPI2_IRQHandler
B SPI2_IRQHandler
PUBWEAK USART1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
USART1_IRQHandler
B USART1_IRQHandler
PUBWEAK USART2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
USART2_IRQHandler
B USART2_IRQHandler
PUBWEAK USART3_8_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
USART3_8_IRQHandler
B USART3_8_IRQHandler
PUBWEAK CEC_CAN_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
CEC_CAN_IRQHandler
B CEC_CAN_IRQHandler
END
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
|
aegean-odyssey/mpmd_marlin_1.1.x
| 11,305
|
STM32Cube-1.10.1/Projects/STM32F091RC-Nucleo/Examples/RTC/RTC_Tamper/MDK-ARM/startup_stm32f091xc.s
|
;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
;* File Name : startup_stm32f091xc.s
;* Author : MCD Application Team
;* Description : STM32F091xc/STM32F098xc devices vector table for MDK-ARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == Reset_Handler
;* - Set the vector table entries with the exceptions ISR address
;* - Branches to __main in the C library (which eventually
;* calls main()).
;* After Reset the CortexM0 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;*******************************************************************************
;
;* Redistribution and use in source and binary forms, with or without modification,
;* are permitted provided that the following conditions are met:
;* 1. Redistributions of source code must retain the above copyright notice,
;* this list of conditions and the following disclaimer.
;* 2. Redistributions in binary form must reproduce the above copyright notice,
;* this list of conditions and the following disclaimer in the documentation
;* and/or other materials provided with the distribution.
;* 3. Neither the name of STMicroelectronics nor the names of its contributors
;* may be used to endorse or promote products derived from this software
;* without specific prior written permission.
;*
;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
;
;*******************************************************************************
; Amount of memory (in bytes) allocated for Stack
; Tailor this value to your application needs
; <h> Stack Configuration
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Stack_Size EQU 0x400;
AREA STACK, NOINIT, READWRITE, ALIGN=3
Stack_Mem SPACE Stack_Size
__initial_sp
; <h> Heap Configuration
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Heap_Size EQU 0x200;
AREA HEAP, NOINIT, READWRITE, ALIGN=3
__heap_base
Heap_Mem SPACE Heap_Size
__heap_limit
PRESERVE8
THUMB
; Vector Table Mapped to Address 0 at Reset
AREA RESET, DATA, READONLY
EXPORT __Vectors
EXPORT __Vectors_End
EXPORT __Vectors_Size
__Vectors DCD __initial_sp ; Top of Stack
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window Watchdog
DCD PVD_VDDIO2_IRQHandler ; PVD through EXTI Line detect
DCD RTC_IRQHandler ; RTC through EXTI Line
DCD FLASH_IRQHandler ; FLASH
DCD RCC_CRS_IRQHandler ; RCC and CRS
DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
DCD TSC_IRQHandler ; TS
DCD DMA1_Ch1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler ; DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2
DCD DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler ; DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5
DCD ADC1_COMP_IRQHandler ; ADC1, COMP1 and COMP2
DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC
DCD TIM7_IRQHandler ; TIM7
DCD TIM14_IRQHandler ; TIM14
DCD TIM15_IRQHandler ; TIM15
DCD TIM16_IRQHandler ; TIM16
DCD TIM17_IRQHandler ; TIM17
DCD I2C1_IRQHandler ; I2C1
DCD I2C2_IRQHandler ; I2C2
DCD SPI1_IRQHandler ; SPI1
DCD SPI2_IRQHandler ; SPI2
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD USART3_8_IRQHandler ; USART3, USART4, USART5, USART6, USART7, USART8
DCD CEC_CAN_IRQHandler ; CEC and CAN
__Vectors_End
__Vectors_Size EQU __Vectors_End - __Vectors
AREA |.text|, CODE, READONLY
; Reset handler routine
Reset_Handler PROC
EXPORT Reset_Handler [WEAK]
IMPORT __main
IMPORT SystemInit
LDR R0, =SystemInit
BLX R0
LDR R0, =__main
BX R0
ENDP
; Dummy Exception Handlers (infinite loops which can be modified)
NMI_Handler PROC
EXPORT NMI_Handler [WEAK]
B .
ENDP
HardFault_Handler\
PROC
EXPORT HardFault_Handler [WEAK]
B .
ENDP
SVC_Handler PROC
EXPORT SVC_Handler [WEAK]
B .
ENDP
PendSV_Handler PROC
EXPORT PendSV_Handler [WEAK]
B .
ENDP
SysTick_Handler PROC
EXPORT SysTick_Handler [WEAK]
B .
ENDP
Default_Handler PROC
EXPORT WWDG_IRQHandler [WEAK]
EXPORT PVD_VDDIO2_IRQHandler [WEAK]
EXPORT RTC_IRQHandler [WEAK]
EXPORT FLASH_IRQHandler [WEAK]
EXPORT RCC_CRS_IRQHandler [WEAK]
EXPORT EXTI0_1_IRQHandler [WEAK]
EXPORT EXTI2_3_IRQHandler [WEAK]
EXPORT EXTI4_15_IRQHandler [WEAK]
EXPORT TSC_IRQHandler [WEAK]
EXPORT DMA1_Ch1_IRQHandler [WEAK]
EXPORT DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler [WEAK]
EXPORT DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler [WEAK]
EXPORT ADC1_COMP_IRQHandler [WEAK]
EXPORT TIM1_BRK_UP_TRG_COM_IRQHandler [WEAK]
EXPORT TIM1_CC_IRQHandler [WEAK]
EXPORT TIM2_IRQHandler [WEAK]
EXPORT TIM3_IRQHandler [WEAK]
EXPORT TIM6_DAC_IRQHandler [WEAK]
EXPORT TIM7_IRQHandler [WEAK]
EXPORT TIM14_IRQHandler [WEAK]
EXPORT TIM15_IRQHandler [WEAK]
EXPORT TIM16_IRQHandler [WEAK]
EXPORT TIM17_IRQHandler [WEAK]
EXPORT I2C1_IRQHandler [WEAK]
EXPORT I2C2_IRQHandler [WEAK]
EXPORT SPI1_IRQHandler [WEAK]
EXPORT SPI2_IRQHandler [WEAK]
EXPORT USART1_IRQHandler [WEAK]
EXPORT USART2_IRQHandler [WEAK]
EXPORT USART3_8_IRQHandler [WEAK]
EXPORT CEC_CAN_IRQHandler [WEAK]
WWDG_IRQHandler
PVD_VDDIO2_IRQHandler
RTC_IRQHandler
FLASH_IRQHandler
RCC_CRS_IRQHandler
EXTI0_1_IRQHandler
EXTI2_3_IRQHandler
EXTI4_15_IRQHandler
TSC_IRQHandler
DMA1_Ch1_IRQHandler
DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
ADC1_COMP_IRQHandler
TIM1_BRK_UP_TRG_COM_IRQHandler
TIM1_CC_IRQHandler
TIM2_IRQHandler
TIM3_IRQHandler
TIM6_DAC_IRQHandler
TIM7_IRQHandler
TIM14_IRQHandler
TIM15_IRQHandler
TIM16_IRQHandler
TIM17_IRQHandler
I2C1_IRQHandler
I2C2_IRQHandler
SPI1_IRQHandler
SPI2_IRQHandler
USART1_IRQHandler
USART2_IRQHandler
USART3_8_IRQHandler
CEC_CAN_IRQHandler
B .
ENDP
ALIGN
;*******************************************************************************
; User Stack and Heap initialization
;*******************************************************************************
IF :DEF:__MICROLIB
EXPORT __initial_sp
EXPORT __heap_base
EXPORT __heap_limit
ELSE
IMPORT __use_two_region_memory
EXPORT __user_initial_stackheap
__user_initial_stackheap
LDR R0, = Heap_Mem
LDR R1, =(Stack_Mem + Stack_Size)
LDR R2, = (Heap_Mem + Heap_Size)
LDR R3, = Stack_Mem
BX LR
ALIGN
ENDIF
END
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
|
aegean-odyssey/mpmd_marlin_1.1.x
| 10,745
|
STM32Cube-1.10.1/Projects/STM32F091RC-Nucleo/Examples/RTC/RTC_Tamper/SW4STM32/startup_stm32f091xc.s
|
/**
******************************************************************************
* @file startup_stm32f091xc.s
* @author MCD Application Team
* @brief STM32F091xC devices vector table for GCC toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M0 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
.syntax unified
.cpu cortex-m0
.fpu softvfp
.thumb
.global g_pfnVectors
.global Default_Handler
/* start address for the initialization values of the .data section.
defined in linker script */
.word _sidata
/* start address for the .data section. defined in linker script */
.word _sdata
/* end address for the .data section. defined in linker script */
.word _edata
/* start address for the .bss section. defined in linker script */
.word _sbss
/* end address for the .bss section. defined in linker script */
.word _ebss
.section .text.Reset_Handler
.weak Reset_Handler
.type Reset_Handler, %function
Reset_Handler:
ldr r0, =_estack
mov sp, r0 /* set stack pointer */
/* Copy the data segment initializers from flash to SRAM */
movs r1, #0
b LoopCopyDataInit
CopyDataInit:
ldr r3, =_sidata
ldr r3, [r3, r1]
str r3, [r0, r1]
adds r1, r1, #4
LoopCopyDataInit:
ldr r0, =_sdata
ldr r3, =_edata
adds r2, r0, r1
cmp r2, r3
bcc CopyDataInit
ldr r2, =_sbss
b LoopFillZerobss
/* Zero fill the bss segment. */
FillZerobss:
movs r3, #0
str r3, [r2]
adds r2, r2, #4
LoopFillZerobss:
ldr r3, = _ebss
cmp r2, r3
bcc FillZerobss
/* Call the clock system intitialization function.*/
bl SystemInit
/* Call static constructors */
bl __libc_init_array
/* Call the application's entry point.*/
bl main
LoopForever:
b LoopForever
.size Reset_Handler, .-Reset_Handler
/**
* @brief This is the code that gets called when the processor receives an
* unexpected interrupt. This simply enters an infinite loop, preserving
* the system state for examination by a debugger.
*
* @param None
* @retval : None
*/
.section .text.Default_Handler,"ax",%progbits
Default_Handler:
Infinite_Loop:
b Infinite_Loop
.size Default_Handler, .-Default_Handler
/******************************************************************************
*
* The minimal vector table for a Cortex M0. Note that the proper constructs
* must be placed on this to ensure that it ends up at physical address
* 0x0000.0000.
*
******************************************************************************/
.section .isr_vector,"a",%progbits
.type g_pfnVectors, %object
.size g_pfnVectors, .-g_pfnVectors
g_pfnVectors:
.word _estack
.word Reset_Handler
.word NMI_Handler
.word HardFault_Handler
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word SVC_Handler
.word 0
.word 0
.word PendSV_Handler
.word SysTick_Handler
.word WWDG_IRQHandler /* Window WatchDog */
.word PVD_VDDIO2_IRQHandler /* PVD and VDDIO2 through EXTI Line detect */
.word RTC_IRQHandler /* RTC through the EXTI line */
.word FLASH_IRQHandler /* FLASH */
.word RCC_CRS_IRQHandler /* RCC and CRS */
.word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */
.word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */
.word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */
.word TSC_IRQHandler /* TSC */
.word DMA1_Ch1_IRQHandler /* DMA1 Channel 1 */
.word DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler /* DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2 */
.word DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler /* DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5 */
.word ADC1_COMP_IRQHandler /* ADC1, COMP1 and COMP2 */
.word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */
.word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
.word TIM2_IRQHandler /* TIM2 */
.word TIM3_IRQHandler /* TIM3 */
.word TIM6_DAC_IRQHandler /* TIM6 and DAC */
.word TIM7_IRQHandler /* TIM7 */
.word TIM14_IRQHandler /* TIM14 */
.word TIM15_IRQHandler /* TIM15 */
.word TIM16_IRQHandler /* TIM16 */
.word TIM17_IRQHandler /* TIM17 */
.word I2C1_IRQHandler /* I2C1 */
.word I2C2_IRQHandler /* I2C2 */
.word SPI1_IRQHandler /* SPI1 */
.word SPI2_IRQHandler /* SPI2 */
.word USART1_IRQHandler /* USART1 */
.word USART2_IRQHandler /* USART2 */
.word USART3_8_IRQHandler /* USART3, USART4, USART5, USART6, USART7, USART8 */
.word CEC_CAN_IRQHandler /* CEC and CAN */
/*******************************************************************************
*
* Provide weak aliases for each Exception handler to the Default_Handler.
* As they are weak aliases, any function with the same name will override
* this definition.
*
*******************************************************************************/
.weak NMI_Handler
.thumb_set NMI_Handler,Default_Handler
.weak HardFault_Handler
.thumb_set HardFault_Handler,Default_Handler
.weak SVC_Handler
.thumb_set SVC_Handler,Default_Handler
.weak PendSV_Handler
.thumb_set PendSV_Handler,Default_Handler
.weak SysTick_Handler
.thumb_set SysTick_Handler,Default_Handler
.weak WWDG_IRQHandler
.thumb_set WWDG_IRQHandler,Default_Handler
.weak PVD_VDDIO2_IRQHandler
.thumb_set PVD_VDDIO2_IRQHandler,Default_Handler
.weak RTC_IRQHandler
.thumb_set RTC_IRQHandler,Default_Handler
.weak FLASH_IRQHandler
.thumb_set FLASH_IRQHandler,Default_Handler
.weak RCC_CRS_IRQHandler
.thumb_set RCC_CRS_IRQHandler,Default_Handler
.weak EXTI0_1_IRQHandler
.thumb_set EXTI0_1_IRQHandler,Default_Handler
.weak EXTI2_3_IRQHandler
.thumb_set EXTI2_3_IRQHandler,Default_Handler
.weak EXTI4_15_IRQHandler
.thumb_set EXTI4_15_IRQHandler,Default_Handler
.weak TSC_IRQHandler
.thumb_set TSC_IRQHandler,Default_Handler
.weak DMA1_Ch1_IRQHandler
.thumb_set DMA1_Ch1_IRQHandler,Default_Handler
.weak DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
.thumb_set DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler,Default_Handler
.weak DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
.thumb_set DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler,Default_Handler
.weak ADC1_COMP_IRQHandler
.thumb_set ADC1_COMP_IRQHandler,Default_Handler
.weak TIM1_BRK_UP_TRG_COM_IRQHandler
.thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
.weak TIM1_CC_IRQHandler
.thumb_set TIM1_CC_IRQHandler,Default_Handler
.weak TIM2_IRQHandler
.thumb_set TIM2_IRQHandler,Default_Handler
.weak TIM3_IRQHandler
.thumb_set TIM3_IRQHandler,Default_Handler
.weak TIM6_DAC_IRQHandler
.thumb_set TIM6_DAC_IRQHandler,Default_Handler
.weak TIM7_IRQHandler
.thumb_set TIM7_IRQHandler,Default_Handler
.weak TIM14_IRQHandler
.thumb_set TIM14_IRQHandler,Default_Handler
.weak TIM15_IRQHandler
.thumb_set TIM15_IRQHandler,Default_Handler
.weak TIM16_IRQHandler
.thumb_set TIM16_IRQHandler,Default_Handler
.weak TIM17_IRQHandler
.thumb_set TIM17_IRQHandler,Default_Handler
.weak I2C1_IRQHandler
.thumb_set I2C1_IRQHandler,Default_Handler
.weak I2C2_IRQHandler
.thumb_set I2C2_IRQHandler,Default_Handler
.weak SPI1_IRQHandler
.thumb_set SPI1_IRQHandler,Default_Handler
.weak SPI2_IRQHandler
.thumb_set SPI2_IRQHandler,Default_Handler
.weak USART1_IRQHandler
.thumb_set USART1_IRQHandler,Default_Handler
.weak USART2_IRQHandler
.thumb_set USART2_IRQHandler,Default_Handler
.weak USART3_8_IRQHandler
.thumb_set USART3_8_IRQHandler,Default_Handler
.weak CEC_CAN_IRQHandler
.thumb_set CEC_CAN_IRQHandler,Default_Handler
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
aegean-odyssey/mpmd_marlin_1.1.x
| 11,410
|
STM32Cube-1.10.1/Projects/STM32F091RC-Nucleo/Examples/RTC/RTC_Tamper/EWARM/startup_stm32f091xc.s
|
;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
;* File Name : startup_stm32f091xc.s
;* Author : MCD Application Team
;* Description : STM32F091xc/STM32F098xc devices vector table for EWARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == __iar_program_start,
;* - Set the vector table entries with the exceptions ISR
;* address,
;* - Branches to main in the C library (which eventually
;* calls main()).
;* After Reset the Cortex-M0 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;*******************************************************************************
;*
;* Redistribution and use in source and binary forms, with or without modification,
;* are permitted provided that the following conditions are met:
;* 1. Redistributions of source code must retain the above copyright notice,
;* this list of conditions and the following disclaimer.
;* 2. Redistributions in binary form must reproduce the above copyright notice,
;* this list of conditions and the following disclaimer in the documentation
;* and/or other materials provided with the distribution.
;* 3. Neither the name of STMicroelectronics nor the names of its contributors
;* may be used to endorse or promote products derived from this software
;* without specific prior written permission.
;*
;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
;*
;*******************************************************************************
;
;
; The modules in this file are included in the libraries, and may be replaced
; by any user-defined modules that define the PUBLIC symbol _program_start or
; a user defined start symbol.
; To override the cstartup defined in the library, simply add your modified
; version to the workbench project.
;
; The vector table is normally located at address 0.
; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
; The name "__vector_table" has special meaning for C-SPY:
; it is where the SP start value is found, and the NVIC vector
; table register (VTOR) is initialized to this address if != 0.
;
; Cortex-M version
;
MODULE ?cstartup
;; Forward declaration of sections.
SECTION CSTACK:DATA:NOROOT(3)
SECTION .intvec:CODE:NOROOT(2)
EXTERN __iar_program_start
EXTERN SystemInit
PUBLIC __vector_table
DATA
__vector_table
DCD sfe(CSTACK)
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window Watchdog
DCD PVD_VDDIO2_IRQHandler ; PVD and VDDIO2 through EXTI Line detect
DCD RTC_IRQHandler ; RTC through EXTI Line
DCD FLASH_IRQHandler ; FLASH
DCD RCC_CRS_IRQHandler ; RCC and CRS
DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
DCD TSC_IRQHandler ; TS
DCD DMA1_Ch1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler ; DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2
DCD DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler ; DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5
DCD ADC1_COMP_IRQHandler ; ADC1, COMP1 and COMP2
DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC
DCD TIM7_IRQHandler ; TIM7
DCD TIM14_IRQHandler ; TIM14
DCD TIM15_IRQHandler ; TIM15
DCD TIM16_IRQHandler ; TIM16
DCD TIM17_IRQHandler ; TIM17
DCD I2C1_IRQHandler ; I2C1
DCD I2C2_IRQHandler ; I2C2
DCD SPI1_IRQHandler ; SPI1
DCD SPI2_IRQHandler ; SPI2
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD USART3_8_IRQHandler ; USART3, USART4, USART5, USART6, USART7, USART8
DCD CEC_CAN_IRQHandler ; CEC and CAN
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Default interrupt handlers.
;;
THUMB
PUBWEAK Reset_Handler
SECTION .text:CODE:NOROOT:REORDER(2)
Reset_Handler
LDR R0, =SystemInit
BLX R0
LDR R0, =__iar_program_start
BX R0
PUBWEAK NMI_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
NMI_Handler
B NMI_Handler
PUBWEAK HardFault_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
HardFault_Handler
B HardFault_Handler
PUBWEAK SVC_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
SVC_Handler
B SVC_Handler
PUBWEAK PendSV_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
PendSV_Handler
B PendSV_Handler
PUBWEAK SysTick_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
SysTick_Handler
B SysTick_Handler
PUBWEAK WWDG_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
WWDG_IRQHandler
B WWDG_IRQHandler
PUBWEAK PVD_VDDIO2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
PVD_VDDIO2_IRQHandler
B PVD_VDDIO2_IRQHandler
PUBWEAK RTC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
RTC_IRQHandler
B RTC_IRQHandler
PUBWEAK FLASH_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
FLASH_IRQHandler
B FLASH_IRQHandler
PUBWEAK RCC_CRS_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
RCC_CRS_IRQHandler
B RCC_CRS_IRQHandler
PUBWEAK EXTI0_1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI0_1_IRQHandler
B EXTI0_1_IRQHandler
PUBWEAK EXTI2_3_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI2_3_IRQHandler
B EXTI2_3_IRQHandler
PUBWEAK EXTI4_15_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI4_15_IRQHandler
B EXTI4_15_IRQHandler
PUBWEAK TSC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TSC_IRQHandler
B TSC_IRQHandler
PUBWEAK DMA1_Ch1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Ch1_IRQHandler
B DMA1_Ch1_IRQHandler
PUBWEAK DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
B DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
PUBWEAK DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
B DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
PUBWEAK ADC1_COMP_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
ADC1_COMP_IRQHandler
B ADC1_COMP_IRQHandler
PUBWEAK TIM1_BRK_UP_TRG_COM_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM1_BRK_UP_TRG_COM_IRQHandler
B TIM1_BRK_UP_TRG_COM_IRQHandler
PUBWEAK TIM1_CC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM1_CC_IRQHandler
B TIM1_CC_IRQHandler
PUBWEAK TIM2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM2_IRQHandler
B TIM2_IRQHandler
PUBWEAK TIM3_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM3_IRQHandler
B TIM3_IRQHandler
PUBWEAK TIM6_DAC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM6_DAC_IRQHandler
B TIM6_DAC_IRQHandler
PUBWEAK TIM7_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM7_IRQHandler
B TIM7_IRQHandler
PUBWEAK TIM14_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM14_IRQHandler
B TIM14_IRQHandler
PUBWEAK TIM15_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM15_IRQHandler
B TIM15_IRQHandler
PUBWEAK TIM16_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM16_IRQHandler
B TIM16_IRQHandler
PUBWEAK TIM17_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM17_IRQHandler
B TIM17_IRQHandler
PUBWEAK I2C1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
I2C1_IRQHandler
B I2C1_IRQHandler
PUBWEAK I2C2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
I2C2_IRQHandler
B I2C2_IRQHandler
PUBWEAK SPI1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
SPI1_IRQHandler
B SPI1_IRQHandler
PUBWEAK SPI2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
SPI2_IRQHandler
B SPI2_IRQHandler
PUBWEAK USART1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
USART1_IRQHandler
B USART1_IRQHandler
PUBWEAK USART2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
USART2_IRQHandler
B USART2_IRQHandler
PUBWEAK USART3_8_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
USART3_8_IRQHandler
B USART3_8_IRQHandler
PUBWEAK CEC_CAN_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
CEC_CAN_IRQHandler
B CEC_CAN_IRQHandler
END
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
|
aegean-odyssey/mpmd_marlin_1.1.x
| 11,305
|
STM32Cube-1.10.1/Projects/STM32F091RC-Nucleo/Examples/RTC/RTC_Alarm/MDK-ARM/startup_stm32f091xc.s
|
;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
;* File Name : startup_stm32f091xc.s
;* Author : MCD Application Team
;* Description : STM32F091xc/STM32F098xc devices vector table for MDK-ARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == Reset_Handler
;* - Set the vector table entries with the exceptions ISR address
;* - Branches to __main in the C library (which eventually
;* calls main()).
;* After Reset the CortexM0 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;*******************************************************************************
;
;* Redistribution and use in source and binary forms, with or without modification,
;* are permitted provided that the following conditions are met:
;* 1. Redistributions of source code must retain the above copyright notice,
;* this list of conditions and the following disclaimer.
;* 2. Redistributions in binary form must reproduce the above copyright notice,
;* this list of conditions and the following disclaimer in the documentation
;* and/or other materials provided with the distribution.
;* 3. Neither the name of STMicroelectronics nor the names of its contributors
;* may be used to endorse or promote products derived from this software
;* without specific prior written permission.
;*
;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
;
;*******************************************************************************
; Amount of memory (in bytes) allocated for Stack
; Tailor this value to your application needs
; <h> Stack Configuration
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Stack_Size EQU 0x400;
AREA STACK, NOINIT, READWRITE, ALIGN=3
Stack_Mem SPACE Stack_Size
__initial_sp
; <h> Heap Configuration
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Heap_Size EQU 0x200;
AREA HEAP, NOINIT, READWRITE, ALIGN=3
__heap_base
Heap_Mem SPACE Heap_Size
__heap_limit
PRESERVE8
THUMB
; Vector Table Mapped to Address 0 at Reset
AREA RESET, DATA, READONLY
EXPORT __Vectors
EXPORT __Vectors_End
EXPORT __Vectors_Size
__Vectors DCD __initial_sp ; Top of Stack
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window Watchdog
DCD PVD_VDDIO2_IRQHandler ; PVD through EXTI Line detect
DCD RTC_IRQHandler ; RTC through EXTI Line
DCD FLASH_IRQHandler ; FLASH
DCD RCC_CRS_IRQHandler ; RCC and CRS
DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
DCD TSC_IRQHandler ; TS
DCD DMA1_Ch1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler ; DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2
DCD DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler ; DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5
DCD ADC1_COMP_IRQHandler ; ADC1, COMP1 and COMP2
DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC
DCD TIM7_IRQHandler ; TIM7
DCD TIM14_IRQHandler ; TIM14
DCD TIM15_IRQHandler ; TIM15
DCD TIM16_IRQHandler ; TIM16
DCD TIM17_IRQHandler ; TIM17
DCD I2C1_IRQHandler ; I2C1
DCD I2C2_IRQHandler ; I2C2
DCD SPI1_IRQHandler ; SPI1
DCD SPI2_IRQHandler ; SPI2
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD USART3_8_IRQHandler ; USART3, USART4, USART5, USART6, USART7, USART8
DCD CEC_CAN_IRQHandler ; CEC and CAN
__Vectors_End
__Vectors_Size EQU __Vectors_End - __Vectors
AREA |.text|, CODE, READONLY
; Reset handler routine
Reset_Handler PROC
EXPORT Reset_Handler [WEAK]
IMPORT __main
IMPORT SystemInit
LDR R0, =SystemInit
BLX R0
LDR R0, =__main
BX R0
ENDP
; Dummy Exception Handlers (infinite loops which can be modified)
NMI_Handler PROC
EXPORT NMI_Handler [WEAK]
B .
ENDP
HardFault_Handler\
PROC
EXPORT HardFault_Handler [WEAK]
B .
ENDP
SVC_Handler PROC
EXPORT SVC_Handler [WEAK]
B .
ENDP
PendSV_Handler PROC
EXPORT PendSV_Handler [WEAK]
B .
ENDP
SysTick_Handler PROC
EXPORT SysTick_Handler [WEAK]
B .
ENDP
Default_Handler PROC
EXPORT WWDG_IRQHandler [WEAK]
EXPORT PVD_VDDIO2_IRQHandler [WEAK]
EXPORT RTC_IRQHandler [WEAK]
EXPORT FLASH_IRQHandler [WEAK]
EXPORT RCC_CRS_IRQHandler [WEAK]
EXPORT EXTI0_1_IRQHandler [WEAK]
EXPORT EXTI2_3_IRQHandler [WEAK]
EXPORT EXTI4_15_IRQHandler [WEAK]
EXPORT TSC_IRQHandler [WEAK]
EXPORT DMA1_Ch1_IRQHandler [WEAK]
EXPORT DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler [WEAK]
EXPORT DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler [WEAK]
EXPORT ADC1_COMP_IRQHandler [WEAK]
EXPORT TIM1_BRK_UP_TRG_COM_IRQHandler [WEAK]
EXPORT TIM1_CC_IRQHandler [WEAK]
EXPORT TIM2_IRQHandler [WEAK]
EXPORT TIM3_IRQHandler [WEAK]
EXPORT TIM6_DAC_IRQHandler [WEAK]
EXPORT TIM7_IRQHandler [WEAK]
EXPORT TIM14_IRQHandler [WEAK]
EXPORT TIM15_IRQHandler [WEAK]
EXPORT TIM16_IRQHandler [WEAK]
EXPORT TIM17_IRQHandler [WEAK]
EXPORT I2C1_IRQHandler [WEAK]
EXPORT I2C2_IRQHandler [WEAK]
EXPORT SPI1_IRQHandler [WEAK]
EXPORT SPI2_IRQHandler [WEAK]
EXPORT USART1_IRQHandler [WEAK]
EXPORT USART2_IRQHandler [WEAK]
EXPORT USART3_8_IRQHandler [WEAK]
EXPORT CEC_CAN_IRQHandler [WEAK]
WWDG_IRQHandler
PVD_VDDIO2_IRQHandler
RTC_IRQHandler
FLASH_IRQHandler
RCC_CRS_IRQHandler
EXTI0_1_IRQHandler
EXTI2_3_IRQHandler
EXTI4_15_IRQHandler
TSC_IRQHandler
DMA1_Ch1_IRQHandler
DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
ADC1_COMP_IRQHandler
TIM1_BRK_UP_TRG_COM_IRQHandler
TIM1_CC_IRQHandler
TIM2_IRQHandler
TIM3_IRQHandler
TIM6_DAC_IRQHandler
TIM7_IRQHandler
TIM14_IRQHandler
TIM15_IRQHandler
TIM16_IRQHandler
TIM17_IRQHandler
I2C1_IRQHandler
I2C2_IRQHandler
SPI1_IRQHandler
SPI2_IRQHandler
USART1_IRQHandler
USART2_IRQHandler
USART3_8_IRQHandler
CEC_CAN_IRQHandler
B .
ENDP
ALIGN
;*******************************************************************************
; User Stack and Heap initialization
;*******************************************************************************
IF :DEF:__MICROLIB
EXPORT __initial_sp
EXPORT __heap_base
EXPORT __heap_limit
ELSE
IMPORT __use_two_region_memory
EXPORT __user_initial_stackheap
__user_initial_stackheap
LDR R0, = Heap_Mem
LDR R1, =(Stack_Mem + Stack_Size)
LDR R2, = (Heap_Mem + Heap_Size)
LDR R3, = Stack_Mem
BX LR
ALIGN
ENDIF
END
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
|
aegean-odyssey/mpmd_marlin_1.1.x
| 10,745
|
STM32Cube-1.10.1/Projects/STM32F091RC-Nucleo/Examples/RTC/RTC_Alarm/SW4STM32/startup_stm32f091xc.s
|
/**
******************************************************************************
* @file startup_stm32f091xc.s
* @author MCD Application Team
* @brief STM32F091xC devices vector table for GCC toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M0 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
.syntax unified
.cpu cortex-m0
.fpu softvfp
.thumb
.global g_pfnVectors
.global Default_Handler
/* start address for the initialization values of the .data section.
defined in linker script */
.word _sidata
/* start address for the .data section. defined in linker script */
.word _sdata
/* end address for the .data section. defined in linker script */
.word _edata
/* start address for the .bss section. defined in linker script */
.word _sbss
/* end address for the .bss section. defined in linker script */
.word _ebss
.section .text.Reset_Handler
.weak Reset_Handler
.type Reset_Handler, %function
Reset_Handler:
ldr r0, =_estack
mov sp, r0 /* set stack pointer */
/* Copy the data segment initializers from flash to SRAM */
movs r1, #0
b LoopCopyDataInit
CopyDataInit:
ldr r3, =_sidata
ldr r3, [r3, r1]
str r3, [r0, r1]
adds r1, r1, #4
LoopCopyDataInit:
ldr r0, =_sdata
ldr r3, =_edata
adds r2, r0, r1
cmp r2, r3
bcc CopyDataInit
ldr r2, =_sbss
b LoopFillZerobss
/* Zero fill the bss segment. */
FillZerobss:
movs r3, #0
str r3, [r2]
adds r2, r2, #4
LoopFillZerobss:
ldr r3, = _ebss
cmp r2, r3
bcc FillZerobss
/* Call the clock system intitialization function.*/
bl SystemInit
/* Call static constructors */
bl __libc_init_array
/* Call the application's entry point.*/
bl main
LoopForever:
b LoopForever
.size Reset_Handler, .-Reset_Handler
/**
* @brief This is the code that gets called when the processor receives an
* unexpected interrupt. This simply enters an infinite loop, preserving
* the system state for examination by a debugger.
*
* @param None
* @retval : None
*/
.section .text.Default_Handler,"ax",%progbits
Default_Handler:
Infinite_Loop:
b Infinite_Loop
.size Default_Handler, .-Default_Handler
/******************************************************************************
*
* The minimal vector table for a Cortex M0. Note that the proper constructs
* must be placed on this to ensure that it ends up at physical address
* 0x0000.0000.
*
******************************************************************************/
.section .isr_vector,"a",%progbits
.type g_pfnVectors, %object
.size g_pfnVectors, .-g_pfnVectors
g_pfnVectors:
.word _estack
.word Reset_Handler
.word NMI_Handler
.word HardFault_Handler
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word SVC_Handler
.word 0
.word 0
.word PendSV_Handler
.word SysTick_Handler
.word WWDG_IRQHandler /* Window WatchDog */
.word PVD_VDDIO2_IRQHandler /* PVD and VDDIO2 through EXTI Line detect */
.word RTC_IRQHandler /* RTC through the EXTI line */
.word FLASH_IRQHandler /* FLASH */
.word RCC_CRS_IRQHandler /* RCC and CRS */
.word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */
.word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */
.word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */
.word TSC_IRQHandler /* TSC */
.word DMA1_Ch1_IRQHandler /* DMA1 Channel 1 */
.word DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler /* DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2 */
.word DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler /* DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5 */
.word ADC1_COMP_IRQHandler /* ADC1, COMP1 and COMP2 */
.word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */
.word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
.word TIM2_IRQHandler /* TIM2 */
.word TIM3_IRQHandler /* TIM3 */
.word TIM6_DAC_IRQHandler /* TIM6 and DAC */
.word TIM7_IRQHandler /* TIM7 */
.word TIM14_IRQHandler /* TIM14 */
.word TIM15_IRQHandler /* TIM15 */
.word TIM16_IRQHandler /* TIM16 */
.word TIM17_IRQHandler /* TIM17 */
.word I2C1_IRQHandler /* I2C1 */
.word I2C2_IRQHandler /* I2C2 */
.word SPI1_IRQHandler /* SPI1 */
.word SPI2_IRQHandler /* SPI2 */
.word USART1_IRQHandler /* USART1 */
.word USART2_IRQHandler /* USART2 */
.word USART3_8_IRQHandler /* USART3, USART4, USART5, USART6, USART7, USART8 */
.word CEC_CAN_IRQHandler /* CEC and CAN */
/*******************************************************************************
*
* Provide weak aliases for each Exception handler to the Default_Handler.
* As they are weak aliases, any function with the same name will override
* this definition.
*
*******************************************************************************/
.weak NMI_Handler
.thumb_set NMI_Handler,Default_Handler
.weak HardFault_Handler
.thumb_set HardFault_Handler,Default_Handler
.weak SVC_Handler
.thumb_set SVC_Handler,Default_Handler
.weak PendSV_Handler
.thumb_set PendSV_Handler,Default_Handler
.weak SysTick_Handler
.thumb_set SysTick_Handler,Default_Handler
.weak WWDG_IRQHandler
.thumb_set WWDG_IRQHandler,Default_Handler
.weak PVD_VDDIO2_IRQHandler
.thumb_set PVD_VDDIO2_IRQHandler,Default_Handler
.weak RTC_IRQHandler
.thumb_set RTC_IRQHandler,Default_Handler
.weak FLASH_IRQHandler
.thumb_set FLASH_IRQHandler,Default_Handler
.weak RCC_CRS_IRQHandler
.thumb_set RCC_CRS_IRQHandler,Default_Handler
.weak EXTI0_1_IRQHandler
.thumb_set EXTI0_1_IRQHandler,Default_Handler
.weak EXTI2_3_IRQHandler
.thumb_set EXTI2_3_IRQHandler,Default_Handler
.weak EXTI4_15_IRQHandler
.thumb_set EXTI4_15_IRQHandler,Default_Handler
.weak TSC_IRQHandler
.thumb_set TSC_IRQHandler,Default_Handler
.weak DMA1_Ch1_IRQHandler
.thumb_set DMA1_Ch1_IRQHandler,Default_Handler
.weak DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
.thumb_set DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler,Default_Handler
.weak DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
.thumb_set DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler,Default_Handler
.weak ADC1_COMP_IRQHandler
.thumb_set ADC1_COMP_IRQHandler,Default_Handler
.weak TIM1_BRK_UP_TRG_COM_IRQHandler
.thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
.weak TIM1_CC_IRQHandler
.thumb_set TIM1_CC_IRQHandler,Default_Handler
.weak TIM2_IRQHandler
.thumb_set TIM2_IRQHandler,Default_Handler
.weak TIM3_IRQHandler
.thumb_set TIM3_IRQHandler,Default_Handler
.weak TIM6_DAC_IRQHandler
.thumb_set TIM6_DAC_IRQHandler,Default_Handler
.weak TIM7_IRQHandler
.thumb_set TIM7_IRQHandler,Default_Handler
.weak TIM14_IRQHandler
.thumb_set TIM14_IRQHandler,Default_Handler
.weak TIM15_IRQHandler
.thumb_set TIM15_IRQHandler,Default_Handler
.weak TIM16_IRQHandler
.thumb_set TIM16_IRQHandler,Default_Handler
.weak TIM17_IRQHandler
.thumb_set TIM17_IRQHandler,Default_Handler
.weak I2C1_IRQHandler
.thumb_set I2C1_IRQHandler,Default_Handler
.weak I2C2_IRQHandler
.thumb_set I2C2_IRQHandler,Default_Handler
.weak SPI1_IRQHandler
.thumb_set SPI1_IRQHandler,Default_Handler
.weak SPI2_IRQHandler
.thumb_set SPI2_IRQHandler,Default_Handler
.weak USART1_IRQHandler
.thumb_set USART1_IRQHandler,Default_Handler
.weak USART2_IRQHandler
.thumb_set USART2_IRQHandler,Default_Handler
.weak USART3_8_IRQHandler
.thumb_set USART3_8_IRQHandler,Default_Handler
.weak CEC_CAN_IRQHandler
.thumb_set CEC_CAN_IRQHandler,Default_Handler
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
aegean-odyssey/mpmd_marlin_1.1.x
| 11,410
|
STM32Cube-1.10.1/Projects/STM32F091RC-Nucleo/Examples/RTC/RTC_Alarm/EWARM/startup_stm32f091xc.s
|
;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
;* File Name : startup_stm32f091xc.s
;* Author : MCD Application Team
;* Description : STM32F091xc/STM32F098xc devices vector table for EWARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == __iar_program_start,
;* - Set the vector table entries with the exceptions ISR
;* address,
;* - Branches to main in the C library (which eventually
;* calls main()).
;* After Reset the Cortex-M0 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;*******************************************************************************
;*
;* Redistribution and use in source and binary forms, with or without modification,
;* are permitted provided that the following conditions are met:
;* 1. Redistributions of source code must retain the above copyright notice,
;* this list of conditions and the following disclaimer.
;* 2. Redistributions in binary form must reproduce the above copyright notice,
;* this list of conditions and the following disclaimer in the documentation
;* and/or other materials provided with the distribution.
;* 3. Neither the name of STMicroelectronics nor the names of its contributors
;* may be used to endorse or promote products derived from this software
;* without specific prior written permission.
;*
;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
;*
;*******************************************************************************
;
;
; The modules in this file are included in the libraries, and may be replaced
; by any user-defined modules that define the PUBLIC symbol _program_start or
; a user defined start symbol.
; To override the cstartup defined in the library, simply add your modified
; version to the workbench project.
;
; The vector table is normally located at address 0.
; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
; The name "__vector_table" has special meaning for C-SPY:
; it is where the SP start value is found, and the NVIC vector
; table register (VTOR) is initialized to this address if != 0.
;
; Cortex-M version
;
MODULE ?cstartup
;; Forward declaration of sections.
SECTION CSTACK:DATA:NOROOT(3)
SECTION .intvec:CODE:NOROOT(2)
EXTERN __iar_program_start
EXTERN SystemInit
PUBLIC __vector_table
DATA
__vector_table
DCD sfe(CSTACK)
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window Watchdog
DCD PVD_VDDIO2_IRQHandler ; PVD and VDDIO2 through EXTI Line detect
DCD RTC_IRQHandler ; RTC through EXTI Line
DCD FLASH_IRQHandler ; FLASH
DCD RCC_CRS_IRQHandler ; RCC and CRS
DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
DCD TSC_IRQHandler ; TS
DCD DMA1_Ch1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler ; DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2
DCD DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler ; DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5
DCD ADC1_COMP_IRQHandler ; ADC1, COMP1 and COMP2
DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC
DCD TIM7_IRQHandler ; TIM7
DCD TIM14_IRQHandler ; TIM14
DCD TIM15_IRQHandler ; TIM15
DCD TIM16_IRQHandler ; TIM16
DCD TIM17_IRQHandler ; TIM17
DCD I2C1_IRQHandler ; I2C1
DCD I2C2_IRQHandler ; I2C2
DCD SPI1_IRQHandler ; SPI1
DCD SPI2_IRQHandler ; SPI2
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD USART3_8_IRQHandler ; USART3, USART4, USART5, USART6, USART7, USART8
DCD CEC_CAN_IRQHandler ; CEC and CAN
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Default interrupt handlers.
;;
THUMB
PUBWEAK Reset_Handler
SECTION .text:CODE:NOROOT:REORDER(2)
Reset_Handler
LDR R0, =SystemInit
BLX R0
LDR R0, =__iar_program_start
BX R0
PUBWEAK NMI_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
NMI_Handler
B NMI_Handler
PUBWEAK HardFault_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
HardFault_Handler
B HardFault_Handler
PUBWEAK SVC_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
SVC_Handler
B SVC_Handler
PUBWEAK PendSV_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
PendSV_Handler
B PendSV_Handler
PUBWEAK SysTick_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
SysTick_Handler
B SysTick_Handler
PUBWEAK WWDG_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
WWDG_IRQHandler
B WWDG_IRQHandler
PUBWEAK PVD_VDDIO2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
PVD_VDDIO2_IRQHandler
B PVD_VDDIO2_IRQHandler
PUBWEAK RTC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
RTC_IRQHandler
B RTC_IRQHandler
PUBWEAK FLASH_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
FLASH_IRQHandler
B FLASH_IRQHandler
PUBWEAK RCC_CRS_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
RCC_CRS_IRQHandler
B RCC_CRS_IRQHandler
PUBWEAK EXTI0_1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI0_1_IRQHandler
B EXTI0_1_IRQHandler
PUBWEAK EXTI2_3_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI2_3_IRQHandler
B EXTI2_3_IRQHandler
PUBWEAK EXTI4_15_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI4_15_IRQHandler
B EXTI4_15_IRQHandler
PUBWEAK TSC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TSC_IRQHandler
B TSC_IRQHandler
PUBWEAK DMA1_Ch1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Ch1_IRQHandler
B DMA1_Ch1_IRQHandler
PUBWEAK DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
B DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
PUBWEAK DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
B DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
PUBWEAK ADC1_COMP_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
ADC1_COMP_IRQHandler
B ADC1_COMP_IRQHandler
PUBWEAK TIM1_BRK_UP_TRG_COM_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM1_BRK_UP_TRG_COM_IRQHandler
B TIM1_BRK_UP_TRG_COM_IRQHandler
PUBWEAK TIM1_CC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM1_CC_IRQHandler
B TIM1_CC_IRQHandler
PUBWEAK TIM2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM2_IRQHandler
B TIM2_IRQHandler
PUBWEAK TIM3_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM3_IRQHandler
B TIM3_IRQHandler
PUBWEAK TIM6_DAC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM6_DAC_IRQHandler
B TIM6_DAC_IRQHandler
PUBWEAK TIM7_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM7_IRQHandler
B TIM7_IRQHandler
PUBWEAK TIM14_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM14_IRQHandler
B TIM14_IRQHandler
PUBWEAK TIM15_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM15_IRQHandler
B TIM15_IRQHandler
PUBWEAK TIM16_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM16_IRQHandler
B TIM16_IRQHandler
PUBWEAK TIM17_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM17_IRQHandler
B TIM17_IRQHandler
PUBWEAK I2C1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
I2C1_IRQHandler
B I2C1_IRQHandler
PUBWEAK I2C2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
I2C2_IRQHandler
B I2C2_IRQHandler
PUBWEAK SPI1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
SPI1_IRQHandler
B SPI1_IRQHandler
PUBWEAK SPI2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
SPI2_IRQHandler
B SPI2_IRQHandler
PUBWEAK USART1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
USART1_IRQHandler
B USART1_IRQHandler
PUBWEAK USART2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
USART2_IRQHandler
B USART2_IRQHandler
PUBWEAK USART3_8_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
USART3_8_IRQHandler
B USART3_8_IRQHandler
PUBWEAK CEC_CAN_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
CEC_CAN_IRQHandler
B CEC_CAN_IRQHandler
END
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
|
aegean-odyssey/mpmd_marlin_1.1.x
| 11,305
|
STM32Cube-1.10.1/Projects/STM32F091RC-Nucleo/Examples/I2C/I2C_TwoBoards_ComPolling/MDK-ARM/startup_stm32f091xc.s
|
;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
;* File Name : startup_stm32f091xc.s
;* Author : MCD Application Team
;* Description : STM32F091xc/STM32F098xc devices vector table for MDK-ARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == Reset_Handler
;* - Set the vector table entries with the exceptions ISR address
;* - Branches to __main in the C library (which eventually
;* calls main()).
;* After Reset the CortexM0 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;*******************************************************************************
;
;* Redistribution and use in source and binary forms, with or without modification,
;* are permitted provided that the following conditions are met:
;* 1. Redistributions of source code must retain the above copyright notice,
;* this list of conditions and the following disclaimer.
;* 2. Redistributions in binary form must reproduce the above copyright notice,
;* this list of conditions and the following disclaimer in the documentation
;* and/or other materials provided with the distribution.
;* 3. Neither the name of STMicroelectronics nor the names of its contributors
;* may be used to endorse or promote products derived from this software
;* without specific prior written permission.
;*
;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
;
;*******************************************************************************
; Amount of memory (in bytes) allocated for Stack
; Tailor this value to your application needs
; <h> Stack Configuration
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Stack_Size EQU 0x400;
AREA STACK, NOINIT, READWRITE, ALIGN=3
Stack_Mem SPACE Stack_Size
__initial_sp
; <h> Heap Configuration
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Heap_Size EQU 0x200;
AREA HEAP, NOINIT, READWRITE, ALIGN=3
__heap_base
Heap_Mem SPACE Heap_Size
__heap_limit
PRESERVE8
THUMB
; Vector Table Mapped to Address 0 at Reset
AREA RESET, DATA, READONLY
EXPORT __Vectors
EXPORT __Vectors_End
EXPORT __Vectors_Size
__Vectors DCD __initial_sp ; Top of Stack
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window Watchdog
DCD PVD_VDDIO2_IRQHandler ; PVD through EXTI Line detect
DCD RTC_IRQHandler ; RTC through EXTI Line
DCD FLASH_IRQHandler ; FLASH
DCD RCC_CRS_IRQHandler ; RCC and CRS
DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
DCD TSC_IRQHandler ; TS
DCD DMA1_Ch1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler ; DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2
DCD DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler ; DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5
DCD ADC1_COMP_IRQHandler ; ADC1, COMP1 and COMP2
DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC
DCD TIM7_IRQHandler ; TIM7
DCD TIM14_IRQHandler ; TIM14
DCD TIM15_IRQHandler ; TIM15
DCD TIM16_IRQHandler ; TIM16
DCD TIM17_IRQHandler ; TIM17
DCD I2C1_IRQHandler ; I2C1
DCD I2C2_IRQHandler ; I2C2
DCD SPI1_IRQHandler ; SPI1
DCD SPI2_IRQHandler ; SPI2
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD USART3_8_IRQHandler ; USART3, USART4, USART5, USART6, USART7, USART8
DCD CEC_CAN_IRQHandler ; CEC and CAN
__Vectors_End
__Vectors_Size EQU __Vectors_End - __Vectors
AREA |.text|, CODE, READONLY
; Reset handler routine
Reset_Handler PROC
EXPORT Reset_Handler [WEAK]
IMPORT __main
IMPORT SystemInit
LDR R0, =SystemInit
BLX R0
LDR R0, =__main
BX R0
ENDP
; Dummy Exception Handlers (infinite loops which can be modified)
NMI_Handler PROC
EXPORT NMI_Handler [WEAK]
B .
ENDP
HardFault_Handler\
PROC
EXPORT HardFault_Handler [WEAK]
B .
