Daily Papers

Large Language Models (LLMs) have demonstrated remarkable capabilities across various domains, including software development, education, and technical assistance. Among these, software development is one of the key areas where LLMs are increasingly adopted. However, when hardware constraints are considered-for instance, in physical computing, where software must interact with and control physical hardware -their effectiveness has not been fully explored. To address this gap, we introduce PCEval (Physical Computing Evaluation), the first benchmark in physical computing that enables a fully automatic evaluation of the capabilities of LLM in both the logical and physical aspects of the projects, without requiring human assessment. Our evaluation framework assesses LLMs in generating circuits and producing compatible code across varying levels of project complexity. Through comprehensive testing of 13 leading models, PCEval provides the first reproducible and automatically validated empirical assessment of LLMs' ability to reason about fundamental hardware implementation constraints within a simulation environment. Our findings reveal that while LLMs perform well in code generation and logical circuit design, they struggle significantly with physical breadboard layout creation, particularly in managing proper pin connections and avoiding circuit errors. PCEval advances our understanding of AI assistance in hardware-dependent computing environments and establishes a foundation for developing more effective tools to support physical computing education.

We propose a theoretical framework--Holographic Reservoir Computing (HRC)--which hypothesizes that the thermodynamic noise and timing dynamics in voltage-stressed Bitcoin mining ASICs (BM1366) could potentially serve as a physical reservoir computing substrate. We present the CHIMERA (Conscious Hybrid Intelligence via Miner-Embedded Resonance Architecture) system architecture, which treats the SHA-256 hashing pipeline not as an entropy source, but as a deterministic diffusion operator whose timing characteristics under controlled voltage and frequency conditions may exhibit computationally useful dynamics. We report preliminary observations of non-Poissonian variability in inter-arrival time statistics during edge-of-stability operation, which we term the "Silicon Heartbeat" hypothesis. Theoretical analysis based on Hierarchical Number System (HNS) representations suggests that such architectures could achieve O(log n) energy scaling compared to traditional von Neumann O(2^n) dependencies. However, we emphasize that these are theoretical projections requiring experimental validation. We present the implemented measurement infrastructure, acknowledge current limitations, and outline the experimental program necessary to confirm or refute these hypotheses. This work contributes to the emerging field of thermodynamic computing by proposing a novel approach to repurposing obsolete cryptographic hardware for neuromorphic applications.

Control systems are ubiquitous in modern technology, comprising an engineered plant to be kept within specific, often fine-tuned, limits, and a separate controller that ensures this is the case. While modern controllers often employ digital computers, other examples are purely mechanical, or even biological. It is an open question whether computation is happening within all controllers by virtue of them being part of a control system. Abstraction/ Representation theory (ART) has been developed to tackle just this question of whether a physical system is computing. Here, we demonstrate how to use ART to model control systems, and analyse them for computational properties. We determine that the plant of a control system is (a proxy for) the representational entity necessary in ART for the existence of any computation: the plant is the user of the controller. We consider specific systems: a digital thermostat, an electro-mechanical thermostat, the purely mechanical centrifugal governor, and an open-loop human-controlled heating system. We show that all these systems, and control systems in general, are performing some degree of computation. As an initial use of these results, we apply them to computationalism within cognitive theory: we show the governor is computing, so it cannot play its role of counter-example in the question of whether the brain is too.

In VLSI physical design, many algorithms require the solution of difficult combinatorial optimization problems such as max/min-cut, max-flow problems etc. Due to the vast number of elements typically found in this problem domain, these problems are computationally intractable leading to the use of approximate solutions. In this work, we explore the Ising spin glass model as a solution methodology for hard combinatorial optimization problems using the general purpose GPU (GPGPU). The Ising model is a mathematical model of ferromagnetism in statistical mechanics. Ising computing finds a minimum energy state for the Ising model which essentially corresponds to the expected optimal solution of the original problem. Many combinatorial optimization problems can be mapped into the Ising model. In our work, we focus on the max-cut problem as it is relevant to many VLSI physical design problems. Our method is inspired by the observation that Ising annealing process is very amenable to fine-grain massive parallel GPU computing. We will illustrate how the natural randomness of GPU thread scheduling can be exploited during the annealing process to create random update patterns and allow better GPU resource utilization. Furthermore, the proposed GPU-based Ising computing can handle any general Ising graph with arbitrary connections, which was shown to be difficult for existing FPGA and other hardware based implementation methods. Numerical results show that the proposed GPU Ising max-cut solver can deliver more than 2000X speedup over the CPU version of the algorithm on some large examples, which shows huge performance improvement for addressing many hard optimization algorithms for practical VLSI physical design.

Computing is conventionally implemented by hardware engineered for information processing. Here we investigate infrastructure-native computing: the use of a physical system built for another primary function as a fixed computational operator. In time-domain simulations of an IEEE 14-bus electrical network, Kirchhoff's current law and Ohm's law relate voltage-reference perturbations applied at distributed controllable nodes interfaced by power electronics converters to current responses through a topology-dependent transformation. A trained digital encoder and decoder exploit this transformation for image classification, reaching 91.5% accuracy on MNIST and 82.25% on Fashion-MNIST. The modeled operator is represented by 933 surrogate parameters, compared with 12,340 task-trained parameters for an accuracy-matched fully connected core transformation. Current superposition further supports concurrent spatial sharing of the operator and sequential temporal reuse, with per-stream accuracies above 85% and 93%, respectively, in surrogate-model evaluations. Evaluations on CIFAR-10 and repeated 10-class tasks sampled from a Butterflies-and-Moths dataset show that the incremental utility of the physical operator depends on the representation supplied by upstream digital feature extraction. These results provide a simulation-based proof of concept for infrastructure-native computing with electrical networks and identify topology, accessible control channels, and input representation as determinants of its computational utility.

Physical simulators have been widely used in robot planning and control. Among them, differentiable simulators are particularly favored, as they can be incorporated into gradient-based optimization algorithms that are efficient in solving inverse problems such as optimal control and motion planning. Simulating deformable objects is, however, more challenging compared to rigid body dynamics. The underlying physical laws of deformable objects are more complex, and the resulting systems have orders of magnitude more degrees of freedom and therefore they are significantly more computationally expensive to simulate. Computing gradients with respect to physical design or controller parameters is typically even more computationally challenging. In this paper, we propose a real-time, differentiable hybrid Lagrangian-Eulerian physical simulator for deformable objects, ChainQueen, based on the Moving Least Squares Material Point Method (MLS-MPM). MLS-MPM can simulate deformable objects including contact and can be seamlessly incorporated into inference, control and co-design systems. We demonstrate that our simulator achieves high precision in both forward simulation and backward gradient computation. We have successfully employed it in a diverse set of control tasks for soft robots, including problems with nearly 3,000 decision variables.

Spatial computing is a technological advancement that facilitates the seamless integration of devices into the physical environment, resulting in a more natural and intuitive digital world user experience. Spatial computing has the potential to become a significant advancement in the field of computing. From GPS and location-based services to healthcare, spatial computing technologies have influenced and improved our interactions with the digital world. The use of spatial computing in creating interactive digital environments has become increasingly popular and effective. This is explained by its increasing significance among researchers and industrial organisations, which motivated us to conduct this review. This review provides a detailed overview of spatial computing, including its enabling technologies and its impact on various applications. Projects related to spatial computing are also discussed. In this review, we also explored the potential challenges and limitations of spatial computing. Furthermore, we discuss potential solutions and future directions. Overall, this paper aims to provide a comprehensive understanding of spatial computing, its enabling technologies, their impact on various applications, emerging challenges, and potential solutions.

Complementary metal-oxide semiconductor (CMOS) technology has radically reshaped the world by taking humanity to the digital age. Cramming more transistors into the same physical space has enabled an exponential increase in computational performance, a strategy that has been recently hampered by the increasing complexity and cost of miniaturization. To continue achieving significant gains in computing performance, new computing paradigms, such as quantum computing, must be developed. However, finding the optimal physical system to process quantum information, and scale it up to the large number of qubits necessary to build a general-purpose quantum computer, remains a significant challenge. Recent breakthroughs in nanodevice engineering have shown that qubits can now be manufactured in a similar fashion to silicon field-effect transistors, opening an opportunity to leverage the know-how of the CMOS industry to address the scaling challenge. In this article, we focus on the analysis of the scaling prospects of quantum computing systems based on CMOS technology.

A major challenge in deploying world models is the trade-off between size and performance. Large world models can capture rich physical dynamics but require massive computing resources, making them impractical for edge devices. Small world models are easier to deploy but often struggle to learn accurate physics, leading to poor predictions. We propose the Physics-Informed BEV World Model (PIWM), a compact model designed to efficiently capture physical interactions in bird's-eye-view (BEV) representations. PIWM uses Soft Mask during training to improve dynamic object modeling and future prediction. We also introduce a simple yet effective technique, Warm Start, for inference to enhance prediction quality with a zero-shot model. Experiments show that at the same parameter scale (400M), PIWM surpasses the baseline by 60.6% in weighted overall score. Moreover, even when compared with the largest baseline model (400M), the smallest PIWM (130M Soft Mask) achieves a 7.4% higher weighted overall score with a 28% faster inference speed.

Future developments in artificial intelligence will profit from the existence of novel, non-traditional substrates for brain-inspired computing. Neuromorphic computers aim to provide such a substrate that reproduces the brain's capabilities in terms of adaptive, low-power information processing. We present results from a prototype chip of the BrainScaleS-2 mixed-signal neuromorphic system that adopts a physical-model approach with a 1000-fold acceleration of spiking neural network dynamics relative to biological real time. Using the embedded plasticity processor, we both simulate the Pong arcade video game and implement a local plasticity rule that enables reinforcement learning, allowing the on-chip neural network to learn to play the game. The experiment demonstrates key aspects of the employed approach, such as accelerated and flexible learning, high energy efficiency and resilience to noise.

Many machine learning algorithms rely on the Fourier transform, which is also the inner core of many analog computing devices and, specifically, of optical computing. The square of the modulus of the Fourier spectrum naturally maps onto pairwise interactions, as in the renowned Ising model, making it applicable to combinatorial optimization. Here we show how the nonlinear Fourier transform, related to integrable nonlinear partial differential equations, significantly widens the computational capability and also enables a wide variety of computing gates. We study specifically the case of the nonlinear Schrödinger equation; we introduce an input composed by ``tokens'', i.e., batches of information encoded in a multi-step potential, and we show how the nonlinear spectral computing arising in the wave propagation not only generalizes combinatorial optimization to higher order problems, but also realizes boolean gates. In the weakly nonlinear regime, nonlinearity generates higher-order interactions as perturbative corrections to the pairwise terms. In the solitonic regime, the discrete nonlinear spectrum performs digital computation through soliton generation. By using four input tokens, we demonstrate the programmability of all 256 Boolean functions of three variables, including 3-SAT instances. Our results show that integrable nonlinear propagation provides an unprecedented single physical platform for higher-order and logical computation, opening the way to a rich variety of new algorithms for analog computing, machine learning, and classical and quantum information processing.

Radio Frequency Neural Networks (RFNNs) have demonstrated advantages in realizing intelligent applications across various domains. However, as the model size of deep neural networks rapidly increases, implementing large-scale RFNN in practice requires an extensive number of RF interferometers and consumes a substantial amount of energy. To address this challenge, we propose to utilize low-rank decomposition to transform a large-scale RFNN into a compact RFNN while almost preserving its accuracy. Specifically, we develop a Tensor-Train RFNN (TT-RFNN) where each layer comprises a sequence of low-rank third-order tensors, leading to a notable reduction in parameter count, thereby optimizing RF interferometer utilization in comparison to the original large-scale RFNN. Additionally, considering the inherent physical errors when mapping TT-RFNN to RF device parameters in real-world deployment, from a general perspective, we construct the Robust TT-RFNN (RTT-RFNN) by incorporating a robustness solver on TT-RFNN to enhance its robustness. To adapt the RTT-RFNN to varying requirements of reshaping operations, we further provide a reconfigurable reshaping solution employing RF switch matrices. Empirical evaluations conducted on MNIST and CIFAR-10 datasets show the effectiveness of our proposed method.

In this work, we generalize the reaction-diffusion equation in statistical physics, Schr\"odinger equation in quantum mechanics, Helmholtz equation in paraxial optics into the neural partial differential equations (NPDE), which can be considered as the fundamental equations in the field of artificial intelligence research. We take finite difference method to discretize NPDE for finding numerical solution, and the basic building blocks of deep neural network architecture, including multi-layer perceptron, convolutional neural network and recurrent neural networks, are generated. The learning strategies, such as Adaptive moment estimation, L-BFGS, pseudoinverse learning algorithms and partial differential equation constrained optimization, are also presented. We believe it is of significance that presented clear physical image of interpretable deep neural networks, which makes it be possible for applying to analog computing device design, and pave the road to physical artificial intelligence.

Artificial neural networks have become a staple computing technique in many fields. Yet, they present fundamental differences with classical computing hardware in the way they process information. Photonic implementations of neural network architectures potentially offer fundamental advantages over their electronic counterparts in terms of speed, processing parallelism, scalability and energy efficiency. Scalable and high performance photonic neural networks (PNNs) have been demonstrated, yet they remain scarce. In this work, we study the performance of such a scalable, fully parallel and autonomous PNN based on a large area vertical-cavity surface-emitting laser (LA-VCSEL). We show how the performance varies with different physical parameters, namely, injection wavelength, injection power, and bias current. Furthermore, we link these physical parameters to the general computational measures of consistency and dimensionality. We present a general method of gauging dimensionality in high dimensional nonlinear systems subject to noise, which could be applied to many systems in the context of neuromorphic computing. Our work will inform future implementations of spatially multiplexed VCSEL PNNs.

We introduce a novel dataset designed to benchmark the physical and spatial reasoning capabilities of Large Language Models (LLM) based on topology optimization, a method for computing optimal material distributions within a design space under prescribed loads and supports. In this dataset, LLMs are provided with conditions such as 2D boundary, applied forces and supports, and must reason about the resulting optimal material distribution. The dataset includes a variety of tasks, ranging from filling in masked regions within partial structures to predicting complete material distributions. Solving these tasks requires understanding the flow of forces and the required material distribution under given constraints, without access to simulation tools or explicit physical models, challenging models to reason about structural stability and spatial organization. Our dataset targets the evaluation of spatial and physical reasoning abilities in 2D settings, offering a complementary perspective to traditional language and logic benchmarks.

As the demand to integrate Artificial Intelligence into high-stakes environments continues to grow, explaining the reasoning behind neural-network predictions has shifted from a theoretical curiosity to a strict operational requirement. Our work is motivated by the explanations of autoregressive neural predictions on dynamic physical fields, as in weather forecasting. Gradient-based feature attribution methods are widely used to explain the predictions on such data, in particular due to their scalability to high-dimensional inputs. It is also interesting to remark that gradient-based techniques such as SmoothGrad are now standard on images to robustify the explanations using pointwise averages of the attribution maps obtained from several noised inputs. Our goal is to efficiently adapt this aggregation strategy to dynamic physical fields. To do so, our first contribution is to identify a fundamental failure mode when averaging perturbed attribution maps on dynamic physical fields: stochastic input perturbations do not induce stationary amplitude noise in attribution maps, but instead cause a geometric displacement of the attributions. Consequently, pointwise averaging blurs these spatially misaligned features. To tackle this issue, we introduce WassersteinGrad, which extracts a geometric consensus of perturbed attribution maps by computing their entropic Wasserstein barycenter. The results, obtained on regional weather data and a meteorologist-validated neural model, demonstrate promising explainability properties of WassersteinGrad over gradient-based baselines across both single-step and autoregressive forecasting settings.

