ngram listlengths 0 10.5k |
|---|
[
"and it came with A4988 driver chips. But I can't figure out which",
"board. But I don't see anything that matches. Suggestions? [![Rear of A4988 breakout",
"a new MKS 1.4 controller board and it came with A4988 driver chips.",
"chips. But I can't figure out which way they install. I found something",
"some... |
[
"is thicker most of the way across, but suddenly changes to thin. [![Cross",
"first print, I clearly had a low value for horizontal shells, top and",
"sloped sides are pretty much the same - this is why I'm thinking",
"two bad prints with a hacksaw to see a cross-section. The bottom is",
"on the outer infil... |
[
"Tronxy P802M (very similar to the Anet A8, but using a Melzi2.0V5 board)",
"my Simplify3D on Windows 10, I get the following: ``` [...] Connected to",
"A8, but using a Melzi2.0V5 board) that seems to work fine (I just",
"but using a Melzi2.0V5 board) that seems to work fine (I just finished",
"machine! SEN... |
[
"Christmas. The sample .gcode files that came with the printer generally print great",
"Cura (Normal Quality, High Quality, etc). Is there something I'm missing that I",
"relocated to some other part of the print. If I use full grid",
"Is there something I'm missing that I can do to improve the quality",
"o... |
[
"filament have on final print quality, and why? Does it vary between different",
"in the meantime, I want to ask the general question. What impact does",
"impact does dimensional accuracy of filament have on final print quality, and why?",
"this answer](https://3dprinting.stackexchange.com/a/2820/5782) user [... |
[
"Slic3er (v1.2.9 running on OS X), and it's reporting \"Manifold: auto-repaired (11430 errors)\",",
"the head, so I don't think it's just a screen rendering issue. But",
"is fine. I wanted to print using Slic3r and compare the results. Is",
"the resulting GCode. So I believe the model is fine. I wanted to",
... |
[
"a Wanhao Duplicator i3 v2 (A.K.A. Maker Select, Cocoon Create). My extruder got",
"that the clog is at the heater block level. This is a what",
"lot of clogged nozzle issues with the [cold pull method](https://printrbot.zendesk.com/hc/en-us/articles/202100554-How-to-Unclog-the-Hotend-The-Cold-Pull), it always ... |
[
"printing websites that 24 V systems are safer, compared to 12 V systems.",
"go a bit over fairly comfortably. A 24 V power supply can't without",
"comfortably. A 24 V power supply can't without partially going over the rating.",
"to build a printer designed with safety as a main priority, what voltage",
"t... |
[
"large array should secure the material appropriately for a desktop printer. > >",
"peel chunks of the expensive Buildtak off. Magnetic sheets have different strengths proportional",
"It's hard to find the stronger pulls, 0.045 mm and 0.06 mm which",
"tbm0115: > > I don't think you need that much magnetic pul... |
[
"make contact with PCB boards. The print will be most likely to be",
"don't want to fry the PCB board so I want to know if",
"want to fry the PCB board so I want to know if 3D",
"most likely to be in PLA. I don't want to fry the PCB",
"non-conductive PLA and conductive PLA. But what about the conductivity o... |
[
"First question, what kind of printing settings should I use? Should I go",
"a Taulman T-Glase clear 1.75 mm filament and I have XTC-3D. You can",
"this interesting page, [Hacking t-glase to look more like glass!](http://taulman3d.com/t-glase-optics.html) First question, what",
"You can read this interesting ... |
[
"when I tell it to extrude a millimeter, it no longer extrudes a",
"went in. Cleaning the hotend has done nothing, cleaning the extruder has done",
"had fused to what it was printing after remaining on all night -",
"this is what is supposed to happen, it was broken the whole time,",
"time to remove. Prints... |
[
"quite well. Is there any way I can still make use the 3",
"far it is pulling in 1.75 mm quite well. Is there any way",
"noob mistake of buying 3 mm filaments instead of 1.75 mm. I have",
"and so far it is pulling in 1.75 mm quite well. Is there",
"is pulling in 1.75 mm quite well. Is there any way I can",
... |
[
