ngram listlengths 0 9.89k |
|---|
[
"view more than the last 300 lines in the terminal",
"log? Or even a setting/plugin that does either? I keep",
"a log? Or even a setting/plugin that does either? I",
"to view more than the last 300 lines in the",
"in the terminal tab on OctoPrint? Or is there a",
"it long after the 300th line in the termi... |
[
"of most models turns out pretty bad. There are usually",
"turns out pretty bad. There are usually small gaps or",
"bad. There are usually small gaps or weird patterns. This",
"not happen with Ultimaker Cura, it will have a nice",
"it will have a nice smooth top layer. Is there",
"a nice smooth top layer.... |
[
"What distance nozzle-plate is optimal for PETG? (i.e. the distance",
"awesome strength and good looking (except for stringing). But I've",
"and good looking (except for stringing). But I've noticed that",
"looking (except for stringing). But I've noticed that PETG prints",
"build plate during calibration) ... |
[
"the nozzle. The nozzles I bought turned out to be",
"length * That plastic tube thing? Monoprice is very bad",
"the important specifications of a nozzle? * Thread size *",
"have tried to replace the nozzle. The nozzles I bought",
"replace the nozzle. The nozzles I bought turned out to",
"important specif... |
[
"is breakable and not so steady and reliable as PLA.",
"me another filament that can be useful for my intended",
"purpose is that the printed part is not stable enough",
"Or can anybody recommend me another filament that can be",
"for a filament which is breakable and not so steady",
"similar to the follo... |
[
"reinforce only the screw holes where it will have more",
"I made some 3D printed supports for tools, using screws",
"only the screw holes where it will have more stress/compress?",
"forces. Is there a way to reinforce only the screw",
"made some 3D printed supports for tools, using screws to",
"where it ... |
[
"big travel speed? What is maximum safe travel speed? My",
"stepper motors if I set too big travel speed? What",
"too big travel speed? What is maximum safe travel speed?",
"RepRap Neo. I currently use 120 mm/s. Is it safe",
"printer is a German RepRap Neo. I currently use 120",
"I set too big travel spee... |
[
"gears since I couldn't find any tutorial. (photo for reference",
"tutorial. (photo for reference and not mine) [![enter image description",
"I couldn't find any tutorial. (photo for reference and not",
"gears at the back of the wheel? (I use Sketchup)",
"wheel? (I use Sketchup) 2. Is 3d-printing such small... |
[
"softens the PLA. We check the feeder fan and is",
"Pausing the 3D printer and wait a few minutes is",
"**Edit:** The hotend is an all metal hot end. I",
"feeder is getting clogged because the high temperature softens the",
"printing time, the feeder gets clogged. And the feeder is",
"55°C for the bed (I ... |
[
"to demonstrate the problem. I'm sure that this has something",
"wheel adjustment, but tightening those did not change anything. How",
"I'm sure that this has something to do with the",
"the problem. I'm sure that this has something to do",
"it's increasing and decreasing for three times, which I just",
"... |
[
"gcode generated by Slic3r used: ``` ; Filament-specific end gcode",
"M104 S0 ; turn off extruder M140 S0 ; turn",
"print head up G28 X0 ; home x and y",
"Y180; Remove Print Position M84 ; disable motors M300 S2600",
"disable motors M300 S2600 P100; Beep ; filament used =",
"``` ; Filament-specific end gc... |
[
"way to specify an arbitrary axis? For example, this rotates",
"rotate(a=[90,0,0]) { cylinder(h=10,r1=10,r2=10); } ``` How to make it rotate",
"center: ``` rotate(a=[90,0,0]) { cylinder(h=10,r1=10,r2=10); } ``` How to make",
"{ cylinder(h=10,r1=10,r2=10); } ``` How to make it rotate around",
"this rotates a... |
[
"I run prints on my Creality CR-10S Pro 3D printer",
"set the heated bed to around 70 °C for PETG.",
"heated bed set point changes to 0 °C. Is it",
"some parts warping, and wonder if this is a potential",
"°C for PETG. after the first few layers, the heated",
"to 0 °C. Is it normal for a 3D printer",
"p... |
[
"bed it's showing zero in spite connecting to SMPS Please",
"the thermistor and nothing happened, the old thermistor is also",
