text
stringlengths 37
12.5k
| meta
dict |
|---|---|
---
abstract: 'The purpose of this article is to study the problem of finding sharp lower bounds for the norm of the product of polynomials in the ultraproducts of Banach spaces $(X_i)_{\mathfrak U}$. We show that, under certain hypotheses, there is a strong relation between this problem and the same problem for the spaces $X_i$.'
address: 'IMAS-CONICET'
author:
- Jorge Tomás Rodríguez
title: On the norm of products of polynomials on ultraproducts of Banach spaces
---
Introduction
============
In this article we study the factor problem in the context of ultraproducts of Banach spaces. This problem can be stated as follows: for a Banach space $X$ over a field ${\mathbb K}$ (with ${\mathbb K}={\mathbb R}$ or ${\mathbb K}={\mathbb C}$) and natural numbers $k_1,\cdots, k_n$ find the optimal constant $M$ such that, given any set of continuous scalar polynomials $P_1,\cdots,P_n:X\rightarrow {\mathbb K}$, of degrees $k_1,\cdots,k_n$; the inequality $$\label{problema}
M \Vert P_1 \cdots P_n\Vert \ge \, \Vert P_1 \Vert \cdots \Vert P_n \Vert$$ holds, where $\Vert P \Vert = \sup_{\Vert x \Vert_X=1} \vert P(x)\vert$. We also study a variant of the problem in which we require the polynomials to be homogeneous.
Recall that a function $P:X\rightarrow {\mathbb K}$ is a continuous $k-$homogeneous polynomial if there is a continuous $k-$linear function $T:X^k\rightarrow {\mathbb K}$ for which $P(x)=T(x,\cdots,x)$. A function $Q:X\rightarrow {\mathbb K}$ is a continuous polynomial of degree $k$ if $Q=\sum_{l=0}^k Q_l$ with $Q_0$ a constant, $Q_l$ ($1\leq l \leq k$) an $l-$homogeneous polynomial and $Q_k \neq 0$ .
The factor problem has been studied by several authors. In [@BST], C. Benítez, Y. Sarantopoulos and A. Tonge proved that, for continuous polynomials, inequality (\[problema\]) holds with constant $$M=\frac{(k_1+\cdots + k_n)^{(k_1+\cdots +k_n)}}{k_1^{k_1} \cdots k_n^{k_n}}$$ for any complex Banach space. The authors also showed that this is the best universal constant, since there are polynomials on $\ell_1$ for which equality prevails. For complex Hilbert spaces and homogeneous polynomials, D. Pinasco proved in [@P] that the optimal constant is $$\nonumber
M=\sqrt{\frac{(k_1+\cdots + k_n)^{(k_1+\cdots +k_n)}}{k_1^{k_1} \cdots k_n^{k_n}}}.$$ This is a generalization of the result for linear functions obtained by Arias-de-Reyna in [@A]. In [@CPR], also for homogeneous polynomials, D. Carando, D. Pinasco and the author proved that for any complex $L_p(\mu)$ space, with $dim(L_p(\mu))\geq n$ and $1<p<2$, the optimal constant is $$\nonumber
M=\sqrt[p]{\frac{(k_1+\cdots + k_n)^{(k_1+\cdots +k_n)}}{k_1^{k_1} \cdots k_n^{k_n}}}.$$
This article is partially motivated by the work of M. Lindström and R. A. Ryan in [@LR]. In that article they studied, among other things, a problem similar to (\[problema\]): finding the so called polarization constant of a Banach space. They found a relation between the polarization constant of the ultraproduct $(X_i)_{\mathfrak U}$ and the polarization constant of each of the spaces $X_i$. Our objective is to do an analogous analysis for our problem (\[problema\]). That is, to find a relation between the factor problem for the space $(X_i)_{\mathfrak U}$ and the factor problem for the spaces $X_i$.
In Section 2 we give some basic definitions and results of ultraproducts needed for our discussion. In Section 3 we state and prove the main result of this paper, involving ultraproducts, and a similar result on biduals.
Ultraproducts
=============
We begin with some definitions, notations and basic results on filters, ultrafilters and ultraproducts. Most of the content presented in this section, as well as an exhaustive exposition on ultraproducts, can be found in Heinrich’s article [@H].
A filter ${\mathfrak U}$ on a family $I$ is a collection of non empty subsets of $I$ closed by finite intersections and inclusions. An ultrafilter is maximal filter.
In order to define the ultraproduct of Banach spaces, we are going to need some topological results first.
Let ${\mathfrak U}$ be an ultrafilter on $I$ and $X$ a topological space. We say that the limit of $(x_i)_{i\in I} \subseteq X$ respect of ${\mathfrak U}$ is $x$ if for every open neighborhood $U$ of $x$ the set $\{i\in I: x_i \in U\}$ is an element of ${\mathfrak U}$. We denote $$\displaystyle\lim_{i,{\mathfrak U}} x_i = x.$$
The following is Proposition 1.5 from [@H].
\[buenadef\] Let ${\mathfrak U}$ be an ultrafilter on $I$, $X$ a compact Hausdorff space and $(x_i)_{i\in I} \subseteq X$. Then, the limit of $(x_i)_{i\in I}$ respect of ${\mathfrak U}$ exists and is unique.
Later on, we are going to need the next basic Lemma about limits of ultraproducts, whose proof is an easy exercise of basic topology and ultrafilters.
\[lemlimit\] Let ${\mathfrak U}$ be an ultrafilter on $I$ and $\{x_i\}_{i\in I}$ a family of real numbers. Assume that the limit of $(x_i)_{i\in I} \subseteq {\mathbb R}$ respect of ${\mathfrak U}$ exists and let $r$ be a real number such that there is a subset $U$ of $\{i: r<x_i\}$ with $U\in {\mathfrak U}$. Then $$r \leq \displaystyle\lim_{i,{\mathfrak U}} x_i.$$
We are now able to define the ultraproduct of Banach spaces. Given an ultrafilter ${\mathfrak U}$ on $I$ and a family of Banach spaces $(X_i)_{i\in I}$, take the Banach space $\ell_\infty(I,X_i)$ of norm bounded families $(x_i)_{i\in I}$ with $x_i \in X_i$ and norm $$\Vert (x_i)_{i\in I} \Vert = \sup_{i\in I} \Vert x_i \Vert.$$ The ultraproduct $(X_i)_{\mathfrak U}$ is defined as the quotient space $\ell_\infty(I,X_i)/ \sim $ where $$(x_i)_{i\in I}\sim (y_i)_{i\in I} \Leftrightarrow \displaystyle\lim_{i,{\mathfrak U}} \Vert x_i - y_i \Vert = 0.$$
Observe that Proposition \[buenadef\] assures us that this limit exists for every pair $(x_i)_{i\in I}, (y_i)_{i\in I}\in \ell_\infty(I,X_i)$. We denote the class of $(x_i)_{i\in I}$ in $(X_i)_{\mathfrak U}$ by $(x_i)_{\mathfrak U}$.
The following result is the polynomial version of Definition 2.2 from [@H] (see also Proposition 2.3 from [@LR]). The reasoning behind is almost the same.
\[pollim\] Given two ultraproducts $(X_i)_{\mathfrak U}$, $(Y_i)_{\mathfrak U}$ and a family of continuous homogeneous polynomials $\{P_i\}_{i\in I}$ of degree $k$ with $$\displaystyle\sup_{i\in I} \Vert P_i \Vert < \infty,$$ the map $P:(X_i)_{\mathfrak U}\longrightarrow (Y_i)_{\mathfrak U}$ defined by $P((x_i)_{\mathfrak U})=(P_i(x_i))_{\mathfrak U}$ is a continuous homogeneous polynomial of degree $k$. Moreover $\Vert P \Vert = \displaystyle\lim_{i,{\mathfrak U}} \Vert P_i \Vert$.
If ${\mathbb K}={\mathbb C}$, the hypothesis of homogeneity can be omitted, but in this case the degree of $P$ can be lower than $k$.
Let us start with the homogeneous case. Write $P_i(x)=T_i(x,\cdots,x)$ with $T_i$ a $k-$linear continuous function. Define $T:(X_i)_{\mathfrak U}^k \longrightarrow (Y_i)_{\mathfrak U}$ by $$T((x^1_i)_{\mathfrak U},\cdots,(x^k_i)_{\mathfrak U
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: 'Dark Matter detectors with directional sensitivity have the potential of yielding an unambiguous positive observation of WIMPs as well as discriminating between galactic Dark Matter halo models. In this article, we introduce the motivation for directional detectors, discuss the experimental techniques that make directional detection possible, and review the status of the experimental effort in this field.'
address:
- 'Massachusetts Institute of Technology, 77 Massachusetts Avenue, Cambridge, MA 02139, USA'
- 'Temple University, 1900 N. 13-th Street, Philadelphia, PA 19122, USA'
author:
- G Sciolla
- C J Martoff
bibliography:
- 'all\_DM.bib'
title: Gaseous Dark Matter Detectors
---
Introduction
============
Astronomical and cosmological observations have recently shown that Dark Matter (DM) is responsible for 23% of the energy budget of the Universe and 83% of its mass [@Hinshaw2008]. The most promising candidate for Dark Matter is the so-called Weakly Interacting Massive Particle (WIMP). The existence of WIMPs is independently suggested by considerations of Big Bang cosmology and theoretical supersymmetric particle phenomenology [@LeeWeinberg; @Weinberg82; @Jungman1996].
Over the years, many direct detection experiments have been performed to search for nuclear recoils due to elastic scattering of WIMPs off the nuclei in the active volume of the detector. The main challenge for these experiments is to suppress the backgrounds that mimic WIMP-induced nuclear recoils. Today’s leading experiments have achieved excellent rejection of electromagnetic backgrounds, i.e., photons, electrons and alpha particles, that have a distinct signature in the detector. However, there are sources of background for which the detector response is nearly identical to that of a WIMP-induced recoil, such as the coherent scattering of neutrinos from the sun [@Monroe2007], or the elastic scattering of neutrons produced either by natural radioactivity or by high-energy cosmic rays.
While neutron and neutrino interactions do not limit today’s experiments, they are expected to become dangerous sources of background when the scale of DM experiments grows to fiducial masses of several tons. In traditional counting experiments, the presence of such backgrounds could undermine the unambiguous identification of a Dark Matter signal because neutrinos are impossible to suppress by shielding and underground neutron backgrounds are notoriously difficult to predict [@Mei2006].
An unambiguous positive identification of a Dark Matter signal even in presence of unknown amounts of irreducible backgrounds could still be achieved if one could correlate the observation of a nuclear recoil in the detector with some unique astrophysical signature which no background could mimic. This is the idea that motivates directional detection of Dark Matter.
The Dark Matter Wind
---------------------
The observed rotation curve of our Galaxy suggests that at the galactic radius of the sun the galactic potential has a significant contribution from Dark Matter. The Dark Matter distribution in our Galaxy, however, is poorly constrained. A commonly used DM distribution, the standard dark halo model [@SmithLewin1990], assumes a non-rotating, isothermal sphere extending out to 50 kpc from the galactic center. The DM velocity is described by a Maxwell-Boltzmann distribution with dispersion $\sigma_v=155$ km/s. Concentric with the DM halo is the galactic disk of luminous ordinary matter, rotating with respect to the halo, with an average orbital velocity of about 220 km/s at the radius of the solar system. Therefore in this model, an observer on Earth would see a wind of DM particles with average velocity of 220 km/s.
The Dark Matter wind creates two observable effects. The first was pointed out in 1986 by Drukier, Freese, and Spergel [@Drukier1986] who predicted that the Earth’s motion relative to the galactic halo leads to an annual modulation of the rates of interactions observed above a certain threshold in direct detection experiments. In its annual rotation around the sun, the Earth’s orbital velocity has a component that is anti-parallel to the DM wind during the summer, and parallel to it during the winter. As a result, the apparent velocity of the DM wind will increase (decrease) by about 10% in summer (winter), leading to a corresponding increase (decrease) of the observed rates in DM detectors. Unfortunately, this effect is difficult to detect because the seasonal modulation is expected to be small (a few %) and very hard to disentangle from other systematic effects, such as the seasonal dependence of background rates. These experimental difficulties cast a shadow on the recent claimed observation of the yearly asymmetry by the DAMA/LIBRA collaboration [@Bernabei2008].
A larger modulation of the WIMP signal was pointed out by Spergel [@Spergel] in 1988. The Earth spins around its axis with a period of 24 sidereal hours. Because its rotation axis is oriented at 48$^\circ$ with respect to the direction of the DM wind, an observer on Earth sees the average direction of the WIMPs change by 96$^\circ$ every 12 sidereal hours. This modulation in arrival direction should be resolvable by a Dark Matter directional detector, e.g., a detector able to determine the direction of the DM particles. Most importantly, no known background is correlated with the direction of the DM wind. Therefore, a directional detector could hold the key to the unambiguous observation of Dark Matter.
In addition to background rejection, the determination of the direction of the arrival of Dark Matter particles can discriminate [@Copi1999; @Vergados2003; @Morgan2004; @Freese2005; @Alenazi2008] between various DM halo distributions including the standard dark halo model, models with streams of WIMPs, the Sikivie late-infall halo model [@Sikivie1999; @Tkachev1997; @Sikivie1995], and other anisotropic models. The discrimination power is further enhanced if a determination of the sense as well as the direction of WIMPs is possible [@Green2007]. This capability makes directional detectors unique observatories for underground WIMP astronomy.
Directional Dark Matter Detection
-----------------------------------
When Dark Matter particles interact with regular matter, they scatter elastically off the atoms and generate nuclear recoils with typical energies $E_R$ of a few tens of keV, as explained in more detail in section \[NuclearRecoils\]. The direction of the recoiling nucleus encodes the direction of the incoming DM particle. To observe the daily modulation in the direction of the DM wind, an angular resolution of 20–30 degrees in the reconstruction of the recoil nucleus is sufficient, because the intrinsic spread in direction of the DM wind is $\approx$ 45 degrees. Assuming that sub-millimeter tracking resolution can be achieved, the length of a recoil track has to be of at least 1–2 mm, which can be obtained by using a very dilute gas as a target material.
An ideal directional detector should provide a 3-D vector reconstruction of the recoil track with a spatial resolution of a few hundred microns in each coordinate, and combine a very low energy threshold with an excellent background rejection capability. Such a detector would be able to reject isotropy of the recoil direction, and hence identify the signature of a WIMP wind, with just a handful of events [@Morgan2004].
More recently, Green and Morgan [@Green2007] studied how the number of events necessary to detect the WIMP wind depends on the detector performance in terms of energy threshold, background rates, 2-D versus 3-D reconstruction of the nuclear recoil, and ability to determine the sense of the direction by discriminating between the “head” and “tail” of the recoil track. The default configuration used for this study assumes a CS$_2$ gaseous TPC running at 0.05 bar using 200 $\mu$m pixel readout providing 3-D reconstruction of the nuclear recoil and “head-tail” discrimination. The energy threshold is assumed to be 20 keV, with perfect background rejection. In such a configuration, 7 events would be sufficient to establish observation of the WIMP wind at 90% C.L.. In presence of background with S/N=1, the number of events necessary to reject isotropy would increase by a factor 2. If only 2D reconstruction is available, the required number of events doubles compared to the default configuration. “Head-tail” discrimination turns out to be the most important capability: if the sense cannot be measured, the number of events necessary to observe the effects of the WIMP wind increases by one order of magnitude.
Nuclear Recoils in Gaseous Detectors {#NuclearRecoils}
====================================
To optimize the design of gaseous detectors for directional detection of Dark Matter one must be able to calculate the recoil atom energy spectrum expected for a range of WIMP parameters and halo models. The detector response in the relevant energy range must also be predictable. The response will be governed first and foremost by the track length and characteristics (multiple scattering) as a function of recoil atom type and energy. Since gas detectors require ionization for detection, design also requires knowledge of the ionization yield in gas and its distribution along the track as a function of recoil atom type and energy, and possibly electric field.
The large momentum transfer necessary to produce a detectable recoil in gas implies that the scattering atom can be treated as a free particle, making calculations of the recoil spectrum essentially independent of whether the target is a solid, liquid, or gas.
An estimate of the maximum Dark Matter recoil energy for simple halo models is given by the kinematically allowed energy transfer from an infinitely heavy halo WIMP with velocity equal to the galactic escape speed. This speed is locally about 500-600 km/sec [@rave]; W
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: 'The aim of this paper is to establish a global asymptotic equivalence between the experiments generated by the discrete (high frequency) or continuous observation of a path of a Lévy process and a Gaussian white noise experiment observed up to a time $T$, with $T$ tending to $\infty$. These approximations are given in the sense of the Le Cam distance, under some smoothness conditions on the unknown Lévy density. All the asymptotic equivalences are established by constructing explicit Markov kernels that can be used to reproduce one experiment from the other.'
address:
- '*Laboratoire LJK, Université Joseph Fourier UMR 5224 51, Rue des Mathématiques, Saint Martin d’Hères BP 53 38041 Grenoble Cedex 09*'
- 'Corresponding Author, Ester.Mariucci@imag.fr'
author:
- Ester Mariucci
bibliography:
- 'refs.bib'
title: Asymptotic equivalence for pure jump Lévy processes with unknown Lévy density and Gaussian white noise
---
Nonparametric experiments,Le Cam distance,asymptotic equivalence,Lévy processes. 62B15,(62G20,60G51).
Introduction
============
Lévy processes are a fundamental tool in modelling situations, like the dynamics of asset prices and weather measurements, where sudden changes in values may happen. For that reason they are widely employed, among many other fields, in mathematical finance. To name a simple example, the price of a commodity at time $t$ is commonly given as an exponential function of a Lévy process. In general, exponential Lévy models are proposed for their ability to take into account several empirical features observed in the returns of assets such as heavy tails, high-kurtosis and asymmetry (see [@tankov] for an introduction to financial applications).
From a mathematical point of view, Lévy processes are a natural extension of the Brownian motion which preserves the tractable statistical properties of its increments, while relaxing the continuity of paths. The jump dynamics of a Lévy process is dictated by its Lévy density, say $f$. If $f$ is continuous, its value at a point $x_0$ determines how frequent jumps of size close to $x_0$ are to occur per unit time. Concretely, if $X$ is a pure jump Lévy process with Lévy density $f$, then the function $f$ is such that $$\int_Af(x)dx=\frac{1}{t}{\ensuremath {\mathbb{E}}}\bigg[\sum_{s\leq t}{\ensuremath {\mathbb{I}}}_A(\Delta X_s)\bigg],$$ for any Borel set $A$ and $t>0$. Here, $\Delta X_s\equiv X_s-X_{s^-}$ denotes the magnitude of the jump of $X$ at time $s$ and ${\ensuremath {\mathbb{I}}}_A$ is the characteristic function. Thus, the Lévy measure $$\nu(A):=\int_A f(x)dx,$$ is the average number of jumps (per unit time) whose magnitudes fall in the set $A$. Understanding the jumps behavior, therefore requires to estimate the Lévy measure. Several recent works have treated this problem, see e.g. [@bel15] for an overview.
When the available data consists of the whole trajectory of the process during a time interval $[0,T]$, the problem of estimating $f$ may be reduced to estimating the intensity function of an inhomogeneous Poisson process (see, e.g. [@fig06; @rey03]). However, a continuous-time sampling is never available in practice and thus the relevant problem is that of estimating $f$ based on discrete sample data $X_{t_0},\dots,X_{t_n}$ during a time interval $[0,T_n]$. In that case, the jumps are latent (unobservable) variables and that clearly adds to the difficulty of the problem. From now on we will place ourselves in a high-frequency setting, that is we assume that the sampling interval $\Delta_n=t_i-t_{i-1}$ tends to zero as $n$ goes to infinity. Such a high-frequency based statistical approach has played a central role in the recent literature on nonparametric estimation for Lévy processes (see e.g. [@fig09; @comte10; @comte11; @bec12; @duval12]). Moreover, in order to make consistent estimation possible, we will also ask the observation time $T_n$ to tend to infinity in order to allow the identification of the jump part in the limit.
Our aim is to prove that, under suitable hypotheses, estimating the Lévy density $f$ is equivalent to estimating the drift of an adequate Gaussian white noise model. In general, asymptotic equivalence results for statistical experiments provide a deeper understanding of statistical problems and allow to single out their main features. The idea is to pass via asymptotic equivalence to another experiment which is easier to analyze. By definition, two sequences of experiments ${\ensuremath {\mathscr{P}}}_{1,n}$ and ${\ensuremath {\mathscr{P}}}_{2,n}$, defined on possibly different sample spaces, but with the same parameter set, are asymptotically equivalent if the Le Cam distance $\Delta({\ensuremath {\mathscr{P}}}_{1,n},{\ensuremath {\mathscr{P}}}_{2,n})$ tends to zero. For ${\ensuremath {\mathscr{P}}}_{i}=({\ensuremath {\mathscr{X}}}_i,{\ensuremath {\mathscr{A}}}_i, \big(P_{i,\theta}:\theta\in\Theta)\big)$, $i=1,2$, $\Delta({\ensuremath {\mathscr{P}}}_1,{\ensuremath {\mathscr{P}}}_2)$ is the symmetrization of the deficiency $\delta({\ensuremath {\mathscr{P}}}_1,{\ensuremath {\mathscr{P}}}_2)$ where $$\delta({\ensuremath {\mathscr{P}}}_{1},{\ensuremath {\mathscr{P}}}_{2})=\inf_K\sup_{\theta\in\Theta}\big\|KP_{1,\theta}-P_{2,\theta}\big\|_{TV}.$$ Here the infimum is taken over all randomizations from $({\ensuremath {\mathscr{X}}}_1,{\ensuremath {\mathscr{A}}}_1)$ to $({\ensuremath {\mathscr{X}}}_2,{\ensuremath {\mathscr{A}}}_2)$ and $\| \cdot \|_{TV}$ denotes the total variation distance. Roughly speaking, the Le Cam distance quantifies how much one fails to reconstruct (with the help of a randomization) a model from the other one and vice versa. Therefore, we say that $\Delta({\ensuremath {\mathscr{P}}}_1,{\ensuremath {\mathscr{P}}}_2)=0$ can be interpreted as “the models ${\ensuremath {\mathscr{P}}}_1$ and ${\ensuremath {\mathscr{P}}}_2$ contain the same amount of information about the parameter $\theta$.” The general definition of randomization is quite involved but, in the most frequent examples (namely when the sample spaces are Polish and the experiments dominated), it reduces to that of a Markov kernel. One of the most important feature of the Le Cam distance is that it can be also interpreted in terms of statistical decision theory (see [@lecam; @LC2000]; a short review is presented in the Appendix). As a consequence, saying that two statistical models are equivalent means that any statistical inference procedure can be transferred from one model to the other in such a way that the asymptotic risk remains the same, at least for bounded loss functions. Also, as soon as two models, ${\ensuremath {\mathscr{P}}}_{1,n}$ and ${\ensuremath {\mathscr{P}}}_{2,n}$, that share the same parameter space $\Theta$ are proved to be asymptotically equivalent, the same result automatically holds for the restrictions of both ${\ensuremath {\mathscr{P}}}_{1,n}$ and ${\ensuremath {\mathscr{P}}}_{2,n}$ to a smaller subclass of $\Theta$.
