Daily Papers

Recently, growing interest has been aroused in extending the multimodal capability of large language models (LLMs), e.g., vision-language (VL) learning, which is regarded as the next milestone of artificial general intelligence. However, existing solutions are prohibitively expensive, which not only need to optimize excessive parameters, but also require another large-scale pre-training before VL instruction tuning. In this paper, we propose a novel and affordable solution for the effective VL adaption of LLMs, called Mixture-of-Modality Adaptation (MMA). Instead of using large neural networks to connect the image encoder and LLM, MMA adopts lightweight modules, i.e., adapters, to bridge the gap between LLMs and VL tasks, which also enables the joint optimization of the image and language models. Meanwhile, MMA is also equipped with a routing algorithm to help LLMs achieve an automatic shift between single- and multi-modal instructions without compromising their ability of natural language understanding. To validate MMA, we apply it to a recent LLM called LLaMA and term this formed large vision-language instructed model as LaVIN. To validate MMA and LaVIN, we conduct extensive experiments under two setups, namely multimodal science question answering and multimodal dialogue. The experimental results not only demonstrate the competitive performance and the superior training efficiency of LaVIN than existing multimodal LLMs, but also confirm its great potential as a general-purpose chatbot. More importantly, the actual expenditure of LaVIN is extremely cheap, e.g., only 1.4 training hours with 3.8M trainable parameters, greatly confirming the effectiveness of MMA. Our project is released at https://luogen1996.github.io/lavin.

We consider stochastic sequential learning problems where the learner can observe the average reward of several actions. Such a setting is interesting in many applications involving monitoring and surveillance, where the set of the actions to observe represent some (geographical) area. The importance of this setting is that in these applications, it is actually cheaper to observe average reward of a group of actions rather than the reward of a single action. We show that when the reward is smooth over a given graph representing the neighboring actions, we can maximize the cumulative reward of learning while minimizing the sensing cost. In this paper we propose CheapUCB, an algorithm that matches the regret guarantees of the known algorithms for this setting and at the same time guarantees a linear cost again over them. As a by-product of our analysis, we establish a Ω(dT) lower bound on the cumulative regret of spectral bandits for a class of graphs with effective dimension d.

A small transformer encoder is trained to map Terminal-Wrench trajectories onto a unit sphere where embedding distance approximates the L_1 distance between reward and metadata signals. A linear probe on top of that embedding detects reward hacking on the cleaned test split with AUC 0.9467 and TPR@5%FPR 0.8296, matching the TW sanitized LLM-as-judge AUC (0.9510 on the cleaned split) and exceeding its TPR@5%FPR (0.7130 vs 0.8296) on the same information condition, at roughly four orders of magnitude lower per-trajectory cost. The encoder is not a pure behavior reader: stripping natural-language reasoning from its input at probe time drops AUC to 0.6213.

Inference cascades cut cost by answering most queries with a cheap model and escalating a hard tail to a frontier model that acts as verifier. A natural extension closes the loop: fine-tune the cheap student on the verifier's rejections so the escalation rate, and cost, fall each round. We measure this loop on real LLMs and report four findings. First, the verifier's blind spot, the fraction of the student's wrong answers it accepts, is large and moves adversarially: it grows with student capability (β from 0.12 to 0.55 as the student scales 0.5B to 32B) and shrinks with verifier capability, so it is worst in the cheap-student, cheap-verifier regime cascades exist to create. Second, buying it away returns the saving: a frontier verifier drives β to about 0.05 but then escalates on 46% of hard-MATH queries against a 39% true error rate, paying the frontier price on nearly half of all traffic. Third, naive corrective fine-tuning on the verifier-rejected tail does not improve the small student but degrades and ultimately collapses it, across every teacher we tried (cross-family and same-family), so at this scale the self-improving loop is self-defeating. Fourth, through all of this the cascade's own dashboard, every metric computed through the verifier, reads a flat 3% error while true delivered error swings up to 32%: the system is blind to its own degradation by construction. We then give the theory that explains the blindness, a two-population conservation law, ε_infty lesssim q_0 β_0, under which every in-loop metric improves while true quality does not, and a synthetic study that validates the mechanism. The practical conclusion: the reliability of a self-improving cascade cannot be read from any metric computed through its own verifier.

Large language models (LLMs) power many state-of-the-art systems in natural language processing. However, these models are extremely computationally expensive, even at inference time, raising the natural question: when is the extra cost of deploying a larger model worth the anticipated boost in capabilities? Better understanding this tradeoff fundamentally could benefit from an inference efficiency metric that is both (i) easily comparable across models from different providers, and (ii) representative of the true cost of running queries in an isolated performance environment. Unfortunately, access to LLMs today is largely restricted to black-box text generation APIs and raw runtimes measured through this interface do not satisfy these desiderata: model providers can apply various software and hardware optimizations orthogonal to the model, and models served on shared infrastructure are susceptible to performance contention. To circumvent these problems, we propose a new metric for comparing inference efficiency across models. This metric puts models on equal footing as though they were served (i) on uniform hardware and software, and (ii) without performance contention. We call this metric the idealized runtime, and we propose a methodology to efficiently estimate this metric for autoregressive Transformer models. We also propose cost-aware variants that incorporate the number of accelerators needed to serve the model. Using these metrics, we compare ten state-of-the-art LLMs to provide the first analysis of inference efficiency-capability tradeoffs; we make several observations from this analysis, including the fact that the superior inference runtime performance of certain APIs is often a byproduct of optimizations within the API rather than the underlying model. Our methodology also facilitates the efficient comparison of different software and hardware stacks.

LLMs are effective at code generation tasks like text-to-SQL, but is it worth the cost? Many state-of-the-art approaches use non-task-specific LLM techniques including Chain-of-Thought (CoT), self-consistency, and fine-tuning. These methods can be costly at inference time, sometimes requiring over a hundred LLM calls with reasoning, incurring average costs of up to \0.46 per query, while fine-tuning models can cost thousands of dollars. We introduce "N-rep" consistency, a more cost-efficient text-to-SQL approach that achieves similar BIRD benchmark scores as other more expensive methods, at only 0.039 per query. N-rep leverages multiple representations of the same schema input to mitigate weaknesses in any single representation, making the solution more robust and allowing the use of smaller and cheaper models without any reasoning or fine-tuning. To our knowledge, N-rep is the best-performing text-to-SQL approach in its cost range.

