_id stringlengths 2 6 | text stringlengths 4 46k | title stringclasses 1
value |
|---|---|---|
d19401 | From http://hsivonen.iki.fi/xhtml2-html5-q-and-a/ :
If I can use any doctype for XHTML5, how can browsers tell XHTML 1.0 and XHTML5 apart?
They can’t and they don’t need to. By design, a user agent that implements XHTML5 will process inputs authored as XHTML 1.0 appropriately.
A: There is no XHTML 5. Currently there i... | |
d19402 | ADSL is generally not a fixed IP, which means that the server does not recognize it.
As I understand it, you want to balance the load.
Analyzing your doubt. I leave my case study.
1 - How each server is separate.
Place a fixed IPv4 from there, create a fixed DNS and point to the corresponding fixed IP. Also place a dom... | |
d19403 | A common source of problems when programs that execute successfully as an interactive user, but fail when run as a service, is the user settings surrounding the execution have changed. For example, when you run Gradle, there are settings in %USERPROFILE% \ .gradle (typically c:\users\<username>, which for you logged i... | |
d19404 | Why do I only have to escape the last \?
Because only after the last \ there is a symbol (") which together with \ forms an escape sequence — \" (escaping the role of the quote symbol " as a string terminator).
If \ with subsequent symbol(s) don't form an escape sequence, it's kept as is, i.e. as the backslash symbol... | |
d19405 | Looks like the problem is you're assigning the list you build to the same name as the output file. You're also reading all of the lines out of the file and not assigning the result anywhere, so when your list comprehension iterates over it, it's already at the end of the file. So you can drop the readlines line.
def ne... | |
d19406 | They have semantic differences. A fieldset is designed to encapsulate a group of fields, inputs or controls. Sections and headings are more designed for actual text content (your actual copy in the literary sense). | |
d19407 | It is not related to the type of the task, it's a typical << misunderstanding.
When you write
project.task('hello') << {
println project.greeting.message
}
and execute gradle hello, the following happens:
configuration phase
*
*apply custom plugin
*create task hello
*set greeting.message = 'Hi from Gradle'
... | |
d19408 | fileName is an array of 30 uninitialized pointers to char. *fileName is the same as filename[0], which is an uninitialized pointer to a char. You cannot use this pointer for anything but assigning it a valid value. You are not doing that, though, and instead you're trying to read data to it, with predictably catastroph... | |
d19409 | You will need to use a closure to implement this correctly. For example, something like this.
for(var i in companyTickerList) {
console.log('i = ' + i);
//construct url
var url = base_url + companyTickerList[i];
console.log('url = ' + url);
function(i){
request(url, functon(error, response, xml) {
i... | |
d19410 | You can write it like this:
#include <iostream>
#include <sstream>
void log(const std::ostringstream& obj) {
std::cout<<obj.str();
//Do something meaningful with obj that doesn't modify it
}
void gol(const std::string& obj) {
std::cout<<obj;
//Do something meaningful with obj that doesn't modify it
}
i... | |
d19411 | 1.Is autocommit turned on or turned off on your database connection ?
2. In DB2, there are chances of deadlock when you are firing a select query and
update query within same transaction.
3. If the auto commit is turned off and you have fired a select query on the
table then try committing or rollback that ... | |
d19412 | You're catching the OperationCanceledException in your DuplicateSqlProcsFrom method, which prevents its Task from ever seeing it and accordingly setting its status to Canceled. Because the exception is handled, DuplicateSqlProcsFrom finishes without throwing any exceptions and its corresponding task finishes in the Ran... | |
d19413 | You need to lsiten to props changes during componentDidUdpate like this, to check:
componentDidUpdate() {
if (this.props.clearColor && this.state.bgColor) {
this.setState(this.initialState)
}
}
Moving the state up is reacty and you could be using that.
I would recommend that or moving it into a context... | |
d19414 | if you have a string, just loop on the string and output the characters to your stringstream
std::string name = "name1";
std::stringstream ss;
for(auto c : name)
ss << std::static_cast<int>(c);
ss << ";";
As a side note:
uint32_t* var = (uint32_t*)tab;
is totally useless, you don't need a pointer.
