code stringlengths 0 21.5M | repo_name stringlengths 4 92 | path stringlengths 1 189 | language stringlengths 0 26 | license stringclasses 11
values | size int64 0 21.5M |
|---|---|---|---|---|---|
#!/bin/sh
BOARD_DIR="$(dirname $0)"
GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg"
GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
rm -rf "${GENIMAGE_TMP}"
genimage \
--rootpath "${TARGET_DIR}" \
--tmppath "${GENIMAGE_TMP}" \
--inputpath "${BINARIES_DIR}" \
--outputpath "${BINARIES_DIR}"... | shibajee/buildroot | board/atmel/sama5d3_xplained_mmc/post-image.sh | Shell | mit | 351 |
# Image for SD card boot on Atmel SAMA5D4 Xplained boards
#
image boot.vfat {
vfat {
files = {
"zImage",
"at91-sama5d4_xplained.dtb",
"at91-sama5d4_xplained_hdmi.dtb",
"at91-sama5d4_xplained_pda4.dtb",
"at91-sama5d4_xplained_pda7.dtb",
"at91-sama5d4_xplained_pda7b.dtb",
"boot.bin",
"u-boot.bi... | shibajee/buildroot | board/atmel/sama5d4_xplained_mmc/genimage.cfg | INI | mit | 553 |
#!/bin/sh
BOARD_DIR="$(dirname $0)"
GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg"
GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
rm -rf "${GENIMAGE_TMP}"
genimage \
--rootpath "${TARGET_DIR}" \
--tmppath "${GENIMAGE_TMP}" \
--inputpath "${BINARIES_DIR}" \
--outputpath "${BINARIES_DIR}"... | shibajee/buildroot | board/atmel/sama5d4_xplained_mmc/post-image.sh | Shell | mit | 351 |
/*
* Device Tree Generator version: 1.3
*
* (C) Copyright 2007-2008 Xilinx, Inc.
* (C) Copyright 2007-2009 Michal Simek
*
* Michal SIMEK <monstr@monstr.eu>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free... | shibajee/buildroot | board/avnet/s6lx9_microboard/lx9_mmu.dts | dts | mit | 9,493 |
CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE="rootfs.cpio"
CONFIG_INITRAMFS_COMPRESSION_GZIP=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EXPERT=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
# CONFIG_HOTPLUG is not set
# CONF... | shibajee/buildroot | board/avnet/s6lx9_microboard/lx9_mmu_defconfig | none | mit | 1,744 |
This is the buildroot board support for the Avnet Spartan6 LX9 MicroBoard.
The Avnet S6LX9 Microboard is a small USB-Stick sized module containing
a Spartan6 FPGA capable of running the Microblaze softcore processor
together with RAM and FLASH memory.
The board can be bought from Avnet (avnet.com) or from Trenz Elect... | shibajee/buildroot | board/avnet/s6lx9_microboard/readme.txt | Text | mit | 2,591 |
image boot.vfat {
vfat {
files = {
"MLO",
"u-boot.img",
"zImage",
"uEnv.txt",
"am335x-bone.dtb",
"am335x-boneblack.dtb"
}
}
size = 16M
}
image sdcard.img {
hdimage {
}
partition u-boot {
partition-type = 0xC
bootable = "true"
image = "boot.vfat"
}
partition rootfs {
... | shibajee/buildroot | board/beaglebone/genimage.cfg | INI | mit | 387 |
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_BLK_DEV_INITRD=y
CONFIG_EXPERT=y
CONFIG_SLAB=y
CONFIG_PROFILING=y
CONFIG_KPROBES=y
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UN... | shibajee/buildroot | board/beaglebone/linux-3.12.config | INI | mit | 6,195 |
From 29885f2f3d700341d322274db6ad085e601c0994 Mon Sep 17 00:00:00 2001
From: Pantelis Antoniou <panto@antoniou-consulting.com>
Date: Fri, 4 Jan 2013 00:32:33 +0200
Subject: [PATCH 3/3] arm: Export cache flush management symbols when
!MULTI_CACHE
When compiling a kernel without CONFIG_MULTI_CACHE enabled the
dma acces... | shibajee/buildroot | board/beaglebone/patches/linux/linux-0001-arm-Export-cache-flush-management-symbols-when-MULTI.patch | patch | mit | 1,006 |
#!/bin/sh
# post-image.sh for BeagleBone
# 2014, Marcin Jabrzyk <marcin.jabrzyk@gmail.com>
BOARD_DIR="$(dirname $0)"
# copy the uEnv.txt to the output/images directory
cp board/beaglebone/uEnv.txt $BINARIES_DIR/uEnv.txt
GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg"
GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
rm -rf "${GENI... | shibajee/buildroot | board/beaglebone/post-image.sh | Shell | mit | 514 |
BeagleBone
Intro
=====
To be able to use BeagleBone board with the images generated by
Buildroot, you have to prepare the SDCard.
