Daily Papers

Since Volta introduced Independent Thread Scheduling (ITS), NVIDIA GPUs have been widely assumed to handle warp divergence in a fixed manner. We test this assumption across Ampere, Hopper, and datacenter and consumer Blackwell GPUs, using pre-ITS Pascal as a baseline. Combining cycle-accurate microbenchmarks, hardware counters, and static analysis of compiler-generated SASS, we separate stable behavior from architectural change. Across all tested generations, divergent paths serialize linearly with the number of paths k, following T(k) approx sk with no super-linear reconvergence penalty. Warp execution efficiency falls as 32/k, the penalty is independent of occupancy, and predication removes the serialization cost. The same behavior appears on Pascal, showing that this programmer-visible cost model predates ITS. The compiler-emitted reconvergence machinery, however, has changed substantially. Pascal uses a per-warp SSY/SYNC instruction stack, whereas later generations use barrier-register instructions. Deferred reconvergence beyond the immediate post-dominator falls from 29 cases on Ampere to 2 on Blackwell. Blackwell also introduces a two-tier convergence-barrier classification, uniform-branch instructions, and explicit partial-mask warp synchronization, none of which appear on Ampere or Hopper. Controlled bit-flip experiments indicate that the new barrier class is a static compiler classification with no observable runtime effect in our tests. Thus, divergence retains a stable and predictable performance cost even as NVIDIA's control-flow ISA and reconvergence mechanisms continue to evolve.

GPU Confidential Computing (GPU-CC) now preserves GPU-local performance: on NVIDIA B300, BF16 matmul runs at 0.998x of non-confidential performance. Yet LLM serving under Intel TDX plus GPU-CC still loses 13-27% of throughput, and KV-cache restore latency can more than double. This paper studies that gap on two Blackwell platforms, RTX Pro 6000 and B300 HGX, and identifies its dominant cause: the confidential VM-GPU bridge, not GPU compute. We find that GPU-CC turns host/device movement into a serialized, high-setup-cost channel. Secure copies do not gain CUDA-stream concurrency within a context, asynchronous transfers block at the runtime boundary, and small crossings pay a fixed toll. This violates the assumptions of modern inference runtimes, where DMA is expected to be cheap, concurrent, and asynchronous. In vLLM dense decode, the gap closes around 44x-slower small alloc-and-copy operations; targeted patches reject alternative explanations. A scheduling flag recovers 57% of the gap, while a worker-thread drain recovers up to 92% in qualified high-concurrency runs. The same bridge model explains a +131% KV-restore penalty and a 34x model-load slowdown. Blackwell also changes the confidential tenancy unit. We qualify confidential multi-GPU NVSwitch tenants on B300, including 510 GB/s NVLink P2P inside a CVM and concurrent isolated tenants, and identify the remaining fabric-attestation gap for production confidential AI platforms.

Despite transformative advances in generative motion synthesis, real-time interactive motion control remains dominated by traditional techniques. In this work, we identify two key challenges in bridging research and production: 1) Real-time scalability: Industry applications demand real-time generation of a vast repertoire of motion skills, while generative methods exhibit significant degradation in quality and scalability under real-time computation constraints, and 2) Integration: Industry applications demand fine-grained multi-modal control involving velocity commands, style selection, and precise keyframes, a need largely unmet by existing text- or tag-driven models. To overcome these limitations, we introduce MotionBricks: a large-scale, real-time generative framework with a two-fold solution. First, we propose a large-scale modular latent generative backbone tailored for robust real-time motion generation, effectively modeling a dataset of over 350,000 motion clips with a single model. Second, we introduce smart primitives that provide a unified, robust, and intuitive interface for authoring both navigation and object interaction. Applications can be designed in a plug-and-play manner like assembling bricks without expert animation knowledge. Quantitatively, we show that MotionBricks produces state-of-the-art motion quality on open-source and proprietary datasets of various scales, while also achieving a real-time throughput of 15,000 FPS with 2ms latency. We demonstrate the flexibility and robustness of MotionBricks in a complete production-level animation demo, covering navigation and object-scene interaction across various styles with a unified model. To showcase our framework's application beyond animation, we deploy MotionBricks on the Unitree G1 humanoid robot to demonstrate its flexibility and generalization for real-time robotic control.

Quantum error correction provides a path to reach practical quantum computing by combining multiple physical qubits into a logical qubit, where the logical error rate is suppressed exponentially as more qubits are added. However, this exponential suppression only occurs if the physical error rate is below a critical threshold. In this work, we present two surface code memories operating below this threshold: a distance-7 code and a distance-5 code integrated with a real-time decoder. The logical error rate of our larger quantum memory is suppressed by a factor of Λ = 2.14 pm 0.02 when increasing the code distance by two, culminating in a 101-qubit distance-7 code with 0.143% pm 0.003% error per cycle of error correction. This logical memory is also beyond break-even, exceeding its best physical qubit's lifetime by a factor of 2.4 pm 0.3. We maintain below-threshold performance when decoding in real time, achieving an average decoder latency of 63 μs at distance-5 up to a million cycles, with a cycle time of 1.1 μs. To probe the limits of our error-correction performance, we run repetition codes up to distance-29 and find that logical performance is limited by rare correlated error events occurring approximately once every hour, or 3 times 10^9 cycles. Our results present device performance that, if scaled, could realize the operational requirements of large scale fault-tolerant quantum algorithms.

