Daily Papers

Engram conditional memory has emerged as a promising component for LLMs by decoupling static knowledge lookup from dynamic computation. Since Engram exhibits sparse access patterns and supports prefetching, its massive embedding tables are well-suited for offloading to lower-tier memory. In this paper, we propose using Compute Express Link (CXL) memory pool for Engram storage. Compared to RDMA, CXL provides fine-grained and low-latency access required by minimal and discrete retrieval patterns of Engram. We integrate the CXL-based Engram pool into SGLang, achieving near-DRAM end-to-end performance. This provides a scalable and cost-efficient storage solution for future Engram-integrated LLMs without compromising inference performance.

The growing prevalence of Large Language Models (LLMs) and their substantial memory requirements have prompted renewed interest in CPU offloading as a method to compensate for limited GPU memory. In particular, when CPU memory is leveraged to temporarily store intermediate states of LLMs, CPU memory becomes a new bottleneck and soon reaches the capacity limitation of commodity CPUs. In this work, we investigate the effectiveness of Compute Express Link (CXL) add-in card (AIC) memory as an extension to CPU memory, enabling larger model sizes and longer context lengths during fine-tuning. Through extensive benchmarking, this study quantifies the performance overhead introduced by transferring data between CXL memory, CPU, and GPUs, focusing on how concurrency and data volume influence bandwidth utilization and latency. This study also compares CPUbased optimizer steps when model parameters, gradients, and optimizer states reside in local memory versus CXL memory, revealing that naive adoption of CXL often degrades performance during the optimizer phase. To overcome these challenges, this study proposes a CXL-aware allocation to strategically partition CPU offloading workloads across both local and CXL memory. This study further demonstrates that employing multiple AICs significantly reduces bandwidth contention, thus improving scalability. Experimental results show that these optimizations enable efficient long-context LLM fine-tuning, underscoring CXL as a promising avenue for unlocking the full potential of CPU offloading in long-context LLM fine-tuning.

Traffic matrices (TMs) capture network-wide origin-destination demand and are central to traffic engineering, yet accurate whole-matrix forecasting remains challenging when prediction must be performed under the memory, update, and training-budget constraints of online network control. This paper investigates whether compact quantum-inspired recurrent models can provide effective TM forecasts without relying on dedicated graph, transformer, or diffusion modules. We adapt gated quantum-inspired Kolmogorov-Arnold network fast-weight programmers (QKAN-FWPs) to direct multi-step Abilene TM forecasting, where each model predicts the next 20 five-minute frames of a 144-channel origin-destination (OD) matrix from a two-hour history. We benchmark three QKAN placement variants against a matched-size long short-term memory (LSTM) network, a larger LSTM, and a classical gated fast-weight programmer under a shared fixed-budget training protocol. Among the evaluated recurrent models, G-QKANFWP achieves the best pooled root-mean-square error (RMSE), while using only 22.4% of the larger LSTM. It also outperforms both the matched-size LSTM and the classical G-FWP baseline, indicating that the gain is not due to gated fast-weight framework alone. Convergence and channel-wise analyses further show that the quantum-inspired variants obtain lower validation-loss area under the learning curve (AULC) than matched-size recurrent baselines, while G-QKANFWP and GQKAN-FWP achieve substantially more OD-channel wins. These results identify a classical slow programmer with a quantum-inspired fast programmer as a promising accuracy-efficiency design for resource-conscious network traffic-matrix forecasting.

Computing the polar decomposition and the related matrix sign function has been a well-studied problem in numerical analysis for decades. Recently, it has emerged as an important subroutine within the Muon algorithm for training deep neural networks. However, the requirements of this application differ sharply from classical settings: deep learning demands GPU-friendly algorithms that prioritize high throughput over high precision. We introduce Polar Express, a new method for computing the polar decomposition. Like Newton-Schulz and other classical polynomial methods, our approach uses only matrix-matrix multiplications, making it very efficient on GPUs. Inspired by earlier work of Chen & Chow and Nakatsukasa & Freund, Polar Express adapts the update rule at each iteration by solving a minimax optimization problem. We prove that this strategy minimizes error in a worst-case sense, allowing Polar Express to converge as rapidly as possible both in the early iterations and asymptotically. We also address finite-precision issues, making it practical to use in bfloat16. When integrated into the Muon training framework, our method leads to consistent improvements in validation loss when training a GPT-2 model on one billion tokens from the FineWeb dataset, outperforming recent alternatives across a range of learning rates.

Yuan 2.0-M32, with a similar base architecture as Yuan-2.0 2B, uses a mixture-of-experts architecture with 32 experts of which 2 experts are active. A new router network, Attention Router, is proposed and adopted for a more efficient selection of experts, which boosts the accuracy of 3.8% compared to the model with classical router network. Yuan 2.0-M32 is trained with 2000B tokens from scratch, and the training computation consumption is only 9.25% of a dense model at the same parameter scale. Yuan 2.0-M32 demonstrates competitive capability on coding, math, and various domains of expertise, with only 3.7B active parameters of 40B in total, and 7.4 GFlops forward computation per token, both of which are only 1/19 of Llama3-70B. Yuan 2.0-M32 surpass Llama3-70B on MATH and ARC-Challenge benchmark, with accuracy of 55.89 and 95.8 respectively. The models and source codes of Yuan 2.0-M32 are released at Github.

