Daily Papers

Camouflaged object detection (COD) segments objects that intentionally blend with the background, so predictions depend on subtle texture and boundary cues. COD is often needed under tight on-device memory and latency budgets, making low-bit inference highly desirable. However, COD is unusually hard to quantify aggressively. We study post-training W4A4 quantization of Transformer-based COD and find a task-specific cliff: heavy-tailed background tokens dominate a shared activation range, inflating the step size and pushing weak-but-structured boundary cues into the zero bin. This exposes a token-local bottleneck -- remove cross-token range domination and bound the zero-bin mass under 4-bit activations. To address this, we introduce COD-TDQ, a COD-aware Token-group Dual-constraint activation Quantization method. COD-TDQ addresses this token-local bottleneck with two coupled steps: Direct-Sum Token-Group (DSTG) assigns token-group scales to suppress cross-token range domination, and Dual-Constraint Range Projection (DCRP) projects each token-group clip range to keep the step-to-dispersion ratio and the zero-bin mass bounded. Across four COD benchmarks and two baseline models (CFRN and ESCNet), COD-TDQ consistently achieves an Sαscore more than 0.12 higher than that of the state-of-the-art quantization method without retraining. The code will be released.

Diffusion Large Language Models (dLLMs) represent a new paradigm beyond autoregressive modeling, offering competitive performance while naturally enabling a flexible decoding process. Specifically, dLLMs can generate tokens at arbitrary positions in parallel, endowing them with significant potential for parallel test-time scaling, which was previously constrained by severe inefficiency in autoregressive modeling. In this work, we introduce dVoting, a fast voting technique that boosts reasoning capability without training, with only an acceptable extra computational overhead. dVoting is motivated by the observation that, across multiple samples for the same prompt, token predictions remain largely consistent, whereas performance is determined by a small subset of tokens exhibiting cross-sample variability. Leveraging the arbitrary-position generation capability of dLLMs, dVoting performs iterative refinement by sampling, identifying uncertain tokens via consistency analysis, regenerating them through voting, and repeating this process until convergence. Extensive evaluations demonstrate that dVoting consistently improves performance across various benchmarks. It achieves gains of 6.22%-7.66% on GSM8K, 4.40%-7.20% on MATH500, 3.16%-14.84% on ARC-C, and 4.83%-5.74% on MMLU. Our code is available at https://github.com/fscdc/dVoting

Recent advancements in reinforcement learning from human feedback have shown that utilizing fine-grained token-level reward models can substantially enhance the performance of Proximal Policy Optimization (PPO) in aligning large language models. However, it is challenging to leverage such token-level reward as guidance for Direct Preference Optimization (DPO), since DPO is formulated as a sequence-level bandit problem. To address this challenge, this work decomposes the sequence-level PPO into a sequence of token-level proximal policy optimization problems and then frames the problem of token-level PPO with token-level reward guidance, from which closed-form optimal token-level policy and the corresponding token-level reward can be derived. Using the obtained reward and Bradley-Terry model, this work establishes a framework of computable loss functions with token-level reward guidance for DPO, and proposes a practical reward guidance based on the induced DPO reward. This formulation enables different tokens to exhibit varying degrees of deviation from reference policy based on their respective rewards. Experiment results demonstrate that our method achieves substantial performance improvements over DPO, with win rate gains of up to 7.5 points on MT-Bench, 6.2 points on AlpacaEval 2, and 4.3 points on Arena-Hard. Code is available at https://github.com/dvlab-research/TGDPO.

This paper proposes a fundamentally new paradigm for image generation through set-based tokenization and distribution modeling. Unlike conventional methods that serialize images into fixed-position latent codes with a uniform compression ratio, we introduce an unordered token set representation to dynamically allocate coding capacity based on regional semantic complexity. This TokenSet enhances global context aggregation and improves robustness against local perturbations. To address the critical challenge of modeling discrete sets, we devise a dual transformation mechanism that bijectively converts sets into fixed-length integer sequences with summation constraints. Further, we propose Fixed-Sum Discrete Diffusion--the first framework to simultaneously handle discrete values, fixed sequence length, and summation invariance--enabling effective set distribution modeling. Experiments demonstrate our method's superiority in semantic-aware representation and generation quality. Our innovations, spanning novel representation and modeling strategies, advance visual generation beyond traditional sequential token paradigms. Our code and models are publicly available at https://github.com/Gengzigang/TokenSet.

Large Language Models (LLMs) have exhibited remarkable performance on reasoning tasks. They utilize autoregressive token generation to construct reasoning trajectories, enabling the development of a coherent chain of thought. In this work, we explore the impact of individual tokens on the final outcomes of reasoning tasks. We identify the existence of ``critical tokens'' that lead to incorrect reasoning trajectories in LLMs. Specifically, we find that LLMs tend to produce positive outcomes when forced to decode other tokens instead of critical tokens. Motivated by this observation, we propose a novel approach - cDPO - designed to automatically recognize and conduct token-level rewards for the critical tokens during the alignment process. Specifically, we develop a contrastive estimation approach to automatically identify critical tokens. It is achieved by comparing the generation likelihood of positive and negative models. To achieve this, we separately fine-tune the positive and negative models on various reasoning trajectories, consequently, they are capable of identifying identify critical tokens within incorrect trajectories that contribute to erroneous outcomes. Moreover, to further align the model with the critical token information during the alignment process, we extend the conventional DPO algorithms to token-level DPO and utilize the differential likelihood from the aforementioned positive and negative model as important weight for token-level DPO learning.Experimental results on GSM8K and MATH500 benchmarks with two-widely used models Llama-3 (8B and 70B) and deepseek-math (7B) demonstrate the effectiveness of the propsoed approach cDPO.

Machine unlearning is an emerging technique that removes the influence of a subset of training data (forget set) from a model without full retraining, with applications including privacy protection, content moderation, and model correction. The key challenge lies in ensuring that the model completely forgets the knowledge of the forget set without compromising its overall utility. Existing unlearning methods for large language models (LLMs) often utilize auxiliary language models, retain datasets, or even commercial AI services for effective unlearning and maintaining the model utility. However, dependence on these external resources is often impractical and could potentially introduce additional privacy risks. In this work, we propose direct token optimization (DTO), a novel self-contained unlearning approach for LLMs that directly optimizes the token level objectives and eliminates the need for external resources. Given a sequence to unlearn, we identify two categories of tokens: target tokens, which capture critical knowledge for unlearning, and the remaining non-target tokens, which are crucial for maintaining the model utility. The former are used to optimize the unlearning objective, while the latter serve to preserve the model's performance. The experimental results show that the proposed DTO achieves up to 16.8times improvement in forget quality on several benchmark datasets than the latest baselines while maintaining a comparable level of model utility.

Direct Preference Optimization is an offline post-SFT method for aligning language models from preference pairs, with strong results in instruction following and summarization. However, DPO's sequence-level implicit reward can be brittle for token-critical structured prediction settings such as medical annotation, which often exhibit (i) low-separation preference pairs, where chosen and rejected completions differ by minimal edit distance (often 1-3 tokens), and (ii) token-importance skew, where sparse semantic tokens (hierarchical labels and evidence Spans) carry disproportionate task importance relative to high-frequency structural tokens (JSON scaffolding). In this regime, standard DPO suffers from margin collapse (insufficient log-probability separation between near-identical preferences), likelihood squeezing (the margin objective shifts the absolute likelihoods of both completions together), and gradient dilution, where uniform sequence-level weighting diffuses learning signal across shared scaffolding while rare, confusable label tokens receive weak, noisy updates. We introduce Token-Adaptive Barrier Preference Optimization (TAB-PO), which augments DPO with token-weighted, reference-adjusted advantages that prioritize high-value semantic tokens, and a conditional token-level barrier that regularizes under-confident tokens balancing SFT-anchored likelihood and preference-driven separation in low-separation, importance-skewed regimes. We evaluate TAB-PO on medical communication annotation, a task requiring joint prediction of hierarchical labels and evidence Spans from patient-provider messages. TAB-PO achieves a ~ 4% relative improvement in micro-F1 over SFT and consistently outperforms recent preference-optimization baselines.

Speculative decoding accelerates autoregressive speech generation by letting a fast draft model propose tokens that a larger target model verifies. However, for speech LLMs that generate acoustic tokens, exact token matching is overly restrictive: many discrete tokens are acoustically or semantically interchangeable, reducing acceptance rates and limiting speedups. We introduce Principled Coarse-Graining (PCG), which verifies proposals at the level of Acoustic Similarity Groups (ASGs) derived from the target model's embedding space. By splitting each token's probability mass across the overlapping groups that contain it, we define an overlap-aware coarse-grained distribution and perform rejection sampling on the resulting group variable. This yields an exactness guarantee at the group level while allowing the accepted draft token to stand in for any member of the group in practice. On LibriTTS, PCG increases acceptance and throughput relative to standard speculative decoding and prior speech-specific relaxations while maintaining intelligibility and speaker similarity. These results suggest acoustically aware, group-level acceptance as a simple and general way to accelerate speech token generation while maintaining speech quality.

Decoder-only transformers have become the standard architecture for large language models (LLMs) due to their strong performance. Recent studies suggest that, in pre-trained LLMs, early, middle, and late layers may serve distinct roles: Early layers focus on understanding the input context, middle layers handle task-specific processing, and late layers convert abstract representations into output tokens. We hypothesize that once representations have been processed by the early and middle layers, the resulting hidden states may encapsulate sufficient information to support the generation of multiple tokens using only the late layers, eliminating the need to repeatedly traverse the early and middle layers. We refer to this inference paradigm as Direct Multi-Token Decoding (DMTD). Unlike speculative decoding, our method introduces no additional parameters, auxiliary routines, or post-generation verification. Despite being trained on a limited dataset, a fine-tuned DMTD Qwen3-4B model has already demonstrated promising results, achieving up to a 2x speedup with only minor performance loss. Moreover, as shown in our scaling analysis, its performance is expected to further improve with larger training datasets.

We introduce ``Partition Generative Models'' (PGMs), a novel approach to masked generative modeling (MGMs), particularly effective for masked diffusion language modeling (MDLMs). PGM divides tokens into two distinct groups and employs sparse attention patterns to prevent cross-group information exchange. Hence, the model is trained to predict tokens in one group based solely on information from the other group. This partitioning strategy eliminates the need for MASK tokens entirely. While traditional MGMs inefficiently process MASK tokens during generation, PGMs achieve greater computational efficiency by operating exclusively on unmasked tokens. Our experiments on OpenWebText with a context length of 1024 tokens demonstrate that PGMs deliver at least 5x improvements in both latency and throughput compared to MDLM when using the same number of sampling steps, while generating samples with better generative perplexity than MDLM. Finally, we show that PGMs can be distilled with Self-Distillation Through Time (SDTT), a method originally devised for MDLM, in order to achieve further inference gains.

Recent advancements adopt online reinforcement learning (RL) from LLMs to text-to-image rectified flow diffusion models for reward alignment. The use of group-level rewards successfully aligns the model with the targeted reward. However, it faces challenges including low efficiency, dependency on stochastic samplers, and reward hacking. The problem is that rectified flow models are fundamentally different from LLMs: 1) For efficiency, online image sampling takes much more time and dominates the time of training. 2) For stochasticity, rectified flow is deterministic once the initial noise is fixed. Aiming at these problems and inspired by the effects of group-level rewards from LLMs, we design Group-level Direct Reward Optimization (GDRO). GDRO is a new post-training paradigm for group-level reward alignment that combines the characteristics of rectified flow models. Through rigorous theoretical analysis, we point out that GDRO supports full offline training that saves the large time cost for image rollout sampling. Also, it is diffusion-sampler-independent, which eliminates the need for the ODE-to-SDE approximation to obtain stochasticity. We also empirically study the reward hacking trap that may mislead the evaluation, and involve this factor in the evaluation using a corrected score that not only considers the original evaluation reward but also the trend of reward hacking. Extensive experiments demonstrate that GDRO effectively and efficiently improves the reward score of the diffusion model through group-wise offline optimization across the OCR and GenEval tasks, while demonstrating strong stability and robustness in mitigating reward hacking.

Pretrained language models (LLMs) are often constrained by their fixed tokenization schemes, leading to inefficiencies and performance limitations, particularly for multilingual or specialized applications. This tokenizer lock-in presents significant challenges. standard methods to overcome this often require prohibitive computational resources. Although tokenizer replacement with heuristic initialization aims to reduce this burden, existing methods often require exhaustive residual fine-tuning and still may not fully preserve semantic nuances or adequately address the underlying compression inefficiencies. Our framework introduces two innovations: first, Tokenadapt, a model-agnostic tokenizer transplantation method, and second, novel pre-tokenization learning for multi-word Supertokens to enhance compression and reduce fragmentation. Tokenadapt initializes new unique token embeddings via a hybrid heuristic that combines two methods: a local estimate based on subword decomposition using the old tokenizer, and a global estimate utilizing the top-k semantically similar tokens from the original vocabulary. This methodology aims to preserve semantics while significantly minimizing retraining requirements. Empirical investigations validate both contributions: the transplantation heuristic successfully initializes unique tokens, markedly outperforming conventional baselines and sophisticated methods including Transtokenizer and ReTok, while our Supertokens achieve notable compression gains. Our zero-shot perplexity results demonstrate that the TokenAdapt hybrid initialization consistently yields lower perplexity ratios compared to both ReTok and TransTokenizer baselines across different base models and newly trained target tokenizers. TokenAdapt typically reduced the overall perplexity ratio significantly compared to ReTok, yielding at least a 2-fold improvement in these aggregate scores.

Diffusion Transformers (DiTs) are essential for video generation but suffer from significant latency due to the quadratic complexity of attention. By computing only critical tokens, sparse attention reduces computational costs and offers a promising acceleration approach. However, we identify that existing methods fail to approach optimal generation quality under the same computation budget for two reasons: (1) Inaccurate critical token identification: current methods cluster tokens based on position rather than semantics, leading to imprecise aggregated representations. (2) Excessive computation waste: critical tokens are scattered among non-critical ones, leading to wasted computation on GPUs, which are optimized for processing contiguous tokens. In this paper, we propose SVG2, a training-free framework that maximizes identification accuracy and minimizes computation waste, achieving a Pareto frontier trade-off between generation quality and efficiency. The core of SVG2 is semantic-aware permutation, which clusters and reorders tokens based on semantic similarity using k-means. This approach ensures both a precise cluster representation, improving identification accuracy, and a densified layout of critical tokens, enabling efficient computation without padding. Additionally, SVG2 integrates top-p dynamic budget control and customized kernel implementations, achieving up to 2.30x and 1.89x speedup while maintaining a PSNR of up to 30 and 26 on HunyuanVideo and Wan 2.1, respectively.

In modern large language models (LLMs), LLM alignment is of crucial importance and is typically achieved through methods such as reinforcement learning from human feedback (RLHF) and direct preference optimization (DPO). However, in most existing methods for LLM alignment, all tokens in the response are optimized using a sparse, response-level reward or preference annotation. The ignorance of token-level rewards may erroneously punish high-quality tokens or encourage low-quality tokens, resulting in suboptimal performance and slow convergence speed. To address this issue, we propose AlignDistil, an RLHF-equivalent distillation method for token-level reward optimization. Specifically, we introduce the reward learned by DPO into the RLHF objective and theoretically prove the equivalence between this objective and a token-level distillation process, where the teacher distribution linearly combines the logits from the DPO model and a reference model. On this basis, we further bridge the accuracy gap between the reward from the DPO model and the pure reward model, by building a contrastive DPO reward with a normal and a reverse DPO model. Moreover, to avoid under- and over-optimization on different tokens, we design a token adaptive logit extrapolation mechanism to construct an appropriate teacher distribution for each token. Experimental results demonstrate the superiority of our AlignDistil over existing methods and showcase fast convergence due to its token-level distributional reward optimization.

Reinforcement Learning From Human Feedback (RLHF) has been a critical to the success of the latest generation of generative AI models. In response to the complex nature of the classical RLHF pipeline, direct alignment algorithms such as Direct Preference Optimization (DPO) have emerged as an alternative approach. Although DPO solves the same objective as the standard RLHF setup, there is a mismatch between the two approaches. Standard RLHF deploys reinforcement learning in a specific token-level MDP, while DPO is derived as a bandit problem in which the whole response of the model is treated as a single arm. In this work we rectify this difference, first we theoretically show that we can derive DPO in the token-level MDP as a general inverse Q-learning algorithm, which satisfies the Bellman equation. Using our theoretical results, we provide three concrete empirical insights. First, we show that because of its token level interpretation, DPO is able to perform some type of credit assignment. Next, we prove that under the token level formulation, classical search-based algorithms, such as MCTS, which have recently been applied to the language generation space, are equivalent to likelihood-based search on a DPO policy. Empirically we show that a simple beam search yields meaningful improvement over the base DPO policy. Finally, we show how the choice of reference policy causes implicit rewards to decline during training. We conclude by discussing applications of our work, including information elicitation in multi-tun dialogue, reasoning, agentic applications and end-to-end training of multi-model systems.