This work studies a central extremal graph theory problem inspired by a 1975 conjecture of Erdos, which aims to find graphs with a given size (number of nodes) that maximize the number of edges without having 3- or 4-cycles. We formulate this problem as a sequential decision-making problem and compare AlphaZero, a neural network-guided tree search, with tabu search, a heuristic local search method. Using either method, by introducing a curriculum -- jump-starting the search for larger graphs using good graphs found at smaller sizes -- we improve the state-of-the-art lower bounds for several sizes. We also propose a flexible graph-generation environment and a permutation-invariant network architecture for learning to search in the space of graphs.

We present LongLive-2.0, an NVFP4-based parallel infrastructure throughout the full training and inference workflow of long video generation, addressing speed and memory bottlenecks. For training, we introduce sequence-parallel autoregressive (AR) training, instantiated as Balanced SP, which co-designs the efficient teacher-forcing layout with SP execution by pairing clean-history and noisy-target temporal chunks on each rank, enabling a natural teacher-forcing mask with SP-aware chunked VAE encoding. Combined with NVFP4 precision, it reduces GPU memory cost and accelerates GEMM computation during training, the proportion of which increases as video length grows. Moreover, we show that a high-quality infrastructure and dataset enable a remarkably clean training pipeline. Unlike existing Self-Forcing series methods that rely on ODE initialization and subsequent distribution matching distillation (DMD), LongLive-2.0 directly tunes a diffusion model into a long, multi-shot, interactive auto-regressive (AR) diffusion model. It can be further converted to real-time generation (4 to 2 denoising steps) with standalone LoRA weights. For inference on Blackwell GPUs, we enable W4A4 NVFP4 inference, quantize KV cache into NVFP4 for memory savings, and boost end-to-end throughput with asynchronous streaming VAE decoding. On non-Blackwell GPU architectures, we deploy SP inference to match the speed on Blackwell GPUs, while the quantized KV cache can lower inter-GPU communication of SP. Experiments show up to 2.15x speedup in training, and 1.84x in inference. LongLive-2.0-5B achieves 45.7 FPS inference while attaining strong performance on benchmarks. To our knowledge, LongLive-2.0 is the first NVFP4 training and inference system for long video generation.

The Cosmic Microwave Background (CMB) radiation B mode polarization signal contains the unique signature of primordial metric perturbations produced during the inflation. The separation of the weak CMB B-mode signal from strong foreground contamination in observed maps is a complex task, and proposed new generation low noise satellite missions compete with the weak signal level of this gravitational background. In this article, for the first time, we employ a foreground model-independent internal linear combination (ILC) method to reconstruct the CMB B mode signal using simulated observations over large angular scales of the sky of 6 frequency bands of future generation CMB mission Probe of Inflation and Cosmic Origins (PICO). We estimate the joint CMB B mode posterior density following the interleaving Gibbs steps of B mode angular power spectrum and cleaned map samples using the ILC method. We extend and improve the earlier reported Bayesian ILC method to analyze weak CMB B mode reconstruction by introducing noise bias corrections at two stages during the ILC weight estimation. By performing 200 Monte Carlo simulations of the Bayesian ILC method, we find that our method can reconstruct the CMB signals and the joint posterior density accurately over large angular scales of the sky. We estimate Blackwell-Rao statistics of the marginal density of CMB B mode angular power spectrum and use them to estimate the joint density of scalar to tensor ratio r and a lensing power spectrum amplitude A^{lens}. Using 200 Monte Carlo simulations of the delensing approach, we find that our method can achieve an unbiased detection of the primordial gravitational wave signal r with more than 8σ significance for levels of r geqslant 0.01.

The NVFP4 lower-precision format, supported in hardware by NVIDIA Blackwell GPUs, promises to allow, for the first time, end-to-end fully-quantized pre-training of massive models such as LLMs. Yet, existing quantized training methods still sacrifice some of the representation capacity of this format in favor of more accurate unbiased quantized gradient estimation by stochastic rounding (SR), losing noticeable accuracy relative to standard FP16 and FP8 training. In this paper, improve the state of the art for quantized training in NVFP4 via a novel unbiased quantization routine for micro-scaled formats, called MS-EDEN, that has more than 2x lower quantization error than SR. We integrate it into a novel fully-NVFP4 quantization scheme for linear layers, called Quartet II. We show analytically that Quartet II achieves consistently better gradient estimation across all major matrix multiplications, both on the forward and on the backward passes. In addition, our proposal synergizes well with recent training improvements aimed specifically at NVFP4. We further validate Quartet II on end-to-end LLM training with up to 1.9B parameters on 38B tokens. We provide kernels for execution on NVIDIA Blackwell GPUs with up to 4.2x speedup over BF16. Our code is available at https://github.com/IST-DASLab/Quartet-II .

Attention, as a core layer of the ubiquitous Transformer architecture, is the bottleneck for large language models and long-context applications. While FlashAttention-3 optimized attention for Hopper GPUs through asynchronous execution and warp specialization, it primarily targets the H100 architecture. The AI industry has rapidly transitioned to deploying Blackwell-based systems such as the B200 and GB200, which exhibit fundamentally different performance characteristics due to asymmetric hardware scaling: tensor core throughput doubles while other functional units (shared memory bandwidth, exponential units) scale more slowly or remain unchanged. We develop several techniques to address these shifting bottlenecks on Blackwell GPUs: (1) redesigned pipelines that exploit fully asynchronous MMA operations and larger tile sizes, (2) software-emulated exponential and conditional softmax rescaling that reduces non-matmul operations, and (3) leveraging tensor memory and the 2-CTA MMA mode to reduce shared memory traffic and atomic adds in the backward pass. We demonstrate that our method, FlashAttention-4, achieves up to 1.3times speedup over cuDNN 9.13 and 2.7times over Triton on B200 GPUs with BF16, reaching up to 1613 TFLOPs/s (71% utilization). Beyond algorithmic innovations, we implement FlashAttention-4 entirely in CuTe-DSL embedded in Python, achieving 20-30times faster compile times compared to traditional C++ template-based approaches while maintaining full expressivity.

