Daily Papers

Federated LLM unlearning addresses targeted knowledge removal when forget and retain data remain distributed across private clients and are inaccessible to the server. The resulting locally trained adapters encode conflicting objectives, making their aggregation fundamentally different from conventional federated optimization. A key failure mode is magnitude explosion, whereby unnormalized cross-client aggregation increases the merged update magnitude and degrades retained utility under stronger unlearning. We propose FIRM (Fisher-Informed Retention Merging), a single-round framework for stable and retention-aware server-side aggregation. FIRM uses client-local Fisher statistics as a unified sensitivity signal to construct a Fisher-normalized base merge and impose explicit control over retain-sensitive parameters. Its second-order retention projection admits a unique minimum-distance solution, while the corresponding dual scales with the number of retain clients rather than the model dimension. Experiments across WMDP, TOFU, and MUSE-HP using Zephyr-7B and Llama-3-8B show utility gains at comparable forgetting on WMDP and MUSE-HP, with metric-dependent trade-offs on TOFU. Controlled comparisons support benefits of the combined base merge and additional retention correction at selected operating points.

Averaging the parameters of models that have the same architecture and initialization can provide a means of combining their respective capabilities. In this paper, we take the perspective that this "merging" operation can be seen as choosing parameters that approximately maximize the joint likelihood of the posteriors of the models' parameters. Computing a simple average of the models' parameters therefore corresponds to making an isotropic Gaussian approximation to their posteriors. We develop an alternative merging procedure based on the Laplace approximation where we approximate each model's posterior as a Gaussian distribution whose precision matrix corresponds to its Fisher information. We first show that our "Fisher merging" technique provides a performance boost in settings where simple parameter averaging is currently used -- specifically, robust fine-tuning and model ensembling. Then, we compare merging to standard gradient-based transfer learning and demonstrate that merging enables a fundamentally different method for transferring capabilities across models. Specifically, we show that Fisher merging is competitive with gradient-based transfer learning approaches (while being significantly cheaper) in intermediate-task training and domain-adaptive pre-training. We also show that our merging procedure makes it possible to combine models in previously unexplored ways. We release our code to facilitate future research into methods for merging models.

Consolidating specialized foundation models into a unified generalist is a central goal of post-training. Two approaches are in common use: model merging, which is fast but treated as a heuristic, and multi-teacher on-policy distillation, which matches distributions but demands heavy rollout compute and suffers from cross-task gradient conflict. We show that the two are one objective seen at different orders. Within a shared basin of homologous specialists, the multi-teacher on-policy distillation objective is, to second order, exactly the Fisher-merging objective. Its minimizer is therefore the Fisher merge, a classic model-merging method given by a closed-form combination of the specialists, so merging is optimal, to second order, as a closed-form stage of distillation. Building on this identification, we propose Residual-Governed Branch-and-Merge(RGBM), a two-phase consolidation procedure. Concretely, a full-parameter Fisher merge is intractable on foundation models, so Phase~1 restricts the merge to the task-vector subspace. Extending tangent-space analyses of merging, we show that the same coefficients that mix task vectors also mix implicit rewards, which lets a residual program on unlabelled prompts solve for them. The program minimizes the worst per-domain residual and reports its energy-normalized values as the domain residual spectrum. Phase~2 lets this spectrum govern what may be added: RGBM passivates domains with low normalized residuals, trains isolated branches only for domains above the spectral gap, and writes back the admitted updates with calibrated shrinkage. On two open-source consolidation suites, the Phase~1 merge alone matches or outperforms fully trained multi-teacher distillation, and RGBM improves on it further with zero extra joint-training steps, whereas every un-gated write-back, including continued joint distillation from the merge, falls below it.

Model merging has emerged as a practical approach to combine capabilities of specialized large language models (LLMs) without additional training. In the Long-to-Short (L2S) scenario, merging a base model with a long-chain-of-thought reasoning model aims to preserve reasoning accuracy while reducing output length. Existing methods rely on Task Arithmetic and its variants, which implicitly assume that model outputs vary linearly with the merging coefficient -- an assumption we show is systematically violated in L2S settings. We provide the first theoretical justification for layer-adaptive merging: we prove that merging error is bounded by a term proportional to the per-layer Hessian norm (Proposition~1), and establish that the Fisher Information Matrix (FIM) is a principled, computable proxy for this bound via the Fisher-Hessian equivalence at local optima. Building on this theory, we propose FIM-Merging, which computes diagonal FIM using only random token inputs (no domain-specific calibration data required) and uses it to assign per-layer merging coefficients. On the 7B L2S benchmark, FIM-TIES achieves state-of-the-art performance on five out of six evaluation benchmarks, including a +6.2 point gain on MATH500 over ACM-TIES (90.2 vs.\ 84.0), while requiring no calibration data. On the 1.5B benchmark, FIM-TIES achieves an average accuracy of 47.3, surpassing the previous best ACM-TIES (43.3) by +3.9 points, while reducing average response length by 91.9\% relative to the long-CoT model. Our framework also provides a unified theoretical explanation for why existing layer-adaptive methods such as ACM empirically outperform uniform merging.

In this paper, we introduce a novel approach for addressing the multi-objective optimization problem in large language model merging via black-box multi-objective optimization algorithms. The goal of model merging is to combine multiple models, each excelling in different tasks, into a single model that outperforms any of the individual source models. However, model merging faces two significant challenges: First, existing methods rely heavily on human knowledge or intuition. Second, it's difficult to obtain the great model merging configuration in limited evaluations. To address these challenges, we formalize model merging as a multi-objective optimization problem and propose an automated optimization approach named MM-MO. This method leverages multi-objective optimization algorithms to autonomously search for optimal merging configurations across various tasks, alleviating the need for human intervention. In MM-MO, a weak-to-strong method is employed to enhance the acquisition function, allowing previously evaluated superior configurations to guide the search for new ones. Meanwhile, Fisher information is applied to screen these configurations, increasing the possibility of identifying high-quality merging configuration. Additionally, we designed a sparsity metric as an additional optimization objective to enhance the model's generalization performance across different tasks. We conducted comprehensive experiments with other mainstream model merging methods, demonstrating that the proposed MM-MO algorithm is competitive and effective in achieving high-quality model merging.

Recent advances in learning rate (LR) scheduling have demonstrated the effectiveness of decay-free approaches that eliminate the traditional decay phase while maintaining competitive performance. Model merging techniques have emerged as particularly promising solutions in this domain. We present Warmup-Stable and Merge (WSM), a general framework that establishes a formal connection between learning rate decay and model merging. WSM provides a unified theoretical foundation for emulating various decay strategies-including cosine decay, linear decay and inverse square root decay-as principled model averaging schemes, while remaining fully compatible with diverse optimization methods. Through extensive experiments, we identify merge duration-the training window for checkpoint aggregation-as the most critical factor influencing model performance, surpassing the importance of both checkpoint interval and merge quantity. Our framework consistently outperforms the widely-adopted Warmup-Stable-Decay (WSD) approach across multiple benchmarks, achieving significant improvements of +3.5% on MATH, +2.9% on HumanEval, and +5.5% on MMLU-Pro. The performance advantages extend to supervised fine-tuning scenarios, highlighting WSM's potential for long-term model refinement.

Weight-space merging aims to combine multiple fine-tuned LLMs into a single model without retraining, yet most existing approaches remain fundamentally parameter-space heuristics. This creates three practical limitations. First, linear averaging, task vectors, and related rules operate on Euclidean coordinates, even though the desired goal is to merge functionality, i.e., predictive behaviors across tasks. Second, when the source checkpoints are farther apart or more heterogeneous, Euclidean blends often trigger representation collapse, manifested as activation variance shrinkage and effective-rank degradation, which sharply degrades accuracy. Third, many geometry-inspired methods are most natural for two-model interpolation and do not extend cleanly to merging N>2 experts with a principled objective. We address these issues by formulating model merging as computing a weighted Karcher mean on the Fisher--Rao manifold, which is locally equivalent to minimizing a KL-based function distance between predictive distributions. We derive a practical fixed-point algorithm using a lightweight spherical proxy that preserves norms and generalizes directly to multi-expert merging. Across various benchmarks and collapse diagnostics, our method remains stable as the number and heterogeneity of merged models increase, consistently outperforming prior baselines.

Low-rank adaptation (LoRA) makes it cheap to train many domain- and task-specific language model adapters, but whether two adapters can be merged is usually discovered only after both have been fully trained and evaluated. This late feedback is costly: adapters that are strong in isolation can interfere destructively once their updates are combined. We ask whether this outcome can be anticipated. We formalize adapter mergeability as the degree to which an adapter preserves its single-task utility after merging, and show that it can be forecast from signals measured in the first few percent of training -- chiefly how the low-rank updates and their gradients align across tasks and how much they disturb shared representations. We package these signals into MergeProbe, a lightweight predictor that estimates pairwise and set-level retention and turns the estimate into a concrete decision: merge directly, reweight, prune, or route. On MERGE-PEFT, a five-domain benchmark spanning math, code, science, instruction following, and safety, MergeProbe attains the best average and worst-case retention among strong interference-aware merge baselines while adding far less deployment overhead than full task routing. This turns LoRA merging from a post-hoc engineering step into an anticipatory measurement problem.

Model merging, a method that combines the parameters and embeddings of multiple fine-tuned large language models (LLMs), offers a promising approach to enhance model performance across various tasks while maintaining computational efficiency. This paper introduces Activation-Informed Merging (AIM), a technique that integrates the information from the activation space of LLMs into the merging process to improve performance and robustness. AIM is designed as a flexible, complementary solution that is applicable to any existing merging method. It aims to preserve critical weights from the base model, drawing on principles from continual learning~(CL) and model compression. Utilizing a task-agnostic calibration set, AIM selectively prioritizes essential weights during merging. We empirically demonstrate that AIM significantly enhances the performance of merged models across multiple benchmarks. Our findings suggest that considering the activation-space information can provide substantial advancements in the model merging strategies for LLMs with up to 40\% increase in benchmark performance.

Model merging combines multiple fine-tuned checkpoints into a single model without additional training, offering an attractive approach to reusing models and efficiently improving performance. However, it remains unclear whether the advantages reported for settings where all merged experts have distinct roles and are tuned on clearly separated tasks also hold in settings where the merged experts do not have clearly distinct roles, but are trained on overlapping or even conflicting objectives. To evaluate this setting, we present a large-scale, systematic evaluation of "in-the-wild" model merging of heterogeneous experts, that may have been trained on overlapping or conflicting objectives. Concretely, we evaluate six state-of-the-art merging methods, including recent subspace methods, across four open-weight LLMs, twelve fine-tuned checkpoints per base model, and sixteen standard LLM benchmarks. Evaluating through standardized benchmarks, we measure both the probability that a model merged from a heterogeneous set of experts outperforms the base model and we measure relative gains over the best individual checkpoint. Our results show that the oldest and simplest method, Task Arithmetic, is the only approach that reliably yields performance gains on LLMs in this "in-the-wild" setting. Other interference-aware and subspace merging methods typically do not result in notable improvements over the base model. Our findings indicate that current merging techniques mostly do not enable extracting useful weight updates from heterogeneous and potentially conflicting versions. This motivates the design of LLM-specific merging algorithms and merging-aware fine-tuning methods.

Data selection is already a central bottleneck in large-language-model training, where web-scale corpora are noisy and token budgets are finite. In continual pre-training (CPT), it becomes a forgetting-control problem: a poorly chosen target-domain corpus can overwrite capabilities encoded in the pretrained checkpoint. Existing CPT practice either scores candidates with parameter-agnostic scalars such as perplexity, or mitigates forgetting by spending many extra general-domain replay tokens. Neither strategy directly asks how training on a candidate will move the model parameters. We show that loss-based selection causes the post-CPT Fisher diagonal to drift downward on exactly the high-Fisher coordinates the pretrained model had committed to, while leaving low-Fisher coordinates largely untouched. This asymmetry exposes a parameter-space mechanism for catastrophic forgetting. Motivated by this observation, we propose a Fisher-aware CPT selector that decomposes each candidate's gradient into an anchor component, which measures perturbation along committed parameter directions, and a frontier component, which measures update capacity in unconstrained low-Fisher subspaces. We aggregate these signals with a log-determinant submodular objective and optimize it in a single pass using a scalable streaming data selection pipeline. On TinyLlama-1.1B and Llama-3.1-8B CPT over medical data, our selector improves target-domain quality while bounding forgetting on held-out pretraining benchmarks. Most importantly, it is substantially more token-efficient than forgetting-aware replay. 1B selected tokens already outperform the replay strategy trained with 10B tokens on both adaptation and forgetting, giving a 10x token-efficiency advantage.

Model merging has emerged as a promising approach for multi-task learning (MTL), offering a data-efficient alternative to conventional fine-tuning. However, with the rapid development of the open-source AI ecosystem and the increasing availability of fine-tuned foundation models, existing model merging methods face two key limitations: (i) They are primarily designed for in-house fine-tuned models, making them less adaptable to diverse model sources with partially unknown model and task information, (ii) They struggle to scale effectively when merging numerous model checkpoints. To address these challenges, we formulate model merging as a constrained optimization problem and introduce a novel approach: Frank-Wolfe Merging (FW-Merging). Inspired by Frank-Wolfe optimization, our approach iteratively selects the most relevant model in the pool to minimize a linear approximation of the objective function and then executes a local merging similar to the Frank-Wolfe update. The objective function is designed to capture the desired behavior of the target-merged model, while the fine-tuned candidate models define the constraint set. More importantly, FW-Merging serves as an orthogonal technique for existing merging methods, seamlessly integrating with them to further enhance accuracy performance. Our experiments show that FW-Merging scales across diverse model sources, remaining stable with 16 irrelevant models and improving by 15.3% with 16 relevant models on 20 CV tasks, while maintaining constant memory overhead, unlike the linear overhead of data-informed merging methods. Compared with the state-of-the-art approaches, FW-Merging surpasses the data-free merging method by 32.8% and outperforms the data-informed Adamerging by 8.39% when merging 20 ViT models. Our code is open-sourced at github.com/hmarkc/FW-Merging.

Fine-tuning pre-trained language models has become the prevalent paradigm for building downstream NLP models. Oftentimes fine-tuned models are readily available but their training data is not, due to data privacy or intellectual property concerns. This creates a barrier to fusing knowledge across individual models to yield a better single model. In this paper, we study the problem of merging individual models built on different training data sets to obtain a single model that performs well both across all data set domains and can generalize on out-of-domain data. We propose a dataless knowledge fusion method that merges models in their parameter space, guided by weights that minimize prediction differences between the merged model and the individual models. Over a battery of evaluation settings, we show that the proposed method significantly outperforms baselines such as Fisher-weighted averaging or model ensembling. Further, we find that our method is a promising alternative to multi-task learning that can preserve or sometimes improve over the individual models without access to the training data. Finally, model merging is more efficient than training a multi-task model, thus making it applicable to a wider set of scenarios.

Model merging provides a compelling paradigm for integrating specialized expertise into a unified multi-task model, a goal that aligns naturally with the sequential knowledge acquisition in continual learning (CL). However, the requirement for preserving diverse forms of previous knowledge conflicts with the storage limitations inherent to CL. In this paper, we systematically analyze existing model merging methods under the constraints of CL. We find that current methods prioritize global alignment, which often leads to the accumulation and amplification of task-specific errors within the continuous data stream; and the vanishing gradients at the onset of subsequent tasks frequently cause optimization to stagnate. These leave the merged model in a suboptimal state at the beginning of the next training phase. To address these challenges, we propose Trajectory Regularized Merging (TRM), a framework that reformulates the merging phase as an optimization process within an augmented trajectory subspace. Our framework integrates three synergistic objectives including task alignment, prediction consistency, and gradient responsiveness to concurrently preserve merged model's historical stability and re-activate optimization dynamics. Extensive experimental results demonstrate that our method achieves state-of-the-art performance across multiple benchmarks.