A: i'm not sure ... | |
d19415 | Consider creating a custom filter that uses Number.prototype.toLocaleString()
console.log(Number(8).toLocaleString('en',{style: 'currency', currency: 'USD'}))
console.log(Number(8).toLocaleString('de',{style: 'currency', currency: 'EUR'}))
A: Something like this:
{{ lang == 'tr' ? '₺' + item.price : item.price + ... | |
d19416 | You can set automaticallyAdjustScrollViewInsets to false. | |
d19417 | The pROC::roc function doesn't accept sampling weights, so it's not just a matter of data formats -- you can extract a data frame from a survey object with model.frame, but roc still won't be doing a weighted analysis.
There's a WeightedROC package that fits weighted ROC curves. You could do something like (not tested ... | |
d19418 | Your date format string is wrong. Use dd instead of DD for the days.
According to the documentation, DD means "day of year", while you need dd, which means "day of month".
Change the first line to:
DateTimeFormatter d_t = DateTimeFormat.forPattern("dd-MMM-YYYY HH:mm"); | |
d19419 | in *.gemspec:
s.platform = 'ruby'
possible platform values:
ruby
C Ruby (MRI) or Rubinius, but NOT Windows
ruby_18
ruby AND version 1.8
ruby_19
ruby AND version 1.9
mri
Same as ruby, but not Rubinius
mri_18
mri AND version 1.8
mri_19
mri AND version 1.9
rbx
Same as ruby, but only Rubinius (not MRI)
jruby
JRuby
... | |
d19420 | I believe this has to do with the system-ui font. I've made a quick Codepen to check it out. If you enable the "Bold Text" option on iOS it will change the font weight for the p that uses the system-ui as its font-family. And you can see that the p with the custom font, Poppins, isn't bold. | |
d19421 | redirect_to login_path, :notice => "Please log in to continue" is a normal expression in Ruby that does not return false (or nil, see the source code), so program execution continues (to check the second part after AND) and return false can be executed.
A: The and is there only for you to be able to write the return f... | |
d19422 | I have used load ajax for this
$('#AREA_PARTIAL_VIEW').load('@Url.Action("Insert_Partial_View","Customers")'); | |
d19423 | Code changed to retrieve all the inputs inside the cloned div and change its name/id.
<script>
$(document).ready(function(){
$("#nmovimentos").change(function () {
var direction = this.defaultValue < this.value
this.defaultValue = this.value;
if (direc... | |
d19424 | Simply because your query is returning a null cursor object.
So I would suggest two modification in your getStore function to avoid any crash issue.
This is a query to find a String object. So the query should look like this.
Cursor c = db.rawQuery("select * from " + TABLE_NAME + " where "
+ COL_STORE_ID + "='" ... | |
d19425 | I don't have enough reputation to comment on answers, but I just wanted to note that downloading the JSR-311 api by itself will not work. You need to download the reference implementation (jersey).
Only downloading the api from the JSR page will give you a ClassNotFoundException when the api tries to look for an imple... | |
d19426 | Yes, it's possible for an app to serve both static files and dynamic content. Actually there's nothing magical required for it, this is normal for most web applications.
Your configuration looks ok. One thing you should change: the package of your go file.
Don't use package main, instead use another package and make su... | |
d19427 | You shouldn't need a timeout here.
function scheduleDelayedCallback() {
var now = new Date();
if (now.getTime() - lastEvent.getTime() >= 750) {
// minimum time has passed, go ahead and update or whatever
$("#main").html('Lade...');
// reset your reference time
lastEvent = now... | |
d19428 | Vagrant plays nicely with AWS (via vagrant-aws plugin).
Vagrant seems to play nicely with Windows as well since version 1.6 and the introduction of WinRM support (ssh alternative for Windows).