Using fewer bits to represent model parameters and related tensors during pre-training has become a required technique for improving GPU efficiency without sacrificing accuracy. Microscaling (MX) formats introduced in NVIDIA Blackwell generation of GPUs represent a major advancement of this technique, making it practical to combine narrow floating-point data types with finer granularity per-block scaling factors. In turn, this enables both quantization of more tensors than previous approaches and more efficient execution of operations on those tensors. Effective use of MX-formats requires careful choices of various parameters. In this paper we review these choices and show how MXFP8-E4M3 datatype and a specific number conversion algorithm result in training sessions that match those carried out in BF16. We present results using models with up to 8B parameters, trained on high-quality datasets of up to 15T tokens.

Many sparse attention mechanisms such as Neighborhood Attention have typically failed to consistently deliver speedup over the self attention baseline. This is largely due to the level of complexity in attention infrastructure, and the rapid evolution of AI hardware architecture. At the same time, many state-of-the-art foundational models, particularly in computer vision, are heavily bound by attention, and need reliable sparsity to escape the O(n^2) complexity. In this paper, we study a class of promising sparse attention mechanisms that focus on locality, and aim to develop a better analytical model of their performance improvements. We first introduce Generalized Neighborhood Attention (GNA), which can describe sliding window, strided sliding window, and blocked attention. We then consider possible design choices in implementing these approaches, and create a simulator that can provide much more realistic speedup upper bounds for any given setting. Finally, we implement GNA on top of a state-of-the-art fused multi-headed attention (FMHA) kernel designed for the NVIDIA Blackwell architecture in CUTLASS. Our implementation can fully realize the maximum speedup theoretically possible in many perfectly block-sparse cases, and achieves an effective utilization of 1.3 petaFLOPs/second in FP16. In addition, we plug various GNA configurations into off-the-shelf generative models, such as Cosmos-7B, HunyuanVideo, and FLUX, and show that it can deliver 28% to 46% end-to-end speedup on B200 without any fine-tuning. We will open source our simulator and Blackwell kernels directly through the NATTEN project.

The rapid advancement of large language models (LLMs) has been paralleled by unprecedented increases in computational demands, with training costs for state-of-the-art models doubling every few months. Training models directly in low-precision arithmetic offers a solution, by improving both computational throughput and energy efficiency. Specifically, NVIDIA's recent Blackwell architecture facilitates extremely low-precision operations, specifically FP4 variants, promising substantial efficiency gains. Yet, current algorithms for training LLMs in FP4 precision face significant accuracy degradation and often rely on mixed-precision fallbacks. In this paper, we systematically investigate hardware-supported FP4 training and introduce Quartet, a new approach enabling accurate, end-to-end FP4 training with all the major computations (in e.g. linear layers) being performed in low precision. Through extensive evaluations on Llama-type models, we reveal a new low-precision scaling law that quantifies performance trade-offs across varying bit-widths and allows us to identify a "near-optimal" low-precision training technique in terms of accuracy-vs-computation, called Quartet. We implement Quartet using optimized CUDA kernels tailored for NVIDIA Blackwell GPUs, and show that it can achieve state-of-the-art accuracy for FP4 precision, successfully training billion-scale models. Our method demonstrates that fully FP4-based training is a competitive alternative to standard-precision and FP8 training. Our code is available at https://github.com/IST-DASLab/Quartet.

Efficient attention algorithms are critical to mitigate the quadratic cost of attention in long-context workloads. Prior work utilises block-scaled quantisation techniques on Blackwell GPUs to move attention computation to 4-bit precision to accelerate inference. However, these techniques result in significant quality degradation in long-context settings. We show that the output impact of quantisation error is highly non-uniform and increases with the importance of each query-key interaction, concentrating functionally relevant error in a small number of attention blocks that contain the most important tokens. We propose ThriftAttention, a low-bit attention variant that delivers near-FP16 long-context quality at FP4 inference efficiency. This approach proceeds in two stages. First, a heuristic rapidly selects a small number of important query-key block pairs for FP16 precision. Second, the selected blocks are computed in FP16 and the remaining blocks in FP4, with both paths merged via online softmax into a single output. We demonstrate across long-context benchmarks and model families that by computing only 5% of query-key blocks in FP16, ThriftAttention recovers on average 89.1% of the FP4-to-FP16 performance gap. We show ThriftAttention's advantage grows with sequence length, mitigating the systematic FP4 quality degradation observed at longer contexts. The code is available at https://github.com/joesharratt1229/ThriftAttention.

