Daily Papers

While decoupled control schemes for legged mobile manipulators have shown robustness, learning holistic whole-body control policies for tracking global end-effector poses remains fragile against Out-of-Distribution (OOD) inputs induced by sensor noise or infeasible user commands. To improve robustness against these perturbations without sacrificing task performance and continuity, we propose Competence Manifold Projection (CMP). Specifically, we utilize a Frame-Wise Safety Scheme that transforms the infinite-horizon safety constraint into a computationally efficient single-step manifold inclusion. To instantiate this competence manifold, we employ a Lower-Bounded Safety Estimator that distinguishes unmastered intentions from the training distribution. We then introduce an Isomorphic Latent Space (ILS) that aligns manifold geometry with safety probability, enabling efficient O(1) seamless defense against arbitrary OOD intents. Experiments demonstrate that CMP achieves up to a 10-fold survival rate improvement in typical OOD scenarios where baselines suffer catastrophic failure, incurring under 10% tracking degradation. Notably, the system exhibits emergent ``best-effort'' generalization behaviors to progressively accomplish OOD goals by adhering to the competence boundaries. Result videos are available at: https://shepherd1226.github.io/CMP.

Spatial competence is the quality of maintaining a consistent internal representation of an environment and using it to infer discrete structure and plan actions under constraints. Prevailing spatial evaluations for large models are limited to probing isolated primitives through 3D transformations or visual question answering. We introduce the Spatial Competence Benchmark (SCBench), spanning three hierarchical capability buckets whose tasks require executable outputs verified by deterministic checkers or simulator-based evaluators. On SCBench, three frontier models exhibit monotonically decreasing accuracy up the capability ladder. Sweeping output-token caps shows that accuracy gains concentrate at low budgets and saturate quickly, and failures are dominated by locally plausible geometry that breaks global constraints. We release the task generators, verifiers, and visualisation tooling.

We propose a new approach for generative modeling based on training a neural network to be idempotent. An idempotent operator is one that can be applied sequentially without changing the result beyond the initial application, namely f(f(z))=f(z). The proposed model f is trained to map a source distribution (e.g, Gaussian noise) to a target distribution (e.g. realistic images) using the following objectives: (1) Instances from the target distribution should map to themselves, namely f(x)=x. We define the target manifold as the set of all instances that f maps to themselves. (2) Instances that form the source distribution should map onto the defined target manifold. This is achieved by optimizing the idempotence term, f(f(z))=f(z) which encourages the range of f(z) to be on the target manifold. Under ideal assumptions such a process provably converges to the target distribution. This strategy results in a model capable of generating an output in one step, maintaining a consistent latent space, while also allowing sequential applications for refinement. Additionally, we find that by processing inputs from both target and source distributions, the model adeptly projects corrupted or modified data back to the target manifold. This work is a first step towards a ``global projector'' that enables projecting any input into a target data distribution.

We tackle the problem disentangling the latent space of an autoencoder in order to separate labelled attribute information from other characteristic information. This then allows us to change selected attributes while preserving other information. Our method, matrix subspace projection, is much simpler than previous approaches to latent space factorisation, for example not requiring multiple discriminators or a careful weighting among their loss functions. Furthermore our new model can be applied to autoencoders as a plugin, and works across diverse domains such as images or text. We demonstrate the utility of our method for attribute manipulation in autoencoders trained across varied domains, using both human evaluation and automated methods. The quality of generation of our new model (e.g. reconstruction, conditional generation) is highly competitive to a number of strong baselines.

Automated personality and soft skill assessment from multimodal behavioral data remains challenging due to limited datasets and methods that fail to capture geometric structure inherent in human traits. We introduce RecruitView, a dataset of 2,011 naturalistic video interview clips from 300+ participants with 27,000 pairwise comparative judgments across 12 dimensions: Big Five personality traits, overall personality score, and six interview performance metrics. To leverage this data, we propose Cross-Modal Regression with Manifold Fusion (CRMF), a geometric deep learning framework that explicitly models behavioral representations across hyperbolic, spherical, and Euclidean manifolds. CRMF employs geometry-specific expert networks to capture hierarchical trait structures, directional behavioral patterns, and continuous performance variations simultaneously. An adaptive routing mechanism dynamically weights expert contributions based on input characteristics. Through principled tangent space fusion, CRMF achieves superior performance while training 40-50% fewer trainable parameters than large multimodal models. Extensive experiments demonstrate that CRMF substantially outperforms the selected baselines, achieving up to 11.4% improvement in Spearman correlation and 6.0% in concordance index. Our RecruitView dataset is publicly available at https://huggingface.co/datasets/AI4A-lab/RecruitView

We investigate whether post-trained capabilities can be transferred across models without retraining, with a focus on transfer across different model scales. We propose the Master Key Hypothesis, which states that model capabilities correspond to directions in a low-dimensional latent subspace that induce specific behaviors and are transferable across models through linear alignment. Based on this hypothesis, we introduce UNLOCK, a training-free and label-free framework that extracts a capability direction by contrasting activations between capability-present and capability-absent Source variants, aligns it with a Target model through a low-rank linear transformation, and applies it at inference time to elicit the behavior. Experiments on reasoning behaviors, including Chain-of-Thought (CoT) and mathematical reasoning, demonstrate substantial improvements across model scales without training. For example, transferring CoT reasoning from Qwen1.5-14B to Qwen1.5-7B yields an accuracy gain of 12.1% on MATH, and transferring a mathematical reasoning direction from Qwen3-4B-Base to Qwen3-14B-Base improves AGIEval Math accuracy from 61.1% to 71.3%, surpassing the 67.8% achieved by the 14B post-trained model. Our analysis shows that the success of transfer depends on the capabilities learned during pre-training, and that our intervention amplifies latent capabilities by sharpening the output distribution toward successful reasoning trajectories.

The efficient coding hypothesis proposes that the response properties of sensory systems are adapted to the statistics of their inputs such that they capture maximal information about the environment, subject to biological constraints. While elegant, information theoretic properties are notoriously difficult to measure in practical settings or to employ as objective functions in optimization. This difficulty has necessitated that computational models designed to test the hypothesis employ several different information metrics ranging from approximations and lower bounds to proxy measures like reconstruction error. Recent theoretical advances have characterized a novel and ecologically relevant efficiency metric, the manifold capacity, which is the number of object categories that may be represented in a linearly separable fashion. However, calculating manifold capacity is a computationally intensive iterative procedure that until now has precluded its use as an objective. Here we outline the simplifying assumptions that allow manifold capacity to be optimized directly, yielding Maximum Manifold Capacity Representations (MMCR). The resulting method is closely related to and inspired by advances in the field of self supervised learning (SSL), and we demonstrate that MMCRs are competitive with state of the art results on standard SSL benchmarks. Empirical analyses reveal differences between MMCRs and representations learned by other SSL frameworks, and suggest a mechanism by which manifold compression gives rise to class separability. Finally we evaluate a set of SSL methods on a suite of neural predictivity benchmarks, and find MMCRs are higly competitive as models of the ventral stream.

Matrix manifolds, such as manifolds of Symmetric Positive Definite (SPD) matrices and Grassmann manifolds, appear in many applications. Recently, by applying the theory of gyrogroups and gyrovector spaces that is a powerful framework for studying hyperbolic geometry, some works have attempted to build principled generalizations of Euclidean neural networks on matrix manifolds. However, due to the lack of many concepts in gyrovector spaces for the considered manifolds, e.g., the inner product and gyroangles, techniques and mathematical tools provided by these works are still limited compared to those developed for studying hyperbolic geometry. In this paper, we generalize some notions in gyrovector spaces for SPD and Grassmann manifolds, and propose new models and layers for building neural networks on these manifolds. We show the effectiveness of our approach in two applications, i.e., human action recognition and knowledge graph completion.

Intelligent agents progress by continually refining their capabilities through actively exploring environments. Yet robot policies often lack sufficient exploration capability due to action mode collapse. Existing methods that encourage exploration typically rely on random perturbations, which are unsafe and induce unstable, erratic behaviors, thereby limiting their effectiveness. We propose Self-Improvement via On-Manifold Exploration (SOE), a framework that enhances policy exploration and improvement in robotic manipulation. SOE learns a compact latent representation of task-relevant factors and constrains exploration to the manifold of valid actions, ensuring safety, diversity, and effectiveness. It can be seamlessly integrated with arbitrary policy models as a plug-in module, augmenting exploration without degrading the base policy performance. Moreover, the structured latent space enables human-guided exploration, further improving efficiency and controllability. Extensive experiments in both simulation and real-world tasks demonstrate that SOE consistently outperforms prior methods, achieving higher task success rates, smoother and safer exploration, and superior sample efficiency. These results establish on-manifold exploration as a principled approach to sample-efficient policy self-improvement. Project website: https://ericjin2002.github.io/SOE

Representing a manifold of very high-dimensional data with generative models has been shown to be computationally efficient in practice. However, this requires that the data manifold admits a global parameterization. In order to represent manifolds of arbitrary topology, we propose to learn a mixture model of variational autoencoders. Here, every encoder-decoder pair represents one chart of a manifold. We propose a loss function for maximum likelihood estimation of the model weights and choose an architecture that provides us the analytical expression of the charts and of their inverses. Once the manifold is learned, we use it for solving inverse problems by minimizing a data fidelity term restricted to the learned manifold. To solve the arising minimization problem we propose a Riemannian gradient descent algorithm on the learned manifold. We demonstrate the performance of our method for low-dimensional toy examples as well as for deblurring and electrical impedance tomography on certain image manifolds.

Training tool-use agents typically relies on outcome-based filtering: Supervised Fine-Tuning (SFT) on successful trajectories and Reinforcement Learning (RL) on pass-rate-selected tasks. However, this paradigm ignores interaction dynamics: successful trajectories may lack error recovery or exhibit redundancy, while pass rates fail to distinguish structurally informative tasks from trivial ones. We propose TopoCurate, an interaction-aware framework that projects multi-trial rollouts from the same task into a unified semantic quotient topology. By merging equivalent action-observation states, this projection transforms scattered linear trajectories into a structured manifold that explicitly captures how tool invocations and environmental responses drive the divergence between effective strategies and failure modes. Leveraging this representation, we introduce a dual-selection mechanism: for SFT, we prioritize trajectories demonstrating reflective recovery, semantic efficiency, and strategic diversity to mitigate covariate shift and mode collapse; for RL, we select tasks with high error branch ratios and strategic heterogeneity, maximizing gradient Signal-to-Noise Ratio to address vanishing signals in sparse-reward settings. Evaluations on BFCLv3 and Tau2 Bench show that TopoCurate achieves consistent gains of 4.2\% (SFT) and 6.9\% (RL) over state-of-the-art baselines. We will release the code and data soon for further investigations.

Generalization, the ability to perform well beyond the training context, is a hallmark of biological and artificial intelligence, yet anticipating unseen failures remains a central challenge. Conventional approaches often take a ``bottom-up'' mechanistic route by reverse-engineering interpretable features or circuits to build explanatory models. While insightful, these methods often struggle to provide the high-level, predictive signals for anticipating failure in real-world deployment. Here, we propose using a ``top-down'' approach to studying generalization failures inspired by medical biomarkers: identifying system-level measurements that serve as robust indicators of a model's future performance. Rather than mapping out detailed internal mechanisms, we systematically design and test network markers to probe structure, function links, identify prognostic indicators, and validate predictions in real-world settings. In image classification, we find that task-relevant geometric properties of in-distribution (ID) object manifolds consistently forecast poor out-of-distribution (OOD) generalization. In particular, reductions in two geometric measures, effective manifold dimensionality and utility, predict weaker OOD performance across diverse architectures, optimizers, and datasets. We apply this finding to transfer learning with ImageNet-pretrained models. We consistently find that the same geometric patterns predict OOD transfer performance more reliably than ID accuracy. This work demonstrates that representational geometry can expose hidden vulnerabilities, offering more robust guidance for model selection and AI interpretability.

Pretraining methods are typically compared by evaluating the accuracy of linear classifiers, transfer learning performance, or visually inspecting the representation manifold's (RM) lower-dimensional projections. We show that the differences between methods can be understood more clearly by investigating the RM directly, which allows for a more detailed comparison. To this end, we propose a framework and new metric to measure and compare different RMs. We also investigate and report on the RM characteristics for various pretraining methods. These characteristics are measured by applying sequentially larger local alterations to the input data, using white noise injections and Projected Gradient Descent (PGD) adversarial attacks, and then tracking each datapoint. We calculate the total distance moved for each datapoint and the relative change in distance between successive alterations. We show that self-supervised methods learn an RM where alterations lead to large but constant size changes, indicating a smoother RM than fully supervised methods. We then combine these measurements into one metric, the Representation Manifold Quality Metric (RMQM), where larger values indicate larger and less variable step sizes, and show that RMQM correlates positively with performance on downstream tasks.

Large-scale image generation has benefited from advances in data scale, quality, rebalancing, and recaptioning, yet conventional pipelines typically optimize task-specific datasets in isolation. A central challenge is not only how to curate each task-specific corpus, but also how to organize heterogeneous supervision according to the dependencies among generative capabilities. We present a capability-driven data infrastructure that couples capability-specific supervision construction with capability-aligned curriculum scheduling. Its three specialized yet interoperable data engines build complementary relational supervision for text-image grounding, inter-image transformation, and image-knowledge association, while caption experts align T2I and editing supervision across tasks and granularities. A multi-stage curriculum jointly evolves task composition, visual-concept distribution, data quality, and image resolution along the dependency order of capability acquisition, with capability-aware evaluation closing the loop through targeted retrieval, expert construction, and gap-aware resampling. At scale, the framework curates a 440M-image T2I corpus, 120M editing pairs, and over 27M image-entity pairs. With this infrastructure, we train multimodal diffusion models at two scales from scratch, with 3B and 6B sizes respectively. We conduct quantitative evaluation on CPI-Bench, along with qualitative evaluations across diverse text-to-image and editing scenarios. Experimental results present broad visual coverage, versatile rendering, and effective transfer across generative capabilities.

Regulating the latent space to an isotropic Gaussian distribution provides a stable and information-maximized landscape for world model planning. However, the latent space property and successful planning remain disconnected. We first study this by comparing SIGReg and VISReg, two regularization loss functions with the same distribution target but different properties. Compared with SIGReg, VISReg has more flexibility in controlling the weights of center, scale, and shape regularization, and a larger batch size brings a finer distribution approximation. We find that the former, despite being beneficial in self-supervised learning (SSL), does not help the planning, whereas the latter improves the planning success on out-of-domain (OOD) datasets. This motivates a deep understanding of the factors that correlate with the success rate. Unlike the previous metrics focusing on the encoded latent only, we propose the Veracity-Influence-Sobriety score (VIScore), a metric that quantifies the reachability and capacity of a predictor given the encoded feature, and the hallucination of the searching-based planner. Compared with straightness, physical-state probing, and empowerment, we show that, with the measurement covering encoder, predictor, and planner, VIScore explains the success rate better than the others, as reflected by a strong Spearman correlation. Specifically, VIScore consistently achieves a Spearman correlation over 0.75 on both seen and unseen models and datasets on the cross-task success rate pool. Moreover, VIScore is the only metric that has a calibration error below the constant fit across all testing scenarios, showcasing the importance of these three aspects in planning success. We hope this metric can help future studies on world model design and diagnosis.