Transportation Cyber-Physical Systems (T-CPS) enhance safety and mobility by integrating cyber and physical transportation systems. A key component of T-CPS is the Digital Twin (DT), a virtual representation that enables simulation, analysis, and optimization through real-time data exchange and communication. Although existing studies have explored DTs for vehicles, communications, pedestrians, and traffic, real-world validations and implementations of DTs that encompass infrastructure, vehicles, signals, communications, and more remain limited due to several challenges. These include accessing real-world connected infrastructure, integrating heterogeneous, multi-sourced data, ensuring real-time data processing, and synchronizing the digital and physical systems. To address these challenges, this study develops a traffic DT based on a real-world connected vehicle corridor. Leveraging the Cellular Vehicle-to-Everything (C-V2X) infrastructure in the corridor, along with communication, computing, and simulation technologies, the proposed DT accurately replicates physical vehicle behaviors, signal timing, communications, and traffic patterns within the virtual environment. Building upon the previous data pipeline, the digital system ensures robust synchronization with the physical environment. Moreover, the DT's scalable and redundant architecture enhances data integrity, making it capable of supporting future large-scale C-V2X deployments. Furthermore, its ability to provide feedback to the physical system is demonstrated through applications such as signal timing adjustments, vehicle advisory messages, and incident notifications. The proposed DT is a vital tool in T-CPS, enabling real-time traffic monitoring, prediction, and optimization to enhance the reliability and safety of transportation systems.

Foundation models have revolutionized language modeling, while whether this success is replicated in scientific computing remains unexplored. We present OmniArch, the first prototype aiming at solving multi-scale and multi-physics scientific computing problems with physical alignment. We addressed all three challenges with one unified architecture. Its pre-training stage contains a Fourier Encoder-decoder fading out the disharmony across separated dimensions and a Transformer backbone integrating quantities through temporal dynamics, and the novel PDE-Aligner performs physics-informed fine-tuning under flexible conditions. As far as we know, we first conduct 1D-2D-3D united pre-training on the PDEBench, and it sets not only new performance benchmarks for 1D, 2D, and 3D PDEs but also demonstrates exceptional adaptability to new physics via in-context and zero-shot learning approaches, which supports realistic engineering applications and foresight physics discovery.

While complex simulations of physical systems have been widely used in engineering and scientific computing, lowering their often prohibitive computational requirements has only recently been tackled by deep learning approaches. In this paper, we present GraphSplineNets, a novel deep-learning method to speed up the forecasting of physical systems by reducing the grid size and number of iteration steps of deep surrogate models. Our method uses two differentiable orthogonal spline collocation methods to efficiently predict response at any location in time and space. Additionally, we introduce an adaptive collocation strategy in space to prioritize sampling from the most important regions. GraphSplineNets improve the accuracy-speedup tradeoff in forecasting various dynamical systems with increasing complexity, including the heat equation, damped wave propagation, Navier-Stokes equations, and real-world ocean currents in both regular and irregular domains.

Fault-tolerant quantum computing (FTQC) relies on quantum error correction to suppress physical errors and preserve logical information at scale. In practice, however, performance is constrained not only by physical noise but also by the latency of classical decoders processing rapidly generated syndrome data. This challenge is exacerbated by hardware noise that is strong, heterogeneous, and nonstationary, as well as by the simulation-to-hardware distribution shift that can substantially degrade fixed neural decoders. We present QAdapt, a noise-adaptive neural pre-decoding framework for surface-code quantum error correction. QAdapt captures local spatiotemporal correlations in syndrome data, sequentially adapts to evolving noise conditions while mitigating catastrophic forgetting, and forwards the residual syndrome to a conventional global decoder. Across 110 synthetic out-of-distribution noise configurations for rotated surface-code memory circuits, QAdapt consistently reduces the logical error rate relative to the neural pre-decoding baseline. On Google's Willow benchmark data, without target-domain fine-tuning, it achieves reductions of up to 5.79 percent in logical error rate and 9.32 percent in backend decoding latency on the residual syndrome. These results demonstrate that QAdapt provides a practical and decoder-compatible approach to improving the robustness and backend decoding efficiency of quantum error correction under evolving hardware noise.

Fault-tolerant quantum computing will require error rates far below those achievable with physical qubits. Quantum error correction (QEC) bridges this gap, but depends on decoders being simultaneously fast, accurate, and scalable. This combination of requirements remains unmet by a machine-learning decoder, nor by any decoder for promising resource-efficient codes such as the color code. Here we introduce AlphaQubit 2, a neural-network decoder that achieves near-optimal logical error rates for both surface and color codes at scale under realistic noise. For the color code, it is orders of magnitude faster than other high-accuracy decoders. We demonstrate real-time decoding faster than 1μs per cycle on commercial accelerators: for the surface code to distance 11, with better accuracy than leading real-time decoders; and the first real-time decoding of the color code to distance 9. These results support the practical application of a wider class of promising QEC codes, and establish a credible path towards high-accuracy, real-time neural decoding at the scales required for fault-tolerant quantum computation.

Machine learning based solvers have garnered much attention in physical simulation and scientific computing, with a prominent example, physics-informed neural networks (PINNs). However, PINNs often struggle to solve high-frequency and multi-scale PDEs, which can be due to spectral bias during neural network training. To address this problem, we resort to the Gaussian process (GP) framework. To flexibly capture the dominant frequencies, we model the power spectrum of the PDE solution with a student t mixture or Gaussian mixture. We apply the inverse Fourier transform to obtain the covariance function (by Wiener-Khinchin theorem). The covariance derived from the Gaussian mixture spectrum corresponds to the known spectral mixture kernel. Next, we estimate the mixture weights in the log domain, which we show is equivalent to placing a Jeffreys prior. It automatically induces sparsity, prunes excessive frequencies, and adjusts the remaining toward the ground truth. Third, to enable efficient and scalable computation on massive collocation points, which are critical to capture high frequencies, we place the collocation points on a grid, and multiply our covariance function at each input dimension. We use the GP conditional mean to predict the solution and its derivatives so as to fit the boundary condition and the equation itself. As a result, we can derive a Kronecker product structure in the covariance matrix. We use Kronecker product properties and multilinear algebra to promote computational efficiency and scalability, without low-rank approximations. We show the advantage of our method in systematic experiments. The code is released at https://github.com/xuangu-fang/Gaussian-Process-Slover-for-High-Freq-PDE.

We introduce fusion-based quantum computing (FBQC) - a model of universal quantum computation in which entangling measurements, called fusions, are performed on the qubits of small constant-sized entangled resource states. We introduce a stabilizer formalism for analyzing fault tolerance and computation in these schemes. This framework naturally captures the error structure that arises in certain physical systems for quantum computing, such as photonics. FBQC can offer significant architectural simplifications, enabling hardware made up of many identical modules, requiring an extremely low depth of operations on each physical qubit and reducing classical processing requirements. We present two pedagogical examples of fault-tolerant schemes constructed in this framework and numerically evaluate their threshold under a hardware agnostic fusion error model including both erasure and Pauli error. We also study an error model of linear optical quantum computing with probabilistic fusion and photon loss. In FBQC the non-determinism of fusion is directly dealt with by the quantum error correction protocol, along with other errors. We find that tailoring the fault-tolerance framework to the physical system allows the scheme to have a higher threshold than schemes reported in literature. We present a ballistic scheme which can tolerate a 10.4% probability of suffering photon loss in each fusion.

Quantum error correction provides a path to reach practical quantum computing by combining multiple physical qubits into a logical qubit, where the logical error rate is suppressed exponentially as more qubits are added. However, this exponential suppression only occurs if the physical error rate is below a critical threshold. In this work, we present two surface code memories operating below this threshold: a distance-7 code and a distance-5 code integrated with a real-time decoder. The logical error rate of our larger quantum memory is suppressed by a factor of Λ = 2.14 pm 0.02 when increasing the code distance by two, culminating in a 101-qubit distance-7 code with 0.143% pm 0.003% error per cycle of error correction. This logical memory is also beyond break-even, exceeding its best physical qubit's lifetime by a factor of 2.4 pm 0.3. We maintain below-threshold performance when decoding in real time, achieving an average decoder latency of 63 μs at distance-5 up to a million cycles, with a cycle time of 1.1 μs. To probe the limits of our error-correction performance, we run repetition codes up to distance-29 and find that logical performance is limited by rare correlated error events occurring approximately once every hour, or 3 times 10^9 cycles. Our results present device performance that, if scaled, could realize the operational requirements of large scale fault-tolerant quantum algorithms.

In this paper, we present TailorNet, a neural model which predicts clothing deformation in 3D as a function of three factors: pose, shape and style (garment geometry), while retaining wrinkle detail. This goes beyond prior models, which are either specific to one style and shape, or generalize to different shapes producing smooth results, despite being style specific. Our hypothesis is that (even non-linear) combinations of examples smooth out high frequency components such as fine-wrinkles, which makes learning the three factors jointly hard. At the heart of our technique is a decomposition of deformation into a high frequency and a low frequency component. While the low-frequency component is predicted from pose, shape and style parameters with an MLP, the high-frequency component is predicted with a mixture of shape-style specific pose models. The weights of the mixture are computed with a narrow bandwidth kernel to guarantee that only predictions with similar high-frequency patterns are combined. The style variation is obtained by computing, in a canonical pose, a subspace of deformation, which satisfies physical constraints such as inter-penetration, and draping on the body. TailorNet delivers 3D garments which retain the wrinkles from the physics based simulations (PBS) it is learned from, while running more than 1000 times faster. In contrast to PBS, TailorNet is easy to use and fully differentiable, which is crucial for computer vision algorithms. Several experiments demonstrate TailorNet produces more realistic results than prior work, and even generates temporally coherent deformations on sequences of the AMASS dataset, despite being trained on static poses from a different dataset. To stimulate further research in this direction, we will make a dataset consisting of 55800 frames, as well as our model publicly available at https://virtualhumans.mpi-inf.mpg.de/tailornet.

Machine learning is a promising application of quantum computing, but challenges remain as near-term devices will have a limited number of physical qubits and high error rates. Motivated by the usefulness of tensor networks for machine learning in the classical context, we propose quantum computing approaches to both discriminative and generative learning, with circuits based on tree and matrix product state tensor networks that could have benefits for near-term devices. The result is a unified framework where classical and quantum computing can benefit from the same theoretical and algorithmic developments, and the same model can be trained classically then transferred to the quantum setting for additional optimization. Tensor network circuits can also provide qubit-efficient schemes where, depending on the architecture, the number of physical qubits required scales only logarithmically with, or independently of the input or output data sizes. We demonstrate our proposals with numerical experiments, training a discriminative model to perform handwriting recognition using a optimization procedure that could be carried out on quantum hardware, and testing the noise resilience of the trained model.

Natural disasters not only cause large-scale physical destruction, but also cascading social consequences that are difficult to quantify with traditional surveys and reports. Social media platforms offer an alternative perspective that captures multimodal, real-time, and user-generated content that can be leveraged for disaster impacts. In this paper, we introduce DisImpact, a two-stage framework that systematically quantifies the physi-social impacts of disasters via a Multimodal Large Language Model (MLLM). The social media posts are first classified into ten disaster impact categories that cover both physical and social domains. We then construct a disaster impact index that integrates the relative prominence of each category with the intensity of public engagement on a weekly basis. This design provides a unified scale for representing disaster impacts across both individual disaster impact categories and the broader physical and social domains. The unified representation enables direct comparison across categories and allows the impacts to be flexibly aggregated to reveal higher-level patterns and overall trends. We validate the impact indices against authoritative ground-truth data, including FEMA Public Assistance data and NASA FIRMS fire detections, observing consistent lead-lag correlations that demonstrate strong validity across both social and physical impact dimensions. We further conduct temporal and spatial analyses, and the results show that physical impacts are often peak during the disasters and localized in regions that are directly affected by disasters, while social impacts often emerge later and spread more broadly across time and space. To the best of our knowledge, this is the first framework to comprehensively quantify disaster impacts across their physical and social dimensions using multimodal data from multiple social media platforms.

Artificial Intelligence and Machine learning have been widely used in various fields of mathematical computing, physical modeling, computational science, communication science, and stochastic analysis. Approaches based on Deep Artificial Neural Networks (DANN) are very popular in our days. Depending on the learning task, the exact form of DANNs is determined via their multi-layer architecture, activation functions and the so-called loss function. However, for a majority of deep learning approaches based on DANNs, the kernel structure of neural signal processing remains the same, where the node response is encoded as a linear superposition of neural activity, while the non-linearity is triggered by the activation functions. In the current paper, we suggest to analyze the neural signal processing in DANNs from the point of view of homogeneous chaos theory as known from polynomial chaos expansion (PCE). From the PCE perspective, the (linear) response on each node of a DANN could be seen as a 1^{st} degree multi-variate polynomial of single neurons from the previous layer, i.e. linear weighted sum of monomials. From this point of view, the conventional DANN structure relies implicitly (but erroneously) on a Gaussian distribution of neural signals. Additionally, this view revels that by design DANNs do not necessarily fulfill any orthogonality or orthonormality condition for a majority of data-driven applications. Therefore, the prevailing handling of neural signals in DANNs could lead to redundant representation as any neural signal could contain some partial information from other neural signals. To tackle that challenge, we suggest to employ the data-driven generalization of PCE theory known as arbitrary polynomial chaos (aPC) to construct a corresponding multi-variate orthonormal representations on each node of a DANN to obtain Deep arbitrary polynomial chaos neural networks.

This short Perspective article presents an overview of the discovery of topological π modes as well as their physical significance in quantum computing and the understanding of an exotic phase of matter, i.e., the Floquet time crystal. The recent proposals of 2π/k modes as the generalizations of π modes are further elucidated.

The growing demand for high-fidelity 4D hand-object interaction (HOI) data in embodied AI and spatial computing is currently bottlenecked by the reliance on pre-scanned object templates and physical markers. While recent methods have demonstrated promising results in reconstructing 4D hand-object interaction from videos, they are highly sensitive to initial estimates of hand and object poses. Yet, estimating these poses from images is challenging, in particular under severe occlusion which is inherent in hand-object interaction scenarios. We propose a novel system for the robust and accurate reconstruction of hands and objects from synchronized and calibrated multi-view videos without requiring any templates or markers. Our system consists of two main components with key innovations: (1) a multi-view feed-forward transformer model that aggregates cross-view geometry and temporal cues to provide a reliable, metric-consistent initialization for both poses and dense object geometry, and (2) a hand-object physics-aware Gaussian-based optimization framework to refine the initial estimates, integrating tetrahedral constraints, collision refinement, and appearance decomposition to produce physically plausible and visually accurate reconstruction. Validated on public benchmarks and an extensive internal dataset, our pipeline achieves highly robust, artifact-free reconstruction, providing an efficient foundation for automated 4D asset generation. Our project page are available at https://zyshen021.github.io/HOSTPG/.

In order to bring quantum networks into the real world, we would like to determine the requirements of quantum network protocols including the underlying quantum hardware. Because detailed architecture proposals are generally too complex for mathematical analysis, it is natural to employ numerical simulation. Here we introduce NetSquid, the NETwork Simulator for QUantum Information using Discrete events, a discrete-event based platform for simulating all aspects of quantum networks and modular quantum computing systems, ranging from the physical layer and its control plane up to the application level. We study several use cases to showcase NetSquid's power, including detailed physical layer simulations of repeater chains based on nitrogen vacancy centres in diamond as well as atomic ensembles. We also study the control plane of a quantum switch beyond its analytically known regime, and showcase NetSquid's ability to investigate large networks by simulating entanglement distribution over a chain of up to one thousand nodes.

Scientific software presents a demanding test for computer-using agents based on visual language models (VLMs): completing a research workflow requires interpreting specialized interfaces, manipulating scientific objects, and producing verifiable results. We thus introduce OSWorld-Science, a benchmark and evaluation environment that combines scientifically meaningful tasks, artifact-based evaluation, and an efficient agent harness for studying computer use in the scientific domain. The benchmark contains 12 VLMs and 146 high-quality tasks across several scientific domains and software configurations, covering workflows such as molecular drawing and retrosynthesis, pathology image analysis, statistical computing, and physical simulation. Tasks are developed through expert proposals and iterative human--AI co-design, with selection guided by scientific value and difficulty. Task-specific execution-based evaluators inspect application states and generated artifacts, including molecular structures, segmentation masks, plots, and numerical results, and award partial credit for incomplete outcomes. Our special harness integrates model adapters, interaction-loop control, and trajectory logging to support comparisons of models and interaction strategies. Our results show that current state-of-the-art VLMs with a strong harness still face challenges in addressing key questions in the scientific domains. We also analyze the benchmarking results across multi-linguistics, reasoning efforts, context length and other factors and derive several important conclusions and directions to assist future development. Overall, we provide an integrated framework connecting expert-defined scientific goals to verifiable software outcomes, enabling systematic evaluation of both agent capabilities and harness design in scientific workflows.

