Daily Papers

The Wasserstein-Fisher-Rao (WFR) metric extends dynamic optimal transport (OT) by coupling displacement with change of mass, providing a principled geometry for modeling unbalanced snapshot dynamics. Existing WFR solvers, however, are often unstable, computationally expensive, and difficult to scale. Here we introduce WFR Flow Matching (WFR-FM), a simulation-free training algorithm that unifies flow matching with dynamic unbalanced OT. Unlike classical flow matching which regresses only a transport vector field, WFR-FM simultaneously regresses a vector field for displacement and a scalar growth rate function for birth-death dynamics, yielding continuous flows under the WFR geometry. Theoretically, we show that minimizing the WFR-FM loss exactly recovers WFR geodesics. Empirically, WFR-FM yields more accurate and robust trajectory inference in single-cell biology, reconstructing consistent dynamics with proliferation and apoptosis, estimating time-varying growth fields, and applying to generative dynamics under imbalanced data. It outperforms state-of-the-art baselines in efficiency, stability, and reconstruction accuracy. Overall, WFR-FM establishes a unified and efficient paradigm for learning dynamical systems from unbalanced snapshots, where not only states but also mass evolve over time. The Python code is available at https://github.com/QiangweiPeng/WFR-FM.

Inferring cellular dynamics from unpaired single-cell snapshots requires modeling both state transitions and population growth or death. Unbalanced dynamic optimal transport (UDOT) addresses this by penalizing growth along transport paths, making the choice of growth penalty a key way to encode biological priors on proliferation and apoptosis. However, existing UDOT solvers either rely on computationally expensive NeuralODE simulations or depend on analytical solutions of conditional paths, restricting their efficiency solely to quadratic penalties, i.e. Wasserstein-Fisher-Rao (WFR) geodesics. To enable an efficient UDOT solver for general growth penalties, we first show that concave growth penalties lead to degenerate solutions where growth and transport are separated. We then introduce Simulation-free Unbalanced Dynamic Optimal transport (SUDO), a simulation-free framework for UDOT with general non-quadratic convex growth penalties. SUDO learns the conditional paths and transport costs, solves the induced semi-coupling problem, and subsequently leverages unbalanced flow matching to achieve a simulation-free solution. On WFR benchmarks, SUDO matches the accuracy of efficient, analytical solution-driven algorithms while outperforming simulation-based methods in computational speed. Beyond WFR, SUDO supports asymmetric penalties that encode proliferation-dominant priors and produce more plausible trajectories and growth estimates on synthetic and single-cell datasets.

Feedforward 3D reconstruction has largely followed an {appearance-driven paradigm}: multi-view images are encoded into visual representations, cross-view correspondence is implicitly inferred from learned features, and 3D primitives are subsequently predicted from these representations. However, calibrated cameras and sparse metric measurements already provide explicit constraints on where the same physical point should appear across views. We propose a novel paradigm, Geometry-Conditioned Feedforward Reconstruction, in which metric geometry establishes cross-view correspondence before the 3D representation is formed, while learned visual features refine rather than discover this correspondence. Based on this paradigm, we introduce GeoForward. Sparse LiDAR points are unprojected into 3D and analytically projected across calibrated cameras to provide metric correspondence anchors. A bounded continuous local search then refines these anchors using visual features, and the resulting geometry-conditioned representation is fused with global multi-view context from VGGT. The shared representation drives separate metric-depth and Gaussian-attribute prediction, establishing a direct path from explicit geometry to both Gaussian centers and spatial attributes. A sparse 3D refinement module subsequently improves local attribute compatibility while preserving the geometrically determined centers. For temporal reconstruction, endpoint Gaussians are composed using vehicle masks and motion priors. On nuScenes, GeoForward achieves the lowest cross-camera depth-consistency error and Chamfer distance among the compared methods while maintaining competitive reconstruction quality. These results demonstrate that explicitly conditioning correspondence formation on metric geometry provides an effective alternative to purely appearance-driven feedforward 3D reconstruction.

We present a novel geometric perspective on the latent space of diffusion models. We first show that the standard pullback approach, utilizing the deterministic probability flow ODE decoder, is fundamentally flawed. It provably forces geodesics to decode as straight segments in data space, effectively ignoring any intrinsic data geometry beyond the ambient Euclidean space. Complementing this view, diffusion also admits a stochastic decoder via the reverse SDE, which enables an information geometric treatment with the Fisher-Rao metric. However, a choice of x_T as the latent representation collapses this metric due to memorylessness. We address this by introducing a latent spacetime z=(x_t,t) that indexes the family of denoising distributions p(x_0 | x_t) across all noise scales, yielding a nontrivial geometric structure. We prove these distributions form an exponential family and derive simulation-free estimators for curve lengths, enabling efficient geodesic computation. The resulting structure induces a principled Diffusion Edit Distance, where geodesics trace minimal sequences of noise and denoise edits between data. We also demonstrate benefits for transition path sampling in molecular systems, including constrained variants such as low-variance transitions and region avoidance. Code is available at: https://github.com/rafalkarczewski/spacetime-geometry.

Symmetric Positive Definite (SPD) matrices are ubiquitous in data analysis under the form of covariance matrices or correlation matrices. Several O(n)-invariant Riemannian metrics were defined on the SPD cone, in particular the kernel metrics introduced by Hiai and Petz. The class of kernel metrics interpolates between many classical O(n)-invariant metrics and it satisfies key results of stability and completeness. However, it does not contain all the classical O(n)-invariant metrics. Therefore in this work, we investigate super-classes of kernel metrics and we study which key results remain true. We also introduce an additional key result called cometric-stability, a crucial property to implement geodesics with a Hamiltonian formulation. Our method to build intermediate embedded classes between O(n)-invariant metrics and kernel metrics is to give a characterization of the whole class of O(n)-invariant metrics on SPD matrices and to specify requirements on metrics one by one until we reach kernel metrics. As a secondary contribution, we synthesize the literature on the main O(n)-invariant metrics, we provide the complete formula of the sectional curvature of the affine-invariant metric and the formula of the geodesic parallel transport between commuting matrices for the Bures-Wasserstein metric.

Cross-view geo-spatial learning consists of two important tasks: Cross-View Geo-Localization (CVGL) and Cross-View Image Synthesis (CVIS), both of which rely on establishing geometric correspondences between ground and aerial views. Recent Geometric Foundation Models (GFMs) have demonstrated strong capabilities in extracting generalizable 3D geometric features from images, but their potential in cross-view geo-spatial tasks remains underexplored. In this work, we present Geo^2, a unified framework that leverages Geometric priors from GFMs (e.g., VGGT) to jointly perform geo-spatial tasks, CVGL and bidirectional CVIS. Despite the 3D reconstruction ability of GFMs, directly applying them to CVGL and CVIS remains challenging due to the large viewpoint gap between ground and aerial imagery. We propose GeoMap, which embeds ground and aerial features into a shared 3D-aware latent space, effectively reducing cross-view discrepancies for localization. This shared latent space naturally bridges cross-view image synthesis in both directions. To exploit this, we propose GeoFlow, a flow-matching model conditioned on geometry-aware latent embeddings. We further introduce a consistency loss to enforce latent alignment between the two synthesis directions, ensuring bidirectional coherence. Extensive experiments on standard benchmarks, including CVUSA, CVACT, and VIGOR, demonstrate that Geo^2 achieves state-of-the-art performance in both localization and synthesis, highlighting the effectiveness of 3D geometric priors for cross-view geo-spatial learning.

Differential geometric approaches to the analysis and processing of data in the form of symmetric positive definite (SPD) matrices have had notable successful applications to numerous fields including computer vision, medical imaging, and machine learning. The dominant geometric paradigm for such applications has consisted of a few Riemannian geometries associated with spectral computations that are costly at high scale and in high dimensions. We present a route to a scalable geometric framework for the analysis and processing of SPD-valued data based on the efficient computation of extreme generalized eigenvalues through the Hilbert and Thompson geometries of the semidefinite cone. We explore a particular geodesic space structure based on Thompson geometry in detail and establish several properties associated with this structure. Furthermore, we define a novel iterative mean of SPD matrices based on this geometry and prove its existence and uniqueness for a given finite collection of points. Finally, we state and prove a number of desirable properties that are satisfied by this mean.

Geospatial Foundation Models (GFMs) have emerged as powerful tools for extracting representations from Earth observation data, but their evaluation remains inconsistent and narrow. Existing works often evaluate on suboptimal downstream datasets and tasks, that are often too easy or too narrow, limiting the usefulness of the evaluations to assess the real-world applicability of GFMs. Additionally, there is a distinct lack of diversity in current evaluation protocols, which fail to account for the multiplicity of image resolutions, sensor types, and temporalities, which further complicates the assessment of GFM performance. In particular, most existing benchmarks are geographically biased towards North America and Europe, questioning the global applicability of GFMs. To overcome these challenges, we introduce PANGAEA, a standardized evaluation protocol that covers a diverse set of datasets, tasks, resolutions, sensor modalities, and temporalities. It establishes a robust and widely applicable benchmark for GFMs. We evaluate the most popular GFMs openly available on this benchmark and analyze their performance across several domains. In particular, we compare these models to supervised baselines (e.g. UNet and vanilla ViT), and assess their effectiveness when faced with limited labeled data. Our findings highlight the limitations of GFMs, under different scenarios, showing that they do not consistently outperform supervised models. PANGAEA is designed to be highly extensible, allowing for the seamless inclusion of new datasets, models, and tasks in future research. By releasing the evaluation code and benchmark, we aim to enable other researchers to replicate our experiments and build upon our work, fostering a more principled evaluation protocol for large pre-trained geospatial models. The code is available at https://github.com/VMarsocci/pangaea-bench.

Many scientific datasets, such as molecular conformational ensembles or single-cell tissue measurements, are naturally modeled as meta-distributions: distributions over probability measures on non-Euclidean domains. Existing generative methods largely assume Euclidean geometry and fail to capture this structure. We introduce Riemannian Wasserstein Entropic Flow Matching (RWEFM), a generative framework on the Wasserstein space P_2(M) of a Riemannian manifold (M,g). RWEFM is trained by regressing a neural vector field onto Riemannian optimal transport velocities, using McCann displacement interpolations as conditional paths. We confirm theoretically that this construction leads to a valid flow matching approach on P_2(M) and introduce the Riemannian Entropic Map, a GPU-efficient approximation of the optimal transport map on manifolds. Our experiments show that by respecting the intrinsic geometry of the data, RWEFM can generate whole single-cell samples in hyperspherical latent spaces and protein conformational ensembles on the torus. As RWEFM requires only a geodesic distance and a projection operator, it is not restricted to manifolds with closed-form geometry, which we demonstrate by generating distributions on a general triangulated mesh.

Geometry Foundation Models (GFMs) have substantially advanced monocular 3D reconstruction, yet extending this capability to 4D dynamic understanding remains a fundamental challenge. Most existing motion perception methods (e.g., sparse tracking, dense point-wise flow) treat motion as independent point-wise displacements, ignoring the structured nature of physical motion. However, real-world objects usually obey rigid-body kinematics, and points thus usually move collectively, not in isolation. Motion itself possesses geometric structure: physical objects undergo a set of rigid-body transformations governed by SE(3), rather than unstructured point-wise displacements. Building on this insight, we propose SM4RT, a Structured Motion 4D Reconstruction Transformer for end-to-end 3D reconstruction and structured motion perception. SM4RT introduces Structure-of-Motion to represent scene dynamics, where scene motion is decomposed into a compact set of motion bases, each represented as a temporal sequence of 6D twists in SE(3). Dense scene motion is then recovered by sparse, time-shared per-pixel assignment weights over these bases, ensuring points on the same object share a common rigid-body motion trajectory. SM4RT introduces a parallel motion geometry encoder and decoder that jointly infer 3D geometry, world-coordinate motion, and scene kinematic structure in a single forward pass from monocular RGB video. SM4RT achieves strong motion reconstruction performance while preserving the geometric structure of scene motion.

Residual connections are the de facto mechanism for training deep neural networks stably. Geodesic Normalization (GeoNorm) recasts them on a Riemannian manifold, orthogonalizing each layer output against the current hidden state and applying the resulting update through the Riemannian exponential map. Every hidden state thus keeps a constant ell_{2}-norm, confining the residual stream to a hypersphere. The exponential map, however, is only one member of a broad family of retraction maps. We show that on the hypersphere this entire family collapses to a single scalar design choice. What distinguishes one retraction from another is only how the magnitude of an update is converted into a rotation angle within the plane spanned by the hidden state and the update. This view places Euclidean residual connections and GeoNorm in one framework. Instantiating it with the metric projection retraction and the Cayley retraction yields Proj-SpheretNorm and Cay-SpheretNorm, which are exactly norm-preserving yet require only algebraic operations. Both prove to be members of a one-parameter family of angular retractions, p-SpheretNorm, whose rotation angle saturates rather than growing without bound. The two methods above are recovered exactly at p = 1 and p = 2, while the identity map and GeoNorm arise only as limits at either end. On nanoGPT, all three methods outperform existing lightweight deep connection schemes, and the best validation loss is attained at finite p, indicating that the exponential map is not the preferred retraction for spherical residual streams but merely one end of a spectrum.

Previous works that leverage video models for image-to-3D scene generation often suffer from geometric distortions and blurry content. Using video generation models to implicitly maintain geometric consistency according to a single-frame input is ineffective. In this paper, we present a two-stage method, named GeoWorld, that renovates the image-to-3D scene generation pipeline by providing full-frame geometry features. The first-stage video generation model, followed by a multi-view geometry model, produces full-frame geometry features, which are then used as a mental draft of geometric conditions to aid the second-stage video-generation model. A geometric loss is proposed to impose real-world geometric constraints, and a geometry adaptation module is introduced to ensure the effective utilization of geometry features. Thanks to full-frame geometric modeling, the two smaller video models in our two-stage method can generate higher-fidelity 3D scenes than SOTA methods, while being even faster, e.g. 7.5times faster than Hunyuan-Voyager. Project page: https://peaes.github.io/GeoWorld.

RTK-SLAM systems integrate simultaneous localization and mapping (SLAM) with real-time kinematic (RTK) GNSS positioning, promising both relative consistency and globally referenced coordinates for efficient georeferenced surveying. A critical and underappreciated issue is that the standard evaluation metric, Absolute Trajectory Error (ATE), first fits an optimal rigid-body transformation between the estimated trajectory and reference before computing errors. This so-called SE(3) alignment absorbs global drift and systematic errors, making trajectories appear more accurate than they are in practice, and is unsuitable for evaluating the global accuracy of RTK-SLAM. We present a geodetically referenced dataset and evaluation methodology that expose this gap. A key design principle is that the RTK receiver is used solely as a system input, while ground truth is established independently via a geodetic total station. This separation is absent from all existing datasets, where GNSS typically serves as (part of) the ground truth. The dataset is collected with a handheld RTK-SLAM device, comprising two scenes. We evaluate LiDAR-inertial, visual-inertial, and LiDAR-visual-inertial RTK-SLAM systems alongside standalone RTK, reporting direct global accuracy and SE(3)-aligned relative accuracy to make the gap explicit. Results show that SE(3) alignment can underestimate absolute positioning error by up to 76\%. RTK-SLAM achieves centimeter-level absolute accuracy in open-sky conditions and maintains decimeter-level global accuracy indoors, where standalone RTK degrades to tens of meters. The dataset, calibration files, and evaluation scripts are publicly available at https://rtk-slam-dataset.github.io/.

By interpreting the product of the Principal Component Analysis, that is the covariance matrix, as a sequence of nested subspaces naturally coming with weights according to the level of approximation they provide, we are able to embed all d--dimensional Grassmannians into a stratified space of covariance matrices. We observe that Grassmannians constitute the lowest dimensional skeleton of the stratification while it is possible to define a Riemaniann metric on the highest dimensional and dense stratum, such a metric being compatible with the global stratification. With such a Riemaniann metric at hand, it is possible to look for geodesics between two linear subspaces of different dimensions that do not go through higher dimensional linear subspaces as would euclidean geodesics. Building upon the proposed embedding of Grassmannians into the stratified space of covariance matrices, we generalize the concept of varifolds to what we call flagfolds in order to model multi-dimensional shapes.

