Daily Papers

Scaling depth is a key route to stronger large language models, but Pre-LN architectures often suffer from depth-wise information dilution, limiting the effective use of deep layers. While cross-layer connectivity has proven effective at mitigating this problem, existing designs usually introduce additional computation or memory access. We revisit cross-layer KV sharing as an efficient form of such connectivity. Beyond cache compression, each KV reuse edge creates a direct gradient path from deep layers to source KV projections, turning KV sharing into an implicit structural regularizer for KV representation geometry. We provide a systematic analysis of this mechanism, showing that proper sharing topologies sharpen key retrieval directions while enriching the value content subspace, whereas existing adjacent or global-anchor designs do not fully exploit this effect. Motivated by this, we propose DepthGraft, a hierarchical KV-sharing architecture that reconstructs deep-layer KV from stride-aligned shallow-middle source pairs. DepthGraft distributes non-local gradient flow across source layers, while preserving prefill early completion and reducing KV cache by roughly one third. Experiments on dense and MoE models from 0.5B to 16B parameters show consistent downstream improvements under both GQA and MLA. Notably, on the 16B MoE model, DepthGraft achieves a 7.0% absolute improvement on MMLU-Pro, along with gains of 6.6% on CMMLU and 6.4% on C3. These results validate the potential of DepthGraft as a scalable design for large-scale pretraining. The project page is available at https://github.com/jianke0604/DepthGraft.

We present a scalable 3D reconstruction model that addresses a critical limitation in offline feed-forward methods: their computational and memory requirements grow quadratically w.r.t. the number of input images. Our approach is built on the key insight that this bottleneck stems from the varying-length Key-Value (KV) space representation of scene geometry, which we distill into a fixed-size Multi-Layer Perceptron (MLP) via test-time training. VGG-T^3 (Visual Geometry Grounded Test Time Training) scales linearly w.r.t. the number of input views, similar to online models, and reconstructs a 1k image collection in just 54 seconds, achieving a 11.6times speed-up over baselines that rely on softmax attention. Since our method retains global scene aggregation capability, our point map reconstruction error outperforming other linear-time methods by large margins. Finally, we demonstrate visual localization capabilities of our model by querying the scene representation with unseen images.

Recent years have seen a surprising connection between the physics of scattering amplitudes and a class of mathematical objects--the positive Grassmannian, positive loop Grassmannians, tree and loop Amplituhedra--which have been loosely referred to as "positive geometries". The connection between the geometry and physics is provided by a unique differential form canonically determined by the property of having logarithmic singularities (only) on all the boundaries of the space, with residues on each boundary given by the canonical form on that boundary. In this paper we initiate an exploration of "positive geometries" and "canonical forms" as objects of study in their own right in a more general mathematical setting. We give a precise definition of positive geometries and canonical forms, introduce general methods for finding forms for more complicated positive geometries from simpler ones, and present numerous examples of positive geometries in projective spaces, Grassmannians, and toric, cluster and flag varieties. We also illustrate a number of strategies for computing canonical forms which yield interesting representations for the forms associated with wide classes of positive geometries, ranging from the simplest Amplituhedra to new expressions for the volume of arbitrary convex polytopes.

Let V be a highest weight module over a Kac-Moody algebra g, and let conv V denote the convex hull of its weights. We determine the combinatorial isomorphism type of conv V, i.e. we completely classify the faces and their inclusions. In the special case where g is semisimple, this brings closure to a question studied by Cellini-Marietti [IMRN 2015] for the adjoint representation, and by Khare [J. Algebra 2016; Trans. Amer. Math. Soc. 2017] for most modules. The determination of faces of finite-dimensional modules up to the Weyl group action and some of their inclusions also appears in previous work of Satake [Ann. of Math. 1960], Borel-Tits [IHES Publ. Math. 1965], Vinberg [Izv. Akad. Nauk 1990], and Casselman [Austral. Math. Soc. 1997]. For any subset of the simple roots, we introduce a remarkable convex cone which we call the universal Weyl polyhedron, which controls the convex hulls of all modules parabolically induced from the corresponding Levi factor. Namely, the combinatorial isomorphism type of the cone stores the classification of faces for all such highest weight modules, as well as how faces degenerate as the highest weight gets increasingly singular. To our knowledge, this cone is new in finite and infinite type. We further answer a question of Michel Brion, by showing that the localization of conv V along a face is always the convex hull of the weights of a parabolically induced module. Finally, as we determine the inclusion relations between faces representation-theoretically from the set of weights, without recourse to convexity, we answer a similar question for highest weight modules over symmetrizable quantum groups.

Let 1 le k le n, and let v_1,ldots,v_k be integral vectors in Z^n. We consider the wedge map α_{n,k} : (Z^n)^k /SL_k(Z) rightarrow wedge^k(Z^n), (v_1,ldots,v_k) rightarrow v_1 wedge cdots wedge v_k . In his Disquisitiones, Gauss proved that α_{n,2} is injective when restricted to a primitive system of vectors when defining his composition law for binary quadratic forms. He also gave an algorithm for inverting α_{3,2} in a different context on the representation of integers by ternary quadratic forms. We give here an explicit algorithm for inverting α_{n,2}, and observe via Bhargava's composition law for Z^2 otimes Z^2 otimes Z^2 cube that inverting α_{4,2} is the main algorithmic step in Gauss's composition law for binary quadratic forms. This places Gauss's composition as a special case of the geometric problem of inverting a wedge map which may be of independent interests. We also show that a given symmetric positive definite matrix A induces a natural metric on the integral Grassmannian G_{n,k}(Z) so that the map X rightarrow X^TAX becomes norm preserving.

We develop an equivariant K-theoretic vertex formalism for a colored, abelianized higher-rank sector on smooth projective toric threefolds X. Nonzero first Chern classes are encoded as magnetic fluxes and absorbed into line-bundle twists, after which the virtual character is redistributed into finite perturbative, vertex, and edge contributions. We compute the resulting (unreduced and trace-free) virtual dimensions and analyze the interaction terms relevant to a possible reduction to rank one. We emphasize that, on a compact toric threefold, colored partitions do not classify all torus-fixed stable higher-rank sheaves: the resulting series is therefore a proposed abelianized/framed vertex series unless an additional comparison theorem with the full stable-sheaf moduli problem is supplied. When the threefold obstruction theory is not available in the desired form, we pass to the local Calabi--Yau fourfold Y=Tot(K_X) and formulate the corresponding colored DT4 vertex. A K_X-twisted tautological insertion removes fixed points with nontrivial fiber layers, reducing solid partitions to plane partitions at the level of the local vertex. In rank one we give a scheme-theoretic explanation: the Hilbert functor of subschemes of X is canonically isomorphic to the constrained Hilbert functor of subschemes of Y lying scheme-theoretically in the fixed zero section. Under the hypotheses of the DT4 K-theoretic Lefschetz/virtual-pullback formalism, the associated support insertion reduces the rank-one fourfold theory to the threefold theory. We keep this global rank-one statement logically distinct from the higher-rank colored-vertex reduction.

We develop the GKM theory for the torus-equivariant cohomology of the affine flag variety using the combinatorics of alcove walks. Dual to the usual GKM setup, which depicts the orbits of the small torus action on a graph, alcove walks take place in tessellations of Euclidean space. Walks in affine rank two occur on triangulations of the plane, providing a more direct connection to splines used for approximating surfaces. Alcove walks in GKM theory also need not be minimal length, and can instead be randomly generated, giving rise to more flexible implementation. This work reinterprets and recovers classical results in GKM theory on the affine flag variety, generalizing them to both non-minimal and folded alcove walks, all motivated by applications to splines.

Fine, regular, and star triangulations (FRSTs) of four-dimensional reflexive polytopes give rise to toric varieties, within which generic anticanonical hypersurfaces yield smooth Calabi-Yau threefolds. We introduce CYTransformer, a deep learning model based on the transformer architecture, to automate the generation of FRSTs. We demonstrate that CYTransformer efficiently and unbiasedly samples FRSTs for polytopes across a range of sizes, and can self-improve through retraining on its own output. These results lay the foundation for AICY: a community-driven platform designed to combine self-improving machine learning models with a continuously expanding database to explore and catalog the Calabi-Yau landscape.

By interpreting the product of the Principal Component Analysis, that is the covariance matrix, as a sequence of nested subspaces naturally coming with weights according to the level of approximation they provide, we are able to embed all d--dimensional Grassmannians into a stratified space of covariance matrices. We observe that Grassmannians constitute the lowest dimensional skeleton of the stratification while it is possible to define a Riemaniann metric on the highest dimensional and dense stratum, such a metric being compatible with the global stratification. With such a Riemaniann metric at hand, it is possible to look for geodesics between two linear subspaces of different dimensions that do not go through higher dimensional linear subspaces as would euclidean geodesics. Building upon the proposed embedding of Grassmannians into the stratified space of covariance matrices, we generalize the concept of varifolds to what we call flagfolds in order to model multi-dimensional shapes.

We present an algorithm for efficiently exploring inequivalent Calabi-Yau threefold hypersurfaces in toric varieties. A direct enumeration of fine, regular, star triangulations (FRSTs) of polytopes in the Kreuzer-Skarke database is foreseeably impossible due to the large count of distinct FRSTs. Moreover, such an enumeration is needlessly redundant because many such triangulations have the same restrictions to 2-faces and hence, by Wall's theorem, lead to equivalent Calabi-Yau threefolds. We show that this redundancy can be circumvented by finding a height vector in the strict interior of the intersection of the secondary cones associated with each 2-face triangulation. We demonstrate that such triangulations are generated with orders of magnitude fewer operations than the naive approach of generating all FRSTs and selecting only those differing on 2-faces. Similar methods are also presented to directly generate (the support of) the secondary subfan of all fine triangulations, relevant for random sampling of FRSTs.

Knowledge graph embedding (KGE) is an increasingly popular technique that aims to represent entities and relations of knowledge graphs into low-dimensional semantic spaces for a wide spectrum of applications such as link prediction, knowledge reasoning and knowledge completion. In this paper, we provide a systematic review of existing KGE techniques based on representation spaces. Particularly, we build a fine-grained classification to categorise the models based on three mathematical perspectives of the representation spaces: (1) Algebraic perspective, (2) Geometric perspective, and (3) Analytical perspective. We introduce the rigorous definitions of fundamental mathematical spaces before diving into KGE models and their mathematical properties. We further discuss different KGE methods over the three categories, as well as summarise how spatial advantages work over different embedding needs. By collating the experimental results from downstream tasks, we also explore the advantages of mathematical space in different scenarios and the reasons behind them. We further state some promising research directions from a representation space perspective, with which we hope to inspire researchers to design their KGE models as well as their related applications with more consideration of their mathematical space properties.

In language models, what a representation encodes is determined by the geometry of its representation space: distances, not activations, carry meaning. Existing tools characterize the shape of this geometry but do not ask what that shape is organized for. We introduce Subspace PGA, a metric that tests whether a layer's distance structure aligns with the readout subspace of the unembedding matrix W_U more than with random subspaces of equal size. Across seven Pythia models (70M--6.9B) and three cross-family models, intermediate geometry is significantly organized for prediction (peak z = 9--24), but the degree is scale-dependent: small models (d leq 1024) progressively lose it at late layers during training -- even as loss keeps improving -- while large models (d geq 2048) preserve it throughout. We trace this to a capacity trade-off: a few dominant directions migrate away from W_U's readout, masking rather than destroying the predictive structure beneath, and removing them restores alignment. Neither spectral metrics nor loss curves capture this distinction. Scale thus determines not only how well a model predicts, but how its representation geometry is organized to do so.

We present Kernel Point Convolution (KPConv), a new design of point convolution, i.e. that operates on point clouds without any intermediate representation. The convolution weights of KPConv are located in Euclidean space by kernel points, and applied to the input points close to them. Its capacity to use any number of kernel points gives KPConv more flexibility than fixed grid convolutions. Furthermore, these locations are continuous in space and can be learned by the network. Therefore, KPConv can be extended to deformable convolutions that learn to adapt kernel points to local geometry. Thanks to a regular subsampling strategy, KPConv is also efficient and robust to varying densities. Whether they use deformable KPConv for complex tasks, or rigid KPconv for simpler tasks, our networks outperform state-of-the-art classification and segmentation approaches on several datasets. We also offer ablation studies and visualizations to provide understanding of what has been learned by KPConv and to validate the descriptive power of deformable KPConv.

We present, for the first time, a novel theoretical approach to address the problem of correspondence free multivector cloud registration in conformal geometric algebra. Such formalism achieves several favorable properties. Primarily, it forms an orthogonal automorphism that extends beyond the typical vector space to the entire conformal geometric algebra while respecting the multivector grading. Concretely, the registration can be viewed as an orthogonal transformation (\it i.e., scale, translation, rotation) belonging to SO(4,1) - group of special orthogonal transformations in conformal geometric algebra. We will show that such formalism is able to: (i) perform the registration without directly accessing the input multivectors. Instead, we use primitives or geometric objects provided by the conformal model - the multivectors, (ii) the geometric objects are obtained by solving a multilinear eigenvalue problem to find sets of eigenmultivectors. In this way, we can explicitly avoid solving the correspondences in the registration process. Most importantly, this offers rotation and translation equivariant properties between the input multivectors and the eigenmultivectors. Experimental evaluation is conducted in datasets commonly used in point cloud registration, to testify the usefulness of the approach with emphasis to ambiguities arising from high levels of noise. The code is available at https://github.com/Numerical-Geometric-Algebra/RegistrationGA . This work was submitted to the International Journal of Computer Vision and is currently under review.

Problems involving geometric data arise in a variety of fields, including computer vision, robotics, chemistry, and physics. Such data can take numerous forms, such as points, direction vectors, planes, or transformations, but to date there is no single architecture that can be applied to such a wide variety of geometric types while respecting their symmetries. In this paper we introduce the Geometric Algebra Transformer (GATr), a general-purpose architecture for geometric data. GATr represents inputs, outputs, and hidden states in the projective geometric algebra, which offers an efficient 16-dimensional vector space representation of common geometric objects as well as operators acting on them. GATr is equivariant with respect to E(3), the symmetry group of 3D Euclidean space. As a transformer, GATr is scalable, expressive, and versatile. In experiments with n-body modeling and robotic planning, GATr shows strong improvements over non-geometric baselines.