How to build it
===============
$ make beaglebone_defconfig
Then you can edit the build options using
$ make menuconfig
Compile all and build rootfs image:
$ make
Result of the... | shibajee/buildroot | board/beaglebone/readme.txt | Text | mit | 887 |
bootpart=0:1
bootdir=
uenvcmd=run loadimage;run loadramdisk;run findfdt;run loadfdt;run ramboot
| shibajee/buildroot | board/beaglebone/uEnv.txt | Text | mit | 96 |
setenv bootargs ''
if itest.s x6SX == "x${cpu}" || itest.s x7D == "x${cpu}"; then
a_script=0x80800000
a_zImage=0x80800000
a_fdt=0x83000000
m4=''
if itest.s "x1" == "x$m4enabled" ; then
run m4boot;
m4='-m4';
fi
else
a_script=0x10800000
a_zImage=0x10800000
a_fdt=0x13000000
fi
setenv initrd_high 0xffffffff
... | shibajee/buildroot | board/boundarydevices/common/6x_bootscript.txt | Text | mit | 2,984 |
if itest.s a$uboot_defconfig == a; then
echo "Please set uboot_defconfig to the appropriate value"
exit
fi
offset=0x400
a_uImage1=0x12000000
a_uImage2=0x12400000
if itest.s x6SX == "x${cpu}" || itest.s x7D == "x${cpu}"; then
a_uImage1=0x82000000
a_uImage2=0x82400000
fi
setenv stdout serial,vga
echo... | shibajee/buildroot | board/boundarydevices/common/6x_upgrade.txt | Text | mit | 1,516 |
image sdcard.img {
hdimage {
}
partition u-boot {
in-partition-table = "no"
image = "u-boot.imx"
offset = 1024
}
partition rootfs {
partition-type = 0x83
image = "rootfs.ext4"
size = 512M
}
}
| shibajee/buildroot | board/boundarydevices/common/genimage.cfg | INI | mit | 212 |
#!/bin/sh
# post-build fixups
# for further details, see
#
# http://boundarydevices.com/u-boot-on-i-mx6/
#
BOARD_DIR="$(dirname $0)"
# bd u-boot looks for bootscript here
$HOST_DIR/usr/bin/mkimage -A arm -O linux -T script -C none -a 0 -e 0 \
-n "boot script" -d $BOARD_DIR/6x_bootscript.txt $TARGET_DIR/6x_bootscript... | shibajee/buildroot | board/boundarydevices/common/post-build.sh | Shell | mit | 638 |
#!/bin/sh
BOARD_DIR="$(dirname $0)"
GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg"
GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
rm -rf "${GENIMAGE_TMP}"
genimage \
--rootpath "${TARGET_DIR}" \
--tmppath "${GENIMAGE_TMP}" \
--inputpath "${BINARIES_DIR}" \
--outputpath "${BINARIES_DIR}" \
... | shibajee/buildroot | board/boundarydevices/common/post-image.sh | Shell | mit | 356 |
Buildroot for Boundary Devices platforms:
https://boundarydevices.com/product-category/popular-sbc-and-som-modules/
Here is the list of targeted platforms per defconfig:
- nitrogen6x_defconfig
- BD-SL-i.MX6 (SABRE-Lite)
- Nitrogen6X
- Nitrogen6_Lite
- Nitrogen6_MAX
- Nitrogen6_VM
- Nitrogen6_SOM
- Nitr... | shibajee/buildroot | board/boundarydevices/common/readme.txt | Text | mit | 631 |
CONFIG_EXPERIMENTAL=y
# CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91SAM9... | shibajee/buildroot | board/calao/qil-a9260/linux-3.4.7.config | INI | mit | 2,521 |
From a3e08beea8bf5e96e1237eef4a82f4a2fdd5286b Mon Sep 17 00:00:00 2001
From: Gregory Hermant <gregory.hermant@calao-systems.com>
Date: Thu, 19 Jul 2012 14:19:59 +0200
Subject: [PATCH] Add support for the Calao-systems QIL-A9260
Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com>
---
board/qil_a9260/na... | shibajee/buildroot | board/calao/qil-a9260/patches/at91bootstrap/0001-qil-a9260.patch | patch | mit | 22,051 |
From d076aa6182dc6df6bb311e60bbddb03573b9483b Mon Sep 17 00:00:00 2001
From: Gregory Hermant <gregory.hermant@calao-systems.com>
Date: Fri, 3 Aug 2012 11:25:49 +0200
Subject: [PATCH] Enable pull-up on Rx serial ports for the CALAO MB-QIL-A9260
Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com>
---
ar... | shibajee/buildroot | board/calao/qil-a9260/patches/barebox/0001-qil-a9260.patch | patch | mit | 1,236 |
From fe6432a9728b62bce3db73c5a4efe026018fd495 Mon Sep 17 00:00:00 2001
From: Gregory Hermant <gregory.hermant@calao-systems.com>
Date: Fri, 3 Aug 2012 16:45:37 +0200
Subject: [PATCH] QIL-A9260: rtc modalias m41t48 renamed to rtc-m41t48
Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com>
---
arch/arm/m... | shibajee/buildroot | board/calao/qil-a9260/patches/linux/0001-qil-a9260.patch | patch | mit | 935 |
From 53bd82b122f4530a98cba45795832820bb1d0b45 Mon Sep 17 00:00:00 2001
From: Gregory Hermant <gregory.hermant@calao-systems.com>
Date: Mon, 13 Aug 2012 11:26:10 +0200
Subject: [PATCH] Add support for the Calao-systems TNY-A9G20-LPW
Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com>
---
board/tny_a9g2... | shibajee/buildroot | board/calao/tny-a9g20-lpw/at91bootstrap-1.16-tny-a9g20-lpw.patch | patch | mit | 20,832 |
# CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_KALLSYMS_ALL=y
CONFIG_EMBEDDED=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_I... | shibajee/buildroot | board/calao/tny-a9g20-lpw/linux-3.9.config | INI | mit | 4,758 |