ENDP
SVC_Handler PROC
EXPORT SVC_Handler [WEAK]
B .
ENDP
PendSV_Handler PROC
EXPORT PendSV_Handler [WEAK]
B .
ENDP
SysTick_Handler PROC
EXPORT SysTick_Handler [WEAK]
B .
ENDP
Default_Handler PROC
EXPORT WWDG_IRQHandler [WEAK]
EXPORT PVD_VDDIO2_IRQHandler [WEAK]
EXPORT RTC_IRQHandler [WEAK]
EXPORT FLASH_IRQHandler [WEAK]
EXPORT RCC_CRS_IRQHandler [WEAK]
EXPORT EXTI0_1_IRQHandler [WEAK]
EXPORT EXTI2_3_IRQHandler [WEAK]
EXPORT EXTI4_15_IRQHandler [WEAK]
EXPORT TSC_IRQHandler [WEAK]
EXPORT DMA1_Ch1_IRQHandler [WEAK]
EXPORT DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler [WEAK]
EXPORT DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler [WEAK]
EXPORT ADC1_COMP_IRQHandler [WEAK]
EXPORT TIM1_BRK_UP_TRG_COM_IRQHandler [WEAK]
EXPORT TIM1_CC_IRQHandler [WEAK]
EXPORT TIM2_IRQHandler [WEAK]
EXPORT TIM3_IRQHandler [WEAK]
EXPORT TIM6_DAC_IRQHandler [WEAK]
EXPORT TIM7_IRQHandler [WEAK]
EXPORT TIM14_IRQHandler [WEAK]
EXPORT TIM15_IRQHandler [WEAK]
EXPORT TIM16_IRQHandler [WEAK]
EXPORT TIM17_IRQHandler [WEAK]
EXPORT I2C1_IRQHandler [WEAK]
EXPORT I2C2_IRQHandler [WEAK]
EXPORT SPI1_IRQHandler [WEAK]
EXPORT SPI2_IRQHandler [WEAK]
EXPORT USART1_IRQHandler [WEAK]
EXPORT USART2_IRQHandler [WEAK]
EXPORT USART3_8_IRQHandler [WEAK]
EXPORT CEC_CAN_IRQHandler [WEAK]
WWDG_IRQHandler
PVD_VDDIO2_IRQHandler
RTC_IRQHandler
FLASH_IRQHandler
RCC_CRS_IRQHandler
EXTI0_1_IRQHandler
EXTI2_3_IRQHandler
EXTI4_15_IRQHandler
TSC_IRQHandler
DMA1_Ch1_IRQHandler
DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
ADC1_COMP_IRQHandler
TIM1_BRK_UP_TRG_COM_IRQHandler
TIM1_CC_IRQHandler
TIM2_IRQHandler
TIM3_IRQHandler
TIM6_DAC_IRQHandler
TIM7_IRQHandler
TIM14_IRQHandler
TIM15_IRQHandler
TIM16_IRQHandler
TIM17_IRQHandler
I2C1_IRQHandler
I2C2_IRQHandler
SPI1_IRQHandler
SPI2_IRQHandler
USART1_IRQHandler
USART2_IRQHandler
USART3_8_IRQHandler
CEC_CAN_IRQHandler
B .
ENDP
ALIGN
;*******************************************************************************
; User Stack and Heap initialization
;*******************************************************************************
IF :DEF:__MICROLIB
EXPORT __initial_sp
EXPORT __heap_base
EXPORT __heap_limit
ELSE
IMPORT __use_two_region_memory
EXPORT __user_initial_stackheap
__user_initial_stackheap
LDR R0, = Heap_Mem
LDR R1, =(Stack_Mem + Stack_Size)
LDR R2, = (Heap_Mem + Heap_Size)
LDR R3, = Stack_Mem
BX LR
ALIGN
ENDIF
END
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
|
aegean-odyssey/mpmd_marlin_1.1.x
| 10,745
|
STM32Cube-1.10.1/Projects/STM32F091RC-Nucleo/Examples/I2C/I2C_TwoBoards_ComPolling/SW4STM32/startup_stm32f091xc.s
|
/**
******************************************************************************
* @file startup_stm32f091xc.s
* @author MCD Application Team
* @brief STM32F091xC devices vector table for GCC toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M0 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
.syntax unified
.cpu cortex-m0
.fpu softvfp
.thumb
.global g_pfnVectors
.global Default_Handler
/* start address for the initialization values of the .data section.
defined in linker script */
.word _sidata
/* start address for the .data section. defined in linker script */
.word _sdata
/* end address for the .data section. defined in linker script */
.word _edata
/* start address for the .bss section. defined in linker script */
.word _sbss
/* end address for the .bss section. defined in linker script */
.word _ebss
.section .text.Reset_Handler
.weak Reset_Handler
.type Reset_Handler, %function
Reset_Handler:
ldr r0, =_estack
mov sp, r0 /* set stack pointer */
/* Copy the data segment initializers from flash to SRAM */
movs r1, #0
b LoopCopyDataInit
CopyDataInit:
ldr r3, =_sidata
ldr r3, [r3, r1]
str r3, [r0, r1]
adds r1, r1, #4
LoopCopyDataInit:
ldr r0, =_sdata
ldr r3, =_edata
adds r2, r0, r1
cmp r2, r3
bcc CopyDataInit
ldr r2, =_sbss
b LoopFillZerobss
/* Zero fill the bss segment. */
FillZerobss:
movs r3, #0
str r3, [r2]
adds r2, r2, #4
LoopFillZerobss:
ldr r3, = _ebss
cmp r2, r3
bcc FillZerobss
/* Call the clock system intitialization function.*/
bl SystemInit
/* Call static constructors */
bl __libc_init_array
/* Call the application's entry point.*/
bl main
LoopForever:
b LoopForever
.size Reset_Handler, .-Reset_Handler
/**
* @brief This is the code that gets called when the processor receives an
* unexpected interrupt. This simply enters an infinite loop, preserving
* the system state for examination by a debugger.
*
* @param None
* @retval : None
*/
.section .text.Default_Handler,"ax",%progbits
Default_Handler:
Infinite_Loop:
b Infinite_Loop
.size Default_Handler, .-Default_Handler
/******************************************************************************
*
* The minimal vector table for a Cortex M0. Note that the proper constructs
* must be placed on this to ensure that it ends up at physical address
* 0x0000.0000.
*
******************************************************************************/
.section .isr_vector,"a",%progbits
.type g_pfnVectors, %object
.size g_pfnVectors, .-g_pfnVectors
g_pfnVectors:
.word _estack
.word Reset_Handler
.word NMI_Handler
.word HardFault_Handler
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word SVC_Handler
.word 0
.word 0
.word PendSV_Handler
.word SysTick_Handler
.word WWDG_IRQHandler /* Window WatchDog */
.word PVD_VDDIO2_IRQHandler /* PVD and VDDIO2 through EXTI Line detect */
.word RTC_IRQHandler /* RTC through the EXTI line */
.word FLASH_IRQHandler /* FLASH */
.word RCC_CRS_IRQHandler /* RCC and CRS */
.word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */
.word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */
.word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */
.word TSC_IRQHandler /* TSC */
.word DMA1_Ch1_IRQHandler /* DMA1 Channel 1 */
.word DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler /* DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2 */
.word DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler /* DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5 */
.word ADC1_COMP_IRQHandler /* ADC1, COMP1 and COMP2 */
.word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */
.word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
.word TIM2_IRQHandler /* TIM2 */
.word TIM3_IRQHandler /* TIM3 */
.word TIM6_DAC_IRQHandler /* TIM6 and DAC */
.word TIM7_IRQHandler /* TIM7 */
.word TIM14_IRQHandler /* TIM14 */
.word TIM15_IRQHandler /* TIM15 */
.word TIM16_IRQHandler /* TIM16 */
.word TIM17_IRQHandler /* TIM17 */
.word I2C1_IRQHandler /* I2C1 */
.word I2C2_IRQHandler /* I2C2 */
.word SPI1_IRQHandler /* SPI1 */
.word SPI2_IRQHandler /* SPI2 */
.word USART1_IRQHandler /* USART1 */
.word USART2_IRQHandler /* USART2 */
.word USART3_8_IRQHandler /* USART3, USART4, USART5, USART6, USART7, USART8 */
.word CEC_CAN_IRQHandler /* CEC and CAN */
/*******************************************************************************
*
* Provide weak aliases for each Exception handler to the Default_Handler.
* As they are weak aliases, any function with the same name will override
* this definition.
*
*******************************************************************************/
.weak NMI_Handler
.thumb_set NMI_Handler,Default_Handler
.weak HardFault_Handler
.thumb_set HardFault_Handler,Default_Handler
.weak SVC_Handler
.thumb_set SVC_Handler,Default_Handler
.weak PendSV_Handler
.thumb_set PendSV_Handler,Default_Handler
.weak SysTick_Handler
.thumb_set SysTick_Handler,Default_Handler
.weak WWDG_IRQHandler
.thumb_set WWDG_IRQHandler,Default_Handler
.weak PVD_VDDIO2_IRQHandler
.thumb_set PVD_VDDIO2_IRQHandler,Default_Handler
.weak RTC_IRQHandler
.thumb_set RTC_IRQHandler,Default_Handler
.weak FLASH_IRQHandler
.thumb_set FLASH_IRQHandler,Default_Handler
.weak RCC_CRS_IRQHandler
.thumb_set RCC_CRS_IRQHandler,Default_Handler
.weak EXTI0_1_IRQHandler
.thumb_set EXTI0_1_IRQHandler,Default_Handler
.weak EXTI2_3_IRQHandler
.thumb_set EXTI2_3_IRQHandler,Default_Handler
.weak EXTI4_15_IRQHandler
.thumb_set EXTI4_15_IRQHandler,Default_Handler
.weak TSC_IRQHandler
.thumb_set TSC_IRQHandler,Default_Handler
.weak DMA1_Ch1_IRQHandler
.thumb_set DMA1_Ch1_IRQHandler,Default_Handler
.weak DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
.thumb_set DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler,Default_Handler
.weak DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
.thumb_set DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler,Default_Handler
.weak ADC1_COMP_IRQHandler
.thumb_set ADC1_COMP_IRQHandler,Default_Handler
.weak TIM1_BRK_UP_TRG_COM_IRQHandler
.thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
.weak TIM1_CC_IRQHandler
.thumb_set TIM1_CC_IRQHandler,Default_Handler
.weak TIM2_IRQHandler
.thumb_set TIM2_IRQHandler,Default_Handler
.weak TIM3_IRQHandler
.thumb_set TIM3_IRQHandler,Default_Handler
.weak TIM6_DAC_IRQHandler
.thumb_set TIM6_DAC_IRQHandler,Default_Handler
.weak TIM7_IRQHandler
.thumb_set TIM7_IRQHandler,Default_Handler
.weak TIM14_IRQHandler
.thumb_set TIM14_IRQHandler,Default_Handler
.weak TIM15_IRQHandler
.thumb_set TIM15_IRQHandler,Default_Handler
.weak TIM16_IRQHandler
.thumb_set TIM16_IRQHandler,Default_Handler
.weak TIM17_IRQHandler
.thumb_set TIM17_IRQHandler,Default_Handler
.weak I2C1_IRQHandler
.thumb_set I2C1_IRQHandler,Default_Handler
.weak I2C2_IRQHandler
.thumb_set I2C2_IRQHandler,Default_Handler
.weak SPI1_IRQHandler
.thumb_set SPI1_IRQHandler,Default_Handler
.weak SPI2_IRQHandler
.thumb_set SPI2_IRQHandler,Default_Handler
.weak USART1_IRQHandler
.thumb_set USART1_IRQHandler,Default_Handler
.weak USART2_IRQHandler
.thumb_set USART2_IRQHandler,Default_Handler
.weak USART3_8_IRQHandler
.thumb_set USART3_8_IRQHandler,Default_Handler
.weak CEC_CAN_IRQHandler
.thumb_set CEC_CAN_IRQHandler,Default_Handler
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
aegean-odyssey/mpmd_marlin_1.1.x
| 11,410
|
STM32Cube-1.10.1/Projects/STM32F091RC-Nucleo/Examples/I2C/I2C_TwoBoards_ComPolling/EWARM/startup_stm32f091xc.s
|
;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
;* File Name : startup_stm32f091xc.s
;* Author : MCD Application Team
;* Description : STM32F091xc/STM32F098xc devices vector table for EWARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == __iar_program_start,
;* - Set the vector table entries with the exceptions ISR
;* address,
;* - Branches to main in the C library (which eventually
;* calls main()).
;* After Reset the Cortex-M0 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;*******************************************************************************
;*
;* Redistribution and use in source and binary forms, with or without modification,
;* are permitted provided that the following conditions are met:
;* 1. Redistributions of source code must retain the above copyright notice,
;* this list of conditions and the following disclaimer.
;* 2. Redistributions in binary form must reproduce the above copyright notice,
;* this list of conditions and the following disclaimer in the documentation
;* and/or other materials provided with the distribution.
;* 3. Neither the name of STMicroelectronics nor the names of its contributors
;* may be used to endorse or promote products derived from this software
;* without specific prior written permission.
;*
;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
;*
;*******************************************************************************
;
;
; The modules in this file are included in the libraries, and may be replaced
; by any user-defined modules that define the PUBLIC symbol _program_start or
; a user defined start symbol.
; To override the cstartup defined in the library, simply add your modified
; version to the workbench project.
;
; The vector table is normally located at address 0.
; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
; The name "__vector_table" has special meaning for C-SPY:
; it is where the SP start value is found, and the NVIC vector
; table register (VTOR) is initialized to this address if != 0.
;
; Cortex-M version
;
MODULE ?cstartup
;; Forward declaration of sections.
SECTION CSTACK:DATA:NOROOT(3)
SECTION .intvec:CODE:NOROOT(2)
EXTERN __iar_program_start
EXTERN SystemInit
PUBLIC __vector_table
DATA
__vector_table
DCD sfe(CSTACK)
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window Watchdog
DCD PVD_VDDIO2_IRQHandler ; PVD and VDDIO2 through EXTI Line detect
DCD RTC_IRQHandler ; RTC through EXTI Line
DCD FLASH_IRQHandler ; FLASH
DCD RCC_CRS_IRQHandler ; RCC and CRS
DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
DCD TSC_IRQHandler ; TS
DCD DMA1_Ch1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler ; DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2
DCD DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler ; DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5
DCD ADC1_COMP_IRQHandler ; ADC1, COMP1 and COMP2
DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC
DCD TIM7_IRQHandler ; TIM7
DCD TIM14_IRQHandler ; TIM14
DCD TIM15_IRQHandler ; TIM15
DCD TIM16_IRQHandler ; TIM16
DCD TIM17_IRQHandler ; TIM17
DCD I2C1_IRQHandler ; I2C1
DCD I2C2_IRQHandler ; I2C2
DCD SPI1_IRQHandler ; SPI1
DCD SPI2_IRQHandler ; SPI2
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD USART3_8_IRQHandler ; USART3, USART4, USART5, USART6, USART7, USART8
DCD CEC_CAN_IRQHandler ; CEC and CAN
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Default interrupt handlers.
;;
THUMB
PUBWEAK Reset_Handler
SECTION .text:CODE:NOROOT:REORDER(2)
Reset_Handler
LDR R0, =SystemInit
BLX R0
LDR R0, =__iar_program_start
BX R0
PUBWEAK NMI_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
NMI_Handler
B NMI_Handler
PUBWEAK HardFault_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
HardFault_Handler
B HardFault_Handler
PUBWEAK SVC_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
SVC_Handler
B SVC_Handler
PUBWEAK PendSV_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
PendSV_Handler
B PendSV_Handler
PUBWEAK SysTick_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
SysTick_Handler
B SysTick_Handler
PUBWEAK WWDG_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
WWDG_IRQHandler
B WWDG_IRQHandler
PUBWEAK PVD_VDDIO2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
PVD_VDDIO2_IRQHandler
B PVD_VDDIO2_IRQHandler
PUBWEAK RTC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
RTC_IRQHandler
B RTC_IRQHandler
PUBWEAK FLASH_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
FLASH_IRQHandler
B FLASH_IRQHandler
PUBWEAK RCC_CRS_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
RCC_CRS_IRQHandler
B RCC_CRS_IRQHandler
PUBWEAK EXTI0_1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI0_1_IRQHandler
B EXTI0_1_IRQHandler
PUBWEAK EXTI2_3_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI2_3_IRQHandler
B EXTI2_3_IRQHandler
PUBWEAK EXTI4_15_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI4_15_IRQHandler
B EXTI4_15_IRQHandler
PUBWEAK TSC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TSC_IRQHandler
B TSC_IRQHandler
PUBWEAK DMA1_Ch1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Ch1_IRQHandler
B DMA1_Ch1_IRQHandler
PUBWEAK DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
B DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
PUBWEAK DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
B DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
PUBWEAK ADC1_COMP_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
ADC1_COMP_IRQHandler
B ADC1_COMP_IRQHandler
PUBWEAK TIM1_BRK_UP_TRG_COM_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM1_BRK_UP_TRG_COM_IRQHandler
B TIM1_BRK_UP_TRG_COM_IRQHandler
PUBWEAK TIM1_CC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM1_CC_IRQHandler
B TIM1_CC_IRQHandler
PUBWEAK TIM2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM2_IRQHandler
B TIM2_IRQHandler
PUBWEAK TIM3_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM3_IRQHandler
B TIM3_IRQHandler
PUBWEAK TIM6_DAC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM6_DAC_IRQHandler
B TIM6_DAC_IRQHandler
PUBWEAK TIM7_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM7_IRQHandler
B TIM7_IRQHandler
PUBWEAK TIM14_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM14_IRQHandler
B TIM14_IRQHandler
PUBWEAK TIM15_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM15_IRQHandler
B TIM15_IRQHandler
PUBWEAK TIM16_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM16_IRQHandler
B TIM16_IRQHandler
PUBWEAK TIM17_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM17_IRQHandler
B TIM17_IRQHandler
PUBWEAK I2C1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
I2C1_IRQHandler
B I2C1_IRQHandler
PUBWEAK I2C2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
I2C2_IRQHandler
B I2C2_IRQHandler
PUBWEAK SPI1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
SPI1_IRQHandler
B SPI1_IRQHandler
PUBWEAK SPI2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
SPI2_IRQHandler
B SPI2_IRQHandler
PUBWEAK USART1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
USART1_IRQHandler
B USART1_IRQHandler
PUBWEAK USART2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
USART2_IRQHandler
B USART2_IRQHandler
PUBWEAK USART3_8_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
USART3_8_IRQHandler
B USART3_8_IRQHandler
PUBWEAK CEC_CAN_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
CEC_CAN_IRQHandler
B CEC_CAN_IRQHandler
END
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
|
aegean-odyssey/mpmd_marlin_1.1.x
| 11,305
|
STM32Cube-1.10.1/Projects/STM32F091RC-Nucleo/Examples/I2C/I2C_TwoBoards_AdvComIT/MDK-ARM/startup_stm32f091xc.s
|
;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
;* File Name : startup_stm32f091xc.s
;* Author : MCD Application Team
;* Description : STM32F091xc/STM32F098xc devices vector table for MDK-ARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == Reset_Handler
;* - Set the vector table entries with the exceptions ISR address
;* - Branches to __main in the C library (which eventually
;* calls main()).
;* After Reset the CortexM0 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;*******************************************************************************
;
;* Redistribution and use in source and binary forms, with or without modification,
;* are permitted provided that the following conditions are met:
;* 1. Redistributions of source code must retain the above copyright notice,
;* this list of conditions and the following disclaimer.
;* 2. Redistributions in binary form must reproduce the above copyright notice,
;* this list of conditions and the following disclaimer in the documentation
;* and/or other materials provided with the distribution.
;* 3. Neither the name of STMicroelectronics nor the names of its contributors
;* may be used to endorse or promote products derived from this software
;* without specific prior written permission.
;*
;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
;
;*******************************************************************************
; Amount of memory (in bytes) allocated for Stack
; Tailor this value to your application needs
; <h> Stack Configuration
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Stack_Size EQU 0x400;
AREA STACK, NOINIT, READWRITE, ALIGN=3
Stack_Mem SPACE Stack_Size
__initial_sp
; <h> Heap Configuration
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Heap_Size EQU 0x200;
AREA HEAP, NOINIT, READWRITE, ALIGN=3
__heap_base
Heap_Mem SPACE Heap_Size
__heap_limit
PRESERVE8
THUMB
; Vector Table Mapped to Address 0 at Reset
AREA RESET, DATA, READONLY
EXPORT __Vectors
EXPORT __Vectors_End
EXPORT __Vectors_Size
__Vectors DCD __initial_sp ; Top of Stack
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window Watchdog
DCD PVD_VDDIO2_IRQHandler ; PVD through EXTI Line detect
DCD RTC_IRQHandler ; RTC through EXTI Line
DCD FLASH_IRQHandler ; FLASH
DCD RCC_CRS_IRQHandler ; RCC and CRS
DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
DCD TSC_IRQHandler ; TS
DCD DMA1_Ch1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler ; DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2
DCD DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler ; DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5
DCD ADC1_COMP_IRQHandler ; ADC1, COMP1 and COMP2
DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC
DCD TIM7_IRQHandler ; TIM7
DCD TIM14_IRQHandler ; TIM14
DCD TIM15_IRQHandler ; TIM15
DCD TIM16_IRQHandler ; TIM16
DCD TIM17_IRQHandler ; TIM17
DCD I2C1_IRQHandler ; I2C1
DCD I2C2_IRQHandler ; I2C2
DCD SPI1_IRQHandler ; SPI1
DCD SPI2_IRQHandler ; SPI2
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD USART3_8_IRQHandler ; USART3, USART4, USART5, USART6, USART7, USART8
DCD CEC_CAN_IRQHandler ; CEC and CAN
__Vectors_End
__Vectors_Size EQU __Vectors_End - __Vectors
AREA |.text|, CODE, READONLY
; Reset handler routine
Reset_Handler PROC
EXPORT Reset_Handler [WEAK]
IMPORT __main
IMPORT SystemInit
LDR R0, =SystemInit
BLX R0
LDR R0, =__main
BX R0
ENDP
; Dummy Exception Handlers (infinite loops which can be modified)
NMI_Handler PROC
EXPORT NMI_Handler [WEAK]
B .
ENDP
HardFault_Handler\
PROC
EXPORT HardFault_Handler [WEAK]
B .
ENDP
SVC_Handler PROC
EXPORT SVC_Handler [WEAK]
B .
ENDP
PendSV_Handler PROC
EXPORT PendSV_Handler [WEAK]
B .
ENDP
SysTick_Handler PROC
EXPORT SysTick_Handler [WEAK]
B .
ENDP
Default_Handler PROC
EXPORT WWDG_IRQHandler [WEAK]
EXPORT PVD_VDDIO2_IRQHandler [WEAK]
EXPORT RTC_IRQHandler [WEAK]
EXPORT FLASH_IRQHandler [WEAK]
EXPORT RCC_CRS_IRQHandler [WEAK]
EXPORT EXTI0_1_IRQHandler [WEAK]
EXPORT EXTI2_3_IRQHandler [WEAK]
EXPORT EXTI4_15_IRQHandler [WEAK]
EXPORT TSC_IRQHandler [WEAK]
EXPORT DMA1_Ch1_IRQHandler [WEAK]
EXPORT DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler [WEAK]
EXPORT DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler [WEAK]
EXPORT ADC1_COMP_IRQHandler [WEAK]
EXPORT TIM1_BRK_UP_TRG_COM_IRQHandler [WEAK]
EXPORT TIM1_CC_IRQHandler [WEAK]
EXPORT TIM2_IRQHandler [WEAK]
EXPORT TIM3_IRQHandler [WEAK]
EXPORT TIM6_DAC_IRQHandler [WEAK]
EXPORT TIM7_IRQHandler [WEAK]
EXPORT TIM14_IRQHandler [WEAK]
EXPORT TIM15_IRQHandler [WEAK]
EXPORT TIM16_IRQHandler [WEAK]
EXPORT TIM17_IRQHandler [WEAK]
EXPORT I2C1_IRQHandler [WEAK]
EXPORT I2C2_IRQHandler [WEAK]
EXPORT SPI1_IRQHandler [WEAK]
EXPORT SPI2_IRQHandler [WEAK]
EXPORT USART1_IRQHandler [WEAK]
EXPORT USART2_IRQHandler [WEAK]
EXPORT USART3_8_IRQHandler [WEAK]
EXPORT CEC_CAN_IRQHandler [WEAK]
WWDG_IRQHandler
PVD_VDDIO2_IRQHandler
RTC_IRQHandler
FLASH_IRQHandler
RCC_CRS_IRQHandler
EXTI0_1_IRQHandler
EXTI2_3_IRQHandler
EXTI4_15_IRQHandler
TSC_IRQHandler
DMA1_Ch1_IRQHandler
DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
ADC1_COMP_IRQHandler
TIM1_BRK_UP_TRG_COM_IRQHandler
TIM1_CC_IRQHandler
TIM2_IRQHandler
TIM3_IRQHandler
TIM6_DAC_IRQHandler
TIM7_IRQHandler
TIM14_IRQHandler
TIM15_IRQHandler
TIM16_IRQHandler
TIM17_IRQHandler
I2C1_IRQHandler
I2C2_IRQHandler
SPI1_IRQHandler
SPI2_IRQHandler
USART1_IRQHandler
USART2_IRQHandler
USART3_8_IRQHandler
CEC_CAN_IRQHandler
B .
ENDP
ALIGN
;*******************************************************************************
; User Stack and Heap initialization
;*******************************************************************************
IF :DEF:__MICROLIB
EXPORT __initial_sp
EXPORT __heap_base
EXPORT __heap_limit
ELSE
IMPORT __use_two_region_memory
EXPORT __user_initial_stackheap
__user_initial_stackheap
LDR R0, = Heap_Mem
LDR R1, =(Stack_Mem + Stack_Size)
LDR R2, = (Heap_Mem + Heap_Size)
LDR R3, = Stack_Mem
BX LR
ALIGN
ENDIF
END
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
|
aegean-odyssey/mpmd_marlin_1.1.x
| 10,745
|
STM32Cube-1.10.1/Projects/STM32F091RC-Nucleo/Examples/I2C/I2C_TwoBoards_AdvComIT/SW4STM32/startup_stm32f091xc.s
|
/**
******************************************************************************
* @file startup_stm32f091xc.s
* @author MCD Application Team
* @brief STM32F091xC devices vector table for GCC toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M0 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
.syntax unified
.cpu cortex-m0
.fpu softvfp
.thumb
.global g_pfnVectors
.global Default_Handler
/* start address for the initialization values of the .data section.
defined in linker script */
.word _sidata
/* start address for the .data section. defined in linker script */
.word _sdata
/* end address for the .data section. defined in linker script */
.word _edata
/* start address for the .bss section. defined in linker script */
.word _sbss
/* end address for the .bss section. defined in linker script */
.word _ebss
.section .text.Reset_Handler
.weak Reset_Handler
.type Reset_Handler, %function
Reset_Handler:
ldr r0, =_estack
mov sp, r0 /* set stack pointer */
/* Copy the data segment initializers from flash to SRAM */
movs r1, #0
b LoopCopyDataInit
CopyDataInit:
ldr r3, =_sidata
ldr r3, [r3, r1]
str r3, [r0, r1]
adds r1, r1, #4
LoopCopyDataInit:
ldr r0, =_sdata
ldr r3, =_edata
adds r2, r0, r1
cmp r2, r3
bcc CopyDataInit
ldr r2, =_sbss
b LoopFillZerobss
/* Zero fill the bss segment. */
FillZerobss:
movs r3, #0
str r3, [r2]
adds r2, r2, #4
LoopFillZerobss:
ldr r3, = _ebss
cmp r2, r3
bcc FillZerobss
/* Call the clock system intitialization function.*/
bl SystemInit
/* Call static constructors */
bl __libc_init_array
/* Call the application's entry point.*/
bl main
LoopForever:
b LoopForever
.size Reset_Handler, .-Reset_Handler
/**
* @brief This is the code that gets called when the processor receives an
* unexpected interrupt. This simply enters an infinite loop, preserving
* the system state for examination by a debugger.
*
* @param None
* @retval : None
*/
.section .text.Default_Handler,"ax",%progbits
Default_Handler:
Infinite_Loop:
b Infinite_Loop
.size Default_Handler, .-Default_Handler
/******************************************************************************
*
* The minimal vector table for a Cortex M0. Note that the proper constructs
* must be placed on this to ensure that it ends up at physical address
* 0x0000.0000.
*
******************************************************************************/
.section .isr_vector,"a",%progbits
.type g_pfnVectors, %object
.size g_pfnVectors, .-g_pfnVectors
g_pfnVectors:
.word _estack
.word Reset_Handler
.word NMI_Handler
.word HardFault_Handler
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word SVC_Handler
.word 0
.word 0
.word PendSV_Handler
.word SysTick_Handler
.word WWDG_IRQHandler /* Window WatchDog */
.word PVD_VDDIO2_IRQHandler /* PVD and VDDIO2 through EXTI Line detect */
.word RTC_IRQHandler /* RTC through the EXTI line */
.word FLASH_IRQHandler /* FLASH */
.word RCC_CRS_IRQHandler /* RCC and CRS */
.word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */
.word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */
.word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */
.word TSC_IRQHandler /* TSC */
.word DMA1_Ch1_IRQHandler /* DMA1 Channel 1 */
.word DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler /* DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2 */
.word DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler /* DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5 */
.word ADC1_COMP_IRQHandler /* ADC1, COMP1 and COMP2 */
.word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */
.word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
.word TIM2_IRQHandler /* TIM2 */
.word TIM3_IRQHandler /* TIM3 */
.word TIM6_DAC_IRQHandler /* TIM6 and DAC */
.word TIM7_IRQHandler /* TIM7 */
.word TIM14_IRQHandler /* TIM14 */
.word TIM15_IRQHandler /* TIM15 */
.word TIM16_IRQHandler /* TIM16 */
.word TIM17_IRQHandler /* TIM17 */
.word I2C1_IRQHandler /* I2C1 */
.word I2C2_IRQHandler /* I2C2 */
.word SPI1_IRQHandler /* SPI1 */
.word SPI2_IRQHandler /* SPI2 */
.word USART1_IRQHandler /* USART1 */
.word USART2_IRQHandler /* USART2 */
.word USART3_8_IRQHandler /* USART3, USART4, USART5, USART6, USART7, USART8 */
.word CEC_CAN_IRQHandler /* CEC and CAN */
/*******************************************************************************
*
* Provide weak aliases for each Exception handler to the Default_Handler.
* As they are weak aliases, any function with the same name will override
* this definition.
*
*******************************************************************************/
.weak NMI_Handler
.thumb_set NMI_Handler,Default_Handler
.weak HardFault_Handler
.thumb_set HardFault_Handler,Default_Handler
.weak SVC_Handler
.thumb_set SVC_Handler,Default_Handler
.weak PendSV_Handler
.thumb_set PendSV_Handler,Default_Handler
.weak SysTick_Handler
.thumb_set SysTick_Handler,Default_Handler
.weak WWDG_IRQHandler
.thumb_set WWDG_IRQHandler,Default_Handler
.weak PVD_VDDIO2_IRQHandler
.thumb_set PVD_VDDIO2_IRQHandler,Default_Handler
.weak RTC_IRQHandler
.thumb_set RTC_IRQHandler,Default_Handler
.weak FLASH_IRQHandler
.thumb_set FLASH_IRQHandler,Default_Handler
.weak RCC_CRS_IRQHandler
.thumb_set RCC_CRS_IRQHandler,Default_Handler
.weak EXTI0_1_IRQHandler
.thumb_set EXTI0_1_IRQHandler,Default_Handler
.weak EXTI2_3_IRQHandler
.thumb_set EXTI2_3_IRQHandler,Default_Handler
.weak EXTI4_15_IRQHandler
.thumb_set EXTI4_15_IRQHandler,Default_Handler
.weak TSC_IRQHandler
.thumb_set TSC_IRQHandler,Default_Handler
.weak DMA1_Ch1_IRQHandler
.thumb_set DMA1_Ch1_IRQHandler,Default_Handler
.weak DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
.thumb_set DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler,Default_Handler
.weak DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
.thumb_set DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler,Default_Handler
.weak ADC1_COMP_IRQHandler
.thumb_set ADC1_COMP_IRQHandler,Default_Handler
.weak TIM1_BRK_UP_TRG_COM_IRQHandler
.thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
.weak TIM1_CC_IRQHandler
.thumb_set TIM1_CC_IRQHandler,Default_Handler
.weak TIM2_IRQHandler
.thumb_set TIM2_IRQHandler,Default_Handler
.weak TIM3_IRQHandler
.thumb_set TIM3_IRQHandler,Default_Handler
.weak TIM6_DAC_IRQHandler
.thumb_set TIM6_DAC_IRQHandler,Default_Handler
.weak TIM7_IRQHandler
.thumb_set TIM7_IRQHandler,Default_Handler
.weak TIM14_IRQHandler
.thumb_set TIM14_IRQHandler,Default_Handler
.weak TIM15_IRQHandler
.thumb_set TIM15_IRQHandler,Default_Handler
.weak TIM16_IRQHandler
.thumb_set TIM16_IRQHandler,Default_Handler
.weak TIM17_IRQHandler
.thumb_set TIM17_IRQHandler,Default_Handler
.weak I2C1_IRQHandler
.thumb_set I2C1_IRQHandler,Default_Handler
.weak I2C2_IRQHandler
.thumb_set I2C2_IRQHandler,Default_Handler
.weak SPI1_IRQHandler
.thumb_set SPI1_IRQHandler,Default_Handler
.weak SPI2_IRQHandler
.thumb_set SPI2_IRQHandler,Default_Handler
.weak USART1_IRQHandler
.thumb_set USART1_IRQHandler,Default_Handler
.weak USART2_IRQHandler
.thumb_set USART2_IRQHandler,Default_Handler
.weak USART3_8_IRQHandler
.thumb_set USART3_8_IRQHandler,Default_Handler
.weak CEC_CAN_IRQHandler
.thumb_set CEC_CAN_IRQHandler,Default_Handler
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
aegean-odyssey/mpmd_marlin_1.1.x
| 11,410
|
STM32Cube-1.10.1/Projects/STM32F091RC-Nucleo/Examples/I2C/I2C_TwoBoards_AdvComIT/EWARM/startup_stm32f091xc.s
|
;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
;* File Name : startup_stm32f091xc.s
;* Author : MCD Application Team
;* Description : STM32F091xc/STM32F098xc devices vector table for EWARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == __iar_program_start,
;* - Set the vector table entries with the exceptions ISR
;* address,
;* - Branches to main in the C library (which eventually
;* calls main()).
;* After Reset the Cortex-M0 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;*******************************************************************************
;*
;* Redistribution and use in source and binary forms, with or without modification,
;* are permitted provided that the following conditions are met:
;* 1. Redistributions of source code must retain the above copyright notice,
;* this list of conditions and the following disclaimer.
;* 2. Redistributions in binary form must reproduce the above copyright notice,
;* this list of conditions and the following disclaimer in the documentation
;* and/or other materials provided with the distribution.
;* 3. Neither the name of STMicroelectronics nor the names of its contributors
;* may be used to endorse or promote products derived from this software
;* without specific prior written permission.
;*
;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
;*
;*******************************************************************************
;
;
; The modules in this file are included in the libraries, and may be replaced
; by any user-defined modules that define the PUBLIC symbol _program_start or
; a user defined start symbol.
; To override the cstartup defined in the library, simply add your modified
; version to the workbench project.
;
; The vector table is normally located at address 0.
; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
; The name "__vector_table" has special meaning for C-SPY:
; it is where the SP start value is found, and the NVIC vector
; table register (VTOR) is initialized to this address if != 0.
;
; Cortex-M version
;
MODULE ?cstartup
;; Forward declaration of sections.
SECTION CSTACK:DATA:NOROOT(3)
SECTION .intvec:CODE:NOROOT(2)
EXTERN __iar_program_start
EXTERN SystemInit
PUBLIC __vector_table
DATA
__vector_table
DCD sfe(CSTACK)
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window Watchdog
DCD PVD_VDDIO2_IRQHandler ; PVD and VDDIO2 through EXTI Line detect
DCD RTC_IRQHandler ; RTC through EXTI Line
DCD FLASH_IRQHandler ; FLASH
DCD RCC_CRS_IRQHandler ; RCC and CRS
DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
DCD TSC_IRQHandler ; TS
DCD DMA1_Ch1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler ; DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2
DCD DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler ; DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5
DCD ADC1_COMP_IRQHandler ; ADC1, COMP1 and COMP2
DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC
DCD TIM7_IRQHandler ; TIM7
DCD TIM14_IRQHandler ; TIM14
DCD TIM15_IRQHandler ; TIM15
DCD TIM16_IRQHandler ; TIM16
DCD TIM17_IRQHandler ; TIM17
DCD I2C1_IRQHandler ; I2C1
DCD I2C2_IRQHandler ; I2C2
DCD SPI1_IRQHandler ; SPI1
DCD SPI2_IRQHandler ; SPI2
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD USART3_8_IRQHandler ; USART3, USART4, USART5, USART6, USART7, USART8
DCD CEC_CAN_IRQHandler ; CEC and CAN
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Default interrupt handlers.
;;
THUMB
PUBWEAK Reset_Handler
SECTION .text:CODE:NOROOT:REORDER(2)
Reset_Handler
LDR R0, =SystemInit
BLX R0
LDR R0, =__iar_program_start
BX R0
PUBWEAK NMI_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
NMI_Handler
B NMI_Handler
PUBWEAK HardFault_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
HardFault_Handler
B HardFault_Handler
PUBWEAK SVC_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
SVC_Handler
B SVC_Handler
PUBWEAK PendSV_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
PendSV_Handler
B PendSV_Handler
PUBWEAK SysTick_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
SysTick_Handler
B SysTick_Handler
PUBWEAK WWDG_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
WWDG_IRQHandler
B WWDG_IRQHandler
PUBWEAK PVD_VDDIO2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
PVD_VDDIO2_IRQHandler
B PVD_VDDIO2_IRQHandler
PUBWEAK RTC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
RTC_IRQHandler
B RTC_IRQHandler
PUBWEAK FLASH_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
FLASH_IRQHandler
B FLASH_IRQHandler
PUBWEAK RCC_CRS_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
RCC_CRS_IRQHandler
B RCC_CRS_IRQHandler
PUBWEAK EXTI0_1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI0_1_IRQHandler
B EXTI0_1_IRQHandler
PUBWEAK EXTI2_3_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI2_3_IRQHandler
B EXTI2_3_IRQHandler
PUBWEAK EXTI4_15_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI4_15_IRQHandler
B EXTI4_15_IRQHandler
PUBWEAK TSC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TSC_IRQHandler
B TSC_IRQHandler
PUBWEAK DMA1_Ch1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Ch1_IRQHandler
B DMA1_Ch1_IRQHandler
PUBWEAK DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
B DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
PUBWEAK DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
B DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
PUBWEAK ADC1_COMP_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
ADC1_COMP_IRQHandler
B ADC1_COMP_IRQHandler
PUBWEAK TIM1_BRK_UP_TRG_COM_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM1_BRK_UP_TRG_COM_IRQHandler
B TIM1_BRK_UP_TRG_COM_IRQHandler
PUBWEAK TIM1_CC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM1_CC_IRQHandler
B TIM1_CC_IRQHandler
PUBWEAK TIM2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM2_IRQHandler
B TIM2_IRQHandler
PUBWEAK TIM3_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM3_IRQHandler
B TIM3_IRQHandler
PUBWEAK TIM6_DAC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM6_DAC_IRQHandler
B TIM6_DAC_IRQHandler
PUBWEAK TIM7_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM7_IRQHandler
B TIM7_IRQHandler
PUBWEAK TIM14_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM14_IRQHandler
B TIM14_IRQHandler
PUBWEAK TIM15_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM15_IRQHandler
B TIM15_IRQHandler
PUBWEAK TIM16_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM16_IRQHandler
B TIM16_IRQHandler
PUBWEAK TIM17_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM17_IRQHandler
B TIM17_IRQHandler
PUBWEAK I2C1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
I2C1_IRQHandler
B I2C1_IRQHandler
PUBWEAK I2C2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
I2C2_IRQHandler
B I2C2_IRQHandler
PUBWEAK SPI1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
SPI1_IRQHandler
B SPI1_IRQHandler
PUBWEAK SPI2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
SPI2_IRQHandler
B SPI2_IRQHandler
PUBWEAK USART1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
USART1_IRQHandler
B USART1_IRQHandler
PUBWEAK USART2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
USART2_IRQHandler
B USART2_IRQHandler
PUBWEAK USART3_8_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
USART3_8_IRQHandler
B USART3_8_IRQHandler
PUBWEAK CEC_CAN_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
CEC_CAN_IRQHandler
B CEC_CAN_IRQHandler
END
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
|
aegean-odyssey/mpmd_marlin_1.1.x
| 11,305
|
STM32Cube-1.10.1/Projects/STM32F091RC-Nucleo/Examples/I2C/I2C_WakeUpFromStop/MDK-ARM/startup_stm32f091xc.s
|
;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
;* File Name : startup_stm32f091xc.s
;* Author : MCD Application Team
;* Description : STM32F091xc/STM32F098xc devices vector table for MDK-ARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == Reset_Handler
;* - Set the vector table entries with the exceptions ISR address
;* - Branches to __main in the C library (which eventually
;* calls main()).
;* After Reset the CortexM0 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;*******************************************************************************
;
;* Redistribution and use in source and binary forms, with or without modification,
;* are permitted provided that the following conditions are met:
;* 1. Redistributions of source code must retain the above copyright notice,
;* this list of conditions and the following disclaimer.
;* 2. Redistributions in binary form must reproduce the above copyright notice,
;* this list of conditions and the following disclaimer in the documentation
;* and/or other materials provided with the distribution.
;* 3. Neither the name of STMicroelectronics nor the names of its contributors
;* may be used to endorse or promote products derived from this software
;* without specific prior written permission.
;*
;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
;
;*******************************************************************************
; Amount of memory (in bytes) allocated for Stack
; Tailor this value to your application needs
; <h> Stack Configuration
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Stack_Size EQU 0x400;
AREA STACK, NOINIT, READWRITE, ALIGN=3
Stack_Mem SPACE Stack_Size
__initial_sp
; <h> Heap Configuration
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Heap_Size EQU 0x200;
AREA HEAP, NOINIT, READWRITE, ALIGN=3
__heap_base
Heap_Mem SPACE Heap_Size
__heap_limit
PRESERVE8
THUMB
; Vector Table Mapped to Address 0 at Reset
AREA RESET, DATA, READONLY
EXPORT __Vectors
EXPORT __Vectors_End
EXPORT __Vectors_Size
__Vectors DCD __initial_sp ; Top of Stack
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window Watchdog
DCD PVD_VDDIO2_IRQHandler ; PVD through EXTI Line detect
DCD RTC_IRQHandler ; RTC through EXTI Line
DCD FLASH_IRQHandler ; FLASH
DCD RCC_CRS_IRQHandler ; RCC and CRS
DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
DCD TSC_IRQHandler ; TS
DCD DMA1_Ch1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler ; DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2
DCD DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler ; DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5
DCD ADC1_COMP_IRQHandler ; ADC1, COMP1 and COMP2
DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC
DCD TIM7_IRQHandler ; TIM7
DCD TIM14_IRQHandler ; TIM14
DCD TIM15_IRQHandler ; TIM15
DCD TIM16_IRQHandler ; TIM16
DCD TIM17_IRQHandler ; TIM17
DCD I2C1_IRQHandler ; I2C1
DCD I2C2_IRQHandler ; I2C2
DCD SPI1_IRQHandler ; SPI1
DCD SPI2_IRQHandler ; SPI2
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD USART3_8_IRQHandler ; USART3, USART4, USART5, USART6, USART7, USART8
DCD CEC_CAN_IRQHandler ; CEC and CAN
__Vectors_End
__Vectors_Size EQU __Vectors_End - __Vectors
AREA |.text|, CODE, READONLY
; Reset handler routine
Reset_Handler PROC
EXPORT Reset_Handler [WEAK]
IMPORT __main
IMPORT SystemInit
LDR R0, =SystemInit
BLX R0
LDR R0, =__main
BX R0
ENDP
; Dummy Exception Handlers (infinite loops which can be modified)
NMI_Handler PROC
EXPORT NMI_Handler [WEAK]
B .
ENDP
HardFault_Handler\
PROC
EXPORT HardFault_Handler [WEAK]
B .
ENDP
SVC_Handler PROC
EXPORT SVC_Handler [WEAK]
B .
ENDP
PendSV_Handler PROC
EXPORT PendSV_Handler [WEAK]
B .
ENDP
SysTick_Handler PROC
EXPORT SysTick_Handler [WEAK]
B .
ENDP
Default_Handler PROC
EXPORT WWDG_IRQHandler [WEAK]
EXPORT PVD_VDDIO2_IRQHandler [WEAK]
EXPORT RTC_IRQHandler [WEAK]
EXPORT FLASH_IRQHandler [WEAK]
EXPORT RCC_CRS_IRQHandler [WEAK]
EXPORT EXTI0_1_IRQHandler [WEAK]
EXPORT EXTI2_3_IRQHandler [WEAK]
EXPORT EXTI4_15_IRQHandler [WEAK]
EXPORT TSC_IRQHandler [WEAK]
EXPORT DMA1_Ch1_IRQHandler [WEAK]
EXPORT DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler [WEAK]
EXPORT DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler [WEAK]
EXPORT ADC1_COMP_IRQHandler [WEAK]
EXPORT TIM1_BRK_UP_TRG_COM_IRQHandler [WEAK]
EXPORT TIM1_CC_IRQHandler [WEAK]
EXPORT TIM2_IRQHandler [WEAK]
EXPORT TIM3_IRQHandler [WEAK]
EXPORT TIM6_DAC_IRQHandler [WEAK]
EXPORT TIM7_IRQHandler [WEAK]
EXPORT TIM14_IRQHandler [WEAK]
EXPORT TIM15_IRQHandler [WEAK]
EXPORT TIM16_IRQHandler [WEAK]
EXPORT TIM17_IRQHandler [WEAK]
EXPORT I2C1_IRQHandler [WEAK]
EXPORT I2C2_IRQHandler [WEAK]
EXPORT SPI1_IRQHandler [WEAK]
EXPORT SPI2_IRQHandler [WEAK]
EXPORT USART1_IRQHandler [WEAK]
EXPORT USART2_IRQHandler [WEAK]
EXPORT USART3_8_IRQHandler [WEAK]
EXPORT CEC_CAN_IRQHandler [WEAK]
WWDG_IRQHandler
PVD_VDDIO2_IRQHandler
RTC_IRQHandler
FLASH_IRQHandler
RCC_CRS_IRQHandler
EXTI0_1_IRQHandler
EXTI2_3_IRQHandler
EXTI4_15_IRQHandler
TSC_IRQHandler
DMA1_Ch1_IRQHandler
DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
ADC1_COMP_IRQHandler
TIM1_BRK_UP_TRG_COM_IRQHandler
TIM1_CC_IRQHandler
TIM2_IRQHandler
TIM3_IRQHandler
TIM6_DAC_IRQHandler
TIM7_IRQHandler
TIM14_IRQHandler
TIM15_IRQHandler
TIM16_IRQHandler
TIM17_IRQHandler
I2C1_IRQHandler
I2C2_IRQHandler
SPI1_IRQHandler
SPI2_IRQHandler
USART1_IRQHandler
USART2_IRQHandler
USART3_8_IRQHandler
CEC_CAN_IRQHandler
B .