The Dragonfly network, with its high-radix and low-diameter structure, is a leading interconnect in high-performance computing. A major challenge is workload interference on shared network links. Parallel discrete event simulation (PDES) is commonly used to analyze workload interference. However, high-fidelity PDES is computationally expensive, making it impractical for large-scale or real-time scenarios. Hybrid simulation that incorporates data-driven surrogate models offers a promising alternative, especially for forecasting application runtime, a task complicated by the dynamic behavior of network traffic. We present \ourmodel, a surrogate model that combines graph neural networks (GNNs) and large language models (LLMs) to capture both spatial and temporal patterns from port level router data. \ourmodel outperforms existing statistical and machine learning baselines, enabling accurate runtime prediction and supporting efficient hybrid simulation of Dragonfly networks.

Emerging Large Language Model (LLM) system patterns, such as disaggregated inference, Mixture-of-Experts (MoE) routing, and asynchronous reinforcement fine-tuning, require flexible point-to-point communication beyond simple collectives. Existing implementations are locked to specific Network Interface Controllers (NICs), hindering integration into inference engines and portability across hardware providers. We present TransferEngine, which bridges the functionality of common NICs to expose a uniform interface. TransferEngine exposes one-sided WriteImm operations with a ImmCounter primitive for completion notification, without ordering assumptions of network transport, transparently managing multiple NICs per GPU. We demonstrate peak throughput of 400 Gbps on both NVIDIA ConnectX-7 and AWS Elastic Fabric Adapter (EFA). We showcase TransferEngine through three production systems: (1) KvCache transfer for disaggregated inference with dynamic scaling, (2) RL weight updates achieving 1.3 seconds for trillion-parameter models, and (3) MoE dispatch/combine implementation exceeding DeepEP decode latency on ConnectX-7, with the first viable latencies on EFA. We demonstrate that our portable point-to-point communication complements collectives while avoiding lock-in.

Multi-model routing has evolved from an engineering technique into essential infrastructure, yet existing work lacks a systematic, reproducible benchmark for evaluating vision-language models (VLMs). We present VL-RouterBench to assess the overall capability of VLM routing systems systematically. The benchmark is grounded in raw inference and scoring logs from VLMs and constructs quality and cost matrices over sample-model pairs. In scale, VL-RouterBench covers 14 datasets across 3 task groups, totaling 30,540 samples, and includes 15 open-source models and 2 API models, yielding 519,180 sample-model pairs and a total input-output token volume of 34,494,977. The evaluation protocol jointly measures average accuracy, average cost, and throughput, and builds a ranking score from the harmonic mean of normalized cost and accuracy to enable comparison across router configurations and cost budgets. On this benchmark, we evaluate 10 routing methods and baselines and observe a significant routability gain, while the best current routers still show a clear gap to the ideal Oracle, indicating considerable room for improvement in router architecture through finer visual cues and modeling of textual structure. We will open-source the complete data construction and evaluation toolchain to promote comparability, reproducibility, and practical deployment in multimodal routing research.

Personalized PageRank (PPR) has enormous applications, such as link prediction and recommendation systems for social networks, which often require the fully PPR to be known. Besides, most of real-life graphs are edge-weighted, e.g., the interaction between users on the Facebook network. However, it is computationally difficult to compute the fully PPR, especially on large graphs, not to mention that most existing approaches do not consider the weights of edges. In particular, the existing approach cannot handle graphs with billion edges on a moderate-size cluster. To address this problem, this paper presents a novel study on the computation of fully edge-weighted PPR on large graphs using the distributed computing framework. Specifically, we employ the Monte Carlo approximation that performs a large number of random walks from each node of the graph, and exploits the parallel pipeline framework to reduce the overall running time of the fully PPR. Based on that, we develop several optimization techniques which (i) alleviate the issue of large nodes that could explode the memory space, (ii) pre-compute short walks for small nodes that largely speedup the computation of random walks, and (iii) optimize the amount of random walks to compute in each pipeline that significantly reduces the overhead. With extensive experiments on a variety of real-life graph datasets, we demonstrate that our solution is several orders of magnitude faster than the state-of-the-arts, and meanwhile, largely outperforms the baseline algorithms in terms of accuracy.

The rapid evolution of large language models (LLMs), driven by growing parameter scales, adoption of mixture-of-experts (MoE) architectures, and expanding context lengths, imposes unprecedented demands on AI infrastructure. Traditional AI clusters face limitations in compute intensity, memory bandwidth, inter-chip communication, and latency, compounded by variable workloads and strict service-level objectives. Addressing these issues requires fundamentally redesigned hardware-software integration. This paper introduces Huawei CloudMatrix, a next-generation AI datacenter architecture, realized in the production-grade CloudMatrix384 supernode. It integrates 384 Ascend 910C NPUs and 192 Kunpeng CPUs interconnected via an ultra-high-bandwidth Unified Bus (UB) network, enabling direct all-to-all communication and dynamic pooling of resources. These features optimize performance for communication-intensive operations, such as large-scale MoE expert parallelism and distributed key-value cache access. To fully leverage CloudMatrix384, we propose CloudMatrix-Infer, an advanced LLM serving solution incorporating three core innovations: a peer-to-peer serving architecture that independently scales prefill, decode, and caching; a large-scale expert parallelism strategy supporting EP320 via efficient UB-based token dispatch; and hardware-aware optimizations including specialized operators, microbatch-based pipelining, and INT8 quantization. Evaluation with the DeepSeek-R1 model shows CloudMatrix-Infer achieves state-of-the-art efficiency: prefill throughput of 6,688 tokens/s per NPU and decode throughput of 1,943 tokens/s per NPU (<50 ms TPOT). It effectively balances throughput and latency, sustaining 538 tokens/s even under stringent 15 ms latency constraints, while INT8 quantization maintains model accuracy across benchmarks.