Efficient genomic k-mer indexing depends on approximate membership query (AMQ) structures that must deliver high throughput, low false-positive rates (FPR), and modest memory footprints. The Super Bloom filter (SBF) is attractive for this scenario because minimizer-guided sharding and the Findere scheme exploit the redundancy of overlapping k-mers. However, those same features cause high per-k-mer compute cost, severe register pressure, and irregular memory accesses, which hinder an effective GPU implementation. We present cuSBF, an open-source, header-only CUDA library that implements SBF for sequence-native workloads. cuSBF's design merges sectorized shards, cooperative shared-memory tiling, warp-level shard sharing, and segmented warp reductions, turning super-k-mer locality into scalable GPU parallelism. Across real genomic workloads on RTX PRO 6000 Blackwell and GH200 systems, cuSBF achieves the highest throughput among all evaluated sequence-capable baselines. On the RTX PRO 6000, it surpasses the cuCollections blocked Bloom filter baseline by up to 9.1x for insertion and 7.7x for query, while reaching up to 92x and 234x speedups over the multi-threaded CPU Super Bloom reference implementation. It also outperforms GPU-based dynamic AMQs (Cuckoo, Two-Choice, Quotient filters) by 1.5-3400x depending on workload characteristics. A parameter sweep identifies (s = 28, m = 16, H = 4) as Pareto-optimal for k = 31, yielding significantly lower FPR than cuCollections at matched memory budgets. Crucially, cuSBF's architecture-aware design sustains 85% streaming multiprocessor utilization even for out-of-cache filters - proving that sequence locality, not raw bandwidth, is the key to GPU-accelerated genomic indexing.

Approximate Membership Query (AMQ) structures are essential for high-throughput systems in databases, networking, and bioinformatics. While Bloom filters offer speed, they lack support for deletions. Existing GPU-based dynamic alternatives, such as the Two-Choice Filter (TCF) and GPU Quotient Filter (GQF), enable deletions but incur severe performance penalties. We present Cuckoo-GPU, an open-source, high-performance Cuckoo filter library for GPUs. Instead of prioritizing cache locality, Cuckoo-GPU embraces the inherently random access pattern of Cuckoo hashing to fully saturate global memory bandwidth. Our design features a lock-free architecture built on atomic compare-and-swap operations, paired with a novel breadth-first search-based eviction heuristic that minimizes thread divergence and bounds sequential memory accesses during high-load insertions. Evaluated on NVIDIA GH200 (HBM3) and RTX PRO 6000 Blackwell (GDDR7) systems, Cuckoo-GPU closes the performance gap between append-only and dynamic AMQ structures. It achieves insertion, query, and deletion throughputs up to 378x (4.1x), 6x (34.7x), and 258x (107x) higher than GQF (TCF) on the same hardware, respectively, and delivers up to a 350x speedup over the fastest available multi-threaded CPU-based Cuckoo filter implementation. Moreover, its query throughput rivals that of the append-only GPU-based Blocked Bloom filter - demonstrating that dynamic AMQ structures can be deployed on modern accelerators without sacrificing performance.

We present a systematic study of fine-tuning OpenAI's Whisper large-v3 for Swiss German ASR, using 1,367 hours of broadcast speech paired with Standard German subtitles as weak supervision. Through 16 iterative training runs on an NVIDIA DGX Spark (Grace Blackwell, 128 GB unified memory, up to 1 PFLOP FP4), we compare LoRA and full fine-tuning of the 1.55B-parameter model, investigate hallucination root causes, and quantify the effect of data quality, subtitle alignment, and training strategy. Our best model achieves 25.6% measured WER on the All Swiss German Dialects Test Set (ASGDTS) in an honest evaluation on strictly disjoint data. A harmonized error analysis separating genuine errors from valid stylistic variation (tense, word order, Swiss orthography) yields a content WER (cWER) of 13.8%, counting only actual recognition failures. Bias-corrected estimation reduces this to 8.5%, suggesting the true error rate is roughly one third of measured WER. We demonstrate that published state-of-the-art Swiss German ASR results (17.1-17.5% WER) are inflated by benchmark contamination: a vanilla Whisper model self-trained on the ASGDTS test set with zero Swiss German data achieves 13.88% WER, surpassing all published systems. Experiments with Phi-4-multimodal show an even stronger memorization effect (3.9% WER), revealing that the benchmark primarily measures convention matching rather than dialectal comprehension. We release two models, a LoRA adapter (25.32% WER, 13.9% cWER) and a full fine-tuned model (25.60% WER, 13.8% cWER), among the few publicly available, honestly evaluated Whisper models for Swiss German, under Apache 2.0 with full reproducibility, requiring no institutional data agreements.

As large language models have grown larger, interest has grown in low-precision numerical formats such as NVFP4 as a way to improve speed and reduce memory usage. However, quantizing models to NVFP4 remains difficult as the lack of precision generally degrades model performance. In this work, we address this issue with Four Over Six (4/6), a modification to the block-scaled NVFP4 quantization algorithm that yields reduced quantization error. Unlike integer formats, floating point formats have non-uniform step sizes which create larger quantization error on larger values. 4/6 takes advantage of this by adaptively scaling some blocks to smaller FP4 values, making the distribution of representable values more uniform and reducing quantization error for near-maximal values. We show that 4/6 can be implemented efficiently on NVIDIA Blackwell GPUs, resulting in performance gains during both pre-training and inference with minimal computational overhead. In pre-training experiments with the Nemotron 3 Nano 30B-A3B model architecture, we find that 4/6 brings training loss closer to BF16 compared to models trained with current state-of-the-art NVFP4 training recipes. Our code is available at http://github.com/mit-han-lab/fouroversix.