From 43e8c90f13806405bde8eaaf3a956d0ddc806f64 Mon Sep 17 00:00:00 2001
From: Gregory Hermant <gregory.hermant@calao-systems.com>
Date: Tue, 2 Oct 2012 09:19:15 +0200
Subject: [PATCH] Add support for the USB-A9260
Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com>
---
board/usb_a9260/nandflash/Makefil... | shibajee/buildroot | board/calao/usb-a9260/at91bootstrap-1.16-usb-a9260.patch | patch | mit | 22,031 |
CONFIG_EXPERIMENTAL=y
# CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91SAM9... | shibajee/buildroot | board/calao/usb-a9260/linux-3.7.4.config | INI | mit | 2,213 |
From 74796655212d321f50ab89e8c5570245901f4cba Mon Sep 17 00:00:00 2001
From: Gregory Hermant <gregory.hermant@calao-systems.com>
Date: Thu, 5 Jul 2012 18:44:07 +0200
Subject: [PATCH] Add support for the Calao-systems USB-A9263
Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com>
---
board/usb_a9263/dat... | shibajee/buildroot | board/calao/usb-a9263/at91bootstrap-1.16-usb-a9263.patch | patch | mit | 32,071 |
CONFIG_EXPERIMENTAL=y
# CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91SAM9... | shibajee/buildroot | board/calao/usb-a9263/linux-3.4.4.config | INI | mit | 2,341 |
CONFIG_EXPERIMENTAL=y
# CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91SAM9... | shibajee/buildroot | board/calao/usb-a9g20-lpw/linux-3.4.4.config | INI | mit | 2,384 |
From 8d84757d5170969e8bdfebc7951f43c5aa2b05fd Mon Sep 17 00:00:00 2001
From: Gregory Hermant <gregory.hermant@calao-systems.com>
Date: Fri, 6 Jul 2012 16:32:47 +0200
Subject: [PATCH] Add support for the Calao-systems USB-A9G20-LPW
Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com>
---
board/usb_a9g20... | shibajee/buildroot | board/calao/usb-a9g20-lpw/patches/at91bootstrap/0001-usb-a9g20-lpw.patch | patch | mit | 22,536 |
diff --git a/arch/arm/configs/usb_a9g20_defconfig b/arch/arm/configs/usb_a9g20_defconfig
index 30bf380..7716e0e 100644
--- a/arch/arm/configs/usb_a9g20_defconfig
+++ b/arch/arm/configs/usb_a9g20_defconfig
@@ -15,6 +15,7 @@ CONFIG_HUSH_FANCY_PROMPT=y
CONFIG_CMDLINE_EDITING=y
CONFIG_AUTO_COMPLETE=y
CONFIG_MENU=y
+# CO... | shibajee/buildroot | board/calao/usb-a9g20-lpw/patches/barebox/0001-usb-a9g20-lpw.patch | patch | mit | 446 |
console=tty1 clk_ignore_unused root=/dev/mmcblk1p2 rootfstype=ext4 ro
| shibajee/buildroot | board/chromebook/snow/kernel.args | args | mit | 70 |
/dts-v1/;
/ {
description = "Buildroot kernel for Chromebook Snow";
images {
kernel@1 {
description = "kernel";
data = /incbin/("zImage");
type = "kernel_noload";
arch = "arm";
os = "linux";
compression = "none";
load =... | shibajee/buildroot | board/chromebook/snow/kernel.its | its | mit | 866 |
Some versions of u-boot for this Chromebook check for tpm node
in the device tree and fail badly (reboot) if it is not found.
While not exactly correct, it is much easier to patch the mainline
device tree to match u-boot expectations than to fix u-boot on
this device.
See https://code.google.com/p/chromium/issues/det... | shibajee/buildroot | board/chromebook/snow/linux-4.6-dts-tpm.patch | patch | mit | 728 |
CONFIG_MWIFIEX=m
CONFIG_MWIFIEX_SDIO=m
| shibajee/buildroot | board/chromebook/snow/linux-4.6.fragment | fragment | mit | 39 |
#!/bin/sh
# This scripts makes a minimal bootable SD card image for the Chromebook.
# The resulting file is called bootsd.img. It should be written directly
# to the card:
#
# SD=/dev/mmcblk1 # check your device name!
# dd if=output/images/bootsd.img of=$SD
#
# The partitions are created just large enough to hold the... | shibajee/buildroot | board/chromebook/snow/mksd.sh | Shell | mit | 2,506 |
Samsung XE303C12 aka Chromebook Snow
====================================
This file describes booting the Chromebook from an SD card containing
Buildroot kernel and rootfs, using the original bootloader. This is
the least invasive way to get Buildroot onto the devices and a good
starting point.
The bootloader will on... | shibajee/buildroot | board/chromebook/snow/readme.txt | Text | mit | 5,144 |
#!/bin/sh
# This script creates u-boot FIT image containing the kernel and the DT,
# then signs it using futility from vboot-utils.
# The resulting file is called uImage.kpart.
BOARD_DIR=$(dirname $0)
mkimage=$HOST_DIR/usr/bin/mkimage
futility=$HOST_DIR/usr/bin/futility
devkeys=$HOST_DIR/usr/share/vboot/devkeys
run(... | shibajee/buildroot | board/chromebook/snow/sign.sh | Shell | mit | 1,440 |
*********************
* MIPS Creator CI20 *
*********************
The 'ci20_defconfig' will create a root filesystem and a kernel image
under the 'output/images/' directory. This document will try to explain how
to use them in order to run Buildroot in the MIPS Creator CI20 board.