"working. 1. I changed the thermistor and nothing happened, the",
"old thermistor is also showing the same temperature. 2. I",
"Please let me know how can I fix the problem?",
"°C... |
[
"and only have a vague idea of it's inner workings.",
"PLA? Will it work at all for that matter? If",
"idea of it's inner workings. I have a [E3D V6",
"have a [E3D V6 Extruder rated for 24 V](https://ru.aliexpress.com/item/3D-Printer-V6-Wade-Short-distance-J-head-Hotend-12V-for-1-75mm-3-0mm-Extruder/328100225... |
[
"on prints, and I'm not sure what caused this. I",
"it? [](https://i.stack.imgur.com/qRzOM.jpg) Edit: Changed absolutely nothing,",
"am printing with PLA Prosiment with 0.2 mm layer height",
"with PLA Prosiment with 0.2 mm layer height at ... |
[
"a Creatorbot 3D printer made by 3D PrinterWorks. Their website",
"installed Slic3r as 3D PrinterWorks has recommended in the handbook",
"but cannot download the settings for this from the 3D",
"in the handbook but cannot download the settings for this",
"website, since that is down. Does anyone know where ... |
[
"Here is my ending G-Code: ``` M104 S0 ;extruder heater",
"G91 ;relative positioning G1 E-1 F300 ;retract the filament a",
"relative positioning, so even then I don't know it's a",
"the filament a bit before lifting the nozzle, to release",
"a good idea to just set it for the max",
"still has relative pos... |
[
"am not able to \"repair\" my 3D printer. Every time,",
"flow rate a lot and calculated the perfect percentage etc.)",
"I already bought the original hotend long time ago and",
"a nightmare to remove the PLA filament from my Bowden",
"print fails, it is a nightmare to remove the PLA",
"and with the \"fan ... |
[
"of error normal? Is it caused by overextrusion, or does",
"error being almost exactly 0.2 mm, which is half of",
"inner and outer dimensions - for example, a nominally 3",
"of the slice rather than offset by approximately half the",
"the curve of the slice rather than offset by approximately",
"and 3.1 m... |
[
"chemicals if in contact with heated water for a substantial",
"have to do to make sure the print is food",
"in contact with heated water for a substantial amount of",
"there's anything special you'd have to do to make sure",
"considered food safe from what I can find. I have",
"food safe, or as in my cas... |
[
"up at the PSU side: [![Power supply connections](https://i.stack.imgur.com/yHZxm.png \"Power supply",
"of PCB](https://i.stack.imgur.com/lGGSF.jpg \"Close up of PCB\")](https://i.stack.imgur.com/lGGSF.jpg \"Close up of PCB\")",
"via USB to laptop. Upon closer inspection I found a",
"when connected via USB to... |
[
"all like a polyhedron, so that worked out fine. The",
"The filament seems to lose its translucency past a certain",
"get it to come out properly? For reference, I'm using",
"hemispheres. * Duplicate the hemisphere. Move the second one down",
"unchanged. * Doing the same trick again that I used",
"referen... |
[
"manually set the home position, so when I start the",
"that the \"ZMIN\" endstop isn't precise enough and my hotend",
"always either too far from or too close to the",
"it doesn't have to home again; Or maybe some other",
"also be helpful if I could use just the \"ZMAX\"",
"printer, It just starts printi... |
[
"not make things better. I've read the [Prusa problem page](https://www.prusaprinters.org/7-problems-affecting-quality-of-3d-prints),",
"is thinner that ordinary walls. Is the extrusion speed lower",
"changing the extrusion speed for infill? Side note: my printer",
"* flexible filament (I'm using PETG, so thi... |
[
"to move that 10 mm at a set speed and",
"Can the machine do so regardless of the instructions given",
"a single road width, say 10 mm long. If the",
"split a single straight line of filament into multiple lines",
"of Gcode by having a variable extrusion rate? - Can",
"makes sense; I understand that G-cod... |
[
"I have tried changing material preset to different PLA profiles",
";move Z to min endstops G1 Z15.0 F9000 ;move the",
"G1 F1500 E-6.5 ;LAYER_COUNT:96 ;LAYER:0 M107 G0 F600 X90.425 Y93.152",
"1.44191m ;Layer height: 0.15 ;Generated with Cura_SteamEngine 3.4.1 T0 M190",
";Generated with Cura_SteamEngine 3.4.... |
[