Historically, the first results of asymptotic equivalence in a nonparametric context date from 1996 and are due to [@BL] and [@N96]. The first two authors have shown the asymptotic equivalence of nonparametric regression and a Gaussian white noise model while the third one those of density estimation and white noise. Over the years many generalizations of these results have been proposed such as [@regression02; @GN2002; @ro04; @C2007; @cregression; @R2008; @C2009; @R2013; @schmidt14] for nonparametric regression or [@cmultinomial; @j03; @BC04] for nonparametric density estimation models. Another very active field of study is that of diffusion experiments. The first result of equivalence between diffusion models and Euler scheme was established in 1998, see [@NM]. In later papers generalizations of this result have been considered (see [@C14; @esterdiffusion]). Among others we can also cite equivalence results for generalized linear models [@GN], time series [@GN2006; @NM], diffusion models [@D; @CLN; @R2006; @rmultidimensionale], GARCH model [@B], functional linear regression [@M2011], spectral density estimation [@GN2010] and volatility estimation [@R11]. Negative results are somewhat harder to come by; the most notable among them are [@sam96; @B98; @wang02]. There is however a lack of equivalence results concerning processes with jumps. A first result in this sense is [@esterESAIM] in which global asymptotic equivalences between the experiments generated by the discrete or continuous observation of a path of a Lévy process and a Gaussian white noise experiment are established. More precisely, in that paper, we have shown that estimating the drift function $h$ from a continuously or discretely (high frequency) time inhomogeneous jump-diffusion process: $$\label{ch4X}
X_t=\
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: |
We give a general construction of debiased/locally robust/orthogonal (LR) moment functions for GMM, where the derivative with respect to first step nonparametric estimation is zero and equivalently first step estimation has no effect on the influence function. This construction consists of adding an estimator of the influence function adjustment term for first step nonparametric estimation to identifying or original moment conditions. We also give numerical methods for estimating LR moment functions that do not require an explicit formula for the adjustment term.
LR moment conditions have reduced bias and so are important when the first step is machine learning. We derive LR moment conditions for dynamic discrete choice based on first step machine learning estimators of conditional choice probabilities.
We provide simple and general asymptotic theory for LR estimators based on sample splitting. This theory uses the additive decomposition of LR moment conditions into an identifying condition and a first step influence adjustment. Our conditions require only mean square consistency and a few (generally either one or two) readily interpretable rate conditions.
LR moment functions have the advantage of being less sensitive to first step estimation. Some LR moment functions are also doubly robust meaning they hold if one first step is incorrect. We give novel classes of doubly robust moment functions and characterize double robustness. For doubly robust estimators our asymptotic theory only requires one rate condition.
Keywords: Local robustness, orthogonal moments, double robustness, semiparametric estimation, bias, GMM.
JEL classification:
: C13; C14; C21; D24
author:
- |
Victor Chernozhukov\
*MIT*
- |
Juan Carlos Escanciano\
*Indiana University*
- |
Hidehiko Ichimura\
*University of Tokyo*
- |
Whitney K. Newey\
*MIT*
- |
James M. Robins\
*Harvard University*
date: April 2018
title: Locally Robust Semiparametric Estimation
---
Introduction
============
There are many economic parameters that depend on nonparametric or large dimensional first steps. Examples include dynamic discrete choice, games, average consumer surplus, and treatment effects. This paper shows how to construct moment functions for GMM estimators that are debiased/locally robust/orthogonal (LR), where moment conditions have a zero derivative with respect to the first step. We show that LR moment functions can be constructed by adding the influence function adjustment for first step estimation to the original moment functions. This construction can also be interpreted as a decomposition of LR moment functions into identifying moment functions and a first step influence function term. We use this decomposition to give simple and general conditions for root-n consistency and asymptotic normality, with different properties being assumed for the identifying and influence function terms. The conditions are easily interpretable mean square consistency and second order remainder conditions based on estimated moments that use cross-fitting (sample splitting). We also give numerical estimators of the influence function adjustment.
LR moment functions have several advantages. LR moment conditions bias correct in a way that eliminates the large biases from plugging in first step machine learning estimators found in Belloni, Chernozhukov, and Hansen (2014). LR moment functions can be used to construct debiased/double machine learning (DML) estimators, as in Chernozhukov et al. (2017, 2018).
We illustrate by deriving LR moment functions for dynamic discrete choice estimation based on conditional choice probabilities. We provide a DML estimator for dynamic discrete choice that uses first step machine learning of conditional choice probabilities. We find that it performs well in a Monte Carlo example. Such structural models provide a potentially important application of DML, because of potentially high dimensional state spaces. Adding the first step influence adjustment term provides a general way to construct LR moment conditions for structural models so that machine learning can be used for first step estimation of conditional choice probabilities, state transition distributions, and other unknown functions on which structural estimators depend.
LR moment conditions also have the advantage of being relatively insensitive to small variation away from the first step true function. This robustness property is appealing in many settings where it may be difficult to get the first step completely correct. Many interesting and useful LR moment functions have the additional property that they are doubly robust (DR), meaning moment conditions hold when one first step is not correct. We give novel classes of DR moment conditions, including for average linear functionals of conditional expectations and probability densities. The construction of adding the first step influence function adjustment to an identifying moment function is useful to obtain these moment conditions. We also give necessary and sufficient conditions for a large class of moment functions to be DR. We find DR moments have simpler and more general conditions for asymptotic normality, which helps motivate our consideration of DR moment functions as special cases of LR ones. LR moment conditions also help minimize sensitivity to misspecification as in Bonhomme and Weidner (2018).
LR moment conditions have smaller bias from first step estimation. We show that they have the small bias property of Newey, Hsieh, and Robins (2004), that the bias of the moments is of smaller order than the bias of the first step. This bias reduction leads to substantial improvements in finite sample properties in many cases relative to just using the original moment conditions. For dynamic discrete choice we find large bias reductions, moderate variance increases and even reductions in some cases, and coverage probabilities substantially closer to nominal. For machine learning estimators of the partially linear model, Chernozhukov et al. (2017, 2018) found bias reductions so large that the LR estimator is root-n consistent but the estimator based on the original moment condition is not. Substantial improvements were previously also found for density weighted averages by Newey, Hsieh, and Robins (2004, NHR). The twicing kernel estimators in NHR are numerically equal to LR estimators based on the original (before twicing) kernel, as shown in Newey, Hsieh, Robins (1998), and the twicing kernel estimators were shown to have smaller mean square error in large samples. Also, a Monte Carlo example in NHR finds that the mean square error (MSE) of the LR estimator has a smaller minimum and is flatter as a function of bandwidth than the MSE of Powell, Stock, and Stoker’s (1989) density weighted average derivative estimator. We expect similar finite sample improvements from LR moments in other cases.
LR moment conditions have appeared in earlier work. They are semiparametric versions of Neyman (1959) C-alpha test scores for parametric models. Hasminskii and Ibragimov (1978) suggested LR estimation of functionals of a density and argued for their advantages over plug-in estimators. Pfanzagl and Wefelmeyer (1981) considered using LR moment conditions for improving the asymptotic efficiency of functionals of distribution estimators. Bickel and Ritov (1988) gave a LR estimator of the integrated squared density that attains root-n consistency under minimal conditions. The Robinson (1988) semiparametric regression and Ichimura (1993) index regression estimators are LR. Newey (1990) showed that LR moment conditions can be obtained as residuals from projections on the tangent set in a semiparametric model. Newey (1994a) showed that derivatives of an objective function where the first step has been “concentrated out” are LR, including the efficient score of a semiparametric model. NHR (1998, 2004) gave estimators of averages that are linear in density derivative functionals with remainder rates that are as fast as those in Bickel and Ritov (1988). Doubly robust moment functions have been constructed by Robins, Rotnitzky, and Zhao (1994, 1995), Robins and Rotnitzky (1995), Scharfstein, Rotnitzky, and Robins (1999), Robins, Rotnitzky, and van der Laan (2000), Robins and Rotnitzky (2001), Graham (2011), and Firpo and Rothe (2017). They are widely used for estimating treatment effects, e.g. Bang and Robins (2005). Van der Laan and Rubin (2006) developed targeted maximum likelihood to obtain a LR estimating equation based on the efficient influence function of a semiparametric model. Robins et al. (2008, 2017) showed that efficient influence functions are LR, characterized some doubly robust moment conditions, and developed higher order influence functions that can reduce bias. Belloni, Chernozhukov, and Wei (2013), Belloni, Chernozhukov, and Hansen (2014), Farrell (2015), Kandasamy et al. (2015), Belloni, Chernozhukov, Fernandez-Val, and Hansen (2016), and Athey, Imbens, and Wager (2017) gave LR estimators with machine learning first steps in several specific contexts.
A main contribution of this paper is the construction of LR moment conditions from any moment condition and first step estimator that can result in a root-n consistent estimator of the parameter of interest. This construction is based on the limit of the first step when a data observation has a general distribution that allows for misspecification, similarly to Newey (1994). LR moment functions are constructed by adding to identifying moment functions the influence function of the true expectation of the identifying moment functions evaluated at the first step limit, i.e. by adding the influence function term that accounts for first step estimation. The addition of the influence adjustment “partials out” the first order effect of the first step on the moments. This construction of LR moments extends those cited above for first step density and distribution estimators to *any first step,* including instrumental variable estimators. Also, this construction is *estimator based* rather than model based
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: 'In state space models, smoothing refers to the task of estimating a latent stochastic process given noisy measurements related to the process. We propose an unbiased estimator of smoothing expectations. The lack-of-bias property has methodological benefits: independent estimators can be generated in parallel, and confidence intervals can be constructed from the central limit theorem to quantify the approximation error. To design unbiased estimators, we combine a generic debiasing technique for Markov chains with a Markov chain Monte Carlo algorithm for smoothing. The resulting procedure is widely applicable and we show in numerical experiments that the removal of the bias comes at a manageable increase in variance. We establish the validity of the proposed estimators under mild assumptions. Numerical experiments are provided on toy models, including a setting of highly-informative observations, and a realistic Lotka-Volterra model with an intractable transition density.'
author:
- |
Pierre E. Jacob[^1]\
Department of Statistics, Harvard University\
Fredrik Lindsten and Thomas B. Schön\
Department of Information Technology, Uppsala University
bibliography:
- 'Biblio.bib'
title: '**Smoothing with Couplings of Conditional Particle Filters**'
---
\#1
[*Keywords:*]{} couplings, particle filtering, particle smoothing, debiasing techniques, parallel computation.
Introduction\[sec:introduction\]
================================
Goal and content
----------------
In state space models, the observations are treated as noisy measurements related to an underlying latent stochastic process. The problem of smoothing refers to the estimation of trajectories of the underlying process given the observations [@cappe:ryden:2004]. For finite state spaces and linear Gaussian models, smoothing can be performed exactly. In general models, numerical approximations are required, and many state-of-the-art methods are based on particle methods [@douc:moulines:2014; @kantas2015particle]. Following this line of work, we propose a new method for smoothing in general state space models. Unlike existing methods, the proposed estimators are unbiased, which has direct benefits for parallelization and for the construction of confidence intervals.
The proposed method combines recently proposed conditional particle filters [@andrieu:doucet:holenstein:2010] with debiasing techniques for Markov chains [@glynn2014exact]. Specifically, we show in Section \[sec:unbiasedsmoothing\] how to remove the bias of estimators constructed with conditional particle filters, in exchange for an increase of variance; this variance can then be controlled with tuning parameters, and arbitrarily reduced by averaging over independent replicates. The validity of the proposed approach relies on the finiteness of the computational cost and of the variance of the proposed estimators, which we establish under mild conditions in Section \[sec:newsmoother:theory\]. Methodological improvements are presented in Section \[sec:newsmoother:practical\], and comparisons with other smoothers in Section \[sec:comparison\]. Numerical experiments are provided in Section \[sec:numerics\], and Section \[sec:discussion\] concludes.
Smoothing in state space models \[sec:intro:smoothing\]
-------------------------------------------------------
The latent stochastic process $(x_{t})_{t\geq 0}$ takes values in $\mathbb{X}\subset
\mathbb{R}^{d_x}$, and the observations $(y_t)_{t\geq 1}$ are in $\mathbb{Y}\subset
\mathbb{R}^{d_y}$ for some $d_x,d_y \in\mathbb{N}$. A model specifies an initial distribution $m_0(dx_{0}|\theta)$ and a transition kernel $f(dx_{t}| x_{t-1},\theta)$ for the latent process. We will assume that we have access to deterministic functions $M$ and $F$, and random variables $U_t$ for $t\geq 0$, such that $M(U_0,\theta)$ follows $m_0(dx_0|\theta)$ and $F(x_{t-1},U_t,\theta)$ follows $f(dx_t|x_{t-1},\theta)$; we refer to these as random function representations of the process [see @diaconis1999iterated]. Conditionally upon the latent process, the observations are independent and their distribution is given by a measurement kernel $g(dy_{t}| x_{t},\theta)$. The model is parameterized by $\theta\in\Theta\subset \mathbb{R}^{d_\theta}$, for $d_\theta\in\mathbb{N}$. Filtering consists in approximating the distribution $p(dx_{t}|
y_{1:t},\theta)$ for all times $t\geq 1$, whereas smoothing refers to the approximation of $p(dx_{0:T}|y_{1:T},\theta)$ for a fixed time horizon $T$, where for $s,t\in\mathbb{N}$, we write $s:t$ for the set $\{s,\ldots,t\}$, and $v_{s:t}$ for the vector $(v_s,\ldots,v_t)$. The parameter $\theta$ is hereafter fixed and removed from the notation, as is usually done in the smoothing literature [see Section 4 in @kantas2015particle]; we discuss unknown parameters in Section \[sec:discussion\]. Denote by $h$ a test function from $\mathbb{X}^{T+1}$ to $\mathbb{R}$, of which we want to compute the expectation with respect to the smoothing distribution $\pi(dx_{0:T})=p(dx_{0:T}|y_{1:T})$; we write $\pi(h)$ for $\int_{\mathbb{X}^{T+1}} h(x_{0:T}) \pi(dx_{0:T})$. For instance, with $h:x_{0:T}\mapsto x_t$ where $t\in 0:T$, $\pi(h)$ is the smoothing expectation $\mathbb{E}[x_t|y_{1:T}]$.
Postponing a discussion on existing smoothing methods to Section \[sec:comparison\], we first describe the conditional particle filter [CPF, @andrieu:doucet:holenstein:2010], which is a variant of the particle filter [@doucet:defreitas:gordon:2001]. Given a “reference” trajectory $X = x_{0:T}$, a CPF generates a new trajectory $X^\prime = x_{0:T}^\prime$ as described in Algorithm \[alg:conditional-particle-filter\], which defines a Markov kernel on the space of trajectories; we will write $x^\prime_{0:T} \sim \text{CPF}(x_{0:T},\cdot)$. This Markov kernel leaves $\pi$ invariant and ergodic averages of the resulting chains consistently estimate integrals with respect to $\pi$, under mild conditions [@andrieu:doucet:holenstein:2010; @ChopinS:2015; @LindstenDM:2015; @andrieuvihola2013uniform; @kuhlenschmidt2018stability; @Lee2018ccbpf]. We denote by $(X^{(n)})_{n\geq 0}$ a chain starting from a path $X^{(0)}$, and iterating through $X^{(n)}\sim\text{CPF}(X^{(n-1)},\cdot)$ for $n\geq 1$.
1. 2.
<!-- -->
1. 2. 3.
<!-- -->
1. 2.
In step 2.1. of Algorithm \[alg:conditional-particle-filter\], the resampling distribution $r(da^{1:N-1}|w^{1:N})$ refers to a distribution on $\{1,\ldots,N\}^{N-1}$ from which “ancestors” are drawn according to particle weights. The resampling distribution is an algorithmic choice; specific schemes for the conditional particle filter are described in @ChopinS:2015. Here we will use multinomial resampling throughout. In step 2.3., “normalize the weights” means dividing them by their sum. Instead of bootstrap particle filters [@gordon:salmon:smith:1993], where particles are propagated from the model transition, more sophisticated filters can readily be used in the CPF procedure. For instance, performance gains can be obtained with auxiliary particle filters [@pitt1999filtering; @johansen2008note], as illustrated in Section \[sec:numerics:hiddenar\]. In presenting algorithms we focus on bootstrap particle filters for simplicity. When the transition density is tractable, extensions of the CPF include backward sampling [@whiteleycommentonpmcmc; @LindstenS:2013] and ancestor sampling [@LindstenJS:2014], which is beneficial in the proposed approach as illustrated in Section \[sec:numerics:hiddenar\]. The complexity of a standard CPF update is of order $NT$, and the memory requirements are of order $T + N\log N$ [@jacob2015path].
The proposed method relies on CPF kernels but is different from Markov chain Monte Carlo (MCMC) estimators: it involves independent copies of unbiased estimators of $\pi(h)$. Thus it will be amenable to parallel computation and confidence intervals will be constructed in a different way than with standard MCMC output [e.g. Chapter 7 in @gelman2010handbook]; see Section \[sec:comparison\] for a comparison with existing smoothers.
Debiasing Markov chains \[sec:debiasing\]
-----------------------------------------
We briefly recall the debiasing technique of @glynn2014exact, see also @McLeish:2011 [@Rhee:Glynn:
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: 'We analytically derive the upper bound on the overall efficiency of single-photon generation based on cavity quantum electrodynamics (QED), where cavity internal loss is treated explicitly. The internal loss leads to a tradeoff relation between the internal generation efficiency and the escape efficiency, which results in a fundamental limit on the overall efficiency. The corresponding lower bound on the failure probability is expressed only with an “internal cooperativity," introduced here as the cooperativity parameter with respect to the cavity internal loss rate. The lower bound is obtained by optimizing the cavity external loss rate, which can be experimentally controlled by designing or tuning the transmissivity of the output coupler. The model used here is general enough to treat various cavity-QED effects, such as the Purcell effect, on-resonant or off-resonant cavity-enhanced Raman scattering, and vacuum-stimulated Raman adiabatic passage. A repumping process, where the atom is reused after its decay to the initial ground state, is also discussed.'
author:
- 'Hayato Goto,$^1$ Shota Mizukami,$^2$ Yuuki Tokunaga,$^3$ and Takao Aoki$^2$'
title: 'Fundamental Limit on the Efficiency of Single-Photon Generation Based on Cavity Quantum Electrodynamics'
---
*Introduction*. Single-photon sources are a key component for photonic quantum information processing and quantum networking [@Kimble2008a]. Single-photon sources based on cavity quantum electrodynamics (QED) [@Eisaman2011a; @Rempe2015a; @Kuhn2010a; @Law1997a; @Vasilev2010a; @Maurer2004a; @Barros2009a; @Kuhn1999a; @Duan2003a] are particularly promising, because they enable deterministic emission into a single mode, which is desirable for low-loss and scalable implementations. Many single-photon generation schemes have been proposed and studied using various cavity-QED effects, such as the Purcell effect [@Eisaman2011a; @Rempe2015a; @Kuhn2010a], on-resonant [@Kuhn2010a; @Law1997a; @Vasilev2010a] or off-resonant [@Maurer2004a; @Barros2009a] cavity-enhanced Raman scattering, and vacuum-stimulated Raman adiabatic passage (vSTIRAP) [@Eisaman2011a; @Rempe2015a; @Kuhn2010a; @Vasilev2010a; @Kuhn1999a; @Duan2003a; @Maurer2004a].
The overall efficiency of single-photon generation based on cavity QED is composed of two factors: the internal generation efficiency $\eta_{\mathrm{in}}$ (probability that a photon is generated inside the cavity) and the escape efficiency $\eta_{\mathrm{esc}}$ (probability that a generated photon is extracted to a desired external mode). The upper bounds on $\eta_{\mathrm{in}}$, based on the cooperativity parameter $C$ [@Rempe2015a], have been derived for some of the above schemes [@Rempe2015a; @Kuhn2010a; @Law1997a; @Vasilev2010a]. $C$ is inversely proportional to the total cavity loss rate, $\kappa=\kappa_{\mathrm{ex}}+\kappa_{\mathrm{in}}$, where $\kappa_{\mathrm{ex}}$ and $\kappa_{\mathrm{in}}$ are the external and internal loss rates, respectively [@comment-loss]. Note that $\kappa_{\mathrm{ex}}$ can be experimentally controlled by designing or tuning the transmissivity of the output coupler. Thus, $\eta_{\mathrm{in}}$ is maximized by setting $\kappa_{\mathrm{ex}}$ to a small value so that $\kappa \approx \kappa_{\mathrm{in}}$. However, a low $\kappa_{\mathrm{ex}}$ results in a low escape efficiency $\eta_{\mathrm{esc}}=\kappa_{\mathrm{ex}}/\kappa$, which limits the channelling of the generated photons into the desired mode. There is therefore a *tradeoff* relation between $\eta_{\mathrm{in}}$ and $\eta_{\mathrm{esc}}$ with respect to $\kappa_{\mathrm{ex}}$, and $\kappa_{\mathrm{ex}}$ should be optimized to maximize the overall efficiency. This tradeoff relation has not been examined in previous studies, where the internal loss rate $\kappa_{\mathrm{in}}$ has not been treated explicitly. Additionally, previous studies on the photon-generation efficiency have not taken account of a repumping process, where the atom decays to the initial ground state via spontaneous emission and is “reused" for cavity-photon generation [@Barros2009a].
In this paper, we analytically derive the upper bound on the overall efficiency of single-photon generation based on cavity QED, by taking into account both the cavity internal loss and the repumping process. We use the model shown in Fig. \[fig-system\], which is able to describe most of the previously proposed generation schemes, with or without the repumping process, in a unified and generalized manner.
In particular, we show that the lower bound on the failure probability for single-photon generation, $P_F$, for the case of no repumping, is given by [@comment-on-Goto; @Goto2008a; @Goto2010a] $$\begin{aligned}
P_F
\ge
\frac{2}{\displaystyle 1+\sqrt{1+2C_{\mathrm{in}}}}
\approx \sqrt{\frac{2}{C_{\mathrm{in}}}},
\label{eq-PF}\end{aligned}$$ where we have introduced the “internal cooperativity," $$\begin{aligned}
C_{\mathrm{in}}=
\frac{g^2}{2\kappa_{\mathrm{in}} \gamma },
\label{eq-Cin}\end{aligned}$$ as the cooperativity parameter with respect to $\kappa_{\mathrm{in}}$ instead of $\kappa$ for the standard definition, $C=g^2/(2\kappa \gamma )$ [@Rempe2015a]. The approximation in Eq. (\[eq-PF\]) holds when $C_{\mathrm{in}} \gg 1$.