Model merging aims to combine multiple task-specific expert models into a single model without joint retraining, offering a practical alternative to multi-task learning when data access or computational budget is limited. Existing methods, however, face two key limitations: (1) they overlook the valuable inductive bias of strong anchor models and estimate the merged weights from scratch, and (2) they rely on a shared hyperparameter setting across different modules of the network, lacking a global optimization strategy. This paper introduces Bayesian Model Merging (BMM), a plug-and-play bi-level optimization framework, where the inner level formulates the model merging as an activation-based Bayesian regression under a strong prior induced by an anchor model, yielding an efficient closed-form solution; and the outer level leverages a Bayesian optimization procedure to search module-specific hyperparameters globally based on a small validation set. Furthermore, we reveal a key alignment between activation statistics and task vectors, enabling us to derive a data-free variant of BMM that estimates the Gram matrix for regression without any auxiliary data. Across extensive benchmarks, including up to 20-task merging in vision and 5-task merging in language, BMM consistently outperforms all plug-and-play anchor baselines (e.g., TA, WUDI-Merging, and TSV). In particular, on the ViT-L/14 benchmark for 8-task merging, a single merged model reaches 95.1, closely matching the average performance of eight task-specific experts (95.8).

Sparsely activated Mixture-of-Experts (SMoE) has shown promise to scale up the learning capacity of neural networks, however, they have issues like (a) High Memory Usage, due to duplication of the network layers into multiple copies as experts; and (b) Redundancy in Experts, as common learning-based routing policies suffer from representational collapse. Therefore, vanilla SMoE models are memory inefficient and non-scalable, especially for resource-constrained downstream scenarios. In this paper, we ask: Can we craft a compact SMoE model by consolidating expert information? What is the best recipe to merge multiple experts into fewer but more knowledgeable experts? Our pilot investigation reveals that conventional model merging methods fail to be effective in such expert merging for SMoE. The potential reasons are: (1) redundant information overshadows critical experts; (2) appropriate neuron permutation for each expert is missing to bring all of them in alignment. To address this, we propose M-SMoE, which leverages routing statistics to guide expert merging. Specifically, it starts with neuron permutation alignment for experts; then, dominant experts and their "group members" are formed; lastly, every expert group is merged into a single expert by utilizing each expert's activation frequency as their weight for merging, thus diminishing the impact of insignificant experts. Moreover, we observed that our proposed merging promotes a low dimensionality in the merged expert's weight space, naturally paving the way for additional compression. Hence, our final method, MC-SMoE (i.e., Merge, then Compress SMoE), further decomposes the merged experts into low-rank and structural sparse alternatives. Extensive experiments across 8 benchmarks validate the effectiveness of MC-SMoE. For instance, our MC-SMoE achieves up to 80% memory and a 20% FLOPs reduction, with virtually no loss in performance.

Model merging is a powerful technique for integrating the specialized knowledge of multiple machine learning models into a single model. However, existing methods require manually partitioning model parameters into fixed groups for merging, which restricts the exploration of potential combinations and limits performance. To overcome these limitations, we propose Model Merging of Natural Niches (M2N2), an evolutionary algorithm with three key features: (1) dynamic adjustment of merging boundaries to progressively explore a broader range of parameter combinations; (2) a diversity preservation mechanism inspired by the competition for resources in nature, to maintain a population of diverse, high-performing models that are particularly well-suited for merging; and (3) a heuristicbased attraction metric to identify the most promising pairs of models for fusion. Our experimental results demonstrate, for the first time, that model merging can be used to evolve models entirely from scratch. Specifically, we apply M2N2 to evolve MNIST classifiers from scratch and achieve performance comparable to CMA-ES, while being computationally more efficient. Furthermore, M2N2 scales to merge specialized language and image generation models, achieving state-of-the-art performance. Notably, it preserves crucial model capabilities beyond those explicitly optimized by the fitness function, highlighting its robustness and versatility. Our code is available at https://github.com/SakanaAI/natural_niches

Model merging aims to combine multiple fine-tuned models into a single set of weights that performs well across all source tasks. While prior work has shown that merging can approximate the performance of individual fine-tuned models for each task, it largely overlooks scenarios where models are compressed into low-rank representations, either through low-rank adaptation (LoRA) or post-training singular value decomposition (SVD). We first demonstrate that applying conventional merging methods to low-rank weights leads to severe performance degradation in the merged model. Motivated by this phenomenon, we propose a fundamentally different approach: instead of collapsing all adapters into one set of weights, we construct a compact basis (e.g., an equivalent of holding two or more models) from which original task-specific models can be recovered via linear combination. This reframes merging as generating a reconstruction-capable model space rather than producing a single merged model. Crucially, this allows us to ``revert'' to each individual model when needed, recognizing that no merged model can consistently outperform one specialized for its task. Building on this insight, we introduce our method, Reversible Model Merging (RMM), an efficient, data-free, and flexible method that provides a closed-form solution for selecting the optimal basis of model weights and task-specific coefficients for linear combination. Extensive experiments across diverse datasets and model scales demonstrate that RMM consistently outperforms existing merging approaches, preserving the performance of low-rank compressed models by a significant margin.

Model merging provides a scalable alternative to multi-task training by combining specialized finetuned models through parameter arithmetic, enabling efficient deployment without the need for joint training or access to all task data. While recent methods have shown promise, existing evaluations are limited in both model scale and task diversity, leaving open questions about their applicability to large, domain-specialized LLMs. To tackle the challenges, we introduce MergeBench, a comprehensive evaluation suite designed to assess model merging at scale. MergeBench builds on state-of-the-art open-source language models, including Llama and Gemma families at 2B to 9B scales, and covers five key domains: instruction following, mathematics, multilingual understanding, coding and safety. We standardize finetuning and evaluation protocols, and assess eight representative merging methods across multi-task performance, forgetting and runtime efficiency. Based on extensive experiments, we provide practical guidelines for algorithm selection and share insights showing that model merging tends to perform better on stronger base models, with techniques such as merging coefficient tuning and sparsification improving knowledge retention. However, several challenges remain, including the computational cost on large models, the gap for in-domain performance compared to multi-task models, and the underexplored role of model merging in standard LLM training pipelines. We hope MergeBench provides a foundation for future research to advance the understanding and practical application of model merging. Our project page is at https://yifei-he.github.io/mergebench/{https://yifei-he.github.io/mergebench/}.

In the era of large-scale training, model merging has evolved into a tool for creating multitasking models efficiently. It enables the knowledge of models to be fused, without the need for heavy computation as required in traditional multitask learning. Existing merging methods often assume that entries at identical positions in weight matrices serve the same function, enabling straightforward entry-wise comparison and merging. However, this assumption overlooks the complexity of finetuned neural networks, where neurons may develop distinct feature compositions, making direct entry-wise merging problematic. We present Decom-Renorm-Merge (DRM), a simple yet effective approach that leverages Singular Value Decomposition to decompose and coordinate weight matrices into an aligned joint space, where entry-wise merging becomes possible. We showcase the effectiveness of DRM across various settings ranging from smaller encoder-based such as ViT and DeBERTa, encoder-decoder-based such as T5, and larger decoder-based such as Llama3.1-8B. Our experimental results show that DRM outperforms several state-of-the-art merging techniques across full finetuning and low-rank adaptation settings. Moreover, our analysis reveals renormalization as the crucial component for creating a robust and even joint space for merging, significantly contributing to the method's performance.

Model merging is an efficient post-training strategy for integrating knowledge from multiple finetuned checkpoints of a shared foundation model. Existing methods operate in the parameter space, combining task vectors to mitigate conflicts, but remain constrained by parameter inconsistencies. We propose Functional Dual Anchors (FDAs), a framework that instead models the input-representation space. FDAs are synthetic inputs whose induced gradients align with task vectors, capturing task-specific functional shifts relative to the pretrained model. This perspective bridges joint multi-task training and post-hoc merging, offering both robustness and flexibility. We further introduce a principled initialization scheme and show that FDAs are complementary to parameter-space model merging. Comprehensive experiments demonstrate the effectiveness of FDAs in model merging.

Continual learning (CL) enables deep neural networks to adapt to ever-changing data distributions. In practice, there may be scenarios where annotation is costly, leading to active continual learning (ACL), which performs active learning (AL) for the CL scenarios when reducing the labeling cost by selecting the most informative subset is preferable. However, conventional AL strategies are not suitable for ACL, as they focus solely on learning the new knowledge, leading to catastrophic forgetting of previously learned tasks. Therefore, ACL requires a new AL strategy that can balance the prevention of catastrophic forgetting and the ability to quickly learn new tasks. In this paper, we propose AccuACL, Accumulated informativeness-based Active Continual Learning, by the novel use of the Fisher information matrix as a criterion for sample selection, derived from a theoretical analysis of the Fisher-optimality preservation properties within the framework of ACL, while also addressing the scalability issue of Fisher information-based AL. Extensive experiments demonstrate that AccuACL significantly outperforms AL baselines across various CL algorithms, increasing the average accuracy and forgetting by 23.8% and 17.0%, respectively, on average.

Deep model merging represents an emerging research direction that combines multiple fine-tuned models to harness their specialized capabilities across different tasks and domains. Current model merging techniques focus on merging all available models simultaneously, with weight interpolation-based methods being the predominant approaches. However, these conventional approaches are not well-suited for scenarios where models become available sequentially, and they often suffer from high memory requirements and potential interference between tasks. In this study, we propose a training-free projection-based continual merging method that processes models sequentially through orthogonal projections of weight matrices and adaptive scaling mechanisms. Our method operates by projecting new parameter updates onto subspaces orthogonal to existing merged parameter updates while using an adaptive scaling mechanism to maintain stable parameter distances, enabling efficient sequential integration of task-specific knowledge. Our approach maintains constant memory complexity to the number of models, minimizes interference between tasks through orthogonal projections, and retains the performance of previously merged models through adaptive task vector scaling. Extensive experiments on CLIP-ViT models demonstrate that our method achieves a 5-8% average accuracy improvement while maintaining robust performance in different task orderings.

Model merging is an effective post-training strategy for composing capabilities in large language models without joint retraining. We study this in the supervised fine-tuning (SFT) stage, where multiple capability-based SFT checkpoints -- spanning math, code, precise instruction following, general instruction following, and knowledge recall -- must be consolidated into a single model. We introduce Optimization Trajectory Aware (OTA) Merging, a curvature-aware aggregation that leverages optimizer second-moment statistics as a diagonal curvature proxy to reweight parameter edits and mitigate interference. Complementing OTA, we propose Fast Fisher Grafting (FFG), a curvature-driven task-localization step that sparsifies conflicting or low-importance edits. FFG induces extremely low-rank masks concentrated in early attention query/key projections and token embeddings, exploiting shared curvature across capabilities. We further develop a memory-light compression of the second moments that preserves OTA's effect. Across diverse capability-based SFT checkpoints, OTA+FFG improves merged-model quality over strong weight-space baselines, reduces negative transfer, and remains robust across sparsity levels. Analyses reveal substantial curvature overlap between checkpoints, offering a novel lens on why simple linear merging can be effective in practice. Ablations confirm that FFG is critical for reducing task interference and that the compressed second moments retain the gains of the full formulation. To facilitate reproducibility, we open-source all code, training and evaluation scripts, visualization artifacts, and capability-specific SFT checkpoints at https://github.com/pmahdavi/ota-merge.

While most current approaches rely on further training techniques, such as fine-tuning or reinforcement learning, to enhance model capacities, model merging stands out for its ability of improving models without requiring any additional training. In this paper, we propose a unified framework for model merging based on low-rank estimation of task vectors without the need for access to the base model, named LoRE-Merging. Our approach is motivated by the observation that task vectors from fine-tuned models frequently exhibit a limited number of dominant singular values, making low-rank estimations less prone to interference. We implement the method by formulating the merging problem as an optimization problem. Extensive empirical experiments demonstrate the effectiveness of our framework in mitigating interference and preserving task-specific information, thereby advancing the state-of-the-art performance in model merging techniques.

One of the most popular methods for continual learning with deep neural networks is Elastic Weight Consolidation (EWC), which involves computing the Fisher Information. The exact way in which the Fisher Information is computed is however rarely described, and multiple different implementations for it can be found online. This blog post discusses and empirically compares several often-used implementations, which highlights that many currently reported results for EWC could likely be improved by changing the way the Fisher Information is computed.

Catastrophic forgetting remains a central obstacle for continual learning in neural models. Popular approaches -- replay and elastic weight consolidation (EWC) -- have limitations: replay requires a strong generator and is prone to distributional drift, while EWC implicitly assumes a shared optimum across tasks and typically uses a diagonal Fisher approximation. In this work, we study the gradient geometry of diffusion models, which can already produce high-quality replay data. We provide theoretical and empirical evidence that, in the low signal-to-noise ratio (SNR) regime, per-sample gradients become strongly collinear, yielding an empirical Fisher that is effectively rank-1 and aligned with the mean gradient. Leveraging this structure, we propose a rank-1 variant of EWC that is as cheap as the diagonal approximation yet captures the dominant curvature direction. We pair this penalty with a replay-based approach to encourage parameter sharing across tasks while mitigating drift. On class-incremental image generation datasets (MNIST, FashionMNIST, CIFAR-10, ImageNet-1k), our method consistently improves average FID and reduces forgetting relative to replay-only and diagonal-EWC baselines. In particular, forgetting is nearly eliminated on MNIST and FashionMNIST and is more than halved on ImageNet-1k. These results suggest that diffusion models admit an approximately rank-1 Fisher. With a better Fisher estimate, EWC becomes a strong complement to replay: replay encourages parameter sharing across tasks, while EWC effectively constrains replay-induced drift.

Merging low-rank adapters (LoRAs) promises to eliminate the overhead of swapping task-specific weights at inference time. However, existing merging methods assume every layer needs the same rank budget. Further, some methods assume that rank budget needs to be split equally among the tasks too. We show this uniform-budget assumption is a major source of the performance gap between merged and per-task LoRAs. However, rank selection is an NP hard problem. To this end, we introduce Net Utility, a data free metric that first decomposes every task LoRA by its Singular Value Decomposition (SVD) and scores each of those singular directions by its task utility and its interference with other tasks directions. Next, we globally pool these scores to select singular directions with the highest values with a constraint on the total number of directions selected. The proposed Net Utility metric is applied on top of five different merging methods across three different merging spaces. The merging is done over two sets of tasks, vision and language tasks. Net utility based rank allocation outperforms its counterparts without that allocation. On average, over vision tasks it achieves +2.1% improvement in performance, and +2.2% improvement over the language tasks.

