text
stringlengths 37
12.5k
| meta
dict |
|---|---|
---
abstract: 'The purpose of this article is to study the problem of finding sharp lower bounds for the norm of the product of polynomials in the ultraproducts of Banach spaces $(X_i)_{\mathfrak U}$. We show that, under certain hypotheses, there is a strong relation between this problem and the same problem for the spaces $X_i$.'
address: 'IMAS-CONICET'
author:
- Jorge Tomás Rodríguez
title: On the norm of products of polynomials on ultraproducts of Banach spaces
---
Introduction
============
In this article we study the factor problem in the context of ultraproducts of Banach spaces. This problem can be stated as follows: for a Banach space $X$ over a field ${\mathbb K}$ (with ${\mathbb K}={\mathbb R}$ or ${\mathbb K}={\mathbb C}$) and natural numbers $k_1,\cdots, k_n$ find the optimal constant $M$ such that, given any set of continuous scalar polynomials $P_1,\cdots,P_n:X\rightarrow {\mathbb K}$, of degrees $k_1,\cdots,k_n$; the inequality $$\label{problema}
M \Vert P_1 \cdots P_n\Vert \ge \, \Vert P_1 \Vert \cdots \Vert P_n \Vert$$ holds, where $\Vert P \Vert = \sup_{\Vert x \Vert_X=1} \vert P(x)\vert$. We also study a variant of the problem in which we require the polynomials to be homogeneous.
Recall that a function $P:X\rightarrow {\mathbb K}$ is a continuous $k-$homogeneous polynomial if there is a continuous $k-$linear function $T:X^k\rightarrow {\mathbb K}$ for which $P(x)=T(x,\cdots,x)$. A function $Q:X\rightarrow {\mathbb K}$ is a continuous polynomial of degree $k$ if $Q=\sum_{l=0}^k Q_l$ with $Q_0$ a constant, $Q_l$ ($1\leq l \leq k$) an $l-$homogeneous polynomial and $Q_k \neq 0$ .
The factor problem has been studied by several authors. In [@BST], C. Benítez, Y. Sarantopoulos and A. Tonge proved that, for continuous polynomials, inequality (\[problema\]) holds with constant $$M=\frac{(k_1+\cdots + k_n)^{(k_1+\cdots +k_n)}}{k_1^{k_1} \cdots k_n^{k_n}}$$ for any complex Banach space. The authors also showed that this is the best universal constant, since there are polynomials on $\ell_1$ for which equality prevails. For complex Hilbert spaces and homogeneous polynomials, D. Pinasco proved in [@P] that the optimal constant is $$\nonumber
M=\sqrt{\frac{(k_1+\cdots + k_n)^{(k_1+\cdots +k_n)}}{k_1^{k_1} \cdots k_n^{k_n}}}.$$ This is a generalization of the result for linear functions obtained by Arias-de-Reyna in [@A]. In [@CPR], also for homogeneous polynomials, D. Carando, D. Pinasco and the author proved that for any complex $L_p(\mu)$ space, with $dim(L_p(\mu))\geq n$ and $1<p<2$, the optimal constant is $$\nonumber
M=\sqrt[p]{\frac{(k_1+\cdots + k_n)^{(k_1+\cdots +k_n)}}{k_1^{k_1} \cdots k_n^{k_n}}}.$$
This article is partially motivated by the work of M. Lindström and R. A. Ryan in [@LR]. In that article they studied, among other things, a problem similar to (\[problema\]): finding the so called polarization constant of a Banach space. They found a relation between the polarization constant of the ultraproduct $(X_i)_{\mathfrak U}$ and the polarization constant of each of the spaces $X_i$. Our objective is to do an analogous analysis for our problem (\[problema\]). That is, to find a relation between the factor problem for the space $(X_i)_{\mathfrak U}$ and the factor problem for the spaces $X_i$.
In Section 2 we give some basic definitions and results of ultraproducts needed for our discussion. In Section 3 we state and prove the main result of this paper, involving ultraproducts, and a similar result on biduals.
Ultraproducts
=============
We begin with some definitions, notations and basic results on filters, ultrafilters and ultraproducts. Most of the content presented in this section, as well as an exhaustive exposition on ultraproducts, can be found in Heinrich’s article [@H].
A filter ${\mathfrak U}$ on a family $I$ is a collection of non empty subsets of $I$ closed by finite intersections and inclusions. An ultrafilter is maximal filter.
In order to define the ultraproduct of Banach spaces, we are going to need some topological results first.
Let ${\mathfrak U}$ be an ultrafilter on $I$ and $X$ a topological space. We say that the limit of $(x_i)_{i\in I} \subseteq X$ respect of ${\mathfrak U}$ is $x$ if for every open neighborhood $U$ of $x$ the set $\{i\in I: x_i \in U\}$ is an element of ${\mathfrak U}$. We denote $$\displaystyle\lim_{i,{\mathfrak U}} x_i = x.$$
The following is Proposition 1.5 from [@H].
\[buenadef\] Let ${\mathfrak U}$ be an ultrafilter on $I$, $X$ a compact Hausdorff space and $(x_i)_{i\in I} \subseteq X$. Then, the limit of $(x_i)_{i\in I}$ respect of ${\mathfrak U}$ exists and is unique.
Later on, we are going to need the next basic Lemma about limits of ultraproducts, whose proof is an easy exercise of basic topology and ultrafilters.
\[lemlimit\] Let ${\mathfrak U}$ be an ultrafilter on $I$ and $\{x_i\}_{i\in I}$ a family of real numbers. Assume that the limit of $(x_i)_{i\in I} \subseteq {\mathbb R}$ respect of ${\mathfrak U}$ exists and let $r$ be a real number such that there is a subset $U$ of $\{i: r<x_i\}$ with $U\in {\mathfrak U}$. Then $$r \leq \displaystyle\lim_{i,{\mathfrak U}} x_i.$$
We are now able to define the ultraproduct of Banach spaces. Given an ultrafilter ${\mathfrak U}$ on $I$ and a family of Banach spaces $(X_i)_{i\in I}$, take the Banach space $\ell_\infty(I,X_i)$ of norm bounded families $(x_i)_{i\in I}$ with $x_i \in X_i$ and norm $$\Vert (x_i)_{i\in I} \Vert = \sup_{i\in I} \Vert x_i \Vert.$$ The ultraproduct $(X_i)_{\mathfrak U}$ is defined as the quotient space $\ell_\infty(I,X_i)/ \sim $ where $$(x_i)_{i\in I}\sim (y_i)_{i\in I} \Leftrightarrow \displaystyle\lim_{i,{\mathfrak U}} \Vert x_i - y_i \Vert = 0.$$
Observe that Proposition \[buenadef\] assures us that this limit exists for every pair $(x_i)_{i\in I}, (y_i)_{i\in I}\in \ell_\infty(I,X_i)$. We denote the class of $(x_i)_{i\in I}$ in $(X_i)_{\mathfrak U}$ by $(x_i)_{\mathfrak U}$.
The following result is the polynomial version of Definition 2.2 from [@H] (see also Proposition 2.3 from [@LR]). The reasoning behind is almost the same.
\[pollim\] Given two ultraproducts $(X_i)_{\mathfrak U}$, $(Y_i)_{\mathfrak U}$ and a family of continuous homogeneous polynomials $\{P_i\}_{i\in I}$ of degree $k$ with $$\displaystyle\sup_{i\in I} \Vert P_i \Vert < \infty,$$ the map $P:(X_i)_{\mathfrak U}\longrightarrow (Y_i)_{\mathfrak U}$ defined by $P((x_i)_{\mathfrak U})=(P_i(x_i))_{\mathfrak U}$ is a continuous homogeneous polynomial of degree $k$. Moreover $\Vert P \Vert = \displaystyle\lim_{i,{\mathfrak U}} \Vert P_i \Vert$.
If ${\mathbb K}={\mathbb C}$, the hypothesis of homogeneity can be omitted, but in this case the degree of $P$ can be lower than $k$.
Let us start with the homogeneous case. Write $P_i(x)=T_i(x,\cdots,x)$ with $T_i$ a $k-$linear continuous function. Define $T:(X_i)_{\mathfrak U}^k \longrightarrow (Y_i)_{\mathfrak U}$ by $$T((x^1_i)_{\mathfrak U},\cdots,(x^k_i)_{\mathfrak U
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: 'Dark Matter detectors with directional sensitivity have the potential of yielding an unambiguous positive observation of WIMPs as well as discriminating between galactic Dark Matter halo models. In this article, we introduce the motivation for directional detectors, discuss the experimental techniques that make directional detection possible, and review the status of the experimental effort in this field.'
address:
- 'Massachusetts Institute of Technology, 77 Massachusetts Avenue, Cambridge, MA 02139, USA'
- 'Temple University, 1900 N. 13-th Street, Philadelphia, PA 19122, USA'
author:
- G Sciolla
- C J Martoff
bibliography:
- 'all\_DM.bib'
title: Gaseous Dark Matter Detectors
---
Introduction
============
Astronomical and cosmological observations have recently shown that Dark Matter (DM) is responsible for 23% of the energy budget of the Universe and 83% of its mass [@Hinshaw2008]. The most promising candidate for Dark Matter is the so-called Weakly Interacting Massive Particle (WIMP). The existence of WIMPs is independently suggested by considerations of Big Bang cosmology and theoretical supersymmetric particle phenomenology [@LeeWeinberg; @Weinberg82; @Jungman1996].
Over the years, many direct detection experiments have been performed to search for nuclear recoils due to elastic scattering of WIMPs off the nuclei in the active volume of the detector. The main challenge for these experiments is to suppress the backgrounds that mimic WIMP-induced nuclear recoils. Today’s leading experiments have achieved excellent rejection of electromagnetic backgrounds, i.e., photons, electrons and alpha particles, that have a distinct signature in the detector. However, there are sources of background for which the detector response is nearly identical to that of a WIMP-induced recoil, such as the coherent scattering of neutrinos from the sun [@Monroe2007], or the elastic scattering of neutrons produced either by natural radioactivity or by high-energy cosmic rays.
While neutron and neutrino interactions do not limit today’s experiments, they are expected to become dangerous sources of background when the scale of DM experiments grows to fiducial masses of several tons. In traditional counting experiments, the presence of such backgrounds could undermine the unambiguous identification of a Dark Matter signal because neutrinos are impossible to suppress by shielding and underground neutron backgrounds are notoriously difficult to predict [@Mei2006].
An unambiguous positive identification of a Dark Matter signal even in presence of unknown amounts of irreducible backgrounds could still be achieved if one could correlate the observation of a nuclear recoil in the detector with some unique astrophysical signature which no background could mimic. This is the idea that motivates directional detection of Dark Matter.
The Dark Matter Wind
---------------------
The observed rotation curve of our Galaxy suggests that at the galactic radius of the sun the galactic potential has a significant contribution from Dark Matter. The Dark Matter distribution in our Galaxy, however, is poorly constrained. A commonly used DM distribution, the standard dark halo model [@SmithLewin1990], assumes a non-rotating, isothermal sphere extending out to 50 kpc from the galactic center. The DM velocity is described by a Maxwell-Boltzmann distribution with dispersion $\sigma_v=155$ km/s. Concentric with the DM halo is the galactic disk of luminous ordinary matter, rotating with respect to the halo, with an average orbital velocity of about 220 km/s at the radius of the solar system. Therefore in this model, an observer on Earth would see a wind of DM particles with average velocity of 220 km/s.
The Dark Matter wind creates two observable effects. The first was pointed out in 1986 by Drukier, Freese, and Spergel [@Drukier1986] who predicted that the Earth’s motion relative to the galactic halo leads to an annual modulation of the rates of interactions observed above a certain threshold in direct detection experiments. In its annual rotation around the sun, the Earth’s orbital velocity has a component that is anti-parallel to the DM wind during the summer, and parallel to it during the winter. As a result, the apparent velocity of the DM wind will increase (decrease) by about 10% in summer (winter), leading to a corresponding increase (decrease) of the observed rates in DM detectors. Unfortunately, this effect is difficult to detect because the seasonal modulation is expected to be small (a few %) and very hard to disentangle from other systematic effects, such as the seasonal dependence of background rates. These experimental difficulties cast a shadow on the recent claimed observation of the yearly asymmetry by the DAMA/LIBRA collaboration [@Bernabei2008].
A larger modulation of the WIMP signal was pointed out by Spergel [@Spergel] in 1988. The Earth spins around its axis with a period of 24 sidereal hours. Because its rotation axis is oriented at 48$^\circ$ with respect to the direction of the DM wind, an observer on Earth sees the average direction of the WIMPs change by 96$^\circ$ every 12 sidereal hours. This modulation in arrival direction should be resolvable by a Dark Matter directional detector, e.g., a detector able to determine the direction of the DM particles. Most importantly, no known background is correlated with the direction of the DM wind. Therefore, a directional detector could hold the key to the unambiguous observation of Dark Matter.
In addition to background rejection, the determination of the direction of the arrival of Dark Matter particles can discriminate [@Copi1999; @Vergados2003; @Morgan2004; @Freese2005; @Alenazi2008] between various DM halo distributions including the standard dark halo model, models with streams of WIMPs, the Sikivie late-infall halo model [@Sikivie1999; @Tkachev1997; @Sikivie1995], and other anisotropic models. The discrimination power is further enhanced if a determination of the sense as well as the direction of WIMPs is possible [@Green2007]. This capability makes directional detectors unique observatories for underground WIMP astronomy.
Directional Dark Matter Detection
-----------------------------------
When Dark Matter particles interact with regular matter, they scatter elastically off the atoms and generate nuclear recoils with typical energies $E_R$ of a few tens of keV, as explained in more detail in section \[NuclearRecoils\]. The direction of the recoiling nucleus encodes the direction of the incoming DM particle. To observe the daily modulation in the direction of the DM wind, an angular resolution of 20–30 degrees in the reconstruction of the recoil nucleus is sufficient, because the intrinsic spread in direction of the DM wind is $\approx$ 45 degrees. Assuming that sub-millimeter tracking resolution can be achieved, the length of a recoil track has to be of at least 1–2 mm, which can be obtained by using a very dilute gas as a target material.
An ideal directional detector should provide a 3-D vector reconstruction of the recoil track with a spatial resolution of a few hundred microns in each coordinate, and combine a very low energy threshold with an excellent background rejection capability. Such a detector would be able to reject isotropy of the recoil direction, and hence identify the signature of a WIMP wind, with just a handful of events [@Morgan2004].
More recently, Green and Morgan [@Green2007] studied how the number of events necessary to detect the WIMP wind depends on the detector performance in terms of energy threshold, background rates, 2-D versus 3-D reconstruction of the nuclear recoil, and ability to determine the sense of the direction by discriminating between the “head” and “tail” of the recoil track. The default configuration used for this study assumes a CS$_2$ gaseous TPC running at 0.05 bar using 200 $\mu$m pixel readout providing 3-D reconstruction of the nuclear recoil and “head-tail” discrimination. The energy threshold is assumed to be 20 keV, with perfect background rejection. In such a configuration, 7 events would be sufficient to establish observation of the WIMP wind at 90% C.L.. In presence of background with S/N=1, the number of events necessary to reject isotropy would increase by a factor 2. If only 2D reconstruction is available, the required number of events doubles compared to the default configuration. “Head-tail” discrimination turns out to be the most important capability: if the sense cannot be measured, the number of events necessary to observe the effects of the WIMP wind increases by one order of magnitude.
Nuclear Recoils in Gaseous Detectors {#NuclearRecoils}
====================================
To optimize the design of gaseous detectors for directional detection of Dark Matter one must be able to calculate the recoil atom energy spectrum expected for a range of WIMP parameters and halo models. The detector response in the relevant energy range must also be predictable. The response will be governed first and foremost by the track length and characteristics (multiple scattering) as a function of recoil atom type and energy. Since gas detectors require ionization for detection, design also requires knowledge of the ionization yield in gas and its distribution along the track as a function of recoil atom type and energy, and possibly electric field.
The large momentum transfer necessary to produce a detectable recoil in gas implies that the scattering atom can be treated as a free particle, making calculations of the recoil spectrum essentially independent of whether the target is a solid, liquid, or gas.
An estimate of the maximum Dark Matter recoil energy for simple halo models is given by the kinematically allowed energy transfer from an infinitely heavy halo WIMP with velocity equal to the galactic escape speed. This speed is locally about 500-600 km/sec [@rave]; W
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: 'The aim of this paper is to establish a global asymptotic equivalence between the experiments generated by the discrete (high frequency) or continuous observation of a path of a Lévy process and a Gaussian white noise experiment observed up to a time $T$, with $T$ tending to $\infty$. These approximations are given in the sense of the Le Cam distance, under some smoothness conditions on the unknown Lévy density. All the asymptotic equivalences are established by constructing explicit Markov kernels that can be used to reproduce one experiment from the other.'
address:
- '*Laboratoire LJK, Université Joseph Fourier UMR 5224 51, Rue des Mathématiques, Saint Martin d’Hères BP 53 38041 Grenoble Cedex 09*'
- 'Corresponding Author, Ester.Mariucci@imag.fr'
author:
- Ester Mariucci
bibliography:
- 'refs.bib'
title: Asymptotic equivalence for pure jump Lévy processes with unknown Lévy density and Gaussian white noise
---
Nonparametric experiments,Le Cam distance,asymptotic equivalence,Lévy processes. 62B15,(62G20,60G51).
Introduction
============
Lévy processes are a fundamental tool in modelling situations, like the dynamics of asset prices and weather measurements, where sudden changes in values may happen. For that reason they are widely employed, among many other fields, in mathematical finance. To name a simple example, the price of a commodity at time $t$ is commonly given as an exponential function of a Lévy process. In general, exponential Lévy models are proposed for their ability to take into account several empirical features observed in the returns of assets such as heavy tails, high-kurtosis and asymmetry (see [@tankov] for an introduction to financial applications).
From a mathematical point of view, Lévy processes are a natural extension of the Brownian motion which preserves the tractable statistical properties of its increments, while relaxing the continuity of paths. The jump dynamics of a Lévy process is dictated by its Lévy density, say $f$. If $f$ is continuous, its value at a point $x_0$ determines how frequent jumps of size close to $x_0$ are to occur per unit time. Concretely, if $X$ is a pure jump Lévy process with Lévy density $f$, then the function $f$ is such that $$\int_Af(x)dx=\frac{1}{t}{\ensuremath {\mathbb{E}}}\bigg[\sum_{s\leq t}{\ensuremath {\mathbb{I}}}_A(\Delta X_s)\bigg],$$ for any Borel set $A$ and $t>0$. Here, $\Delta X_s\equiv X_s-X_{s^-}$ denotes the magnitude of the jump of $X$ at time $s$ and ${\ensuremath {\mathbb{I}}}_A$ is the characteristic function. Thus, the Lévy measure $$\nu(A):=\int_A f(x)dx,$$ is the average number of jumps (per unit time) whose magnitudes fall in the set $A$. Understanding the jumps behavior, therefore requires to estimate the Lévy measure. Several recent works have treated this problem, see e.g. [@bel15] for an overview.
When the available data consists of the whole trajectory of the process during a time interval $[0,T]$, the problem of estimating $f$ may be reduced to estimating the intensity function of an inhomogeneous Poisson process (see, e.g. [@fig06; @rey03]). However, a continuous-time sampling is never available in practice and thus the relevant problem is that of estimating $f$ based on discrete sample data $X_{t_0},\dots,X_{t_n}$ during a time interval $[0,T_n]$. In that case, the jumps are latent (unobservable) variables and that clearly adds to the difficulty of the problem. From now on we will place ourselves in a high-frequency setting, that is we assume that the sampling interval $\Delta_n=t_i-t_{i-1}$ tends to zero as $n$ goes to infinity. Such a high-frequency based statistical approach has played a central role in the recent literature on nonparametric estimation for Lévy processes (see e.g. [@fig09; @comte10; @comte11; @bec12; @duval12]). Moreover, in order to make consistent estimation possible, we will also ask the observation time $T_n$ to tend to infinity in order to allow the identification of the jump part in the limit.
Our aim is to prove that, under suitable hypotheses, estimating the Lévy density $f$ is equivalent to estimating the drift of an adequate Gaussian white noise model. In general, asymptotic equivalence results for statistical experiments provide a deeper understanding of statistical problems and allow to single out their main features. The idea is to pass via asymptotic equivalence to another experiment which is easier to analyze. By definition, two sequences of experiments ${\ensuremath {\mathscr{P}}}_{1,n}$ and ${\ensuremath {\mathscr{P}}}_{2,n}$, defined on possibly different sample spaces, but with the same parameter set, are asymptotically equivalent if the Le Cam distance $\Delta({\ensuremath {\mathscr{P}}}_{1,n},{\ensuremath {\mathscr{P}}}_{2,n})$ tends to zero. For ${\ensuremath {\mathscr{P}}}_{i}=({\ensuremath {\mathscr{X}}}_i,{\ensuremath {\mathscr{A}}}_i, \big(P_{i,\theta}:\theta\in\Theta)\big)$, $i=1,2$, $\Delta({\ensuremath {\mathscr{P}}}_1,{\ensuremath {\mathscr{P}}}_2)$ is the symmetrization of the deficiency $\delta({\ensuremath {\mathscr{P}}}_1,{\ensuremath {\mathscr{P}}}_2)$ where $$\delta({\ensuremath {\mathscr{P}}}_{1},{\ensuremath {\mathscr{P}}}_{2})=\inf_K\sup_{\theta\in\Theta}\big\|KP_{1,\theta}-P_{2,\theta}\big\|_{TV}.$$ Here the infimum is taken over all randomizations from $({\ensuremath {\mathscr{X}}}_1,{\ensuremath {\mathscr{A}}}_1)$ to $({\ensuremath {\mathscr{X}}}_2,{\ensuremath {\mathscr{A}}}_2)$ and $\| \cdot \|_{TV}$ denotes the total variation distance. Roughly speaking, the Le Cam distance quantifies how much one fails to reconstruct (with the help of a randomization) a model from the other one and vice versa. Therefore, we say that $\Delta({\ensuremath {\mathscr{P}}}_1,{\ensuremath {\mathscr{P}}}_2)=0$ can be interpreted as “the models ${\ensuremath {\mathscr{P}}}_1$ and ${\ensuremath {\mathscr{P}}}_2$ contain the same amount of information about the parameter $\theta$.” The general definition of randomization is quite involved but, in the most frequent examples (namely when the sample spaces are Polish and the experiments dominated), it reduces to that of a Markov kernel. One of the most important feature of the Le Cam distance is that it can be also interpreted in terms of statistical decision theory (see [@lecam; @LC2000]; a short review is presented in the Appendix). As a consequence, saying that two statistical models are equivalent means that any statistical inference procedure can be transferred from one model to the other in such a way that the asymptotic risk remains the same, at least for bounded loss functions. Also, as soon as two models, ${\ensuremath {\mathscr{P}}}_{1,n}$ and ${\ensuremath {\mathscr{P}}}_{2,n}$, that share the same parameter space $\Theta$ are proved to be asymptotically equivalent, the same result automatically holds for the restrictions of both ${\ensuremath {\mathscr{P}}}_{1,n}$ and ${\ensuremath {\mathscr{P}}}_{2,n}$ to a smaller subclass of $\Theta$.
Historically, the first results of asymptotic equivalence in a nonparametric context date from 1996 and are due to [@BL] and [@N96]. The first two authors have shown the asymptotic equivalence of nonparametric regression and a Gaussian white noise model while the third one those of density estimation and white noise. Over the years many generalizations of these results have been proposed such as [@regression02; @GN2002; @ro04; @C2007; @cregression; @R2008; @C2009; @R2013; @schmidt14] for nonparametric regression or [@cmultinomial; @j03; @BC04] for nonparametric density estimation models. Another very active field of study is that of diffusion experiments. The first result of equivalence between diffusion models and Euler scheme was established in 1998, see [@NM]. In later papers generalizations of this result have been considered (see [@C14; @esterdiffusion]). Among others we can also cite equivalence results for generalized linear models [@GN], time series [@GN2006; @NM], diffusion models [@D; @CLN; @R2006; @rmultidimensionale], GARCH model [@B], functional linear regression [@M2011], spectral density estimation [@GN2010] and volatility estimation [@R11]. Negative results are somewhat harder to come by; the most notable among them are [@sam96; @B98; @wang02]. There is however a lack of equivalence results concerning processes with jumps. A first result in this sense is [@esterESAIM] in which global asymptotic equivalences between the experiments generated by the discrete or continuous observation of a path of a Lévy process and a Gaussian white noise experiment are established. More precisely, in that paper, we have shown that estimating the drift function $h$ from a continuously or discretely (high frequency) time inhomogeneous jump-diffusion process: $$\label{ch4X}
X_t=\
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: |
We give a general construction of debiased/locally robust/orthogonal (LR) moment functions for GMM, where the derivative with respect to first step nonparametric estimation is zero and equivalently first step estimation has no effect on the influence function. This construction consists of adding an estimator of the influence function adjustment term for first step nonparametric estimation to identifying or original moment conditions. We also give numerical methods for estimating LR moment functions that do not require an explicit formula for the adjustment term.
LR moment conditions have reduced bias and so are important when the first step is machine learning. We derive LR moment conditions for dynamic discrete choice based on first step machine learning estimators of conditional choice probabilities.
We provide simple and general asymptotic theory for LR estimators based on sample splitting. This theory uses the additive decomposition of LR moment conditions into an identifying condition and a first step influence adjustment. Our conditions require only mean square consistency and a few (generally either one or two) readily interpretable rate conditions.
LR moment functions have the advantage of being less sensitive to first step estimation. Some LR moment functions are also doubly robust meaning they hold if one first step is incorrect. We give novel classes of doubly robust moment functions and characterize double robustness. For doubly robust estimators our asymptotic theory only requires one rate condition.
Keywords: Local robustness, orthogonal moments, double robustness, semiparametric estimation, bias, GMM.
JEL classification:
: C13; C14; C21; D24
author:
- |
Victor Chernozhukov\
*MIT*
- |
Juan Carlos Escanciano\
*Indiana University*
- |
Hidehiko Ichimura\
*University of Tokyo*
- |
Whitney K. Newey\
*MIT*
- |
James M. Robins\
*Harvard University*
date: April 2018
title: Locally Robust Semiparametric Estimation
---
Introduction
============
There are many economic parameters that depend on nonparametric or large dimensional first steps. Examples include dynamic discrete choice, games, average consumer surplus, and treatment effects. This paper shows how to construct moment functions for GMM estimators that are debiased/locally robust/orthogonal (LR), where moment conditions have a zero derivative with respect to the first step. We show that LR moment functions can be constructed by adding the influence function adjustment for first step estimation to the original moment functions. This construction can also be interpreted as a decomposition of LR moment functions into identifying moment functions and a first step influence function term. We use this decomposition to give simple and general conditions for root-n consistency and asymptotic normality, with different properties being assumed for the identifying and influence function terms. The conditions are easily interpretable mean square consistency and second order remainder conditions based on estimated moments that use cross-fitting (sample splitting). We also give numerical estimators of the influence function adjustment.
LR moment functions have several advantages. LR moment conditions bias correct in a way that eliminates the large biases from plugging in first step machine learning estimators found in Belloni, Chernozhukov, and Hansen (2014). LR moment functions can be used to construct debiased/double machine learning (DML) estimators, as in Chernozhukov et al. (2017, 2018).
We illustrate by deriving LR moment functions for dynamic discrete choice estimation based on conditional choice probabilities. We provide a DML estimator for dynamic discrete choice that uses first step machine learning of conditional choice probabilities. We find that it performs well in a Monte Carlo example. Such structural models provide a potentially important application of DML, because of potentially high dimensional state spaces. Adding the first step influence adjustment term provides a general way to construct LR moment conditions for structural models so that machine learning can be used for first step estimation of conditional choice probabilities, state transition distributions, and other unknown functions on which structural estimators depend.
LR moment conditions also have the advantage of being relatively insensitive to small variation away from the first step true function. This robustness property is appealing in many settings where it may be difficult to get the first step completely correct. Many interesting and useful LR moment functions have the additional property that they are doubly robust (DR), meaning moment conditions hold when one first step is not correct. We give novel classes of DR moment conditions, including for average linear functionals of conditional expectations and probability densities. The construction of adding the first step influence function adjustment to an identifying moment function is useful to obtain these moment conditions. We also give necessary and sufficient conditions for a large class of moment functions to be DR. We find DR moments have simpler and more general conditions for asymptotic normality, which helps motivate our consideration of DR moment functions as special cases of LR ones. LR moment conditions also help minimize sensitivity to misspecification as in Bonhomme and Weidner (2018).
LR moment conditions have smaller bias from first step estimation. We show that they have the small bias property of Newey, Hsieh, and Robins (2004), that the bias of the moments is of smaller order than the bias of the first step. This bias reduction leads to substantial improvements in finite sample properties in many cases relative to just using the original moment conditions. For dynamic discrete choice we find large bias reductions, moderate variance increases and even reductions in some cases, and coverage probabilities substantially closer to nominal. For machine learning estimators of the partially linear model, Chernozhukov et al. (2017, 2018) found bias reductions so large that the LR estimator is root-n consistent but the estimator based on the original moment condition is not. Substantial improvements were previously also found for density weighted averages by Newey, Hsieh, and Robins (2004, NHR). The twicing kernel estimators in NHR are numerically equal to LR estimators based on the original (before twicing) kernel, as shown in Newey, Hsieh, Robins (1998), and the twicing kernel estimators were shown to have smaller mean square error in large samples. Also, a Monte Carlo example in NHR finds that the mean square error (MSE) of the LR estimator has a smaller minimum and is flatter as a function of bandwidth than the MSE of Powell, Stock, and Stoker’s (1989) density weighted average derivative estimator. We expect similar finite sample improvements from LR moments in other cases.
LR moment conditions have appeared in earlier work. They are semiparametric versions of Neyman (1959) C-alpha test scores for parametric models. Hasminskii and Ibragimov (1978) suggested LR estimation of functionals of a density and argued for their advantages over plug-in estimators. Pfanzagl and Wefelmeyer (1981) considered using LR moment conditions for improving the asymptotic efficiency of functionals of distribution estimators. Bickel and Ritov (1988) gave a LR estimator of the integrated squared density that attains root-n consistency under minimal conditions. The Robinson (1988) semiparametric regression and Ichimura (1993) index regression estimators are LR. Newey (1990) showed that LR moment conditions can be obtained as residuals from projections on the tangent set in a semiparametric model. Newey (1994a) showed that derivatives of an objective function where the first step has been “concentrated out” are LR, including the efficient score of a semiparametric model. NHR (1998, 2004) gave estimators of averages that are linear in density derivative functionals with remainder rates that are as fast as those in Bickel and Ritov (1988). Doubly robust moment functions have been constructed by Robins, Rotnitzky, and Zhao (1994, 1995), Robins and Rotnitzky (1995), Scharfstein, Rotnitzky, and Robins (1999), Robins, Rotnitzky, and van der Laan (2000), Robins and Rotnitzky (2001), Graham (2011), and Firpo and Rothe (2017). They are widely used for estimating treatment effects, e.g. Bang and Robins (2005). Van der Laan and Rubin (2006) developed targeted maximum likelihood to obtain a LR estimating equation based on the efficient influence function of a semiparametric model. Robins et al. (2008, 2017) showed that efficient influence functions are LR, characterized some doubly robust moment conditions, and developed higher order influence functions that can reduce bias. Belloni, Chernozhukov, and Wei (2013), Belloni, Chernozhukov, and Hansen (2014), Farrell (2015), Kandasamy et al. (2015), Belloni, Chernozhukov, Fernandez-Val, and Hansen (2016), and Athey, Imbens, and Wager (2017) gave LR estimators with machine learning first steps in several specific contexts.
A main contribution of this paper is the construction of LR moment conditions from any moment condition and first step estimator that can result in a root-n consistent estimator of the parameter of interest. This construction is based on the limit of the first step when a data observation has a general distribution that allows for misspecification, similarly to Newey (1994). LR moment functions are constructed by adding to identifying moment functions the influence function of the true expectation of the identifying moment functions evaluated at the first step limit, i.e. by adding the influence function term that accounts for first step estimation. The addition of the influence adjustment “partials out” the first order effect of the first step on the moments. This construction of LR moments extends those cited above for first step density and distribution estimators to *any first step,* including instrumental variable estimators. Also, this construction is *estimator based* rather than model based
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: 'In state space models, smoothing refers to the task of estimating a latent stochastic process given noisy measurements related to the process. We propose an unbiased estimator of smoothing expectations. The lack-of-bias property has methodological benefits: independent estimators can be generated in parallel, and confidence intervals can be constructed from the central limit theorem to quantify the approximation error. To design unbiased estimators, we combine a generic debiasing technique for Markov chains with a Markov chain Monte Carlo algorithm for smoothing. The resulting procedure is widely applicable and we show in numerical experiments that the removal of the bias comes at a manageable increase in variance. We establish the validity of the proposed estimators under mild assumptions. Numerical experiments are provided on toy models, including a setting of highly-informative observations, and a realistic Lotka-Volterra model with an intractable transition density.'
author:
- |
Pierre E. Jacob[^1]\
Department of Statistics, Harvard University\
Fredrik Lindsten and Thomas B. Schön\
Department of Information Technology, Uppsala University
bibliography:
- 'Biblio.bib'
title: '**Smoothing with Couplings of Conditional Particle Filters**'
---
\#1
[*Keywords:*]{} couplings, particle filtering, particle smoothing, debiasing techniques, parallel computation.
Introduction\[sec:introduction\]
================================
Goal and content
----------------
In state space models, the observations are treated as noisy measurements related to an underlying latent stochastic process. The problem of smoothing refers to the estimation of trajectories of the underlying process given the observations [@cappe:ryden:2004]. For finite state spaces and linear Gaussian models, smoothing can be performed exactly. In general models, numerical approximations are required, and many state-of-the-art methods are based on particle methods [@douc:moulines:2014; @kantas2015particle]. Following this line of work, we propose a new method for smoothing in general state space models. Unlike existing methods, the proposed estimators are unbiased, which has direct benefits for parallelization and for the construction of confidence intervals.
The proposed method combines recently proposed conditional particle filters [@andrieu:doucet:holenstein:2010] with debiasing techniques for Markov chains [@glynn2014exact]. Specifically, we show in Section \[sec:unbiasedsmoothing\] how to remove the bias of estimators constructed with conditional particle filters, in exchange for an increase of variance; this variance can then be controlled with tuning parameters, and arbitrarily reduced by averaging over independent replicates. The validity of the proposed approach relies on the finiteness of the computational cost and of the variance of the proposed estimators, which we establish under mild conditions in Section \[sec:newsmoother:theory\]. Methodological improvements are presented in Section \[sec:newsmoother:practical\], and comparisons with other smoothers in Section \[sec:comparison\]. Numerical experiments are provided in Section \[sec:numerics\], and Section \[sec:discussion\] concludes.
Smoothing in state space models \[sec:intro:smoothing\]
-------------------------------------------------------
The latent stochastic process $(x_{t})_{t\geq 0}$ takes values in $\mathbb{X}\subset
\mathbb{R}^{d_x}$, and the observations $(y_t)_{t\geq 1}$ are in $\mathbb{Y}\subset
\mathbb{R}^{d_y}$ for some $d_x,d_y \in\mathbb{N}$. A model specifies an initial distribution $m_0(dx_{0}|\theta)$ and a transition kernel $f(dx_{t}| x_{t-1},\theta)$ for the latent process. We will assume that we have access to deterministic functions $M$ and $F$, and random variables $U_t$ for $t\geq 0$, such that $M(U_0,\theta)$ follows $m_0(dx_0|\theta)$ and $F(x_{t-1},U_t,\theta)$ follows $f(dx_t|x_{t-1},\theta)$; we refer to these as random function representations of the process [see @diaconis1999iterated]. Conditionally upon the latent process, the observations are independent and their distribution is given by a measurement kernel $g(dy_{t}| x_{t},\theta)$. The model is parameterized by $\theta\in\Theta\subset \mathbb{R}^{d_\theta}$, for $d_\theta\in\mathbb{N}$. Filtering consists in approximating the distribution $p(dx_{t}|
y_{1:t},\theta)$ for all times $t\geq 1$, whereas smoothing refers to the approximation of $p(dx_{0:T}|y_{1:T},\theta)$ for a fixed time horizon $T$, where for $s,t\in\mathbb{N}$, we write $s:t$ for the set $\{s,\ldots,t\}$, and $v_{s:t}$ for the vector $(v_s,\ldots,v_t)$. The parameter $\theta$ is hereafter fixed and removed from the notation, as is usually done in the smoothing literature [see Section 4 in @kantas2015particle]; we discuss unknown parameters in Section \[sec:discussion\]. Denote by $h$ a test function from $\mathbb{X}^{T+1}$ to $\mathbb{R}$, of which we want to compute the expectation with respect to the smoothing distribution $\pi(dx_{0:T})=p(dx_{0:T}|y_{1:T})$; we write $\pi(h)$ for $\int_{\mathbb{X}^{T+1}} h(x_{0:T}) \pi(dx_{0:T})$. For instance, with $h:x_{0:T}\mapsto x_t$ where $t\in 0:T$, $\pi(h)$ is the smoothing expectation $\mathbb{E}[x_t|y_{1:T}]$.
Postponing a discussion on existing smoothing methods to Section \[sec:comparison\], we first describe the conditional particle filter [CPF, @andrieu:doucet:holenstein:2010], which is a variant of the particle filter [@doucet:defreitas:gordon:2001]. Given a “reference” trajectory $X = x_{0:T}$, a CPF generates a new trajectory $X^\prime = x_{0:T}^\prime$ as described in Algorithm \[alg:conditional-particle-filter\], which defines a Markov kernel on the space of trajectories; we will write $x^\prime_{0:T} \sim \text{CPF}(x_{0:T},\cdot)$. This Markov kernel leaves $\pi$ invariant and ergodic averages of the resulting chains consistently estimate integrals with respect to $\pi$, under mild conditions [@andrieu:doucet:holenstein:2010; @ChopinS:2015; @LindstenDM:2015; @andrieuvihola2013uniform; @kuhlenschmidt2018stability; @Lee2018ccbpf]. We denote by $(X^{(n)})_{n\geq 0}$ a chain starting from a path $X^{(0)}$, and iterating through $X^{(n)}\sim\text{CPF}(X^{(n-1)},\cdot)$ for $n\geq 1$.
1. 2.
<!-- -->
1. 2. 3.
<!-- -->
1. 2.
In step 2.1. of Algorithm \[alg:conditional-particle-filter\], the resampling distribution $r(da^{1:N-1}|w^{1:N})$ refers to a distribution on $\{1,\ldots,N\}^{N-1}$ from which “ancestors” are drawn according to particle weights. The resampling distribution is an algorithmic choice; specific schemes for the conditional particle filter are described in @ChopinS:2015. Here we will use multinomial resampling throughout. In step 2.3., “normalize the weights” means dividing them by their sum. Instead of bootstrap particle filters [@gordon:salmon:smith:1993], where particles are propagated from the model transition, more sophisticated filters can readily be used in the CPF procedure. For instance, performance gains can be obtained with auxiliary particle filters [@pitt1999filtering; @johansen2008note], as illustrated in Section \[sec:numerics:hiddenar\]. In presenting algorithms we focus on bootstrap particle filters for simplicity. When the transition density is tractable, extensions of the CPF include backward sampling [@whiteleycommentonpmcmc; @LindstenS:2013] and ancestor sampling [@LindstenJS:2014], which is beneficial in the proposed approach as illustrated in Section \[sec:numerics:hiddenar\]. The complexity of a standard CPF update is of order $NT$, and the memory requirements are of order $T + N\log N$ [@jacob2015path].
The proposed method relies on CPF kernels but is different from Markov chain Monte Carlo (MCMC) estimators: it involves independent copies of unbiased estimators of $\pi(h)$. Thus it will be amenable to parallel computation and confidence intervals will be constructed in a different way than with standard MCMC output [e.g. Chapter 7 in @gelman2010handbook]; see Section \[sec:comparison\] for a comparison with existing smoothers.
Debiasing Markov chains \[sec:debiasing\]
-----------------------------------------
We briefly recall the debiasing technique of @glynn2014exact, see also @McLeish:2011 [@Rhee:Glynn:
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: 'We analytically derive the upper bound on the overall efficiency of single-photon generation based on cavity quantum electrodynamics (QED), where cavity internal loss is treated explicitly. The internal loss leads to a tradeoff relation between the internal generation efficiency and the escape efficiency, which results in a fundamental limit on the overall efficiency. The corresponding lower bound on the failure probability is expressed only with an “internal cooperativity," introduced here as the cooperativity parameter with respect to the cavity internal loss rate. The lower bound is obtained by optimizing the cavity external loss rate, which can be experimentally controlled by designing or tuning the transmissivity of the output coupler. The model used here is general enough to treat various cavity-QED effects, such as the Purcell effect, on-resonant or off-resonant cavity-enhanced Raman scattering, and vacuum-stimulated Raman adiabatic passage. A repumping process, where the atom is reused after its decay to the initial ground state, is also discussed.'
author:
- 'Hayato Goto,$^1$ Shota Mizukami,$^2$ Yuuki Tokunaga,$^3$ and Takao Aoki$^2$'
title: 'Fundamental Limit on the Efficiency of Single-Photon Generation Based on Cavity Quantum Electrodynamics'
---
*Introduction*. Single-photon sources are a key component for photonic quantum information processing and quantum networking [@Kimble2008a]. Single-photon sources based on cavity quantum electrodynamics (QED) [@Eisaman2011a; @Rempe2015a; @Kuhn2010a; @Law1997a; @Vasilev2010a; @Maurer2004a; @Barros2009a; @Kuhn1999a; @Duan2003a] are particularly promising, because they enable deterministic emission into a single mode, which is desirable for low-loss and scalable implementations. Many single-photon generation schemes have been proposed and studied using various cavity-QED effects, such as the Purcell effect [@Eisaman2011a; @Rempe2015a; @Kuhn2010a], on-resonant [@Kuhn2010a; @Law1997a; @Vasilev2010a] or off-resonant [@Maurer2004a; @Barros2009a] cavity-enhanced Raman scattering, and vacuum-stimulated Raman adiabatic passage (vSTIRAP) [@Eisaman2011a; @Rempe2015a; @Kuhn2010a; @Vasilev2010a; @Kuhn1999a; @Duan2003a; @Maurer2004a].
The overall efficiency of single-photon generation based on cavity QED is composed of two factors: the internal generation efficiency $\eta_{\mathrm{in}}$ (probability that a photon is generated inside the cavity) and the escape efficiency $\eta_{\mathrm{esc}}$ (probability that a generated photon is extracted to a desired external mode). The upper bounds on $\eta_{\mathrm{in}}$, based on the cooperativity parameter $C$ [@Rempe2015a], have been derived for some of the above schemes [@Rempe2015a; @Kuhn2010a; @Law1997a; @Vasilev2010a]. $C$ is inversely proportional to the total cavity loss rate, $\kappa=\kappa_{\mathrm{ex}}+\kappa_{\mathrm{in}}$, where $\kappa_{\mathrm{ex}}$ and $\kappa_{\mathrm{in}}$ are the external and internal loss rates, respectively [@comment-loss]. Note that $\kappa_{\mathrm{ex}}$ can be experimentally controlled by designing or tuning the transmissivity of the output coupler. Thus, $\eta_{\mathrm{in}}$ is maximized by setting $\kappa_{\mathrm{ex}}$ to a small value so that $\kappa \approx \kappa_{\mathrm{in}}$. However, a low $\kappa_{\mathrm{ex}}$ results in a low escape efficiency $\eta_{\mathrm{esc}}=\kappa_{\mathrm{ex}}/\kappa$, which limits the channelling of the generated photons into the desired mode. There is therefore a *tradeoff* relation between $\eta_{\mathrm{in}}$ and $\eta_{\mathrm{esc}}$ with respect to $\kappa_{\mathrm{ex}}$, and $\kappa_{\mathrm{ex}}$ should be optimized to maximize the overall efficiency. This tradeoff relation has not been examined in previous studies, where the internal loss rate $\kappa_{\mathrm{in}}$ has not been treated explicitly. Additionally, previous studies on the photon-generation efficiency have not taken account of a repumping process, where the atom decays to the initial ground state via spontaneous emission and is “reused" for cavity-photon generation [@Barros2009a].
In this paper, we analytically derive the upper bound on the overall efficiency of single-photon generation based on cavity QED, by taking into account both the cavity internal loss and the repumping process. We use the model shown in Fig. \[fig-system\], which is able to describe most of the previously proposed generation schemes, with or without the repumping process, in a unified and generalized manner.
In particular, we show that the lower bound on the failure probability for single-photon generation, $P_F$, for the case of no repumping, is given by [@comment-on-Goto; @Goto2008a; @Goto2010a] $$\begin{aligned}
P_F
\ge
\frac{2}{\displaystyle 1+\sqrt{1+2C_{\mathrm{in}}}}
\approx \sqrt{\frac{2}{C_{\mathrm{in}}}},
\label{eq-PF}\end{aligned}$$ where we have introduced the “internal cooperativity," $$\begin{aligned}
C_{\mathrm{in}}=
\frac{g^2}{2\kappa_{\mathrm{in}} \gamma },
\label{eq-Cin}\end{aligned}$$ as the cooperativity parameter with respect to $\kappa_{\mathrm{in}}$ instead of $\kappa$ for the standard definition, $C=g^2/(2\kappa \gamma )$ [@Rempe2015a]. The approximation in Eq. (\[eq-PF\]) holds when $C_{\mathrm{in}} \gg 1$.
The lower bound on $P_F$ in Eq. (\[eq-PF\]) is obtained when $\kappa_{\mathrm{ex}}$ is set to its optimal value, $$\begin{aligned}
\kappa_{\mathrm{ex}}^{\mathrm{opt}}
\equiv \kappa_{\mathrm{in}} \sqrt{1+2C_{\mathrm{in}}},
\label{eq-optimal-kex}\end{aligned}$$ and is simply expressed as $2\kappa_{\mathrm{in}}/\kappa^{\mathrm{opt}}$, where $\kappa^{\mathrm{opt}}
\equiv
\kappa_{\mathrm{in}}
+
\kappa_{\mathrm{ex}}^{\mathrm{opt}}$ [@comment-kex]. Note that the experimental values of $(g,\gamma,\kappa_{\mathrm{in}})$ determine which regime the system should be in: the Purcell regime ($\kappa \gg g \gg \gamma$), the strong-coupling regime ( $g \gg (\kappa, \gamma)$), or the intermediate regime ($\kappa \approx g \gg \gamma$).
The remainder of this paper is organized as follows. First, we show that the present model is applicable to various cavity-QED single-photon generation schemes. Next, we provide the basic equations for the present analysis. Using these equations, we analytically derive an upper bound on the success probability, $P_S=1-P_F$, of single-photon generation. From here, we optimize $\kappa_{\mathrm{ex}}$ and derive Ineq. (\[eq-PF\]). We then briefly discuss the condition for typical optical cavity-QED systems. Finally, the conclusion and outlook are presented.
*Model*. As shown in Fig. \[fig-system\], we consider a cavity QED system with a $\Lambda$-type three-level atom in a one-sided cavity. The atom is initially prepared in $|u\rangle$. The $|u\rangle$-$|e\rangle$ transition is driven with an external classical field, while the $|g\rangle$-$|e\rangle$ transition is coupled to the cavity. This system is general enough to describe most of the cavity QED single-photon generation schemes.
For instance, by first exciting the atom to $|e\rangle$ with a resonant $\pi$ pulse (with time-dependent $\Omega$), or fast adiabatic passage (with time-dependent $\Delta_u$), the atom is able to decay to $|g\rangle$ with a decay rate enhanced by the Purcell effect [@Purcell1946a], generating a single photon. Here, the Purcell regime is assumed. [@Rempe2015a; @Kuhn2010a; @Eisaman2011a].
Another example is where the atom is weakly excited with small $\Omega$ and a cavity photon is generated by cavity-enhanced Raman scattering. Here, $\kappa \gg g$ is assumed in the on-resonant case ($\Delta_e=\Delta_u=0$) [@Kuhn2010a; @Law1997a; @Vasilev2010a], while $\Delta_e \gg g$ is assumed in the off-resonant case ($\Delta_u=0$) [@Barros2009a; @Maurer2004a].
A third example is based on vSTIRAP [@Rempe2015a; @Eisaman2011a; @Kuhn2010a; @Vasilev2010a; @Kuhn1999a; @Duan2003a; @Maurer2004a],
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: 'We present a study of a peculiar nebula MF16 associated with an Ultraluminous X-ray Source NGC6946 ULX-1. We use integral-field and long-slit spectral data obtained with the 6-m telescope (Russia). The nebula was for a long time considered powered by strong shocks enhancing both high-excitation and low-excitation lines. However, kinematical properties point to rather moderate expansion rates ($V_S \sim 100\div 200$[$km\,s^{-1}\,$]{}). The total power of the emission-line source exceeds by one or two orders of magnitude the power observed expansion rate can provide, that points towards the existence of an additional source of excitation and ionization. Using CLOUDY96.01 photoionization code we derive the properties of the photoionizing source. Its total UV/EUV luminosity must be about $10^{40}$ erg/s.'
date: '??? and in revised form ???'
---
Introduction {#sec:intro}
============
Quite a large number of Ultraluminous X-ray Sources (ULXs) are associated with emission-line nebulae (ULX Nebulae, ULXNe), mostly large-scale bubbles powered by shock waves [@pamir (Pakull & Mirioni, 2003)]. However, several exceptions are known like the nebula associated with HoII X-1 [@lehmann (Lehmann , 2005)], that is clearly a photoionized [H [ii]{}]{} region. Another well-known example is the nebula MF16 coincident with the ULX NGC6946 ULX1.
The attention to MF16 was first drawn by [@BF_94], who identified the object as a Supernova Remnant (SNR), according to the emission-line spectrum with bright collisionally-excited lines. It was long considered an unusually luminous SNR, because of its huge optical emission-line ($L_{H\alpha} = 1.9\times10^{39}erg\,s^{-1}$, according to [@BF_94], for the tangential size $20\times34pc$) and X-ray ($L_X = 2.5\times10^{39}erg\,s^{-1}$ in the $0.5-8$keV range, according to the luminosities given by [@RoCo]).
However, it was shown by [@RoCo], that the spectral, spatial and timing properties of the X-ray source do not agree with the suggestion of a bright SNR, but rather suppose a point source with a typical “ULX-like” X-ray spectrum: cool Multicolor Disk (MCD) and a Power Law (PL) component. So, apart from the physical nature of the object, MF16 should be considered a [*ULX nebula*]{}, one of a new class of objects, described by [@pamir].
Optical Spectroscopy {#sec:obs}
====================
All the data were obtained on the SAO 6m telescope, Russia. Two spectrographs were used: panoramic MultiPupil Fiber Spectrograph MPFS [@MPFSdesc (Afanasiev , 2001)] and SCORPIO focal reducer [@scorpio (Afanasiev & Moiseev, 2005)] in long-slit mode. The details of data reduction processes and analysis technique will be presented in [@mf16_main]. Panoramic spectroscopy has the advantage of providing unbiased flux estimates. However, SCORPIO results have much higher signal-to-noise ratio and reveal rich emission-line spectrum of [\[Fe [iii]{}\]]{}. We also confirm the estimates of the total nebula emission-line luminosities by [@bfs]. $H\beta$ line luminosity obtained from our MPFS data is $L(H\beta) = (7.2\pm0.2)\times10^{37}erg\,s^{-1}$.
Using line ratios for the integral spectrum we estimate the mean parameters of emitting gas as: $n_e \simeq 500\pm 100 \,cm^{-3}$, $T_e \simeq (1.9\pm0.2) \times 10^4 K$. Interstellar absorption is estimated as $A_V \sim 1{^{\rm m}\!\!\!.\,}3$, close to the Galactic value ($A_V^{Gal} = 1{^{\rm m}\!\!\!.\,}14$, according to [@schlegel_abs])
We confirm the estimate of the expansion rate obtained by [@dunne], coming to the conclusion that the expansion velocity is $V_S \lesssim 200$[$km\,s^{-1}\,$]{}. In this case the total emission-line luminosity can be estimated using for example the equations be [@DoSutI]:
$$\begin{array}{l}
F_{H\beta} = 7.44 \times 10^{-6} \left( \frac{V_s}{100 km\, s^{-1}} \right)^{2.41}
\times \left( \frac{n_2}{cm^{-3}}\right)
+ \\
\qquad{}
9.86 \times 10^{-6} \left( \frac{V_s}{100 km \,s^{-1}} \right)^{2.28}
\times \left( \frac{n_1}{cm^{-3}}\right) \, erg\, cm^{-2} s^{-1}
\end{array}$$
Here $V_S$ is the shock velocity and $n_1$ the pre-shock hydrogen density. If the surface area is known, one can obtain the total luminosity in $H\beta$ from here. For $V_S = 200km/s$ and $n_1 = 1cm^{-3}$ it appears to be $L(H\beta) \simeq 1.6 \times 10^{36}$[ergs s$^{-1}$]{}, that is too low compared to the observed value. So we suggest an additional source of power providing most of the energy of the optical nebula.
Photoionization Modelling
=========================
We have computed a grid of CLOUDY96.01 [@cloudy98 (Ferland , 1998)] photoionization models in order to fit MF16 spectrum avoiding shock waves. We have fixed X-ray spectrum known from [*Chandra*]{} observations [@RoCo (Roberts & Colbert, 2003)], assuming all the plasma is situated at 10pc from the central point source, and introduced a blackbody source with the temperature changing from $10^3$ to $10^6$K and integral flux densities from 0.01 to 100 $erg\,cm^{-2}\,s^{-1}$.
The best fit parameters are $\lg T(K) = 5.15\pm 0.05, F = 0.6\pm 0.1 erg\,cm^{-2}\,s^{-1}$, that suggests quite a luminous ultraviolet source: $L_{UV} =
(7.5\pm0.5) \times 10^{39} erg\,s^{-1}$.The UV source is more than 100 times brighter then what can be predicted by extrapolating the thermal component of the best-fit model for X-ray data [@RoCo (Roberts & Colbert, 2003)].
Ultraluminous UV sources?
=========================
At least for one source we have indications that its X-ray spectrum extends in the EUV region. It is interesting to analyse the implications in the frameworks of two most popular hypotheses explaining the ULX phenomenon.
For the standard disk of [@ss73] the inner temperature scales as:
$$T_{in} \simeq 1~keV\, \left(\frac{M}{M_\odot}\right)^{-1/4} \left(\frac{\dot{M}}{\dot{M}_{cr}}\right)^{1/4}$$
In Fig. \[fig:seds\] we present the reconstructed Spectral Energy Distribution of NGC6946 ULX-1 including optical identification by [@bfs] and the best-fit blackbody from our model. For comparison, a set of MCD SEDs for IMBHs accreting at 1% of critical rate is shown. To explain the high EUV luminosity and roughly flat SED in the EUV region, a rather high IMBH mass is needed, $M \gtrsim 10^4 $[$M_\odot$]{}.
For supercritical disk this relation breaks [@poutanen (Poutanen , 2006)], and the outcoming radiation becomes much softer, except for the X-rays escaping along the disk axis [@superkarpov (Fabrika , 2007)]. Most part of the luminosity is supposed to be reprocessed into EUV and UV quanta, creating the nearly-flat SED of NGC6946 ULX1. In optical/UV range contribution of the donor star may become significant.
![NGC6946 ULX1 SED reconstruction. Optical source $d$ [@bfs (Blair , 2000)] is shown by an asterisk, and the upward arrow above indicates the unabsorbed optical luminosity: it is the lower estimate because only Galactic absorption was taken into account, $A_V =
1{^{\rm m}\!\!\!.\,}14$ according to [@schlegel_abs]. Dashed line represents the best-fit blackbody from our CLOUDY fitting. Thin solid lines are MCD models for accreting IMBHs with infinite outer disk radii. Mass accretion rate was set everywhere to $0.01 \dot{M}_{cr}$. []{data-label="fig:seds"}](abolmasov
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: |
Flexible and performant Persistency Service is a necessary component of any HEP Software Framework. The building of a modular, non-intrusive and performant persistency component have been shown to be very difficult task. In the past, it was very often necessary to sacrifice modularity to achieve acceptable performance. This resulted in the strong dependency of the overall Frameworks on their Persistency subsystems.
Recent development in software technology has made possible to build a Persistency Service which can be transparently used from other Frameworks. Such Service doesn’t force a strong architectural constraints on the overall Framework Architecture, while satisfying high performance requirements. Java Data Object standard (JDO) has been already implemented for almost all major databases. It provides truly transparent persistency for any Java object (both internal and external). Objects in other languages can be handled via transparent proxies. Being only a thin layer on top of a used database, JDO doesn’t introduce any significant performance degradation. Also Aspect-Oriented Programming (AOP) makes possible to treat persistency as an orthogonal Aspect of the Application Framework, without polluting it with persistence-specific concepts.
All these techniques have been developed primarily (or only) for the Java environment. It is, however, possible to interface them transparently to Frameworks built in other languages, like for example C++.
Fully functional prototypes of flexible and non-intrusive persistency modules have been build for several other packages, as for example FreeHEP AIDA and LCG Pool AttributeSet (package Indicium).
author:
- Julius Hřivnáč
title: Transparent Persistence with Java Data Objects
---
JDO
===
Requirements on Transparent Persistence
---------------------------------------
The Java Data Object (JDO) [@JDO1],[@JDO2],[@Standard],[@Portal] standard has been created to satisfy several requirements on the object persistence in Java:
- [**Object Model independence on persistency**]{}:
- Java types are automatically mapped to native storage types.
- 3rd party objects can be persistified (even when their source is not available).
- The source of the persistent class is the same as the source of the transient class. No additional code is needed to make a class persistent.
- All classes can be made persistent (if it has a sense).
- [**Illusion of in-memory access to data**]{}:
- Dirty instances (i.e. objects which have been changed after they have been read) are implicitly updated in the database.
- Catching, synchronization, retrieval and lazy loading are done automatically.
- All objects, referenced from a persistent object, are automatically persistent ([*Persistence by reachability*]{}).
- [**Portability across technologies**]{}:
- A wide range of storage technologies (relational databases, object-oriented databases, files,…) can be transparently used.
- All JDO implementations are exchangeable.
- [**Portability across platforms**]{} is automatically available in Java.
- [**No need for a different language**]{} (DDL, SQL,…) to handle persistency (incl. queries).
- [**Interoperability with Application Servers**]{} (EJB [@EJB],…).
Architecture of Java Data Objects
---------------------------------
The Java Data Objects standard (Java Community Process Open Standard JSR-12) [@Standard] has been created to satisfy the requirements listed in the previous paragraph.
{width="135mm"}
The persistence capability is added to a class by the Enhancer (as shown in Figure \[Enhancement\]):
- Enhancer makes a transient class PersistenceCapable by adding it all data and methods needed to provide the persistence functionality. After enhancement, the class implements PersistenceCapable interface (as shown in Figure \[PersistenceCapable\]).
- Enhancer is generally applied to a class-file, but it can be also part of a compiler or a loader.
- Enhancing effects can be modified via Persistence Descriptor (XML file).
- All enhancers are compatible. Classes enhanced with one JDO implementation will work automatically with all other implementations.
![Enhancer makes any class PersistenceCapable.[]{data-label="PersistenceCapable"}](PersistenceCapable.eps){width="80mm"}
The main object, a user interacts with, is the PersistenceManager. It mediates all interactions with the database, it manages instances lifecycle and it serves as a factory for Transactions, Queries and Extents (as described in Figure \[PersistenceManager\]).
![All interactions with JDO are mediated by PersistenceManager.[]{data-label="PersistenceManager"}](PersistenceManager.eps){width="80mm"}
Available Implementations
-------------------------
After about a year since the JDO standardization, there are already many implementations available supporting all existing storage technologies.
JDO Implementations
-------------------
### Commercial JDO Implementations
Following commercial implementations of JDO standard exist:
enJin(Versant), FastObjects(Poet), FrontierSuit(ObjectFrontier), IntelliBO (Signsoft), JDOGenie(Hemisphere), JRelay(Object Industries), KODO(SolarMetric), LiDO(LIBeLIS), OpenFusion(Prism), Orient(Orient), PE:J(HYWY), …
These implementation often have a free community license available.
### Open JDO Implementations
There are already several open JDO implementations available:
- [**JDORI**]{} [@JDORI] (Sun) is the reference and standard implementation. It currently only works with the FOStore files. Support for a relational database via JDBC implementation is under development. It is the most standard, but not the most performant implementation.
- [**TJDO**]{} [@TJDO] (SourceForge) is a high quality implementation originally written by the TreeActive company, later put on the GPL license. It supports all important relational databases. It supports an automatic creation of the database schema. It implements full JDO standard.
- [**XORM**]{} [@XORM] (SourceForge) does not yet support full JDO standard. It does not automatically generate a database schema, on the other hand, it allows a reuse of existing schemas.
- [**JORM**]{} [@JORM] (JOnAS/ObjectWeb) has a fully functional object-relational mapping, the full JDO implementation is under development.
- [**OJB**]{} [@OJB] (Apache) has a mature object-relational engine. Full JDO interface is not yet provided.
Supported Databases
-------------------
All widely used databases are already supported either by their provider or by a third party:
- [**RDBS and ODBS**]{}: Oracle, MS SQL Server, DB2, PointBase, Cloudscape, MS Access, JDBC/ODBC Bridge, Sybase, Interbase, InstantDB, Informix, SAPDB, Postgress, MySQL, Hypersonic SQL, Versant,…
- [**Files**]{}: XML, FOSTORE, flat, C-ISAM,…
The performance of JDO implementations is determined by the native performance of a database. JDO itself introduces a very small overhead.
HEP Applications using JDO
==========================
Trivial Application
-------------------
A simple application using JDO to write and read data is shown in Listing \[Trivial\].
[|l|]{} $//\ Initialization$\
$PersistenceManagerFactory\ pmf = JDOHelper.getPersistenceManagerFactory(properties);$\
$PersistenceManager\ pm = pmf.getPersistenceManager();$\
$Transaction\ tx = pm.currentTransaction();$\
\
$//\ Writing$\
$tx.begin();$\
$\dots$\
$Event\ event = \dots;$\
$pm.makePersistent(event);$\
$\dots$\
$tx.commit();$\
\
$//\ Searching\ using\ Java-like\ query\ language\ translated\ internally\ to\ DB\ native\ query\ language$\
$//\ (SQL\ available\ too\ for\ RDBS)$\
$tx.begin();$\
$Extent\ extent = pm.getExtent(Track.class, true);$\
$String\ filter = "pt > 20.0";$\
$Query\ query = pm.newQuery(extent, filter);$\
$Collection\ results = query.execute();$\
$\dots$\
$tx.commit();$\
Indicium
--------
Indicium [@Indicium] has been created to satisfy the LCG [@LCG] Pool [@Pool] requirements on the Metadata management: “To define, accumulate, search, filter and manage Attributes (Metadata) external/additional to existing (Event) data.” Those metadata are a generalization of the traditional Paw ntuple concept. They are used in the first phase of the analysis process to make a pre-selection of Event for further processing. They should be efficient. They are apparently closely related to Collections (of Events).
The Indicium package
|
{
"pile_set_name": "ArXiv"
}
|
Preprint hep-ph/0006089
[Improved Conformal Mapping of the Borel Plane]{}
U. D. Jentschura and G. Soff
[*Institut für Theoretische Physik, TU Dresden, 01062 Dresden, Germany*]{}\
[**Email:**]{} jentschura@physik.tu-dresden.de, soff@physik.tu-dresden.de
The conformal mapping of the Borel plane can be utilized for the analytic continuation of the Borel transform to the entire positive real semi-axis and is thus helpful in the resummation of divergent perturbation series in quantum field theory. We observe that the convergence can be accelerated by the application of Padé approximants to the Borel transform expressed as a function of the conformal variable, i.e. by a combination of the analytic continuation via conformal mapping and a subsequent numerical approximation by rational approximants. The method is primarily useful in those cases where the leading (but not sub-leading) large-order asymptotics of the perturbative coefficients are known.
11.15.Bt, 11.10.Jj General properties of perturbation theory;\
Asymptotic problems and properties
The problem of the resummation of quantum field theoretic series is of obvious importance in view of the divergent, asymptotic character of the perturbative expansions [@LGZJ1990; @ZJ1996; @Fi1997]. The convergence can be accelerated when additional information is available about large-order asymptotics of the perturbative coefficients [@JeWeSo2000]. In the example cases discussed in [@JeWeSo2000], the location of several poles in the Borel plane, known from the leading and next-to-leading large-order asymptotics of the perturbative coefficients, is utilized in order to construct specialized resummation prescriptions. Here, we consider a particular perturbation series, investigated in [@BrKr1999], where only the [*leading*]{} large-order asymptotics of the perturbative coefficients are known to sufficient accuracy, and the subleading asymptotics have – not yet – been determined. Therefore, the location of only a single pole – the one closest to the origin – in the Borel plane is available. In this case, as discussed in [@CaFi1999; @CaFi2000], the (asymptotically optimal) conformal mapping of the Borel plane is an attractive method for the analytic continuation of the Borel transform beyond its circle of convergence and, to a certain extent, for accelerating the convergence of the Borel transforms. Here, we argue that the convergence of the transformation can be accelerated further when the Borel transforms, expressed as a function of the conformal variable which mediates the analytic continuation, are additionally convergence-accelerated by the application of Padé approximants.
First we discuss, in general terms, the construction of the improved conformal mapping of the Borel plane which is used for the resummation of the perturbation series defined in Eqs. (\[gammaPhi4\]) and (\[gammaYukawa\]) below. The method uses as input data the numerical values of a finite number of perturbative coefficients and the leading large-order asymptotics of the perturbative coefficients, which can, under appropriate circumstances, be derived from an empirical investigation of a finite number of coefficients, as it has been done in [@BrKr1999]. We start from an asymptotic, divergent perturbative expansion of a physical observable $f(g)$ in powers of a coupling parameter $g$, $$\label{power}
f(g) \sim \sum_{n=0}^{\infty} c_n\,g^n\,,$$ and we consider the generalized Borel transform of the $(1,\lambda)$-type (see Eq. (4) in [@JeWeSo2000]), $$\label{BorelTrans}
f^{(\lambda)}_{\rm B}(u) \; \equiv \;
f^{(1,\lambda)}_{\rm B}(u) \; = \;
\sum_{n=0}^{\infty} \frac{c_n}{\Gamma(n+\lambda)}\,u^n\,.$$ The full physical solution can be reconstructed from the divergent series (\[power\]) by evaluating the Laplace-Borel integral, which is defined as $$\label{BorelIntegral}
f(g) = \frac{1}{g^\lambda} \,
\int_0^\infty {\rm d}u \,u^{\lambda - 1} \,
\exp\bigl(-u/g\bigr)\,
f^{(\lambda)}_{\rm B}(u)\,.$$ The integration variable $u$ is referred to as the Borel variable. The integration is carried out either along the real axis or infinitesimally above or below it (if Padé approximants are used for the analytic continuation, modified integration contours have been proposed [@Je2000]). The most prominent issue in the theory of the Borel resummation is the construction of an analytic continuation for the Borel transform (\[BorelTrans\]) from a finite-order partial sum of the perturbation series (\[power\]), which we denote by $$\label{PartialSum}
f^{(\lambda),m}_{\rm B}(u) =
\sum_{n=0}^{m} \frac{c_n}{\Gamma(n+\lambda)}\,u^n\,.$$ The analytic continuation can be accomplished using the direct application of Padé approximants to the partial sums of the Borel transform $f^{(\lambda),m}_{\rm B}(u)$ [@BrKr1999; @Je2000; @Raczka1991; @Pi1999] or by a conformal mapping [@SeZJ1979; @LGZJ1983; @GuKoSu1995; @CaFi1999; @CaFi2000]. We now assume that the [*leading*]{} large-order asymptotics of the perturbative coefficients $c_n$ defined in Eq. (\[power\]) is factorial, and that the coefficients display an alternating sign pattern. This indicates the existence of a singularity (branch point) along the negative real axis corresponding to the leading large-order growth of the perturbative coefficients, which we assume to be at $u=-1$. For Borel transforms which have only a single cut in the complex plane which extends from $u=-1$ to $u=-\infty$, the following conformal mapping has been recommended as optimal [@CaFi1999], $$\label{DefZ}
z = z(u) = \frac{\sqrt{1+u}-1}{\sqrt{1+u}+1}\,.$$ Here, $z$ is referred to as the conformal variable. The cut Borel plane is mapped unto the unit circle by the conformal mapping (\[DefZ\]). We briefly mention that a large variety of similar conformal mappings have been discussed in the literature .
It is worth noting that conformal mappings which are adopted for doubly-cut Borel planes have been discussed in [@CaFi1999; @CaFi2000]. We do not claim here that it would be impossible to construct conformal mappings which reflect the position of more than two renormalon poles or branch points in the complex plane. However, we stress that such a conformal mapping is likely to have a more complicated mathematical structure than, for example, the mapping defined in Eq. (27) in [@CaFi1999]. Using the alternative methods described in [@JeWeSo2000], poles (branch points) in the Borel plane corresponding to the subleading asymptotics can be incorporated easily provided their position in the Borel plane is known. In a concrete example (see Table 1 in [@JeWeSo2000]), 14 poles in the Borel plane have been fixed in the denominator of the Padé approximant constructed according to Eqs. (53)–(55) in [@JeWeSo2000], and accelerated convergence of the transforms is observed. In contrast to the investigation [@JeWeSo2000], we assume here that only the [*leading*]{} large-order factorial asymptotics of the perturbative coefficients are known.
We continue with the discussion of the conformal mapping (\[DefZ\]). It should be noted that for series whose leading singularity in the Borel plane is at $u = -u_0$ with $u_0 > 0$, an appropriate rescaling of the Borel variable $u \to |u_0|\, u$ is necessary on the right-hand side of Eq. (\[BorelIntegral\]). Then, $f^{(\lambda)}_{\rm B}(|u_0|\,u)$ as a function of $u$ has its leading singularity at $u = -1$ (see also Eq. (41.57) in [@ZJ1996]). The Borel integration variable $u$ can be expressed as a function of $z$ as follows, $$\label{UasFuncOfZ}
u(z) = \frac{4 \, z}{(z-1)^2}\,.$$ The $m$th partial sum of the Borel transform (\[PartialSum\]) can be rewritten, upon expansion of the $u$ in powers of $z$, as $$\label{PartialSumConformal}
f^{(\lambda),m}_{\rm B}(u) =
f^{(\lambda),m}_{\rm B}\bigl(u(z)\bigr) =
\sum_{n=0}^{m} C_n\,z^n + {\cal O}(z^{m+1})\,,$$ where the coefficients $C_n$ as a function of the $c_n$ are uniquely determined (see, e.g., Eqs. (36) and (37) of [@CaFi1999]). We define partial sum of the Borel transform, expressed as a function of the conformal variable $z$, as $$f'^{(\lambda),m}_{\rm B}(z) = \sum_{n=0}^{m} C_n\,z^n\,.$$ In a previous investigation [@CaFi1999], Cap
|
{
"pile_set_name": "ArXiv"
}
|
\[section\] \[theorem\][Lemma]{} \[theorem\][Proposition]{} \[theorem\][Corollary]{} \[theorem\][Remark]{} \[theorem\][Fact]{} \[theorem\][Problem]{}
@addtoreset
¶[[**P**]{}]{}
**A subdiffusive behaviour of recurrent random walk**
**in random environment on a regular tree**
by
Yueyun Hu $\;$and$\;$ Zhan Shi
*Université Paris XIII & Université Paris VI*
This version: March 11, 2006
=2truecm =2truecm
[***Summary.***]{} We are interested in the random walk in random environment on an infinite tree. Lyons and Pemantle [@lyons-pemantle] give a precise recurrence/transience criterion. Our paper focuses on the almost sure asymptotic behaviours of a recurrent random walk $(X_n)$ in random environment on a regular tree, which is closely related to Mandelbrot [@mandelbrot]’s multiplicative cascade. We prove, under some general assumptions upon the distribution of the environment, the existence of a new exponent $\nu\in (0, {1\over 2}]$ such that $\max_{0\le i \le n} |X_i|$ behaves asymptotically like $n^{\nu}$. The value of $\nu$ is explicitly formulated in terms of the distribution of the environment.
[***Keywords.***]{} Random walk, random environment, tree, Mandelbrot’s multiplicative cascade.
[***2000 Mathematics Subject Classification.***]{} 60K37, 60G50.
Introduction {#s:intro}
============
Random walk in random environment (RWRE) is a fundamental object in the study of random phenomena in random media. RWRE on $\z$ exhibits rich regimes in the transient case (Kesten, Kozlov and Spitzer [@kesten-kozlov-spitzer]), as well as a slow logarithmic movement in the recurrent case (Sinai [@sinai]). On $\z^d$ (for $d\ge 2$), the study of RWRE remains a big challenge to mathematicians (Sznitman [@sznitman], Zeitouni [@zeitouni]). The present paper focuses on RWRE on a regular rooted tree, which can be viewed as an infinite-dimensional RWRE. Our main result reveals a rich regime à la Kesten–Kozlov–Spitzer, but this time even in the recurrent case; it also strongly suggests the existence of a slow logarithmic regime à la Sinai.
Let $\T$ be a $\deg$-ary tree ($\deg\ge 2$) rooted at $e$. For any vertex $x\in \T \backslash \{ e\}$, let ${\buildrel \leftarrow \over x}$ denote the first vertex on the shortest path from $x$ to the root $e$, and $|x|$ the number of edges on this path (notation: $|e|:= 0$). Thus, each vertex $x\in \T \backslash \{ e\}$ has one parent ${\buildrel \leftarrow \over x}$ and $\deg$ children, whereas the root $e$ has $\deg$ children but no parent. We also write ${\buildrel \Leftarrow \over x}$ for the parent of ${\buildrel \leftarrow \over x}$ (for $x\in \T$ such that $|x|\ge 2$).
Let $\omega:= (\omega(x,y), \, x,y\in \T)$ be a family of non-negative random variables such that $\sum_{y\in \T} \omega(x,y)=1$ for any $x\in \T$. Given a realization of $\omega$, we define a Markov chain $X:= (X_n, \, n\ge 0)$ on $\T$ by $X_0 =e$, and whose transition probabilities are $$P_\omega(X_{n+1}= y \, | \, X_n =x) = \omega(x, y) .$$
Let $\P$ denote the distribution of $\omega$, and let $\p (\cdot) := \int P_\omega (\cdot) \P(\! \d \omega)$. The process $X$ is a $\T$-valued RWRE. (By informally taking $\deg=1$, $X$ would become a usual RWRE on the half-line $\z_+$.)
For general properties of tree-valued processes, we refer to Peres [@peres] and Lyons and Peres [@lyons-peres]. See also Duquesne and Le Gall [@duquesne-le-gall] and Le Gall [@le-gall] for continuous random trees. For a list of motivations to study RWRE on a tree, see Pemantle and Peres [@pemantle-peres1], p. 106.
We define $$A(x) := {\omega({\buildrel \leftarrow \over x},
x) \over \omega({\buildrel \leftarrow \over x},
{\buildrel \Leftarrow \over x})} , \qquad
x\in \T, \; |x|\ge 2.
\label{A}$$
Following Lyons and Pemantle [@lyons-pemantle], we assume throughout the paper that $(\omega(x,\bullet))_{x\in \T\backslash \{ e\} }$ is a family of i.i.d. [*non-degenerate*]{} random vectors and that $(A(x), \; x\in \T, \; |x|\ge 2)$ are identically distributed. We also assume the existence of $\varepsilon_0>0$ such that $\omega(x,y) \ge \varepsilon_0$ if either $x= {\buildrel \leftarrow \over y}$ or $y= {\buildrel \leftarrow \over x}$, and $\omega(x,y) =0$ otherwise; in words, $(X_n)$ is a nearest-neighbour walk, satisfying an ellipticity condition.
Let $A$ denote a generic random variable having the common distribution of $A(x)$ (for $|x| \ge 2$). Define $$p := \inf_{t\in [0,1]} \E (A^t) .
\label{p}$$
We recall a recurrence/transience criterion from Lyons and Pemantle ([@lyons-pemantle], Theorem 1 and Proposition 2).
[**Theorem A (Lyons and Pemantle [@lyons-pemantle])**]{} [*With $\p$-probability one, the walk $(X_n)$ is recurrent or transient, according to whether $p\le {1\over \deg}$ or $p>{1\over \deg}$. It is, moreover, positive recurrent if $p<{1\over \deg}$.*]{}
We study the recurrent case $p\le {1\over \deg}$ in this paper. Our first result, which is not deep, concerns the positive recurrent case $p< {1\over \deg}$.
\[t:posrec\] If $p<{1\over \deg}$, then $$\lim_{n\to \infty} \, {1\over \log n} \,
\max_{0\le i\le n} |X_i| =
{1\over \log[1/(q\deg)]},
\qquad \hbox{\rm $\p$-a.s.},
\label{posrec}$$ where the constant $q$ is defined in $(\ref{q})$, and lies in $(0, {1\over \deg})$ when $p<{1\over
\deg}$.
Despite the warning of Pemantle [@pemantle] (“there are many papers proving results on trees as a somewhat unmotivated alternative …to Euclidean space"), it seems to be of particular interest to study the more delicate situation $p={1\over \deg}$ that turns out to possess rich regimes. We prove that, similarly to the Kesten–Kozlov–Spitzer theorem for [*transient*]{} RWRE on the line, $(X_n)$ enjoys, even in the recurrent case, an interesting subdiffusive behaviour.
To state our main result, we define $$\begin{aligned}
\kappa
&:=& \inf\left\{ t>1: \; \E(A^t) = {1\over \deg}
\right\} \in (1, \infty], \qquad (\inf
\emptyset=\infty)
\label{kappa}
\\
\psi(t)
&:=& \log \E \left( A^t \right) , \qquad t\ge 0.
\label{psi}\end{aligned}$$
We use the notation $a_n \approx b_n$ to denote $\lim_{n\to \infty} \, {\log a_n \over \log b_n} =1$.
\[t:nullrec\] If $p={1\over \deg}$ and if $\psi'(1)<0$, then $$\max_{0\le i\le n} |X_i| \; \approx\; n^\nu,
\qquad \hbox{\rm $\p$-a.s.},
\label{nullrec}$$ where $\nu=\nu(\kappa)$ is defined by $$\nu := 1-
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: 'Feature selection (FS) is a key preprocessing step in data mining. CFS (Correlation-Based Feature Selection) is an FS algorithm that has been successfully applied to classification problems in many domains. We describe Distributed CFS (DiCFS) as a completely redesigned, scalable, parallel and distributed version of the CFS algorithm, capable of dealing with the large volumes of data typical of big data applications. Two versions of the algorithm were implemented and compared using the Apache Spark cluster computing model, currently gaining popularity due to its much faster processing times than Hadoop’s MapReduce model. We tested our algorithms on four publicly available datasets, each consisting of a large number of instances and two also consisting of a large number of features. The results show that our algorithms were superior in terms of both time-efficiency and scalability. In leveraging a computer cluster, they were able to handle larger datasets than the non-distributed WEKA version while maintaining the quality of the results, i.e., exactly the same features were returned by our algorithms when compared to the original algorithm available in WEKA.'
address:
- |
Systems Engineering Department,\
National Autonomous University of Honduras. Blvd. Suyapa, Tegucigalpa, Honduras
- |
Department of Computer Science, University of Alcalá\
Alcalá de Henares, 28871 Madrid, Spain
- |
Department of Computer Science, University of A Coruña\
Campus de Elviña s/n 15071 - A Coruña, Spain
author:
- 'Raul-Jose Palma-Mendoza'
- 'Luis de-Marcos'
- Daniel Rodriguez
- 'Amparo Alonso-Betanzos'
title: 'Distributed Correlation-Based Feature Selection in Spark'
---
feature selection ,scalability ,big data ,apache spark ,cfs ,correlation
Introduction {#sec:intro}
============
In recent years, the advent of big data has raised unprecedented challenges for all types of organizations and researchers in many fields. Xindong et al. [@XindongWu2014], however, state that the big data revolution has come to us not only with many challenges but also with plenty of opportunities for those organizations and researchers willing to embrace them. Data mining is one field where the opportunities offered by big data can be embraced, and, as indicated by Leskovec et al. [@Leskovec2014mining], the main challenge is to extract useful information or knowledge from these huge data volumes that enable us to predict or better understand the phenomena involved in the generation of the data.
Feature selection (FS) is a dimensionality reduction technique that has emerged as an important step in data mining. According to Guyon and Eliseeff [@Guyon2003] its purpose is twofold: to select relevant attributes and simultaneously to discard redundant attributes. This purpose has become even more important nowadays, as vast quantities of data need to be processed in all kinds of disciplines. Practitioners also face the challenge of not having enough computational resources. In a review of the most widely used FS methods, Bolón-Canedo et al. [@Bolon-Canedo2015b] conclude that there is a growing need for scalable and efficient FS methods, given that the existing methods are likely to prove inadequate for handling the increasing number of features encountered in big data.
Depending on their relationship with the classification process, FS methods are commonly classified in one of three main categories : (i) filter methods, (ii) wrapper methods, or (iii) embedded methods. *Filters* rely solely on the characteristics of the data and, since they are independent of any learning scheme, they require less computational effort. They have been shown to be important preprocessing techniques, with many applications such as churn prediction [@Idris2012; @Idris2013] and microarray data classification. In microarray data classification, filters obtain better or at least comparable results in terms of accuracy to wrappers [@Bolon-Canedo2015a]. In *wrapper* methods, the final subset selection is based on a learning algorithm that is repeatedly trained with the data. Although wrappers tend to increase the final accuracy of the learning scheme, they are usually more computationally expensive than the other two approaches. Finally, in *embedded* methods, FS is part of the classification process, e.g., as happens with decision trees.
Another important classification of FS methods is, according to their results, as (i) ranker algorithms or (ii) subset selector algorithms. With *rankers*, the result is a sorted set of the original features. The order of this returned set is defined according to the quality that the FS method determines for each feature. Some rankers also assign a weight to each feature that provides more information about its quality. *Subset selectors* return a non-ordered subset of features from the original set so that together they yield the highest possible quality according to some given measure. Subset selectors, therefore, consist of a search procedure and an evaluation measure. This can be considered an advantage in many cases, as rankers usually evaluate features individually and leave it to the user to select the number of top features in a ranking.
One filter-based subset selector method is the Correlation-Based Feature Selection (CFS) algorithm [@Hall2000], traditionally considered useful due to its ability not only to reduce dimensionality but also to improve classification algorithm performance. However, the CFS algorithm, like many other multivariate FS algorithms, has a time execution complexity $\mathcal{O}(m^2 \cdot n)$, where $m$ is the number of features and $n$ is the number of instances. This quadratic complexity in the number of features makes CFS very sensitive to the *the curse of dimensionality* [@bellman1957dynamic]. Therefore, a scalable adaptation of the original algorithm is required to be able to apply the CFS algorithm to datasets that are large both in number of instances and dimensions.
As a response to the big data phenomenon, many technologies and programming frameworks have appeared with the aim of helping data mining practitioners design new strategies and algorithms that can tackle the challenge of distributing work over clusters of computers. One such tool that has recently received much attention is Apache Spark [@Zaharia2010], which represents a new programming model that is a superset of the MapReduce model introduced by Google [@Dean2004a; @Dean2008]. One of Spark’s strongest advantages over the traditional MapReduce model is its ability to efficiently handle the iterative algorithms that frequently appear in the data mining and machine learning fields.
We describe two distributed and parallel versions of the original CFS algorithm for classification problems using the Apache Spark programming model. The main difference between them is how the data is distributed across the cluster, i.e., using a horizontal partitioning scheme (hp) or using a vertical partitioning scheme (vp). We compare the two versions – DiCFS-hp and DiCFS-vp, respectively – and also compare them with a baseline, represented by the classical non-distributed implementation of CFS in WEKA [@Hall2009a]. Finally, their benefits in terms of reduced execution time are compared with those of the CFS version developed by Eiras-Fanco et al. [@Eiras-Franco2016] for regression problems. The results show that the time-efficiency and scalability of our two versions are an improvement on those of the original version of the CFS; furthermore, similar or improved execution times are obtained with respect to the Eiras-Franco et al [@Eiras-Franco2016] regression version. In the interest of reproducibility, our software and sources are available as a Spark package[^1] called DiCFS, with a corresponding mirror in Github.[^2]
The rest of this paper is organized as follows. Section \[sec:stateofart\] summarizes the most important contributions in the area of distributed and parallel FS and proposes a classification according to how parallelization is carried out. Section \[sec:cFS\] describes the original CFS algorithm, including its theoretical foundations. Section \[sec:spark\] presents the main aspects of the Apache Spark computing framework, focusing on those relevant to the design and implementation of our proposed algorithms. Section \[sec:diCFS\] describes and discusses our DiCFS-hp and DiCFS-vp versions of the CFS algorithm. Section \[sec:experiments\] describes our experiments to compare results for DiCFS-hp and DiCFS-vp, the WEKA approach and the Eiras-Fanco et al. [@Eiras-Franco2016] approach. Finally, conclusions and future work are outlined in Section \[sec:conclusions\].
Background and Related Work {#sec:stateofart}
===========================
As might be expected, filter-based FS algorithms have asymptotic complexities that depend on the number of features and/or instances in a dataset. Many algorithms, such as the CFS, have quadratic complexities, while the most frequently used algorithms have at least linear complexities [@Bolon-Canedo2015b]. This is why, in recent years, many attempts have been made to achieve more scalable FS methods. In what follows, we analyse recent work on the design of new scalable FS methods according to parallelization approaches: (i) search-oriented, (ii) dataset-split-oriented, or (iii) filter-oriented.
*Search-oriented* parallelizations account for most approaches, in that the main aspects to be parallelized are (i) the search guided by a classifier and (ii) the corresponding evaluation of the resulting models. We classify the following studies in this category:
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: |
The aim of this paper is to numerically solve a diffusion differential problem having time derivative of fractional order. To this end we propose a collocation-Galerkin method that uses the fractional splines as approximating functions. The main advantage is in that the derivatives of integer and fractional order of the fractional splines can be expressed in a closed form that involves just the generalized finite difference operator. This allows us to construct an accurate and efficient numerical method. Several numerical tests showing the effectiveness of the proposed method are presented.\
[**Keywords**]{}: Fractional diffusion problem, Collocation method, Galerkin method, Fractional spline
author:
- 'Laura Pezza[^1], Francesca Pitolli[^2]'
title: 'A fractional spline collocation-Galerkin method for the time-fractional diffusion equation'
---
Introduction. {#sec:intro}
=============
The use of fractional calculus to describe real-world phenomena is becoming increasingly widespread. Integro-differential equations of [*fractional*]{}, [*i.e.*]{} positive real, order are used, for instance, to model wave propagation in porous materials, diffusive phenomena in biological tissue, viscoelastic properties of continuous media [@Hi00; @Ma10; @KST06; @Ta10]. Among the various fields in which fractional models are successfully used, viscoelasticity is one of the more interesting since the memory effect introduced by the time-fractional derivative allows to model anomalous diffusion phenomena in materials that have mechanical properties in between pure elasticity and pure viscosity [@Ma10]. Even if these models are empirical, nevertheless they are shown to be consistent with experimental data.\
The increased interest in fractional models has led to the development of several numerical methods to solve fractional integro-differential equations. Many of the proposed methods generalize to the fractional case numerical methods commonly used for the classical integer case (see, for instance, [@Ba12; @PD14; @ZK14] and references therein). But the nonlocality of the fractional derivative raises the challenge of obtaining numerical solution with high accuracy at a low computational cost. In [@PP16] we proposed a collocation method especially designed for solving differential equations of fractional order in time. The key ingredient of the method is the use of the fractional splines introduced in [@UB00] as approximating functions. Thus, the method takes advantage of the explicit differentiation rule for fractional B-splines that allows us to evaluate accurately the derivatives of both integer and fractional order.\
In the present paper we used the method to solve a diffusion problem having time derivative of fractional order and show that the method is efficient and accurate. More precisely, the [*fractional spline collocation-Galerkin method*]{} here proposed combines the fractional spline collocation method introduced in [@PP16] for the time discretization and a classical spline Galerkin method in space.\
The paper is organized as follows. In Section \[sec:diffeq\], a time-fractional diffusion problem is presented and the definition of fractional derivative is given. Section \[sec:fractBspline\] is devoted to the fractional B-splines and the explicit expression of their fractional derivative is given. The fractional spline approximating space is described in Section \[sec:app\_spaces\], while the fractional spline collocation-Galerkin method is introduced in Section \[sec:Galerkin\]. Finally, in Section \[sec:numtest\] some numerical tests showing the performance of the method are displayed. Some conclusions are drawn in Section \[sec:concl\].
A time-fractional diffusion problem. {#sec:diffeq}
====================================
We consider the [*time-fractional differential diffusion problem*]{} [@Ma10] $$\label{eq:fracdiffeq}
\left \{ \begin{array}{lcc}
\displaystyle D_t^\gamma \, u(t, x) - \frac{\partial^2}{\partial x^2} \, u(t, x) = f(t, x)\,, & \quad t \in [0, T]\,, & \quad x \in [0,1] \,,\\ \\
u(0, x) = 0\,, & & \quad x \in [0,1]\,, \\ \\
u(t, 0) = u(t, 1) = 0\,, & \quad t \in [0, T]\,,
\end{array} \right.$$ where $ D_t^\gamma u$, $0 < \gamma < 1$, denotes the [*partial fractional derivative*]{} with respect to the time $t$. Usually, in viscoelasticity the fractional derivative is to be understood in the Caputo sense, [*i.e.*]{} $$\label{eq:Capfrac}
D_t^\gamma \, u(t, x) = \frac1{\Gamma(1-\gamma)} \, \int_0^t \, \frac{u_t(\tau,x)}{(t - \tau)^\gamma} \, d\tau\,, \qquad t\ge 0\,,$$ where $\Gamma$ is the Euler’s gamma function $$\Gamma(\gamma+1)= \int_0^\infty \, s^\gamma \, {\rm e}^{-s} \, ds\,.$$ We notice that due to the homogeneous initial condition for the function $u(t,x)$, solution of the differential problem (\[eq:fracdiffeq\]), the Caputo definition (\[eq:Capfrac\]) coincides with the Riemann-Liouville definition (see [@Po99] for details). One of the advantage of the Riemann-Liouville definition is in that the usual differentiation operator in the Fourier domain can be easily extended to the fractional case, [*i.e.*]{} $${\cal F} \bigl(D_t^\gamma \, f(t) \bigr) = (i\omega)^\gamma {\cal F} (f(t))\,,$$ where ${\cal F}(f)$ denotes the Fourier transform of the function $f(t)$. Thus, analytical Fourier methods usually used in the classical integer case can be extended to the fractional case [@Ma10].
The fractional B-splines and their fractional derivatives. {#sec:fractBspline}
==========================================================
The [*fractional B-splines*]{}, [*i.e.*]{} the B-splines of fractional degree, were introduced in [@UB00] generalizing to the fractional power the classical definition for the polynomial B-splines of integer degree. Thus, the fractional B-spline $B_{\alpha}$ of degree $\alpha$ is defined as $$\label{eq:Balpha}
B_{\alpha}(t) := \frac{{ \Delta}^{\alpha+1} \, t_+^\alpha} {\Gamma(\alpha+1)}\,, \qquad \alpha > -\frac 12\,,$$ where $$\label{eq:fracttruncpow}
t_+^\alpha: = \left \{ \begin{array}{ll}
t^\alpha\,, & \qquad t \ge 0\,, \\ \\
0\,, & \qquad \hbox{otherwise}\,,
\end{array} \right. \qquad \alpha > -1/2\,,$$ is the [*fractional truncated power function*]{}. $\Delta^{\alpha}$ is the [*generalized finite difference operator*]{} $$\label{eq:fracfinitediff}
\Delta^{\alpha} \, f(t) := \sum_{k\in \NN} \, (-1)^k \, {\alpha \choose k} \, f(t-\,k)\,,
\qquad \alpha \in \RR^+\,,$$ where $$\label{eq:binomfrac}
{\alpha \choose k} := \frac{\Gamma(\alpha+1)}{k!\, \Gamma(\alpha-k+1)}\,, \qquad k\in \NN\,, \quad \alpha \in \RR^+\,,$$ are the [*generalized binomial coefficients*]{}. We notice that ’fractional’ actually means ’noninteger’, [*i.e.*]{} $\alpha$ can assume any real value greater than $-1/2$. For real values of $\alpha$, $B_\alpha$ does not have compact support even if it belongs to $L_2(\RR)$. When $\alpha=n$ is a nonnegative integer, Equations (\[eq:Balpha\])-(\[eq:binomfrac\]) are still valid; $\Delta^{n}$ is the usual finite difference operator so that $B_n$ is the classical polynomial B-spline of degree $n$ and compact support $[0,n+1]$ (for details on polynomial B-splines see, for instance, the monograph [@Sc07]).