We propose to study and promote the robustness of a model as per its performance through the interpolation of training data distributions. Specifically, (1) we augment the data by finding the worst-case Wasserstein barycenter on the geodesic connecting subpopulation distributions of different categories. (2) We regularize the model for smoother performance on the continuous geodesic path connecting subpopulation distributions. (3) Additionally, we provide a theoretical guarantee of robustness improvement and investigate how the geodesic location and the sample size contribute, respectively. Experimental validations of the proposed strategy on four datasets, including CIFAR-100 and ImageNet, establish the efficacy of our method, e.g., our method improves the baselines' certifiable robustness on CIFAR10 up to 7.7%, with 16.8% on empirical robustness on CIFAR-100. Our work provides a new perspective of model robustness through the lens of Wasserstein geodesic-based interpolation with a practical off-the-shelf strategy that can be combined with existing robust training methods.

Modeling 3D scene geometry and its evolution over time is essential for autonomous driving and robotics. A common paradigm is to use world models to predict future images or latent representations of the environment and subsequently recover geometry from these predictions. However, this paradigm does not explicitly model geometric structure and typically relies on recursive rollouts to reach longer prediction horizons, leading to error accumulation and increasing computational cost. To address these limitations, we present GeoWM, a geometry world model that directly forecasts future scene geometry at specified future horizons without recursive rollout. The key idea is to leverage a geometry foundation model to transform observed RGB frames into a geometric history, which conditions a flow-matching transformer to predict the scene geometry at a specified future horizon. We further show that a lightweight camera-motion predictor can accurately estimate the future viewpoint, and that projecting the observed geometry into the predicted viewpoint provides an effective geometric prior for future geometry forecasting. Extensive experiments on four datasets spanning urban driving, aerial flight, and dynamic manipulation demonstrate that GeoWM outperforms the evaluated world models in forecasting depth, camera pose, and 3D scene geometry, while substantially reducing inference time at longer horizons.

We study the problem of learning generative models for discrete sequences in a continuous embedding space. Whereas prior approaches typically operate in Euclidean space or on the probability simplex, we instead work on the sphere mathbb S^{d-1}. There the von Mises-Fisher (vMF) distribution induces a natural noise process and admits a closed-form conditional score. The conditional velocity is in general intractable. Exploiting the radial symmetry of the vMF density we reduce the continuity equation on mathbb S^{d-1} to a scalar ODE in the cosine similarity, whose unique bounded solution determines the velocity. The marginal velocity and marginal score on (mathbb S^{d-1})^L both decompose into posterior-weighted tangent sums that differ only by per-token scalar weights. This gives access to both ODE and predictor-corrector (PC) sampling. The posterior is the only learned object, trained by a cross-entropy loss. Experiments compare the vMF path against geodesic and Euclidean alternatives. The combination of vMF and PC sampling significantly improves results on Sudoku and language modeling.

Geometric foundation models, such as the Visual Geometry Grounded Transformer (VGGT), provide strong 3D priors from unposed images. However, such models operate purely in a feed-forward, deterministic regime, \ie~they cannot generate plausible geometry beyond what the input views directly support. Generative models for 3D scenes, on the other hand, must rely on strong geometric priors to produce coherent outputs from sparse inputs. We bridge these two paradigms by performing flow matching directly in VGGT's latent space, leveraging its learned 3D priors without committing to any explicit downstream representation such as Gaussians, meshes, or video-VAE latents. This requires respecting the latent geometry: VGGT tokens occupy a product of high-dimensional hyperspheres on which standard Euclidean flow matching fails. We address this with a Riemannian Flow Matching framework defined on a product manifold of four hyperspheres, aligned with VGGT's multi-scale encoder, which keeps generated tokens on the valid data manifold required by the frozen decoding heads. On RealEstate10K, ScanNet++ and ETH3D, our method achieves strong performance against recent scene generation baselines in both per-view appearance and aggregated 3D geometry, establishing latent-space flow matching on geometric foundation models as a viable paradigm for 3D generation. The project page can be found https://lisaweijler.github.io/geometry-grounded-rfm/{here}.

Geospatial foundation models (GeoFMs) offer transformative potential for environmental monitoring, yet adoption among ecologists is uneven. Most evaluations are model-centric, focusing on architecture and benchmark accuracy, which overlooks whether the systems are usable by their intended audiences. To address this gap, we first conducted a pilot expert elicitation survey with ecology and conservation scientists that helped us identify misalignments between current GeoFM development priorities and their needs. Informed by these findings and based on HCI theory, we created a seven-dimension evaluation covering Access & Deployment, Interaction & Customization, Trust & Transparency, Community & Support, Scientific Permanence, Multilingual Support, and Offline Usability. Then, two raters applied this rubric to 89 GeoFMs. We found distinct accessibility gaps where nearly a third provide no support to practitioners beyond their source code. Dimensions along which ratings were highly consistent function as field-level diagnostics, revealing where there is room for improvement for current GeoFMs.

Recent works have explored unifying SLAM with geometric foundation models (GFMs). However, directly using GFM predictions for tracking is highly sensitive to model capability and uncertainty, as geometric inaccuracies in the predictions can adversely affect pose estimation. To address this limitation, we present a decoupled framework that integrates classical feature-based SLAM with GFMs, which achieves higher quality and more consistent dense reconstruction. In brief, we use classical visual SLAM for robust low-latency tracking and use GFMs exclusively for mapping. By anchoring mapping to poses produced by the SLAM module and optimizing across depth scales, the proposed design avoids propagating inaccuracies from GFM predictions into pose estimation while imposing geometric constraints on the reconstruction. The system builds submaps from multiple posed keyframes and enforces scale consistency via lightweight frame and submap scale optimization. It also performs projection-based point cloud fusion within each submap, and updates submaps online to reflect trajectory updates from the feature-based SLAM. To evaluate tracking and reconstruction of our method, we introduce a loop-rich, building-scale indoor dataset with accurate sensor trajectories and LiDAR ground-truth. Experiments show that our approach achieves superior trajectory accuracy while improving reconstruction precision by 10%-20% over existing methods, with about 2 cm reconstruction error per 10 m chunk on building-scale dataset. On large-scale outdoor datasets, it attains 10 cm error per 30 m chunk (w.r.t LiDAR ground-truth models). Code and dataset: https://github.com/ori-drs/ScaRF-SLAM

Human motion generation is often learned in Euclidean spaces, although valid motions follow structured non-Euclidean geometry. We present Riemannian Motion Generation (RMG), a unified framework that represents motion on a product manifold and learns dynamics via Riemannian flow matching. RMG factorizes motion into several manifold factors, yielding a scale-free representation with intrinsic normalization, and uses geodesic interpolation, tangent-space supervision, and manifold-preserving ODE integration for training and sampling. On HumanML3D, RMG achieves state-of-the-art FID in the HumanML3D format (0.043) and ranks first on all reported metrics under the MotionStreamer format. On MotionMillion, it also surpasses strong baselines (FID 5.6, R@1 0.86). Ablations show that the compact T+R (translation + rotations) representation is the most stable and effective, highlighting geometry-aware modeling as a practical and scalable route to high-fidelity motion generation.

Generating a street-level 3D scene from a single satellite image is a crucial yet challenging task. Current methods present a stark trade-off: geometry-colorization models achieve high geometric fidelity but are typically building-focused and lack semantic diversity. In contrast, proxy-based models use feed-forward image-to-3D frameworks to generate holistic scenes by jointly learning geometry and texture, a process that yields rich content but coarse and unstable geometry. We attribute these geometric failures to the extreme viewpoint gap and sparse, inconsistent supervision inherent in satellite-to-street data. We introduce Sat3DGen to address these fundamental challenges, which embodies a geometry-first methodology. This methodology enhances the feed-forward paradigm by integrating novel geometric constraints with a perspective-view training strategy, explicitly countering the primary sources of geometric error. This geometry-centric strategy yields a dramatic leap in both 3D accuracy and photorealism. For validation, we first constructed a new benchmark by pairing the VIGOR-OOD test set with high-resolution DSM data. On this benchmark, our method improves geometric RMSE from 6.76m to 5.20m. Crucially, this geometric leap also boosts photorealism, reducing the Fréchet Inception Distance (FID) from sim40 to 19 against the leading method, Sat2Density++, despite using no extra tailored image-quality modules. We demonstrate the versatility of our high-quality 3D assets through diverse downstream applications, including semantic-map-to-3D synthesis, multi-camera video generation, large-scale meshing, and unsupervised single-image Digital Surface Model (DSM) estimation. The code has been released on https://github.com/qianmingduowan/Sat3DGen.

We introduce a principled way of computing the Wasserstein distance between two distributions in a federated manner. Namely, we show how to estimate the Wasserstein distance between two samples stored and kept on different devices/clients whilst a central entity/server orchestrates the computations (again, without having access to the samples). To achieve this feat, we take advantage of the geometric properties of the Wasserstein distance -- in particular, the triangle inequality -- and that of the associated {\em geodesics}: our algorithm, FedWad (for Federated Wasserstein Distance), iteratively approximates the Wasserstein distance by manipulating and exchanging distributions from the space of geodesics in lieu of the input samples. In addition to establishing the convergence properties of FedWad, we provide empirical results on federated coresets and federate optimal transport dataset distance, that we respectively exploit for building a novel federated model and for boosting performance of popular federated learning algorithms.

Large-scale land enclosure for speculative mega-development constitutes a non-equilibrium spatial process whose velocity, topology, and irreversibility remain poorly quantified. We study the Pantai Indah Kapuk 2 (PIK2) coastal mega-development north of Jakarta, Indonesia, using eight years (2017--2024) of Sentinel-2 land-use/land-cover (LULC) data at 10-meter resolution. The landscape is projected onto a Marxian probability simplex partitioning terrestrial pixels into Commons, Agrarian, and Capital fractions. Fisher-Rao (FR) geodesic distances on this simplex identify a transformation pulse of 0.405~rad/yr during 2019--2020, coinciding with major construction activity. Absorbing Markov chain analysis yields expected absorption times into the built environment of 46.0~years for cropland and 38.1~years for tree cover, with a pooled built-area self-retention rate of 96.4%. Percolation analysis reveals that a giant connected component containing 89--95% of all built pixels persists at occupation probabilities p in [0.096, 0.162], far below the random percolation threshold p_c approx 0.593, indicating planned rather than stochastic spatial growth. The box-counting fractal dimension of the urban boundary increases from d_f = 1.316 to 1.397, consistent with increasingly irregular frontier expansion. These results suggest that information-geometric and statistical-mechanical tools can characterize the kinematic and topological signatures of capitalist spatial accumulation with quantitative precision.

This paper develops a hierarchical clustering algorithm for weighted projective spaces P_{q}, utilizing a Finsler metric d_F([z], [w]) and its rational analogue d_{F,Q}([z], [w]) to define distances that preserve the non-Euclidean geometry of these quotient manifolds. Defined via geodesic integrals of a scaling invariant Finsler norm weighted by the grades q = (q_0, q_1, dots, q_n), these metrics satisfy true metric properties including the triangle inequality, overcoming the limitations of the non-metric dissimilarity measure from prior work.

Geometric analysis fundamentally distinguishes between extrinsic and intrinsic perspectives. The dominant paradigm in current 3D representation learning relies on either extrinsic spatial structures or high-level semantics, struggling to capture the essence of shape identity and underlying manifold topology. To bridge this gap, we introduce a novel 3D representation learning paradigm, namely PRISM, for Pre-training, which learns isometric embeddings by Recovering the Intrinsic Surface geodesic Metric. PRISM incorporates a topology-enforcing objective that explicitly constrains the structure of latent space, alongside a specialized two-stage training recipe mitigating sample imbalance inherent in the distribution of geodesic distances. Experiments demonstrate that our approach shows satisfactory accuracy, robustness, and high efficiency in geodesic distance prediction and achieves superior performance across diverse downstream tasks, including shape recognition, surface parameterization, and non-rigid correspondence. The code will be publicly available at https://github.com/AidenZhao/PRISM.

Many dynamical processes unfold on the sphere but the default scientific machine learning architectures are Euclidean. Applying these architectures on a regular lat-lon grid causes problems: Cartesian convolutions become distorted at high latitude; 2D FFTs in Fourier neural operators incorrectly assume double periodicity; Cartesian positional encodings in ViTs distort spherical geodesic distances. Recent work moves towards natively spherical primitives, including spherical convolutions (e.g., DeepSphere or DISCO), Spherical Fourier Neural Operators (SFNOs), and geodesic attention. Here we propose Dandelion, a spherical version of Flower, a warp-based neural PDE solver. Layers of Dandelion predict a tangent-plane displacement and transport features along great circles. We obtain a U-Net-like structure by implementing hierarchical pooling entirely in the spherical-harmonic domain. There are thus no convolutions: spatial mixing is achieved only through spherical coordinate changes, or warps. To compare Dandelion with existing spherical architectures, we release an evolving benchmark suite of challenging, natively-spherical PDE datasets including a modified Galewsky jet, anomalous chained turbulence, Cahn-Hilliard decomposition, spherical Riemann shocks, Held-Suarez dry atmospheric transport and global ocean dynamics. This new benchmark fills the gap in existing spherical datasets which are either too small and stylized, or much too large (ERA5) for model iteration. Dandelion is best or second-best on every dataset, and the gap to non-warp baselines widens with resolution: at 256times 512, Dandelion and Flower2D occupy the top two slots in both single-step prediction and rollout.

Geolocating images of a ground-level scene entails estimating the location on Earth where the picture was taken, in absence of GPS or other location metadata. Typically, methods are evaluated by measuring the Great Circle Distance (GCD) between a predicted location and ground truth. However, this measurement is limited because it only evaluates a single point, not estimates of regions or score heatmaps. This is especially important in applications to rural, wilderness and under-sampled areas, where finding the exact location may not be possible, and when used in aggregate systems that progressively narrow down locations. In this paper, we introduce a novel metric, Recall vs Area (RvA), which measures the accuracy of estimated distributions of locations. RvA treats image geolocation results similarly to document retrieval, measuring recall as a function of area: For a ranked list of (possibly non-contiguous) predicted regions, we measure the accumulated area required for the region to contain the ground truth coordinate. This produces a curve similar to a precision-recall curve, where "precision" is replaced by square kilometers area, allowing evaluation of performance for different downstream search area budgets. Following directly from this view of the problem, we then examine a simple ensembling approach to global-scale image geolocation, which incorporates information from multiple sources to help address domain shift, and can readily incorporate multiple models, attribute predictors, and data sources. We study its effectiveness by combining the geolocation models GeoEstimation and the current SOTA GeoCLIP, with attribute predictors based on ORNL LandScan and ESA-CCI Land Cover. We find significant improvements in image geolocation for areas that are under-represented in the training set, particularly non-urban areas, on both Im2GPS3k and Street View images.

We present GeoGrid-Bench, a benchmark designed to evaluate the ability of foundation models to understand geo-spatial data in the grid structure. Geo-spatial datasets pose distinct challenges due to their dense numerical values, strong spatial and temporal dependencies, and unique multimodal representations including tabular data, heatmaps, and geographic visualizations. To assess how foundation models can support scientific research in this domain, GeoGrid-Bench features large-scale, real-world data covering 16 climate variables across 150 locations and extended time frames. The benchmark includes approximately 3,200 question-answer pairs, systematically generated from 8 domain expert-curated templates to reflect practical tasks encountered by human scientists. These range from basic queries at a single location and time to complex spatiotemporal comparisons across regions and periods. Our evaluation reveals that vision-language models perform best overall, and we provide a fine-grained analysis of the strengths and limitations of different foundation models in different geo-spatial tasks. This benchmark offers clearer insights into how foundation models can be effectively applied to geo-spatial data analysis and used to support scientific research.

Cross-view geo-localization in GNSS-denied environments aims to determine an unknown location by matching drone-view images with the correct geo-tagged satellite-view images from a large gallery. Recent research shows that learning discriminative image representations under specific weather conditions can significantly enhance performance. However, the frequent occurrence of unseen extreme weather conditions hinders progress. This paper introduces MCGF, a Multi-weather Cross-view Geo-localization Framework designed to dynamically adapt to unseen weather conditions. MCGF establishes a joint optimization between image restoration and geo-localization using denoising diffusion models. For image restoration, MCGF incorporates a shared encoder and a lightweight restoration module to help the backbone eliminate weather-specific information. For geo-localization, MCGF uses EVA-02 as a backbone for feature extraction, with cross-entropy loss for training and cosine distance for testing. Extensive experiments on University160k-WX demonstrate that MCGF achieves competitive results for geo-localization in varying weather conditions.