Modern AI hardware, such as Nvidia's Blackwell architecture, is increasingly embracing low-precision floating-point (FP) formats to handle the pervasive activation outliers in Large Language Models (LLMs). Despite this industry trend, a unified comparison of FP and integer (INT) quantization across varying granularities has been missing, leaving algorithm and hardware co-design without clear guidance. This paper fills that gap by systematically investigating the trade-offs between FP and INT formats. We reveal a critical performance crossover: while FP excels in coarse-grained quantization, the comparison at fine-grained (block-wise) levels is more nuanced. Our comprehensive comparison demonstrates that for popular 8-bit fine-grained formats (e.g., MX with block size 32), MXINT8 is superior to its FP counterpart in both algorithmic accuracy and hardware efficiency. However, for 4-bit formats, FP (e.g., MXFP4, NVFP4) often holds an accuracy advantage , though we show that NVINT4 can surpass NVFP4 when outlier-mitigation techniques like Hadamard rotation are applied. We also introduce a symmetric clipping method that resolves gradient bias in fine-grained low-bit INT training, enabling nearly lossless performance for MXINT8 training. These findings challenge the current hardware trajectory, demonstrating that a one-size-fits-all FP approach is suboptimal and advocating that fine-grained INT formats, particularly MXINT8, offer a better balance of accuracy, power, and efficiency for future AI accelerators.

We present ITQ3_S (Interleaved Ternary Quantization -- Specialized), a novel 3-bit weight quantization format for LLMs integrating TurboQuant (TQ), a rotation-domain strategy based on the Fast Walsh-Hadamard Transform (FWHT). Conventional 3-bit methods suffer precision loss from heavy-tailed weight distributions and inter-channel outliers. ITQ3_S pre-rotates the weight space via FWHT before quantization, spreading outlier energy across the vector and inducing a near-Gaussian distribution amenable to uniform ternary coding. We derive a rigorous dequantization procedure fusing a 256-point Inverse FWHT into the CUDA shared-memory loading stage, ensuring reconstruction error is bounded exclusively by the ternary quantization grid with no additional error from the transform inversion. For any weight vector w in R^{256}, the reconstruction satisfies |mathbf{w} - w|_2 leq ε_q, strictly smaller than uniform 3-bit baselines that do not exploit rotation-induced distribution normalization. TurboQuant lacks a native CUDA kernel, precluding direct deployment; naively composing TQ with existing weight quantizers introduces domain mismatch errors that accumulate across layers, degrading quality below standard 3-bit baselines. ITQ3_S resolves this by co-designing the FWHT rotation and quantization kernel as a unified pipeline grounded in the IQ3_S weight format, with the inverse transform fused into the CUDA MMQ kernel. Empirically, on the NVIDIA RTX 5090 (Blackwell), ITQ3_S achieves perplexity competitive with FP16 while delivering throughput exceeding 1.5x that of 4-bit alternatives via optimized DP4A and Tensor Core scheduling. Our results establish ITQ3_S as a practical, mathematically grounded solution for high-fidelity LLM deployment on consumer hardware.

Real-time streaming video-to-video editing (V2V) is critical for interactive applications such as live broadcasting and gaming, yet it remains a formidable challenge due to the stringent requirements for temporal consistency and inference throughput. In this paper, we present SANA-Streaming, a system-algorithm co-designed framework for high-resolution, real-time streaming video editing on consumer GPUs, with the following three core designs: (1) Hybrid Diffusion Transformer architecture introduces softmax attention in part of the blocks to improve local modeling capabilities while preserving the efficiency of linear layers. (2) Cycle-Reverse Regularization is a novel training strategy that enforces semantic consistency by predicting source frames from generated content via flow matching, improving temporal consistency without requiring paired long edited videos. (3) Efficient System Co-design combines fused GDN kernels and Mixed-Precision Quantization (MPQ) optimized for the NVIDIA Blackwell (RTX 5090) architecture. By profiling real-world throughput, our MPQ maximizes Tensor Core utilization while maintaining generation quality. The resulting system achieves real-time 1280 x 704 resolution editing at 24 end-to-end FPS on a single RTX 5090 GPU, with the DiT core running at 58 FPS. Experimental results demonstrate that our co-design approach significantly outperforms existing SOTA methods in both temporal coherence and system throughput.

As is intrinsic to the fundamental goal of quantum computing, classical simulation of quantum algorithms is notoriously demanding in resource requirements. Nonetheless, simulation is critical to the success of the field and a requirement for algorithm development and validation, as well as hardware design. GPU-acceleration has become standard practice for simulation, and due to the exponential scaling inherent in classical methods, multi-GPU simulation can be required to achieve representative system sizes. In this case, inter-GPU communications can bottleneck performance. In this work, we present the introduction of MPI into the QED-C Application-Oriented Benchmarks to facilitate benchmarking on HPC systems. We review the advances in interconnect technology and the APIs for multi-GPU communication. We benchmark using a variety of interconnect paths, including the recent NVIDIA Grace Blackwell NVL72 architecture that represents the first product to expand high-bandwidth GPU-specialized interconnects across multiple nodes. We show that while improvements to GPU architecture have led to speedups of over 4.5X across the last few generations of GPUs, advances in interconnect performance have had a larger impact with over 16X performance improvements in time to solution for multi-GPU simulations.

Modern GPUs devote an increasing silicon budget to low-precision matrix-multiplication units, widening the precision-throughput gap for scientific computing workloads. Ozaki Schemes I and II offer an alternative by reconstructing high-precision general matrix multiplication (GEMM) from low-precision operations, yet existing implementations leave substantial performance untapped. In particular, intermediate results are repeatedly materialized in global memory, making data movement the dominant bottleneck. We present EmuGEMM, fused integer Tensor Core kernels for NVIDIA Hopper and Blackwell GPUs that eliminate redundant memory round-trips in both Ozaki schemes. Using Scheme I, EmuGEMM sustains up to 1,639 Top/s on Hopper (83% of INT8 peak) and 3,654 Top/s on Blackwell (81%). For large matrices, EmuGEMM surpasses cuBLAS TF32 throughput by up to 1.4x on Hopper and 1.7x on Blackwell, at comparable accuracy. Using Scheme II, EmuGEMM extends to complex arithmetic and outperforms cuBLAS ZGEMM by up to 2.3x on Hopper and 5.5x on Blackwell.