The fractional B-splines for different values of the parameter $\alpha$ are displayed in Figure \[fig:fractBsplines\] (top left panel). The classical polynomial B-splines are also displayed (dashed lines). The picture shows that the fractional B-splines decay very fast toward infinity so that they can be assumed compactly supported for computational purposes. Moreover, in contrast to the polynomial B-splines, fractional splines are not always positive even if the nonnegative part becomes more and more smaller as $\alpha$ increases.
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
![Top left panel: The fractional B-splines (solid lines) and the polynomial B-splines (dashed lines) for $\alpha$ ranging from 0 to 4. Top right panel: The fractional derivatives of the linear B-spline $B_1$ for $\gamma = 0.25, 0.5, 0.75$. Bottom left panel: The fractional derivatives of the cubic B-spline $B
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: 'Unprecedentedly precise cosmic microwave background (CMB) data are expected from ongoing and near-future CMB Stage-III and IV surveys, which will yield reconstructed CMB lensing maps with effective resolution approaching several arcminutes. The small-scale CMB lensing fluctuations receive non-negligible contributions from nonlinear structure in the late-time density field. These fluctuations are not fully characterized by traditional two-point statistics, such as the power spectrum. Here, we use $N$-body ray-tracing simulations of CMB lensing maps to examine two higher-order statistics: the lensing convergence one-point probability distribution function (PDF) and peak counts. We show that these statistics contain significant information not captured by the two-point function, and provide specific forecasts for the ongoing Stage-III Advanced Atacama Cosmology Telescope (AdvACT) experiment. Considering only the temperature-based reconstruction estimator, we forecast 9$\sigma$ (PDF) and 6$\sigma$ (peaks) detections of these statistics with AdvACT. Our simulation pipeline fully accounts for the non-Gaussianity of the lensing reconstruction noise, which is significant and cannot be neglected. Combining the power spectrum, PDF, and peak counts for AdvACT will tighten cosmological constraints in the $\Omega_m$-$\sigma_8$ plane by $\approx 30\%$, compared to using the power spectrum alone.'
author:
- 'Jia Liu$^{1,2}$'
- 'J. Colin Hill$^{2}$'
- 'Blake D. Sherwin$^{3}$'
- 'Andrea Petri$^{4}$'
- 'Vanessa Böhm$^{5}$'
- 'Zoltán Haiman$^{2,6}$'
bibliography:
- 'paper.bib'
title: 'CMB Lensing Beyond the Power Spectrum: Cosmological Constraints from the One-Point PDF and Peak Counts'
---
Introduction {#sec:intro}
============
After its first detection in cross-correlation nearly a decade ago [@Smith2007; @Hirata2008] and subsequent detection in auto-correlation five years ago [@das2011; @sherwin2011], weak gravitational lensing of the cosmic microwave background (CMB) is now reaching maturity as a cosmological probe [@Hanson2013; @Das2013; @PolarBear2014a; @PolarBear2014b; @BICEPKeck2016; @Story2014; @Ade2014; @vanEngelen2014; @vanEngelen2015; @planck2015xv]. On their way to the Earth, CMB photons emitted at redshift $z=1100$ are deflected by the intervening matter, producing new correlations in maps of CMB temperature and polarization anisotropies. Estimators based on these correlations can be applied to the observed anisotropy maps to reconstruct a noisy estimate of the CMB lensing potential [@Zaldarriaga1998; @Zaldarriaga1999; @HuOkamoto2002; @Okamoto2003]. CMB lensing can probe fundamental physical quantities, such as the dark energy equation of state and neutrino masses, through its sensitivity to the geometry of the universe and the growth of structure (see Refs. [@Lewis2006; @Hanson2010] for a review).
In this paper, we study the non-Gaussian information stored in CMB lensing observations. The Gaussian approximation to the density field breaks down due to nonlinear evolution on small scales at late times. Thus, non-Gaussian statistics (i.e., statistics beyond the power spectrum) are necessary to capture the full information in the density field. Such work has been previously performed (theoretically and observationally) on weak gravitational lensing of galaxies, where galaxy shapes, instead of CMB temperature/polarization patterns, are distorted (hereafter “galaxy lensing”). Several research groups have found independently that non-Gaussian statistics can tighten cosmological constraints when they are combined with the two-point correlation function or angular power spectrum.[^1] Such non-Gaussian statistics have also been applied in the CMB context to the Sunyaev-Zel’dovich signal, including higher-order moments [@Wilson2012; @Hill2013; @Planck2013tSZ; @Planck2015tSZ], the bispectrum [@Bhattacharya2012; @Crawford2014; @Planck2013tSZ; @Planck2015tSZ], and the one-point probability distribution function (PDF) [@Hill2014b; @Planck2013tSZ; @Planck2015tSZ]. In all cases, substantial non-Gaussian information was found, yielding improved cosmological constraints.
The motivation to study non-Gaussian statistics of CMB lensing maps is three-fold. First, the CMB lensing kernel is sensitive to structures at high redshift ($z\approx2.0$, compared to $z\approx0.4$ for typical galaxy lensing samples); hence CMB lensing non-Gaussian statistics probe early nonlinearity that is beyond the reach of galaxy surveys. Second, CMB lensing does not suffer from some challenging systematics that are relevant to galaxy lensing, including intrinsic alignments of galaxies, photometric redshift uncertainties, and shape measurement biases. Therefore, a combined analysis of galaxy lensing and CMB lensing will be useful to build a tomographic outlook on nonlinear structure evolution, as well as to calibrate systematics in both galaxy and CMB lensing surveys [@Liu2016; @Baxter2016; @Schaan2016; @Singh2016; @Nicola2016]. Finally, CMB lensing measurements have recently entered a regime of sufficient sensitivity and resolution to detect the (stacked) lensing signals of halos [@Madhavacheril2014; @Baxter2016; @Planck2015cluster]. This suggests that statistics sensitive to the nonlinear growth of structure, i.e., non-Gaussian statistics, will also soon be detectable. We demonstrate below that this is indeed the case, taking as a reference experiment the ongoing Advanced Atacama Cosmology Telescope (AdvACT) survey [@Henderson2016].
Non-Gaussian aspects of the CMB lensing field have recently attracted attention, both as a potential signal and a source of bias in CMB lensing power spectrum estimates. Considering the lensing non-Gaussianity as a signal, a recent analytical study of the CMB lensing bispectrum by Ref. [@Namikawa2016] forecasted its detectability to be 40$\sigma$ with a CMB Stage-IV experiment. Ref. [@Bohm2016] performed the first calculation of the bias induced in CMB lensing power spectrum estimates by the lensing bispectrum, finding non-negligible biases for Stage-III and IV CMB experiments. Refs. [@Pratten2016] and [@Marozzi2016] considered CMB lensing effects arising from the breakdown of the Born approximation, with the former study finding that post-Born terms substantially alter the predicted CMB lensing bispectrum, compared to the contributions from nonlinear structure formation alone. We emphasize that the $N$-body ray-tracing simulations used in this work naturally capture such effects — we do not use the Born approximation. However, we consider only the lensing potential $\phi$ or convergence $\kappa$ here (related by $\kappa = -\nabla^2 \phi/2$), leaving a treatment of the curl potential or image rotation for future work (Ref. [@Pratten2016] has demonstrated that the curl potential possesses non-trivial higher-order statistics). In a follow-up paper, the simulations described here are used to more precisely characterize CMB lensing power spectrum biases arising from the bispectrum and higher-order correlations [@Sherwin2016].
We consider the non-Gaussianity in the CMB lensing field as a potential signal. We use a suite of 46 $N$-body ray-tracing simulations to investigate two non-Gaussian statistics applied to CMB lensing convergence maps — the one-point PDF and peak counts. We examine the deviation of the convergence PDF and peak counts from those of Gaussian random fields. We then quantify the power of these statistics to constrain cosmological models, compared with using the power spectrum alone.
The paper is structured as follows. We first introduce CMB lensing in Sec. \[sec:formalism\]. We then describe our simulation pipeline in Sec. \[sec:sim\] and analysis procedures in Sec. \[sec:analysis\]. We show our results for the power spectrum, PDF, peak counts, and the derived cosmological constraints in Sec. \[sec:results\]. We conclude in Sec. \[sec:conclude\].
CMB lensing formalism {#sec:formalism}
=====================
To lowest order, the lensing convergence ($\kappa$) is a weighted projection of the three-dimensional matter overdensity $\delta=\delta\rho/\bar{\rho}$ along the line of sight,
$$\label{eq.kappadef}
\kappa(\thetaB) = \int_0^{\infty} dz W(z) \delta(\chi(z)\thetaB, z),$$
where $\chi(z)$ is the comoving distance and the kernel $W(z)$ indicates the lensing strength at redshift $z$ for sources with a redshift distribution $p(z_s)=dn(z_s)/dz$. For CMB lensing, there is only one source plane at the last scattering surface $z_\star=1100$; therefore, $p(z_s)=\delta_D(z_s-z_\star)$, where $\delta_D$ is the Dirac delta function. For a flat universe, the CMB lensing kernel is
$$\begin{aligned}
W^{{\kappa_{\rm cmb}}}(z) &=& \frac{3}{2}\Omega_{m}H
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: 'We continue our study of Cartan schemes and their Weyl groupoids. The results in this paper provide an algorithm to determine connected simply connected Cartan schemes of rank three, where the real roots form a finite irreducible root system. The algorithm terminates: Up to equivalence there are exactly 55 such Cartan schemes, and the number of corresponding real roots varies between $6$ and $37$. We identify those Weyl groupoids which appear in the classification of Nichols algebras of diagonal type.'
address:
- 'Michael Cuntz, Fachbereich Mathematik, Universität Kaiserslautern, Postfach 3049, D-67653 Kaiserslautern, Germany'
- 'István Heckenberger, Philipps-Universität Marburg, Fachbereich Mathematik und Informatik, Hans-Meerwein-Straße, D-35032 Marburg, Germany'
author:
- 'M. Cuntz'
- 'I. Heckenberger'
bibliography:
- 'quantum.bib'
title: Finite Weyl groupoids of rank three
---
Introduction
============
Root systems associated with Cartan matrices are widely studied structures in many areas of mathematics, see [@b-BourLie4-6] for the fundaments. The origins of the theory of root systems go back at least to the study of Lie groups by Lie, Killing and Cartan. The symmetry of the root system is commonly known as its Weyl group. Root systems associated with a family of Cartan matrices appeared first in connection with Lie superalgebras [@a-Kac77 Prop.2.5.6] and with Nichols algebras [@a-Heck06a], [@a-Heck08a]. The corresponding symmetry is not a group but a groupoid, and is called the Weyl groupoid of the root system.
Weyl groupoids of root systems properly generalize Weyl groups. The nice properties of this more general structure have been the main motivation to develop an axiomatic approach to the theory, see [@a-HeckYam08], [@a-CH09a]. In particular, Weyl groupoids are generated by reflections and Coxeter relations, and they satisfy a Matsumoto type theorem [@a-HeckYam08]. To see more clearly the extent of generality it would be desirable to have a classification of finite Weyl groupoids.[^1] However, already the appearance of a large family of examples of Lie superalgebras and Nichols algebras of diagonal type indicated that a classification of finite Weyl groupoids is probably much more complicated than the classification of finite Weyl groups. Additionally, many of the usual classification tools are not available in this context because of the lack of the adjoint action and a positive definite bilinear form.
In previous work, see [@a-CH09b] and [@p-CH09a], we have been able to determine all finite Weyl groupoids of rank two. The result of this classification is surprisingly nice: We found a close relationship to the theory of continued fractions and to cluster algebras of type $A$. The structure of finite rank two Weyl groupoids and the associated root systems has a natural characterization in terms of triangulations of convex polygons by non-intersecting diagonals. In particular, there are infinitely many such groupoids.
At first view there is no reason to assume that the situation for finite Weyl groupoids of rank three would be much different from the rank two case. In this paper we give some theoretical indications which strengthen the opposite point of view. For example in Theorem \[cartan\_6\] we show that the entries of the Cartan matrices in a finite Weyl groupoid cannot be smaller than $-7$. Recall that for Weyl groupoids there is no lower bound for the possible entries of generalized Cartan matrices. Our main achievement in this paper is to provide an algorithm to classify finite Weyl groupoids of rank three. Our algorithm terminates within a short time, and produces a finite list of examples. In the appendix we list the root systems characterizing the Weyl groupoids of the classification: There are $55$ of them which correspond to pairwise non-isomorphic Weyl groupoids. The number of positive roots in these root systems varies between $6$ and $37$. Among our root systems are the usual root systems of type $A_3$, $B_3$, and $C_3$, but for most of the other examples we don’t have yet an explanation.
It is remarkable that the number $37$ has a particular meaning for simplicial arrangements in the real projective plane. An arrangement is the complex generated by a family of straight lines not forming a pencil. The vertices of the complex are the intersection points of the lines, the edges are the segments of the lines between two vertices, and the faces are the connected components of the complement of the set of lines generating the arrangement. An arrangement is called simplicial, if all faces are triangles. Simplicial arrangements have been introduced in [@a-Melchi41]. The classification of simplicial arrangements in the real projective plane is an open problem. The largest known exceptional example is generated by $37$ lines. Grünbaum conjectures that the list given in [@a-Gruenb09] is complete. In our appendix we provide some data of our root systems which can be used to compare Grünbaum’s list with Weyl groupoids. There is an astonishing analogy between the two lists, but more work has to be done to be able to explain the precise relationship. This would be desirable in particular since our classification of finite Weyl groupoids of rank three does not give any evidence for the range of solutions besides the explicit computer calculation.
In order to ensure the termination of our algorithm, besides Theorem \[cartan\_6\] we use a weak convexity property of certain affine hyperplanes, see Theorem \[convex\_diff2\]: We can show that any positive root in an affine hyperplane “next to the origin” is either simple or can can be written as the sum of a simple root and another positive root. Our algorithm finally becomes practicable by the use of Proposition \[pr:suminR\], which can be interpreted as another weak convexity property for affine hyperplanes. It is hard to say which of these theorems are the most valuable because avoiding any of them makes the algorithm impracticable (unless one has some replacement).
The paper is organized as follows. We start with two sections proving the necessary theorems to formulate the algorithm: The results which do not require that the rank is three are in Section \[gen\_res\], the obstructions for rank three in Section \[rk3\_obst\]. We then describe the algorithm in the next section. Finally we summarize the resulting data and make some observations in the last section.
**Acknowledgement.** We would like to thank B. M[ü]{}hlherr for pointing out to us the importance of the number $37$ for simplicial arrangements in the real projective plane.
Cartan schemes and Weyl groupoids {#gen_res}
=================================
We mainly follow the notation in [@a-CH09a; @a-CH09b]. The fundaments of the general theory have been developed in [@a-HeckYam08] using a somewhat different terminology. Let us start by recalling the main definitions.
Let $I$ be a non-empty finite set and $\{{\alpha }_i\,|\,i\in I\}$ the standard basis of ${\mathbb{Z}}^I$. By [@b-Kac90 §1.1] a generalized Cartan matrix ${C}=({c}_{ij})_{i,j\in I}$ is a matrix in ${\mathbb{Z}}^{I\times I}$ such that
1. ${c}_{ii}=2$ and ${c}_{jk}\le 0$ for all $i,j,k\in I$ with $j\not=k$,
2. if $i,j\in I$ and ${c}_{ij}=0$, then ${c}_{ji}=0$.
Let $A$ be a non-empty set, ${\rho }_i : A \to A$ a map for all $i\in I$, and ${C}^a=({c}^a_{jk})_{j,k \in I}$ a generalized Cartan matrix in ${\mathbb{Z}}^{I \times I}$ for all $a\in A$. The quadruple $${\mathcal{C}}= {\mathcal{C}}(I,A,({\rho }_i)_{i \in I}, ({C}^a)_{a \in A})$$ is called a *Cartan scheme* if
1. ${\rho }_i^2 = \id$ for all $i \in I$,
2. ${c}^a_{ij} = {c}^{{\rho }_i(a)}_{ij}$ for all $a\in A$ and $i,j\in I$.
Let ${\mathcal{C}}= {\mathcal{C}}(I,A,({\rho }_i)_{i \in I}, ({C}^a)_{a \in A})$ be a Cartan scheme. For all $i \in I$ and $a \in A$ define ${\sigma }_i^a \in
\operatorname{Aut}({\mathbb{Z}}^I)$ by $$\begin{aligned}
{\sigma }_i^a ({\alpha }_j) = {\alpha }_j - {c}_{ij}^a {\alpha }_i \qquad
\text{for all $j \in I$.}
\label{eq:sia}
\end{aligned}$$ The *Weyl groupoid of* ${\mathcal{C}}$ is the category ${\mathcal{W}}({\mathcal{C}})$ such that
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: 'Let $(R,{\mathfrak{m}})$ be a complete Noetherian local ring and let $M$ be a finite $R$–module of positive Krull dimension $n$. It is shown that any subset $T$ of ${\mbox{Assh}\,}_R(M)$ can be expressed as the set of attached primes of the top local cohomology module ${\mbox{H}\, }^n_{\mathfrak{a}}(M)$ for some ideal ${\mathfrak{a}}$ of $R$. Moreover if ${\mathfrak{a}}$ is an ideal of $R$ such that the set of attached primes of ${\mbox{H}\, }^n_{\mathfrak{a}}(M)$ is a non–empty proper subset of ${\mbox{Assh}\,}_R(M)$, then ${\mbox{H}\, }^n_{\mathfrak{a}}(M)\cong{\mbox{H}\, }^n_{\mathfrak{b}}(M)$ for some ideal ${\mathfrak{b}}$ of $R$ with ${\mbox{dim}\,}_R (R/{\mathfrak{b}})=1$.'
address:
- |
Mohammad T. Dibaei\
Faculty of Mathematical Sciences, Teacher Training University, Tehran, Iran, and Institute for Theoretical Physics and Mathematics (IPM), Tehran, Iran.
- |
Raheleh Jafari\
Faculty of Mathematical Sciences, Teacher Training University, Tehran, Iran
author:
- 'Mohammad T. Dibaei'
- Raheleh Jafari
title: |
Top local cohomology modules\
with specified attached primes
---
Introduction
============
Throughout $(R,{\mathfrak{m}})$ is a commutative Noetherian local ring with maximal ideal ${\mathfrak{m}}$, $M$ is a non-zero finite (i.e. finitely generated) $R$–module with positive Krull dimension $n:={\mbox{dim}\,}_R(M)$ and ${\mathfrak{a}}$ denotes an ideal of $R$. Recall that for an $R$–module $N$, a prime ideal ${\mathfrak{p}}$ of $R$ is said to be an [*attached prime*]{} of $N$, if ${\mathfrak{p}}={\mbox{Ann}\,}_R(N/K)$ for some submodule $K$ of $N$ (see [@MS]). The set of attached primes of $N$ is denoted by ${\mbox{Att}\,}_R(N)$. If $N$ is an Artinian $R$–module so that $N$ admits a reduced secondary representation $N=N_1+\cdots+N_r$ such that $N_i$ is ${\mathfrak{p}}_i$–secondary, $i=1,\ldots,r$, then ${\mbox{Att}\,}_R(N)=\{{\mathfrak{p}}_1,\ldots,{\mathfrak{p}}_r\}$ is a finite set.
Denote by ${\mbox{H}\, }^n_{\mathfrak{a}}(M)$ the $n$th right derived functor of $$\Gamma_{\mathfrak{a}}(M)=\{x\in M|\, {\mathfrak{a}}^rx=0 \ \mbox{for some positive
integer} \ r \}$$ applied to $M$. It is well-known that ${\mbox{H}\, }^n_{\mathfrak{a}}(M)$ is an Artinian module. Macdonald and Sharp, in [@MS], studied ${\mbox{H}\, }^n_{\mathfrak{m}}(M)$ and showed that ${\mbox{Att}\,}_R({\mbox{H}\, }^n_{\mathfrak{m}}(M))= {\mbox{Assh}\,}_R(M)$ where ${\mbox{Assh}\,}_R(M):=\{{\mathfrak{p}}\in
{\mbox{Ass}\,}_R(M)|\, {\mbox{dim}\,}_R(R/{\mathfrak{p}})=n\}$. It is shown in [@DY1 Theorem A], that for any arbitrary ideal ${\mathfrak{a}}$ of $R$, ${\mbox{Att}\,}_R({\mbox{H}\, }^n_{\mathfrak{a}}(M))=\{{\mathfrak{p}}\in{\mbox{Ass}\,}_R(M)|\, {\mbox{H}\, }^n_{\mathfrak{a}}(R/{\mathfrak{p}})\neq 0\}$ which is a subset of ${\mbox{Assh}\,}_R(M)$. In [@DY2], the structure of ${\mbox{H}\, }^n_{\mathfrak{a}}(M)$ is studied by the first author and Yassemi and they showed that, in case $R$ is complete, for any pair of ideals ${\mathfrak{a}}$ and ${\mathfrak{b}}$ of $R$, if ${\mbox{Att}\,}_R({\mbox{H}\, }^n_{\mathfrak{a}}(M))={\mbox{Att}\,}_R({\mbox{H}\, }^n_{\mathfrak{b}}(M))$, then ${\mbox{H}\, }^n_{\mathfrak{a}}(M) \cong {\mbox{H}\, }^n_{\mathfrak{b}}(M)$. They also raised the following question in [@DY3 Question 2.9] which is the main object of this paper.
[**Question.**]{} For any subset $T$ of ${\mbox{Assh}\,}_R(M)$, is there an ideal ${\mathfrak{a}}$ of $R$ such that ${\mbox{Att}\,}_R({\mbox{H}\, }^n_{\mathfrak{a}}(M)) = T$?
This paper provides a positive answer for this question in the case $R$ is complete.
Main Result
===========
In this section we assume that $R$ is complete with respect to the ${\mathfrak{m}}$–adic topology. As mentioned above, ${\mbox{Att}\,}_R({\mbox{H}\, }^n_{\mathfrak{m}}(M)) =
{\mbox{Assh}\,}_R(M)$ and ${\mbox{Att}\,}_R({\mbox{H}\, }^n_R(M)) = \emptyset$ is the empty set. Also ${\mbox{Att}\,}_R({\mbox{H}\, }^n_{\mathfrak{a}}(M)) \subseteq {\mbox{Assh}\,}_R(M)$ for all ideals ${\mathfrak{a}}$ of $R$. Our aim is to show that as ${\mathfrak{a}}$ varies over ideals of $R$, the set ${\mbox{Att}\,}_R({\mbox{H}\, }^n_{\mathfrak{a}}(M))$ takes all possible subsets of ${\mbox{Assh}\,}_R(M)$ (see Theorem 2.8). In the following results we always assume that $T$ is a non–empty proper subset of ${\mbox{Assh}\,}_R(M)$
In our first result we find a characterization for a subset of ${\mbox{Assh}\,}_R (M)$ to be the set of attached primes of the top local cohomology of $M$ with respect to an ideal ${\mathfrak{a}}$.
Assume that $n:={\mbox{dim}\,}_R(M)\geq 1$ and that $T$ is a proper non-empty subset of ${\mbox{Assh}\,}_R(M)$. Set ${\mbox{Assh}\,}_R(M)\setminus
T=\{{\mathfrak{q}}_1,\ldots,{\mathfrak{q}}_r\}$. The following statements are equivalent.
1. There exists an ideal ${\mathfrak{a}}$ of $R$ such that ${\mbox{Att}\,}_R({\mbox{H}\, }^n_{\mathfrak{a}}(M))=T$.
2. For each $i,\,1\leq i\leq r$, there exists $Q_i\in {\mbox{Supp}\,}_R(M)$ with ${\mbox{dim}\,}_R(R/Q_i)=1$ such that $$\underset{{\mathfrak{p}}\in T}{\bigcap}{\mathfrak{p}}\nsubseteq Q_i \quad \mbox{and}
\quad {\mathfrak{q}}_i\subseteq Q_i.$$
With $Q_i,\, 1\leq i\leq r$, as above, ${\mbox{Att}\,}_R({\mbox{H}\, }^n_{\mathfrak{a}}(M))=T$ where ${\mathfrak{a}}=\bigcap\limits_{i=1}^rQ_i$.
$(i)\Rightarrow (ii)$. By [@DY1 Theorem A], ${\mbox{H}\, }^n_{\mathfrak{a}}(R/{\mathfrak{p}})\neq 0$ for all ${\mathfrak{p}}\in T$, that is ${\mathfrak{a}}+{\mathfrak{p}}$ is ${\mathfrak{m}}$–primary for all ${\mathfrak{p}}\in T$ (by [Lichtenbaum-Hartshorne Theorem]{}). On the other hand, for $1\leq i\leq r, {\mathfrak{q}}_i\notin T$ which is equivalent to say that ${\mathfrak{a}}+{\mathfrak{q}}_i$ is not an ${\mathfrak{m}}$–primary ideal. Hence there exists a prime ideal $Q_i\in {\mbox{Supp}\,}_R(M)$ such that ${\mbox{dim}\,}_R(R/Q_i)=1$ and ${\mathfrak{a}}+{\mathfrak{q}}_i\subseteq Q_i$. It follows that $\underset{{\mathfrak{p}}\in
T}{\bigcap}{\mathfrak{p}}\nsubseteq Q_i$.\
$(ii)\Rightarrow (i)$. Set ${\mathfrak{a}}:=\bigcap\limits_{i=1}^rQ_i$. For each $i, 1\leq i\leq r$, ${\mathfrak{a}}+{\mathfrak{q}}_i\subseteq Q_
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: 'Noisy measurements of a physical unclonable function (PUF) are used to store secret keys with reliability, security, privacy, and complexity constraints. A new set of low-complexity and orthogonal transforms with no multiplication is proposed to obtain bit-error probability results significantly better than all methods previously proposed for key binding with PUFs. The uniqueness and security performance of a transform selected from the proposed set is shown to be close to optimal. An error-correction code with a low-complexity decoder and a high code rate is shown to provide a block-error probability significantly smaller than provided by previously proposed codes with the same or smaller code rates.'
address: |
Information Theory and Applications Chair, Technische Universität Berlin\
{[guenlue]{}, [rafael.schaefer]{}}[@tu-berlin.de]{}\
bibliography:
- 'references.bib'
title: |
LOW-COMPLEXITY AND RELIABLE TRANSFORMS FOR\
PHYSICAL UNCLONABLE FUNCTIONS
---
physical unclonable function (PUF), no multiplication transforms, secret key agreement, low complexity.
Introduction
============
Biometric identifiers such as fingerprints are useful to authenticate a user. Similarly, secret keys are traditionally stored in non-volatile memories (NVMs) to authenticate a physical device that contains the key. NVMs require hardware protection even when the device is turned off since an attacker can try to obtain the key at any time. A safe and cheap alternative to storing keys in NVMs is to use physical identifiers, e.g., fine variations of ring oscillator (RO) outputs, as a randomness source. Since invasive attacks to physical identifiers permanently change the identifier output, there is no need for continuous hardware protection for physical identifiers [@pufintheory].
Physical unclonable functions (PUFs) are physical identifiers with reliable and high-entropy outputs [@GassendThesis; @PappuThesis]. PUF outputs are unique to each device, so they are used for safe and low-complexity key storage in digital devices. These keys can be used for private authentication, secure computation, and encryption. Replacing such identifiers is expensive, so key-storage methods should limit the information the public data leak about the identifier outputs. Moreover, the same device should be able to reconstruct a secret key generated from the noiseless outputs by using the noisy outputs and public information. The ultimate secret-key vs. privacy-leakage rate tradeoffs are given in [@IgnaTrans; @LaiTrans; @benimdissertation]. The secret-key and privacy-leakage rate limits for a suboptimal chosen-secret (CS) model called *fuzzy commitment scheme* (FCS) [@FuzzyCommitment] are given in [@IgnatenkoFuzzy]. We consider the FCS to compare different post-processing methods applied to PUFs. Asymptotically optimal CS model constructions are given in [@bizimWZ] and similar comparison results can be obtained by using these constructions.
Physical identifier outputs are highly correlated and noisy, which are the two main problems in using PUFs. If errors in the extracted sequences are not corrected, PUF reliability would be low. If correlations are not eliminated, machine learning algorithms can model the PUF outputs [@MLPUF]. To solve the two problems, the discrete cosine transform (DCT) is used in [@bizimtemperature] to generate a uniformly-distributed bit sequence from PUFs under varying environmental conditions. Similarly, the discrete Walsh-Hadamard transform (DWHT), discrete Haar transform (DHT), and Karhunen-Loève transform (KLT) are compared in [@bizimMDPI] in terms of the maximum secret-key length, decorrelation efficiency, reliability, security, and hardware cost. The DCT, DWHT, and DHT provide good reliability and security results, and a hardware implementation of the DWHT in [@bizimMDPI] shows that the DWHT requires a substantially smaller hardware area than other transforms. There are two main reasons why the DWHT can be implemented efficiently. Firstly, the matrix that represents the DWHT has elements $1$ or $-1$, so there is no matrix multiplication. Secondly, an input-selection algorithm that is an extension of the algorithm in [@InputSelection] allows to calculate two-dimensional (2D) DWHT recursively. Based on these observations, we propose a new set of transforms that preserve these properties and that significantly improve the reliability of the sequences extracted from PUFs.
The FCS requires error-correction codes (ECCs) to achieve the realistic block-error probability of $\displaystyle P_\text{B}\!=\!10^{-9}$ for RO PUFs. The ECCs proposed in [@bizimMDPI] have better secret-key and privacy-leakage rates than previously proposed codes, but in some cases it is assumed that if multiple bits are extracted from each transform coefficient, each bit is affected by independent errors. This assumption is not valid in general. Thus, we extract only one bit from each transform coefficient. The contributions of this work are as follows.
- We propose a new set of 2D orthogonal transforms that have low-complexity hardware implementations and no matrix multiplications. The new set of transforms are shown to provide an average bit-error probability smaller than the most reliable transform considered in the PUF literature, i.e., DCT.
- Bit sequences extracted using a transform selected from the new set of transforms are shown to give good uniqueness and security results that are comparable to state-of-the-art results.
- We propose a joint transform-quantizer-code design method for the new set of transforms in combination with the FCS to achieve a block-error probability substantially smaller than the common value of $10^{-9}$ with perfect secrecy.
This paper is organized as follows. In Section \[sec:fuzzycommitment\], we review the FCS. The transform-coding algorithm to extract secure sequences from RO PUFs is explained in Section \[sec:commonsteps\]. A new set of orthogonal transforms that require a small hardware area and that result in bit-error probabilities smaller than previously considered transforms is proposed in Section \[sec:neworth\]. In Section \[sec:comparisons\], we compare the new transforms with previous methods and show that the proposed ECC provides a block-error probability for the new selected transform (ST) that is smaller than for previously considered transforms.
Review of the Fuzzy Commitment Scheme {#sec:fuzzycommitment}
=====================================
Fig. \[fig:fuzzycommitment\] shows the FCS, where an encoder ${\mathsf{Enc}}(\cdot)$ adds a codeword $\displaystyle C^N$, uniformly distributed over a set with cardinality $|\mathcal{S}|$, modulo-2 to the binary noiseless PUF-output sequence $\displaystyle X^N$ during enrollment. We show in Section \[sec:commonsteps\] that the sequence $X^N$ and its noisy version $Y^N$ can be obtained by applying the post-processing steps in Fig. \[fig:postprocessing\] to RO outputs $\widetilde{X}^L$ and its noisy version $\widetilde{Y}^L$, respectively. The sum $\displaystyle W^N=C^N{\mathbin{\oplus}}X^N$ is publicly sent through a noiseless and authenticated channel, and it is called *helper data*. The modulo-2 sum of $W^N$ and the noisy PUF-output sequence $Y^N =X^N {\mathbin{\oplus}}E^N$, where $E^N$ is the binary error vector, gives the noisy codeword $\displaystyle C^N{\mathbin{\oplus}}E^N$. Using the noisy codeword, a channel decoder $\displaystyle {\mathsf{Dec}}(\cdot)$ estimates the secret key $S$ during reconstruction. A reliable secret-key agreement is possible by using $X^N$, $Y^N$, and $W^N$ [@AhlswedeCsiz; @Maurer].
One can achieve a (secret-key, privacy-leakage) rate pair $ (R_\text{s}\text{,}R_\ell)$ using the FCS with perfect secrecy if, given any $\epsilon\!>\!0$, there is some $N\!\geq\!1$, and an encoder and a decoder for which $\displaystyle R_\text{s}=\frac{\log|\mathcal{S}|}{N}$ and $$\begin{aligned}
{2}
&\Pr[S\ne\hat{S}] \leq \epsilon && (\text{reliability}) \label{eq:reliabilityconst}\\
&I\big(S;W^N\big)\!=\!0 && (\text{perfect secrecy})\label{eq:secrecyconst}\\
&\frac{1}{N}I\big(X^N;W^N\big) \leq R_\ell+\epsilon. \quad\quad\quad&&(\text{privacy}) \label{eq:privacyconst}\end{aligned}$$ Condition (\[eq:secrecyconst\]) ensures that the public side information $W^N$ does not leak any information about the secret key, so one achieves perfect secrecy. The normalized information that $W^N$ leaks about the PUF output sequence $X^N$ is considered in (\[eq:privacyconst\]). If one should asymptotically limit the unnormalized privacy leakage $I(X^N;W^N)$, private keys available during enrollment and reconstruction
|
{
"pile_set_name": "ArXiv"
}
|
---
author:
- '$^{1}$Ryosuke Akashi[^1] and $^{1,2}$Ryotaro Arita'
title: 'Density Functional Theory for Plasmon-assisted Superconductivity'
---
Introduction
============
Superconductivity constitutes one of the most fascinating fields in condensed matter physics ever since its discovery in the early twentieth century. After the success of its description by the Bardeen-Cooper-Schrieffer theory,[@BCS] particular attention has been paid to the material dependence of the superconducting transition temperature ($T_{\rm c}$): that is, why some materials such as the celebrated cuprate[@Bednorz-Muller] exhibit high $T_{\rm c}$ but others do not? Since superconductivity emerges as a result of subtle interplay and competition of interactions between atoms and electrons having much larger energy scales, $T_{\rm c}$ is extremely sensitive to details of the electronic and crystal structure. Thus, an accurate quantitative treatment is essential to understand the emergence of high values of $T_{\rm c}$.
For the conventional phonon-mediated mechanism, quantitative calculations have been performed within the Migdal-Eliashberg (ME) theory[@Migdal-Eliashberg] implemented with the first-principles method based on the Kohn-Sham density functional theory[@Kohn-Sham-eq]: In a variety of systems, phonon properties are well reproduced by the density functional perturbation theory[@Baroni-review] or the total-energy method[@Kunc-Martin-frozen] within the local density approximation[@Ceperley-Alder; @PZ81]. By using the calculated phonon spectrum and electron-phonon coupling as inputs, it has been shown that the ME theory explains the qualitative tendency of $T_{\rm c}$ for various materials[@Savrasov-Savrasov; @Choi-MgB2]. However, the ME formalism is not suitable for full *ab initio* calculations since it is difficult to treat electron-electron interaction nonempirically. When we calculate $T_{\rm c}$ by solving the Eliashberg equation or using related approximate formulae such as the McMillan equation,[@McMillan; @AllenDynes] we vary the value of $\mu^{\ast}$ (Ref. ) representing the effective electron-electron Coulomb interaction which suppresses the Cooper-pair formation, and examine whether the range of the resulting $T_{\rm c}$ covers the experimentally observed value. With such a semi-empirical framework, the material dependence of the electron-electron interaction cannot be understood quantitatively.
The recent progress in the density functional theory for superconductors (SCDFT)[@Oliveira; @Kreibich; @GrossI] has changed the situation. There, a non-empirical scheme describing the physics in the ME theory was formulated: Based on the Kohn-Sham orbital, it treats the weak-to-strong electron-phonon coupling, the screened electron-electron interaction within the static approximation, and the retardation effect[@Morel-Anderson] due to the difference in the energy ranges of these interactions. This scheme has been demonstrated to reproduce experimental $T_{\rm c}$s of various conventional phonon-mediated superconductors with deviation less than a few K.[@GrossII; @Floris-MgB2; @Sanna-CaC6; @Bersier-CaBeSi] More recently, it has been employed to examine the validity of the ME theory in fully gapped superconductors with high $T_{\rm c}$ such as layered nitrides[@Akashi-MNCl] and alkali-doped fullerides.[@Akashi-fullerene] Through these applications, the current SCDFT has proved to be an informative method well-suited to investigate the nontrivial effects of the electron-electron interaction behind superconducting phenomena.
Although the electron-electron interaction just suppresses the pairing in the ME theory, possibilities of superconductivity induced by the electron-electron interaction have long been also explored. Since the discovery of the cuprates,[@Bednorz-Muller] superconductivity induced by short-range Coulomb interaction has been extensively investigated.[@Scalapino-review2012] On the other hand, there has been many proposals of superconducting mechanisms concerning long-range Coulomb interaction since the seminal work of Kohn and Luttinger.[@Kohn-Luttinger] In particular, there is a class of mechanisms that exploit the dynamical structure of the screened Coulomb interaction represented by the frequency-dependent dielectric function $\varepsilon(\omega)$: e.g., the plasmon[@Radhakrishnan1965; @Frohlich1968; @Takada1978; @Rietschel-Sham1983] and exciton[@Little1967] mechanisms. Interestingly, such mechanisms can cooperate with the conventional phonon mechanism. Since they usually favor $s$-wave pairing, they have a chance to enhance $s$-wave superconductivity together with the phonon mechanism. Taking this possibility into account, these mechanisms are important even where they do not alone induce superconductivity. Therefore, they are expected to involve a broader range of systems than originally expected in the early studies. In fact, for a variety of systems having low-energy electronic excitations, theoretical model calculations addressing such a cooperation have been performed: SrTiO$_{3}$ [@Koonce-Cohen1967; @Takada-SrTiO3] with small plasmon frequencies due to small electron densities, $s$-$d$ transition metals [@Garland-sd] where “demon" acoustic plasmons have been discussed,[@Pines-demon; @Ihm-Cohen1981] metals sandwiched by small-gap semiconductors [@Ginzburg-HTSC; @ABB1973], and layered systems where two-dimensional acoustic plasmons are proposed to become relevant [@Kresin1987; @Bill2002-2003]. Moreover, recent experimental discoveries of high-temperature superconductivity in doped band insulators have stimulated more quantitative analyses on effects of the cooperation [@Yamanaka1998; @Bill2002-2003; @Taguchi2006; @Taniguchi2012; @Ye2012].
Considering the above grounds, the situation calls for an *ab initio* theory that treats the phonon-mediated interaction and the dynamical screened Coulomb interaction together, with which one can study from the superconductors governed by phonons or the dynamical Coulomb interaction to those by their cooperation on equal footing. The aim of our present study is to establish this by extending the applicability of SCDFT. In this paper, we review the recent theoretical extension to include the plasmon-induced dynamical screened Coulomb interaction.[@Akashi-plasmon] In Sec. \[sec:theory\], we present the theoretical formulation and its practical implementation, and discuss how plasmons can enhance superconductivity. Section \[sec:appl-Li\] describes the application to elemental lithium under high pressures, for which the plasmon effect is expected to be substantial because of its relatively dilute electron density. In Sec. \[sec:summary\] we summarize our results and give concluding remarks.
Formulation {#sec:theory}
===========
General formalism {#subsec:theory-general}
-----------------
Let us start from a brief review of SCDFT.[@GrossI] The current SCDFT employs the gap equation $$\begin{aligned}
\Delta_{n{\bf k}}\!=\!-\mathcal{Z}_{n\!{\bf k}}\!\Delta_{n\!{\bf k}}
\!-\!\frac{1}{2}\!\sum_{n'\!{\bf k'}}\!\mathcal{K}_{n\!{\bf k}\!n'{\bf k}'}
\!\frac{\mathrm{tanh}[(\!\beta/2\!)\!E_{n'{\bf k'}}\!]}{E_{n'{\bf k'}}}\!\Delta_{n'\!{\bf k'}}
\label{eq:gap-eq}\end{aligned}$$ to obtain $T_{\rm c}$, which is specified as the temperature where the calculated value of gap function $\Delta_{n{\bf k}}$ becomes zero. Here, $n$ and ${\bf k}$ denote the band index and crystal momentum, respectively, $\Delta$ is the gap function, and $\beta$ is the inverse temperature. The energy $E_{n {\bf k}}$ is defined as $E_{n {\bf k}}$=$\sqrt{\xi_{n {\bf k}}^{2}+\Delta_{n {\bf k}}^{2}}$ and $\xi_{n {\bf k}}=\epsilon_{n {\bf k}}-\mu$ is the one-electron energy measured from the chemical potential $\mu$, where $\epsilon_{n {\bf k}}$ is obtained by solving the normal Kohn-Sham equation in density functional theory $
\mathcal{H}_{\rm KS}|\varphi_{n{\bf k}}\rangle=\epsilon_{n{\bf k}}
|\varphi_{n{\bf k}}\rangle
$ with $\mathcal{H}_{\rm KS}$ and $|\varphi_{n{\bf k}}\rangle$ being the Kohn-Sham Hamiltonian and the Kohn-Sham state, respectively. The functions $\mathcal{Z}$ and $\mathcal{K}$, which are called as the exchange-correlation kernels, describe the effects of all the interactions involved: They are defined as the second functional derivative of the free energy with respect to the anomalous electron density. A formulation of the free energy based on the Kohn-Sham perturbation theory\cite{} enables us practical calculations of the exchange-correlation functionals using the Kohn-Sham eigenvalues and eigenfunctions derived from standard *ab initio* methods.
The nondiagonal exchange-correlation kernel $\mathcal{K}$ is composed of two parts $\mathcal{K}$$=$$\mathcal{K}^{\rm ph}$$
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: 'Isotropic Heisenberg exchange naturally appears as the main interaction in magnetism, usually favouring long-range spin-ordered phases. The anisotropic Dzyaloshinskii-Moriya interaction arises from relativistic corrections and is *a priori* much weaker, even though it may sufficiently compete with the isotropic one to yield new spin textures. Here, we challenge this well-established paradigm, and propose to explore a Heisenberg-exchange-free magnetic world. There, the Dzyaloshinskii-Moriya interaction induces magnetic frustration in two dimensions, from which the competition with an external magnetic field results in a new mechanism producing skyrmions of nanoscale size. The isolated nanoskyrmion can already be stabilized in a few-atom cluster, and may then be used as LEGO${\textregistered}$ block to build a large magnetic mosaic. The realization of such topological spin nanotextures in $sp$- and $p$-electron compounds or in ultracold atomic gases would open a new route toward robust and compact magnetic memories.'
author:
- 'E. A. Stepanov$^{1,2}$, S. A. Nikolaev$^{2}$, C. Dutreix$^{3}$, M. I. Katsnelson$^{1,2}$, V. V. Mazurenko$^{2}$'
title: 'Heisenberg-exchange-free nanoskyrmion mosaic'
---
The concept of spin was introduced by G. Uhlenbeck and S. Goudsmit in the 1920s in order to explain the emission spectrum of the hydrogen atom obtained by A. Sommerfeld [@Int2]. W. Heitler and F. London subsequently realized that the covalent bond of the hydrogen molecule involves two electrons of opposite spins, as a result of the fermionic exchange [@Int4]. This finding inspired W. Heisenberg to give an empirical description of ferromagnetism [@Int5; @Int6], before P. Dirac finally proposed a Hamiltonian description in terms of scalar products of spin operators [@Int7]. These pioneering works focused on the ferromagnetic exchange interaction that is realized through the direct overlap of two neighbouring electronic orbitals. Nonetheless, P. Anderson understood that the exchange interaction in transition metal oxides could also rely on an indirect antiferromagnetic coupling via intermediate orbitals [@PhysRev.115.2]. This so-called superexchange interaction, however, could not explain the weak ferromagnetism of some antiferromagnets. The latter has been found to arise from anisotropic interactions of much weaker strength, as addressed by I. Dzyaloshinskii and T. Moriya [@DZYALOSHINSKY1958241; @Moriya]. The competition between the isotropic exchange and anisotropic Dzyaloshinskii-Moriya interactions (DMI) leads to the formation of topologically protected magnetic phases, such as skyrmions [@NagaosaReview]. Nevertheless, the isotropic exchange mainly rules the competition, which only allows the formation of large magnetic structures, more difficult to stabilize and manipulate in experiments [@NagaosaReview; @PhysRevX.4.031045]. Finding a new route toward more compact robust spin textures then appears as a natural challenge.
As a promising direction, we investigate the existence of two-dimensional skyrmions in the absence of isotropic Heisenberg exchange. Indeed, recent theoretical works have revealed that antiferromagnetic superexchange may be compensated by strong ferromagnetic direct exchange interactions at the surfaces of $sp$- and $p$-electron nanostructures [@silicon; @graphene], whose experimental isolation has recently been achieved [@PbSn; @PhysRevLett.98.126401; @SurfMagn; @kashtiban2014atomically]. Moreover, Floquet engineering in such compounds also offers the possibility to dynamically switch off the isotropic Heisenberg exchange interaction under high-frequency-light irradiation, a unique situation that could not be met in transition metal oxides in equilibrium [@PhysRevLett.115.075301; @Control1; @Control2]. In particular, rapidly driving the strongly-correlated electrons may be used to tune the magnetic interactions, which can be described by in terms of spin operators $\hat{\bf S}_i$ by the following Hamiltonian $$\begin{aligned}
H_{\rm spin} = -\sum_{{\ensuremath{\left\langle ij \right\rangle}}} J_{ij} (A) \,\hat{\bf S}_{i}\,\hat{\bf S}_{j} +
\sum_{{\ensuremath{\left\langle ij \right\rangle}}}{\bf D}_{ij} (A)\,[\hat{\bf S}_{i}\times\hat{\bf S}_{j}],
\label{Hspin}\end{aligned}$$ where the strengths of isotropic Heisenberg exchange $J_{ij}(A)$ and anisotropic DMI ${\bf D}_{ij}(A)$ now depend on the light amplitude $A$. The summations are assumed to run over all nearest-neighbour sites $i$ and $j$. The isotropic Heisenberg exchange term describes a competition between ferromagnetic direct exchange and antiferromagnetic kinetic exchange [@PhysRev.115.2]. Importantly, it may be switched off dynamically by varying the intensity of the high-frequency light, while the anisotropic DMI remains non-zero [@Control2].
![Stable nanoskyrmion-designed DMI abbreviation resulting from the Monte Carlo simulation of the Heisenberg-exchange-free model on the non-regular square lattice with $B_{z} = 1.2$. Arrows and color depict the in- and out-of-plane spin projection, respectively.[]{data-label="Fig1"}](Fig1.pdf){width="0.67\linewidth"}
The study of Heisenberg-exchange-free magnetism may also be achieved in other classes of systems, such as optical lattices of ultracold atomic gases. Indeed, cold atoms have enabled the observation and control of superexchange interactions, which could be reversed between ferromagnetic and antiferromagnetic [@Trotzky], as well as strong DMI [@Gong], following the realization of the spin-orbit coupling in bosonic and fermionic gases [@SO_Lin; @SO_Wang].
Here, we show that such a control of the microscopic magnetic interactions offers an unprecedented opportunity to observe and manipulate nano-scale skyrmions. Heisenberg-exchange-free nanoskyrmions actually arise from the competition between anisotropic DMI and a constant magnetic field. The latter was essentially known to stabilize the spin textures [@PhysRevX.4.031045], whereas here it is a part of the substantially different and unexplored mechanism responsible for nanoskyrmions. Fig. \[Fig1\] immediately highlights that an arbitrary system of few-atom skyrmions can be stabilized and controlled on a non-regular lattice with open boundary conditions, which was not possible at all in the presence of isotropic Heisenberg exchange.
[*Heisenberg-exchange-free Hamiltonian*]{} — Motivated by the recent predictions and experiments discussed above, we consider the following spin Hamiltonian $$\begin{aligned}
&\hat H_{\rm Hef} =
\sum_{{\ensuremath{\left\langle ij \right\rangle}}}{\bf D}_{ij}\,[\hat{\bf S}_{i}\times\hat{\bf S}_{j}] - \sum_{i}{\bf B}\hat{\bf S}_{i},
\label{DMI}\end{aligned}$$ where the magnetic field is perpendicular to the two dimensional system and ${\bf B}=~(0,0,B_{z})$. The latter tends to align the spins in the $z$ direction, while DMI flavors their orthogonal orientations. At the quantum level this non-trivial competition provides a fundamental resource in quantum information processing [@QuantInf]. Here, we are interested in the semi-classical description of the Heisenberg-exchange-free magnetism.
![Magnetic frustration in elementary DMI clusters of the triangular ([**a**]{}) and square ([**b**]{}) lattices. Curving arrows denote clockwise direction of the bonds in each cluster. Big gray arrows correspond to the in-plane DMI vectors. Black arrows in circles denote the in-plane directions of the spin moments. Blue dashed and red dotted lines indicate the bonds with minimal and zero DMI energy, respectively. ([**c**]{}) and ([**d**]{}) illustrate the examples of the spin configurations corresponding to classical ground state of the DMI Hamiltonian.[]{data-label="Fig2"}](Fig2.pdf){width="1\linewidth"}
[*DMI-induced frustration*]{} — In the case of the two-dimensional materials with pure DMI between nearest neighbours, magnetic frustration is the intrinsic property of the system. To show this let us start off with the elementary plaquettes of the triangular and square lattices without external magnetic field (see Fig. \[Fig2\]). Keeping in mind real two-dimensional materials with the $C_{nv}$ symmetry [@graphene; @silicon] we consider the in-plane orientation of the DMI vector perpendicular to the corresponding bond. Taking three spins of a single square plaquette as shown in Fig. \[Fig2\] [**b**]{}, one can minimize their energy while discarding their coupling with the fourth spin. Then, the orientation of the remaining spin can not be uniquely defined, because the spin configuration regardless whether it points “up” or “down” has the same energy, which indicates frustration. Thus, Fig. \[Fig2\] [**d**]{} gives the example of the classical ground state of the square plaquette with the energy ${\rm E}_{\square} = - {\mkern-6mu\mathop{}\oldsqrt[\mkern8mu]{2}}\,|\mathbf{D}_{ij}|\,S^2$ and magnetization ${\rm M}^z_{\square} = S
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: 'We use Stein’s method to bound the Wasserstein distance of order $2$ between a measure $\nu$ and the Gaussian measure using a stochastic process $(X_t)_{t \geq 0}$ such that $X_t$ is drawn from $\nu$ for any $t > 0$. If the stochastic process $(X_t)_{t \geq 0}$ satisfies an additional exchangeability assumption, we show it can also be used to obtain bounds on Wasserstein distances of any order $p \geq 1$. Using our results, we provide optimal convergence rates for the multi-dimensional Central Limit Theorem in terms of Wasserstein distances of any order $p \geq 2$ under simple moment assumptions.'
author:
- |
Thomas Bonis\
DataShape team, Inria Saclay, Université Paris-Saclay, Paris, France\
thomas.bonis@inria.fr
bibliography:
- 'Bibliography.bib'
title:
- 'Stein’s method for normal approximation in Wasserstein distances with application to the multivariate Central Limit Theorem [^1] '
- 'Stein’s method for normal approximation in Wasserstein distances with application to the multivariate Central Limit Theorem'
---
Acknowledgements {#acknowledgements .unnumbered}
================
The author would like to thank Michel Ledoux for his many comments and advice regarding the redaction of this paper as well as Jérôme Dedecker and Yvik Swan, Chi Tran and Frédéric Chazal for their multiple remarks.
[^1]: The author was supported by the French Délégation Générale de l’Armement (DGA) and by ANR project TopData ANR-13-BS01-0008.
|
{
"pile_set_name": "ArXiv"
}
|
---
address:
- 'Department of Mathematics, University of Michigan, East Hall, 525 East University Avenue, Ann Arbor, MI 48109-1109, USA'
- 'Department of Mathematics, University of Illinois at Chicago, 851 S. Morgan St., M/C. 249, Chicago, IL 60607-7045, USA'
- 'Department of Mathematics, Harvard University, 1 Oxford Street, Cambridge, MA 02138, USA'
author:
- Tommaso de Fernex
- Lawrence Ein
- Mircea Mustaţǎ
title: Bounds for log canonical thresholds with applications to birational rigidity
---
Introduction {#introduction .unnumbered}
============
Let $X$ be a smooth algebraic variety, defined over an algebraically closed field of characteristic zero, and let $V \subset X$ be a proper closed subscheme. Our main goal in this paper is to study an invariant of the pair $(X,V)$, called the log canonical threshold of $X$ along $V$, and denoted by $\operatorname{lc}(X,V)$. Interest in bounds for log canonical thresholds is motivated by techniques that have recently been developed in higher dimensional birational geometry. In this paper, we study this invariant using intersection theory, degeneration techniques and jet schemes.
A natural question is how does this invariant behave under basic operations such as restrictions and projections. Restriction properties have been extensively studied in recent years, leading to important results and conjectures. In the first section of this paper, we investigate the behavior under projections, and we prove the following result (see Theorem \[thm1\] for a more precise statement):
\[thm1-intro\] With the above notation, suppose that $V$ is Cohen-Macaulay, of pure codimension $k$, and let $f : X \to Y$ be a proper, dominant, smooth morphism of relative dimension $k-1$, with $Y$ smooth. If $f|_V$ is finite, then $$\operatorname{lc}(Y,f_*[V]) \leq \frac{k! \. \operatorname{lc}(X,V)^k}{k^k},$$ and the inequality is strict if $k\geq 2$. Moreover, if $V$ is locally complete intersection, then $$\operatorname{lc}(Y,f_*[V]) \leq \frac{\operatorname{lc}(X,V)^k}{k^k}.$$
Examples show that these bounds are sharp. The proof of the above theorem is based on a general inequality relating the log canonical threshold of a fractional ideal of the form $h^{-b}\. \a$, and the colength of $\a$. Here $\a$ is a zero dimensional ideal in the local ring of $X$ at some (not necessarily closed) point, $b\in{\mathbb Q}_+$, and $h$ is the equation of a smooth divisor. We prove this inequality in the second section (see Theorem \[l(a)-e(a)\]), using a degeneration to monomial ideals. It generalizes a result from [@DEM], which was the case $b=0$.
In the third section, we give lower bounds for the log canonical threshold of affine subschemes defined by homogeneous equations of the same degree. We prove the following
Let $V\subset X=\A^n$ be a subscheme defined by homogeneous equations of degree $d$. Let $c=\operatorname{lc}(\A^n, V)$, and let $Z$ be the non log terminal locus of $(\A^n, c\. V)$. If $e=\operatorname{codim}(Z,\A^n)$, then $$\operatorname{lc}(\A^n,V) \ge \frac{e}d.$$ Moreover, we have equality if and only if the following holds: $Z$ is a linear subspace, and if $\pi : \A^n\longrightarrow\A^n/Z$ is the projection, then there is a subscheme $V'\subset\A^n/Z$ such that $V=\pi^{-1}(V')$, $\operatorname{lc}(\A^n/Z,V')=e/d$, and the non log terminal locus of $(\A^n/Z,(e/d)\. V')$ is the origin.
The proof of this result is based on the characterization of the log canonical threshold via jet schemes from [@Mu2]. In the particular case when $V$ is the affine cone over a projective hypersurface with isolated singularities, the second assertion in the above result proves a conjecture of Cheltsov and Park from [@CP].
In the last section we apply the above bounds in the context of birational geometry. In their influential paper [@IM], Iskovskikh and Manin proved that a smooth quartic threefold is what is called nowadays birationally superrigid; in particular, every birational automorphism is regular, and the variety is not rational. There has been a lot of work to extend this result to other Fano varieties of index one, in particular to smooth hypersurfaces of degree $N$ in $\P^N$, for $N>4$. The case $N=5$ was done by Pukhlikov in [@Pu2], and the cases $N=6,7,8$ were proven by Cheltsov in [@Ch2]. Moreover, Pukhlikov showed in [@Pu5] that a general hypersurface as above is birationally superrigid, for every $N>4$. We use our results to give an easy and uniform proof of birational superrigidity for arbitrary smooth hypersurfaces of degree $N$ in $\P^N$ when $N$ is small.
\[thm3\_introd\] If $X\subset{\mathbb P}^N$ is a smooth hypersurface of degree $N$, and if $4\leq N\leq 12$, then $X$ is birationally superrigid.
Based on previous ideas of Corti, Pukhlikov proposed in [@Pu1] a proof of the birational rigidity of every smooth hypersurface of degree $N$ in $\P^N$, for $N\geq 6$. Unfortunately, at the moment there is a gap in his arguments (see Remark \[gap\] below). Despite this gap, the proof proposed in [@Pu1] contains many remarkable ideas, and it seems likely that a complete proof could be obtained in the future along those lines. In fact, the outline of the proof of Theorem \[thm3\_introd\] follows his method, and our contribution is mainly to simplifying and solidifying his argument.
Acknowledgements {#acknowledgements .unnumbered}
----------------
We are grateful to Steve Kleiman and Rob Lazarsfeld for useful discussions. Research of the first author was partially supported by MURST of Italian Government, National Research Project (Cofin 2000) “Geometry of Algebraic Varieties”. Research of the second author was partially supported by NSF Grant DMS 02-00278. The third author served as a Clay Mathematics Institute Long-Term Prize Fellow while this research has been done.
Singularities of log pairs under projections
============================================
Let $X$ be a smooth algebraic variety, defined over an algebraically closed field of characteristic zero, and let $V \subset X$ be a proper subscheme. For any rational number $c > 0$, we can consider the pair $(X,c\. V)$. The usual definitions in the theory of singularities of pairs, for which we refer to [@Ko], extend to this context. In particular, we say that an irreducible subvariety $C \subset X$ is a center of non log canonicity (resp. non log terminality, non canonicity, non terminality) for $(X,c\. V)$ if there is at least one divisorial valuation of $K(X)$, with center $C$ on $X$, whose discrepancy along $(X,c\.V)$ is $<-1$ (resp. $\le -1$, $<0$, $\le 0$). We will denote by $\operatorname{lc}(X,V)$ the log canonical threshold of the pair $(X,V)$, i.e., the largest $c$ such that $(X,c\. V)$ is log canonical. We will occasionally consider also pairs of the form $(X,c_1\. V_1-c_2\.V_2)$, where $V_1$, $V_2\subset X$ are proper subschemes of $X$. The definition of (log) terminal and canonical pairs extends in an obvious way to this setting.
We fix now the set-up for this section. Let $f : X \to Y$ be a smooth and proper morphism onto a smooth algebraic variety $Y$. We assume that $V\subset X$ is a pure dimensional, Cohen-Macaulay closed subscheme, such that $\dim V = \dim Y - 1$, and such that the restriction of $f$ to $V$ is finite. If $[V]$ denotes the cycle associated to $V$, then its push-forward $f_*[V]$ determines an effective Cartier divisor on $Y$. We set $\operatorname{codim}(V,X)=k$.
\[thm1\] With the above notation, let $C \subset X$ be an irreducible center of non log terminality for $(X,c\. V)$, for some $c>0$. Then $f(C)$ is a center of non log terminality (even non log canonicity, if $k\geq 2$) for the pair $$\label{gen_formula}
\( Y, \frac{k! \. c^k
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: 'The standing wave nodes of nonradial oscillations on a neutron star crust will drift with a definite angle velocity around rotational pole due to the rotation of neutron stars. This is called the nonradial oscillation node precession of neutron stars. This article estimated the precession velocity and pointed out that it merely lies on the star’s rotation velocity and the angular order of spherical harmonic $l$ by one order approximation. If we suppose that oscillations effect the particles’ escaping from the polar cap of a neutron star, so that the antinode and node areas of the standing waves have different radiative intensity, several unusual conclusions are acquired by reviewing the observation of pulsars which had already been taken as neutron stars. For example, the drifting subpulse period $P_{3}$ can be gotten from the width of subpulses and order $l$; the larger velocity drift may produce the peak structure of average pulse profiles; the dissimilar radiation phenomena between neighboring periods generated from drift provide a reasonable explanation of interpulses which have been found on some pulsars.'
author:
- |
[Haochen Li]{}\
[Physics Department, Washington University]{}\
[St. Louis, MO 63143]{}
date: 'March 28, 2001'
title: The Nonradial Oscillation Node Precession of Neutron Stars
---
=-2mm =-1.50mm =6.7in =8.5in
Introduction
============
####
Boriakoff (1976) had detected quasi-periodic micropulsations within the subpulses of PSR 2016+28, and inclined to take it as nonradial oscillations of neutron stars. In the pulsar polar cap model (Radhakrishnan and Cooke 1969) the radio pulse is produced by the coherent radiation of particles escaping from a certain surface area of the star(polar cap)along the magnetic field lines. Because of the high particle velocity, the radiation is emitted in a narrow cone, the axis of which coincide with the velocity vector of particles, which is tangential to the magnetic field lines. Since these are periodically distorted by the star’s vibration, the radiation cone will periodically change directions, switching on and off the radiopulse illumination of the observer(modulation). Van Horn (1980) pointed out that rotating, magnetized neutron stars can support a rich variety of oscillation modes and firstly suggested a possible association of subpulse drift and torsional oscillations. The special terms of the neutron stars are considered for calculating one order approximation of the frequency split of the torsional oscillations in Section 2. And using this result, we will discuss phenomena such as drifting subpulses, average pulse profiles and interpulses of pulsars in Section 3. Section 4 is the summary.
Theory of Neutron Star Oscillation Node Precession
==================================================
####
Ruderman (1968) firstly pointed out torsional oscillation modes of neutron star crusts. Hansen and Cioffi (1980) calculated the periods of those for a range of stellar models and found those associated with fundamental modes have periods of around 20 ms. We can use this result to estimate the lowest frequency of torsional oscillation of neutron stars as$$\omega_{0}={\frac{2\pi}{20ms}}=100\pi s^{-1}.$$ The rotation angular velocity of neutron star can be considered as $2\pi s^{-1}$, thus the ratio is $$\epsilon={\frac{\Omega}{\omega_{0}}}=0.02.$$ We can see that although the angular velocity of neutron star rotation is much larger than that of common stars, it is still small compared with the frequency of self-oscillation. This inspires us that the oscillation node precession theory which has been established on other heavenly bodies can be used on neutron stars (also because the torsional oscillation is little sensitive to sphere models, see Van Horn 1980, and its results is simple). That is, we can take rotation effect as perturbation to solve the sphere oscillation equations just as Ledoux (1951) did on gaseous stars and MacDonald and Ness (1961) did on the earth, and the frequency of free oscillation of sphere crust is the sum of the undisturbed frequency plus the perturbation frequency:$$\omega=\omega_{0}+\omega^{1}.$$ As one order approximation for torsional oscillation,$$\omega^{1}={\frac{m}{l(l+1)}}\Omega,$$ where $l$ and $m$ are integers denoting angular orders of spherical harmonic. As the theory of oscillation of stars (Ledoux 1951) and the earth(MacDonald and Ness 1961) has noted, each value of $m$ has two travelling waves associated with it. In the case of the earth one wave travels eastward, and its rate of travel is decreased by the angular velocity of earth rotation; the other travels westward, and its rate is faster. The waves corresponded with neighboring values of $m$ have relative angular velocity $${\frac{\Omega}{l(l+1)}}.$$ The combined effect is to produce a standing-wave pattern that for a given value of $m$ moves westward with the angular velocity $${\frac{\Omega}{l(l+1)}}$$ of its nodes, which is well known in seismology as the node precession of oscillations. And this is just the result we will use next to recur to the attempt which Van Horn (1980) had made to connect the torsional oscillation of rotating neutron stars with the observation phenomena of pulsars.
Discussion
==========
Drifting Subpulses
------------------
####
We suppose that the node and antinode of the standing wave separately correspond with those of subpulse radiate wave pattern, i.e., drifting subpulses reflect the node precession. Then the degrees of subpulse drift in one period of a pulsar rotation (Manchester and Taylor 1977) is $$D_{\phi}={\frac{\Omega}{l(l+1)}} P_{1}={\frac{360}{l(l+1)}},$$ where $P_{1}$ is the pulsar rotational period and 360 of longitude are equal to one pulsar period. We can see that when $D_{\phi}$ is smaller than the width of subpulses (the drifting subpulse observation results are exactly so, see Manchester and Taylor 1977), then we get the subpulse drifting-band spacing $$P_{3}={\frac{\frac{P_{2}}{P_{1}}\times360}{D_{\phi}}}={\frac{l(l+1)}{\frac{P_{1}}{P_{2}}}}$$(in units of $P_{1}$),where $P_{2}$ is the subpulse period (converted from degrees of longitude). We calculated the values of $P_{3}$ for several pulsars using the observational data from Van Horn(1980) and Wright and Fowler(1981). The results are listed in Table 1. Note that these are acquired with larger values of $l$, with which the values of $P_{3}$ increase. Several proximal values have been enumerated in the table for compare. The difference between theoretical and observational values probably due to error and disconsidering of the coupling of several values of $l$. The different values of $P_{3}$ in one pulsar are deemed to mode switch of different $l$.
Average Pulses
--------------
####
Theoretically we have no reasons to believe that the drifting pace of subpulses is always small. Then, for convenience we define drifting rate as $$V={\frac{\frac{P_{1}}{P_{2}}}{l(l+1)}},$$ which represents drift space (in units of $P_{2}$) in each rotational period of a pulsar. Because we could not find the integer drifting space (integer $V$), so the practically observed rate $V'$ rest with the decimal part of $V$. For example, if $V=3/2$ or $1/2$, then $V'=1/2$; if $V=5/3$, then $V'=2/3$ or $-1/3$(minus sign represents opposite drift direction). Here it implies that ${\frac{P_{1}}{P_{2}}}$ is integer which goes on the fact that it here represents the node number of the standing wave along the longitude of the sphere. When $l=1$ or $2$(the fundamental mode which the oscillation is most likely on), it is easy to determine that $V'$ will frequently get $1/2$, $1/6$, $2/6$(the same as $4/6$), etc. Unlike the smaller drifting pace discussed in Section 3.1, these values of $V'$ are too great to be detected as the drift we commonly mean (we do not know whether PSR 2303+30 listed in Table 1. belongs to these small $l$ modes). But in this situation subpulses will appear more frequently at the several fixures in the general radiate windows. The average pulse profiles imitated by computer program through adding a great many drifting periods show peak structures as displayed in Fig.1.
Interpulses
-----------
####
If the pulses of pulsars can embody the node precession of standing waves around the longitude of neutron stars, then according to the observed drifting pace $V'$ discussed above, it must have the circumstances that neighboring periods of pulses have different observational pictures especially when the standing wave length is longer than the general radiate window. For instance, once we see a pulse which practically is a fraction of the standing wave length(a node or nearby), then next period we see the antinode or nearby($V'=1/2$ is very common), therefore the different intensity pulses alternately occur along with the integral periods of rotation. This can give an natural explanation of interpulses (Manchester and Taylor 1977). The weaker pulse will be surely inclined to the nearby node
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: 'Using semi-empirical isochrones, we find the age of the Taurus star-forming region to be 3-4 Myr. Comparing the disc fraction in Taurus to young massive clusters suggests discs survive longer in this low density environment. We also present a method of photometrically de-reddening young stars using $iZJH$ data.'
---
Introduction
============
Taurus is a low-density star-forming region containing primarily low-mass stars and so represents an ideal laboratory for studying the environmental effects on circumstellar disc lifetimes [@Kenyon2008 (Kenyon et al. 2008)]. To investigate the impact of the low-density environment on the discs in Taurus, we used the Wide-Field Camera (WFC) on the 2.5m Isaac Newton Telescope (INT) on La Palma to obtain $griZ$ photometry of 40 fields in Taurus. Our fields are focused on the densest regions not covered by the Sloan Digital Sky Survey. The resultant INT-WFC survey mainly covers the L1495, L1521 and L1529 clouds.
We have augmented the WFC data with near-infrared $JHK$ data from 2MASS [@Cutri2003 (Cutri et al. 2003)]. To determine the age of Taurus we compare the semi-empirical isochrones discussed in [@Bell2013; @Bell2014 Bell et al. (2013, 2014)] to the observed colour-magnitude diagrams (CMDs). For a brief description of these isochrones see Bell et al. (these proceedings).
De-reddening
============
The extinction in Taurus is spatially variable across the different clouds, and so we require a method of de-reddening the stars individually. We have found that in an $i$-$Z$, $J$-$H$ colour-colour diagram the reddening vectors are almost perpendicular to the theoretical stellar sequence (Fig.\[fig:izjh\_age\]), whose position is almost independent of age, and so we can de-redden stars using photometry alone. We construct a grid of models over a range of ages (1 to 10 Myr) and binary mass ratios (single star to equal mass binary). We adopt the reddening law from [@Fitzpatrick1999 Fitzpatrick (1999)], apply it to the atmospheric models and fold the result through sets of filter responses to derive reddening coefficients in each photometric system.
[0.45]{} ![**Left:** $i$-$Z$, $J$-$H$ diagram for Taurus members. Asterisks are Class II sources, open circles are Class III sources. Overlaid as solid lines are a 2 and 4Myr isochrone. The dashed lines are reddening vectors in this colour space. **Right:** $r$, $r$-$i$ diagram for Taurus members identified as Class III. Isochrones of 1, 4 and 10Myr are overlaid. Asterisks indicate the position of a theoretical star with mass 0.75M$_\odot$. The black dashed line shows a reddening vector for A$_V$ = 1 mag. []{data-label="fig:izjh_age"}](izjh.eps "fig:"){width="\textwidth" height="5.5cm"} \[fig:izjh\_ccd\]
[0.45]{} ![**Left:** $i$-$Z$, $J$-$H$ diagram for Taurus members. Asterisks are Class II sources, open circles are Class III sources. Overlaid as solid lines are a 2 and 4Myr isochrone. The dashed lines are reddening vectors in this colour space. **Right:** $r$, $r$-$i$ diagram for Taurus members identified as Class III. Isochrones of 1, 4 and 10Myr are overlaid. Asterisks indicate the position of a theoretical star with mass 0.75M$_\odot$. The black dashed line shows a reddening vector for A$_V$ = 1 mag. []{data-label="fig:izjh_age"}](age.eps "fig:"){width="\textwidth" height="5.5cm"} \[fig:age\]
It is well known that for a fixed value of E(B-V), extinction in a given filter will vary with [$T_{\mathrm{eff}}$]{} (see e.g. [@Bell2013 Bell et al. 2013]). To account for this we use extinction tables to redden the isochrones for a grid of E($B$-$V$) and [$T_{\mathrm{eff}}$]{} values, and compare the reddened model grid to the data. We adopt a Bayesian approach and marginalise over binary mass, age and [$T_{\mathrm{eff}}$]{}. We take the extinction values from the model with the highest likelihood, and use this to de-redden the star.
Taurus
======
Plotting the de-reddened Taurus members in the $r$, $r$-$i$ CMD, we notice that a significant fraction of the Class II objects appear much fainter than the primary locus. This is likely an accretion effect, and if we were to fit for the age of these members we would derive an age that is erroneously old. To avoid this effect, we fit only the Class III sources. We note that those Class II sources that are not scattered below the sequence lie coincident with the Class III sources, and thus we believe the age derived from the Class III sources alone will be representative of the overall age. We plot our de-reddened Taurus members in an $r$, $r$-$i$ CMD to fit for the age (Fig.\[fig:izjh\_age\]). We find that isochrones of 3-4 Myr (older than is commonly quoted in the literature) trace the observed stellar sequence well. To ensure consistency with the [@Bell2013 Bell et al. (2013)] age scale we compare the position of a theoretical star with a mass of 0.75 M$_\odot$ to the middle of the observed sequence. We find consistency with the overall isochrone fitting, with an age of 3-4 Myr still providing a good fit. With a robust age for Taurus we then examined the disc fraction. Taurus has a disc fraction of 69% [@Luhman2010 (Luhman et al. 2010)]. If we compare this to the other clusters in [@Bell2013 Bell et al. (2013)], which are on the same age scale, we find that Taurus has the largest disc fraction in the sample, significantly higher than the group of young (2 Myr), massive clusters, suggesting that discs may have survived longer in the low density environment present in Taurus.
2013, *MNRAS*, 434, 806
2014, *MNRAS*, 445, 3496
2003, *2MASS All Sky Catalog of point sources.*
1999, *PASP*, 111, 63
2008, *Handbook of Star Forming Regions, Vol. 1*, p.405
2010, *ApJS*, 186, 111
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: 'Inspired by the paper of Tasaka [@tasaka], we study the relations between totally odd, motivic depth-graded multiple zeta values. Our main objective is to determine the rank of the matrix $C_{N,r}$ defined by Brown [@Brown]. We will give new proofs for (conjecturally optimal) upper bounds on ${\operatorname{rank}}C_{N,3}$ and ${\operatorname{rank}}C_{N,4}$, which were first obtained by Tasaka [@tasaka]. Finally, we present a recursive approach to the general problem, which reduces the evaluation of ${\operatorname{rank}}C_{N,r}$ to an isomorphism conjecture.'
address:
- 'Charlotte Dietze, Max-Planck-Institut für Mathematik,Vivatsgasse 7,53111 Bonn, Germany'
- 'Chorkri Manai, Max-Planck-Institut für Mathematik,Vivatsgasse 7,53111 Bonn, Germany'
- 'Christian Nöbel, Max-Planck-Institut für Mathematik,Vivatsgasse 7,53111 Bonn, Germany'
- 'Ferdinand Wagner, Max-Planck-Institut für Mathematik,Vivatsgasse 7,53111 Bonn, Germany'
author:
- Charlotte Dietze
- Chokri Manai
- Christian Nöbel
- Ferdinand Wagner
bibliography:
- 'mzv.bib'
date: September 2016
title: 'Totally Odd Depth-graded Multiple Zeta Values and Period Polynomials'
---
Introduction
============
In this paper we will be interested in $\mathbb{Q}$-linear relations among totally odd depth-graded multiple zeta values (MZVs), for which there conjecturally is a bijection with the kernel of a specific matrix $C_{N,r}$ connected to restricted even period polynomials (for a definition, see [@schneps] or [@gkz2006 Section 5]). For integers $n_1,\ldots,n_{r-1}\geq1$ and $n_r\geq2$, the MZV of $n_1,\ldots,n_r$ is defined as the number $$\begin{aligned}
\zeta(n_1,\ldots,n_r)\coloneqq \sum_{0<k_1<\cdots<k_r} \frac{1}{k_1^{n_1}\cdots k_r^{n_r}}{\,}.\end{aligned}$$ We call the sum $n_1+\cdots+n_r$ of arguments the weight and their number $r$ the depth of $\zeta(n_1,\ldots,n_r)$. One classical question about MZVs is counting the number of linearly independent $\mathbb Q$-linear relations between MZVs. It is highly expected, but for now seemingly out of reach that there are no relations between MZVs of different weight. Such questions become reachable when considered in the motivic setting. Motivic MZVs $\zeta^{\mathfrak m}(n_1,\ldots,n_r)$ are elements of a certain $\mathbb Q$-algebra $\mathcal H=\bigoplus_{N\geq 0}\mathcal H_N$ which was constructed by Brown in [@brownMixedMotives] and is graded by the weight $N$. Any relation fulfilled by motivic MZVs also holds for the corresponding MZVs via the period homomorphism $per\colon\mathcal H\to \mathbb R$.
We further restrict to depth-graded MZVs: Let $\mathcal Z_{N,r}$ and $\mathcal H_{N,r}$ denote the $\mathbb Q$-vector space spanned by the real respectively motivic MZVs of weight $N$ and depth $r$ modulo MZVs of lower depth. The depth-graded MZV of $n_1,\ldots,n_r$, that is, the equivalence class of $\zeta(n_1,\ldots,n_r)$ in $\mathcal Z_{N,r}$, is denoted by $\zeta_{\mathfrak D}(n_1,\ldots,n_r)$. The elements of $\mathcal H_{N,r}$ are denoted $\zeta_{\mathfrak D}^{\mathfrak m}(n_1,\ldots,n_r)$ analogously. The dimension of $\mathcal Z_{N,r}$ is subject of the Broadhurst-Kreimer Conjecture.
The generating function of the dimension of the space $\mathcal Z_{N,r}$ is given by $$\begin{aligned}
\sum_{N,r\geq0}\dim_{\mathbb Q}\mathcal Z_{N,r}\cdot x^N y^r\overset?= \frac{1- \mathbb E(x)y}{1-\mathbb O(x)y+\mathbb S(x) y^2 - \mathbb S(x)y^4}{\,},\end{aligned}$$ where we denote $\mathbb E(x)\coloneqq \frac{x^2}{1-x^2}=x^2+x^4+x^6+\cdots$, $\mathbb O(x)\coloneqq \frac{x^3}{1-x^2}=x^3+x^5+x^7+\cdots$, and $\mathbb S(x)\coloneqq \frac{x^{12}}{(1-x^4)(1-x^6)}$.
It should be mentioned that $\mathbb S(x)=\sum_{n>0}\dim\mathcal S_n\cdot x^n$, where $\mathcal S_n$ denotes the space of cusp forms of weight $n$, for which there is an isomorphism to the space of restricted even period polynomials of degree $n-2$ (defined in [@schneps] or [@gkz2006 Section 5]).
In his paper [@Brown], Brown considered the $\mathbb Q$-vector space $\mathcal Z_{N,r}^{{\operatorname{odd}}}$ (respectively $\mathcal H_{N,r}^{{\operatorname{odd}}}$) of totally odd (motivic) and depth-graded MZVs, that is, $\zeta_{\mathfrak D}(n_1,\ldots,n_r)$ (respectively $\zeta_{\mathfrak D}^{\mathfrak m}(n_1,\ldots,n_r)$) for $n_i\geq3$ odd, and linked them to a certain explicit matrix $C_{N,r}$, where $N=n_1+\cdots+n_r$ denotes the weight. In particular, he showed that any right annihilator $(a_{n_1,\ldots,n_r})_{(n_1,\ldots,n_r)\in S_{N,r}}$ of $C_{N,r}$ induces a relation $$\begin{aligned}
\sum_{(n_1,\ldots,n_r)\in S_{N,r}}a_{n_1,\ldots,n_r}\zeta_{\mathfrak D}^{\mathfrak m}(n_1,\ldots,n_r)=0{\,},\text{ hence also }\sum_{(n_1,\ldots,n_r)\in S_{N,r}}a_{n_1,\ldots,n_r}\zeta_{\mathfrak D}(n_1,\ldots,n_r)=0\end{aligned}$$(see Section \[sec:preliminaries\] for the notations) and conjecturally all relations in $\mathcal Z_{N,r}^{{\operatorname{odd}}}$ arise in this way. This led to the following conjecture (the uneven part of the Broadhurst-Kreimer Conjecture).
\[con:Brown\] The generating series of the dimension of $\mathcal Z_{N,r}^{{\operatorname{odd}}}$ and the rank of $C_{N,r}$ are given by $$\begin{aligned}
1+\sum_{N,r>0}{\operatorname{rank}}C_{N,r}\cdot x^Ny^r\overset?=1+\sum_{N,r>0}\dim_{\mathbb Q}\mathcal Z_{N,r}^{{\operatorname{odd}}}\cdot x^Ny^r\overset?=\frac1{1-\mathbb O(x)y+\mathbb S(x)y^2}{\,}.\end{aligned}$$
The contents of this paper are as follows. In Section \[sec:preliminaries\], we explain our notations and define the matrices $C_{N,r}$ due to Brown [@Brown] as well as $E_{N,r}$ and $E_{N,r}^{(j)}$ considered by Tasaka [@tasaka]. In Section \[sec:known results\], we briefly state some of Tasaka’s results on the matrix $E_{N,r}$. Section \[sec:main tools\] is devoted to further investigate the connection between the left kernel of $E_{N,r}$ and restricted even period polynomials, which was first discovered by Baumard and Schneps [@schneps] and appears again in [@tasaka Theorem 3.6]. In Section \[sec:main results\], we will apply our methods to the cases $r=3$ and $r=4$. The first goal of Section \[sec:main results\] will be to show
\[thm:case3\]Assume that the map from Theorem \[thm:injection\] is injective. We then have the lower bound $$\begin{aligned}
\sum_{N>0}\dim_{\mathbb Q}\ker C_{N,3}\cdot x^N\geq 2 \mathbb O(x)\mathbb
|
{
"pile_set_name": "ArXiv"
}
|
IFUP-TH 2013/21
1.4truecm
[**Background Field Method,**]{}
.5truecm
[**Batalin-Vilkovisky Formalism And**]{}
.5truecm
[**Parametric Completeness Of Renormalization**]{}
1truecm
*Damiano Anselmi* .2truecm
*Dipartimento di Fisica “Enrico Fermi”, Università di Pisa,*
*and INFN, Sezione di Pisa,*
*Largo B. Pontecorvo 3, I-56127 Pisa, Italy,*
.2truecm
damiano.anselmi@df.unipi.it
1.5truecm
**Abstract**
We investigate the background field method with the Batalin-Vilkovisky formalism, to generalize known results, study the parametric completeness of general gauge theories and achieve a better understanding of several properties. In particular, we study renormalization and gauge dependence to all orders. Switching between the background field approach and the usual approach by means of canonical transformations, we prove parametric completeness without making use of cohomological theorems; namely we show that if the starting classical action is sufficiently general all divergences can be subtracted by means of parameter redefinitions and canonical transformations. Our approach applies to renormalizable and nonrenormalizable theories that are manifestly free of gauge anomalies and satisfy the following assumptions: the gauge algebra is irreducible and closes off shell, the gauge transformations are linear functions of the fields, and closure is field independent. Yang-Mills theories and quantum gravity in arbitrary dimensions are included, as well as effective and higher-derivative versions of them, but several other theories, such as supergravity, are left out.
1truecm
Introduction
============
The background field method [@dewitt; @abbott] is a convenient tool to quantize gauge theories and make explicit calculations, particularly when it is used in combination with the dimensional-regularization technique. It amounts to choosing a nonstandard gauge fixing in the conventional approach and, among its virtues, it keeps the gauge transformations intact under renormalization. However, it takes advantage of properties that only particular classes of theories have.
The Batalin-Vilkovisky formalism [@bata] is also useful for quantizing general gauge theories, especially because it collects all ingredients of infinitesimal gauge symmetries in a single identity, the master equation, which remains intact through renormalization, at least in the absence of gauge anomalies.
Merging the background field method with the Batalin-Vilkovisky formalism is not only an interesting theoretical subject *per se*, but can also offer a better understanding of known results, make us appreciate aspects that have been overlooked, generalize the validity of crucial theorems about the quantization of gauge theories and renormalization, and help us address open problems. For example, an important issue concerns the generality of the background field method. It would be nice to formulate a unique treatment for all gauge theories, renormalizable and nonrenormalizable, unitary and higher derivative, with irreducible or reducible gauge algebras that close off shell or only on shell. However, we will see that at this stage it is not possible to achieve that goal, due to some intrinsic features of the background field method.
Another important issue that we want to emphasize more than has been done so far is the problem of *parametric completeness* in general gauge theories [@regnocoho]. To ensure renormalization-group (RG) invariance, all divergences must be subtracted by redefining parameters and making canonical transformations. When a theory contains all independent parameters necessary to achieve this goal, we say that it is parametrically complete. The RG-invariant renormalization of divergences may require the introduction of missing Lagrangian terms, multiplied by new physical constants, or even deform the symmetry algebra in nontrivial ways. However, in nonrenormalizable theories such as quantum gravity and supergravity it is not obvious that the action can indeed be adjusted to achieve parametric completeness. One way to deal with this problem is to classify the whole cohomology of invariants and hope that the solution satisfies suitable properties. This method requires lengthy technical proofs that must be done case by case [@coho], and therefore lacks generality. Another way is to let renormalization build the new invariants automatically, as shown in ref. [@regnocoho], with an algorithm that is able to iteratively extend the classical action converting divergences into finite counterterms. However, that procedure is mainly a theoretical tool, because although very general and conceptually minimal, it is practically unaffordable. Among the other things, it leaves the possibility that renormalization may dynamically deform the gauge symmetry in physically observable ways. A third possibility is the one we are going to treat here, taking advantage of the background field method. Where it applies, it makes cohomological classifications unnecessary and excludes that renormalization may dynamically deform the symmetry in observable ways. Because of the intrinsic properties of the background field method, the approach of this paper, although general enough, is not exhaustive. It is general enough because it includes the gauge symmetries we need for physical applications, namely Abelian and non-Abelian Yang-Mills symmetries, local Lorentz symmetry and invariance under general changes of coordinates. At the same time, it is not exhaustive because it excludes other potentially interesting symmetries, such as local supersymmetry.
To be precise, our results hold for every gauge symmetry that satisfies the following properties: the algebra of gauge transformations ($i$) closes off shell and ($ii$) is irreducible; moreover ($iii$) there exists a choice of field variables where the gauge transformations $\delta _{\Lambda }\phi $ of the physical fields $\phi $ are linear functions of $\phi $ and the closure $[\delta _{\Lambda
},\delta _{\Sigma }]=\delta _{[\Lambda ,\Sigma ]}$ of the algebra is $\phi $ independent. We expect that with some technical work it will be possible to extend our results to theories that do not satisfy assumption ($ii$), but our impression is that removing assumptions ($i$) and ($iii$) will be much harder, if not impossible.
In this paper we also assume that the theory is manifestly free of gauge anomalies. Our results apply to renormalizable and nonrenormalizable theories that satisfy the assumptions listed so far, among which are QED, Yang-Mills theories, quantum gravity and Lorentz-violating gauge theories [@lvgauge], as well as effective [@weinberg], higher-derivative [@stelle] and nonlocal [@tombola] versions of such theories, in arbitrary dimensions, and extensions obtained including any set of composite fields. We recall that Stelle’s proof [@stelle] that higher-derivative quantum gravity is renormalizable was incomplete, because it assumed without proof a generalization of the Kluberg-Stern–Zuber conjecture [@kluberg] for the cohomological problem satisfied by counterterms. Even the cohomological analysis of refs. [@coho] does not directly apply to higher-derivative quantum gravity, because the field equations of higher-derivative theories are not equal to perturbative corrections of the ordinary field equations. These remarks show that our results are quite powerful, because they overcome a number of difficulties that otherwise need to be addressed case by case.
Strictly speaking, our results, in their present form, do not apply to chiral theories, such as the Standard Model coupled to quantum gravity, where the cancellation of anomalies is not manifest. Nevertheless, since all other assumptions we have made concern just the forms of gauge symmetries, not the forms of classical actions, nor the limits around which perturbative expansions are defined, we expect that our results can be extended to all theories involving the Standard Model or Lorentz-violating extensions of it [@kostelecky; @LVSM]. However, to make derivations more easily understandable it is customary to first make proofs in the framework where gauge anomalies are manifestly absent, and later extend the results by means of the Adler-Bardeen theorem [@adlerbardeen]. We follow the tradition on this, and plan to devote a separate investigation to anomaly cancellation.
Although some of our results are better understandings or generalizations of known properties, we do include them for the sake of clarity and self-consistence. We think that our formalism offers insight on the issues mentioned above and gives a more satisfactory picture. In particular, the fact that background field method makes cohomological classifications unnecessary is something that apparently has not been appreciated enough so far. Moreover, our approach points out the limits of applicability of the background field method.
To achieve parametric completeness we proceed in four basic steps. First, we study renormalization to all orders subtracting divergences “as they come”, which means without worrying whether the theory contains enough independent parameters for RG invariance or not. Second, we study how the renormalized action and the renormalized $\Gamma $ functional depend on the gauge fixing, and work out how the renormalization algorithm maps a canonical transformation of the classical theory into a canonical transformation of the renormalized theory. Third, we renormalize the canonical transformation that continuously interpolates between the background field approach and the conventional approach. Fourth, comparing the two approaches we show that if the classical action $S_{c}(\phi ,\lambda )$ contains all gauge invariant terms determined by the starting gauge symmetry, then there exists a canonical transformation $\Phi ,K\rightarrow \hat{\Phi},\hat{K}$ such that $$S_{R\hspace{0.01in}\text{min}}(\Phi ,{\mkern2mu\underline{\mkern-2mu\smash{\phi }\mkern-2mu}\mkern2mu },K)=S_{c}(\hat{\phi}+{\mkern2mu\underline{\mkern-2mu\smash{\phi }\mkern-2mu}\mkern
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: 'We numerically investigate the self-diffusion coefficient and correlation length of the rigid clusters (i.e., the typical size of the collective motions) in sheared soft athermal particles. Here we find that the rheological flow curves on the self-diffusion coefficient are collapsed by the proximity to the jamming transition density. This feature is in common with the well-established critical scaling of flow curves on shear stress or viscosity. We furthermore reveal that the divergence of the correlation length governs the critical behavior of the diffusion coefficient, where the diffusion coefficient is proportional to the correlation length and the strain rate for a wide range of the strain rate and packing fraction across the jamming transition density.'
author:
- Kuniyasu Saitoh
- Takeshi Kawasaki
bibliography:
- 'diffusion\_overdamp.bib'
title: Critical scaling of diffusion coefficients and size of rigid clusters of soft athermal particles under shear
---
Introduction
============
*Transport properties* of soft athermal particles, e.g. emulsions, foams, colloidal suspensions, and granular materials, are important in science and engineering technology [@bird]. In many manufacturing processes, these particles are forced to flow (through pipes, containers, etc.) and the transportation of “flowing particles" is of central importance for industrial applications [@larson]. Therefore, there is a need to understand how the transport properties are affected by rheological flow properties of soft athermal particles.
Recently, the rheological flow properties of soft athermal particles have been extensively studied and it has been revealed that the rheology of such particulate systems depends not only on strain rate but also on packing fraction of the particles [@rheol0; @pdf1; @rheol1; @rheol2; @rheol3; @rheol4; @rheol5; @rheol6; @rheol7; @rheol8; @rheol9; @rheol10; @rheol11; @rheol12; @rheol13]. If the packing fraction $\phi$ is lower than the so-called jamming transition density $\phi_J$, steady state stress is described by either Newtonian [@rheol0; @pdf1] or Bagnoldian rheology [@rheol1; @rheol2; @rheol3; @rheol4; @rheol5] (depending on whether particle inertia is significant or not). If the packing fraction exceeds the jamming point ($\phi>\phi_J$), one observes yield stress at vanishing strain rate [@review-rheol0]. These two trends are solely determined by the proximity to the jamming transition $|\Delta\phi|\equiv|\phi-\phi_J|$ [@rheol0] and rheological flow curves of many types of soft athermal particles have been explained by the critical scaling near jamming [@pdf1; @rheol1; @rheol2; @rheol3; @rheol4; @rheol5; @rheol6; @rheol7; @rheol8; @rheol9; @rheol10; @rheol11].
On the other hand, the mass transport or *self-diffusion* of soft athermal particles seems to be controversial. As is the rheological flow behavior on shear stress or viscosity, the diffusivity of the particles under shear is also dependent on both the strain rate and packing fraction. Its dependence on the shear rate $\dot{\gamma}$ is weakened with the increase of $\dot{\gamma}$,i.e. the diffusivity $D$ exhibits a crossover from a linear scaling $D\sim\dot{\gamma}$ to the sub-linear scaling $D\sim\dot{\gamma}^q$ at a characteristic shear rate $\dot{\gamma}_c$, where the exponent is smaller than unity, $q<1$ [@diff_shear_md7; @diff_shear_md6; @dh_md2; @diff_shear_exp2; @diff_shear_exp1; @diff_shear_md2; @diff_shear_md3; @diff_shear_md4]. For example, in molecular dynamics (MD) simulations of Durian’s bubble model in two dimensions [@diff_shear_md7; @diff_shear_md6] and frictionless granular particles in three dimensions [@dh_md2], the diffusivity varies from $D\sim\dot{\gamma}$ ($\dot{\gamma}<\dot{\gamma}_c$) to $D\sim\dot{\gamma}^{0.8}$ ($\dot{\gamma}>\dot{\gamma}_c$). These results agree with laboratory experiments of colloidal glasses under shear [@diff_shear_exp2; @diff_shear_exp1] and also suggest that the diffusivity does not depend on spatial dimensions. However, another crossover, i.e. from $D\sim\dot{\gamma}$ to $D\sim\dot{\gamma}^{1/2}$, was suggested by the studies of amorphous solids (though the scaling $D\sim\dot{\gamma}^{1/2}$ is the asymptotic behavior in rapid flows $\dot{\gamma}\gg\dot{\gamma}_c$) [@diff_shear_md2; @diff_shear_md3; @diff_shear_md4]. In addition, it was found in MD simulations of soft athermal disks that in a sufficiently small flow rate range, the diffusivity changes from $D\sim\dot{\gamma}$ ($\phi<\phi_J$) to $\dot{\gamma}^{0.78}$ ($\phi\simeq\phi_J$) [@diff_shear_md0], implying that the crossover shear rate $\dot{\gamma}_c$ vanishes as the system approaches jamming from below $\phi\rightarrow\phi_J$.