ENDP
ALIGN
;*******************************************************************************
; User Stack and Heap initialization
;*******************************************************************************
IF :DEF:__MICROLIB
EXPORT __initial_sp
EXPORT __heap_base
EXPORT __heap_limit
ELSE
IMPORT __use_two_region_memory
EXPORT __user_initial_stackheap
__user_initial_stackheap
LDR R0, = Heap_Mem
LDR R1, =(Stack_Mem + Stack_Size)
LDR R2, = (Heap_Mem + Heap_Size)
LDR R3, = Stack_Mem
BX LR
ALIGN
ENDIF
END
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
|
aegean-odyssey/mpmd_marlin_1.1.x
| 10,745
|
STM32Cube-1.10.1/Projects/STM32F091RC-Nucleo/Examples/I2C/I2C_WakeUpFromStop/SW4STM32/startup_stm32f091xc.s
|
/**
******************************************************************************
* @file startup_stm32f091xc.s
* @author MCD Application Team
* @brief STM32F091xC devices vector table for GCC toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M0 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
.syntax unified
.cpu cortex-m0
.fpu softvfp
.thumb
.global g_pfnVectors
.global Default_Handler
/* start address for the initialization values of the .data section.
defined in linker script */
.word _sidata
/* start address for the .data section. defined in linker script */
.word _sdata
/* end address for the .data section. defined in linker script */
.word _edata
/* start address for the .bss section. defined in linker script */
.word _sbss
/* end address for the .bss section. defined in linker script */
.word _ebss
.section .text.Reset_Handler
.weak Reset_Handler
.type Reset_Handler, %function
Reset_Handler:
ldr r0, =_estack
mov sp, r0 /* set stack pointer */
/* Copy the data segment initializers from flash to SRAM */
movs r1, #0
b LoopCopyDataInit
CopyDataInit:
ldr r3, =_sidata
ldr r3, [r3, r1]
str r3, [r0, r1]
adds r1, r1, #4
LoopCopyDataInit:
ldr r0, =_sdata
ldr r3, =_edata
adds r2, r0, r1
cmp r2, r3
bcc CopyDataInit
ldr r2, =_sbss
b LoopFillZerobss
/* Zero fill the bss segment. */
FillZerobss:
movs r3, #0
str r3, [r2]
adds r2, r2, #4
LoopFillZerobss:
ldr r3, = _ebss
cmp r2, r3
bcc FillZerobss
/* Call the clock system intitialization function.*/
bl SystemInit
/* Call static constructors */
bl __libc_init_array
/* Call the application's entry point.*/
bl main
LoopForever:
b LoopForever
.size Reset_Handler, .-Reset_Handler
/**
* @brief This is the code that gets called when the processor receives an
* unexpected interrupt. This simply enters an infinite loop, preserving
* the system state for examination by a debugger.
*
* @param None
* @retval : None
*/
.section .text.Default_Handler,"ax",%progbits
Default_Handler:
Infinite_Loop:
b Infinite_Loop
.size Default_Handler, .-Default_Handler
/******************************************************************************
*
* The minimal vector table for a Cortex M0. Note that the proper constructs
* must be placed on this to ensure that it ends up at physical address
* 0x0000.0000.
*
******************************************************************************/
.section .isr_vector,"a",%progbits
.type g_pfnVectors, %object
.size g_pfnVectors, .-g_pfnVectors
g_pfnVectors:
.word _estack
.word Reset_Handler
.word NMI_Handler
.word HardFault_Handler
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word SVC_Handler
.word 0
.word 0
.word PendSV_Handler
.word SysTick_Handler
.word WWDG_IRQHandler /* Window WatchDog */
.word PVD_VDDIO2_IRQHandler /* PVD and VDDIO2 through EXTI Line detect */
.word RTC_IRQHandler /* RTC through the EXTI line */
.word FLASH_IRQHandler /* FLASH */
.word RCC_CRS_IRQHandler /* RCC and CRS */
.word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */
.word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */
.word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */
.word TSC_IRQHandler /* TSC */
.word DMA1_Ch1_IRQHandler /* DMA1 Channel 1 */
.word DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler /* DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2 */
.word DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler /* DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5 */
.word ADC1_COMP_IRQHandler /* ADC1, COMP1 and COMP2 */
.word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */
.word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
.word TIM2_IRQHandler /* TIM2 */
.word TIM3_IRQHandler /* TIM3 */
.word TIM6_DAC_IRQHandler /* TIM6 and DAC */
.word TIM7_IRQHandler /* TIM7 */
.word TIM14_IRQHandler /* TIM14 */
.word TIM15_IRQHandler /* TIM15 */
.word TIM16_IRQHandler /* TIM16 */
.word TIM17_IRQHandler /* TIM17 */
.word I2C1_IRQHandler /* I2C1 */
.word I2C2_IRQHandler /* I2C2 */
.word SPI1_IRQHandler /* SPI1 */
.word SPI2_IRQHandler /* SPI2 */
.word USART1_IRQHandler /* USART1 */
.word USART2_IRQHandler /* USART2 */
.word USART3_8_IRQHandler /* USART3, USART4, USART5, USART6, USART7, USART8 */
.word CEC_CAN_IRQHandler /* CEC and CAN */
/*******************************************************************************
*
* Provide weak aliases for each Exception handler to the Default_Handler.
* As they are weak aliases, any function with the same name will override
* this definition.
*
*******************************************************************************/
.weak NMI_Handler
.thumb_set NMI_Handler,Default_Handler
.weak HardFault_Handler
.thumb_set HardFault_Handler,Default_Handler
.weak SVC_Handler
.thumb_set SVC_Handler,Default_Handler
.weak PendSV_Handler
.thumb_set PendSV_Handler,Default_Handler
.weak SysTick_Handler
.thumb_set SysTick_Handler,Default_Handler
.weak WWDG_IRQHandler
.thumb_set WWDG_IRQHandler,Default_Handler
.weak PVD_VDDIO2_IRQHandler
.thumb_set PVD_VDDIO2_IRQHandler,Default_Handler
.weak RTC_IRQHandler
.thumb_set RTC_IRQHandler,Default_Handler
.weak FLASH_IRQHandler
.thumb_set FLASH_IRQHandler,Default_Handler
.weak RCC_CRS_IRQHandler
.thumb_set RCC_CRS_IRQHandler,Default_Handler
.weak EXTI0_1_IRQHandler
.thumb_set EXTI0_1_IRQHandler,Default_Handler
.weak EXTI2_3_IRQHandler
.thumb_set EXTI2_3_IRQHandler,Default_Handler
.weak EXTI4_15_IRQHandler
.thumb_set EXTI4_15_IRQHandler,Default_Handler
.weak TSC_IRQHandler
.thumb_set TSC_IRQHandler,Default_Handler
.weak DMA1_Ch1_IRQHandler
.thumb_set DMA1_Ch1_IRQHandler,Default_Handler
.weak DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
.thumb_set DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler,Default_Handler
.weak DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
.thumb_set DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler,Default_Handler
.weak ADC1_COMP_IRQHandler
.thumb_set ADC1_COMP_IRQHandler,Default_Handler
.weak TIM1_BRK_UP_TRG_COM_IRQHandler
.thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
.weak TIM1_CC_IRQHandler
.thumb_set TIM1_CC_IRQHandler,Default_Handler
.weak TIM2_IRQHandler
.thumb_set TIM2_IRQHandler,Default_Handler
.weak TIM3_IRQHandler
.thumb_set TIM3_IRQHandler,Default_Handler
.weak TIM6_DAC_IRQHandler
.thumb_set TIM6_DAC_IRQHandler,Default_Handler
.weak TIM7_IRQHandler
.thumb_set TIM7_IRQHandler,Default_Handler
.weak TIM14_IRQHandler
.thumb_set TIM14_IRQHandler,Default_Handler
.weak TIM15_IRQHandler
.thumb_set TIM15_IRQHandler,Default_Handler
.weak TIM16_IRQHandler
.thumb_set TIM16_IRQHandler,Default_Handler
.weak TIM17_IRQHandler
.thumb_set TIM17_IRQHandler,Default_Handler
.weak I2C1_IRQHandler
.thumb_set I2C1_IRQHandler,Default_Handler
.weak I2C2_IRQHandler
.thumb_set I2C2_IRQHandler,Default_Handler
.weak SPI1_IRQHandler
.thumb_set SPI1_IRQHandler,Default_Handler
.weak SPI2_IRQHandler
.thumb_set SPI2_IRQHandler,Default_Handler
.weak USART1_IRQHandler
.thumb_set USART1_IRQHandler,Default_Handler
.weak USART2_IRQHandler
.thumb_set USART2_IRQHandler,Default_Handler
.weak USART3_8_IRQHandler
.thumb_set USART3_8_IRQHandler,Default_Handler
.weak CEC_CAN_IRQHandler
.thumb_set CEC_CAN_IRQHandler,Default_Handler
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
aegean-odyssey/mpmd_marlin_1.1.x
| 11,410
|
STM32Cube-1.10.1/Projects/STM32F091RC-Nucleo/Examples/I2C/I2C_WakeUpFromStop/EWARM/startup_stm32f091xc.s
|
;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
;* File Name : startup_stm32f091xc.s
;* Author : MCD Application Team
;* Description : STM32F091xc/STM32F098xc devices vector table for EWARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == __iar_program_start,
;* - Set the vector table entries with the exceptions ISR
;* address,
;* - Branches to main in the C library (which eventually
;* calls main()).
;* After Reset the Cortex-M0 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;*******************************************************************************
;*
;* Redistribution and use in source and binary forms, with or without modification,
;* are permitted provided that the following conditions are met:
;* 1. Redistributions of source code must retain the above copyright notice,
;* this list of conditions and the following disclaimer.
;* 2. Redistributions in binary form must reproduce the above copyright notice,
;* this list of conditions and the following disclaimer in the documentation
;* and/or other materials provided with the distribution.
;* 3. Neither the name of STMicroelectronics nor the names of its contributors
;* may be used to endorse or promote products derived from this software
;* without specific prior written permission.
;*
;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
;*
;*******************************************************************************
;
;
; The modules in this file are included in the libraries, and may be replaced
; by any user-defined modules that define the PUBLIC symbol _program_start or
; a user defined start symbol.
; To override the cstartup defined in the library, simply add your modified
; version to the workbench project.
;
; The vector table is normally located at address 0.
; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
; The name "__vector_table" has special meaning for C-SPY:
; it is where the SP start value is found, and the NVIC vector
; table register (VTOR) is initialized to this address if != 0.
;
; Cortex-M version
;
MODULE ?cstartup
;; Forward declaration of sections.
SECTION CSTACK:DATA:NOROOT(3)
SECTION .intvec:CODE:NOROOT(2)
EXTERN __iar_program_start
EXTERN SystemInit
PUBLIC __vector_table
DATA
__vector_table
DCD sfe(CSTACK)
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window Watchdog
DCD PVD_VDDIO2_IRQHandler ; PVD and VDDIO2 through EXTI Line detect
DCD RTC_IRQHandler ; RTC through EXTI Line
DCD FLASH_IRQHandler ; FLASH
DCD RCC_CRS_IRQHandler ; RCC and CRS
DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
DCD TSC_IRQHandler ; TS
DCD DMA1_Ch1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler ; DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2
DCD DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler ; DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5
DCD ADC1_COMP_IRQHandler ; ADC1, COMP1 and COMP2
DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC
DCD TIM7_IRQHandler ; TIM7
DCD TIM14_IRQHandler ; TIM14
DCD TIM15_IRQHandler ; TIM15
DCD TIM16_IRQHandler ; TIM16
DCD TIM17_IRQHandler ; TIM17
DCD I2C1_IRQHandler ; I2C1
DCD I2C2_IRQHandler ; I2C2
DCD SPI1_IRQHandler ; SPI1
DCD SPI2_IRQHandler ; SPI2
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD USART3_8_IRQHandler ; USART3, USART4, USART5, USART6, USART7, USART8
DCD CEC_CAN_IRQHandler ; CEC and CAN
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Default interrupt handlers.
;;
THUMB
PUBWEAK Reset_Handler
SECTION .text:CODE:NOROOT:REORDER(2)
Reset_Handler
LDR R0, =SystemInit
BLX R0
LDR R0, =__iar_program_start
BX R0
PUBWEAK NMI_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
NMI_Handler
B NMI_Handler
PUBWEAK HardFault_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
HardFault_Handler
B HardFault_Handler
PUBWEAK SVC_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
SVC_Handler
B SVC_Handler
PUBWEAK PendSV_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
PendSV_Handler
B PendSV_Handler
PUBWEAK SysTick_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
SysTick_Handler
B SysTick_Handler
PUBWEAK WWDG_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
WWDG_IRQHandler
B WWDG_IRQHandler
PUBWEAK PVD_VDDIO2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
PVD_VDDIO2_IRQHandler
B PVD_VDDIO2_IRQHandler
PUBWEAK RTC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
RTC_IRQHandler
B RTC_IRQHandler
PUBWEAK FLASH_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
FLASH_IRQHandler
B FLASH_IRQHandler
PUBWEAK RCC_CRS_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
RCC_CRS_IRQHandler
B RCC_CRS_IRQHandler
PUBWEAK EXTI0_1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI0_1_IRQHandler
B EXTI0_1_IRQHandler
PUBWEAK EXTI2_3_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI2_3_IRQHandler
B EXTI2_3_IRQHandler
PUBWEAK EXTI4_15_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI4_15_IRQHandler
B EXTI4_15_IRQHandler
PUBWEAK TSC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TSC_IRQHandler
B TSC_IRQHandler
PUBWEAK DMA1_Ch1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Ch1_IRQHandler
B DMA1_Ch1_IRQHandler
PUBWEAK DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
B DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
PUBWEAK DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
B DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
PUBWEAK ADC1_COMP_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
ADC1_COMP_IRQHandler
B ADC1_COMP_IRQHandler
PUBWEAK TIM1_BRK_UP_TRG_COM_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM1_BRK_UP_TRG_COM_IRQHandler
B TIM1_BRK_UP_TRG_COM_IRQHandler
PUBWEAK TIM1_CC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM1_CC_IRQHandler
B TIM1_CC_IRQHandler
PUBWEAK TIM2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM2_IRQHandler
B TIM2_IRQHandler
PUBWEAK TIM3_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM3_IRQHandler
B TIM3_IRQHandler
PUBWEAK TIM6_DAC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM6_DAC_IRQHandler
B TIM6_DAC_IRQHandler
PUBWEAK TIM7_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM7_IRQHandler
B TIM7_IRQHandler
PUBWEAK TIM14_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM14_IRQHandler
B TIM14_IRQHandler
PUBWEAK TIM15_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM15_IRQHandler
B TIM15_IRQHandler
PUBWEAK TIM16_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM16_IRQHandler
B TIM16_IRQHandler
PUBWEAK TIM17_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM17_IRQHandler
B TIM17_IRQHandler
PUBWEAK I2C1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
I2C1_IRQHandler
B I2C1_IRQHandler
PUBWEAK I2C2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
I2C2_IRQHandler
B I2C2_IRQHandler
PUBWEAK SPI1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
SPI1_IRQHandler
B SPI1_IRQHandler
PUBWEAK SPI2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
SPI2_IRQHandler
B SPI2_IRQHandler
PUBWEAK USART1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
USART1_IRQHandler
B USART1_IRQHandler
PUBWEAK USART2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
USART2_IRQHandler
B USART2_IRQHandler
PUBWEAK USART3_8_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
USART3_8_IRQHandler
B USART3_8_IRQHandler
PUBWEAK CEC_CAN_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
CEC_CAN_IRQHandler
B CEC_CAN_IRQHandler
END
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
|
aegean-odyssey/mpmd_marlin_1.1.x
| 11,305
|
STM32Cube-1.10.1/Projects/STM32F091RC-Nucleo/Examples/I2C/I2C_TwoBoards_ComDMA/MDK-ARM/startup_stm32f091xc.s
|
;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
;* File Name : startup_stm32f091xc.s
;* Author : MCD Application Team
;* Description : STM32F091xc/STM32F098xc devices vector table for MDK-ARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == Reset_Handler
;* - Set the vector table entries with the exceptions ISR address
;* - Branches to __main in the C library (which eventually
;* calls main()).
;* After Reset the CortexM0 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;*******************************************************************************
;
;* Redistribution and use in source and binary forms, with or without modification,
;* are permitted provided that the following conditions are met:
;* 1. Redistributions of source code must retain the above copyright notice,
;* this list of conditions and the following disclaimer.
;* 2. Redistributions in binary form must reproduce the above copyright notice,
;* this list of conditions and the following disclaimer in the documentation
;* and/or other materials provided with the distribution.
;* 3. Neither the name of STMicroelectronics nor the names of its contributors
;* may be used to endorse or promote products derived from this software
;* without specific prior written permission.
;*
;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
;
;*******************************************************************************
; Amount of memory (in bytes) allocated for Stack
; Tailor this value to your application needs
; <h> Stack Configuration
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Stack_Size EQU 0x400;
AREA STACK, NOINIT, READWRITE, ALIGN=3
Stack_Mem SPACE Stack_Size
__initial_sp
; <h> Heap Configuration
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Heap_Size EQU 0x200;
AREA HEAP, NOINIT, READWRITE, ALIGN=3
__heap_base
Heap_Mem SPACE Heap_Size
__heap_limit
PRESERVE8
THUMB
; Vector Table Mapped to Address 0 at Reset
AREA RESET, DATA, READONLY
EXPORT __Vectors
EXPORT __Vectors_End
EXPORT __Vectors_Size
__Vectors DCD __initial_sp ; Top of Stack
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window Watchdog
DCD PVD_VDDIO2_IRQHandler ; PVD through EXTI Line detect
DCD RTC_IRQHandler ; RTC through EXTI Line
DCD FLASH_IRQHandler ; FLASH
DCD RCC_CRS_IRQHandler ; RCC and CRS
DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
DCD TSC_IRQHandler ; TS
DCD DMA1_Ch1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler ; DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2
DCD DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler ; DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5
DCD ADC1_COMP_IRQHandler ; ADC1, COMP1 and COMP2
DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC
DCD TIM7_IRQHandler ; TIM7
DCD TIM14_IRQHandler ; TIM14
DCD TIM15_IRQHandler ; TIM15
DCD TIM16_IRQHandler ; TIM16
DCD TIM17_IRQHandler ; TIM17
DCD I2C1_IRQHandler ; I2C1
DCD I2C2_IRQHandler ; I2C2
DCD SPI1_IRQHandler ; SPI1
DCD SPI2_IRQHandler ; SPI2
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD USART3_8_IRQHandler ; USART3, USART4, USART5, USART6, USART7, USART8
DCD CEC_CAN_IRQHandler ; CEC and CAN
__Vectors_End
__Vectors_Size EQU __Vectors_End - __Vectors
AREA |.text|, CODE, READONLY
; Reset handler routine
Reset_Handler PROC
EXPORT Reset_Handler [WEAK]
IMPORT __main
IMPORT SystemInit
LDR R0, =SystemInit
BLX R0
LDR R0, =__main
BX R0
ENDP
; Dummy Exception Handlers (infinite loops which can be modified)
NMI_Handler PROC
EXPORT NMI_Handler [WEAK]
B .
ENDP
HardFault_Handler\
PROC
EXPORT HardFault_Handler [WEAK]
B .
ENDP
SVC_Handler PROC
EXPORT SVC_Handler [WEAK]
B .
ENDP
PendSV_Handler PROC
EXPORT PendSV_Handler [WEAK]
B .
ENDP
SysTick_Handler PROC
EXPORT SysTick_Handler [WEAK]
B .
ENDP
Default_Handler PROC
EXPORT WWDG_IRQHandler [WEAK]
EXPORT PVD_VDDIO2_IRQHandler [WEAK]
EXPORT RTC_IRQHandler [WEAK]
EXPORT FLASH_IRQHandler [WEAK]
EXPORT RCC_CRS_IRQHandler [WEAK]
EXPORT EXTI0_1_IRQHandler [WEAK]
EXPORT EXTI2_3_IRQHandler [WEAK]
EXPORT EXTI4_15_IRQHandler [WEAK]
EXPORT TSC_IRQHandler [WEAK]
EXPORT DMA1_Ch1_IRQHandler [WEAK]
EXPORT DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler [WEAK]
EXPORT DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler [WEAK]
EXPORT ADC1_COMP_IRQHandler [WEAK]
EXPORT TIM1_BRK_UP_TRG_COM_IRQHandler [WEAK]
EXPORT TIM1_CC_IRQHandler [WEAK]
EXPORT TIM2_IRQHandler [WEAK]
EXPORT TIM3_IRQHandler [WEAK]
EXPORT TIM6_DAC_IRQHandler [WEAK]
EXPORT TIM7_IRQHandler [WEAK]
EXPORT TIM14_IRQHandler [WEAK]
EXPORT TIM15_IRQHandler [WEAK]
EXPORT TIM16_IRQHandler [WEAK]
EXPORT TIM17_IRQHandler [WEAK]
EXPORT I2C1_IRQHandler [WEAK]
EXPORT I2C2_IRQHandler [WEAK]
EXPORT SPI1_IRQHandler [WEAK]
EXPORT SPI2_IRQHandler [WEAK]
EXPORT USART1_IRQHandler [WEAK]
EXPORT USART2_IRQHandler [WEAK]
EXPORT USART3_8_IRQHandler [WEAK]
EXPORT CEC_CAN_IRQHandler [WEAK]
WWDG_IRQHandler
PVD_VDDIO2_IRQHandler
RTC_IRQHandler
FLASH_IRQHandler
RCC_CRS_IRQHandler
EXTI0_1_IRQHandler
EXTI2_3_IRQHandler
EXTI4_15_IRQHandler
TSC_IRQHandler
DMA1_Ch1_IRQHandler
DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
ADC1_COMP_IRQHandler
TIM1_BRK_UP_TRG_COM_IRQHandler
TIM1_CC_IRQHandler
TIM2_IRQHandler
TIM3_IRQHandler
TIM6_DAC_IRQHandler
TIM7_IRQHandler
TIM14_IRQHandler
TIM15_IRQHandler
TIM16_IRQHandler
TIM17_IRQHandler
I2C1_IRQHandler
I2C2_IRQHandler
SPI1_IRQHandler
SPI2_IRQHandler
USART1_IRQHandler
USART2_IRQHandler
USART3_8_IRQHandler
CEC_CAN_IRQHandler
B .
ENDP
ALIGN
;*******************************************************************************
; User Stack and Heap initialization
;*******************************************************************************
IF :DEF:__MICROLIB
EXPORT __initial_sp
EXPORT __heap_base
EXPORT __heap_limit
ELSE
IMPORT __use_two_region_memory
EXPORT __user_initial_stackheap
__user_initial_stackheap
LDR R0, = Heap_Mem
LDR R1, =(Stack_Mem + Stack_Size)
LDR R2, = (Heap_Mem + Heap_Size)
LDR R3, = Stack_Mem
BX LR
ALIGN
ENDIF
END
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
|
aegean-odyssey/mpmd_marlin_1.1.x
| 10,745
|
STM32Cube-1.10.1/Projects/STM32F091RC-Nucleo/Examples/I2C/I2C_TwoBoards_ComDMA/SW4STM32/startup_stm32f091xc.s
|
/**
******************************************************************************
* @file startup_stm32f091xc.s
* @author MCD Application Team
* @brief STM32F091xC devices vector table for GCC toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M0 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
.syntax unified
.cpu cortex-m0
.fpu softvfp
.thumb
.global g_pfnVectors
.global Default_Handler
/* start address for the initialization values of the .data section.
defined in linker script */
.word _sidata
/* start address for the .data section. defined in linker script */
.word _sdata
/* end address for the .data section. defined in linker script */
.word _edata
/* start address for the .bss section. defined in linker script */
.word _sbss
/* end address for the .bss section. defined in linker script */
.word _ebss
.section .text.Reset_Handler
.weak Reset_Handler
.type Reset_Handler, %function
Reset_Handler:
ldr r0, =_estack
mov sp, r0 /* set stack pointer */
/* Copy the data segment initializers from flash to SRAM */
movs r1, #0
b LoopCopyDataInit
CopyDataInit:
ldr r3, =_sidata
ldr r3, [r3, r1]
str r3, [r0, r1]
adds r1, r1, #4
LoopCopyDataInit:
ldr r0, =_sdata
ldr r3, =_edata
adds r2, r0, r1
cmp r2, r3
bcc CopyDataInit
ldr r2, =_sbss
b LoopFillZerobss
/* Zero fill the bss segment. */
FillZerobss:
movs r3, #0
str r3, [r2]
adds r2, r2, #4
LoopFillZerobss:
ldr r3, = _ebss
cmp r2, r3
bcc FillZerobss
/* Call the clock system intitialization function.*/
bl SystemInit
/* Call static constructors */
bl __libc_init_array
/* Call the application's entry point.*/
bl main
LoopForever:
b LoopForever
.size Reset_Handler, .-Reset_Handler
/**
* @brief This is the code that gets called when the processor receives an
* unexpected interrupt. This simply enters an infinite loop, preserving
* the system state for examination by a debugger.
*
* @param None
* @retval : None
*/
.section .text.Default_Handler,"ax",%progbits
Default_Handler:
Infinite_Loop:
b Infinite_Loop
.size Default_Handler, .-Default_Handler
/******************************************************************************
*
* The minimal vector table for a Cortex M0. Note that the proper constructs
* must be placed on this to ensure that it ends up at physical address
* 0x0000.0000.
*
******************************************************************************/
.section .isr_vector,"a",%progbits
.type g_pfnVectors, %object
.size g_pfnVectors, .-g_pfnVectors
g_pfnVectors:
.word _estack
.word Reset_Handler
.word NMI_Handler
.word HardFault_Handler
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word SVC_Handler
.word 0
.word 0
.word PendSV_Handler
.word SysTick_Handler
.word WWDG_IRQHandler /* Window WatchDog */
.word PVD_VDDIO2_IRQHandler /* PVD and VDDIO2 through EXTI Line detect */
.word RTC_IRQHandler /* RTC through the EXTI line */
.word FLASH_IRQHandler /* FLASH */
.word RCC_CRS_IRQHandler /* RCC and CRS */
.word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */
.word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */
.word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */
.word TSC_IRQHandler /* TSC */
.word DMA1_Ch1_IRQHandler /* DMA1 Channel 1 */
.word DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler /* DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2 */
.word DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler /* DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5 */
.word ADC1_COMP_IRQHandler /* ADC1, COMP1 and COMP2 */
.word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */
.word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
.word TIM2_IRQHandler /* TIM2 */
.word TIM3_IRQHandler /* TIM3 */
.word TIM6_DAC_IRQHandler /* TIM6 and DAC */
.word TIM7_IRQHandler /* TIM7 */
.word TIM14_IRQHandler /* TIM14 */
.word TIM15_IRQHandler /* TIM15 */
.word TIM16_IRQHandler /* TIM16 */
.word TIM17_IRQHandler /* TIM17 */
.word I2C1_IRQHandler /* I2C1 */
.word I2C2_IRQHandler /* I2C2 */
.word SPI1_IRQHandler /* SPI1 */
.word SPI2_IRQHandler /* SPI2 */
.word USART1_IRQHandler /* USART1 */
.word USART2_IRQHandler /* USART2 */
.word USART3_8_IRQHandler /* USART3, USART4, USART5, USART6, USART7, USART8 */
.word CEC_CAN_IRQHandler /* CEC and CAN */
/*******************************************************************************
*
* Provide weak aliases for each Exception handler to the Default_Handler.
* As they are weak aliases, any function with the same name will override
* this definition.
*
*******************************************************************************/
.weak NMI_Handler
.thumb_set NMI_Handler,Default_Handler
.weak HardFault_Handler
.thumb_set HardFault_Handler,Default_Handler
.weak SVC_Handler
.thumb_set SVC_Handler,Default_Handler
.weak PendSV_Handler
.thumb_set PendSV_Handler,Default_Handler
.weak SysTick_Handler
.thumb_set SysTick_Handler,Default_Handler
.weak WWDG_IRQHandler
.thumb_set WWDG_IRQHandler,Default_Handler
.weak PVD_VDDIO2_IRQHandler
.thumb_set PVD_VDDIO2_IRQHandler,Default_Handler
.weak RTC_IRQHandler
.thumb_set RTC_IRQHandler,Default_Handler
.weak FLASH_IRQHandler
.thumb_set FLASH_IRQHandler,Default_Handler
.weak RCC_CRS_IRQHandler
.thumb_set RCC_CRS_IRQHandler,Default_Handler
.weak EXTI0_1_IRQHandler
.thumb_set EXTI0_1_IRQHandler,Default_Handler
.weak EXTI2_3_IRQHandler
.thumb_set EXTI2_3_IRQHandler,Default_Handler
.weak EXTI4_15_IRQHandler
.thumb_set EXTI4_15_IRQHandler,Default_Handler
.weak TSC_IRQHandler
.thumb_set TSC_IRQHandler,Default_Handler
.weak DMA1_Ch1_IRQHandler
.thumb_set DMA1_Ch1_IRQHandler,Default_Handler
.weak DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
.thumb_set DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler,Default_Handler
.weak DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
.thumb_set DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler,Default_Handler
.weak ADC1_COMP_IRQHandler
.thumb_set ADC1_COMP_IRQHandler,Default_Handler
.weak TIM1_BRK_UP_TRG_COM_IRQHandler
.thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
.weak TIM1_CC_IRQHandler
.thumb_set TIM1_CC_IRQHandler,Default_Handler
.weak TIM2_IRQHandler
.thumb_set TIM2_IRQHandler,Default_Handler
.weak TIM3_IRQHandler
.thumb_set TIM3_IRQHandler,Default_Handler
.weak TIM6_DAC_IRQHandler
.thumb_set TIM6_DAC_IRQHandler,Default_Handler
.weak TIM7_IRQHandler
.thumb_set TIM7_IRQHandler,Default_Handler
.weak TIM14_IRQHandler
.thumb_set TIM14_IRQHandler,Default_Handler
.weak TIM15_IRQHandler
.thumb_set TIM15_IRQHandler,Default_Handler
.weak TIM16_IRQHandler
.thumb_set TIM16_IRQHandler,Default_Handler
.weak TIM17_IRQHandler
.thumb_set TIM17_IRQHandler,Default_Handler
.weak I2C1_IRQHandler
.thumb_set I2C1_IRQHandler,Default_Handler
.weak I2C2_IRQHandler
.thumb_set I2C2_IRQHandler,Default_Handler
.weak SPI1_IRQHandler
.thumb_set SPI1_IRQHandler,Default_Handler
.weak SPI2_IRQHandler
.thumb_set SPI2_IRQHandler,Default_Handler
.weak USART1_IRQHandler
.thumb_set USART1_IRQHandler,Default_Handler
.weak USART2_IRQHandler
.thumb_set USART2_IRQHandler,Default_Handler
.weak USART3_8_IRQHandler
.thumb_set USART3_8_IRQHandler,Default_Handler
.weak CEC_CAN_IRQHandler
.thumb_set CEC_CAN_IRQHandler,Default_Handler
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
aegean-odyssey/mpmd_marlin_1.1.x
| 11,410
|
STM32Cube-1.10.1/Projects/STM32F091RC-Nucleo/Examples/I2C/I2C_TwoBoards_ComDMA/EWARM/startup_stm32f091xc.s
|
;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
;* File Name : startup_stm32f091xc.s
;* Author : MCD Application Team
;* Description : STM32F091xc/STM32F098xc devices vector table for EWARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == __iar_program_start,
;* - Set the vector table entries with the exceptions ISR
;* address,
;* - Branches to main in the C library (which eventually
;* calls main()).
;* After Reset the Cortex-M0 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;*******************************************************************************
;*
;* Redistribution and use in source and binary forms, with or without modification,
;* are permitted provided that the following conditions are met:
;* 1. Redistributions of source code must retain the above copyright notice,
;* this list of conditions and the following disclaimer.
;* 2. Redistributions in binary form must reproduce the above copyright notice,
;* this list of conditions and the following disclaimer in the documentation
;* and/or other materials provided with the distribution.
;* 3. Neither the name of STMicroelectronics nor the names of its contributors
;* may be used to endorse or promote products derived from this software
;* without specific prior written permission.
;*
;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
;*
;*******************************************************************************
;
;
; The modules in this file are included in the libraries, and may be replaced
; by any user-defined modules that define the PUBLIC symbol _program_start or
; a user defined start symbol.
; To override the cstartup defined in the library, simply add your modified
; version to the workbench project.
;
; The vector table is normally located at address 0.
; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
; The name "__vector_table" has special meaning for C-SPY:
; it is where the SP start value is found, and the NVIC vector
; table register (VTOR) is initialized to this address if != 0.
;
; Cortex-M version
;
MODULE ?cstartup
;; Forward declaration of sections.
SECTION CSTACK:DATA:NOROOT(3)
SECTION .intvec:CODE:NOROOT(2)
EXTERN __iar_program_start
EXTERN SystemInit
PUBLIC __vector_table
DATA
__vector_table
DCD sfe(CSTACK)
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window Watchdog
DCD PVD_VDDIO2_IRQHandler ; PVD and VDDIO2 through EXTI Line detect
DCD RTC_IRQHandler ; RTC through EXTI Line
DCD FLASH_IRQHandler ; FLASH
DCD RCC_CRS_IRQHandler ; RCC and CRS
DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
DCD TSC_IRQHandler ; TS
DCD DMA1_Ch1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler ; DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2
DCD DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler ; DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5
DCD ADC1_COMP_IRQHandler ; ADC1, COMP1 and COMP2
DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC
DCD TIM7_IRQHandler ; TIM7
DCD TIM14_IRQHandler ; TIM14
DCD TIM15_IRQHandler ; TIM15
DCD TIM16_IRQHandler ; TIM16
DCD TIM17_IRQHandler ; TIM17
DCD I2C1_IRQHandler ; I2C1
DCD I2C2_IRQHandler ; I2C2
DCD SPI1_IRQHandler ; SPI1
DCD SPI2_IRQHandler ; SPI2
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD USART3_8_IRQHandler ; USART3, USART4, USART5, USART6, USART7, USART8
DCD CEC_CAN_IRQHandler ; CEC and CAN
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Default interrupt handlers.
;;
THUMB
PUBWEAK Reset_Handler
SECTION .text:CODE:NOROOT:REORDER(2)
Reset_Handler
LDR R0, =SystemInit
BLX R0
LDR R0, =__iar_program_start
BX R0
PUBWEAK NMI_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
NMI_Handler
B NMI_Handler
PUBWEAK HardFault_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
HardFault_Handler
B HardFault_Handler
PUBWEAK SVC_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
SVC_Handler
B SVC_Handler
PUBWEAK PendSV_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
PendSV_Handler
B PendSV_Handler
PUBWEAK SysTick_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
SysTick_Handler
B SysTick_Handler
PUBWEAK WWDG_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
WWDG_IRQHandler
B WWDG_IRQHandler
PUBWEAK PVD_VDDIO2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
PVD_VDDIO2_IRQHandler
B PVD_VDDIO2_IRQHandler
PUBWEAK RTC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
RTC_IRQHandler
B RTC_IRQHandler
PUBWEAK FLASH_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
FLASH_IRQHandler
B FLASH_IRQHandler
PUBWEAK RCC_CRS_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
RCC_CRS_IRQHandler
B RCC_CRS_IRQHandler
PUBWEAK EXTI0_1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI0_1_IRQHandler
B EXTI0_1_IRQHandler
PUBWEAK EXTI2_3_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI2_3_IRQHandler
B EXTI2_3_IRQHandler
PUBWEAK EXTI4_15_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI4_15_IRQHandler
B EXTI4_15_IRQHandler
PUBWEAK TSC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TSC_IRQHandler
B TSC_IRQHandler
PUBWEAK DMA1_Ch1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Ch1_IRQHandler
B DMA1_Ch1_IRQHandler
PUBWEAK DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
B DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
PUBWEAK DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
B DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
PUBWEAK ADC1_COMP_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
ADC1_COMP_IRQHandler
B ADC1_COMP_IRQHandler
PUBWEAK TIM1_BRK_UP_TRG_COM_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM1_BRK_UP_TRG_COM_IRQHandler
B TIM1_BRK_UP_TRG_COM_IRQHandler
PUBWEAK TIM1_CC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM1_CC_IRQHandler
B TIM1_CC_IRQHandler
PUBWEAK TIM2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM2_IRQHandler
B TIM2_IRQHandler
PUBWEAK TIM3_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM3_IRQHandler
B TIM3_IRQHandler
PUBWEAK TIM6_DAC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM6_DAC_IRQHandler
B TIM6_DAC_IRQHandler
PUBWEAK TIM7_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM7_IRQHandler
B TIM7_IRQHandler
PUBWEAK TIM14_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM14_IRQHandler
B TIM14_IRQHandler
PUBWEAK TIM15_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM15_IRQHandler
B TIM15_IRQHandler
PUBWEAK TIM16_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM16_IRQHandler
B TIM16_IRQHandler
PUBWEAK TIM17_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM17_IRQHandler
B TIM17_IRQHandler
PUBWEAK I2C1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
I2C1_IRQHandler
B I2C1_IRQHandler
PUBWEAK I2C2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
I2C2_IRQHandler
B I2C2_IRQHandler
PUBWEAK SPI1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
SPI1_IRQHandler
B SPI1_IRQHandler
PUBWEAK SPI2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
SPI2_IRQHandler
B SPI2_IRQHandler
PUBWEAK USART1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
USART1_IRQHandler
B USART1_IRQHandler
PUBWEAK USART2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
USART2_IRQHandler
B USART2_IRQHandler
PUBWEAK USART3_8_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
USART3_8_IRQHandler
B USART3_8_IRQHandler
PUBWEAK CEC_CAN_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
CEC_CAN_IRQHandler
B CEC_CAN_IRQHandler
END
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
|
aegean-odyssey/mpmd_marlin_1.1.x
| 11,305
|
STM32Cube-1.10.1/Projects/STM32F091RC-Nucleo/Examples/I2C/I2C_TwoBoards_ComIT/MDK-ARM/startup_stm32f091xc.s
|
;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
;* File Name : startup_stm32f091xc.s
;* Author : MCD Application Team
;* Description : STM32F091xc/STM32F098xc devices vector table for MDK-ARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == Reset_Handler
;* - Set the vector table entries with the exceptions ISR address
;* - Branches to __main in the C library (which eventually
;* calls main()).
;* After Reset the CortexM0 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;*******************************************************************************
;
;* Redistribution and use in source and binary forms, with or without modification,
;* are permitted provided that the following conditions are met:
;* 1. Redistributions of source code must retain the above copyright notice,
;* this list of conditions and the following disclaimer.
;* 2. Redistributions in binary form must reproduce the above copyright notice,
;* this list of conditions and the following disclaimer in the documentation
;* and/or other materials provided with the distribution.
;* 3. Neither the name of STMicroelectronics nor the names of its contributors
;* may be used to endorse or promote products derived from this software
;* without specific prior written permission.
;*
;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
;
;*******************************************************************************
; Amount of memory (in bytes) allocated for Stack
; Tailor this value to your application needs
; <h> Stack Configuration
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Stack_Size EQU 0x400;
AREA STACK, NOINIT, READWRITE, ALIGN=3
Stack_Mem SPACE Stack_Size
__initial_sp
; <h> Heap Configuration
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Heap_Size EQU 0x200;
AREA HEAP, NOINIT, READWRITE, ALIGN=3
__heap_base
Heap_Mem SPACE Heap_Size
__heap_limit
PRESERVE8
THUMB
; Vector Table Mapped to Address 0 at Reset
AREA RESET, DATA, READONLY
EXPORT __Vectors
EXPORT __Vectors_End
EXPORT __Vectors_Size
__Vectors DCD __initial_sp ; Top of Stack
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window Watchdog
DCD PVD_VDDIO2_IRQHandler ; PVD through EXTI Line detect
DCD RTC_IRQHandler ; RTC through EXTI Line
DCD FLASH_IRQHandler ; FLASH
DCD RCC_CRS_IRQHandler ; RCC and CRS
DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
DCD TSC_IRQHandler ; TS
DCD DMA1_Ch1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler ; DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2
DCD DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler ; DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5
DCD ADC1_COMP_IRQHandler ; ADC1, COMP1 and COMP2
DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC
DCD TIM7_IRQHandler ; TIM7
DCD TIM14_IRQHandler ; TIM14
DCD TIM15_IRQHandler ; TIM15
DCD TIM16_IRQHandler ; TIM16
DCD TIM17_IRQHandler ; TIM17
DCD I2C1_IRQHandler ; I2C1
DCD I2C2_IRQHandler ; I2C2
DCD SPI1_IRQHandler ; SPI1
DCD SPI2_IRQHandler ; SPI2
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD USART3_8_IRQHandler ; USART3, USART4, USART5, USART6, USART7, USART8
DCD CEC_CAN_IRQHandler ; CEC and CAN
__Vectors_End
__Vectors_Size EQU __Vectors_End - __Vectors
AREA |.text|, CODE, READONLY
; Reset handler routine
Reset_Handler PROC
EXPORT Reset_Handler [WEAK]
IMPORT __main
IMPORT SystemInit
LDR R0, =SystemInit
BLX R0
LDR R0, =__main
BX R0
ENDP
; Dummy Exception Handlers (infinite loops which can be modified)
NMI_Handler PROC
EXPORT NMI_Handler [WEAK]
B .
ENDP
HardFault_Handler\
PROC
EXPORT HardFault_Handler [WEAK]
B .
ENDP
SVC_Handler PROC
EXPORT SVC_Handler [WEAK]
B .
ENDP
PendSV_Handler PROC
EXPORT PendSV_Handler [WEAK]
B .
ENDP
SysTick_Handler PROC
EXPORT SysTick_Handler [WEAK]
B .
ENDP
Default_Handler PROC
EXPORT WWDG_IRQHandler [WEAK]
EXPORT PVD_VDDIO2_IRQHandler [WEAK]
EXPORT RTC_IRQHandler [WEAK]
EXPORT FLASH_IRQHandler [WEAK]
EXPORT RCC_CRS_IRQHandler [WEAK]
EXPORT EXTI0_1_IRQHandler [WEAK]
EXPORT EXTI2_3_IRQHandler [WEAK]
EXPORT EXTI4_15_IRQHandler [WEAK]
EXPORT TSC_IRQHandler [WEAK]
EXPORT DMA1_Ch1_IRQHandler [WEAK]
EXPORT DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler [WEAK]
EXPORT DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler [WEAK]
EXPORT ADC1_COMP_IRQHandler [WEAK]
EXPORT TIM1_BRK_UP_TRG_COM_IRQHandler [WEAK]
EXPORT TIM1_CC_IRQHandler [WEAK]
EXPORT TIM2_IRQHandler [WEAK]
EXPORT TIM3_IRQHandler [WEAK]
EXPORT TIM6_DAC_IRQHandler [WEAK]
EXPORT TIM7_IRQHandler [WEAK]
EXPORT TIM14_IRQHandler [WEAK]
EXPORT TIM15_IRQHandler [WEAK]
EXPORT TIM16_IRQHandler [WEAK]
EXPORT TIM17_IRQHandler [WEAK]
EXPORT I2C1_IRQHandler [WEAK]
EXPORT I2C2_IRQHandler [WEAK]
EXPORT SPI1_IRQHandler [WEAK]
EXPORT SPI2_IRQHandler [WEAK]
EXPORT USART1_IRQHandler [WEAK]
EXPORT USART2_IRQHandler [WEAK]
EXPORT USART3_8_IRQHandler [WEAK]
EXPORT CEC_CAN_IRQHandler [WEAK]
WWDG_IRQHandler
PVD_VDDIO2_IRQHandler
RTC_IRQHandler
FLASH_IRQHandler
RCC_CRS_IRQHandler
EXTI0_1_IRQHandler
EXTI2_3_IRQHandler
EXTI4_15_IRQHandler
TSC_IRQHandler
DMA1_Ch1_IRQHandler
DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
ADC1_COMP_IRQHandler
TIM1_BRK_UP_TRG_COM_IRQHandler
TIM1_CC_IRQHandler
TIM2_IRQHandler
TIM3_IRQHandler
TIM6_DAC_IRQHandler
TIM7_IRQHandler
TIM14_IRQHandler
TIM15_IRQHandler
TIM16_IRQHandler
TIM17_IRQHandler
I2C1_IRQHandler
I2C2_IRQHandler
SPI1_IRQHandler
SPI2_IRQHandler
USART1_IRQHandler
USART2_IRQHandler
USART3_8_IRQHandler
CEC_CAN_IRQHandler
B .
ENDP
ALIGN
;*******************************************************************************
; User Stack and Heap initialization
;*******************************************************************************
IF :DEF:__MICROLIB
EXPORT __initial_sp
EXPORT __heap_base
EXPORT __heap_limit
ELSE
IMPORT __use_two_region_memory
EXPORT __user_initial_stackheap
__user_initial_stackheap
LDR R0, = Heap_Mem
LDR R1, =(Stack_Mem + Stack_Size)
LDR R2, = (Heap_Mem + Heap_Size)
LDR R3, = Stack_Mem
BX LR
ALIGN
ENDIF
END
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
|
aegean-odyssey/mpmd_marlin_1.1.x
| 10,745
|
STM32Cube-1.10.1/Projects/STM32F091RC-Nucleo/Examples/I2C/I2C_TwoBoards_ComIT/SW4STM32/startup_stm32f091xc.s
|
/**
******************************************************************************
* @file startup_stm32f091xc.s
* @author MCD Application Team
* @brief STM32F091xC devices vector table for GCC toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M0 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
.syntax unified
.cpu cortex-m0
.fpu softvfp
.thumb
.global g_pfnVectors
.global Default_Handler
/* start address for the initialization values of the .data section.
defined in linker script */
.word _sidata
/* start address for the .data section. defined in linker script */
.word _sdata
/* end address for the .data section. defined in linker script */
.word _edata
/* start address for the .bss section. defined in linker script */
.word _sbss
/* end address for the .bss section. defined in linker script */
.word _ebss
.section .text.Reset_Handler
.weak Reset_Handler
.type Reset_Handler, %function
Reset_Handler:
ldr r0, =_estack
mov sp, r0 /* set stack pointer */
/* Copy the data segment initializers from flash to SRAM */
movs r1, #0
b LoopCopyDataInit
CopyDataInit:
ldr r3, =_sidata
ldr r3, [r3, r1]
str r3, [r0, r1]
adds r1, r1, #4
LoopCopyDataInit:
ldr r0, =_sdata
ldr r3, =_edata
adds r2, r0, r1
cmp r2, r3
bcc CopyDataInit
ldr r2, =_sbss
b LoopFillZerobss
/* Zero fill the bss segment. */
FillZerobss:
movs r3, #0
str r3, [r2]
adds r2, r2, #4
LoopFillZerobss:
ldr r3, = _ebss
cmp r2, r3
bcc FillZerobss
/* Call the clock system intitialization function.*/
bl SystemInit
/* Call static constructors */
bl __libc_init_array
/* Call the application's entry point.*/
bl main
LoopForever:
b LoopForever
.size Reset_Handler, .-Reset_Handler
/**
* @brief This is the code that gets called when the processor receives an
* unexpected interrupt. This simply enters an infinite loop, preserving
* the system state for examination by a debugger.
*
* @param None
* @retval : None
*/
.section .text.Default_Handler,"ax",%progbits
Default_Handler:
Infinite_Loop:
b Infinite_Loop
.size Default_Handler, .-Default_Handler
/******************************************************************************
*
* The minimal vector table for a Cortex M0. Note that the proper constructs
* must be placed on this to ensure that it ends up at physical address
* 0x0000.0000.
*
******************************************************************************/
.section .isr_vector,"a",%progbits
.type g_pfnVectors, %object
.size g_pfnVectors, .-g_pfnVectors
g_pfnVectors:
.word _estack
.word Reset_Handler
.word NMI_Handler
.word HardFault_Handler
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word SVC_Handler
.word 0
.word 0
.word PendSV_Handler
.word SysTick_Handler
.word WWDG_IRQHandler /* Window WatchDog */
.word PVD_VDDIO2_IRQHandler /* PVD and VDDIO2 through EXTI Line detect */
.word RTC_IRQHandler /* RTC through the EXTI line */
.word FLASH_IRQHandler /* FLASH */
.word RCC_CRS_IRQHandler /* RCC and CRS */
.word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */
.word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */
.word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */
.word TSC_IRQHandler /* TSC */
.word DMA1_Ch1_IRQHandler /* DMA1 Channel 1 */
.word DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler /* DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2 */
.word DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler /* DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5 */
.word ADC1_COMP_IRQHandler /* ADC1, COMP1 and COMP2 */
.word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */
.word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
.word TIM2_IRQHandler /* TIM2 */
.word TIM3_IRQHandler /* TIM3 */
.word TIM6_DAC_IRQHandler /* TIM6 and DAC */
.word TIM7_IRQHandler /* TIM7 */
.word TIM14_IRQHandler /* TIM14 */
.word TIM15_IRQHandler /* TIM15 */
.word TIM16_IRQHandler /* TIM16 */
.word TIM17_IRQHandler /* TIM17 */
.word I2C1_IRQHandler /* I2C1 */
.word I2C2_IRQHandler /* I2C2 */
.word SPI1_IRQHandler /* SPI1 */
.word SPI2_IRQHandler /* SPI2 */
.word USART1_IRQHandler /* USART1 */
.word USART2_IRQHandler /* USART2 */
.word USART3_8_IRQHandler /* USART3, USART4, USART5, USART6, USART7, USART8 */
.word CEC_CAN_IRQHandler /* CEC and CAN */
/*******************************************************************************
*
* Provide weak aliases for each Exception handler to the Default_Handler.