"one, saw the first layer laid down well, went to",
"series (printing Lack enclosure components). First 10 hour print was",
"second long print in a series (printing Lack enclosure components).",
"this, and I'm better off just buying a new hot",
"are too. I'm assuming there's no solvent for this, and",
"le... |
[
"first and second layer of print](https://i.stack.imgur.com/fY6wJ.jpg) I have only been",
"it was motor skipping, so I strengthened the spring, but",
"fix this issue. Hopefully someone has some idea what is",
"the nozzle which then melts pulls of another random bit.",
"towards the nozzle which then melts pu... |
[
"more. Of course, always uploading the files again is also",
"cycle?** The values (0.00, -3.00, 0.00) seem to be constant",
"volume. I noticed that this happens after a power-off cycle.",
"any more. Of course, always uploading the files again is",
"damaged after a power off cycle?** The values (0.00, -3.00,... |
[
"setup just as it was before, but the bed still",
"as it was before, but the bed still doesn't heat.",
"bed contacts, whether using G-code from the terminal (in both",
"the Merlin config I missed? Is the board smart enough",
"contacts, whether using G-code from the terminal (in both Repetier",
"registers ... |
[
"goes up 3. The sensor triggers 4. The BLTouch stows",
"0.018 mm* * *Max: 0.027 mm* * *Range: 0.008 mm*",
"the bed before the z-axis goes down for the second",
"The BLTouch deploys and crashes the bed before the z-axis",
"bed before the z-axis goes down: 1. The BLTouch deploys",
"z-axis goes down: 1. The ... |
[
"different spools of PLA (same manufacturer just different color). The",
"print seems like it has a little over-extrusion while the",
"has some under-extrusion artifacts despite the higher printing temperature. The",
"temperatures](https://i.stack.imgur.com/biydn.jpg)](https://i.stack.imgur.com/biydn.jpg) Cou... |
[
"the other extruder which I know works with PLA, but",
"re-leveling the bed, etc. I don't want to go through",
"the bed, etc. I don't want to go through the",
"I don't want to go through the hassle of replacing",
"it down, re-leveling the bed, etc. I don't want to",
"nozzle. I've tried the other extruder ... |
[
"error, I can not even do any tests for parameter",
"to stl\". Here is my M(N)WE: ``` // test.scad objectID",
"script) that says \"Set objectID to 1, render and export",
"} else if (objectID == 2) difference(){ cube(50, center=true); cube([35,35,70],",
"difference(){ cube(50, center=true); cube([35,35,70], ... |
[
"printing much as I expect but the parts when removed",
"and fail to harden any further in sunlight or UV",
"bend and distort under its own weight while printing. I",
"under its own weight while printing. I am using LCD-T",
"its own weight while printing. I am using LCD-T resin,",
"resin, I have increased... |
[
"it did nothing on the Y and actually never helped",
"have been sliced with Ultimaker Cura and printed on an",
"not that strong (the skirting on the bottom of that",
"no change on jerking and acceleration from default settings. Cube",
"have tightened the belts already and while that reduced the",
"Cura an... |
[
"it interlocks with Ultimaker Cura. I want to print this",
"with my Anet A8 printer and how it interlocks with",
"happens, but then it stops, not going on at all.",
"then it stops, not going on at all. What might",
"slices it fine, but when it comes to printing all",
"stops, not going on at all. What migh... |
[
"the SD card. I'm using the standard filament that comes",
"I am trying to just print the box directly from",
"the printer. I'm not sure what type it is. All",
"am trying to just print the box directly from the",
"models on the SD card. I'm using the standard filament",
"up my Anet A6 today. I am trying t... |
[
"currently trying to implement a data collector on my Replicator+",
"**official** reference for this? MakerBot used to host a [wiki",
"reference for this? MakerBot used to host a [wiki site](http://wiki.makerbot.com/),",
"Is there an **official** reference for this? MakerBot used to",
"a data collector on m... |
[
"persists. 2. I have adjusted the stepper driver voltages, and",
"print an object the extruder just starts \"clicking\".** What I",