Note that the self-diffusion of soft athermal particles shows a clear difference from the diffusion in glass; *no plateau* is observed in (transverse) mean square displacements (MSDs) [@diff_shear_md0; @diff_shear_md2; @diff_shear_md3; @diff_shear_md4; @diff_shear_md7; @dh_md2]. The absence of sub-diffusion can be also seen in quasi-static simulations ($\dot{\gamma}\rightarrow 0$) of soft athermal disks [@dh_qs1] and MD simulations of granular materials sheared under constant pressure [@diff_shear_md1].
Because the self-diffusion can be associated with collective motions of soft athermal particles, researchers have analyzed spatial correlations of velocity fluctuations [@rheol0] or non-affine displacements [@nafsc2] of the particles under shear. Characteristic sizes of collectively moving regions, i.e. *rigid clusters*, are then extracted as functions of $\dot{\gamma}$ and $\phi$, however, there is a lack of consensus on the scaling of the sizes. For example, the size of rigid clusters $\xi$ diverges as the shear rate goes to zero $\dot{\gamma}\rightarrow 0$ so that the power-law scaling $\xi\sim\dot{\gamma}^{-s}$ was suggested, where the exponent varies from $s=0.23$ to $0.5$ depending on numerical models and flow conditions [@dh_md2; @diff_shear_md1]. The dependence of the rigid cluster size on packing fraction is also controversial. If the system is below jamming, critical scaling of the size is given by $\xi\sim|\Delta\phi|^{-w}$, where different exponents (in the range between $0.5\le w\le 1.0$) have been reported by various simulations [@rheol0; @nafsc2; @rheol16]. In contrast, if the system is above jamming, the size becomes insensitive to the packing fraction (or exceeds the system size $L$) as only $L$ is the relevant length scale, i.e. $\xi\sim L$, in a quasi-static regime [@diff_shear_md2; @diff_shear_md3; @diff_shear_md4; @pdf1]. From a scaling argument, a relation between the diffusivity and size of rigid clusters was proposed as $$D\sim d_0\xi\dot{\gamma}~,
\label{eq:rigid_cluster}$$ where $d_0$ is the particle diameter [@diff_shear_md1]. It seems that previous results above jamming,i.e. as $\dot{\gamma}$ is increased, $D/\dot{\gamma}$ changes from constant to $\dot{\gamma}^{-1/2}$ and corresponding $\xi$ undergoes from $L$ to $\dot{\gamma}^{-1/2}$, support this argument [@diff_shear_md2; @diff_shear_md3; @diff_shear_md4]. However, the link between the diffusivity and rigid clusters *below jamming* is still not clear.
In this paper, we study the self-diffusion of soft athermal particles and the size of rigid clusters. The particles are driven by simple shear flows and their fluctuating motions around a mean velocity field are numerically calculated. From numerical results, we extract the diffusivity of the particles and explain its dependence on the control parameters (i.e. $\
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: 'A general method is proposed for predicting the asymptotic percolation threshold of networks with bottlenecks, in the limit that the sub-net mesh size goes to zero. The validity of this method is tested for bond percolation on filled checkerboard and “stack-of-triangle" lattices. Thresholds for the checkerboard lattices of different mesh sizes are estimated using the gradient percolation method, while for the triangular system they are found exactly using the triangle-triangle transformation. The values of the thresholds approach the asymptotic values of $0.64222$ and $0.53993$ respectively as the mesh is made finer, consistent with a direct determination based upon the predicted critical corner-connection probability.'
author:
- 'Amir Haji-Akbari'
- 'Robert M. Ziff'
bibliography:
- 'HajiAkbariZiffv3.bib'
title: 'Percolation in Networks with Voids and Bottlenecks\'
---
\[sec:Introduction\]Introduction\
=================================
Percolation concerns the formation of long-range connectivity in random systems [@Stauffer]. It has a wide range of application in problems in physics and engineering, including such topics as conductivity and magnetism in random systems, fluid flow in porous media [@Sukop2002], epidemics and clusters in complex networks [@GoltsevDorogovtsevMendes08], analysis of water structure [@BernabeiEtAl08], and gelation in polymer systems [@YilmazGelirAlverogluUysal08]. To study this phenomenon, one typically models the network by a regular lattice made random by independently making sites or bonds occupied with probability $p$. At a critical threshold $p_c$, for a given lattice and percolation type (site, bond), percolation takes place. Finding that threshold exactly or numerically to high precision is essential to studying the percolation problem on a particular lattice, and has been the subject of numerous works over the years (recent works include Refs. [@Lee08; @RiordanWalters07; @Scullard06; @ScullardZiff06; @ZiffScullard06; @ScullardZiff08; @Parviainen07; @QuintanillaZiff07; @NeherMeckeWagner08; @WiermanNaorCheng05; @JohnerGrimaldiBalbergRyser08; @KhamforoushShamsThovertAdler08; @Ambrozic08; @Kownacki08; @FengDengBlote08; @Wu06; @MajewskiMalarz07; @WagnerBalbergKlein06; @TarasevichCherkasova07; @HakobyanPapouliaGrigoriu07; @BerhanSastry07]).
In this paper we investigate the percolation characteristics of networks with bottlenecks. That is, we consider models in which we increase the number of internal bonds within a sub-net while keeping the number of contact points between sub-nets constant. We want to find how $p_c$ depends upon the mesh size in the sub-nets and in particular how it behaves as the mesh size goes to zero. Studying such systems should give insight on the behavior of real systems with bottlenecks, like traffic networks, electric power transmission networks, and ecological systems. It is also interesting from a theoretical point of view because it interrelates the percolation characteristics of the sub-net and the entire network.
An interesting class of such systems includes lattices with an ordered series of vacated areas within them. Examples include the filled checkerboard lattices (Fig. \[fig:Checkerboard\_finite\]) and the “stack-of-triangles" (Fig. \[fig:strg\_finite\]). The latter can be built by partitioning the triangular lattice into triangular blocks of dimension $L$, and alternately vacating those blocks. These internal blocks of length $L$ correspond to the sub-nets, which contact other sub-nets through the three contact points at their corners. The checkerboard lattice is the square-lattice analog of the stack-of-triangles lattice, where sub-nets are $L \times L$ square lattices which contact the other sub-nets via four contact points. Note, for the stack-of-triangles sub-nets, we also use the $L \times L$ designation, here to indicate $L$ bonds on the base and the sides.
The problem of finding the bond percolation threshold can be solved exactly for the stack-of-triangles lattice because it fits into a class of self-dual arrangements of triangles, and the triangle-triangle transformation (a generalization of the star-triangle transformation) can be used to write down equations for its percolation threshold [@Ziff_CellDualCell; @ChayesLei06]. This approach leads to an algebraic equation which can be solved using numerical root-finding methods. However due to lack of self-duality in the filled checkerboard lattices, no exact solution can be obtained for their thresholds.
It is of interest and of practical importance to investigate the limiting behavior of systems with sub-nets of an infinite number of bonds, i.e., systems where the size of sub-nets is orders of magnitude larger than the size of a single bond in the system, or equivalently, where the mesh size of the lattice compared to the sub-net size becomes small. Due to reduced connectivity, these systems will percolate at a *higher* occupation probability than a similar regular lattice. The limiting percolation threshold for infinite sub-nets is counter-intuitively non-unity, and is argued to be governed by the connectedness of contact points to the infinite percolating clusters within sub-nets. This argument leads to a simple criterion linking the threshold to the probability that the corners connect to the giant cluster in the center of the sub-net.
In this work, the limiting threshold value is computed for bond percolation on the stack-of-triangles and filled checkerboard lattices using this new criterion. Percolation thresholds are also found for a series of lattices of finite sub-net sizes. For the stack-of-triangles lattices, most percolation thresholds are evaluated analytically using the triangle-triangle transformation method, while for filled checkerboard lattices, the gradient percolation method [@Ziff_Sapoval] is used. The limiting values of $0.53993$ and $0.64222$ are found for percolation thresholds of stack-of-triangles and checkerboard lattices respectively, which are both in good agreement with the values extrapolated for the corresponding lattices of finite sub-net sizes.
We note that there are some similarities between this work and studies done on the fractal Sierpiński gaskets (triangular) [@YuYao1988] and carpets (square), but in the case of the Sierpiński models, the sub-nets are repeated in a hierarchical fashion while here they are not. For the Sierpiński gasket, which is effectively all corners, the percolation threshold is known to be 1 [@GefenAharonyShapirMandelbrot84]. For Sierpiński gaskets of a finite number of generations, the formulae for the corner connectivities can be found exactly through recursion [@TaitelbaumHavlinGrassbergerMoenig90], while here they cannot. Recently another hierarchical model with bottlenecks, the so-called Apollonian networks, which are related to duals of Sierpinski networks, has also been introduced [@AutoMoreiraHerrmannAndrade08]. In this model, the percolation threshold goes to zero as the system size goes to infinity.
\[sec:theory\]Theory\
=====================
Let $p$ be the probability that a bond in the system is occupied. Consider a network with sub-nets of infinitely fine mesh, each individually percolating (in the sense of forming “infinite" clusters but not necessarily connecting the corners) at $p_{c,s}$, and denote the overall bond percolation threshold of the entire network to be $p_{c,n}$. It is obvious that $p_{c,s}<p_{c,n}$, due to reduced connectivity in the entire network compared to connectivity in individual sub-nets. For $p_{c,s} < p < p_{c,n}$, an infinite cluster will form within each sub-net with probability $1$. However, the entire network will not percolate, because a sufficient number of connections has not yet been established between the contact points at the corners and central infinite clusters.
Now we construct an auxiliary lattice by connecting the contact points to the center of each subnet, which represents the central infinite cluster contracted into a single site. The occupation probability of a bond on this auxiliary lattice is the probability that the contact point is connected to the central infinite cluster of the sub-net. Percolation of this auxiliary lattice is equivalent to the percolation of the entire network. That is, if this auxiliary lattice percolates at a threshold $p_{c,a}$, the percolation threshold of the entire network will be determined by: $$\begin{aligned}
\label{eq:bottleneck_general}
P_{\infty,{\rm corner}}(p_{c,n})=p_{c,a}\end{aligned}$$ where $P_{\infty,{\rm corner}}(p)$ gives the probability that the corner of
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: 'We present here, for the first time, a 2D study of the overshoot convective mechanism in nova outbursts for a wide range of possible compositions of the layer underlying the accreted envelope. Previous surveys studied this mechanism only for solar composition matter accreted on top of carbon oxygen (C-O) white dwarfs. Since, during the runaway, mixing with carbon enhances the hydrogen burning rates dramatically, one should question whether significant enrichment of the ejecta is possible also for other underlying compositions (He, O, Ne, Mg), predicted by stellar evolution models. We simulated several non-carbon cases and found significant amounts of those underlying materials in the ejected hydrogen layer. Despite large differences in rates, time scales and energetics between the cases, our results show that the convective dredge up mechanism predicts significant enrichment in all our non-carbon cases, including helium enrichment in recurrent novae. The results are consistent with observations.'
date: Released 2012 June 28
title: 'Convective overshoot mixing in Nova outbursts - The dependence on the composition of the underlying white dwarf'
---
\[firstpage\]
convection-hydrodynamics,binaries:close-novae,stars:abundances
Introduction {#intro}
============
Almost all classical and recurrent novae for which reliable abundance determinations exist show enrichment (relative to solar composition) in heavy elements and/or helium. It is now widely accepted that the source for such enrichment is dredge up of matter from the underlying white dwarf to the accreted envelope. A few mechanisms for such mixing were proposed to explain the observations : Mixing by a diffusion layer, for which diffusion during the accretion phase builds a layer of mixed abundances ([@pk84; @kp85; @IfMc91; @IfMc92; @FuI92]); Mixing by shear instability induced by differential rotation during the accretion phase [@Du77; @kt78; @Macd83; @lt87; @ks87; @ks89]; Mixing by shear gravity waves breaking on the white dwarf surface in which a resonant interaction between large-scale shear flows in the accreted envelope and gravity waves in the white dwarf’s core can induce mixing of heavy elements into the envelope [@Rosner01; @alex02; @Alex2D] and finally - Mixing by overshoot of the convective flow during the runaway itself [@woo86; @saf92; @sha94; @gl95; @glt97; @Ker2D; @Ker3D; @glt2007; @Cas2010; @Cas2011a; @Cas2011b].
In this work we focus on the last of these mechanisms that proved efficient for C-O white dwarfs. Mixing of carbon from the underlying layer significantly enhances the hydrogen burning rate. The enhanced burning rate drives higher convective fluxes, inducing more mixing [@gl95; @glt97; @glt2007; @Cas2010; @Cas2011a; @Cas2011b]. Therefore, the fact that the underlying layer is rich in C is a critical feature of all the overshoot convective models that have been analyzed up to this work. According to the theory of stellar evolution for single stars, we expect the composition of the underlying white dwarf to be C-O for masses in the range $0.5-1.1 M\sun$ and ONe(Mg) for more massive white dwarfs [@GpGb01; @dom02; @Gb02]. Observations show enrichment in helium, CNO, Ne, Mg and heavier elements [@sst86; @Gehrz98; @Gehrz08; @Ili02]. For recurrent novae, helium enrichment can achieve levels of $40-50\%$ [@web1987; @anu2000; @diaz2010]. High helium abundances can simply be explained as the ashes of hydrogen burning during the runaway [@Hernanz2008], but one can not exclude the possibility that the source of He enrichment is dredge up from an underlying helium layer. We therefore found it essential to study nova outbursts for which the composition of the underlying layer is different from C-O. The models studied here extend the work we publish in the past. As a first step we study here the runaway of the accreted hydrogen layer on top of a single white dwarf, changing only its composition. Having a fixed mass and radius we can compare the timescales, convective flow, energetics and dredge up in the different cases. A more comprehensive study which varies the white dwarf’s mass with compositions is left to future work (CO, ONe(Mg) or He rich).
The present study is limited to 2D axially symmetric configurations. The well known differences between 2D and 3D unstable flows can yield uncertainties of few percents on our results, but can not change the general trends, as previous studies showed reasonable agreement between 2D and 3D simulations with regard to integral quantities, although larger differences persist in the local structure ( [@Cas2011b]). We therefore regard our present results as a good starting point to more elaborated 3D simulations. In the next section we describe the tools and the setup of the simulations. In subsequent sections we describe the results for each initial composition and then summarize our conclusions.
Tools and initial configurations {#tools}
================================
All the 2D simulations presented in this work start from a 1D hydrostatic configurations, consisting of a $1.147 M\sun$ CO core with an outer layer of $~10^{-4}\,{\ensuremath{M_{\odot}}}$ composed of CO, ONe(mg) or helium, according to the studied case as we explained in the introduction. The original core was built as a hydrostatic CO politrop that cooled by evolution to the desired central temperature ($2\times10^7 {\rm K}$). The 1D model evolves using Lagrangian coordinates and does not include any prescription for mixing at the bottom of the envelope. The core accretes matter with solar abundance and the accreted matter is compressed and heated. Once the maximal temperature at the base of the accreted envelope reaches a temperature of $9\times10^7 {\rm K}$, the whole accreted envelope $3.4\times10^{-5}\,{\ensuremath{M_{\odot}}}$ and most of the underlying zone $4.7\times10^{-5}\,{\ensuremath{M_{\odot}}}$ , are mapped onto a 2D grid, and the simulations continue to runaway and beyond using the 2D hydro code VULCAN-2D [@liv93]. This total mass of $8.1\times10^{-5}\,{\ensuremath{M_{\odot}}}$ is refered as the total computed envelope mass. Using same radial zoning in the 1D grid and in its 2D counterpart, the models preserve hydrostatic equilibrium, accurate to better than one part in ten thousand. Since the configurations are unstable, non radial velocity components develop very quickly from the small round-off errors of the code, without introducing any artificial initial perturbation.
Further computational details of the 2D simulations are as follows. The inner boundary is fixed, with assumed zero inward luminosity. The outer boundary follows the expansion of the envelope taking advantage of the arbitrary Lagrangian-Eulerian (ALE) semi-Lagrangian option of the VULCAN code whereas the burning regions of the grid at the base of the hydrogen rich envelope are purely Eulerian. More details are presented in Glasner et al. (2005, 2007). The flexibility of the ALE grid enables us to model the burning zones at the bottom of the hydrogen rich envelope with very delicate zones in spite of the post-runaway radial expansion of the outer layers. The typical computational cell at the base of the envelope, where most of the burning takes place, is a rectangular cell with dimensions of about $ 1.4 km \times 1.4 km $ . Reflecting boundary conditions are imposed at the lateral boundaries of the grid. Gravity is taken into account as a point source with the mass of the core, and the self gravity of the envelope is ignored. The reaction network includes 15 elements essential for the hydrogen burning in the CNO cycle, it includes the isotopes: H, He, He Be, B, C, C, N, N, N, O, O, O , O and F.
Results
=======
In order to compare with 1D models and with previous studies we present here five basic configurations:
1\) The outburst of the 1D original model without any overshoot mixing.
2\) An up to date model with an underlying C-O layer.
3\) A model with a Helium underlying layer.
4\) A model with an underlying O(Ne) layer.
5\) A toy model with underlying Mg.
This model demonstrates the effects of possible mixing of hydrogen with $^{24}$Mg on the runaway. (In a realistic model the amounts of Mg in the core are expected to be a few percents ([@GpGb01; @siess06]), but higher amounts can be found in the very outer layers of the core ([@berro94] ).
The computed models are listed in Table \[tab:models\]. In the next sections we present the energetics and mixing results for each of the models in the present survey.
Model $Underlying$ $T_{max}$ $Q_{max}$ $remarks$
------- -------------- ----------- ------------ ----------------------------------------
m12 - $2.05 $ $ 4.0 $ 1D
m12ad CO $2.45 $ $ 1000.0 $ -
m12ag He $ - $ $ - $ -
m
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: 'We analyze heat and charge transport through a single-level quantum dot coupled to two BCS superconductors at different temperatures to first order in the tunnel coupling. In order to describe the system theoretically, we extend a real-time diagrammatic technique that allows us to capture the interplay between superconducting correlations, strong Coulomb interactions and nonequilibrium physics. We find that a thermoelectric effect can arise due to the superconducting proximity effect on the dot. In the nonlinear regime, the thermoelectric current can also flow at the particle-hole symmetric point due to a level renormalization caused by virtual tunneling between the dot and the leads. The heat current through the quantum dot is sensitive to the superconducting phase difference. In the nonlinear regime, the system can act as a thermal diode.'
author:
- Mathias Kamp
- Björn Sothmann
title: 'Phase-dependent heat and charge transport through superconductor-quantum dot hybrids'
---
\[sec:intro\]Introduction
=========================
Understanding, manipulating and managing heat flows at the nanoscale is of crucial importance for modern electronics where Joule heating constitutes a major nuisance in the operation of computer chips. Heat transport can occur via electrons [@giazotto_opportunities_2006], phonons [@li_colloquium:_2012] and photons [@meschke_single-mode_2006; @ronzani_tunable_2018]. A promising direction to achieve control over thermal transport by electrons is phase-coherent caloritronics [@martinez-perez_coherent_2014; @fornieri_towards_2017] in superconducting circuits. Phase-coherent caloritronics is based on the observation that not only the charge current depends on the phase difference across the junction via the Josephson effect [@josephson_possible_1962] but that also the heat current is sensitive to the phase difference [@maki_entropy_1965; @maki_entropy_1966; @guttman_phase-dependent_1997; @guttman_thermoelectric_1997; @guttman_interference_1998; @zhao_phase_2003; @zhao_heat_2004]. The phase-dependent contribution to the heat current arises from Andreev like processes where an incident electronlike quasiparticle above the superconducting gap is reflected as a holelike quasi particle and vice versa.
Recently, phase-coherent heat transport in superconducting circuits has been observed experimentally [@giazotto_josephson_2012]. The possibility to control heat currents via magnetic fields has led to a number of proposals for phase-coherent caloritronic devices such as heat interferometers [@giazotto_phase-controlled_2012; @martinez-perez_fully_2013] and diffractors [@giazotto_coherent_2013; @guarcello_coherent_2016], thermal rectifiers [@giazotto_thermal_2013; @martinez-perez_efficient_2013; @fornieri_normal_2014; @fornieri_electronic_2015], transistors [@giazotto_proposal_2014; @fornieri_negative_2016], switches [@sothmann_high-efficiency_2017] and circulators [@hwang_phase-coherent_2018], thermometers [@giazotto_ferromagnetic-insulator-based_2015; @guarcello_non-linear_2018] as well as heat engines [@marchegiani_self-oscillating_2016; @hofer_autonomous_2016; @vischi_coherent_2018] and refrigerators [@solinas_microwave_2016; @marchegiani_-chip_2017]. Experimentally, heat interferometers [@giazotto_josephson_2012; @fornieri_nanoscale_2016; @fornieri_0_2017], the quantum diffraction of heat [@martinez-perez_quantum_2014], thermal diodes [@martinez-perez_rectification_2015] and a thermal router [@timossi_phase-tunable_2018] have been realized so far. Apart from potential applications in caloritronic and thermal logic [@paolucci_phase-tunable_2018], phase-coherent heat transport can also serve as a diagnostic tool that allows one, e.g., to probe the existence of topological Andreev bound states [@sothmann_fingerprint_2016].
![\[fig:model\]Schematic sketch of our setup. A single-level quantum dot is tunnel coupled to two superconducting electrodes at temperatures $T_\text{L}$ and $T_\text{R}$.](Systemsetup.pdf){width="\columnwidth"}
So far, the theoretical and experimental investigation of phase-coherent heat transport has been restricted to systems such as tunnel barriers and point contacts where the effects of electron-electron interactions can be neglected. While such setups already offer a lot of interesting physics, this raises the question of how Coulomb interactions can affect phase-dependent heat currents. In this paper, we address this important question by analyzing phase-coherent heat and charge transport through a thermally biased hybrid structure consisting of a strongly interacting single-level quantum dot tunnel coupled to superconducting electrodes, cf. Fig. \[fig:model\].
Superconductor-quantum dot hybrids have received a lot of attention, see Ref. [@de_franceschi_hybrid_2010] and [@martin-rodero_josephson_2011] for recent reviews on experiments and theory, respectively. In particular, there are investigations of the Josephson effect through quantum dots [@van_dam_supercurrent_2006; @jarillo-herrero_quantum_2006; @jorgensen_critical_2007; @baba_superconducting_2015; @szombati_josephson_2016; @probst_signatures_2016], multiple Andreev reflections [@levy_yeyati_resonant_1997; @buitelaar_multiple_2003; @cuevas_full_2003; @nilsson_supercurrent_2011; @rentrop_nonequilibrium_2014; @hwang_hybrid_2016], the interplay between superconducting correlations and the Kondo effect [@clerk_loss_2000; @buitelaar_quantum_2002; @avishai_superconductor-quantum_2003; @eichler_even-odd_2007; @lopez_josephson_2007; @karrasch_josephson_2008], the generation of unconventional superconducting correlations in quantum dots [@sothmann_unconventional_2014; @kashuba_majorana_2017; @weiss_odd-triplet_2017; @hwang_odd-frequency_2017], Cooper pair splitting [@recher_andreev_2001; @hofstetter_cooper_2009; @herrmann_carbon_2010; @hofstetter_finite-bias_2011; @das_high-efficiency_2012; @schindele_near-unity_2012] and the generation of Majorana fermions [@leijnse_parity_2012; @sothmann_fractional_2013; @fulga_adaptive_2013; @deng_majorana_2016]. Thermoelectric effects in superconductor-quantum dot hybrids have been studied in the absence of Coulomb interactions [@kleeorin_large_2016]. Here, we use a superconductor-quantum dot hybrid as a playground to investigate the interplay between superconductivity, strong Coulomb interactions and thermal nonequilibrium. Compared to tunnel junctions, quantum dots offer additional tunability of their level position by gate voltages. We extend a real-time diagrammatic approach [@konig_zero-bias_1996; @konig_resonant_1996; @schoeller_transport_1997; @konig_quantum_1999; @governale_real-time_2008; @governale_erratum:_2008] to describe thermally-driven transport which allows us to treat Coulomb interactions exactly and to perform a systematic expansion in the tunnel coupling between the dot and the superconducting leads. It allows for a treatment of superconducting correlations induced on the dot via the proximity effect and captures renormalization effects due to virtual tunneling which affect transport already in lowest order of perturbation theory. We evaluate charge and heat currents both in linear and nonlinear response. In particular, we find a thermoelectric effect in the vicinity of the particle-hole symmetric point which arises from the proximity effect. Furthermore, our device can act as an efficient thermal diode in nonlinear response.
The paper is organized as follows. In Sec. \[sec:model\], we introduce the model of our setup. The real-time diagrammatic transport theory used to investigate transport is introduced in Sec. \[sec:method\]. We present the results of our analysis in Sec. \[ssec:linear\] for the linear and in Sec. \[ssec:nonlinear\] for the nonlinear transport regime. Conclusions are drawn in Sec. \[sec:conclusion\].
\[sec:model\]Model
==================
We consider a single-level quantum dot weakly tunnel coupled to two conventional superconducting electrodes. Both superconductors are kept at the same chemical potential $\mu=0$ but at different temperatures $T_\text{L}$ and $T_\text{R}$ resulting in a nonequilibrium situation. The system is described by the total Hamiltonian $$H=\sum_{\eta=\text{L,R}}\left(H_\eta+H_{\text{tun},\eta}\right)+H_\text{dot},$$ where
|
{
"pile_set_name": "ArXiv"
}
|
**MARKET DEPTH AND PRICE DYNAMICS: A NOTE**
FRANK H. WESTERHOFF
*University of Osnabrueck, Department of Economics*
*Rolandstrasse 8, D-49069 Osnabrueck, Germany*
*e-mail: fwesterho@oec.uni-osnabrueck.de*
Abstract: This note explores the consequences of nonlinear price impact functions on price dynamics within the chartist-fundamentalist framework. Price impact functions may be nonlinear with respect to trading volume. As indicated by recent empirical studies, a given transaction may cause a large (small) price change if market depth is low (high). Simulations reveal that such a relationship may create endogenous complex price fluctuations even if the trading behavior of chartists and fundamentalists is linear.
Keywords: Econophysics; Market Depth; Price Dynamics; Nonlinearities; Technical and Fundamental Analysis.
Introduction
============
Interactions between heterogeneous agents, so-called chartists and fundamentalists, may generate endogenous price dynamics either due to nonlinear trading rules or due to a switching between simple linear trading rules.$^{1,2}$ Overall, multi-agent models appear to be quite successful in replicating financial market dynamics.$^{3,4}$ In addition, this research direction has important applications. On the one hand, understanding the working of financial markets may help to design better investment strategies.$^{5}$ On the other hand, it may facilitate the regulation of disorderly markets. For instance, Ehrenstein shows that the imposition of a low transaction tax may stabilize asset price fluctuations.$^{6}$
Within these models, the orders of the traders typically drive the price via a log linear price impact function: Buying orders shift the price proportionally up and selling orders shift the price proportionally down. Recent empirical evidence suggests, however, that the relationship between orders and price adjustment may be nonlinear. Moreover, as reported by Farmer et al., large price fluctuations occur when market depth is low.$^{3,7}$ Following this observation, our goal is to illustrate a novel mechanism for endogenous price dynamics.
We investigate – within an otherwise linear chartist-fundamentalist setup – a price impact function which depends nonlinearly on market depth. To be precise, a given transaction yields a larger price change when market depth is low than when it is high. Simulations indicate that such a relationship may lead to complex price movements. The dynamics may be sketched as follows. The market switches back and forth between two regimes. When liquidity is high, the market is relatively stable. But low price fluctuations indicate only weak trading signals and thus the transactions of speculators decline. As liquidity decreases, the price responsiveness of a trade increases. The market becomes unstable and price fluctuations increase again.
The remainder of this note is organized as follows. Section 2 sketches the empirical evidence on price impact functions. In section 3, we present our model, and in section 4, we discuss the main results. The final section concludes.
Empirical Evidence
==================
Financial prices are obviously driven by the orders of heterogeneous agents. However, it is not clear what the true functional form of price impact is. For instance, Farmer proposes a log linear price impact function for theoretical analysis while Zhang develops a model with nonlinear price impact.$^{8,9}$ His approach is backed up by empirical research that documents a concave price impact function. According to Hasbrouck, the larger is the order size, the smaller is the price impact per trade unit.$^{10}$ Also Kempf and Korn, using data on DAX futures, and Plerou et al., using data on the 116 most frequently traded US stocks, find that the price impact function displays a concave curvature with increasing order size, and flattening out at larger values.$^{11,12}$ Weber and Rosenow fitted a concave function in the form of a power law and obtained an impressive correlation coefficient of 0.977.$^{13}$ For a further theoretical and empirical debate on the possible shape of the price impact function with respect to the order size see Gabaix et al., Farmer and Lillo and Plerou et al.$^{14-16}$
But these results are currently challenged by an empirical study which is crucial for this note. Farmer et al. present evidence that price fluctuations caused by individual market orders are essentially independent of the volume of the orders.$^{7}$ Instead, large price fluctuations are driven by fluctuations in liquidity, i.e. variations in the market’s ability to absorb new orders. The reason is that even for the most liquid stocks there can be substantial gaps in the order book. When such a gap exists next to the best price – due to low liquidity – even a small new order can remove the best quote and trigger a large price change. These results are supported by Chordia, Roll and Subrahmanyam who also document that there is considerable time variation in market wide liquidity and Lillo, Farmer and Mantenga who detect that higher capitalization stocks tend to have smaller price responses for the same normalized transaction size.$^{17,18}$
Note that the relation between liquidity and price impact is of direct importance to investors developing trading strategies and to regulators attempting to stabilize financial markets. Farmer et al. argue, for instance, that agents who are trying to transact large amounts should split their orders and execute them a little at a time, watching the order book, and taking whatever liquidity is available as it enters.$^{7}$ Hence, when there is a lot of volume in the market, they should submit large orders. Assuming a concave price impact function would obviously lead to quite different investment decisions. Ehrenstein, Westerhoff and Stauffer demonstrate, for instance, that the success of a Tobin tax depends on its impact on market depth.$^{19}$ Depending on the degree of the nonlinearity of the price impact function, a transaction tax may stabilize or destabilize the markets.
The Model
=========
Following Simon, agents are boundedly rational and display a rule-governed behavior.$^{20}$ Moreover, survey studies reveal that financial market participants rely strongly on technical and fundamental analysis to predict prices.$^{21,22}$ Chartists typically extrapolate past price movements into the future. Let $P$ be the log of the price. Then, their orders may be expressed as
$$D^C_t = a(P_t -P_{t-1}),$$
where $a$ is a positive reaction coefficient denoting the strength of the trading. Accordingly, technical traders submit buying orders if prices go up and vice versa. In contrast, fundamentalists expect the price to track its fundamental value. Orders from this type of agent may be written as
$$D^F_t = b(F-P_t).$$
Again, $b$ is a positive reaction coefficient, and $F$ stands for the log of the fundamental value. For instance, if the asset is overvalued, fundamentalists submit selling orders.
As usual, excess buying drives the price up and excess selling drives it down so that the price adjustment process may be formalized as
$$P_{t+1} = P_t + A_t(wD^C_t + (1-w)D^F_t),$$
where $w$ indicates the fraction of chartists and $(1-w)$ the fraction of fundamentalists. The novel idea is to base the degree of price adjustmen $A$ on a nonlinear function of the market depth.$^{23}$ Exploiting that given excess demand has a larger (smaller) impact on the price if the trading volume is low (high), one may write
$$A_t = \frac{c}{(|wD^C_t|+|(1-w) D^F_t|)^d}.$$
The curvature of $A$ is captured by $d\geq 0$, while $c>0$ is a shift parameter.
For $d=0$, the price adjustment function is log-linear.$^{1,3}$ In that case, the law of motion of the price, derived from combining (1) to (4), is a second-order linear difference equation which has a unique steady state at
$$P_{t+1} = P_t = P_{t-1} = F.$$
Rewriting Schur’s stability conditions, the fixed point is stable for
$$0<c<\left\{\begin{array}{ll}
\displaystyle\frac{1}{aw} & \mbox{for~~} w> \displaystyle \frac{b}{4a +b}\\
\displaystyle \frac{2}{b(1-w)-2aw}\qquad & \mbox{else}
\end{array}.\right.$$
However, we are interested in the case where $d>0$. Combining (1)-(4) and solving for $P$ yields
$$P_{t+1} = P_t + c \frac{wa(P_t - P_{t-1}) + (1-w)
b(F-P_t)}{(|wa(P_t-P_{t-1})|+|(1-w)b(F-P_t)|)^d},$$
which is a two-dimensional nonlinear difference equation. Since (7) precludes closed analysis, we simulate the dynamics to demostrate that the underlying structure gives rise to endogenous deterministic motion.
Some Results
============
Figure 1 contains three bifurcation diagrams for $0<d<1$ and $w=0.7$ (top), $w=0.5$ (central) and $w=0.3
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: 'Directed graphical models provide a useful framework for modeling causal or directional relationships for multivariate data. Prior work has largely focused on identifiability and search algorithms for directed acyclic graphical (DAG) models. In many applications, feedback naturally arises and directed graphical models that permit cycles occur. In this paper we address the issue of identifiability for general directed cyclic graphical (DCG) models satisfying the Markov assumption. In particular, in addition to the faithfulness assumption which has already been introduced for cyclic models, we introduce two new identifiability assumptions, one based on selecting the model with the fewest edges and the other based on selecting the DCG model that entails the maximum number of d-separation rules. We provide theoretical results comparing these assumptions which show that: (1) selecting models with the largest number of d-separation rules is strictly weaker than the faithfulness assumption; (2) unlike for DAG models, selecting models with the fewest edges does not necessarily result in a milder assumption than the faithfulness assumption. We also provide connections between our two new principles and minimality assumptions. We use our identifiability assumptions to develop search algorithms for small-scale DCG models. Our simulation study supports our theoretical results, showing that the algorithms based on our two new principles generally out-perform algorithms based on the faithfulness assumption in terms of selecting the true skeleton for DCG models.'
bibliography:
- 'reference\_DCG.bib'
---
[****]{}
--------------------------------------------- --
Gunwoong Park$^1$Garvesh Raskutti$^{1,2,3}$
--------------------------------------------- --
----------------------------------------------------------------------
$^1$ Department of Statistics, University of Wisconsin-Madison
$^2$ Department of Computer Science, University of Wisconsin-Madison
$^3$ Wisconsin Institute for Discovery, Optimization Group
----------------------------------------------------------------------
**Keywords:** Directed graphical Models, Identifiability, Faithfulness, Feedback loops.
Introduction {#SecInt}
============
A fundamental goal in many scientific problems is to determine causal or directional relationships between variables in a system. A well-known framework for representing causal or directional relationships are directed graphical models. Most prior work on directed graphical models has focused on directed acyclic graphical (DAG) models, also referred to as Bayesian networks which are directed graphical models with no directed cycles. One of the core problems is determining the underlying DAG $G$ given the data-generating distribution $\mathbb{P}$.
A fundamental assumption in the DAG framework is the *causal Markov condition* (CMC) (see e.g., [@lauritzen1996graphical; @Spirtes2000]). While the CMC is broadly assumed, in order for a directed graph $G$ to be identifiable based on the distribution $\mathbb{P}$, additional assumptions are required. For DAG models, a number of identifiability and minimality assumptions have been introduced [@Glymour1987; @Spirtes2000] and the connections between them have been discussed [@Zhang2013]. In particular, one of the most widely used assumptions for DAG models is the *causal faithfulness condition* (CFC) which is sufficient for many search algorithms. However the CFC has been shown to be extremely restrictive, especially in the limited data setting [@Uhler2013]. In addition two minimality assumptions, the P-minimality and SGS-minimality assumptions have been introduced. These conditions are weaker than the CFC but do not guarantee model identifiability [@Zhang2013]. On the other hand, the recently introduced sparsest Markov representation (SMR) and frugality assumptions [@forster2015frugal; @Raskutti2013; @van2013ell] provide an alternative that is milder than the CFC and is sufficient to ensure identifiability. The main downside of the [SMR]{} and frugality assumptions relative to the CFC is that the [SMR]{} and frugality assumptions are sufficient conditions for model identifiability only when exhaustive searches over the DAG space are possible [@Raskutti2013], while the CFC is sufficient for polynomial-time algorithms [@Glymour1987; @Spirtes1991; @Spirtes2000] for learning equivalence class of sparse graphs.
While the DAG framework is useful in many applications, it is limited since feedback loops are known to often exist (see e.g., [@Richardson1996; @Richardson1995]). Hence, directed graphs with directed cycles [@Spirtes2000] are more appropriate to model such feedback. However learning directed cyclic graphical (DCG) models from data is considerably more challenging than learning DAG models [@Richardson1996; @Richardson1995] since the presence of cycles poses a number of additional challenges and introduces additional non-identifiability. Consequently there has been considerably less work focusing on directed graphs with feedback both in terms of identifiability assumptions and search algorithms. [@Spirtes1995] discussed the CMC, and [@Richardson1996; @Richardson1995] discussed the CFC for DCG models and introduced the polynomial-time cyclic causal discovery (CCD) algorithm [@Richardson1996] for recovering the Markov equivalence class for DCGs. Recently, [@claassen2013learning] introduced the FCI$+$ algorithm for recovering the Markov equivalence class for sparse DCGs, which also assumes the CFC. As with DAG models, the CFC for cyclic models is extremely restrictive since it is more restrictive than the CFC for DAG models. In terms of learning algorithms that do not require the CFC, additional assumptions are typically required. For example [@mooij2011causal] proved identifiability for bivariate Gaussian cyclic graphical models with additive noise which does not require the CFC while many approaches have been studied for learning graphs from the results of interventions on the graph (e.g., [@hyttinen2010causal; @hyttinen2012causal; @hyttinen2012learning; @hyttinen2013experiment; @hyttinen2013discovering]). However, these additional assumptions are often impractical and it is often impossible or very expensive to intervene many variables in the graph. This raises the question of whether milder identifiability assumptions can be imposed for learning DCG models.
In this paper, we address this question in a number of steps. Firstly, we adapt the [SMR]{} and frugality assumptions developed for DAG models to DCG models. Next we show that unlike for DAG models, the adapted [SMR]{} and frugality assumptions are not strictly weaker than the CFC. Hence we consider a new identifiability assumption based on finding the Markovian DCG entailing the maximum number of d-separation rules (MDR) which we prove is strictly weaker than the CFC and recovers the Markov equivalence class for DCGs for a strict superset of examples compared to the CFC. We also provide a comparison between the [MDR]{}, [SMR]{} and frugality assumptions as well as the minimality assumptions for both DAG and DCG models. Finally we use the [MDR]{} and [SMR]{} assumptions to develop search algorithms for small-scale DCG models. Our simulation study supports our theoretical results by showing that the algorithms induced by both the [SMR]{} and [MDR]{} assumptions recover the Markov equivalence class more reliably than state-of-the art algorithms that require the CFC for DCG models. We point out that the search algorithms that result from our identifiability assumptions require exhaustive searches and are not computationally feasible for large-scale DCG models. However, the focus of this paper is to develop the weakest possible identifiability assumption which is of fundamental importance for directed graphical models.
The remainder of the paper is organized as follows: Section \[SecPriorWork\] provides the background and prior work for identifiability assumptions for both DAG and DCG models. In Section \[SecSMRFrugality\] we adapt the [SMR]{} and frugality assumptions to DCG models and provide a comparison between the [SMR]{} assumption, the CFC, and the minimality assumptions. In Section \[SecMaxDSep\] we introduce our new [MDR]{} principle, finding the Markovian DCG that entails the maximum number of d-separation rules and provide a comparison of the new principle to the CFC, [SMR]{}, frugality, and minimality assumptions. Finally in Section \[SecSimulation\], we use our identifiability assumptions to develop a search algorithm for learning small-scale DCG models, and provide a simulation study that is consistent with our theoretical results.
Prior work on directed graphical models {#SecPriorWork}
=======================================
In this section, we introduce the basic concepts of directed graphical models pertaining to model identifiability. A directed graph $G = (V,E)$ consists of a set of vertices $V$ and a set of directed edges $E$. Suppose that $V=\{1,2,\dots ,p\}$ and there exists a random vector $(X_1, X_2,\cdots,X_p)$ with probability distribution $\mathbb{P}$ over the vertices in $G$. A directed edge from a vertex $j$ to $k$ is denoted by $(j,k)$ or $j\to k$. The set $\mbox{pa}(k)$ of *parents* of a vertex $k$ consists of all nodes $j$ such that $(j,k)\in E$. If there is a directed path $j\to \cdots \to k$,
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: 'Franson’s Bell experiment with energy-time entanglement \[Phys. Rev. Lett. [**62**]{}, 2205 (1989)\] does not rule out all local hidden variable models. This defect can be exploited to compromise the security of Bell inequality-based quantum cryptography. We introduce a novel Bell experiment using genuine energy-time entanglement, based on a novel interferometer, which rules out all local hidden variable models. The scheme is feasible with actual technology.'
author:
- Adán Cabello
- Alessandro Rossi
- Giuseppe Vallone
- Francesco De Martini
- Paolo Mataloni
title: 'Proposed Bell Experiment with Genuine Energy-Time Entanglement'
---
Two particles exhibit “energy-time entanglement” when they are emitted at the same time in an energy-conserving process and the essential uncertainty in the time of emission makes undistinguishable two alternative paths that the particles can take. Franson [@Franson89] proposed an experiment to demonstrate the violation of local realism [@Bell64] using energy-time entanglement, based on a formal violation of the Bell Clauser-Horne-Shimony-Holt (CHSH) inequality [@CHSH69]. However, Aerts [*et al.*]{} [@AKLZ99] showed that, even in the ideal case of perfect preparation and perfect detection efficiency, there is a local hidden variable (LHV) model that simulates the results predicted by quantum mechanics for the experiment proposed by Franson [@Franson89]. This model proves that “the Franson experiment does not and cannot violate local realism” and that “\[t\]he reported violations of local realism from Franson experiments [@KVHNC90] have to be reexamined” [@AKLZ99].
Despite this fundamental deficiency, and despite that this defect can be exploited to create a Trojan horse attack in Bell inequality-based quantum cryptography [@Larsson02], Franson-type experiments have been extensively used for Bell tests and Bell inequality-based quantum cryptography [@TBZG00], have become standard in quantum optics [@Paul04; @GC08], and an extended belief is that “the results of experiments with the Franson experiment violate Bell’s inequalities” [@GC08]. This is particularly surprising, given that recent research has emphasized the fundamental role of a (loophole-free) violation of the Bell inequalities in proving the device-independent security of key distribution protocols [@Ekert91], and in detecting entanglement [@HGBL05].
Polarization entanglement can be transformed into energy-time entanglement [@Kwiat95]. However, to our knowledge, there is no single experiment showing a violation of the Bell-CHSH inequality using genuine energy-time entanglement (or “time-bin entanglement” [@BGTZ99]) that cannot be simulated by a LHV model. By “genuine” we mean not obtained by transforming a previous form of entanglement, but created because the essential uncertainty in the time of emission makes two alternative paths undistinguishable.
Because of the above reasons, a single experiment using energy-time entanglement able to rule out all possible LHV models is of particular interest. The aim of this Letter is to describe such an experiment by means of a novel interferometric scheme. The main purpose of the new scheme is not to compete with existing interferometers used for quantum communication in terms of practical usability, but to fix a fundamental defect common to all of them.
We will first describe the Franson Bell-CHSH experiment. Then, we will introduce a LHV model reproducing any conceivable violation of the Bell-CHSH inequality. The model underlines why a Franson-type experiment does not and cannot be used to violate local realism. Then, we will introduce a new two-photon energy-time Bell-CHSH experiment that avoids these problems and can be used for a conclusive Bell test.
[*The Franson Bell-CHSH experiment.—*]{}The setup of a Franson Bell-CHSH experiment is in Fig. \[Fig1\]. The source emits two photons, photon $1$ to the left and photon $2$ to the right. Each of them is fed into an unbalanced interferometer. $BS_i$ are beam splitters and $M_i$ are perfect mirrors. There are two distant observers, Alice on the left and Bob on the right. Alice randomly chooses the phase of the phase shifter $\phi_A$ between $A_0$ and $A_1$, and records the counts in each of her detectors (labeled $a=+1$ and $a=-1$), the detection times, and the phase settings at $t_D-t_I$, where $t_D$ is the detection time and $t_I$ is the time the photon takes to reach the detector from the location of the phase shifter $\phi_A$. Similarly, Bob chooses $\phi_B$ between $B_0$ and $B_1$, and records the counts in each of his detectors (labeled $b=+1$ and $b=-1$), the detection times, and the phase settings. The setup must satisfy four requirements: (I) To have two-photon interference, the emission of the two photons must be simultaneous, the moment of emission unpredictable, and both interferometers identical. If the detections of the two photons are coincident, there is no information about whether both photons took the short paths $S$ or both took the long paths $L$. A simultaneous random emission is achieved in actual experiments by two methods, both based on spontaneous parametric down conversion. In energy-time experiments, a non-linear crystal is pumped continuously by a monochromatic laser so the moment of emission is unpredictable in a temporal window equal to the coherence time of the pump laser. In time-bin experiments, a non-linear crystal is pumped by pulses previously passing through an unbalanced interferometer, so it is the uncertainty of which pulse, the earlier or the later, has caused the emission what provokes the uncertainty in the emission time. In both cases, the simultaneity of the emission is guaranteed by the conservation of energy. (II) To prevent single-photon interference, the difference between paths $L$ and $S$, i.e., twice the distance between $BS1$ and $M1$, $\Delta {\cal L}=2 d(BS1,M1)$ (See Fig. \[Fig1\]), must satisfy $\Delta {\cal L} > c t_{\rm coh}$, where $c$ is the speed of light and $t_{\rm coh}$ is the coherence time of the photons. (III) To make distinguishable those events where one photon takes $S$ and the other takes $L$, $\Delta {\cal
L}$ must satisfy $\Delta {\cal L} > c \Delta t_{\rm coinc}$, where $\Delta t_{\rm coinc}$ is the duration of the coincidence window. (IV) To prevent that the local phase setting at one side can affect the outcome at the other side, the local phase settings must randomly switch ($\phi_A$ between $A_0$ and $A_1$, and $\phi_B$ between $B_0$ and $B_1$) with a frequency of the order $c/D$, where $D=d({\rm Source},BS1)$.
The observers record all their data locally and then compare them. If the detectors are perfect they find that
$$\begin{aligned}
P(A_i=+1)=P(A_i=-1)=\frac{1}{2}, \label{Amarginal} \\
P(B_j=+1)=P(B_j=-1)=\frac{1}{2}, \label{Bmarginal}\end{aligned}$$
for $i,j \in \{0,1\}$. $P(A_0=+1)$ is the probability of detecting a photon in the detector $a=+1$ if the setting of $\phi_A$ was $A_0$. They also find $25\%$ of two-photon events in which photon $1$ is detected a time $\Delta {\cal L} /c$ before photon $2$, and $25\%$ of events in which photon $1$ is detected $\Delta {\cal L}/c$ after photon $2$. The observers reject this $50\%$ of events and keep the $50\%$ that are coincident. For these selected events, quantum mechanics predicts that $$P(A_i=a, B_j=b)=\frac{1}{4}\left[1+ab
\cos(\phi_{A_i}+\phi_{B_j})\right], \label{joint}$$ where $a,b \in \{-1,+1\}$ and $\phi_{A_i}$ ($\phi_{B_j}$) is the phase setting corresponding to $A_i$ ($B_j$).
The Bell-CHSH inequality is $$-2 \le \beta_{\rm CHSH} \le 2, \label{CHSH}$$ where $$\beta_{\rm CHSH} = \langle A_0 B_0 \rangle + \langle A_0 B_1 \rangle
+ \langle A_1 B_0 \rangle - \langle A_1 B_1 \rangle.$$ According to quantum mechanics, the maximal violation of the Bell-CHSH inequality is $\beta_{\rm CHSH} = 2 \sqrt{2}$ [@Tsirelson80], and is obtained, e.g., with $\phi_{A_0}=0$, $\phi_{A_1}=\frac{\pi}{2}$, $\phi_{B_0}=-\frac{\pi}{4}$, $\phi_{B_1}=\frac{\pi
|
{
"pile_set_name": "ArXiv"
}
|
---
author:
- 'Armeen Taeb[^1]'
- 'Arian Maleki[^2]'
- 'Christoph Studer[^3]'
- 'Richard G. Baraniuk'
bibliography:
- 'references2.bib'
title: Maximin Analysis of Message Passing Algorithms for Recovering Block Sparse Signals
---
Group sparsity; group LASSO; approximate message passing; phase transition.
Introduction
============
Background
==========
Main results
============
Proofs of the main results
==========================
[^1]: Dept. of Electrical, Computer, and Energy Engineering, University of Colorado at Boulder.
[^2]: Dept. of Statistics, Columbia University.
[^3]: Dept. of Electrical and Computer Engineering, Rice University.
|
{
"pile_set_name": "ArXiv"
}
|
[**The srank Conjecture on Schur’s $Q$-Functions**]{}
William Y. C. Chen$^{1}$, Donna Q. J. Dou$^2$,\
Robert L. Tang$^3$ and Arthur L. B. Yang$^{4}$\
Center for Combinatorics, LPMC-TJKLC\
Nankai University, Tianjin 300071, P. R. China\
$^{1}$[chen@nankai.edu.cn]{}, $^{2}$[qjdou@cfc.nankai.edu.cn]{}, $^{3}$[tangling@cfc.nankai.edu.cn]{}, $^{4}$[yang@nankai.edu.cn]{}
**Abstract.** We show that the shifted rank, or srank, of any partition $\lambda$ with distinct parts equals the lowest degree of the terms appearing in the expansion of Schur’s $Q_{\lambda}$ function in terms of power sum symmetric functions. This gives an affirmative answer to a conjecture of Clifford. As pointed out by Clifford, the notion of the srank can be naturally extended to a skew partition $\lambda/\mu$ as the minimum number of bars among the corresponding skew bar tableaux. While the srank conjecture is not valid for skew partitions, we give an algorithm to compute the srank.
**MSC2000 Subject Classification:** 05E05, 20C25
Introduction
============
The main objective of this paper is to answer two open problems raised by Clifford [@cliff2005] on sranks of partitions with distinct parts, skew partitions and Schur’s $Q$-functions. For any partition $\lambda$ with distinct parts, we give a proof of Clifford’s srank conjecture that the lowest degree of the terms in the power sum expansion of Schur’s $Q$-function $Q_{\lambda}$ is equal to the number of bars in a minimal bar tableaux of shape $\lambda$. Clifford [@cliff2003; @cliff2005] also proposed an open problem of determining the minimum number of bars among bar tableaux of a skew shape $\lambda/\mu$. As noted by Clifford [@cliff2003], this minimum number can be naturally regarded as the shifted rank, or srank, of $\lambda/\mu$, denoted $\mathrm{srank}(\lambda/\mu)$. For a skew bar tableau, we present an algorithm to generate a skew bar tableau without increasing the number of bars. This algorithm eventually leads to a bar tableau with the minimum number of bars.
Schur’s $Q$-functions arise in the study of the projective representations of symmetric groups [@schur1911], see also, Hoffman and Humphreys [@hofhum1992], Humphreys [@humphr1986], J$\rm{\acute{o}}$zefiak [@jozef1989], Morris [@morri1962; @morri1979] and Nazarov [@nazar1988]. Shifted tableaux are closely related to Schur’s $Q$-functions analogous to the role of ordinary tableaux to the Schur functions. Sagan [@sagan1987] and Worley [@worley1984] have independently developed a combinatorial theory of shifted tableaux, which includes shifted versions of the Robinson-Schensted-Knuth correspondence, Knuth’s equivalence relations, Schützenberger’s jeu de taquin, etc. The connections between this combinatorial theory of shifted tableaux and the theory of projective representations of the symmetric groups are further explored by Stembridge [@stemb1989].
Clifford [@cliff2005] studied the srank of shifted diagrams for partitions with distinct parts. Recall that the rank of an ordinary partition is defined as the number of boxes on the main diagonal of the corresponding Young diagram. Nazarov and Tarasov [@naztar2002] found an important generalization of the rank of an ordinary partition to a skew partition in their study of tensor products of Yangian modules. A general theory of border strip decompositions and border strip tableaux of skew partitions is developed by Stanley [@stanl2002], and it has been shown that the rank of a skew partition is the least number of strips to construct a minimal border strip decomposition of the skew diagram. Motivated by Stanley’s theorem, Clifford [@cliff2005] generalized the rank of a partition to the rank of a shifted partition, called srank, in terms of the minimal bar tableaux.
On the other hand, Clifford has noticed that the srank is closely related to Schur’s $Q$-function, as suggested by the work of Stanley [@stanl2002] on the rank of a partition. Stanley introduced a degree operator by taking the degree of the power sum symmetric function $p_{\mu}$ as the number of nonzero parts of the indexing partition $\mu$. Furthermore, Clifford and Stanley [@clista2004] defined the bottom Schur functions to be the sum of the lowest degree terms in the expansion of the Schur functions in terms of the power sums. In [@cliff2005] Clifford studied the lowest degree terms in the expansion of Schur’s $Q$-functions in terms of power sum symmetric functions and conjectured that the lowest degree of the Schur’s $Q$-function $Q_{\lambda}$ is equal to the srank of $\lambda$. Our first result is a proof of this conjecture.
However, in general, the lowest degree of the terms, which appear in the expansion of the skew Schur’s $Q$-function $Q_{\lambda/\mu}$ in terms of the power sums, is not equal to the srank of the shifted skew diagram of $\lambda/\mu$. This is different from the case for ordinary skew partitions and skew Schur functions. Instead, we will take an algorithmic approach to the computation of the srank of a skew partition. It would be interesting to find an algebraic interpretation in terms of Schur’s $Q$-functions.
Shifted diagrams and bar tableaux {#sect2}
=================================
Throughout this paper we will adopt the notation and terminology on partitions and symmetric functions in [@macdon1995]. A *partition* $\lambda$ is a weakly decreasing sequence of positive integers $\lambda_1\geq \lambda_2\geq \ldots\geq
\lambda_k$, denoted $\lambda=(\lambda_1, \lambda_2, \ldots,
\lambda_k)$, and $k$ is called the *length* of $\lambda$, denoted $\ell(\lambda)$. For convenience we may add sufficient 0’s at the end of $\lambda$ if necessary. If $\sum_{i=1}^k\lambda_i=n$, we say that $\lambda$ is a partition of the integer $n$, denoted $\lambda\vdash n$. For each partition $\lambda$ there exists a geometric representation, known as the Young diagram, which is an array of squares in the plane justified from the top and left corner with $\ell(\lambda)$ rows and $\lambda_i$ squares in the $i$-th row. A partition is said to be *odd* (resp. even) if it has an odd (resp. even) number of even parts. Let $\mathcal{P}^o(n)$ denote the set of all partitions of $n$ with only odd parts. We will call a partition *strict* if all its parts are distinct. Let $\mathcal
{D}(n)$ denote the set of all strict partitions of $n$. For each partition $\lambda\in \mathcal {D}(n)$, let $S(\lambda)$ be the shifted diagram of $\lambda$, which is obtained from the Young diagram by shifting the $i$-th row $(i-1)$ squares to the right for each $i>1$. For instance, Figure \[shifted diagram\] illustrates the shifted diagram of shape $(8,7,5,3,1)$.
(180,120) (10,100)[(1,0)[160]{}]{} (10,80)[(1,0)[160]{}]{} (30,60)[(1,0)[140]{}]{}(50,40)[(1,0)[100]{}]{} (70,20)[(1,0)[60]{}]{}(90,0)[(1,0)[20]{}]{}
(10,80)[(0,1)[20]{}]{} (30,60)[(0,1)[40]{}]{}(50,40)[(0,1)[60]{}]{}
(70,20)[(0,1)[80]{}]{}(90,0)[(0,1)[100]{}]{} (110,0)[(0,1)[100]{}]{}(130,20)[(0,1)[80]{}]{} (150,40)[(0,1)[60]{}]{}(170,60)[(0,1)[40]{}]{}
Given two partitions $\lambda$ and $\mu$, if for each $i$ we have $\lambda_i\geq \mu_i$, then the skew partition $\lambda/\mu$ is defined to be the diagram obtained from the diagram of $\lambda$ by removing the diagram of $\mu$ at the top-left corner. Similarly, the skew shifted diagram $S(\lambda/\mu)$ is defined as the set-theoretic difference of $S(\lambda)$ and $S(\mu)$.
Now we recall the definitions of bars and bar tableaux as given in Hoffman and Humphreys [@hofhum1992]. Let $\lambda\in \mathcal
{D}(n)$ be a partition with length $\ell(\lambda)=k$. Fixing an odd positive integer $r$, three subsets $I_{+}, I_{0}, I_{-}$ of integers between $1$ and $k$ are defined as follows: $$\begin{aligned}
I_{+}& = &\{i: \lambda_{j+1}<\lambda_i-r<\lambda_j\: \mbox{for
some }
j
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: 'We give a detailed analysis of the proportion of elements in the symmetric group on $n$ points whose order divides $m$, for $n$ sufficiently large and $m\geq n$ with $m=O(n)$.'
address: |
School of Mathematics and Statistics,\
University of Western Australia,\
Nedlands, WA 6907\
Australia.
author:
- 'Alice C. Niemeyer'
- 'Cheryl E. Praeger'
date: '31 March 2006.'
title: On Permutations of Order Dividing a Given Integer
---
Introduction
============
The study of orders of elements in finite symmetric groups goes back at least to the work of Landau [@Landau09 p. 222] who proved that the maximum order of an element of the symmetric group $S_n$ on $n$ points is $e^{(1+o(1))(n\log n)^{1/2}}$. Erdős and Turán took a probabilistic approach in their seminal work in the area, proving in [@ErdosTuran65; @ErdosTuran67] that, for a uniformly distributed random element $g\in S_n$, the random variable $\log|g|$ is normally distributed with mean $(1/2) \log^2n$ and standard deviation $\frac{1}{\sqrt{3}} \log^{3/2}(n)$. Thus most permutations in $S_n$ have order considerably larger than $O(n)$. Nevertheless, permutations of order $O(n)$, that is, of order at most $cn$ for some constant $c$, have received some attention in the literature. Let $P(n,m)$ denote the proportion of permutations $g\in S_n$ which satisfy $g^m = 1$, that is to say, $|g|$ divides $m$. In 1952 Chowla, Herstein and Scott [@Chowlaetal52] found a generating function and some recurrence relations for $P(n,m)$ for $m$ fixed, and asked for its asymptotic behaviour for large $n$. Several years later, Moser and Wyman [@MoserWyman55; @MoserWyman56] derived an asymptotic for $P(n,m)$, for a fixed prime number $m$, expressing it as a contour integral. Then in 1986, Wilf [@Wilf86] obtained explicitly the limiting value of $P(n,m)$ for an arbitrary fixed value of $m$ as $n\rightarrow\infty$, see also the paper [@Volynets] of Volynets. Other authors have considered equations $g^m=h$, for a fixed integer $m$ and $h\in S_n$, see [@BouwerChernoff85; @GaoZha; @MineevPavlov76a; @MineevPavlov76b].
However in many applications, for example in [@Bealsetal03], the parameters $n$ and $m$ are linearly related, so that $m$ is unbounded as $n$ increases. For the special case where $m=n$, Warlimont [@Warlimont78] showed in 1978 that most elements $g\in S_n$ satisfying $g^n=1$ are $n$-cycles, namely he proved that $P(n,n)$, for $n$ sufficiently large, satisfies $$\frac{1}{n} + \frac{2c}{n^2} \le P(n,n) \le \frac{1}{n} + \frac{2c}{n^2} +
O\left(\frac{1}{n^{3-o(1)}}\right)$$ where $c =1$ if $n$ is even and $c=0$ if $n$ is odd. Note that the proportion of $n$-cycles in $S_n$ is $1/n$ and, if $n$ is even, the proportion of elements that are a product of two cycles of length $n/2$ is $2/n^2$. Warlimont’s result proves in particular that most permutations satisfying $g^n=1$ are $n$-cycles. More precisely it implies that the conditional probability that a random element $g\in S_n$ is an $n$-cycle, given that $g^n
=1$, lies between $1-2c n^{-1} - O(n^{-2+o(1)})$ and $1-2c n^{-1} +
O(n^{-2})$.
The main results of this paper, Theorems \[leadingterms\] and \[bounds\], generalise Warlimont’s result, giving a detailed analysis of $P(n,m)$ for large $n$, where $m=O(n)$ and $m\geq n$. For this range of values of $n$ and $m$, we have $rn\leq m<(r+1)n$ for some positive integer $r$, and we analyse $P(n,m)$ for $m$ in this range, for a fixed value of $r$ and $n\rightarrow\infty$. It turns out that the kinds of elements that make the largest contribution to $P(n,m)$ depend heavily on the arithmetic nature of $m$, for example, on whether $m$ is divisible by $n$ or by $r+1$. We separate out several cases in the statement of our results. Theorem \[leadingterms\] deals with two cases for which we give asymptotic expressions for $P(n,m)$. The first of these reduces in the case $m=n$ to Warlimont’s theorem [@Warlimont78] (modulo a small discrepancy in the error term). For other values of $m$ lying strictly between $rn$ and $(r+1)n$ we obtain in Theorem \[bounds\] only an upper bound for $P(n,m)$, since the exact value depends on both the arithmetic nature and the size of $m$ (see also Remark \[remark:leadinterms\]).
\[leadingterms\] Let $n$ and $r$ be positive integers. Then for a fixed value of $r$ and sufficiently large $n$, the following hold.
1. $\displaystyle{
P(n,rn)=\frac{1}{n}+\frac{c(r)}{n^2}
+O\left(\frac{1}{n^{2.5-o(1)}}\right)
}$ where $c(r)=\sum
(1+\frac{i+j}{2r})$ and the sum is over all pairs $(i,j)$ such that $1\leq i,j\leq r^2,
ij =r^2,$ and both $r+i, r+j$ divide $rn$. In particular $c(1)=0$ if $n$ is odd, and $2$ if $n$ is even.
2. If $r=t!-1$ and $m=t!(n-t)=(r+1)n-t\cdot t!$, then $$P(n,m)=\frac{1}{n}+\frac{t+c'(r)}{n^2}+O\left(\frac{1}{n^{2.5-o(1)}}
\right)$$ where $c'(r)=\sum(1+\frac{i+j-2}{2(r+1)})$ and the sum is over all pairs $(i,j)$ such that $1< i,j\leq (r+1)^2,
(i-1)(j-1) =(r+1)^2,$ and both $r+i, r+j$ divide $m$.
\[bounds\] Let $n,m,r$ be positive integers such that $rn< m<(r+1)n$, and ${{\delta}}$ a real number such that $0<{{\delta}}\leq 1/4$. Then for a fixed value of $r$ and sufficiently large $n$, $$P(n,m)\leq \frac{\alpha.(r+1)}{m}+\frac{k(r)}
{n^2}+ O\left(\frac{1}{n^{2.5-2{{\delta}}}}\right)$$where $k(r) = \frac{4(r+3)^4}{r^2}$ and $$\alpha=\left\{\begin{array}{ll}
1&\mbox{if $r+1$ divides $m$ and $n-\frac{m}{r+1}
< \frac{m}{2(r+1)(r+2)-1}$}\\
0&\mbox{otherwise.}
\end{array}\right.$$
\[remark:leadinterms\]
\(a) In Theorem \[leadingterms\](a), the leading term $1/n$ is the proportion of $n$-cycles, while the proportion of permutations containing an $(n-t)$-cycle is $\frac{1}{n-t} = \frac{1}{n} +
\frac{t}{n^2} + O(\frac{1}{n^3})$, which contributes to the first two terms in Theorem \[leadingterms\](b). The terms $\frac{c(r)}{n^2}$ and $\frac{c'(r)}{n^2}$ correspond to permutations in $S_n$ that have two long cycles, and these have lengths $\frac{m}
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: 'This paper introduces a novel feature detector based only on information embedded inside a CNN trained on standard tasks (e.g. classification). While previous works already show that the features of a trained CNN are suitable descriptors, we show here how to extract the feature locations from the network to build a detector. This information is computed from the gradient of the feature map with respect to the input image. This provides a saliency map with local maxima on relevant keypoint locations. Contrary to recent CNN-based detectors, this method requires neither supervised training nor finetuning. We evaluate how repeatable and how ‘matchable’ the detected keypoints are with the repeatability and matching scores. Matchability is measured with a simple descriptor introduced for the sake of the evaluation. This novel detector reaches similar performances on the standard evaluation HPatches dataset, as well as comparable robustness against illumination and viewpoint changes on Webcam and photo-tourism images. These results show that a CNN trained on a standard task embeds feature location information that is as relevant as when the CNN is specifically trained for feature detection.'
author:
- Assia Benbihi
- Matthieu Geist
- 'C[é]{}dric Pradalier'
bibliography:
- '../egbib.bib'
title: 'ELF: Embedded Localisation of Features in pre-trained CNN'
---
Introduction
============
![(1-6) Embedded Detector: Given a CNN trained on a standard vision task (classification), we backpropagate the feature map back to the image space to compute a saliency map. It is thresholded to keep only the most informative signal and keypoints are the local maxima. (7-8): simple-descriptor.[]{data-label="fig:pipeline"}](img.png){width="\linewidth"}
Feature extraction, description and matching is a recurrent problem in vision tasks such as Structure from Motion (SfM), visual SLAM, scene recognition and image retrieval. The extraction consists in detecting image keypoints, then the matching pairs the nearest keypoints based on their descriptor distance. Even though hand-crafted solutions, such as SIFT [@lowe2004distinctive], prove to be successful, recent breakthroughs on local feature detection and description rely on supervised deep-learning methods [@detone18superpoint; @ono2018lf; @yi2016lift]. They detect keypoints on saliency maps learned by a Convolutional Neural Network (CNN), then compute descriptors using another CNN or a separate branch of it. They all require strong supervision and complex training procedures: [@yi2016lift] requires ground-truth matching keypoints to initiate the training, [@ono2018lf] needs the ground-truth camera pose and depth maps of the images, [@detone18superpoint] circumvents the need for ground-truth data by using synthetic one but requires a heavy domain adaptation to transfer the training to realistic images. All these methods require a significant learning effort. In this paper, we show that a trained network already embeds enough information to build State-of-the-Art (SoA) detector and descriptor.
The proposed method for local feature detection needs only a CNN trained on standard task, such as ImageNet [@deng2009imagenet] classification, and no further training. The detector, dubbed ELF, relies on the features learned by such a CNN and extract their locations from the feature map gradients. Previous work already highlights that trained CNN features are relevant descriptors [@fischer2014descriptor] and recent works [@balntas2016learning; @han2015matchnet; @simo2015discriminative] specifically train CNN to produce features suitable for keypoint description. However, no existing approach uses a pre-trained CNN for feature detection.
ELF computes the gradient of a trained CNN feature map with respect to *w.r.t* the image: this outputs a saliency map with local maxima on keypoint positions. Trained detectors learn this saliency map with a CNN whereas we extract it with gradient computations. This approach is inspired by [@simonyan2013deep] which observes that the gradient of classification scores *w.r.t* the image is similar to the image saliency map. ELF differs in that it takes the gradient of feature maps and not the classification score contrary to existing work exploiting CNN gradients [@selvaraju2017grad; @smilkov2017smoothgrad; @springenberg2015striving; @sundararajan2017axiomatic]. These previous works aim at visualising the learning signal for classification specifically whereas ELF extracts the feature locations. The extracted saliency map is then thresholded to keep only the most relevant locations and standard Non-Maxima Suppression (NMS) extracts the final keypoints (Figure \[fig:heatmap\_coco\]).
![ Saliency maps thresholding to keep only the most informative location. Top: original image. (Left-Right: Webcam [@verdie2015tilde], HPatches [@balntas2017hpatches], COCO[@lin2014microsoft]) Middle: blurred saliency maps. Bottom: saliency map after threshold. (Better seen on a computer.) []{data-label="fig:heatmap_coco"}](fig3_heatmap.png){width="\linewidth"}
ELF relies only on six parameters: 2$\times$2 Gaussian blur parameters for the automatic threshold level estimation and for the saliency map denoising; and two parameters for the (NMS) window and the border to ignore. Detection only requires one forward and one backward passes and takes $\sim$0.2s per image on a simple Quadro M2200, which makes it suitable for real-time applications.
ELF is compared to individual detectors with standard *repeatability* [@mikolajczyk2005comparison] but results show that this metric is not discriminative enough. Most of the existing detectors can extract keypoints repeated across images with similar repeatability scores. Also, this metric does not express how ‘useful’ the detected keypoints are: if we sample all pixels as keypoints, we reach 100% of *rep.* but the matching may not be perfect if many areas look alike. Therefore, the detected keypoints are also evaluated on how ‘matchable’ they are with the *matching score* [@mikolajczyk2005comparison]. This metric requires to describe the keypoints so we define a simple descriptor: it is based on the interpolation of a CNN feature map on the detected keypoints, as in [@detone18superpoint]. This avoids biasing the performance by choosing an existing competitive descriptor. Experiments show that even this simple descriptor reaches competitive results which comforts the observation of [@fischer2014descriptor], on the relevance of CNN features as descriptors. More details are provided section 4.1.
ELF is tested on five architectures: three classification networks trained on ImageNet classification: AlexNet, VGG and Xception [@krizhevsky2012imagenet; @simonyan2014very; @chollet17xception], as well as SuperPoint [@detone18superpoint] and LF-Net [@ono2018lf] descriptor networks. Although outside the scope of this paper, this comparison provides preliminary results of the influence of the network architecture, task and training data on ELF’s performance. Metrics are computed on HPatches [@balntas2017hpatches] for generic performances. We derive two auxiliary datasets from HPatches to study scale and rotation robustness. Light and 3D viewpoint robustness analysis are run on the Strecha, Webcam and datasets [@strecha2008benchmarking; @verdie2015tilde]. These extensive experiments show that ELF is on par with other sparse detectors, which suggests that the feature representation and location information learnt by a CNN to complete a vision task is as relevant as when the CNN is specifically trained for feature detection. We additionally test ELF’s robustness on 3D reconstruction from images in the context of the CVPR 2019 Image Matching challenge [@cvpr19challenge]. Once again, ELF is on par with other sparse methods even though denser methods, e.g. [@detone18superpoint], are more appropriate for such a task. Our contributions are the following:
- We show that a CNN trained on a standard vision task embeds feature location in the feature gradients. This information is as relevant for feature detection as when a CNN is specifically trained for it.
- We define a systematic method for local feature detection. Extensive experiments show that ELF is on par with other SoA deep trained detectors. They also update the previous result from [@fischer2014descriptor]: self-taught CNN features provide SoA descriptors in spite of recent improvements in CNN descriptors [@choy2016universal].
- We release the python-based evaluation code to ease future comparison together with ELF code[^1]. The introduced robustness datasets are also made public [^2].
Related work
============
Early methods rely on hand-crafted detection and description : SIFT [@lowe2004distinctive] detects 3D spatial-scale keypoints on difference of gaussians and describes them with a 3D Histogram Of Gradients (HOG). SURF [@bay2006surf] uses image integral to speed up the previous detection and uses a sum of Haar wavelet responses for description. KAZE [@alcantarilla2012kaze] extends the previous multi-scale approach by detecting features in non-linear scale spaces instead of the classic Gaussian ones. ORB [@rublee2011orb] combines the FAST [@rosten2006machine] detection, the BRIEF [@calonder2010brief] description, and improves them to make the pipeline scale and rotation invariant. MSER-based detector hand-crafts desired invariance properties for keypoints
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: 'Spermatozoa self-propel by propagating bending waves along an active elastic flagellum. The structure in the distal flagellum is likely incapable of actively bending, and as such is largely neglected. Through elastohydrodynamic modeling we show that an inactive distal region confers a significant propulsive advantage when compared with a fully active flagellum of the same length. The optimal inactive length, typically 2–5% (but up to 37% in extremes), depends on both wavenumber and viscous-elastic ratio. Potential implications in evolutionary biology and clinical assessment are discussed.'
author:
- 'Cara V. Neal'
- 'Atticus L. Hall-McNair'
- 'Meurig T. Gallagher'
- 'Jackson Kirkman-Brown'
- 'David J. Smith'
date: October 2019
title: 'Doing more with less: the flagellar end piece enhances the propulsive effectiveness of spermatozoa'
---
Spermatozoa, alongside their crucial role in sexual reproduction, are a principal motivating example of inertialess propulsion in the very low Reynolds number regime. The time-irreversible motion required for effective motility is achieved through the propagation of bending waves along the eukaryotic axoneme, which forms the active elastic internal core of the slender flagellum. While sperm morphology varies significantly between species [@austin1995evolution; @fawcett1975mammalian; @werner2008insect; @mafunda2017sperm; @nelson2010tardigrada; @anderson1975form], there are clear conserved features which can be seen in humans, most mammals, and also our evolutionary ancestors [@cummins1985mammalian]. In gross structural terms, sperm comprise (i) the head, which contains the genetic cargo; (ii) the midpiece of the flagellum, typically a few microns in length, containing the ATP-generating mitochondria; (iii) the principal piece of the flagellum, typically 40–50$\,\mu$m in length (although much longer in some species [@bjork2006intensity]), the core of which is a “9+2” axoneme, producing and propagating active bending waves through dynein-ATPase activity [@machin1958wave]; and (iv) the end piece, typically a few microns in length, which consists of singleton microtubules only [@zabeo2019axonemal]. Lacking the predominant “9+2” axonemal structure it appears unlikely that the end piece is a site of molecular motor activity. Since the end piece is unactuated, we will refer to it as ‘inactive’, noting however that this does not mean it is necessarily ineffective. Correspondingly, the actuated principal piece will be referred to as ‘active’. A detailed review of human sperm morphology can be found in [@gaffney2011mammalian; @lauga2009hydrodynamics].
While the end piece can be observed through transmission electron and atomic force microscopy [@fawcett1975mammalian; @ierardi2008afm], live imaging to determine its role in propelling the cell is currently challenging. Futhermore, because the end piece has been considered to not have a role in propelling the cell, it has received relatively little attention. However, we know that waveform has a significant impact on propulsive effectiveness, and moreover changes to the waveform have an important role in enabling cells to penetrate the highly viscous cervical mucus encountered in internal fertilization [@smith2009bend]. This leads us to ask: *does the presence of a mechanically inactive region at the end of the flagellum help or hinder the cell’s progressive motion?*
The emergence of elastic waves on the flagellum can be described by a constitutively linear, geometrically nonlinear filament, with the addition of an active moment per unit length $m$, which models the internal sliding produced by dynein activity, and a hydrodynamic term $\bm{f}$ which describes the force per unit length exerted by the filament onto the fluid. Many sperm have approximately planar waveforms, especially upon approaching and collecting at surfaces [@gallagher2018casa; @woolley2003motility]. As such, their shape can be fully described by the angle made between the tangent and the head centreline, denoted $\theta$, as shown in Fig. \[fig:sperm-schematic\]. Following [@moreau2018asymptotic; @hall2019efficient] we parameterize the filament by arclength $s$, with $s=0$ corresponds to the head-flagellum joint and $s=L^{*}$ to the distal end of the flagellum, and apply force and moment free boundary conditions at $s=L^{*}$ to get $$E(s)\,\partial_s \theta(s,t) - \bm{e}_3\cdot\int_s^{L^{*}} \partial_{s'} \bm{X}(s',t) \times \left(\int_{s'}^{L^{*}} \bm{f}(s'',t) ds''\right) ds' - \int_s^{L^{*}} m(s',t)\,ds' =0, \label{eq:elasticity0}$$ with the elastic stiffness given, following [@gaffney2011mammalian], by $$E(s)=
\begin{cases}
(E_p^*-E_d^*)\left( \frac{s-s_d^*}{s_d^*}\right)^2 + E_d^* & s \leq s_d^*, \\
E_d^* & s>s_d^*,
\end{cases}$$ where parameters $E_p^* = 8\times10^{-21}$Nm$^2$, $E_d^*=2.2\times10^{-21}\,$Nm$^2$ and $s_d^*=39\,\mu$m$=3.9\times10^{-5}\,$m have been chosen to model the tapering structure of mammalian sperm flagella and match to experimental stiffness measurements [@Lesich2004; @Lesich2008]. The position vector $\bm{X}=\bm{X}(s,t)$ describes the flagellar waveform at time $t$, so that $\partial_s\bm{X}$ is the tangent vector, and $\bm{e}_3$ is a unit vector pointing perpendicular to the plane of beating. Integrating by parts leads to the elasticity integral equation $$E(s)\,\partial_s \theta(s,t) + \bm{e}_3\cdot\int_s^{L^{*}} (\bm{X}(s',t)-\bm{X}(s,t)) \times \bm{f}(s',t) \, ds' - \int_s^{L^{*}} m(s',t)\,ds' =0. \label{eq:elasticity}$$
The active moment density can be described to a first approximation by a sinusoidal traveling wave $m(s,t)=m_0^* \cos(k^*s-\omega^* t)$, where $k^*$ is wavenumber and $\omega^*$ is radian frequency. The inactive end piece can be modeled by taking the product with a Heaviside function, so that $m(s,t) = m_0^* \cos(k^*s-\omega^* t)H(\ell^* -s)$ where $0<\ell^*\leqslant L^*$ is the length of the active tail segment.
At very low Reynolds number, neglecting non-Newtonian influences on the fluid, the hydrodynamics are described by the Stokes flow equations $$-\bm{\nabla}p + \mu^* \nabla^2\bm{u} = \bm{0}, \quad \bm{\nabla}\cdot \bm{u} = 0,$$ where $p=p(\bm{x},t)$ is pressure, $\bm{u}=\bm{u}(\bm{x},t)$ is velocity and $\mu^*$ is dynamic viscosity. These equations are augmented by the no-slip, no-penetration boundary condition ${\bm{u}(\bm{X}(s,t),t)=\partial_t\bm{X}(s,t)}$, i.e. the fluid in contact with the filament moves at the same velocity as the filament. A convenient and accurate numerical method to solve these equations for biological flow problems with deforming boundaries is based on the ‘regularized stokeslet’ [@cortez2001method; @cortez2005method], i.e. the solution to the exactly incompressible Stokes flow equations driven by a spatially-concentrated but smoothed force $$-\bm{\nabla}p + \mu^* \nabla^2\bm{u} + \psi_\varepsilon(\bm{x},\bm{y})\bm{e}_3 = 0, \quad \bm{\nabla}\cdot \bm{u} = 0,$$ where $\varepsilon\ll 1$ is a regularization parameter, $\bm{y}$ is the location of the force, $\bm{x}$ is the evaluation point and $\psi_\varepsilon$ is a smoothed approximation to a Dirac delta function. The choice $$\psi_\varepsilon(\bm{x},\bm{y})=15\varepsilon^4/r_\varepsilon^{7},$$ leads to the regularized stokeslet [@cortez2005method] $$S_{ij}^\varepsilon(\bm{x},\bm{y})=\frac{1}{8\pi\mu}\left(\frac{\delta_{ij}(r^2+2\varepsilon^2)+r_ir_j}{r_\varepsilon^3} \right) ,$$ where $r_i=x_i
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: 'This paper is to prove the asymptotic normality of a statistic for detecting the existence of heteroscedasticity for linear regression models without assuming randomness of covariates when the sample size $n$ tends to infinity and the number of covariates $p$ is either fixed or tends to infinity. Moreover our approach indicates that its asymptotic normality holds even without homoscedasticity.'
address:
- 'KLASMOE and School of Mathematics and Statistics, Northeast Normal University, Changchun, P.R.C., 130024.'
- 'School of Physical and Mathematical Sciences, Nanyang Technological University, Singapore, 637371'
- 'KLASMOE and School of Mathematics and Statistics, Northeast Normal University, Changchun, P.R.C., 130024.'
author:
- Zhidong Bai
- Guangming Pan
- Yanqing Yin
title: 'Homoscedasticity tests for both low and high-dimensional fixed design regressions'
---
[ emptyifnotempty[@addto@macro]{} @addto@macro]{} [^1]
[ emptyifnotempty[@addto@macro]{} @addto@macro]{} [^2]
[ emptyifnotempty[Corresponding author]{}[@addto@macro]{} @addto@macro]{} [^3]
Introduction
============
A brief review of homoscedasticity test
---------------------------------------
Consider the classical multivariate linear regression model of $p$ covariates $$\begin{aligned}
y_i={\mathbf}x_i{\mathbf}\beta+{\mathbf}\varepsilon_i,\ \ \ \ \ i=1,2,\cdots,n,\end{aligned}$$ where $y_i$ is the response variable, ${\mathbf}x_i=(x_{i,1},x_{i,2},\cdots,x_{i,p})$ is the $p$-dimensional covariates, $\beta={\left(}\beta_1,\beta_2,\cdots,\beta_p{\right)}'$ is the $p$ dimensional regression coefficient vector and $\varepsilon_i$ is the independent random errors obey the same distribution with zero mean and variance $\sigma_i^2$. In most applications of the linear regression models the homoscedasticity is a very important assumption. Without it, the loss in efficiency in using ordinary least squares (OLS) may be substantial and even worse, the biases in estimated standard errors may lead to invalid inferences. Thus, it is very important to examine the homoscedasticity. Formally, we need to test the hypothesis $$\label{a1}
H_0: \ \sigma_1^2=\sigma_2^2=\cdots=\sigma_n^2=\sigma^2,$$ where $\sigma^2$ is a positive constant.
In the literature there are a lot of work considering this hypothesis test when the dimension $p$ is fixed. Indeed, many popular tests have been proposed. For example Breusch and Pagan [@breusch1979simple] and White [@white1980heteroskedasticity] proposed statistics to investigate the relationship between the estimated errors and the covariates in economics. While in statistics, Dette and Munk [@dette1998estimating], Glejser [@glejser1969new], Harrison and McCabe [@harrison1979test], Cook and Weisberg [@cook1983diagnostics], Azzalini and Bowman[@azzalini1993use] proposed nonparametric statistics to conduct the hypothesis. One may refer to Li and Yao [@li2015homoscedasticity] for more details in this regard. The development of computer science makes it possible for people to collect and deal with high-dimensional data. As a consequence, high-dimensional linear regression problems are becoming more and more common due to widely available covariates. Note that the above mentioned tests are all developed under the low-dimensional framework when the dimension $p$ is fixed and the sample size $n$ tends to infinity. In Li and Yao’s paper, they proposed two test statistics in the high dimensional setting by using the regression residuals. The first statistic uses the idea of likelihood ratio and the second one uses the idea that “the departure of a sequence of numbers from a constant can be efficiently assessed by its coefficient of variation", which is closely related to John’s idea [@john1971some]. By assuming that the distribution of the covariates is ${\mathbf}N({\mathbf}0, {\mathbf}I_p)$ and that the error obey the normal distribution, the “coefficient of variation" statistic turns out to be a function of residuals. But its asymptotic distribution missed some part as indicated from the proof of Lemma 1 in [@li2015homoscedasticity] even in the random design. The aim of this paper is to establish central limit theorem for the “coefficient of variation" statistic without assuming randomness of the covariates by using the information in the projection matrix (the hat matrix). This ensures that the test works when the design matrix is both fixed and random. More importantly we prove that the asymptotic normality of this statistics holds even without homoscedasticity. That assures a high power of this test.
The structure of this paper is as follows. Section 2 is to give our main theorem and some simulation results, as well as two real data analysis. Some calculations and the proof of the asymptotic normality are presented in Section 3.
Main Theorem, Simulation Results and Real Data Analysis
=======================================================
The Main Theorem
----------------
Suppose that the parameter vector $\beta$ is estimated by the OLS estimator $$\hat{ {\beta}}={\left(}{\mathbf}X'{\mathbf}X{\right)}^{-1}{\mathbf}X'{\mathbf}Y.$$ Denote the residuals by $$\hat{{\mathbf}\varepsilon}={\left(}\hat{{\mathbf}\varepsilon_1},\hat{{\mathbf}\varepsilon_2},\cdots,\hat{{\mathbf}\varepsilon_n}{\right)}'={\mathbf}Y-{\mathbf}X\hat \beta={\mathbf}P\varepsilon,$$ with ${\mathbf}P=(p_{ij})_{n\times n}={\mathbf}I_n-{\mathbf}X({\mathbf}X'{\mathbf}X)^{-1}{\mathbf}X'$ and $\varepsilon={\left(}\varepsilon_1,\varepsilon_2,\cdots,\varepsilon_n{\right)}'$. Let ${\mathbf}D$ be an $n\times n$ diagonal matrix with its $i$-th diagonal entry being $\sigma_i$, set ${\mathbf}A=(a_{ij})_{n\times n}={\mathbf}P{\mathbf}D$ and let $\xi={\left(}\xi_1,\xi_2,\cdots,\xi_n{\right)}'$ stand for a standard $n$ dimensional random vector whose entries obey the same distribution with $\varepsilon$. It follows that the distribution of $\hat \varepsilon$ is the same as that of ${\mathbf}A\xi$. In the following, we use ${{\rm Diag}}{\left(}{\mathbf}B{\right)}={\left(}b_{1,1},b_{2,2},\cdots,b_{n,n}{\right)}'$ to stand for the vector formed by the diagonal entries of ${\mathbf}B$ and ${{\rm Diag}}'{\left(}{\mathbf}B{\right)}$ as its transpose, use ${\mathbf}D_{{\mathbf}B}$ stand for the diagonal matrix of ${\mathbf}B$, and use ${\mathbf}1$ stand for the vector ${\left(}1,1,\cdots,1{\right)}'$.
Consider the following statistic $$\label{a2}
{\mathbf}T=\frac{\sum_{i=1}^n{\left(}\hat{\varepsilon_i}^2-\frac{1}{n}\sum_{i=1}^n\hat{\varepsilon_i}^2{\right)}^2}{\frac{1}{n}{\left(}\sum_{i=1}^n\hat{\varepsilon_i}^2{\right)}^2}.$$ We below use ${\mathbf}A {\circ}{\mathbf}B$ to denote the Hadamard product of two matrices ${\mathbf}A$ and ${\mathbf}B$ and use ${\mathbf}A ^{{\circ}k}$ to denote the Hadamard product of k ${\mathbf}A$.
\[th1\] Under the condition that the distribution of $\varepsilon_1$ is symmetric, ${{\rm E}}|\varepsilon_1|^8\leq \infty$ and $p/n\to y\in [0,1)$ as $n\to \infty$, we have $$\frac{{\mathbf}T-a}{\sqrt b}\stackrel{d}{\longrightarrow}{\mathbf}N(0,1)$$
where $a$, $b$ are determined by $n$, $p$ and ${\mathbf}A$. Under $H_0$, we further have $$a={\left(}\frac{n{\left(}3{{\rm tr}}{\left(}{\mathbf}P{\circ}{\mathbf}P{\right)}+\nu_4{{\rm tr}}({\mathbf}P{\circ}{\mathbf}P)^2{\right)}}{{\left(}{\left(}n-p{\right)}^2+2{\left(}n-p{\right)}+\nu_4{{\rm tr}}({\mathbf}P{\circ}{\mathbf}P){\right)}}-1{\right)},\ b=\Delta'\Theta\Delta,$$ where $$\Delta'=(\frac{n}{{\left(}{\left(}n-p{\right)}^2+2{\left(}n-p{\right)}+\nu_4{{\rm tr}}({\mathbf}P{\circ}{\mathbf}P){\right)}},-\frac{n^2{\left(}3{{\rm tr}}{\left(
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: 'In this article we relate word and subgroup growth to certain functions that arise in the quantification of residual finiteness. One consequence of this endeavor is a pair of results that equate the nilpotency of a finitely generated group with the asymptotic behavior of these functions. The second half of this article investigates the asymptotic behavior of two of these functions. Our main result in this arena resolves a question of Bogopolski from the Kourovka notebook concerning lower bounds of one of these functions for nonabelian free groups.'
author:
- 'K. Bou-Rabee[^1] and D. B. McReynolds[^2]'
title: |
**Asymptotic growth and\
least common multiples in groups**
---
1991 MSC classes: 20F32, 20E26 .05in keywords: *free groups, hyperbolic groups, residual finiteness, subgroup growth, word growth.*
Introduction
============
The goals of the present article are to examine the interplay between word and subgroup growth, and to quantify residual finiteness, a topic motivated and described by the first author in [@Bou]. These two goals have an intimate relationship that will be illustrated throughout this article.
Our focus begins with the interplay between word and subgroup growth. Recall that for a fixed finite generating set $X$ of $\Gamma$ with associated word metric ${\left\vert \left\vert \cdot\right\vert\right\vert}_X$, word growth investigates the asymptotic behavior of the function $$\operatorname{w}_{\Gamma,X}(n) = {\left\vert{\left\{\gamma \in \Gamma~:~ {\left\vert \left\vert \gamma\right\vert\right\vert}_X \leq n\right\}}\right\vert},$$ while subgroup growth investigates the asymptotic behavior of the function $$\operatorname{s}_\Gamma(n) = {\left\vert{\left\{\Delta \lhd \Gamma~:~ [\Gamma:\Delta]\leq n\right\}}\right\vert}.$$ To study the interaction between word and subgroup growth we propose the first of a pair of questions:
**Question 1.** *What is the smallest integer $\operatorname{F}_{\Gamma,X}(n)$ such that for every word $\gamma$ in $\Gamma$ of word length at most $n$, there exists a finite index normal subgroup of index at most $\operatorname{F}_{\Gamma,X}(n)$ that fails to contain $\gamma$?*
To see that the asymptotic behavior of $\operatorname{F}_{\Gamma,X}(n)$ measures the interplay between word and subgroup growth, we note the following inequality (see Section \[Preliminary\] for a simple proof): $$\label{BasicInequality}
\log (\operatorname{w}_{\Gamma,X}(n)) \leq \operatorname{s}_\Gamma(\operatorname{F}_{\Gamma,X}(2n))\log (\operatorname{F}_{\Gamma,X}(2n)).$$ Our first result, which relies on Inequality (\[BasicInequality\]), is the following.
\[DivisibilityLogGrowth\] If $\Gamma$ is a finitely generated linear group, then the following are equivalent:
- $\operatorname{F}_{\Gamma,X}(n) \leq (\log(n))^r$ for some $r$.
- $\Gamma$ is virtually nilpotent.
For finitely generated linear groups that is not virtually nilpotent, Theorem \[DivisibilityLogGrowth\] implies $\operatorname{F}_{\Gamma,X}(n) \nleq (\log(n))^r$ for any $r >0$. For this class of groups, we can improve this lower bound. Precisely, we have the following result—see Section \[Preliminary\] for the definition of $\preceq$.
\[basiclowerbound\] Let $\Gamma$ be a group that contains a nonabelian free group of rank $m$. Then $$n^{1/3} \preceq \operatorname{F}_{\Gamma,X}(n).$$
The motivation for the proof of Theorem \[basiclowerbound\] comes from the study of $\operatorname{F}_{{\ensuremath{{\ensuremath{\mathbf{Z}}}}},X}(n)$, where the Prime Number Theorem and least common multiples provide lower and upper bounds for $\operatorname{F}_{{\ensuremath{{\ensuremath{\mathbf{Z}}}}},X}(n)$. In Section \[FreeGroupGrowth\], we extend this approach by generalizing least common multiples to finitely generated groups (a similar approach was also taken in the article of Hadad [@Hadad]). Indeed with this analogy, Theorem \[basiclowerbound\] and the upper bound of $n^3$ established in [@Bou], [@Rivin] can be viewed as a weak Prime Number Theorem for free groups since the Prime Number Theorem yields $\operatorname{F}_{\ensuremath{{\ensuremath{\mathbf{Z}}}}}(n) \simeq \log(n)$. Recently, Kassabov–Matucci [@KM] improved the lower bound of $n^{1/3}$ to $n^{2/3}$. A reasonable guess is that $\operatorname{F}_{F_m,X}(n) \simeq n$, though presently neither the upper or lower bound is known. We refer the reader to [@KM] for additional questions and conjectures.