"3D print a boat hull (small dimensions, maybe something like 60x40x20 cm). I",
"several months, maybe more, about a year or two). **Is there any easily",
"salty water, UV rays, extreme temperatures (under the sun or in a cold",
"material should be able to resist some chocs and maybe a little bit",
"be feas... |
[
"the *y*-axis plate and the printhead in the *x*-axis carriage. However, there seems",
"or can it? Is *cost* a factor? A pinion seems to cost around",
"not required on an everyday basis, but the tension would still need to",
"made from aluminium, surely *weight* can not be a major factor... or can",
"BKK, T... |
[
"spray. The only way for me to combat this is gluing the base",
"keep suffering from warping when printing with PLA. Whenever I print something with",
"print something with a base at about 10 cm x 10 cm, at",
"dysfunctional to my prints. Is there a reliable way to stop this warping",
"when printing with PLA... |
[
"what I am permitted to do with SketchUp Make in order to do",
"be much simpler. However I do not expect to generate anywhere near the",
"work only. This includes the output from the software. > > Trimble Navigation",
"2016-02-07. The full [SketchUp Make license](https://web.archive.org/web/20181005195026/htt... |
[
"single print. I read in the internet that I cannot print over 45°...",
"vertical arcs](https://i.stack.imgur.com/wNnOf.png)](https://i.stack.imgur.com/wNnOf.png) I suppose I can print my things without supports because from",
"The red line, instead, shows a case where the angle, starting from a",
"some arcs ... |
[
"PINDA probe slightly lower > and re-run the X/Y calibration. > 2. **XYZ",
"which it failed to detect. Please verify, that the printer is assembled correctly,",
"Bed calibration point was not found.** > > Calibration routine did not find",
"feel a friction of the nozzle against the sheet > of paper and",
"p... |
[
"I tried changing temperatures 190-220, tried to change the flow rate. Also checked",
"filament from <https://makeblock.lt>  What I tried ------------ I tried changing temperatures 190-220,",
"temperatures 190-220, tried to change the flow rate. Also checked i... |
[
"toy with some broken parts, an Executivity Gear Master. I don't think it's",
"part, rather like getting a spare key cut from a pre-existing key being",
"a quick way to do that from the part itself?) Or is there",
"3D drawings file, just a few of the unbroken parts. What's the best",
"parts. We don't have C... |
[
"What could've caused them? I am sure I set the filament diameter correctly.",
"it: [](https://i.stack.imgur.com/ysVvW.jpg) As you can see, nasty gaps",
"of Nuka-Cola bottle opener](https://i.stack.imgur.com/ysVvW.jpg)](https://i.stack.i... |
[
"started bubbling on that, so I switched to tape and that worked once",
"i3 printer and just recently I have been having problems with the first",
"it happened again. What else can I do to get the first layer",
"what it looks like. [](htt... |
[
"X-31.496 Y-27.307 E3.72646 G1 X-30.350 Y-29.347 E3.87420 G1 X-28.588 Y-30.886 E4.02194 G1 X-26.413",
"mm perimeters: 3 solid layers top:3 bottom :3 [Here](http://pastebin.com/YW05y3ze) is the full G-code",
"E7.71211 F1800.000 G1 X30.885 Y-28.589 E7.85985 G1 X31.746 Y-26.414 E8.00759 G1 X31.893 Y-25.001",
"co... |
[
"fact that it does dissolve PLA does not really at all mean that",
"it does dissolve PLA does not really at all mean that it will",
"median lethal dose (LD50) comparable to that for acetone. > > > Wikipedia",
"at hand is now of practical nature: * Is Tetrahudrofuran actually viable replacement",
"for aceton... |
[
"not the back side. What might cause this goo - is the bearing",
"linear bearings as well, Z axis with lead screws. After about 2 kg",
"is leaving an almost black residue at the front of the axis. I",
"the bearings before mounting them and repeated that after about 1 kg of",
"moving as Y axis on three linea... |
[
"the paper didn't come off the plastic very well. It didn't matter for",
"which non-sticky surface would you recommend? Is there any way to use transparent",
"it on plain paper and of course the paper didn't come off the",
"that specific case, but if I want to print something else, which non-sticky",