Adversarial attacks in reinforcement learning (RL) often assume highly-privileged access to the victim's parameters, environment, or data. Instead, this paper proposes a novel adversarial setting called a Cheap Talk MDP in which an Adversary can merely append deterministic messages to the Victim's observation, resulting in a minimal range of influence. The Adversary cannot occlude ground truth, influence underlying environment dynamics or reward signals, introduce non-stationarity, add stochasticity, see the Victim's actions, or access their parameters. Additionally, we present a simple meta-learning algorithm called Adversarial Cheap Talk (ACT) to train Adversaries in this setting. We demonstrate that an Adversary trained with ACT still significantly influences the Victim's training and testing performance, despite the highly constrained setting. Affecting train-time performance reveals a new attack vector and provides insight into the success and failure modes of existing RL algorithms. More specifically, we show that an ACT Adversary is capable of harming performance by interfering with the learner's function approximation, or instead helping the Victim's performance by outputting useful features. Finally, we show that an ACT Adversary can manipulate messages during train-time to directly and arbitrarily control the Victim at test-time. Project video and code are available at https://sites.google.com/view/adversarial-cheap-talk

Keyword-matching benchmarks can credit small models for tool use they never perform. We document such a false positive in a matched-architecture pair of Spanish security language models and propose a ladder of strict, cheap diagnostics. A 661.6M parameter model (approx. 65% code/technical text; no dedicated SFT) and a 1,109M model (web-heavy multi-phase curriculum; 6B-token tool-SFT) share decoder, tokenizer, and special tokens, scoring almost identically on lenient tool-use metrics (B4: 0.660 vs. 0.650). Verbatim-reproduction checks on training examples separate them completely: the 600M emits valid tool calls with generalized arguments on 6/6 examples; the 1B does so on 0/6 across checkpoints. A first-token probe localizes the 1B's failure to a missing prior (prob. 10^{-4}--10^{-5} on <|tool_call|>), which was erased by its web-heavy training phase. A targeted SFT recipe (diverse corpus, 5x higher learning rate, 2,202 steps, ~3.3 GPU-hours) repairs the 1B using three orders of magnitude fewer tokens than the failed phase. On all 269 corpus rows, valid emission rises from 0.100 to 0.959 (600M: 0.926). On 238 unseen prompts, the repaired 1B passes 0.536 vs. the 600M's 0.428 (p = 0.004). Embedding-drift checks show the repair did not move the trigger token's tied embedding (97.7% of the bf16 table remains bit-identical), meaning changes live in the surrounding network. Both models over-trigger, rarely answering negative prompts without a call (0.09 for 600M, 0.17 for repaired 1B). Factorial analyses confirm all repair configurations install the format, though suppression benefits from a diverse corpus remain a hypothesis due to seed sensitivity. This cheap diagnostic ladder costs minutes of CPU time and should gate tool-use claims on small models.

Diffusion models that are based on iterative denoising have been recently proposed and leveraged in various generation tasks like image generation. Whereas, as a way inherently built for continuous data, existing diffusion models still have some limitations in modeling discrete data, e.g., languages. For example, the generally used Gaussian noise can not handle the discrete corruption well, and the objectives in continuous spaces fail to be stable for textual data in the diffusion process especially when the dimension is high. To alleviate these issues, we introduce a novel diffusion model for language modeling, Masked-Diffuse LM, with lower training cost and better performances, inspired by linguistic features in languages. Specifically, we design a linguistic-informed forward process which adds corruptions to the text through strategically soft-masking to better noise the textual data. Also, we directly predict the categorical distribution with cross-entropy loss function in every diffusion step to connect the continuous space and discrete space in a more efficient and straightforward way. Through experiments on 5 controlled generation tasks, we demonstrate that our Masked-Diffuse LM can achieve better generation quality than the state-of-the-art diffusion models with better efficiency.

Llama 2-Chat is a collection of large language models that Meta developed and released to the public. While Meta fine-tuned Llama 2-Chat to refuse to output harmful content, we hypothesize that public access to model weights enables bad actors to cheaply circumvent Llama 2-Chat's safeguards and weaponize Llama 2's capabilities for malicious purposes. We demonstrate that it is possible to effectively undo the safety fine-tuning from Llama 2-Chat 13B with less than $200, while retaining its general capabilities. Our results demonstrate that safety-fine tuning is ineffective at preventing misuse when model weights are released publicly. Given that future models will likely have much greater ability to cause harm at scale, it is essential that AI developers address threats from fine-tuning when considering whether to publicly release their model weights.

The majority of the research on the quantization of Deep Neural Networks (DNNs) is focused on reducing the precision of tensors visible by high-level frameworks (e.g., weights, activations, and gradients). However, current hardware still relies on high-accuracy core operations. Most significant is the operation of accumulating products. This high-precision accumulation operation is gradually becoming the main computational bottleneck. This is because, so far, the usage of low-precision accumulators led to a significant degradation in performance. In this work, we present a simple method to train and fine-tune high-end DNNs, to allow, for the first time, utilization of cheaper, 12-bits accumulators, with no significant degradation in accuracy. Lastly, we show that as we decrease the accumulation precision further, using fine-grained gradient approximations can improve the DNN accuracy.

LLM agents increasingly act over long horizons, where a single trajectory can contain hundreds or thousands of actions. In these settings, outcome-only rewards provide too sparse guidance, failing to inform the model about the goodness of intermediate actions. Dense supervision methods aim to solve this problem by scoring intermediate steps, from intrinsic confidence to self-distillation and embedding similarities. However, it is common practice to evaluate them by measuring the downstream performance of a training pipeline that integrates them. This is expensive, conflates supervision quality with training engineering confounders, and renders different methodological families requiring distinct training setups incomparable. As a result, dense supervision methods are rarely benchmarked on common ground. We introduce QVal, a training-free testbed for directly evaluating dense supervision signals. Given a state-action pair, QVal measures how well a method's score is Q-aligned: whether it orders actions according to the Q-values of a strong reference-policy. This lets us compare signals before any training run and separate signal quality from other engineering choices. We instantiate QVal as QVal-v1.0, benchmarking 21 dense supervision methods across four diverse environments and seven methodological families, with over 1.2K evaluation experiments across six open-weight model backbones. We find that simple prompting baselines consistently outperform recent dense supervision methods from the literature, and that performance clusters strongly by family. These findings hold across model sizes, environments, and observation modalities. QVal is designed to be easily extensible to new environments and methods, enabling researchers to iterate on dense supervision methods before any training run.