The lower bound on $P_F$ in Eq. (\[eq-PF\]) is obtained when $\kappa_{\mathrm{ex}}$ is set to its optimal value, $$\begin{aligned}
\kappa_{\mathrm{ex}}^{\mathrm{opt}}
\equiv \kappa_{\mathrm{in}} \sqrt{1+2C_{\mathrm{in}}},
\label{eq-optimal-kex}\end{aligned}$$ and is simply expressed as $2\kappa_{\mathrm{in}}/\kappa^{\mathrm{opt}}$, where $\kappa^{\mathrm{opt}}
\equiv
\kappa_{\mathrm{in}}
+
\kappa_{\mathrm{ex}}^{\mathrm{opt}}$ [@comment-kex]. Note that the experimental values of $(g,\gamma,\kappa_{\mathrm{in}})$ determine which regime the system should be in: the Purcell regime ($\kappa \gg g \gg \gamma$), the strong-coupling regime ( $g \gg (\kappa, \gamma)$), or the intermediate regime ($\kappa \approx g \gg \gamma$).
The remainder of this paper is organized as follows. First, we show that the present model is applicable to various cavity-QED single-photon generation schemes. Next, we provide the basic equations for the present analysis. Using these equations, we analytically derive an upper bound on the success probability, $P_S=1-P_F$, of single-photon generation. From here, we optimize $\kappa_{\mathrm{ex}}$ and derive Ineq. (\[eq-PF\]). We then briefly discuss the condition for typical optical cavity-QED systems. Finally, the conclusion and outlook are presented.
*Model*. As shown in Fig. \[fig-system\], we consider a cavity QED system with a $\Lambda$-type three-level atom in a one-sided cavity. The atom is initially prepared in $|u\rangle$. The $|u\rangle$-$|e\rangle$ transition is driven with an external classical field, while the $|g\rangle$-$|e\rangle$ transition is coupled to the cavity. This system is general enough to describe most of the cavity QED single-photon generation schemes.
For instance, by first exciting the atom to $|e\rangle$ with a resonant $\pi$ pulse (with time-dependent $\Omega$), or fast adiabatic passage (with time-dependent $\Delta_u$), the atom is able to decay to $|g\rangle$ with a decay rate enhanced by the Purcell effect [@Purcell1946a], generating a single photon. Here, the Purcell regime is assumed. [@Rempe2015a; @Kuhn2010a; @Eisaman2011a].
Another example is where the atom is weakly excited with small $\Omega$ and a cavity photon is generated by cavity-enhanced Raman scattering. Here, $\kappa \gg g$ is assumed in the on-resonant case ($\Delta_e=\Delta_u=0$) [@Kuhn2010a; @Law1997a; @Vasilev2010a], while $\Delta_e \gg g$ is assumed in the off-resonant case ($\Delta_u=0$) [@Barros2009a; @Maurer2004a].
A third example is based on vSTIRAP [@Rempe2015a; @Eisaman2011a; @Kuhn2010a; @Vasilev2010a; @Kuhn1999a; @Duan2003a; @Maurer2004a],
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: 'We present a study of a peculiar nebula MF16 associated with an Ultraluminous X-ray Source NGC6946 ULX-1. We use integral-field and long-slit spectral data obtained with the 6-m telescope (Russia). The nebula was for a long time considered powered by strong shocks enhancing both high-excitation and low-excitation lines. However, kinematical properties point to rather moderate expansion rates ($V_S \sim 100\div 200$[$km\,s^{-1}\,$]{}). The total power of the emission-line source exceeds by one or two orders of magnitude the power observed expansion rate can provide, that points towards the existence of an additional source of excitation and ionization. Using CLOUDY96.01 photoionization code we derive the properties of the photoionizing source. Its total UV/EUV luminosity must be about $10^{40}$ erg/s.'
date: '??? and in revised form ???'
---
Introduction {#sec:intro}
============
Quite a large number of Ultraluminous X-ray Sources (ULXs) are associated with emission-line nebulae (ULX Nebulae, ULXNe), mostly large-scale bubbles powered by shock waves [@pamir (Pakull & Mirioni, 2003)]. However, several exceptions are known like the nebula associated with HoII X-1 [@lehmann (Lehmann , 2005)], that is clearly a photoionized [H [ii]{}]{} region. Another well-known example is the nebula MF16 coincident with the ULX NGC6946 ULX1.
The attention to MF16 was first drawn by [@BF_94], who identified the object as a Supernova Remnant (SNR), according to the emission-line spectrum with bright collisionally-excited lines. It was long considered an unusually luminous SNR, because of its huge optical emission-line ($L_{H\alpha} = 1.9\times10^{39}erg\,s^{-1}$, according to [@BF_94], for the tangential size $20\times34pc$) and X-ray ($L_X = 2.5\times10^{39}erg\,s^{-1}$ in the $0.5-8$keV range, according to the luminosities given by [@RoCo]).
However, it was shown by [@RoCo], that the spectral, spatial and timing properties of the X-ray source do not agree with the suggestion of a bright SNR, but rather suppose a point source with a typical “ULX-like” X-ray spectrum: cool Multicolor Disk (MCD) and a Power Law (PL) component. So, apart from the physical nature of the object, MF16 should be considered a [*ULX nebula*]{}, one of a new class of objects, described by [@pamir].
Optical Spectroscopy {#sec:obs}
====================
All the data were obtained on the SAO 6m telescope, Russia. Two spectrographs were used: panoramic MultiPupil Fiber Spectrograph MPFS [@MPFSdesc (Afanasiev , 2001)] and SCORPIO focal reducer [@scorpio (Afanasiev & Moiseev, 2005)] in long-slit mode. The details of data reduction processes and analysis technique will be presented in [@mf16_main]. Panoramic spectroscopy has the advantage of providing unbiased flux estimates. However, SCORPIO results have much higher signal-to-noise ratio and reveal rich emission-line spectrum of [\[Fe [iii]{}\]]{}. We also confirm the estimates of the total nebula emission-line luminosities by [@bfs]. $H\beta$ line luminosity obtained from our MPFS data is $L(H\beta) = (7.2\pm0.2)\times10^{37}erg\,s^{-1}$.
Using line ratios for the integral spectrum we estimate the mean parameters of emitting gas as: $n_e \simeq 500\pm 100 \,cm^{-3}$, $T_e \simeq (1.9\pm0.2) \times 10^4 K$. Interstellar absorption is estimated as $A_V \sim 1{^{\rm m}\!\!\!.\,}3$, close to the Galactic value ($A_V^{Gal} = 1{^{\rm m}\!\!\!.\,}14$, according to [@schlegel_abs])
We confirm the estimate of the expansion rate obtained by [@dunne], coming to the conclusion that the expansion velocity is $V_S \lesssim 200$[$km\,s^{-1}\,$]{}. In this case the total emission-line luminosity can be estimated using for example the equations be [@DoSutI]:
$$\begin{array}{l}
F_{H\beta} = 7.44 \times 10^{-6} \left( \frac{V_s}{100 km\, s^{-1}} \right)^{2.41}
\times \left( \frac{n_2}{cm^{-3}}\right)
+ \\
\qquad{}
9.86 \times 10^{-6} \left( \frac{V_s}{100 km \,s^{-1}} \right)^{2.28}
\times \left( \frac{n_1}{cm^{-3}}\right) \, erg\, cm^{-2} s^{-1}
\end{array}$$
Here $V_S$ is the shock velocity and $n_1$ the pre-shock hydrogen density. If the surface area is known, one can obtain the total luminosity in $H\beta$ from here. For $V_S = 200km/s$ and $n_1 = 1cm^{-3}$ it appears to be $L(H\beta) \simeq 1.6 \times 10^{36}$[ergs s$^{-1}$]{}, that is too low compared to the observed value. So we suggest an additional source of power providing most of the energy of the optical nebula.
Photoionization Modelling
=========================
We have computed a grid of CLOUDY96.01 [@cloudy98 (Ferland , 1998)] photoionization models in order to fit MF16 spectrum avoiding shock waves. We have fixed X-ray spectrum known from [*Chandra*]{} observations [@RoCo (Roberts & Colbert, 2003)], assuming all the plasma is situated at 10pc from the central point source, and introduced a blackbody source with the temperature changing from $10^3$ to $10^6$K and integral flux densities from 0.01 to 100 $erg\,cm^{-2}\,s^{-1}$.
The best fit parameters are $\lg T(K) = 5.15\pm 0.05, F = 0.6\pm 0.1 erg\,cm^{-2}\,s^{-1}$, that suggests quite a luminous ultraviolet source: $L_{UV} =
(7.5\pm0.5) \times 10^{39} erg\,s^{-1}$.The UV source is more than 100 times brighter then what can be predicted by extrapolating the thermal component of the best-fit model for X-ray data [@RoCo (Roberts & Colbert, 2003)].
Ultraluminous UV sources?
=========================
At least for one source we have indications that its X-ray spectrum extends in the EUV region. It is interesting to analyse the implications in the frameworks of two most popular hypotheses explaining the ULX phenomenon.
For the standard disk of [@ss73] the inner temperature scales as:
$$T_{in} \simeq 1~keV\, \left(\frac{M}{M_\odot}\right)^{-1/4} \left(\frac{\dot{M}}{\dot{M}_{cr}}\right)^{1/4}$$
In Fig. \[fig:seds\] we present the reconstructed Spectral Energy Distribution of NGC6946 ULX-1 including optical identification by [@bfs] and the best-fit blackbody from our model. For comparison, a set of MCD SEDs for IMBHs accreting at 1% of critical rate is shown. To explain the high EUV luminosity and roughly flat SED in the EUV region, a rather high IMBH mass is needed, $M \gtrsim 10^4 $[$M_\odot$]{}.
For supercritical disk this relation breaks [@poutanen (Poutanen , 2006)], and the outcoming radiation becomes much softer, except for the X-rays escaping along the disk axis [@superkarpov (Fabrika , 2007)]. Most part of the luminosity is supposed to be reprocessed into EUV and UV quanta, creating the nearly-flat SED of NGC6946 ULX1. In optical/UV range contribution of the donor star may become significant.
![NGC6946 ULX1 SED reconstruction. Optical source $d$ [@bfs (Blair , 2000)] is shown by an asterisk, and the upward arrow above indicates the unabsorbed optical luminosity: it is the lower estimate because only Galactic absorption was taken into account, $A_V =
1{^{\rm m}\!\!\!.\,}14$ according to [@schlegel_abs]. Dashed line represents the best-fit blackbody from our CLOUDY fitting. Thin solid lines are MCD models for accreting IMBHs with infinite outer disk radii. Mass accretion rate was set everywhere to $0.01 \dot{M}_{cr}$. []{data-label="fig:seds"}](abolmasov
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: |
Flexible and performant Persistency Service is a necessary component of any HEP Software Framework. The building of a modular, non-intrusive and performant persistency component have been shown to be very difficult task. In the past, it was very often necessary to sacrifice modularity to achieve acceptable performance. This resulted in the strong dependency of the overall Frameworks on their Persistency subsystems.
Recent development in software technology has made possible to build a Persistency Service which can be transparently used from other Frameworks. Such Service doesn’t force a strong architectural constraints on the overall Framework Architecture, while satisfying high performance requirements. Java Data Object standard (JDO) has been already implemented for almost all major databases. It provides truly transparent persistency for any Java object (both internal and external). Objects in other languages can be handled via transparent proxies. Being only a thin layer on top of a used database, JDO doesn’t introduce any significant performance degradation. Also Aspect-Oriented Programming (AOP) makes possible to treat persistency as an orthogonal Aspect of the Application Framework, without polluting it with persistence-specific concepts.
All these techniques have been developed primarily (or only) for the Java environment. It is, however, possible to interface them transparently to Frameworks built in other languages, like for example C++.
Fully functional prototypes of flexible and non-intrusive persistency modules have been build for several other packages, as for example FreeHEP AIDA and LCG Pool AttributeSet (package Indicium).
author:
- Julius Hřivnáč
title: Transparent Persistence with Java Data Objects
---
JDO
===
Requirements on Transparent Persistence
---------------------------------------
The Java Data Object (JDO) [@JDO1],[@JDO2],[@Standard],[@Portal] standard has been created to satisfy several requirements on the object persistence in Java:
- [**Object Model independence on persistency**]{}:
- Java types are automatically mapped to native storage types.
- 3rd party objects can be persistified (even when their source is not available).
- The source of the persistent class is the same as the source of the transient class. No additional code is needed to make a class persistent.
- All classes can be made persistent (if it has a sense).
- [**Illusion of in-memory access to data**]{}:
- Dirty instances (i.e. objects which have been changed after they have been read) are implicitly updated in the database.
- Catching, synchronization, retrieval and lazy loading are done automatically.
- All objects, referenced from a persistent object, are automatically persistent ([*Persistence by reachability*]{}).
- [**Portability across technologies**]{}:
- A wide range of storage technologies (relational databases, object-oriented databases, files,…) can be transparently used.
- All JDO implementations are exchangeable.
- [**Portability across platforms**]{} is automatically available in Java.
- [**No need for a different language**]{} (DDL, SQL,…) to handle persistency (incl. queries).
- [**Interoperability with Application Servers**]{} (EJB [@EJB],…).
Architecture of Java Data Objects
---------------------------------
The Java Data Objects standard (Java Community Process Open Standard JSR-12) [@Standard] has been created to satisfy the requirements listed in the previous paragraph.
{width="135mm"}
The persistence capability is added to a class by the Enhancer (as shown in Figure \[Enhancement\]):
- Enhancer makes a transient class PersistenceCapable by adding it all data and methods needed to provide the persistence functionality. After enhancement, the class implements PersistenceCapable interface (as shown in Figure \[PersistenceCapable\]).
- Enhancer is generally applied to a class-file, but it can be also part of a compiler or a loader.
- Enhancing effects can be modified via Persistence Descriptor (XML file).
- All enhancers are compatible. Classes enhanced with one JDO implementation will work automatically with all other implementations.
![Enhancer makes any class PersistenceCapable.[]{data-label="PersistenceCapable"}](PersistenceCapable.eps){width="80mm"}
The main object, a user interacts with, is the PersistenceManager. It mediates all interactions with the database, it manages instances lifecycle and it serves as a factory for Transactions, Queries and Extents (as described in Figure \[PersistenceManager\]).
![All interactions with JDO are mediated by PersistenceManager.[]{data-label="PersistenceManager"}](PersistenceManager.eps){width="80mm"}
Available Implementations
-------------------------
After about a year since the JDO standardization, there are already many implementations available supporting all existing storage technologies.
JDO Implementations
-------------------
### Commercial JDO Implementations
Following commercial implementations of JDO standard exist:
enJin(Versant), FastObjects(Poet), FrontierSuit(ObjectFrontier), IntelliBO (Signsoft), JDOGenie(Hemisphere), JRelay(Object Industries), KODO(SolarMetric), LiDO(LIBeLIS), OpenFusion(Prism), Orient(Orient), PE:J(HYWY), …
These implementation often have a free community license available.
### Open JDO Implementations
There are already several open JDO implementations available:
- [**JDORI**]{} [@JDORI] (Sun) is the reference and standard implementation. It currently only works with the FOStore files. Support for a relational database via JDBC implementation is under development. It is the most standard, but not the most performant implementation.
- [**TJDO**]{} [@TJDO] (SourceForge) is a high quality implementation originally written by the TreeActive company, later put on the GPL license. It supports all important relational databases. It supports an automatic creation of the database schema. It implements full JDO standard.
- [**XORM**]{} [@XORM] (SourceForge) does not yet support full JDO standard. It does not automatically generate a database schema, on the other hand, it allows a reuse of existing schemas.
- [**JORM**]{} [@JORM] (JOnAS/ObjectWeb) has a fully functional object-relational mapping, the full JDO implementation is under development.
- [**OJB**]{} [@OJB] (Apache) has a mature object-relational engine. Full JDO interface is not yet provided.
Supported Databases
-------------------
All widely used databases are already supported either by their provider or by a third party:
- [**RDBS and ODBS**]{}: Oracle, MS SQL Server, DB2, PointBase, Cloudscape, MS Access, JDBC/ODBC Bridge, Sybase, Interbase, InstantDB, Informix, SAPDB, Postgress, MySQL, Hypersonic SQL, Versant,…
- [**Files**]{}: XML, FOSTORE, flat, C-ISAM,…
The performance of JDO implementations is determined by the native performance of a database. JDO itself introduces a very small overhead.
HEP Applications using JDO
==========================
Trivial Application
-------------------
A simple application using JDO to write and read data is shown in Listing \[Trivial\].
[|l|]{} $//\ Initialization$\
$PersistenceManagerFactory\ pmf = JDOHelper.getPersistenceManagerFactory(properties);$\
$PersistenceManager\ pm = pmf.getPersistenceManager();$\
$Transaction\ tx = pm.currentTransaction();$\
\
$//\ Writing$\
$tx.begin();$\
$\dots$\
$Event\ event = \dots;$\
$pm.makePersistent(event);$\
$\dots$\
$tx.commit();$\
\
$//\ Searching\ using\ Java-like\ query\ language\ translated\ internally\ to\ DB\ native\ query\ language$\
$//\ (SQL\ available\ too\ for\ RDBS)$\
$tx.begin();$\
$Extent\ extent = pm.getExtent(Track.class, true);$\
$String\ filter = "pt > 20.0";$\
$Query\ query = pm.newQuery(extent, filter);$\
$Collection\ results = query.execute();$\
$\dots$\
$tx.commit();$\
Indicium
--------
Indicium [@Indicium] has been created to satisfy the LCG [@LCG] Pool [@Pool] requirements on the Metadata management: “To define, accumulate, search, filter and manage Attributes (Metadata) external/additional to existing (Event) data.” Those metadata are a generalization of the traditional Paw ntuple concept. They are used in the first phase of the analysis process to make a pre-selection of Event for further processing. They should be efficient. They are apparently closely related to Collections (of Events).
The Indicium package
|
{
"pile_set_name": "ArXiv"
}
|
Preprint hep-ph/0006089
[Improved Conformal Mapping of the Borel Plane]{}
U. D. Jentschura and G. Soff
[*Institut für Theoretische Physik, TU Dresden, 01062 Dresden, Germany*]{}\
[**Email:**]{} jentschura@physik.tu-dresden.de, soff@physik.tu-dresden.de
The conformal mapping of the Borel plane can be utilized for the analytic continuation of the Borel transform to the entire positive real semi-axis and is thus helpful in the resummation of divergent perturbation series in quantum field theory. We observe that the convergence can be accelerated by the application of Padé approximants to the Borel transform expressed as a function of the conformal variable, i.e. by a combination of the analytic continuation via conformal mapping and a subsequent numerical approximation by rational approximants. The method is primarily useful in those cases where the leading (but not sub-leading) large-order asymptotics of the perturbative coefficients are known.
11.15.Bt, 11.10.Jj General properties of perturbation theory;\
Asymptotic problems and properties
The problem of the resummation of quantum field theoretic series is of obvious importance in view of the divergent, asymptotic character of the perturbative expansions [@LGZJ1990; @ZJ1996; @Fi1997]. The convergence can be accelerated when additional information is available about large-order asymptotics of the perturbative coefficients [@JeWeSo2000]. In the example cases discussed in [@JeWeSo2000], the location of several poles in the Borel plane, known from the leading and next-to-leading large-order asymptotics of the perturbative coefficients, is utilized in order to construct specialized resummation prescriptions. Here, we consider a particular perturbation series, investigated in [@BrKr1999], where only the [*leading*]{} large-order asymptotics of the perturbative coefficients are known to sufficient accuracy, and the subleading asymptotics have – not yet – been determined. Therefore, the location of only a single pole – the one closest to the origin – in the Borel plane is available. In this case, as discussed in [@CaFi1999; @CaFi2000], the (asymptotically optimal) conformal mapping of the Borel plane is an attractive method for the analytic continuation of the Borel transform beyond its circle of convergence and, to a certain extent, for accelerating the convergence of the Borel transforms. Here, we argue that the convergence of the transformation can be accelerated further when the Borel transforms, expressed as a function of the conformal variable which mediates the analytic continuation, are additionally convergence-accelerated by the application of Padé approximants.
First we discuss, in general terms, the construction of the improved conformal mapping of the Borel plane which is used for the resummation of the perturbation series defined in Eqs. (\[gammaPhi4\]) and (\[gammaYukawa\]) below. The method uses as input data the numerical values of a finite number of perturbative coefficients and the leading large-order asymptotics of the perturbative coefficients, which can, under appropriate circumstances, be derived from an empirical investigation of a finite number of coefficients, as it has been done in [@BrKr1999]. We start from an asymptotic, divergent perturbative expansion of a physical observable $f(g)$ in powers of a coupling parameter $g$, $$\label{power}
f(g) \sim \sum_{n=0}^{\infty} c_n\,g^n\,,$$ and we consider the generalized Borel transform of the $(1,\lambda)$-type (see Eq. (4) in [@JeWeSo2000]), $$\label{BorelTrans}
f^{(\lambda)}_{\rm B}(u) \; \equiv \;
f^{(1,\lambda)}_{\rm B}(u) \; = \;
\sum_{n=0}^{\infty} \frac{c_n}{\Gamma(n+\lambda)}\,u^n\,.$$ The full physical solution can be reconstructed from the divergent series (\[power\]) by evaluating the Laplace-Borel integral, which is defined as $$\label{BorelIntegral}
f(g) = \frac{1}{g^\lambda} \,
\int_0^\infty {\rm d}u \,u^{\lambda - 1} \,
\exp\bigl(-u/g\bigr)\,
f^{(\lambda)}_{\rm B}(u)\,.$$ The integration variable $u$ is referred to as the Borel variable. The integration is carried out either along the real axis or infinitesimally above or below it (if Padé approximants are used for the analytic continuation, modified integration contours have been proposed [@Je2000]). The most prominent issue in the theory of the Borel resummation is the construction of an analytic continuation for the Borel transform (\[BorelTrans\]) from a finite-order partial sum of the perturbation series (\[power\]), which we denote by $$\label{PartialSum}
f^{(\lambda),m}_{\rm B}(u) =
\sum_{n=0}^{m} \frac{c_n}{\Gamma(n+\lambda)}\,u^n\,.$$ The analytic continuation can be accomplished using the direct application of Padé approximants to the partial sums of the Borel transform $f^{(\lambda),m}_{\rm B}(u)$ [@BrKr1999; @Je2000; @Raczka1991; @Pi1999] or by a conformal mapping [@SeZJ1979; @LGZJ1983; @GuKoSu1995; @CaFi1999; @CaFi2000]. We now assume that the [*leading*]{} large-order asymptotics of the perturbative coefficients $c_n$ defined in Eq. (\[power\]) is factorial, and that the coefficients display an alternating sign pattern. This indicates the existence of a singularity (branch point) along the negative real axis corresponding to the leading large-order growth of the perturbative coefficients, which we assume to be at $u=-1$. For Borel transforms which have only a single cut in the complex plane which extends from $u=-1$ to $u=-\infty$, the following conformal mapping has been recommended as optimal [@CaFi1999], $$\label{DefZ}
z = z(u) = \frac{\sqrt{1+u}-1}{\sqrt{1+u}+1}\,.$$ Here, $z$ is referred to as the conformal variable. The cut Borel plane is mapped unto the unit circle by the conformal mapping (\[DefZ\]). We briefly mention that a large variety of similar conformal mappings have been discussed in the literature .