Obtaining a single-vector representation from a Large Language Model's (LLM) token-level outputs is a critical step for nearly all sentence-level tasks. However, standard pooling methods like mean or max aggregation treat tokens as an independent set, discarding the rich relational structure captured by the model's self-attention layers and making them susceptible to signal dilution. To address this, we introduce GLOT, a lightweight, structure-aware pooling module that reframes pooling as relational learning followed by aggregation. Operating on the outputs of a frozen LLM, GLOT first constructs a latent token-similarity graph, then refines token representations with a graph neural network, and finally aggregates them using a readout layer. Experimentally, our approach is remarkably robust and efficient: on a diagnostic stress test where 90% of tokens are random distractors, GLOT maintains over 97% accuracy while baseline methods collapse. Furthermore, it is competitive with state-of-the-art techniques on benchmarks like GLUE and MTEB with 20x fewer trainable parameters and speeds up the training time by over 100x compared with parameter-efficient fine-tuning methods. Supported by a theoretical analysis of its expressive power, our work shows that learning over token graphs is a powerful paradigm for the efficient adaptation of frozen LLMs. Our code is published at https://github.com/ipsitmantri/GLOT.

Multi-agent LLM applications organize execution in synchronized rounds where a central scheduler gathers outputs from all agents and redistributes the combined context. This All-Gather communication pattern creates massive KV Cache redundancy, because every agent's prompt contains the same shared output blocks, yet existing reuse methods fail to exploit it efficiently. We present TokenDance, a system that scales the number of concurrent agents by exploiting the All-Gather pattern for collective KV Cache sharing. TokenDance's KV Collector performs KV Cache reuse over the full round in one collective step, so the cost of reusing a shared block is paid once regardless of agent count. Its Diff-Aware Storage encodes sibling caches as block-sparse diffs against a single master copy, achieving 11-17x compression on representative workloads. Evaluation on GenerativeAgents and AgentSociety shows that TokenDance supports up to 2.7x more concurrent agents than vLLM with prefix caching under SLO requirement, reduces per-agent KV Cache storage by up to 17.5x, and achieves up to 1.9x prefill speedup over per-request position-independent caching.

Fine-tuning pre-trained Large Language Models (LLMs) is essential to align them with human values and intentions. This process often utilizes methods like pairwise comparisons and KL divergence against a reference LLM, focusing on the evaluation of full answers generated by the models. However, the generation of these responses occurs in a token level, following a sequential, auto-regressive fashion. In this paper, we introduce Token-level Direct Preference Optimization (TDPO), a novel approach to align LLMs with human preferences by optimizing policy at the token level. Unlike previous methods, which face challenges in divergence efficiency, TDPO incorporates forward KL divergence constraints for each token, improving alignment and diversity. Utilizing the Bradley-Terry model for a token-based reward system, TDPO enhances the regulation of KL divergence, while preserving simplicity without the need for explicit reward modeling. Experimental results across various text tasks demonstrate TDPO's superior performance in balancing alignment with generation diversity. Notably, fine-tuning with TDPO strikes a better balance than DPO in the controlled sentiment generation and single-turn dialogue datasets, and significantly improves the quality of generated responses compared to both DPO and PPO-based RLHF methods. Our code is open-sourced at https://github.com/Vance0124/Token-level-Direct-Preference-Optimization.

Reasoning is critical for large language models (LLMs) to excel in a wide range of tasks. While methods like Chain-of-Thought (CoT) reasoning enhance LLM performance by decomposing problems into intermediate steps, they also incur significant overhead in token usage, leading to increased costs. We find that the reasoning process of current LLMs is unnecessarily lengthy and it can be compressed by including a reasonable token budget in the prompt, but the choice of token budget plays a crucial role in the actual compression effectiveness. We then propose a token-budget-aware LLM reasoning framework, which dynamically estimates token budgets for different problems based on reasoning complexity and uses the estimated token budgets to guide the reasoning process. Experiments show that our method effectively reduces token costs in CoT reasoning with only a slight performance reduction, offering a practical solution to balance efficiency and accuracy in LLM reasoning. Code: https://github.com/GeniusHTX/TALE.

Large language models (LLMs) demonstrate proficiency across numerous computational tasks, yet their inner workings remain unclear. In theory, the combination of causal self-attention and multilayer perceptron layers allows every token to access and compute information based on all preceding tokens. In practice, to what extent are such operations present? In this paper, on mental math tasks (i.e., direct math calculation via next-token prediction without explicit reasoning), we investigate this question in three steps: inhibiting input-specific token computations in the initial layers, restricting the routes of information transfer across token positions in the next few layers, and forcing all computation to happen at the last token in the remaining layers. With two proposed techniques, Context-Aware Mean Ablation (CAMA) and Attention-Based Peeking (ABP), we identify an All-for-One subgraph (AF1) with high accuracy on a wide variety of mental math tasks, where meaningful computation occurs very late (in terms of layer depth) and only at the last token, which receives information of other tokens in few specific middle layers. Experiments on a variety of models and arithmetic expressions show that this subgraph is sufficient and necessary for high model performance, transfers across different models, and works on a variety of input styles. Ablations on different CAMA and ABP alternatives reveal their unique advantages over other methods, which may be of independent interest.

Group-relative policy optimization methods train language models by generating multiple rollouts per prompt and normalizing rewards with a shared mean reward baseline. In resource-constrained settings where the rollout budget is small, accuracy often degrades. We find that noise in the shared baseline induces advantage sign flips, where some rollouts receive an incorrect advantage sign, and the update direction is reversed. To address this, we propose Median-Centered Group Relative Policy Optimization (MC-GRPO), a simple and effective solution for small-rollout training. Our main idea is to replace the mean baseline with a median baseline: the median is far less sensitive to outlier rewards than the mean, mitigating the sign flips under small rollout size (G). We generate one additional rollout for median reference (G+1), and compute advantages by using the group median. With an odd-sized group, exactly one completion is the median and receives zero advantage, we exclude this pivot rollout from backpropagation so the number of gradient-contributing samples per prompt remains G, preserving the core update cost of standard G-rollout training. Across various GRPO-family methods and a wide range of models and scales, this median-centered training consistently improves stability and final accuracy in the low-rollout regime, reducing the gap between G=2 and G=8 to within 1%. Code is available at https://github.com/lotusroot-kim/MC-GRPO

Tokenization is the first - and often underappreciated - layer of computation in language models. While Chain-of-Thought (CoT) prompting enables transformer models to approximate recurrent computation by externalizing intermediate steps, we show that the success of such reasoning is fundamentally bounded by the structure of tokenized inputs. This work presents a theoretical and empirical investigation into how tokenization schemes, particularly subword-based methods like byte-pair encoding (BPE), impede symbolic computation by merging or obscuring atomic reasoning units. We introduce the notion of Token Awareness to formalize how poor token granularity disrupts logical alignment and prevents models from generalizing symbolic procedures. Through systematic evaluation on arithmetic and symbolic tasks, we demonstrate that token structure dramatically affect reasoning performance, causing failure even with CoT, while atomically-aligned formats unlock strong generalization, allowing small models (e.g., GPT-4o-mini) to outperform larger systems (e.g., o1) in structured reasoning. Our findings reveal that symbolic reasoning ability in LLMs is not purely architectural, but deeply conditioned on token-level representations.

Group-based reinforcement learning algorithms such as Group Reward Policy Optimization (GRPO) have proven effective for fine-tuning large language models (LLMs) with human feedback. However, generating and storing multiple responses per prompt incurs substantial memory overhead, especially as the sample group size increases, limiting scalability under constrained hardware. We propose Infinite Sampling, a framework that enables efficient and stable GRPO training by decoupling group size from GPU memory usage. It consists of: (1) micro sampling groups that decompose large groups into memory-feasible rounds; (2) continuous sampling that interleaves generation across groups to improve utilization; and (3) a length-aware scheduler combining token-conditioned sequence length prediction with a two-stage plan: global grouping via FPTAS and runtime refill via SJF. Experiments show that our Micro Sampling Groups reduce peak memory usage by over 50% compared to full-group decoding (e.g., from 21.55 GB to 10.64 GB on Qwen3-1.7B). Building on this, Infinite Sampling improves throughput by over 25% compared to the naive micro sampling group method, reducing decoding steps while maintaining full-length completions and memory usage. Our hybrid scheduling ensures efficient and stable GRPO training with larger groups under realistic GPU memory constraints.

Reinforcement Learning (RL) for Large Language Models (LLMs) often suffers from training collapse in long-horizon tasks due to exploding gradient variance. To mitigate this, a baseline is commonly introduced for advantage computation; however, traditional value models remain difficult to optimize, and standard group-based baselines overlook sequence heterogeneity. Although classic optimal baseline theory can achieve global variance reduction, it neglects token heterogeneity and requires prohibitive gradient-based computation. In this work, we derive the Optimal Token Baseline (OTB) from first principles, proving that gradient updates should be weighted inversely to their cumulative gradient norm. To ensure efficiency, we propose the Logit-Gradient Proxy that approximates the gradient norm using only forward-pass probabilities. Our method achieves training stability and matches the performance of large group sizes (N=32) with only N=4, reducing token consumption by over 65% across single-turn and tool-integrated reasoning tasks.

Frontier LLMs are increasingly utilised across academia, society and industry. A commonly used unit for comparing models, their inputs and outputs, and estimating inference pricing is the token. In general, tokens are used as a stable currency, assumed to be broadly consistent across tokenizers and contexts, enabling direct comparisons. However, tokenization varies significantly across models and domains of text, making naive interpretation of token counts problematic. We quantify this variation by providing a comprehensive empirical analysis of tokenization, exploring the compression of sequences to tokens across different distributions of textual data. Our analysis challenges commonly held heuristics about token lengths, finding them to be overly simplistic. We hope the insights of our study add clarity and intuition toward tokenization in contemporary LLMs.

Knowledge Distillation (KD) can transfer the reasoning abilities of large models to smaller ones, which can reduce the costs to generate Chain-of-Thoughts for reasoning tasks. KD methods typically ask the student to mimic the teacher's distribution over the entire output. However, a student with limited capacity can be overwhelmed by such extensive supervision causing a distribution mismatch, especially in complex reasoning tasks. We propose Token-Selective Dual Knowledge Distillation (TSD-KD), a framework for student-centric distillation. TSD-KD focuses on distilling important tokens for reasoning and encourages the student to explain reasoning in its own words. TSD-KD combines indirect and direct distillation. Indirect distillation uses a weak form of feedback based on preference ranking. The student proposes candidate responses generated on its own; the teacher re-ranks those candidates as indirect feedback without enforcing its entire distribution. Direct distillation uses distribution matching; however, it selectively distills tokens based on the relative confidence between teacher and student. Finally, we add entropy regularization to maintain the student's confidence during distillation. Overall, our method provides the student with targeted and indirect feedback to support its own reasoning process and to facilitate self-improvement. The experiments show the state-of-the-art performance of TSD-KD on 10 challenging reasoning benchmarks, outperforming the baseline and runner-up in accuracy by up to 54.4\% and 40.3\%, respectively. Notably, a student trained by TSD-KD even outperformed its own teacher model in four cases by up to 20.3\%. The source code is available at https://github.com/kmswin1/TSD-KD.

Autoregressive (AR) modeling, known for its next-token prediction paradigm, underpins state-of-the-art language and visual generative models. Traditionally, a ``token'' is treated as the smallest prediction unit, often a discrete symbol in language or a quantized patch in vision. However, the optimal token definition for 2D image structures remains an open question. Moreover, AR models suffer from exposure bias, where teacher forcing during training leads to error accumulation at inference. In this paper, we propose xAR, a generalized AR framework that extends the notion of a token to an entity X, which can represent an individual patch token, a cell (a ktimes k grouping of neighboring patches), a subsample (a non-local grouping of distant patches), a scale (coarse-to-fine resolution), or even a whole image. Additionally, we reformulate discrete token classification as continuous entity regression, leveraging flow-matching methods at each AR step. This approach conditions training on noisy entities instead of ground truth tokens, leading to Noisy Context Learning, which effectively alleviates exposure bias. As a result, xAR offers two key advantages: (1) it enables flexible prediction units that capture different contextual granularity and spatial structures, and (2) it mitigates exposure bias by avoiding reliance on teacher forcing. On ImageNet-256 generation benchmark, our base model, xAR-B (172M), outperforms DiT-XL/SiT-XL (675M) while achieving 20times faster inference. Meanwhile, xAR-H sets a new state-of-the-art with an FID of 1.24, running 2.2times faster than the previous best-performing model without relying on vision foundation modules (\eg, DINOv2) or advanced guidance interval sampling.

Recent advancements in reinforcement learning, particularly through Group Relative Policy Optimization (GRPO), have significantly improved multimodal large language models for complex reasoning tasks. However, two critical limitations persist: 1) they often produce unfocused, verbose reasoning chains that obscure salient spatiotemporal cues and 2) binary rewarding fails to account for partially correct answers, resulting in high reward variance and inefficient learning. In this paper, we propose TW-GRPO, a novel framework that enhances visual reasoning with focused thinking and dense reward granularity. Specifically, we employs a token weighting mechanism that prioritizes tokens with high informational density (estimated by intra-group variance), suppressing redundant tokens like generic reasoning prefixes. Furthermore, we reformulate RL training by shifting from single-choice to multi-choice QA tasks, where soft rewards enable finer-grained gradient estimation by distinguishing partial correctness. Additionally, we propose question-answer inversion, a data augmentation strategy to generate diverse multi-choice samples from existing benchmarks. Experiments demonstrate state-of-the-art performance on several video reasoning and general understanding benchmarks. Notably, TW-GRPO achieves 50.4\% accuracy on CLEVRER (18.8\% improvement over Video-R1) and 65.8\% on MMVU. Our codes are available at https://github.com/longmalongma/TW-GRPO.

Rubric-based Reinforcement Learning (RL) has emerged as a promising approach for aligning Large Language Models (LLMs) with complex, open-domain instruction following tasks. However, existing methods predominantly rely on response-level rewards, introducing severe reward sparsity and reward ambiguity problems. To address these issues, we propose Rubrics to Tokens (RTT), a novel rubric-based RL framework that bridges coarse response-level scores and fine-grained token-level credit assignment. RTT introduces a Token-Level Relevance Discriminator to predict which tokens in the response are responsible for a specific constraint, and optimizes the policy model via RTT-GRPO, which integrates response-level and token-level advantages within a unified framework. Furthermore, when transitioning from one-dimensional, outcome-level reward to three-dimensional reward space in the token-level rubric-based RL, we propose a novel group normalization method, called Intra-sample Token Group Normalization, to accommodate this shift. Extensive experiments and benchmarks demonstrate that RTT consistently outperforms other baselines in both instruction- and rubric-level accuracy across different models.

On-policy distillation transfers reasoning capabilities by training a student model on its own generated trajectories using token-level feedback from a teacher. However, we identify a critical bottleneck, Supervision Fidelity Decay (SFD): as student-generated prefixes lengthen, the teacher's next-token distribution becomes less confident and less discriminative. Consequently, the teacher-dependent corrective signal in reverse-KL distillation weakens, causing student drift to compound across long reasoning chains. To mitigate SFD, we introduce Lookahead Group Reward (\ours{)}. Building on the insight that next-step teacher confidence reflects the discriminative strength of future reverse-KL supervision, evaluates the student's top-K candidate tokens by the teacher confidence they induce at the subsequent step and assigns a group-normalized reward. To maintain computational efficiency, we further design an entropy-triggered tree-attention mechanism. Across six math and code benchmarks, improves mean@8 by 2.57 points over OPD for a 7B student, with gains increasing in longer-generation and reaching +4.92 points on AIME-26 at 39k tokens.