Evaluating LLM agents is essential for guiding their development, yet it has grown prohibitively expensive: a single pass of a frontier model over an agentic benchmark can cost hundreds to thousands of dollars, a price paid repeatedly across iterative development cycles. Prior efforts, centered on benchmark distillation, reduce the number of evaluation tasks but leave the cost of executing each retained task untouched. In this work, we introduce early outcome prediction, a complementary axis of efficiency that instead cuts cost within each task. Our key insight is that an agent's final outcome is often evident from its intermediate behavior well before execution completes. We instantiate this idea in EarlyEval, a lightweight framework that trains a pair of LightGBM success and failure classifiers over behavioral, textual, and reference-solution features, and halts an agent run the moment either classifier crosses a calibrated confidence threshold, adding negligible per-step overhead. Across three benchmarks, SWE-bench Verified, TerminalBench, and Toolathlon, EarlyEval can eliminate 13%-26% of agent steps and up to 44.1% input tokens and 29.4% output tokens at 89%-97% prediction accuracy, while perturbing per-agent resolve rates by only one to two percentage points on average.

Deploying convolutional neural networks (CNNs) on embedded devices is difficult due to the limited memory and computation resources. The redundancy in feature maps is an important characteristic of those successful CNNs, but has rarely been investigated in neural architecture design. This paper proposes a novel Ghost module to generate more feature maps from cheap operations. Based on a set of intrinsic feature maps, we apply a series of linear transformations with cheap cost to generate many ghost feature maps that could fully reveal information underlying intrinsic features. The proposed Ghost module can be taken as a plug-and-play component to upgrade existing convolutional neural networks. Ghost bottlenecks are designed to stack Ghost modules, and then the lightweight GhostNet can be easily established. Experiments conducted on benchmarks demonstrate that the proposed Ghost module is an impressive alternative of convolution layers in baseline models, and our GhostNet can achieve higher recognition performance (e.g. 75.7% top-1 accuracy) than MobileNetV3 with similar computational cost on the ImageNet ILSVRC-2012 classification dataset. Code is available at https://github.com/huawei-noah/ghostnet

Light-weight convolutional neural networks (CNNs) are specially designed for applications on mobile devices with faster inference speed. The convolutional operation can only capture local information in a window region, which prevents performance from being further improved. Introducing self-attention into convolution can capture global information well, but it will largely encumber the actual speed. In this paper, we propose a hardware-friendly attention mechanism (dubbed DFC attention) and then present a new GhostNetV2 architecture for mobile applications. The proposed DFC attention is constructed based on fully-connected layers, which can not only execute fast on common hardware but also capture the dependence between long-range pixels. We further revisit the expressiveness bottleneck in previous GhostNet and propose to enhance expanded features produced by cheap operations with DFC attention, so that a GhostNetV2 block can aggregate local and long-range information simultaneously. Extensive experiments demonstrate the superiority of GhostNetV2 over existing architectures. For example, it achieves 75.3% top-1 accuracy on ImageNet with 167M FLOPs, significantly suppressing GhostNetV1 (74.5%) with a similar computational cost. The source code will be available at https://github.com/huawei-noah/Efficient-AI-Backbones/tree/master/ghostnetv2_pytorch and https://gitee.com/mindspore/models/tree/master/research/cv/ghostnetv2.

Large language models have emerged as a versatile tool but are challenging to apply to tasks lacking large inference budgets and large in-domain training sets. This work formalizes these constraints and distinguishes four important variables: the pretraining budget (for training before the target domain is known), the specialization budget (for training after the target domain is known), the inference budget, and the in-domain training set size. Across these settings, we compare different approaches from the machine learning literature. Limited by inference cost, we find better alternatives to the standard practice of training very large vanilla transformer models. In particular, we show that hyper-networks and mixture of experts have better perplexity for large pretraining budgets, while small models trained on importance sampled datasets are attractive for large specialization budgets.

Diffusion models have proven to be highly effective in image and video generation; however, they still face composition challenges when generating images of varying sizes due to single-scale training data. Adapting large pre-trained diffusion models for higher resolution demands substantial computational and optimization resources, yet achieving a generation capability comparable to low-resolution models remains elusive. This paper proposes a novel self-cascade diffusion model that leverages the rich knowledge gained from a well-trained low-resolution model for rapid adaptation to higher-resolution image and video generation, employing either tuning-free or cheap upsampler tuning paradigms. Integrating a sequence of multi-scale upsampler modules, the self-cascade diffusion model can efficiently adapt to a higher resolution, preserving the original composition and generation capabilities. We further propose a pivot-guided noise re-schedule strategy to speed up the inference process and improve local structural details. Compared to full fine-tuning, our approach achieves a 5X training speed-up and requires only an additional 0.002M tuning parameters. Extensive experiments demonstrate that our approach can quickly adapt to higher resolution image and video synthesis by fine-tuning for just 10k steps, with virtually no additional inference time.

Text image is a unique and crucial information medium that integrates visual aesthetics and linguistic semantics in modern e-society. Due to their subtlety and complexity, the generation of text images represents a challenging and evolving frontier in the image generation field. The recent surge of specialized image generators (e.g., Flux-series) and unified generative models (e.g., GPT-4o), which demonstrate exceptional fidelity, raises a natural question: can they master the intricacies of text image generation and editing? Motivated by this, we assess current state-of-the-art generative models' capabilities in terms of text image generation and editing. We incorporate various typical optical character recognition (OCR) tasks into our evaluation and broaden the concept of text-based generation tasks into OCR generative tasks. We select 33 representative tasks and categorize them into five categories: document, handwritten text, scene text, artistic text, and complex \& layout-rich text. For comprehensive evaluation, we examine six models across both closed-source and open-source domains, using tailored, high-quality image inputs and prompts. Through this evaluation, we draw crucial observations and identify the weaknesses of current generative models for OCR tasks. We argue that photorealistic text image generation and editing should be internalized as foundational skills into general-domain generative models, rather than being delegated to specialized solutions, and we hope this empirical analysis can provide valuable insights for the community to achieve this goal. This evaluation is online and will be continuously updated at our GitHub repository.