* As they are weak aliases, any function with the same name will override
* this definition.
*
*******************************************************************************/
.weak NMI_Handler
.thumb_set NMI_Handler,Default_Handler
.weak HardFault_Handler
.thumb_set HardFault_Handler,Default_Handler
.weak SVC_Handler
.thumb_set SVC_Handler,Default_Handler
.weak PendSV_Handler
.thumb_set PendSV_Handler,Default_Handler
.weak SysTick_Handler
.thumb_set SysTick_Handler,Default_Handler
.weak WWDG_IRQHandler
.thumb_set WWDG_IRQHandler,Default_Handler
.weak PVD_VDDIO2_IRQHandler
.thumb_set PVD_VDDIO2_IRQHandler,Default_Handler
.weak RTC_IRQHandler
.thumb_set RTC_IRQHandler,Default_Handler
.weak FLASH_IRQHandler
.thumb_set FLASH_IRQHandler,Default_Handler
.weak RCC_CRS_IRQHandler
.thumb_set RCC_CRS_IRQHandler,Default_Handler
.weak EXTI0_1_IRQHandler
.thumb_set EXTI0_1_IRQHandler,Default_Handler
.weak EXTI2_3_IRQHandler
.thumb_set EXTI2_3_IRQHandler,Default_Handler
.weak EXTI4_15_IRQHandler
.thumb_set EXTI4_15_IRQHandler,Default_Handler
.weak TSC_IRQHandler
.thumb_set TSC_IRQHandler,Default_Handler
.weak DMA1_Ch1_IRQHandler
.thumb_set DMA1_Ch1_IRQHandler,Default_Handler
.weak DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
.thumb_set DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler,Default_Handler
.weak DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
.thumb_set DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler,Default_Handler
.weak ADC1_COMP_IRQHandler
.thumb_set ADC1_COMP_IRQHandler,Default_Handler
.weak TIM1_BRK_UP_TRG_COM_IRQHandler
.thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
.weak TIM1_CC_IRQHandler
.thumb_set TIM1_CC_IRQHandler,Default_Handler
.weak TIM2_IRQHandler
.thumb_set TIM2_IRQHandler,Default_Handler
.weak TIM3_IRQHandler
.thumb_set TIM3_IRQHandler,Default_Handler
.weak TIM6_DAC_IRQHandler
.thumb_set TIM6_DAC_IRQHandler,Default_Handler
.weak TIM7_IRQHandler
.thumb_set TIM7_IRQHandler,Default_Handler
.weak TIM14_IRQHandler
.thumb_set TIM14_IRQHandler,Default_Handler
.weak TIM15_IRQHandler
.thumb_set TIM15_IRQHandler,Default_Handler
.weak TIM16_IRQHandler
.thumb_set TIM16_IRQHandler,Default_Handler
.weak TIM17_IRQHandler
.thumb_set TIM17_IRQHandler,Default_Handler
.weak I2C1_IRQHandler
.thumb_set I2C1_IRQHandler,Default_Handler
.weak I2C2_IRQHandler
.thumb_set I2C2_IRQHandler,Default_Handler
.weak SPI1_IRQHandler
.thumb_set SPI1_IRQHandler,Default_Handler
.weak SPI2_IRQHandler
.thumb_set SPI2_IRQHandler,Default_Handler
.weak USART1_IRQHandler
.thumb_set USART1_IRQHandler,Default_Handler
.weak USART2_IRQHandler
.thumb_set USART2_IRQHandler,Default_Handler
.weak USART3_8_IRQHandler
.thumb_set USART3_8_IRQHandler,Default_Handler
.weak CEC_CAN_IRQHandler
.thumb_set CEC_CAN_IRQHandler,Default_Handler
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
aegean-odyssey/mpmd_marlin_1.1.x
| 11,410
|
STM32Cube-1.10.1/Projects/STM32F091RC-Nucleo/Examples/I2C/I2C_TwoBoards_ComIT/EWARM/startup_stm32f091xc.s
|
;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
;* File Name : startup_stm32f091xc.s
;* Author : MCD Application Team
;* Description : STM32F091xc/STM32F098xc devices vector table for EWARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == __iar_program_start,
;* - Set the vector table entries with the exceptions ISR
;* address,
;* - Branches to main in the C library (which eventually
;* calls main()).
;* After Reset the Cortex-M0 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;*******************************************************************************
;*
;* Redistribution and use in source and binary forms, with or without modification,
;* are permitted provided that the following conditions are met:
;* 1. Redistributions of source code must retain the above copyright notice,
;* this list of conditions and the following disclaimer.
;* 2. Redistributions in binary form must reproduce the above copyright notice,
;* this list of conditions and the following disclaimer in the documentation
;* and/or other materials provided with the distribution.
;* 3. Neither the name of STMicroelectronics nor the names of its contributors
;* may be used to endorse or promote products derived from this software
;* without specific prior written permission.
;*
;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
;*
;*******************************************************************************
;
;
; The modules in this file are included in the libraries, and may be replaced
; by any user-defined modules that define the PUBLIC symbol _program_start or
; a user defined start symbol.
; To override the cstartup defined in the library, simply add your modified
; version to the workbench project.
;
; The vector table is normally located at address 0.
; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
; The name "__vector_table" has special meaning for C-SPY:
; it is where the SP start value is found, and the NVIC vector
; table register (VTOR) is initialized to this address if != 0.
;
; Cortex-M version
;
MODULE ?cstartup
;; Forward declaration of sections.
SECTION CSTACK:DATA:NOROOT(3)
SECTION .intvec:CODE:NOROOT(2)
EXTERN __iar_program_start
EXTERN SystemInit
PUBLIC __vector_table
DATA
__vector_table
DCD sfe(CSTACK)
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window Watchdog
DCD PVD_VDDIO2_IRQHandler ; PVD and VDDIO2 through EXTI Line detect
DCD RTC_IRQHandler ; RTC through EXTI Line
DCD FLASH_IRQHandler ; FLASH
DCD RCC_CRS_IRQHandler ; RCC and CRS
DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
DCD TSC_IRQHandler ; TS
DCD DMA1_Ch1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler ; DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2
DCD DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler ; DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5
DCD ADC1_COMP_IRQHandler ; ADC1, COMP1 and COMP2
DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC
DCD TIM7_IRQHandler ; TIM7
DCD TIM14_IRQHandler ; TIM14
DCD TIM15_IRQHandler ; TIM15
DCD TIM16_IRQHandler ; TIM16
DCD TIM17_IRQHandler ; TIM17
DCD I2C1_IRQHandler ; I2C1
DCD I2C2_IRQHandler ; I2C2
DCD SPI1_IRQHandler ; SPI1
DCD SPI2_IRQHandler ; SPI2
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD USART3_8_IRQHandler ; USART3, USART4, USART5, USART6, USART7, USART8
DCD CEC_CAN_IRQHandler ; CEC and CAN
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Default interrupt handlers.
;;
THUMB
PUBWEAK Reset_Handler
SECTION .text:CODE:NOROOT:REORDER(2)
Reset_Handler
LDR R0, =SystemInit
BLX R0
LDR R0, =__iar_program_start
BX R0
PUBWEAK NMI_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
NMI_Handler
B NMI_Handler
PUBWEAK HardFault_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
HardFault_Handler
B HardFault_Handler
PUBWEAK SVC_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
SVC_Handler
B SVC_Handler
PUBWEAK PendSV_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
PendSV_Handler
B PendSV_Handler
PUBWEAK SysTick_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
SysTick_Handler
B SysTick_Handler
PUBWEAK WWDG_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
WWDG_IRQHandler
B WWDG_IRQHandler
PUBWEAK PVD_VDDIO2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
PVD_VDDIO2_IRQHandler
B PVD_VDDIO2_IRQHandler
PUBWEAK RTC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
RTC_IRQHandler
B RTC_IRQHandler
PUBWEAK FLASH_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
FLASH_IRQHandler
B FLASH_IRQHandler
PUBWEAK RCC_CRS_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
RCC_CRS_IRQHandler
B RCC_CRS_IRQHandler
PUBWEAK EXTI0_1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI0_1_IRQHandler
B EXTI0_1_IRQHandler
PUBWEAK EXTI2_3_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI2_3_IRQHandler
B EXTI2_3_IRQHandler
PUBWEAK EXTI4_15_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI4_15_IRQHandler
B EXTI4_15_IRQHandler
PUBWEAK TSC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TSC_IRQHandler
B TSC_IRQHandler
PUBWEAK DMA1_Ch1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Ch1_IRQHandler
B DMA1_Ch1_IRQHandler
PUBWEAK DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
B DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
PUBWEAK DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
B DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
PUBWEAK ADC1_COMP_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
ADC1_COMP_IRQHandler
B ADC1_COMP_IRQHandler
PUBWEAK TIM1_BRK_UP_TRG_COM_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM1_BRK_UP_TRG_COM_IRQHandler
B TIM1_BRK_UP_TRG_COM_IRQHandler
PUBWEAK TIM1_CC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM1_CC_IRQHandler
B TIM1_CC_IRQHandler
PUBWEAK TIM2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM2_IRQHandler
B TIM2_IRQHandler
PUBWEAK TIM3_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM3_IRQHandler
B TIM3_IRQHandler
PUBWEAK TIM6_DAC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM6_DAC_IRQHandler
B TIM6_DAC_IRQHandler
PUBWEAK TIM7_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM7_IRQHandler
B TIM7_IRQHandler
PUBWEAK TIM14_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM14_IRQHandler
B TIM14_IRQHandler
PUBWEAK TIM15_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM15_IRQHandler
B TIM15_IRQHandler
PUBWEAK TIM16_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM16_IRQHandler
B TIM16_IRQHandler
PUBWEAK TIM17_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM17_IRQHandler
B TIM17_IRQHandler
PUBWEAK I2C1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
I2C1_IRQHandler
B I2C1_IRQHandler
PUBWEAK I2C2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
I2C2_IRQHandler
B I2C2_IRQHandler
PUBWEAK SPI1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
SPI1_IRQHandler
B SPI1_IRQHandler
PUBWEAK SPI2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
SPI2_IRQHandler
B SPI2_IRQHandler
PUBWEAK USART1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
USART1_IRQHandler
B USART1_IRQHandler
PUBWEAK USART2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
USART2_IRQHandler
B USART2_IRQHandler
PUBWEAK USART3_8_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
USART3_8_IRQHandler
B USART3_8_IRQHandler
PUBWEAK CEC_CAN_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
CEC_CAN_IRQHandler
B CEC_CAN_IRQHandler
END
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
|
aegean-odyssey/mpmd_marlin_1.1.x
| 11,305
|
STM32Cube-1.10.1/Projects/STM32F091RC-Nucleo/Examples/COMP/COMP_Interrupt/MDK-ARM/startup_stm32f091xc.s
|
;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
;* File Name : startup_stm32f091xc.s
;* Author : MCD Application Team
;* Description : STM32F091xc/STM32F098xc devices vector table for MDK-ARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == Reset_Handler
;* - Set the vector table entries with the exceptions ISR address
;* - Branches to __main in the C library (which eventually
;* calls main()).
;* After Reset the CortexM0 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;*******************************************************************************
;
;* Redistribution and use in source and binary forms, with or without modification,
;* are permitted provided that the following conditions are met:
;* 1. Redistributions of source code must retain the above copyright notice,
;* this list of conditions and the following disclaimer.
;* 2. Redistributions in binary form must reproduce the above copyright notice,
;* this list of conditions and the following disclaimer in the documentation
;* and/or other materials provided with the distribution.
;* 3. Neither the name of STMicroelectronics nor the names of its contributors
;* may be used to endorse or promote products derived from this software
;* without specific prior written permission.
;*
;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
;
;*******************************************************************************
; Amount of memory (in bytes) allocated for Stack
; Tailor this value to your application needs
; <h> Stack Configuration
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Stack_Size EQU 0x400;
AREA STACK, NOINIT, READWRITE, ALIGN=3
Stack_Mem SPACE Stack_Size
__initial_sp
; <h> Heap Configuration
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Heap_Size EQU 0x200;
AREA HEAP, NOINIT, READWRITE, ALIGN=3
__heap_base
Heap_Mem SPACE Heap_Size
__heap_limit
PRESERVE8
THUMB
; Vector Table Mapped to Address 0 at Reset
AREA RESET, DATA, READONLY
EXPORT __Vectors
EXPORT __Vectors_End
EXPORT __Vectors_Size
__Vectors DCD __initial_sp ; Top of Stack
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window Watchdog
DCD PVD_VDDIO2_IRQHandler ; PVD through EXTI Line detect
DCD RTC_IRQHandler ; RTC through EXTI Line
DCD FLASH_IRQHandler ; FLASH
DCD RCC_CRS_IRQHandler ; RCC and CRS
DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
DCD TSC_IRQHandler ; TS
DCD DMA1_Ch1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler ; DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2
DCD DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler ; DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5
DCD ADC1_COMP_IRQHandler ; ADC1, COMP1 and COMP2
DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC
DCD TIM7_IRQHandler ; TIM7
DCD TIM14_IRQHandler ; TIM14
DCD TIM15_IRQHandler ; TIM15
DCD TIM16_IRQHandler ; TIM16
DCD TIM17_IRQHandler ; TIM17
DCD I2C1_IRQHandler ; I2C1
DCD I2C2_IRQHandler ; I2C2
DCD SPI1_IRQHandler ; SPI1
DCD SPI2_IRQHandler ; SPI2
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD USART3_8_IRQHandler ; USART3, USART4, USART5, USART6, USART7, USART8
DCD CEC_CAN_IRQHandler ; CEC and CAN
__Vectors_End
__Vectors_Size EQU __Vectors_End - __Vectors
AREA |.text|, CODE, READONLY
; Reset handler routine
Reset_Handler PROC
EXPORT Reset_Handler [WEAK]
IMPORT __main
IMPORT SystemInit
LDR R0, =SystemInit
BLX R0
LDR R0, =__main
BX R0
ENDP
; Dummy Exception Handlers (infinite loops which can be modified)
NMI_Handler PROC
EXPORT NMI_Handler [WEAK]
B .
ENDP
HardFault_Handler\
PROC
EXPORT HardFault_Handler [WEAK]
B .
ENDP
SVC_Handler PROC
EXPORT SVC_Handler [WEAK]
B .
ENDP
PendSV_Handler PROC
EXPORT PendSV_Handler [WEAK]
B .
ENDP
SysTick_Handler PROC
EXPORT SysTick_Handler [WEAK]
B .
ENDP
Default_Handler PROC
EXPORT WWDG_IRQHandler [WEAK]
EXPORT PVD_VDDIO2_IRQHandler [WEAK]
EXPORT RTC_IRQHandler [WEAK]
EXPORT FLASH_IRQHandler [WEAK]
EXPORT RCC_CRS_IRQHandler [WEAK]
EXPORT EXTI0_1_IRQHandler [WEAK]
EXPORT EXTI2_3_IRQHandler [WEAK]
EXPORT EXTI4_15_IRQHandler [WEAK]
EXPORT TSC_IRQHandler [WEAK]
EXPORT DMA1_Ch1_IRQHandler [WEAK]
EXPORT DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler [WEAK]
EXPORT DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler [WEAK]
EXPORT ADC1_COMP_IRQHandler [WEAK]
EXPORT TIM1_BRK_UP_TRG_COM_IRQHandler [WEAK]
EXPORT TIM1_CC_IRQHandler [WEAK]
EXPORT TIM2_IRQHandler [WEAK]
EXPORT TIM3_IRQHandler [WEAK]
EXPORT TIM6_DAC_IRQHandler [WEAK]
EXPORT TIM7_IRQHandler [WEAK]
EXPORT TIM14_IRQHandler [WEAK]
EXPORT TIM15_IRQHandler [WEAK]
EXPORT TIM16_IRQHandler [WEAK]
EXPORT TIM17_IRQHandler [WEAK]
EXPORT I2C1_IRQHandler [WEAK]
EXPORT I2C2_IRQHandler [WEAK]
EXPORT SPI1_IRQHandler [WEAK]
EXPORT SPI2_IRQHandler [WEAK]
EXPORT USART1_IRQHandler [WEAK]
EXPORT USART2_IRQHandler [WEAK]
EXPORT USART3_8_IRQHandler [WEAK]
EXPORT CEC_CAN_IRQHandler [WEAK]
WWDG_IRQHandler
PVD_VDDIO2_IRQHandler
RTC_IRQHandler
FLASH_IRQHandler
RCC_CRS_IRQHandler
EXTI0_1_IRQHandler
EXTI2_3_IRQHandler
EXTI4_15_IRQHandler
TSC_IRQHandler
DMA1_Ch1_IRQHandler
DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
ADC1_COMP_IRQHandler
TIM1_BRK_UP_TRG_COM_IRQHandler
TIM1_CC_IRQHandler
TIM2_IRQHandler
TIM3_IRQHandler
TIM6_DAC_IRQHandler
TIM7_IRQHandler
TIM14_IRQHandler
TIM15_IRQHandler
TIM16_IRQHandler
TIM17_IRQHandler
I2C1_IRQHandler
I2C2_IRQHandler
SPI1_IRQHandler
SPI2_IRQHandler
USART1_IRQHandler
USART2_IRQHandler
USART3_8_IRQHandler
CEC_CAN_IRQHandler
B .
ENDP
ALIGN
;*******************************************************************************
; User Stack and Heap initialization
;*******************************************************************************
IF :DEF:__MICROLIB
EXPORT __initial_sp
EXPORT __heap_base
EXPORT __heap_limit
ELSE
IMPORT __use_two_region_memory
EXPORT __user_initial_stackheap
__user_initial_stackheap
LDR R0, = Heap_Mem
LDR R1, =(Stack_Mem + Stack_Size)
LDR R2, = (Heap_Mem + Heap_Size)
LDR R3, = Stack_Mem
BX LR
ALIGN
ENDIF
END
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
|
aegean-odyssey/mpmd_marlin_1.1.x
| 10,745
|
STM32Cube-1.10.1/Projects/STM32F091RC-Nucleo/Examples/COMP/COMP_Interrupt/SW4STM32/startup_stm32f091xc.s
|
/**
******************************************************************************
* @file startup_stm32f091xc.s
* @author MCD Application Team
* @brief STM32F091xC devices vector table for GCC toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M0 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
.syntax unified
.cpu cortex-m0
.fpu softvfp
.thumb
.global g_pfnVectors
.global Default_Handler
/* start address for the initialization values of the .data section.
defined in linker script */
.word _sidata
/* start address for the .data section. defined in linker script */
.word _sdata
/* end address for the .data section. defined in linker script */
.word _edata
/* start address for the .bss section. defined in linker script */
.word _sbss
/* end address for the .bss section. defined in linker script */
.word _ebss
.section .text.Reset_Handler
.weak Reset_Handler
.type Reset_Handler, %function
Reset_Handler:
ldr r0, =_estack
mov sp, r0 /* set stack pointer */
/* Copy the data segment initializers from flash to SRAM */
movs r1, #0
b LoopCopyDataInit
CopyDataInit:
ldr r3, =_sidata
ldr r3, [r3, r1]
str r3, [r0, r1]
adds r1, r1, #4
LoopCopyDataInit:
ldr r0, =_sdata
ldr r3, =_edata
adds r2, r0, r1
cmp r2, r3
bcc CopyDataInit
ldr r2, =_sbss
b LoopFillZerobss
/* Zero fill the bss segment. */
FillZerobss:
movs r3, #0
str r3, [r2]
adds r2, r2, #4
LoopFillZerobss:
ldr r3, = _ebss
cmp r2, r3
bcc FillZerobss
/* Call the clock system intitialization function.*/
bl SystemInit
/* Call static constructors */
bl __libc_init_array
/* Call the application's entry point.*/
bl main
LoopForever:
b LoopForever
.size Reset_Handler, .-Reset_Handler
/**
* @brief This is the code that gets called when the processor receives an
* unexpected interrupt. This simply enters an infinite loop, preserving
* the system state for examination by a debugger.
*
* @param None
* @retval : None
*/
.section .text.Default_Handler,"ax",%progbits
Default_Handler:
Infinite_Loop:
b Infinite_Loop
.size Default_Handler, .-Default_Handler
/******************************************************************************
*
* The minimal vector table for a Cortex M0. Note that the proper constructs
* must be placed on this to ensure that it ends up at physical address
* 0x0000.0000.
*
******************************************************************************/
.section .isr_vector,"a",%progbits
.type g_pfnVectors, %object
.size g_pfnVectors, .-g_pfnVectors
g_pfnVectors:
.word _estack
.word Reset_Handler
.word NMI_Handler
.word HardFault_Handler
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word SVC_Handler
.word 0
.word 0
.word PendSV_Handler
.word SysTick_Handler
.word WWDG_IRQHandler /* Window WatchDog */
.word PVD_VDDIO2_IRQHandler /* PVD and VDDIO2 through EXTI Line detect */
.word RTC_IRQHandler /* RTC through the EXTI line */
.word FLASH_IRQHandler /* FLASH */
.word RCC_CRS_IRQHandler /* RCC and CRS */
.word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */
.word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */
.word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */
.word TSC_IRQHandler /* TSC */
.word DMA1_Ch1_IRQHandler /* DMA1 Channel 1 */
.word DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler /* DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2 */
.word DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler /* DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5 */
.word ADC1_COMP_IRQHandler /* ADC1, COMP1 and COMP2 */
.word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */
.word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
.word TIM2_IRQHandler /* TIM2 */
.word TIM3_IRQHandler /* TIM3 */
.word TIM6_DAC_IRQHandler /* TIM6 and DAC */
.word TIM7_IRQHandler /* TIM7 */
.word TIM14_IRQHandler /* TIM14 */
.word TIM15_IRQHandler /* TIM15 */
.word TIM16_IRQHandler /* TIM16 */
.word TIM17_IRQHandler /* TIM17 */
.word I2C1_IRQHandler /* I2C1 */
.word I2C2_IRQHandler /* I2C2 */
.word SPI1_IRQHandler /* SPI1 */
.word SPI2_IRQHandler /* SPI2 */
.word USART1_IRQHandler /* USART1 */
.word USART2_IRQHandler /* USART2 */
.word USART3_8_IRQHandler /* USART3, USART4, USART5, USART6, USART7, USART8 */
.word CEC_CAN_IRQHandler /* CEC and CAN */
/*******************************************************************************
*
* Provide weak aliases for each Exception handler to the Default_Handler.
* As they are weak aliases, any function with the same name will override
* this definition.
*
*******************************************************************************/
.weak NMI_Handler
.thumb_set NMI_Handler,Default_Handler
.weak HardFault_Handler
.thumb_set HardFault_Handler,Default_Handler
.weak SVC_Handler
.thumb_set SVC_Handler,Default_Handler
.weak PendSV_Handler
.thumb_set PendSV_Handler,Default_Handler
.weak SysTick_Handler
.thumb_set SysTick_Handler,Default_Handler
.weak WWDG_IRQHandler
.thumb_set WWDG_IRQHandler,Default_Handler
.weak PVD_VDDIO2_IRQHandler
.thumb_set PVD_VDDIO2_IRQHandler,Default_Handler
.weak RTC_IRQHandler
.thumb_set RTC_IRQHandler,Default_Handler
.weak FLASH_IRQHandler
.thumb_set FLASH_IRQHandler,Default_Handler
.weak RCC_CRS_IRQHandler
.thumb_set RCC_CRS_IRQHandler,Default_Handler
.weak EXTI0_1_IRQHandler
.thumb_set EXTI0_1_IRQHandler,Default_Handler
.weak EXTI2_3_IRQHandler
.thumb_set EXTI2_3_IRQHandler,Default_Handler
.weak EXTI4_15_IRQHandler
.thumb_set EXTI4_15_IRQHandler,Default_Handler
.weak TSC_IRQHandler
.thumb_set TSC_IRQHandler,Default_Handler
.weak DMA1_Ch1_IRQHandler
.thumb_set DMA1_Ch1_IRQHandler,Default_Handler
.weak DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
.thumb_set DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler,Default_Handler
.weak DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
.thumb_set DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler,Default_Handler
.weak ADC1_COMP_IRQHandler
.thumb_set ADC1_COMP_IRQHandler,Default_Handler
.weak TIM1_BRK_UP_TRG_COM_IRQHandler
.thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
.weak TIM1_CC_IRQHandler
.thumb_set TIM1_CC_IRQHandler,Default_Handler
.weak TIM2_IRQHandler
.thumb_set TIM2_IRQHandler,Default_Handler
.weak TIM3_IRQHandler
.thumb_set TIM3_IRQHandler,Default_Handler
.weak TIM6_DAC_IRQHandler
.thumb_set TIM6_DAC_IRQHandler,Default_Handler
.weak TIM7_IRQHandler
.thumb_set TIM7_IRQHandler,Default_Handler
.weak TIM14_IRQHandler
.thumb_set TIM14_IRQHandler,Default_Handler
.weak TIM15_IRQHandler
.thumb_set TIM15_IRQHandler,Default_Handler
.weak TIM16_IRQHandler
.thumb_set TIM16_IRQHandler,Default_Handler
.weak TIM17_IRQHandler
.thumb_set TIM17_IRQHandler,Default_Handler
.weak I2C1_IRQHandler
.thumb_set I2C1_IRQHandler,Default_Handler
.weak I2C2_IRQHandler
.thumb_set I2C2_IRQHandler,Default_Handler
.weak SPI1_IRQHandler
.thumb_set SPI1_IRQHandler,Default_Handler
.weak SPI2_IRQHandler
.thumb_set SPI2_IRQHandler,Default_Handler
.weak USART1_IRQHandler
.thumb_set USART1_IRQHandler,Default_Handler
.weak USART2_IRQHandler
.thumb_set USART2_IRQHandler,Default_Handler
.weak USART3_8_IRQHandler
.thumb_set USART3_8_IRQHandler,Default_Handler
.weak CEC_CAN_IRQHandler
.thumb_set CEC_CAN_IRQHandler,Default_Handler
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
aegean-odyssey/mpmd_marlin_1.1.x
| 11,410
|
STM32Cube-1.10.1/Projects/STM32F091RC-Nucleo/Examples/COMP/COMP_Interrupt/EWARM/startup_stm32f091xc.s
|
;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
;* File Name : startup_stm32f091xc.s
;* Author : MCD Application Team
;* Description : STM32F091xc/STM32F098xc devices vector table for EWARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == __iar_program_start,
;* - Set the vector table entries with the exceptions ISR
;* address,
;* - Branches to main in the C library (which eventually
;* calls main()).
;* After Reset the Cortex-M0 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;*******************************************************************************
;*
;* Redistribution and use in source and binary forms, with or without modification,
;* are permitted provided that the following conditions are met:
;* 1. Redistributions of source code must retain the above copyright notice,
;* this list of conditions and the following disclaimer.
;* 2. Redistributions in binary form must reproduce the above copyright notice,
;* this list of conditions and the following disclaimer in the documentation
;* and/or other materials provided with the distribution.
;* 3. Neither the name of STMicroelectronics nor the names of its contributors
;* may be used to endorse or promote products derived from this software
;* without specific prior written permission.
;*
;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
;*
;*******************************************************************************
;
;
; The modules in this file are included in the libraries, and may be replaced
; by any user-defined modules that define the PUBLIC symbol _program_start or
; a user defined start symbol.
; To override the cstartup defined in the library, simply add your modified
; version to the workbench project.
;
; The vector table is normally located at address 0.
; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
; The name "__vector_table" has special meaning for C-SPY:
; it is where the SP start value is found, and the NVIC vector
; table register (VTOR) is initialized to this address if != 0.
;
; Cortex-M version
;
MODULE ?cstartup
;; Forward declaration of sections.
SECTION CSTACK:DATA:NOROOT(3)
SECTION .intvec:CODE:NOROOT(2)
EXTERN __iar_program_start
EXTERN SystemInit
PUBLIC __vector_table
DATA
__vector_table
DCD sfe(CSTACK)
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window Watchdog
DCD PVD_VDDIO2_IRQHandler ; PVD and VDDIO2 through EXTI Line detect
DCD RTC_IRQHandler ; RTC through EXTI Line
DCD FLASH_IRQHandler ; FLASH
DCD RCC_CRS_IRQHandler ; RCC and CRS
DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
DCD TSC_IRQHandler ; TS
DCD DMA1_Ch1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler ; DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2
DCD DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler ; DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5
DCD ADC1_COMP_IRQHandler ; ADC1, COMP1 and COMP2
DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC
DCD TIM7_IRQHandler ; TIM7
DCD TIM14_IRQHandler ; TIM14
DCD TIM15_IRQHandler ; TIM15
DCD TIM16_IRQHandler ; TIM16
DCD TIM17_IRQHandler ; TIM17
DCD I2C1_IRQHandler ; I2C1
DCD I2C2_IRQHandler ; I2C2
DCD SPI1_IRQHandler ; SPI1
DCD SPI2_IRQHandler ; SPI2
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD USART3_8_IRQHandler ; USART3, USART4, USART5, USART6, USART7, USART8
DCD CEC_CAN_IRQHandler ; CEC and CAN
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Default interrupt handlers.
;;
THUMB
PUBWEAK Reset_Handler
SECTION .text:CODE:NOROOT:REORDER(2)
Reset_Handler
LDR R0, =SystemInit
BLX R0
LDR R0, =__iar_program_start
BX R0
PUBWEAK NMI_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
NMI_Handler
B NMI_Handler
PUBWEAK HardFault_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
HardFault_Handler
B HardFault_Handler
PUBWEAK SVC_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
SVC_Handler
B SVC_Handler
PUBWEAK PendSV_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
PendSV_Handler
B PendSV_Handler
PUBWEAK SysTick_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
SysTick_Handler
B SysTick_Handler
PUBWEAK WWDG_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
WWDG_IRQHandler
B WWDG_IRQHandler
PUBWEAK PVD_VDDIO2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
PVD_VDDIO2_IRQHandler
B PVD_VDDIO2_IRQHandler
PUBWEAK RTC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
RTC_IRQHandler
B RTC_IRQHandler
PUBWEAK FLASH_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
FLASH_IRQHandler
B FLASH_IRQHandler
PUBWEAK RCC_CRS_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
RCC_CRS_IRQHandler
B RCC_CRS_IRQHandler
PUBWEAK EXTI0_1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI0_1_IRQHandler
B EXTI0_1_IRQHandler
PUBWEAK EXTI2_3_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI2_3_IRQHandler
B EXTI2_3_IRQHandler
PUBWEAK EXTI4_15_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI4_15_IRQHandler
B EXTI4_15_IRQHandler
PUBWEAK TSC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TSC_IRQHandler
B TSC_IRQHandler
PUBWEAK DMA1_Ch1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Ch1_IRQHandler
B DMA1_Ch1_IRQHandler
PUBWEAK DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
B DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
PUBWEAK DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
B DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
PUBWEAK ADC1_COMP_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
ADC1_COMP_IRQHandler
B ADC1_COMP_IRQHandler
PUBWEAK TIM1_BRK_UP_TRG_COM_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM1_BRK_UP_TRG_COM_IRQHandler
B TIM1_BRK_UP_TRG_COM_IRQHandler
PUBWEAK TIM1_CC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM1_CC_IRQHandler
B TIM1_CC_IRQHandler
PUBWEAK TIM2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM2_IRQHandler
B TIM2_IRQHandler
PUBWEAK TIM3_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM3_IRQHandler
B TIM3_IRQHandler
PUBWEAK TIM6_DAC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM6_DAC_IRQHandler
B TIM6_DAC_IRQHandler
PUBWEAK TIM7_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM7_IRQHandler
B TIM7_IRQHandler
PUBWEAK TIM14_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM14_IRQHandler
B TIM14_IRQHandler
PUBWEAK TIM15_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM15_IRQHandler
B TIM15_IRQHandler
PUBWEAK TIM16_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM16_IRQHandler
B TIM16_IRQHandler
PUBWEAK TIM17_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM17_IRQHandler
B TIM17_IRQHandler
PUBWEAK I2C1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
I2C1_IRQHandler
B I2C1_IRQHandler
PUBWEAK I2C2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
I2C2_IRQHandler
B I2C2_IRQHandler
PUBWEAK SPI1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
SPI1_IRQHandler
B SPI1_IRQHandler
PUBWEAK SPI2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
SPI2_IRQHandler
B SPI2_IRQHandler
PUBWEAK USART1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
USART1_IRQHandler
B USART1_IRQHandler
PUBWEAK USART2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
USART2_IRQHandler
B USART2_IRQHandler
PUBWEAK USART3_8_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
USART3_8_IRQHandler
B USART3_8_IRQHandler
PUBWEAK CEC_CAN_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
CEC_CAN_IRQHandler
B CEC_CAN_IRQHandler
END
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
|
aegean-odyssey/mpmd_marlin_1.1.x
| 11,305
|
STM32Cube-1.10.1/Projects/STM32F091RC-Nucleo/Examples/COMP/COMP_AnalogWatchdog/MDK-ARM/startup_stm32f091xc.s
|
;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
;* File Name : startup_stm32f091xc.s
;* Author : MCD Application Team
;* Description : STM32F091xc/STM32F098xc devices vector table for MDK-ARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == Reset_Handler
;* - Set the vector table entries with the exceptions ISR address
;* - Branches to __main in the C library (which eventually
;* calls main()).
;* After Reset the CortexM0 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;*******************************************************************************
;
;* Redistribution and use in source and binary forms, with or without modification,
;* are permitted provided that the following conditions are met:
;* 1. Redistributions of source code must retain the above copyright notice,
;* this list of conditions and the following disclaimer.
;* 2. Redistributions in binary form must reproduce the above copyright notice,
;* this list of conditions and the following disclaimer in the documentation
;* and/or other materials provided with the distribution.
;* 3. Neither the name of STMicroelectronics nor the names of its contributors
;* may be used to endorse or promote products derived from this software
;* without specific prior written permission.
;*
;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
;
;*******************************************************************************
; Amount of memory (in bytes) allocated for Stack
; Tailor this value to your application needs
; <h> Stack Configuration
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Stack_Size EQU 0x400;
AREA STACK, NOINIT, READWRITE, ALIGN=3
Stack_Mem SPACE Stack_Size
__initial_sp
; <h> Heap Configuration
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Heap_Size EQU 0x200;
AREA HEAP, NOINIT, READWRITE, ALIGN=3
__heap_base
Heap_Mem SPACE Heap_Size
__heap_limit
PRESERVE8
THUMB
; Vector Table Mapped to Address 0 at Reset
AREA RESET, DATA, READONLY
EXPORT __Vectors
EXPORT __Vectors_End
EXPORT __Vectors_Size
__Vectors DCD __initial_sp ; Top of Stack
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window Watchdog
DCD PVD_VDDIO2_IRQHandler ; PVD through EXTI Line detect
DCD RTC_IRQHandler ; RTC through EXTI Line
DCD FLASH_IRQHandler ; FLASH
DCD RCC_CRS_IRQHandler ; RCC and CRS
DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
DCD TSC_IRQHandler ; TS
DCD DMA1_Ch1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler ; DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2
DCD DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler ; DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5
DCD ADC1_COMP_IRQHandler ; ADC1, COMP1 and COMP2
DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC
DCD TIM7_IRQHandler ; TIM7
DCD TIM14_IRQHandler ; TIM14
DCD TIM15_IRQHandler ; TIM15
DCD TIM16_IRQHandler ; TIM16
DCD TIM17_IRQHandler ; TIM17
DCD I2C1_IRQHandler ; I2C1
DCD I2C2_IRQHandler ; I2C2
DCD SPI1_IRQHandler ; SPI1
DCD SPI2_IRQHandler ; SPI2
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD USART3_8_IRQHandler ; USART3, USART4, USART5, USART6, USART7, USART8
DCD CEC_CAN_IRQHandler ; CEC and CAN
__Vectors_End
__Vectors_Size EQU __Vectors_End - __Vectors
AREA |.text|, CODE, READONLY
; Reset handler routine
Reset_Handler PROC
EXPORT Reset_Handler [WEAK]
IMPORT __main
IMPORT SystemInit
LDR R0, =SystemInit
BLX R0
LDR R0, =__main
BX R0
ENDP
; Dummy Exception Handlers (infinite loops which can be modified)
NMI_Handler PROC
EXPORT NMI_Handler [WEAK]
B .
ENDP
HardFault_Handler\
PROC
EXPORT HardFault_Handler [WEAK]
B .
ENDP
SVC_Handler PROC
EXPORT SVC_Handler [WEAK]
B .
ENDP
PendSV_Handler PROC
EXPORT PendSV_Handler [WEAK]
B .
ENDP
SysTick_Handler PROC
EXPORT SysTick_Handler [WEAK]
B .
ENDP
Default_Handler PROC
EXPORT WWDG_IRQHandler [WEAK]
EXPORT PVD_VDDIO2_IRQHandler [WEAK]
EXPORT RTC_IRQHandler [WEAK]
EXPORT FLASH_IRQHandler [WEAK]
EXPORT RCC_CRS_IRQHandler [WEAK]
EXPORT EXTI0_1_IRQHandler [WEAK]
EXPORT EXTI2_3_IRQHandler [WEAK]
EXPORT EXTI4_15_IRQHandler [WEAK]
EXPORT TSC_IRQHandler [WEAK]
EXPORT DMA1_Ch1_IRQHandler [WEAK]
EXPORT DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler [WEAK]
EXPORT DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler [WEAK]
EXPORT ADC1_COMP_IRQHandler [WEAK]
EXPORT TIM1_BRK_UP_TRG_COM_IRQHandler [WEAK]
EXPORT TIM1_CC_IRQHandler [WEAK]
EXPORT TIM2_IRQHandler [WEAK]
EXPORT TIM3_IRQHandler [WEAK]
EXPORT TIM6_DAC_IRQHandler [WEAK]
EXPORT TIM7_IRQHandler [WEAK]
EXPORT TIM14_IRQHandler [WEAK]
EXPORT TIM15_IRQHandler [WEAK]
EXPORT TIM16_IRQHandler [WEAK]
EXPORT TIM17_IRQHandler [WEAK]
EXPORT I2C1_IRQHandler [WEAK]
EXPORT I2C2_IRQHandler [WEAK]
EXPORT SPI1_IRQHandler [WEAK]
EXPORT SPI2_IRQHandler [WEAK]
EXPORT USART1_IRQHandler [WEAK]
EXPORT USART2_IRQHandler [WEAK]
EXPORT USART3_8_IRQHandler [WEAK]
EXPORT CEC_CAN_IRQHandler [WEAK]
WWDG_IRQHandler
PVD_VDDIO2_IRQHandler
RTC_IRQHandler
FLASH_IRQHandler
RCC_CRS_IRQHandler
EXTI0_1_IRQHandler
EXTI2_3_IRQHandler
EXTI4_15_IRQHandler
TSC_IRQHandler
DMA1_Ch1_IRQHandler
DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
ADC1_COMP_IRQHandler
TIM1_BRK_UP_TRG_COM_IRQHandler
TIM1_CC_IRQHandler
TIM2_IRQHandler
TIM3_IRQHandler
TIM6_DAC_IRQHandler
TIM7_IRQHandler
TIM14_IRQHandler
TIM15_IRQHandler
TIM16_IRQHandler
TIM17_IRQHandler
I2C1_IRQHandler
I2C2_IRQHandler
SPI1_IRQHandler
SPI2_IRQHandler
USART1_IRQHandler
USART2_IRQHandler
USART3_8_IRQHandler
CEC_CAN_IRQHandler
B .
ENDP
ALIGN
;*******************************************************************************
; User Stack and Heap initialization
;*******************************************************************************
IF :DEF:__MICROLIB
EXPORT __initial_sp
EXPORT __heap_base
EXPORT __heap_limit
ELSE
IMPORT __use_two_region_memory
EXPORT __user_initial_stackheap
__user_initial_stackheap
LDR R0, = Heap_Mem
LDR R1, =(Stack_Mem + Stack_Size)
LDR R2, = (Heap_Mem + Heap_Size)
LDR R3, = Stack_Mem
BX LR
ALIGN
ENDIF
END
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
|
aegean-odyssey/mpmd_marlin_1.1.x
| 10,745
|
STM32Cube-1.10.1/Projects/STM32F091RC-Nucleo/Examples/COMP/COMP_AnalogWatchdog/SW4STM32/startup_stm32f091xc.s
|
/**
******************************************************************************
* @file startup_stm32f091xc.s
* @author MCD Application Team
* @brief STM32F091xC devices vector table for GCC toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M0 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
.syntax unified
.cpu cortex-m0
.fpu softvfp
.thumb
.global g_pfnVectors
.global Default_Handler
/* start address for the initialization values of the .data section.
defined in linker script */
.word _sidata
/* start address for the .data section. defined in linker script */
.word _sdata
/* end address for the .data section. defined in linker script */
.word _edata
/* start address for the .bss section. defined in linker script */
.word _sbss
/* end address for the .bss section. defined in linker script */
.word _ebss
.section .text.Reset_Handler
.weak Reset_Handler
.type Reset_Handler, %function
Reset_Handler:
ldr r0, =_estack
mov sp, r0 /* set stack pointer */
/* Copy the data segment initializers from flash to SRAM */
movs r1, #0
b LoopCopyDataInit
CopyDataInit:
ldr r3, =_sidata
ldr r3, [r3, r1]
str r3, [r0, r1]
adds r1, r1, #4
LoopCopyDataInit:
ldr r0, =_sdata
ldr r3, =_edata
adds r2, r0, r1
cmp r2, r3
bcc CopyDataInit
ldr r2, =_sbss
b LoopFillZerobss
/* Zero fill the bss segment. */
FillZerobss:
movs r3, #0
str r3, [r2]
adds r2, r2, #4
LoopFillZerobss:
ldr r3, = _ebss
cmp r2, r3
bcc FillZerobss
/* Call the clock system intitialization function.*/
bl SystemInit
/* Call static constructors */
bl __libc_init_array
/* Call the application's entry point.*/
bl main
LoopForever:
b LoopForever
.size Reset_Handler, .-Reset_Handler
/**
* @brief This is the code that gets called when the processor receives an
* unexpected interrupt. This simply enters an infinite loop, preserving
* the system state for examination by a debugger.
*
* @param None
* @retval : None
*/
.section .text.Default_Handler,"ax",%progbits
Default_Handler:
Infinite_Loop:
b Infinite_Loop
.size Default_Handler, .-Default_Handler
/******************************************************************************
*
* The minimal vector table for a Cortex M0. Note that the proper constructs
* must be placed on this to ensure that it ends up at physical address
* 0x0000.0000.
*
******************************************************************************/
.section .isr_vector,"a",%progbits
.type g_pfnVectors, %object
.size g_pfnVectors, .-g_pfnVectors
g_pfnVectors:
.word _estack
.word Reset_Handler
.word NMI_Handler
.word HardFault_Handler
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word SVC_Handler
.word 0
.word 0
.word PendSV_Handler
.word SysTick_Handler
.word WWDG_IRQHandler /* Window WatchDog */
.word PVD_VDDIO2_IRQHandler /* PVD and VDDIO2 through EXTI Line detect */
.word RTC_IRQHandler /* RTC through the EXTI line */
.word FLASH_IRQHandler /* FLASH */
.word RCC_CRS_IRQHandler /* RCC and CRS */
.word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */
.word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */
.word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */
.word TSC_IRQHandler /* TSC */
.word DMA1_Ch1_IRQHandler /* DMA1 Channel 1 */
.word DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler /* DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2 */
.word DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler /* DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5 */
.word ADC1_COMP_IRQHandler /* ADC1, COMP1 and COMP2 */
.word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */
.word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
.word TIM2_IRQHandler /* TIM2 */
.word TIM3_IRQHandler /* TIM3 */
.word TIM6_DAC_IRQHandler /* TIM6 and DAC */
.word TIM7_IRQHandler /* TIM7 */
.word TIM14_IRQHandler /* TIM14 */
.word TIM15_IRQHandler /* TIM15 */
.word TIM16_IRQHandler /* TIM16 */
.word TIM17_IRQHandler /* TIM17 */
.word I2C1_IRQHandler /* I2C1 */
.word I2C2_IRQHandler /* I2C2 */
.word SPI1_IRQHandler /* SPI1 */
.word SPI2_IRQHandler /* SPI2 */
.word USART1_IRQHandler /* USART1 */
.word USART2_IRQHandler /* USART2 */
.word USART3_8_IRQHandler /* USART3, USART4, USART5, USART6, USART7, USART8 */
.word CEC_CAN_IRQHandler /* CEC and CAN */
/*******************************************************************************
*
* Provide weak aliases for each Exception handler to the Default_Handler.
* As they are weak aliases, any function with the same name will override
* this definition.
*
*******************************************************************************/
.weak NMI_Handler
.thumb_set NMI_Handler,Default_Handler
.weak HardFault_Handler
.thumb_set HardFault_Handler,Default_Handler
.weak SVC_Handler
.thumb_set SVC_Handler,Default_Handler
.weak PendSV_Handler
.thumb_set PendSV_Handler,Default_Handler
.weak SysTick_Handler
.thumb_set SysTick_Handler,Default_Handler
.weak WWDG_IRQHandler
.thumb_set WWDG_IRQHandler,Default_Handler
.weak PVD_VDDIO2_IRQHandler
.thumb_set PVD_VDDIO2_IRQHandler,Default_Handler
.weak RTC_IRQHandler
.thumb_set RTC_IRQHandler,Default_Handler
.weak FLASH_IRQHandler
.thumb_set FLASH_IRQHandler,Default_Handler
.weak RCC_CRS_IRQHandler
.thumb_set RCC_CRS_IRQHandler,Default_Handler
.weak EXTI0_1_IRQHandler
.thumb_set EXTI0_1_IRQHandler,Default_Handler
.weak EXTI2_3_IRQHandler
.thumb_set EXTI2_3_IRQHandler,Default_Handler
.weak EXTI4_15_IRQHandler
.thumb_set EXTI4_15_IRQHandler,Default_Handler
.weak TSC_IRQHandler
.thumb_set TSC_IRQHandler,Default_Handler
.weak DMA1_Ch1_IRQHandler
.thumb_set DMA1_Ch1_IRQHandler,Default_Handler
.weak DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
.thumb_set DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler,Default_Handler
.weak DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
.thumb_set DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler,Default_Handler
.weak ADC1_COMP_IRQHandler
.thumb_set ADC1_COMP_IRQHandler,Default_Handler
.weak TIM1_BRK_UP_TRG_COM_IRQHandler
.thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
.weak TIM1_CC_IRQHandler
.thumb_set TIM1_CC_IRQHandler,Default_Handler
.weak TIM2_IRQHandler
.thumb_set TIM2_IRQHandler,Default_Handler
.weak TIM3_IRQHandler
.thumb_set TIM3_IRQHandler,Default_Handler
.weak TIM6_DAC_IRQHandler
.thumb_set TIM6_DAC_IRQHandler,Default_Handler
.weak TIM7_IRQHandler
.thumb_set TIM7_IRQHandler,Default_Handler
.weak TIM14_IRQHandler
.thumb_set TIM14_IRQHandler,Default_Handler
.weak TIM15_IRQHandler
.thumb_set TIM15_IRQHandler,Default_Handler
.weak TIM16_IRQHandler
.thumb_set TIM16_IRQHandler,Default_Handler
.weak TIM17_IRQHandler
.thumb_set TIM17_IRQHandler,Default_Handler
.weak I2C1_IRQHandler
.thumb_set I2C1_IRQHandler,Default_Handler
.weak I2C2_IRQHandler
.thumb_set I2C2_IRQHandler,Default_Handler
.weak SPI1_IRQHandler
.thumb_set SPI1_IRQHandler,Default_Handler
.weak SPI2_IRQHandler
.thumb_set SPI2_IRQHandler,Default_Handler
.weak USART1_IRQHandler
.thumb_set USART1_IRQHandler,Default_Handler
.weak USART2_IRQHandler
.thumb_set USART2_IRQHandler,Default_Handler
.weak USART3_8_IRQHandler
.thumb_set USART3_8_IRQHandler,Default_Handler
.weak CEC_CAN_IRQHandler
.thumb_set CEC_CAN_IRQHandler,Default_Handler
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
aegean-odyssey/mpmd_marlin_1.1.x
| 11,410
|
STM32Cube-1.10.1/Projects/STM32F091RC-Nucleo/Examples/COMP/COMP_AnalogWatchdog/EWARM/startup_stm32f091xc.s
|
;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
;* File Name : startup_stm32f091xc.s
;* Author : MCD Application Team
;* Description : STM32F091xc/STM32F098xc devices vector table for EWARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == __iar_program_start,
;* - Set the vector table entries with the exceptions ISR
;* address,
;* - Branches to main in the C library (which eventually
;* calls main()).