Resided at the intersection of multi-fidelity optimization (MFO) and Bayesian optimization (BO), MF BO has found a niche in solving expensive engineering design optimization problems, thanks to its advantages in incorporating physical and mathematical understandings of the problems, saving resources, addressing exploitation-exploration trade-off, considering uncertainty, and processing parallel computing. The increasing number of works dedicated to MF BO suggests the need for a comprehensive review of this advanced optimization technique. In this paper, we survey recent developments of two essential ingredients of MF BO: Gaussian process (GP) based MF surrogates and acquisition functions. We first categorize the existing MF modeling methods and MFO strategies to locate MF BO in a large family of surrogate-based optimization and MFO algorithms. We then exploit the common properties shared between the methods from each ingredient of MF BO to describe important GP-based MF surrogate models and review various acquisition functions. By doing so, we expect to provide a structured understanding of MF BO. Finally, we attempt to reveal important aspects that require further research for applications of MF BO in solving intricate yet important design optimization problems, including constrained optimization, high-dimensional optimization, optimization under uncertainty, and multi-objective optimization.

Machine learning approaches to spatiotemporal physical systems have primarily focused on next-frame prediction, with the goal of learning an accurate emulator for the system's evolution in time. However, these emulators are computationally expensive to train and are subject to performance pitfalls, such as compounding errors during autoregressive rollout. In this work, we take a different perspective and look at scientific tasks further downstream of predicting the next frame, such as estimation of a system's governing physical parameters. Accuracy on these tasks offers a uniquely quantifiable glimpse into the physical relevance of the representations of these models. We evaluate the effectiveness of general-purpose self-supervised methods in learning physics-grounded representations that are useful for downstream scientific tasks. Surprisingly, we find that not all methods designed for physical modeling outperform generic self-supervised learning methods on these tasks, and methods that learn in the latent space (e.g., joint embedding predictive architectures, or JEPAs) outperform those optimizing pixel-level prediction objectives. Code is available at https://github.com/helenqu/physical-representation-learning.

Recent advances of data-driven machine learning have revolutionized fields like computer vision, reinforcement learning, and many scientific and engineering domains. In many real-world and scientific problems, systems that generate data are governed by physical laws. Recent work shows that it provides potential benefits for machine learning models by incorporating the physical prior and collected data, which makes the intersection of machine learning and physics become a prevailing paradigm. By integrating the data and mathematical physics models seamlessly, it can guide the machine learning model towards solutions that are physically plausible, improving accuracy and efficiency even in uncertain and high-dimensional contexts. In this survey, we present this learning paradigm called Physics-Informed Machine Learning (PIML) which is to build a model that leverages empirical data and available physical prior knowledge to improve performance on a set of tasks that involve a physical mechanism. We systematically review the recent development of physics-informed machine learning from three perspectives of machine learning tasks, representation of physical prior, and methods for incorporating physical prior. We also propose several important open research problems based on the current trends in the field. We argue that encoding different forms of physical prior into model architectures, optimizers, inference algorithms, and significant domain-specific applications like inverse engineering design and robotic control is far from being fully explored in the field of physics-informed machine learning. We believe that the interdisciplinary research of physics-informed machine learning will significantly propel research progress, foster the creation of more effective machine learning models, and also offer invaluable assistance in addressing long-standing problems in related disciplines.

As LLMs advance their reasoning capabilities about the physical world, the absence of rigorous benchmarks for evaluating their ability to generate scientifically valid physical models has become a critical gap. Computational mechanics, which develops and applies mathematical models and numerical methods to predict the behavior of physical systems under forces, deformation, and constraints, provides an ideal foundation for structured scientific reasoning evaluation. Problems follow clear mathematical structure, enforce strict physical and numerical constraints, and support objective verification. The discipline requires constructing explicit models of physical systems and reasoning about geometry, spatial relationships, and material behavior, connecting directly to emerging AI goals in physical reasoning and world modeling. We introduce FEM-Bench, a computational mechanics benchmark designed to evaluate the ability of LLMs to generate correct finite element method (FEM) and related code. FEM-Bench 2025 contains a suite of introductory but nontrivial tasks aligned with material from a first graduate course on computational mechanics. These tasks capture essential numerical and physical modeling challenges while representing only a small fraction of the complexity present in the discipline. Despite their simplicity, state-of-the-art LLMs do not reliably solve all of them. In a five attempt run, the best performing model at function writing, Gemini 3 Pro, completed 30/33 tasks at least once and 26/33 tasks all five times. The best performing model at unit test writing, GPT-5, had an Average Joint Success Rate of 73.8%. Other popular models showed broad performance variation. FEM-Bench establishes a structured foundation for evaluating AI-generated scientific code, and future iterations will incorporate increasingly sophisticated tasks to track progress as models evolve.

Physics reasoning requires constructing a consistent model of the underlying physical system rather than relying solely on symbolic or formula-based manipulation. Although large language models have shown strong ability in solving math and coding problems, they still struggle with physics problems, as these problems entangle the physical modeling process with mathematical calculations. Humans approach physics by first building a representation of the system before performing calculations. Inspired by this, we introduce a unified framework that distills intermediate representations that explicitly encode the physical modeling process and adopt a two-stage post-training strategy, where supervised fine-tuning establishes structured modeling, and reinforcement learning with rubric-based feedback improves the quality of the modeling process. Experiments on multiple multimodal physics benchmarks show that our approach leads to consistent improvements in reasoning performance across different models and datasets. On PhysReason, PhyX and SeePhys benchmarks, physical modeling output performs GRPO by an average ~3%, showing that explicit physical modeling is an efficient strategy of improving physics reasoning for small LLMs.

Exponential increases in scientific experimental data are outstripping the rate of progress in silicon technology. As a result, heterogeneous combinations of architectures and process or device technologies are increasingly important to meet the computing demands of future scientific experiments. However, the complexity of heterogeneous computing systems requires systematic modeling to understand performance. We present a model which addresses this need by framing key aspects of data collection pipelines and constraints, and combines them with the important vectors of technology that shape alternatives, computing metrics that allow complex alternatives to be compared. For instance, a data collection pipeline may be characterized by parameters such as sensor sampling rates, amount of data collected, and the overall relevancy of retrieved samples. Alternatives to this pipeline are enabled by hardware development vectors including advancing CMOS, GPUs, neuromorphic computing, and edge computing. By calculating metrics for each alternative such as overall F1 score, power, hardware cost, and energy expended per relevant sample, this model allows alternate data collection systems to be rigorously compared. To demonstrate this model's capability, we apply it to the CMS experiment (and planned HL-LHC upgrade) to evaluate and compare the application of novel technologies in the data acquisition system (DAQ). We demonstrate that improvements to early stages in the DAQ are highly beneficial, greatly reducing the resources required at later stages of processing (such as a 60% power reduction) and increasing the amount of relevant data retrieved from the experiment per unit power (improving from 0.065 to 0.31 samples/kJ) However, we predict further advances will be required in order to meet overall power and cost constraints for the DAQ.

Printed Electronics (PE) stands out as a promisingtechnology for widespread computing due to its distinct attributes, such as low costs and flexible manufacturing. Unlike traditional silicon-based technologies, PE enables stretchable, conformal,and non-toxic hardware. However, PE are constrained by larger feature sizes, making it challenging to implement complex circuits such as machine learning (ML) classifiers. Approximate computing has been proven to reduce the hardware cost of ML circuits such as Multilayer Perceptrons (MLPs). In this paper, we maximize the benefits of approximate computing by integrating hardware approximation into the MLP training process. Due to the discrete nature of hardware approximation, we propose and implement a genetic-based, approximate, hardware-aware training approach specifically designed for printed MLPs. For a 5% accuracy loss, our MLPs achieve over 5x area and power reduction compared to the baseline while outperforming state of-the-art approximate and stochastic printed MLPs.

Physical AI aims to develop models that can perceive and predict real-world dynamics; yet, the extent to which current multi-modal large language models and video generative models support these abilities is insufficiently understood. We introduce Physical AI Bench (PAI-Bench), a unified and comprehensive benchmark that evaluates perception and prediction capabilities across video generation, conditional video generation, and video understanding, comprising 2,808 real-world cases with task-aligned metrics designed to capture physical plausibility and domain-specific reasoning. Our study provides a systematic assessment of recent models and shows that video generative models, despite strong visual fidelity, often struggle to maintain physically coherent dynamics, while multi-modal large language models exhibit limited performance in forecasting and causal interpretation. These observations suggest that current systems are still at an early stage in handling the perceptual and predictive demands of Physical AI. In summary, PAI-Bench establishes a realistic foundation for evaluating Physical AI and highlights key gaps that future systems must address.

Developing physically aware video generation models remains a significant challenge due to the difficulty in capturing diverse physical phenomena, such as thermal dynamics, mechanics, and optics. In this work, we introduce PhysRAG, a novel pipeline that enhances physical awareness in video generation through Retrieval-Augmented Generation (RAG). To address the issue of limited high-quality data, we design a two-stage data filtering pipeline based on the WISA-80K dataset, resulting in a curated set of 7K high-quality videos for training. Furthermore, we construct a physical video database and develop a mechanism to inject physical knowledge into a video diffusion model using learnable queries. Our method achieves state-of-the-art performance in both visual quality and physical rule compliance, surpassing existing models in benchmarks such as PhyGenBench and VBench. We conduct extensive ablation studies to validate the effectiveness of our key components, including the data filtering pipeline, RAG mechanism, and method for physical information extraction. To facilitate future research, our code, data, and models are prepared for release at https://github.com/sediment1024/PhysRAG.

Physical AI systems increasingly map multimodal observations, language instructions, and learned world representations into physically consequential actions. Robotics foundation models, vision-language-action models, and world-model-based autonomous systems can condition decisions that move vehicles, robots, drones, and industrial machines. This transition exposes a safety problem that is not fully captured by conventional AI content moderation or by classical robot safety alone: a black-box model may issue a physically consequential action while appearing confident, plausible, and semantically aligned. The resulting failure can be silent, arising from sensor drift, occlusion, state-estimation error, distribution shift, hallucinated affordances, or invalid physical assumptions before downstream hardware controllers detect a violation. Across embodied foundation models, world models, robotics simulation, embodied safety benchmarks, safe control, runtime assurance, uncertainty estimation, verification, and guardrail evaluation, model capability and safety mechanisms have advanced along largely separate technical tracks. A recurring gap synthesized here is that no single stream surveyed in this review supplies a complete runtime authorization boundary between black-box Physical AI models and physical execution. The resulting analysis develops a bounded problem formulation, a definition of silent physical-action failure, a taxonomy of runtime guardrail functions, and evaluation requirements for comparing guardrails as Physical AI assurance mechanisms.

We introduce PHYBench, a novel, high-quality benchmark designed for evaluating reasoning capabilities of large language models (LLMs) in physical contexts. PHYBench consists of 500 meticulously curated physics problems based on real-world physical scenarios, designed to assess the ability of models to understand and reason about realistic physical processes. Covering mechanics, electromagnetism, thermodynamics, optics, modern physics, and advanced physics, the benchmark spans difficulty levels from high school exercises to undergraduate problems and Physics Olympiad challenges. Additionally, we propose the Expression Edit Distance (EED) Score, a novel evaluation metric based on the edit distance between mathematical expressions, which effectively captures differences in model reasoning processes and results beyond traditional binary scoring methods. We evaluate various LLMs on PHYBench and compare their performance with human experts. Our results reveal that even state-of-the-art reasoning models significantly lag behind human experts, highlighting their limitations and the need for improvement in complex physical reasoning scenarios. Our benchmark results and dataset are publicly available at https://phybench-official.github.io/phybench-demo/.

Recent years have witnessed the outstanding success of deep learning in various fields such as vision and natural language processing. This success is largely indebted to the massive size of deep learning models that is expected to increase unceasingly. This growth of the deep learning models is accompanied by issues related to their considerable energy consumption, both during the training and inference phases, as well as their scalability. Although a number of work based on unconventional physical systems have been proposed which addresses the issue of energy efficiency in the inference phase, efficient training of deep learning models has remained unaddressed. So far, training of digital deep learning models mainly relies on backpropagation, which is not suitable for physical implementation as it requires perfect knowledge of the computation performed in the so-called forward pass of the neural network. Here, we tackle this issue by proposing a simple deep neural network architecture augmented by a biologically plausible learning algorithm, referred to as "model-free forward-forward training". The proposed architecture enables training deep physical neural networks consisting of layers of physical nonlinear systems, without requiring detailed knowledge of the nonlinear physical layers' properties. We show that our method outperforms state-of-the-art hardware-aware training methods by improving training speed, decreasing digital computations, and reducing power consumption in physical systems. We demonstrate the adaptability of the proposed method, even in systems exposed to dynamic or unpredictable external perturbations. To showcase the universality of our approach, we train diverse wave-based physical neural networks that vary in the underlying wave phenomenon and the type of non-linearity they use, to perform vowel and image classification tasks experimentally.

Digital twins, as precise digital representations of physical systems, have evolved from passive simulation tools into intelligent and autonomous entities through the integration of artificial intelligence technologies. This paper presents a unified four-stage framework that systematically characterizes AI integration across the digital twin lifecycle, spanning modeling, mirroring, intervention, and autonomous management. By synthesizing existing technologies and practices, we distill a unified four-stage framework that systematically characterizes how AI methodologies are embedded across the digital twin lifecycle: (1) modeling the physical twin through physics-based and physics-informed AI approaches, (2) mirroring the physical system into a digital twin with real-time synchronization, (3) intervening in the physical twin through predictive modeling, anomaly detection, and optimization strategies, and (4) achieving autonomous management through large language models, foundation models, and intelligent agents. We analyze the synergy between physics-based modeling and data-driven learning, highlighting the shift from traditional numerical solvers to physics-informed and foundation models for physical systems. Furthermore, we examine how generative AI technologies, including large language models and generative world models, transform digital twins into proactive and self-improving cognitive systems capable of reasoning, communication, and creative scenario generation. Through a cross-domain review spanning eleven application domains, including healthcare, aerospace, smart manufacturing, robotics, and smart cities, we identify common challenges related to scalability, explainability, and trustworthiness, and outline directions for responsible AI-driven digital twin systems.

Physical fidelity has received increasing attention in world models and video generation, yet how video representations encode physical information remains less understood. We introduce the World Embedding Benchmark, comprising 8,000 controlled simulation cases from 80 families spanning fluid mechanics, solid mechanics, dynamics, and optics & electromagnetism. Each case pairs a rendered video with simulation-derived physical annotations, supporting three complementary tasks: text-video retrieval, physical-property regression, and multiple-choice video-description pair classification. We use these tasks to distinguish cross-modal physical alignment from the recoverability of quantitative physical information. Evaluated pre-trained omnimodal embedding models show weak retrieval and near-chance within-family pair classification, while lightweight probes recover useful physical information from frozen video embeddings. Continual contrastive training with physics-specific video-text pairs improves retrieval and pair classification but degrades physical-property regression, revealing a trade-off between alignment and quantitative information recoverability. Finally, we use the embeddings to retrieve reference videos for retrieval-augmented generation with MiniMax-H3. Retrieved references improve the physical fidelity of generated videos, with stronger retrieval models yielding larger gains in our experiments. Together, these findings highlight the need to evaluate physical alignment and property recoverability jointly, and demonstrate the utility of physical representations for improving video generation.