Understanding how Large Language Models (LLMs) perform complex reasoning and their failure mechanisms is a challenge in interpretability research. To provide a measurable geometric analysis perspective, we define the concept of the Reasoning Manifold, a latent low-dimensional geometric structure formed by the internal representations corresponding to all correctly reasoned generations. This structure can be conceptualized as the embodiment of the effective thinking paths that the model has learned to successfully solve a given task. Based on this concept, we build REMA, a framework that explains the origins of failures by quantitatively comparing the spatial relationships of internal model representations corresponding to both erroneous and correct reasoning samples. Specifically, REMA first quantifies the geometric deviation of each erroneous representation by calculating its k-nearest neighbors distance to the approximated manifold formed by correct representations, thereby providing a unified failure signal. It then localizes the divergence points where these deviations first become significant by tracking this deviation metric across the model's layers and comparing it against a baseline of internal fluctuations from correct representations, thus identifying where the reasoning chain begins to go off-track. Our extensive experiments on diverse language and multimodal models and tasks demonstrate the low-dimensional nature of the reasoning manifold and the high separability between erroneous and correct reasoning representations. The results also validate the effectiveness of the REMA framework in analyzing the origins of reasoning failures. This research connects abstract reasoning failures to measurable geometric deviations in representations, providing new avenues for in-depth understanding and diagnosis of the internal computational processes of black-box models.

We investigate whether independently trained language models converge to geometrically compatible latent representations, and whether this compatibility can be exploited to correct model behavior at inference time without any weight updates. We learn a linear projection matrix that maps activation vectors from a large teacher model into the coordinate system of a smaller student model, then intervene on the student's residual stream during generation by substituting its internal state with the translated teacher representation. Across a fully crossed experimental matrix of 20 heterogeneous teacher-student pairings spanning mixture-of-experts, dense, code-specialized, and synthetically trained architectures, the Ridge projection consistently achieves R^2 = 0.50 on verbal reasoning and R^2 = 0.40 on mathematical reasoning, collapsing to R^2 = -0.22 under permutation control and R^2 = 0.01 under L_1 regularization. Behavioral correction rates range from 14.0% to 50.0% on TruthfulQA (mean 25.2%) and from 8.5% to 43.3% on GSM8K arithmetic reasoning (mean 25.5%), demonstrating that the method generalizes across fundamentally different reasoning domains. We report a near-zero correlation between geometric alignment quality and behavioral correction rate (r = -0.07), revealing a dissociation between representation space fidelity and output space impact. Intervention strength is architecture-specific: student models exhibit characteristic sensitivity profiles that invert across domains, with the most steerable verbal student becoming the least steerable mathematical student. Finally, a double dissociation experiment conducted across all 20 model pairings confirms without exception that projection matrices collapse catastrophically when transferred across reasoning domains (mean R^2 = -3.83 in both transfer directions), establishing domain-specific subspace geometry as a universal property of LMs.

Scaling vision-language models into Visual Multiagent Systems (VMAS) is hindered by two coupled issues. First, communication topologies are fixed before inference, leaving them blind to visual content and query context; second, agent reasoning abilities remain static during deployment. These issues reinforce each other: a rigid topology fails to leverage richer agent expertise, while static agents lack incentives to specialize for a given query. We address this with SkillGraph, a joint framework that evolves both agent expertise and communication topology. Within this framework, a Multimodal Graph Transformer (MMGT) encodes visual tokens, instruction semantics and active skill embeddings to predict a query-conditioned collaboration graph, replacing hand-crafted routing with dynamic, content-aware information flow. Complementing this, a Skill Designer distills and refines reasoning heuristics from failure cases, constructing a self-evolving multimodal Skill Bank. Crucially, updated skill embeddings are fed back into the MMGT, enabling the topology to adapt alongside capability growth. Experiments show that SkillGraph achieves consistent improvements across four benchmarks, five common MAS structures and four base models. Code is available at https://github.com/niez233/skillgraph.

Background: The deployment of personalized Large Language Models (LLMs) is currently constrained by the stability-plasticity dilemma. Prevailing alignment methods, such as Supervised Fine-Tuning (SFT), rely on stochastic weight updates that often incur an "alignment tax" -- degrading general reasoning capabilities. Methods: We propose the Soul Engine, a framework based on the Linear Representation Hypothesis, which posits that personality traits exist as orthogonal linear subspaces. We introduce SoulBench, a dataset constructed via dynamic contextual sampling. Using a dual-head architecture on a frozen Qwen-2.5 base, we extract disentangled personality vectors without modifying the backbone weights. Results: Our experiments demonstrate three breakthroughs. First, High-Precision Profiling: The model achieves a Mean Squared Error (MSE) of 0.011 against psychological ground truth. Second, Geometric Orthogonality: T-SNE visualization confirms that personality manifolds are distinct and continuous, allowing for "Zero-Shot Personality Injection" that maintains original model intelligence. Third, Deterministic Steering: We achieve robust control over behavior via vector arithmetic, validated through extensive ablation studies. Conclusion: This work challenges the necessity of fine-tuning for personalization. By transitioning from probabilistic prompting to deterministic latent intervention, we provide a mathematically rigorous foundation for safe, controllable AI personalization.

The manifold hypothesis, which assumes that data lies on or close to an unknown manifold of low intrinsic dimension, is a staple of modern machine learning research. However, recent work has shown that real-world data exhibits distinct non-manifold structures, i.e. singularities, that can lead to erroneous findings. Detecting such singularities is therefore crucial as a precursor to interpolation and inference tasks. We address this issue by developing a topological framework that (i) quantifies the local intrinsic dimension, and (ii) yields a Euclidicity score for assessing the 'manifoldness' of a point along multiple scales. Our approach identifies singularities of complex spaces, while also capturing singular structures and local geometric complexity in image data.

A prevalent assumption in LLM agent deployment holds that more structured harnesses universally improve reliability, and that higher-capability models need proportionally less structural guidance -- together implying a monotone inverse relationship between model capability tier and optimal harness complexity. We test this hypothesis through a controlled 432-run experiment crossing six models across four capability tiers with three harness conditions (light, balanced, strict) on HEAT-24, a 24-task synthetic benchmark with git-based workspace verification. Our results refute the monotone inverse relationship on two fronts. First, for the frontier chat model evaluated (Gemini 2.5 Flash), increased harness verbosity lowers VTSR by 29-38 percentage points -- a harness-complexity paradox. Second, for the frontier reasoning model evaluated (Qwen3.5-122B, extended thinking enabled), strict harness achieves the highest VTSR (91.7%) and the lowest latency, the opposite of the prediction. Within the constrained tier, a 2B model (Gemma4:e2B) matches strong-open-tier stability at 91.7% across all harnesses. Because each tier is represented by a single model in this study, these results should be interpreted as model-specific observations; harness sensitivity appears non-monotone across the models evaluated, and depends critically on model type (chat vs. reasoning). We introduce a six-label failure taxonomy showing that format_violation dominates capable-model failures while wrong_file dominates low-capability failures, and we derive practical tier-aware harness selection guidelines.

Boundary representation (B-Rep) generation is a fundamental task in computer-aided design, yet the direct synthesis of high-fidelity and structurally valid B-Reps remains a major challenge. Existing deep generative methods suffer from two forms of brittleness: representation brittleness, caused by padding noise and feature contamination in the latent space, and generation brittleness, stemming from sequential error propagation and a train-inference mismatch due to non-differentiable validity enforcement. We propose HiFi-BRep, a novel framework that addresses these limitations through two synergistic contributions. First, a topology-aware encoder constructs a high-fidelity latent representation by eliminating padding via learnable queries and preventing feature contamination with topology-guided attention. Second, a single-stage decoder jointly predicts geometry and topology in parallel, embedding core manifold constraints as a differentiable learning objective. This design ensures mutual guidance between geometry and topology while avoiding cascaded errors. Extensive experiments show that HiFi-BRep significantly outperforms state-of-the-art methods in both structural validity and geometric fidelity, providing a robust solution for high-quality B-Rep synthesis. Code and models are publicly available at https://github.com/1nnoh/HiFi-BRep.

Large language models (LLMs) generalize smoothly across continuous semantic spaces, yet strict logical reasoning demands the formation of discrete decision boundaries. Prevailing theories relying on linear isometric projections fail to resolve this fundamental tension. In this work, we argue that task context operates as a non-isometric dynamical operator that enforces a necessary "topological distortion." By applying Gram-Schmidt decomposition to residual-stream activations , we reveal a dual-modulation mechanism driving this process: a class-agnostic topological preservation that anchors global structure to prevent semantic collapse, and a specific algebraic divergence that directionally tears apart cross-class concepts to forge logical boundaries. We validate this geometric evolution across a gradient of tasks, from simple mapping to complex primality testing. Crucially, targeted specific vector ablation establishes a strict causal binding between this topology and model function: algebraically erasing the divergence component collapses parity classification accuracy from 100% to chance levels (38.57%). Furthermore, we uncover a three-phase layer-wise geometric dynamic and demonstrate that under social pressure prompts, models fail to generate sufficient divergence. This results in a "manifold entanglement" that geometrically explains sycophancy and hallucination. Ultimately, our findings revise the linear-isometric presumption, demonstrating that the emergence of discrete logic in LLMs is purchased at an irreducible cost of topological deformation.

Self-supervised learning (SSL) has emerged as a powerful paradigm for learning representations without labeled data, often by enforcing invariance to input transformations such as rotations or blurring. Recent studies have highlighted two pivotal properties for effective representations: (i) avoiding dimensional collapse-where the learned features occupy only a low-dimensional subspace, and (ii) enhancing uniformity of the induced distribution. In this work, we introduce T-REGS, a simple regularization framework for SSL based on the length of the Minimum Spanning Tree (MST) over the learned representation. We provide theoretical analysis demonstrating that T-REGS simultaneously mitigates dimensional collapse and promotes distribution uniformity on arbitrary compact Riemannian manifolds. Several experiments on synthetic data and on classical SSL benchmarks validate the effectiveness of our approach at enhancing representation quality.

Vision-Language Model (VLM) agents have advanced zero-shot object-goal navigation, yet single-frame reasoning leaves them without the cross-step behavioral awareness an embodied navigator requires, producing recurring failures such as dead-end stalls, in-room loops, and circuitous approaches to detected targets. Prompt-based remedies inflate token budgets across multi-submodule episodes and still struggle to encode inherently spatial signals such as angles, map cells, and viewpoint coordinates. In this paper, we propose SkillNav, an extensible behavioral skill framework for VLM-based navigation that treats the curiosity value map already maintained by modern VLM navigators as a writable substrate on which composable skills inscribe behavioral memory at zero token cost. Skills are stratified into three tiers by their level of behavioral authority, namely soft scaling for proportional reweighting, lower-bound boost for region-level guarantees, and hard override for threshold-triggered forced actions, and cooperate across tiers under a fixed composition order that establishes a predictable, declared priority among skills. This design turns capability improvement into skill registration: new behaviors plug in without retraining the VLM or disturbing existing skills, opening a path for continual refinement. A minimal prompt channel complements the score-level skills with category-level semantic hints, yielding a dual-representation design in which spatial memory lives on the map and semantic memory in short prompts. Training-free, SkillNav establishes new state-of-the-art SPL across MP3D (25.5), HM3D v0.1 (39.3), and HM3D v0.2 (43.2), improving SPL by up to 6.0 absolute over the strongest prior method, and achieves the highest Success Rate on HM3D v0.1 (69.7) and v0.2 (75.9).

Neural representations carry rich geometric structure; but does that structure causally shape behavior? To address this question, we intervene along paths through activation space defined by different geometries, and measure the behavioral trajectories they induce. In particular, we test whether interventions that respect the geometry of activation space will yield behaviors close to those the model exhibits naturally. Concretely, we first fit an activation manifold M_h to representations and a behavior manifold M_y to output probability distributions. We then test the link M_h leftrightarrow M_y via interventions: we find that steering along M_h, which we term manifold steering, yields behavioral trajectories that follow M_y, while linear steering -- which assumes a Euclidean geometry -- cuts through off-manifold regions and hence produces unnatural outputs. Moreover, optimizing interventions in activation space to produce paths along M_y recovers activation trajectories that trace the curvature of M_h. We demonstrate this bidirectional relationship between the geometry of representation and behavior across tasks and modalities. In language models, we use reasoning tasks with cyclic and sequential geometries as well as in-context learning tasks with more complex graph geometries. In a video world model, we use a task with geometry corresponding to physical dynamics. Overall, our work shows that geometry in neural representation is not merely incidental, but is in fact the proper object for enabling principled control via intervention on internals. This recasts the core problem of steering from finding the right direction to finding the right geometry.

Normalizing Flows explicitly maximize a full-dimensional likelihood on the training data. However, real data is typically only supported on a lower-dimensional manifold leading the model to expend significant compute on modeling noise. Injective Flows fix this by jointly learning a manifold and the distribution on it. So far, they have been limited by restrictive architectures and/or high computational cost. We lift both constraints by a new efficient estimator for the maximum likelihood loss, compatible with free-form bottleneck architectures. We further show that naively learning both the data manifold and the distribution on it can lead to divergent solutions, and use this insight to motivate a stable maximum likelihood training objective. We perform extensive experiments on toy, tabular and image data, demonstrating the competitive performance of the resulting model.

Sequential recommendation increasingly employs latent multi-step reasoning to enhance test-time computation. Despite empirical gains, existing approaches largely drive intermediate reasoning states via target-dominant objectives without imposing explicit feasibility constraints. This results in latent drift, where reasoning trajectories deviate into implausible regions. We argue that effective recommendation reasoning should instead be viewed as navigation on a collaborative manifold rather than free-form latent refinement. To this end, we propose ManCAR (Manifold-Constrained Adaptive Reasoning), a principled framework that grounds reasoning within the topology of a global interaction graph. ManCAR constructs a local intent prior from the collaborative neighborhood of a user's recent actions, represented as a distribution over the item simplex. During training, the model progressively aligns its latent predictive distribution with this prior, forcing the reasoning trajectory to remain within the valid manifold. At test time, reasoning proceeds adaptively until the predictive distribution stabilizes, avoiding over-refinement. We provide a variational interpretation of ManCAR to theoretically validate its drift-prevention and adaptive test-time stopping mechanisms. Experiments on seven benchmarks demonstrate that ManCAR consistently outperforms state-of-the-art baselines, achieving up to a 46.88% relative improvement w.r.t. NDCG@10. Our code is available at https://github.com/FuCongResearchSquad/ManCAR.

Weight-space merging aims to combine multiple fine-tuned LLMs into a single model without retraining, yet most existing approaches remain fundamentally parameter-space heuristics. This creates three practical limitations. First, linear averaging, task vectors, and related rules operate on Euclidean coordinates, even though the desired goal is to merge functionality, i.e., predictive behaviors across tasks. Second, when the source checkpoints are farther apart or more heterogeneous, Euclidean blends often trigger representation collapse, manifested as activation variance shrinkage and effective-rank degradation, which sharply degrades accuracy. Third, many geometry-inspired methods are most natural for two-model interpolation and do not extend cleanly to merging N>2 experts with a principled objective. We address these issues by formulating model merging as computing a weighted Karcher mean on the Fisher--Rao manifold, which is locally equivalent to minimizing a KL-based function distance between predictive distributions. We derive a practical fixed-point algorithm using a lightweight spherical proxy that preserves norms and generalizes directly to multi-expert merging. Across various benchmarks and collapse diagnostics, our method remains stable as the number and heterogeneity of merged models increase, consistently outperforming prior baselines.

Current benchmarks for AI clinician systems, often based on multiple-choice exams or manual rubrics, fail to capture the depth, robustness, and safety required for real-world clinical practice. To address this, we introduce the GAPS framework, a multidimensional paradigm for evaluating Grounding (cognitive depth), Adequacy (answer completeness), Perturbation (robustness), and Safety. Critically, we developed a fully automated, guideline-anchored pipeline to construct a GAPS-aligned benchmark end-to-end, overcoming the scalability and subjectivity limitations of prior work. Our pipeline assembles an evidence neighborhood, creates dual graph and tree representations, and automatically generates questions across G-levels. Rubrics are synthesized by a DeepResearch agent that mimics GRADE-consistent, PICO-driven evidence review in a ReAct loop. Scoring is performed by an ensemble of large language model (LLM) judges. Validation confirmed our automated questions are high-quality and align with clinician judgment. Evaluating state-of-the-art models on the benchmark revealed key failure modes: performance degrades sharply with increased reasoning depth (G-axis), models struggle with answer completeness (A-axis), and they are highly vulnerable to adversarial perturbations (P-axis) as well as certain safety issues (S-axis). This automated, clinically-grounded approach provides a reproducible and scalable method for rigorously evaluating AI clinician systems and guiding their development toward safer, more reliable clinical practice.