In this paper we demonstrate how sub-Riemannian geometry can be used for manifold learning and surface reconstruction by combining local linear approximations of a point cloud to obtain lower dimensional bundles. Local approximations obtained by local PCAs are collected into a rank k tangent subbundle on R^d, k<d, which we call a principal subbundle. This determines a sub-Riemannian metric on R^d. We show that sub-Riemannian geodesics with respect to this metric can successfully be applied to a number of important problems, such as: explicit construction of an approximating submanifold M, construction of a representation of the point-cloud in R^k, and computation of distances between observations, taking the learned geometry into account. The reconstruction is guaranteed to equal the true submanifold in the limit case where tangent spaces are estimated exactly. Via simulations, we show that the framework is robust when applied to noisy data. Furthermore, the framework generalizes to observations on an a priori known Riemannian manifold.

Modern feed-forward 3D reconstruction methods like VGGT predict pixel-aligned pointmaps in camera-centric coordinate frames. However, this choice of coordinate frame is not always optimal. We propose instead to predict pointmaps in upright, gravity-aligned frames that exploit strong structural cues present in many real-world scenes. Unlike camera-centric frames, gravity-aligned frames share a common vertical axis across viewpoints, reducing the rotational degrees of freedom needed to relate pointmaps to one another. To this end, we introduce the Gravity Grounded Geometry Transformer (G3T), fine-tuned from existing models on gravity-aligned 3D data. G3T produces highly accurate gravity-aware predictions, including upright pointmaps and camera-to-gravity poses. We further introduce G3T-Long, a submap-based incremental 3D reconstruction pipeline that leverages the reduced rotational degrees of freedom afforded by upright frames to achieve significantly improved reconstruction accuracy.

We construct a geometric framework for cosmological large-scale structure based on optimal transport theory and Wasserstein geometry. In this framework, Ricci curvature on the probability measure space P_2(M) is characterized by the geodesic convexity of entropy and is formulated as the response of probability distributions to optimal transport. We introduce effective Ricci curvatures K_{eff}^{(infty)} and K_{eff}^{(N)} associated with Kullback--Leibler-type and Rényi-type entropies, corresponding respectively to the curvature-dimension conditions CD(K,infty) and CD(K,N). By localizing these curvatures to finite scales using local and reference measures, we construct curvature indicators applicable to observational data. Under a local quadratic approximation, the effective curvature reduces to the Hessian of the log-density, showing that conventional Hessian-based structure classifications arise as a limiting case of the present framework. We further show that effective curvature depends on observational scale and formulate this dependence as a scale flow, distinct from Ricci flow because it describes a change of resolution rather than a time evolution of geometry. Treating curvature as a random field then extends the statistical description of density fields: curvature statistics are given by higher-order weighted integrals of the power spectrum and by spatial derivatives of the correlation function, emphasizing geometric rather than amplitude information. This framework provides a unified connection between optimal transport geometry and cosmological structure analysis, and offers a new perspective on multiscale structure and nonlinear statistics.

Recent 3D world models increasingly use features from geometry foundation models (GFMs) as predictive world states, benefiting from their rich geometric priors. However, the view dependence of these features entangles scene dynamics with camera-induced variation, making the resulting state evolution harder to predict. We propose GeoState, a view-decoupled geometry representation for predictive 3D world modeling that separates scene-state evolution from camera-dependent observation. Specifically, a scene tokenizer aggregates multi-view GFM features into a view-decoupled scene state, which a geometry decoder queries using camera rays. An autoregressive world model then predicts future scene states, while camera motion is modeled separately. The predicted states can therefore be decoded under either predicted or externally specified cameras, while retaining a single context-derived scale throughout the rollout without per-frame scale alignment. Experiments show that GeoState outperforms prior 3D world models on Waymo, supports geometrically consistent cross-view querying, and generalizes zero-shot to KITTI and nuScenes. Project page: https://hongchang-liu.github.io/GeoState-project-page/

Geospatial Foundation Models (GeoFMs) are transforming Earth Observation (EO), but evaluation lacks standardized protocols. GEO-Bench-2 addresses this with a comprehensive framework spanning classification, segmentation, regression, object detection, and instance segmentation across 19 permissively-licensed datasets. We introduce ''capability'' groups to rank models on datasets that share common characteristics (e.g., resolution, bands, temporality). This enables users to identify which models excel in each capability and determine which areas need improvement in future work. To support both fair comparison and methodological innovation, we define a prescriptive yet flexible evaluation protocol. This not only ensures consistency in benchmarking but also facilitates research into model adaptation strategies, a key and open challenge in advancing GeoFMs for downstream tasks. Our experiments show that no single model dominates across all tasks, confirming the specificity of the choices made during architecture design and pretraining. While models pretrained on natural images (ConvNext ImageNet, DINO V3) excel on high-resolution tasks, EO-specific models (TerraMind, Prithvi, and Clay) outperform them on multispectral applications such as agriculture and disaster response. These findings demonstrate that optimal model choice depends on task requirements, data modalities, and constraints. This shows that the goal of a single GeoFM model that performs well across all tasks remains open for future research. GEO-Bench-2 enables informed, reproducible GeoFM evaluation tailored to specific use cases. Code, data, and leaderboard for GEO-Bench-2 are publicly released under a permissive license.

The ability to estimate pose and generate maps using 3D LiDAR significantly enhances robotic system autonomy. However, existing open-source datasets lack representation of geometrically degenerate environments, limiting the development and benchmarking of robust LiDAR SLAM algorithms. To address this gap, we introduce GEODE, a comprehensive multi-LiDAR, multi-scenario dataset specifically designed to include real-world geometrically degenerate environments. GEODE comprises 64 trajectories spanning over 64 kilometers across seven diverse settings with varying degrees of degeneracy. The data was meticulously collected to promote the development of versatile algorithms by incorporating various LiDAR sensors, stereo cameras, IMUs, and diverse motion conditions. We evaluate state-of-the-art SLAM approaches using the GEODE dataset to highlight current limitations in LiDAR SLAM techniques. This extensive dataset will be publicly available at https://geode.github.io, supporting further advancements in LiDAR-based SLAM.

We introduce M2DGR: a novel large-scale dataset collected by a ground robot with a full sensor-suite including six fish-eye and one sky-pointing RGB cameras, an infrared camera, an event camera, a Visual-Inertial Sensor (VI-sensor), an inertial measurement unit (IMU), a LiDAR, a consumer-grade Global Navigation Satellite System (GNSS) receiver and a GNSS-IMU navigation system with real-time kinematic (RTK) signals. All those sensors were well-calibrated and synchronized, and their data were recorded simultaneously. The ground truth trajectories were obtained by the motion capture device, a laser 3D tracker, and an RTK receiver. The dataset comprises 36 sequences (about 1TB) captured in diverse scenarios including both indoor and outdoor environments. We evaluate state-of-the-art SLAM algorithms on M2DGR. Results show that existing solutions perform poorly in some scenarios. For the benefit of the research community, we make the dataset and tools public. The webpage of our project is https://github.com/SJTU-ViSYS/M2DGR.

Monocular and RGB-D visual-inertial SLAM systems remain susceptible to limited field of view, sensor-specific failure modes, and unreliable cross-session relocalization. To address these issues, we present GeoFlow-SLAM++, a tightly coupled multi-camera visual-inertial SLAM system that extends GeoFlow-SLAM from a single RGB-D sensor to a calibrated multi-camera rig with a unified body-centric formulation. Within this multi-camera framework, GeoFlow-SLAM++ supports two interchangeable visual front-ends: a conventional ORB front-end and a neural network feature (NN-Feature) front-end built on SuperPoint and LightGlue. The system unifies tracking, mapping, and relocalization on a shared body state, and combines multi-camera reprojection constraints, IMU pre-integration, cross-view place recognition, and dual-stream optical flow/NN-Feature tracking for robust localization. As an optional extension, the system can further incorporate cross-view-consistent pseudo-depth predictions from RGB images as auxiliary geometric constraints. We evaluate GeoFlow-SLAM++ on EuRoC, OpenLORIS, TUM, Hilti, and a self-collected handheld multi-camera dataset. Results show that the NN-Feature front-end improves robustness in appearance-challenging scenarios, the multi-camera formulation achieves competitive localization accuracy on Hilti, and the unified cross-view relocalization design reaches LiDAR-comparable performance on the handheld dataset.

We present Wid3R, a feed-forward neural network for visual geometry reconstruction that supports wide field-of-view camera models. Prior methods typically assume that input images are rectified or captured with pinhole cameras, since both their architectures and training datasets are tailored to perspective images only. These assumptions limit their applicability in real-world scenarios that use fisheye or panoramic cameras and often require careful calibration and undistortion. In contrast, Wid3R is a generalizable multi-view 3D estimation method that can model wide field-of-view camera types. Our approach leverages a ray representation with spherical harmonics and a novel camera model token within the network, enabling distortion-aware 3D reconstruction. Furthermore, Wid3R is the first multi-view foundation model to support feed-forward 3D reconstruction directly from 360 imagery. It demonstrates strong zero-shot robustness and consistently outperforms prior methods, achieving improvements of up to +77.33 on Stanford2D3D.

Recent advances in multimodal foundation models, exemplified by GPT-6 Astra, raise the prospect of general-purpose embodied reasoning and planning. Using Internet videos for embodied pretraining calls for reliable physical-scale annotations. Yet visual geometry foundation models often recover scene structure and camera motion without reliable metric scale. We show that uncertain size priors of familiar objects can jointly constrain a reconstruction's shared scale. Building on this insight, we present UniMetric, a universal and training-free metric scale recovery framework for geometry foundation models, without additional sensors or task-specific metric supervision. Specifically, Metric Prior Acquisition elicits object height intervals from a vision-language model. Semantic-Geometric Alignment measures reconstructed object heights along the estimated support-surface normal in each frame and converts the priors into scale intervals. Global Scale Recovery reconciles these intervals through a convex objective, yielding a jointly feasible scale when they overlap and a unique compromise otherwise. The estimated sequence-level scale is applied uniformly to reconstructed points and camera translations. Controlled experiments with real VLM priors show that combining observations improves scale accuracy with exact relative object heights. To evaluate metric accuracy on GFM reconstructions without ground-truth scale alignment, we introduce MetricBench, covering twelve embodied, driving, and roadside subsets with sensor-derived ground truth. Across nine geometry foundation models, UniMetric reduces mean depth Abs Rel, reconstruction Chamfer distance, and trajectory error by 54.2%, 83.8%, and 65.6%, respectively, improving every model on all three tasks at the suite level. We release the UniMetric code and MetricBench data.

We study the relation between equal-weight circle quadrature, Gauss--Chebyshev quadrature, and planar Minkowski reconstruction. The regular N-point grid is an mathbb S^1-design of strength N-1; a half-step rotation of the 2M-point grid projects to the classical M-point Gauss--Chebyshev rule. A common family of quadrature-error functionals gives exact identities for integration error, mixed-area error, and support-function error. For Nge3, the centered Minkowski polygon P_N with perimeter 2π has the exact Hausdorff distance from the unit disk B^2 \[ d_H(P_N,B^2)=1-\fracπ{N}\cot\fracπ{N} =π^2{3N^2}+O(N^{-4}). \] With Steiner centering, we obtain d_H(K_μ,K_ν)leπW_1(μ,ν) for balanced, nondegenerate probability measures, where W_1 uses geodesic distance. Its exponent is sharp even for smooth positive densities near the uniform measure. The identity W_1(ν_N,σ)=π/(2N) yields a general O(N^{-1}) bound for the regular grid. The sharper O(N^{-2}) rate follows from the sparse discrepancy spectrum and the inverse multiplier (1-k^2)^{-1}. Finally, a perturbation estimate gives sufficient conditions for preserving the quadratic rate and its leading constant.

We present two new classes of algorithms for efficient field integration on graphs encoding point clouds. The first class, SeparatorFactorization(SF), leverages the bounded genus of point cloud mesh graphs, while the second class, RFDiffusion(RFD), uses popular epsilon-nearest-neighbor graph representations for point clouds. Both can be viewed as providing the functionality of Fast Multipole Methods (FMMs), which have had a tremendous impact on efficient integration, but for non-Euclidean spaces. We focus on geometries induced by distributions of walk lengths between points (e.g., shortest-path distance). We provide an extensive theoretical analysis of our algorithms, obtaining new results in structural graph theory as a byproduct. We also perform exhaustive empirical evaluation, including on-surface interpolation for rigid and deformable objects (particularly for mesh-dynamics modeling), Wasserstein distance computations for point clouds, and the Gromov-Wasserstein variant.

SLAM methods based on 3D Gaussian Splatting (3DGS) have demonstrated impressive tracking and mapping performance, but typically require additional geometric information from external depth sensors. Meanwhile, recent SLAM systems that leverage geometric priors from pre-trained feed-forward models enable real-time dense reconstruction, yet often discard original RGB information during optimization, thus degrading overall reconstruction quality. We present GeoGS-SLAM, an online monocular dense reconstruction system that combines the 3DGS-based map representation with learned geometric priors. Given uncalibrated RGB input, we first employ a feed-forward visual geometry model to predict camera and scene priors. The Gaussian scene map is then expanded by directly sampling Gaussian primitives from both RGB input and geometric priors. Camera poses and the scene map are jointly optimized through a coarse-to-fine strategy that minimizes both photometric and geometric losses. To ensure global consistency, we further incorporate online loop closure detection and pose graph optimization. Extensive experiments across indoor and outdoor benchmarks demonstrate that GeoGS-SLAM achieves superior rendering quality and tracking accuracy compared to state-of-the-art methods while maintaining online real-time performance. Project page: https://rlgao.github.io/geogs_slam.

Generative models have shown great promise in generating 3D geometric systems, which is a fundamental problem in many natural science domains such as molecule and protein design. However, existing approaches only operate on static structures, neglecting the fact that physical systems are always dynamic in nature. In this work, we propose geometric trajectory diffusion models (GeoTDM), the first diffusion model for modeling the temporal distribution of 3D geometric trajectories. Modeling such distribution is challenging as it requires capturing both the complex spatial interactions with physical symmetries and temporal correspondence encapsulated in the dynamics. We theoretically justify that diffusion models with equivariant temporal kernels can lead to density with desired symmetry, and develop a novel transition kernel leveraging SE(3)-equivariant spatial convolution and temporal attention. Furthermore, to induce an expressive trajectory distribution for conditional generation, we introduce a generalized learnable geometric prior into the forward diffusion process to enhance temporal conditioning. We conduct extensive experiments on both unconditional and conditional generation in various scenarios, including physical simulation, molecular dynamics, and pedestrian motion. Empirical results on a wide suite of metrics demonstrate that GeoTDM can generate realistic geometric trajectories with significantly higher quality.

Respiratory motion complicates accurate irradiation of thoraco-abdominal tumors during radiotherapy, as treatment-system latency entails target-location uncertainties. This work addresses frame forecasting in chest and liver cine MRI to compensate for such delays. We investigate RNNs trained with online learning algorithms, enabling adaptation to changing respiratory patterns via on-the-fly parameter updates, and transformers, increasingly common in time-series forecasting for their ability to capture long-term dependencies. Experiments used 12 sagittal thoracic and upper-abdominal cine-MRI sequences from ETH Zürich and OvGU; the OvGU data exhibited higher motion variability, noise, and lower contrast. PCA decomposes the Lucas-Kanade optical-flow field into static deformation modes and low-dimensional, time-dependent weights. We compare various methods for forecasting these weights: linear filters, population and sequence-specific transformer encoders, and RNNs trained with real-time recurrent learning (RTRL), unbiased online recurrent optimization, decoupled neural interfaces, and sparse one-step approximation (SnAp-1). Predicted displacements were used to warp the reference frame and generate future images. Prediction accuracy decreased with the horizon h. Linear regression performed best at short horizons (1.3mm geometrical error at h=0.32s, ETH Zürich dataset), while RTRL and SnAp-1 outperformed the other algorithms at medium-to-long horizons, with geometrical errors below 1.4mm and 2.8mm on the sequences from ETH Zürich and OvGU, respectively. The sequence-specific transformer was competitive for low-to-medium horizons, but transformers remained overall limited by data scarcity and domain shift between datasets. Predicted frames visually resembled the ground truth, with notable errors occurring near the diaphragm at end-inspiration and regions affected by out-of-plane motion.

Planetary exploration using aerial assets has the potential for unprecedented scientific discoveries on Mars. While NASA's Mars helicopter Ingenuity proved flight in Martian atmosphere is possible, future Mars rotorcraft will require advanced navigation capabilities for long-range flights. One such critical capability is Map-based Localization (MbL) which registers an onboard image to a reference map during flight to mitigate cumulative drift from visual odometry. However, significant illumination differences between rotorcraft observations and a reference map prove challenging for traditional MbL systems, restricting the operational window of the vehicle. In this work, we investigate a new MbL system and propose Geo-LoFTR, a geometry-aided deep learning model for image registration that is more robust under large illumination differences than prior models. The system is supported by a custom simulation framework that uses real orbital maps to produce large amounts of realistic images of the Martian terrain. Comprehensive evaluations show that our proposed system outperforms prior MbL efforts in terms of localization accuracy under significant lighting and scale variations. Furthermore, we demonstrate the validity of our approach across a simulated Martian day and on real Mars imagery. Code and datasets are available at: https://dpisanti.github.io/geo-loftr/.