Reinforcement learning (RL) is a pivotal task for enhancing Large Language Model (LLM) reasoning. Conventional algorithms, however, typically adhere to a coarse-grained credit assignment paradigm, applying a uniform reward to all tokens in a sequence, a critical flaw in long-chain reasoning tasks. In this paper, we address this challenge and propose Dynamic Entropy Weighting, a novel mechanism that facilitates fine-grained rewards through two new algorithms: Group Token Policy Optimization (GTPO), which assigns an entropy-weighted reward to each token, and the analogous algorithm Sequence-Level GRPO (GRPO-S). Our approach is founded on the hypothesis that high policy entropy within a reasoning path is a powerful heuristic for cognitive effort at pivotal junctures, which can be repurposed into a learning signal. By repurposing policy entropy for reward shaping, we achieve true per-token credit assignment. Experimental results across challenging reasoning benchmarks validate the superiority of our approach, showing our methods significantly outperform a strong DAPO baseline and confirming our entropy-weighting mechanism as the key driver of this performance boost.

Recently, large-scale pre-training methods like CLIP have made great progress in multi-modal research such as text-video retrieval. In CLIP, transformers are vital for modeling complex multi-modal relations. However, in the vision transformer of CLIP, the essential visual tokenization process, which produces discrete visual token sequences, generates many homogeneous tokens due to the redundancy nature of consecutive and similar frames in videos. This significantly increases computation costs and hinders the deployment of video retrieval models in web applications. In this paper, to reduce the number of redundant video tokens, we design a multi-segment token clustering algorithm to find the most representative tokens and drop the non-essential ones. As the frame redundancy occurs mostly in consecutive frames, we divide videos into multiple segments and conduct segment-level clustering. Center tokens from each segment are later concatenated into a new sequence, while their original spatial-temporal relations are well maintained. We instantiate two clustering algorithms to efficiently find deterministic medoids and iteratively partition groups in high dimensional space. Through this token clustering and center selection procedure, we successfully reduce computation costs by removing redundant visual tokens. This method further enhances segment-level semantic alignment between video and text representations, enforcing the spatio-temporal interactions of tokens from within-segment frames. Our method, coined as CenterCLIP, surpasses existing state-of-the-art by a large margin on typical text-video benchmarks, while reducing the training memory cost by 35\% and accelerating the inference speed by 14\% at the best case. The code is available at {https://github.com/mzhaoshuai/CenterCLIP}{{https://github.com/mzhaoshuai/CenterCLIP}}.

Dataset Distillation aims to compress a large dataset into a small synthetic one while maintaining predictive performance. We show that as different demographic groups exhibit distinct predictive patterns, the distillation process struggles to simultaneously preserve informative signals for all subgroups, regardless of whether group sizes are mildly or severely imbalanced. Consequently, models trained on distilled data can experience substantial performance drops for certain subgroups, leading to fairness gaps. Crucially, these gaps do not disappear by merely correcting group imbalance, since they stem from fundamental mismatches in subgroup predictive patterns rather than from sample-size disparities alone. We therefore formally analyze the interaction between these two sources of bias and cast the solution as identifying a group-imbalance-agnostic barycenter of the predictive information that induces similar representations across all subgroups. By distilling toward this shared aggregate representation, we show that group fairness concerns can be reduced. Our approach is compatible with existing distillation methods, and empirical results show that it substantially reduces bias introduced by dataset distillation.

Direct preference optimization (DPO), a widely adopted offline preference optimization algorithm, aims to align large language models (LLMs) with human-desired behaviors using pairwise preference data. However, the winning response and the losing response within pairwise data are generated isolatedly, leading to weak correlations between them as well as suboptimal alignment performance. To address this issue, we propose an effective framework named BMC, for bridging and modeling correlations in pairwise data. Firstly, we increase the consistency and informativeness of the pairwise preference signals by targeted modifications, synthesizing a pseudo winning response through improving the losing response based on the winning response. Secondly, we identify that DPO alone is insufficient to model these correlations and capture nuanced variations. Therefore, we propose learning token-level correlations by dynamically leveraging the policy model's confidence during training. Comprehensive experiments on QA, math, and instruction-following tasks demonstrate the effectiveness of our approach, significantly surpassing competitive baselines, including DPO. Additionally, our in-depth quantitative analysis reveals the reasons behind our method's superior performance over DPO and showcases its versatility to other DPO variants.

Recently, autoregressive (AR) image models have demonstrated remarkable generative capabilities, positioning themselves as a compelling alternative to diffusion models. However, their sequential nature leads to long inference times, limiting their practical scalability. In this work, we introduce Grouped Speculative Decoding (GSD), a novel, training-free acceleration method for AR image models. While recent studies have explored Speculative Decoding (SD) as a means to speed up AR image generation, existing approaches either provide only modest acceleration or require additional training. Our in-depth analysis reveals a fundamental difference between language and image tokens: image tokens exhibit inherent redundancy and diversity, meaning multiple tokens can convey valid semantics. However, traditional SD methods are designed to accept only a single most-likely token, which fails to leverage this difference, leading to excessive false-negative rejections. To address this, we propose a new SD strategy that evaluates clusters of visually valid tokens rather than relying on a single target token. Additionally, we observe that static clustering based on embedding distance is ineffective, which motivates our dynamic GSD approach. Extensive experiments show that GSD accelerates AR image models by an average of 3.7x while preserving image quality-all without requiring any additional training. The source code is available at https://github.com/junhyukso/GSD

Reinforcement learning with verifiable rewards (RLVR) has become a central paradigm for improving reasoning and code generation in large language models, and GRPO-style training is widely adopted for its simplicity and effectiveness. However, an important design choice remains underexplored: how token-level policy gradient terms are aggregated within each sampled group. Standard GRPO uses sequence aggregation, while recent work has advocated token aggregation as a better alternative. We show that these two rules induce different optimization biases: token aggregation introduces sign-length coupling, while sequence aggregation implicitly downweights longer responses through sequence-level equal weighting. To address this tension, we propose Balanced Aggregation (BA), a simple drop-in replacement that computes token-level means separately within the positive and negative subsets and then combines them with sequence-count-based weights. Experiments with Qwen2.5-Math-7B and Qwen3-1.7B on DAPO-17k and Polaris, evaluated on six reasoning and coding benchmarks, show that BA consistently improves training stability and final performance over standard token and sequence aggregation. Our analysis further shows that the relative effectiveness of token and sequence aggregation is largely governed by response-length variation and the positive-negative length gap, highlighting aggregation as a critical design dimension in GRPO-style RLVR.

Diffusion Language Models (DLMs) have emerged as a compelling alternative to autoregressive approaches, enabling parallel text generation with competitive performance. Despite these advantages, there is a critical instability in DLMs: the moving sink phenomenon. Our analysis indicates that sink tokens exhibit low-norm representations in the Transformer's value space, and that the moving sink phenomenon serves as a protective mechanism in DLMs to prevent excessive information mixing. However, their unpredictable positions across diffusion steps undermine inference robustness. To resolve this, we propose a simple but effective extra sink token implemented via a modified attention mask. Specifically, we introduce a special token constrained to attend solely to itself, while remaining globally visible to all other tokens. Experimental results demonstrate that introducing a single extra token stabilizes attention sinks, substantially improving model performance. Crucially, further analysis confirms that the effectiveness of this token is independent of its position and characterized by negligible semantic content, validating its role as a robust and dedicated structural sink.

Despite excellent average-case performance of many image classifiers, their performance can substantially deteriorate on semantically coherent subgroups of the data that were under-represented in the training data. These systematic errors can impact both fairness for demographic minority groups as well as robustness and safety under domain shift. A major challenge is to identify such subgroups with subpar performance when the subgroups are not annotated and their occurrence is very rare. We leverage recent advances in text-to-image models and search in the space of textual descriptions of subgroups ("prompts") for subgroups where the target model has low performance on the prompt-conditioned synthesized data. To tackle the exponentially growing number of subgroups, we employ combinatorial testing. We denote this procedure as PromptAttack as it can be interpreted as an adversarial attack in a prompt space. We study subgroup coverage and identifiability with PromptAttack in a controlled setting and find that it identifies systematic errors with high accuracy. Thereupon, we apply PromptAttack to ImageNet classifiers and identify novel systematic errors on rare subgroups.

Standard subword tokenization methods fragment numbers inconsistently, causing large language models (LLMs) to lose positional and decimal structure - a primary driver of errors in arithmetic and scientific reasoning. We introduce Triadic Suffix Tokenization (TST), a deterministic scheme that partitions digits into three-digit triads and annotates each triad with an explicit magnitude marker. Critically, the scheme defines a fixed, one-to-one mapping between suffixes and orders of magnitude for the integer part (thousands, millions, billions, etc.) and a parallel system of replicated markers for fractional depth (tenths, thousandths, millionths, etc.). Unlike approaches that rely on positional inference, this method provides a consistent gradient signal, which should ensure stable convergence. Two implementation variants are proposed: (1) a vocabulary-based approach that adds at most 10,000 fixed tokens to an existing vocabulary, covering 33 orders of magnitude (10^{-15} to 10^{18}); and (2) a suffix-marker approach that uses a small set of special tokens to denote magnitude dynamically. Both variants preserve exact digits while making order-of-magnitude relationships transparent at the token level. The framework is inherently scalable, allowing for linear vocabulary expansion to accommodate arbitrary precision and range. TST is architecture-agnostic and can be integrated as a drop-in preprocessing step. Experimental validation is deferred to future work.

Reinforcement learning (RL) is the dominant paradigm for post-training large language models. However, in the online, on-policy setting, rollout generation dominates the computational cost of training. Group-based policy optimization methods compute advantages from multiple rollouts per prompt, yet they indiscriminately allocate budget to prompts with collapsed reward distributions, wasting expensive rollouts on negligible learning signals. We demonstrate that group-based updates are most effective in regimes of high reward variance. Since the policy evolves throughout training, prompt informativeness must be estimated online rather than precomputed, but exhaustively evaluating every prompt is computationally prohibitive. We introduce Pilot-Commit, a budget-aware rollout allocation framework for group-based RL post-training. Pilot-Commit decouples prompt evaluation from exploitation: a pilot stage estimates per-prompt informativeness using a fraction of the budget, and the remaining rollouts are allocated to high-leverage prompts while low-signal prompts are skipped. Across multiple math reasoning benchmarks and model scales from 1.5B to 14B parameters, Pilot-Commit matches baseline accuracy with significantly lower sampling costs, reaching target accuracy up to 1.9times faster than GRPO and 4.0times faster than DAPO in cumulative rollouts.

Reinforcement learning (RL) has become a key driver of progress in large language models, but scaling RL to long chain-of-thought (CoT) trajectories is increasingly constrained by backpropagation over every generated token. Even with optimized rollout engines, full-token updates can consume a large fraction of total training cost, turning token length into a hidden tax on RL. We introduce Not All Tokens Are Needed (NAT), a unified framework that makes the token budget a first-class optimization primitive. NAT updates the policy using only a selected subset of generated tokens while preserving the learning signal of full-sequence RL. The core idea is an unbiased partial-token policy-gradient estimator via Horvitz-Thompson reweighting, which ensures statistically correct gradients despite subsampling. We instantiate NAT with two simple, plug-and-play token selection schemes: Uniform Random Sampling (URS) and Random Prefix Cutting (RPC), both of which reduce forward and backward compute and memory without modifying the reward computation or rollout pipeline. Across mathematical reasoning benchmarks, NAT matches full-token GRPO performance while using as few as 50% of tokens, providing an efficient and orthogonal pathway to scaling RL beyond the limits imposed by long trajectories. In our experiments, RPC saves 18% peak GPU memory and 29% forward and backward RL training time for Qwen3-8B.

As LLM agents evolve, tokens have emerged as the core economic primitives of Agentic AI. However, their exponential consumption introduces severe computational, collaborative, and security bottlenecks. Current surveys remain fragmented across system optimization, architecture design, and trust, lacking a unified framework to evaluate the fundamental trade-off between output quality and economic cost. To bridge this gap, this survey presents the first comprehensive survey of Token Economics. By unifying computer science and economics, we conceptualize tokens as production factors, exchange mediums, and units of account. We synthesize existing literature across a four-dimensional taxonomy: (1) Micro-level (Single Agent): Optimizing budget-constrained factor substitution via neoclassical firm theory. (2) Meso-level (Multi-Agent Systems): Minimizing collaboration friction using transaction cost and principal-agent theories. (3) Macro-level (Agent Ecosystems): Addressing congestion externalities and pricing via mechanism design. (4) Security: Internalizing adversarial threats as endogenous economic constraints. Finally, we outline frontier directions, including differentiable token budgets and dynamic markets, to lay the theoretical foundation for scalable next-generation agent systems.

LLM inference is still evaluated mainly as a model or software problem: accuracy, latency, throughput, and hardware utilization. This is incomplete. At deployment scale, the relevant output is a quality-conditioned token produced under joint constraints from effective compute, delivered data-center power, cooling capacity, PUE, and utilization. We argue that the ML community should treat inference as energy-to-token production. We formalize this view with a dimensionally consistent Token Production Function in which token rate is bounded by both compute-per-token and energy-per-token ceilings. Listed API prices vary by over an order of magnitude across providers, but we use price dispersion only as directional motivation, not as causal evidence of marginal cost. The core physical question is instead: under fixed quality and service targets, when does the binding constraint move from theoretical peak compute toward delivered power, cooling, and operational efficiency? Under this framing, system optimizations -- latent KV-cache compression, sparse or heavily compressed attention, quantization, routing, and difficulty-adaptive reasoning -- are not merely local engineering tricks. They are energy-to-token levers because they reduce FLOPs/token, joules/token, memory traffic, or utilization losses under fixed (q^{*},s^{*}). We therefore call for inference papers and benchmarks to report Joules/token, active binding constraint, PUE-adjusted delivered power, and utilization-adjusted token output alongside accuracy and latency.

Leveraging Large Language Models (LLMs) for generative recommendation has attracted significant research interest, where item tokenization is a critical step. It involves assigning item identifiers for LLMs to encode user history and generate the next item. Existing approaches leverage either token-sequence identifiers, representing items as discrete token sequences, or single-token identifiers, using ID or semantic embeddings. Token-sequence identifiers face issues such as the local optima problem in beam search and low generation efficiency due to step-by-step generation. In contrast, single-token identifiers fail to capture rich semantics or encode Collaborative Filtering (CF) information, resulting in suboptimal performance. To address these issues, we propose two fundamental principles for item identifier design: 1) integrating both CF and semantic information to fully capture multi-dimensional item information, and 2) designing order-agnostic identifiers without token dependency, mitigating the local optima issue and achieving simultaneous generation for generation efficiency. Accordingly, we introduce a novel set identifier paradigm for LLM-based generative recommendation, representing each item as a set of order-agnostic tokens. To implement this paradigm, we propose SETRec, which leverages CF and semantic tokenizers to obtain order-agnostic multi-dimensional tokens. To eliminate token dependency, SETRec uses a sparse attention mask for user history encoding and a query-guided generation mechanism for simultaneous token generation. We instantiate SETRec on T5 and Qwen (from 1.5B to 7B). Extensive experiments demonstrate its effectiveness under various scenarios (e.g., full ranking, warm- and cold-start ranking, and various item popularity groups). Moreover, results validate SETRec's superior efficiency and show promising scalability on cold-start items as model sizes increase.

Generative Recommendation (GR) has emerged as a transformative paradigm that reformulates the traditional cascade ranking system into a sequence-to-item generation task, facilitated by the use of discrete Semantic IDs (SIDs). However, current SIDs are suboptimal as the indexing objectives (Stage 1) are misaligned with the actual recommendation goals (Stage 2). Since these identifiers remain static (Stage 2), the backbone model lacks the flexibility to adapt them to the evolving complexities of user interactions. Furthermore, the prevailing strategy of flattening hierarchical SIDs into token sequences leads to sequence length inflation, resulting in prohibitive computational overhead and inference latency. To address these challenges, we propose IntRR, a novel framework that integrates objective-aligned SID Redistribution and structural Length Reduction. By leveraging item-specific Unique IDs (UIDs) as collaborative anchors, this approach dynamically redistributes semantic weights across hierarchical codebook layers. Concurrently, IntRR handles the SID hierarchy recursively, eliminating the need to flatten sequences. This ensures a fixed cost of one token per item. Extensive experiments on benchmark datasets demonstrate that IntRR yields substantial improvements over representative generative baselines, achieving superior performance in both recommendation accuracy and efficiency.