Assuming you are at the U-Boot promp... | shibajee/buildroot | board/ci20/readme.txt | Text | mit | 1,396 |
This is the minimal buildroot support for the Congatec QMX6 Qseven CoM
conga-QMX6 is based on the freescale iMX6 SoC. For more information please
have a look at http://www.congatec.com/products/qseven/conga-qmx6.html
The configuration is based on the currently latest kernel release from
Congatec's git repository whic... | shibajee/buildroot | board/congatec/qmx6/readme.txt | Text | mit | 1,263 |
setenv bootargs console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait panic=10 ${extra}
fatload mmc 0 0x43000000 script.bin
fatload mmc 0 0x48000000 uImage
bootm 0x48000000
| shibajee/buildroot | board/cubietech/cubieboard/boot.cmd | Batchfile | mit | 169 |
CONFIG_EXPERIMENTAL=y
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_AUDIT=y
CONFIG_IRQ_DOMAIN_DEBUG=y
CONFIG_RCU_FAST_NO_HZ=y
CONFIG_IKCONFIG=y
CONFIG_IKCONF... | shibajee/buildroot | board/cubietech/cubieboard/linux-cubieboard2.config | INI | mit | 18,998 |
#! /bin/sh
# mkCubieCard.sh v0.1:
# 2013, Carlo Caione <carlo.caione@gmail.com>
# heavely based on :
# mkA10card.sh v0.1
# 2012, Jason Plum <jplum@archlinuxarm.org>
# loosely based on :
# mkcard.sh v0.5
# (c) Copyright 2009 Graeme Gregory <dp@xora.org.uk>
# Licensed under terms of GPLv2
#
# Parts of the procudure base ... | shibajee/buildroot | board/cubietech/cubieboard/mkcubiecard.sh | Shell | mit | 2,293 |
#!/bin/sh
# post-build.sh for CubieBoard
# 2013, Carlo Caione <carlo.caione@gmail.com>
BOARD_DIR="$(dirname $0)"
MKIMAGE=$HOST_DIR/usr/bin/mkimage
BOOT_CMD=$BOARD_DIR/boot.cmd
BOOT_CMD_H=$BINARIES_DIR/boot.scr
# U-Boot script
if [ -e $MKIMAGE -a -e $BOOT_CMD ];
then
$MKIMAGE -C none -A arm -T script -d $BOOT_CMD $BO... | shibajee/buildroot | board/cubietech/cubieboard/post-build.sh | Shell | mit | 332 |
cubieboard and cubieboard2
-----
Intro
-----
To be able to use your cubieboard board with the images generated by
Buildroot you have to correctly setup the SD card.
For more information, please see http://linux-sunxi.org/FirstSteps
---------------
How to build it
---------------
You need to use the cubieboard_defc... | shibajee/buildroot | board/cubietech/cubieboard/readme.txt | Text | mit | 1,364 |
setenv fdt_high ffffffff
setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
fatload mmc 0 $kernel_addr_r zImage
fatload mmc 0 $fdt_addr_r sun7i-a20-cubieboard2.dtb
bootz $kernel_addr_r - $fdt_addr_r
| shibajee/buildroot | board/cubietech/cubieboard2/boot.cmd | Batchfile | mit | 226 |
# Minimal SD card image for the Cubieboard2
# Based in the Orange Pi genimage.cfg
image boot.vfat {
vfat {
files = {
"zImage",
"sun7i-a20-cubieboard2.dtb",
"boot.scr"
}
}
size = 10M
}
image sdcard.img {
hdimage {
}
partition u-boot {
in-partition-table = "no"
image = "u-boot-sunxi-with-spl.bin... | shibajee/buildroot | board/cubietech/cubieboard2/genimage.cfg | INI | mit | 546 |
#!/bin/sh
# post-build.sh for Cubieboard2
# 2013, Carlo Caione <carlo.caione@gmail.com>
BOARD_DIR="$(dirname $0)"
MKIMAGE=$HOST_DIR/usr/bin/mkimage
BOOT_CMD=$BOARD_DIR/boot.cmd
BOOT_CMD_H=$BINARIES_DIR/boot.scr
# U-Boot script
$MKIMAGE -C none -A arm -T script -d $BOOT_CMD $BOOT_CMD_H
| shibajee/buildroot | board/cubietech/cubieboard2/post-build.sh | Shell | mit | 288 |
#!/bin/sh
BOARD_DIR="$(dirname $0)"
GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg"
GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
rm -rf "${GENIMAGE_TMP}"
genimage \
--rootpath "${TARGET_DIR}" \
--tmppath "${GENIMAGE_TMP}" \
--inputpath "${BINARIES_DIR}" \
--outputpath "${BINARIES_DIR}" \
... | shibajee/buildroot | board/cubietech/cubieboard2/post-image.sh | Shell | mit | 356 |
Buildroot for Embest RIoTboard
==============================
1. Compiling buildroot
----------------------
make riotboard_defconfig
make
2. Installing buildroot
-----------------------
Prepare an SD-card and plug it into your card reader. Write the bootloader to
your SD-card:
sudo dd if=output/images/u-boot.imx o... | shibajee/buildroot | board/embest/riotboard/readme.txt | Text | mit | 1,301 |
default buildroot
label buildroot
kernel /boot/uImage
devicetree /boot/imx6dl-riotboard.dtb
append console=ttymxc1,115200 root=/dev/mmcblk0p1 rw