However AWS plugin doesn't support WinRM communicator yet. So you'll need to pre-bake your Windows AMIs with SSH service pre in... | |
d19429 | Updated
This is related to sequence A051026 : Number of primitive subsequences of {1, 2, ..., n} in OEIS, the Online Encyclopedia of Integer Sequences.
I don't think there is any easy way to calculate the terms. Even the recursive computations are not trivial, except when n is prime where:
a(n) = 2 * a(n-1) - 1
Both ... | |
d19430 | What you need is a tooltip plugin. There are plenty of them.
Check out this list: https://cssauthor.com/jquery-css3-hover-effects/
A: <img class="enlarge-onhover" src="img.jpg">
...
And on the css:
.enlarge-onhover {
width: 30px;
height: 30px;
}
.enlarge-onhover:hover {
width: 70px;
height: 70p... | |
d19431 | This seems to work quite well:
files = list.files(path=".", pattern="MCL")
table_list <- lapply(X = files, FUN = read.table, header=TRUE)
combined <- Reduce(f = merge, x = table_list)
We first loop over the table names with lapply and read each one in, returning a list. By using header=TRUE we can avoid having to re... | |
d19432 | Based solely on the query in your OP and the records in your image nothing would be returned. It would only return if both start_range_cost AND end_range_cost were exactly 3000 which none of the records match, but this is just because you've got the < and > signs flipped around. Try using BETWEEN, I feel it's less pr... | |
d19433 | The elements within the transclude directive aren't receiving the same scope. If you use the angualr $compile method and apply the scope of the transclude directive to the scope of the child directives it should work. The following should be added to your simpleTransclude directive:
link: function(scope, element) {
... | |
d19434 | With the current stable Version of Loopback you cannot filter on Level 2 properties for Relational Databases. These are some of the Issues raised on the same in Loopback
https://github.com/strongloop/loopback/issues/517
https://github.com/strongloop/loopback/issues/683
As a matter of fact you might want to look into n... | |
d19435 | The problem with your regular expression is that you have the both the parentheses and the word "PROPERTY" inside of the brackets. Brackets are for specifying a set of characters, not strings, any member of which will match.
A simple (although probably not optimal) variation that should work for you is:
(PROPERTY\([A-... | |
d19436 | Floating point numbers (in all languages, not just Tcl) represent most numbers somewhat inexactly. As such, they should not normally be compared for equality as that's really rather unlikely. Instead, you should check to see if the two values are within a certain amount of each other (the amount is known as epsilon and... | |
d19437 | You could use np.where:
>>> edge = np.array(EDGE)
>>> edge[edge > 0].min()
0.5
>>> np.where(edge == edge[edge > 0].min())
(array([1, 2]), array([0, 1]))
which gives the x coordinates and the y coordinates which hit the minimum value separately. If you want to combine them, there are lots of ways, e.g.
>>> np.array(n... | |
d19438 | First calculate the statistics you need to use.
proc summary data=sashelp.cars ;
var weight horsepower enginesize length ;
output out=stats
min(weight horsepower)=
max(weight horsepower)=
mean(enginesize length)=
/ autoname
;
run;
Then use those values to generate your "grid".
data want;
set st... | |
d19439 | The issue here is that when you say
NORTH_EAST = [x_coordinate + 1, y_coordinate - 1]
You construct a list of two values, which are computed and stored at the time. They will not update based on the values of x_coordinate and y_coordinate changing.
You will need to recalculate the values on each loop to get the behav... | |
d19440 | When you return a copy of the object, that creates a new object, which is what you want.
So one destructor is the for the copy, and one is for the original.
In other words your code works, but you can't see the copy constructor, add the line
example(const example& cp) : some_int(cp.some_int){std::cout << "copy cons... | |
d19441 | You need to install Visual Studio Test Agent first in your remote/test machine. Then using a remote access tool such as PsExec from PsTools you use MSTest.exe or VSTest.Console.exe to run a dll. You can script this in bat file on your own machine to trigger loading of test dlls to the remote machine and automated runni... | |
d19442 | You can create a decorator, like this:
def checkargs(func):
def inner(*args, **kwargs):
if 'y' in kwargs:
print('y passed with its keyword!')
else:
print('y passed positionally.')
result = func(*args, **kwargs)
return result
return inner
>>> @checkargs
.... | |
d19443 | I just wanted to understand if we are creating any additional threads that is responsible for this task threads?