Hyperdimensional computing (HDC) is a biologically-inspired framework which represents symbols with high-dimensional vectors, and uses vector operations to manipulate them. The ensemble of a particular vector space and a prescribed set of vector operations (including one addition-like for "bundling" and one outer-product-like for "binding") form a *vector symbolic architecture* (VSA). While VSAs have been employed in numerous applications and have been studied empirically, many theoretical questions about VSAs remain open. We analyze the *representation capacities* of four common VSAs: MAP-I, MAP-B, and two VSAs based on sparse binary vectors. "Representation capacity' here refers to bounds on the dimensions of the VSA vectors required to perform certain symbolic tasks, such as testing for set membership i in S and estimating set intersection sizes |X cap Y| for two sets of symbols X and Y, to a given degree of accuracy. We also analyze the ability of a novel variant of a Hopfield network (a simple model of associative memory) to perform some of the same tasks that are typically asked of VSAs. In addition to providing new bounds on VSA capacities, our analyses establish and leverage connections between VSAs, "sketching" (dimensionality reduction) algorithms, and Bloom filters.

We introduce `dualGNN', an autoregressive message-passing GNN for sampling fine, regular triangulations (FRTs) of convex polytopes. dualGNN operates on a generalization of the dual graph of a triangulation, with edges labeled by `signed circuits' -- combinatorial invariants from oriented matroid theory which we show are both necessary and sufficient for exposing regularity. The model is independent of the number of points in the polytope and invariant under the polytope's orientation-preserving symmetries (SL(d,Z) ltimes Z^d). When implemented with a certain masking procedure, one can also guarantee that every rollout produces a fine triangulation (in 2D). On unseen polygons with N_pts leq 40, dualGNN is the most uniform FRT sampler we tested, and even a model trained on a single polygon generalizes well to other polygons. The model is small (sim92k parameters), trains in sim7.5 hours on a single consumer GPU, and runs without modification on an M1 MacBook Pro. We apply dualGNN to string theory, uniformly sampling Calabi-Yau threefolds at h^{1,1}=86 and consistent with uniformity at h^{1,1}=128. This is an order of magnitude beyond previous learned methods with a model sim1000times smaller. Code, training scripts, and pretrained models are available at https://github.com/natemacfadden/dualGNN .

We give a complete characterization of the holonomies of strictly convex cusps and of round cusps in convex projective geometry. We build families of generalized cusps of non-maximal rank associated to each strictly convex or round cusp. We also extend Ballas-Cooper-Leitner's definition of generalized cusp to allow for virtually solvable fundamental group, and we produce the first such example with non-virtually nilpotent fundamental group. Along with a companion paper, this allows to build strictly convex cusps and generalized cusps whose fundamental group is any finitely generated virtually nilpotent group. This also has interesting consequences for the theory of relatively Anosov representations.

Model dimension (d_{model}) is a fundamental hyperparameter in transformer language models, yet its role in setting the geometric limits of feature representation remains under-explored. Grounded in the Linear Representation and Superposition Hypotheses - which propose that models encode features as near-orthogonal directions in latent space - we develop a framework for estimating how many such directions a model can support. We first establish the embedding matrix as a measurable proxy for near-orthogonality constraints across the latent space: the boundary between meaningful token relationships and incidental similarity in the pairwise cosine similarity distribution gives a concrete estimate of the model's accepted deviation varepsilon from perfect orthogonality. Applying this metric across dozens of open-source models reveals two classes: models with high varepsilon whose embeddings lack near-orthogonal structure, and models with low varepsilon that maintain it. We then show that the standard Johnson-Lindenstrauss lemma greatly underestimates the packing efficiency of trained representations, and derive an adjusted capacity formula in which the number of near-orthogonal directions depends on the ratio of vectors to dimensions (k/d) rather than the raw count - a single modification that cuts prediction error by two orders of magnitude with no extra parameters. Combining these results, we define representational capacity as an upper bound on the number of distinguishable directions available for features and embeddings in a model's latent space. Capacity is exponentially sensitive to varepsilon, and larger models favor tighter orthogonality constraints over maximizing raw capacity - a pattern compatible with several explanations (a stability-capacity trade-off, a ceiling on usable concepts, or confounds with model scale) that we leave to future work.

In this paper, we study 6-dimensional GKM manifolds with 4 fixed points. We classify all possible GKM graphs, and for each type of graph we construct a manifold, proving the existence. We show that six types occur. (P1) complex projective space C P^3 with standard complex structure (P2) blow up of S^6 at a fixed point, diffeomorphic to C P^3 (P3) C P^3 as the homogeneous space Sp(2)/(U(1) times Sp(1)) with non-standard almost complex structure (Q1) complex quadric Q_3 with standard complex structure (Q2) blow up of S^6 along isotropy 2-sphere, diffeomorphic to Q_3 (S) S^2 times S^4, obtained as equivariant gluing along orbits of two S^6's

Crystal structures are characterized by atomic bases within a primitive unit cell that repeats along a regular lattice throughout 3D space. The periodic and infinite nature of crystals poses unique challenges for geometric graph representation learning. Specifically, constructing graphs that effectively capture the complete geometric information of crystals and handle chiral crystals remains an unsolved and challenging problem. In this paper, we introduce a novel approach that utilizes the periodic patterns of unit cells to establish the lattice-based representation for each atom, enabling efficient and expressive graph representations of crystals. Furthermore, we propose ComFormer, a SE(3) transformer designed specifically for crystalline materials. ComFormer includes two variants; namely, iComFormer that employs invariant geometric descriptors of Euclidean distances and angles, and eComFormer that utilizes equivariant vector representations. Experimental results demonstrate the state-of-the-art predictive accuracy of ComFormer variants on various tasks across three widely-used crystal benchmarks. Our code is publicly available as part of the AIRS library (https://github.com/divelab/AIRS).

For any {rm E}-rigid presentation e, we construct an orthogonal projection functor to {rm rep}(e^perp) left adjoint to the natural embedding. We establish a bijection between presentations in {rm rep}(e^perp) and presentations compatible with e. For quivers with potentials, we show that {rm rep}(e^perp) forms a module category of another quiver with potential. We derive mutation formulas for the delta-vectors of positive and negative complements and the dimension vectors of simple modules in {rm rep}(e^perp), enabling an algorithm to find the projected quiver with potential. Additionally, we introduce a modified projection for quivers with potentials that preserves general presentations. For applications to cluster algebras, we establish a connection to the stabilization functors.

Knowledge graph (KG) embeddings have shown great power in learning representations of entities and relations for link prediction tasks. Previous work usually embeds KGs into a single geometric space such as Euclidean space (zero curved), hyperbolic space (negatively curved) or hyperspherical space (positively curved) to maintain their specific geometric structures (e.g., chain, hierarchy and ring structures). However, the topological structure of KGs appears to be complicated, since it may contain multiple types of geometric structures simultaneously. Therefore, embedding KGs in a single space, no matter the Euclidean space, hyperbolic space or hyperspheric space, cannot capture the complex structures of KGs accurately. To overcome this challenge, we propose Geometry Interaction knowledge graph Embeddings (GIE), which learns spatial structures interactively between the Euclidean, hyperbolic and hyperspherical spaces. Theoretically, our proposed GIE can capture a richer set of relational information, model key inference patterns, and enable expressive semantic matching across entities. Experimental results on three well-established knowledge graph completion benchmarks show that our GIE achieves the state-of-the-art performance with fewer parameters.

Neural representations of 3D data have been widely adopted across various applications, particularly in recent work leveraging coordinate-based networks to model scalar or vector fields. However, these approaches face inherent challenges, such as handling thin structures and non-watertight geometries, which limit their flexibility and accuracy. In contrast, we propose a novel geometric data representation that models geometry as distributions-a powerful representation that makes no assumptions about surface genus, connectivity, or boundary conditions. Our approach uses diffusion models with a novel network architecture to learn surface point distributions, capturing fine-grained geometric details. We evaluate our representation qualitatively and quantitatively across various object types, demonstrating its effectiveness in achieving high geometric fidelity. Additionally, we explore applications using our representation, such as textured mesh representation, neural surface compression, dynamic object modeling, and rendering, highlighting its potential to advance 3D geometric learning.

A homogeneous roof is a rational homogeneous variety of Picard rank 2 and index r equipped with two different mathbb P^{r-1}-bundle structures. We consider bundles of homogeneous roofs over a smooth projective variety, formulating a relative version of the duality of Calabi--Yau pairs associated to roofs of projective bundles. We discuss how derived equivalence of such pairs can lift to Calabi--Yau fibrations, extending a result of Bridgeland and Maciocia to higher-dimensional cases. We formulate an approach to prove that the DK-conjecture holds for a class of simple K-equivalent maps arising from bundles of roofs. As an example, we propose a pair of eight-dimensional Calabi--Yau varieties fibered in dual Calabi--Yau threefolds, related by a GLSM phase transition, and we prove derived equivalence with the methods above.

We analyse three KV cache quantization schemes under a fair bit budget: KV (scalar MSE baseline), KQV (WHT + MSE on K; WHT + MSE + QJL on V), and QKQV (WHT + MSE + QJL on both). Starting from the Beta distribution on the hypersphere, we trace how QJL on K inflates inner product variance by π/2, which softmax amplifies nonlinearly via Jensen's inequality, and we present statistical inference and information metrics to highlight practical differences. Three empirical findings emerge. (1)~At n=4 (the practically dominant budget), KQV wins on every measure -- KL divergence, geometric K error, and 6D distance -- across all distributions and ranks tested. (2)~The K--V asymmetry is unconditional: QKQV is consistently worse than KQV in KL divergence at every budget and distribution. (3)~A budget-dependent crossover exists: QKQV achieves better geometric K reconstruction at n in {2,3,5}, KQV at n in {4,6}, invariant to rank and tail weight -- an open rate-distortion problem. KL(p_{ref} | p_{quant}), K-only by construction, bridges K direction error to routing corruption and output collapse. We present a sufficient condition when the Jensen mechanism amplifies superlinearly through the softmax. At n in {2,3,5}, QKQV wins geometrically because this assumption does not bind. At n=4, elevated K error and KL divergence for QKQV strongly suggest the Jensen mechanism is the operative cause of the crossover, providing a new perspective and explanation.

We introduce Clifford Group Equivariant Simplicial Message Passing Networks, a method for steerable E(n)-equivariant message passing on simplicial complexes. Our method integrates the expressivity of Clifford group-equivariant layers with simplicial message passing, which is topologically more intricate than regular graph message passing. Clifford algebras include higher-order objects such as bivectors and trivectors, which express geometric features (e.g., areas, volumes) derived from vectors. Using this knowledge, we represent simplex features through geometric products of their vertices. To achieve efficient simplicial message passing, we share the parameters of the message network across different dimensions. Additionally, we restrict the final message to an aggregation of the incoming messages from different dimensions, leading to what we term shared simplicial message passing. Experimental results show that our method is able to outperform both equivariant and simplicial graph neural networks on a variety of geometric tasks.

For any integer d geq 2 and prime power q, we construct unexpectedly large induced matchings in the point-line incidence graph of F_{q}^{d} by leveraging a new connection with the Furstenberg-Sárközy problem from arithmetic combinatorics. In particular, we significantly improve the previously well-known baselines when q is prime, showing that F_{q}^{2} contains matchings of size q^{1.233} and F_{q}^{d} contains matchings of size q^{d-o_{d}(1)}. These results and their proofs have several applications. First, we also obtain new constructions for finite field Nikodym sets in dimension d geq 2, improving recent results of Tao by polynomial factors. For example, when q is prime, we show the existence of Nikodym sets in F_q^d of size q^d - q^{d - o_d(1)}. Second, we construct a new minimal blocking set in PG(2,q), solving a longstanding problem in finite geometry. Third, we obtain new constructions for the minimal distance problem (in R^{2} and also in higher dimensions), improving a recent result of Logunov-Zakharov. We also obtain analogous results for general finite fields with large characteristics. In particular, in one of our constructions we introduce a new special set of points inside the norm hypersurface in F_{q}^{d}, which directly generalizes the classical Hermitian unital and which may be of independent interest for applications.

Many geometric learning problems require invariants on heterogeneous product spaces, i.e., products of distinct spaces carrying different group actions, where standard techniques do not directly apply. We show that, when a group G acts transitively on a space M, any G-invariant function on a product space X times M can be reduced to an invariant of the isotropy subgroup H of M acting on X alone. Our approach establishes an explicit orbit equivalence (X times M)/G cong X/H, yielding a principled reduction that preserves expressivity. We apply this characterization to Equivariant Neural Fields, extending them to arbitrary group actions and homogeneous conditioning spaces, and thereby removing the major structural constraints imposed by existing methods.

Large language models have seen widespread adoption in math problem-solving. However, in geometry problems that usually require visual aids for better understanding, even the most advanced multi-modal models currently still face challenges in effectively using image information. High-quality data is crucial for enhancing the geometric capabilities of multi-modal models, yet existing open-source datasets and related efforts are either too challenging for direct model learning or suffer from misalignment between text and images. To overcome this issue, we introduce a novel pipeline that leverages GPT-4 and GPT-4V to generate relatively basic geometry problems with aligned text and images, facilitating model learning. We have produced a dataset of 4.9K geometry problems and combined it with 19K open-source data to form our GeoGPT4V dataset. Experimental results demonstrate that the GeoGPT4V dataset significantly improves the geometry performance of various models on the MathVista and MathVision benchmarks. The code is available at https://github.com/Lanyu0303/GeoGPT4V_Project

Invariance and equivariance to geometrical transformations have proven to be very useful inductive biases when training (convolutional) neural network models, especially in the low-data regime. Much work has focused on the case where the symmetry group employed is compact or abelian, or both. Recent work has explored enlarging the class of transformations used to the case of Lie groups, principally through the use of their Lie algebra, as well as the group exponential and logarithm maps. The applicability of such methods to larger transformation groups is limited by the fact that depending on the group of interest G, the exponential map may not be surjective. Further limitations are encountered when G is neither compact nor abelian. Using the structure and geometry of Lie groups and their homogeneous spaces, we present a framework by which it is possible to work with such groups primarily focusing on the Lie groups G = GL^{+}(n, R) and G = SL(n, R), as well as their representation as affine transformations R^{n} rtimes G. Invariant integration as well as a global parametrization is realized by decomposing the `larger` groups into subgroups and submanifolds which can be handled individually. Under this framework, we show how convolution kernels can be parametrized to build models equivariant with respect to affine transformations. We evaluate the robustness and out-of-distribution generalisation capability of our model on the standard affine-invariant benchmark classification task, where we outperform all previous equivariant models as well as all Capsule Network proposals.