We present a novel method for recovering world-grounded human motion from monocular video. The main challenge lies in the ambiguity of defining the world coordinate system, which varies between sequences. Previous approaches attempt to alleviate this issue by predicting relative motion in an autoregressive manner, but are prone to accumulating errors. Instead, we propose estimating human poses in a novel Gravity-View (GV) coordinate system, which is defined by the world gravity and the camera view direction. The proposed GV system is naturally gravity-aligned and uniquely defined for each video frame, largely reducing the ambiguity of learning image-pose mapping. The estimated poses can be transformed back to the world coordinate system using camera rotations, forming a global motion sequence. Additionally, the per-frame estimation avoids error accumulation in the autoregressive methods. Experiments on in-the-wild benchmarks demonstrate that our method recovers more realistic motion in both the camera space and world-grounded settings, outperforming state-of-the-art methods in both accuracy and speed. The code is available at https://zju3dv.github.io/gvhmr/.

In urban low-altitude flight, buildings reshape ambient wind into spatially varying 3D flow, making unmanned aerial vehicle (UAV) energy depend on local wind exposure as well as path length. However, building-resolved wind information is rarely available when a mission must be planned. Computational fluid dynamics (CFD) can produce high-fidelity urban flow fields, but each simulation is tied to a fixed inflow boundary condition and can take hours to days, which is incompatible with urban UAV missions that typically last minutes to tens of minutes. We present GeoWind2Plan, a geometry-to-wind-to-planning framework for mission-time 3D urban wind prediction and energy-efficient UAV planning. Given only a background wind vector, 3D building geometry, and a start-goal pair, GeoWind2Plan transforms the building geometry into a reference-wind frame, predicts mission-relevant 3D wind patches with a localized geometry-conditioned neural operator, stitches them into a queryable local wind field, and optimizes a feasible 3D path and speed profile using a physically grounded UAV energy model. Rather than pursuing CFD-perfect reconstruction, GeoWind2Plan targets decision-useful wind prediction: trajectories are planned with predicted wind and evaluated under high-fidelity CFD wind. Across held-out urban domains, wind speeds, and mission wind-angle regimes, GeoWind2Plan performs corridor-localized wind inference in about 3 seconds, compared with roughly 8 hours for CFD. Under CFD evaluation, trajectories planned with GeoWind2Plan reduce energy by 6.9%, 12.7%, and 4.5% in tailwind, headwind, and crosswind missions relative to wind-agnostic planning, recovering 87.9%, 85.7%, and 75.0% of CFD-reference savings. These results show that fast, corridor-localized 3D urban wind prediction can make wind-aware UAV energy planning practical at mission time.

Geospatial foundation models (GFMs) have been proposed as generalizable backbones for disaster response, land-cover mapping, food-security monitoring, and other high-stakes Earth-observation tasks. Yet the published work about these models does not give reviewers or users enough information to tell which model fits a given task. We argue that nobody knows what the current state of the art is in geospatial foundation models. The methods may be useful, but the GFM literature does not standardize evaluations, training and testing protocols, released weights, or pretraining controls well enough for anyone to compare or rank them. In a 152-paper audit, we find 46 cross-paper disagreements of at least 10 points for the same model, benchmark, and protocol; 94/126 papers with extractable pretraining data use a configuration no other paper uses; and 39% of GFM papers release no model weights. This lack of community standards can be solved. We propose six concrete expectations: named-license weight release, shared core evaluations, copied-versus-rerun baseline annotations, variance reporting, one shared evaluation harness, and data-vs-architecture-vs-algorithm controls. These gaps are a coordination failure, not a fault of any individual lab; the authors of this paper, like many others in the GFM community, have contributed to them. Rather than just critiquing the community, we aim to provide concrete steps toward a shared understanding of how to innovate GFMs.

In this paper we study the behavior of geodesics on cones over arbitrary C^3-smooth closed Riemannian manifolds. We show that the geodesic flow on such cones admits first integrals whose values uniquely determine almost all geodesics except for cone generatrices. This investigation is inspired by our results on billiards inside cones over manifolds where similar results hold true.

Anatomy-aware colonoscopic navigation requires localizing partial endoscopic observations on a stable 3D reference to support coverage assessment, revisited-region awareness, and CT-guided navigation. However, rigid point cloud registration in the colon differs fundamentally from standard benchmarks: surfaces are locally homogeneous, haustral folds are repetitive, views are highly partial, and reconstructed depth is noisy. We present C3VDReg, a dataset and benchmark derived from the Colonoscopy 3D Video Dataset (C3VD). For each frame, C3VDReg generates source point clouds via depth reprojection and target point clouds by raycasting CT meshes from matched camera poses. The benchmark comprises 10,015 viewpoint-matched partial-to-partial point cloud pairs (including 2,088 held-out test pairs) and evaluates baseline models under a standardized protocol: 8,192 points per cloud, source-only perturbations, fixed pose conventions, and unified metrics. Crucially, C3VDReg enables a systematic investigation of failure modes. We find that high geometric overlap alone is insufficient for reliable pose recovery: despite 74.3-93.1% ground-truth overlap, registration recall remains low across all evaluated methods. Through overlap, pose error, and translation decomposition analyses, we identify translation ambiguity along repetitive tubular anatomy as the primary bottleneck. This challenges the common assumption that increasing overlap or correspondence quality guarantees accurate registration, highlighting the need for stronger anatomical and contextual constraints. Code, model checkpoints, and data are available at https://github.com/linzhe001/C3VDReg .

Frequency response function (FRF) measurements are widely used in Gravitational Wave (GW) detectors, e.g., for the design of controllers, calibrating signals and diagnostic problems with system dynamics. The aim of this paper is to present GraFIT: a toolbox that enables fast, inexpensive, and accurate identification of FRF measurements for GW detectors compared to the commonly used approaches, including common spectral analysis techniques. The toolbox consists of a single function to estimate the frequency response function for both open-loop and closed-loop systems and for arbitrary input and output dimensions. The toolbox is validated on two experimental case studies of the Virgo detector, illustrating more than a factor 3 reduction in standard deviation of the estimate for the same measurement times, and comparable standard deviations with up to 10 times less data for the new method with respect to the currently implemented Spectral Analysis method.

Learning reliable surrogates for geodynamic models requires benchmarks that resolve coupled fields and temporal stability. We present GeoSim, a benchmark of high-resolution two-dimensional mantle-plume simulations generated with I2VIS, comprising 237 trajectories across two parameter regimes, with six coupled fields, physical timestamps, and trajectory-level splits. GeoSim defines short-window prediction and autonomous rollout, and evaluates representative neural operators field by field. Across models, we observe a pronounced scalar--velocity gap: scalar fields are reconstructed accurately while velocity errors remain large, and short-window accuracy does not imply stable rollout. We also evaluate MFGNO (Multi-Field Graph Neural Operator), a joint multi-field graph baseline designed for this benchmark; on GeoSim-Plume1, under a fixed per-field objective, it reduces horizontal and vertical velocity errors by 58.4% and 38.5% relative to an independent-field graph baseline, while an explicit field-difference input shows no measurable benefit at this scale. GeoSim provides a reproducible benchmark for field-wise diagnosis and long-horizon evaluation of geodynamic surrogates.

Multimodal Large Language Models (MLLMs) excel at 2D semantic understanding but lack intrinsic 3D awareness, resulting in representations that fail to maintain geometric and spatial consistency across video frames. Given the scarcity of large-scale 3D data, we present GeoVR, a novel framework that learns geometric representations using purely 2D video sequences. This approach effectively restructures the semantic latent space within MLLMs to unlock spatial intelligence. Rather than employing superficial feature mixing, GeoVR reshapes the internal representations of the MLLM by distilling geometry knowledge from pre-trained 3D foundation models. This is accomplished through a multi-objective learning strategy driven by four complementary geometric targets: (1) estimating inter-frame camera poses to embed varying viewpoint dynamics, (2) regressing dense depth maps to anchor physical distances, (3) predicting a metric scale factor for real-world calibration, and (4) distilling multi-scale 3D features to align the intermediate feature space. Guided by these explicit physical and geometric constraints, the model's internal representations naturally develop strong 3D awareness. Extensive experiments on spatial reasoning benchmarks demonstrate that GeoVR achieves state-of-the-art performance, establishing a new paradigm for endowing foundation models with spatial intelligence.

Latent flow matching for image generation usually transports Gaussian noise to variational autoencoder latents along linear paths. Both endpoints, however, concentrate in thin spherical shells, and a Euclidean chord leaves those shells even when preprocessing aligns their radii. By decomposing each latent token into radial and angular components, we show through component-swap probes that decoded perceptual and semantic content is carried predominantly by direction, with radius contributing much less. We therefore project data latents onto a fixed token radius, use the radial projection of Gaussian noise as the spherical prior, finetune the decoder with the encoder frozen, and replace linear interpolation with spherical linear interpolation. The resulting geodesic paths stay on the sphere at every timestep, and their velocity targets are purely angular by construction. Under matched training, the method consistently improves class-conditional ImageNet-256 FID across different image tokenizers, leaves the diffusion architecture unchanged, and requires no auxiliary encoder or representation-alignment objective.

World foundation models (WFMs) are powerful simulators, yet they predominantly operate in a single-view setting and lack the multi-view 3D consistency required for robotic manipulation. While robotic systems rely on multiple cameras (egocentric, eye-to-hand, and wrist-mounted) for policy learning, current multi-view world models simply concatenate view tokens without explicit geometric reasoning. This causes cross-view object drift, depth inconsistency, and texture misalignment. We trace these failures to two deficiencies: the absence of an explicit inter-view communication mechanism and the lack of a 3D geometric prior. We argue that resolving both simultaneously is necessary and sufficient. To address this, we present PAIWorld, a framework that augments diffusion-transformer world models via three core components: (1) Geometry-Aware Cross-View Attention blocks that establish an explicit pathway across views, (2) Geometric Rotary Position Embedding that encodes camera ray directions and extrinsic poses into the attention mechanism, and (3) Latent 3D-REPA, which distills 3D-aware features from frozen 3D foundation models to ensure 3D consistency. Built upon a DiT-based world foundation model, PAIWorld achieves state-of-the-art multi-view 3D consistency on robotic manipulation benchmarks, ranking 1st on the WorldArena leaderboard and 2nd on the AgiBot-Challenge2026 leaderboard, while enabling downstream applications such as model-based planning, world action models, and multi-view policy post-training.

Global visual geolocation predicts where an image was captured on Earth. Since images vary in how precisely they can be localized, this task inherently involves a significant degree of ambiguity. However, existing approaches are deterministic and overlook this aspect. In this paper, we aim to close the gap between traditional geolocalization and modern generative methods. We propose the first generative geolocation approach based on diffusion and Riemannian flow matching, where the denoising process operates directly on the Earth's surface. Our model achieves state-of-the-art performance on three visual geolocation benchmarks: OpenStreetView-5M, YFCC-100M, and iNat21. In addition, we introduce the task of probabilistic visual geolocation, where the model predicts a probability distribution over all possible locations instead of a single point. We introduce new metrics and baselines for this task, demonstrating the advantages of our diffusion-based approach. Codes and models will be made available.

Micro Aerial Vehicles (MAVs) that operate in unstructured, unexplored environments require fast and flexible local planning, which can replan when new parts of the map are explored. Trajectory optimization methods fulfill these needs, but require obstacle distance information, which can be given by Euclidean Signed Distance Fields (ESDFs). We propose a method to incrementally build ESDFs from Truncated Signed Distance Fields (TSDFs), a common implicit surface representation used in computer graphics and vision. TSDFs are fast to build and smooth out sensor noise over many observations, and are designed to produce surface meshes. Meshes allow human operators to get a better assessment of the robot's environment, and set high-level mission goals. We show that we can build TSDFs faster than Octomaps, and that it is more accurate to build ESDFs out of TSDFs than occupancy maps. Our complete system, called voxblox, will be available as open source and runs in real-time on a single CPU core. We validate our approach on-board an MAV, by using our system with a trajectory optimization local planner, entirely on-board and in real-time.

Image-to-3D methods often trade off faithfulness and completeness: depth estimators are anchored to input pixels but stop at the visible surface, while image-to-3D models generate complete shapes that are often misaligned with the input. We introduce World Tracing, a generative pixel-aligned geometry representation that predicts 3D points aligned with observed pixels while completing geometry beyond the visible surface. For each input pixel, World Tracing predicts an ordered stack of camera-space 3D points, where the first layer represents the visible surface and subsequent layers represent front-to-back intersections with occluded surfaces. We instantiate this representation with a world-tracing diffusion transformer, WT-DiT, which treats multiple geometry layers as separate denoising tokens coupled through factorized and global attention. WT-DiT is trained with pixel-space flow matching and a mixed noise schedule that balances visible-surface reconstruction with occluded-geometry generation. World Tracing achieves strong performance on visible-surface reconstruction and complete geometry generation across object, scene, and dynamic benchmarks, outperforming both depth predictors and image-to-3D generators. It also preserves 2D-to-3D correspondence, enabling text-driven 3D scene editing, geometry-conditioned novel-view video synthesis, and training-free integration with textured-mesh generators.

Wildfire burned-area mapping is essential for damage assessment, emissions modeling, and understanding fire-climate interactions across diverse ecological regions. Recent geospatial foundation models provide strong general-purpose representations for satellite imagery, yet there is still no clear understanding of how to efficiently adapt these models for downstream Earth observation tasks, particularly under geographic and temporal domain shift. This study evaluates three state-of-the-art Geospatial Foundation Models (GFMs) - Terramind, DINOv3, and Prithvi-v2 - for burned-area mapping across the United States and Canada using Sentinel-2 data. Leveraging 3,820 wildfire events from 2017-2023, we conduct spatial and temporal generalization tests across diverse biomes. We systematically compare full fine-tuning, decoder-only fine-tuning, and Low-Rank Adaptation (LoRA) for adapting each model. Across all experiments, LoRA provides the strongest cross-domain generalization while updating less than 1% of parameters, demonstrating a favorable trade-off between accuracy and efficiency. Prithvi-v2 with LoRA achieves the highest overall accuracy and the largest improvement compared to full fine-tuning. These findings indicate that geospatial foundation models, when adapted using lightweight parameter-efficient methods such as LoRA, offer a robust and scalable solution for large-scale burned-area mapping. Code is available at https://github.com/alishibli97/wildfire-lora-gfm.

Point cloud sequences are commonly used to accurately detect 3D objects in applications such as autonomous driving. Current top-performing multi-frame detectors mostly follow a Detect-and-Fuse framework, which extracts features from each frame of the sequence and fuses them to detect the objects in the current frame. However, this inevitably leads to redundant computation since adjacent frames are highly correlated. In this paper, we propose an efficient Motion-guided Sequential Fusion (MSF) method, which exploits the continuity of object motion to mine useful sequential contexts for object detection in the current frame. We first generate 3D proposals on the current frame and propagate them to preceding frames based on the estimated velocities. The points-of-interest are then pooled from the sequence and encoded as proposal features. A novel Bidirectional Feature Aggregation (BiFA) module is further proposed to facilitate the interactions of proposal features across frames. Besides, we optimize the point cloud pooling by a voxel-based sampling technique so that millions of points can be processed in several milliseconds. The proposed MSF method achieves not only better efficiency than other multi-frame detectors but also leading accuracy, with 83.12% and 78.30% mAP on the LEVEL1 and LEVEL2 test sets of Waymo Open Dataset, respectively. Codes can be found at https://github.com/skyhehe123/MSF.

This paper introduces TopoDiffuser, a diffusion-based framework for multimodal trajectory prediction that incorporates topometric maps to generate accurate, diverse, and road-compliant future motion forecasts. By embedding structural cues from topometric maps into the denoising process of a conditional diffusion model, the proposed approach enables trajectory generation that naturally adheres to road geometry without relying on explicit constraints. A multimodal conditioning encoder fuses LiDAR observations, historical motion, and route information into a unified bird's-eye-view (BEV) representation. Extensive experiments on the KITTI benchmark demonstrate that TopoDiffuser outperforms state-of-the-art methods, while maintaining strong geometric consistency. Ablation studies further validate the contribution of each input modality, as well as the impact of denoising steps and the number of trajectory samples. To support future research, we publicly release our code at https://github.com/EI-Nav/TopoDiffuser.