"I pri... |
[
"trying out all of the usable ones). For example, when trying out 9600,",
"my FlashForge Creator Pro (2014 edition) Everything seemed to be going smoothly until",
"(after being trying out all of the usable ones). For example, when trying",
"� > > > What should I do to fix the problem? ---",
"up a usable Bau... |
[
"issue? G-code from one of the 2 files ``` M190 S50.000000 M109 S200.000000",
"SD card, the printer buries the hot end in the heat bed. What",
"hot end in the heat bed. What needs to be adjusted to fix",
";Print time: 3 hours 47 minutes ;Filament used: 11.435m 34.0g ;Filament cost: None",
"properly when you... |
[
"can in the courtyard. However if I throw PLA in there and it",
"intending to use the soil for their balcony flowers. So can I really",
"know how much biodegradable. I live in a flat and we have composting",
"PLA in there and it does not decompose, neighbors are gonna be pissed",
"and we have composting tra... |
[
"on that shape if need be. --- I am using a MakerBot Replicator+",
"so take this into consideration if it affects your answer, and if you",
"into consideration if it affects your answer, and if you believe a different",
"focus on that shape if need be. --- I am using a MakerBot",
"imperfections be negligibl... |
[
"for cutting the part. [![Cross Section where I split the part](https://i.stack.imgur.com/L2hhV.png \"Cut Cross",
"attach/snap it together. The wall thickness is currently 3mm. [![Cut Plane](https://i.stack.imgur.com/FFckZ.png \"Cut Plane\")](https://i.stack.imgur.com/FFckZ.png",
"need to print it in two parts ... |
[
"some of the print settings are listed below: * Slicer: Slic3r * [First]",
"extrusion width: Slic3r chosen * Print temperature: 220°C I've noticed in the Slic3r",
"job produces smooth sidewalls for most of the part but at a certain",
"Fill pattern: Rectilinear * Top/Bottom Fill pattern: Concentric * Perimeter... |
[
"scale an existing mesh without changing the thickness of the walls? I am",
"want to print in 1/160 the printing may fail because the wall thickness",
"the wall thickness falls below the minimum the printer will support. Any ideas?",
"in 1/160 the printing may fail because the wall thickness falls below the",... |
[
"an older DVD player broke. I always read about being 3D printing a",
"a layman should take to get the gear piece replaced using 3D printing?",
"looked for a template to give to some printing service, but I found",
"gear of an older DVD player broke. I always read about being 3D",
"I found none (and nothing... |
[
"fall off but that didn't work. I am printing at 185°C and the",
"been trying to print an object that is 4 inches tall. About at",
"am printing at 185°C and the bed is 55°C. I am using PLA",
"Should I increase the temperature of the bed or is there something else",
"bed when it was mid way through so that i... |
[
"instead of a line in larger objects), does the infill strengthen the object",
"means 'weaker' shape (i.e. a triangle is stronger than a square), so how",
"a single dot as the infill (a dot instead of a line in",
"new to 3d printing, and wanted to get a few things understood. Firstly,",
"few places that hex... |
[
"that leaves two related questions for me: Is there some simple way to",
"positions) easily? Does something like that already exist? If not, I wonder why.",
"to 0, which is quite inconvenient, unless I have a PC nearby that",
"home XYZ to endstops, but it also moved the head to position (0,",
"Then I could ... |
[
"laying down the first layer of the raft, I can see it looks",
"raft, I can see it looks like it \"beads\" in some places. Thin",
"be horribly laminated at a certain \"height\" of the print. This is really",
"at a certain \"height\" of the print. This is really strange as it",
"tried: Different filament Pus... |
[
"of the same print could save me significant amount of time in a",
"excluding minor wastage such as setup time, post-processing time, etc. [](https://i.stack.imgur.com/x6vXw.jpg... |
[
"commands to use to switch nozzles. Sometimes I can get the nozzles to",
"and I am having trouble understand what commands to use to switch nozzles.",
