maximuslee07/llama-2-13b-rockwellautomation
Text Generation • 13B • Updated • 52 • • 1
text stringlengths 36 33.4k |
|---|
<s>[INST] CompactLogix Summary: AENT Error Dear All, We are using L24ER Processor for one of our application connected with the point IO's actually we have 3 panels controlled by a single processor and the controlling mode is through ethernet(All ethernet cables are CAT6) we enabled ring supervisor mode in ETAP as well... |
<s>[INST] How to sort an Array Summary: Sort an array of DINT's based on highest valueHi, I am trying to write some code to generate a 'top faults list' which can be displayed on my HMI. I am using counters to count each fault, then I map the counter.acc value out to an array of DINT's. Each element in the array is lin... |
<s>[INST] Flying step change I use PowerFlex 700 drive in Pos/Spd Prof mode (Speed/Torque Mod P88). The used profil has 3 steps. First : Type: Encode abs.Second : Type: Encode abs.Third : Type : End Hold Pos. This is what I want to do : I command the first step and while it is running, then I command the second one on ... |
<s>[INST] FTview ME and Omron PLC Summary: communicationHello everybody, I have a panel view plus with an Omron plc CJ1M on a ethernet network, but there is no communication. I upgrade the firmware of the panel with the FINS OMRON, but in the communication setup on FT view ME there is nothing. Can someone tell me what ... |
<s>[INST] How to export the current view of a TREND to a REPORT ? or better still PRINT While i like the sound of automated reports , i cant get my head around how you go about sending a preselected TREND chart on a screen , to become a REPORT, that will then become a PDF . the PDF ideally then sent to a known email ad... |
<s>[INST] OPC read of an array Does anyone know how to read an array from CPX using OPC? I have programmed the syncread and can get the first value in the array but how do I get more values? I tried changing the L [/INST] wfk, take a look to the following technote: Aid 8171 Inside there is an example to use OPC in exce... |
<s>[INST] Major Fault T01:C61 PLC1: Compacticlogix 5380 Model:5069-L330ER Software: Studio 5000 V32.011 PLC2:Micro850 Software:CCW V12 Yesterday, we got call from our customer that plant was stopped running in Auto mode and PLC(5069-L330ER) shows Major fault T01:C61 Non-recoverable diagnostics saved in PLC display. and... |
<s>[INST] SLC500 Hi, have a problem with my SLC500 (5/05), every time i power it on, it goes to fault,When i try to go online, tells me, cannot go online with faulted processor (0002h), so i have to download again and go online, then works fine I found this code in the Help0002 Unexpected hardware watchdog timeout. Thi... |
<s>[INST] Micrologix Comm through USB port. Is there a USB cable for communications with a Micrologix? If so, what is the part number? Thanks. [/INST] Rockwell has an item that is used to convert an USB port to an RS-232, to be used with DF1 protocol. Item is 9300-USBS. Normally you may use a 1761-CBL-PM02 cable with i... |
<s>[INST] Best type of device to activate registration input 755 drive Hello, Looking for some advice/thoughts around an eye that I can use to detect the front edge and back edge of an Oriented Strand Board mat moving around 2700 mm/sec. We are getting false detects and I am looking for something that is more accurate.... |
<s>[INST] DriveExecutive program Summary: DriveExecutive backup file not openingDear All drive executive installed on my computer but what could be the reason why the imported driver doesnt open backup files blank page open , does not give error I checked on another computer the versions are correct my computer only op... |
<s>[INST] is it possible to export, edit the .CSV and then import the new tags? Hello, is it possible to export, edit the .CSV and then import the new tags? I can export, then I edit the .CSV adding some tags, then the import error occurs. [/INST] Yes! I've done it a thousand times :-) But you must insure the format do... |
<s>[INST] 865 Medium Voltage Differential Feeder Protection Summary: 865 Medium Voltage Differential Feeder ProtectionHi What is the exact part number for 865 Medium Voltage Motor & Feeder Differential Protection? http://ab.rockwellautomation.com/Circuit-and-Load-Protection/Medium-Voltage/865-Medium-Voltage-Protection ... |
<s>[INST] VPC Control With Powerflex 755 Summary: Can a Powerflex 755 control a VPC servo motor in an electronic gear configuration?I'm looking for a solution to synchronize a servo motor to a master encoder. The servo motor is fairly large (22kW) and an MPL motor did not match all the needed specifications. I know a 5... |