;* After Reset the Cortex-M0 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;*******************************************************************************
;*
;* Redistribution and use in source and binary forms, with or without modification,
;* are permitted provided that the following conditions are met:
;* 1. Redistributions of source code must retain the above copyright notice,
;* this list of conditions and the following disclaimer.
;* 2. Redistributions in binary form must reproduce the above copyright notice,
;* this list of conditions and the following disclaimer in the documentation
;* and/or other materials provided with the distribution.
;* 3. Neither the name of STMicroelectronics nor the names of its contributors
;* may be used to endorse or promote products derived from this software
;* without specific prior written permission.
;*
;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
;*
;*******************************************************************************
;
;
; The modules in this file are included in the libraries, and may be replaced
; by any user-defined modules that define the PUBLIC symbol _program_start or
; a user defined start symbol.
; To override the cstartup defined in the library, simply add your modified
; version to the workbench project.
;
; The vector table is normally located at address 0.
; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
; The name "__vector_table" has special meaning for C-SPY:
; it is where the SP start value is found, and the NVIC vector
; table register (VTOR) is initialized to this address if != 0.
;
; Cortex-M version
;
MODULE ?cstartup
;; Forward declaration of sections.
SECTION CSTACK:DATA:NOROOT(3)
SECTION .intvec:CODE:NOROOT(2)
EXTERN __iar_program_start
EXTERN SystemInit
PUBLIC __vector_table
DATA
__vector_table
DCD sfe(CSTACK)
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window Watchdog
DCD PVD_VDDIO2_IRQHandler ; PVD and VDDIO2 through EXTI Line detect
DCD RTC_IRQHandler ; RTC through EXTI Line
DCD FLASH_IRQHandler ; FLASH
DCD RCC_CRS_IRQHandler ; RCC and CRS
DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
DCD TSC_IRQHandler ; TS
DCD DMA1_Ch1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler ; DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2
DCD DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler ; DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5
DCD ADC1_COMP_IRQHandler ; ADC1, COMP1 and COMP2
DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC
DCD TIM7_IRQHandler ; TIM7
DCD TIM14_IRQHandler ; TIM14
DCD TIM15_IRQHandler ; TIM15
DCD TIM16_IRQHandler ; TIM16
DCD TIM17_IRQHandler ; TIM17
DCD I2C1_IRQHandler ; I2C1
DCD I2C2_IRQHandler ; I2C2
DCD SPI1_IRQHandler ; SPI1
DCD SPI2_IRQHandler ; SPI2
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD USART3_8_IRQHandler ; USART3, USART4, USART5, USART6, USART7, USART8
DCD CEC_CAN_IRQHandler ; CEC and CAN
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Default interrupt handlers.
;;
THUMB
PUBWEAK Reset_Handler
SECTION .text:CODE:NOROOT:REORDER(2)
Reset_Handler
LDR R0, =SystemInit
BLX R0
LDR R0, =__iar_program_start
BX R0
PUBWEAK NMI_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
NMI_Handler
B NMI_Handler
PUBWEAK HardFault_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
HardFault_Handler
B HardFault_Handler
PUBWEAK SVC_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
SVC_Handler
B SVC_Handler
PUBWEAK PendSV_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
PendSV_Handler
B PendSV_Handler
PUBWEAK SysTick_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
SysTick_Handler
B SysTick_Handler
PUBWEAK WWDG_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
WWDG_IRQHandler
B WWDG_IRQHandler
PUBWEAK PVD_VDDIO2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
PVD_VDDIO2_IRQHandler
B PVD_VDDIO2_IRQHandler
PUBWEAK RTC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
RTC_IRQHandler
B RTC_IRQHandler
PUBWEAK FLASH_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
FLASH_IRQHandler
B FLASH_IRQHandler
PUBWEAK RCC_CRS_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
RCC_CRS_IRQHandler
B RCC_CRS_IRQHandler
PUBWEAK EXTI0_1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI0_1_IRQHandler
B EXTI0_1_IRQHandler
PUBWEAK EXTI2_3_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI2_3_IRQHandler
B EXTI2_3_IRQHandler
PUBWEAK EXTI4_15_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI4_15_IRQHandler
B EXTI4_15_IRQHandler
PUBWEAK TSC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TSC_IRQHandler
B TSC_IRQHandler
PUBWEAK DMA1_Ch1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Ch1_IRQHandler
B DMA1_Ch1_IRQHandler
PUBWEAK DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
B DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
PUBWEAK DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
B DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
PUBWEAK ADC1_COMP_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
ADC1_COMP_IRQHandler
B ADC1_COMP_IRQHandler
PUBWEAK TIM1_BRK_UP_TRG_COM_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM1_BRK_UP_TRG_COM_IRQHandler
B TIM1_BRK_UP_TRG_COM_IRQHandler
PUBWEAK TIM1_CC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM1_CC_IRQHandler
B TIM1_CC_IRQHandler
PUBWEAK TIM2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM2_IRQHandler
B TIM2_IRQHandler
PUBWEAK TIM3_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM3_IRQHandler
B TIM3_IRQHandler
PUBWEAK TIM6_DAC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM6_DAC_IRQHandler
B TIM6_DAC_IRQHandler
PUBWEAK TIM7_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM7_IRQHandler
B TIM7_IRQHandler
PUBWEAK TIM14_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM14_IRQHandler
B TIM14_IRQHandler
PUBWEAK TIM15_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM15_IRQHandler
B TIM15_IRQHandler
PUBWEAK TIM16_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM16_IRQHandler
B TIM16_IRQHandler
PUBWEAK TIM17_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM17_IRQHandler
B TIM17_IRQHandler
PUBWEAK I2C1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
I2C1_IRQHandler
B I2C1_IRQHandler
PUBWEAK I2C2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
I2C2_IRQHandler
B I2C2_IRQHandler
PUBWEAK SPI1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
SPI1_IRQHandler
B SPI1_IRQHandler
PUBWEAK SPI2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
SPI2_IRQHandler
B SPI2_IRQHandler
PUBWEAK USART1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
USART1_IRQHandler
B USART1_IRQHandler
PUBWEAK USART2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
USART2_IRQHandler
B USART2_IRQHandler
PUBWEAK USART3_8_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
USART3_8_IRQHandler
B USART3_8_IRQHandler
PUBWEAK CEC_CAN_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
CEC_CAN_IRQHandler
B CEC_CAN_IRQHandler
END
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
|
aegean-odyssey/mpmd_marlin_1.1.x
| 11,356
|
STM32Cube-1.10.1/Projects/STM32F091RC-Nucleo/Examples/IWDG/IWDG_Reset/MDK-ARM/startup_stm32f091xc.s
|
;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
;* File Name : startup_stm32f091xc.s
;* Author : MCD Application Team
;* Description : STM32F091xc/STM32F098xc devices vector table for MDK-ARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == Reset_Handler
;* - Set the vector table entries with the exceptions ISR address
;* - Branches to __main in the C library (which eventually
;* calls main()).
;* After Reset the CortexM0 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;* <<< Use Configuration Wizard in Context Menu >>>
;*******************************************************************************
;*
;* Redistribution and use in source and binary forms, with or without modification,
;* are permitted provided that the following conditions are met:
;* 1. Redistributions of source code must retain the above copyright notice,
;* this list of conditions and the following disclaimer.
;* 2. Redistributions in binary form must reproduce the above copyright notice,
;* this list of conditions and the following disclaimer in the documentation
;* and/or other materials provided with the distribution.
;* 3. Neither the name of STMicroelectronics nor the names of its contributors
;* may be used to endorse or promote products derived from this software
;* without specific prior written permission.
;*
;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
;
;*******************************************************************************
; Amount of memory (in bytes) allocated for Stack
; Tailor this value to your application needs
; <h> Stack Configuration
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Stack_Size EQU 0x400
AREA STACK, NOINIT, READWRITE, ALIGN=3
Stack_Mem SPACE Stack_Size
__initial_sp
; <h> Heap Configuration
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Heap_Size EQU 0x200
AREA HEAP, NOINIT, READWRITE, ALIGN=3
__heap_base
Heap_Mem SPACE Heap_Size
__heap_limit
PRESERVE8
THUMB
; Vector Table Mapped to Address 0 at Reset
AREA RESET, DATA, READONLY
EXPORT __Vectors
EXPORT __Vectors_End
EXPORT __Vectors_Size
__Vectors DCD __initial_sp ; Top of Stack
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window Watchdog
DCD PVD_VDDIO2_IRQHandler ; PVD through EXTI Line detect
DCD RTC_IRQHandler ; RTC through EXTI Line
DCD FLASH_IRQHandler ; FLASH
DCD RCC_CRS_IRQHandler ; RCC and CRS
DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
DCD TSC_IRQHandler ; TS
DCD DMA1_Ch1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler ; DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2
DCD DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler ; DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5
DCD ADC1_COMP_IRQHandler ; ADC1, COMP1 and COMP2
DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC
DCD TIM7_IRQHandler ; TIM7
DCD TIM14_IRQHandler ; TIM14
DCD TIM15_IRQHandler ; TIM15
DCD TIM16_IRQHandler ; TIM16
DCD TIM17_IRQHandler ; TIM17
DCD I2C1_IRQHandler ; I2C1
DCD I2C2_IRQHandler ; I2C2
DCD SPI1_IRQHandler ; SPI1
DCD SPI2_IRQHandler ; SPI2
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD USART3_8_IRQHandler ; USART3, USART4, USART5, USART6, USART7, USART8
DCD CEC_CAN_IRQHandler ; CEC and CAN
__Vectors_End
__Vectors_Size EQU __Vectors_End - __Vectors
AREA |.text|, CODE, READONLY
; Reset handler routine
Reset_Handler PROC
EXPORT Reset_Handler [WEAK]
IMPORT __main
IMPORT SystemInit
LDR R0, =SystemInit
BLX R0
LDR R0, =__main
BX R0
ENDP
; Dummy Exception Handlers (infinite loops which can be modified)
NMI_Handler PROC
EXPORT NMI_Handler [WEAK]
B .
ENDP
HardFault_Handler\
PROC
EXPORT HardFault_Handler [WEAK]
B .
ENDP
SVC_Handler PROC
EXPORT SVC_Handler [WEAK]
B .
ENDP
PendSV_Handler PROC
EXPORT PendSV_Handler [WEAK]
B .
ENDP
SysTick_Handler PROC
EXPORT SysTick_Handler [WEAK]
B .
ENDP
Default_Handler PROC
EXPORT WWDG_IRQHandler [WEAK]
EXPORT PVD_VDDIO2_IRQHandler [WEAK]
EXPORT RTC_IRQHandler [WEAK]
EXPORT FLASH_IRQHandler [WEAK]
EXPORT RCC_CRS_IRQHandler [WEAK]
EXPORT EXTI0_1_IRQHandler [WEAK]
EXPORT EXTI2_3_IRQHandler [WEAK]
EXPORT EXTI4_15_IRQHandler [WEAK]
EXPORT TSC_IRQHandler [WEAK]
EXPORT DMA1_Ch1_IRQHandler [WEAK]
EXPORT DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler [WEAK]
EXPORT DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler [WEAK]
EXPORT ADC1_COMP_IRQHandler [WEAK]
EXPORT TIM1_BRK_UP_TRG_COM_IRQHandler [WEAK]
EXPORT TIM1_CC_IRQHandler [WEAK]
EXPORT TIM2_IRQHandler [WEAK]
EXPORT TIM3_IRQHandler [WEAK]
EXPORT TIM6_DAC_IRQHandler [WEAK]
EXPORT TIM7_IRQHandler [WEAK]
EXPORT TIM14_IRQHandler [WEAK]
EXPORT TIM15_IRQHandler [WEAK]
EXPORT TIM16_IRQHandler [WEAK]
EXPORT TIM17_IRQHandler [WEAK]
EXPORT I2C1_IRQHandler [WEAK]
EXPORT I2C2_IRQHandler [WEAK]
EXPORT SPI1_IRQHandler [WEAK]
EXPORT SPI2_IRQHandler [WEAK]
EXPORT USART1_IRQHandler [WEAK]
EXPORT USART2_IRQHandler [WEAK]
EXPORT USART3_8_IRQHandler [WEAK]
EXPORT CEC_CAN_IRQHandler [WEAK]
WWDG_IRQHandler
PVD_VDDIO2_IRQHandler
RTC_IRQHandler
FLASH_IRQHandler
RCC_CRS_IRQHandler
EXTI0_1_IRQHandler
EXTI2_3_IRQHandler
EXTI4_15_IRQHandler
TSC_IRQHandler
DMA1_Ch1_IRQHandler
DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
ADC1_COMP_IRQHandler
TIM1_BRK_UP_TRG_COM_IRQHandler
TIM1_CC_IRQHandler
TIM2_IRQHandler
TIM3_IRQHandler
TIM6_DAC_IRQHandler
TIM7_IRQHandler
TIM14_IRQHandler
TIM15_IRQHandler
TIM16_IRQHandler
TIM17_IRQHandler
I2C1_IRQHandler
I2C2_IRQHandler
SPI1_IRQHandler
SPI2_IRQHandler
USART1_IRQHandler
USART2_IRQHandler
USART3_8_IRQHandler
CEC_CAN_IRQHandler
B .
ENDP
ALIGN
;*******************************************************************************
; User Stack and Heap initialization
;*******************************************************************************
IF :DEF:__MICROLIB
EXPORT __initial_sp
EXPORT __heap_base
EXPORT __heap_limit
ELSE
IMPORT __use_two_region_memory
EXPORT __user_initial_stackheap
__user_initial_stackheap
LDR R0, = Heap_Mem
LDR R1, =(Stack_Mem + Stack_Size)
LDR R2, = (Heap_Mem + Heap_Size)
LDR R3, = Stack_Mem
BX LR
ALIGN
ENDIF
END
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
|
aegean-odyssey/mpmd_marlin_1.1.x
| 10,745
|
STM32Cube-1.10.1/Projects/STM32F091RC-Nucleo/Examples/IWDG/IWDG_Reset/SW4STM32/startup_stm32f091xc.s
|
/**
******************************************************************************
* @file startup_stm32f091xc.s
* @author MCD Application Team
* @brief STM32F091xC devices vector table for GCC toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M0 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
.syntax unified
.cpu cortex-m0
.fpu softvfp
.thumb
.global g_pfnVectors
.global Default_Handler
/* start address for the initialization values of the .data section.
defined in linker script */
.word _sidata
/* start address for the .data section. defined in linker script */
.word _sdata
/* end address for the .data section. defined in linker script */
.word _edata
/* start address for the .bss section. defined in linker script */
.word _sbss
/* end address for the .bss section. defined in linker script */
.word _ebss
.section .text.Reset_Handler
.weak Reset_Handler
.type Reset_Handler, %function
Reset_Handler:
ldr r0, =_estack
mov sp, r0 /* set stack pointer */
/* Copy the data segment initializers from flash to SRAM */
movs r1, #0
b LoopCopyDataInit
CopyDataInit:
ldr r3, =_sidata
ldr r3, [r3, r1]
str r3, [r0, r1]
adds r1, r1, #4
LoopCopyDataInit:
ldr r0, =_sdata
ldr r3, =_edata
adds r2, r0, r1
cmp r2, r3
bcc CopyDataInit
ldr r2, =_sbss
b LoopFillZerobss
/* Zero fill the bss segment. */
FillZerobss:
movs r3, #0
str r3, [r2]
adds r2, r2, #4
LoopFillZerobss:
ldr r3, = _ebss
cmp r2, r3
bcc FillZerobss
/* Call the clock system intitialization function.*/
bl SystemInit
/* Call static constructors */
bl __libc_init_array
/* Call the application's entry point.*/
bl main
LoopForever:
b LoopForever
.size Reset_Handler, .-Reset_Handler
/**
* @brief This is the code that gets called when the processor receives an
* unexpected interrupt. This simply enters an infinite loop, preserving
* the system state for examination by a debugger.
*
* @param None
* @retval : None
*/
.section .text.Default_Handler,"ax",%progbits
Default_Handler:
Infinite_Loop:
b Infinite_Loop
.size Default_Handler, .-Default_Handler
/******************************************************************************
*
* The minimal vector table for a Cortex M0. Note that the proper constructs
* must be placed on this to ensure that it ends up at physical address
* 0x0000.0000.
*
******************************************************************************/
.section .isr_vector,"a",%progbits
.type g_pfnVectors, %object
.size g_pfnVectors, .-g_pfnVectors
g_pfnVectors:
.word _estack
.word Reset_Handler
.word NMI_Handler
.word HardFault_Handler
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word SVC_Handler
.word 0
.word 0
.word PendSV_Handler
.word SysTick_Handler
.word WWDG_IRQHandler /* Window WatchDog */
.word PVD_VDDIO2_IRQHandler /* PVD and VDDIO2 through EXTI Line detect */
.word RTC_IRQHandler /* RTC through the EXTI line */
.word FLASH_IRQHandler /* FLASH */
.word RCC_CRS_IRQHandler /* RCC and CRS */
.word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */
.word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */
.word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */
.word TSC_IRQHandler /* TSC */
.word DMA1_Ch1_IRQHandler /* DMA1 Channel 1 */
.word DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler /* DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2 */
.word DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler /* DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5 */
.word ADC1_COMP_IRQHandler /* ADC1, COMP1 and COMP2 */
.word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */
.word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
.word TIM2_IRQHandler /* TIM2 */
.word TIM3_IRQHandler /* TIM3 */
.word TIM6_DAC_IRQHandler /* TIM6 and DAC */
.word TIM7_IRQHandler /* TIM7 */
.word TIM14_IRQHandler /* TIM14 */
.word TIM15_IRQHandler /* TIM15 */
.word TIM16_IRQHandler /* TIM16 */
.word TIM17_IRQHandler /* TIM17 */
.word I2C1_IRQHandler /* I2C1 */
.word I2C2_IRQHandler /* I2C2 */
.word SPI1_IRQHandler /* SPI1 */
.word SPI2_IRQHandler /* SPI2 */
.word USART1_IRQHandler /* USART1 */
.word USART2_IRQHandler /* USART2 */
.word USART3_8_IRQHandler /* USART3, USART4, USART5, USART6, USART7, USART8 */
.word CEC_CAN_IRQHandler /* CEC and CAN */
/*******************************************************************************
*
* Provide weak aliases for each Exception handler to the Default_Handler.
* As they are weak aliases, any function with the same name will override
* this definition.
*
*******************************************************************************/
.weak NMI_Handler
.thumb_set NMI_Handler,Default_Handler
.weak HardFault_Handler
.thumb_set HardFault_Handler,Default_Handler
.weak SVC_Handler
.thumb_set SVC_Handler,Default_Handler
.weak PendSV_Handler
.thumb_set PendSV_Handler,Default_Handler
.weak SysTick_Handler
.thumb_set SysTick_Handler,Default_Handler
.weak WWDG_IRQHandler
.thumb_set WWDG_IRQHandler,Default_Handler
.weak PVD_VDDIO2_IRQHandler
.thumb_set PVD_VDDIO2_IRQHandler,Default_Handler
.weak RTC_IRQHandler
.thumb_set RTC_IRQHandler,Default_Handler
.weak FLASH_IRQHandler
.thumb_set FLASH_IRQHandler,Default_Handler
.weak RCC_CRS_IRQHandler
.thumb_set RCC_CRS_IRQHandler,Default_Handler
.weak EXTI0_1_IRQHandler
.thumb_set EXTI0_1_IRQHandler,Default_Handler
.weak EXTI2_3_IRQHandler
.thumb_set EXTI2_3_IRQHandler,Default_Handler
.weak EXTI4_15_IRQHandler
.thumb_set EXTI4_15_IRQHandler,Default_Handler
.weak TSC_IRQHandler
.thumb_set TSC_IRQHandler,Default_Handler
.weak DMA1_Ch1_IRQHandler
.thumb_set DMA1_Ch1_IRQHandler,Default_Handler
.weak DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
.thumb_set DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler,Default_Handler
.weak DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
.thumb_set DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler,Default_Handler
.weak ADC1_COMP_IRQHandler
.thumb_set ADC1_COMP_IRQHandler,Default_Handler
.weak TIM1_BRK_UP_TRG_COM_IRQHandler
.thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
.weak TIM1_CC_IRQHandler
.thumb_set TIM1_CC_IRQHandler,Default_Handler
.weak TIM2_IRQHandler
.thumb_set TIM2_IRQHandler,Default_Handler
.weak TIM3_IRQHandler
.thumb_set TIM3_IRQHandler,Default_Handler
.weak TIM6_DAC_IRQHandler
.thumb_set TIM6_DAC_IRQHandler,Default_Handler
.weak TIM7_IRQHandler
.thumb_set TIM7_IRQHandler,Default_Handler
.weak TIM14_IRQHandler
.thumb_set TIM14_IRQHandler,Default_Handler
.weak TIM15_IRQHandler
.thumb_set TIM15_IRQHandler,Default_Handler
.weak TIM16_IRQHandler
.thumb_set TIM16_IRQHandler,Default_Handler
.weak TIM17_IRQHandler
.thumb_set TIM17_IRQHandler,Default_Handler
.weak I2C1_IRQHandler
.thumb_set I2C1_IRQHandler,Default_Handler
.weak I2C2_IRQHandler
.thumb_set I2C2_IRQHandler,Default_Handler
.weak SPI1_IRQHandler
.thumb_set SPI1_IRQHandler,Default_Handler
.weak SPI2_IRQHandler
.thumb_set SPI2_IRQHandler,Default_Handler
.weak USART1_IRQHandler
.thumb_set USART1_IRQHandler,Default_Handler
.weak USART2_IRQHandler
.thumb_set USART2_IRQHandler,Default_Handler
.weak USART3_8_IRQHandler
.thumb_set USART3_8_IRQHandler,Default_Handler
.weak CEC_CAN_IRQHandler
.thumb_set CEC_CAN_IRQHandler,Default_Handler
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
aegean-odyssey/mpmd_marlin_1.1.x
| 11,410
|
STM32Cube-1.10.1/Projects/STM32F091RC-Nucleo/Examples/IWDG/IWDG_Reset/EWARM/startup_stm32f091xc.s
|
;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
;* File Name : startup_stm32f091xc.s
;* Author : MCD Application Team
;* Description : STM32F091xc/STM32F098xc devices vector table for EWARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == __iar_program_start,
;* - Set the vector table entries with the exceptions ISR
;* address,
;* - Branches to main in the C library (which eventually
;* calls main()).
;* After Reset the Cortex-M0 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;*******************************************************************************
;*
;* Redistribution and use in source and binary forms, with or without modification,
;* are permitted provided that the following conditions are met:
;* 1. Redistributions of source code must retain the above copyright notice,
;* this list of conditions and the following disclaimer.
;* 2. Redistributions in binary form must reproduce the above copyright notice,
;* this list of conditions and the following disclaimer in the documentation
;* and/or other materials provided with the distribution.
;* 3. Neither the name of STMicroelectronics nor the names of its contributors
;* may be used to endorse or promote products derived from this software
;* without specific prior written permission.
;*
;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
;*
;*******************************************************************************
;
;
; The modules in this file are included in the libraries, and may be replaced
; by any user-defined modules that define the PUBLIC symbol _program_start or
; a user defined start symbol.
; To override the cstartup defined in the library, simply add your modified
; version to the workbench project.
;
; The vector table is normally located at address 0.
; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
; The name "__vector_table" has special meaning for C-SPY:
; it is where the SP start value is found, and the NVIC vector
; table register (VTOR) is initialized to this address if != 0.
;
; Cortex-M version
;
MODULE ?cstartup
;; Forward declaration of sections.
SECTION CSTACK:DATA:NOROOT(3)
SECTION .intvec:CODE:NOROOT(2)
EXTERN __iar_program_start
EXTERN SystemInit
PUBLIC __vector_table
DATA
__vector_table
DCD sfe(CSTACK)
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window Watchdog
DCD PVD_VDDIO2_IRQHandler ; PVD and VDDIO2 through EXTI Line detect
DCD RTC_IRQHandler ; RTC through EXTI Line
DCD FLASH_IRQHandler ; FLASH
DCD RCC_CRS_IRQHandler ; RCC and CRS
DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
DCD TSC_IRQHandler ; TS
DCD DMA1_Ch1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler ; DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2
DCD DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler ; DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5
DCD ADC1_COMP_IRQHandler ; ADC1, COMP1 and COMP2
DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC
DCD TIM7_IRQHandler ; TIM7
DCD TIM14_IRQHandler ; TIM14
DCD TIM15_IRQHandler ; TIM15
DCD TIM16_IRQHandler ; TIM16
DCD TIM17_IRQHandler ; TIM17
DCD I2C1_IRQHandler ; I2C1
DCD I2C2_IRQHandler ; I2C2
DCD SPI1_IRQHandler ; SPI1
DCD SPI2_IRQHandler ; SPI2
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD USART3_8_IRQHandler ; USART3, USART4, USART5, USART6, USART7, USART8
DCD CEC_CAN_IRQHandler ; CEC and CAN
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Default interrupt handlers.
;;
THUMB
PUBWEAK Reset_Handler
SECTION .text:CODE:NOROOT:REORDER(2)
Reset_Handler
LDR R0, =SystemInit
BLX R0
LDR R0, =__iar_program_start
BX R0
PUBWEAK NMI_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
NMI_Handler
B NMI_Handler
PUBWEAK HardFault_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
HardFault_Handler
B HardFault_Handler
PUBWEAK SVC_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
SVC_Handler
B SVC_Handler
PUBWEAK PendSV_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
PendSV_Handler
B PendSV_Handler
PUBWEAK SysTick_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
SysTick_Handler
B SysTick_Handler
PUBWEAK WWDG_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
WWDG_IRQHandler
B WWDG_IRQHandler
PUBWEAK PVD_VDDIO2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
PVD_VDDIO2_IRQHandler
B PVD_VDDIO2_IRQHandler
PUBWEAK RTC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
RTC_IRQHandler
B RTC_IRQHandler
PUBWEAK FLASH_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
FLASH_IRQHandler
B FLASH_IRQHandler
PUBWEAK RCC_CRS_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
RCC_CRS_IRQHandler
B RCC_CRS_IRQHandler
PUBWEAK EXTI0_1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI0_1_IRQHandler
B EXTI0_1_IRQHandler
PUBWEAK EXTI2_3_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI2_3_IRQHandler
B EXTI2_3_IRQHandler
PUBWEAK EXTI4_15_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI4_15_IRQHandler
B EXTI4_15_IRQHandler
PUBWEAK TSC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TSC_IRQHandler
B TSC_IRQHandler
PUBWEAK DMA1_Ch1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Ch1_IRQHandler
B DMA1_Ch1_IRQHandler
PUBWEAK DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
B DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
PUBWEAK DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
B DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
PUBWEAK ADC1_COMP_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
ADC1_COMP_IRQHandler
B ADC1_COMP_IRQHandler
PUBWEAK TIM1_BRK_UP_TRG_COM_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM1_BRK_UP_TRG_COM_IRQHandler
B TIM1_BRK_UP_TRG_COM_IRQHandler
PUBWEAK TIM1_CC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM1_CC_IRQHandler
B TIM1_CC_IRQHandler
PUBWEAK TIM2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM2_IRQHandler
B TIM2_IRQHandler
PUBWEAK TIM3_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM3_IRQHandler
B TIM3_IRQHandler
PUBWEAK TIM6_DAC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM6_DAC_IRQHandler
B TIM6_DAC_IRQHandler
PUBWEAK TIM7_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM7_IRQHandler
B TIM7_IRQHandler
PUBWEAK TIM14_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM14_IRQHandler
B TIM14_IRQHandler
PUBWEAK TIM15_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM15_IRQHandler
B TIM15_IRQHandler
PUBWEAK TIM16_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM16_IRQHandler
B TIM16_IRQHandler
PUBWEAK TIM17_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM17_IRQHandler
B TIM17_IRQHandler
PUBWEAK I2C1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
I2C1_IRQHandler
B I2C1_IRQHandler
PUBWEAK I2C2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
I2C2_IRQHandler
B I2C2_IRQHandler
PUBWEAK SPI1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
SPI1_IRQHandler
B SPI1_IRQHandler
PUBWEAK SPI2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
SPI2_IRQHandler
B SPI2_IRQHandler
PUBWEAK USART1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
USART1_IRQHandler
B USART1_IRQHandler
PUBWEAK USART2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
USART2_IRQHandler
B USART2_IRQHandler
PUBWEAK USART3_8_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
USART3_8_IRQHandler
B USART3_8_IRQHandler
PUBWEAK CEC_CAN_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
CEC_CAN_IRQHandler
B CEC_CAN_IRQHandler
END
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
|
aegean-odyssey/mpmd_marlin_1.1.x
| 11,356
|
STM32Cube-1.10.1/Projects/STM32F091RC-Nucleo/Examples/IWDG/IWDG_WindowMode/MDK-ARM/startup_stm32f091xc.s
|
;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
;* File Name : startup_stm32f091xc.s
;* Author : MCD Application Team
;* Description : STM32F091xc/STM32F098xc devices vector table for MDK-ARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == Reset_Handler
;* - Set the vector table entries with the exceptions ISR address
;* - Branches to __main in the C library (which eventually
;* calls main()).
;* After Reset the CortexM0 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;* <<< Use Configuration Wizard in Context Menu >>>
;*******************************************************************************
;*
;* Redistribution and use in source and binary forms, with or without modification,
;* are permitted provided that the following conditions are met:
;* 1. Redistributions of source code must retain the above copyright notice,
;* this list of conditions and the following disclaimer.
;* 2. Redistributions in binary form must reproduce the above copyright notice,
;* this list of conditions and the following disclaimer in the documentation
;* and/or other materials provided with the distribution.
;* 3. Neither the name of STMicroelectronics nor the names of its contributors
;* may be used to endorse or promote products derived from this software
;* without specific prior written permission.
;*
;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
;
;*******************************************************************************
; Amount of memory (in bytes) allocated for Stack
; Tailor this value to your application needs
; <h> Stack Configuration
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Stack_Size EQU 0x400
AREA STACK, NOINIT, READWRITE, ALIGN=3
Stack_Mem SPACE Stack_Size
__initial_sp
; <h> Heap Configuration
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Heap_Size EQU 0x200
AREA HEAP, NOINIT, READWRITE, ALIGN=3
__heap_base
Heap_Mem SPACE Heap_Size
__heap_limit
PRESERVE8
THUMB
; Vector Table Mapped to Address 0 at Reset
AREA RESET, DATA, READONLY
EXPORT __Vectors
EXPORT __Vectors_End
EXPORT __Vectors_Size
__Vectors DCD __initial_sp ; Top of Stack
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window Watchdog
DCD PVD_VDDIO2_IRQHandler ; PVD through EXTI Line detect
DCD RTC_IRQHandler ; RTC through EXTI Line
DCD FLASH_IRQHandler ; FLASH
DCD RCC_CRS_IRQHandler ; RCC and CRS
DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
DCD TSC_IRQHandler ; TS
DCD DMA1_Ch1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler ; DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2
DCD DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler ; DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5
DCD ADC1_COMP_IRQHandler ; ADC1, COMP1 and COMP2
DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC
DCD TIM7_IRQHandler ; TIM7
DCD TIM14_IRQHandler ; TIM14
DCD TIM15_IRQHandler ; TIM15
DCD TIM16_IRQHandler ; TIM16
DCD TIM17_IRQHandler ; TIM17
DCD I2C1_IRQHandler ; I2C1
DCD I2C2_IRQHandler ; I2C2
DCD SPI1_IRQHandler ; SPI1
DCD SPI2_IRQHandler ; SPI2
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD USART3_8_IRQHandler ; USART3, USART4, USART5, USART6, USART7, USART8
DCD CEC_CAN_IRQHandler ; CEC and CAN
__Vectors_End
__Vectors_Size EQU __Vectors_End - __Vectors
AREA |.text|, CODE, READONLY
; Reset handler routine
Reset_Handler PROC
EXPORT Reset_Handler [WEAK]
IMPORT __main
IMPORT SystemInit
LDR R0, =SystemInit
BLX R0
LDR R0, =__main
BX R0
ENDP
; Dummy Exception Handlers (infinite loops which can be modified)
NMI_Handler PROC
EXPORT NMI_Handler [WEAK]
B .
ENDP
HardFault_Handler\
PROC
EXPORT HardFault_Handler [WEAK]
B .
ENDP
SVC_Handler PROC
EXPORT SVC_Handler [WEAK]
B .
ENDP
PendSV_Handler PROC
EXPORT PendSV_Handler [WEAK]
B .
ENDP
SysTick_Handler PROC
EXPORT SysTick_Handler [WEAK]
B .
ENDP
Default_Handler PROC
EXPORT WWDG_IRQHandler [WEAK]
EXPORT PVD_VDDIO2_IRQHandler [WEAK]
EXPORT RTC_IRQHandler [WEAK]
EXPORT FLASH_IRQHandler [WEAK]
EXPORT RCC_CRS_IRQHandler [WEAK]
EXPORT EXTI0_1_IRQHandler [WEAK]
EXPORT EXTI2_3_IRQHandler [WEAK]
EXPORT EXTI4_15_IRQHandler [WEAK]
EXPORT TSC_IRQHandler [WEAK]
EXPORT DMA1_Ch1_IRQHandler [WEAK]
EXPORT DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler [WEAK]
EXPORT DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler [WEAK]
EXPORT ADC1_COMP_IRQHandler [WEAK]
EXPORT TIM1_BRK_UP_TRG_COM_IRQHandler [WEAK]
EXPORT TIM1_CC_IRQHandler [WEAK]
EXPORT TIM2_IRQHandler [WEAK]
EXPORT TIM3_IRQHandler [WEAK]
EXPORT TIM6_DAC_IRQHandler [WEAK]
EXPORT TIM7_IRQHandler [WEAK]
EXPORT TIM14_IRQHandler [WEAK]
EXPORT TIM15_IRQHandler [WEAK]
EXPORT TIM16_IRQHandler [WEAK]
EXPORT TIM17_IRQHandler [WEAK]
EXPORT I2C1_IRQHandler [WEAK]
EXPORT I2C2_IRQHandler [WEAK]
EXPORT SPI1_IRQHandler [WEAK]
EXPORT SPI2_IRQHandler [WEAK]
EXPORT USART1_IRQHandler [WEAK]
EXPORT USART2_IRQHandler [WEAK]
EXPORT USART3_8_IRQHandler [WEAK]
EXPORT CEC_CAN_IRQHandler [WEAK]
WWDG_IRQHandler
PVD_VDDIO2_IRQHandler
RTC_IRQHandler
FLASH_IRQHandler
RCC_CRS_IRQHandler
EXTI0_1_IRQHandler
EXTI2_3_IRQHandler
EXTI4_15_IRQHandler
TSC_IRQHandler
DMA1_Ch1_IRQHandler
DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
ADC1_COMP_IRQHandler
TIM1_BRK_UP_TRG_COM_IRQHandler
TIM1_CC_IRQHandler
TIM2_IRQHandler
TIM3_IRQHandler
TIM6_DAC_IRQHandler
TIM7_IRQHandler
TIM14_IRQHandler
TIM15_IRQHandler
TIM16_IRQHandler
TIM17_IRQHandler
I2C1_IRQHandler
I2C2_IRQHandler
SPI1_IRQHandler
SPI2_IRQHandler
USART1_IRQHandler
USART2_IRQHandler
USART3_8_IRQHandler
CEC_CAN_IRQHandler
B .
ENDP
ALIGN
;*******************************************************************************
; User Stack and Heap initialization
;*******************************************************************************
IF :DEF:__MICROLIB
EXPORT __initial_sp
EXPORT __heap_base
EXPORT __heap_limit
ELSE
IMPORT __use_two_region_memory
EXPORT __user_initial_stackheap
__user_initial_stackheap
LDR R0, = Heap_Mem
LDR R1, =(Stack_Mem + Stack_Size)
LDR R2, = (Heap_Mem + Heap_Size)
LDR R3, = Stack_Mem
BX LR
ALIGN
ENDIF
END
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
|
aegean-odyssey/mpmd_marlin_1.1.x
| 10,745
|
STM32Cube-1.10.1/Projects/STM32F091RC-Nucleo/Examples/IWDG/IWDG_WindowMode/SW4STM32/startup_stm32f091xc.s
|
/**
******************************************************************************
* @file startup_stm32f091xc.s
* @author MCD Application Team
* @brief STM32F091xC devices vector table for GCC toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M0 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
.syntax unified
.cpu cortex-m0
.fpu softvfp
.thumb
.global g_pfnVectors
.global Default_Handler
/* start address for the initialization values of the .data section.
defined in linker script */
.word _sidata
/* start address for the .data section. defined in linker script */
.word _sdata
/* end address for the .data section. defined in linker script */
.word _edata
/* start address for the .bss section. defined in linker script */
.word _sbss
/* end address for the .bss section. defined in linker script */
.word _ebss
.section .text.Reset_Handler
.weak Reset_Handler
.type Reset_Handler, %function
Reset_Handler:
ldr r0, =_estack
mov sp, r0 /* set stack pointer */
/* Copy the data segment initializers from flash to SRAM */
movs r1, #0
b LoopCopyDataInit
CopyDataInit:
ldr r3, =_sidata
ldr r3, [r3, r1]
str r3, [r0, r1]
adds r1, r1, #4
LoopCopyDataInit:
ldr r0, =_sdata
ldr r3, =_edata
adds r2, r0, r1
cmp r2, r3
bcc CopyDataInit
ldr r2, =_sbss
b LoopFillZerobss
/* Zero fill the bss segment. */
FillZerobss:
movs r3, #0
str r3, [r2]
adds r2, r2, #4
LoopFillZerobss:
ldr r3, = _ebss
cmp r2, r3
bcc FillZerobss
/* Call the clock system intitialization function.*/
bl SystemInit
/* Call static constructors */
bl __libc_init_array
/* Call the application's entry point.*/
bl main
LoopForever:
b LoopForever
.size Reset_Handler, .-Reset_Handler
/**
* @brief This is the code that gets called when the processor receives an
* unexpected interrupt. This simply enters an infinite loop, preserving
* the system state for examination by a debugger.
*
* @param None
* @retval : None
*/
.section .text.Default_Handler,"ax",%progbits
Default_Handler:
Infinite_Loop:
b Infinite_Loop
.size Default_Handler, .-Default_Handler
/******************************************************************************
*
* The minimal vector table for a Cortex M0. Note that the proper constructs
* must be placed on this to ensure that it ends up at physical address
* 0x0000.0000.
*
******************************************************************************/
.section .isr_vector,"a",%progbits
.type g_pfnVectors, %object
.size g_pfnVectors, .-g_pfnVectors
g_pfnVectors:
.word _estack
.word Reset_Handler
.word NMI_Handler
.word HardFault_Handler
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word SVC_Handler
.word 0
.word 0
.word PendSV_Handler
.word SysTick_Handler
.word WWDG_IRQHandler /* Window WatchDog */
.word PVD_VDDIO2_IRQHandler /* PVD and VDDIO2 through EXTI Line detect */
.word RTC_IRQHandler /* RTC through the EXTI line */
.word FLASH_IRQHandler /* FLASH */
.word RCC_CRS_IRQHandler /* RCC and CRS */
.word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */
.word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */
.word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */
.word TSC_IRQHandler /* TSC */
.word DMA1_Ch1_IRQHandler /* DMA1 Channel 1 */
.word DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler /* DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2 */
.word DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler /* DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5 */
.word ADC1_COMP_IRQHandler /* ADC1, COMP1 and COMP2 */
.word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */
.word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
.word TIM2_IRQHandler /* TIM2 */
.word TIM3_IRQHandler /* TIM3 */
.word TIM6_DAC_IRQHandler /* TIM6 and DAC */
.word TIM7_IRQHandler /* TIM7 */
.word TIM14_IRQHandler /* TIM14 */
.word TIM15_IRQHandler /* TIM15 */
.word TIM16_IRQHandler /* TIM16 */
.word TIM17_IRQHandler /* TIM17 */
.word I2C1_IRQHandler /* I2C1 */
.word I2C2_IRQHandler /* I2C2 */
.word SPI1_IRQHandler /* SPI1 */
.word SPI2_IRQHandler /* SPI2 */
.word USART1_IRQHandler /* USART1 */
.word USART2_IRQHandler /* USART2 */
.word USART3_8_IRQHandler /* USART3, USART4, USART5, USART6, USART7, USART8 */
.word CEC_CAN_IRQHandler /* CEC and CAN */
/*******************************************************************************
*
* Provide weak aliases for each Exception handler to the Default_Handler.
* As they are weak aliases, any function with the same name will override
* this definition.
*
*******************************************************************************/
.weak NMI_Handler
.thumb_set NMI_Handler,Default_Handler
.weak HardFault_Handler
.thumb_set HardFault_Handler,Default_Handler
.weak SVC_Handler
.thumb_set SVC_Handler,Default_Handler
.weak PendSV_Handler
.thumb_set PendSV_Handler,Default_Handler
.weak SysTick_Handler
.thumb_set SysTick_Handler,Default_Handler
.weak WWDG_IRQHandler
.thumb_set WWDG_IRQHandler,Default_Handler
.weak PVD_VDDIO2_IRQHandler
.thumb_set PVD_VDDIO2_IRQHandler,Default_Handler
.weak RTC_IRQHandler
.thumb_set RTC_IRQHandler,Default_Handler
.weak FLASH_IRQHandler
.thumb_set FLASH_IRQHandler,Default_Handler
.weak RCC_CRS_IRQHandler
.thumb_set RCC_CRS_IRQHandler,Default_Handler
.weak EXTI0_1_IRQHandler
.thumb_set EXTI0_1_IRQHandler,Default_Handler
.weak EXTI2_3_IRQHandler
.thumb_set EXTI2_3_IRQHandler,Default_Handler
.weak EXTI4_15_IRQHandler
.thumb_set EXTI4_15_IRQHandler,Default_Handler
.weak TSC_IRQHandler
.thumb_set TSC_IRQHandler,Default_Handler
.weak DMA1_Ch1_IRQHandler
.thumb_set DMA1_Ch1_IRQHandler,Default_Handler
.weak DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
.thumb_set DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler,Default_Handler
.weak DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
.thumb_set DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler,Default_Handler
.weak ADC1_COMP_IRQHandler
.thumb_set ADC1_COMP_IRQHandler,Default_Handler
.weak TIM1_BRK_UP_TRG_COM_IRQHandler
.thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
.weak TIM1_CC_IRQHandler
.thumb_set TIM1_CC_IRQHandler,Default_Handler
.weak TIM2_IRQHandler
.thumb_set TIM2_IRQHandler,Default_Handler
.weak TIM3_IRQHandler
.thumb_set TIM3_IRQHandler,Default_Handler
.weak TIM6_DAC_IRQHandler
.thumb_set TIM6_DAC_IRQHandler,Default_Handler
.weak TIM7_IRQHandler
.thumb_set TIM7_IRQHandler,Default_Handler
.weak TIM14_IRQHandler
.thumb_set TIM14_IRQHandler,Default_Handler
.weak TIM15_IRQHandler
.thumb_set TIM15_IRQHandler,Default_Handler
.weak TIM16_IRQHandler
.thumb_set TIM16_IRQHandler,Default_Handler
.weak TIM17_IRQHandler
.thumb_set TIM17_IRQHandler,Default_Handler
.weak I2C1_IRQHandler
.thumb_set I2C1_IRQHandler,Default_Handler
.weak I2C2_IRQHandler
.thumb_set I2C2_IRQHandler,Default_Handler
.weak SPI1_IRQHandler
.thumb_set SPI1_IRQHandler,Default_Handler
.weak SPI2_IRQHandler
.thumb_set SPI2_IRQHandler,Default_Handler
.weak USART1_IRQHandler
.thumb_set USART1_IRQHandler,Default_Handler
.weak USART2_IRQHandler
.thumb_set USART2_IRQHandler,Default_Handler
.weak USART3_8_IRQHandler
.thumb_set USART3_8_IRQHandler,Default_Handler
.weak CEC_CAN_IRQHandler
.thumb_set CEC_CAN_IRQHandler,Default_Handler
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
aegean-odyssey/mpmd_marlin_1.1.x
| 11,410
|
STM32Cube-1.10.1/Projects/STM32F091RC-Nucleo/Examples/IWDG/IWDG_WindowMode/EWARM/startup_stm32f091xc.s
|
;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
;* File Name : startup_stm32f091xc.s
;* Author : MCD Application Team
;* Description : STM32F091xc/STM32F098xc devices vector table for EWARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == __iar_program_start,
;* - Set the vector table entries with the exceptions ISR
;* address,
;* - Branches to main in the C library (which eventually
;* calls main()).
;* After Reset the Cortex-M0 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;*******************************************************************************
;*
;* Redistribution and use in source and binary forms, with or without modification,
;* are permitted provided that the following conditions are met:
;* 1. Redistributions of source code must retain the above copyright notice,
;* this list of conditions and the following disclaimer.
;* 2. Redistributions in binary form must reproduce the above copyright notice,
;* this list of conditions and the following disclaimer in the documentation
;* and/or other materials provided with the distribution.
;* 3. Neither the name of STMicroelectronics nor the names of its contributors
;* may be used to endorse or promote products derived from this software
;* without specific prior written permission.
;*
;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
;*
;*******************************************************************************
;
;
; The modules in this file are included in the libraries, and may be replaced
; by any user-defined modules that define the PUBLIC symbol _program_start or
; a user defined start symbol.
; To override the cstartup defined in the library, simply add your modified
; version to the workbench project.
;
; The vector table is normally located at address 0.
; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
; The name "__vector_table" has special meaning for C-SPY:
; it is where the SP start value is found, and the NVIC vector
; table register (VTOR) is initialized to this address if != 0.
;
; Cortex-M version
;
MODULE ?cstartup
;; Forward declaration of sections.
SECTION CSTACK:DATA:NOROOT(3)
SECTION .intvec:CODE:NOROOT(2)
EXTERN __iar_program_start
EXTERN SystemInit
PUBLIC __vector_table
DATA
__vector_table
DCD sfe(CSTACK)
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window Watchdog
DCD PVD_VDDIO2_IRQHandler ; PVD and VDDIO2 through EXTI Line detect
DCD RTC_IRQHandler ; RTC through EXTI Line
DCD FLASH_IRQHandler ; FLASH
DCD RCC_CRS_IRQHandler ; RCC and CRS
DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
DCD TSC_IRQHandler ; TS
DCD DMA1_Ch1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler ; DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2
DCD DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler ; DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5
DCD ADC1_COMP_IRQHandler ; ADC1, COMP1 and COMP2
DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC
DCD TIM7_IRQHandler ; TIM7
DCD TIM14_IRQHandler ; TIM14
DCD TIM15_IRQHandler ; TIM15
DCD TIM16_IRQHandler ; TIM16
DCD TIM17_IRQHandler ; TIM17
DCD I2C1_IRQHandler ; I2C1
DCD I2C2_IRQHandler ; I2C2
DCD SPI1_IRQHandler ; SPI1
DCD SPI2_IRQHandler ; SPI2
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD USART3_8_IRQHandler ; USART3, USART4, USART5, USART6, USART7, USART8
DCD CEC_CAN_IRQHandler ; CEC and CAN
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Default interrupt handlers.