Current alignment evaluation mostly measures whether models encode dangerous concepts and whether they refuse harmful requests. Both miss the layer where alignment often operates: routing from concept detection to behavioral policy. We study political censorship in Chinese-origin language models as a natural experiment, using probes, surgical ablations, and behavioral tests across nine open-weight models from five labs. Three findings follow. First, probe accuracy alone is non-diagnostic: political probes, null controls, and permutation baselines can all reach 100%, so held-out category generalization is the informative test. Second, surgical ablation reveals lab-specific routing. Removing the political-sensitivity direction eliminates censorship and restores accurate factual output in most models tested, while one model confabulates because its architecture entangles factual knowledge with the censorship mechanism. Cross-model transfer fails, indicating that routing geometry is model- and lab-specific. Third, refusal is no longer the dominant censorship mechanism. Within one model family, hard refusal falls to zero while narrative steering rises to the maximum, making censorship invisible to refusal-only benchmarks. These results support a three-stage descriptive framework: detect, route, generate. Models often retain the relevant knowledge; alignment changes how that knowledge is expressed. Evaluations that audit only detection or refusal therefore miss the routing mechanism that most directly determines behavior.

Retrieval-Augmented Generation (RAG) has become a standard approach for knowledge-intensive question answering, but existing systems remain brittle on multi-hop questions, where solving the task requires chaining multiple retrieval and reasoning steps. Key challenges are that current methods represent reasoning through free-form natural language, where intermediate states are implicit, retrieval queries can drift from intended entities, and errors are detected by the same model that produces them making self-reflection an unreliable, ungrounded signal. We observe that multi-hop question answering is a typical form of step-by-step computation, and that this structured process aligns closely with how code-specialized language models are trained to operate. Motivated by this, we introduce \pyrag, a framework that reformulates multi-hop RAG as program synthesis and execution. Instead of free-form reasoning trajectories, \pyrag represents the reasoning process as an executable Python program over retrieval and QA tools, exposing intermediate states as variables, producing deterministic feedback through execution, and yielding an inspectable trace of the entire reasoning process. This formulation further enables compiler-grounded self-repair and execution-driven adaptive retrieval without any additional training. Experiments on five QA benchmarks (PopQA, HotpotQA, 2WikiMultihopQA, MuSiQue, and Bamboogle) show that \pyrag consistently outperforms strong baselines under both training-free and RL-trained settings, with especially large gains on compositional multi-hop datasets. Our code, data and models are publicly available at https://github.com/GasolSun36/PyRAG.

Fast and reliable evaluation metrics are key to R&D progress. While traditional natural language generation metrics are fast, they are not very reliable. Conversely, new metrics based on large pretrained language models are much more reliable, but require significant computational resources. In this paper, we propose FrugalScore, an approach to learn a fixed, low cost version of any expensive NLG metric, while retaining most of its original performance. Experiments with BERTScore and MoverScore on summarization and translation show that FrugalScore is on par with the original metrics (and sometimes better), while having several orders of magnitude less parameters and running several times faster. On average over all learned metrics, tasks, and variants, FrugalScore retains 96.8% of the performance, runs 24 times faster, and has 35 times less parameters than the original metrics. We make our trained metrics publicly available, to benefit the entire NLP community and in particular researchers and practitioners with limited resources.

Pretrained transformer models have achieved state-of-the-art results in many tasks and benchmarks recently. Many state-of-the-art Language Models (LMs), however, do not scale well above the threshold of 512 input tokens. In specialized domains though (such as legal, scientific or biomedical), models often need to process very long text (sometimes well above 10000 tokens). Even though many efficient transformers have been proposed (such as Longformer, BigBird or FNet), so far, only very few such efficient models are available for specialized domains. Additionally, since the pretraining process is extremely costly in general - but even more so as the sequence length increases - it is often only in reach of large research labs. One way of making pretraining cheaper is the Replaced Token Detection (RTD) task, by providing more signal during training, since the loss can be computed over all tokens. In this work, we train Longformer models with the efficient RTD task on legal data to showcase that pretraining efficient LMs is possible using much less compute. We evaluate the trained models on challenging summarization tasks requiring the model to summarize long texts to show to what extent the models can achieve good performance on downstream tasks. We find that both the small and base models outperform their baselines on the in-domain BillSum and out-of-domain PubMed tasks in their respective parameter range. We publish our code and models for research purposes.

This paper focuses on monolithic Multimodal Large Language Models (MLLMs), which integrate visual encoding and language decoding into a single model. Existing structures and pre-training strategies for monolithic MLLMs often suffer from unstable optimization and catastrophic forgetting. To address these challenges, our key idea is to embed a new visual parameter space into a pre-trained LLM, enabling stable learning of visual knowledge from noisy data via delta tuning. Based on this principle, we first introduce Mono-InternVL, an advanced monolithic MLLM that incorporates a set of visual experts through a multimodal mixture-of-experts architecture. In addition, we design an innovative Endogenous Visual Pre-training (EViP) for Mono-InternVL to maximize its visual capabilities via progressive learning. Mono-InternVL achieves competitive performance against existing MLLMs but also leads to relatively expensive data cost. Therefore, we further present Mono-InternVL-1.5, a cheaper and stronger monolithic MLLM equipped with an improved EViP (EViP++). EViP++ introduces additional visual attention experts to Mono-InternVL-1.5 and re-organizes the pre-training process in an efficient manner. During inference, it includes a fused CUDA kernel to speed up its MoE operations. With these designs, Mono-InternVL-1.5 significantly reduces training and inference costs, while still maintaining competitive performance with Mono-InternVL. To evaluate our approach, we conduct extensive experiments across 15 benchmarks. Results demonstrate that Mono-InternVL outperforms existing monolithic MLLMs on 12 out of 15 benchmarks, e.g., +114-point improvement over Emu3 on OCRBench. Compared to its modular counterpart, i.e., InternVL-1.5, Mono-InternVL-1.5 achieves similar multimodal performance while reducing first-token latency by up to 69%. Code and models are released at https://github.com/OpenGVLab/Mono-InternVL.

Training modern deep learning models is increasingly constrained by GPU memory and compute limits. While Randomized Numerical Linear Algebra (RandNLA) offers proven techniques to compress these models, the lack of a unified, production-grade library prevents widely adopting these methods. We present Panther, a PyTorch-compatible library that consolidates established RandNLA algorithms into a single high-performance framework. Panther engineers efficient, drop-in replacements for standard components including sketched linear layers, 2D convolution, multi-head attention, and randomized matrix decompositions (such as pivoted CholeskyQR). By implementing a custom C++/CUDA backend (pawX), Panther provides an optimized implementation that can run on both CPUs and GPUs. We demonstrate the effectiveness of RandNLA techniques and Panther's ease of adoption. By replacing standard PyTorch linear layers with Panther layers (requiring only a few lines of code) we achieve significant memory savings (up to 75%) on BERT while maintaining comparable loss. Source code is available (MIT License) at https://github.com/FahdSeddik/panther, along with demonstration video at https://youtu.be/7M3RQb4KWxs.