<s>[INST] Commands that not run on HMI Server Hi! ther are some commands that not run on HMI Server, but in standalone app this is a problem. Example: I need a PopUp display to appear when tag value is equal to 123 configuring an event can't do it because display command does not run on HMI Server, so I need deal whit ... |
<s>[INST] FTASecurity Service shutting down As part of my DataView install, I have had to install the security provider FTASecurity. I see that this is a windows service. However after running the instal .bat, everytime I start the service it shutsdown without an error. The help message is: HELPMSG 3534 Can anyone plea... |
<s>[INST] Program Mode not working Dears, I have two 1756-L73K controllers in a redundant configuration. A couple of days ago, the Program Mode, which was working fine, had its icon changed to blue color and is not working anymore. I still can make online changes in Run Mode, but the Program Mode is no longer available... |
<s>[INST] FactoryTalk Transaction Manager As i am new to Factory talk transaction manager.I am using the Factory talk transaction manager for logging the RS View 32 data to SQL server 2005.I have configured it and able to log the data in SQL server columns but my issue is i have to log the array of tags(60) into one pr... |
<s>[INST] Software Versions If I have multiple firmware versions loaded into my PC from one diskette, can I toggle say between version 13 and 15? Thanks in advance for any help provided [/INST] Not sure to have correctly understood your needs.... anyway, you can open multiple instances of the RSLogix 5000 on one PC usi... |
<s>[INST] RsLogix Emulate 5000 Dear All, I want know how to work in the RsLogix 5000 Emulater tool.If anybody having the user guide for this means please let me know or send to my email id(sampath.j@metsys.co.in) [/INST] You can find from the link below http://literature.rockwellautomation.com/idc/groups/literature/doc... |
<s>[INST] CCW Powerflex Instruction Good afternoon, I am using a Micro850 Controller with a PowerFlex 525 VFD. In my programming in CCW im using the RA_PFx_ENET_STS_CMD Function Block to communicate with the VFD over EthernetIP. My question for you guys is, this function block has an Input labeled EnetCntrlTO_sec What ... |
<s>[INST] SFC - Last Scan of Active Steps Hi, I have problem to understand tab 'SFC Execution -> Last Scan of Active Steps'. There is three options: - Automatic reset - Programmatic reset - Don't scan. When i found information about this is short information not explaining what is this. Can anybody help me to explanati... |
<s>[INST] FTV 13 Test Application fails to recognize tags Hardware: PanelView Plus 7 Performance, ControlLogix 5580 Controller ver 34 firmware Software: FTV ME ver 13, Studio 5000 ver 34, all firmware latest on ControlLogix modules After upgrading to ver 13 FTV, and Studio 5000 v 34 running the FTV 'Test Application' f... |
<s>[INST] Problem in writing RSView32 project to CD ROM Hi, I`ve burned the RS View 32 project in to a CD. The memories of both the source and destination are same...... But... when i try to open the project from the CD in the same system, i `m getting the error message as attached [/INST] The application was saved on ... |
<s>[INST] Rslogix 5000 std & 9324-RLDMLPE Summary: Rslogix still reporting editors are not installed Hi, I have been using Rslogix5000 standard edition versions 10, 11, 13, 16 & 17 utilising just ladder, however I now need SFC and function chart so bought 9324-RLDMLPE multilanguage pack and have downloaded the concurre... |
<s>[INST] Rockwell Powerflex 700 faults auto reset EDIT: Removed links to external community probably added by the user via copy/paste of the thread -FL Have 700's and 753 VFD, in the 753 parameter P348 [Auto Rstrt Tries] can't find the parameter for the 700 to activate this feature. TIA.. [/INST] Welcome to Engage, Fr... |
<s>[INST] How to assign HMI tags/constant value for Display Element - Process Library v4.0 on FactorytTalk View ? Good morning everybody. How we can assign HMI tags/constant value for Display Element - Process Library v4.0 ? I mean for example assign value 5 for parameter [/INST] Phong, the procedure for using Global O... |
<s>[INST] Control Net Setup Hi, i need a step by step guide on how to setup a ControlNet network with remote Flex IO. I also need to know how the network addressing of controlnet works and how to set that up. Have already connected the ControlNet CN2 module as the local module and the remote module is the ACN15 CNET ad... |