Video generation models have achieved remarkable progress in creating high-quality, photorealistic content. However, their ability to accurately simulate physical phenomena remains a critical and unresolved challenge. This paper presents PhyWorldBench, a comprehensive benchmark designed to evaluate video generation models based on their adherence to the laws of physics. The benchmark covers multiple levels of physical phenomena, ranging from fundamental principles like object motion and energy conservation to more complex scenarios involving rigid body interactions and human or animal motion. Additionally, we introduce a novel ""Anti-Physics"" category, where prompts intentionally violate real-world physics, enabling the assessment of whether models can follow such instructions while maintaining logical consistency. Besides large-scale human evaluation, we also design a simple yet effective method that could utilize current MLLM to evaluate the physics realism in a zero-shot fashion. We evaluate 12 state-of-the-art text-to-video generation models, including five open-source and five proprietary models, with a detailed comparison and analysis. we identify pivotal challenges models face in adhering to real-world physics. Through systematic testing of their outputs across 1,050 curated prompts-spanning fundamental, composite, and anti-physics scenarios-we identify pivotal challenges these models face in adhering to real-world physics. We then rigorously examine their performance on diverse physical phenomena with varying prompt types, deriving targeted recommendations for crafting prompts that enhance fidelity to physical principles.

Evaluations of LLM planning agents largely ask whether a task succeeds or a declared plan is followed. In strategic cyber-physical systems, a stronger question is whether the planning architecture remains appropriate after autonomous participants respond and physics constrains the outcome. We introduce a controlled, physics-grounded benchmark built around planning-induced control trajectories: the ordered planning operations and directives through which an execution architecture acts on other agents and the physical process. It implements predefined, sequential, hierarchical, and search executors in a smart-grid demand-response system with 40 heterogeneous prosumers and an independently simulated radial feeder. The LLM is bounded to typed policy declaration and short operator messages, while schedule construction, prosumer dynamics, and power flow remain explicit code. The protocol uses paired forced-mode counterfactuals, common random response draws, and event-level deadline feasibility. Three properties follow. Architecture materially changes outcomes: forced search is the oracle in all five baseline seeds. Execution fidelity needs more than mode agreement: objective substitution holds agreement at 1.0 while increasing voltage shortfall by 2.68x. A 144-scenario, 576-episode bank has feasible oracles from three of the four architectures. A prespecified stress-held-out ridge has mean regret 90.7 (95% interval [73.8, 108.6]) and no detectable value over fixed sequential; applying known deadline feasibility before quality prediction cuts regret to 29.0 and improves over fixed sequential by 61.1. An all-feasible ablation does not beat fixed search, localising the remaining challenge to within-feasible quality selection. A five-model extension separates stress-conditioned, state-blind, and invariant declarers; latency tails show that live feasibility should be treated probabilistically.

Understanding the physical world is a fundamental challenge in embodied AI, critical for enabling agents to perform complex tasks and operate safely in real-world environments. While Vision-Language Models (VLMs) have shown great promise in reasoning and task planning for embodied agents, their ability to comprehend physical phenomena remains extremely limited. To close this gap, we introduce PhysBench, a comprehensive benchmark designed to evaluate VLMs' physical world understanding capability across a diverse set of tasks. PhysBench contains 10,002 entries of interleaved video-image-text data, categorized into four major domains: physical object properties, physical object relationships, physical scene understanding, and physics-based dynamics, further divided into 19 subclasses and 8 distinct capability dimensions. Our extensive experiments, conducted on 75 representative VLMs, reveal that while these models excel in common-sense reasoning, they struggle with understanding the physical world -- likely due to the absence of physical knowledge in their training data and the lack of embedded physical priors. To tackle the shortfall, we introduce PhysAgent, a novel framework that combines the generalization strengths of VLMs with the specialized expertise of vision models, significantly enhancing VLMs' physical understanding across a variety of tasks, including an 18.4\% improvement on GPT-4o. Furthermore, our results demonstrate that enhancing VLMs' physical world understanding capabilities can help embodied agents such as MOKA. We believe that PhysBench and PhysAgent offer valuable insights and contribute to bridging the gap between VLMs and physical world understanding.

Large Language Models (LLMs) can generate Computer-Aided Design (CAD), yet lack physical comprehension required for reliable engineering design. Instead of attempting to implicitly learn physical laws from data, we propose a Hybrid Agentic-Physical Architecture that embeds validated knowledge-based engineering tools directly into the decision making loop of autonomous AI agents. In this framework, engineering design is formulated as a closed-loop, sequential decision making process guided by explicit physical verification. Based on a load case, dedicated agents iteratively plan, generate, evaluate, and revise engineering designs using knowledge-based tools as a feedback signal. We introduce a benchmark dataset and metrics for assessing functional validity in generative CAD. Our system generates more complex and physically verified designs, with a 4.2 increase in structural complexity and improving compile rate by 3.5% compared to similar agentic methods. The codebase, prompts and dataset will be made publicly available to support reproducibility and future research.

Recent advancements in video generation have witnessed significant progress, especially with the rapid advancement of diffusion models. Despite this, their deficiencies in physical cognition have gradually received widespread attention - generated content often violates the fundamental laws of physics, falling into the dilemma of ''visual realism but physical absurdity". Researchers began to increasingly recognize the importance of physical fidelity in video generation and attempted to integrate heuristic physical cognition such as motion representations and physical knowledge into generative systems to simulate real-world dynamic scenarios. Considering the lack of a systematic overview in this field, this survey aims to provide a comprehensive summary of architecture designs and their applications to fill this gap. Specifically, we discuss and organize the evolutionary process of physical cognition in video generation from a cognitive science perspective, while proposing a three-tier taxonomy: 1) basic schema perception for generation, 2) passive cognition of physical knowledge for generation, and 3) active cognition for world simulation, encompassing state-of-the-art methods, classical paradigms, and benchmarks. Subsequently, we emphasize the inherent key challenges in this domain and delineate potential pathways for future research, contributing to advancing the frontiers of discussion in both academia and industry. Through structured review and interdisciplinary analysis, this survey aims to provide directional guidance for developing interpretable, controllable, and physically consistent video generation paradigms, thereby propelling generative models from the stage of ''visual mimicry'' towards a new phase of ''human-like physical comprehension''.

While instruction-based image editing, enabled by multi-modal generative models, has advanced significantly, existing benchmarks lack a comprehensive evaluation of physics-based reasoning, a critical capability for handling real-world scenarios. To address this, we introduce PhyEditBench, a benchmark designed to assess the physical understanding of editing models. Guided by a hierarchical taxonomy, we establish 4 primary classes and 12 subclasses. It comprises 238 high-quality, high-resolution, real-world instances meticulously extracted from videos to capture authentic physical dynamics, alongside 35 synthetic Anti-Physics instances. Our empirical analysis of current SOTA editing methods exposes substantial limitations in their physics-based reasoning. We further propose a training-free baseline named PhyWorld that uses test-time scaling and a latent reduction strategy. PhyWorld outperforms comparable models and suggests that the video generation process can effectively serve as a reasoning mechanism for image editing. The project page is available at https://github.com/Previsior/PhyEditBench.

The scalability of humanoid robots will depend not only on models and hardware, but also on whether physical experience can accumulate across robots, tasks, organizations, and time. Drawing on the authors' work in developing ISO/WD 26264-1, Humanoid robot datasets -- Part 1: General requirements, within ISO/TC 299/WG 16, this article argues that data standards are becoming foundational infrastructure for Physical AI. We develop three insights. First, humanoid robot data is embodied interaction data, not a collection of isolated digital samples; a useful dataset must preserve the relationship among robot body, action, task, scene, execution trace, and outcome. Second, its value depends on physical coherence: multimodal streams are reusable only when timing, coordinate frames, calibration, kinematics, units, and synchronization assumptions remain inspectable. Third, the main bottleneck is not only data scarcity, but non-cumulative data caused by high collection costs, data silos, and inconsistent evaluation. We argue that humanoid robot data standards address these bottlenecks by making embodied experience interpretable, shareable, traceable, and reusable. A general standard should provide horizontal infrastructure for lifecycle management, metadata, provenance, quality, versioning, and traceability, while capability-specific parts should define domain grammar for manipulation, locomotion, human-robot interaction, cognition, and future humanoid capabilities. As AI moves from screens into bodies, data standards must evolve from organizing digital information to structuring physical interaction.

Transforming static images into interactive experiences remains a challenging task in computer vision. Tackling this challenge holds the potential to elevate mobile user experiences, notably through interactive and AR/VR applications. Current approaches aim to achieve this either using pre-recorded video responses or requiring multi-view images as input. In this paper, we present PhysID, that streamlines the creation of physics-based interactive dynamics from a single-view image by leveraging large generative models for 3D mesh generation and physical property prediction. This significantly reduces the expertise required for engineering-intensive tasks like 3D modeling and intrinsic property calibration, enabling the process to be scaled with minimal manual intervention. We integrate an on-device physics-based engine for physically plausible real-time rendering with user interactions. PhysID represents a leap forward in mobile-based interactive dynamics, offering real-time, non-deterministic interactions and user-personalization with efficient on-device memory consumption. Experiments evaluate the zero-shot capabilities of various Multimodal Large Language Models (MLLMs) on diverse tasks and the performance of 3D reconstruction models. These results demonstrate the cohesive functioning of all modules within the end-to-end framework, contributing to its effectiveness.

Current Cyber-Physical Systems (CPS) integrated with Digital Twin (DT) technology face critical limitations in achieving real-time performance for mission-critical industrial applications. Existing 5G-enabled systems suffer from latencies exceeding 10ms, which are inadequate for applications requiring sub-millisecond response times, such as autonomous industrial control and predictive maintenance. This research aims to develop and validate a 6G-enabled Digital Twin framework that achieves ultra-low latency communication and real-time synchronization between physical industrial assets and their digital counterparts, specifically targeting bearing fault detection as a critical industrial use case. The proposed framework integrates terahertz communications (0.1-1 THz), intelligent reflecting surfaces, and edge artificial intelligence within a five-layer architecture. Experimental validation was conducted using the Case Western Reserve University (CWRU) bearing dataset, implementing comprehensive feature extraction (15 time and frequency domain features) and Random Forest classification algorithms. The system performance was evaluated against traditional WiFi-6 and 5G networks across multiple metrics, including classification accuracy, end-to-end latency, and scalability. It achieved 97.7% fault classification accuracy with 0.8ms end-to-end latency, representing a 15.6x improvement over WiFi-6 (12.5ms) and 5.25x improvement over 5G (4.2ms) networks. The system demonstrated superior scalability with sub-linear processing time growth and maintained consistent performance across four bearing fault categories (normal, inner race, outer race, and ball faults) with macro-averaged F1-scores exceeding 97%.

Tensor computations, with matrix multiplication being the primary operation, serve as the fundamental basis for data analysis, physics, machine learning, and deep learning. As the scale and complexity of data continue to grow rapidly, the demand for tensor computations has also increased significantly. To meet this demand, several research institutions have started developing dedicated hardware for tensor computations. To further improve the computational performance of tensor process units, we have reexamined the issue of computation reuse that was previously overlooked in existing architectures. As a result, we propose a novel EN-T architecture that can reduce chip area and power consumption. Furthermore, our method is compatible with existing tensor processing units. We evaluated our method on prevalent microarchitectures, the results demonstrate an average improvement in area efficiency of 8.7\%, 12.2\%, and 11.0\% for tensor computing units at computational scales of 256 GOPS, 1 TOPS, and 4 TOPS, respectively. Similarly, there were energy efficiency enhancements of 13.0\%, 17.5\%, and 15.5\%.

Safety verification in Computer Numerical Control (CNC) machining has traditionally relied on simulation-based methods that require repetitive tests when requirements change. This paper introduces a formal verification framework that conceptualizes the physical CNC workspace as a Spatial Heap, treating physical occupancy as a managed logical resource. Central to our approach is a Parser-Prover Handshake that decouples machine kinematics from formal logic. By mapping tool trajectories and safety buffers into a discrete spatial model prior to evaluation, the framework enables the use of Separation Logic (SL) to verify safety via formal triples. Within this model, physical collisions are redefined as logical Spatial Data Races, detected through the failure of the separating conjunction to establish disjointness. Furthermore, we extend the methodology to collaborative environments using Concurrent Separation Logic (CSL), where physical hand-offs are verified as formal ownership transfers. Additionally, the framework scales to multi-axis kinematics (e.g., 5-axis Table-Table configurations) by treating the workpiece as a dynamically mutable spatial resource. By serving as a complement to traditional geometric simulation, this approach reduces the number of required iterative test cycles, offering a foundation for autonomous, less-collision manufacturing.

Text-to-video (T2V) models like Sora have made significant strides in visualizing complex prompts, which is increasingly viewed as a promising path towards constructing the universal world simulator. Cognitive psychologists believe that the foundation for achieving this goal is the ability to understand intuitive physics. However, the capacity of these models to accurately represent intuitive physics remains largely unexplored. To bridge this gap, we introduce PhyGenBench, a comprehensive Physics Generation Benchmark designed to evaluate physical commonsense correctness in T2V generation. PhyGenBench comprises 160 carefully crafted prompts across 27 distinct physical laws, spanning four fundamental domains, which could comprehensively assesses models' understanding of physical commonsense. Alongside PhyGenBench, we propose a novel evaluation framework called PhyGenEval. This framework employs a hierarchical evaluation structure utilizing appropriate advanced vision-language models and large language models to assess physical commonsense. Through PhyGenBench and PhyGenEval, we can conduct large-scale automated assessments of T2V models' understanding of physical commonsense, which align closely with human feedback. Our evaluation results and in-depth analysis demonstrate that current models struggle to generate videos that comply with physical commonsense. Moreover, simply scaling up models or employing prompt engineering techniques is insufficient to fully address the challenges presented by PhyGenBench (e.g., dynamic scenarios). We hope this study will inspire the community to prioritize the learning of physical commonsense in these models beyond entertainment applications. We will release the data and codes at https://github.com/OpenGVLab/PhyGenBench

Generative Artificial Intelligence (AI) has rapidly advanced the field of computer vision by enabling machines to create and interpret visual data with unprecedented sophistication. This transformation builds upon a foundation of generative models to produce realistic images, videos, and 3D/4D content. Conventional generative models primarily focus on visual fidelity while often neglecting the physical plausibility of the generated content. This gap limits their effectiveness in applications that require adherence to real-world physical laws, such as robotics, autonomous systems, and scientific simulations. As generative models evolve to increasingly integrate physical realism and dynamic simulation, their potential to function as "world simulators" expands. Therefore, the field of physics-aware generation in computer vision is rapidly growing, calling for a comprehensive survey to provide a structured analysis of current efforts. To serve this purpose, the survey presents a systematic review, categorizing methods based on how they incorporate physical knowledge, either through explicit simulation or implicit learning. It also analyzes key paradigms, discusses evaluation protocols, and identifies future research directions. By offering a comprehensive overview, this survey aims to help future developments in physically grounded generation for computer vision. The reviewed papers are summarized at https://tinyurl.com/Physics-Aware-Generation.

While large language models (LLMs) promise to revolutionize automated scientific discovery, their application in rigorous real-world physical research is stalled by two critical barriers: a lack of realistic evaluation benchmarks and systemic LLM hallucinations. Here, we address both problems. We introduce QMP-Bench, a pioneering end-to-end research-level benchmark in quantum many-body simulation consisting of 100 tasks extracted from 21 high-impact prestigious journals, presenting a challenge even for current frontier LLMs. To establish a paradigm for reliable and transparent AI physicists, we present PhysVEC, a multi-agent framework that enforces self-verifiable and error correction in AI research. PhysVEC seamlessly integrates programming and scientific verifiers to guarantee coding correctness and principle-based physical validity, yielding interpretable evidence and error correction at each step. PhysVEC significantly outperforms existing LLM baselines on various scenarios in QMP-Bench and presents a favorable inference-time scaling, successfully transforming unreliable AI generations into accurate physical reproductions, paving a robust and trustworthy path towards future automated scientific discovery.