Let λ_{mathbb K}(m) denote the maximal absolute projection constant among m-dimensional Banach spaces over mathbb K=mathbb R or mathbb C. Its exact value is known only in a few cases, and determining it remains a challenging problem. In this note, we investigate several structured vector configurations that naturally arise in this context. We first recall the connection between maximal projection constants and tight frames, then consider biangular tight frames, and show that their relative and quasimaximal projection constants coincide. A particularly interesting example is provided by the midpoints of the edges of a regular simplex, which yield natural lower bounds for λ_{mathbb R}(m). Numerical evidence suggests that these bounds may be sharp in dimensions 6 and 8. We also discuss weighted spherical (2,2)-designs with a small number of vectors and their connection with maximal projection constants. Examples in dimensions 4 and 5 indicate that the sign patterns of their Gram matrices may play an important role. These observations lead us to formulate several conjectures concerning maximal absolute projection constants and the vector configurations associated with them.

Conformal symmetries, i.e.\ coordinate transformations that preserve angles, play a key role in many fields, including physics, mathematics, computer vision and (geometric) machine learning. Here we build a neural network that is equivariant under general conformal transformations. To achieve this, we lift data from flat Euclidean space to Anti de Sitter (AdS) space. This allows us to exploit a known correspondence between conformal transformations of flat space and isometric transformations on the AdS space. We then build upon the fact that such isometric transformations have been extensively studied on general geometries in the geometric deep learning literature. We employ message-passing layers conditioned on the proper distance, yielding a computationally efficient framework. We validate our model on tasks from computer vision and statistical physics, demonstrating strong performance, improved generalization capacities, and the ability to extract conformal data such as scaling dimensions from the trained network.

Despite their empirical success, pushing Transformer architectures to extreme depth often leads to a paradoxical failure: representations become increasingly redundant, lose rank, and ultimately collapse. Existing explanations largely attribute this phenomenon to optimization instability or vanishing gradients, yet such accounts fail to explain why collapse persists even under modern normalization and initialization schemes. In this paper, we argue that the collapse of deep Transformers is fundamentally a geometric problem. Standard residual updates implicitly assume that feature accumulation is always beneficial, but offer no mechanism to constrain update directions or to erase outdated information. As depth increases, this leads to systematic drift off the semantic manifold and monotonic feature accumulation, causing representational degeneracy. We propose a unified geometric framework that addresses these failures through two orthogonal principles. First, manifold-constrained hyper-connections restrict residual updates to valid local tangent directions, preventing uncontrolled manifold drift. Second, deep delta learning introduces data-dependent, non-monotonic updates that enable reflection and erasure of redundant features rather than their unconditional accumulation. Together, these mechanisms decouple the direction and sign of feature updates, yielding a stable geometric evolution across depth. We term the resulting architecture the Manifold-Geometric Transformer (MGT). Our analysis predicts that enforcing geometric validity while allowing dynamic erasure is essential for avoiding rank collapse in ultra-deep networks. We outline an evaluation protocol for Transformers exceeding 100 layers to test the hypothesis that geometry, rather than depth itself, is the key limiting factor in deep representation learning.

Learning Bird's Eye View (BEV) representation from surrounding-view cameras is of great importance for autonomous driving. In this work, we propose a Geometry-guided Kernel Transformer (GKT), a novel 2D-to-BEV representation learning mechanism. GKT leverages the geometric priors to guide the transformer to focus on discriminative regions and unfolds kernel features to generate BEV representation. For fast inference, we further introduce a look-up table (LUT) indexing method to get rid of the camera's calibrated parameters at runtime. GKT can run at 72.3 FPS on 3090 GPU / 45.6 FPS on 2080ti GPU and is robust to the camera deviation and the predefined BEV height. And GKT achieves the state-of-the-art real-time segmentation results, i.e., 38.0 mIoU (100mtimes100m perception range at a 0.5m resolution) on the nuScenes val set. Given the efficiency, effectiveness, and robustness, GKT has great practical values in autopilot scenarios, especially for real-time running systems. Code and models will be available at https://github.com/hustvl/GKT.

We characterise sets of points of exceptional Lie incidence geometries, that is, the natural geometries arising from spherical buildings of exceptional types F_4, E_6, E_7, E_8 and G_2, that form a line using the opposition relation. With that, we obtain a classification of so-called ``geometric lines'' in many of these geometries. Furthermore, our results lead to a characterisation of geometric lines in finite exceptional Lie incidence geometries as minimal blocking sets, that is, point sets of the size of a line admitting no object opposite to all of their members, in most cases, and we classify all exceptions. As a further consequence, we obtain a characterisation of automorphisms of exceptional spherical buildings as certain opposition preserving maps.

We provide a construction for categorical representation learning and introduce the foundations of "categorifier". The central theme in representation learning is the idea of everything to vector. Every object in a dataset S can be represented as a vector in R^n by an encoding map E: Obj(S)toR^n. More importantly, every morphism can be represented as a matrix E: Hom(S)toR^{n}_{n}. The encoding map E is generally modeled by a deep neural network. The goal of representation learning is to design appropriate tasks on the dataset to train the encoding map (assuming that an encoding is optimal if it universally optimizes the performance on various tasks). However, the latter is still a set-theoretic approach. The goal of the current article is to promote the representation learning to a new level via a category-theoretic approach. As a proof of concept, we provide an example of a text translator equipped with our technology, showing that our categorical learning model outperforms the current deep learning models by 17 times. The content of the current article is part of the recent US patent proposal (patent application number: 63110906).

Knowledge distillation compresses large teachers into smaller students, but performance saturates at a loss floor that persists across training methods and objectives. We argue this floor is geometric: neural networks represent far more features than dimensions through superposition, and a student of width d_S can encode at most d_S cdot g(α) features, where g(α) = 1/((1-α)ln1{1-α}) is a sparsity-dependent capacity function. Features beyond this budget are permanently lost, yielding an importance-weighted loss floor. We validate on a toy model (48 configurations, median accuracy >93%) and on Pythia-410M, where sparse autoencoders measure F approx 28{,}700 features at αapprox 0.992 (critical width d_S^* approx 1{,}065). Distillation into five student widths confirms the predicted monotonic floor ordering. The observed floor decomposes into a geometric component and a width-independent architectural baseline (R^2 = 0.993). Linear probing shows coarse concepts survive even 88% feature loss, revealing the floor arises from aggregate loss of fine-grained features in the importance distribution's long tail. Our results connect representation geometry to distillation limits and provide a practical tool for predicting distillation performance from SAE measurements alone.

Representational similarity methods compare the geometries of neural representations, but they do not measure how consistently the geometry of a single representation is recovered from subsets of its feature coordinates. We call this property geometric stability and introduce Shesha, which estimates it by correlating representational dissimilarity matrices from complementary random feature subsets. Shesha is not invariant to orthogonal rotations: representations with identical Gram matrices, and therefore identical linear CKA, can have different geometric stability. Controlled transformations further separate the quantities. Across 2{,}463 encoder configurations spanning seven domains, similarity and stability are positively associated across non-PCA transformations (ρ=+0.75) but negatively associated under PCA-coordinate compression (ρ=-0.47). We further evaluate 170 pretrained vision models across six datasets. DINOv2 combines strong transfer performance with bottom-quartile stability on five of six datasets, showing that transferability and feature-split stability need not coincide. Across random feature subsets, the marginal relationship between Shesha and linear-probe variability is dataset-dependent; after controlling for task alignment with LogME, higher Shesha is associated with lower variability on five of six datasets. These results identify geometric stability as a basis-dependent property that complements representational similarity and task alignment.

Although polygon meshes have been a standard representation in geometry processing, their irregular and combinatorial nature hinders their suitability for learning-based applications. In this work, we introduce a novel learnable mesh representation through a set of local 3D sample Points and their associated Normals and Quadric error metrics (QEM) w.r.t. the underlying shape, which we denote PoNQ. A global mesh is directly derived from PoNQ by efficiently leveraging the knowledge of the local quadric errors. Besides marking the first use of QEM within a neural shape representation, our contribution guarantees both topological and geometrical properties by ensuring that a PoNQ mesh does not self-intersect and is always the boundary of a volume. Notably, our representation does not rely on a regular grid, is supervised directly by the target surface alone, and also handles open surfaces with boundaries and/or sharp features. We demonstrate the efficacy of PoNQ through a learning-based mesh prediction from SDF grids and show that our method surpasses recent state-of-the-art techniques in terms of both surface and edge-based metrics.

A reliable language model should be able to signal, prior to generation, when a query falls outside its knowledge. We investigate whether representation geometry can provide such a pre-generation signal by measuring the deviation of hidden states from an answerable reference set, requiring no labeled failure data and no access to model outputs. Across three instruction-tuned models (Llama 3.1-8B, Qwen 2.5-7B, and Mistral-7B-Instruct) and three prompt forms (Math, Fact, Code), we find that geometry primarily encodes task form. Within mathematical prompts, unanswerable inputs consistently deviate from the answerable centroid, yielding strong separation (ROC-AUC 0.78-0.84). This single-pass pre-generation signal outperforms a simple refusal baseline and compares favorably to self-consistency. It also captures cases where models do not explicitly refuse. In contrast, no reliable geometric signal emerges for factual prompts, indicating that the effect is form-conditional rather than universal. Code prompts show large effect sizes with higher variance, suggesting partial generalization beyond mathematical form. A layer-wise analysis reveals that the signal arises in early layers and gradually attenuates toward the output. These results suggest that answerability-related geometry is established before the final stages of generation. Together, these findings indicate that geometric deviation can serve as a lightweight pre-generation signal that is reliable in structured domains with formal answerability constraints, with clear boundaries on where it generalizes.

We develop a modular wall crossing theory for quasimaps to a projective variety, allowing independent variation of the boundary coefficients and the quasimap weight. Building on the K-stability of quasimaps introduced by Hashizume and the first author, we construct projective moduli spaces in the stable, Calabi--Yau, and log Fano regimes, together with wall crossing morphisms. A central construction is the moduli theory of boundary polarized Calabi--Yau quasimaps, which retains an ample polarization at the numerically trivial locus and allows comparison with suitable perturbations toward the stable and log Fano regions. The stable theory applies in arbitrary genus, while the comparisons through the Calabi--Yau locus concern genus zero. For degree-one boundary divisors, the resulting framework relates weighted stable maps and quasimaps to Hassett spaces and GIT quotients of weighted points on mathbb P^1. In a companion paper, we apply this framework to give a modular interpolation between Miranda's GIT compactification of rational elliptic surfaces and the Baily--Borel compactification of an eight-dimensional ball quotient.

This paper develops a hierarchical clustering algorithm for weighted projective spaces P_{q}, utilizing a Finsler metric d_F([z], [w]) and its rational analogue d_{F,Q}([z], [w]) to define distances that preserve the non-Euclidean geometry of these quotient manifolds. Defined via geodesic integrals of a scaling invariant Finsler norm weighted by the grades q = (q_0, q_1, dots, q_n), these metrics satisfy true metric properties including the triangle inequality, overcoming the limitations of the non-metric dissimilarity measure from prior work.

Compositional generalization, the ability to recognize familiar parts in novel contexts, is a defining property of intelligent systems. Although modern models are trained on massive datasets, they still cover only a tiny fraction of the combinatorial space of possible inputs, raising the question of what structure representations must have to support generalization to unseen combinations. We formalize three desiderata for compositional generalization under standard training (divisibility, transferability, stability) and show they impose necessary geometric constraints: representations must decompose linearly into per-concept components, and these components must be orthogonal across concepts. This provides theoretical grounding for the Linear Representation Hypothesis: the linear structure widely observed in neural representations is a necessary consequence of compositional generalization. We further derive dimension bounds linking the number of composable concepts to the embedding geometry. Empirically, we evaluate these predictions across modern vision models (CLIP, SigLIP, DINO) and find that representations exhibit partial linear factorization with low-rank, near-orthogonal per-concept factors, and that the degree of this structure correlates with compositional generalization on unseen combinations. As models continue to scale, these conditions predict the representational geometry they may converge to. Code is available at https://github.com/oshapio/necessary-compositionality.

In statistics, independent, identically distributed random samples do not carry a natural ordering, and their statistics are typically invariant with respect to permutations of their order. Thus, an n-sample in a space M can be considered as an element of the quotient space of M^n modulo the permutation group. The present paper takes this definition of sample space and the related concept of orbit types as a starting point for developing a geometric perspective on statistics. We aim at deriving a general mathematical setting for studying the behavior of empirical and population means in spaces ranging from smooth Riemannian manifolds to general stratified spaces. We fully describe the orbifold and path-metric structure of the sample space when M is a manifold or path-metric space, respectively. These results are non-trivial even when M is Euclidean. We show that the infinite sample space exists in a Gromov-Hausdorff type sense and coincides with the Wasserstein space of probability distributions on M. We exhibit Fr\'echet means and k-means as metric projections onto 1-skeleta or k-skeleta in Wasserstein space, and we define a new and more general notion of polymeans. This geometric characterization via metric projections applies equally to sample and population means, and we use it to establish asymptotic properties of polymeans such as consistency and asymptotic normality.

In the realm of vision models, the primary mode of representation is using pixels to rasterize the visual world. Yet this is not always the best or unique way to represent visual content, especially for designers and artists who depict the world using geometry primitives such as polygons. Vector graphics (VG), on the other hand, offer a textual representation of visual content, which can be more concise and powerful for content like cartoons or sketches. Recent studies have shown promising results on processing vector graphics with capable Large Language Models (LLMs). However, such works focus solely on qualitative results, understanding, or a specific type of vector graphics. We propose VGBench, a comprehensive benchmark for LLMs on handling vector graphics through diverse aspects, including (a) both visual understanding and generation, (b) evaluation of various vector graphics formats, (c) diverse question types, (d) wide range of prompting techniques, (e) under multiple LLMs. Evaluating on our collected 4279 understanding and 5845 generation samples, we find that LLMs show strong capability on both aspects while exhibiting less desirable performance on low-level formats (SVG). Both data and evaluation pipeline will be open-sourced at https://vgbench.github.io.

Polygon representation learning is essential for diverse applications, encompassing tasks such as shape coding, building pattern classification, and geographic question answering. While recent years have seen considerable advancements in this field, much of the focus has been on single polygons, overlooking the intricate inner- and inter-polygonal relationships inherent in multipolygons. To address this gap, our study introduces a comprehensive framework specifically designed for learning representations of polygonal geometries, particularly multipolygons. Central to our approach is the incorporation of a heterogeneous visibility graph, which seamlessly integrates both inner- and inter-polygonal relationships. To enhance computational efficiency and minimize graph redundancy, we implement a heterogeneous spanning tree sampling method. Additionally, we devise a rotation-translation invariant geometric representation, ensuring broader applicability across diverse scenarios. Finally, we introduce Multipolygon-GNN, a novel model tailored to leverage the spatial and semantic heterogeneity inherent in the visibility graph. Experiments on five real-world and synthetic datasets demonstrate its ability to capture informative representations for polygonal geometries. Code and data are available at https://github.com/dyu62/PolyGNN{github.com/dyu62/PolyGNN}.