Despite its simplicity and efficacy, the high token expenditure of self-consistency can limit its practical utility. Here we investigate if self-consistency can be made more token-efficient for long chain-of-thought reasoning tasks, while preserving its parallelism, through early hypothesis pruning. Concretely, we generate all solutions in parallel, but periodically prune intermediate hypotheses that are deemed unnecessary based on two lightweight indicators: (a) the model's own confidence in individual hypotheses, and (b) lexical coverage of all current hypotheses by candidate subsets that are under consideration for continued retention. We design a fast weighted set cover algorithm that utilizes the two indicators; our evaluation of five LLMs on three math benchmarks shows that this method can improve token efficiency for all models, by 10-35% in many cases.

The use of continuous instead of discrete tokens during the Chain-of-Thought (CoT) phase of reasoning LLMs has garnered attention recently, based on the intuition that a continuous mixture of discrete tokens could simulate a superposition of several reasoning paths simultaneously. Theoretical results have formally proven that continuous tokens have much greater expressivity and can solve specific problems more efficiently. However, practical use of continuous tokens has been limited by strong training difficulties: previous works either just use continuous tokens at inference time on a pre-trained discrete-token model, or must distill the continuous CoT from ground-truth discrete CoTs and face computational costs that limit the CoT to very few tokens. This is the first work introducing a scalable method to learn continuous CoTs via reinforcement learning (RL), without distilling from reference discrete CoTs. We use "soft" tokens: mixtures of tokens together with noise on the input embedding to provide RL exploration. Computational overhead is minimal, enabling us to learn continuous CoTs with hundreds of tokens. On math reasoning benchmarks with Llama and Qwen models up to 8B, training with continuous CoTs match discrete-token CoTs for pass@1 and surpass them for pass@32, showing greater CoT diversity. In systematic comparisons, the best-performing scenario is to train with continuous CoT tokens then use discrete tokens for inference, meaning the "soft" models can be deployed in a standard way. Finally, we show continuous CoT RL training better preserves the predictions of the base model on out-of-domain tasks, thus providing a softer touch to the base model.

One of the most striking findings in modern research on large language models (LLMs) is that scaling up compute during training leads to better results. However, less attention has been given to the benefits of scaling compute during inference. This survey focuses on these inference-time approaches. We explore three areas under a unified mathematical formalism: token-level generation algorithms, meta-generation algorithms, and efficient generation. Token-level generation algorithms, often called decoding algorithms, operate by sampling a single token at a time or constructing a token-level search space and then selecting an output. These methods typically assume access to a language model's logits, next-token distributions, or probability scores. Meta-generation algorithms work on partial or full sequences, incorporating domain knowledge, enabling backtracking, and integrating external information. Efficient generation methods aim to reduce token costs and improve the speed of generation. Our survey unifies perspectives from three research communities: traditional natural language processing, modern LLMs, and machine learning systems.

Layer fusion techniques are critical to improving the inference efficiency of deep neural networks (DNN) for deployment. Fusion aims to lower inference costs by reducing data transactions between an accelerator's on-chip buffer and DRAM. This is accomplished by grouped execution of multiple operations like convolution and activations together into single execution units - fusion groups. However, on-chip buffer capacity limits fusion group size and optimizing fusion on whole DNNs requires partitioning into multiple fusion groups. Finding the optimal groups is a complex problem where the presence of invalid solutions hampers traditional search algorithms and demands robust approaches. In this paper we incorporate Explainable AI, specifically Graph Explanation Techniques (GET), into layer fusion. Given an invalid fusion group, we identify the operations most responsible for group invalidity, then use this knowledge to recursively split the original fusion group via a greedy tree-based algorithm to minimize DRAM access. We pair our scheme with common algorithms and optimize DNNs on two types of layer fusion: Line-Buffer Depth First (LBDF) and Branch Requirement Reduction (BRR). Experiments demonstrate the efficacy of our scheme on several popular and classical convolutional neural networks like ResNets and MobileNets. Our scheme achieves over 20% DRAM Access reduction on EfficientNet-B3.

We unify the discrete Fourier transform (DFT), discrete cosine transform (DCT), Walsh-Hadamard, Haar wavelet, Karhunen-Loève transform, and several others along with their continuous counterparts (Fourier transform, Fourier series, spherical harmonics, fractional Fourier transform) under one representation-theoretic principle: each is the eigenbasis of every covariance invariant under a specific finite or compact group, with columns constructed from the irreducible matrix elements of the group via the Peter-Weyl theorem. The unification rests on the Algebraic Diversity (AD) framework, which identifies the matched group of a covariance as the foundational object of second-order signal processing. The data-dependent KLT emerges as the trivial-matched-group limit; classical transforms emerge as the cyclic, dihedral, elementary abelian, iterated wreath, and hybrid wreath cases. Composition rules cover direct, wreath, and semidirect products. The Reed-Muller and arithmetic transforms appear as related change-of-basis transforms on the matched group of Walsh-Hadamard. A polynomial-time algorithm for matched-group discovery, the DAD-CAD relaxation cast as a generalized eigenvalue problem in double-commutator form, closes the operational loop: the matched group of any empirical covariance is discovered without expert judgment, with noise-aware variants via the commutativity residual δ and algebraic coloring index α for finite-SNR settings. The fractional Fourier transform is treated as the metaplectic SO(2) case with Hermite-Gauss matched basis, and a structural principle relates matched group size inversely to transform resolution. Modern applications (massive-MIMO, graph neural networks, transformer attention, point cloud and 3D vision, brain connectivity, single-cell genomics, quantum informatics) are sketched with their matched groups.

On-policy distillation (OPD) is appealing for large language model (LLM) post-training because it evaluates teacher feedback on student-generated rollouts rather than fixed teacher traces. In long-horizon settings, however, the common sampled-token variant is fragile: it reduces distribution matching to a one-token signal and becomes increasingly unreliable as rollouts drift away from prefixes the teacher commonly visits. We revisit OPD from the estimator and implementation sides. Theoretically, token-level OPD is biased relative to sequence-level reverse-KL, but it has a much tighter worst-case variance bound; our toy study shows the same tradeoff empirically, with stronger future-reward coupling producing higher gradient variance and less stable learning. Empirically, we identify three failure modes of sampled-token OPD: an imbalanced one-token signal, unreliable teacher guidance on student-generated prefixes, and distortions caused by tokenizer or special-token mismatch. We address these issues with teacher top-K local support matching, implemented as truncated reverse-KL with top-p rollout sampling and special-token masking. Across single-task math reasoning and multi-task agentic-plus-math training, this objective yields more stable optimization and better downstream performance than sampled-token OPD.

Providers of LLM-as-a-service have predominantly adopted a simple pricing model: users pay a fixed price per token. Consequently, one may think that the price two different users would pay for the same output string under the same input prompt is the same. In our work, we show that, surprisingly, this is not (always) true. We find empirical evidence that, particularly for non-english outputs, both proprietary and open-weights LLMs often generate the same (output) string with multiple different tokenizations, even under the same input prompt, and this in turn leads to arbitrary price variation. To address the problem of tokenization multiplicity, we introduce canonical generation, a type of constrained generation that restricts LLMs to only generate canonical tokenizations -- the unique tokenization in which each string is tokenized during the training process of an LLM. Further, we introduce an efficient sampling algorithm for canonical generation based on the Gumbel-Max trick. Experiments on a variety of natural language tasks demonstrate that our sampling algorithm for canonical generation is comparable to standard sampling in terms of performance and runtime, and it solves the problem of tokenization multiplicity.

Recent advancements, such as Group Relative Policy Optimization (GRPO), have enhanced the reasoning capabilities of large language models by optimizing the arithmetic mean of token-level rewards. However, GRPO suffers from unstable policy updates when processing tokens with outlier importance-weighted rewards, which manifests as extreme importance sampling ratios during training, i.e., the ratio between the sampling probabilities assigned to a token by the current and old policies. In this work, we propose Geometric-Mean Policy Optimization (GMPO), a stabilized variant of GRPO. Instead of optimizing the arithmetic mean, GMPO maximizes the geometric mean of token-level rewards, which is inherently less sensitive to outliers and maintains a more stable range of importance sampling ratio. In addition, we provide comprehensive theoretical and experimental analysis to justify the design and stability benefits of GMPO. Beyond improved stability, GMPO-7B outperforms GRPO by an average of 4.1% on multiple mathematical benchmarks and 1.4% on multimodal reasoning benchmark, including AIME24, AMC, MATH500, OlympiadBench, Minerva, and Geometry3K. Code is available at https://github.com/callsys/GMPO.

Scaling up test-time compute, by generating multiple independent solutions and selecting or aggregating among them, has become a central paradigm for improving large language models (LLMs) on challenging reasoning tasks. While most prior work relies on simple majority voting or reward model ranking to aggregate solutions, these approaches may only yield limited benefits. In this work, we propose to learn aggregation as an explicit reasoning skill: given a set of candidate solutions, we train an aggregator model to review, reconcile, and synthesize a final, correct answer using reinforcement learning from verifiable rewards. A key ingredient is careful balancing of easy and hard training examples, allowing the model to learn both to recover minority-but-correct answers as well as easy majority-correct answers. Empirically, we find our method, AggLM, outperforms both strong rule-based and reward-model baselines, across multiple benchmarks. Furthermore, it generalizes effectively to solutions from differing models, including stronger ones than contained in the training data, all while requiring substantially fewer tokens than majority voting with larger numbers of solutions.

Reinforcement Learning has emerged as the fundamental technique for enhancing reasoning in LLMs. However, existing algorithms apply uniform optimization to all tokens, ignoring their different roles in reasoning process. To address this limitation, we introduce Heterogeneous Adaptive Policy Optimization (HAPO), a comprehensive token-aware algorithm that dynamically adapts optimization based on token entropy. For rollout sampling, we propose Adaptive Temperature Sampling, which adjusts sampling temperature in real time, promoting exploration at high-entropy tokens while preserving coherence at low-entropy ones. For advantage calculation, we introduce Token Level Group Average that normalizes advantages at token level, jointly accounting for sequence-length as in token-mean loss while preserving non-biased treatment. We then develop Differential Advantage Redistribution that leverages entropy and importance ratios to modulate rewards-adjusting updates for tokens with clear signals. For clipping loss, we design Asymmetric Adaptive Clipping, allowing aggressive probability reduction for noisy low-entropy tokens while enabling exploration for high-entropy tokens. Through systematic investigation between entropy and training dynamics, we embedded token-level treatment into every stages to achieve fine-grained control. Extensive experiments demonstrate that HAPO consistently outperforms DAPO across multiple model scales. Our code can be found in https://github.com/starriver030515/HAPO.

While reinforcement learning methods such as Group Relative Preference Optimization (GRPO) have significantly enhanced Large Language Models, adapting them to diffusion models remains challenging. In particular, GRPO demands a stochastic policy, yet the most cost-effective diffusion samplers are based on deterministic ODEs. Recent work addresses this issue by using inefficient SDE-based samplers to induce stochasticity, but this reliance on model-agnostic Gaussian noise leads to slow convergence. To resolve this conflict, we propose Direct Group Preference Optimization (DGPO), a new online RL algorithm that dispenses with the policy-gradient framework entirely. DGPO learns directly from group-level preferences, which utilize relative information of samples within groups. This design eliminates the need for inefficient stochastic policies, unlocking the use of efficient deterministic ODE samplers and faster training. Extensive results show that DGPO trains around 20 times faster than existing state-of-the-art methods and achieves superior performance on both in-domain and out-of-domain reward metrics. Code is available at https://github.com/Luo-Yihong/DGPO.

Diffusion Transformer (DiT), an emerging diffusion model for visual generation, has demonstrated superior performance but suffers from substantial computational costs. Our investigations reveal that these costs primarily stem from the static inference paradigm, which inevitably introduces redundant computation in certain diffusion timesteps and spatial regions. To overcome this inefficiency, we propose Dynamic Diffusion Transformer (DyDiT), an architecture that dynamically adjusts its computation along both timestep and spatial dimensions. Specifically, we introduce a Timestep-wise Dynamic Width (TDW) approach that adapts model width conditioned on the generation timesteps. In addition, we design a Spatial-wise Dynamic Token (SDT) strategy to avoid redundant computation at unnecessary spatial locations. TDW and SDT can be seamlessly integrated into DiT and significantly accelerates the generation process. Building on these designs, we further enhance DyDiT in three key aspects. First, DyDiT is integrated seamlessly with flow matching-based generation, enhancing its versatility. Furthermore, we enhance DyDiT to tackle more complex visual generation tasks, including video generation and text-to-image generation, thereby broadening its real-world applications. Finally, to address the high cost of full fine-tuning and democratize technology access, we investigate the feasibility of training DyDiT in a parameter-efficient manner and introduce timestep-based dynamic LoRA (TD-LoRA). Extensive experiments on diverse visual generation models, including DiT, SiT, Latte, and FLUX, demonstrate the effectiveness of DyDiT.

We present DPBench, a benchmark for evaluating coordination in multi-agent systems built from large language models. Existing benchmarks measure task-level success under a fixed protocol; the structural conditions under which coordination succeeds or fails at all have not been characterised. DPBench adapts the Dining Philosophers problem into a controlled testbed where the action protocol, the communication structure, and the group size each vary independently. We evaluate six agents: GPT-5.2, Claude Opus 4.5, Grok 4.1, Gemini 2.5 Flash, Llama 4 Maverick, and a uniform-random baseline. Under simultaneous action at N=5 with the default prompt, deadlock ranges from 25.0% (95% Wilson CI [11.2, 46.9]) for GPT-5.2 to 90.0% [74.4, 96.5] for Gemini 2.5 Flash; sequential action is solved by four of the six. Holding the model fixed at Gemini 2.5 Flash, three protocol variables drive deadlock from 90% to within CI of zero: three rounds of pre-commitment communication (0.0% vs. single-round 86.7%), a prompt encoding a classical concurrency primitive (0.0% for resource-ordering and symmetry-breaking, against 100% for the minimal prompt), or doubling the group from N=5 to N=10 (90.0% to 10.0%). Single-round messaging and memory of past timesteps do not change the rate at the sample size we ran. Whether the same model coordinates or deadlocks is determined by the protocol, not by the model's capability.

Tokenization, the division of input text into input tokens, is an often overlooked aspect of the large language model (LLM) pipeline and could be the source of useful or harmful inductive biases. Historically, LLMs have relied on byte pair encoding, without care to specific input domains. With the increased use of LLMs for reasoning, various number-specific tokenization schemes have been adopted, with popular models like LLaMa and PaLM opting for single-digit tokenization while GPT-3.5 and GPT-4 have separate tokens for each 1-, 2-, and 3-digit numbers. In this work, we study the effect this choice has on numerical reasoning through the use of arithmetic tasks. We consider left-to-right and right-to-left tokenization for GPT-3.5 and -4, finding that right-to-left tokenization (enforced by comma separating numbers at inference time) leads to largely improved performance. Furthermore, we find that model errors when using standard left-to-right tokenization follow stereotyped error patterns, suggesting that model computations are systematic rather than approximate. We show that the model is able to convert between tokenizations easily, thus allowing chain-of-thought-inspired approaches to recover performance on left-to-right tokenized inputs. We also find the gap between tokenization directions decreases when models are scaled, possibly indicating that larger models are better able to override this tokenization-dependent inductive bias. In summary, our work performs the first study of how number tokenization choices lead to differences in model performance on arithmetic tasks, accompanied by a thorough analysis of error patterns. We hope this work inspires practitioners to more carefully ablate number tokenization-related choices when working towards general models of numerical reasoning.

Reinforcement learning from verifiable rewards (RLVR) has emerged as a central technique for improving the reasoning capabilities of large language models. Despite its effectiveness, how response-level rewards translate into token-level probability changes remains poorly understood. We introduce a discriminator view of RLVR updates, showing that the policy-gradient update direction implicitly acts as a linear discriminator over token-gradient vectors and thereby determines which token probabilities are increased or decreased during learning. Under standard sequence-level RLVR, this discriminator is constructed from positive- and negative-side centroids formed by advantage-weighted averaging of token-gradient vectors. However, such centroid construction can be dominated by shared high-frequency patterns, such as formatting tokens, diluting sparse yet discriminative directions that better distinguish high-reward responses from low-reward ones. To address this limitation, we propose DelTA, a discriminative token credit assignment method that estimates token coefficients to amplify side-specific token-gradient directions and downweight shared or weakly discriminative ones. These coefficients reweight a self-normalized RLVR surrogate, making the effective side-wise centroids more contrastive and thereby reshaping the RLVR update direction. On seven mathematical benchmarks, DelTA outperforms the strongest same-scale baselines by 3.26 and 2.62 average points on Qwen3-8B-Base and Qwen3-14B-Base, respectively. Additional results on code generation, a different backbone, and out-of-domain evaluations further demonstrate the generalization ability of DelTA.