"extruder stepper driver is bad in some way. Yet again,",
"in some way. Yet again, it works fine when simply",
"some way. Yet again, it works fine when simply extruding...",
... |
[
"removing it with a cutter. Is there any clue or",
"Flash Forge Creator, and when I print big parts (only",
"Creator, and when I print big parts (only in this",
"about 25% of the bottom of the printed object sticking",
"bottom of the printed object sticking very hard to its",
"am using a Flash Forge Creat... |
[
"used the pneumatic fittings wrong and thought I was supposed",
"issue is always the same: the bowden tube has backed",
"print a few layers, the extruder jambs and the issue",
"working, however, I'm doing something wrong with installing the bowden",
"(Needless to say, I wrecked a lot of fittings that",
"t... |
[
"this before? All other areas seem to be doing well.",
"the build plate with all bridges fully supported. Has anyone",
"top layer print issue\") --- If it helps, I haven't",
"the fan speed if I feel troubled by the result.*",
"see in the image the wrinkles seem to run parallel,",
"speed 100 %, I am printi... |
[
"but I cannot think of one because 1 m feeded",
"extruded - no matter what kind of platics used, right?",
"of plastics used, **0.9 for PLA** and **1.0 for ABS**.",
"the so-called **Extrusion Multiplier (EM)** or **Flow** setting in slicers",
"implies that there is a *physical property* that justifies the",
... |
[
"1.75 mm. Attached the image of the printing result. What",
"SD card that comes with the printer. PLA 1.75 mm.",
"the image of the printing result. What went wrong? I",
"What went wrong? I didn't change or modify any settings",
"YouTube videos and after correct leveling, I printed the test",
"modify any s... |
[
"the temperature rating for hardboard. I want to use that",
"enclosure. It has proven incredible hard get a ball-park figure",
"printer enclosure. It has proven incredible hard get a ball-park",
"figure from Google. So, what is the maximum safe temperature",
"a ball-park figure from Google. So, what is the ... |
[
"tends to occur sometimes. Any help appreciated. Is there something",
"What is the cause? The first image shows my mesh",
"first image shows my mesh which its generated from. I've",
"occur sometimes. Any help appreciated. Is there something going over",
"cause? The first image shows my mesh which its genera... |
[
"sure if its safe to have plastic from a 3D",
"if its safe to have plastic from a 3D printer",
"my own icing smoothers, but I'm not sure if its",
"have plastic from a 3D printer in contact with cake",
"to 3d print my own icing smoothers, but I'm not",
"contact with cake icing. Is there any harm in this?",... |
[
"printer. I recreated the profile to the best of my",
"2. Checking the extruder for signs of too little tension",
"I incrementally increased the extrusion rate from 100 % all",
"then I also tried the beta version of Ultimaker Cura",
"the prints are very strong. Then about three weeks ago,",
"The prints lo... |
[
"was of course on AC, which is always Alternating.. hence",
"electrician newbie I have a question.. Short question -------------- My",
"I put the test screw driver on the live (brown)",
"the current was flowing. But there was no sign of",
"-------------- My power plug is attached to the wall outlet",
"how... |
[
"seem to provide the best results (pic.3) however notice the",
"two days I have tried everything I could come up",
"issues. It all started with bad bed adhesion.(pic.1) Solutions for",
"come up with to fix the following issues. It all",
"started with bad bed adhesion.(pic.1) Solutions for these problems are... |
[
"and would like to work on a project to 3D",
"here and would like to work on a project to",
"is the most affordable way to do it? How do",
"to work on a project to 3D print a precision",
"to 3D print a precision prototype. What is the most",
"What is the most affordable way to do it? How",
"work on a pr... |
[
"and then >T1< on the next line. What does this",
"on one line and then >T1< on the next line.",
"alone on one line and then >T1< on the next",
"for slicing my print objects. IdeaMaker start strings have a",
"start strings have a >T0< standing alone on one line",
">T0< standing alone on one line and then ... |