;;
THUMB
PUBWEAK Reset_Handler
SECTION .text:CODE:NOROOT:REORDER(2)
Reset_Handler
LDR R0, =SystemInit
BLX R0
LDR R0, =__iar_program_start
BX R0
PUBWEAK NMI_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
NMI_Handler
B NMI_Handler
PUBWEAK HardFault_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
HardFault_Handler
B HardFault_Handler
PUBWEAK SVC_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
SVC_Handler
B SVC_Handler
PUBWEAK PendSV_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
PendSV_Handler
B PendSV_Handler
PUBWEAK SysTick_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
SysTick_Handler
B SysTick_Handler
PUBWEAK WWDG_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
WWDG_IRQHandler
B WWDG_IRQHandler
PUBWEAK PVD_VDDIO2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
PVD_VDDIO2_IRQHandler
B PVD_VDDIO2_IRQHandler
PUBWEAK RTC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
RTC_IRQHandler
B RTC_IRQHandler
PUBWEAK FLASH_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
FLASH_IRQHandler
B FLASH_IRQHandler
PUBWEAK RCC_CRS_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
RCC_CRS_IRQHandler
B RCC_CRS_IRQHandler
PUBWEAK EXTI0_1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI0_1_IRQHandler
B EXTI0_1_IRQHandler
PUBWEAK EXTI2_3_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI2_3_IRQHandler
B EXTI2_3_IRQHandler
PUBWEAK EXTI4_15_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI4_15_IRQHandler
B EXTI4_15_IRQHandler
PUBWEAK TSC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TSC_IRQHandler
B TSC_IRQHandler
PUBWEAK DMA1_Ch1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Ch1_IRQHandler
B DMA1_Ch1_IRQHandler
PUBWEAK DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
B DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
PUBWEAK DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
B DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
PUBWEAK ADC1_COMP_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
ADC1_COMP_IRQHandler
B ADC1_COMP_IRQHandler
PUBWEAK TIM1_BRK_UP_TRG_COM_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM1_BRK_UP_TRG_COM_IRQHandler
B TIM1_BRK_UP_TRG_COM_IRQHandler
PUBWEAK TIM1_CC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM1_CC_IRQHandler
B TIM1_CC_IRQHandler
PUBWEAK TIM2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM2_IRQHandler
B TIM2_IRQHandler
PUBWEAK TIM3_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM3_IRQHandler
B TIM3_IRQHandler
PUBWEAK TIM6_DAC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM6_DAC_IRQHandler
B TIM6_DAC_IRQHandler
PUBWEAK TIM7_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM7_IRQHandler
B TIM7_IRQHandler
PUBWEAK TIM14_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM14_IRQHandler
B TIM14_IRQHandler
PUBWEAK TIM15_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM15_IRQHandler
B TIM15_IRQHandler
PUBWEAK TIM16_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM16_IRQHandler
B TIM16_IRQHandler
PUBWEAK TIM17_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM17_IRQHandler
B TIM17_IRQHandler
PUBWEAK I2C1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
I2C1_IRQHandler
B I2C1_IRQHandler
PUBWEAK I2C2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
I2C2_IRQHandler
B I2C2_IRQHandler
PUBWEAK SPI1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
SPI1_IRQHandler
B SPI1_IRQHandler
PUBWEAK SPI2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
SPI2_IRQHandler
B SPI2_IRQHandler
PUBWEAK USART1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
USART1_IRQHandler
B USART1_IRQHandler
PUBWEAK USART2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
USART2_IRQHandler
B USART2_IRQHandler
PUBWEAK USART3_8_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
USART3_8_IRQHandler
B USART3_8_IRQHandler
PUBWEAK CEC_CAN_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
CEC_CAN_IRQHandler
B CEC_CAN_IRQHandler
END
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
|
aegean-odyssey/mpmd_marlin_1.1.x
| 11,356
|
STM32Cube-1.10.1/Projects/STM32F091RC-Nucleo/Examples/HAL/HAL_TimeBase_RTC_ALARM/MDK-ARM/startup_stm32f091xc.s
|
;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
;* File Name : startup_stm32f091xc.s
;* Author : MCD Application Team
;* Description : STM32F091xc/STM32F098xc devices vector table for MDK-ARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == Reset_Handler
;* - Set the vector table entries with the exceptions ISR address
;* - Branches to __main in the C library (which eventually
;* calls main()).
;* After Reset the CortexM0 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;* <<< Use Configuration Wizard in Context Menu >>>
;*******************************************************************************
;*
;* Redistribution and use in source and binary forms, with or without modification,
;* are permitted provided that the following conditions are met:
;* 1. Redistributions of source code must retain the above copyright notice,
;* this list of conditions and the following disclaimer.
;* 2. Redistributions in binary form must reproduce the above copyright notice,
;* this list of conditions and the following disclaimer in the documentation
;* and/or other materials provided with the distribution.
;* 3. Neither the name of STMicroelectronics nor the names of its contributors
;* may be used to endorse or promote products derived from this software
;* without specific prior written permission.
;*
;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
;
;*******************************************************************************
; Amount of memory (in bytes) allocated for Stack
; Tailor this value to your application needs
; <h> Stack Configuration
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Stack_Size EQU 0x400
AREA STACK, NOINIT, READWRITE, ALIGN=3
Stack_Mem SPACE Stack_Size
__initial_sp
; <h> Heap Configuration
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Heap_Size EQU 0x200
AREA HEAP, NOINIT, READWRITE, ALIGN=3
__heap_base
Heap_Mem SPACE Heap_Size
__heap_limit
PRESERVE8
THUMB
; Vector Table Mapped to Address 0 at Reset
AREA RESET, DATA, READONLY
EXPORT __Vectors
EXPORT __Vectors_End
EXPORT __Vectors_Size
__Vectors DCD __initial_sp ; Top of Stack
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window Watchdog
DCD PVD_VDDIO2_IRQHandler ; PVD through EXTI Line detect
DCD RTC_IRQHandler ; RTC through EXTI Line
DCD FLASH_IRQHandler ; FLASH
DCD RCC_CRS_IRQHandler ; RCC and CRS
DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
DCD TSC_IRQHandler ; TS
DCD DMA1_Ch1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler ; DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2
DCD DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler ; DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5
DCD ADC1_COMP_IRQHandler ; ADC1, COMP1 and COMP2
DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC
DCD TIM7_IRQHandler ; TIM7
DCD TIM14_IRQHandler ; TIM14
DCD TIM15_IRQHandler ; TIM15
DCD TIM16_IRQHandler ; TIM16
DCD TIM17_IRQHandler ; TIM17
DCD I2C1_IRQHandler ; I2C1
DCD I2C2_IRQHandler ; I2C2
DCD SPI1_IRQHandler ; SPI1
DCD SPI2_IRQHandler ; SPI2
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD USART3_8_IRQHandler ; USART3, USART4, USART5, USART6, USART7, USART8
DCD CEC_CAN_IRQHandler ; CEC and CAN
__Vectors_End
__Vectors_Size EQU __Vectors_End - __Vectors
AREA |.text|, CODE, READONLY
; Reset handler routine
Reset_Handler PROC
EXPORT Reset_Handler [WEAK]
IMPORT __main
IMPORT SystemInit
LDR R0, =SystemInit
BLX R0
LDR R0, =__main
BX R0
ENDP
; Dummy Exception Handlers (infinite loops which can be modified)
NMI_Handler PROC
EXPORT NMI_Handler [WEAK]
B .
ENDP
HardFault_Handler\
PROC
EXPORT HardFault_Handler [WEAK]
B .
ENDP
SVC_Handler PROC
EXPORT SVC_Handler [WEAK]
B .
ENDP
PendSV_Handler PROC
EXPORT PendSV_Handler [WEAK]
B .
ENDP
SysTick_Handler PROC
EXPORT SysTick_Handler [WEAK]
B .
ENDP
Default_Handler PROC
EXPORT WWDG_IRQHandler [WEAK]
EXPORT PVD_VDDIO2_IRQHandler [WEAK]
EXPORT RTC_IRQHandler [WEAK]
EXPORT FLASH_IRQHandler [WEAK]
EXPORT RCC_CRS_IRQHandler [WEAK]
EXPORT EXTI0_1_IRQHandler [WEAK]
EXPORT EXTI2_3_IRQHandler [WEAK]
EXPORT EXTI4_15_IRQHandler [WEAK]
EXPORT TSC_IRQHandler [WEAK]
EXPORT DMA1_Ch1_IRQHandler [WEAK]
EXPORT DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler [WEAK]
EXPORT DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler [WEAK]
EXPORT ADC1_COMP_IRQHandler [WEAK]
EXPORT TIM1_BRK_UP_TRG_COM_IRQHandler [WEAK]
EXPORT TIM1_CC_IRQHandler [WEAK]
EXPORT TIM2_IRQHandler [WEAK]
EXPORT TIM3_IRQHandler [WEAK]
EXPORT TIM6_DAC_IRQHandler [WEAK]
EXPORT TIM7_IRQHandler [WEAK]
EXPORT TIM14_IRQHandler [WEAK]
EXPORT TIM15_IRQHandler [WEAK]
EXPORT TIM16_IRQHandler [WEAK]
EXPORT TIM17_IRQHandler [WEAK]
EXPORT I2C1_IRQHandler [WEAK]
EXPORT I2C2_IRQHandler [WEAK]
EXPORT SPI1_IRQHandler [WEAK]
EXPORT SPI2_IRQHandler [WEAK]
EXPORT USART1_IRQHandler [WEAK]
EXPORT USART2_IRQHandler [WEAK]
EXPORT USART3_8_IRQHandler [WEAK]
EXPORT CEC_CAN_IRQHandler [WEAK]
WWDG_IRQHandler
PVD_VDDIO2_IRQHandler
RTC_IRQHandler
FLASH_IRQHandler
RCC_CRS_IRQHandler
EXTI0_1_IRQHandler
EXTI2_3_IRQHandler
EXTI4_15_IRQHandler
TSC_IRQHandler
DMA1_Ch1_IRQHandler
DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
ADC1_COMP_IRQHandler
TIM1_BRK_UP_TRG_COM_IRQHandler
TIM1_CC_IRQHandler
TIM2_IRQHandler
TIM3_IRQHandler
TIM6_DAC_IRQHandler
TIM7_IRQHandler
TIM14_IRQHandler
TIM15_IRQHandler
TIM16_IRQHandler
TIM17_IRQHandler
I2C1_IRQHandler
I2C2_IRQHandler
SPI1_IRQHandler
SPI2_IRQHandler
USART1_IRQHandler
USART2_IRQHandler
USART3_8_IRQHandler
CEC_CAN_IRQHandler
B .
ENDP
ALIGN
;*******************************************************************************
; User Stack and Heap initialization
;*******************************************************************************
IF :DEF:__MICROLIB
EXPORT __initial_sp
EXPORT __heap_base
EXPORT __heap_limit
ELSE
IMPORT __use_two_region_memory
EXPORT __user_initial_stackheap
__user_initial_stackheap
LDR R0, = Heap_Mem
LDR R1, =(Stack_Mem + Stack_Size)
LDR R2, = (Heap_Mem + Heap_Size)
LDR R3, = Stack_Mem
BX LR
ALIGN
ENDIF
END
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
|
aegean-odyssey/mpmd_marlin_1.1.x
| 10,745
|
STM32Cube-1.10.1/Projects/STM32F091RC-Nucleo/Examples/HAL/HAL_TimeBase_RTC_ALARM/SW4STM32/startup_stm32f091xc.s
|
/**
******************************************************************************
* @file startup_stm32f091xc.s
* @author MCD Application Team
* @brief STM32F091xC devices vector table for GCC toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M0 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
.syntax unified
.cpu cortex-m0
.fpu softvfp
.thumb
.global g_pfnVectors
.global Default_Handler
/* start address for the initialization values of the .data section.
defined in linker script */
.word _sidata
/* start address for the .data section. defined in linker script */
.word _sdata
/* end address for the .data section. defined in linker script */
.word _edata
/* start address for the .bss section. defined in linker script */
.word _sbss
/* end address for the .bss section. defined in linker script */
.word _ebss
.section .text.Reset_Handler
.weak Reset_Handler
.type Reset_Handler, %function
Reset_Handler:
ldr r0, =_estack
mov sp, r0 /* set stack pointer */
/* Copy the data segment initializers from flash to SRAM */
movs r1, #0
b LoopCopyDataInit
CopyDataInit:
ldr r3, =_sidata
ldr r3, [r3, r1]
str r3, [r0, r1]
adds r1, r1, #4
LoopCopyDataInit:
ldr r0, =_sdata
ldr r3, =_edata
adds r2, r0, r1
cmp r2, r3
bcc CopyDataInit
ldr r2, =_sbss
b LoopFillZerobss
/* Zero fill the bss segment. */
FillZerobss:
movs r3, #0
str r3, [r2]
adds r2, r2, #4
LoopFillZerobss:
ldr r3, = _ebss
cmp r2, r3
bcc FillZerobss
/* Call the clock system intitialization function.*/
bl SystemInit
/* Call static constructors */
bl __libc_init_array
/* Call the application's entry point.*/
bl main
LoopForever:
b LoopForever
.size Reset_Handler, .-Reset_Handler
/**
* @brief This is the code that gets called when the processor receives an
* unexpected interrupt. This simply enters an infinite loop, preserving
* the system state for examination by a debugger.
*
* @param None
* @retval : None
*/
.section .text.Default_Handler,"ax",%progbits
Default_Handler:
Infinite_Loop:
b Infinite_Loop
.size Default_Handler, .-Default_Handler
/******************************************************************************
*
* The minimal vector table for a Cortex M0. Note that the proper constructs
* must be placed on this to ensure that it ends up at physical address
* 0x0000.0000.
*
******************************************************************************/
.section .isr_vector,"a",%progbits
.type g_pfnVectors, %object
.size g_pfnVectors, .-g_pfnVectors
g_pfnVectors:
.word _estack
.word Reset_Handler
.word NMI_Handler
.word HardFault_Handler
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word SVC_Handler
.word 0
.word 0
.word PendSV_Handler
.word SysTick_Handler
.word WWDG_IRQHandler /* Window WatchDog */
.word PVD_VDDIO2_IRQHandler /* PVD and VDDIO2 through EXTI Line detect */
.word RTC_IRQHandler /* RTC through the EXTI line */
.word FLASH_IRQHandler /* FLASH */
.word RCC_CRS_IRQHandler /* RCC and CRS */
.word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */
.word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */
.word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */
.word TSC_IRQHandler /* TSC */
.word DMA1_Ch1_IRQHandler /* DMA1 Channel 1 */
.word DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler /* DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2 */
.word DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler /* DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5 */
.word ADC1_COMP_IRQHandler /* ADC1, COMP1 and COMP2 */
.word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */
.word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
.word TIM2_IRQHandler /* TIM2 */
.word TIM3_IRQHandler /* TIM3 */
.word TIM6_DAC_IRQHandler /* TIM6 and DAC */
.word TIM7_IRQHandler /* TIM7 */
.word TIM14_IRQHandler /* TIM14 */
.word TIM15_IRQHandler /* TIM15 */
.word TIM16_IRQHandler /* TIM16 */
.word TIM17_IRQHandler /* TIM17 */
.word I2C1_IRQHandler /* I2C1 */
.word I2C2_IRQHandler /* I2C2 */
.word SPI1_IRQHandler /* SPI1 */
.word SPI2_IRQHandler /* SPI2 */
.word USART1_IRQHandler /* USART1 */
.word USART2_IRQHandler /* USART2 */
.word USART3_8_IRQHandler /* USART3, USART4, USART5, USART6, USART7, USART8 */
.word CEC_CAN_IRQHandler /* CEC and CAN */
/*******************************************************************************
*
* Provide weak aliases for each Exception handler to the Default_Handler.
* As they are weak aliases, any function with the same name will override
* this definition.
*
*******************************************************************************/
.weak NMI_Handler
.thumb_set NMI_Handler,Default_Handler
.weak HardFault_Handler
.thumb_set HardFault_Handler,Default_Handler
.weak SVC_Handler
.thumb_set SVC_Handler,Default_Handler
.weak PendSV_Handler
.thumb_set PendSV_Handler,Default_Handler
.weak SysTick_Handler
.thumb_set SysTick_Handler,Default_Handler
.weak WWDG_IRQHandler
.thumb_set WWDG_IRQHandler,Default_Handler
.weak PVD_VDDIO2_IRQHandler
.thumb_set PVD_VDDIO2_IRQHandler,Default_Handler
.weak RTC_IRQHandler
.thumb_set RTC_IRQHandler,Default_Handler
.weak FLASH_IRQHandler
.thumb_set FLASH_IRQHandler,Default_Handler
.weak RCC_CRS_IRQHandler
.thumb_set RCC_CRS_IRQHandler,Default_Handler
.weak EXTI0_1_IRQHandler
.thumb_set EXTI0_1_IRQHandler,Default_Handler
.weak EXTI2_3_IRQHandler
.thumb_set EXTI2_3_IRQHandler,Default_Handler
.weak EXTI4_15_IRQHandler
.thumb_set EXTI4_15_IRQHandler,Default_Handler
.weak TSC_IRQHandler
.thumb_set TSC_IRQHandler,Default_Handler
.weak DMA1_Ch1_IRQHandler
.thumb_set DMA1_Ch1_IRQHandler,Default_Handler
.weak DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
.thumb_set DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler,Default_Handler
.weak DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
.thumb_set DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler,Default_Handler
.weak ADC1_COMP_IRQHandler
.thumb_set ADC1_COMP_IRQHandler,Default_Handler
.weak TIM1_BRK_UP_TRG_COM_IRQHandler
.thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
.weak TIM1_CC_IRQHandler
.thumb_set TIM1_CC_IRQHandler,Default_Handler
.weak TIM2_IRQHandler
.thumb_set TIM2_IRQHandler,Default_Handler
.weak TIM3_IRQHandler
.thumb_set TIM3_IRQHandler,Default_Handler
.weak TIM6_DAC_IRQHandler
.thumb_set TIM6_DAC_IRQHandler,Default_Handler
.weak TIM7_IRQHandler
.thumb_set TIM7_IRQHandler,Default_Handler
.weak TIM14_IRQHandler
.thumb_set TIM14_IRQHandler,Default_Handler
.weak TIM15_IRQHandler
.thumb_set TIM15_IRQHandler,Default_Handler
.weak TIM16_IRQHandler
.thumb_set TIM16_IRQHandler,Default_Handler
.weak TIM17_IRQHandler
.thumb_set TIM17_IRQHandler,Default_Handler
.weak I2C1_IRQHandler
.thumb_set I2C1_IRQHandler,Default_Handler
.weak I2C2_IRQHandler
.thumb_set I2C2_IRQHandler,Default_Handler
.weak SPI1_IRQHandler
.thumb_set SPI1_IRQHandler,Default_Handler
.weak SPI2_IRQHandler
.thumb_set SPI2_IRQHandler,Default_Handler
.weak USART1_IRQHandler
.thumb_set USART1_IRQHandler,Default_Handler
.weak USART2_IRQHandler
.thumb_set USART2_IRQHandler,Default_Handler
.weak USART3_8_IRQHandler
.thumb_set USART3_8_IRQHandler,Default_Handler
.weak CEC_CAN_IRQHandler
.thumb_set CEC_CAN_IRQHandler,Default_Handler
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
aegean-odyssey/mpmd_marlin_1.1.x
| 11,410
|
STM32Cube-1.10.1/Projects/STM32F091RC-Nucleo/Examples/HAL/HAL_TimeBase_RTC_ALARM/EWARM/startup_stm32f091xc.s
|
;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
;* File Name : startup_stm32f091xc.s
;* Author : MCD Application Team
;* Description : STM32F091xc/STM32F098xc devices vector table for EWARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == __iar_program_start,
;* - Set the vector table entries with the exceptions ISR
;* address,
;* - Branches to main in the C library (which eventually
;* calls main()).
;* After Reset the Cortex-M0 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;*******************************************************************************
;*
;* Redistribution and use in source and binary forms, with or without modification,
;* are permitted provided that the following conditions are met:
;* 1. Redistributions of source code must retain the above copyright notice,
;* this list of conditions and the following disclaimer.
;* 2. Redistributions in binary form must reproduce the above copyright notice,
;* this list of conditions and the following disclaimer in the documentation
;* and/or other materials provided with the distribution.
;* 3. Neither the name of STMicroelectronics nor the names of its contributors
;* may be used to endorse or promote products derived from this software
;* without specific prior written permission.
;*
;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
;*
;*******************************************************************************
;
;
; The modules in this file are included in the libraries, and may be replaced
; by any user-defined modules that define the PUBLIC symbol _program_start or
; a user defined start symbol.
; To override the cstartup defined in the library, simply add your modified
; version to the workbench project.
;
; The vector table is normally located at address 0.
; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
; The name "__vector_table" has special meaning for C-SPY:
; it is where the SP start value is found, and the NVIC vector
; table register (VTOR) is initialized to this address if != 0.
;
; Cortex-M version
;
MODULE ?cstartup
;; Forward declaration of sections.
SECTION CSTACK:DATA:NOROOT(3)
SECTION .intvec:CODE:NOROOT(2)
EXTERN __iar_program_start
EXTERN SystemInit
PUBLIC __vector_table
DATA
__vector_table
DCD sfe(CSTACK)
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window Watchdog
DCD PVD_VDDIO2_IRQHandler ; PVD and VDDIO2 through EXTI Line detect
DCD RTC_IRQHandler ; RTC through EXTI Line
DCD FLASH_IRQHandler ; FLASH
DCD RCC_CRS_IRQHandler ; RCC and CRS
DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
DCD TSC_IRQHandler ; TS
DCD DMA1_Ch1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler ; DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2
DCD DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler ; DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5
DCD ADC1_COMP_IRQHandler ; ADC1, COMP1 and COMP2
DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC
DCD TIM7_IRQHandler ; TIM7
DCD TIM14_IRQHandler ; TIM14
DCD TIM15_IRQHandler ; TIM15
DCD TIM16_IRQHandler ; TIM16
DCD TIM17_IRQHandler ; TIM17
DCD I2C1_IRQHandler ; I2C1
DCD I2C2_IRQHandler ; I2C2
DCD SPI1_IRQHandler ; SPI1
DCD SPI2_IRQHandler ; SPI2
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD USART3_8_IRQHandler ; USART3, USART4, USART5, USART6, USART7, USART8
DCD CEC_CAN_IRQHandler ; CEC and CAN
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Default interrupt handlers.
;;
THUMB
PUBWEAK Reset_Handler
SECTION .text:CODE:NOROOT:REORDER(2)
Reset_Handler
LDR R0, =SystemInit
BLX R0
LDR R0, =__iar_program_start
BX R0
PUBWEAK NMI_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
NMI_Handler
B NMI_Handler
PUBWEAK HardFault_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
HardFault_Handler
B HardFault_Handler
PUBWEAK SVC_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
SVC_Handler
B SVC_Handler
PUBWEAK PendSV_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
PendSV_Handler
B PendSV_Handler
PUBWEAK SysTick_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
SysTick_Handler
B SysTick_Handler
PUBWEAK WWDG_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
WWDG_IRQHandler
B WWDG_IRQHandler
PUBWEAK PVD_VDDIO2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
PVD_VDDIO2_IRQHandler
B PVD_VDDIO2_IRQHandler
PUBWEAK RTC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
RTC_IRQHandler
B RTC_IRQHandler
PUBWEAK FLASH_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
FLASH_IRQHandler
B FLASH_IRQHandler
PUBWEAK RCC_CRS_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
RCC_CRS_IRQHandler
B RCC_CRS_IRQHandler
PUBWEAK EXTI0_1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI0_1_IRQHandler
B EXTI0_1_IRQHandler
PUBWEAK EXTI2_3_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI2_3_IRQHandler
B EXTI2_3_IRQHandler
PUBWEAK EXTI4_15_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI4_15_IRQHandler
B EXTI4_15_IRQHandler
PUBWEAK TSC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TSC_IRQHandler
B TSC_IRQHandler
PUBWEAK DMA1_Ch1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Ch1_IRQHandler
B DMA1_Ch1_IRQHandler
PUBWEAK DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
B DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
PUBWEAK DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
B DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
PUBWEAK ADC1_COMP_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
ADC1_COMP_IRQHandler
B ADC1_COMP_IRQHandler
PUBWEAK TIM1_BRK_UP_TRG_COM_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM1_BRK_UP_TRG_COM_IRQHandler
B TIM1_BRK_UP_TRG_COM_IRQHandler
PUBWEAK TIM1_CC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM1_CC_IRQHandler
B TIM1_CC_IRQHandler
PUBWEAK TIM2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM2_IRQHandler
B TIM2_IRQHandler
PUBWEAK TIM3_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM3_IRQHandler
B TIM3_IRQHandler
PUBWEAK TIM6_DAC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM6_DAC_IRQHandler
B TIM6_DAC_IRQHandler
PUBWEAK TIM7_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM7_IRQHandler
B TIM7_IRQHandler
PUBWEAK TIM14_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM14_IRQHandler
B TIM14_IRQHandler
PUBWEAK TIM15_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM15_IRQHandler
B TIM15_IRQHandler
PUBWEAK TIM16_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM16_IRQHandler
B TIM16_IRQHandler
PUBWEAK TIM17_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM17_IRQHandler
B TIM17_IRQHandler
PUBWEAK I2C1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
I2C1_IRQHandler
B I2C1_IRQHandler
PUBWEAK I2C2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
I2C2_IRQHandler
B I2C2_IRQHandler
PUBWEAK SPI1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
SPI1_IRQHandler
B SPI1_IRQHandler
PUBWEAK SPI2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
SPI2_IRQHandler
B SPI2_IRQHandler
PUBWEAK USART1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
USART1_IRQHandler
B USART1_IRQHandler
PUBWEAK USART2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
USART2_IRQHandler
B USART2_IRQHandler
PUBWEAK USART3_8_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
USART3_8_IRQHandler
B USART3_8_IRQHandler
PUBWEAK CEC_CAN_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
CEC_CAN_IRQHandler
B CEC_CAN_IRQHandler
END
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
|
aegean-odyssey/mpmd_marlin_1.1.x
| 11,356
|
STM32Cube-1.10.1/Projects/STM32F091RC-Nucleo/Examples/HAL/HAL_TimeBase_RTC_WKUP/MDK-ARM/startup_stm32f091xc.s
|
;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
;* File Name : startup_stm32f091xc.s
;* Author : MCD Application Team
;* Description : STM32F091xc/STM32F098xc devices vector table for MDK-ARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == Reset_Handler
;* - Set the vector table entries with the exceptions ISR address
;* - Branches to __main in the C library (which eventually
;* calls main()).
;* After Reset the CortexM0 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;* <<< Use Configuration Wizard in Context Menu >>>
;*******************************************************************************
;*
;* Redistribution and use in source and binary forms, with or without modification,
;* are permitted provided that the following conditions are met:
;* 1. Redistributions of source code must retain the above copyright notice,
;* this list of conditions and the following disclaimer.
;* 2. Redistributions in binary form must reproduce the above copyright notice,
;* this list of conditions and the following disclaimer in the documentation
;* and/or other materials provided with the distribution.
;* 3. Neither the name of STMicroelectronics nor the names of its contributors
;* may be used to endorse or promote products derived from this software
;* without specific prior written permission.
;*
;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
;
;*******************************************************************************
; Amount of memory (in bytes) allocated for Stack
; Tailor this value to your application needs
; <h> Stack Configuration
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Stack_Size EQU 0x400
AREA STACK, NOINIT, READWRITE, ALIGN=3
Stack_Mem SPACE Stack_Size
__initial_sp
; <h> Heap Configuration
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Heap_Size EQU 0x200
AREA HEAP, NOINIT, READWRITE, ALIGN=3
__heap_base
Heap_Mem SPACE Heap_Size
__heap_limit
PRESERVE8
THUMB
; Vector Table Mapped to Address 0 at Reset
AREA RESET, DATA, READONLY
EXPORT __Vectors
EXPORT __Vectors_End
EXPORT __Vectors_Size
__Vectors DCD __initial_sp ; Top of Stack
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window Watchdog
DCD PVD_VDDIO2_IRQHandler ; PVD through EXTI Line detect
DCD RTC_IRQHandler ; RTC through EXTI Line
DCD FLASH_IRQHandler ; FLASH
DCD RCC_CRS_IRQHandler ; RCC and CRS
DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
DCD TSC_IRQHandler ; TS
DCD DMA1_Ch1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler ; DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2
DCD DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler ; DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5
DCD ADC1_COMP_IRQHandler ; ADC1, COMP1 and COMP2
DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC
DCD TIM7_IRQHandler ; TIM7
DCD TIM14_IRQHandler ; TIM14
DCD TIM15_IRQHandler ; TIM15
DCD TIM16_IRQHandler ; TIM16
DCD TIM17_IRQHandler ; TIM17
DCD I2C1_IRQHandler ; I2C1
DCD I2C2_IRQHandler ; I2C2
DCD SPI1_IRQHandler ; SPI1
DCD SPI2_IRQHandler ; SPI2
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD USART3_8_IRQHandler ; USART3, USART4, USART5, USART6, USART7, USART8
DCD CEC_CAN_IRQHandler ; CEC and CAN
__Vectors_End
__Vectors_Size EQU __Vectors_End - __Vectors
AREA |.text|, CODE, READONLY
; Reset handler routine
Reset_Handler PROC
EXPORT Reset_Handler [WEAK]
IMPORT __main
IMPORT SystemInit
LDR R0, =SystemInit
BLX R0
LDR R0, =__main
BX R0
ENDP
; Dummy Exception Handlers (infinite loops which can be modified)
NMI_Handler PROC
EXPORT NMI_Handler [WEAK]
B .
ENDP
HardFault_Handler\
PROC
EXPORT HardFault_Handler [WEAK]
B .
ENDP
SVC_Handler PROC
EXPORT SVC_Handler [WEAK]
B .
ENDP
PendSV_Handler PROC
EXPORT PendSV_Handler [WEAK]
B .
ENDP
SysTick_Handler PROC
EXPORT SysTick_Handler [WEAK]
B .
ENDP
Default_Handler PROC
EXPORT WWDG_IRQHandler [WEAK]
EXPORT PVD_VDDIO2_IRQHandler [WEAK]
EXPORT RTC_IRQHandler [WEAK]
EXPORT FLASH_IRQHandler [WEAK]
EXPORT RCC_CRS_IRQHandler [WEAK]
EXPORT EXTI0_1_IRQHandler [WEAK]
EXPORT EXTI2_3_IRQHandler [WEAK]
EXPORT EXTI4_15_IRQHandler [WEAK]
EXPORT TSC_IRQHandler [WEAK]
EXPORT DMA1_Ch1_IRQHandler [WEAK]
EXPORT DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler [WEAK]
EXPORT DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler [WEAK]
EXPORT ADC1_COMP_IRQHandler [WEAK]
EXPORT TIM1_BRK_UP_TRG_COM_IRQHandler [WEAK]
EXPORT TIM1_CC_IRQHandler [WEAK]
EXPORT TIM2_IRQHandler [WEAK]
EXPORT TIM3_IRQHandler [WEAK]
EXPORT TIM6_DAC_IRQHandler [WEAK]
EXPORT TIM7_IRQHandler [WEAK]
EXPORT TIM14_IRQHandler [WEAK]
EXPORT TIM15_IRQHandler [WEAK]
EXPORT TIM16_IRQHandler [WEAK]
EXPORT TIM17_IRQHandler [WEAK]
EXPORT I2C1_IRQHandler [WEAK]
EXPORT I2C2_IRQHandler [WEAK]
EXPORT SPI1_IRQHandler [WEAK]
EXPORT SPI2_IRQHandler [WEAK]
EXPORT USART1_IRQHandler [WEAK]
EXPORT USART2_IRQHandler [WEAK]
EXPORT USART3_8_IRQHandler [WEAK]
EXPORT CEC_CAN_IRQHandler [WEAK]
WWDG_IRQHandler
PVD_VDDIO2_IRQHandler
RTC_IRQHandler
FLASH_IRQHandler
RCC_CRS_IRQHandler
EXTI0_1_IRQHandler
EXTI2_3_IRQHandler
EXTI4_15_IRQHandler
TSC_IRQHandler
DMA1_Ch1_IRQHandler
DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
ADC1_COMP_IRQHandler
TIM1_BRK_UP_TRG_COM_IRQHandler
TIM1_CC_IRQHandler
TIM2_IRQHandler
TIM3_IRQHandler
TIM6_DAC_IRQHandler
TIM7_IRQHandler
TIM14_IRQHandler
TIM15_IRQHandler
TIM16_IRQHandler
TIM17_IRQHandler
I2C1_IRQHandler
I2C2_IRQHandler
SPI1_IRQHandler
SPI2_IRQHandler
USART1_IRQHandler
USART2_IRQHandler
USART3_8_IRQHandler
CEC_CAN_IRQHandler
B .
ENDP
ALIGN
;*******************************************************************************
; User Stack and Heap initialization
;*******************************************************************************
IF :DEF:__MICROLIB
EXPORT __initial_sp
EXPORT __heap_base
EXPORT __heap_limit
ELSE
IMPORT __use_two_region_memory
EXPORT __user_initial_stackheap
__user_initial_stackheap
LDR R0, = Heap_Mem
LDR R1, =(Stack_Mem + Stack_Size)
LDR R2, = (Heap_Mem + Heap_Size)
LDR R3, = Stack_Mem
BX LR
ALIGN
ENDIF
END
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
|
aegean-odyssey/mpmd_marlin_1.1.x
| 10,745
|
STM32Cube-1.10.1/Projects/STM32F091RC-Nucleo/Examples/HAL/HAL_TimeBase_RTC_WKUP/SW4STM32/startup_stm32f091xc.s
|
/**
******************************************************************************
* @file startup_stm32f091xc.s
* @author MCD Application Team
* @brief STM32F091xC devices vector table for GCC toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M0 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
.syntax unified
.cpu cortex-m0
.fpu softvfp
.thumb
.global g_pfnVectors
.global Default_Handler
/* start address for the initialization values of the .data section.
defined in linker script */
.word _sidata
/* start address for the .data section. defined in linker script */
.word _sdata
/* end address for the .data section. defined in linker script */
.word _edata
/* start address for the .bss section. defined in linker script */
.word _sbss
/* end address for the .bss section. defined in linker script */
.word _ebss
.section .text.Reset_Handler
.weak Reset_Handler
.type Reset_Handler, %function
Reset_Handler:
ldr r0, =_estack
mov sp, r0 /* set stack pointer */
/* Copy the data segment initializers from flash to SRAM */
movs r1, #0
b LoopCopyDataInit
CopyDataInit:
ldr r3, =_sidata
ldr r3, [r3, r1]
str r3, [r0, r1]
adds r1, r1, #4
LoopCopyDataInit:
ldr r0, =_sdata
ldr r3, =_edata
adds r2, r0, r1
cmp r2, r3
bcc CopyDataInit
ldr r2, =_sbss
b LoopFillZerobss
/* Zero fill the bss segment. */
FillZerobss:
movs r3, #0
str r3, [r2]
adds r2, r2, #4
LoopFillZerobss:
ldr r3, = _ebss
cmp r2, r3
bcc FillZerobss
/* Call the clock system intitialization function.*/
bl SystemInit
/* Call static constructors */
bl __libc_init_array
/* Call the application's entry point.*/
bl main
LoopForever:
b LoopForever
.size Reset_Handler, .-Reset_Handler
/**
* @brief This is the code that gets called when the processor receives an
* unexpected interrupt. This simply enters an infinite loop, preserving
* the system state for examination by a debugger.
*
* @param None
* @retval : None
*/
.section .text.Default_Handler,"ax",%progbits
Default_Handler:
Infinite_Loop:
b Infinite_Loop
.size Default_Handler, .-Default_Handler
/******************************************************************************
*
* The minimal vector table for a Cortex M0. Note that the proper constructs
* must be placed on this to ensure that it ends up at physical address
* 0x0000.0000.
*
******************************************************************************/
.section .isr_vector,"a",%progbits
.type g_pfnVectors, %object
.size g_pfnVectors, .-g_pfnVectors
g_pfnVectors:
.word _estack
.word Reset_Handler
.word NMI_Handler
.word HardFault_Handler
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word SVC_Handler
.word 0
.word 0
.word PendSV_Handler
.word SysTick_Handler
.word WWDG_IRQHandler /* Window WatchDog */
.word PVD_VDDIO2_IRQHandler /* PVD and VDDIO2 through EXTI Line detect */
.word RTC_IRQHandler /* RTC through the EXTI line */
.word FLASH_IRQHandler /* FLASH */
.word RCC_CRS_IRQHandler /* RCC and CRS */
.word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */
.word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */
.word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */
.word TSC_IRQHandler /* TSC */
.word DMA1_Ch1_IRQHandler /* DMA1 Channel 1 */
.word DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler /* DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2 */
.word DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler /* DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5 */
.word ADC1_COMP_IRQHandler /* ADC1, COMP1 and COMP2 */
.word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */
.word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
.word TIM2_IRQHandler /* TIM2 */
.word TIM3_IRQHandler /* TIM3 */
.word TIM6_DAC_IRQHandler /* TIM6 and DAC */
.word TIM7_IRQHandler /* TIM7 */
.word TIM14_IRQHandler /* TIM14 */
.word TIM15_IRQHandler /* TIM15 */
.word TIM16_IRQHandler /* TIM16 */
.word TIM17_IRQHandler /* TIM17 */
.word I2C1_IRQHandler /* I2C1 */
.word I2C2_IRQHandler /* I2C2 */
.word SPI1_IRQHandler /* SPI1 */
.word SPI2_IRQHandler /* SPI2 */
.word USART1_IRQHandler /* USART1 */
.word USART2_IRQHandler /* USART2 */
.word USART3_8_IRQHandler /* USART3, USART4, USART5, USART6, USART7, USART8 */
.word CEC_CAN_IRQHandler /* CEC and CAN */
/*******************************************************************************
*
* Provide weak aliases for each Exception handler to the Default_Handler.
* As they are weak aliases, any function with the same name will override
* this definition.
*
*******************************************************************************/
.weak NMI_Handler
.thumb_set NMI_Handler,Default_Handler
.weak HardFault_Handler
.thumb_set HardFault_Handler,Default_Handler
.weak SVC_Handler
.thumb_set SVC_Handler,Default_Handler
.weak PendSV_Handler
.thumb_set PendSV_Handler,Default_Handler
.weak SysTick_Handler
.thumb_set SysTick_Handler,Default_Handler
.weak WWDG_IRQHandler
.thumb_set WWDG_IRQHandler,Default_Handler
.weak PVD_VDDIO2_IRQHandler
.thumb_set PVD_VDDIO2_IRQHandler,Default_Handler
.weak RTC_IRQHandler
.thumb_set RTC_IRQHandler,Default_Handler
.weak FLASH_IRQHandler
.thumb_set FLASH_IRQHandler,Default_Handler
.weak RCC_CRS_IRQHandler
.thumb_set RCC_CRS_IRQHandler,Default_Handler
.weak EXTI0_1_IRQHandler
.thumb_set EXTI0_1_IRQHandler,Default_Handler
.weak EXTI2_3_IRQHandler
.thumb_set EXTI2_3_IRQHandler,Default_Handler
.weak EXTI4_15_IRQHandler
.thumb_set EXTI4_15_IRQHandler,Default_Handler
.weak TSC_IRQHandler
.thumb_set TSC_IRQHandler,Default_Handler
.weak DMA1_Ch1_IRQHandler
.thumb_set DMA1_Ch1_IRQHandler,Default_Handler
.weak DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
.thumb_set DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler,Default_Handler
.weak DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
.thumb_set DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler,Default_Handler
.weak ADC1_COMP_IRQHandler
.thumb_set ADC1_COMP_IRQHandler,Default_Handler
.weak TIM1_BRK_UP_TRG_COM_IRQHandler
.thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
.weak TIM1_CC_IRQHandler
.thumb_set TIM1_CC_IRQHandler,Default_Handler
.weak TIM2_IRQHandler
.thumb_set TIM2_IRQHandler,Default_Handler
.weak TIM3_IRQHandler
.thumb_set TIM3_IRQHandler,Default_Handler
.weak TIM6_DAC_IRQHandler
.thumb_set TIM6_DAC_IRQHandler,Default_Handler
.weak TIM7_IRQHandler
.thumb_set TIM7_IRQHandler,Default_Handler
.weak TIM14_IRQHandler
.thumb_set TIM14_IRQHandler,Default_Handler
.weak TIM15_IRQHandler
.thumb_set TIM15_IRQHandler,Default_Handler
.weak TIM16_IRQHandler
.thumb_set TIM16_IRQHandler,Default_Handler
.weak TIM17_IRQHandler
.thumb_set TIM17_IRQHandler,Default_Handler
.weak I2C1_IRQHandler
.thumb_set I2C1_IRQHandler,Default_Handler
.weak I2C2_IRQHandler
.thumb_set I2C2_IRQHandler,Default_Handler
.weak SPI1_IRQHandler
.thumb_set SPI1_IRQHandler,Default_Handler
.weak SPI2_IRQHandler
.thumb_set SPI2_IRQHandler,Default_Handler
.weak USART1_IRQHandler
.thumb_set USART1_IRQHandler,Default_Handler
.weak USART2_IRQHandler
.thumb_set USART2_IRQHandler,Default_Handler
.weak USART3_8_IRQHandler
.thumb_set USART3_8_IRQHandler,Default_Handler
.weak CEC_CAN_IRQHandler
.thumb_set CEC_CAN_IRQHandler,Default_Handler
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
aegean-odyssey/mpmd_marlin_1.1.x
| 11,410
|
STM32Cube-1.10.1/Projects/STM32F091RC-Nucleo/Examples/HAL/HAL_TimeBase_RTC_WKUP/EWARM/startup_stm32f091xc.s
|
;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
;* File Name : startup_stm32f091xc.s
;* Author : MCD Application Team
;* Description : STM32F091xc/STM32F098xc devices vector table for EWARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == __iar_program_start,
;* - Set the vector table entries with the exceptions ISR
;* address,
;* - Branches to main in the C library (which eventually
;* calls main()).
;* After Reset the Cortex-M0 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;*******************************************************************************
;*
;* Redistribution and use in source and binary forms, with or without modification,
;* are permitted provided that the following conditions are met:
;* 1. Redistributions of source code must retain the above copyright notice,
;* this list of conditions and the following disclaimer.
;* 2. Redistributions in binary form must reproduce the above copyright notice,
;* this list of conditions and the following disclaimer in the documentation
;* and/or other materials provided with the distribution.
;* 3. Neither the name of STMicroelectronics nor the names of its contributors
;* may be used to endorse or promote products derived from this software
;* without specific prior written permission.
;*
;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
;*
;*******************************************************************************
;
;
; The modules in this file are included in the libraries, and may be replaced
; by any user-defined modules that define the PUBLIC symbol _program_start or
; a user defined start symbol.
; To override the cstartup defined in the library, simply add your modified
; version to the workbench project.
;
; The vector table is normally located at address 0.
; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
; The name "__vector_table" has special meaning for C-SPY:
; it is where the SP start value is found, and the NVIC vector
; table register (VTOR) is initialized to this address if != 0.
;
; Cortex-M version
;
MODULE ?cstartup
;; Forward declaration of sections.
SECTION CSTACK:DATA:NOROOT(3)
SECTION .intvec:CODE:NOROOT(2)
EXTERN __iar_program_start
EXTERN SystemInit
PUBLIC __vector_table
DATA
__vector_table
DCD sfe(CSTACK)
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window Watchdog
DCD PVD_VDDIO2_IRQHandler ; PVD and VDDIO2 through EXTI Line detect
DCD RTC_IRQHandler ; RTC through EXTI Line
DCD FLASH_IRQHandler ; FLASH
DCD RCC_CRS_IRQHandler ; RCC and CRS
DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
DCD TSC_IRQHandler ; TS
DCD DMA1_Ch1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler ; DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2
DCD DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler ; DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5
DCD ADC1_COMP_IRQHandler ; ADC1, COMP1 and COMP2
DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC
DCD TIM7_IRQHandler ; TIM7
DCD TIM14_IRQHandler ; TIM14
DCD TIM15_IRQHandler ; TIM15
DCD TIM16_IRQHandler ; TIM16
DCD TIM17_IRQHandler ; TIM17
DCD I2C1_IRQHandler ; I2C1
DCD I2C2_IRQHandler ; I2C2
DCD SPI1_IRQHandler ; SPI1
DCD SPI2_IRQHandler ; SPI2
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD USART3_8_IRQHandler ; USART3, USART4, USART5, USART6, USART7, USART8
DCD CEC_CAN_IRQHandler ; CEC and CAN
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Default interrupt handlers.
;;
THUMB
PUBWEAK Reset_Handler
SECTION .text:CODE:NOROOT:REORDER(2)
Reset_Handler
LDR R0, =SystemInit
BLX R0
LDR R0, =__iar_program_start
BX R0
PUBWEAK NMI_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
NMI_Handler
B NMI_Handler
PUBWEAK HardFault_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
HardFault_Handler
B HardFault_Handler
PUBWEAK SVC_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
SVC_Handler
B SVC_Handler
PUBWEAK PendSV_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
PendSV_Handler
B PendSV_Handler
PUBWEAK SysTick_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
SysTick_Handler
B SysTick_Handler
PUBWEAK WWDG_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
WWDG_IRQHandler
B WWDG_IRQHandler
PUBWEAK PVD_VDDIO2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
PVD_VDDIO2_IRQHandler
B PVD_VDDIO2_IRQHandler
PUBWEAK RTC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
RTC_IRQHandler
B RTC_IRQHandler
PUBWEAK FLASH_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
FLASH_IRQHandler
B FLASH_IRQHandler
PUBWEAK RCC_CRS_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
RCC_CRS_IRQHandler
B RCC_CRS_IRQHandler
PUBWEAK EXTI0_1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI0_1_IRQHandler
B EXTI0_1_IRQHandler
PUBWEAK EXTI2_3_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI2_3_IRQHandler
B EXTI2_3_IRQHandler
PUBWEAK EXTI4_15_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI4_15_IRQHandler
B EXTI4_15_IRQHandler
PUBWEAK TSC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TSC_IRQHandler
B TSC_IRQHandler
PUBWEAK DMA1_Ch1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Ch1_IRQHandler
B DMA1_Ch1_IRQHandler
PUBWEAK DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
B DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
PUBWEAK DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
B DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
PUBWEAK ADC1_COMP_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
ADC1_COMP_IRQHandler
B ADC1_COMP_IRQHandler
PUBWEAK TIM1_BRK_UP_TRG_COM_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM1_BRK_UP_TRG_COM_IRQHandler
B TIM1_BRK_UP_TRG_COM_IRQHandler
PUBWEAK TIM1_CC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM1_CC_IRQHandler
B TIM1_CC_IRQHandler
PUBWEAK TIM2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM2_IRQHandler
B TIM2_IRQHandler
PUBWEAK TIM3_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM3_IRQHandler
B TIM3_IRQHandler
PUBWEAK TIM6_DAC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM6_DAC_IRQHandler
B TIM6_DAC_IRQHandler
PUBWEAK TIM7_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM7_IRQHandler
B TIM7_IRQHandler
PUBWEAK TIM14_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM14_IRQHandler
B TIM14_IRQHandler
PUBWEAK TIM15_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM15_IRQHandler
B TIM15_IRQHandler
PUBWEAK TIM16_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM16_IRQHandler
B TIM16_IRQHandler
PUBWEAK TIM17_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM17_IRQHandler
B TIM17_IRQHandler
PUBWEAK I2C1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
I2C1_IRQHandler
B I2C1_IRQHandler
PUBWEAK I2C2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
I2C2_IRQHandler
B I2C2_IRQHandler
PUBWEAK SPI1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
SPI1_IRQHandler
B SPI1_IRQHandler
PUBWEAK SPI2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
SPI2_IRQHandler
B SPI2_IRQHandler
PUBWEAK USART1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
USART1_IRQHandler
B USART1_IRQHandler
PUBWEAK USART2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
USART2_IRQHandler
B USART2_IRQHandler
PUBWEAK USART3_8_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
USART3_8_IRQHandler
B USART3_8_IRQHandler
PUBWEAK CEC_CAN_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
CEC_CAN_IRQHandler
B CEC_CAN_IRQHandler
END
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
|
aegean-odyssey/mpmd_marlin_1.1.x
| 11,356
|
STM32Cube-1.10.1/Projects/STM32F091RC-Nucleo/Examples/HAL/HAL_TimeBase_TIM/MDK-ARM/startup_stm32f091xc.s
|
;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
;* File Name : startup_stm32f091xc.s
;* Author : MCD Application Team
;* Description : STM32F091xc/STM32F098xc devices vector table for MDK-ARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == Reset_Handler
;* - Set the vector table entries with the exceptions ISR address
;* - Branches to __main in the C library (which eventually
;* calls main()).
;* After Reset the CortexM0 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;* <<< Use Configuration Wizard in Context Menu >>>
;*******************************************************************************
;*
;* Redistribution and use in source and binary forms, with or without modification,
;* are permitted provided that the following conditions are met:
;* 1. Redistributions of source code must retain the above copyright notice,
;* this list of conditions and the following disclaimer.
;* 2. Redistributions in binary form must reproduce the above copyright notice,
;* this list of conditions and the following disclaimer in the documentation
;* and/or other materials provided with the distribution.
;* 3. Neither the name of STMicroelectronics nor the names of its contributors
;* may be used to endorse or promote products derived from this software
;* without specific prior written permission.