"to switch nozzles. Sometimes I can get the nozzles to switch and it",
"to switch and it doesn't recenter but sometimes it does. I have been",
"a Malyan M180... |
[
"extended to food printers to make, for example, a sugar or chocolate telescoping",
"watched some YouTube videos where the crafters make items with hinges. That in",
"crafters make items with hinges. That in itself blows my mind. It is",
"is hard to grasp how something with moving parts can be printed. But",
... |
[
"any kind of encoder on the motor and so I cannot know the",
"a 3D printer, since neither 3d printers have encoder on the motor. Where",
"motor and so I cannot know the position of the axes. I thought",
"to a 3D printer, since neither 3d printers have encoder on the motor.",
"position of the axes. I thought... |
[
"but every example I have seen where someone uses hairspray, they use it",
"use it on a glass bed. Is it okay to use it on",
"on a glass bed. Is it okay to use it on a metal",
"seen where someone uses hairspray, they use it on a glass bed. Is",
"I have seen where someone uses hairspray, they use it on a gla... |
[
"there any 3D printers that work like pick and place machines and just",
"of any 3D printers that work by assembling models from parts instead of",
"the model but none of these seem to do pick and place as",
"can do conductive filament in the model but none of these seem to",
"and place as well and they sti... |
[
"there is nothing underneath? Will I need to check the \"Support\" function in",
"and right now i am printing a normal cube just to try it",
"the print-settings before hand or is there something else i need to do?",
"print-settings before hand or is there something else i need to do? Thanks",
"printing wher... |
[
"a post processing method for increasing the functional strength of a 3d printed",
"my part with solid infill but the layer separation is still the primary",
"open to any possible ideas or advice if someone has tried something like",
"for a post processing method for increasing the functional strength of a 3d... |
[
"know whether they are ABS or PLA. I got the plastic with the",
"two. Any other ways without having to burn and smell plastic? I just",
"v2). I set my extruder to 210 °C and bed to 50 °C",
"from Solidoodle (who have gone out of business) when I bought the Solidoodle",
"unprofessional filament. The plastic f... |
[
"\"split object into parts\" but I can't find that in cura 2.4. Did",
"that I want to split up. Cura 15 had an option to \"split",
"to \"split object into parts\" but I can't find that in cura 2.4.",
"with multiple parts that I want to split up. Cura 15 had an",
"up. Cura 15 had an option to \"split object ... |
[
"and it is asked so many times within the 3D printing and maker",
"on the side of caution and steer clear of things like this but",
"Can this be covered under Fair Use? Since there is nothing to be",
"use outlined by the owner of the original work? For instance, if someone",
"it wasn't very much different t... |
[
"STL file and I would like to know how many grams would this",
"many grams would this print consume. Is there a software so I can",
"have an STL file and I would like to know how many grams",
"an STL file and I would like to know how many grams would",
"this print consume. Is there a software so I can get i... |
[
"* X3 (metal frame) style. As far as I can see, both printers",
"both printers have the same basic resolution, accuracy, and material specs. 1. What",
"1. What are the advantages/disadvantages/differences between the P802 and X3? 2. How important",
"P802 (reprap frame) style * X3 (metal frame) style. As far a... |
[
"Windows 10. The spec sheet for the printers does not list anything above",
"a TronXY X3 or P802; but, my PC is running Windows 10. The",
"10. The spec sheet for the printers does not list anything above Windows",
"not list anything above Windows 7. Is anyone using either of these printers",
"to purchase a ... |
[
"precision of the printing good enough that the inserts can be expected to",
"below (the colorful containers with slots for tubes). These fit into the buckets",