There are other natural ways to measure the interplay between word and subgroup growth. Let $B_{\Gamma,X}(n)$ denote $n$–ball in $\Gamma$ for the word metric associated to the generating set $X$. Our second measurement is motivated by the following question—in the statement, $B_{\Gamma,X}(n)$ is the metric $n$–ball with respect to the word metric ${\left\vert \left\vert \cdot\right\vert\right\vert}_X$:
**Question 2.** *What is the cardinality $\operatorname{G}_{\Gamma,X}(n)$ of the smallest finite group $Q$ such that there exists a surjective homomorphism ${\varphi}{\ensuremath{\colon}}\Gamma \to Q$ with the property that ${\varphi}$ restricted to $B_{\Gamma,X}(n)$ is injective?*
We call $\operatorname{G}_{\Gamma,X}(n)$ the *residual girth function* and relate $\operatorname{G}_{\Gamma,X}(n)$ to $\operatorname{F}_{\Gamma,X}$ and $\operatorname{w}_{\Gamma,X}(n)$ for a class of groups containing non-elementary hyperbolic groups; Hadad [@Hadad] studied group laws on finite groups of Lie type, a problem that is related to residual girth and the girth of a Cayley graph for a finite group. Specifically, we obtain the following inequality (see Section \[FreeGroupGrowth\] for a precise description of the class of groups for which this inequality holds): $$\label{BasicGirthEquation}
\operatorname{G}_{\Gamma,X}(n/2) \leq \operatorname{F}_{\Gamma,X}{\left( 6n(\operatorname{w}_{\Gamma,X}(n))^{2} \right) }.$$ Our next result shows that residual girth functions enjoy the same growth dichotomy as word and subgroup growth—see [@gromov] and [@lubsegal-2003].
\[GirthPolynomialGrowth\] If $\Gamma$ is a finitely generated group then the following are equivalent.
- $\operatorname{G}_{\Gamma,X}(n) \leq n^r$ for some $r$.
- $\Gamma$ is virtually nilpotent.
The asymptotic growth of $\operatorname{F}_{\Gamma,X}(n)$, $\operatorname{G}_{\Gamma,X}(n)$, and related functions arise in quantifying residual finiteness, a topic introduced in [@Bou] (see also the recent articles of the authors [@BM], Hadad [@Hadad], Kassabov–Mattucci [@KM], and Rivin [@Rivin]). Quantifying residual finiteness amounts to the study of so-called divisibility functions. Given a finitely generated, residually finite group $\Gamma$, we define the *divisibility function* $\operatorname{D}_\Gamma{\ensuremath{\colon}}\Gamma^\bullet {\longrightarrow}{\ensuremath{{\ensuremath{\mathbf{N}}}}}$ by $$\operatorname{D}_\Gamma(\gamma) = \min {\left\{[\Gamma:\Delta] ~:~ \gamma \notin \Delta\right\}}.$$ The associated *normal divisibility function* for normal, finite index subgroups is defined in an identical way and will be denoted by $\operatorname{D}_{\Gamma}^\lhd$. It is a simple matter to see that $\operatorname{F}_{\Gamma,X}(n)$ is the maximum value of $\operatorname{D}_{\Gamma}^\lhd$ over all non-trivial elements in $B_{\Gamma,X}(n)$. We will denote the associated maximum of $\operatorname{D}_\Gamma$ over this set by $\max \operatorname{D}_\Gamma (n)$.
The rest of the introduction is devoted to a question of Oleg Bogopolski, which concerns $\max \operatorname{D}_{\Gamma,X}(n)$. It was established in [@Bou] that $\log(n) \preceq \max \operatorname{D}_{\Gamma,X}(n)$ for any finitely generated group with an element of infinite order (this was also shown by [@Rivin]). For a nonabelian free group $F_m$ of rank $m$, Bogopolski asked whether $\max \operatorname{D}_{F_m,X}(n) \simeq \log(n)$ (see Problem 15.35 in the Kourovka notebook [@TheBook]). Our next result answers Bogopolski’s
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: '[Cr$_{2}$Ge$_{2}$Te$_{6}$]{} has been of interest for decades, as it is one of only a few naturally forming ferromagnetic semiconductors. Recently, this material has been revisited due to its potential as a 2 dimensional semiconducting ferromagnet and a substrate to induce anomalous quantum Hall states in topological insulators. However, many relevant properties of [Cr$_{2}$Ge$_{2}$Te$_{6}$]{} still remain poorly understood, especially the spin-phonon coupling crucial to spintronic, multiferrioc, thermal conductivity, magnetic proximity and the establishment of long range order on the nanoscale. We explore the interplay between the lattice and magnetism through high resolution micro-Raman scattering measurements over the temperature range from 10 K to 325 K. Strong spin-phonon coupling effects are confirmed from multiple aspects: two low energy modes splits in the ferromagnetic phase, magnetic quasielastic scattering in paramagnetic phase, the phonon energies of three modes show clear upturn below [T$_{C}$]{}, and the phonon linewidths change dramatically below [T$_{C}$]{} as well. Our results provide the first demonstration of spin-phonon coupling in a potential 2 dimensional atomic crystal.'
address:
- 'Department of Physics, University of Toronto, ON M5S 1A7 Canada'
- 'Department of Physics, Boston College 140 Commonwealth Ave Chestnut Hill MA 02467-3804 USA'
- 'Department of Chemistry, Princeton University, Princeton, NJ 08540 USA'
- 'Department of Chemistry, Princeton University, Princeton, NJ 08540 USA'
- 'Department of Physics, Boston College 140 Commonwealth Ave Chestnut Hill MA 02467-3804 USA'
author:
- Yao Tian
- 'Mason J. Gray'
- Huiwen Ji
- 'R. J. Cava'
- 'Kenneth S. Burch'
title: 'Magneto-Elastic Coupling in a potential ferromagnetic 2D Atomic Crystal'
---
\[sec:intro\]Introduction
=========================
[Cr$_{2}$Ge$_{2}$Te$_{6}$]{} is a particularly interesting material since it is in the very rare class of ferromagnetic semiconductors and possesses a layered, nearly two dimensional structure due to van Der Waals bonds[@CGT_original; @li2014crxte]. Recently this material has been revisited as a substrate for the growth of the topological insulator [Bi$_{2}$Te$_{3}$]{} to study the anomalous quantum Hall effect[@BT_CGT_quantum_hall]. Furthermore the van Der Waals bonds make it a candidate two dimensional atomic crystal, which is predicted as a platform to study 2D semiconducting ferromagnets and for single layered spintronics devices[@sivadas2015magnetic]. In such devices, spin-phonon coupling can be a key factor in the magnetic and thermal relaxation processes[@golovach2004phonon; @ganzhorn2013strong; @jaworski2011spin], while generating other novel effects such as multiferroticity[@wesselinowa2012origin; @issing2010spin]. Combined with the fact that understanding heat dissipation in nanodevices is crucial, it is important to explore the phonon dynamics and their interplay with the magnetism in [Cr$_{2}$Ge$_{2}$Te$_{6}$]{}. Indeed, recent studies have shown the thermal conductivity of its cousin compound [Cr$_{2}$Si$_{2}$Te$_{6}$]{} linearly increases with temperature in the paramagnetic phase, suggesting strong spin-phonon coupling is crucial in these materials[@casto2015strong]. However there are currently no direct probes of the phonon dynamics of [Cr$_{2}$Ge$_{2}$Te$_{6}$]{}, let alone the spin-phonon coupling. Such studies are crucial for understanding the potential role of magneto-elastic effects that could be central to the magnetic behavior of [Cr$_{2}$Ge$_{2}$Te$_{6}$]{} as a 2D atomic crystal and potential nano magneto-elastic device. Polarized temperature dependent Raman scattering is perfectly suited for such studies as it is well established for measuring the phonon dynamics and the spin-phonon coupling in bulk and 2D atomic crystals[@compatible_Heterostructure_raman; @Raman_Characterization_Graphene; @Raman_graphene; @Pandey2013; @sandilands2010stability; @zhao2011fabrication; @calizo2007temperature; @sahoo2013temperature; @polarized_raman_study_of_BFO; @dresselhaus2010characterizing]. Compared to other techniques, a high resolution Raman microscope can track sub-[cm$^{-1}$]{} changes to uncover subtle underlining physics. A demonstration of Raman studies of [Cr$_{2}$Ge$_{2}$Te$_{6}$]{} can be extremely meaningful for the future study of the exfoliated 2D ferromagnets.
![Crystal structure of [Cr$_{2}$Ge$_{2}$Te$_{6}$]{}. The unit cell is indicated by the black frame. Cr and Ge dimer are inside the octahedra formed by Te atoms. One third of the octahedra are filled by Ge-Ge dimers while the other is filled by Cr ions forming a distorted honeycomb lattice.[]{data-label="fig:CGT_structure"}](CGT_lattice_structure.eps){width="0.5\columnwidth"}
![(a): Raman spectra of [Cr$_{2}$Ge$_{2}$Te$_{6}$]{} taken in different conditions. All the spectra are taken at 300 K. The Raman spectra of the air-exposed sample shows broader and fewer Raman modes, indicating the formation of oxides. (b): Normalized Raman Spectra of [Cr$_{2}$Ge$_{2}$Te$_{6}$]{} in XX and XY geometry at 270 K, showing the different symmetry of the phonon modes.[]{data-label="633_532_oldsample_raman"}](CGT_532nm_airexposed_cleaved_300k_XX_XY.eps "fig:"){width="\figuresize"}\
In this paper, we demonstrate the ease of exfoliating [Cr$_{2}$Ge$_{2}$Te$_{6}$]{}, as well as the dangers of doing so in air. Namely we find the Raman spectra of [Cr$_{2}$Ge$_{2}$Te$_{6}$]{} are strongly deteriorated by exposure to air, but [Cr$_{2}$Ge$_{2}$Te$_{6}$]{} exfoliated in a glovebox reveals bulk like spectra. In addition, we find strong evidence for spin-phonon coupling in bulk [Cr$_{2}$Ge$_{2}$Te$_{6}$]{}, via polarized temperature dependent Raman spectroscopy. The spin-phonon coupling has been confirmed in multiple ways: below [T$_{C}$]{} we observe a split of two phonon modes due to the breaking of time reversal symmetry; a drastic quenching of magnetic quasielastic scattering; an anomalous hardening of an additional three modes; and a dramatic decrease of the phonon lifetimes upon warming into the paramagnetic phase. Our results also suggest the possibility of probing the magneto-elastic coupling using Raman spectroscopy, opening the door for further studies of exfoliated 2D [Cr$_{2}$Ge$_{2}$Te$_{6}$]{}.
\[sec:exp\][Method Section]{}
=============================
Single crystal [Cr$_{2}$Ge$_{2}$Te$_{6}$]{} was grown with high purity elements mixed in a molar ratio of 2:6:36; the extra Ge and Te were used as a flux. The materials were heated to 700$^{o}$C for 20 days and then slow cooled to 500$^{o}$C over a period of 1.5 days. Detailed growth procedures can be found elsewhere[@Huiwen_doc]. The Raman spectra on the crystal were taken in a backscattering configuration with a home-built Raman microscope[@RSI_unpublished]. The spectra were recorded with a polarizer in front of the spectrometer. Two Ondax Ultra-narrow-band Notch Filters were used to reject Rayleigh scattering. This also allows us to observe both Stokes and anti-Stokes Raman shifts and provides a way to confirm the absence of local laser heating. A solid-state 532 nm laser was used for the excitation. The temperature variance was achieved by using an automatically controlled closed-cycle cryostation designed and manufactured by Montana Instrument, Inc. The temperature stability was within 5 mK. To maximize the collection efficiency, a 100x N.A. 0.9 Zeiss objective was installed inside the cryostation. A heater and a thermometer were installed on the objective to prevent it from being damaged by the cold and to keep the optical response uniform at all sample temperatures. The laser spot size was 1 micron in diameter and the power was kept fairly low (80 $\mu$W) to avoid laser-induced heating. This was checked at 10 K by monitoring the anti-Stokes signal as the laser power was reduced. Once the anti-Stokes signal disappeared, the power was cut an additional $\approx 50\%$.
![(a): The reflection optical image of the exfoliated [Cr$_{2}$Ge$_{2}$Te$_{6}$]{}. The texts indicate different position of the prepared samples. (b): AFM topography image of the rectangle region in a. (c): The height distribution of the rectangle region in b. The height difference between the peaks reveals the thickness of the [Cr$_{2}$Ge$_{2}$Te$_{6}$]{} flakes, which are region 1: 30 nm and region 2: 4 nm. (d): Raman spectra of the two exfoliated [Cr$_{2}$Ge$_{2}$Te$_{6}$]{} flakes []{data-label="fig:exfoliated_CGT"}](CGT_exfoliation.eps){width="\
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: 'We describe a 325-MHz survey, undertaken with the Giant Metrewave Radio Telescope (GMRT), which covers a large part of the three equatorial fields at 9, 12 and 14.5 h of right ascension from the [ *Herschel*]{}-Astrophysical Terahertz Large Area Survey (H-ATLAS) in the area also covered by the Galaxy And Mass Assembly survey (GAMA). The full dataset, after some observed pointings were removed during the data reduction process, comprises 212 GMRT pointings covering $\sim90$ deg$^2$ of sky. We have imaged and catalogued the data using a pipeline that automates the process of flagging, calibration, self-calibration and source detection for each of the survey pointings. The resulting images have resolutions of between 14 and 24 arcsec and minimum rms noise (away from bright sources) of $\sim1$ mJy beam$^{-1}$, and the catalogue contains 5263 sources brighter than $5\sigma$. We investigate the spectral indices of GMRT sources which are also detected at 1.4 GHz and find them to agree broadly with previously published results; there is no evidence for any flattening of the radio spectral index below $S_{1.4}=10$ mJy. This work adds to the large amount of available optical and infrared data in the H-ATLAS equatorial fields and will facilitate further study of the low-frequency radio properties of star formation and AGN activity in galaxies out to $z \sim 1$.'
author:
- |
Tom Mauch$^{1,2,3}$[^1], Hans-Rainer Klöckner$^{1,4}$, Steve Rawlings$^1$, Matt Jarvis$^{2,5,1}$, Martin J. Hardcastle$^2$, Danail Obreschkow$^{1,6}$, D.J. Saikia$^{7,8}$ and Mark A. Thompson$^2$\
$^1$Oxford Astrophysics, Denys Wilkinson Building, Keble Road, Oxford OX1 3RH\
$^2$Centre for Astrophysics Research, University of Hertfordshire, College Lane, Hatfield, Hertfordshire AL10 9AB\
$^3$SKA South Africa, Third Floor, The Park, Park Road, Pinelands, 7405 South Africa\
$^4$Max-Planck-Institut für Radioastronomie, Auf dem Hügel 69, 53121 Bonn, Germany\
$^5$ Physics Department, University of the Western Cape, Cape Town, 7535, South Africa\
$^6$ International Centre for Radio Astronomy Research, University of Western Australia, 35 Stirling Highway, Crawley, WA 6009, Australia\
$^7$ National Centre for Radio Astrophysics, Tata Institute of Fundamental Research, Pune University Campus, Ganeshkind P.O., Pune 411007, India\
$^8$ Cotton College State University, Panbazar, Guwahati 781001, India\
bibliography:
- 'allrefs.bib'
- 'mn-jour.bib'
title: 'A 325-MHz GMRT survey of the [*Herschel*]{}-ATLAS/GAMA fields'
---
\[firstpage\]
surveys – catalogues – radio continuum: galaxies
Introduction
============
The *Herschel*-Astrophysical Terahertz Large Area Survey [H-ATLAS; @eales10] is the largest Open Time extragalactic survey being undertaken with the *Herschel Space Observatory* [@herschel10]. It is a blind survey and aims to provide a wide and unbiased view of the sub-millimetre Universe at a median redshift of $1$. H-ATLAS covers $\sim 570$ deg$^2$ of sky at $110$, $160$, $250$, $350$ and $500$ ${\mu}$m and is observed in parallel mode with [*Herschel*]{} using the Photodetector Array Camera [PACS; @pacs] at 110 and 160 ${\mu}$m and the Spectral and Photometric Imaging Receiver [SPIRE; @spire] at 250, 350 and 500 ${\mu}$m. The survey is made up of six fields chosen to have minimal foreground Galactic dust emission, one field in the northern hemisphere covering $150$ deg$^2$ (the NGP field), two in the southern hemisphere covering a total of $250$ deg$^2$ (the SGP fields) and three fields on the celestial equator each covering $\sim 35$ deg$^2$ and chosen to overlap with the Galaxy and Mass Assembly redshift survey [GAMA; @Driver+11] (the GAMA fields). The H-ATLAS survey is reaching 5-$\sigma$ sensitivities of (132, 121, 33.5, 37.7, 44.0) mJy at (110, 160, 250, 350, 500) $\mu$m and is expected to detect $\sim 200,000$ sources when complete [@Rigby+11].
A significant amount of multiwavelength data is available and planned over the H-ATLAS fields. In particular, the equatorial H-ATLAS/GAMA fields, which are the subject of this paper, have been imaged in the optical (to $r \sim 22.1$) as part of the Sloan Digital Sky Survey [SDSS; @sloan] and in the infrared (to $K \sim 20.1$) with the United Kingdom Infra-Red Telescope (UKIRT) through the UKIRT Infrared Deep Sky Survey [UKIDSS; @ukidss] Large Area Survey (LAS). In the not-too-distant future, the GAMA fields will be observed approximately two magnitudes deeper than the SDSS in 4 optical bands by the Kilo-Degree Survey (KIDS) to be carried out with the Very Large Telescope (VLT) Survey Telescope (VST), which was the original motivation for observing these fields. In addition, the GAMA fields are being observed to $K \sim 1.5-2$ mag. deeper than the level achieved by UKIDSS as part of the Visible and Infrared Survey Telescope for Astronomy (VISTA) Kilo-degree Infrared Galaxy (VIKING) survey, and with the Galaxy Evolution Explorer (GALEX) to a limiting AB magnitude of $\sim 23$.
In addition to this optical and near-infrared imaging there is also extensive spectroscopic coverage from many of the recent redshift surveys. The SDSS survey measured redshifts out to $z\sim0.3$ in the GAMA and NGP fields for almost all galaxies with $r<17.77$. The Two-degree Field (2dF) Galaxy Redshift Survey [2dFGRS; @2df] covers much of the GAMA fields for galaxies with $b_{J}<19.6$ and median redshift of $\sim0.1$. The H-ATLAS fields were chosen to overlap with the GAMA survey, which is ongoing and aims to measure redshifts for all galaxies with $r<19.8$ to $z\sim0.5$. Finally, the WiggleZ Dark Energy survey has measured redshifts of blue galaxies over nearly half of the H-ATLAS/GAMA fields to a median redshift of $z\sim0.6$ and detects a significant population of galaxies at $z\sim1$.
The wide and deep imaging from the far infrared to the ultraviolet and extensive spectroscopic coverage makes the H-ATLAS/GAMA fields unparallalled for detailed investigation of the star-forming and AGN radio source populations. However, the coverage of the H-ATLAS fields is not quite so extensive in the radio. All of the fields are covered down to a $5\sigma$ sensitivity of 2.5 mJy beam$^{-1}$ at 1.4 GHz by the National Radio Astronomy Obervatory (NRAO) Very Large Array (VLA) Sky Survey [NVSS; @nvss]. These surveys are limited by their $\sim45$-arcsec resolution, which makes unambiguous identification of radio sources with their host galaxy difficult, and by not being deep enough to find a significant population of star-forming galaxies, which only begin to dominate the radio-source population below 1 mJy [e.g. @Wilman08]. The Faint Images of the Radio Sky at Twenty-cm [FIRST; @first] survey covers the NGP and GAMA fields at a resolution of $\sim6$ arcsec down to $\sim0.5$ mJy at 1.4 GHz, is deep enough to probe the bright end of the star-forming galaxy population, and has good enough resolution to see the morphological structure of the larger radio-loud AGN, but it must be combined with the less sensitive NVSS data for sensitivity to extended structure. Catalogues based on FIRST and NVSS have already been used in combination with H-ATLAS data to investigate the radio-FIR correlation [@jarvis+10] and to search for evidence for differences between the star-formation properties of radio galaxies and their radio-quiet counterparts (@hardcastle+10 [@hardcastle+12; @virdee+13]).
To complement the already existing radio data in the H-ATLAS fields, and in particular to provide a second radio frequency, we have observed the GAMA fields (which have the most extensive multi-wavelength coverage) at 325 MHz with the Giant Metrewave Radio Telescope [GMRT; @gmrtref]. The most sensitive GMRT images reach a $1\sigma$ depth of $\sim 1$ mJy beam$^{-1}$ and the
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: 'The $f(R)$ gravity models formulated in Einstein conformal frame are equivalent to Einstein gravity together with a minimally coupled scalar field. We shall explore phantom behavior of $f(R)$ models in this frame and compare the results with those of the usual notion of phantom scalar field.'
---
.5cm -26pt -.85in
\
${\bf Yousef~Bisabr}$[^1]\
\
Introduction
============
There are strong observational evidences that the expansion of the universe is accelerating. These observations are based on type Ia supernova [@super], cosmic microwave background radiation [@cmbr], large scale structure surveys [@ls] and weak lensing [@wl]. There are two classes of models aim at explaining this phenomenon: In the first class, one modifies the laws of gravity whereby a late-time acceleration is produced. A family of these modified gravity models is obtained by replacing the Ricci scalar $R$ in the usual Einstein-Hilbert Lagrangian density for some function $f(R)$ [@carro] [@sm]. In the second class, one invokes a new matter component usually referred to as dark energy. This component is described by an equation of state parameter $\omega \equiv \frac{p}{\rho}$, namely the ratio of the homogeneous dark energy pressure over the energy density. For a cosmic speed up, one should have $\omega < -\frac{1}{3}$ which corresponds to an exotic pressure $p<-\rho/3$. Recent analysis of the latest and the most reliable dataset (the Gold dataset [@gold]) have indicated that significantly better fits are obtained by allowing a redshift dependent equation of state parameter [@data]. In particular, these observations favor the models that allow the equation of state parameter crossing the line corresponding to $\omega=-1$, the phantom divide line (PDL), in the near past. It is therefore important to construct dynamical models that provide a redshift dependent equation of state parameter and allow for crossing the phantom barrier.\
Most simple models of this kind employ a scalar field coupled minimally to curvature with negative kinetic energy which referred to as phantom field [@ph] [@caldwell]. In contrast to these models, one may consider models which exhibit phantom behavior due to curvature corrections to gravitational equations rather than introducing exotic matter systems. Recently, there is a number of attempts to find phantom behavior in $f(R)$ gravity models. It is shown that one may realize crossing the PDL in this framework without recourse to any extra component relating to matter degrees of freedom with exotic behavior [@o] [@n]. Following these attempts, we intend to explore phantom behavior in some $f(R)$ gravity models which have a viable cosmology, i.e. a matter-dominated epoch followed by a late-time acceleration. In contrast to [@n], we shall consider $f(R)$ gravity models in Einstein conformal frame. It should be noted that mathematical equivalence of Jordan and Einstein conformal frames does not generally imply that they are also physically equivalent. In fact it is shown that some physical systems can be differently interpreted in different conformal frames [@soko] [@no]. The physical status of the two conformal frames is an open question which we are not going to address here. Our motivation to work in Einstein conformal frame is that in this frame, $f(R)$ models consist of Einstein gravity plus an additional dynamical degree of freedom, the scalar partner of the metric tensor. This suggests that it is this scalar degree of freedom which drives late-time acceleration in cosmologically viable $f(R)$ models. We compare this scalar degree of freedom with the usual notion of phantom scalar field. We shall show that behaviors of this scalar field attributed to $f(R)$ models which allow crossing the PDL are similar to those of a quintessence field with a negative potential rather than a phantom with a wrong kinetic term.
Phantom as a Minimally coupled Scalar Field
===========================================
The simplest class of models that provides a redshift dependent equation of state parameter is a scalar field minimally coupled to gravity whose dynamics is determined by a properly chosen potential function $V(\varphi)$. Such models are described by the Lagrangian density [^2] $$L=\frac{1}{2}\sqrt{-g}(R-\alpha ~g^{\mu\nu}\partial_{\mu}\varphi
\partial_{\nu}\varphi-2V(\varphi))
\label{a1}$$ where $\alpha=+1$ for quintessence and $\alpha=-1$ for phantom. The distinguished feature of the phantom field is that its kinetic term enters (\[a1\]) with opposite sign in contrast to the quintessence or ordinary matter. The Einstein field equations which follow (\[a1\]) are $$R_{\mu\nu}-\frac{1}{2}g_{\mu\nu}R=T_{\mu\nu}
\label{a2}$$ with $$T_{\mu\nu}=\alpha~\partial_{\mu}\varphi
\partial_{\nu}\varphi-\frac{1}{2}\alpha~g_{\mu\nu}
\partial_{\gamma}\varphi \partial^{\gamma}\varphi-g_{\mu\nu} V(\varphi)
\label{a3}$$ In a homogeneous and isotropic spacetime, $\varphi$ is a function of time alone. In this case, one may compare (\[a3\]) with the stress tensor of a perfect fluid with energy density $\rho_{\varphi}$ and pressure $p_{\varphi}$. This leads to the following identifications $$\rho_{\varphi}=\frac{1}{2}\alpha
\dot{\varphi}^2+V(\varphi)~,~~~~~p_{\varphi}=\frac{1}{2}\alpha
\dot{\varphi}^2-V(\varphi) \label{a4}$$ The equation of state parameter is then given by $$\omega_{\varphi}=\frac{\frac{1}{2}\alpha
\dot{\varphi}^2-V(\varphi)}{\frac{1}{2}\alpha
\dot{\varphi}^2+V(\varphi)} \label{a5}$$ In the case of a quintessence (phantom) field with $V(\varphi)>0$ ($V(\varphi)<0$) the equation of state parameter remains in the range $-1<\omega_{\varphi}<1$. In the limit of small kinetic term (slow-roll potentials [@slow]), it approaches $\omega_{\varphi}=-1$ but does not cross this line. The phantom barrier can be crossed by either a phantom field ($\alpha<0$) with $V(\varphi)>0$ or a quintessence field ($\alpha>0$) with $V(\varphi)<0$, when we have $2|V(\varphi)|>\dot{\varphi}^2$. This situation corresponds to $$\rho_{\varphi}>0~~~~~,~~~~~p_{\varphi}<0~~~~~,~~~~~V(\varphi)>0~~~~~~~~~~~~~~~phantom
\label{a51}$$ $$\rho_{\varphi}<0~~~~~,~~~~~p_{\varphi}>0~~~~~,~~~~~V(\varphi)<0~~~~~~~~~~quintessence\label{a52}$$ Here it is assumed that the scalar field has a canonical kinetic term $\pm \frac{1}{2}\dot{\varphi}^2$. It is shown [@vik] that any minimally coupled scalar field with a generalized kinetic term (k-essence Lagrangian [@k]) can not lead to crossing the PDL through a stable trajectory. However, there are models that employ Lagrangians containing multiple fields [@multi] or scalar fields with non-minimall coupling [@non] which in principle can achieve crossing the barrier.\
There are some remarks to do with respect to $V(\varphi)<0$ appearing in (\[a52\]). In fact, the role of negative potentials in cosmological dynamics has been recently investigated by some authors [@neg]. One of the important points about the cosmological models containing such potentials is that they predict that the universe may end in a singularity even if it is not closed. For more clarification, consider a model containing different kinds of energy densities such as matter, radiation, scalar fields and so on. The Friedmann equation in a flat universe is $H^2 \propto
\rho_{t}$ with $\rho_{t}=\Sigma_{i}\rho_{i}$ being the sum of all energy densities. It is clear that the universe expands forever if $\rho_{t}>0$. However, if the contribution of some kind of energy is negative so that $\rho_{i}<0$, then it is possible to have $H^2=0$ at finite time and the size of the universe starts to decrease [^3]. We will return to this issue in the context of $f(R)$ gravity models in the next section.\
The possibility of existing a fluid with a surenegative pressure ($\omega<-1$) leads to problems such as vacuum instability and violation of energy conditions [@carroll]. For a perfect fluid with energy density $\rho$ and pressure $p$, the weak energy condition requires that $\rho\geq 0$ and $\rho+p \geq 0$. These state that the energy density is positive and the pressure is not too large compared to the energy density. The null energy condition $\rho+p\geq 0$ is a special case of the latter and implies that energy density can be negative if there is a compensating positive pressure. The strong energy condition as a hallmark of general relativity states that $\rho+p \geq 0$ and $\rho+3p\geq 0$. It implies the null energy condition and excludes excessively large negative pressures. The null dominant energy condition is a statement that $\rho\geq |p|$. The physical motivation of this condition is to prevent vacuum instability or propagation of energy outside the light cone. Applying to an equation of state $p=\omega \rho$ with a constant $\omega$, it means that $\omega \geq -1$. Violation of all these reasonable constraints by phantom, gives an unusual feature to
|
{
"pile_set_name": "ArXiv"
}
|
---
author:
- |
\
Royal Society University Research Fellow\
School of Physics & Astronomy\
The University of Birmingham\
BIRMINGHAM B15 2TT, UK\
E-mail:
title: Experimental Tests of the Standard Model
---
BHAM-HEP/01-02\
31 October 2001
Introduction
============
The field of precise experimental tests of the electroweak sector of the Standard Model encompasses a wide range of experiments. The current status of these is reviewed in this report, with emphasis placed on new developments in the year preceding summer 2001. A theme common to many measurements is that theoretical and experimental uncertainties are comparable. The theoretical uncertainties, usually coming from the lack of higher-order calculations, can be at least as hard to estimate reliably as the experimental errors.
At low energies, new hadronic cross-section results in collisions are discussed. The new measurement of the muon anomalous magnetic moment at Brookhaven is reported and compared with recent Standard Model calculations. Results from the now complete LEP data sample are reviewed, together with recent results from the Tevatron, HERA and SLD. The synthesis of many of these results into a global test of the Standard Model via a comprehensive fit is summarised. Finally, prospects for the next few years are considered.
Many results presented here are preliminary: they are not labelled explicitly for lack of space. References should be consulted for details.
R and $\mathbf{\alpha(M_Z^2)}$
==============================
The BES-II detector at the BEPC electron-positron collider in Beijing, China, has been operating since 1997. Many measurements have been made in the centre-of-mass energy range $2<\sqrt{s}<5$ GeV, but of relevance to electroweak physics are those of the ratio $$R = \frac{\sigma(\Mepem\to\mathrm{hadrons})}{\sigma_0(\Mepem\to\Mmpmm)}$$ where the denominator, $\sigma_0(\Mepem\to\Mmpmm)=4\pi\alpha^2(0)/(3s)$, is the lowest-order QED prediction. The BES measurements [@bib:besr] of R are presented in Figure \[fig:besr\], where the improvement in quality over previous, often very early, measurements is clear. Around 1000 hadronic events are used at each energy, and an average precision of 6.6% is obtained at each of the 85 energy points. The point-to-point correlated error is estimated to be 3.3%, providing a factor of 2 to 3 improvement over earlier measurements.
In order to achieve such an improvement, detailed studies of the detector acceptance for hadronic events at low $\sqrt{s}$ were made, in collaboration with the Lund Monte Carlo team. The experimental acceptance for hadronic events varies in the range 50 to 87% from 2 to 4.8 GeV respectively, so the modelling at low $\sqrt{s}$ is of most concern. Good descriptions of the hadronic event data were obtained from a tuned version of the [LUARLW]{} generator, and the hadronic model-dependent uncertainty is estimated to be as low as 2-3%.
At even lower energies, analysis continues of the large data sample from CMD-2 [@bib:cmd2] at the VEPP-2M collider at Novosibirsk taken over $0.36<\sqrt{s}<1.4$ GeV. Many exclusive final-states are studied, with the main contribution to the overall cross-section arising from $\pi^+\pi^-$ production.
A key application of the low energy R measurements is in the prediction of the value of the electromagnetic coupling at the mass scale. This is modified from its zero-momentum value, $\alpha(0)=1/137.03599976(50)$, by vacuum polarisation loop corrections: $$\alpha(M_Z^2)=\frac{\alpha(0)}{1-\Delta\alpha_{e\mu\tau}(M_Z^2)-
\dahad(M_Z^2)-\Delta\alpha_{top}(M_Z^2)} .$$ The contributions from leptonic and top quark loops ($\Delta\alpha_{e\mu\tau}$ and $\Delta\alpha_{top}$, respectively) are sufficiently well calculated knowing only the particle masses. The $\dahad$ term contains low-energy hadronic loops, and must be calculated via a dispersion integral: $$\dahad(M_Z^2) = - \frac{\alpha
M_Z^2}{3\pi} \Re\int_{4m_{\pi}^2}^\infty ds
\frac{R(s)}{s(s-M_Z^2-i\epsilon)} .$$ The R data points must, at least, be interpolated to evaluate this integral. More sophisticated methods are employed by different authors, and use may also be made of $\tau$ decay spectral function data via isospin symmetry. A recent calculation [@bib:pietrzyk] using minimal assumptions has obtained $\dahad(M_Z^2)=0.02761\pm0.00036$, approximately a factor two more precise than a previous similar estimate which did not use the new BES-II data. With extra theory-driven assumptions, an error as low as $\pm0.00020$ may be obtained [@bib:martin].
Prospects for further improvements in measurements of the hadronic cross-section at low energies are good: an upgraded accelerator in Beijing should give substantially increased luminosity; CLEO proposes to run at lower centre-of-mass energies than before to examine the region from 3 to 5 GeV; DA$\Phi$NE may be able to access the low energy range with radiative events; and finally the concept of a very low energy ring to work together with the present PEP-II LER could give access to the poorly covered region between 1.4 and 2 GeV.
The Muon Anomalous Magnetic Moment g-2
======================================
The Brookhaven E821 experiment has recently reported [@bib:e821] a new measurement of the muon anomalous magnetic moment, $a_{\mu}$, by measuring the spin-precession frequency, $\Mwa$, of polarised muons in a magnetic field: $$a_{\mu} \equiv \frac{g-2}{2} = \frac{\Mwa m_{\mu}c}{e\langle B\rangle}$$ The muons circulate in a special-purpose storage ring constructed to have an extremely uniform magnetic field across its aperture. The spin-precession frequency $\Mwa$ is measured by observing the time variation of production of decay electrons above a fixed energy cut-off (2 GeV), as shown in Figure \[fig:e821\]. The mean bending field is measured using two sets of NMR probes: one fixed set mounted around the ring and used for continuous monitoring, and another set placed on a trolley which can be pulled right around the evacuated beam chamber. In practice, the magnetic field is re-expressed in terms of the mean proton NMR frequency, $\omega_p$, and $a_{\mu}$ extracted from: $$a_{\mu} = \frac{R}{\lambda-R}$$ where $R=\omega_a/\omega_p$ and $\lambda$ is the ratio of muon to proton magnetic moments.
The latest E821 result, obtained using $0.95\times10^9$ $\mu^+$ decays is [@bib:e821]: $$a_{\mu^+} = (11\,659\,202\pm14\pm6)\times 10^{-10}$$ The overall precision obtained is relatively 1.3 parts per million: 1.2 ppm from statistics and 0.5 ppm from systematic errors. Data from a further $4\times10^9$ $\mu^+$ and $3\times10^9$ $\mu^-$ are in hand, and should result in a factor two improvement in the near future.
Interpretation of this result in terms of the Standard Model and possible new physics requires detailed calculations of loop corrections to the simple QED $\mu\mu\gamma$ vertex, which gives the original $g=2$ at lowest order. The corrections may be subdivided into electromagnetic (QED), weak and hadronic parts according to the type of loops. The QED and weak terms are respectively calculated to be $a_{\mu}(QED)
= (11\, 657\,470.57 \pm 0.29) \times 10^{-10}$, and $a_{\mu}(weak)
= (15.2 \pm 0.4) \times 10^{-10}$. The hadronic corrections, although much smaller than the QED correction, provide the main source of uncertainty on the predicted $a_{\mu}$. To $\mathcal{O}(\alpha^3)$, the dominant corrections may be subdivided into the lowest and higher-order vacuum polarisation terms and higher-order “light-on-light” terms. The lowest-order (vacuum polarisation) term is numerically much the largest. It can be calculated using a dispersion relation: $$a_{\mu}(had;LO) = \frac{\alpha^2(0)}{3\pi^2}\int_{4m_{\pi}^2}^{\infty}
ds \frac{R(s)\hat{K}(s)}{s^2}$$ where $\hat{K}(s)$ is a known bounded function. As for $\alpha(M_Z^2)$, optional additional theory-driven assumptions may be made. Recent estimates of the lowest-order vacuum polarisation term are shown in Table \[tab:lovp\]. There is some ambiguity
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: 'We study the effects of weak columnar and point disorder on the vortex-lattice phase transitions in high temperature superconductors. The combined effect of thermal fluctuations and of quenched disorder is investigated using a simplified cage model. For columnar disorder the problem maps into a quantum particle in a harmonic + random potential. We use the variational approximation to show that columnar and point disorder have opposite effect on the position of the melting line as observed experimentally. Replica symmetry breaking plays a role at the transition into a vortex glass at low temperatures.'
address: |
Department of Physics and Astronomy\
University of Pittsburgh\
Pittsburgh, PA 15260
author:
- 'Yadin Y. Goldschmidt'
date: 'August 4, 1996'
title: ' [**Phase Transitions of the Flux Line Lattice in High-Temperature Superconductors with Weak Columnar and Point Disorder**]{} '
---
[2]{}
There is a lot of interest in the physics of high temperature superconductors due to their potential technological applications. In particular these materials are of type II and allow for partial magnetic flux penetration. Pinning of the magnetic flux lines (FL) by many types of disorder is essential to eliminate dissipative losses associated with flux motion. In clean materials below the superconducting temperature there exist a ’solid ’ phase where the vortex lines form a triangular Abrikosov lattice [@blatter]. This solid can melt due to thermal fluctuations and the effect of impurities. In particular known observed transitions are into a flux liquid at higher temperatures via a [*melting line*]{} (ML)[@zeldov], and into a vortex glass at low temperature [@VG],[@Fisher],[@BG] in the presence of disorder- the so called [*entanglement line*]{} (EL). [@blatter]
Recently the effect of point and columnar disorder on the position of the melting transition has been measured experimentally in the high-$T_c$ material $Bi_2Sr_2CaCu_2O_8$ [@Khaykovitch]. Point disorder has been induced by electron irradiation (with 2.5 MeV electrons), whereas columnar disorder has been induced by heavy ion irradiation (1 GeV Xe or 0.9 GeV Pb). It turns out that the flux melting transition persists in the presence of either type of disorder, but its position shifts depending on the disorder type and strength.
A significant difference has been observed between the effects of columnar and point disorder on the location of the ML. Weak columnar defects stabilize the solid phase with respect to the vortex liquid phase and shift the transition to [*higher*]{} fields, whereas point-like disorder destabilizes the vortex lattice and shifts the melting transition to [*lower*]{} fields. In this paper we attempt to provide an explanation to this observation. The case of point defects has been addressed in a recent paper by Ertas and Nelson [@EN] using the cage-model approach which replaces the effect of vortex-vortex interactions by an harmonic potential felt by a single vortex. For columnar disorder the parabolic cage model was introduced by Nelson and Vinokur \[8\]. Here we use a different approach to analyze the cage-model Hamiltonian vis. the replica method together with the variational approximation. In the case of columnar defects our approach relies on our recent analysis of a quantum particle in a random potential [@yygold]. We compare the effect of the two types of disorder with each other and with results of recent experiments.
Assume that the average magnetic field is aligned along the $z$-axis. Following EN we describe the Hamiltonian of a single FL whose position is given by a two-component vector ${\bf r}(z)$ (overhangs are neglected) by: $$\begin{aligned}
{\cal H} = \int_0^L dz \left\{ {\frac{\tilde{\epsilon} }{2}} \left({\frac{ d%
{\bf r }}{dz}} \right)^2 + V(z,{\bf r }) + {\frac{\mu }{2}} {\bf r }^2
\right\}. \label{hamil}\end{aligned}$$
Here $\tilde \epsilon =\epsilon _0/\gamma ^2$ is the line tension of the FL, $\gamma ^2=m_z/m_{\perp }$ is the mass anisotropy, $\epsilon _0=(\Phi
_0/4\pi \lambda )^2$, ($\lambda $ being the penetration length), and $\mu
\approx \epsilon _0/a_0^2$ is the effective spring constant (setting the cage size) due to interactions with neighboring FLs, which are at a typical distance of $a_0=\sqrt{\Phi _0/B}$ apart.
For the case of columnar (or correlated) disorder, $V(z,{\bf r})=V({\bf r})$ is independent of $z$, and $$\begin{aligned}
\langle V({\bf r})V({\bf r^{\prime }})\rangle \equiv -2f(({\bf r}-{\bf %
r^{\prime }})^2/2)=g\epsilon _0^2\xi ^2\delta _\xi ^{(2)}({\bf r}-{\bf %
r^{\prime }}), \label{VVC}\end{aligned}$$ where $$\begin{aligned}
\delta _\xi ^{(2)}({\bf r}-{\bf r^{\prime }})\approx 1/(2\pi \xi ^2)\exp (-(%
{\bf r}-{\bf r^{\prime }})^2/2\xi ^2), \label{delta}\end{aligned}$$ and $\xi $ is the vortex core diameter. The dimensionless parameter g is a measure of the strength of the disorder. On the other hand for point-disorder, $V$ depends on $z$ and [@EN] $$\begin{aligned}
\langle V(z,{\bf r})V(z^{\prime },{\bf r^{\prime }})\rangle =\tilde
\Delta \epsilon
_0^2\xi ^3\delta _\xi ^{(2)}({\bf r}-{\bf r^{\prime }})\delta (z-z^{\prime
}). \label{VVP}\end{aligned}$$
The quantity that measures the transverse excursion of the FL is $$\begin{aligned}
u_0^2(\ell )\equiv \langle |{\bf r}(z)-{\bf r}(z+\ell )|^2\rangle \ /2,
\label{ul}\end{aligned}$$
Let us now review the connection between a quantum particle in a random potential and the behavior of a FL in a superconductor. The partition function of the former is just like the partition sum of the FL, provided one make the identification [@nelson] $$\begin{aligned}
\hbar \rightarrow T,\qquad \beta \hbar \rightarrow L, \label{corresp}\end{aligned}$$ Where T is the temperature of the superconductor and L is the system size in the $z$-direction. $\beta $ is the inverse temperature of the quantum particle. We are interested in large fixed L as T is varied, which corresponds to high $\beta $ for the quantum particle when $\hbar $ (or alternatively the mass of the particle) is varied. The variable $z$ is the so called Trotter time. This is the picture we will be using for the case of columnar disorder.
For the case of point-disorder the picture we use is that of a directed polymer in the presence of a random potential plus an harmonic potential as used by EN.
The main effect of the harmonic (or cage) potential is to cap the transverse excursions of the FL beyond a confinement length $\ell ^{*}\approx
a_0/\gamma $. The mean square displacement of the flux line is given by
$$u^2(T)\approx u_0^2(\ell ^{*}). \label{uT}$$
The location of the melting line is determined by the Lindemann criterion $$u^2(T_m(B))=c_L^2a_0^2, \label{Lind}$$ where $c_L\approx 0.15-0.2$ is the phenomenological Lindemann constant. This means that when the transverse excursion of a section of length $\approx
\ell ^{*}$becomes comparable to a finite fraction of the interline separation $a_0$, the melting of the flux solid occurs.
We consider first the case of columnar disorder. In the absence of disorder it is easily obtained from standard quantum mechanics and the correspondence (\[corresp\]), that when $L\rightarrow \infty ,$
$$u^2(T)=\frac T{\sqrt{\widetilde{\epsilon }\mu }}\left( 1-\exp (-\ell ^{*}%
\sqrt{\mu /\widetilde{\epsilon }})\right) =\frac T{\sqrt{\widetilde{\epsilon
}\mu }}(1-e^{-1}), \label{u2g0}$$
from which we find that
$$B_m(T)\approx \frac{\Phi _0^{}}{\xi ^2}\frac{\epsilon _0^2\xi ^2c_L^4}{%
\gamma ^2T^2}. \label{Bmg0}$$
When we turn on disorder we have to solve the problem of a quantum particle in a random quenched potential. This problem has been recently solved using the replica method and the variational approximation [@yygold]. Let us review briefly the results of this approach. In this approximation we chose the best quadratic Hamiltonian parametrized by the matrix $%
s_{ab}(z-z^{\prime })$:
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: 'We present the general scheme for construction of noiseless networks detecting entanglement with the help of linear, hermiticity-preserving maps. We show how to apply the method to detect entanglement of unknown state without its prior reconstruction. In particular, we prove there always exists noiseless network detecting entanglement with the help of positive, but not completely positive maps. Then the generalization of the method to the case of entanglement detection with arbitrary, not necessarily hermiticity-preserving, linear contractions on product states is presented.'
author:
- Paweł Horodecki
- Remigiusz Augusiak
- Maciej Demianowicz
title: |
General construction of noiseless networks detecting entanglement\
with help of linear maps
---
Introduction
============
It has been known that entanglement can be detected with help of special class of maps called positive maps [@sep; @Peres; @book]. In particular there is an important criterion [@sep] saying that $\varrho$ acting on a given product Hilbert space $\mathcal{H}_{A}{\otimes}\mathcal{H}_{B}$ is separable if and only if for all positive (but not completely positive) maps $\Lambda :
\mathcal{B}(\mathcal{H}_{B})\rightarrow
\mathcal{B}(\mathcal{H}_{A})$ [@B] the following operator $$X_{\Lambda}(\varrho)=[I \otimes \Lambda](\varrho)$$ has all non-negative eigenvalues which usually is written as $$[I \otimes \Lambda](\varrho) \geq 0 \label{PositiveMaps1}.$$ Here by $I$ we denote the identity map acting on $\mathcal{B}(\mathcal{H}_{A})$. Since any positivity-preserving map is also hermiticity-preserving, it makes sense to speak about eigenvalues of $X_{\Lambda}(\varrho)$. However, it should be emphasized that there are many $\Lambda$s (and equivalently the corresponding criteria) and to characterize them is a hard and still unsolved problem (see, e.g., Ref. [@Kossakowski] and references therein).
For a long time the above criterion has been treated as purely mathematical. One used to take matrix $\varrho$ (obtained in some [*prior*]{} state estimation procedure) and then put it into the formula (\[PositiveMaps1\]). Then its spectrum was calculated and the conclusion was drawn. However it can be seen that for, say states acting on $\mathcal{H}_{A}{\otimes}\mathcal{H}_{B}\sim
\mathbb{C}^{d}{\otimes}\mathbb{C}^{d}$ and maps $\Lambda :
\mathcal{B}(\mathbb{C}^{d}) \rightarrow
\mathcal{B}(\mathbb{C}^{d})$, the spectrum of the operator $X_{\Lambda}(\varrho)$ consists of $n_{\mathrm{spec}}=d^{2}$ elements, while full [*prior*]{} estimation of such states corresponds to $n_{\mathrm{est}}=d^{4}-1$ parameters.
The question was raised [@PHAE] as to whether one can perform the test (\[PositiveMaps1\]) physically without necessity of [*prior*]{} tomography of the state $\varrho$ despite the fact that the map $I{\otimes}\Lambda$ is not physically realizable. The corresponding answer was [@PHAE] that one can use the notion of structural physical approximation $\widetilde{I \otimes
\Lambda}$ (SPA) of un–physical map $I \otimes \Lambda$ which is physically realizable already, but at the same time the spectrum of the state $$\tilde{X}_{\Lambda}(\varrho)=[\widetilde{I \otimes
\Lambda}](\varrho)$$ is just an affine transformation of that of the (unphysical) operator $X_{\Lambda}(\varrho)$. The spectrum of $\tilde{X}_{\Lambda}(\varrho)$ can be measured with help of the spectrum estimator [@Estimator], which requires estimation of only $d^{2}$ parameters which (because of affinity) are in one to one correspondence with the needed spectrum of (\[PositiveMaps1\]). Note that for $2{\otimes}2$ systems (the composite system of two qubits), similar approaches lead to the method of detection of entanglement measures (concurrence [@Concurrence] and entanglement of formation [@EoF]) without the state reconstruction [@PHPRL].
The disadvantage of the above method is [@Carteret] that realization of SPA requires addition the noise to the system (we have to put some controlled ancillas, couple the system, and then trace them out). In Ref. [@Carteret] the question was raised about the existence of noiseless quantum networks, i.e., those of which the only input data are: (i) unknown quantum information represented by $\varrho^{{\otimes}m}$ (ii) the controlled measured qubit which reproduces us the spectrum moments (see Ref. [@Estimator]). It was shown that for at least one positive map (transposition) $T$ the noiseless network exists [@Carteret]. Such networks for two-qubit concurrence and three-qubit tangle have also been designed [@Carteret2].
In the present paper we ask a general question: do noiseless networks work only for special maps (functions) or do they exist for any positive map test? In the case of a positive answer to the latter: is it possible to design a general method for constructing them? Can it be adopted to any criteria other than the one defined in (\[PositiveMaps1\])?
For this purpose we first show how to measure a spectrum of the matrix $\Theta(\varrho)$, where $\Theta :
\mathcal{B}(\mathbb{C}^{m})\rightarrow\mathcal{B}(\mathbb{C}^{m})$ is an arbitrary linear, hermiticity-preserving map and $\varrho$ is a given density operator acting on $\mathbb{C}^{m}$, with the help of only $m$ parameters estimated instead of $m^{2}-1$. For bipartite $\varrho$ where $m=d^{2}$ this gives $d^{2}$ instead of $d^{4}-1$. This approach is consistent with previous results [@Grassl; @Leifer; @Brun] where arbitrary polynomials of elements of a given state $\varrho$ have been considered. In these works it was shown out that any at most $k$-th degree polynomial of a density matrix $\varrho$ can be measured with help of two collective observables on $k$ copies of $\varrho$. In fact one can treat the moments of $\Theta(\varrho)$ which we analyze below as polynomials belonging to such a class. We derive the explicit form of observables for the sake of possible future application. Moreover, approach presented in the present paper allows for quite natural identification of observable that detects an arbitrary polynomial of the state $\varrho$ subjected to some transformation $\Theta$. Then we provide an immediate application in entanglement detection showing that for suitable $\Theta$ the scheme constitutes just a right method for detecting entanglement without prior state reconstruction with the help of either positive map criteria (\[PositiveMaps1\]) or linear contraction methods discussed later.
General scheme for construction of noiseless network detecting spectrum of $\Theta(\varrho)$ {#general}
============================================================================================
Construction of an observable
-----------------------------
Since $m \times m$ matrix $\Theta(\varrho)$ is hermitian its spectrum may be calculated using only $m$ numbers $$\label{alfy}
\alpha_{k}\equiv {\mathrm{Tr}}[\Theta(\varrho)]^{k}=\sum_{i=1}^{m}\lambda_{i}^{k}\qquad
(k=1,\ldots,m),$$ where $\lambda_{i}$ are eigenvalues of $\Theta(\varrho)$. We shall show that all these spectrum moments can be represented by mean values of special observables. To this aim let us consider the permutation operator $V^{(k)}$ defined by the formula $$\label{VKa}
V^{(k)} |e_{1}\rangle|e_{2}\rangle \otimes ... \otimes |e_{k}
\rangle= |e_{k}\rangle|e_{1}\rangle \otimes ... \otimes |e_{k-1}
\rangle,
$$ where $(k=1,\ldots,m)$ and ${|e_{i}\rangle}$ are vectors from $\mathbb{C}^{m}$. One can see that $V^{(1)}$ is just an identity operator $\mathbbm{1}_{m}$ acting on $\mathbb{C}^{m}$. Combining Eqs. (\[alfy\]) and (\[VKa\]) we infer that $\alpha_{k}$ may be expressed by relation $$\alpha_{k}={\mathrm{Tr}}\left\{V^{(k)}[\Theta(\varrho)]^{\otimes k}\right\}
\label{alfa}$$ which is generalization of the formula from Refs. [@Estimator; @PHAE] where $\Theta$ was (unlike here) required to be a physical operation. At this stage the careful analysis of the right–hand side of Eq. (\[alfa\]) shows that $\alpha_{k}$ is a polynomial of at most $k$-th degree in matrix elements of $\varrho$. This, together with the observation of Refs. [@Brun; @Grassl; @Leifer] allows us already to construct a single collective observable that detects $\alpha_{k}$. However, for the sake of possible future applications we derive the observable explicitly below. To this aim we first notice that $\alpha_{k}$ may be obtained using hermitian conjugation of $V^{(k)}$ which again is a permutation operator but permutes states ${|e_{i}\rangle}$ in the reversed order. Therefore all the numbers $\alpha_{k}$ may be expressed as $$\label{alfa2}
\alpha_{k}=\frac{1}{2}{\mathrm{Tr}}\
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: 'This issue of *Statistical Science* draws its inspiration from the work of James M. Robins. Jon Wellner, the Editor at the time, asked the two of us to edit a special issue that would highlight the research topics studied by Robins and the breadth and depth of Robins’ contributions. Between the two of us, we have collaborated closely with Jamie for nearly 40 years. We agreed to edit this issue because we recognized that we were among the few in a position to relate the trajectory of his research career to date.'
address:
- 'Thomas S. Richardson is Professor and Chair, Department of Statistics, University of Washington, Box 354322, Seattle, Washington 98195, USA .'
- 'Andrea Rotnitzky is Professor, Department of Economics, Universidad Torcuato Di Tella & CONICET, Av. Figueroa Alcorta 7350, Sáenz Valiente 1010, Buenos Aires, Argentina .'
author:
-
-
title: 'Causal Etiology of the Research of James M. Robins'
---
Many readers may be unfamiliar with Robins’ singular career trajectory and in particular how his early practical experience motivated many of the inferential problems with which he was subsequently involved. Robins majored in mathematics at Harvard College, but then, in the spirit of the times, left college to pursue more activist social and political goals. Several years later, Robins enrolled in Medical School at Washington University in St. Louis, graduating in 1976. His M.D. degree remains his only degree, other than his high school diploma.
After graduating, he interned in medicine at Harlem Hospital in New York. After completing the internship, Robins spent a year working as a primary care physician in a community clinic in the Roxbury neighborhood of Boston. During that year, he helped organize a vertical Service Employees International Union affiliate that included all salaried personnel, from maintenance to physicians, working at the health center. In retaliation, he was dismissed by the director of the clinic and found that he was somewhat unwelcome at the other Boston community clinics. Unable to find a job and with his unemployment insurance running out, he surprisingly was able to obtain a prestigious residency in Internal Medicine at Yale University, a testament, he says with some irony, to the enduring strength of one’s Ivy League connections.
At Yale, Robins and his college friend Mark Cullen, now head of General Medicine at Stanford Medical School, founded an occupational health clinic, with the goal of working with trade unions in promoting occupational health and safety. When testifying in workers’ compensation cases, Robins was regularly asked whether it was “more probable than not that a worker’s death or illness was *caused* by exposure to chemicals in the workplace.” Robins’ lifelong interest in causal inference began with his need to provide an answer. As the relevant scientific papers consisted of epidemiologic studies and biostatistical analyses, Robins enrolled in biostatistics and epidemiology classes at Yale. He was dismayed to learn that the one question he needed to answer was the one question excluded from formal discussion in the mainstream biostatistical literature.[^1] At the time, most biostatisticians insisted that evidence for causation could only be obtained through randomized controlled trials; since, for ethical reasons, potentially harmful chemicals could not be randomly assigned, it followed that statistics could play little role in disentangling causation from spurious correlation.
Confounding
===========
In his classes, Robins was struck by the gap present between the informal, yet insightful, language of epidemiologists such as @miettinen:1981 ([-@miettinen:1981]) expressed in terms of “confounding, comparability, and bias,” and the technical language of mathematical statistics in which these terms either did not have analogs or had other meanings. Robins’ first major paper “The foundations of confounding in Epidemiology” written in 1982, though only published in [-@robins:foundation:1987], was an attempt to bridge this gap. As one example, he offered a precise mathematical definition for the informal epidemiologic concept of a “confounding variable” that has apparently stood the test of time (see @vanderweele2013, [-@vanderweele2013]). As a second example, @efron:hinkley:78 ([-@efron:hinkley:78]) had formally considered inference accurate to order $n^{-3/2}$ in variance conditional on exact or approximate ancillary statistics. Robins showed, surprisingly, that long before their paper, epidemiologists had been intuitively and informally referring to an estimator as “unbiased” just when it was asymptotically unbiased conditional on either exact or approximate ancillary statistics; furthermore, they intuitively required that the associated conditional Wald confidence interval be accurate to $O(n^{-3/2})$ in variance. As a third example, he solved the problem of constructing the tightest Wald-type intervals guaranteed to have conservative coverage for the average causal effect among the $n$ study subjects participating in a completely randomized experiment with a binary response variable; he showed that this interval can be strictly narrower than the usual binomial interval even under the Neyman null hypothesis of no average causal effect. To do so, he constructed an estimator of the variance of the empirical difference in treatment means that improved on a variance estimator earlier proposed by @neyman:sur:1923 ([-@neyman:sur:1923]). @aronow2014 ([-@aronow2014]) have recently generalized this result in several directions including to nonbinary responses.
Time-dependent Confounding and the -formula {#sec:time-dependent}
===========================================
It was also in 1982 that Robins turned his attention to the subject that would become his grail: causal inference from complex longitudinal data with time-varying treatments, that eventually culminated in his revolutionary papers @robins:1986 ([-@robins:1986; -@robins:1987:addendum]). His interest in this topic was sparked by (i) a paper of @gilbert:1982 ([-@gilbert:1982])[^2] on the healthy worker survivor effect in occupational epidemiology, wherein the author raised a number of questions Robins answered in these papers and (ii) his medical experience of trying to optimally adjust a patient’s treatments in response to the evolution of the patient’s clinical and laboratory data.
Overview
--------
Robins career from this point on became a “quest” to solve this problem, and thereby provide methods that would address central epidemiological questions, for example, *is a given long-term exposure harmful or a treatment beneficial?* *If beneficial, what interventions, that is, treatment strategies, are optimal or near optimal?*
In the process, Robins created a “bestiary” of causal models and analytic methods.[^3] There are the basic “phyla” consisting of the g-formula, marginal structural models and structural nested models. These phyla then contain “species,” for example, structural nested failure time models, structural nested distribution models, structural nested (multiplicative additive and logistic) mean models and yet further “subspecies”: direct-effect structural nested models and optimal-regime structural nested models.
Each subsequent model in this taxa was developed to help answer particular causal questions in specific contexts that the “older siblings” were not quite up to. Thus, for example, Robins’ creation of structural nested and marginal structural models was driven by the so-called null paradox, which could lead to falsely finding a treatment effect where none existed, and was a serious nonrobustness of the estimated g-formula, his then current methodology. Similarly, his research on higher-order influence function estimators was motivated by a concern that, in the presence of confounding by continuous, high dimensional confounders, even doubly robust methods might fail to adequately control for confounding bias.
This variety also reflects Robins’ belief that the best analytic approach varies with the causal question to be answered, and, even more importantly, that confidence in one’s substantive findings only comes when multiple, nearly orthogonal, modeling strategies lead to the same conclusion.
Causally Interpreted Structured Tree Graphs {#sec:tree-graph}
-------------------------------------------
Suppose one wishes to estimate from longitudinal data the causal effect of time-varying treatment or exposure, say cigarette smoking, on a failure time outcome such as all-cause mortality. In this setting, a time-dependent confounder is a time-varying covariate (e.g., presence of emphysema) that is a predictor of both future exposure and of failure. In 1982, the standard analytic approach was to model the conditional probability (i.e., the hazard) of failure time $t$ as a function of past exposure history using a time-dependent Cox proportional hazards model. Robins formally showed that, even when confounding by unmeasured factors and model specification are absent, this approach may result in estimates of effect that may fail to have a causal interpretation, regardless of whether or not one also adjusts for the measured time-dependent confounders in the analysis. In fact, if previous exposure also predicts the subsequent evolution of the time-dependent confounders (e.g., since smoking is a cause of emphysema, it predicts this disease) then the standard approach can find an artifactual exposure effect even under the sharp null hypothesis of no net, direct or indirect effect of exposure on the failure time of any subject.
Prior to @robins:1986 ([-@robins:1986]), although informal discussions of net, direct and indirect (i.e., mediated) effects of time varying exposures were to be found in the discussion sections of most epidemiologic papers, no formal mathematical definitions
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: 'We study thin interpolating sequences $\{\lambda_n\}$ and their relationship to interpolation in the Hardy space $H^2$ and the model spaces $K_\Theta = H^2 \ominus \Theta H^2$, where $\Theta$ is an inner function. Our results, phrased in terms of the functions that do the interpolation as well as Carleson measures, show that under the assumption that $\Theta(\lambda_n) \to 0$ the interpolation properties in $H^2$ are essentially the same as those in $K_\Theta$.'
address:
- |
Pamela Gorkin, Department of Mathematics\
Bucknell University\
Lewisburg, PA USA 17837
- |
Brett D. Wick, School of Mathematics\
Georgia Institute of Technology\
686 Cherry Street\
Atlanta, GA USA 30332-0160
author:
- 'Pamela Gorkin$^\dagger$'
- 'Brett D. Wick$^\ddagger$'
title: Thin Sequences and Their Role in Model Spaces and Douglas Algebras
---
[^1]
[^2]
\[section\] \[thm\][Lemma]{} \[thm\][Corollary]{} \[thm\][Conjecture]{} \[thm\][Problem]{} \[thm\][Proposition]{} \[thm\][Definition]{} \[thm\][Remark]{}
Introduction and Motivation
===========================
A sequence $\{\lambda_j\}_{j=1}^\infty$ is an [interpolating sequence]{.nodecor} for $H^\infty$, the space of bounded analytic functions, if for every $w\in\ell^\infty$ there is a function $f\in H^\infty$ such that $$f(z_j) = w_j, ~\mbox{for all}~ j\in{\mathbb{N}}.$$ Carleson’s interpolation theorem says that $\{\lambda_j\}_{j=1}^\infty$ is an interpolating sequence for $H^\infty$ if and only if $$\label{Interp_Cond}
\delta = \inf_{j}\delta_j:=\inf_j \left\vert B_j(\lambda_j)\right\vert=\inf_{j}\prod_{k \ne j} \left|\frac{\lambda_j - \lambda_k}{1 - \overline{\lambda}_j \lambda_k}\right| > 0,$$ where $$B_j(z):=\prod_{k\neq j}\frac{-\overline{\lambda_k}}{{\ensuremath{\left\vert\lambda_k\right\vert}}}\frac{z-\lambda_k}{1-\overline{\lambda}_kz}$$ denotes the Blaschke product vanishing on the set of points $\{\lambda_k:k\neq j\}$.
In this paper, we consider sequences that (eventually) satisfy a stronger condition than . A sequence $\{\lambda_j\}\subset{\mathbb{D}}$ is *thin* if $$\lim_{j\to\infty}\delta_j:=\lim_{j\to\infty}\prod_{k\neq j}\left\vert\frac{\lambda_j-\lambda_k}{1-\overline{\lambda}_k\lambda_j}\right\vert=1.$$
Thin sequences are of interest not only because functions solving interpolation for thin interpolating sequences have good bounds on the norm, but also because they are interpolating sequences for a very small algebra: the algebra $QA = VMO \cap H^\infty$, where $VMO$ is the space of functions on the unit circle with vanishing mean oscillation [@W].
Continuing work in [@CFT] and [@GPW], we are interested in understanding these sequences in different settings. This will require two definitions that are motivated by the work of Shapiro and Shields, [@SS], in which they gave the appropriate conditions for a sequence to be interpolating for the Hardy space $H^2$.
Considering more general Hilbert spaces will require the introduction of reproducing kernels: In a reproducing kernel Hilbert space $\mathcal{H}$ (see [@AM p. 17]) we let $K_{\lambda_n}$ denote the kernel corresponding to the point $\lambda_n$; that is, for each function in the Hilbert space we have that $f(\lambda_n)=\left\langle f, K_{\lambda_n}\right\rangle_{\mathcal{H}}$. If we have an $\ell^2$ sequence $a = \{a_n\}$, we define $$\|a\|_{N, \ell^2} = \left(\sum_{j \ge N} |a_j|^2\right)^{1/2}.$$ The concepts of interest are the following.
A sequence $\{\lambda_n\}\subset\Omega \subseteq \mathbb{C}^n$ is said to be [*an eventual $1$-interpolating sequence for a reproducing kernel Hilbert space $\mathcal{H}$*]{}, denoted $EIS_{\mathcal{H}}$, if for every $\varepsilon > 0$ there exists $N$ such that for each $\{a_n\} \in \ell^2$ there exists $f_{N, a} \in \mathcal{H}$ with $$f_{N, a}(\lambda_n) {\ensuremath{\left\|K_{\lambda_n}\right\|}}_{\mathcal{H}}^{-1}=f_{N, a}(\lambda_n) K_{\lambda_n}(\lambda_n)^{-\frac{1}{2}} = a_n ~\mbox{for}~ n \ge N ~\mbox{and}~ \|f_{N, a}\|_{\mathcal{H}} \le (1 + \varepsilon) \|a\|_{N, \ell^2}.$$ A sequence $\{\lambda_n\}$ is said to be a [*strong asymptotic interpolating sequence for $\mathcal{H}$*]{}, denoted $AIS_{\mathcal{H}}$, if for all $\varepsilon > 0$ there exists $N$ such that for all sequences $\{a_n\} \in \ell^2$ there exists a function $G_{N, a} \in \mathcal{H}$ such that $\|G_{N, a}\|_\mathcal{H} \le \|a\|_{N,\ell^2}$ and $$\|\{G_{N, a}(\lambda_n) K_{\lambda_n}(\lambda_n)^{-\frac{1}{2}} - a_n\}\|_{N, \ell^2} < \varepsilon \|a\|_{N, \ell^2}.$$
Given a (nonconstant) inner function $\Theta$, we are interested in these sequences in model spaces; we define the model space for $\Theta$ an inner function by $K_\Theta = H^2 \ominus \Theta H^2$. The reproducing kernel in $K_\Theta$ for $\lambda_0 \in \mathbb{D}$ is $$K_{\lambda_0}^\Theta(z) = \frac{1 - \overline{\Theta(\lambda_0)}{\Theta(z)}}{1 - \overline{\lambda_0}z}$$ and the normalized reproducing kernel is $$k_{\lambda_0}^\Theta(z) = \sqrt{\frac{1 - |\lambda_0|^2}{1 - |\Theta(\lambda_0)|^2}} K_{\lambda_0}^\Theta(z).$$ Finally, note that $$K_{\lambda_0} = K_{\lambda_0}^\Theta + \Theta \overline{\Theta(\lambda_0)}K_{\lambda_0}.$$ We let $P_\Theta$ denote the orthogonal projection of $H^2$ onto $K_\Theta$.
We consider thin sequences in these settings as well as in Douglas algebras: Letting $L^\infty$ denote the algebra of essentially bounded measurable functions on the unit circle, a Douglas algebra is a closed subalgebra of $L^\infty$ containing $H^\infty$. It is a consequence of work of Chang and Marshall that a Douglas algebra $\mathcal{B}$ is equal to the closed algebra generated by $H^\infty$ and the conjugates of the interpolating Blaschke products invertible in $\mathcal{B}$, [@C; @M].
In this paper, we continue work started in [@GM] and [@GPW] investigating the relationship between thin sequences, $EIS_{\mathcal{H}}$ and $AIS_{\mathcal{H}}$ where $\mathcal{H}$ is a model space or the Hardy space $H^2$. In Section \[HSV\], we consider the notion of eventually interpolating and asymptotic interpolating sequences in the model space setting. We show that in reproducing kernel Hilbert spaces of analytic functions on domains in $\mathbb{C}^n$, these two are the same. Given results in [@GPW], this is not surprising and the proofs are similar to those in the $H^\infty$ setting. We then turn to our main result of that section. If we have a Blaschke sequence $\{\lambda_n\}$ in $\mathbb{D}$ and assume that our inner function $\Theta$ satisfies $|\Theta(\lambda_n)| \to 0$, then a sequence $\{\lambda_n\}$ is an $EIS_{K_\Theta}$ sequence if and only if it is an $EIS_{H^2}$ sequence (and therefore $AIS_{K_\Theta}$ sequence if and only if it is an $AIS_{H^2}$). In Section \[CMMS\] we rephrase these properties in terms of the Carleson embedding constants on the model spaces. Finally, in Section \[asip\_algebra\], we recall the definition of Douglas algebras and show that appropriate definitions and conditions are quite different in that setting.
Preliminaries
=============
Recall that a sequence $\{x_n\}$ in
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: 'Transmission spectroscopy of exoplanets is a tool to characterize rocky planets and explore their habitability. Using the Earth itself as a proxy, we model the atmospheric cross section as a function of wavelength, and show the effect of each atmospheric species, Rayleigh scattering and refraction from 115 to 1000 nm. Clouds do not significantly affect this picture because refraction prevents the lowest 12.75 km of the atmosphere, in a transiting geometry for an Earth-Sun analog, to be sampled by a distant observer. We calculate the effective planetary radius for the primary eclipse spectrum of an Earth-like exoplanet around a Sun-like star. Below 200 nm, ultraviolet (UV) O$_2$ absorption increases the effective planetary radius by about 180 km, versus 27 km at 760.3 nm, and 14 km in the near-infrared (NIR) due predominantly to refraction. This translates into a 2.6% change in effective planetary radius over the UV-NIR wavelength range, showing that the ultraviolet is an interesting wavelength range for future space missions.'
author:
- 'Y. Bétrémieux and L. Kaltenegger'
title: |
Transmission spectrum of Earth as a transiting exoplanet\
from the ultraviolet to the near-infrared
---
Introduction
============
Many planets smaller than Earth have now been detected with the Kepler mission, and with the realization that small planets are much more numerous than giant ones (Batalha et al. 2013), future space missions, such as the James Webb Space Telescope (JWST), are being planned to characterize the atmosphere of potential Earth analogs by transiting spectroscopy, explore their habitability, and search for signs of life. The simultaneous detection of large abundances of either O$_{2}$ or O$_{3}$ in conjunction with a reducing species such as CH$_{4}$, or N$_2$O, are biosignatures on Earth (see e.g. Des Marais et al. 2002; Kaltenegger et al. 2010a and reference therein). Although not a clear indicative for the presence of life, H$_2$O is essential for life.
Simulations of the Earth’s spectrum as a transiting exoplanet (Ehrenreich et al. 2006; Kaltenegger & Traub 2009; Pallé et al. 2009; Vidal-Madjar et al. 2010; Rauer et al. 2011; García Muñoz et al. 2012; Hedelt et al. 2013) have focused primarily on the visible (VIS) to the infrared (IR), the wavelength range of JWST (600-5000 nm). No models of spectroscopic signatures of a transiting Earth have yet been computed from the mid- (MUV) to the far-ultraviolet (FUV). Which molecular signatures dominate this spectral range? In this paper, we present a model of a transiting Earth’s transmission spectrum from 115 to 1000 nm (UV-NIR) during primary eclipse. While no UV missions are currently in preparation, this model can serve as a basis for future UV mission concept studies.
Model description {#model}
=================
To simulate the spectroscopic signatures of an Earth-analog transiting its star, we modified the Smithsonian Astrophysical Observatory 1998 (SAO98) radiative transfer code (see Traub & Stier 1976; Johnson et al. 1995; Traub & Jucks 2002; Kaltenegger & Traub 2009 and references therein for details), which computes the atmospheric transmission of stellar radiation at high spectral resolution from a molecular line list database. Updates include a new database of continuous absorber’s cross sections, as well as N$_2$, O$_2$, Ar, and CO$_2$ Rayleigh scattering cross sections from the ultraviolet (UV) to the near-infrared (NIR). A new module interpolates these cross sections and derives resulting optical depths according to the mole fraction of the continuous absorbers and the Rayleigh scatterers in each atmospheric layer. We also compute the deflection of rays by atmospheric refraction to exclude atmospheric regions for which no rays from the star can reach the observer due to the observing geometry.
Our database of continuous absorbers is based on the MPI-Mainz-UV-VIS Spectral Atlas of Gaseous Molecules[^1]. For each molecular species of interest (O$_2$, O$_3$, CO$_2$, CO, CH$_4$, H$_2$O, NO$_2$, N$_2$O, and SO$_2$), we created model cross sections composed of several measured cross sections from different spectral regions, at different temperatures when measurements are available, with priority given to higher spectral resolution measurements (see Table \[tbl\_crsc\]). We compute absorption optical depths for different altitudes in the atmosphere using the cross section model with the closest temperature to that of the atmospheric layer considered. Note that we do not consider line absorption from atomic or ionic species which could produce very narrow but possibly detectable features at high spectral resolution (see also Snellen et al. 2013).
The Rayleigh cross sections, $\sigma_R$, of N$_2$, O$_2$, Ar, and CO$_2$, which make-up 99.999% of the Earth’s atmosphere, are computed with $$\label{rayl}
{\sigma_{R}} = \frac{32\pi^{3}}{3} \left( \frac{{\nu_{0}}}{n_{0}} \right)^{2} w^{4} F_K ,$$ where $\nu_0$ is the refractivity at standard pressure and temperature (or standard refractivity) of the molecular species, $w$ is the wavenumber, $F_K$ is the King correction factor, and $n_{0}$ is Loschmidt’s constant. Various parametrized functions are used to describe the spectral dependence of $\nu_0$ and $F_K$. Table \[tbl\_rayl\] gives references for the functional form of both parameters, as well as their spectral region.
The transmission of each atmospheric layer is computed with Beer’s law from all optical depths. We use disc-averaged quantities for our model atmosphere.
We use a present-day Earth vertical composition (Kaltenegger et al. (2010b) for SO$_2$; Lodders & Fegley, Jr. (1998) for Ar; and Cox (2000) for all other molecules) up to 130 km altitude, unless specified otherwise. Above 130 km, we assume constant mole fraction with height for all the molecules except for SO$_2$ which we fix at zero, and for N$_2$, O$_2$, and Ar which are described below. Below 100 km, we use the US 1976 atmosphere (COESA 1976) as the temperature-pressure profile. Above 100 km, the atmospheric density is sensitive to and increases with solar activity (Hedin 1987). We use the tabulated results of the MSIS-86 model, for solar maximum (Table A1.2) and solar minimum conditions (Table A1.1) published in Rees (1989), to derive the atmospheric density, pressure, and mole fractions for N$_2$, O$_2$, and Ar above 100 km. We run our simulations in two different spectral regimes. In the VIS-NIR, from 10000 to 25000 cm$^{-1}$ (400-1000 nm), we use a 0.05 cm$^{-1}$ grid, while in the UV from 25000 to 90000 cm$^{-1}$ (111-400 nm), we use a 0.5 cm$^{-1}$ grid. For displaying the results, the VIS-NIR and the UV simulations are binned on a 4 cm$^{-1}$ and a 20 cm$^{-1}$ grid, respectively. The choice in spectral resolution impacts predominantly the detectability of spectral features.
The column abundance of each species along a given ray is computed taking into account refraction, tracing specified rays from the observer back to their source. Each ray intersects the top of the model atmosphere with an impact parameter $b$, the projected radial distance of the ray to the center of the planetary disc as viewed by the observer. As rays travel through the planetary atmosphere, they are bent by refraction along paths define by an invariant $L = (1 + \nu(r)) r \sin\theta(r)$ where both the zenith angle, $\theta(r)$, of the ray, and the refractivity, $\nu(r)$, are functions of the radial position of the ray with respect to the center of the planet. The refractivity is given by $$\label{refrac}
\nu(r) = \left( \frac{n(r)}{n_{0}} \right) \sum_{j} f_{j}(r) {\nu_{0}}_{j} = \left( \frac{n(r)}{n_{0}} \right) \nu_{0}(r) ,$$ where ${\nu_{0}}_{j}$ is the standard refractivity of the j$^{th}$ molecular species while $\nu_{0}(r)$ is that of the atmosphere, $n(r)$ is the local number density, and $f_{j}(r)$ is the mole fraction of the j$^{th}$ species. Here, we only consider the main contributor to the refractivity (N$_2$, O$_2$, Ar, and CO$_2$) which are well-mixed in the Earth’s atmosphere, and fix the standard refractivity at all altitudes at its surface value.
If we assume a zero refractivity at the top of the atmosphere, the minimum radial position from the planet’s center, $r_{min}$, that can be reached by
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: 'We propose a construction of string cohomology spaces for Calabi-Yau hypersurfaces that arise in Batyrev’s mirror symmetry construction. The spaces are defined explicitly in terms of the corresponding reflexive polyhedra in a mirror-symmetric manner. We draw connections with other approaches to the string cohomology, in particular with the work of Chen and Ruan.'
address:
- 'Department of Mathematics, Columbia University, New York, NY 10027, USA'
- 'Max-Planck-Institut für Mathematik, Bonn, D-53111, Germany'
author:
- 'Lev A. Borisov'
- 'Anvar R. Mavlyutov'
title: 'String cohomology of Calabi-Yau hypersurfaces via Mirror Symmetry'
---
Å[[A]{}]{}
\[section\] \[thm\][Lemma]{} \[thm\][Corollary]{} \[thm\][Proposition]{}
\[thm\][Remark]{} \[thm\][Example]{} \[thm\][Definition]{} \[thm\][Conjecture]{} \[thm\][Conjectural Definition]{}
Introduction {#section.intro}
============
The notion of orbifold cohomology has appeared in physics as a result of studying the string theory on orbifold global quotients, (see [@dhvw]). In addition to the usual cohomology of the quotient, this space was supposed to include the so-called twisted sectors, whose existence was predicted by the modular invariance condition on the partition function of the theory. Since then, there have been several attempts to give a rigorous mathematical formulation of this cohomology theory. The first two, due to [@bd] and [@Batyrev.cangor], tried to define the topological invariants of certain algebraic varieties (including orbifold global quotients) that should correspond to the dimensions of the Hodge components of a conjectural string cohomology space. These invariants should have the property arising naturally from physics: they are preserved by partial crepant resolutions; moreover, they coincide with the usual Hodge numbers for smooth varieties. Also, these invariants must be the same as those defined by physicists for orbifold global quotients. In [@Batyrev.cangor; @Batyrev.nai], Batyrev has successfully solved this problem for a large class of singular algebraic varieties. The first mathematical definition of the orbifold cohomology [*space*]{} was given in [@cr] for arbitrary orbifolds. Moreover, this orbifold cohomology possesses a product structure arising as a limit of a natural quantum product. It is still not entirely clear if the dimensions of the Chen-Ruan cohomology coincide with the prescription of Batyrev whenever both are defined, but they do give the same result for reduced global orbifolds.
In this paper, we propose a construction of string cohomology spaces for Calabi-Yau hypersurfaces that arise in the Batyrev mirror symmetry construction (see [@b2]), with the spaces defined rather explicitly in terms of the corresponding reflexive polyhedra. A peculiar feature of our construction is that instead of a single string cohomology space we construct a finite-dimensional family of such spaces, which is consistent with the physicists’ picture (see [@Greene]). We verify that this construction is consistent with the previous definitions in [@bd], [@Batyrev.cangor] and [@cr], in the following sense. The (bigraded) dimension of our space coincides with the definitions of [@bd] and [@Batyrev.cangor]. In the case of hypersurfaces that have only orbifold singularities, we recover Chen-Ruan’s orbifold cohomology as one special element of this family of string cohomology spaces. We also conjecture a partial natural ring structure on our string cohomology space, which is in correspondence with the cohomology ring of crepant resolutions. This may be used as a real test of the Chen-Ruan orbifold cohomology ring. We go further, and conjecture the B-model chiral ring on the string cohomology space. This is again consistent with the description of the B-model chiral ring of smooth Calabi-Yau hypersurfaces in [@m2].
Our construction of the string cohomology space for Calabi-Yau hypersurfaces is motivated by Mirror Symmetry. Namely, the description in [@m3] of the cohomology of semiample hypersurfaces in toric varieties applies to the smooth Calabi-Yau hypersurfaces in [@b2]. Analysis of Mirror Symmetry on this cohomology leads to a natural construction of the string cohomology space for all semiample Calabi-Yau hypersurfaces. As already mentioned, our string cohomology space depends not only on the complex structure (the defining polynomial $f$), but also on some extra parameter we call $\omega$. For special values of this parameter of an orbifold Calabi-Yau hypersurface, we get the orbifold Dolbeault cohomology of [@cr]. However, for non-orbifold Calabi-Yau hypersurfaces, there is no natural special choice of $\omega$, which means that the general definition of the string cohomology space should depend on some mysterious extra parameter. In the situation of Calabi-Yau hypersurfaces, the parameter $\omega$ corresponds to the defining polynomial of the mirror Calabi-Yau hypersurface. In general, we expect that this parameter should be related to the “stringy complexified Kähler class”, which is yet to be defined.
In an attempt to extend our definitions beyond the Calabi-Yau hypersurface case, we give a conjectural definition of string cohomology vector spaces for stratified varieties with $\QQ$-Gorenstein toroidal singularities that satisfy certain restrictions on the types of singular strata. This definition involves intersection cohomology of the closures of strata, and we check that it produces spaces of correct bigraded dimension. It also reproduces orbifold cohomology of a $\QQ$-Gorenstein toric variety as a special case.
Here is an outline of our paper. In Section \[s:sth\], we examine the connection between the original definition of the [*string-theoretic*]{} Hodge numbers in [@bd] and the [*stringy*]{} Hodge numbers in [@Batyrev.cangor]. We point out that these do not always give the same result and argue that the latter definition is the more useful one. In Section \[section.mirr\], we briefly review the mirror symmetry construction of Batyrev, mainly to fix our notations and to describe the properties we will use in the derivation of the string cohomology. Section \[section.anvar\] describes the cohomology of semiample hypersurfaces in toric varieties and explains how mirror symmetry provides a conjectural definition of the string cohomology of Calabi-Yau hypersurfaces. It culminates in Conjecture \[semiampleconj\], where we define the stringy Hodge spaces of semiample Calabi-Yau hypersurfaces in complete toric varieties. We spend most of the remainder of the paper establishing the expected properties of the string cohomology space. Sections \[s:hd\] and \[section.brel\] calculate the dimensions of the building blocks of our cohomology spaces. In Section \[section.brel\], we develop a theory of deformed semigroup rings which may be of independent interest. This allows us to show in Section \[section.bbo\] that Conjecture \[semiampleconj\] is compatible with the definition of the stringy Hodge numbers from [@Batyrev.cangor]. In the non-simplicial case, this requires the use of $G$-polynomials of Eulerian posets, whose relevant properties are collected in the Appendix. Having established that the dimension is correct, we try to extend our construction to the non-hypersurface case. Section \[section.general\] gives another conjectural definition of the string cohomology vector space in a somewhat more general situation. It hints that the intersection cohomology and the perverse sheaves should play a prominent role in future definitions of string cohomology. In Section \[s:vs\], we connect our work with that of Chen-Ruan [@cr] and Poddar [@p]. Finally, in Section \[section.vertex\], we provide yet another description of the string cohomology of Calabi-Yau hypersurfaces, which was inspired by the vertex algebra approach to Mirror Symmetry.
[*Acknowledgments.*]{} We thank Victor Batyrev, Robert Friedman, Mainak Poddar, Yongbin Ruan and Richard Stanley for helpful conversations and useful references. The second author also thanks the Max-Planck Institut für Mathematik in Bonn for its hospitality and support.
String-theoretic and stringy Hodge numbers {#s:sth}
==========================================
The [*string-theoretic*]{} Hodge numbers were first defined in the paper of Batyrev and Dais (see [@bd]) for varieties with Gorenstein toroidal or quotient singularities. In subsequent papers [@Batyrev.cangor; @Batyrev.nai] Batyrev defined [*stringy*]{} Hodge numbers for arbitrary varieties with log-terminal singularities. To our knowledge, the relationship between these two concepts has never been clarified in the literature. The goal of this section is to show that the string-theoretic Hodge numbers coincide with the stringy ones under some conditions on the singular strata.
We begin with the definition of the string-theoretic Hodge numbers.
\[d:bd\] [@bd] Let $X = \bigcup_{i \in I} X_i$ be a stratified algebraic variety over $\CC$ with at most Gorenstein toroidal singularities such that for each $i \in I$ the singularities of $X$ along the stratum $X_i$ of codimension $k_i$ are defined by a $k_i$-dimensional finite rational polyhedral cone $\sigma_i$; i.e., $X$ is locally isomorphic
|
{
"pile_set_name": "ArXiv"
}
|
epsf.sty 220 mm 145 mm 0.5 mm 1 mm 8 mm
[M. Nieto-Vesperinas[^1] and J. R. Arias-González[^2]]{}
[*$^1$Instituto de Ciencia de Materiales de Madrid, CSIC*]{}
[*$^2$Instituto Madrileño de Estudios Avanzados en Nanociencia*]{}
[*Cantoblanco, 28049 Madrid, Spain.*]{}
Introduction {#sec:introduction}
============
The purpose of this report is to present the theoretical foundations of the interaction of evanescent fields on an object. Evanescent electromagnetic waves are inhomogeneous components of the near field, bound to the surface of the scattering object. These modes travel along the illuminated sample surface and exponentially decrease outside it [@bornwolf99ch11; @nieto-vesperinas91; @mandel95], [*e.g.*]{}, either in the form of lateral waves [@tamir72a; @tamir72b] created by total internal reflection (TIR) at dielectric flat interfaces, whispering–gallery modes in dielectric tips and particles [@hill88; @owen81; @benincasa87; @collot93; @knight95; @weiss95; @nieto-vesperinas96] or of plasmon polaritons [@raether88] in metallic corrugated interfaces (see Section \[sec:PFM\]). The force exerted by these evanescent waves on particles near the surface is of interest for several reasons. On the one hand, evanescent waves convey high resolution of the scattered field signal, beyond the half wavelength limit. This is the essence of near–field scanning optical microscopy, abbreviated usually as NSOM [@pohl93; @paesler96]. These fields may present large concentrations and intensity enhancements in subwavelength regions near tips thus giving rise to large gradients that produce enhanced trapping forces that may enable one to handle particles within nanometric distances [@novotny97]. In addition, the large contribution of evanescent waves to the near field is the basis of the high resolution of signals obtained by transducing the force due to these waves on particles over surfaces when such particles are used as probes. On the other hand, evanescent waves have been used both to control the position of a particle above a surface and to estimate the interaction (colloidal force) between such a particle and the surface (see Chapter 6) [@sasaki97; @clapp99; @dogariu00].
The first experimental observation, demonstrating the mechanical action of a single evanescent wave ([*i.e*]{}., of the lateral wave produced by total internal reflection at a dielectric (saphire–water interface) on microspheres immersed in water over a dielectric surface) was made in [@kawata92]. Further experiments either over waveguides [@kawata96] or attaching the particle to the cantilever of an atomic force microscope (AFM) [@vilfan98] aimed at estimating the magnitude of this force.
The scattering of an evanescent electromagnetic wave by a dielectric sphere has been investigated by several authors using Mie’s scattering theory (addressing scattering cross sections [@chew79] and electromagnetic forces [@almaas95]), as well as using ray optics [@prieve93; @walz99]. In particular, [@walz99] made a comparison with [@almaas95]. Although no direct evaluation of either theoretical work with any experimental result has been carried out yet, likely due to the yet lack of accurate well characterized and controlled experimental estimations of these TIR observed forces. In fact, to get an idea of the difficulties of getting accurate experimental data, we should consider the fluctuations of the particle position in its liquid environment, due to both Brownian movement and drift microcurrents, as well as the obliteration produced by the existence of the friction and van der Waals forces between particle and surface [@vilfan98; @almaas95]. This has led so far to discrepancies between experiment and theory.
In the next section we shall address the effect of these forces on particles from the point of view of the dipolar approximation, which is of considerable interpretative value to understand the contribution of horizontal and vertical forces. Then we shall show how the multiple scattering of waves between the surface and the particle introduces important modifications of the above mentioned forces, both for larger particles and when they are very close to substrates. Further, we shall investigate the interplay of these forces when there exists slight corrugation in the surface profile. Then the contribution of evanescent waves created under total internal reflection still being important, shares its effects with radiative propagating components that will exert scattering repulsive forces. Even so, the particle can be used in these cases as a scanning probe that transduces this force in a photonic force microscopy operation.
Force on a Small Particle: The Dipolar Approximation {#sec:dipapprox}
====================================================
Small polarizable particles, namely, those with radius $a\ll \lambda $, in the presence of an electromagnetic field experience a Lorentz force [@gordon73]:
$$\label{eq:lorentz}
{\bf F}=({\vec {\wp}} \cdot \nabla) {\vec{{\cal E}}}+ \frac{1}{c}\frac{
\partial {\vec \wp}}{\partial t} \times {\vec{{\cal B}}}.$$
In Equation (\[eq:lorentz\]) ${\vec{\wp}}$ is the induced dipole moment density of the particle, and ${\vec{{\cal E}}}$, ${\vec{{\cal B}}}$ are the electric and magnetic vectors, respectively.
At optical frequencies, used in most experiments, the observed magnitude of the electromagnetic force is the time–averaged value. Let the electromagnetic field be time–harmonic, so that ${\vec{{\cal E}}}({\bf r}
,t)=\Re e \{ {\bf E}({\bf r})\exp (-i\omega t) \}$, ${\vec{{\cal B}}}({\bf r
},t)=\Re e \{ {\bf B}({\bf r})\exp (-i\omega t) \}$, ${\vec{\wp}}({\bf r}
,t)=\Re e \{ {\bf p}({\bf r})\exp (-i\omega t) \}$; ${\bf E}({\bf r})$, $
{\bf B}({\bf r})$ and ${\bf p}({\bf r})$ being complex functions of position in the space, and $\Re e$ denoting the real part. Then, the time–averaged Lorentz force over a time interval $T$ large compared to $2\pi /\omega$ [@bornwolf99pp34] is
$$\langle {\bf F}({\bf r})\rangle =\frac{1}{4T}\int_{-T/2}^{T/2}dt\left[ {{{{{(
{\bf p}+{\bf p}^{\ast })\cdot \nabla ({\bf E}+{\bf E}^{\ast })+\frac{1}{c}
\left( \frac{\partial {\bf p}}{\partial t}+\frac{\partial {\bf p}^{\ast }}{
\partial t}\right) \times ({\bf B}+{\bf B}^{\ast })}}}}}\right] ,
\label{eq:averaging}$$
where $\ast $ denotes complex conjugate. On substituting in Equation (\[eq:averaging\]) ${\bf E}$, ${\bf B}$, and ${\bf p}$ by their time harmonic expressions given above and performing the integral, one obtains for each $
i^{th}$–Cartesian component of the force
$$\langle F_{j}({\bf r})\rangle =\frac{1}{2}\Re e \left\{ p_{k}\frac{\partial
E_{j}^{\ast }({\bf r})}{\partial x_{k}}+\frac{1}{c}\epsilon _{jkl}\frac{
\partial p_{k}}{\partial t}B_{l}^{\ast }\right\} . \label{eq:chaumetinicio}$$
In Equation (\[eq:chaumetinicio\]) $j=1,2,3$, $\epsilon _{jkl}$ is the completely antisymmetric Levy–Civita tensor. On using the Maxwell equation ${\bf B}
=(c/i\omega )\nabla \times {\bf E}$ and the relationships ${\bf p}=\alpha
{\bf E}$ and $\partial {\bf p}/\partial t=-i\omega {\bf p}$, $\alpha $ being the particle polarizability, Equation (\[eq:chaumetinicio\]) transforms into
$$\langle F_{j}({\bf r})\rangle =\frac{1}{2}\Re e
\left\{ {{{{{\alpha \left( E_{k}
\frac{\partial E_{j}^{\ast }({\bf r})}{\partial x_{k}}+\epsilon
_{jkl}~\epsilon _{lmn}E_{k}\frac{\partial E_{n}^{\ast}}{\partial x_{m}}
\right) }}}}}\right\} . \label{eq:chaumetmedio}$$
Since $\epsilon _{jkl}\epsilon _{lmn}=\delta _{jm}\delta _{kn}-\delta
_{jn}\delta _{km}$, one can finally express the time–averaged Lorentz force on the small particle as [@chaumet00c]
$$\langle F_{j}({\bf r})\rangle =\frac{1}{2}\Re e \left\{ {{{{{\alpha E_{k}\frac{
\partial E_{k}^{\ast }({\bf r})}{\partial x_{j}}}}}}}\right\} .