It is worth noting that conformal mappings which are adopted for doubly-cut Borel planes have been discussed in [@CaFi1999; @CaFi2000]. We do not claim here that it would be impossible to construct conformal mappings which reflect the position of more than two renormalon poles or branch points in the complex plane. However, we stress that such a conformal mapping is likely to have a more complicated mathematical structure than, for example, the mapping defined in Eq. (27) in [@CaFi1999]. Using the alternative methods described in [@JeWeSo2000], poles (branch points) in the Borel plane corresponding to the subleading asymptotics can be incorporated easily provided their position in the Borel plane is known. In a concrete example (see Table 1 in [@JeWeSo2000]), 14 poles in the Borel plane have been fixed in the denominator of the Padé approximant constructed according to Eqs. (53)–(55) in [@JeWeSo2000], and accelerated convergence of the transforms is observed. In contrast to the investigation [@JeWeSo2000], we assume here that only the [*leading*]{} large-order factorial asymptotics of the perturbative coefficients are known.
We continue with the discussion of the conformal mapping (\[DefZ\]). It should be noted that for series whose leading singularity in the Borel plane is at $u = -u_0$ with $u_0 > 0$, an appropriate rescaling of the Borel variable $u \to |u_0|\, u$ is necessary on the right-hand side of Eq. (\[BorelIntegral\]). Then, $f^{(\lambda)}_{\rm B}(|u_0|\,u)$ as a function of $u$ has its leading singularity at $u = -1$ (see also Eq. (41.57) in [@ZJ1996]). The Borel integration variable $u$ can be expressed as a function of $z$ as follows, $$\label{UasFuncOfZ}
u(z) = \frac{4 \, z}{(z-1)^2}\,.$$ The $m$th partial sum of the Borel transform (\[PartialSum\]) can be rewritten, upon expansion of the $u$ in powers of $z$, as $$\label{PartialSumConformal}
f^{(\lambda),m}_{\rm B}(u) =
f^{(\lambda),m}_{\rm B}\bigl(u(z)\bigr) =
\sum_{n=0}^{m} C_n\,z^n + {\cal O}(z^{m+1})\,,$$ where the coefficients $C_n$ as a function of the $c_n$ are uniquely determined (see, e.g., Eqs. (36) and (37) of [@CaFi1999]). We define partial sum of the Borel transform, expressed as a function of the conformal variable $z$, as $$f'^{(\lambda),m}_{\rm B}(z) = \sum_{n=0}^{m} C_n\,z^n\,.$$ In a previous investigation [@CaFi1999], Cap
|
{
"pile_set_name": "ArXiv"
}
|
\[section\] \[theorem\][Lemma]{} \[theorem\][Proposition]{} \[theorem\][Corollary]{} \[theorem\][Remark]{} \[theorem\][Fact]{} \[theorem\][Problem]{}
@addtoreset
¶[[**P**]{}]{}
**A subdiffusive behaviour of recurrent random walk**
**in random environment on a regular tree**
by
Yueyun Hu $\;$and$\;$ Zhan Shi
*Université Paris XIII & Université Paris VI*
This version: March 11, 2006
=2truecm =2truecm
[***Summary.***]{} We are interested in the random walk in random environment on an infinite tree. Lyons and Pemantle [@lyons-pemantle] give a precise recurrence/transience criterion. Our paper focuses on the almost sure asymptotic behaviours of a recurrent random walk $(X_n)$ in random environment on a regular tree, which is closely related to Mandelbrot [@mandelbrot]’s multiplicative cascade. We prove, under some general assumptions upon the distribution of the environment, the existence of a new exponent $\nu\in (0, {1\over 2}]$ such that $\max_{0\le i \le n} |X_i|$ behaves asymptotically like $n^{\nu}$. The value of $\nu$ is explicitly formulated in terms of the distribution of the environment.
[***Keywords.***]{} Random walk, random environment, tree, Mandelbrot’s multiplicative cascade.
[***2000 Mathematics Subject Classification.***]{} 60K37, 60G50.
Introduction {#s:intro}
============
Random walk in random environment (RWRE) is a fundamental object in the study of random phenomena in random media. RWRE on $\z$ exhibits rich regimes in the transient case (Kesten, Kozlov and Spitzer [@kesten-kozlov-spitzer]), as well as a slow logarithmic movement in the recurrent case (Sinai [@sinai]). On $\z^d$ (for $d\ge 2$), the study of RWRE remains a big challenge to mathematicians (Sznitman [@sznitman], Zeitouni [@zeitouni]). The present paper focuses on RWRE on a regular rooted tree, which can be viewed as an infinite-dimensional RWRE. Our main result reveals a rich regime à la Kesten–Kozlov–Spitzer, but this time even in the recurrent case; it also strongly suggests the existence of a slow logarithmic regime à la Sinai.
Let $\T$ be a $\deg$-ary tree ($\deg\ge 2$) rooted at $e$. For any vertex $x\in \T \backslash \{ e\}$, let ${\buildrel \leftarrow \over x}$ denote the first vertex on the shortest path from $x$ to the root $e$, and $|x|$ the number of edges on this path (notation: $|e|:= 0$). Thus, each vertex $x\in \T \backslash \{ e\}$ has one parent ${\buildrel \leftarrow \over x}$ and $\deg$ children, whereas the root $e$ has $\deg$ children but no parent. We also write ${\buildrel \Leftarrow \over x}$ for the parent of ${\buildrel \leftarrow \over x}$ (for $x\in \T$ such that $|x|\ge 2$).
Let $\omega:= (\omega(x,y), \, x,y\in \T)$ be a family of non-negative random variables such that $\sum_{y\in \T} \omega(x,y)=1$ for any $x\in \T$. Given a realization of $\omega$, we define a Markov chain $X:= (X_n, \, n\ge 0)$ on $\T$ by $X_0 =e$, and whose transition probabilities are $$P_\omega(X_{n+1}= y \, | \, X_n =x) = \omega(x, y) .$$
Let $\P$ denote the distribution of $\omega$, and let $\p (\cdot) := \int P_\omega (\cdot) \P(\! \d \omega)$. The process $X$ is a $\T$-valued RWRE. (By informally taking $\deg=1$, $X$ would become a usual RWRE on the half-line $\z_+$.)
For general properties of tree-valued processes, we refer to Peres [@peres] and Lyons and Peres [@lyons-peres]. See also Duquesne and Le Gall [@duquesne-le-gall] and Le Gall [@le-gall] for continuous random trees. For a list of motivations to study RWRE on a tree, see Pemantle and Peres [@pemantle-peres1], p. 106.
We define $$A(x) := {\omega({\buildrel \leftarrow \over x},
x) \over \omega({\buildrel \leftarrow \over x},
{\buildrel \Leftarrow \over x})} , \qquad
x\in \T, \; |x|\ge 2.
\label{A}$$
Following Lyons and Pemantle [@lyons-pemantle], we assume throughout the paper that $(\omega(x,\bullet))_{x\in \T\backslash \{ e\} }$ is a family of i.i.d. [*non-degenerate*]{} random vectors and that $(A(x), \; x\in \T, \; |x|\ge 2)$ are identically distributed. We also assume the existence of $\varepsilon_0>0$ such that $\omega(x,y) \ge \varepsilon_0$ if either $x= {\buildrel \leftarrow \over y}$ or $y= {\buildrel \leftarrow \over x}$, and $\omega(x,y) =0$ otherwise; in words, $(X_n)$ is a nearest-neighbour walk, satisfying an ellipticity condition.
Let $A$ denote a generic random variable having the common distribution of $A(x)$ (for $|x| \ge 2$). Define $$p := \inf_{t\in [0,1]} \E (A^t) .
\label{p}$$
We recall a recurrence/transience criterion from Lyons and Pemantle ([@lyons-pemantle], Theorem 1 and Proposition 2).
[**Theorem A (Lyons and Pemantle [@lyons-pemantle])**]{} [*With $\p$-probability one, the walk $(X_n)$ is recurrent or transient, according to whether $p\le {1\over \deg}$ or $p>{1\over \deg}$. It is, moreover, positive recurrent if $p<{1\over \deg}$.*]{}
We study the recurrent case $p\le {1\over \deg}$ in this paper. Our first result, which is not deep, concerns the positive recurrent case $p< {1\over \deg}$.
\[t:posrec\] If $p<{1\over \deg}$, then $$\lim_{n\to \infty} \, {1\over \log n} \,
\max_{0\le i\le n} |X_i| =
{1\over \log[1/(q\deg)]},
\qquad \hbox{\rm $\p$-a.s.},
\label{posrec}$$ where the constant $q$ is defined in $(\ref{q})$, and lies in $(0, {1\over \deg})$ when $p<{1\over
\deg}$.
Despite the warning of Pemantle [@pemantle] (“there are many papers proving results on trees as a somewhat unmotivated alternative …to Euclidean space"), it seems to be of particular interest to study the more delicate situation $p={1\over \deg}$ that turns out to possess rich regimes. We prove that, similarly to the Kesten–Kozlov–Spitzer theorem for [*transient*]{} RWRE on the line, $(X_n)$ enjoys, even in the recurrent case, an interesting subdiffusive behaviour.
To state our main result, we define $$\begin{aligned}
\kappa
&:=& \inf\left\{ t>1: \; \E(A^t) = {1\over \deg}
\right\} \in (1, \infty], \qquad (\inf
\emptyset=\infty)
\label{kappa}
\\
\psi(t)
&:=& \log \E \left( A^t \right) , \qquad t\ge 0.
\label{psi}\end{aligned}$$
We use the notation $a_n \approx b_n$ to denote $\lim_{n\to \infty} \, {\log a_n \over \log b_n} =1$.
\[t:nullrec\] If $p={1\over \deg}$ and if $\psi'(1)<0$, then $$\max_{0\le i\le n} |X_i| \; \approx\; n^\nu,
\qquad \hbox{\rm $\p$-a.s.},
\label{nullrec}$$ where $\nu=\nu(\kappa)$ is defined by $$\nu := 1-
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: 'Feature selection (FS) is a key preprocessing step in data mining. CFS (Correlation-Based Feature Selection) is an FS algorithm that has been successfully applied to classification problems in many domains. We describe Distributed CFS (DiCFS) as a completely redesigned, scalable, parallel and distributed version of the CFS algorithm, capable of dealing with the large volumes of data typical of big data applications. Two versions of the algorithm were implemented and compared using the Apache Spark cluster computing model, currently gaining popularity due to its much faster processing times than Hadoop’s MapReduce model. We tested our algorithms on four publicly available datasets, each consisting of a large number of instances and two also consisting of a large number of features. The results show that our algorithms were superior in terms of both time-efficiency and scalability. In leveraging a computer cluster, they were able to handle larger datasets than the non-distributed WEKA version while maintaining the quality of the results, i.e., exactly the same features were returned by our algorithms when compared to the original algorithm available in WEKA.'
address:
- |
Systems Engineering Department,\
National Autonomous University of Honduras. Blvd. Suyapa, Tegucigalpa, Honduras
- |
Department of Computer Science, University of Alcalá\
Alcalá de Henares, 28871 Madrid, Spain
- |
Department of Computer Science, University of A Coruña\
Campus de Elviña s/n 15071 - A Coruña, Spain
author:
- 'Raul-Jose Palma-Mendoza'
- 'Luis de-Marcos'
- Daniel Rodriguez
- 'Amparo Alonso-Betanzos'
title: 'Distributed Correlation-Based Feature Selection in Spark'
---
feature selection ,scalability ,big data ,apache spark ,cfs ,correlation
Introduction {#sec:intro}
============
In recent years, the advent of big data has raised unprecedented challenges for all types of organizations and researchers in many fields. Xindong et al. [@XindongWu2014], however, state that the big data revolution has come to us not only with many challenges but also with plenty of opportunities for those organizations and researchers willing to embrace them. Data mining is one field where the opportunities offered by big data can be embraced, and, as indicated by Leskovec et al. [@Leskovec2014mining], the main challenge is to extract useful information or knowledge from these huge data volumes that enable us to predict or better understand the phenomena involved in the generation of the data.
Feature selection (FS) is a dimensionality reduction technique that has emerged as an important step in data mining. According to Guyon and Eliseeff [@Guyon2003] its purpose is twofold: to select relevant attributes and simultaneously to discard redundant attributes. This purpose has become even more important nowadays, as vast quantities of data need to be processed in all kinds of disciplines. Practitioners also face the challenge of not having enough computational resources. In a review of the most widely used FS methods, Bolón-Canedo et al. [@Bolon-Canedo2015b] conclude that there is a growing need for scalable and efficient FS methods, given that the existing methods are likely to prove inadequate for handling the increasing number of features encountered in big data.
Depending on their relationship with the classification process, FS methods are commonly classified in one of three main categories : (i) filter methods, (ii) wrapper methods, or (iii) embedded methods. *Filters* rely solely on the characteristics of the data and, since they are independent of any learning scheme, they require less computational effort. They have been shown to be important preprocessing techniques, with many applications such as churn prediction [@Idris2012; @Idris2013] and microarray data classification. In microarray data classification, filters obtain better or at least comparable results in terms of accuracy to wrappers [@Bolon-Canedo2015a]. In *wrapper* methods, the final subset selection is based on a learning algorithm that is repeatedly trained with the data. Although wrappers tend to increase the final accuracy of the learning scheme, they are usually more computationally expensive than the other two approaches. Finally, in *embedded* methods, FS is part of the classification process, e.g., as happens with decision trees.
Another important classification of FS methods is, according to their results, as (i) ranker algorithms or (ii) subset selector algorithms. With *rankers*, the result is a sorted set of the original features. The order of this returned set is defined according to the quality that the FS method determines for each feature. Some rankers also assign a weight to each feature that provides more information about its quality. *Subset selectors* return a non-ordered subset of features from the original set so that together they yield the highest possible quality according to some given measure. Subset selectors, therefore, consist of a search procedure and an evaluation measure. This can be considered an advantage in many cases, as rankers usually evaluate features individually and leave it to the user to select the number of top features in a ranking.
One filter-based subset selector method is the Correlation-Based Feature Selection (CFS) algorithm [@Hall2000], traditionally considered useful due to its ability not only to reduce dimensionality but also to improve classification algorithm performance. However, the CFS algorithm, like many other multivariate FS algorithms, has a time execution complexity $\mathcal{O}(m^2 \cdot n)$, where $m$ is the number of features and $n$ is the number of instances. This quadratic complexity in the number of features makes CFS very sensitive to the *the curse of dimensionality* [@bellman1957dynamic]. Therefore, a scalable adaptation of the original algorithm is required to be able to apply the CFS algorithm to datasets that are large both in number of instances and dimensions.
As a response to the big data phenomenon, many technologies and programming frameworks have appeared with the aim of helping data mining practitioners design new strategies and algorithms that can tackle the challenge of distributing work over clusters of computers. One such tool that has recently received much attention is Apache Spark [@Zaharia2010], which represents a new programming model that is a superset of the MapReduce model introduced by Google [@Dean2004a; @Dean2008]. One of Spark’s strongest advantages over the traditional MapReduce model is its ability to efficiently handle the iterative algorithms that frequently appear in the data mining and machine learning fields.
We describe two distributed and parallel versions of the original CFS algorithm for classification problems using the Apache Spark programming model. The main difference between them is how the data is distributed across the cluster, i.e., using a horizontal partitioning scheme (hp) or using a vertical partitioning scheme (vp). We compare the two versions – DiCFS-hp and DiCFS-vp, respectively – and also compare them with a baseline, represented by the classical non-distributed implementation of CFS in WEKA [@Hall2009a]. Finally, their benefits in terms of reduced execution time are compared with those of the CFS version developed by Eiras-Fanco et al. [@Eiras-Franco2016] for regression problems. The results show that the time-efficiency and scalability of our two versions are an improvement on those of the original version of the CFS; furthermore, similar or improved execution times are obtained with respect to the Eiras-Franco et al [@Eiras-Franco2016] regression version. In the interest of reproducibility, our software and sources are available as a Spark package[^1] called DiCFS, with a corresponding mirror in Github.[^2]
The rest of this paper is organized as follows. Section \[sec:stateofart\] summarizes the most important contributions in the area of distributed and parallel FS and proposes a classification according to how parallelization is carried out. Section \[sec:cFS\] describes the original CFS algorithm, including its theoretical foundations. Section \[sec:spark\] presents the main aspects of the Apache Spark computing framework, focusing on those relevant to the design and implementation of our proposed algorithms. Section \[sec:diCFS\] describes and discusses our DiCFS-hp and DiCFS-vp versions of the CFS algorithm. Section \[sec:experiments\] describes our experiments to compare results for DiCFS-hp and DiCFS-vp, the WEKA approach and the Eiras-Fanco et al. [@Eiras-Franco2016] approach. Finally, conclusions and future work are outlined in Section \[sec:conclusions\].
Background and Related Work {#sec:stateofart}
===========================
As might be expected, filter-based FS algorithms have asymptotic complexities that depend on the number of features and/or instances in a dataset. Many algorithms, such as the CFS, have quadratic complexities, while the most frequently used algorithms have at least linear complexities [@Bolon-Canedo2015b]. This is why, in recent years, many attempts have been made to achieve more scalable FS methods. In what follows, we analyse recent work on the design of new scalable FS methods according to parallelization approaches: (i) search-oriented, (ii) dataset-split-oriented, or (iii) filter-oriented.
*Search-oriented* parallelizations account for most approaches, in that the main aspects to be parallelized are (i) the search guided by a classifier and (ii) the corresponding evaluation of the resulting models. We classify the following studies in this category:
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: |
The aim of this paper is to numerically solve a diffusion differential problem having time derivative of fractional order. To this end we propose a collocation-Galerkin method that uses the fractional splines as approximating functions. The main advantage is in that the derivatives of integer and fractional order of the fractional splines can be expressed in a closed form that involves just the generalized finite difference operator. This allows us to construct an accurate and efficient numerical method. Several numerical tests showing the effectiveness of the proposed method are presented.\
[**Keywords**]{}: Fractional diffusion problem, Collocation method, Galerkin method, Fractional spline
author:
- 'Laura Pezza[^1], Francesca Pitolli[^2]'
title: 'A fractional spline collocation-Galerkin method for the time-fractional diffusion equation'
---
Introduction. {#sec:intro}
=============
The use of fractional calculus to describe real-world phenomena is becoming increasingly widespread. Integro-differential equations of [*fractional*]{}, [*i.e.*]{} positive real, order are used, for instance, to model wave propagation in porous materials, diffusive phenomena in biological tissue, viscoelastic properties of continuous media [@Hi00; @Ma10; @KST06; @Ta10]. Among the various fields in which fractional models are successfully used, viscoelasticity is one of the more interesting since the memory effect introduced by the time-fractional derivative allows to model anomalous diffusion phenomena in materials that have mechanical properties in between pure elasticity and pure viscosity [@Ma10]. Even if these models are empirical, nevertheless they are shown to be consistent with experimental data.\
The increased interest in fractional models has led to the development of several numerical methods to solve fractional integro-differential equations. Many of the proposed methods generalize to the fractional case numerical methods commonly used for the classical integer case (see, for instance, [@Ba12; @PD14; @ZK14] and references therein). But the nonlocality of the fractional derivative raises the challenge of obtaining numerical solution with high accuracy at a low computational cost. In [@PP16] we proposed a collocation method especially designed for solving differential equations of fractional order in time. The key ingredient of the method is the use of the fractional splines introduced in [@UB00] as approximating functions. Thus, the method takes advantage of the explicit differentiation rule for fractional B-splines that allows us to evaluate accurately the derivatives of both integer and fractional order.\
In the present paper we used the method to solve a diffusion problem having time derivative of fractional order and show that the method is efficient and accurate. More precisely, the [*fractional spline collocation-Galerkin method*]{} here proposed combines the fractional spline collocation method introduced in [@PP16] for the time discretization and a classical spline Galerkin method in space.\
The paper is organized as follows. In Section \[sec:diffeq\], a time-fractional diffusion problem is presented and the definition of fractional derivative is given. Section \[sec:fractBspline\] is devoted to the fractional B-splines and the explicit expression of their fractional derivative is given. The fractional spline approximating space is described in Section \[sec:app\_spaces\], while the fractional spline collocation-Galerkin method is introduced in Section \[sec:Galerkin\]. Finally, in Section \[sec:numtest\] some numerical tests showing the performance of the method are displayed. Some conclusions are drawn in Section \[sec:concl\].
A time-fractional diffusion problem. {#sec:diffeq}
====================================
We consider the [*time-fractional differential diffusion problem*]{} [@Ma10] $$\label{eq:fracdiffeq}
\left \{ \begin{array}{lcc}
\displaystyle D_t^\gamma \, u(t, x) - \frac{\partial^2}{\partial x^2} \, u(t, x) = f(t, x)\,, & \quad t \in [0, T]\,, & \quad x \in [0,1] \,,\\ \\
u(0, x) = 0\,, & & \quad x \in [0,1]\,, \\ \\
u(t, 0) = u(t, 1) = 0\,, & \quad t \in [0, T]\,,
\end{array} \right.$$ where $ D_t^\gamma u$, $0 < \gamma < 1$, denotes the [*partial fractional derivative*]{} with respect to the time $t$. Usually, in viscoelasticity the fractional derivative is to be understood in the Caputo sense, [*i.e.*]{} $$\label{eq:Capfrac}
D_t^\gamma \, u(t, x) = \frac1{\Gamma(1-\gamma)} \, \int_0^t \, \frac{u_t(\tau,x)}{(t - \tau)^\gamma} \, d\tau\,, \qquad t\ge 0\,,$$ where $\Gamma$ is the Euler’s gamma function $$\Gamma(\gamma+1)= \int_0^\infty \, s^\gamma \, {\rm e}^{-s} \, ds\,.$$ We notice that due to the homogeneous initial condition for the function $u(t,x)$, solution of the differential problem (\[eq:fracdiffeq\]), the Caputo definition (\[eq:Capfrac\]) coincides with the Riemann-Liouville definition (see [@Po99] for details). One of the advantage of the Riemann-Liouville definition is in that the usual differentiation operator in the Fourier domain can be easily extended to the fractional case, [*i.e.*]{} $${\cal F} \bigl(D_t^\gamma \, f(t) \bigr) = (i\omega)^\gamma {\cal F} (f(t))\,,$$ where ${\cal F}(f)$ denotes the Fourier transform of the function $f(t)$. Thus, analytical Fourier methods usually used in the classical integer case can be extended to the fractional case [@Ma10].