Recent advances in large language models (LLMs) have demonstrated the power of reasoning through self-generated chains of thought. Multiple reasoning agents can collaborate to raise joint reasoning quality above individual outcomes. However, such agents typically interact in a turn-based manner, trading increased latency for improved quality. In this paper, we propose Group Think--a single LLM that acts as multiple concurrent reasoning agents, or thinkers. With shared visibility into each other's partial generation progress, Group Think introduces a new concurrent-reasoning paradigm in which multiple reasoning trajectories adapt dynamically to one another at the token level. For example, a reasoning thread may shift its generation mid-sentence upon detecting that another thread is better positioned to continue. This fine-grained, token-level collaboration enables Group Think to reduce redundant reasoning and improve quality while achieving significantly lower latency. Moreover, its concurrent nature allows for efficient utilization of idle computational resources, making it especially suitable for edge inference, where very small batch size often underutilizes local~GPUs. We give a simple and generalizable modification that enables any existing LLM to perform Group Think on a local GPU. We also present an evaluation strategy to benchmark reasoning latency and empirically demonstrate latency improvements using open-source LLMs that were not explicitly trained for Group Think. We hope this work paves the way for future LLMs to exhibit more sophisticated and more efficient collaborative behavior for higher quality generation.

Token attribution methods provide intuitive explanations for language model outputs by identifying causally important input tokens. However, as modern LLMs increasingly rely on extended reasoning chains, existing schemes face two critical challenges: (1) efficiency bottleneck, where attributing a target span of M tokens within a context of length N requires O(M*N) operations, making long-context attribution prohibitively slow; and (2) faithfulness drop, where intermediate reasoning tokens absorb attribution mass, preventing importance from propagating back to the original input. To address these, we introduce FlashTrace, an efficient multi-token attribution method that employs span-wise aggregation to compute attribution over multi-token targets in a single pass, while maintaining faithfulness. Moreover, we design a recursive attribution mechanism that traces importance through intermediate reasoning chains back to source inputs. Extensive experiments on long-context retrieval (RULER) and multi-step reasoning (MATH, MorehopQA) tasks demonstrate that FlashTrace achieves over 130x speedup over existing baselines while maintaining superior faithfulness. We further analyze the dynamics of recursive attribution, showing that even a single recursive hop improves faithfulness by tracing importance through the reasoning chain.

Diffusion Language Models (DLMs) offer order-agnostic generation that can explore many possible decoding trajectories. However, current decoding methods commit to a single trajectory, limiting exploration in trajectory space. We introduce Order-Token Search to explore this space through jointly searching over generation order and token values. Its core is a likelihood estimator that scores denoising actions, enabling stable pruning and efficient exploration of diverse trajectories. Across mathematical reasoning and coding benchmarks, Order-Token Search consistently outperforms baselines on GSM8K, MATH500, Countdown, and HumanEval (3.1%, 3.8%, 7.9%, and 6.8% absolute over backbone), matching or surpassing diffu-GRPO post-trained d1-LLaDA. Our work establishes joint search as a key component for advancing decoding in DLMs.

Transformer-based language models spread FLOPs uniformly across input sequences. In this work we demonstrate that transformers can instead learn to dynamically allocate FLOPs (or compute) to specific positions in a sequence, optimising the allocation along the sequence for different layers across the model depth. Our method enforces a total compute budget by capping the number of tokens (k) that can participate in the self-attention and MLP computations at a given layer. The tokens to be processed are determined by the network using a top-k routing mechanism. Since k is defined a priori, this simple procedure uses a static computation graph with known tensor sizes, unlike other conditional computation techniques. Nevertheless, since the identities of the k tokens are fluid, this method can expend FLOPs non-uniformly across the time and model depth dimensions. Thus, compute expenditure is entirely predictable in sum total, but dynamic and context-sensitive at the token-level. Not only do models trained in this way learn to dynamically allocate compute, they do so efficiently. These models match baseline performance for equivalent FLOPS and wall-clock times to train, but require a fraction of the FLOPs per forward pass, and can be upwards of 50\% faster to step during post-training sampling.

Classifier-free guidance (CFG) has become an essential component of modern diffusion models to enhance both generation quality and alignment with input conditions. However, CFG requires specific training procedures and is limited to conditional generation. To address these limitations, we propose Token Perturbation Guidance (TPG), a novel method that applies perturbation matrices directly to intermediate token representations within the diffusion network. TPG employs a norm-preserving shuffling operation to provide effective and stable guidance signals that improve generation quality without architectural changes. As a result, TPG is training-free and agnostic to input conditions, making it readily applicable to both conditional and unconditional generation. We further analyze the guidance term provided by TPG and show that its effect on sampling more closely resembles CFG compared to existing training-free guidance techniques. Extensive experiments on SDXL and Stable Diffusion 2.1 show that TPG achieves nearly a 2times improvement in FID for unconditional generation over the SDXL baseline, while closely matching CFG in prompt alignment. These results establish TPG as a general, condition-agnostic guidance method that brings CFG-like benefits to a broader class of diffusion models. The code is available at https://github.com/TaatiTeam/Token-Perturbation-Guidance

A common architectural choice for deep metric learning is a convolutional neural network followed by global average pooling (GAP). Albeit simple, GAP is a highly effective way to aggregate information. One possible explanation for the effectiveness of GAP is considering each feature vector as representing a different semantic entity and GAP as a convex combination of them. Following this perspective, we generalize GAP and propose a learnable generalized sum pooling method (GSP). GSP improves GAP with two distinct abilities: i) the ability to choose a subset of semantic entities, effectively learning to ignore nuisance information, and ii) learning the weights corresponding to the importance of each entity. Formally, we propose an entropy-smoothed optimal transport problem and show that it is a strict generalization of GAP, i.e., a specific realization of the problem gives back GAP. We show that this optimization problem enjoys analytical gradients enabling us to use it as a direct learnable replacement for GAP. We further propose a zero-shot loss to ease the learning of GSP. We show the effectiveness of our method with extensive evaluations on 4 popular metric learning benchmarks. Code is available at: GSP-DML Framework

Though Large Language Models (LLMs) have shown remarkable abilities in mathematics reasoning, they are still struggling with performing numeric operations accurately, such as addition and multiplication. Numbers can be tokenized into tokens in various ways by different LLMs and affect the numeric operations performance. Currently, there are two representatives: 1) Tokenize into 1-digit, and 2) Tokenize into 1sim 3 digit. The difference is roughly equivalent to using different numeral systems (namely base 10 or base 10^{3}). In light of this, we study the scaling behavior of different numeral systems in the context of transformer-based large language models. We empirically show that a base 10 system is consistently more data-efficient than a base 10^{2} or 10^{3} system across training data scale, model sizes under from-scratch training settings, while different number systems have very similar fine-tuning performances. We attribute this to higher token frequencies of a base 10 system. Additionally, we reveal extrapolation behavior patterns on addition and multiplication. We identify that base 100 and base 1000 systems struggle on token-level discernment and token-level operations. We also sheds light on the mechanism learnt by the models.

Large Language Models (LLMs) achieve impressive reasoning capabilities at the cost of substantial inference overhead, posing substantial deployment challenges. Although distilled Small Language Models (SLMs) significantly enhance efficiency, their performance suffers as they fail to follow LLMs' reasoning paths. Luckily, we reveal that only a small fraction of tokens genuinely diverge reasoning paths between LLMs and SLMs. Most generated tokens are either identical or exhibit neutral differences, such as minor variations in abbreviations or expressions. Leveraging this insight, we introduce **Roads to Rome (R2R)**, a neural token routing method that selectively utilizes LLMs only for these critical, path-divergent tokens, while leaving the majority of token generation to the SLM. We also develop an automatic data generation pipeline that identifies divergent tokens and generates token-level routing labels to train the lightweight router. We apply R2R to combine R1-1.5B and R1-32B models from the DeepSeek family, and evaluate on challenging math, coding, and QA benchmarks. With an average activated parameter size of 5.6B, R2R surpasses the average accuracy of R1-7B by 1.6x, outperforming even the R1-14B model. Compared to R1-32B, it delivers a 2.8x wall-clock speedup with comparable performance, advancing the Pareto frontier of test-time scaling efficiency. Our code is available at https://github.com/thu-nics/R2R.

Test-time scaling has emerged as an effective approach for improving language model performance by utilizing additional compute at inference time. Recent studies have shown that overriding end-of-thinking tokens (e.g., replacing "</think>" with "Wait") can extend reasoning steps and improve accuracy. In this work, we explore whether a dedicated continue-thinking token can be learned to trigger extended reasoning. We augment a distilled version of DeepSeek-R1 with a single learned "<|continue-thinking|>" token, training only its embedding via reinforcement learning while keeping the model weights frozen. Our experiments show that this learned token achieves improved accuracy on standard math benchmarks compared to both the baseline model and a test-time scaling approach that uses a fixed token (e.g., "Wait") for budget forcing. In particular, we observe that in cases where the fixed-token approach enhances the base model's accuracy, our method achieves a markedly greater improvement. For example, on the GSM8K benchmark, the fixed-token approach yields a 1.3% absolute improvement in accuracy, whereas our learned-token method achieves a 4.2% improvement over the base model that does not use budget forcing.

We consider multi-draft speculative sampling, where the proposal sequences are sampled independently from different draft models. At each step, a token-level draft selection scheme takes a list of valid tokens as input and produces an output token whose distribution matches that of the target model. Previous works have demonstrated that the optimal scheme (which maximizes the probability of accepting one of the input tokens) can be cast as a solution to a linear program. In this work we show that the optimal scheme can be decomposed into a two-step solution: in the first step an importance sampling (IS) type scheme is used to select one intermediate token; in the second step (single-draft) speculative sampling is applied to generate the output token. For the case of two identical draft models we further 1) establish a necessary and sufficient condition on the distributions of the target and draft models for the acceptance probability to equal one and 2) provide an explicit expression for the optimal acceptance probability. Our theoretical analysis also motives a new class of token-level selection scheme based on weighted importance sampling. Our experimental results demonstrate consistent improvements in the achievable block efficiency and token rates over baseline schemes in a number of scenarios.

The development of Multi-modal Large Language Models (MLLMs) enhances Large Language Models (LLMs) with the ability to perceive data formats beyond text, significantly advancing a range of downstream applications, such as visual question answering and image captioning. However, the substantial computational costs associated with processing high-resolution images and videos pose a barrier to their broader adoption. To address this challenge, compressing vision tokens in MLLMs has emerged as a promising approach to reduce inference costs. While existing methods conduct token reduction in the feature alignment phase. In this paper, we introduce VisToG, a novel grouping mechanism that leverages the capabilities of pre-trained vision encoders to group similar image segments without the need for segmentation masks. Specifically, we concatenate semantic tokens to represent image semantic segments after the linear projection layer before feeding into the vision encoder. Besides, with the isolated attention we adopt, VisToG can identify and eliminate redundant visual tokens utilizing the prior knowledge in the pre-trained vision encoder, which effectively reduces computational demands. Extensive experiments demonstrate the effectiveness of VisToG, maintaining 98.1% of the original performance while achieving a reduction of over 27\% inference time.

Neural networks are known to produce poor uncertainty estimations, and a variety of approaches have been proposed to remedy this issue. This includes deep ensemble, a simple and effective method that achieves state-of-the-art results for uncertainty-aware learning tasks. In this work, we explore a combinatorial generalization of deep ensemble called deep combinatorial aggregation (DCA). DCA creates multiple instances of network components and aggregates their combinations to produce diversified model proposals and predictions. DCA components can be defined at different levels of granularity. And we discovered that coarse-grain DCAs can outperform deep ensemble for uncertainty-aware learning both in terms of predictive performance and uncertainty estimation. For fine-grain DCAs, we discover that an average parameterization approach named deep combinatorial weight averaging (DCWA) can improve the baseline training. It is on par with stochastic weight averaging (SWA) but does not require any custom training schedule or adaptation of BatchNorm layers. Furthermore, we propose a consistency enforcing loss that helps the training of DCWA and modelwise DCA. We experiment on in-domain, distributional shift, and out-of-distribution image classification tasks, and empirically confirm the effectiveness of DCWA and DCA approaches.

Recent advances in group-based reinforcement learning (RL) have driven frontier large language models (LLMs) in single-turn tasks like mathematical reasoning. However, their scalability to long-horizon LLM agent training remains limited. Unlike static tasks, agent-environment interactions unfold over many steps and often yield sparse or delayed rewards, making credit assignment across individual steps significantly more challenging. In this work, we propose Group-in-Group Policy Optimization (GiGPO), a novel RL algorithm that achieves fine-grained credit assignment for LLM agents while preserving the appealing properties of group-based RL: critic-free, low memory, and stable convergence. GiGPO introduces a two-level structure for estimating relative advantage: (i) At the episode-level, GiGPO computes macro relative advantages based on groups of complete trajectories; (ii) At the step-level, GiGPO introduces an anchor state grouping mechanism that retroactively constructs step-level groups by identifying repeated environment states across trajectories. Actions stemming from the same state are grouped together, enabling micro relative advantage estimation. This hierarchical structure effectively captures both global trajectory quality and local step effectiveness without relying on auxiliary models or additional rollouts. We evaluate GiGPO on two challenging agent benchmarks, ALFWorld and WebShop, using Qwen2.5-1.5B-Instruct and Qwen2.5-7B-Instruct. Crucially, GiGPO delivers fine-grained per-step credit signals and achieves performance gains of > 12\% on ALFWorld and > 9\% on WebShop over the GRPO baseline: all while maintaining the same GPU memory overhead, identical LLM rollout, and incurring little to no additional time cost.

Grouping and recognition are important components of visual scene understanding, e.g., for object detection and semantic segmentation. With end-to-end deep learning systems, grouping of image regions usually happens implicitly via top-down supervision from pixel-level recognition labels. Instead, in this paper, we propose to bring back the grouping mechanism into deep networks, which allows semantic segments to emerge automatically with only text supervision. We propose a hierarchical Grouping Vision Transformer (GroupViT), which goes beyond the regular grid structure representation and learns to group image regions into progressively larger arbitrary-shaped segments. We train GroupViT jointly with a text encoder on a large-scale image-text dataset via contrastive losses. With only text supervision and without any pixel-level annotations, GroupViT learns to group together semantic regions and successfully transfers to the task of semantic segmentation in a zero-shot manner, i.e., without any further fine-tuning. It achieves a zero-shot accuracy of 52.3% mIoU on the PASCAL VOC 2012 and 22.4% mIoU on PASCAL Context datasets, and performs competitively to state-of-the-art transfer-learning methods requiring greater levels of supervision. We open-source our code at https://github.com/NVlabs/GroupViT .

Human visual recognition system shows astonishing capability of compressing visual information into a set of tokens containing rich representations without label supervision. One critical driving principle behind it is perceptual grouping. Despite being widely used in computer vision in the early 2010s, it remains a mystery whether perceptual grouping can be leveraged to derive a neural visual recognition backbone that generates as powerful representations. In this paper, we propose the Perceptual Group Tokenizer, a model that entirely relies on grouping operations to extract visual features and perform self-supervised representation learning, where a series of grouping operations are used to iteratively hypothesize the context for pixels or superpixels to refine feature representations. We show that the proposed model can achieve competitive performance compared to state-of-the-art vision architectures, and inherits desirable properties including adaptive computation without re-training, and interpretability. Specifically, Perceptual Group Tokenizer achieves 80.3% on ImageNet-1K self-supervised learning benchmark with linear probe evaluation, marking a new progress under this paradigm.