| shibajee/buildroot | board/embest/riotboard/rootfs_overlay/boot/extlinux/extlinux.conf | INI | mit | 146 |
default firefly-rk3288
label firefly-rk3288
kernel /boot/uImage
devicetree /boot/rk3288-firefly.dtb
append console=ttyS2,115200n8 root=/dev/mmcblk0p1 rootwait
| shibajee/buildroot | board/firefly/firefly-rk3288/extlinux.conf | INI | mit | 160 |
BOARD_DIR="$(dirname $0)"
install -m 0644 -D $BOARD_DIR/extlinux.conf $TARGET_DIR/boot/extlinux/extlinux.conf
| shibajee/buildroot | board/firefly/firefly-rk3288/post-build.sh | Shell | mit | 111 |
#!/bin/sh
MKIMAGE=$HOST_DIR/usr/bin/mkimage
BOARD_DIR="$(dirname $0)"
GENIMAGE_CFG="${BOARD_DIR}/sd-image.cfg"
GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
$MKIMAGE -n rk3288 -T rksd -d $BINARIES_DIR/u-boot-spl-dtb.bin $BINARIES_DIR/u-boot-spl-dtb.img
rm -rf "${GENIMAGE_TMP}"
genimage \
--rootpath "${TARGET_DIR... | shibajee/buildroot | board/firefly/firefly-rk3288/post-image.sh | Shell | mit | 462 |
Firefly RK3288
How to build it
===============
$ make firefly_rk3288_defconfig
Then you can edit the build options using
$ make menuconfig
Compile all and build rootfs image:
$ make
Result of the build
-------------------
After building, you should get a tree like this:
output/images/
├── rk3288-fire... | shibajee/buildroot | board/firefly/firefly-rk3288/readme.txt | Text | mit | 905 |
image sdcard.img {
hdimage {
}
partition u-boot-spl-dtb {
in-partition-table = "no"
image = "u-boot-spl-dtb.img"
offset = 32K
}
partition u-boot-dtb {
in-partition-table = "no"
image = "u-boot-dtb.img"
offset = 128K
}
partition rootfs {
partition-type = 0x83
image = "roo... | shibajee/buildroot | board/firefly/firefly-rk3288/sd-image.cfg | INI | mit | 352 |
#!/bin/sh
set -u
set -e
PROGNAME=$(basename $0)
usage()
{
echo "Create an SD card that boots on an i.MX53/6 board."
echo
echo "Note: all data on the the card will be completely deleted!"
echo "Use with care!"
echo "Superuser permissions may be required to write to the device."
echo
echo "... | shibajee/buildroot | board/freescale/create-boot-sd.sh | Shell | mit | 1,844 |
# Minimal SD card image for the Freescale's i.MX25 PDK board
#
# We mimic the .sdcard Freescale's image format for i.MX25:
# * the SD card must have 1 kB free space at the beginning,
# * U-Boot is dumped as is,
# * a FAT partition at offset 8 MB is containing zImage and dtbs,
# * a single root filesystem partition is r... | shibajee/buildroot | board/freescale/imx25pdk/genimage.cfg | INI | mit | 782 |
#!/usr/bin/env bash
BOARD_DIR="$(dirname $0)"
GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg"
GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
rm -rf "${GENIMAGE_TMP}"
genimage \
--rootpath "${TARGET_DIR}" \
--tmppath "${GENIMAGE_TMP}" \
--inputpath "${BINARIES_DIR}" \
--outputpath "${BINARIES_DIR}" \
--config "${GENIMAG... | shibajee/buildroot | board/freescale/imx25pdk/post-image.sh | Shell | mit | 328 |
**************************
Freescale i.MX25 PDK board
**************************
This file documents the Buildroot support for the Freescale i.MX25 PDK board.
Build
=====
First, configure Buildroot for the i.MX25 PDK board:
make mx25pdk_defconfig
Build all components:
make
You will find in output/images/ the... | shibajee/buildroot | board/freescale/imx25pdk/readme.txt | Text | mit | 1,260 |
#!/bin/sh
set -u
set -e
PROGNAME=$(basename $0)
usage()
{
echo "Create an SD card that boots on an i.MX28 EVK board."
echo
echo "Note: all data on the the card will be completely deleted!"
echo "Use with care!"
echo "Superuser permissions may be required to write to the device."
echo
echo... | shibajee/buildroot | board/freescale/imx28evk/create-boot-sd.sh | Shell | mit | 1,986 |
**************************
Freescale i.MX28 EVK board
**************************
This file documents the Buildroot support for the Freescale i.MX28 EVK board.
Read the i.MX28 Evaluation Kit Quick Start Guide [1] for an introduction to the
board.
Build
=====
First, configure Buildroot for your i.MX28 EVK board:
m... | shibajee/buildroot | board/freescale/imx28evk/readme.txt | Text | mit | 1,534 |
**************************************
Freescale i.MX31 PDK development board
**************************************
This file documents the Buildroot support for the Freescale i.MX31 PDK in "3
stack" configuration.