Standard training metrics like loss fail to explain the emergence of complex capabilities in large language models. We take a spectral approach to investigate the geometry of learned representations across pretraining and post-training, measuring effective rank (RankMe) and eigenspectrum decay (α-ReQ). With OLMo (1B-7B) and Pythia (160M-12B) models, we uncover a consistent non-monotonic sequence of three geometric phases during autoregressive pretraining. The initial "warmup" phase exhibits rapid representational collapse. This is followed by an "entropy-seeking" phase, where the manifold's dimensionality expands substantially, coinciding with peak n-gram memorization. Subsequently, a "compression-seeking" phase imposes anisotropic consolidation, selectively preserving variance along dominant eigendirections while contracting others, a transition marked with significant improvement in downstream task performance. We show these phases can emerge from a fundamental interplay of cross-entropy optimization under skewed token frequencies and representational bottlenecks (d ll |V|). Post-training further transforms geometry: SFT and DPO drive "entropy-seeking" dynamics to integrate specific instructional or preferential data, improving in-distribution performance while degrading out-of-distribution robustness. Conversely, RLVR induces "compression-seeking", enhancing reward alignment but reducing generation diversity.

Reinforcement learning exhibits potential in enhancing the reasoning abilities of large language models, yet it is hard to scale for the low sample efficiency during the rollout phase. Existing methods attempt to improve efficiency by scheduling problems based on problem difficulties. However, these approaches suffer from unstable and biased estimations of problem difficulty and fail to capture the alignment between model competence and problem difficulty in RL training, leading to suboptimal results. To tackle these limitations, this paper introduces Competence-Difficulty Alignment Sampling (CDAS), which enables accurate and stable estimation of problem difficulties by aggregating historical performance discrepancies of problems. Then the model competence is quantified to adaptively select problems whose difficulty is in alignment with the model's current competence using a fixed-point system. Experimental results across a range of challenging mathematical benchmarks show that CDAS achieves great improvements in both accuracy and efficiency. CDAS attains the highest average accuracy against baselines and exhibits significant speed advantages compared to Dynamic Sampling, a competitive strategy in DAPO, which is 2.33 times slower than CDAS.

Dimensionality reduction is crucial both for visualization and preprocessing high dimensional data for machine learning. We introduce a novel method based on a hierarchy built on 1-nearest neighbor graphs in the original space which is used to preserve the grouping properties of the data distribution on multiple levels. The core of the proposal is an optimization-free projection that is competitive with the latest versions of t-SNE and UMAP in performance and visualization quality while being an order of magnitude faster in run-time. Furthermore, its interpretable mechanics, the ability to project new data, and the natural separation of data clusters in visualizations make it a general purpose unsupervised dimension reduction technique. In the paper, we argue about the soundness of the proposed method and evaluate it on a diverse collection of datasets with sizes varying from 1K to 11M samples and dimensions from 28 to 16K. We perform comparisons with other state-of-the-art methods on multiple metrics and target dimensions highlighting its efficiency and performance. Code is available at https://github.com/koulakis/h-nne

In this paper, we adopt the Universal Manifold Embedding (UME) framework for the estimation of rigid transformations and extend it, so that it can accommodate scenarios involving partial overlap and differently sampled point clouds. UME is a methodology designed for mapping observations of the same object, related by rigid transformations, into a single low-dimensional linear subspace. This process yields a transformation-invariant representation of the observations, with its matrix form representation being covariant (i.e. equivariant) with the transformation. We extend the UME framework by introducing a UME-compatible feature extraction method augmented with a unique UME contrastive loss and a sampling equalizer. These components are integrated into a comprehensive and robust registration pipeline, named UMERegRobust. We propose the RotKITTI registration benchmark, specifically tailored to evaluate registration methods for scenarios involving large rotations. UMERegRobust achieves better than state-of-the-art performance on the KITTI benchmark, especially when strict precision of (1{\deg}, 10cm) is considered (with an average gain of +9%), and notably outperform SOTA methods on the RotKITTI benchmark (with +45% gain compared the most recent SOTA method).

Drawing motivation from the manifold hypothesis, which posits that most high-dimensional data lies on or near low-dimensional manifolds, we apply manifold learning to the space of neural networks. We learn manifolds where datapoints are neural networks by introducing a distance between the hidden layer representations of the neural networks. These distances are then fed to the non-linear dimensionality reduction algorithm PHATE to create a manifold of neural networks. We characterize this manifold using features of the representation, including class separation, hierarchical cluster structure, spectral entropy, and topological structure. Our analysis reveals that high-performing networks cluster together in the manifold, displaying consistent embedding patterns across all these features. Finally, we demonstrate the utility of this approach for guiding hyperparameter optimization and neural architecture search by sampling from the manifold.

Most Bundle Adjustment (BA) solvers like the Levenberg-Marquardt algorithm require a good initialization. Instead, initialization-free BA remains a largely uncharted territory. The under-explored Variable Projection algorithm (VarPro) exhibits a wide convergence basin even without initialization. Coupled with object space error formulation, recent works have shown its ability to solve small-scale initialization-free bundle adjustment problem. To make such initialization-free BA approaches scalable, we introduce Power Variable Projection (PoVar), extending a recent inverse expansion method based on power series. Importantly, we link the power series expansion to Riemannian manifold optimization. This projective framework is crucial to solve large-scale bundle adjustment problems without initialization. Using the real-world BAL dataset, we experimentally demonstrate that our solver achieves state-of-the-art results in terms of speed and accuracy. To our knowledge, this work is the first to address the scalability of BA without initialization opening new venues for initialization-free structure-from-motion.

A significant gap exists between theory and practice in deep learning. Generalization and approximation error bounds are often derived for simplified models or are too loose to be informative. Many rely on the manifold hypothesis and on geometric regularity such as intrinsic dimension, curvature, and reach. Progress requires insight into data-manifold geometry and suitable benchmarks, yet existing options are polarized: analytic manifolds with known geometry but limited applicability, or real-world datasets where geometry is only coarsely estimable. We introduce a benchmarking framework for studying data geometry. We repurpose and extend dSprites and COIL-20 with additional transformation dimensions and dense, axis-aligned sampling, and pair them with finite-difference estimators that recover curvature, reach, and volume at near-ground-truth accuracy in a regime where general-purpose estimators are unreliable or difficult to deploy. The framework is intended as a controlled testbed, useful as a calibration environment for geometric estimators and a sandbox for probing theoretical assumptions. To illustrate its use, we present two application studies, namely assessing the scaling behavior of the bounds of Genovese et al. and Fefferman et al., and tracking the layer-wise geometry of a β-VAE, highlighting the behavior of current bounds and the value of controlled benchmarks for guiding and validating future theory. A reference implementation is available at https://github.com/koulakis/manifold-microscope.

In Multi-Task Learning (MTL), tasks may compete and limit the performance achieved on each other, rather than guiding the optimization to a solution, superior to all its single-task trained counterparts. Since there is often not a unique solution optimal for all tasks, practitioners have to balance tradeoffs between tasks' performance, and resort to optimality in the Pareto sense. Most MTL methodologies either completely neglect this aspect, and instead of aiming at learning a Pareto Front, produce one solution predefined by their optimization schemes, or produce diverse but discrete solutions. Recent approaches parameterize the Pareto Front via neural networks, leading to complex mappings from tradeoff to objective space. In this paper, we conjecture that the Pareto Front admits a linear parameterization in parameter space, which leads us to propose Pareto Manifold Learning, an ensembling method in weight space. Our approach produces a continuous Pareto Front in a single training run, that allows to modulate the performance on each task during inference. Experiments on multi-task learning benchmarks, ranging from image classification to tabular datasets and scene understanding, show that Pareto Manifold Learning outperforms state-of-the-art single-point algorithms, while learning a better Pareto parameterization than multi-point baselines.

Leaderboards rank frontier models on independent axes but do not reveal whether capabilities reinforce or trade off across releases -- and at the frontier, this interaction is the more informative signal. We decompose paired SWE-bench and GPQA Diamond scores into a population coupling trend and per-release residual (h-field) that diagnoses capability emphasis and identifies which measurement or stress test is most informative next. Across 34 models from 10 labs (2024--2026), capabilities cooperate (r = +0.72, p < 10^{-6}), but cooperation varies by lab and over time: DeepSeek reversed from reasoning-rich to coding-first (h: +11.2 to -4.7, 15.9-pp swing); Google maintains consistent reasoning emphasis; Anthropic oscillates between coding excursions and recovery. Cooperation is not static -- it cascades. Six open-weight architectures confirm a second capability transition at 30--72B, and SWE-bench is now saturating while HLE and instruction-following retain discriminatory spread -- signaling the next axis rotation. We provide a three-level playbook (locate, diagnose, rotate), a per-lab measurement-priority table, and seven falsifiable predictions with timestamped criteria for the next 12 months of frontier releases. Per-lab coupling slopes vary 5times (Google 1.15 vs. DeepSeek 0.23), quantifying how efficiently each recipe converts coding gains into reasoning. Five April 2026 releases confirm the diagnostic out of sample (r rises from +0.72 to +0.75). An interactive dashboard provides phase classification with actionable recommendations, h-field diagnostics, per-lab coupling trajectories, ODE-based scaling predictions, benchmark rotation guidance, self-steering demo, and live tracking of all seven predictions: https://zehenlabs.com/cape/.

We present a zero-shot, training-free and optimization-free framework for generating 360 panoramic images and videos by directly injecting spherical priors into pre-trained diffusion transformers. Existing methods either rely on costly fine-tuning on scarce panoramic data that limits generalization, or leverage multi-step optimization that incurs prohibitive inference latency. We observe that contemporary generative models natively exhibit some panoramic priors from large-scale training. However, these emergent capabilities are insufficient, as the models fundamentally fail to satisfy the rigorous topological constraints imposed by equirectangular projection (ERP). We introduce a zero-shot and optimization-free approach that resolves these constraints at inference time. Spherical RoPE replaces standard rotary position embeddings: low-frequency channels are re-parameterized as 3D Cartesian coordinates to natively encode the spherical manifold, while high-frequency channels are harmonically quantized to enforce exact periodicity. Coupled with complementary Semantic Distortion classifier-free guidance (CFG) that explicitly steers geometry, we avoid retraining and inherit the full creative breadth of state-of-the-art models. Our approach generalizes across diverse backbones and 360 generation modalities. We demonstrate this across text-to-panorama using Flux.1, Flux.2, and LTX-Video backbones, achieving competitive performance against baselines, all while remaining training-free. Project page: https://orhir.github.io/SpheRoPE

The Distributional Principal Autoencoder (DPA) combines distributionally correct reconstruction with principal-component-like interpretability of the encodings. In this work, we provide exact theoretical guarantees on both fronts. First, we derive a closed-form relation linking each optimal level-set geometry to the data-distribution score. This result explains DPA's empirical ability to disentangle factors of variation of the data, as well as allows the score to be recovered directly from samples. When the data follows the Boltzmann distribution, we demonstrate that this relation yields an approximation of the minimum free-energy path for the Mueller-Brown potential in a single fit. Second, we prove that if the data lies on a manifold that can be approximated by the encoder, latent components beyond the manifold dimension are conditionally independent of the data distribution - carrying no additional information - and thus reveal the intrinsic dimension. Together, these results show that a single model can learn the data distribution and its intrinsic dimension with exact guarantees simultaneously, unifying two longstanding goals of unsupervised learning.

Riemannian diffusion models draw inspiration from standard Euclidean space diffusion models to learn distributions on general manifolds. Unfortunately, the additional geometric complexity renders the diffusion transition term inexpressible in closed form, so prior methods resort to imprecise approximations of the score matching training objective that degrade performance and preclude applications in high dimensions. In this work, we reexamine these approximations and propose several practical improvements. Our key observation is that most relevant manifolds are symmetric spaces, which are much more amenable to computation. By leveraging and combining various ans\"{a}tze, we can quickly compute relevant quantities to high precision. On low dimensional datasets, our correction produces a noticeable improvement, allowing diffusion to compete with other methods. Additionally, we show that our method enables us to scale to high dimensional tasks on nontrivial manifolds. In particular, we model QCD densities on SU(n) lattices and contrastively learned embeddings on high dimensional hyperspheres.

Riemannian representation learning typically relies on approximating densities on chosen manifolds. This involves optimizing difficult objectives, potentially harming models. To completely circumvent this issue, we introduce the Riemannian generative decoder which finds manifold-valued maximum likelihood latents with a Riemannian optimizer while training a decoder network. By discarding the encoder, we vastly simplify the manifold constraint compared to current approaches which often only handle few specific manifolds. We validate our approach on three case studies -- a synthetic branching diffusion process, human migrations inferred from mitochondrial DNA, and cells undergoing a cell division cycle -- each showing that learned representations respect the prescribed geometry and capture intrinsic non-Euclidean structure. Our method requires only a decoder, is compatible with existing architectures, and yields interpretable latent spaces aligned with data geometry.

Target encoding plays a central role when learning Convolutional Neural Networks. In this realm, One-hot encoding is the most prevalent strategy due to its simplicity. However, this so widespread encoding schema assumes a flat label space, thus ignoring rich relationships existing among labels that can be exploited during training. In large-scale datasets, data does not span the full label space, but instead lies in a low-dimensional output manifold. Following this observation, we embed the targets into a low-dimensional space, drastically improving convergence speed while preserving accuracy. Our contribution is two fold: (i) We show that random projections of the label space are a valid tool to find such lower dimensional embeddings, boosting dramatically convergence rates at zero computational cost; and (ii) we propose a normalized eigenrepresentation of the class manifold that encodes the targets with minimal information loss, improving the accuracy of random projections encoding while enjoying the same convergence rates. Experiments on CIFAR-100, CUB200-2011, Imagenet, and MIT Places demonstrate that the proposed approach drastically improves convergence speed while reaching very competitive accuracy rates.

UMAP (Uniform Manifold Approximation and Projection) is a novel manifold learning technique for dimension reduction. UMAP is constructed from a theoretical framework based in Riemannian geometry and algebraic topology. The result is a practical scalable algorithm that applies to real world data. The UMAP algorithm is competitive with t-SNE for visualization quality, and arguably preserves more of the global structure with superior run time performance. Furthermore, UMAP has no computational restrictions on embedding dimension, making it viable as a general purpose dimension reduction technique for machine learning.

Action Quality Assessment (AQA) evaluates diverse skills but models struggle with non-stationary data. We propose Continual AQA (CAQA) to refine models using sparse new data. Feature replay preserves memory without storing raw inputs. However, the misalignment between static old features and the dynamically changing feature manifold causes severe catastrophic forgetting. To address this novel problem, we propose Manifold-Aligned Graph Regularization (MAGR), which first aligns deviated old features to the current feature manifold, ensuring representation consistency. It then constructs a graph jointly arranging old and new features aligned with quality scores. Experiments show MAGR outperforms recent strong baselines with up to 6.56%, 5.66%, 15.64%, and 9.05% correlation gains on the MTL-AQA, FineDiving, UNLV-Dive, and JDM-MSA split datasets, respectively. This validates MAGR for continual assessment challenges arising from non-stationary skill variations.