The fractional B-splines and their fractional derivatives. {#sec:fractBspline}
==========================================================
The [*fractional B-splines*]{}, [*i.e.*]{} the B-splines of fractional degree, were introduced in [@UB00] generalizing to the fractional power the classical definition for the polynomial B-splines of integer degree. Thus, the fractional B-spline $B_{\alpha}$ of degree $\alpha$ is defined as $$\label{eq:Balpha}
B_{\alpha}(t) := \frac{{ \Delta}^{\alpha+1} \, t_+^\alpha} {\Gamma(\alpha+1)}\,, \qquad \alpha > -\frac 12\,,$$ where $$\label{eq:fracttruncpow}
t_+^\alpha: = \left \{ \begin{array}{ll}
t^\alpha\,, & \qquad t \ge 0\,, \\ \\
0\,, & \qquad \hbox{otherwise}\,,
\end{array} \right. \qquad \alpha > -1/2\,,$$ is the [*fractional truncated power function*]{}. $\Delta^{\alpha}$ is the [*generalized finite difference operator*]{} $$\label{eq:fracfinitediff}
\Delta^{\alpha} \, f(t) := \sum_{k\in \NN} \, (-1)^k \, {\alpha \choose k} \, f(t-\,k)\,,
\qquad \alpha \in \RR^+\,,$$ where $$\label{eq:binomfrac}
{\alpha \choose k} := \frac{\Gamma(\alpha+1)}{k!\, \Gamma(\alpha-k+1)}\,, \qquad k\in \NN\,, \quad \alpha \in \RR^+\,,$$ are the [*generalized binomial coefficients*]{}. We notice that ’fractional’ actually means ’noninteger’, [*i.e.*]{} $\alpha$ can assume any real value greater than $-1/2$. For real values of $\alpha$, $B_\alpha$ does not have compact support even if it belongs to $L_2(\RR)$. When $\alpha=n$ is a nonnegative integer, Equations (\[eq:Balpha\])-(\[eq:binomfrac\]) are still valid; $\Delta^{n}$ is the usual finite difference operator so that $B_n$ is the classical polynomial B-spline of degree $n$ and compact support $[0,n+1]$ (for details on polynomial B-splines see, for instance, the monograph [@Sc07]).
The fractional B-splines for different values of the parameter $\alpha$ are displayed in Figure \[fig:fractBsplines\] (top left panel). The classical polynomial B-splines are also displayed (dashed lines). The picture shows that the fractional B-splines decay very fast toward infinity so that they can be assumed compactly supported for computational purposes. Moreover, in contrast to the polynomial B-splines, fractional splines are not always positive even if the nonnegative part becomes more and more smaller as $\alpha$ increases.
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
![Top left panel: The fractional B-splines (solid lines) and the polynomial B-splines (dashed lines) for $\alpha$ ranging from 0 to 4. Top right panel: The fractional derivatives of the linear B-spline $B_1$ for $\gamma = 0.25, 0.5, 0.75$. Bottom left panel: The fractional derivatives of the cubic B-spline $B
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: 'Unprecedentedly precise cosmic microwave background (CMB) data are expected from ongoing and near-future CMB Stage-III and IV surveys, which will yield reconstructed CMB lensing maps with effective resolution approaching several arcminutes. The small-scale CMB lensing fluctuations receive non-negligible contributions from nonlinear structure in the late-time density field. These fluctuations are not fully characterized by traditional two-point statistics, such as the power spectrum. Here, we use $N$-body ray-tracing simulations of CMB lensing maps to examine two higher-order statistics: the lensing convergence one-point probability distribution function (PDF) and peak counts. We show that these statistics contain significant information not captured by the two-point function, and provide specific forecasts for the ongoing Stage-III Advanced Atacama Cosmology Telescope (AdvACT) experiment. Considering only the temperature-based reconstruction estimator, we forecast 9$\sigma$ (PDF) and 6$\sigma$ (peaks) detections of these statistics with AdvACT. Our simulation pipeline fully accounts for the non-Gaussianity of the lensing reconstruction noise, which is significant and cannot be neglected. Combining the power spectrum, PDF, and peak counts for AdvACT will tighten cosmological constraints in the $\Omega_m$-$\sigma_8$ plane by $\approx 30\%$, compared to using the power spectrum alone.'
author:
- 'Jia Liu$^{1,2}$'
- 'J. Colin Hill$^{2}$'
- 'Blake D. Sherwin$^{3}$'
- 'Andrea Petri$^{4}$'
- 'Vanessa Böhm$^{5}$'
- 'Zoltán Haiman$^{2,6}$'
bibliography:
- 'paper.bib'
title: 'CMB Lensing Beyond the Power Spectrum: Cosmological Constraints from the One-Point PDF and Peak Counts'
---
Introduction {#sec:intro}
============
After its first detection in cross-correlation nearly a decade ago [@Smith2007; @Hirata2008] and subsequent detection in auto-correlation five years ago [@das2011; @sherwin2011], weak gravitational lensing of the cosmic microwave background (CMB) is now reaching maturity as a cosmological probe [@Hanson2013; @Das2013; @PolarBear2014a; @PolarBear2014b; @BICEPKeck2016; @Story2014; @Ade2014; @vanEngelen2014; @vanEngelen2015; @planck2015xv]. On their way to the Earth, CMB photons emitted at redshift $z=1100$ are deflected by the intervening matter, producing new correlations in maps of CMB temperature and polarization anisotropies. Estimators based on these correlations can be applied to the observed anisotropy maps to reconstruct a noisy estimate of the CMB lensing potential [@Zaldarriaga1998; @Zaldarriaga1999; @HuOkamoto2002; @Okamoto2003]. CMB lensing can probe fundamental physical quantities, such as the dark energy equation of state and neutrino masses, through its sensitivity to the geometry of the universe and the growth of structure (see Refs. [@Lewis2006; @Hanson2010] for a review).
In this paper, we study the non-Gaussian information stored in CMB lensing observations. The Gaussian approximation to the density field breaks down due to nonlinear evolution on small scales at late times. Thus, non-Gaussian statistics (i.e., statistics beyond the power spectrum) are necessary to capture the full information in the density field. Such work has been previously performed (theoretically and observationally) on weak gravitational lensing of galaxies, where galaxy shapes, instead of CMB temperature/polarization patterns, are distorted (hereafter “galaxy lensing”). Several research groups have found independently that non-Gaussian statistics can tighten cosmological constraints when they are combined with the two-point correlation function or angular power spectrum.[^1] Such non-Gaussian statistics have also been applied in the CMB context to the Sunyaev-Zel’dovich signal, including higher-order moments [@Wilson2012; @Hill2013; @Planck2013tSZ; @Planck2015tSZ], the bispectrum [@Bhattacharya2012; @Crawford2014; @Planck2013tSZ; @Planck2015tSZ], and the one-point probability distribution function (PDF) [@Hill2014b; @Planck2013tSZ; @Planck2015tSZ]. In all cases, substantial non-Gaussian information was found, yielding improved cosmological constraints.
The motivation to study non-Gaussian statistics of CMB lensing maps is three-fold. First, the CMB lensing kernel is sensitive to structures at high redshift ($z\approx2.0$, compared to $z\approx0.4$ for typical galaxy lensing samples); hence CMB lensing non-Gaussian statistics probe early nonlinearity that is beyond the reach of galaxy surveys. Second, CMB lensing does not suffer from some challenging systematics that are relevant to galaxy lensing, including intrinsic alignments of galaxies, photometric redshift uncertainties, and shape measurement biases. Therefore, a combined analysis of galaxy lensing and CMB lensing will be useful to build a tomographic outlook on nonlinear structure evolution, as well as to calibrate systematics in both galaxy and CMB lensing surveys [@Liu2016; @Baxter2016; @Schaan2016; @Singh2016; @Nicola2016]. Finally, CMB lensing measurements have recently entered a regime of sufficient sensitivity and resolution to detect the (stacked) lensing signals of halos [@Madhavacheril2014; @Baxter2016; @Planck2015cluster]. This suggests that statistics sensitive to the nonlinear growth of structure, i.e., non-Gaussian statistics, will also soon be detectable. We demonstrate below that this is indeed the case, taking as a reference experiment the ongoing Advanced Atacama Cosmology Telescope (AdvACT) survey [@Henderson2016].
Non-Gaussian aspects of the CMB lensing field have recently attracted attention, both as a potential signal and a source of bias in CMB lensing power spectrum estimates. Considering the lensing non-Gaussianity as a signal, a recent analytical study of the CMB lensing bispectrum by Ref. [@Namikawa2016] forecasted its detectability to be 40$\sigma$ with a CMB Stage-IV experiment. Ref. [@Bohm2016] performed the first calculation of the bias induced in CMB lensing power spectrum estimates by the lensing bispectrum, finding non-negligible biases for Stage-III and IV CMB experiments. Refs. [@Pratten2016] and [@Marozzi2016] considered CMB lensing effects arising from the breakdown of the Born approximation, with the former study finding that post-Born terms substantially alter the predicted CMB lensing bispectrum, compared to the contributions from nonlinear structure formation alone. We emphasize that the $N$-body ray-tracing simulations used in this work naturally capture such effects — we do not use the Born approximation. However, we consider only the lensing potential $\phi$ or convergence $\kappa$ here (related by $\kappa = -\nabla^2 \phi/2$), leaving a treatment of the curl potential or image rotation for future work (Ref. [@Pratten2016] has demonstrated that the curl potential possesses non-trivial higher-order statistics). In a follow-up paper, the simulations described here are used to more precisely characterize CMB lensing power spectrum biases arising from the bispectrum and higher-order correlations [@Sherwin2016].
We consider the non-Gaussianity in the CMB lensing field as a potential signal. We use a suite of 46 $N$-body ray-tracing simulations to investigate two non-Gaussian statistics applied to CMB lensing convergence maps — the one-point PDF and peak counts. We examine the deviation of the convergence PDF and peak counts from those of Gaussian random fields. We then quantify the power of these statistics to constrain cosmological models, compared with using the power spectrum alone.
The paper is structured as follows. We first introduce CMB lensing in Sec. \[sec:formalism\]. We then describe our simulation pipeline in Sec. \[sec:sim\] and analysis procedures in Sec. \[sec:analysis\]. We show our results for the power spectrum, PDF, peak counts, and the derived cosmological constraints in Sec. \[sec:results\]. We conclude in Sec. \[sec:conclude\].
CMB lensing formalism {#sec:formalism}
=====================
To lowest order, the lensing convergence ($\kappa$) is a weighted projection of the three-dimensional matter overdensity $\delta=\delta\rho/\bar{\rho}$ along the line of sight,
$$\label{eq.kappadef}
\kappa(\thetaB) = \int_0^{\infty} dz W(z) \delta(\chi(z)\thetaB, z),$$
where $\chi(z)$ is the comoving distance and the kernel $W(z)$ indicates the lensing strength at redshift $z$ for sources with a redshift distribution $p(z_s)=dn(z_s)/dz$. For CMB lensing, there is only one source plane at the last scattering surface $z_\star=1100$; therefore, $p(z_s)=\delta_D(z_s-z_\star)$, where $\delta_D$ is the Dirac delta function. For a flat universe, the CMB lensing kernel is
$$\begin{aligned}
W^{{\kappa_{\rm cmb}}}(z) &=& \frac{3}{2}\Omega_{m}H
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: 'We continue our study of Cartan schemes and their Weyl groupoids. The results in this paper provide an algorithm to determine connected simply connected Cartan schemes of rank three, where the real roots form a finite irreducible root system. The algorithm terminates: Up to equivalence there are exactly 55 such Cartan schemes, and the number of corresponding real roots varies between $6$ and $37$. We identify those Weyl groupoids which appear in the classification of Nichols algebras of diagonal type.'
address:
- 'Michael Cuntz, Fachbereich Mathematik, Universität Kaiserslautern, Postfach 3049, D-67653 Kaiserslautern, Germany'
- 'István Heckenberger, Philipps-Universität Marburg, Fachbereich Mathematik und Informatik, Hans-Meerwein-Straße, D-35032 Marburg, Germany'
author:
- 'M. Cuntz'
- 'I. Heckenberger'
bibliography:
- 'quantum.bib'
title: Finite Weyl groupoids of rank three
---
Introduction
============
Root systems associated with Cartan matrices are widely studied structures in many areas of mathematics, see [@b-BourLie4-6] for the fundaments. The origins of the theory of root systems go back at least to the study of Lie groups by Lie, Killing and Cartan. The symmetry of the root system is commonly known as its Weyl group. Root systems associated with a family of Cartan matrices appeared first in connection with Lie superalgebras [@a-Kac77 Prop.2.5.6] and with Nichols algebras [@a-Heck06a], [@a-Heck08a]. The corresponding symmetry is not a group but a groupoid, and is called the Weyl groupoid of the root system.
Weyl groupoids of root systems properly generalize Weyl groups. The nice properties of this more general structure have been the main motivation to develop an axiomatic approach to the theory, see [@a-HeckYam08], [@a-CH09a]. In particular, Weyl groupoids are generated by reflections and Coxeter relations, and they satisfy a Matsumoto type theorem [@a-HeckYam08]. To see more clearly the extent of generality it would be desirable to have a classification of finite Weyl groupoids.[^1] However, already the appearance of a large family of examples of Lie superalgebras and Nichols algebras of diagonal type indicated that a classification of finite Weyl groupoids is probably much more complicated than the classification of finite Weyl groups. Additionally, many of the usual classification tools are not available in this context because of the lack of the adjoint action and a positive definite bilinear form.
In previous work, see [@a-CH09b] and [@p-CH09a], we have been able to determine all finite Weyl groupoids of rank two. The result of this classification is surprisingly nice: We found a close relationship to the theory of continued fractions and to cluster algebras of type $A$. The structure of finite rank two Weyl groupoids and the associated root systems has a natural characterization in terms of triangulations of convex polygons by non-intersecting diagonals. In particular, there are infinitely many such groupoids.
At first view there is no reason to assume that the situation for finite Weyl groupoids of rank three would be much different from the rank two case. In this paper we give some theoretical indications which strengthen the opposite point of view. For example in Theorem \[cartan\_6\] we show that the entries of the Cartan matrices in a finite Weyl groupoid cannot be smaller than $-7$. Recall that for Weyl groupoids there is no lower bound for the possible entries of generalized Cartan matrices. Our main achievement in this paper is to provide an algorithm to classify finite Weyl groupoids of rank three. Our algorithm terminates within a short time, and produces a finite list of examples. In the appendix we list the root systems characterizing the Weyl groupoids of the classification: There are $55$ of them which correspond to pairwise non-isomorphic Weyl groupoids. The number of positive roots in these root systems varies between $6$ and $37$. Among our root systems are the usual root systems of type $A_3$, $B_3$, and $C_3$, but for most of the other examples we don’t have yet an explanation.
It is remarkable that the number $37$ has a particular meaning for simplicial arrangements in the real projective plane. An arrangement is the complex generated by a family of straight lines not forming a pencil. The vertices of the complex are the intersection points of the lines, the edges are the segments of the lines between two vertices, and the faces are the connected components of the complement of the set of lines generating the arrangement. An arrangement is called simplicial, if all faces are triangles. Simplicial arrangements have been introduced in [@a-Melchi41]. The classification of simplicial arrangements in the real projective plane is an open problem. The largest known exceptional example is generated by $37$ lines. Grünbaum conjectures that the list given in [@a-Gruenb09] is complete. In our appendix we provide some data of our root systems which can be used to compare Grünbaum’s list with Weyl groupoids. There is an astonishing analogy between the two lists, but more work has to be done to be able to explain the precise relationship. This would be desirable in particular since our classification of finite Weyl groupoids of rank three does not give any evidence for the range of solutions besides the explicit computer calculation.
In order to ensure the termination of our algorithm, besides Theorem \[cartan\_6\] we use a weak convexity property of certain affine hyperplanes, see Theorem \[convex\_diff2\]: We can show that any positive root in an affine hyperplane “next to the origin” is either simple or can can be written as the sum of a simple root and another positive root. Our algorithm finally becomes practicable by the use of Proposition \[pr:suminR\], which can be interpreted as another weak convexity property for affine hyperplanes. It is hard to say which of these theorems are the most valuable because avoiding any of them makes the algorithm impracticable (unless one has some replacement).
The paper is organized as follows. We start with two sections proving the necessary theorems to formulate the algorithm: The results which do not require that the rank is three are in Section \[gen\_res\], the obstructions for rank three in Section \[rk3\_obst\]. We then describe the algorithm in the next section. Finally we summarize the resulting data and make some observations in the last section.
**Acknowledgement.** We would like to thank B. M[ü]{}hlherr for pointing out to us the importance of the number $37$ for simplicial arrangements in the real projective plane.
Cartan schemes and Weyl groupoids {#gen_res}
=================================
We mainly follow the notation in [@a-CH09a; @a-CH09b]. The fundaments of the general theory have been developed in [@a-HeckYam08] using a somewhat different terminology. Let us start by recalling the main definitions.
Let $I$ be a non-empty finite set and $\{{\alpha }_i\,|\,i\in I\}$ the standard basis of ${\mathbb{Z}}^I$. By [@b-Kac90 §1.1] a generalized Cartan matrix ${C}=({c}_{ij})_{i,j\in I}$ is a matrix in ${\mathbb{Z}}^{I\times I}$ such that
1. ${c}_{ii}=2$ and ${c}_{jk}\le 0$ for all $i,j,k\in I$ with $j\not=k$,
2. if $i,j\in I$ and ${c}_{ij}=0$, then ${c}_{ji}=0$.
Let $A$ be a non-empty set, ${\rho }_i : A \to A$ a map for all $i\in I$, and ${C}^a=({c}^a_{jk})_{j,k \in I}$ a generalized Cartan matrix in ${\mathbb{Z}}^{I \times I}$ for all $a\in A$. The quadruple $${\mathcal{C}}= {\mathcal{C}}(I,A,({\rho }_i)_{i \in I}, ({C}^a)_{a \in A})$$ is called a *Cartan scheme* if
1. ${\rho }_i^2 = \id$ for all $i \in I$,
2. ${c}^a_{ij} = {c}^{{\rho }_i(a)}_{ij}$ for all $a\in A$ and $i,j\in I$.
Let ${\mathcal{C}}= {\mathcal{C}}(I,A,({\rho }_i)_{i \in I}, ({C}^a)_{a \in A})$ be a Cartan scheme. For all $i \in I$ and $a \in A$ define ${\sigma }_i^a \in
\operatorname{Aut}({\mathbb{Z}}^I)$ by $$\begin{aligned}
{\sigma }_i^a ({\alpha }_j) = {\alpha }_j - {c}_{ij}^a {\alpha }_i \qquad
\text{for all $j \in I$.}
\label{eq:sia}
\end{aligned}$$ The *Weyl groupoid of* ${\mathcal{C}}$ is the category ${\mathcal{W}}({\mathcal{C}})$ such that
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: 'Let $(R,{\mathfrak{m}})$ be a complete Noetherian local ring and let $M$ be a finite $R$–module of positive Krull dimension $n$. It is shown that any subset $T$ of ${\mbox{Assh}\,}_R(M)$ can be expressed as the set of attached primes of the top local cohomology module ${\mbox{H}\, }^n_{\mathfrak{a}}(M)$ for some ideal ${\mathfrak{a}}$ of $R$. Moreover if ${\mathfrak{a}}$ is an ideal of $R$ such that the set of attached primes of ${\mbox{H}\, }^n_{\mathfrak{a}}(M)$ is a non–empty proper subset of ${\mbox{Assh}\,}_R(M)$, then ${\mbox{H}\, }^n_{\mathfrak{a}}(M)\cong{\mbox{H}\, }^n_{\mathfrak{b}}(M)$ for some ideal ${\mathfrak{b}}$ of $R$ with ${\mbox{dim}\,}_R (R/{\mathfrak{b}})=1$.'
address:
- |
Mohammad T. Dibaei\
Faculty of Mathematical Sciences, Teacher Training University, Tehran, Iran, and Institute for Theoretical Physics and Mathematics (IPM), Tehran, Iran.
- |
Raheleh Jafari\
Faculty of Mathematical Sciences, Teacher Training University, Tehran, Iran
author:
- 'Mohammad T. Dibaei'
- Raheleh Jafari
title: |
Top local cohomology modules\
with specified attached primes
---
Introduction
============
Throughout $(R,{\mathfrak{m}})$ is a commutative Noetherian local ring with maximal ideal ${\mathfrak{m}}$, $M$ is a non-zero finite (i.e. finitely generated) $R$–module with positive Krull dimension $n:={\mbox{dim}\,}_R(M)$ and ${\mathfrak{a}}$ denotes an ideal of $R$. Recall that for an $R$–module $N$, a prime ideal ${\mathfrak{p}}$ of $R$ is said to be an [*attached prime*]{} of $N$, if ${\mathfrak{p}}={\mbox{Ann}\,}_R(N/K)$ for some submodule $K$ of $N$ (see [@MS]). The set of attached primes of $N$ is denoted by ${\mbox{Att}\,}_R(N)$. If $N$ is an Artinian $R$–module so that $N$ admits a reduced secondary representation $N=N_1+\cdots+N_r$ such that $N_i$ is ${\mathfrak{p}}_i$–secondary, $i=1,\ldots,r$, then ${\mbox{Att}\,}_R(N)=\{{\mathfrak{p}}_1,\ldots,{\mathfrak{p}}_r\}$ is a finite set.
Denote by ${\mbox{H}\, }^n_{\mathfrak{a}}(M)$ the $n$th right derived functor of $$\Gamma_{\mathfrak{a}}(M)=\{x\in M|\, {\mathfrak{a}}^rx=0 \ \mbox{for some positive
integer} \ r \}$$ applied to $M$. It is well-known that ${\mbox{H}\, }^n_{\mathfrak{a}}(M)$ is an Artinian module. Macdonald and Sharp, in [@MS], studied ${\mbox{H}\, }^n_{\mathfrak{m}}(M)$ and showed that ${\mbox{Att}\,}_R({\mbox{H}\, }^n_{\mathfrak{m}}(M))= {\mbox{Assh}\,}_R(M)$ where ${\mbox{Assh}\,}_R(M):=\{{\mathfrak{p}}\in
{\mbox{Ass}\,}_R(M)|\, {\mbox{dim}\,}_R(R/{\mathfrak{p}})=n\}$. It is shown in [@DY1 Theorem A], that for any arbitrary ideal ${\mathfrak{a}}$ of $R$, ${\mbox{Att}\,}_R({\mbox{H}\, }^n_{\mathfrak{a}}(M))=\{{\mathfrak{p}}\in{\mbox{Ass}\,}_R(M)|\, {\mbox{H}\, }^n_{\mathfrak{a}}(R/{\mathfrak{p}})\neq 0\}$ which is a subset of ${\mbox{Assh}\,}_R(M)$. In [@DY2], the structure of ${\mbox{H}\, }^n_{\mathfrak{a}}(M)$ is studied by the first author and Yassemi and they showed that, in case $R$ is complete, for any pair of ideals ${\mathfrak{a}}$ and ${\mathfrak{b}}$ of $R$, if ${\mbox{Att}\,}_R({\mbox{H}\, }^n_{\mathfrak{a}}(M))={\mbox{Att}\,}_R({\mbox{H}\, }^n_{\mathfrak{b}}(M))$, then ${\mbox{H}\, }^n_{\mathfrak{a}}(M) \cong {\mbox{H}\, }^n_{\mathfrak{b}}(M)$. They also raised the following question in [@DY3 Question 2.9] which is the main object of this paper.