Quantum communication can enhance internet technology by enabling novel applications that are provably impossible classically. The successful execution of such applications relies on the generation of quantum entanglement between different users of the network which meets stringent performance requirements. Alongside traditional metrics such as throughput and jitter, one must ensure the generated entanglement is of sufficiently high quality. Meeting such performance requirements demands a careful orchestration of many devices in the network, giving rise to a fundamentally new scheduling problem. Furthermore, technological limitations of near-term quantum devices impose significant constraints on scheduling methods hoping to meet performance requirements. In this work, we propose the first end-to-end design of a centralized quantum network with multiple users that orchestrates the delivery of entanglement which meets quality-of-service (QoS) requirements of applications. We achieve this by using a centrally constructed schedule that manages usage of devices and ensures the coordinated execution of different quantum operations throughout the network. We use periodic task scheduling and resource-constrained project scheduling techniques, including a novel heuristic, to construct the schedules. Our simulations of four small networks using hardware-validated network parameters, and of a real-world fiber topology using futuristic parameters, illustrate trade-offs between traditional and quantum performance metrics.

We introduce TravelFraudBench (TFG), a configurable benchmark for evaluating graph neural networks (GNNs) on fraud ring detection in travel platform graphs. Existing benchmarks--YelpChi, Amazon-Fraud, Elliptic, PaySim--cover single node types or domain-generic patterns with no mechanism to evaluate across structurally distinct fraud ring topologies. TFG simulates three travel-specific ring types--ticketing fraud (star topology with shared device/IP clusters), ghost hotel schemes (reviewer x hotel bipartite cliques), and account takeover rings (loyalty transfer chains)--in a heterogeneous graph with 9 node types and 12 edge types. Ring size, count, fraud rate, scale (500 to 200,000 nodes), and composition are fully configurable. We evaluate six methods--MLP, GraphSAGE, RGCN-proj, HAN, RGCN, and PC-GNN--under a ring-based split where each ring appears entirely in one partition, eliminating transductive label leakage. GraphSAGE achieves AUC=0.992 and RGCN-proj AUC=0.987, outperforming the MLP baseline (AUC=0.938) by 5.5 and 5.0 pp, confirming graph structure adds substantial discriminative power. HAN (AUC=0.935) is a negative result, matching the MLP baseline. On the ring recovery task (>=80% of ring members flagged simultaneously), GraphSAGE achieves 100% recovery across all ring types; MLP recovers only 17-88%. The edge-type ablation shows device and IP co-occurrence are the primary signals: removing uses_device drops AUC by 5.2 pp. TFG is released as an open-source Python package (MIT license) with PyG, DGL, and NetworkX exporters and pre-generated datasets at https://huggingface.co/datasets/bsajja7/travel-fraud-graphs, with Croissant metadata including Responsible AI fields.

Text-to-SQL automatically translates natural language queries to SQL, allowing non-technical users to retrieve data from databases without specialized SQL knowledge. Despite the success of advanced LLM-based Text-to-SQL approaches on leaderboards, their unsustainable computational costs--often overlooked--stand as the "elephant in the room" in current leaderboard-driven research, limiting their economic practicability for real-world deployment and widespread adoption. To tackle this, we exploratively propose EllieSQL, a complexity-aware routing framework that assigns queries to suitable SQL generation pipelines based on estimated complexity. We investigate multiple routers to direct simple queries to efficient approaches while reserving computationally intensive methods for complex cases. Drawing from economics, we introduce the Token Elasticity of Performance (TEP) metric, capturing cost-efficiency by quantifying the responsiveness of performance gains relative to token investment in SQL generation. Experiments show that compared to always using the most advanced methods in our study, EllieSQL with the Qwen2.5-0.5B-DPO router reduces token use by over 40% without compromising performance on Bird development set, achieving more than a 2x boost in TEP over non-routing approaches. This not only advances the pursuit of cost-efficient Text-to-SQL but also invites the community to weigh resource efficiency alongside performance, contributing to progress in sustainable Text-to-SQL.

Large language models (LLMs) have achieved success, but cost and privacy constraints necessitate deploying smaller models locally while offloading complex queries to cloud-based models. Existing router evaluations are unsystematic, overlooking scenario-specific requirements and out-of-distribution robustness. We propose RouterXBench, a principled evaluation framework with three dimensions: router ability, scenario alignment, and cross-domain robustness. Unlike prior work that relies on output probabilities or external embeddings, we utilize internal hidden states that capture model uncertainty before answer generation. We introduce ProbeDirichlet, a lightweight router that aggregates cross-layer hidden states via learnable Dirichlet distributions with probabilistic training. Trained on multi-domain data, it generalizes robustly across in-domain and out-of-distribution scenarios. Our results show ProbeDirichlet achieves 16.68% and 18.86% relative improvements over the best baselines in router ability and high-accuracy scenarios, with consistent performance across model families, model scales, heterogeneous tasks, and agentic workflows.