While Large Language Models (LLMs) have demonstrated impressive performance in various domains and tasks, concerns about their safety are becoming increasingly severe. In particular, since models may store unsafe knowledge internally, machine unlearning has emerged as a representative paradigm to ensure model safety. Existing approaches employ various training techniques, such as gradient ascent and negative preference optimization, in attempts to eliminate the influence of undesired data on target models. However, these methods merely suppress the activation of undesired data through parametric training without completely eradicating its informational traces within the model. This fundamental limitation makes it difficult to achieve effective continuous unlearning, rendering these methods vulnerable to relearning attacks. To overcome these challenges, we propose a Metamorphosis Representation Projection (MRP) approach that pioneers the application of irreversible projection properties to machine unlearning. By implementing projective transformations in the hidden state space of specific network layers, our method effectively eliminates harmful information while preserving useful knowledge. Experimental results demonstrate that our approach enables effective continuous unlearning and successfully defends against relearning attacks, achieving state-of-the-art performance in unlearning effectiveness while preserving natural performance. Our code is available in https://github.com/ChengcanWu/MRP.

World modeling requires forecasting uncertain futures while preserving information useful for downstream perception. Existing visual world models often struggle to satisfy both goals: VAE-based stochastic models operate in low-dimensional reconstruction latents, which can limit perception performance, while deterministic predictors using strong pretrained features collapse multimodal futures into a single blurry mean. In this work, we propose FlowWM, a stochastic world model that performs flow matching directly within pretrained feature space (e.g., DINOv3). This is challenging because pretrained features are substantially high-dimensional, making standard diffusion recipes suboptimal. To address this, we investigate the design choices needed for feature-space flow matching and introduce a differentiable one-step projection mechanism that enables efficient training with temporal consistency and task-driven objectives. We evaluate FlowWM on two benchmarks: a synthetic benchmark for systematic evaluation of accuracy and diversity, and a real-world benchmark FuturePerception. FlowWM improves perception performance, mode coverage, and horizon robustness, validating our proposed design for stochastic world modeling in high-dimensional feature spaces.

Structural fidelity is essential to scientific methodology diagrams. To communicate research logic, these diagrams must faithfully render components, directional relations, and textual annotations. Since a single error, such as a reversed arrow or an unreadable equation, can invalidate the entire figure, structural fidelity is inherently conjunctive: correctness on one axis cannot compensate for failure on another. Current open-source models fail to satisfy this criterion. Supervised fine-tuning (SFT) learns plausible layouts but cannot reliably ensure structural correctness, while scalar reward-based post-training obscures which structural dimension has failed. To address this, we introduce SciForma, a framework for the structure faithful generation of scientific methodology diagrams. Specifically, SciForma decomposes diagram quality into three structural axes: Component, Arrow, and Text, guided by a structural inventory. Built on this foundation, we curate SciFormaData-700K for structured training and SciFormaBench-2K for logic-verified evaluation. To close the gap left by SFT, we develop Multi-Dimensional Conjunctive Preference Optimization (M-DPO), which enforces simultaneous correctness across all axes and adaptively routes gradients to the most deficient dimension in post-training. The same structural inventory also enables iterative editing at inference time to correct residual errors. This combination allows SciForma-9B to exceed all open-source baselines and GPT-Image-1.5 on both SciFormaBench-2K and AIBench, bringing open scientific diagram generation close to proprietary-level structural fidelity. Our code and data will be available at: https://github.com/microsoft/SciForma.

Every act of language generation compresses a rich internal state into a single token sequence. We call this process intention collapse: a many-to-one projection from a high dimensional intention space I into an external language space L. We formalize intention collapse for contemporary language models, define three simple, model agnostic intention metrics (intention entropy Hint, effective dimensionality dimeff, and latent knowledge recoverability Recov), and propose an empirical agenda for studying how inference time computation shapes internal intentions before they are verbalized. We also report a first small scale experiment. Using a 4 bit Mistral 7B model on 200 GSM8K problems, we compare a direct answer baseline, a chain of thought (CoT) regime, and a babble control. CoT raises accuracy from 5.5 percent to 53 percent, sharply reduces pre collapse intention entropy (from 1.42 to 0.37 bits), and shows higher global effective dimensionality than the other regimes despite producing fewer tokens than babble. At the same time, Hint has little item level predictive power, and a linear probe on I achieves AUROC 0.65 in the CoT regime but only about chance in the baseline regime, where it collapses to the majority class. These preliminary results indicate that intention level metrics can distinguish inference regimes and expose latent information that is partly lost during collapse, while also revealing important limitations of our current proxies

Reinforcement Learning with Verifiable Rewards (RLVR) is increasingly viewed as a tree pruning mechanism. However, we identify a systemic pathology termed Recursive Space Contraction (RSC), an irreversible collapse driven by the combined dynamics of positive sharpening and negative squeezing, where the sampling probability of valid alternatives vanishes. While Kullback-Leibler (KL) regularization aims to mitigate this, it imposes a rigid Shape Matching constraint that forces the policy to mimic the reference model's full density, creating a gradient conflict with the sharpening required for correctness. We propose Anchored Policy Optimization (APO), shifting the paradigm from global Shape Matching to Support Coverage. By defining a Safe Manifold based on the reference model's high-confidence support, APO permits aggressive sharpening for efficiency while selectively invoking a restorative force during error correction to prevent collapse. We theoretically derive that APO serves as a gradient-aligned mechanism to maximize support coverage, enabling an Elastic Recovery that re-inflates valid branches. Empirical evaluations on mathematical benchmarks demonstrate that APO breaks the accuracy-diversity trade-off, significantly improving Pass@1 while restoring the Pass@K diversity typically lost by standard policy gradient methods.

LLM companions are deployed at scale in personally consequential settings, yet poorly evaluated. Existing benchmarks use hand-authored scenarios and prompted simulators, aggregate empathy into one score, and overlook judge biases such as same-family favoritism and scale drift. We introduce CompanionBench, an interactive bilingual benchmark. To our knowledge, it is the first companion benchmark to ground both its scenarios and a trained user simulator in de-identified real-world data. A hidden disclosure gate branches each persona's trajectory on the agent's own behavior, controlling the interaction state space without scripting dialogue. We operationalize ten capabilities derived from 25 theories across psychology and counseling, four of them not graded explicitly by prior work: holding ambiguity, selfobject responsiveness, positive resonance and calibrated challenge. Agents are assessed on two complementary axes: a subjective ten-capability rubric and a deterministic measure of whether deeper disclosure was earned. A cross-family panel dilutes same-family favoritism; an Item Response Theory model separates agent quality from judge severity. Theory fixes what to measure and how personas are structured; real data supply events, history, and profiles -- coverage from theory, authenticity from data. Rankings are reproducible in both languages (rho = 0.996 ZH / 0.953 EN). Evaluating 28 agents reveals capability-level differences obscured by aggregate scores. Emotion regulation and calibrated challenge remain common weaknesses; holding ambiguity discriminates most. Role-play agents rank near the bottom: immersion does not imply relational competence. Across agents, the dominant failure mode is substituting surface warmth for substantive relational support. We will release 500 Chinese-English parallel pairs and the evaluation code.

Real-world phenomena do not generate arbitrary variability: their signals concentrate on compact, low-variability subsets of functional space, enabling rapid generalization from few examples. A small child can recognize a dog after extremely limited exposure because the perceptual manifold of "dog" is compact, structured, and low-dimensional. We formalize this principle through a deterministic functional-topological framework in which the set of valid realizations produced by a physical process forms a compact subset of a Banach space, endowed with stable invariants, a finite Hausdorff radius, and an induced continuous perceptual functional. This geometry provides explicit limits on knowledge, conditions for identifiability, and guarantees for generalization from sparse evidence -- properties fundamental to both natural and artificial intelligence. Across electromechanical, electrochemical, and physiological domains, we show that real-world processes consistently generate compact perceptual manifolds with the same geometric characteristics. Their boundaries can be discovered in a fully self-supervised manner as the empirical radius saturates with increasing sampling, even when the governing equations are unknown. These results demonstrate that deterministic functional topology offers a unified mathematical foundation for perception, representation, and world-model construction. It provides a geometric explanation for why biological learners and self-supervised AI systems can generalize from few observations, and establishes compact perceptual manifolds as a fundamental building block for future AI architectures. Finally, this work unifies biological perception and modern self-supervised models under a single geometric principle: both derive their generalization ability from the compactness and invariants of real-world perceptual manifolds.

Some security-development settings require local models that map an objective to an ordered, checkable plan. We present a low-rank decomposition adapter and release a case-disjoint corpus with 24 authored decompositions and 83 derived next-step examples across 24 satellite-security cases. To prevent reference-plan leakage, prompts contain one objective and eight shuffled SPARTA candidates. The evaluation candidate sets are constructed with oracle inclusion of every reference technique, so this study measures selection from a controlled set, not retrieval. On six fixed cases and five decoding seeds, mean scores vary across adapters and prompted Qwen2.5 baselines; a separate greedy check over three adapter training seeds shows non-negligible training variance. A 24-fold greedy leave-one-case-out control at the two compact sizes likewise shows tradeoffs: at 1.5B, adapter precision is 0.583 against 0.480 for two-shot prompting, while recall is 0.586 against 0.660. Case-resampling intervals for adapter precision relative to the strongest prompted baseline cross zero at 1.5B and 7B. The adapter is also substantially more format-compliant, which prevents attributing all score differences to selection. Autoregressive next-step accuracy is 0.08, 0.06, and 0.29 at 0.5B, 1.5B, and 7B. We therefore offer the formulation, leakage-controlled dataset, reproducibility package, and descriptive analysis as a proof of concept, not evidence of a reliable stand-alone decomposition system or a general adapter advantage. A separate diagnostic tests contract reuse.

Classifier-free guidance (CFG) is a widely used technique for controllable generation in diffusion and flow-based models. Despite its empirical success, CFG relies on a heuristic linear extrapolation that is often sensitive to the guidance scale. In this work, we provide a principled interpretation of CFG through the lens of optimization. We demonstrate that the velocity field in flow matching corresponds to the gradient of a sequence of smoothed distance functions, which guides latent variables toward the scaled target image set. This perspective reveals that the standard CFG formulation is an approximation of this gradient, where the prediction gap, the discrepancy between conditional and unconditional outputs, governs guidance sensitivity. Leveraging this insight, we reformulate the CFG sampling as a homotopy optimization with a manifold constraint. This formulation necessitates a manifold projection step, which we implement via an incremental gradient descent scheme during sampling. To improve computational efficiency and stability, we further enhance this iterative process with Anderson Acceleration without requiring additional model evaluations. Our proposed methods are training-free and consistently refine generation fidelity, prompt alignment, and robustness to the guidance scale. We validate their effectiveness across diverse benchmarks, demonstrating significant improvements on large-scale models such as DiT-XL-2-256, Flux, and Stable Diffusion 3.5.

We investigate the geometric structure of learning dynamics in overparameterized transformer models through carefully controlled modular arithmetic tasks. Our primary finding is that despite operating in high-dimensional parameter spaces (d=128), transformer training trajectories rapidly collapse onto low-dimensional execution manifolds of dimension 3--4. This dimensional collapse is robust across random seeds and moderate task difficulties, though the orientation of the manifold in parameter space varies between runs. We demonstrate that this geometric structure underlies several empirically observed phenomena: (1) sharp attention concentration emerges as saturation along routing coordinates within the execution manifold, (2) SGD commutators are preferentially aligned with the execution subspace (up to 10times random baseline) early in training, with >92% of non-commutativity confined to orthogonal staging directions and this alignment decreasing as training converges, and (3) sparse autoencoders capture auxiliary routing structure but fail to isolate execution itself, which remains distributed across the low-dimensional manifold. Our results suggest a unifying geometric framework for understanding transformer learning, where the vast majority of parameters serve to absorb optimization interference while core computation occurs in a dramatically reduced subspace. These findings have implications for interpretability, training curriculum design, and understanding the role of overparameterization in neural network learning.

Skill self-evolution methods for LLM agents aim to turn execution trajectories into reusable skill documents. However, current pipelines typically derive skill patches from a single trajectory per task, merge them indiscriminately, and load the entire skill corpus during inference. These choices lead to unreliable evidence extraction, the accumulation of low-quality or even harmful skill edits, and inefficient use of context due to irrelevant or conflicting skill content. We propose SkillCAT, a framework that decomposes this process into three stages. (1) Contrastive Causal Extraction (CCE) samples multiple trajectories per task and contrasts same-task success/failure pairs to find the evidence that explains outcome differences. (2) Assessment-Augmented Evolution (AAE) replays each candidate patch on source-task clones, retains only those that do not damage task outcomes, and then merges the retained patches hierarchically. (3) Topology-Aware Task Execution (TTE) compiles the evolved skills into routable sub-skill topologies, so that inference loads only task-relevant capability nodes. We evaluate SkillCAT on widely-used agent benchmarks, including SpreadsheetBench, WikiTableQuestions, and DocVQA, and further assess cross-model and out-of-distribution generalization. Across these settings, SkillCAT improves the average score over the initial skill by up to 49.69%, demonstrating reliable and effective skill evolution.

Skill Classification (SC) is the task of classifying job competences from job postings. This work is the first in SC applied to Danish job vacancy data. We release the first Danish job posting dataset: Kompetencer (en: competences), annotated for nested spans of competences. To improve upon coarse-grained annotations, we make use of The European Skills, Competences, Qualifications and Occupations (ESCO; le Vrang et al., 2014) taxonomy API to obtain fine-grained labels via distant supervision. We study two setups: The zero-shot and few-shot classification setting. We fine-tune English-based models and RemBERT (Chung et al., 2020) and compare them to in-language Danish models. Our results show RemBERT significantly outperforms all other models in both the zero-shot and the few-shot setting.

We introduce Minary, a computational framework designed as a candidate for the first formally provable autopoietic primitive. Minary represents interacting probabilistic events as multi-dimensional vectors and combines them via linear superposition rather than multiplicative scalar operations, thereby preserving uncertainty and enabling constructive and destructive interference in the range [-1,1]. A fixed set of ``perspectives'' evaluates ``semantic dimensions'' according to hidden competencies, and their interactions drive two discrete-time stochastic processes. We model this system as an iterated random affine map and use the theory of iterated random functions to prove that it converges in distribution to a unique stationary law; we moreover obtain an explicit closed form for the limiting expectation in terms of row, column, and global averages of the competency matrix. We then derive exact formulas for the mean and variance of the normalized consensus conditioned on the activation of a given semantic dimension, revealing how consensus depends on competency structure rather than raw input signals. Finally, we argue that Minary is organizationally closed yet operationally open in the sense of Maturana and Varela, and we discuss implications for building self-maintaining, distributed, and parallelizable computational systems that house a uniquely subjective notion of identity.

The manifold hypothesis posits that high-dimensional data often lies on a lower-dimensional manifold and that utilizing this manifold as the target space yields more efficient representations. While numerous traditional manifold-based techniques exist for dimensionality reduction, their application in self-supervised learning has witnessed slow progress. The recent MSimCLR method combines manifold encoding with SimCLR but requires extremely low target encoding dimensions to outperform SimCLR, limiting its applicability. This paper introduces a novel learning paradigm using an unbalanced atlas (UA), capable of surpassing state-of-the-art self-supervised learning approaches. We investigated and engineered the DeepInfomax with an unbalanced atlas (DIM-UA) method by adapting the Spatiotemporal DeepInfomax (ST-DIM) framework to align with our proposed UA paradigm. The efficacy of DIM-UA is demonstrated through training and evaluation on the Atari Annotated RAM Interface (AtariARI) benchmark, a modified version of the Atari 2600 framework that produces annotated image samples for representation learning. The UA paradigm improves existing algorithms significantly as the number of target encoding dimensions grows. For instance, the mean F1 score averaged over categories of DIM-UA is ~75% compared to ~70% of ST-DIM when using 16384 hidden units.