LLM-based LEGO assembly generation requires both semantic grounding and physical feasibility. We identify a data-induced failure mode, PhysHack, in which the assemblies satisfy physical-validity constraints while producing structures that are geometrically misaligned, semantically inconsistent, or poorly calibrated. To address this challenge, we propose a model-based data selection approach that uses only a small fraction of the training data while improving physically grounded LEGO assembly generation. Building on the selected trajectories, we introduce PVPO, a sample-efficient reinforcement learning method that couples physical feasibility with voxel-space geometric rewards. Our results show that physical validity alone is an insufficient proxy for reliable physical reasoning: models can learn to generate valid structures without preserving semantic or geometric fidelity. Experiments across model backbones and test-time scaling settings demonstrate that PVPO improves structural and semantic alignment, physical validity, structural stability, and calibration, while reducing reliance on extensive post-hoc rejection sampling. In particular, results on calibration show that PVPO mitigates PhysHack by making test-time selection more predictive of semantic and structural quality.

Deep research agents are Large Language Model (LLM)-based systems designed for autonomous, multi-step scientific reasoning, and they hold immense potential for accelerating research in the physical sciences. However, comprehensive and in-depth evaluations of their capabilities within this domain remain lacking. To address this gap, we introduce PhySciBench, a benchmark highly relevant to physical science research, comprising 200 expert-curated questions, balanced between physics and chemistry, across six task categories that reflect real-world scientific workflows. Evaluations of state-of-the-art models and agent systems on PhySciBench reveal limited performance; even the strongest baseline, Gemini Deep Research, achieves an accuracy of only 33.5%. Analysis of failure cases identifies three recurrent deficiencies: fragility in extended reasoning chains, limited knowledge transfer across steps, and a lack of physics-grounded self-verification. Motivated by these findings, we develop DelveAgent, a modular multi-agent framework equipped with an adaptive planning loop, dual-granularity memory, and a hierarchical physics-grounded reflection mechanism. Across four scientific benchmarks, DelveAgent improves accuracy by up to 7.5 percentage points while reducing inference costs to approximately one-third of the strongest baseline. These results establish the significance of PhySciBench as a critical benchmark for evaluating AI systems in the physical sciences and demonstrate that architectural specialization can effectively enhance the reliability of autonomous scientific research.

Existing benchmarks fail to capture a crucial aspect of intelligence: physical reasoning, the integrated ability to combine domain knowledge, symbolic reasoning, and understanding of real-world constraints. To address this gap, we introduce PhyX: the first large-scale benchmark designed to assess models capacity for physics-grounded reasoning in visual scenarios. PhyX includes 3K meticulously curated multimodal questions spanning 6 reasoning types across 25 sub-domains and 6 core physics domains: thermodynamics, electromagnetism, mechanics, modern physics, optics, and wave\&acoustics. In our comprehensive evaluation, even state-of-the-art models struggle significantly with physical reasoning. GPT-4o, Claude3.7-Sonnet, and GPT-o4-mini achieve only 32.5\%, 42.2\%, and 45.8\% accuracy respectively-performance gaps exceeding 29\% compared to human experts. Our analysis exposes critical limitations in current models: over-reliance on memorized disciplinary knowledge, excessive dependence on mathematical formulations, and surface-level visual pattern matching rather than genuine physical understanding. We provide in-depth analysis through fine-grained statistics, detailed case studies, and multiple evaluation paradigms to thoroughly examine physical reasoning capabilities. To ensure reproducibility, we implement a compatible evaluation protocol based on widely-used toolkits such as VLMEvalKit, enabling one-click evaluation.

The most technologically consequential materials are often the rarest: they occupy narrow regions of chemical space, obey competing physical constraints, and appear only sparsely in existing databases. High-kappa dielectrics, high-Tc superconductors, and ferromagnetic insulators are to name a few. This scarcity fundamentally limits today's data-driven materials discovery, where machine-learning models excel at interpolation but struggle to generate genuinely new candidates. Here, we introduce DielecMIND, an artificial intelligence framework that reframes materials discovery as a reasoning-driven exploration instead of a database-screening problem. Using high-kappa dielectrics as a data-scarce and technologically stringent test case, DielecMIND combines large-language-model hypothesis generation for the first time with physics validated first-principles calculation to navigate chemical space beyond known compounds. Prior to our work, only 14 experimentally or computationally validated materials with kappa > 150 were known. Our framework discovers and validates 5 new such compounds, expanding this rare-materials class by a remarkable = 35% in a single study. Among them, we find that Ba2TiHfO6 exhibits a dielectric constant of 637, minimal loss at low optical frequencies, and stability up to 800 K. Beyond dielectrics, this work demonstrates a new paradigm for artificial-intelligence-guided discovery: one that generates a small number of physically grounded, experimentally plausible candidates yet measurably expands sparsely populated functional materials spaces. Thus, DielecMIND points toward a general strategy for discovering rare, high-impact functional materials where data scarcity has long constrained progress.

Printed Electronics (PE) feature distinct and remarkable characteristics that make them a prominent technology for achieving true ubiquitous computing. This is particularly relevant in application domains that require conformal and ultra-low cost solutions, which have experienced limited penetration of computing until now. Unlike silicon-based technologies, PE offer unparalleled features such as non-recurring engineering costs, ultra-low manufacturing cost, and on-demand fabrication of conformal, flexible, non-toxic, and stretchable hardware. However, PE face certain limitations due to their large feature sizes, that impede the realization of complex circuits, such as machine learning classifiers. In this work, we address these limitations by leveraging the principles of Approximate Computing and Bespoke (fully-customized) design. We propose an automated framework for designing ultra-low power Multilayer Perceptron (MLP) classifiers which employs, for the first time, a holistic approach to approximate all functions of the MLP's neurons: multiplication, accumulation, and activation. Through comprehensive evaluation across various MLPs of varying size, our framework demonstrates the ability to enable battery-powered operation of even the most intricate MLP architecture examined, significantly surpassing the current state of the art.

Recent rapid advancements in text-to-video (T2V) generation, such as SoRA and Kling, have shown great potential for building world simulators. However, current T2V models struggle to grasp abstract physical principles and generate videos that adhere to physical laws. This challenge arises primarily from a lack of clear guidance on physical information due to a significant gap between abstract physical principles and generation models. To this end, we introduce the World Simulator Assistant (WISA), an effective framework for decomposing and incorporating physical principles into T2V models. Specifically, WISA decomposes physical principles into textual physical descriptions, qualitative physical categories, and quantitative physical properties. To effectively embed these physical attributes into the generation process, WISA incorporates several key designs, including Mixture-of-Physical-Experts Attention (MoPA) and a Physical Classifier, enhancing the model's physics awareness. Furthermore, most existing datasets feature videos where physical phenomena are either weakly represented or entangled with multiple co-occurring processes, limiting their suitability as dedicated resources for learning explicit physical principles. We propose a novel video dataset, WISA-32K, collected based on qualitative physical categories. It consists of 32,000 videos, representing 17 physical laws across three domains of physics: dynamics, thermodynamics, and optics. Experimental results demonstrate that WISA can effectively enhance the compatibility of T2V models with real-world physical laws, achieving a considerable improvement on the VideoPhy benchmark. The visual exhibitions of WISA and WISA-32K are available in the https://360cvgroup.github.io/WISA/.

As neural computation is revolutionizing the field of Artificial Intelligence (AI), rethinking the ideal neural hardware is becoming the next frontier. Fast and reliable von Neumann architecture has been the hosting platform for neural computation. Although capable, its separation of memory and computation creates the bottleneck for the energy efficiency of neural computation, contrasting the biological brain. The question remains: how can we efficiently combine memory and computation, while exploiting the physics of the substrate, to build intelligent systems? In this thesis, I explore an alternative way with memristive devices for neural computation, where the unique physical dynamics of the devices are used for inference, learning and routing. Guided by the principles of gradient-based learning, we selected functions that need to be materialized, and analyzed connectomics principles for efficient wiring. Despite non-idealities and noise inherent in analog physics, I will provide hardware evidence of adaptability of local learning to memristive substrates, new material stacks and circuit blocks that aid in solving the credit assignment problem and efficient routing between analog crossbars for scalable architectures.

Predictive Physical AI systems output state rollouts, action chunks, and latent plans, yet a low root-mean-square error (RMSE) does not imply that a particular proposal is physically executable. We formulate physical admissibility as a prediction-control interface: before execution, a decoded proposal is treated as candidate dynamics and evaluated using kinematic, dynamic, and direct-to-composed horizon conditions. Passing is not a certificate of task success; rejection identifies violation of the specified physical envelope and gives a component-level reason. On Hugging Face LeRobot PushT, controlled falsification shows that one-step prediction-RMSE and standardized dynamics residuals reach area under the receiver operating characteristic curve (AUC) 0.982 and 0.972, kinematic-only conditions reach AUC 0.592, and the full gate reaches AUC 0.957 with condition-level attribution. In replay-based intervention experiments, residual-based filters and the full physical-admissibility gate prevent 87-$89% of invalid proposals while preserving mean progress near 0.998.

Physical AI systems need to perceive, understand, and perform complex actions in the physical world. In this paper, we present the Cosmos-Reason1 models that can understand the physical world and generate appropriate embodied decisions (e.g., next step action) in natural language through long chain-of-thought reasoning processes. We begin by defining key capabilities for Physical AI reasoning, with a focus on physical common sense and embodied reasoning. To represent physical common sense, we use a hierarchical ontology that captures fundamental knowledge about space, time, and physics. For embodied reasoning, we rely on a two-dimensional ontology that generalizes across different physical embodiments. Building on these capabilities, we develop two multimodal large language models, Cosmos-Reason1-8B and Cosmos-Reason1-56B. We curate data and train our models in four stages: vision pre-training, general supervised fine-tuning (SFT), Physical AI SFT, and Physical AI reinforcement learning (RL) as the post-training. To evaluate our models, we build comprehensive benchmarks for physical common sense and embodied reasoning according to our ontologies. Evaluation results show that Physical AI SFT and reinforcement learning bring significant improvements. To facilitate the development of Physical AI, we will make our code and pre-trained models available under the NVIDIA Open Model License at https://github.com/nvidia-cosmos/cosmos-reason1.

This work is dedicated to the review and perspective of the new direction that we call "Neuropunk revolution" resembling the cultural phenomenon of cyberpunk. This new phenomenon has its foundations in advances in neuromorphic technologies including memristive and bio-plausible simulations, BCI, and neurointerfaces as well as unconventional approaches to AI and computing in general. We present the review of the current state-of-the-art and our vision of near future development of scientific approaches and future technologies. We call the "Neuropunk revolution" the set of trends that in our view provide the necessary background for the new generation of approaches technologies to integrate the cybernetic objects with biological tissues in close loop system as well as robotic systems inspired by the biological processes again integrated with biological objects. We see bio-plausible simulations implemented by digital computers or spiking networks memristive hardware as promising bridge or middleware between digital and (neuro)biological domains.

Vision-language-action (VLA) and world-action (WAM) models map observations and instructions directly to robot actions. This directness ties a policy to training: minor layout or viewpoint changes cause failure, and instructions generalize poorly. The root cause lies in representation: task requirements, conditions, progress, and failure recovery are implicitly encoded in action sequences, making them difficult to inspect or revise. Digital coding agents offer a precedent: LLMs call tools, verify results, and revise from feedback as executable code. The same working pattern of explicit state, manageable execution, and revisable procedures underlies generalization and long-horizon execution in the physical world, letting physical experience return as reusable programs, memory, or evidence. We propose Physical Coding, representing task state and execution as code. Code as World records objects, relations, constraints, and progress; Code as Policy organizes planning, verification, recovery, and execution. We build HexaAnything, which calls perception, planning, and control tools, including VLA/WAM policies, and makes in-the-loop decisions from external feedback. Verified traces become data and memory, enabling evolution from tools and Harness to model weights, architectures, and ultimately hardware and task design. On RoboCasa365, HexaAnything improves Composite-Unseen and overall success over XR-1 VLA, and its Harness-trained HexaModel beats the base on every split, indicating code traces internalize physical execution. On PhyBench and a dual-arm AgileX robot, the agent autonomously completes physics experiments and most tabletop tasks, often faster than published results. We observe data, model, and tool self-evolution; future work targets weight internalization, autonomous redesign of architectures, languages, representations, and tasks, and deployment in manufacturing and science.

We introduce PhysicalAgent, an agentic framework for robotic manipulation that integrates iterative reasoning, diffusion-based video generation, and closed-loop execution. Given a textual instruction, our method generates short video demonstrations of candidate trajectories, executes them on the robot, and iteratively re-plans in response to failures. This approach enables robust recovery from execution errors. We evaluate PhysicalAgent across multiple perceptual modalities (egocentric, third-person, and simulated) and robotic embodiments (bimanual UR3, Unitree G1 humanoid, simulated GR1), comparing against state-of-the-art task-specific baselines. Experiments demonstrate that our method consistently outperforms prior approaches, achieving up to 83% success on human-familiar tasks. Physical trials reveal that first-attempt success is limited (20-30%), yet iterative correction increases overall success to 80% across platforms. These results highlight the potential of video-based generative reasoning for general-purpose robotic manipulation and underscore the importance of iterative execution for recovering from initial failures. Our framework paves the way for scalable, adaptable, and robust robot control.

Large language models demonstrate remarkable capabilities across various domains, especially mathematics and logic reasoning. However, current evaluations overlook physics-based reasoning - a complex task requiring physics theorems and constraints. We present PhysReason, a 1,200-problem benchmark comprising knowledge-based (25%) and reasoning-based (75%) problems, where the latter are divided into three difficulty levels (easy, medium, hard). Notably, problems require an average of 8.1 solution steps, with hard requiring 15.6, reflecting the complexity of physics-based reasoning. We propose the Physics Solution Auto Scoring Framework, incorporating efficient answer-level and comprehensive step-level evaluations. Top-performing models like Deepseek-R1, Gemini-2.0-Flash-Thinking, and o3-mini-high achieve less than 60% on answer-level evaluation, with performance dropping from knowledge questions (75.11%) to hard problems (31.95%). Through step-level evaluation, we identified four key bottlenecks: Physics Theorem Application, Physics Process Understanding, Calculation, and Physics Condition Analysis. These findings position PhysReason as a novel and comprehensive benchmark for evaluating physics-based reasoning capabilities in large language models. Our code and data will be published at https:/dxzxy12138.github.io/PhysReason.

Joint audio-video generation models are rapidly approaching professional production quality, raising a central question: do they understand audio-visual physics, or merely generate plausible sounds and frames that violate real-world consistency? We introduce AV-Phys Bench, a benchmark for evaluating physical commonsense in joint audio-video generation. AV-Phys Bench tests models across three scene categories: Steady State, Event Transition, and Environment Transition. It covers physics-grounded subcategories drawn from real-world scenes, plus Anti-AV-Physics prompts that deliberately request physically inconsistent audio-video behavior. Each generation is evaluated along five dimensions: visual semantic adherence, audio semantic adherence, visual physical commonsense, audio physical commonsense, and cross-modal physical commonsense. Across three proprietary and four open-source models, we find that Seedance 2.0 performs best overall, but all models remain far from robust physical understanding. Performance drops sharply on event-driven and environment-driven transitions, and even strong proprietary systems collapse on Anti-AV-Physics prompts. We further introduce AV-Phys Agent, a ReAct-style evaluator that combines a multimodal language model with deterministic acoustic measurement tools, producing rankings that closely align with human ratings. Our results identify cross-modal physical consistency and transition-driven scene dynamics as key open challenges for joint audio-video generation.

3D modeling is moving from virtual to physical. Existing 3D generation primarily emphasizes geometries and textures while neglecting physical-grounded modeling. Consequently, despite the rapid development of 3D generative models, the synthesized 3D assets often overlook rich and important physical properties, hampering their real-world application in physical domains like simulation and embodied AI. As an initial attempt to address this challenge, we propose PhysX, an end-to-end paradigm for physical-grounded 3D asset generation. 1) To bridge the critical gap in physics-annotated 3D datasets, we present PhysXNet - the first physics-grounded 3D dataset systematically annotated across five foundational dimensions: absolute scale, material, affordance, kinematics, and function description. In particular, we devise a scalable human-in-the-loop annotation pipeline based on vision-language models, which enables efficient creation of physics-first assets from raw 3D assets.2) Furthermore, we propose PhysXGen, a feed-forward framework for physics-grounded image-to-3D asset generation, injecting physical knowledge into the pre-trained 3D structural space. Specifically, PhysXGen employs a dual-branch architecture to explicitly model the latent correlations between 3D structures and physical properties, thereby producing 3D assets with plausible physical predictions while preserving the native geometry quality. Extensive experiments validate the superior performance and promising generalization capability of our framework. All the code, data, and models will be released to facilitate future research in generative physical AI.