The Lottery Ticket Hypothesis asserts the existence of highly sparse, trainable subnetworks ('winning tickets') within dense, randomly initialized neural networks. However, state-of-the-art methods of drawing these tickets, like Lottery Ticket Rewinding (LTR), are computationally prohibitive, while more efficient saliency-based Pruning-at-Initialization (PaI) techniques suffer from a significant accuracy-sparsity trade-off and fail basic sanity checks. In this work, we argue that PaI's reliance on first-order saliency metrics, which ignore inter-weight dependencies, contributes substantially to this performance gap, especially in the sparse regime. To address this, we introduce Concrete Ticket Search (CTS), an algorithm that frames subnetwork discovery as a holistic combinatorial optimization problem. By leveraging a Concrete relaxation of the discrete search space and a novel gradient balancing scheme (GRADBALANCE) to control sparsity, CTS efficiently identifies high-performing subnetworks near initialization without requiring sensitive hyperparameter tuning. Motivated by recent works on lottery ticket training dynamics, we further propose a knowledge distillation-inspired family of pruning objectives, finding that minimizing the reverse Kullback-Leibler divergence between sparse and dense network outputs (CTS-KL) is particularly effective. Experiments on varying image classification tasks show that CTS produces subnetworks that robustly pass sanity checks and achieve accuracy comparable to or exceeding LTR, while requiring only a small fraction of the computation. For example, on ResNet-20 on CIFAR10, it reaches 99.3% sparsity with 74.0% accuracy in 7.9 minutes, while LTR attains the same sparsity with 68.3% accuracy in 95.2 minutes. CTS's subnetworks outperform saliency-based methods across all sparsities, but its advantage over LTR is most pronounced in the highly sparse regime.

Heterogeneous LLM serving stacks split scheduling into two layers that optimize in isolation: model routers pick a model from quality and cost signals while ignoring instance load, and serving load balancers optimize queues while ignoring quality. We present RouteBalance, a serving-aware scheduling layer that fuses both into a single online assignment over concrete model instances, jointly trading off quality, latency, and cost. A batched in-process predictor stack and dead-reckoned instance state keep the joint decision cheap on the request hot path (approx32 ms at 12 req/s). On a 13-instance, 28-GPU heterogeneous cluster serving four model sizes, a single deployed RouteBalance stack traces the upper region of the three-way quality-cost-throughput frontier. Sweeping one weight vector reaches both the highest routing-decision quality (DeepEval 0.419, +0.013 over the strongest baseline, 95% CI [{+}0.005,{+}0.022]; the ordering holds when a second judge re-scores the actually served text) and, at its cost-priority corner, per-request cost that ties the cheapest baseline. With router engineering equalized against concurrent-scoring baseline variants we build, its balanced preset serves at 2.8 s and 30 req/s, leading 2.6 to 4.1times ahead of enhanced BEST-Route at high load. (Deploying those routers as published, one serial scoring call per request, makes them collapse 23times under load, a deployment-architecture effect we isolate separately, not the routing result.) A four-arm isolation shows the benefit follows from pricing latency at model-selection time; the learned predictors contribute calibration and SLO headroom rather than the headline frontier. Code: https://github.com/AKafakA/route-balance

Computing distances and finding shortest paths in massive real-world networks is a fundamental algorithmic task in network analysis. There are two main approaches to solving this task. On one hand are traversal-based algorithms like bidirectional breadth-first search (BiBFS) with no preprocessing step and slow individual distance inquiries. On the other hand are indexing-based approaches, which maintain a large index. This allows for answering individual inquiries very fast; however, index creation is prohibitively expensive. We seek to bridge these two extremes: quickly answer distance inquiries without the need for costly preprocessing. In this work, we propose a new algorithm and data structure, WormHole, for approximate shortest path computations. WormHole leverages structural properties of social networks to build a sublinearly sized index, drawing upon the explicit core-periphery decomposition of Ben-Eliezer et al. Empirically, the preprocessing time of WormHole improves upon index-based solutions by orders of magnitude, and individual inquiries are consistently much faster than in BiBFS. The acceleration comes at the cost of a minor accuracy trade-off. Nonetheless, our empirical evidence demonstrates that WormHole accurately answers essentially all inquiries within a maximum additive error of 2. We complement these empirical results with provable theoretical guarantees, showing that WormHole requires n^{o(1)} node queries per distance inquiry in random power-law networks. In contrast, any approach without a preprocessing step requires n^{Ω(1)} queries for the same task. WormHole does not require reading the whole graph. Unlike the vast majority of index-based algorithms, it returns paths, not just distances. For faster inquiry times, it can be combined effectively with other index-based solutions, by running them only on the sublinear core.

Sparse Mixture of Experts (MoE) models, while outperforming dense Large Language Models (LLMs) in terms of performance, face significant deployment challenges during inference due to their high memory demands. Existing offloading techniques, which involve swapping activated and idle experts between the GPU and CPU, often suffer from rigid expert caching mechanisms. These mechanisms fail to adapt to dynamic routing, leading to inefficient cache utilization, or incur prohibitive costs for prediction training. To tackle these inference-specific challenges, we introduce ExpertFlow, a comprehensive system specifically designed to enhance inference efficiency by accommodating flexible routing and enabling efficient expert scheduling between CPU and GPU. This reduces overhead and boosts system performance. Central to our approach is a predictive routing path-based offloading mechanism that utilizes a lightweight predictor to accurately forecast routing paths before computation begins. This proactive strategy allows for real-time error correction in expert caching, significantly increasing cache hit ratios and reducing the frequency of expert transfers, thereby minimizing I/O overhead. Additionally, we implement a dynamic token scheduling strategy that optimizes MoE inference by rearranging input tokens across different batches. This method not only reduces the number of activated experts per batch but also improves computational efficiency. Our extensive experiments demonstrate that ExpertFlow achieves up to 93.72\% GPU memory savings and enhances inference speed by 2 to 10 times compared to baseline methods, highlighting its effectiveness and utility as a robust solution for resource-constrained inference scenarios.