We propose Riemannian Flow Matching (RFM), a simple yet powerful framework for training continuous normalizing flows on manifolds. Existing methods for generative modeling on manifolds either require expensive simulation, are inherently unable to scale to high dimensions, or use approximations for limiting quantities that result in biased training objectives. Riemannian Flow Matching bypasses these limitations and offers several advantages over previous approaches: it is simulation-free on simple geometries, does not require divergence computation, and computes its target vector field in closed-form. The key ingredient behind RFM is the construction of a relatively simple premetric for defining target vector fields, which encompasses the existing Euclidean case. To extend to general geometries, we rely on the use of spectral decompositions to efficiently compute premetrics on the fly. Our method achieves state-of-the-art performance on many real-world non-Euclidean datasets, and we demonstrate tractable training on general geometries, including triangular meshes with highly non-trivial curvature and boundaries.

This paper addresses the challenge of integrating 3D meshes as a native modality within Multimodal Large Language Models (MLLMs). Diffusion-based large reconstruction models decouple semantic understanding from geometric reasoning, operating as stateless reconstructors conditioned on dense 2D pixel priors. Recent MLLM-based methods treat the 3D modality as an external output rather than a native component of the multimodal sequence, making incremental adaptations without a systematic analysis of how geometric manifolds align with MLLM feature spaces. We introduce EVA01, a unified framework that extends the modality boundary of MLLMs to natively incorporate 3D mesh understanding, generation, and context-aware editing. Built upon a Mixture-of-Transformers (MoT) architecture, EVA01 decouples the model into a pre-trained Understanding Expert (E_{und}) and a structurally mirrored Generation Expert (E_{gen}), coupled through shared global self-attention with hard modality routing. This design aligns the semantic latent space of the MLLM backbone with the geometric manifold, enabling direct transfer of multimodal priors without intermediate 2D representations. Results show that EVA01 achieves state-of-the-art native text-to-3D generation fidelity and unlocks robust long-context multi-turn geometric editing with identity preservation, a capability fundamentally inaccessible to stateless reconstruction pipelines. Our findings further offer architectural insights for integrating 2D foundation models with 3D tasks, informing the design of 3D-native multimodal systems. Project Page: https://www.seeles.ai/research/pages/EVA01

Large language models (LLMs) are increasingly used to simulate human populations via persona prompting, often under the assumptions that richer persona descriptions improve behavioral fidelity, similarly sized attribute combinations are equally simulatable, and persona definitions generalize across tasks. In this work, we formalize these assumptions and systematically evaluate them across multiple architectures, scales, and simulation settings. We identify a fundamental limitation we term persona manifold collapse, where increasingly expressive persona specifications lead to systematic contraction of representational and behavioral diversity. Across models, increasing persona complexity consistently reduces inter-persona separation in latent space and weakens behavioral differentiation in downstream simulation tasks. These effects persist across multiple analyses as richer personas fail to preserve human subgroup disagreement, performance varies across attribute combinations of similar size, and adding descriptive detail often degrades rather than improves simulation fidelity. Surprisingly, simple Age-Gender personas consistently outperform richly specified Ideal Customer Profiles (ICPs) across industries, achieving substantially higher downstream prediction accuracy. We find that collapse is not uniform across attributes. Certain combinations remain behaviorally stable and preserve stronger alignment with human responses, forming localized regions we term alignment bridges. Together, our results provide empirical and conceptual foundations for understanding the limits of persona-conditioned simulation, highlighting the need for representation-aware persona construction rather than increasing persona expressivity alone.

The Platonic Representation Hypothesis (PRH) holds that as models scale, representations of heterogeneous networks converge toward a shared model of reality. We propose its sequel and boundary, the Capability Convergence Hypothesis (CCH): under a fixed per-token inference budget, representational convergence does not entail capability convergence. Capability instead converges toward a class, the access-complete hybrid: any architecture holding both a compressive O(1)-state channel and a scalable verbatim-index channel. We anchor it on a witness task, the Newton's-apple problem in an infinite stream, and name three resource walls: a Shannon wall barring any o(Nb)-state architecture, a horizon wall barring any fixed window, and a circuit wall barring fixed-depth attention-only composition (conditional on TC0 != NC1). Under an explicit separability assumption a hybrid crosses all three by paying each wall's price, so capability is strictly super-additive under composition. We separate what we prove from what we conjecture: the access-completeness principle rests on information-theoretic lower bounds and pre-registered experiments, while the field-level convergence trend is an economics-motivated conjecture. We report the first pre-registered small-scale tests under criteria frozen before the data: the predicted scissors gap is measured (exact-retrieval error 0.994 vs. 0.000 once a 64-scalar state gains one global-attention layer), the state-tracking bifurcation lands at the registered boundary, and a conjunction witness shows an irreducibly two-channel solution; one prediction failed with its direction reversed and is reported as such. Representational convergence is given freely by scale; capability convergence must be purchased by access structure.

Humans rarely plan whole-body interactions with objects at the level of explicit whole-body movements. High-level intentions, such as affordance, define the goal, while coordinated balance, contact, and manipulation can emerge naturally from underlying physical and motor priors. Scaling such priors is key to enabling humanoids to compose and generalize loco-manipulation skills across diverse contexts while maintaining physically coherent whole-body coordination. To this end, we introduce InterPrior, a scalable framework that learns a unified generative controller through large-scale imitation pretraining and post-training by reinforcement learning. InterPrior first distills a full-reference imitation expert into a versatile, goal-conditioned variational policy that reconstructs motion from multimodal observations and high-level intent. While the distilled policy reconstructs training behaviors, it does not generalize reliably due to the vast configuration space of large-scale human-object interactions. To address this, we apply data augmentation with physical perturbations, and then perform reinforcement learning finetuning to improve competence on unseen goals and initializations. Together, these steps consolidate the reconstructed latent skills into a valid manifold, yielding a motion prior that generalizes beyond the training data, e.g., it can incorporate new behaviors such as interactions with unseen objects. We further demonstrate its effectiveness for user-interactive control and its potential for real robot deployment.

We adapt previous research on category theory and topological unsupervised learning to develop a functorial perspective on manifold learning, also known as nonlinear dimensionality reduction. We first characterize manifold learning algorithms as functors that map pseudometric spaces to optimization objectives and that factor through hierarchical clustering functors. We then use this characterization to prove refinement bounds on manifold learning loss functions and construct a hierarchy of manifold learning algorithms based on their equivariants. We express several popular manifold learning algorithms as functors at different levels of this hierarchy, including Metric Multidimensional Scaling, IsoMap, and UMAP. Next, we use interleaving distance to study the stability of a broad class of manifold learning algorithms. We present bounds on how closely the embeddings these algorithms produce from noisy data approximate the embeddings they would learn from noiseless data. Finally, we use our framework to derive a set of novel manifold learning algorithms, which we experimentally demonstrate are competitive with the state of the art.

Faithful visualizations of data residing on manifolds must take the underlying geometry into account when producing a flat planar view of the data. In this paper, we extend the classic stochastic neighbor embedding (SNE) algorithm to data on general Riemannian manifolds. We replace standard Gaussian assumptions with Riemannian diffusion counterparts and propose an efficient approximation that only requires access to calculations of Riemannian distances and volumes. We demonstrate that the approach also allows for mapping data from one manifold to another, e.g. from a high-dimensional sphere to a low-dimensional one.

Projection maintenance is one of the core data structure tasks. Efficient data structures for projection maintenance have led to recent breakthroughs in many convex programming algorithms. In this work, we further extend this framework to the Kronecker product structure. Given a constraint matrix {sf A} and a positive semi-definite matrix Win R^{ntimes n} with a sparse eigenbasis, we consider the task of maintaining the projection in the form of {sf B}^top({sf B}{sf B}^top)^{-1}{sf B}, where {sf B}={sf A}(Wotimes I) or {sf B}={sf A}(W^{1/2}otimes W^{1/2}). At each iteration, the weight matrix W receives a low rank change and we receive a new vector h. The goal is to maintain the projection matrix and answer the query {sf B}^top({sf B}{sf B}^top)^{-1}{sf B}h with good approximation guarantees. We design a fast dynamic data structure for this task and it is robust against an adaptive adversary. Following the beautiful and pioneering work of [Beimel, Kaplan, Mansour, Nissim, Saranurak and Stemmer, STOC'22], we use tools from differential privacy to reduce the randomness required by the data structure and further improve the running time.

With diffusion and flow matching models achieving state-of-the-art generating performance, the interest of the community now turned to reducing the inference time without sacrificing sample quality. Consistency Models (CMs), which are trained to be consistent on diffusion or probability flow ordinary differential equation (PF-ODE) trajectories, enable one or two-step flow or diffusion sampling. However, CMs typically require prolonged training with large batch sizes to obtain competitive sample quality. In this paper, we examine the training dynamics of CMs near convergence and discover that CM tangents -- CM output update directions -- are quite oscillatory, in the sense that they move parallel to the data manifold, not towards the manifold. To mitigate oscillatory tangents, we propose a new loss function, called the manifold feature distance (MFD), which provides manifold-aligned tangents that point toward the data manifold. Consequently, our method -- dubbed Align Your Tangent (AYT) -- can accelerate CM training by orders of magnitude and even out-perform the learned perceptual image patch similarity metric (LPIPS). Furthermore, we find that our loss enables training with extremely small batch sizes without compromising sample quality. Code: https://github.com/1202kbs/AYT

Diffusion models excel at 2D outpainting, but extending them to 360^circ panoramic completion from unposed perspective images is challenging due to the geometric and topological mismatch between perspective projections and spherical panoramas. We present Gimbal360, a principled framework that explicitly bridges perspective observations and spherical panoramas. We introduce a Canonical Viewing Space that regularizes projective geometry and provides a consistent intermediate representation between the two domains. To anchor in-the-wild inputs to this space, we propose a Differentiable Auto-Leveling module that stabilizes feature orientation without requiring camera parameters at inference. Panoramic generation also introduces a topological challenge. Standard generative architectures assume a bounded Euclidean image plane, while Equirectangular Projection (ERP) panoramas exhibit intrinsic S^1 periodicity. Euclidean operations therefore break boundary continuity. We address this mismatch by enforcing topological equivariance in the latent space to preserve seamless periodic structure. To support this formulation, we introduce Horizon360, a curated large-scale dataset of gravity-aligned panoramic environments. Extensive experiments show that explicitly standardizing geometric and topological priors enables Gimbal360 to achieve state-of-the-art performance in structurally consistent 360^circ scene completion.

Score-based generative models (SGMs) are a powerful class of generative models that exhibit remarkable empirical performance. Score-based generative modelling (SGM) consists of a ``noising'' stage, whereby a diffusion is used to gradually add Gaussian noise to data, and a generative model, which entails a ``denoising'' process defined by approximating the time-reversal of the diffusion. Existing SGMs assume that data is supported on a Euclidean space, i.e. a manifold with flat geometry. In many domains such as robotics, geoscience or protein modelling, data is often naturally described by distributions living on Riemannian manifolds and current SGM techniques are not appropriate. We introduce here Riemannian Score-based Generative Models (RSGMs), a class of generative models extending SGMs to Riemannian manifolds. We demonstrate our approach on a variety of manifolds, and in particular with earth and climate science spherical data.

Hyper-Connections (HC) generalize residual connections into multiple streams, employing residual matrices for cross-stream feature mixing to enrich model expressivity. However, unconstrained mixing disrupts the identity mapping property intrinsic to the residual connection, causing unstable training. To address this, Manifold-Constrained Hyper-Connections (mHC) and its variant restrict these matrices to the Birkhoff polytope (doubly stochastic matrices) via Sinkhorn iterations or permutation-based parameterizations. We reveal three limitations of this polytope constraint: (1) identity degeneration, where learned matrices collapse around the identity and diminish cross-stream interactions, (2) an expressivity bottleneck, as the non-negativity constraint prevents subtractive feature disentanglement, and (3) parameterization inefficiencies, manifesting as unstable Sinkhorn iterations or the factorial-scaling overhead of permutation-based parameterizations. To overcome these flaws, we propose Spectral-Sphere-Constrained Hyper-Connections (sHC). By geometrically shifting the feasible set from a rigid polytope to a spectral norm sphere, sHC allows negative entries, unlocking subtractive interactions for selective feature diversification. This shift eliminates unstable Sinkhorn projections and factorial parameterization, enabling expressive, non-degenerate residual matrices while preserving training stability.

We revisit a basic question in sequence modeling: is explicit self-attention actually necessary for strong performance and reasoning? We argue that standard multi-head attention is best seen as a form of tensor lifting: hidden vectors are mapped into a high-dimensional space of pairwise interactions, and learning proceeds by constraining this lifted tensor through gradient descent. This mechanism is extremely expressive but mathematically opaque, because after many layers it becomes very hard to describe the model with a small family of explicit invariants. To explore an alternative, we propose an attention-free architecture based on Grassmann flows. Instead of forming an L by L attention matrix, our Causal Grassmann layer (i) linearly reduces token states, (ii) encodes local token pairs as two-dimensional subspaces on a Grassmann manifold via Plucker coordinates, and (iii) fuses these geometric features back into the hidden states through gated mixing. Information therefore propagates by controlled deformations of low-rank subspaces over multi-scale local windows, so the core computation lives on a finite-dimensional manifold rather than in an unstructured tensor space. On the Wikitext-2 language modeling benchmark, purely Grassmann-based models with 13 to 18 million parameters achieve validation perplexities within about 10 to 15 percent of size-matched Transformers. On the SNLI natural language inference task, a Grassmann-Plucker head on top of DistilBERT slightly outperforms a Transformer head, with best validation and test accuracies of 0.8550 and 0.8538 compared to 0.8545 and 0.8511. We analyze the complexity of Grassmann mixing, show linear scaling in sequence length for fixed rank, and argue that such manifold-based designs offer a more structured route toward geometric and invariant-based interpretations of neural reasoning.

As multimodal large language models (MLLMs) advance rapidly, rigorous evaluation has become essential, providing further guidance for their development. In this work, we focus on a unified and robust evaluation of vision perception abilities, the foundational skill of MLLMs. We find that existing perception benchmarks, each focusing on different question types, domains, and evaluation metrics, introduce significant evaluation variance, complicating comprehensive assessments of perception abilities when relying on any single benchmark. To address this, we introduce AbilityLens, a unified benchmark designed to evaluate MLLMs across six key perception abilities, focusing on both accuracy and stability, with each ability encompassing diverse question types, domains, and metrics. With the assistance of AbilityLens, we: (1) identify the strengths and weaknesses of current models, highlighting stability patterns and revealing a notable performance gap between open-source and closed-source models; (2) introduce an online evaluation mode, which uncovers interesting ability conflict and early convergence phenomena during MLLM training; and (3) design a simple ability-specific model merging method that combines the best ability checkpoint from early training stages, effectively mitigating performance decline due to ability conflict. The benchmark and online leaderboard will be released soon.

Skills are a promising way to improve LLM agent capabilities without retraining, while keeping the added procedure reusable and controllable. However, high-quality skills are still largely written by hand. We introduce SkillGen, a multi-agent framework that synthesizes a single auditable skill from trajectories generated by a base agent. The output is a human-readable artifact that can be inspected before use. Rather than merely summarizing trajectories, SkillGen leverages contrastive induction over both successful and failed trajectories to identify reusable success patterns, recurring failure modes, and behaviors that appear in nearby successes but are missing from failures. SkillGen then generates candidate skills and iteratively refines the skill. A key novelty in SkillGen is that we model agent skills as interventions to empirically verify the net effect of skills on the overall performance. Specifically, we compare outcomes on the same instances with and without the skill, so that we account for both repairs (cases where the skill fixes a baseline failure) and regressions (cases where the skill breaks a baseline success). Across a broad range of agents and datasets, SkillGen consistently improves held-out performance, outperforms existing skill-generation baselines, and produces skills that transfer across models.