In this paper, we consider a very general model for exploration-exploitation tradeoff which allows arbitrary concave rewards and convex constraints on the decisions across time, in addition to the customary limitation on the time horizon. This model subsumes the classic multi-armed bandit (MAB) model, and the Bandits with Knapsacks (BwK) model of Badanidiyuru et al.[2013]. We also consider an extension of this model to allow linear contexts, similar to the linear contextual extension of the MAB model. We demonstrate that a natural and simple extension of the UCB family of algorithms for MAB provides a polynomial time algorithm that has near-optimal regret guarantees for this substantially more general model, and matches the bounds provided by Badanidiyuru et al.[2013] for the special case of BwK, which is quite surprising. We also provide computationally more efficient algorithms by establishing interesting connections between this problem and other well studied problems/algorithms such as the Blackwell approachability problem, online convex optimization, and the Frank-Wolfe technique for convex optimization. We give examples of several concrete applications, where this more general model of bandits allows for richer and/or more efficient formulations of the problem.

The emergence of large language models (LLMs) has significantly pushed the frontiers of program synthesis. Advancement of LLM-based program synthesis calls for a thorough evaluation of LLM-generated code. Most evaluation frameworks focus on the (functional) correctness of generated code; efficiency, as an important measure of code quality, has been overlooked in existing evaluations. In this work, we develop ENAMEL (EfficeNcy AutoMatic EvaLuator), a rigorous and high-standard benchmark for evaluating the capability of LLMs in generating efficient code. Firstly, we propose a new efficiency metric called eff@k, which generalizes the pass@k metric from correctness to efficiency and appropriately handles right-censored execution time. Furthermore, we derive an unbiased and variance-reduced estimator of eff@k via Rao--Blackwellization; we also provide a numerically stable implementation for the new estimator. Secondly, to set a high-standard for efficiency evaluation, we employ a human expert to design best algorithms and implementations as our reference solutions of efficiency, many of which are much more efficient than existing canonical solutions in HumanEval and HumanEval+. Moreover, to ensure a rigorous evaluation, we employ a human expert to curate strong test case generators to filter out wrong code and differentiate suboptimal algorithms. An extensive study across 30 popular LLMs using our benchmark ENAMEL shows that LLMs still fall short of generating expert-level efficient code. Using two subsets of our problem set, we demonstrate that such deficiency is because current LLMs struggle in designing advanced algorithms and are barely aware of implementation optimization. Our benchmark is publicly available at https://github.com/q-rz/enamel .

The efficiency of attention is important due to its quadratic time complexity. We enhance the efficiency of attention through two key contributions: First, we leverage the new FP4 Tensor Cores in Blackwell GPUs to accelerate attention computation. Our implementation achieves 1038 TOPS on RTX5090, which is a 5x speedup over the fastest FlashAttention on RTX5090. Experiments show that our FP4 attention can accelerate inference of various models in a plug-and-play way. Second, we pioneer low-bit attention to training tasks. Existing low-bit attention works like FlashAttention3 and SageAttention focus only on inference. However, the efficiency of training large models is also important. To explore whether low-bit attention can be effectively applied to training tasks, we design an accurate and efficient 8-bit attention for both forward and backward propagation. Experiments indicate that 8-bit attention achieves lossless performance in fine-tuning tasks but exhibits slower convergence in pretraining tasks. The code will be available at https://github.com/thu-ml/SageAttention.

Agentic Variation Operators (AVO) are a new family of evolutionary variation operators that replace the fixed mutation, crossover, and hand-designed heuristics of classical evolutionary search with autonomous coding agents. Rather than confining a language model to candidate generation within a prescribed pipeline, AVO instantiates variation as a self-directed agent loop that can consult the current lineage, a domain-specific knowledge base, and execution feedback to propose, repair, critique, and verify implementation edits. We evaluate AVO on attention, among the most aggressively optimized kernel targets in AI, on NVIDIA Blackwell (B200) GPUs. Over 7 days of continuous autonomous evolution on multi-head attention, AVO discovers kernels that outperform cuDNN by up to 3.5% and FlashAttention-4 by up to 10.5% across the evaluated configurations. The discovered optimizations transfer readily to grouped-query attention, requiring only 30 minutes of additional autonomous adaptation and yielding gains of up to 7.0% over cuDNN and 9.3% over FlashAttention-4. Together, these results show that agentic variation operators move beyond prior LLM-in-the-loop evolutionary pipelines by elevating the agent from candidate generator to variation operator, and can discover performance-critical micro-architectural optimizations that produce kernels surpassing state-of-the-art expert-engineered attention implementations on today's most advanced GPU hardware.