\label{eq:chaumetfin}$$
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: 'We study here properties of [*free Generalized Inverse Gaussian distributions*]{} (fGIG) in free probability. We show that in many cases the fGIG shares similar properties with the classical GIG distribution. In particular we prove that fGIG is freely infinitely divisible, free regular and unimodal, and moreover we determine which distributions in this class are freely selfdecomposable. In the second part of the paper we prove that for free random variables $X,Y$ where $Y$ has a free Poisson distribution one has $X\stackrel{d}{=}\frac{1}{X+Y}$ if and only if $X$ has fGIG distribution for special choice of parameters. We also point out that the free GIG distribution maximizes the same free entropy functional as the classical GIG does for the classical entropy.'
author:
- |
Takahiro Hasebe\
Department of Mathematics,\
Hokkaido University\
thasebe@math.sci.hokudai.ac.jp
- |
Kamil Szpojankowski\
Faculty of Mathematics and Information Science\
Warsaw University of Technology\
k.szpojankowski@mini.pw.edu.pl
title: On free generalized inverse gaussian distributions
---
Introduction
============
Free probability was introduced by Voiculescu in [@Voi85] as a non-commutative probability theory where one defines a new notion of independence, so called freeness or free independence. Non-commutative probability is a counterpart of the classical probability theory where one allows random variables to be non-commutative objects. Instead of defining a probability space as a triplet $(\Omega,\mathcal{F},\mathbb{P})$ we switch to a pair $(\mathcal{A},\varphi)$ where $\mathcal{A}$ is an algebra of random variables and $\varphi\colon\mathcal{A}\to\mathbb{C}$ is a linear functional, in classical situation $\varphi=\mathbb{E}$. It is natural then to consider algebras $\mathcal{A}$ where random variables do not commute (for example $C^*$ or $W^*$–algebras). For bounded random variables independence can be equivalently understood as a rule of calculating mixed moments. It turns out that while for commuting random variables only one such rule leads to a meaningful notion of independence, the non-commutative setting is richer and one can consider several notions of independence. Free independence seems to be the one which is the most important. The precise definition of freeness is stated in Section 2 below.
Free probability emerged from questions related to operator algebras however the development of this theory showed that it is surprisingly closely related with the classical probability theory. First evidence of such relations appeared with Voiculescu’s results about asymptotic freeness of random matrices. Asymptotic freeness roughly speaking states that (classically) independent, unitarily invariant random matrices, when size goes to infinity, become free.\
Another link between free and classical probability goes via infinite divisibility. With a notion of independence in hand one can consider a convolution of probability measures related to this notion. For free independence such operation is called free convolution and it is denoted by $\boxplus$. More precisely for free random variables $X,Y$ with respective distributions $\mu,\nu$ the distribution of the sum $X+Y$ is called the free convolution of $\mu$ and $\nu$ and is denoted by $\mu\boxplus\nu$. The next natural step is to ask which probability measures are infinitely divisible with respect to this convolution. We say that $\mu$ is freely infinitely divisible if for any $n \geq 1$ there exists a probability measure $\mu_n$ such that $$\mu=\underbrace{\mu_n\boxplus\ldots\boxplus\mu_n}_{\text{$n$ times}}.$$ Here we come across another striking relation between free and classical probability: there exists a bijection between classically and freely infinitely divisible probability measures, this bijection was found in [@BP99] and it is called Bercovici-Pata (BP) bijection. This bijection has number of interesting properties, for example measures in bijection have the same domains of attraction. In free probability literature it is standard approach to look for the free counterpart of a classical distribution via BP bijection. For example Wigner’s semicircle law plays the role of the Gaussian law in free analogue of Central Limit Theorem, Marchenko-Pastur distribution appears in the limit of free version of Poisson limit theorem and is often called free Poisson distribution.
While BP bijection proved to be a powerful tool, it does not preserve all good properties of distributions. Consider for example Lukacs theorem which says that for classically independent random variables $X,Y$ random variables $X+Y$ and $X/(X+Y)$ are independent if and only if $X,Y$ have gamma distribution with the same scale parameter [@Luk55]. One can consider similar problem in free probability and gets the following result (see [@Szp15; @Szp16]) for free random variables $X,Y$ random variables $X+Y$ and $(X+Y)^{-1/2}X(X+Y)^{-1/2}$ are free if and only if $X,Y$ have Marchenko-Pastur (free Poisson) distribution with the same rate. From this example one can see our point - it is not the image under BP bijection of the Gamma distribution (studied in [@PAS08; @HT14]), which has the Lukacs independence property in free probability, but in this context free Poisson distribution plays the role of the classical Gamma distribution.
In [@Szp17] another free independence property was studied – a free version of so called Matsumoto-Yor property (see [@MY01; @LW00]). In classical probability this property says that for independent $X,Y$ random variables $1/(X+Y)$ and $1/X-1/(X+Y)$ are independent if and only if $X$ has a Generalized Inverse Gaussian (GIG) distribution and $Y$ has a Gamma distribution. In the free version of this theorem (i.e. the theorem where one replaces classical independence assumptions by free independence) it turns out that the role of the Gamma distribution is taken again by the free Poisson distribution and the role of the GIG distribution plays a probability measure which appeared for the first time in [@Fer06]. We will refer to this measure as the free Generalized Inverse Gaussian distribution or fGIG for short. We give the definition of this distribution in Section 2.
The main motivation of this paper is to study further properties of fGIG distribution. The results from [@Szp17] suggest that in some sense (but not by means of the BP bijection) this distribution is the free probability analogue of the classical GIG distribution. It is natural then to ask if fGIG distribution shares more properties with its classical counterpart. It is known that the classical GIG distribution is infinitely divisible (see [@BNH77]) and selfdecomposable (see [@Hal79; @SS79]). In [@LS83] the GIG distribution was characterized in terms of an equality in distribution, namely if we take $X,Y_1,Y_2$ independent and such that $Y_1$ and $Y_2$ have Gamma distributions with suitable parameters and we assume that $$\begin{aligned}
X\stackrel{d}{=}\frac{1}{Y_2+\frac{1}{Y_1+X}}\end{aligned}$$ then $X$ necessarily has a GIG distribution. A simpler version of this theorem characterizes smaller class of fGIG distributions by equality $$\begin{aligned}
\label{eq:char}
X\stackrel{d}{=}\frac{1}{Y_1+X}\end{aligned}$$ for $X$ and $Y_1$ as described above.
The overall result of this paper is that the two distributions GIG and fGIG indeed have many similarities. We show that fGIG distribution is freely infinitely divisible and even more that it is free regular. Moreover fGIG distribution can be characterized by the equality in distribution , where one has to replace the independence assumption by freeness and assume that $Y_1$ has free Poisson distributions. While there are only several examples of freely selfdecomposable distributions it is interesting to ask whether fGIG has this property. It turns out that selfdecomposability is the point where the symmetry between GIG and fGIG partially breaks down: not all fGIG distributions are freely selfdecomposable. We find conditions on the parameters of fGIG family for which this distributions are freely selfdecomposable. Except from the results mentioned above we prove that fGIG distribution is unimodal. We also point out that in [@Fer06] it was proved that fGIG maximizes a certain free entropy functional. An easy application of Gibbs’ inequality shows that the classical GIG maximizes the same functional of classical entropy.
The paper is organized as follows: In Section 2 we shortly recall basics of free probability and next we study some properties of fGIG distributions. Section 3 is devoted to the study of free infinite divisibility, free regularity, free selfdecomposability and unimodality of the fGIG distribution. In Section 4 we show that the free counterpart of the characterization of GIG distribution by holds true, and we discuss entropy analogies between GIG and fGIG.
Free GIG distributions
======================
In this section we recall the definition of free GIG distribution and study basic properties of this distribution. In particular we study in detail the $R$-transform of f
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: 'We describe the first-principles design and subsequent synthesis of a new material with the specific functionalities required for a solid-state-based search for the permanent electric dipole moment of the electron. We show computationally that perovskite-structure europium barium titanate should exhibit the required large and pressure-dependent ferroelectric polarization, local magnetic moments, and absence of magnetic ordering at liquid helium temperature. Subsequent synthesis and characterization of Eu$_{0.5}$Ba$_{0.5}$TiO$_3$ ceramics confirm the predicted desirable properties.'
author:
- 'K. Z. Rushchanskii'
- 'S. Kamba'
- 'V. Goian'
- 'P. Vaněk'
- 'M. Savinov'
- 'J. Prokleška'
- 'D. Nuzhnyy'
- 'K. Knížek'
- 'F. Laufek'
- 'S. Eckel'
- 'S. K. Lamoreaux'
- 'A. O. Sushkov'
- 'M. Ležaić'
- 'N. A. Spaldin'
title: 'First-principles design and subsequent synthesis of a material to search for the permanent electric dipole moment of the electron'
---
\
The Standard Model of particle physics incorporates the breaking of the discrete symmetries of parity ($P$) and the combined charge conjugation and parity ($CP$). It is thought however, that the $CP$-violation within the framework of the Standard Model is insufficient to explain the observed matter-antimatter asymmetry of the Universe [@Trodden1999], therefore a so far unknown source of $CP$-violation likely exists in nature. The existence of a non-zero permanent electric dipole moment (EDM) of a particle, such as an electron, neutron, or atom, would violate time reversal ($T$) symmetry (Fig. \[PT\_cartoon\]) and therefore imply $CP$-violation through the $CPT$ theorem [@Khriplovich1997]. In the Standard Model these EDMs are strongly suppressed, the theoretical predictions lying many orders of magnitude below the current experimental limits. However, many theories beyond the Standard Model, such as supersymmetry, contain a number of $CP$-violating phases that lead to EDM predictions within experimental reach [@Bernreuther1991]. Searching for EDMs therefore constitutes a background-free method of probing the $CP$-violating physics beyond the Standard Model.
A number of experimental EDM searches are currently under way or are being developed – systems studied in these experiments include diatomic molecules [@Hudson2002; @Kawall2004], diamagnetic atoms [@Griffith2009; @Guest2007; @Tardiff2007], molecular ions [@Stutz2004], cold atoms [@Weiss2003], neutrons [@Baker2006], liquids [@Ledbetter2005], and solids [@Heidenreich2005; @Bouchard2008] – with one of the most promising novel techniques being electric-field-correlated magnetization measurements in solids [@Shapiro1968; @Lamoreaux2002; @Budker2006]. This technique rests on the fact that, since spin is the only intrinsic vector associated with the electron, a non-vanishing electron EDM is either parallel or antiparallel to its spin and hence its magnetic moment. As a result, when an electric field, which lifts the degeneracy between electrons with EDMs parallel and antiparallel to it, is applied to a sample, the associated imbalance of electron populations generates a magnetization (Fig. \[Zeeman\]). The orientation of the magnetization is reversed when the electric field direction is switched; in our proposed experiment we will monitor this change in sample magnetization using a SQUID magnetometer [@Sushkov2009; @Sushkov2010]. Such [*magnetoelectric responses*]{} in materials with permanent [*macroscopic*]{} magnetizations and polarizations are of great current interest in the materials science community because of their potential for enabling novel devices that tune and control magnetism using electric fields[@Spaldin/Ramesh:2008].
\
Since the experiment aims to detect the intrinsic magnetoelectric response associated with the tiny electric dipole moment of the electron, the design constraints on the material are stringent. First, the solid must contain magnetic ions with unpaired spins, since the equal and opposite spins of paired electrons have corresponding equal and opposite EDMs and contribute no effect. Second, it must be engineered such that the [*conventional*]{} linear magnetoelectric tensor is zero; our approach to achieving this is to use a paramagnet in which the conventional effect is forbidden by time-reversal symmetry[@Fiebig:2005]. To reach the required sensitivity, a high atomic density of magnetic ions ($n\approx 10^{22}$ cm$^{-3}$) is needed, and these magnetic ions must reside at sites with broken inversion symmetry. The energy splitting $\Delta$ shown in Fig. \[Zeeman\] is proportional to the product of the effective electric field experienced by the electron, $E^*$, and its electric dipole moment, $d_e$. The effective electric field, which is equal to the electric field one would have to apply to a free electron to obtain the same energy splitting, is in turn determined by the displacement of the magnetic ion from the center of its coordination polyhedron; for a detailed derivation see Ref. [@Mukhamedjanov2003]. For example, in Eu$_{0.5}$Ba$_{0.5}$TiO$_3$ ceramics (see below) with $\sim$1 $\mu$C/cm$^2$ remanent polarization, the mean displacement of the Eu$^{2+}$ ion with respect to its oxygen cage is 0.01 Å and this results in an effective electric field of $\sim$10 MV/cm, even when no external electric field is applied. We choose a ferroelectric so that it is possible to reverse the direction of the ionic displacements, and hence of the effective electric field, with a moderate applied electric field. Finally, the experiment will be performed inside liquid helium, so the material properties described above must persist at low temperature. A detailed derivation of the dependence of the sensitivity on the material parameters is given in Ref. [@Sushkov2010]. Note that conventional impurities such as defects or domain walls are not detrimental to the experiment since they do not violate time-reversal symmetry. In summary, the following material specifications will allow a sensitive EDM search to be mounted: (i) The material should be ferroelectric, with a large electric polarization, and switchable at liquid He temperature. (ii) There should be a high concentration of ions with local magnetic moments that remain paramagnetic at liquid He temperature; both long-range order and freezing into a glassy state must be avoided. (iii) The local environment at each magnetic ion should be strongly modified by the ferroelectric switching, and (iv) the sample should be macroscopic. With these material properties, and optimal SQUID noise levels, the projected experimental sensitivity is 10$^{-28}$ e.cm after ten days of averaging[@Sushkov2010].
No known materials meet all the requirements. Indeed the contra-indication between ferroelectricity and magnetism has been studied extensively over the last decade in the context of multiferroics [@Hill:2000], where the goal has been to achieve simultaneous ferroelectric and ferromagnetic ordering at high temperature. In spite of extensive efforts, a room temperature multiferroic with large and robust ferroelectricity and magnetization at room temperature remains elusive. While the low temperature constraints imposed here seem at first sight more straightforward, avoiding any magnetic ordering at low temperature, while retaining a high concentration of magnetic ions poses a similarly demanding challenge. In addition the problem of ferroelectric switchability at low temperature is challenging, since coercivities tend to increase as temperature is lowered [@Merz:1951].
We proceed by proposing a trial compound and calculating its properties using density functional theory to determine whether an experimental synthesis should be motivated. We choose an alloy of europium titanate, EuTiO$_3$ and barium titanate, BaTiO$_3$, with motivation as follows: To incorporate magnetism we require unfilled orbital manifolds of localized electrons; to avoid magnetic ordering the exchange interactions should be small. Therefore the tightly bound $4f$ electrons are likely to be the best choice. For conventional ferroelectricity we require transition metal ions with empty $d$ orbitals to allow for good hybridization with coordinating anions on off-centering [@Rondinelli/Eidelson/Spaldin:2009]. (Note that while here we use a conventional ferroelectric mechanism, many alternative routes to ferroelectricity that are compatible with magnetism – and which could form a basis for future explorations – have been recently identified; for a review see Ref. ). Both EuTiO$_3$ and BaTiO$_3$ form in the ABO$_3$ perovskite structure, with divalent Eu$^{2+}$ or Ba$^{2+}$ on the A site, and formally $d^0$ Ti$^{4+}$ on the B site. BaTiO$_3$ is a prototypical ferroelectric with a large room temperature polarization of 25 $\mu$C/cm$^2$.[@Wemple:1968] In the cubic paraelectric phase its lattice constant is 3.996 Å [@Miyake/Ueda:1947]. The Ba$^{2+}$ ion has an inert gas electron configuration and hence zero magnetic moment.
The lattice parameter of EuTiO$_3$ is 3.905 Å [@Katsuf
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: 'In three-dimensional turbulent flows, the flux of energy from large to small scales breaks time symmetry. We show here that this irreversibility can be quantified by following the relative motion of several Lagrangian tracers. We find by analytical calculation, numerical analysis and experimental observation that the existence of the energy flux implies that, at short times, two particles separate temporally slower forwards than backwards, and the difference between forward and backward dispersion grows as $t^3$. We also find the geometric deformation of material volumes, surrogated by four points spanning an initially regular tetrahedron, to show sensitivity to the time-reversal with an effect growing linearly in $t$. We associate this with the structure of the strain rate in the flow.'
author:
- Jennifer Jucha
- Haitao Xu
- Alain Pumir
- Eberhard Bodenschatz
title: 'Time-symmetry breaking in turbulence'
---
In turbulent flows, far from boundaries, energy flows from the scale at which it is injected, $l_I$, to the scale where it is dissipated, $l_D$. For intense three-dimensional turbulence, $l_D \ll l_I$, and the energy flux, ${\epsilon}$, is from large to small scales [@frisch95]. As a consequence, time symmetry is broken, since the time reversal $t \rightarrow -t$ would also reverse the direction of the energy flux. Exploring the implications of this time asymmetry on the relative motion between fluid particles is the aim of this Letter.
The simplest problem in this context concerns the dispersion of two particles whose positions, $\mathbf{r}_1(t)$ and $\mathbf{r}_2(t)$, are separated by $\mathbf{R}(t) = \mathbf{r}_2(t) - \mathbf{r}_1(t)$. The growth of the mean squared separation, $\langle \mathbf{R}^2 (t) \rangle$, forwards ($t>0$) and backwards in time ($t<0$) is a fundamental question in turbulence research [@R26] and is also related to important problems such as turbulent diffusion and mixing [@S01; @SC09]. At long times, both for $t > 0$ and $t < 0$, it is expected that the distance between particles increases according to the Richardson prediction as $ \langle \mathbf{R}^2 (t) \rangle \approx g_{f,b} {\epsilon}|t|^3$ [@SC09], with two constants, $g_f$ and $g_b$, for forward and backward dispersion, respectively. The lack of direct evidence for the Richardson $t^3$ regime in well-controlled laboratory flows [@B06a] or in Direct Numerical Simulations (DNS) [@SC09; @BIC14] makes the determination of the constants $g_f$ and $g_b$ elusive, although it is expected that $g_b > g_f$ [@SC09; @SYB05; @B06].
In this Letter we show that [for short times]{} the flow irreversibility imposes a quantitative relation between forward and backward particle dispersion. For particle pairs, the energy flux through scales is captured by $$\left\langle \frac{d}{dt} \left[\mathbf{v}_2(t) - \mathbf{v}_1(t) \right]^2 \Big|_0 \right\rangle = - 4 {\epsilon},
\label{eq:flux_lag}$$ where $\mathbf{v}_{1}(t) $ and $\mathbf{v}_{2}(t)$ are the Lagrangian velocities of the particles and the average is taken over all particle pairs with the same initial separation, $ | \mathbf{R}(0) | =R_0$, in the inertial subrange ($l_D \ll R_0 \ll l_I$). Equation (\[eq:flux\_lag\]) is exact in the limit of very large Reynolds number [@MOA99; @FGV01; @PSC01] and can be seen as the Lagrangian version of the Kolmogorov 4/5-law [@frisch95]. For short times, Eq. (\[eq:flux\_lag\]) implies that backward particle dispersion is faster than the forward case, with $$\langle \mathbf{R}^2(-t) \rangle - \langle \mathbf{R}^2(t) \rangle = 4 {\epsilon}t^3 + {\mathcal{O}}(t^5).
\label{eq:diff_bac_for}$$ The $t^3$ power in Eq. (\[eq:diff\_bac\_for\]) is strongly reminiscent of the Richardson prediction, with the expectation that $g_b > g_f$ at longer times. The relation between the irreversibility predicted by Eq. (\[eq:diff\_bac\_for\]) and the one expected at longer times ($g_b > g_f$), however, remains to be established.
Whereas the difference between backward and forward pair dispersion at short times is weak ($\propto t^3$), we found a strong manifestation of the time asymmetry when investigating multi-particle dispersion. The analysis of the deformation of an initially regular tetrahedron consisting of four tracer particles [@PSC00; @XOB08] reveals a stronger flattening of the shape forwards in time, but a stronger elongation backwards in time. We relate the observed time asymmetry in the shape deformation to a fundamental property of the flow [@Betchov56; @Siggia81; @Ashurst87; @Pumir13] by investigating the structure of the perceived rate of strain tensor based on the velocities of the four Lagrangian particles [@XPB11].
Our finding relies on analytical calculation, DNS, and data from 3D Lagrangian particle tracking in a laboratory flow. The experiments were conducted with a von Kármán swirling water flow. The setup consisted of a cylindrical tank with a diameter of $\unit{48.3}{\centi\meter}$ and a height of $\unit{60.5}{\centi\meter}$, with counterrotating impellers installed at the top and bottom. Its geometry is very similar to the one described in Ref. [@O06], but with a slightly different design of the impellers to weaken the global structure of the flow. At the center of the tank, where the measurements were performed, the flow is nearly homogeneous and isotropic. As tracers for the fluid motion, we used polystyrene microspheres of density $\rho=1.06\, \rho_{\text{water}} $ and a diameter close to the Kolmogorov length scale, $\eta$. We measured the trajectories of these tracers using Lagrangian particle tracking with sampling rates exceeding 20 frames per Kolmogorov time scale, $\tau_\eta$ [@O06a; @X08]. We obtained three data sets at $R_\lambda=270$, $350$ and $690$, with corresponding Kolmogorov scales $\eta=\unit{105}{\micro\meter}$, $\unit{66}{\micro\meter}$, and $\unit{30}{\micro\meter}$ and $\tau_\eta=\unit{11.1}{\milli\second}$, $\unit{4.3}{\milli\second}$, and $\unit{0.90}{\milli\second}$, respectively. The integral length scales of $L\approx\unit{5.5}{\centi\meter}$ for the first two and $L\approx\unit{7.0}{\centi\meter}$ for the last data set are both smaller than the size of the measurement volume, which is approximately $(\unit{8}{\centi\meter})^3$. Many independent, one-second recordings of $\sim 100$ particles where combined to generate sufficient statistics. For example, the $R_\lambda = 690$ dataset contains 555,479 particle trajectories lasting at least $20 \tau_\eta$. Our experimental results are compared to DNS data obtained from pseudo-spectral codes [@vosskuhle:2013; @li2008; @Y12].
To study the dispersion between two particles, it is more convenient to analyze the change in separation, $\delta \mathbf{R}(t) = \mathbf{R}(t) - \mathbf{R}(0)$, than the separation $\mathbf{R}(t)$ itself [@B50; @O06; @SC09]. We expand $\delta \mathbf{R}(t)$ in a Taylor series and average over many particle pairs with a fixed initial separation $ | \mathbf{R}(0)|=R_0$ to obtain $$\frac{\langle \delta \mathbf{R}(t)^2\rangle}{R_0^2} =
\frac{\langle \mathbf{u}(0)^2\rangle}{R_0^2} t^2
+ \frac{\left\langle \mathbf{u}(0) \cdot \mathbf{a}(0) \right\rangle}{R_0^2} t^3
+ {\mathcal{O}}(t^4) ,
\label{eq:evol_dR2}$$ where $\mathbf{u}(0)$ and $\mathbf{a}(0)$ are the relative velocity and acceleration between the two particles at time $t=0$. Using Eq. reduces the $t^3$ term in Eq. to $-2 (t/t_0)^3$, where $t_0 = (R_0^2/{\epsilon})^{1/3}$ is the (Kolmogorov) time scale characteristic of the motion of eddies of size $R_0$ [@frisch95]. Eq. can thus be expressed as $$\frac{\
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: 'The discovery of dynamic memory effects in the magnetization decays of spin glasses in 1983 marked a turning point in the study of the highly disordered spin glass state. Detailed studies of the memory effects have led to much progress in understanding the qualitative features of the phase space. Even so, the exact nature of the magnetization decay functions have remained elusive, causing confusion. In this letter, we report strong evidence that the Thermoremanent Magnetization (TRM) decays scale with the waiting time, $t_{w}$. By employing a series of cooling protocols, we demonstrate that the rate at which the sample is cooled to the measuring temperature plays a major role in the determination of scaling. As the effective cooling time, $t_{c}^{eff}$, decreases, $\frac {t}{t_{w}}$ scaling improves and for $t_{c}^{eff}<20s$ we find almost perfect $\frac{t}{t_{w}}$ scaling, i.e full aging.'
author:
- 'G. F. Rodriguez'
- 'G. G. Kenning'
- 'R. Orbach'
title: Full Aging in Spin Glasses
---
Since the discovery of aging effects in spin glasses approximately twenty years ago[@Cham83][@Lund83], much effort has gone into determining the exact time dependence of the memory decay functions. In particular, memory effects show up in the Thermoremanent Magnetization (TRM) (or complementary Zero-Field Cooled (ZFC) magnetization) where the sample is cooled through its spin glass transition temperature in a small magnetic field (zero field) and held in that particular field and temperature configuration for a waiting time, $t_{w}$. At time $t_{w}$, a change in the magnetic field produces a very long time decay in the magnetization. The decay is dependent on the waiting time. Hence, the system has a memory of the time it spent in the magnetic field. A rather persuasive argument[@Bou92] suggests that for systems with infinite equilibration times, the decays must scale with the only relevant time scale in the experiment, $t_{w}$. This would imply that plotting the magnetization on a t/$t_{w}$ axis would collapse the different waiting time curves onto each other. This effect has not been observed.
What has been observed[@Alba86] is that the experimentally determined magnetization decays will scale with a modified waiting time, $(t_{w})^\mu$. Where $\mu$ is a fitting parameter. For $\mu<1$ the system is said to have subaged. A $\mu>1$ is called superaging and $\mu=1$ corresponds to full aging. For TRM experiments a $\mu$ of approximately 0.9 is found for different types of spin glasses[@Alba86; @Ocio85], over a wide range of reduced temperatures indicating subaging. At very low temperatures and temperatures approaching the transition temperature, $\mu$ is observed to decrease from the usual 0.9 value. Superaging has been observed in Monte Carlo simulations of spin glasses[@Sibani]. This has led to confusion as to the exact nature of scaling.
Zotev et al.[@Zov02] have suggested that the departures from full $\frac{t}{t_{w}}$ scaling, observed in aging experiments, are mainly due to cooling effects. In a real experimental environment, the situation is complicated by the time it takes for the sample to cool to its measuring temperature. An effect due to the cooling rate at which the sample temperature approaches the measuring temperature has been known[@Nord87; @Nord00]. This effect is not trivial, it does not contribute a constant time to $t_{w}$.
Another possible explanation for the deviation from full aging comes from the widely held belief that the magnetization decay is an additive combination of a stationary term ($M_{Stat} = A
(\tau_{0} / t)^{\alpha})$ and an aging term ($M =
f(\frac{t}{t_{w}})$ )[@Cou95; @Bou95; @Vin96]. Subtraction of a stationary term, where $\tau_{0}$ is a microscopic spin flipping time, A is a dimensionless constant and $\alpha$ is a parameter determined from $\chi''$ measurements, was shown to increase $\mu$ from 0.9 to 0.97[@Vin96].
In this letter we analyze effects of the cooling time through a series of different cooling protocols and we present the first clear and unambiguous experimental evidence that the TRM decays scale as $\frac{t}{t_{w}}$(i.e. full aging).
Three different methods have been regularly employed to understand the scaling of the TRM decays. The first and simplest is to scale the time axis of the magnetization decay with the time the sample has spent in a magnetic field (i.e.$\frac{t}{t_{w}}$)[@Bou92]. If the decays scale as a function of waiting time it would be expected that the decay curves would overlap. This has not yet been observed.
A second more sophisticated method was initially developed by Struik[@Stu79] for scaling the dynamic mechanical response in glassy polymers and first applied to spin glasses by Ocio et al.[@Ocio85]. This method plots the log of the reduced magnetization $M/M_{fc}$ ($M_{fc}$ is the field cooled magnetization), against an effective waiting time $\xi=\frac{\lambda}{t_{w}^{\mu}}$ where
$$\begin{aligned}
\lambda = \frac{t_{w}}{1-\mu}[(1+\frac{t}{t_{w}})^{1-\mu} -
1];~~~~\mu < 1 \label{eq:one}\end{aligned}$$
or $$\begin{aligned}
\lambda = t_{w} \log[1+\frac{t}{t_{w}}];~~~~~~~~~~~~~~~~\mu = 1
\label{eq:two}\end{aligned}$$ A value of $\mu$ = 1 would correspond to perfect $t/t_{w}$ scaling. Previous values of $\mu$ obtained on the decays using this method have varied from .7 to .94[@Alba86] for a temperature range $.2<T_{r}<.95$. A value of $\mu<1$ is called subaging.
Finally a peak in the function S(t)
$$\begin{aligned}
S(t)=-\frac{1}{H}\frac{dM(t)}{d[Log_{10}(t)]} \label{eq:three}\end{aligned}$$
as a function of time has been shown to be an approximately linear function of the waiting time[@Lund83]. This peak occurs at a time slightly larger then the waiting time, again suggesting possible subaging.
In this study we use all three of the above scaling procedures to analyze the data we have produced with different cooling protocols. All measurements in this letter were performed on our homebuilt DC SQUID magnetometer with a $Cu_{.94}Mn_{.06}$ sample. The sample is well documented[@Ken91] and has been used in many other studies. The measurements described in this letter were performed in the following manner: The sample was cooled, in a magnetic field of 20 G, from 35 K through its transition temperature of 31.5 K to a measuring temperature of 26 K. This corresponds to reduced temperature of .83 $T_{g}$. The sample was held at this temperature for a waiting time $t_{w}$, after which time the magnetic field was rapidly decreased to 0G. The resulting magnetization decay is measured 1s after field cutoff to a time greater than or equal to 5$t_{w}$. The only parameters we have varied in this study are $t_{w}$ and the rate and profile at which we cool the sample through the transition temperature to the measuring temperature. The sample is located on the end of the sapphire rod and sits in the upper coil of a second order gradiometer configuration. The temperature measuring thermometer is located 12.5 cm above the sample. Heat is applied to the sample through a heater coil located on the same sapphire rod 17 cm above the sample. Sample cooling occurs by heat transfer with the He bath via a constant amount of He exchange gas, which was previously introduced into each chamber of the double vacuum jacket. We have measured the decay time of our field coil and find that we can quench the field in less then 0.1ms. We have also determined that without a sample, our system has a small reproducible exponential decay, that decays to a constant value less than the system noise within 400 seconds. In order to accurately describe our data we subtract this system decay from all of the data.
In this paper we present TRM data for eight waiting times ($t_{w}$= 50s, 100s, 300s, 630s, 1000s, 3600s, 6310s, and 10000s). The same TRM experiments were performed for six different cooling protocols. In this paper we use four of the cooling protocols. Figure 1 (top row) is a plot of temperature vs. time for four of the cooling protocols. These different cooling protocols, were achieved, by varying applications of heat and by varying the amount of exchange gas in the vacuum jackets. A more detailed description of the cooling protocols will be given in a followup publication. In Figure 1 (bottom row) we plot S(t) (Eq $\ref{eq:three}.)$ of the ZTRM protocol (i.e. zero waiting time TRM) in order to characterize a time associated with the cooling protocol, $t_{c}^{eff}$. As observed in Figure 1 we have achieved effective cooling times ranging from 406s down to
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: 'We present an atomistic self-consistent study of the electronic and transport properties of semiconducting carbon nanotube in contact with metal electrodes of different work functions, which shows simultaneous electron and hole doping inside the nanotube junction through contact-induced charge transfer. We find that the band lineup in the nanotube bulk region is determined by the effective work function difference between the nanotube channel and source/drain electrodes, while electron transmission through the SWNT junction is affected by the local band structure modulation at the two metal-nanotube interfaces, leading to an effective decoupling of interface and bulk effects in electron transport through nanotube junction devices.'
author:
- 'Yongqiang Xue$^{1,*}$ and Mark A. Ratner$^{2}$'
title: 'Electron transport in semiconducting carbon nanotubes with hetero-metallic contacts'
---
Devices based on single-wall carbon nanotubes (SWNTs) [@Dekker; @DeMc] have been progressing in a fast pace, e.g., the performance of carbon nanotube field-effect transistors (NTFET) is approaching that of the state-of-the-art silicon Metal-Oxide-Semiconductor field-effect transistors (MOSFET). [@AvFET; @DaiFET; @McFET] But a general consensus on the physical mechanisms and theoretical models remains to appear. A point of continuing controversy in NTFET has been the effect of Schottky barriers at the metal-SWNT interface. [@Barrier; @AvFET1] Since SWNTs are atomic-scale nanostructures in both the axial and the circumferential dimensions, any barrier that may form at the interface has a finite thickness and a finite width. [@AvFET; @XueNT; @AvFET2] In general a microscopic treatment of both the source/drain and gate field modulation effect will be needed to account for faithfully the atomistic nature of the electronic processes in NTFET.
Since the characteristics of the NTFETs depend sensitively on the gate geometry, [@AvFET] a thorough understanding of the Schottky barrier effect in the simpler two-terminal metal-SWNT-metal junction devices is essential in elucidating the switching effect caused by applying a finite gate voltage. [@XueNT] As a basic device building block, the two-terminal device is also of interests for applications in electromechanical and electrochemical sensors, where the conduction properties of the SWNT junctions are modulated by mechanical strain [@NTMe] or molecular adsorption respectively. [@NTCh] Previous works have considered symmetric SWNT junctions with different contact geometries. [@XueNT] Here we consider SWNT in contact with metallic electrodes of different work functions. Such hetero-metallic junctions are of interests since: (1) The electrode work function difference leads to a contact potential and finite electric field (built-in field) across the junction at equilibrium. A self-consistent analysis of the hetero-metallic junction can shed light on the screening of the applied field by the SWNT channel and the corresponding band bending effect even at zero bias; (2) For SWNTs not intentionally doped, electron and hole doping can be induced simultaneously inside the channel by contacting with high and low work function metals; (3) Since the metallurgy of the metal-SWNT contact is different at the two interfaces, the asymmetric device structure may facilitate separating interface effect on electron transport from the intrinsic property of the SWNT channel.
The hetero-metallic SWNT junction is shown schematically in Fig. \[xueFig1\], where the ends of an infinitely long SWNT wire are buried inside two semi-infinite metallic electrodes with different work functions. The embedded contact scheme is favorable for the formation of low-resistance contact. For simplicity, we assume the embedded parts of the SWNT are surrounded entirely by the metals with overall cylindrical symmetry around the SWNT axis. [@Note1] For comparison with previous work on symmetric SWNT junctions, we investigate $(10,0)$ SWNTs (with work function of $4.5$ eV [@Dekker]) in contact with gold (Au) and titanium (Ti) electrodes (with work functions of $5.1$ and $4.33$ eV respectively for polycrystalline materials [@CRC]). Choosing the electrostatic potential energy in the middle of the junction and far away from the cylindrical surface of the SWNT as the energy reference, the Fermi-level of the Au-SWNT-Ti junction is the negative of the average metal work functions $E_{F}=-4.715$ eV. The SWNT channel length investigated ranges from $L=2.0,4.1,8.4,12.6,16.9$ nm to $21.2$ nm, corresponding to number of unit cells of $5,10,20,30,40$ and $50$ respectively. We calculate the transport characteristics within the coherent transport regime, as appropriate for such short nanotubes. [@Phonon]
Using a Green’s function based self-consistent tight-binding (SCTB) theory, we analyze the Schottky barrier effect by examining the electrostatics, the band lineup and the transport characteristics of the hetero-metallic SWNT junction as a function of the SWNT channel length. The SCTB model is essentially the semi-empirical implementation of the self-consistent Matrix Green’s function method for *ab initio* modeling of molecular-scale devices, [@XueMol] which takes fully into account the three-dimensional electrostatics and the atomic-scale electronic structure of the SWNT junctions and has been described in detail elsewhere. [@XueNT; @Note2] The SCTB model starts with the semi-empirical Hamiltonian $H_{0}$ of the bare $(10,0)$ SWNT wire using the Extended Huckel Theory (EHT) with non-orthogonal ($sp$) basis sets $\phi_{m}(\vec r)$. [@Hoffmann88] We describe the interaction between the SWNT channel and the rest of the junction using matrix self-energy operators and calculate the density matrix $\rho_{ij}$ and therefore the electron density of the equilibrium SWNT junction from $$\begin{aligned}
\label{GE}
G^{R}
&=& \{ (E+i0^{+})S-H-\Sigma_{L}(E)-\Sigma_{L;NT}(E)
-\Sigma_{R}(E)-\Sigma_{R;NT}(E)\}^{-1}, \\
\rho &=& \int \frac{dE}{2\pi }Imag[G^{R}](E)f(E-E_{F}).\end{aligned}$$ Here $S$ is overlap matrix and $f(E-E_{F})$ is the Fermi distribution in the electrodes. Compared to the symmetric SWNT junctions, here the Hamiltonian describing the SWNT channel $H=H_{0}+\delta V[\delta \rho]+V_{ext}$ includes the contact potential $V_{ext}$ (taken as linear voltage ramp here) in addition to the charge-transfer induced electrostatic potential change $\delta V$ ($\delta \rho$ is the density of transferred charge).
The calculated charge transfer per atom and electrostatic potential change along the cylindrical surface of the SWNT for the Au-SWNT-Ti junction are shown in Fig. (\[xueFig2\]). Previous works [@XueNT] have shown that by contacting to the high (low)-work function metal Au (Ti), hole (electron) doping is induced inside the SWNT channel. Here we find simultaneous electron and hole doping inside the SWNT channel for the hetero-metallic Au-SWNT-Ti junction (lower figure in Fig. \[xueFig2\](a)). Since the magnitude of hole doping inside the Au-SWNT-Au junction ($\approx -5.6 \times 10^{-4}$/atom) is much larger than that of the electron doping inside the Ti-SWNT-Ti junction ($\approx 3 \times 10^{-5}$/atom) due to the larger work function difference, the majority of the channel remains hole-doped inside the Au-SWNT-Ti junction. Due to the localized nature of interface bonding, the charge transfer pattern immediately adjacent to the Au(Ti)-SWNT interface remains similar to that of the Au-SWNT-Au (Ti-SWNT-Ti) junction both in magnitude and shape. The short-wavelength oscillation in the transferred charge inside the SWNT channel reflects the atomic-scale variation of charge density within the unit cell of the SWNT. [@XueNT; @Tersoff02]
The contact-induced doping affects the transport characteristics by modulating the electrostatic potential profile along the SWNT junction. We find that inside the SWNT channel, the built-in electric field is screened effectively by the delocalized $\pi$-electron of carbon. So the net electrostatic potential change along the cylindrical surface ($V_{ext}+\delta V[\delta \rho]$) is much more flat than the linear voltage ramp denoting the contact potential except close to the metal-SWNT interface (lower figure of Fig. \[xueFig2\](b)), where its shape remains qualitatively similar to that at the Au (Ti)-SWNT interface of the Au-SWNT-Au (Ti-SWNT-Ti) junction. Due to the confined cylindrical structure of the SWNT channel, the charge-transfer induced electrostatic potential change $\delta V$ decays rapidly in the direction perpendicular to the SWNT axis. This has led to a different physical picture of band bending in symmetric SWNT junctions. [@XueNT] In particular, the band lineup inside the SWNT channel has been found to depend mainly on the
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: 'Multiplicity distributions of charged particles for pp collisions at LHC Run 1 energies, from $\sqrt{s}=$ 0.9 to 8 TeV are measured over a wide pseudorapidity range ($-3.4<\eta<5.0$) for the first time. The results are obtained using the Forward Multiplicity Detector and the Silicon Pixel Detector within ALICE. The results are compared to Monte Carlo simulations, and to the IP-Glasma model.'
address: 'Niels Bohr Institute, University of Copenhagen, Copenhagen, Denmark'
author:
- 'Valentina Zaccolo, on behalf of the ALICE Collaboration'
bibliography:
- 'biblio\_QM.bib'
title: 'Charged-Particle Multiplicity Distributions over a Wide Pseudorapidity Range in Proton-Proton Collisions with ALICE'
---
charged-particle multiplicity distributions ,pp collisions ,saturation models ,forward rapidity
Introduction {#Intro}
============
The multiplicity distribution of charged particles ($ N_{\text{ch}}$) produced in high energy pp collisions, $\text{P}(N_{\text{ch}})$, is sensitive to the number of collisions between quarks and gluons contained in the colliding protons and, in general, to the mechanisms underlying particle production. In particular, $\text{P}(N_{\text{ch}})$ is a good probe for the saturation density of the gluon distribution in the colliding hadrons. The pp charged-particle multiplicity distributions are measured for five gradually larger pseudorapidity ranges. The full description of the ALICE detector is given in [@Aamodt:2008zz]. In this analysis, only three subdetectors are used, namely, the V0 detector [@Abbas:2013taa], the Silicon Pixel Detector (SPD) [@Aamodt:2008zz] and the Forward Multiplicity Detector (FMD) [@Christensen:2007yc] to achieve the maximum possible pseudorapidity coverage ($-3.4<\eta<5.0$).
Analysis Procedure {#Analysis}
==================
Three different collision energies (0.9, 7, and 8 TeV) are analyzed here. Pile-up events produce artificially large multiplicities that enhance the tail of the multiplicity distribution, therefore, special care was taken to avoid runs with high pile up. For the measurements presented here, the pile-up probability is of $\sim2\%$. The fast timing of the V0 and SPD are used to select events in which an interaction occurred and events are divided into two trigger classes. The first class includes all inelastic events (INEL) which is the same condition as used to select events where an interaction occurred (this is called the MB$_{\text{OR}}$ trigger condition). The second class of events requires a particle to be detected in both the V0A and the V0C (MB$_{\text{AND}}$ trigger condition). This class is called the Non-Single-Diffractive (NSD) event class, where the majority of Single-Diffractive events are removed.
The FMD has nearly 100$\%$ azimuthal acceptance, but the SPD has significant dead regions that must be accounted for. On the other hand, interactions in detector material will increase the detected number of charged particles and have to be taken into account. The main ingredients necessary to evaluate the primary multiplicity distributions are the raw (detected) multiplicity distributions and a matrix, which converts the raw distribution to the true primary one. The raw multiplicity distributions are determined by counting the number of clusters in the SPD acceptance, the number of energy loss signals in the FMD [@Abbas:2013bpa], or the average between the two if the acceptance of the SPD and FMD overlap. The response of the detector is determined by the matrix $R_{\text{mt}}$ which, when normalized, is the probability that an event with true multiplicity t and measured multiplicity m occurs. This matrix is obtained using Monte Carlo simulations, in this case the PYTHIA ATLAS-CSC flat tune [@d'Enterria:2011kw], where the generated particles are propagated through the detector simulation code (in this case GEANT [@Brun:1994aa]) and then through the same reconstruction steps as the actual data. The response matrix is obtained from an iterative application of Bayes’ unfolding [@2010arXiv1010.0632D].
[0.39]{} ![Charged-particle multiplicity distributions for NSD pp collisions at $\sqrt{s}=0.9$ and 8 TeV. The lines show fits to the data using double NBDs (eq. \[eq2\]). Ratios of the data to the fits are also shown.[]{data-label="V0AND900"}](2015-Sep-21-results_0_1.pdf "fig:"){width="\textwidth"}
[0.39]{} ![Charged-particle multiplicity distributions for NSD pp collisions at $\sqrt{s}=0.9$ and 8 TeV. The lines show fits to the data using double NBDs (eq. \[eq2\]). Ratios of the data to the fits are also shown.[]{data-label="V0AND900"}](2015-Sep-21-results_2_1.pdf "fig:"){width="\textwidth"}
The probability that an event is triggered, at all, depends on the multiplicity of produced charged particles. At low multiplicities large trigger inefficiencies exist and must be corrected for. The event selection efficiency, $\epsilon_{\text{TRIG}}$, is defined dividing the number of reconstructed events with the selected hardware trigger condition and with the reconstructed vertex less than 4 cm from the nominal IP by the same quantity but for the true interaction classification: $\epsilon_{\text{TRIG}}=N_{\text{ch,reco}}/N_{\text{ch,gen}}$. The unfolded distribution is corrected for the vertex and trigger inefficiency by dividing each multiplicity bin by its $\epsilon_{\text{TRIG}}$ value. Diffraction was implemented using the Kaidalov-Poghosyan model [@Kaidalov:2009aw] to tune the cross sections for diffractive processes (the measured diffraction cross–sections at LHC and the shapes of the diffractive masses $M_{\text{X}}$ are implemented in the Monte-Carlo models used for the $\epsilon_{\text{TRIG}}$ computation).
Results {#Results}
=======
The multiplicity distributions have been measured for the two event classes (INEL and NSD) for pp collisions at $\sqrt{s}=$ 0.9, 7, and 8 TeV. Fits to the sum of two Negative Binomial Distributions (NBDs) have been performed here and are plotted together with the results in Figs. \[V0AND900\] and \[V0AND7000\]. The distributions have been fitted using the function $$\label{eq2}
\text{P}(n)=\lambda[\alpha \text{P}_{NBD}(n,\langle n\rangle_{\text{1}},k_{\text{1}})+(1-\alpha)\text{P}_{NBD}(n,\langle n\rangle_{\text{2}},k_{\text{2}})]$$ To account for NBDs not describing the 0–bin and the first bins for the wider rapidities (and therefore removing that bin from the fit), a normalization factor $\lambda$ is introduced. The $\alpha$ parameter reveals the fraction of soft events. It is lower for higher energies and for wider pseudorapidity ranges, where the percentage of semi–hard events included is higher: $\alpha\backsim65\%$ for $\vert\eta\vert<2.0$ at $\sqrt{s}=$ 0.9 TeV and $\alpha\backsim35\%$ for $-3.4<\eta<5.0$ at 7 and 8 TeV. $\langle n\rangle_{\text{1}}$ is the average multiplicity of the soft (first) component, while $\langle n\rangle_{\text{2}}$ is the average for the semi–hard (second) component. The parameters $k_{\text{1,2}}$ represent the shape of the two components of the distribution.
In Fig. \[V0AND900\], the obtained multiplicity distributions for 0.9 TeV and 8 TeV for the NSD event class are shown for five pseudorapidity ranges, $\vert\eta\vert<2.0$, $\vert\eta\vert<2.4$, $\vert\eta\vert<3.0$, $\vert\eta\vert<3.4$ and $-3.4<\eta<5.0$. The distributions are multiplied by factors of 10 to allow all distributions to fit in the same figure without overlapping. Figure \[V0AND7000\] shows the results for the INEL event classes for collisions at 7 TeV (left plot). Comparisons with distributions obtained with the PYTHIA 6 Perugia 0 tune [@Skands:2010ak], PYTHIA 8 Monash tune [@Sjostrand:2014zea], PHOJET [@Bopp:1998rc] and EPOS LHC [@Pierog:2013ria] Monte Carlo generators are shown for INEL events at 7 TeV (right plot) . Both PHOJET and the PYTHIA 6 strongly underestimate the multiplicity distributions. PYTHIA 8 reproduces well the tails for the wider pseudorapidity range, but shows an enhancement in the peak region. EPOS with the LHC tune models well the distributions, both in the first bins, which are dominated by diffractive events, and in the tails.
[0.39]{} ![Left: charged-particle multiplicity distributions for INEL pp collisions at $\sqrt{s}=7$ TeV. The lines show fits
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: 'Online social networks (OSNs) are ubiquitous attracting millions of users all over the world. Being a popular communication media OSNs are exploited in a variety of cyber-attacks. In this article, we discuss the [*chameleon* ]{}attack technique, a new type of OSN-based trickery where malicious posts and profiles change the way they are displayed to OSN users to conceal themselves before the attack or avoid detection. Using this technique, adversaries can, for example, avoid censorship by concealing true content when it is about to be inspected; acquire social capital to promote new content while piggybacking a trending one; cause embarrassment and serious reputation damage by tricking a victim to like, retweet, or comment a message that he wouldn’t normally do without any indication for the trickery within the OSN. An experiment performed with closed Facebook groups of sports fans shows that (1) [*chameleon* ]{}pages can pass by the moderation filters by changing the way their posts are displayed and (2) moderators do not distinguish between regular and [*chameleon* ]{}pages. We list the OSN weaknesses that facilitate the [*chameleon* ]{}attack and propose a set of mitigation guidelines.'
author:
- 'Aviad Elyashar, Sagi Uziel, Abigail Paradise, and Rami Puzis'
bibliography:
- 'references.bib'
title: 'The Chameleon Attack: Manipulating Content Display in Online Social Media'
---
Introduction {#sec:introduction}
============
The following scenario is not a conventional introduction. Rather, it’s a brief example to stress the importance and potential impact of the disclosed weakness, unless the countermeasures described in this article are applied.
\[ex:teaser\] Imagine a controversial Facebook post shared by a friend of yours. You have a lot to say about the post, but you would rather discuss it in person to avoid unnecessary attention online. A few days later when you talk with your friend about the shared post, the friend does not understand what you’re referring to. Both of you scan through his/her timeline and nothing looks like that post. The next day you open Facebook and discover that in the last six months you have joined three Facebook groups of Satanists; you actively posted on a page supporting an extreme political group (although your posts are not directly related to the topics discussed there), and you liked several websites leading to video clips with child abuse. A terrible situation that could hurt your good name especially if you are a respected government employee!
At the time of submission of this article, the nightmare described in Example \[ex:teaser\] is still possible in major online social networks (OSNs) (see Section \[sec:susceptibility\]) due to a conceptual design flaw.
Today, OSNs are an integral part of our lives [@boyd2007social]. They are powerful tools for disseminating, sharing and consuming information, opinions, and news [@kwak2010twitter]; and for expanding connections [@gilbert2009predicting], etc. However, OSNs are also constantly abused by cybercriminals who exploit them for malicious purposes, including spam and malware distribution [@lee2010uncovering], harvesting personal information [@boshmaf2011socialbot], infiltration [@elyashar2013homing], and spreading misinformation [@ferrara2015manipulation]. Bots, fake profiles, and fake information are all well-known scourges being tackled by OSN providers, academic researchers, and organizations around the world with various levels of success. It is extremely important to constantly maintain the content of social platforms and service-wise, in order to limit abuse as much as possible.
To provide the best possible service to their users, OSNs allow users to edit or delete published content [@facebook_help_edit_post], edit user profiles, and update previews of linked resources, etc. These features are important to keep social content up to date, to correct grammatical or factual errors in published content, and eliminate abusive content. Unfortunately, they also open an opportunity for a scam where OSN users are tricked into engaging with seemingly appealing content that is later modified. This type of scam is trivial to execute and is out of the scope of this article.
Facebook partially mitigates the problem of modifications made to posts after their publication by displaying an indication that a post was edited. Other OSNs, such as Twitter or Instagram, do not allow published posts to be edited. Nevertheless, the major OSNs (Facebook, Twitter, and LinkedIn) allow publishing redirect links, and they support link preview updates. This allows changing the way a post is displayed without any indication that the target content of the URLs has been changed.
In this article, we present a novel type of OSN attack termed the [*chameleon* ]{}attack, where the content (or the way it is displayed) is modified over time to create social traction before executing the attack (see Section \[sec:chameleon\_attack\]). We discuss the OSN misuse cases stemming from this attack and their potential impacts in Section \[sec:misuse\]. We review the susceptibility of seven major OSN platforms to the [*chameleon* ]{}attack in Section \[sec:susceptibility\] and present the results of an intrusion into closed Facebook groups facilitated by it in Section \[sec:group\_infiltration\_experiments\]. A set of suggested countermeasures that should be applied to reduce the impact of similar attacks in the future is suggested in Section \[sec:mitigation\].
The contribution of this study is three-fold:
- We present a new OSN attack termed the [*chameleon* ]{}attack, including an end-to-end demonstration on major OSNs (Facebook, Twitter, and LinkedIn).
- We present a social experiment on Facebook showing that chameleons facilitate infiltration into closed communities.
- We discuss multiple misuse cases and mitigation from which we derive a recommended course of action to OSNs.
Background on redirection and link preview
==========================================
#### Redirection
It is a common practice on the web that helps Internet users to find relocated resources, use multiple aliases for the same resource, and shorten long and cumbersome URLs. Thus, the use of URL shortening services is very common within OSNs.
There are two types of redirect links: server, and client redirects. In the case of a server-side redirect, the server returns the HTTP status code 301 (redirect) with a new URL. Major OSNs follow server-side redirects up to the final destination in order to provide their users with a preview of the linked Web resource. In the case of a client-side redirect, the navigation process is carried out by a JavaScript command executed in the client’s browser. Since the OSNs do not render the Web pages they do not the follow client redirects up to the final destination.
#### Short links and brand management
There are many link redirection services across the Web that use 301 server redirects for brand management, URL shortening, click counts and various website access statistics. Some of these services that focus on brand management, such as *[rebrandly.com](rebrandly.com)*, allow their clients to change the target URL while maintaining the aliases. Some services, such as *[bitly.com](bitly.com)*, require a premium subscription to change the target URL.
The ability to change the target URL without changing the short alias is important when businesses restructure their websites or move them to a different web host. Yet, as will be discussed in Section \[sec:chameleon\_attack\], this feature may be exploited to facilitate the [*chameleon* ]{}attack.
#### DNS updates
DNS is used to resolve the IP address of a server given a domain name. The owner of the domain name may designate any target IP address for his/her domain and change it at will. The update process may take up to 24 hours to propagate. Rapid DNS update queries, known as Fast Flux, are used by adversaries to launch spam and phishing campaigns. Race conditions due to the propagation of DNS updates cause a domain name to be associated with multiple, constantly changing IP addresses at the same time.
#### Link previews
Generating and displaying link previews is an important OSN feature that streamlines the social interaction within the OSN. It allows the users to quickly get a first impression of a post or a profile without extra clicks. Based on the meta-tags of the target page, the link preview, usually includes a title, a thumbnail, and a short description of the resource targeted by the URL [@kopetzky1999visual].
When shortened URLs or other server-side redirects are used, the OSN follows the redirection path to generate a preview of the final destination. These previews are cached due to performance considerations. The major OSNs update the link previews upon request (see Section \[sec:weaknesses\] for details). In the case of client-redirect, some OSNs (e.g., Twitter) use the meta-tags of the first HTML page in the redirect chain. Others, (e.g., Facebook) follow the client redirect up to the final destination.
The Chameleon Attack {#sec:chameleon_attack}
====================
The [*chameleon* ]{}attack takes advantage of link previews and redirected links to modify the way that published content is displayed within the OSN without any indication for the modifications made. As part of this attack, the adversary circumvents the content editing restrictions of an
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: 'We present bilateral teleoperation system for task learning and robot motion generation. Our system includes a bilateral teleoperation platform and a deep learning software. The deep learning software refers to human demonstration using the bilateral teleoperation platform to collect visual images and robotic encoder values. It leverages the datasets of images and robotic encoder information to learn about the inter-modal correspondence between visual images and robot motion. In detail, the deep learning software uses a combination of Deep Convolutional Auto-Encoders (DCAE) over image regions, and Recurrent Neural Network with Long Short-Term Memory units (LSTM-RNN) over robot motor angles, to learn motion taught be human teleoperation. The learnt models are used to predict new motion trajectories for similar tasks. Experimental results show that our system has the adaptivity to generate motion for similar scooping tasks. Detailed analysis is performed based on failure cases of the experimental results. Some insights about the cans and cannots of the system are summarized.'
author:
- 'Hitoe Ochi, Weiwei Wan, Yajue Yang, Natsuki Yamanobe, Jia Pan, and Kensuke Harada [^1]'
bibliography:
- 'reference.bib'
title: Deep Learning Scooping Motion using Bilateral Teleoperations
---
Introduction
============
Common household tasks require robots to act intelligently and adaptively in various unstructured environment, which makes it difficult to model control policies with explicit objectives and reward functions. One popular solution [@argall2009survey][@yang2017repeatable] is to circumvent the difficulties by learning from demonstration (LfD). LfD allows robots to learn skills from successful demonstrations performed by manual teaching. In order to take advantage of LfD, we develop a system which enables human operators to demonstrate with ease and enables robots to learn dexterous manipulation skills with multi-modal sensed data. Fig.\[teaser\] shows the system. The hardware platform of the system is a bi-lateral tele-operation systems composed of two same robot manipulators. The software of the system is a deep neural network made of a Deep Convolutional Auto-Encoder (DCAE) and a Recurrent Neural Network with Long Short-Term Memory units (LSTM-RNN). The deep neural network leverages the datasets of images and robotic encoder information to learn about the inter-modal correspondence between visual images and robot motion, and the proposed system use the learnt model to generate new motion trajectories for similar tasks.
![The bilateral teleoperation system for task learning and robotic motion generation. The hardware platform of the system is a bi-lateral tele-operation systems composed of two same robot manipulators. The software of the system is a deep neural network made of a Deep Convolutional Auto-Encoder (DCAE) and a Recurrent Neural Network with Long Short-Term Memory units (LSTM-RNN). The deep learning models are trained by human demonstration, and used to generate new motion trajectories for similar tasks.[]{data-label="teaser"}](imgs/teaser.png){width=".47\textwidth"}
Using the system, we can conduct experiments of robot learning different basic behaviours using deep learning algorithms. Especially, we focus on a scooping task which is common in home kitchen. We demonstrate that our system has the adaptivity to predict motion for a broad range of scooping tasks. Meanwhile, we examine the ability of deep learning algorithms with target objects placed at different places and prepared in different conditions. We carry out detailed analysis on the results and analyzed the reasons that limited the ability of the proposed deep learning system. We reach to a conclusion that although LfD using deep learning is applicable to a wide range of objects, it still requires a large amount data to adapt to large varieties. Mixed learning and planning is suggested to be a better approach.
The paper is organized as follows. Section 2 reviews related work. Section 3 presents the entire LfD system including the demonstration method and the learning algorithm. Section 4 explains how the robot perform a task after learning. Section 5 describes and analyzes experiment setups and results. Section 6 draws conclusions and discusses possible methods to improve system performance.
Related Work
============
The learning method we used is DCAE and RNN. This section reviews their origins and state-of-the-art applications.
Auto-encoders were initially introduced by Rumelhart et al. [@rumelhart1985learning] to address the problem of unsupervised back propagation. The input data was used as the teacher data to minimize reconstruction errors [@olshausen1997sparse]. Auto-encoders were embedded into deep neural network as DCAE to explore deep features in [@hinton2006fast][@salakhutdinov2009semantic] [@bengio2007greedy][@torralba2008small], etc. DCAE helps to learn multiple levels of representation of high dimensional data.
RNN is the feed-backward version of conventional feed forward neural network. It allows the output of one neuron at time $t_i$ to be input of a neuron for time $t_{i+1}$. RNN may date back to the Hopfield network [@hopfield1982neural]. RNN is most suitable for learning and predicting sequential data. Some successful applications of RNN include handwritting recognition [@graves2009novel], speech recognition [@graves2013speech], visual tracking [@dequaire2017deep], etc. RNN has advantages over conventional mathematical models for sequential data like Hidden Markov Model (HMM) [@wan2007hybrid] in that it uses scalable historical characters and is applicable to sequences of varying time lengths.
A variation of RNN is Multiple Timescale RNN (MTRNN), which is the multiple timescale version of traditional RNN and was initially proposed by Yamashita and Tani [@yamashita2008emergence] to learn motion primitives and predict new actions by combining the learnt primitives. The MTRNN is composed of multiple Continuous Recurrent Neural Network (CTRNN) layers that allow to have different timescale activation speeds and thus enables scalability over time. Arie et al. [@arie2009creating] Jeong et al. [@jeong2012neuro] are some other studies that used MTRNN to generate robot motion.
RNN-based methods suffers from a vanishing gradient problem [@hochreiter2001gradient]. To overcome this problem, Hochereiter and Schmidhuber [@hochreiter1997long] developed the Long Short Term Memory (LSTM) network. The advantages of LSTM is it has an input gate, an output gate, and a forget gate which allow the cells to store and access information over long periods of time.
The recurrent neural network used by us in this paper is RNN with LSTM units. It is proved that RNN with LSTM units are effective and scalable in long-range sequence learning [@greff2017lstm][^2]. By introducing into each LSTM unit a memory cell which can maintain its state over time, LSTM network is able to overcome the vanishing gradient problem. LSTM is especially suitable for applications involving long-term dependencies [@karpathy2015visualizing].
Together with the DCAE, we build a system allowing predicting robot trajectories for diverse tasks using vision systems. The system uses bilateral teleoperation to collect data from human beings, like a general LfD system. It trains a DCAE as well as a LSTM-RNN model, and use the model to learn robot motions to perform similar tasks. We performed experiments by especially focusing on a scooping task that is common in home kitchen. Several previous studies like [@yang2017repeatable][@mayer2008system][@rahmatizadeh2017vision][@liu2017imitation] also studied learning to perform similar robotic tasks using deep learning models. Compared with them, we not only demonstrate the generalization of deep models in robotic task learning, but also carry out detailed analysis on the results and analyzed the reasons that limited the ability of the proposed deep learning system. Readers are encouraged to refer to the experiments and analysis section for details.
The system for LfD using deep learning
======================================
The bilateral teleoperation platform
------------------------------------
Our LfD system utilizes bilateral teleoperation to allow human operators to adaptively control the robot based on his control. Conventionally, teleoperation was done in master-slave mode by using a joystick [@rahmatizadeh2017vision], a haptic device [@abi2016visual], or a virtual environment [@liu2017imitation] as the master device. Unlike the conventional methods, we use a robot manipulator as the master. As Figure 2 shows, our system is composed of two identical robot systems comprising a Universal Robot 1 arm at the same joint configuration and a force-torque sensor attached to the arm’s end-effector. The human operator drags the master at its end-effector and the controller calculates 6 dimensional Cartesian velocity commands for robots to follow the human operator’s guidance. This dual-arm bilateral teleoperation system provides similar operation spaces for the master and slave, which makes it more convenient for the human operator to drag the master in a natural manner. In addition, we install a Microsoft Kinect 1 above the slave manipulator to capture depth and RGB images of the environment.
The bilateral teleoperation platform provides the human operator a virtual sense of the contact force to improve LfD [@hokayem2006bilateral]. While the human operator works on the master manipulator, the slave robot senses a contact force with a force-torque sensor installed at its wrist. A controller computes robot motions considering both the force exerted by human beings and the force feedback from the force sensor. Specifically, when the slave does not contact with the environment,
|
{
"pile_set_name": "ArXiv"
}
|
---
author:
- 'A. Gallenne'
- 'A. Mérand'
- 'P. Kervella'
- 'O. Chesneau'
- 'J. Breitfelder'
- 'W. Gieren'
bibliography:
- './bibliographie.bib'
date: 'Received July 11, 2013; accepted August 30, 2013'
subtitle: 'IV. T Monocerotis and X Sagittarii from mid-infrared interferometry with VLTI/MIDI[^1]'
title: Extended envelopes around Galactic Cepheids
---
[We study the close environment of nearby Cepheids using high spatial resolution observations in the mid-infrared with the VLTI/MIDI instrument, a two-beam interferometric recombiner.]{} [We obtained spectra and visibilities for the classical Cepheids X Sgr and T Mon. We fitted the MIDI measurements, supplemented by $B, V, J, H, K$ literature photometry, with the numerical transfer code `DUSTY` to determine the dust shell parameters. We used a typical dust composition for circumstellar environments.]{} [We detect an extended dusty environment in the spectra and visibilities for both stars, although T Mon might suffer from thermal background contamination. We attribute this to the presence of a circumstellar envelope (CSE) surrounding the Cepheids. This is optically thin for X Sgr ($\tau_\mathrm{0.55\mathrm{\mu m}} = 0.008$), while it appears to be thicker for T Mon ($\tau_\mathrm{0.55\mathrm{\mu m}} = 0.15$). They are located at about 15–20 stellar radii. Following our previous work, we derived a likely period-excess relation in the VISIR PAH1 filter, $ f_\mathrm{8.6\,\mu m}$\[%\]$ = 0.81(\pm0.04)P$\[day\]. We argue that the impact of CSEs on the mid-IR period–luminosity (P–L) relation cannot be negligible because they can bias the Cepheid brightness by up to about 30%. For the $K$-band P–L relation, the CSE contribution seems to be lower ($< 5$%), but the sample needs to be enlarged to firmly conclude that the impact of the CSEs is negligible in this band.]{}
Introduction
============
A significant fraction of classical Cepheids exhibits an infrared excess, that is probably caused by a circumstellar envelope (CSE). The discovery of the first CSE around the Cepheid $\ell$ Car made use of near- and mid-infrared interferometric observations [@Kervella_2006_03_0]. Similar detections were subsequently reported for other Cepheids [@Merand_2007_08_0; @Merand_2006_07_0; @Barmby_2011_11_0; @Gallenne_2011_11_0], leading to the hypothesis that maybe all Cepheids are surrounded by a CSE. These envelopes are interesting from several aspects. Firstly, they might be related to past or ongoing stellar mass loss and might be used to trace the Cepheid evolution history. Secondly, their presence might induce a bias to distance determinations made with Baade-Wesselink methods and bias the calibration of the IR period–luminosity (P–L) relation. Our previous works [@Gallenne_2011_11_0; @Merand_2007_08_0; @Merand_2006_07_0; @Kervella_2006_03_0] showed that these CSEs have an angular size of a few stellar radii and a flux contribution to the photosphere ranging from a few percent to several tens of percent. While in the near-IR the CSE flux emission might be negligible compared with the photospheric continuum, this is not the case in the mid- and far-IR, where the CSE emission dominates [@Gallenne_2011_11_0; @Kervella_2009_05_0].
Interestingly, a correlation starts to appear between the pulsation period and the CSE brightness in the near- and mid-IR bands: long-period Cepheids seem to show relatively brighter CSEs than short-period Cepheids, indicating that the mass-loss mechanism could be linked to stellar pulsation [@Gallenne_2011_11_0; @Merand_2007_08_0]. Cepheids with long periods have higher masses and larger radii, therefore if we assume that the CSE IR brightness is an indicator of the mass-loss rate, this would mean that heavier stars experience higher mass-loss rates. This behavior could be explained by the stronger velocity fields in longer-period Cepheids and shock waves at certain pulsation phases [@Nardetto_2008_10_0; @Nardetto_2006_07_0]. Studying this correlation between the pulsation period and the IR excess is vital for calibrating relations between the Cepheid’ fundamental parameters with respect to their pulsation periods. If CSEs substantially influence the observational estimation of these fundamental parameters (luminosity, mass, radius, etc.), this a correlation will lead to a biased calibration. It is therefore essential to continue studying and characterizing these CSEs and to increase the statistical sample to confirm their properties.
We present new spatially resolved VLTI/MIDI interferometric observations of the classical Cepheids (HD 161592, $P = 7.01$days) and (HD 44990, $P = 27.02$days). The paper is organized as follows. Observations and data reduction procedures are presented in Sect. \[section\_\_observation\]. The data modeling and results are reported in Sect. \[section\_\_cse\_modeling\]. In Sect. \[section\_\_period\_excess\_relation\] we address the possible relation between the pulsation period and the IR excess. We then discuss our results in Sect. \[section\_\_discussion\] and conclude in Sect. \[section\_\_conclusion\].
VLTI/MIDI observations {#section__observation}
======================
Observations
------------
The observations were carried out in 2008 and 2009 with the VLT Unit Telescopes and the MIDI instrument [@Leinert_2003__0]. MIDI combines the coherent light coming from two telescopes in the $N$ band ($\lambda = 8-13\,\mu$m) and provides the spectrum and spectrally dispersed fringes with two possible spectral resolutions ($R = \Delta \lambda / \lambda = 30, 230$). For the observations presented here, we used the prism that provides the lowest spectral resolution. During the observations, the secondary mirrors of the two Unit Telescopes (UT1-UT4) were chopped with a frequency of 2 Hz to properly sample the sky background. MIDI has two photometric calibration modes: HIGH\_SENS, in which the flux is measured separately after the interferometric observations, and SCI\_PHOT, in which the photometry is measured simultaneously with the interferences fringes. These reported observations were obtained in HIGH\_SENS mode because of a relatively low thermal IR brightness of our Cepheids.
To remove the instrumental and atmospheric signatures, calibrators of known intrinsic visibility were observed immediately before or after the Cepheid. They were chosen from the @Cohen_1999_04_0 catalog, and are almost unresolved at our projected baselines ($V > 95$%, except for HD 169916, for which $V = 87$%). The systematic uncertainty associated with their a priori angular diameter error bars is negligible compared with the typical precision of the MIDI visibilities (10–15%). The uniform-disk angular diameters for the calibrators as well as the corresponding IRAS 12$\mu$m flux and the spectral type are given in Table \[table\_\_calibrators\].
The log of the MIDI observations is given in Table \[table\_\_journal\]. Observations \#1, \#2, and \#5–\#10 were not used because of low interferometric or/and photometric flux, possibly due to a temporary burst of very bad seeing or thin cirrus clouds.
-------- ---------------------- ----------------- -------------------- ----------
HD $\theta_\mathrm{UD}$ $f_\mathrm{W3}$ $f_\mathrm{Cohen}$ Sp. Type
(mas) (Jy) (Jy)
49293 $1.91 \pm 0.02$ $4.3 \pm 0.1$ $4.7 \pm 0.1$ K0IIIa
48433 $2.07 \pm 0.03$ $6.5 \pm 0.1$ $5.5 \pm 0.1$ K0.5III
168592 $2.66 \pm 0.05$ $8.3 \pm 0.1$ $7.4 \pm 0.1$ K4-5III
169916 $4.24 \pm 0.05$ $25.9 \pm 0.4$ $21.1 \pm 0.1$ K1IIIb
-------- ---------------------- ----------------- -------------------- ----------
: Properties of our calibrator stars.
\[table\_\_calibrators\]
---- ----------- -------- ---------- ---------------- ----------- ------
\# MJD $\phi$
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: 'We present here a microscopic analysis of the cooperative light scattering on an atomic system consisting of $\Lambda$-type configured atoms with the spin-degenerate ground state. The results are compared with a similar system consisting of standard “two-level” atoms of the Dicke model. We discuss advantages of the considered system in context of its possible implications for light storage in a macroscopic ensemble of dense and ultracold atoms.'
address: |
${}^1$Department of Theoretical Physics, St-Petersburg State Polytechnic University, 195251, St.-Petersburg, Russia\
${}^2$Department of Physics, St-Petersburg State University, 198504, St-Petersburg, Russia
author:
- 'A.S. Sheremet${}^1$, A.D. Manukhova${}^2$, N.V. Larionov${}^1$, D.V. Kupriyanov${}^1$'
title: |
Cooperative light scattering on an atomic system with\
degenerate structure of the ground state
---
Introduction
============
A significant range of studies of ultracold atomic systems have focused on their complex quantum behavior in various interaction processes. Among these, special attention has been payed to the quantum interface between light and matter, and quantum memory in particular [@PSH; @Simon; @SpecialIssueJPhysB]. Most of the schemes for light storage in atomic ensembles are based on idea of the $\Lambda$-type conversion of a signal pulse into the long-lived spin coherence of the atomic ground state. The electromagnetically induced transparency (EIT) protocol in a warm atomic ensemble was successfully demonstrated in Ref. [@NGPSLW], and also in Ref. [@CDLK], where a single photon entangled state was stored in two ensembles of cold atoms with an efficiency of 17%. Recent experiments on conversion of a spin polariton mode into a cavity mode with efficiency close to 90% [@STTV] and on the narrow-bandwidth biphoton preparation in a double $\Lambda$-system under EIT conditions [@DKBYH] show promising potential for developing a quantum interface between light and atomic systems. However, further improvement of atomic memory efficiencies is a challenging and not straightforward experimental task. In the case of warm atomic vapors, any increase of the sample optical depth meets a serious barrier for the EIT effect because of the rather complicated and mainly negative rule of atomic motion and Doppler broadening, which manifest in destructive interference among the different hyperfine transitions of alkali-metal atoms [@MSLOFSBKLG]. In the case of ultracold and dilute atomic gas, which can be prepared in a magneto-optical trap (MOT), for some experimental designs optical depths around hundreds are feasible [@FGCK], but there are a certain challenges in accumulating so many atoms and making such a system controllable. One possible solution requires special arrangements for effective light storage in MOT in a diffusion regime; see Ref. [@GSOH].
Recent progress in experimental studies of light localization phenomenon in the dense and strongly disordered atomic systems [@Kaiser; @BHSK] encourages us to think that the storage protocols for light could be organized more effectively if atoms interacted with the field cooperatively in the dense configuration. If an atomic cloud contains more than one atom in the volume scaled by the radiation wavelength, the essential optical thickness can be attained for a smaller number of atoms than it is typically needed in dilute configuration. In the present paper we address the problem of light scattering by such an atomic system, which has intrinsically cooperative behavior. Although the problem of cooperative or dependent light scattering and super-radiance phenomenon have been well established in atomic physics and quantum optics for decades (see Refs. [@BEMST; @Akkermns]), microscopic analysis for the atoms with degenerate ground states is still quite poorly performed in the literature [@Grubellier]. The microscopic calculations reported so far have been done mostly for “two-level” atoms and were basically motivated by the problem of mesoscopic description of the light transport through disordered media and by an Anderson-type localization, where transition from weak to strong disorder plays a crucial role; see Refs. [@RMO; @GeroAkkermns; @SKKH].
In this paper we develop a microscopic theory of the cooperative light scattering from an atomic system consisted of $\Lambda$-type configured atoms with the spin-degenerate ground state. The results are compared with a similar system of “two-level” atoms of the Dicke model. We discuss advantages of the considered system in the context of its possible implications for the problem of light storage in a macroscopic ensemble of dense and ultracold atoms.
Theoretical framework
=====================
Transition amplitude and the scattering cross section
-----------------------------------------------------
The quantum-posed description of the photon scattering problem is based on the formalism of $T$ matrix, which is defined by $$\hat{T}(E)=\hat{V}+\hat{V}\frac{1}{E-\hat{H}}\hat{V},%
\label{2.1}%$$ where $\hat{H}$ is the total Hamiltonian consisting of the nonperturbed part $\hat{H}_0$ and an interaction term $\hat{V}$ such that $\hat{H}=\hat{H}_0+\hat{V}$. The energy argument $E$ is an arbitrary complex parameter in Eq.(\[2.1\]). Then the scattering process, evolving from initial state $|i\rangle$ to the final state $|f\rangle$, is expressed by the following relation between the differential cross section and the transition amplitude, given by the relevant $T$-matrix element considered as a function of the initial energy $E_i$: $$d\sigma_{i\to f}=\frac{{\cal V}^2}{\hbar^2
c^4}\frac{\omega'^2}{(2\pi)^2}%
\left|T_{g'\mathbf{e}'\mathbf{k}',g\,\mathbf{e\,k}}(E_i+i0)\right|^2d\Omega%
\label{2.2}%$$ Here the initial state $|i\rangle$ is specified by the incoming photon’s wave vector $\mathbf{k}$, frequency $\omega\equiv\omega_k=c\,k$, and polarization vector $\mathbf{e}$, and the atomic system populates a particular ground state $|g\rangle$. The final state $|f\rangle$ is specified by a similar set of the quantum numbers, which are additionally upscribed by the prime sign, and the solid angle $\Omega$ is directed along the wavevector of the outgoing photon $\mathbf{k}'$. The presence of quantization volume ${\cal V}$ in this expression is caused by the second quantized structure of the interaction operators; see below. The scattering process conserves the energy of input and output channels, such that $E_i=E_f$.
Our description of interaction process of the electromagnetic field with an atomic system is performed in the dipole approximation. This states that the original Hamiltonian, introduced in the Coulomb gauge and valid for any neutral charge system, has been unitarily transformed to the dipole-type interaction with the assumption that atomic size is much smaller than a typical wavelength of the field modes actually contributing to the interaction dynamics. Such a long-wavelength dipole approximation see Ref. [@ChTnDRGr] for derivation details leads to the following interaction Hamiltonian for an atomic ensemble consisting of $N$ dipole-type scatterers interacting with the quantized electromagnetic field: $$\begin{aligned}
\hat{V}&=&-\sum_{a=1}^{N}%
\hat{\mathbf{d}}^{(a)}\hat{\mathbf{E}}(\mathbf{r}_a)+\hat{H}_{\mathrm{self}},%
\nonumber\\%
\hat{H}_{\mathrm{self}}&=&\sum_{a=1}^{N}\frac{2\pi}{{\cal V}}\sum_{s}\left(\mathbf{e}_s\hat{\mathbf{d}}^{(a)}\right)^2%
\label{2.3}%\end{aligned}$$ The first and most important term is normally interpreted as interaction of an $a$th atomic dipole $\mathbf{d}^{(a)}$ with electric field $\hat{\mathbf{E}}(\mathbf{r})$ at the point of dipole location. However, strictly defined in the dipole gauge, the latter quantity performs the microscopic displacement field, which can be expressed by a standard expansion in the basis of plane waves $s\equiv{\mathbf{k},\alpha}$ (where $\alpha=1,2$ numerates two orthogonal transverse polarization vectors $\mathbf{e}_s\equiv\mathbf{e}_{\mathbf{k}\alpha}$ for each $\mathbf{k}$) $$\begin{aligned}
\lefteqn{\hat{\mathbf{E}}(\mathbf{r})\equiv \hat{\mathbf{E}}^{(+)}(\mathbf{r})%
+\hat{\mathbf{E}}^{(-)}(\mathbf{r})}%
\nonumber\\%
&&=\sum_{s}\left(\frac{2\pi\hbar\omega_s}{{\cal V}}\right)^{1/2}%
\left[i\mathbf{e}_s a_s\mathrm{e}^{i\mathbf{k}_s\mathbf{r}}%
-i\mathbf{e}_s a_s^{\dagger}\mathrm{e}^{-i\mathbf{k}_s\mathbf{r}}\right]%
\nonumber\\%
&&=\hat{\mathbf{E}}_{\bot}(\mathbf{r})+\sum_{b=1}^{N}\frac{4\pi}{{\cal V}}%
\sum_{s}\mathbf{e}_s(\mathbf{e}_s\hat{\mathbf{d}}^{(b)})%
\mathrm{e}^{i\
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: 'In this paper, we recall our renormalized quantum Q-system associated with representations of the Lie algebra $A_r$, and show that it can be viewed as a quotient of the quantum current algebra $U_q(\n[u,u^{-1}])\subset U_q(\widehat{\sl}_2)$ in the Drinfeld presentation. Moreover, we find the interpretation of the conserved quantities in terms of Cartan currents at level 0, and the rest of the current algebra, in a non-standard polarization in terms of generators in the quantum cluster algebra.'
address:
- 'PDF: Department of Mathematics, University of Illinois MC-382, Urbana, IL 61821, U.S.A. e-mail: philippe@illinois.edu'
- 'RK: Department of Mathematics, University of Illinois MC-382, Urbana, IL 61821, U.S.A. e-mail: rinat@illinois.edu'
author:
- Philippe Di Francesco
- Rinat Kedem
bibliography:
- 'refs.bib'
title: 'Quantum Q systems: From cluster algebras to quantum current algebras'
---
Introduction
============
An extended quantum Q system
============================
Proofs {#proofsec}
======
The quantum affine algebra
==========================
Discussion/Conclusion
=====================
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: |
From formal and practical analysis, we identify new challenges that self-adaptive systems pose to the process of quality assurance. When tackling these, the effort spent on various tasks in the process of software engineering is naturally re-distributed. We claim that all steps related to testing need to become self-adaptive to match the capabilities of the self-adaptive system-under-test. Otherwise, the adaptive system’s behavior might elude traditional variants of quality assurance. We thus propose the paradigm of scenario coevolution, which describes a pool of test cases and other constraints on system behavior that evolves in parallel to the (in part autonomous) development of behavior in the system-under-test. Scenario coevolution offers a simple structure for the organization of adaptive testing that allows for both human-controlled and autonomous intervention, supporting software engineering for adaptive systems on a procedural as well as technical level.
-adaptive system, software engineering, quality assurance, software evolution
author:
- Thomas Gabor$^1$
- Marie Kiermeier$^1$
- Andreas Sedlmeier$^1$
- Bernhard Kempter$^2$
- Cornel Klein$^2$
- Horst Sauer$^2$
- Reiner Schmid$^2$
- Jan Wieghardt$^2$
bibliography:
- 'references.bib'
title: |
Adapting Quality Assurance\
to Adaptive Systems:\
The Scenario Coevolution Paradigm
---
at (current page.south) ;
Introduction
============
Until recently, the discipline of software engineering has mainly tackled the process through which humans develop software systems. In the last few years, current break-throughs in the fields of artificial intelligence and machine learning have enabled new possibilities that have previously been considered infeasible or just too complex to tap into with “manual” coding: Complex image recognition, natural language processing, or decision making as it is used in complex games are prime examples. The resulting applications are pushing towards a broad audience of users. However, as of now, they are mostly focused on non-critical areas of use, at least when implemented without further human supervision. Software artifacts generated via machine learning are hard to analyze, causing a lack of trustworthiness for many important application areas.
We claim that in order to reinstate levels of trustworthiness comparable to well-known classical approaches, we need not essentially reproduce the principles of classical software test but need to develop a new approach towards software testing. We suggest to develop a system and its test suite in a competitive setting where each sub-system tries to outwit the other. We call this approach *scenario coevolution* and attempt to show the necessity of such an approach. We hope that trust in that dynamic (or similar ones) can help to build a new process for quality assurance, even for hardly predictable systems.
Following a top-down approach to the issue, we start in Section \[sec:formal\] by introducing a formal framework for the description of systems. We augment it to also include the process of software and system development. Section \[sec:related-work\] provides a short overview on related work. From literature review and practical experience, we introduce four core concepts for the engineering of adaptive systems in Section \[sec:concepts\]. In order to integrate these with our formal framework, Section \[sec:scenarios\] contains an introduction of our notion of scenarios and their application to an incremental software testing process. In Section \[sec:applications\] we discuss which effect scenario coevolution has on a selection of practical software engineering tasks and how it helps implement the core concepts. Finally, Section \[sec:conclusion\] provides a short conclusion.
Formal Framework {#sec:formal}
================
In this section we introduce a formal framework as a basis for our analysis. We first build upon the framework described in [@holzl2011towards] to define adaptive systems and then proceed to reason about the influence of their inherent structure on software architecture.
Describing Adaptive Systems
---------------------------
We roughly adopt the formal definitions of our vocabulary related to the description of systems from [@holzl2011towards]: We describe a system as an arbitrary relation over a set of variables.
\[def:system\] Let $I$ be a (finite or infinite) set, and let $\mathcal{V} = (V_i)_{i \in I}$ be a family of sets. A *system* of type $\mathcal{V}$ is a relation $S$ of type $\mathcal{V}$.
Given a System $S$, an element $s \in S$ is called the state of the system. For practical purposes, we usually want to discern various parts of a system’s state space. For this reason, parts of the system relation of type $\mathcal{V}$ given by an index set $J \subseteq I$, i.e., $(V_j)_{j \in J}$, may be considered *inputs* and other parts given by a different index set may be considered *outputs* [@holzl2011towards]. Formally, this makes no difference to the system. Semantically, we usually compute the output parts of the system using the input parts.
We introduce two more designated sub-spaces of the system relation: *situation* and *behavior*. These notions correspond roughly to the intended meaning of inputs and outputs mentioned before. The situation is the part of the system state space that fully encapsulates all information the system has about its state. This may include parts that the system does have full control over (which we would consider counter-intuitive when using the notion of “input”). The behavior encapsulates the parts of the system that can only be computed by applying the system relation. Likewise, this does *not* imply that the system has full control over the values. Furthermore, a system may have an *internal state*, which is parts of the state space that are neither included in the situation nor in the behavior. When we are not interested in the internal space, we can regard a system as a mapping from situations to behavior, written $S = X \stackrel{Z}{\leadsto} Y$ for situations $X$ and behaviors $Y$, where $Z$ is the internal state of the system $S$. Using these notions, we can more aptly define some properties on systems. Further following the line of thought presented in [@holzl2011towards], we want to build systems out of other systems. At the core of software engineering, there is the principle of re-use of components, which we want to mirror in our formalism.
Let $S_1$ and $S_2$ be systems of types $\mathcal{V}_1 = (V_{1,i})_{i \in I_1}$ and $\mathcal{V}_2 = (V_{2,i})_{i \in I_2}$, respectively. Let $\mathcal{R}(\mathcal{V})$ be the domain of all relations over $\mathcal{V}$. A *combination operator* $\otimes$ is a function such that $S_1 \otimes S_2 \in \mathcal{R}(\mathcal{V})$ for some family of sets $\mathcal{V}$ with $V_{1,1}, ..., V_{1,m}, V_{2,1}, ..., V_{2,n} \in \mathcal{V}$.[^1] The application of a combination operator is called *composition*. The arguments to a combination operator are called *components*.
Composition is not only important to model software architecture within our formalism, but it also defines the formal framework for interaction: Two systems interact when they are combined using a combination operator $\otimes$ that ensures that the behavior of (at least) one system is recognized within the situation of (at least) another system.
Let $S = S_1 \otimes S_2$ be a composition of type $\mathcal{V}$ of systems $S_1$ and $S_2$ of type $\mathcal{V}_1$ and $\mathcal{V}_2$, respectively, using a combination operator $\otimes$. If there exist a $V_1 \in \mathcal{V}_1$ and a $V_2 \in \mathcal{V}_2$ and a relation $R \in V_1 \times V_2$ so that for all states $s \in S$, $(proj(s, V_1), proj(s, V_2)) \in R$, then the components $S_1$ and $S_2$ interact with respect to $R$.
We can model an open system $S$ as a combination $S = C \otimes E$ of a core system $C$ and its environment $E$, both being modeled as systems again.
Hiding some of the complexity described in [@holzl2011towards], we assume we have a logic $\mathfrak{L}$ in which we can express a system goal $\gamma$. We can always decide if $\gamma$ holds for a given system, in which case we write $S \models \gamma$ for $\gamma(S) = \top$. Based on [@holzl2011towards], we can use this concept to define an adaptation domain:
\[def:adaptation-domain\] Let $S$ be a system. Let $\mathcal{E}$ be a set of environments that can be combined with $S$ using a combination operator $\otimes$. Let $\Gamma$ be a set of goals. An *adaptation domain* $\mathcal{A}$ is a set $\mathcal{A} \subseteq \mathcal{E} \times \Gamma$. $S$ can adapt to $\
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: |
FPGAs have found increasing adoption in data center applications since a new generation of high-level tools have become available which noticeably reduce development time for FPGA accelerators and still provide high-quality results. There is, however, no high-level benchmark suite available, which specifically enables a comparison of FPGA architectures, programming tools, and libraries for HPC applications.
To fill this gap, we have developed an OpenCL-based open-source implementation of the HPCC benchmark suite for Xilinx and Intel FPGAs. This benchmark can serve to analyze the current capabilities of FPGA devices, cards, and development tool flows, track progress over time, and point out specific difficulties for FPGA acceleration in the HPC domain. Additionally, the benchmark documents proven performance optimization patterns. We will continue optimizing and porting the benchmark for new generations of FPGAs and design tools and encourage active participation to create a valuable tool for the community.
author:
-
bibliography:
- 'bibliography/meyer20\_sc.bib'
- 'bibliography/IEEEabrv.bib'
title: Evaluating FPGA Accelerator Performance with a Parameterized OpenCL Adaptation of the HPCChallenge Benchmark Suite
---
FPGA, OpenCL, High Level Sythesis, HPC benchmarking
Introduction
============
In , benchmarks are an important tool for performance comparison across systems. They are designed to stress important system properties or generate workloads that are similar to relevant applications for the user. Especially in acquisition planning they can be used to define the desired performance of the acquired system before it is built. Since it is a challenging task to select a set of benchmarks to cover all relevant device properties, benchmark suites can help by providing a pre-defined mix of applications and inputs, for example SPEC CPU [@SPEC-CPU] and [@HPCCIntroduction].
There is an ongoing trend towards heterogeneity in , complementing by accelerators, as indicated by the Top 500 list [@top500]. From the top 10 systems in the list, seven are equipped with different types of accelerators. Nevertheless, to get the best matching accelerator for a new system, a tool is needed to measure and compare the performance across accelerators. For well-established accelerator architectures like , there are already standardized benchmarks like SPEC ACCEL [@SPECACCEL]. For , that are just emerging as accelerator architecture for data centers and HPC, existing benchmarks do not focus on and miss to measure highly relevant device properties.
Similar to the compiler for applications, the framework consisting of and takes a very important role to achieve performance on an . The framework translates the accelerator code (denoted as *kernel*), most commonly from , to intermediate languages, organizes the communication with the underlying , performs optimizations and synthesizes the code to create executable configurations (bitstreams). Hence, the framework has a big impact on the used resources and the maximum kernel frequency, which might vary depending on the kernel design. An benchmark suite for should capture this impact and, for comparisons, must not be limited to a single framework.
One of the core aspects of is communication. Some cards offer a new approach for scaling with their support for direct communication to other cards without involving the host CPU. Such technology is already used in first applications [@MLNetwork; @Sano-Multi-FPGA-Stencil] and research has started to explore the best abstractions and programming models for inter-FPGA communication [@SMI; @FPGAEthernet]. Thus, communication between FPGAs out of an framework is another essential characteristic that a benchmark suite targeting should consider.
In this paper, we propose *HPCC FPGA*, an benchmark suite for using the applications of the benchmark suite. The motivation for choosing HPCC is that it is well-established for CPUs and covers a small set of applications that evaluate important memory access and computing patterns that are frequently used in HPC applications. Further, the benchmark also characterizes the HPC system’s network bandwidth allowing to extrapolate to the performance of parallel applications.
Specifically, we make the following contributions in this paper:
1. We provide FPGA-adapted kernel implementations along with corresponding host code for setup and measurements for all benchmark applications.
2. We provide configuration options for the kernels that allow adjustments to resources and architecture of the target and board without the need to change the code manually.
3. We evaluate the execution of these benchmarks on different FPGA families and boards with Intel and Xilinx FPGAs and show the benchmarks can capture relevant device properties.
4. We make all benchmarks and the build system available as open-source on GitHub to encourage community contributions.
The remainder of this paper is organized as follows: In Section \[sec:related-work\], we give an overview of existing benchmark suites. In Section \[sec:hpcc-benchmark\], we introduce the benchmarks in in more detail and briefly discuss the contained benchmarks and the configuration options provided for the base runs. In Section \[sec:evaluation\] we build the benchmarks for different architectures and evaluate the results to show the potential of the proposed configurable base runs. In Section \[sec:discussion\], we evaluate the global memory system of the boards in more detail and give insights into experienced problems and the potential of the benchmarks to describe the performance of boards and the associated frameworks. Finally, in Section \[sec:conclusion\], we draw conclusions and outline future work.
Related Work {#sec:related-work}
============
There already exist several benchmark suites for and their frameworks. Most benchmark suites like Rodinia [@Rodinia], OpenDwarfs [@OpenDwarfs-first] or SHOC [@SHOC] are originally designed with GPUs in mind. Although both GPU and can be programmed using , the design of the compute kernels has to be changed and optimized specifically for to achieve good performance. In the case of Rodinia this was done [@RodiniaFPGA] for a subset of the benchmark suite with a focus on different optimization patterns for the Intel FPGA (then Altera) SDK for OpenCL. In contrast, to port OpenDwarfs to FPGAs, Feng et al. [@OpenDwarfs-first] employed a research OpenCL synthesis tool that instantiates GPU-like architectures on FPGAs. With Rosetta [@Rosetta], there also exists a benchmark suite that was designed targeting using the Xilinx HLS tools from the start. It focuses on typical FPGA streaming applications from the video processing and machine learning domains. The CHO [@CHO] benchmark targets more fundamental FPGA functionality and includes kernels from media processing and cryptography and the low-level generation of floating-point arithmetic through OpenCL, using the Altera SDK for OpenCL.
The mentioned benchmarks often lack possibilities to adjust the benchmarks to the target architecture easily. Modifications have to be done manually in the kernel code, sometimes many different kernel variants are proposed or the kernels are not optimized at all, making it difficult to compare results for different . A benchmark suite that takes a different approach is Spector [@Spector]. It makes use of several optimization parameters for every benchmark, which allows modification and optimization of the kernels for a architecture. The kernel code does not have to be manually changed, and optimization options are restricted by the defined parameters. Nevertheless, the focus is more on the research of the design space than on performance characterization.
To our best knowledge, there exists no benchmark suite for with a focus on characteristics at the point of writing. All of the mentioned benchmark suites lack a way to measure the inter- communication capability of recent high-end . In some of the benchmarks, the investigated input sizes are small enough to fit into local memory resources of a single . Since actual applications are highly parallel and require effective communication, an focused benchmark must also evaluate the characteristics of the communication network.