We present a reproducible, parameter-driven software workflow for optimizing approximate mutually unbiased basis (AMUB) configurations in arbitrary dimensions d using a Lie-algebra unitary parameterization. The workflow is designed for portable execution across CPU, Apple MPS, CUDA-capable GPU, and HPC backends, using a Taylor-series matrix exponential layer as an accelerator compatibility pathway. As a dimension-six case study, we optimize unanchored configurations across 100 random seeds for basis counts n = 3, 4, 5, 6 in complex128 and complex64 arithmetic. The workflow recovers exact three-basis configurations, identifies a recurrent four-basis partial-exact hub-and-triangle structure, and finds no near-exact pairs for n = 5 or n = 6 in the reported campaigns under the primary tolerance. As a hardware-execution check, we embed the representative d = 6, n = 4 transition unitaries into three-qubit 8x8 unitaries and execute the resulting circuits on the 156-qubit Heron processor ibm-marrakesh using subspace post-selection. The measured QPU pairwise losses are dominated by a hardware and compilation noise floor of approximately 0.02-0.08, associated with compiled circuits averaging 37 native CZ gates, which obscures the distinction between classically near-exact and defective pairs. The results provide a reproducible computational framework for exploring AMUB landscapes, together with an initial assessment of the challenges involved in executing optimized dimension-six unitaries on current quantum hardware.

Standard Retrieval-Augmented Generation (RAG) pipelines route every query through retrieval and generation unconditionally, incurring unnecessary computation and propagating low-quality context to the generator. We introduce EverydayGPT, a lightweight conversational QA system built around a Confidence-Gated Routing (CGR) mechanism that formalises the routing decision as a joint policy over retrieval distance and extraction adequacy. The backbone is a 205M-parameter GPT trained from scratch on 10B tokens of FineWeb-Edu. CGR avoids invoking the costly GPT pathway (~5.9s) for 85 percent of queries by resolving them via fast RAG extraction (~45 ms), yielding over 120x latency reduction on the majority of queries while maintaining answer quality. On a 500-question in-domain benchmark, the system achieves F1 = 0.226 +/- 0.004 compared to 0.171 for GPT-only and 0.210 for unconditional RAG. Gains over strong baselines are modest but consistent, while efficiency improvements are substantial (6.3x mean latency reduction). A structured grounding audit finds no unsupported claims in the sampled set, with explicit scope limitations. We position this work as a study of routing strategies under resource constraints rather than a claim of state-of-the-art performance.

As large language models (LLMs) diversify across modalities, capabilities, and cost profiles, the problem of intelligent request routing -- selecting the right model for each query at inference time -- has become a critical systems challenge. We present vLLM Semantic Router, a signal-driven decision routing framework for Mixture-of-Modality (MoM) model deployments. The central innovation is composable signal orchestration: the system extracts heterogeneous signal types from each request -- from sub-millisecond heuristic features (keyword patterns, language detection, context length, role-based authorization) to neural classifiers (domain, embedding similarity, factual grounding, modality) -- and composes them through configurable Boolean decision rules into deployment-specific routing policies. Different deployment scenarios -- multi-cloud enterprise, privacy-regulated, cost-optimized, latency-sensitive -- are expressed as different signal-decision configurations over the same architecture, without code changes. Matched decisions drive semantic model routing: over a dozen of selection algorithms analyze request characteristics to find the best model cost-effectively, while per-decision plugin chains enforce privacy and safety constraints (jailbreak detection, PII filtering, hallucination detection via the three-stage HaluGate pipeline). The system provides OpenAI API support for stateful multi-turn conversations, multi-endpoint and multi-provider routing across heterogeneous backends (vLLM, OpenAI, Anthropic, Azure, Bedrock, Gemini, Vertex AI), and a pluggable authorization factory supporting multiple auth providers. Deployed in production as an Envoy external processor, the architecture demonstrates that composable signal orchestration enables a single routing framework to serve diverse deployment scenarios with differentiated cost, privacy, and safety policies.

Large language model (LLM) routing assigns each query to the most suitable model from an ensemble. We introduce LLMRouterBench, a large-scale benchmark and unified framework for LLM routing. It comprises over 400K instances from 21 datasets and 33 models. Moreover, it provides comprehensive metrics for both performance-oriented routing and performance-cost trade-off routing, and integrates 10 representative routing baselines. Using LLMRouterBench, we systematically re-evaluate the field. While confirming strong model complementarity-the central premise of LLM routing-we find that many routing methods exhibit similar performance under unified evaluation, and several recent approaches, including commercial routers, fail to reliably outperform a simple baseline. Meanwhile, a substantial gap remains to the Oracle, driven primarily by persistent model-recall failures. We further show that backbone embedding models have limited impact, that larger ensembles exhibit diminishing returns compared to careful model curation, and that the benchmark also enables latency-aware analysis. All code and data are available at https://github.com/ynulihao/LLMRouterBench.

Router is the cornerstone component to the Mixture-of-Experts models. Serving as expert proxies, the rows of the router matrix compute their similarity to the MoE inputs to determine which subset of experts is activated. Ideally, each router row is designed to encode the expert matrix into this representative vector, such that its dot-product with token can better reflect token-expert affinity. However, there exists no design principles to enforce this condensation. In this paper, we propose to align each router row with the principal singular direction of the associated expert, as this direction provides the most expressive mathematical description of a matrix. Based on this principle, we propose a router redesign with Manifold Power Iteration (MPI). Specifically, it introduces a "Power-then-Retract" paradigm, where a power iteration step is performed on the router weights, followed by a retraction to impose a norm constraint to ensure both efficiency and stability. Theoretically, we show that MPI drives router rows to converge toward the principal singular directions of associated experts. Empirically, we pretrain MoE model across scales from 1B to 11B parameters to confirm that this alignment facilitates more effective MoE models.