"under the stress? Additionally, is the precision of the printing good enough that",
"the upper left corner holding the bottles. Examples of inserts ... |
[
"printer, like the Ultimaker3 extended? I'm looking for a safe solution, to use",
"there a commercially available fume and nano particle extractor for a 3D printer,",
"commercially available fume and nano particle extractor for a 3D printer, like the",
"a commercially available fume and nano particle extracto... |
[
"to home (the wires blocked the movement). Since then, the error appeared. I",
"Prusa i3 **Software:** MatterHackers: MatterControl 1.7 **Update:** The bed temperature is stuck at",
"the bed and the extruder; I can extrude filament; it is just the",
"the error which doesn't let me print. **Printer:** Anet A8 ... |
[
"off easier, the first layer is very uneven and it takes 5-6 layers",
"much force that I already have damaged the BuildTak in one or two",
"have damaged the BuildTak in one or two places. If I lower the",
"- especially to lower it in a controlled manner without changing the nozzle",
"a 0.3 mm nozzle, but I ... |
[
"cost competitive with other technologies. I just accepted this to be truth, and",
"and other marketplaces the same thing. Now I'm creating an item for resale",
"need 40 - 50 cases at a time I thought I would shop",
"the same part myself costs $7 in filament, and paying someone else to",
"cost of tooling pl... |
[
"software but can't find a combination that will acomplish my goal. I'm looking",
"of the part that I know do need them. Perhaps there is an",
"like this, or is best practice to modify the part to have weak",
"part however the rest of the part needs to have support. I've played",
"degree angle (15 degrees o... |
[
"fine. I can't find anything in Marlin to adjust for this and I'm",
"``` I also wanted to test whether the nozzle is actually moving closer.",
"most everything calibrated and working with one exception. I tell the printer to",
"Y0.00 Z0.00 Recv: echo:Material heatup parameters: Recv: echo: M145 S0 H180 B70 F2... |
[
"STL file with Google Sketchup. Do you guys know any good matching gears",
"a good set of gears (with 5, 10, 15... teeth for example) so",
"use this STL file with Google Sketchup. Do you guys know any good",
"days trying to make the best gears I could but they are not",
"\"gear\" but I see no set of gears. ... |
[
"see, so I'm attaching two pictures instead: [](https://i.stack.imgur.com/4A8Gn.jpg) [](https://i.stack.imgur.com/4A8Gn.j... |
[
"symmetric at the bottom but not at the top. Checkout the photo below:",
"to the right hand side - it is symmetric at the bottom but",
"problem with my 3D print. Whenever I am printing any object, the print",
"facing a problem with my 3D print. Whenever I am printing any object,",
"am facing a problem with ... |
[
"I know very much about them, but I'm thinking of buying a delta",
"3D printer kit for around $450. When I looked online of some disadvantages",
"I found that they typically don't have Bowden extruders. I'm wondering what are",
"a Bowden extruder and should I spend more money in a 3D printer",
"of buying a ... |
[
"Printer has a Heater + Heater transfer plate (aluminium) + Glass? I wonder",
"plate (aluminium) + Glass? I wonder why a glass plate, and if is",
"the aluminium plate adjusting the heating. [Link to the ultimaker](https://ultimaker.com/en/products/ultimaker-3). Pictures: [![Ultimaker view](https://i.stack.imgur... |
[
"for quicker movement of the carriage on it's associated axis(one of X,Y). Would",
"each direction) to manage reversing the filament pressure or would it be better",
"a flex-shaft type connector from the motor to the extruder assembly to actually",
"The motivation for this change is to reduce the overall weig... |
[
"place then you would be (to within the constraints of the backlash compensation).",
"constraints of the backlash compensation). Because of this, I was wondering if there",
"told me that he despised stepper motor systems, as every stepper based system",
"as every stepper based system he had worked on required... |
[
"it, less then that will be annoying, longer will be better. So, under",
"in the winter. I only have PLA, ABS and PETG available, anything else",