World simulators can provide safe and scalable environments for training Physical AI systems before real-world deployment. Large video generation models are emerging as a promising basis for such simulators because they can generate diverse and realistic visual futures. However, using them as world simulators requires physically faithful video continuations, namely, generated videos that preserve the physical state implied by the conditioning input, and evolve in ways consistent with basic physical principles. We propose PhyWorld, a video generation world model designed to produce temporally coherent and physically faithful scene continuations through two-stage post-training. In the first stage, we improve video-to-video continuation with flow matching fine-tuning, encouraging stable visual attributes and coherent motion dynamics across frames. In the second stage, we align generated dynamics with physical principles using Direct Preference Optimization (DPO) over physics preference pairs, guiding the model toward outputs with higher physical plausibility. To evaluate PhyWorld, we use both standard video-quality benchmarks and a dedicated physical-faithfulness benchmark with per-law scoring. Experiments show that PhyWorld improves video consistency, achieving an average score of 0.769 on VBench compared with 0.756 or below for state-of-the-art baselines. PhyWorld also improves physical plausibility, reaching an average score of 3.09 on our physical-faithfulness benchmark compared with 2.99 for the strongest baseline. These results suggest that post-training large video generation models with continuation and physics-preference signals can make them more effective world simulators for Physical AI.

In order for AI to be safely deployed in real-world scenarios such as hospitals, schools, and the workplace, it must be able to robustly reason about the physical world. Fundamental to this reasoning is physical common sense: understanding the physical properties and affordances of available objects, how they can be manipulated, and how they interact with other objects. Physical commonsense reasoning is fundamentally a multi-sensory task, since physical properties are manifested through multiple modalities - two of them being vision and acoustics. Our paper takes a step towards real-world physical commonsense reasoning by contributing PACS: the first audiovisual benchmark annotated for physical commonsense attributes. PACS contains 13,400 question-answer pairs, involving 1,377 unique physical commonsense questions and 1,526 videos. Our dataset provides new opportunities to advance the research field of physical reasoning by bringing audio as a core component of this multimodal problem. Using PACS, we evaluate multiple state-of-the-art models on our new challenging task. While some models show promising results (70% accuracy), they all fall short of human performance (95% accuracy). We conclude the paper by demonstrating the importance of multimodal reasoning and providing possible avenues for future research.

Reviewing the progress in artificial intelligence over the past decade, various significant advances (e.g. object detection, image generation, large language models) have enabled AI systems to produce more semantically meaningful outputs and achieve widespread adoption in internet scenarios. Nevertheless, AI systems still struggle when it comes to understanding and interacting with the physical world. This reveals an important issue: relying solely on semantic-level concepts learned from internet data (e.g. texts, images) to understand the physical world is far from sufficient -- machine intelligence currently lacks an effective way to learn about the physical world. This research introduces the idea of analytic concept -- representing the concepts related to the physical world through programs of mathematical procedures, providing machine intelligence a portal to perceive, reason about, and interact with the physical world. Except for detailing the design philosophy and providing guidelines for the application of analytic concepts, this research also introduce about the infrastructure that has been built around analytic concepts. I aim for my research to contribute to addressing these questions: What is a proper abstraction of general concepts in the physical world for machine intelligence? How to systematically integrate structured priors with neural networks to constrain AI systems to comply with physical laws?

The image-to-image translation abilities of generative learning models have recently made significant progress in the estimation of complex (steered) mappings between image distributions. While appearance based tasks like image in-painting or style transfer have been studied at length, we propose to investigate the potential of generative models in the context of physical simulations. Providing a dataset of 300k image-pairs and baseline evaluations for three different physical simulation tasks, we propose a benchmark to investigate the following research questions: i) are generative models able to learn complex physical relations from input-output image pairs? ii) what speedups can be achieved by replacing differential equation based simulations? While baseline evaluations of different current models show the potential for high speedups (ii), these results also show strong limitations toward the physical correctness (i). This underlines the need for new methods to enforce physical correctness. Data, baseline models and evaluation code http://www.physics-gen.org.

Physical intelligence holds immense promise for advancing embodied intelligence, enabling robots to acquire complex behaviors from demonstrations. However, achieving generalization and transfer across diverse robotic platforms and environments requires careful design of model architectures, training strategies, and data diversity. Meanwhile existing systems often struggle with scalability, adaptability to heterogeneous hardware, and objective evaluation in real-world settings. We present a generalized end-to-end robotic learning framework designed to bridge this gap. Our framework introduces a unified architecture that supports cross-platform adaptability, enabling seamless deployment across industrial-grade robots, collaborative arms, and novel embodiments without task-specific modifications. By integrating multi-task learning with streamlined network designs, it achieves more robust performance than conventional approaches, while maintaining compatibility with varying sensor configurations and action spaces. We validate our framework through extensive experiments on seven manipulation tasks. Notably, Diffusion-based models trained in our framework demonstrated superior performance and generalizability compared to the LeRobot framework, achieving performance improvements across diverse robotic platforms and environmental conditions.

Video editing has advanced substantially in recent years, with methods increasingly accounting for the visual consequences of edits, such as changes to shadows and occlusions. However, the physical consequences of edits, including changes to subsequent motion and interactions, remain less explored. We formulate this problem as physical counterfactual video editing (PCVE), which aims to generate a counterfactual video depicting the resulting motion and interactions given a source video, a physical edit, and its execution frame. PCVE is challenging because it requires understanding scene physics and inferring the downstream motion and interactions induced by a physical intervention, while paired factual and counterfactual data and dedicated evaluation metrics are lacking. We introduce VideoPhysEdit, a new training-free pipeline for PCVE in rigid-body scenes. It makes physical reasoning explicit through a novel physical scene reconstruction method that recovers a scene reproducing the observed motion and interactions under simulation, enabling the pipeline to apply physical edits as interventions and use the resulting trajectories to guide counterfactual video generation. We further construct PCVE-RigidBench, a synthetic benchmark with paired source and counterfactual target videos and physical ground truth, and introduce the Physical Edit Score. VideoPhysEdit achieves substantially higher physical edit accuracy than open-source methods and commercial models while maintaining competitive visual fidelity. Its Physical Edit Score is 0.376, the only positive score among the compared methods. Qualitative comparisons on real videos further show that VideoPhysEdit applies to real-world scenes and better depicts the downstream motion and interactions induced by the edits than the compared methods. Code: https://github.com/Hammour-steak/VideoPhysEdit

The proliferation of probabilistic AI has promoted proposals for specialized stochastic computers. Despite promising efficiency gains, these proposals have failed to gain traction because they rely on fundamentally limited modeling techniques and exotic, unscalable hardware. In this work, we address these shortcomings by proposing an all-transistor probabilistic computer that implements powerful denoising models at the hardware level. A system-level analysis indicates that devices based on our architecture could achieve performance parity with GPUs on a simple image benchmark using approximately 10,000 times less energy.

Physical AI Smart Spaces is, to the best of our knowledge, the first benchmark to simultaneously provide large-scale, multi-class, and multi-camera 3D perception data for indoor smart spaces. It contains over 280 hours of synchronized 1080p footage captured by nearly 1,800 cameras in warehouses, hospitals, retail venues, and similar settings, together with automatic annotations for multi-camera identities, 2D bounding boxes, 3D bounding boxes, camera calibration, and depth where available. The benchmark spans Isaac Sim synthetic generation, Cosmos Transfer appearance augmentation, and real-world Sim2Real evaluation. For the real-world target, we include two warehouse deployments with time-synchronized streams, automatic VGGT-based calibration, and a 3D labeling interface that projects world-frame 3D boxes into each view for cross-camera verification. We describe the dataset scope, annotation and calibration schema, generation workflow, benchmark protocols, and official evaluation system, which standardizes submission format, and leaderboard reporting. A central contribution is a 3D instantiation of Higher Order Tracking Accuracy (HOTA), extending the usual 2D box-based tracking evaluation to 3D locations and 3D boxes. We further report empirical baselines from the AI City Challenge leaderboards, showing how methods evolve from person-only 3D location tracking to multi-class 3D box tracking under realistic smart-space constraints. The release is available at https://huggingface.co/datasets/nvidia/PhysicalAI-SmartSpaces.

This article conducts a literature review of current and future challenges in the use of artificial intelligence (AI) in cyber physical systems. The literature review is focused on identifying a conceptual framework for increasing resilience with AI through automation supporting both, a technical and human level. The methodology applied resembled a literature review and taxonomic analysis of complex internet of things (IoT) interconnected and coupled cyber physical systems. There is an increased attention on propositions on models, infrastructures and frameworks of IoT in both academic and technical papers. These reports and publications frequently represent a juxtaposition of other related systems and technologies (e.g. Industrial Internet of Things, Cyber Physical Systems, Industry 4.0 etc.). We review academic and industry papers published between 2010 and 2020. The results determine a new hierarchical cascading conceptual framework for analysing the evolution of AI decision-making in cyber physical systems. We argue that such evolution is inevitable and autonomous because of the increased integration of connected devices (IoT) in cyber physical systems. To support this argument, taxonomic methodology is adapted and applied for transparency and justifications of concepts selection decisions through building summary maps that are applied for designing the hierarchical cascading conceptual framework.

Physical principles are fundamental to realistic visual simulation, but remain a significant oversight in transformer-based video generation. This gap highlights a critical limitation in rendering rigid body motion, a core tenet of classical mechanics. While computer graphics and physics-based simulators can easily model such collisions using Newton formulas, modern pretrain-finetune paradigms discard the concept of object rigidity during pixel-level global denoising. Even perfectly correct mathematical constraints are treated as suboptimal solutions (i.e., conditions) during model optimization in post-training, fundamentally limiting the physical realism of generated videos. Motivated by these considerations, we introduce, for the first time, a physics-aware reinforcement learning paradigm for video generation models that enforces physical collision rules directly in high-dimensional spaces, ensuring the physics knowledge is strictly applied rather than treated as conditions. Subsequently, we extend this paradigm to a unified framework, termed Mimicry-Discovery Cycle (MDcycle), which allows substantial fine-tuning while fully preserving the model's ability to leverage physics-grounded feedback. To validate our approach, we construct new benchmark PhysRVGBench and perform extensive qualitative and quantitative experiments to thoroughly assess its effectiveness.

Transformers are ubiquitous in Natural Language Processing (NLP) tasks, but they are difficult to be deployed on hardware due to the intensive computation. To enable low-latency inference on resource-constrained hardware platforms, we propose to design Hardware-Aware Transformers (HAT) with neural architecture search. We first construct a large design space with arbitrary encoder-decoder attention and heterogeneous layers. Then we train a SuperTransformer that covers all candidates in the design space, and efficiently produces many SubTransformers with weight sharing. Finally, we perform an evolutionary search with a hardware latency constraint to find a specialized SubTransformer dedicated to run fast on the target hardware. Extensive experiments on four machine translation tasks demonstrate that HAT can discover efficient models for different hardware (CPU, GPU, IoT device). When running WMT'14 translation task on Raspberry Pi-4, HAT can achieve 3times speedup, 3.7times smaller size over baseline Transformer; 2.7times speedup, 3.6times smaller size over Evolved Transformer with 12,041times less search cost and no performance loss. HAT code is https://github.com/mit-han-lab/hardware-aware-transformers.git

Text-to-image generation has reached photorealistic quality, yet state-of-the-art systems remain unreliable at producing scientific diagrams, whose value depends not on appearance but on physical faithfulness: correct force directions, valid coordinate systems, consistent thermodynamic states, and equations matching the depicted scenario. Trained on web imagery with physically shallow captions, generic models produce diagrams that look plausible but are physically wrong, harmful in education and scientific communication. We present Princigram, a physics-faithful scientific-diagram generator, and its data pipeline. Our central advance is Structured Physical Chain-of-Thought (SP-CoT): a per-subdiscipline schema that decomposes a physics diagram into an explicit multi-step reasoning chain across six subdisciplines, from scene identification through force or process analysis to governing laws and synthesis. Unlike free-form chain-of-thought, SP-CoT follows a fixed schema with strict fidelity rules that separate visually grounded facts from physically inferred reasoning and type all mathematics symbolically; it serves both as dense training supervision and, at inference, as a structured "thinking" prompt. With it we curate and structurally annotate 4.3 million physics images, of which 115,037 carry expert-level annotation, and adapt a unified multimodal backbone. We further introduce VeriphyT2IBench, whose questions are derived from each held-out diagram's own structured annotation: each diagram becomes an item-specific bank of binary questions about its objects, forces, and states, so a judge model's score decomposes into named physical facts rather than one holistic number. On the physics subset of GenExam and on VeriphyT2IBench, Princigram shows that explicit physics-structured supervision improves the physical faithfulness of generated scientific diagrams.

Addressing the growing demands of artificial intelligence (AI) and data analytics requires new computing approaches. In this paper, we propose a reconfigurable hardware accelerator designed specifically for AI and data-intensive applications. Our architecture features a messaging-based intelligent computing scheme that allows for dynamic programming at runtime using a minimal instruction set. To assess our hardware's effectiveness, we conducted a case study in TSMC 28nm technology node. The simulation-based study involved analyzing a protein network using the computationally demanding PageRank algorithm. The results demonstrate that our hardware can analyze a 5,000-node protein network in just 213.6 milliseconds over 100 iterations. These outcomes signify the potential of our design to achieve cutting-edge performance in next-generation AI applications.

We investigate how to enhance the physical fidelity of video generation models by leveraging synthetic videos derived from computer graphics pipelines. These rendered videos respect real-world physics, such as maintaining 3D consistency, and serve as a valuable resource that can potentially improve video generation models. To harness this potential, we propose a solution that curates and integrates synthetic data while introducing a method to transfer its physical realism to the model, significantly reducing unwanted artifacts. Through experiments on three representative tasks emphasizing physical consistency, we demonstrate its efficacy in enhancing physical fidelity. While our model still lacks a deep understanding of physics, our work offers one of the first empirical demonstrations that synthetic video enhances physical fidelity in video synthesis. Website: https://kevinz8866.github.io/simulation/

Physical therapy (PT) is crucial for patients to restore and maintain mobility, function, and well-being. Many on-site activities and body exercises are performed under the supervision of therapists or clinicians. However, the postures of some exercises at home cannot be performed accurately due to the lack of supervision, quality assessment, and self-correction. Therefore, in this paper, we design a new framework, PhysiQ, that continuously tracks and quantitatively measures people's off-site exercise activity through passive sensory detection. In the framework, we create a novel multi-task spatio-temporal Siamese Neural Network that measures the absolute quality through classification and relative quality based on an individual's PT progress through similarity comparison. PhysiQ digitizes and evaluates exercises in three different metrics: range of motions, stability, and repetition.

Recent advances in video generation have shown remarkable potential for constructing world simulators. However, current models still struggle to produce physically consistent results, particularly when handling large-scale or complex dynamics. This limitation arises primarily because existing approaches respond isotropically to physical prompts and neglect the fine-grained alignment between generated content and localized physical cues. To address these challenges, we propose ProPhy, a Progressive Physical Alignment Framework that enables explicit physics-aware conditioning and anisotropic generation. ProPhy employs a two-stage Mixture-of-Physics-Experts (MoPE) mechanism for discriminative physical prior extraction, where Semantic Experts infer semantic-level physical principles from textual descriptions, and Refinement Experts capture token-level physical dynamics. This mechanism allows the model to learn fine-grained, physics-aware video representations that better reflect underlying physical laws. Furthermore, we introduce a physical alignment strategy that transfers the physical reasoning capabilities of vision-language models (VLMs) into the Refinement Experts, facilitating a more accurate representation of dynamic physical phenomena. Extensive experiments on physics-aware video generation benchmarks demonstrate that ProPhy produces more realistic, dynamic, and physically coherent results than existing state-of-the-art methods.