<s>[INST] update the total in a totalizer block Summary: Can you update the total in a totalizer block to compensate for offline programming time?Can you update the total in a totalizer block to compensate for offline programming time? [/INST] Yes you can, I did it using ST for both current and old total //Object: Plac... |
<s>[INST] FTView 5.1 and Server 2008 Issue - IIS 405 Error I can't get passed the The server... is out of service error when attempting to save a display hosted on a Server 2008 machine from a client running XP. In the IIS logs on the server 2008 machine I get: 2010-02-09 14:20:19 192.168.100.10 PUT /rsviewse/HMI_Serve... |
<s>[INST] error code 21h Summary: error code 21hI have an error code 21h on a 1747 L542 series C processor. I suspected an output card. I removed all of the IO and loaded a blank program into to CPU. I was going to introduce the IO back to the rack one at a time to see which card was causing the issue. The CPU faulted ... |
<s>[INST] L63S Processor not recognized in Factor Talk View ME I'm trying to setup communications to my 1756-L63S Processor (maj. Rev 17) and it is not an option in the factory talk view. The safety partner is there (L63SP), but no L63S. I'm running FTVME Ver.5 CPR 9 with the latest patch installed, and RSLINX Classic ... |
<s>[INST] Do I need to replace all the remote ControlNet module during upgrade Redundancy Controllogix? such... Summary: Do I need to replace all the remote ControlNet module during upgrade Redundancy Controllogix? such as the remote module 1756-CNBR/D located in remote chassis.Dear, When I upgrade the Redundancy syste... |
<s>[INST] PID 4-20 to 2x output Hi All, Can anyone enlighten me please. We have 2 types of actuators that need to be controlled from Contrologix. One type of valve has a typical 4-20ma and this is stratight forawrd to implement. We also have some SDK32 actuators that are mains controlled with 2 wires, one wire drives t... |
<s>[INST] Data read between 1768-L43 and 1769-L33ER PLC. Hello! I am trying to read data from a 1768-L43 PLC which has a 1768-ENBT card and a 1794-AENTR module which has all the variables I need (Picture 1), into a 1769-L33ER PLC which is in an other project. The 1794-AENTR module has an IP address of 192.168.1.11, my ... |
<s>[INST] rslogix 5000 conversion Is there any conversion tool for converting rs5000.acd programs back to rs500.rss programs?Thanks in advance for any input. [/INST] Unfortunately no, there isn't. :smileysad: - fuzzy logic n </s> |
<s>[INST] PowerFlex 700 Frame 5: Replacement of Heatsink Fan Hello, What is the difference between Part No. SK-G9-FAN1-F5 and SK-G9-FAN2-F5 Thanks [/INST] The FAN2 is the new repacement for the FAN1 Hello David9 Thanks for your reply. I have one of the old version on stock. Can i use them without hesitation or are ther... |
<s>[INST] PowerFlex Not Enabled- STS is flushing Yellow Hi all, I have problems with PoweFlex. STS LED is flashing yellow and as I can see from the display the driver is Not Enabled. I have checked in User manual it say if Flashing yellow Flashing, Drive Stopped : A start inhibit condition exists, the drive cannot be s... |
<s>[INST] Open Popup using NetLogic in FTOptix? Hello, all! I am trying to open a popup based on a variables value at runtime. Although, I am having trouble trying to bring this functionality to the project. I can't seem to find any documentations that relates to opening popups/windows using NetLogic. I also tried play... |
<s>[INST] FTView SE Trending I'm looking for a way to load a set of pens to a trend using a pushbutton. Does the trend object support loading preconfigured trends from saved files?In other HMI packages I am able to configure a trend with pens, time span, start time, everything and save that configuration. Add a button ... |
<s>[INST] ControlLogix Data Storage Options Summary: Alternate Ways To Store PLC Data I have a ControlLogix L73 that is being used to collect various data information from HMI and an Oracle database. The information is then used throughout the process between multiple stations. The requirement suddenly grew quite large... |
<s>[INST] RSLOGIX 5000 software Edition selection Summary: Correct software edition selection help for L32E contoller I would like to purchase RSLOGIX 5000 software for compact logix L32E controller , the vendor give me the quote for Mini and Pro edition , Mini version can only be used with the Compact Logix PLCs and e... |
<s>[INST] data logging in Micrologix 1500 Dear Sir,I am doing some project involving data logging using ML 1500 and RSVIEW32 and RSlinx etc. I want to know if the PC is not switched 'ON' for some reason then can the data be retained in PLC itself and data downloaded when PC is switched ON. And if yes then for how long?... |