Recent advances in quantum information science enabled the development of quantum communication network prototypes and created an opportunity to study full-stack quantum network architectures. This work develops SeQUeNCe, a comprehensive, customizable quantum network simulator. Our simulator consists of five modules: Hardware models, Entanglement Management protocols, Resource Management, Network Management, and Application. This framework is suitable for simulation of quantum network prototypes that capture the breadth of current and future hardware technologies and protocols. We implement a comprehensive suite of network protocols and demonstrate the use of SeQUeNCe by simulating a photonic quantum network with nine routers equipped with quantum memories. The simulation capabilities are illustrated in three use cases. We show the dependence of quantum network throughput on several key hardware parameters and study the impact of classical control message latency. We also investigate quantum memory usage efficiency in routers and demonstrate that redistributing memory according to anticipated load increases network capacity by 69.1% and throughput by 6.8%. We design SeQUeNCe to enable comparisons of alternative quantum network technologies, experiment planning, and validation and to aid with new protocol design. We are releasing SeQUeNCe as an open source tool and aim to generate community interest in extending it.

Time series reasoning is essential for real-world problem-solving. While both Large Language Models (LLMs) and Vision-Language Models (VLMs) can reason about time-series data, their capabilities are complementary: LLMs process time series as text sequences and thus preserve exact numerical understanding, but struggle with global patterns, whereas VLMs efficiently capture these patterns by visualizing time series but may lose fine-grained details. Moreover, models vary significantly in task-specific expertise and inference costs. Dynamically selecting the most suitable modality and model for each query is therefore crucial, yet challenging because it requires modeling the complex interactions among tasks, queries, modalities, and models, which carry rich contextual signals. To this end, we introduce TSRouter, a graph-based dynamic routing framework. TSRouter constructs a heterogeneous graph of task, query, modality, and model nodes to contextualize the interactions among query characteristics, modality attributes, and model capabilities. TSRouter formulates routing as a candidate scoring problem, where each modality-model pair is evaluated based on user-defined performance-cost preferences to select the optimal candidate. Comprehensive evaluations on 4 distinct time series reasoning tasks reveal that TSRouter substantially outperforms diverse baselines with 16\% to 46\% relative improvements. Furthermore, TSRouter demonstrates robust zero-shot plug-and-play generalization to unseen models and novel tasks and preserves high performance while reducing computational overhead through cost-aware optimization. Our code is available at https://github.com/tianyi-lab/TSRouter.

We present an end-to-end reconfigurable algorithmic pipeline for solving a famous problem in knot theory using a noisy digital quantum computer, namely computing the value of the Jones polynomial at the fifth root of unity within additive error for any input link, i.e. a closed braid. This problem is DQC1-complete for Markov-closed braids and BQP-complete for Plat-closed braids, and we accommodate both versions of the problem. Even though it is widely believed that DQC1 is strictly contained in BQP, and so is 'less quantum', the resource requirements of classical algorithms for the DQC1 version are at least as high as for the BQP version, and so we potentially gain 'more advantage' by focusing on Markov-closed braids in our exposition. We demonstrate our quantum algorithm on Quantinuum's H2-2 quantum computer and show the effect of problem-tailored error-mitigation techniques. Further, leveraging that the Jones polynomial is a link invariant, we construct an efficiently verifiable benchmark to characterise the effect of noise present in a given quantum processor. In parallel, we implement and benchmark the state-of-the-art tensor-network-based classical algorithms for computing the Jones polynomial. The practical tools provided in this work allow for precise resource estimation to identify near-term quantum advantage for a meaningful quantum-native problem in knot theory.

Language models are not accurate in numerical problems. Their architecture does not allow for anything less than a probabilistic next word. This paper introduces ComputeGPT: an approach of creating a chat model able to answer computational problems through running on-demand code. ComputeGPT converts each question to relevant code, runs the code, and returns the computed answer as part of the chat. We combine this approach with a local browser-based Python interpretation and fine-tuned prompts in order to achieve state-of-the-art efficiency on numerical problems and provide a suitable front-end and safe environment for the code to be executed in.

Modern Large Language Models achieve impressive reasoning capabilities with long Chain of Thoughts, but they incur substantial computational cost during inference, and this motivates techniques to improve the performance-cost ratio. Among these techniques, Speculative Decoding accelerates inference by employing a fast but inaccurate draft model to autoregressively propose tokens, which are then verified in parallel by a more capable target model. However, due to unnecessary rejections caused by token mismatches in semantically equivalent steps, traditional token-level Speculative Decoding struggles in reasoning tasks. Although recent works have shifted to step-level semantic verification, which improve efficiency by accepting or rejecting entire reasoning steps, existing step-level methods still regenerate many rejected steps with little improvement, wasting valuable target compute. To address this challenge, we propose Arbitrage, a novel step-level speculative generation framework that routes generation dynamically based on the relative advantage between draft and target models. Instead of applying a fixed acceptance threshold, Arbitrage uses a lightweight router trained to predict when the target model is likely to produce a meaningfully better step. This routing approximates an ideal Arbitrage Oracle that always chooses the higher-quality step, achieving near-optimal efficiency-accuracy trade-offs. Across multiple mathematical reasoning benchmarks, Arbitrage consistently surpasses prior step-level Speculative Decoding baselines, reducing inference latency by up to sim2times at matched accuracy.

Large language model (LLM) routers improve the efficiency of multi-model systems by directing each query to the most appropriate model while leveraging the diverse strengths of heterogeneous LLMs. Most existing approaches frame routing as a classification problem based solely on the input query. While this reduces overhead by avoiding inference across all models, it overlooks valuable information that could be gleaned from potential outputs and fails to capture implicit intent or contextual nuances that often emerge only during response generation. These limitations can result in suboptimal routing decisions, particularly for complex or ambiguous queries that require deeper semantic understanding. To address this challenge, we propose Lookahead, a routing framework that "foresees" potential model outputs by predicting their latent representations and uses these predictions to guide model selection, thus enabling more informed routing without full inference. Within this framework, we implement two approaches based on causal and masked language models. Empirical evaluations across seven public benchmarks - spanning instruction following, mathematical reasoning, and code generation - show that Lookahead consistently outperforms existing routing baselines, achieving an average performance gain of 7.7% over the state-of-the-art. Our code is available at https://github.com/huangcb01/lookahead-routing.