We report a way to make a frozen small language model both more capable and dramatically cheaper at once, without changing any weights. Verified knowledge is deposited once as a byte-exact key-value (KV) state artifact and later restored, by graft, into a fresh inference context. The restore is bit-exact: under a pinned deterministic configuration, the grafted logits are byte-for-byte identical to a fresh computation (SHA-256 equality), with zero KL divergence and 100% argmax agreement over fifty samples. We show that own-position graft is the unique numerically exact operating point on a model with floating-point rotary encoding, and we verify byte-exactness on two model scales (12B, 31B) and two GPU targets, one through a pre-registered replay. On AIME 2025, a frozen Gemma-4-12B moves from 80.0% to 93.3% once a verified solution library is grafted, above its own 77.5% and its 31B sibling's 89.2% published anchors. On the recurring case, eight problems the base model never solves within a 401,026-token budget are answered from cached verified solutions in 61 total decode tokens, a factor of 6,574 fewer tokens and about 8,700x less energy; the capability claim proper rests on held-out transfer (7 of 7 at 31B). The same byte-exact store widens usable context from 32,768 to 2,854,766 tokens at zero extra accelerator memory, and moves byte-identical between machines of the same architecture. We describe the system at the behavior level; the engine is proprietary, and every reported number is backed by committed input and output hashes so the scoring can be re-checked without it.

We propose semantic entropy probes (SEPs), a cheap and reliable method for uncertainty quantification in Large Language Models (LLMs). Hallucinations, which are plausible-sounding but factually incorrect and arbitrary model generations, present a major challenge to the practical adoption of LLMs. Recent work by Farquhar et al. (2024) proposes semantic entropy (SE), which can detect hallucinations by estimating uncertainty in the space semantic meaning for a set of model generations. However, the 5-to-10-fold increase in computation cost associated with SE computation hinders practical adoption. To address this, we propose SEPs, which directly approximate SE from the hidden states of a single generation. SEPs are simple to train and do not require sampling multiple model generations at test time, reducing the overhead of semantic uncertainty quantification to almost zero. We show that SEPs retain high performance for hallucination detection and generalize better to out-of-distribution data than previous probing methods that directly predict model accuracy. Our results across models and tasks suggest that model hidden states capture SE, and our ablation studies give further insights into the token positions and model layers for which this is the case.

The rapid advancement of bug-finding techniques has led to the discovery of more vulnerabilities than developers can reasonably fix, creating an urgent need for effective Automated Program Repair (APR) methods. However, the complexity of modern bugs often makes precise root cause analysis difficult and unreliable. To address this challenge, we propose crash-site repair to simplify the repair task while still mitigating the risk of exploitation. In addition, we introduce a template-guided patch generation approach that significantly reduces the token cost of Large Language Models (LLMs) while maintaining both efficiency and effectiveness. We implement our prototype system, WILLIAMT, and evaluate it against state-of-the-art APR tools. Our results show that, when combined with the top-performing agent CodeRover-S, WILLIAMT reduces token cost by 45.9% and increases the bug-fixing rate to 73.5% (+29.6%) on ARVO, a ground-truth open source software vulnerabilities benchmark. Furthermore, we demonstrate that WILLIAMT can function effectively even without access to frontier LLMs: even a local model running on a Mac M4 Mini achieves a reasonable repair rate. These findings highlight the broad applicability and scalability of WILLIAMT.

This is a brief description of a project that has already autoformalized a large portion of the general topology from the Munkres textbook (which has in total 241 pages in 7 chapters and 39 sections). The project has been running since November 21, 2025 and has as of January 4, 2026, produced 160k lines of formalized topology. Most of it (about 130k lines) have been done in two weeks,from December 22 to January 4, for an LLM subscription cost of about \$100. This includes a 3k-line proof of Urysohn's lemma, a 2k-line proof of Urysohn's Metrization theorem, over 10k-line proof of the Tietze extension theorem, and many more (in total over 1.5k lemmas/theorems). The approach is quite simple and cheap: build a long-running feedback loop between an LLM and a reasonably fast proof checker equipped with a core foundational library. The LLM is now instantiated as ChatGPT (mostly 5.2) or Claude Sonnet (4.5) run through the respective Codex or Claude Code command line interfaces. The proof checker is Chad Brown's higher-order set theory system Megalodon, and the core library is Brown's formalization of basic set theory and surreal numbers (including reals, etc). The rest is some prompt engineering and technical choices which we describe here. Based on the fast progress, low cost, virtually unknown ITP/library, and the simple setup available to everyone, we believe that (auto)formalization may become quite easy and ubiquitous in 2026, regardless of which proof assistant is used.

Transformers trained on modular arithmetic exhibit sharp transitions between memorization, generalization, and collapse. We show that weight decay acts as a scalar empirical control parameter for these regimes, and introduce two cheap online diagnostics, mean pairwise attention-head cosine similarity and entropy standard deviation, that track training dynamics from attention activations alone and complement loss-landscape diagnostics at lower compute cost. Across eleven experimental conditions and three model scales (0.82M to 85M parameters), the weight-decay axis separates memorization, developmental grokking, and collapse. A near-transition logistic fit localizes the memorization-to-developmental boundary at λ_c=0.0158 (95% CI [0.0109, 0.0200], N=210); a power-law fit gives an empirical exponent ν=0.757 (CI [0.725, 0.799]). Reference exponents ν=1/2 and 3D Ising νapprox 0.63 lie outside this empirical CI under our four-bin grid, so we report ν as empirical and defer universality-class identification to denser finite-size-scaling work. A horizon-matched multi-task replication (n=280, four modular operations) preserves the weight-decay control pattern; a paired attention-head re-initialization experiment at λ=0.05 changes Phase-2 amplitude (Cohen's d=-1.190, n=10, p_t=4.5 times 10^{-3}), while matched weight-norm clipping does not. Three cross-architecture probes (4L MLP, 4L LSTM, and 4L Mamba; each n=70) replicate the weight-decay-controlled transition with architecture-specific λ_c values. Main diagnostic claims are scoped to modular arithmetic in small transformer attention models; the non-attention experiments are scope probes, and architecture-wide, language-model, and universality-class claims are out of scope.