Instruction-based image editing has achieved remarkable success in semantic alignment, yet state-of-the-art models frequently fail to render physically plausible results when editing involves complex causal dynamics, such as refraction or material deformation. We attribute this limitation to the dominant paradigm that treats editing as a discrete mapping between image pairs, which provides only boundary conditions and leaves transition dynamics underspecified. To address this, we reformulate physics-aware editing as predictive physical state transitions and introduce PhysicTran38K, a large-scale video-based dataset comprising 38K transition trajectories across five physical domains, constructed via a two-stage filtering and constraint-aware annotation pipeline. Building on this supervision, we propose PhysicEdit, an end-to-end framework equipped with a textual-visual dual-thinking mechanism. It combines a frozen Qwen2.5-VL for physically grounded reasoning with learnable transition queries that provide timestep-adaptive visual guidance to a diffusion backbone. Experiments show that PhysicEdit improves over Qwen-Image-Edit by 5.9% in physical realism and 10.1% in knowledge-grounded editing, setting a new state-of-the-art for open-source methods, while remaining competitive with leading proprietary models.

We have witnessed remarkable advances in LLM reasoning capabilities with the advent of DeepSeek-R1. However, much of this progress has been fueled by the abundance of internet question-answer (QA) pairs, a major bottleneck going forward, since such data is limited in scale and concentrated mainly in domains like mathematics. In contrast, other sciences such as physics lack large-scale QA datasets to effectively train reasoning-capable models. In this work, we show that physics simulators can serve as a powerful alternative source of supervision for training LLMs for physical reasoning. We generate random scenes in physics engines, create synthetic question-answer pairs from simulated interactions, and train LLMs using reinforcement learning on this synthetic data. Our models exhibit zero-shot sim-to-real transfer to real-world physics benchmarks: for example, training solely on synthetic simulated data improves performance on IPhO (International Physics Olympiad) problems by 5-10 percentage points across model sizes. These results demonstrate that physics simulators can act as scalable data generators, enabling LLMs to acquire deep physical reasoning skills beyond the limitations of internet-scale QA data. Code available at: https://sim2reason.github.io/.

Despite the impressive achievements of Deep Neural Networks (DNNs) in computer vision, their vulnerability to adversarial attacks remains a critical concern. Extensive research has demonstrated that incorporating sophisticated perturbations into input images can lead to a catastrophic degradation in DNNs' performance. This perplexing phenomenon not only exists in the digital space but also in the physical world. Consequently, it becomes imperative to evaluate the security of DNNs-based systems to ensure their safe deployment in real-world scenarios, particularly in security-sensitive applications. To facilitate a profound understanding of this topic, this paper presents a comprehensive overview of physical adversarial attacks. Firstly, we distill four general steps for launching physical adversarial attacks. Building upon this foundation, we uncover the pervasive role of artifacts carrying adversarial perturbations in the physical world. These artifacts influence each step. To denote them, we introduce a new term: adversarial medium. Then, we take the first step to systematically evaluate the performance of physical adversarial attacks, taking the adversarial medium as a first attempt. Our proposed evaluation metric, hiPAA, comprises six perspectives: Effectiveness, Stealthiness, Robustness, Practicability, Aesthetics, and Economics. We also provide comparative results across task categories, together with insightful observations and suggestions for future research directions.

We present Isaac Lab, the natural successor to Isaac Gym, which extends the paradigm of GPU-native robotics simulation into the era of large-scale multi-modal learning. Isaac Lab combines high-fidelity GPU parallel physics, photorealistic rendering, and a modular, composable architecture for designing environments and training robot policies. Beyond physics and rendering, the framework integrates actuator models, multi-frequency sensor simulation, data collection pipelines, and domain randomization tools, unifying best practices for reinforcement and imitation learning at scale within a single extensible platform. We highlight its application to a diverse set of challenges, including whole-body control, cross-embodiment mobility, contact-rich and dexterous manipulation, and the integration of human demonstrations for skill acquisition. Finally, we discuss upcoming integration with the differentiable, GPU-accelerated Newton physics engine, which promises new opportunities for scalable, data-efficient, and gradient-based approaches to robot learning. We believe Isaac Lab's combination of advanced simulation capabilities, rich sensing, and data-center scale execution will help unlock the next generation of breakthroughs in robotics research.

Physical AI models are evaluated on suites of benchmarks that differ across model reports, leaving the model-by-benchmark matrix sparse and the relationship between benchmarks unmeasured. We construct a matrix of 51 models on 12 physical AI benchmarks, selected from a registry of 51 benchmarks and 152 models by reporting density, combining scores from model cards and benchmark papers with our own evaluation runs under each benchmark's official protocol. We measure how much information the benchmarks share and show quantitative evidence of Redundancy. Redundancy affects reported rankings: collapsing the two substitute pairs into single columns moves 22 of 51 models by three or more places under an equally weighted average. We then select benchmarks greedily under a utility combining score dispersion with variance not explained by the already-selected set, and obtain a four-benchmark subset retaining 78.5\% of the utility of all 12, on which we fit a Bradley--Terry ranking. The procedure requires only benchmark-level scores with sufficient overlap and is not specific to physical AI.

Accurate and efficient physical simulations are essential in science and engineering, yet traditional numerical solvers face significant challenges in computational cost when handling simulations across dynamic scenarios involving complex geometries, varying boundary/initial conditions, and diverse physical parameters. While deep learning offers promising alternatives, existing methods often struggle with flexibility and generalization, particularly on unstructured meshes, which significantly limits their practical applicability. To address these challenges, we propose PhysGTO, an efficient Graph-Transformer Operator for learning physical dynamics through explicit manifold embeddings in both physical and latent spaces. In the physical space, the proposed Unified Graph Embedding module aligns node-level conditions and constructs sparse yet structure-preserving graph connectivity to process heterogeneous inputs. In the latent space, PhysGTO integrates a lightweight flux-oriented message-passing scheme with projection-inspired attention to capture local and global dependencies, facilitating multilevel interactions among complex physical correlations. This design ensures linear complexity relative to the number of mesh points, reducing both the number of trainable parameters and computational costs in terms of floating-point operations (FLOPs), and thereby allowing efficient inference in real-time applications. We introduce a comprehensive benchmark spanning eleven datasets, covering problems with unstructured meshes, transient flow dynamics, and large-scale 3D geometries. PhysGTO consistently achieves state-of-the-art accuracy while significantly reducing computational costs, demonstrating superior flexibility, scalability, and generalization in a wide range of simulation tasks.

As computational demands continue to rise, assessing the environmental footprint of AI requires moving beyond energy and water consumption to include the material demands of specialized hardware. This study quantifies the material footprint of AI training by linking computational workloads to physical hardware needs. The elemental composition of the Nvidia A100 SXM 40 GB graphics processing unit (GPU) was analyzed using inductively coupled plasma optical emission spectroscopy, which identified 32 elements. The results show that AI hardware consists of about 90% heavy metals and only trace amounts of precious metals. The elements copper, iron, tin, silicon, and nickel dominate the GPU composition by mass. In a multi-step methodology, we integrate these measurements with computational throughput per GPU across varying lifespans, accounting for the computational requirements of training specific AI models at different training efficiency regimes. Scenario-based analyses reveal that, depending on Model FLOPs Utilization (MFU) and hardware lifespan, training GPT-4 requires between 1,174 and 8,800 A100 GPUs, corresponding to the extraction and eventual disposal of up to 7 tons of toxic elements. Combined software and hardware optimization strategies can reduce material demands: increasing MFU from 20% to 60% lowers GPU requirements by 67%, while extending lifespan from 1 to 3 years yields comparable savings; implementing both measures together reduces GPU needs by up to 93%. Our findings highlight that incremental performance gains, such as those observed between GPT-3.5 and GPT-4, come at disproportionately high material costs. The study underscores the necessity of incorporating material resource considerations into discussions of AI scalability, emphasizing that future progress in AI must align with principles of resource efficiency and environmental responsibility.

The human brain is a complex spiking neural network (SNN) that learns multimodal signals in a zero-shot manner by generalizing existing knowledge. Remarkably, the brain achieves this with minimal power consumption, using event-based signals that propagate within its structure. However, mimicking the human brain in neuromorphic hardware presents both hardware and software challenges. Hardware limitations, such as the slowdown of Moore's law and the von Neumann bottleneck, hinder the efficiency of digital computers. On the software side, SNNs are known for their difficult training, especially when learning multimodal signals. To overcome these challenges, we propose a hardware-software co-design that combines a fixed and random liquid state machine (LSM) SNN encoder with trainable artificial neural network (ANN) projections. The LSM is physically implemented using analogue resistive memory, leveraging the inherent stochasticity of resistive switching to generate random weights. This highly efficient and nanoscale in-memory computing approach effectively addresses the von Neumann bottleneck and the slowdown of Moore's law. The ANN projections are implemented digitally, allowing for easy optimization using contrastive loss, which helps to overcome the difficulties associated with SNN training. We experimentally implement this co-design on a 40nm 256Kb in-memory computing macro. We first demonstrate LSM-based event encoding through supervised classification and linear probing on the N-MNIST and N-TIDIGITS datasets.

While current vision algorithms excel at many challenging tasks, it is unclear how well they understand the physical dynamics of real-world environments. Here we introduce Physion, a dataset and benchmark for rigorously evaluating the ability to predict how physical scenarios will evolve over time. Our dataset features realistic simulations of a wide range of physical phenomena, including rigid and soft-body collisions, stable multi-object configurations, rolling, sliding, and projectile motion, thus providing a more comprehensive challenge than previous benchmarks. We used Physion to benchmark a suite of models varying in their architecture, learning objective, input-output structure, and training data. In parallel, we obtained precise measurements of human prediction behavior on the same set of scenarios, allowing us to directly evaluate how well any model could approximate human behavior. We found that vision algorithms that learn object-centric representations generally outperform those that do not, yet still fall far short of human performance. On the other hand, graph neural networks with direct access to physical state information both perform substantially better and make predictions that are more similar to those made by humans. These results suggest that extracting physical representations of scenes is the main bottleneck to achieving human-level and human-like physical understanding in vision algorithms. We have publicly released all data and code to facilitate the use of Physion to benchmark additional models in a fully reproducible manner, enabling systematic evaluation of progress towards vision algorithms that understand physical environments as robustly as people do.

We introduce PAT3D, the first physics-augmented text-to-3D scene generation framework that integrates vision-language models with physics-based simulation to produce physically plausible, simulation-ready, and intersection-free 3D scenes. Given a text prompt, PAT3D generates 3D objects, infers their spatial relations, and organizes them into a hierarchical scene tree, which is then converted into initial conditions for simulation. A differentiable rigid-body simulator ensures realistic object interactions under gravity, driving the scene toward static equilibrium without interpenetrations. To further enhance scene quality, we introduce a simulation-in-the-loop optimization procedure that guarantees physical stability and non-intersection, while improving semantic consistency with the input prompt. Experiments demonstrate that PAT3D substantially outperforms prior approaches in physical plausibility, semantic consistency, and visual quality. Beyond high-quality generation, PAT3D uniquely enables simulation-ready 3D scenes for downstream tasks such as scene editing and robotic manipulation. Code and data are available at: https://github.com/Simulation-Intelligence/PAT3D.

Machine learning, particularly in the form of deep learning, has driven most of the recent fundamental developments in artificial intelligence. Deep learning is based on computational models that are, to a certain extent, bio-inspired, as they rely on networks of connected simple computing units operating in parallel. Deep learning has been successfully applied in areas such as object/pattern recognition, speech and natural language processing, self-driving vehicles, intelligent self-diagnostics tools, autonomous robots, knowledgeable personal assistants, and monitoring. These successes have been mostly supported by three factors: availability of vast amounts of data, continuous growth in computing power, and algorithmic innovations. The approaching demise of Moore's law, and the consequent expected modest improvements in computing power that can be achieved by scaling, raise the question of whether the described progress will be slowed or halted due to hardware limitations. This paper reviews the case for a novel beyond CMOS hardware technology, memristors, as a potential solution for the implementation of power-efficient in-memory computing, deep learning accelerators, and spiking neural networks. Central themes are the reliance on non-von-Neumann computing architectures and the need for developing tailored learning and inference algorithms. To argue that lessons from biology can be useful in providing directions for further progress in artificial intelligence, we briefly discuss an example based reservoir computing. We conclude the review by speculating on the big picture view of future neuromorphic and brain-inspired computing systems.

Humans possess an exceptional ability to imagine 4D scenes, encompassing both motion and 3D geometry, from a single still image. This ability is rooted in our accumulated observations of similar scenes and an intuitive understanding of physics. In this paper, we aim to replicate this capacity in neural networks, specifically focusing on natural fluid imagery. Existing methods for this task typically employ simplistic 2D motion estimators to animate the image, leading to motion predictions that often defy physical principles, resulting in unrealistic animations. Our approach introduces a novel method for generating 4D scenes with physics-consistent animation from a single image. We propose the use of a physics-informed neural network that predicts motion for each surface point, guided by a loss term derived from fundamental physical principles, including the Navier-Stokes equations. To capture appearance, we predict feature-based 3D Gaussians from the input image and its estimated depth, which are then animated using the predicted motions and rendered from any desired camera perspective. Experimental results highlight the effectiveness of our method in producing physically plausible animations, showcasing significant performance improvements over existing methods. Our project page is https://physfluid.github.io/ .

Artificial Neural Networks are computational network models inspired by signal processing in the brain. These models have dramatically improved the performance of many learning tasks, including speech and object recognition. However, today's computing hardware is inefficient at implementing neural networks, in large part because much of it was designed for von Neumann computing schemes. Significant effort has been made to develop electronic architectures tuned to implement artificial neural networks that improve upon both computational speed and energy efficiency. Here, we propose a new architecture for a fully-optical neural network that, using unique advantages of optics, promises a computational speed enhancement of at least two orders of magnitude over the state-of-the-art and three orders of magnitude in power efficiency for conventional learning tasks. We experimentally demonstrate essential parts of our architecture using a programmable nanophotonic processor.

Generating physics diagrams from text requires strict adherence to physical laws. While current generative models produce visually plausible outputs, they systematically hallucinate force vectors, ignore conservation laws, and violate geometric constraints. We present PhyDrawGen, a neuro-symbolic pipeline that decouples semantic scene understanding from physical constraint satisfaction. First, a large language model extracts a typed scene graph from the problem text. A deterministic solver then converts this graph into a Planar Straight-Line Graph (PSLG), encoding force balance, optical paths, and field topologies as exact geometric primitives. Finally, a fine-tuned Qwen-VL model implements a visually grounded propose-verify loop to iteratively correct any constraint violations. Evaluated on a benchmark of 1,449 problems spanning mechanics, optics, and electromagnetism, PhyDrawGen significantly outperforms GPT-5-image, Gemini 2.5 Flash, and Gemini 3 Pro, demonstrating robust physical accuracy even on unusual-object problems.

Generative world models are increasingly used for video generation, where learned simulators are expected to capture the physical rules that govern real-world dynamics. However, evaluating whether generated videos actually follow these rules remains challenging. Existing physics-focused video benchmarks have made important progress, but they still face three key challenges, including the coarse evaluation frameworks that hide law-specific failures, response biases and fatigue that undermine the validity of annotation judgments, and automated evaluators that are insufficiently physics-aware or difficult to audit. To address those challenges, we introduce PhyGround, a criteria-grounded benchmark for evaluating physical reasoning in video generation. The benchmark contains 250 curated prompts, each augmented with an expected physical outcome, and a taxonomy of 13 physical laws across solid-body mechanics, fluid dynamics, and optics. Each law is operationalized through observable sub-questions to enable per-law diagnostics. We evaluate eight modern video generation models through a large-scale, quality-controlled human study, grounded on social science lab experiment design. A total of 459 annotators provided 5,796 complete annotations and over 37.4K fine-grained labels; after quality control, the retained annotations exhibited high split-half model-ranking correlations (Spearman's rho > 0.90). To support reproducible automated evaluation, we release PhyJudge-9B, an open physics-specialized VLM judge. PhyJudge-9B achieves substantially lower aggregate relative bias than Gemini-3.1-Pro (3.3% vs. 16.6%). We release prompts, human annotations, model checkpoints, and evaluation code on the project page https://phyground.github.io/.