HPC Challenge Benchmarks for FPGA {#sec:hpcc-benchmark}
=================================
Benchmark Execution and Evaluation {#sec:evaluation}
==================================
Further Findings and Investigations {#sec:discussion}
===================================
Conclusion {#sec:conclusion}
==========
In this paper, we proposed *HPCC FPGA*, a novel benchmark suite for . Therefore, we provide configurable base implementations and host codes for all benchmarks of the well-established benchmark suite. We showed that the configuration options allow the generation of efficient benchmark kernels for Xilinx and Intel using the same source code without manual modification. We executed the benchmarks on up to three with four different memory setups and compared the results with simple performance models. Most benchmarks showed a high-performance efficiency when compared to the models. Nevertheless, the evaluation showed that the base implementations are often unable to utilize the available resources on an board fully. Hence, it is important to discuss the base implementations and configuration options with the community to create a valuable and widely accepted performance characterization tool for . We made the code open-source and publicly available to simplify and encourage contributions to future versions of the benchmark suite.
Acknowledgements {#acknowledgements .unnumbered}
================
The authors gratefully acknowledge the support of this project by computing time provided by the Paderborn Center for Parallel Computing (PC2). We also thank Xilinx for the donation of an Alveo U280 card, Intel for providing a PAC D5005 loaner board and access to the reference design BSP with SVM support, and the Systems Group at ETH Zurich as well as the Xilinx Adaptive Compute Clusters (XACC) program for access to their Xilinx FPGA evaluation system.
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: |
This paper is dedicated to the study of the interaction between dynamical systems and percolation models, with views towards the study of viral infections whose virus mutate with time. Recall that $r$-bootstrap percolation describes a deterministic process where vertices of a graph are infected once $r$ neighbors of it are infected. We generalize this by introducing [*$F(t)$-bootstrap percolation*]{}, a time-dependent process where the number of neighbouring vertices which need to be infected for a disease to be transmitted is determined by a percolation function $F(t)$ at each time $t$. After studying some of the basic properties of the model, we consider smallest percolating sets and construct a polynomial-timed algorithm to find one smallest minimal percolating set on finite trees for certain $F(t)$-bootstrap percolation models.\
author:
- 'Yuyuan Luo$^{a}$ and Laura P. Schaposnik$^{b,c}$'
bibliography:
- 'Schaposnik\_Percolation.bib'
title: Minimal percolating sets for mutating infectious diseases
---
Introduction
============
The study infectious diseases though mathematical models dates back to 1766, where Bernoulli developed a model to examine the mortality due to smallpox in England [@modeling]. Moreover, the germ theory that describes the spreading of infectious diseases was first established in 1840 by Henle and was further developed in the late 19th and early 20th centuries. This laid the groundwork for mathematical models as it explained the way that infectious diseases spread, which led to the rise of compartmental models. These models divide populations into compartments, where individuals in each compartment have the same characteristics; Ross first established one such model in 1911 in [@ross] to study malaria and later on, basic compartmental models to study infectious diseases were established in a sequence of three papers by Kermack and McKendrick [@kermack1927contribution] (see also [@epidemiology] and references therein).
In these notes we are interested in the interaction between dynamical systems and percolation models, with views towards the study of infections which mutate with time. The use of stochastic models to study infectious diseases dates back to 1978 in work of J.A.J. Metz [@epidemiology]. There are many ways to mathematically model infections, including statistical-based models such as regression models (e.g. [@imai2015time]), cumulative sum charts (e.g. [@chowell2018spatial]), hidden Markov models (e.g. [@watkins2009disease]), and spatial models (e.g. [@chowell2018spatial]), as well as mechanistic state-space models such as continuum models with differential equations (e.g. [@greenhalgh2015disease]), stochastic models (e.g. [@pipatsart2017stochastic]), complex network models (e.g. [@ahmad2018analyzing]), and agent-based simulations (e.g. [@hunter2019correction] – see also [@modeling] and references therein).
Difficulties when modeling infections include incorporating the dynamics of behavior in models, as it may be difficult to access the extent to which behaviors should be modeled explicitly, quantify changes in reporting behavior, as well as identifying the role of movement and travel [@challenges]. When using data from multiple sources, difficulties may arise when determining how the evidence should be weighted and when handling dependence between datasets [@challenges2].
In what follows we shall introduce a novel type of dynamical percolation which we call [*$F(t)$-bootstrap percolation*]{}, though a generalization of classical bootstrap percolation. This approach allows one to model mutating infections, and thus we dedicate this paper to the study some of its main features. After recalling classical $r$-bootstrap percolation in Section \[intro\], we introduce a percolating function $F(t)$ through which we introduce a dynamical aspect the percolating model, as described in Definition \[fperco\].
[**Definition.**]{} Given a function $F(t): \mathbb{N}\rightarrow \mathbb{N}$, we define an [*$F(t)$-bootstrap percolation model*]{} on a graph $G$ with vertices $V$ and initially infected set $A_0$ as the process which at time $t+1$ has infected set given by $$\begin{aligned}
A_{t+1} = A_{t} \cup \{v \in V : |N(v) \cap A_t| \geq F(t)\}, \end{aligned}$$ where $N(v)$ denotes the set of neighbouring vertices to $v$, and we let $A_\infty$ be the final set of infected vertices once the percolation process has finished.
In Section \[time\] we study some basic properties of this model, describe certain (recurrent) functions which ensure the model percolates, and study the critical probability $p_c$. Since our motivation comes partially from the study of effective vaccination programs which would allow to contain an epidemic, we are interested both in the percolating time of the model, as well as in minimal percolating sets. We study the former in Section \[time2\], where by considering equivalent functions to $F(t)$, we obtained bounds on the percolating time in Proposition \[propo8\].
Finally, in Section \[minimal\] and Section \[minimal2\] we introduce and study smallest minimal percolating sets for $F(t)$-bootstrap percolation on (non-regular) trees. This leads to one of our main results in Theorem \[teo1\], where we describe an algorithm for finding the smallest minimal percolating sets. Lastly, we conclude the paper with a comparison in Section \[final\] of our model and algorithm to the model and algorithm considered in [@percset] for clasical bootstrap percolation, and analyse the effect of taking different functions within our dynamical percolation.
Background: bootstrap percolation and SIR models {#intro}
================================================
Bootstrap percolation was introduced in 1979 in the context of solid state physics in order to analyze diluted magnetic systems in which strong competition exists between exchange and crystal-field interactions [@density]. It has seen applications in the studies of fluid flow in porous areas, the orientational ordering process of magnetic alloys, as well as the failure of units in a structured collection of computer memory [@applications].
Bootstrap percolation has long been studied mathematically on finite and infinite rooted trees including Galton-Watson trees (e.g. see [@MR3164766]). It better simulates the effects of individual behavior and the spatial aspects of epidemic spreading, and better accounts for the effects of mixing patterns of individuals. Hence, communicative diseases in which these factors have significant effects are better understood when analyzed with cellular automata models such as bootstrap percolation [@automata], which is defined as follows.
For $n\in \mathbb{Z}^+$, we define an [*$n$-bootstrap percolation model*]{} on a graph $G$ with vertices $V$ and initially infected set $A_0$ as the process in which at time $t+1$ has infected set given by $$\begin{aligned}
A_{t+1} = A_{t} \cup \{v \in V : |N(v) \cap A_t| \geq n\}. \end{aligned}$$ Here, as before, we denoted by $N(v)$ the set of neighbouring vertices to $v$.
In contrast, a [*SIR Model*]{} relates at each time $t$ the number of susceptible individuals $S(t)$ with the number of infected individuals $I(t)$ and the number of recovered individuals $R(t)$, by a system of differential equations – an example of a SIR model used to simulate the spread of the dengue fever disease appears in [@dengue]. The SIR models are very useful for simulating infectious diseases; however, compared to bootstrap percolation, SIR models do not account for individual behaviors and characteristics. In these models, a fixed parameter $\beta$ denotes the average number of transmissions from an infected node in a time period.
In what follows we shall present a dynamical generalization of the above model, for which it will be useful to have an example to establish the comparisons.
![Depiction of $2$-bootstrap percolation, where shaded vertices indicated infected nodes. []{data-label="first"}](Fig1.png)
Consider the (irregular) tree with three infected nodes at time $t=0$, given by $A_0=\{2,4,5\}$ as shown in Figure \[first\]. Then, through $2$-bootstrap percolation at time $t=1$, node $3$ becomes infected because its neighbors $4$ and $5$ are infected at time $t=0$. At time $t=2$, node $1$ becomes infected since its neighbors $2$ and $3$ are infected at time $t=1$. Finally, note that nodes $6,7,8$ cannot become infected because they each have only $1$ neighbor, yet two or more infected neighbors are required to become infected.
Time-dependent Percolation {#time}
===========================
The motivation of time-dependent percolation models appears since the rate of spread of diseases may change over time. In the SIR models mentioned before, since $\beta$ is the average number of transmissions from an infected node in a time period, $1/\beta$ is the time it takes to infect a node. If we “divide the work" among several neighbors, then $1/\beta$ is also the number of infected neighbors needed to infect the current node. Consider now an infection which would evolve with time.
|
{
"pile_set_name": "ArXiv"
}
|
---
author:
- 'Daisuke Kadoh,'
- Katsumasa Nakayama
bibliography:
- 'Refs.bib'
title: Direct computational approach to lattice supersymmetric quantum mechanics
---
We would like to thank Yoshinobu Kuramashi, Yoshifumi Nakamura, Shinji Takeda, Yuya Shimizu, Yusuke Yoshimura, Hikaru Kawauchi, and Ryo Sakai for valuable comments on TNR formulations which are closely related with this study. D.K also thank Naoya Ukita for encouraging our study. This work is supported by JSPS KAKENHI Grant Numbers JP16K05328 and the MEXT-Supported Program for the Strategic Research Foundation at Private Universities Topological Science (Grant No. S1511006).
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: 'Haptic devices have been employed to immerse users in VR environments. In particular, hand and finger haptic devices have been deeply developed. However, this type of devices occlude the hand detection by some tracking systems, or in other tracking systems, it is uncomfortable for the users to wear two hand devices (haptic and tracking device). We introduce RecyGlide, which is a novel wearable forearm multimodal display at the forearm. The RecyGlide is composed of inverted five-bar linkages and vibration motors. The device provides multimodal tactile feedback such as slippage, a force vector, pressure, and vibration. We tested the discrimination ability of monomodal and multimodal stimuli patterns in the forearm, and confirmed that the multimodal stimuli patterns are more recognizable. This haptic device was used in VR applications, and we proved that it enhances VR experience and makes it more interactive.'
author:
- Juan Heredia
- Jonathan Tirado
- Vladislav Panov
- Miguel Altamirano Cabrera
- 'Kamal Youcef-Toumi'
- Dzmitry Tsetserukou
bibliography:
- 'sample-base.bib'
title:
- 'Recyglide : A Wearable Multi-modal Stimuli Haptic Display aims to Improve User VR Immersion'
- ' RecyGlide : A Forearm-worn Multi-modal Haptic Display aimed to Improve User VR Immersion'
---
<ccs2012> <concept> <concept\_id>10003120.10003121.10003125.10011752</concept\_id> <concept\_desc>Human-centered computing Haptic devices</concept\_desc> <concept\_significance>500</concept\_significance> </concept> </ccs2012>
{width="\textwidth"}
\[fig:teaser\]
Introduction
============
Recently, several VR applications have been proposed in many fields: medicine, design, marketing, etc. , and to improve user immersion new methods or instruments are need. Haptics provides a solution, and enhances user experience using stimuli [@Han:2018:HAM:3281505.3281507]. Most of the haptics devices are located in the palm or fingers. However, in some cases the haptic device position is a problem because VR Hand Tracking Systems need a free hand (Leapmotion) or a hand instrument (HTC) to recognize the position. Therefore, we propose a novel multi-modal haptic display located in the forearm.
Various haptic devices have been developed in the forearm with mono-modal stimulus [@Dobbelstein:2018:MSM:3267242.3267249; @Moriyama:2018:DWH:3267782.3267795]. However, they have a persistent problem: users have more difficulty perceiving a stimulus in the forearm. The forearm is a not advantageous zone since it does not have as many nerves as the palm or fingertips have. Consequently, our device produces multi stimuli for improving user perceptions. Furthermore, multimodal stimuli experiments have been employed on the user’s hands, where the results show improvements in patterns recognition [@10.1007/978-981-13-3194-7_33].
RecyGlide is a novel forearm haptic display to provide multimodal stimuli. RecyGlide consists of one inverted five-bar linkage 2-DoF system installed parallel to the radius, which produce a sliding force along the user’s forearm. The second stimulus is vibration; two vibration motors are placed in the device’s edges (see Fig. 2 (b)). The schematic and 3D representation are shown in Fig 2.
The user study aims to identify the advantages of multimodal stimuli use in comparison with monomodal sensations. The experiment consists of multimodal and monomodal pattern recognition by users. In our hypothesis, two tactile channels could improve the perception of patterns.
Device Development
==================
$RecyGlide$ provides the sensation of vibration, contact at one point, and sliding at the user’s forearm. The location of the haptic contact point is determined using kinematics model of inverted five-bar linkages, inspired by $LinkTouch$ technology [@tsetserukou2014]. The second stimulus is generated by two vibration motors located on the extreme sides of the device. The two types of stimuli allow creating different patterns at the forearm. Also, it could be used to interact with the VR environment, e.g., the sensation of submerging in liquids, the felling of an animal movement in the forearm, or information delivery about the relative location.
The device has 2-DOF defined by the action of two servomotors. The slippage stimulus is produced by the movement of the motors in the same direction. Conversely, the movement of the motors in the opposite direction generates the force stimulus. The derivation of the previous stimuli creates other stimuli like temperature or pressure.
$RecyGlide$ location is convenient for hand tracking systems. Commercial tracking systems have different principles to achieve their objective. However, the use of a device in hand decreases the performance. In the case of a visual track, if the haptic device is located in hand, the typical shape of the hand changes producing poor tracking performance. For systems with trackers like HTC, it is uncomfortable for the user to wear two devices in hand. The device has been designed to adapt ergonomically to the user’s forearm, allowing free movement of the hand when working in the virtual reality environment.
The technical characteristics are listed in the Table \[char\]. The table shows the type of servomotors,and also the weight, the material of the device.
---------------------- -----------------
Motors Hitec HS-40
Weight $\ 95 g$
Material PLA and TPU 95A
Max. normal force at
contact point $2\ N$
---------------------- -----------------
: Technical specification of RecyGlide.[]{data-label="char"}
RecyGlide is electronically composed by an Arduino MKR 1000, servomotors and vibration motors. This Arduino model helps for IoT applications because of its wifi module. The Arduino is in charge of signal generation to the motors and communication wifi TCP/IP to the computer. The device maintains constant wifi communication with the computer throws a python script. A virtual socket transmits the data from python to the VR application in Unity.
In the experiment, a TCP/ IP server in Arduino was designed. The server provides direct access to the device, avoiding the use of the computer. This utility allows generating apps for cellphones too.
User Study
==========
The objective of the following experiment is to analyze the user’s perception and recognition of patterns when mononodal and multimodal stimuli are rendered on the forearm, and to determine if the multimodal stimuli increase the user’s perception of the contact point position. The first user experience is a contact stimulus over the cutaneous area by the sliding action of the contact point generated by the inverted five-bar linkages device. The second user experience implements stimuli by the combination of vibrating motors and the sliding of the contact point generated by the inverted five-bar linkages device. The results of the experiment will help to understand if the multimodal stimuli improves the perception the position generated by *RecyGlide* device.
Experimental Design
-------------------
For the execution of this experiment, a pattern bank of 6 different combinations between displacement and vibratory signals was designed and is shown in the Fig. \[fig:patterns\]. In the first group of patterns, A (Small Distance (SD): progress of 25%), B (Medium Distance (MD): progress of 50%) and C (Large Distance (LG): progress of 75%), where monomodal stimuli are delivered; the second group, D (Small Distance with vibration (SDV): progress of 25%), E (Medium Distance with vibration (MDV): progress of 50%) and F (Large Distance with vibration (LDV): progress of 75%), includes multimodal stimuli.The vibration is delivered progressively according to the position of the contact point: while the position of the contact point is nearest to the edge where the vibration motor is located, the vibration frequency is higher; when the contact point is located at the middle distance, the vibration is the same in both vibration motors. The higher frequency used in the vibration motors is equal to $500 Hz$. The sliding speed of the contact point over the skin is constant and has a value of $23 mm/s$.
Experimental Setup
------------------
The user was asked to sit in front of a desk, and to wear the $RecyGlide$ device on the right forearm. The device was connected to one Arduino MKR1000. From the python console, the six patterns were sent to the micro-controller throw TCP/IP communication. To reduce the external stimuli, the users wear headphones with white noise. A physical barrier interrupted the vision of the users to their right arm. Before each section of the experiment, a training session was conducted, where all the patterns were delivered to the users five times. Six participants volunteering complete the experiments, two women and four men, with an average age of 27 years old. Each pattern was delivered on their forearm five times in a random order.
Results
-------
To summarize the data obtained in the experiment, a confusion matrix is tabulated in the Table \[confussion\]. The diagonal term
|
{
"pile_set_name": "ArXiv"
}
|
---
author:
- |
Malika Chassan$^{1,2}$ , Jean-Marc Azaïs$^1$,\
Guillaume Buscarlet$^3$, Norbert Suard$^2$\
[ $(^1)$ Institut de Mathématiques de Toulouse, Université Toulouse 3, France]{}\
[ $(^2)$ CNES, Toulouse, France]{}\
[ $(^3)$ Thales Alenia Space, Toulouse, France]{}\
[ malika.chassan@math.univ-toulouse.fr]{}
bibliography:
- 'biblio.bib'
title: A proportional hazard model for the estimation of ionosphere storm occurrence risk
---
Introduction
============
Severe magnetic storms are feared events for integrity and continuity of GPS-EGNOS navigation system and an accurate modeling of this phenomena is necessary. Our aim is to estimate the intensity of apparition of extreme magnetic storm per time unit (year).
Our data set, retrieved from [@noaaKpap], consists of 80 years of registration of the so called 3 hours ap index (for “planetary amplitude”). The ap index quantifies the intensity of planetary geomagnetic activity, using data from 13 observatories. Although the equatorial region is not covered by these 13 observatories, they are spread all over the earth and the coverage of the ap index is rather global. The ap index is the linear transformation of the quasi log-scale index Kp, with the same sampling step of 3 hours. The Kp index, and hence the ap index, corresponds to a maximal variation of the magnetic field over a 3 hours period. See [@noaaKpap] for more details on geomagnetic indices. The ap index is available from 1932 to present but for our analysis we will use only the 7 complete solar cycles of the data set, from the 17th (on the general list) which starts on September 1933, to the 23th which ends on December 2008.
There are other data available for the study of the ionosphere magnetic activity, each of them with advantages and disadvantages:
- the aa index (for “antipodal amplitude”). Although this index is available since 1868, it is calculated from only two nearly antipodal geomagnetic stations in England and Australia. Thus, this indice does not take into account all the magnetic activity of the ionosphere.
- the Dst (Disturbance storm time). This index is restricted to the equatorial magnetic perturbation (see Figure \[fig : carte\_obs\]). Moreover, there are only 57 years of registration available against 80 for the ap index. Nonetheless, this indice gets the advantage to be an unbounded integer contrary to the ap index which lies in a finite set of non consecutive positive integers (see Section \[section : difficulties\]).
- the raw geomagnetic data are also available for many geomagnetic observatories. Oldest observations date back to 1883 for hourly values and to 1969 for 1 minute values. They consist of the measure by magnetometers of magnetic field variations. The disadvantage of this data is the presence of gaps in the recording (with gap lengths varying from one month to several years depending on the observatory). The principal disadvantage of these data is the quantity of pre-treatments required.
Since all these index show a strong correlation rate [@Rifa], we chose to use only one indice to make our analyses. We opted for the ap index. The main advantage of this data set is the large amount of data. Moreover, there is no gap in the ap index, contrary to raw geomagnetic data. Finally, the ap index is more global than aa index or Dst, as one can see on Figure \[fig : carte\_obs\].
![Positions of the observatories for the Dst ($\bigstar$) and the Kp/ap indices ().[]{data-label="fig : carte_obs"}](Fig1.jpg){width="8cm" height="5.5cm"}
Intensive storms being scarce, classical statistical methods for probability estimation, as empirical frequency, are not precise enough. In many domains, the Extreme Value Theory (EVT) enables to estimate the probability of scarce extreme events. But, because of, among other things, the finite discrete form of our data and the obvious non stationary behavior, the EVT cannot be applied.\
In Section 2, we develop the arguments showing that a use of classical EVT is not achievable. In Section 3, we describe our new proportional hazard model. This is the main contribution of this paper. The description of parameter estimators could be found in Section 4. The Section 5 is dedicated to the presentation of applications to our data set.
Difficulties to directly apply EVT {#section : difficulties}
===================================
As said before, the first obstacle to direct application of EVT is the bounded discrete form of our data. The ap index varies in the set $\{$0, 2, 3, 4, 5, 6, 7, 9, 12, 15, 18, 22, 27, 32, 39, 48, 56, 67, 80, 94, 111, 132, 154, 179, 207, 236, 300, 400$\}$. The application of Extreme Value Theory assumes the continuity of the probability distribution and it is well known that EVT does not apply to discrete finite observations, see for example [@Anderson1970].
The fact that finite discrete data do not enter in the scope of the theory is not the only issue. Indeed, in case of peaks over threshold modeling, one has to choose a threshold. The choice of the optimal threshold is made analyzing the behavior of the parameters according to a threshold variation. This is, generally speaking, not possible with discrete data. For example, see the work of Cooley, Nychka and Naveau [@CooleyNaveau2007], where the low precision of the measure makes data almost discrete. Here, when the threshold grows up, one can observe a sawtooth behavior of parameters estimators and this makes the threshold selection troublesome.\
A second problem is that ap index data obviously show a non stationary pattern. It is well known that the sun activity follows cycles with a duration of about 11 years. Corresponding cycles are observable in ap index behavior and must be taken into account for model assessment. This behavior implies that the probability of a magnetic storm occurrence depends on the position into the cycle. See Figure \[Cycle2\], for example.
![The ap index during the first complete cycle (17$^{th}$ on the general list, from September 1933 to February 1944). The dotted vertical line represents the peak.[]{data-label="Cycle2"}](Fig2.jpg){width="8cm" height="6.5cm"}
One can see the first complete solar cycle of the data set. Its middle is indicated by a vertical dotted line. One obviously remarks that strong storms (characterized by a high ap index level) occur principally during the second half of the cycle. Thus, it is not realistic to model this behavior by a standard stationary extreme value model (e.g. with constant parameters). A more efficient approach will be to include non-stationarity in parameters estimation. But once again, for this type of processes, there is no general theory allowing such a modeling.
In various research fields like hydrology, non stationary extreme models are proposed. For example, see the work of Jonathan and Ewans [@Jonathan2011]. In this paper, authors want to model the seasonality of extreme waves in the gulf of Mexico. Occurrence rate and intensity of storm peak events vary with season. To model this seasonal effect, the authors have chosen to express the Generalized Pareto parameters as a function of seasonal degree using a Fourier form. But this approach supposes that the classical EVT can be applied, and this is not the case with the data set used in this paper.
Model description
=================
In this section, we give a precise definition of what we call a storm, describe data and pretreatments (mostly declustering and time warping). We also describe the model we built and its advantages.
Storm definition, declustering
------------------------------
Ionospheric perturbations are classified in a standardized way using ap index, according to the Table 1:
**Ionosphere Condition** **Kp-index** **ap index**
-------------------------- -------------- ----------------
Quiet 0-1 <7
Unsettled 2 7 to <15
Active 3 15 to <27
Minor storm 4 27 to <48
Major storm 5 48 to <80
Severe storm 6 80 to <140
Large severe 7 140 to <240
Extreme 8 240 to <400
Extreme 9 $\geq$ 400
: Relation between Kp, ap and ionosphere activity
\
\
We introduce a declustering process of the data in order to consider only one event with the highest intensity even through there are different periods of high intensity separated by less active ones (lower indices). See Chapter 5.3 in [@Coles2001] for example. This so called Runs Declustering process allows to precisely define what we consider as a storm. We have to set two parameters:
- a *low level*, the threshold above which we consider that a storm begins (typically 111, 132 or 154);
- the run length *r*, the minimal number of observations below the low level between two events for them to be consider independent.
Thus, two exceedances of the low level
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: 'Fragmentation functions for eta mesons are extracted at next-to-leading order accuracy of QCD in a global analysis of data taken in electron-positron annihilation and proton-proton scattering experiments. The obtained parametrization is in good agreement with all data sets analyzed and can be utilized, for instance, in future studies of double-spin asymmetries for single-inclusive eta production. The Lagrange multiplier technique is used to estimate the uncertainties of the fragmentation functions and to assess the role of the different data sets in constraining them.'
author:
- 'Christine A. Aidala'
- Frank Ellinghaus
- Rodolfo Sassot
- 'Joseph P. Seele'
- Marco Stratmann
title: Global Analysis of Fragmentation Functions for Eta Mesons
---
[^1]
Introduction
============
Fragmentation functions (FFs) are a key ingredient in the perturbative QCD (pQCD) description of processes with an observed hadron in the final-state. Similar to parton distribution functions (PDFs), which account for the universal partonic structure of the interacting hadrons, FFs encode the non-perturbative details of the hadronization process [@ref:ffdef]. When combined with the perturbatively calculable hard scattering cross sections, FFs extend the ideas of factorization to a much wider class of processes ranging from hadron production in electron-positron annihilation to semi-inclusive deep-inelastic scattering (SIDIS) and hadron-hadron collisions [@ref:fact].
Over the last years, our knowledge on FFs has improved dramatically [@ref:ff-overview] from first rough models of quark and gluon hadronization probabilities [@ref:feynman] to rather precise global analyses at next-to-leading order (NLO) accuracy of QCD, including estimates of uncertainties [@ref:dsspion; @ref:dssproton; @ref:akk; @ref:hirai]. While the most accurate and clean information used to determine FFs comes from single-inclusive electron-positron annihilation (SIA) into hadrons, such data do not allow disentanglement of quark from anti-quark fragmentation and constrain the gluon fragmentation only weakly through scaling violations and sub-leading NLO corrections. Modern global QCD analyses [@ref:dsspion; @ref:dssproton] utilize to the extent possible complementary measurements of hadron spectra obtained in SIDIS and hadron-hadron collisions to circumvent these shortcomings and to constrain FFs for all parton flavors individually.
Besides the remarkable success of the pQCD approach in describing all the available data simultaneously, the picture emerging from such comprehensive studies reveals interesting and sometimes unexpected patterns between the FFs for different final-state hadrons. For instance, the strangeness-to-kaon fragmentation function obtained in Ref. [@ref:dsspion] is considerably larger than those assumed previously in analyses of SIA data alone [@ref:kretzer]. This has a considerable impact on the extraction of the amount of strangeness polarization in the nucleon [@ref:dssv] from SIDIS data, which in turn is linked to the fundamental question of how the spin of the nucleon is composed of intrinsic spins and orbital angular momenta of quarks and gluons.
Current analyses of FFs comprise pions, kaons, protons [@ref:dsspion; @ref:dssproton; @ref:akk; @ref:hirai], and lambdas [@ref:dsv; @ref:akk] as final-state hadrons. In this respect, FFs are a much more versatile tool to explore non-perturbative aspects of QCD than PDFs where studies are mainly restricted to protons [@ref:cteq; @ref:otherpdfs]. In the following, we extend the global QCD analyses of FFs at NLO accuracy as described in Refs. [@ref:dsspion; @ref:dssproton] to eta mesons and estimate the respective uncertainties with the Lagrange multiplier method [@ref:lagrange; @ref:dsspion; @ref:dssv]. We obtain a parametrization from experimental data for single-inclusive eta meson production in SIA at various center-of-mass system (c.m.s.) energies $\sqrt{S}$ and proton-proton collisions at BNL-RHIC in a wide range of transverse momenta $p_T$. We note two earlier determinations of eta FFs in Refs. [@ref:greco] and [@ref:indumathi] which are based on normalizations taken from a Monte Carlo event generator and $SU(3)$ model estimates, respectively. In both cases, parametrizations are not available.
The newly obtained FFs provide fresh insight into the hadronization process by comparing to FFs for other hadrons. In particular, the peculiar wave function of the eta, $|\eta\rangle\simeq |u\bar{u}+d\bar{d}-2s\bar{s}\rangle$, with all light quarks and anti-quarks being present, may reveal new patterns between FFs for different partons and hadrons. The similar mass range of kaons and etas, $m_{K^0}\simeq 497.6\,\mathrm{MeV}$ and $m_{\eta}\simeq 547.9\,\mathrm{MeV}$, respectively, and the presence of strange quarks in both wave functions makes comparisons between the FFs for these mesons especially relevant. Of specific interest is also the apparently universal ratio of eta to neutral pion yields for $p_T\gtrsim 2\,\mathrm{GeV}$ in hadron-hadrons collisions across a wide range of c.m.s. energies, see, e.g., Ref. [@ref:phenix2006], and how this is compatible with the extracted eta and pion FFs.
In addition, the availability of eta FFs permits for the first time NLO pQCD calculations of double-spin asymmetries for single-inclusive eta meson production at high $p_T$ which have been measured at RHIC [@ref:ellinghaus] recently. Such calculations are of topical interest for global QCD analyses of the spin structure of the nucleon [@ref:dssv]. Finally, the set of eta FFs also provides the baseline for studies of possible modifications in a nuclear medium [@ref:nuclreview; @ref:nffs], for instance, in deuteron-gold collisions at RHIC [@ref:phenix2006].
The remainder of the paper is organized as follows: next, we give a brief outline of the analysis. In Sec. \[sec:results\] we present the results for the eta FFs, compare to data, and discuss our estimates of uncertainties. We conclude in Sec. \[sec:conclusions\].
Outline of the Analysis\[sec:outline\]
======================================
Technical framework and parametrization \[subsec:outline\]
----------------------------------------------------------
The pQCD framework at NLO accuracy for the scale evolution of FFs [@ref:evol] and single-inclusive hadron production cross sections in SIA [@ref:eenlo] and hadron-hadron collisions [@ref:ppnlo] has been in place for quite some time and does not need to be repeated here. Likewise, the global QCD analysis of the eta FFs itself follows closely the methods outlined in a corresponding fit of pion and kaon FFs in Ref. [@ref:dsspion], where all the details can be found. As in [@ref:dsspion; @ref:dssproton] we use the Mellin technique as described in [@ref:mellin; @ref:dssv] to implement all NLO expressions. Here, we highlight the differences to similar analyses of pion and kaon FFs and discuss their consequences for our choice of the functional form parameterizing the FFs of the eta meson.
As compared to lighter hadrons, in particular pions, data with identified eta mesons are less abundant and less precise. Most noticeable is the lack of any experimental information from SIDIS so far, which provided the most important constraints on the separation of contributions from $u$, $d$, and $s$ (anti-)quarks fragmenting into pions and kaons [@ref:dsspion]. Since no flavor-tagged data exist for SIA either, it is inevitable that a fit for eta FFs has considerably less discriminating power. Hence, instead of extracting the FFs for the light quarks and anti-quarks individually, we parametrize the flavor singlet combination at an input scale of $\mu_0=1\,\mathrm{GeV}$, assuming that all FFs are equal, i.e., $D^{\eta}_u=D^{\eta}_{\bar{u}}=D^{\eta}_d=D^{\eta}_{\bar{d}}=
D^{\eta}_s=D^{\eta}_{\bar{s}}$. We use the same flexible functional form as in Ref. [@ref:dsspion] with five fit parameters, $$\begin{aligned}
\label{eq:ansatz}
D_{i}^{\eta}(z,\mu_0) =
N_{i} \,z^{\alpha_{i}}(1-z)^{\beta_{i}} [1+\gamma_{i} (1-z)^{\delta_{i}}]\,\,\, \times\,\,\,\,\,\,\, \nonumber\\
\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,
\frac{1}{B[2
|
{
"pile_set_name": "ArXiv"
}
|
---
author:
- 'M. C. Wyatt'
date: 'Submitted 27 September 2004, Accepted 13 December 2004'
title: 'The Insignificance of P-R Drag in Detectable Extrasolar Planetesimal Belts'
---
Introduction {#s:intro}
============
Some 15% of nearby stars exhibit more infrared emission than that expected from the stellar photosphere alone (e.g., Aumann et al. 1984). This excess emission comes from dust in orbit around the stars and its relatively cold temperature implies that it resides at large distances from the stars, 30-200 AU, something which has been confirmed for the disks which are near enough and bright enough for their dust distribution to be imaged (Holland et al. 1998; Greaves et al. 1998; Telesco et al. 2000; Wyatt et al. 2004). Because the dust would spiral inwards due to Poynting-Robertson (P-R) drag or be destroyed in mutual collisions on timescales which are much shorter than the ages of these stars, the dust is thought to be continually replenished (Backman & Paresce 1993), probably from collisions between km-sized planetesimals (Wyatt & Dent 2002). In this way the disks are believed to be the extrasolar equivalents of the Kuiper Belt in the Solar System (Wyatt et al. 2003).
These debris disks will play a pivotal role in increasing our understanding of the outcome of planet formation. Not only do these disks tell us about the distribution of planetesimals resulting from planet formation processes, but they may also provide indirect evidence of unseen planets in their systems. Models have been presented that show how planets can cause holes at the centre of the disks and clumps in the azimuthal distribution of dust, both of which are commonly observed features of debris disks. Many of these models require the dust to migrate inward due to P-R drag to be valid; e.g., in the model of Roques et al. (1994) the inner hole is caused by a planet which prevents dust from reaching the inner system which would otherwise be rapidly replenished by P-R drag (e.g., Strom, Edwards & Skrutskie 1993), and clumps arise in models when dust migrates inward due to P-R drag and becomes trapped in a planet’s resonances (Ozernoy et al. 2000; Wilner et al. 2002; Quillen & Thorndike 2002). Alternative models exist for the formation of both inner holes and clumps; e.g., in some cases inner holes may be explained by the sublimation of icy grains (Jura et al. 1998) or by the outward migration of dust to the outer edge of a gas disk (Takeuchi & Artymowicz 2001), and clumps may arise from the destruction of planetesimals which were trapped in resonance with a planet when it migrated out from closer to the star (Wyatt 2003).
The focus of the models on P-R drag is perhaps not surprising, as the dynamical evolution of dust in the solar system is undeniably dominated by the influence of P-R drag, since this is the reason the inner solar system is populated with dust (Dermott et al. 1994; Liou & Zook 1999; Moro-Martín & Malhotra 2002). However, there is no reason to expect that the physics dominating the structure of extrasolar planetesimal disks should be the same as that in the solar system. In fact the question of whether any grains in a given disk suffer significant P-R drag evolution is simply determined by how dense that disk is (Wyatt et al. 1999). It has been noted by several authors that the collisional lifetime of dust grains in the well studied debris disks is shorter than that of P-R drag (e.g., Backman & Paresce 1993; Wilner et al. 2002; Dominik & Decin 2003), a condition which means that P-R drag can be ignored in these systems.
Clearly it is of vital importance to know which physical processes are at play in debris disks to ascertain the true origin of these structures. In this paper I show that P-R drag is not an important physical process in the disks which have been detected to date because collisions occur on much shorter timescales meaning that planetesimals are ground down into dust which is fine enough to be removed by radiation pressure before P-R drag has had a chance to act. In §\[s:sm\] a simple model is derived for the spatial distribution of dust created in a planetesimal belt. In §\[s:em\] this model is used to determine the emission spectrum of these dust disks. A discussion of the influence of P-R drag in detectable and detected debris disks as well as of the implications for how structure in these disks should be modelled and interpreted is given in §\[s:disc\].
Balance of Collisions and P-R Drag {#s:sm}
==================================
In this simple model I consider a planetesimal belt at a distance of $r_0$ from a star of mass $M_\star$ which is producing particles all of the same size, $D$. The orbits of those particles are affected by the interaction of the dust grains with stellar radiation which causes a force which is inversely proportional to the square of distance from the star, and which is commonly defined by the parameter $\beta=F_{rad}/F_{grav}$ (Burns et al. 1979; Gustafson 1994). This parameter is a function of particle size and for large particles $\beta \propto 1/D$. The tangential component of this force is known as Poynting-Robertson drag, or P-R drag. This results in a loss of angular momentum from the particle’s orbit which makes it spiral in toward the star. Assuming the particle’s orbit was initially circular, the migration rate is: $$\dot{r}_{pr} = -2\alpha/r, \label{eq:rpr}$$ where $\alpha = 6.24 \times 10^{-4} (M_\star/M_\odot)\beta$ AU$^2$yr$^{-1}$ (Wyatt et al. 1999).
On their way in, dust grains may collide with other dust grains. The mean time between such collisions depends on the dust density: $$t_{coll}(r) = t_{per}(r) / 4\pi \tau_{eff}(r), \label{eq:tcoll}$$ where $t_{per} = \sqrt{(r/a_\oplus)^3(M_\odot/M_\star)}$ is the orbital period at this distance from the star, and $\tau_{eff}$ is the effective optical depth of the disk, or the surface density of cross-sectional area of the dust (Wyatt et al. 1999). If the collisions are assumed to be destructive then the distribution of dust in the disk can be determined by considering the amount of material entering and leaving an annulus at $r$ of width $dr$. The steady state solution is that the amount entering the annulus due to P-R drag is equal to that leaving due to P-R drag and that which is lost by collisions (i.e., the continuity equation): $$d[n(r)\dot{r}_{pr}(r)]/dr = -N^{-}(r), \label{eq:cont}$$ where $n(r)$ is the one dimensional number density (number of particles per unit radius), and $N^{-}(r) = n(r)/t_{coll}(r)$ is the rate of collisional loss of $n(r)$. Since in a thin disk $\tau_{eff}(r) = 0.125 D^2 n(r)/r$, this continuity equation can be solved analytically to find the variation of effective optical depth with distance from the star (Wyatt 1999): $$\begin{aligned}
\tau_{eff}(r) & = & \frac{\tau_{eff}(r_0)}
{1+4\eta_0(1-\sqrt{r/r_0})} \label{eq:prwcoll} \\
\eta_0 & = &
5000 \tau_{eff}(r_0)\sqrt{(r_0/a_\oplus)(M_\odot/M_\star)}/\beta
\label{eq:eta0}\end{aligned}$$ where this distribution has been scaled by the boundary condition that at $r_0$, $\tau_{eff} = \tau_{eff}(r_0)$.
This distribution is shown in Fig. \[fig:teffeta0\]. The result is that in disks which are very dense, i.e., those for which $\eta_0 \gg 1$, most of the dust is confined to the region where it is produced. Very little dust in such disks makes it into the inner regions as it is destroyed in mutual collisions before it gets there. In disks which are tenuous, however, i.e., those for which $\eta_0 \ll 1$, all of the dust makes it to the star without suffering a collision. The consequence is a dust distribution with a constant surface density as expected from P-R drag since this is the solution to $d[n(r)\dot{r}_{pr}] = 0$. Dust distributions with $\eta_0 \approx 1$ have a distribution which reflects the fact that some fraction of the dust migrates in without encountering another dust grain, while other dust grains are destroyed. This can be understood by considering that $\eta_0 = 1$ describes the situation in which the collisional lifetime in the source region given by eq. \[eq:tcoll\] equals the time it takes for a dust grain to
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: 'We are carrying out a search for all radio loud Active Galactic Nuclei observed with [*XMM-Newton*]{}, including targeted and field sources to perform a multi-wavelength study of these objects. We have cross-correlated the Verón-Cetty & Verón (2010) catalogue with the [*XMM-Newton*]{} Serendipitous Source Catalogue (2XMMi) and found around 4000 sources. A literature search provided radio, optical, and X-ray data for 403 sources. This poster summarizes the first results of our study.'
---
Introduction and Sample
=======================
![Radio loud (green) and radio quiet (blue and red) AGN. Rx is the ratio between 5 GHz and 2-10 keV emission. R is the ratio between 5 GHz and B-band emission. Boundares from Panessa et al. 2007. Blue points are sources classified as radio quiet by R and Rx parameters Red points are sources classified as radio quiet by the R parameter and radio loud by the Rx parameter []{data-label="loudquiet"}](logr_logrx.ps){width="3.4in"}
Bianchi et al. (2009a,b) presented the Catalogue of Active Galactic Nuclei (AGN) in the [*XMM-Newton*]{} Archive (CAIXA). They focused on the radio-quiet, X-ray unobscured (NH $< 2\times\ 10^{22}$ cm$^{-2}$) AGN observed by XMM-Newton in targeted observations. We are carrying out a similar multiwavelength study, for both targeted and field radio-loud AGN observed by [*XMM Newton*]{}. We cross-correlated the Verón-Cetty & Verón (2010) catalogue (Quasars and Active Galactic Nuclei, 13th edition) with the [*XMM-Newton*]{} Serendipitous Source Catalogue (2XMMi, Watson et al., 2009) Third Data Release, and obtained a list of around 4000 sources. However, only 10% of the sources have published optical and radio data. Our sample consists of all AGN (403 total, Figures \[loudquiet\] and \[lxlb\]) with available X-ray (2-10 keV), optical (B-band) and radio (5 GHz) data.
![X-ray versus B-band luminosities. For optical luminosities higher than 10$^{-6}$ erg/s/Hz radio loud (green) AGN are brighter in X-rays than radio quiet (red and blue). This effect is stronger at higher luminosities (10$^{-5}$-10$^{-4}$ erg/s/Hz), where radio loud AGN deviate from the low luminosities correlation. X-ray emission in radio loud sources could have larger contributions from the jet.[]{data-label="lxlb"}](lumin210_luminb.ps){width="3.4in"}
First results and ongoing work
==============================
Radio loud sources show jet contribution to optical and X-ray emission, and are brighter in X-rays than radio quiet. Optical and X-rays are AGN dominated with small contribution from host. For optical luminosities higher than 10$^{-6}$ erg/s/Hz radio loud AGN are brighter in X-rays than radio quiet. This effect increases for higher luminosities ($10^{-5}-10^{-4}$), where loud AGN deviate from the low luminosities correlation. X-rays in radio loud sources could have higher contributions from the jet. The sample seems to be missing faint, radio loud AGN, although at this point it is not clear if this is due to selection or astrophysical effects.
While X-rays in radio loud AGN seem to come mainly from jets, other mechanisms of X-ray emission are being studied (e.g. ADAF)? A complete spectral optical and X-ray analysis, including also the 0.2-2 kev band will bring light to the origin of the X-rays in these sources. We are currently studying the sample properties according to different classifications (Seyfert and QSO or FR I and FR II morphologies), and will include IR data when available, with the goal of carrying out a systematic analysis in as many wavelengths as possible.
[4]{} natexlab\#1[\#1]{}
, S., [Bonilla]{}, N. F., [Guainazzi]{}, M., [Matt]{}, G., & [Ponti]{}, G. 2009, [A&A]{}, 501, 915
, S., [Guainazzi]{}, M., [Matt]{}, G., [Fonseca Bonilla]{}, N., & [Ponti]{}, G. 2009, [A&A]{}, 495, 421
, F., [Barcons]{}, X., & [Bassani]{} L. et al., 2009, å, 467, 519
, M. & [V[é]{}ron]{}, P. 2010, [A&A]{}, 518, A10
, M. G., [Schr[ö]{}der]{}, A. C., [Fyfe]{}, D., [et al.]{} 2009, [A&A]{}, 493, 339
|
{
"pile_set_name": "ArXiv"
}
|
---
author:
- Tarek Sayed Ahmed
title: 'On complete representability of Pinter’s algebras and related structures'
---
We answer an implicit question of Ian Hodkinson’s. We show that atomic Pinters algebras may not be completely representable, however the class of completely representable Pinters algebras is elementary and finitely axiomatizable. We obtain analagous results for infinite dimensions (replacing finite axiomatizability by finite schema axiomatizability). We show that the class of subdirect products of set algebras is a canonical variety that is locally finite only for finite dimensions, and has the superamalgamation property; the latter for all dimensions. However, the algebras we deal with are expansions of Pinter algebras with substitutions corresponding to tranpositions. It is true that this makes the a lot of the problems addressed harder, but this is an acet, not a liability. Futhermore, the results for Pinter’s algebras readily follow by just discarding the substitution operations corresponding to transpostions. Finally, we show that the multi-dimensional modal logic corresponding to finite dimensional algebras have an $NP$-complete satisfiability problem.
[^1]
Introduction
============
Suppose we have a class of algebras infront of us. The most pressing need is to try and classify it. Classifying is a kind of defining. Most mathematical classification is by axioms, either first order, or even better equations. In algebraic logic the typical question is this. Given a class of concrete set algebras, that we know in advance is elementary or is a variety. Furthermore, such algebras consist of sets of sequences (usually with the same length called the dimension) and the operations are set - theoretic, utilizing the form of elements as sets of sequences. Is there a [*simple*]{} elementary (equational) axiomatization of this class? A harder problem is: Is their a [*finite*]{} elementary (equational) axiomatization of this class?
The prime examples of such operations defined on the unit of the algebra, which is in the form of $^nU$ ($n\geq 2)$ are cylindrifiers and substitutions. For $i<n$, and $t, s\in {}^nU$, define, the equivalence relation, $s\equiv_i t$ if $s(j)=t(j)$ for all $j\neq i$. Now fix $i<n$ and $\tau\in {}^nn$, then these operations are defined as follows $$c_iX=\{s\in {}^nU: \exists t\in X, t \equiv_i s\},$$ $$s_{\tau}X=\{s\in {}^nU: s\circ \tau\in X\}.$$ Both are unary operations on $\wp(^nU)$; the $c_i$ is called the $i$th cylindrfier, while the $s_{\tau}$ is called the substitution operation corresponding to te transformation $\tau$, or simply a substitution.
For Boolean algebras this question is completely settled by Stone’s representation theorem. Every Boolean algebra is representable, equivalently, the class of Boolean algebras is finitely axiomatizable by a set of equations. This is equivalent to the completeness of propositional logic.
When we approach the realm of first order logic things tend to become much more complicated. The standard algebraisation of first order logic is cylindric algebras (where cylindrifiers are the prominent citizens) and polyadic algebras (where cylindrifiers and substitutions are the prominent citizens). Such algebras, or rather the abstract version thereof, are defined by a finite set of equations that aim to capture algebraically the properties of cylindrifiers and substitutions (and diagonal elements if present in the signature).
Let us concentrate on polyadic algebras of dimension $n$; where $n$ is a finite ordinal. A full set algebra is one whose unit is of the form $^nU$ and the non-Boolean operations are cylindrifiers and substitutions. The class of representable algebras, defined as the class of subdirect products of full set algebras is a discriminator variety that is not finitely axiomatizable for $n\geq 3$, thus the set of equations postulated by Halmos is not complete. Furthermore, when we also have diagonal elements, then there is an inevitable degree of complexity in any potential universal axiomatization.
There is another type of representations for polyadic algebras, and that is [*complete*]{} representations. An algebra is completely representable if it has a representation that preserves arbitrary meets whenever they exist. For Boolean algebras the completely representable algebras are easily characterized; they are simply the atomic ones; in particular, this class is elementary and finitey axiomatizable, one just adds the first order sentence expressing atomicity. For cylindric and polyadic algebras, again, this problem turns much more involved, This class for $n\geq 3$ is not even elementary.
Strongly related to complete representations [@Tarek], is the notion of omitting types for the corresponging multi-dimensional modal logic. Let $W$ be a class of algebras (usually a variety or at worst quasi-variety) with a Boolean reduct, having the class $RW$ as the class of representable algebras, so that $RW\subseteq W$, and for $\B\in RW$, $\B$ has top element a set of sequences having the same length, say $n$ (in our case the dimension of the algebra), and the Boolean operations are interpreted as concrete intersections and complementation of $n$-ary relatons. We say the $\L_V$, the multi-dimensional modal logic has the omitting types theorem, if whenever $\A\in V$ is countable, and $(X_i: i\in \omega)$ is a family of non-principal types, meaning that $\prod X_i=0$ for each $i\in \omega$, then there is a $\B\in RW$ with unit $V$, and an injective homomorphism $f:\A\to \wp(V)$ such that $\bigcap_{i\in \omega}f(X_i)=\emptyset$ for each $i\in \omega$.
In this paper we study, among other things, complete representability for cylindrifier free reducts of polyadic algebras, as well as omitting types for the corresponding multi-dimensional model logic. We answer a question of Hodkinson [@atomic] p. by showing that for various such reducts of polyadic algebras, atomic algebras might not be completely representable, however, they can be easily characterized by a finite simple set of first order formulas.
Let us describle our algebras in a somewhat more general setting. Let $T$ be a submonoid of $^nn$ and $U$ be a non-empty set. A set $V\subseteq {}^nU$ is called $T$ closed, if whenever $s\in V$ and $\tau\in T$, then $s\circ \tau\in V$. (For example $T$ is $T$ closed). If $V$ is $T$ closed then $\wp(V)$ denotes the set algebra $({\cal P}(V),\cap,\sim s_{\tau})_{\tau\in T}$. $\wp(^nU)$ is called a full set algebra.
Let $GT$ be a set of generators of $T$. One can obtain a variety $V_T$ of Boolean algebras with extra non-boolean operators $s_{\tau}$, $\tau\in GT$ by translating a presentation of $T$, via the finite set of generators $GT$ to equations, and stipulating that the $s_{\tau}$’s are Boolean endomorphisms.
It is known that every monoid not necessarily finite, has a presentation. For finite monoids, the multiplicative table provides one. Encoding finite presentations in terms of a set of generators of $T$ into a finite set of equations $\Sigma$, enables one to define for each $\tau\in T$, a substitution unary operation $s_{\tau}$ and for any algebra $\A$, such that $\A\models \Sigma$, $s_{\tau}$ is a Boolean endomorpsim of $\A$ and for $\sigma, \tau\in T$, one has $s_{\sigma}^{\A}\circ s_{\tau}^{\A}(a)=s_{\sigma\circ \tau}^{\A}(a)$ for each $a\in A$.
The translation of presentations to equations, guarantee that if $\A\models \Sigma$ and $a\in \A$ is non zero, then for any Boolean ultrafilter $F$ of $\A$ containing $a$, the map $f:\A\to \wp(T)$ defined via $$x\mapsto \{\tau \in T: s_{\tau}x\in F\}$$ is a homomorphism such that $f(a)\neq 0$. Such a homomorphism determines a (finite) relativized representation meaning that the unit of the set algebra is possibly only a proper subset of the square $^nn$.
Let $RT_n$ be the class of subdirect products of [*full*]{} set algebras; those set algebras whose units are squares (possibly with infinite base). One can show that $\Sigma$ above axiomatizes the variety generated by $RT_n$, but it is not obvious that $RK_n$ is closed under homomorphic images.
Indeed, if $T$ is the monoid of all non-bijective maps, that $RTA_n$ is only a quasi-variety. Such algebras are called Pinters algebras. Sagi [@sagiphd] studied the representation problem for such algebras. In his recent paper [@atomic], Hodkinson asks whether atomic such algebras are completely representable.
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: |
Background
: Measurements of $\beta$ decay provide important nuclear structure information that can be used to probe isospin asymmetries and inform nuclear astrophysics studies.
Purpose
: To measure the $\beta$-delayed $\gamma$ decay of $^{26}$P and compare the results with previous experimental results and shell-model calculations.
Method
: A $^{26}$P fast beam produced using nuclear fragmentation was implanted into a planar germanium detector. Its $\beta$-delayed $\gamma$-ray emission was measured with an array of 16 high-purity germanium detectors. Positrons emitted in the decay were detected in coincidence to reduce the background.
Results
: The absolute intensities of $^{26}$P $\beta$-delayed $\gamma$-rays were determined. A total of six new $\beta$-decay branches and 15 new $\gamma$-ray lines have been observed for the first time in $^{26}$P $\beta$-decay. A complete $\beta$-decay scheme was built for the allowed transitions to bound excited states of $^{26}$Si. $ft$ values and Gamow-Teller strengths were also determined for these transitions and compared with shell model calculations and the mirror $\beta$-decay of $^{26}$Na, revealing significant mirror asymmetries.
Conclusions
: A very good agreement with theoretical predictions based on the USDB shell model is observed. The significant mirror asymmetry observed for the transition to the first excited state ($\delta=51(10)\%$) may be evidence for a proton halo in $^{26}$P.
author:
- 'D. Pérez-Loureiro'
- 'C. Wrede'
- 'M. B. Bennett'
- 'S. N. Liddick'
- 'A. Bowe'
- 'B. A. Brown'
- 'A. A. Chen'
- 'K. A. Chipps'
- 'N. Cooper'
- 'D. Irvine'
- 'E. McNeice'
- 'F. Montes'
- 'F. Naqvi'
- 'R. Ortez'
- 'S. D. Pain'
- 'J. Pereira'
- 'C. J. Prokop'
- 'J. Quaglia'
- 'S. J. Quinn'
- 'J. Sakstrup'
- 'M. Santia'
- 'S. B. Schwartz'
- 'S. Shanab'
- 'A. Simon'
- 'A. Spyrou'
- 'E. Thiagalingam'
title: '${\bm \beta}$-delayed $\gamma$ decay of $\bm{^{26}\mathrm{P}}$: Possible evidence of a proton halo'
---
Introduction\[sec:intro\]
=========================
The detailed study of unstable nuclei was a major subject in nuclear physics during recent decades. $\beta$ decay measurements provide not only important information on the structure of the daughter and parent nuclei, but can also be used to inform nuclear astrophysics studies and probe fundamental subatomic symmetries [@Hardy2015]. The link between experimental results and theory is given by the reduced transition probabilities, $ft$. Experimental $ft$ values involve three measured quantities: the half-life, $t_{1/2}$, the $Q$ value of the transition, which determines the statistical phase space factor $f$, and the branching ratio associated with that transition, $BR$.
In the standard $\mathcal{V\!\!-\!\!A}$ description of $\beta$ decay, $ft$ values are related to the fundamental constants of the weak interaction and the matrix elements through this equation:
$$ft=\frac{\mathcal{K}}{g_V^2|\langle f|\tau|i\rangle|^2+g_A^2|\langle f|\sigma\tau|i\rangle|^2} ,
\label{eq:theo_ft}$$
where $\mathcal{K}$ is a constant and $g_{V(A)}$ are the vector (axial) coupling constants of the weak interaction; $\sigma$ and $\tau$ are the spin and isospin operators, respectively. Thus, a comparison of the experimental $ft$ values with the theoretical ones obtained from the calculated matrix elements is a good test of the nuclear wave functions obtained with model calculations. However, to reproduce the $ft$ values measured experimentally, the axial-vector coupling constant $g_A$ involved in Gamow-Teller transitions has to be renormalized [@Wilkinson1973; @WILKINSON1973_2]. The effective coupling constant $g'_A=q\times g_A$ is deduced empirically from experimental results and depends on the mass of the nucleus: The quenching factor is $q=0.820(15)$ in the $p$ shell [@Chou1993], $q=0.77(2)$ in the $sd$ shell [@Wildenthal1983], and $q=0.744(15)$ in the $pf$ shell [@Martinez1996]. Despite several theoretical approaches attempting to reveal the origin of the quenching factor it is still not fully understood [@Brown2005].
Another phenomenon which shows the limitations of our theoretical models is the so-called *$\beta$-decay mirror asymmetry*. If we assume that the nuclear interaction is independent of isospin, the theoretical description of $\beta$ decay is identical for the decay of a proton ($\beta^+$) or a neutron ($\beta^-$) inside a nucleus. Therefore, the $ft$ values corresponding to analog transitions should be identical. Any potential asymmetries are quantified by the asymmetry parameter $\delta=ft^+/ft^-1$, where the $ft^\pm$ refers to the $\beta^\pm$ decays in the mirror nuclei. The average value of this parameter is $(4.8\pm0.4)\%$ for $p$ and $sd$ shell nuclei [@Thomas2004]. From a theoretical point of view the mirror asymmetry can have two origins: (a) the possible existence of exotic *second-class currents* [@Wilkinson1970447; @PhysRevLett.38.321; @WilkinsonEPJ], which are not allowed within the framework of the standard $\mathcal{V\!\!-\!\!A}$ model of the weak interaction and (b) the breaking of the isospin symmetry between the initial or final nuclear states. Shell-model calculations were performed to test the isospin non-conserving part of the interaction in $\beta$ decay [@Smirnova2003441]. The main contribution to the mirror asymmetry from the nuclear structure was found to be from the difference in the matrix elements of the Gamow-Teller operator ($|\langle f|\sigma\tau|i\rangle|^2$), because of isospin mixing and/or differences in the radial wave functions.
Large mirror asymmetries have been reported for transitions involving halo states [@Tanihata2013]. For example, the asymmetry parameter for the $A=17$ mirror decays $^{17}$Ne$\rightarrow^{17}$F and $^{17}$N$\rightarrow^{17}$O to the first excited states of the respective daughters was measured to be $\delta=(-55\pm9)\%$ and $\delta=(-60\pm1)\%$ in two independent experiments [@Borge1993; @Ozawa1998]. This result was interpreted as evidence for a proton halo in the first excited state of $^{17}$F assuming that the fraction of the $2s_{1/2}$ component of the valence nucleons remains the same in $^{17}$Ne and $^{17}$N. However, a different interpretation was also given in terms of charge dependent effects which increase the $2s_{1/2}$ fraction in $^{17}$Ne by about 50% [@PhysRevC.55.R1633]. The latter result is also consistent with the high cross section obtained in the fragmentation of $^{17}$Ne [@Ozawa199418; @Ozawa199663], suggesting the existence of a halo in $^{17}$Ne. More recently Kanungo *et al.* reported the possiblity of a two-proton halo in $^{17}$Ne [@Kanungo200321]. An extremely large mirror asymmetry was also observed in the mirror decay of $A=9$ isobars $^{9}$Li$\rightarrow^{9}$Be and $^{9}$C$\rightarrow^{9}$B. A value of $\delta=(340\pm70)\%$ was reported for the $^{9}$Li and $^{9}$C $\beta$-decay transitions to the 11.8 and 12.2 MeV levels of their respective daughters, which is the largest ever measured [@Bergmann2001427; @Prezado2003]. Despite the low experimental interaction cross sections measured with various targets in attempts to establish the halo nature of $^{9}$C [@Ozawa199663; @Blank1997242], recent results at intermediate energies [@Nishimura2006], together with the anomalous magnetic moment [@Matsuta1995c153] and theoretical predictions [@0256-307X-27-9-092101; @PhysRevC.52.3013; @Gupta2002], make $^{9}$C a proton halo candidate. The potential relationship between large mirror asymmetries and halos is therefore clear. Precision measurements of mirror asymmetries in states involved in strong, isolated, $\beta$-decay transitions might provide a technique to probe halo nuclei that is complementary
|
{
"pile_set_name": "ArXiv"
}
|
UT-HET 039\
\
[**Shinya Kanemura**]{}$^{(a)}$ [^1], [**Shigeki Matsumoto**]{}$^{(a)}$ [^2],\
[**Takehiro Nabeshima**]{}$^{(a)}$ [^3], and [**Nobuchika Okada**]{}$^{(b)}$ [^4]\
$^{(a)}$[*Department of Physics, University of Toyama, Toyama 930-8555, Japan*]{}\
$^{(b)}$[*Department of Physics and Astronomy, University of Alabama,\
Tuscaloosa, AL 35487, USA*]{}\
Introduction
============
In spite of the tremendous success of the Standard Model (SM) of particle physics, it is widely believed that new physics beyond the SM should appear at a certain high energy scale. The main theoretical insight on this belief is based on the hierarchy problem in the SM. In other words, the electroweak scale is unstable against quantum corrections and is, in turn, quite sensitive to the ultraviolet energy scale, which is naturally taken to be the scale of new physic beyond the SM. Therefore, in order for the SM to be naturally realized as a low energy effective theory, the scale of new physics should not be far beyond the TeV scale and the most likely at the TeV scale.
After the recent success of the first collision of protons at the Large Hadron Collider (LHC) with the center of energy 7 TeV, the LHC is now taking data to explore particle physics at the TeV scale. The discovery of new physics at the TeV scale as well as the Higgs boson which is the last particle in the SM to be directly observed is the most important mission of the LHC. New physics beyond the SM, once discovered, will trigger a revolution in particle physics.
However, it is generally possible that even if new physics beyond the SM indeed exists, the energy scale of new physics might be beyond the LHC reach and that the LHC could find only the Higgs boson but nothing else. This is the so-called “nightmare scenario”. The electroweak precision measurements at the LEP may support this scenario. The LEP experiment has established excellent agreements of the SM with results and has provided very severe constraints on new physics dynamics. We consider some of non-renormalizable operators invariant under the SM gauge group as effective operators obtained by integrating out some new physics effects, where the scale of new physics is characterized by a cutoff scale of the operators. It has been shown [@LEPparadox] that the lower bound on the cutoff scale given by the results of the LEP experiment is close to 10 TeV rather than 1 TeV. This fact is the so-called “LEP paradox”. If such higher dimensional operators are from tree level effects of new physics, the scale of new physics lies around 10 TeV, beyond the reach of the LHC. As the scale of new physics becomes higher, the naturalness of the SM gets violated. However, for the 10 TeV scale, the fine-tuning required to realize the correct electroweak scale is not so significant but about a few percent level [@Kolda:2000wi]. Such little hierarchy may be realized in nature.
On the other hand, recent various cosmological observations, in particular, the Wilkinson Microwave Anisotropy Probe (WMAP) satellite [@Komatsu:2008hk], have established the $\Lambda$CDM cosmological model with a great accuracy. The relic abundance of the cold dark matter at 2$\sigma$ level is measured as $$\begin{aligned}
\Omega_{\rm CDM} h^2 = 0.1131 \pm 0.0034. \end{aligned}$$ To clarify the nature of the dark matter is still a prime open problem in particle physics and cosmology. Since the SM has no suitable candidate for the cold dark matter, the observation of the dark matter indicate new physics beyond the SM. Many candidates for dark matter have been proposed in various new physics models.
Among several possibilities, the Weakly Interacting Massive Particle (WIMP) is one of the most promising candidates for dark matter and in this case, the dark matter in the present universe is the thermal relic and its relic abundance is insensitive to the history of the early universe before the freeze-out time of the dark matter particle, such as the mechanism of reheating after inflation etc. This scenario allows us to evaluate the dark matter relic density by solving the Boltzmann equation, and we arrive at a very interesting conclusion: in order to obtain the right relic abundance, the WIMP dark matter mass lies below the TeV. Therefore, even if the nightmare scenario is realized, it is plausible that the mass scale of the WIMP dark matter is accessible to the LHC.
In this paper, we extend the SM by introducing the WIMP dark matter in the context of the nightmare scenario, and investigate a possibility that the WIMP dark matter can overcome the nightmare scenario through various phenomenology such as the dark matter relic abundance, the direct detection experiments for the dark matter particle, and LHC physics. Among many possibilities, we consider the “worst case” that the WIMP dark matter is singlet under the SM gauge group, otherwise the WIMP dark matter can be easily observed through its coupling with the weak gauge boson. In this setup, the WIMP dark matter communicates with the SM particles through its coupling with the Higgs boson, so that the Higgs boson plays a crucial role in phenomenology of dark matter.
The paper is organized as follows. In the next section, we introduce the WIMP dark matter which is singlet under the SM gauge group. We consider three different cases for the dark matter particle; a scalar, fermion and vector dark matter, respectively. In section 3, we investigate cosmological aspects of the WIMP dark matter and identify a parameter region which is consistent with the WMAP observation and the direct detection measurements for the WIMP dark matter. The collider signal of the dark matter particle is explored in section 4. The dark matter particles are produced at the LHC associated with the Higgs boson production. The last section is devoted to summary and discussions.
The Model {#Sec2}
=========
Since all new particles except a WIMP dark matter are supposed to be at the scale of 10 TeV in the nightmare scenario, the effective Lagrangian at the scale of 1 TeV involves only a field of the WIMP dark matter and those of the SM particles. We consider the worst case of the WIMP dark matter, namely the dark matter is assumed to be singlet under gauge symmetries of the SM. Otherwise, the WIMP dark matter accompanies a charged partner with mass at the scale less than 1 TeV, which would be easily detected at collider experiments in near future, and such a scenario is not nightmare. We postulate the global $Z_2$ symmetry (parity) in order to guarantee the stability of the dark matter, where the WIMP dark matter has odd charge while particles in the SM have even one. We consider three cases for the spin of the dark matter; the scalar dark matter $\phi$, the fermion dark matter $\chi$, and the vector dark matter $V_\mu$. In all cases, the dark matter is assumed to be an identical particle for simplicity, so that these are described by real Klein-Gordon, Majorana, and real Proca fields, respectively.
The Lagrangian which is invariant under the symmetries of the SM is written as $$\begin{aligned}
{\cal L}_S
&=&
{\cal L}_{\rm SM} + \frac{1}{2} \left(\partial \phi\right)^2 - \frac{M_S^2 }{2} \phi^2
- \frac{c_S}{2}|H|^2 \phi^2 - \frac{d_S}{4!} \phi^4,
\label{Lagrangian S}
\\
{\cal L}_F
&=&
{\cal L}_{\rm SM} + \frac{1}{2} \bar{\chi} \left(i\Slash{\partial} - M_F\right) \chi
- \frac{c_F}{2\Lambda} |H|^2 \bar\chi \chi
- \frac{d_F}{2\Lambda} \bar{\chi}\sigma^{\mu\nu}\chi B_{\mu\nu},
\label{Lagrangian F}
\\
{\cal L}_V
&=&
{\cal L}_{\rm SM} - \frac{1}{4} V^{\mu\nu} V_{\mu \nu} + \frac{M_V^2 }{2} V_\mu V^\mu
+ \frac{c_V}{2} |H|^2 V_\mu V^\mu - \frac{d_V}{4!} (V_\mu V^\mu)^2,
\label{Lagrangian V}\end{aligned}$$ where $V_{\mu\nu} = \partial_\mu V_\nu - \partial_\nu V_\mu$, $B_{\mu\nu}$ is the field strength tensor of the hypercharge gauge boson, and ${\cal L}_{\rm SM}$ is the Lagrangian of the SM with $H$ being the Higgs boson. The last terms in RHS in Eqs.(\[Lagrangian S\]) and (\[Lagrangian V\]) proportional to coefficients $d_S$ and $d_V$ represent self-interactions of the WIMP dark matter, which are not relevant for the following discussion. On the other hand, the last term in RHS in Eq.(\[Lagrangian F\]) proportional to the coefficient $d_F$ is the interaction between WIMP dark matter and the hypercharge gauge boson, however this term is most likely obtained by 1-loop diagrams of new physics dynamics at the scale of 10 TeV, since the dark matter particle carries no hypercharge.
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: 'We present a fast and versatile method to calculate the characteristic spectrum $h_c$ of the gravitational wave background (GWB) emitted by a population of eccentric massive black hole binaries (MBHBs). We fit the spectrum of a reference MBHB with a simple analytic function and show that the spectrum of any other MBHB can be derived from this reference spectrum via simple scalings of mass, redshift and frequency. We then apply our calculation to a realistic population of MBHBs evolving via 3-body scattering of stars in galactic nuclei. We demonstrate that our analytic prescription satisfactorily describes the signal in the frequency band relevant to pulsar timing array (PTA) observations. Finally we model the high frequency steepening of the GWB to provide a complete description of the features characterizing the spectrum. For typical stellar distributions observed in massive galaxies, our calculation shows that 3-body scattering alone is unlikely to affect the GWB in the PTA band and a low frequency turnover in the spectrum is caused primarily by high eccentricities.'
author:
- |
Siyuan Chen,$^1$[^1] Alberto Sesana$^1$[^2] and Walter Del Pozzo$^{1,2}$\
$^1$School of Physics & Astronomy, University of Birmingham, Birmingham, B15 2TT, UK\
$^2$Dipartimento di Fisica “Enrico Fermi”, Università di Pisa, Pisa I-56127, Italy
bibliography:
- 'bibliography.bib'
date: 'Accepted XXX. Received YYY; in original form ZZZ'
title: Efficient computation of the gravitational wave spectrum emitted by eccentric massive black hole binaries in stellar environments
---
\[firstpage\]
black hole physics – gravitational waves – galaxies: kinematics and dynamics – methods: analytical
Introduction {#sec:Introduction}
============
It is now well established that most (potentially all) massive galaxies harbour massive black holes (MBHs) in their centre [see @KormendyHo:2013 and references therein]. In the standard hierarchical cosmological model [@WhiteRees:1978], present day galaxies grow in mass and size by accreating cold gas from the cosmic web [@2009Natur.457..451D] and by merging with other galaxies [@1993MNRAS.264..201K]. In a favoured scenario in which MBHs are ubiquitous up to high redshift, following the merger of two galaxies, the central MBHs hosted in their nuclei sink to the centre of the merger remnant eventually forming a bound binary system [@BegelmanBlandfordRees:1980]. The binary orbit shrinks because of energy and angular momentum exchange with the surrounding ambient, stars and cold gas [see @DottiSesanaDecarli:2012 for a recent review], to the point at which gravitational wave (GW) emission takes over, efficiently bringing the pair to coalescence. Since galaxies are observed to merge quite frequently and the observable Universe encompasses several billions of them, a sizeable cosmological population of MBHBs is expected to be emitting GWs at any time [@SesanaVecchioColacino:2008 hereinafter SVC08].
At nHz frequencies, their signal is going to be captured by pulsar timing arrays [PTAs @FosterBacker:1990]. Passing GWs leaves an imprint in the time of arrival of ultra-stable millisecond pulsars. By cross correlating data from an ensemble of millisecond pulsars (i.e. from a PTA), this signature can be confidently identified [@HellingsDowns:1983]. Because pulsars are timed on weekly basis ($\Delta{t}=1$week) over a period ($T$) of many years (almost 30yr for some of them), PTAs are sensitive to GW in the frequency window $[1/T,1/(2\Delta{t})]\approx [1{\rm nHz},1\mu{\rm Hz}]$.
The European Pulsar Timing Array [EPTA @2016MNRAS.458.3341D] and the Parkes Pulsar Timing Array [PPTA @2016MNRAS.455.1751R] and North American Nanohertz Observatory for Gravitational Waves [NANOGrav @2015ApJ...813...65T] have made considerable advances in increasing the sensitivity of their datasets. And the first data release of the International Pulsar Timing Array [IPTA @VerbiestEtAl_IPTA1stData:2016] is paving the way towards an effective combination of all PTA observation into a dataset that has the potential to detect GWs within the next ten years [@2015MNRAS.451.2417R; @2016ApJ...819L...6T]. Moreover, new powerful telescopes such as the SKA pathfinder MeerKAT in South Africa [@2009arXiv0910.2935B] and the 500-mt FAST in China [@2011IJMPD..20..989N] will be online in the next couple of years, boosting the odds of GW detection with their exquisite timing capabilities.
The frequency spectrum of the overall GW signal is given by the superposition of all sources emitting at a given frequency. Because of the abundance of MBHBs in the Universe this has been generally described as a stochastic GW background (GWB), characterized, in case of circular GW driven binaries by a power-law spectrum $h_c\propto f^{-2/3}$ [@2001astro.ph..8028P]. However, two facts have became clear in the past decade. Firstly, to get to the PTA band, MBHBs need to efficiently interact with their stellar environment, which potentially has a double effect on the shape of the GW spectrum. If at the lower end of the PTA sensitivity window, MBHBs shrink because of interaction with their environment more efficiently than because of GW emission, then the spectrum is attenuated, even showing a potential turnover [@KocsisSesana:2011; @Sesana:2013CQG; @2014MNRAS.442...56R; @2016arXiv160601900K]. Moreover, both scattering of ambient stars and interaction with a circumbinary disk tend to excite the binary eccentricity [@1996NewA....1...35Q; @2005ApJ...634..921A; @2011MNRAS.415.3033R]. This also results in a loss of power at low frequency (eccentric binaries evolve faster and generally emit at higher frequencies), potentially leading to a turnover in the spectrum [@EnokiNagashima:2007; @HuertaEtAl:2015]. Secondly, for $f>10$nHz, the bulk of the signal is provided by sparse massive and/or nearby sources, and cannot be described simply as a stochastic signal. This was first noticed by SVC08, who came to the conclusion that at high frequency the GW signal will be dominated by sparse, individually resolvable sources, leaving behind a stochastic GWB at a level falling below the nominal $f^{-2/3}$ power law.
With the constant improvement of their timing capabilities, PTAs are placing increasingly stringent limits on the amplitude of the expected GWB [@ShannonEtAl_PPTAgwbg:2015; @LentatiEtAl_EPTAgwbg:2015; @ArzoumanianEtAl_NANOGRAV9yrData:2016], and detection is possible within the next decade. One crucial question is then: what astrophysics do we learn from a GWB detection with PTA? This question has been sparsely tackled by a number of authors [see, e.g., @Sesana:2013CQG] but the answers have been mostly qualitative. A full assessment of what we can learn from PTA detection will stem from a combination of all the measurements PTA will be able to make, including: amplitude and shape of the unresolved GW signal, possible non Gaussianity and non-stationarity, statistics and properties of individually resolvable sources. With this long-term goal in mind, a first step is to investigate what information can be retrieved from the [*amplitude and shape*]{} of the GWB.
As part of the common effort of the EPTA collaboration [@2016MNRAS.458.3341D] to detect GWs with pulsar timing, in this paper, we derive the expected spectrum of a GWB for a generic population of eccentric MBHBs evolving in typical stellar environments. Expanding on the work of [@MiddletonEtAl:2016], the goal is to define a model that links the MBHB mass function and eccentricity distribution to the shape of the GWB spectrum. In particular, we find that the astrophysical properties of the MBHBs are reflected in two features of the spectrum. The efficiency of environmental coupling and the MBHB eccentricity might cause a low frequency flattening (or even a turnover) in the spectrum. The shape of the MBHB mass function affects the statistics of bright sources at high frequency, causing a steepening of the unresolved level of the GWB. We develop an efficient (mostly analytical) formalism to generate GW spectra given a minimal number of parameters defining the MBHB mass function, the efficiency of environmental coupling and the eccentricity distribution. In a companion paper we will show how the formalism developed here is suitable to an efficient exploration of the model parameter space, allowing, for the first time, a quantitative estimate of the MBHB population parameters from a putative GWB measurement.
The paper is organized as follows. In Section \[sec:Model\], we derive a versatile and quick analytic approximation to the shape of a GW spectrum produced by eccentric GW driven binaries. In Section \[sec:Coupling\] we study the evolution of eccentric MBHBs in stellar environments with properties constrained by observations of massive spheroids. We derive typical
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: 'We analyze heavy quark free energies in $2$-flavor QCD at finite temperature and the corresponding heavy quark potential at zero temperature. Static quark anti-quark sources in color singlet, octet and color averaged channels are used to probe thermal modifications of the medium. The temperature dependence of the running coupling, $\alpha_{qq}(r,T)$, is analyzed at short and large distances and is compared to zero temperature as well as quenched calculations. In parts we also compare our results to recent findings in $3$-flavor QCD. We find that the characteristic length scale below which the running coupling shows almost no temperature dependence is almost twice as large as the Debye screening radius. Our analysis supports recent findings which suggest that $\chi_c$ and $\psi\prime$ are suppressed already at the (pseudo-) critical temperature and thus give a probe for quark gluon plasma production in heavy ion collision experiments, while $J/\psi$ may survive the transition and will dissolve at higher temperatures.'
author:
- Olaf Kaczmarek
- Felix Zantow
bibliography:
- 'paper.bib'
title: |
Static quark anti-quark interactions in zero and finite temperature QCD.\
I. Heavy quark free energies, running coupling and quarkonium binding
---
Introduction
============
The study of the fundamental forces between quarks and gluons is an essential key to the understanding of QCD and the occurrence of different phases which are expected to show up when going from low to high temperatures ($T$) and/or baryon number densities. For instance, at small or vanishing temperatures quarks and gluons get confined by the strong force while at high temperatures asymptotic freedom suggests a quite different QCD medium consisting of rather weakly coupled quarks and gluons, the so-called quark gluon plasma (QGP) [@PLP]. On quite general grounds it is therefore expected that the interactions get modified by temperature. For the analysis of these modifications of the strong forces the change in free energy due to the presence of a static quark anti-quark pair separated by a distance $r$ in a QCD-like thermal heat bath has often been used since the early work [@McLerran:1980pk; @McLerran:1981pb]. In fact, the static quark anti-quark free energy which is obtained from Polyakov loop correlation functions calculated at finite temperature plays a similar important role in the discussion of properties of the strong force as the static quark potential does at zero temperature.
The properties of this observable (at $T=0$: potential, at $T\neq0$: free energy) at short and intermediate distances ($rT\;\lsim\;1$) is important for the understanding of in-medium modifications of heavy quark bound states. A quantitative analysis of heavy quark free energies becomes of considerable importance for the discussion of possible signals for the quark gluon plasma formation in heavy ion collision experiments [@Matsui:1986dk; @RR]. For instance, recent studies of heavy quarkonium systems within potential models use the quark anti-quark free energy to define an appropriate finite temperature potential which is considered in the non-relativistic Schrödinger equation [@Digal:2001iu; @Digal:2001ue; @Wong:2001kn; @Wong:2001uu]. Such calculations, however, do not quite match the results of direct lattice calculations of the quarkonium dissociation temperatures which have been obtained so far only for the pure gauge theory [@Datta:2003ww; @Asakawa:2003re]. It was pointed out [@Kaczmarek:2002mc] that the free energy ($F$) of a static quark anti-quark pair can be separated into two contributions, the internal energy ($U$) and the entropy ($S$). The separation of the entropy contribution from the free energy, [*i.e.*]{} the variable $U=F+TS$, could define an appropriate effective potential at finite temperature[^1] [@Kaczmarek:2002mc; @Zantow:2003ui], $V_{\text{eff}}(r,T)\equiv
U$, to be used as input in model calculations and might explain in parts the quantitative differences found when comparing solutions of the Schrödinger equation with direct calculations of spectral functions [@Datta:2003ww; @Asakawa:2003re]. First calculations which use the internal energy obtained in our calculations [@Shuryak:2004tx; @Wong:2004kn; @Brown:2004qi; @Park:2005nv] support this expectation. Most of these studies consider so far quenched QCD. Using potentials from the quenched theory, however, will describe the interaction of a heavy quark anti-quark pair in a thermal medium made up of gluons only. It is then important to understand how these results might change for the case of a thermal heat bath which also contains dynamical quarks.
On the other hand, it is the large distance property of the heavy quark interaction which is important for our understanding of the bulk properties of the QCD plasma phase, [*e.g.*]{} the screening property of the quark gluon plasma [@Kaczmarek:1999mm; @Kaczmarek:2004gv], the equation of state [@Beinlich:1997ia; @Karsch:2000ps] and the order parameter (Polyakov loop) [@Kaczmarek:2003ph; @Kaczmarek:2002mc; @Dumitru:2004gd; @Dumitru:2003hp]. In all of these studies deviations from perturbative calculations and the ideal gas behavior are expected and were indeed found at temperatures which are only moderately larger than the deconfinement temperature. This calls for quantitative non-perturbative calculations. Also in this case most of todays discussions of the bulk thermodynamic properties of the QGP and its apparent deviations from the ideal gas behavior rely on results obtained in lattice studies of the pure gauge theory, although several qualitative differences are to be expected when taking into account the influence of dynamical fermions; for instance, the phase transition in full QCD will appear as an crossover rather than a ’true’ phase transition with related singularities in thermodynamic observables. Moreover, in contrast to a steadily increasing confinement interaction in the quenched QCD theory, in full QCD the strong interaction below deconfinement will show a qualitatively different behavior at large quark anti-quark separations. Due to the possibility of pair creation the stringlike interaction between the two test quarks can break leading to a constant potential and/or free energy already at temperatures below deconfinement [@DeTar:1998qa].
Thus it is quite important to extend our recently developed concepts for the analysis of the quark anti-quark free energies and internal energies in pure gauge theory [@Kaczmarek:2002mc; @Kaczmarek:2003dp; @Kaczmarek:2004gv; @Phd] to the more complex case of QCD with dynamical quarks, and to quantify the qualitative differences which will show up between pure gauge theories and QCD.
$\beta$ $T/T_c$ \# conf. $\beta$ $T/T_c$ \# conf.
--------- --------- ---------- --------- --------- ----------
3.52 0.76 2000 3.72 1.16 2000
3.55 0.81 3000 3.75 1.23 1000
3.58 0.87 3500 3.80 1.36 1000
3.60 0.90 2000 3.85 1.50 1000
3.63 0.96 3000 3.90 1.65 1000
3.65 1.00 4000 3.95 1.81 1000
3.66 1.02 4000 4.00 1.98 4000
3.68 1.07 3600 4.43 4.01 1600
3.70 1.11 2000
: Sample sizes at each $\beta$ value and the temperature in units of the (pseudo-) critical temperature $T_c$.
\[tab:configs\]
For our study of the strong interaction in terms of the quark anti-quark free energies in full QCD lattice configurations were generated for $2$-flavor QCD ($N_f$=2) on $16^3\times 4$ lattices with bare quark mass $ma$=0.1, [*i.e.*]{} $m/T$=0.4, corresponding to a ratio of pion to rho masses ($m_{\pi}/m_{\rho}$) at the (pseudo-) critical temperature of about $0.7$ ($a$ denotes the lattice spacing) [@Karsch:2000kv]. We have used Symanzik improved gauge and p4-improved staggered fermion actions. This combination of lattice actions is known to reduce the lattice cut-off effects in Polyakov loop correlation functions at small quark anti-quark separations seen as an improved restoration of the broken rotational symmetry. For any further details of the simulations with these actions see [@Allton:2002zi; @Allton:2003vx]. In Table \[tab:configs\] we summarize our simulation parameters, [*i.e.*]{} the lattice coupling $\beta$, the temperature $T/T_c$ in units of the pseudo critical temperature and the number of configurations used at each $\beta$-value. The pseudo critical coupling for this action is $\beta_c=3.649(2)$ [@Allton:2002zi]. To set the physical scale we use the string tension, $\sigma a^2$, measured in units of the lattice spacing, obtained from the large distance behavior of the heavy quark potential calculated from smeared Wilson loops at zero temperature [@Karsch:2000kv]. This is also
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: 'Solid $^4$He has been created off the melting curve by growth at nearly constant mass via the “blocked capillary" technique and growth from the $^4$He superfluid at constant temperature. The experimental apparatus allows injection of $^4$He atoms from superfluid directly into the solid. Evidence for the superfluid-like transport of mass through a sample cell filled with hcp solid $^4$He off the melting curve is found. This mass flux depends on temperature and pressure.'
author:
- 'M. W. Ray and R. B. Hallock'
title: Observation of Unusual Mass Transport in Solid hcp $^4$He
---
Experiments by Kim and Chan[@Kim2004a; @Kim2004b; @Kim2005; @Kim2006], who studied the behavior of a torsional oscillator filled with hcp solid $^4$He, showed a clear reduction in the period of the oscillator as a function of temperature at temperatures below T $\approx$ 250 mK. This observation was interpreted as evidence for the presence of “supersolid" behavior in hcp solid $^4$He. Subsequent work in a number of laboratories has confirmed the observation of a period shift, with the interpretation of mass decoupling in most cases in the 0.05 - 1 percent range, but with dramatically larger decoupling seen in quench-frozen samples in small geometries[@Rittner2007]. Aoki et al.[@Aoki2007] observed sample history dependence under some conditions. These observations and interpretations, among others, have kindled considerable interest and debate concerning solid hcp $^4$He.
Early measurements by Greywall[@Greywall1977], showed no evidence for mass flow in solid helium. Work by the Beamish group also showed no evidence for mass flow in two sets of experiments involving Vycor[@Day2005] and narrow channels[@Day2006]. Sasaki et al.[@Sasaki2006] attempted to cause flow through solid helium on the melting curve, using a technique similar to that used by Bonfait et al.[@Bonfait1989] (that showed no flow). Initial interpretations suggested that flow might be taking place through the solid[@Sasaki2006], but subsequent measurements have been interpreted to conclude that the flow was instead likely carried by small liquid regions at the interface between crystal faces and the surface of the sample cell[@Sasaki2007], which were shown to be present for helium on the melting curve. Recent work by Day and Beamish[@Day2007] showed that the shear modulus of hcp solid $^4$He increased at low temperature and demonstrated a temperature and $^3$He impurity dependence very similar to that shown by the torsional oscillator results. The theoretical situation is also complex, with clear analytic predictions that a supersolid cannot exist without vacancies (or interstitials)[@Prokofev2005], numerical predictions that no vacancies exist in the ground state of hcp solid $^4$He[@Boninsegni2006; @Clark2006; @Boninsegni2006a], and [*ab initio*]{} simulations that predict that in the presence of disorder the solid can demonstrate superflow[@Boninsegni2006; @Pollet2007; @Boninsegni2007] along imperfections. But, there are alternate points of view[@Anderson2007]. There has been no clear experimental evidence presented for the flow of atoms through solid hcp $^4$He.
We have created a new approach, related to our “sandwich"[@Svistunov2006] design, with an important modification. The motivation was to attempt to study hcp solid $^4$He at pressures off the melting curve in a way that would allow a chemical potential gradient to be applied across the solid, but not by squeezing the hcp solid lattice directly. Rather, the idea is to inject helium atoms into the solid from the superfluid. To do this off the melting curve presents rather substantial experimental problems due to the high thermal conductivity of bulk superfluid helium. But, helium in the pores of Vycor, or other small pore geometries, is known to freeze at much higher pressures than does bulk helium[@Beamish1983; @Adams1987; @Lie-zhao1986]. Thus, the “sandwich" consists of solid helium held between two Vycor plugs, each containing superfluid $^4$He.
The schematic design of our experiment is shown in figure 1. Three fill lines lead to the copper cell; two from room temperature, with no heat sink below 4K, enter via liquid reservoirs, R1, R2, atop the Vycor (1 and 2) and a third (3) is heat sunk at 1K and leads directly to the cell, bypassing the Vycor. The concept of the measurement is straightforward: (a) Create a solid sample Shcp and then (b) inject atoms into the solid Shcp by feeding atoms via line 1 or 2. So, for example, we increase the pressure on line 1 or 2 and observe whether there is a change in the pressure on the other line. We also have capacitive pressure gauges on the sample cell, C1 and C2, and can measure the pressure [*in situ*]{}. To conduct the experiment it is important that the helium in the Vycor, the liquid reservoirs atop the Vycor, and the lines that feed the Vycor contain $^4$He that does not solidify. This is accomplished by imposing a temperature gradient between R and Shcp across the Vycor, a gradient which would present insurmountable difficulties if the Vycor were not present. While the heat conducted down the Vycor rods in our current apparatus is larger than we expected, and this presently limits our lowest achievable temperature, we have none the less obtained interesting results.
To study the flow characteristics of our Vycor rods, we measured the relaxation of pressure differences between line 1 and line 2 with superfluid $^4$He in the cell at $\sim$ 20 bar at 400 mK, with the tops of the Vycor rods in the range 1.7 $<$ T$_1$ = T$_2$ $<$ 2.0 K, temperatures similar to some of our measurements at higher pressures with solid helium in the sample cell. The relaxation was linear in time as might be expected for flow through a superleak at critical velocity. The pressure recorded by the capacitive gauges shifted as it should. An offset in the various pressure readings if T$_1$ $\ne$ T$_2$ was present due to a predictable fountain effect across the two Vycor superleaks. Our Vycor rods readily allow a flux of helium atoms, even for T$_1$, T$_2$ as high as 2.8K.
To study solid helium, one approach is to grow from the superfluid phase (using ultra-high purity helium, assumed to have $\sim$ 300 ppb $^3$He). With the cell at T $\approx$ 400 mK, we added helium to lines 1 and 2 to increase the pressure from below the melting curve to $\approx$ 26.8 bar. Sample A grew in a few hours and was held stable for about a day before we attempted measurements on it. Then the pressure to line 1, P1, was changed abruptly from 27.1 to 28.6 bar (figure 2). There resulted a gradual decrease in the pressure in line 1 and a corresponding increase of the pressure in line 2. Note that pressure can increase in line 2 only if atoms move from line 1 to line 2, through the region of the cell occupied by solid helium, Shcp. We also observed a change in the pressure recorded on the capacitive pressure gauges on the cell, e.g. C1 (C1 and C2 typically agree). As these pressure changes evolved, we hoped to see the pressure in line 1 and line 2 converge, but the refrigerator stopped after 20 hours of operation on this particular run. Note that the change in P2 is rather linear (0.017 bar/hr) and does not show the sort of non-linear change with time that one would expect for the flow of a viscous fluid. Our conclusion is that helium has moved through the region of hcp solid $^4$He, while the solid was off the melting curve, and that this flow from line 1 to line 2 was at a limiting velocity, consistent with superflow. From the behavior of the pressure gauges on the cell, it is clear that atoms were also added to the solid.
We next grew a new solid sample, B, again by growth from the superfluid, but we grew it at a faster rate and did not dwell for a day prior to measurements. This sample also demonstrated flow, with the pressure difference relaxing over about 5 hours after we stopped adding atoms to line 1. The pressure step applied to line 1 was from 26.4 to 28.0 bar. While $^4$He was slowly added to line 1, P2 increased. After the addition of atoms was stopped, the change in these pressures appeared to depend on P1-P2, with P2 showing curvature and regions of predominantly $\sim$ 0.076 and $\sim$ 0.029 bar/hr. Next, we used the same solid sample and moved it closer to the melting curve (1.25 K), but maintained it as a solid, sample C. We applied a pressure difference by increasing the pressure to line 1 from 26.0 to 28.4 bar, but in this case there was no increase in P2; the pressure difference P1-P2 appeared nearly constant, with a slight increase in pressure recorded in the cell. It is possible that this difference in behavior is an annealing effect, but it may also be due to a reduced ability to flow through the same number of conducting pathways. Next, after a warm up to room temperature, we prepared another sample, G, with
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: 'This paper studies vector quantile regression (VQR), which is a way to model the dependence of a random vector of interest with respect to a vector of explanatory variables so to capture the whole conditional distribution, and not only the conditional mean. The problem of vector quantile regression is formulated as an optimal transport problem subject to an additional mean-independence condition. This paper provides a new set of results on VQR beyond the case with correct specification which had been the focus of previous work. First, we show that even under misspecification, the VQR problem still has a solution which provides a general representation of the conditional dependence between random vectors. Second, we provide a detailed comparison with the classical approach of Koenker and Bassett in the case when the dependent variable is univariate and we show that in that case, VQR is equivalent to classical quantile regression with an additional monotonicity constraint.'
author:
- 'G. Carlier[^1], V. Chernozhukov [^2], A. Galichon [^3]'
title: Vector quantile regression beyond correct specification
---
**Keywords:** vector quantile regression, optimal transport, duality.
Introduction {#intro}
============
Vector quantile regression was recently introduced in [@ccg] in order to generalize the technique of quantile regression when the dependent random variable is multivariate. Quantile regression, pioneered by Koenker and Bassett [@kb], provides a powerful way to study dependence between random variables assuming a linear form for the quantile of the endogenous variable $Y$ given the explanatory variables $X$. It has therefore become a very popular tool in many areas of economics, program evaluation, biometrics, etc. However, a well-known limitation of the approach is that $Y$ should be scalar so that its quantile map is defined. When $Y$ is multivariate, there is no canonical notion of quantile, and the picture is less clear than in the univariate case[^4]. The approach proposed in [@ccg] is based on optimal transport ideas and can be described as follows. For a random vector vector $Y$ taking values in ${{\bf}{R}}^{d}$, we look for a random vector $U$ uniformly distributed on the unit cube $[0,1]^{d}$ and which is maximally correlated to $Y$, finding such a $U$ is an optimal transport problem. A celebrated result of Brenier [@brenier] implies that such an optimal $U$ is characterized by the existence of a convex function $\varphi $ such that $Y=\nabla \varphi (U)$. When $d=1$, of course, the optimal transport map of Brenier $\nabla \varphi
=Q$ is the quantile of $Y$ and in higher dimensions, it still has one of the main properties of univariate quantiles, namely monotonicity. Thus Brenier’s map $\nabla \varphi $ is a natural candidate to be considered as the vector quantile of $Y$, and one advantage of such an approach is the pointwise relation $Y=\nabla \varphi (U)$ where $U$ is a uniformly distributed random vector which best approximates $Y$ in $L^{2}$.