;*
;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
;
;*******************************************************************************
; Amount of memory (in bytes) allocated for Stack
; Tailor this value to your application needs
; <h> Stack Configuration
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Stack_Size EQU 0x400
AREA STACK, NOINIT, READWRITE, ALIGN=3
Stack_Mem SPACE Stack_Size
__initial_sp
; <h> Heap Configuration
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Heap_Size EQU 0x200
AREA HEAP, NOINIT, READWRITE, ALIGN=3
__heap_base
Heap_Mem SPACE Heap_Size
__heap_limit
PRESERVE8
THUMB
; Vector Table Mapped to Address 0 at Reset
AREA RESET, DATA, READONLY
EXPORT __Vectors
EXPORT __Vectors_End
EXPORT __Vectors_Size
__Vectors DCD __initial_sp ; Top of Stack
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window Watchdog
DCD PVD_VDDIO2_IRQHandler ; PVD through EXTI Line detect
DCD RTC_IRQHandler ; RTC through EXTI Line
DCD FLASH_IRQHandler ; FLASH
DCD RCC_CRS_IRQHandler ; RCC and CRS
DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
DCD TSC_IRQHandler ; TS
DCD DMA1_Ch1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler ; DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2
DCD DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler ; DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5
DCD ADC1_COMP_IRQHandler ; ADC1, COMP1 and COMP2
DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC
DCD TIM7_IRQHandler ; TIM7
DCD TIM14_IRQHandler ; TIM14
DCD TIM15_IRQHandler ; TIM15
DCD TIM16_IRQHandler ; TIM16
DCD TIM17_IRQHandler ; TIM17
DCD I2C1_IRQHandler ; I2C1
DCD I2C2_IRQHandler ; I2C2
DCD SPI1_IRQHandler ; SPI1
DCD SPI2_IRQHandler ; SPI2
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD USART3_8_IRQHandler ; USART3, USART4, USART5, USART6, USART7, USART8
DCD CEC_CAN_IRQHandler ; CEC and CAN
__Vectors_End
__Vectors_Size EQU __Vectors_End - __Vectors
AREA |.text|, CODE, READONLY
; Reset handler routine
Reset_Handler PROC
EXPORT Reset_Handler [WEAK]
IMPORT __main
IMPORT SystemInit
LDR R0, =SystemInit
BLX R0
LDR R0, =__main
BX R0
ENDP
; Dummy Exception Handlers (infinite loops which can be modified)
NMI_Handler PROC
EXPORT NMI_Handler [WEAK]
B .
ENDP
HardFault_Handler\
PROC
EXPORT HardFault_Handler [WEAK]
B .
ENDP
SVC_Handler PROC
EXPORT SVC_Handler [WEAK]
B .
ENDP
PendSV_Handler PROC
EXPORT PendSV_Handler [WEAK]
B .
ENDP
SysTick_Handler PROC
EXPORT SysTick_Handler [WEAK]
B .
ENDP
Default_Handler PROC
EXPORT WWDG_IRQHandler [WEAK]
EXPORT PVD_VDDIO2_IRQHandler [WEAK]
EXPORT RTC_IRQHandler [WEAK]
EXPORT FLASH_IRQHandler [WEAK]
EXPORT RCC_CRS_IRQHandler [WEAK]
EXPORT EXTI0_1_IRQHandler [WEAK]
EXPORT EXTI2_3_IRQHandler [WEAK]
EXPORT EXTI4_15_IRQHandler [WEAK]
EXPORT TSC_IRQHandler [WEAK]
EXPORT DMA1_Ch1_IRQHandler [WEAK]
EXPORT DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler [WEAK]
EXPORT DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler [WEAK]
EXPORT ADC1_COMP_IRQHandler [WEAK]
EXPORT TIM1_BRK_UP_TRG_COM_IRQHandler [WEAK]
EXPORT TIM1_CC_IRQHandler [WEAK]
EXPORT TIM2_IRQHandler [WEAK]
EXPORT TIM3_IRQHandler [WEAK]
EXPORT TIM6_DAC_IRQHandler [WEAK]
EXPORT TIM7_IRQHandler [WEAK]
EXPORT TIM14_IRQHandler [WEAK]
EXPORT TIM15_IRQHandler [WEAK]
EXPORT TIM16_IRQHandler [WEAK]
EXPORT TIM17_IRQHandler [WEAK]
EXPORT I2C1_IRQHandler [WEAK]
EXPORT I2C2_IRQHandler [WEAK]
EXPORT SPI1_IRQHandler [WEAK]
EXPORT SPI2_IRQHandler [WEAK]
EXPORT USART1_IRQHandler [WEAK]
EXPORT USART2_IRQHandler [WEAK]
EXPORT USART3_8_IRQHandler [WEAK]
EXPORT CEC_CAN_IRQHandler [WEAK]
WWDG_IRQHandler
PVD_VDDIO2_IRQHandler
RTC_IRQHandler
FLASH_IRQHandler
RCC_CRS_IRQHandler
EXTI0_1_IRQHandler
EXTI2_3_IRQHandler
EXTI4_15_IRQHandler
TSC_IRQHandler
DMA1_Ch1_IRQHandler
DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
ADC1_COMP_IRQHandler
TIM1_BRK_UP_TRG_COM_IRQHandler
TIM1_CC_IRQHandler
TIM2_IRQHandler
TIM3_IRQHandler
TIM6_DAC_IRQHandler
TIM7_IRQHandler
TIM14_IRQHandler
TIM15_IRQHandler
TIM16_IRQHandler
TIM17_IRQHandler
I2C1_IRQHandler
I2C2_IRQHandler
SPI1_IRQHandler
SPI2_IRQHandler
USART1_IRQHandler
USART2_IRQHandler
USART3_8_IRQHandler
CEC_CAN_IRQHandler
B .
ENDP
ALIGN
;*******************************************************************************
; User Stack and Heap initialization
;*******************************************************************************
IF :DEF:__MICROLIB
EXPORT __initial_sp
EXPORT __heap_base
EXPORT __heap_limit
ELSE
IMPORT __use_two_region_memory
EXPORT __user_initial_stackheap
__user_initial_stackheap
LDR R0, = Heap_Mem
LDR R1, =(Stack_Mem + Stack_Size)
LDR R2, = (Heap_Mem + Heap_Size)
LDR R3, = Stack_Mem
BX LR
ALIGN
ENDIF
END
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
|
aegean-odyssey/mpmd_marlin_1.1.x
| 10,745
|
STM32Cube-1.10.1/Projects/STM32F091RC-Nucleo/Examples/HAL/HAL_TimeBase_TIM/SW4STM32/startup_stm32f091xc.s
|
/**
******************************************************************************
* @file startup_stm32f091xc.s
* @author MCD Application Team
* @brief STM32F091xC devices vector table for GCC toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M0 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
.syntax unified
.cpu cortex-m0
.fpu softvfp
.thumb
.global g_pfnVectors
.global Default_Handler
/* start address for the initialization values of the .data section.
defined in linker script */
.word _sidata
/* start address for the .data section. defined in linker script */
.word _sdata
/* end address for the .data section. defined in linker script */
.word _edata
/* start address for the .bss section. defined in linker script */
.word _sbss
/* end address for the .bss section. defined in linker script */
.word _ebss
.section .text.Reset_Handler
.weak Reset_Handler
.type Reset_Handler, %function
Reset_Handler:
ldr r0, =_estack
mov sp, r0 /* set stack pointer */
/* Copy the data segment initializers from flash to SRAM */
movs r1, #0
b LoopCopyDataInit
CopyDataInit:
ldr r3, =_sidata
ldr r3, [r3, r1]
str r3, [r0, r1]
adds r1, r1, #4
LoopCopyDataInit:
ldr r0, =_sdata
ldr r3, =_edata
adds r2, r0, r1
cmp r2, r3
bcc CopyDataInit
ldr r2, =_sbss
b LoopFillZerobss
/* Zero fill the bss segment. */
FillZerobss:
movs r3, #0
str r3, [r2]
adds r2, r2, #4
LoopFillZerobss:
ldr r3, = _ebss
cmp r2, r3
bcc FillZerobss
/* Call the clock system intitialization function.*/
bl SystemInit
/* Call static constructors */
bl __libc_init_array
/* Call the application's entry point.*/
bl main
LoopForever:
b LoopForever
.size Reset_Handler, .-Reset_Handler
/**
* @brief This is the code that gets called when the processor receives an
* unexpected interrupt. This simply enters an infinite loop, preserving
* the system state for examination by a debugger.
*
* @param None
* @retval : None
*/
.section .text.Default_Handler,"ax",%progbits
Default_Handler:
Infinite_Loop:
b Infinite_Loop
.size Default_Handler, .-Default_Handler
/******************************************************************************
*
* The minimal vector table for a Cortex M0. Note that the proper constructs
* must be placed on this to ensure that it ends up at physical address
* 0x0000.0000.
*
******************************************************************************/
.section .isr_vector,"a",%progbits
.type g_pfnVectors, %object
.size g_pfnVectors, .-g_pfnVectors
g_pfnVectors:
.word _estack
.word Reset_Handler
.word NMI_Handler
.word HardFault_Handler
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word SVC_Handler
.word 0
.word 0
.word PendSV_Handler
.word SysTick_Handler
.word WWDG_IRQHandler /* Window WatchDog */
.word PVD_VDDIO2_IRQHandler /* PVD and VDDIO2 through EXTI Line detect */
.word RTC_IRQHandler /* RTC through the EXTI line */
.word FLASH_IRQHandler /* FLASH */
.word RCC_CRS_IRQHandler /* RCC and CRS */
.word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */
.word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */
.word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */
.word TSC_IRQHandler /* TSC */
.word DMA1_Ch1_IRQHandler /* DMA1 Channel 1 */
.word DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler /* DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2 */
.word DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler /* DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5 */
.word ADC1_COMP_IRQHandler /* ADC1, COMP1 and COMP2 */
.word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */
.word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
.word TIM2_IRQHandler /* TIM2 */
.word TIM3_IRQHandler /* TIM3 */
.word TIM6_DAC_IRQHandler /* TIM6 and DAC */
.word TIM7_IRQHandler /* TIM7 */
.word TIM14_IRQHandler /* TIM14 */
.word TIM15_IRQHandler /* TIM15 */
.word TIM16_IRQHandler /* TIM16 */
.word TIM17_IRQHandler /* TIM17 */
.word I2C1_IRQHandler /* I2C1 */
.word I2C2_IRQHandler /* I2C2 */
.word SPI1_IRQHandler /* SPI1 */
.word SPI2_IRQHandler /* SPI2 */
.word USART1_IRQHandler /* USART1 */
.word USART2_IRQHandler /* USART2 */
.word USART3_8_IRQHandler /* USART3, USART4, USART5, USART6, USART7, USART8 */
.word CEC_CAN_IRQHandler /* CEC and CAN */
/*******************************************************************************
*
* Provide weak aliases for each Exception handler to the Default_Handler.
* As they are weak aliases, any function with the same name will override
* this definition.
*
*******************************************************************************/
.weak NMI_Handler
.thumb_set NMI_Handler,Default_Handler
.weak HardFault_Handler
.thumb_set HardFault_Handler,Default_Handler
.weak SVC_Handler
.thumb_set SVC_Handler,Default_Handler
.weak PendSV_Handler
.thumb_set PendSV_Handler,Default_Handler
.weak SysTick_Handler
.thumb_set SysTick_Handler,Default_Handler
.weak WWDG_IRQHandler
.thumb_set WWDG_IRQHandler,Default_Handler
.weak PVD_VDDIO2_IRQHandler
.thumb_set PVD_VDDIO2_IRQHandler,Default_Handler
.weak RTC_IRQHandler
.thumb_set RTC_IRQHandler,Default_Handler
.weak FLASH_IRQHandler
.thumb_set FLASH_IRQHandler,Default_Handler
.weak RCC_CRS_IRQHandler
.thumb_set RCC_CRS_IRQHandler,Default_Handler
.weak EXTI0_1_IRQHandler
.thumb_set EXTI0_1_IRQHandler,Default_Handler
.weak EXTI2_3_IRQHandler
.thumb_set EXTI2_3_IRQHandler,Default_Handler
.weak EXTI4_15_IRQHandler
.thumb_set EXTI4_15_IRQHandler,Default_Handler
.weak TSC_IRQHandler
.thumb_set TSC_IRQHandler,Default_Handler
.weak DMA1_Ch1_IRQHandler
.thumb_set DMA1_Ch1_IRQHandler,Default_Handler
.weak DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
.thumb_set DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler,Default_Handler
.weak DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
.thumb_set DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler,Default_Handler
.weak ADC1_COMP_IRQHandler
.thumb_set ADC1_COMP_IRQHandler,Default_Handler
.weak TIM1_BRK_UP_TRG_COM_IRQHandler
.thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
.weak TIM1_CC_IRQHandler
.thumb_set TIM1_CC_IRQHandler,Default_Handler
.weak TIM2_IRQHandler
.thumb_set TIM2_IRQHandler,Default_Handler
.weak TIM3_IRQHandler
.thumb_set TIM3_IRQHandler,Default_Handler
.weak TIM6_DAC_IRQHandler
.thumb_set TIM6_DAC_IRQHandler,Default_Handler
.weak TIM7_IRQHandler
.thumb_set TIM7_IRQHandler,Default_Handler
.weak TIM14_IRQHandler
.thumb_set TIM14_IRQHandler,Default_Handler
.weak TIM15_IRQHandler
.thumb_set TIM15_IRQHandler,Default_Handler
.weak TIM16_IRQHandler
.thumb_set TIM16_IRQHandler,Default_Handler
.weak TIM17_IRQHandler
.thumb_set TIM17_IRQHandler,Default_Handler
.weak I2C1_IRQHandler
.thumb_set I2C1_IRQHandler,Default_Handler
.weak I2C2_IRQHandler
.thumb_set I2C2_IRQHandler,Default_Handler
.weak SPI1_IRQHandler
.thumb_set SPI1_IRQHandler,Default_Handler
.weak SPI2_IRQHandler
.thumb_set SPI2_IRQHandler,Default_Handler
.weak USART1_IRQHandler
.thumb_set USART1_IRQHandler,Default_Handler
.weak USART2_IRQHandler
.thumb_set USART2_IRQHandler,Default_Handler
.weak USART3_8_IRQHandler
.thumb_set USART3_8_IRQHandler,Default_Handler
.weak CEC_CAN_IRQHandler
.thumb_set CEC_CAN_IRQHandler,Default_Handler
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
aegean-odyssey/mpmd_marlin_1.1.x
| 11,410
|
STM32Cube-1.10.1/Projects/STM32F091RC-Nucleo/Examples/HAL/HAL_TimeBase_TIM/EWARM/startup_stm32f091xc.s
|
;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
;* File Name : startup_stm32f091xc.s
;* Author : MCD Application Team
;* Description : STM32F091xc/STM32F098xc devices vector table for EWARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == __iar_program_start,
;* - Set the vector table entries with the exceptions ISR
;* address,
;* - Branches to main in the C library (which eventually
;* calls main()).
;* After Reset the Cortex-M0 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;*******************************************************************************
;*
;* Redistribution and use in source and binary forms, with or without modification,
;* are permitted provided that the following conditions are met:
;* 1. Redistributions of source code must retain the above copyright notice,
;* this list of conditions and the following disclaimer.
;* 2. Redistributions in binary form must reproduce the above copyright notice,
;* this list of conditions and the following disclaimer in the documentation
;* and/or other materials provided with the distribution.
;* 3. Neither the name of STMicroelectronics nor the names of its contributors
;* may be used to endorse or promote products derived from this software
;* without specific prior written permission.
;*
;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
;*
;*******************************************************************************
;
;
; The modules in this file are included in the libraries, and may be replaced
; by any user-defined modules that define the PUBLIC symbol _program_start or
; a user defined start symbol.
; To override the cstartup defined in the library, simply add your modified
; version to the workbench project.
;
; The vector table is normally located at address 0.
; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
; The name "__vector_table" has special meaning for C-SPY:
; it is where the SP start value is found, and the NVIC vector
; table register (VTOR) is initialized to this address if != 0.
;
; Cortex-M version
;
MODULE ?cstartup
;; Forward declaration of sections.
SECTION CSTACK:DATA:NOROOT(3)
SECTION .intvec:CODE:NOROOT(2)
EXTERN __iar_program_start
EXTERN SystemInit
PUBLIC __vector_table
DATA
__vector_table
DCD sfe(CSTACK)
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window Watchdog
DCD PVD_VDDIO2_IRQHandler ; PVD and VDDIO2 through EXTI Line detect
DCD RTC_IRQHandler ; RTC through EXTI Line
DCD FLASH_IRQHandler ; FLASH
DCD RCC_CRS_IRQHandler ; RCC and CRS
DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
DCD TSC_IRQHandler ; TS
DCD DMA1_Ch1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler ; DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2
DCD DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler ; DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5
DCD ADC1_COMP_IRQHandler ; ADC1, COMP1 and COMP2
DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC
DCD TIM7_IRQHandler ; TIM7
DCD TIM14_IRQHandler ; TIM14
DCD TIM15_IRQHandler ; TIM15
DCD TIM16_IRQHandler ; TIM16
DCD TIM17_IRQHandler ; TIM17
DCD I2C1_IRQHandler ; I2C1
DCD I2C2_IRQHandler ; I2C2
DCD SPI1_IRQHandler ; SPI1
DCD SPI2_IRQHandler ; SPI2
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD USART3_8_IRQHandler ; USART3, USART4, USART5, USART6, USART7, USART8
DCD CEC_CAN_IRQHandler ; CEC and CAN
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Default interrupt handlers.
;;
THUMB
PUBWEAK Reset_Handler
SECTION .text:CODE:NOROOT:REORDER(2)
Reset_Handler
LDR R0, =SystemInit
BLX R0
LDR R0, =__iar_program_start
BX R0
PUBWEAK NMI_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
NMI_Handler
B NMI_Handler
PUBWEAK HardFault_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
HardFault_Handler
B HardFault_Handler
PUBWEAK SVC_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
SVC_Handler
B SVC_Handler
PUBWEAK PendSV_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
PendSV_Handler
B PendSV_Handler
PUBWEAK SysTick_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
SysTick_Handler
B SysTick_Handler
PUBWEAK WWDG_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
WWDG_IRQHandler
B WWDG_IRQHandler
PUBWEAK PVD_VDDIO2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
PVD_VDDIO2_IRQHandler
B PVD_VDDIO2_IRQHandler
PUBWEAK RTC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
RTC_IRQHandler
B RTC_IRQHandler
PUBWEAK FLASH_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
FLASH_IRQHandler
B FLASH_IRQHandler
PUBWEAK RCC_CRS_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
RCC_CRS_IRQHandler
B RCC_CRS_IRQHandler
PUBWEAK EXTI0_1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI0_1_IRQHandler
B EXTI0_1_IRQHandler
PUBWEAK EXTI2_3_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI2_3_IRQHandler
B EXTI2_3_IRQHandler
PUBWEAK EXTI4_15_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI4_15_IRQHandler
B EXTI4_15_IRQHandler
PUBWEAK TSC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TSC_IRQHandler
B TSC_IRQHandler
PUBWEAK DMA1_Ch1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Ch1_IRQHandler
B DMA1_Ch1_IRQHandler
PUBWEAK DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
B DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
PUBWEAK DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
B DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
PUBWEAK ADC1_COMP_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
ADC1_COMP_IRQHandler
B ADC1_COMP_IRQHandler
PUBWEAK TIM1_BRK_UP_TRG_COM_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM1_BRK_UP_TRG_COM_IRQHandler
B TIM1_BRK_UP_TRG_COM_IRQHandler
PUBWEAK TIM1_CC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM1_CC_IRQHandler
B TIM1_CC_IRQHandler
PUBWEAK TIM2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM2_IRQHandler
B TIM2_IRQHandler
PUBWEAK TIM3_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM3_IRQHandler
B TIM3_IRQHandler
PUBWEAK TIM6_DAC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM6_DAC_IRQHandler
B TIM6_DAC_IRQHandler
PUBWEAK TIM7_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM7_IRQHandler
B TIM7_IRQHandler
PUBWEAK TIM14_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM14_IRQHandler
B TIM14_IRQHandler
PUBWEAK TIM15_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM15_IRQHandler
B TIM15_IRQHandler
PUBWEAK TIM16_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM16_IRQHandler
B TIM16_IRQHandler
PUBWEAK TIM17_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM17_IRQHandler
B TIM17_IRQHandler
PUBWEAK I2C1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
I2C1_IRQHandler
B I2C1_IRQHandler
PUBWEAK I2C2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
I2C2_IRQHandler
B I2C2_IRQHandler
PUBWEAK SPI1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
SPI1_IRQHandler
B SPI1_IRQHandler
PUBWEAK SPI2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
SPI2_IRQHandler
B SPI2_IRQHandler
PUBWEAK USART1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
USART1_IRQHandler
B USART1_IRQHandler
PUBWEAK USART2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
USART2_IRQHandler
B USART2_IRQHandler
PUBWEAK USART3_8_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
USART3_8_IRQHandler
B USART3_8_IRQHandler
PUBWEAK CEC_CAN_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
CEC_CAN_IRQHandler
B CEC_CAN_IRQHandler
END
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
|
aenu1/aps3e
| 2,965
|
app/src/main/cpp/rpcs3/3rdparty/7zip/7zip/Asm/arm64/7zAsm.S
|
// 7zAsm.S -- ASM macros for arm64
// 2021-04-25 : Igor Pavlov : Public domain
#define r0 x0
#define r1 x1
#define r2 x2
#define r3 x3
#define r4 x4
#define r5 x5
#define r6 x6
#define r7 x7
#define r8 x8
#define r9 x9
#define r10 x10
#define r11 x11
#define r12 x12
#define r13 x13
#define r14 x14
#define r15 x15
#define r16 x16
#define r17 x17
#define r18 x18
#define r19 x19
#define r20 x20
#define r21 x21
#define r22 x22
#define r23 x23
#define r24 x24
#define r25 x25
#define r26 x26
#define r27 x27
#define r28 x28
#define r29 x29
#define r30 x30
#define REG_ABI_PARAM_0 r0
#define REG_ABI_PARAM_1 r1
#define REG_ABI_PARAM_2 r2
.macro p2_add reg:req, param:req
add \reg, \reg, \param
.endm
.macro p2_sub reg:req, param:req
sub \reg, \reg, \param
.endm
.macro p2_sub_s reg:req, param:req
subs \reg, \reg, \param
.endm
.macro p2_and reg:req, param:req
and \reg, \reg, \param
.endm
.macro xor reg:req, param:req
eor \reg, \reg, \param
.endm
.macro or reg:req, param:req
orr \reg, \reg, \param
.endm
.macro shl reg:req, param:req
lsl \reg, \reg, \param
.endm
.macro shr reg:req, param:req
lsr \reg, \reg, \param
.endm
.macro sar reg:req, param:req
asr \reg, \reg, \param
.endm
.macro p1_neg reg:req
neg \reg, \reg
.endm
.macro dec reg:req
sub \reg, \reg, 1
.endm
.macro dec_s reg:req
subs \reg, \reg, 1
.endm
.macro inc reg:req
add \reg, \reg, 1
.endm
.macro inc_s reg:req
adds \reg, \reg, 1
.endm
.macro imul reg:req, param:req
mul \reg, \reg, \param
.endm
/*
arm64 and arm use reverted c flag after subs/cmp instructions:
arm64-arm : x86
b.lo / b.cc : jb / jc
b.hs / b.cs : jae / jnc
*/
.macro jmp lab:req
b \lab
.endm
.macro je lab:req
b.eq \lab
.endm
.macro jz lab:req
b.eq \lab
.endm
.macro jnz lab:req
b.ne \lab
.endm
.macro jne lab:req
b.ne \lab
.endm
.macro jb lab:req
b.lo \lab
.endm
.macro jbe lab:req
b.ls \lab
.endm
.macro ja lab:req
b.hi \lab
.endm
.macro jae lab:req
b.hs \lab
.endm
.macro cmove dest:req, srcTrue:req
csel \dest, \srcTrue, \dest, eq
.endm
.macro cmovne dest:req, srcTrue:req
csel \dest, \srcTrue, \dest, ne
.endm
.macro cmovs dest:req, srcTrue:req
csel \dest, \srcTrue, \dest, mi
.endm
.macro cmovns dest:req, srcTrue:req
csel \dest, \srcTrue, \dest, pl
.endm
.macro cmovb dest:req, srcTrue:req
csel \dest, \srcTrue, \dest, lo
.endm
.macro cmovae dest:req, srcTrue:req
csel \dest, \srcTrue, \dest, hs
.endm
.macro MY_ALIGN_16 macro
.p2align 4,, (1 << 4) - 1
.endm
.macro MY_ALIGN_32 macro
.p2align 5,, (1 << 5) - 1
.endm
.macro MY_ALIGN_64 macro
.p2align 6,, (1 << 6) - 1
.endm
|
aenu1/aps3e
| 37,757
|
app/src/main/cpp/rpcs3/3rdparty/7zip/7zip/Asm/arm64/LzmaDecOpt.S
|
// LzmaDecOpt.S -- ARM64-ASM version of LzmaDec_DecodeReal_3() function
// 2021-04-25 : Igor Pavlov : Public domain
/*
; 3 - is the code compatibility version of LzmaDec_DecodeReal_*()
; function for check at link time.
; That code is tightly coupled with LzmaDec_TryDummy()
; and with another functions in LzmaDec.c file.
; CLzmaDec structure, (probs) array layout, input and output of
; LzmaDec_DecodeReal_*() must be equal in both versions (C / ASM).
*/
#include "7zAsm.S"
// .arch armv8-a
// .file "LzmaDecOpt.c"
.text
.align 2
.p2align 4,,15
#ifdef __APPLE__
.globl _LzmaDec_DecodeReal_3
#else
.global LzmaDec_DecodeReal_3
#endif
// .type LzmaDec_DecodeReal_3, %function
// #define _LZMA_SIZE_OPT 1
#define LZMA_USE_4BYTES_FILL 1
// #define LZMA_USE_2BYTES_COPY 1
// #define LZMA_USE_CMOV_LZ_WRAP 1
// #define _LZMA_PROB32 1
#define MY_ALIGN_FOR_ENTRY MY_ALIGN_32
#define MY_ALIGN_FOR_LOOP MY_ALIGN_32
#define MY_ALIGN_FOR_LOOP_16 MY_ALIGN_16
#ifdef _LZMA_PROB32
.equ PSHIFT , 2
.macro PLOAD dest:req, mem:req
ldr \dest, [\mem]
.endm
.macro PLOAD_PREINDEXED dest:req, mem:req, offset:req
ldr \dest, [\mem, \offset]!
.endm
.macro PLOAD_2 dest:req, mem1:req, mem2:req
ldr \dest, [\mem1, \mem2]
.endm
.macro PLOAD_LSL dest:req, mem1:req, mem2:req
ldr \dest, [\mem1, \mem2, lsl #PSHIFT]
.endm
.macro PSTORE src:req, mem:req
str \src, [\mem]
.endm
.macro PSTORE_2 src:req, mem1:req, mem2:req
str \src, [\mem1, \mem2]
.endm
.macro PSTORE_LSL src:req, mem1:req, mem2:req
str \src, [\mem1, \mem2, lsl #PSHIFT]
.endm
.macro PSTORE_LSL_M1 src:req, mem1:req, mem2:req, temp_reg:req
// you must check that temp_reg is free register when macro is used
add \temp_reg, \mem1, \mem2
str \src, [\temp_reg, \mem2]
.endm
#else
// .equ PSHIFT , 1
#define PSHIFT 1
.macro PLOAD dest:req, mem:req
ldrh \dest, [\mem]
.endm
.macro PLOAD_PREINDEXED dest:req, mem:req, offset:req
ldrh \dest, [\mem, \offset]!
.endm
.macro PLOAD_2 dest:req, mem1:req, mem2:req
ldrh \dest, [\mem1, \mem2]
.endm
.macro PLOAD_LSL dest:req, mem1:req, mem2:req
ldrh \dest, [\mem1, \mem2, lsl #PSHIFT]
.endm
.macro PSTORE src:req, mem:req
strh \src, [\mem]
.endm
.macro PSTORE_2 src:req, mem1:req, mem2:req
strh \src, [\mem1, \mem2]
.endm
.macro PSTORE_LSL src:req, mem1:req, mem2:req
strh \src, [\mem1, \mem2, lsl #PSHIFT]
.endm
.macro PSTORE_LSL_M1 src:req, mem1:req, mem2:req, temp_reg:req
strh \src, [\mem1, \mem2]
.endm
#endif
.equ PMULT , (1 << PSHIFT)
.equ PMULT_2 , (2 << PSHIFT)
.equ kMatchSpecLen_Error_Data , (1 << 9)
# x7 t0 : NORM_CALC : prob2 (IF_BIT_1)
# x6 t1 : NORM_CALC : probs_state
# x8 t2 : (LITM) temp : (TREE) temp
# x4 t3 : (LITM) bit : (TREE) temp : UPDATE_0/UPDATE_0 temp
# x10 t4 : (LITM) offs : (TREE) probs_PMULT : numBits
# x9 t5 : (LITM) match : sym2 (ShortDist)
# x1 t6 : (LITM) litm_prob : (TREE) prob_reg : pbPos
# x2 t7 : (LITM) prm : probBranch : cnt
# x3 sym : dist
# x12 len
# x0 range
# x5 cod
#define range w0
// t6
#define pbPos w1
#define pbPos_R r1
#define prob_reg w1
#define litm_prob prob_reg
// t7
#define probBranch w2
#define cnt w2
#define cnt_R r2
#define prm r2
#define sym w3
#define sym_R r3
#define dist sym
#define t3 w4
#define bit w4
#define bit_R r4
#define update_temp_reg r4
#define cod w5
#define t1 w6
#define t1_R r6
#define probs_state t1_R
#define t0 w7
#define t0_R r7
#define prob2 t0
#define t2 w8
#define t2_R r8
// t5
#define match w9
#define sym2 w9
#define sym2_R r9
#define t4 w10
#define t4_R r10
#define offs w10
#define offs_R r10
#define probs r11
#define len w12
#define len_R x12
#define state w13
#define state_R r13
#define dicPos r14
#define buf r15
#define bufLimit r16
#define dicBufSize r17
#define limit r19
#define rep0 w20
#define rep0_R r20
#define rep1 w21
#define rep2 w22
#define rep3 w23
#define dic r24
#define probs_IsMatch r25
#define probs_Spec r26
#define checkDicSize w27
#define processedPos w28
#define pbMask w29
#define lc2_lpMask w30
.equ kNumBitModelTotalBits , 11
.equ kBitModelTotal , (1 << kNumBitModelTotalBits)
.equ kNumMoveBits , 5
.equ kBitModelOffset , (kBitModelTotal - (1 << kNumMoveBits) + 1)
.macro NORM_2 macro
ldrb t0, [buf], 1
shl range, 8
orr cod, t0, cod, lsl 8
/*
mov t0, cod
ldrb cod, [buf], 1
shl range, 8
bfi cod, t0, #8, #24
*/
.endm
.macro TEST_HIGH_BYTE_range macro
tst range, 0xFF000000
.endm
.macro NORM macro
TEST_HIGH_BYTE_range
jnz 1f
NORM_2
1:
.endm
# ---------- Branch MACROS ----------
.macro UPDATE_0__0
sub prob2, probBranch, kBitModelOffset
.endm
.macro UPDATE_0__1
sub probBranch, probBranch, prob2, asr #(kNumMoveBits)
.endm
.macro UPDATE_0__2 probsArray:req, probOffset:req, probDisp:req
.if \probDisp == 0
PSTORE_2 probBranch, \probsArray, \probOffset
.elseif \probOffset == 0
PSTORE_2 probBranch, \probsArray, \probDisp * PMULT
.else
.error "unsupported"
// add update_temp_reg, \probsArray, \probOffset
PSTORE_2 probBranch, update_temp_reg, \probDisp * PMULT
.endif
.endm
.macro UPDATE_0 probsArray:req, probOffset:req, probDisp:req
UPDATE_0__0
UPDATE_0__1
UPDATE_0__2 \probsArray, \probOffset, \probDisp
.endm
.macro UPDATE_1 probsArray:req, probOffset:req, probDisp:req
// sub cod, cod, prob2
// sub range, range, prob2
p2_sub cod, range
sub range, prob2, range
sub prob2, probBranch, probBranch, lsr #(kNumMoveBits)
.if \probDisp == 0
PSTORE_2 prob2, \probsArray, \probOffset
.elseif \probOffset == 0
PSTORE_2 prob2, \probsArray, \probDisp * PMULT
.else
.error "unsupported"
// add update_temp_reg, \probsArray, \probOffset
PSTORE_2 prob2, update_temp_reg, \probDisp * PMULT
.endif
.endm
.macro CMP_COD_BASE
NORM
// lsr prob2, range, kNumBitModelTotalBits
// imul prob2, probBranch
// cmp cod, prob2
mov prob2, range
shr range, kNumBitModelTotalBits
imul range, probBranch
cmp cod, range
.endm
.macro CMP_COD_1 probsArray:req
PLOAD probBranch, \probsArray
CMP_COD_BASE
.endm
.macro CMP_COD_3 probsArray:req, probOffset:req, probDisp:req
.if \probDisp == 0
PLOAD_2 probBranch, \probsArray, \probOffset
.elseif \probOffset == 0
PLOAD_2 probBranch, \probsArray, \probDisp * PMULT
.else
.error "unsupported"
add update_temp_reg, \probsArray, \probOffset
PLOAD_2 probBranch, update_temp_reg, \probDisp * PMULT
.endif
CMP_COD_BASE
.endm
.macro IF_BIT_1_NOUP probsArray:req, probOffset:req, probDisp:req, toLabel:req
CMP_COD_3 \probsArray, \probOffset, \probDisp
jae \toLabel
.endm
.macro IF_BIT_1 probsArray:req, probOffset:req, probDisp:req, toLabel:req
IF_BIT_1_NOUP \probsArray, \probOffset, \probDisp, \toLabel
UPDATE_0 \probsArray, \probOffset, \probDisp
.endm
.macro IF_BIT_0_NOUP probsArray:req, probOffset:req, probDisp:req, toLabel:req
CMP_COD_3 \probsArray, \probOffset, \probDisp
jb \toLabel
.endm
.macro IF_BIT_0_NOUP_1 probsArray:req, toLabel:req
CMP_COD_1 \probsArray
jb \toLabel
.endm
# ---------- CMOV MACROS ----------
.macro NORM_LSR
NORM
lsr t0, range, #kNumBitModelTotalBits
.endm
.macro COD_RANGE_SUB
subs t1, cod, t0
p2_sub range, t0
.endm
.macro RANGE_IMUL prob:req
imul t0, \prob
.endm
.macro NORM_CALC prob:req
NORM_LSR
RANGE_IMUL \prob
COD_RANGE_SUB
.endm
.macro CMOV_range
cmovb range, t0
.endm
.macro CMOV_code
cmovae cod, t1
.endm
.macro CMOV_code_Model_Pre prob:req
sub t0, \prob, kBitModelOffset
CMOV_code
cmovae t0, \prob
.endm
.macro PUP_BASE_2 prob:req, dest_reg:req
# only sar works for both 16/32 bit prob modes
sub \dest_reg, \prob, \dest_reg, asr #(kNumMoveBits)
.endm
.macro PUP prob:req, probPtr:req, mem2:req
PUP_BASE_2 \prob, t0
PSTORE_2 t0, \probPtr, \mem2
.endm
#define probs_PMULT t4_R
.macro BIT_01
add probs_PMULT, probs, PMULT
.endm
.macro BIT_0_R prob:req
PLOAD_2 \prob, probs, 1 * PMULT
NORM_LSR
sub t3, \prob, kBitModelOffset
RANGE_IMUL \prob
PLOAD_2 t2, probs, 1 * PMULT_2
COD_RANGE_SUB
CMOV_range
cmovae t3, \prob
PLOAD_2 t0, probs, 1 * PMULT_2 + PMULT
PUP_BASE_2 \prob, t3
csel \prob, t2, t0, lo
CMOV_code
mov sym, 2
PSTORE_2 t3, probs, 1 * PMULT
adc sym, sym, wzr
BIT_01
.endm
.macro BIT_1_R prob:req
NORM_LSR
p2_add sym, sym
sub t3, \prob, kBitModelOffset
RANGE_IMUL \prob
PLOAD_LSL t2, probs, sym_R
COD_RANGE_SUB
CMOV_range
cmovae t3, \prob
PLOAD_LSL t0, probs_PMULT, sym_R
PUP_BASE_2 \prob, t3
csel \prob, t2, t0, lo
CMOV_code
PSTORE_LSL_M1 t3, probs, sym_R, t2_R
adc sym, sym, wzr
.endm
.macro BIT_2_R prob:req
NORM_LSR
p2_add sym, sym
sub t3, \prob, kBitModelOffset
RANGE_IMUL \prob
COD_RANGE_SUB
CMOV_range
cmovae t3, \prob
CMOV_code
PUP_BASE_2 \prob, t3
PSTORE_LSL_M1 t3, probs, sym_R, t2_R
adc sym, sym, wzr
.endm
# ---------- MATCHED LITERAL ----------
.macro LITM_0 macro
shl match, (PSHIFT + 1)
and bit, match, 256 * PMULT
add prm, probs, 256 * PMULT + 1 * PMULT
p2_add match, match
p2_add prm, bit_R
eor offs, bit, 256 * PMULT
PLOAD litm_prob, prm
NORM_LSR
sub t2, litm_prob, kBitModelOffset
RANGE_IMUL litm_prob
COD_RANGE_SUB
cmovae offs, bit
CMOV_range
and bit, match, offs
cmovae t2, litm_prob
CMOV_code
mov sym, 2
PUP_BASE_2 litm_prob, t2
PSTORE t2, prm
add prm, probs, offs_R
adc sym, sym, wzr
.endm
.macro LITM macro
p2_add prm, bit_R
xor offs, bit
PLOAD_LSL litm_prob, prm, sym_R
NORM_LSR
p2_add match, match
sub t2, litm_prob, kBitModelOffset
RANGE_IMUL litm_prob
COD_RANGE_SUB
cmovae offs, bit
CMOV_range
and bit, match, offs
cmovae t2, litm_prob
CMOV_code
PUP_BASE_2 litm_prob, t2
PSTORE_LSL t2, prm, sym_R
add prm, probs, offs_R
adc sym, sym, sym
.endm
.macro LITM_2 macro
p2_add prm, bit_R
PLOAD_LSL litm_prob, prm, sym_R
NORM_LSR
sub t2, litm_prob, kBitModelOffset
RANGE_IMUL litm_prob
COD_RANGE_SUB
CMOV_range
cmovae t2, litm_prob
CMOV_code
PUP_BASE_2 litm_prob, t2
PSTORE_LSL t2, prm, sym_R
adc sym, sym, sym
.endm
# ---------- REVERSE BITS ----------
.macro REV_0 prob:req
NORM_CALC \prob
CMOV_range
PLOAD t2, sym2_R
PLOAD_2 t3, probs, 3 * PMULT
CMOV_code_Model_Pre \prob
add t1_R, probs, 3 * PMULT
cmovae sym2_R, t1_R
PUP \prob, probs, 1 * PMULT
csel \prob, t2, t3, lo
.endm
.macro REV_1 prob:req, step:req
NORM_LSR
PLOAD_PREINDEXED t2, sym2_R, (\step * PMULT)
RANGE_IMUL \prob
COD_RANGE_SUB
CMOV_range
PLOAD_2 t3, sym2_R, (\step * PMULT)
sub t0, \prob, kBitModelOffset
CMOV_code
add t1_R, sym2_R, \step * PMULT
cmovae t0, \prob
cmovae sym2_R, t1_R
PUP_BASE_2 \prob, t0
csel \prob, t2, t3, lo
PSTORE_2 t0, t1_R, 0 - \step * PMULT_2
.endm
.macro REV_2 prob:req, step:req
sub t1_R, sym2_R, probs
NORM_LSR
orr sym, sym, t1, lsr #PSHIFT
RANGE_IMUL \prob
COD_RANGE_SUB
sub t2, sym, \step
CMOV_range
cmovb sym, t2
CMOV_code_Model_Pre \prob
PUP \prob, sym2_R, 0
.endm
.macro REV_1_VAR prob:req
PLOAD \prob, sym_R
mov probs, sym_R
p2_add sym_R, sym2_R
NORM_LSR
add t2_R, sym_R, sym2_R
RANGE_IMUL \prob
COD_RANGE_SUB
cmovae sym_R, t2_R
CMOV_range
CMOV_code_Model_Pre \prob
p2_add sym2, sym2
PUP \prob, probs, 0
.endm
.macro add_big dest:req, src:req, param:req
.if (\param) < (1 << 12)
add \dest, \src, \param
.else
#ifndef _LZMA_PROB32
.error "unexpcted add_big expansion"
#endif
add \dest, \src, (\param) / 2
add \dest, \dest, (\param) - (\param) / 2
.endif
.endm
.macro sub_big dest:req, src:req, param:req
.if (\param) < (1 << 12)
sub \dest, \src, \param
.else
#ifndef _LZMA_PROB32
.error "unexpcted sub_big expansion"
#endif
sub \dest, \src, (\param) / 2
sub \dest, \dest, (\param) - (\param) / 2
.endif
.endm
.macro SET_probs offset:req
// add_big probs, probs_Spec, (\offset) * PMULT
add probs, probs_IsMatch, ((\offset) - IsMatch) * PMULT
.endm
.macro LIT_PROBS
add sym, sym, processedPos, lsl 8
inc processedPos
UPDATE_0__0
shl sym, lc2_lpMask
SET_probs Literal
p2_and sym, lc2_lpMask
// p2_add probs_state, pbPos_R
p2_add probs, sym_R
UPDATE_0__1
add probs, probs, sym_R, lsl 1
UPDATE_0__2 probs_state, pbPos_R, 0
.endm
.equ kNumPosBitsMax , 4
.equ kNumPosStatesMax , (1 << kNumPosBitsMax)
.equ kLenNumLowBits , 3
.equ kLenNumLowSymbols , (1 << kLenNumLowBits)
.equ kLenNumHighBits , 8
.equ kLenNumHighSymbols , (1 << kLenNumHighBits)
.equ kNumLenProbs , (2 * kLenNumLowSymbols * kNumPosStatesMax + kLenNumHighSymbols)
.equ LenLow , 0
.equ LenChoice , LenLow
.equ LenChoice2 , (LenLow + kLenNumLowSymbols)
.equ LenHigh , (LenLow + 2 * kLenNumLowSymbols * kNumPosStatesMax)
.equ kNumStates , 12
.equ kNumStates2 , 16
.equ kNumLitStates , 7
.equ kStartPosModelIndex , 4
.equ kEndPosModelIndex , 14
.equ kNumFullDistances , (1 << (kEndPosModelIndex >> 1))
.equ kNumPosSlotBits , 6
.equ kNumLenToPosStates , 4
.equ kNumAlignBits , 4
.equ kAlignTableSize , (1 << kNumAlignBits)
.equ kMatchMinLen , 2
.equ kMatchSpecLenStart , (kMatchMinLen + kLenNumLowSymbols * 2 + kLenNumHighSymbols)
// .equ kStartOffset , 1408
.equ kStartOffset , 0
.equ SpecPos , (-kStartOffset)
.equ IsRep0Long , (SpecPos + kNumFullDistances)
.equ RepLenCoder , (IsRep0Long + (kNumStates2 << kNumPosBitsMax))
.equ LenCoder , (RepLenCoder + kNumLenProbs)
.equ IsMatch , (LenCoder + kNumLenProbs)
.equ kAlign , (IsMatch + (kNumStates2 << kNumPosBitsMax))
.equ IsRep , (kAlign + kAlignTableSize)
.equ IsRepG0 , (IsRep + kNumStates)
.equ IsRepG1 , (IsRepG0 + kNumStates)
.equ IsRepG2 , (IsRepG1 + kNumStates)
.equ PosSlot , (IsRepG2 + kNumStates)
.equ Literal , (PosSlot + (kNumLenToPosStates << kNumPosSlotBits))
.equ NUM_BASE_PROBS , (Literal + kStartOffset)
.if kStartOffset != 0 // && IsMatch != 0
.error "Stop_Compiling_Bad_StartOffset"
.endif
.if NUM_BASE_PROBS != 1984
.error "Stop_Compiling_Bad_LZMA_PROBS"
.endif
.equ offset_lc , 0
.equ offset_lp , 1
.equ offset_pb , 2
.equ offset_dicSize , 4
.equ offset_probs , 4 + offset_dicSize
.equ offset_probs_1664 , 8 + offset_probs
.equ offset_dic , 8 + offset_probs_1664
.equ offset_dicBufSize , 8 + offset_dic
.equ offset_dicPos , 8 + offset_dicBufSize
.equ offset_buf , 8 + offset_dicPos
.equ offset_range , 8 + offset_buf
.equ offset_code , 4 + offset_range
.equ offset_processedPos , 4 + offset_code
.equ offset_checkDicSize , 4 + offset_processedPos
.equ offset_rep0 , 4 + offset_checkDicSize
.equ offset_rep1 , 4 + offset_rep0
.equ offset_rep2 , 4 + offset_rep1
.equ offset_rep3 , 4 + offset_rep2
.equ offset_state , 4 + offset_rep3
.equ offset_remainLen , 4 + offset_state
.equ offset_TOTAL_SIZE , 4 + offset_remainLen
.if offset_TOTAL_SIZE != 96
.error "Incorrect offset_TOTAL_SIZE"
.endif
.macro IsMatchBranch_Pre
# prob = probs + IsMatch + (state << kNumPosBitsMax) + posState;
and pbPos, pbMask, processedPos, lsl #(kLenNumLowBits + 1 + PSHIFT)
add probs_state, probs_IsMatch, state_R
.endm
/*
.macro IsMatchBranch
IsMatchBranch_Pre
IF_BIT_1 probs_state, pbPos_R, (IsMatch - IsMatch), IsMatch_label
.endm
*/
.macro CheckLimits
cmp buf, bufLimit
jae fin_OK
cmp dicPos, limit
jae fin_OK
.endm
#define CheckLimits_lit CheckLimits
/*
.macro CheckLimits_lit
cmp buf, bufLimit
jae fin_OK_lit
cmp dicPos, limit
jae fin_OK_lit
.endm
*/
#define PARAM_lzma REG_ABI_PARAM_0
#define PARAM_limit REG_ABI_PARAM_1
#define PARAM_bufLimit REG_ABI_PARAM_2
.macro LOAD_LZMA_VAR reg:req, struct_offs:req
ldr \reg, [PARAM_lzma, \struct_offs]
.endm
.macro LOAD_LZMA_BYTE reg:req, struct_offs:req
ldrb \reg, [PARAM_lzma, \struct_offs]
.endm
.macro LOAD_LZMA_PAIR reg0:req, reg1:req, struct_offs:req
ldp \reg0, \reg1, [PARAM_lzma, \struct_offs]
.endm
LzmaDec_DecodeReal_3:
_LzmaDec_DecodeReal_3:
/*
.LFB0:
.cfi_startproc
*/
stp x19, x20, [sp, -128]!