Large language models (LLMs) can solve many narrow tasks, but querying them separately for millions of related instances can be prohibitively expensive. Can LLM agents autonomously create cheaper solutions for such workloads? We call this ability "bottling": the ability to turn general capabilities into task-specific solutions that balance answer quality and amortised cost. We introduce BOTTLED, a benchmark in which agents receive an entire unlabelled workload and must complete it under fixed time, compute and LLM API budgets. Agents choose their own approach, such as training a small model or writing a reusable program. Across ten models and three tasks, we find that strong zero-shot task performance does not reliably translate into strong bottling capabilities. Models with similar zero-shot scores can differ substantially after bottling, and 48 of 60 bottling runs score below the lower bound of the 95% confidence interval of their model's zero-shot performance. Moreover, 31 of 60 runs underperform the stronger of two small-model distillation baselines with the same token budget. Nevertheless, bottling can yield substantial savings: on query-product relevance classification, Opus 5 retains about 82% of its zero-shot macro-F1 at roughly 657 times lower reported cost. Bottling is also competitive with Jev, a "system one" model built especially for cheap, repetitive inference: Opus 5 on the same task recovers about 94% of Jev's macro-F1 at a quarter of Jev's projected full-workload cost. BOTTLED provides a basis for evaluating and improving agents' ability to invest limited resources in reusable solutions for large, repetitive workloads.

In conversational AI research, there's a noticeable trend towards developing models with a larger number of parameters, exemplified by models like ChatGPT. While these expansive models tend to generate increasingly better chat responses, they demand significant computational resources and memory. This study explores a pertinent question: Can a combination of smaller models collaboratively achieve comparable or enhanced performance relative to a singular large model? We introduce an approach termed "blending", a straightforward yet effective method of integrating multiple chat AIs. Our empirical evidence suggests that when specific smaller models are synergistically blended, they can potentially outperform or match the capabilities of much larger counterparts. For instance, integrating just three models of moderate size (6B/13B paramaeters) can rival or even surpass the performance metrics of a substantially larger model like ChatGPT (175B+ paramaters). This hypothesis is rigorously tested using A/B testing methodologies with a large user base on the Chai research platform over a span of thirty days. The findings underscore the potential of the "blending" strategy as a viable approach for enhancing chat AI efficacy without a corresponding surge in computational demands.

Large pretrained models can be used as annotators, helping replace or augment crowdworkers and enabling distilling generalist models into smaller specialist models. Unfortunately, this comes at a cost: employing top-of-the-line models often requires paying thousands of dollars for API calls, while the resulting datasets are static and challenging to audit. To address these challenges, we propose a simple alternative: rather than directly querying labels from pretrained models, we task models to generate programs that can produce labels. These programs can be stored and applied locally, re-used and extended, and cost orders of magnitude less. Our system, Alchemist, obtains comparable to or better performance than large language model-based annotation in a range of tasks for a fraction of the cost: on average, improvements amount to a 12.9% enhancement while the total labeling costs across all datasets are reduced by a factor of approximately 500x.

Vision foundation models achieve strong performance on both global and locally dense downstream tasks. Pretrained on large images, the recent DINOv3 model family is able to produce very fine-grained dense feature maps, enabling state-of-the-art performance. However, computing these feature maps requires the input image to be available at very high resolution, as well as large amounts of compute due to the squared complexity of the transformer architecture. To address these issues, we propose BRIXEL, a simple knowledge distillation approach that has the student learn to reproduce its own feature maps at higher resolution. Despite its simplicity, BRIXEL outperforms the baseline DINOv3 models by large margins on downstream tasks when the resolution is kept fixed. Moreover, it is able to produce feature maps that are very similar to those of the teacher at a fraction of the computational cost. Code and model weights are available at https://github.com/alexanderlappe/BRIXEL.

Developers and consumers increasingly choose reasoning language models (RLMs) based on their listed API prices. However, how accurately do these prices reflect actual inference costs? We conduct the first systematic study of this question, evaluating 8 frontier RLMs across 9 diverse tasks covering competition math, science QA, code generation, and multi-domain reasoning. We uncover the pricing reversal phenomenon: in 21.8% of model-pair comparisons, the model with a lower listed price actually incurs a higher total cost, with reversal magnitude reaching up to 28x. For example, Gemini 3 Flash's listed price is 78% cheaper than GPT-5.2's, yet its actual cost across all tasks is 22% higher. We trace the root cause to vast heterogeneity in thinking token consumption: on the same query, one model may use 900% more thinking tokens than another. In fact, removing thinking token costs reduces ranking reversals by 70% and raises the rank correlation (Kendall's τ ) between price and cost rankings from 0.563 to 0.873. We further show that per-query cost prediction is fundamentally difficult: repeated runs of the same query yield thinking token variation up to 9.7x, establishing an irreducible noise floor for any predictor. Our findings demonstrate that listed API pricing is an unreliable proxy for actual cost, calling for cost-aware model selection and transparent per-request cost monitoring.

Balancing performance and efficiency is a central challenge in large language model (LLM) advancement. GPT-5 addresses this with test-time routing, dynamically assigning queries to either an efficient or a high-capacity model during inference. In this work, we present Avengers-Pro, a test-time routing framework that ensembles LLMs of varying capacities and efficiencies, providing a unified solution for all performance-efficiency tradeoffs. The Avengers-Pro embeds and clusters incoming queries, then routes each to the most suitable model based on a performance-efficiency score. Across 6 challenging benchmarks and 8 leading models -- including GPT-5-medium, Gemini-2.5-pro, and Claude-opus-4.1 -- Avengers-Pro achieves state-of-the-art results: by varying a performance-efficiency trade-off parameter, it can surpass the strongest single model (GPT-5-medium) by +7% in average accuracy. Moreover, it can match the average accuracy of the strongest single model at 27% lower cost, and reach ~90% of that performance at 63% lower cost. Last but not least, it achieves a Pareto frontier, consistently yielding the highest accuracy for any given cost, and the lowest cost for any given accuracy, among all single models. Code is available at https://github.com/ZhangYiqun018/AvengersPro.