Recent English Common Crawl datasets like FineWeb-Edu and DCLM achieved significant benchmark gains via aggressive model-based filtering, but at the cost of removing 90% of data. This limits their suitability for long token horizon training, such as 15T tokens for Llama 3.1. In this paper, we show how to achieve better trade-offs between accuracy and data quantity by a combination of classifier ensembling, synthetic data rephrasing, and reduced reliance on heuristic filters. When training 8B parameter models for 1T tokens, using a high-quality subset of our data improves MMLU by 5.6 over DCLM, demonstrating the efficacy of our methods for boosting accuracies over a relatively short token horizon. Furthermore, our full 6.3T token dataset matches DCLM on MMLU, but contains four times more unique real tokens than DCLM. This unlocks state-of-the-art training over a long token horizon: an 8B parameter model trained for 15T tokens, of which 7.2T came from our dataset, is better than the Llama 3.1 8B model: +5 on MMLU, +3.1 on ARC-Challenge, and +0.5 on average across ten diverse tasks. The dataset is available at https://data.commoncrawl.org/contrib/Nemotron/Nemotron-CC/index.html

With the development of large language models (LLMs), the ability to handle longer contexts has become a key capability for Web applications such as cross-document understanding and LLM-powered search systems. However, this progress faces two major challenges: performance degradation due to sequence lengths out-of-distribution, and excessively long inference times caused by the quadratic computational complexity of attention. These issues hinder the application of LLMs in long-context scenarios. In this paper, we propose Dynamic Token-Level KV Cache Selection (TokenSelect), a model-agnostic, training-free method for efficient and accurate long-context inference. TokenSelect builds upon the observation of non-contiguous attention sparsity, using Query-Key dot products to measure per-head KV Cache criticality at token-level. By per-head soft voting mechanism, TokenSelect selectively involves a small number of critical KV cache tokens in the attention calculation without sacrificing accuracy. To further accelerate TokenSelect, we designed the Selection Cache based on observations of consecutive Query similarity and implemented efficient dot product kernel, significantly reducing the overhead of token selection. A comprehensive evaluation of TokenSelect demonstrates up to 23.84x speedup in attention computation and up to 2.28x acceleration in end-to-end latency, while providing superior performance compared to state-of-the-art long-context inference methods.

Effective prompt design is essential for improving the planning capabilities of large language model (LLM)-driven agents. However, existing structured prompting strategies are typically limited to single-agent, plan-only settings, and often evaluate performance solely based on task accuracy - overlooking critical factors such as token efficiency, modularity, and scalability in multi-agent environments. To address these limitations, we introduce CodeAgents, a prompting framework that codifies multi-agent reasoning and enables structured, token-efficient planning in multi-agent systems. In CodeAgents, all components of agent interaction - Task, Plan, Feedback, system roles, and external tool invocations - are codified into modular pseudocode enriched with control structures (e.g., loops, conditionals), boolean logic, and typed variables. This design transforms loosely connected agent plans into cohesive, interpretable, and verifiable multi-agent reasoning programs. We evaluate the proposed framework across three diverse benchmarks - GAIA, HotpotQA, and VirtualHome - using a range of representative LLMs. Results show consistent improvements in planning performance, with absolute gains of 3-36 percentage points over natural language prompting baselines. On VirtualHome, our method achieves a new state-of-the-art success rate of 56%. In addition, our approach reduces input and output token usage by 55-87% and 41-70%, respectively, underscoring the importance of token-aware evaluation metrics in the development of scalable multi-agent LLM systems. The code and resources are available at: https://anonymous.4open.science/r/CodifyingAgent-5A86

LLMs have traditionally scaled along dense dimensions, where performance is coupled with near-linear increases in computational cost. While MoE decouples capacity from compute, it introduces large memory overhead and hardware efficiency challenges. To overcome these, we propose token-indexed parameters as a novel, orthogonal scaling axis that decouple model capacity from FLOPs. Specifically, we introduce Joint-Token (JTok) and Mixture of Joint-Token (JTok-M), which augment Transformer layers with modulation vectors retrieved from auxiliary embedding tables. These vectors modulate the backbone via lightweight, element-wise operations, incurring negligible FLOPs overhead. Extensive experiments on both dense and MoE backbones, spanning from 650M (190M + 460M embedding) to 61B (17B + 44B embedding) total parameters, demonstrate that our approach consistently reduces validation loss and significantly improves downstream task performance (e.g., +4.1 on MMLU, +8.3 on ARC, +8.9 on CEval). Rigorous isoFLOPs analysis further confirms that JTok-M fundamentally shifts the quality-compute Pareto frontier, achieving comparable model quality with 35% less compute relative to vanilla MoE architectures, and we validate that token-indexed parameters exhibit a predictable power-law scaling behavior. Moreover, our efficient implementation ensures that the overhead introduced by JTok and JTok-M remains marginal.

Time series forecasting plays a vital role in supporting decision-making across a wide range of critical applications, including energy, healthcare, and finance. Despite recent advances, forecasting accuracy remains limited due to the challenge of integrating historical numerical sequences with contextual features, which often comprise unstructured textual data. To address this challenge, we propose TokenCast, an LLM-driven framework that leverages language-based symbolic representations as a unified intermediary for context-aware time series forecasting. Specifically, TokenCast employs a discrete tokenizer to transform continuous numerical sequences into temporal tokens, enabling structural alignment with language-based inputs. To bridge the semantic gap between modalities, both temporal and contextual tokens are embedded into a shared representation space via a pre-trained large language model (LLM), further optimized with autoregressive generative objectives. Building upon this unified semantic space, the aligned LLM is subsequently fine-tuned in a supervised manner to predict future temporal tokens, which are then decoded back into the original numerical space. Extensive experiments on diverse real-world datasets enriched with contextual features demonstrate the effectiveness and generalizability of TokenCast.

The key-value (KV) cache is widely treated as essential state in transformer inference, and a large body of work engineers policies to compress, evict, or approximate its entries. We prove that this state is entirely redundant: keys and values at every layer are deterministic projections of the residual stream, and recomputing them from a single residual vector per token incurs exactly zero reconstruction error, not approximately, but bit-identically. We verify this across six models from four architecture families (135M to 4B parameters). Cross-task residual patching at every layer produces D_KL = 0 between patched and original output distributions, confirming that the residual stream satisfies a Markov property and is the sole information-carrying state. Removing the cache entirely and recomputing from scratch yields token-identical output under greedy decoding on all models tested. We build on this result with KV-Direct, a bounded-memory inference scheme that checkpoints residual vectors (5 KB per token on Gemma 3-4B) instead of full KV pairs (136 KB), recomputing keys and values on demand. Over 20 conversation turns, KV-Direct holds peak memory at 42 MB while the standard cache grows past 103 MB. Against five eviction baselines (H2O, StreamingLLM, SnapKV, TOVA, window-only), KV-Direct maintains 100% token match at every cache budget; all baselines degrade to 5-28%. A per-operation latency analysis shows recomputation runs up to 5x faster than reading cached tensors at moderate batch sizes. Code is available at https://github.com/Kaleemullahqasim/KV-Direct.

Recent breakthroughs in large language models (LLMs) have led to notable successes in complex reasoning tasks, such as mathematical problem solving. A common strategy for improving performance is parallel thinking, in which multiple reasoning traces are generated and the final prediction is made using aggregation schemes like majority voting or best-of-N decoding. However, two key challenges persist. First, multi-sample decoding incurs substantial inference latency, especially for long-form outputs. Second, effective mechanisms for reliably assessing the correctness of individual reasoning traces are still limited. To address these challenges, we introduce One-Token Verification (OTV), a computational method that estimates reasoning correctness in a single forward pass during generation. OTV is activated by a learnable token and integrated into the LLM via low-rank adaptation to probe internal reasoning signals through the key-value cache, supporting token-level correctness estimation at any stage of generation without disrupting primary reasoning. Experiments on mathematical reasoning benchmarks demonstrate that OTV consistently surpasses existing verifiers. Additionally, OTV reduces token usage by up to 90% through correctness-guided early termination, prioritizing shorter, more reliable solutions.

Chain-of-thoughts (CoT) requires large language models (LLMs) to generate intermediate steps before reaching the final answer, and has been proven effective to help LLMs solve complex reasoning tasks. However, the inner mechanism of CoT still remains largely unclear. In this paper, we empirically study the role of CoT tokens in LLMs on two compositional tasks: multi-digit multiplication and dynamic programming. While CoT is essential for solving these problems, we find that preserving only tokens that store intermediate results would achieve comparable performance. Furthermore, we observe that storing intermediate results in an alternative latent form will not affect model performance. We also randomly intervene some values in CoT, and notice that subsequent CoT tokens and the final answer would change correspondingly. These findings suggest that CoT tokens may function like variables in computer programs but with potential drawbacks like unintended shortcuts and computational complexity limits between tokens. The code and data are available at https://github.com/solitaryzero/CoTs_are_Variables.

Cross-tokenizer knowledge distillation allows a student model to learn from teachers with incompatible vocabularies. Prior work operates on hidden states or logits; the latter is preferred as a drop-in replacement requiring no auxiliary components. Logit-based methods either use only the correct-token probability, missing the full 'dark knowledge' in the teacher's distribution, or operate on the full output distribution, relying on strict token partitioning and/or unprincipled heuristic ranking. We identify two key shortcomings of full-distribution, logit-based methods: (i) an uncommon-token failure, where critical tokens fall into the unmatched subset (e.g., Llama's 1100 multi-digit numerals under digit-splitting Qwen supervision) and are suppressed during training, reducing GSM8k from 12.89 to 2.56 compared to same-tokenizer KD from a weaker teacher; and (ii) over-conservative matching, where strict 1-to-1 matching excludes near-equivalent tokens across surface forms. These failures require distinct remedies: eliminating the partition when critical tokens are misaligned, and refining it when alignment is reliable. We propose X-Token, an approach with two complementary loss formulations targeting these issues. P-KL removes partitioning and aligns the student's distribution with the teacher's via a sparse projection matrix W (initialized from tokenizer-level string rules) to address the uncommon-token failure. H-KL retains the hybrid form while relaxing matching to align each student token with its top-ranked teacher mapping under W. Both objectives share W and extend naturally to multiple teachers. Empirically, on Llama-3.2-1B, X-Token outperforms the current state of the art GOLD by +3.82 average points with a Qwen3-4B teacher and by +0.5 with a Phi-4-Mini teacher. Further, a two-teacher setup (Phi-4-mini + Llama-3B) improves over single-teacher distillation by +1.3 points.

Reinforcement Learning with Verifiable Rewards (RLVR) offers a promising framework for optimizing large language models in reasoning tasks. However, existing RLVR algorithms focus on different granularities, and each has complementary strengths and limitations. Group Relative Policy Optimization (GRPO) updates the policy with token-level importance ratios, which preserves fine-grained credit assignment but often suffers from high variance and instability. In contrast, Group Sequence Policy Optimization (GSPO) applies single sequence-level importance ratios across all tokens in a response that better matches sequence-level rewards, but sacrifices token-wise credit assignment. In this paper, we propose Dynamic Hybrid Policy Optimization (DHPO) to bridge GRPO and GSPO within a single clipped surrogate objective. DHPO combines token-level and sequence-level importance ratios using weighting mechanisms. We explore two variants of the mixing mechanism, including an averaged mixing and an entropy-guided mixing. To further stabilize training, we employ a branch-specific clipping strategy that constrains token-level and sequence-level ratios within separate trust regions before mixing, preventing outliers in either branch from dominating the update. Across seven challenging mathematical reasoning benchmarks, experiments on both dense and MoE models from the Qwen3 series show that DHPO consistently outperforms GRPO and GSPO. We will release our code upon acceptance of this paper.

Despite the recent success in many applications, the high computational requirements of vision transformers limit their use in resource-constrained settings. While many existing methods improve the quadratic complexity of attention, in most vision transformers, self-attention is not the major computation bottleneck, e.g., more than 80% of the computation is spent on fully-connected layers. To improve the computational complexity of all layers, we propose a novel token downsampling method, called Token Pooling, efficiently exploiting redundancies in the images and intermediate token representations. We show that, under mild assumptions, softmax-attention acts as a high-dimensional low-pass (smoothing) filter. Thus, its output contains redundancy that can be pruned to achieve a better trade-off between the computational cost and accuracy. Our new technique accurately approximates a set of tokens by minimizing the reconstruction error caused by downsampling. We solve this optimization problem via cost-efficient clustering. We rigorously analyze and compare to prior downsampling methods. Our experiments show that Token Pooling significantly improves the cost-accuracy trade-off over the state-of-the-art downsampling. Token Pooling is a simple and effective operator that can benefit many architectures. Applied to DeiT, it achieves the same ImageNet top-1 accuracy using 42% fewer computations.

Large Multimodal Models (LMMs) have become a pivotal research focus in deep learning, demonstrating remarkable capabilities in 3D scene understanding. However, current 3D LMMs employing thousands of spatial tokens for multimodal reasoning suffer from critical inefficiencies: excessive computational overhead and redundant information flows. Unlike 2D VLMs processing single images, 3D LMMs exhibit inherent architectural redundancy due to the heterogeneous mechanisms between spatial tokens and visual tokens. To address this challenge, we propose AdaToken-3D, an adaptive spatial token optimization framework that dynamically prunes redundant tokens through spatial contribution analysis. Our method automatically tailors pruning strategies to different 3D LMM architectures by quantifying token-level information flows via attention pattern mining. Extensive experiments on LLaVA-3D (a 7B parameter 3D-LMM) demonstrate that AdaToken-3D achieves 21\% faster inference speed and 63\% FLOPs reduction while maintaining original task accuracy. Beyond efficiency gains, this work systematically investigates redundancy patterns in multimodal spatial information flows through quantitative token interaction analysis. Our findings reveal that over 60\% of spatial tokens contribute minimally (<5\%) to the final predictions, establishing theoretical foundations for efficient 3D multimodal learning.

In recent years, general visual foundation models (VFMs) have witnessed increasing adoption, particularly as image encoders for popular multi-modal large language models (MLLMs). However, without semantically fine-grained supervision, these models still encounter fundamental prediction errors in the context of downstream text-image-related tasks, i.e., perception, understanding and reasoning with images containing small and dense texts. To bridge this gap, we develop TokenOCR, the first token-level visual foundation model specifically tailored for text-image-related tasks, designed to support a variety of traditional downstream applications. To facilitate the pretraining of TokenOCR, we also devise a high-quality data production pipeline that constructs the first token-level image text dataset, TokenIT, comprising 20 million images and 1.8 billion token-mask pairs. Furthermore, leveraging this foundation with exceptional image-as-text capability, we seamlessly replace previous VFMs with TokenOCR to construct a document-level MLLM, TokenVL, for VQA-based document understanding tasks. Finally, extensive experiments demonstrate the effectiveness of TokenOCR and TokenVL. Code, datasets, and weights will be available at https://token-family.github.io/TokenOCR_project.

Group-advantage-based reinforcement learning methods, such as GRPO and DAPO, have demonstrated strong performance across diverse domains, including mathematical reasoning and text-to-image generation. However, their reliance on sample-level rewards introduces a key limitation as uniform credit assignment across all tokens fails to capture fine-grained, token-level contributions. To address this issue, we propose Guidance Contrastive Policy Optimization (GCPO), a novel algorithm that enables per-token credit assignment by contrasting model predictions under positive and negative prompts. Rather than uniformly broadcasting sample-level advantages, GCPO assigns token-level advantages proportional to the difference between these contrastive predictions, allowing more precise and informative learning signals. Empirically, we find that GCPO emphasizes semantically relevant regions such as visual areas aligned with textual prompts in text-to-image generation, and critical keywords within reasoning traces for chain-of-thought tasks. Through extensive experiments, GCPO consistently outperforms GRPO and DAPO baselines on both text-to-image generation and chain-of-thought reasoning benchmarks, demonstrating its effectiveness as a general and scalable optimization strategy for discrete policy learning.

Recent advancements in large language models (LLMs) have significantly enhanced their reasoning capabilities. However, they continue to struggle with basic character-level tasks, such as counting letters in words, a problem rooted in their tokenization process. While existing benchmarks have highlighted this weakness through basic character operations, such failures are often dismissed due to lacking practical relevance. Yet, many real-world applications, such as navigating text-based maps or interpreting structured tables, rely heavily on precise sub-token understanding. In this regard, we introduce SubTokenTest, a comprehensive benchmark that assesses sub-token understanding through practical, utility-driven tasks. Our benchmark includes ten tasks across four domains and isolates tokenization-related failures by decoupling performance from complex reasoning. We provide a comprehensive evaluation of nine advanced LLMs. Additionally, we investigate the impact of test-time scaling on sub-token reasoning and explore how character-level information is encoded within the hidden states.

Direct Preference Optimization (DPO) has emerged as a simple and effective method for aligning large language models. However, its reliance on a fixed temperature parameter leads to suboptimal training on diverse preference data, causing overfitting on easy examples and under-learning from informative ones. Recent methods have emerged to counter this. While IPO addresses general overfitting, its uniform regularization can be overly conservative. The more targeted approach of beta-DPO suffers from its own limitations: its batch-level adaptation applies a single, compromised temperature to mixed-margin pairs, its linear update rule can produce unstable negative beta values, and its filtering mechanism discards potentially useful training signals. In this work, we introduce Margin-Adaptive Direct Preference Optimization (MADPO), a method that provides a stable, data-preserving, and instance-level solution. MADPO employs a practical two-step approach: it first trains a reward model to estimate preference margins and then uses these margins to apply a continuous, adaptive weight to the DPO loss for each individual training sample. This re-weighting scheme creates an effective target margin that is amplified for hard pairs and dampened for easy pairs, allowing for granular control over the learning signal. We provide a comprehensive theoretical analysis, proving that MADPO has a well-behaved optimization landscape and is robust to reward model estimation errors. We validate our theory with experiments on a sentiment generation task, where MADPO consistently and significantly outperforms strong baselines across datasets of varying quality. It achieves performance gains of up to +33.3\% on High Quality data and +10.5\% on Low Quality data over the next-best method. Our results establish MADPO as a more robust and principled approach to preference alignment.