[
"I don't know if it is reading the wrong temperature",
"degrees Celsius, but it is set to 200 degrees. I",
"is set to 200 degrees. I don't know if it",
"go back down. I don't know if the hot end",
"pushes out plastic when I force it. It will climb",
"don't know if it is reading the wrong temperature becau... |
[
"and why should I enable it? How does one do",
"Protection (TRP) and why should I enable it? How does",
"(TRP) and why should I enable it? How does one",
"is Thermal Runaway Protection (TRP) and why should I enable",
"I enable it? How does one do so in Marlin?",
"Runaway Protection (TRP) and why should I ... |
[
"Fill Density: 15 %, Hexagon, Every 2 Layers, * Print",
"Every 2 Layers, * Print Speed: 60 mm/s, * Travel",
"Height: 0.27 mm, * Perimeter Shells: 2, * Top Solid",
"use of ABS on my printer for the nozzle and",
"mm, * Perimeter Shells: 2, * Top Solid Layers: 4,",
"a few more moments, one side will peel up ... |
[
"- 2.4 ohm, the second smaller noname from color printer",
"1.4(set to 1/32 micro stepping) and drivers drv8825. [See my",
"with ramps 1.4(set to 1/32 micro stepping) and drivers drv8825.",
"previous question.](https://3dprinting.stackexchange.com/questions/8480/errorprinter-halted-kill-called) After some tim... |
[
"beginning of my prints re-introduces the problem. The right side",
"4 springs, on top of the original plate. I made",
"my prints re-introduces the problem. The right side seems to",
"for prints to fail. I can't figure out what the",
"a mainstream bed leveling test from thingiverse. I use a",
"thingiverse... |
[
"heated build platform on a Prusa i3 Pro W. This",
"build platform on a Prusa i3 Pro W. This results",
"in: [)](https://i.stack.imgur.com/G00Um.jpg)) Please explain why it prints",
"print a calibration cube from PLA using a 70 °C",
"a cali... |
[
"me? I need a machine that pumps air out of",
"pumps air out of my 3d printing enclosure, about 4",
"need to be top notch equipment, just enough for my",
"a machine that pumps air out of my 3d printing",
"to window) What kind of pump or fan can pump",
"for better general air quality in my room after openi... |
[
"reduced retraction distance? Or are there other ways to avoid",
"get stringing all over the place, and since the material",
"3. Using CuraEngine for slicing. The extruder is feeding the",
"place, and since the material isn't brittle, it's really difficult",
"remove. I'm using a bed temp of 60 and print",
... |
[
"somehow or am I missing something? Is there a way",
"layer shifting was happening, also the extruder-motors lost many steps.",
"TMC2100](https://www.aliexpress.com/item/Makerbot-Replicator-2-3D-Printer-Part-Makerbot-TMC2100-V1-0-Stepper-Motor-Driver-Module-With-Heatsink/32870918354.html). According to the prod... |
[
"that 3D printers make nanoparticles. But is that actually a",
"evil.*[citation needed]* Wait, What? --- 1. [Plastic waste disintegrates into",
"obvious danger in the particles themselves. Who decided that these",
"today that will suck up your nanoparticles for you. However,",
"is that actually a safety con... |
[
"/ -2 / 2` should also be -0.5 for the",
"have run into something that I find strange. Take a",
"complicated math in OpenSCAD and I have run into something",
"That is `echo(2 / -2 / 2);` gives `ECHO: -2`.",
"By any programming language this will equal 0.5 (1/2), and",
"this will equal 0.5 (1/2), and OpenS... |
[
"riddles me is that the side parts, and the pole's",
"But after seeing lots of videos and reading lots of",
"have a Geeetech's Prusa i3 mk2 B. I'm trying to",
"don't understand how to tune my print for that simple",
"I'm facing, so it would be much more easy to",
"all this: * Changing the slicer program (... |
[
"mm). Over the past I have printed many objects with",
"Vinci 1.0 (ABS only). I found that while the brim",
"work around ? [![Part of brim that stopped printing](https://i.stack.imgur.com/TJPFb.jpg \"Part",
"being printing (using default configuration of XYZWare; the da Vinci",
"can I work around ? [](https://i.stack.imgur.com/o07nG.jpg)",
"but the resin model don't. T... |
[
"months of owning it I have made lots of amazing",
"all cleaning station items from my living space. I had",