Landslide monitoring is essential for understanding geohazards and mitigating associated risks. However, existing point cloud-based methods typically rely on either geometric or radiometric information and often yield sparse or non-3D displacement estimates. In this paper, we propose a hierarchical partition-based coarse-to-fine approach that fuses 3D point clouds and co-registered RGB images to estimate dense 3D displacement vector fields. We construct patch-level matches using both 3D geometry and 2D image features. These matches are refined via geometric consistency checks, followed by rigid transformation estimation per match. Experimental results on two real-world landslide datasets demonstrate that our method produces 3D displacement estimates with high spatial coverage (79% and 97%) and high accuracy. Deviations in displacement magnitude with respect to external measurements (total station or GNSS observations) are 0.15 m and 0.25 m on the two datasets, respectively, and only 0.07 m and 0.20 m compared to manually derived references. These values are below the average scan resolutions (0.08 m and 0.30 m). Our method outperforms the state-of-the-art method F2S3 in spatial coverage while maintaining comparable accuracy. Our approach offers a practical and adaptable solution for TLS-based landslide monitoring and is extensible to other types of point clouds and monitoring tasks. Our example data and source code are publicly available at https://github.com/zhaoyiww/fusion4landslide.

Geospatial foundation models (GFMs) differ widely in pretraining objective, modality and resolution, and none leads across benchmarks. We ask whether their representations are complementary, and whether a single encoder can inherit that complementarity. We introduce Pangaea-Latents, an extension of the Pangaea benchmark providing frozen embeddings of 5 GFMs over its 11 datasets, along with reproduced baselines, and find GFM embeddings to be neither redundant nor disjoint. We then propose GeoMixture, a preliminary framework to align a ViT to several GFMs per dataset through a multi-representation alignment (mREPA) objective. Our encoder ties the best GFM in average rank across nine Pangaea datasets, trading peak performance for cross-task consistency.

A sample of 60,410 bona fide optical quasars with astrometric proper motions in Gaia EDR3 and spectroscopic redshifts above 0.5 in an oval 8400 square degree area of the sky is constructed. Using orthogonal Zernike functions of polar coordinates, the proper motion fields are fitted in a weighted least-squares adjustment of the entire sample and of six equal bins of sorted redshifts. The overall fit with 37 Zernike functions reveals a statistically significant pattern, which is likely to be of instrumental origin. The main feature of this pattern is a chain of peaks and dips mostly in the R.A. component with an amplitude of 25~muas yr^{-1}. This field is subtracted from each of the six analogous fits for quasars grouped by redshifts covering the range 0.5 through 7.03, with median values 0.72, 1.00, 1.25, 1.52, 1.83, 2.34. The resulting residual patterns are noisier, with formal uncertainties up to 8~muas yr^{-1} in the central part of the area. We detect a single high-confidence Zernike term for R.A. proper motion components of quasars with redshifts around 1.52 representing a general gradient of 30 muas yr^{-1} over 150degr on the sky. We do not find any small- or medium-scale systemic variations of the residual proper motion field as functions of redshift above the 2.5,sigma significance level.

Estimating 3D geometry from monocular colonoscopy images is challenging due to non-Lambertian surfaces, moving light sources, and large textureless regions. While recent 3D geometric foundation models eliminate the need for multi-stage pipelines, their performance deteriorates in clinical scenes. These models are primarily trained on natural scene datasets and struggle with specularity and homogeneous textures typical in colonoscopy, leading to inaccurate geometry estimation. In this paper, we present ColonAdapter, a self-supervised fine-tuning framework that adapts geometric foundation models for colonoscopy geometry estimation. Our method leverages pretrained geometric priors while tailoring them to clinical data. To improve performance in low-texture regions and ensure scale consistency, we introduce a Detail Restoration Module (DRM) and a geometry consistency loss. Furthermore, a confidence-weighted photometric loss enhances training stability in clinical environments. Experiments on both synthetic and real datasets demonstrate that our approach achieves state-of-the-art performance in camera pose estimation, monocular depth prediction, and dense 3D point map reconstruction, without requiring ground-truth intrinsic parameters.

Dimensionality reduction is a fundamental task that aims to simplify complex data by reducing its feature dimensionality while preserving essential patterns, with core applications in data analysis and visualisation. To preserve the underlying data structure, multi-dimensional scaling (MDS) methods focus on preserving pairwise dissimilarities, such as distances. They optimise the embedding to have pairwise distances as close as possible to the data dissimilarities. However, the current standard is limited to embedding data in Riemannian manifolds. Motivated by the lack of asymmetry in the Riemannian metric of the embedding space, this paper extends the MDS problem to a natural asymmetric generalisation of Riemannian manifolds called Finsler manifolds. Inspired by Euclidean space, we define a canonical Finsler space for embedding asymmetric data. Due to its simplicity with respect to geodesics, data representation in this space is both intuitive and simple to analyse. We demonstrate that our generalisation benefits from the same theoretical convergence guarantees. We reveal the effectiveness of our Finsler embedding across various types of non-symmetric data, highlighting its value in applications such as data visualisation, dimensionality reduction, directed graph embedding, and link prediction.

We introduce Geo4D, a method to repurpose video diffusion models for monocular 3D reconstruction of dynamic scenes. By leveraging the strong dynamic prior captured by such video models, Geo4D can be trained using only synthetic data while generalizing well to real data in a zero-shot manner. Geo4D predicts several complementary geometric modalities, namely point, depth, and ray maps. It uses a new multi-modal alignment algorithm to align and fuse these modalities, as well as multiple sliding windows, at inference time, thus obtaining robust and accurate 4D reconstruction of long videos. Extensive experiments across multiple benchmarks show that Geo4D significantly surpasses state-of-the-art video depth estimation methods, including recent methods such as MonST3R, which are also designed to handle dynamic scenes.

We revisit the geometric theory of defects. In the differential-geometric models of defects that have been adopted since the 1950s, dislocations have been associated with torsion, disclinations with the full curvature, and point defects with the first kind trace of non-metricity. The mainstream formulation exhibits several conceptual and technical shortcomings, most notably a hierarchy inconsistency, the non-exictence of a genuine metric formulation, and the potential emergence of Ostrogradsky-type instabilities. These issues have motivated us to develop a new framework, namely a generalized teleparallel geometric theory of defects. In our model, dislocations are identified with the trace of torsion, disclinations with the second kind trace of the non-metricity, and point defects with the first kind trace of the non-metricity. In addition, we retain the scalar part torsion as a free parameter for describing some possible unknown degrees of freedom in the theory of defects. The proposed geometric theory of defects is free from all of the aforementioned drawbacks and is therefore worthy of further investigation. To ensure the coherence and completeness of the discussion, we begin our analysis with elastic deformations, then summarize the existing metric-affine geometric theory of defects, and finally proceed to our original contribution, namely the new theory introduced here. We formulate the entire theory in Eulerian coordinates. Naturally, all results can be reformulated in Lagrangian coordinates as well. All analyses and formulae are expressed in the language of exterior algebra and are carried out in coordinate-independent orthonormal frames.

Foundation models for Earth systems have so far been trained primarily on physical climate and weather data, with limited representation of the human systems that both drive and respond to environmental change. The lack of a unified global training resource that combines climate, land, ocean, cryosphere, infrastructure, hazards, and socioeconomic data on a common grid hinders progress toward truly multimodal Earth system foundation models. We present WorldTensor, a harmonised global dataset that aligns hundreds of environmental and socioeconomic variables to a standardised 0.25^circ spatial grid and annual temporal framework. WorldTensor integrates reanalysis products, remote sensing, emissions inventories, land use reconstructions, hydrological observations, infrastructure and hazard datasets, and socioeconomic indicators within a single representation designed for machine learning workflows. To build the dataset, we regridded inputs across heterogeneous native resolutions and projections, rasterised point and vector datasets into spatially meaningful gridded fields, and reconciled temporal coverages ranging from daily observations to sparse multiyear socioeconomic snapshots. All outputs are distributed as NetCDF files with standardised coordinates, variable metadata, and a common CF metadata convention. WorldTensor provides a reproducible resource for training and evaluating foundation models that learn coupled dynamics across environmental and human systems at planetary scale.

Cross-view geo-localization (CVGL) aims to establish spatial correspondences between images captured from significantly different viewpoints and constitutes a fundamental technique for visual localization in GNSS-denied environments. Nevertheless, CVGL remains challenging due to severe geometric asymmetry, texture inconsistency across imaging domains, and the progressive degradation of discriminative local information. Existing methods predominantly rely on spatial domain feature alignment, which is inherently sensitive to large scale viewpoint variations and local disturbances. To alleviate these limitations, this paper proposes the Spatial and Frequency Domain Enhancement Network (SFDE), which leverages complementary representations from spatial and frequency domains. SFDE adopts a three branch parallel architecture to model global semantic context, local geometric structure, and statistical stability in the frequency domain, respectively, thereby characterizing consistency across domains from the perspectives of scene topology, multiscale structural patterns, and frequency invariance. The resulting complementary features are jointly optimized in a unified embedding space via progressive enhancement and coupled constraints, enabling the learning of cross-view representations with consistency across multiple granularities. Comprehensive experiments show that SFDE achieves competitive performance and in many cases even surpasses state-of-the-art methods, while maintaining a lightweight and computationally efficient design. {Our code is available at https://github.com/Mashuaishuai669/SFDE

A defining problem of the Anthropocene is to model the physical Earth and human societies as one coupled system, yet no learned representation spans their observational breadth. We argue the obstacle is geometric: the physical Earth is measured as continuous fields that ignore political borders, whereas societies are reported for administrative units. Earth-system foundation models serve the first geometry; coupling it to the second has required lossy averaging over borders. We introduce TerraNova, a foundation model trained on 1,024 physical and societal records in their native geometries: 512 gridded Earth-system fields and 512 national indicators. Dedicated encoders represent location, country, time and task, cross-modal transformers fuse them into a shared spatiotemporal state, and a hypernetwork generates a per-query decoder whose evidential head returns a predictive distribution. Two contrastive objectives couple the representation: a population-weighted alignment between each country and coordinates in its territory, and one to pretrained geospatial embeddings carrying image-derived semantics. Read out through that decoder, the representation is competitive with purpose-built geospatial encoders while spanning axes they do not represent (time, oceans and uncertainty) and supporting country-level capabilities. The frozen backbone reconstructs dense fields from sparse observations and adapts to unseen variables in minutes on consumer hardware.

Geo-Foundational Models (GFMs) enable fast and reliable extraction of spatiotemporal information from satellite imagery, improving flood inundation mapping by leveraging location and time embeddings. Despite their potential, it remains unclear whether GFMs outperform traditional models like U-Net. A systematic comparison across sensors and data availability scenarios is still lacking, which is an essential step to guide end-users in model selection. To address this, we evaluate three GFMs, Prithvi 2.0, Clay V1.5, DOFA, and UViT (a Prithvi variant), against TransNorm, U-Net, and Attention U-Net using PlanetScope, Sentinel-1, and Sentinel-2. We observe competitive performance among all GFMs, with only 2-5% variation between the best and worst models across sensors. Clay outperforms others on PlanetScope (0.79 mIoU) and Sentinel-2 (0.70), while Prithvi leads on Sentinel-1 (0.57). In leave-one-region-out cross-validation across five regions, Clay shows slightly better performance across all sensors (mIoU: 0.72(0.04), 0.66(0.07), 0.51(0.08)) compared to Prithvi (0.70(0.05), 0.64(0.09), 0.49(0.13)) and DOFA (0.67(0.07), 0.64(0.04), 0.49(0.09)) for PlanetScope, Sentinel-2, and Sentinel-1, respectively. Across all 19 sites, leave-one-region-out cross-validation reveals a 4% improvement by Clay compared to U-Net. Visual inspection highlights Clay's superior ability to retain fine details. Few-shot experiments show Clay achieves 0.64 mIoU on PlanetScope with just five training images, outperforming Prithvi (0.24) and DOFA (0.35). In terms of computational time, Clay is a better choice due to its smaller model size (26M parameters), making it ~3x faster than Prithvi (650M) and 2x faster than DOFA (410M). Contrary to previous findings, our results suggest GFMs offer small to moderate improvements in flood mapping accuracy at lower computational cost and labeling effort compared to traditional U-Net.

Leveraging representation encoders for generative modeling offers a path for efficient, high-fidelity synthesis. However, standard diffusion transformers fail to converge on these representations directly. While recent work attributes this to a capacity bottleneck proposing computationally expensive width scaling of diffusion transformers we demonstrate that the failure is fundamentally geometric. We identify Geometric Interference as the root cause: standard Euclidean flow matching forces probability paths through the low-density interior of the hyperspherical feature space of representation encoders, rather than following the manifold surface. To resolve this, we propose Riemannian Flow Matching with Jacobi Regularization (RJF). By constraining the generative process to the manifold geodesics and correcting for curvature-induced error propagation, RJF enables standard Diffusion Transformer architectures to converge without width scaling. Our method RJF enables the standard DiT-B architecture (131M parameters) to converge effectively, achieving an FID of 3.37 where prior methods fail to converge. Code: https://github.com/amandpkr/RJF

Point cloud registration is challenging in the presence of heavy outlier correspondences. This paper focuses on addressing the robust correspondence-based registration problem with gravity prior that often arises in practice. The gravity directions are typically obtained by inertial measurement units (IMUs) and can reduce the degree of freedom (DOF) of rotation from 3 to 1. We propose a novel transformation decoupling strategy by leveraging screw theory. This strategy decomposes the original 4-DOF problem into three sub-problems with 1-DOF, 2-DOF, and 1-DOF, respectively, thereby enhancing the computation efficiency. Specifically, the first 1-DOF represents the translation along the rotation axis and we propose an interval stabbing-based method to solve it. The second 2-DOF represents the pole which is an auxiliary variable in screw theory and we utilize a branch-and-bound method to solve it. The last 1-DOF represents the rotation angle and we propose a global voting method for its estimation. The proposed method sequentially solves three consensus maximization sub-problems, leading to efficient and deterministic registration. In particular, it can even handle the correspondence-free registration problem due to its significant robustness. Extensive experiments on both synthetic and real-world datasets demonstrate that our method is more efficient and robust than state-of-the-art methods, even when dealing with outlier rates exceeding 99%.

Cross-modal Thermal Geo-localization (TG) provides an illumination-robust positioning solution for Unmanned Aerial Vehicles (UAVs) in Global Navigation Satellite System (GNSS)-denied environments. However, existing thermal geo-localization methods mainly focus on near-nadir observations or depend on map-side elevation priors, limiting their applicability to continuous oblique thermal localization with only geo-referenced 2D satellite maps. To address this problem, we propose ScalLoc, a scale-aligned local-to-map localization framework for continuous oblique thermal UAV geo-localization. ScalLoc follows a reconstruction--refinement--anchoring--propagation design: it reconstructs local window geometry from thermal sequences, refines camera poses using track-based pose optimization, adaptively anchors each window to the satellite map, and propagates validated states to recover frame-level global trajectories. To support systematic evaluation, we construct Thermal-Oblique, a real thermal UAV sequence dataset containing 216 urban and rural day--night trajectories and 28,112 thermal frames with frame-level annotations. Extensive experiments demonstrate that ScalLoc reduces the mean localization error from 112.69 m to 26.97 m compared with the VGGT-only configuration, corresponding to a 76.07% reduction, and achieves the lowest frame-weighted mean position error among the compared methods. These results demonstrate the feasibility of continuous oblique thermal geo-localization using only lightweight 2D satellite maps, without requiring digital surface models or preconstructed 3D maps. Code and dataset are available at https://github.com/FloralHercules/ScalLoc.

We introduce a multi-fidelity estimator of covariance matrices that employs the log-Euclidean geometry of the symmetric positive-definite manifold. The estimator fuses samples from a hierarchy of data sources of differing fidelities and costs for variance reduction while guaranteeing definiteness, in contrast with previous approaches. The new estimator makes covariance estimation tractable in applications where simulation or data collection is expensive; to that end, we develop an optimal sample allocation scheme that minimizes the mean-squared error of the estimator given a fixed budget. Guaranteed definiteness is crucial to metric learning, data assimilation, and other downstream tasks. Evaluations of our approach using data from physical applications (heat conduction, fluid dynamics) demonstrate more accurate metric learning and speedups of more than one order of magnitude compared to benchmarks.