FP4 training promises substantial reductions in memory and computation cost for LLM pretraining, yet current FP4 hardware paths and recipes, including NVIDIA Blackwell/Rubin-class systems and AMD MI350-series GPUs, remain centered on E2M1 data elements. In this study, we identify a fundamental limitation of that choice: non-uniform formats such as E2M1 inherently suffer from Shrinkage Bias, a systematic negative rounding error caused by the geometric asymmetry of their representable bins. We show that this bias accumulates multiplicatively across layers and is amplified by the Random Hadamard Transform (RHT), providing a unified explanation for the training instability observed in existing E2M1-based FP4 recipes. In contrast, uniform grids (E1M2/INT4) bypass this grid-geometry error and better convert the improved bucket utilization from RHT into higher quantization quality. Based on this finding, we propose UFP4, a uniform 4-bit training recipe that applies RHT to all three training GEMMs while restricting stochastic rounding to dY alone. On Dense 1.5B, MoE 7.9B, and MoE 124B long-run pretraining, UFP4 consistently achieves lower BF16-relative loss degradation than strong E2M1-based baselines, supported by scaling-law analysis and ablation studies. Our results suggest that future accelerators should support E1M2/INT4-style uniform 4-bit grids as first-class training primitives alongside E2M1.

As agentic AI systems become increasingly capable of generating and optimizing GPU kernels, progress is constrained by benchmarks that reward speedup over software baselines rather than proximity to hardware-efficient execution. We present SOL-ExecBench, a benchmark of 235 CUDA kernel optimization problems extracted from 124 production and emerging AI models spanning language, diffusion, vision, audio, video, and hybrid architectures, targeting NVIDIA Blackwell GPUs. The benchmark covers forward and backward workloads across BF16, FP8, and NVFP4, including kernels whose best performance is expected to rely on Blackwell-specific capabilities. Unlike prior benchmarks that evaluate kernels primarily relative to software implementations, SOL-ExecBench measures performance against analytically derived Speed-of-Light (SOL) bounds computed by SOLAR, our pipeline for deriving hardware-grounded SOL bounds, yielding a fixed target for hardware-efficient optimization. We report a SOL Score that quantifies how much of the gap between a release-defined scoring baseline and the hardware SOL bound a candidate kernel closes. To support robust evaluation of agentic optimizers, we additionally provide a sandboxed harness with GPU clock locking, L2 cache clearing, isolated subprocess execution, and static analysis based checks against common reward-hacking strategies. SOL-ExecBench reframes GPU kernel benchmarking from beating a mutable software baseline to closing the remaining gap to hardware Speed-of-Light.

Large language models show promise for automated CUDA programming, however even the strongest coding models (e.g., Claude-Opus-4.6) may still fall short of expert-level, architecture-aware optimization. We introduce CUDAHercules, a benchmark that evaluates generated CUDA against end-to-end human-expert SOTA systems. It spans single kernels, module-level operators, full applications, and unsolved challenge tasks across Ampere, Hopper, and Blackwell GPUs, with end-to-end tasks gated by domain-specific semantic validators. Evaluating models such as Claude-Opus-4.6 and GPT-5.4 shows a large gap between runnable CUDA and expert CUDA engineering: models often compile and pass tests, but rarely recover the optimization strategies needed to match expert performance. Application semantics further reduce success, and iterative or tool-augmented feedback can improve correctness while drifting toward slow fallback implementations. These results show that automated CUDA programming remains far from fully solved and requires stronger hardware reasoning, better tool use, and training objectives that connect code understanding to hardware architecture-grounded intelligence.

The MXFP4 microscaling format, which partitions tensors into blocks of 32 elements sharing an E8M0 scaling factor, has emerged as a promising substrate for efficient LLM inference, backed by native hardware support on NVIDIA Blackwell Tensor Cores. However, activation outliers pose a unique challenge under this format: a single outlier inflates the shared block scale, compressing the effective dynamic range of the remaining elements and causing significant quantization error. Existing rotation-based remedies, including randomized Hadamard and learnable rotations, are data-agnostic and therefore unable to specifically target the channels where outliers concentrate. We propose DuQuant++, which adapts the outlier-aware fine-grained rotation of DuQuant to the MXFP4 format by aligning the rotation block size with the microscaling group size (B{=}32). Because each MXFP4 group possesses an independent scaling factor, the cross-block variance issue that necessitates dual rotations and a zigzag permutation in the original DuQuant becomes irrelevant, enabling DuQuant++ to replace the entire pipeline with a single outlier-aware rotation, which halves the online rotation cost while simultaneously smoothing the weight distribution. Extensive experiments on the LLaMA-3 family under MXFP4 W4A4 quantization show that DuQuant++ consistently achieves state-of-the-art performance. Our code is available at https://github.com/Hsu1023/DuQuant-v2.

Quantization addresses the high resource demand for large language models (LLMs) by alleviating memory pressure and bandwidth congestion and providing significantly scaled compute power with a tolerable impact on accuracy. Four-bit floating point (FP4), the lowest-precision format that preserves essential numerical properties such as exponent and sign, has begun to be adopted in cutting-edge architectures, including Blackwell and AMD CDNA, to support LLM quantization and reduce deployment costs. Although aggressive quantization can yield efficiency gains, the quantization sensitivity of within-transformer layers and whether these sensitivities generalize across existing FP4 formats and model scales remain underexplored. To elucidate quantization sensitivity, this study conducts a systematic analysis of two FP4 formats, MXFP4 and NVFP4, across three Qwen2.5 model scales (0.5B, 7B, and 14B), using controlled component-wise and block-wise isolation methodologies. We observe that MLP up- and down-projection layers consistently dominate in terms of sensitivity, while gate and attention projections are moderately and substantially less sensitive to FP4 quantization, respectively. We further find that sensitivity does not universally localize to the final blocks, but early blocks can be highly sensitive, particularly under MXFP4. Our results provide a diagnostic characterization of the inference behavior of FP4 across components, depths, and FP4 formats.