This document is a hands-on, comprehensive guide to deep learning in the realm of physical simulations. Rather than just theory, we emphasize practical application: every concept is paired with interactive Jupyter notebooks to get you up and running quickly. Beyond traditional supervised learning, we dive into physical loss-constraints, differentiable simulations, diffusion-based approaches for probabilistic generative AI, as well as reinforcement learning and advanced neural network architectures. These foundations are paving the way for the next generation of scientific foundation models. We are living in an era of rapid transformation. These methods have the potential to redefine what's possible in computational science.

Predicting the evolution of complex physical systems remains a central problem in science and engineering. Despite rapid progress in scientific Machine Learning (ML) models, a critical bottleneck is the lack of expensive real-world data, resulting in most current models being trained and validated on simulated data. Beyond limiting the development and evaluation of scientific ML, this gap also hinders research into essential tasks such as sim-to-real transfer. We introduce RealPDEBench, the first benchmark for scientific ML that integrates real-world measurements with paired numerical simulations. RealPDEBench consists of five datasets, three tasks, eight metrics, and ten baselines. We first present five real-world measured datasets with paired simulated datasets across different complex physical systems. We further define three tasks, which allow comparisons between real-world and simulated data, and facilitate the development of methods to bridge the two. Moreover, we design eight evaluation metrics, spanning data-oriented and physics-oriented metrics, and finally benchmark ten representative baselines, including state-of-the-art models, pretrained PDE foundation models, and a traditional method. Experiments reveal significant discrepancies between simulated and real-world data, while showing that pretraining with simulated data consistently improves both accuracy and convergence. In this work, we hope to provide insights from real-world data, advancing scientific ML toward bridging the sim-to-real gap and real-world deployment. Our benchmark, datasets, and instructions are available at https://realpdebench.github.io/.

Data-driven embodied AI is rapidly transitioning into a paradigm that scales training through massively parallel simulation, where GPU-accelerated simulators serve as the foundational data infrastructure. However, as computational throughput scales, the underlying trade-offs between parallel efficiency, physical fidelity, and execution determinism remain largely unexamined, hindering the development of reliable robot learning. In this paper, we expose the hidden limits of mainstream GPU-based robotic simulators (e.g., Isaac Lab, Genesis) by introducing GPUSimBench, which focuses on scalability, physical consistency, and computational determinism. First, GPUSimBench establishes a physical grounding evaluation with a controlled inclined-plane task, quantifying the distributional alignment between simulated dynamics and their real-world counterparts. Second, we benchmark parallel scalability by measuring throughput and memory footprints across scaling environment counts. Crucially, beyond standard performance metrics, we unveil and quantify the inherent non-determinism introduced by GPU-batched execution, characterized by significant run-to-run and inter-environment variability even under identical initial conditions. Finally, we identify four empirical regimes of stochasticity within current simulator stacks, highlighting that unbounded scaling can compromise reproducibility without explicit constraints.

We introduce [Cosmos-Predict2.5], the latest generation of the Cosmos World Foundation Models for Physical AI. Built on a flow-based architecture, [Cosmos-Predict2.5] unifies Text2World, Image2World, and Video2World generation in a single model and leverages [Cosmos-Reason1], a Physical AI vision-language model, to provide richer text grounding and finer control of world simulation. Trained on 200M curated video clips and refined with reinforcement learning-based post-training, [Cosmos-Predict2.5] achieves substantial improvements over [Cosmos-Predict1] in video quality and instruction alignment, with models released at 2B and 14B scales. These capabilities enable more reliable synthetic data generation, policy evaluation, and closed-loop simulation for robotics and autonomous systems. We further extend the family with [Cosmos-Transfer2.5], a control-net style framework for Sim2Real and Real2Real world translation. Despite being 3.5times smaller than [Cosmos-Transfer1], it delivers higher fidelity and robust long-horizon video generation. Together, these advances establish [Cosmos-Predict2.5] and [Cosmos-Transfer2.5] as versatile tools for scaling embodied intelligence. To accelerate research and deployment in Physical AI, we release source code, pretrained checkpoints, and curated benchmarks under the NVIDIA Open Model License at https://github.com/nvidia-cosmos/cosmos-predict2.5 and https://github.com/nvidia-cosmos/cosmos-transfer2.5. We hope these open resources lower the barrier to adoption and foster innovation in building the next generation of embodied intelligence.

Deformable object manipulation poses challenges beyond task completion: successful execution must also maintain safe physical interaction, holding the object stably without slip or drop while avoiding excessive deformation. However, existing manipulation benchmarks are predominantly success-oriented and rarely evaluate whether a policy remains physically safe throughout execution. We present SoftVTBench, a safety-aware visuo-tactile benchmark for physically constrained deformable object manipulation. Built in Isaac Sim with finite-element-simulated deformable objects, SoftVTBench provides multi-view RGB observations, RGB tactile sensing with marker motion, proprioception, and language instructions, and defines four matched task suites over object type (deformable vs. rigid) and variation axis (object vs. spatial). It separately reports Goal Success and Safety Success; the latter additionally requires no drop and peak deformation below a calibrated object-specific threshold, measured from policy-hidden privileged Finite Element Method (FEM) states. We implement pi0.5-based baselines under this protocol. Experiments show that success-only evaluation substantially overstates policy performance, as a large fraction of goal-completing rollouts still violate physical safety. Furthermore, incorporating tactile sensing improves Safety Success (e.g., from 21.4% to 35.6% on object-centric deformable tasks) and reduces object deformation during execution, while maintaining comparable Goal Success. SoftVTBench provides a reproducible benchmark for studying visuo-tactile deformable manipulation under physical interaction constraints.

We present PhysCaP, a Physics-Informed Code-as-Policy agent for active perception in robotic manipulation. While vision-language-action policies excel at imitating demonstrations, they rely on passive observation and fail to infer latent physical properties critical for manipulation. PhysCaP augments code-as-policy frameworks with a physics-informed exploration layer that enables explicit information-seeking through interaction. It introduces training-free physical property extraction modules that estimate object mass and stiffness from robot proprioception without additional sensors. To balance exploration costs and the efficiency of information obtained, PhysCaP employs a dual-agent design: a Planner that decides when to explore and when to stop, and a Prioritizer that filters implausible interactions and ranks the remainder using a heuristic priority score, enabling efficient, targeted exploration. We evaluate PhysCaP on real-world tabletop manipulation tasks (searching for hidden objects, detecting empty cans, and finding ripe avocados) and a simulated task in LIBERO. The results show that existing passive and naive interactive baselines either fail when physical properties are hidden or over-explore, whereas PhysCaP achieves comparable performance with fewer interactions and reduced execution time. Ablation studies further validate the effectiveness of the proposed physical property extraction modules. Project page: https://physcap.github.io

While machine learning has advanced through massive parallelization, we identify a critical blind spot: some problems are fundamentally sequential. These "inherently serial" problems-from mathematical reasoning to physical simulations to sequential decision-making-require dependent computational steps that cannot be parallelized. Drawing from complexity theory, we formalize this distinction and demonstrate that current parallel-centric architectures face fundamental limitations on such tasks. We argue that recognizing the serial nature of computation holds profound implications on machine learning, model design, hardware development. As AI tackles increasingly complex reasoning, deliberately scaling serial computation-not just parallel computation-is essential for continued progress.

Multimodal large language models (MLLMs) are good at video understanding and code generation, but it remains unclear whether they can recover the physical laws underlying videos, a capability essential for converting videos into executable simulations and for providing structured physical supervision in robotics. Captioning motion video does not imply that a model has inferred its governing dynamics, estimated quantitative parameters, or can regenerate the observed scene from code. Existing video-physics benchmarks evaluate plausibility, property estimation, or future-state prediction, but offer limited insight into whether models can translate visual dynamics into runnable simulation code. We introduce PhySimCode, a benchmark for physics video-to-code generation: given only a raw video, a model must infer the relevant physics, recover parameter values, and generate runnable Python that reproduces the input video. The dataset contains 160.6K procedurally generated samples spanning 162 physics phenomena across analytic SciPy simulations and PyBullet-rendered rigid-body, articulated, fluid, and contact-rich scenes; each sample bundles the simulation code, physical parameters, rendered video, and a structured chain-of-thought covering observations, laws, ODEs, numerical methods, and validation checks. We evaluate ten state-of-the-art closed- and open-source MLLMs along physical-law correctness, simulation equivalence, code executability, and parameter recovery. Models reliably state physics laws (4.27-4.93/5) yet score only 1.51-2.47/5 on inferring them from video, and the best system (Claude Sonnet 4.6) recovers just 7.7% of ground-truth parameters within pm 20%, exposing a substantial video-to-simulation gap. The 2,430-video evaluation set is available at https://huggingface.co/datasets/SourajaKundu123/PhySimCode and the evaluation code at https://github.com/SourajaKundu/PhySimCode

The paradigm of agentic science requires AI systems to conduct robust reasoning and engage in long-horizon, autonomous exploration. However, current scientific benchmarks remain confined to domain knowledge comprehension and complex reasoning, failing to evaluate the exploratory nature and procedural complexity of real-world research. In this work, we present research-oriented evaluations in theoretical and computational physics, a natural testbed with comprehensive domain knowledge, complex reasoning, and verifiable end-to-end workflows without reliance on experiments. Here we introduce PRL-Bench (Physics Research by LLMs), a benchmark designed to systematically map the capability boundaries of LLMs in executing end-to-end physics research. Constructed from 100 curated papers from the latest issues of Physical Review Letters since August 2025 and validated by domain experts, PRL-Bench covers five major theory- and computation-intensive subfields of modern physics: astrophysics, condensed matter physics, high-energy physics, quantum information, and statistical physics. Each task in the benchmark is designed to replicate the core properties of authentic scientific research, including exploration-oriented formulation, long-horizon workflows, and objective verifiability, thereby reconstructing the essential reasoning processes and research workflows of real physics research. Evaluation across frontier models shows that performance remains limited, with the best overall score below 50, revealing a pronounced gap between current LLM capabilities and the demands of real scientific research. PRL-Bench serves a reliable testbed for accessing next generation AI scientists advancing AI systems toward autonomous scientific discovery.

Edge computing, with its low latency, dynamic scalability, and location awareness, along with the convergence of computing and communication paradigms, has been successfully applied in critical domains such as industrial IoT, smart healthcare, smart homes, and public safety. This paper provides a comprehensive survey of open-source edge computing simulators and emulators, presented in our GitHub repository (https://github.com/qijianpeng/awesome-edge-computing), emphasizing the convergence of computing and networking paradigms. By examining more than 40 tools, including CloudSim, NS-3, and others, we identify the strengths and limitations in simulating and emulating edge environments. This survey classifies these tools into three categories: packet-level, application-level, and emulators. Furthermore, we evaluate them across five dimensions, ranging from resource representation to resource utilization. The survey highlights the integration of different computing paradigms, packet processing capabilities, support for edge environments, user-defined metric interfaces, and scenario visualization. The findings aim to guide researchers in selecting appropriate tools for developing and validating advanced computing and networking technologies.

Solving partial differential equations (PDEs) with machine learning has recently attracted great attention, as PDEs are fundamental tools for modeling real-world systems that range from fundamental physical science to advanced engineering disciplines. Most real-world physical systems across various disciplines are actually involved in multiple coupled physical fields rather than a single field. However, previous machine learning studies mainly focused on solving single-field problems, but overlooked the importance and characteristics of multiphysics problems in real world. Multiphysics PDEs typically entail multiple strongly coupled variables, thereby introducing additional complexity and challenges, such as inter-field coupling. Both benchmarking and solving multiphysics problems with machine learning remain largely unexamined. To identify and address the emerging challenges in multiphysics problems, we mainly made three contributions in this work. First, we collect the first general multiphysics dataset, the Multiphysics Bench, that focuses on multiphysics PDE solving with machine learning. Multiphysics Bench is also the most comprehensive PDE dataset to date, featuring the broadest range of coupling types, the greatest diversity of PDE formulations, and the largest dataset scale. Second, we conduct the first systematic investigation on multiple representative learning-based PDE solvers, such as PINNs, FNO, DeepONet, and DiffusionPDE solvers, on multiphysics problems. Unfortunately, naively applying these existing solvers usually show very poor performance for solving multiphysics. Third, through extensive experiments and discussions, we report multiple insights and a bag of useful tricks for solving multiphysics with machine learning, motivating future directions in the study and simulation of complex, coupled physical systems.

We propose a new frontier: Neural Computers (NCs) -- an emerging machine form that unifies computation, memory, and I/O in a learned runtime state. Unlike conventional computers, which execute explicit programs, agents, which act over external execution environments, and world models, which learn environment dynamics, NCs aim to make the model itself the running computer. Our long-term goal is the Completely Neural Computer (CNC): the mature, general-purpose realization of this emerging machine form, with stable execution, explicit reprogramming, and durable capability reuse. As an initial step, we study whether early NC primitives can be learned solely from collected I/O traces, without instrumented program state. Concretely, we instantiate NCs as video models that roll out screen frames from instructions, pixels, and user actions (when available) in CLI and GUI settings. These implementations show that learned runtimes can acquire early interface primitives, especially I/O alignment and short-horizon control, while routine reuse, controlled updates, and symbolic stability remain open. We outline a roadmap toward CNCs around these challenges. If overcome, CNCs could establish a new computing paradigm beyond today's agents, world models, and conventional computers.

Low Earth orbit (LEO) satellites increasingly carry compute hardware capable of on-board processing, yet each satellite generates roughly two orders of magnitude more data than it can downlink per orbit. This mismatch forces operators to decide, for every workload, which computation runs on-board and which runs on the ground, how intermediate data crosses the space-ground boundary through narrow contact windows, and how to maintain delivery guarantees over noisy channels. We present Constraint-Aware Execution (CAE), a planning system that takes a satellite identifier, a workload expressed as a directed acyclic graph of processing steps, and a set of orbital and resource constraints, and produces a deterministic, physically grounded execution plan. CAE operates in four phases: (1) orbital environment construction via SGP4 propagation with eclipse detection and ground station pass prediction, (2) compute placement using a cost model that compares on-board resource consumption against transfer overhead, (3) transfer insertion with adaptive forward error correction and security overhead modeling, and (4) greedy first-fit scheduling into orbital windows under power, thermal, compute, and communication constraints. We evaluate CAE against five representative workload patterns across satellites in distinct orbital regimes and demonstrate that the system produces feasible plans in under two seconds, correctly exploits onboard data reduction to minimize transfer volume, and adapts FEC and multi-pass allocation to varying channel conditions. CAE is deployed as a production API computing plans for any cataloged satellite using live two-line element data.

Recent advances in real-time interactive text-driven motion generation have enabled humanoids to perform diverse behaviors. However, kinematics-only generators often exhibit physical hallucinations, producing motion trajectories that are physically infeasible to track with a downstream motion tracking controller or unsafe for real-world deployment. These failures often arise from the lack of explicit physics-aware objectives for real-robot execution and become more severe under out-of-distribution (OOD) user inputs. Hence, we propose SafeFlow, a text-driven humanoid whole-body control framework that combines physics-guided motion generation with a 3-Stage Safety Gate driven by explicit risk indicators. SafeFlow adopts a two-level architecture. At the high level, we generate motion trajectories using Physics-Guided Rectified Flow Matching in a VAE latent space to improve real-robot executability, and further accelerate sampling via Reflow to reduce the number of function evaluations (NFE) for real-time control. The 3-Stage Safety Gate enables selective execution by detecting semantic OOD prompts using a Mahalanobis score in text-embedding space, filtering unstable generations via a directional sensitivity discrepancy metric, and enforcing final hard kinematic constraints such as joint and velocity limits before passing the generated trajectory to a low-level motion tracking controller. Extensive experiments on the Unitree G1 demonstrate that SafeFlow outperforms prior diffusion-based methods in success rate, physical compliance, and inference speed, while maintaining diverse expressiveness.