The i.MX31 Product Development Kit (or PDK) is Freescale development board [1]
based on the i.MX31 app... | shibajee/buildroot | board/freescale/imx31_3stack/readme.txt | Text | mit | 2,905 |
# Minimal SD card image for the Freescale's i.MX51 EVK board
#
# We mimic the .sdcard Freescale's image format for i.MX51:
# * the microSD card must have 1 kB free space at the beginning,
# * U-Boot is dumped as is,
# * a FAT partition at offset 8 MB is containing zImage and dtbs,
# * a single root filesystem partition... | shibajee/buildroot | board/freescale/imx51evk/genimage.cfg | INI | mit | 791 |
#!/usr/bin/env bash
BOARD_DIR="$(dirname $0)"
GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg"
GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
rm -rf "${GENIMAGE_TMP}"
genimage \
--rootpath "${TARGET_DIR}" \
--tmppath "${GENIMAGE_TMP}" \
--inputpath "${BINARIES_DIR}" \
--outputpath "${BINARIES_DIR}" \
--config "${GENIMAG... | shibajee/buildroot | board/freescale/imx51evk/post-image.sh | Shell | mit | 328 |
**************************
Freescale i.MX51 EVK board
**************************
This file documents the Buildroot support for the Freescale i.MX51 EVK board.
Build
=====
First, configure Buildroot for the i.MX51 EVK board:
make mx51evk_defconfig
Build all components:
make
You will find in output/images/ the... | shibajee/buildroot | board/freescale/imx51evk/readme.txt | Text | mit | 1,270 |
# Minimal microSD card image for the Freescale's i.MX53 QSB board
#
# We mimic the .sdcard Freescale's image format for i.MX53:
# * the microSD card must have 1 kB free space at the beginning,
# * U-Boot is dumped as is,
# * a FAT partition at offset 8 MB is containing zImage and dtbs,
# * a single root filesystem part... | shibajee/buildroot | board/freescale/imx53loco/genimage.cfg | INI | mit | 816 |
#!/usr/bin/env bash
BOARD_DIR="$(dirname $0)"
GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg"
GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
rm -rf "${GENIMAGE_TMP}"
genimage \
--rootpath "${TARGET_DIR}" \
--tmppath "${GENIMAGE_TMP}" \
--inputpath "${BINARIES_DIR}" \
--outputpath "${BINARIES_DIR}" \
--config "${GENIMAG... | shibajee/buildroot | board/freescale/imx53loco/post-image.sh | Shell | mit | 328 |
From 90ecc0ad14337898b75843efc6530fc4a34f7808 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Vincent=20Stehl=C3=A9?= <vincent.stehle@freescale.com>
Date: Tue, 12 Aug 2014 10:17:31 +0200
Subject: [PATCH] mx6qsabre_common: boot Linux to /init in mfgtools mode
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Tr... | shibajee/buildroot | board/freescale/imx6sabre/patches/uboot/uboot-0001-mx6qsabre_common-boot-Linux-to-init-in-mfgtools-mode.patch | patch | mit | 1,320 |
********************************************************
Freescale i.MX6 Q, DL and SoloX SABRE development boards
********************************************************
This file documents the Buildroot support for the Freescale SABRE Board
for Smart Devices Based on the i.MX 6 and i.MX 6SoloX Series (SABRESD),
as w... | shibajee/buildroot | board/freescale/imx6sabre/readme.txt | Text | mit | 4,207 |
# Minimal microSD card image for the Freescale's i.MX6UL EVK board
#
# We mimic the .sdcard Freescale's image format for i.MX6UL:
# * the microSD card must have 1 kB free space at the beginning,
# * U-Boot is dumped as is,
# * a FAT partition at offset 8 MB is containing zImage and dtbs,
# * a single root filesystem pa... | shibajee/buildroot | board/freescale/imx6ulevk/genimage.cfg | INI | mit | 801 |
#!/usr/bin/env bash
BOARD_DIR="$(dirname $0)"
GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg"
GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
rm -rf "${GENIMAGE_TMP}"
genimage \
--rootpath "${TARGET_DIR}" \
--tmppath "${GENIMAGE_TMP}" \
--inputpath "${BINARIES_DIR}" \
--outputpath "${BINARIES_DIR}" \
--config "${GENIMAG... | shibajee/buildroot | board/freescale/imx6ulevk/post-image.sh | Shell | mit | 328 |
***************************
Freescale i.MX6UL EVK board
***************************
This file documents the Buildroot support for the Freescale i.MX6UL EVK board.
Please read the i.MX6UL Evaluation Kit Quick Start Guide [1] for an
introduction to the board.
Build
=====
First, configure Buildroot for your i.MX6UL EV... | shibajee/buildroot | board/freescale/imx6ulevk/readme.txt | Text | mit | 1,722 |
# Minimal microSD card image for the Freescale's i.MX7D SDB board
#
# We mimic the .sdcard Freescale's image format for i.MX7D:
# * the microSD card must have 1 kB free space at the beginning,
# * U-Boot is dumped as is,
# * a FAT partition at offset 8 MB is containing zImage and dtbs,
# * a single root filesystem part... | shibajee/buildroot | board/freescale/imx7dsdb/genimage.cfg | INI | mit | 792 |
#!/usr/bin/env bash
BOARD_DIR="$(dirname $0)"
GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg"
GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
rm -rf "${GENIMAGE_TMP}"
genimage \
--rootpath "${TARGET_DIR}" \
--tmppath "${GENIMAGE_TMP}" \
--inputpath "${BINARIES_DIR}" \
--outputpath "${BINARIES_DIR}" \
--config "${GENIMAG... | shibajee/buildroot | board/freescale/imx7dsdb/post-image.sh | Shell | mit | 328 |
***************************
Freescale i.MX7D SDB board
***************************
This file documents the Buildroot support for the Freescale i.MX7D SDB board.