Transfer learning - i.e., further fine-tuning a pre-trained model on a downstream task - can confer significant advantages, including improved downstream performance, faster convergence, and better sample efficiency. These advantages have led to a proliferation of task-specific fine-tuned models, which typically can only perform a single task and do not benefit from one another. Recently, model merging techniques have emerged as a solution to combine multiple task-specific models into a single multitask model without performing additional training. However, existing merging methods often ignore the interference between parameters of different models, resulting in large performance drops when merging multiple models. In this paper, we demonstrate that prior merging techniques inadvertently lose valuable information due to two major sources of interference: (a) interference due to redundant parameter values and (b) disagreement on the sign of a given parameter's values across models. To address this, we propose our method, TrIm, Elect Sign & Merge (TIES-Merging), which introduces three novel steps when merging models: (1) resetting parameters that only changed a small amount during fine-tuning, (2) resolving sign conflicts, and (3) merging only the parameters that are in alignment with the final agreed-upon sign. We find that TIES-Merging outperforms several existing methods in diverse settings covering a range of modalities, domains, number of tasks, model sizes, architectures, and fine-tuning settings. We further analyze the impact of different types of interference on model parameters, highlight the importance of resolving sign interference. Our code is available at https://github.com/prateeky2806/ties-merging

Multi-task model merging aims to consolidate knowledge from multiple fine-tuned task-specific experts into a unified model while minimizing performance degradation. Existing methods primarily approach this by minimizing differences between task-specific experts and the unified model, either from a parameter-level or a task-loss perspective. However, parameter-level methods exhibit a significant performance gap compared to the upper bound, while task-loss approaches entail costly secondary training procedures. In contrast, we observe that performance degradation closely correlates with feature drift, i.e., differences in feature representations of the same sample caused by model merging. Motivated by this observation, we propose Layer-wise Optimal Task Vector Merging (LOT Merging), a technique that explicitly minimizes feature drift between task-specific experts and the unified model in a layer-by-layer manner. LOT Merging can be formulated as a convex quadratic optimization problem, enabling us to analytically derive closed-form solutions for the parameters of linear and normalization layers. Consequently, LOT Merging achieves efficient model consolidation through basic matrix operations. Extensive experiments across vision and vision-language benchmarks demonstrate that LOT Merging significantly outperforms baseline methods, achieving improvements of up to 4.4% (ViT-B/32) over state-of-the-art approaches. The source code is available at https://github.com/SunWenJu123/model-merging.

Model merging has attracted attention as an effective path toward multi-task adaptation by integrating knowledge from multiple task-specific models. Among existing approaches, dynamic merging mitigates performance degradation caused by conflicting parameter updates across tasks by flexibly combining task-specific parameters at inference time, thereby maintaining high performance. However, these methods require storing independent parameters for each task, resulting in prohibitive storage overhead. To address this issue, we first experimentally demonstrate that the fine-tuned weight increments (referred to as task vectors) exhibit an impulse-like activation pattern and high robustness to low-bit representations. Driven by this insight, we propose T-Switch, which decomposes task vectors into three compact components: a binary sparse mask, a sign vector, and a scalar scaling factor, achieving high-fidelity approximation at high compression ratios. We then introduce Auto-Switch, a training-free merging scheme that automatically composes task vectors via feature similarity retrieval. Building on this, we develop Auto-Switch, a training-free merging scheme that automatically assembles task vectors through feature similarity retrieval. Furthermore, to transform task vector sparsification and quantization from static rules to adaptive learning, we propose FlexSwitch, a learnable framework which jointly optimizes the compression strategy for each model unit via Learnable Gating Sparsification (LGS) and Bit-width Adaptive Selection (BAS), while employing the Sparsity-Aware Storage Strategy (SASS) to select the optimal storage encoding structure. Finally, by incorporating a K-Nearest Neighbor (KNN) inference scheme with a learnable low-rank metric, we present Auto-FlexSwitch, a dynamic model merging approach that supports highly efficient task vector compression.

Model merging is an efficient empowerment technique in the machine learning community that does not require the collection of raw training data and does not require expensive computation. As model merging becomes increasingly prevalent across various fields, it is crucial to understand the available model merging techniques comprehensively. However, there is a significant gap in the literature regarding a systematic and thorough review of these techniques. This survey provides a comprehensive overview of model merging methods and theories, their applications in various domains and settings, and future research directions. Specifically, we first propose a new taxonomic approach that exhaustively discusses existing model merging methods. Secondly, we discuss the application of model merging techniques in large language models, multimodal large language models, and 10+ machine learning subfields, including continual learning, multi-task learning, few-shot learning, etc. Finally, we highlight the remaining challenges of model merging and discuss future research directions. A comprehensive list of papers about model merging is available at https://github.com/EnnengYang/Awesome-Model-Merging-Methods-Theories-Applications.

Continual learning aims to equip models with the ability to retain previously learned knowledge like a human. Recent work incorporating Parameter-Efficient Fine-Tuning has revitalized the field by introducing lightweight extension modules. However, existing methods usually overlook the issue of information leakage caused by the fact that the experiment data have been used in pre-trained models. Once these duplicate data are removed in the pre-training phase, their performance can be severely affected. In this paper, we propose a new LoRA-based rehearsal-free method named DESIRE. Our method avoids imposing additional constraints during training to mitigate catastrophic forgetting, thereby maximizing the learning of new classes. To integrate knowledge from old and new tasks, we propose two efficient post-processing modules. On the one hand, we retain only two sets of LoRA parameters for merging and propose dynamic representation consolidation to calibrate the merged feature representation. On the other hand, we propose decision boundary refinement to address classifier bias when training solely on new class data. Extensive experiments demonstrate that our method achieves state-of-the-art performance on multiple datasets and strikes an effective balance between stability and plasticity. Our code will be publicly available.

Model merging combines the parameters of multiple neural networks into a single model without additional training. As fine-tuned large language models (LLMs) proliferate, merging offers a computationally efficient alternative to ensembles and full retraining, enabling practitioners to compose specialized capabilities at minimal cost. This survey examines model merging in the LLM era through the FUSE taxonomy, organized along Foundations, Unification Strategies, Scenarios, and Ecosystem. We first establish the theoretical underpinnings of merging, including loss landscape geometry and mode connectivity, then systematically review the algorithmic space spanning weight averaging, task vector arithmetic, sparsification-enhanced methods, mixture-of-experts architectures, and evolutionary optimization. We further examine downstream applications across multi-task learning, safety alignment, domain specialization, and federated learning, and survey the supporting ecosystem of tools and evaluation benchmarks. Finally, we identify key open challenges and future directions, aiming to equip researchers and practitioners with a structured foundation for advancing model merging.

Merging Large Language Models (LLMs) aims to amalgamate multiple homologous LLMs into one with all the capabilities. Ideally, any LLMs sharing the same backbone should be mergeable, irrespective of whether they are Fine-Tuned (FT) with minor parameter changes or Pre-Trained (PT) with substantial parameter shifts. However, existing methods often manually assign the model importance, rendering them feasible only for LLMs with similar parameter alterations, such as multiple FT LLMs. The diverse parameter changed ranges between FT and PT LLMs pose challenges for current solutions in empirically determining the optimal combination. In this paper, we make a pioneering effort to broaden the applicability of merging techniques from FT to PT LLMs. We initially examine the efficacy of current methods in merging FT and PT LLMs, discovering that they struggle to deal with PT LLMs. Subsequently, we introduce an approach based on WeIght DisENtanglement (WIDEN) to effectively extend the merging scope, which first disentangles model weights into magnitude and direction components, and then performs adaptive fusion by considering their respective contributions. In the experiments, we merge Qwen1.5-Chat (an FT LLM with instruction-following skills) with Sailor (a PT LLM with multilingual abilities) across 7B and 14B model scales. Results reveal that: (1) existing solutions usually fail when merging Sailor, either losing both abilities or only retaining instruction-following skills; (2) WIDEN successfully injects the multilingual abilities of Sailor into Qwen1.5-Chat and make it proficient in Southeast Asian languages, achieving enhancements in the fundamental capabilities. In light of previous research, we also merge multiple 13B FT LLMs and observe that WIDEN achieves a balanced amalgamation of instruction following, mathematical reasoning, and code generation skills.

The widespread availability of fine-tuned LoRA modules for open pre-trained models has led to an interest in methods that can adaptively merge LoRAs to improve performance. These methods typically include some way of selecting LoRAs from a pool and tune merging coefficients based on a task-specific dataset. While adaptive merging methods have demonstrated improvements in some settings, no past work has attempted to recycle LoRAs found "in the wild" on model repositories like the Hugging Face Hub. To address this gap, we consider recycling from a pool of nearly 1,000 user-contributed LoRAs trained from the Llama 3.1 8B-Instruct language model. Our empirical study includes a range of adaptive and non-adaptive merging methods in addition to a new method designed via a wide search over the methodological design space. We demonstrate that adaptive merging methods can improve performance over the base model but provide limited benefit over training a new LoRA on the same data used to set merging coefficients. We additionally find not only that the specific choice of LoRAs to merge has little importance, but that using LoRAs with randomly initialized parameter values yields similar performance. This raises the possibility that adaptive merging from recycled LoRAs primarily works via some kind of regularization effect, rather than by enabling positive cross-task transfer. To better understand why past work has proven successful, we confirm that positive transfer is indeed possible when there are highly relevant LoRAs in the pool. We release the model checkpoints and code online.

Recently, the pretrain-finetune paradigm has become a cornerstone in various deep learning areas. While in general the pre-trained model would promote both effectiveness and efficiency of downstream tasks fine-tuning, studies have shown that not all knowledge acquired during pre-training is beneficial. Some of the knowledge may actually bring detrimental effects to the fine-tuning tasks, which is also known as negative transfer. To address this problem, graceful forgetting has emerged as a promising approach. The core principle of graceful forgetting is to enhance the learning plasticity of the target task by selectively discarding irrelevant knowledge. However, this approach remains underexplored in the context of generative language models, and it is often challenging to migrate existing forgetting algorithms to these models due to architecture incompatibility. To bridge this gap, in this paper we propose a novel framework, Learning With Forgetting (LWF), to achieve graceful forgetting in generative language models. With Fisher Information Matrix weighting the intended parameter updates, LWF computes forgetting confidence to evaluate self-generated knowledge regarding the forgetting task, and consequently, knowledge with high confidence is periodically unlearned during fine-tuning. Our experiments demonstrate that, although thoroughly uncovering the mechanisms of knowledge interaction remains challenging in pre-trained language models, applying graceful forgetting can contribute to enhanced fine-tuning performance.

Model merging integrates the weights of multiple task-specific models into a single multi-task model. Despite recent interest in the problem, a significant performance gap between the combined and single-task models remains. In this paper, we investigate the key characteristics of task matrices -- weight update matrices applied to a pre-trained model -- that enable effective merging. We show that alignment between singular components of task-specific and merged matrices strongly correlates with performance improvement over the pre-trained model. Based on this, we propose an isotropic merging framework that flattens the singular value spectrum of task matrices, enhances alignment, and reduces the performance gap. Additionally, we incorporate both common and task-specific subspaces to further improve alignment and performance. Our proposed approach achieves state-of-the-art performance across multiple scenarios, including various sets of tasks and model scales. This work advances the understanding of model merging dynamics, offering an effective methodology to merge models without requiring additional training. Code is available at https://github.com/danielm1405/iso-merging .

Large language models (LLMs) with extended context lengths rely on the key-value (KV) cache to support attention over prior tokens. However, maintaining the KV cache incurs substantial memory overhead, motivating KV-cache compression methods that enforce a fixed budget through eviction and merging. Modern eviction methods increasingly adopt span-based retention because preserving contiguous spans is empirically effective and better preserves semantic coherence. Yet, when combined with post-eviction merging, span-based retention concentrates merges onto a small set of span-boundary carrier tokens, producing a highly imbalanced merge pattern that exacerbates over-merging and increases information loss. To address this imbalance, we propose GRKV (Global Regression for KV Cache), a training-free KV-cache merging method that directly minimizes the discrepancy between compressed-cache and full-cache attention outputs. GRKV uses ridge-regression-based merge steps to distribute information from evicted tokens across retained tokens, while regularizing the updates to prevent over-smoothing. Across the LongBench and RULER long-context benchmarks, GRKV is the only merging method that improves overall performance with minimal overhead.

Language models may need to internalize information that arrives over time and retain it through many subsequent updates. To study this challenge, we introduce long-horizon memorization, a setting in which a model learns 100 query-answer tasks through continual supervised fine-tuning without retaining earlier training examples or receiving task identifiers at inference. Sequential updates cause catastrophic forgetting, and no single continual learning mechanism we evaluate maintains strong retention at this horizon. We hypothesize that mechanisms addressing complementary sources of forgetting will be more effective when composed. We organize these compositions along two design dimensions. Data, function, and weight anchors specify what prior information each update should preserve, while low-rank allocation rules determine where successive updates are retained. To test this hypothesis systematically, we construct three distinct 100-task memorization datasets. We introduce task-level successive halving to search the combinatorial design space and use a factorial experiment to measure individual and interaction effects. Our best method combines all three anchors with merged LoRA, ranks among the top 3 methods in all datasets, and raises average final retention from 1.2% under naive sequential fine-tuning to 34.9%, a 28-fold improvement. The data anchor and merged LoRA provide the largest average gains and interact super-additively on all three datasets. Together, these results show that composing complementary mechanisms substantially improves long-horizon memorization beyond what any individual mechanism achieves.

Model merging integrates the capabilities of multiple experts without joint retraining, but standard expert training optimizes task loss alone and does not guarantee good performance after merging. Merge-aware training (MAT) aims to improve merged performance, but existing methods do not fully account for common merging operations and add training cost. We observe that, from an expert's perspective, common merging methods can be described by three operations: Scale reweights its own update, Mask removes selected coordinates, and Perturb adds updates from other experts. Based on this view, we introduce SMAT (Simple MAT), which jointly optimizes expert loss and expected loss at simulated merged parameters generated by sampling scaling coefficients, masks, and additive noise. We further introduce periodic scheduling, kernel fusion, and parameter storage switching to make SMAT efficient, with one forward and one backward pass per step. Across four language and vision-language backbones, SMAT improves the mean score across five merging methods by 1.07-2.16 points over the strongest baseline for each backbone, with less than 2% training-time overhead over standard fine-tuning.

The Mixture-of-Experts (MoE) technique has proven to be a promising solution to efficiently scale the model size, which has been widely applied in recent LLM advancements. However, the substantial memory overhead of MoE models has made their compression an important research direction. In this work, we provide a theoretical analysis of expert merging, a recently proposed technique for compressing MoE models. Rather than interpreting expert merging from the conventional perspective of parameter aggregation, we approach it from the perspective of merging experts' outputs. Our key insight is that the merging process can be interpreted as inserting additional matrices into the forward computation, which naturally leads to an optimization formulation. Building on this analysis, we introduce MergeMoE, a method that leverages mathematical optimization to construct the compression matrices. We evaluate MergeMoE on multiple MoE models and show that our algorithm consistently outperforms the baselines with the same compression ratios.

Model merging has emerged as a promising technique for combining multiple fine-tuned models into a single multitask model without retraining. However, the factors that determine whether merging will succeed or fail remain poorly understood. In this work, we investigate why specific models are merged better than others. To do so, we propose a concrete, measurable definition of mergeability. We investigate several potential causes for high or low mergeability, highlighting the base model knowledge as a dominant factor: Models fine-tuned on instances that the base model knows better are more mergeable than models fine-tuned on instances that the base model struggles with. Based on our mergeability definition, we explore a simple weighted merging technique that better preserves weak knowledge in the base model.