Yes - from the documentation:
Corresponding to each Timer object is a single background thread that is used to execute all of the timer's tasks, sequentially. | |
d19444 | Consider it as a gaps-and-islands problem and use the following trick to group consecutive rows together:
WITH cte1 AS (
SELECT *, Year - ROW_NUMBER() OVER (PARTITION BY Name ORDER BY Year) AS grp
FROM t
), cte2 AS (
SELECT *, COUNT(*) OVER (PARTITION BY Name, grp) AS grp_count
FROM cte1
)
SELECT *
FROM... | |
d19445 | It's possible.
Using Console APIs in WebView
Just override WebViewClient for your WebView like this:
val myWebView: WebView = findViewById(R.id.webview)
myWebView.webChromeClient = object : WebChromeClient() {
override fun onConsoleMessage(consoleMessage: ConsoleMessage?): Boolean {
consoleMessage?.apply {
... | |
d19446 | How many results do you get when you fire the reuquest directly on your database? Which result are you getting?
Is it possible that there is an error with your custom route? Do you have two server running?
A: My error was stupid. I was sending a null value in my term variable:
let obj = 'term='+term;
And it was neces... | |
d19447 | With Postgresql 9.5
UPDATE test SET data = data - 'v' || '{"v":1}' WHERE data->>'c' = 'ACC';
OR
UPDATE test SET data = jsonb_set(data, '{v}', '1'::jsonb); | |
d19448 | Below statement will just declare an array but will not initalize its elements :
StringBuffer[][] templates = new StringBuffer[3][3];
You need to initialize your array elements before trying to append the contents to them. Not doing so will result in NullPointerException
Add this initialization
templates[0][0... | |
d19449 | Got the same issue with Qt5.2.0 on Mavericks...
I found a work around: append a dummy file name to the directory you want to select.
However, be sure not to do this on Windows because the user will see it.
QString dir = "/Users/myuser/Desktop";
#if defined(__APPLE__)
dir += "/MyFile.txt";
#endif
fn = QFileDialog::getOp... | |
d19450 | Your way of chaining .Where() into .Where() is technically correct. The problem is that the outer .Where() under the current situation does not evaluate to boolean. However, that's a requirement. The purpose of a .Where() is to define a filter for a collection that results in a subset of that collection. You can check ... | |
d19451 | I have the same issue with eval-source-map, so I finally switch back to source-map.
However, I do find two approaches to make eval-source-map work, quite dirty though.
*
*Insert a debugger in the JS file you are working on. Open DevTools before you visit the page, then the debugger will bring you to the right place,... | |
d19452 | There is a problem in param values. Change param values as follows.
$stmt = $this->conn->prepare("SELECT ur.restaurant_id, ur.service_rating, ur.food_rating, ur.music_rating FROM user_ratings ur , user u WHERE u.user_id = ? AND u.user_id = ur.user_id AND ur.rating_id = ?");
$stmt->bind_param("ii", $user_id,$rating_i... | |
d19453 | Use it something like this
for API level 5 and greater
@Override
public void onBackPressed() {
super.onBackPressed()
if (keycode == KeyEvent.KEYCODE_BACK) {
if (drawer.isDrawerOpen(GravityCompat.START)) {
drawer.closeDrawer(GravityCompat.START);
} else {
finish(... | |
d19454 | Left Join and Where condition can help you.
SELECT *
FROM teachers t
LEFT
JOIN courses c
ON t.id = c.teacher_id
WHERE c.teacher_id IS NULL
A: Teachers don't usually "take" courses. They "teach" courses. Students "take" courses.