Build
=====
First, configure Buildroot for your i.MX7D SDB board:
make freescale_imx7dsabresd_defconfig
Build all components:
make
You will find in ... | shibajee/buildroot | board/freescale/imx7dsdb/readme.txt | Text | mit | 1,286 |
CONFIG_FSL_EMB_PERFMON=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_EMBEDDED=y
CONFIG_MODULES=y
# CONFIG_PPC_CHRP is not set
# CONFIG_PPC_PMAC is not set
CONFIG_PPC_83xx=y
CONFIG_MPC831x_RDB=y
CONFIG_MCU_MPC8349EMITX=y
CONFIG_P... | shibajee/buildroot | board/freescale/mpc8315erdb/linux-4.5.config | INI | mit | 1,419 |
******************** WARNING ********************
The compiled U-Boot binary is intended for NAND flash only!
It won't work for NOR and will brick that bootloader!
Also don't go playing around with different U-boot versions or flash targets
unless you've got the necessary hardware and/or know-how to unbrick your kit.... | shibajee/buildroot | board/freescale/mpc8315erdb/readme.txt | Text | mit | 2,115 |
CONFIG_PPC_85xx=y
CONFIG_PHYS_64BIT=y
CONFIG_SYSVIPC=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_EXPERT=y
CONFIG_MODULES=y
CONFIG_P1010_RDB=y
CONFIG_HIGHMEM=y
CONFIG_SWIOTLB=y
CONFIG_FORCE_MAX_ZONEORDER=12
CONFIG_PCI=y
CONFIG_PCI_MSI=y
CONFIG_RAPIDIO=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UN... | shibajee/buildroot | board/freescale/p1010rdb/linux-4.1.config | INI | mit | 1,403 |
******************** WARNING ********************
The compiled U-Boot binary is intended for NOR flash only!
It won't work for NAND or SPI and will brick those bootloaders!
Also don't go playing around with different U-boot versions or flash targets
unless you've got the necessary hardware and/or know-how to unbrick ... | shibajee/buildroot | board/freescale/p1010rdb/readme.txt | Text | mit | 2,815 |
CONFIG_PPC_85xx=y
CONFIG_PHYS_64BIT=y
CONFIG_SMP=y
CONFIG_NR_CPUS=8
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_FHANDLE=y
CONFIG_AUDIT=y
CONFIG_IRQ_DOMAIN_DEBUG=y
CONFIG_NO_HZ_IDLE=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_CGROUPS=y
CO... | shibajee/buildroot | board/freescale/p2020ds/linux-3.12.config | INI | mit | 9,275 |
From: Nikita Yushchenko <nyushchenko@dev.rtsoft.ru>
Subject: [PATCH] usb: pci-quirks: do not access OHCI_FMINTERVAL register on ULI hw
This access causes hang on Freescale P2020DS board (that has OHCI
provided by ULI 1533 chip).
Since preserving OHCI_FMINTERVAL was originally done only for NVIDIA
hardware and only la... | shibajee/buildroot | board/freescale/p2020ds/linux-fix-c6187597-breakage.patch | patch | mit | 1,785 |
You'll need to program the files created by buildroot into the flash.
The fast way is to tftp transfer the files via one of the network interfaces.
Alternatively you can transfer the files via serial console with an Ymodem
file transfer from your terminal program by using a "loady" command
from the u-boot prompt inste... | shibajee/buildroot | board/freescale/p2020ds/readme.txt | Text | mit | 1,227 |
Build
=====
First, configure Buildroot for your WarpBoard.
make warpboard_defconfig
Build all components:
make
You will find in ./output/images/ the following files:
- imx6sl-warp.dtb
- rootfs.ext4
- rootfs.tar
- sdcard.img
- u-boot.imx
- zImage
Update uboot
============
- Put warpboard in USB down... | shibajee/buildroot | board/freescale/warpboard/README | none | mit | 1,698 |
# Minimal SD card image for the Warp board
#
# We mimic the .sdcard Freescale's image format for i.MX6SL:
# * the microSD card must have 1 kB free space at the beginning,
# * U-Boot is dumped as is,
# * a FAT partition at offset 8 MB is containing zImage and dtbs,
# * a single root filesystem partition is required (Ext... | shibajee/buildroot | board/freescale/warpboard/genimage.cfg | INI | mit | 772 |
CONFIG_CFG80211_WEXT=y
| shibajee/buildroot | board/freescale/warpboard/linux.fragment | fragment | mit | 23 |
#!/usr/bin/env bash
BOARD_DIR="$(dirname $0)"
GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg"
GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
rm -rf "${GENIMAGE_TMP}"
genimage \
--rootpath "${TARGET_DIR}" \
--tmppath "${GENIMAGE_TMP}" \
--inputpath "${BINARIES_DIR}" \
--outputpath "${BINARIES_DIR}" \
--config "${GENIMAG... | shibajee/buildroot | board/freescale/warpboard/post-image.sh | Shell | mit | 328 |
# bcm94330wlsdgb.txt
manfid=0x2d0
prodid=0x0552
vendid=0x14e4
devid=0x4360
boardtype=0x0552
boardrev=0x11
# this design has 2.4GHz SP3T switch
boardflags=0x00080200