With the rapid deployment of SCADA systems, how to effectively analyze industrial signals and detect abnormal states is an urgent need for the industry. Due to the significant heterogeneity of these signals, which we summarize as the M5 problem, previous works only focus on small sub-problems and employ specialized models, failing to utilize the synergies between modalities and the powerful scaling law. However, we argue that the M5 signals can be modeled in a unified manner due to the intrinsic similarity. As a result, we propose FISHER, a Foundation model for multi-modal Industrial Signal compreHEnsive Representation. To support arbitrary sampling rates, FISHER considers the increment of sampling rate as the concatenation of sub-band information. Specifically, FISHER takes the STFT sub-band as the modeling unit and adopts a teacher student SSL framework for pre-training. We also develop the RMIS benchmark, which evaluates the representations of M5 industrial signals on multiple health management tasks. Compared with top SSL models, FISHER showcases versatile and outstanding capabilities with a general performance gain up to 5.03%, along with much more efficient scaling curves. We also investigate the scaling law on downstream tasks and derive potential avenues for future works. FISHER is now open-sourced on https://github.com/jianganbai/FISHER

Model compression is key to mitigate deployment challenges of ever growing machine learning models. In this area of research, singular value decomposition (SVD)-based compression offers a compelling trade-off between computational efficiency and model accuracy. Fisher-weighted SVD in particular provides principled, loss-aware compression. However, we find that improving the fidelity of Fisher approximation used in the compression is poorly predictive of post-compression accuracy for Vision Transformers (ViTs). Motivated by this observation, we propose FACTS, a structured Fisher Approximation tailored to Compressing ViTs with Fisher-weighted SVD, which enforces token-local aggregation while preserving within-token activation-gradient dependence. Additionally, we introduce a fast Constrained Rank Search (CoRS), that optimizes layer-wise rank allocation while adhering to a fixed floating point operation (FLOP) constraint. Extensive experiments across ViTs and hybrid architectures demonstrate that FACTS consistently improves accuracy-efficiency trade-offs without requiring finetuning. Notably, it outperforms the strongest SVD baseline by up to +5.8 percentage points (p.p.) Top-1 on Swin-B, with further gains driven by our search method. Code is available at https://github.com/MoritzTho/FACTS.

While LLMs excel at general tasks, they struggle in specialized domains like finance, requiring diverse skills in domain knowledge, mathematical reasoning, and multilingual processing. Merging domain-specific Continual Pre-training (CPT) "experts" offers a practical alternative to costly and unstable multi-skill training. However, unlike established Supervised Fine-Tuning (SFT) model-based merging, CPT model merging remains largely unexplored. We address this gap by creating financial LLMs from experts in finance, math, and Japanese. We propose a three-stage evaluation focusing on knowledge recovery, complementarity, and emergence, and assess three merging methods (Task Arithmetic, TIES, and DARE-TIES) on a comprehensive financial benchmark curated from 18 tasks across 8 established datasets. Results show that merging an expert with its base model recovers general knowledge lost during CPT, while merging experts improves performance and can yield emergent cross-domain skills. Among the methods, Task Arithmetic performs strongly but is hyperparameter-sensitive, whereas TIES is more robust. Our findings also suggest that while model similarity correlates with merging success, emergent skills depend on more complex factors. This work presents the first foundational analysis of CPT model merging, establishing a principled framework and providing clear guidance for building multi-skill LLMs from existing assets.

Model merging has emerged as a promising approach for unifying independently fine-tuned models into an integrated framework, significantly enhancing computational efficiency in multi-task learning. Recently, several SVD-based techniques have been introduced to exploit low-rank structures for enhanced merging, but their reliance on such manually designed rank selection often leads to cross-task interference and suboptimal performance. In this paper, we propose AdaRank, a novel model merging framework that adaptively selects the most beneficial singular directions of task vectors to merge multiple models. We empirically show that the dominant singular components of task vectors can cause critical interference with other tasks, and that naive truncation across tasks and layers degrades performance. In contrast, AdaRank dynamically prunes the singular components that cause interference and offers an optimal amount of information to each task vector by learning to prune ranks during test-time via entropy minimization. Our analysis demonstrates that such method mitigates detrimental overlaps among tasks, while empirical results show that AdaRank consistently achieves state-of-the-art performance with various backbones and number of tasks, reducing the performance gap between fine-tuned models to nearly 1%.

Fine-grained recognition of aquatic species is challenging due to subtle morphological differences and long-tailed distributions, where ultra-rare species are underrepresented. A natural solution is to jointly model segmentation, morphological traits, and species classification within a multi-task learning (MTL) framework. However, existing MTL methods suffer from negative transfer caused by gradient conflicts between low-level dense tasks and high-level classification objectives, degrading fine-grained representations. To address this limitation, we identify gradient interference across hierarchical tasks as a fundamental bottleneck and propose FISHER, a gradient-decoupled hierarchical multi-task learning framework. FISHER aligns optimization with the biological hierarchy of aquatic species by enforcing a unidirectional information flow from segmentation to trait prediction and finally to species classification, while explicitly decoupling gradients across task boundaries. This design prevents high-level objectives from corrupting low-level morphological representations, effectively mitigating negative transfer while preserving the benefits of shared supervision. Furthermore, we introduce a prototype-based segmentation head with orthogonality regularization to encourage disentangled anatomical representations, and employ homoscedastic uncertainty weighting to dynamically balance task contributions during training. Our analysis shows that robust trait representations serve as a critical bridge for transferring knowledge to ultra-rare species. Extensive experiments on the Fish-Vista benchmark demonstrate that FISHER achieves 97.7% mAP for unseen trait identification and improves ultra-rare species classification accuracy by 13.4% over strong baselines, highlighting the effectiveness of gradient-decoupled hierarchical learning for long-tailed biodiversity recognition.

LLMs have demonstrated remarkable performance across various tasks but face challenges related to unintentionally generating outputs containing sensitive information. A straightforward approach to address this issue is to retrain the model after excluding the problematic data. However, this approach incurs prohibitively high computational costs. To overcome this limitation, machine unlearning has emerged as a promising solution that can effectively remove sensitive information without the need to retrain the model from scratch. Recently, FILA has been proposed as a parameter-efficient unlearning method by integrating LoRA adapters. Specifically, it calculates the Fisher information to identify parameters associated with the forget set and assigns them to LoRA adapters for updates. Despite its innovative approach, FILA still requires access to all model parameters and does not adequately account for fundamental assumptions underlying Fisher information, leading to inaccuracies in importance estimation. To address these limitations, we propose VILA, a novel unlearning framework that explicitly considers the assumptions overlooked in FILA, thereby enhancing the accuracy of parameter identification for the forget set. Moreover, VILA significantly reduces computational costs by enabling parameter identification without accessing the entire model. Our method achieves up to 100x higher parameter efficiency and 40x faster training speed compared to FILA, and sets new state-of-the-art performance on benchmarks including TOFU, WMDP, and MUSE. Our code is available at https://github.com/kyj93790/VILA.

Model merging aims to integrate multiple task-adapted models into a unified model that preserves the knowledge of each task. In this paper, we identify that the key to this knowledge retention lies in maintaining the directional consistency of singular spaces between merged multi-task vector and individual task vectors. However, this consistency is frequently compromised by two issues: i) an imbalanced energy distribution within task vectors, where a small fraction of singular values dominate the total energy, leading to the neglect of semantically important but weaker components upon merging, and ii) the geometric inconsistency of task vectors in parameter space, which causes direct merging to distort their underlying directional geometry. To address these challenges, we propose DC-Merge, a method for directional-consistent model merging. It first balances the energy distribution of each task vector by smoothing its singular values, ensuring all knowledge components are adequately represented. These energy-balanced vectors are then projected onto a shared orthogonal subspace to align their directional geometries with minimal reconstruction error. Finally, the aligned vectors are aggregated in the shared orthogonal subspace and projected back to the original parameter space. Extensive experiments on vision and vision-language benchmarks show that DC-Merge consistently achieves state-of-the-art performance in both full fine-tuning and LoRA settings. The implementation code is available at https://github.com/Tobeginwith/DC-Merge.

Model merging enables the combination of multiple specialized expert models into a single model capable of performing multiple tasks. However, the benefits of merging an increasing amount of specialized experts generally lead to diminishing returns and reduced overall performance gains. In this work, we empirically and theoretically analyze this limitation, proving that for Task Arithmetic-based methods, as more experts are merged, the common information dominates the task-specific information, leading to inevitable rank collapse. To mitigate this issue, we introduce Subspace Boosting, which operates on the singular value decomposed task vector space and maintains task vector ranks. Subspace Boosting raises merging efficacy for up to 20 experts by large margins of more than 10% when evaluated on both vision and language benchmarks. Moreover, we propose employing Higher-Order Generalized Singular Value Decomposition to quantify task similarity, offering a new interpretable perspective on model merging. Code and models are available at https://github.com/ronskoro/Subspace-Boosting.

Model merging aims to combine multiple expert models into a more capable single model, offering benefits such as reduced storage and serving costs, improved generalization, and support for decentralized model development. Despite its promise, previous studies have primarily focused on merging a few small models. This leaves many unanswered questions about the effect of scaling model size and how it interplays with other key factors -- like the base model quality and number of expert models -- , to affect the merged model's performance. This work systematically evaluates the utility of model merging at scale, examining the impact of these different factors. We experiment with merging fully fine-tuned models using 4 popular merging methods -- Averaging, Task~Arithmetic, Dare, and TIES -- across model sizes ranging from 1B-64B parameters and merging up to 8 different expert models. We evaluate the merged models on both held-in tasks, i.e., the expert's training tasks, and zero-shot generalization to unseen held-out tasks. Our experiments provide several new insights about model merging at scale and the interplay between different factors. First, we find that merging is more effective when experts are created from strong base models, i.e., models with good zero-shot performance. Second, larger models facilitate easier merging. Third merging consistently improves generalization capabilities. Notably, when merging 8 large expert models, the merged models often generalize better compared to the multitask trained models. Fourth, we can better merge more expert models when working with larger models. Fifth, different merging methods behave very similarly at larger scales. Overall, our findings shed light on some interesting properties of model merging while also highlighting some limitations. We hope that this study will serve as a reference point on large-scale merging for upcoming research.

The Fisher information is a fundamental concept for characterizing the sensitivity of parameters in neural networks. However, leveraging the full observed Fisher information is too expensive for large models, so most methods rely on simple diagonal approximations. While efficient, this approach ignores parameter correlations, often resulting in reduced performance on downstream tasks. In this work, we mitigate these limitations and propose Generalized Fisher-Weighted SVD (GFWSVD), a post-training LLM compression technique that accounts for both diagonal and off-diagonal elements of the Fisher information matrix, providing a more accurate reflection of parameter importance. To make the method tractable, we introduce a scalable adaptation of the Kronecker-factored approximation algorithm for the observed Fisher information. We demonstrate the effectiveness of our method on LLM compression, showing improvements over existing compression baselines. For example, at a 20 compression rate on the MMLU benchmark, our method outperforms FWSVD, which is based on a diagonal approximation of the Fisher information, by 5 percent, SVD-LLM by 3 percent, and ASVD by 6 percent compression rate.

Large language models (LLMs) have shown remarkable promise but remain challenging to continually improve through traditional finetuning, particularly when integrating capabilities from other specialized LLMs. Popular methods like ensemble and weight merging require substantial memory and struggle to adapt to changing data environments. Recent efforts have transferred knowledge from multiple LLMs into a single target model; however, they suffer from interference and degraded performance among tasks, largely due to limited flexibility in candidate selection and training pipelines. To address these issues, we propose a framework that adaptively selects and aggregates knowledge from diverse LLMs to build a single, stronger model, avoiding the high memory overhead of ensemble and inflexible weight merging. Specifically, we design an adaptive selection network that identifies the most relevant source LLMs based on their scores, thereby reducing knowledge interference. We further propose a dynamic weighted fusion strategy that accounts for the inherent strengths of candidate LLMs, along with a feedback-driven loss function that prevents the selector from converging on a single subset of sources. Experimental results demonstrate that our method can enable a more stable and scalable knowledge aggregation process while reducing knowledge interference by up to 50% compared to existing approaches. Code is avaliable at https://github.com/ZLKong/LLM_Integration

In this paper, we address the challenges associated with merging low-rank adaptations of large neural networks. With the rise of parameter-efficient adaptation techniques, such as Low-Rank Adaptation (LoRA), model fine-tuning has become more accessible. While fine-tuning models with LoRA is highly efficient, existing merging methods often sacrifice this efficiency by merging fully-sized weight matrices. We propose the Core Space merging framework, which enables the merging of LoRA-adapted models within a common alignment basis, thereby preserving the efficiency of low-rank adaptation while substantially improving accuracy across tasks. We further provide a formal proof that projection into Core Space ensures no loss of information and provide a complexity analysis showing the efficiency gains. Extensive empirical results demonstrate that Core Space significantly improves existing merging techniques and achieves state-of-the-art results on both vision and language tasks while utilizing a fraction of the computational resources. Codebase is available at https://github.com/apanariello4/core-space-merging.

Recent advances in large language models have led to numerous task-specialized fine-tuned variants, creating a need for efficient model merging techniques that preserve specialized capabilities while avoiding costly retraining. While existing task vector-based merging methods show promise, they typically apply uniform coefficients across all parameters, overlooking varying parameter importance both within and across tasks. We present Sens-Merging, a sensitivity-guided coefficient adjustment method that enhances existing model merging techniques by operating at both task-specific and cross-task levels. Our method analyzes parameter sensitivity within individual tasks and evaluates cross-task transferability to determine optimal merging coefficients. Extensive experiments on Mistral 7B and LLaMA2-7B/13B models demonstrate that Sens-Merging significantly improves performance across general knowledge, mathematical reasoning, and code generation tasks. Notably, when combined with existing merging techniques, our method enables merged models to outperform specialized fine-tuned models, particularly in code generation tasks. Our findings reveal important trade-offs between task-specific and cross-task scalings, providing insights for future model merging strategies.

The democratization of machine learning systems has made the process of fine-tuning accessible to practitioners, leading to a wide range of open-source models fine-tuned on specialized tasks and datasets. Recent work has proposed to merge such models to combine their functionalities. However, prior approaches are usually restricted to models that are fine-tuned from the same base model. Furthermore, the final merged model is typically required to be of the same size as the original models. In this work, we propose a new two-step algorithm to merge models -- termed PLeaS -- which relaxes these constraints. First, leveraging the Permutation symmetries inherent in the two models, PLeaS partially matches nodes in each layer by maximizing alignment. Next, PLeaS computes the weights of the merged model as a layer-wise Least Squares solution to minimize the approximation error between the features of the merged model and the permuted features of the original models. PLeaS allows a practitioner to merge two models sharing the same architecture into a single performant model of a desired size, even when the two original models are fine-tuned from different base models. We also demonstrate how our method can be extended to address a challenging scenario where no data is available from the fine-tuning domains. We demonstrate our method to merge ResNet and ViT models trained with shared and different label spaces, and show improvement over the state-of-the-art merging methods of up to 15 percentage points for the same target compute while merging models trained on DomainNet and fine-grained classification tasks. Our code is open-sourced at https://github.com/SewoongLab/PLeaS-Merging .

Model merging constructs versatile models by integrating task-specific models without requiring labeled data or expensive joint retraining. Although recent methods improve adaptability to heterogeneous tasks by generating customized merged models for each instance, they face two critical limitations. First, the instance-specific merged models lack reusability, restricting the exploitation of high-quality merging configurations and efficient batch inference. Second, these methods treat each task-specific model as a monolithic whole, overlooking the diverse mergeability of homologous components such as attention and multilayer perceptron layers, and the differing merging sensitivities across components. To address these limitations, we propose MERGE (Modular Expert Recombination for fine-Grained mErging), a method that enables component-wise model merging and input-aware, on-demand module recombination at inference. MERGE formulates component-wise merging as a bi-objective optimization problem that balances cross-task performance and storage efficiency, and develops a surrogate-assisted evolutionary algorithm to efficiently identify Pareto-optimal merging configurations. These high-quality configurations underpin a reusable modular expert library, from which a lightweight routing network dynamically activates and recombines modular experts to assemble input-specific models and enable efficient inference under storage constraints. Extensive experiments across various model scales, task types, and fine-tuning strategies demonstrate that MERGE consistently outperforms strong baselines and generalizes effectively.