VIBETENSOR is an open-source research system software stack for deep learning, generated by LLM-powered coding agents under high-level human guidance. In this paper, "fully generated" refers to code provenance: implementation changes were produced and applied as agent-proposed diffs; validation relied on agent-run builds, tests, and differential checks, without per-change manual diff review. It implements a PyTorch-style eager tensor library with a C++20 core (CPU+CUDA), a torch-like Python overlay via nanobind, and an experimental Node.js/TypeScript interface. Unlike thin bindings, VIBETENSOR includes its own tensor/storage system, schema-lite dispatcher, reverse-mode autograd, CUDA runtime (streams/events/graphs), a stream-ordered caching allocator with diagnostics, and a stable C ABI for dynamically loaded operator plugins. We view this release as a milestone for AI-assisted software engineering: it shows coding agents can generate a coherent deep learning runtime spanning language bindings down to CUDA memory management, validated primarily by builds and tests. We describe the architecture, summarize the workflow used to produce and validate the system, and evaluate the artifact. We report repository scale and test-suite composition, and summarize reproducible microbenchmarks from an accompanying AI-generated kernel suite, including fused attention versus PyTorch SDPA/FlashAttention. We also report end-to-end training sanity checks on 3 small workloads (sequence reversal, ViT, miniGPT) on NVIDIA H100 (Hopper, SM90) and Blackwell-class GPUs; multi-GPU results are Blackwell-only and use an optional CUTLASS-based ring-allreduce plugin gated on CUDA 13+ and sm103a toolchain support. Finally, we discuss failure modes in generated system software, including a "Frankenstein" composition effect where locally correct subsystems interact to yield globally suboptimal performance.

GPU architectures have continued to grow in complexity, with recent incarnations introducing increasingly powerful fixed-function units for matrix multiplication and data movement to accompany highly parallel general-purpose cores. To fully leverage these machines, software must use sophisticated schedules that maximally utilize all hardware resources. Since realizing such schedules is complex, both programmers and compilers routinely employ program transformations, such as software pipelining (SWP) and warp specialization (WS), to do so in practice. However, determining how best to use SWP and WS in combination is a challenging problem that is currently handled through a mix of brittle compilation heuristics and fallible human intuition, with little insight into the space of solutions. To remedy this situation, we introduce a novel formulation of SWP and WS as a joint optimization problem that can be solved holistically by off-the-shelf constraint solvers. We reify our approach in Twill, the first system that automatically derives optimal SWP and WS schedules for a large class of iterative programs. Twill is heuristic-free, easily extensible to new GPU architectures, and guaranteed to produce optimal schedules. We show that Twill can rediscover, and thereby prove optimal, the SWP and WS schedules manually developed by experts for Flash Attention on both the NVIDIA Hopper and Blackwell GPU architectures.

Markov categories are a recent categorical approach to the mathematical foundations of probability and statistics. Here, this approach is advanced by stating and proving equivalent conditions for second-order stochastic dominance, a widely used way of comparing probability distributions by their spread. Furthermore, we lay foundation for the theory of comparing statistical experiments within Markov categories by stating and proving the classical Blackwell-Sherman-Stein Theorem. Our version not only offers new insight into the proof, but its abstract nature also makes the result more general, automatically specializing to the standard Blackwell-Sherman-Stein Theorem in measure-theoretic probability as well as a Bayesian version that involves prior-dependent garbling. Along the way, we define and characterize representable Markov categories, within which one can talk about Markov kernels to or from spaces of distributions. We do so by exploring the relation between Markov categories and Kleisli categories of probability monads.

While diffusion models excel at generating high-quality images, prior work reports a significant performance gap between diffusion and autoregressive (AR) methods in language modeling. In this work, we show that simple masked discrete diffusion is more performant than previously thought. We apply an effective training recipe that improves the performance of masked diffusion models and derive a simplified, Rao-Blackwellized objective that results in additional improvements. Our objective has a simple form -- it is a mixture of classical masked language modeling losses -- and can be used to train encoder-only language models that admit efficient samplers, including ones that can generate arbitrary lengths of text semi-autoregressively like a traditional language model. On language modeling benchmarks, a range of masked diffusion models trained with modern engineering practices achieves a new state-of-the-art among diffusion models, and approaches AR perplexity. We release our code at: https://github.com/kuleshov-group/mdlm

Non-linear state-space models, also known as general hidden Markov models, are ubiquitous in statistical machine learning, being the most classical generative models for serial data and sequences in general. The particle-based, rapid incremental smoother PaRIS is a sequential Monte Carlo (SMC) technique allowing for efficient online approximation of expectations of additive functionals under the smoothing distribution in these models. Such expectations appear naturally in several learning contexts, such as likelihood estimation (MLE) and Markov score climbing (MSC). PARIS has linear computational complexity, limited memory requirements and comes with non-asymptotic bounds, convergence results and stability guarantees. Still, being based on self-normalised importance sampling, the PaRIS estimator is biased. Our first contribution is to design a novel additive smoothing algorithm, the Parisian particle Gibbs PPG sampler, which can be viewed as a PaRIS algorithm driven by conditional SMC moves, resulting in bias-reduced estimates of the targeted quantities. We substantiate the PPG algorithm with theoretical results, including new bounds on bias and variance as well as deviation inequalities. Our second contribution is to apply PPG in a learning framework, covering MLE and MSC as special examples. In this context, we establish, under standard assumptions, non-asymptotic bounds highlighting the value of bias reduction and the implicit Rao--Blackwellization of PPG. These are the first non-asymptotic results of this kind in this setting. We illustrate our theoretical results with numerical experiments supporting our claims.