That said, not exists seems appropriate:
SELECT t.*
FROM teachers t
W... | |
d19455 | You can define single AEVL class for both AEVL2020 and AEVL2020 as follow:
public class AEVL
{
public string user_id { get; set; }
public string employee_id { get; set; }
public string name { get; set; }
public string privilege { get; set; }
}
public class Registers
{
public List<AEVL> AEVL2020 {... | |
d19456 | data is sent as the request body. What you really want is headers.
From the docs:
*
*data – {string|Object} – Data to be sent as the request message data.
*headers – {Object} – Map of strings or functions which return strings representing HTTP headers to send to the server. If the return value of a function... | |
d19457 | It depends on what exactly you want to mutate.
*
*If you really want to reassign the field values::Vector{Int64} itself, then you have to use a mutable struct. There's no way around that, because the actual data of the struct changes when you reassign that field.
*If you use an immutable struct with a values::Vector... | |
d19458 | To generate a link that is universal and not specific to an App Store Country do the following
Use
itms-apps://**ax.itunes**.apple.com/app/yourAppLinker
where yourAppLinker is the part of the link generated in (http://itunes.apple.com/linkmaker), as in Matthew Frederick's post, which contains your application name a... | |
d19459 | You need to create a Windows Runtime component by creating a class library from the "Visual C#" -> "Windows Metro Style" -> "Class Library" template. Then in the properties for that class library project you need to mark the output type as "WinMD File"
Better instructions can be found here:
http://msdn.microsoft.com/en... | |
d19460 | You should take a look at how "Twitter Bootstrap" outlines their media query structure at http://getbootstrap.com/css/#grid-media-queries
Try comparing those with your own written media query structure, and if you are still stuck, you should check out Chris' written media query set at https://stackoverflow.com/a/214379... | |
d19461 | try:
$('ul li').on('mouseenter mouseleave', function() {
$(this).find('.overview').toggleClass('top_out');
});
A: You have to use the hovered over li as the context:
$("ul li").hover(function(){
$(".overview", this).toggleClass("top_out");
});
Rather than .hover(function() ... you may want to use:
.on('m... | |
d19462 | You can use the even rule to target all the even children, like this.
li:nth-child(even) a {
color: white;
}
Here's a reference: https://www.w3.org/Style/Examples/007/evenodd.en.html
A: In your first example, you are saying "the nth li" of which there are several. In the second example, you are saying "the nth a i... | |
d19463 | Due to your current indentation, coordpairs is only seeing the last value of longitudes each time it loops through y.
If you would like to use loops, you could do something like this (assuming your longitudes and latitudes lists are the same length)
coordpairs = []
for coord_num in range(len(longitudes)):
coord_pai... | |
d19464 | You should use Enumerable.Skip(Int32)
public IEnumerable<PersonViewModel> GetAllStudents(int page)
{
const int PageSize = 2;
IEnumerable<Person> dbPersons = _repo.getPersons().OrderBy(s => s.ID).Skip(page * PageSize).Take(PageSize);
List<PersonViewModel> persons = new List<PersonViewModel>();
foreach(v... | |
d19465 | You just drag an NSMenu from the object library and release it over the segment you want it to be attached to. | |
d19466 | You didn't close
conn.Open();
Add conn.Close in try-catch's finally
finally
{
conn.Close();
}
Add max pool size in your connection string
Like this
public const String connectionString = "server=localhost; uid=root; pwd=; database=it_map;max pool size=5;"; | |
d19467 | As you can see in the error message, rails is looking for a file called reviews/create[extension] or application/create[extension] and extensions allowed are .erb, .builder, .raw, .ruby, .coffee or .jbuilder.
I suggest to change you ajax call to ask for js, not json, create a file called reviews/create.js.erb, and add... | |
d19468 | Well as @kfx pointed out in the comments const struct aes_128_driver AES_128 was shadowing the global variable. | |
d19469 | I copied your example into a test file, and it works fine. I also can't see how the error message in your example could be generated by the current version of noUiSlider, so I'd suggest using the latest version of noUiSlider and the latest version of jQuery.