Model merging aims to integrate multiple task-specific fine-tuned models derived from a shared pre-trained checkpoint into a single multi-task model without additional training. Despite extensive research, task interference remains a major obstacle that often undermines the performance of merged models. In this paper, we propose ESM (Essential Subspace Merging) , a robust framework for effective model merging. We begin by performing Principal Component Analysis (PCA) on feature shifts induced by parameter updates. The resulting principal directions span an essential subspace that dominantly influences feature representations. Each task's parameter update matrix is projected onto its respective essential subspace for low-rank decomposition before merging. This methodology mitigates inter-task interference while preserving core task-specific functionality. Furthermore, we introduce a multi-level polarized scaling strategy that amplifies parameters containing critical knowledge and suppresses redundant ones, preventing essential knowledge from being overwhelmed during fusion. Extensive experiments across multiple task sets and model scales demonstrate that our method achieves state-of-the-art performance in multi-task model merging.

Checkpoint merging is a technique for combining multiple model snapshots into a single superior model, potentially reducing training time for large language models. This paper explores checkpoint merging in the context of parameter-efficient fine-tuning (PEFT), where only small adapter modules (e.g. LoRA) are trained. We propose Metrics-Weighted Averaging (MWA), a simple yet effective method to merge model checkpoints by weighting their parameters according to performance metrics. In particular, we investigate weighting by training loss and by training steps, under the intuition that lower-loss or later-step checkpoints are more valuable. We introduce a formula with a penalty factor to adjust weight distribution, requiring only one hyperparameter regardless of the number of checkpoints. Experiments on three fine-tuning tasks (mathematical reasoning, preference alignment, and general instruction tuning) show that MWA consistently produces merged models that outperform the naive uniform average of checkpoints. Notably, loss-weighted merging often yields the best results, delivering up to 5% higher task accuracy than the baseline uniform merge and even surpassing the final individual checkpoint's performance. These findings validate checkpoint merging for PEFT and demonstrate that a metric-driven weighting heuristic can efficiently boost model performance with minimal computational overhead.

Model merging, which combines multiple domain-specialized experts into a single model, offers a practical path to endow Large Language Models (LLMs) and Multimodal Large Language Models (MLLMs) with broad capabilities without the cost of joint training or serving many models. However, training-free methods rely on hand-tuned coefficients, whereas training-based methods primarily align parameters rather than downstream task behavior and typically treat all layers uniformly, ignoring inter-layer heterogeneity. We introduce Expert Merging, a training-light method that learns a small set of layer-wise coefficients using only unlabeled calibration data. The coefficients are optimized to explicitly align the merged model's hidden states and logits with those of the corresponding experts, with a coefficient regularizer for stability and task-weighted losses for controllable trade-offs. To capture inter-layer variation, Expert Merging++ augments this design with importance-guided chunking: a normalized layer-importance metric, derived from learned coefficients, task-vector magnitudes, and parameter counts, allocates more chunk-wise coefficients to high-importance layers while keeping low-importance layers lightweight. The result is a label-free, parameter-efficient, and scalable approach to multi-expert model merging across LLMs and MLLMs. Across MLLM backbones (InternVL and Qwen2-VL) and the LLM backbone (Mistral), our method surpasses strong training-free and training-based merging baselines, with Expert Merging++ delivering further gains and, in some cases, even exceeding supervised Mixture Training. The source code is available at https://github.com/Littleor/ExpertMerging.

Model merging aims to cheaply combine individual task-specific models into a single multitask model. In this work, we view past merging methods as leveraging different notions of a ''task subspace'' in which models are matched before being merged. We connect the task subspace of a given model to its loss landscape and formalize how this approach to model merging can be seen as solving a linear system of equations. While past work has generally been limited to linear systems that have a closed-form solution, we consider using the conjugate gradient method to find a solution. We show that using the conjugate gradient method can outperform closed-form solutions, enables merging via linear systems that are otherwise intractable to solve, and flexibly allows choosing from a wide variety of initializations and estimates for the ''task subspace''. We ultimately demonstrate that our merging framework called ''Matching Models in their Task Subspace'' (MaTS) achieves state-of-the-art results in multitask and intermediate-task model merging. We release all of the code and checkpoints used in our work at https://github.com/r-three/mats.

This report studies passage retrieval and re-ranking on the MS MARCO benchmark using lightweight Qwen3-0.6B models. Across three experimental settings --- BM25-then-reranking task, corpus-wide dense retrieval task, and dense retrieval then re-ranking task --- the results demonstrate that competitive ranking performance can be achieved without complex architectural modifications, custom loss functions, or cross-encoder distillation. Instead, substantial gains stem from data-centric strategies: corpus-targeted continued pre-training, rigorous data curation, hard-negative mining, training--inference distribution alignment, and weight merging via Model Soup. In particular, Model Soup delivers marked performance gains while preserving the inference efficiency of a single model. These findings highlight how data curation and weight merging can push sub-billion-parameter models to state-of-the-art performance. My models can be downloaded from Hugging Face: https://huggingface.co/shuguangh/models

We propose a sparsity-aware evolutionary (SAE) framework for model merging that involves iterative pruning-merging cycles to act as a novel mutation operator. We incorporate the sparsity constraints into the score function, which steers the evolutionary process to favor more sparse models, in addition to other conventional performance scores. Interestingly, the by-product of competition for sparsity introduces an extra local attraction and interplay into the evolutionary process: if one competitor has more zero elements, the other competitor's non-zero elements will occupy those positions, even though the less sparse competitor loses to the more sparse competitor in other positions. The proposed pipeline is evaluated on a variety of large-scale LLM benchmarks. Experiments demonstrate that our approach can improve model merging reliability across multiple benchmarks, and is easy to incorporate due to its simplicity and being orthogonal to most existing approaches.

Mixture-of-Experts (MoE) large language models (LLMs) are among the top-performing architectures. The largest models, often with hundreds of billions of parameters, pose significant memory challenges for deployment. Traditional approaches to reduce memory requirements include weight pruning and quantization. Motivated by the Router-weighted Expert Activation Pruning (REAP) that prunes experts, we propose a novel method, Router-weighted Expert Activation Merging (REAM). Instead of removing experts, REAM groups them and merges their weights, better preserving original performance. We evaluate REAM against REAP and other baselines across multiple MoE LLMs on diverse multiple-choice (MC) question answering and generative (GEN) benchmarks. Our results reveal a trade-off between MC and GEN performance that depends on the mix of calibration data. By controlling the mix of general, math and coding data, we examine the Pareto frontier of this trade-off and show that REAM often outperforms the baselines and in many cases is comparable to the original uncompressed models.

Merging multiple expert models offers a promising approach for performing multi-task learning without accessing their original data. Existing methods attempt to alleviate task conflicts by sparsifying task vectors or promoting orthogonality among them. However, they overlook the fundamental target of model merging: the merged model performs as closely as possible to task-specific models on respective tasks. We find these methods inevitably discard task-specific information that, while causing conflicts, is crucial for performance. Based on our findings, we frame model merging as a constrained optimization problem (i.e., minimizing the gap between the merged model and individual models, subject to the constraint of retaining shared knowledge) and solve it via adaptive projective gradient descent. Specifically, we align the merged model with individual models by decomposing and reconstituting the loss function, alleviating conflicts through data-free optimization of task vectors. To retain shared knowledge, we optimize this objective by projecting gradients within a shared subspace spanning all tasks. Moreover, we view merging coefficients as adaptive learning rates and propose a task-aware, training-free strategy. Experiments show that our plug-and-play approach consistently outperforms previous methods, achieving state-of-the-art results across diverse architectures and tasks in both vision and NLP domains.

Mixture of Experts (MoE) LLMs face significant obstacles due to their massive parameter scale, which imposes memory, storage, and deployment challenges. Although recent expert merging methods promise greater efficiency by consolidating multiple experts, they are fundamentally hindered by parameter conflicts arising from expert specialization. In this paper, we present Sub-MoE, a novel MoE compression framework via Subspace Expert Merging. Our key insight is to perform joint Singular Value Decomposition (SVD) on concatenated expert weights, reducing conflicting parameters by extracting shared U-matrices while enabling effective merging of the expert-specific V components. Specifically, Sub-MoE consists of two innovative phases: (1) Adaptive Expert Clustering, which groups functionally coherent experts via K-means clustering based on cosine similarity of expert outputs; and (2) Subspace Expert Merging, which first enforces Experts Union Decomposition to derive the shared U-matrix across experts in the same group, then pursues frequency-based merging for individual V-matrices, and finalizes expert reconstruction using the merged V-matrix. In this way, we align and fuse experts in a shared subspace, and can be extended with intra-expert compression for further inference optimization. Extensive experiments on Mixtral, DeepSeek, and Qwen-1.5|3 MoE LLMs demonstrate that our Sub-MoE significantly outperforms existing expert pruning and merging methods. Notably, our Sub-MoE maintains 96\%|86\% of original performance with 25\%|50\% expert reduction on Mixtral-8x7B in zero-shot benchmarks. Code will be released at https://github.com/lliai/MoERazor.

In the era of large language models, model merging is a promising way to combine multiple task-specific models into a single multitask model without extra training. However, two challenges remain: (a) interference between different models and (b) heterogeneous data during testing. Traditional model merging methods often show significant performance gaps compared to fine-tuned models due to these issues. Additionally, a one-size-fits-all model lacks flexibility for diverse test data, leading to performance degradation. We show that both shared and exclusive task-specific knowledge are crucial for merging performance, but directly merging exclusive knowledge hinders overall performance. In view of this, we propose Twin-Merging, a method that encompasses two principal stages: (1) modularizing knowledge into shared and exclusive components, with compression to reduce redundancy and enhance efficiency; (2) dynamically merging shared and task-specific knowledge based on the input. This approach narrows the performance gap between merged and fine-tuned models and improves adaptability to heterogeneous data. Extensive experiments on 12 datasets for both discriminative and generative tasks demonstrate the effectiveness of our method, showing an average improvement of 28.34% in absolute normalized score for discriminative tasks and even surpassing the fine-tuned upper bound on the generative tasks. (Our implementation is available in https://github.com/LZY-the-boys/Twin-Mergin.)

Model merging aims to consolidate multiple task-specific models fine-tuned on different datasets into a unified architecture that performs cross-domain proficiency. Current data-free model merging methods often struggle to scale as they rely on simple parameter-level heuristics that ignore inter-layer dependencies and non-uniform distribution of expertise. This work proposes SA-Merging, which is built upon connectivity-based saliency formulations from structural pruning (e.g., SynFlow) and extends them to the data-free model merging setting. We define a saliency score over task vectors relative to a shared base model, and further introduce merge-aware modulation that incorporates agreement across experts to mitigate task interference. Based on this formulation, an iterative saliency-aware merging procedure progressively removes non-informative updates while preserving end-to-end connectivity. Furthermore, we extend SA-Merging to introduce rank-wise saliency decomposition for LoRAs without compromising their structural integrity. Extensive experiments on vision and language tasks demonstrate the effectiveness of our saliency-based approach, further reducing the gap between data-free and test-time adaptation methods.

Model merging aims to combine multiple models into one without additional training. Naïve parameter-space averaging can be fragile under architectural symmetries, as their geometry does not take them into account. In this work we show that not only the geometry, but also the averaging procedure itself, must be symmetry-invariant to achieve symmetry-aware merges. Consequently, we propose a general solution: merging as Fréchet averaging, i.e., selecting parameters that minimize a sum of geodesic distances on an appropriate manifold. In this view, the key design choice is the overall geometry, i.e., the choice of metric, manifold, and distance approximation, that determines what it means for two models to be "close". We show that Fréchet averaging, combined with simplifying assumptions, contains Fisher merging. Building on this, we examine the particular case of low-rank adapters (LoRA), whose symmetries induce a distinct geometry: that of a quotient manifold. We outline the limitations of current LoRA merging methods, propose a practical algorithm for this setting, and show how they compare with other commonly used approaches.

In large language model (LLM) unlearning, private information is required to be removed. Task arithmetic unlearns by subtracting a specific task vector (TV)--defined as the parameter difference between a privacy-information-tuned model and the original model. While efficient, it can cause over-forgetting by disrupting parameters essential for retaining other information. Motivated by the observation that each parameter exhibits different importance for forgetting versus retention, we propose a per-parameter task arithmetic (PerTA) mechanism to rescale the TV, allowing per-parameter adjustment. These weights quantify the relative importance of each parameter for forgetting versus retention, estimated via gradients (i.e., PerTA-grad) or the diagonal Fisher information approximation (i.e., PerTA-fisher). Moreover, we discuss the effectiveness of PerTA, extend it to a more general form, and provide further analysis. Extensive experiments demonstrate that PerTA consistently improves upon standard TV, and in many cases surpasses widely used training-based unlearning methods in both forgetting effectiveness and overall model utility. By retaining the efficiency of task arithmetic while mitigating over-forgetting, PerTA offers a principled and practical framework for LLM unlearning.

With more open-source models available for diverse tasks, model merging has gained attention by combining models into one, reducing training, storage, and inference costs. Current research mainly focuses on model merging for full fine-tuning, overlooking the popular LoRA. However, our empirical analysis reveals that: a) existing merging methods designed for full fine-tuning perform poorly on LoRA; b) LoRA modules show much larger parameter magnitude variance than full fine-tuned weights; c) greater parameter magnitude variance correlates with worse merging performance. Considering that large magnitude variances cause deviations in the distribution of the merged parameters, resulting in information loss and performance degradation, we propose a Decoupled and Orthogonal merging approach(DO-Merging). By separating parameters into magnitude and direction components and merging them independently, we reduce the impact of magnitude differences on the directional alignment of the merged models, thereby preserving task information. Furthermore, we introduce a data-free, layer-wise gradient descent method with orthogonal constraints to mitigate interference during the merging of direction components. We provide theoretical guarantees for both the decoupling and orthogonal components. And we validate through extensive experiments across vision, language, and multi-modal domains that our proposed DO-Merging can achieve significantly higher performance than existing merging methods at a minimal cost. Notably, each component can be flexibly integrated with existing methods, offering near free-lunch improvements across tasks.

Model merging allows combining the capabilities of existing models into a new one - post hoc, without additional training. This has made it increasingly popular thanks to its low cost and the availability of libraries that support merging on consumer GPUs. Recent work shows that pairing merging with evolutionary algorithms can boost performance, but no framework currently supports flexible experimentation with such strategies in language models. We introduce Mergenetic, an open-source library for evolutionary model merging. Mergenetic enables easy composition of merging methods and evolutionary algorithms while incorporating lightweight fitness estimators to reduce evaluation costs. We describe its design and demonstrate that Mergenetic produces competitive results across tasks and languages using modest hardware.

Fine-tuning large language models (LMs) for individual tasks yields strong performance but is expensive for deployment and storage. Recent works explore model merging to combine multiple task-specific models into a single multi-task model without additional training. However, existing merging methods often fail for models fine-tuned with low-rank adaptation (LoRA), due to significant performance degradation. In this paper, we show that this issue arises from a previously overlooked interplay between model parameters and data distributions. We propose Orthogonal Subspaces for Robust model Merging (OSRM) to constrain the LoRA subspace *prior* to fine-tuning, ensuring that updates relevant to one task do not adversely shift outputs for others. Our approach can seamlessly integrate with most existing merging algorithms, reducing the unintended interference among tasks. Extensive experiments on eight datasets, tested with three widely used LMs and two large LMs, demonstrate that our method not only boosts merging performance but also preserves single-task accuracy. Furthermore, our approach exhibits greater robustness to the hyperparameters of merging. These results highlight the importance of data-parameter interaction in model merging and offer a plug-and-play solution for merging LoRA models.