ModeSwitch-LLM is a lightweight request-boundary controller for improving single-GPU large language model inference efficiency by routing each request to an appropriate fixed inference mode. Instead of relying on one static serving configuration, the system selects among FP16, quantized modes, speculative decoding, and hybrid modes such as GPTQ plus prefix caching and INT8 plus continuous batching using cheap workload-level features. We evaluate ModeSwitch-LLM on Meta-Llama-3.1-8B-Instruct served on a single NVIDIA A100 GPU. On deployment-style synthetic workloads, the online controller achieves a 2.10x mean latency speedup over FP16 and a 0.48x mean energy ratio, corresponding to 51.7% lower energy per token. On automatic benchmarks used as a quality gate, accuracy remains close to FP16 with a mean delta of +0.17 percentage points. We also evaluate lightweight learned routers, but find that they do not clearly outperform the rule-based controller because they add routing overhead and more often select modes that violate quality, energy, or memory constraints. These results show that simple request-aware routing can recover substantial efficiency from existing inference modes without retraining the model or changing its architecture.

Large language models (LLMs) have demonstrated exceptional performance across a wide range of natural language tasks. However, selecting the optimal LLM to respond to a user query often necessitates a delicate balance between performance and cost. While powerful models deliver better results, they come at a high cost, whereas smaller models are more cost-effective but less capable. To address this trade-off, we propose IRT-Router, a multi-LLM routing framework that efficiently routes user queries to the most suitable LLM. Inspired by Item Response Theory (IRT), a psychological measurement methodology, IRT-Router explicitly models the relationship between LLM capabilities and user query attributes. This not only enables accurate prediction of response performance but also provides interpretable insights, such as LLM abilities and query difficulty. Additionally, we design an online query warm-up technique based on semantic similarity, further enhancing the online generalization capability of IRT-Router. Extensive experiments on 20 LLMs and 12 datasets demonstrate that IRT-Router outperforms most baseline methods in terms of effectiveness and interpretability. Its superior performance in cold-start scenarios further confirms the reliability and practicality of IRT-Router in real-world applications. Code is available at https://github.com/Mercidaiha/IRT-Router.

No single large language model (LLM) is optimal across all queries and budget constraints, making model routing essential for cost-effective deployment. Existing routers adopt diverse formulations and implementations, making fair comparison and extension difficult. We present a unified formulation of LLM routing as a sequential decision process characterized by five components: context encoders, model encoders, scoring functions, decision rules, and learning signals, covering single-turn, multi-turn, and personalized routing. Based on this formulation, we develop an automated pipeline for constructing routing supervision and evaluating routers jointly on response quality and inference cost. The resulting benchmark, xRouteBench, spans generic LLM, memory-augmented, vision, time-series, and personalized routing tasks. We further introduce LLMRouter, an open-source modular infrastructure with more than 16 representative routers. Our empirical study shows that learned routers outperform the strongest fixed-model baseline by 14.6% relatively, lightweight routers become more competitive under tight cost constraints, and user-conditioned routing consistently improves personalization.

Mixture-of-Experts layers achieve compute efficiency through weight sparsity: each token activates only a subset of experts. Data sparsity, where each expert processes only a subset of tokens, offers a complementary axis. Expert-choice routing implements data sparsity directly but violates causality in autoregressive models, creating train-inference mismatch. We recover data sparsity within causal token-choice MoE by leveraging zero-compute (null) experts within the routing pool. When a token routes to null experts, those slots consume no compute. The standard load balancing objective trains the model to uniformly use all experts (real and null) therefore creating data sparsity in expectation without the causality violations. We evaluate on vision-language model training, where data heterogeneity is pronounced: vision encoders produce many low-information tokens while text tokens are denser. At matched expected FLOPs, composing weight and data sparsity yields a more compute-efficient frontier than weight sparsity alone, with gains in training loss and downstream performance. The model learns implicit modality-aware allocation, routing vision tokens to null experts more aggressively than text, without explicit modality routing.

Mixture-of-Experts (MoE) models lack explicit constraints to ensure the router's decisions align well with the experts' capabilities, which ultimately limits model performance. To address this, we propose expert-router coupling (ERC) loss, a lightweight auxiliary loss that tightly couples the router's decisions with expert capabilities. Our approach treats each expert's router embedding as a proxy token for the tokens assigned to that expert, and feeds perturbed router embeddings through the experts to obtain internal activations. The ERC loss enforces two constraints on these activations: (1) Each expert must exhibit higher activation for its own proxy token than for the proxy tokens of any other expert. (2) Each proxy token must elicit stronger activation from its corresponding expert than from any other expert. These constraints jointly ensure that each router embedding faithfully represents its corresponding expert's capability, while each expert specializes in processing the tokens actually routed to it. The ERC loss is computationally efficient, operating only on n^2 activations, where n is the number of experts. This represents a fixed cost independent of batch size, unlike prior coupling methods that scale with the number of tokens (often millions per batch). Through pre-training MoE-LLMs ranging from 3B to 15B parameters and extensive analysis on trillions of tokens, we demonstrate the effectiveness of the ERC loss. Moreover, the ERC loss offers flexible control and quantitative tracking of expert specialization levels during training, providing valuable insights into MoEs.