We investigate the relationship between representation geometry and neural network performance. Analyzing 52 pretrained ImageNet models across 13 architecture families, we show that effective dimension -- an unsupervised geometric metric -- strongly predicts accuracy. Output effective dimension achieves partial r=0.75 (p < 10^(-10)) after controlling for model capacity, while total compression achieves partial r=-0.72. These findings replicate across ImageNet and CIFAR-10, and generalize to NLP: effective dimension predicts performance for 8 encoder models on SST-2/MNLI and 15 decoder-only LLMs on AG News (r=0.69, p=0.004), while model size does not (r=0.07). We establish bidirectional causality: degrading geometry via noise causes accuracy loss (r=-0.94, p < 10^(-9)), while improving geometry via PCA maintains accuracy across architectures (-0.03pp at 95% variance). This relationship is noise-type agnostic -- Gaussian, Uniform, Dropout, and Salt-and-pepper noise all show |r| > 0.90. These results establish that effective dimension provides domain-agnostic predictive and causal information about neural network performance, computed entirely without labels.

In recent years, 3D Gaussian splatting has emerged as a powerful technique for 3D reconstruction and generation, known for its fast and high-quality rendering capabilities. To address these shortcomings, this paper introduces a novel diffusion-based framework, GVGEN, designed to efficiently generate 3D Gaussian representations from text input. We propose two innovative techniques:(1) Structured Volumetric Representation. We first arrange disorganized 3D Gaussian points as a structured form GaussianVolume. This transformation allows the capture of intricate texture details within a volume composed of a fixed number of Gaussians. To better optimize the representation of these details, we propose a unique pruning and densifying method named the Candidate Pool Strategy, enhancing detail fidelity through selective optimization. (2) Coarse-to-fine Generation Pipeline. To simplify the generation of GaussianVolume and empower the model to generate instances with detailed 3D geometry, we propose a coarse-to-fine pipeline. It initially constructs a basic geometric structure, followed by the prediction of complete Gaussian attributes. Our framework, GVGEN, demonstrates superior performance in qualitative and quantitative assessments compared to existing 3D generation methods. Simultaneously, it maintains a fast generation speed (sim7 seconds), effectively striking a balance between quality and efficiency.

This paper concerns the question of how AI systems encode semantic structure into the geometric structure of their representation spaces. The motivating observation of this paper is that the natural geometry of these representation spaces should reflect the way models use representations to produce behavior. We focus on the important special case of representations that define softmax distributions. In this case, we argue that the natural geometry is information geometry. Our focus is on the role of information geometry on semantic encoding and the linear representation hypothesis. As an illustrative application, we develop "dual steering", a method for robustly steering representations to exhibit a particular concept using linear probes. We prove that dual steering optimally modifies the target concept while minimizing changes to off-target concepts. Empirically, we find that dual steering enhances the controllability and stability of concept manipulation.

Design of neural networks that incorporate symmetry is crucial for geometric deep learning. Central to this effort is the development of invariant and equivariant operations. This works presents a systematic method for constructing valid invariant and equivariant operations. It can handle inputs and outputs in the form of Cartesian tensors with different rank, as well as spherical tensors with different types. In addition, our method features a graphical representation utilizing the symmetric tensor network, which simplifies both the proofs and constructions related to invariant and equivariant functions. We also apply this approach to design the equivariant interaction message for the geometry graph neural network, and equivariant machine learning model to learn the constitutive law of materials.

The solution of Shareshian-Wachs conjecture by Brosnan-Chow and Guay-Paquet tied the graded chromatic symmetric functions on indifference graphs (or unit interval graphs) and the cohomology of regular semisimple Hessenberg varieties with the dot action. A similar result holds between unicellular LLT polynomials and twins of regular semisimple Hessenberg varieties. A recent result by Abreu-Nigro enabled us to prove these results by showing the modular law for the geometrical objects, and this is indeed done by Precup-Sommers and Kiem-Lee. In this paper, we give elementary and simpler proofs to the modular law through GKM theory.

Relative representations are an established approach to zero-shot model stitching, consisting of a non-trainable transformation of the latent space of a deep neural network. Based on insights of topological and geometric nature, we propose two improvements to relative representations. First, we introduce a normalization procedure in the relative transformation, resulting in invariance to non-isotropic rescalings and permutations. The latter coincides with the symmetries in parameter space induced by common activation functions. Second, we propose to deploy topological densification when fine-tuning relative representations, a topological regularization loss encouraging clustering within classes. We provide an empirical investigation on a natural language task, where both the proposed variations yield improved performance on zero-shot model stitching.

As models and data scale, independently trained networks often induce analogous notions of similarity. But, matching similarities is weaker than establishing an explicit correspondence between the representation spaces, especially for multimodal models, where consistency must hold not only within each modality, but also for the learned image-text coupling. We therefore ask: given two independently trained multimodal contrastive models (with encoders (f, g) and (f,g)) -- trained on different distributions and with different architectures -- does a systematic geometric relationship exist between their embedding spaces? If so, what form does it take, and does it hold uniformly across modalities? In this work, we show that across model families such as CLIP, SigLIP, and FLAVA, this geometric relationship is well approximated by an orthogonal map (up to a global mean shift), i.e., there exists an orthogonal map Q where Q^top Q = I such that f(x)approx Q f(x) for paired images x. Strikingly, the same Q simultaneously aligns the text encoders i.e., g(y)approx Q g(y) for texts y. Theoretically, we prove that if the multimodal kernel agrees across models on a small anchor set i.e. langle f(x), g(y)rangle approx langle f(x), g(y)rangle, then the two models must be related by a single orthogonal map Q and the same Q maps images and text across models. More broadly, this finding enables backward-compatible model upgrades, avoiding costly re-embedding, and has implications for the privacy of learned representations. Our project page: https://canonical-multimodal.github.io/

We introduce Equivariant Neural Eikonal Solvers, a novel framework that integrates Equivariant Neural Fields (ENFs) with Neural Eikonal Solvers. Our approach employs a single neural field where a unified shared backbone is conditioned on signal-specific latent variables - represented as point clouds in a Lie group - to model diverse Eikonal solutions. The ENF integration ensures equivariant mapping from these latent representations to the solution field, delivering three key benefits: enhanced representation efficiency through weight-sharing, robust geometric grounding, and solution steerability. This steerability allows transformations applied to the latent point cloud to induce predictable, geometrically meaningful modifications in the resulting Eikonal solution. By coupling these steerable representations with Physics-Informed Neural Networks (PINNs), our framework accurately models Eikonal travel-time solutions while generalizing to arbitrary Riemannian manifolds with regular group actions. This includes homogeneous spaces such as Euclidean, position-orientation, spherical, and hyperbolic manifolds. We validate our approach through applications in seismic travel-time modeling of 2D, 3D, and spherical benchmark datasets. Experimental results demonstrate superior performance, scalability, adaptability, and user controllability compared to existing Neural Operator-based Eikonal solver methods.

We develop information geometric techniques to understand the representations learned by deep networks when they are trained on different tasks using supervised, meta-, semi-supervised and contrastive learning. We shed light on the following phenomena that relate to the structure of the space of tasks: (1) the manifold of probabilistic models trained on different tasks using different representation learning methods is effectively low-dimensional; (2) supervised learning on one task results in a surprising amount of progress even on seemingly dissimilar tasks; progress on other tasks is larger if the training task has diverse classes; (3) the structure of the space of tasks indicated by our analysis is consistent with parts of the Wordnet phylogenetic tree; (4) episodic meta-learning algorithms and supervised learning traverse different trajectories during training but they fit similar models eventually; (5) contrastive and semi-supervised learning methods traverse trajectories similar to those of supervised learning. We use classification tasks constructed from the CIFAR-10 and Imagenet datasets to study these phenomena.

We study the task of panoptic symbol spotting, which involves identifying both individual instances of countable things and the semantic regions of uncountable stuff in computer-aided design (CAD) drawings composed of vector graphical primitives. Existing methods typically rely on image rasterization, graph construction, or point-based representation, but these approaches often suffer from high computational costs, limited generality, and loss of geometric structural information. In this paper, we propose VecFormer, a novel method that addresses these challenges through line-based representation of primitives. This design preserves the geometric continuity of the original primitive, enabling more accurate shape representation while maintaining a computation-friendly structure, making it well-suited for vector graphic understanding tasks. To further enhance prediction reliability, we introduce a Branch Fusion Refinement module that effectively integrates instance and semantic predictions, resolving their inconsistencies for more coherent panoptic outputs. Extensive experiments demonstrate that our method establishes a new state-of-the-art, achieving 91.1 PQ, with Stuff-PQ improved by 9.6 and 21.2 points over the second-best results under settings with and without prior information, respectively, highlighting the strong potential of line-based representation as a foundation for vector graphic understanding.

We present an algorithm that constructs Calabi-Yau threefold orientifolds and their F-theory uplifts to elliptically-fibered Calabi-Yau fourfolds, embedded in toric varieties at codimension one and two respectively. The resulting Calabi-Yau fourfolds arise from triangulations of 6d reflexive polytopes -- which our method constructs from orientifold data -- and are smooth away from isolated terminal singularities. For many of our fourfolds, the construction of the mirror manifold is immediate, enabling the computation of fourfold periods, and thus the seven-brane superpotential. We present multiple examples that demonstrate these capabilities. Our algorithms work with CYTools and are available through a GitHub repository.

Covariance matrices have proven highly effective across many scientific fields. Since these matrices lie within the Symmetric Positive Definite (SPD) manifold - a Riemannian space with intrinsic non-Euclidean geometry, the primary challenge in representation learning is to respect this underlying geometric structure. Drawing inspiration from the success of Euclidean deep learning, researchers have developed neural networks on the SPD manifolds for more faithful covariance embedding learning. A notable advancement in this area is the implementation of Riemannian batch normalization (RBN), which has been shown to improve the performance of SPD network models. Nonetheless, the Riemannian metric beneath the existing RBN might fail to effectively deal with the ill-conditioned SPD matrices (ICSM), undermining the effectiveness of RBN. In contrast, the Bures-Wasserstein metric (BWM) demonstrates superior performance for ill-conditioning. In addition, the recently introduced Generalized BWM (GBWM) parameterizes the vanilla BWM via an SPD matrix, allowing for a more nuanced representation of vibrant geometries of the SPD manifold. Therefore, we propose a novel RBN algorithm based on the GBW geometry, incorporating a learnable metric parameter. Moreover, the deformation of GBWM by matrix power is also introduced to further enhance the representational capacity of GBWM-based RBN. Experimental results on different datasets validate the effectiveness of our proposed method.

We study the relation between equal-weight circle quadrature, Gauss--Chebyshev quadrature, and planar Minkowski reconstruction. The regular N-point grid is an mathbb S^1-design of strength N-1; a half-step rotation of the 2M-point grid projects to the classical M-point Gauss--Chebyshev rule. A common family of quadrature-error functionals gives exact identities for integration error, mixed-area error, and support-function error. For Nge3, the centered Minkowski polygon P_N with perimeter 2π has the exact Hausdorff distance from the unit disk B^2 \[ d_H(P_N,B^2)=1-\fracπ{N}\cot\fracπ{N} =π^2{3N^2}+O(N^{-4}). \] With Steiner centering, we obtain d_H(K_μ,K_ν)leπW_1(μ,ν) for balanced, nondegenerate probability measures, where W_1 uses geodesic distance. Its exponent is sharp even for smooth positive densities near the uniform measure. The identity W_1(ν_N,σ)=π/(2N) yields a general O(N^{-1}) bound for the regular grid. The sharper O(N^{-2}) rate follows from the sparse discrepancy spectrum and the inverse multiplier (1-k^2)^{-1}. Finally, a perturbation estimate gives sufficient conditions for preserving the quadratic rate and its leading constant.

Spatial graphs provide a lightweight and elegant representation of curvilinear anatomical structures such as blood vessels, lung airways, and neuronal networks. Accurately modeling these graphs is crucial in clinical and (bio-)medical research. However, the high spatial resolution of large networks drastically increases their complexity, resulting in significant computational challenges. In this work, we aim to tackle these challenges by proposing VesselTok, a framework that approaches spatially dense graphs from a parametric shape perspective to learn latent representations (tokens). VesselTok leverages centerline points with a pseudo radius to effectively encode tubular geometry. Specifically, we learn a novel latent representation conditioned on centerline points to encode neural implicit representations of vessel-like, tubular structures. We demonstrate VesselTok's performance across diverse anatomies, including lung airways, lung vessels, and brain vessels, highlighting its ability to robustly encode complex topologies. To prove the effectiveness of VesselTok's learnt latent representations, we show that they (i) generalize to unseen anatomies, (ii) support generative modeling of plausible anatomical graphs, and (iii) transfer effectively to downstream inverse problems, such as link prediction.

KV-cache memory is a major bottleneck in real-world LLM serving, where systems must simultaneously support latency-sensitive small-batch requests and high-throughput concurrent workloads. Although many KV-cache compression methods improve offline accuracy or compression ratio, they often violate practical serving constraints such as paged memory layouts, regular memory access, and fused attention execution, limiting their effectiveness in deployment. In this work, we identify the minimal set of 4-bit KV-cache quantization methods that remain viable under these constraints. Our central finding is that a simple design--token-wise INT4 quantization with block-diagonal Hadamard rotation--consistently achieves the best accuracy-efficiency trade-off. Across multiple models and benchmarks, this approach recovers nearly all of the accuracy lost by naive INT4, while more complex methods such as vector quantization and Hessian-aware quantization provide only marginal additional gains once serving compatibility is taken into account. To make this practical, we implement a fused rotation-quantization kernel that integrates directly into paged KV-cache layouts and introduces zero measurable end-to-end overhead, matching plain INT4 throughput across concurrency levels. Our results show that effective KV-cache compression is fundamentally a systems co-design problem: under real serving constraints, lightweight block-diagonal Hadamard rotation is a viable method that delivers near-lossless accuracy without sacrificing serving efficiency.