Although text-to-motion generation has achieved strong progress in synthesizing realistic single-person motions from language, extending it to text-driven 3D human-human interaction (HHI) remains non-trivial, as HHI requires modeling the underlying social structure that governs phase progression, actor roles, and inter-actor coordination. In this paper, we formulate HHI generation as a social structure modeling and grounding problem: the model must first infer how an interaction unfolds and how the two actors coordinate their roles, and then realize this structure as continuous, physically plausible, and partner-aware 3D motion. To study how such structure should be modeled, we first examine the capability boundary of large language models (LLMs) for HHI generation. Our analysis shows that LLMs can think by recovering phase decompositions and partner-aware roles, but cannot directly move, as they fail to generate dynamic, physically plausible, and interaction-aware motion. This motivates our planner-executor paradigm, Think with LLM, Move with Motion Skill. The LLM planner converts implicit interaction semantics into motion-aligned social supervision by decomposing interactions into phases, assigning partner-aware actor roles, and aligning them with motion sequence. The motion executor then grounds the planned social structure into coordinated two-person motion by adapting a pretrained solo motion model with LoRA, previous-phase self-conditioning, and ego-relative partner conditioning. Together, our Solo-to-Social framework bridges social organization and motion realization, producing 3D HHI with improved phase consistency, role alignment, and partner-aware coordination.

In this article, we develop an asymptotic method for constructing confidence regions for the set of all linear subspaces arising from PCA, from which we derive hypothesis tests on this set. Our method is based on the geometry of Riemannian manifolds with which some sets of linear subspaces are endowed.

The success of Hyper-Connections (HC) in neural networks (NN) has also highlighted issues related to its training instability and restricted scalability. The Manifold-Constrained Hyper-Connections (mHC) mitigate these challenges by projecting the residual connection space onto a Birkhoff polytope, however, it faces two issues: 1) its iterative Sinkhorn-Knopp (SK) algorithm does not always yield exact doubly stochastic residual matrices; 2) mHC incurs a prohibitive O(n^3C) parameter complexity with n as the width of the residual stream and C as the feature dimension. The recently proposed mHC-lite reparametrizes the residual matrix via the Birkhoff-von-Neumann theorem to guarantee double stochasticity, but also faces a factorial explosion in its parameter complexity, O left( nC cdot n! right). To address both challenges, we propose KromHC, which uses the Kronecker products of smaller doubly stochastic matrices to parametrize the residual matrix in mHC. By enforcing manifold constraints across the factor residual matrices along each mode of the tensorized residual stream, KromHC guarantees exact double stochasticity of the residual matrices while reducing parameter complexity to O(n^2C). Comprehensive experiments demonstrate that KromHC matches or even outperforms state-of-the-art (SOTA) mHC variants, while requiring significantly fewer trainable parameters. The code is available at https://github.com/wz1119/KromHC.

Abundant procedural knowledge on the Web holds great potential for helping agents solve long-horizon tasks. However, such knowledge is often multimodal, heterogeneous, noisy, and implicitly assumes human executors, making it difficult to use directly as the skills required by agents. To bridge the gap between human-oriented guides and agent-executable skills, we formalize this problem as guide-to-skill learning: converting in-the-wild guides into executable skills and continuously improving them from trajectories observable to the agent. To evaluate the capability of existing agents on this task, we introduce MMG2Skill-Bench, the first benchmark designed for this problem. We further propose MMG2Skill, a closed-loop framework that compiles guides into editable skills, conditions a fixed vision-language model (VLM) agent on these skills during execution, and revises the skills from trajectory-level root-cause feedback without using benchmark scores. Across GUI control, open-ended gameplay, and strategic card play with six VLM backbones, MMG2Skill consistently outperforms vanilla baseline agents in every model-domain setting, achieving macro-average gains of +12.8 to +25.3 percentage points across backbones. Ablation studies show that directly prompting agents with raw guides can degrade performance, while both structured skill construction and trajectory-driven revision are necessary for the observed improvements. On success-inferable tasks, analyzer-based early stopping further prevents late-stage performance regressions and saves 25%-53% of attempts when the success signal is properly calibrated.

This paper introduces the Manifold Probe, a supervised method for discovering representation manifolds in superposition. The method generalizes linear regression probes by learning the space of features of a concept that can be linearly predicted from the representations, and then learning the directions used to encode them. We demonstrate the probe on representations of time and space in Llama 2-7b, finding manifolds which linearly represent an interpretable set of features in each case. In the case of time, we show that by steering along the manifold, we can influence the model's completions about the years in which famous songs, movies and books were released, providing evidence that the Manifold Probe can discover manifolds which are causally involved in model behaviour.

Large language models generate computationally expensive yet semantically void reasoning on beyond-capability tasks, creating risks where plausible-sounding but incorrect derivations mislead users. We characterize this futile reasoning phenomenon through systematic analysis, revealing universal capability overreach and systematic miscalibration between capability and behavior. The dominant failure mode is specious reasoning, which outputs look superficially valid but contain subtle errors, escalating with task difficulty. To address this, we introduce CaRL (Capability-aligned Reinforcement Learning), which aligns model behavior with capability boundaries through reward shaping that incentivizes refusal over futile reasoning and hindsight refusal augmentation that converts failures into refusal supervision. Experiments demonstrate a substantial reduction in futile reasoning while preserving performance across task difficulties, effectively achieving capability-aligned behavior without sacrificing utility. https://github.com/icip-cas/Knowing-When-to-Quit

A neural network with the widely-used ReLU activation has been shown to partition the sample space into many convex polytopes for prediction. However, the parameterized way a neural network and other machine learning models use to partition the space has imperfections, e.g., the compromised interpretability for complex models, the inflexibility in decision boundary construction due to the generic character of the model, and the risk of being trapped into shortcut solutions. In contrast, although the non-parameterized models can adorably avoid or downplay these issues, they are usually insufficiently powerful either due to over-simplification or the failure to accommodate the manifold structures of data. In this context, we first propose a new type of machine learning models referred to as Manifoldron that directly derives decision boundaries from data and partitions the space via manifold structure discovery. Then, we systematically analyze the key characteristics of the Manifoldron such as manifold characterization capability and its link to neural networks. The experimental results on 4 synthetic examples, 20 public benchmark datasets, and 1 real-world application demonstrate that the proposed Manifoldron performs competitively compared to the mainstream machine learning models. We have shared our code in https://github.com/wdayang/Manifoldron for free download and evaluation.

Practitioners prune neural networks for efficiency gains and generalization improvements, but few scrutinize the factors determining the prunability of a neural network the maximum fraction of weights that pruning can remove without compromising the model's test accuracy. In this work, we study the properties of input data that may contribute to the prunability of a neural network. For high dimensional input data such as images, text, and audio, the manifold hypothesis suggests that these high dimensional inputs approximately lie on or near a significantly lower dimensional manifold. Prior work demonstrates that the underlying low dimensional structure of the input data may affect the sample efficiency of learning. In this paper, we investigate whether the low dimensional structure of the input data affects the prunability of a neural network.

LeWorldModel trains a latent world model with a prediction loss and a single anti-collapse regulariser, and reports approximately 87% of goals reached on TwoRoom, its simplest diagnostic environment. We reproduce that result by independent reimplementation on roughly $25 of rented compute, with all evaluation on one laptop CPU. We reach 94.0% at the repository's evaluation goal offset, against 84.0% for the authors' own released checkpoint measured under our protocol on identical episodes, and we reproduce the reported representation result directly (position probe Pearson r = 0.9988 against a reported 0.996). Reaching that point required four conventions that determine the outcome and appear in no released configuration file: dense action gathering across a frameskip block, a programmatically-set action-encoder width, ImageNet pixel normalisation, and action z-scoring. A reproducer following the released configurations alone obtains a model whose predictor cannot converge. The evaluation protocol is itself contested by the released material. The paper's appendix and the repository's configuration specify different goal offsets and step budgets; on the authors' own weights these yield 14.0% and 84.0%, and only the configuration's values reproduce the reported figure. On fifty identical episodes, changing nothing but how the goal is constructed moves that checkpoint from 84.0% to 8.0%. Two findings generalise. One-step prediction accuracy does not predict long-horizon planning success: across three checkpoints spanning a sevenfold range in prediction error, including the authors' own, it orders short-horizon success monotonically and fails to order long-horizon success at all. And a batch normalisation layer inflated our reported validation loss by up to a factor of 300, concealing a training loss that was flat throughout.

Vision-Language-Action (VLA) models leverage powerful perceptual priors from web-scale Vision-Language Model (VLM) pre-training, yet they remain surprisingly brittle in practice, frequently failing at simple robotic tasks. To mitigate this, we propose Contrastive Conceptor Activation Steering (COAST). COAST builds on the notion of a "conceptor", a linear operator that soft-projects data into the principal components of a target distribution. COAST uses conceptors to identify success-critical subspaces for a target robotic task from a few examples of success and failure rollouts. At inference time, it steers VLA latents into these identified success subspaces to improve task outcomes. Across three architecturally distinct neural policies (flow-matching VLA, autoregressive VLA, and Diffusion Policy), COAST improves absolute mean simulation and real-robot task success rate by over 20 and 40% respectively. The activation subspace geometry reveals that failure modes share substantial structure across tasks while success representations remain largely task-specific. When tasks share similar failure modes, this structure enables previously fitted conceptors to improve performance on new tasks without refitting. Ultimately, our results suggest that current VLAs retain substantial task-relevant knowledge in their latent representations, and that the action expert's decoding bottleneck could be mitigated by steering its residual stream toward task-relevant subspaces. COAST provides a lightweight, training-free path to unlocking these latent capabilities by steering the model towards its own "success" distributions.

We study optimization problems on Hadamard manifolds, motivated by recent advances in geometric approaches to optimization on curved spaces, particularly those involving the structure of Busemann functions. We introduce a projection based variant of the proximal point algorithm, termed the Busemann hybrid projection proximal point algorithm, which replaces Euclidean hyperplanes with horospheres defined via convex Busemann functions. The algorithm performs projections in closed form using the gradients of these functions, resulting in a geometrically intrinsic scheme that requires no tangent space linear solves. We allow for inexact subgradient evaluations and prove global convergence under controlled inexactness, with a relative error level strictly below one. We establish a Fejér type descent and sublinear complexity with a rate proportional to the inverse square root of the iteration count, and show that the exact variant coincides with the classical Riemannian proximal point algorithm. The framework clarifies the role of Busemann based subdifferentials in optimization on spaces of nonpositive curvature.

Despite its promise, imitation learning often fails in long-horizon environments where perfect replication of demonstrations is unrealistic and small errors can accumulate catastrophically. We introduce Cago (Capability-Aware Goal Sampling), a novel learning-from-demonstrations method that mitigates the brittle dependence on expert trajectories for direct imitation. Unlike prior methods that rely on demonstrations only for policy initialization or reward shaping, Cago dynamically tracks the agent's competence along expert trajectories and uses this signal to select intermediate steps--goals that are just beyond the agent's current reach--to guide learning. This results in an adaptive curriculum that enables steady progress toward solving the full task. Empirical results demonstrate that Cago significantly improves sample efficiency and final performance across a range of sparse-reward, goal-conditioned tasks, consistently outperforming existing learning from-demonstrations baselines.

In representation learning, uniformity refers to the uniform feature distribution in the latent space (i.e., unit hypersphere). Previous work has shown that improving uniformity contributes to the learning of under-represented classes. However, most of the previous work focused on classification; the representation space of imbalanced regression remains unexplored. Classification-based methods are not suitable for regression tasks because they cluster features into distinct groups without considering the continuous and ordered nature essential for regression. In a geometric aspect, we uniquely focus on ensuring uniformity in the latent space for imbalanced regression through two key losses: enveloping and homogeneity. The enveloping loss encourages the induced trace to uniformly occupy the surface of a hypersphere, while the homogeneity loss ensures smoothness, with representations evenly spaced at consistent intervals. Our method integrates these geometric principles into the data representations via a Surrogate-driven Representation Learning (SRL) framework. Experiments with real-world regression and operator learning tasks highlight the importance of uniformity in imbalanced regression and validate the efficacy of our geometry-based loss functions.

Agent skills, structured procedural knowledge packages injected at inference time, are increasingly used to augment LLM agents on software engineering tasks. However, their real utility in end-to-end development settings remains unclear. We present SWE-Skills-Bench, the first requirement-driven benchmark that isolates the marginal utility of agent skills in real-world software engineering (SWE). It pairs 49 public SWE skills with authentic GitHub repositories pinned at fixed commits and requirement documents with explicit acceptance criteria, yielding approximately 565 task instances across six SWE subdomains. We introduce a deterministic verification framework that maps each task's acceptance criteria to execution-based tests, enabling controlled paired evaluation with and without the skill. Our results show that skill injection benefits are far more limited than rapid adoption suggests: 39 of 49 skills yield zero pass-rate improvement, and the average gain is only +1.2%. Token overhead varies from modest savings to a 451% increase while pass rates remain unchanged. Only seven specialized skills produce meaningful gains (up to +30%), while three degrade performance (up to -10%) due to version-mismatched guidance conflicting with project context. These findings suggest that agent skills are a narrow intervention whose utility depends strongly on domain fit, abstraction level, and contextual compatibility. SWE-Skills-Bench provides a testbed for evaluating the design, selection, and deployment of skills in software engineering agents. SWE-Skills-Bench is available at https://github.com/GeniusHTX/SWE-Skills-Bench.

Skills are a natural unit for describing what a language model can do and how its behavior can be changed. However, existing characterizations rely on human-written taxonomies, textual descriptions, or manual profiling pipelines--all external hypotheses about what matters that need not align with the model's internal representations. We argue that when the goal is to intervene on model behavior, skill characterization should be *model-native*: grounded in the model's own representations rather than imposed through external ontologies. We instantiate this view by recovering a compact orthogonal basis from sequence-level activations. The resulting basis is semantically interpretable but need not correspond to any predefined human ontology; instead, it captures axes of behavioral variation that the model itself organizes around. We validate this characterization on reasoning post-training, using the recovered basis for both SFT data selection and inference-time steering. We develop lightweight proxy interventions to identify which directions are most useful for a given model. Across Llama3-8B and Qwen2.5-3B, selecting data along those directions improves Pass@1 by up to 20% on MATH and 41% on AMC, outperforming data selection based on human-characterized skills. Because the basis lives in activation space, the same directions also serve as steering vectors at inference time, improving Pass@8 by up to 4.8% on MATH--an intervention that human-characterized skills cannot support. We further validate the characterization on safety alignment, where selecting adversarial training data for model-native skill coverage rather than textual diversity yields more sample-efficient learning. These results suggest that recovering skills from the model's own representations, rather than imposing them externally, provides a more effective foundation for intervening on model behavior. Codes are open-sourced.

Assessing learner competency in clinical simulation requires expert observation that is time-intensive, difficult to scale, and subject to inter-rater variability. Vision-language models have emerged as a promising tool for understanding complex visual behavior. In this work, we investigate whether visual observations can provide educationally meaningful signals for competency assessment through a three-stage framework that (1) extracts action timelines from egocentric nursing simulation video using frozen visual encoders and few-shot learning, (2) derives sequence-level features and per-session recognition metrics, and (3) relates these to instructor-rated competency. Across 22 densely annotated sessions (3.8 hours, 493 actions), a frozen DINOv2 backbone with HMM Viterbi decoding achieves 57.4% MOF in leave-one-out 1-shot recognition. Surprisingly, we observe a negative trend between recognition accuracy and competency (rho = -0.524, p = 0.012 for mIoU), robust to six confound controls: more competent students produce diverse, harder-to-classify workflows, while simple sequence features show no such relationship. Per-item analysis identifies patient safety protocols and team communication as the expected behaviors most reflected in this pattern, and process model comparisons reveal that higher-competency students exhibit more protocol-consistent action transitions. These findings suggest that recognition accuracy may complement predicted action timelines as a pedagogically informative signal in automated competency assessment.