It would also be a good idea to only run this JS after the pa... | |
d19470 | It's been a looong time since I used FaxComExLib, but if memory serves, you need to install the Fax printer or something for XP, it is not installed by default. | |
d19471 | why do you wish to have an empty array as a default column values? That isn't correct to assign an empty array to value of DB column, because it must be specifically serialized. Instead define methods in model, which will return empty array for specific column:
def some_field
read_attribute(:some_field) || []
end
d... | |
d19472 | item is a string, so borderLength + item + 1 actually does string concatenation instead of arithmetical addition. Assuming map contains numerical values, you should write map?values, not map?keys. | |
d19473 | You can assign the output of the command to a string.
Use 2>&1 to redirect stderr to stdout and thus capture all the output.
str = `git pull origin master 2>&1`
if $?.exitstatus > 0
...
elsif str =~ /up-to-date/
...
else
...
end | |
d19474 | Thanks to ekhumoro for guiding me to the answer. The QsciAPIs class has a load method, and PyQt comes with a set of api files. Below is the code that does proper autocompletion in the manner I was looking for:
"""Base code originally from: http://kib2.free.fr/tutos/PyQt4/QScintilla2.html"""
import sys
import os
impo... | |
d19475 | Check this
var frequency = 10000;
var data = {
1: {duration:500, sleep:1000},
0: {duration:500, sleep:500}
}
var audio = new window.webkitAudioContext();
//function creates an Oscillator. In this code we are creating an Oscillator for every tune, which help you control the gain.
//If you want, you can try cr... | |
d19476 | You seem to be describing the function of the Silverlight Popup class. | |
d19477 | So, you are using discord.js v13 which is a lot different from the previous version which is v12. In v13, it is compulsory to add intents.
You can read this for more information: here
A: new Discord version V13 requires you to set the intents your bot will use.
First, you can go to https://ziad87.net/intents/ where yo... | |
d19478 | Are you sure you have the same zookeeper clickhouse settings on all 3 nodes?
Do you insert into Distributed table or insert into ReplicatedMergeTree?
For first case, check on node-2
SELECT * FROM system.distribution_queue FORMAT Vertical
SELECT * FROM system.clusters FORMAT Vertical
and compare <remote_servers> sectio... | |
d19479 | You are using ODBC so you must only specify DSN:
DSN=myDsn;Uid=myUsername;Pwd=;
The jdbc:odbc is just a designation that the java driver uses and is not carried over to ODBC in .NET. I would suggest you use ADO.NET if that is an option.
or this for the TDConnection:
Data Source=myDsn;User Id=uid;Password=pwd; | |
d19480 | I think you may be slightly confused about <br> tags. <br> or <br /> are self-closing/void elements/empty tags:
https://www.w3schools.com/html/html_elements.asp (under the empty html section)
http://xahlee.info/js/html5_non-closing_tag.html
<br> is an empty element without a closing tag (the <br> tag defines a line b... | |
d19481 | A modal window is loaded via javascript in the same page. If you want to open a new browser window or tab (popup window) you should add the atribute type="_blank" in your link (no javascript needed).
<a href="popoup_url" target="_blank">Open popup</a> | |
d19482 | onChange = {e => this.changeHandler(e, el.id) }
grab el.id on changeHandler and store in state, use this state in your api call. | |
d19483 | Replace your input loop with this:
std::string str;
while (std::getline(txtfile, str)){
vfile.push_back(str);
}
Using ios::eof() as a loop condition almost always creates a buggy program, as it did here. In this case, using eof() has two problems. First, eof() is only set after the read fails, not ... | |
d19484 | You need to do a few things.
First, in calculate.py call the mytest function, add the following at the end:
if __name__ == '__main__':
print(mytest())
Now when you execute the calculate.py script (e.g. with python3 /path/to/calculate.py), you'll get the mytest's return value as output.
Okay, now you can use subpro... | |
d19485 | by tag mysqli I can assume that You're using PHP.