We propose a novel speculative decoding method tailored for multi-sample reasoning scenarios, such as self-consistency and Best-of-N sampling. Our method exploits the intrinsic consensus of parallel generation paths to synthesize high-quality draft tokens without requiring auxiliary models or external databases. By dynamically analyzing structural patterns across parallel reasoning paths through a probabilistic aggregation mechanism, it identifies consensus token sequences that align with the decoding distribution. Evaluations on mathematical reasoning benchmarks demonstrate a substantial improvement in draft acceptance rates over baselines, while reducing the latency in draft token construction. This work establishes a paradigm shift for efficient multi-sample inference, enabling seamless integration of speculative decoding with sampling-based reasoning techniques.

Multi-turn tool calling is challenging for Large Language Models (LLMs) because rewards are sparse and exploration is expensive. A common recipe, SFT followed by GRPO, can stall when within-group reward variation is low (e.g., more rollouts in a group receive the all 0 or all 1 reward), making the group-normalized advantage uninformative and yielding vanishing updates. To address this problem, we propose RC-GRPO (Reward-Conditioned Group Relative Policy Optimization), which treats exploration as a controllable steering problem via discrete reward tokens. We first fine-tune a Reward-Conditioned Trajectory Policy (RCTP) on mixed-quality trajectories with reward goal special tokens (e.g., <|high_reward|>, <|low_reward|>) injected into the prompts, enabling the model to learn how to generate distinct quality trajectories on demand. Then during RL, we sample diverse reward tokens within each GRPO group and condition rollouts on the sampled token to improve within-group diversity, improving advantage gains. On the Berkeley Function Calling Leaderboard v4 (BFCLv4) multi-turn benchmark, our method yields consistently improved performance than baselines, and the performance on Qwen-2.5-7B-Instruct even surpasses all closed-source API models.

Self-attention is central to Transformer performance and is often the most expensive part of the Transformer at long context lengths because its pairwise token interactions scale quadratically with sequence length. Standard dense attention also applies the same set of attention heads to every token regardless of token difficulty or information content. This uniform activation can waste compute, especially as sequences grow longer and attention cost increases rapidly. We propose Grouped Query Experts (GQE), a mixture-of-experts layer on top of grouped-query attention (GQA). Within each GQA group, a router selects k query-head experts per token while all key-value (KV) heads remain dense and unchanged. Thus, GQE keeps the KV cache benefits of GQA and reduces only the active query-head computation. On a fixed 30B token budget at the 250M parameter scale, GQE matches the all-active GQA baseline in downstream accuracy while activating half the query heads per token.

The Transformer architecture has revolutionized deep learning through its Self-Attention mechanism, which effectively captures contextual information. However, the memory footprint of Self-Attention presents significant challenges for long-sequence tasks. Grouped Query Attention (GQA) addresses this issue by grouping queries and mean-pooling the corresponding key-value heads - reducing the number of overall parameters and memory requirements in a flexible manner without adversely compromising model accuracy. In this work, we introduce enhancements to GQA, focusing on two novel approaches that deviate from the static nature of grouping: Key-Distributed GQA (KDGQA) and Dynamic Key-Distributed GQA (DGQA), which leverage information from the norms of the key heads to inform query allocation. Specifically, KDGQA looks at the ratios of the norms of the key heads during each forward pass, while DGQA examines the ratios of the norms as they evolve through training. Additionally, we present Perturbed GQA (PGQA) as a case-study, which introduces variability in (static) group formation via subtracting noise from the attention maps. Our experiments with up-trained Vision Transformers, for Image Classification on datasets such as CIFAR-10, CIFAR-100, Food101, and Tiny ImageNet, demonstrate the promise of these variants in improving upon the original GQA through more informed and adaptive grouping mechanisms: specifically ViT-L experiences accuracy gains of up to 8% when utilizing DGQA in comparison to GQA and other variants. We further analyze the impact of the number of Key-Value Heads on performance, underscoring the importance of utilizing query-key affinities. Code is available on GitHub.

Tokenization is associated with many poorly understood shortcomings in language models (LMs), yet remains an important component for long sequence scaling purposes. This work studies how tokenization impacts model performance by analyzing and comparing the stochastic behavior of tokenized models with their byte-level, or token-free, counterparts. We discover that, even when the two models are statistically equivalent, their predictive distributions over the next byte can be substantially different, a phenomenon we term as "tokenization bias''. To fully characterize this phenomenon, we introduce the Byte-Token Representation Lemma, a framework that establishes a mapping between the learned token distribution and its equivalent byte-level distribution. From this result, we develop a next-byte sampling algorithm that eliminates tokenization bias without requiring further training or optimization. In other words, this enables zero-shot conversion of tokenized LMs into statistically equivalent token-free ones. We demonstrate its broad applicability with two use cases: fill-in-the-middle (FIM) tasks and model ensembles. In FIM tasks where input prompts may terminate mid-token, leading to out-of-distribution tokenization, our method mitigates performance degradation and achieves an approximately 18% improvement in FIM coding benchmarks, consistently outperforming the standard token healing fix. For model ensembles where each model employs a distinct vocabulary, our approach enables seamless integration, resulting in improved performance (up to 3.7%) over individual models across various standard baselines in reasoning, knowledge, and coding.

We present Agglomerative Token Clustering (ATC), a novel token merging method that consistently outperforms previous token merging and pruning methods across image classification, image synthesis, and object detection & segmentation tasks. ATC merges clusters through bottom-up hierarchical clustering, without the introduction of extra learnable parameters. We find that ATC achieves state-of-the-art performance across all tasks, and can even perform on par with prior state-of-the-art when applied off-the-shelf, i.e. without fine-tuning. ATC is particularly effective when applied with low keep rates, where only a small fraction of tokens are kept and retaining task performance is especially difficult.

Knowledge distillation (KD) is a key technique for compressing large-scale language models (LLMs), yet prevailing logit-based methods typically employ static strategies that are misaligned with the dynamic learning process of student models. These methods typically treat all tokens indiscriminately and apply a single, fixed temperature, resulting in suboptimal knowledge transfer. To address these limitations, we propose LLM-Oriented Token-Adaptive Knowledge Distillation (AdaKD), a novel framework that adapts the distillation process to the real-time learning state of each token. AdaKD consists of two synergistic modules driven by a unified token difficulty metric. First, our Loss-Driven Adaptive Token Focusing (LATF) module dynamically adjusts the distillation focus by monitoring the student's learning stability, concentrating computational resources on the most valuable tokens at each training phase. Second, we introduce Inverse Difficulty Temperature Scaling (IDTS), a counterintuitive yet effective token-level temperature strategy. It employs low temperatures for difficult tokens for targeted error correction, and high temperatures for easy tokens to encourage students to learn from the teacher's complete and smooth output distribution, thereby enhancing generalization. As a plug-and-play framework, AdaKD can consistently improve the performance of various distillation methods on multiple model architectures and benchmarks.

Recent innovations in generative large language models (LLMs) have made their applications and use-cases ubiquitous. This has led to large-scale deployments of these models, using complex, expensive, and power-hungry AI accelerators, most commonly GPUs. These developments make LLM inference efficiency an important challenge. Based on our extensive characterization, we find that there are two main phases during an LLM inference request: a compute-intensive prompt computation, and a memory-intensive token generation, each with distinct latency, throughput, memory, and power characteristics. Despite state-of-the-art batching and scheduling, the token generation phase underutilizes compute resources. Specifically, unlike compute-intensive prompt computation phases, token generation phases do not require the compute capability of the latest GPUs, and can be run with lower power and cost. With Splitwise, we propose splitting the two phases of a LLM inference request on to separate machines. This allows us to use hardware that is well-suited for each phase, and provision resources independently per phase. However, splitting an inference request across machines requires state transfer from the machine running prompt computation over to the machine generating tokens. We implement and optimize this state transfer using the fast back-plane interconnects available in today's GPU clusters. We use the Splitwise technique to design LLM inference clusters using the same or different types of machines for the prompt computation and token generation phases. Our clusters are optimized for three key objectives: throughput, cost, and power. In particular, we show that we can achieve 1.4x higher throughput at 20% lower cost than current designs. Alternatively, we can achieve 2.35x more throughput with the same cost and power budgets.

Reinforcement learning, including reinforcement learning with verifiable rewards (RLVR), has emerged as a powerful approach for LLM post-training. Central to these approaches is the design of the importance sampling (IS) ratio used in off-policy policy-gradient estimation. Existing methods face a fundamental bias-variance dilemma: token-level IS ratios, as adopted by PPO (Schulman et al., 2017) and GRPO (Shao et al., 2024), introduce bias by ignoring prefix state distribution mismatch; full sequence ratios provide exact trajectory-level correction but suffer from high variance due to the multiplicative accumulation of per-token ratios, while GSPO (Zheng et al., 2025) improves numerical stability via length normalization at the cost of deviating from the exact full-sequence IS correction. In this work, we identify the cumulative token IS ratio, the product of per-token ratios up to position t, as a theoretically principled solution to this dilemma. We prove that, under the token-level policy-gradient formulation, this ratio provides an unbiased prefix correction for each token-level gradient term and has strictly lower variance than the full sequence ratio. Building on this insight, we propose CTPO (Cumulative Token Policy Optimization), which combines the cumulative token IS ratio with position-adaptive clipping that scales log-space clip bounds according to the natural t growth of the cumulative log-ratio. This yields more consistent regularization across token positions. We implement and evaluate CTPO in the tool-integrated reasoning setting on several challenging mathematical reasoning benchmarks, achieving the best average performance across both model scales compared with strong GRPO and GSPO baselines. Code will be available at https://github.com/horizon-llm/CTPO.

In-context learning is a promising paradigm that utilizes in-context examples as prompts for the predictions of large language models. These prompts are crucial for achieving strong performance. However, since the prompts need to be sampled from a large volume of annotated examples, finding the right prompt may result in high annotation costs. To address this challenge, this paper introduces an influence-driven selective annotation method that aims to minimize annotation costs while improving the quality of in-context examples. The essence of our method is to select a pivotal subset from a large-scale unlabeled data pool to annotate for the subsequent sampling of prompts. Specifically, a directed graph is first constructed to represent unlabeled data. Afterward, the influence of candidate unlabeled subsets is quantified with a diffusion process. A simple yet effective greedy algorithm for unlabeled data selection is lastly introduced. It iteratively selects the data if it provides a maximum marginal gain with respect to quantified influence. Compared with previous efforts on selective annotations, our influence-driven method works in an end-to-end manner, avoids an intractable explicit balance between data diversity and representativeness, and enjoys theoretical support. Experiments confirm the superiority of the proposed method on various benchmarks, achieving better performance under lower time consumption during subset selection. The project page is available at https://skzhang1.github.io/IDEAL/.

As large language models (LLMs) tackle increasingly complex tasks and longer documents, their computational and memory costs during inference become a major bottleneck. To address this, we propose PromptDistill, a novel, training-free method that improves inference efficiency while preserving generation quality. PromptDistill identifies and retains the most informative tokens by leveraging attention interactions in early layers, preserving their hidden states while reducing the computational burden in later layers. This allows the model to focus on essential contextual information without fully processing all tokens. Unlike previous methods such as H2O and SnapKV, which perform compression only after processing the entire input, or GemFilter, which selects a fixed portion of the initial prompt without considering contextual dependencies, PromptDistill dynamically allocates computational resources to the most relevant tokens while maintaining a global awareness of the input. Experiments using our method and baseline approaches with base models such as LLaMA 3.1 8B Instruct, Phi 3.5 Mini Instruct, and Qwen2 7B Instruct on benchmarks including LongBench, InfBench, and Needle in a Haystack demonstrate that PromptDistill significantly improves efficiency while having minimal impact on output quality compared to the original models. With a single-stage selection strategy, PromptDistill effectively balances performance and efficiency, outperforming prior methods like GemFilter, H2O, and SnapKV due to its superior ability to retain essential information. Specifically, compared to GemFilter, PromptDistill achieves an overall 1% to 5% performance improvement while also offering better time efficiency. Additionally, we explore multi-stage selection, which further improves efficiency while maintaining strong generation performance.

Reinforcement learning with verifiable rewards has significantly advanced the reasoning capabilities of large language models, yet how to explicitly steer training toward exploration or exploitation remains an open problem. We introduce Token Hidden Reward (THR), a token-level metric that quantifies each token's influence on the likelihood of correct responses under Group Relative Policy Optimization (GRPO). We find that training dynamics are dominated by a small subset of tokens with high absolute THR values. Most interestingly, tokens with positive THR strengthen confidence in correct outputs, thus favoring exploitation, while tokens with negative THR preserve probability mass for alternative outputs, enabling exploration. This insight suggests a natural intervention: a THR-guided reweighting algorithm that modulates GRPO's learning signals to explicitly bias training toward exploitation or exploration. We validate the efficacy of this algorithm on diverse math reasoning benchmarks. By amplifying tokens with positive THR value and weakening negative ones, our algorithm improves greedy-decoding accuracy, favoring exploitation. The reverse strategy yields consistent gains in Pass@K accuracy, favoring exploration. We further demonstrate that our algorithm integrates seamlessly with other RL objectives such as GSPO and generalizes across architectures including Llama. These findings establish THR as a principled and fine-grained mechanism for dynamically controlling exploration and exploitation in RL-tuned LLMs, providing new tools for targeted fine-tuning in reasoning-intensive applications.

Autoregressive large language models (LLMs) have made remarkable progress in various natural language generation tasks. However, they incur high computation cost and latency resulting from the autoregressive token-by-token generation. To address this issue, several approaches have been proposed to reduce computational cost using early-exit strategies. These strategies enable faster text generation using reduced computation without applying the full computation graph to each token. While existing token-level early exit methods show promising results for online inference, they cannot be readily applied for batch inferencing and Key-Value caching. This is because they have to wait until the last token in a batch exits before they can stop computing. This severely limits the practical application of such techniques. In this paper, we propose a simple and effective token-level early exit method, SkipDecode, designed to work seamlessly with batch inferencing and KV caching. It overcomes prior constraints by setting up a singular exit point for every token in a batch at each sequence position. It also guarantees a monotonic decrease in exit points, thereby eliminating the need to recompute KV Caches for preceding tokens. Rather than terminating computation prematurely as in prior works, our approach bypasses lower to middle layers, devoting most of the computational resources to upper layers, allowing later tokens to benefit from the compute expenditure by earlier tokens. Our experimental results show that SkipDecode can obtain 2x to 5x inference speedups with negligible regression across a variety of tasks. This is achieved using OPT models of 1.3 billion and 6.7 billion parameters, all the while being directly compatible with batching and KV caching optimization techniques.

Reasoning distillation has emerged as an efficient and powerful paradigm for enhancing the reasoning capabilities of large language models. However, reasoning distillation may inadvertently cause benchmark contamination, where evaluation data included in distillation datasets can inflate performance metrics of distilled models. In this work, we formally define the task of distillation data detection, which is uniquely challenging due to the partial availability of distillation data. Then, we propose a novel and effective method Token Probability Deviation (TBD), which leverages the probability patterns of the generated output tokens. Our method is motivated by the analysis that distilled models tend to generate near-deterministic tokens for seen questions, while producing more low-probability tokens for unseen questions. Our key idea behind TBD is to quantify how far the generated tokens' probabilities deviate from a high reference probability. In effect, our method achieves competitive detection performance by producing lower scores for seen questions than for unseen questions. Extensive experiments demonstrate the effectiveness of our method, achieving an AUC of 0.918 and a TPR@1% FPR of 0.470 on the S1 dataset.