Continual learning aims to avoid catastrophic forgetting and effectively leverage learned experiences to master new knowledge. Existing gradient projection approaches impose hard constraints on the optimization space for new tasks to minimize interference, which simultaneously hinders forward knowledge transfer. To address this issue, recent methods reuse frozen parameters with a growing network, resulting in high computational costs. Thus, it remains a challenge whether we can improve forward knowledge transfer for gradient projection approaches using a fixed network architecture. In this work, we propose the Restricted Orthogonal Gradient prOjection (ROGO) framework. The basic idea is to adopt a restricted orthogonal constraint allowing parameters optimized in the direction oblique to the whole frozen space to facilitate forward knowledge transfer while consolidating previous knowledge. Our framework requires neither data buffers nor extra parameters. Extensive experiments have demonstrated the superiority of our framework over several strong baselines. We also provide theoretical guarantees for our relaxing strategy.

Building general-purpose embodied agents across diverse hardware remains a central challenge in robotics, often framed as the ''one-brain, many-forms'' paradigm. Progress is hindered by fragmented data, inconsistent representations, and misaligned training objectives. We present ABot-M0, a framework that builds a systematic data curation pipeline while jointly optimizing model architecture and training strategies, enabling end-to-end transformation of heterogeneous raw data into unified, efficient representations. From six public datasets, we clean, standardize, and balance samples to construct UniACT-dataset, a large-scale dataset with over 6 million trajectories and 9,500 hours of data, covering diverse robot morphologies and task scenarios. Unified pre-training improves knowledge transfer and generalization across platforms and tasks, supporting general-purpose embodied intelligence. To improve action prediction efficiency and stability, we propose the Action Manifold Hypothesis: effective robot actions lie not in the full high-dimensional space but on a low-dimensional, smooth manifold governed by physical laws and task constraints. Based on this, we introduce Action Manifold Learning (AML), which uses a DiT backbone to predict clean, continuous action sequences directly. This shifts learning from denoising to projection onto feasible manifolds, improving decoding speed and policy stability. ABot-M0 supports modular perception via a dual-stream mechanism that integrates VLM semantics with geometric priors and multi-view inputs from plug-and-play 3D modules such as VGGT and Qwen-Image-Edit, enhancing spatial understanding without modifying the backbone and mitigating standard VLM limitations in 3D reasoning. Experiments show components operate independently with additive benefits. We will release all code and pipelines for reproducibility and future research.

LLM agents acting in structured environments fail in operational rather than conversational ways, and reliability depends on procedural knowledge of the environment. Prior self-improvement methods accumulate natural-language guidance without checking that each new item preserves previously correct behavior, so a note that fixes one trajectory can silently regress another. We introduce GRASP (Gated Regression-Aware Skill Proposer), which treats agent improvement as a sequence of edits to a bounded skill library, admitting each candidate only if it produces a net improvement on a balanced held-out probe under a hard regression budget. We evaluate GRASP across five base models (gpt-oss-120b, DeepSeek V4 Flash, Gemini 3.1 Flash Lite, GPT-4.1, GPT-5.4) on two FHIR-based clinical benchmarks. On MedAgentBench, GRASP lifts gpt-oss-120b from 40.6% to 88.8%, exceeds the strongest of five self-improvement baselines by 21.0 points, and improves every other base model by 17.2 to 40.3 points. Ablations attribute the gain to comparative proposal generation, the acceptance gate, and the hard regression budget rather than to skill writing itself, which without validation is no better than using no skills. The mechanism generalizes beyond the clinical domain, improving agents on three of four non-clinical environments and remaining flat only where the action space is open-ended. Frozen libraries transfer across models, where skills from a stronger model improve weaker executors beyond what they learn for themselves while the reverse does not, an asymmetry that no ungated baseline reproduces.

Humans build shared spatial understanding by communicating partial, viewpoint-dependent observations. We ask whether Multimodal Large Language Models (MLLMs) can do the same, aligning distinct egocentric views through dialogue to form a coherent, allocentric mental model of a shared environment. To study this systematically, we introduce COSMIC, a benchmark for Collaborative Spatial Communication. In this setting, two static MLLM agents observe a 3D indoor environment from different viewpoints and exchange natural-language messages to solve spatial queries. COSMIC contains 899 diverse scenes and 1250 question-answer pairs spanning five tasks. We find a consistent capability hierarchy, MLLMs are most reliable at identifying shared anchor objects across views, perform worse on relational reasoning, and largely fail at building globally consistent maps, performing near chance, even for the frontier models. Moreover, we find thinking capability yields consistent gains in anchor grounding, but is insufficient for higher-level spatial communication. To contextualize model behavior, we additionally collect 250 human-human dialogues. Humans achieve 95% aggregate accuracy, leaving significant room for improvement for even the best performing model Gemini-3-Pro-Thinking which achieves 72% aggregate accuracy. Moreover, human conversations become increasingly specific as partners converge on a shared mental model, whereas model dialogues continue to explore new possibilities rather than converging, consistent with a limited ability to build and maintain a robust shared mental model. Our code and data is available at https://github.com/ankursikarwar/Cosmic

Small sample sizes are common in many disciplines, which necessitates pooling roughly similar datasets across multiple institutions to study weak but relevant associations between images and disease outcomes. Such data often manifest shift/imbalance in covariates (i.e., secondary non-imaging data). Controlling for such nuisance variables is common within standard statistical analysis, but the ideas do not directly apply to overparameterized models. Consequently, recent work has shown how strategies from invariant representation learning provides a meaningful starting point, but the current repertoire of methods is limited to accounting for shifts/imbalances in just a couple of covariates at a time. In this paper, we show how viewing this problem from the perspective of Category theory provides a simple and effective solution that completely avoids elaborate multi-stage training pipelines that would otherwise be needed. We show the effectiveness of this approach via extensive experiments on real datasets. Further, we discuss how this style of formulation offers a unified perspective on at least 5+ distinct problem settings, from self-supervised learning to matching problems in 3D reconstruction.

We consider the problem of simultaneously clustering and learning a linear representation of data lying close to a union of low-dimensional manifolds, a fundamental task in machine learning and computer vision. When the manifolds are assumed to be linear subspaces, this reduces to the classical problem of subspace clustering, which has been studied extensively over the past two decades. Unfortunately, many real-world datasets such as natural images can not be well approximated by linear subspaces. On the other hand, numerous works have attempted to learn an appropriate transformation of the data, such that data is mapped from a union of general non-linear manifolds to a union of linear subspaces (with points from the same manifold being mapped to the same subspace). However, many existing works have limitations such as assuming knowledge of the membership of samples to clusters, requiring high sampling density, or being shown theoretically to learn trivial representations. In this paper, we propose to optimize the Maximal Coding Rate Reduction metric with respect to both the data representation and a novel doubly stochastic cluster membership, inspired by state-of-the-art subspace clustering results. We give a parameterization of such a representation and membership, allowing efficient mini-batching and one-shot initialization. Experiments on CIFAR-10, -20, -100, and TinyImageNet-200 datasets show that the proposed method is much more accurate and scalable than state-of-the-art deep clustering methods, and further learns a latent linear representation of the data.

Remarkable advances have been achieved recently in learning neural representations that characterize object geometry, while generating textured objects suitable for downstream applications and 3D rendering remains at an early stage. In particular, reconstructing textured geometry from images of real objects is a significant challenge -- reconstructed geometry is often inexact, making realistic texturing a significant challenge. We present Mesh2Tex, which learns a realistic object texture manifold from uncorrelated collections of 3D object geometry and photorealistic RGB images, by leveraging a hybrid mesh-neural-field texture representation. Our texture representation enables compact encoding of high-resolution textures as a neural field in the barycentric coordinate system of the mesh faces. The learned texture manifold enables effective navigation to generate an object texture for a given 3D object geometry that matches to an input RGB image, which maintains robustness even under challenging real-world scenarios where the mesh geometry approximates an inexact match to the underlying geometry in the RGB image. Mesh2Tex can effectively generate realistic object textures for an object mesh to match real images observations towards digitization of real environments, significantly improving over previous state of the art.

Spatial intelligence is crucial for vision--language models (VLMs) in the physical world, yet many benchmarks evaluate largely unconstrained scenes where models can exploit 2D shortcuts. We introduce SSI-Bench, a VQA benchmark for spatial reasoning on constrained manifolds, built from complex real-world 3D structures whose feasible configurations are tightly governed by geometric, topological, and physical constraints. SSI-Bench contains 1,000 ranking questions spanning geometric and topological reasoning and requiring a diverse repertoire of compositional spatial operations, such as mental rotation, cross-sectional inference, occlusion reasoning, and force-path reasoning. It is created via a fully human-centered pipeline: ten researchers spent over 400 hours curating images, annotating structural components, and designing questions to minimize pixel-level cues. Evaluating 31 widely used VLMs reveals a large gap to humans: the best open-source model achieves 22.2% accuracy and the strongest closed-source model reaches 33.6%, while humans score 91.6%. Encouraging models to think yields only marginal gains, and error analysis points to failures in structural grounding and constraint-consistent 3D reasoning. Project page: https://ssi-bench.github.io.

Recent advances in diffusion and flow matching models have highlighted a shift in the preferred prediction target -- moving from noise (varepsilon) and velocity (v) to direct data (x) prediction -- particularly in high-dimensional settings. However, a formal explanation of why the optimal target depends on the specific properties of the data remains elusive. In this work, we provide a theoretical framework based on a generalized prediction formulation that accommodates arbitrary output targets, of which varepsilon-, v-, and x-prediction are special cases. We derive the analytical relationship between data's geometry and the optimal prediction target, offering a rigorous justification for why x-prediction becomes superior when the ambient dimension significantly exceeds the data's intrinsic dimension. Furthermore, while our theory identifies dimensionality as the governing factor for the optimal prediction target, the intrinsic dimension of manifold-bound data is typically intractable to estimate in practice. To bridge this gap, we propose k-Diff, a framework that employs a data-driven approach to learn the optimal prediction parameter k directly from data, bypassing the need for explicit dimension estimation. Extensive experiments in both latent-space and pixel-space image generation demonstrate that k-Diff consistently outperforms fixed-target baselines across varying architectures and data scales, providing a principled and automated approach to enhancing generative performance.

Generative models have achieved success in producing semantically plausible 2D images, but it remains challenging in 3D generation due to the absence of spatial geometry constraints. Typically, existing methods utilize geometric features as conditions to enhance spatial awareness. However, these methods can only model relative relationships and are prone to scale inconsistency of absolute geometry. Thus, we argue that semantic information and absolute geometry empower 3D cognition, thereby enabling controllable 3D generation for the physical world. In this work, we propose Cog2Gen3D, a 3D cognition-guided diffusion framework for 3D generation. Our model is guided by three key designs: 1) Cognitive Feature Embeddings. We encode different modalities into semantic and geometric representations and further extract logical representations. 2) 3D Latent Cognition Graph. We structure different representations into dual-stream semantic-geometric graphs and fuse them via common-based cross-attention to obtain a 3D cognition graph. 3) Cognition-Guided Latent Diffusion. We leverage the fused 3D cognition graph as the condition to guide the latent diffusion process for 3D Gaussian generation. Under this unified framework, the 3D cognition graph ensures the physical plausibility and structural rationality of 3D generation. Moreover, we construct a validation subset based on the Marble World Labs. Extensive experiments demonstrate that our Cog2Gen3D significantly outperforms existing methods in both semantic fidelity and geometric plausibility.

Recent LLM agents benefit from skills for solving complex tasks. Skills encapsulate modular packages of procedural knowledge and instructions for performing specialized tasks, such as setting up a sandboxed environment, running a test suite, or refactoring a function across multiple files. As skill libraries grow and become reusable across tasks and domains, selecting an appropriate skill composition has emerged as a central bottleneck. Existing approaches fall into two categories. One exposes the agent's reasoning to the entire skill collection; the other performs skill retrieval via embeddings or LLM-based rerankers. Both provide useful insights; however, they miss the structural nature of skill composition, which is a joint decision over which skills, how many, and in what order -- three dimensions that cannot be decoupled. We formalize this as structured skill composition: given a task and a skill library, predict an executable skill plan that jointly specifies the activated subset, count, and execution order. We propose SkillComposer, which instantiates structured skill composition as task-conditioned skill sequence prediction. SkillComposer uses a constrained autoregressive decoder over skill identifiers, so subset, count, and order emerge jointly from a single decoding pass, and dependencies between successive skills are captured naturally. We build a training set of task-composition pairs from a real, human-curated skill library. We then evaluate SkillComposer along two axes: composition quality on a held-out test set, and downstream task success on SkillsBench across two production-grade coding agents. On GPT-5.2-Codex, Gemini-3-Pro-Preview, SkillComposer raises the pass rate by +23.1, +18.2pp over the no-skill baseline, surpassing top-3 retrieval and matching the gold-skill retrieval upper bound at lower prompt-token cost.

Reliable deployment of language models requires two capabilities that appear distinct but share a common geometric foundation: predicting whether a model will accept targeted behavioral control, and detecting when its internal structure degrades. We show that geometric stability, the consistency of a representation's pairwise distance structure, addresses both. Supervised Shesha variants that measure task-aligned geometric stability predict linear steerability with near-perfect accuracy (ρ= 0.89-0.97) across 35-69 embedding models and three NLP tasks, capturing unique variance beyond class separability (partial ρ= 0.62-0.76). A critical dissociation emerges: unsupervised stability fails entirely for steering on real-world tasks (ρapprox 0.10), revealing that task alignment is essential for controllability prediction. However, unsupervised stability excels at drift detection, measuring nearly 2times greater geometric change than CKA during post-training alignment (up to 5.23times in Llama) while providing earlier warning in 73\% of models and maintaining a 6times lower false alarm rate than Procrustes. Together, supervised and unsupervised stability form complementary diagnostics for the LLM deployment lifecycle: one for pre-deployment controllability assessment, the other for post-deployment monitoring.

Uniformity plays a crucial role in the assessment of learned representations, contributing to a deeper comprehension of self-supervised learning. The seminal work by Wang2020UnderstandingCR introduced a uniformity metric that quantitatively measures the collapse degree of learned representations. Directly optimizing this metric together with alignment proves to be effective in preventing constant collapse. However, we present both theoretical and empirical evidence revealing that this metric lacks sensitivity to dimensional collapse, highlighting its limitations. To address this limitation and design a more effective uniformity metric, this paper identifies five fundamental properties, some of which the existing uniformity metric fails to meet. We subsequently introduce a novel uniformity metric that satisfies all of these desiderata and exhibits sensitivity to dimensional collapse. When applied as an auxiliary loss in various established self-supervised methods, our proposed uniformity metric consistently enhances their performance in downstream tasks.Our code was released at https://github.com/sunset-clouds/WassersteinUniformityMetric.

We develop information geometric techniques to understand the representations learned by deep networks when they are trained on different tasks using supervised, meta-, semi-supervised and contrastive learning. We shed light on the following phenomena that relate to the structure of the space of tasks: (1) the manifold of probabilistic models trained on different tasks using different representation learning methods is effectively low-dimensional; (2) supervised learning on one task results in a surprising amount of progress even on seemingly dissimilar tasks; progress on other tasks is larger if the training task has diverse classes; (3) the structure of the space of tasks indicated by our analysis is consistent with parts of the Wordnet phylogenetic tree; (4) episodic meta-learning algorithms and supervised learning traverse different trajectories during training but they fit similar models eventually; (5) contrastive and semi-supervised learning methods traverse trajectories similar to those of supervised learning. We use classification tasks constructed from the CIFAR-10 and Imagenet datasets to study these phenomena.