If, in addition, we are given another random vector $X$ capturing a set of observable explanatory variables, we wish to have a tractable method to estimate the conditional quantile of $Y$ given $X=x$, that is the map $u\in
\lbrack 0,1]^{d}\mapsto Q(x,u)\in {{\bf}{R}}^{d}$. In the univariate case $d=1$, and if the conditional quantile is affine in $x$ i.e. $Q(x,u)=\alpha
(u)+\beta (u)x$, the quantile regression method of Koenker and Bassett gives a constructive and powerful linear programming approach to compute the coefficients $\alpha (t)$ and $\beta (t)$ for any fixed $t\in \lbrack 0,1]$, dual to the linear programming problem: $$\sup_{(U_{t})}\{{{\bf}{E}}(U_{t}Y)\;:\;U_{t}\in \lbrack 0,1],{{\bf}{E}}(U_{t})=(1-t),\;{{\bf}{E}}(XU_{t})={{\bf}{E}}(X)\}. \label{kobas}$$Under correct specification, i.e. when the true conditional quantile is affine in $x$, this variational approach estimates the true coefficients $\alpha (t)$ and $\beta (t)$. In [@ccg], we have shown that in the multivariate case as well, when the true vector quantile is affine in $x$, one may estimate it by a variational problem which consists in finding the uniformly distributed random variable $U$ such that ${{\bf}{E}}(X|U)={{\bf}{E}}(X)$ (mean independence) and maximally correlated with $Y$.
The purpose of the present paper is to understand what these variational approaches tell about the dependence between $Y$ and $X$ in the general case i.e. without assuming any particular form for the conditional quantile. Our main results are the following:
- **A general representation of dependence:** we will characterize the solution of the optimal transport problem with a mean-independence constraint from [@ccg] and relate it to a relaxed form of vector quantile regression. To be more precise, our theorem \[qrasfoc\] below will provide the following general representation of the distribution of $\left( X,Y\right) $: $$\begin{split}
Y& \in \partial \Phi _{X}^{\ast \ast }(U)\mbox{ with $X\mapsto \Phi_X(U)$
affine}, \\
& \Phi _{X}(U)=\Phi _{X}^{\ast \ast }(U)\mbox{ almost surely,} \\
& \mbox{ $U$ uniformly distributed on $[0,1]^d$},\;{{\bf}{E}}(X|U)={{\bf}{E}}(X),
\end{split}$$where $\Phi _{x}^{\ast \ast }$ denotes the convex envelope of $u\rightarrow
\Phi _{x}\left( u\right) $ for a fixed $x$, and $\partial $ denotes the subdifferential. The main ingredients are convex duality and an existence theorem for optimal dual variables. The latter is a non-trivial extension of Kantorovich duality: indeed, the existence of a Lagrange multiplier associated to the mean-independence constraint is not straightforward and we shall prove it thanks to Komlos’ theorem (theorem \[existdual\]). Vector quantile regression is *under correct specification* if $\Phi _{x}\left( u\right) $ is convex for all $x$ in the support, in which case one can write $$\begin{split}
Y& =\nabla \Phi _{X}(U)\mbox{ with $\Phi_X(.)$ convex, $X\mapsto \Phi_X(U)$
affine}, \\
& \mbox{ $U$ uniformly distributed on $[0,1]^d$},\;{{\bf}{E}}(X|U)={{\bf}{E}}(X).
\end{split}$$While our previous paper [@ccg] focused on the case with correct specification, the results we obtain in the present paper are general.
- **A precise link with classical quantile regression in the univariate case:** it was shown in [@ccg] that in the particular case when $d=1$ and under correct specification, classical quantile regression and vector quantile regression are equivalent. Going beyond correct specification here, we shall see that the optimal transport approach is equivalent (theorem \[equivkb\]) to a variant of (\[kobas\]) where one further imposes the monotonicity constraint that $t\mapsto U_{t}$ is nonincreasing (which is consistent with the fact that the true quantile $Q(x,t)$ is nondecreasing with respect to $t$).
The paper is organized as follows. In section \[mvquant\], introduces vector quantiles through optimal transport. Section \[mvqr\] is devoted to a precise, duality based, analysis of the vector quantile regression beyond correct specification. Finally, we shall revisit in section \[univar\] the univariate case and then carefully relate the Koenker and Bassett approach to that of [@ccg].
Vector quantiles and optimal transport {#mvquant}
======================================
Let $(\Omega ,{\mathcal{F}},{\bf}{P})$ be some nonatomic probability space, and let $\left( X,Y\right) $ be a random vector, where the vector of explanatory variables $X$ is valued in ${{\bf}{R}}^{N}$ and the vector of dependent variables $Y$ is valued in ${{\bf}{R}}^{d}$.
Vector quantiles by correlation maximization {#mvquant1}
--------------------------------------------
The notion of vector quantile was recently introduced by Ekeland, Galichon and Henry [@egh], Galichon and Henry [@gh] and was used in the framework of quantile regression in our companion paper [@ccg]. The starting point for this approach is the correlation maximization problem $$\max \{{{\bf}{E}}(V\cdot Y),\;\mathop{\mathrm{Law}}\nolimits(V)=\mu \}
\label{otmd}$$where $\mu :=\mathop{\mathrm{uniform}}\nolimits([0,1]^{d})$ is the uniform measure on the unit $d$-dimensional cube $[0,1]^{d}$. This problem is equivalent to the optimal transport problem which consists in minimizing ${{\bf}{E}}(|Y-V|^{2})$ among uniformly distributed random vectors $V$. As shown in the
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: 'Disk scale length and central surface brightness $\mu_0$ for a sample of 29955 bright disk galaxies from the Sloan Digital Sky Survey have been analysed. Cross correlation of the SDSS sample with the LEDA catalogue allowed us to investigate the variation of the scale lengths for different types of disk/spiral galaxies and present distributions and typical trends of scale lengths all the SDSS bands with linear relations that indicate the relation that connect scale lengths in one passband to another. We use the volume corrected results in the $r$-band and revisit the relation between these parameters and the galaxy morphology, and find the average values $\langle r_d\rangle = 3.8\pm 2.1$ kpc and $\langle\mu_0\rangle=20.2\pm 0.7$ mag arcsec$^{-2}$. The derived scale lengths presented here are representative for a typical galaxy mass of $10^{10.8} \rm{~M}_\odot$, and the RMS dispersion is larger for more massive galaxies. We analyse the –$\mu_0$ plane and further investigate the Freeman Law and confirm that it indeed defines an upper limit for $\mu_0$ in bright disks ($r_\mathrm{mag}<17.0$), and that disks in late type spirals ($T \ge 6$) have fainter central surface brightness. Our results are based on a sample of galaxies in the local universe ($z< 0.3$) that is two orders of magnitudes larger than any sample previously studied, and deliver statistically significant results that provide a comprehensive test bed for future theoretical studies and numerical simulations of galaxy formation and evolution.'
---
Overview
========
The mass distribution of a disk is set by the and in the exponential case, 60% of the total mass is confined within two scale lengths and 90% within four scale lengths. Moreover, the angular momentum of a disk is set by and the mass distribution of its host halo, and the fact that the angular momentum vectors are aligned suggests that there is a physical relation between the two. During the formation process, mergers and associated star formation and feedback processes play a crucial role in the resulting structure, however, the observed sizes of disks suggest that the combination of these physical processes yield that galactic disks have not lost much of the original angular momentum acquired from cosmological torques (White & Rees 1978). A large disk forms when the disk mass is smaller than the halo mass over the disk region, and vice versa, a small disk forms when the mass of the disk dominates the mass of the halo in any part of the disk. The self gravitating disk will also modify the shape of the rotation curve near the centre of a galaxy and the disk is then set to undergo secular evolution. The natural implication of this scenario is that the dictates the life of a disk, and consequently, is a prime factor which determines the position of a galaxy on the Hubble sequence.
Here we analyse the and $\mu_0$ from an unprecedentedly large sample of bright disk galaxies in the nearby universe ($z< 0.3$) using the Sloan Digital Sky Survey (SDSS) Data Release 6 (York et al. 2000; Adelman-McCarthy et al. 2008). We have used the Virtual Observatory tools and services to retrieve data in all ($u$, $g$, $r$, $i$, and $z$) SDSS band and used the LEDA catalogue (Paturel et al. 2003) to retrieve morphological classification information about our sample galaxies, and those with types defined as Sa or later are hereafter refereed to as disk galaxies. In the $g$, $i$, and $z$-band, $\approx 27000$–30000 galaxies were analysed, and in the $u$-band, and $\mu_0$ were robustly derived for a few hundred objects. Throughout this presentation, we use disk parameters in the $r$-band to provide a comprehensive test bed for forthcoming cosmological simulations (or analytic/semi-analytic models) of galaxy formation and evolution. Further details have been presented in Fathi et al. (2010) and Fathi (2010).
One prominent indicator for a smooth transition from spiral toward S0 and disky ellipticals is provided by the –$\mu_0$ diagram where $\mu_0$ is the central surface brightness of the disk, where spirals and S0s are mixed and disky ellipticals populate the upper left corner of this diagram. Another instructive relation is the Freeman Law (Freeman 1970) which relates $\mu_0$ to the galaxy morphological type. Although, some studies have found that the Freeman Law is an artefact due to selection effects (e.g., Disney et al. 1976), recent work have shown that proper consideration of selection effects can be combined with kinematic studies to explore an evolutionary sequence. In the comparison between theory and observations, two issues complicate matters. On the theory side mapping between initial halo angular momentum and is not trivial, partly due to the fact that commonly the initial specific angular momentum distribution of the visible and dark component favour disks which are more centrally concentrated disks than exponential. Observationally, comprehensive samples have yet not been studied, and the mixture of different species such as low and high surface brightness galaxies complicate the measurements of disk parameters.
{width=".69\textwidth"}
{width=".99\textwidth"}
Freeman Law and –$\mu_0$ Plane
==============================
The Freeman Law defines an upper limit for $\mu_0$ and is hereby confirmed by our analysis of the largest sample ever studied in this context (see Fig. \[fig:mu0rd\]). However, disk galaxies with morphological type $T\ge6$ have fainter $\mu_0$. These results in $r$-band are comparable with those in other SDSS bands (Fathi 2010). Combined with our previous results, i.e. that varies by two orders of magnitude independent of morphological type, this result implies that disks with large scale lengths, not necessarily have higher $\mu_0$.
The $\mu_0$ has a Gaussian distribution with $\langle\mu_0\rangle=20.2\pm0.7$ mag arcsec$^{-2}$ with a linear trend seen in Fig. \[fig:mu0rd\] (applying different internal extinction parameters changes this mean value by 0.2 mag arcsec$^{-2}$). The top right corner is enclosed by the constant disk luminosity line, void of objects. The top right corner is also the region where the disk luminosity exceeds $3L^\star$, thus the absence of galaxies in this region cannot be a selection effect since big bright galaxies cannot be missed in our diameter selected sample. However, it is clear that selection effect plays a role in populating the lower left corner of this diagram. Analogue to the –$\mu_0$ plane, the Tully-Fisher relation implies lines of constant maximum speed a disk can reach.
Our 282 well-classified galaxies (illustrated with coloured dots in Fig. \[fig:mu0rd\]) follow the results of, e.g., Graham and de Blok (2001), and confirm that disks of intermediate and early type spirals have higher $\mu_0$ while the late type spirals have lower $\mu_0$, and they populate the lower left corner of the diagram. Intermediate morphologies are mixed along a linear slope of 2.5 in the –$\mu_0$ plane, coinciding with the region populated by S0s as shown by Kent (1985) and disky ellipticals shown by Scorza & Bender (1995) The , on the other hand, does not vary as a function of morphological type (Fathi et al. 2010). Investigating galaxy masses, we find a forth quantity is equally important in this analysis. The total galaxy mass separates the data along lines parallel to the dashed lines drawn in Fig. \[fig:mu0rd\]. This is indeed also confirmed by the Tully-Fisher relation. Moreover, we validate that the lower mass galaxies are those with type $\ge 6$.
Investigation of the asymmetry and concentration in this context further confirms the expected trends, i.e. that these parameters increase for later types, and central stellar velocity dispersion decrease for later type spiral galaxies, however, we note that these correlations are well below one-sigma confidence level. However, the higher asymmetry galaxies populate a region more extended toward the bottom right corner with respect to the high asymmetry galaxies. The middle panel shows an opposite trend, and the bottom panel shows that larger velocity dispersion has the same effect as asymmetry (see Fathi 2010 for further details).
In the two relations analysed here, we find typically larger scatter than previous analyses, and although our sample represents bright disks, the sample size adds credibility to our findings. These results are fully consistent with the common understanding of the –$\mu_0$ plane and the Freeman Law, and they contribute to past results since they are based on a sample which is two order of magnitudes greater than any previous study, with more than five times more late type spiral galaxies than any previous analysis.\
[*Acknowledgements:* ]{} I thank the IAU, LOC and my colleagues i the SOC for a stimulating symposium, and Mark Allen, Evanthia Hatziminaoglou, Thomas Boch, Reynier Peletier and Michael Gatchell for their invaluable input at various stages of this project.
Adelman-McCarthy, J. K. et al. 2008, ApJS, 175, 297 Disney, M. 1976, Nature, 263, 573 Graham, A. W., de Blok, W. 2001, ApJ, 556, L177 Fathi,
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: 'Mesh is an important and powerful type of data for 3D shapes and widely studied in the field of computer vision and computer graphics. Regarding the task of 3D shape representation, there have been extensive research efforts concentrating on how to represent 3D shapes well using volumetric grid, multi-view and point cloud. However, there is little effort on using mesh data in recent years, due to the complexity and irregularity of mesh data. In this paper, we propose a mesh neural network, named MeshNet, to learn 3D shape representation from mesh data. In this method, face-unit and feature splitting are introduced, and a general architecture with available and effective blocks are proposed. In this way, MeshNet is able to solve the complexity and irregularity problem of mesh and conduct 3D shape representation well. We have applied the proposed MeshNet method in the applications of 3D shape classification and retrieval. Experimental results and comparisons with the state-of-the-art methods demonstrate that the proposed MeshNet can achieve satisfying 3D shape classification and retrieval performance, which indicates the effectiveness of the proposed method on 3D shape representation.'
author:
- |
Yutong Feng,^1^ Yifan Feng,^2^ Haoxuan You,^1^ Xibin Zhao^1^[^1], Yue Gao^1^\
^1^BNRist, KLISS, School of Software, Tsinghua University, China.\
^2^School of Information Science and Engineering, Xiamen University\
{feng-yt15, zxb, gaoyue}@tsinghua.edu.cn, {evanfeng97, haoxuanyou}@gmail.com\
title: 'MeshNet: Mesh Neural Network for 3D Shape Representation'
---
Introduction
============
Three-dimensional (3D) shape representation is one of the most fundamental topics in the field of computer vision and computer graphics. In recent years, with the increasing applications in 3D shapes, extensive efforts [@wu20153d; @chang2015shapenet] have been concentrated on 3D shape representation and proposed methods are successfully applied for different tasks, such as classification and retrieval.
For 3D shapes, there are several popular types of data, including volumetric grid, multi-view, point cloud and mesh. With the success of deep learning methods in computer vision, many neural network methods have been introduced to conduct 3D shape representation using volumetric grid [@wu20153d; @maturana2015voxnet], multi-view [@su2015multi] and point cloud [@qi2017pointnet]. PointNet [@qi2017pointnet] proposes to learn on point cloud directly and solves the disorder problem with per-point Multi-Layer-Perceptron (MLP) and a symmetry function. As shown in Figure 1, although there have been recent successful methods using the types of volumetric grid, multi-view and point cloud, for the mesh data, there are only early methods using handcraft features directly, such as the Spherical Harmonic descriptor (SPH) [@kazhdan2003rotation], which limits the applications of mesh data.
![**The developing history of 3D shape representation using different types of data.** The X-axis indicates the proposed time of each method, and the Y-axis indicates the classification accuracy.[]{data-label="fig:intro"}](history2.pdf){width="3.6in"}
{width="6.5in"}
Mesh data of 3D shapes is a collection of vertices, edges and faces, which is dominantly used in computer graphics for rendering and storing 3D models. Mesh data has the properties of complexity and irregularity. The complexity problem is that mesh consists of multiple elements, and different types of connections may be defined among them. The irregularity is another challenge for mesh data processing, which indicates that the number of elements in mesh may vary dramatically among 3D shapes, and permutations of them are arbitrary. In spite of these problems, mesh has stronger ability for 3D shape description than other types of data. Under such circumstances, how to effectively represent 3D shapes using mesh data is an urgent and challenging task.
In this paper, we present a mesh neural network, named MeshNet, that learns on mesh data directly for 3D shape representation. To deal with the challenges in mesh data processing, the faces are regarded as the unit and connections between faces sharing common edges are defined, which enables us to solve the complexity and irregularity problem with per-face processes and a symmetry function. Moreover, the feature of faces is split into spatial and structural features. Based on these ideas, we design the network architecture, with two blocks named spatial and structural descriptors for learning the initial features, and a mesh convolution block for aggregating neighboring features. In this way, the proposed method is able to solve the complexity and irregularity problem of mesh and represent 3D shapes well.
We apply our MeshNet method in the tasks of 3D shape classification and retrieval on the ModelNet40 [@wu20153d] dataset. And the experimental results show that MeshNet achieve significant improvement on 3D shape classification and retrieval using mesh data and comparable performance with recent methods using other types of 3D data.
The key contributions of our work are as follows:
- We propose a neural network using mesh for 3D shape representation and design blocks for capturing and aggregating features of polygon faces in 3D shapes.
- We conduct extensive experiments to evaluate the performance of the proposed method, and the experimental results show that the proposed method performs well on the 3D shape classification and retrieval task.
Related Work
============
Mesh Feature Extraction
-----------------------
There are plenty of handcraft descriptors that extract features from mesh. @lien1984symbolic calculate moments of each tetrahedron in mesh [@lien1984symbolic], and @zhang2001efficient develop more functions applied to each triangle and add all the resulting values as features [@zhang2001efficient]. @hubeli2001multiresolution extend the features of surfaces to a multiresolution setting to solve the unstructured problem of mesh data [@hubeli2001multiresolution]. In SPH [@kazhdan2003rotation], a rotation invariant representation is presented with existing orientation dependent descriptors. Mesh difference of Gaussians (DOG) introduces the Gaussian filtering to shape functions.[@zaharescu2009surface] Intrinsic shape context (ISC) descriptor [@kokkinos2012intrinsic] develops a generalization to surfaces and solves the problem of orientational ambiguity.
Deep Learning Methods for 3D Shape Representation
-------------------------------------------------
With the construction of large-scale 3D model datasets, numerous deep descriptors of 3D shapes are proposed. Based on different types of data, these methods can be categorized into four types.
*Voxel-based method.* 3DShapeNets [@wu20153d] and VoxNet [@maturana2015voxnet] propose to learn on volumetric grids, which partition the space into regular cubes. However, they introduce extra computation cost due to the sparsity of data, which restricts them to be applied on more complex data. Field probing neural networks (FPNN) [@li2016fpnn], Vote3D [@wang2015voting] and Octree-based convolutional neural network (OCNN) [@wang2017cnn] address the sparsity problem, while they are still restricted with input getting larger.
*View-based method.* Using 2D images of 3D shapes to represent them is proposed by Multi-view convolutional neural networks (MVCNN) [@su2015multi], which aggregates 2D views from a loop around the object and applies 2D deep learning framework to them. Group-view convolutional neural networks (GVCNN) [@feng2018gvcnn] proposes a hierarchical framework, which divides views into different groups with different weights to generate a more discriminative descriptor for a 3D shape. This type of method also expensively adds the computation cost and is hard to be applied for tasks in larger scenes.
*Point-based method.* Due to the irregularity of data, point cloud is not suitable for previous frameworks. PointNet [@qi2017pointnet++] solves this problem with per-point processes and a symmetry function, while it ignores the local information of points. PointNet++ [@qi2017pointnet++] adds aggregation with neighbors to solve this problem. Self-organizing network (SO-Net) [@li2018so], kernel correlation network (KCNet) [@shen2018mining] and PointSIFT [@jiang2018pointsift] develop more detailed approaches for capturing local structures with nearest neighbors. Kd-Net [@klokov2017escape] proposes another approach to solve the irregularity problem using k-d tree.
*Fusion method.* These methods learn on multiple types of data and fusion the features of them together. FusionNet [@hegde2016fusionnet] uses the volumetric grid and multi-view for classification. Point-view network (PVNet) [@you2018pvnet] proposes the embedding attention fusion to exploit both point cloud data and multi-view data.
Method
======
In this block, we present the design of MeshNet. Firstly, we analyze the properties of mesh, propose the methods for designing network and reorganize the input data. We then introduce the overall architecture of MeshNet and some blocks for capturing features of faces and aggregating them with neighbor information, which are then discussed in detail.
Overall Design of MeshNet
-------------------------
We first introduce the mesh data and analyze its properties. Mesh data of 3D shapes is a collection of vertices
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: 'We investigate the driven quantum phase transition between oscillating motion and the classical nearly free rotations of the Josephson pendulum coupled to a harmonic oscillator in the presence of dissipation. This model describes the standard setup of circuit quantum electrodynamics, where typically a transmon device is embedded in a superconducting cavity. We find that by treating the system quantum mechanically this transition occurs at higher drive powers than expected from an all-classical treatment, which is a consequence of the quasiperiodicity originating in the discrete energy spectrum of the bound states. We calculate the photon number in the resonator and show that its dependence on the drive power is nonlinear. In addition, the resulting multi-photon blockade phenomenon is sensitive to the truncation of the number of states in the transmon, which limits the applicability of the standard Jaynes–Cummings model as an approximation for the pendulum-oscillator system. compare two different approaches to dissipation, namely the Floquet–Born–Markov and the Lindblad formalisms.'
author:
- 'I. Pietikäinen$^1$'
- 'J. Tuorila$^{1,2}$'
- 'D. S. Golubev$^2$'
- 'G. S. Paraoanu$^2$'
bibliography:
- 'nonlinear\_bib.bib'
title: 'Photon blockade and the quantum-to-classical transition in the driven-dissipative Josephson pendulum coupled to a resonator'
---
Introduction
============
The pendulum, which can be seen as a rigid rotor in a gravitational potential [@baker2005], is a quintessential nonlinear system. It has two extreme dynamical regimes: the low-energy regime, where it can be approximated as a weakly anharmonic oscillator, and the high-energy regime, where it behaves as a free rotor. Most notably, the pendulum physics appears in systems governed by the Josephson effect, where the Josephson energy is analogous to the gravitational energy, and the role of the momentum is taken by the imbalance in the number of particles due to tunneling across the weak link. Such a system is typically referred to as a Josephson pendulum.
In ultracold degenerate atomic gases, several realizations of the Josephson pendulum have been studied [@Leggett2001; @paraoanu2001; @Smerzi1997; @Marino1999]. While the superfluid-fermion case [@Paraoanu2002; @Heikkinen2010] still awaits experimental realization, the bosonic-gas version has been already demonstrated [@Albiez2005; @Levy2007]. Also in this case two regimes have been identified: small Josephson oscillations, corresponding to the low-energy limit case described here, and the macroscopic self-trapping regime [@Smerzi1997; @Marino1999], corresponding to the free-rotor situation. Another example is an oscillating $LC$ electrical circuit as a tunnel barrier between two superconducting leads. This is the case of the transmon circuit [@koch2007], which is currently one of the most promising approaches to quantum processing of information, with high-fidelity operations and good prospects for scalability. Its two lowest eigenstates are close to those of a harmonic oscillator, with only weak perturbations caused by the anharmonicity of the potential. The weak anharmonicity also guarantees that the lowest states of the transmon are immune to charge noise, which is a major source of decoherence in superconducting quantum circuits.
In this paper we consider a paradigmatic model which arises when the Josephson pendulum is interacting with a resonator. Circuit quantum electrodynamics offers a rigorous embodyment of the above model as a transmon device coupled to a superconducting resonator - fabricated either as a three-dimensional cavity or as a coplanar waveguide segment. In this realization, the system is driven by an external field of variable frequency, and dissipation affects both the transmon and the resonator.
We study in detail the onset of nonlinearity in the driven-dissipative phase transition between the quantum and the classical regimes. We further compare the photon number in detail with the corresponding transmon occupation, and demonstrate that the onset of nonlinearities is accompanied by the excitation of all bound states of the transmon and, thus, it is sensitive to the transmon truncation. We also find that the onset of the nonlinearities is sensitive to the energy level structure of the transmon, [*e.g.*]{} on the gate charge which affects the eigenenergies near and outside the edge of the transmon potential. The results also show that the full classical treatment is justified only in the high-amplitude regime, yielding significant discrepancies in the low-amplitude regime - where the phenomenology is governed by photon blockade. This means that the system undergoes a genuine quantum-to-classical phase transition. our numerical simulations demonstrate that the multi-photon blockade phenomenon is qualitatively different for a realistic multilevel anharmonic system compared to the Jaynes–Cummings case studied extensively in the literature.
namely the conventional Lindblad master equation and the Floquet–Born–Markov master equation, which is developed especially to capture the effects of the drive on the dissipation. We show that both yield relatively close results. However, we emphasize that the Floquet–Born–Markov approach should be preferred because its numerical implementation is considerably more efficient than that of the corresponding Lindblad equation. While our motivation is to elucidate fundamental physics, in the burgeoning field of quantum technologies several applications of our results can be envisioned. For example, the single-photon blockade can be employed to realize single-photon sources, and the two-photon blockade can be utilized to produce transistors controlled by a single photon and filters that yield correlated two-photon outputs from an input of random photons [@Kubanek2008]. In the field of quantum simulations, the Jaynes–Cummings model can be mapped the Dirac electron in an electromagnetic field, with the coupling and the drive amplitude corresponding respectively to the magnetic and electric field: the photon blockade regime is associated with a discrete spectrum of the Dirac equation, while the breakdown of the blockade corresponds to a continuous spectrum [@Gutierrez-Jauregui2018]. Finally, the switching behavior of the pendulum in the transition region can be used for designing bifurcation amplifiers for the single-shot nondissipative readout of qubits [@Vijay2009].
The paper is organized as follows. In Section \[sec:II\] we introduce the electrical circuit which realizes the pendulum-oscillator system, calculate its eigenenergies, identify the two dynamical regimes of the small oscillations and the free rotor. In Section \[sec:III\], we introduce the drive and dissipation. We discuss two formalisms for dissipation, namely the Lindblad equation and the Floquet–Born–Markov approach. Section \[sec:IV\] presents the main results for the quantum-to-classical transition and the photon blockade, focusing on the resonant case. Here, we also discuss the gate dependence, the ultra-strong coupling regime, Section \[sec:V\] is dedicated to conclusions.
Circuit-QED implementation of a Josephson pendulum coupled to a resonator {#sec:II}
=========================================================================
We discuss here the physical realization of the Josephson pendulum-resonator system as an electrical circuit consisting of a transmon device coupled capacitively to an $LC$ oscillator, as depicted in Fig. \[fig:oscpendevals\](a). The coupled system is modeled by the Hamiltonian $$\label{eq:H0}
\hat H_{0} = \hat H_{\rm r} + \hat H_{\rm t} + \hat H_{\rm c},$$ where $$\begin{aligned}
\hat H_{\rm r} &=& \hbar\omega_{\rm r}\hat a^{\dag}\hat a, \label{eq:Hr}\\
\hat H_{\rm t} &=& 4E_{\rm C}(\hat n-n_{\rm g})^2 - E_{\rm J}\cos \hat \varphi, \label{eq:transmonHam}\\
\hat H_{\rm c} &=& \hbar g\hat n(\hat a^{\dag}+\hat a)\end{aligned}$$ describe the resonator, the transmon, and their coupling, respectively. We have defined $\hat a$ as the annihilation operator of the harmonic oscillator, and used $\hat n = -i\partial /\partial\varphi$ as the conjugate momentum operator of the superconducting phase difference $\hat \varphi$. These operators obey the canonical commutation relation $[\hat \varphi,\hat n]=i$. The angular frequency of the resonator is given by $\omega_{\rm r}$. We have also denoted the Josephson energy with $E_{\rm J}$, and the charging energy with $E_{\rm C } = e^2/(2C_\Sigma)$ where the capacitance on the superconducting island of the transmon is given as $C_{\Sigma}=C_{\rm B} + C_{\rm J} + C_{\rm g}$. Using the circuit diagram in Fig. \[fig:oscpendevals\](a), we obtain the coupling constant $g = 2 e C_{\rm g}q_{\rm zp}/(\hbar C_{\Sigma} C_{\rm r})$, where the zero-point fluctuation amplitude of the oscillator charge is denoted with $q_{\rm zp} = \sqrt{C_{\rm r}\hbar \omega_{\rm r}/2}$ [@koch2007].
Let us briefly discuss the two components of this system: the Josephson pendulum and the resonator. The pendulum physics is realized by the superconducting transmon circuit [@koch2007] in Fig. \[fig:oscpendevals\](a) and described by the Hamiltonian $\
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: 'High-mass stars form within star clusters from dense, molecular regions, but is the process of cluster formation slow and hydrostatic or quick and dynamic? We link the physical properties of high-mass star-forming regions with their evolutionary stage in a systematic way, using Herschel and Spitzer data. In order to produce a robust estimate of the relative lifetimes of these regions, we compare the fraction of dense, molecular regions above a column density associated with high-mass star formation, N(H$_2$) $>$ 0.4-2.5 $\times$ 10$^{22}$ cm$^{-2}$, in the ‘starless’ (no signature of stars $\gtrsim$ 10 forming) and star-forming phases in a 2$\times$2 region of the Galactic Plane centered at $\ell$=30. Of regions capable of forming high-mass stars on $\sim$1 pc scales, the starless (or embedded beyond detection) phase occupies about 60-70% of the dense molecular region lifetime and the star-forming phase occupies about 30-40%. These relative lifetimes are robust over a wide range of thresholds. We outline a method by which relative lifetimes can be anchored to absolute lifetimes from large-scale surveys of methanol masers and UCHII regions. A simplistic application of this method estimates the absolute lifetime of the starless phase to be 0.2-1.7 Myr (about 0.6-4.1 fiducial cloud free-fall times) and the star-forming phase to be 0.1-0.7 Myr (about 0.4-2.4 free-fall times), but these are highly uncertain. This work uniquely investigates the star-forming nature of high-column density gas pixel-by-pixel and our results demonstrate that the majority of high-column density gas is in a starless or embedded phase.'
author:
- 'Cara Battersby, John Bally, & Brian Svoboda'
bibliography:
- 'references1.bib'
title: 'The Lifetimes of Phases in High-Mass Star-Forming Regions'
---
2hp[N$_{2}$H$^{+}$]{} 3CO[$^{13}$CO]{} 3[NH$_{3}$]{}
Introduction
============
Whether star clusters and high-mass stars form as the result of slow, equilibrium collapse of clumps [e.g., @tan06] over several free-fall times or if they collapse quickly on the order of a free-fall time [e.g., @elm07; @har07], perhaps mediated by large scale accretion along filaments [@mye09], remains an open question. The stars that form in these regions may disrupt and re-distribute the molecular material from which they formed without dissociating it, allowing future generations of star formation in the cloud with overall long GMC lifetimes [20-40 Myr, e.g.; @kaw09]. The scenario of quick, dynamic star formation sustained over a long time by continued inflow of material is motivated by a variety of observations [discussed in detail in @elm07; @har07], and more recently by the lack of starless massive protoclusters [@gin12; @urq14; @cse14] observed through blind surveys of cold dust continuum emission in the Galaxy. Additionally, observations of infall of molecular material on large scales [@sch10; @per13] suggest that GMCs are dynamic and evolve quickly, but that material may be continually supplied into the region.
To study the formation, early evolution, and lifetimes of high-mass star-forming regions, we investigate their earliest evolutionary phase in dense, molecular regions (DMRs). The gas in regions that form high-mass stars, DMRs, has high densities [10$^{4-7}$ cm$^{-3}$; @lad03] and cold temperatures [10-20 K; @rat10; @bat11] and is typically detected by submm observations where the cold, dust continuum emission peaks. Given the appropriate viewing angle, these regions can also be seen in silhouette as Infrared Dark Clouds (IRDCs) absorbing the diffuse, mid-IR, Galactic background light. @bat11 showed that by using a combination of data [including measurements of their temperatures and column densities from Hi-GAL; @mol10], we can sample DMRs and classify them as starless or star-forming in a more systematically robust way than just using one wavelength (e.g. an IRDC would not be ‘dark’ on the far side of the Galaxy, so a mid-IR-only selection would exclude those DMRs).
Most previous studies of high-mass star-forming region lifetimes have focused on discrete ‘clumps’ of gas, usually identified in the dust continuum [e.g. @hey16; @cse14; @dun11a]. However, oftentimes these ‘clumps’ contain sub-regions of quiescence and active star formation and cannot simply be classified as either. To lump these regions together and assign the entire ‘clump’ as star-forming or quiescent can cause information to be lost on smaller scales within the clump. For example, the filamentary cloud highlighted in a black box in centered at \[30.21, -0.18\] clearly contains an actively star-forming and a quiescent region, but is identified as a single clump in the Bolocam Galactic Plane Survey [@gin13; @ros10; @agu11], as 3 clumps in the first ATLASGAL catalog [@contreras13; @urq14b], and as 5 clumps in the second ATLASGAL catalog [@cse14]. Resolution and sensitivity are not the primary drivers for the number of clumps identified, rather it is algorithmic differences, such as bolocat vs. clumpfind or gaussclumps.
In this paper, we present an alternate approach that circumvents the issues surrounding clump identification, by retaining the available information in a pixel-by-pixel analysis of the maps. All together, the pixels give us a statistical overview of the different evolutionary stages. Pixels that satisfy the criteria for high-mass star formation, explicated in the paper, are referred to as dense molecular regions (DMRs). We compare the fractions of the statistical ensembles of starless and star-forming DMRs to estimate their relative lifetimes.
Previous lifetime estimates, based primarily on mid-IR emission signatures toward samples of IRDCs or dust continuum clumps, found relative starless fractions between about 30-80% and extrapolate these to absolute starless lifetimes ranging anywhere between 10$^{3}$-10$^{6}$ years. Notably, the recent comprehensive studies of clump lifetimes from @svo16 and @hey16 find starless fractions of 47% and 69%, respectively. Our approach differs from previous methods by 1) not introducing clump boundaries, thereby using the highest resolution information available, 2) defining regions capable of forming high-mass stars based strictly on their column density, and 3) using the dust temperature and the mid-IR emission signature to classify a region as starless or star-forming.
Methods {#sec:method}
=======
The Galactic Plane centered at Galactic longitude $\ell =$ 30 contains one of the largest concentrations of dense gas and dust in the Milky Way. Located near the end of the Galactic bar and the start of the Scutum-Centaurus spiral arm, this region contains the massive W43 star forming complex at a distance of 5.5 kpc [@ell15] and hundreds of massive clumps and molecular clouds with more than 80% of the emission having = 80 to 120 implying a kinematic distance between 5 and 9 kpc [@Carlhoff13; @ell13; @ell15]. We investigate the properties and star-forming stages of DMRs in a 2$\times$ 2 field centered at \[$\ell$,b\] = \[30, 0\] using survey data from Hi-GAL [@mol10], GLIMPSE [@ben03], 6.7 GHz CH$_{3}$OH masers [@pes05], and UCHII regions [@woo89].
In a previous work, we measured T$_{dust}$ and N(H$_{2}$) from modified blackbody fits to background-subtracted Hi-GAL data from 160 to 500 using methods described in @bat11 and identified each pixel as mid-IR-bright, mid-IR-neutral, or mid-IR-dark, based on its contrast at 8 . The column density and temperature maps are produced using data which have had the diffuse Galactic component removed, as described in @bat11. We use the 25 version of the maps, convolving and regridding all the data to this resolution, which corresponds to beam sizes of 0.6 and 1.1pc and pixel sizes of 0.13 and 0.24 pc at typical distances of 5 and 9 kpc.
In this work, we identify pixels above a column density threshold capable of forming high-mass stars (§\[sec:nh2\_thresh\]), then, on a pixel-by-pixel basis, identify them as starless or star-forming (§\[sec:starry\]), and from their fractions infer their relative lifetimes. Using absolute lifetimes estimated from survey statistics of 6.7 CH$_{3}$OH masers and UCHII regions, we anchor our relative lifetimes to estimate the absolute lifetimes of the DMRs (§\[sec:maser\] and \[sec:uchii\]).
Previous works (see §\[sec:comp\]) have estimated star-forming lifetimes over contiguous “clumps," typically $\sim$1 pc in size. However, sub-mm identified
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: 'We study supersymmetric black holes in $AdS_4$ in the framework of four dimensional gauged $\N=2$ supergravity coupled to hypermultiplets. We derive the flow equations for a general electrically gauged theory where the gauge group is Abelian and, restricting them to the fixed points, we derive the gauged supergravity analogue of the attractor equations for theories coupled to hypermultiplets. The particular models we analyze are consistent truncations of M-theory on certain Sasaki-Einstein seven-manifolds. We study the space of horizon solutions of the form $AdS_2\times \Sig_g$ with both electric and magnetic charges and find a four-dimensional solution space when the theory arises from a reduction on $Q^{111}$. For other $SE_7$ reductions, the solutions space is a subspace of this. We construct explicit examples of spherically symmetric black holes numerically.'
---
1.5cm Nick Halmagyi$^*$, Michela Petrini$^*$, Alberto Zaffaroni$^{\dagger}$\
0.5cm $^{*}$ Laboratoire de Physique Théorique et Hautes Energies,\
Université Pierre et Marie Curie, CNRS UMR 7589,\
F-75252 Paris Cedex 05, France\
0.5cm $\dagger$ Dipartimento di Fisica, Università di Milano–Bicocca,\
I-20126 Milano, Italy\
and\
INFN, sezione di Milano–Bicocca,\
I-20126 Milano, Italy\
0.5cm
halmagyi@lpthe.jussieu.fr\
petrini@lpthe.jussieu.fr\
alberto.zaffaroni@mib.infn.it
Introduction
============
Supersymmetric, asymptotically $AdS_4$ black holes[^1] with regular spherical horizons have recently been discovered in $\N=2$ gauged supergravities with vector multiplets [@Cacciatori:2009iz]. These solutions have been further studied in [@DallAgata2011; @Hristov:2010ri]. The analytic solution for the entire black hole was constructed and shown to be one quarter-BPS. For particular choices of prepotential and for particular values of the gauge couplings, these black holes can be embedded into M-theory and are asymptotic to $AdS_4\times S^7$.
The goal of this work is to study supersymmetric, asymptotically $AdS_4$ black holes in more general gauged supergravities, with both vector and hypermultiplets. The specific theories we focus on are consistent truncations of string or M-theory. Supersymmetric black holes in these theories involve running hypermultiplet scalars and are substantially different from the examples in [@Cacciatori:2009iz]. The presence of hypers prevents us from finding analytic solutions of the BPS conditions, nevertheless we study analytically the space of supersymmetric horizon solutions $AdS_2\times \Sigma_g$ and show that there is a large variety of them. We will then find explicit spherically symmetric black hole solutions interpolating between $AdS_4$ and $AdS_2\times S^2$ by numerical methods. The black holes we construct have both electric and magnetic charges.
Our demand that the supergravity theory is a consistent truncation of M-theory and that the asymptotic $AdS_4$ preserves $\N=2$ supersymmetry limits our search quite severely. Some of the gauged supergravity theories studied in [@Cacciatori:2009iz] correspond to the $\N=2$ truncations [@Cvetic1999b; @Duff:1999gh] of the de-Wit/Nicolai $\N=8$ theory [@deWit:1981eq] where only massless vector multiplets are kept. In this paper we will focus on more general theories obtained as consistent truncations of M-theory on seven-dimensional Sasaki-Einstein manifolds. A consistent truncation of eleven-dimensional supergravity on a Sasaki-Einstein manifold to a universal sector was obtained in [@Gauntlett:2007ma; @Gauntlett:2009zw]. More recently the general reduction of eleven-dimensional supergravity to four dimensions on left-invariant coset manifolds with $SU(3)$-structure has been performed in [@Cassani:2012pj][^2]. Exploiting the coset structure of the internal manifold it is possible to truncate the theory in such a way to also keep massive Kaluza-Klein multiplets. These reductions can, by their very construction, be lifted directly to the higher dimensional theory and are guaranteed to solve the higher dimensional equations of motion.
The black holes we construct represent the gravitational backreaction of bound states of M2 and M5-branes wrapped on curved manifolds in much the same manner as was detailed by Maldacena and Nunez [@Maldacena:2000mw] for D3-branes in $AdS_5 \times S^5$ and M5-branes in $AdS_7 \times S^4$. To preserve supersymmetry, a certain combination of the gauge connections in the bulk is set equal to the spin connection, having the effect of twisting the worldvolume gauge theory in the manner of [@Witten:1988xj]. For D3-branes, for particular charges, the bulk system will flow to $AdS_3 \times \Sigma_g$ in the IR and the entire solution represents an asymptotically $AdS_5$ black string. The general regular flow preserves just 2 real supercharges and thus in IIB string theory it is $\frac{1}{16}$-BPS. Similarly, for the asymptotically $AdS_7$, black M5-brane solutions, depending on the charges, the IR geometry is $AdS_5\times \Sig_g$ and the dual $CFT_4$ may have $\N=2$ or $\N=1$ supersymmetry. These $\N=2$ SCFT’s and their generalizations have been of much recent interest [@Gaiotto2012h; @Gaiotto2009] and the $\N=1$ case has also been studied [@Benini:2009mz; @Bah:2012dg].
By embedding the $AdS_4$ black holes in M-theory we can see them as M2-brane wrapping a Riemann surface. For particular charges, the bulk system will flow to $AdS_2 \times \Sigma_g$ in the IR and represents a black hole with regular horizon. The original examples found in [@Caldarelli1999] can be reinterpreted in this way; it has four equal magnetic charges and can be embedded in $AdS_4 \times S^7$. The explicit analytic solution is known and it involves constant scalars and a hyperbolic horizon. A generalization of [@Maldacena:2000mw] to M2-branes wrapping $\Sig_g$ was performed in [@Gauntlett2002] where certain very symmetric twists were considered. Fully regular solutions for M2 branes wrapping a two-sphere with running scalars were finally found in [@Cacciatori:2009iz] in the form of $AdS_4$ black holes. It is note-worthy that of all these scenarios of branes wrapping Riemann surfaces, the complete analytic solution for general charges is known only for M2-branes on $\Sig_g$ with magnetic charges [@Cacciatori:2009iz].
One way to generalize these constructions of branes wrapped on $\Sig_g$ is to have more general transverse spaces. This is the focus of this article. For M5-branes one can orbifold $S^4$ while for D3-branes one can replace $S^5$ by an arbitrary $SE_5$ manifold and indeed a suitable consistent truncation on $T^{11}$ has indeed been constructed [@Bena:2010pr; @Cassani:2010na]. For M2-branes one can replace $S^7$ by a seven-dimensional Sasaki-Einstein manifold $SE_7$ and, as discussed above, the work of [@Cassani:2012pj] provides us with a rich set of consistent truncations to explore. Interestingly, in our analysis we find that there are no solutions for pure M2-brane backgrounds, there must be additional electric and magnetic charges corresponding to wrapped M2 and M5-branes on internal cycles. Asymptotically $AdS_4$ black holes with more general transverse space can be found in [@Donos:2008ug] and [@Donos2012d] where the solutions were studied directly in M-theory. These include the M-theory lift of the solutions we give in Sections \[sec:Q111Simp\] and \[numericalQ111\].
The BPS black holes we construct in this paper are asymptotically $AdS_4$ and as such they are states in particular (deformed) three-dimensional superconformal field theories on $S^2\times \mathbb{R}$. The solution in [@Cacciatori:2009iz] can be considered as a state in the twisted ABJM theory [@Aharony:2008ug]. The solutions we have found in this paper can be seen as states in (twisted and deformed) three dimensional Chern-Simons matter theory dual to the M-theory compactifications of homogeneous Sasaki-Einstein manifolds[^3]. One feature of these theories compared to ABJM is the presence of many baryonic symmetries that couple to the vector multiplets arising from non trivial two-cycles in the Sasaki
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: 'The number $R(4,3,3)$ is often presented as the unknown Ramsey number with the best chances of being found “soon”. Yet, its precise value has remained unknown for almost 50 years. This paper presents a methodology based on *abstraction* and *symmetry breaking* that applies to solve hard graph edge-coloring problems. The utility of this methodology is demonstrated by using it to compute the value $R(4,3,3)=30$. Along the way it is required to first compute the previously unknown set ${{\cal R}}(3,3,3;13)$ consisting of 78[,]{}892 Ramsey colorings.'
author:
- Michael Codish
- Michael Frank
- Avraham Itzhakov
- Alice Miller
title: 'Computing the Ramsey Number R(4,3,3) using Abstraction and Symmetry breaking[^1]'
---
Introduction {#sec:intro}
============
This paper introduces a general methodology that applies to solve graph edge-coloring problems and demonstrates its application in the search for Ramsey numbers. These are notoriously hard graph coloring problems that involve assigning colors to the edges of a complete graph. An $(r_1,\ldots,r_k;n)$ Ramsey coloring is a graph coloring in $k$ colors of the complete graph $K_n$ that does not contain a monochromatic complete sub-graph $K_{r_i}$ in color $i$ for each $1\leq i\leq k$. The set of all such colorings is denoted ${{\cal R}}(r_1,\ldots,r_k;n)$. The Ramsey number $R(r_1,\ldots,r_k)$ is the least $n>0$ such that no $(r_1,\ldots,r_k;n)$ coloring exists. In particular, the number $R(4,3,3)$ is often presented as the unknown Ramsey number with the best chances of being found “soon”. Yet, its precise value has remained unknown for more than 50 years. It is currently known that $30\leq R(4,3,3)\leq 31$. Kalbfleisch [@kalb66] proved in 1966 that $R(4,3,3)\geq 30$, Piwakowski [@Piwakowski97] proved in 1997 that $R(4,3,3)\leq 32$, and one year later Piwakowski and Radziszowski [@PR98] proved that $R(4,3,3)\leq 31$. We demonstrate how our methodology applies to computationally prove that $R(4,3,3)=30$.
Our strategy to compute $R(4,3,3)$ is based on the search for a $(4,3,3;30)$ Ramsey coloring. If one exists, then because $R(4,3,3)\leq 31$, it follows that $R(4,3,3) = 31$. Otherwise, because $R(4,3,3)\geq 30$, it follows that $R(4,3,3) = 30$.
In recent years, Boolean SAT solving techniques have improved dramatically. Today’s SAT solvers are considerably faster and able to manage larger instances than were previously possible. Moreover, encoding and modeling techniques are better understood and increasingly innovative. SAT is currently applied to solve a wide variety of hard and practical combinatorial problems, often outperforming dedicated algorithms. The general idea is to encode a (typically, NP) hard problem instance, $\mu$, to a Boolean formula, $\varphi_\mu$, such that the satisfying assignments of $\varphi_\mu$ correspond to the solutions of $\mu$. Given such an encoding, a SAT solver can be applied to solve $\mu$.
Our methodology in this paper combines SAT solving with two additional concepts: *abstraction* and *symmetry breaking*. The paper is structured to let the application drive the presentation of the methodology in three steps. Section \[sec:prelim\] presents: preliminaries on graph coloring problems, some general notation on graphs, and a simple constraint model for Ramsey coloring problems. Section \[sec:embed\] presents the first step in our quest to compute $R(4,3,3)$. We introduce a basic SAT encoding and detail how a SAT solver is applied to search for Ramsey colorings. Then we describe and apply a well known embedding technique, which allows to determine a set of partial solutions in the search for a $(4,3,3;30)$ Ramsey coloring such that if a coloring exists then it is an extension of one of these partial solutions. This may be viewed as a preprocessing step for a SAT solver which then starts from a partial solution. Applying this technique we conclude that if a $(4,3,3;30)$ Ramsey coloring exists then it must be ${\langle 13,8,8 \rangle}$ regular. Namely, each vertex in the coloring must have 13 edges in the first color, and 8 edges in each of the other two colors. This result is already considered significant progress in the research on Ramsey numbers as stated in [@XuRad2015]. To further apply this technique to determine if there exists a ${\langle 13,8,8 \rangle}$ regular $(4,3,3;30)$ Ramsey coloring requires to first compute the currently unknown set ${{\cal R}}(3,3,3;13)$.
Sections \[sec:symBreak\]—\[sec:33313b\] present the second step: computing ${{\cal R}}(3,3,3;13)$. Section \[sec:symBreak\] illustrates how a straightforward approach, combining SAT solving with *symmetry breaking*, works for smaller instances but not for ${{\cal R}}(3,3,3;13)$. Then Section \[sec:abs\] introduces an *abstraction*, called degree matrices, Section \[sec:33313\] demonstrates how to compute degree matrices for ${{\cal R}}(3,3,3;13)$, and Section \[sec:33313b\] shows how to use the degree matrices to compute ${{\cal R}}(3,3,3;13)$. Section \[sec:433\_30\] presents the third step re-examining the embedding technique described in Section \[sec:embed\] which given the set ${{\cal R}}(3,3,3;13)$ applies to prove that there does not exist any $(4,3,3;30)$ Ramsey coloring which is also ${\langle 13,8,8 \rangle}$ regular. Section \[sec:conclude\] presents a conclusion.
Preliminaries and Notation {#sec:prelim}
==========================
In this paper, graphs are always simple, i.e. undirected and with no self loops. For a natural number $n$ let $[n]$ denote the set $\{1,2,\ldots,n\}$. A graph coloring, in $k$ colors, is a pair $(G,\kappa)$ consisting of a simple graph $G=(V,E)$ and a mapping $\kappa\colon E\to[k]$. When $G$ is clear from the context we refer to $\kappa$ as the graph coloring. We typically represent $G=([n],E)$ as a (symmetric) $n\times n$ adjacency matrix, $A$, defined such that $$A_{i,j}=
\begin{cases}
\kappa((i,j)) & \mbox{if } (i,j) \in E\\
0 & \mbox{otherwise}
\end{cases}$$
Given a graph coloring $(G,\kappa)$ in $k$ colors with $G=(V,E)$, the set of neighbors of a vertex $u\in V$ in color $c\in [k]$ is $N_c(u) = {\left\{~v \left|
\begin{array}{l}(u,v)\in E, \kappa((u,v))=c\end{array}
\right. \right\}} $ and the color-$c$ degree of $u$ is $deg_{c}(u) = |N_c(u)|$. The color degree tuple of $u$ is the $k$-tuple $deg(u)={\langle deg_{1}(u),\ldots,deg_{k}(u) \rangle}$. The sub-graph of $G$ on the $c$ colored neighbors of $x\in V$ is the projection of $G$ to vertices in $N_c(x)$ defined by $G^c_x =
(N_c(x),{\left\{~(u,v)\in E \left|
\begin{array}{l}u,v\in N_c(x)\end{array}
\right. \right\}})$.
For example, take as $G$ the graph coloring depicted by the adjacency matrix in Figure \[embed\_12\_8\_8\] with $u$ the vertex corresponding to the first row in the matrix. Then, $N_1(u) = \{2,3,4,5,6,7,8,9,10,11,12,13\}$, $N_2(u) =
\{14,15,16,17,18,19,20,21\}$, and $N_3(u)=\{22,23,24,25,26,27,28,29\}$. The subgraphs $G^1_u$, $G^2_u$, and $G^3_u$ are highlighted by the boldface text in Figure \[embed\_12\_8\_8\].
An $(r_1,\ldots
|
{
"pile_set_name": "ArXiv"
}
|
---
author:
- |
John Smith,$^{1\ast}$ Jane Doe,$^{1}$ Joe Scientist$^{2}$\
\
\
\
\
\
bibliography:
- 'scibib.bib'
title: 'A simple [*Science*]{} Template'
---
This document presents a number of hints about how to set up your [*Science*]{} paper in LaTeX . We provide a template file, `scifile.tex`, that you can use to set up the LaTeX source for your article. An example of the style is the special `{sciabstract}` environment used to set up the abstract you see here.
Introduction {#introduction .unnumbered}
============
In this file, we present some tips and sample mark-up to assure your LaTeX file of the smoothest possible journey from review manuscript to published [*Science*]{} paper. We focus here particularly on issues related to style files, citation, and math, tables, and figures, as those tend to be the biggest sticking points. Please use the source file for this document, `scifile.tex`, as a template for your manuscript, cutting and pasting your content into the file at the appropriate places.
[*Science*]{}’s publication workflow relies on Microsoft Word. To translate LaTeX files into Word, we use an intermediate MS-DOS routine [@tth] that converts the TeX source into HTML. The routine is generally robust, but it works best if the source document is clean LaTeX without a significant freight of local macros or `.sty` files. Use of the source file `scifile.tex` as a template, and calling [*only*]{} the `.sty` and `.bst` files specifically mentioned here, will generate a manuscript that should be eminently reviewable, and yet will allow your paper to proceed quickly into our production flow upon acceptance [@use2e].
Formatting Citations {#formatting-citations .unnumbered}
====================
Citations can be handled in one of three ways. The most straightforward (albeit labor-intensive) would be to hardwire your citations into your LaTeX source, as you would if you were using an ordinary word processor. Thus, your code might look something like this:
> However, this record of the solar nebula may have been
> partly erased by the complex history of the meteorite
> parent bodies, which includes collision-induced shock,
> thermal metamorphism, and aqueous alteration
> ({\it 1, 2, 5--7\/}).
Compiled, the last two lines of the code above, of course, would give notecalls in [*Science*]{} style:
> …thermal metamorphism, and aqueous alteration ([*1, 2, 5–7*]{}).
Under the same logic, the author could set up his or her reference list as a simple enumeration,
> {\bf References and Notes}
>
> \begin{enumerate}
> \item G. Gamow, {\it The Constitution of Atomic Nuclei
> and Radioactivity\/} (Oxford Univ. Press, New York, 1931).
> \item W. Heisenberg and W. Pauli, {\it Zeitschr.\ f.\
> Physik\/} {\bf 56}, 1 (1929).
> \end{enumerate}
yielding
> [**References and Notes**]{}
>
> 1. G. Gamow, [*The Constitution of Atomic Nuclei and Radioactivity*]{} (Oxford Univ. Press, New York, 1931).
>
> 2. W. Heisenberg and W. Pauli, [*Zeitschr. f. Physik*]{} [**56**]{}, 1 (1929).
>
That’s not a solution that’s likely to appeal to everyone, however — especially not to users of BTeX [@inclme]. If you are a BTeX user, we suggest that you use the `Science.bst` bibliography style file and the `scicite.sty` package, both of which are downloadable from our author help site. [**While you can use BTeX to generate the reference list, please don’t submit your .bib and .bbl files; instead, paste the generated .bbl file into the .tex file, creating `{thebibliography}` environment.**]{} You can also generate your reference lists directly by using `{thebibliography}` at the end of your source document; here again, you may find the `scicite.sty` file useful.
Whatever you use, be very careful about how you set up your in-text reference calls and notecalls. In particular, observe the following requirements:
1. Please follow the style for references outlined at our author help site and embodied in recent issues of [*Science*]{}. Each citation number should refer to a single reference; please do not concatenate several references under a single number.
2. The reference numbering continues from the main text to the Supplementary Materials (e.g. this main text has references 1-3; the numbering of references in the Supplementary Materials should start with 4).
3. Please cite your references and notes in text [*only*]{} using the standard LaTeX `\cite` command, not another command driven by outside macros.
4. Please separate multiple citations within a single `\cite` command using commas only; there should be [*no space*]{} between reference keynames. That is, if you are citing two papers whose bibliography keys are `keyname1` and `keyname2`, the in-text cite should read `\cite{keyname1,keyname2}`, [*not*]{} `\cite{keyname1, keyname2}`.
Failure to follow these guidelines could lead to the omission of the references in an accepted paper when the source file is translated to Word via HTML.
Handling Math, Tables, and Figures {#handling-math-tables-and-figures .unnumbered}
==================================
Following are a few things to keep in mind in coding equations, tables, and figures for submission to [*Science*]{}.
#### In-line math. {#in-line-math. .unnumbered}
The utility that we use for converting from LaTeX to HTML handles in-line math relatively well. It is best to avoid using built-up fractions in in-line equations, and going for the more boring “slash” presentation whenever possible — that is, for `$a/b$` (which comes out as $a/b$) rather than `$\frac{a}{b}$` (which compiles as $\frac{a}{b}$). Please do not code arrays or matrices as in-line math; display them instead. And please keep your coding as TeX-y as possible — avoid using specialized math macro packages like `amstex.sty`.
#### Tables. {#tables. .unnumbered}
The HTML converter that we use seems to handle reasonably well simple tables generated using the LaTeX`{tabular}` environment. For very complicated tables, you may want to consider generating them in a word processing program and including them as a separate file.
#### Figures. {#figures. .unnumbered}
Figure callouts within the text should not be in the form of LaTeX references, but should simply be typed in — that is, `(Fig. 1)` rather than `\ref{fig1}`. For the figures themselves, treatment can differ depending on whether the manuscript is an initial submission or a final revision for acceptance and publication. For an initial submission and review copy, you can use the LaTeX `{figure}` environment and the `\includegraphics` command to include your PostScript figures at the end of the compiled file. For the final revision, however, the `{figure}` environment should [*not*]{} be used; instead, the figure captions themselves should be typed in as regular text at the end of the source file (an example is included here), and the figures should be uploaded separately according to the Art Department’s instructions.
What to Send In {#what-to-send-in .unnumbered}
===============
What you should send to [*Science*]{} will depend on the stage your manuscript is in:
- [**Important:**]{} If you’re sending in the initial submission of your manuscript (that is, the copy for evaluation and peer review), please send in [*only*]{} a PDF version of the compiled file (including figures). Please do not send in the TeX source, `.sty`, `.bbl`, or other associated files with your initial submission. (For more information, please see the instructions at our Web submission site.)
- When the time comes for you to send in your revised final manuscript (i.e., after peer review), we require that you include source files and generated files in your upload. [**The .tex file should include the reference list as an itemized list (see “Formatting citations” for the various options). The bibliography should not be in a separate file.**]{} Thus, if the name of your main source document is `ltxfile.tex`, you need to include:
- `ltxfile.tex`.
- `ltxfile.aux`, the auxilliary file generated by the compilation.
- A PDF file generated from `ltxfile.tex`.
Acknowledgments {#acknowledgments .unnumbered}
===============
Include acknowledgments of funding, any patents
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: 'In this paper we review the recent results on strangeness production measured by HADES in the Ar+KCl system at a beam energy of 1.756 AGeV. A detailed comparison of the measured hadron yields with the statistical model is also discussed.'
address:
- |
GSI Helmholtz Centre for Heavy Ion Research GmbH Planckstrasse 1,\
D-64291 Darmstadt, GERMANY
- 'Excellence Cluster ’Universe’, Technische Universität München, Boltzmannstr. 2, D-85748 Garching Germany.'
author:
- 'J. Pietraszko [^1] L. Fabbietti (for the HADES collaboration)'
title: Strangeness Production at SIS measured with HADES
---
Hadron production in Ar+KCl collisions
======================================
The study of nuclear matter properties at high densities and temperatures is one of the main objectives in relativistic heavy-ion physics. In this context, the paramount aim of measuring the particle yields emitted from heavy-ion collisions is to learn about the K-N potential, production mechanism of strange particles or the nuclear equation of state. Strangeness production in relativistic heavy-ion collisions at SIS/Bevelac energy range has been extensively studied by various groups including experiments at the Bevelac[@bevelac_1] and at SIS, KaoS[@kaos_1], FOPI[@fopi_1], and in recent years also HADES.\
Recently, the HADES[@hades_nim] collaboration measured charged particle production in the Ar+KCl system[@hades_kaons] at 1.756 AGeV. Although HADES was designed primarily for di-electron measurements, it has also shown an excellent capability for the identification of a wide range of hadrons like $K^-$, $K^+$, K$^0$$\rightarrow$$\pi^+\pi^-$, $\Lambda$$\rightarrow$p$\pi^-$, $\phi$$\rightarrow$$K$$^+$$K$$^-$ and even $\Xi$$\rightarrow$$\Lambda$$\pi^-$. The measured yields and slopes of the transverse mass of kaons and $\Lambda$ particles have been found to be in good agreement with the results obtained by KaoS[@kaos_0] and FOPI[@fopi_0]. The dependencies of the measured $K^-/K^+$ ratio on the centrality and on the collision energy follow the systematics measured by KaoS [@hades_kaons] too.\
A combined and inclusive identification of $K^+K^-$ and $\phi$ mesons was performed for the first time in the same experimental setup at subthreshold beam energy for $K^-$ and $\phi$ production. The obtained $\phi/K^-$ ratio of 0.37$\pm$0.13$\%$ indicates that 18$\pm$7$\%$ of kaons stem from $\phi$ decays. Since the $\phi$ mesons reconstructed via $K^+K^-$ channel are those coming mainly from decays happening outside the nuclear medium, this value should be considered as a lower limit. In addition the non-resonant $K^+K^-$ production can contribute to the measured $K^-$ yield. Unfortunately, this part is not known in heavy-ion collisions, but it has been measured to be about 50$\%$ of the overall $K^+K^-$ yield in elementary p+p collisions[@anke_1]. In this view, the $K^-$ production in heavy-ion collisions at SIS energies can not be explained exclusively by the strangeness exchange mechanism and the processes mentioned above must also be taken into account to achieve a complete description.
Comparison to statistical models
================================
The yields of reconstructed hadron species have been extrapolated to the full solid angle and compared to the result from a fit with the statistical model THERMUS[@thermus_1] as shown in Fig. \[fig:thermus\]. The measured yields nicely agree with the results of the model, except for the $\Xi^-$. One should note that in this approach a good description of the $\phi$ meson yield is obtained without assuming any strangeness suppression (net strangeness content of the $\phi$ is S=0). This is very different as compared to higher energies where $\phi$ meson does not behave as a strangeness neutral object but rather as an object with net strangeness between 1 and 2 [@strgns_phi].\
(200,180)(0,0) (-32,-2.6)[ ![Chemical freeze-out parameters obtained in the statistical thermal model (for details see [@cleymans_1]). The HADES point corresponds to Ar+KCl collisions at 1.756 AGeV.[]{data-label="fig:statmodel"}](thermus_fits1.10_publ.eps "fig:"){width="110.00000%" height=".915\textwidth"}]{}
(200,180)(0,0) (0,-15)[ ![Chemical freeze-out parameters obtained in the statistical thermal model (for details see [@cleymans_1]). The HADES point corresponds to Ar+KCl collisions at 1.756 AGeV.[]{data-label="fig:statmodel"}](eovern_2009_to_be_publ.eps "fig:"){width=".97\textwidth" height=".97\textwidth"}]{}
The $\Xi^-$ baryon yields measured in heavy-ion collisions above the production threshold at RHIC[@rhic_1], SPS[@sps_1] and AGS[@ags_1] nicely agree with the statistical model predictions. On the contrary the result of the first $\Xi^-$ measurement below the production threshold published by HADES[@hades_ksi], shows a deviation of about an order of magnitude from the calculations (Fig. \[fig:thermus\]). Using the measured hadron multiplicities the statistical model predicts that the chemical freeze-out of the Ar+KCl collision at 1.765 AGeV occurs at a temperature of T=73$\pm$6MeV and at chemical baryon potential of $\mu$=770$\pm$43MeV. The strangeness correlation radius[@hades_kaons] of R$_c=$2.4$\pm$0.8fm was used which is significantly smaller than the radius of fireball R$_{fireball}$=4.9$\pm$1.4fm.\
This result nicely follows the striking regularity shown by particle yields at all beam energies [@cleymans_1], as presented in Fig. \[fig:statmodel\]. For all available energies, starting from the highest at RHIC down to the lowest at SIS, the measured particle multiplicities are consistent with the assumption of chemical equilibrium which sets in at the end of the collision phase. Only two parameters (the temperature and baryon chemical potential) are needed within a thermal-statistical model to describe particle yields in a very systematic way at a given collision energy [@cleymans_1]. As one can also see, all experimental results are in good agreement with a fixed-energy-per-particle condition $<E>$$/$$<N>$$\approx1GeV$, which is one of the available freeze-out criteria[@cleymans_1].
The new HADES results on strangeness production shed new light on the understanding of kaon production mechanisms in HI collisions, namely the results have provided compelling evidence that the contribution from the $\phi$ decay to the $K^-$ yield has to be also taken into account. The measured hadron yields have been found in general to be in good agreement with statistical model predictions, besides the $\Xi^-$, which is produced far below the production threshold and shows a considerable deviation from the statistical model. The already performed experiments p+p at 3.5 GeV and p+Nb at 3.5 GeV and further planned HADES experiments with heavier systems, like Au+Au will deliver new valuable data on strangeness production. The on-going upgrade of the HADES spectrometer will increase its performance and capability and the installed Forward Wall detector will allow for reaction plane reconstruction in all upcoming runs, allowing to study kaon flow observables as well.
[9]{} S. Schnetzer et al. Phys. Rev. Lett. 49 (1982) 989; Phys. Rev. C, 40 (1989) 640 C. Sturm et al. (KAOS) Phys. Rev. Lett. 86 (2001) 39 J. L. Ritman et al. (FOPI), Z. Phys. A 352 (1995) 355 G. Agakichiev et al. (HADES), Eur. Phys. J. A 41 (2009) 243 G.Agakichev et al., (HADES), in press Phys. Rev. C and arXiv:0902.3487 A. Förster et al. (KAOS) Phys. Rev. C 75 (2007) 024906. M. Merschmeyer et al. (FOPI) Phys. Rev. C 76 (2007) 024906 Y.Maeda et al. (ANKE), Phys. Rev. C 77 (2008) 015204 S. Wheaton and J. Cleymans, hep-ph/0407174\
S. Wheaton and J. Cleymans, J. Phys. G31 (2005) S1069 I. Kraus et al., Phys. Rev. C76, 064903 (2007) J. Adams et al. (STAR), Phys. Rev. Lett. bold[98]{}, 062301 (2007) F. Antinori et al. (NA57) Phys. Lett. B 595, 68 (2004)\
C. Alt et al. (NA49), Phys. Rev. C 78, 034918 (2008) P
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: |
We express the averages of products of characteristic polynomials for random matrix ensembles associated with compact symmetric spaces in terms of Jack polynomials or Heckman and Opdam’s Jacobi polynomials depending on the root system of the space. We also give explicit expressions for the asymptotic behavior of these averages in the limit as the matrix size goes to infinity.
[**MSC-class**]{}: primary 15A52; secondary 33C52, 05E05.\
[**Keywords**]{}: characteristic polynomial, random matrix, Jacobi polynomial, Jack polynomial, Macdonald polynomial, compact symmetric space.
author:
- '<span style="font-variant:small-caps;">Sho MATSUMOTO</span> [^1]'
title: '**Moments of characteristic polynomials for compact symmetric spaces and Jack polynomials**'
---
Introduction
============
In recent years, there has been considerable interest in the averages of the characteristic polynomials of random matrices. This work is motivated by the connection with Riemann zeta functions and $L$-functions identified by Keating and Snaith [@KS_zetafunctions; @KS_Lfunctions]. The averages of the characteristic polynomials in the cases of compact classical groups and Hermitian matrix ensembles have already calculated, see [@Mehta] and references in [@BG]. In these studies, Bump and Gamburd [@BG] obtain simple proofs for the cases corresponding to compact classical groups by using symmetric polynomial theory. Our aim in this note is to use their technique to calculate averages of the characteristic polynomials for random matrix ensembles associated with compact symmetric spaces.
We deal with the compact symmetric spaces $G/K$ classified by Cartan, where $G$ is a compact subgroup in $GL(N,{\mathbb{C}})$ for some positive integer $N$, and $K$ is a closed subgroup of $G$. Assume $G/K$ is realized as a subspace $S$ in $G$, i.e., $S \simeq G/K$, and the probability measure $\dd M$ on $S$ is then induced from $G/K$. We call the probability space $(S, \dd M)$ the random matrix ensemble associated with $G/K$.
For example, $U(n)/O(n)$ is the symmetric space with a restricted root system of type A, and is realized by $S=\{M \in U(n) \ | \ M = \trans{M} \}$. Here $\trans{M}$ stands for the transposed matrix of $M$ while $U(n)$ and $O(n)$ denote the unitary and orthogonal group of matrices or order $n$ respectively. The induced measure $\dd M$ on $S$ satisfies the invariance $\dd (H M \trans{H})= \dd M$ for any $H \in U(n)$. This random matrix ensemble $(S, \dd M)$ is well known as the circular orthogonal ensemble (COE for short), see e.g. [@Dyson; @Mehta].
We also consider the classical compact Lie groups $U(n)$, $SO(n)$, and $Sp(2n)$. Regarding these groups as symmetric spaces, the random matrix space $S$ is just the group itself with its Haar measure.
The compact symmetric spaces studied by Cartan are divided into A and BC type main branches according to their root systems. There are three symmetric spaces of type A, with their corresponding matrix ensembles called circular orthogonal, unitary, and symplectic ensembles. For these ensembles, the probability density functions (p.d.f.) for the eigenvalues are proportional to $$\Delta^{{\mathrm{Jack}}}(\bz;2/\beta)= \prod_{1 \le i<j \le n} |z_i -z_j|^{\beta},$$ with $\beta=1,2,4$, where $\bz =(z_1,\dots, z_n)$, with $|z_i|=1$, denotes the sequence of eigenvalues of the random matrix. We will express the average of the product of characteristic polynomials $\det(I+ xM)$ for a random matrix $M$ as a Jack polynomial ([@Mac Chapter VI-10]) of a rectangular-shaped Young diagram. Jack polynomials are orthogonal with respect to the weight function $\Delta^{{\mathrm{Jack}}}$. Our theorems are obtained in a simple algebraic way, and contain results given in [@KS_zetafunctions].
For compact symmetric spaces of type BC root systems, the corresponding p.d.f. is given by $$\Delta^{{\mathrm{HO}}}(\bz;k_1,k_2,k_3) =
\prod_{1 \le i <j \le n} |1-z_i z_j^{-1}|^{2k_3} |1-z_i z_j|^{2k_3}
\cdot \prod_{1 \le j \le n} |1-z_j|^{2k_1} |1-z_j^2|^{2k_2}.$$ Here the $k_i$’s denote multiplicities of roots in the root systems of the symmetric spaces. For example, the p.d.f. induced from the symmetric space $SO(4n+2)/(SO(4n+2) \cap Sp(4n+2))$ is proportional to $\Delta^{{\mathrm{HO}}}(\bz;2, \frac{1}{2},2)$. For this class of compact symmetric spaces, Opdam and Heckman’s Jacobi polynomials ([@Diejen; @Heckman]), which are orthogonal with respect to $\Delta^{{\mathrm{HO}}}$, will play the same role as Jack polynomials for type A cases. Namely, we will express the average of the product of characteristic polynomials $\det(I+ xM)$ as the Jacobi polynomial of a rectangular-shaped diagram.
This paper is organized as follows:
Our main results, which are expressions for the averages of products of characteristic polynomials, will be given §6. As described above, the symmetric spaces corresponding to the two root systems, type A and BC, will be discussed separately. For type A spaces, we use Jack polynomial theory. These discussions can be generalized to Macdonald polynomials. Thus, after preparations in §2, we give some generalized identities involving Macdonald polynomials and a generalization of the weight function $\Delta^{{\mathrm{Jack}}}$ in §3 and §4. In particular, we obtain $q$-analogues of Keating and Snaith’s formulas [@KS_zetafunctions] for the moments of characteristic polynomials and a generalization of the strong Szegö limit theorem for Toeplitz determinants. These identities are reduced to characteristic polynomial expressions for symmetric spaces of the A type root system in §6.1 - §6.3. On the other hand, for type BC spaces, we employ Opdam and Heckman’s Jacobi polynomials. We review the definition and several properties of these polynomials in §5, while in §6.4 - §6.12 we apply them to obtain expressions for the products of characteristic polynomials of random matrix ensembles associated with symmetric spaces of type BC.
Basic Properties of Macdonald symmetric functions
=================================================
We recall the definition of Macdonald symmetric functions, see [@Mac Chapter VI] for details. Let $\lambda$ be a partition, i.e., $\lambda=(\lambda_1,\lambda_2,\dots)$ is a weakly decreasing ordered sequence of non-negative integers with finitely many non-zero entries. Denote by $\ell(\lambda)$ the number of non-zero $\lambda_j$ and by $|\lambda|$ the sum of all $\lambda_j$. These values $\ell(\lambda)$ and $|\lambda|$ are called the length and weight of $\lambda$ respectively. We identify $\lambda$ with the associated Young diagram $\{(i,j) \in {\mathbb{Z}}^2 \ | \ 1 \le j \le \lambda_i \}$. The conjugate partition $\lambda'=(\lambda'_1,\lambda'_2,\dots)$ is determined by the transpose of the Young diagram $\lambda$. It is sometimes convenient to write this partition in the form $\lambda=(1^{m_1} 2^{m_2} \cdots )$, where $m_i=m_i(\lambda)$ is the multiplicity of $i$ in $\lambda$ and is given by $m_i=\lambda'_i-\lambda'_{i+1}$. For two partitions $\lambda$ and $\mu$, we write $\lambda \subset \mu$ if $\lambda_i \le \mu_i$ for all $i$. In particular, the notation $\lambda \subset (m^n)$ means that $\lambda$ satisfies $\lambda_1 \le m$ and $\lambda_1' \le n$. The dominance ordering associated with the root system of type A is defined as follows: for two partitions $\lambda=(\lambda_1,\lambda_2,\dots)$ and $\mu=(\mu_1,\mu_2,\dots)$, $$\mu \le_{{\mathrm{A}}} \lambda \qquad \Leftrightarrow \qquad
|\lambda|=|\mu|
\quad \text{and} \quad
\mu_1 + \cdots+\mu_i \le \lambda_1+ \cdots +\lambda_i \quad \text{for all $i \ge 1$}.$$
Let $q$ and $t$ be real numbers such that both $|q|<1$ and $|t|<1$. Put $F={\mathbb{Q}}(q,t)$ and ${\mathbb{T}}^n=\{\bz =(z_1,\dots,z_n) \ | \ |z_i|=1 \ (1 \le i \le n)\}$. Denote by $F[x_1,\dots,x_
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: 'We generalize the concept of quasiparticle for one-dimensional (1D) interacting electronic systems. The $\uparrow $ and $\downarrow $ quasiparticles recombine the pseudoparticle colors $c$ and $s$ (charge and spin at zero magnetic field) and are constituted by one many-pseudoparticle [*topological momenton*]{} and one or two pseudoparticles. These excitations cannot be separated. We consider the case of the Hubbard chain. We show that the low-energy electron – quasiparticle transformation has a singular charater which justifies the perturbative and non-perturbative nature of the quantum problem in the pseudoparticle and electronic basis, respectively. This follows from the absence of zero-energy electron – quasiparticle overlap in 1D. The existence of Fermi-surface quasiparticles both in 1D and three dimensional (3D) many-electron systems suggests there existence in quantum liquids in dimensions 1$<$D$<$3. However, whether the electron – quasiparticle overlap can vanish in D$>$1 or whether it becomes finite as soon as we leave 1D remains an unsolved question.'
author:
- 'J. M. P. Carmelo$^{1}$ and A. H. Castro Neto$^{2}$'
---
= 10000
Electrons, pseudoparticles, and quasiparticles in the\
one-dimensional many-electron problem
$^{1}$ Department of Physics, University of Évora, Apartado 94, P-7001 Évora Codex, Portugal\
and Centro de Física das Interacções Fundamentais, I.S.T., P-1096 Lisboa Codex, Portugal
$^{2}$ Department of Physics, University of California, Riverside, CA 92521
INTRODUCTION
============
The unconventional electronic properties of novel materials such as the superconducting coper oxides and synthetic quasi-unidimensional conductors has attracted much attention to the many-electron problem in spatial dimensions 1$\leq$D$\leq$3. A good understanding of [*both*]{} the different and common properties of the 1D and 3D many-electron problems might provide useful indirect information on quantum liquids in dimensions 1$<$D$<$3. This is important because the direct study of the many-electron problem in dimensions 1$<$D$<$3 is of great complexity. The nature of interacting electronic quantum liquids in dimensions 1$<$D$<$3, including the existence or non existence of quasiparticles and Fermi surfaces, remains an open question of crucial importance for the clarification of the microscopic mechanisms behind the unconventional properties of the novel materials.
In 3D the many-electron quantum problem can often be described in terms of a one-particle quantum problem of quasiparticles [@Pines; @Baym], which interact only weakly. This Fermi liquid of quasiparticles describes successfully the properties of most 3D metals, which are not very sensitive to the presence of electron-electron interactions. There is a one to one correspondence between the $\sigma $ quasiparticles and the $\sigma $ electrons of the original non-interacting problem (with $\sigma =\uparrow \, , \downarrow$). Moreover, the coherent part of the $\sigma $ one-electron Green function is quite similar to a non-interacting Green function except that the bare $\sigma $ electron spectrum is replaced by the $\sigma $ quasiparticle spectrum and for an electron renormalization factor, $Z_{\sigma }$, smaller than one and such that $0<Z_{\sigma }<1$. A central point of Fermi-liquid theory is that quasiparticle - quasihole processes describe exact low-energy and small-momentum Hamiltonian eigenstates and “adding” or “removal” of one quasiparticle connects two exact ground states of the many-electron Hamiltonian.
On the other hand, in 1D many-electron systems [@Solyom; @Haldane; @Metzner], such as the hUBbard chain solvable by Bethe ansatz (BA) [@Bethe; @Yang; @Lieb; @Korepinrev], the $\sigma $ electron renormalization factor, $Z_{\sigma }$, vanishes [@Anderson; @Carmelo95a]. Therefore, the many-particle problem is not expected to be descibed in terms of a one-particle problem of Fermi-liquid quasiparticles. Such non-perturbative electronic problems are usually called Luttinger liquids [@Haldane]. In these systems the two-electron vertex function at the Fermi momentum diverges in the limit of vanishing excitation energy [@Carmelo95a]. In a 3D Fermi liquid this quantity is closely related to the interactions of the quasiparticles [@Pines; @Baym]. Its divergence seems to indicate that there are no quasiparticles in 1D interacting electronic systems. A second possibility is that there are quasiparticles in the 1D many-electron problem but without overlap with the electrons in the limit of vanishing excitation energy.
While the different properties of 1D and 3D many-electron problems were the subject of many Luttinger-liquid studies in 1D [@Solyom; @Haldane; @Metzner], the characterization of their common properties is also of great interest because the latter are expected to be present in dimensions 1$<$D$<$3 as well. One example is the Landau-liquid character common to Fermi liquids and some Luttinger liquids which consists in the generation of the low-energy excitations in terms of different momentum-occupation configurations of anti-commuting quantum objects (quasiparticles or pseudoparticles) whose forward-scattering interactions determine the low-energy properties of the quantum liquid. This generalized Landau-liquid theory was first applied in 1D to contact-interaction soluble problems [@Carmelo90] and shortly after also to $1/r^2$-interaction integrable models [@Haldane91]. Within this picture the 1D many-electron problem can also be described in terms of weakly interacting “one-particle” objects, the pseudoparticles, which, however, have no one-to-one correspondence with the electrons, as is shown in this paper.
In spite of the absence of the one to one principle in what concerns single pseudoparticles and single electrons, following the studies of Refs. [@Carmelo90; @Carmelo91b; @Carmelo92] a generalized adiabatic principle for small-momentum pseudoparticle-pseudohole and electron-hole excitations was introduced for 1D many-electron problems in Refs. [@Carmelo92b]. The pseudoparticles of 1D many-electron systems show other similarities with the quasiparticles of a Fermi liquid, there interactions being determined by [*finite*]{} forward-scattering $f$ functions [@Carmelo91b; @Carmelo92; @Carmelo92b]. At constant values of the electron numbers this description of the quantum problem is very similar to Fermi-liquid theory, except for two main differences: (i) the $\uparrow $ and $\downarrow $ quasiparticles are replaced by the $c$ and $s$ pseudoparticles [@Carmelo93; @Carmelo94; @Carmelo94b; @Carmelo94c; @Carmelo95], and (ii) the discrete pseudoparticle momentum (pseudomomentum) is of the usual form $q_j={2\pi\over {N_a}}I_j^{\alpha}$ but the numbers $I_j^{\alpha}$ (with $\alpha =c,s$) are not always integers. They are integers or half integers depending on whether the number of particles in the system is even or odd. This plays a central role in the present quasiparticle problem. The connection of these perturbative pseudoparticles to the non-perturbative 1D electronic basis remains an open problem. By perturbative we mean here the fact that the two-pseudoparticle $f$ functions and forward-scattering amplitudes are finite [@Carmelo92b; @Carmelo94], in contrast to the two-electron vertice functions.
The low-energy excitations of the Hubbard chain at constant electron numbers and in a finite magnetic field and chemical potential were shown [@Carmelo91b; @Carmelo92; @Carmelo92b; @Carmelo94; @Carmelo94b; @Carmelo94c] to be $c$ and $s$ pseudoparticle-pseudohole processes relative to the canonical-ensemble ground state. This determines the $c$ and $s$ low-energy separation [@Carmelo94c], which at zero magnetization leads to the so called charge and spin separation. In this paper we find that in addition to the above pseudoparticle-pseudohole excitations there are also Fermi-surface [*quasiparticle*]{} transitions in the 1D many-electron problem. Moreover, it is the study of such quasiparticle which clarifies the complex and open problem of the low-energy electron – pseudoparticle transformation.
As in 3D Fermi liquids, the quasiparticle excitation is a transition between two exact ground states of the interacting electronic problem differing in the number of electrons by one. When one electron is added to the electronic system the number of these excitations [*also*]{} increases by one. Naturally, its relation to the electron excitation will depend on the overlap between the states associated with this and the quasiparticle excitation and how close we are in energy from the initial interacting ground state. Therefore, in order to define the quasiparticle we need to understand the properties of the actual ground state of the problem as, for instance, is given by its exact solution via the BA. We find that in
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: |
In this work, we apply the factorization technique to the Benjamin-Bona-Mahony like equations in order to get travelling wave solutions. We will focus on some special cases for which $m\neq n$, and we will obtain these solutions in terms of Weierstrass functions.
Email: kuru@science.ankara.edu.tr
title: 'Travelling wave solutions of BBM-like equations by means of factorization'
---
Ş. Kuru\
[*Department of Physics, Faculty of Science, Ankara University, 06100 Ankara, Turkey*]{}
Introduction
============
In this paper, we will consider the Benjamin-Bona-Mahony (BBM) [@benjamin] like equation ($B(m,n)$) with a fully nonlinear dispersive term of the form $$u_{t}+u_{x}+a\,(u^m)_x-(u^n)_{xxt}=0, \quad\quad m,\,n>1,\,\,m \neq
n\, .\label{1.3}$$ This equation is similar to the nonlinear dispersive equation $K(m,n)$, $$u_{t}+(u^m)_x+(u^n)_{xxx}=0, \quad\quad m>0,\,1<n\leq3 \label{1.2}$$ which has been studied in detail by P. Rosenau and J.M. Hyman [@rosenau]. In the literature there are many studies dealing with the travelling wave solutions of the $K(m,n)$ and $B(m,n)$ equations, but in general they are restricted to the case $m=n$ [@rosenau; @rosenau1; @wazwaz; @wazwaz1; @wazwaz2; @wazwaz3; @wazwaz5; @taha; @ludu; @wazwaz4; @yadong; @wang; @kuru]. When $m\neq n$, the solutions of $K(m,n)$ were investigated in [@rosenau; @rosenau1]. Our aim here is just to search for solutions of the equations $B(m,n)$, with $m\neq n$, by means of the factorization method.
We remark that this method [@pilar1; @pilar; @Perez; @pilar2], when it is applicable, allows to get directly and systematically a wide set of solutions, compared with other methods used in the BBM equations. For example, the direct integral method used by C. Liu [@liu] can only be applied to the $B(2,1)$ equation. However, the factorization technique can be used to more equations than the direct integral method and also, in some cases, it gives rise to more general solutions than the sine-cosine and the tanh methods [@wazwaz4; @yadong; @wazwaz6]. This factorization approach to find travelling wave solutions of nonlinear equations has been extended to third order nonlinear ordinary differential equations (ODE’s) by D-S. Wang and H. Li [@li].
When we look for the travelling wave solutions of Eq. (\[1.3\]), first we reduce the form of the $B(m,n)$ equation to a second order nonlinear ODE and then, we can immediately apply factorization technique. Here, we will assume $m \neq n$, since the case $m = n$ has already been examined in a previous article following this method [@kuru].
This paper is organized as follows. In section 2 we introduce factorization technique for a special type of the second order nonlinear ODE’s. Then, we apply straightforwardly the factorization to the related second order nonlinear ODE to get travelling wave solutions of $B(m,n)$ equation in section 3. We obtain the solutions for these nonlinear ODE’s and the $B(m,n)$ equation in terms of Weierstrass functions in section 4. Finally, in section 5 we will add some remarks.
Factorization of nonlinear second order ODE’s
=============================================
Let us consider, the following nonlinear second order ODE $$\label{9}
\frac{d^2 W}{d \theta^2}-\beta \frac{d W}{d \theta}+F(W)=0$$ where $\beta$ is constant and $F(W)$ is an arbitrary function of $W$. The factorized form of this equation can be written as $$\label{10}
\left[\frac{d}{d \theta}-f_2(W,\theta)\right]\left[\frac{d}{d
\theta}-f_1(W,\theta)\right] W(\theta)=0\,.$$ Here, $f_1$ and $f_2$ are unknown functions that may depend explicitly on $W$ and $\theta$. Expanding (\[10\]) and comparing with (\[9\]), we obtain the following consistency conditions $$\label{12}
f_1f_2=\frac{F(W)}{W}+\frac{\partial f_1}{\partial \theta}, \qquad
f_2+\frac{\partial(W f_1)}{\partial W}=\beta.$$ If we solve (\[12\]) for $f_{1}$ or $f_{2}$, it will supply us to write a compatible first order ODE $$\label{14}
\left[\frac{d}{d \theta}-f_1(W,\theta)\right] W(\theta)=0$$ that provides a solution for the nonlinear ODE (\[9\]) [@pilar1; @pilar; @Perez; @pilar2]. In the applications of this paper $f_{1}$ and $f_{2}$ will depend only on $W$.
Factorization of the BBM-like equations
========================================
When Eq. (\[1.3\]) has the travelling wave solutions in the form $$\label{15}
u(x,t)=\phi(\xi),\quad\quad \xi=hx+wt$$ where $h$ and $w$ are real constants, substituting (\[15\]) into (\[1.3\]) and after integrating, we get the reduced form of Eq. (\[1.3\]) to the second order nonlinear ODE $$\label{16}
(\phi^n)_{\xi\xi}-A\,\phi-B\,\phi^m+D=0\,.$$ Notice that the constants in Eq. (\[16\]) are $$\label{17}
A=\frac{h+w}{h^2\,w},\quad\quad B=\frac{a}{h\,w},\quad\quad
D=\frac{R}{h^2\,w}$$ and $R$ is an integration constant. Now, if we introduce the following natural transformation of the dependent variable $$\label{18}
\phi^n(\xi)=W(\theta),\quad\quad\xi=\theta$$ Eq. (\[16\]) becomes $$\label{19}
\frac{d^2 W}{d \theta^2}-A\,W^{\frac{1}{n}}-B\,W^{\frac{m}{n}}+D=0.$$ Now, we can apply the factorization technique to Eq. (\[19\]). Comparing Eq. (\[9\]) and Eq. (\[19\]), we have $\beta=0$ and $$\label{20}
F(W)=-(A\,W^{\frac{1}{n}}+B\,W^{\frac{m}{n}}-D)\,.$$ Then, from (\[12\]) we get only one consistency condition $$\label{23}
f_1^2+f_1\,W\frac{df_1}{dW}-A\,W^{\frac{1-n}{n}}-B\,
W^{\frac{m-n}{n}}+D\,W^{-1}=0\,$$ whose solutions are $$\label{24}
f_1(W)=\pm\frac{1}{W}\sqrt{\frac{2\,n\,A}{n+1}\,W^{\frac{n+1}{n}}+
\frac{2\,n\,B}{m+n}\,W^{\frac{m+n}{n}}-2\, D\,W+C}\,$$ where $C$ is an integration constant. Thus, the first order ODE (\[14\]) takes the form$$\label{25}
\frac{dW}{d
\theta}\mp\sqrt{\frac{2\,n\,A}{n+1}\,W^{\frac{n+1}{n}}+\frac{2\,n\,B}{m+n}\,W^{\frac{m+n}{n}}-2\,
D\,W+C}=0\,.$$ In order to solve this equation for $W$ in a more general way, let us take $W$ in the form $W=\varphi^p,\,p\neq0,1$, then, the first order ODE (\[25\]) is rewritten in terms of $\varphi$ as $$\label{26}
(\frac{d\varphi}{d \theta})^2=
\frac{2\,n\,A}{p^2\,(n+1)}\,\varphi^{p(\frac{1-n}{n})+2}+
\frac{2\,n\,B}{p^2\,(m+n)}\,\varphi^{p(\frac{m-n}{n})+2}-\frac{2\,D}{p^2}\,\varphi^{2-p}
+\frac{C}{p^2}\,\varphi^{2-2\,p}\,.$$ If we want to guarantee the integrability of (\[26\]), the
|
{
"pile_set_name": "ArXiv"
}
|
---
author:
- 'Dimitrios A. Gouliermis'
- Stefan Schmeja
- Volker Ossenkopf
- 'Ralf S. Klessen'
- 'Andrew E. Dolphin'
title: Hierarchically Clustered Star Formation in the Magellanic Clouds
---
Method: The identification of stellar clusters {#sec:1}
==============================================
For the investigation of the clustering behavior of stars it is necessary to thoroughly characterize distinct concentrations of stars, which can only be achieved by the accurate identification of individual stellar clusters. Considering the importance of this process, different identification methods were developed, which can be classified in two families. The first, represented by [*friend of friend*]{} algorithms and [*cluster analysis*]{} techniques, e.g., [@battinelli96], are designed for limited samples of observed stars, and thus are based on linking individual stars into coherent stellar groups. These methods are recently superseded by [*minimum spanning trees*]{}, e.g., [@bastian09]. The second family of identification codes, represented by [*nearest-neighbors*]{} and [*star-counts*]{}, make use of surface stellar density maps constructed from rich observed stellar samples. Distinct stellar systems are identified as statistically significant over-densities in respect to the average stellar density in the observed regions, e.g., [@gouliermis10]. Tests on artificial clusters of various density gradients and shapes showed that the latter (density) techniques are more robust in detecting real stellar concentrations, provided that rich stellar samples are available [@schmeja11]. A schematic representation of stellar density maps constructed with star-counts is shown in Fig. \[fig:1\].
![Schematic of the star-count process. (a) The chart of an observed stellar sample. (b) The corresponding stellar density map, after counting stars in quadrilateral grid of elements (pixels) of size $1.8\arcsec$ each, and after filtering the map with a Gaussian of FWHM$\simeq2.8$px ($\sim$5). (c) The corresponding isodensity contour map. Isopleths at levels [ -2.truept]{}3$\sigma$ are indicated with white lines. \[fig:1\]](fig1.ps)
![Isodensity contour map from star-counts of the young bright main-sequence and faint PMS populations identified with HST/ACS in the region of NGC 346 in the SMC. Lines represent isopleths of significance [ -2.truept]{}$1\sigma$. Apart from the dominating central large stellar aggregate, there are peripheral young sub-clusters, revealed as statistically important stellar concentrations. The central aggregate, denoted by the 1$\sigma$ isopleth, encompass various distinct sub-groups, which appear at higher density thresholds. NGC 346 itself appears at [ -2.truept]{}3$\sigma$ significance. \[fig:2\]](fig2.ps)
Data: Stellar clustering in the region NGC 346/N66 {#sec:2}
==================================================
One of the most prominent bright stellar systems in the Small Magellanic Cloud (SMC) is the stellar association NGC 346, related to the region LHA 115-N66 [@henize56], the brightest in this galaxy. This system appears in partially-resolved observations form the ground as a single stellar concentration, but recent imaging with the [*Advanced Camera for Surveys*]{} onboard the Hubble Space Telescope (HST) allowed the detection of smaller sub-clusters within the boundaries of the nebula. The images were collected within the HST GO Program 10248 and were retrieved from the HST Data Archive. Their photometry demonstrated that the faint young stellar populations in the region are still in their pre–main-sequence (PMS) phase, and revealed a plethora of sub-solar PMS stars [@gouliermis06]. Our [*nearest-neighbor*]{} cluster analysis of the observed young stellar populations, i.e., the bright main-sequence (down to $m_{555} {\ \raise
-2.truept\hbox{\rlap{\hbox{$\sim$}}\raise5.truept\hbox{$<$}\ }}21$) and the faint PMS stars, revealed a significant number of smaller, previously unresolved, young stellar sub-clusters [@schmeja09]. This clustering behavior of young stars in NGC 346 is further demonstrated here by the stellar density contour map of Fig \[fig:2\], constructed with star-counts.