<s>[INST] Drive executive and Kinetics 6500 over ethernet Summary: Drive executive and Kinetics 6500 over ethernet communucaitionDoes Drive executive work with Kinetics 6500 servo drives over ethernet with RSLinx? [/INST] I just opened it and tried to create a new file - K6500 is not an option. While you could access a... |
<s>[INST] [Help]FactoryTalk View Can't Communication Summary: NULL ??????????,????FT View????/????,?????/?? ??,??Rslinx????,??Logix Designer????? ???????????? FactoryTalk??11 RsLinx??4.21 Logix Designer??30.01 [/INST] Welcome to the Forum ! First of all I suggest not to use chinese ideograms in asking and describing yo... |
<s>[INST] Using a 842-CM-MIP3BA Encoder to perform a follow Summary: Sample code req to create follow with encoder.Hello All Hopefully somebody out there has already performed this and may have some sample code. I am using a 842E-CM-MIP3BA Encoder to Follow a press. The encoder drives a motor that is installed in an of... |
<s>[INST] Using Non AB Absolute Linear Encoder with 1769 platform Hello All! I am using a 1769-L36ERMS contoller for an upgrade to an old machine that utilized ABSOCODER Linear encoders for position read-outs. My delima is that the encoders were previously connected to a signal converter in order to be used with the ex... |
<s>[INST] RSlogix 5000: Alarm (ALMD / ALMA) Hello, I would like to know how I can extract (use) to text of an ALMD or ALMA instruction. The idea is to send it to an Inview. Best regards Hep [/INST] You cannot programmatically access the alarm message string from the alarm tag. Anyway there is a workaround... try to see... |
<s>[INST] factorytalk vantagepoint, factorytalk historian Good morning, excuse me, someone have information about the software`s FactoryTalk VantagePoint / Historian. Some User Manual or information about how work with them. [/INST] Literature for Rockwell software can be found here! https://www.rockwellautomation.com/... |
<s>[INST] Vantagepoint - Report Publish Error Summary: Unable to publish excel report via Xcesius Hi, I'm a first time user of Vantagepoint and Xcelsius. I have created a very simple dashboard report in Xcelsius to show two guages to represent tank level. I have configured Xcelcius setting for publishing following the ... |
<s>[INST] RS 5000 V17 Lockup when pasting online Has anyone had this bug happen in V17. During an online edit, a couple of bits in one rung need to be copied and pasted in another. After the copy, a paste is attempted in another rung, if enabling edits on that rung were skipped, as soon as the paste initiated, the soft... |
<s>[INST] RSNetworx for DeviceNet [Read Only]? Just installed RSNetworx for DeviceNet and when I try to run it, it comes up as Read Only.Operating System is Windows XP Pro SP3.I have heard that there are issues with some software using SP3. Are there any alternatives other than uninstalling SP3? [/INST] Update on my pr... |
<s>[INST] FTView SE V11 Google Chrome web browser I am trying to use Google Chrome browser instead of the IE within FTView SE Environment. any one knows how to do this?. is it even possible? [/INST] nan n </s> |
<s>[INST] Micro820 - can't connect anymore Summary: After downloading MQTT sample code I can't connect to my Micro820 anymoreI have Micro820 and it was working fine until I downloaded MQTT sample code to it. After that I can not gain access to the Micro anymore. I tried over DHCP and connecting it directly by ethernet ... |
<s>[INST] Translation In Siemens STEP 5 or STEP 7 programming software, the method of representation for programming language such as Ladder Diagram, Instruction List and Function Block Diagram is translatable with each other by the software. Is RSLogix 5000 capable to translate Ladder Diagram, Structure Text and Funct... |
<s>[INST] Power Flex 700 scr pre charge board We have a AB Power Flex drive, P/N 20B D 096 A3 ANNANCO, that we lost the precharge board, P/N SK G9-PRE1-V480 (long story) and I am told by my local dist and Rockwell that it is a 10-15 day lead time. My question is do the other 700's have the same precharge board or are t... |
<s>[INST] ALMD (Alarm) in a ADD-ON Instruction? Señores,Quisiera saber si hay alguna complicacion en colocar una instruccion ALMD dentro de un Add-On instruction. Segun una ultima charla con personal de Rockwell nos indicaron que esta version (16) no estaba preparada para eso. Sin embargo las Alarmas funcionan. Can I p... |
<s>[INST] RSView32 7.4 & RSLadder5 Issue I am trying to use the RSLadder5 version 5 ActiveX control in an RSView32 version 7.4 (CPR9) application. I have followed the steps in the manual, but everytime I try to accept the properties window after selecting the .RSP off-line file the RSView32 software crashes with some t... |