stp x21, x22, [sp, 16]
stp x23, x24, [sp, 32]
stp x25, x26, [sp, 48]
stp x27, x28, [sp, 64]
stp x29, x30, [sp, 80]
str PARAM_lzma, [sp, 120]
mov bufLimit, PARAM_bufLimit
mov limit, PARAM_limit
LOAD_LZMA_PAIR dic, dicBufSize, offset_dic
LOAD_LZMA_PAIR dicPos, buf, offset_dicPos
LOAD_LZMA_PAIR rep0, rep1, offset_rep0
LOAD_LZMA_PAIR rep2, rep3, offset_rep2
mov t0, 1 << (kLenNumLowBits + 1 + PSHIFT)
LOAD_LZMA_BYTE pbMask, offset_pb
p2_add limit, dic
mov len, wzr // we can set it in all requiread branches instead
lsl pbMask, t0, pbMask
p2_add dicPos, dic
p2_sub pbMask, t0
LOAD_LZMA_BYTE lc2_lpMask, offset_lc
mov t0, 256 << PSHIFT
LOAD_LZMA_BYTE t1, offset_lp
p2_add t1, lc2_lpMask
p2_sub lc2_lpMask, (256 << PSHIFT) - PSHIFT
shl t0, t1
p2_add lc2_lpMask, t0
LOAD_LZMA_VAR probs_Spec, offset_probs
LOAD_LZMA_VAR checkDicSize, offset_checkDicSize
LOAD_LZMA_VAR processedPos, offset_processedPos
LOAD_LZMA_VAR state, offset_state
// range is r0 : this load must be last don't move
LOAD_LZMA_PAIR range, cod, offset_range
mov sym, wzr
shl state, PSHIFT
add_big probs_IsMatch, probs_Spec, ((IsMatch - SpecPos) << PSHIFT)
// if (processedPos != 0 || checkDicSize != 0)
orr t0, checkDicSize, processedPos
cbz t0, 1f
add t0_R, dicBufSize, dic
cmp dicPos, dic
cmovne t0_R, dicPos
ldrb sym, [t0_R, -1]
1:
IsMatchBranch_Pre
cmp state, 4 * PMULT
jb lit_end
cmp state, kNumLitStates * PMULT
jb lit_matched_end
jmp lz_end
#define BIT_0 BIT_0_R prob_reg
#define BIT_1 BIT_1_R prob_reg
#define BIT_2 BIT_2_R prob_reg
# ---------- LITERAL ----------
MY_ALIGN_64
lit_start:
mov state, wzr
lit_start_2:
LIT_PROBS
#ifdef _LZMA_SIZE_OPT
PLOAD_2 prob_reg, probs, 1 * PMULT
mov sym, 1
BIT_01
MY_ALIGN_FOR_LOOP
lit_loop:
BIT_1
tbz sym, 7, lit_loop
#else
BIT_0
BIT_1
BIT_1
BIT_1
BIT_1
BIT_1
BIT_1
#endif
BIT_2
IsMatchBranch_Pre
strb sym, [dicPos], 1
p2_and sym, 255
CheckLimits_lit
lit_end:
IF_BIT_0_NOUP probs_state, pbPos_R, (IsMatch - IsMatch), lit_start
# jmp IsMatch_label
#define FLAG_STATE_BITS (4 + PSHIFT)
# ---------- MATCHES ----------
# MY_ALIGN_FOR_ENTRY
IsMatch_label:
UPDATE_1 probs_state, pbPos_R, (IsMatch - IsMatch)
IF_BIT_1 probs_state, 0, (IsRep - IsMatch), IsRep_label
SET_probs LenCoder
or state, (1 << FLAG_STATE_BITS)
# ---------- LEN DECODE ----------
len_decode:
mov len, 8 - kMatchMinLen
IF_BIT_0_NOUP_1 probs, len_mid_0
UPDATE_1 probs, 0, 0
p2_add probs, (1 << (kLenNumLowBits + PSHIFT))
mov len, 0 - kMatchMinLen
IF_BIT_0_NOUP_1 probs, len_mid_0
UPDATE_1 probs, 0, 0
p2_add probs, LenHigh * PMULT - (1 << (kLenNumLowBits + PSHIFT))
#if 0 == 1
BIT_0
BIT_1
BIT_1
BIT_1
BIT_1
BIT_1
#else
PLOAD_2 prob_reg, probs, 1 * PMULT
mov sym, 1
BIT_01
MY_ALIGN_FOR_LOOP
len8_loop:
BIT_1
tbz sym, 6, len8_loop
#endif
mov len, (kLenNumHighSymbols - kLenNumLowSymbols * 2) - kMatchMinLen
jmp len_mid_2
MY_ALIGN_FOR_ENTRY
len_mid_0:
UPDATE_0 probs, 0, 0
p2_add probs, pbPos_R
BIT_0
len_mid_2:
BIT_1
BIT_2
sub len, sym, len
tbz state, FLAG_STATE_BITS, copy_match
# ---------- DECODE DISTANCE ----------
// probs + PosSlot + ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) << kNumPosSlotBits);
mov t0, 3 + kMatchMinLen
cmp len, 3 + kMatchMinLen
cmovb t0, len
SET_probs PosSlot - (kMatchMinLen << (kNumPosSlotBits))
add probs, probs, t0_R, lsl #(kNumPosSlotBits + PSHIFT)
#ifdef _LZMA_SIZE_OPT
PLOAD_2 prob_reg, probs, 1 * PMULT
mov sym, 1
BIT_01
MY_ALIGN_FOR_LOOP
slot_loop:
BIT_1
tbz sym, 5, slot_loop
#else
BIT_0
BIT_1
BIT_1
BIT_1
BIT_1
#endif
#define numBits t4
mov numBits, sym
BIT_2
// we need only low bits
p2_and sym, 3
cmp numBits, 32 + kEndPosModelIndex / 2
jb short_dist
SET_probs kAlign
# unsigned numDirectBits = (unsigned)(((distance >> 1) - 1));
p2_sub numBits, (32 + 1 + kNumAlignBits)
# distance = (2 | (distance & 1));
or sym, 2
PLOAD_2 prob_reg, probs, 1 * PMULT
add sym2_R, probs, 2 * PMULT
# ---------- DIRECT DISTANCE ----------
.macro DIRECT_1
shr range, 1
subs t0, cod, range
p2_add sym, sym
// add t1, sym, 1
csel cod, cod, t0, mi
csinc sym, sym, sym, mi
// csel sym, t1, sym, pl
// adc sym, sym, sym // not 100% compatible for "corruptued-allowed" LZMA streams
dec_s numBits
je direct_end
.endm
#ifdef _LZMA_SIZE_OPT
jmp direct_norm
MY_ALIGN_FOR_ENTRY
direct_loop:
DIRECT_1
direct_norm:
TEST_HIGH_BYTE_range
jnz direct_loop
NORM_2
jmp direct_loop
#else
.macro DIRECT_2
TEST_HIGH_BYTE_range
jz direct_unroll
DIRECT_1
.endm
DIRECT_2
DIRECT_2
DIRECT_2
DIRECT_2
DIRECT_2
DIRECT_2
DIRECT_2
DIRECT_2
direct_unroll:
NORM_2
DIRECT_1
DIRECT_1
DIRECT_1
DIRECT_1
DIRECT_1
DIRECT_1
DIRECT_1
DIRECT_1
jmp direct_unroll
#endif
MY_ALIGN_FOR_ENTRY
direct_end:
shl sym, kNumAlignBits
REV_0 prob_reg
REV_1 prob_reg, 2
REV_1 prob_reg, 4
REV_2 prob_reg, 8
decode_dist_end:
// if (distance >= (checkDicSize == 0 ? processedPos: checkDicSize))
tst checkDicSize, checkDicSize
csel t0, processedPos, checkDicSize, eq
cmp sym, t0
jae end_of_payload
// jmp end_of_payload # for debug
mov rep3, rep2
mov rep2, rep1
mov rep1, rep0
add rep0, sym, 1
.macro STATE_UPDATE_FOR_MATCH
// state = (state < kNumStates + kNumLitStates) ? kNumLitStates : kNumLitStates + 3;
// cmp state, (kNumStates + kNumLitStates) * PMULT
cmp state, kNumLitStates * PMULT + (1 << FLAG_STATE_BITS)
mov state, kNumLitStates * PMULT
mov t0, (kNumLitStates + 3) * PMULT
cmovae state, t0
.endm
STATE_UPDATE_FOR_MATCH
# ---------- COPY MATCH ----------
copy_match:
// if ((rem = limit - dicPos) == 0) break // return SZ_ERROR_DATA;
subs cnt_R, limit, dicPos
// jz fin_dicPos_LIMIT
jz fin_OK
// curLen = ((rem < len) ? (unsigned)rem : len);
cmp cnt_R, len_R
cmovae cnt, len
sub t0_R, dicPos, dic
p2_add dicPos, cnt_R
p2_add processedPos, cnt
p2_sub len, cnt
// pos = dicPos - rep0 + (dicPos < rep0 ? dicBufSize : 0);
p2_sub_s t0_R, rep0_R
jae 1f
cmn t0_R, cnt_R
p2_add t0_R, dicBufSize
ja copy_match_cross
1:
# ---------- COPY MATCH FAST ----------
# t0_R : src_pos
p2_add t0_R, dic
ldrb sym, [t0_R]
p2_add t0_R, cnt_R
p1_neg cnt_R
copy_common:
dec dicPos
# dicPos : (ptr_to_last_dest_BYTE)
# t0_R : (src_lim)
# cnt_R : (-curLen)
IsMatchBranch_Pre
inc_s cnt_R
jz copy_end
cmp rep0, 1
je copy_match_0
#ifdef LZMA_USE_2BYTES_COPY
strb sym, [dicPos, cnt_R]
dec dicPos
# dicPos : (ptr_to_last_dest_16bitWORD)
p2_and cnt_R, -2
ldrh sym, [t0_R, cnt_R]
adds cnt_R, cnt_R, 2
jz 2f
MY_ALIGN_FOR_LOOP
1:
/*
strh sym, [dicPos, cnt_R]
ldrh sym, [t0_R, cnt_R]
adds cnt_R, cnt_R, 2
jz 2f
*/
strh sym, [dicPos, cnt_R]
ldrh sym, [t0_R, cnt_R]
adds cnt_R, cnt_R, 2
jnz 1b
2:
/*
// for universal little/big endian code, but slow
strh sym, [dicPos]
inc dicPos
ldrb sym, [t0_R, -1]
*/
#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
// we must improve big-endian detection for another compilers
// for big-endian we need to revert bytes
rev16 sym, sym
#endif
// (sym) must represent as little-endian here:
strb sym, [dicPos], 1
shr sym, 8
#else
MY_ALIGN_FOR_LOOP
1:
strb sym, [dicPos, cnt_R]
ldrb sym, [t0_R, cnt_R]
inc_s cnt_R
jz copy_end
strb sym, [dicPos, cnt_R]
ldrb sym, [t0_R, cnt_R]
inc_s cnt_R
jnz 1b
#endif
copy_end:
lz_end_match:
strb sym, [dicPos], 1
# IsMatchBranch_Pre
CheckLimits
lz_end:
IF_BIT_1_NOUP probs_state, pbPos_R, (IsMatch - IsMatch), IsMatch_label
# ---------- LITERAL MATCHED ----------
LIT_PROBS
// matchByte = dic[dicPos - rep0 + (dicPos < rep0 ? dicBufSize : 0)];
sub t0_R, dicPos, dic
p2_sub_s t0_R, rep0_R
#ifdef LZMA_USE_CMOV_LZ_WRAP
add t1_R, t0_R, dicBufSize
cmovb t0_R, t1_R
#else
jae 1f
p2_add t0_R, dicBufSize
1:
#endif
ldrb match, [dic, t0_R]
// state -= (state < 10) ? 3 : 6;
sub sym, state, 6 * PMULT
cmp state, 10 * PMULT
p2_sub state, 3 * PMULT
cmovae state, sym
#ifdef _LZMA_SIZE_OPT
mov offs, 256 * PMULT
shl match, (PSHIFT + 1)
mov sym, 1
and bit, match, offs
add prm, probs, offs_R
MY_ALIGN_FOR_LOOP
litm_loop:
LITM
tbz sym, 8, litm_loop
#else
LITM_0
LITM
LITM
LITM
LITM
LITM
LITM
LITM_2
#endif
IsMatchBranch_Pre
strb sym, [dicPos], 1
p2_and sym, 255
// mov len, wzr // LITM uses same regisetr (len / offs). So we clear it
CheckLimits_lit
lit_matched_end:
IF_BIT_1_NOUP probs_state, pbPos_R, (IsMatch - IsMatch), IsMatch_label
# IsMatchBranch
p2_sub state, 3 * PMULT
jmp lit_start_2
# ---------- REP 0 LITERAL ----------
MY_ALIGN_FOR_ENTRY
IsRep0Short_label:
UPDATE_0 probs_state, pbPos_R, 0
// dic[dicPos] = dic[dicPos - rep0 + (dicPos < rep0 ? dicBufSize : 0)];
sub t0_R, dicPos, dic
// state = state < kNumLitStates ? 9 : 11;
or state, 1 * PMULT
# the caller doesn't allow (dicPos >= limit) case for REP_SHORT
# so we don't need the following (dicPos == limit) check here:
# cmp dicPos, limit
# jae fin_dicPos_LIMIT_REP_SHORT
# // jmp fin_dicPos_LIMIT_REP_SHORT // for testing/debug puposes
inc processedPos
IsMatchBranch_Pre
p2_sub_s t0_R, rep0_R
#ifdef LZMA_USE_CMOV_LZ_WRAP
add sym_R, t0_R, dicBufSize
cmovb t0_R, sym_R
#else
jae 1f
p2_add t0_R, dicBufSize
1:
#endif
ldrb sym, [dic, t0_R]
// mov len, wzr
jmp lz_end_match
MY_ALIGN_FOR_ENTRY
IsRep_label:
UPDATE_1 probs_state, 0, (IsRep - IsMatch)
# The (checkDicSize == 0 && processedPos == 0) case was checked before in LzmaDec.c with kBadRepCode.
# So we don't check it here.
# mov t0, processedPos
# or t0, checkDicSize
# jz fin_ERROR_2
// state = state < kNumLitStates ? 8 : 11;
cmp state, kNumLitStates * PMULT
mov state, 8 * PMULT
mov probBranch, 11 * PMULT
cmovae state, probBranch
SET_probs RepLenCoder
IF_BIT_1 probs_state, 0, (IsRepG0 - IsMatch), IsRepG0_label
sub_big probs_state, probs_state, (IsMatch - IsRep0Long) << PSHIFT
IF_BIT_0_NOUP probs_state, pbPos_R, 0, IsRep0Short_label
UPDATE_1 probs_state, pbPos_R, 0
jmp len_decode
MY_ALIGN_FOR_ENTRY
IsRepG0_label:
UPDATE_1 probs_state, 0, (IsRepG0 - IsMatch)
IF_BIT_1 probs_state, 0, (IsRepG1 - IsMatch), IsRepG1_label
mov dist, rep1
mov rep1, rep0
mov rep0, dist
jmp len_decode
# MY_ALIGN_FOR_ENTRY
IsRepG1_label:
UPDATE_1 probs_state, 0, (IsRepG1 - IsMatch)
IF_BIT_1 probs_state, 0, (IsRepG2 - IsMatch), IsRepG2_label
mov dist, rep2
mov rep2, rep1
mov rep1, rep0
mov rep0, dist
jmp len_decode
# MY_ALIGN_FOR_ENTRY
IsRepG2_label:
UPDATE_1 probs_state, 0, (IsRepG2 - IsMatch)
mov dist, rep3
mov rep3, rep2
mov rep2, rep1
mov rep1, rep0
mov rep0, dist
jmp len_decode
# ---------- SPEC SHORT DISTANCE ----------
MY_ALIGN_FOR_ENTRY
short_dist:
p2_sub_s numBits, 32 + 1
jbe decode_dist_end
or sym, 2
shl sym, numBits
add sym_R, probs_Spec, sym_R, lsl #PSHIFT
p2_add sym_R, SpecPos * PMULT + 1 * PMULT
mov sym2, PMULT // # step
MY_ALIGN_FOR_LOOP
spec_loop:
REV_1_VAR prob_reg
dec_s numBits
jnz spec_loop
p2_add sym2_R, probs_Spec
.if SpecPos != 0
p2_add sym2_R, SpecPos * PMULT
.endif
p2_sub sym_R, sym2_R
shr sym, PSHIFT
jmp decode_dist_end
# ---------- COPY MATCH 0 ----------
MY_ALIGN_FOR_ENTRY
copy_match_0:
#ifdef LZMA_USE_4BYTES_FILL
strb sym, [dicPos, cnt_R]
inc_s cnt_R
jz copy_end
strb sym, [dicPos, cnt_R]
inc_s cnt_R
jz copy_end
strb sym, [dicPos, cnt_R]
inc_s cnt_R
jz copy_end
orr t3, sym, sym, lsl 8
p2_and cnt_R, -4
orr t3, t3, t3, lsl 16
MY_ALIGN_FOR_LOOP_16
1:
/*
str t3, [dicPos, cnt_R]
adds cnt_R, cnt_R, 4
jz 2f
*/
str t3, [dicPos, cnt_R]
adds cnt_R, cnt_R, 4
jnz 1b
2:
// p2_and sym, 255
#else
MY_ALIGN_FOR_LOOP
1:
strb sym, [dicPos, cnt_R]
inc_s cnt_R
jz copy_end
strb sym, [dicPos, cnt_R]
inc_s cnt_R
jnz 1b
#endif
jmp copy_end
# ---------- COPY MATCH CROSS ----------
copy_match_cross:
# t0_R - src pos
# cnt_R - total copy len
p1_neg cnt_R
1:
ldrb sym, [dic, t0_R]
inc t0_R
strb sym, [dicPos, cnt_R]
inc cnt_R
cmp t0_R, dicBufSize
jne 1b
ldrb sym, [dic]
sub t0_R, dic, cnt_R
jmp copy_common
/*
fin_dicPos_LIMIT_REP_SHORT:
mov len, 1
jmp fin_OK
*/
/*
fin_dicPos_LIMIT:
jmp fin_OK
# For more strict mode we can stop decoding with error
# mov sym, 1
# jmp fin
*/
fin_ERROR_MATCH_DIST:
# rep0 = distance + 1;
p2_add len, kMatchSpecLen_Error_Data
mov rep3, rep2
mov rep2, rep1
mov rep1, rep0
mov rep0, sym
STATE_UPDATE_FOR_MATCH
# jmp fin_OK
mov sym, 1
jmp fin
end_of_payload:
inc_s sym
jnz fin_ERROR_MATCH_DIST
mov len, kMatchSpecLenStart
xor state, (1 << FLAG_STATE_BITS)
jmp fin_OK
/*
fin_OK_lit:
mov len, wzr
*/
fin_OK:
mov sym, wzr
fin:
NORM
#define fin_lzma_reg t0_R
.macro STORE_LZMA_VAR reg:req, struct_offs:req
str \reg, [fin_lzma_reg, \struct_offs]
.endm
.macro STORE_LZMA_PAIR reg0:req, reg1:req, struct_offs:req
stp \reg0, \reg1, [fin_lzma_reg, \struct_offs]
.endm
ldr fin_lzma_reg, [sp, 120]
p2_sub dicPos, dic
shr state, PSHIFT
STORE_LZMA_PAIR dicPos, buf, offset_dicPos
STORE_LZMA_PAIR range, cod, offset_range
STORE_LZMA_VAR processedPos, offset_processedPos
STORE_LZMA_PAIR rep0, rep1, offset_rep0
STORE_LZMA_PAIR rep2, rep3, offset_rep2
STORE_LZMA_PAIR state, len, offset_state
mov w0, sym
ldp x29, x30, [sp, 80]
ldp x27, x28, [sp, 64]
ldp x25, x26, [sp, 48]
ldp x23, x24, [sp, 32]
ldp x21, x22, [sp, 16]
ldp x19, x20, [sp], 128
ret
/*
.cfi_endproc
.LFE0:
.size LzmaDec_DecodeReal_3, .-LzmaDec_DecodeReal_3
.ident "TAG_LZMA"
.section .note.GNU-stack,"",@progbits
*/
|
aegean-odyssey/mpmd_marlin_1.1.x
| 11,355
|
STM32Cube-1.10.1/Projects/STM32F091RC-Nucleo/Examples/CRC/CRC_Data_Reversing_16bit_CRC/MDK-ARM/startup_stm32f091xc.s
|
;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
;* File Name : startup_stm32f091xc.s
;* Author : MCD Application Team
;* Description : STM32F091xc/STM32F098xc devices vector table for MDK-ARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == Reset_Handler
;* - Set the vector table entries with the exceptions ISR address
;* - Branches to __main in the C library (which eventually
;* calls main()).
;* After Reset the CortexM0 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;* <<< Use Configuration Wizard in Context Menu >>>
;*******************************************************************************
;
;* Redistribution and use in source and binary forms, with or without modification,
;* are permitted provided that the following conditions are met:
;* 1. Redistributions of source code must retain the above copyright notice,
;* this list of conditions and the following disclaimer.
;* 2. Redistributions in binary form must reproduce the above copyright notice,
;* this list of conditions and the following disclaimer in the documentation
;* and/or other materials provided with the distribution.
;* 3. Neither the name of STMicroelectronics nor the names of its contributors
;* may be used to endorse or promote products derived from this software
;* without specific prior written permission.
;*
;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
;
;*******************************************************************************
; Amount of memory (in bytes) allocated for Stack
; Tailor this value to your application needs
; <h> Stack Configuration
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Stack_Size EQU 0x400
AREA STACK, NOINIT, READWRITE, ALIGN=3
Stack_Mem SPACE Stack_Size
__initial_sp
; <h> Heap Configuration
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Heap_Size EQU 0x200
AREA HEAP, NOINIT, READWRITE, ALIGN=3
__heap_base
Heap_Mem SPACE Heap_Size
__heap_limit
PRESERVE8
THUMB
; Vector Table Mapped to Address 0 at Reset
AREA RESET, DATA, READONLY
EXPORT __Vectors
EXPORT __Vectors_End
EXPORT __Vectors_Size
__Vectors DCD __initial_sp ; Top of Stack
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window Watchdog
DCD PVD_VDDIO2_IRQHandler ; PVD through EXTI Line detect
DCD RTC_IRQHandler ; RTC through EXTI Line
DCD FLASH_IRQHandler ; FLASH
DCD RCC_CRS_IRQHandler ; RCC and CRS
DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
DCD TSC_IRQHandler ; TS
DCD DMA1_Ch1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler ; DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2
DCD DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler ; DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5
DCD ADC1_COMP_IRQHandler ; ADC1, COMP1 and COMP2
DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC
DCD TIM7_IRQHandler ; TIM7
DCD TIM14_IRQHandler ; TIM14
DCD TIM15_IRQHandler ; TIM15
DCD TIM16_IRQHandler ; TIM16
DCD TIM17_IRQHandler ; TIM17
DCD I2C1_IRQHandler ; I2C1
DCD I2C2_IRQHandler ; I2C2
DCD SPI1_IRQHandler ; SPI1
DCD SPI2_IRQHandler ; SPI2
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD USART3_8_IRQHandler ; USART3, USART4, USART5, USART6, USART7, USART8
DCD CEC_CAN_IRQHandler ; CEC and CAN
__Vectors_End
__Vectors_Size EQU __Vectors_End - __Vectors
AREA |.text|, CODE, READONLY
; Reset handler routine
Reset_Handler PROC
EXPORT Reset_Handler [WEAK]
IMPORT __main
IMPORT SystemInit
LDR R0, =SystemInit
BLX R0
LDR R0, =__main
BX R0
ENDP
; Dummy Exception Handlers (infinite loops which can be modified)
NMI_Handler PROC
EXPORT NMI_Handler [WEAK]
B .
ENDP
HardFault_Handler\
PROC
EXPORT HardFault_Handler [WEAK]
B .
ENDP
SVC_Handler PROC
EXPORT SVC_Handler [WEAK]
B .
ENDP
PendSV_Handler PROC
EXPORT PendSV_Handler [WEAK]
B .
ENDP
SysTick_Handler PROC
EXPORT SysTick_Handler [WEAK]
B .
ENDP
Default_Handler PROC
EXPORT WWDG_IRQHandler [WEAK]
EXPORT PVD_VDDIO2_IRQHandler [WEAK]
EXPORT RTC_IRQHandler [WEAK]
EXPORT FLASH_IRQHandler [WEAK]
EXPORT RCC_CRS_IRQHandler [WEAK]
EXPORT EXTI0_1_IRQHandler [WEAK]
EXPORT EXTI2_3_IRQHandler [WEAK]
EXPORT EXTI4_15_IRQHandler [WEAK]
EXPORT TSC_IRQHandler [WEAK]
EXPORT DMA1_Ch1_IRQHandler [WEAK]
EXPORT DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler [WEAK]
EXPORT DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler [WEAK]
EXPORT ADC1_COMP_IRQHandler [WEAK]
EXPORT TIM1_BRK_UP_TRG_COM_IRQHandler [WEAK]
EXPORT TIM1_CC_IRQHandler [WEAK]
EXPORT TIM2_IRQHandler [WEAK]
EXPORT TIM3_IRQHandler [WEAK]
EXPORT TIM6_DAC_IRQHandler [WEAK]
EXPORT TIM7_IRQHandler [WEAK]
EXPORT TIM14_IRQHandler [WEAK]
EXPORT TIM15_IRQHandler [WEAK]
EXPORT TIM16_IRQHandler [WEAK]
EXPORT TIM17_IRQHandler [WEAK]
EXPORT I2C1_IRQHandler [WEAK]
EXPORT I2C2_IRQHandler [WEAK]
EXPORT SPI1_IRQHandler [WEAK]
EXPORT SPI2_IRQHandler [WEAK]
EXPORT USART1_IRQHandler [WEAK]
EXPORT USART2_IRQHandler [WEAK]
EXPORT USART3_8_IRQHandler [WEAK]
EXPORT CEC_CAN_IRQHandler [WEAK]
WWDG_IRQHandler
PVD_VDDIO2_IRQHandler
RTC_IRQHandler
FLASH_IRQHandler
RCC_CRS_IRQHandler
EXTI0_1_IRQHandler
EXTI2_3_IRQHandler
EXTI4_15_IRQHandler
TSC_IRQHandler
DMA1_Ch1_IRQHandler
DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
ADC1_COMP_IRQHandler
TIM1_BRK_UP_TRG_COM_IRQHandler
TIM1_CC_IRQHandler
TIM2_IRQHandler
TIM3_IRQHandler
TIM6_DAC_IRQHandler
TIM7_IRQHandler
TIM14_IRQHandler
TIM15_IRQHandler
TIM16_IRQHandler
TIM17_IRQHandler
I2C1_IRQHandler
I2C2_IRQHandler
SPI1_IRQHandler
SPI2_IRQHandler
USART1_IRQHandler
USART2_IRQHandler
USART3_8_IRQHandler
CEC_CAN_IRQHandler
B .
ENDP
ALIGN
;*******************************************************************************
; User Stack and Heap initialization
;*******************************************************************************
IF :DEF:__MICROLIB
EXPORT __initial_sp
EXPORT __heap_base
EXPORT __heap_limit
ELSE
IMPORT __use_two_region_memory
EXPORT __user_initial_stackheap
__user_initial_stackheap
LDR R0, = Heap_Mem
LDR R1, =(Stack_Mem + Stack_Size)
LDR R2, = (Heap_Mem + Heap_Size)
LDR R3, = Stack_Mem
BX LR
ALIGN
ENDIF
END
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
|
aegean-odyssey/mpmd_marlin_1.1.x
| 10,745
|
STM32Cube-1.10.1/Projects/STM32F091RC-Nucleo/Examples/CRC/CRC_Data_Reversing_16bit_CRC/SW4STM32/startup_stm32f091xc.s
|
/**
******************************************************************************
* @file startup_stm32f091xc.s
* @author MCD Application Team
* @brief STM32F091xC devices vector table for GCC toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M0 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
.syntax unified
.cpu cortex-m0
.fpu softvfp
.thumb
.global g_pfnVectors
.global Default_Handler
/* start address for the initialization values of the .data section.
defined in linker script */
.word _sidata
/* start address for the .data section. defined in linker script */
.word _sdata
/* end address for the .data section. defined in linker script */
.word _edata
/* start address for the .bss section. defined in linker script */
.word _sbss
/* end address for the .bss section. defined in linker script */
.word _ebss
.section .text.Reset_Handler
.weak Reset_Handler
.type Reset_Handler, %function
Reset_Handler:
ldr r0, =_estack
mov sp, r0 /* set stack pointer */
/* Copy the data segment initializers from flash to SRAM */
movs r1, #0
b LoopCopyDataInit
CopyDataInit:
ldr r3, =_sidata
ldr r3, [r3, r1]
str r3, [r0, r1]
adds r1, r1, #4
LoopCopyDataInit:
ldr r0, =_sdata
ldr r3, =_edata
adds r2, r0, r1
cmp r2, r3
bcc CopyDataInit
ldr r2, =_sbss
b LoopFillZerobss
/* Zero fill the bss segment. */
FillZerobss:
movs r3, #0
str r3, [r2]
adds r2, r2, #4
LoopFillZerobss:
ldr r3, = _ebss
cmp r2, r3
bcc FillZerobss
/* Call the clock system intitialization function.*/
bl SystemInit
/* Call static constructors */
bl __libc_init_array
/* Call the application's entry point.*/
bl main
LoopForever:
b LoopForever
.size Reset_Handler, .-Reset_Handler
/**
* @brief This is the code that gets called when the processor receives an
* unexpected interrupt. This simply enters an infinite loop, preserving
* the system state for examination by a debugger.
*
* @param None
* @retval : None
*/
.section .text.Default_Handler,"ax",%progbits
Default_Handler:
Infinite_Loop:
b Infinite_Loop
.size Default_Handler, .-Default_Handler
/******************************************************************************
*
* The minimal vector table for a Cortex M0. Note that the proper constructs
* must be placed on this to ensure that it ends up at physical address
* 0x0000.0000.
*
******************************************************************************/
.section .isr_vector,"a",%progbits
.type g_pfnVectors, %object
.size g_pfnVectors, .-g_pfnVectors
g_pfnVectors:
.word _estack
.word Reset_Handler
.word NMI_Handler
.word HardFault_Handler
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word SVC_Handler
.word 0
.word 0
.word PendSV_Handler
.word SysTick_Handler
.word WWDG_IRQHandler /* Window WatchDog */
.word PVD_VDDIO2_IRQHandler /* PVD and VDDIO2 through EXTI Line detect */
.word RTC_IRQHandler /* RTC through the EXTI line */
.word FLASH_IRQHandler /* FLASH */
.word RCC_CRS_IRQHandler /* RCC and CRS */
.word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */
.word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */
.word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */
.word TSC_IRQHandler /* TSC */
.word DMA1_Ch1_IRQHandler /* DMA1 Channel 1 */
.word DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler /* DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2 */
.word DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler /* DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5 */
.word ADC1_COMP_IRQHandler /* ADC1, COMP1 and COMP2 */
.word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */
.word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
.word TIM2_IRQHandler /* TIM2 */
.word TIM3_IRQHandler /* TIM3 */
.word TIM6_DAC_IRQHandler /* TIM6 and DAC */
.word TIM7_IRQHandler /* TIM7 */
.word TIM14_IRQHandler /* TIM14 */
.word TIM15_IRQHandler /* TIM15 */
.word TIM16_IRQHandler /* TIM16 */
.word TIM17_IRQHandler /* TIM17 */
.word I2C1_IRQHandler /* I2C1 */
.word I2C2_IRQHandler /* I2C2 */
.word SPI1_IRQHandler /* SPI1 */
.word SPI2_IRQHandler /* SPI2 */
.word USART1_IRQHandler /* USART1 */
.word USART2_IRQHandler /* USART2 */
.word USART3_8_IRQHandler /* USART3, USART4, USART5, USART6, USART7, USART8 */
.word CEC_CAN_IRQHandler /* CEC and CAN */
/*******************************************************************************
*
* Provide weak aliases for each Exception handler to the Default_Handler.
* As they are weak aliases, any function with the same name will override
* this definition.
*
*******************************************************************************/
.weak NMI_Handler
.thumb_set NMI_Handler,Default_Handler
.weak HardFault_Handler
.thumb_set HardFault_Handler,Default_Handler
.weak SVC_Handler
.thumb_set SVC_Handler,Default_Handler
.weak PendSV_Handler
.thumb_set PendSV_Handler,Default_Handler
.weak SysTick_Handler
.thumb_set SysTick_Handler,Default_Handler
.weak WWDG_IRQHandler
.thumb_set WWDG_IRQHandler,Default_Handler
.weak PVD_VDDIO2_IRQHandler
.thumb_set PVD_VDDIO2_IRQHandler,Default_Handler
.weak RTC_IRQHandler
.thumb_set RTC_IRQHandler,Default_Handler
.weak FLASH_IRQHandler
.thumb_set FLASH_IRQHandler,Default_Handler
.weak RCC_CRS_IRQHandler
.thumb_set RCC_CRS_IRQHandler,Default_Handler
.weak EXTI0_1_IRQHandler
.thumb_set EXTI0_1_IRQHandler,Default_Handler
.weak EXTI2_3_IRQHandler
.thumb_set EXTI2_3_IRQHandler,Default_Handler
.weak EXTI4_15_IRQHandler
.thumb_set EXTI4_15_IRQHandler,Default_Handler
.weak TSC_IRQHandler
.thumb_set TSC_IRQHandler,Default_Handler
.weak DMA1_Ch1_IRQHandler
.thumb_set DMA1_Ch1_IRQHandler,Default_Handler
.weak DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
.thumb_set DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler,Default_Handler
.weak DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
.thumb_set DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler,Default_Handler
.weak ADC1_COMP_IRQHandler
.thumb_set ADC1_COMP_IRQHandler,Default_Handler
.weak TIM1_BRK_UP_TRG_COM_IRQHandler
.thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
.weak TIM1_CC_IRQHandler
.thumb_set TIM1_CC_IRQHandler,Default_Handler
.weak TIM2_IRQHandler
.thumb_set TIM2_IRQHandler,Default_Handler
.weak TIM3_IRQHandler
.thumb_set TIM3_IRQHandler,Default_Handler
.weak TIM6_DAC_IRQHandler
.thumb_set TIM6_DAC_IRQHandler,Default_Handler
.weak TIM7_IRQHandler
.thumb_set TIM7_IRQHandler,Default_Handler
.weak TIM14_IRQHandler
.thumb_set TIM14_IRQHandler,Default_Handler
.weak TIM15_IRQHandler
.thumb_set TIM15_IRQHandler,Default_Handler
.weak TIM16_IRQHandler
.thumb_set TIM16_IRQHandler,Default_Handler
.weak TIM17_IRQHandler
.thumb_set TIM17_IRQHandler,Default_Handler
.weak I2C1_IRQHandler
.thumb_set I2C1_IRQHandler,Default_Handler
.weak I2C2_IRQHandler
.thumb_set I2C2_IRQHandler,Default_Handler
.weak SPI1_IRQHandler
.thumb_set SPI1_IRQHandler,Default_Handler
.weak SPI2_IRQHandler
.thumb_set SPI2_IRQHandler,Default_Handler
.weak USART1_IRQHandler
.thumb_set USART1_IRQHandler,Default_Handler
.weak USART2_IRQHandler
.thumb_set USART2_IRQHandler,Default_Handler
.weak USART3_8_IRQHandler
.thumb_set USART3_8_IRQHandler,Default_Handler
.weak CEC_CAN_IRQHandler
.thumb_set CEC_CAN_IRQHandler,Default_Handler
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
aegean-odyssey/mpmd_marlin_1.1.x
| 11,410
|
STM32Cube-1.10.1/Projects/STM32F091RC-Nucleo/Examples/CRC/CRC_Data_Reversing_16bit_CRC/EWARM/startup_stm32f091xc.s
|
;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
;* File Name : startup_stm32f091xc.s
;* Author : MCD Application Team
;* Description : STM32F091xc/STM32F098xc devices vector table for EWARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == __iar_program_start,
;* - Set the vector table entries with the exceptions ISR
;* address,
;* - Branches to main in the C library (which eventually
;* calls main()).
;* After Reset the Cortex-M0 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;*******************************************************************************
;*
;* Redistribution and use in source and binary forms, with or without modification,
;* are permitted provided that the following conditions are met:
;* 1. Redistributions of source code must retain the above copyright notice,
;* this list of conditions and the following disclaimer.
;* 2. Redistributions in binary form must reproduce the above copyright notice,
;* this list of conditions and the following disclaimer in the documentation
;* and/or other materials provided with the distribution.
;* 3. Neither the name of STMicroelectronics nor the names of its contributors
;* may be used to endorse or promote products derived from this software
;* without specific prior written permission.
;*
;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
;*
;*******************************************************************************
;
;
; The modules in this file are included in the libraries, and may be replaced
; by any user-defined modules that define the PUBLIC symbol _program_start or
; a user defined start symbol.
; To override the cstartup defined in the library, simply add your modified
; version to the workbench project.
;
; The vector table is normally located at address 0.
; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
; The name "__vector_table" has special meaning for C-SPY:
; it is where the SP start value is found, and the NVIC vector
; table register (VTOR) is initialized to this address if != 0.
;
; Cortex-M version
;
MODULE ?cstartup
;; Forward declaration of sections.
SECTION CSTACK:DATA:NOROOT(3)
SECTION .intvec:CODE:NOROOT(2)
EXTERN __iar_program_start
EXTERN SystemInit
PUBLIC __vector_table
DATA
__vector_table
DCD sfe(CSTACK)
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window Watchdog
DCD PVD_VDDIO2_IRQHandler ; PVD and VDDIO2 through EXTI Line detect
DCD RTC_IRQHandler ; RTC through EXTI Line
DCD FLASH_IRQHandler ; FLASH
DCD RCC_CRS_IRQHandler ; RCC and CRS
DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
DCD TSC_IRQHandler ; TS
DCD DMA1_Ch1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler ; DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2
DCD DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler ; DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5
DCD ADC1_COMP_IRQHandler ; ADC1, COMP1 and COMP2
DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC
DCD TIM7_IRQHandler ; TIM7
DCD TIM14_IRQHandler ; TIM14
DCD TIM15_IRQHandler ; TIM15
DCD TIM16_IRQHandler ; TIM16
DCD TIM17_IRQHandler ; TIM17
DCD I2C1_IRQHandler ; I2C1
DCD I2C2_IRQHandler ; I2C2
DCD SPI1_IRQHandler ; SPI1
DCD SPI2_IRQHandler ; SPI2
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD USART3_8_IRQHandler ; USART3, USART4, USART5, USART6, USART7, USART8
DCD CEC_CAN_IRQHandler ; CEC and CAN
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Default interrupt handlers.
;;
THUMB
PUBWEAK Reset_Handler
SECTION .text:CODE:NOROOT:REORDER(2)
Reset_Handler
LDR R0, =SystemInit
BLX R0
LDR R0, =__iar_program_start
BX R0
PUBWEAK NMI_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
NMI_Handler
B NMI_Handler
PUBWEAK HardFault_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
HardFault_Handler
B HardFault_Handler
PUBWEAK SVC_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
SVC_Handler
B SVC_Handler
PUBWEAK PendSV_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
PendSV_Handler
B PendSV_Handler
PUBWEAK SysTick_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
SysTick_Handler
B SysTick_Handler
PUBWEAK WWDG_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
WWDG_IRQHandler
B WWDG_IRQHandler
PUBWEAK PVD_VDDIO2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
PVD_VDDIO2_IRQHandler
B PVD_VDDIO2_IRQHandler
PUBWEAK RTC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
RTC_IRQHandler
B RTC_IRQHandler
PUBWEAK FLASH_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
FLASH_IRQHandler
B FLASH_IRQHandler
PUBWEAK RCC_CRS_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
RCC_CRS_IRQHandler
B RCC_CRS_IRQHandler
PUBWEAK EXTI0_1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI0_1_IRQHandler
B EXTI0_1_IRQHandler
PUBWEAK EXTI2_3_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI2_3_IRQHandler
B EXTI2_3_IRQHandler
PUBWEAK EXTI4_15_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI4_15_IRQHandler
B EXTI4_15_IRQHandler
PUBWEAK TSC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TSC_IRQHandler
B TSC_IRQHandler
PUBWEAK DMA1_Ch1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Ch1_IRQHandler
B DMA1_Ch1_IRQHandler
PUBWEAK DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
B DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
PUBWEAK DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
B DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
PUBWEAK ADC1_COMP_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
ADC1_COMP_IRQHandler
B ADC1_COMP_IRQHandler
PUBWEAK TIM1_BRK_UP_TRG_COM_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM1_BRK_UP_TRG_COM_IRQHandler
B TIM1_BRK_UP_TRG_COM_IRQHandler
PUBWEAK TIM1_CC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM1_CC_IRQHandler
B TIM1_CC_IRQHandler
PUBWEAK TIM2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM2_IRQHandler
B TIM2_IRQHandler
PUBWEAK TIM3_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM3_IRQHandler
B TIM3_IRQHandler
PUBWEAK TIM6_DAC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM6_DAC_IRQHandler
B TIM6_DAC_IRQHandler
PUBWEAK TIM7_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM7_IRQHandler
B TIM7_IRQHandler
PUBWEAK TIM14_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM14_IRQHandler
B TIM14_IRQHandler
PUBWEAK TIM15_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM15_IRQHandler
B TIM15_IRQHandler
PUBWEAK TIM16_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM16_IRQHandler
B TIM16_IRQHandler
PUBWEAK TIM17_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM17_IRQHandler
B TIM17_IRQHandler
PUBWEAK I2C1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
I2C1_IRQHandler
B I2C1_IRQHandler
PUBWEAK I2C2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
I2C2_IRQHandler
B I2C2_IRQHandler
PUBWEAK SPI1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
SPI1_IRQHandler
B SPI1_IRQHandler
PUBWEAK SPI2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
SPI2_IRQHandler
B SPI2_IRQHandler
PUBWEAK USART1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
USART1_IRQHandler
B USART1_IRQHandler
PUBWEAK USART2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
USART2_IRQHandler
B USART2_IRQHandler
PUBWEAK USART3_8_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
USART3_8_IRQHandler
B USART3_8_IRQHandler
PUBWEAK CEC_CAN_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
CEC_CAN_IRQHandler
B CEC_CAN_IRQHandler
END
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
|
aegean-odyssey/mpmd_marlin_1.1.x
| 11,305
|
STM32Cube-1.10.1/Projects/STM32F091RC-Nucleo/Examples/CRC/CRC_UserDefinedPolynomial/MDK-ARM/startup_stm32f091xc.s
|
;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
;* File Name : startup_stm32f091xc.s
;* Author : MCD Application Team
;* Description : STM32F091xc/STM32F098xc devices vector table for MDK-ARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == Reset_Handler
;* - Set the vector table entries with the exceptions ISR address
;* - Branches to __main in the C library (which eventually
;* calls main()).
;* After Reset the CortexM0 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;*******************************************************************************
;
;* Redistribution and use in source and binary forms, with or without modification,
;* are permitted provided that the following conditions are met:
;* 1. Redistributions of source code must retain the above copyright notice,
;* this list of conditions and the following disclaimer.
;* 2. Redistributions in binary form must reproduce the above copyright notice,
;* this list of conditions and the following disclaimer in the documentation
;* and/or other materials provided with the distribution.
;* 3. Neither the name of STMicroelectronics nor the names of its contributors
;* may be used to endorse or promote products derived from this software
;* without specific prior written permission.
;*
;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
;
;*******************************************************************************
; Amount of memory (in bytes) allocated for Stack
; Tailor this value to your application needs
; <h> Stack Configuration
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Stack_Size EQU 0x400;
AREA STACK, NOINIT, READWRITE, ALIGN=3
Stack_Mem SPACE Stack_Size
__initial_sp
; <h> Heap Configuration
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Heap_Size EQU 0x200;
AREA HEAP, NOINIT, READWRITE, ALIGN=3
__heap_base
Heap_Mem SPACE Heap_Size
__heap_limit
PRESERVE8
THUMB
; Vector Table Mapped to Address 0 at Reset
AREA RESET, DATA, READONLY
EXPORT __Vectors
EXPORT __Vectors_End
EXPORT __Vectors_Size
__Vectors DCD __initial_sp ; Top of Stack
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window Watchdog
DCD PVD_VDDIO2_IRQHandler ; PVD through EXTI Line detect
DCD RTC_IRQHandler ; RTC through EXTI Line
DCD FLASH_IRQHandler ; FLASH
DCD RCC_CRS_IRQHandler ; RCC and CRS
DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1
DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3
DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15
DCD TSC_IRQHandler ; TS
DCD DMA1_Ch1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler ; DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2
DCD DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler ; DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5
DCD ADC1_COMP_IRQHandler ; ADC1, COMP1 and COMP2
DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC
DCD TIM7_IRQHandler ; TIM7
DCD TIM14_IRQHandler ; TIM14
DCD TIM15_IRQHandler ; TIM15
DCD TIM16_IRQHandler ; TIM16
DCD TIM17_IRQHandler ; TIM17
DCD I2C1_IRQHandler ; I2C1
DCD I2C2_IRQHandler ; I2C2
DCD SPI1_IRQHandler ; SPI1
DCD SPI2_IRQHandler ; SPI2
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD USART3_8_IRQHandler ; USART3, USART4, USART5, USART6, USART7, USART8
DCD CEC_CAN_IRQHandler ; CEC and CAN
__Vectors_End
__Vectors_Size EQU __Vectors_End - __Vectors
AREA |.text|, CODE, READONLY
; Reset handler routine
Reset_Handler PROC
EXPORT Reset_Handler [WEAK]
IMPORT __main
IMPORT SystemInit
LDR R0, =SystemInit
BLX R0
LDR R0, =__main
BX R0
ENDP
; Dummy Exception Handlers (infinite loops which can be modified)
NMI_Handler PROC
EXPORT NMI_Handler [WEAK]
B .
ENDP
HardFault_Handler\
PROC
EXPORT HardFault_Handler [WEAK]
B .
ENDP
SVC_Handler PROC
EXPORT SVC_Handler [WEAK]
B .
ENDP
PendSV_Handler PROC
EXPORT PendSV_Handler [WEAK]
B .
ENDP
SysTick_Handler PROC
EXPORT SysTick_Handler [WEAK]
B .
ENDP
Default_Handler PROC
EXPORT WWDG_IRQHandler [WEAK]
EXPORT PVD_VDDIO2_IRQHandler [WEAK]
EXPORT RTC_IRQHandler [WEAK]
EXPORT FLASH_IRQHandler [WEAK]
EXPORT RCC_CRS_IRQHandler [WEAK]
EXPORT EXTI0_1_IRQHandler [WEAK]
EXPORT EXTI2_3_IRQHandler [WEAK]
EXPORT EXTI4_15_IRQHandler [WEAK]
EXPORT TSC_IRQHandler [WEAK]
EXPORT DMA1_Ch1_IRQHandler [WEAK]
EXPORT DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler [WEAK]
EXPORT DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler [WEAK]
EXPORT ADC1_COMP_IRQHandler [WEAK]
EXPORT TIM1_BRK_UP_TRG_COM_IRQHandler [WEAK]
EXPORT TIM1_CC_IRQHandler [WEAK]
EXPORT TIM2_IRQHandler [WEAK]
EXPORT TIM3_IRQHandler [WEAK]
EXPORT TIM6_DAC_IRQHandler [WEAK]
EXPORT TIM7_IRQHandler [WEAK]
EXPORT TIM14_IRQHandler [WEAK]
EXPORT TIM15_IRQHandler [WEAK]
EXPORT TIM16_IRQHandler [WEAK]
EXPORT TIM17_IRQHandler [WEAK]
EXPORT I2C1_IRQHandler [WEAK]
EXPORT I2C2_IRQHandler [WEAK]
EXPORT SPI1_IRQHandler [WEAK]
EXPORT SPI2_IRQHandler [WEAK]
EXPORT USART1_IRQHandler [WEAK]
EXPORT USART2_IRQHandler [WEAK]
EXPORT USART3_8_IRQHandler [WEAK]
EXPORT CEC_CAN_IRQHandler [WEAK]
WWDG_IRQHandler
PVD_VDDIO2_IRQHandler
RTC_IRQHandler
FLASH_IRQHandler
RCC_CRS_IRQHandler
EXTI0_1_IRQHandler
EXTI2_3_IRQHandler
EXTI4_15_IRQHandler
TSC_IRQHandler
DMA1_Ch1_IRQHandler
DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
ADC1_COMP_IRQHandler
TIM1_BRK_UP_TRG_COM_IRQHandler
TIM1_CC_IRQHandler
TIM2_IRQHandler
TIM3_IRQHandler
TIM6_DAC_IRQHandler
TIM7_IRQHandler
TIM14_IRQHandler
TIM15_IRQHandler
TIM16_IRQHandler
TIM17_IRQHandler
I2C1_IRQHandler
I2C2_IRQHandler
SPI1_IRQHandler
SPI2_IRQHandler
USART1_IRQHandler
USART2_IRQHandler
USART3_8_IRQHandler
CEC_CAN_IRQHandler
B .
ENDP
ALIGN
;*******************************************************************************
; User Stack and Heap initialization
;*******************************************************************************
IF :DEF:__MICROLIB
EXPORT __initial_sp
EXPORT __heap_base
EXPORT __heap_limit
ELSE
IMPORT __use_two_region_memory
EXPORT __user_initial_stackheap
__user_initial_stackheap
LDR R0, = Heap_Mem
LDR R1, =(Stack_Mem + Stack_Size)
LDR R2, = (Heap_Mem + Heap_Size)
LDR R3, = Stack_Mem
BX LR
ALIGN
ENDIF
END
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
|
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.