How to efficiently serve Large Language Models (LLMs) has become a pressing issue because of their huge computational cost in their autoregressive generation process. To mitigate computational costs, LLMs often employ the KV Cache technique to improve the generation speed. While improving the computational efficiency, the storage requirements of the KV cache are substantial, particularly in long-context scenarios, leading to significant memory consumption. Existing KV cache eviction methods often degrade the performance of LLMs in long-context scenarios due to the information loss introduced by eviction. In this paper, we propose a novel KV cache merging approach, called KVMerger, to achieve adaptive KV cache compression for long-context tasks without significant performance degradation under constrained memory budgets. Our approach is inspired by the intriguing observation that key states exhibit high similarity at the token level within a single sequence. To facilitate merging, we develop an effective yet straightforward merging set identification algorithm to identify suitable KV states for merging. Our merging set identification algorithm stimulates the second observation that KV cache sparsity, from similarity perspective, is independent of the dataset and remains persistent at the model level. Subsequently, we propose a Gaussian kernel weighted merging algorithm to selectively merge all states within each merging set. We conduct extensive experiments to demonstrate the effectiveness of KVMerger for long-context tasks under constrained memory budgets, applying it to models including Llama2-7B-chat and Llama2-13B-chat. Using the LongBench and ZeroScroll benchmarks, we compare our method with other KV cache compression techniques, including H2O and CaM, showing that our method achieves superior performance across tasks with both 50% and 35% KV cache budgets.

Merging Large Language Models (LLMs) is a cost-effective technique for combining multiple expert LLMs into a single versatile model, retaining the expertise of the original ones. However, current approaches often overlook the importance of safety alignment during merging, leading to highly misaligned models. This work investigates the effects of model merging on alignment. We evaluate several popular model merging techniques, demonstrating that existing methods do not only transfer domain expertise but also propagate misalignment. We propose a simple two-step approach to address this problem: (i) generating synthetic safety and domain-specific data, and (ii) incorporating these generated data into the optimization process of existing data-aware model merging techniques. This allows us to treat alignment as a skill that can be maximized in the resulting merged LLM. Our experiments illustrate the effectiveness of integrating alignment-related data during merging, resulting in models that excel in both domain expertise and alignment.

Model merging offers a training-free way to combine multiple post-trained expert models, but merging experts obtained through reinforcement learning (RL) remains challenging. Existing spectral merging methods often assume that leading singular directions contain the main task signal, while lower-energy residual components can be compressed, selected, or attenuated to reduce interference. We find that this assumption does not hold for RL task vectors: after decomposing each task vector into a leading spectral head and a residual component, both parts can independently recover substantial behavior knowledge, while exhibiting different merging properties. The head is highly concentrated and informative but more prone to sharp cross-expert conflicts, whereas the residual component is more dispersed and provides a more stable basis for aggregation. Based on this observation, we propose ResMerge, a residual-based spectral merging framework for RL experts. ResMerge first constructs a stable residual backbone with Spherical Residual Consensus Adaptation, which estimates a reliability-weighted consensus direction on the Frobenius sphere. It then reintroduces leading-head information through a Lightweight Head Correction module gated by positive cross-expert agreement. Experiments across multiple RL expert groups and capability domains show that ResMerge better preserves expert capabilities than representative task-vector and spectral merging baselines.

Model merging refers to the process of integrating multiple distinct models into a unified model that preserves and combines the strengths and capabilities of the individual models. Most existing approaches rely on task vectors to combine models, typically under the assumption that model parameters are accessible. However, for extremely large language models (LLMs) such as GPT-4, which are often provided solely as black-box services through API interfaces (Language-Model-as-a-Service), model weights are not available to end users. This presents a significant challenge, which we refer to as black-box model merging (BMM) with massive LLMs. To address this challenge, we propose a derivative-free optimization framework based on the evolutionary algorithm (Evo-Merging) that enables effective model merging using only inference-time API queries. Our method consists of two key components: (1) sparsity-based denoising, designed to identify and filter out irrelevant or redundant information across models, and (2) sign-aware scaling, which dynamically computes optimal combination weights for the relevant models based on their performance. We also provide a formal justification, along with a theoretical analysis, for our asymmetric sparsification. Extensive experimental evaluations demonstrate that our approach achieves state-of-the-art results on a range of tasks, significantly outperforming existing strong baselines.

Model merging has emerged as a promising technique for enhancing large language models, though its application in large-scale pre-training remains relatively unexplored. In this paper, we present a comprehensive investigation of model merging techniques during the pre-training process. Through extensive experiments with both dense and Mixture-of-Experts (MoE) architectures ranging from millions to over 100 billion parameters, we demonstrate that merging checkpoints trained with constant learning rates not only achieves significant performance improvements but also enables accurate prediction of annealing behavior. These improvements lead to both more efficient model development and significantly lower training costs. Our detailed ablation studies on merging strategies and hyperparameters provide new insights into the underlying mechanisms while uncovering novel applications. Through comprehensive experimental analysis, we offer the open-source community practical pre-training guidelines for effective model merging.

As open-weight large language models (LLMs) achieve ever more impressive performances across a wide range of tasks in English, practitioners aim to adapt these models to different languages. However, such language adaptation is often accompanied by catastrophic forgetting of the base model's capabilities, severely limiting the usefulness of the resulting model. We address this issue by proposing Branch-and-Merge (BaM), a new adaptation method based on iteratively merging multiple models, fine-tuned on a subset of the available training data. BaM is based on the insight that this yields lower magnitude but higher quality weight changes, reducing forgetting of the source domain while maintaining learning on the target domain. We demonstrate in an extensive empirical study on Bulgarian and German that BaM can significantly reduce forgetting while matching or even improving target domain performance compared to both standard continued pretraining and instruction finetuning across different model architectures.

Machine unlearning, the ability for a machine learning model to forget, is becoming increasingly important to comply with data privacy regulations, as well as to remove harmful, manipulated, or outdated information. The key challenge lies in forgetting specific information while protecting model performance on the remaining data. While current state-of-the-art methods perform well, they typically require some level of retraining over the retained data, in order to protect or restore model performance. This adds computational overhead and mandates that the training data remain available and accessible, which may not be feasible. In contrast, other methods employ a retrain-free paradigm, however, these approaches are prohibitively computationally expensive and do not perform on par with their retrain-based counterparts. We present Selective Synaptic Dampening (SSD), a novel two-step, post hoc, retrain-free approach to machine unlearning which is fast, performant, and does not require long-term storage of the training data. First, SSD uses the Fisher information matrix of the training and forgetting data to select parameters that are disproportionately important to the forget set. Second, SSD induces forgetting by dampening these parameters proportional to their relative importance to the forget set with respect to the wider training data. We evaluate our method against several existing unlearning methods in a range of experiments using ResNet18 and Vision Transformer. Results show that the performance of SSD is competitive with retrain-based post hoc methods, demonstrating the viability of retrain-free post hoc unlearning approaches.

Model merging aims to enable multi-task learning by integrating the capabilities of multiple models fine-tuned from the same pre-trained checkpoint into a single model. Its core challenge is inter-task interference among task-specific parameter updates. In this paper, we analyze the output shifts induced by task updates and observe that their energy is concentrated in a small number of principal directions. We call the subspace spanned by these directions the essential subspace. In contrast, most remaining directions carry little task-relevant energy, but their accumulation across multiple task updates can cause severe interference during merging. Motivated by this observation, we propose Essential Subspace Decomposition (ESD), which decomposes each task update according to the principal components of its activation shift. Based on ESD, we introduce Essential Subspace Merging (ESM), a training-free static merging method that orthogonalizes and fuses essential components into one compact multi-task model. We further extend ESM to ESM++, a training-free dynamic merging method that decomposes task-specific residuals into low-rank experts and selects the most relevant expert through prototype-based routing during forward inference. Extensive experiments across multiple task sets and model scales demonstrate that ESM and ESM++ effectively preserves task knowledge while reducing inter-task interference.

Recent research has increasingly focused on reconciling the reasoning capabilities of System 2 with the efficiency of System 1. While existing training-based and prompt-based approaches face significant challenges in terms of efficiency and stability, model merging emerges as a promising strategy to integrate the diverse capabilities of different Large Language Models (LLMs) into a unified model. However, conventional model merging methods often assume uniform importance across layers, overlooking the functional heterogeneity inherent in neural components. To address this limitation, we propose Activation-Guided Consensus Merging (ACM), a plug-and-play merging framework that determines layer-specific merging coefficients based on mutual information between activations of pre-trained and fine-tuned models. ACM effectively preserves task-specific capabilities without requiring gradient computations or additional training. Extensive experiments on Long-to-Short (L2S) and general merging tasks demonstrate that ACM consistently outperforms all baseline methods. For instance, in the case of Qwen-7B models, TIES-Merging equipped with ACM achieves a 55.3\% reduction in response length while simultaneously improving reasoning accuracy by 1.3 points.

While foundation models update slowly due to resource-intensive training requirements, domain-specific models evolve between updates. Model merging aims to combine multiple expert models into a single, more capable model, thereby reducing storage and serving costs while supporting decentralized model development. Despite its potential, previous studies have primarily focused on merging visual classification models or Large Language Models (LLMs) for code and math tasks. Multimodal Large Language Models (MLLMs), which extend the capabilities of LLMs through large-scale multimodal training, have gained traction. However, there lacks a benchmark for model merging research that clearly divides the tasks for MLLM training and evaluation. In this paper, (i) we introduce the model merging benchmark for MLLMs, which includes multiple tasks such as VQA, Geometry, Chart, OCR, and Grounding, providing both LoRA and full fine-tuning models. Moreover, we explore how model merging can combine different modalities (e.g., vision-language, audio-language, and video-language models), moving toward the Omni-language model. (ii) We implement 10 model merging algorithms on the benchmark. Furthermore, we propose a novel method that removes noise from task vectors and robustly optimizes the merged vector based on a loss defined over task vector interactions, achieving an average performance gain of 2.48%. (iii) We find that model merging offers a promising way for building improved MLLMs without requiring data training. Our results also demonstrate that the complementarity among multiple modalities outperforms individual modalities.

Model merging combines trained models directly in weight space, offering a compute-efficient alternative to additional fine-tuning. Selecting merge parameters is nevertheless difficult because downstream evaluations are expensive, gradients are unavailable, and source capabilities can conflict. We formulate merge-parameter selection as a black-box multi-objective optimization problem and introduce MOBO-Merge, a merge-operator agnostic framework that uses multi-objective Bayesian optimization to approximate the Pareto front under a limited evaluation budget. We evaluate Qwen3-4B and Llama-3.1-8B in two-model instruction-math and three-model instruction-math-code settings using Linear, SLERP, TIES, and block-wise merge operators. On held-out benchmark partitions, MOBO-Merge obtains higher mean hypervolume than random search in 11 of 12 reported comparisons. The gain is small for one-dimensional Linear interpolation but substantially larger for several TIES, block-wise, and three-objective searches. No merge operator is uniformly best: TIES leads in three of four family-setting combinations, whereas Block-Linear 4x is strongest for the Llama three-model merge. These results show that multi-objective Bayesian optimization is valuable as a search layer for expressive merge parameterizations.

The recent success of specialized Large Language Models (LLMs) in domains such as mathematical reasoning and coding has led to growing interest in methods for merging these expert LLMs into a unified Mixture-of-Experts (MoE) model, with the goal of enhancing performance in each domain while retaining effectiveness on general tasks. However, the effective merging of expert models remains an open challenge, especially for models with highly divergent weight parameters or different architectures. State-of-the-art MoE merging methods only work with homogeneous model architectures and rely on simple unweighted averaging to merge expert layers, which does not address parameter interference and requires extensive fine-tuning of the merged MoE to restore performance. To address these limitations, this paper introduces new MoE merging techniques, including strategies to mitigate parameter interference, routing heuristics to reduce the need for MoE fine-tuning, and a novel method for merging experts with different architectures. Extensive experiments across multiple domains demonstrate the effectiveness of our proposed methods, reducing fine-tuning costs, improving performance over state-of-the-art methods, and expanding the applicability of MoE merging.

As agentic tasks grow in complexity, LLM agents increasingly rely on experiential memory to reuse procedural knowledge across tasks. Effective memory design must jointly address what to store, how memory is structured and retrieved, and how memory evolves. Existing systems tackle each only partially: they store trajectories, insights, or workflows as isolated entries, discarding compositional relationships among subtasks and reusable skills; retrieve by flat embedding similarity that ignores relational signals; and maintain memory without leveraging its relational structure. We propose HyperSkill, a hypergraph-based memory framework that jointly improves all three. HyperSkill represents memory as a hypergraph with two node types, subtask steps and reusable skills, where each hyperedge links the subtasks and skills from a single trajectory. Dual-path retrieval queries both subtask and trajectory levels, ranking skills by co-occurrence across retrieved trajectories. Periodic structure-informed maintenance prunes low-utility nodes and merges redundant skills via quality-weighted propagation. Across xBench, GAIA, and WebWalkerQA with GPT-4o and Qwen3-30B-A3B, HyperSkill outperforms ten memory baselines, yielding gains of up to +11.51 on GAIA and +11.18 on WebWalkerQA.

With the proliferation of domain-specific models, model merging has emerged as a set of techniques that combine the capabilities of multiple models into one that can multitask without the cost of additional training. In this paper, we propose a new model merging technique, Drop and rEscaLe via sampLing with mAgnitude (DELLA-Merging), that employs a novel pruning technique, MAGPRUNE, which shows significant advantages over DARE and TIES. MAGPRUNE first ranks the parameters in order of their magnitude and assigns higher dropout probabilities (p) to parameters with lower ranks corresponding to lower magnitudes. To approximate the original embeddings, MAGPRUNE employs a rescaling operation on the parameters that survive the random dropping by 1/(1 - p). On three different expert models considered for merging (LM, Math, Code) and corresponding benchmark datasets (AlpacaEval, GSM8K, MBPP), DELLA shows an average improvement of 2.4 points over baseline methods employing delta parameter pruning (an improvement of 3.6 points over TIES, 1.2 points over DARE), and 11.1 points over the no-pruning baseline (TA). We release the source code at: https://github.com/declare-lab/della.

While fine-tuning pretrained models has become common practice, these models often underperform outside their specific domains. Recently developed model merging techniques enable the direct integration of multiple models, each fine-tuned for distinct tasks, into a single model. This strategy promotes multitasking capabilities without requiring retraining on the original datasets. However, existing methods fall short in addressing potential conflicts and complex correlations between tasks, especially in parameter-level adjustments, posing a challenge in effectively balancing parameter competition across various tasks. This paper introduces an innovative technique named PCB-Merging (Parameter Competition Balancing), a lightweight and training-free technique that adjusts the coefficients of each parameter for effective model merging. PCB-Merging employs intra-balancing to gauge parameter significance within individual tasks and inter-balancing to assess parameter similarities across different tasks. Parameters with low importance scores are dropped, and the remaining ones are rescaled to form the final merged model. We assessed our approach in diverse merging scenarios, including cross-task, cross-domain, and cross-training configurations, as well as out-of-domain generalization. The experimental results reveal that our approach achieves substantial performance enhancements across multiple modalities, domains, model sizes, number of tasks, fine-tuning forms, and large language models, outperforming existing model merging methods. The code is publicly available at: https://github.com/duguodong7/pcb-merging.