<s>[INST] azerty keyboard in RSLogix 500 OMG!!!! Please can some one tell me how to set keyboard on AZERTY mode in RSLogix 500 :smileymad: Thanks! [/INST] Sacre bleu ! RSLogix 500 has no awareness of keyboard layouts; that's purely a Windows operating system setting. Are you encountering an issue with hotkeys, or descr... |
<s>[INST] Modern RS Messenger? So it looks like Messenger is slipping slowly into legacy status along with RSView32, with FactoryTalk being the replacement. Is there a messenger equivalent for FactoryTalk? Does it have the capability to send voice or text via a phone line? [/INST] Nothing new in the works from Rockwell... |
<s>[INST] CompactLogix Ethernet Gateway Problem Summary: Ethernet comms lost because of invalid gateway?Hi, I had an issue with a compactlogix PLC last night and I could use a little advice if anybody has seen this before. I was asked to change the IP address of a 1769-l32e and local HMI which were set for a private ne... |
<s>[INST] How to connect two PV300's to a MicroLogix 1400 Somewhat confused as to how to do this. Any suggaestions. Thx. [/INST] At first it would be interesting to know the PV300 model you have (catalog number)... Then, there could be different solutions, for example: Connect every panelview to a serial port of MX1400... |
<s>[INST] Asset Centre and change domain Summary: Domain server was change on existing FTAC systemHi, I changed domain server today. On another machine is/was running FTAC server. In FT directory are only domain users. I tried to specify again FT Directory location, again used FT Dir wizard, through FT Administration c... |
<s>[INST] Downloading to controller hangs in CCW Summary: Cannot get ccw to download to either 810, 830 or 850 Hi, I have recently installed CCW and am experiencing an issue with downloading project to controller. I am able to communicate with the controller in every other aspect, eg upload, flash etc, however after bu... |
<s>[INST] 1734-AENT Adapter losing connection with its controller. Hi everyone, I'll try to describe the issue I am having in the best way that I can (english is not my native language and I apologize in advance for that). I have a subnet on which I am running a mix of 1734-AENT and 1794-AENT adapters with a CompactLog... |
<s>[INST] TLS-1 GD2 440G-T27121 with release switch .step model Summary: Need a 3D step model for design purposeHi, I just cant seam to find what i am looking for, I need a 3D step model of a TLS-1 GD2 (440G-T27121) lock with release switch mounted. [/INST] Welcome to the Forum ! As far as I can see, the only available... |
<s>[INST] Blocking of User Account on a PVPlus terminal after a number of wrong entries Is there any way to block an account on panelview plus terminal after a particular number of login attempts fails (wrong password) Just like in a windows PC? [/INST] As far as I know, no way... there isn't VBA code in PVP, there are... |
<s>[INST] NoFields Summary: PanelView 5500 Screen saverHow can I change the screen saver on Panel View 5500??????? [/INST] Welcome to the Forum ! As far as I know, actually it can only be enabled or disabled. - fuzzy logic In order to enhance the reputation of the Forum's contributors, please rate the replies you got a... |
<s>[INST] Setup Powerflex 40 in Connected Components Workbench (CCW) Summary: Initial setup of Powerflex40 drive using USB to RS485 converter and CCW.How do I connect the Powerflex 40 drive using RS485, and set it up in Connected Components Workbench (CCW). I don't see instructions in the users manual. I see there are ... |
<s>[INST] Clearing a Micrologix 1100 fault. Is there a way to clear a fault in a ML 1100 without using a PC connected to the PLC? Thank you! [/INST] elrg, you want try to cycle power to it (old good method :smileytongue: ) but I think there are little possibilities to solve... if the error is still there, the controlle... |
<s>[INST] FactoryTalk Directory on Redundancy Hello Fellows, In FTView SE redundant system, how can I set up FT directory of each server (Primary & Secondary) ? I made Primary server as 'Local Host' and Secondary server as remote (look up to primary server's directory).Is it right ? [/INST] Try to take a look to Aid 58... |
<s>[INST] Migration 1746-IN16 to a compactlogix system Summary: 24vac input in compactlogix systemHi there guys, i need to migrate a SLC 5/04 system to a compactlogix system, i have a problem with the io because in the plant i have right now 56 module Honeywell S87B1016 to control a oven for bread, this module have one... |