"symptoms, and have discontinued allergy medication. Other than not own",
"printer even in an enclosure outside would be hard due",
"recovering from my symptoms, and have discontinued allergy medicat... |
[
"Slicing with CuraEngine. Could this be caused by underextrusion or",
"the error should not be caused by poor chord approximation;",
"caliper. Cubes exhibit a less severe version of the same",
"compensate for it, short of fudging the model? Some additional",
"significant increasing relative error), but the ... |
[
"with just a bootloader and no firmware, so I'm not",
"right now with just a bootloader and no firmware, so",
"been having trouble uploading the TH3DUF\\_R2 firmware to my CR-10.",
"the TH3DUF\\_R2 firmware to my CR-10. I've already successfully flashed",
"is not functional right now with just a bootloader ... |
[
"to run a Creality Ender 3 3D printer every day",
"power use per hour would be nice, then I can",
"figure out how much it costs me. Can anyone help",
"per hour would be nice, then I can figure out",
"for several hours at a time? Like what does it",
"hours at a time? Like what does it eat up",
"out how m... |
[
"a separate device providing one multi color filament out of",
"in multi color as it adds multi color printing to",
"--- **About the Palette 2** [Palette 2](https://www.mosaicmfg.com/products/palette-2) is a separate",
"an Ender 3? If so, what is your steps/mm for",
"your steps/mm for the Ender 3 and your f... |
[
"current patterns to move the motor. And that a current",
"low-pass filtering of that DC level, or a high-pass of",
"the first two causes from the last one (when it's",
"motor is holding its position, is there anything distinctive about",
"I watched the waveforms with an oscilloscope while printing, but",
... |
[
"filament is too short for the extruder to push will",
"for the extruder to push will there be a stop",
"in printing on the Ender 3, meaning that I should",
"too short for the extruder to push will there be",
"is too short for the extruder to push will there",
"be a stop in printing on the Ender 3, meanin... |
[
"printed with concrete cement what replaces the steel rebar for",
"by layer. The ground is literally the printer’s build plate.",
"(very) simply, paste extrusion is similar using a piping bag",
"paste extrusion is similar using a piping bag to spread",
"molded, the bricks are then piled atop each other manu... |
[
"information on chemical resistances of PLA, just vague claims that",
"find any good information on chemical resistances of PLA, just",
"that it depends on additives (likely true, but it would",
"good information on chemical resistances of PLA, just vague claims",
"it's biodegradable\" or that it depends on... |
[
"know how to choose one which is compatible with this",
"0.4 mm nozzle and I'd like to buy a better",
"better one but I don't know how to choose one",
"new nozzle for my Anycubic i3 Mega because it's not",
"don't know how to choose one which is compatible with",
"which is compatible with this printer. If ... |
[
"with pores](https://i.stack.imgur.com/Rk9Lp.jpg \"Outer wall with pores\")](https://i.stack.imgur.com/Rk9Lp.jpg \"Outer wall with pores\")",
"those pores. I assume those pores are dragged by the",
"moves inwards to print the infill. I already tried to",
"image of those pores. I assume those pores are dragged... |
[
"the infill. I tried adjusting the `infill overlap` parameter in",
"box](https://i.stack.imgur.com/G97AW.jpg \"Visible separation on perimeter of the inner box\")](https://i.stack.imgur.com/G97AW.jpg \"Visible",
"inner box\")](https://i.stack.imgur.com/G97AW.jpg \"Visible separation on perimeter of the inner bo... |
[
"the use of an extruder port on a 3D printer",
"motors (on y axis) on a 3D printer? This is",
"is cut. [![Diagram](https://i.stack.imgur.com/l40X1.png \"Diagram\")](https://i.stack.imgur.com/l40X1.png \"Diagram\") The mother board we are",
"axis) on a 3D printer? This is for a school",
"converting a 3D prin... |
[
"\"Graph of heatbed and hotend temperature over time\")](https://i.stack.imgur.com/KlD2K.png \"Graph of",
"is a defunct sensor (it is in both sensors) and",
"this? I do not think that it is a defunct",
"it is real. Could this pose some sort of hazard",