[**Question.**]{} For any subset $T$ of ${\mbox{Assh}\,}_R(M)$, is there an ideal ${\mathfrak{a}}$ of $R$ such that ${\mbox{Att}\,}_R({\mbox{H}\, }^n_{\mathfrak{a}}(M)) = T$?
This paper provides a positive answer for this question in the case $R$ is complete.
Main Result
===========
In this section we assume that $R$ is complete with respect to the ${\mathfrak{m}}$–adic topology. As mentioned above, ${\mbox{Att}\,}_R({\mbox{H}\, }^n_{\mathfrak{m}}(M)) =
{\mbox{Assh}\,}_R(M)$ and ${\mbox{Att}\,}_R({\mbox{H}\, }^n_R(M)) = \emptyset$ is the empty set. Also ${\mbox{Att}\,}_R({\mbox{H}\, }^n_{\mathfrak{a}}(M)) \subseteq {\mbox{Assh}\,}_R(M)$ for all ideals ${\mathfrak{a}}$ of $R$. Our aim is to show that as ${\mathfrak{a}}$ varies over ideals of $R$, the set ${\mbox{Att}\,}_R({\mbox{H}\, }^n_{\mathfrak{a}}(M))$ takes all possible subsets of ${\mbox{Assh}\,}_R(M)$ (see Theorem 2.8). In the following results we always assume that $T$ is a non–empty proper subset of ${\mbox{Assh}\,}_R(M)$
In our first result we find a characterization for a subset of ${\mbox{Assh}\,}_R (M)$ to be the set of attached primes of the top local cohomology of $M$ with respect to an ideal ${\mathfrak{a}}$.
Assume that $n:={\mbox{dim}\,}_R(M)\geq 1$ and that $T$ is a proper non-empty subset of ${\mbox{Assh}\,}_R(M)$. Set ${\mbox{Assh}\,}_R(M)\setminus
T=\{{\mathfrak{q}}_1,\ldots,{\mathfrak{q}}_r\}$. The following statements are equivalent.
1. There exists an ideal ${\mathfrak{a}}$ of $R$ such that ${\mbox{Att}\,}_R({\mbox{H}\, }^n_{\mathfrak{a}}(M))=T$.
2. For each $i,\,1\leq i\leq r$, there exists $Q_i\in {\mbox{Supp}\,}_R(M)$ with ${\mbox{dim}\,}_R(R/Q_i)=1$ such that $$\underset{{\mathfrak{p}}\in T}{\bigcap}{\mathfrak{p}}\nsubseteq Q_i \quad \mbox{and}
\quad {\mathfrak{q}}_i\subseteq Q_i.$$
With $Q_i,\, 1\leq i\leq r$, as above, ${\mbox{Att}\,}_R({\mbox{H}\, }^n_{\mathfrak{a}}(M))=T$ where ${\mathfrak{a}}=\bigcap\limits_{i=1}^rQ_i$.
$(i)\Rightarrow (ii)$. By [@DY1 Theorem A], ${\mbox{H}\, }^n_{\mathfrak{a}}(R/{\mathfrak{p}})\neq 0$ for all ${\mathfrak{p}}\in T$, that is ${\mathfrak{a}}+{\mathfrak{p}}$ is ${\mathfrak{m}}$–primary for all ${\mathfrak{p}}\in T$ (by [Lichtenbaum-Hartshorne Theorem]{}). On the other hand, for $1\leq i\leq r, {\mathfrak{q}}_i\notin T$ which is equivalent to say that ${\mathfrak{a}}+{\mathfrak{q}}_i$ is not an ${\mathfrak{m}}$–primary ideal. Hence there exists a prime ideal $Q_i\in {\mbox{Supp}\,}_R(M)$ such that ${\mbox{dim}\,}_R(R/Q_i)=1$ and ${\mathfrak{a}}+{\mathfrak{q}}_i\subseteq Q_i$. It follows that $\underset{{\mathfrak{p}}\in
T}{\bigcap}{\mathfrak{p}}\nsubseteq Q_i$.\
$(ii)\Rightarrow (i)$. Set ${\mathfrak{a}}:=\bigcap\limits_{i=1}^rQ_i$. For each $i, 1\leq i\leq r$, ${\mathfrak{a}}+{\mathfrak{q}}_i\subseteq Q_
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: 'Noisy measurements of a physical unclonable function (PUF) are used to store secret keys with reliability, security, privacy, and complexity constraints. A new set of low-complexity and orthogonal transforms with no multiplication is proposed to obtain bit-error probability results significantly better than all methods previously proposed for key binding with PUFs. The uniqueness and security performance of a transform selected from the proposed set is shown to be close to optimal. An error-correction code with a low-complexity decoder and a high code rate is shown to provide a block-error probability significantly smaller than provided by previously proposed codes with the same or smaller code rates.'
address: |
Information Theory and Applications Chair, Technische Universität Berlin\
{[guenlue]{}, [rafael.schaefer]{}}[@tu-berlin.de]{}\
bibliography:
- 'references.bib'
title: |
LOW-COMPLEXITY AND RELIABLE TRANSFORMS FOR\
PHYSICAL UNCLONABLE FUNCTIONS
---
physical unclonable function (PUF), no multiplication transforms, secret key agreement, low complexity.
Introduction
============
Biometric identifiers such as fingerprints are useful to authenticate a user. Similarly, secret keys are traditionally stored in non-volatile memories (NVMs) to authenticate a physical device that contains the key. NVMs require hardware protection even when the device is turned off since an attacker can try to obtain the key at any time. A safe and cheap alternative to storing keys in NVMs is to use physical identifiers, e.g., fine variations of ring oscillator (RO) outputs, as a randomness source. Since invasive attacks to physical identifiers permanently change the identifier output, there is no need for continuous hardware protection for physical identifiers [@pufintheory].
Physical unclonable functions (PUFs) are physical identifiers with reliable and high-entropy outputs [@GassendThesis; @PappuThesis]. PUF outputs are unique to each device, so they are used for safe and low-complexity key storage in digital devices. These keys can be used for private authentication, secure computation, and encryption. Replacing such identifiers is expensive, so key-storage methods should limit the information the public data leak about the identifier outputs. Moreover, the same device should be able to reconstruct a secret key generated from the noiseless outputs by using the noisy outputs and public information. The ultimate secret-key vs. privacy-leakage rate tradeoffs are given in [@IgnaTrans; @LaiTrans; @benimdissertation]. The secret-key and privacy-leakage rate limits for a suboptimal chosen-secret (CS) model called *fuzzy commitment scheme* (FCS) [@FuzzyCommitment] are given in [@IgnatenkoFuzzy]. We consider the FCS to compare different post-processing methods applied to PUFs. Asymptotically optimal CS model constructions are given in [@bizimWZ] and similar comparison results can be obtained by using these constructions.
Physical identifier outputs are highly correlated and noisy, which are the two main problems in using PUFs. If errors in the extracted sequences are not corrected, PUF reliability would be low. If correlations are not eliminated, machine learning algorithms can model the PUF outputs [@MLPUF]. To solve the two problems, the discrete cosine transform (DCT) is used in [@bizimtemperature] to generate a uniformly-distributed bit sequence from PUFs under varying environmental conditions. Similarly, the discrete Walsh-Hadamard transform (DWHT), discrete Haar transform (DHT), and Karhunen-Loève transform (KLT) are compared in [@bizimMDPI] in terms of the maximum secret-key length, decorrelation efficiency, reliability, security, and hardware cost. The DCT, DWHT, and DHT provide good reliability and security results, and a hardware implementation of the DWHT in [@bizimMDPI] shows that the DWHT requires a substantially smaller hardware area than other transforms. There are two main reasons why the DWHT can be implemented efficiently. Firstly, the matrix that represents the DWHT has elements $1$ or $-1$, so there is no matrix multiplication. Secondly, an input-selection algorithm that is an extension of the algorithm in [@InputSelection] allows to calculate two-dimensional (2D) DWHT recursively. Based on these observations, we propose a new set of transforms that preserve these properties and that significantly improve the reliability of the sequences extracted from PUFs.
The FCS requires error-correction codes (ECCs) to achieve the realistic block-error probability of $\displaystyle P_\text{B}\!=\!10^{-9}$ for RO PUFs. The ECCs proposed in [@bizimMDPI] have better secret-key and privacy-leakage rates than previously proposed codes, but in some cases it is assumed that if multiple bits are extracted from each transform coefficient, each bit is affected by independent errors. This assumption is not valid in general. Thus, we extract only one bit from each transform coefficient. The contributions of this work are as follows.
- We propose a new set of 2D orthogonal transforms that have low-complexity hardware implementations and no matrix multiplications. The new set of transforms are shown to provide an average bit-error probability smaller than the most reliable transform considered in the PUF literature, i.e., DCT.
- Bit sequences extracted using a transform selected from the new set of transforms are shown to give good uniqueness and security results that are comparable to state-of-the-art results.
- We propose a joint transform-quantizer-code design method for the new set of transforms in combination with the FCS to achieve a block-error probability substantially smaller than the common value of $10^{-9}$ with perfect secrecy.
This paper is organized as follows. In Section \[sec:fuzzycommitment\], we review the FCS. The transform-coding algorithm to extract secure sequences from RO PUFs is explained in Section \[sec:commonsteps\]. A new set of orthogonal transforms that require a small hardware area and that result in bit-error probabilities smaller than previously considered transforms is proposed in Section \[sec:neworth\]. In Section \[sec:comparisons\], we compare the new transforms with previous methods and show that the proposed ECC provides a block-error probability for the new selected transform (ST) that is smaller than for previously considered transforms.
Review of the Fuzzy Commitment Scheme {#sec:fuzzycommitment}
=====================================
Fig. \[fig:fuzzycommitment\] shows the FCS, where an encoder ${\mathsf{Enc}}(\cdot)$ adds a codeword $\displaystyle C^N$, uniformly distributed over a set with cardinality $|\mathcal{S}|$, modulo-2 to the binary noiseless PUF-output sequence $\displaystyle X^N$ during enrollment. We show in Section \[sec:commonsteps\] that the sequence $X^N$ and its noisy version $Y^N$ can be obtained by applying the post-processing steps in Fig. \[fig:postprocessing\] to RO outputs $\widetilde{X}^L$ and its noisy version $\widetilde{Y}^L$, respectively. The sum $\displaystyle W^N=C^N{\mathbin{\oplus}}X^N$ is publicly sent through a noiseless and authenticated channel, and it is called *helper data*. The modulo-2 sum of $W^N$ and the noisy PUF-output sequence $Y^N =X^N {\mathbin{\oplus}}E^N$, where $E^N$ is the binary error vector, gives the noisy codeword $\displaystyle C^N{\mathbin{\oplus}}E^N$. Using the noisy codeword, a channel decoder $\displaystyle {\mathsf{Dec}}(\cdot)$ estimates the secret key $S$ during reconstruction. A reliable secret-key agreement is possible by using $X^N$, $Y^N$, and $W^N$ [@AhlswedeCsiz; @Maurer].
One can achieve a (secret-key, privacy-leakage) rate pair $ (R_\text{s}\text{,}R_\ell)$ using the FCS with perfect secrecy if, given any $\epsilon\!>\!0$, there is some $N\!\geq\!1$, and an encoder and a decoder for which $\displaystyle R_\text{s}=\frac{\log|\mathcal{S}|}{N}$ and $$\begin{aligned}
{2}
&\Pr[S\ne\hat{S}] \leq \epsilon && (\text{reliability}) \label{eq:reliabilityconst}\\
&I\big(S;W^N\big)\!=\!0 && (\text{perfect secrecy})\label{eq:secrecyconst}\\
&\frac{1}{N}I\big(X^N;W^N\big) \leq R_\ell+\epsilon. \quad\quad\quad&&(\text{privacy}) \label{eq:privacyconst}\end{aligned}$$ Condition (\[eq:secrecyconst\]) ensures that the public side information $W^N$ does not leak any information about the secret key, so one achieves perfect secrecy. The normalized information that $W^N$ leaks about the PUF output sequence $X^N$ is considered in (\[eq:privacyconst\]). If one should asymptotically limit the unnormalized privacy leakage $I(X^N;W^N)$, private keys available during enrollment and reconstruction
|
{
"pile_set_name": "ArXiv"
}
|
---
author:
- '$^{1}$Ryosuke Akashi[^1] and $^{1,2}$Ryotaro Arita'
title: 'Density Functional Theory for Plasmon-assisted Superconductivity'
---
Introduction
============
Superconductivity constitutes one of the most fascinating fields in condensed matter physics ever since its discovery in the early twentieth century. After the success of its description by the Bardeen-Cooper-Schrieffer theory,[@BCS] particular attention has been paid to the material dependence of the superconducting transition temperature ($T_{\rm c}$): that is, why some materials such as the celebrated cuprate[@Bednorz-Muller] exhibit high $T_{\rm c}$ but others do not? Since superconductivity emerges as a result of subtle interplay and competition of interactions between atoms and electrons having much larger energy scales, $T_{\rm c}$ is extremely sensitive to details of the electronic and crystal structure. Thus, an accurate quantitative treatment is essential to understand the emergence of high values of $T_{\rm c}$.
For the conventional phonon-mediated mechanism, quantitative calculations have been performed within the Migdal-Eliashberg (ME) theory[@Migdal-Eliashberg] implemented with the first-principles method based on the Kohn-Sham density functional theory[@Kohn-Sham-eq]: In a variety of systems, phonon properties are well reproduced by the density functional perturbation theory[@Baroni-review] or the total-energy method[@Kunc-Martin-frozen] within the local density approximation[@Ceperley-Alder; @PZ81]. By using the calculated phonon spectrum and electron-phonon coupling as inputs, it has been shown that the ME theory explains the qualitative tendency of $T_{\rm c}$ for various materials[@Savrasov-Savrasov; @Choi-MgB2]. However, the ME formalism is not suitable for full *ab initio* calculations since it is difficult to treat electron-electron interaction nonempirically. When we calculate $T_{\rm c}$ by solving the Eliashberg equation or using related approximate formulae such as the McMillan equation,[@McMillan; @AllenDynes] we vary the value of $\mu^{\ast}$ (Ref. ) representing the effective electron-electron Coulomb interaction which suppresses the Cooper-pair formation, and examine whether the range of the resulting $T_{\rm c}$ covers the experimentally observed value. With such a semi-empirical framework, the material dependence of the electron-electron interaction cannot be understood quantitatively.
The recent progress in the density functional theory for superconductors (SCDFT)[@Oliveira; @Kreibich; @GrossI] has changed the situation. There, a non-empirical scheme describing the physics in the ME theory was formulated: Based on the Kohn-Sham orbital, it treats the weak-to-strong electron-phonon coupling, the screened electron-electron interaction within the static approximation, and the retardation effect[@Morel-Anderson] due to the difference in the energy ranges of these interactions. This scheme has been demonstrated to reproduce experimental $T_{\rm c}$s of various conventional phonon-mediated superconductors with deviation less than a few K.[@GrossII; @Floris-MgB2; @Sanna-CaC6; @Bersier-CaBeSi] More recently, it has been employed to examine the validity of the ME theory in fully gapped superconductors with high $T_{\rm c}$ such as layered nitrides[@Akashi-MNCl] and alkali-doped fullerides.[@Akashi-fullerene] Through these applications, the current SCDFT has proved to be an informative method well-suited to investigate the nontrivial effects of the electron-electron interaction behind superconducting phenomena.
Although the electron-electron interaction just suppresses the pairing in the ME theory, possibilities of superconductivity induced by the electron-electron interaction have long been also explored. Since the discovery of the cuprates,[@Bednorz-Muller] superconductivity induced by short-range Coulomb interaction has been extensively investigated.[@Scalapino-review2012] On the other hand, there has been many proposals of superconducting mechanisms concerning long-range Coulomb interaction since the seminal work of Kohn and Luttinger.[@Kohn-Luttinger] In particular, there is a class of mechanisms that exploit the dynamical structure of the screened Coulomb interaction represented by the frequency-dependent dielectric function $\varepsilon(\omega)$: e.g., the plasmon[@Radhakrishnan1965; @Frohlich1968; @Takada1978; @Rietschel-Sham1983] and exciton[@Little1967] mechanisms. Interestingly, such mechanisms can cooperate with the conventional phonon mechanism. Since they usually favor $s$-wave pairing, they have a chance to enhance $s$-wave superconductivity together with the phonon mechanism. Taking this possibility into account, these mechanisms are important even where they do not alone induce superconductivity. Therefore, they are expected to involve a broader range of systems than originally expected in the early studies. In fact, for a variety of systems having low-energy electronic excitations, theoretical model calculations addressing such a cooperation have been performed: SrTiO$_{3}$ [@Koonce-Cohen1967; @Takada-SrTiO3] with small plasmon frequencies due to small electron densities, $s$-$d$ transition metals [@Garland-sd] where “demon" acoustic plasmons have been discussed,[@Pines-demon; @Ihm-Cohen1981] metals sandwiched by small-gap semiconductors [@Ginzburg-HTSC; @ABB1973], and layered systems where two-dimensional acoustic plasmons are proposed to become relevant [@Kresin1987; @Bill2002-2003]. Moreover, recent experimental discoveries of high-temperature superconductivity in doped band insulators have stimulated more quantitative analyses on effects of the cooperation [@Yamanaka1998; @Bill2002-2003; @Taguchi2006; @Taniguchi2012; @Ye2012].
Considering the above grounds, the situation calls for an *ab initio* theory that treats the phonon-mediated interaction and the dynamical screened Coulomb interaction together, with which one can study from the superconductors governed by phonons or the dynamical Coulomb interaction to those by their cooperation on equal footing. The aim of our present study is to establish this by extending the applicability of SCDFT. In this paper, we review the recent theoretical extension to include the plasmon-induced dynamical screened Coulomb interaction.[@Akashi-plasmon] In Sec. \[sec:theory\], we present the theoretical formulation and its practical implementation, and discuss how plasmons can enhance superconductivity. Section \[sec:appl-Li\] describes the application to elemental lithium under high pressures, for which the plasmon effect is expected to be substantial because of its relatively dilute electron density. In Sec. \[sec:summary\] we summarize our results and give concluding remarks.
Formulation {#sec:theory}
===========
General formalism {#subsec:theory-general}
-----------------
Let us start from a brief review of SCDFT.[@GrossI] The current SCDFT employs the gap equation $$\begin{aligned}
\Delta_{n{\bf k}}\!=\!-\mathcal{Z}_{n\!{\bf k}}\!\Delta_{n\!{\bf k}}
\!-\!\frac{1}{2}\!\sum_{n'\!{\bf k'}}\!\mathcal{K}_{n\!{\bf k}\!n'{\bf k}'}
\!\frac{\mathrm{tanh}[(\!\beta/2\!)\!E_{n'{\bf k'}}\!]}{E_{n'{\bf k'}}}\!\Delta_{n'\!{\bf k'}}
\label{eq:gap-eq}\end{aligned}$$ to obtain $T_{\rm c}$, which is specified as the temperature where the calculated value of gap function $\Delta_{n{\bf k}}$ becomes zero. Here, $n$ and ${\bf k}$ denote the band index and crystal momentum, respectively, $\Delta$ is the gap function, and $\beta$ is the inverse temperature. The energy $E_{n {\bf k}}$ is defined as $E_{n {\bf k}}$=$\sqrt{\xi_{n {\bf k}}^{2}+\Delta_{n {\bf k}}^{2}}$ and $\xi_{n {\bf k}}=\epsilon_{n {\bf k}}-\mu$ is the one-electron energy measured from the chemical potential $\mu$, where $\epsilon_{n {\bf k}}$ is obtained by solving the normal Kohn-Sham equation in density functional theory $
\mathcal{H}_{\rm KS}|\varphi_{n{\bf k}}\rangle=\epsilon_{n{\bf k}}
|\varphi_{n{\bf k}}\rangle
$ with $\mathcal{H}_{\rm KS}$ and $|\varphi_{n{\bf k}}\rangle$ being the Kohn-Sham Hamiltonian and the Kohn-Sham state, respectively. The functions $\mathcal{Z}$ and $\mathcal{K}$, which are called as the exchange-correlation kernels, describe the effects of all the interactions involved: They are defined as the second functional derivative of the free energy with respect to the anomalous electron density. A formulation of the free energy based on the Kohn-Sham perturbation theory\cite{} enables us practical calculations of the exchange-correlation functionals using the Kohn-Sham eigenvalues and eigenfunctions derived from standard *ab initio* methods.
The nondiagonal exchange-correlation kernel $\mathcal{K}$ is composed of two parts $\mathcal{K}$$=$$\mathcal{K}^{\rm ph}$$
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: 'Isotropic Heisenberg exchange naturally appears as the main interaction in magnetism, usually favouring long-range spin-ordered phases. The anisotropic Dzyaloshinskii-Moriya interaction arises from relativistic corrections and is *a priori* much weaker, even though it may sufficiently compete with the isotropic one to yield new spin textures. Here, we challenge this well-established paradigm, and propose to explore a Heisenberg-exchange-free magnetic world. There, the Dzyaloshinskii-Moriya interaction induces magnetic frustration in two dimensions, from which the competition with an external magnetic field results in a new mechanism producing skyrmions of nanoscale size. The isolated nanoskyrmion can already be stabilized in a few-atom cluster, and may then be used as LEGO${\textregistered}$ block to build a large magnetic mosaic. The realization of such topological spin nanotextures in $sp$- and $p$-electron compounds or in ultracold atomic gases would open a new route toward robust and compact magnetic memories.'
author:
- 'E. A. Stepanov$^{1,2}$, S. A. Nikolaev$^{2}$, C. Dutreix$^{3}$, M. I. Katsnelson$^{1,2}$, V. V. Mazurenko$^{2}$'
title: 'Heisenberg-exchange-free nanoskyrmion mosaic'
---
The concept of spin was introduced by G. Uhlenbeck and S. Goudsmit in the 1920s in order to explain the emission spectrum of the hydrogen atom obtained by A. Sommerfeld [@Int2]. W. Heitler and F. London subsequently realized that the covalent bond of the hydrogen molecule involves two electrons of opposite spins, as a result of the fermionic exchange [@Int4]. This finding inspired W. Heisenberg to give an empirical description of ferromagnetism [@Int5; @Int6], before P. Dirac finally proposed a Hamiltonian description in terms of scalar products of spin operators [@Int7]. These pioneering works focused on the ferromagnetic exchange interaction that is realized through the direct overlap of two neighbouring electronic orbitals. Nonetheless, P. Anderson understood that the exchange interaction in transition metal oxides could also rely on an indirect antiferromagnetic coupling via intermediate orbitals [@PhysRev.115.2]. This so-called superexchange interaction, however, could not explain the weak ferromagnetism of some antiferromagnets. The latter has been found to arise from anisotropic interactions of much weaker strength, as addressed by I. Dzyaloshinskii and T. Moriya [@DZYALOSHINSKY1958241; @Moriya]. The competition between the isotropic exchange and anisotropic Dzyaloshinskii-Moriya interactions (DMI) leads to the formation of topologically protected magnetic phases, such as skyrmions [@NagaosaReview]. Nevertheless, the isotropic exchange mainly rules the competition, which only allows the formation of large magnetic structures, more difficult to stabilize and manipulate in experiments [@NagaosaReview; @PhysRevX.4.031045]. Finding a new route toward more compact robust spin textures then appears as a natural challenge.