Two geometric spaces are in the same topological class if they are related by certain geometric deformations. We propose machine learning methods that automate learning of topological invariance and apply it in the context of knot theory, where two knots are equivalent if they are related by ambient space isotopy. Specifically, given only the knot and no information about its topological invariants, we employ contrastive and generative machine learning techniques to map different representatives of the same knot class to the same point in an embedding vector space. An auto-regressive decoder Transformer network can then generate new representatives from the same knot class. We also describe a student-teacher setup that we use to interpret which known knot invariants are learned by the neural networks to compute the embeddings, and observe a strong correlation with the Goeritz matrix in all setups that we tested. We also develop an approach to resolving the Jones Unknot Conjecture by exploring the vicinity of the embedding space of the Jones polynomial near the locus where the unknots cluster, which we use to generate braid words with simple Jones polynomials.

We present a continuous geometric framework that models the discrete algebraic operations of the Transformer architecture as an integro-differential equation (IDE) on a semantic fiber bundle calE = calM times R^d. Beginning from a single geometric axiom -- that the token sequence forms a discrete 1-manifold equipped with a canonical measure lattice -- we translate every core component of the modern Transformer (RMSNorm, RoPE, Softmax Attention, FFN, Residual Stream, SGD, Weight Decay) into a cohesive vocabulary of differential geometry, measure theory, and stochastic calculus. The resulting framework yields quantitative predictions spanning entropic optimal transport (Attention as a Schrödinger bridge) and non-equilibrium thermodynamics (SGD as Itô diffusion violating detailed balance). We conduct a six-part experimental campaign across five architectures (Qwen3, LLaMA\nobreakdash-3.1, Gemma\nobreakdash-3, GPT-2, Mistral) spanning 124M to 8B parameters. The empirical observables are quantitatively consistent with the geometric predictions: the ε^{-1/2} Lipschitz scaling calibration at machine precision (R^2 = 1.000), the Lie--Trotter operator-splitting torsion, the symmetric ablation instability confirming the Dual-Law of Topological Stability, the calO(1/k) thermodynamic suppression of Poincaré recurrence on the RoPE torus, the thermodynamic context-limit phase transition, and the Non-Equilibrium Steady State parameter vortex -- verified across two optimizers (AdamW and Pure SGD) to exclude momentum artifacts. The results demonstrate that analyzing Transformers through the lens of continuous stochastic differential geometry provides a predictive descriptive vocabulary for the stability limits, context bounds, and optimization dynamics of Large Language Models.

Geometric foundation models, such as the Visual Geometry Grounded Transformer (VGGT), provide strong 3D priors from unposed images. However, such models operate purely in a feed-forward, deterministic regime, \ie~they cannot generate plausible geometry beyond what the input views directly support. Generative models for 3D scenes, on the other hand, must rely on strong geometric priors to produce coherent outputs from sparse inputs. We bridge these two paradigms by performing flow matching directly in VGGT's latent space, leveraging its learned 3D priors without committing to any explicit downstream representation such as Gaussians, meshes, or video-VAE latents. This requires respecting the latent geometry: VGGT tokens occupy a product of high-dimensional hyperspheres on which standard Euclidean flow matching fails. We address this with a Riemannian Flow Matching framework defined on a product manifold of four hyperspheres, aligned with VGGT's multi-scale encoder, which keeps generated tokens on the valid data manifold required by the frozen decoding heads. On RealEstate10K, ScanNet++ and ETH3D, our method achieves strong performance against recent scene generation baselines in both per-view appearance and aggregated 3D geometry, establishing latent-space flow matching on geometric foundation models as a viable paradigm for 3D generation. The project page can be found https://lisaweijler.github.io/geometry-grounded-rfm/{here}.

In this article, we introduce and study singular foliations of b^k-type. These singular foliations formalize the properties of vector fields that are tangent to order k along a submanifold W subset M. Our first result is a classification of these foliations, relating them to geometric structures defined in a formal neighborhood of the submanifold, such as jets of distributions that are involutive up to order k-1. When W is a hypersurface, singular foliations of b^k-type are Lie algebroids. In this particular case, they are generalizations of the b^k-tangent bundles introduced by Scott. Indeed, they are always locally isomorphic to b^k-tangent bundles, but globally such an isomorphism is obstructed by a holonomy invariant. Our second main result is a Riemann-Hilbert-style classification of singular foliations of b^k-type in terms of holonomy representations. In this paper, we study singular foliations of b^k-type from several different perspectives. In particular: (1) We study the problem of extending a k-th-order foliation to a (k+1)-th order foliation and prove that this is obstructed by a characteristic class. (2) When W is a hypersurface, we give a detailed study of algebroid differential forms and extend Scott's calculation of the cohomology. (3) We study algebroid symplectic forms in terms of the geometric structures induced on W. In particular, we find that there is a close relationship between the above obstruction class for extensions and the symplectic variation of the symplectic foliation induced on W.

Transformer representations evolve through learned additive transformations that either preserve their current direction or redirect it. We study this evolution as a functional geometry, decomposing learned updates into parallel and perpendicular components. Across pretrained models, we find substantial parallel components beyond the residual identity path. We then apply the decomposition in two spaces: to attention and MLP updates relative to the hidden state, and to attention value aggregation relative to the current token's value. Targeted edits reveal a strongly space-dependent asymmetry: exclude-self value-space parallel manipulation is markedly more robust than residual-space and perpendicular counterparts, preserving the direct self message while scaling only the non-self aggregate. The same decomposition gives a component-resolved description of compression-induced update error: perpendicular error separates compression methods more clearly than parallel error. Extensive experiments further demonstrate that full-aggregate parallel suppression during from-scratch pretraining lowers validation-loss trajectories and improves downstream averages, with the value-space variant strongest. Together, these results connect representation geometry to editing robustness, compression diagnosis, and training-time intervention. Code is available in the https://github.com/Shwai-He/Transformer-Geometry{project repository}.

We address the computational challenges of solving parametric PDEs with non parametrized geometric variations and non-reducible problems, such as those involving shocks and discontinuities of variable positions. Traditional dimensionality reduction methods like POD struggle with these scenarios due to slowly decaying Kolmogorov widths. To overcome this, we propose a novel non-linear dimensionality reduction technique to reduce the required modes for representation. The non-linear reduction is obtained through a POD after applying a transformation on the fields, which we call optimal mappings, and is a solution to an optimization problem in infinite dimension. The proposed learning framework combines morphing techniques, non-linear dimensionality reduction, and Gaussian Process Regression (GPR). The problem is reformulated on a reference geometry before applying the dimensionality reduction. Our method learns both the optimal mapping, and the solution fields, using a series of GPR models, enabling efficient and accurate modeling of complex parametric PDEs with geometrical variability. The results obtained concur with current state-of-the-art models. We mainly compare our method with the winning solution of the ML4CFD NeurIPS 2024 competition.

We show how the Schur-Weyl duality that exists between the partition algebra and the symmetric group results in a stronger theoretical foundation for characterising all of the possible permutation equivariant neural networks whose layers are some tensor power of the permutation representation M_n of the symmetric group S_n. In doing so, we unify two separate bodies of literature, and we correct some of the major results that are now widely quoted by the machine learning community. In particular, we find a basis of matrices for the learnable, linear, permutation equivariant layer functions between such tensor power spaces in the standard basis of M_n by using an elegant graphical representation of a basis of set partitions for the partition algebra and its related vector spaces. Also, we show how we can calculate the number of weights that must appear in these layer functions by looking at certain paths through the McKay quiver for M_n. Finally, we describe how our approach generalises to the construction of neural networks that are equivariant to local symmetries.

Geometric analysis fundamentally distinguishes between extrinsic and intrinsic perspectives. The dominant paradigm in current 3D representation learning relies on either extrinsic spatial structures or high-level semantics, struggling to capture the essence of shape identity and underlying manifold topology. To bridge this gap, we introduce a novel 3D representation learning paradigm, namely PRISM, for Pre-training, which learns isometric embeddings by Recovering the Intrinsic Surface geodesic Metric. PRISM incorporates a topology-enforcing objective that explicitly constrains the structure of latent space, alongside a specialized two-stage training recipe mitigating sample imbalance inherent in the distribution of geodesic distances. Experiments demonstrate that our approach shows satisfactory accuracy, robustness, and high efficiency in geodesic distance prediction and achieves superior performance across diverse downstream tasks, including shape recognition, surface parameterization, and non-rigid correspondence. The code will be publicly available at https://github.com/AidenZhao/PRISM.

In neural networks, it is often desirable to work with various representations of the same space. For example, 3D rotations can be represented with quaternions or Euler angles. In this paper, we advance a definition of a continuous representation, which can be helpful for training deep neural networks. We relate this to topological concepts such as homeomorphism and embedding. We then investigate what are continuous and discontinuous representations for 2D, 3D, and n-dimensional rotations. We demonstrate that for 3D rotations, all representations are discontinuous in the real Euclidean spaces of four or fewer dimensions. Thus, widely used representations such as quaternions and Euler angles are discontinuous and difficult for neural networks to learn. We show that the 3D rotations have continuous representations in 5D and 6D, which are more suitable for learning. We also present continuous representations for the general case of the n-dimensional rotation group SO(n). While our main focus is on rotations, we also show that our constructions apply to other groups such as the orthogonal group and similarity transforms. We finally present empirical results, which show that our continuous rotation representations outperform discontinuous ones for several practical problems in graphics and vision, including a simple autoencoder sanity test, a rotation estimator for 3D point clouds, and an inverse kinematics solver for 3D human poses.

For any given dimension d, all reflexive d-polytopes can be found (in principle) as subpolytopes of a number of maximal polyhedra that are defined in terms of (d+1)-tuples of integers (weights), or combinations of k-tuples of weights with k<d+1. We present the results of a complete classification of sextuples of weights pertaining to the construction of all reflexive polytopes in five dimensions. We find 322 383 760 930 such weight systems. 185 269 499 015 of them give rise directly to reflexive polytopes and thereby to mirror pairs of Calabi-Yau fourfolds. These lead to 532 600 483 distinct sets of Hodge numbers.

Let T be a rooted and weighted tree, where the weight of any node is equal to the sum of the weights of its children. The popular Treemap algorithm visualizes such a tree as a hierarchical partition of a square into rectangles, where the area of the rectangle corresponding to any node in T is equal to the weight of that node. The aspect ratio of the rectangles in such a rectangular partition necessarily depends on the weights and can become arbitrarily high. We introduce a new hierarchical partition scheme, called a polygonal partition, which uses convex polygons rather than just rectangles. We present two methods for constructing polygonal partitions, both having guarantees on the worst-case aspect ratio of the constructed polygons; in particular, both methods guarantee a bound on the aspect ratio that is independent of the weights of the nodes. We also consider rectangular partitions with slack, where the areas of the rectangles may differ slightly from the weights of the corresponding nodes. We show that this makes it possible to obtain partitions with constant aspect ratio. This result generalizes to hyper-rectangular partitions in R^d. We use these partitions with slack for embedding ultrametrics into d-dimensional Euclidean space: we give a rm polylog(Delta)-approximation algorithm for embedding n-point ultrametrics into R^d with minimum distortion, where Delta denotes the spread of the metric, i.e., the ratio between the largest and the smallest distance between two points. The previously best-known approximation ratio for this problem was polynomial in n. This is the first algorithm for embedding a non-trivial family of weighted-graph metrics into a space of constant dimension that achieves polylogarithmic approximation ratio.

Given a remarkable representation of the generalized Pauli operators of two-qubits in terms of the points of the generalized quadrangle of order two, W(2), it is shown that specific subsets of these operators can also be associated with the points and lines of the four-dimensional projective space over the Galois field with two elements - the so-called Veldkamp space of W(2). An intriguing novelty is the recognition of (uni- and tri-centric) triads and specific pentads of the Pauli operators in addition to the "classical" subsets answering to geometric hyperplanes of W(2).

In this paper we demonstrate how sub-Riemannian geometry can be used for manifold learning and surface reconstruction by combining local linear approximations of a point cloud to obtain lower dimensional bundles. Local approximations obtained by local PCAs are collected into a rank k tangent subbundle on R^d, k<d, which we call a principal subbundle. This determines a sub-Riemannian metric on R^d. We show that sub-Riemannian geodesics with respect to this metric can successfully be applied to a number of important problems, such as: explicit construction of an approximating submanifold M, construction of a representation of the point-cloud in R^k, and computation of distances between observations, taking the learned geometry into account. The reconstruction is guaranteed to equal the true submanifold in the limit case where tangent spaces are estimated exactly. Via simulations, we show that the framework is robust when applied to noisy data. Furthermore, the framework generalizes to observations on an a priori known Riemannian manifold.

Large language models (LLMs) have shown remarkable proficiency in human-level reasoning and generation capabilities, which encourages extensive research on their application in mathematical problem solving. However, current work has been largely focused on text-based mathematical problems, with limited investigation in problems involving geometric information. Addressing this gap, we aim to enable LLMs to solve geometric problems by understanding image input. We first analyze the limitations of current Multimodal Large Language Models (MLLMs) in this area: they struggle to accurately comprehending basic geometric elements and their relationships. To overcome these challenges, we take advantage of the unique characteristics of geometric problems (such as unique geometric logical form, and geometric scalability) and the capacity of the textual LLMs to build an enriched multimodal geometry dataset based on existing data. The augmented dataset, Geo170K, contains more than 170K geometric image-caption and question-answer pairs. Utilizing our constructed Geo170K dataset, we develop G-LLaVA, which demonstrates exceptional performance in solving geometric problems, significantly outperforming GPT-4-V on the MathVista benchmark with only 7B parameters.

Efficiently serving large language models (LLMs) requires batching many requests together to reduce the cost per request. Yet, the key-value (KV) cache, which stores attention keys and values to avoid re-computations, significantly increases memory demands and becomes the new bottleneck in speed and memory usage. This memory demand increases with larger batch sizes and longer context lengths. Additionally, the inference speed is limited by the size of KV cache, as the GPU's SRAM must load the entire KV cache from the main GPU memory for each token generated, causing the computational core to be idle during this process. A straightforward and effective solution to reduce KV cache size is quantization, which decreases the total bytes taken by KV cache. However, there is a lack of in-depth studies that explore the element distribution of KV cache to understand the hardness and limitation of KV cache quantization. To fill the gap, we conducted a comprehensive study on the element distribution in KV cache of popular LLMs. Our findings indicate that the key cache should be quantized per-channel, i.e., group elements along the channel dimension and quantize them together. In contrast, the value cache should be quantized per-token. From this analysis, we developed a tuning-free 2bit KV cache quantization algorithm, named KIVI. With the hardware-friendly implementation, KIVI can enable Llama (Llama-2), Falcon, and Mistral models to maintain almost the same quality while using 2.6times less peak memory usage (including the model weight). This reduction in memory usage enables up to 4times larger batch size, bringing 2.35times sim 3.47times throughput on real LLM inference workload. The source code is available at https://github.com/jy-yuan/KIVI.