Frontier LLM agents are automating many business tasks, but their high inference cost makes large-scale deployment unsustainable. Small language models (SLMs) offer a cheaper alternative, yet they typically fall short when swapped into a harness designed for a frontier LLM. We show that for many routine business tasks, SLM agents can match LLM performance at 90% lower cost, when paired with an adapted harness that can be automatically discovered by a meta agent. The key insight is that much of the task difficulty is shared across instances and can be lifted from the model into the harness via tailored instructions, tools, and orchestration loops. To study this systematically, we create a framework that maps agent failure modes to harness adaptation strategies, and build a harness optimizer that automatically discovers effective adaptations from failure trajectories. Across seven business-oriented agentic tasks and three SLM families, we found optimized harnesses significantly improve performance on 16 of 21 task-SLM pairs, with seven pairs closing the SLM-LLM performance gap and the best SLM agent recovering 89.7% of LLM performance at 4% of the cost. Our analysis further shows that adaptation works best for tasks with more repetitive workflows and for SLMs with sufficient base capabilities. Together, these results suggest that harness adaptation can expand the practical deployment range of SLM agents in routine business tasks.

We present Platypus, a family of fine-tuned and merged Large Language Models (LLMs) that achieves the strongest performance and currently stands at first place in HuggingFace's Open LLM Leaderboard as of the release date of this work. In this work we describe (1) our curated dataset Open-Platypus, that is a subset of other open datasets and which we release to the public (2) our process of fine-tuning and merging LoRA modules in order to conserve the strong prior of pretrained LLMs, while bringing specific domain knowledge to the surface (3) our efforts in checking for test data leaks and contamination in the training data, which can inform future research. Specifically, the Platypus family achieves strong performance in quantitative LLM metrics across model sizes, topping the global Open LLM leaderboard while using just a fraction of the fine-tuning data and overall compute that are required for other state-of-the-art fine-tuned LLMs. In particular, a 13B Platypus model can be trained on a single A100 GPU using 25k questions in 5 hours. This is a testament of the quality of our Open-Platypus dataset, and opens opportunities for more improvements in the field. Project page: https://platypus-llm.github.io

Effectively configuring scalable large language model (LLM) experiments, spanning architecture design, hyperparameter tuning, and beyond, is crucial for advancing LLM research, as poor configuration choices can waste substantial computational resources and prevent models from realizing their full potential. Prior automated methods are designed for low-cost settings where repeated trial and error is feasible, but scalable LLM experiments are too expensive for such extensive iteration. To our knowledge, no work has addressed the automation of high-cost LLM experiment configurations, leaving this problem labor-intensive and dependent on expert intuition. Motivated by this gap, we propose AutoLLMResearch, an agentic framework that mimics how human researchers learn generalizable principles from low-fidelity experiments and extrapolate to efficiently identify promising configurations in expensive LLM settings. The core challenge is how to enable an agent to learn, through interaction with a multi-fidelity experimental environment that captures the structure of the LLM configuration landscape. To achieve this, we propose a systematic framework with two key components: 1) LLMConfig-Gym, a multi-fidelity environment encompassing four critical LLM experiment tasks, supported by over one million GPU hours of verifiable experiment outcomes; 2) A structured training pipeline that formulates configuration research as a long-horizon Markov Decision Process and accordingly incentivizes cross-fidelity extrapolation reasoning. Extensive evaluation against diverse strong baselines on held-out experiments demonstrates the effectiveness, generalization, and interpretability of our framework, supporting its potential as a practical and general solution for scalable real-world LLM experiment automation.

We present an algorithm for minimizing an objective with hard-to-compute gradients by using a related, easier-to-access function as a proxy. Our algorithm is based on approximate proximal point iterations on the proxy combined with relatively few stochastic gradients from the objective. When the difference between the objective and the proxy is delta-smooth, our algorithm guarantees convergence at a rate matching stochastic gradient descent on a delta-smooth objective, which can lead to substantially better sample efficiency. Our algorithm has many potential applications in machine learning, and provides a principled means of leveraging synthetic data, physics simulators, mixed public and private data, and more.

Few-shot in-context learning (ICL) enables pre-trained language models to perform a previously-unseen task without any gradient-based training by feeding a small number of training examples as part of the input. ICL incurs substantial computational, memory, and storage costs because it involves processing all of the training examples every time a prediction is made. Parameter-efficient fine-tuning (PEFT) (e.g. adapter modules, prompt tuning, sparse update methods, etc.) offers an alternative paradigm where a small set of parameters are trained to enable a model to perform the new task. In this paper, we rigorously compare few-shot ICL and PEFT and demonstrate that the latter offers better accuracy as well as dramatically lower computational costs. Along the way, we introduce a new PEFT method called (IA)^3 that scales activations by learned vectors, attaining stronger performance while only introducing a relatively tiny amount of new parameters. We also propose a simple recipe based on the T0 model called T-Few that can be applied to new tasks without task-specific tuning or modifications. We validate the effectiveness of T-Few on completely unseen tasks by applying it to the RAFT benchmark, attaining super-human performance for the first time and outperforming the state-of-the-art by 6% absolute. All of the code used in our experiments is publicly available.

Leveraging recent advancements in large language models, modern neural code completion models have demonstrated the capability to generate highly accurate code suggestions. However, their massive size poses challenges in terms of computational costs and environmental impact, hindering their widespread adoption in practical scenarios. Dynamic inference emerges as a promising solution, as it allocates minimal computation during inference while maintaining the model's performance. In this research, we explore dynamic inference within the context of code completion. Initially, we conducted an empirical investigation on GPT-2, focusing on the inference capabilities of intermediate layers for code completion. We found that 54.4% of tokens can be accurately generated using just the first layer, signifying significant computational savings potential. Moreover, despite using all layers, the model still fails to predict 14.5% of tokens correctly, and the subsequent completions continued from them are rarely considered helpful, with only a 4.2% Acceptance Rate. These findings motivate our exploration of dynamic inference in code completion and inspire us to enhance it with a decision-making mechanism that stops the generation of incorrect code. We thus propose a novel dynamic inference method specifically tailored for code completion models. This method aims not only to produce correct predictions with largely reduced computation but also to prevent incorrect predictions proactively. Our extensive evaluation shows that it can averagely skip 1.7 layers out of 16 layers in the models, leading to an 11.2% speedup with only a marginal 1.1% reduction in ROUGE-L.