We investigate the relationship between representation geometry and neural network performance. Analyzing 52 pretrained ImageNet models across 13 architecture families, we show that effective dimension -- an unsupervised geometric metric -- strongly predicts accuracy. Output effective dimension achieves partial r=0.75 (p < 10^(-10)) after controlling for model capacity, while total compression achieves partial r=-0.72. These findings replicate across ImageNet and CIFAR-10, and generalize to NLP: effective dimension predicts performance for 8 encoder models on SST-2/MNLI and 15 decoder-only LLMs on AG News (r=0.69, p=0.004), while model size does not (r=0.07). We establish bidirectional causality: degrading geometry via noise causes accuracy loss (r=-0.94, p < 10^(-9)), while improving geometry via PCA maintains accuracy across architectures (-0.03pp at 95% variance). This relationship is noise-type agnostic -- Gaussian, Uniform, Dropout, and Salt-and-pepper noise all show |r| > 0.90. These results establish that effective dimension provides domain-agnostic predictive and causal information about neural network performance, computed entirely without labels.

The era of foundation models has revolutionized AI research, yet Graph Foundation Models (GFMs) remain constrained by the scarcity of large-scale graph corpora. Traditional graph data synthesis techniques primarily focus on simplistic structural operations, lacking the capacity to generate semantically rich nodes with meaningful textual attributes: a critical limitation for real-world applications. While large language models (LLMs) demonstrate exceptional text generation capabilities, their direct application to graph synthesis is impeded by context window limitations, hallucination phenomena, and structural consistency challenges. To address these issues, we introduce GraphMaster, the first multi-agent framework specifically designed for graph data synthesis in data-limited environments. GraphMaster orchestrates four specialized LLM agents (Manager, Perception, Enhancement, and Evaluation) that collaboratively optimize the synthesis process through iterative refinement, ensuring both semantic coherence and structural integrity. To rigorously evaluate our approach, we create new data-limited "Sub" variants of six standard graph benchmarks, specifically designed to test synthesis capabilities under realistic constraints. Additionally, we develop a novel interpretability assessment framework that combines human evaluation with a principled Grassmannian manifold-based analysis, providing both qualitative and quantitative measures of semantic coherence. Experimental results demonstrate that GraphMaster significantly outperforms traditional synthesis methods across multiple datasets, establishing a strong foundation for advancing GFMs in data-scarce environments.

Representation engineering methods have recently shown promise for enabling efficient steering of model behavior. However, evaluation pipelines for these methods have primarily relied on subjective demonstrations, instead of quantitative, objective metrics. We aim to take a step towards addressing this issue by advocating for four properties missing from current evaluations: (i) contexts sufficiently similar to downstream tasks should be used for assessing intervention quality; (ii) model likelihoods should be accounted for; (iii) evaluations should allow for standardized comparisons across different target behaviors; and (iv) baseline comparisons should be offered. We introduce an evaluation pipeline grounded in these criteria, offering both a quantitative and visual analysis of how effectively a given method works. We use this pipeline to evaluate two representation engineering methods on how effectively they can steer behaviors such as truthfulness and corrigibility, finding that some interventions are less effective than previously reported.

The foundational pretraining phase determines a model's capability ceiling, as post-training struggles to overcome capability foundations established during pretraining, yet it remains critically under-explored. This stems from a structural paradox: organizations with computational resources operate under commercial pressures that inhibit transparent disclosure, while academic institutions possess research freedom but lack pretraining-scale computational resources. daVinci-LLM occupies this unexplored intersection, combining industrial-scale resources with full research freedom to advance the science of pretraining. We adopt a fully-open paradigm that treats openness as scientific methodology, releasing complete data processing pipelines, full training processes, and systematic exploration results. Recognizing that the field lacks systematic methodology for data processing, we employ the Data Darwinism framework, a principled L0-L9 taxonomy from filtering to synthesis. We train a 3B-parameter model from random initialization across 8T tokens using a two-stage adaptive curriculum that progressively shifts from foundational capabilities to reasoning-intensive enhancement. Through 200+ controlled ablations, we establish that: processing depth systematically enhances capabilities, establishing it as a critical dimension alongside volume scaling; different domains exhibit distinct saturation dynamics, necessitating adaptive strategies from proportion adjustments to format shifts; compositional balance enables targeted intensification while preventing performance collapse; how evaluation protocol choices shape our understanding of pretraining progress. By releasing the complete exploration process, we enable the community to build upon our findings and systematic methodologies to form accumulative scientific knowledge in pretraining.

Despite recent advances in unified multimodal models for multi-reference image generation, existing benchmarks remain organized around predefined task types (e.g., "subject composition"), which are ill-suited to this combinatorial setting and lead to fragmented coverage, uncontrolled complexity, and little diagnostic value. Recognizing that diverse multi-reference tasks share a common set of atomic operations, we adopt a capability-oriented perspective and formalize four operators: Anchor (f), Disentangle (g), Apply (oplus), and Compose (C). Any multi-reference prompt can then be represented as a compositional formula over these operators, whose structural complexity is quantified by the number of operator slots. Building on this formulation, we construct TRACE-Bench, comprising approximately 1,600 evaluation cases across slot counts 1--8, built from 631 formula templates and around 4,000 reference images spanning diverse artistic styles and real-world subjects. The formula structure directly drives an operator-aligned evaluation protocol for per-capability scoring and a diagnostic tree analysis for recursive failure localization. Evaluating 9 leading models reveals insights invisible to holistic scoring: the primary bottleneck lies in disentanglement (g) and attribute binding (oplus) rather than scene-level composition (C), with even the best model scoring only 0.74 on attribute fidelity. Project page: https://amuseum-whr.github.io/TraceBench

Flow matching with x-prediction -- regressing the clean data point rather than the ambient velocity -- is known to exploit low-dimensional manifold structure effectively in pixel space li2025back. We ask whether a pretrained representation space, while containing a low-dimensional data manifold of comparable intrinsic dimensionality, offers a distribution more favorable for flow-matching learning. Comparing pixel, SD-VAE, and DINOv2 features along four geometric axes, we find that pixel and DINOv2 share nearly identical intrinsic dimensionalities (both d!approx!33) yet DINOv2 exhibits 7.3times higher effective rank, 35times better covariance conditioning, 11.5times lower excess kurtosis, and 1.7times lower on-manifold interpolation error; SD-VAE latents are consistently intermediate, indicating that the advantage stems from representation-learning objectives rather than mere compression. These statistical properties render the flow-matching regression well-conditioned and remove the need for the specialized prediction heads or Riemannian transport used by prior DINOv2 diffusion methods. We propose the Representation Image Transformer (RiT): a vanilla Diffusion Transformer trained by x-prediction on frozen DINOv2 features, augmented only by a dimension-aware noise schedule and joint [CLS]-patch modeling. On ImageNet 256{times}256, RiT attains FID 1.45 without guidance and 1.14 with classifier-free guidance, outperforming DiT^DH-XL with 19% fewer parameters (676M vs.\ 839M). The resulting ODE is efficiently solvable at coarse discretizations: with classifier-free guidance, 5 Heun steps already reach FID 2.0 and 10 steps reach 1.25, without distillation or consistency training. Code at https://github.com/lezhang7/RiT.

LLM agents increasingly adapt to recurring tasks by accumulating procedural knowledge in skills. These skills are lightweight, reusable textual artifacts that are loaded into the agent's context without weight updates. Recent methods refine skills through iterative task execution, failure diagnosis, and trajectory-guided text-space updates. However, existing frameworks lack explicit diagnosis--outcome feedback and treat deletion as a generic edit operation rather than a dedicated mechanism for consolidating accumulated knowledge. We introduce SkillProx, a proximal-gradient-inspired forward--backward framework that couples closed-loop diagnostic evolution with utility-aware proximal refinement. Motivated by a composite objective balancing task loss and skill complexity, the forward stage re-executes diagnosis-driven edits on the same task batch, rolls back regressions, and feeds measured outcomes into subsequent diagnoses. The backward stage decomposes the resulting skill into auditable knowledge units, estimates their contributions using a frozen leave-one-out utility audit, and applies validation-gated consolidation, demotion, or removal. Experiments on in-distribution and out-of-distribution benchmarks across multiple backbone LLMs show that SkillProx improves average accuracy by 3.0 percentage points over the strongest gradient-based baseline. Component ablations demonstrate the complementary effects of closed-loop diagnosis and proximal refinement.

Tokenizers are a crucial component of latent diffusion models, as they define the latent space in which diffusion models operate. However, existing tokenizers are primarily designed to improve reconstruction fidelity or inherit pretrained representations, leaving unclear what kind of latent space is truly friendly for generative modeling. In this paper, we study this question from the perspective of latent manifold organization. By constructing controlled tokenizer variants, we identify three key properties of a diffusion-friendly latent manifold: coherent spatial structure, local manifold continuity, and global manifold semantics. We find that these properties are more consistent with downstream generation quality than reconstruction fidelity. Motivated by this finding, we propose the Prior-Aligned AutoEncoder (PAE), which explicitly shapes the latent manifold instead of leaving diffusion-friendly manifold to emerge indirectly from reconstruction or inheritance. Specifically, PAE leverages refined priors derived from VFMs and perturbation-based regularization to turn spatial structure, local continuity, and global semantics into explicit training objectives. On ImageNet 256x256, PAE improves both training efficiency and generation quality over existing tokenizers, reaching performance comparable to RAE with up to 13x faster convergence under the same training setup and achieving a new state-of-the-art gFID of 1.03. These results highlight the importance of organizing the latent manifold for latent diffusion models.

Sparse autoencoders (SAEs) are widely used to extract interpretable features from neural network representations, often under the implicit assumption that concepts correspond to independent linear directions. However, a growing body of evidence suggests that many concepts are instead organized along low-dimensional manifolds encoding continuous geometric relationships. This raises three basic questions: what does it mean for an SAE to capture a manifold, when do existing SAE architectures do so, and how? We develop a theoretical framework that answers these questions and show that SAEs can capture manifolds in two fundamentally different ways: globally, by allocating a compact group of atoms whose linear span contains the entire manifold, or locally, by distributing it across features that each selectively tile a restricted region of the underlying geometry. Empirically, we find that SAEs suboptimally recover continuous structures, mixing the global subspace and local tiling solutions in a fragmented regime we call dilution. This explains why manifold structure is rarely visible at the level of individual concepts and motivates post-hoc unsupervised discovery methods that search for coherent groups of atoms rather than isolated directions. More broadly, our results suggest that future representation learning methods should treat geometric objects, not just individual directions, as the basic units of interpretability.

Achieving human-level competitive intelligence and physical agility in humanoid robots remains a major challenge, particularly in contact-rich and highly dynamic tasks such as boxing. While Multi-Agent Reinforcement Learning (MARL) offers a principled framework for strategic interaction, its direct application to humanoid control is hindered by high-dimensional contact dynamics and the absence of strong physical motion priors. We propose RoboStriker, a hierarchical three-stage framework that enables fully autonomous humanoid boxing by decoupling high-level strategic reasoning from low-level physical execution. The framework first learns a comprehensive repertoire of boxing skills by training a single-agent motion tracker on human motion capture data. These skills are subsequently distilled into a structured latent manifold, regularized by projecting the Gaussian-parameterized distribution onto a unit hypersphere. This topological constraint effectively confines exploration to the subspace of physically plausible motions. In the final stage, we introduce Latent-Space Neural Fictitious Self-Play (LS-NFSP), where competing agents learn competitive tactics by interacting within the latent action space rather than the raw motor space, significantly stabilizing multi-agent training. Experimental results demonstrate that RoboStriker achieves superior competitive performance in simulation and exhibits sim-to-real transfer. Our website is available at RoboStriker.

Recently, diffusion models have been used to solve various inverse problems in an unsupervised manner with appropriate modifications to the sampling process. However, the current solvers, which recursively apply a reverse diffusion step followed by a projection-based measurement consistency step, often produce suboptimal results. By studying the generative sampling path, here we show that current solvers throw the sample path off the data manifold, and hence the error accumulates. To address this, we propose an additional correction term inspired by the manifold constraint, which can be used synergistically with the previous solvers to make the iterations close to the manifold. The proposed manifold constraint is straightforward to implement within a few lines of code, yet boosts the performance by a surprisingly large margin. With extensive experiments, we show that our method is superior to the previous methods both theoretically and empirically, producing promising results in many applications such as image inpainting, colorization, and sparse-view computed tomography. Code available https://github.com/HJ-harry/MCG_diffusion

Sparse roadmaps are important to compactly represent state spaces, to determine problems to be infeasible and to terminate in finite time. However, sparse roadmaps do not scale well to high-dimensional planning problems. In prior work, we showed improved planning performance on high-dimensional planning problems by using multilevel abstractions to simplify state spaces. In this work, we generalize sparse roadmaps to multilevel abstractions by developing a novel algorithm, the sparse multilevel roadmap planner (SMLR). To this end, we represent multilevel abstractions using the language of fiber bundles, and generalize sparse roadmap planners by using the concept of restriction sampling with visibility regions. We argue SMLR to be probabilistically complete and asymptotically near-optimal by inheritance from sparse roadmap planners. In evaluations, we outperform sparse roadmap planners on challenging planning problems, in particular problems which are high-dimensional, contain narrow passages or are infeasible. We thereby demonstrate sparse multilevel roadmaps as an efficient tool for feasible and infeasible high-dimensional planning problems.

Learning the distribution of data on Riemannian manifolds is crucial for modeling data from non-Euclidean space, which is required by many applications in diverse scientific fields. Yet, existing generative models on manifolds suffer from expensive divergence computation or rely on approximations of heat kernel. These limitations restrict their applicability to simple geometries and hinder scalability to high dimensions. In this work, we introduce the Riemannian Diffusion Mixture, a principled framework for building a generative diffusion process on manifolds. Instead of following the denoising approach of previous diffusion models, we construct a diffusion process using a mixture of bridge processes derived on general manifolds without requiring heat kernel estimations. We develop a geometric understanding of the mixture process, deriving the drift as a weighted mean of tangent directions to the data points that guides the process toward the data distribution. We further propose a scalable training objective for learning the mixture process that readily applies to general manifolds. Our method achieves superior performance on diverse manifolds with dramatically reduced number of in-training simulation steps for general manifolds.

In this paper we demonstrate how sub-Riemannian geometry can be used for manifold learning and surface reconstruction by combining local linear approximations of a point cloud to obtain lower dimensional bundles. Local approximations obtained by local PCAs are collected into a rank k tangent subbundle on R^d, k<d, which we call a principal subbundle. This determines a sub-Riemannian metric on R^d. We show that sub-Riemannian geodesics with respect to this metric can successfully be applied to a number of important problems, such as: explicit construction of an approximating submanifold M, construction of a representation of the point-cloud in R^k, and computation of distances between observations, taking the learned geometry into account. The reconstruction is guaranteed to equal the true submanifold in the limit case where tangent spaces are estimated exactly. Via simulations, we show that the framework is robust when applied to noisy data. Furthermore, the framework generalizes to observations on an a priori known Riemannian manifold.

Adversarial training is effective on balanced datasets, but its robustness degrades under longtailed class distributions, where tail classes suffer high robust error and unstable decision boundaries. We propose Manifold-Constrained Adversarial Training (MCAT), a unified framework that enforces the semantic validity of adversarial examples by penalizing deviations from class-conditional manifolds in feature space, while promoting balanced geometric separation across classes via an ETF-inspired regularization. We provide theoretical results that link geometric separation to lower bounds on adversarially robust margins, and show that manifold-constrained adversarial risk upperbounds robust risk on high-density semantic regions. Extensive experiments on standard longtailed benchmarks demonstrate consistent improvements in overall, balanced, and tail-class adversarial robustness.