<s>[INST] Can someone share a sample of .vpd project file of Studio 5000 View Designer Is it readable by notepad editor? [/INST] No, it's not. For a collection of examples, I suggest to start from the following technote: QA44040 You can also find other info in the following post from Keith: LINK fuzzy logic Please don'... |
<s>[INST] downsides of running drive at low frequency for long periods? Summary: What are the disadvantages of running a VFD at a low frequency for an extended amount of time? [/INST] The VFD doesn't care what output frequency, it will run anywhere in it's range all day. The problem is the motor. A normal general purpo... |
<s>[INST] RSLinx 500 and FactoryTalk Transaction Manager We are in process of setting up a new process using RSLINX 500 and FactoryTalk Manager. Is there a control connector which comes with FactoryTalk or is this a seperate purchase? [/INST] I think you are asking if it is possible for FT Transaction Manager to connec... |
<s>[INST] Factory Talk View Site Edition Summary: Logic and Control (Events) I want to run a macros as per tag values. so I created macros and events and in the events I creates a action for macros and created a expressions for executing the macros. Here event in number -1 is executing but when the value in the tag cha... |
<s>[INST] PanelView Plus 6 1000 - Trigger tag on any alarm Summary: PanelView Plus 6 1000 - Trigger tag on any alarmHi, Is it possible to set up a tag to trigger on any alarm? I have an HMI project with around 300 alarm message that trigger on various errors. The client now wants to notify the operator with a flashing ... |
<s>[INST] Tag descriptions stored Summary: Are the tag descriptions stored in the processor?Are the tag descriptions stored in the processor or in the .acd file on my PC? If someone else goes online with the same processor from their PC, will they see my tagname description updates or will they only see what they have ... |
<s>[INST] How do I reset Absolute Reference Status I am having trouble with my Kinetix 2000. After a power cycle I can not seem to get my Absolute Reference Bit to reset. How can I do this. I am not sure on the firmware revision but could this be a problem that I need to upgrade the revision to get it fixed? The machin... |
<s>[INST] MPL Motor Weight I have searched all over the place, including the motor manuals for the MPL motors, and I can not find the motor weights listed anywhere. I want to use an MPL-A330P-MJ74AA and I simply can not find the weight of the darn thing. Can someone point me in the right direction? [/INST] Hi jdiroff, ... |
<s>[INST] FT V SE 5.0 GFX files within imported apa not opening I am currently using release number 5.00.00 CPR 9. I have imported a customers APA file into factory talk view studio se. When i try to open some GFX files I recieve this error message. im not sure where to go with it, due to the lack of information. Any a... |
<s>[INST] 1756-ENBT IP address set to 0.0.0.0. Cannot Change Any Ideas? I have a 4 Slot Contrologix Rack that I am using Soly as a Communications Gateway. Slot-0 is an ENBT Card, Slot-1 is a DH+ Card, and Slot-3 another ENBT Card (The Problem Child), Slot-4 is Empty. Slot-0 is on Company Network. Slot-1 ties to all my ... |
<s>[INST] rslinx gateway reverts to lite verison on rdp sessions Hi all, We have setup RS Logix 5000 and RSLinx Gateway on a server running terminal services, so our engineers can remote in to do some work. I know there was an issue with Node Locked FTA and terminal sessions, but i believe we are using the Concurrent F... |
<s>[INST] FTOptix List selector What is the best way to create a list selector that is similar to the one in ME? [/INST] The best way is the one that suits your application the most. However, the most similar way to the control list selector of ME is probably to use the 'List box' object in Optix. Conceptually, they ar... |
<s>[INST] Two version of RSLogix5000 and one license I have controllers 1756-L56 Rev.15 and 1756-74 Rev.32. I have two activation on workstation. I have to setup another machine with Rockwell software. Is any way I can run RSlogix5000 v15 and Studio5000 v32 with the one license. Somebody told me if I go to FTAM and act... |
<s>[INST] Powerflex 523 and connected components Summary: Connecting to 523 through connected componentsThis may be a simple question but i can seem to make it work. Is here a way to connect to a Powerflex 523 drive through Connected Components Workbench using the USB port on the control module? [/INST] No, the only wa... |