nocrc=1
xtalfreq=37400
boardnum=22
macaddr=00:90:4c:c5:12:38
ag0=255
aa2g=1
ccode=CN
pa0b0=0x14d0
pa0b1=0xfd98
pa0b2=0xff78
rssismf2g=0xa
rssismc2g=0x3
rss... | shibajee/buildroot | board/freescale/warpboard/rootfs_overlay/lib/firmware/brcm/brcmfmac4330-sdio.txt | Text | mit | 701 |
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SYSVIPC=y
CONFIG_BLK_DEV_INITRD=y
# CONFIG_RD_GZIP is not set
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
# CONFIG_RD_XZ is not set
# CONFIG_RD_LZO is not set
# CONFIG_RD_LZ4 is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_UID16 is not set
# CONFIG_SGETMASK_SY... | shibajee/buildroot | board/gdb/bfin-bf512/linux-4.6.config | INI | mit | 2,659 |
Run the simulation with GDB for FDPIC:
./output/host/usr/bin/bfin-buildroot-linux-uclibc-run --env operating --model bf512 output/images/vmlinux
Run the simulation with GDB for FLAT:
./output/host/usr/bin/bfin-buildroot-uclinux-uclibc-run --env operating --model bf512 output/images/vmlinux
The login prompt will a... | shibajee/buildroot | board/gdb/bfin-bf512/readme.txt | Text | mit | 381 |
#!/bin/sh
# no simulated network devices at the moment
rm -f ${TARGET_DIR}/etc/init.d/S40network
rm -rf ${TARGET_DIR}/etc/network/
| shibajee/buildroot | board/gdb/post-build.sh | Shell | mit | 131 |
ODROIDC2-UBOOT-CONFIG
# HDMI mode
setenv m "1080p60hz" # Progressive 60Hz
# HDMI BPP Mode
setenv m_bpp "32"
# HDMI HotPlug Detection control
# Allows you to force HDMI thinking that the cable is connected.
# true = HDMI will believe that cable is always connected
# false = will let board/monitor negotiate the connec... | shibajee/buildroot | board/hardkernel/odroidc2/boot.ini | INI | mit | 1,916 |
image boot.vfat {
vfat {
files = {
"boot.ini",
"Image",
"meson64_odroidc2.dtb"
}
}
size = 32M
}
image sdcard.img {
hdimage {
}
partition vfat {
partition-type = 0xC
image = "boot.vfat"
offset = 1048576
}
partition rootfs {
partition-type = 0x83
image = "rootfs.ext4"
size = 512M
}
}
| shibajee/buildroot | board/hardkernel/odroidc2/genimage.cfg | INI | mit | 320 |
#!/bin/sh
BOARD_DIR="$(dirname $0)"
GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg"
GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
cp ${BOARD_DIR}/boot.ini ${BINARIES_DIR}/
rm -rf "${GENIMAGE_TMP}"
genimage \
--rootpath "${TARGET_DIR}" \
--tmppath "${GENIMAGE_TMP}" \
--inputpath "${BINARIES_D... | shibajee/buildroot | board/hardkernel/odroidc2/post-image.sh | Shell | mit | 590 |
ODROID-C2
Intro
=====
To be able to use ODROID-C2 board with the images generated by
Buildroot, you have to prepare the SDCard or eMMC.
How to build it
===============
$ make odroidc2_defconfig
Then you can edit the build options using
$ make menuconfig
Compile all and build rootfs image:
$ make
Note: you... | shibajee/buildroot | board/hardkernel/odroidc2/readme.txt | Text | mit | 1,173 |
# Create an image of the efi partition
image efi-part.vfat {
vfat {
file startup.nsh {
image = "efi-part/startup.nsh"
}
file EFI {
image = "efi-part/EFI"
}
}
size=512K
}
# Create the sdcard image, pulling in
# * the image created by buildroot
# * the efi-partition created above
image sdcard.img {
h... | shibajee/buildroot | board/intel/galileo/genimage.cfg | INI | mit | 491 |
set default="0"
set timeout="0"
menuentry "Buildroot" {
# Grub2 supports ext4, load the kernel from the Linux rootfs partition
# Set root tells grub to search the 2nd partition for the bzImage
set root=(hd0,msdos2)
# Set Linux to boot from the 2nd partition, SD/MMC support is baked into the kernel
linux /boot/bz... | shibajee/buildroot | board/intel/galileo/grub.cfg | INI | mit | 455 |
CONFIG_EXPERIMENTAL=y
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_KERNEL_LZMA=y
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=18
CONFIG_CGROUPS=y
CONFIG_CGROUP_FREEZER=y
CON... | shibajee/buildroot | board/intel/galileo/linux-3.8.config | INI | mit | 7,769 |
#!/bin/sh -e
cp board/intel/galileo/grub.cfg ${BINARIES_DIR}/efi-part/EFI/BOOT/grub.cfg
| shibajee/buildroot | board/intel/galileo/post-build.sh | Shell | mit | 88 |
#!/bin/sh -e
GENIMAGE_CFG="board/intel/galileo/genimage.cfg"
GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
rm -rf "${GENIMAGE_TMP}"
genimage \
--rootpath "${TARGET_DIR}" \
--tmppath "${GENIMAGE_TMP}" \
--inputpath "${BINARIES_DIR}" \
--outputpath "${BINARIES_DIR}" \
--config "${GENIMAGE_CFG}"
| shibajee/buildroot | board/intel/galileo/post-image.sh | Shell | mit | 312 |