Recent advances have demonstrated that integrating reinforcement learning with rule-based rewards can significantly enhance the reasoning capabilities of large language models, even without supervised fine-tuning. However, prevalent reinforcement learning algorithms such as GRPO and its variants like DAPO, suffer from a coarse granularity issue when computing the advantage. Specifically, they compute rollout-level advantages that assign identical values to every token within a sequence, failing to capture token-specific contributions and hindering effective learning. To address this limitation, we propose Key-token Advantage Estimation (KTAE) - a novel algorithm that estimates fine-grained, token-level advantages without introducing additional models. KTAE leverages the correctness of sampled rollouts and applies statistical analysis to quantify the importance of individual tokens within a sequence to the final outcome. This quantified token-level importance is then combined with the rollout-level advantage to obtain a more fine-grained token-level advantage estimation. Empirical results show that models trained with GRPO+KTAE and DAPO+KTAE outperform baseline methods across five mathematical reasoning benchmarks. Notably, they achieve higher accuracy with shorter responses and even surpass R1-Distill-Qwen-1.5B using the same base model.

Chain-of-Thought (CoT) has been proven effective in enhancing the reasoning capabilities of large language models (LLMs). Recent advancements, such as OpenAI's o1 and DeepSeek-R1, suggest that scaling up the length of CoT sequences during inference could further boost LLM reasoning performance. However, due to the autoregressive nature of LLM decoding, longer CoT outputs lead to a linear increase in inference latency, adversely affecting user experience, particularly when the CoT exceeds 10,000 tokens. To address this limitation, we analyze the semantic importance of tokens within CoT outputs and reveal that their contributions to reasoning vary. Building on this insight, we propose TokenSkip, a simple yet effective approach that enables LLMs to selectively skip less important tokens, allowing for controllable CoT compression. Extensive experiments across various models and tasks demonstrate the effectiveness of TokenSkip in reducing CoT token usage while preserving strong reasoning performance. Notably, when applied to Qwen2.5-14B-Instruct, TokenSkip reduces reasoning tokens by 40% (from 313 to 181) on GSM8K, with less than a 0.4% performance drop.

The increasing context window size in Large Language Models (LLMs), such as the GPT and LLaMA series, has improved their ability to tackle complex, long-text tasks, but at the cost of inference efficiency, particularly regarding memory and computational complexity. Existing methods, including selective token retention and window-based attention, improve efficiency but risk discarding important tokens needed for future text generation. In this paper, we propose an approach that enhances LLM efficiency without token loss by reducing the memory and computational load of less important tokens, rather than discarding them.We address two challenges: 1) investigating the distribution of important tokens in the context, discovering recent tokens are more important than distant tokens in context, and 2) optimizing resources for distant tokens by sharing attention scores across layers. The experiments show that our method saves 35% KV cache without compromising the performance.

Transformers achieve state-of-the-art results across many tasks, but their uniform application of quadratic self-attention to every token at every layer makes them computationally expensive. We introduce DTRNet (Dynamic Token Routing Network), an improved Transformer architecture that allows tokens to dynamically skip the quadratic cost of cross-token mixing while still receiving lightweight linear updates. By preserving the MLP module and reducing the attention cost for most tokens to linear, DTRNet ensures that every token is explicitly updated while significantly lowering overall computation. This design offers an efficient and effective alternative to standard dense attention. Once trained, DTRNet blocks routes only ~10% of tokens through attention at each layer while maintaining performance comparable to a full Transformer. It consistently outperforms routing-based layer skipping methods such as MoD and D-LLM in both accuracy and memory at matched FLOPs, while routing fewer tokens to full attention. Its efficiency gains, scales with sequence length, offering significant reduction in FLOPs for long-context inputs. By decoupling token updates from attention mixing, DTRNet substantially reduces the quadratic share of computation, providing a simple, efficient, and scalable alternative to Transformers.

As demand for LLM inference grows, it is becoming increasingly important that providers and their customers can verify that inference processes are performed correctly, without errors or tampering. However, re-running the same inference process twice often leads to different results due to benign numerical noise, making it difficult to distinguish legitimate variation from actual problems. To address this problem, we introduce Token-DiFR (Token-Divergence-From-Reference), a method for verifying inference outputs by comparing generated tokens against predictions made by a trusted reference implementation conditioned on the same random seed. Sampling seed synchronization tightly constrains valid outputs, leaving providers minimal room to deviate from correct inference, which allows output tokens themselves to serve as auditable evidence of correctness at zero additional cost to the provider. Token-DiFR reliably identifies sampling errors, simulated bugs, and model quantization, detecting 4-bit quantization with AUC > 0.999 within 300 output tokens. For applications requiring sample-efficient forward-pass verification, we additionally introduce Activation-DiFR, a scheme that uses random orthogonal projections to compress activations into compact fingerprints for subsequent verification. Activation-DiFR detects 4-bit quantization with AUC > 0.999 using just 2 output tokens, while reducing communication overhead by 25-75% relative to existing methods. We release an open-source integration with vLLM to accelerate practical deployment of verifiable inference.

Transformers have demonstrated success in graph learning, particularly for node-level tasks. However, existing methods encounter an information bottleneck when generating graph-level representations. The prevalent single token paradigm fails to fully leverage the inherent strength of self-attention in encoding token sequences, and degenerates into a weighted sum of node signals. To address this issue, we design a novel serialized token paradigm to encapsulate global signals more effectively. Specifically, a graph serialization method is proposed to aggregate node signals into serialized graph tokens, with positional encoding being automatically involved. Then, stacked self-attention layers are applied to encode this token sequence and capture its internal dependencies. Our method can yield more expressive graph representations by modeling complex interactions among multiple graph tokens. Experimental results show that our method achieves state-of-the-art results on several graph-level benchmarks. Ablation studies verify the effectiveness of the proposed modules.

The development of state-of-the-art large language models is commonly understood as a two-stage process involving pre-training and post-training. We point out the need for an additional intermediate stage called reinforcement mid-training with potential for strong performance gains. In this paper, we formally define the problem and identify three key challenges: (1) inefficient training due to excessive reasoning steps, (2) disregard of the imbalanced token entropy distribution, and (3) underutilization of token information. To address these challenges, we propose RMT, a framework for efficient, adaptive, and unified reinforcement mid-training with various innovative components. In particular, we first introduce a dynamic token budget mechanism that constrains unnecessary reasoning steps and mitigates model overthinking. Next, we design a curriculum-based adaptive sampling method that fosters a progressive learning trajectory from easy to hard tokens. Finally, we present a dual training strategy that combines reinforcement learning with next-token prediction, ensuring targeted learning on key tokens and full exploitation of all token information. Extensive experiments demonstrate the superiority of RMT over state-of-the-art methods, achieving up to +64.91% performance improvement with only 21% of the reasoning length in language modeling. We also show that checkpoints obtained after reinforcement mid-training can benefit the subsequent post-training, yielding up to +18.76% improvement in the mathematical domain.

In Transformer architectures, tokens\textemdash discrete units derived from raw data\textemdash are formed by segmenting inputs into fixed-length chunks. Each token is then mapped to an embedding, enabling parallel attention computations while preserving the input's essential information. Due to the quadratic computational complexity of transformer self-attention mechanisms, token reduction has primarily been used as an efficiency strategy. This is especially true in single vision and language domains, where it helps balance computational costs, memory usage, and inference latency. Despite these advances, this paper argues that token reduction should transcend its traditional efficiency-oriented role in the era of large generative models. Instead, we position it as a fundamental principle in generative modeling, critically influencing both model architecture and broader applications. Specifically, we contend that across vision, language, and multimodal systems, token reduction can: (i) facilitate deeper multimodal integration and alignment, (ii) mitigate "overthinking" and hallucinations, (iii) maintain coherence over long inputs, and (iv) enhance training stability, etc. We reframe token reduction as more than an efficiency measure. By doing so, we outline promising future directions, including algorithm design, reinforcement learning-guided token reduction, token optimization for in-context learning, and broader ML and scientific domains. We highlight its potential to drive new model architectures and learning strategies that improve robustness, increase interpretability, and better align with the objectives of generative modeling.

The wide adoption of AI agents in complex human workflows is driving rapid growth in LLM token consumption. When agents are deployed on tasks that require a significant amount of tokens, three questions naturally arise: (1) Where do AI agents spend the tokens? (2) Which models are more token-efficient? and (3) Can agents predict their token usage before task execution? In this paper, we present the first systematic study of token consumption patterns in agentic coding tasks. We analyze trajectories from eight frontier LLMs on SWE-bench Verified and evaluate models' ability to predict their own token costs before task execution. We find that: (1) agentic tasks are uniquely expensive, consuming 1000x more tokens than code reasoning and code chat, with input tokens rather than output tokens driving the overall cost; (2) token usage is highly variable and inherently stochastic: runs on the same task can differ by up to 30x in total tokens, and higher token usage does not translate into higher accuracy; instead, accuracy often peaks at intermediate cost and saturates at higher costs; (3) models vary substantially in token efficiency: on the same tasks, Kimi-K2 and Claude-Sonnet-4.5, on average, consume over 1.5 million more tokens than GPT-5; (4) task difficulty rated by human experts only weakly aligns with actual token costs, revealing a fundamental gap between human-perceived complexity and the computational effort agents actually expend; and (5) frontier models fail to accurately predict their own token usage (with weak-to-moderate correlations, up to 0.39) and systematically underestimate real token costs. Our study offers new insights into the economics of AI agents and can inspire future research in this direction.

Group Relative Policy Optimisation (GRPO) enhances large language models by estimating advantages across a group of sampled trajectories. However, mapping these trajectory-level advantages to policy updates requires aggregating token-level probabilities within each sequence. Relying on a fixed aggregation mechanism for this step fundamentally limits the algorithm's adaptability. Empirically, we observe a critical trade-off: certain fixed aggregations frequently suffer from training collapse, while others fail to yield satisfactory performance. To resolve this, we propose HölderPO, a generalised policy optimisation framework unifying token-level probability aggregation via the Hölder mean. By explicitly modulating the parameter p, our framework provides continuous control over the trade-off between gradient concentration and variance bounds. Theoretically, we prove that a larger p concentrates the gradient to amplify sparse learning signals, whereas a smaller p strictly bounds gradient variance. Because no static configuration can universally resolve this concentration-stability trade-off, we instantiate the framework with a dynamic annealing algorithm that progressively schedules p across the training lifecycle. Extensive evaluations demonstrate superior stability and convergence over existing baselines. Specifically, our approach achieves a state-of-the-art average accuracy of 54.9% across multiple mathematical benchmarks, yielding a substantial 7.2% relative gain over standard GRPO and secures an exceptional 93.8% success rate on ALFWorld.

The number of groups (g) in group convolution (GConv) is selected to boost the predictive performance of deep neural networks (DNNs) in a compute and parameter efficient manner. However, we show that naive selection of g in GConv creates an imbalance between the computational complexity and degree of data reuse, which leads to suboptimal energy efficiency in DNNs. We devise an optimum group size model, which enables a balance between computational cost and data movement cost, thus, optimize the energy-efficiency of DNNs. Based on the insights from this model, we propose an "energy-efficient group convolution" (E2GC) module where, unlike the previous implementations of GConv, the group size (G) remains constant. Further, to demonstrate the efficacy of the E2GC module, we incorporate this module in the design of MobileNet-V1 and ResNeXt-50 and perform experiments on two GPUs, P100 and P4000. We show that, at comparable computational complexity, DNNs with constant group size (E2GC) are more energy-efficient than DNNs with a fixed number of groups (FgGC). For example, on P100 GPU, the energy-efficiency of MobileNet-V1 and ResNeXt-50 is increased by 10.8% and 4.73% (respectively) when E2GC modules substitute the FgGC modules in both the DNNs. Furthermore, through our extensive experimentation with ImageNet-1K and Food-101 image classification datasets, we show that the E2GC module enables a trade-off between generalization ability and representational power of DNN. Thus, the predictive performance of DNNs can be optimized by selecting an appropriate G. The code and trained models are available at https://github.com/iithcandle/E2GC-release.

Mixture of Experts (MoE) models have emerged as the de facto architecture for scaling up language models without significantly increasing the computational cost. Recent MoE models demonstrate a clear trend towards high expert granularity (smaller expert intermediate dimension) and higher sparsity (constant number of activated experts with higher number of total experts), which improve model quality per FLOP. However, fine-grained MoEs suffer from increased activation memory footprint and reduced hardware efficiency due to higher IO costs, while sparser MoEs suffer from wasted computations due to padding in Grouped GEMM kernels. In response, we propose a memory-efficient algorithm to compute the forward and backward passes of MoEs with minimal activation caching for the backward pass. We also design GPU kernels that overlap memory IO with computation benefiting all MoE architectures. Finally, we propose a novel "token rounding" method that minimizes the wasted compute due to padding in Grouped GEMM kernels. As a result, our method SonicMoE reduces activation memory by 45% and achieves a 1.86x compute throughput improvement on Hopper GPUs compared to ScatterMoE's BF16 MoE kernel for a fine-grained 7B MoE. Concretely, SonicMoE on 64 H100s achieves a training throughput of 213 billion tokens per day comparable to ScatterMoE's 225 billion tokens per day on 96 H100s for a 7B MoE model training with FSDP-2 using the lm-engine codebase. Under high MoE sparsity settings, our tile-aware token rounding algorithm yields an additional 1.16x speedup on kernel execution time compared to vanilla top-K routing while maintaining similar downstream performance. We open-source all our kernels to enable faster MoE model training.

Large Language Models (LLMs) for complex reasoning is often hindered by high computational costs and latency, while resource-efficient Small Language Models (SLMs) typically lack the necessary reasoning capacity. Existing collaborative approaches, such as cascading or routing, operate at a coarse granularity by offloading entire queries to LLMs, resulting in significant computational waste when the SLM is capable of handling the majority of reasoning steps. To address this, we propose RelayLLM, a novel framework for efficient reasoning via token-level collaborative decoding. Unlike routers, RelayLLM empowers the SLM to act as an active controller that dynamically invokes the LLM only for critical tokens via a special command, effectively "relaying" the generation process. We introduce a two-stage training framework, including warm-up and Group Relative Policy Optimization (GRPO) to teach the model to balance independence with strategic help-seeking. Empirical results across six benchmarks demonstrate that RelayLLM achieves an average accuracy of 49.52%, effectively bridging the performance gap between the two models. Notably, this is achieved by invoking the LLM for only 1.07% of the total generated tokens, offering a 98.2% cost reduction compared to performance-matched random routers.

Image tokenization has enabled major advances in autoregressive image generation by providing compressed, discrete representations that are more efficient to process than raw pixels. While traditional approaches use 2D grid tokenization, recent methods like TiTok have shown that 1D tokenization can achieve high generation quality by eliminating grid redundancies. However, these methods typically use a fixed number of tokens and thus cannot adapt to an image's inherent complexity. We introduce FlexTok, a tokenizer that projects 2D images into variable-length, ordered 1D token sequences. For example, a 256x256 image can be resampled into anywhere from 1 to 256 discrete tokens, hierarchically and semantically compressing its information. By training a rectified flow model as the decoder and using nested dropout, FlexTok produces plausible reconstructions regardless of the chosen token sequence length. We evaluate our approach in an autoregressive generation setting using a simple GPT-style Transformer. On ImageNet, this approach achieves an FID<2 across 8 to 128 tokens, outperforming TiTok and matching state-of-the-art methods with far fewer tokens. We further extend the model to support to text-conditioned image generation and examine how FlexTok relates to traditional 2D tokenization. A key finding is that FlexTok enables next-token prediction to describe images in a coarse-to-fine "visual vocabulary", and that the number of tokens to generate depends on the complexity of the generation task.

While scaling laws for recommendation models have gained significant traction, existing architectures such as Wukong, HiFormer and DHEN, often struggle with sub-optimal designs and hardware under-utilization, limiting their practical scalability. Our previous TokenMixer architecture (introduced in RankMixer paper) addressed effectiveness and efficiency by replacing self-attention with a ightweight token-mixing operator; however, it faced critical bottlenecks in deeper configurations, including sub-optimal residual paths, vanishing gradients, incomplete MoE sparsification and constrained scalability. In this paper, we propose TokenMixer-Large, a systematically evolved architecture designed for extreme-scale recommendation. By introducing a mixing-and-reverting operation, inter-layer residuals and the auxiliary loss, we ensure stable gradient propagation even as model depth increases. Furthermore, we incorporate a Sparse Per-token MoE to enable efficient parameter expansion. TokenMixer-Large successfully scales its parameters to 7-billion and 15-billion on online traffic and offline experiments, respectively. Currently deployed in multiple scenarios at ByteDance, TokenMixer-Large has achieved significant offline and online performance gains, delivering an increase of +1.66\% in orders and +2.98\% in per-capita preview payment GMV for e-commerce, improving ADSS by +2.0\% in advertising and achieving a +1.4\% revenue growth for live streaming.