Test-time adaptation (TTA) seeks to tackle potential distribution shifts between training and testing data by adapting a given model w.r.t. any testing sample. This task is particularly important for deep models when the test environment changes frequently. Although some recent attempts have been made to handle this task, we still face two practical challenges: 1) existing methods have to perform backward computation for each test sample, resulting in unbearable prediction cost to many applications; 2) while existing TTA solutions can significantly improve the test performance on out-of-distribution data, they often suffer from severe performance degradation on in-distribution data after TTA (known as catastrophic forgetting). In this paper, we point out that not all the test samples contribute equally to model adaptation, and high-entropy ones may lead to noisy gradients that could disrupt the model. Motivated by this, we propose an active sample selection criterion to identify reliable and non-redundant samples, on which the model is updated to minimize the entropy loss for test-time adaptation. Furthermore, to alleviate the forgetting issue, we introduce a Fisher regularizer to constrain important model parameters from drastic changes, where the Fisher importance is estimated from test samples with generated pseudo labels. Extensive experiments on CIFAR-10-C, ImageNet-C, and ImageNet-R verify the effectiveness of our proposed method.

By merging models, AI systems can combine the distinct strengths of separate language models, achieving a balance between multiple capabilities without requiring substantial retraining. However, the integration process can be intricate due to differences in training methods and fine-tuning, typically necessitating specialized knowledge and repeated refinement. This paper explores model merging techniques across a spectrum of complexity, examining where automated methods like evolutionary strategies stand compared to hyperparameter-driven approaches such as DARE, TIES-Merging and simpler methods like Model Soups. In addition, we introduce Differentiable Adaptive Merging (DAM), an efficient, adaptive merging approach as an alternative to evolutionary merging that optimizes model integration through scaling coefficients, minimizing computational demands. Our findings reveal that even simple averaging methods, like Model Soups, perform competitively when model similarity is high, underscoring each technique's unique strengths and limitations. We open-sourced DAM, including the implementation code and experiment pipeline, on GitHub: https://github.com/arcee-ai/DAM.

Unlearning in large language models (LLMs) aims to remove specified data, but its efficacy is typically assessed with task-level metrics like accuracy and perplexity. We demonstrate that these metrics are often misleading, as models can appear to forget while their original behavior is easily restored through minimal fine-tuning. This phenomenon of reversibility suggests that information is merely suppressed, not genuinely erased. To address this critical evaluation gap, we introduce a representation-level analysis framework. Our toolkit comprises PCA-based similarity and shift, centered kernel alignment (CKA), and Fisher information, complemented by a summary metric, the mean PCA distance, to measure representational drift. Applying this framework across six unlearning methods, three data domains, and two LLMs, we identify four distinct forgetting regimes based on their reversibility and catastrophicity. Our analysis reveals that achieving the ideal state--irreversible, non-catastrophic forgetting--is exceptionally challenging. By probing the limits of unlearning, we identify a case of seemingly irreversible, targeted forgetting, offering new insights for designing more robust erasure algorithms. Our findings expose a fundamental gap in current evaluation practices and establish a representation-level foundation for trustworthy unlearning.

Evolutionary model merging enables the creation of high-performing multi-task models but remains computationally prohibitive for consumer hardware. We introduce MERGE^3, an efficient framework that makes evolutionary merging feasible on a single GPU by reducing fitness computation costs 50times while preserving performance. MERGE^3 achieves this by Extracting a reduced dataset for evaluation, Estimating model abilities using Item Response Theory (IRT), and Evolving optimal merges via IRT-based performance estimators. Our method enables state-of-the-art multilingual and cross-lingual merging, transferring knowledge across languages with significantly lower computational overhead. We provide theoretical guarantees and an open-source library, democratizing high-quality model merging.

Large language model (LLM) merging has become a key technique in modern LLM development pipelines, enabling the integration of multiple task- or domain-specific expert models without retraining. However, as the number of experts grows, existing merging implementations treat model parameters as unstructured files and execute merges in a stateless, one-shot manner, leading to excessive disk I/O, redundant parameter scans, and poor scalability. In this paper, we present MergePipe, a parameter management system for scalable LLM merging. MergePipe is the first system that treats LLM merging as a data management and execution problem, and introduces a catalog-driven abstraction over model parameters, merge plans, and execution lineage. At its core, MergePipe employs a cost-aware planner that explicitly models expert parameter I/O and enforces user-specified I/O budgets, followed by a streaming execution engine that materializes merged models under transactional guarantees. Our key insight is that while base model reads and output writes are unavoidable, expert parameter reads dominate merge cost and constitute the primary optimization target. By making expert access budget-aware throughout planning and execution, MergePipe mitigates the O(K) I/O growth of naive pipelines and achieves predictable scaling behavior. Experiments show that MergePipe reduces total I/O by up to an order of magnitude and delivers up to 11times end-to-end speedups (up to 90\% wall-time reduction) over state-of-the-art LLM merging pipelines.

While orthogonal subspace methods try to mitigate task interference in Continual Learning (CL), they often suffer from energy diffusion across the basis, hindering knowledge compaction and exhausting capacity for future tasks. We observe that output feature drift induced by parameter updates is inherently low-rank, and theoretically prove that preserving parameters along the principal directions of this drift minimizes the output reconstruction error. Motivated by this, we propose Energy-Concentrated and Energy-Ordered Low-Rank Adaptation (E^2-LoRA). By explicitly ordering and concentrating knowledge into leading ranks, E^2-LoRA frees capacity for subsequent tasks. Furthermore, we design a dynamic rank allocation strategy to balance stability and plasticity by jointly optimizing energy retention and model plasticity. Extensive experiments across multiple benchmarks demonstrate that E^2-LoRA achieves state-of-the-art performance.

Recent model merging methods demonstrate that the parameters of fully-finetuned models specializing in distinct tasks can be combined into one model capable of solving all tasks without retraining. Yet, this success does not transfer well when merging LoRA finetuned models. We study this phenomenon and observe that the weights of LoRA finetuned models showcase a lower degree of alignment compared to their fully-finetuned counterparts. We hypothesize that improving this alignment is key to obtaining better LoRA model merges, and propose KnOTS to address this problem. KnOTS uses the SVD to jointly transform the weights of different LoRA models into an aligned space, where existing merging methods can be applied. In addition, we introduce a new benchmark that explicitly evaluates whether merged models are general models. Notably, KnOTS consistently improves LoRA merging by up to 4.3% across several vision and language benchmarks, including our new setting. We release our code at: https://github.com/gstoica27/KnOTS.

Merging has become a widespread way to cheaply combine individual models into a single model that inherits their capabilities and attains better performance. This popularity has spurred rapid development of many new merging methods, which are typically validated in disparate experimental settings and frequently differ in the assumptions made about model architecture, data availability, and computational budget. In this work, we characterize the relative merits of different merging methods by evaluating them in a shared experimental setting and precisely identifying the practical requirements of each method. Specifically, our setting focuses on using merging for compositional generalization of capabilities in image classification, image generation, and natural language processing. Additionally, we measure the computational costs of different merging methods as well as how they perform when scaling the number of models being merged. Taken together, our results clarify the state of the field of model merging and provide a comprehensive and rigorous experimental setup to test new methods.

Large language models store all learned knowledge in a single, fixed weight vector. Teaching a model new capabilities requires modifying those same weights, inevitably degrading previously acquired knowledge. This fundamental limitation, known as catastrophic forgetting, has resisted principled solutions for decades. Existing approaches treat weights as immutable artifacts that must be protected through techniques like regularization heuristics, replay buffers, or isolated adapter modules. The problem is none of these provide a structural guarantee against forgetting. In this work, we propose Non-Interfering Weight Fields (NIWF), a framework that replaces the fixed weight paradigm with a learned function that generates weight configurations on demand from a continuous capability coordinate space. After training on a task, we commit the occupied coordinate region by snapshotting the fields outputs on anchor points to enforce a functional lock during all future training. We validate NIWF on sequential instructionfollowing and code generation tasks using Mistral-7B, demonstrating zero forgetting on committed tasks with competitive perplexity on new tasks. The framework introduces the notion of software-like versioning for neural network intelligence, where capabilities can be committed, extended, composed, and rolled back without retraining.

Fine-tuning pre-trained models with custom data leads to numerous expert models on specific tasks. Merging models into one universal model to empower multi-task ability refraining from data leakage has gained popularity. With the expansion in data and model size, parameter efficient tuning becomes the common practice for obtaining task-specific models efficiently. However, we observe that existing methods designed for full fine-tuning merging fail under efficient tuning. To address the issues, we analyze from low-rank decomposition and reveal that maintaining direction and compensating for gap between singular values are crucial for efficient model merging. Consequently, we propose CoPA-Merging, a training-free parameter efficient merging method with complementary parameter adaptation. Specifically, we (1) prune parameters and construct scaling coefficients from inter-parameter relation to compensate for performance drop from task interference and (2) perform cross-task normalization to enhance unseen task generalization. We establish a benchmark consisting of diverse multimodal tasks, on which we conduct experiments to certificate the outstanding performance and generalizability of our method. Additional study and extensive analyses further showcase the effectiveness.

The rapid expansion of the open-source language model landscape presents an opportunity to merge the competencies of these model checkpoints by combining their parameters. Advances in transfer learning, the process of fine-tuning pretrained models for specific tasks, has resulted in the development of vast amounts of task-specific models, typically specialized in individual tasks and unable to utilize each other's strengths. Model merging facilitates the creation of multitask models without the need for additional training, offering a promising avenue for enhancing model performance and versatility. By preserving the intrinsic capabilities of the original models, model merging addresses complex challenges in AI - including the difficulties of catastrophic forgetting and multitask learning. To support this expanding area of research, we introduce MergeKit, a comprehensive, open-source library designed to facilitate the application of model merging strategies. MergeKit offers an extensible framework to efficiently merge models on any hardware, providing utility to researchers and practitioners. To date, thousands of models have been merged by the open-source community, leading to the creation of some of the worlds most powerful open-source model checkpoints, as assessed by the Open LLM Leaderboard. The library is accessible at https://github.com/arcee-ai/MergeKit.

Recently, Ainsworth et al. showed that using weight matching (WM) to minimize the L_2 distance in a permutation search of model parameters effectively identifies permutations that satisfy linear mode connectivity (LMC), in which the loss along a linear path between two independently trained models with different seeds remains nearly constant. This paper provides a theoretical analysis of LMC using WM, which is crucial for understanding stochastic gradient descent's effectiveness and its application in areas like model merging. We first experimentally and theoretically show that permutations found by WM do not significantly reduce the L_2 distance between two models and the occurrence of LMC is not merely due to distance reduction by WM in itself. We then provide theoretical insights showing that permutations can change the directions of the singular vectors, but not the singular values, of the weight matrices in each layer. This finding shows that permutations found by WM mainly align the directions of singular vectors associated with large singular values across models. This alignment brings the singular vectors with large singular values, which determine the model functionality, closer between pre-merged and post-merged models, so that the post-merged model retains functionality similar to the pre-merged models, making it easy to satisfy LMC. Finally, we analyze the difference between WM and straight-through estimator (STE), a dataset-dependent permutation search method, and show that WM outperforms STE, especially when merging three or more models.

Model merging provides a way of cheaply combining individual models to produce a model that inherits each individual's capabilities. While some merging methods can approach the performance of multitask training, they are often heuristically motivated and lack theoretical justification. A principled alternative is to pose model merging as a layer-wise optimization problem that directly minimizes interference between tasks. However, this formulation requires estimating per-layer covariance matrices from data, which may not be available when performing merging. In contrast, many of the heuristically-motivated methods do not require auxiliary data, making them practically advantageous. In this work, we revisit the interference minimization framework and show that, under certain conditions, covariance matrices can be estimated directly from difference matrices, eliminating the need for data while also reducing computational costs. We validate our approach across vision and language benchmarks on models ranging from 86M parameters to 7B parameters, outperforming previous data-free state-of-the-art merging methods

On-device deployment of Large Language Models (LLMs) frequently leverages Low-Rank Adapters (LoRAs) to support diverse downstream tasks under tight resource constraints. To address the limited storage capacity of mobile devices, recent works have explored model merging techniques to fuse multiple LoRAs into a single one. In practice, however, LoRAs are often delivered incrementally, as users request support for new tasks (e.g., novel problem types or languages). This scenario introduces a new challenge: on-device online continual merging, where the objective is to incorporate new LoRAs while preserving the performance on previously supported tasks. In this paper, we propose a data-free and computationally efficient strategy for selecting and merging LoRAs when a new one becomes available, assuming the device can store only a limited number of adapters. Extensive experiments across real-world tasks demonstrate the superiority of our approach compared to alternative strategies while adhering to the storage budget and compute limitations of on-device settings.

Sparsely-activated Mixture-of-Experts (SMoE) models offer efficient pre-training and low latency but their large parameter counts create significant memory overhead, motivating research into expert compression. Contrary to recent findings favouring expert merging on discriminative benchmarks, we demonstrate that expert pruning is a superior strategy for generative tasks. We prove that merging introduces an irreducible error by causing a "functional subspace collapse", due to the loss of the router's independent, input-dependent control over experts. Leveraging this insight, we propose Router-weighted Expert Activation Pruning (REAP), a novel pruning criterion that considers both router gate-values and expert activation norms. Across a diverse set of SMoE models ranging from 20B to 1T parameters, REAP consistently outperforms merging and other pruning methods on generative benchmarks, especially at 50% compression. Notably, our method achieves near-lossless compression on code generation and tool-calling tasks with Qwen3-Coder-480B and Kimi-K2, even after pruning 50% of experts.

Model merging seeks to integrate task-specific expert models into a unified architecture while preserving multi-task generalization capabilities, yet parameter interference between constituent models frequently induces performance degradation. Although prior work has explored many merging strategies, resolving interference without additional data for retraining or test-time computation remains challenging. In this paper, we theoretically demonstrate that the task vectors of the linear layer constitute an approximate linear subspace for its corresponding input. Therefore, we can minimize interference under the guidance of task vectors. Based on this insight, we propose WUDI-Merging (Whoever started the interference shoUld enD It), a simple yet effective model merging method that eliminates interference without any additional data or rescaling coefficients. Comprehensive empirical evaluations across vision and language benchmarks demonstrate our method's superiority, achieving state-of-the-art performance in data-free model merging scenarios (average 10.9\% improvement versus baseline methods) while even outperforming mainstream test-time adaptation approaches by 3.3\%, and only very few computing resources are required. The code will be publicly available soon.

Weight-space model merging is usually formulated as an algebraic operation on checkpoints, yet at LLM scale the limiting resource is often the set of expert weights that must be read. We introduce MergePipe, a budget-aware execution layer that casts LLM merging as an expert access-set problem: given a merge operator and a checkpoint family in a shared weight coordinate system, choose which expert delta blocks to access under an explicit I/O budget. MergePipe indexes parameter blocks, builds deterministic access plans, and executes the induced budgeted merge with replayable manifests. The plan is budget-sound by construction and recovers the full-read merge at full budget; for fixed-coefficient additive operators, the omitted-update error is bounded by the norm of omitted deltas. Across Qwen and Llama merging workloads, MergePipe reduces expert-read I/O by up to an order of magnitude and achieves up to 11times speedups. Representative budget sweeps show O(10^{-3}) parameter deviation from full-read merges and no monotonic degradation on downstream benchmarks.