Real-world users typically have access to multiple Large Language Models (LLMs) from different providers, and these LLMs often excel at distinct domains, yet none dominate all. Consequently, routing each task to the most suitable model becomes critical for both performance and cost. Existing routers treat this as a static, one-off classification problem. However, we identify the performance bottleneck for these routers as information deficit: simply augmenting a vanilla LLM router with performance statistics at the task-dimension level yields a 15.3% relative gain, surpassing a heuristic router built on the same dimension-level priors. Motivated by this finding, we propose Agent-as-a-Router, a framework that formalizes routing as a C-A-F loop (Context->Action->Feedback->Context). It closes the information gap by accumulating execution-grounded experience during deployment. We instantiate this framework as ACRouter, composed of an Orchestrator, a Verifier, a Memory module, and introduce CodeRouterBench, an evaluation environment comprising ~10K task instances with verified scores from 8 frontier LLMs, enabling regret-based router comparison on streaming tasks. Experiments show that ACRouter achieves the lowest cumulative regret on in-distribution tasks and generalizes to out-of-distribution agentic-programming tasks, demonstrating that our routing framework actively closes the information gap. Codes and benchmarks are released at https://github.com/LanceZPF/agent-as-a-router.

Production LLM deployments increasingly maintain heterogeneous model pools spanning order-of-magnitude cost differences. Existing routers make binary strong-vs-weak decisions and couple learned parameters to specific model identities, requiring retraining whenever the catalog changes. We present HyDRA (Hybrid Dynamic Routing Architecture), a framework that predicts fine-grained, multi-dimensional capability requirements per query and matches them against configuration-defined model profiles via shortfall matching. A ModernBERT encoder with K=4 independent sigmoid heads scores each query along reasoning, code generation, debugging, and tool use; a shortfall-matching algorithm then selects the cheapest model whose capabilities meet the predicted requirements. The deployed predictor runs at 86 ms median CPU inference latency in production, and is fully decoupled from the model catalog -- adding or removing models requires only a configuration change, with zero retraining. On SWE-Bench Verified (5-model pool: GPT-5.4-mini, Claude Haiku 4.5, GPT-5.3 Codex, Claude Sonnet 4.6, GPT-5.4), HyDRA's tunable shortfall threshold spans three regimes: peak-quality exceeds the always-strong Claude Sonnet 4.6 baseline (75.4% vs. 74.2% resolution) at 12.9% cost savings; iso-quality matches Sonnet at 54.1% cost savings, a 6x improvement over our prior in-house binary router at 9.1%; aggressive pushes savings to 72.5% for a 3.2-point quality trade. Results generalize across LiveCodeBench, BigCodeBench, and tau-bench. HyDRA is deployed to all users in GitHub Copilot's VS Code Chat auto-mode and -- to our knowledge for the first time in the LLM routing literature -- demonstrates language-invariant routing across CJK, European, and other script families.

LLM routing matters most in long-horizon applications such as coding agents, deep research systems, and computer-use agents, where a single user request triggers many model calls. Routing each call to the cheapest sufficient model can cut costs without sacrificing quality, yet existing router benchmarks evaluate routers only on one-shot prompts. They never expose the router-visible prefix at an intermediate agent step, never test whether a cheaper replacement preserves downstream task success, and often rely on online LLM judges at evaluation time. We introduce TwinRouterBench, a step-level routing benchmark with two tracks. The static track provides 970 router-visible prefixes from 520 instances across SWE-bench, BFCL, mtRAG, QMSum, and PinchBench, each paired with an execution-verified target tier estimated under a released downgrade-and-cascade protocol; scoring is deterministic arithmetic over tier labels, trajectory membership, and token costs, with no online evaluator-side LLM judge. The dynamic track supplies a harness that runs routers on the full 500-case SWE-bench Verified suite; in this paper we report a 100-case held-out evaluation disjoint from the static SWE supervision split. At each LLM call the router selects a concrete model from a locked pool, and success is measured by official task resolution and realized API spend. The two tracks support fast offline iteration followed by end-to-end validation under live agent execution. Code and data are available at https://github.com/CommonstackAI/TwinRouterBench.

Large Language Models (LLMs) demonstrate substantial accuracy gains when augmented with reasoning modes such as chain-of-thought and inference-time scaling. However, reasoning also incurs significant costs in inference latency and token usage, with environmental and financial impacts, which are unnecessary for many simple prompts. We present a semantic router that classifies queries based on their reasoning requirements and selectively applies reasoning only when beneficial. Our approach achieves a 10.2 percentage point improvement in accuracy on the MMLU-Pro benchmark while reducing response latency by 47.1% and token consumption by 48.5% compared to direct inference with vLLM. These results demonstrate that semantic routing offers an effective mechanism for striking a balance between accuracy and efficiency in open-source LLM serving systems

Efficient inference for on-device Large Language Models (LLMs) remains challenging due to limited hardware resources and the high cost of the prefill stage, which processes the full input context to construct Key-Value (KV) caches. We present SparKV, an adaptive KV loading framework that combines cloud-based KV streaming with on-device computation. SparKV models the cost of individual KV chunks and decides whether each chunk should be streamed or computed locally, while overlapping the two execution paths to reduce latency. To handle fluctuations in wireless connectivity and edge resource availability, SparKV further refines offline-generated schedules at runtime to rebalance communication and computation costs. Experiments across diverse datasets, LLMs, and edge devices show that SparKV reduces Time-to-First-Token by 1.3$x-5.1x with negligible impact on response quality, while lowering per-request energy consumption by 1.5x to 3.3x, demonstrating its robustness and practicality for real-world on-device deployment.