In this paper, we study the ideas of composition and decomposition in the context of vector spaces, graphs and matroids. For vector spaces V_{AB}, treated as collection of row vectors, with specified column set Auplus B, we define V_{SP}lrarv V_{PQ}, Scap Q= emptyset, to be the collection of all vectors (f_S,f_Q) such that (f_S,f_P)in V_{SP}, (f_P,f_Q)in V_{PQ}. An analogous operation G_{SP}lrarg G_{PQ}equivd G_{PQ} can be defined in relation to graphs G_{SP}, G_{PQ}, on edge sets Suplus P, Puplus Q, respectively in terms of an overlapping subgraph G_P which gets deleted in the right side graph (see for instance the notion of k-sum oxley). For matroids we define the `linking' M_{SP}lrarm M_{PQ} equivd (M_{SP}vee M_{PQ})times (Suplus Q), denoting the contraction operation by 'times'. In each case, we examine how to minimize the size of the `overlap' set P, without affecting the right side entity. In the case of vector spaces, there is a polynomial time algorithm for achieving the minimum, which we present. Similar ideas work for graphs and for matroids under appropriate conditions. Next we consider the problem of decomposition. Here, in the case of vector spaces, the problem is to decompose V_{SQ} as V_{SP}lrarv V_{PQ}, with minimum size P. We give a polynomial time algorithm for this purpose. In the case of graphs and matroids we give a solution to this problem under certain restrictions.

Informally, the 'linear representation hypothesis' is the idea that high-level concepts are represented linearly as directions in some representation space. In this paper, we address two closely related questions: What does "linear representation" actually mean? And, how do we make sense of geometric notions (e.g., cosine similarity or projection) in the representation space? To answer these, we use the language of counterfactuals to give two formalizations of "linear representation", one in the output (word) representation space, and one in the input (sentence) space. We then prove these connect to linear probing and model steering, respectively. To make sense of geometric notions, we use the formalization to identify a particular (non-Euclidean) inner product that respects language structure in a sense we make precise. Using this causal inner product, we show how to unify all notions of linear representation. In particular, this allows the construction of probes and steering vectors using counterfactual pairs. Experiments with LLaMA-2 demonstrate the existence of linear representations of concepts, the connection to interpretation and control, and the fundamental role of the choice of inner product.

This paper gives an explicit isomorphic mapping from the 240 real R^{8} roots of the E_8 Gosset 4_{21} 8-polytope to two golden ratio scaled copies of the 120 root H_4 600-cell quaternion 4-polytope using a traceless 8times8 rotation matrix U with palindromic characteristic polynomial coefficients and a unitary form e^{i\mathbb{U}}. It also shows the inverse map from a single H_4 600-cell to E_8 using a 4Dhookrightarrow8D chiral leftleftrightarrowright mapping function, φ scaling, and U^{-1}. This approach shows that there are actually four copies of each 600-cell living within E_8 in the form of chiral H_{4L}oplusφH_{4L}oplusH_{4R}oplusφH_{4R} roots. In addition, it demonstrates a quaternion Weyl orbit construction of H_4-based 4-polytopes that provides an explicit mapping between E_8 and four copies of the tri-rectified Coxeter-Dynkin diagram of H_4, namely the 120-cell of order 600. Taking advantage of this property promises to open the door to as yet unexplored E_8-based Grand Unified Theories or GUTs.

Serving large language models (LLMs) at scale necessitates efficient key-value (KV) cache management. KV caches can be reused across conversation turns via shared-prefix prompts that are common in iterative code editing and chat. However, stale caches consume scarce GPU memory, require offloading, or force recomputation. We present KVTC, a lightweight transform coder that compresses KV caches for compact on-GPU and off-GPU storage. Drawing on classical media compression, KVTC combines PCA-based feature decorrelation, adaptive quantization, and entropy coding. It requires only a brief initial calibration and leaves model parameters unchanged. By exploiting redundancies in KV caches, KVTC achieves up to 20times compression while maintaining reasoning and long-context accuracy, and 40times or higher for specific use cases. We test KVTC with Llama 3, Mistral NeMo, and R1-Qwen 2.5 models across benchmarks including AIME25, LiveCodeBench, GSM8K, MMLU, Qasper, RULER, and MATH-500. It consistently outperforms inference-time baselines such as token eviction, quantization, and SVD-based methods, while achieving higher compression ratios. These results support KVTC as a practical building block for memory-efficient LLM serving with reusable KV caches.

We propose Geometric Clifford Algebra Networks (GCANs) for modeling dynamical systems. GCANs are based on symmetry group transformations using geometric (Clifford) algebras. We first review the quintessence of modern (plane-based) geometric algebra, which builds on isometries encoded as elements of the Pin(p,q,r) group. We then propose the concept of group action layers, which linearly combine object transformations using pre-specified group actions. Together with a new activation and normalization scheme, these layers serve as adjustable geometric templates that can be refined via gradient descent. Theoretical advantages are strongly reflected in the modeling of three-dimensional rigid body transformations as well as large-scale fluid dynamics simulations, showing significantly improved performance over traditional methods.

k-nearest neighbor (k-NN) search is a fundamental primitive in geometry processing and computer graphics. While spatial partitioning structures such as kd-trees are standard, they are often manifold-blind, failing to exploit the intrinsic low-dimensional structure of points sampled from 2-manifolds. Recent advances in dynamic programming-based nearest neighbor search (DP-NNS) leverage incrementally constructed Voronoi diagrams to accelerate queries, where each site p maintains a list of successors that progressively refine its Voronoi cell. However, DP-NNS is restricted to single nearest neighbor (k=1) searches, precluding their adoption in applications that require local neighborhood statistics. In this paper, we generalize the DP-NNS framework to support arbitrary k-NN queries for manifold-aligned data. Our approach is founded on the geometric observation that if p_i is the nearest neighbor of a query q in P, then the second nearest neighbor of q must reside either within the prefix set P_{1:i-1} = {p_1, \dots, p_{i-1}} or within p_i's successor list. By recursively extending this principle, we introduce Manifold k-NN, a recursive algorithmic scheme that significantly outperforms conventional kd-trees for manifold-aligned data. Our method achieves a 1\times--10\times speedup in volume-to-surface query scenarios and inherently supports dynamic prefix queries -- enabling k-NN searches within any subset P_{1:m} (m \leq n) with zero overhead. Furthermore, we extend the framework to support point deletion via local Delaunay updates, providing a complete suite of dynamic operations for point set modification. Comprehensive experiments on diverse geometric datasets demonstrate the efficiency and broad applicability of our approach for modern graphics pipelines. Source code is available at https://github.com/sssomeone/manifold-knn.

Attention sinks, representation collapse, and norm stratification are treated as transformer-specific pathologies. We show they are not specific to attention: they are what content-based routing does under a fixed similarity metric. We give a reframing identity: softmax attention is Boltzmann-weighted aggregation over Euclidean distances with constant key norms, so its score omits a -|k|^2 term and is blind to key magnitude. This predicts that any router whose metric is ill-matched to its representations should compensate, by concentrating its routing and collapsing the routed representations. We test it on routers that score and aggregate over different axes: softmax attention over tokens (nine pretrained transformers), graph attention over nodes, a selective state-space model and a recurrent mixer over time, and learned residuals over depth. All develop the same signature, and two within-model ablations show it is caused by the routing mechanism rather than by incidental dynamics. The form is contingent, set by the strength of the positional brake each router carries alongside its content score; we sweep that brake and move the onset across its whole range. The mechanism is not contingent, and it does not require norm stratification: a router with norm-normalized keys concentrates just the same. We do not claim these models implement Riemannian geometry; the geometric view is a diagnostic that names the inadequacy of the flat, norm-blind metric.

Geometric deep learning, i.e., designing neural networks to handle the ubiquitous geometric data such as point clouds and graphs, have achieved great successes in the last decade. One critical inductive bias is that the model can maintain invariance towards various transformations such as translation, rotation, and scaling. The existing graph neural network (GNN) approaches can only maintain permutation-invariance, failing to guarantee invariance with respect to other transformations. Besides GNNs, other works design sophisticated transformation-invariant layers, which are computationally expensive and difficult to be extended. To solve this problem, we revisit why the existing neural networks cannot maintain transformation invariance when handling geometric data. Our findings show that transformation-invariant and distance-preserving initial representations are sufficient to achieve transformation invariance rather than needing sophisticated neural layer designs. Motivated by these findings, we propose Transformation Invariant Neural Networks (TinvNN), a straightforward and general framework for geometric data. Specifically, we realize transformation-invariant and distance-preserving initial point representations by modifying multi-dimensional scaling before feeding the representations into neural networks. We prove that TinvNN can strictly guarantee transformation invariance, being general and flexible enough to be combined with the existing neural networks. Extensive experimental results on point cloud analysis and combinatorial optimization demonstrate the effectiveness and general applicability of our proposed method. Based on the experimental results, we advocate that TinvNN should be considered a new starting point and an essential baseline for further studies of transformation-invariant geometric deep learning.

We present GRAPE (Group RepresentAtional Position Encoding), a unified framework for positional encoding based on group actions. GRAPE brings together two families of mechanisms: (i) multiplicative rotations (Multiplicative GRAPE) in SO(d) and (ii) additive logit biases (Additive GRAPE) arising from unipotent actions in the general linear group GL. In Multiplicative GRAPE, a position n in Z (or t in R) acts as G(n)=exp(n,ω,L) with a rank-2 skew generator L in R^{d times d}, yielding a relative, compositional, norm-preserving map with a closed-form matrix exponential. RoPE is recovered exactly when the d/2 planes are the canonical coordinate pairs with log-uniform spectrum. Learned commuting subspaces and compact non-commuting mixtures strictly extend this geometry to capture cross-subspace feature coupling at O(d) and O(r d) cost per head, respectively. In Additive GRAPE, additive logits arise as rank-1 (or low-rank) unipotent actions, recovering ALiBi and the Forgetting Transformer (FoX) as exact special cases while preserving an exact relative law and streaming cacheability. Altogether, GRAPE supplies a principled design space for positional geometry in long-context models, subsuming RoPE and ALiBi as special cases. Project Page: https://github.com/model-architectures/GRAPE.

Existing RGB-based imitation learning approaches typically employ traditional vision encoders such as ResNet or ViT, which lack explicit 3D reasoning capabilities. Recent geometry-grounded vision models, such as VGGT~wang2025vggt, provide robust spatial understanding and are promising candidates to address this limitation. This work investigates the integration of geometry-aware visual representations into robotic manipulation. Our results suggest that incorporating the geometry-aware vision encoder into imitation learning frameworks, including ACT and DP, yields up to 6.5% improvement over standard vision encoders in success rate across single- and bi-manual manipulation tasks in both simulation and real-world settings. Despite these benefits, most geometry-grounded models require high computational cost, limiting their deployment in practical robotic systems. To address this challenge, we propose eVGGT, an efficient geometry-aware encoder distilled from VGGT. eVGGT is nearly 9 times faster and 5 times smaller than VGGT, while preserving strong 3D reasoning capabilities. Code and pretrained models will be released to facilitate further research in geometry-aware robotics.

Graph foundation models represent a transformative paradigm for learning transferable representations across diverse graph domains. Recent methods leverage large language models to unify graph and text modalities into a shared representation space using contrastive learning. However, systematic evaluations reveal significant performance degradation at structural boundaries where distinct topological patterns converge, with accuracy losses exceeding 20 percentage points. This issue arises from a key limitation: current methods assume all graph structures can be encoded within a single Euclidean space. In reality, tree structures require hyperbolic geometry to preserve hierarchical branching, while cyclic patterns depend on spherical geometry for closure properties. At structural boundaries, nodes experience conflicting geometric constraints that uniform encoding spaces cannot resolve. This raises a crucial challenge: Can alignment frameworks be designed to respect the intrinsic geometric diversity of graph structures? We introduce GraphShaper, a geometry-aware framework that enhances graph encoding through multi-geometric specialization. Our approach employs expert networks tailored to different geometric spaces, dynamically computing fusion weights to adaptively integrate geometric properties based on local structural characteristics. This adaptive fusion preserves structural integrity before alignment with text embeddings. Extensive experiments demonstrate that GraphShaper achieves 9.47\% accuracy improvements on citation networks and 7.63\% on social networks in zero-shot settings.

Computer-aided design (CAD) is the digital construction of 2D and 3D objects, and is central to a wide range of engineering and manufacturing applications like automobile and aviation. Despite its importance, CAD modeling remains largely a time-intensive, manual task. Recent works have attempted to automate this process with small transformer-based models and handcrafted CAD sequence representations. However, there has been little effort to leverage the potential of large language models (LLMs) for sequential CAD design. In this work, we introduce a new large-scale dataset of more than 170k CAD models annotated with high-quality, human-like descriptions generated with our pipeline based on GPT-4.1. Using this dataset, we fine-tune powerful code-LLMs to generate CAD sequences represented in a JSON-based format from natural language descriptions, demonstrating the viability and effectiveness of this approach for text-conditioned CAD generation. Because simple metrics often fail to reflect the quality of generated objects, we introduce geometric and topological metrics based on sphericity, mean curvature, and Euler characteristic to provide richer structural insights. Our experiments and ablation studies on both synthetic and human-annotated data demonstrate that CADmium is able to automate CAD design, drastically speeding up the design of new objects. The dataset, code, and fine-tuned models are available online.