"using the normal means but I can print clips that will hold the",
"better. So, under those conditions, which of the 3 materials is more durable?",
"30C) with a l... |
[
"The overall goal is to create a print of the liberty bell. No",
"nothing to rotate. So on to the question. **Is there any tool or",
"of Google-fu I found this image. It has been cleaned up and cropped",
"to the question. **Is there any tool or technique to turn the image",
"the bell. After an application o... |
[
"(H2O2), separately and in combination. The pH of the solutions are in the",
"of the solutions are in the range 0 to 7. Temperatures don't exceed",
"don't exceed 40° Celsius. In another application we have aqueous solutions containing high",
"to 7. Temperatures don't exceed 40° Celsius. In another application... |
[
"with quality of all the surfaces and the general precision of the parts",
"hole from top to bottom (to fit a screw) after I print it",
"cant the slicer software (I am using s3d) know that it is using",
"for that in order to get the diamter right? OBS: this printer is",
"x 10mm x 10mm cube with a 2.8mm diam... |
[
"pink is..? If the pink color is some kind of warning, how do",
"preview mean? Yellow is my model, green is support, and pink is..? If",
"Yellow is my model, green is support, and pink is..? If the pink",
"pink color in Slic3r preview mean? Yellow is my model, green is support,",
"What does the pink color i... |
[
"does not go through. I have searched everywhere online and have found nothing.",
"the filament through the nozzle it does not go through. I have searched",
"I try putting the filament through the nozzle it does not go through.",
"nozzle it does not go through. I have searched everywhere online and have",
"... |
[
"see temperatures above 100C. Edit 2: Based on the link in the comments",
"flexible enough to allow the cap to be seated without breaking - it",
"arms. Is there a rule of thumb or general guideline for this type",
"\"neck\" at the bottom of the capacitor to provide some positive lock. 220",
"the \"neck\" at... |
[
"a holder that grabs the outer edge of the gauge. [![enter image description",
"an M2.5 nut though, only about 1mm. Edit: I'll add an image of",
"with tapping a screw thread into the print itself so I want to",
"a major pain because, while a nut can be captive in a hex",
"gauge is one of a set pulled out of... |
[
"had this idea for bulky parts for just printing the shell (PLA) then",
"for just printing the shell (PLA) then pouring in some kind of filler",
"some kind of filler in to make up the bulk/strength. Printing bulk .2mm",
"in to make up the bulk/strength. Printing bulk .2mm at a time line",
"- has this been d... |
[
"up, a small bit of filament is coming out of the nozzle, forming",
"of filament is coming out of the nozzle, forming a small string at.",
"out of the nozzle, forming a small string at. When the printing starts,",
"a small plastic ball on the bed, impacting the overall printing process. How",
"filament is c... |
[
"to keep all the form's details. If it is possible, what printer do",
"like that in terms of ink? And what is the most permissive software",
"3D form#1\")](https://i.stack.imgur.com/Yd8Cl.png \"Detailed 3D form#1\") [![Detailed 3D form#2](https://i.stack.imgur.com/qV4Np.png \"Detailed 3D form#2\")](https://i.st... |
[
"are the \"magic numbers\" people refer to regarding print resolution on the Monoprice",
"\"magic numbers\" people refer to regarding print resolution on the Monoprice Select Mini?",
"What are the \"magic numbers\" people refer to regarding print resolution on the",
"the \"magic numbers\" people refer to rega... |
[
"this matter however I cannot find any clear answers. How does a SolidWorks",
"I've done *some* research on this matter however I cannot find any clear",
"does a SolidWorks CAD file get 'converted' into a file format suitable for",
"on this matter however I cannot find any clear answers. How does a",
"Solid... |
[
"how I can fix it? I'm using Slic3r. [![Photograph of first printed layer](https://i.stack.imgur.com/XD4AX.jpg",
"layer of my support structures isn't sticking on the edges and causing the",