While multimodal reasoning has advanced rapidly, solving complex geometry problems critically hinges on active visual assistance, such as constructing auxiliary lines, spurring the rise of Visual Chain-of-Thought (VCoT). However, existing evaluations typically assess visual generation quality and final answer accuracy in isolation, failing to examine whether intermediate visual aids are geometrically valid, effectively utilized in subsequent reasoning, or causally responsible for task success. To bridge this gap, we introduce GeoVAD-Bench, a diagnostic benchmark that pairs a fine-grained five-dimensional trajectory diagnosis covering perception, auxiliary quality, utilization, deductive reasoning, and final correctness with controlled No-Aux, Auto-Aux, and GT-Aux intervention settings to systematically isolate intermediate error modes, the causal gains of visual aids, and the resulting autonomy gap. Our findings reveal that while high-quality auxiliary aids offer substantial theoretical gains for geometric problem solving, autonomous generation is frequently hampered by compounding errors across geometric perception, faithful visual manipulation, visual-state grounding, and deductive reasoning. Guided by these diagnostic insights, we establish a specialized data construction pipeline encompassing geometric perception, diagram editing, and interleaved visual-textual reasoning trajectories, and develop a progressive SFT and multimodal RL training framework. The resulting model, GeoWeave-8B, outperforms the base model by +25.3% in final geometric accuracy and achieves a +30.4% gain in process average across the four intermediate diagnostic dimensions.

Hyperbolic geometry is gaining traction in machine learning for its effectiveness at capturing hierarchical structures in real-world data. Hyperbolic spaces, where neighborhoods grow exponentially, offer substantial advantages and consistently deliver state-of-the-art results across diverse applications. However, hyperbolic classifiers often grapple with computational challenges. Methods reliant on Riemannian optimization frequently exhibit sluggishness, stemming from the increased computational demands of operations on Riemannian manifolds. In response to these challenges, we present hyperDT, a novel extension of decision tree algorithms into hyperbolic space. Crucially, hyperDT eliminates the need for computationally intensive Riemannian optimization, numerically unstable exponential and logarithmic maps, or pairwise comparisons between points by leveraging inner products to adapt Euclidean decision tree algorithms to hyperbolic space. Our approach is conceptually straightforward and maintains constant-time decision complexity while mitigating the scalability issues inherent in high-dimensional Euclidean spaces. Building upon hyperDT we introduce hyperRF, a hyperbolic random forest model. Extensive benchmarking across diverse datasets underscores the superior performance of these models, providing a swift, precise, accurate, and user-friendly toolkit for hyperbolic data analysis.

Accurate perception of the vehicle's 3D surroundings, including fine-scale road geometry, such as bumps, slopes, and surface irregularities, is essential for safe and comfortable vehicle control. However, conventional monocular depth estimation often oversmooths these features, losing critical information for motion planning and stability. To address this, we introduce Gamma-from-Mono (GfM), a lightweight monocular geometry estimation method that resolves the projective ambiguity in single-camera reconstruction by decoupling global and local structure. GfM predicts a dominant road surface plane together with residual variations expressed by gamma, a dimensionless measure of vertical deviation from the plane, defined as the ratio of a point's height above it to its depth from the camera, and grounded in established planar parallax geometry. With only the camera's height above ground, this representation deterministically recovers metric depth via a closed form, avoiding full extrinsic calibration and naturally prioritizing near-road detail. Its physically interpretable formulation makes it well suited for self-supervised learning, eliminating the need for large annotated datasets. Evaluated on KITTI and the Road Surface Reconstruction Dataset (RSRD), GfM achieves state-of-the-art near-field accuracy in both depth and gamma estimation while maintaining competitive global depth performance. Our lightweight 8.88M-parameter model adapts robustly across diverse camera setups and, to our knowledge, is the first self-supervised monocular approach evaluated on RSRD.

Matching objectives underpin the success of modern generative models and rely on constructing conditional paths that transform a source distribution into a target distribution. Despite being a fundamental building block, conditional paths have been designed principally under the assumption of Euclidean geometry, resulting in straight interpolations. However, this can be particularly restrictive for tasks such as trajectory inference, where straight paths might lie outside the data manifold, thus failing to capture the underlying dynamics giving rise to the observed marginals. In this paper, we propose Metric Flow Matching (MFM), a novel simulation-free framework for conditional flow matching where interpolants are approximate geodesics learned by minimizing the kinetic energy of a data-induced Riemannian metric. This way, the generative model matches vector fields on the data manifold, which corresponds to lower uncertainty and more meaningful interpolations. We prescribe general metrics to instantiate MFM, independent of the task, and test it on a suite of challenging problems including LiDAR navigation, unpaired image translation, and modeling cellular dynamics. We observe that MFM outperforms the Euclidean baselines, particularly achieving SOTA on single-cell trajectory prediction.

Research on geospatial foundation models (GFMs) has become a trending topic in geospatial artificial intelligence (AI) research due to their potential for achieving high generalizability and domain adaptability, reducing model training costs for individual researchers. Unlike large language models, such as ChatGPT, constructing visual foundation models for image analysis, particularly in remote sensing, encountered significant challenges such as formulating diverse vision tasks into a general problem framework. This paper evaluates the recently released NASA-IBM GFM Prithvi for its predictive performance on high-level image analysis tasks across multiple benchmark datasets. Prithvi was selected because it is one of the first open-source GFMs trained on time-series of high-resolution remote sensing imagery. A series of experiments were designed to assess Prithvi's performance as compared to other pre-trained task-specific AI models in geospatial image analysis. New strategies, including band adaptation, multi-scale feature generation, and fine-tuning techniques, are introduced and integrated into an image analysis pipeline to enhance Prithvi's domain adaptation capability and improve model performance. In-depth analyses reveal Prithvi's strengths and weaknesses, offering insights for both improving Prithvi and developing future visual foundation models for geospatial tasks.

This paper investigates the generalization of Principal Component Analysis (PCA) to Riemannian manifolds. We first propose a new and general type of family of subspaces in manifolds that we call barycentric subspaces. They are implicitly defined as the locus of points which are weighted means of k+1 reference points. As this definition relies on points and not on tangent vectors, it can also be extended to geodesic spaces which are not Riemannian. For instance, in stratified spaces, it naturally allows principal subspaces that span several strata, which is impossible in previous generalizations of PCA. We show that barycentric subspaces locally define a submanifold of dimension k which generalizes geodesic subspaces.Second, we rephrase PCA in Euclidean spaces as an optimization on flags of linear subspaces (a hierarchy of properly embedded linear subspaces of increasing dimension). We show that the Euclidean PCA minimizes the Accumulated Unexplained Variances by all the subspaces of the flag (AUV). Barycentric subspaces are naturally nested, allowing the construction of hierarchically nested subspaces. Optimizing the AUV criterion to optimally approximate data points with flags of affine spans in Riemannian manifolds lead to a particularly appealing generalization of PCA on manifolds called Barycentric Subspaces Analysis (BSA).

Streaming geometric foundation models are emerging as a compelling alternative to SLAM systems. Yet this streaming nature introduces a fundamental issue: each prediction is made from limited context, which is vulnerable to dynamic objects and weak textures. Small local errors accumulate into severe geometric distortion and long-horizon scale drift. We argue that reliable streaming reconstruction requires geometric foundation models to be not only predictive, but also self-correcting. We introduce SURE-Map, a self-correcting framework built upon two complementary principles. First, we explicitly model cross-view geometric uncertainty. Unlike conventional depth or point confidence, which primarily reflects the reliability of individual-view prediction, our uncertainty directly measures whether the jointly predicted pose and depth induce geometrically consistent cross-view pixel correspondences. Second, because local correction alone cannot eliminate slowly accumulating scale errors, we introduce multi-timescale self-correction: fast consecutive-frame inference preserves streaming efficiency, while sparse keyframe-window inference provides longer-range geometric evidence to periodically recalibrate the scale of recent trajectories. SURE-Map establishes new state-of-the-art performance for online feed-forward reconstruction across long-horizon benchmarks, reducing ATE-RMSE from 24.00 to 17.24 m on KITTI, 5.11 to 4.74 m on Oxford Spires, and 31.37 to 28.58 m on VBR, with further improvements to 15.17, 4.63, and 22.12 m when incorporating loop-closure refinement. Project page: https://mingkai-liu.github.io/projects/sure-map/.

Channel Charting (CC) has emerged as a promising framework for data-driven radio localization, yet existing approaches often struggle to scale globally and to handle the distortions introduced by non-line-of-sight (NLoS) conditions. In this work, we propose a novel CC method that leverages Channel Impulse Response (CIR) data enriched with practical features such as Time Difference of Arrival (TDoA) and Transmission Reception Point (TRP) locations, enabling a self-supervised localization function on a global scale. The proposed framework is further enhanced with short-interval User Equipment (UE) displacement measurements, which improve the continuity and robustness of the learned positioning function. Our algorithm incorporates a mechanism to identify and mask NLoS-induced noisy measurements, leading to significant performance gains. We present the evaluations of our proposed models in a real 5G testbed and benchmarked against centimeter-accurate Real-Time Kinematic (RTK) positioning, in an O-RAN--based 5G network by OpenAirInterface (OAI) software at EURECOM. It demonstrated outperforming results against the state-of-the-art semi-supervised and self-supervised CC approaches in a real-world scenario. The results show localization accuracies of 2-4 meters in 90% of cases, across a range of NLoS ratios. Furthermore, we provide public datasets of CIR recordings, along with the true position labels used in this paper's evaluation.

Videos inherently represent 2D projections of a dynamic 3D world. However, our analysis suggests that video diffusion models trained solely on raw video data often fail to capture meaningful geometric-aware structure in their learned representations. To bridge this gap between video diffusion models and the underlying 3D nature of the physical world, we propose Geometry Forcing, a simple yet effective method that encourages video diffusion models to internalize latent 3D representations. Our key insight is to guide the model's intermediate representations toward geometry-aware structure by aligning them with features from a pretrained geometric foundation model. To this end, we introduce two complementary alignment objectives: Angular Alignment, which enforces directional consistency via cosine similarity, and Scale Alignment, which preserves scale-related information by regressing unnormalized geometric features from normalized diffusion representation. We evaluate Geometry Forcing on both camera view-conditioned and action-conditioned video generation tasks. Experimental results demonstrate that our method substantially improves visual quality and 3D consistency over the baseline methods. Project page: https://GeometryForcing.github.io.

In this work, we propose StereoGeo, an end-to-end network-based approach for stereo camera calibration. Our method estimates the focal lengths and gravity directions of the left and right cameras, as well as the relative extrinsic transformation relating them. Existing methods often rely on calibration patterns in structured environments or address only a single camera configuration, being limited to either intrinsic or extrinsic estimation, and depending on a multi-view setups. StereoGeo extends the GeoCalib algorithm, integrating deep neural network feature extraction with a differentiable optimizer. Extensive experiments on real-world benchmarks demonstrate that StereoGeo achieves competitive performance for intrinsic calibration and provides accurate stereo extrinsic estimation, outperforming existing methods that are limited to monocular settings. The dataset used in this work is partially publicly available at https://github.com/meddourimane/StereoGeo-dataset.

Empowered by large-scale training, vision-language models (VLMs) achieve strong image and video understanding, yet their ability to perform spatial reasoning in both static scenes and dynamic videos remains limited. Recent advances try to handle this limitation by injecting geometry tokens from pretrained 3D foundation models into VLMs. Nevertheless, we observe that naive token fusion followed by standard fine-tuning in this line of work often leaves such geometric cues underutilized for spatial reasoning, as VLMs tend to rely heavily on 2D visual cues. In this paper, we propose GeoSR, a framework designed to make geometry matter by encouraging VLMs to actively reason with geometry tokens. GeoSR introduces two key components: (1) Geometry-Unleashing Masking, which strategically masks portions of 2D vision tokens during training to weaken non-geometric shortcuts and force the model to consult geometry tokens for spatial reasoning; and (2) Geometry-Guided Fusion, a gated routing mechanism that adaptively amplifies geometry token contributions in regions where geometric evidence is critical. Together, these designs unleash the potential of geometry tokens for spatial reasoning tasks. Extensive experiments on both static and dynamic spatial reasoning benchmarks demonstrate that GeoSR consistently outperforms prior methods and establishes new state-of-the-art performance by effectively leveraging geometric information. The project page is available at https://suhzhang.github.io/GeoSR/.

We introduce GeoDANO, a geometric vision-language model (VLM) with a domain-agnostic vision encoder, for solving plane geometry problems. Although VLMs have been employed for solving geometry problems, their ability to recognize geometric features remains insufficiently analyzed. To address this gap, we propose a benchmark that evaluates the recognition of visual geometric features, including primitives such as dots and lines, and relations such as orthogonality. Our preliminary study shows that vision encoders often used in general-purpose VLMs, e.g., OpenCLIP, fail to detect these features and struggle to generalize across domains. We develop GeoCLIP, a CLIP based model trained on synthetic geometric diagram-caption pairs to overcome the limitation. Benchmark results show that GeoCLIP outperforms existing vision encoders in recognizing geometric features. We then propose our VLM, GeoDANO, which augments GeoCLIP with a domain adaptation strategy for unseen diagram styles. GeoDANO outperforms specialized methods for plane geometry problems and GPT-4o on MathVerse.

Recent advances in Visual Language Models (VLMs) have demonstrated exceptional performance in visual reasoning tasks. However, geo-localization presents unique challenges, requiring the extraction of multigranular visual cues from images and their integration with external world knowledge for systematic reasoning. Current approaches to geo-localization tasks often lack robust reasoning mechanisms and explainability, limiting their effectiveness. To address these limitations, we propose the Geo Reason Enhancement (GRE) Suite, a novel framework that augments VLMs with structured reasoning chains for accurate and interpretable location inference. The GRE Suite is systematically developed across three key dimensions: dataset, model, and benchmark. First, we introduce GRE30K, a high-quality geo-localization reasoning dataset designed to facilitate fine-grained visual and contextual analysis. Next, we present the GRE model, which employs a multi-stage reasoning strategy to progressively infer scene attributes, local details, and semantic features, thereby narrowing down potential geographic regions with enhanced precision. Finally, we construct the Geo Reason Evaluation Benchmark (GREval-Bench), a comprehensive evaluation framework that assesses VLMs across diverse urban, natural, and landmark scenes to measure both coarse-grained (e.g., country, continent) and fine-grained (e.g., city, street) localization performance. Experimental results demonstrate that GRE significantly outperforms existing methods across all granularities of geo-localization tasks, underscoring the efficacy of reasoning-augmented VLMs in complex geographic inference. Code and data will be released at https://github.com/Thorin215/GRE.

Monocular geometry estimation has recently achieved impressive performance across diverse scenes. However, state-of-the-art models still face notable distortion in local 3D structure, especially in fine details, like thin structures and small objects. We attribute this limitation to an architectural mismatch: most current models decode 3D geometry within a 2D parameterization, where feature interactions are governed by image-plane proximity rather than true 3D spatial relationships. This inadvertently mixes features from geometrically distant surfaces, resulting in over-smoothed geometry particularly around thin or elongated structure. In this paper, we propose MoGe-3, a fine-detail monocular geometry estimation model with Self-Guided Sparse 3D Refinement (SSR) that lifts monocular geometry modeling from 2D image space to 3D space for high-fidelity metric-scale point maps. MoGe-3 lifts the coarse point map from a foundation base model onto a sparse voxel shell and refines it via SSR. The SSR employs sparse convolutions that aggregate features based on 3D spatial locality, avoiding feature mixing across depth discontinuities. Extensive experiments on diverse datasets demonstrate that MoGe-3 significantly outperforms existing approaches in recovering fine detailed 3D geometry across both quantitative metrics and qualitative visualizations. Project page: https://qft-333.github.io/moge3page/

While numerous recent benchmarks focus on evaluating generic Vision-Language Models (VLMs), they fall short in addressing the unique demands of geospatial applications. Generic VLM benchmarks are not designed to handle the complexities of geospatial data, which is critical for applications such as environmental monitoring, urban planning, and disaster management. Some of the unique challenges in geospatial domain include temporal analysis for changes, counting objects in large quantities, detecting tiny objects, and understanding relationships between entities occurring in Remote Sensing imagery. To address this gap in the geospatial domain, we present GEOBench-VLM, a comprehensive benchmark specifically designed to evaluate VLMs on geospatial tasks, including scene understanding, object counting, localization, fine-grained categorization, and temporal analysis. Our benchmark features over 10,000 manually verified instructions and covers a diverse set of variations in visual conditions, object type, and scale. We evaluate several state-of-the-art VLMs to assess their accuracy within the geospatial context. The results indicate that although existing VLMs demonstrate potential, they face challenges when dealing with geospatial-specific examples, highlighting the room for further improvements. Specifically, the best-performing GPT4o achieves only 40\% accuracy on MCQs, which is only double the random guess performance. Our benchmark is publicly available at https://github.com/The-AI-Alliance/GEO-Bench-VLM .