So it can be done this way:
$year = '2015';
$data = [];
foreach(range(1, 12) AS $month) {
$data[$month] = [
'date_year' => $year,
'date_month' => $month,
'nb_item' => 0
];
}
$q = "SELECT
year(feed_date) as date_year,
month(... | |
d19486 | startActivity() involves inter-process communication, even when the activity you are starting is in the same app and the same process. Android will ignore your subclass, because the OS process that handles startActivity() requests cannot use your subclass, as that is in your app, and the OS process is not your app. And... | |
d19487 | You will have to fetch file field from request Object with following code:
form = UpdatePhotoForm(data=request.POST, files=request.FILES, instance=request.user.person) | |
d19488 | Assuming you want to match an entire string, you may use something like the following:
^[a-zA-Z_](?:\w|(?<=\w)\.(?=\w))*(?:\(\d+\))?$
Demo.
If you want to match partial strings, you'd need to decide what boundaries are allowed. Otherwise, "SomeVar(10" would have a match (i.e., what comes before (), for example.
Notes:... | |
d19489 | What worked for me was to replace localhost with container links. I found this tutorial helpful.
parse-server:
...
environment:
...
DATABASE_URI: mongodb://mongo:27017/myDB
links:
- mongo:mongo
mongo:
image: mongo
volumes:
- /mnt/database/mongodb
TLDR: tutorial: docker-compose... | |
d19490 | You can use isLength() option of the express-validator to check max and min length of 5:
req.checkBody('partnerid', 'Partnerid field must be 5 character long ').isLength({ min: 5, max:5 });
A: You can use matches option of express-validator to check if the partner field only contains alphanumeric and has a length of... | |
d19491 | Try it:
parent.window.location = "http://your.url.com";
I think it's enough. | |
d19492 | use val() to set textarea's value
var string = "your html content";
var textarea=$('<textarea>').val( string).appendTo( containerSelector); | |
d19493 | 'scaled' using plt
The best thing is to use:
plt.axis('scaled')
As Saullo Castro said. Because with equal you can't change one axis limit without changing the other so if you want to fit all non-squared figures you will have a lot of white space.
Equal
Scaled
'equal' using ax
Alternatively, you can use the axes cl... | |
d19494 | ... It's ok ! I found my problem. I forgot to erase the tatoo out of a json list containing them all.
It looks like this now :
for(var i=0; i< tatoos.length; i++){
if(tatoos[i].url === url ){
tatoos.splice(i, 1);
}
}
$(this).removeClass('ui-... | |
d19495 | You can manage Azure NSG configuration via ARM template, Teffaform and Ansible.
*
*ARM template
1,You can check out below examples to create ARM Template to manage Azure NSG.
Create a Network Security Group.
How to create NSGs using a template
Please check the official document for more examples.
2, After the ARM te... | |
d19496 | Just looking at the code that you posted here, I wonder if the last parameter is indeed the value that you wanted to pass to the constructEvent function. it reads webHookPaymentIntent. I wonder if this should really be the webhook signature secret? It may be that it really is the webhook secret value, but just named a ... | |
d19497 | In principle, it's good. In practice, though, it has at least the following problems:
*
*not all fonts look good at all sizes and not all browsers do a good job at approximating them. Most problems appear when elements start being animated and, because of the approximation techniques, text looks blurry while the an... | |
d19498 | You can build your Window, and set the Background="Transparent" like so:
<Window ...
AllowsTransparency="True"
WindowStyle="None"
Background="Transparent" >
This gives you a window with a transparent background and no border. | |
d19499 | Try this:
SELECT $path FROM ( TRAVERSE out() FROM (select from entities where id ='A') WHILE $depth <= N ) where id ='B' | |
d19500 | WSO2 Developer Studio uses Eclipse bpel plugin to add support for bpel creation for WSO2 BPS. This BAM publishing bpel extension activity that you are referring to, is a custom extension developed by WSO2 and default bpel editor is not aware of this extension. This is why it gives syntax errors when you add this extens... |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.