"an issue where the first layer of my support structures isn't sticking on",
"first layer of my support structures isn'... |
[
"prevents us from removing the support material without damaging the piece. We don't",
"[poppy-project.org](https://www.poppy-project.org/fr/). We are printing it with a double extruder SpiderBot with PLA and",
"extruder SpiderBot with PLA and HIPS as support material. Our principal issue is",
"are printing i... |
[
"and then press \"`Print File`\" and select, then it starts for a second,",
"built my Anet A8 and it won't print. I will preheat it (190°C",
"is already preheated - it is coming out of the nozzle. Any help",
"Anet A8 and it won't print. I will preheat it (190°C 60°C) and",
"preheated - it is coming out of t... |
[
"stepper is OK. There is any simple solution to remap the output pins?",
"output for X is not working. The stepper is OK. There is any",
"OK. There is any simple solution to remap the output pins? I want",
"to remap the output pins? I want the E1 output to act as",
"up my electronics and now the output for ... |
[
"there any system to print on a 3D object (e.g. ink jet). I",
"Black in the first instance, but color would be nice for future projects.",
"print on a 3D object (e.g. ink jet). I need at least 300dpi.",
"I have a 3D printed object that I'd like to print on. Adhesive",
"least 300dpi. Black in the first insta... |
[
"that I have the basic configured correctly. What motherboard ID in [`configuration.h`](https://github.com/MarlinFirmware/Marlin/blob/1.1.x/Marlin/Configuration.h) is",
"my new printer, and I just want to make sure that I have",
"the basic configured correctly. What motherboard ID in [`configuration.h`](https:/... |
[
"[One supplier](http://www.ebay.co.uk/itm/252871697915) supplies all of the parts printed in ABS, whereas [another supplier](http://www.ebay.co.uk/itm/182099145671)",
"am surely missing something, as both the second supplier, *and* MJRice, use PLA.",
"precise prints and better aesthetic quality, as well as more... |
[
"the LED on the bed turns on and it starts heating up. The",
"The manual control in Repetier Host doesn't turn if off or on and",
"After I updated the firmware on my Prusa i3, the Bed won't switch",
"S0` as well as `M0`, but it does not switch it off. **Edit:**",
"up my printer, the LED on the bed turns on ... |
[
"and doesn't fully connect to the printer. I've tried changing the baud rate",
"that is all it does and doesn't fully connect to the printer. I've",
"says ``` connecting... ``` and that is all it does and doesn't fully",
"Plus I have to upload data to the 3D printer from a software",
"open Pronterface and p... |
[
"I am using 1.75 mm cheap PLA bought from eBay and have also",
"am using 1.75 mm cheap PLA bought from eBay and have also had",
"eBay and have also had problems of filament oozing out of the print",
"and have also had problems of filament oozing out of the print block.",
"oozing out of the print block. ](https://i.stack.imgur.com/zdPaw.jpg) I've also made other tests, but the result",
"cube. The slicer is Cura and is set for a 1.75 mm filament",
"I stopped the printer after a minute, when I noticed that the filament",
"is set for a 1.7... |
[
"power on/off power supply. Is there a G-code to know the actual state",
"`M81` G-codes to power on/off power supply. Is there a G-code to know",
"supply. Is there a G-code to know the actual state of the power",
"G-codes to power on/off power supply. Is there a G-code to know the",
"using `M80` and `M81` G... |
[
"heat but still have enough room to put the thermistor into the block?",
"wires from heat but still have enough room to put the thermistor into",
"have had many problems with my heat shrink for the thermostat on my",
"many problems with my heat shrink for the thermostat on my Anet A8",
"can insulate my wire... |
[
"four times as hard, than when using 8 mm, in order to raise",
"2 mm, if there is only one *start* to the screw then the",
"is only one *start* to the screw then the lead is the same",
"the pitch. However, if there are four *starts* to the screw, then the",
"--- ### Footnote 1 Nomenclature: * **Pitch** is t... |