Despite the remarkable developments achieved by recent 3D generation works, scaling these methods to geographic extents, such as modeling thousands of square kilometers of Earth's surface, remains an open challenge. We address this through a dual innovation in data infrastructure and model architecture. First, we introduce Aerial-Earth3D, the largest 3D aerial dataset to date, consisting of 50k curated scenes (each measuring 600m x 600m) captured across the U.S. mainland, comprising 45M multi-view Google Earth frames. Each scene provides pose-annotated multi-view images, depth maps, normals, semantic segmentation, and camera poses, with explicit quality control to ensure terrain diversity. Building on this foundation, we propose EarthCrafter, a tailored framework for large-scale 3D Earth generation via sparse-decoupled latent diffusion. Our architecture separates structural and textural generation: 1) Dual sparse 3D-VAEs compress high-resolution geometric voxels and textural 2D Gaussian Splats (2DGS) into compact latent spaces, largely alleviating the costly computation suffering from vast geographic scales while preserving critical information. 2) We propose condition-aware flow matching models trained on mixed inputs (semantics, images, or neither) to flexibly model latent geometry and texture features independently. Extensive experiments demonstrate that EarthCrafter performs substantially better in extremely large-scale generation. The framework further supports versatile applications, from semantic-guided urban layout generation to unconditional terrain synthesis, while maintaining geographic plausibility through our rich data priors from Aerial-Earth3D. Our project page is available at https://whiteinblue.github.io/earthcrafter/

Self-supervised geospatial foundation models (GeoFMs) learn transferable representations from remote sensing data, but their downstream behavior is difficult to characterize. We study six representative GeoFMs spanning joint-embedding, reconstruction, and multimodal pretraining families, and evaluate transfer across classification, regression, and segmentation benchmarks under different label availability and downstream pipelines. We find that model rankings change across tasks and adaptation settings. Layerwise probing shows that, in most cases, task-relevant information is more accessible in intermediate transformer blocks compared to final-layer embeddings, and that GeoFMs exhibit distinct depthwise profiles. In segmentation case studies on PASTIS and Sen1Floods11, downstream adaptation settings such as decoder design and fine-tuning can be as impactful as the choice of GeoFM, and standard dense-prediction heads may be poorly aligned with how GeoFMs organize information over depth. Finally, CKA analysis on case studies shows that fine-tuning does not rewrite GeoFMs uniformly across depth, and the strongest changes are localized to the first linear layer of the MLP in ViT blocks. These results help explain why GeoFM rankings shift across benchmarks and motivate more representation-aware evaluation and adaptation strategies.

Multimodal large language models (MLLMs) have made rapid progress in recent years, yet continue to struggle with low-level visual perception (LLVP) -- particularly the ability to accurately describe the geometric details of an image. This capability is crucial for applications in areas such as robotics, medical image analysis, and manufacturing. In this paper, we first introduce Geoperception, a benchmark designed to evaluate an MLLM's ability to accurately transcribe 2D geometric information from an image. Using this benchmark, we demonstrate the limitations of leading MLLMs, and then conduct a comprehensive empirical study to explore strategies for improving their performance on geometric tasks. Our findings highlight the benefits of certain model architectures, training techniques, and data strategies, including the use of high-fidelity synthetic data and multi-stage training with a data curriculum. Notably, we find that a data curriculum enables models to learn challenging geometry understanding tasks which they fail to learn from scratch. Leveraging these insights, we develop Euclid, a family of models specifically optimized for strong low-level geometric perception. Although purely trained on synthetic multimodal data, Euclid shows strong generalization ability to novel geometry shapes. For instance, Euclid outperforms the best closed-source model, Gemini-1.5-Pro, by up to 58.56% on certain Geoperception benchmark tasks and 10.65% on average across all tasks.

Radio maps (RMs) serve as a critical foundation for enabling environment-aware wireless communication, as they provide the spatial distribution of wireless channel characteristics. Despite recent progress in RM construction using data-driven approaches, most existing methods focus solely on pathloss prediction in a fixed 2D plane, neglecting key parameters such as direction of arrival (DoA), time of arrival (ToA), and vertical spatial variations. Such a limitation is primarily due to the reliance on static learning paradigms, which hinder generalization beyond the training data distribution. To address these challenges, we propose UrbanRadio3D, a large-scale, high-resolution 3D RM dataset constructed via ray tracing in realistic urban environments. UrbanRadio3D is over 37times3 larger than previous datasets across a 3D space with 3 metrics as pathloss, DoA, and ToA, forming a novel 3Dtimes33D dataset with 7times3 more height layers than prior state-of-the-art (SOTA) dataset. To benchmark 3D RM construction, a UNet with 3D convolutional operators is proposed. Moreover, we further introduce RadioDiff-3D, a diffusion-model-based generative framework utilizing the 3D convolutional architecture. RadioDiff-3D supports both radiation-aware scenarios with known transmitter locations and radiation-unaware settings based on sparse spatial observations. Extensive evaluations on UrbanRadio3D validate that RadioDiff-3D achieves superior performance in constructing rich, high-dimensional radio maps under diverse environmental dynamics. This work provides a foundational dataset and benchmark for future research in 3D environment-aware communication. The dataset is available at https://github.com/UNIC-Lab/UrbanRadio3D.

Reconstructing population dynamics is a central problem in the physical and data sciences. Often, the dynamics are modeled as a Wasserstein gradient flow (WGF): a curve of distributions driven by an energy functional. Though there are multiple mathematical characterizations of a WGF, the dominant algorithmic approach relies on the Jordan--Kinderlehrer--Otto (JKO) scheme. JKO-based methods are inflexible to time discretisation and require solving costly optimal transport problems. We take a residual approach, enforcing the continuity equations via a non-negative loss function whose minimum is the WGF. Combined with a data-fitting divergence, this gives a single global objective. This perspective unifies several existing methods and leads to a new particle-based method, stitching, that is simulation-free and robust to large gaps between observations. We demonstrate that the stitching method achieves state-of-the-art performance across trajectory inference benchmarks. For code see github.com/BasisResearch/wasserstein-residuals.

Recent advances in 3D Gaussian Splatting (3DGS) have enabled real-time, photorealistic scene reconstruction. However, conventional 3DGS frameworks typically rely on sparse point clouds derived from Structure-from-Motion (SfM), which inherently suffer from scale ambiguity, limited geometric consistency, and strong view dependency due to the lack of geometric priors. In this work, a LiDAR-centric 3D Gaussian Splatting framework is proposed that explicitly incorporates metric geometric priors into the entire Gaussian optimization process. Instead of treating LiDAR data as a passive initialization source, 3DGS optimization is reformulated as a geometry-conditioned allocation and refinement problem under a fixed representational budget. Specifically, this work introduces (i) a geometry-texture-aware allocation strategy that selectively assigns Gaussian primitives to regions with high structural or appearance complexity, (ii) a curvature-adaptive refinement mechanism that dynamically guides Gaussian splitting toward geometrically complex areas during training, and (iii) a confidence-aware metric depth regularization that anchors the reconstructed geometry to absolute scale using LiDAR measurements while maintaining optimization stability. Extensive experiments on the ScanNet++ dataset and a custom real-world dataset validate the proposed approach. The results demonstrate state-of-the-art performance in metric-scale reconstruction with high geometric fidelity.

Remote sensing foundation models (RSFMs) are commonly evaluated using aggregate metrics, which can hide systematic performance disparities across ecological regions. We introduce FairRSFM, a biome-aware benchmark for evaluating ecological group robustness in RSFMs. FairRSFM maps georeferenced samples from 14 terrestrial biome classes into six ecologically meaningful macro-groups and evaluates models under a unified frozen-backbone evaluation protocol. The benchmark covers four downstream datasets: m-EuroSAT, m-BigEarthNet, m-SA-Crop-Type, and MMEarth20K with Dynamic World label maps. Using Prithvi-EO-2.0, SatMAE, and DOFA across three random seeds, we show that aggregate performance consistently masks biome-dependent disparities across architectures and tasks. For example, Prithvi-EO-2.0 reaches 90.98% overall macro-F1 on m-EuroSAT but a mean worst-group score of only 83.72%, while m-SA-Crop-Type drops from 27.30% overall mIoU to 18.47% in the Xeric and Mineralogical group. We further evaluate Biome-Orthogonal Linear Probing (BOLP), Dynamic Biome Reweighting (DBR), and GroupDRO as complementary mitigation baselines. Their effectiveness is model- and task-dependent; for example, BOLP improves Prithvi-EO-2.0 worst-group F1@opt on m-BigEarthNet from 46.12% to 50.27% without updating the RSFM backbone. FairRSFM provides a reusable protocol for diagnosing and mitigating ecological robustness gaps in remote sensing foundation models. Code and datasets are available at: https://github.com/aminurhossain/FairRSFM.

Scale-aware monocular depth estimation poses a significant challenge in computer-aided endoscopic navigation. However, existing depth estimation methods that do not consider the geometric priors struggle to learn the absolute scale from training with monocular endoscopic sequences. Additionally, conventional methods face difficulties in accurately estimating details on tissue and instruments boundaries. In this paper, we tackle these problems by proposing a novel enhanced scale-aware framework that only uses monocular images with geometric modeling for depth estimation. Specifically, we first propose a multi-resolution depth fusion strategy to enhance the quality of monocular depth estimation. To recover the precise scale between relative depth and real-world values, we further calculate the 3D poses of instruments in the endoscopic scenes by algebraic geometry based on the image-only geometric primitives (i.e., boundaries and tip of instruments). Afterwards, the 3D poses of surgical instruments enable the scale recovery of relative depth maps. By coupling scale factors and relative depth estimation, the scale-aware depth of the monocular endoscopic scenes can be estimated. We evaluate the pipeline on in-house endoscopic surgery videos and simulated data. The results demonstrate that our method can learn the absolute scale with geometric modeling and accurately estimate scale-aware depth for monocular scenes.

Learning feature representations of geographical space is vital for any machine learning model that integrates geolocated data, spanning application domains such as remote sensing, ecology, or epidemiology. Recent work mostly embeds coordinates using sine and cosine projections based on Double Fourier Sphere (DFS) features -- these embeddings assume a rectangular data domain even on global data, which can lead to artifacts, especially at the poles. At the same time, relatively little attention has been paid to the exact design of the neural network architectures these functional embeddings are combined with. This work proposes a novel location encoder for globally distributed geographic data that combines spherical harmonic basis functions, natively defined on spherical surfaces, with sinusoidal representation networks (SirenNets) that can be interpreted as learned Double Fourier Sphere embedding. We systematically evaluate the cross-product of positional embeddings and neural network architectures across various classification and regression benchmarks and synthetic evaluation datasets. In contrast to previous approaches that require the combination of both positional encoding and neural networks to learn meaningful representations, we show that both spherical harmonics and sinusoidal representation networks are competitive on their own but set state-of-the-art performances across tasks when combined. We provide source code at www.github.com/marccoru/locationencoder

Recent 3D geometric foundation models, such as VGGT, provide robust feed-forward 3D reconstruction by directly predicting camera poses and 3D scene points from input images. However, their results remain inaccurate, and scaling them to long sequences or large unordered image sets typically requires chunk-wise processing, which can introduce drift and inconsistency. We present Glob3R, a global SfM-style reconstruction built on 3D foundation models. Our key idea is to explicitly optimize feed-forward geometric predictions. To this end, we augment a frozen Pi3X backbone with a lightweight dense matching head that predicts image warps between selected reference frames and neighboring views. These dense warps are converted into sparse but reliable multi-view feature tracks, which provide correspondence constraints for global optimization. We further introduce a keyframe-based sliding-window association strategy that propagates tracks and relative poses across overlapping windows, enabling scalable reconstruction. Finally, we perform global motion averaging and bundle adjustment to refine camera poses, reduce scale inconsistencies, and recover dense scene geometry. Extensive experiments on indoor, outdoor, large-scale driving, and unordered SfM benchmarks demonstrate that Glob3R achieves robust and accurate reconstruction. It consistently improves over feed-forward foundation-model baselines and recent scalable reconstruction methods, while being more robust than classical SfM pipelines. The refined poses also lead to higher-quality neural rendering, validating the benefit of combining foundation-model priors with global geometric optimization. Project page: https://junyuandeng.github.io/Glob3r

Existing geometry-aware Multimodal Large Language Models (MLLMs) increasingly rely on external 3D encoders to provide structural priors, but executing these additional encoder paths at inference introduces substantial latency and computational overhead. We propose GeoThinker-F, an efficient framework that internalizes spatiotemporal perception by transforming causal MLLM hidden states into predictive latent world representations. Our key insight is that intermediate semantic representations contain sufficient information to predict useful representations of current geometry and future semantics, without requiring an exact reproduction of features from a dedicated 3D encoder. To realize this idea, GeoThinker-F adopts a decoupled two-stage training strategy. In the first stage, the MLLM backbone is frozen while lightweight Latent Frame Prediction (LFP) heads learn from an offline 3D geometry expert and next-frame semantic targets. In the second stage, the external expert is removed, and the model is jointly optimized to generate and selectively integrate its self-predicted priors through a specialized Spatial-Grounded Temporal (SGT) Fusion module. Extensive evaluations show that GeoThinker-F eliminates runtime dependence on external 3D geometry encoders while maintaining competitive performance across diverse spatial intelligence benchmarks. It achieves up to a 3.6times inference speedup, reducing latency from 1.45,s to 0.40,s while retaining strong spatial reasoning performance.

Recent advances in Multimodal Large Language Models (MLLMs) have achieved remarkable progress in general domains and demonstrated promise in multimodal mathematical reasoning. However, applying MLLMs to geometry problem solving (GPS) remains challenging due to lack of accurate step-by-step solution data and severe hallucinations during reasoning. In this paper, we propose GeoGen, a pipeline that can automatically generates step-wise reasoning paths for geometry diagrams. By leveraging the precise symbolic reasoning, GeoGen produces large-scale, high-quality question-answer pairs. To further enhance the logical reasoning ability of MLLMs, we train GeoLogic, a Large Language Model (LLM) using synthetic data generated by GeoGen. Serving as a bridge between natural language and symbolic systems, GeoLogic enables symbolic tools to help verifying MLLM outputs, making the reasoning process more rigorous and alleviating hallucinations. Experimental results show that our approach consistently improves the performance of MLLMs, achieving remarkable results on benchmarks for geometric reasoning tasks. This improvement stems from our integration of the strengths of LLMs and symbolic systems, which enables a more reliable and interpretable approach for the GPS task. Codes are available at https://github.com/ycpNotFound/GeoGen.

Recent generative AI models have achieved remarkable breakthroughs in language and visual understanding. However, although these models can generate realistic visual content, their spatial scale remains confined to bounded environments, preventing them from capturing how geographic environments evolve across thousands of kilometers or from modeling the spatial structure of the large-scale physical world. This limitation poses a critical challenge for ultra-wide-area spatial intelligence in Earth observation and simulation, revealing a deeper gap in generative AI: progress has relied primarily on scaling model parameters and training data, while overlooking spatial scale as a core dimension of intelligence. Here, motivated by this missing dimension, we investigate spatial scale as a new scaling axis in foundation models and present MetaEarth3D, the first generative foundation model capable of spatially consistent generation at the planetary scale. Taking optical Earth observation simulation as a testbed, MetaEarth3D enables the generation of multi-level, unbounded, and diverse 3D scenes spanning large-scale terrains, medium-scale cities, and fine-grained street blocks. Built upon 10 million globally distributed real-world training images, MetaEarth3D demonstrates both strong visual realism and geospatial statistical realism. Beyond generation, MetaEarth3D serves as a generative data engine for diverse virtual environments in ultra-wide spatial intelligence. We argue that this study may help empower next-generation spatial intelligence for Earth observation.