While Retrieval Augmented Generation (RAG) has emerged as a popular technique for improving Large Language Model (LLM) systems, it introduces a large number of choices, parameters and hyperparameters that must be made or tuned. This includes the LLM, embedding, and ranker models themselves, as well as hyperparameters governing individual RAG components. Yet, collectively optimizing the entire configuration in a RAG or LLM system remains under-explored - especially in multi-objective settings - due to intractably large solution spaces, noisy objective evaluations, and the high cost of evaluations. In this work, we introduce the first approach for multi-objective parameter optimization of cost, latency, safety and alignment over entire LLM and RAG systems. We find that Bayesian optimization methods significantly outperform baseline approaches, obtaining a superior Pareto front on two new RAG benchmark tasks. We conclude our work with important considerations for practitioners who are designing multi-objective RAG systems, highlighting nuances such as how optimal configurations may not generalize across tasks and objectives.

Prediction APIs offered for a fee are a fast-growing industry and an important part of machine learning as a service. While many such services are available, the heterogeneity in their price and performance makes it challenging for users to decide which API or combination of APIs to use for their own data and budget. We take a first step towards addressing this challenge by proposing FrugalML, a principled framework that jointly learns the strength and weakness of each API on different data, and performs an efficient optimization to automatically identify the best sequential strategy to adaptively use the available APIs within a budget constraint. Our theoretical analysis shows that natural sparsity in the formulation can be leveraged to make FrugalML efficient. We conduct systematic experiments using ML APIs from Google, Microsoft, Amazon, IBM, Baidu and other providers for tasks including facial emotion recognition, sentiment analysis and speech recognition. Across various tasks, FrugalML can achieve up to 90% cost reduction while matching the accuracy of the best single API, or up to 5% better accuracy while matching the best API's cost.

We propose a fully automatic annotation scheme that takes a raw 3D point cloud with a set of fitted CAD models as input and outputs convincing point-wise labels that can be used as cheap training data for point cloud segmentation. Compared with manual annotations, we show that our automatic labels are accurate while drastically reducing the annotation time and eliminating the need for manual intervention or dataset-specific parameters. Our labeling pipeline outputs semantic classes and soft point-wise object scores, which can either be binarized into standard one-hot-encoded labels, thresholded into weak labels with ambiguous points left unlabeled, or used directly as soft labels during training. We evaluate the label quality and segmentation performance of PointNet++ on a dataset of real industrial point clouds and Scan2CAD, a public dataset of indoor scenes. Our results indicate that reducing supervision in areas that are more difficult to label automatically is beneficial compared with the conventional approach of naively assigning a hard "best guess" label to every point.

As Transfer Learning from large-scale pre-trained models becomes more prevalent in Natural Language Processing (NLP), operating these large models in on-the-edge and/or under constrained computational training or inference budgets remains challenging. In this work, we propose a method to pre-train a smaller general-purpose language representation model, called DistilBERT, which can then be fine-tuned with good performances on a wide range of tasks like its larger counterparts. While most prior work investigated the use of distillation for building task-specific models, we leverage knowledge distillation during the pre-training phase and show that it is possible to reduce the size of a BERT model by 40%, while retaining 97% of its language understanding capabilities and being 60% faster. To leverage the inductive biases learned by larger models during pre-training, we introduce a triple loss combining language modeling, distillation and cosine-distance losses. Our smaller, faster and lighter model is cheaper to pre-train and we demonstrate its capabilities for on-device computations in a proof-of-concept experiment and a comparative on-device study.

A large language model can only use the text that fits in its context window, and it recomputes its internal key-value (KV) state for a prompt every time the prompt is sent. We test a memory layer, the public package galahad-kv, that saves the KV state of each block of about 16,000 tokens to encrypted local NVMe disk and loads it back later, byte-exact, without recomputing it. We ran it on 50,000,000 tokens of real public text, served through vLLM on one NVIDIA H100, with Gemma 4 12B and Gemma 4 31B. Every block we probed was loaded back from the encrypted store with no recompute (100 of 100, at depths from 0 to 50M tokens) on both models. Loading a block was 2.8x to 4.3x faster than recomputing it and used 8.8x to 12.3x less GPU energy, and GPU memory stayed flat over the whole 50M-token stream. Asked about facts planted millions of tokens earlier, the 12B model gave the right answer 82 times out of 100 and the 31B model 98 times out of 100. Neither model made up an answer. The limits are as follows. This is reuse of stored state, not a wider attention window: one block is loaded at a time, and how well a question is answered depends on the model. Writing the memory is a one-time cost, and the store takes terabytes of local NVMe disk. We describe the test protocol, which is built to resist common ways of gaming long-context benchmarks, and give a single-GPU reproduction that uses public software and a free licence for the package.

A dramatic influx of diffusion-generated images has marked recent years, posing unique challenges to current detection technologies. While the task of identifying these images falls under binary classification, a seemingly straightforward category, the computational load is significant when employing the "reconstruction then compare" technique. This approach, known as DIRE (Diffusion Reconstruction Error), not only identifies diffusion-generated images but also detects those produced by GANs, highlighting the technique's broad applicability. To address the computational challenges and improve efficiency, we propose distilling the knowledge embedded in diffusion models to develop rapid deepfake detection models. Our approach, aimed at creating a small, fast, cheap, and lightweight diffusion synthesized deepfake detector, maintains robust performance while significantly reducing operational demands. Maintaining performance, our experimental results indicate an inference speed 3.2 times faster than the existing DIRE framework. This advance not only enhances the practicality of deploying these systems in real-world settings but also paves the way for future research endeavors that seek to leverage diffusion model knowledge.

Major advancements in the capabilities of computer vision models have been primarily fueled by rapid expansion of datasets, model parameters, and computational budgets, leading to ever-increasing demands on computational infrastructure. However, as these models are deployed in increasingly diverse and resource-constrained environments, there is a pressing need for architectures that can deliver high performance while requiring fewer computational resources. This dissertation focuses on architectural principles through which models can achieve increased performance while reducing their computational demands. We discuss strides towards this goal through three directions. First, we focus on data ingress and egress, investigating how information may be passed into and retrieved from our core neural processing units. This ensures that our models make the most of available data, allowing smaller architectures to become more performant. Second, we investigate modifications to the core neural architecture, applied to restricted attention in vision transformers. This section explores how removing uniform context windows in restricted attention increases the expressivity of the underlying neural architecture. Third, we explore the natural structures of Normalizing Flows and how we can leverage these properties to better distill model knowledge. These contributions demonstrate that careful design of neural architectures can increase the efficiency of machine learning algorithms, allowing them to become smaller, faster, and cheaper.