In this paper, we present Gaussian Splatting based text-to-3D generation (GSGEN), a novel approach for generating high-quality 3D objects. Previous methods suffer from inaccurate geometry and limited fidelity due to the absence of 3D prior and proper representation. We leverage 3D Gaussian Splatting, a recent state-of-the-art representation, to address existing shortcomings by exploiting the explicit nature that enables the incorporation of 3D prior. Specifically, our method adopts a progressive optimization strategy, which includes a geometry optimization stage and an appearance refinement stage. In geometry optimization, a coarse representation is established under a 3D geometry prior along with the ordinary 2D SDS loss, ensuring a sensible and 3D-consistent rough shape. Subsequently, the obtained Gaussians undergo an iterative refinement to enrich details. In this stage, we increase the number of Gaussians by compactness-based densification to enhance continuity and improve fidelity. With these designs, our approach can generate 3D content with delicate details and more accurate geometry. Extensive evaluations demonstrate the effectiveness of our method, especially for capturing high-frequency components. Video results are provided at https://gsgen3d.github.io. Our code is available at https://github.com/gsgen3d/gsgen

Magnitude of a finite metric space and the related notion of magnitude functions on metric spaces is an active area of research in algebraic topology. Magnitude originally arose in the context of biology, where it represents the number of effective species in an environment; when applied to a one-parameter family of metric spaces tX with scale parameter t, the magnitude captures much of the underlying geometry of the space. Prior work has mostly focussed on properties of magnitude in a global sense; in this paper we restrict the sets to finite subsets of Euclidean space and investigate its individual components. We give an explicit formula for the corrected inclusion-exclusion principle, and define a quantity associated with each point, called the moment which gives an intrinsic ordering to the points. We exploit this in order to form an algorithm which approximates the convex hull.

Knot diagrams are among the most common visual tools in topology. Computer programs now make it possible to draw, manipulate and render them digitally, which proves to be useful in knot theory teaching and research. Still, an openly available tool to manipulate knot diagrams in a real-time, interactive way is yet to be developed. We introduce a method of operating on the geometry of the knot diagram itself without any underlying three-dimensional structure that can underpin such an application. This allows us to directly interact with vector graphics knot diagrams while at the same time computing knot invariants in ways proposed by previous work. An implementation of this method is provided.

We provide the geometric construction of a series of generalized Schur algebras of any type via Borel-Moore homologies and equivariant K-groups of generalized Steinberg varieties. As applications, we obtain a Schur algebra analogue of the local geometric Langlands correspondence of any type, provide an equivariant K-theoretic realization of quasi-split imathquantum groups of affine type AIII, and establish a geometric Howe duality for affine (imath-)quantum groups.

Current diffusion or flow-based generative models for 3D shapes divide to two: distilling pre-trained 2D image diffusion models, and training directly on 3D shapes. When training a diffusion or flow models on 3D shapes a crucial design choice is the shape representation. An effective shape representation needs to adhere three design principles: it should allow an efficient conversion of large 3D datasets to the representation form; it should provide a good tradeoff of approximation power versus number of parameters; and it should have a simple tensorial form that is compatible with existing powerful neural architectures. While standard 3D shape representations such as volumetric grids and point clouds do not adhere to all these principles simultaneously, we advocate in this paper a new representation that does. We introduce Mosaic-SDF (M-SDF): a simple 3D shape representation that approximates the Signed Distance Function (SDF) of a given shape by using a set of local grids spread near the shape's boundary. The M-SDF representation is fast to compute for each shape individually making it readily parallelizable; it is parameter efficient as it only covers the space around the shape's boundary; and it has a simple matrix form, compatible with Transformer-based architectures. We demonstrate the efficacy of the M-SDF representation by using it to train a 3D generative flow model including class-conditioned generation with the 3D Warehouse dataset, and text-to-3D generation using a dataset of about 600k caption-shape pairs.

The choice of data representation is a key factor in the success of deep learning in geometric tasks. For instance, DUSt3R recently introduced the concept of viewpoint-invariant point maps, generalizing depth prediction and showing that all key problems in the 3D reconstruction of static scenes can be reduced to predicting such point maps. In this paper, we develop an analogous concept for a very different problem: the reconstruction of the 3D shape and pose of deformable objects. To this end, we introduce Dual Point Maps (DualPM), where a pair of point maps is extracted from the same image-one associating pixels to their 3D locations on the object and the other to a canonical version of the object in its rest pose. We also extend point maps to amodal reconstruction to recover the complete shape of the object, even through self-occlusions. We show that 3D reconstruction and 3D pose estimation can be reduced to the prediction of DualPMs. Empirically, we demonstrate that this representation is a suitable target for deep networks to predict. Specifically, we focus on modeling quadrupeds, showing that DualPMs can be trained purely on synthetic 3D data, consisting of one or two models per category, while generalizing effectively to real images. With this approach, we achieve significant improvements over previous methods for the 3D analysis and reconstruction of such objects.

NVIDIA's CUTLASS library provides a robust and expressive set of methods for describing and manipulating multi-dimensional tensor data on the GPU. These methods are conceptually grounded in the abstract notion of a CuTe layout and a rich algebra of such layouts, including operations such as composition, logical product, and logical division. In this paper, we present a categorical framework for understanding this layout algebra by focusing on a naturally occurring class of tractable layouts. To this end, we define two categories Tuple and Nest whose morphisms give rise to layouts. We define a suite of operations on morphisms in these categories and prove their compatibility with the corresponding layout operations. Moreover, we give a complete characterization of the layouts which arise from our construction. Finally, we provide a Python implementation of our categorical constructions, along with tests that demonstrate alignment with CUTLASS behavior. This implementation can be found at our git repository https://github.com/ColfaxResearch/layout-categories.

Differential geometric approaches to the analysis and processing of data in the form of symmetric positive definite (SPD) matrices have had notable successful applications to numerous fields including computer vision, medical imaging, and machine learning. The dominant geometric paradigm for such applications has consisted of a few Riemannian geometries associated with spectral computations that are costly at high scale and in high dimensions. We present a route to a scalable geometric framework for the analysis and processing of SPD-valued data based on the efficient computation of extreme generalized eigenvalues through the Hilbert and Thompson geometries of the semidefinite cone. We explore a particular geodesic space structure based on Thompson geometry in detail and establish several properties associated with this structure. Furthermore, we define a novel iterative mean of SPD matrices based on this geometry and prove its existence and uniqueness for a given finite collection of points. Finally, we state and prove a number of desirable properties that are satisfied by this mean.

The gradients of convex functions are expressive models of non-trivial vector fields. For example, Brenier's theorem yields that the optimal transport map between any two measures on Euclidean space under the squared distance is realized as a convex gradient, which is a key insight used in recent generative flow models. In this paper, we study how to model convex gradients by integrating a Jacobian-vector product parameterized by a neural network, which we call the Input Convex Gradient Network (ICGN). We theoretically study ICGNs and compare them to taking the gradient of an Input-Convex Neural Network (ICNN), empirically demonstrating that a single layer ICGN can fit a toy example better than a single layer ICNN. Lastly, we explore extensions to deeper networks and connections to constructions from Riemannian geometry.

Generating structured, editable diagrams remains a significant challenge for contemporary large language models, despite their proficiency in general-purpose vector code generation. The primary difficulty lies in the structural fragility of the output; minor errors such as misaligned connector endpoints, text labels overlapping borders, or complex layouts drifting beyond the canvas boundaries render the resulting SVG files functionally unusable for professional applications. To address these issues, we introduce GeoSVG-RL, a specialized reinforcement learning framework designed for layout-constrained text-to-SVG generation. Unlike standard training objectives that rely solely on maximizing token-level likelihood, our approach optimizes the policy against explicit, executable geometric feedback. The model first produces a structured layout plan that serves as a geometric contract for the subsequent generation of the SVG code. This code is then rendered through a browser-backed verifier, enabling the calculation of fine-grained rewards across six critical dimensions: rendering validity, canvas fitting, precise anchor placement, text containment, graph consistency, and code cleanliness. We utilize Group Relative Policy Optimization (GRPO) to refine the model, sampling multiple candidates per prompt to facilitate updates based on relative quality. Starting from a supervised warm-start phase on synthetic data, GeoSVG-RL achieves substantial gains in structural reliability, particularly in arrow-anchor accuracy and text-in-box rates. Quantitative evaluations demonstrate that our method consistently outperforms current state-of-the-art systems in local geometric precision and the preservation of graph connectivity, providing a robust pathway toward automated yet reliable technical illustration.

We introduce Geometric Neural Operators (GNPs) for accounting for geometric contributions in data-driven deep learning of operators. We show how GNPs can be used (i) to estimate geometric properties, such as the metric and curvatures, (ii) to approximate Partial Differential Equations (PDEs) on manifolds, (iii) learn solution maps for Laplace-Beltrami (LB) operators, and (iv) to solve Bayesian inverse problems for identifying manifold shapes. The methods allow for handling geometries of general shape including point-cloud representations. The developed GNPs provide approaches for incorporating the roles of geometry in data-driven learning of operators.

Vision-language models solve geometry problems with rising accuracy, yet their intermediate states remain latent and unverifiable: a relation expressed in textual reasoning or drawing code carries no guarantee that a constraint-satisfying configuration realizes it. We observe that existing externalization methods based on rendered pixels or one-shot scripts fail to provide exact, per-action geometric guarantees. Enforcing geometric relations by algebraic definition closes this gap: the workspace becomes a constraint-checked evolving canvas. We present Draw2Think, a framework that recasts geometric reasoning from latent spatial inference into agentic interaction with the GeoGebra constraint engine. In a Propose-Draw-Verify loop, Draw2Think externalizes hypotheses onto an executable canvas, measures exact geometric quantities, and feeds structured observations back to the model, so subsequent reasoning proceeds from checked canvas state grounded by the shared workspace. This externalization makes two properties separately auditable: model-level Construction Fidelity (whether the canvas realizes the intended configuration) and engine-level Measurement Faithfulness (exact values and relations from canvas constraints). Across construction, outcome, and rendering evaluations, Draw2Think builds canvases that pass 95.9% predicate-level and 84.0% strict problem-level construction checks on GeoGoal, improves outcome accuracy by up to 4.1%/16.4% on planar/solid benchmarks, and attains 68.2%/90.5% strict/relaxed rendering scores on GenExam-math. Project page is available at https://draw2think.github.io/

It has been observed that representations learned by distinct neural networks conceal structural similarities when the models are trained under similar inductive biases. From a geometric perspective, identifying the classes of transformations and the related invariances that connect these representations is fundamental to unlocking applications, such as merging, stitching, and reusing different neural modules. However, estimating task-specific transformations a priori can be challenging and expensive due to several factors (e.g., weights initialization, training hyperparameters, or data modality). To this end, we introduce a versatile method to directly incorporate a set of invariances into the representations, constructing a product space of invariant components on top of the latent representations without requiring prior knowledge about the optimal invariance to infuse. We validate our solution on classification and reconstruction tasks, observing consistent latent similarity and downstream performance improvements in a zero-shot stitching setting. The experimental analysis comprises three modalities (vision, text, and graphs), twelve pretrained foundational models, nine benchmarks, and several architectures trained from scratch.

Vector Quantization (VQ) is an appealing model compression method to obtain a tiny model with less accuracy loss. While methods to obtain better codebooks and codes under fixed clustering dimensionality have been extensively studied, optimizations of the vectors in favour of clustering performance are not carefully considered, especially via the reduction of vector dimensionality. This paper reports our recent progress on the combination of dimensionality compression and vector quantization, proposing a Low-Rank Representation Vector Quantization (LR^2VQ) method that outperforms previous VQ algorithms in various tasks and architectures. LR^2VQ joins low-rank representation with subvector clustering to construct a new kind of building block that is directly optimized through end-to-end training over the task loss. Our proposed design pattern introduces three hyper-parameters, the number of clusters k, the size of subvectors m and the clustering dimensionality d. In our method, the compression ratio could be directly controlled by m, and the final accuracy is solely determined by d. We recognize d as a trade-off between low-rank approximation error and clustering error and carry out both theoretical analysis and experimental observations that empower the estimation of the proper d before fine-tunning. With a proper d, we evaluate LR^2VQ with ResNet-18/ResNet-50 on ImageNet classification datasets, achieving 2.8\%/1.0\% top-1 accuracy improvements over the current state-of-the-art VQ-based compression algorithms with 43times/31times compression factor.

We study Forman--Ricci and effective resistance curvatures on the skeleta of convex polytopes. Our guiding questions are: how frequently do polytopal graphs exhibit everywhere positive curvature, and what structural constraints does positivity impose? For Forman--Ricci curvature we derive an exact identity for the average edge curvature in terms of flag f-numbers and establish the existence of infinite families of Forman--Ricci-positive polytopes in every fixed dimension dge 6. We prove finiteness results in low dimension: there are only finitely many Forman--Ricci-positive 3- and 4-polytopes; for d=5 we show finiteness in the simplicial case, and conjecture its extension to 5-polytopes more generally. For the resistance curvature κ(v) we establish the existence of infinite families for all dge 3, and we provide a quantitative lower bound for κ(v) in a simple 3-polytope in terms of the lengths of the three 2-faces incident to v. This bound leads to constructions of non-vertex-transitive, resistance-positive 3-polytopes via Δ-operations, and a degree-based obstruction showing that if each neighbor of v has degree at most d_v-2, then κ(v)le 0. Our results suggest that positive curvature on polytopal skeletons is rare and constrained.

Generalization, the ability to perform well beyond the training context, is a hallmark of biological and artificial intelligence, yet anticipating unseen failures remains a central challenge. Conventional approaches often take a ``bottom-up'' mechanistic route by reverse-engineering interpretable features or circuits to build explanatory models. While insightful, these methods often struggle to provide the high-level, predictive signals for anticipating failure in real-world deployment. Here, we propose using a ``top-down'' approach to studying generalization failures inspired by medical biomarkers: identifying system-level measurements that serve as robust indicators of a model's future performance. Rather than mapping out detailed internal mechanisms, we systematically design and test network markers to probe structure, function links, identify prognostic indicators, and validate predictions in real-world settings. In image classification, we find that task-relevant geometric properties of in-distribution (ID) object manifolds consistently forecast poor out-of-distribution (OOD) generalization. In particular, reductions in two geometric measures, effective manifold dimensionality and utility, predict weaker OOD performance across diverse architectures, optimizers, and datasets. We apply this finding to transfer learning with ImageNet-pretrained models. We consistently find that the same geometric patterns predict OOD transfer performance more reliably than ID accuracy. This work demonstrates that representational geometry can expose hidden vulnerabilities, offering more robust guidance for model selection and AI interpretability.

This paper presents GPSM4K, a comprehensive geometry multimodal dataset tailored to augment the problem-solving capabilities of Large Vision Language Models (LVLMs). GPSM4K encompasses 2157 multimodal question-answer pairs manually extracted from mathematics textbooks spanning grades 7-12 and is further augmented to 5340 problems, consisting of both numerical and theorem-proving questions. In contrast to PGPS9k, Geometry3K, and Geo170K which feature only objective-type questions, GPSM4K offers detailed step-by-step solutions in a consistent format, facilitating a comprehensive evaluation of problem-solving approaches. This dataset serves as an excellent benchmark for assessing the geometric reasoning capabilities of LVLMs. Evaluation of our test set shows that there is scope for improvement needed in open-source language models in geometry problem-solving. Finetuning on our training set increases the geometry problem-solving capabilities of models. Further, We also evaluate the effectiveness of techniques such as image captioning and Retrieval Augmentation generation (RAG) on model performance. We leveraged LLM to automate the task of final answer evaluation by providing ground truth and predicted solutions. This research will help to assess and improve the geometric reasoning capabilities of LVLMs.