<s>[INST] Atlas Copco Combox-e communication I need to connect to a Combox-E device from an ENBT card. I have the combox-e manual and I am confident that I can set up the WHAT (data read and write) that needs to be communicated to the combox-e.The problem is that no-one seems to know HOW the combox-e is supposed to be ... |
<s>[INST] Factortalk view tag browser Good day everyone. I encountered a problem 2 days ago. My tag browser doesn't come up again when I click to make a connection from an object to it. Any help will be appreciated. The software hangs for over 5 hours and nothing comes up. – / 2 [/INST] Welcome to Engage! Although it c... |
<s>[INST] 5069-IY4 Properties Missing once upgrading I had to install version 33, 34, and 35 so I am not sure what version created this anomaly but now even in V32 when I try to configure the card the thermocouple input ranges are missing. Normally you can select type J, K, etc but the only option is -100mV to 100mV. T... |
<s>[INST] Converting EAS data into a CSV tag name data base Summary: I need to know how to convert EAS symbol data to a CSV format to create a tag data baseHello, I need to replace an obsolete third party HMI, a Quick Panel Jr.. I have selected an Automation Direct C-More Micro panel which is DF1 ready and is Tag Compa... |
<s>[INST] 2711C-T3M file transfer by rs232(db9) Is it possible to upload application file from 2711C-T3M via rs232(db9)? [/INST] Hi @FiveCents and welcome to Engage ! Please note that the Upload feature for PanelView Component is not implemented inside CCW. So basically the answer is: no, it's not possible. There are c... |
<s>[INST] RSlogix5000 V18.01 - with full toolkit license I installed the V18.01 over V18.00 and since than, it can not find the activation license. Anyone with ideas? ** picture with license number removed ** Ceeya [/INST] I'm not sure I would display my serial number for others...but are you having issues with any of ... |
<s>[INST] SmartGuard 600 1752-L24BBBE, I cannot find a EDS file for this product, also how do you program it, I was told by my rep that I could use RSNetworks for Ethernet/IP to set it up, but unlike the DeviceNet version, I do not have a Logic tab, probably because I cannot find a EDS file, any help would be appreciat... |
<s>[INST] drag and drop from different routines in ver 31 Summary: could drag and drop from different routines prior to rev 31, can't do it anymore in ver 31just upgraded to rev 31 in Studio and have found out that one of my favorite functions which was dragging and dropping tags from one routine to another is not poss... |
<s>[INST] CS3000 for Windows XP Dear All, Can we access the CS3000 application for Windows XPI have tried to communicate the FlexPak 3000 using via Windows XP butCommunication Error. I have read the CS3000 Manual. CS3000 only require for Windows 3.1, NT and 98. Thanks [/INST] Check to make sure your cabling is correct.... |
<s>[INST] 20 COMM D FW VERSION Summary: ERRORS WHEN CHANGING 20 COMM D MODULE WITH DIFFERENT FIRMWARE [/INST] I'm getting some faults related to PORT 5 adapter on a PF70 with device net adapter 20 COMM D, so after troubleshooting it I decided to change 20 COMM D comms adapter, the one that is installed is a 20 COMM D F... |
<s>[INST] ME Alarm List I have a PV 600 Plus running FT ME. In the alarm list after an alarm is inactive it randomly stays in the alarm list. In Alarm List Properties Display I have both of the Inactive conditions turned off. I have both the Active conditions turned on. Since I have more than one PV I cannot use the a... |
<s>[INST] RSView SCADA Bulk Aknowldgement of Alarms In our project, there is two ways of aknowledging alarms, either a Bulk Aknowldgement or individual aknowledgement of alarms.When we do individual acknowledgements of alarms they acknowledgement bit goes through sucessfully to the PLC to the respective alarm block. Wh... |
<s>[INST] PanelView 300 Hi everybody, I have a problem with a panleview 300 micro, and I would really appreciate any help with it. The thing is that I recently downloaded an application to this panel and as soon as it finished, it lost the communication. I have been try to communicate with it again but I haven´t had lu... |
<s>[INST] GuardPLC 1600 with 1734 Point I/O over Ethernet IP I am trying to get work 2 OB8 Point I/O cards working with GuardPLC. I can scan the first card, but can not the 2nd On the configuration with OB4 cards two of them are working fine - this is confirmed by Rockwell Support - they haven't OB8 on stock to test it... |
End of preview. Expand in Data Studio
README.md exists but content is empty.
- Downloads last month
- 22
Models trained or fine-tuned on maximuslee07/raqna10k