As a promising direction, we investigate the existence of two-dimensional skyrmions in the absence of isotropic Heisenberg exchange. Indeed, recent theoretical works have revealed that antiferromagnetic superexchange may be compensated by strong ferromagnetic direct exchange interactions at the surfaces of $sp$- and $p$-electron nanostructures [@silicon; @graphene], whose experimental isolation has recently been achieved [@PbSn; @PhysRevLett.98.126401; @SurfMagn; @kashtiban2014atomically]. Moreover, Floquet engineering in such compounds also offers the possibility to dynamically switch off the isotropic Heisenberg exchange interaction under high-frequency-light irradiation, a unique situation that could not be met in transition metal oxides in equilibrium [@PhysRevLett.115.075301; @Control1; @Control2]. In particular, rapidly driving the strongly-correlated electrons may be used to tune the magnetic interactions, which can be described by in terms of spin operators $\hat{\bf S}_i$ by the following Hamiltonian $$\begin{aligned}
H_{\rm spin} = -\sum_{{\ensuremath{\left\langle ij \right\rangle}}} J_{ij} (A) \,\hat{\bf S}_{i}\,\hat{\bf S}_{j} +
\sum_{{\ensuremath{\left\langle ij \right\rangle}}}{\bf D}_{ij} (A)\,[\hat{\bf S}_{i}\times\hat{\bf S}_{j}],
\label{Hspin}\end{aligned}$$ where the strengths of isotropic Heisenberg exchange $J_{ij}(A)$ and anisotropic DMI ${\bf D}_{ij}(A)$ now depend on the light amplitude $A$. The summations are assumed to run over all nearest-neighbour sites $i$ and $j$. The isotropic Heisenberg exchange term describes a competition between ferromagnetic direct exchange and antiferromagnetic kinetic exchange [@PhysRev.115.2]. Importantly, it may be switched off dynamically by varying the intensity of the high-frequency light, while the anisotropic DMI remains non-zero [@Control2].
![Stable nanoskyrmion-designed DMI abbreviation resulting from the Monte Carlo simulation of the Heisenberg-exchange-free model on the non-regular square lattice with $B_{z} = 1.2$. Arrows and color depict the in- and out-of-plane spin projection, respectively.[]{data-label="Fig1"}](Fig1.pdf){width="0.67\linewidth"}
The study of Heisenberg-exchange-free magnetism may also be achieved in other classes of systems, such as optical lattices of ultracold atomic gases. Indeed, cold atoms have enabled the observation and control of superexchange interactions, which could be reversed between ferromagnetic and antiferromagnetic [@Trotzky], as well as strong DMI [@Gong], following the realization of the spin-orbit coupling in bosonic and fermionic gases [@SO_Lin; @SO_Wang].
Here, we show that such a control of the microscopic magnetic interactions offers an unprecedented opportunity to observe and manipulate nano-scale skyrmions. Heisenberg-exchange-free nanoskyrmions actually arise from the competition between anisotropic DMI and a constant magnetic field. The latter was essentially known to stabilize the spin textures [@PhysRevX.4.031045], whereas here it is a part of the substantially different and unexplored mechanism responsible for nanoskyrmions. Fig. \[Fig1\] immediately highlights that an arbitrary system of few-atom skyrmions can be stabilized and controlled on a non-regular lattice with open boundary conditions, which was not possible at all in the presence of isotropic Heisenberg exchange.
[*Heisenberg-exchange-free Hamiltonian*]{} — Motivated by the recent predictions and experiments discussed above, we consider the following spin Hamiltonian $$\begin{aligned}
&\hat H_{\rm Hef} =
\sum_{{\ensuremath{\left\langle ij \right\rangle}}}{\bf D}_{ij}\,[\hat{\bf S}_{i}\times\hat{\bf S}_{j}] - \sum_{i}{\bf B}\hat{\bf S}_{i},
\label{DMI}\end{aligned}$$ where the magnetic field is perpendicular to the two dimensional system and ${\bf B}=~(0,0,B_{z})$. The latter tends to align the spins in the $z$ direction, while DMI flavors their orthogonal orientations. At the quantum level this non-trivial competition provides a fundamental resource in quantum information processing [@QuantInf]. Here, we are interested in the semi-classical description of the Heisenberg-exchange-free magnetism.
![Magnetic frustration in elementary DMI clusters of the triangular ([**a**]{}) and square ([**b**]{}) lattices. Curving arrows denote clockwise direction of the bonds in each cluster. Big gray arrows correspond to the in-plane DMI vectors. Black arrows in circles denote the in-plane directions of the spin moments. Blue dashed and red dotted lines indicate the bonds with minimal and zero DMI energy, respectively. ([**c**]{}) and ([**d**]{}) illustrate the examples of the spin configurations corresponding to classical ground state of the DMI Hamiltonian.[]{data-label="Fig2"}](Fig2.pdf){width="1\linewidth"}
[*DMI-induced frustration*]{} — In the case of the two-dimensional materials with pure DMI between nearest neighbours, magnetic frustration is the intrinsic property of the system. To show this let us start off with the elementary plaquettes of the triangular and square lattices without external magnetic field (see Fig. \[Fig2\]). Keeping in mind real two-dimensional materials with the $C_{nv}$ symmetry [@graphene; @silicon] we consider the in-plane orientation of the DMI vector perpendicular to the corresponding bond. Taking three spins of a single square plaquette as shown in Fig. \[Fig2\] [**b**]{}, one can minimize their energy while discarding their coupling with the fourth spin. Then, the orientation of the remaining spin can not be uniquely defined, because the spin configuration regardless whether it points “up” or “down” has the same energy, which indicates frustration. Thus, Fig. \[Fig2\] [**d**]{} gives the example of the classical ground state of the square plaquette with the energy ${\rm E}_{\square} = - {\mkern-6mu\mathop{}\oldsqrt[\mkern8mu]{2}}\,|\mathbf{D}_{ij}|\,S^2$ and magnetization ${\rm M}^z_{\square} = S
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: 'We use Stein’s method to bound the Wasserstein distance of order $2$ between a measure $\nu$ and the Gaussian measure using a stochastic process $(X_t)_{t \geq 0}$ such that $X_t$ is drawn from $\nu$ for any $t > 0$. If the stochastic process $(X_t)_{t \geq 0}$ satisfies an additional exchangeability assumption, we show it can also be used to obtain bounds on Wasserstein distances of any order $p \geq 1$. Using our results, we provide optimal convergence rates for the multi-dimensional Central Limit Theorem in terms of Wasserstein distances of any order $p \geq 2$ under simple moment assumptions.'
author:
- |
Thomas Bonis\
DataShape team, Inria Saclay, Université Paris-Saclay, Paris, France\
thomas.bonis@inria.fr
bibliography:
- 'Bibliography.bib'
title:
- 'Stein’s method for normal approximation in Wasserstein distances with application to the multivariate Central Limit Theorem [^1] '
- 'Stein’s method for normal approximation in Wasserstein distances with application to the multivariate Central Limit Theorem'
---
Acknowledgements {#acknowledgements .unnumbered}
================
The author would like to thank Michel Ledoux for his many comments and advice regarding the redaction of this paper as well as Jérôme Dedecker and Yvik Swan, Chi Tran and Frédéric Chazal for their multiple remarks.
[^1]: The author was supported by the French Délégation Générale de l’Armement (DGA) and by ANR project TopData ANR-13-BS01-0008.
|
{
"pile_set_name": "ArXiv"
}
|
---
address:
- 'Department of Mathematics, University of Michigan, East Hall, 525 East University Avenue, Ann Arbor, MI 48109-1109, USA'
- 'Department of Mathematics, University of Illinois at Chicago, 851 S. Morgan St., M/C. 249, Chicago, IL 60607-7045, USA'
- 'Department of Mathematics, Harvard University, 1 Oxford Street, Cambridge, MA 02138, USA'
author:
- Tommaso de Fernex
- Lawrence Ein
- Mircea Mustaţǎ
title: Bounds for log canonical thresholds with applications to birational rigidity
---
Introduction {#introduction .unnumbered}
============
Let $X$ be a smooth algebraic variety, defined over an algebraically closed field of characteristic zero, and let $V \subset X$ be a proper closed subscheme. Our main goal in this paper is to study an invariant of the pair $(X,V)$, called the log canonical threshold of $X$ along $V$, and denoted by $\operatorname{lc}(X,V)$. Interest in bounds for log canonical thresholds is motivated by techniques that have recently been developed in higher dimensional birational geometry. In this paper, we study this invariant using intersection theory, degeneration techniques and jet schemes.
A natural question is how does this invariant behave under basic operations such as restrictions and projections. Restriction properties have been extensively studied in recent years, leading to important results and conjectures. In the first section of this paper, we investigate the behavior under projections, and we prove the following result (see Theorem \[thm1\] for a more precise statement):
\[thm1-intro\] With the above notation, suppose that $V$ is Cohen-Macaulay, of pure codimension $k$, and let $f : X \to Y$ be a proper, dominant, smooth morphism of relative dimension $k-1$, with $Y$ smooth. If $f|_V$ is finite, then $$\operatorname{lc}(Y,f_*[V]) \leq \frac{k! \. \operatorname{lc}(X,V)^k}{k^k},$$ and the inequality is strict if $k\geq 2$. Moreover, if $V$ is locally complete intersection, then $$\operatorname{lc}(Y,f_*[V]) \leq \frac{\operatorname{lc}(X,V)^k}{k^k}.$$
Examples show that these bounds are sharp. The proof of the above theorem is based on a general inequality relating the log canonical threshold of a fractional ideal of the form $h^{-b}\. \a$, and the colength of $\a$. Here $\a$ is a zero dimensional ideal in the local ring of $X$ at some (not necessarily closed) point, $b\in{\mathbb Q}_+$, and $h$ is the equation of a smooth divisor. We prove this inequality in the second section (see Theorem \[l(a)-e(a)\]), using a degeneration to monomial ideals. It generalizes a result from [@DEM], which was the case $b=0$.
In the third section, we give lower bounds for the log canonical threshold of affine subschemes defined by homogeneous equations of the same degree. We prove the following
Let $V\subset X=\A^n$ be a subscheme defined by homogeneous equations of degree $d$. Let $c=\operatorname{lc}(\A^n, V)$, and let $Z$ be the non log terminal locus of $(\A^n, c\. V)$. If $e=\operatorname{codim}(Z,\A^n)$, then $$\operatorname{lc}(\A^n,V) \ge \frac{e}d.$$ Moreover, we have equality if and only if the following holds: $Z$ is a linear subspace, and if $\pi : \A^n\longrightarrow\A^n/Z$ is the projection, then there is a subscheme $V'\subset\A^n/Z$ such that $V=\pi^{-1}(V')$, $\operatorname{lc}(\A^n/Z,V')=e/d$, and the non log terminal locus of $(\A^n/Z,(e/d)\. V')$ is the origin.
The proof of this result is based on the characterization of the log canonical threshold via jet schemes from [@Mu2]. In the particular case when $V$ is the affine cone over a projective hypersurface with isolated singularities, the second assertion in the above result proves a conjecture of Cheltsov and Park from [@CP].
In the last section we apply the above bounds in the context of birational geometry. In their influential paper [@IM], Iskovskikh and Manin proved that a smooth quartic threefold is what is called nowadays birationally superrigid; in particular, every birational automorphism is regular, and the variety is not rational. There has been a lot of work to extend this result to other Fano varieties of index one, in particular to smooth hypersurfaces of degree $N$ in $\P^N$, for $N>4$. The case $N=5$ was done by Pukhlikov in [@Pu2], and the cases $N=6,7,8$ were proven by Cheltsov in [@Ch2]. Moreover, Pukhlikov showed in [@Pu5] that a general hypersurface as above is birationally superrigid, for every $N>4$. We use our results to give an easy and uniform proof of birational superrigidity for arbitrary smooth hypersurfaces of degree $N$ in $\P^N$ when $N$ is small.
\[thm3\_introd\] If $X\subset{\mathbb P}^N$ is a smooth hypersurface of degree $N$, and if $4\leq N\leq 12$, then $X$ is birationally superrigid.
Based on previous ideas of Corti, Pukhlikov proposed in [@Pu1] a proof of the birational rigidity of every smooth hypersurface of degree $N$ in $\P^N$, for $N\geq 6$. Unfortunately, at the moment there is a gap in his arguments (see Remark \[gap\] below). Despite this gap, the proof proposed in [@Pu1] contains many remarkable ideas, and it seems likely that a complete proof could be obtained in the future along those lines. In fact, the outline of the proof of Theorem \[thm3\_introd\] follows his method, and our contribution is mainly to simplifying and solidifying his argument.
Acknowledgements {#acknowledgements .unnumbered}
----------------
We are grateful to Steve Kleiman and Rob Lazarsfeld for useful discussions. Research of the first author was partially supported by MURST of Italian Government, National Research Project (Cofin 2000) “Geometry of Algebraic Varieties”. Research of the second author was partially supported by NSF Grant DMS 02-00278. The third author served as a Clay Mathematics Institute Long-Term Prize Fellow while this research has been done.
Singularities of log pairs under projections
============================================
Let $X$ be a smooth algebraic variety, defined over an algebraically closed field of characteristic zero, and let $V \subset X$ be a proper subscheme. For any rational number $c > 0$, we can consider the pair $(X,c\. V)$. The usual definitions in the theory of singularities of pairs, for which we refer to [@Ko], extend to this context. In particular, we say that an irreducible subvariety $C \subset X$ is a center of non log canonicity (resp. non log terminality, non canonicity, non terminality) for $(X,c\. V)$ if there is at least one divisorial valuation of $K(X)$, with center $C$ on $X$, whose discrepancy along $(X,c\.V)$ is $<-1$ (resp. $\le -1$, $<0$, $\le 0$). We will denote by $\operatorname{lc}(X,V)$ the log canonical threshold of the pair $(X,V)$, i.e., the largest $c$ such that $(X,c\. V)$ is log canonical. We will occasionally consider also pairs of the form $(X,c_1\. V_1-c_2\.V_2)$, where $V_1$, $V_2\subset X$ are proper subschemes of $X$. The definition of (log) terminal and canonical pairs extends in an obvious way to this setting.
We fix now the set-up for this section. Let $f : X \to Y$ be a smooth and proper morphism onto a smooth algebraic variety $Y$. We assume that $V\subset X$ is a pure dimensional, Cohen-Macaulay closed subscheme, such that $\dim V = \dim Y - 1$, and such that the restriction of $f$ to $V$ is finite. If $[V]$ denotes the cycle associated to $V$, then its push-forward $f_*[V]$ determines an effective Cartier divisor on $Y$. We set $\operatorname{codim}(V,X)=k$.
\[thm1\] With the above notation, let $C \subset X$ be an irreducible center of non log terminality for $(X,c\. V)$, for some $c>0$. Then $f(C)$ is a center of non log terminality (even non log canonicity, if $k\geq 2$) for the pair $$\label{gen_formula}
\( Y, \frac{k! \. c^k
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: 'The standing wave nodes of nonradial oscillations on a neutron star crust will drift with a definite angle velocity around rotational pole due to the rotation of neutron stars. This is called the nonradial oscillation node precession of neutron stars. This article estimated the precession velocity and pointed out that it merely lies on the star’s rotation velocity and the angular order of spherical harmonic $l$ by one order approximation. If we suppose that oscillations effect the particles’ escaping from the polar cap of a neutron star, so that the antinode and node areas of the standing waves have different radiative intensity, several unusual conclusions are acquired by reviewing the observation of pulsars which had already been taken as neutron stars. For example, the drifting subpulse period $P_{3}$ can be gotten from the width of subpulses and order $l$; the larger velocity drift may produce the peak structure of average pulse profiles; the dissimilar radiation phenomena between neighboring periods generated from drift provide a reasonable explanation of interpulses which have been found on some pulsars.'
author:
- |
[Haochen Li]{}\
[Physics Department, Washington University]{}\
[St. Louis, MO 63143]{}
date: 'March 28, 2001'
title: The Nonradial Oscillation Node Precession of Neutron Stars
---
=-2mm =-1.50mm =6.7in =8.5in
Introduction
============
####
Boriakoff (1976) had detected quasi-periodic micropulsations within the subpulses of PSR 2016+28, and inclined to take it as nonradial oscillations of neutron stars. In the pulsar polar cap model (Radhakrishnan and Cooke 1969) the radio pulse is produced by the coherent radiation of particles escaping from a certain surface area of the star(polar cap)along the magnetic field lines. Because of the high particle velocity, the radiation is emitted in a narrow cone, the axis of which coincide with the velocity vector of particles, which is tangential to the magnetic field lines. Since these are periodically distorted by the star’s vibration, the radiation cone will periodically change directions, switching on and off the radiopulse illumination of the observer(modulation). Van Horn (1980) pointed out that rotating, magnetized neutron stars can support a rich variety of oscillation modes and firstly suggested a possible association of subpulse drift and torsional oscillations. The special terms of the neutron stars are considered for calculating one order approximation of the frequency split of the torsional oscillations in Section 2. And using this result, we will discuss phenomena such as drifting subpulses, average pulse profiles and interpulses of pulsars in Section 3. Section 4 is the summary.
Theory of Neutron Star Oscillation Node Precession
==================================================
####
Ruderman (1968) firstly pointed out torsional oscillation modes of neutron star crusts. Hansen and Cioffi (1980) calculated the periods of those for a range of stellar models and found those associated with fundamental modes have periods of around 20 ms. We can use this result to estimate the lowest frequency of torsional oscillation of neutron stars as$$\omega_{0}={\frac{2\pi}{20ms}}=100\pi s^{-1}.$$ The rotation angular velocity of neutron star can be considered as $2\pi s^{-1}$, thus the ratio is $$\epsilon={\frac{\Omega}{\omega_{0}}}=0.02.$$ We can see that although the angular velocity of neutron star rotation is much larger than that of common stars, it is still small compared with the frequency of self-oscillation. This inspires us that the oscillation node precession theory which has been established on other heavenly bodies can be used on neutron stars (also because the torsional oscillation is little sensitive to sphere models, see Van Horn 1980, and its results is simple). That is, we can take rotation effect as perturbation to solve the sphere oscillation equations just as Ledoux (1951) did on gaseous stars and MacDonald and Ness (1961) did on the earth, and the frequency of free oscillation of sphere crust is the sum of the undisturbed frequency plus the perturbation frequency:$$\omega=\omega_{0}+\omega^{1}.$$ As one order approximation for torsional oscillation,$$\omega^{1}={\frac{m}{l(l+1)}}\Omega,$$ where $l$ and $m$ are integers denoting angular orders of spherical harmonic. As the theory of oscillation of stars (Ledoux 1951) and the earth(MacDonald and Ness 1961) has noted, each value of $m$ has two travelling waves associated with it. In the case of the earth one wave travels eastward, and its rate of travel is decreased by the angular velocity of earth rotation; the other travels westward, and its rate is faster. The waves corresponded with neighboring values of $m$ have relative angular velocity $${\frac{\Omega}{l(l+1)}}.$$ The combined effect is to produce a standing-wave pattern that for a given value of $m$ moves westward with the angular velocity $${\frac{\Omega}{l(l+1)}}$$ of its nodes, which is well known in seismology as the node precession of oscillations. And this is just the result we will use next to recur to the attempt which Van Horn (1980) had made to connect the torsional oscillation of rotating neutron stars with the observation phenomena of pulsars.
Discussion
==========
Drifting Subpulses
------------------
####
We suppose that the node and antinode of the standing wave separately correspond with those of subpulse radiate wave pattern, i.e., drifting subpulses reflect the node precession. Then the degrees of subpulse drift in one period of a pulsar rotation (Manchester and Taylor 1977) is $$D_{\phi}={\frac{\Omega}{l(l+1)}} P_{1}={\frac{360}{l(l+1)}},$$ where $P_{1}$ is the pulsar rotational period and 360 of longitude are equal to one pulsar period. We can see that when $D_{\phi}$ is smaller than the width of subpulses (the drifting subpulse observation results are exactly so, see Manchester and Taylor 1977), then we get the subpulse drifting-band spacing $$P_{3}={\frac{\frac{P_{2}}{P_{1}}\times360}{D_{\phi}}}={\frac{l(l+1)}{\frac{P_{1}}{P_{2}}}}$$(in units of $P_{1}$),where $P_{2}$ is the subpulse period (converted from degrees of longitude). We calculated the values of $P_{3}$ for several pulsars using the observational data from Van Horn(1980) and Wright and Fowler(1981). The results are listed in Table 1. Note that these are acquired with larger values of $l$, with which the values of $P_{3}$ increase. Several proximal values have been enumerated in the table for compare. The difference between theoretical and observational values probably due to error and disconsidering of the coupling of several values of $l$. The different values of $P_{3}$ in one pulsar are deemed to mode switch of different $l$.
Average Pulses
--------------
####
Theoretically we have no reasons to believe that the drifting pace of subpulses is always small. Then, for convenience we define drifting rate as $$V={\frac{\frac{P_{1}}{P_{2}}}{l(l+1)}},$$ which represents drift space (in units of $P_{2}$) in each rotational period of a pulsar. Because we could not find the integer drifting space (integer $V$), so the practically observed rate $V'$ rest with the decimal part of $V$. For example, if $V=3/2$ or $1/2$, then $V'=1/2$; if $V=5/3$, then $V'=2/3$ or $-1/3$(minus sign represents opposite drift direction). Here it implies that ${\frac{P_{1}}{P_{2}}}$ is integer which goes on the fact that it here represents the node number of the standing wave along the longitude of the sphere. When $l=1$ or $2$(the fundamental mode which the oscillation is most likely on), it is easy to determine that $V'$ will frequently get $1/2$, $1/6$, $2/6$(the same as $4/6$), etc. Unlike the smaller drifting pace discussed in Section 3.1, these values of $V'$ are too great to be detected as the drift we commonly mean (we do not know whether PSR 2303+30 listed in Table 1. belongs to these small $l$ modes). But in this situation subpulses will appear more frequently at the several fixures in the general radiate windows. The average pulse profiles imitated by computer program through adding a great many drifting periods show peak structures as displayed in Fig.1.