We study low-precision computation of C=AB with both factors quantized. We derive an exact finite-dimensional identity for the expected squared product error under independent, zero-mean entrywise errors with known variance fields; it holds exactly for non-overloading subtractive dither and for independent stochastic rounding, and we empirically assess deterministic round-to-nearest (RTN). Using the product-preserving equivalence AB=(AT)(T^{-1}B), we formulate contraction-gauge preconditioning: jointly choosing a factor representation and its sharing pattern before quantization. Preconditioning can reduce product error but may require extra transformed, quantized copies of the opposite operand: a shared transform needs one copy, a block-specific transform up to one per block. Within the bounded family of positive diagonal gauges (folds), a geometric program computes a globally optimal shared fold and a linear program decides whether the identity fold is already optimal. For other families we derive computable selection statistics -- tail index for scaling, profile spread for partitioning, coherence and weighted-Gram energy for rotations, slice-energy covariance for hierarchy depth -- with upper bounds for ranking heuristic candidates. Across twelve linear products from a trained three-block image classifier, median within-product rank correlations between dither-model predictions and deterministic-RTN errors are 0.937 at 8 bits and 0.918 at 4 bits. The GP fold cuts held-out product error over the identity fold by 18.0% (8-bit) and 20.5% (4-bit) in geometric mean, beats a SmoothQuant-style grid baseline at both precisions and on ten of twelve products, and lowers composed logit MSE by 15.4% and 26.4%. We thus provide exact stochastic product-error accounting, certified selection within the diagonal family, and a common objective for evaluating reusable transform candidates under RTN.

In machine learning, there is a long history of trying to build neural networks that can learn from fewer example data by baking in strong geometric priors. However, it is not always clear a priori what geometric constraints are appropriate for a given task. Here, we explore the possibility that one can uncover useful geometric inductive biases by studying how training molds the Riemannian geometry induced by unconstrained neural network feature maps. We first show that at infinite width, neural networks with random parameters induce highly symmetric metrics on input space. This symmetry is broken by feature learning: networks trained to perform classification tasks learn to magnify local areas along decision boundaries. This holds in deep networks trained on high-dimensional image classification tasks, and even in self-supervised representation learning. These results begin to elucidate how training shapes the geometry induced by unconstrained neural network feature maps, laying the groundwork for an understanding of this richly nonlinear form of feature learning.

In this paper, we propose Img2CAD, the first approach to our knowledge that uses 2D image inputs to generate CAD models with editable parameters. Unlike existing AI methods for 3D model generation using text or image inputs often rely on mesh-based representations, which are incompatible with CAD tools and lack editability and fine control, Img2CAD enables seamless integration between AI-based 3D reconstruction and CAD software. We have identified an innovative intermediate representation called Structured Visual Geometry (SVG), characterized by vectorized wireframes extracted from objects. This representation significantly enhances the performance of generating conditioned CAD models. Additionally, we introduce two new datasets to further support research in this area: ABC-mono, the largest known dataset comprising over 200,000 3D CAD models with rendered images, and KOCAD, the first dataset featuring real-world captured objects alongside their ground truth CAD models, supporting further research in conditioned CAD model generation.

Equivariant neural networks have shown improved performance, expressiveness and sample complexity on symmetrical domains. But for some specific symmetries, representations, and choice of coordinates, the most common point-wise activations, such as ReLU, are not equivariant, hence they cannot be employed in the design of equivariant neural networks. The theorem we present in this paper describes all possible combinations of finite-dimensional representations, choice of coordinates and point-wise activations to obtain an exactly equivariant layer, generalizing and strengthening existing characterizations. Notable cases of practical relevance are discussed as corollaries. Indeed, we prove that rotation-equivariant networks can only be invariant, as it happens for any network which is equivariant with respect to connected compact groups. Then, we discuss implications of our findings when applied to important instances of exactly equivariant networks. First, we completely characterize permutation equivariant networks such as Invariant Graph Networks with point-wise nonlinearities and their geometric counterparts, highlighting a plethora of models whose expressive power and performance are still unknown. Second, we show that feature spaces of disentangled steerable convolutional neural networks are trivial representations.

We establish explicit means via which natural dilations of completely positive (CP) maps can be constructed à la Kraus's IInd representation theorem. To obtain this, we rely on the Choi-Jamiołkowski correspondence and develop a Cholesky algorithm for bi-partite systems. This enables a canonical construction of adjoint actions which recover the behaviour of the original CP-maps. Our results hold under separability assumptions and the requirement that the maps are completely bounded and preserve the subideal of finite rank operators.

We propose, implement, and compare with competitors a new architecture of equivariant neural networks based on geometric (Clifford) algebras: Generalized Lipschitz Group Equivariant Neural Networks (GLGENN). These networks are equivariant to all pseudo-orthogonal transformations, including rotations and reflections, of a vector space with any non-degenerate or degenerate symmetric bilinear form. We propose a weight-sharing parametrization technique that takes into account the fundamental structures and operations of geometric algebras. Due to this technique, GLGENN architecture is parameter-light and has less tendency to overfitting than baseline equivariant models. GLGENN outperforms or matches competitors on several benchmarking equivariant tasks, including estimation of an equivariant function and a convex hull experiment, while using significantly fewer optimizable parameters.

The composition gamma circ eta of Jordan curves gamma and eta in universal Teichm\"uller space is defined through the composition h_gamma circ h_eta of their conformal weldings. We show that whenever gamma and eta are curves of finite Loewner energy I^L, the energy of the composition satisfies $I^L(gamma circ eta) lesssim_K I^L(gamma) + I^L(eta), with an explicit constant in terms of the quasiconformal K of \gamma and \eta. We also study the asymptotic growth rate of the Loewner energy under n self-compositions \gamma^n := \gamma \circ \cdots \circ \gamma, showing limsup_{n rightarrow infty} 1{n}log I^L(gamma^n) lesssim_K 1, again with explicit constant. Our approach is to define a new conformally-covariant rooted welding functional W_h(y), and show W_h(y) \asymp_K I^L(\gamma) when h is a welding of \gamma and y is any root (a point in the domain of h). In the course of our arguments we also give several new expressions for the Loewner energy, including generalized formulas in terms of the Riemann maps f and g for \gamma which hold irrespective of the placement of \gamma on the Riemann sphere, the normalization of f and g, and what disks D, D^c \subset \mathbb{C} serve as domains. An additional corollary is that I^L(\gamma) is bounded above by a constant only depending on the Weil--Petersson distance from \gamma$ to the circle.

Recently single-view 3D generation via Gaussian splatting has emerged and developed quickly. They learn 3D Gaussians from 2D RGB images generated from pre-trained multi-view diffusion (MVD) models, and have shown a promising avenue for 3D generation through a single image. Despite the current progress, these methods still suffer from the inconsistency jointly caused by the geometric ambiguity in the 2D images, and the lack of structure of 3D Gaussians, leading to distorted and blurry 3D object generation. In this paper, we propose to fix these issues by GS-RGBN, a new RGBN-volume Gaussian Reconstruction Model designed to generate high-fidelity 3D objects from single-view images. Our key insight is a structured 3D representation can simultaneously mitigate the afore-mentioned two issues. To this end, we propose a novel hybrid Voxel-Gaussian representation, where a 3D voxel representation contains explicit 3D geometric information, eliminating the geometric ambiguity from 2D images. It also structures Gaussians during learning so that the optimization tends to find better local optima. Our 3D voxel representation is obtained by a fusion module that aligns RGB features and surface normal features, both of which can be estimated from 2D images. Extensive experiments demonstrate the superiority of our methods over prior works in terms of high-quality reconstruction results, robust generalization, and good efficiency.

Developing equivariant neural networks for the E(3) group plays an important role in modeling 3D data across real-world applications. Enforcing this equivariance primarily involves the tensor products of irreducible representations (irreps). However, the computational complexity of such operations increases significantly as higher-order tensors are used. In this work, we propose a systematic approach to substantially accelerate the computation of the tensor products of irreps. We mathematically connect the commonly used Clebsch-Gordan coefficients to the Gaunt coefficients, which are integrals of products of three spherical harmonics. Through Gaunt coefficients, the tensor product of irreps becomes equivalent to the multiplication between spherical functions represented by spherical harmonics. This perspective further allows us to change the basis for the equivariant operations from spherical harmonics to a 2D Fourier basis. Consequently, the multiplication between spherical functions represented by a 2D Fourier basis can be efficiently computed via the convolution theorem and Fast Fourier Transforms. This transformation reduces the complexity of full tensor products of irreps from O(L^6) to O(L^3), where L is the max degree of irreps. Leveraging this approach, we introduce the Gaunt Tensor Product, which serves as a new method to construct efficient equivariant operations across different model architectures. Our experiments on the Open Catalyst Project and 3BPA datasets demonstrate both the increased efficiency and improved performance of our approach.

Recent studies suggest that diffusion models can recover geometric structure in the data manifolds they are trained on, yet the supporting evidence has so far come mostly from natural-image data, where the underlying geometry itself is unknown. We study this question in a setting where the geometry is analytically tractable: constrained inverse kinematics (IK). Each task-space constraint defines a configuration-space manifold with known intrinsic dimension, giving direct ground truth for evaluating the geometry learned by the model. For each of the 6-DoF UR5 and 7-DoF Franka, we train a single conditional diffusion model across seven constraint families, spanning solution manifolds from discrete IK branches to self-motion manifolds. Our empirical results reveal that the intrinsic dimension recovered from the model's score function matches the analytical degrees of freedom of the corresponding constraint manifold across both robots. Moreover, linear interpolation in the latent space leads to generated solutions that remain close to the appropriate constraint manifold, indicating that the learned representation further captures geometric structure of the constraint family beyond intrinsic dimension alone. Constrained IK therefore offers a controlled setting for studying the intrinsic geometry learned by diffusion models.

The cascade of 2D geometric transformations were exploited to model relations between entities in a knowledge graph (KG), leading to an effective KG embedding (KGE) model, CompoundE. Furthermore, the rotation in the 3D space was proposed as a new KGE model, Rotate3D, by leveraging its non-commutative property. Inspired by CompoundE and Rotate3D, we leverage 3D compound geometric transformations, including translation, rotation, scaling, reflection, and shear and propose a family of KGE models, named CompoundE3D, in this work. CompoundE3D allows multiple design variants to match rich underlying characteristics of a KG. Since each variant has its own advantages on a subset of relations, an ensemble of multiple variants can yield superior performance. The effectiveness and flexibility of CompoundE3D are experimentally verified on four popular link prediction datasets.

Hyperbolic spaces have recently gained momentum in the context of machine learning due to their high capacity and tree-likeliness properties. However, the representational power of hyperbolic geometry is not yet on par with Euclidean geometry, mostly because of the absence of corresponding hyperbolic neural network layers. This makes it hard to use hyperbolic embeddings in downstream tasks. Here, we bridge this gap in a principled manner by combining the formalism of Möbius gyrovector spaces with the Riemannian geometry of the Poincaré model of hyperbolic spaces. As a result, we derive hyperbolic versions of important deep learning tools: multinomial logistic regression, feed-forward and recurrent neural networks such as gated recurrent units. This allows to embed sequential data and perform classification in the hyperbolic space. Empirically, we show that, even if hyperbolic optimization tools are limited, hyperbolic sentence embeddings either outperform or are on par with their Euclidean variants on textual entailment and noisy-prefix recognition tasks.

Transformers achieve strong performance across diverse domains but implicitly assume Euclidean geometry in their attention mechanisms, limiting their effectiveness on data with non-Euclidean structure. While recent extensions to hyperbolic and spherical spaces show promise for hierarchical and cyclical patterns, respectively, they require committing to a single geometry a priori, reducing flexibility when data exhibits mixed geometric properties. We introduce the Curvature-Adaptive Transformer (CAT), a novel architecture that dynamically learns per-token routing across three geometric attention branches through a lightweight, differentiable gating mechanism. Unlike fixed-geometry approaches, CAT enables adaptive geometric specialization, routing tokens to the appropriate curvature based on their local relational structure. The routing network provides interpretable curvature preferences while each branch employs geometry-specific operations optimized for its respective manifold. On knowledge graph completion benchmarks (FB15k-237, WN18RR), CAT achieves approximately 10% improvements in MRR and Hits@10 over fixed-geometry baselines with minimal overhead (5% parameter increase, comparable inference time). These results demonstrate that learned geometric adaptation outperforms any single fixed geometry for complex relational reasoning, establishing CAT as a scalable and interpretable foundation for mixture-of-geometry architectures across language, vision, and multimodal domains.

Why does the low dimensionality of representations, typically dapprox 1000, not prevent modern embedding-based retrieval models from scaling to billions, or even trillions, of data points? To answer this question, we study maximal-margin embeddings in the following retrieval model, classically studied in communication complexity [PS86] and more recently in embedding-based retrieval [WBNL26]. Let Ain {0,1}^{Ntimes n} be a matrix indicating whether each of N queries is relevant to each of n documents. We are interested in the largest margin m>0, denoted by m^{rd}(d, A), for which there exist unit norm embeddings of the queries and documents {U_j}_{j = 1}^N, {V_i}_{i = 1}^n with the following property. langle U_j, V_irangle ge m whenever A_{ji} = 1 and langle U_j, V_irangle le -m otherwise. A large margin is a key proxy for representation quality: it controls both robustness to perturbations and compositional generalization across queries. Our main theorem establishes that the best possible margin without a restriction on the dimension, m^{rd}(+infty, A), can be nearly achieved in dimension d = O(m^{rd}(+infty, A)^{-2}log n) which improves a theorem of [BDES02]. Together with a matching lower bound in Theorem 1.5, we conclude that when Ain {0,1}^{n{k}times n} is the matrix containing all possible k-sparse rows once, dimension d = O(klog (n/k)) is necessary and sufficient for the maximal possible margin m^{rd}(+infty, A) = Θ(k^{-1/2}) in this setting. This fully resolves the setup of [WBNL26]. We also give several constructions for large margins when d = o(klog (n/k)). Finally, we empirically test the InfoNCE and sigmoid losses for producing large margin embeddings and demonstrate a clear advantage of the sigmoid loss.