Geo-Foundation Models (GFMs) have been evaluated across diverse Earth observation task including multiple domains and have demonstrated strong potential of producing reliable maps even with sparse labels. However, benchmarking GFMs for Cryosphere applications has remained limited, primarily due to the lack of suitable evaluation datasets. To address this gap, we introduce Cryo-Bench, a benchmark compiled to evaluate GFM performance across key Cryospheric components. Cryo-Bench includes debris-covered glaciers, glacial lakes, sea ice, and calving fronts, spanning multiple sensors and broad geographic regions. We evaluate 14 GFMs alongside UNet and ViT baselines to assess their advantages, limitations, and optimal usage strategies. With a frozen encoder, UNet achieves the highest average mIoU of 66.38, followed by TerraMind at 64.02 across five evluation dataset included in Cryo-Bench. In the few-shot setting (10\% input data), GFMs such as DOFA and TerraMind outperform UNet, achieving mIoU scores of 59.53, 56.62, and 56.60, respectively, comapred to U-Net's 56.60. When fully finetuning GFMs, we observe inconsistent performance across datasets and models. However, tuning learning rate along with finetuning substantially improves GFM performance. For example, evaluation on two representative datasets (GLID and CaFFe) shows an average relative improvement of 12.77\%. Despite having minimal Cryosphere representation in their pretraining data, GFMs exhibit notable domain adaptation capabilities and produce meaningful results across tasks. Based on our findings, We recommend encoder fine-tuning with hyperparameter optimization optimization to achieve the best possible performance, while using frozen encoders when users need quick results without extensive experimentation.(https://github.com/Sk-2103/Cryo-Bench{GitHub}).

Vision-language models (VLMs) have advanced rapidly, yet their capacity for image-grounded geolocation in open-world conditions, a task that is challenging and of demand in real life, has not been comprehensively evaluated. We present EarthWhere, a comprehensive benchmark for VLM image geolocation that evaluates visual recognition, step-by-step reasoning, and evidence use. EarthWhere comprises 810 globally distributed images across two complementary geolocation scales: WhereCountry (i.e., 500 multiple-choice question-answering, with country-level answer and panoramas) and WhereStreet (i.e., 310 fine-grained street-level identification tasks requiring multi-step reasoning with optional web search). For evaluation, we adopt the final-prediction metrics: location accuracies within k km (Acc@k) for coordinates and hierarchical path scores for textual localization. Beyond this, we propose to explicitly score intermediate reasoning chains using human-verified key visual clues and a Shapley-reweighted thinking score that attributes credit to each clue's marginal contribution. We benchmark 13 state-of-the-art VLMs with web searching tools on our EarthWhere and report different types of final answer accuracies as well as the calibrated model thinking scores. Overall, Gemini-2.5-Pro achieves the best average accuracy at 56.32%, while the strongest open-weight model, GLM-4.5V, reaches 34.71%. We reveal that web search and reasoning do not guarantee improved performance when visual clues are limited, and models exhibit regional biases, achieving up to 42.7% higher scores in certain areas than others. These findings highlight not only the promise but also the persistent challenges of models to mitigate bias and achieve robust, fine-grained localization. We open-source our benchmark at https://github.com/UCSC-VLAA/EarthWhere.

In this paper, we propose a novel LiDAR(-inertial) odometry and mapping framework to achieve the goal of simultaneous localization and meshing in real-time. This proposed framework termed ImMesh comprises four tightly-coupled modules: receiver, localization, meshing, and broadcaster. The localization module utilizes the prepossessed sensor data from the receiver, estimates the sensor pose online by registering LiDAR scans to maps, and dynamically grows the map. Then, our meshing module takes the registered LiDAR scan for incrementally reconstructing the triangle mesh on the fly. Finally, the real-time odometry, map, and mesh are published via our broadcaster. The key contribution of this work is the meshing module, which represents a scene by an efficient hierarchical voxels structure, performs fast finding of voxels observed by new scans, and reconstructs triangle facets in each voxel in an incremental manner. This voxel-wise meshing operation is delicately designed for the purpose of efficiency; it first performs a dimension reduction by projecting 3D points to a 2D local plane contained in the voxel, and then executes the meshing operation with pull, commit and push steps for incremental reconstruction of triangle facets. To the best of our knowledge, this is the first work in literature that can reconstruct online the triangle mesh of large-scale scenes, just relying on a standard CPU without GPU acceleration. To share our findings and make contributions to the community, we make our code publicly available on our GitHub: https://github.com/hku-mars/ImMesh.

Do contemporary diffusion models preserve the class geometry of hyperspherical data? Standard diffusion models rely on isotropic Gaussian noise in the forward process, inherently favoring Euclidean spaces. However, many real-world problems involve non-Euclidean distributions, such as hyperspherical manifolds, where class-specific patterns are governed by angular geometry within hypercones. When modeled in Euclidean space, these angular subtleties are lost, leading to suboptimal generative performance. To address this limitation, we introduce HyperSphereDiff to align hyperspherical structures with directional noise, preserving class geometry and effectively capturing angular uncertainty. We demonstrate both theoretically and empirically that this approach aligns the generative process with the intrinsic geometry of hyperspherical data, resulting in more accurate and geometry-aware generative models. We evaluate our framework on four object datasets and two face datasets, showing that incorporating angular uncertainty better preserves the underlying hyperspherical manifold. Resources are available at: {https://github.com/IAB-IITJ/Harmonizing-Geometry-and-Uncertainty-Diffusion-with-Hyperspheres/}

This paper presents a novel grid-based NeRF called F2-NeRF (Fast-Free-NeRF) for novel view synthesis, which enables arbitrary input camera trajectories and only costs a few minutes for training. Existing fast grid-based NeRF training frameworks, like Instant-NGP, Plenoxels, DVGO, or TensoRF, are mainly designed for bounded scenes and rely on space warping to handle unbounded scenes. Existing two widely-used space-warping methods are only designed for the forward-facing trajectory or the 360-degree object-centric trajectory but cannot process arbitrary trajectories. In this paper, we delve deep into the mechanism of space warping to handle unbounded scenes. Based on our analysis, we further propose a novel space-warping method called perspective warping, which allows us to handle arbitrary trajectories in the grid-based NeRF framework. Extensive experiments demonstrate that F2-NeRF is able to use the same perspective warping to render high-quality images on two standard datasets and a new free trajectory dataset collected by us. Project page: https://totoro97.github.io/projects/f2-nerf.

Geometry problem-solving (GPS), a challenging task requiring both visual comprehension and symbolic reasoning, effectively measures the reasoning capabilities of multimodal large language models (MLLMs). Humans exhibit strong reasoning ability in this task through accurate identification and adaptive application of geometric principles within visual contexts. However, existing benchmarks fail to jointly assess both dimensions of the human-like geometric reasoning mechanism in MLLMs, remaining a critical gap in assessing their ability to tackle GPS. To this end, we introduce GeoSense, the first comprehensive bilingual benchmark designed to systematically evaluate the geometric reasoning abilities of MLLMs through the lens of geometric principles. GeoSense features a five-level hierarchical framework of geometric principles spanning plane and solid geometry, an intricately annotated dataset of 1,789 problems, and an innovative evaluation strategy. Through extensive experiments on GeoSense with various open-source and closed-source MLLMs, we observe that Gemini-2.0-pro-flash performs best, achieving an overall score of 65.3. Our in-depth analysis reveals that the identification and application of geometric principles remain a bottleneck for leading MLLMs, jointly hindering their reasoning abilities. These findings underscore GeoSense's potential to guide future advancements in MLLMs' geometric reasoning capabilities, paving the way for more robust and human-like reasoning in artificial intelligence.

Feed-forward 3D foundation models reconstruct perspective scenes in one pass. Satellite photogrammetry needs a different product, one that domain adaptation alone does not deliver: dense surface height in an absolute geodetic frame under non-central rational polynomial cameras (RPCs). Perspective-pretrained features are not reliably observable along RPC height rays, absolute elevation carries a low-order height--datum gauge exchangeable with sensor bias to first order, and monocular and multi-view cues fail in different regions. treats all three. Lightweight ray-consistent adapters make a frozen backbone matchable along native RPC rays. An explicit datum mechanism separates relief from absolute level and is equivariant to the vertical origin by construction, so one trained model serves zero-, one-, and sparse-control inference. Calibrated inverse-variance fusion combines the two relief streams. , our absolute-frame benchmark of eighteen systems across in-domain, cross-dataset, and cross-city tiers, scores absolute placement without registration or test-reference leakage. On 26 held-out US3D tiles, attains 2.99\,m absolute MAE at 91.9% coverage, improves completeness-aware accuracy by 46.4 points over the strongest compliant feed-forward baseline, remains the most accurate such system under both transfer shifts, and runs in 24\,s model-forward time per tile. Code and models will be released at https://github.com/HIT-SIRS/GeoRay

Geospatial foundation models aim to learn representations that transfer across regions and sensors, yet evaluating them on specific tasks requires large, high-quality, multi-modal benchmarks that measure how well such models extract value from data. Concerning flood mapping, existing datasets rarely combine bi-temporal SAR and co-registered optical imagery at scale, leaving the value of foundation models for this downstream task largely untested. We introduce GEOID-Flood, a large-scale multi-modal flood segmentation benchmark, derived from Copernicus Emergency Management Service activations, spanning 219 events across 65 countries over ten years. The dataset provides more than 14,000 tiles with co-registered pre- and post-event Sentinel-1, in GRD and RTC format, pre-event Sentinel-2 composite, and DEM, including manually validated labels that separate background from permanent water and flooded water. Using this benchmark, we evaluate foundation models against conventional encoders across single-image, multi-temporal, and multi-modal protocols. We report three main findings: foundation models offer a consistent but modest advantage; optical-SAR fusion with finetuning best resolves transient flooding; and models trained on GEOID-Flood transfer to unseen events better than those trained on existing datasets. Dataset and code available at https://github.com/links-ads/geoid-flood.

We propose Riemannian Flow Matching (RFM), a simple yet powerful framework for training continuous normalizing flows on manifolds. Existing methods for generative modeling on manifolds either require expensive simulation, are inherently unable to scale to high dimensions, or use approximations for limiting quantities that result in biased training objectives. Riemannian Flow Matching bypasses these limitations and offers several advantages over previous approaches: it is simulation-free on simple geometries, does not require divergence computation, and computes its target vector field in closed-form. The key ingredient behind RFM is the construction of a relatively simple premetric for defining target vector fields, which encompasses the existing Euclidean case. To extend to general geometries, we rely on the use of spectral decompositions to efficiently compute premetrics on the fly. Our method achieves state-of-the-art performance on many real-world non-Euclidean datasets, and we demonstrate tractable training on general geometries, including triangular meshes with highly non-trivial curvature and boundaries.

In this paper, we introduce a novel approach to fine-grained cross-view geo-localization. Our method aligns a warped ground image with a corresponding GPS-tagged satellite image covering the same area using homography estimation. We first employ a differentiable spherical transform, adhering to geometric principles, to accurately align the perspective of the ground image with the satellite map. This transformation effectively places ground and aerial images in the same view and on the same plane, reducing the task to an image alignment problem. To address challenges such as occlusion, small overlapping range, and seasonal variations, we propose a robust correlation-aware homography estimator to align similar parts of the transformed ground image with the satellite image. Our method achieves sub-pixel resolution and meter-level GPS accuracy by mapping the center point of the transformed ground image to the satellite image using a homography matrix and determining the orientation of the ground camera using a point above the central axis. Operating at a speed of 30 FPS, our method outperforms state-of-the-art techniques, reducing the mean metric localization error by 21.3% and 32.4% in same-area and cross-area generalization tasks on the VIGOR benchmark, respectively, and by 34.4% on the KITTI benchmark in same-area evaluation.

This study introduces a novel framework, G3Reg, for fast and robust global registration of LiDAR point clouds. In contrast to conventional complex keypoints and descriptors, we extract fundamental geometric primitives, including planes, clusters, and lines (PCL) from the raw point cloud to obtain low-level semantic segments. Each segment is represented as a unified Gaussian Ellipsoid Model (GEM), using a probability ellipsoid to ensure the ground truth centers are encompassed with a certain degree of probability. Utilizing these GEMs, we present a distrust-and-verify scheme based on a Pyramid Compatibility Graph for Global Registration (PAGOR). Specifically, we establish an upper bound, which can be traversed based on the confidence level for compatibility testing to construct the pyramid graph. Then, we solve multiple maximum cliques (MAC) for each level of the pyramid graph, thus generating the corresponding transformation candidates. In the verification phase, we adopt a precise and efficient metric for point cloud alignment quality, founded on geometric primitives, to identify the optimal candidate. The algorithm's performance is validated on three publicly available datasets and a self-collected multi-session dataset. Parameter settings remained unchanged during the experiment evaluations. The results exhibit superior robustness and real-time performance of the G3Reg framework compared to state-of-the-art methods. Furthermore, we demonstrate the potential for integrating individual GEM and PAGOR components into other registration frameworks to enhance their efficacy. Code: https://github.com/HKUST-Aerial-Robotics/G3Reg

Recent works on 3D reconstruction from posed images have demonstrated that direct inference of scene-level 3D geometry without test-time optimization is feasible using deep neural networks, showing remarkable promise and high efficiency. However, the reconstructed geometry, typically represented as a 3D truncated signed distance function (TSDF), is often coarse without fine geometric details. To address this problem, we propose three effective solutions for improving the fidelity of inference-based 3D reconstructions. We first present a resolution-agnostic TSDF supervision strategy to provide the network with a more accurate learning signal during training, avoiding the pitfalls of TSDF interpolation seen in previous work. We then introduce a depth guidance strategy using multi-view depth estimates to enhance the scene representation and recover more accurate surfaces. Finally, we develop a novel architecture for the final layers of the network, conditioning the output TSDF prediction on high-resolution image features in addition to coarse voxel features, enabling sharper reconstruction of fine details. Our method, FineRecon, produces smooth and highly accurate reconstructions, showing significant improvements across multiple depth and 3D reconstruction metrics.

Foundation models (FMs) for the Earth system learn statistical relationships between physical variables across massive datasets to enable versatile downstream applications through finetuning, separating them from task-specific weather models. Here, we introduce Earth System Foundation Model (ESFM), a fully open model building on the 3D Swin UNet backbone of the pioneering Aurora model. ESFM introduces extensions that increase functionality and foster adoption in climate sciences. First, the encoding scheme and training protocols have been extended to handle diverse datasets, including those containing missing values across all spatio-temporal dimensions such as satellite data, as well as station data, all under one backbone. Axial attention is introduced to capture inter-variable dependencies. As a result ESFM skillfully predicts variables in regions or on pressure levels where no data is present at the initial time, while preserving inter-variable relationships, for example between temperature, pressure, and humidity. Individual variable tokenization enables different sets of variables to be shuffled during training and simplifies the process of building extensions for new downstream tasks. Adaptive layer norm-based ensembles allow for a simple yet effective way to transform deterministic ESFM to a probabilistic FM. We present findings using dense gridded data (ERA5, CMIP6), regionally masked dense data, sparse gridded MODIS satellite data, and station data. Results demonstrate competitive or superior performance relative to state-of-the-art benchmarks. Case studies of Super Typhoon Doksuri (2023) and 2024 sudden stratospheric warming events show accurate positional and magnitude estimations of extreme weather. ESFM retains the strengths of previous foundation models, such as long-term stability, but facilitates application to a variety of downstream tasks.

Energy-based predictive world models provide a powerful approach for multi-step visual planning by reasoning over latent energy landscapes rather than generating pixels. However, existing approaches face two major challenges: (i) their latent representations are typically learned in Euclidean space, neglecting the underlying geometric and hierarchical structure among states, and (ii) they struggle with long-horizon prediction, which leads to rapid degradation across extended rollouts. To address these challenges, we introduce GeoWorld, a geometric world model that preserves geometric structure and hierarchical relations through a Hyperbolic JEPA, which maps latent representations from Euclidean space onto hyperbolic manifolds. We further introduce Geometric Reinforcement Learning for energy-based optimization, enabling stable multi-step planning in hyperbolic latent space. Extensive experiments on CrossTask and COIN demonstrate around 3% SR improvement in 3-step planning and 2% SR improvement in 4-step planning compared to the state-of-the-art V-JEPA 2. Project website: https://steve-zeyu-zhang.github.io/GeoWorld.

Video diffusion models increasingly serve as priors for 4D generation, but the generated videos often lack geometric consistency. Recent approaches address this through post-training by designing geometric rewards, yet this can degrade texture and fine detail, requiring auxiliary appearance rewards and careful reward balancing. To address this challenge, we propose GeoFix, a unified framework that improves geometric consistency and visual quality with a single geometric reward, applicable to both training and inference-time reward alignment. Our reward measures cross-view depth consistency in static scene regions, targeting structural inconsistencies without directly constraining appearance or penalizing valid object motion. Crucially, depth agreement increases with camera field-of-view overlap even in real videos and 4D datasets, allowing a smaller camera movement to be mistaken for better geometry. We account for this effect by calibrating the reward against the overlap-dependent trend. GeoFix achieves a 39% improvement in WorldScore 3D consistency and a 4% increase in VBench Quality Score.