Interpulses
-----------
####
If the pulses of pulsars can embody the node precession of standing waves around the longitude of neutron stars, then according to the observed drifting pace $V'$ discussed above, it must have the circumstances that neighboring periods of pulses have different observational pictures especially when the standing wave length is longer than the general radiate window. For instance, once we see a pulse which practically is a fraction of the standing wave length(a node or nearby), then next period we see the antinode or nearby($V'=1/2$ is very common), therefore the different intensity pulses alternately occur along with the integral periods of rotation. This can give an natural explanation of interpulses (Manchester and Taylor 1977). The weaker pulse will be surely inclined to the nearby node
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: 'Using semi-empirical isochrones, we find the age of the Taurus star-forming region to be 3-4 Myr. Comparing the disc fraction in Taurus to young massive clusters suggests discs survive longer in this low density environment. We also present a method of photometrically de-reddening young stars using $iZJH$ data.'
---
Introduction
============
Taurus is a low-density star-forming region containing primarily low-mass stars and so represents an ideal laboratory for studying the environmental effects on circumstellar disc lifetimes [@Kenyon2008 (Kenyon et al. 2008)]. To investigate the impact of the low-density environment on the discs in Taurus, we used the Wide-Field Camera (WFC) on the 2.5m Isaac Newton Telescope (INT) on La Palma to obtain $griZ$ photometry of 40 fields in Taurus. Our fields are focused on the densest regions not covered by the Sloan Digital Sky Survey. The resultant INT-WFC survey mainly covers the L1495, L1521 and L1529 clouds.
We have augmented the WFC data with near-infrared $JHK$ data from 2MASS [@Cutri2003 (Cutri et al. 2003)]. To determine the age of Taurus we compare the semi-empirical isochrones discussed in [@Bell2013; @Bell2014 Bell et al. (2013, 2014)] to the observed colour-magnitude diagrams (CMDs). For a brief description of these isochrones see Bell et al. (these proceedings).
De-reddening
============
The extinction in Taurus is spatially variable across the different clouds, and so we require a method of de-reddening the stars individually. We have found that in an $i$-$Z$, $J$-$H$ colour-colour diagram the reddening vectors are almost perpendicular to the theoretical stellar sequence (Fig.\[fig:izjh\_age\]), whose position is almost independent of age, and so we can de-redden stars using photometry alone. We construct a grid of models over a range of ages (1 to 10 Myr) and binary mass ratios (single star to equal mass binary). We adopt the reddening law from [@Fitzpatrick1999 Fitzpatrick (1999)], apply it to the atmospheric models and fold the result through sets of filter responses to derive reddening coefficients in each photometric system.
[0.45]{} ![**Left:** $i$-$Z$, $J$-$H$ diagram for Taurus members. Asterisks are Class II sources, open circles are Class III sources. Overlaid as solid lines are a 2 and 4Myr isochrone. The dashed lines are reddening vectors in this colour space. **Right:** $r$, $r$-$i$ diagram for Taurus members identified as Class III. Isochrones of 1, 4 and 10Myr are overlaid. Asterisks indicate the position of a theoretical star with mass 0.75M$_\odot$. The black dashed line shows a reddening vector for A$_V$ = 1 mag. []{data-label="fig:izjh_age"}](izjh.eps "fig:"){width="\textwidth" height="5.5cm"} \[fig:izjh\_ccd\]
[0.45]{} ![**Left:** $i$-$Z$, $J$-$H$ diagram for Taurus members. Asterisks are Class II sources, open circles are Class III sources. Overlaid as solid lines are a 2 and 4Myr isochrone. The dashed lines are reddening vectors in this colour space. **Right:** $r$, $r$-$i$ diagram for Taurus members identified as Class III. Isochrones of 1, 4 and 10Myr are overlaid. Asterisks indicate the position of a theoretical star with mass 0.75M$_\odot$. The black dashed line shows a reddening vector for A$_V$ = 1 mag. []{data-label="fig:izjh_age"}](age.eps "fig:"){width="\textwidth" height="5.5cm"} \[fig:age\]
It is well known that for a fixed value of E(B-V), extinction in a given filter will vary with [$T_{\mathrm{eff}}$]{} (see e.g. [@Bell2013 Bell et al. 2013]). To account for this we use extinction tables to redden the isochrones for a grid of E($B$-$V$) and [$T_{\mathrm{eff}}$]{} values, and compare the reddened model grid to the data. We adopt a Bayesian approach and marginalise over binary mass, age and [$T_{\mathrm{eff}}$]{}. We take the extinction values from the model with the highest likelihood, and use this to de-redden the star.
Taurus
======
Plotting the de-reddened Taurus members in the $r$, $r$-$i$ CMD, we notice that a significant fraction of the Class II objects appear much fainter than the primary locus. This is likely an accretion effect, and if we were to fit for the age of these members we would derive an age that is erroneously old. To avoid this effect, we fit only the Class III sources. We note that those Class II sources that are not scattered below the sequence lie coincident with the Class III sources, and thus we believe the age derived from the Class III sources alone will be representative of the overall age. We plot our de-reddened Taurus members in an $r$, $r$-$i$ CMD to fit for the age (Fig.\[fig:izjh\_age\]). We find that isochrones of 3-4 Myr (older than is commonly quoted in the literature) trace the observed stellar sequence well. To ensure consistency with the [@Bell2013 Bell et al. (2013)] age scale we compare the position of a theoretical star with a mass of 0.75 M$_\odot$ to the middle of the observed sequence. We find consistency with the overall isochrone fitting, with an age of 3-4 Myr still providing a good fit. With a robust age for Taurus we then examined the disc fraction. Taurus has a disc fraction of 69% [@Luhman2010 (Luhman et al. 2010)]. If we compare this to the other clusters in [@Bell2013 Bell et al. (2013)], which are on the same age scale, we find that Taurus has the largest disc fraction in the sample, significantly higher than the group of young (2 Myr), massive clusters, suggesting that discs may have survived longer in the low density environment present in Taurus.
2013, *MNRAS*, 434, 806
2014, *MNRAS*, 445, 3496
2003, *2MASS All Sky Catalog of point sources.*
1999, *PASP*, 111, 63
2008, *Handbook of Star Forming Regions, Vol. 1*, p.405
2010, *ApJS*, 186, 111
|
{
"pile_set_name": "ArXiv"
}
|
---
abstract: 'Inspired by the paper of Tasaka [@tasaka], we study the relations between totally odd, motivic depth-graded multiple zeta values. Our main objective is to determine the rank of the matrix $C_{N,r}$ defined by Brown [@Brown]. We will give new proofs for (conjecturally optimal) upper bounds on ${\operatorname{rank}}C_{N,3}$ and ${\operatorname{rank}}C_{N,4}$, which were first obtained by Tasaka [@tasaka]. Finally, we present a recursive approach to the general problem, which reduces the evaluation of ${\operatorname{rank}}C_{N,r}$ to an isomorphism conjecture.'
address:
- 'Charlotte Dietze, Max-Planck-Institut für Mathematik,Vivatsgasse 7,53111 Bonn, Germany'
- 'Chorkri Manai, Max-Planck-Institut für Mathematik,Vivatsgasse 7,53111 Bonn, Germany'
- 'Christian Nöbel, Max-Planck-Institut für Mathematik,Vivatsgasse 7,53111 Bonn, Germany'
- 'Ferdinand Wagner, Max-Planck-Institut für Mathematik,Vivatsgasse 7,53111 Bonn, Germany'
author:
- Charlotte Dietze
- Chokri Manai
- Christian Nöbel
- Ferdinand Wagner
bibliography:
- 'mzv.bib'
date: September 2016
title: 'Totally Odd Depth-graded Multiple Zeta Values and Period Polynomials'
---
Introduction
============
In this paper we will be interested in $\mathbb{Q}$-linear relations among totally odd depth-graded multiple zeta values (MZVs), for which there conjecturally is a bijection with the kernel of a specific matrix $C_{N,r}$ connected to restricted even period polynomials (for a definition, see [@schneps] or [@gkz2006 Section 5]). For integers $n_1,\ldots,n_{r-1}\geq1$ and $n_r\geq2$, the MZV of $n_1,\ldots,n_r$ is defined as the number $$\begin{aligned}
\zeta(n_1,\ldots,n_r)\coloneqq \sum_{0<k_1<\cdots<k_r} \frac{1}{k_1^{n_1}\cdots k_r^{n_r}}{\,}.\end{aligned}$$ We call the sum $n_1+\cdots+n_r$ of arguments the weight and their number $r$ the depth of $\zeta(n_1,\ldots,n_r)$. One classical question about MZVs is counting the number of linearly independent $\mathbb Q$-linear relations between MZVs. It is highly expected, but for now seemingly out of reach that there are no relations between MZVs of different weight. Such questions become reachable when considered in the motivic setting. Motivic MZVs $\zeta^{\mathfrak m}(n_1,\ldots,n_r)$ are elements of a certain $\mathbb Q$-algebra $\mathcal H=\bigoplus_{N\geq 0}\mathcal H_N$ which was constructed by Brown in [@brownMixedMotives] and is graded by the weight $N$. Any relation fulfilled by motivic MZVs also holds for the corresponding MZVs via the period homomorphism $per\colon\mathcal H\to \mathbb R$.
We further restrict to depth-graded MZVs: Let $\mathcal Z_{N,r}$ and $\mathcal H_{N,r}$ denote the $\mathbb Q$-vector space spanned by the real respectively motivic MZVs of weight $N$ and depth $r$ modulo MZVs of lower depth. The depth-graded MZV of $n_1,\ldots,n_r$, that is, the equivalence class of $\zeta(n_1,\ldots,n_r)$ in $\mathcal Z_{N,r}$, is denoted by $\zeta_{\mathfrak D}(n_1,\ldots,n_r)$. The elements of $\mathcal H_{N,r}$ are denoted $\zeta_{\mathfrak D}^{\mathfrak m}(n_1,\ldots,n_r)$ analogously. The dimension of $\mathcal Z_{N,r}$ is subject of the Broadhurst-Kreimer Conjecture.
The generating function of the dimension of the space $\mathcal Z_{N,r}$ is given by $$\begin{aligned}
\sum_{N,r\geq0}\dim_{\mathbb Q}\mathcal Z_{N,r}\cdot x^N y^r\overset?= \frac{1- \mathbb E(x)y}{1-\mathbb O(x)y+\mathbb S(x) y^2 - \mathbb S(x)y^4}{\,},\end{aligned}$$ where we denote $\mathbb E(x)\coloneqq \frac{x^2}{1-x^2}=x^2+x^4+x^6+\cdots$, $\mathbb O(x)\coloneqq \frac{x^3}{1-x^2}=x^3+x^5+x^7+\cdots$, and $\mathbb S(x)\coloneqq \frac{x^{12}}{(1-x^4)(1-x^6)}$.
It should be mentioned that $\mathbb S(x)=\sum_{n>0}\dim\mathcal S_n\cdot x^n$, where $\mathcal S_n$ denotes the space of cusp forms of weight $n$, for which there is an isomorphism to the space of restricted even period polynomials of degree $n-2$ (defined in [@schneps] or [@gkz2006 Section 5]).
In his paper [@Brown], Brown considered the $\mathbb Q$-vector space $\mathcal Z_{N,r}^{{\operatorname{odd}}}$ (respectively $\mathcal H_{N,r}^{{\operatorname{odd}}}$) of totally odd (motivic) and depth-graded MZVs, that is, $\zeta_{\mathfrak D}(n_1,\ldots,n_r)$ (respectively $\zeta_{\mathfrak D}^{\mathfrak m}(n_1,\ldots,n_r)$) for $n_i\geq3$ odd, and linked them to a certain explicit matrix $C_{N,r}$, where $N=n_1+\cdots+n_r$ denotes the weight. In particular, he showed that any right annihilator $(a_{n_1,\ldots,n_r})_{(n_1,\ldots,n_r)\in S_{N,r}}$ of $C_{N,r}$ induces a relation $$\begin{aligned}
\sum_{(n_1,\ldots,n_r)\in S_{N,r}}a_{n_1,\ldots,n_r}\zeta_{\mathfrak D}^{\mathfrak m}(n_1,\ldots,n_r)=0{\,},\text{ hence also }\sum_{(n_1,\ldots,n_r)\in S_{N,r}}a_{n_1,\ldots,n_r}\zeta_{\mathfrak D}(n_1,\ldots,n_r)=0\end{aligned}$$(see Section \[sec:preliminaries\] for the notations) and conjecturally all relations in $\mathcal Z_{N,r}^{{\operatorname{odd}}}$ arise in this way. This led to the following conjecture (the uneven part of the Broadhurst-Kreimer Conjecture).
\[con:Brown\] The generating series of the dimension of $\mathcal Z_{N,r}^{{\operatorname{odd}}}$ and the rank of $C_{N,r}$ are given by $$\begin{aligned}
1+\sum_{N,r>0}{\operatorname{rank}}C_{N,r}\cdot x^Ny^r\overset?=1+\sum_{N,r>0}\dim_{\mathbb Q}\mathcal Z_{N,r}^{{\operatorname{odd}}}\cdot x^Ny^r\overset?=\frac1{1-\mathbb O(x)y+\mathbb S(x)y^2}{\,}.\end{aligned}$$
The contents of this paper are as follows. In Section \[sec:preliminaries\], we explain our notations and define the matrices $C_{N,r}$ due to Brown [@Brown] as well as $E_{N,r}$ and $E_{N,r}^{(j)}$ considered by Tasaka [@tasaka]. In Section \[sec:known results\], we briefly state some of Tasaka’s results on the matrix $E_{N,r}$. Section \[sec:main tools\] is devoted to further investigate the connection between the left kernel of $E_{N,r}$ and restricted even period polynomials, which was first discovered by Baumard and Schneps [@schneps] and appears again in [@tasaka Theorem 3.6]. In Section \[sec:main results\], we will apply our methods to the cases $r=3$ and $r=4$. The first goal of Section \[sec:main results\] will be to show
\[thm:case3\]Assume that the map from Theorem \[thm:injection\] is injective. We then have the lower bound $$\begin{aligned}
\sum_{N>0}\dim_{\mathbb Q}\ker C_{N,3}\cdot x^N\geq 2 \mathbb O(x)\mathbb
|
{
"pile_set_name": "ArXiv"
}
|
IFUP-TH 2013/21
1.4truecm
[**Background Field Method,**]{}
.5truecm
[**Batalin-Vilkovisky Formalism And**]{}
.5truecm
[**Parametric Completeness Of Renormalization**]{}
1truecm
*Damiano Anselmi* .2truecm
*Dipartimento di Fisica “Enrico Fermi”, Università di Pisa,*
*and INFN, Sezione di Pisa,*
*Largo B. Pontecorvo 3, I-56127 Pisa, Italy,*
.2truecm
damiano.anselmi@df.unipi.it
1.5truecm
**Abstract**
We investigate the background field method with the Batalin-Vilkovisky formalism, to generalize known results, study the parametric completeness of general gauge theories and achieve a better understanding of several properties. In particular, we study renormalization and gauge dependence to all orders. Switching between the background field approach and the usual approach by means of canonical transformations, we prove parametric completeness without making use of cohomological theorems; namely we show that if the starting classical action is sufficiently general all divergences can be subtracted by means of parameter redefinitions and canonical transformations. Our approach applies to renormalizable and nonrenormalizable theories that are manifestly free of gauge anomalies and satisfy the following assumptions: the gauge algebra is irreducible and closes off shell, the gauge transformations are linear functions of the fields, and closure is field independent. Yang-Mills theories and quantum gravity in arbitrary dimensions are included, as well as effective and higher-derivative versions of them, but several other theories, such as supergravity, are left out.
1truecm
Introduction
============
The background field method [@dewitt; @abbott] is a convenient tool to quantize gauge theories and make explicit calculations, particularly when it is used in combination with the dimensional-regularization technique. It amounts to choosing a nonstandard gauge fixing in the conventional approach and, among its virtues, it keeps the gauge transformations intact under renormalization. However, it takes advantage of properties that only particular classes of theories have.
The Batalin-Vilkovisky formalism [@bata] is also useful for quantizing general gauge theories, especially because it collects all ingredients of infinitesimal gauge symmetries in a single identity, the master equation, which remains intact through renormalization, at least in the absence of gauge anomalies.
Merging the background field method with the Batalin-Vilkovisky formalism is not only an interesting theoretical subject *per se*, but can also offer a better understanding of known results, make us appreciate aspects that have been overlooked, generalize the validity of crucial theorems about the quantization of gauge theories and renormalization, and help us address open problems. For example, an important issue concerns the generality of the background field method. It would be nice to formulate a unique treatment for all gauge theories, renormalizable and nonrenormalizable, unitary and higher derivative, with irreducible or reducible gauge algebras that close off shell or only on shell. However, we will see that at this stage it is not possible to achieve that goal, due to some intrinsic features of the background field method.
Another important issue that we want to emphasize more than has been done so far is the problem of *parametric completeness* in general gauge theories [@regnocoho]. To ensure renormalization-group (RG) invariance, all divergences must be subtracted by redefining parameters and making canonical transformations. When a theory contains all independent parameters necessary to achieve this goal, we say that it is parametrically complete. The RG-invariant renormalization of divergences may require the introduction of missing Lagrangian terms, multiplied by new physical constants, or even deform the symmetry algebra in nontrivial ways. However, in nonrenormalizable theories such as quantum gravity and supergravity it is not obvious that the action can indeed be adjusted to achieve parametric completeness. One way to deal with this problem is to classify the whole cohomology of invariants and hope that the solution satisfies suitable properties. This method requires lengthy technical proofs that must be done case by case [@coho], and therefore lacks generality. Another way is to let renormalization build the new invariants automatically, as shown in ref. [@regnocoho], with an algorithm that is able to iteratively extend the classical action converting divergences into finite counterterms. However, that procedure is mainly a theoretical tool, because although very general and conceptually minimal, it is practically unaffordable. Among the other things, it leaves the possibility that renormalization may dynamically deform the gauge symmetry in physically observable ways. A third possibility is the one we are going to treat here, taking advantage of the background field method. Where it applies, it makes cohomological classifications unnecessary and excludes that renormalization may dynamically deform the symmetry in observable ways. Because of the intrinsic properties of the background field method, the approach of this paper, although general enough, is not exhaustive. It is general enough because it includes the gauge symmetries we need for physical applications, namely Abelian and non-Abelian Yang-Mills symmetries, local Lorentz symmetry and invariance under general changes of coordinates. At the same time, it is not exhaustive because it excludes other potentially interesting symmetries, such as local supersymmetry.
To be precise, our results hold for every gauge symmetry that satisfies the following properties: the algebra of gauge transformations ($i$) closes off shell and ($ii$) is irreducible; moreover ($iii$) there exists a choice of field variables where the gauge transformations $\delta _{\Lambda }\phi $ of the physical fields $\phi $ are linear functions of $\phi $ and the closure $[\delta _{\Lambda
},\delta _{\Sigma }]=\delta _{[\Lambda ,\Sigma ]}$ of the algebra is $\phi $ independent. We expect that with some technical work it will be possible to extend our results to theories that do not satisfy assumption ($ii$), but our impression is that removing assumptions ($i$) and ($iii$) will be much harder, if not impossible.
In this paper we also assume that the theory is manifestly free of gauge anomalies. Our results apply to renormalizable and nonrenormalizable theories that satisfy the assumptions listed so far, among which are QED, Yang-Mills theories, quantum gravity and Lorentz-violating gauge theories [@lvgauge], as well as effective [@weinberg], higher-derivative [@stelle] and nonlocal [@tombola] versions of such theories, in arbitrary dimensions, and extensions obtained including any set of composite fields. We recall that Stelle’s proof [@stelle] that higher-derivative quantum gravity is renormalizable was incomplete, because it assumed without proof a generalization of the Kluberg-Stern–Zuber conjecture [@kluberg] for the cohomological problem satisfied by counterterms. Even the cohomological analysis of refs. [@coho] does not directly apply to higher-derivative quantum gravity, because the field equations of higher-derivative theories are not equal to perturbative corrections of the ordinary field equations. These remarks show that our results are quite powerful, because they overcome a number of difficulties that otherwise need to be addressed case by case.
Strictly speaking, our results, in their present form, do not apply to chiral theories, such as the Standard Model coupled to quantum gravity, where the cancellation of anomalies is not manifest. Nevertheless, since all other assumptions we have made concern just the forms of gauge symmetries, not the forms of classical actions, nor the limits around which perturbative expansions are defined, we expect that our results can be extended to all theories involving the Standard Model or Lorentz-violating extensions of it [@kostelecky; @LVSM]. However, to make derivations more easily understandable it is customary to first make proofs in the framework where gauge anomalies are manifestly absent, and later extend the results by means of the Adler-Bardeen theorem [@adlerbardeen]. We follow the tradition on this, and plan to devote a separate investigation to anomaly cancellation.
Although some of our results are better understandings or generalizations of known properties, we do include them for the sake of clarity and self-consistence. We think that our formalism offers insight on the issues mentioned above and gives a more satisfactory picture. In particular, the fact that background field method makes cohomological classifications unnecessary is something that apparently has not been appreciated enough so far. Moreover, our approach points out the limits of applicability of the background field method.
To achieve parametric completeness we proceed in four basic steps. First, we study renormalization to all orders subtracting divergences “as they come”, which means without worrying whether the theory contains enough independent parameters for RG invariance or not. Second, we study how the renormalized action and the renormalized $\Gamma $ functional depend on the gauge fixing, and work out how the renormalization algorithm maps a canonical transformation of the classical theory into a canonical transformation of the renormalized theory. Third, we renormalize the canonical transformation that continuously interpolates between the background field approach and the conventional approach. Fourth, comparing the two approaches we show that if the classical action $S_{c}(\phi ,\lambda )$ contains all gauge invariant terms determined by the starting gauge symmetry, then there exists a canonical transformation $\Phi ,K\rightarrow \hat{\Phi},\hat{K}$ such that $$S_{R\hspace{0.01in}\text{min}}(\Phi ,{\mkern2mu\underline{\mkern-2mu\smash{\phi }\mkern-2mu}\mkern2mu },K)=S_{c}(\hat{\phi}+{\mkern2mu\underline{\mkern-2mu\smash{\phi }\mkern-2mu}\mkern
|
{
"pile_set_name": "ArXiv"
}
|
End of preview. Expand
in Data Studio
README.md exists but content is empty.
- Downloads last month
- 1