"is real. Could this pose some sort of hazard as",
"h... |
[
"did not go so well: [](https://i.stack.imgur.com/kDVQa.jpg) [](https://i.stack.imgur.com/Vp0Pk.j... |
[
"w/ PEI heatbed * Custom enclosure * Slic3r software *",
"trying to set up an enclosed (custom enclosure) Prosi i3",
"ABS, but having a fair amount of difficulty preventing the",
"first layer, 110 °C for others * Fan on for",
"Thus far I have been unable to prevent parts from",
"extent with Benchy, it sho... |
[
"name the problem and suggest the most likely solution?** Printer",
"settings. * I don't understand many of the extrusion width",
"* I'm not sure I should change the temperature settings.",
"the bottom layer and in layers that are the first",
"OP has already tried a lot. My thoughts so far:",
"a large are... |
[
"a blue polyester sticker. When I print small holes (1",
"actual outer edges, the holes have no brim and the",
"four holes in different locations do the same. First layer",
"SketchUp, and Slic3r. The heated bed is covered with a",
"small holes (1 to 1.5 mm radius), slicer software considers",
"could print... |
[
"or physical perspective, how does acetone affect the PEI surface?",
"base](https://help.prusa3d.com/article/6Gtws6Yqjg-pei-print-surface-preparation) mentions that acetone will \"rejuvenate\" PEI in addition to",
"However, if you use acetone every day, PEI will become",
"start cracking. > > > From a chemical... |
[
"isn't necessarily about what type of plastic or whatever we",
"detail I'm looking for, come up a bit short. They",
"I work in a teaching hospital and we have a",
"so: > > We'd like to print a tube that's",
"my lab, a UPrint Se and a Prusa i3 Mk3s.",
"[![Tube containing micro tubes](https://i.stack.imgur.... |
[
"effort to get it to stick for an initial layer,",
"°C for the PLA and 70 °C for the bed",
"sit after cleaning before using? Is it just a matter",
"70 °C for the bed in an effort to get",
"but I haven't actually been able to complete a print.",
"with rubbing alcohol, but I don't know if there's any",
"t... |
[
"\"Marlin splash screen\") [![Screen corruption](https://i.stack.imgur.com/IIkog.jpg \"Screen corruption\")](https://i.stack.imgur.com/IIkog.jpg \"Screen corruption\") The",
"file? I verified that the two buses between the screen",
"Tronxy X5S-400, I assembled it and when I power it",
"see on the screen one o... |
[
"a benchy. Both of these came out with a sort",
"print came out okay so I printed a 20 mm",
"causing this so some advice would be appreciated. I'm using",
"advice would be appreciated. I'm using Ultimaker Cura 4.0.0 and",
"the leveling procedure and I think the level test print",
"level test print came ou... |
[
"straight lines, my printhead \"vibrates\" instead of having a smooth",
"with a lot of small straight lines, my printhead \"vibrates\"",
"time before trying to move again. On longer travels there",
"with different model](https://3dprinting.stackexchange.com/questions/8735/replace-x-axis-motor-with-different-m... |
[
"be wrong? The printer is a slightly modified Prusa i3",
"edges of a solid 2 mm for a 85 mm",
"on the external edges of a solid 2 mm for",
"by a regular heated bed at 65 °C. However, my",
"to keep the warmth inside the printing area. The nozzle",
"piece is the scroll.stl, but it applies on every big",
"... |
[
"Approach Sensor Switch Detector NPN NO DC 6-36V 300mA 3-Wire",
"Development Board Module\")](https://i.stack.imgur.com/VL6Ix.jpg \"NOYITO Optocoupler Isolation MOS FET 10A DC",
"2.7-27V High-Power Field Effect Tube Driver Module 0-20Khz PWM Switch",
"Development Board Module\") [![uxcell 4mm Inductive Proxim... |
[
"mm), which has hexagonal holes on the corners. On the",
"oozing and the hole borders being underextruded (sometimes to the",
"casing (~180 mm x 100 mm), which has hexagonal holes",
"whole bed width), what results in filament oozing and the",
"* Bed temperature 60 °C * Retraction on travel turned",
"(I gu... |
[
"the glue gun tip to the hot glue wouldn’t work,",
"glue to bond the halves and on one model, the",
"came together slightly skewed. Is there any way to ‘unbond’",
"skewed. Is there any way to ‘unbond’ the hot glue",
"Touching the glue gun tip to the hot glue wouldn’t",
"the pieces? Touching the glue gun t... |