Results: Hierarchical clustering of young stars {#sec:3}
===============================================
The map of Fig. \[fig:2\] shows significant sub-structure, in particular within the 1$\sigma$ boundaries of the central dominant stellar aggregate. This structuring behavior indicates hierarchy. The minimum spanning tree (MST) of the young stars in the whole region allows to determine the statistical parameter, introduced by [@cw04]. This parameter is a measure of the fractal dimension $D$ of a stellar group, permitting to distinguish between centrally concentrated clusters and hierarchical clusters with fractal substructure. The application of the MST to our data shows that the region NGC 346/N66 is highly hierarchical with a that corresponds to a fractal dimension $D \simeq 2.5$.
Constructing surface stellar density maps allows us to further characterize the clustering behavior of stars with the application of tools, which are originally designed for the study of the structuring of the interstellar medium (ISM), as observed at far-infrared or longer wavelengths. The so-called [*dendrograms*]{} are used for the visualization of hierarchy through structural trees [@rosolowsky08]. The dendrogram of the stellar density map of NGC 346 demonstrates that the observed hierarchy is mostly due to the substructure in the dominant stellar aggregate. The $\Delta$-variance analysis [@stutzki98; @ossenkopf08] is a robust structure analysis method that measures the amount of structure on a given scale $l$. In principle the $\Delta$-variance is directly related to the power spectrum of the map, and thus for a power law spectrum of index $-\beta$, $\Delta$-variance also follows a power law, $\displaystyle
\sigma_\Delta^2 \propto l^\alpha$, with $\alpha={\beta-2}$. The application of the $\Delta$-variance analysis on the surface stellar density map of NGC 346 verifies that indeed the clustering of the young stars in the region is self-similar (Fig. \[fig:3\]), with a spectral index $\beta \simeq 2.8$, corresponding to a fractal dimension $D=2.6$ of the corresponding fractional Brownian motion structure [@stutzki98], similar to that previously derived for Galactic molecular clouds. Self-similarity appears to brake, i.e., we find different hierarchical properties for the short-range scaling and the behavior at the overall scale of the region, at length-scales $l \geq 25$px, corresponding to physical scales of $\sim$40($\sim 11$pc at the distance of the SMC).
![The $\Delta$-variance spectrum of the surface stellar density map of the entire region of NGC 346/N66. This analysis shows that the young stellar populations in this region are hierarchically structured up to length-scales of $\sim$40. The spectral index $\beta$ is determined from the fit of the spectrum for data between lags 4and 13(indicated by the gray shaded area). The dashed line provides the used virtual beamsize (5). \[fig:3\]](fig3.ps)
D.A.G., S.S. and V.O. kindly acknowledge support by the German Research Foundation (DFG) through grants GO 1659/3-1, SFB 881 and OS 177/2-1 respectively. Based on observations made with the NASA/ESA [*Hubble Space Telescope*]{}, obtained from the data archive at the Space Telescope Science Institute (STScI). STScI is operated by the Association of Universities for Research in Astronomy, Inc. under NASA contract NAS 5-26555.
[99.]{} Bastian, N., et al. 2009. Mon. Not. R. Astron. Soc. 392, 868 Battinelli, P., Efremov, Y., & Magnier, E. A. 1996. Astron. Astrophys. 314, 51 Cartwright, A., & Whitworth, A. P. 2004. Mon. Not. R. Astron. Soc. 348, 589 Gouliermis, D. A., et al. 2006. Astroph. J. Suppl. Ser. 166, 549 Gouliermis, D. A., et al. 2010. Astroph. J. 725, 1717 Henize, K. G. 1956. Astroph. J. Suppl. Ser. 2, 315 Ossenkopf, V., Krips, M., & Stutzki, J. 2008. Astron. Astrophys. 485, 917 Rosolowsky, E. W., et al. 2008. Astroph. J. 679, 1338 Schmeja, S., Gouliermis, D. A., & Klessen, R. S. 2009. Astroph. J. 694, 367 Schmeja, S. 2011, Astronomische Nachrichten, 332, 172 Stutzki J., et al. 1998. Astron. Astrophys. 336, 697
|
{
"pile_set_name": "ArXiv"
}
|
---
bibliography:
- 'references-Forstneric.bib'
---
[**Holomorphic embeddings and immersions\
of Stein manifolds: a survey**]{}
[**Franc Forstnerič**]{}
> [**Abstract**]{} In this paper we survey results on the existence of holomorphic embeddings and immersions of Stein manifolds into complex manifolds. Most of them pertain to proper maps into Stein manifolds. We include a new result saying that every continuous map $X\to Y$ between Stein manifolds is homotopic to a proper holomorphic embedding provided that $\dim Y>2\dim X$ and we allow a homotopic deformation of the Stein structure on $X$.
>
> [**Keywords**]{} Stein manifold, embedding, density property, Oka manifold
>
> [**MSC (2010):**]{}
>
> 32E10, 32F10, 32H02, 32M17, 32Q28, 58E20, 14C30
Introduction {#sec:intro}
============
In this paper we review what we know about the existence of holomorphic embeddings and immersions of Stein manifolds into other complex manifolds. The emphasis is on recent results, but we also include some classical ones for the sake of completeness and historical perspective. Recall that Stein manifolds are precisely the closed complex submanifolds of Euclidean spaces ${\mathbb{C}}^N$ (see Remmert [@Remmert1956], Bishop [@Bishop1961AJM], and Narasimhan [@Narasimhan1960AJM]; cf. Theorem \[th:classical\]). Stein manifolds of dimension $1$ are open Riemann surfaces (see Behnke and Stein [@BehnkeStein1949]). A domain in ${\mathbb{C}}^n$ is Stein if and only if it is a domain of holomorphy (see Cartan and Thullen [@CartanThullen1932]). For more information, see the monographs [@Forstneric2017E; @GrauertRemmert1979; @GunningRossi2009; @HormanderSCV].
In §\[sec:Euclidean\] we survey results on the existence of proper holomorphic immersions and embeddings of Stein manifolds into Euclidean spaces. Of special interest are the minimal embedding and immersion dimensions. Theorem \[th:EGS\], due to Eliashberg and Gromov [@EliashbergGromov1992AM] (1992) and Schürmann [@Schurmann1997] (1997), settles this question for Stein manifolds of dimension $>1$. It remains an open problem whether every open Riemann surface embeds holomorphically into ${\mathbb{C}}^2$; we describe its current status in §\[ss:RS\]. We also discuss the use of holomorphic automorphisms of Euclidean spaces in the construction of wild holomorphic embeddings (see §\[ss:wild\] and §\[ss:complete\]).
It has recently been discovered by Andrist et al. [@AndristFRW2016; @AndristWold2014; @Forstneric-immersions] that there is a big class of Stein manifolds $Y$ which contain every Stein manifold $X$ with $2\dim X< \dim Y$ as a closed complex submanifold (see Theorem \[th:density\] ). In fact, this holds for every Stein manifold $Y$ enjoying Varolin’s [*density property*]{} [@Varolin2000; @Varolin2001]: the Lie algebra of all holomorphic vector fields on $Y$ is spanned by the ${\mathbb{C}}$-complete vector fields, i.e., those whose flow is an action of the additive group $({\mathbb{C}},+)$ by holomorphic automorphisms of $Y$ (see Definition \[def:density\]). Since the domain $({\mathbb{C}}^*)^n$ enjoys the volume density property, we infer that every Stein manifold $X$ of dimension $n$ admits a proper holomorphic immersion to $({\mathbb{C}}^*)^{2n}$ and a proper pluriharmonic map into ${\mathbb{R}}^{2n}$ (see Corollary \[cor:harmonic\]). This provides a counterexample to the Schoen-Yau conjecture [@SchoenYau1997] for any Stein source manifold (see §\[ss:S-Y\]).
The class of Stein manifolds (in particular, of affine algebraic manifolds) with the density property is quite big and contains most complex Lie groups and homogeneous spaces, as well as many nonhomogeneus manifolds. This class has been the focus of intensive research during the last decade; we refer the reader to the recent surveys [@KalimanKutzschebauch2015] and [@Forstneric2017E §4.10]. An open problem posed by Varolin [@Varolin2000; @Varolin2001] is whether every contractible Stein manifold with the density property is biholomorphic to a Euclidean space.
In §\[sec:PSC\] we recall a result of Drinovec Drnovšek and the author [@DrinovecForstneric2007DMJ; @DrinovecForstneric2010AJM] to the effect that every smoothly bounded, strongly pseudoconvex Stein domain $X$ embeds properly holomorphically into an arbitrary Stein manifold $Y$ with $\dim Y>2\dim X$. More precisely, every continuous map $\overline X\to Y$ which is holomorphic on $X$ is homotopic to a proper holomorphic embedding $X{\hookrightarrow}Y$ (see Theorem \[th:BDF2010\]). The analogous result holds for immersions if $\dim Y\ge 2\dim X$, and also for every $q$-complete manifold $Y$ with $q\in \{1,\ldots,\dim Y-2\dim X+1\}$, where the Stein case corresponds to $q=1$. This summarizes a long line of previous results. In §\[ss:Hodge\] we mention a recent application of these techniques to the [*Hodge conjecture*]{} for the highest dimensional a priori nontrivial cohomology group of a $q$-complete manifold [@FSS2016]. In §\[ss:complete\] we survey recent results on the existence of [*complete*]{} proper holomorphic embeddings and immersions of strongly pseudoconvex domains into balls. Recall that a submanifold of ${\mathbb{C}}^N$ is said to be [*complete*]{} if every divergent curve in it has infinite Euclidean length.
In §\[sec:soft\] we show how the combination of the techniques from [@DrinovecForstneric2007DMJ; @DrinovecForstneric2010AJM] with those of Slapar and the author [@ForstnericSlapar2007MRL; @ForstnericSlapar2007MZ] can be used to prove that, if $X$ and $Y$ are Stein manifolds and $\dim Y>2\dim X$, then every continuous map $X\to Y$ is homotopic to a proper holomorphic embedding up to a homotopic deformation of the Stein structure on $X$ (see Theorem \[th:soft\]). The analogous result holds for immersions if $\dim Y\ge 2\dim X$, and for $q$-complete manifolds $Y$ with $q\le \dim Y-2\dim X+1$. A result in a similar vein, concerning proper holomorphic embeddings of open Riemann surfaces into ${\mathbb{C}}^2$ up to a deformation of their conformal structures, is due to Alarcón and L[ó]{}pez [@AlarconLopez2013] (a special case was proved in [@CerneForstneric2002]); see also Ritter [@Ritter2014] for embeddings into $({\mathbb{C}}^*)^2$.
I have not included any topics from Cauchy-Riemann geometry since it would be impossible to properly discuss this major subject in the present survey of limited size and with a rather different focus. The reader may wish to consult the recent survey by Pinchuk et al. [@Pinchuk2017], the monograph by Baouendi et al. [@Baouendi1999] from 1999, and my survey [@Forstneric1993MN] from 1993. For a new direction in this field, see the papers by Bracci and Gaussier [@BracciGaussier2016X; @BracciGaussier2017X].
We shall be using the following notation and terminology. Let ${\mathbb{N}}=\{1,2,3,\ldots\}$. We denote by ${\mathbb D}=\{z\in {\mathbb{C}}:|z|<1\}$ the unit disc in ${\mathbb{C}}$, by ${\mathbb D}^n\subset{\mathbb{C}}^n$ the Cartesian product of $n$ copies of ${\mathbb D}$ (the unit polydisc in ${\mathbb{C}}^n$), and by ${\mathbb{B}}^n=\{z=(z_1,\ldots,z_n)\in{\mathbb{C}}^n : |z|^2 = |z_1|^2+\cdots +|z_n|^2<1\}$ the unit ball in ${\mathbb{C}}^n$. By ${\mathcal{O}}(X)$ we denote the algebra of all holomorphic functions on a complex manifold $X$, and by ${\mathcal{O}}(X,Y)$ the space of all holomorphic maps $X\to Y$ between a pair of complex manifolds; thus ${\mathcal{O}}(X)={\mathcal{O}}(X,{\mathbb{C}})$. These spaces carry the compact-open topology. This topology can be defined by a complete metric which renders them Baire spaces; in particular, ${\mathcal{O}}(X)$ is a Fréchet algebra. (See [@Forstneric2017E p. 5] for more details.) A compact set $K$ in a complex manifold $X$ is said to be [*${\mathcal{O}}(X)$-convex*]{} if $K={\widehat
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: 'We report the growth of Nb$_{2}$Pd$_{0.73}$S$_{5.7}$ superconducting single crystal fibers via slow cooling solid state reaction method. Superconducting transition temperature ($T_{c}\sim6.5$K) is confirmed from magnetization and transport measurements. A comparative study is performed for determination of superconducting anisotropy, $\Gamma$, via conventional method (by taking ration of two superconducting parameters) and scaling approach method. Scaling approach, defined within the framework of the Ginzburg-Landau theory is applied to the angular dependent resistivity measurements to estimate the anisotropy. The value of $\Gamma$ close to $T_{c}$ from scaling approach is found to be $\sim2.5$ that is slight higher compare to conventional approach ($\sim2.2$). Further, variation of anisotropy with temperature suggests that it is a type of multi-band superconductor.'
address: '$^{\mbox{a}}$ Department of physics, Indian Institute of Technology Bombay, Mumbai-400076 India'
author:
- 'Anil K. Yadav$^{\mbox{a,b}}$'
- 'Himanshu Sharma$^{\mbox{a}}$'
- 'C. V. Tomy$^{\mbox{a}}$'
- 'Ajay D. Thakur$^{\mbox{c}}$'
title: 'Growth and angular dependent resistivity of Nb$_{2}$Pd$_{0.73}$S$_{5.7}$ superconducting state single crystals fiber'
---
introduction
============
Ternary chalcogenide of non-superconducting compound Nb$_{2}$Pd$_{0.81}$Se$_{5}$ turns into a superconductor with superconducting transition temperature $T_{c}\sim6.5$K when Se is replaced with S [\[]{}1[\]]{}. This superconductor has caused a lot of interest to research community due to its extremely large upper critical fields amongst the known Nb based superconductors and shown a possibility to grow long flexible superconducting fibers [\[]{}1,2[\]]{}. Structurally, this compound crystallizes in the monoclinic structure with symmetry $C2/m$ space group [\[]{}1,2,3[\]]{}. Its structure comprises laminar sheets, stacked along the b-axis, consisting of Pb, Nb and S atoms. Each sheet contains two unique building blocks of NbS$_{6}$ and NbS$_{7}$ atoms inter-linked by the Pd-atoms [\[]{}1,3,4[\]]{}. Yu *et al.*, have constructed the superconducting phase diagram of Nb$_{2}$Pd$_{1-x}$S$_{5\pm\delta}$ ($0.6<x<1$ ) single crystal fibers by varying composition of Pd and S and found maximum $T_{c}\sim7.43$K in Nb$_{2}$Pd$_{1.1}$S$_{6}$ stoichiometry compound [\[]{}2[\]]{}. One of the important parameter which needs to be determine precisely for this compound is the anisotropy ($\Gamma$) as it shown extremely large direction dependent upper critical field [\[]{}1[\]]{}. In the conventional approach, the anisotropy is determined as ration of two superconducting parameters (such as band dependent effective masses, penetration depth, upper critical fields etc.) in two orientations w.r.t. the crystallographic axes and applied magnetic field [\[]{}5[\]]{}. Zhang *et al.*, [\[]{}1[\]]{} have determined the temperature dependent anisotropy in this compound using the above conventional method by taking the ratio of $H_{c2}(T)$ in two orientations. However, in this case, estimation of $H_{c2}(0)$ is subject to different criteria and formalism which may introduce some uncertainty in the anisotropy ($\Gamma$) calculation [\[]{}6[\]]{}. Blatter *et al.*, have given a simple alternate way to estimate the anisotropy of a superconductor, known as the scaling approach [\[]{}7[\]]{}. In this approach, any anisotropic data can be changed into isotropic form by using some scaling rule in which only one parameter has to adjust for which all isotropic curves collapse into single curve, that adjusted parameter is anisotropy of superconductor. Thus its limits the uncertainty in the determination of $\Gamma$ as compared to the conventional approach. Employing scaling approach, Wen et al., have estimated the anisotropy of several Fe-based superconductors such as NdFeAsO$_{0.82}$F$_{0.18}$ [\[]{}8[\]]{}, Ba$_{1-x}$K$_{x}$Fe$_{2}$As$_{2}$ [\[]{}6[\]]{} and Rb$_{0.8}$Fe$_{2}$Se$_{2}$ [\[]{}9[\]]{}. Shahbazi *et al.*, have also performed similar studies on Fe$_{1.04}$Se$_{0.6}$Te$_{0.4}$ [\[]{}10[\]]{} and BaFe$_{1.9}$Co$_{0.1}$As$_{2}$ [\[]{}11[\]]{} single crystals. In this paper, we report the anisotropy estimation of Nb$_{2}$Pd$_{0.73}$S$_{5.7}$ single crystals via conventional and scaling approach methods near $T_{c}$. We also provide further evidence that the bulk superconducting anisotropy is not universally constant, but is temperature dependent down to $T_{c}$.
method
======
Single crystal fibers of Nb$_{2}$Pd$_{0.73}$S$_{5.7}$ were synthesized via slow cooling of the charge in the solid state reaction method, as reported in reference [\[]{}1[\]]{}. Starting raw materials (powder) Nb (99.99%), Pd (99.99%) and S (99.999%) were taken in the stoichiometry ratio of 2:1:6 and mixed in an Ar atmosphere inside a glove box. The well-homogenized powder was sealed in a long evacuated quartz tube and heated to 800ïC with a rate of 10$^{\circ}$C/h. After the reaction for 24 hours at this temperature, the reactants were cooled down at a rate of 2$^{\circ}$C/h to 360$^{\circ}$C, followed by cooling to room temperature by switching the furnace off. As-grown samples look like a mesh of small wires when viewed under an optical microscope. Some part of the as-grown sample was dipped in dilute HNO$_{3}$ to remove the bulk material and to pick up a few fiber rods for further measurements. X-ray diffraction (XRD) was performed on powdered Nb$_{2}$Pd$_{0.73}$S$_{5.7}$ single crystal fibers for structure determination. High energy x-ray diffraction analysis (EDAX) is used to identify the chemical elements and composition. Magnetization measurement was performed using a superconducting quantum interference device - vibrating sample magnetometer (SQUID-VSM, Quantum Design Inc. USA). Angular dependent resistivity was carried out using the resistivity option with horizontal rotator in a physical property measurement system (PPMS) of Quantum Design Inc. USA. Electrical connections were made in four probe configuration using gold wires bonded to the sample with silver epoxy.
Results
=======
Structure analysis
------------------
Figure \[fig1\](a) shows the scanning electron microscope (SEM) image of Nb$_{2}$Pd$_{0.73}$S$_{5.7}$ single crystals fibers. It is clear from the image that the fibers are grown in different shapes and lengths. Figure \[fig1\](b) shows the XRD patterns of powdered Nb$_{2}$Pd$_{0.73}$S$_{5.7}$ single crystals. Rietveld refinement was performed on the powder XRD data using $C2/m$ monoclinic crystal structure of Nb$_{2}$Pd$_{0.81}$Se$_{5}$ as reference in the FullProf suite software. The lattice parameters ($a$= 12.154(1)A, $b$ = 3.283(7)A and $c$ = 15.09(9)A) obtained from the refinement are approximately same as reported earlier in reference [\[]{}1,3[\]]{}, even though the intensities could not be matched perfectly. Peak (200) is found to be the one with the highest intensity even when the XRD was obtained with a bunch of fibers, indicating a preferred crystal plan orientation along the ($l$00) direction in our powdered samples. Similar preferred orientation was also reported for single crystals in reference [\[]{}2[\]]{}. This may be the reason for the discrepancy in the intensities between the observed and the fitted XRD peaks. Further, to confirm the single crystalline nature of the fibers, we have taken the selective area electron diffraction (SAED) pattern of the fibers; a typical pattern is shown in Figure \[fig1\](c). Nicely ordered spotted diffraction pattern confirms the single crystalline nature of the fibers. Figure \[fig1\](d) shows the optical image of a typical cylindrical fiber of diameter $\sim1.2\,\mbox{\ensuremath{\mu}m}$ and of length $\sim1814\,\mbox{\ensuremath{\mu}m},$ which was used for the four probe electrical resistivity measurements (Fig. \[fig1\](e) shows the gold wires and silver paste used for the electrical connections). All chemical elements are found to be present in the compound with slight variation from starting composition in EDAX analysis.
![ \[fig1\] (Color online) (a) SEM image of bunch of single crystal fibers of Nb$_{2}$Pd$_{0.73}$S$_{5.7}$. (b) X-ray diffraction patterns: observed (green), calculated (red) and difference (blue) (c) SAED pattern of a single crystal fiber (
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: 'We study the effects of Supernova (SN) feedback on the formation of galaxies using hydrodynamical simulations in a $\Lambda$CDM cosmology. We use an extended version of the code GADGET-2 which includes chemical enrichment and energy feedback by Type II and Type Ia SN, metal-dependent cooling and a multiphase model for the gas component. We focus on the effects of SN feedback on the star formation process, galaxy morphology, evolution of the specific angular momentum and chemical properties. We find that SN feedback plays a fundamental role in galaxy evolution, producing a self-regulated cycle for star formation, preventing the early consumption of gas and allowing disks to form at late times. The SN feedback model is able to reproduce the expected dependence on virial mass, with less massive systems being more strongly affected.'
---
Introduction
============
Supernova explosions play a fundamental role in galaxy formation and evolution. On one side, they are the main source of heavy elements in the Universe and the presence of such elements substantially enhances the cooling of gas (White & Frenk 1991). On the other hand, SNe eject a significant amount of energy into the interstellar medium. It is believed that SN explosions are responsible of generating a self-regulated cycle for star formation through the heating and disruption of cold gas clouds, as well as of triggering important galactic winds such as those observed (e.g. Martin 2004). Smaller systems are more strongly affected by SN feedback, because their shallower potential wells are less efficient in retaining baryons (e.g. White & Frenk 1991).
Numerical simulations have become an important tool to study galaxy formation, since they can track the joint evolution of dark matter and baryons in the context of a cosmological model. However, this has shown to be an extremely complex task, because of the need to cover a large dynamical range and describe, at the same time, large-scale processes such as tidal interactions and mergers and small-scale processes related to stellar evolution.
One of the main problems that galaxy formation simulations have repeteadly found is the inability to reproduce the morphologies of disk galaxies observed in the Universe. This is generally refered to as the angular momentum problem that arises when baryons transfer most of their angular momentum to the dark matter components during interactions and mergers (Navarro & Benz 1991; Navarro & White 1994). As a result, disks are too small and concentrated with respect to real spirals. More recent simulations which include prescriptions for SN feedback have been able to produce more realistic disks (e.g. Abadi et al. 2003; Robertson et al. 2004; Governato et al. 2007). These works have pointed out the importance of SN feedback as a key process to prevent the loss of angular momentum, regulate the star formation activity and produce extended, young disk-like components.
In this work, we investigate the effects of SN feedback on the formation of galaxies, focusing on the formation of disks. For this purpose, we have run simulations of a Milky-Way type galaxy using an extended version of the code [GADGET-2]{} which includes chemical enrichment and energy feedback by SN. A summary of the simulation code and the initial conditions is given in Section \[simus\]. In Section \[results\] we investigate the effects of SN feedback on galaxy morphology, star formation rates, evolution of specific angular momentum and chemical properties. We also investigate the dependence of the results on virial mass. Finally, in Section \[conclusions\] we give our conclusions.
Simulations {#simus}
===========
We use the simulation code described in Scannapieco et al. (2005, 2006). This is an extended version of the Tree-PM SPH code [GADGET-2]{} (Springel & Hernquist 2002; Springel 2005), which includes chemical enrichment and energy feedback by SN, metal-dependent cooling and a multiphase model for the gas component. Note that our star formation and feedback model is substantially different from that of Springel & Hernquist (2003), but we do include their treatment of UV background.
We focus on the study of a disk galaxy similar to the Milky Way in its cosmological context. For this purpose we simulate a system with $z=0$ halo mass of $\sim 10^{12}$ $h^{-1}$ M$_\odot$ and spin parameter of $\lambda\sim 0.03$, extracted from a large cosmological simulation and resimulated with improved resolution. It was selected to have no major mergers since $z=1$ in order to give time for a disk to form. The simulations adopt a $\Lambda$CDM Universe with the following cosmological parameters: $\Omega_\Lambda=0.7$, $\Omega_{\rm m}=0.3$, $\Omega_{\rm b}=0.04$, a normalization of the power spectrum of $\sigma_8=0.9$ and $H_0=100\ h$ km s$^{-1}$ Mpc$^{-1}$ with $h=0.7$. The particle mass is $1.6\times 10^7$ for dark matter and $2.4\times 10^6$ $h^{-1}$ M$_\odot$ for baryonic particles, and we use a maximum gravitational softening of $0.8\ h^{-1}$ kpc for gas, dark matter and star particles. At $z=0$ the halo of our galaxy contains $\sim 1.2\times 10^5$ dark matter and $\sim 1.5\times 10^5$ baryonic particles within the virial radius.
In order to investigate the effects of SN feedback on the formation of galaxies, we compare two simulations which only differ in the inclusion of the SN energy feedback model. These simulations are part of the series analysed in Scannapieco et al. (2008), where an extensive investigation of the effects of SN feedback on galaxies and a parameter study is performed. In this work, we use the no-feedback run NF (run without including the SN energy feedback model) and the feedback run E-0.7. We refer the interested reader to Scannapieco et al. (2008) for details in the characteristics of these simulations.
Results
=======
In Fig. \[maps\] we show stellar surface density maps at $z=0$ for the NF and E-0.7 runs. Clearly, SN feedback has an important effect on the final morphology of the galaxy. If SN feedback is not included, as we have done in run NF, the stars define a spheroidal component with no disk. On the contrary, the inclusion of SN energy feedback allows the formation of an extended disk component.
![Edge-on stellar surface density maps for the no-feedback (NF, left-hand panel) and feedback (E-0.7, right-hand panel) simulations at $z=0$. The colors span 4 orders of magnitude in projected density, with brighter colors representing higher densities. []{data-label="maps"}](map-NF.eps "fig:"){width="60mm"} ![Edge-on stellar surface density maps for the no-feedback (NF, left-hand panel) and feedback (E-0.7, right-hand panel) simulations at $z=0$. The colors span 4 orders of magnitude in projected density, with brighter colors representing higher densities. []{data-label="maps"}](map-E-0.7.eps "fig:"){width="60mm"}
![Left: Star formation rates for the no-feedback (NF) and feedback (E-0.7) runs. Right: Mass fraction as a function of formation time for stars of the disk and spheroidal components in simulation E-0.7. []{data-label="sfr_stellarage"}](sfr-copen.ps "fig:"){width="70mm"}![Left: Star formation rates for the no-feedback (NF) and feedback (E-0.7) runs. Right: Mass fraction as a function of formation time for stars of the disk and spheroidal components in simulation E-0.7. []{data-label="sfr_stellarage"}](fig6.ps "fig:"){width="64mm"}
The generation of a disk component is closely related to the star formation process. In the left-hand panel of Fig. \[sfr\_stellarage\] we show the star formation rates (SFR) for our simulations. In the no-feedback case (NF), the gas cools down and concentrates at the centre of the potential well very early, producing a strong starburst which feeds the galaxy spheroid. As a result of the early consumption of gas to form stars, the SFR is low at later times. On the contrary, the SFR obtained for the feedback case is lower at early times, indicating that SN feedback has contributed to self-regulate the star formation process. This is the result of the heating of gas and the generation of galactic winds. In this case, the amount of gas available for star formation is larger at recent times and consequently the SFR is higher. In the right-hand panel of Fig. \[sfr\_stellarage\] we show the mass fraction as a function of formation time for stars of the disk and spheroidal components in our feedback simulation (see Scannapieco et al. 2008 for the method used to segregate stars into disk and spheroid). From this plot it is clear that star formation at recent times ($z\lesssim 1$) significantly contributes to the formation of the disk component, while stars formed at early times contribute mainly to the spheroid. In this simulation, $\sim 50$ per cent of the mass of the disk forms since $z=1$. Note that in the no-feedback case, only a few per cent of
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: |
The paper proposes a method for measuring available bandwidth, based on testing network packets of various sizes (Variable Packet Size method, VPS). The boundaries of applicability of the model have been found, which are based on the accuracy of measurements of packet delays, also we have derived a formula of measuring the upper limit of bandwidth. The computer simulation has been performed and relationship between the measurement error of available bandwidth and the number of measurements has been found. Experimental verification with the use of RIPE Test Box measuring system has shown that the suggested method has advantages over existing measurement techniques. *Pathload* utility has been chosen as an alternative technique of measurement, and to ensure reliable results statistics by SNMP agent has been withdrawn directly from the router.\
author:
-
-
title: Simulation technique for available bandwidth estimation
---
Available bandwidth, RIPE Test Box, packet size, end-to-end delay, variable delay component.
Introduction
============
Various real-time applications in the Internet, especially transmission audio and video information, become more and more popular. The major factors defining quality of the service are quality of the equipment (the codec and a video server) and available bandwidth in Internet link. ISP providers should provide the required bandwidth for voice and video applications to guarantee the submission of demanded services in the global network.
In this paper, network path is defined as a sequence of links (hops), which forward packets from the sender to the receiver. There are various definitions for the throughput metrics, but we will use the approaches accepted in [@s5; @s9; @s10].
Two bandwidth metrics that are commonly associated with a path are the capacity $C$ and the available bandwidth $B_{av}$ (see Fig \[f1\]). The [*capacity C*]{} is the maximum IP-layer throughput that the path can provide to a flow, when there is no competing traffic load (cross traffic). The [*available bandwidth*]{} $B_{av}$, on the other hand, is the maximum IP-layer throughput that the path can provide to a flow, given the path’s current cross traffic load. The link with the minimum transmission rate determines the capacity of the path, while the link with the minimum unused capacity limits the available bandwidth. Moreover measuring available bandwidth is important to provide information to network applications on how to control their incoming and outgoing traffic and fairly share the network bandwidth.
![Illustration of throughput metrics[]{data-label="f1"}](il1){height="2.525cm"}
Another related throughput metric is the [*Bulk-Transfer-Capacity*]{} (BTC). BTC of a path in a certain time period is the throughput of a bulk TCP transfer, when the transfer is only limited by the network resources and not by limitations at the end-systems. The intuitive definition of BTC is the expected long-term average data rate (bits per second) of a single ideal TCP implementation over the path in question.
In order to construct a perfect picture of a global network (monitoring and bottlenecks troubleshooting) and develop the standards describing new applications, modern measuring infrastructure should be installed. In this paper we are describing usage of RIPE Test Box measurement system, which is widely used [@s7].
According to [@s7] this system doesn’t measure the available bandwidth, but it collects the numerical values, which characterize key network parameters such as packet delay, jitter, routing path, etc.
In this paper we attempt to provide universal and simple model that allow us to estimate available bandwidth based on received data from RIPE Test Box measurement infrastructure. The method is based on [*Variable Packet Size*]{} (VPS) method and was used in [@s6]. This method allows us to estimate network capacity of a hop $i$ by using connection between the Round-Trip Time (RTT) and packet size $W$.
The model and its applicability
===============================
The well-known expression for throughput metric describing the relation between a network delay and the packet size is Little’s Law [@s13]: $$B_{av}=W/D,
\label{e1}$$ where $B_{av}$ is available bandwidth, $W$ is the size of transmitted packet and $D$ is network packet delay (One Way Delay). This formula is ideal for calculating the bandwidth between two points on the network that are connected without any routing devices. In general case delay value is caused by constant network factors as propagation delay, transmission delay, per-packet router processing time, etc [@s9].
According to [@s1], Little’s Law could be modified with $D^{fixed}$: $$B_{av}=W/(D-D^{fixed}),
\label{e2}$$ where $D^{fixed}$ is [*minimum fixed delay*]{} for the packet size $W$. The difference between the delays $D$ and $D^{fixed}$ is the [*variable delay component*]{} $d_{var}$. In paper [@s3] it was shown that variable delay is exponentially distributed.
Choi [@s2], Hohn [@s12] showed that minimum fixed delay component $D^{fixed}(W)$ for the packet size $W$ is an linear (or affine) function of its size: $$D^{fixed}(W)=W\sum_{i=1}^h 1/C_i + \sum_{i=1}^h \delta_i,
\label{e3}$$ where $C_i$ is capacity of appropriate link and $\delta_i$ is propagation delay. To prove this assumption authors experimentally found the minimum fixed delays for packets of the same size for three different routes and constructed function of dependence of a delay from the packet size $W$.
In order to eliminate minimum fixed delay $D^{fixed}(W)$ from Eqn. (\[e2\]) we are suggesting to test network link with packets of different sizes [@s1], so that the packet size varied at the maximum possible value without possible router fragmentation. Then Eqn. (\[e2\]) could be modified to a suitable form for measuring available bandwidth: $$B_{av}=\frac{W_2-W_1}{D_2-D_1}
\label{e4}$$
This method allows us to find a way to eliminate the measurement limitations of variable delay component $d_{var}$. The variable delay component is the cause rather large measurement errors of other methods, which will be described in the last section of this paper.
Proposed model is quite simple, but it’s still difficult to find accurate measuring infrastructure. The first problem concerns the applicability of the model, i.e., what range of throughput metrics can be measured using with this method. The second issue is number of measurements (group of packets) needed to achieve a given accuracy.
First problem could be solved by using measurement error (based on delay accuracy measurement): $$\eta=\frac{\Delta B}{B}=\frac{2\Delta D}{D_2-D_1},
\label{e5}$$ where $\eta$ is relative error of measurement available bandwidth, $\Delta B$ is absolute error of measurement available bandwidth and $\Delta D$ is precision of measuring the packet delay.
With this expression we can easily find an upper bound $\bar{B}$ for available bandwidth: $$\bar{B}=\frac{W_2-W_1}{2\Delta D}\eta
\label{e6}$$
Thus, with the RIPE Test Box, which allows to find the delay to within 2 microseconds $\Delta D=2\cdot10^{-6}$ second precision, we can measure the available bandwidth to the upper bound $\ensuremath{\bar{B}}=300$ [*Mbps*]{} with relative error $\eta=10\%$. Moreover, if we were using standard utility *ping*, with a relative error $\eta=25\%$ and precision of 1 millisecond $\Delta D=10^{-3}$ second, we could get results for network available bandwidth up to $1.5$ [*Mbps*]{}.
Experimental comparison of different methods
============================================
In this part of the paper we would like to show results based on comparing different methods of measuring available bandwidth by using obtained results of experiments.
The experiment was divided in three stages. In the first stage we have used RIPE Test Box measurement system with two different packet sizes. Number of measurement systems in global measurement infrastructure reaches 80, these points are covering major Internet world’s centers of the Internet, reaching highest density in Europe. The measurement error of packet delay is 2-12 $\mu s$ [@s14]. In order to prepare the experiments, three Test Boxes have been installed in Moscow, Samara and Rostov on Don in Russia during 2006-2008 years in support of RFBR grant 06-07-89074. For further analysis we collected several data sets containing up to 3000 data results in different directions, including Samara - Amsterdam (tt01.ripe.net - tt143.ripe.net). Based on these data, we calculated available bandwidth and dependence of measurement error on the number of measurements (see Fig \[f3\]).
The second stage was comparing data obtained with our method, with the results of traditional methods of throughputs measurement. *Pathload* was selected as a tool that implements a traditional method of measurement product [@s10]. This software is considered one of the best tools to assess the available bandwidth. *Pathload* uses Self-Loading Periodic Streams (SLoPS). It is based on client-server architecture, which is its disadvantage, since you want to install the utility on both hosts. *Pathload* advantage is that it does not require root privileges, as the utility sends only UDP packets.
The results of measurements *
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: 'Wide-area data and algorithms in large power systems are creating new opportunities for implementation of measurement-based dynamic load modeling techniques. These techniques improve the accuracy of dynamic load models, which are an integral part of transient stability analysis. Measurement-based load modeling techniques commonly assume response error is correlated to system or model accuracy. Response error is the difference between simulation output and phasor measurement units (PMUs) samples. This paper investigates similarity measures, output types, simulation time spans, and disturbance types used to generate response error and the correlation of the response error to system accuracy. This paper aims to address two hypotheses: 1) can response error determine the total system accuracy? and 2) can response error indicate if a dynamic load model being used at a bus is sufficiently accurate? The results of the study show only specific combinations of metrics yield statistically significant correlations, and there is a lack of pattern of combinations of metrics that deliver significant correlations. Less than 20% of all simulated tests in this study resulted in statistically significant correlations. These outcomes highlight concerns with common measurement-based load modeling techniques, raising awareness to the importance of careful selection and validation of similarity measures and response output metrics. Naive or untested selection of metrics can deliver inaccurate and misleading results.'
author:
- 'Phylicia Cicilio, and Eduardo Cotilla-Sanchez, [^1][^2]'
bibliography:
- 'ref.bib'
title: 'Evaluating Measurement-Based Dynamic Load Modeling Techniques and Metrics'
---
Introduction
============
The introduction of phasor measurement units (PMUs) and advanced metering infrastructure (AMI) has ushered in the era of big data to electrical utilities. The ability to capture high-resolution data from the electrical grid during disturbances enables the more widespread use of measurement-based estimation techniques for validation of dynamic models such as loads. Transient stability studies use dynamic load models. These studies are key for ensuring electrical grid reliability and are leveraged for planning and operation purposes [@Shetye]. It is imperative that dynamic load models be as representative of the load behavior as possible to ensure that transient stability study results are accurate and useful. However, developing dynamic load models is challenging, as they attempt to represent uncertain and changing physical and human systems in an aggregate model.
Several methods exist for determining load model parameters, such as measurement-based techniques using power systems sensor data [@Kim; @Kontis; @Zhang; @Renmu; @Choi_2; @Ma_2], and methods that use parameter sensitivities and trajectory sensitivities [@Choi; @Kim; @Son; @Ma; @Zhang]. A common practice in measurement-based techniques is to use system response outputs, such as bus voltage magnitude, from PMU data and simulation data and compare the output with a similarity measure, such as Euclidean distance. The error between PMU data and simulation output is referred to as response error in this paper. As investigated in [@siming_thesis], the underlying assumption that reducing response error results in a more accurate model and system is not guaranteed.
This paper examines the relationship between response error and system and model accuracy to highlight concerns with common measurement-based technique practices. The methods used in the study examine whether the selection of a load model is accurate at a given bus. Measurement-based techniques typically perform dynamic load model parameter tuning to improve accuracy. In parameter tuning, significant inter-dependencies and sensitivities exist between many dynamic load model parameters [@Choi; @Kim; @Son; @Ma; @Zhang], which is one of the reasons why dynamic load model parameter tuning is challenging. This study compares the selection of two loads models, the dynamic composite load model (CLM) and the static ZIP model instead of parameter tuning. The static ZIP model is the default load model chosen by power system simulators and represents loads with constant impedance, current, and power. The CLM load model has become an industry standard, particularly for the western United States, which represents aggregate loads including induction machine motor models, the ZIP model, and power electronics [@Kosterev; @Renmu]. The choice of changing the load model is made to compare known differences in responses from load motor models with the CLM model and static load models with the ZIP model. By comparing load model selection, the presence of a correlation between response error and system accuracy will be assessed.
This study performs two experiments to address two main hypotheses. The first experiment is a system level experiment to test hypothesis 1) can response error determine the total system accuracy of how many load models at buses in the system are accurate? The second experiment is a bus level experiment to test hypothesis 2) can response error indicate if a load model being used at a bus is accurate? The results from these experiments demonstrate that it can’t be assumed that response error and system accuracy are correlated. The main contribution of this paper is to identify the need for validation of techniques and metrics used in dynamic load modeling, as frequently used metrics can deliver inaccurate and meaningless results.
The remainder of this paper is organized as follows. Section II discusses the use of dynamic load models in industry and those used in this paper. In Section III, similarity measures are discussed in relevance to power systems time series data. Section IV details the methodology used to evaluate the system level experiment of hypothesis 1. Section V provides and discusses the results from system level experiment. Section VI details the methodology used to evaluate the bus level experiment of hypothesis 2. These results are provided and discussed in Section VII. In conclusion, Section VIII discusses the implication of the results found in this study and calls for attention to the importance of careful selection and validation of measurement-based technique metrics.
Similarity Measures {#similarity_section}
===================
A similarity measure compares how similar data objects, such as time series vectors, are to each other. A key component of measurement-based techniques is to use a similarity measure to calculate the response error. Then typically, an optimization or machine learning algorithm reduces this response error to improve the models or parameters in the system. Several measurement-based dynamic load model estimation studies employ Euclidean distance as a similarity measure [@Renmu; @Visconti; @Kong] . However, there are characteristics of power systems time series data which should be ignored or not emphasized, such as noise, which are instead captured by Euclidean distance. Power system time series data characteristics include noise, initialization differences, and oscillations at different frequencies. These characteristics result in shifts and stretches in output amplitude and time as detailed in Table \[similarity\_measures\].
-- ------------------------------------------------------------------------------------------------ --
**Amplitude & **Time\
**Shift & initialization differences, discontinuities & different/unknown initialization time\
**Stretch & noise & oscillations at different frequencies\
********
-- ------------------------------------------------------------------------------------------------ --
: Examples of amplitude and time shifting and stretching [@siming_thesis][]{data-label="similarity_measures"}
The characteristics listed in Table \[similarity\_measures\] are the effect of specific phenomena in the system. For example, differences in control parameters in motor models and potentially also playback between motor models can cause oscillations at different frequencies. Certain changes in output are important to capture as they have reliability consequences to utilities. An increase in the initial voltage swing after a disturbance can trip protection equipment. An increase in the time it takes for the frequency to cross or return to 60 Hz in the United States has regulatory consequences resulting in fines. Response error produced by similarity measures should capture these important changes. Other changes to output, such as noise, should be ignored.
Different situations when comparing simulation data to simulation data versus comparing simulation data to PMU data cause some characteristics listed in Table \[similarity\_measures\]. Comparing simulation data to simulation data occurs in theoretical studies, and comparing simulation data to PMU data would be the application for utilities. Initialization differences and differences in initialization time can occur when comparing simulation data to PMU data due to the difficulty in perfectly matching steady-state values. However, when comparing simulation data to simulation data, initialization differences and differences in initialization time likely highlight errors in the simulation models, parameters, or values.
Similarity measures have the capability to be invariant to time shift and stretch or amplitude shift and stretch. Table \[similarity\_measures2\] lists the similarity measures examined in this study with their corresponding capabilities. These similarity measures are chosen to test the sensitivities to all four quadrants of Table \[similarity\_measures\].
[c| p[1.1cm]{} p[1.1cm]{} p[0.9cm]{} p[0.9cm]{} ]{}\
& **Amplitude Shift & **Amplitude Stretch & **Time Shift & **Time Stretch\
**Euclidean Distance & & & &\
**Manhattan Distance & & & &\
**Dynamic Time Warping & & & $\bullet$ & $\bullet$\
**Cosine Distance & $\bullet$ & & &\
**Correlation Coefficient & $\bullet$ & $\bullet$ & &\
******************
Euclidean distance and Manhattan distance are norm-based measures which are variant to time and amplitude shifting and stretching. Euclidean distance is one of the most commonly used similarity measures in measurement-based techniques. These norm based distances can range from 0 to $\infty$. The cosine similarity takes the cosine of the angle between the two vectors to determine the similarity. By only using the angle between the vectors, this similarity is invariant to amplitude shifting [@siming_thesis]. This similarity can range from -1 to 1.
The Pearson correlation coefficient is invariant to amplitude shifting and stretching and also ranges from -1 to 1 [@siming_thesis].
Dynamic time warping (DTW) identifies the path between two
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: 'We study the suppression of the small-scale power spectrum due to the decay of charged matter to dark matter prior to recombination. Prior to decay, the charged particles couple to the photon-baryon fluid and participate in its acoustic oscillations. However, after decaying to neutral dark matter the photon-baryon fluid is coupled only gravitationally to the newly-created dark matter. This generically leads to suppression of power on length scales that enter the horizon prior to decay. For decay times of $\sim$$3.5$ years this leads to suppression of power on subgalactic scales, bringing the observed number of Galactic substructures in line with observation. Decay times of a few years are possible if the dark matter is purely gravitationally interacting, such as the gravitino in supersymmetric models or a massive Kaluza-Klein graviton in models with universal extra dimensions.'
author:
- Kris Sigurdson
- Marc Kamionkowski
title: 'Charged-particle decay and suppression of small-scale power'
---
The standard inflation-inspired cosmological model, with its nearly scale-invariant power spectrum of primordial perturbations, is in remarkable agreement with observation. It predicts correctly the detailed pattern of temperature anisotropies in the cosmic microwave background (CMB) [@CMB], and accurately describes the large scale clustering of matter in the Universe [@LSS]. However, on subgalactic scales there are possible problems with the standard cosmology that warrant further investigation. Namely, the model overpredicts the number of subgalactic halos by an order of magnitude compared to the 11 observed dwarf satellite galaxies of the Milky Way [@excessCDMpower]. Several possible resolutions have been proposed to this apparent discrepancy, ranging from astrophysical mechanisms that suppress dwarf-galaxy formation in subgalactic halos (see, for example, Ref. [@AstroSol]) to features in the inflaton potential that suppress small-scale power and thus reduce the predicted number of subgalactic halos [@Kamion2000].
In this *Letter*, we show that if dark matter is produced by the out-of-equilibrium decay of a long-lived charged particle, then power will be suppressed on scales smaller than the horizon at the decay epoch. Unlike some other recent proposals, which suppress small-scale power by modifying the dark-matter particle properties [@OtherMods], ours modifies the dark-matter production mechanism. In the model we discuss here, prior to decay, the charged particles couple electromagnetically to the primordial plasma and participate in its acoustic oscillations. After decay, the photon-baryon fluid is coupled only gravitationally to the neutral dark matter. This generically leads to suppression of power for scales that enter the horizon prior to decay. This suppression, reduces the amount of halo substructure on galactic scales while preserving the successes of the standard hierarchical-clustering paradigm on larger scales. Apart from the changes to the model due to the decay process, we adopt the standard flat-geometry $\Lambda$CDM cosmological model with present-day dark-matter density (in units of the critical density) $\Omega_{d}=0.25$, baryon density $\Omega_{b}=0.05$, cosmological constant $\Omega_{\Lambda}=0.70$, Hubble parameter $H_{0}=72~{\rm
km\,s^{-1} Mpc^{-1}}$, and spectral index $n=1$.
In the standard $\Lambda$CDM model the initial curvature perturbations of the Universe, presumably produced by inflation or some inflation-like mechanism, are adiabatic (perturbations in the total density but not the relative density between species) and Gaussian with a nearly scale-invariant spectrum of amplitudes. These initial perturbations grow and react under the influence of gravity and other forces, with the exact nature of their behavior dependent upon the species in question. Because dark-matter particles are, by assumption, cold and collisionless the fractional dark-matter-density perturbation $\delta_{d} \equiv \delta\rho_{d}/\rho_{d}$ can only grow under the influence of gravity. The baryonic species, being charged, are tightly coupled by Coulomb scattering to the electrons, which are themselves tightly coupled to the photons via Thomson scattering. The baryons and photons can thus be described at early times as a single baryon-photon fluid, with the photons providing most of the pressure and inertia and the baryons providing only inertia. Gravity will tend to compress this baryon-photon fluid, while the radiation pressure will support it against this compression. The result is acoustic oscillations, and the baryon density perturbation $\delta_{b} \equiv \delta\rho_{b}/\rho_{b}$ and photon density perturbation $\delta_{\gamma} \equiv \delta\rho_{\gamma}/\rho_{\gamma}$ will oscillate in time for length scales inside the horizon (on length scales larger than the horizon the pressure can have no effect). At early times these perturbations are very small and linear perturbation theory can be applied. This allows an arbitrary density field to be decomposed into a set of independently evolving Fourier modes, labeled by a wavenumber $k$. Fig. \[fig:delta\] shows the growth of dark-matter perturbations under the influence of gravity, and the oscillatory behavior of the baryon perturbation for the same wavenumber.
We choose to work in the synchronous gauge where the time slicing is fixed to surfaces of constant proper time so that particle decays proceed everywhere at the same rate. In the synchronous gauge the standard linearized evolution equations for perturbations in Fourier space are (e.g., [@Ma95])
$$\begin{aligned}
\dot{\delta}_{d} = - \theta_{d}-\frac{1}{2}\dot{h} \, ,
\quad
\dot{\theta}_{d} = -\frac{\dot{a}}{a}\theta_{d} \, ,
\label{eqn:dark_delta}\end{aligned}$$
$$\begin{aligned}
\dot{\delta}_{b} = - \theta_{b}-\frac{1}{2}\dot{h} \, ,\end{aligned}$$
$$\begin{aligned}
\dot{\theta}_{b} = -\frac{\dot{a}}{a}\theta_{b} &+ c_{s}^2k^2\delta_{b} + \frac{4\rho_{\gamma}}{3\rho_{b}} a n_{e} \sigma_{T} (\theta_{\gamma}-\theta_{b}) \, ,
\label{eqn:baryon_theta}\end{aligned}$$
$$\begin{aligned}
\dot{\delta}_{\gamma} = -\frac{4}{3}\theta_{\gamma}-\frac{2}{3}\dot{h} \, ,\end{aligned}$$
and $$\begin{aligned}
\dot{\theta}_{\gamma} = k^2 \left( \frac{1}{4}\delta_{\gamma} - \Theta_{\gamma} \right) + a n_{e}\sigma_{T}(\theta_{b}-\theta_{\gamma}) \, ,
\label{eqn:gamma_theta}\end{aligned}$$ where $\theta_{b}$, $\theta_{d}$, and $\theta_{\gamma}$ are the divergence of the baryon, dark-matter, and photon fluid velocities respectively and an overdot represents a derivative with respect to the conformal time $\eta$. Here $h$ is the trace of the spatial metric perturbations $h_{ij}$. Its evolution is described by the linearized Einstein equations, which close this system of linearized equations. The last terms on the right-hand-sides of Eqs. (\[eqn:baryon\_theta\]) and (\[eqn:gamma\_theta\]) account for Thomson scattering between baryons and photons, and are responsible for keeping them tightly coupled in the early Universe. In these equations $\sigma_{T}$ is the Thomson cross section, $n_{e}$ is the electron number density, and $c_{s}$ is the intrinsic sound speed of the baryons. During tight coupling the second moment $\Theta_{\gamma}$ of the photon distribution and other higher moments can be neglected, and the radiation can reliably be given the fluid description described above.
We now show how Eqs. (\[eqn:dark\_delta\])–(\[eqn:gamma\_theta\]) are modified by the decay of a long-lived metastable charged particle to dark matter in the early Universe. We assume that the decay is of the form $q^{\pm} \rightarrow \ell^{\pm}d$, so the decay of each charged particle $q^{\pm}$ produces a dark-matter particle $d$ and a charged lepton $\ell^{\pm}$. Denoting the decaying charged component by the subscript ‘$q$’, the background density $\rho_{q}$ evolves according to the equation, $$\begin{aligned}
\dot{\rho}_{q} = -3\frac{\dot{a}}{a}\rho_{q} - \frac{a}{\tau}\rho_{q} \, ,
\label{eqn:background_q}\end{aligned}$$ where $\tau$ is the lifetime of $q^{\pm}$. The first term just accounts for the normal $a^{-3}$ scaling of non-relativistic matter in an expanding universe, while the second leads to the expected exponential decay of the comoving density. For the dark matter we have $$\begin{aligned}
\dot{\rho}_{d} = -3\frac{\dot{a}}{a}\rho_{d} + \lambda \frac{a}{\tau}\rho_{q} \, ,
\label{eqn:background_d}\end{aligned}$$ where $\lambda=m_{d}/m_{q}$ is the ratio of the masses of dark matter particle the charged particle. The energy density in photons evolves according to $$\begin{aligned}
\
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: 'The purpose of this note is to use the scaling principle to study the boundary behaviour of some conformal invariants on planar domains. The focus is on the Aumann–Carathéodory rigidity constant, the higher order curvatures of the Carathéodory metric and two conformal metrics that have been recently defined.'
address:
- 'ADS: Department of Mathematics, Indian Institute of Science, Bangalore 560012, India'
- 'KV: Department of Mathematics, Indian Institute of Science, Bangalore 560 012, India'
author:
- Amar Deep Sarkar and Kaushal Verma
title: Boundary behaviour of some conformal invariants on planar domains
---
Introduction
============
The scaling principle in several complex variables provides a unified paradigm to address a broad array of questions ranging from the boundary behaviour of biholomorphic invariants to the classification of domains with non-compact automorphism group. In brief, the idea is to blow up a small neighbourhood of a smooth boundary point, say $p$ of a given domain $D \subset \mathbb C^n$ by a family of non-isotropic dilations to obtain a limit domain which is usually easier to deal with. The choice of the dilations is dictated by the Levi geometry of the boundary near $p$ and the interesting point here is that the limit domain is not necessarily unique. For planar domains, this method is particularly simple and the limit domain always turns out to be a half space if $p$ is a smooth boundary point.
The purpose of this note is to use the scaling principle to understand the boundary behaviour of some conformal invariants associated to a planar domain. We will focus on the Aumann–Carathéodory rigidity constant [@MainAumannCaratheodory], the higher order curvatures of the Carathéodory metric [@BurbeaPaper], a conformal metric arising from holomorphic quadratic differentials [@SugawaMetric] and finally, the Hurwitz metric [@TheHurwitzMetric]. These analytic objects have nothing to do with one another, except of course that they are all conformal invariants, and it is precisely this disparity that makes them particularly useful to emphasize the broad utility of the scaling principle as a technique even on planar domains.
While each of these invariants requires a different set of conditions on $D$ to be defined in general, we will assume that $D \subset \mathbb C$ is bounded – all the invariants are well defined in this case and so is $\lambda_D(z) \vert dz \vert$, the hyperbolic metric on $D$. Assuming this will not entail any great loss of generality but will instead assist in conveying the spirit of what is intended with a certain degree of uniformity. Any additional hypotheses on $D$ that are required will be explicitly mentioned. Let $\psi$ be a $C^2$-smooth local defining function for $\partial D$ near $p \in \partial D$ and let $ \lambda_D(z) \vert dz \vert $ denotes the hyperbolic metric on $ D $. In what follows, $\mathbb D \subset \mathbb C$ will denote the unit disc. The question is to determine the asymptotic behaviour of these invariants near $p$. Each of the subsequent paragraphs contain a brief description of these invariants followed by the corresponding results and the proofs will follow in subsequent sections after a description of the scaling principle for planar domains.
*Higher order curvatures of the Carathéodory metric*:
-----------------------------------------------------
Suita [@SuitaI] showed that the density $c_D(z)$ of the Carathéodory metric is real analytic and that its curvature $$\kappa(z) = - c_D^{-2}(z) \Delta \log c_D(z)$$ is at most $-4$ for all $z \in D$. In higher dimensions, this metric is not smooth in general.
For $j, k \ge 0$, let $\partial^{j \overline k} c_D$ denote the partial derivatives $\partial^{j+k} c_D/\partial z_j \partial \overline z_k$. Write $((a_{jk}))_{j, k \ge 0}^n$ for the $(n+1) \times (n+1)$ matrix whose $(j, k)$-th entry is $a_{jk}$. For $n \ge 1$, Burbea [@BurbeaPaper] defined the $n$-th order curvature of the Carathéodory metric $c_D(z) \vert dz \vert$ by $$\kappa_n(z: D) = -4c_D(z)^{-(n+1)^2} J^D_n(z)$$ where $J^D_n(z) = \det ((\partial^{j \overline k} c_D))_{j, k \ge 0}^n$. Note that $$\kappa(z) = \kappa_1(z : D)$$ which can be seen by expanding $J_1(z)$. Furthermore, if $f : D \rightarrow D'$ is a conformal equivalence between planar domains $D, D'$, then the equality $$c_D(z) = c_{D'}(f(z)) \vert f'(z) \vert$$ upon repeated differentiation shows that the mixed partials of $c_D(z)$ can be expressed as a combination of the mixed partials of $c_{D'}(f(z))$ where the coefficients are rational functions of the derivatives of $f$ – the denominators of these rational functions only involve $f'(z)$ which is non-vanishing in $D$. By using elementary row and column operations, it follows that $$J^D_n(z) = J^{D'}_n(f(z)) \vert f'(z) \vert^{n+1}$$ and this implies that $\kappa_n(z: D)$ is a conformal invariant for every $n \ge 1$. If $D$ is equivalent to $\mathbb D$, a calculation shows that $$\kappa_n(z: D) = -4 \left( \prod_{k=1}^n k ! \right)^2$$ for each $z \in D$. For a smoothly bounded (and hence of finite connectivity) $D$, Burbea [@BurbeaPaper] showed, among other things, that $$\kappa_n(z: D) \le -4 \left( \prod_{k=1}^n k ! \right)^2$$ for each $z \in D$. This can be strengthened as follows:
\[T:HigherCurvature\] Let $D \subset \mathbb C$ be a smoothly bounded domain. For every $p \in \partial D$ $$\kappa_n(z: D) \rightarrow -4 \left( \prod_{k=1}^n k ! \right)^2$$ as $z \rightarrow p$.
*The Aumann–Carathéodory rigidity constant*:
--------------------------------------------
Recall that the Carathéodory metric $c_D(z) \vert dz \vert$ is defined by $$c_D(z) = \sup \left\{ \vert f'(z) \vert : f : D \rightarrow \mathbb D \; \text{holomorphic and} \; f(z) = 0 \right\}.$$ Let $D$ be non-simply connected and fix $a \in D$. Aumann–Carathéodory [@MainAumannCaratheodory] showed that there is a constant $\Omega(D, a)$, $0\le \Omega(D, a) < 1$, such that if $f$ is any holomorphic self-mapping of $D$ fixing $a$ and $f$ is [*not*]{} an automorphism of $D$, then $\vert f'(a) \vert \le \Omega(D, a)$. For an annulus $\mathcal A$, this constant was explicitly computed by Minda [@AumannCaratheodoryRigidityConstant] and a key ingredient was to realize that $$\Omega(\mathcal A, a) = c_{\mathcal A}(a)/\lambda_{\mathcal A}(a).$$ The explicit formula for $\Omega(\mathcal A, a)$ also showed that $\Omega(\mathcal A, a) \rightarrow 1$ as $a \rightarrow \partial \mathcal A$. For non-simply connected domains $D$ with higher connectivity, [@AumannCaratheodoryRigidityConstant] also shows that $$c_{D}(a)/\lambda_{D}(a) \le \Omega(D, a) < 1.$$ Continuing this line of thought further, Minda in [@HyperbolicMetricCoveringAumannCaratheodoryConstant] considers a pair of bounded domains $D, D'$ with base points $a \in D, b \in D'$ and the associated ratio $$\Omega(a, b) = \sup \{ \left(f^{\ast}(\lambda_{D'})/\lambda_D\right)(a): f \in \mathcal N(D, D'), f(a) = b \}$$ where $\mathcal N(D, D')$ is the class of holomorphic maps $f : D \rightarrow D'$ that are [*not*]{} coverings. Note that $$\left(f^{\ast}(\lambda_{D'})/\lambda_D\right)(a) = \left( \lambda_{D'}(b) \;\vert f'(a) \vert \right) / \lambda_D(a).$$ Among other things, Theorems 6 and 7 of [@HyperbolicMetricCoveringAumannCaratheodoryConstant] respectively show that $$c_D(a)/\lambda_D(a) \le \Omega(a, b)
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: 'Planets interact with their host stars through gravity, radiation and magnetic fields, and for those giant planets that orbit their stars within $\sim$10 stellar radii ($\sim$0.1 AU for a sun-like star), star-planet interactions (SPI) are observable with a wide variety of photometric, spectroscopic and spectropolarimetric studies. At such close distances, the planet orbits within the sub-alfvénic radius of the star in which the transfer of energy and angular momentum between the two bodies is particularly efficient. The magnetic interactions appear as enhanced stellar activity modulated by the planet as it orbits the star rather than only by stellar rotation. These SPI effects are informative for the study of the internal dynamics and atmospheric evolution of exoplanets. The nature of magnetic SPI is modeled to be strongly affected by both the stellar and planetary magnetic fields, possibly influencing the magnetic activity of both, as well as affecting the irradiation and even the migration of the planet and rotational evolution of the star. As phase-resolved observational techniques are applied to a large statistical sample of hot Jupiter systems, extensions to other tightly orbiting stellar systems, such as smaller planets close to M dwarfs become possible. In these systems, star-planet separations of tens of stellar radii begin to coincide with the radiative habitable zone where planetary magnetic fields are likely a necessary condition for surface habitability.'
author:
- 'Evgenya L. Shkolnik'
- Joe Llama
bibliography:
- 'chapter\_revision\_refs.bib'
title: 'Signatures of star-planet interactions'
---
Introduction
=============
Giant planets located $<0.1$ AU from their parent star comprise $\sim$7% of the confirmed exoplanets, primarily around FGK stars[^1]. At such small orbital separations, these hot Jupiters (HJ) provide a laboratory to study the tidal and magnetic interactions between the planet and the star that does not exist in our own solar system. These interactions can be observed because they scale as $a^{-3}$ and $a^{-2}$, respectively, where $a$ is the separation between the two bodies. Although HJs are rare around M dwarfs (only five known), statistics from the *Kepler* survey have revealed that M stars host on average 0.24 Earth-sized planets in the habitable zone [@dres15]. We can apply the techniques trained on HJs around FGK stars on to small planet + M dwarf systems.
[@cuntz2000] first suggested that close-in planets may increase and modulate their host star’s activity levels through tidal and magnetic interactions as such effects are readily observed in the comparable cases of tightly orbiting RS CVn binary systems (e.g. @piskunov1996 [@shkolnik2005a]). Variable excess stellar activity with the period of the planet’s orbit rather than with star’s rotation period, indicates a magnetic interaction with the planet, while a period of half the orbit’s indicates a tidal interaction. This suggestion has spurred the search for such interactions as a means of studying the angular momentum evolution of HJ systems and as detecting the magnetic fields of exoplanets (e.g. @cuntz2004 [@saar2004; @lanza2009; @shkolnik2003; @shkolnik2005; @shkolnik2008; @cohen2009]).
Exoplanetary magnetic fields provide a probe into a planet’s internal dynamics and constraints on its atmospheric mass loss. This fundamental physical property of exoplanets would most directly be detected through the radio emission produced by electron cyclotron maser instability (see review by @treumann2006 and Chapter 9.6 of this book). Such emission has been detected from all of the solar system’s gas giants and the Earth resulting from an interaction between the planetary magnetosphere and the solar wind. There are no detections to date of radio emission from exoplanets although searches have been typically less sensitive at higher emission frequencies than predicted for exoplanets (e.g. @farrell1999 [@bastian2000; @lanza2009; @lazio2009; @jardine2008; @vidotto2012] and see review by @lazio2016). Even though a radio detection of a planet’s magnetic field ($B_p$) remains elusive, there have been reported detections through magnetic star-planet interactions (SPI). Nearly twenty studies of HJ systems, varying in wavelengths and observing strategy, have independently come to the conclusion that a giant exoplanet in a short-period orbit can induce activity on the photosphere and upper atmosphere of its parent star. This makes the host star’s magnetic activity a probe of the planet’s magnetic field.
Due to their proximity to their parent star, magnetic SPI in HJ systems can be detected because these exoplanets typically lie within the Alfvén radius of their parent star ($\lesssim 10R_\star$ or $\lesssim 0.1$ AU for a sun-like star). At these small separations, the Alfvén speed is larger than the stellar wind speed, allowing for direct magnetic interaction with the stellar surface. If the giant planet is magnetized, then the magnetosphere of the planet may interact with the stellar corona throughout its orbit, potentially through magnetic reconnection, the propagation of Alfvén waves within the stellar wind, and the generation of electron beams that may strike the base of the stellar corona.
In the case of characterizing habitable zone planets, the current favored targets are low-mass stars where the habitable zone is located much closer to the parent star compared to the Earth-Sun separation, making the planet easier to detect and study. Low-mass stars are typically much more magnetically active than solar type stars. It is therefore vital that we understand how this increase in magnetic activity impacts the potential habitability of a planet orbiting close to a low-mass star and what defenses the planet has against it. In order to sustain its atmosphere, a planet around a low-mass star must be able to withstand enhanced atmospheric erosion from extreme stellar wind and also from the impact of coronal mass ejections. Both of these reasons necessitate the push towards the detection and characterization of magnetic SPI in M dwarf planetary systems.
The need to understand magnetic SPI is also driving the modeling effort forward. There have been considerable efforts towards modeling the space weather environments surrounding close-in giant exoplanets and star-planet interactions. The magnetized stellar winds may interact with the close-in exoplanet through the stars’ outflows and magnetospheres, and potentially lead to observable SPI. Observing the stellar winds of stars other than the Sun is difficult and there are very few observational constraints on the winds of low-mass stars [@wood2005]. Star-planet interactions can be simulated by using hydrodynamical (HD) or magnetohydrodynamical (MHD) numerical models. The modeling efforts have not only focused on studying individual systems, but have also been extended to more general scenarios to help aid the interpretation of statistical studies.
MHD models for star-planet interactions require a dynamic model for the stellar corona and wind, and also a model for the planet, which acts as an additional, time-dependent boundary condition in the simulation [@cohen2011]. The standard approach to modeling SPI involves adapting 3D MHD models originally developed for the solar corona and wind. The BATS-R-US (@powell1999 [@toth2012]) global MHD model forms part of the Space Weather Modeling Framework (@toth2005) and is capable of accurately reproducing the large-scale density and temperature structure of the solar corona and has been adapted to model the winds of other stars. This MHD model uses a stellar magnetogram (or solar synoptic map) as input along with other properties of the host star, including the stellar coronal base density ($\rho$), surface temperature ($T$), mass ($M_\star$), radius ($R_\star$) and rotation period ($P_\star$). The model then self-consistently solves the ideal MHD equations for the stellar corona and wind, which in turn allows the conditions experienced by an exoplanet to be studied (e.g., @cohen2009 [@cohen2011; @cohen2014; @vidotto2009; @vidotto2013; @vidotto2014; @doNascimento]).
In this chapter, we discuss the observational evidence of magnetic SPI in FGK and M stars plus the array of models produced to explain and characterize this diagnostic, albeit complex, physical phenomenon.
Planet induced and orbit phased stellar emission
================================================
Although no tidally induced variability has yet been reported, magnetic SPI has seen a blossoming of data and modeling over the past 15 years. The strongest evidence for magnetic SPI is excess stellar activity modulated in phase with a planet as it orbits a star with a rotation period significantly different from the planet’s orbital period. Such signatures were first reported by [@shkolnik2003] who observed periodic chromospheric activity through Ca II H & K variability of HJ host HD 179949 modulated on the planet’s orbital period of 3.092 d [@butler2006] rather than the stellar rotation period of 7 days [@fares2012]. Those data consisted of nightly high-resolution ($\lambda/\Delta\lambda\approx$110,000), high signal-to-noise (a few hundred per pixel) spectroscopy acquired over several epochs (Figure \[fig:hd179949\_spi\], @shkolnik2005 [@shkolnik2008; @gurdemir2012]).
![Integrated Ca II K residual flux of HJ host HD 179949 as a function of orbital phase where $\phi$=0 is the sub-planetary point (or inferior
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: 'Healthcare is one of the largest business segments in the world and is a critical area for future growth. In order to ensure efficient access to medical and patient-related information, hospitals have invested heavily in improving clinical mobile technologies and spread their use among doctors. Notwithstanding the benefits of mobile technologies towards a more efficient and personalized delivery of care procedures, there are also indications that their use may have a negative impact on patient-centeredness and often places many cognitive and physical demands on doctors, making them prone to make medical errors. To tackle this issue, in this paper we present the main outcomes of the project TESTMED, which aimed at realizing a clinical system that provides operational support to doctors using mobile technologies for delivering care to patients, in a bid to minimize medical errors. The system exploits concepts from Business Process Management on how to manage a specific class of care procedures, called clinical guidelines, and how to support their execution and mobile orchestration among doctors. As a viable solution for doctors’ interaction with the system, we investigated the use of vocal and touch interfaces. User evaluation results indicate a good usability of the system.'
author:
- Andrea Marrella
- Massimo Mecella
- Mahmoud Sharf
- Tiziana Catarci
bibliography:
- 'biblio.bib'
date: 'Received: date / Accepted: date'
subtitle: |
Process-aware Enactment of Clinical Guidelines\
through Multimodal Interfaces
title: The TESTMED Project Experience
---
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: |
We use the method of thermal QCD sum rules to investigate the effects of temperature on the neutron electric dipole moment $d_n$ induced by the vacuum $\bar{\theta}$-angle. Then, we analyze and discuss the thermal behaviour of the ratio $\mid {d_n \over
\bar{\theta}}\mid $ in connection with the restoration of the CP-invariance at finite temperature.
author:
- |
M. Chabab$^{1.2}\thanks{e-mail: mchabab@ucam.ac.ma}$, N. El Biaze$^1$ and R. Markazi$^1$\
\
title: |
\
\
Note on the Thermal Behavior of the Neutron Electric Dipole Moment from QCD Sum Rules
---
22.5cm16.8cm-.4cm-.9cm = 6pt plus 2pt minus 1pt
addtoreset[equation]{}[section]{}
=18.6pt plus 0.2pt minus 0.1pt
addtoreset[equation]{}[section]{}
Introduction
============
The CP symmetry is, without doubt, one of the fundamental symmetries in nature. Its breaking still carries a cloud of mystery in particle physics and cosmology. Indeed, CP symmetry is intimately related to theories of interactions between elementary particles and represents a cornerstone in constructing grand unified and supersymmetric models. It is also necessary to explain the matter-antimatter asymmetry observed in universe.
The first experimental evidence of CP violation was discovered in the $K-\bar{K}$ mixing and kaon decays [@C]. According to the CPT theorem, CP violation implies T violation. The latter is tested through the measurement of the neutron electric dipole moment (NEDM)$d_n$. The upper experimental limit gives confidence that the NEDM can be another manifestation of CP breaking. To investigate the CP violation phenomenon many theoretical models were proposed. In the standard model of electroweak interactions, CP violation is parametrized by a single phase in the Cabbibo Kobayashi Maskawa (CKM) quark mixing matrix [@CKM]. Other models exhibiting a CP violation are given by extensions of the standard model; among them, the minimal supersymmetric standard model $MSSM$ includes in general soft complex parameters which provide new additional sources of CP violation [@DMV; @BU].
CP violation can be also investigated in the strong interactions context through QCD framework. In fact, the QCD effective lagrangian contains an additional CP-odd four dimensional operator embedded in the following topological term: $$L_{\theta}=\theta {\alpha_s\over 8
\pi}G_{\mu\nu}\tilde{G}^{\mu\nu},$$ where $G_{\mu\nu}$ is the gluonic field strength, $\tilde{G}^{\mu\nu}$ is its dual and $\alpha_s$ is the strong coupling constant. The $G_{\mu\nu}\tilde{G}^{\mu\nu}$ quantity is a total derivative, consequently it can contribute to the physical observables only through non perturbative effects. The NEDM is related to the $\bar \theta$-angle by the following relation : $$d_n\sim {e\over M_n}({m_q\over M_n})\bar \theta \sim \{
\begin{array}{c}
2.7\times 10^{-16}\overline{\theta }\qquad \cite{Baluni}\\
5.2\times 10^{-16}\overline{\theta }\qquad \cite{cvvw}
\end{array}$$ and consequently, according to the experimental measurements $d_n<1.1\times 10^{-25}ecm$ [@data], the $\bar
\theta $ parameter must be less than $2\times10^{-10}$ [@peccei2]. The well known strong CP problem consists in explaining the smallness of $\bar{\theta}$. In this regard, several scenarios were suggested. The most known one was proposed by Peccei and Quinn [@PQ] and consists in implementing an extra $U_A(1)$ symmetry which permits a dynamical suppression of the undesired $\theta $-term. This is possible due to the fact that the axial current $J_5^\mu$ is related to the gluonic field strength through the following relation $\partial_\mu
J_5^\mu={\alpha_s\over8 \pi}G_{\mu\nu}\tilde{G}^{\mu\nu}$. The breakdown of the $U_A(1)$ symmetry gives arise to a very light pseudogoldstone boson called axion. This particle may well be important to the puzzle of dark matter and might constitute the missing mass of the universe [@LS].
Motivated by: (a) the direct relation between the $\bar
\theta$-angle and NEDM $d_n $, as it was demonstrated firstly in [@cvvw] via the chiral perturbation theory and recently in [@PR; @PR1] within QCD sum rules formalism; (b) the possibility to restore some broken symmetries by increasing the temperature; we shall use the QCD sum rules at $T\ne 0$ [@BS] to derive thermal dependence of the ratio $\mid{
d_n\over \bar{\theta}}\mid$. Then we study its thermal behaviour at low temperatures and discuss the consequences of temperature effects on the restoration of the broken CP symmetry.
This paper is organized as follows: Section 2 is devoted to the calculations of the NEDM induced by the $\bar {\theta}$ parameter from QCD sum rules. In section 3, we show how one introduces temperature in QCD sum rules calculations. We end this paper with a discussion and qualitative analysis of the thermal effects on the CP symmetry.
NEDM from QCD sum rules
========================
In the two later decades, QCD sum rules à la SVZ [@SVZ] were applied successfully to the investigation of hadronic properties at low energies. In order to derive the NEDM through this approach, many calculations were performed in the literature [@CHM; @KW]. One of them, which turns out to be more practical for our study, has been obtained recently in [@PR; @PR1]. It consists in considering a lagrangian containing the following P and CP violating operators: $$L_{P,CP}=-\theta_q m_* \sum_f \bar{q}_f i\gamma_5 q_f +\theta
{\alpha_s\over 8 \pi}G_{\mu\nu}\tilde{G}^{\mu\nu}.$$ $\theta_q$ and $\theta$ are respectively two angles coming from the chiral and the topological terms and $m_*$ is the quark reduced mass given by $m_*$=$m_um_d \over{m_u +m_d} $. The authors of [@PR1] start from the two points correlation function in QCD background with a nonvanishing $\theta$ and in the presence of a constant external electomagnetic field $ F^{\mu\nu}$: $$\Pi(q^2) = i \int d^4x
e^{iqx}<0|T\{\eta(x)\bar{\eta}(0)\}|0>_{\theta,F} .$$ $\eta(x)$ is the interpolating current which in the case of the neutron reads as [@I]: $$\eta
=2\epsilon_{abc}\{(d^T_aC\gamma_5u_b)d_c+\beta(d^T_aCu_b)\gamma_5d_c\},$$ where $\beta$ is a mixing parameter. Using the operator product expansion (OPE), they have first performed the calculation of $\Pi(q^2)$ as a function of matrix elements and Wilson coefficients and then have confronted the QCD expression of $\Pi(q^2)$ to its phenomenological parametrisation. $\Pi(q^2)$ can be expanded in terms of the electromagnetic charge as[@CHM]: $$\Pi(q^2)=\Pi^{(0)}(q^2)+e \Pi^{(1)}(q^2,F^{\mu\nu})+ O(e^2).$$ The first term $\Pi^{(0)}(q^2)$ is the nucleon propagator which include only the CP-even parameters [@SVZ1; @IS], while the second term $\Pi^{(1)}(q^2,F^{\mu\nu})$ is the polarization tensor which may be expanded through Wilson OPE as: $\sum
C_n<0|\bar{q}\Gamma q|0>_{\theta,F}$, where $\Gamma$ is an arbitrary Lorentz structure and $C_n$ are the Wilson coefficient functions calculable in perturbation theory [@SVZ1]. From this expansion, one keeps only the CP-odd contribution piece. By considering the anomalous axial current, one obtains the following $\theta$ dependence of $<0|\bar{q}\Gamma q|0>_{\theta}$ matrix elements [@PR]: $$m_q <0|\bar{q}\Gamma q|0>_{\theta}= i m_*\theta <0|\bar{q}\Gamma
q|0> ,$$ where $m_q$ and $m_*$ are respectively the quark and reduced masses. The electromagnetic dependence of these matrix elements can be parametrized through the implementation of the $\kappa$, $\chi $ and $\xi$ susceptibilities defined as [@IS]:\
$$\begin{tabular}{lc}
$<0|\bar{q}\sigma^{\mu\nu} q|0>_F= \chi F^{\mu\nu} <0|\bar{q}q|0>$
\\ $g<0|\bar{q}G^{\mu\nu} q|0>_{F}= \kappa F^{\
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: 'We consider the initial value problem $u_t = \Delta \log u$, $u(x,0) = u_0(x)\ge 0$ in ${\mathbb R}^2$, corresponding to the Ricci flow, namely conformal evolution of the metric $u \, (dx_1^2 + dx_2^2)$ by Ricci curvature. It is well known that the maximal (complete) solution $u$ vanishes identically after time $T= \frac 1{4\pi} \int_{{\mathbb R}^2} u_0 $. Assuming that $u_0$ is compactly supported we describe precisely the Type II vanishing behavior of $u$ at time $T$: we show the existence of an inner region with exponentially fast vanishing profile, which is, up to proper scaling, a [*soliton cigar solution*]{}, and the existence of an outer region of persistence of a logarithmic cusp. This is the only Type II singularity which has been shown to exist, so far, in the Ricci Flow in any dimension. It recovers rigorously formal asymptotics derived by J.R. King [@K].'
address:
- 'Department of Mathematics, Columbia University, New York, USA'
- 'Department of Mathematics, Columbia University, New York, USA'
author:
- 'Panagiota Daskalopoulos$^*$'
- Natasa Sesum
title: 'Type II extinction profile of maximal Solutions to the Ricci flow in ${\mathbb R}^2$'
---
[^1]
Introduction
============
We consider the Cauchy problem $$\begin{cases} \label{eqn-u}
u_t = \Delta \log u & \mbox{in} \,\, {\mathbb R}^2
\times (0,T)\\
u(x,0) = u_0(x) & x \in {\mathbb R}^2 ,
\end{cases}$$ for the [*logarithmic fast diffusion*]{} equation in ${\mathbb R}^2$, with $T >0$ and initial data $u_0 $ non-negative, bounded and compactly supported.
It has been observed by S. Angenent and L. Wu [@W1; @W2] that equation represents the evolution of the conformally equivalent metric $g_{ij} = u\, dx_i\, dx_j$ under the [*Ricci Flow*]{} $$\label{eqn-ricci}
\frac{\partial g_{ij}}{\partial t} = -2 \, R_{ij}$$ which evolves $g_{ij}$ by its Ricci curvature. The equivalence easily follows from the observation that the conformal metric $g_{ij} = u\, I_{ij}$ has scalar curvature $R = -
(\Delta \log u) /u$ and in two dimensions $R_{ij} = \frac 12 \,
R\, g_{ij}$.
Equation arises also in physical applications, as a model for long Van-der-Wals interactions in thin films of a fluid spreading on a solid surface, if certain nonlinear fourth order effects are neglected, see [@dG; @B; @BP].
It is shown in [@DD1] that given an initial data $u_0 \geq 0$ with $\int_{{\mathbb R}^2} u_0 \, dx < \infty$ and a constant $\gamma \geq 2 $, there exists a solution $u_\gamma$ of with $$\label{eqn-intc}
\int_{{\mathbb R}^2} u_\lambda (x,t) \, dx = \int_{{\mathbb R}^2} u_0 \, dx -
2\pi \gamma \, t.$$ The solution $u_\gamma$ exists up to the exact time $T=T_\gamma$, which is determined in terms of the initial area and $\gamma$ by $T_\gamma= \frac{1}{2\pi\, \gamma} \, \int_{{\mathbb R}} u_0 \, dx.$
We restrict our attention to [*maximal solutions*]{} $u$ of , corresponding to the value $\gamma =2$ in , which vanish at time $$\label{eqn-mvt}
T= \frac{1}{4 \pi} \, \int_{{\mathbb R}^2} u_0 (x) \, dx.$$ It is shown in [@DD1] and [@RVE] that if $u_0$ is compactly supported, then the maximal solution $u$ which extincts at time $T$ satisfies the asymptotic behavior $$\label{eqn-agc}
u(x,t) = \frac {2 t}{|x|^2\log^2 |x|} \left ( 1 + o(1)
\right ), \qquad \mbox{as \,\, $|x| \to \infty$}, \quad 0 \leq t <
T.$$ This bound, of course, deteriorates as $t \to T$. Geometrically corresponds to the condition that the conformal metric is complete. The manifold can be visualized as a surface of finite area with an unbounded cusp.
J.R. King [@K] has formally analyzed the extinction behavior of maximal solutions $u$ of , as $t \to T^-$. His analysis, for radially symmetric and compactly supported initial data, suggests the existence of two regions of different behavior: in the [*outer region*]{} $(T-t)\, \log r > T$ the “logarithmic cusp” exact solution $2 t\,
/|x|^2 \, \log^2 |x|$ of equation $u_t = \Delta \log u$ persists. However, in the [*inner region*]{} $(T-t)\, \log r \leq T$ the solution vanishes exponentially fast and approaches, after an appropriate change of variables, one of the soliton solutions $U$ of equation $U_\tau = \Delta \log U$ on $-\infty < \tau <
\infty$ given by $U(x,\tau) = 1/( \lambda |x|^2 + e^{4\lambda \tau})$, with $\tau=1/(T-t)$ and $\lambda=T/2$.
This behavior was established rigorously in the radially symmetric case by the first author and M. del Pino in [@DD2]. The precise asymptotics of the Ricci flow neckpinch in the compact case, on $S^n$, has been established by Knopf and Angenent in [@AngKn].
Our goal in this paper is to remove the assumption of radial symmetry and establish the vanishing behavior of maximal solutions of for any non-negative compactly supported initial data.
To state the inner region behavior in a precise manner, we perform the change of variables $$\label{eqn-rbu}
\bar u(x,\tau) = \tau^2 \, u(x, t), \qquad \tau = \frac 1{T-t}$$ and $$\label{eqn-rtu}
\qquad \tilde u(y,\tau) = \alpha(\tau) \, \bar
u(\alpha(\tau)^{1/2} y,\tau),$$ with $$\label{eqn-atau}
\alpha(\tau) = [\bar u(0,\tau)]^{-1} = [(T-t)^{-2} u(0,t)]^{-1}$$ so that $\tilde u(0,\tau)=1$.
A direct computation shows that the rescaled solution $\tilde u$ satisfies the equation
$$\label{eqn-tu}
\tilde u_\tau = \Delta \log \tilde u + \frac {\alpha
'(\tau)}{2\alpha (\tau)} \, \nabla ( y \cdot \tilde u) +\frac{2
\tilde u}{\tau}.$$
Then, following result holds:
\[Mth1\] (Inner behavior) Assume that the initial data $u_0$ is non-negative, bounded and compactly supported. Then, $$\label{eqn-lim}
\lim_{\tau \to \infty} \frac{ \alpha ' (\tau)}{2\, \alpha(\tau)} = T$$ and the rescaled solution $\tilde u$ defined by - converges, uniformly on compact subsets of ${\mathbb R}^2$, to the solution $$U(x) = \frac 1{ \frac T2 \, |y|^2 +
1}$$ of the steady state equation $$\Delta \log U + T\cdot \nabla ( y \cdot U)=0.$$
Since for any maximal solution $T= (1/{4\pi}) \int_{{\mathbb R}^2} u_0(x)\, dx$, this theorem shows, in particular, that the limit of the rescaled solution is uniquely determined by the area of the initial data. The uniqueness of the limit has not previously shown in [@DD2] even under the assumption of radial symmetry.
To describe the vanishing behavior of $u$ in the outer region we first perform the cylindrical change of variables $$\label{eqn-rv}
v(\zeta,\theta,t) = r^2\, u(r,\theta,t), \qquad \zeta =\log r$$ with $(r,\theta)$ denoting the polar coordinates. Equation $u_t=\Delta \log u$ in cylindrical coordinates takes the form $$\label{eqn-v}
v_t = \Delta_c \log v$$ with $\Delta_c$ denoting the Laplacian in cylindrical coordinates defined as $$\Delta_c \log v=(\log v)_{\zeta\zeta} + (\log v)_{\theta\theta}.$$
We then perform a further scaling setting $$\label{eqn
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: 'Using first-principles calculations, we investigate the positional dependence of trace elements such as O and Cu on the crystal field parameter $A_2^0$, proportional to the magnetic anisotropy constant $K_u$ of Nd ions placed at the surface of Nd$_2$Fe$_{14}$B grains. The results suggest the possibility that the $A_2^0$ parameter of Nd ions at the (001) surface of Nd$_2$Fe$_{14}$B grains exhibits a negative value when the O or Cu atom is located near the surface, closer than its equilibrium position. At the (110) surface, however, O atoms located at the equilibrium position provide a negative $A_2^0$, while for Cu additions $A_2^0$ remains positive regardless of Cu’s position. Thus, Cu atoms are expected to maintain a positive local $K_u$ of surface Nd ions more frequently than O atoms when they approach the grain surfaces in the Nd-Fe-B grains.'
author:
- Yuta Toga
- Tsuneaki Suzuki
- Akimasa Sakuma
title: 'Effects of trace elements on the crystal field parameters of Nd ions at the surface of Nd$_2$Fe$_{14}$B grains'
---
INTRODUCTION
============
Rapidly increasing demand for efficient electric motors motivates the development of high-performance Nd-Fe-B magnets. In sintered Nd-Fe-B magnets, Nd is frequently substituted with Dy, owing to Dy’s suppression of coercivity ($H_c$) degradation. However, Dy is expensive and decreases the magnetization of Nd-Fe-B magnets. To realize Dy-free high-performance Nd-Fe-B magnets, we must understand the $H_c$ mechanism of rare-earth (Re) permanent magnets. Although the $H_c$ mechanism has been discussed for sintered Nd-Fe-B magnets,[@r1; @r2; @r3] our understanding of $H_c$ is incomplete, requiring further examination.
Recent papers emphasized that the development of high-coercivity Nd-Fe-B magnets requires understanding their microstructure, especially the grain boundary (GB) phase surrounding the Nd$_2$Fe$_{14}$B grains.[@r4; @r5] Researchers have reported that the intergranular Nd-rich phase includes neodymium oxides (NdO$_x$) with diverse crystal structures (e.g., fcc, hcp), suggesting that O atoms must exist near Nd atoms at the interface between the Nd-rich phase and Nd$_2$Fe$_{14}$B grains.[@r6; @r7] Recently, Amin [*et al.*]{}[@r8] confirmed the segregation of Cu to the NdO$_x$/Nd$_2$Fe$_{14}$B interface after annealing, suggesting that the magnetic anisotropy constant $K_u$ grains are lapped by a Cu-rich layer. Thus, O and Cu atoms are considered to stay around the Nd ions at the interfaces, playing a key role for the coercive force of Nd-Fe-B sintered magnets.
From theoretical viewpoint, it is widely accepted that the magnetic anisotropy of rare earth magnets is mainly dominated by the 4f electrons in the rare earth ions, because of their strongly anisotropic distribution due to their strong intra-atomic interactions such as electron-correlation and $L$-$S$ coupling. The one-electron treatments based on the local density functional approximation have not yet been successfully reproducing this feature in a quantitative level, in contrast to the 3d electronic systems. To overcome this problem, crystalline electric field theory combined with the atomic many-body theory has been adopted by many workers to study the magnetic anisotropy. In 1988, Yamada [*et al.*]{}[@yamada] successfully reproduced magnetization curves reflecting magnetic anisotropy of the series of Re$_2$Fe$_{14}$B, using the crystal field parameters $A_l^m$ as adjustable parameters. In 1992, the first principles calculations to obtain the $A_l^m$ were performed by Richter [*et al.*]{}[@a20_1] for ReCo$_5$ system and Fähnle [*et al.*]{}[@a20_2] for Re$_2$Fe$_{14}$B system.
Based on this concept, Moriya [*et al.*]{}[@r9] showed via first-principles calculations that the crystal field parameter $A_2^0$ on the Nd ion exhibits a negative value when the Nd ion in the (001) planes is exposed to vacuum. As shown by Yamada [*et al.*]{}[@yamada], the magnetic anisotropy constant $K_u$ originated from rare earth ion is approximately proportional to $A_2^0$ when the exchange field acting on the 4f electrons in a rare earth ion is sufficiently strong. Since the proportional coefficient is positive for Nd ion, negative $A_2^0$ implies the planar magnetic anisotropy. Furthermore, Mitsumata [*et al.*]{}[@r10] demonstrated that a single surface atomic layer with a negative $K_u$ value dramatically decreases $H_c$. In physical sintered magnets, however, the grain surfaces are not exposed to vacuum but instead face GB phases. Therefore, our next step is studying how interface elements in the GB phases adjacent to Nd ions affect the $A_2^0$ values at the Nd-Fe-B grain surface. However, note that, in an actual system, many atoms interact with surface Nd ions and many possible configurations exist near the interface between GB and Nd$_2$Fe$_{14}$B phases. In this case, it is important from a theoretical standpoint to provide separate information on the positional ($r, \theta$) dependence of individual atoms on the local $K_u$ (i.e., $A_2^0$) of Nd ions at the grain surface. These analyses may provide useful information to judge the factors dominating the coercive force during experimental observation of atomic configurations in real systems in the future.
In this study, we investigate the influence of O and Cu atoms on the $A_2^0$ of the Nd ion placed at the surface of Nd$_2$Fe$_{14}$B grains via first-principles calculations. As the sign of the single-site $K_u$ of an Nd ion is the same as that of $A_2^0$, the evaluation of $A_2^0$ is useful to understand how trace elements affect $K_u$ at the surface of Nd${_2}$Fe${_{14}}$B. We select O and Cu as trace elements on the basis of experimental results.
COMPUTATIONAL DETAILS
=====================
![\[f1\]The geometric relationship between the Nd ion on the surface of Nd$_2$Fe$_{14}$B and the trace element for the (a)(001) and (b)(110) surface slab models. Here, $r$ indicates the distance between the Nd ion and the trace element, and $\theta$ indicates the angle between the c-axis of Nd$_2$Fe$_{14}$B and the direction of $r$. This figure is plotted by using VESTA.[@vesta]](fig/rfig01.pdf){width="8.5cm"}
Electronic structure calculations were performed by density functional theory using the Vienna ab initio simulation package (VASP 4.6). The 4f electrons in the Nd ions were treated as core electrons in the electronic structure calculations for the valence electrons, based on the concept mentioned in the previous section. The ionic potentials are described by projection-augmented-wave (PAW) method[@paw] and the exchange-correlation energy of the electrons is described within a generalized gradient approximation (GGA). We used the exchange-correlation function determined by Ceperly and Alder and parametrized by Perdew and Zunger.[@GGA] We examined the (001) and (110) surfaces of Nd$_2$Fe$_{14}$B with the addition of the trace element using slab models. Figure\[f1\] shows the geometric relationship between the Nd ion at the surface of Nd$_2$Fe$_{14}$B and the trace element for the (001) and (110) surface models. We placed the trace element at various distances $r$ around the Nd ion at the surface, and at various angles $\theta$ between the c-axis of Nd$_2$Fe$_{14}$B and the direction of $r$. In the (001) surface model (Fig.\[f1\](a)), this unit cell has a vacuum layer equivalent to the thickness of the Nd$_2$Fe$_{14}$B unit cell along the c-axis (12.19[Å]{}) and consists of 12 Nd, 58 Fe, and six B atoms. In the (110) surface model (Fig.\[f1\](b)), we restructured the Nd$_2$Fe$_{14}$B unit cell to expose Nd atoms on the (110) surface. The (110) direction in the original unit cell corresponds to the a-axis in the restructured unit cell. The restructured unit cell consists of 12 Nd, 68 Fe, and six B atoms. The lattice constant of the a-axis parallel to the (110) surface is $\sqrt{2}$ and perpendicular to it is $1/\sqrt{2}$ times that of the original Nd$_2$Fe$_{14}$B unit cell.
The (110) surface model has a vacuum layer with the thickness of $8.8/\sqrt{2}=6.22$[
|
{
"pile_set_name": "ArXiv"
}
|
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.