The remarkable success of Large Language Models (LLMs) has ushered natural language processing (NLP) research into a new era. Despite their diverse capabilities, LLMs trained on different corpora exhibit varying strengths and weaknesses, leading to challenges in maximizing their overall efficiency and versatility. To address these challenges, recent studies have explored collaborative strategies for LLMs. This paper provides a comprehensive overview of this emerging research area, highlighting the motivation behind such collaborations. Specifically, we categorize collaborative strategies into three primary approaches: Merging, Ensemble, and Cooperation. Merging involves integrating multiple LLMs in the parameter space. Ensemble combines the outputs of various LLMs. Cooperation} leverages different LLMs to allow full play to their diverse capabilities for specific tasks. We provide in-depth introductions to these methods from different perspectives and discuss their potential applications. Additionally, we outline future research directions, hoping this work will catalyze further studies on LLM collaborations and paving the way for advanced NLP applications.

Retrieval, re-ranking, and retrieval-augmented generation (RAG) are critical components of modern applications in information retrieval, question answering, or knowledge-based text generation. However, existing solutions are often fragmented, lacking a unified framework that easily integrates these essential processes. The absence of a standardized implementation, coupled with the complexity of retrieval and re-ranking workflows, makes it challenging for researchers to compare and evaluate different approaches in a consistent environment. While existing toolkits such as Rerankers and RankLLM provide general-purpose reranking pipelines, they often lack the flexibility required for fine-grained experimentation and benchmarking. In response to these challenges, we introduce Rankify, a powerful and modular open-source toolkit designed to unify retrieval, re-ranking, and RAG within a cohesive framework. Rankify supports a wide range of retrieval techniques, including dense and sparse retrievers, while incorporating state-of-the-art re-ranking models to enhance retrieval quality. Additionally, Rankify includes a collection of pre-retrieved datasets to facilitate benchmarking, available at Huggingface (https://huggingface.co/datasets/abdoelsayed/reranking-datasets-light). To encourage adoption and ease of integration, we provide comprehensive documentation (http://rankify.readthedocs.io/), an open-source implementation on GitHub (https://github.com/DataScienceUIBK/rankify), and a PyPI package for easy installation (https://pypi.org/project/rankify/). As a unified and lightweight framework, Rankify allows researchers and practitioners to advance retrieval and re-ranking methodologies while ensuring consistency, scalability, and ease of use.

As the demand for comprehensive evaluations of diverse model capabilities steadily increases, benchmark suites have correspondingly grown significantly in scale. Despite notable advances in redundancy reduction and subset-level performance prediction, a systematic framework that effectively integrates these methods to ensure both prediction accuracy and ranking consistency is still largely elusive. In this paper, we first perform a sample-level analysis of benchmark redundancy and identify several highly similar samples that can be eliminated. Besides, we frame benchmark compression as an optimization problem with the aim of score reconstruction. Building on these, we then propose EssenceBench, a coarse-to-fine framework utilizing an iterative Genetic Algorithm (GA), which takes the advantages of fitness-based subset search and attribution-based sample search. Compared to previous methods, our approach yields superior compression results with lower reconstruction error and markedly higher efficiency. In particular, on the HellaSwag benchmark (10K samples), our method preserves the ranking of all models shifting within 5% using 25x fewer samples, and achieves 95% ranking preservation shifting within 5% using only 200x fewer samples.

Machine unlearning aims to remove the influence of specific training samples while preserving the model's utility. Existing single-objective approaches, such as gradient ascent or random relabeling, often induce catastrophic forgetting due to conflicting optimization dynamics and unbounded forgetting objectives that cause the model to drift from its pre-trained knowledge. We propose Reference-Aligned UnLearning (RAUL), a multi-objective framework that jointly optimizes forgetting and retention by replacing unbounded loss maximization with a bounded KL alignment of predictions on forgotten samples toward a reference distribution representing unseen data, instantiated either as a uniform distribution or an empirical distribution from a held-out reference set, which constrains the forgetting objective and reduces gradient conflict with retention. The resulting multi-objective optimization (MOO) problem is solved via Jacobian descent, which aggregates multiple gradients into a direction that does not conflict. Our results demonstrate that RAUL achieves the closest gap compared to full retraining.

Evaluations of LLM systems routinely average over small prompt sets and report models as a ranked table. We ask how much confidence such a table deserves, using LLM-based prompt-structure inference as the case study: eight open model variants across five families and 8B to 675B parameters, caching disabled, 293 raw intermediate representations persisted. The measured phenomenon is unstable to begin with. Identical calls do not reliably recover identical structure, with mean node-set Jaccard from 0.39 to 0.96 and 72% of prompt-model cells never node-set-perfect. Auditing the evaluation weakens its conclusions further, and this is our main contribution. Under a joint cluster bootstrap over prompts, only the bottom of the ranking is firm: the two least reproducible models hold rank in 99% and 86% of replicates, the middle four in 27% to 48%, and the top two in 68% each, so the table identifies the worst model reliably but does not reliably identify the best. Two equally defensible rules for merging repeated campaigns change four of eight rows and move the study-wide headline by 7 percentage points. Checking the inferred structure against ground-truth annotations shows reproducibility cannot be read as accuracy. And four of the eight endpoints were withdrawn within ten weeks of measurement, so the study as specified can no longer be run. Small-sample LLM evaluations can therefore look far more definitive than their evidence supports. We recommend reporting rank stability, per-cell provenance, executed sensitivity comparisons, raw per-run outputs, and a measurement date alongside any ranking.

From a multi-model compression perspective, model merging enables memory-efficient serving of multiple models fine-tuned from the same base, but suffers from degraded performance due to interference among their task-specific parameter adjustments (i.e., deltas). In this paper, we reformulate model merging as a compress-and-retrieve scheme, revealing that the task interference arises from the summation of irrelevant deltas during model retrieval. To address this issue, we use random orthogonal transformations to decorrelate these vectors into self-cancellation. We show that this approach drastically reduces interference, improving performance across both vision and language tasks. Since these transformations are fully defined by random seeds, adding new models requires no extra memory. Further, their data- and model-agnostic nature enables easy addition or removal of models with minimal compute overhead, supporting efficient and flexible multi-model serving.

Large Language Models (LLMs) with long chain-of-thought (CoT) capability, termed Reasoning Models, demonstrate superior intricate problem-solving abilities through multi-step long CoT reasoning. To create a dual-capability model with long CoT capability and domain-specific knowledge without substantial computational and data costs, model merging emerges as a highly resource-efficient method. However, significant challenges lie in merging domain-specific LLMs with long CoT ones since nowadays merging methods suffer from reasoning capability degradation, even gibberish output and output collapse. To overcome this, we introduce RCP-Merging: Merging Long Chain-of-Thought Models with Domain-Specific Models by Considering Reasoning Capability as Prior, a novel merging framework designed to integrate domain-specific LLMs with long CoT capability, meanwhile maintaining model performance in the original domain. Treating reasoning model weights as foundational prior, our method utilizes a reasoning capability indicator to preserve core long CoT capability model weights while selectively merging essential domain-specific weights. We conducted extensive experiments on Qwen2.5-7B, Llama3.1-8B, and Qwen2.5-1.5B models in BioMedicine and Finance domains. Our results show that RCP-Merging successfully merges a reasoning model with domain-specific ones, improving domain task performance by 9.5% and 9.2% over state-of-the-art methods, without significantly harming the original long CoT reasoning capability.

Long-term memory has become a crucial component of large language model (LLM) agents, with most research focusing on retrieving relevant information accurately and efficiently. However, a dependable memory system must also forget sensitive user data upon request. To evaluate this capability, we introduce MemCut, a systematic benchmark for user-requested forgetting. Its 456 hand-designed secrets in long-horizon conversations have fully annotated evidence trails to test recovery after deletion, including from messages that never state the secrets directly. We propose two recovery metrics. Native recovery measures reader success through the system's retrieval, whereas residual recovery measures the same reader's success when directly given surviving objects traced to annotated disclosures or evidence. We establish three reference deletion baselines to test how far existing retrievers and write models support forgetting across five memory designs and four LLMs. Disclosure removal reduces native recovery far more than residual recovery. LLM-guided deletion of ten additional turns from twenty retrieval candidates leaves 39-76% residual recovery. Subset sweeps (144 facts, three systems, two models) show that widening the pool at a fixed budget reduces residual recovery more than deleting all original candidates. These sweeps identify candidate coverage as a bottleneck in the reference baselines.

Achieving balanced alignment of large language models (LLMs) in terms of Helpfulness, Honesty, and Harmlessness (3H optimization) constitutes a cornerstone of responsible AI, with existing methods like data mixture strategies facing limitations including reliance on expert knowledge and conflicting optimization signals. While model merging offers a promising alternative by integrating specialized models, its potential for 3H optimization remains underexplored. This paper establishes the first comprehensive benchmark for model merging in 3H-aligned LLMs, systematically evaluating 15 methods (12 training-free merging and 3 data mixture techniques) across 10 datasets associated with 5 annotation dimensions, 2 LLM families, and 2 training paradigms. Our analysis reveals three pivotal insights: (i) previously overlooked collaborative/conflicting relationships among 3H dimensions, (ii) the consistent superiority of model merging over data mixture approaches in balancing alignment trade-offs, and (iii) the critical role of parameter-level conflict resolution through redundant component pruning and outlier mitigation. Building on these findings, we propose R-TSVM, a Reweighting-enhanced Task Singular Vector Merging method that incorporates outlier-aware parameter weighting and sparsity-adaptive rank selection strategies adapted to the heavy-tailed parameter distribution and sparsity for LLMs, further improving LLM alignment across multiple evaluations. We release our trained models for further exploration.

Machine unlearning, the removal of a training subset's influence from a deployed model, is critical for privacy preservation and model reliability, yet gradient ascent on forget samples often harms retained knowledge. Existing approaches face a persistent tradeoff between effective forgetting and preservation on the retain set. While previous methods provide useful heuristics, they often lack a formal analysis on how exactly forgetting updates harm retained knowledge, and whether the side effects can be removed with theoretical guarantees. To explore a theoretically sound and simple solution, we start from the first principle on how performance on the retain set is actually affected: a first-order analysis of the local change of the retain loss under small parameter updates during model training. We start from a crisp equivalence: the retain loss is unchanged to first order iff the update direction is orthogonal to the subspace spanned by retain gradients ("retain-invariant"). This identifies the entangled component as the tangential part of forget update within the retain-gradient subspace, and characterizes disentanglement as orthogonality. Guided by this, we propose the Geometric-disentanglement Unlearning (GU) that decomposes any candidate forget gradient update into tangential and normal components to retain space and executes only the normal component. Under a standard trust-region budget, the projected direction aligned with the raw forget gradient is optimal among all first-order retain-invariant moves, and we also derive the optimal projected direction for joint forget-retain updating objectives. Our method is plug-and-play and can be attached to existing gradient-based unlearning procedures to mitigate side effects. GU achieves consistent improvement on various methods across three benchmarks TOFU, MUSE, and WMDP.

Low-resource deployment constraints have made model quantization essential for deploying neural networks while preserving performance. Meanwhile, model merging has become an increasingly practical low-resource strategy for integrating multiple task- or domain-specialized experts into a single model without joint training or multi-model serving. Together, quantization and model merging enable an efficient low-resource deployment pipeline by integrating multiple experts into one low-bit model. We formulate this setting as Post-Merge Quantization (PMQ). We show that directly applying post-training quantization (PTQ) to a merged model is unreliable because two distinct deviations are coupled: the quantization deviation introduced by low-bit reconstruction and the expert-relative merging deviation inherited from model merging. To mitigate these deviations, we propose E-PMQ, an expert-guided PMQ framework that uses source expert weights to provide expert- guided output targets during layer-wise calibration, together with merged-weight anchoring to stabilize the calibration and preserve the integrated behavior of the merged model. On CLIP-ViT-B/32 eight-task merging, E-PMQ improves 4-bit GPTQ from 65.0% to 73.6% under Task Arithmetic and from 69.1% to 74.8% under TIES-Merging. On harder settings, E-PMQ improves GPTQ from 34.8% to 76.7% on 20-task CLIP-ViT-L/14 and from 78.26% to 83.34% on FLAN-T5- base GLUE. These results demonstrate that E-PMQ enables effective post-merge quantization and low-bit deployment.

This paper introduces a continual learning approach named MagMax, which utilizes model merging to enable large pre-trained models to continuously learn from new data without forgetting previously acquired knowledge. Distinct from traditional continual learning methods that aim to reduce forgetting during task training, MagMax combines sequential fine-tuning with a maximum magnitude weight selection for effective knowledge integration across tasks. Our initial contribution is an extensive examination of model merging techniques, revealing that simple approaches like weight averaging and random weight selection surprisingly hold up well in various continual learning contexts. More importantly, we present MagMax, a novel model-merging strategy that enables continual learning of large pre-trained models for successive tasks. Our thorough evaluation demonstrates the superiority of MagMax in various scenarios, including class- and domain-incremental learning settings.

Long-sequence memory tracking places two opposing demands on a recurrent state: near-lossless retention of stored bindings over long horizons, and active overwriting of stale ones. In our diagnostic suite, the strongest efficient baselines tend to solve only one side well. Continuous-time-parameterized state-space models (SSMs) such as Mamba obtain their discrete recurrence by zero-order-hold discretization of a continuous-time system; we argue that this detour is unnecessary for memory tracking and parameterize the discrete transition directly. Naju (Native Adaptive Junction Unit) factorizes the recurrent update, schematically x_n = f_nodot x_{n-1} + i_nodot(B_n u_n), into an explicit discrete pole (a learned forget gate f_n), an independent write gain i_n, and input-dependent write/read maps. Since the sigmoid pole satisfies 0<f_n<1, each frozen local coordinate is Schur-stable by construction, and the full time-varying recurrence satisfies a fading-memory/BIBO bound under uniform boundedness assumptions, with no stability regularizer. We formalize the key structural limitation of coupled designs: any non-expansive complementary single-gate recurrence ties the effective retention r and write gain w through |r|+wle 1, so near-complete retention forces weak writing; decoupling f_n from i_n removes this constraint. Empirically, Naju is the only evaluated model that remains strong on both retention and overwriting at 4x the training length. Beyond the diagnostic suite, we evaluate Naju on WikiText-103 language modeling, Long Range Arena, and multi-query associative recall. Across these settings, Naju consistently combines strong long-range memory with competitive or superior performance, outperforming the Mamba baselines in the principal comparisons while remaining competitive with the Transformer and preserving linear-time, linear-memory scaling.

Recent advancements in building domain-specific large language models (LLMs) have shown remarkable success, especially in tasks requiring reasoning abilities like logical inference over complex relationships and multi-step problem solving. However, creating a powerful all-in-one LLM remains challenging due to the need for proprietary data and vast computational resources. As a resource-friendly alternative, we explore the potential of merging multiple expert models into a single LLM. Existing studies on model merging mainly focus on generalist LLMs instead of domain experts, or the LLMs under the same architecture and size. In this work, we propose an unconstrained model merging framework that accommodates both homogeneous and heterogeneous model architectures with a focus on reasoning tasks. A fine-grained layer-wise weight merging strategy is designed for homogeneous models merging, while heterogeneous model merging is built upon the probabilistic distribution knowledge derived from instruction-response fine-tuning data. Across 7 benchmarks and 9 reasoning-optimized LLMs, we reveal key findings that combinatorial reasoning emerges from merging which surpasses simple additive effects. We propose that unconstrained model merging could serve as a foundation for decentralized LLMs, marking a notable progression from the existing centralized LLM framework. This evolution could enhance wider participation and stimulate additional advancement in the field of artificial intelligence, effectively addressing the constraints posed by centralized models.